summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--ChangeLog14
-rw-r--r--INSTALL14
-rw-r--r--Makefile.in21
-rw-r--r--NEWS22
-rw-r--r--README2
-rwxr-xr-xconfigure13
-rw-r--r--decoder.c10
-rw-r--r--doc/lzlib.info52
-rw-r--r--doc/lzlib.texi10
-rw-r--r--doc/minilzip.18
-rw-r--r--encoder_base.c10
-rw-r--r--lzlib.h4
-rw-r--r--minilzip.c10
13 files changed, 107 insertions, 83 deletions
diff --git a/ChangeLog b/ChangeLog
index f178fe7..a945949 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,12 @@
+2024-04-19 Antonio Diaz Diaz <antonio@gnu.org>
+
+ * Version 1.15-pre1 released.
+ * Makefile.in: New target 'lib' which builds just the library.
+ New target 'bin' which builds the library and minilzip.
+ 'lib' is now the default; minilzip is no longer built by default.
+ 'install-bin' installs minilzip and its man page again.
+ * INSTALL: Document use of 'make bin'.
+
2024-01-20 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.14 released.
@@ -261,6 +270,5 @@
Copyright (C) 2009-2024 Antonio Diaz Diaz.
-This file is a collection of facts, and thus it is not copyrightable,
-but just in case, you have unlimited permission to copy, distribute, and
-modify it.
+This file is a collection of facts, and thus it is not copyrightable, but just
+in case, you have unlimited permission to copy, distribute, and modify it.
diff --git a/INSTALL b/INSTALL
index 275b69b..570247e 100644
--- a/INSTALL
+++ b/INSTALL
@@ -35,10 +35,16 @@ extracted from the archive.
./configure CFLAGS+='-D __USE_MINGW_ANSI_STDIO'
-3. Run make.
+3. Run make
make
+to build the library, or
+
+ make bin
+
+to build also minilzip.
+
4. Optionally, type 'make check' to run the tests that come with lzlib.
5. Type 'make install' to install the library and any data files and
@@ -52,9 +58,9 @@ extracted from the archive.
You can install only the library or the info manual by typing
'make install-lib' or 'make install-info' respectively.
- 'make install-bin install-man' installs the program minilzip and its man
- page. 'install-bin' installs a shared minilzip if the shared library has
- been configured. Else it installs a static minilzip.
+ 'make install-bin' installs the program minilzip and its man page. It
+ installs a shared minilzip if the shared library has been configured.
+ Else it installs a static minilzip.
'make install-bin-compress' additionally compresses the man page after
installation.
diff --git a/Makefile.in b/Makefile.in
index de54626..cf90c91 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -20,7 +20,9 @@ objs = carg_parser.o minilzip.o
uninstall uninstall-bin uninstall-lib uninstall-info uninstall-man \
doc info man check dist clean distclean
-all : $(progname_static) $(progname_shared)
+all : lib
+
+lib : $(libname_static) $(libname_shared)
lib$(libname).a : lzlib.o
$(AR) $(ARFLAGS) $@ $<
@@ -28,6 +30,8 @@ lib$(libname).a : lzlib.o
lib$(libname).so.$(pkgversion) : lzlib_sh.o
$(CC) $(CFLAGS) $(LDFLAGS) -fpic -fPIC -shared -Wl,--soname=lib$(libname).so.$(soversion) -o $@ $<
+bin : $(progname_static) $(progname_shared)
+
$(progname) : $(objs) lib$(libname).a
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(objs) lib$(libname).a
@@ -54,7 +58,8 @@ lzlib_sh.o : lzlib.c
# prevent 'make' from trying to remake source files
$(VPATH)/configure $(VPATH)/Makefile.in $(VPATH)/doc/$(pkgname).texi : ;
-%.h %.c : ;
+MAKEFLAGS += -r
+.SUFFIXES :
lzdeps = lzlib.h lzip.h cbuffer.c decoder.h decoder.c encoder_base.h \
encoder_base.c encoder.h encoder.c fast_encoder.h fast_encoder.c
