path: root/doc/clzip.info

This is clzip.info, produced by makeinfo version 4.13+ from clzip.texi.

INFO-DIR-SECTION Compression
START-INFO-DIR-ENTRY
* Clzip: (clzip).               LZMA lossless data compressor
END-INFO-DIR-ENTRY


File: clzip.info,  Node: Top,  Next: Introduction,  Up: (dir)

Clzip Manual
************

This manual is for Clzip (version 1.14, 22 January 2024).

* Menu:

* Introduction::           Purpose and features of clzip
* Output::                 Meaning of clzip's output
* Invoking clzip::         Command-line interface
* Quality assurance::      Design, development, and testing of lzip
* Algorithm::              How clzip compresses the data
* File format::            Detailed format of the compressed file
* Stream format::          Format of the LZMA stream in lzip files
* Trailing data::          Extra data appended to the file
* Examples::               A small tutorial with examples
* Problems::               Reporting bugs
* Reference source code::  Source code illustrating stream format
* Concept index::          Index of concepts


   Copyright (C) 2010-2024 Antonio Diaz Diaz.

   This manual is free documentation: you have unlimited permission to copy,
distribute, and modify it.


File: clzip.info,  Node: Introduction,  Next: Output,  Prev: Top,  Up: Top

1 Introduction
**************

Clzip is a C language version of lzip, compatible with lzip 1.4 or newer.
As clzip is written in C, it may be easier to integrate in applications like
package managers, embedded devices, or systems lacking a C++ compiler.

   Lzip is a lossless data compressor with a user interface similar to the
one of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov
chain-Algorithm' (LZMA) stream format to maximize interoperability. The
maximum dictionary size is 512 MiB so that any lzip file can be decompressed
on 32-bit machines. Lzip provides accurate and robust 3-factor integrity
checking. Lzip can compress about as fast as gzip (lzip -0) or compress most
files more than bzip2 (lzip -9). Decompression speed is intermediate between
gzip and bzip2. Lzip is better than gzip and bzip2 from a data recovery
perspective. Lzip has been designed, written, and tested with great care to
replace gzip and bzip2 as the standard general-purpose compressed format for
Unix-like systems.

   For compressing/decompressing large files on multiprocessor machines
plzip can be much faster than lzip at the cost of a slightly reduced
compression ratio. *Note plzip manual: (plzip)Top.

   For creation and manipulation of compressed tar archives tarlz can be
more efficient than using tar and plzip because tarlz is able to keep the
alignment between tar members and lzip members. *Note tarlz manual:
(tarlz)Top.

   The lzip file format is designed for data sharing and long-term
archiving, taking into account both data integrity and decoder availability:

   * The lzip format provides very safe integrity checking and some data
     recovery means. The program lziprecover can repair bit flip errors
     (one of the most common forms of data corruption) in lzip files, and
     provides data recovery capabilities, including error-checked merging
     of damaged copies of a file. *Note Data safety: (lziprecover)Data
     safety.

   * The lzip format is as simple as possible (but not simpler). The lzip
     manual provides the source code of a simple decompressor along with a
     detailed explanation of how it works, so that with the only help of the
     lzip manual it would be possible for a digital archaeologist to extract
     the data from a lzip file long after quantum computers eventually
     render LZMA obsolete.

   * Additionally the lzip reference implementation is copylefted, which
     guarantees that it will remain free forever.

   A nice feature of the lzip format is that a corrupt byte is easier to
repair the nearer it is from the beginning of the file. Therefore, with the
help of lziprecover, losing an entire archive just because of a corrupt
byte near the beginning is a thing of the past.

   The member trailer stores the 32-bit CRC of the original data, the size
of the original data, and the size of the member. These values, together
with the "End Of Stream" marker, provide a 3-factor integrity checking which
guarantees that the decompressed version of the data is identical to the
original. This guards against corruption of the compressed data, and against
undetected bugs in clzip (hopefully very unlikely). The chances of data
corruption going undetected are microscopic. Be aware, though, that the
check occurs upon decompression, so it can only tell you that something is
wrong. It can't help you recover the original uncompressed data.

   Clzip uses the same well-defined exit status values used by bzip2, which
makes it safer than compressors returning ambiguous warning values (like
gzip) when it is used as a back end for other programs like tar or zutils.

   Clzip automatically uses for each file the largest dictionary size that
does not exceed neither the file size nor the limit given. Keep in mind
that the decompression memory requirement is affected at compression time
by the choice of dictionary size limit.

   The amount of memory required for compression is about 1 or 2 times the
dictionary size limit (1 if input file size is less than dictionary size
limit, else 2) plus 9 times the dictionary size really used. The option
'-0' is special and only requires about 1.5 MiB at most. The amount of
memory required for decompression is about 46 kB larger than the dictionary
size really used.

   When compressing, clzip replaces every file given in the command line
with a compressed version of itself, with the name "original_name.lz". When
decompressing, clzip attempts to guess the name for the decompressed file
from that of the compressed file as follows:

filename.lz    becomes   filename
filename.tlz   becomes   filename.tar
anyothername   becomes   anyothername.out

   (De)compressing a file is much like copying or moving it. Therefore clzip
preserves the access and modification dates, permissions, and, if you have
appropriate privileges, ownership of the file just as 'cp -p' does. (If the
user ID or the group ID can't be duplicated, the file permission bits
S_ISUID and S_ISGID are cleared).

   Clzip is able to read from some types of non-regular files if either the
option '-c' or the option '-o' is specified.

   Clzip refuses to read compressed data from a terminal or write compressed
data to a terminal, as this would be entirely incomprehensible and might
leave the terminal in an abnormal state.

   Clzip correctly decompresses a file which is the concatenation of two or
more compressed files. The result is the concatenation of the corresponding
decompressed files. Integrity testing of concatenated compressed files is
also supported.

   Clzip can produce multimember files, and lziprecover can safely recover
the undamaged members in case of file damage. Clzip can also split the
compressed output in volumes of a given size, even when reading from
standard input. This allows the direct creation of multivolume compressed
tar archives.

   Clzip is able to compress and decompress streams of unlimited size by
automatically creating multimember output. The members so created are large,
about 2 PiB each.


File: clzip.info,  Node: Output,  Next: Invoking clzip,  Prev: Introduction,  Up: Top

2 Meaning of clzip's output
***************************

The output of clzip looks like this:

     clzip -v foo
       foo:  6.676:1, 14.98% ratio, 85.02% saved, 450560 in, 67493 out.

     clzip -tvvv foo.lz
       foo.lz:  6.676:1, 14.98% ratio, 85.02% saved.  450560 out,  67493 in. ok

   The meaning of each field is as follows:

'N:1'
     The compression ratio (uncompressed_size / compressed_size), shown as
     N to 1.

'ratio'
     The inverse compression ratio (compressed_size / uncompressed_size),
     shown as a percentage. A decimal ratio is easily obtained by moving the
     decimal point two places to the left; 14.98% = 0.1498.

'saved'
     The space saved by compression (1 - ratio), shown as a percentage.

'in'
     Size of the input data. This is the uncompressed size when
     compressing, or the compressed size when decompressing or testing.
     Note that clzip always prints the uncompressed size before the
     compressed size when compressing, decompressing, testing, or listing.

'out'
     Size of the output data. This is the compressed size when compressing,
     or the decompressed size when decompressing or testing.


   When decompressing or testing at verbosity level 4 (-vvvv), the
dictionary size used to compress the file and the CRC32 of the uncompressed
data are also shown.

   LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may never
have been compressed. Decompressed is used to refer to data which have
undergone the process of decompression.


