Adding upstream version 4.3+20240412.upstream/4.3+20240412

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 65 insertions, 0 deletions

diff --git a/documentation/mdadm.conf-example b/documentation/mdadm.conf-example
new file mode 100644
index 0000000..35a75d1
--- /dev/null
+++ b/documentation/mdadm.conf-example
@@ -0,0 +1,65 @@
+# mdadm configuration file
+#
+# mdadm will function properly without the use of a configuration file,
+# but this file is useful for keeping track of arrays and member disks.
+# In general, a mdadm.conf file is created, and updated, after arrays
+# are created. This is the opposite behavior of /etc/raidtab which is
+# created prior to array construction.
+#
+#
+# the config file takes two types of lines:
+#
+#	DEVICE lines specify a list of devices of where to look for
+#	  potential member disks
+#
+#	ARRAY lines specify information about how to identify arrays so
+#	  so that they can be activated
+#
+# You can have more than one device line and use wild cards. The first
+# example includes SCSI the first partition of SCSI disks /dev/sdb,
+# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second
+# line looks for array slices on IDE disks.
+#
+#DEVICE /dev/sd[bcdjkl]1
+#DEVICE /dev/hda1 /dev/hdb1
+#
+# If you mount devfs on /dev, then a suitable way to list all devices is:
+#DEVICE /dev/discs/*/*
+#
+#
+# The AUTO line can control which arrays get assembled by auto-assembly,
+# meaing either "mdadm -As" when there are no 'ARRAY' lines in this file,
+# or "mdadm --incremental" when the array found is not listed in this file.
+# By default, all arrays that are found are assembled.
+# If you want to ignore all DDF arrays (maybe they are managed by dmraid),
+# and only assemble 1.x arrays if which are marked for 'this' homehost,
+# but assemble all others, then use
+#AUTO -ddf homehost -1.x +all
+#
+# ARRAY lines specify an array to assemble and a method of identification.
+# Arrays can currently be identified by using a UUID, superblock minor number,
+# or a listing of devices.
+#
+#	super-minor is usually the minor number of the metadevice
+#	UUID is the Universally Unique Identifier for the array
+# Each can be obtained using
+#
+# 	mdadm -D <md>
+#
+#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
+#ARRAY /dev/md1 super-minor=1
+#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
+#
+# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
+# will then move a spare between arrays in a spare-group if one array has a failed
+# drive but no spare
+#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
+#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
+#
+# When used in --follow (aka --monitor) mode, mdadm needs a
+# mail address and/or a program.  This can be given with "mailaddr"
+# and "program" lines to that monitoring can be started using
+#    mdadm --follow --scan & echo $! > /run/mdadm/mon.pid
+# If the lines are not found, mdadm will exit quietly
+#MAILADDR root@mydomain.tld
+#PROGRAM /usr/sbin/handle-mdadm-events