@@ -93,21 +98,21 @@ install-strip-compress : install-lib-strip install-info-compress
install-bin-compress : install-bin install-man-compress
install-bin-strip-compress : install-bin-strip install-man-compress
-install-bin : all
+install-bin : bin install-man
if [ ! -d "$(DESTDIR)$(bindir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ; fi
$(INSTALL_PROGRAM) ./$(progname_lzip) "$(DESTDIR)$(bindir)/$(progname)"
-install-bin-strip : all
+install-bin-strip : bin
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install-bin
-install-lib : all
+install-lib : lib
if [ ! -d "$(DESTDIR)$(includedir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(includedir)" ; fi
if [ ! -d "$(DESTDIR)$(libdir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(libdir)" ; fi
$(INSTALL_DATA) $(VPATH)/$(libname)lib.h "$(DESTDIR)$(includedir)/$(libname)lib.h"
- if [ -n "$(progname_static)" ] ; then \
+ if [ -n "$(libname_static)" ] ; then \
$(INSTALL_DATA) ./lib$(libname).a "$(DESTDIR)$(libdir)/lib$(libname).a" ; \
fi
- if [ -n "$(progname_shared)" ] ; then \
+ if [ -n "$(libname_shared)" ] ; then \
$(INSTALL_PROGRAM) ./lib$(libname).so.$(pkgversion) "$(DESTDIR)$(libdir)/lib$(libname).so.$(pkgversion)" ; \
if [ -e "$(DESTDIR)$(libdir)/lib$(libname).so.$(soversion)" ] ; then \
run_ldconfig=no ; \
@@ -121,7 +126,7 @@ install-lib : all
[ -x "$(LDCONFIG)" ] ; then "$(LDCONFIG)" -n "$(DESTDIR)$(libdir)" || true ; fi ; \
fi
-install-lib-strip : all
+install-lib-strip : lib
$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install-lib
install-info :
diff --git a/NEWS b/NEWS
index 101b35a..94f6a9a 100644
--- a/NEWS
+++ b/NEWS
@@ -1,19 +1,11 @@
-Changes in version 1.14:
+Changes in version 1.15:
-In minilzip, file diagnostics have been reformatted as 'PROGRAM: FILE: MESSAGE'.
+The targets 'lib' and 'bin' have been added to Makefile.in. 'lib' is the new
+default and builds just the library. 'bin' builds both the library and
+minilzip.
-In minilzip, diagnostics caused by invalid arguments to command-line options
-now show the argument and the name of the option.
+minilzip is no longer built by default.
-The option '-o, --output' of minilzip now preserves dates, permissions, and
-ownership of the file, when (de)compressing exactly one file.
+'install-bin' installs minilzip and its man page again.
-It has been documented in the manual that it is the responsibility of the
-program using lzlib to include before 'lzlib.h' some header that declares
-the type 'uint8_t'. (Reported by Michal Górny).
-
-The variable MAKEINFO has been added to configure and Makefile.in.
-
-It has been documented in INSTALL that when choosing a C standard, the POSIX
-features need to be enabled explicitly:
- ./configure CFLAGS+='--std=c99 -D_XOPEN_SOURCE=500'
+The use of the target 'bin' has been documented in INSTALL.
diff --git a/README b/README
index 7dc2950..2207fb5 100644
--- a/README
+++ b/README
@@ -83,7 +83,7 @@ Lzlib currently implements two variants of the LZMA algorithm: fast (used by
option '-0' of minilzip) and normal (used by all other compression levels).
The high compression of LZMA comes from combining two basic, well-proven
-compression ideas: sliding dictionaries (LZ77) and markov models (the thing
+compression ideas: sliding dictionaries (LZ77) and Markov models (the thing
used by every compression algorithm that uses a range encoder or similar
order-0 entropy coder as its last stage) with segregation of contexts
according to what the bits are used for.
