path: root/doc/lzlib.info

This is lzlib.info, produced by makeinfo version 4.13+ from lzlib.texi.

INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
* Lzlib: (lzlib).               Compression library for the lzip format
END-INFO-DIR-ENTRY


File: lzlib.info,  Node: Top,  Next: Introduction,  Up: (dir)

Lzlib Manual
************

This manual is for Lzlib (version 1.9, 11 April 2017).

* Menu:

* Introduction::                Purpose and features of lzlib
* Library version::             Checking library version
* Buffering::                   Sizes of lzlib's buffers
* Parameter limits::            Min / max values for some parameters
* Compression functions::       Descriptions of the compression functions
* Decompression functions::     Descriptions of the decompression functions
* Error codes::                 Meaning of codes returned by functions
* Error messages::              Error messages corresponding to error codes
* Data format::                 Detailed format of the compressed data
* Examples::                    A small tutorial with examples
* Problems::                    Reporting bugs
* Concept index::               Index of concepts


   Copyright (C) 2009-2017 Antonio Diaz Diaz.

   This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.


File: lzlib.info,  Node: Introduction,  Next: Library version,  Prev: Top,  Up: Top

1 Introduction
**************

Lzlib is a data compression library providing in-memory LZMA compression
and decompression functions, including integrity checking of the
decompressed data. The compressed data format used by the library is the
lzip format. Lzlib is written in C.

   The lzip file format is designed for data sharing and long-term
archiving, taking into account both data integrity and decoder
availability:

   * The lzip format provides very safe integrity checking and some data
     recovery means. The lziprecover program can repair bit-flip errors
     (one of the most common forms of data corruption) in lzip files,
     and provides data recovery capabilities, including error-checked
     merging of damaged copies of a file.  *Note Data safety:
     (lziprecover)Data safety.

   * The lzip format is as simple as possible (but not simpler). The
     lzip manual provides the source code of a simple decompressor
     along with a detailed explanation of how it works, so that with
     the only help of the lzip manual it would be possible for a
     digital archaeologist to extract the data from a lzip file long
     after quantum computers eventually render LZMA obsolete.

   * Additionally the lzip reference implementation is copylefted, which
     guarantees that it will remain free forever.

   A nice feature of the lzip format is that a corrupt byte is easier to
repair the nearer it is from the beginning of the file. Therefore, with
the help of lziprecover, losing an entire archive just because of a
corrupt byte near the beginning is a thing of the past.

   The functions and variables forming the interface of the compression
library are declared in the file 'lzlib.h'. Usage examples of the
library are given in the files 'main.c' and 'bbexample.c' from the
source distribution.

   Compression/decompression is done by repeatedly calling a couple of
read/write functions until all the data have been processed by the
library. This interface is safer and less error prone than the
traditional zlib interface.

   Compression/decompression is done when the read function is called.
This means the value returned by the position functions will not be
updated until a read call, even if a lot of data are written. If you
want the data to be compressed in advance, just call the read function
with a SIZE equal to 0.

   If all the data to be compressed are written in advance, lzlib will
automatically adjust the header of the compressed data to use the
smallest possible dictionary size. This feature reduces the amount of
memory needed for decompression and allows minilzip to produce identical
compressed output as lzip.

   Lzlib will correctly decompress a data stream which is the
concatenation of two or more compressed data streams. The result is the
concatenation of the corresponding decompressed data streams. Integrity
testing of concatenated compressed data streams is also supported.

   All the library functions are thread safe. The library does not
install any signal handler. The decoder checks the consistency of the
compressed data, so the library should never crash even in case of
corrupted input.

   In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is
not a concrete algorithm; it is more like "any algorithm using the LZMA
coding scheme". For example, the option '-0' of lzip uses the scheme in
almost the simplest way possible; issuing the longest match it can
find, or a literal byte if it can't find a match. Inversely, a much
more elaborated way of finding coding sequences of minimum size than
the one currently used by lzip could be developed, and the resulting
sequence could also be coded using the LZMA coding scheme.

   Lzlib currently implements two variants of the LZMA algorithm; fast
(used by option '-0' of minilzip) and normal (used by all other
compression levels).