File: clzip.info,  Node: Invoking clzip,  Next: Quality assurance,  Prev: Output,  Up: Top

3 Invoking clzip
****************

The format for running clzip is:

     clzip [OPTIONS] [FILES]

If no file names are specified, clzip compresses (or decompresses) from
standard input to standard output. A hyphen '-' used as a FILE argument
means standard input. It can be mixed with other FILES and is read just
once, the first time it appears in the command line. Remember to prepend
'./' to any file name beginning with a hyphen, or use '--'.

   clzip supports the following options: *Note Argument syntax:
(arg_parser)Argument syntax.

'-h'
'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of clzip on the standard output and exit.
     This version number should be included in all bug reports.

'-a'
'--trailing-error'
     Exit with error status 2 if any remaining input is detected after
     decompressing the last member. Such remaining input is usually trailing
     garbage that can be safely ignored. *Note concat-example::.

'-b BYTES'
'--member-size=BYTES'
     When compressing, set the member size limit to BYTES. It is advisable
     to keep members smaller than RAM size so that they can be repaired with
     lziprecover in case of corruption. A small member size may degrade
     compression ratio, so use it only when needed. Valid values range from
     100 kB to 2 PiB. Defaults to 2 PiB.

'-c'
'--stdout'
     Compress or decompress to standard output; keep input files unchanged.
     If compressing several files, each file is compressed independently.
     (The output consists of a sequence of independently compressed
     members). This option (or '-o') is needed when reading from a named
     pipe (fifo) or from a device. Use it also to recover as much of the
     decompressed data as possible when decompressing a corrupt file. '-c'
     overrides '-o' and '-S'. '-c' has no effect when testing or listing.

'-d'
'--decompress'
     Decompress the files specified. The integrity of the files specified is
     checked. If a file does not exist, can't be opened, or the destination
     file already exists and '--force' has not been specified, clzip
     continues decompressing the rest of the files and exits with error
     status 1. If a file fails to decompress, or is a terminal, clzip exits
     immediately with error status 2 without decompressing the rest of the
     files. A terminal is considered an uncompressed file, and therefore
     invalid.

'-f'
'--force'
     Force overwrite of output files.

'-F'
'--recompress'
     When compressing, force re-compression of files whose name already has
     the '.lz' or '.tlz' suffix.

'-k'
'--keep'
     Keep (don't delete) input files during compression or decompression.

'-l'
'--list'
     Print the uncompressed size, compressed size, and percentage saved of
     the files specified. Trailing data are ignored. The values produced
     are correct even for multimember files. If more than one file is
     given, a final line containing the cumulative sizes is printed. With
     '-v', the dictionary size, the number of members in the file, and the
     amount of trailing data (if any) are also printed. With '-vv', the
     positions and sizes of each member in multimember files are also
     printed.

     If any file is damaged, does not exist, can't be opened, or is not
     regular, the final exit status is > 0. '-lq' can be used to check
     quickly (without decompressing) the structural integrity of the files
     specified. (Use '--test' to check the data integrity). '-alq'
     additionally checks that none of the files specified contain trailing
     data.

'-m BYTES'
'--match-length=BYTES'
     When compressing, set the match length limit in bytes. After a match
     this long is found, the search is finished. Valid values range from 5
     to 273. Larger values usually give better compression ratios but
     longer compression times.

'-o FILE'
'--output=FILE'
     If '-c' has not been also specified, write the (de)compressed output
     to FILE, automatically creating any missing parent directories; keep
     input files unchanged. If compressing several files, each file is
     compressed independently. (The output consists of a sequence of
     independently compressed members). This option (or '-c') is needed
     when reading from a named pipe (fifo) or from a device. '-o -' is
     equivalent to '-c'. '-o' has no effect when testing or listing.

     In order to keep backward compatibility with clzip versions prior to
     1.12, when compressing from standard input and no other file names are
     given, the extension '.lz' is appended to FILE unless it already ends
     in '.lz' or '.tlz'. This feature will be removed in a future version
     of clzip. Meanwhile, redirection may be used instead of '-o' to write
     the compressed output to a file without the extension '.lz' in its
     name: 'clzip < file > foo'.

     When compressing and splitting the output in volumes, FILE is used as
     a prefix, and several files named 'FILE00001.lz', 'FILE00002.lz', etc,
     are created. In this case, only one input file is allowed.

'-q'
'--quiet'
     Quiet operation. Suppress all messages.

'-s BYTES'
'--dictionary-size=BYTES'
     When compressing, set the dictionary size limit in bytes. Clzip uses
     for each file the largest dictionary size that does not exceed neither
     the file size nor this limit. Valid values range from 4 KiB to 512 MiB.
     Values 12 to 29 are interpreted as powers of two, meaning 2^12 to 2^29
     bytes. Dictionary sizes are quantized so that they can be coded in
     just one byte (*note coded-dict-size::). If the size specified does
     not match one of the valid sizes, it is rounded upwards by adding up
     to (BYTES / 8) to it.

     For maximum compression you should use a dictionary size limit as large
     as possible, but keep in mind that the decompression memory requirement
     is affected at compression time by the choice of dictionary size limit.

'-S BYTES'
'--volume-size=BYTES'
     When compressing, and '-c' has not been also specified, split the
     compressed output into several volume files with names
     'original_name00001.lz', 'original_name00002.lz', etc, and set the
     volume size limit to BYTES. Input files are kept unchanged. Each
     volume is a complete, maybe multimember, lzip file. A small volume
     size may degrade compression ratio, so use it only when needed. Valid
     values range from 100 kB to 4 EiB.

'-t'
'--test'
     Check integrity of the files specified, but don't decompress them. This
     really performs a trial decompression and throws away the result. Use
     it together with '-v' to see information about the files. If a file
     fails the test, does not exist, can't be opened, or is a terminal,
     clzip continues testing the rest of the files. A final diagnostic is
     shown at verbosity level 1 or higher if any file fails the test when
     testing multiple files.

'-v'
'--verbose'
     Verbose mode.
     When compressing, show the compression ratio and size for each file
     processed.
     When decompressing or testing, further -v's (up to 4) increase the
     verbosity level, showing status, compression ratio, dictionary size,
     trailer contents (CRC, data size, member size), and up to 6 bytes of
     trailing data (if any) both in hexadecimal and as a string of printable
     ASCII characters.
     Two or more '-v' options show the progress of (de)compression.

'-0 .. -9'
     Compression level. Set the compression parameters (dictionary size and
     match length limit) as shown in the table below. The default
     compression level is '-6', equivalent to '-s8MiB -m36'. Note that '-9'
     can be much slower than '-0'. These options have no effect when
     decompressing, testing, or listing.

     The bidimensional parameter space of LZMA can't be mapped to a linear
     scale optimal for all files. If your files are large, very repetitive,
     etc, you may need to use the options '--dictionary-size' and
     '--match-length' directly to achieve optimal performance.

     If several compression levels or '-s' or '-m' options are given, the
     last setting is used. For example '-9 -s64MiB' is equivalent to
     '-s64MiB -m273'

     Level   Dictionary size (-s)   Match length limit (-m)
     -0      64 KiB                 16 bytes
     -1      1 MiB                  5 bytes
     -2      1.5 MiB                6 bytes
     -3      2 MiB                  8 bytes
     -4      3 MiB                  12 bytes
     -5      4 MiB                  20 bytes
     -6      8 MiB                  36 bytes
     -7      16 MiB                 68 bytes
     -8      24 MiB                 132 bytes
     -9      32 MiB                 273 bytes

'--fast'
'--best'
     Aliases for GNU gzip compatibility.

