Moving scripts to subdirectory in debian tree.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 221 deletions

diff --git a/debian/checkarray b/debian/checkarray
deleted file mode 100755
index 2fb7ee7..0000000
--- a/debian/checkarray
+++ /dev/null
@@ -1,221 +0,0 @@
-#!/bin/sh
-#
-# checkarray -- initiates a check run of an MD array's redundancy information.
-#
-# Copyright © martin f. krafft <madduck@debian.org>
-# distributed under the terms of the Artistic Licence 2.0
-#
-set -eu
-
-PROGNAME=${0##*/}
-
-about()
-{
-  echo "\
-$PROGNAME -- MD array (RAID) redundancy checker tool
-Copyright © martin f. krafft <madduck@debian.org>
-Released under the terms of the Artistic Licence 2.0"
-}
-
-usage()
-{
-  about
-  echo "
-Usage: $PROGNAME [options] [arrays]
-
-Valid options are:
- -a|--all	check all assembled arrays (ignores arrays in command line).
- -s|--status	print redundancy check status of devices.
- -x|--cancel	queue a request to cancel a running redundancy check.
- -r|--repair	repair instead of check
- -i|--idle	perform check in a lowest scheduling class (idle)
- -l|--slow	perform check in a lower-than-standard scheduling class
- -f|--fast	perform check in higher-than-standard scheduling class
- --realtime	perform check in real-time scheduling class (DANGEROUS!)
- -c|--cron	honour AUTOCHECK setting in /etc/default/mdadm.
- -q|--quiet	suppress informational messages
-		(use twice to suppress error messages too).
- -h|--help	show this output.
- -V|--version	show version information.
-
-Examples:
- $PROGNAME --all --idle
- $PROGNAME --quiet /dev/md[123]
- $PROGNAME -sa
- $PROGNAME -x --all
-
-Devices can be specified in almost any format. The following are equivalent:
- /dev/md0, md0, /dev/md/0, /sys/block/md0
-
-You can also control the status of a check/repair with /proc/mdstat file."
-}
-
-SHORTOPTS=achVqQsxrilf
-LONGOPTS=all,cron,help,version,quiet,real-quiet,status,cancel,repair,idle,slow,fast,realtime
-
-eval set -- $(getopt -o $SHORTOPTS -l $LONGOPTS -n $PROGNAME -- "$@")
-
-arrays=''
-cron=0
-all=0
-quiet=0
-status=0
-action=check
-ionice=
-
-for opt in $@; do
-  case "$opt" in
-    -a|--all) all=1;;
-    -s|--status) action=status;;
-    -x|--cancel) action=idle;;
-    -r|--repair) action=repair;;
-    -i|--idle) ionice=idle;;
-    -l|--slow) ionice=low;;
-    -f|--fast) ionice=high;;
-    --realtime) ionice=realtime;;
-    -c|--cron) cron=1;;
-    -q|--quiet) quiet=$(($quiet+1));;
-    -Q|--real-quiet) quiet=$(($quiet+2));;	# for compatibility
-    -h|--help) usage; exit 0;;
-    -V|--version) about; exit 0;;
-    /dev/md/*|md/*) arrays="${arrays:+$arrays }md${opt#*md/}";;
-    /dev/md*|md*) arrays="${arrays:+$arrays }${opt#/dev/}";;
-    /sys/block/md*) arrays="${arrays:+$arrays }${opt#/sys/block/}";;
-    --) :;;
-    *) echo "$PROGNAME: E: invalid option: $opt.  Try --help." >&2; exit 1;;
-  esac
-done
-
-is_true()
-{
-  case "${1:-}" in
-    [Yy]es|[Yy]|1|[Tt]rue|[Tt]) return 0;;
-    *) return 1;
-  esac
-}
-
-DEBIANCONFIG=/etc/default/mdadm
-[ -r $DEBIANCONFIG ] && . $DEBIANCONFIG
-if [ $cron = 1 ] && ! is_true ${AUTOCHECK:-false}; then
-  [ $quiet -lt 1 ] && echo "$PROGNAME: I: disabled in $DEBIANCONFIG ." >&2
-  exit 0
-fi
-
-if [ ! -f /proc/mdstat ]; then
-  [ $quiet -lt 2 ] && echo "$PROGNAME: E: MD subsystem not loaded, or /proc unavailable." >&2
-  exit 2
-fi
-
-if [ ! -d /sys/block ]; then
-  [ $quiet -lt 2 ] && echo "$PROGNAME: E: /sys filesystem not available." >&2
-  exit 7
-fi
-
-if [ -z "$(ls /sys/block/md* 2>/dev/null)" ]; then