   The high compression of LZMA comes from combining two basic,
well-proven compression ideas: sliding dictionaries (LZ77/78) and
markov models (the thing used by every compression algorithm that uses
a range encoder or similar order-0 entropy coder as its last stage)
with segregation of contexts according to what the bits are used for.

   The ideas embodied in lzlib are due to (at least) the following
people: Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey
Markov (for the definition of Markov chains), G.N.N. Martin (for the
definition of range encoding), Igor Pavlov (for putting all the above
together in LZMA), and Julian Seward (for bzip2's CLI).

   LANGUAGE NOTE: Uncompressed = not compressed = plain data; it may
never have been compressed. Decompressed is used to refer to data which
have undergone the process of decompression.


File: lzlib.info,  Node: Library version,  Next: Buffering,  Prev: Introduction,  Up: Top

2 Library version
*****************

 -- Function: const char * LZ_version ( void )
     Returns the library version as a string.

 -- Constant: const char * LZ_version_string
     This constant is defined in the header file 'lzlib.h'.

   The application should compare LZ_version and LZ_version_string for
consistency. If the first character differs, the library code actually
used may be incompatible with the 'lzlib.h' header file used by the
application.

     if( LZ_version()[0] != LZ_version_string[0] )
       error( "bad library version" );


File: lzlib.info,  Node: Buffering,  Next: Parameter limits,  Prev: Library version,  Up: Top

3 Buffering
***********

Lzlib internal functions need access to a memory chunk at least as large
as the dictionary size (sliding window). For efficiency reasons, the
input buffer for compression is twice or sixteen times as large as the
dictionary size.

   Finally, for safety reasons, lzlib uses two more internal buffers.

   These are the four buffers used by lzlib, and their guaranteed
minimum sizes:

   * Input compression buffer. Written to by the 'LZ_compress_write'
     function. For the normal variant of LZMA, its size is two times
     the dictionary size set with the 'LZ_compress_open' function or 64
     KiB, whichever is larger. For the fast variant, its size is 1 MiB.

   * Output compression buffer. Read from by the 'LZ_compress_read'
     function. Its size is 64 KiB.

   * Input decompression buffer. Written to by the
     'LZ_decompress_write' function. Its size is 64 KiB.

   * Output decompression buffer. Read from by the 'LZ_decompress_read'
     function. Its size is the dictionary size set in the header of the
     member currently being decompressed or 64 KiB, whichever is larger.


File: lzlib.info,  Node: Parameter limits,  Next: Compression functions,  Prev: Buffering,  Up: Top

4 Parameter limits
******************

These functions provide minimum and maximum values for some parameters.
Current values are shown in square brackets.

 -- Function: int LZ_min_dictionary_bits ( void )
     Returns the base 2 logarithm of the smallest valid dictionary size
     [12].

 -- Function: int LZ_min_dictionary_size ( void )
     Returns the smallest valid dictionary size [4 KiB].

 -- Function: int LZ_max_dictionary_bits ( void )
     Returns the base 2 logarithm of the largest valid dictionary size
     [29].

 -- Function: int LZ_max_dictionary_size ( void )
     Returns the largest valid dictionary size [512 MiB].

 -- Function: int LZ_min_match_len_limit ( void )
     Returns the smallest valid match length limit [5].

 -- Function: int LZ_max_match_len_limit ( void )
     Returns the largest valid match length limit [273].


File: lzlib.info,  Node: Compression functions,  Next: Decompression functions,  Prev: Parameter limits,  Up: Top

5 Compression functions
***********************

These are the functions used to compress data. In case of error, all of
them return -1 or 0, for signed and unsigned return values respectively,
except 'LZ_compress_open' whose return value must be verified by
calling 'LZ_compress_errno' before using it.

 -- Function: struct LZ_Encoder * LZ_compress_open ( const int
          DICTIONARY_SIZE, const int MATCH_LEN_LIMIT, const unsigned
          long long MEMBER_SIZE )
     Initializes the internal stream state for compression and returns a
     pointer that can only be used as the ENCODER argument for the
     other LZ_compress functions, or a null pointer if the encoder
     could not be allocated.