'--empty-error'
     Exit with error status 2 if any empty member is found in the input
     files.

'--marking-error'
     Exit with error status 2 if the first LZMA byte is non-zero in any
     member of the input files. This may be caused by data corruption or by
     deliberate insertion of tracking information in the file. Use
     'lziprecover --clear-marking' to clear any such non-zero bytes.

'--loose-trailing'
     When decompressing, testing, or listing, allow trailing data whose
     first bytes are so similar to the magic bytes of a lzip header that
     they can be confused with a corrupt header. Use this option if a file
     triggers a "corrupt header" error and the cause is not indeed a
     corrupt header.


   Numbers given as arguments to options may be expressed in decimal,
hexadecimal, or octal (using the same syntax as integer constants in C++),
and may be followed by a multiplier and an optional 'B' for "byte".

   Table of SI and binary prefixes (unit multipliers):

Prefix   Value                      |   Prefix   Value
k        kilobyte   (10^3 = 1000)   |   Ki       kibibyte  (2^10 = 1024)
M        megabyte   (10^6)          |   Mi       mebibyte  (2^20)
G        gigabyte   (10^9)          |   Gi       gibibyte  (2^30)
T        terabyte   (10^12)         |   Ti       tebibyte  (2^40)
P        petabyte   (10^15)         |   Pi       pebibyte  (2^50)
E        exabyte    (10^18)         |   Ei       exbibyte  (2^60)
Z        zettabyte  (10^21)         |   Zi       zebibyte  (2^70)
Y        yottabyte  (10^24)         |   Yi       yobibyte  (2^80)
R        ronnabyte  (10^27)         |   Ri       robibyte  (2^90)
Q        quettabyte (10^30)         |   Qi       quebibyte (2^100)


   Exit status: 0 for a normal exit, 1 for environmental problems (file not
found, invalid command-line options, I/O errors, etc), 2 to indicate a
corrupt or invalid input file, 3 for an internal consistency error (e.g.,
bug) which caused clzip to panic.


File: clzip.info,  Node: Quality assurance,  Next: Algorithm,  Prev: Invoking clzip,  Up: Top

4 Design, development, and testing of lzip
******************************************

There are two ways of constructing a software design: One way is to make it
so simple that there are obviously no deficiencies and the other way is to
make it so complicated that there are no obvious deficiencies. The first
method is far more difficult.
-- C.A.R. Hoare

   Lzip has been designed, written, and tested with great care to replace
gzip and bzip2 as the standard general-purpose compressed format for
Unix-like systems. This chapter describes the lessons learned from these
previous formats, and their application to the design of lzip. The lzip
format specification has been reviewed carefully and is believed to be free
from design errors.


4.1 Format design
=================

When gzip was designed in 1992, computers and operating systems were much
less capable than they are today. The designers of gzip tried to work around
some of those limitations, like 8.3 file names, with additional fields in
the file format.

   Today those limitations have mostly disappeared, and the format of gzip
has proved to be unnecessarily complicated. It includes fields that were
never used, others that have lost their usefulness, and finally others that
have become too limited.

   Bzip2 was designed 5 years later, and its format is simpler than the one
of gzip.

   Probably the worst defect of the gzip format from the point of view of
data safety is the variable size of its header. If the byte at offset 3
(flags) of a gzip member gets corrupted, it may become difficult to recover
the data, even if the compressed blocks are intact, because it can't be
known with certainty where the compressed blocks begin.

   By contrast, the header of a lzip member has a fixed length of 6. The
LZMA stream in a lzip member always starts at offset 6, making it trivial to
recover the data even if the whole header becomes corrupt.

   Bzip2 also provides a header of fixed length and marks the begin and end
of each compressed block with six magic bytes, making it possible to find
the compressed blocks even in case of file damage. But bzip2 does not store
the size of each compressed block, as lzip does.

   Lziprecover is able to provide unique data recovery capabilities because
the lzip format is extraordinarily safe. The simple and safe design of the
file format complements the embedded error detection provided by the LZMA
data stream. Any distance larger than the dictionary size acts as a
forbidden symbol, allowing the decompressor to detect the approximate
position of errors, and leaving very little work for the check sequence
(CRC and data sizes) in the detection of errors. Lzip is usually able to
detect all possible bit flips in the compressed data without resorting to
the check sequence. It would be difficult to write an automatic recovery
tool like lziprecover for the gzip format. And, as far as I know, it has
never been written.

   Lzip, like gzip and bzip2, uses a CRC32 to check the integrity of the
decompressed data because it provides optimal accuracy in the detection of
errors up to a compressed size of about 16 GiB, a size larger than that of
most files. In the case of lzip, the additional detection capability of the
decompressor reduces the probability of undetected errors several million
times more, resulting in a combined integrity checking optimally accurate
for any member size produced by lzip. Preliminary results suggest that the
lzip format is safe enough to be used in critical safety avionics systems.

   The lzip format is designed for long-term archiving. Therefore it
excludes any unneeded features that may interfere with the future
extraction of the decompressed data.


4.1.1 Gzip format (mis)features not present in lzip
---------------------------------------------------

'Multiple algorithms'
     Gzip provides a CM (Compression Method) field that has never been used
     because it is a bad idea to begin with. New compression methods may
     require additional fields, making it impossible to implement new
     methods and, at the same time, keep the same format. This field does
     not solve the problem of format proliferation; it just makes the
     problem less obvious.

'Optional fields in header'
     Unless special precautions are taken, optional fields are generally a
     bad idea because they produce a header of variable size. The gzip
     header has 2 fields that, in addition to being optional, are
     zero-terminated. This means that if any byte inside the field gets
     zeroed, or if the terminating zero gets altered, gzip won't be able to
     find neither the header CRC nor the compressed blocks.

'Optional CRC for the header'
     Using an optional CRC for the header is not only a bad idea, it is an
     error; it circumvents the Hamming distance (HD) of the CRC and may
     prevent the extraction of perfectly good data. For example, if the CRC
     is used and the bit enabling it is reset by a bit flip, then the
     header seems to be intact (in spite of being corrupt) while the
     compressed blocks seem to be totally unrecoverable (in spite of being
     intact). Very misleading indeed.

'Metadata'
     The gzip format stores some metadata, like the modification time of the
     original file or the operating system on which compression took place.
     This complicates reproducible compression (obtaining identical
     compressed output from identical input).


4.1.2 Lzip format improvements over gzip and bzip2
--------------------------------------------------

'64-bit size field'
     Probably the most frequently reported shortcoming of the gzip format
     is that it only stores the least significant 32 bits of the
     uncompressed size. The size of any file larger or equal than 4 GiB
     gets truncated.

     Bzip2 does not store the uncompressed size of the file.

     The lzip format provides a 64-bit field for the uncompressed size.
     Additionally, lzip produces multimember output automatically when the
     size is too large for a single member, allowing for an unlimited
     uncompressed size.

'Distributed index'
     The lzip format provides a distributed index that, among other things,
     helps plzip to decompress several times faster than pigz and helps
     lziprecover do its job. Neither the gzip format nor the bzip2 format
     do provide an index.

     A distributed index is safer and more scalable than a monolithic
     index. The monolithic index introduces a single point of failure in
     the compressed file and may limit the number of members or the total
     uncompressed size.


4.2 Quality of implementation
=============================

Our civilization depends critically on software; it had better be quality
software.
-- Bjarne Stroustrup

'Accurate and robust error detection'
     The lzip format provides 3-factor integrity checking, and the
     decompressors report mismatches in each factor separately. This method
     detects most false positives for corruption. If just one byte in one
     factor fails but the other two factors match the data, it probably
     means that the data are intact and the corruption just affects the
     mismatching factor (CRC, data size, or member size) in the member
     trailer.

'Multiple implementations'
     Just like the lzip format provides 3-factor protection against
     undetected data corruption, the development methodology of the lzip
     family of compressors provides 3-factor protection against undetected
     programming errors.

     Three related but independent compressor implementations, lzip, clzip,
     and minilzip/lzlib, are developed concurrently. Every stable release
     of any of them is tested to check that it produces identical output to
     the other two. This guarantees that all three implement the same
     algorithm, and makes it unlikely that any of them may contain serious
     undiscovered errors. In fact, no errors have been discovered in lzip
     since 2009.

     Additionally, the three implementations have been extensively tested
     with unzcrash, valgrind, and 'american fuzzy lop' without finding a
     single vulnerability or false negative. *Note Unzcrash:
     (lziprecover)Unzcrash.

'Dictionary size'
     Lzip automatically adapts the dictionary size to the size of each file.
     In addition to reducing the amount of memory required for
     decompression, this feature also minimizes the probability of being
     affected by RAM errors during compression.

'Exit status'
     Returning a warning status of 2 is a design flaw of compress that
     leaked into the design of gzip. Both bzip2 and lzip are free from this
     flaw.



File: clzip.info,  Node: Algorithm,  Next: File format,  Prev: Quality assurance,  Up: Top

5 Algorithm
***********

In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a
concrete algorithm; it is more like "any algorithm using the LZMA coding
scheme". LZMA compression consists in describing the uncompressed data as a
succession of coding sequences from the set shown in Section 'What is
coded' (*note what-is-coded::), and then encoding them using a range
encoder. For example, the option '-0' of clzip uses the scheme in almost
the simplest way possible; issuing the longest match it can find, or a
literal byte if it can't find a match. Inversely, a much more elaborated way
of finding coding sequences of minimum size than the one currently used by
clzip could be developed, and the resulting sequence could also be coded
using the LZMA coding scheme.

   Clzip currently implements two variants of the LZMA algorithm: fast
(used by option '-0') and normal (used by all other compression levels).

   The high compression of LZMA comes from combining two basic, well-proven
compression ideas: sliding dictionaries (LZ77) and markov models (the thing
used by every compression algorithm that uses a range encoder or similar
order-0 entropy coder as its last stage) with segregation of contexts
according to what the bits are used for.

   Clzip is a two stage compressor. The first stage is a Lempel-Ziv coder,
which reduces redundancy by translating chunks of data to their
corresponding distance-length pairs. The second stage is a range encoder
that uses a different probability model for each type of data: distances,
lengths, literal bytes, etc.

   Here is how it works, step by step:

   1) The member header is written to the output stream.

   2) The first byte is coded literally, because there are no previous
bytes to which the match finder can refer to.

   3) The main encoder advances to the next byte in the input data and
calls the match finder.

   4) The match finder fills an array with the minimum distances before the
current byte where a match of a given length can be found.

   5) Go back to step 3 until a sequence (formed of pairs, repeated
distances, and literal bytes) of minimum price has been formed. Where the
price represents the number of output bits produced.

   6) The range encoder encodes the sequence produced by the main encoder
and sends the bytes produced to the output stream.

   7) Go back to step 3 until the input data are finished or until the
member or volume size limits are reached.

   8) The range encoder is flushed.

   9) The member trailer is written to the output stream.

   10) If there are more data to compress, go back to step 1.


   During compression, clzip reads data in large blocks (one dictionary
size at a time). Therefore it may block for up to tens of seconds any
process feeding data to it through a pipe. This is normal. The blocking
intervals get longer with higher compression levels because dictionary size
increases (and compression speed decreases) with compression level.

The ideas embodied in clzip are due to (at least) the following people:
Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrei Markov (for the
definition of Markov chains), G.N.N. Martin (for the definition of range
encoding), Igor Pavlov (for putting all the above together in LZMA), and
Julian Seward (for bzip2's CLI).


File: clzip.info,  Node: File format,  Next: Stream format,  Prev: Algorithm,  Up: Top

6 File format
*************

Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.
-- Antoine de Saint-Exupery


   In the diagram below, a box like this:

+---+
|   | <-- the vertical bars might be missing
+---+

   represents one byte; a box like this:

+==============+
|              |
+==============+

   represents a variable number of bytes.


   A lzip file consists of one or more independent "members" (compressed
data sets). The members simply appear one after another in the file, with no
additional information before, between, or after them. Each member can
encode in compressed form up to 16 EiB - 1 byte of uncompressed data. The
size of a multimember file is unlimited.

   Each member has the following structure:

+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | LZMA stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   All multibyte values are stored in little endian order.

'ID string (the "magic" bytes)'
     A four byte string, identifying the lzip format, with the value "LZIP"
     (0x4C, 0x5A, 0x49, 0x50).

'VN (version number, 1 byte)'
     Just in case something needs to be modified in the future. 1 for now.

'DS (coded dictionary size, 1 byte)'
     The dictionary size is calculated by taking a power of 2 (the base
     size) and subtracting from it a fraction between 0/16 and 7/16 of the
     base size.
     Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
     Bits 7-5 contain the numerator of the fraction (0 to 7) to subtract
     from the base size to obtain the dictionary size.
     Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
     Valid values for dictionary size range from 4 KiB to 512 MiB.

'LZMA stream'
     The LZMA stream, finished by an "End Of Stream" marker. Uses default
     values for encoder properties. *Note Stream format::, for a complete
     description.

'CRC32 (4 bytes)'
     Cyclic Redundancy Check (CRC) of the original uncompressed data.

'Data size (8 bytes)'
     Size of the original uncompressed data.

'Member size (8 bytes)'
     Total size of the member, including header and trailer. This field acts
     as a distributed index, improves the checking of stream integrity, and
     facilitates the safe recovery of undamaged members from multimember
     files. Lzip limits the member size to 2 PiB to prevent the data size
     field from overflowing.



File: clzip.info,  Node: Stream format,  Next: Trailing data,  Prev: File format,  Up: Top

7 Format of the LZMA stream in lzip files
*****************************************

The LZMA algorithm has three parameters, called "special LZMA properties",
to adjust it for some kinds of binary data. These parameters are:
'literal_context_bits' (with a default value of 3),
'literal_pos_state_bits' (with a default value of 0), and 'pos_state_bits'
(with a default value of 2). As a general purpose compressor, lzip only
uses the default values for these parameters. In particular
'literal_pos_state_bits' has been optimized away and does not even appear
in the code.

   Lzip finishes the LZMA stream with an "End Of Stream" (EOS) marker (the
distance-length pair 0xFFFFFFFFU, 2), which in conjunction with the 'member
size' field in the member trailer allows the checking of stream integrity.
The EOS marker is the only LZMA marker allowed in lzip files. The LZMA
stream in lzip files always has these two features (default properties and
EOS marker) and is referred to in this document as LZMA-302eos. This
simplified and marker-terminated form of the LZMA stream format has been
chosen to maximize interoperability and safety.

   The second stage of LZMA is a range encoder that uses a different
probability model for each type of symbol: distances, lengths, literal
bytes, etc. Range encoding conceptually encodes all the symbols of the
message into one number. Unlike Huffman coding, which assigns to each
symbol a bit-pattern and concatenates all the bit-patterns together, range
encoding can compress one symbol to less than one bit. Therefore the
compressed data produced by a range encoder can't be split in pieces that
could be described individually.

   It seems that the only way of describing the LZMA-302eos stream is to
describe the algorithm that decodes it. And given the many details about
the range decoder that need to be described accurately, the source code of
a real decompressor seems the only appropriate reference to use.

   What follows is a description of the decoding algorithm for LZMA-302eos
streams using as reference the source code of "lzd", an educational
decompressor for lzip files, included in appendix A. *Note Reference source
code::. Lzd is written in C++11 and can be downloaded from the lzip download
directory.


7.1 What is coded
=================

The LZMA stream includes literals, matches, and repeated matches (matches
reusing a recently used distance). There are 7 different coding sequences:

Bit sequence                Name        Description
-----------------------------------------------------------------------------
0 + byte                    literal     literal byte
1 + 0 + len + dis           match       distance-length pair
1 + 1 + 0 + 0               shortrep    1 byte match at latest used distance
1 + 1 + 0 + 1 + len         rep0        len bytes match at latest used distance
1 + 1 + 1 + 0 + len         rep1        len bytes match at second latest used
                                        distance
1 + 1 + 1 + 1 + 0 + len     rep2        len bytes match at third latest used
                                        distance
1 + 1 + 1 + 1 + 1 + len     rep3        len bytes match at fourth latest used
                                        distance


   In the following tables, multibit sequences are coded in normal order,
from most significant bit (MSB) to least significant bit (LSB), except
where noted otherwise.

   Lengths (the 'len' in the table above) are coded as follows:

Bit sequence                           Description
----------------------------------------------------------------------------
0 + 3 bits                             lengths from 2 to 9
1 + 0 + 3 bits                         lengths from 10 to 17
1 + 1 + 8 bits                         lengths from 18 to 273


   The coding of distances is a little more complicated, so I'll begin by
explaining a simpler version of the encoding.

   Imagine you need to encode a number from 0 to 2^32 - 1, and you want to
do it in a way that produces shorter codes for the smaller numbers. You may
first encode the position of the most significant bit that is set to 1,
which you may find by making a bit scan from the left (from the MSB). A
position of 0 means that the number is 0 (no bit is set), 1 means the LSB is
the first bit set (the number is 1), and 32 means the MSB is set (i.e., the
number is >= 0x80000000). Then, if the position is >= 2, you encode the
remaining position - 1 bits. Let's call these bits "direct bits" because
they are coded directly by value instead of indirectly by position.

   The inconvenient of this simple method is that it needs 6 bits to encode
the position, but it just uses 33 of the 64 possible values, wasting almost
half of the codes.

   The intelligent trick of LZMA is that it encodes in what it calls a
"slot" the position of the most significant bit set, along with the value
of the next bit, using the same 6 bits that would take to encode the
position alone. This seems to need 66 slots (twice the number of
positions), but for positions 0 and 1 there is no next bit, so the number
of slots needed is 64 (0 to 63).

   The 6 bits representing this "slot number" are then context-coded. If
the distance is >= 4, the remaining bits are encoded as follows.
'direct_bits' is the amount of remaining bits (from 1 to 30) needed to form
a complete distance, and is calculated as (slot >> 1) - 1. If a distance
needs 6 or more direct_bits, the last 4 bits are encoded separately. The
last piece (all the direct_bits for distances 4 to 127 (slots 4 to 13), or
the last 4 bits for distances >= 128 (slot >= 14)) is context-coded in
reverse order (from LSB to MSB). For distances >= 128, the
'direct_bits - 4' part is encoded with fixed 0.5 probability.

Bit sequence                           Description
----------------------------------------------------------------------------
slot                                   distances from 0 to 3
slot + direct_bits                     distances from 4 to 127
slot + (direct_bits - 4) + 4 bits      distances from 128 to 2^32 - 1


7.2 The coding contexts
=======================

These contexts ('Bit_model' in the source), are integers or arrays of
integers representing the probability of the corresponding bit being 0.

   The indices used in these arrays are:

'state'
     A state machine ('State' in the source) with 12 states (0 to 11),
     coding the latest 2 to 4 types of sequences processed. The initial
     state is 0.

'pos_state'
     Value of the 2 least significant bits of the current position in the
     decoded data.

'literal_state'
     Value of the 3 most significant bits of the latest byte decoded.

'len_state'
     Coded value of the current match length (length - 2), with a maximum
     of 3. The resulting value is in the range 0 to 3.


   The types of previous sequences corresponding to each state are shown in
the following table. '!literal' is any sequence except a literal byte.
'rep' is any one of 'rep0', 'rep1', 'rep2', or 'rep3'. The last type in
each line is the most recent.

State   Types of previous sequences
------------------------------------------------------
0       literal, literal, literal
1       match, literal, literal
2       rep or (!literal, shortrep), literal, literal
3       literal, shortrep, literal, literal
4       match, literal
5       rep or (!literal, shortrep), literal
6       literal, shortrep, literal
7       literal, match
8       literal, rep
9       literal, shortrep
10      !literal, match
11      !literal, (rep or shortrep)


   The contexts for decoding the type of coding sequence are:

Name            Indices                     Used when
----------------------------------------------------------------------------
bm_match        state, pos_state            sequence start
bm_rep          state                       after sequence 1
bm_rep0         state                       after sequence 11
bm_rep1         state                       after sequence 111
bm_rep2         state                       after sequence 1111
bm_len          state, pos_state            after sequence 110


   The contexts for decoding distances are:

Name            Indices                 Used when
----------------------------------------------------------------------------
bm_dis_slot     len_state, bit tree     distance start
bm_dis          reverse bit tree        after slots 4 to 13
bm_align        reverse bit tree        for distances >= 128, after fixed
                                        probability bits


   There are two separate sets of contexts for lengths ('Len_model' in the
source). One for normal matches, the other for repeated matches. The
contexts in each Len_model are (see 'decode_len' in the source):

Name            Indices                        Used when
---------------------------------------------------------------------------
choice1         none                           length start
choice2         none                           after sequence 1
bm_low          pos_state, bit tree            after sequence 0
bm_mid          pos_state, bit tree            after sequence 10
bm_high         bit tree                       after sequence 11


   The context array 'bm_literal' is special. In principle it acts as a
normal bit tree context, the one selected by 'literal_state'. But if the
previous decoded byte was not a literal, two other bit tree contexts are
used depending on the value of each bit in 'match_byte' (the byte at the
latest used distance), until a bit is decoded that is different from its
corresponding bit in 'match_byte'. After the first difference is found, the
rest of the byte is decoded using the normal bit tree context. (See
'decode_matched' in the source).


7.3 The range decoder
=====================

The LZMA stream is consumed one byte at a time by the range decoder. (See
'normalize' in the source). Every byte consumed produces a variable number
of decoded bits, depending on how well these bits agree with their context.
(See 'decode_bit' in the source).

   The range decoder state consists of two unsigned 32-bit variables:
'range' (representing the most significant part of the range size not yet
decoded) and 'code' (representing the current point within 'range').
'range' is initialized to 2^32 - 1, and 'code' is initialized to 0.

   The range encoder produces a first 0 byte that must be ignored by the
range decoder. (See the 'Range_decoder' constructor in the source).


7.4 Decoding and checking the LZMA stream
=========================================

After decoding the member header and obtaining the dictionary size, the
range decoder is initialized and then the LZMA decoder enters a loop (see
'decode_member' in the source) where it invokes the range decoder with the
appropriate contexts to decode the different coding sequences (matches,
repeated matches, and literal bytes), until the "End Of Stream" marker is
decoded.

   Once the "End Of Stream" marker has been decoded, the decompressor reads
and decodes the member trailer, and checks that the three integrity factors
stored there (CRC, data size, and member size) match those computed from the
data.


File: clzip.info,  Node: Trailing data,  Next: Examples,  Prev: Stream format,  Up: Top

8 Extra data appended to the file
*********************************

Sometimes extra data are found appended to a lzip file after the last
member. Such trailing data may be:

   * Padding added to make the file size a multiple of some block size, for
     example when writing to a tape. It is safe to append any amount of
     padding zero bytes to a lzip file.

   * Useful data added by the user; an "End Of File" string (to check that
     the file has not been truncated), a cryptographically secure hash, a
     description of file contents, etc. It is safe to append any amount of
     text to a lzip file as long as none of the first four bytes of the
     text matches the corresponding byte in the string "LZIP", and the text
     does not contain any zero bytes (null characters). Nonzero bytes and
     zero bytes can't be safely mixed in trailing data.

   * Garbage added by some not totally successful copy operation.

   * Malicious data added to the file in order to make its total size and
     hash value (for a chosen hash) coincide with those of another file.

   * In rare cases, trailing data could be the corrupt header of another
     member. In multimember or concatenated files the probability of
     corruption happening in the magic bytes is 5 times smaller than the
     probability of getting a false positive caused by the corruption of the
     integrity information itself. Therefore it can be considered to be
     below the noise level. Additionally, the test used by clzip to
     discriminate trailing data from a corrupt header has a Hamming
     distance (HD) of 3, and the 3 bit flips must happen in different magic
     bytes for the test to fail. In any case, the option '--trailing-error'
     guarantees that any corrupt header is detected.

   Trailing data are in no way part of the lzip file format, but tools
reading lzip files are expected to behave as correctly and usefully as
possible in the presence of trailing data.

   Trailing data can be safely ignored in most cases. In some cases, like
that of user-added data, they are expected to be ignored. In those cases
where a file containing trailing data must be rejected, the option
'--trailing-error' can be used. *Note --trailing-error::.


File: clzip.info,  Node: Examples,  Next: Problems,  Prev: Trailing data,  Up: Top

9 A small tutorial with examples
********************************

WARNING! Even if clzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
Therefore, if the data you are going to compress are important, give the
option '--keep' to clzip and don't remove the original file until you check
the compressed file with a command like 'clzip -cd file.lz | cmp file -'.
Most RAM errors happening during compression can only be detected by
comparing the compressed file with the original because the corruption
happens before clzip compresses the RAM contents, resulting in a valid
compressed file containing wrong data.


Example 1: Extract all the files from archive 'foo.tar.lz'.

       tar -xf foo.tar.lz
     or
       clzip -cd foo.tar.lz | tar -xf -


Example 2: Replace a regular file with its compressed version 'file.lz' and
show the compression ratio.

     clzip -v file


Example 3: Like example 2 but the created 'file.lz' is multimember with a
member size of 1 MiB. The compression ratio is not shown.

     clzip -b 1MiB file


Example 4: Restore a regular file from its compressed version 'file.lz'. If
the operation is successful, 'file.lz' is removed.

     clzip -d file.lz


Example 5: Check the integrity of the compressed file 'file.lz' and show
status.

     clzip -tv file.lz


Example 6: The right way of concatenating the decompressed output of two or
more compressed files. *Note Trailing data::.

     Don't do this
       cat file1.lz file2.lz file3.lz | clzip -d -
     Do this instead
       clzip -cd file1.lz file2.lz file3.lz


Example 7: Decompress 'file.lz' partially until 10 KiB of decompressed data
are produced.

     clzip -cd file.lz | dd bs=1024 count=10


Example 8: Decompress 'file.lz' partially from decompressed byte at offset
10000 to decompressed byte at offset 14999 (5000 bytes are produced).

     clzip -cd file.lz | dd bs=1000 skip=10 count=5


Example 9: Compress a whole device in /dev/sdc and send the output to
'file.lz'.

       clzip -c /dev/sdc > file.lz
     or
       clzip /dev/sdc -o file.lz


Example 10: Create a multivolume compressed tar archive with a volume size
of 1440 KiB.

     tar -c some_directory | clzip -S 1440KiB -o volume_name -


Example 11: Extract a multivolume compressed tar archive.

     clzip -cd volume_name*.lz | tar -xf -


Example 12: Create a multivolume compressed backup of a large database file
with a volume size of 650 MB, where each volume is a multimember file with
a member size of 32 MiB.

     clzip -b 32MiB -S 650MB big_db


File: clzip.info,  Node: Problems,  Next: Reference source code,  Prev: Examples,  Up: Top

10 Reporting bugs
*****************

There are probably bugs in clzip. There are certainly errors and omissions
in this manual. If you report them, they will get fixed. If you don't, no
one will ever know about them and they will remain unfixed for all
eternity, if not longer.

   If you find a bug in clzip, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find by
running 'clzip --version'.


File: clzip.info,  Node: Reference source code,  Next: Concept index,  Prev: Problems,  Up: Top

Appendix A Reference source code
********************************

/* Lzd - Educational decompressor for the lzip format
   Copyright (C) 2013-2024 Antonio Diaz Diaz.

   This program is free software. Redistribution and use in source and
   binary forms, with or without modification, are permitted provided
   that the following conditions are met:

   1. Redistributions of source code must retain the above copyright
   notice, this list of conditions, and the following disclaimer.

   2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions, and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*/
/*
   Exit status: 0 for a normal exit, 1 for environmental problems
   (file not found, invalid command-line options, I/O errors, etc), 2 to
   indicate a corrupt or invalid input file.
*/

#include <algorithm>
#include <cerrno>
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <stdint.h>
#include <unistd.h>
#if defined __MSVCRT__ || defined __OS2__ || defined __DJGPP__
#include <fcntl.h>
#include <io.h>
#endif


class State
  {
  int st;

public:
  enum { states = 12 };
  State() : st( 0 ) {}
  int operator()() const { return st; }
  bool is_char() const { return st < 7; }

  void set_char()
    {
    const int next[states] = { 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5 };
    st = next[st];
    }
  void set_match()     { st = ( st < 7 ) ? 7 : 10; }
  void set_rep()       { st = ( st < 7 ) ? 8 : 11; }
  void set_short_rep() { st = ( st < 7 ) ? 9 : 11; }
  };


enum {
  min_dictionary_size = 1 << 12,
  max_dictionary_size = 1 << 29,
  literal_context_bits = 3,
  literal_pos_state_bits = 0,				// not used
  pos_state_bits = 2,
  pos_states = 1 << pos_state_bits,
  pos_state_mask = pos_states - 1,

  len_states = 4,
  dis_slot_bits = 6,
  start_dis_model = 4,
  end_dis_model = 14,
  modeled_distances = 1 << ( end_dis_model / 2 ),	// 128
  dis_align_bits = 4,
  dis_align_size = 1 << dis_align_bits,

  len_low_bits = 3,
  len_mid_bits = 3,
  len_high_bits = 8,
  len_low_symbols = 1 << len_low_bits,
  len_mid_symbols = 1 << len_mid_bits,
  len_high_symbols = 1 << len_high_bits,
  max_len_symbols = len_low_symbols + len_mid_symbols + len_high_symbols,

  min_match_len = 2,					// must be 2

  bit_model_move_bits = 5,
  bit_model_total_bits = 11,
  bit_model_total = 1 << bit_model_total_bits };

struct Bit_model
  {
  int probability;
  Bit_model() : probability( bit_model_total / 2 ) {}
  };

struct Len_model
  {
  Bit_model choice1;
  Bit_model choice2;
  Bit_model bm_low[pos_states][len_low_symbols];
  Bit_model bm_mid[pos_states][len_mid_symbols];
  Bit_model bm_high[len_high_symbols];
  };


class CRC32
  {
  uint32_t data[256];		// Table of CRCs of all 8-bit messages.

public:
  CRC32()
    {
    for( unsigned n = 0; n < 256; ++n )
      {
      unsigned c = n;
      for( int k = 0; k < 8; ++k )
        { if( c & 1 ) c = 0xEDB88320U ^ ( c >> 1 ); else c >>= 1; }
      data[n] = c;
      }
    }

  void update_buf( uint32_t & crc, const uint8_t * const buffer,
                   const int size ) const
    {
    for( int i = 0; i < size; ++i )
      crc = data[(crc^buffer[i])&0xFF] ^ ( crc >> 8 );
    }
  };

const CRC32 crc32;


enum { header_size = 6, trailer_size = 20 };
typedef uint8_t Lzip_header[header_size]; // 0-3 magic bytes
					  //   4 version
					  //   5 coded dictionary size
typedef uint8_t Lzip_trailer[trailer_size];
			//  0-3  CRC32 of the uncompressed data
			//  4-11 size of the uncompressed data
			// 12-19 member size including header and trailer

class Range_decoder
  {
  unsigned long long member_pos;
  uint32_t code;
  uint32_t range;

public:
  Range_decoder()
    : member_pos( header_size ), code( 0 ), range( 0xFFFFFFFFU )
    {
    get_byte();			// discard first byte of the LZMA stream
    for( int i = 0; i < 4; ++i ) code = ( code << 8 ) | get_byte();
    }

  uint8_t get_byte() { ++member_pos; return std::getc( stdin ); }
  unsigned long long member_position() const { return member_pos; }

  unsigned decode( const int num_bits )
    {
    unsigned symbol = 0;
    for( int i = num_bits; i > 0; --i )
      {
      range >>= 1;
      symbol <<= 1;
      if( code >= range ) { code -= range; symbol |= 1; }
      if( range <= 0x00FFFFFFU )			// normalize
        { range <<= 8; code = ( code << 8 ) | get_byte(); }
      }
    return symbol;
    }

  bool decode_bit( Bit_model & bm )
    {
    bool symbol;
    const uint32_t bound = ( range >> bit_model_total_bits ) * bm.probability;
    if( code < bound )
      {
      range = bound;
      bm.probability +=
        ( bit_model_total - bm.probability ) >> bit_model_move_bits;
      symbol = 0;
      }
    else
      {
      code -= bound;
      range -= bound;
      bm.probability -= bm.probability >> bit_model_move_bits;
      symbol = 1;
      }
    if( range <= 0x00FFFFFFU )				// normalize
      { range <<= 8; code = ( code << 8 ) | get_byte(); }
    return symbol;
    }

  unsigned decode_tree( Bit_model bm[], const int num_bits )
    {
    unsigned symbol = 1;
    for( int i = 0; i < num_bits; ++i )
      symbol = ( symbol << 1 ) | decode_bit( bm[symbol] );
    return symbol - ( 1 << num_bits );
    }

  unsigned decode_tree_reversed( Bit_model bm[], const int num_bits )
    {
    unsigned symbol = decode_tree( bm, num_bits );
    unsigned reversed_symbol = 0;
    for( int i = 0; i < num_bits; ++i )
      {
      reversed_symbol = ( reversed_symbol << 1 ) | ( symbol & 1 );
      symbol >>= 1;
      }
    return reversed_symbol;
    }

  unsigned decode_matched( Bit_model bm[], const unsigned match_byte )
    {
    unsigned symbol = 1;
    for( int i = 7; i >= 0; --i )
      {
      const bool match_bit = ( match_byte >> i ) & 1;
      const bool bit = decode_bit( bm[symbol+(match_bit<<8)+0x100] );
      symbol = ( symbol << 1 ) | bit;
      if( match_bit != bit )
        {
        while( symbol < 0x100 )
          symbol = ( symbol << 1 ) | decode_bit( bm[symbol] );
        break;
        }
      }
    return symbol & 0xFF;
    }

  unsigned decode_len( Len_model & lm, const int pos_state )
    {
    if( decode_bit( lm.choice1 ) == 0 )
      return min_match_len +
             decode_tree( lm.bm_low[pos_state], len_low_bits );
    if( decode_bit( lm.choice2 ) == 0 )
      return min_match_len + len_low_symbols +
             decode_tree( lm.bm_mid[pos_state], len_mid_bits );
    return min_match_len + len_low_symbols + len_mid_symbols +
           decode_tree( lm.bm_high, len_high_bits );
    }
  };


class LZ_decoder
  {
  unsigned long long partial_data_pos;
  Range_decoder rdec;
  const unsigned dictionary_size;
  uint8_t * const buffer;	// output buffer
  unsigned pos;			// current pos in buffer
  unsigned stream_pos;		// first byte not yet written to stdout
  uint32_t crc_;
  bool pos_wrapped;

  void flush_data();

  uint8_t peek( const unsigned distance ) const
    {
    if( pos > distance ) return buffer[pos - distance - 1];
    if( pos_wrapped ) return buffer[dictionary_size + pos - distance - 1];
    return 0;			// prev_byte of first byte
    }

  void put_byte( const uint8_t b )
    {
    buffer[pos] = b;
    if( ++pos >= dictionary_size ) flush_data();
    }

public:
  explicit LZ_decoder( const unsigned dict_size )
    :
    partial_data_pos( 0 ),
    dictionary_size( dict_size ),
    buffer( new uint8_t[dictionary_size] ),
    pos( 0 ),
    stream_pos( 0 ),
    crc_( 0xFFFFFFFFU ),
    pos_wrapped( false )
    {}

  ~LZ_decoder() { delete[] buffer; }

  unsigned crc() const { return crc_ ^ 0xFFFFFFFFU; }
  unsigned long long data_position() const
    { return partial_data_pos + pos; }
  uint8_t get_byte() { return rdec.get_byte(); }
  unsigned long long member_position() const
    { return rdec.member_position(); }

  bool decode_member();
  };


void LZ_decoder::flush_data()
  {
  if( pos > stream_pos )
    {
    const unsigned size = pos - stream_pos;
    crc32.update_buf( crc_, buffer + stream_pos, size );
    if( std::fwrite( buffer + stream_pos, 1, size, stdout ) != size )
      { std::fprintf( stderr, "Write error: %s\n", std::strerror( errno ) );
        std::exit( 1 ); }
    if( pos >= dictionary_size )
      { partial_data_pos += pos; pos = 0; pos_wrapped = true; }
    stream_pos = pos;
    }
  }


bool LZ_decoder::decode_member()	// Return false if error
  {
  Bit_model bm_literal[1<<literal_context_bits][0x300];
  Bit_model bm_match[State::states][pos_states];
  Bit_model bm_rep[State::states];
  Bit_model bm_rep0[State::states];
  Bit_model bm_rep1[State::states];
  Bit_model bm_rep2[State::states];
  Bit_model bm_len[State::states][pos_states];
  Bit_model bm_dis_slot[len_states][1<<dis_slot_bits];
  Bit_model bm_dis[modeled_distances-end_dis_model+1];
  Bit_model bm_align[dis_align_size];
  Len_model match_len_model;
  Len_model rep_len_model;
  unsigned rep0 = 0;		// rep[0-3] latest four distances
  unsigned rep1 = 0;		// used for efficient coding of
  unsigned rep2 = 0;		// repeated distances
  unsigned rep3 = 0;
  State state;

  while( !std::feof( stdin ) && !std::ferror( stdin ) )
    {
    const int pos_state = data_position() & pos_state_mask;
    if( rdec.decode_bit( bm_match[state()][pos_state] ) == 0 )	// 1st bit
      {
      // literal byte
      const uint8_t prev_byte = peek( 0 );
      const int literal_state = prev_byte >> ( 8 - literal_context_bits );
      Bit_model * const bm = bm_literal[literal_state];
      if( state.is_char() )
        put_byte( rdec.decode_tree( bm, 8 ) );
      else
        put_byte( rdec.decode_matched( bm, peek( rep0 ) ) );
      state.set_char();
      continue;
      }
    // match or repeated match
    int len;
    if( rdec.decode_bit( bm_rep[state()] ) != 0 )		// 2nd bit
      {
      if( rdec.decode_bit( bm_rep0[state()] ) == 0 )		// 3rd bit
        {
        if( rdec.decode_bit( bm_len[state()][pos_state] ) == 0 ) // 4th bit
          { state.set_short_rep(); put_byte( peek( rep0 ) ); continue; }
        }
      else
        {
        unsigned distance;
        if( rdec.decode_bit( bm_rep1[state()] ) == 0 )		// 4th bit
          distance = rep1;
        else
          {
          if( rdec.decode_bit( bm_rep2[state()] ) == 0 )	// 5th bit
            distance = rep2;
          else
            { distance = rep3; rep3 = rep2; }
          rep2 = rep1;
          }
        rep1 = rep0;
        rep0 = distance;
        }
      state.set_rep();
      len = rdec.decode_len( rep_len_model, pos_state );
      }
    else					// match
      {
      rep3 = rep2; rep2 = rep1; rep1 = rep0;
      len = rdec.decode_len( match_len_model, pos_state );
      const int len_state = std::min( len - min_match_len, len_states - 1 );
      rep0 = rdec.decode_tree( bm_dis_slot[len_state], dis_slot_bits );
      if( rep0 >= start_dis_model )
        {
        const unsigned dis_slot = rep0;
        const int direct_bits = ( dis_slot >> 1 ) - 1;
        rep0 = ( 2 | ( dis_slot & 1 ) ) << direct_bits;
        if( dis_slot < end_dis_model )
          rep0 += rdec.decode_tree_reversed( bm_dis + ( rep0 - dis_slot ),
                                             direct_bits );
        else
          {
          rep0 +=
            rdec.decode( direct_bits - dis_align_bits ) << dis_align_bits;
          rep0 += rdec.decode_tree_reversed( bm_align, dis_align_bits );
          if( rep0 == 0xFFFFFFFFU )		// marker found
            {
            flush_data();
            return len == min_match_len;	// End Of Stream marker
            }
          }
        }
      state.set_match();
      if( rep0 >= dictionary_size || ( rep0 >= pos && !pos_wrapped ) )
        { flush_data(); return false; }
      }
    for( int i = 0; i < len; ++i ) put_byte( peek( rep0 ) );
    }
  flush_data();
  return false;
  }


int main( const int argc, const char * const argv[] )
  {
  if( argc > 2 || ( argc == 2 && std::strcmp( argv[1], "-d" ) != 0 ) )
    {
    std::printf(
      "Lzd %s - Educational decompressor for the lzip format.\n"
      "Study the source code to learn how a lzip decompressor works.\n"
      "See the lzip manual for an explanation of the code.\n"
      "\nUsage: %s [-d] < file.lz > file\n"
      "Lzd decompresses from standard input to standard output.\n"
      "\nCopyright (C) 2024 Antonio Diaz Diaz.\n"
      "License 2-clause BSD.\n"
      "This is free software: you are free to change and redistribute it.\n"
      "There is NO WARRANTY, to the extent permitted by law.\n"
      "Report bugs to lzip-bug@nongnu.org\n"
      "Lzd home page: http://www.nongnu.org/lzip/lzd.html\n",
      PROGVERSION, argv[0] );
    return 0;
    }

#if defined __MSVCRT__ || defined __OS2__ || defined __DJGPP__
  setmode( STDIN_FILENO, O_BINARY );
  setmode( STDOUT_FILENO, O_BINARY );
#endif

  for( bool first_member = true; ; first_member = false )
    {
    Lzip_header header;				// check header
    for( int i = 0; i < header_size; ++i ) header[i] = std::getc( stdin );
    if( std::feof( stdin ) || std::memcmp( header, "LZIP\x01", 5 ) != 0 )
      {
      if( first_member )
        { std::fputs( "Bad magic number (file not in lzip format).\n",
                      stderr ); return 2; }
      break;					// ignore trailing data
      }
    unsigned dict_size = 1 << ( header[5] & 0x1F );
    dict_size -= ( dict_size / 16 ) * ( ( header[5] >> 5 ) & 7 );
    if( dict_size < min_dictionary_size || dict_size > max_dictionary_size )
      { std::fputs( "Invalid dictionary size in member header.\n", stderr );
        return 2; }

    LZ_decoder decoder( dict_size );		// decode LZMA stream
    if( !decoder.decode_member() )
      { std::fputs( "Data error\n", stderr ); return 2; }

    Lzip_trailer trailer;			// check trailer
    for( int i = 0; i < trailer_size; ++i ) trailer[i] = decoder.get_byte();
    int retval = 0;
    unsigned crc = 0;
    for( int i = 3; i >= 0; --i ) crc = ( crc << 8 ) + trailer[i];
    if( crc != decoder.crc() )
      { std::fputs( "CRC mismatch\n", stderr ); retval = 2; }

    unsigned long long data_size = 0;
    for( int i = 11; i >= 4; --i )
      data_size = ( data_size << 8 ) + trailer[i];
    if( data_size != decoder.data_position() )
      { std::fputs( "Data size mismatch\n", stderr ); retval = 2; }

    unsigned long long member_size = 0;
    for( int i = 19; i >= 12; --i )
      member_size = ( member_size << 8 ) + trailer[i];
    if( member_size != decoder.member_position() )
      { std::fputs( "Member size mismatch\n", stderr ); retval = 2; }
    if( retval ) return retval;
    }

  if( std::fclose( stdout ) != 0 )
    { std::fprintf( stderr, "Error closing stdout: %s\n",
                    std::strerror( errno ) ); return 1; }
  return 0;
  }


File: clzip.info,  Node: Concept index,  Prev: Reference source code,  Up: Top

Concept index
*************

[index]
* Menu:

* algorithm:                             Algorithm.                 (line 6)
* bugs:                                  Problems.                  (line 6)
* examples:                              Examples.                  (line 6)
* file format:                           File format.               (line 6)
* format of the LZMA stream:             Stream format.             (line 6)
* getting help:                          Problems.                  (line 6)
* introduction:                          Introduction.              (line 6)
* invoking:                              Invoking clzip.            (line 6)
* options:                               Invoking clzip.            (line 6)
* output:                                Output.                    (line 6)
* quality assurance:                     Quality assurance.         (line 6)
* reference source code:                 Reference source code.     (line 6)
* trailing data:                         Trailing data.             (line 6)
* usage:                                 Invoking clzip.            (line 6)
* version:                               Invoking clzip.            (line 6)



Tag Table:
Node: Top205
Node: Introduction1207
Node: Output7331
Node: Invoking clzip8934
Ref: --trailing-error9812
Node: Quality assurance19918
Node: Algorithm28733
Node: File format32141
Ref: coded-dict-size33571
Node: Stream format34802
Ref: what-is-coded37198
Node: Trailing data46072
Node: Examples48410
Ref: concat-example49860
Node: Problems51090
Node: Reference source code51626
Node: Concept index66672

End Tag Table


Local Variables:
coding: iso-8859-15
End: