Merging upstream version 1.46.3.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/src/health/guides/ioping/ioping_disk_latency.md b/src/health/guides/ioping/ioping_disk_latency.md
new file mode 100644
index 000000000..cc4fdc697
--- /dev/null
+++ b/src/health/guides/ioping/ioping_disk_latency.md
@@ -0,0 +1,46 @@
+### Understand the alert
+
+This alert presents the average `I/O latency` over the last 10 seconds. `I/O latency` is the time that is required to complete a single I/O operation on a block device.
+
+This alert might indicate that your disk is under high load, or that the disk is slow.
+
+### Troubleshoot the alert
+
+1. Check per-process I/O usage:
+   
+   Use `iotop` to see the processes that are the main I/O consumers:
+
+   ```
+   sudo iotop
+   ```
+
+   If you don't have `iotop` installed, then [install it](https://www.tecmint.com/iotop-monitor-linux-disk-io-activity-per-process/)
+
+2. Analyze the running processes:
+
+   Investigate the top I/O consumers and determine if these processes are expected to consume that much I/O, or if there might be an issue with these processes.
+
+3. Minimize the load by closing any unnecessary main consumer processes:
+
+   If you find that any unnecessary or unexpected processes are heavily utilizing your disk, try stopping or closing those processes to reduce the load on the disk. Always double-check if the process you want to close is necessary.
+
+4. Verify your disk health:
+
+   Make sure your disk is not facing any hardware issues or failures. For this, you can use the `smartmontools` package, which contains the `smartctl` utility. If it's not installed, you can [install it](https://www.smartmontools.org/wiki/Download).
+
+   To check the disk health, run:
+
+   ```
+   sudo smartctl -a /dev/sdX
+   ```
+
+   Replace `/dev/sdX` with the correct disk device identifier (for example, `/dev/sda`).
+
+5. Consider upgrading your disk:
+
+   If your disk consistently experiences high latency and you have already addressed any performance issues with the running processes, consider upgrading your disk to a faster drive (e.g., replace an HDD with an SSD).
+
+### Useful resources
+
+1. [iotop - Monitor Linux Disk I/O Activity](https://www.tecmint.com/iotop-monitor-linux-disk-io-activity-per-process/)
+2. [smartmontools - SMART monitoring tools](https://www.smartmontools.org/)