     The returned pointer must be verified by calling
     'LZ_compress_errno' before using it. If 'LZ_compress_errno' does
     not return 'LZ_ok', the returned pointer must not be used and
     should be freed with 'LZ_compress_close' to avoid memory leaks.

     DICTIONARY_SIZE sets the dictionary size to be used, in bytes.
     Valid values range from 4 KiB to 512 MiB. Note that dictionary
     sizes are quantized. If the specified size does not match one of
     the valid sizes, it will be rounded upwards by adding up to
     (DICTIONARY_SIZE / 8) to it.

     MATCH_LEN_LIMIT sets the match length limit in bytes. Valid values
     range from 5 to 273. Larger values usually give better compression
     ratios but longer compression times.

     If DICTIONARY_SIZE is 65535 and MATCH_LEN_LIMIT is 16, the fast
     variant of LZMA is chosen, which produces identical compressed
     output as 'lzip -0'. (The dictionary size used will be rounded
     upwards to 64 KiB).

     MEMBER_SIZE sets the member size limit in bytes. Minimum member
     size limit is 100 kB. Small member size may degrade compression
     ratio, so use it only when needed. To produce a single-member data
     stream, give MEMBER_SIZE a value larger than the amount of data to
     be produced, for example INT64_MAX.

 -- Function: int LZ_compress_close ( struct LZ_Encoder * const ENCODER
          )
     Frees all dynamically allocated data structures for this stream.
     This function discards any unprocessed input and does not flush
     any pending output. After a call to 'LZ_compress_close', ENCODER
     can no longer be used as an argument to any LZ_compress function.

 -- Function: int LZ_compress_finish ( struct LZ_Encoder * const
          ENCODER )
     Use this function to tell 'lzlib' that all the data for this member
     have already been written (with the 'LZ_compress_write' function).
     After all the produced compressed data have been read with
     'LZ_compress_read' and 'LZ_compress_member_finished' returns 1, a
     new member can be started with 'LZ_compress_restart_member'.

 -- Function: int LZ_compress_restart_member ( struct LZ_Encoder *
          const ENCODER, const unsigned long long MEMBER_SIZE )
     Use this function to start a new member in a multimember data
     stream.  Call this function only after
     'LZ_compress_member_finished' indicates that the current member
     has been fully read (with the 'LZ_compress_read' function).

 -- Function: int LZ_compress_sync_flush ( struct LZ_Encoder * const
          ENCODER )
     Use this function to make available to 'LZ_compress_read' all the
     data already written with the 'LZ_compress_write' function. First
     call 'LZ_compress_sync_flush'. Then call 'LZ_compress_read' until
     it returns 0.

     Repeated use of 'LZ_compress_sync_flush' may degrade compression
     ratio, so use it only when needed.

 -- Function: int LZ_compress_read ( struct LZ_Encoder * const ENCODER,
          uint8_t * const BUFFER, const int SIZE )
     The 'LZ_compress_read' function reads up to SIZE bytes from the
     stream pointed to by ENCODER, storing the results in BUFFER.

     The return value is the number of bytes actually read. This might
     be less than SIZE; for example, if there aren't that many bytes
     left in the stream or if more bytes have to be yet written with the
     'LZ_compress_write' function. Note that reading less than SIZE
     bytes is not an error.

 -- Function: int LZ_compress_write ( struct LZ_Encoder * const
          ENCODER, uint8_t * const BUFFER, const int SIZE )
     The 'LZ_compress_write' function writes up to SIZE bytes from
     BUFFER to the stream pointed to by ENCODER.

     The return value is the number of bytes actually written. This
     might be less than SIZE. Note that writing less than SIZE bytes is
     not an error.

 -- Function: int LZ_compress_write_size ( struct LZ_Encoder * const
          ENCODER )
     The 'LZ_compress_write_size' function returns the maximum number of
     bytes that can be immediately written through the
     'LZ_compress_write' function.

     It is guaranteed that an immediate call to 'LZ_compress_write' will
     accept a SIZE up to the returned number of bytes.

 -- Function: enum LZ_Errno LZ_compress_errno ( struct LZ_Encoder *
          const ENCODER )
     Returns the current error code for ENCODER (*note Error codes::).

