Adding upstream version 1.7~pre1.upstream/1.7_pre1

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

3 files changed, 117 insertions, 82 deletions

diff --git a/doc/lzlib.info b/doc/lzlib.info
index 6814d19..5a32927 100644
--- a/doc/lzlib.info
+++ b/doc/lzlib.info
@@ -11,7 +11,7 @@ File: lzlib.info,  Node: Top,  Next: Introduction,  Up: (dir)
 Lzlib Manual
 ************
 
-This manual is for Lzlib (version 1.6, 27 August 2014).
+This manual is for Lzlib (version 1.7-pre1, 24 February 2015).
 
 * Menu:
 
@@ -29,7 +29,7 @@ This manual is for Lzlib (version 1.6, 27 August 2014).
 * Concept index::               Index of concepts
 
 
-   Copyright (C) 2009-2014 Antonio Diaz Diaz.
+   Copyright (C) 2009-2015 Antonio Diaz Diaz.
 
    This manual is free documentation: you have unlimited permission to
 copy, distribute and modify it.
@@ -45,8 +45,9 @@ and decompression functions, including integrity checking of the
 decompressed data. The compressed data format used by the library is the
 lzip format. Lzlib is written in C.
 
-   The lzip file format is designed for long-term data archiving, taking
-into account both data integrity and decoder availability:
+   The lzip file format is designed for data sharing and long-term
+archiving, taking into account both data integrity and decoder
+availability:
 
    * The lzip format provides very safe integrity checking and some data
      recovery means. The lziprecover program can repair bit-flip errors
@@ -61,8 +62,8 @@ into account both data integrity and decoder availability:
      archaeologist to extract the data from a lzip file long after
      quantum computers eventually render LZMA obsolete.
 
-   * Additionally lzip is copylefted, which guarantees that it will
-     remain free forever.
+   * Additionally the lzip reference implementation is copylefted, which
+     guarantees that it will remain free forever.
 
    A nice feature of the lzip format is that a corrupt byte is easier to
 repair the nearer it is from the beginning of the file. Therefore, with
@@ -75,15 +76,21 @@ library are given in the files 'main.c' and 'bbexample.c' from the
 source distribution.
 
    Compression/decompression is done by repeatedly calling a couple of
-read/write functions until all the data has been processed by the
+read/write functions until all the data have been processed by the
 library. This interface is safer and less error prone than the
 traditional zlib interface.
 
    Compression/decompression is done when the read function is called.
 This means the value returned by the position functions will not be
-updated until some data is read, even if you write a lot of data. If
-you want the data to be compressed in advance, just call the read
-function with a SIZE equal to 0.
+updated until a read call, even if a lot of data is written. If you
+want the data to be compressed in advance, just call the read function
+with a SIZE equal to 0.
+
+   If all the data to be compressed are written in advance, lzlib will
+automatically adjust the header of the compressed data to use the
+smallest possible dictionary size. This feature reduces the amount of
+memory needed for decompression and allows minilzip to produce identical
+compressed output as lzip.
 
    Lzlib will correctly decompress a data stream which is the
 concatenation of two or more compressed data streams. The result is the
@@ -103,9 +110,9 @@ elaborated way of finding coding sequences of minimum price than the one
 currently used by lzip could be developed, and the resulting sequence
 could also be coded using the LZMA coding scheme.
 
-   Lzip currently implements two variants of the LZMA algorithm; fast
-(used by option -0) and normal (used by all other compression levels).
-Lzlib just implements the "normal" variant.
+   Lzlib currently implements two variants of the LZMA algorithm; fast
+(used by option -0 of minilzip) and normal (used by all other
+compression levels).
 
    The high compression of LZMA comes from combining two basic,
 well-proven compression ideas: sliding dictionaries (LZ77/78) and
@@ -147,15 +154,18 @@ File: lzlib.info,  Node: Buffering,  Next: Parameter limits,  Prev: Library vers
 
 Lzlib internal functions need access to a memory chunk at least as large
 as the dictionary size (sliding window). For efficiency reasons, the
-input buffer for compression is twice as large as the dictionary size.
-Finally, for safety reasons, lzlib uses two more internal buffers.
+input buffer for compression is twice or sixteen times as large as the
+dictionary size.
+
+   Finally, for safety reasons, lzlib uses two more internal buffers.
 
    These are the four buffers used by lzlib, and their guaranteed
 minimum sizes:
 
    * Input compression buffer. Written to by the 'LZ_compress_write'
-     function. Its size is two times the dictionary size set with the
-     'LZ_compress_open' function or 64 KiB, whichever is larger.
+     function. For the normal variant of LZMA, its size is two times
+     the dictionary size set with the 'LZ_compress_open' function or 64
+     KiB, whichever is larger. For the fast variant, its size is 1 MiB.
 
