Merging upstream version 1.45.3+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 424 insertions, 0 deletions

diff --git a/src/fluent-bit/lib/jemalloc-5.3.0/INSTALL.md b/src/fluent-bit/lib/jemalloc-5.3.0/INSTALL.md
new file mode 100644
index 000000000..90da718d2
--- /dev/null
+++ b/src/fluent-bit/lib/jemalloc-5.3.0/INSTALL.md
@@ -0,0 +1,424 @@
+Building and installing a packaged release of jemalloc can be as simple as
+typing the following while in the root directory of the source tree:
+
+    ./configure
+    make
+    make install
+
+If building from unpackaged developer sources, the simplest command sequence
+that might work is:
+
+    ./autogen.sh
+    make
+    make install
+
+You can uninstall the installed build artifacts like this:
+
+    make uninstall
+
+Notes:
+ - "autoconf" needs to be installed
+ - Documentation is built by the default target only when xsltproc is
+available.  Build will warn but not stop if the dependency is missing.
+
+
+## Advanced configuration
+
+The 'configure' script supports numerous options that allow control of which
+functionality is enabled, where jemalloc is installed, etc.  Optionally, pass
+any of the following arguments (not a definitive list) to 'configure':
+
+* `--help`
+
+    Print a definitive list of options.
+
+* `--prefix=<install-root-dir>`
+
+    Set the base directory in which to install.  For example:
+
+        ./configure --prefix=/usr/local
+
+    will cause files to be installed into /usr/local/include, /usr/local/lib,
+    and /usr/local/man.
+
+* `--with-version=(<major>.<minor>.<bugfix>-<nrev>-g<gid>|VERSION)`
+
+    The VERSION file is mandatory for successful configuration, and the
+    following steps are taken to assure its presence:
+    1) If --with-version=<major>.<minor>.<bugfix>-<nrev>-g<gid> is specified,
+       generate VERSION using the specified value.
+    2) If --with-version is not specified in either form and the source
+       directory is inside a git repository, try to generate VERSION via 'git
+       describe' invocations that pattern-match release tags.
+    3) If VERSION is missing, generate it with a bogus version:
+       0.0.0-0-g0000000000000000000000000000000000000000
+
+    Note that --with-version=VERSION bypasses (1) and (2), which simplifies
+    VERSION configuration when embedding a jemalloc release into another
+    project's git repository.
+
+* `--with-rpath=<colon-separated-rpath>`
+
+    Embed one or more library paths, so that libjemalloc can find the libraries
+    it is linked to.  This works only on ELF-based systems.
+
+* `--with-mangling=<map>`
+
+    Mangle public symbols specified in <map> which is a comma-separated list of
+    name:mangled pairs.
+
+    For example, to use ld's --wrap option as an alternative method for
+    overriding libc's malloc implementation, specify something like:
+
+      --with-mangling=malloc:__wrap_malloc,free:__wrap_free[...]
+
+    Note that mangling happens prior to application of the prefix specified by
+    --with-jemalloc-prefix, and mangled symbols are then ignored when applying
+    the prefix.
+
+* `--with-jemalloc-prefix=<prefix>`
+
+    Prefix all public APIs with <prefix>.  For example, if <prefix> is
+    "prefix_", API changes like the following occur:
+
+      malloc()         --> prefix_malloc()
+      malloc_conf      --> prefix_malloc_conf
+      /etc/malloc.conf --> /etc/prefix_malloc.conf
+      MALLOC_CONF      --> PREFIX_MALLOC_CONF
+
+    This makes it possible to use jemalloc at the same time as the system
+    allocator, or even to use multiple copies of jemalloc simultaneously.
+
+    By default, the prefix is "", except on OS X, where it is "je_".  On OS X,
+    jemalloc overlays the default malloc zone, but makes no attempt to actually
+    replace the "malloc", "calloc", etc. symbols.
+
+* `--without-export`
+
+    Don't export public APIs.  This can be useful when building jemalloc as a
+    static library, or to avoid exporting public APIs when using the zone
+    allocator on OSX.
+
+* `--with-private-namespace=<prefix>`
+
+    Prefix all library-private APIs with <prefix>je_.  For shared libraries,
+    symbol visibility mechanisms prevent these symbols from being exported, but
+    for static libraries, naming collisions are a real possibility.  By
+    default, <prefix> is empty, which results in a symbol prefix of je_ .
+
+* `--with-install-suffix=<suffix>`
+
+    Append <suffix> to the base name of all installed files, such that multiple
+    versions of jemalloc can coexist in the same installation directory.  For
+    example, libjemalloc.so.0 becomes libjemalloc<suffix>.so.0.
+
+* `--with-malloc-conf=<malloc_conf>`
+
+    Embed `<malloc_conf>` as a run-time options string that is processed prior to
+    the malloc_conf global variable, the /etc/malloc.conf symlink, and the
+    MALLOC_CONF environment variable.  For example, to change the default decay
+    time to 30 seconds:
+
+      --with-malloc-conf=decay_ms:30000
+
+* `--enable-debug`
+
+    Enable assertions and validation code.  This incurs a substantial
+    performance hit, but is very useful during application development.