 -- Function: int LZ_compress_finished ( struct LZ_Encoder * const
          ENCODER )
     Returns 1 if all the data have been read and 'LZ_compress_close'
     can be safely called. Otherwise it returns 0.

 -- Function: int LZ_compress_member_finished ( struct LZ_Encoder *
          const ENCODER )
     Returns 1 if the current member, in a multimember data stream, has
     been fully read and 'LZ_compress_restart_member' can be safely
     called.  Otherwise it returns 0.

 -- Function: unsigned long long LZ_compress_data_position ( struct
          LZ_Encoder * const ENCODER )
     Returns the number of input bytes already compressed in the current
     member.

 -- Function: unsigned long long LZ_compress_member_position ( struct
          LZ_Encoder * const ENCODER )
     Returns the number of compressed bytes already produced, but
     perhaps not yet read, in the current member.

 -- Function: unsigned long long LZ_compress_total_in_size ( struct
          LZ_Encoder * const ENCODER )
     Returns the total number of input bytes already compressed.

 -- Function: unsigned long long LZ_compress_total_out_size ( struct
          LZ_Encoder * const ENCODER )
     Returns the total number of compressed bytes already produced, but
     perhaps not yet read.


File: lzlib.info,  Node: Decompression functions,  Next: Error codes,  Prev: Compression functions,  Up: Top

6 Decompression functions
*************************

These are the functions used to decompress data. In case of error, all
of them return -1 or 0, for signed and unsigned return values
respectively, except 'LZ_decompress_open' whose return value must be
verified by calling 'LZ_decompress_errno' before using it.

 -- Function: struct LZ_Decoder * LZ_decompress_open ( void )
     Initializes the internal stream state for decompression and
     returns a pointer that can only be used as the DECODER argument
     for the other LZ_decompress functions, or a null pointer if the
     decoder could not be allocated.

     The returned pointer must be verified by calling
     'LZ_decompress_errno' before using it. If 'LZ_decompress_errno'
     does not return 'LZ_ok', the returned pointer must not be used and
     should be freed with 'LZ_decompress_close' to avoid memory leaks.

 -- Function: int LZ_decompress_close ( struct LZ_Decoder * const
          DECODER )
     Frees all dynamically allocated data structures for this stream.
     This function discards any unprocessed input and does not flush
     any pending output. After a call to 'LZ_decompress_close', DECODER
     can no longer be used as an argument to any LZ_decompress function.

 -- Function: int LZ_decompress_finish ( struct LZ_Decoder * const
          DECODER )
     Use this function to tell 'lzlib' that all the data for this stream
     have already been written (with the 'LZ_decompress_write'
     function).

 -- Function: int LZ_decompress_reset ( struct LZ_Decoder * const
          DECODER )
     Resets the internal state of DECODER as it was just after opening
     it with the 'LZ_decompress_open' function. Data stored in the
     internal buffers is discarded. Position counters are set to 0.

 -- Function: int LZ_decompress_sync_to_member ( struct LZ_Decoder *
          const DECODER )
     Resets the error state of DECODER and enters a search state that
     lasts until a new member header (or the end of the stream) is
     found.  After a successful call to 'LZ_decompress_sync_to_member',
     data written with 'LZ_decompress_write' will be consumed and
     'LZ_decompress_read' will return 0 until a header is found.

     This function is useful to discard any data preceding the first
     member, or to discard the rest of the current member, for example
     in case of a data error. If the decoder is already at the
     beginning of a member, this function does nothing.

 -- Function: int LZ_decompress_read ( struct LZ_Decoder * const
          DECODER, uint8_t * const BUFFER, const int SIZE )
     The 'LZ_decompress_read' function reads up to SIZE bytes from the
     stream pointed to by DECODER, storing the results in BUFFER.

     The return value is the number of bytes actually read. This might
     be less than SIZE; for example, if there aren't that many bytes
     left in the stream or if more bytes have to be yet written with the
     'LZ_decompress_write' function. Note that reading less than SIZE
     bytes is not an error.

 -- Function: int LZ_decompress_write ( struct LZ_Decoder * const
          DECODER, uint8_t * const BUFFER, const int SIZE )
     The 'LZ_decompress_write' function writes up to SIZE bytes from
     BUFFER to the stream pointed to by DECODER.