diff --git a/configure b/configure
index ec5c149..b24d769 100755
--- a/configure
+++ b/configure
@@ -6,14 +6,16 @@
# to copy, distribute, and modify it.
pkgname=lzlib
-pkgversion=1.14
+pkgversion=1.15-pre1
soversion=1
+libname=lz
+libname_static=lib${libname}.a
+libname_shared=
progname=minilzip
progname_static=${progname}
progname_shared=
progname_lzip=${progname}
disable_ldconfig=
-libname=lz
srctrigger=doc/${pkgname}.texi
# clear some things potentially inherited from environment.
@@ -115,10 +117,13 @@ while [ $# != 0 ] ; do
--mandir=*) mandir=${optarg} ;;
--no-create) no_create=yes ;;
--disable-static)
+ libname_static=
+ libname_shared=lib${libname}.so.${pkgversion}
progname_static=
progname_shared=${progname}_shared
progname_lzip=${progname}_shared ;;
--enable-shared)
+ libname_shared=lib${libname}.so.${pkgversion}
progname_shared=${progname}_shared
progname_lzip=${progname}_shared ;;
--disable-ldconfig) disable_ldconfig=yes ;;
@@ -216,12 +221,14 @@ cat > Makefile << EOF
pkgname = ${pkgname}
pkgversion = ${pkgversion}
soversion = ${soversion}
+libname = ${libname}
+libname_static = ${libname_static}
+libname_shared = ${libname_shared}
progname = ${progname}
progname_static = ${progname_static}
progname_shared = ${progname_shared}
progname_lzip = ${progname_lzip}
disable_ldconfig = ${disable_ldconfig}
-libname = ${libname}
VPATH = ${srcdir}
prefix = ${prefix}
exec_prefix = ${exec_prefix}
diff --git a/decoder.c b/decoder.c
index 6544ec6..d1fbe54 100644
--- a/decoder.c
+++ b/decoder.c
@@ -40,7 +40,7 @@ static int LZd_decode_member( struct LZ_decoder * const d )
{
struct Range_decoder * const rdec = d->rdec;
State * const state = &d->state;
- /* unsigned old_mpos = rdec->member_position; */
+ unsigned old_mpos = rdec->member_position;
if( d->member_finished ) return 0;
if( !Rd_try_reload( rdec ) )
@@ -49,9 +49,9 @@ static int LZd_decode_member( struct LZ_decoder * const d )
while( !Rd_finished( rdec ) )
{
- /* const unsigned mpos = rdec->member_position;
+ const unsigned mpos = rdec->member_position;
if( mpos - old_mpos > rd_min_available_bytes ) return 5;
- old_mpos = mpos; */
+ old_mpos = mpos;
if( !Rd_enough_available_bytes( rdec ) ) /* check unexpected EOF */
{ if( !rdec->at_stream_end ) return 0;
if( Cb_empty( &rdec->cb ) ) break; } /* decode until EOF */
@@ -116,9 +116,9 @@ static int LZd_decode_member( struct LZ_decoder * const d )
if( distance == 0xFFFFFFFFU ) /* marker found */
{
Rd_normalize( rdec );
- /* const unsigned mpos = rdec->member_position;
+ const unsigned mpos = rdec->member_position;
if( mpos - old_mpos > rd_min_available_bytes ) return 5;
- old_mpos = mpos; */
+ old_mpos = mpos;
if( len == min_match_len ) /* End Of Stream marker */
{
d->check_trailer_pending = true;
diff --git a/doc/lzlib.info b/doc/lzlib.info
index 979c477..314c98a 100644
--- a/doc/lzlib.info
+++ b/doc/lzlib.info
@@ -11,7 +11,7 @@ File: lzlib.info, Node: Top, Next: Introduction, Up: (dir)
Lzlib Manual
************
-This manual is for Lzlib (version 1.14, 20 January 2024).
+This manual is for Lzlib (version 1.15-pre1, 19 April 2024).
* Menu:
@@ -127,7 +127,7 @@ using the LZMA coding scheme.
levels).
The high compression of LZMA comes from combining two basic, well-proven
-compression ideas: sliding dictionaries (LZ77) and markov models (the thing
+compression ideas: sliding dictionaries (LZ77) and Markov models (the thing
used by every compression algorithm that uses a range encoder or similar
order-0 entropy coder as its last stage) with segregation of contexts
according to what the bits are used for.
@@ -647,7 +647,9 @@ File: lzlib.info, Node: Invoking minilzip, Next: Data format, Prev: Error mes
*******************
Minilzip is a test program for the compression library lzlib, compatible
-with lzip 1.4 or newer.
+(interoperable) with lzip 1.4 or newer. Minilzip is not intended to be
+installed because lzip has more features, but minilzip is well tested and
+you can use it as your main compressor if so you wish.