+
+* `--disable-stats`
+
+    Disable statistics gathering functionality.  See the "opt.stats_print"
+    option documentation for usage details.
+
+* `--enable-prof`
+
+    Enable heap profiling and leak detection functionality.  See the "opt.prof"
+    option documentation for usage details.  When enabled, there are several
+    approaches to backtracing, and the configure script chooses the first one
+    in the following list that appears to function correctly:
+
+    + libunwind      (requires --enable-prof-libunwind)
+    + libgcc         (unless --disable-prof-libgcc)
+    + gcc intrinsics (unless --disable-prof-gcc)
+
+* `--enable-prof-libunwind`
+
+    Use the libunwind library (http://www.nongnu.org/libunwind/) for stack
+    backtracing.
+
+* `--disable-prof-libgcc`
+
+    Disable the use of libgcc's backtracing functionality.
+
+* `--disable-prof-gcc`
+
+    Disable the use of gcc intrinsics for backtracing.
+
+* `--with-static-libunwind=<libunwind.a>`
+
+    Statically link against the specified libunwind.a rather than dynamically
+    linking with -lunwind.
+
+* `--disable-fill`
+
+    Disable support for junk/zero filling of memory.  See the "opt.junk" and
+    "opt.zero" option documentation for usage details.
+
+* `--disable-zone-allocator`
+
+    Disable zone allocator for Darwin.  This means jemalloc won't be hooked as
+    the default allocator on OSX/iOS.
+
+* `--enable-utrace`
+
+    Enable utrace(2)-based allocation tracing.  This feature is not broadly
+    portable (FreeBSD has it, but Linux and OS X do not).
+
+* `--enable-xmalloc`
+
+    Enable support for optional immediate termination due to out-of-memory
+    errors, as is commonly implemented by "xmalloc" wrapper function for malloc.
+    See the "opt.xmalloc" option documentation for usage details.
+
+* `--enable-lazy-lock`
+
+    Enable code that wraps pthread_create() to detect when an application
+    switches from single-threaded to multi-threaded mode, so that it can avoid
+    mutex locking/unlocking operations while in single-threaded mode.  In
+    practice, this feature usually has little impact on performance unless
+    thread-specific caching is disabled.
+
+* `--disable-cache-oblivious`
+
+    Disable cache-oblivious large allocation alignment by default, for large
+    allocation requests with no alignment constraints.  If this feature is
+    disabled, all large allocations are page-aligned as an implementation
+    artifact, which can severely harm CPU cache utilization.  However, the
+    cache-oblivious layout comes at the cost of one extra page per large
+    allocation, which in the most extreme case increases physical memory usage
+    for the 16 KiB size class to 20 KiB.
+
+* `--disable-syscall`
+
+    Disable use of syscall(2) rather than {open,read,write,close}(2).  This is
+    intended as a workaround for systems that place security limitations on
+    syscall(2).
+
+* `--disable-cxx`
+
+    Disable C++ integration.  This will cause new and delete operator
+    implementations to be omitted.
+
+* `--with-xslroot=<path>`
+
+    Specify where to find DocBook XSL stylesheets when building the
+    documentation.
+
+* `--with-lg-page=<lg-page>`
+
+    Specify the base 2 log of the allocator page size, which must in turn be at
+    least as large as the system page size.  By default the configure script
+    determines the host's page size and sets the allocator page size equal to
+    the system page size, so this option need not be specified unless the
+    system page size may change between configuration and execution, e.g. when
+    cross compiling.
+
+* `--with-lg-hugepage=<lg-hugepage>`
+
+    Specify the base 2 log of the system huge page size.  This option is useful
+    when cross compiling, or when overriding the default for systems that do
+    not explicitly support huge pages.
+
+* `--with-lg-quantum=<lg-quantum>`
+
+    Specify the base 2 log of the minimum allocation alignment.  jemalloc needs
+    to know the minimum alignment that meets the following C standard
+    requirement (quoted from the April 12, 2011 draft of the C11 standard):
+
+    >  The pointer returned if the allocation succeeds is suitably aligned so
+      that it may be assigned to a pointer to any type of object with a
+      fundamental alignment requirement and then used to access such an object
+      or an array of such objects in the space allocated [...]
+
+    This setting is architecture-specific, and although jemalloc includes known
+    safe values for the most commonly used modern architectures, there is a
+    wrinkle related to GNU libc (glibc) that may impact your choice of
+    <lg-quantum>.  On most modern architectures, this mandates 16-byte
+    alignment (<lg-quantum>=4), but the glibc developers chose not to meet this
+    requirement for performance reasons.  An old discussion can be found at
+    <https://sourceware.org/bugzilla/show_bug.cgi?id=206> .  Unlike glibc,
+    jemalloc does follow the C standard by default (caveat: jemalloc
+    technically cheats for size classes smaller than the quantum), but the fact
+    that Linux systems already work around this allocator noncompliance means
+    that it is generally safe in practice to let jemalloc's minimum alignment
+    follow glibc's lead.  If you specify `--with-lg-quantum=3` during
+    configuration, jemalloc will provide additional size classes that are not
+    16-byte-aligned (24, 40, and 56).