    * Output compression buffer. Read from by the 'LZ_compress_read'
      function. Its size is 64 KiB.
@@ -230,6 +240,11 @@ calling 'LZ_compress_errno' before using it.
      range from 5 to 273. Larger values usually give better compression
      ratios but longer compression times.
 
+     If DICTIONARY_SIZE is 65535 and MATCH_LEN_LIMIT is 16, the fast
+     variant of LZMA is chosen, which produces identical compressed
+     output as 'lzip -0'. (The DICTIONARY_SIZE used will be rounded
+     upwards to 64 KiB).
+
      MEMBER_SIZE sets the member size limit in bytes. Minimum member
      size limit is 100 kB. Small member size may degrade compression
      ratio, so use it only when needed. To produce a single-member data
@@ -246,8 +261,8 @@ calling 'LZ_compress_errno' before using it.
  -- Function: int LZ_compress_finish ( struct LZ_Encoder * const
           ENCODER )
      Use this function to tell 'lzlib' that all the data for this member
-     has already been written (with the 'LZ_compress_write' function).
-     After all the produced compressed data has been read with
+     have already been written (with the 'LZ_compress_write' function).
+     After all the produced compressed data have been read with
      'LZ_compress_read' and 'LZ_compress_member_finished' returns 1, a
      new member can be started with 'LZ_compress_restart_member'.
 
@@ -262,9 +277,8 @@ calling 'LZ_compress_errno' before using it.
           ENCODER )
      Use this function to make available to 'LZ_compress_read' all the
      data already written with the 'LZ_compress_write' function. First
-     call 'LZ_compress_read' until it returns 0. Then call
-     'LZ_compress_sync_flush'. Finally, call 'LZ_compress_read' again
-     to read the remaining data.
+     call 'LZ_compress_sync_flush'. Then call 'LZ_compress_read' until
+     it returns 0.
 
      Repeated use of 'LZ_compress_sync_flush' may degrade compression
      ratio, so use it only when needed.
@@ -304,8 +318,8 @@ calling 'LZ_compress_errno' before using it.
 
  -- Function: int LZ_compress_finished ( struct LZ_Encoder * const
           ENCODER )
-     Returns 1 if all the data has been read and 'LZ_compress_close' can
-     be safely called. Otherwise it returns 0.
+     Returns 1 if all the data have been read and 'LZ_compress_close'
+     can be safely called. Otherwise it returns 0.
 
  -- Function: int LZ_compress_member_finished ( struct LZ_Encoder *
           const ENCODER )
@@ -364,7 +378,8 @@ verified by calling 'LZ_decompress_errno' before using it.
  -- Function: int LZ_decompress_finish ( struct LZ_Decoder * const
           DECODER )
      Use this function to tell 'lzlib' that all the data for this stream
-     has already been written (with the 'LZ_decompress_write' function).
+     have already been written (with the 'LZ_decompress_write'
+     function).
 
  -- Function: int LZ_decompress_reset ( struct LZ_Decoder * const
           DECODER )
@@ -420,7 +435,7 @@ verified by calling 'LZ_decompress_errno' before using it.
 
  -- Function: int LZ_decompress_finished ( struct LZ_Decoder * const
           DECODER )
-     Returns 1 if all the data has been read and 'LZ_decompress_close'
+     Returns 1 if all the data have been read and 'LZ_decompress_close'
      can be safely called. Otherwise it returns 0.
 
  -- Function: int LZ_decompress_member_finished ( struct LZ_Decoder *
@@ -589,8 +604,8 @@ with no additional information before, between, or after them.
 
 'Lzma stream'
      The lzma stream, finished by an end of stream marker. Uses default
-     values for encoder properties. See the lzip manual for a full
-     description.
+     values for encoder properties.  *Note Stream format: (lzip)Stream
+     format, for a complete description.
      Lzip only uses the LZMA marker '2' ("End Of Stream" marker). Lzlib
      also uses the LZMA marker '3' ("Sync Flush" marker).
 