-  if [ $quiet -lt 2 ] && [ $cron != 1 ]; then
-    echo "$PROGNAME: W: no active MD arrays found." >&2
-    echo "$PROGNAME: W: (maybe uninstall the mdadm package?)" >&2
-  fi
-  exit 0
-fi
-
-if [ -z "$(ls /sys/block/md*/md/level 2>/dev/null)" ]; then
-  [ $quiet -lt 2 ] && echo "$PROGNAME: E: kernel too old, no support for redundancy checks." >&2
-  exit 6
-fi
-
-if ! egrep -q '^raid([1456]|10)$' /sys/block/md*/md/level 2>/dev/null; then
-  [ $quiet -lt 1 ] && echo "$PROGNAME: I: no redundant arrays present; skipping checks..." >&2
-  exit 0
-fi
-
-if [ -z "$(ls /sys/block/md*/md/sync_action 2>/dev/null)" ]; then
-  [ $quiet -lt 2 ] && echo "$PROGNAME: E: no kernel support for redundancy checks." >&2
-  exit 3
-fi
-
-[ $all = 1 ] && arrays="$(ls -d1 /sys/block/md* | cut -d/ -f4)"
-
-for array in $arrays; do
-  MDBASE=/sys/block/$array/md
-
-  if [ ! -e $MDBASE/sync_action ]; then
-    [ $quiet -lt 1 ] && echo "$PROGNAME: I: skipping non-redundant array $array." >&2
-    continue
-  fi
-
-  cur_status="$(cat $MDBASE/sync_action)"
-
-  if [ $action = status ]; then
-    echo "$array: $cur_status"
-    continue
-  fi
-
-  if [ ! -w $MDBASE/sync_action ]; then
-    [ $quiet -lt 2 ] && echo "$PROGNAME: E: $MDBASE/sync_action not writeable." >&2
-    exit 4
-  fi
-
-  if [ "$(cat $MDBASE/array_state)" = 'read-auto' ]; then
-    [ $quiet -lt 1 ] && echo "$PROGNAME: W: array $array in auto-read-only state, skipping..." >&2
-    continue
-  fi
-
-  case "$action" in
-    idle)
-      echo $action > $MDBASE/sync_action
-      [ $quiet -lt 1 ] && echo "$PROGNAME: I: cancel request queued for array $array." >&2
-      ;;
-
-    check|repair)
-      if [ "$cur_status" != idle ]; then
-        [ $quiet -lt 2 ] && echo "$PROGNAME: W: array $array not idle, skipping..." >&2
-        continue
-      fi
-
-      # check if the array created recently and skip test if it is
-      created=$(mdadm --detail /dev/$array 2>/dev/null |
-                sed -n 's/.*Creation Time *://p' )
-      if [ -n "$created" ]; then
-        created=$(date +%s -d "$created" 2>/dev/null)
-      fi
-      if [ -n "$created" ]; then
-        now=$(date +%s)
-        if [ "$created" -lt "$now" -a \
-             "$created" -gt "$(($now - 14 * 24 * 60 * 60))" ]; then
-          [ $quiet -lt 2 ] && echo "$PROGNAME: I: array $array created recently, skipping..." >&2
-          continue
-        fi
-      fi
-
-      # queue request for the array. The kernel will make sure that these requests
-      # are properly queued so as to not kill one of the arrays.
-      echo $action > $MDBASE/sync_action
-      [ $quiet -lt 1 ] && echo "$PROGNAME: I: $action queued for array $array." >&2
-
-      case "$ionice" in
-        idle) ioarg='-c3'; renice=15;;
-        low) ioarg='-c2 -n7'; renice=5;;
-        high) ioarg='-c2 -n0'; renice=0;;
-        realtime) ioarg='-c1 -n4'; renice=-5;;
-        *) continue;;
-      esac
-
-      resync_pid= wait=5
-      while [ $wait -gt 0 ]; do
-        wait=$((wait - 1))
-        resync_pid=$(ps -ef | awk -v dev=$array 'BEGIN { pattern = "^\\[" dev "_resync]$" } $8 ~ pattern { print $2 }')
-        if [ -n "$resync_pid" ]; then
-          [ $quiet -lt 1 ] && echo "$PROGNAME: I: selecting $ionice I/O scheduling class and $renice niceness for resync of $array." >&2
-          ionice -p "$resync_pid" $ioarg 2>/dev/null || :
-          renice -n $renice -p "$resync_pid" 1>/dev/null 2>&1 || :
-          break
-        fi
-        sleep 1
-      done
-      ;;
-  esac
-
-done
-
-exit 0