+
+* `--with-lg-vaddr=<lg-vaddr>`
+
+    Specify the number of significant virtual address bits.  By default, the
+    configure script attempts to detect virtual address size on those platforms
+    where it knows how, and picks a default otherwise.  This option may be
+    useful when cross-compiling.
+
+* `--disable-initial-exec-tls`
+
+    Disable the initial-exec TLS model for jemalloc's internal thread-local
+    storage (on those platforms that support explicit settings).  This can allow
+    jemalloc to be dynamically loaded after program startup (e.g. using dlopen).
+    Note that in this case, there will be two malloc implementations operating
+    in the same process, which will almost certainly result in confusing runtime
+    crashes if pointers leak from one implementation to the other.
+
+* `--disable-libdl`
+
+    Disable the usage of libdl, namely dlsym(3) which is required by the lazy
+    lock option.  This can allow building static binaries.
+
+The following environment variables (not a definitive list) impact configure's
+behavior:
+
+* `CFLAGS="?"`
+* `CXXFLAGS="?"`
+
+    Pass these flags to the C/C++ compiler.  Any flags set by the configure
+    script are prepended, which means explicitly set flags generally take
+    precedence.  Take care when specifying flags such as -Werror, because
+    configure tests may be affected in undesirable ways.
+
+* `EXTRA_CFLAGS="?"`
+* `EXTRA_CXXFLAGS="?"`
+
+    Append these flags to CFLAGS/CXXFLAGS, without passing them to the
+    compiler(s) during configuration.  This makes it possible to add flags such
+    as -Werror, while allowing the configure script to determine what other
+    flags are appropriate for the specified configuration.
+
+* `CPPFLAGS="?"`
+
+    Pass these flags to the C preprocessor.  Note that CFLAGS is not passed to
+    'cpp' when 'configure' is looking for include files, so you must use
+    CPPFLAGS instead if you need to help 'configure' find header files.
+
+* `LD_LIBRARY_PATH="?"`
+
+    'ld' uses this colon-separated list to find libraries.
+
+* `LDFLAGS="?"`
+
+    Pass these flags when linking.
+
+* `PATH="?"`
+
+    'configure' uses this to find programs.
+
+In some cases it may be necessary to work around configuration results that do
+not match reality.  For example, Linux 4.5 added support for the MADV_FREE flag
+to madvise(2), which can cause problems if building on a host with MADV_FREE
+support and deploying to a target without.  To work around this, use a cache
+file to override the relevant configuration variable defined in configure.ac,
+e.g.:
+
+    echo "je_cv_madv_free=no" > config.cache && ./configure -C
+
+
+## Advanced compilation
+
+To build only parts of jemalloc, use the following targets:
+
+    build_lib_shared
+    build_lib_static
+    build_lib
+    build_doc_html
+    build_doc_man
+    build_doc
+
+To install only parts of jemalloc, use the following targets:
+
+    install_bin
+    install_include
+    install_lib_shared
+    install_lib_static
+    install_lib_pc
+    install_lib
+    install_doc_html
+    install_doc_man
+    install_doc
+
+To clean up build results to varying degrees, use the following make targets:
+
+    clean
+    distclean
+    relclean
+
+
+## Advanced installation
+
+Optionally, define make variables when invoking make, including (not
+exclusively):
+
+* `INCLUDEDIR="?"`
+
+    Use this as the installation prefix for header files.
+
+* `LIBDIR="?"`
+
+    Use this as the installation prefix for libraries.
+
+* `MANDIR="?"`
+
+    Use this as the installation prefix for man pages.
+
+* `DESTDIR="?"`
+
+    Prepend DESTDIR to INCLUDEDIR, LIBDIR, DATADIR, and MANDIR.  This is useful
+    when installing to a different path than was specified via --prefix.
+
+* `CC="?"`
+
+    Use this to invoke the C compiler.
+
+* `CFLAGS="?"`
+
+    Pass these flags to the compiler.
+
+* `CPPFLAGS="?"`
+
+    Pass these flags to the C preprocessor.
+
+* `LDFLAGS="?"`
+
+    Pass these flags when linking.
+
+* `PATH="?"`
+
+    Use this to search for programs used during configuration and building.
+
+
+## Development
+
+If you intend to make non-trivial changes to jemalloc, use the 'autogen.sh'
+script rather than 'configure'.  This re-generates 'configure', enables
+configuration dependency rules, and enables re-generation of automatically
+generated source files.
+
+The build system supports using an object directory separate from the source
+tree.  For example, you can create an 'obj' directory, and from within that
+directory, issue configuration and build commands:
+
+    autoconf
+    mkdir obj
+    cd obj
+    ../configure --enable-autogen
+    make
+
+
+## Documentation
+
+The manual page is generated in both html and roff formats.  Any web browser
+can be used to view the html manual.  The roff manual page can be formatted
+prior to installation via the following command:
+
+    nroff -man -t doc/jemalloc.3