@@ -630,7 +645,7 @@ Example 1: Normal compression (MEMBER_SIZE > total output).
      1) LZ_compress_open
      2) LZ_compress_write
      3) LZ_compress_read
-     4) go back to step 2 until all input data has been written
+     4) go back to step 2 until all input data have been written
      5) LZ_compress_finish
      6) LZ_compress_read
      7) go back to step 6 until LZ_compress_finished returns 1
@@ -653,7 +668,7 @@ Example 3: Decompression.
      1) LZ_decompress_open
      2) LZ_decompress_write
      3) LZ_decompress_read
-     4) go back to step 2 until all input data has been written
+     4) go back to step 2 until all input data have been written
      5) LZ_decompress_finish
      6) LZ_decompress_read
      7) go back to step 6 until LZ_decompress_finished returns 1
@@ -697,7 +712,7 @@ Example 6: Multi-member compression (user-restarted members).
       6) LZ_compress_read
       7) go back to step 6 until LZ_compress_member_finished returns 1
       8) verify that LZ_compress_finished returns 1
-      9) go to step 12 if all input data has been written
+      9) go to step 12 if all input data have been written
      10) LZ_compress_restart_member
      11) go back to step 2
      12) LZ_compress_close
@@ -770,18 +785,18 @@ Concept index
 
 Tag Table:
 Node: Top220
-Node: Introduction1304
-Node: Library version5487
-Node: Buffering6132
-Node: Parameter limits7253
-Node: Compression functions8212
-Node: Decompression functions14594
-Node: Error codes20755
-Node: Error messages22694
-Node: Data format23273
-Node: Examples25922
-Node: Problems30005
-Node: Concept index30577
+Node: Introduction1311
+Node: Library version5808
+Node: Buffering6453
+Node: Parameter limits7673
+Node: Compression functions8632
+Node: Decompression functions15176
+Node: Error codes21344
+Node: Error messages23283
+Node: Data format23862
+Node: Examples26538
+Node: Problems30624
+Node: Concept index31196
 
 End Tag Table
 
diff --git a/doc/lzlib.texi b/doc/lzlib.texi
index 1a9d9b6..417cc7b 100644
--- a/doc/lzlib.texi
+++ b/doc/lzlib.texi
@@ -6,8 +6,8 @@
 @finalout
 @c %**end of header
 
-@set UPDATED 27 August 2014
-@set VERSION 1.6
+@set UPDATED 24 February 2015
+@set VERSION 1.7-pre1
 
 @dircategory Data Compression
 @direntry
@@ -50,7 +50,7 @@ This manual is for Lzlib (version @value{VERSION}, @value{UPDATED}).
 @end menu
 
 @sp 1
-Copyright @copyright{} 2009-2014 Antonio Diaz Diaz.
+Copyright @copyright{} 2009-2015 Antonio Diaz Diaz.
 
 This manual is free documentation: you have unlimited permission
 to copy, distribute and modify it.
@@ -65,8 +65,9 @@ and decompression functions, including integrity checking of the
 decompressed data. The compressed data format used by the library is the
 lzip format. Lzlib is written in C.
 
-The lzip file format is designed for long-term data archiving, taking
-into account both data integrity and decoder availability:
+The lzip file format is designed for data sharing and long-term
+archiving, taking into account both data integrity and decoder
+availability:
 
 @itemize @bullet
 @item
@@ -85,8 +86,8 @@ data from a lzip file long after quantum computers eventually render
 LZMA obsolete.
 
 @item
-Additionally lzip is copylefted, which guarantees that it will remain
-free forever.
+Additionally the lzip reference implementation is copylefted, which
+guarantees that it will remain free forever.
 @end itemize
 
 A nice feature of the lzip format is that a corrupt byte is easier to
@@ -100,16 +101,22 @@ library are given in the files @samp{main.c} and @samp{bbexample.c} from
 the source distribution.
 
 Compression/decompression is done by repeatedly calling a couple of
-read/write functions until all the data has been processed by the
+read/write functions until all the data have been processed by the
 library. This interface is safer and less error prone than the
 traditional zlib interface.
 
 Compression/decompression is done when the read function is called. This
 means the value returned by the position functions will not be updated
-until some data is read, even if you write a lot of data. If you want
-the data to be compressed in advance, just call the read function with a
+until a read call, even if a lot of data is written. If you want the
+data to be compressed in advance, just call the read function with a
 @var{size} equal to 0.
 
+If all the data to be compressed are written in advance, lzlib will
+automatically adjust the header of the compressed data to use the
+smallest possible dictionary size. This feature reduces the amount of
+memory needed for decompression and allows minilzip to produce identical
+compressed output as lzip.
+
 Lzlib will correctly decompress a data stream which is the concatenation
 of two or more compressed data streams. The result is the concatenation
 of the corresponding decompressed data streams. Integrity testing of
@@ -127,9 +134,9 @@ elaborated way of finding coding sequences of minimum price than the one
 currently used by lzip could be developed, and the resulting sequence
 could also be coded using the LZMA coding scheme.
 
-Lzip currently implements two variants of the LZMA algorithm; fast (used
-by option -0) and normal (used by all other compression levels). Lzlib
-just implements the "normal" variant.
+Lzlib currently implements two variants of the LZMA algorithm; fast
+(used by option -0 of minilzip) and normal (used by all other
+compression levels).
 
 The high compression of LZMA comes from combining two basic, well-proven
 compression ideas: sliding dictionaries (LZ77/78) and markov models (the
@@ -173,7 +180,9 @@ if( LZ_version()[0] != LZ_version_string[0] )
 
 Lzlib internal functions need access to a memory chunk at least as large
 as the dictionary size (sliding window). For efficiency reasons, the
-input buffer for compression is twice as large as the dictionary size.
+input buffer for compression is twice or sixteen times as large as the
+dictionary size.
+
 Finally, for safety reasons, lzlib uses two more internal buffers.
 
 These are the four buffers used by lzlib, and their guaranteed minimum
@@ -181,9 +190,10 @@ sizes:
 
 @itemize @bullet
 @item Input compression buffer. Written to by the
-@samp{LZ_compress_write} function. Its size is two times the dictionary
-size set with the @samp{LZ_compress_open} function or 64 KiB, whichever
-is larger.
+@samp{LZ_compress_write} function. For the normal variant of LZMA, its
+size is two times the dictionary size set with the
+@samp{LZ_compress_open} function or 64 KiB, whichever is larger. For the
+fast variant, its size is 1 MiB.
 
 @item Output compression buffer. Read from by the
 @samp{LZ_compress_read} function. Its size is 64 KiB.
@@ -261,6 +271,11 @@ to it.
 range from 5 to 273. Larger values usually give better compression
 ratios but longer compression times.
 
+If @var{dictionary_size} is 65535 and @var{match_len_limit} is 16, the
+fast variant of LZMA is chosen, which produces identical compressed
+output as @code{lzip -0}. (The @var{dictionary_size} used will be
+rounded upwards to 64 KiB).
+
 @var{member_size} sets the member size limit in bytes. Minimum member
 size limit is 100 kB. Small member size may degrade compression ratio, so
 use it only when needed. To produce a single-member data stream, give
@@ -279,8 +294,8 @@ more be used as an argument to any LZ_compress function.
 
 @deftypefun int LZ_compress_finish ( struct LZ_Encoder * const @var{encoder} )
 Use this function to tell @samp{lzlib} that all the data for this member
-has already been written (with the @samp{LZ_compress_write} function).
-After all the produced compressed data has been read with
+have already been written (with the @samp{LZ_compress_write} function).
+After all the produced compressed data have been read with
 @samp{LZ_compress_read} and @samp{LZ_compress_member_finished} returns
 1, a new member can be started with @samp{LZ_compress_restart_member}.
 @end deftypefun
@@ -297,9 +312,8 @@ indicates that the current member has been fully read (with the
 @deftypefun int LZ_compress_sync_flush ( struct LZ_Encoder * const @var{encoder} )
 Use this function to make available to @samp{LZ_compress_read} all the
 data already written with the @samp{LZ_compress_write} function. First
-call @samp{LZ_compress_read} until it returns 0. Then call
-@samp{LZ_compress_sync_flush}. Finally, call @samp{LZ_compress_read}
-again to read the remaining data.
+call @samp{LZ_compress_sync_flush}. Then call @samp{LZ_compress_read}
+until it returns 0.
 
 Repeated use of @samp{LZ_compress_sync_flush} may degrade compression
 ratio, so use it only when needed.
@@ -345,8 +359,8 @@ Returns the current error code for @var{encoder} (@pxref{Error codes}).
 
 
 @deftypefun int LZ_compress_finished ( struct LZ_Encoder * const @var{encoder} )
-Returns 1 if all the data has been read and @samp{LZ_compress_close} can
-be safely called. Otherwise it returns 0.
+Returns 1 if all the data have been read and @samp{LZ_compress_close}
+can be safely called. Otherwise it returns 0.
 @end deftypefun
 
 
@@ -414,7 +428,7 @@ more be used as an argument to any LZ_decompress function.
 
 @deftypefun int LZ_decompress_finish ( struct LZ_Decoder * const @var{decoder} )
 Use this function to tell @samp{lzlib} that all the data for this stream
-has already been written (with the @samp{LZ_decompress_write} function).
+have already been written (with the @samp{LZ_decompress_write} function).
 @end deftypefun
 
 
@@ -478,7 +492,7 @@ Returns the current error code for @var{decoder} (@pxref{Error codes}).
 
 
 @deftypefun int LZ_decompress_finished ( struct LZ_Decoder * const @var{decoder} )
-Returns 1 if all the data has been read and @samp{LZ_decompress_close}
+Returns 1 if all the data have been read and @samp{LZ_decompress_close}
 can be safely called. Otherwise it returns 0.
 @end deftypefun
 
@@ -665,8 +679,15 @@ Valid values for dictionary size range from 4 KiB to 512 MiB.
 
 @item Lzma stream
 The lzma stream, finished by an end of stream marker. Uses default
-values for encoder properties. See the lzip manual for a full
-description.@*
+values for encoder properties.
+@ifnothtml
+@xref{Stream format,,,lzip},
+@end ifnothtml
+@ifhtml
+See
+@uref{http://www.nongnu.org/lzip/manual/lzip_manual.html#Stream-format,,Stream format}
+@end ifhtml
+for a complete description.@*
 Lzip only uses the LZMA marker @samp{2} ("End Of Stream" marker). Lzlib
 also uses the LZMA marker @samp{3} ("Sync Flush" marker).
 
@@ -706,7 +727,7 @@ Example 1: Normal compression (@var{member_size} > total output).
 1) LZ_compress_open
 2) LZ_compress_write
 3) LZ_compress_read
-4) go back to step 2 until all input data has been written
+4) go back to step 2 until all input data have been written
 5) LZ_compress_finish
 6) LZ_compress_read
 7) go back to step 6 until LZ_compress_finished returns 1
@@ -735,7 +756,7 @@ Example 3: Decompression.
 1) LZ_decompress_open
 2) LZ_decompress_write
 3) LZ_decompress_read
-4) go back to step 2 until all input data has been written
+4) go back to step 2 until all input data have been written
 5) LZ_decompress_finish
 6) LZ_decompress_read
 7) go back to step 6 until LZ_decompress_finished returns 1
@@ -788,7 +809,7 @@ Example 6: Multi-member compression (user-restarted members).
  6) LZ_compress_read
  7) go back to step 6 until LZ_compress_member_finished returns 1
  8) verify that LZ_compress_finished returns 1
- 9) go to step 12 if all input data has been written
+ 9) go to step 12 if all input data have been written
 10) LZ_compress_restart_member
 11) go back to step 2
 12) LZ_compress_close
@@ -838,7 +859,7 @@ for all eternity, if not longer.
 
 If you find a bug in Lzlib, please send electronic mail to
 @email{lzip-bug@@nongnu.org}. Include the version number, which you can
-find by running @w{@samp{minilzip --version}} or in
+find by running @w{@code{minilzip --version}} or in
 @samp{LZ_version_string} from @samp{lzlib.h}.
 
 
diff --git a/doc/minilzip.1 b/doc/minilzip.1
index 93ee47f..ba63b8c 100644
--- a/doc/minilzip.1
+++ b/doc/minilzip.1
@@ -1,5 +1,5 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.1.
-.TH MINILZIP "1" "August 2014" "minilzip 1.6" "User Commands"
+.TH MINILZIP "1" "February 2015" "minilzip 1.7-pre1" "User Commands"
 .SH NAME
 minilzip \- reduces the size of files
 .SH SYNOPSIS
@@ -54,11 +54,11 @@ test compressed file integrity
 \fB\-v\fR, \fB\-\-verbose\fR
 be verbose (a 2nd \fB\-v\fR gives more)
 .TP
-\fB\-1\fR .. \fB\-9\fR
+\fB\-0\fR .. \fB\-9\fR
 set compression level [default 6]
 .TP
 \fB\-\-fast\fR
-alias for \fB\-1\fR
+alias for \fB\-0\fR
 .TP
 \fB\-\-best\fR
 alias for \fB\-9\fR
@@ -70,8 +70,7 @@ Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
 The bidimensional parameter space of LZMA can't be mapped to a linear
 scale optimal for all files. If your files are large, very repetitive,
 etc, you may need to use the \fB\-\-match\-length\fR and \fB\-\-dictionary\-size\fR
-options directly to achieve optimal performance. For example, \fB\-9m64\fR
-usually compresses executables more (and faster) than \fB\-9\fR.
+options directly to achieve optimal performance.
 .PP
 Exit status: 0 for a normal exit, 1 for environmental problems (file
 not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
@@ -82,8 +81,8 @@ Report bugs to lzip\-bug@nongnu.org
 .br
 Lzlib home page: http://www.nongnu.org/lzip/lzlib.html
 .SH COPYRIGHT
-Copyright \(co 2014 Antonio Diaz Diaz.
-Using lzlib 1.6
+Copyright \(co 2015 Antonio Diaz Diaz.
+Using lzlib 1.7\-pre1
 License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
 .br
 This is free software: you are free to change and redistribute it.