Lzip is a lossless data compressor with a user interface similar to the
one of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov
@@ -1305,28 +1307,28 @@ Concept index

Tag Table:
Node: Top215
-Node: Introduction1338
-Node: Library version6778
-Node: Buffering9329
-Node: Parameter limits10554
-Node: Compression functions11508
-Ref: member_size13301
-Ref: sync_flush15063
-Node: Decompression functions19751
-Node: Error codes27308
-Node: Error messages29598
-Node: Invoking minilzip30177
-Node: Data format40595
-Ref: coded-dict-size42041
-Node: Examples43446
-Node: Buffer compression44407
-Node: Buffer decompression45927
-Node: File compression47341
-Node: File decompression48324
-Node: File compression mm49328
-Node: Skipping data errors52357
-Node: Problems53662
-Node: Concept index54223
+Node: Introduction1341
+Node: Library version6781
+Node: Buffering9332
+Node: Parameter limits10557
+Node: Compression functions11511
+Ref: member_size13304
+Ref: sync_flush15066
+Node: Decompression functions19754
+Node: Error codes27311
+Node: Error messages29601
+Node: Invoking minilzip30180
+Node: Data format40774
+Ref: coded-dict-size42220
+Node: Examples43625
+Node: Buffer compression44586
+Node: Buffer decompression46106
+Node: File compression47520
+Node: File decompression48503
+Node: File compression mm49507
+Node: Skipping data errors52536
+Node: Problems53841
+Node: Concept index54402

End Tag Table
diff --git a/doc/lzlib.texi b/doc/lzlib.texi
index 75cb7ba..462c840 100644
--- a/doc/lzlib.texi
+++ b/doc/lzlib.texi
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 20 January 2024
-@set VERSION 1.14
+@set UPDATED 19 April 2024
+@set VERSION 1.15-pre1
@dircategory Compression
@direntry
@@ -158,7 +158,7 @@ Lzlib currently implements two variants of the LZMA algorithm: fast (used by
option @option{-0} of minilzip) and normal (used by all other compression levels).
The high compression of LZMA comes from combining two basic, well-proven
-compression ideas: sliding dictionaries (LZ77) and markov models (the thing
+compression ideas: sliding dictionaries (LZ77) and Markov models (the thing
used by every compression algorithm that uses a range encoder or similar
order-0 entropy coder as its last stage) with segregation of contexts
according to what the bits are used for.
@@ -735,7 +735,9 @@ The value of @var{lz_errno} normally comes from a call to
@cindex options
Minilzip is a test program for the compression library lzlib, compatible
-with lzip 1.4 or newer.
+(interoperable) with lzip 1.4 or newer. Minilzip is not intended to be
+installed because lzip has more features, but minilzip is well tested and
+you can use it as your main compressor if so you wish.
@uref{http://www.nongnu.org/lzip/lzip.html,,Lzip}
is a lossless data compressor with a user interface similar to the one
diff --git a/doc/minilzip.1 b/doc/minilzip.1
index 3532520..22ad101 100644
--- a/doc/minilzip.1
+++ b/doc/minilzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.49.2.
-.TH MINILZIP "1" "January 2024" "minilzip 1.14" "User Commands"
+.TH MINILZIP "1" "April 2024" "minilzip 1.15-pre1" "User Commands"
.SH NAME
minilzip \- reduces the size of files
.SH SYNOPSIS
@@ -7,7 +7,7 @@ minilzip \- reduces the size of files
[\fI\,options\/\fR] [\fI\,files\/\fR]
.SH DESCRIPTION
Minilzip is a test program for the compression library lzlib, compatible
-with lzip 1.4 or newer.
+(interoperable) with lzip 1.4 or newer.
.PP
Lzip is a lossless data compressor with a user interface similar to the one
of gzip or bzip2. Lzip uses a simplified form of the 'Lempel\-Ziv\-Markov
@@ -116,12 +116,12 @@ Report bugs to lzip\-bug@nongnu.org
Lzlib home page: http://www.nongnu.org/lzip/lzlib.html
.SH COPYRIGHT
Copyright \(co 2024 Antonio Diaz Diaz.
-Using lzlib 1.14
-Using LZ_API_VERSION = 1014
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
+Using lzlib 1.15\-pre1
+Using LZ_API_VERSION = 1015
.SH "SEE ALSO"
The full documentation for
.B minilzip
diff --git a/encoder_base.c b/encoder_base.c
index 047f372..d2ed53c 100644
--- a/encoder_base.c
+++ b/encoder_base.c
@@ -126,9 +126,8 @@ static void Mb_reset( struct Matchfinder_base * const mb )
/* End Of Stream marker => (dis == 0xFFFFFFFFU, len == min_match_len) */
static void LZeb_try_full_flush( struct LZ_encoder_base * const eb )
{
- if( eb->member_finished ||
- Cb_free_bytes( &eb->renc.cb ) < max_marker_size + eb->renc.ff_count + Lt_size )
- return;
+ if( eb->member_finished || Cb_free_bytes( &eb->renc.cb ) <
+ max_marker_size + eb->renc.ff_count + Lt_size ) return;
eb->member_finished = true;
const int pos_state = Mb_data_position( &eb->mb ) & pos_state_mask;
const State state = eb->state;
@@ -171,9 +170,8 @@ static void LZeb_reset( struct LZ_encoder_base * const eb,
const unsigned long long max_member_size = 0x0008000000000000ULL; /* 2 PiB */
int i;
Mb_reset( &eb->mb );
- eb->member_size_limit =
- min( max( min_member_size, member_size ), max_member_size ) -
- Lt_size - max_marker_size;
+ eb->member_size_limit = min( max( min_member_size, member_size ),
+ max_member_size ) - Lt_size - max_marker_size;
eb->crc = 0xFFFFFFFFU;
Bm_array_init( eb->bm_literal[0], (1 << literal_context_bits) * 0x300 );
Bm_array_init( eb->bm_match[0], states * pos_states );
diff --git a/lzlib.h b/lzlib.h
index b7357d2..7a52342 100644
--- a/lzlib.h
+++ b/lzlib.h
@@ -24,9 +24,9 @@ extern "C" {
/* LZ_API_VERSION was first defined in lzlib 1.8 to 1.
Since lzlib 1.12, LZ_API_VERSION is defined as (major * 1000 + minor). */
-#define LZ_API_VERSION 1014
+#define LZ_API_VERSION 1015
-static const char * const LZ_version_string = "1.14";
+static const char * const LZ_version_string = "1.15-pre1";
enum LZ_Errno { LZ_ok = 0, LZ_bad_argument, LZ_mem_error,
LZ_sequence_error, LZ_header_error, LZ_unexpected_eof,
diff --git a/minilzip.c b/minilzip.c
index a0a6721..c0e542a 100644
--- a/minilzip.c
+++ b/minilzip.c
@@ -26,7 +26,7 @@
#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
-#include <limits.h> /* SSIZE_MAX */
+#include <limits.h> /* CHAR_BIT, SSIZE_MAX */
#include <signal.h>
#include <stdbool.h>
#include <stdint.h> /* SIZE_MAX */
@@ -117,7 +117,7 @@ static bool delete_output_on_interrupt = false;
static void show_help( void )
{
printf( "Minilzip is a test program for the compression library lzlib, compatible\n"
- "with lzip 1.4 or newer.\n"
+ "(interoperable) with lzip 1.4 or newer.\n"
"\nLzip is a lossless data compressor with a user interface similar to the one\n"
"of gzip or bzip2. Lzip uses a simplified form of the 'Lempel-Ziv-Markov\n"
"chain-Algorithm' (LZMA) stream format to maximize interoperability. The\n"
@@ -196,10 +196,10 @@ static void show_version( void )
{
printf( "%s %s\n", program_name, PROGVERSION );
printf( "Copyright (C) %s Antonio Diaz Diaz.\n", program_year );
- show_lzlib_version();
printf( "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n" );
+ show_lzlib_version();
}
@@ -294,6 +294,9 @@ static void Pp_init( struct Pretty_print * const pp,
if( pp->longest_name == 0 ) pp->longest_name = stdin_name_len;
}
+void Pp_free( struct Pretty_print * const pp )
+ { if( pp->padded_name ) { free( pp->padded_name ); pp->padded_name = 0; } }
+
static void Pp_set_name( struct Pretty_print * const pp,
const char * const filename )
{
@@ -1286,6 +1289,7 @@ int main( const int argc, const char * const argv[] )
program_name, failed_tests,
( failed_tests == 1 ) ? "file" : "files" );
free( output_filename );
+ Pp_free( &pp );
free( filenames );
ap_free( &parser );
return retval;