     The return value is the number of bytes actually written. This
     might be less than SIZE. Note that writing less than SIZE bytes is
     not an error.

 -- Function: int LZ_decompress_write_size ( struct LZ_Decoder * const
          DECODER )
     The 'LZ_decompress_write_size' function returns the maximum number
     of bytes that can be immediately written through the
     'LZ_decompress_write' function.

     It is guaranteed that an immediate call to 'LZ_decompress_write'
     will accept a SIZE up to the returned number of bytes.

 -- Function: enum LZ_Errno LZ_decompress_errno ( struct LZ_Decoder *
          const DECODER )
     Returns the current error code for DECODER (*note Error codes::).

 -- Function: int LZ_decompress_finished ( struct LZ_Decoder * const
          DECODER )
     Returns 1 if all the data have been read and 'LZ_decompress_close'
     can be safely called. Otherwise it returns 0.

 -- Function: int LZ_decompress_member_finished ( struct LZ_Decoder *
          const DECODER )
     Returns 1 if the previous call to 'LZ_decompress_read' finished
     reading the current member, indicating that final values for
     member are available through 'LZ_decompress_data_crc',
     'LZ_decompress_data_position', and
     'LZ_decompress_member_position'. Otherwise it returns 0.

 -- Function: int LZ_decompress_member_version ( struct LZ_Decoder *
          const DECODER )
     Returns the version of current member from member header.

 -- Function: int LZ_decompress_dictionary_size ( struct LZ_Decoder *
          const DECODER )
     Returns the dictionary size of current member from member header.

 -- Function: unsigned LZ_decompress_data_crc ( struct LZ_Decoder *
          const DECODER )
     Returns the 32 bit Cyclic Redundancy Check of the data
     decompressed from the current member. The returned value is valid
     only when 'LZ_decompress_member_finished' returns 1.

 -- Function: unsigned long long LZ_decompress_data_position ( struct
          LZ_Decoder * const DECODER )
     Returns the number of decompressed bytes already produced, but
     perhaps not yet read, in the current member.

 -- Function: unsigned long long LZ_decompress_member_position ( struct
          LZ_Decoder * const DECODER )
     Returns the number of input bytes already decompressed in the
     current member.

 -- Function: unsigned long long LZ_decompress_total_in_size ( struct
          LZ_Decoder * const DECODER )
     Returns the total number of input bytes already decompressed.

 -- Function: unsigned long long LZ_decompress_total_out_size ( struct
          LZ_Decoder * const DECODER )
     Returns the total number of decompressed bytes already produced,
     but perhaps not yet read.


File: lzlib.info,  Node: Error codes,  Next: Error messages,  Prev: Decompression functions,  Up: Top

7 Error codes
*************

Most library functions return -1 to indicate that they have failed. But
this return value only tells you that an error has occurred. To find out
what kind of error it was, you need to verify the error code by calling
'LZ_(de)compress_errno'.

   Library functions don't change the value returned by
'LZ_(de)compress_errno' when they succeed; thus, the value returned by
'LZ_(de)compress_errno' after a successful call is not necessarily
LZ_ok, and you should not use 'LZ_(de)compress_errno' to determine
whether a call failed. If the call failed, then you can examine
'LZ_(de)compress_errno'.

   The error codes are defined in the header file 'lzlib.h'.

 -- Constant: enum LZ_Errno LZ_ok
     The value of this constant is 0 and is used to indicate that there
     is no error.

 -- Constant: enum LZ_Errno LZ_bad_argument
     At least one of the arguments passed to the library function was
     invalid.

 -- Constant: enum LZ_Errno LZ_mem_error
     No memory available. The system cannot allocate more virtual memory
     because its capacity is full.

 -- Constant: enum LZ_Errno LZ_sequence_error
     A library function was called in the wrong order. For example
     'LZ_compress_restart_member' was called before
     'LZ_compress_member_finished' indicates that the current member is
     finished.

 -- Constant: enum LZ_Errno LZ_header_error
     An invalid member header (one with the wrong magic bytes) was
     read. If this happens at the end of the data stream it may
     indicate trailing data.

 -- Constant: enum LZ_Errno LZ_unexpected_eof
     The end of the data stream was reached in the middle of a member.

 -- Constant: enum LZ_Errno LZ_data_error
     The data stream is corrupt.

 -- Constant: enum LZ_Errno LZ_library_error
     A bug was detected in the library. Please, report it (*note
     Problems::).


File: lzlib.info,  Node: Error messages,  Next: Data format,  Prev: Error codes,  Up: Top

8 Error messages
****************

 -- Function: const char * LZ_strerror ( const enum LZ_Errno LZ_ERRNO )
     Returns the standard error message for a given error code. The
     messages are fairly short; there are no multi-line messages or
     embedded newlines.  This function makes it easy for your program
     to report informative error messages about the failure of a
     library call.

     The value of LZ_ERRNO normally comes from a call to
     'LZ_(de)compress_errno'.


File: lzlib.info,  Node: Data format,  Next: Examples,  Prev: Error messages,  Up: Top

9 Data format
*************

Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.
-- Antoine de Saint-Exupery


   In the diagram below, a box like this:
+---+
|   | <-- the vertical bars might be missing
+---+

   represents one byte; a box like this:
+==============+
|              |
+==============+

   represents a variable number of bytes.


   A lzip data stream consists of a series of "members" (compressed data
sets). The members simply appear one after another in the data stream,
with no additional information before, between, or after them.

   Each member has the following structure:
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | LZMA stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   All multibyte values are stored in little endian order.

'ID string (the "magic" bytes)'
     A four byte string, identifying the lzip format, with the value
     "LZIP" (0x4C, 0x5A, 0x49, 0x50).

'VN (version number, 1 byte)'
     Just in case something needs to be modified in the future. 1 for
     now.

'DS (coded dictionary size, 1 byte)'
     The dictionary size is calculated by taking a power of 2 (the base
     size) and substracting from it a fraction between 0/16 and 7/16 of
     the base size.
     Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
     Bits 7-5 contain the numerator of the fraction (0 to 7) to
     substract from the base size to obtain the dictionary size.
     Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
     Valid values for dictionary size range from 4 KiB to 512 MiB.

'LZMA stream'
     The LZMA stream, finished by an end of stream marker. Uses default
     values for encoder properties.  *Note Stream format: (lzip)Stream
     format, for a complete description.
     Lzip only uses the LZMA marker '2' ("End Of Stream" marker). Lzlib
     also uses the LZMA marker '3' ("Sync Flush" marker).

'CRC32 (4 bytes)'
     CRC of the uncompressed original data.

'Data size (8 bytes)'
     Size of the uncompressed original data.

'Member size (8 bytes)'
     Total size of the member, including header and trailer. This field
     acts as a distributed index, allows the verification of stream
     integrity, and facilitates safe recovery of undamaged members from
     multimember files.



File: lzlib.info,  Node: Examples,  Next: Problems,  Prev: Data format,  Up: Top

10 A small tutorial with examples
*********************************

This chapter shows the order in which the library functions should be
called depending on what kind of data stream you want to compress or
decompress. See the file 'bbexample.c' in the source distribution for
an example of how buffer-to-buffer compression/decompression can be
implemented using lzlib.

   Note that lzlib's interface is symmetrical. That is, the code for
normal compression and decompression is identical except because one
calls LZ_compress* functions while the other calls LZ_decompress*
functions.


Example 1: Normal compression (MEMBER_SIZE > total output).

     1) LZ_compress_open
     2) LZ_compress_write
     3) LZ_compress_read
     4) go back to step 2 until all input data have been written
     5) LZ_compress_finish
     6) LZ_compress_read
     7) go back to step 6 until LZ_compress_finished returns 1
     8) LZ_compress_close


Example 2: Normal compression using LZ_compress_write_size.

     1) LZ_compress_open
     2) go to step 5 if LZ_compress_write_size returns 0
     3) LZ_compress_write
     4) if no more data to write, call LZ_compress_finish
     5) LZ_compress_read
     6) go back to step 2 until LZ_compress_finished returns 1
     7) LZ_compress_close


Example 3: Decompression.

     1) LZ_decompress_open
     2) LZ_decompress_write
     3) LZ_decompress_read
     4) go back to step 2 until all input data have been written
     5) LZ_decompress_finish
     6) LZ_decompress_read
     7) go back to step 6 until LZ_decompress_finished returns 1
     8) LZ_decompress_close


Example 4: Decompression using LZ_decompress_write_size.

     1) LZ_decompress_open
     2) go to step 5 if LZ_decompress_write_size returns 0
     3) LZ_decompress_write
     4) if no more data to write, call LZ_decompress_finish
     5) LZ_decompress_read
     5a) optionally, if LZ_decompress_member_finished returns 1, read
         final values for member with LZ_decompress_data_crc, etc.
     6) go back to step 2 until LZ_decompress_finished returns 1
     7) LZ_decompress_close


Example 5: Multimember compression (MEMBER_SIZE < total output).

      1) LZ_compress_open
      2) go to step 5 if LZ_compress_write_size returns 0
      3) LZ_compress_write
      4) if no more data to write, call LZ_compress_finish
      5) LZ_compress_read
      6) go back to step 2 until LZ_compress_member_finished returns 1
      7) go to step 10 if LZ_compress_finished() returns 1
      8) LZ_compress_restart_member
      9) go back to step 2
     10) LZ_compress_close


Example 6: Multimember compression (user-restarted members).

      1) LZ_compress_open
      2) LZ_compress_write
      3) LZ_compress_read
      4) go back to step 2 until member termination is desired
      5) LZ_compress_finish
      6) LZ_compress_read
      7) go back to step 6 until LZ_compress_member_finished returns 1
      8) verify that LZ_compress_finished returns 1
      9) go to step 12 if all input data have been written
     10) LZ_compress_restart_member
     11) go back to step 2
     12) LZ_compress_close


Example 7: Decompression with automatic removal of leading data.

     1) LZ_decompress_open
     2) LZ_decompress_sync_to_member
     3) go to step 6 if LZ_decompress_write_size returns 0
     4) LZ_decompress_write
     5) if no more data to write, call LZ_decompress_finish
     6) LZ_decompress_read
     7) go back to step 3 until LZ_decompress_finished returns 1
     8) LZ_decompress_close


Example 8: Streamed decompression with automatic resynchronization to
next member in case of data error.

     1) LZ_decompress_open
     2) go to step 5 if LZ_decompress_write_size returns 0
     3) LZ_decompress_write
     4) if no more data to write, call LZ_decompress_finish
     5) if LZ_decompress_read produces LZ_header_error or LZ_data_error,
        call LZ_decompress_sync_to_member
     6) go back to step 2 until LZ_decompress_finished returns 1
     7) LZ_decompress_close


File: lzlib.info,  Node: Problems,  Next: Concept index,  Prev: Examples,  Up: Top

11 Reporting bugs
*****************

There are probably bugs in lzlib. There are certainly errors and
omissions in this manual. If you report them, they will get fixed. If
you don't, no one will ever know about them and they will remain unfixed
for all eternity, if not longer.

   If you find a bug in lzlib, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find
by running 'minilzip --version' or in 'LZ_version_string' from
'lzlib.h'.


File: lzlib.info,  Node: Concept index,  Prev: Problems,  Up: Top

Concept index
*************

[index]
* Menu:

* buffering:                             Buffering.             (line 6)
* bugs:                                  Problems.              (line 6)
* compression functions:                 Compression functions. (line 6)
* data format:                           Data format.           (line 6)
* decompression functions:               Decompression functions.
                                                                (line 6)
* error codes:                           Error codes.           (line 6)
* error messages:                        Error messages.        (line 6)
* examples:                              Examples.              (line 6)
* getting help:                          Problems.              (line 6)
* introduction:                          Introduction.          (line 6)
* library version:                       Library version.       (line 6)
* parameter limits:                      Parameter limits.      (line 6)



Tag Table:
Node: Top220
Node: Introduction1303
Node: Library version6115
Node: Buffering6760
Node: Parameter limits7980
Node: Compression functions8939
Node: Decompression functions15481
Node: Error codes21651
Node: Error messages23626
Node: Data format24205
Node: Examples26770
Node: Problems30851
Node: Concept index31423

End Tag Table


Local Variables:
coding: iso-8859-15
End: