diff options
Diffstat (limited to 'src/nvme/ioctl.h')
| -rw-r--r-- | src/nvme/ioctl.h | 4407 |
1 files changed, 4407 insertions, 0 deletions
diff --git a/src/nvme/ioctl.h b/src/nvme/ioctl.h new file mode 100644 index 0000000..ab3797d --- /dev/null +++ b/src/nvme/ioctl.h @@ -0,0 +1,4407 @@ +// SPDX-License-Identifier: LGPL-2.1-or-later +/* + * This file is part of libnvme. + * Copyright (c) 2020 Western Digital Corporation or its affiliates. + * + * Authors: Keith Busch <keith.busch@wdc.com> + * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> + */ + +#ifndef _LIBNVME_IOCTL_H +#define _LIBNVME_IOCTL_H + +#include <stddef.h> +#include <sys/ioctl.h> +#include "types.h" + +/* + * We can not always count on the kernel UAPI being installed. Use the same + * 'ifdef' guard to avoid double definitions just in case. + */ +#ifndef _UAPI_LINUX_NVME_IOCTL_H +#define _UAPI_LINUX_NVME_IOCTL_H + +#ifndef _LINUX_NVME_IOCTL_H +#define _LINUX_NVME_IOCTL_H + +/** + * DOC: ioctl.h + * + * Linux NVMe ioctl interface functions + */ + +/* '0' is interpreted by the kernel to mean 'apply the default timeout' */ +#define NVME_DEFAULT_IOCTL_TIMEOUT 0 + +/** + * struct nvme_passthru_cmd - nvme passthrough command structure + * @opcode: Operation code, see &enum nvme_io_opcodes and &enum nvme_admin_opcodes + * @flags: Not supported: intended for command flags (eg: SGL, FUSE) + * @rsvd1: Reserved for future use + * @nsid: Namespace Identifier, or Fabrics type + * @cdw2: Command Dword 2 (no spec defined use) + * @cdw3: Command Dword 3 (no spec defined use) + * @metadata: User space address to metadata buffer (NULL if not used) + * @addr: User space address to data buffer (NULL if not used) + * @metadata_len: Metadata buffer transfer length + * @data_len: Data buffer transfer length + * @cdw10: Command Dword 10 (command specific) + * @cdw11: Command Dword 11 (command specific) + * @cdw12: Command Dword 12 (command specific) + * @cdw13: Command Dword 13 (command specific) + * @cdw14: Command Dword 14 (command specific) + * @cdw15: Command Dword 15 (command specific) + * @timeout_ms: If non-zero, overrides system default timeout in milliseconds + * @result: Set on completion to the command's CQE DWORD 0 controller response + */ +struct nvme_passthru_cmd { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 result; +}; + +/** + * struct nvme_passthru_cmd64 - 64-bit nvme passthrough command structure + * @opcode: Operation code, see &enum nvme_io_opcodes and &enum nvme_admin_opcodes + * @flags: Not supported: intended for command flags (eg: SGL, FUSE) + * @rsvd1: Reserved for future use + * @nsid: Namespace Identifier, or Fabrics type + * @cdw2: Command Dword 2 (no spec defined use) + * @cdw3: Command Dword 3 (no spec defined use) + * @metadata: User space address to metadata buffer (NULL if not used) + * @addr: User space address to data buffer (NULL if not used) + * @metadata_len: Metadata buffer transfer length + * @data_len: Data buffer transfer length + * @cdw10: Command Dword 10 (command specific) + * @cdw11: Command Dword 11 (command specific) + * @cdw12: Command Dword 12 (command specific) + * @cdw13: Command Dword 13 (command specific) + * @cdw14: Command Dword 14 (command specific) + * @cdw15: Command Dword 15 (command specific) + * @timeout_ms: If non-zero, overrides system default timeout in milliseconds + * @rsvd2: Reserved for future use (and fills an impicit struct pad + * @result: Set on completion to the command's CQE DWORD 0-1 controller response + */ +struct nvme_passthru_cmd64 { + __u8 opcode; + __u8 flags; + __u16 rsvd1; + __u32 nsid; + __u32 cdw2; + __u32 cdw3; + __u64 metadata; + __u64 addr; + __u32 metadata_len; + __u32 data_len; + __u32 cdw10; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw14; + __u32 cdw15; + __u32 timeout_ms; + __u32 rsvd2; + __u64 result; +}; + +#define NVME_IOCTL_ID _IO('N', 0x40) +#define NVME_IOCTL_RESET _IO('N', 0x44) +#define NVME_IOCTL_SUBSYS_RESET _IO('N', 0x45) +#define NVME_IOCTL_RESCAN _IO('N', 0x46) +#define NVME_IOCTL_ADMIN_CMD _IOWR('N', 0x41, struct nvme_passthru_cmd) +#define NVME_IOCTL_IO_CMD _IOWR('N', 0x43, struct nvme_passthru_cmd) +#define NVME_IOCTL_ADMIN64_CMD _IOWR('N', 0x47, struct nvme_passthru_cmd64) +#define NVME_IOCTL_IO64_CMD _IOWR('N', 0x48, struct nvme_passthru_cmd64) + +#endif /* _UAPI_LINUX_NVME_IOCTL_H */ + +#endif /* _LINUX_NVME_IOCTL_H */ + +/** + * nvme_submit_admin_passthru64() - Submit a 64-bit nvme passthrough admin + * command + * @fd: File descriptor of nvme device + * @cmd: The nvme admin command to send + * @result: Optional field to return the result from the CQE DW0-1 + * + * Uses NVME_IOCTL_ADMIN64_CMD for the ioctl request. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_submit_admin_passthru64(int fd, struct nvme_passthru_cmd64 *cmd, + __u64 *result); + +/** + * nvme_admin_passthru64() - Submit a 64-bit nvme passthrough command + * @fd: File descriptor of nvme device + * @opcode: The nvme io command to send + * @flags: NVMe command flags (not used) + * @rsvd: Reserevd for future use + * @nsid: Namespace identifier + * @cdw2: Command dword 2 + * @cdw3: Command dword 3 + * @cdw10: Command dword 10 + * @cdw11: Command dword 11 + * @cdw12: Command dword 12 + * @cdw13: Command dword 13 + * @cdw14: Command dword 14 + * @cdw15: Command dword 15 + * @data_len: Length of the data transfered in this command in bytes + * @data: Pointer to user address of the data buffer + * @metadata_len:Length of metadata transfered in this command + * @metadata: Pointer to user address of the metadata buffer + * @timeout_ms: How long the kernel waits for the command to complete + * @result: Optional field to return the result from the CQE dword 0 + * + * Parameterized form of nvme_submit_admin_passthru64(). This sets up and + * submits a &struct nvme_passthru_cmd64. + * + * Known values for @opcode are defined in &enum nvme_admin_opcode. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_admin_passthru64(int fd, __u8 opcode, __u8 flags, __u16 rsvd, + __u32 nsid, __u32 cdw2, __u32 cdw3, __u32 cdw10, __u32 cdw11, + __u32 cdw12, __u32 cdw13, __u32 cdw14, __u32 cdw15, + __u32 data_len, void *data, __u32 metadata_len, void *metadata, + __u32 timeout_ms, __u64 *result); + +/** + * nvme_submit_admin_passthru() - Submit an nvme passthrough admin command + * @fd: File descriptor of nvme device + * @cmd: The nvme admin command to send + * @result: Optional field to return the result from the CQE DW0 + * + * Uses NVME_IOCTL_ADMIN_CMD for the ioctl request. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_submit_admin_passthru(int fd, struct nvme_passthru_cmd *cmd, + __u32 *result); + +/** + * nvme_admin_passthru() - Submit an nvme passthrough command + * @fd: File descriptor of nvme device + * @opcode: The nvme io command to send + * @flags: NVMe command flags (not used) + * @rsvd: Reserevd for future use + * @nsid: Namespace identifier + * @cdw2: Command dword 2 + * @cdw3: Command dword 3 + * @cdw10: Command dword 10 + * @cdw11: Command dword 11 + * @cdw12: Command dword 12 + * @cdw13: Command dword 13 + * @cdw14: Command dword 14 + * @cdw15: Command dword 15 + * @data_len: Length of the data transfered in this command in bytes + * @data: Pointer to user address of the data buffer + * @metadata_len:Length of metadata transfered in this command + * @metadata: Pointer to user address of the metadata buffer + * @timeout_ms: How long the kernel waits for the command to complete + * @result: Optional field to return the result from the CQE dword 0 + * + * Parameterized form of nvme_submit_admin_passthru(). This sets up and + * submits a &struct nvme_passthru_cmd. + * + * Known values for @opcode are defined in &enum nvme_admin_opcode. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_admin_passthru(int fd, __u8 opcode, __u8 flags, __u16 rsvd, + __u32 nsid, __u32 cdw2, __u32 cdw3, __u32 cdw10, __u32 cdw11, + __u32 cdw12, __u32 cdw13, __u32 cdw14, __u32 cdw15, + __u32 data_len, void *data, __u32 metadata_len, void *metadata, + __u32 timeout_ms, __u32 *result); + +/** + * nvme_submit_io_passthru64() - Submit a 64-bit nvme passthrough command + * @fd: File descriptor of nvme device + * @cmd: The nvme io command to send + * @result: Optional field to return the result from the CQE DW0-1 + * + * Uses NVME_IOCTL_IO64_CMD for the ioctl request. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_submit_io_passthru64(int fd, struct nvme_passthru_cmd64 *cmd, + __u64 *result); + +/** + * nvme_io_passthru64() - Submit an nvme io passthrough command + * @fd: File descriptor of nvme device + * @opcode: The nvme io command to send + * @flags: NVMe command flags (not used) + * @rsvd: Reserevd for future use + * @nsid: Namespace identifier + * @cdw2: Command dword 2 + * @cdw3: Command dword 3 + * @cdw10: Command dword 10 + * @cdw11: Command dword 11 + * @cdw12: Command dword 12 + * @cdw13: Command dword 13 + * @cdw14: Command dword 14 + * @cdw15: Command dword 15 + * @data_len: Length of the data transfered in this command in bytes + * @data: Pointer to user address of the data buffer + * @metadata_len:Length of metadata transfered in this command + * @metadata: Pointer to user address of the metadata buffer + * @timeout_ms: How long the kernel waits for the command to complete + * @result: Optional field to return the result from the CQE dword 0 + * + * Parameterized form of nvme_submit_io_passthru64(). This sets up and submits + * a &struct nvme_passthru_cmd64. + * + * Known values for @opcode are defined in &enum nvme_io_opcode. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_io_passthru64(int fd, __u8 opcode, __u8 flags, __u16 rsvd, + __u32 nsid, __u32 cdw2, __u32 cdw3, __u32 cdw10, __u32 cdw11, + __u32 cdw12, __u32 cdw13, __u32 cdw14, __u32 cdw15, + __u32 data_len, void *data, __u32 metadata_len, void *metadata, + __u32 timeout_ms, __u64 *result); + +/** + * nvme_submit_io_passthru() - Submit an nvme passthrough command + * @fd: File descriptor of nvme device + * @cmd: The nvme io command to send + * @result: Optional field to return the result from the CQE dword 0 + * @result: Optional field to return the result from the CQE DW0 + * + * Uses NVME_IOCTL_IO_CMD for the ioctl request. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_submit_io_passthru(int fd, struct nvme_passthru_cmd *cmd, + __u32 *result); + +/** + * nvme_io_passthru() - Submit an nvme io passthrough command + * @fd: File descriptor of nvme device + * @opcode: The nvme io command to send + * @flags: NVMe command flags (not used) + * @rsvd: Reserevd for future use + * @nsid: Namespace identifier + * @cdw2: Command dword 2 + * @cdw3: Command dword 3 + * @cdw10: Command dword 10 + * @cdw11: Command dword 11 + * @cdw12: Command dword 12 + * @cdw13: Command dword 13 + * @cdw14: Command dword 14 + * @cdw15: Command dword 15 + * @data_len: Length of the data transfered in this command in bytes + * @data: Pointer to user address of the data buffer + * @metadata_len:Length of metadata transfered in this command + * @metadata: Pointer to user address of the metadata buffer + * @timeout_ms: How long the kernel waits for the command to complete + * @result: Optional field to return the result from the CQE dword 0 + * + * Parameterized form of nvme_submit_io_passthru(). This sets up and submits + * a &struct nvme_passthru_cmd. + * + * Known values for @opcode are defined in &enum nvme_io_opcode. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_io_passthru(int fd, __u8 opcode, __u8 flags, __u16 rsvd, + __u32 nsid, __u32 cdw2, __u32 cdw3, __u32 cdw10, __u32 cdw11, + __u32 cdw12, __u32 cdw13, __u32 cdw14, __u32 cdw15, + __u32 data_len, void *data, __u32 metadata_len, void *metadata, + __u32 timeout_ms, __u32 *result); + +/** + * nvme_subsystem_reset() - Initiate a subsystem reset + * @fd: File descriptor of nvme device + * + * This should only be sent to controller handles, not to namespaces. + * + * Return: Zero if a subsystem reset was initiated or -1 with errno set + * otherwise. + */ +int nvme_subsystem_reset(int fd); + +/** + * nvme_ctrl_reset() - Initiate a controller reset + * @fd: File descriptor of nvme device + * + * This should only be sent to controller handles, not to namespaces. + * + * Return: 0 if a reset was initiated or -1 with errno set otherwise. + */ +int nvme_ctrl_reset(int fd); + +/** + * nvme_ns_rescan() - Initiate a controller rescan + * @fd: File descriptor of nvme device + * + * This should only be sent to controller handles, not to namespaces. + * + * Return: 0 if a rescan was initiated or -1 with errno set otherwise. + */ +int nvme_ns_rescan(int fd); + +/** + * nvme_get_nsid() - Retrieve the NSID from a namespace file descriptor + * @fd: File descriptor of nvme namespace + * @nsid: User pointer to namespace id + * + * This should only be sent to namespace handles, not to controllers. The + * kernel's interface returns the nsid as the return value. This is unfortunate + * for many architectures that are incapable of allowing distinguishing a + * namespace id > 0x80000000 from a negative error number. + * + * Return: 0 if @nsid was set successfully or -1 with errno set otherwise. + */ +int nvme_get_nsid(int fd, __u32 *nsid); + +/** + * struct nvme_identify_args - Arguments for the NVMe Identify command + * @result: The command completion result from CQE dword0 + * @data: User space destination address to transfer the data + * @args_size: Size of &struct nvme_identify_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms (0 for default timeout) + * @cns: The Controller or Namespace structure, see @enum nvme_identify_cns + * @csi: Command Set Identifier + * @nsid: Namespace identifier, if applicable + * @cntid: The Controller Identifier, if applicable + * @cns_specific_id: Identifier that is required for a particular CNS value + * @uuidx: UUID Index if controller supports this id selection method + */ +struct nvme_identify_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + enum nvme_identify_cns cns; + enum nvme_csi csi; + __u32 nsid; + __u16 cntid; + __u16 cns_specific_id; + __u8 uuidx; +}; + +/** + * nvme_identify() - Send the NVMe Identify command + * @args: &struct nvme_identify_args argument structure + * + * The Identify command returns a data buffer that describes information about + * the NVM subsystem, the controller or the namespace(s). + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_identify(struct nvme_identify_args *args); + +static int nvme_identify_cns_nsid(int fd, enum nvme_identify_cns cns, + __u32 nsid, void *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = cns, + .csi = NVME_CSI_NVM, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_ctrl() - Retrieves nvme identify controller + * @fd: File descriptor of nvme device + * @id: User space destination address to transfer the data, + * + * Sends nvme identify with CNS value %NVME_IDENTIFY_CNS_CTRL. + * + * See &struct nvme_id_ctrl for details on the data returned. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ctrl(int fd, struct nvme_id_ctrl *id) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_CTRL, + NVME_NSID_NONE, id); +} + +/** + * nvme_identify_ns() - Retrieves nvme identify namespace + * @fd: File descriptor of nvme device + * @nsid: Namespace to identify + * @ns: User space destination address to transfer the data + * + * If the Namespace Identifier (NSID) field specifies an active NSID, then the + * Identify Namespace data structure is returned to the host for that specified + * namespace. + * + * If the controller supports the Namespace Management capability and the NSID + * field is set to %NVME_NSID_ALL, then the controller returns an Identify Namespace + * data structure that specifies capabilities that are common across namespaces + * for this controller. + * + * See &struct nvme_id_ns for details on the structure returned. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ns(int fd, __u32 nsid, struct nvme_id_ns *ns) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_NS, nsid, ns); +} + +/** + * nvme_identify_allocated_ns() - Same as nvme_identify_ns, but only for + * allocated namespaces + * @fd: File descriptor of nvme device + * @nsid: Namespace to identify + * @ns: User space destination address to transfer the data + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_allocated_ns(int fd, __u32 nsid, + struct nvme_id_ns *ns) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_ALLOCATED_NS, + nsid, ns); +} + +/** + * nvme_identify_active_ns_list() - Retrieves active namespaces id list + * @fd: File descriptor of nvme device + * @nsid: Return namespaces greater than this identifer + * @list: User space destination address to transfer the data + * + * A list of 1024 namespace IDs is returned to the host containing NSIDs in + * increasing order that are greater than the value specified in the Namespace + * Identifier (nsid) field of the command. + * + * See &struct nvme_ns_list for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_active_ns_list(int fd, __u32 nsid, + struct nvme_ns_list *list) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_NS_ACTIVE_LIST, + nsid, list); +} + +/** + * nvme_identify_allocated_ns_list() - Retrieves allocated namespace id list + * @fd: File descriptor of nvme device + * @nsid: Return namespaces greater than this identifer + * @list: User space destination address to transfer the data + * + * A list of 1024 namespace IDs is returned to the host containing NSIDs in + * increasing order that are greater than the value specified in the Namespace + * Identifier (nsid) field of the command. + * + * See &struct nvme_ns_list for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_allocated_ns_list(int fd, __u32 nsid, + struct nvme_ns_list *list) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_ALLOCATED_NS_LIST, + nsid, list); +} + +/** + * nvme_identify_ctrl_list() - Retrieves identify controller list + * @fd: File descriptor of nvme device + * @cntid: Starting CNTLID to return in the list + * @cntlist: User space destination address to transfer the data + * + * Up to 2047 controller identifiers is returned containing a controller + * identifier greater than or equal to the controller identifier specified in + * @cntid. + * + * See &struct nvme_ctrl_list for a definition of the structure returned. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ctrl_list(int fd, __u16 cntid, + struct nvme_ctrl_list *cntlist) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = cntlist, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CTRL_LIST, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = cntid, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_nsid_ctrl_list() - Retrieves controller list attached to an nsid + * @fd: File descriptor of nvme device + * @nsid: Return controllers that are attached to this nsid + * @cntid: Starting CNTLID to return in the list + * @cntlist: User space destination address to transfer the data + * + * Up to 2047 controller identifiers are returned containing a controller + * identifier greater than or equal to the controller identifier specified in + * @cntid attached to @nsid. + * + * See &struct nvme_ctrl_list for a definition of the structure returned. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 + */ +static inline int nvme_identify_nsid_ctrl_list(int fd, __u32 nsid, __u16 cntid, + struct nvme_ctrl_list *cntlist) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = cntlist, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_NS_CTRL_LIST, + .csi = NVME_CSI_NVM, + .nsid = nsid, + .cntid = cntid, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_ns_descs() - Retrieves namespace descriptor list + * @fd: File descriptor of nvme device + * @nsid: The namespace id to retrieve destriptors + * @descs: User space destination address to transfer the data + * + * A list of Namespace Identification Descriptor structures is returned to the + * host for the namespace specified in the Namespace Identifier (NSID) field if + * it is an active NSID. + * + * The data returned is in the form of an arrray of 'struct nvme_ns_id_desc'. + * + * See &struct nvme_ns_id_desc for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ns_descs(int fd, __u32 nsid, + struct nvme_ns_id_desc *descs) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_NS_DESC_LIST, + nsid, descs); +} + +/** + * nvme_identify_nvmset_list() - Retrieves NVM Set List + * @fd: File descriptor of nvme device + * @nvmsetid: NVM Set Identifier + * @nvmset: User space destination address to transfer the data + * + * Retrieves an NVM Set List, &struct nvme_id_nvmset_list. The data structure + * is an ordered list by NVM Set Identifier, starting with the first NVM Set + * Identifier supported by the NVM subsystem that is equal to or greater than + * the NVM Set Identifier. + * + * See &struct nvme_id_nvmset_list for the defintion of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_nvmset_list(int fd, __u16 nvmsetid, + struct nvme_id_nvmset_list *nvmset) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = nvmset, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_NVMSET_LIST, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = nvmsetid, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_primary_ctrl() - Retrieve NVMe Primary Controller + * identification + * @fd: File descriptor of nvme device + * @cntid: Return controllers starting at this identifier + * @cap: User space destination buffer address to transfer the data + * + * See &struct nvme_primary_ctrl_cap for the defintion of the returned structure, @cap. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_primary_ctrl(int fd, __u16 cntid, + struct nvme_primary_ctrl_cap *cap) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = cap, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_PRIMARY_CTRL_CAP, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = cntid, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_secondary_ctrl_list() - Retrieves secondary controller list + * @fd: File descriptor of nvme device + * @nsid: Namespace identifier + * @cntid: Return controllers starting at this identifier + * @sc_list: User space destination address to transfer the data + * + * A Secondary Controller List is returned to the host for up to 127 secondary + * controllers associated with the primary controller processing this command. + * The list contains entries for controller identifiers greater than or equal + * to the value specified in the Controller Identifier (cntid). + * + * See &struct nvme_secondary_ctrls_list for a defintion of the returned + * structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_secondary_ctrl_list(int fd, __u32 nsid, + __u16 cntid, struct nvme_secondary_ctrl_list *sc_list) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = sc_list, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_SECONDARY_CTRL_LIST, + .csi = NVME_CSI_NVM, + .nsid = nsid, + .cntid = cntid, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_ns_granularity() - Retrieves namespace granularity + * identification + * @fd: File descriptor of nvme device + * @gr_list: User space destination address to transfer the data + * + * If the controller supports reporting of Namespace Granularity, then a + * Namespace Granularity List is returned to the host for up to sixteen + * namespace granularity descriptors + * + * See &struct nvme_id_ns_granularity_list for the definition of the returned + * structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ns_granularity(int fd, + struct nvme_id_ns_granularity_list *gr_list) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_NS_GRANULARITY, + NVME_NSID_NONE, gr_list); +} + +/** + * nvme_identify_uuid() - Retrieves device's UUIDs + * @fd: File descriptor of nvme device + * @uuid_list: User space destination address to transfer the data + * + * Each UUID List entry is either 0h, the NVMe Invalid UUID, or a valid UUID. + * Valid UUIDs are those which are non-zero and are not the NVMe Invalid UUID. + * + * See &struct nvme_id_uuid_list for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_uuid(int fd, struct nvme_id_uuid_list *uuid_list) +{ + return nvme_identify_cns_nsid(fd, NVME_IDENTIFY_CNS_UUID_LIST, + NVME_NSID_NONE, uuid_list); +} + +/** + * nvme_identify_ns_csi() - I/O command set specific identify namespace data + * @fd: File descriptor of nvme device + * @nsid: Namespace to identify + * @uuidx: UUID Index for differentiating vendor specific encoding + * @csi: Command Set Identifier + * @data: User space destination address to transfer the data + * + * An I/O Command Set specific Identify Namespace data structre is returned + * for the namespace specified in @nsid. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ns_csi(int fd, __u32 nsid, __u8 uuidx, + enum nvme_csi csi, void *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_NS, + .csi = csi, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = uuidx, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_ctrl_csi() - I/O command set specific Identify Controller data + * @fd: File descriptor of nvme device + * @csi: Command Set Identifier + * @data: User space destination address to transfer the data + * + * An I/O Command Set specific Identify Controller data structure is returned + * to the host for the controller processing the command. The specific Identify + * Controller data structure to be returned is specified by @csi. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ctrl_csi(int fd, enum nvme_csi csi, void *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_CTRL, + .csi = csi, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_active_ns_list_csi() - Active namespace ID list associated with a specified I/O command set + * @fd: File descriptor of nvme device + * @nsid: Return namespaces greater than this identifier + * @csi: Command Set Identifier + * @ns_list: User space destination address to transfer the data + * + * A list of 1024 namespace IDs is returned to the host containing active + * NSIDs in increasing order that are greater than the value specified in + * the Namespace Identifier (nsid) field of the command and matching the + * I/O Command Set specified in the @csi argument. + * + * See &struct nvme_ns_list for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_active_ns_list_csi(int fd, __u32 nsid, + enum nvme_csi csi, struct nvme_ns_list *ns_list) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = ns_list, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_NS_ACTIVE_LIST, + .csi = csi, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_allocated_ns_list_csi() - Allocated namespace ID list associated with a specified I/O command set + * @fd: File descriptor of nvme device + * @nsid: Return namespaces greater than this identifier + * @csi: Command Set Identifier + * @ns_list: User space destination address to transfer the data + * + * A list of 1024 namespace IDs is returned to the host containing allocated + * NSIDs in increasing order that are greater than the value specified in + * the @nsid field of the command and matching the I/O Command Set + * specified in the @csi argument. + * + * See &struct nvme_ns_list for the definition of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_allocated_ns_list_csi(int fd, __u32 nsid, + enum nvme_csi csi, struct nvme_ns_list *ns_list) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = ns_list, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_ALLOCATED_NS_LIST, + .csi = csi, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_independent_identify_ns() - I/O command set independent Identify namespace data + * @fd: File descriptor of nvme device + * @nsid: Return namespaces greater than this identifier + * @ns: I/O Command Set Independent Identify Namespace data + * structure + * + * The I/O command set independent Identify namespace data structure for + * the namespace identified with @ns is returned to the host. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_independent_identify_ns(int fd, __u32 nsid, + struct nvme_id_independent_id_ns *ns) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = ns, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_INDEPENDENT_ID_NS, + .csi = NVME_CSI_NVM, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_ns_csi_user_data_format() - + * @fd: File descriptor of nvme device + * @user_data_format: Return namespaces capability of identifier + * @uuidx: UUID selection, if supported + * @csi: Command Set Identifier + * + * Identify Namespace data structure for the specified User Data Format + * index containing the namespace capabilities for the NVM Command Set. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_ns_csi_user_data_format(int fd, + __u16 user_data_format, __u8 uuidx, + enum nvme_csi csi, void *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_NS_USER_DATA_FORMAT, + .csi = csi, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = user_data_format, + .uuidx = uuidx, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_iocs_ns_csi_user_data_format() - + * @fd: File descriptor of nvme device + * @user_data_format: Return namespaces capability of identifier + * @uuidx: UUID selection, if supported + * @csi: Command Set Identifier + * + * I/O Command Set specific Identify Namespace data structure for + * the specified User Data Format index containing the namespace + * capabilities for the I/O Command Set specified in the CSI field. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_iocs_ns_csi_user_data_format(int fd, + __u16 user_data_format, __u8 uuidx, + enum nvme_csi csi, void *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_NS_USER_DATA_FORMAT, + .csi = csi, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = user_data_format, + .uuidx = uuidx, + }; + + return nvme_identify(&args); +} + +/** + * nvme_nvm_identify_ctrl() - Identify controller data + * @fd: File descriptor of nvme device + * @id: User space destination address to transfer the data + * + * Return an identify controller data structure to the host of + * processing controller. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_nvm_identify_ctrl(int fd, struct nvme_id_ctrl_nvm *id) +{ + return nvme_identify_ctrl_csi(fd, NVME_CSI_NVM, id); +} + +/** + * nvme_identify_domain_list() - Domain list data + * @fd: File descriptor of nvme device + * @domid: Domain ID + * @list: User space destiantion address to transfer data + * + * A list of 31 domain IDs is returned to the host containing domain + * attributes in increasing order that are greater than the value + * specified in the @domid field. + * + * See &struct nvme_identify_domain_attr for the definition of the + * returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_domain_list(int fd, __u16 domid, + struct nvme_id_domain_list *list) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = list, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_DOMAIN_LIST, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = domid, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_endurance_group_list() - Endurance group list data + * @fd: File descriptor of nvme device + * @endgrp_id: Endurance group identifier + * @list: Array of endurance group identifiers + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_endurance_group_list(int fd, __u16 endgrp_id, + struct nvme_id_endurance_group_list *list) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = list, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_ENDURANCE_GROUP_ID, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = endgrp_id, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_identify_iocs() - I/O command set data structure + * @fd: File descriptor of nvme device + * @cntlid: Controller ID + * @iocs: User space destination address to transfer the data + * + * Retrieves list of the controller's supported io command set vectors. See + * &struct nvme_id_iocs. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_identify_iocs(int fd, __u16 cntlid, + struct nvme_id_iocs *iocs) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = iocs, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_COMMAND_SET_STRUCTURE, + .csi = NVME_CSI_NVM, + .nsid = NVME_NSID_NONE, + .cntid = cntlid, + .cns_specific_id = NVME_CNSSPECID_NONE, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_zns_identify_ns() - ZNS identify namespace data + * @fd: File descriptor of nvme device + * @nsid: Namespace to identify + * @data: User space destination address to transfer the data + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_zns_identify_ns(int fd, __u32 nsid, + struct nvme_zns_id_ns *data) +{ + struct nvme_identify_args args = { + .result = NULL, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .cns = NVME_IDENTIFY_CNS_CSI_NS, + .csi = NVME_CSI_ZNS, + .nsid = nsid, + .cntid = NVME_CNTLID_NONE, + .cns_specific_id = NVME_CNSSPECID_NONE, + }; + + return nvme_identify(&args); +} + +/** + * nvme_zns_identify_ctrl() - ZNS identify controller data + * @fd: File descriptor of nvme device + * @id: User space destination address to transfer the data + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_zns_identify_ctrl(int fd, struct nvme_zns_id_ctrl *id) +{ + return nvme_identify_ctrl_csi(fd, NVME_CSI_ZNS, id); +} + +/** + * struct nvme_get_log_args - Arguments for the NVMe Admin Get Log command + * @lpo: Log page offset for partial log transfers + * @result: The command completion result from CQE dword0 + * @log: User space destination address to transfer the data + * @args_size: Length of the structure + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @lid: Log page identifier, see &enum nvme_cmd_get_log_lid for known + * values + * @len: Length of provided user buffer to hold the log data in bytes + * @nsid: Namespace identifier, if applicable + * @csi: Command set identifier, see &enum nvme_csi for known values + * @lsi: Log Specific Identifier + * @lsp: Log specific field + * @uuidx: UUID selection, if supported + * @rae: Retain asynchronous events + * @ot: Offset Type; if set @lpo specifies the index into the list + * of data structures, otherwise @lpo specifies the byte offset + * into the log page. + */ +struct nvme_get_log_args { + __u64 lpo; + __u32 *result; + void *log; + int args_size; + int fd; + __u32 timeout; + enum nvme_cmd_get_log_lid lid; + __u32 len; + __u32 nsid; + enum nvme_csi csi; + __u16 lsi; + __u8 lsp; + __u8 uuidx; + bool rae; + bool ot; +}; + +/** + * nvme_get_log() - NVMe Admin Get Log command + * @args: &struct nvme_get_log_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_log(struct nvme_get_log_args *args); + +static inline int nvme_get_nsid_log(int fd, bool rae, + enum nvme_cmd_get_log_lid lid, + __u32 nsid, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = lid, + .len = len, + .nsid = nsid, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + + return nvme_get_log(&args); +} + +static inline int nvme_get_log_simple(int fd, enum nvme_cmd_get_log_lid lid, + __u32 len, void *log) +{ + return nvme_get_nsid_log(fd, false, lid, NVME_NSID_ALL, len, log); +} + +/** + * nvme_get_log_supported_log_pages() - Retrieve nmve supported log pages + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @log: Array of LID supported and Effects data structures + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_supported_log_pages(int fd, bool rae, + struct nvme_supported_log_pages *log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_SUPPORTED_LOG_PAGES, + NVME_NSID_ALL, sizeof(*log), log); +} + +/** + * nvme_get_log_error() - Retrieve nvme error log + * @fd: File descriptor of nvme device + * @nr_entries: Number of error log entries allocated + * @rae: Retain asynchronous events + * @err_log: Array of error logs of size 'entries' + * + * This log page describes extended error information for a command that + * completed with error, or may report an error that is not specific to a + * particular command. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_error(int fd, unsigned nr_entries, bool rae, + struct nvme_error_log_page *err_log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_ERROR, + NVME_NSID_ALL, sizeof(*err_log) * nr_entries, + err_log); +} + +/** + * nvme_get_log_smart() - Retrieve nvme smart log + * @fd: File descriptor of nvme device + * @nsid: Optional namespace identifier + * @rae: Retain asynchronous events + * @smart_log: User address to store the smart log + * + * This log page provides SMART and general health information. The information + * provided is over the life of the controller and is retained across power + * cycles. To request the controller log page, the namespace identifier + * specified is FFFFFFFFh. The controller may also support requesting the log + * page on a per namespace basis, as indicated by bit 0 of the LPA field in the + * Identify Controller data structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_smart(int fd, __u32 nsid, bool rae, + struct nvme_smart_log *smart_log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_SMART, + nsid, sizeof(*smart_log), smart_log); +} + +/** + * nvme_get_log_fw_slot() - Retrieves the controller firmware log + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @fw_log: User address to store the log page + * + * This log page describes the firmware revision stored in each firmware slot + * supported. The firmware revision is indicated as an ASCII string. The log + * page also indicates the active slot number. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_fw_slot(int fd, bool rae, + struct nvme_firmware_slot *fw_log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_FW_SLOT, + NVME_NSID_ALL, sizeof(*fw_log), fw_log); +} + +/** + * nvme_get_log_changed_ns_list() - Retrieve namespace changed list + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @ns_log: User address to store the log page + * + * This log page describes namespaces attached to this controller that have + * changed since the last time the namespace was identified, been added, or + * deleted. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_changed_ns_list(int fd, bool rae, + struct nvme_ns_list *ns_log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_CHANGED_NS, + NVME_NSID_ALL, sizeof(*ns_log), ns_log); +} + +/** + * nvme_get_log_cmd_effects() - Retrieve nvme command effects log + * @fd: File descriptor of nvme device + * @csi: Command Set Identifier + * @effects_log:User address to store the effects log + * + * This log page describes the commands that the controller supports and the + * effects of those commands on the state of the NVM subsystem. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_cmd_effects(int fd, enum nvme_csi csi, + struct nvme_cmd_effects_log *effects_log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = effects_log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_CMD_EFFECTS, + .len = sizeof(*effects_log), + .nsid = NVME_NSID_ALL, + .csi = csi, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_device_self_test() - Retrieve the device self test log + * @fd: File descriptor of nvme device + * @log: Userspace address of the log payload + * + * The log page indicates the status of an in progress self test and the + * percent complete of that operation, and the results of the previous 20 + * self-test operations. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_device_self_test(int fd, + struct nvme_self_test_log *log) +{ + return nvme_get_nsid_log(fd, false, NVME_LOG_LID_DEVICE_SELF_TEST, + NVME_NSID_ALL, sizeof(*log), log); +} + +/** + * nvme_get_log_create_telemetry_host() - Create host telemetry log + * @fd: File descriptor of nvme device + * @log: Userspace address of the log payload + */ +static inline int nvme_get_log_create_telemetry_host(int fd, + struct nvme_telemetry_log *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_TELEMETRY_HOST, + .len = sizeof(*log), + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_TELEM_HOST_LSP_CREATE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_telemetry_host() - + * @fd: File descriptor of nvme device + * @offset: Offset into the telemetry data + * @len: Length of provided user buffer to hold the log data in bytes + * @log: User address for log page data + * + * Retreives the Telemetry Host-Initiated log page at the requested offset + * using the previously existing capture. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_telemetry_host(int fd, __u64 offset, + __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_TELEMETRY_HOST, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_TELEM_HOST_LSP_RETAIN, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_telemetry_ctrl() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @offset: Offset into the telemetry data + * @len: Length of provided user buffer to hold the log data in bytes + * @log: User address for log page data + */ +static inline int nvme_get_log_telemetry_ctrl(int fd, bool rae, + __u64 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_TELEMETRY_CTRL, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_endurance_group() - + * @fd: File descriptor of nvme device + * @endgid: Starting group identifier to return in the list + * @log: User address to store the endurance log + * + * This log page indicates if an Endurance Group Event has occurred for a + * particular Endurance Group. If an Endurance Group Event has occurred, the + * details of the particular event are included in the Endurance Group + * Information log page for that Endurance Group. An asynchronous event is + * generated when an entry for an Endurance Group is newly added to this log + * page. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_endurance_group(int fd, __u16 endgid, + struct nvme_endurance_group_log *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_ENDURANCE_GROUP, + .len = sizeof(*log), + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = endgid, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_predictable_lat_nvmset() - + * @fd: File descriptor of nvme device + * @nvmsetid: NVM set id + * @log: User address to store the predictable latency log + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_predictable_lat_nvmset(int fd, __u16 nvmsetid, + struct nvme_nvmset_predictable_lat_log *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_PREDICTABLE_LAT_NVMSET, + .len = sizeof(*log), + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = nvmsetid, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_predictable_lat_event() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @offset: Offset into the predictable latency event + * @len: Length of provided user buffer to hold the log data in bytes + * @log: User address for log page data + */ +static inline int nvme_get_log_predictable_lat_event(int fd, bool rae, + __u32 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_PREDICTABLE_LAT_AGG, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_ana() - + * @fd: File descriptor of nvme device + * @lsp: Log specific, see &enum nvme_get_log_ana_lsp + * @rae: Retain asynchronous events + * @offset: Offset to the start of the log page + * @len: The allocated length of the log page + * @log: User address to store the ana log + * + * This log consists of a header describing the log and descriptors containing + * the asymmetric namespace access information for ANA Groups that contain + * namespaces that are attached to the controller processing the command. + * + * See &struct nvme_ana_rsp_hdr for the defintion of the returned structure. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static int nvme_get_log_ana(int fd, enum nvme_log_ana_lsp lsp, bool rae, + __u64 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_ANA, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = lsp, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_ana_groups() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @len: The allocated length of the log page + * @log: User address to store the ana group log + * + * See &struct nvme_ana_group_desc for the defintion of the returned structure. + */ +static inline int nvme_get_log_ana_groups(int fd, bool rae, __u32 len, + struct nvme_ana_group_desc *log) +{ + return nvme_get_log_ana(fd, NVME_LOG_ANA_LSP_RGO_GROUPS_ONLY, rae, 0, + len, log); +} + +/** + * nvme_get_log_lba_status() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @offset: Offset to the start of the log page + * @len: The allocated length of the log page + * @log: User address to store the log page + */ +static inline int nvme_get_log_lba_status(int fd, bool rae, + __u64 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_LBA_STATUS, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_endurance_grp_evt() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @offset: Offset to the start of the log page + * @len: The allocated length of the log page + * @log: User address to store the log page + */ +static inline int nvme_get_log_endurance_grp_evt(int fd, bool rae, + __u32 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_ENDURANCE_GRP_EVT, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_fid_supported_effects() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @log: FID Supported and Effects data structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise + */ +static inline int nvme_get_log_fid_supported_effects(int fd, bool rae, + struct nvme_fid_supported_effects_log *log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_FID_SUPPORTED_EFFECTS, + NVME_NSID_NONE, sizeof(*log), log); +} + +/** + * nvme_get_log_mi_cmd_supported_effects() - displays the MI Commands Supported byt the controller + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @log: MI Command Supported and Effects data structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise + */ +static inline int nvme_get_log_mi_cmd_supported_effects(int fd, bool rae, + struct nvme_mi_cmd_supported_effects_log *log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_MI_CMD_SUPPORTED_EFFECTS, + NVME_NSID_NONE, sizeof(*log), log); +} + +/** + * nvme_get_log_boot_partition() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @lsp: The log specified field of LID + * @len: The allocated size, minimum + * struct nvme_boot_partition + * @part: User address to store the log page + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise + */ +static inline int nvme_get_log_boot_partition(int fd, bool rae, + __u8 lsp, __u32 len, struct nvme_boot_partition *part) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = part, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_BOOT_PARTITION, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_discovery() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @offset: Offset of this log to retrieve + * @len: The allocated size for this portion of the log + * @log: User address to store the discovery log + * + * Supported only by fabrics discovery controllers, returning discovery + * records. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_discovery(int fd, bool rae, + __u32 offset, __u32 len, void *log) +{ + struct nvme_get_log_args args = { + .lpo = offset, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_DISCOVER, + .len = len, + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_media_unit_stat() - + * @fd: File descriptor of nvme device + * @domid: Domain Identifier selection, if supported + * @mus: User address to store the Media Unit statistics log + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise + */ +static inline int nvme_get_log_media_unit_stat(int fd, __u16 domid, + struct nvme_media_unit_stat_log *mus) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = mus, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_MEDIA_UNIT_STATUS, + .len = sizeof(*mus), + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = domid, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_support_cap_config_list() - + * @fd: File descriptor of nvme device + * @domid: Domain Identifier selection, if supported + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise + */ +static inline int nvme_get_log_support_cap_config_list(int fd, __u16 domid, + struct nvme_supported_cap_config_list_log *cap) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = cap, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_SUPPORTED_CAP_CONFIG_LIST, + .len = sizeof(*cap), + .nsid = NVME_NSID_NONE, + .csi = NVME_CSI_NVM, + .lsi = domid, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_reservation() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @log: User address to store the reservation log + */ +static inline int nvme_get_log_reservation(int fd, bool rae, + struct nvme_resv_notification_log *log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_RESERVATION, + NVME_NSID_ALL, sizeof(*log), log); +} + +/** + * nvme_get_log_sanitize() - + * @fd: File descriptor of nvme device + * @rae: Retain asynchronous events + * @log: User address to store the sanitize log + * + * The Sanitize Status log page reports sanitize operation time estimates and + * information about the most recent sanitize operation. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_sanitize(int fd, bool rae, + struct nvme_sanitize_log_page *log) +{ + return nvme_get_nsid_log(fd, rae, NVME_LOG_LID_SANITIZE, + NVME_NSID_ALL, sizeof(*log), log); +} + +/** + * nvme_get_log_zns_changed_zones() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @rae: Retain asynchronous events + * @log: User address to store the changed zone log + * + * The list of zones that have changed state due to an exceptional event. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_get_log_zns_changed_zones(int fd, __u32 nsid, bool rae, + struct nvme_zns_changed_zone_log *log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_ZNS_CHANGED_ZONES, + .len = sizeof(*log), + .nsid = nsid, + .csi = NVME_CSI_ZNS, + .lsi = NVME_LOG_LSI_NONE, + .lsp = NVME_LOG_LSP_NONE, + .uuidx = NVME_UUID_NONE, + .rae = rae, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * nvme_get_log_persistent_event() - + * @fd: File descriptor of nvme device + * @action: Action the controller should take during processing this command + * @size: Size of @pevent_log + * @pevent_log: User address to store the persistent event log + */ +static inline int nvme_get_log_persistent_event(int fd, + enum nvme_pevent_log_action action, + __u32 size, void *pevent_log) +{ + struct nvme_get_log_args args = { + .lpo = 0, + .result = NULL, + .log = pevent_log, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .lid = NVME_LOG_LID_PERSISTENT_EVENT, + .len = size, + .nsid = NVME_NSID_ALL, + .csi = NVME_CSI_NVM, + .lsi = NVME_LOG_LSI_NONE, + .lsp = action, + .uuidx = NVME_UUID_NONE, + .rae = false, + .ot = false, + }; + return nvme_get_log(&args); +} + +/** + * struct nvme_set_features_args - Arguments for the NVMe Admin Set Feature command + * @result: The command completion result from CQE dword0 + * @data: User address of feature data, if applicable + * @args_size: Size of &struct nvme_set_features_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID, if applicable + * @cdw11: Value to set the feature to + * @cdw12: Feature specific command dword12 field + * @cdw15: Feature specific command dword15 field + * @data_len: Length of feature data, if applicable, in bytes + * @save: Save value across power states + * @uuidx: UUID Index for differentiating vendor specific encoding + * @fid: Feature identifier + */ +struct nvme_set_features_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 cdw11; + __u32 cdw12; + __u32 cdw13; + __u32 cdw15; + __u32 data_len; + bool save; + __u8 uuidx; + __u8 fid; +}; + +/** + * nvme_set_features() - Set a feature attribute + * @args: &struct nvme_set_features_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features(struct nvme_set_features_args *args); + +/** + * nvme_set_features_data() - Helper function for @nvme_set_features() + * @fd: File descriptor of nvme device + * @fid: Feature identifier + * @nsid: Namespace ID, if applicable + * @cdw11: Value to set the feature to + * @save: Save value across power states + * @data_len: Length of feature data, if applicable, in bytes + * @data: User address of feature data, if applicable + * @result: The command completion result from CQE dword0 + */ +static inline int nvme_set_features_data(int fd, __u8 fid, __u32 nsid, + __u32 cdw11, bool save, __u32 data_len, void *data, + __u32 *result) +{ + struct nvme_set_features_args args = { + .result = result, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .cdw11 = cdw11, + .cdw12 = 0, + .cdw13 = 0, + .cdw15 = 0, + .data_len = data_len, + .save = save, + .uuidx = 0, + .fid = fid, + }; + return nvme_set_features(&args); +} + +/** + * nvme_set_features_simple() - Helper functionn for @nvme_set_features() + * @fd: File descriptor of nvme device + * @fid: Feature identifier + * @nsid: Namespace ID, if applicable + * @cdw11: Value to set the feature to + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + */ +static inline int nvme_set_features_simple(int fd, __u8 fid, __u32 nsid, + __u32 cdw11, bool save, __u32 *result) +{ + return nvme_set_features_data(fd, fid, nsid, cdw11, save, 0, NULL, + result); +} + +/** + * nvme_set_features_arbitration() - + * @fd: File descriptor of nvme device + * @ab: Arbitration Burst + * @lpw: Low Priority Weight + * @mpw: Medium Priority Weight + * @hpw: High Priority Weight + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_arbitration(int fd, __u8 ab, __u8 lpw, __u8 mpw, + __u8 hpw, bool save, __u32 *result); + +/** + * nvme_set_features_power_mgmt() - + * @fd: File descriptor of nvme device + * @ps: Power State + * @wh: Workload Hint + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_power_mgmt(int fd, __u8 ps, __u8 wh, bool save, + __u32 *result); + +/** + * nvme_set_features_lba_range() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @nr_ranges: Number of ranges in @data + * @save: Save value across power states + * @data: User address of feature data + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_lba_range(int fd, __u32 nsid, __u32 nr_ranges, bool save, + struct nvme_lba_range_type *data, __u32 *result); + +/** + * nvme_set_features_temp_thresh() - + * @fd: File descriptor of nvme device + * @tmpth: Temperature Threshold + * @tmpsel: Threshold Temperature Select + * @thsel: Threshold Type Select + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_temp_thresh(int fd, __u16 tmpth, __u8 tmpsel, + enum nvme_feat_tmpthresh_thsel thsel, + bool save, __u32 *result); + +/** + * nvme_set_features_err_recovery() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @tler: Time-limited error recovery value + * @dulbe: Deallocated or Unwritten Logical Block Error Enable + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_err_recovery(int fd, __u32 nsid, __u16 tler, + bool dulbe, bool save, __u32 *result); + +/** + * nvme_set_features_volatile_wc() - + * @fd: File descriptor of nvme device + * @wce: Write cache enable + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_volatile_wc(int fd, bool wce, bool save, + __u32 *result); + +/** + * nvme_set_features_irq_coalesce() - + * @fd: File descriptor of nvme device + * @thr: Aggregation Threshold + * @time: Aggregation Time + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_irq_coalesce(int fd, __u8 thr, __u8 time, + bool save, __u32 *result); + +/** + * nvme_set_features_irq_config() - + * @fd: File descriptor of nvme device + * @iv: Interrupt Vector + * @cd: Coalescing Disable + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_irq_config(int fd, __u16 iv, bool cd, bool save, + __u32 *result); + +/** + * nvme_set_features_write_atomic() - + * @fd: File descriptor of nvme device + * @dn: Disable Normal + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_write_atomic(int fd, bool dn, bool save, + __u32 *result); + +/** + * nvme_set_features_async_event() - + * @fd: File descriptor of nvme device + * @events: Events to enable + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_async_event(int fd, __u32 events, bool save, + __u32 *result); + +/** + * nvme_set_features_auto_pst() - + * @fd: File descriptor of nvme device + * @apste: Autonomous Power State Transition Enable + * @apst: Autonomous Power State Transition + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_auto_pst(int fd, bool apste, bool save, + struct nvme_feat_auto_pst *apst, + __u32 *result); + +/** + * nvme_set_features_timestamp() - + * @fd: File descriptor of nvme device + * @save: Save value across power states + * @timestamp: The current timestamp value to assign to this this feature + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_timestamp(int fd, bool save, __u64 timestamp); + +/** + * nvme_set_features_hctm() - + * @fd: File descriptor of nvme device + * @tmt2: Thermal Management Temperature 2 + * @tmt1: Thermal Management Temperature 1 + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_hctm(int fd, __u16 tmt2, __u16 tmt1, bool save, + __u32 *result); + +/** + * nvme_set_features_nopsc() - + * @fd: File descriptor of nvme device + * @noppme: Non-Operational Power State Permissive Mode Enable + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_nopsc(int fd, bool noppme, bool save, __u32 *result); + +/** + * nvme_set_features_rrl() - + * @fd: File descriptor of nvme device + * @rrl: Read recovery level setting + * @nvmsetid: NVM set id + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_rrl(int fd, __u8 rrl, __u16 nvmsetid, bool save, + __u32 *result); + +/** + * nvme_set_features_plm_config() - + * @fd: File descriptor of nvme device + * @enable: Predictable Latency Enable + * @nvmsetid: NVM Set Identifier + * @save: Save value across power states + * @data: Pointer to structure nvme_plm_config + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_plm_config(int fd, bool enable, __u16 nvmsetid, + bool save, struct nvme_plm_config *data, + __u32*result); + +/** + * nvme_set_features_plm_window() - + * @fd: File descriptor of nvme device + * @sel: Window Select + * @nvmsetid: NVM Set Identifier + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_plm_window(int fd, enum nvme_feat_plm_window_select sel, + __u16 nvmsetid, bool save, __u32 *result); + +/** + * nvme_set_features_lba_sts_interval() - + * @fd: File descriptor of nvme device + * @save: Save value across power states + * @lsiri: LBA Status Information Report Interval + * @lsipi: LBA Status Information Poll Interval + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_lba_sts_interval(int fd, __u16 lsiri, __u16 lsipi, + bool save, __u32 *result); + +/** + * nvme_set_features_host_behavior() - + * @fd: File descriptor of nvme device + * @save: Save value across power states + * @data: Pointer to structure nvme_feat_host_behavior + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_host_behavior(int fd, bool save, + struct nvme_feat_host_behavior *data); + +/** + * nvme_set_features_sanitize() - + * @fd: File descriptor of nvme device + * @nodrm: No-Deallocate Response Mode + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_sanitize(int fd, bool nodrm, bool save, __u32 *result); + +/** + * nvme_set_features_endurance_evt_cfg() - + * @fd: File descriptor of nvme device + * @endgid: Endurance Group Identifier + * @egwarn: Flags to enable warning, see &enum nvme_eg_critical_warning_flags + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_endurance_evt_cfg(int fd, __u16 endgid, __u8 egwarn, + bool save, __u32 *result); + +/** + * nvme_set_features_sw_progress() - + * @fd: File descriptor of nvme device + * @pbslc: Pre-boot Software Load Count + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_sw_progress(int fd, __u8 pbslc, bool save, + __u32 *result); + +/** + * nvme_set_features_host_id() - + * @fd: File descriptor of nvme device + * @exhid: Enable Extended Host Identifier + * @save: Save value across power states + * @hostid: Host ID to set + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_host_id(int fd, bool exhid, bool save, __u8 *hostid); + +/** + * nvme_set_features_resv_mask() - + * @fd: File descriptor of nvme device + * @mask: Reservation Notification Mask Field + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_resv_mask(int fd, __u32 mask, bool save, __u32 *result); + +/** + * nvme_set_features_resv_persist() - + * @fd: File descriptor of nvme device + * @ptpl: Persist Through Power Loss + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_resv_persist(int fd, bool ptpl, bool save, __u32 *result); + +/** + * nvme_set_features_write_protect() - + * @fd: File descriptor of nvme device + * @state: Write Protection State + * @save: Save value across power states + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_features_write_protect(int fd, enum nvme_feat_nswpcfg_state state, + bool save, __u32 *result); +/** + * struct nvme_get_features_args - Arguments for the NVMe Admin Get Feature command + * @args_size: Size of &struct nvme_get_features_args + * @fd: File descriptor of nvme device + * @result: The command completion result from CQE dword0 + * @timeout: Timeout in ms + * @nsid: Namespace ID, if applicable + * @sel: Select which type of attribute to return, + * see &enum nvme_get_features_sel + * @cdw11: Feature specific command dword11 field + * @data_len: Length of feature data, if applicable, in bytes + * @data: User address of feature data, if applicable + * @fid: Feature identifier, see &enum nvme_features_id + * @uuidx: UUID Index for differentiating vendor specific encoding + */ +struct nvme_get_features_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_get_features_sel sel; + __u32 cdw11; + __u32 data_len; + __u8 fid; + __u8 uuidx; +}; + +/** + * nvme_get_features() - Retrieve a feature attribute + * @args: &struct nvme_get_features_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features(struct nvme_get_features_args *args); + +/** + * nvme_get_features_data() - Helper function for @nvme_get_features() + * @fd: File descriptor of nvme device + * @fid: Feature identifier + * @nsid: Namespace ID, if applicable + * @data_len: Length of feature data, if applicable, in bytes + * @data: User address of feature data, if applicable + * @result: The command completion result from CQE dword0 + */ +static inline int nvme_get_features_data(int fd, enum nvme_features_id fid, + __u32 nsid, __u32 data_len, void *data, __u32 *result) +{ + struct nvme_get_features_args args = { + .result = result, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .sel = NVME_GET_FEATURES_SEL_CURRENT, + .cdw11 = 0, + .data_len = data_len, + .fid = fid, + .uuidx = NVME_UUID_NONE, + }; + + return nvme_get_features(&args); +} + +/** + * nvme_get_features_simple() - Helper function for @nvme_get_features() + * @fd: File descriptor of nvme device + * @fid: Feature identifier + * @nsid: Namespace ID, if applicable + * @result: The command completion result from CQE dword0 + */ +static inline int nvme_get_features_simple(int fd, enum nvme_features_id fid, + __u32 nsid, __u32 *result) +{ + return nvme_get_features_data(fd, fid, nsid, 0, NULL, result); +} + +/** + * nvme_get_features_arbitration() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_arbitration(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_power_mgmt() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_power_mgmt(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_lba_range() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @data: User address of feature data, if applicable + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_lba_range(int fd, enum nvme_get_features_sel sel, + struct nvme_lba_range_type *data, + __u32 *result); + +/** + * nvme_get_features_temp_thresh() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_temp_thresh(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_err_recovery() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_err_recovery(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_volatile_wc() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_volatile_wc(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_num_queues() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_num_queues(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_irq_coalesce() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_irq_coalesce(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_irq_config() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @iv: + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_irq_config(int fd, enum nvme_get_features_sel sel, + __u16 iv, __u32 *result); + +/** + * nvme_get_features_write_atomic() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_write_atomic(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_async_event() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_async_event(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_auto_pst() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @apst: + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_auto_pst(int fd, enum nvme_get_features_sel sel, + struct nvme_feat_auto_pst *apst, __u32 *result); + +/** + * nvme_get_features_host_mem_buf() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_host_mem_buf(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_timestamp() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @ts: Current timestamp + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_timestamp(int fd, enum nvme_get_features_sel sel, + struct nvme_timestamp *ts); + +/** + * nvme_get_features_kato() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_kato(int fd, enum nvme_get_features_sel sel, __u32 *result); + +/** + * nvme_get_features_hctm() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_hctm(int fd, enum nvme_get_features_sel sel, __u32 *result); + +/** + * nvme_get_features_nopsc() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_nopsc(int fd, enum nvme_get_features_sel sel, __u32 *result); + +/** + * nvme_get_features_rrl() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_rrl(int fd, enum nvme_get_features_sel sel, __u32 *result); + +/** + * nvme_get_features_plm_config() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @nvmsetid: NVM set id + * @data: + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_plm_config(int fd, enum nvme_get_features_sel sel, + __u16 nvmsetid, struct nvme_plm_config *data, + __u32 *result); + +/** + * nvme_get_features_plm_window() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @nvmsetid: NVM set id + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_plm_window(int fd, enum nvme_get_features_sel sel, + __u16 nvmsetid, __u32 *result); + +/** + * nvme_get_features_lba_sts_interval() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_lba_sts_interval(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_host_behavior() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @data: Poniter to structure nvme_feat_host_behavior + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_host_behavior(int fd, enum nvme_get_features_sel sel, + struct nvme_feat_host_behavior *data, + __u32 *result); + +/** + * nvme_get_features_sanitize() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_sanitize(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_endurance_event_cfg() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @endgid: Endurance Group Identifier + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_endurance_event_cfg(int fd, enum nvme_get_features_sel sel, + __u16 endgid, __u32 *result); + +/** + * nvme_get_features_sw_progress() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_sw_progress(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_host_id() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @exhid: Enable Extended Host Identifier + * @len: Length of @hostid + * @hostid: Buffer for returned host ID + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_host_id(int fd, enum nvme_get_features_sel sel, + bool exhid, __u32 len, __u8 *hostid); + +/** + * nvme_get_features_resv_mask() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_resv_mask(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_resv_persist() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_resv_persist(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_write_protect() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_write_protect(int fd, __u32 nsid, + enum nvme_get_features_sel sel, + __u32 *result); + +/** + * nvme_get_features_iocs_profile() - + * @fd: File descriptor of nvme device + * @sel: Select which type of attribute to return, see &enum nvme_get_features_sel + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_features_iocs_profile(int fd, enum nvme_get_features_sel sel, + __u32 *result); + +/** + * struct nvme_format_nvm_args - Arguments for the Format Nvme Namespace command + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_format_nvm_args + * @fd: File descriptor of nvme device + * @timeout: Set to override default timeout to this value in milliseconds; + * useful for long running formats. 0 will use system default. + * @nsid: Namespace ID to format + * @mset: Metadata settings (extended or separated), true if extended + * @pi: Protection information type + * @pil: Protection information location (beginning or end), true if end + * @ses: Secure erase settings + * @lbaf: Logical block address format + */ +struct nvme_format_nvm_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_cmd_format_mset mset; + enum nvme_cmd_format_pi pi; + enum nvme_cmd_format_pil pil; + enum nvme_cmd_format_ses ses; + __u8 lbaf; +}; + +/** + * nvme_format_nvm() - Format nvme namespace(s) + * @args: &struct nvme_format_nvme_args argument structure + * + * The Format NVM command low level formats the NVM media. This command is used + * by the host to change the LBA data size and/or metadata size. A low level + * format may destroy all data and metadata associated with all namespaces or + * only the specific namespace associated with the command + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_format_nvm(struct nvme_format_nvm_args *args); + +/** + * struct nvme_ns_mgmt_args - Arguments for NVMe Namespace Management command + * @result: NVMe command result + * @ns: Namespace identication descriptors + * @args_size: Size of &struct nvme_ns_mgmt_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @sel: Type of management operation to perform + * @csi: Command Set Identifier + */ +struct nvme_ns_mgmt_args { + __u32 *result; + struct nvme_id_ns *ns; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_ns_mgmt_sel sel; + __u8 csi; +}; + +/** + * nvme_ns_mgmt() - Issue a Namespace management command + * @args: &struct nvme_ns_mgmt_args Argument structure + */ +int nvme_ns_mgmt(struct nvme_ns_mgmt_args *args); + +/** + * nvme_ns_mgmt_create() - + * @fd: File descriptor of nvme device + * @ns: Namespace identification that defines ns creation parameters + * @nsid: On success, set to the namespace id that was created + * @timeout: Overide the default timeout to this value in milliseconds; + * set to 0 to use the system default. + * @csi: Command Set Identifier + * + * On successful creation, the namespace exists in the subsystem, but is not + * attached to any controller. Use the nvme_ns_attach_ctrls() to assign the + * namespace to one or more controllers. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_ns_mgmt_create(int fd, struct nvme_id_ns *ns, + __u32 *nsid, __u32 timeout, __u8 csi) +{ + struct nvme_ns_mgmt_args args = { + .result = nsid, + .ns = ns, + .args_size = sizeof(args), + .fd = fd, + .timeout = timeout, + .nsid = NVME_NSID_NONE, + .sel = NVME_NS_MGMT_SEL_CREATE, + .csi = csi, + }; + + return nvme_ns_mgmt(&args); +} + +/** + * nvme_ns_mgmt_delete() - + * @fd: File descriptor of nvme device + * @nsid: Namespace identifier to delete + * + * It is recommended that a namespace being deleted is not attached to any + * controller. Use the nvme_ns_detach_ctrls() first if the namespace is still + * attached. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_ns_mgmt_delete(int fd, __u32 nsid) +{ + struct nvme_ns_mgmt_args args = { + .result = NULL, + .ns = NULL, + .args_size = sizeof(args), + .fd = fd, + .timeout = 0, + .nsid = nsid, + .sel = NVME_NS_MGMT_SEL_DELETE, + .csi = 0, + }; + + return nvme_ns_mgmt(&args); +} + +/** + * struct nvme_ns_attach_args - Arguments for Nvme Namespace Management command + * @result: NVMe command result + * @ctrlist: Controller list to modify attachment state of nsid + * @args_size: Size of &struct nvme_ns_attach_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID to execute attach selection + * @sel: Attachment selection, see &enum nvme_ns_attach_sel + */ +struct nvme_ns_attach_args { + __u32 *result; + struct nvme_ctrl_list *ctrlist; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_ns_attach_sel sel; +}; + +/** + * nvme_ns_attach() - Attach or detach namespace to controller(s) + * @args: &struct nvme_ns_attach_args Argument structure + */ +int nvme_ns_attach(struct nvme_ns_attach_args *args); + +/** + * nvme_ns_attach_ctrls() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID to attach + * @ctrlist: Controller list to modify attachment state of nsid + */ +static inline int nvme_ns_attach_ctrls(int fd, __u32 nsid, + struct nvme_ctrl_list *ctrlist) +{ + struct nvme_ns_attach_args args = { + .result = NULL, + .ctrlist = ctrlist, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .sel = NVME_NS_ATTACH_SEL_CTRL_ATTACH, + }; + + return nvme_ns_attach(&args); +} + +/** + * nvme_ns_detach_ctrls() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID to detach + * @ctrlist: Controller list to modify attachment state of nsid + */ +static inline int nvme_ns_detach_ctrls(int fd, __u32 nsid, + struct nvme_ctrl_list *ctrlist) +{ + struct nvme_ns_attach_args args = { + .result = NULL, + .ctrlist = ctrlist, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .sel = NVME_NS_ATTACH_SEL_CTRL_DEATTACH, + }; + + return nvme_ns_attach(&args); +} + +/** + * struct nvme_fw_download_args - Arguments for the NVMe Firmware Download command + * @args_size: Size of &struct nvme_fw_download_args + * @fd: File descriptor of nvme device + * @result: The command completion result from CQE dword0 + * @timeout: Timeout in ms + * @offset: Offset in the firmware data + * @data: Userspace address of the firmware data + * @data_len: Length of data in this command in bytes + */ +struct nvme_fw_download_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 offset; + __u32 data_len; +}; + +/** + * nvme_fw_download() - Download part or all of a firmware image to the + * controller + * @args: &struct nvme_fw_download_args argument structure + * + * The Firmware Image Download command downloads all or a portion of an image + * for a future update to the controller. The Firmware Image Download command + * downloads a new image (in whole or in part) to the controller. + * + * The image may be constructed of multiple pieces that are individually + * downloaded with separate Firmware Image Download commands. Each Firmware + * Image Download command includes a Dword Offset and Number of Dwords that + * specify a dword range. + * + * The new firmware image is not activated as part of the Firmware Image + * Download command. Use the nvme_fw_commit() to activate a newly downloaded + * image. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_fw_download(struct nvme_fw_download_args *args); + +/** + * struct nvme_fw_commit_args - Arguments for the NVMe Firmware Commit command + * @args_size: Size of &struct nvme_fw_commit_args + * @fd: File descriptor of nvme device + * @action: Action to use for the firmware image, see &enum nvme_fw_commit_ca + * @timeout: Timeout in ms + * @result: The command completion result from CQE dword0 + * @slot: Firmware slot to commit the downloaded image + * @bpid: Set to true to select the boot partition id + */ +struct nvme_fw_commit_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + enum nvme_fw_commit_ca action; + __u8 slot; + bool bpid; +}; + +/** + * nvme_fw_commit() - Commit firmware using the specified action + * @args: &struct nvme_fw_commit_args argument structure + * + * The Firmware Commit command modifies the firmware image or Boot Partitions. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. The command + * status response may specify additional reset actions required to complete + * the commit process. + */ +int nvme_fw_commit(struct nvme_fw_commit_args *args); + +/** + * struct nvme_security_send_args - Arguments for the NVMe Security Send command + * @result: The command completion result from CQE dword0 + * @data: Security data payload to send + * @args_size: Size of &struct nvme_security_send_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID to issue security command on + * @tl: Protocol specific transfer length + * @data_len: Data length of the payload in bytes + * @nssf: NVMe Security Specific field + * @spsp0: Security Protocol Specific field + * @spsp1: Security Protocol Specific field + * @secp: Security Protocol + */ +struct nvme_security_send_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 tl; + __u32 data_len; + __u8 nssf; + __u8 spsp0; + __u8 spsp1; + __u8 secp; +}; + +/** + * nvme_security_send() - + * @args: &struct nvme_security_send argument structure + * + * The Security Send command transfers security protocol data to the + * controller. The data structure transferred to the controller as part of this + * command contains security protocol specific commands to be performed by the + * controller. The data structure transferred may also contain data or + * parameters associated with the security protocol commands. + * + * The security data is protocol specific and is not defined by the NVMe + * specification. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_security_send(struct nvme_security_send_args *args); + +/** + * struct nvme_security_receive_args - Arguments for the NVMe Security Receive command + * @result: The command completion result from CQE dword0 + * @data: Security data payload to send + * @args_size: Size of &struct nvme_security_receive_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID to issue security command on + * @al: Protocol specific allocation length + * @data_len: Data length of the payload in bytes + * @nssf: NVMe Security Specific field + * @spsp0: Security Protocol Specific field + * @spsp1: Security Protocol Specific field + * @secp: Security Protocol + */ +struct nvme_security_receive_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 al; + __u32 data_len; + __u8 nssf; + __u8 spsp0; + __u8 spsp1; + __u8 secp; +}; + +/** + * nvme_security_receive() - + * @args: &struct nvme_security_recevice argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_security_receive(struct nvme_security_receive_args *args); + +/** + * struct nvme_get_lba_status_args - Arguments for the NVMe Get LBA Status command + * @lbas: Data payload to return status descriptors + * @result: The command completion result from CQE dword0 + * @slba: Starting logical block address to check statuses + * @args_size: Size of &struct nvme_get_lba_status_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID to retrieve LBA status + * @mndw: Maximum number of dwords to return + * @atype: Action type mechanism to determine LBA status desctriptors to + * return, see &enum nvme_lba_status_atype + * @rl: Range length from slba to perform the action + */ +struct nvme_get_lba_status_args { + __u64 slba; + __u32 *result; + struct nvme_lba_status *lbas; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 mndw; + enum nvme_lba_status_atype atype; + __u16 rl; +}; + +/** + * nvme_get_lba_status() - Retrieve information on possibly unrecoverable LBAs + * @args: &struct nvme_get_lba_status_args argument structure + * + * The Get LBA Status command requests information about Potentially + * Unrecoverable LBAs. Refer to the specification for action type descriptions. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_lba_status(struct nvme_get_lba_status_args *args); + +/** + * struct nvme_directive_send_args - Arguments for the NVMe Directive Send command + * @result: If successful, the CQE dword0 value + * @data: Data payload to to be send + * @args_size: Size of &struct nvme_directive_send_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID, if applicable + * @doper: Directive send operation, see &enum nvme_directive_send_doper + * @dtype: Directive type, see &enum nvme_directive_dtype + * @cdw12: Directive specific command dword12 + * @data_len: Length of data payload in bytes + * @dspec: Directive specific field + */ +struct nvme_directive_send_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_directive_send_doper doper; + enum nvme_directive_dtype dtype; + __u32 cdw12; + __u32 data_len; + __u16 dspec; +}; + +/** + * nvme_directive_send() - Send directive command + * @args: &struct nvme_directive_send_args argument structure + * + * Directives is a mechanism to enable host and NVM subsystem or controller + * information exchange. The Directive Send command transfers data related to a + * specific Directive Type from the host to the controller. + * + * See the NVMe specification for more information. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_directive_send(struct nvme_directive_send_args *args); + +/** + * nvme_directive_send_id_endir() - + * @fd: File descriptor of nvme device + * @nsid: Namespace Identifier + * @endir: Enable Directive + * @dtype: Directive Type + * @id: Pointer to structure nvme_id_directives + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_directive_send_id_endir(int fd, __u32 nsid, bool endir, + enum nvme_directive_dtype dtype, + struct nvme_id_directives *id); + +/** + * nvme_directive_send_stream_release_identifier() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @stream_id: Stream identifier + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_send_stream_release_identifier(int fd, + __u32 nsid, __u16 stream_id) +{ + struct nvme_directive_send_args args = { + .result = NULL, + .data = NULL, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_SEND_STREAMS_DOPER_RELEASE_IDENTIFIER, + .dtype = NVME_DIRECTIVE_DTYPE_STREAMS, + .cdw12 = 0, + .data_len = 0, + .dspec = stream_id, + }; + + return nvme_directive_send(&args); +} + +/** + * nvme_directive_send_stream_release_resource() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_send_stream_release_resource(int fd, __u32 nsid) +{ + struct nvme_directive_send_args args = { + .result = NULL, + .data = NULL, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_SEND_STREAMS_DOPER_RELEASE_RESOURCE, + .dtype = NVME_DIRECTIVE_DTYPE_STREAMS, + .cdw12 = 0, + .data_len = 0, + .dspec = 0, + }; + + return nvme_directive_send(&args); +} + +/** + * struct nvme_directive_recv_args - Arguments for the NVMe Directive Receive command + * @result: If successful, the CQE dword0 value + * @data: Usespace address of data payload + * @args_size: Size of &struct nvme_directive_recv_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID, if applicable + * @doper: Directive send operation, see &enum nvme_directive_send_doper + * @dtype: Directive type, see &enum nvme_directive_dtype + * @cdw12: Directive specific command dword12 + * @data_len: Length of data payload in bytes + * @dspec: Directive specific field + */ +struct nvme_directive_recv_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_directive_receive_doper doper; + enum nvme_directive_dtype dtype; + __u32 cdw12; + __u32 data_len; + __u16 dspec; +}; + +/** + * nvme_directive_recv() - Receive directive specific data + * @args: &struct nvme_directive_recv_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_directive_recv(struct nvme_directive_recv_args *args); + +/** + * nvme_directive_recv_identify_parameters() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @id: Identify parameters buffer + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_recv_identify_parameters(int fd, __u32 nsid, + struct nvme_id_directives *id) +{ + struct nvme_directive_recv_args args = { + .result = NULL, + .data = id, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_RECEIVE_IDENTIFY_DOPER_PARAM, + .dtype = NVME_DIRECTIVE_DTYPE_IDENTIFY, + .cdw12 = 0, + .data_len = sizeof(*id), + .dspec = 0, + }; + + return nvme_directive_recv(&args); +} + +/** + * nvme_directive_recv_stream_parameters() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @parms: Streams directive parameters buffer + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_recv_stream_parameters(int fd, __u32 nsid, + struct nvme_streams_directive_params *parms) +{ + struct nvme_directive_recv_args args = { + .result = NULL, + .data = parms, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_PARAM, + .dtype = NVME_DIRECTIVE_DTYPE_STREAMS, + .cdw12 = 0, + .data_len = sizeof(*parms), + .dspec = 0, + }; + + return nvme_directive_recv(&args); +} + +/** + * nvme_directive_recv_stream_status() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @nr_entries: Number of streams to receive + * @id: Stream status buffer + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_recv_stream_status(int fd, __u32 nsid, + unsigned nr_entries, + struct nvme_streams_directive_status *id) +{ + struct nvme_directive_recv_args args = { + .result = NULL, + .data = id, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_STATUS, + .dtype = NVME_DIRECTIVE_DTYPE_STREAMS, + .cdw12 = 0, + .data_len = sizeof(*id), + .dspec = 0, + }; + + return nvme_directive_recv(&args); +} + +/** + * nvme_directive_recv_stream_allocate() - + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @nsr: Namespace Streams Requested + * @result: If successful, the CQE dword0 value + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_directive_recv_stream_allocate(int fd, __u32 nsid, + __u16 nsr, __u32 *result) +{ + struct nvme_directive_recv_args args = { + .result = result, + .data = NULL, + .args_size = sizeof(args), + .fd = fd, + .timeout = NVME_DEFAULT_IOCTL_TIMEOUT, + .nsid = nsid, + .doper = NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_RESOURCE, + .dtype = NVME_DIRECTIVE_DTYPE_STREAMS, + .cdw12 = nsr, + .data_len = 0, + .dspec = 0, + }; + + return nvme_directive_recv(&args); +} + +/** + * struct nvme_capacity_mgmt_args - Arguments for the NVMe Capacity Management command + * @result: If successful, the CQE dword0 value + * @args_size: Size of &struct nvme_capacity_mgmt_args + * @fd: File descriptor of nvme device + * @cdw11: Least significant 32 bits of the capacity in bytes of the + * Endurance Group or NVM Set to be created + * @cdw12: Most significant 32 bits of the capacity in bytes of the + * Endurance Group or NVM Set to be created + * @timeout: Timeout in ms + * @element_id: Value specific to the value of the Operation field + * @op: Operation to be performed by the controller + */ +struct nvme_capacity_mgmt_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 cdw11; + __u32 cdw12; + __u16 element_id; + __u8 op; +}; + +/** + * nvme_capacity_mgmt() - + * @args: &struct nvme_capacity_mgmt_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_capacity_mgmt(struct nvme_capacity_mgmt_args *args); + +/** + * struct nvme_lockdown_args - Arguments for the NVME Lockdown command + * @args_size: Size of &struct nvme_lockdown_args + * @fd: File descriptor of nvme device + * @result: The command completion result from CQE dword0 + * @timeout: Timeout in ms (0 for default timeout) + * @scp: Scope of the command + * @prhbt: Prohibit or allow the command opcode or Set Features command + * @ifc: Affected interface + * @ofi: Opcode or Feature Identifier + * @uuidx: UUID Index if controller supports this id selection method + */ +struct nvme_lockdown_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u8 scp; + __u8 prhbt; + __u8 ifc; + __u8 ofi; + __u8 uuidx; +}; + +/** + * nvme_lockdown() - Issue lockdown command + * @args: &struct nvme_lockdown_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_lockdown(struct nvme_lockdown_args *args); + +/** + * struct nvme_set_property_args - Arguments for NVMe Set Property command + * @args_size: Size of &struct nvme_set_property_args + * @fd: File descriptor of nvme device + * @result: The command completion result from CQE dword0 + * @timeout: Timeout in ms + * @offset: Property offset from the base to set + * @value: The value to set the property + */ +struct nvme_set_property_args { + __u64 value; + __u32 *result; + int args_size; + int fd; + __u32 timeout; + int offset; +}; + +/** + * nvme_set_property() - Set controller property + * @args: &struct nvme_set_property_args argument structure + * + * This is an NVMe-over-Fabrics specific command, not applicable to PCIe. These + * properties align to the PCI MMIO controller registers. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_set_property(struct nvme_set_property_args *args); + +/** + * struct nvme_get_property_args - Arguments for NVMe Get Property command + * @value: Where the property's value will be stored on success + * @args_size: Size of &struct nvme_get_property_args + * @fd: File descriptor of nvme device + * @offset: Property offset from the base to retrieve + * @timeout: Timeout in ms + */ +struct nvme_get_property_args { + __u64 *value; + int args_size; + int fd; + __u32 timeout; + int offset; +}; + +/** + * nvme_get_property() - Get a controller property + * @args: &struct nvme_get_propert_args argument structure + * + * This is an NVMe-over-Fabrics specific command, not applicable to PCIe. These + * properties align to the PCI MMIO controller registers. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_get_property(struct nvme_get_property_args *args); + +/** + * struct nvme_sanitize_nvm_args - Arguments for the NVMe Sanitize NVM command + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_sanitize_nvm_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @ovrpat: Overwrite pattern + * @sanact: Sanitize action, see &enum nvme_sanitize_sanact + * @ause: Set to allow unrestriced sanitize exit + * @owpass: Overwrite pass count + * @oipbp: Set to overwrite invert pattern between passes + * @nodas: Set to not deallocate blocks after sanitizing + */ +struct nvme_sanitize_nvm_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + enum nvme_sanitize_sanact sanact; + __u32 ovrpat; + bool ause; + __u8 owpass; + bool oipbp; + bool nodas; +}; + +/** + * nvme_sanitize_nvm() - Start a sanitize operation + * @args: &struct nvme_sanitize_nvm_args argument structure + * + * A sanitize operation alters all user data in the NVM subsystem such that + * recovery of any previous user data from any cache, the non-volatile media, + * or any Controller Memory Buffer is not possible. + * + * The Sanitize command starts a sanitize operation or to recover from a + * previously failed sanitize operation. The sanitize operation types that may + * be supported are Block Erase, Crypto Erase, and Overwrite. All sanitize + * operations are processed in the background, i.e., completion of the sanitize + * command does not indicate completion of the sanitize operation. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_sanitize_nvm(struct nvme_sanitize_nvm_args *args); + +/** + * struct nvme_dev_self_test_args - Arguments for the NVMe Device Self Test command + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_dev_self_test_args + * @fd: File descriptor of nvme device + * @nsid: Namespace ID to test + * @stc: Self test code, see &enum nvme_dst_stc + * @timeout: Timeout in ms + */ +struct nvme_dev_self_test_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_dst_stc stc; +}; + +/** + * nvme_dev_self_test() - Start or abort a self test + * @args: &struct nvme_dev_self_test argument structure + * + * The Device Self-test command starts a device self-test operation or abort a + * device self-test operation. A device self-test operation is a diagnostic + * testing sequence that tests the integrity and functionality of the + * controller and may include testing of the media associated with namespaces. + * The controller may return a response to this command immediately while + * running the self-test in the background. + * + * Set the 'nsid' field to 0 to not include namepsaces in the test. Set to + * 0xffffffff to test all namespaces. All other values tests a specific + * namespace, if present. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_dev_self_test(struct nvme_dev_self_test_args *args); + +/** + * struct nvme_virtual_mgmt_args - Arguments for the NVMe Virtualization + * resource management command + * @args_size: Size of &struct nvme_virtual_mgmt_args + * @fd: File descriptor of nvme device + * @result: If successful, the CQE dword0 + * @timeout: Timeout in ms + * @act: Virtual resource action, see &enum nvme_virt_mgmt_act + * @rt: Resource type to modify, see &enum nvme_virt_mgmt_rt + * @cntlid: Controller id for which resources are bing modified + * @nr: Number of resources being allocated or assigned + */ +struct nvme_virtual_mgmt_args { + __u32 *result; + int args_size; + int fd; + __u32 timeout; + enum nvme_virt_mgmt_act act; + enum nvme_virt_mgmt_rt rt; + __u16 cntlid; + __u16 nr; +}; + +/** + * nvme_virtual_mgmt() - Virtualization resource management + * @args: &struct nvme_virtual_mgmt_args argument structure + * + * The Virtualization Management command is supported by primary controllers + * that support the Virtualization Enhancements capability. This command is + * used for several functions: + * + * - Modifying Flexible Resource allocation for the primary controller + * - Assigning Flexible Resources for secondary controllers + * - Setting the Online and Offline state for secondary controllers + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_virtual_mgmt(struct nvme_virtual_mgmt_args *args); + +/** + * nvme_flush() - Send an nvme flush command + * @fd: File descriptor of nvme device + * @nsid: Namespace identifier + * + * The Flush command requests that the contents of volatile write cache be made + * non-volatile. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_flush(int fd, __u32 nsid) { + struct nvme_passthru_cmd cmd = {}; + + cmd.opcode = nvme_cmd_flush; + cmd.nsid = nsid; + + return nvme_submit_io_passthru(fd, &cmd, NULL); +} + +/** + * struct nvme_io_args - Arguments for NVMe I/O commands + * @slba: Starting logical block + * @storage_tag: This filed specifies Variable Sized Expected Logical Block + * Storage Tag (ELBST) and Expected Logical Block Reference + * Tag (ELBRT) + * @result: The command completion result from CQE dword0 + * @data: Pointer to user address of the data buffer + * @metadata: Pointer to user address of the metadata buffer + * @args_size: Size of &struct nvme_io_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID + * @data_len: Length of user buffer, @data, in bytes + * @metadata_len:Length of user buffer, @metadata, in bytes + * @nlb: Number of logical blocks to send (0's based value) + * @control: Command control flags, see &enum nvme_io_control_flags. + * @apptag: This field specifies the Application Tag Mask expected value. + * Used only if the namespace is formatted to use end-to-end + * protection information. + * @appmask: This field specifies the Application Tag expected value. Used + * only if the namespace is formatted to use end-to-end protection + * information. + * @reftag: This field specifies the Initial Logical Block Reference Tag + * expected value. Used only if the namespace is formatted to use + * end-to-end protection information. + * @dspec: Directive specific value + * @dsm: Data set management attributes, see &enum nvme_io_dsm_flags + */ +struct nvme_io_args { + __u64 slba; + __u64 storage_tag; + __u32 *result; + void *data; + void *metadata; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 reftag; + __u32 data_len; + __u32 metadata_len; + __u16 nlb; + __u16 control; + __u16 apptag; + __u16 appmask; + __u16 dspec; + __u8 dsm; +}; + +/** + * nvme_io() - Submit an nvme user I/O command + * @args: &struct nvme_io_args argument structure + * @opcode: Opcode to execute + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_io(struct nvme_io_args *args, __u8 opcode); + +/** + * nvme_read() - Submit an nvme user read command + * @args: &struct nvme_io_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_read(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_read); +} + +/** + * nvme_write() - Submit an nvme user write command + * @args: &struct nvme_io_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_write(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_write); +} + +/** + * nvme_compare() - Submit an nvme user compare command + * @args: &struct nvme_io_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_compare(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_compare); +} + +/** + * nvme_write_zeros() - Submit an nvme write zeroes command + * @args: &struct nvme_io_args argument structure + * + * The Write Zeroes command sets a range of logical blocks to zero. After + * successful completion of this command, the value returned by subsequent + * reads of logical blocks in this range shall be all bytes cleared to 0h until + * a write occurs to this LBA range. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_write_zeros(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_write_zeroes); +} + +/** + * nvme_write_uncorrectable() - Submit an nvme write uncorrectable command + * @args: &struct nvme_io_args argument structure + * + * The Write Uncorrectable command marks a range of logical blocks as invalid. + * When the specified logical block(s) are read after this operation, a failure + * is returned with Unrecovered Read Error status. To clear the invalid logical + * block status, a write operation on those logical blocks is required. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_write_uncorrectable(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_write_uncor); +} + +/** + * nvme_verify() - Send an nvme verify command + * @args: &struct nvme_io_args argument structure + * + * The Verify command verifies integrity of stored information by reading data + * and metadata, if applicable, for the LBAs indicated without transferring any + * data or metadata to the host. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_verify(struct nvme_io_args *args) +{ + return nvme_io(args, nvme_cmd_verify); +} + +/** + * struct nvme_dsm_args - Arguments for the NVMe Dataset Management command + * @result: The command completion result from CQE dword0 + * @dsm: The data set management attributes + * @args_size: Size of &struct nvme_dsm_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @attrs: DSM attributes, see &enum nvme_dsm_attributes + * @nr_ranges: Number of block ranges in the data set management attributes + */ +struct nvme_dsm_args { + __u32 *result; + struct nvme_dsm_range *dsm; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 attrs; + __u16 nr_ranges; +}; + +/** + * nvme_dsm() - Send an nvme data set management command + * @args: &struct nvme_dsm_args argument structure + * + * The Dataset Management command is used by the host to indicate attributes + * for ranges of logical blocks. This includes attributes like frequency that + * data is read or written, access size, and other information that may be used + * to optimize performance and reliability, and may be used to + * deallocate/unmap/trim those logical blocks. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_dsm(struct nvme_dsm_args *args); + +/** + * struct nvme_copy_args - Arguments for the NVMe Copy command + * @sdlba: Start destination LBA + * @result: The command completion result from CQE dword0 + * @copy: Range descriptior + * @args_size: Size of &struct nvme_copy_args + * @fd: File descriptor of the nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @ilbrt: Initial logical block reference tag + * @lr: Limited retry + * @fua: Force unit access + * @nr: Number of ranges + * @dspec: Directive specific value + * @lbatm: Logical block application tag mask + * @lbat: Logical block application tag + * @prinfor: Protection information field for read + * @prinfow: Protection information field for write + * @dtype: Directive type + * @format: Descriptor format + */ +struct nvme_copy_args { + __u64 sdlba; + __u32 *result; + struct nvme_copy_range *copy; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 ilbrt; + int lr; + int fua; + __u16 nr; + __u16 dspec; + __u16 lbatm; + __u16 lbat; + __u8 prinfor; + __u8 prinfow; + __u8 dtype; + __u8 format; +}; + +/** + * nvme_copy() - + * + * @args: &struct nvme_copy_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_copy(struct nvme_copy_args *args); + +/** + * struct nvme_resv_acquire_args - Arguments for the NVMe Reservation Acquire Comand + * @nrkey: The reservation key to be unregistered from the namespace if + * the action is preempt + * @iekey: Set to ignore the existing key + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_resv_acquire_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @rtype: The type of reservation to be create, see &enum nvme_resv_rtype + * @racqa: The action that is performed by the command, see &enum nvme_resv_racqa + * @crkey: The current reservation key associated with the host + */ +struct nvme_resv_acquire_args { + __u64 crkey; + __u64 nrkey; + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_resv_rtype rtype; + enum nvme_resv_racqa racqa; + bool iekey; +}; + +/** + * nvme_resv_acquire() - Send an nvme reservation acquire + * @args: &struct nvme_resv_acquire argument structure + * + * The Reservation Acquire command acquires a reservation on a namespace, + * preempt a reservation held on a namespace, and abort a reservation held on a + * namespace. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_resv_acquire(struct nvme_resv_acquire_args *args); + +/** + * struct nvme_resv_register_args - Arguments for the NVMe Reservation Register command + * @crkey: The current reservation key associated with the host + * @nrkey: The new reservation key to be register if action is register or + * replace + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_resv_register_args + * @fd: File descriptor of nvme device + * @nsid: Namespace identifier + * @rrega: The registration action, see &enum nvme_resv_rrega + * @cptpl: Change persist through power loss, see &enum nvme_resv_cptpl + * @iekey: Set to ignore the existing key + * @timeout: Timeout in ms + */ +struct nvme_resv_register_args { + __u64 crkey; + __u64 nrkey; + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_resv_rrega rrega; + enum nvme_resv_cptpl cptpl; + bool iekey; +}; + +/** + * nvme_resv_register() - Send an nvme reservation register + * @args: &struct nvme_resv_register_args argument structure + * + * The Reservation Register command registers, unregisters, or replaces a + * reservation key. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_resv_register(struct nvme_resv_register_args *args); + +/** + * struct nvme_resv_release_args - Arguments for the NVMe Reservation Release Command + * @crkey: The current reservation key to release + * @result: The command completion result from CQE dword0 + * @args_size: Size of &struct nvme_resv_release_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @rtype: The type of reservation to be create, see &enum nvme_resv_rtype + * @rrela: Reservation releast action, see &enum nvme_resv_rrela + * @iekey: Set to ignore the existing key + */ +struct nvme_resv_release_args { + __u64 crkey; + __u32 *result; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_resv_rtype rtype; + enum nvme_resv_rrela rrela; + bool iekey; +}; + +/** + * nvme_resv_release() - Send an nvme reservation release + * @args: &struct nvme_resv_release_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_resv_release(struct nvme_resv_release_args *args); + +/** + * struct nvme_resv_report_args - Arguments for the NVMe Reservation Report command + * @result: The command completion result from CQE dword0 + * @report: The user space destination address to store the reservation + * report + * @args_size: Size of &struct nvme_resv_report_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace identifier + * @len: Number of bytes to request transfered with this command + * @eds: Request extended Data Structure + */ +struct nvme_resv_report_args { + __u32 *result; + struct nvme_resv_status *report; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 len; + bool eds; +}; + +/** + * nvme_resv_report() - Send an nvme reservation report + * @args: struct nvme_resv_report_args argument structure + * + * Returns a Reservation Status data structure to memory that describes the + * registration and reservation status of a namespace. See the defintion for + * the returned structure, &struct nvme_reservation_status, for more details. + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_resv_report(struct nvme_resv_report_args *args); + +/** + * struct nvme_zns_mgmt_send_args - Arguments for the NVMe ZNS Management Send command + * @slba: Starting logical block address + * @result: The command completion result from CQE dword0 + * @data: Userspace address of the data + * @args_size: Size of &struct nvme_zns_mgmt_send_args + * @fd: File descriptor of nvme device + * @timeout: timeout in ms + * @nsid: Namespace ID + * @zsa: Zone send action + * @data_len: Length of @data + * @select_all: Select all flag + * @zsaso: Zone Send Action Specific Option + */ +struct nvme_zns_mgmt_send_args { + __u64 slba; + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_zns_send_action zsa; + __u32 data_len; + bool select_all; + __u8 zsaso; +}; + +/** + * nvme_zns_mgmt_send() - + * @args: &struct nvme_zns_mgmt_send_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_zns_mgmt_send(struct nvme_zns_mgmt_send_args *args); + + +/** + * struct nvme_zns_mgmt_recv_args - Arguments for the NVMe ZNS Management Receive command + * @slba: Starting logical block address + * @result: The command completion result from CQE dword0 + * @data: Userspace address of the data + * @args_size: Size of &struct nvme_zns_mgmt_recv_args + * @fd: File descriptor of nvme device + * @timeout: timeout in ms + * @nsid: Namespace ID + * @zra: zone receive action + * @data_len: Length of @data + * @zrasf: Zone receive action specific field + * @zras_feat: Zone receive action specific features + */ +struct nvme_zns_mgmt_recv_args { + __u64 slba; + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + enum nvme_zns_recv_action zra; + __u32 data_len; + __u16 zrasf; + bool zras_feat; +}; + +/** + * nvme_zns_mgmt_recv() - + * @args: &struct nvme_zns_mgmt_recv_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_zns_mgmt_recv(struct nvme_zns_mgmt_recv_args *args); + +/** + * nvme_zns_report_zones() - Return the list of zones + * @fd: File descriptor of nvme device + * @nsid: Namespace ID + * @slba: Starting LBA + * @opts: Reporting options + * @extended: Extended report + * @partial: Partial report requested + * @data_len: Length of the data buffer + * @data: Userspace address of the report zones data + * @timeout: timeout in ms + * @result: The command completion result from CQE dword0 + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +static inline int nvme_zns_report_zones(int fd, __u32 nsid, __u64 slba, + enum nvme_zns_report_options opts, + bool extended, bool partial, + __u32 data_len, void *data, + __u32 timeout, __u32 *result) +{ + struct nvme_zns_mgmt_recv_args args = { + .slba = slba, + .result = result, + .data = data, + .args_size = sizeof(args), + .fd = fd, + .timeout = timeout, + .nsid = nsid, + .zra = extended ? NVME_ZNS_ZRA_EXTENDED_REPORT_ZONES : + NVME_ZNS_ZRA_REPORT_ZONES, + .data_len = data_len, + .zrasf = opts, + .zras_feat = partial, + }; + + return nvme_zns_mgmt_recv(&args); +} + +/** + * struct nvme_zns_append_args - Arguments for the NVMe ZNS Append command + * @zslba: Zone start logical block address + * @result: The command completion result from CQE dword0 + * @data: Userspace address of the data + * @metadata: Userspace address of the metadata + * @args_size: Size of &struct nvme_zns_append_args + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @nsid: Namespace ID + * @ilbrt: Initial logical block reference tag + * @data_len: Length of @data + * @metadata_len: Length of @metadata + * @nlb: Number of logical blocks + * @control: + * @lbat: Logical block application tag + * @lbatm: Logical block application tag mask + */ +struct nvme_zns_append_args { + __u64 zslba; + __u64 *result; + void *data; + void *metadata; + int args_size; + int fd; + __u32 timeout; + __u32 nsid; + __u32 ilbrt; + __u32 data_len; + __u32 metadata_len; + __u16 nlb; + __u16 control; + __u16 lbat; + __u16 lbatm; +}; + +/** + * nvme_zns_append() - Append data to a zone + * @args: &struct nvme_zns_append_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_zns_append(struct nvme_zns_append_args *args); + +/** + * struct nvme_dim_args - Arguments for the Discovery Information Management (DIM) command + * @result: Set on completion to the command's CQE DWORD 0 controller response. + * @data: Pointer to the DIM data + * @args_size: Length of the structure + * @fd: File descriptor of nvme device + * @timeout: Timeout in ms + * @data_len: Length of @data + * @tas: Task field of the Command Dword 10 (cdw10) + */ +struct nvme_dim_args { + __u32 *result; + void *data; + int args_size; + int fd; + __u32 timeout; + __u32 data_len; + __u8 tas; +}; + +/** + * nvme_dim_send - Send a Discovery Information Management (DIM) command + * @args: &struct nvme_dim_args argument structure + * + * Return: The nvme command status if a response was received (see + * &enum nvme_status_field) or -1 with errno set otherwise. + */ +int nvme_dim_send(struct nvme_dim_args *args); + +#endif /* _LIBNVME_IOCTL_H */ |