diff options
Diffstat (limited to 'collectors/charts.d.plugin')
88 files changed, 7864 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/Makefile.am b/collectors/charts.d.plugin/Makefile.am new file mode 100644 index 000000000..e2e00258f --- /dev/null +++ b/collectors/charts.d.plugin/Makefile.am @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in + +CLEANFILES = \ + charts.d.plugin \ + $(NULL) + +include $(top_srcdir)/build/subst.inc +SUFFIXES = .in + +dist_libconfig_DATA = \ + charts.d.conf \ + $(NULL) + +dist_plugins_SCRIPTS = \ + charts.d.dryrun-helper.sh \ + charts.d.plugin \ + loopsleepms.sh.inc \ + $(NULL) + +dist_noinst_DATA = \ + charts.d.plugin.in \ + README.md \ + $(NULL) + +dist_charts_SCRIPTS = \ + $(NULL) + +dist_charts_DATA = \ + $(NULL) + +userchartsconfigdir=$(configdir)/charts.d +dist_userchartsconfig_DATA = \ + $(top_srcdir)/installer/.keep \ + $(NULL) + +chartsconfigdir=$(libconfigdir)/charts.d +dist_chartsconfig_DATA = \ + $(top_srcdir)/installer/.keep \ + $(NULL) + +include ap/Makefile.inc +include apache/Makefile.inc +include apcupsd/Makefile.inc +include cpu_apps/Makefile.inc +include cpufreq/Makefile.inc +include example/Makefile.inc +include exim/Makefile.inc +include hddtemp/Makefile.inc +include libreswan/Makefile.inc +include load_average/Makefile.inc +include mem_apps/Makefile.inc +include mysql/Makefile.inc +include nginx/Makefile.inc +include nut/Makefile.inc +include opensips/Makefile.inc +include phpfpm/Makefile.inc +include postfix/Makefile.inc +include sensors/Makefile.inc +include squid/Makefile.inc +include tomcat/Makefile.inc diff --git a/collectors/charts.d.plugin/Makefile.in b/collectors/charts.d.plugin/Makefile.in new file mode 100644 index 000000000..23e2edebb --- /dev/null +++ b/collectors/charts.d.plugin/Makefile.in @@ -0,0 +1,953 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SPDX-License-Identifier: GPL-3.0-or-later + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +DIST_COMMON = $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc \ + $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc \ + $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc \ + $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc \ + $(srcdir)/hddtemp/Makefile.inc \ + $(srcdir)/libreswan/Makefile.inc \ + $(srcdir)/load_average/Makefile.inc \ + $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc \ + $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc \ + $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc \ + $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc \ + $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) \ + $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ + $(dist_libconfig_DATA) $(dist_noinst_DATA) \ + $(dist_userchartsconfig_DATA) +subdir = collectors/charts.d.plugin +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \ + $(top_srcdir)/build/m4/ax_c__generic.m4 \ + $(top_srcdir)/build/m4/ax_c_lto.m4 \ + $(top_srcdir)/build/m4/ax_c_mallinfo.m4 \ + $(top_srcdir)/build/m4/ax_c_mallopt.m4 \ + $(top_srcdir)/build/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/build/m4/ax_pthread.m4 \ + $(top_srcdir)/build/m4/jemalloc.m4 \ + $(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" \ + "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" \ + "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)" +SCRIPTS = $(dist_charts_SCRIPTS) $(dist_plugins_SCRIPTS) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +DATA = $(dist_charts_DATA) $(dist_chartsconfig_DATA) \ + $(dist_libconfig_DATA) $(dist_noinst_DATA) \ + $(dist_userchartsconfig_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@ +IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBCAP_CFLAGS = @LIBCAP_CFLAGS@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBMNL_CFLAGS = @LIBMNL_CFLAGS@ +LIBMNL_LIBS = @LIBMNL_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MATH_CFLAGS = @MATH_CFLAGS@ +MATH_LIBS = @MATH_LIBS@ +MKDIR_P = @MKDIR_P@ +NFACCT_CFLAGS = @NFACCT_CFLAGS@ +NFACCT_LIBS = @NFACCT_LIBS@ +OBJEXT = @OBJEXT@ +OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@ +OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@ +OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@ +OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@ +OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@ +OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@ +OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@ +OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@ +OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@ +OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@ +OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@ +OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_RPM_RELEASE = @PACKAGE_RPM_RELEASE@ +PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SSE_CANDIDATE = @SSE_CANDIDATE@ +STRIP = @STRIP@ +UUID_CFLAGS = @UUID_CFLAGS@ +UUID_LIBS = @UUID_LIBS@ +VERSION = @VERSION@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_target = @build_target@ +build_vendor = @build_vendor@ +builddir = @builddir@ +cachedir = @cachedir@ +chartsdir = @chartsdir@ +configdir = @configdir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +has_jemalloc = @has_jemalloc@ +has_tcmalloc = @has_tcmalloc@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libconfigdir = @libconfigdir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +logdir = @logdir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +nodedir = @nodedir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pluginsdir = @pluginsdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pythondir = @pythondir@ +registrydir = @registrydir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +varlibdir = @varlibdir@ +webdir = @webdir@ +MAINTAINERCLEANFILES = $(srcdir)/Makefile.in +CLEANFILES = \ + charts.d.plugin \ + $(NULL) + +SUFFIXES = .in +dist_libconfig_DATA = \ + charts.d.conf \ + $(NULL) + +dist_plugins_SCRIPTS = \ + charts.d.dryrun-helper.sh \ + charts.d.plugin \ + loopsleepms.sh.inc \ + $(NULL) + + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution + +# do not install these files, but include them in the distribution +dist_noinst_DATA = charts.d.plugin.in README.md $(NULL) ap/README.md \ + ap/Makefile.inc apache/README.md apache/Makefile.inc \ + apcupsd/README.md apcupsd/Makefile.inc cpu_apps/README.md \ + cpu_apps/Makefile.inc cpufreq/README.md cpufreq/Makefile.inc \ + example/README.md example/Makefile.inc exim/README.md \ + exim/Makefile.inc hddtemp/README.md hddtemp/Makefile.inc \ + libreswan/README.md libreswan/Makefile.inc \ + load_average/README.md load_average/Makefile.inc \ + mem_apps/README.md mem_apps/Makefile.inc mysql/README.md \ + mysql/Makefile.inc nginx/README.md nginx/Makefile.inc \ + nut/README.md nut/Makefile.inc opensips/README.md \ + opensips/Makefile.inc phpfpm/README.md phpfpm/Makefile.inc \ + postfix/README.md postfix/Makefile.inc sensors/README.md \ + sensors/Makefile.inc squid/README.md squid/Makefile.inc \ + tomcat/README.md tomcat/Makefile.inc +dist_charts_SCRIPTS = \ + $(NULL) + + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files + +# install these files +dist_charts_DATA = $(NULL) ap/ap.chart.sh apache/apache.chart.sh \ + apcupsd/apcupsd.chart.sh cpu_apps/cpu_apps.chart.sh \ + cpufreq/cpufreq.chart.sh example/example.chart.sh \ + exim/exim.chart.sh hddtemp/hddtemp.chart.sh \ + libreswan/libreswan.chart.sh \ + load_average/load_average.chart.sh mem_apps/mem_apps.chart.sh \ + mysql/mysql.chart.sh nginx/nginx.chart.sh nut/nut.chart.sh \ + opensips/opensips.chart.sh phpfpm/phpfpm.chart.sh \ + postfix/postfix.chart.sh sensors/sensors.chart.sh \ + squid/squid.chart.sh tomcat/tomcat.chart.sh +userchartsconfigdir = $(configdir)/charts.d +dist_userchartsconfig_DATA = \ + $(top_srcdir)/installer/.keep \ + $(NULL) + +chartsconfigdir = $(libconfigdir)/charts.d +dist_chartsconfig_DATA = $(top_srcdir)/installer/.keep $(NULL) \ + ap/ap.conf apache/apache.conf apcupsd/apcupsd.conf \ + cpu_apps/cpu_apps.conf cpufreq/cpufreq.conf \ + example/example.conf exim/exim.conf hddtemp/hddtemp.conf \ + libreswan/libreswan.conf load_average/load_average.conf \ + mem_apps/mem_apps.conf mysql/mysql.conf nginx/nginx.conf \ + nut/nut.conf opensips/opensips.conf phpfpm/phpfpm.conf \ + postfix/postfix.conf sensors/sensors.conf squid/squid.conf \ + tomcat/tomcat.conf +all: all-am + +.SUFFIXES: +.SUFFIXES: .in +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu collectors/charts.d.plugin/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; +$(top_srcdir)/build/subst.inc $(srcdir)/ap/Makefile.inc $(srcdir)/apache/Makefile.inc $(srcdir)/apcupsd/Makefile.inc $(srcdir)/cpu_apps/Makefile.inc $(srcdir)/cpufreq/Makefile.inc $(srcdir)/example/Makefile.inc $(srcdir)/exim/Makefile.inc $(srcdir)/hddtemp/Makefile.inc $(srcdir)/libreswan/Makefile.inc $(srcdir)/load_average/Makefile.inc $(srcdir)/mem_apps/Makefile.inc $(srcdir)/mysql/Makefile.inc $(srcdir)/nginx/Makefile.inc $(srcdir)/nut/Makefile.inc $(srcdir)/opensips/Makefile.inc $(srcdir)/phpfpm/Makefile.inc $(srcdir)/postfix/Makefile.inc $(srcdir)/sensors/Makefile.inc $(srcdir)/squid/Makefile.inc $(srcdir)/tomcat/Makefile.inc: + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-dist_chartsSCRIPTS: $(dist_charts_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(chartsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(chartsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_chartsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_charts_SCRIPTS)'; test -n "$(chartsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) +install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS) + @$(NORMAL_INSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n' \ + -e 'h;s|.*|.|' \ + -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) { files[d] = files[d] " " $$1; \ + if (++n[d] == $(am__install_max)) { \ + print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ + else { print "f", d "/" $$4, $$1 } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \ + $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-dist_pluginsSCRIPTS: + @$(NORMAL_UNINSTALL) + @list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 's,.*/,,;$(transform)'`; \ + dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir) +install-dist_chartsDATA: $(dist_charts_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsdir)" || exit $$?; \ + done + +uninstall-dist_chartsDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_charts_DATA)'; test -n "$(chartsdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(chartsdir)'; $(am__uninstall_files_from_dir) +install-dist_chartsconfigDATA: $(dist_chartsconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(chartsconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(chartsconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(chartsconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(chartsconfigdir)" || exit $$?; \ + done + +uninstall-dist_chartsconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_chartsconfig_DATA)'; test -n "$(chartsconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(chartsconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_libconfigDATA: $(dist_libconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \ + done + +uninstall-dist_libconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir) +install-dist_userchartsconfigDATA: $(dist_userchartsconfig_DATA) + @$(NORMAL_INSTALL) + @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(userchartsconfigdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(userchartsconfigdir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userchartsconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(userchartsconfigdir)" || exit $$?; \ + done + +uninstall-dist_userchartsconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_userchartsconfig_DATA)'; test -n "$(userchartsconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(userchartsconfigdir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(SCRIPTS) $(DATA) +installdirs: + for dir in "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(chartsdir)" "$(DESTDIR)$(chartsconfigdir)" "$(DESTDIR)$(libconfigdir)" "$(DESTDIR)$(userchartsconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-dist_chartsDATA install-dist_chartsSCRIPTS \ + install-dist_chartsconfigDATA install-dist_libconfigDATA \ + install-dist_pluginsSCRIPTS install-dist_userchartsconfigDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ + uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ + uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_userchartsconfigDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic cscopelist-am \ + ctags-am distclean distclean-generic distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dist_chartsDATA \ + install-dist_chartsSCRIPTS install-dist_chartsconfigDATA \ + install-dist_libconfigDATA install-dist_pluginsSCRIPTS \ + install-dist_userchartsconfigDATA install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags-am uninstall uninstall-am \ + uninstall-dist_chartsDATA uninstall-dist_chartsSCRIPTS \ + uninstall-dist_chartsconfigDATA uninstall-dist_libconfigDATA \ + uninstall-dist_pluginsSCRIPTS \ + uninstall-dist_userchartsconfigDATA + +.in: + if sed \ + -e 's#[@]localstatedir_POST@#$(localstatedir)#g' \ + -e 's#[@]sbindir_POST@#$(sbindir)#g' \ + -e 's#[@]sysconfdir_POST@#$(sysconfdir)#g' \ + -e 's#[@]pythondir_POST@#$(pythondir)#g' \ + -e 's#[@]configdir_POST@#$(configdir)#g' \ + -e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \ + -e 's#[@]cachedir_POST@#$(cachedir)#g' \ + $< > $@.tmp; then \ + mv "$@.tmp" "$@"; \ + else \ + rm -f "$@.tmp"; \ + false; \ + fi + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/collectors/charts.d.plugin/README.md b/collectors/charts.d.plugin/README.md new file mode 100644 index 000000000..b224bffe3 --- /dev/null +++ b/collectors/charts.d.plugin/README.md @@ -0,0 +1,193 @@ +# charts.d.plugin + +`charts.d.plugin` is a netdata external plugin. It is an **orchestrator** for data collection modules written in `BASH` v4+. + +1. It runs as an independent process `ps fax` shows it +2. It is started and stopped automatically by netdata +3. It communicates with netdata via a unidirectional pipe (sending data to the netdata daemon) +4. Supports any number of data collection **modules** + +`charts.d.plugin` has been designed so that the actual script that will do data collection will be permanently in +memory, collecting data with as little overheads as possible +(i.e. initialize once, repeatedly collect values with minimal overhead). + +`charts.d.plugin` looks for scripts in `/usr/lib/netdata/charts.d`. +The scripts should have the filename suffix: `.chart.sh`. + +## Configuration + +`charts.d.plugin` itself can be configured using the configuration file `/etc/netdata/charts.d.conf` +(to edit it on your system run `/etc/netdata/edit-config charts.d.conf`). This file is also a BASH script. + +In this file, you can place statements like this: + +``` +enable_all_charts="yes" +X="yes" +Y="no" +``` + +where `X` and `Y` are the names of individual charts.d collector scripts. +When set to `yes`, charts.d will evaluate the collector script (see below). +When set to `no`, charts.d will ignore the collector script. + +The variable `enable_all_charts` sets the default enable/disable state for all charts. + +## A charts.d module + +A `charts.d.plugin` module is a BASH script defining a few functions. + +For a module called `X`, the following criteria must be met: + +1. The module script must be called `X.chart.sh` and placed in `/usr/libexec/netdata/charts.d`. + +2. If the module needs a configuration, it should be called `X.conf` and placed in `/etc/netdata/charts.d`. + The configuration file `X.conf` is also a BASH script itself. + To edit the default files supplied by netdata run `/etc/netdata/edit-config charts.d/X.conf`, + where `X` is the name of the module. + +3. All functions and global variables defined in the script and its configuration, must begin with `X_`. + +4. The following functions must be defined: + + - `X_check()` - returns 0 or 1 depending on whether the module is able to run or not + (following the standard Linux command line return codes: 0 = OK, the collector can operate and 1 = FAILED, + the collector cannot be used). + + - `X_create()` - creates the netdata charts, following the standard netdata plugin guides as described in + **[External Plugins](../plugins.d/)** (commands `CHART` and `DIMENSION`). + The return value does matter: 0 = OK, 1 = FAILED. + + - `X_update()` - collects the values for the defined charts, following the standard netdata plugin guides + as described in **[External Plugins](../plugins.d/)** (commands `BEGIN`, `SET`, `END`). + The return value also matters: 0 = OK, 1 = FAILED. + +5. The following global variables are available to be set: + - `X_update_every` - is the data collection frequency for the module script, in seconds. + +The module script may use more functions or variables. But all of them must begin with `X_`. + +The standard netdata plugin variables are also available (check **[External Plugins](../plugins.d/)**). + +### X_check() + +The purpose of the BASH function `X_check()` is to check if the module can collect data (or check its config). + +For example, if the module is about monitoring a local mysql database, the `X_check()` function may attempt to +connect to a local mysql database to find out if it can read the values it needs. + +`X_check()` is run only once for the lifetime of the module. + +### X_create() + +The purpose of the BASH function `X_create()` is to create the charts and dimensions using the standard netdata +plugin guides (**[External Plugins](../plugins.d/)**). + +`X_create()` will be called just once and only after `X_check()` was successful. +You can however call it yourself when there is need for it (for example to add a new dimension to an existing chart). + +A non-zero return value will disable the collector. + +### X_update() + +`X_update()` will be called repeatedly every `X_update_every` seconds, to collect new values and send them to netdata, +following the netdata plugin guides (**[External Plugins](../plugins.d/)**). + +The function will be called with one parameter: microseconds since the last time it was run. This value should be +appended to the `BEGIN` statement of every chart updated by the collector script. + +A non-zero return value will disable the collector. + +### Useful functions charts.d provides + +Module scripts can use the following charts.d functions: + +#### require_cmd command + +`require_cmd()` will check if a command is available in the running system. + +For example, your `X_check()` function may use it like this: + +```sh +mysql_check() { + require_cmd mysql || return 1 + return 0 +} +``` + +Using the above, if the command `mysql` is not available in the system, the `mysql` module will be disabled. + +#### fixid "string" + +`fixid()` will get a string and return a properly formatted id for a chart or dimension. + +This is an expensive function that should not be used in `X_update()`. +You can keep the generated id in a BASH associative array to have the values availables in `X_update()`, like this: + +```sh +declare -A X_ids=() +X_create() { + local name="a very bad name for id" + + X_ids[$name]="$(fixid "$name")" +} + +X_update() { + local microseconds="$1" + + ... + local name="a very bad name for id" + ... + + echo "BEGIN ${X_ids[$name]} $microseconds" + ... +} +``` + +### Debugging your collectors + +You can run `charts.d.plugin` by hand with something like this: + +```sh +# become user netdata +sudo su -s /bin/sh netdata + +# run the plugin in debug mode +/usr/libexec/netdata/plugins.d/charts.d.plugin debug 1 X Y Z +``` + +Charts.d will run in `debug` mode, with an update frequency of `1`, evaluating only the collector scripts +`X`, `Y` and `Z`. You can define zero or more module scripts. If none is defined, charts.d will evaluate all +module scripts available. + +Keep in mind that if your configs are not in `/etc/netdata`, you should do the following before running +`charts.d.plugin`: + +```sh +export NETDATA_USER_CONFIG_DIR="/path/to/etc/netdata" +``` + +Also, remember that netdata runs `chart.d.plugin` as user `netdata` (or any other user netdata is configured to run as). + + +## Running multiple instances of charts.d.plugin + +`charts.d.plugin` will call the `X_update()` function one after another. This means that a delay in collector `X` +will also delay the collection of `Y` and `Z`. + +You can have multiple `charts.d.plugin` running to overcome this problem. + +This is what you need to do: + +1. Decide a new name for the new charts.d instance: example `charts2.d`. + +2. Create/edit the files `/etc/netdata/charts.d.conf` and `/etc/netdata/charts2.d.conf` and enable / disable the + module you want each to run. Remember to set `enable_all_charts="no"` to both of them, and enable the individual + modules for each. + +3. link `/usr/libexec/netdata/plugins.d/charts.d.plugin` to `/usr/libexec/netdata/plugins.d/charts2.d.plugin`. + Netdata will spawn a new charts.d process. + +Execute the above in this order, since netdata will (by default) attempt to start new plugins soon after they are +created in `/usr/libexec/netdata/plugins.d/`. + diff --git a/collectors/charts.d.plugin/ap/Makefile.inc b/collectors/charts.d.plugin/ap/Makefile.inc new file mode 100644 index 000000000..a2dd375ac --- /dev/null +++ b/collectors/charts.d.plugin/ap/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += ap/ap.chart.sh +dist_chartsconfig_DATA += ap/ap.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += ap/README.md ap/Makefile.inc + diff --git a/collectors/charts.d.plugin/ap/README.md b/collectors/charts.d.plugin/ap/README.md new file mode 100644 index 000000000..eb4e80707 --- /dev/null +++ b/collectors/charts.d.plugin/ap/README.md @@ -0,0 +1,84 @@ +# Access Point Plugin (ap) + +The `ap` collector visualizes data related to access points. + +## Example netdata charts + + + +## How it works + +It does the following: + +1. Runs `iw dev` searching for interfaces that have `type AP`. + + From the same output it collects the SSIDs each AP supports by looking for lines `ssid NAME`. + + Example: +```sh +# iw dev +phy#0 + Interface wlan0 + ifindex 3 + wdev 0x1 + addr 7c:dd:90:77:34:2a + ssid TSAOUSIS + type AP + channel 7 (2442 MHz), width: 20 MHz, center1: 2442 MHz +``` + + +2. For each interface found, it runs `iw INTERFACE station dump`. + + From the output is collects: + + - rx/tx bytes + - rx/tx packets + - tx retries + - tx failed + - signal strength + - rx/tx bitrate + - expected throughput + + Example: + +```sh +# iw wlan0 station dump +Station 40:b8:37:5a:ed:5e (on wlan0) + inactive time: 910 ms + rx bytes: 15588897 + rx packets: 127772 + tx bytes: 52257763 + tx packets: 95802 + tx retries: 2162 + tx failed: 28 + signal: -43 dBm + signal avg: -43 dBm + tx bitrate: 65.0 MBit/s MCS 7 + rx bitrate: 1.0 MBit/s + expected throughput: 32.125Mbps + authorized: yes + authenticated: yes + preamble: long + WMM/WME: yes + MFP: no + TDLS peer: no +``` + +3. For each interface found, it creates 6 charts: + + - Number of Connected clients + - Bandwidth for all clients + - Packets for all clients + - Transmit Issues for all clients + - Average Signal among all clients + - Average Bitrate (including average expected throughput) among all clients + +## Configuration + +You can only set `ap_update_every=NUMBER` to `/etc/netdata/charts.d/ap.conf`, to give the data collection frequency. +To edit this file on your system run `/etc/netdata/edit-config charts.d/ap.conf`. + +## Auto-detection + +The plugin is able to auto-detect if you are running access points on your linux box. diff --git a/collectors/charts.d.plugin/ap/ap.chart.sh b/collectors/charts.d.plugin/ap/ap.chart.sh new file mode 100644 index 000000000..ccc36120c --- /dev/null +++ b/collectors/charts.d.plugin/ap/ap.chart.sh @@ -0,0 +1,182 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +ap_update_every= +ap_priority=6900 + +declare -A ap_devs=() + +# _check is called once, to find out if this chart should be enabled or not +ap_check() { + require_cmd iw || return 1 + local ev + ev=$(run iw dev | awk ' + BEGIN { + i = ""; + ssid = ""; + ap = 0; + } + /^[ \t]+Interface / { + if( ap == 1 ) { + print "ap_devs[" i "]=\"" ssid "\"" + } + + i = $2; + ssid = ""; + ap = 0; + } + /^[ \t]+ssid / { ssid = $2; } + /^[ \t]+type AP$/ { ap = 1; } + END { + if( ap == 1 ) { + print "ap_devs[" i "]=\"" ssid "\"" + } + } + ') + eval "${ev}" + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + [ ${#ap_devs[@]} -gt 0 ] && return 0 + error "no devices found in AP mode, with 'iw dev'" + return 1 +} + +# _create is called once, to create the charts +ap_create() { + local ssid dev + + for dev in "${!ap_devs[@]}" + do + ssid="${ap_devs[${dev}]}" + + # create the chart with 3 dimensions + cat <<EOF +CHART ap_clients.${dev} '' "Connected clients to ${ssid} on ${dev}" "clients" ${dev} ap.clients line $((ap_priority + 1)) $ap_update_every +DIMENSION clients '' absolute 1 1 + +CHART ap_bandwidth.${dev} '' "Bandwidth for ${ssid} on ${dev}" "kilobits/s" ${dev} ap.net area $((ap_priority + 2)) $ap_update_every +DIMENSION received '' incremental 8 1024 +DIMENSION sent '' incremental -8 1024 + +CHART ap_packets.${dev} '' "Packets for ${ssid} on ${dev}" "packets/s" ${dev} ap.packets line $((ap_priority + 3)) $ap_update_every +DIMENSION received '' incremental 1 1 +DIMENSION sent '' incremental -1 1 + +CHART ap_issues.${dev} '' "Transmit Issues for ${ssid} on ${dev}" "issues/s" ${dev} ap.issues line $((ap_priority + 4)) $ap_update_every +DIMENSION retries 'tx retries' incremental 1 1 +DIMENSION failures 'tx failures' incremental -1 1 + +CHART ap_signal.${dev} '' "Average Signal for ${ssid} on ${dev}" "dBm" ${dev} ap.signal line $((ap_priority + 5)) $ap_update_every +DIMENSION signal 'average signal' absolute 1 1000 + +CHART ap_bitrate.${dev} '' "Bitrate for ${ssid} on ${dev}" "Mbps" ${dev} ap.bitrate line $((ap_priority + 6)) $ap_update_every +DIMENSION receive '' absolute 1 1000 +DIMENSION transmit '' absolute -1 1000 +DIMENSION expected 'expected throughput' absolute 1 1000 +EOF + done + + return 0 +} + +# _update is called continuously, to collect the values +ap_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + for dev in "${!ap_devs[@]}" + do + echo + echo "DEVICE ${dev}" + iw "${dev}" station dump + done | awk " + function zero_data() { + dev = \"\"; + c = 0; + rb = 0; + tb = 0; + rp = 0; + tp = 0; + tr = 0; + tf = 0; + tt = 0; + rt = 0; + s = 0; + g = 0; + e = 0; + } + function print_device() { + if(dev != \"\" && length(dev) > 0) { + print \"BEGIN ap_clients.\" dev; + print \"SET clients = \" c; + print \"END\"; + print \"BEGIN ap_bandwidth.\" dev; + print \"SET received = \" rb; + print \"SET sent = \" tb; + print \"END\"; + print \"BEGIN ap_packets.\" dev; + print \"SET received = \" rp; + print \"SET sent = \" tp; + print \"END\"; + print \"BEGIN ap_issues.\" dev; + print \"SET retries = \" tr; + print \"SET failures = \" tf; + print \"END\"; + + if( c == 0 ) c = 1; + print \"BEGIN ap_signal.\" dev; + print \"SET signal = \" int(s / c); + print \"END\"; + print \"BEGIN ap_bitrate.\" dev; + print \"SET receive = \" int(rt / c); + print \"SET transmit = \" int(tt / c); + print \"SET expected = \" int(e / c); + print \"END\"; + } + zero_data(); + } + BEGIN { + zero_data(); + } + /^DEVICE / { + print_device(); + dev = \$2; + } + /^Station/ { c++; } + /^[ \\t]+rx bytes:/ { rb += \$3; } + /^[ \\t]+tx bytes:/ { tb += \$3; } + /^[ \\t]+rx packets:/ { rp += \$3; } + /^[ \\t]+tx packets:/ { tp += \$3; } + /^[ \\t]+tx retries:/ { tr += \$3; } + /^[ \\t]+tx failed:/ { tf += \$3; } + /^[ \\t]+signal:/ { x = \$2; s += x * 1000; } + /^[ \\t]+rx bitrate:/ { x = \$3; rt += x * 1000; } + /^[ \\t]+tx bitrate:/ { x = \$3; tt += x * 1000; } + /^[ \\t]+expected throughput:(.*)Mbps/ { + x=\$3; + sub(/Mbps/, \"\", x); + e += x * 1000; + } + END { + print_device(); + } + " + + return 0 +} + diff --git a/collectors/charts.d.plugin/ap/ap.conf b/collectors/charts.d.plugin/ap/ap.conf new file mode 100644 index 000000000..38fc157ce --- /dev/null +++ b/collectors/charts.d.plugin/ap/ap.conf @@ -0,0 +1,23 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# nothing fancy to configure. +# this module will run +# iw dev - to find wireless devices in AP mode +# iw ${dev} station dump - to get connected clients +# based on the above, it generates several charts + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#ap_update_every= + +# the charts priority on the dashboard +#ap_priority=6900 + +# the number of retries to do in case of failure +# before disabling the module +#ap_retries=10 diff --git a/collectors/charts.d.plugin/apache/Makefile.inc b/collectors/charts.d.plugin/apache/Makefile.inc new file mode 100644 index 000000000..4b360eae0 --- /dev/null +++ b/collectors/charts.d.plugin/apache/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += apache/apache.chart.sh +dist_chartsconfig_DATA += apache/apache.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += apache/README.md apache/Makefile.inc + diff --git a/collectors/charts.d.plugin/apache/README.md b/collectors/charts.d.plugin/apache/README.md new file mode 100644 index 000000000..890cee984 --- /dev/null +++ b/collectors/charts.d.plugin/apache/README.md @@ -0,0 +1,127 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + +--- + +# Apache Plugin (apache) + +The `apache` collector visualizes key performance data for an apache web server. + +## Example netdata charts + +For apache 2.2: + + + +For apache 2.4: + + + +## How it works + +It runs `curl "http://apache.host/server-status?auto` to fetch the current status of apache. + +It has been tested with apache 2.2 and apache 2.4. The latter also provides connections information (total and break down by status). + +Apache 2.2 response: + +```sh +$ curl "http://127.0.0.1/server-status?auto" +Total Accesses: 80057 +Total kBytes: 223017 +CPULoad: .018287 +Uptime: 64472 +ReqPerSec: 1.24173 +BytesPerSec: 3542.15 +BytesPerReq: 2852.59 +BusyWorkers: 1 +IdleWorkers: 49 +Scoreboard: _________________________......................................._W_______________________....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... +``` + +Apache 2.4 response: + +```sh +$ curl "http://127.0.0.1/server-status?auto" +127.0.0.1 +ServerVersion: Apache/2.4.18 (Unix) +ServerMPM: event +Server Built: Dec 14 2015 08:05:54 +CurrentTime: Saturday, 23-Jan-2016 14:42:06 EET +RestartTime: Saturday, 23-Jan-2016 04:57:13 EET +ParentServerConfigGeneration: 2 +ParentServerMPMGeneration: 1 +ServerUptimeSeconds: 35092 +ServerUptime: 9 hours 44 minutes 52 seconds +Load1: 0.32 +Load5: 0.32 +Load15: 0.27 +Total Accesses: 32403 +Total kBytes: 34464 +CPUUser: 30.37 +CPUSystem: 29.55 +CPUChildrenUser: 0 +CPUChildrenSystem: 0 +CPULoad: .170751 +Uptime: 35092 +ReqPerSec: .923373 +BytesPerSec: 1005.67 +BytesPerReq: 1089.13 +BusyWorkers: 1 +IdleWorkers: 99 +ConnsTotal: 0 +ConnsAsyncWriting: 0 +ConnsAsyncKeepAlive: 0 +ConnsAsyncClosing: 0 +Scoreboard: __________________________________________________________________________________________W_________............................................................................................................................................................................................................................................................................................................ +``` + +From the apache status output it collects: + + - total accesses (incremental value, rendered as requests/s) + - total bandwidth (incremental value, rendered as bandwidth/s) + - requests per second (this appears to be calculated by apache as an average for its lifetime, while the one calculated by netdata using the total accesses counter is real-time) + - bytes per second (average for the lifetime of the apache server) + - bytes per request (average for the lifetime of the apache server) + - workers by status (`busy` and `idle`) + - total connections (currently active connections - offered by apache 2.4+) + - async connections per status (`keepalive`, `writing`, `closing` - offered by apache 2.4+) + +## Configuration + +The configuration is stored in `/etc/netdata/charts.d/apache.conf`. +To edit this file on your system run `/etc/netdata/edit-config charts.d/apache.conf`. + +The internal default is: + +```sh +# the URL your apache server is responding with mod_status information. +apache_url="http://127.0.0.1:80/server-status?auto" + +# use this to set custom curl options you may need +apache_curl_opts= + +# set this to a NUMBER to overwrite the update frequency +# it is in seconds +apache_update_every= +``` + +The default `apache_update_every` is configured in netdata. + +## Auto-detection + +If you have configured your apache server to offer server-status information on localhost clients, the defaults should work fine. + +## Apache Configuration + +Apache configuration differs between distributions. Please check your distribution's documentation for information on enabling apache's `mod_status` module. + +If you are able to run successfully, by hand this command: + +```sh +curl "http://127.0.0.1:80/server-status?auto" +``` + +netdata will be able to do it too. + +Notice: You may need to have the default `000-default.conf ` website enabled in order for the status mod to work. diff --git a/collectors/charts.d.plugin/apache/apache.chart.sh b/collectors/charts.d.plugin/apache/apache.chart.sh new file mode 100644 index 000000000..95876432f --- /dev/null +++ b/collectors/charts.d.plugin/apache/apache.chart.sh @@ -0,0 +1,258 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# the URL to download apache status info +apache_url="http://127.0.0.1:80/server-status?auto" +apache_curl_opts= + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +apache_update_every= + +apache_priority=60000 + +# convert apache floating point values +# to integer using this multiplier +# this only affects precision - the values +# will be in the proper units +apache_decimal_detail=1000000 + +declare -a apache_response=() +apache_accesses=0 +apache_kbytes=0 +apache_reqpersec=0 +apache_bytespersec=0 +apache_bytesperreq=0 +apache_busyworkers=0 +apache_idleworkers=0 +apache_connstotal=0 +apache_connsasyncwriting=0 +apache_connsasynckeepalive=0 +apache_connsasyncclosing=0 + +apache_keys_detected=0 +apache_has_conns=0 +apache_key_accesses= +apache_key_kbytes= +apache_key_reqpersec= +apache_key_bytespersec= +apache_key_bytesperreq= +apache_key_busyworkers= +apache_key_idleworkers= +apache_key_scoreboard= +apache_key_connstotal= +apache_key_connsasyncwriting= +apache_key_connsasynckeepalive= +apache_key_connsasyncclosing= +apache_detect() { + local i=0 + for x in "${@}" + do + case "${x}" in + 'Total Accesses') apache_key_accesses=$((i + 1)) ;; + 'Total kBytes') apache_key_kbytes=$((i + 1)) ;; + 'ReqPerSec') apache_key_reqpersec=$((i + 1)) ;; + 'BytesPerSec') apache_key_bytespersec=$((i + 1)) ;; + 'BytesPerReq') apache_key_bytesperreq=$((i + 1)) ;; + 'BusyWorkers') apache_key_busyworkers=$((i + 1)) ;; + 'IdleWorkers') apache_key_idleworkers=$((i + 1));; + 'ConnsTotal') apache_key_connstotal=$((i + 1)) ;; + 'ConnsAsyncWriting') apache_key_connsasyncwriting=$((i + 1)) ;; + 'ConnsAsyncKeepAlive') apache_key_connsasynckeepalive=$((i + 1)) ;; + 'ConnsAsyncClosing') apache_key_connsasyncclosing=$((i + 1)) ;; + 'Scoreboard') apache_key_scoreboard=$((i)) ;; + esac + + i=$((i + 1)) + done + + # we will not check of the Conns* + # keys, since these are apache 2.4 specific + [ -z "${apache_key_accesses}" ] && error "missing 'Total Accesses' from apache server: ${*}" && return 1 + [ -z "${apache_key_kbytes}" ] && error "missing 'Total kBytes' from apache server: ${*}" && return 1 + [ -z "${apache_key_reqpersec}" ] && error "missing 'ReqPerSec' from apache server: ${*}" && return 1 + [ -z "${apache_key_bytespersec}" ] && error "missing 'BytesPerSec' from apache server: ${*}" && return 1 + [ -z "${apache_key_bytesperreq}" ] && error "missing 'BytesPerReq' from apache server: ${*}" && return 1 + [ -z "${apache_key_busyworkers}" ] && error "missing 'BusyWorkers' from apache server: ${*}" && return 1 + [ -z "${apache_key_idleworkers}" ] && error "missing 'IdleWorkers' from apache server: ${*}" && return 1 + [ -z "${apache_key_scoreboard}" ] && error "missing 'Scoreboard' from apache server: ${*}" && return 1 + + if [ ! -z "${apache_key_connstotal}" ] && \ + [ ! -z "${apache_key_connsasyncwriting}" ] && \ + [ ! -z "${apache_key_connsasynckeepalive}" ] && \ + [ ! -z "${apache_key_connsasyncclosing}" ] + then + apache_has_conns=1 + else + apache_has_conns=0 + fi + + return 0 +} + +apache_get() { + local oIFS="${IFS}" ret + # shellcheck disable=2207 + IFS=$':\n' apache_response=($(run curl -Ss ${apache_curl_opts} "${apache_url}")) + ret=$? + IFS="${oIFS}" + + if [ $ret -ne 0 ] || [ "${#apache_response[@]}" -eq 0 ] + then + return 1 + fi + + # the last line on the apache output is "Scoreboard" + # we use this label to detect that the output has a new word count + if [ ${apache_keys_detected} -eq 0 ] || [ "${apache_response[${apache_key_scoreboard}]}" != "Scoreboard" ] + then + apache_detect "${apache_response[@]}" || return 1 + apache_keys_detected=1 + fi + + apache_accesses="${apache_response[${apache_key_accesses}]}" + apache_kbytes="${apache_response[${apache_key_kbytes}]}" + + float2int "${apache_response[${apache_key_reqpersec}]}" ${apache_decimal_detail} + apache_reqpersec=${FLOAT2INT_RESULT} + + float2int "${apache_response[${apache_key_bytespersec}]}" ${apache_decimal_detail} + apache_bytespersec=${FLOAT2INT_RESULT} + + float2int "${apache_response[${apache_key_bytesperreq}]}" ${apache_decimal_detail} + apache_bytesperreq=${FLOAT2INT_RESULT} + + apache_busyworkers="${apache_response[${apache_key_busyworkers}]}" + apache_idleworkers="${apache_response[${apache_key_idleworkers}]}" + + if [ -z "${apache_accesses}" ] || \ + [ -z "${apache_kbytes}" ] || \ + [ -z "${apache_reqpersec}" ] || \ + [ -z "${apache_bytespersec}" ] || \ + [ -z "${apache_bytesperreq}" ] || \ + [ -z "${apache_busyworkers}" ] + [ -z "${apache_idleworkers}" ] + then + error "empty values got from apache server: ${apache_response[*]}" + return 1 + fi + + if [ ${apache_has_conns} -eq 1 ] + then + apache_connstotal="${apache_response[${apache_key_connstotal}]}" + apache_connsasyncwriting="${apache_response[${apache_key_connsasyncwriting}]}" + apache_connsasynckeepalive="${apache_response[${apache_key_connsasynckeepalive}]}" + apache_connsasyncclosing="${apache_response[${apache_key_connsasyncclosing}]}" + fi + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +apache_check() { + + apache_get + # shellcheck disable=2181 + if [ $? -ne 0 ] + then + # shellcheck disable=2154 + error "cannot find stub_status on URL '${apache_url}'. Please set apache_url='http://apache.server:80/server-status?auto' in $confd/apache.conf" + return 1 + fi + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + return 0 +} + +# _create is called once, to create the charts +apache_create() { + cat <<EOF +CHART apache_local.bytesperreq '' "apache Lifetime Avg. Response Size" "bytes/request" statistics apache.bytesperreq area $((apache_priority + 8)) $apache_update_every +DIMENSION size '' absolute 1 ${apache_decimal_detail} +CHART apache_local.workers '' "apache Workers" "workers" workers apache.workers stacked $((apache_priority + 5)) $apache_update_every +DIMENSION idle '' absolute 1 1 +DIMENSION busy '' absolute 1 1 +CHART apache_local.reqpersec '' "apache Lifetime Avg. Requests/s" "requests/s" statistics apache.reqpersec line $((apache_priority + 6)) $apache_update_every +DIMENSION requests '' absolute 1 ${apache_decimal_detail} +CHART apache_local.bytespersec '' "apache Lifetime Avg. Bandwidth/s" "kilobits/s" statistics apache.bytespersec area $((apache_priority + 7)) $apache_update_every +DIMENSION sent '' absolute 8 $((apache_decimal_detail * 1000)) +CHART apache_local.requests '' "apache Requests" "requests/s" requests apache.requests line $((apache_priority + 1)) $apache_update_every +DIMENSION requests '' incremental 1 1 +CHART apache_local.net '' "apache Bandwidth" "kilobits/s" bandwidth apache.net area $((apache_priority + 3)) $apache_update_every +DIMENSION sent '' incremental 8 1 +EOF + + if [ ${apache_has_conns} -eq 1 ] + then + cat <<EOF2 +CHART apache_local.connections '' "apache Connections" "connections" connections apache.connections line $((apache_priority + 2)) $apache_update_every +DIMENSION connections '' absolute 1 1 +CHART apache_local.conns_async '' "apache Async Connections" "connections" connections apache.conns_async stacked $((apache_priority + 4)) $apache_update_every +DIMENSION keepalive '' absolute 1 1 +DIMENSION closing '' absolute 1 1 +DIMENSION writing '' absolute 1 1 +EOF2 + fi + + return 0 +} + +# _update is called continuously, to collect the values +apache_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + apache_get || return 1 + + # write the result of the work. + cat <<VALUESEOF +BEGIN apache_local.requests $1 +SET requests = $((apache_accesses)) +END +BEGIN apache_local.net $1 +SET sent = $((apache_kbytes)) +END +BEGIN apache_local.reqpersec $1 +SET requests = $((apache_reqpersec)) +END +BEGIN apache_local.bytespersec $1 +SET sent = $((apache_bytespersec)) +END +BEGIN apache_local.bytesperreq $1 +SET size = $((apache_bytesperreq)) +END +BEGIN apache_local.workers $1 +SET idle = $((apache_idleworkers)) +SET busy = $((apache_busyworkers)) +END +VALUESEOF + + if [ ${apache_has_conns} -eq 1 ] + then + cat <<VALUESEOF2 +BEGIN apache_local.connections $1 +SET connections = $((apache_connstotal)) +END +BEGIN apache_local.conns_async $1 +SET keepalive = $((apache_connsasynckeepalive)) +SET closing = $((apache_connsasyncclosing)) +SET writing = $((apache_connsasyncwriting)) +END +VALUESEOF2 + fi + + return 0 +} diff --git a/collectors/charts.d.plugin/apache/apache.conf b/collectors/charts.d.plugin/apache/apache.conf new file mode 100644 index 000000000..50914cf32 --- /dev/null +++ b/collectors/charts.d.plugin/apache/apache.conf @@ -0,0 +1,30 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# the URL to download apache status info +#apache_url="http://127.0.0.1:80/server-status?auto" +#apache_curl_opts= + +# convert apache floating point values +# to integer using this multiplier +# this only affects precision - the values +# will be in the proper units +#apache_decimal_detail=1000000 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#apache_update_every= + +# the charts priority on the dashboard +#apache_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#apache_retries=10 diff --git a/collectors/charts.d.plugin/apcupsd/Makefile.inc b/collectors/charts.d.plugin/apcupsd/Makefile.inc new file mode 100644 index 000000000..19cb9cad7 --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += apcupsd/apcupsd.chart.sh +dist_chartsconfig_DATA += apcupsd/apcupsd.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += apcupsd/README.md apcupsd/Makefile.inc + diff --git a/collectors/charts.d.plugin/apcupsd/README.md b/collectors/charts.d.plugin/apcupsd/README.md new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/README.md diff --git a/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh new file mode 100644 index 000000000..e26ef566a --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh @@ -0,0 +1,201 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +apcupsd_ip= +apcupsd_port= + +declare -A apcupsd_sources=( + ["local"]="127.0.0.1:3551" +) + +# how frequently to collect UPS data +apcupsd_update_every=10 + +apcupsd_timeout=3 + +# the priority of apcupsd related to other charts +apcupsd_priority=90000 + +apcupsd_get() { + run -t $apcupsd_timeout apcaccess status "$1" +} + +apcupsd_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + require_cmd apcaccess || return 1 + + # backwards compatibility + if [ "${apcupsd_ip}:${apcupsd_port}" != ":" ] + then + apcupsd_sources["local"]="${apcupsd_ip}:${apcupsd_port}" + fi + + local host working=0 failed=0 + for host in "${!apcupsd_sources[@]}" + do + run apcupsd_get "${apcupsd_sources[${host}]}" >/dev/null + # shellcheck disable=2181 + if [ $? -ne 0 ] + then + error "cannot get information for apcupsd server ${host} on ${apcupsd_sources[${host}]}." + failed=$((failed + 1)) + elif [ "$(apcupsd_get "${apcupsd_sources[${host}]}" | awk '/^STATUS.*/{ print $3 }')" != "ONLINE" ] + then + error "APC UPS ${host} on ${apcupsd_sources[${host}]} is not online." + failed=$((failed + 1)) + else + working=$((working + 1)) + fi + done + + if [ ${working} -eq 0 ] + then + error "No APC UPSes found available." + return 1 + fi + + return 0 +} + +apcupsd_create() { + local host src + for host in "${!apcupsd_sources[@]}" + do + src=${apcupsd_sources[${host}]} + + # create the charts + cat <<EOF +CHART apcupsd_${host}.charge '' "UPS Charge for ${host} on ${src}" "percentage" ups apcupsd.charge area $((apcupsd_priority + 1)) $apcupsd_update_every +DIMENSION battery_charge charge absolute 1 100 + +CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage for ${host} on ${src}" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 3)) $apcupsd_update_every +DIMENSION battery_voltage voltage absolute 1 100 +DIMENSION battery_voltage_nominal nominal absolute 1 100 + +CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage for ${host} on ${src}" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every +DIMENSION input_voltage voltage absolute 1 100 +DIMENSION input_voltage_min min absolute 1 100 +DIMENSION input_voltage_max max absolute 1 100 + +CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency for ${host} on ${src}" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 5)) $apcupsd_update_every +DIMENSION input_frequency frequency absolute 1 100 + +CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage for ${host} on ${src}" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 6)) $apcupsd_update_every +DIMENSION output_voltage voltage absolute 1 100 +DIMENSION output_voltage_nominal nominal absolute 1 100 + +CHART apcupsd_${host}.load '' "UPS Load for ${host} on ${src}" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every +DIMENSION load load absolute 1 100 + +CHART apcupsd_${host}.temp '' "UPS Temperature for ${host} on ${src}" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 7)) $apcupsd_update_every +DIMENSION temp temp absolute 1 100 + +CHART apcupsd_${host}.time '' "UPS Time Remaining for ${host} on ${src}" "Minutes" ups apcupsd.time area $((apcupsd_priority + 2)) $apcupsd_update_every +DIMENSION time time absolute 1 100 + +EOF + done + return 0 +} + + +apcupsd_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local host working=0 failed=0 + for host in "${!apcupsd_sources[@]}" + do + apcupsd_get "${apcupsd_sources[${host}]}" | awk " + +BEGIN { + battery_charge = 0; + battery_voltage = 0; + battery_voltage_nominal = 0; + input_voltage = 0; + input_voltage_min = 0; + input_voltage_max = 0; + input_frequency = 0; + output_voltage = 0; + output_voltage_nominal = 0; + load = 0; + temp = 0; + time = 0; +} +/^BCHARGE.*/ { battery_charge = \$3 * 100 }; +/^BATTV.*/ { battery_voltage = \$3 * 100 }; +/^NOMBATTV.*/ { battery_voltage_nominal = \$3 * 100 }; +/^LINEV.*/ { input_voltage = \$3 * 100 }; +/^MINLINEV.*/ { input_voltage_min = \$3 * 100 }; +/^MAXLINEV.*/ { input_voltage_max = \$3 * 100 }; +/^LINEFREQ.*/ { input_frequency = \$3 * 100 }; +/^OUTPUTV.*/ { output_voltage = \$3 * 100 }; +/^NOMOUTV.*/ { output_voltage_nominal = \$3 * 100 }; +/^LOADPCT.*/ { load = \$3 * 100 }; +/^ITEMP.*/ { temp = \$3 * 100 }; +/^TIMELEFT.*/ { time = \$3 * 100 }; +END { + print \"BEGIN apcupsd_${host}.charge $1\"; + print \"SET battery_charge = \" battery_charge; + print \"END\" + + print \"BEGIN apcupsd_${host}.battery_voltage $1\"; + print \"SET battery_voltage = \" battery_voltage; + print \"SET battery_voltage_nominal = \" battery_voltage_nominal; + print \"END\" + + print \"BEGIN apcupsd_${host}.input_voltage $1\"; + print \"SET input_voltage = \" input_voltage; + print \"SET input_voltage_min = \" input_voltage_min; + print \"SET input_voltage_max = \" input_voltage_max; + print \"END\" + + print \"BEGIN apcupsd_${host}.input_frequency $1\"; + print \"SET input_frequency = \" input_frequency; + print \"END\" + + print \"BEGIN apcupsd_${host}.output_voltage $1\"; + print \"SET output_voltage = \" output_voltage; + print \"SET output_voltage_nominal = \" output_voltage_nominal; + print \"END\" + + print \"BEGIN apcupsd_${host}.load $1\"; + print \"SET load = \" load; + print \"END\" + + print \"BEGIN apcupsd_${host}.temp $1\"; + print \"SET temp = \" temp; + print \"END\" + + print \"BEGIN apcupsd_${host}.time $1\"; + print \"SET time = \" time; + print \"END\" +}" + # shellcheck disable=SC2181 + if [ $? -ne 0 ] + then + failed=$((failed + 1)) + error "failed to get values for APC UPS ${host} on ${apcupsd_sources[${host}]}" && return 1 + else + working=$((working + 1)) + fi + done + + [ $working -eq 0 ] && error "failed to get values from all APC UPSes" && return 1 + + return 0 +} diff --git a/collectors/charts.d.plugin/apcupsd/apcupsd.conf b/collectors/charts.d.plugin/apcupsd/apcupsd.conf new file mode 100644 index 000000000..679c0d61b --- /dev/null +++ b/collectors/charts.d.plugin/apcupsd/apcupsd.conf @@ -0,0 +1,25 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# add all your APC UPSes in this array - uncomment it too +#declare -A apcupsd_sources=( +# ["local"]="127.0.0.1:3551" +#) + +# how long to wait for apcupsd to respond +#apcupsd_timeout=3 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#apcupsd_update_every=10 + +# the charts priority on the dashboard +#apcupsd_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#apcupsd_retries=10 diff --git a/collectors/charts.d.plugin/charts.d.conf b/collectors/charts.d.plugin/charts.d.conf new file mode 100644 index 000000000..acb2a6fae --- /dev/null +++ b/collectors/charts.d.plugin/charts.d.conf @@ -0,0 +1,63 @@ +# This is the configuration for charts.d.plugin + +# Each of its collectors can read configuration eiher from this file +# or a NAME.conf file (where NAME is the collector name). +# The collector specific file has higher precedence. + +# This file is a shell script too. + +# ----------------------------------------------------------------------------- + +# number of seconds to run without restart +# after this time, charts.d.plugin will exit +# netdata will restart it, but a small gap +# will appear in the charts.d.plugin charts. +#restart_timeout=$[3600 * 4] + +# when making iterations, charts.d can loop more frequently +# to prevent plugins missing iterations. +# this is a percentage relative to update_every to align its +# iterations. +# The minimum is 10%, the maximum 100%. +# So, if update_every is 1 second and time_divisor is 50, +# charts.d will iterate every 500ms. +# Charts will be called to collect data only if the time +# passed since the last time the collected data is equal or +# above their update_every. +#time_divisor=50 + +# ----------------------------------------------------------------------------- + +# the default enable/disable for all charts.d collectors +# the default is "yes" +# enable_all_charts="yes" + +# BY DEFAULT ENABLED MODULES +# ap=yes +# nut=yes +# opensips=yes + +# ----------------------------------------------------------------------------- +# THESE NEED TO BE SET TO "force" TO BE ENABLED + +# Nothing useful. +# Just an example charts.d plugin you can use as a template. +# example=force + +# OLD MODULES THAT ARE NOW SERVED BY python.d.plugin +# apache=force +# cpufreq=force +# exim=force +# hddtemp=force +# mysql=force +# nginx=force +# phpfpm=force +# postfix=force +# sensors=force +# squid=force +# tomcat=force + +# OLD MODULES THAT ARE NOW SERVED BY NETDATA DAEMON +# cpu_apps=force +# mem_apps=force +# load_average=force diff --git a/collectors/charts.d.plugin/charts.d.dryrun-helper.sh b/collectors/charts.d.plugin/charts.d.dryrun-helper.sh new file mode 100755 index 000000000..67496c1bd --- /dev/null +++ b/collectors/charts.d.plugin/charts.d.dryrun-helper.sh @@ -0,0 +1,78 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +# shellcheck disable=SC2181 + +# will stop the script for any error +set -e + +me="$0" +name="$1" +chart="$2" +conf="$3" + +can_diff=1 + +tmp1="$(mktemp)" +tmp2="$(mktemp)" + +myset() { + set | grep -v "^_=" | grep -v "^PIPESTATUS=" | grep -v "^BASH_LINENO=" +} + +# save 2 'set' +myset >"$tmp1" +myset >"$tmp2" + +# make sure they don't differ +diff "$tmp1" "$tmp2" >/dev/null 2>&1 +if [ $? -ne 0 ] +then + # they differ, we cannot do the check + echo >&2 "$me: cannot check with diff." + can_diff=0 +fi + +# do it again, now including the script +myset >"$tmp1" + +# include the plugin and its config +if [ -f "$conf" ] +then + # shellcheck source=/dev/null + . "$conf" + if [ $? -ne 0 ] + then + echo >&2 "$me: cannot load config file $conf" + rm "$tmp1" "$tmp2" + exit 1 + fi +fi + +# shellcheck source=/dev/null +. "$chart" +if [ $? -ne 0 ] +then + echo >&2 "$me: cannot load chart file $chart" + rm "$tmp1" "$tmp2" + exit 1 +fi + +# remove all variables starting with the plugin name +myset | grep -v "^$name" >"$tmp2" + +if [ $can_diff -eq 1 ] +then + # check if they are different + # make sure they don't differ + diff "$tmp1" "$tmp2" >&2 + if [ $? -ne 0 ] + then + # they differ + rm "$tmp1" "$tmp2" + exit 1 + fi +fi + +rm "$tmp1" "$tmp2" +exit 0 diff --git a/collectors/charts.d.plugin/charts.d.plugin b/collectors/charts.d.plugin/charts.d.plugin new file mode 100644 index 000000000..1c6e8c5c9 --- /dev/null +++ b/collectors/charts.d.plugin/charts.d.plugin @@ -0,0 +1,743 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2017 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ +# +# charts.d.plugin allows easy development of BASH plugins +# +# if you need to run parallel charts.d processes, link this file to a different name +# in the same directory, with a .plugin suffix and netdata will start both of them, +# each will have a different config file and modules configuration directory. +# + +export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin" + +PROGRAM_FILE="$0" +PROGRAM_NAME="$(basename $0)" +PROGRAM_NAME="${PROGRAM_NAME/.plugin}" +MODULE_NAME="main" + +# ----------------------------------------------------------------------------- +# create temp dir + +debug=0 +TMP_DIR= +chartsd_cleanup() { + trap '' EXIT QUIT HUP INT TERM + + if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." + rm -rf "$TMP_DIR" + fi + exit 0 +} +trap chartsd_cleanup EXIT QUIT HUP INT TERM + +if [ $UID = "0" ] +then + TMP_DIR="$( mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX )" +else + TMP_DIR="$( mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX )" +fi + +logdate() { + date "+%Y-%m-%d %H:%M:%S" +} + +log() { + local status="${1}" + shift + + echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: ${*}" + +} + +warning() { + log WARNING "${@}" +} + +error() { + log ERROR "${@}" +} + +info() { + log INFO "${@}" +} + +fatal() { + log FATAL "${@}" + echo "DISABLE" + exit 1 +} + +debug() { + [ $debug -eq 1 ] && log DEBUG "${@}" +} + +# ----------------------------------------------------------------------------- +# check a few commands + +require_cmd() { + local x=$(which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null) + if [ -z "${x}" -o ! -x "${x}" ] + then + warning "command '${1}' is not found in ${PATH}." + eval "${1^^}_CMD=\"\"" + return 1 + fi + + eval "${1^^}_CMD=\"${x}\"" + return 0 +} + +require_cmd date || exit 1 +require_cmd sed || exit 1 +require_cmd basename || exit 1 +require_cmd dirname || exit 1 +require_cmd cat || exit 1 +require_cmd grep || exit 1 +require_cmd egrep || exit 1 +require_cmd mktemp || exit 1 +require_cmd awk || exit 1 +require_cmd timeout || exit 1 +require_cmd curl || exit 1 + +# ----------------------------------------------------------------------------- + +[ $(( ${BASH_VERSINFO[0]} )) -lt 4 ] && fatal "BASH version 4 or later is required, but found version: ${BASH_VERSION}. Please upgrade." + +info "started from '$PROGRAM_FILE' with options: $*" + +# ----------------------------------------------------------------------------- +# internal defaults +# netdata exposes a few environment variables for us + +[ -z "${NETDATA_PLUGINS_DIR}" ] && NETDATA_PLUGINS_DIR="$(dirname "${0}")" +[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/usr/local/etc/netdata" +[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/local/lib/netdata/conf.d" + +pluginsd="${NETDATA_PLUGINS_DIR}" +stockconfd="${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}" +userconfd="${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}" +olduserconfd="${NETDATA_USER_CONFIG_DIR}" +chartsd="$pluginsd/../charts.d" + +minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}" +update_every=${minimum_update_frequency} # this will be overwritten by the command line + +# work around for non BASH shells +charts_create="_create" +charts_update="_update" +charts_check="_check" +charts_undescore="_" + +# when making iterations, charts.d can loop more frequently +# to prevent plugins missing iterations. +# this is a percentage relative to update_every to align its +# iterations. +# The minimum is 10%, the maximum 100%. +# So, if update_every is 1 second and time_divisor is 50, +# charts.d will iterate every 500ms. +# Charts will be called to collect data only if the time +# passed since the last time the collected data is equal or +# above their update_every. +time_divisor=50 + +# number of seconds to run without restart +# after this time, charts.d.plugin will exit +# netdata will restart it +restart_timeout=$((3600 * 4)) + +# check if the charts.d plugins are using global variables +# they should not. +# It does not currently support BASH v4 arrays, so it is +# disabled +dryrunner=0 + +# check for timeout command +check_for_timeout=1 + +# the default enable/disable value for all charts +enable_all_charts="yes" + +# ----------------------------------------------------------------------------- +# parse parameters + +check=0 +chart_only= +while [ ! -z "$1" ] +do + if [ "$1" = "check" ] + then + check=1 + shift + continue + fi + + if [ "$1" = "debug" -o "$1" = "all" ] + then + debug=1 + shift + continue + fi + + if [ -f "$chartsd/$1.chart.sh" ] + then + debug=1 + chart_only="$( echo $1.chart.sh | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + if [ -f "$chartsd/$1" ] + then + debug=1 + chart_only="$( echo $1 | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + # number check + n="$1" + x=$(( n )) + if [ "$x" = "$n" ] + then + shift + update_every=$x + [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency + continue + fi + + fatal "Cannot understand parameter $1. Aborting." +done + + +# ----------------------------------------------------------------------------- +# loop control + +# default sleep function +LOOPSLEEPMS_HIGHRES=0 +now_ms= +current_time_ms_default() { + now_ms="$(date +'%s')000" +} +current_time_ms="current_time_ms_default" +current_time_ms_accuracy=1 +mysleep="sleep" + +# if found and included, this file overwrites loopsleepms() +# and current_time_ms() with a high resolution timer function +# for precise looping. +source "$pluginsd/loopsleepms.sh.inc" +[ $? -ne 0 ] && error "Failed to load '$pluginsd/loopsleepms.sh.inc'." + +# ----------------------------------------------------------------------------- +# load my configuration + +for myconfig in "${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}.conf" "${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf" +do + if [ -f "$myconfig" ] + then + source "$myconfig" + if [ $? -ne 0 ] + then + error "Config file '$myconfig' loaded with errors." + else + info "Configuration file '$myconfig' loaded." + fi + else + warning "Configuration file '$myconfig' not found." + fi +done + +# make sure time_divisor is right +time_divisor=$((time_divisor)) +[ $time_divisor -lt 10 ] && time_divisor=10 +[ $time_divisor -gt 100 ] && time_divisor=100 + + +# we check for the timeout command, after we load our +# configuration, so that the user may overwrite the +# timeout command we use, providing a function that +# can emulate the timeout command we need: +# > timeout SECONDS command ... +if [ $check_for_timeout -eq 1 ] + then + require_cmd timeout || exit 1 +fi + +# ----------------------------------------------------------------------------- +# internal checks + +# netdata passes the requested update frequency as the first argument +update_every=$(( update_every + 1 - 1)) # makes sure it is a number +test $update_every -eq 0 && update_every=1 # if it is zero, make it 1 + +# check the charts.d directory +[ ! -d "$chartsd" ] && fatal "cannot find charts directory '$chartsd'" + +# ----------------------------------------------------------------------------- +# library functions + +fixid() { + echo "$*" |\ + tr -c "[A-Z][a-z][0-9]" "_" |\ + sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" |\ + tr "[A-Z]" "[a-z]" +} + +run() { + local ret pid="${BASHPID}" t + + if [ "z${1}" = "z-t" -a "${2}" != "0" ] + then + t="${2}" + shift 2 + timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + else + "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + fi + + if [ ${ret} -ne 0 ] + then + { + printf "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: command '" + printf "%q " "${@}" + printf "' failed with code ${ret}:\n --- BEGIN TRACE ---\n" + cat "${TMP_DIR}/run.${pid}" + printf " --- END TRACE ---\n" + } >&2 + fi + rm "${TMP_DIR}/run.${pid}" + + return ${ret} +} + +# convert any floating point number +# to integer, give a multiplier +# the result is stored in ${FLOAT2INT_RESULT} +# so that no fork is necessary +# the multiplier must be a power of 10 +float2int() { + local f m="$2" a b l v=($1) + f=${v[0]} + + # the length of the multiplier - 1 + l=$(( ${#m} - 1 )) + + # check if the number is in scientific notation + if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]] + then + # convert it to decimal + # unfortunately, this fork cannot be avoided + # if you know of a way to avoid it, please let me know + f=$(printf "%0.${l}f" ${f}) + fi + + # split the floating point number + # in integer (a) and decimal (b) + a=${f/.*/} + b=${f/*./} + + # if the integer part is missing + # set it to zero + [ -z "${a}" ] && a="0" + + # strip leading zeros from the integer part + # base 10 convertion + a=$((10#$a)) + + # check the length of the decimal part + # against the length of the multiplier + if [ ${#b} -gt ${l} ] + then + # too many digits - take the most significant + b=${b:0:${l}} + + elif [ ${#b} -lt ${l} ] + then + # too few digits - pad with zero on the right + local z="00000000000000000000000" r=$((l - ${#b})) + b="${b}${z:0:${r}}" + fi + + # strip leading zeros from the decimal part + # base 10 convertion + b=$((10#$b)) + + # store the result + FLOAT2INT_RESULT=$(( (a * m) + b )) +} + + +# ----------------------------------------------------------------------------- +# charts check functions + +all_charts() { + cd "$chartsd" + [ $? -ne 0 ] && error "cannot cd to $chartsd" && return 1 + + ls *.chart.sh | sed "s/\.chart\.sh$//g" +} + +declare -A charts_enable_keyword=( + ['apache']="force" + ['cpu_apps']="force" + ['cpufreq']="force" + ['example']="force" + ['exim']="force" + ['hddtemp']="force" + ['load_average']="force" + ['mem_apps']="force" + ['mysql']="force" + ['nginx']="force" + ['phpfpm']="force" + ['postfix']="force" + ['sensors']="force" + ['squid']="force" + ['tomcat']="force" + ) + +all_enabled_charts() { + local charts= enabled= required= + + # find all enabled charts + + for chart in $( all_charts ) + do + MODULE_NAME="${chart}" + + eval "enabled=\$$chart" + if [ -z "${enabled}" ] + then + enabled="${enable_all_charts}" + fi + + required="${charts_enable_keyword[${chart}]}" + [ -z "${required}" ] && required="yes" + + if [ ! "${enabled}" = "${required}" ] + then + info "is disabled. Add a line with $chart=$required in '${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf' to enable it (or remove the line that disables it)." + else + debug "is enabled for auto-detection." + local charts="$charts $chart" + fi + done + MODULE_NAME="main" + + local charts2= + for chart in $charts + do + MODULE_NAME="${chart}" + + # check the enabled charts + local check="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()" )" + if [ -z "$check" ] + then + error "module '$chart' does not seem to have a $chart$charts_check() function. Disabling it." + continue + fi + + local create="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()" )" + if [ -z "$create" ] + then + error "module '$chart' does not seem to have a $chart$charts_create() function. Disabling it." + continue + fi + + local update="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()" )" + if [ -z "$update" ] + then + error "module '$chart' does not seem to have a $chart$charts_update() function. Disabling it." + continue + fi + + # check its config + #if [ -f "$userconfd/$chart.conf" ] + #then + # if [ ! -z "$( cat "$userconfd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] + # then + # error "module's $chart config $userconfd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." + # continue + # fi + #fi + + #if [ $dryrunner -eq 1 ] + # then + # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$userconfd/$chart.conf" >/dev/null + # if [ $? -ne 0 ] + # then + # error "module's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." + # continue + # fi + #fi + + local charts2="$charts2 $chart" + done + MODULE_NAME="main" + + echo $charts2 + debug "enabled charts: $charts2" +} + +# ----------------------------------------------------------------------------- +# load the charts + +suffix_retries="_retries" +suffix_update_every="_update_every" +active_charts= +for chart in $( all_enabled_charts ) +do + MODULE_NAME="${chart}" + + debug "loading module: '$chartsd/$chart.chart.sh'" + + source "$chartsd/$chart.chart.sh" + [ $? -ne 0 ] && warning "Module '$chartsd/$chart.chart.sh' loaded with errors." + + # first load the stock config + if [ -f "$stockconfd/$chart.conf" ] + then + debug "loading module configuration: '$stockconfd/$chart.conf'" + source "$stockconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$stockconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$stockconfd/$chart.conf'" + fi + + # then load the user config (it overwrites the stock) + if [ -f "$userconfd/$chart.conf" ] + then + debug "loading module configuration: '$userconfd/$chart.conf'" + source "$userconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$userconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$userconfd/$chart.conf'" + + if [ -f "$olduserconfd/$chart.conf" ] + then + # support for very old netdata that had the charts.d module configs in /etc/netdata + info "loading module configuration from obsolete location: '$olduserconfd/$chart.conf'" + source "$olduserconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$olduserconfd/$chart.conf' loaded with errors." + fi + fi + + eval "dt=\$$chart$suffix_update_every" + dt=$(( dt + 1 - 1 )) # make sure it is a number + if [ $dt -lt $update_every ] + then + eval "$chart$suffix_update_every=$update_every" + fi + + $chart$charts_check + if [ $? -eq 0 ] + then + debug "module '$chart' activated" + active_charts="$active_charts $chart" + else + error "module's '$chart' check() function reports failure." + fi +done +MODULE_NAME="main" +debug "activated modules: $active_charts" + + +# ----------------------------------------------------------------------------- +# check overwrites + +# enable work time reporting +debug_time= +test $debug -eq 1 && debug_time=tellwork + +# if we only need a specific chart, remove all the others +if [ ! -z "${chart_only}" ] +then + debug "requested to run only for: '${chart_only}'" + check_charts= + for chart in $active_charts + do + if [ "$chart" = "$chart_only" ] + then + check_charts="$chart" + break + fi + done + active_charts="$check_charts" +fi +debug "activated charts: $active_charts" + +# stop if we just need a pre-check +if [ $check -eq 1 ] +then + info "CHECK RESULT" + info "Will run the charts: $active_charts" + exit 0 +fi + +# ----------------------------------------------------------------------------- + +cd "${TMP_DIR}" || exit 1 + +# ----------------------------------------------------------------------------- +# create charts + +run_charts= +for chart in $active_charts +do + MODULE_NAME="${chart}" + + debug "calling '$chart$charts_create()'..." + $chart$charts_create + if [ $? -eq 0 ] + then + run_charts="$run_charts $chart" + debug "'$chart' initialized." + else + error "module's '$chart' function '$chart$charts_create()' reports failure." + fi +done +MODULE_NAME="main" +debug "run_charts='$run_charts'" + + +# ----------------------------------------------------------------------------- +# update dimensions + +[ -z "$run_charts" ] && fatal "No charts to collect data from." + +declare -A charts_last_update=() charts_update_every=() charts_retries=() charts_next_update=() charts_run_counter=() charts_serial_failures=() +global_update() { + local exit_at \ + c=0 dt ret last_ms exec_start_ms exec_end_ms \ + chart now_charts=() next_charts=($run_charts) \ + next_ms x seconds millis + + # return the current time in ms in $now_ms + ${current_time_ms} + + exit_at=$(( now_ms + (restart_timeout * 1000) )) + + for chart in $run_charts + do + eval "charts_update_every[$chart]=\$$chart$suffix_update_every" + test -z "${charts_update_every[$chart]}" && charts_update_every[$chart]=$update_every + + eval "charts_retries[$chart]=\$$chart$suffix_retries" + test -z "${charts_retries[$chart]}" && charts_retries[$chart]=10 + + charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000) ) )) + charts_next_update[$chart]=$(( charts_last_update[$chart] + (charts_update_every[$chart] * 1000) )) + charts_run_counter[$chart]=0 + charts_serial_failures[$chart]=0 + + echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" + echo "DIMENSION run_time 'run time' absolute 1 1" + done + + # the main loop + while [ "${#next_charts[@]}" -gt 0 ] + do + c=$((c + 1)) + now_charts=("${next_charts[@]}") + next_charts=() + + # return the current time in ms in $now_ms + ${current_time_ms} + + for chart in "${now_charts[@]}" + do + MODULE_NAME="${chart}" + + if [ ${now_ms} -ge ${charts_next_update[$chart]} ] + then + last_ms=${charts_last_update[$chart]} + dt=$(( (now_ms - last_ms) )) + + charts_last_update[$chart]=${now_ms} + + while [ ${charts_next_update[$chart]} -lt ${now_ms} ] + do + charts_next_update[$chart]=$(( charts_next_update[$chart] + (charts_update_every[$chart] * 1000) )) + done + + # the first call should not give a duration + # so that netdata calibrates to current time + dt=$(( dt * 1000 )) + charts_run_counter[$chart]=$(( charts_run_counter[$chart] + 1 )) + if [ ${charts_run_counter[$chart]} -eq 1 ] + then + dt= + fi + + exec_start_ms=$now_ms + $chart$charts_update $dt + ret=$? + + # return the current time in ms in $now_ms + ${current_time_ms}; exec_end_ms=$now_ms + + echo "BEGIN netdata.plugin_chartsd_$chart $dt" + echo "SET run_time = $(( exec_end_ms - exec_start_ms ))" + echo "END" + + if [ $ret -eq 0 ] + then + charts_serial_failures[$chart]=0 + next_charts+=($chart) + else + charts_serial_failures[$chart]=$(( charts_serial_failures[$chart] + 1 )) + + if [ ${charts_serial_failures[$chart]} -gt ${charts_retries[$chart]} ] + then + error "module's '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it." + else + error "module's '$chart' update() function reports failure. Will keep trying for a while." + next_charts+=($chart) + fi + fi + else + next_charts+=($chart) + fi + done + MODULE_NAME="${chart}" + + # wait the time you are required to + next_ms=$((now_ms + (update_every * 1000 * 100) )) + for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done + next_ms=$((next_ms - now_ms)) + + if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ] + then + next_ms=$(( next_ms + current_time_ms_accuracy )) + seconds=$(( next_ms / 1000 )) + millis=$(( next_ms % 1000 )) + if [ ${millis} -lt 10 ] + then + millis="00${millis}" + elif [ ${millis} -lt 100 ] + then + millis="0${millis}" + fi + + debug "sleeping for ${seconds}.${millis} seconds." + ${mysleep} ${seconds}.${millis} + else + debug "sleeping for ${update_every} seconds." + ${mysleep} $update_every + fi + + test ${now_ms} -ge ${exit_at} && exit 0 + done + + fatal "nothing left to do, exiting..." +} + +global_update diff --git a/collectors/charts.d.plugin/charts.d.plugin.in b/collectors/charts.d.plugin/charts.d.plugin.in new file mode 100755 index 000000000..3477894d8 --- /dev/null +++ b/collectors/charts.d.plugin/charts.d.plugin.in @@ -0,0 +1,743 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2017 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ +# +# charts.d.plugin allows easy development of BASH plugins +# +# if you need to run parallel charts.d processes, link this file to a different name +# in the same directory, with a .plugin suffix and netdata will start both of them, +# each will have a different config file and modules configuration directory. +# + +export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin" + +PROGRAM_FILE="$0" +PROGRAM_NAME="$(basename $0)" +PROGRAM_NAME="${PROGRAM_NAME/.plugin}" +MODULE_NAME="main" + +# ----------------------------------------------------------------------------- +# create temp dir + +debug=0 +TMP_DIR= +chartsd_cleanup() { + trap '' EXIT QUIT HUP INT TERM + + if [ ! -z "$TMP_DIR" -a -d "$TMP_DIR" ] + then + [ $debug -eq 1 ] && echo >&2 "$PROGRAM_NAME: cleaning up temporary directory $TMP_DIR ..." + rm -rf "$TMP_DIR" + fi + exit 0 +} +trap chartsd_cleanup EXIT QUIT HUP INT TERM + +if [ $UID = "0" ] +then + TMP_DIR="$( mktemp -d /var/run/netdata-${PROGRAM_NAME}-XXXXXXXXXX )" +else + TMP_DIR="$( mktemp -d /tmp/.netdata-${PROGRAM_NAME}-XXXXXXXXXX )" +fi + +logdate() { + date "+%Y-%m-%d %H:%M:%S" +} + +log() { + local status="${1}" + shift + + echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: ${*}" + +} + +warning() { + log WARNING "${@}" +} + +error() { + log ERROR "${@}" +} + +info() { + log INFO "${@}" +} + +fatal() { + log FATAL "${@}" + echo "DISABLE" + exit 1 +} + +debug() { + [ $debug -eq 1 ] && log DEBUG "${@}" +} + +# ----------------------------------------------------------------------------- +# check a few commands + +require_cmd() { + local x=$(which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null) + if [ -z "${x}" -o ! -x "${x}" ] + then + warning "command '${1}' is not found in ${PATH}." + eval "${1^^}_CMD=\"\"" + return 1 + fi + + eval "${1^^}_CMD=\"${x}\"" + return 0 +} + +require_cmd date || exit 1 +require_cmd sed || exit 1 +require_cmd basename || exit 1 +require_cmd dirname || exit 1 +require_cmd cat || exit 1 +require_cmd grep || exit 1 +require_cmd egrep || exit 1 +require_cmd mktemp || exit 1 +require_cmd awk || exit 1 +require_cmd timeout || exit 1 +require_cmd curl || exit 1 + +# ----------------------------------------------------------------------------- + +[ $(( ${BASH_VERSINFO[0]} )) -lt 4 ] && fatal "BASH version 4 or later is required, but found version: ${BASH_VERSION}. Please upgrade." + +info "started from '$PROGRAM_FILE' with options: $*" + +# ----------------------------------------------------------------------------- +# internal defaults +# netdata exposes a few environment variables for us + +[ -z "${NETDATA_PLUGINS_DIR}" ] && NETDATA_PLUGINS_DIR="$(dirname "${0}")" +[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="@configdir_POST@" +[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="@libconfigdir_POST@" + +pluginsd="${NETDATA_PLUGINS_DIR}" +stockconfd="${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}" +userconfd="${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}" +olduserconfd="${NETDATA_USER_CONFIG_DIR}" +chartsd="$pluginsd/../charts.d" + +minimum_update_frequency="${NETDATA_UPDATE_EVERY-1}" +update_every=${minimum_update_frequency} # this will be overwritten by the command line + +# work around for non BASH shells +charts_create="_create" +charts_update="_update" +charts_check="_check" +charts_undescore="_" + +# when making iterations, charts.d can loop more frequently +# to prevent plugins missing iterations. +# this is a percentage relative to update_every to align its +# iterations. +# The minimum is 10%, the maximum 100%. +# So, if update_every is 1 second and time_divisor is 50, +# charts.d will iterate every 500ms. +# Charts will be called to collect data only if the time +# passed since the last time the collected data is equal or +# above their update_every. +time_divisor=50 + +# number of seconds to run without restart +# after this time, charts.d.plugin will exit +# netdata will restart it +restart_timeout=$((3600 * 4)) + +# check if the charts.d plugins are using global variables +# they should not. +# It does not currently support BASH v4 arrays, so it is +# disabled +dryrunner=0 + +# check for timeout command +check_for_timeout=1 + +# the default enable/disable value for all charts +enable_all_charts="yes" + +# ----------------------------------------------------------------------------- +# parse parameters + +check=0 +chart_only= +while [ ! -z "$1" ] +do + if [ "$1" = "check" ] + then + check=1 + shift + continue + fi + + if [ "$1" = "debug" -o "$1" = "all" ] + then + debug=1 + shift + continue + fi + + if [ -f "$chartsd/$1.chart.sh" ] + then + debug=1 + chart_only="$( echo $1.chart.sh | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + if [ -f "$chartsd/$1" ] + then + debug=1 + chart_only="$( echo $1 | sed "s/\.chart\.sh$//g" )" + shift + continue + fi + + # number check + n="$1" + x=$(( n )) + if [ "$x" = "$n" ] + then + shift + update_every=$x + [ $update_every -lt $minimum_update_frequency ] && update_every=$minimum_update_frequency + continue + fi + + fatal "Cannot understand parameter $1. Aborting." +done + + +# ----------------------------------------------------------------------------- +# loop control + +# default sleep function +LOOPSLEEPMS_HIGHRES=0 +now_ms= +current_time_ms_default() { + now_ms="$(date +'%s')000" +} +current_time_ms="current_time_ms_default" +current_time_ms_accuracy=1 +mysleep="sleep" + +# if found and included, this file overwrites loopsleepms() +# and current_time_ms() with a high resolution timer function +# for precise looping. +source "$pluginsd/loopsleepms.sh.inc" +[ $? -ne 0 ] && error "Failed to load '$pluginsd/loopsleepms.sh.inc'." + +# ----------------------------------------------------------------------------- +# load my configuration + +for myconfig in "${NETDATA_STOCK_CONFIG_DIR}/${PROGRAM_NAME}.conf" "${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf" +do + if [ -f "$myconfig" ] + then + source "$myconfig" + if [ $? -ne 0 ] + then + error "Config file '$myconfig' loaded with errors." + else + info "Configuration file '$myconfig' loaded." + fi + else + warning "Configuration file '$myconfig' not found." + fi +done + +# make sure time_divisor is right +time_divisor=$((time_divisor)) +[ $time_divisor -lt 10 ] && time_divisor=10 +[ $time_divisor -gt 100 ] && time_divisor=100 + + +# we check for the timeout command, after we load our +# configuration, so that the user may overwrite the +# timeout command we use, providing a function that +# can emulate the timeout command we need: +# > timeout SECONDS command ... +if [ $check_for_timeout -eq 1 ] + then + require_cmd timeout || exit 1 +fi + +# ----------------------------------------------------------------------------- +# internal checks + +# netdata passes the requested update frequency as the first argument +update_every=$(( update_every + 1 - 1)) # makes sure it is a number +test $update_every -eq 0 && update_every=1 # if it is zero, make it 1 + +# check the charts.d directory +[ ! -d "$chartsd" ] && fatal "cannot find charts directory '$chartsd'" + +# ----------------------------------------------------------------------------- +# library functions + +fixid() { + echo "$*" |\ + tr -c "[A-Z][a-z][0-9]" "_" |\ + sed -e "s|^_\+||g" -e "s|_\+$||g" -e "s|_\+|_|g" |\ + tr "[A-Z]" "[a-z]" +} + +run() { + local ret pid="${BASHPID}" t + + if [ "z${1}" = "z-t" -a "${2}" != "0" ] + then + t="${2}" + shift 2 + timeout ${t} "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + else + "${@}" 2>"${TMP_DIR}/run.${pid}" + ret=$? + fi + + if [ ${ret} -ne 0 ] + then + { + printf "$(logdate): ${PROGRAM_NAME}: ${status}: ${MODULE_NAME}: command '" + printf "%q " "${@}" + printf "' failed with code ${ret}:\n --- BEGIN TRACE ---\n" + cat "${TMP_DIR}/run.${pid}" + printf " --- END TRACE ---\n" + } >&2 + fi + rm "${TMP_DIR}/run.${pid}" + + return ${ret} +} + +# convert any floating point number +# to integer, give a multiplier +# the result is stored in ${FLOAT2INT_RESULT} +# so that no fork is necessary +# the multiplier must be a power of 10 +float2int() { + local f m="$2" a b l v=($1) + f=${v[0]} + + # the length of the multiplier - 1 + l=$(( ${#m} - 1 )) + + # check if the number is in scientific notation + if [[ ${f} =~ ^[[:space:]]*(-)?[0-9.]+(e|E)(\+|-)[0-9]+ ]] + then + # convert it to decimal + # unfortunately, this fork cannot be avoided + # if you know of a way to avoid it, please let me know + f=$(printf "%0.${l}f" ${f}) + fi + + # split the floating point number + # in integer (a) and decimal (b) + a=${f/.*/} + b=${f/*./} + + # if the integer part is missing + # set it to zero + [ -z "${a}" ] && a="0" + + # strip leading zeros from the integer part + # base 10 convertion + a=$((10#$a)) + + # check the length of the decimal part + # against the length of the multiplier + if [ ${#b} -gt ${l} ] + then + # too many digits - take the most significant + b=${b:0:${l}} + + elif [ ${#b} -lt ${l} ] + then + # too few digits - pad with zero on the right + local z="00000000000000000000000" r=$((l - ${#b})) + b="${b}${z:0:${r}}" + fi + + # strip leading zeros from the decimal part + # base 10 convertion + b=$((10#$b)) + + # store the result + FLOAT2INT_RESULT=$(( (a * m) + b )) +} + + +# ----------------------------------------------------------------------------- +# charts check functions + +all_charts() { + cd "$chartsd" + [ $? -ne 0 ] && error "cannot cd to $chartsd" && return 1 + + ls *.chart.sh | sed "s/\.chart\.sh$//g" +} + +declare -A charts_enable_keyword=( + ['apache']="force" + ['cpu_apps']="force" + ['cpufreq']="force" + ['example']="force" + ['exim']="force" + ['hddtemp']="force" + ['load_average']="force" + ['mem_apps']="force" + ['mysql']="force" + ['nginx']="force" + ['phpfpm']="force" + ['postfix']="force" + ['sensors']="force" + ['squid']="force" + ['tomcat']="force" + ) + +all_enabled_charts() { + local charts= enabled= required= + + # find all enabled charts + + for chart in $( all_charts ) + do + MODULE_NAME="${chart}" + + eval "enabled=\$$chart" + if [ -z "${enabled}" ] + then + enabled="${enable_all_charts}" + fi + + required="${charts_enable_keyword[${chart}]}" + [ -z "${required}" ] && required="yes" + + if [ ! "${enabled}" = "${required}" ] + then + info "is disabled. Add a line with $chart=$required in '${NETDATA_USER_CONFIG_DIR}/${PROGRAM_NAME}.conf' to enable it (or remove the line that disables it)." + else + debug "is enabled for auto-detection." + local charts="$charts $chart" + fi + done + MODULE_NAME="main" + + local charts2= + for chart in $charts + do + MODULE_NAME="${chart}" + + # check the enabled charts + local check="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_check()" )" + if [ -z "$check" ] + then + error "module '$chart' does not seem to have a $chart$charts_check() function. Disabling it." + continue + fi + + local create="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_create()" )" + if [ -z "$create" ] + then + error "module '$chart' does not seem to have a $chart$charts_create() function. Disabling it." + continue + fi + + local update="$( cat "$chartsd/$chart.chart.sh" | sed "s/^ \+//g" | grep "^$chart$charts_update()" )" + if [ -z "$update" ] + then + error "module '$chart' does not seem to have a $chart$charts_update() function. Disabling it." + continue + fi + + # check its config + #if [ -f "$userconfd/$chart.conf" ] + #then + # if [ ! -z "$( cat "$userconfd/$chart.conf" | sed "s/^ \+//g" | grep -v "^$" | grep -v "^#" | grep -v "^$chart$charts_undescore" )" ] + # then + # error "module's $chart config $userconfd/$chart.conf should only have lines starting with $chart$charts_undescore . Disabling it." + # continue + # fi + #fi + + #if [ $dryrunner -eq 1 ] + # then + # "$pluginsd/charts.d.dryrun-helper.sh" "$chart" "$chartsd/$chart.chart.sh" "$userconfd/$chart.conf" >/dev/null + # if [ $? -ne 0 ] + # then + # error "module's $chart did not pass the dry run check. This means it uses global variables not starting with $chart. Disabling it." + # continue + # fi + #fi + + local charts2="$charts2 $chart" + done + MODULE_NAME="main" + + echo $charts2 + debug "enabled charts: $charts2" +} + +# ----------------------------------------------------------------------------- +# load the charts + +suffix_retries="_retries" +suffix_update_every="_update_every" +active_charts= +for chart in $( all_enabled_charts ) +do + MODULE_NAME="${chart}" + + debug "loading module: '$chartsd/$chart.chart.sh'" + + source "$chartsd/$chart.chart.sh" + [ $? -ne 0 ] && warning "Module '$chartsd/$chart.chart.sh' loaded with errors." + + # first load the stock config + if [ -f "$stockconfd/$chart.conf" ] + then + debug "loading module configuration: '$stockconfd/$chart.conf'" + source "$stockconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$stockconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$stockconfd/$chart.conf'" + fi + + # then load the user config (it overwrites the stock) + if [ -f "$userconfd/$chart.conf" ] + then + debug "loading module configuration: '$userconfd/$chart.conf'" + source "$userconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$userconfd/$chart.conf' loaded with errors." + else + debug "not found module configuration: '$userconfd/$chart.conf'" + + if [ -f "$olduserconfd/$chart.conf" ] + then + # support for very old netdata that had the charts.d module configs in /etc/netdata + info "loading module configuration from obsolete location: '$olduserconfd/$chart.conf'" + source "$olduserconfd/$chart.conf" + [ $? -ne 0 ] && warning "Config file '$olduserconfd/$chart.conf' loaded with errors." + fi + fi + + eval "dt=\$$chart$suffix_update_every" + dt=$(( dt + 1 - 1 )) # make sure it is a number + if [ $dt -lt $update_every ] + then + eval "$chart$suffix_update_every=$update_every" + fi + + $chart$charts_check + if [ $? -eq 0 ] + then + debug "module '$chart' activated" + active_charts="$active_charts $chart" + else + error "module's '$chart' check() function reports failure." + fi +done +MODULE_NAME="main" +debug "activated modules: $active_charts" + + +# ----------------------------------------------------------------------------- +# check overwrites + +# enable work time reporting +debug_time= +test $debug -eq 1 && debug_time=tellwork + +# if we only need a specific chart, remove all the others +if [ ! -z "${chart_only}" ] +then + debug "requested to run only for: '${chart_only}'" + check_charts= + for chart in $active_charts + do + if [ "$chart" = "$chart_only" ] + then + check_charts="$chart" + break + fi + done + active_charts="$check_charts" +fi +debug "activated charts: $active_charts" + +# stop if we just need a pre-check +if [ $check -eq 1 ] +then + info "CHECK RESULT" + info "Will run the charts: $active_charts" + exit 0 +fi + +# ----------------------------------------------------------------------------- + +cd "${TMP_DIR}" || exit 1 + +# ----------------------------------------------------------------------------- +# create charts + +run_charts= +for chart in $active_charts +do + MODULE_NAME="${chart}" + + debug "calling '$chart$charts_create()'..." + $chart$charts_create + if [ $? -eq 0 ] + then + run_charts="$run_charts $chart" + debug "'$chart' initialized." + else + error "module's '$chart' function '$chart$charts_create()' reports failure." + fi +done +MODULE_NAME="main" +debug "run_charts='$run_charts'" + + +# ----------------------------------------------------------------------------- +# update dimensions + +[ -z "$run_charts" ] && fatal "No charts to collect data from." + +declare -A charts_last_update=() charts_update_every=() charts_retries=() charts_next_update=() charts_run_counter=() charts_serial_failures=() +global_update() { + local exit_at \ + c=0 dt ret last_ms exec_start_ms exec_end_ms \ + chart now_charts=() next_charts=($run_charts) \ + next_ms x seconds millis + + # return the current time in ms in $now_ms + ${current_time_ms} + + exit_at=$(( now_ms + (restart_timeout * 1000) )) + + for chart in $run_charts + do + eval "charts_update_every[$chart]=\$$chart$suffix_update_every" + test -z "${charts_update_every[$chart]}" && charts_update_every[$chart]=$update_every + + eval "charts_retries[$chart]=\$$chart$suffix_retries" + test -z "${charts_retries[$chart]}" && charts_retries[$chart]=10 + + charts_last_update[$chart]=$((now_ms - (now_ms % (charts_update_every[$chart] * 1000) ) )) + charts_next_update[$chart]=$(( charts_last_update[$chart] + (charts_update_every[$chart] * 1000) )) + charts_run_counter[$chart]=0 + charts_serial_failures[$chart]=0 + + echo "CHART netdata.plugin_chartsd_$chart '' 'Execution time for $chart plugin' 'milliseconds / run' charts.d netdata.plugin_charts area 145000 ${charts_update_every[$chart]}" + echo "DIMENSION run_time 'run time' absolute 1 1" + done + + # the main loop + while [ "${#next_charts[@]}" -gt 0 ] + do + c=$((c + 1)) + now_charts=("${next_charts[@]}") + next_charts=() + + # return the current time in ms in $now_ms + ${current_time_ms} + + for chart in "${now_charts[@]}" + do + MODULE_NAME="${chart}" + + if [ ${now_ms} -ge ${charts_next_update[$chart]} ] + then + last_ms=${charts_last_update[$chart]} + dt=$(( (now_ms - last_ms) )) + + charts_last_update[$chart]=${now_ms} + + while [ ${charts_next_update[$chart]} -lt ${now_ms} ] + do + charts_next_update[$chart]=$(( charts_next_update[$chart] + (charts_update_every[$chart] * 1000) )) + done + + # the first call should not give a duration + # so that netdata calibrates to current time + dt=$(( dt * 1000 )) + charts_run_counter[$chart]=$(( charts_run_counter[$chart] + 1 )) + if [ ${charts_run_counter[$chart]} -eq 1 ] + then + dt= + fi + + exec_start_ms=$now_ms + $chart$charts_update $dt + ret=$? + + # return the current time in ms in $now_ms + ${current_time_ms}; exec_end_ms=$now_ms + + echo "BEGIN netdata.plugin_chartsd_$chart $dt" + echo "SET run_time = $(( exec_end_ms - exec_start_ms ))" + echo "END" + + if [ $ret -eq 0 ] + then + charts_serial_failures[$chart]=0 + next_charts+=($chart) + else + charts_serial_failures[$chart]=$(( charts_serial_failures[$chart] + 1 )) + + if [ ${charts_serial_failures[$chart]} -gt ${charts_retries[$chart]} ] + then + error "module's '$chart' update() function reported failure ${charts_serial_failures[$chart]} times. Disabling it." + else + error "module's '$chart' update() function reports failure. Will keep trying for a while." + next_charts+=($chart) + fi + fi + else + next_charts+=($chart) + fi + done + MODULE_NAME="${chart}" + + # wait the time you are required to + next_ms=$((now_ms + (update_every * 1000 * 100) )) + for x in "${charts_next_update[@]}"; do [ ${x} -lt ${next_ms} ] && next_ms=${x}; done + next_ms=$((next_ms - now_ms)) + + if [ ${LOOPSLEEPMS_HIGHRES} -eq 1 -a ${next_ms} -gt 0 ] + then + next_ms=$(( next_ms + current_time_ms_accuracy )) + seconds=$(( next_ms / 1000 )) + millis=$(( next_ms % 1000 )) + if [ ${millis} -lt 10 ] + then + millis="00${millis}" + elif [ ${millis} -lt 100 ] + then + millis="0${millis}" + fi + + debug "sleeping for ${seconds}.${millis} seconds." + ${mysleep} ${seconds}.${millis} + else + debug "sleeping for ${update_every} seconds." + ${mysleep} $update_every + fi + + test ${now_ms} -ge ${exit_at} && exit 0 + done + + fatal "nothing left to do, exiting..." +} + +global_update diff --git a/collectors/charts.d.plugin/cpu_apps/Makefile.inc b/collectors/charts.d.plugin/cpu_apps/Makefile.inc new file mode 100644 index 000000000..a35f82837 --- /dev/null +++ b/collectors/charts.d.plugin/cpu_apps/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += cpu_apps/cpu_apps.chart.sh +dist_chartsconfig_DATA += cpu_apps/cpu_apps.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += cpu_apps/README.md cpu_apps/Makefile.inc + diff --git a/collectors/charts.d.plugin/cpu_apps/README.md b/collectors/charts.d.plugin/cpu_apps/README.md new file mode 100644 index 000000000..cd8adf0a2 --- /dev/null +++ b/collectors/charts.d.plugin/cpu_apps/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE APPS.PLUGIN. diff --git a/collectors/charts.d.plugin/cpu_apps/cpu_apps.chart.sh b/collectors/charts.d.plugin/cpu_apps/cpu_apps.chart.sh new file mode 100644 index 000000000..869464afe --- /dev/null +++ b/collectors/charts.d.plugin/cpu_apps/cpu_apps.chart.sh @@ -0,0 +1,72 @@ +# shellcheck shell=bash disable=SC2154,SC1072,SC1073,SC2009,SC2162,SC2006,SC2002,SC2086,SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# +# THIS PLUGIN IS OBSOLETE +# USE apps.plugin INSTEAD + +# a space separated list of command to monitor +cpu_apps_apps= + +# these are required for computing memory in bytes and cpu in seconds +#cpu_apps_pagesize="`getconf PAGESIZE`" +cpu_apps_clockticks="$(getconf CLK_TCK)" + +cpu_apps_update_every=60 + +cpu_apps_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + if [ -z "$cpu_apps_apps" ] + then + error "manual configuration required: please set cpu_apps_apps='command1 command2 ...' in $confd/cpu_apps_apps.conf" + return 1 + fi + return 0 +} + +cpu_apps_bc_finalze= + +cpu_apps_create() { + + echo "CHART chartsd_apps.cpu '' 'Apps CPU' 'milliseconds / $cpu_apps_update_every sec' apps apps stacked 20001 $cpu_apps_update_every" + + local x= + for x in $cpu_apps_apps + do + echo "DIMENSION $x $x incremental 1000 $cpu_apps_clockticks" + + # this string is needed later in the update() function + # to finalize the instructions for the bc command + cpu_apps_bc_finalze="$cpu_apps_bc_finalze \"SET $x = \"; $x;" + done + return 0 +} + +cpu_apps_update() { + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + echo "BEGIN chartsd_apps.cpu" + ps -o pid,comm -C "$cpu_apps_apps" |\ + grep -v "COMMAND" |\ + ( + while read pid name + do + echo "$name+=`cat /proc/$pid/stat | cut -d ' ' -f 14-15`" + done + ) |\ + ( sed -e "s/ \+/ /g" -e "s/ /+/g"; + echo "$cpu_apps_bc_finalze" + ) | bc + echo "END" + + return 0 +} diff --git a/collectors/charts.d.plugin/cpu_apps/cpu_apps.conf b/collectors/charts.d.plugin/cpu_apps/cpu_apps.conf new file mode 100644 index 000000000..850cd0c6f --- /dev/null +++ b/collectors/charts.d.plugin/cpu_apps/cpu_apps.conf @@ -0,0 +1,19 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# app.plugin can do better + +#cpu_apps_apps= + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#cpu_apps_update_every=2 + +# the number of retries to do in case of failure +# before disabling the module +#cpu_apps_retries=10 diff --git a/collectors/charts.d.plugin/cpufreq/Makefile.inc b/collectors/charts.d.plugin/cpufreq/Makefile.inc new file mode 100644 index 000000000..682379133 --- /dev/null +++ b/collectors/charts.d.plugin/cpufreq/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += cpufreq/cpufreq.chart.sh +dist_chartsconfig_DATA += cpufreq/cpufreq.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += cpufreq/README.md cpufreq/Makefile.inc + diff --git a/collectors/charts.d.plugin/cpufreq/README.md b/collectors/charts.d.plugin/cpufreq/README.md new file mode 100644 index 000000000..d82951aac --- /dev/null +++ b/collectors/charts.d.plugin/cpufreq/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT diff --git a/collectors/charts.d.plugin/cpufreq/cpufreq.chart.sh b/collectors/charts.d.plugin/cpufreq/cpufreq.chart.sh new file mode 100644 index 000000000..1fc6caabf --- /dev/null +++ b/collectors/charts.d.plugin/cpufreq/cpufreq.chart.sh @@ -0,0 +1,90 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# if this chart is called X.chart.sh, then all functions and global variables +# must start with X_ + +cpufreq_sys_dir="${NETDATA_HOST_PREFIX}/sys/devices" +cpufreq_sys_depth=10 +cpufreq_source_update=1 + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +cpufreq_update_every= +cpufreq_priority=10000 + +cpufreq_find_all_files() { + find "$1" -maxdepth $cpufreq_sys_depth -name scaling_cur_freq 2>/dev/null +} + +# _check is called once, to find out if this chart should be enabled or not +cpufreq_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + [ -z "$( cpufreq_find_all_files "$cpufreq_sys_dir" )" ] && return 1 + return 0 +} + +# _create is called once, to create the charts +cpufreq_create() { + local dir file id i + + # we create a script with the source of the + # cpufreq_update() function + # - the highest speed we can achieve - + [ $cpufreq_source_update -eq 1 ] && echo >"$TMP_DIR/cpufreq.sh" "cpufreq_update() {" + + echo "CHART cpu.cpufreq '' 'CPU Clock' 'MHz' 'cpufreq' '' line $((cpufreq_priority + 1)) $cpufreq_update_every" + echo >>"$TMP_DIR/cpufreq.sh" "echo \"BEGIN cpu.cpufreq \$1\"" + + i=0 + for file in $( cpufreq_find_all_files "$cpufreq_sys_dir" | sort -u ) + do + i=$(( i + 1 )) + dir=$( dirname "$file" ) + cpu= + + [ -f "$dir/affected_cpus" ] && cpu=$( cat "$dir/affected_cpus" ) + [ -z "$cpu" ] && cpu="$i.a" + + id="$( fixid "cpu$cpu" )" + + debug "file='$file', dir='$dir', cpu='$cpu', id='$id'" + + echo "DIMENSION $id '$id' absolute 1 1000" + echo >>"$TMP_DIR/cpufreq.sh" "echo \"SET $id = \"\$(< $file )" + done + echo >>"$TMP_DIR/cpufreq.sh" "echo END" + + [ $cpufreq_source_update -eq 1 ] && echo >>"$TMP_DIR/cpufreq.sh" "}" + + # ok, load the function cpufreq_update() we created + # shellcheck disable=SC1090 + [ $cpufreq_source_update -eq 1 ] && . "$TMP_DIR/cpufreq.sh" + + return 0 +} + +# _update is called continuously, to collect the values +cpufreq_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + # shellcheck disable=SC1090 + [ $cpufreq_source_update -eq 0 ] && . "$TMP_DIR/cpufreq.sh" "$1" + + return 0 +} + diff --git a/collectors/charts.d.plugin/cpufreq/cpufreq.conf b/collectors/charts.d.plugin/cpufreq/cpufreq.conf new file mode 100644 index 000000000..7130555af --- /dev/null +++ b/collectors/charts.d.plugin/cpufreq/cpufreq.conf @@ -0,0 +1,24 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +#cpufreq_sys_dir="/sys/devices" +#cpufreq_sys_depth=10 +#cpufreq_source_update=1 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#cpufreq_update_every= + +# the charts priority on the dashboard +#cpufreq_priority=10000 + +# the number of retries to do in case of failure +# before disabling the module +#cpufreq_retries=10 diff --git a/collectors/charts.d.plugin/example/Makefile.inc b/collectors/charts.d.plugin/example/Makefile.inc new file mode 100644 index 000000000..e6838fbbe --- /dev/null +++ b/collectors/charts.d.plugin/example/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += example/example.chart.sh +dist_chartsconfig_DATA += example/example.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += example/README.md example/Makefile.inc + diff --git a/collectors/charts.d.plugin/example/README.md b/collectors/charts.d.plugin/example/README.md new file mode 100644 index 000000000..bfd5e210a --- /dev/null +++ b/collectors/charts.d.plugin/example/README.md @@ -0,0 +1,2 @@ +This is just an example charts.d data collector. + diff --git a/collectors/charts.d.plugin/example/example.chart.sh b/collectors/charts.d.plugin/example/example.chart.sh new file mode 100644 index 000000000..1562c597a --- /dev/null +++ b/collectors/charts.d.plugin/example/example.chart.sh @@ -0,0 +1,126 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# if this chart is called X.chart.sh, then all functions and global variables +# must start with X_ + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +example_update_every= + +# the priority is used to sort the charts on the dashboard +# 1 = the first chart +example_priority=150000 + +# to enable this chart, you have to set this to 12345 +# (just a demonstration for something that needs to be checked) +example_magic_number= + +# global variables to store our collected data +# remember: they need to start with the module name example_ +example_value1= +example_value2= +example_value3= +example_value4= +example_last=0 +example_count=0 + +example_get() { + # do all the work to collect / calculate the values + # for each dimension + # + # Remember: + # 1. KEEP IT SIMPLE AND SHORT + # 2. AVOID FORKS (avoid piping commands) + # 3. AVOID CALLING TOO MANY EXTERNAL PROGRAMS + # 4. USE LOCAL VARIABLES (global variables may overlap with other modules) + + example_value1=$RANDOM + example_value2=$RANDOM + example_value3=$RANDOM + example_value4=$((8192 + (RANDOM * 16383 / 32767) )) + + if [ $example_count -gt 0 ] + then + example_count=$((example_count - 1)) + + [ $example_last -gt 16383 ] && example_value4=$((example_last + (RANDOM * ( (32767 - example_last) / 2) / 32767))) + [ $example_last -le 16383 ] && example_value4=$((example_last - (RANDOM * (example_last / 2) / 32767))) + else + example_count=$((1 + (RANDOM * 5 / 32767) )) + + if [ $example_last -gt 16383 ] && [ $example_value4 -gt 16383 ] + then + example_value4=$((example_value4 - 16383)) + fi + if [ $example_last -le 16383 ] && [ $example_value4 -lt 16383 ] + then + example_value4=$((example_value4 + 16383)) + fi + fi + example_last=$example_value4 + + # this should return: + # - 0 to send the data to netdata + # - 1 to report a failure to collect the data + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +example_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + # check something + [ "${example_magic_number}" != "12345" ] && error "manual configuration required: you have to set example_magic_number=$example_magic_number in example.conf to start example chart." && return 1 + + # check that we can collect data + example_get || return 1 + + return 0 +} + +# _create is called once, to create the charts +example_create() { + # create the chart with 3 dimensions + cat <<EOF +CHART example.random '' "Random Numbers Stacked Chart" "% of random numbers" random random stacked $((example_priority)) $example_update_every +DIMENSION random1 '' percentage-of-absolute-row 1 1 +DIMENSION random2 '' percentage-of-absolute-row 1 1 +DIMENSION random3 '' percentage-of-absolute-row 1 1 +CHART example.random2 '' "A random number" "random number" random random area $((example_priority + 1)) $example_update_every +DIMENSION random '' absolute 1 1 +EOF + + return 0 +} + +# _update is called continuously, to collect the values +example_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + example_get || return 1 + + # write the result of the work. + cat <<VALUESEOF +BEGIN example.random $1 +SET random1 = $example_value1 +SET random2 = $example_value2 +SET random3 = $example_value3 +END +BEGIN example.random2 $1 +SET random = $example_value4 +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/example/example.conf b/collectors/charts.d.plugin/example/example.conf new file mode 100644 index 000000000..6232ca584 --- /dev/null +++ b/collectors/charts.d.plugin/example/example.conf @@ -0,0 +1,21 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# to enable this chart, you have to set this to 12345 +# (just a demonstration for something that needs to be checked) +#example_magic_number=12345 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#example_update_every= + +# the charts priority on the dashboard +#example_priority=150000 + +# the number of retries to do in case of failure +# before disabling the module +#example_retries=10 diff --git a/collectors/charts.d.plugin/exim/Makefile.inc b/collectors/charts.d.plugin/exim/Makefile.inc new file mode 100644 index 000000000..ca2112a80 --- /dev/null +++ b/collectors/charts.d.plugin/exim/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += exim/exim.chart.sh +dist_chartsconfig_DATA += exim/exim.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += exim/README.md exim/Makefile.inc + diff --git a/collectors/charts.d.plugin/exim/README.md b/collectors/charts.d.plugin/exim/README.md new file mode 100644 index 000000000..d82951aac --- /dev/null +++ b/collectors/charts.d.plugin/exim/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT diff --git a/collectors/charts.d.plugin/exim/exim.chart.sh b/collectors/charts.d.plugin/exim/exim.chart.sh new file mode 100644 index 000000000..8099a7249 --- /dev/null +++ b/collectors/charts.d.plugin/exim/exim.chart.sh @@ -0,0 +1,48 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# +# Contributed by @jsveiga with PR #480 + +# the exim command to run +exim_command= + +# how frequently to collect queue size +exim_update_every=5 + +exim_priority=60000 + +exim_check() { + if [ -z "${exim_command}" ] + then + require_cmd exim || return 1 + exim_command="${EXIM_CMD}" + fi + + if [ "$(${exim_command} -bpc 2>&1 | grep -c denied)" -ne 0 ] + then + error "permission denied - please set 'queue_list_requires_admin = false' in your exim options file" + return 1 + fi + + return 0 +} + +exim_create() { + cat <<EOF +CHART exim_local.qemails '' "Exim Queue Emails" "emails" queue exim.queued.emails line $((exim_priority + 1)) $exim_update_every +DIMENSION emails '' absolute 1 1 +EOF + return 0 +} + +exim_update() { + echo "BEGIN exim_local.qemails $1" + echo "SET emails = $(run "${exim_command}" -bpc)" + echo "END" + return 0 +} diff --git a/collectors/charts.d.plugin/exim/exim.conf b/collectors/charts.d.plugin/exim/exim.conf new file mode 100644 index 000000000..f96ac4dbb --- /dev/null +++ b/collectors/charts.d.plugin/exim/exim.conf @@ -0,0 +1,24 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# the exim command to run +# if empty, it will use the one found in the system path +#exim_command= + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#exim_update_every=5 + +# the charts priority on the dashboard +#exim_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#exim_retries=10 diff --git a/collectors/charts.d.plugin/hddtemp/Makefile.inc b/collectors/charts.d.plugin/hddtemp/Makefile.inc new file mode 100644 index 000000000..2bd29e5b1 --- /dev/null +++ b/collectors/charts.d.plugin/hddtemp/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += hddtemp/hddtemp.chart.sh +dist_chartsconfig_DATA += hddtemp/hddtemp.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += hddtemp/README.md hddtemp/Makefile.inc + diff --git a/collectors/charts.d.plugin/hddtemp/README.md b/collectors/charts.d.plugin/hddtemp/README.md new file mode 100644 index 000000000..98f18900c --- /dev/null +++ b/collectors/charts.d.plugin/hddtemp/README.md @@ -0,0 +1,28 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + +# hddtemp + +The plugin will collect temperatures from disks + +It will create one chart with all active disks + +1. **temperature in Celsius** + +### configuration + +hddtemp needs to be running in daemonized mode + +```sh +# host with daemonized hddtemp +hddtemp_host="localhost" + +# port on which hddtemp is showing data +hddtemp_port="7634" + +# array of included disks +# the default is to include all +hddtemp_disks=() +``` + +--- diff --git a/collectors/charts.d.plugin/hddtemp/hddtemp.chart.sh b/collectors/charts.d.plugin/hddtemp/hddtemp.chart.sh new file mode 100644 index 000000000..e90310981 --- /dev/null +++ b/collectors/charts.d.plugin/hddtemp/hddtemp.chart.sh @@ -0,0 +1,77 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# +# contributed by @paulfantom with PR #511 + +# if this chart is called X.chart.sh, then all functions and global variables +# must start with X_ +hddtemp_host="localhost" +hddtemp_port="7634" +declare -A hddtemp_disks=() + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +hddtemp_update_every=3 +hddtemp_priority=90000 + +# _check is called once, to find out if this chart should be enabled or not +hddtemp_check() { + require_cmd nc || return 1 + run nc $hddtemp_host $hddtemp_port && return 0 || return 1 +} + +# _create is called once, to create the charts +hddtemp_create() { + if [ ${#hddtemp_disks[@]} -eq 0 ]; then + local all + all=$(nc $hddtemp_host $hddtemp_port ) + unset hddtemp_disks + # shellcheck disable=SC2190,SC2207 + hddtemp_disks=( $(grep -Po '/dev/[^|]+' <<< "$all" | cut -c 6-) ) + fi +# local disk_names +# disk_names=(`sed -e 's/||/\n/g;s/^|//' <<< "$all" | cut -d '|' -f2 | tr ' ' '_'`) + + echo "CHART hddtemp.temperature 'disks_temp' 'temperature' 'Celsius' 'Disks temperature' 'hddtemp.temp' line $((hddtemp_priority)) $hddtemp_update_every" + for i in $(seq 0 $((${#hddtemp_disks[@]}-1))); do +# echo "DIMENSION ${hddtemp_disks[i]} ${disk_names[i]} absolute 1 1" + echo "DIMENSION ${hddtemp_disks[$i]} '' absolute 1 1" + done + return 0 +} + +# _update is called continuously, to collect the values +#hddtemp_last=0 +#hddtemp_count=0 +hddtemp_update() { +# local all=( `nc $hddtemp_host $hddtemp_port | sed -e 's/||/\n/g;s/^|//' | cut -d '|' -f3` ) +# local all=( `nc $hddtemp_host $hddtemp_port | awk 'BEGIN { FS="|" };{i=4; while (i <= NF) {print $i+0;i+=5;};}'` ) + OLD_IFS=$IFS + set -f + # shellcheck disable=SC2207 + IFS="|" all=( $(nc $hddtemp_host $hddtemp_port 2>/dev/null) ) + set +f + IFS=$OLD_IFS + + # check if there is some data + if [ -z "${all[3]}" ]; then + return 1 + fi + + # write the result of the work. + echo "BEGIN hddtemp.temperature $1" + end=${#hddtemp_disks[@]} + for ((i=0; i<end; i++)); do + # temperature - this will turn SLP to zero + t=$(( ${all[ $((i * 5 + 3)) ]} )) + echo "SET ${hddtemp_disks[$i]} = $t" + done + echo "END" + + return 0 +} diff --git a/collectors/charts.d.plugin/hddtemp/hddtemp.conf b/collectors/charts.d.plugin/hddtemp/hddtemp.conf new file mode 100644 index 000000000..b6037b40e --- /dev/null +++ b/collectors/charts.d.plugin/hddtemp/hddtemp.conf @@ -0,0 +1,23 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +#hddtemp_host="localhost" +#hddtemp_port="7634" + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#hddtemp_update_every=3 + +# the charts priority on the dashboard +#hddtemp_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#hddtemp_retries=10 diff --git a/collectors/charts.d.plugin/libreswan/Makefile.inc b/collectors/charts.d.plugin/libreswan/Makefile.inc new file mode 100644 index 000000000..af767d0dd --- /dev/null +++ b/collectors/charts.d.plugin/libreswan/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += libreswan/libreswan.chart.sh +dist_chartsconfig_DATA += libreswan/libreswan.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += libreswan/README.md libreswan/Makefile.inc + diff --git a/collectors/charts.d.plugin/libreswan/README.md b/collectors/charts.d.plugin/libreswan/README.md new file mode 100644 index 000000000..41026cf72 --- /dev/null +++ b/collectors/charts.d.plugin/libreswan/README.md @@ -0,0 +1,42 @@ +# libreswan + +The plugin will collects bytes-in, bytes-out and uptime for all established libreswan IPSEC tunnels. + +The following charts are created, **per tunnel**: + +1. **Uptime** + + * the uptime of the tunnel + +2. **Traffic** + + * bytes in + * bytes out + +### configuration + +Its config file is `/etc/netdata/charts.d/libreswan.conf`. + +The plugin executes 2 commands to collect all the information it needs: + +```sh +ipsec whack --status +ipsec whack --trafficstatus +``` + +The first command is used to extract the currently established tunnels, their IDs and their names. +The second command is used to extract the current uptime and traffic. + +Most probably user `netdata` will not be able to query libreswan, so the `ipsec` commands will be denied. +The plugin attempts to run `ipsec` as `sudo ipsec ...`, to get access to libreswan statistics. + +To allow user `netdata` execute `sudo ipsec ...`, create the file `/etc/sudoers.d/netdata` with this content: + +``` +netdata ALL = (root) NOPASSWD: /sbin/ipsec whack --status +netdata ALL = (root) NOPASSWD: /sbin/ipsec whack --trafficstatus +``` + +Make sure the path `/sbin/ipsec` matches your setup (execute `which ipsec` to find the right path). + +--- diff --git a/collectors/charts.d.plugin/libreswan/libreswan.chart.sh b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh new file mode 100644 index 000000000..6e29f8473 --- /dev/null +++ b/collectors/charts.d.plugin/libreswan/libreswan.chart.sh @@ -0,0 +1,176 @@ +# shellcheck shell=bash disable=SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +libreswan_update_every=1 + +# the priority is used to sort the charts on the dashboard +# 1 = the first chart +libreswan_priority=90000 + +# set to 1, to run ipsec with sudo +libreswan_sudo=1 + +# global variables to store our collected data + +# [TUNNELID] = TUNNELNAME +# here we track the *latest* established tunnels +# as detected by: ipsec whack --status +declare -A libreswan_connected_tunnels=() + +# [TUNNELID] = VALUE +# here we track values of all established tunnels (not only the latest) +# as detected by: ipsec whack --trafficstatus +declare -A libreswan_traffic_in=() +declare -A libreswan_traffic_out=() +declare -A libreswan_established_add_time=() + +# [TUNNELNAME] = CHARTID +# here we remember CHARTIDs of all tunnels +# we need this to avoid converting tunnel names to chart IDs on every iteration +declare -A libreswan_tunnel_charts=() + +# run the ipsec command +libreswan_ipsec() { + if [ ${libreswan_sudo} -ne 0 ] + then + sudo -n "${IPSEC_CMD}" "${@}" + return $? + else + "${IPSEC_CMD}" "${@}" + return $? + fi +} + +# fetch latest values - fill the arrays +libreswan_get() { + # do all the work to collect / calculate the values + # for each dimension + + # empty the variables + libreswan_traffic_in=() + libreswan_traffic_out=() + libreswan_established_add_time=() + libreswan_connected_tunnels=() + + # convert the ipsec command output to a shell script + # and source it to get the values + # shellcheck disable=SC1090 + source <( + { + libreswan_ipsec whack --status; + libreswan_ipsec whack --trafficstatus; + } | sed -n \ + -e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\".*IPsec SA established.*newest IPSEC.*|libreswan_connected_tunnels[\"\1\"]=\"\2\"|p" \ + -e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\",.* add_time=\([0-9]\+\),.* inBytes=\([0-9]\+\),.* outBytes=\([0-9]\+\).*|libreswan_traffic_in[\"\1\"]=\"\4\"; libreswan_traffic_out[\"\1\"]=\"\5\"; libreswan_established_add_time[\"\1\"]=\"\3\";|p" + ) || return 1 + + # check we got some data + [ ${#libreswan_connected_tunnels[@]} -eq 0 ] && return 1 + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +libreswan_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + require_cmd ipsec || return 1 + + # make sure it is libreswan + # shellcheck disable=SC2143 + if [ -z "$(ipsec --version | grep -i libreswan)" ] + then + error "ipsec command is not Libreswan. Disabling Libreswan plugin." + return 1 + fi + + # check that we can collect data + libreswan_get || return 1 + + return 0 +} + +# create the charts for an ipsec tunnel +libreswan_create_one() { + local n="${1}" name + + name="${libreswan_connected_tunnels[${n}]}" + + [ ! -z "${libreswan_tunnel_charts[${name}]}" ] && return 0 + + libreswan_tunnel_charts[${name}]="$(fixid "${name}")" + + cat <<EOF +CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every +DIMENSION in '' incremental 8 1000 +DIMENSION out '' incremental -8 1000 +CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every +DIMENSION uptime '' absolute 1 1 +EOF + + return 0 + +} + +# _create is called once, to create the charts +libreswan_create() { + local n + for n in "${!libreswan_connected_tunnels[@]}" + do + libreswan_create_one "${n}" + done + return 0 +} + +libreswan_now=$(date +%s) + +# send the values to netdata for an ipsec tunnel +libreswan_update_one() { + local n="${1}" microseconds="${2}" name id uptime + + name="${libreswan_connected_tunnels[${n}]}" + id="${libreswan_tunnel_charts[${name}]}" + + [ -z "${id}" ] && libreswan_create_one "${name}" + + uptime=$(( libreswan_now - libreswan_established_add_time[${n}] )) + [ ${uptime} -lt 0 ] && uptime=0 + + # write the result of the work. + cat <<VALUESEOF +BEGIN libreswan.${id}_net ${microseconds} +SET in = ${libreswan_traffic_in[${n}]} +SET out = ${libreswan_traffic_out[${n}]} +END +BEGIN libreswan.${id}_uptime ${microseconds} +SET uptime = ${uptime} +END +VALUESEOF +} + +# _update is called continiously, to collect the values +libreswan_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + libreswan_get || return 1 + libreswan_now=$(date +%s) + + local n + for n in "${!libreswan_connected_tunnels[@]}" + do + libreswan_update_one "${n}" "${@}" + done + + return 0 +} diff --git a/collectors/charts.d.plugin/libreswan/libreswan.conf b/collectors/charts.d.plugin/libreswan/libreswan.conf new file mode 100644 index 000000000..9b3ee77b7 --- /dev/null +++ b/collectors/charts.d.plugin/libreswan/libreswan.conf @@ -0,0 +1,29 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ +# + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#libreswan_update_every=1 + +# the charts priority on the dashboard +#libreswan_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#libreswan_retries=10 + +# set to 1, to run ipsec with sudo (the default) +# set to 0, to run ipsec without sudo +#libreswan_sudo=1 + +# TO ALLOW NETDATA RUN ipsec AS ROOT +# CREATE THE FILE: /etc/sudoers.d/netdata +# WITH THESE 2 LINES (uncommented of course): +# +# netdata ALL = (root) NOPASSWD: /sbin/ipsec whack --status +# netdata ALL = (root) NOPASSWD: /sbin/ipsec whack --trafficstatus diff --git a/collectors/charts.d.plugin/load_average/Makefile.inc b/collectors/charts.d.plugin/load_average/Makefile.inc new file mode 100644 index 000000000..e5a481bf4 --- /dev/null +++ b/collectors/charts.d.plugin/load_average/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += load_average/load_average.chart.sh +dist_chartsconfig_DATA += load_average/load_average.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += load_average/README.md load_average/Makefile.inc + diff --git a/collectors/charts.d.plugin/load_average/README.md b/collectors/charts.d.plugin/load_average/README.md new file mode 100644 index 000000000..39d3b8189 --- /dev/null +++ b/collectors/charts.d.plugin/load_average/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> THE NETDATA DAEMON COLLECTS LOAD AVERAGE BY ITSELF diff --git a/collectors/charts.d.plugin/load_average/load_average.chart.sh b/collectors/charts.d.plugin/load_average/load_average.chart.sh new file mode 100644 index 000000000..b30cb850f --- /dev/null +++ b/collectors/charts.d.plugin/load_average/load_average.chart.sh @@ -0,0 +1,71 @@ +# shellcheck shell=bash disable=SC2154,SC1072,SC1073,SC2009,SC2162,SC2006,SC2002,SC2086,SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +load_average_update_every=5 +load_priority=100 + +# this is an example charts.d collector +# it is disabled by default. +# there is no point to enable it, since netdata already +# collects this information using its internal plugins. +load_average_enabled=0 + +load_average_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + if [ ${load_average_update_every} -lt 5 ] + then + # there is no meaning for shorter than 5 seconds + # the kernel changes this value every 5 seconds + load_average_update_every=5 + fi + + [ ${load_average_enabled} -eq 0 ] && return 1 + return 0 +} + +load_average_create() { + # create a chart with 3 dimensions +cat <<EOF +CHART system.load '' "System Load Average" "load" load system.load line $((load_priority + 1)) $load_average_update_every +DIMENSION load1 '1 min' absolute 1 100 +DIMENSION load5 '5 mins' absolute 1 100 +DIMENSION load15 '15 mins' absolute 1 100 +EOF + + return 0 +} + +load_average_update() { + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + # here we parse the system average load + # it is decimal (with 2 decimal digits), so we remove the dot and + # at the definition we have divisor = 100, to have the graph show the right value + loadavg="`cat /proc/loadavg | sed -e "s/\.//g"`" + load1=`echo $loadavg | cut -d ' ' -f 1` + load5=`echo $loadavg | cut -d ' ' -f 2` + load15=`echo $loadavg | cut -d ' ' -f 3` + + # write the result of the work. + cat <<VALUESEOF +BEGIN system.load +SET load1 = $load1 +SET load5 = $load5 +SET load15 = $load15 +END +VALUESEOF + + return 0 +} + diff --git a/collectors/charts.d.plugin/load_average/load_average.conf b/collectors/charts.d.plugin/load_average/load_average.conf new file mode 100644 index 000000000..68979275f --- /dev/null +++ b/collectors/charts.d.plugin/load_average/load_average.conf @@ -0,0 +1,22 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# netdata can collect this metric already + +#load_average_enabled=0 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#load_average_update_every=5 + +# the charts priority on the dashboard +#load_average_priority=100 + +# the number of retries to do in case of failure +# before disabling the module +#load_average_retries=10 diff --git a/collectors/charts.d.plugin/loopsleepms.sh.inc b/collectors/charts.d.plugin/loopsleepms.sh.inc new file mode 100644 index 000000000..bdc032b99 --- /dev/null +++ b/collectors/charts.d.plugin/loopsleepms.sh.inc @@ -0,0 +1,237 @@ +# no need for shebang - this file is included from other scripts +# SPDX-License-Identifier: GPL-3.0-or-later + +LOOPSLEEP_DATE="$(which date 2>/dev/null || command -v date 2>/dev/null)" +if [ -z "$LOOPSLEEP_DATE" ] + then + echo >&2 "$0: ERROR: Cannot find the command 'date' in the system path." + exit 1 +fi + +# ----------------------------------------------------------------------------- +# use the date command as a high resolution timer + +now_ms= +LOOPSLEEPMS_HIGHRES=1 +test "$($LOOPSLEEP_DATE +%N)" = "%N" && LOOPSLEEPMS_HIGHRES=0 +test -z "$($LOOPSLEEP_DATE +%N)" && LOOPSLEEPMS_HIGHRES=0 +current_time_ms_from_date() { + if [ $LOOPSLEEPMS_HIGHRES -eq 0 ] + then + now_ms="$($LOOPSLEEP_DATE +'%s')000" + else + now_ms="$(( $( $LOOPSLEEP_DATE +'%s * 1000 + %-N / 1000000' ) ))" + fi +} + +# ----------------------------------------------------------------------------- +# use /proc/uptime as a high resolution timer + +current_time_ms_from_date +current_time_ms_from_uptime_started="${now_ms}" +current_time_ms_from_uptime_last="${now_ms}" +current_time_ms_from_uptime_first=0 +current_time_ms_from_uptime() { + local up rest arr=() n + + read up rest </proc/uptime + if [ $? -ne 0 ] + then + echo >&2 "$0: Cannot read /proc/uptime - falling back to current_time_ms_from_date()." + current_time_ms="current_time_ms_from_date" + current_time_ms_from_date + current_time_ms_accuracy=1 + return + fi + + arr=(${up//./ }) + + if [ ${#arr[1]} -lt 1 ] + then + n="${arr[0]}000" + elif [ ${#arr[1]} -lt 2 ] + then + n="${arr[0]}${arr[1]}00" + elif [ ${#arr[1]} -lt 3 ] + then + n="${arr[0]}${arr[1]}0" + else + n="${arr[0]}${arr[1]}" + fi + + now_ms=$((current_time_ms_from_uptime_started - current_time_ms_from_uptime_first + n)) + + if [ "${now_ms}" -lt "${current_time_ms_from_uptime_last}" ] + then + echo >&2 "$0: Cannot use current_time_ms_from_uptime() - new time ${now_ms} is older than the last ${current_time_ms_from_uptime_last} - falling back to current_time_ms_from_date()." + current_time_ms="current_time_ms_from_date" + current_time_ms_from_date + current_time_ms_accuracy=1 + fi + + current_time_ms_from_uptime_last="${now_ms}" +} +current_time_ms_from_uptime +current_time_ms_from_uptime_first="$((now_ms - current_time_ms_from_uptime_started))" +current_time_ms_from_uptime_last="${current_time_ms_from_uptime_first}" +current_time_ms="current_time_ms_from_uptime" +current_time_ms_accuracy=10 +if [ "${current_time_ms_from_uptime_first}" -eq 0 ] + then + echo >&2 "$0: Invalid setup for current_time_ms_from_uptime() - falling back to current_time_ms_from_date()." + current_time_ms="current_time_ms_from_date" + current_time_ms_accuracy=1 +fi + +# ----------------------------------------------------------------------------- +# use read with timeout for sleep + +mysleep="" + +mysleep_fifo="${NETDATA_CACHE_DIR-/tmp}/.netdata_bash_sleep_timer_fifo" +[ -f "${mysleep_fifo}" ] && rm "${mysleep_fifo}" +[ ! -p "${mysleep_fifo}" ] && mkfifo "${mysleep_fifo}" +[ -p "${mysleep_fifo}" ] && mysleep="mysleep_read" + +mysleep_read() { + read -t "${1}" <>"${mysleep_fifo}" + ret=$? + if [ $ret -le 128 ] + then + echo >&2 "$0: Cannot use read for sleeping (return code ${ret})." + mysleep="sleep" + ${mysleep} "${1}" + fi +} + +# ----------------------------------------------------------------------------- +# use bash loadable module for sleep + +mysleep_builtin() { + builtin sleep "${1}" + ret=$? + if [ $ret -ne 0 ] + then + echo >&2 "$0: Cannot use builtin sleep for sleeping (return code ${ret})." + mysleep="sleep" + ${mysleep} "${1}" + fi +} + +if [ -z "${mysleep}" -a "$((BASH_VERSINFO[0] +0))" -ge 3 -a "${NETDATA_BASH_LOADABLES}" != "DISABLE" ] + then + # enable modules only for bash version 3+ + + for bash_modules_path in ${BASH_LOADABLES_PATH//:/ } "$(pkg-config bash --variable=loadablesdir 2>/dev/null)" "/usr/lib/bash" "/lib/bash" "/lib64/bash" "/usr/local/lib/bash" "/usr/local/lib64/bash" + do + [ -z "${bash_modules_path}" -o ! -d "${bash_modules_path}" ] && continue + + # check for sleep + for bash_module_sleep in "sleep" "sleep.so" + do + if [ -f "${bash_modules_path}/${bash_module_sleep}" ] + then + if enable -f "${bash_modules_path}/${bash_module_sleep}" sleep 2>/dev/null + then + mysleep="mysleep_builtin" + # echo >&2 "$0: Using bash loadable ${bash_modules_path}/${bash_module_sleep} for sleep" + break + fi + fi + + done + + [ ! -z "${mysleep}" ] && break + done +fi + +# ----------------------------------------------------------------------------- +# fallback to external sleep + +[ -z "${mysleep}" ] && mysleep="sleep" + + +# ----------------------------------------------------------------------------- +# this function is used to sleep a fraction of a second +# it calculates the difference between every time is called +# and tries to align the sleep time to give you exactly the +# loop you need. + +LOOPSLEEPMS_LASTRUN=0 +LOOPSLEEPMS_NEXTRUN=0 +LOOPSLEEPMS_LASTSLEEP=0 +LOOPSLEEPMS_LASTWORK=0 + +loopsleepms() { + local tellwork=0 t="${1}" div s m now mstosleep + + if [ "${t}" = "tellwork" ] + then + tellwork=1 + shift + t="${1}" + fi + + # $t = the time in seconds to wait + + # if high resolution is not supported + # just sleep the time requested, in seconds + if [ ${LOOPSLEEPMS_HIGHRES} -eq 0 ] + then + sleep ${t} + return + fi + + # get the current time, in ms in ${now_ms} + ${current_time_ms} + + # calculate ms since last run + [ ${LOOPSLEEPMS_LASTRUN} -gt 0 ] && \ + LOOPSLEEPMS_LASTWORK=$((now_ms - LOOPSLEEPMS_LASTRUN - LOOPSLEEPMS_LASTSLEEP + current_time_ms_accuracy)) + # echo "# last loop's work took $LOOPSLEEPMS_LASTWORK ms" + + # remember this run + LOOPSLEEPMS_LASTRUN=${now_ms} + + # calculate the next run + LOOPSLEEPMS_NEXTRUN=$(( ( now_ms - ( now_ms % ( t * 1000 ) ) ) + ( t * 1000 ) )) + + # calculate ms to sleep + mstosleep=$(( LOOPSLEEPMS_NEXTRUN - now_ms + current_time_ms_accuracy )) + # echo "# mstosleep is $mstosleep ms" + + # if we are too slow, sleep some time + test ${mstosleep} -lt 200 && mstosleep=200 + + s=$(( mstosleep / 1000 )) + m=$(( mstosleep - (s * 1000) )) + [ "${m}" -lt 100 ] && m="0${m}" + [ "${m}" -lt 10 ] && m="0${m}" + + test $tellwork -eq 1 && echo >&2 " >>> PERFORMANCE >>> WORK TOOK ${LOOPSLEEPMS_LASTWORK} ms ( $((LOOPSLEEPMS_LASTWORK * 100 / 1000)).$((LOOPSLEEPMS_LASTWORK % 10))% cpu ) >>> SLEEPING ${mstosleep} ms" + + # echo "# sleeping ${s}.${m}" + # echo + ${mysleep} ${s}.${m} + + # keep the values we need + # for our next run + LOOPSLEEPMS_LASTSLEEP=$mstosleep +} + +# test it +#while [ 1 ] +#do +# r=$(( (RANDOM * 2000 / 32767) )) +# s=$((r / 1000)) +# m=$((r - (s * 1000))) +# [ "${m}" -lt 100 ] && m="0${m}" +# [ "${m}" -lt 10 ] && m="0${m}" +# echo "${r} = ${s}.${m}" +# +# # the work +# ${mysleep} ${s}.${m} +# +# # the alignment loop +# loopsleepms tellwork 1 +#done diff --git a/collectors/charts.d.plugin/mem_apps/Makefile.inc b/collectors/charts.d.plugin/mem_apps/Makefile.inc new file mode 100644 index 000000000..ea546fb69 --- /dev/null +++ b/collectors/charts.d.plugin/mem_apps/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += mem_apps/mem_apps.chart.sh +dist_chartsconfig_DATA += mem_apps/mem_apps.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += mem_apps/README.md mem_apps/Makefile.inc + diff --git a/collectors/charts.d.plugin/mem_apps/README.md b/collectors/charts.d.plugin/mem_apps/README.md new file mode 100644 index 000000000..cd8adf0a2 --- /dev/null +++ b/collectors/charts.d.plugin/mem_apps/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE APPS.PLUGIN. diff --git a/collectors/charts.d.plugin/mem_apps/mem_apps.chart.sh b/collectors/charts.d.plugin/mem_apps/mem_apps.chart.sh new file mode 100644 index 000000000..a13dc71f1 --- /dev/null +++ b/collectors/charts.d.plugin/mem_apps/mem_apps.chart.sh @@ -0,0 +1,63 @@ +# shellcheck shell=bash disable=SC2154,SC1072,SC1073,SC2009,SC2162,SC2006,SC2002,SC2086,SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +mem_apps_apps= + +# these are required for computing memory in bytes and cpu in seconds +#mem_apps_pagesize="`getconf PAGESIZE`" +#mem_apps_clockticks="`getconf CLK_TCK`" + +mem_apps_update_every= + +mem_apps_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + if [ -z "$mem_apps_apps" ] + then + error "manual configuration required: please set mem_apps_apps='command1 command2 ...' in $confd/mem_apps_apps.conf" + return 1 + fi + return 0 +} + +mem_apps_bc_finalze= + +mem_apps_create() { + + echo "CHART chartsd_apps.mem '' 'Apps Memory' MB apps apps.mem stacked 20000 $mem_apps_update_every" + + local x= + for x in $mem_apps_apps + do + echo "DIMENSION $x $x absolute 1 1024" + + # this string is needed later in the update() function + # to finalize the instructions for the bc command + mem_apps_bc_finalze="$mem_apps_bc_finalze \"SET $x = \"; $x;" + done + return 0 +} + +mem_apps_update() { + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + echo "BEGIN chartsd_apps.mem" + ps -o comm,rss -C "$mem_apps_apps" |\ + grep -v "^COMMAND" |\ + ( sed -e "s/ \+/ /g" -e "s/ /+=/g"; + echo "$mem_apps_bc_finalze" + ) | bc + echo "END" + + return 0 +} diff --git a/collectors/charts.d.plugin/mem_apps/mem_apps.conf b/collectors/charts.d.plugin/mem_apps/mem_apps.conf new file mode 100644 index 000000000..75d24dc3e --- /dev/null +++ b/collectors/charts.d.plugin/mem_apps/mem_apps.conf @@ -0,0 +1,19 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# app.plugin can do better + +#mem_apps_apps= + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#mem_apps_update_every=2 + +# the number of retries to do in case of failure +# before disabling the module +#mem_apps_retries=10 diff --git a/collectors/charts.d.plugin/mysql/Makefile.inc b/collectors/charts.d.plugin/mysql/Makefile.inc new file mode 100644 index 000000000..ca02fd078 --- /dev/null +++ b/collectors/charts.d.plugin/mysql/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += mysql/mysql.chart.sh +dist_chartsconfig_DATA += mysql/mysql.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += mysql/README.md mysql/Makefile.inc + diff --git a/collectors/charts.d.plugin/mysql/README.md b/collectors/charts.d.plugin/mysql/README.md new file mode 100644 index 000000000..6765b53ab --- /dev/null +++ b/collectors/charts.d.plugin/mysql/README.md @@ -0,0 +1,81 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + +# mysql + +The plugin will monitor one or more mysql servers + +It will produce the following charts: + +1. **Bandwidth** in kbps + * in + * out + +2. **Queries** in queries/sec + * queries + * questions + * slow queries + +3. **Operations** in operations/sec + * opened tables + * flush + * commit + * delete + * prepare + * read first + * read key + * read next + * read prev + * read random + * read random next + * rollback + * save point + * update + * write + +4. **Table Locks** in locks/sec + * immediate + * waited + +5. **Select Issues** in issues/sec + * full join + * full range join + * range + * range check + * scan + +6. **Sort Issues** in issues/sec + * merge passes + * range + * scan + +### configuration + +You can configure many database servers, like this: + +You can provide, per server, the following: + +1. a name, anything you like, but keep it short +2. the mysql command to connect to the server +3. the mysql command line options to be used for connecting to the server + +Here is an example for 2 servers: + +```sh +mysql_opts[server1]="-h server1.example.com" +mysql_opts[server2]="-h server2.example.com --connect_timeout 2" +``` + +The above will use the `mysql` command found in the system path. +You can also provide a custom mysql command per server, like this: + +```sh +mysql_cmds[server2]="/opt/mysql/bin/mysql" +``` + +The above sets the mysql command only for server2. server1 will use the system default. + +If no configuration is given, the plugin will attempt to connect to mysql server at localhost. + + +--- diff --git a/collectors/charts.d.plugin/mysql/mysql.chart.sh b/collectors/charts.d.plugin/mysql/mysql.chart.sh new file mode 100644 index 000000000..37e8e2a7c --- /dev/null +++ b/collectors/charts.d.plugin/mysql/mysql.chart.sh @@ -0,0 +1,528 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# http://dev.mysql.com/doc/refman/5.0/en/server-status-variables.html +# +# https://dev.mysql.com/doc/refman/5.1/en/show-status.html +# SHOW STATUS provides server status information (see Section 5.1.6, “Server Status Variables”). +# This statement does not require any privilege. +# It requires only the ability to connect to the server. + +mysql_update_every=2 +mysql_priority=60000 + +declare -A mysql_cmds=() mysql_opts=() mysql_ids=() mysql_data=() + +mysql_get() { + local arr + local oIFS="${IFS}" + mysql_data=() + IFS=$'\t'$'\n' + #arr=($(run "${@}" -e "SHOW GLOBAL STATUS WHERE value REGEXP '^[0-9]';" | egrep "^(Bytes|Slow_|Que|Handl|Table|Selec|Sort_|Creat|Conne|Abort|Binlo|Threa|Innod|Qcach|Key_|Open)" )) + #arr=($(run "${@}" -N -e "SHOW GLOBAL STATUS;" | egrep "^(Bytes|Slow_|Que|Handl|Table|Selec|Sort_|Creat|Conne|Abort|Binlo|Threa|Innod|Qcach|Key_|Open)[^ ]+\s[0-9]" )) + # shellcheck disable=SC2207 + arr=($(run "${@}" -N -e "SHOW GLOBAL STATUS;" | grep -E "^(Bytes|Slow_|Que|Handl|Table|Selec|Sort_|Creat|Conne|Abort|Binlo|Threa|Innod|Qcach|Key_|Open)[^[:space:]]+[[:space:]]+[0-9]+" )) + IFS="${oIFS}" + + [ "${#arr[@]}" -lt 3 ] && return 1 + local end=${#arr[@]} + for ((i=2;i<end;i+=2)); do + mysql_data["${arr[$i]}"]=${arr[$i+1]} + done + + [ -z "${mysql_data[Connections]}" ] && return 1 + + mysql_data[Thread_cache_misses]=0 + [ $(( mysql_data[Connections] + 1 - 1 )) -gt 0 ] && mysql_data[Thread_cache_misses]=$(( mysql_data[Threads_created] * 10000 / mysql_data[Connections] )) + + return 0 +} + +mysql_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + local x m mysql_cmd tryroot=0 unconfigured=0 + + if [ "${1}" = "tryroot" ] + then + tryroot=1 + shift + fi + + # shellcheck disable=SC2230 + [ -z "${mysql_cmd}" ] && mysql_cmd="$(which mysql 2>/dev/null || command -v mysql 2>/dev/null)" + + if [ ${#mysql_opts[@]} -eq 0 ] + then + unconfigured=1 + + mysql_cmds[local]="$mysql_cmd" + + if [ $tryroot -eq 1 ] + then + # the user has not configured us for mysql access + # if the root user is passwordless in mysql, we can + # attempt to connect to mysql as root + mysql_opts[local]="-u root" + else + mysql_opts[local]= + fi + fi + + # check once if the url works + for m in "${!mysql_opts[@]}" + do + [ -z "${mysql_cmds[$m]}" ] && mysql_cmds[$m]="$mysql_cmd" + if [ -z "${mysql_cmds[$m]}" ] + then + # shellcheck disable=SC2154 + error "cannot get mysql command for '${m}'. Please set mysql_cmds[$m]='/path/to/mysql', in $confd/mysql.conf" + fi + + mysql_get "${mysql_cmds[$m]}" ${mysql_opts[$m]} + # shellcheck disable=SC2181 + if [ ! $? -eq 0 ] + then + error "cannot get global status for '$m'. Please set mysql_opts[$m]='options' to whatever needed to get connected to the mysql server, in $confd/mysql.conf" + unset "mysql_cmds[$m]" + unset "mysql_opts[$m]" + unset "mysql_ids[$m]" + continue + fi + + mysql_ids[$m]="$( fixid "$m" )" + done + + if [ ${#mysql_opts[@]} -eq 0 ] + then + if [ ${unconfigured} -eq 1 ] && [ ${tryroot} -eq 0 ] + then + mysql_check tryroot "${@}" + return $? + else + error "no mysql servers found. Please set mysql_opts[name]='options' to whatever needed to get connected to the mysql server, in $confd/mysql.conf" + return 1 + fi + fi + + return 0 +} + +mysql_create() { + local x + + # create the charts + for x in "${mysql_ids[@]}" + do + cat <<EOF +CHART mysql_$x.net '' "mysql Bandwidth" "kilobits/s" bandwidth mysql.net area $((mysql_priority + 1)) $mysql_update_every +DIMENSION Bytes_received in incremental 8 1024 +DIMENSION Bytes_sent out incremental -8 1024 + +CHART mysql_$x.queries '' "mysql Queries" "queries/s" queries mysql.queries line $((mysql_priority + 2)) $mysql_update_every +DIMENSION Queries queries incremental 1 1 +DIMENSION Questions questions incremental 1 1 +DIMENSION Slow_queries slow_queries incremental -1 1 + +CHART mysql_$x.handlers '' "mysql Handlers" "handlers/s" handlers mysql.handlers line $((mysql_priority + 3)) $mysql_update_every +DIMENSION Handler_commit commit incremental 1 1 +DIMENSION Handler_delete delete incremental 1 1 +DIMENSION Handler_prepare prepare incremental 1 1 +DIMENSION Handler_read_first read_first incremental 1 1 +DIMENSION Handler_read_key read_key incremental 1 1 +DIMENSION Handler_read_next read_next incremental 1 1 +DIMENSION Handler_read_prev read_prev incremental 1 1 +DIMENSION Handler_read_rnd read_rnd incremental 1 1 +DIMENSION Handler_read_rnd_next read_rnd_next incremental 1 1 +DIMENSION Handler_rollback rollback incremental 1 1 +DIMENSION Handler_savepoint savepoint incremental 1 1 +DIMENSION Handler_savepoint_rollback savepoint_rollback incremental 1 1 +DIMENSION Handler_update update incremental 1 1 +DIMENSION Handler_write write incremental 1 1 + +CHART mysql_$x.table_locks '' "mysql Tables Locks" "locks/s" locks mysql.table_locks line $((mysql_priority + 4)) $mysql_update_every +DIMENSION Table_locks_immediate immediate incremental 1 1 +DIMENSION Table_locks_waited waited incremental -1 1 + +CHART mysql_$x.join_issues '' "mysql Select Join Issues" "joins/s" issues mysql.join_issues line $((mysql_priority + 5)) $mysql_update_every +DIMENSION Select_full_join full_join incremental 1 1 +DIMENSION Select_full_range_join full_range_join incremental 1 1 +DIMENSION Select_range range incremental 1 1 +DIMENSION Select_range_check range_check incremental 1 1 +DIMENSION Select_scan scan incremental 1 1 + +CHART mysql_$x.sort_issues '' "mysql Sort Issues" "issues/s" issues mysql.sort.issues line $((mysql_priority + 6)) $mysql_update_every +DIMENSION Sort_merge_passes merge_passes incremental 1 1 +DIMENSION Sort_range range incremental 1 1 +DIMENSION Sort_scan scan incremental 1 1 + +CHART mysql_$x.tmp '' "mysql Tmp Operations" "counter" temporaries mysql.tmp line $((mysql_priority + 7)) $mysql_update_every +DIMENSION Created_tmp_disk_tables disk_tables incremental 1 1 +DIMENSION Created_tmp_files files incremental 1 1 +DIMENSION Created_tmp_tables tables incremental 1 1 + +CHART mysql_$x.connections '' "mysql Connections" "connections/s" connections mysql.connections line $((mysql_priority + 8)) $mysql_update_every +DIMENSION Connections all incremental 1 1 +DIMENSION Aborted_connects aborded incremental 1 1 + +CHART mysql_$x.binlog_cache '' "mysql Binlog Cache" "transactions/s" binlog mysql.binlog_cache line $((mysql_priority + 9)) $mysql_update_every +DIMENSION Binlog_cache_disk_use disk incremental 1 1 +DIMENSION Binlog_cache_use all incremental 1 1 + +CHART mysql_$x.threads '' "mysql Threads" "threads" threads mysql.threads line $((mysql_priority + 10)) $mysql_update_every +DIMENSION Threads_connected connected absolute 1 1 +DIMENSION Threads_created created incremental 1 1 +DIMENSION Threads_cached cached absolute -1 1 +DIMENSION Threads_running running absolute 1 1 + +CHART mysql_$x.thread_cache_misses '' "mysql Threads Cache Misses" "misses" threads mysql.thread_cache_misses area $((mysql_priority + 11)) $mysql_update_every +DIMENSION misses misses absolute 1 100 + +CHART mysql_$x.innodb_io '' "mysql InnoDB I/O Bandwidth" "kilobytes/s" innodb mysql.innodb_io area $((mysql_priority + 12)) $mysql_update_every +DIMENSION Innodb_data_read read incremental 1 1024 +DIMENSION Innodb_data_written write incremental -1 1024 + +CHART mysql_$x.innodb_io_ops '' "mysql InnoDB I/O Operations" "operations/s" innodb mysql.innodb_io_ops line $((mysql_priority + 13)) $mysql_update_every +DIMENSION Innodb_data_reads reads incremental 1 1 +DIMENSION Innodb_data_writes writes incremental -1 1 +DIMENSION Innodb_data_fsyncs fsyncs incremental 1 1 + +CHART mysql_$x.innodb_io_pending_ops '' "mysql InnoDB Pending I/O Operations" "operations" innodb mysql.innodb_io_pending_ops line $((mysql_priority + 14)) $mysql_update_every +DIMENSION Innodb_data_pending_reads reads absolute 1 1 +DIMENSION Innodb_data_pending_writes writes absolute -1 1 +DIMENSION Innodb_data_pending_fsyncs fsyncs absolute 1 1 + +CHART mysql_$x.innodb_log '' "mysql InnoDB Log Operations" "operations/s" innodb mysql.innodb_log line $((mysql_priority + 15)) $mysql_update_every +DIMENSION Innodb_log_waits waits incremental 1 1 +DIMENSION Innodb_log_write_requests write_requests incremental -1 1 +DIMENSION Innodb_log_writes writes incremental -1 1 + +CHART mysql_$x.innodb_os_log '' "mysql InnoDB OS Log Operations" "operations" innodb mysql.innodb_os_log line $((mysql_priority + 16)) $mysql_update_every +DIMENSION Innodb_os_log_fsyncs fsyncs incremental 1 1 +DIMENSION Innodb_os_log_pending_fsyncs pending_fsyncs absolute 1 1 +DIMENSION Innodb_os_log_pending_writes pending_writes absolute -1 1 + +CHART mysql_$x.innodb_os_log_io '' "mysql InnoDB OS Log Bandwidth" "kilobytes/s" innodb mysql.innodb_os_log_io area $((mysql_priority + 17)) $mysql_update_every +DIMENSION Innodb_os_log_written write incremental -1 1024 + +CHART mysql_$x.innodb_cur_row_lock '' "mysql InnoDB Current Row Locks" "operations" innodb mysql.innodb_cur_row_lock area $((mysql_priority + 18)) $mysql_update_every +DIMENSION Innodb_row_lock_current_waits current_waits absolute 1 1 + +CHART mysql_$x.innodb_rows '' "mysql InnoDB Row Operations" "operations/s" innodb mysql.innodb_rows area $((mysql_priority + 19)) $mysql_update_every +DIMENSION Innodb_rows_read read incremental 1 1 +DIMENSION Innodb_rows_deleted deleted incremental -1 1 +DIMENSION Innodb_rows_inserted inserted incremental 1 1 +DIMENSION Innodb_rows_updated updated incremental -1 1 + +CHART mysql_$x.innodb_buffer_pool_pages '' "mysql InnoDB Buffer Pool Pages" "pages" innodb mysql.innodb_buffer_pool_pages line $((mysql_priority + 20)) $mysql_update_every +DIMENSION Innodb_buffer_pool_pages_data data absolute 1 1 +DIMENSION Innodb_buffer_pool_pages_dirty dirty absolute -1 1 +DIMENSION Innodb_buffer_pool_pages_free free absolute 1 1 +DIMENSION Innodb_buffer_pool_pages_flushed flushed incremental -1 1 +DIMENSION Innodb_buffer_pool_pages_misc misc absolute -1 1 +DIMENSION Innodb_buffer_pool_pages_total total absolute 1 1 + +CHART mysql_$x.innodb_buffer_pool_bytes '' "mysql InnoDB Buffer Pool Bytes" "MB" innodb mysql.innodb_buffer_pool_bytes area $((mysql_priority + 21)) $mysql_update_every +DIMENSION Innodb_buffer_pool_bytes_data data absolute 1 $((1024 * 1024)) +DIMENSION Innodb_buffer_pool_bytes_dirty dirty absolute -1 $((1024 * 1024)) + +CHART mysql_$x.innodb_buffer_pool_read_ahead '' "mysql InnoDB Buffer Pool Read Ahead" "operations/s" innodb mysql.innodb_buffer_pool_read_ahead area $((mysql_priority + 22)) $mysql_update_every +DIMENSION Innodb_buffer_pool_read_ahead all incremental 1 1 +DIMENSION Innodb_buffer_pool_read_ahead_evicted evicted incremental -1 1 +DIMENSION Innodb_buffer_pool_read_ahead_rnd random incremental 1 1 + +CHART mysql_$x.innodb_buffer_pool_reqs '' "mysql InnoDB Buffer Pool Requests" "requests/s" innodb mysql.innodb_buffer_pool_reqs area $((mysql_priority + 23)) $mysql_update_every +DIMENSION Innodb_buffer_pool_read_requests reads incremental 1 1 +DIMENSION Innodb_buffer_pool_write_requests writes incremental -1 1 + +CHART mysql_$x.innodb_buffer_pool_ops '' "mysql InnoDB Buffer Pool Operations" "operations/s" innodb mysql.innodb_buffer_pool_ops area $((mysql_priority + 24)) $mysql_update_every +DIMENSION Innodb_buffer_pool_reads 'disk reads' incremental 1 1 +DIMENSION Innodb_buffer_pool_wait_free 'wait free' incremental -1 1 + +CHART mysql_$x.qcache_ops '' "mysql QCache Operations" "queries/s" qcache mysql.qcache_ops line $((mysql_priority + 25)) $mysql_update_every +DIMENSION Qcache_hits hits incremental 1 1 +DIMENSION Qcache_lowmem_prunes 'lowmem prunes' incremental -1 1 +DIMENSION Qcache_inserts inserts incremental 1 1 +DIMENSION Qcache_not_cached 'not cached' incremental -1 1 + +CHART mysql_$x.qcache '' "mysql QCache Queries in Cache" "queries" qcache mysql.qcache line $((mysql_priority + 26)) $mysql_update_every +DIMENSION Qcache_queries_in_cache queries absolute 1 1 + +CHART mysql_$x.qcache_freemem '' "mysql QCache Free Memory" "MB" qcache mysql.qcache_freemem area $((mysql_priority + 27)) $mysql_update_every +DIMENSION Qcache_free_memory free absolute 1 $((1024 * 1024)) + +CHART mysql_$x.qcache_memblocks '' "mysql QCache Memory Blocks" "blocks" qcache mysql.qcache_memblocks line $((mysql_priority + 28)) $mysql_update_every +DIMENSION Qcache_free_blocks free absolute 1 1 +DIMENSION Qcache_total_blocks total absolute 1 1 + +CHART mysql_$x.key_blocks '' "mysql MyISAM Key Cache Blocks" "blocks" myisam mysql.key_blocks line $((mysql_priority + 29)) $mysql_update_every +DIMENSION Key_blocks_unused unused absolute 1 1 +DIMENSION Key_blocks_used used absolute -1 1 +DIMENSION Key_blocks_not_flushed 'not flushed' absolute 1 1 + +CHART mysql_$x.key_requests '' "mysql MyISAM Key Cache Requests" "requests/s" myisam mysql.key_requests area $((mysql_priority + 30)) $mysql_update_every +DIMENSION Key_read_requests reads incremental 1 1 +DIMENSION Key_write_requests writes incremental -1 1 + +CHART mysql_$x.key_disk_ops '' "mysql MyISAM Key Cache Disk Operations" "operations/s" myisam mysql.key_disk_ops area $((mysql_priority + 31)) $mysql_update_every +DIMENSION Key_reads reads incremental 1 1 +DIMENSION Key_writes writes incremental -1 1 + +CHART mysql_$x.files '' "mysql Open Files" "files" files mysql.files line $((mysql_priority + 32)) $mysql_update_every +DIMENSION Open_files files absolute 1 1 + +CHART mysql_$x.files_rate '' "mysql Opened Files Rate" "files/s" files mysql.files_rate line $((mysql_priority + 33)) $mysql_update_every +DIMENSION Opened_files files incremental 1 1 +EOF + + if [ ! -z "${mysql_data[Binlog_stmt_cache_disk_use]}" ] + then + cat <<EOF +CHART mysql_$x.binlog_stmt_cache '' "mysql Binlog Statement Cache" "statements/s" binlog mysql.binlog_stmt_cache line $((mysql_priority + 50)) $mysql_update_every +DIMENSION Binlog_stmt_cache_disk_use disk incremental 1 1 +DIMENSION Binlog_stmt_cache_use all incremental 1 1 +EOF + fi + + if [ ! -z "${mysql_data[Connection_errors_accept]}" ] + then + cat <<EOF +CHART mysql_$x.connection_errors '' "mysql Connection Errors" "connections/s" connections mysql.connection_errors line $((mysql_priority + 51)) $mysql_update_every +DIMENSION Connection_errors_accept accept incremental 1 1 +DIMENSION Connection_errors_internal internal incremental 1 1 +DIMENSION Connection_errors_max_connections max incremental 1 1 +DIMENSION Connection_errors_peer_addr peer_addr incremental 1 1 +DIMENSION Connection_errors_select select incremental 1 1 +DIMENSION Connection_errors_tcpwrap tcpwrap incremental 1 1 +EOF + fi + + done + return 0 +} + + +mysql_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local m x + for m in "${!mysql_ids[@]}" + do + x="${mysql_ids[$m]}" + mysql_get "${mysql_cmds[$m]}" ${mysql_opts[$m]} + + # shellcheck disable=SC2181 + if [ $? -ne 0 ] + then + unset "mysql_ids[$m]" + unset "mysql_opts[$m]" + unset "mysql_cmds[$m]" + error "failed to get values for '${m}', disabling it." + continue + fi + + # write the result of the work. + cat <<VALUESEOF +BEGIN mysql_$x.net $1 +SET Bytes_received = ${mysql_data[Bytes_received]} +SET Bytes_sent = ${mysql_data[Bytes_sent]} +END +BEGIN mysql_$x.queries $1 +SET Queries = ${mysql_data[Queries]} +SET Questions = ${mysql_data[Questions]} +SET Slow_queries = ${mysql_data[Slow_queries]} +END +BEGIN mysql_$x.handlers $1 +SET Handler_commit = ${mysql_data[Handler_commit]} +SET Handler_delete = ${mysql_data[Handler_delete]} +SET Handler_prepare = ${mysql_data[Handler_prepare]} +SET Handler_read_first = ${mysql_data[Handler_read_first]} +SET Handler_read_key = ${mysql_data[Handler_read_key]} +SET Handler_read_next = ${mysql_data[Handler_read_next]} +SET Handler_read_prev = ${mysql_data[Handler_read_prev]} +SET Handler_read_rnd = ${mysql_data[Handler_read_rnd]} +SET Handler_read_rnd_next = ${mysql_data[Handler_read_rnd_next]} +SET Handler_rollback = ${mysql_data[Handler_rollback]} +SET Handler_savepoint = ${mysql_data[Handler_savepoint]} +SET Handler_savepoint_rollback = ${mysql_data[Handler_savepoint_rollback]} +SET Handler_update = ${mysql_data[Handler_update]} +SET Handler_write = ${mysql_data[Handler_write]} +END +BEGIN mysql_$x.table_locks $1 +SET Table_locks_immediate = ${mysql_data[Table_locks_immediate]} +SET Table_locks_waited = ${mysql_data[Table_locks_waited]} +END +BEGIN mysql_$x.join_issues $1 +SET Select_full_join = ${mysql_data[Select_full_join]} +SET Select_full_range_join = ${mysql_data[Select_full_range_join]} +SET Select_range = ${mysql_data[Select_range]} +SET Select_range_check = ${mysql_data[Select_range_check]} +SET Select_scan = ${mysql_data[Select_scan]} +END +BEGIN mysql_$x.sort_issues $1 +SET Sort_merge_passes = ${mysql_data[Sort_merge_passes]} +SET Sort_range = ${mysql_data[Sort_range]} +SET Sort_scan = ${mysql_data[Sort_scan]} +END +BEGIN mysql_$x.tmp $1 +SET Created_tmp_disk_tables = ${mysql_data[Created_tmp_disk_tables]} +SET Created_tmp_files = ${mysql_data[Created_tmp_files]} +SET Created_tmp_tables = ${mysql_data[Created_tmp_tables]} +END +BEGIN mysql_$x.connections $1 +SET Connections = ${mysql_data[Connections]} +SET Aborted_connects = ${mysql_data[Aborted_connects]} +END +BEGIN mysql_$x.binlog_cache $1 +SET Binlog_cache_disk_use = ${mysql_data[Binlog_cache_disk_use]} +SET Binlog_cache_use = ${mysql_data[Binlog_cache_use]} +END +BEGIN mysql_$x.threads $1 +SET Threads_connected = ${mysql_data[Threads_connected]} +SET Threads_created = ${mysql_data[Threads_created]} +SET Threads_cached = ${mysql_data[Threads_cached]} +SET Threads_running = ${mysql_data[Threads_running]} +END +BEGIN mysql_$x.thread_cache_misses $1 +SET misses = ${mysql_data[Thread_cache_misses]} +END +BEGIN mysql_$x.innodb_io $1 +SET Innodb_data_read = ${mysql_data[Innodb_data_read]} +SET Innodb_data_written = ${mysql_data[Innodb_data_written]} +END +BEGIN mysql_$x.innodb_io_ops $1 +SET Innodb_data_reads = ${mysql_data[Innodb_data_reads]} +SET Innodb_data_writes = ${mysql_data[Innodb_data_writes]} +SET Innodb_data_fsyncs = ${mysql_data[Innodb_data_fsyncs]} +END +BEGIN mysql_$x.innodb_io_pending_ops $1 +SET Innodb_data_pending_reads = ${mysql_data[Innodb_data_pending_reads]} +SET Innodb_data_pending_writes = ${mysql_data[Innodb_data_pending_writes]} +SET Innodb_data_pending_fsyncs = ${mysql_data[Innodb_data_pending_fsyncs]} +END +BEGIN mysql_$x.innodb_log $1 +SET Innodb_log_waits = ${mysql_data[Innodb_log_waits]} +SET Innodb_log_write_requests = ${mysql_data[Innodb_log_write_requests]} +SET Innodb_log_writes = ${mysql_data[Innodb_log_writes]} +END +BEGIN mysql_$x.innodb_os_log $1 +SET Innodb_os_log_fsyncs = ${mysql_data[Innodb_os_log_fsyncs]} +SET Innodb_os_log_pending_fsyncs = ${mysql_data[Innodb_os_log_pending_fsyncs]} +SET Innodb_os_log_pending_writes = ${mysql_data[Innodb_os_log_pending_writes]} +END +BEGIN mysql_$x.innodb_os_log_io $1 +SET Innodb_os_log_written = ${mysql_data[Innodb_os_log_written]} +END +BEGIN mysql_$x.innodb_cur_row_lock $1 +SET Innodb_row_lock_current_waits = ${mysql_data[Innodb_row_lock_current_waits]} +END +BEGIN mysql_$x.innodb_rows $1 +SET Innodb_rows_inserted = ${mysql_data[Innodb_rows_inserted]} +SET Innodb_rows_read = ${mysql_data[Innodb_rows_read]} +SET Innodb_rows_updated = ${mysql_data[Innodb_rows_updated]} +SET Innodb_rows_deleted = ${mysql_data[Innodb_rows_deleted]} +END +BEGIN mysql_$x.innodb_buffer_pool_pages $1 +SET Innodb_buffer_pool_pages_data = ${mysql_data[Innodb_buffer_pool_pages_data]} +SET Innodb_buffer_pool_pages_dirty = ${mysql_data[Innodb_buffer_pool_pages_dirty]} +SET Innodb_buffer_pool_pages_free = ${mysql_data[Innodb_buffer_pool_pages_free]} +SET Innodb_buffer_pool_pages_flushed = ${mysql_data[Innodb_buffer_pool_pages_flushed]} +SET Innodb_buffer_pool_pages_misc = ${mysql_data[Innodb_buffer_pool_pages_misc]} +SET Innodb_buffer_pool_pages_total = ${mysql_data[Innodb_buffer_pool_pages_total]} +END +BEGIN mysql_$x.innodb_buffer_pool_bytes $1 +SET Innodb_buffer_pool_bytes_data = ${mysql_data[Innodb_buffer_pool_bytes_data]} +SET Innodb_buffer_pool_bytes_dirty = ${mysql_data[Innodb_buffer_pool_bytes_dirty]} +END +BEGIN mysql_$x.innodb_buffer_pool_read_ahead $1 +SET Innodb_buffer_pool_read_ahead = ${mysql_data[Innodb_buffer_pool_read_ahead]} +SET Innodb_buffer_pool_read_ahead_evicted = ${mysql_data[Innodb_buffer_pool_read_ahead_evicted]} +SET Innodb_buffer_pool_read_ahead_rnd = ${mysql_data[Innodb_buffer_pool_read_ahead_rnd]} +END +BEGIN mysql_$x.innodb_buffer_pool_reqs $1 +SET Innodb_buffer_pool_read_requests = ${mysql_data[Innodb_buffer_pool_read_requests]} +SET Innodb_buffer_pool_write_requests = ${mysql_data[Innodb_buffer_pool_write_requests]} +END +BEGIN mysql_$x.innodb_buffer_pool_ops $1 +SET Innodb_buffer_pool_reads = ${mysql_data[Innodb_buffer_pool_reads]} +SET Innodb_buffer_pool_wait_free = ${mysql_data[Innodb_buffer_pool_wait_free]} +END +BEGIN mysql_$x.qcache_ops $1 +SET Qcache_hits hits = ${mysql_data[Qcache_hits]} +SET Qcache_lowmem_prunes = ${mysql_data[Qcache_lowmem_prunes]} +SET Qcache_inserts = ${mysql_data[Qcache_inserts]} +SET Qcache_not_cached = ${mysql_data[Qcache_not_cached]} +END +BEGIN mysql_$x.qcache $1 +SET Qcache_queries_in_cache = ${mysql_data[Qcache_queries_in_cache]} +END +BEGIN mysql_$x.qcache_freemem $1 +SET Qcache_free_memory = ${mysql_data[Qcache_free_memory]} +END +BEGIN mysql_$x.qcache_memblocks $1 +SET Qcache_free_blocks = ${mysql_data[Qcache_free_blocks]} +SET Qcache_total_blocks = ${mysql_data[Qcache_total_blocks]} +END +BEGIN mysql_$x.key_blocks $1 +SET Key_blocks_unused = ${mysql_data[Key_blocks_unused]} +SET Key_blocks_used = ${mysql_data[Key_blocks_used]} +SET Key_blocks_not_flushed = ${mysql_data[Key_blocks_not_flushed]} +END +BEGIN mysql_$x.key_requests $1 +SET Key_read_requests = ${mysql_data[Key_read_requests]} +SET Key_write_requests = ${mysql_data[Key_write_requests]} +END +BEGIN mysql_$x.key_disk_ops $1 +SET Key_reads = ${mysql_data[Key_reads]} +SET Key_writes = ${mysql_data[Key_writes]} +END +BEGIN mysql_$x.files $1 +SET Open_files = ${mysql_data[Open_files]} +END +BEGIN mysql_$x.files_rate $1 +SET Opened_files = ${mysql_data[Opened_files]} +END +VALUESEOF + + if [ ! -z "${mysql_data[Binlog_stmt_cache_disk_use]}" ] + then + cat <<VALUESEOF +BEGIN mysql_$x.binlog_stmt_cache $1 +SET Binlog_stmt_cache_disk_use = ${mysql_data[Binlog_stmt_cache_disk_use]} +SET Binlog_stmt_cache_use = ${mysql_data[Binlog_stmt_cache_use]} +END +VALUESEOF + fi + + if [ ! -z "${mysql_data[Connection_errors_accept]}" ] + then + cat <<VALUESEOF +BEGIN mysql_$x.connection_errors $1 +SET Connection_errors_accept = ${mysql_data[Connection_errors_accept]} +SET Connection_errors_internal = ${mysql_data[Connection_errors_internal]} +SET Connection_errors_max_connections = ${mysql_data[Connection_errors_max_connections]} +SET Connection_errors_peer_addr = ${mysql_data[Connection_errors_peer_addr]} +SET Connection_errors_select = ${mysql_data[Connection_errors_select]} +SET Connection_errors_tcpwrap = ${mysql_data[Connection_errors_tcpwrap]} +END +VALUESEOF + fi + done + + [ ${#mysql_ids[@]} -eq 0 ] && error "no mysql servers left active." && return 1 + return 0 +} + diff --git a/collectors/charts.d.plugin/mysql/mysql.conf b/collectors/charts.d.plugin/mysql/mysql.conf new file mode 100644 index 000000000..683e4af35 --- /dev/null +++ b/collectors/charts.d.plugin/mysql/mysql.conf @@ -0,0 +1,23 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +#mysql_cmds[name]="" +#mysql_opts[name]="" + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#mysql_update_every=2 + +# the charts priority on the dashboard +#mysql_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#mysql_retries=10 diff --git a/collectors/charts.d.plugin/nginx/Makefile.inc b/collectors/charts.d.plugin/nginx/Makefile.inc new file mode 100644 index 000000000..c9d31aada --- /dev/null +++ b/collectors/charts.d.plugin/nginx/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += nginx/nginx.chart.sh +dist_chartsconfig_DATA += nginx/nginx.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += nginx/README.md nginx/Makefile.inc + diff --git a/collectors/charts.d.plugin/nginx/README.md b/collectors/charts.d.plugin/nginx/README.md new file mode 100644 index 000000000..d82951aac --- /dev/null +++ b/collectors/charts.d.plugin/nginx/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT diff --git a/collectors/charts.d.plugin/nginx/nginx.chart.sh b/collectors/charts.d.plugin/nginx/nginx.chart.sh new file mode 100644 index 000000000..14dda0832 --- /dev/null +++ b/collectors/charts.d.plugin/nginx/nginx.chart.sh @@ -0,0 +1,144 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# if this chart is called X.chart.sh, then all functions and global variables +# must start with X_ + +nginx_url="http://127.0.0.1:80/stub_status" +nginx_curl_opts="" + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +nginx_update_every= +nginx_priority=60000 + +declare -a nginx_response=() +nginx_active_connections=0 +nginx_accepts=0 +nginx_handled=0 +nginx_requests=0 +nginx_reading=0 +nginx_writing=0 +nginx_waiting=0 +nginx_get() { + # shellcheck disable=SC2207 + nginx_response=($(run curl -Ss ${nginx_curl_opts} "${nginx_url}")) + # shellcheck disable=SC2181 + if [ $? -ne 0 ] || [ "${#nginx_response[@]}" -eq 0 ]; then return 1; fi + + if [ "${nginx_response[0]}" != "Active" ] ||\ + [ "${nginx_response[1]}" != "connections:" ] ||\ + [ "${nginx_response[3]}" != "server" ] ||\ + [ "${nginx_response[4]}" != "accepts" ] ||\ + [ "${nginx_response[5]}" != "handled" ] ||\ + [ "${nginx_response[6]}" != "requests" ] ||\ + [ "${nginx_response[10]}" != "Reading:" ] ||\ + [ "${nginx_response[12]}" != "Writing:" ] ||\ + [ "${nginx_response[14]}" != "Waiting:" ] + then + error "Invalid response from nginx server: ${nginx_response[*]}" + return 1 + fi + + nginx_active_connections="${nginx_response[2]}" + nginx_accepts="${nginx_response[7]}" + nginx_handled="${nginx_response[8]}" + nginx_requests="${nginx_response[9]}" + nginx_reading="${nginx_response[11]}" + nginx_writing="${nginx_response[13]}" + nginx_waiting="${nginx_response[15]}" + + if [ -z "${nginx_active_connections}" ] ||\ + [ -z "${nginx_accepts}" ] ||\ + [ -z "${nginx_handled}" ] ||\ + [ -z "${nginx_requests}" ] ||\ + [ -z "${nginx_reading}" ] ||\ + [ -z "${nginx_writing}" ] ||\ + [ -z "${nginx_waiting}" ] + then + error "empty values got from nginx server: ${nginx_response[*]}" + return 1 + fi + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +nginx_check() { + + nginx_get + # shellcheck disable=2181 + if [ $? -ne 0 ] + then + # shellcheck disable=SC2154 + error "cannot find stub_status on URL '${nginx_url}'. Please set nginx_url='http://nginx.server/stub_status' in $confd/nginx.conf" + return 1 + fi + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + return 0 +} + +# _create is called once, to create the charts +nginx_create() { + cat <<EOF +CHART nginx_local.connections '' "nginx Active Connections" "connections" nginx nginx.connections line $((nginx_priority + 1)) $nginx_update_every +DIMENSION active '' absolute 1 1 + +CHART nginx_local.requests '' "nginx Requests" "requests/s" nginx nginx.requests line $((nginx_priority + 2)) $nginx_update_every +DIMENSION requests '' incremental 1 1 + +CHART nginx_local.connections_status '' "nginx Active Connections by Status" "connections" nginx nginx.connections.status line $((nginx_priority + 3)) $nginx_update_every +DIMENSION reading '' absolute 1 1 +DIMENSION writing '' absolute 1 1 +DIMENSION waiting idle absolute 1 1 + +CHART nginx_local.connect_rate '' "nginx Connections Rate" "connections/s" nginx nginx.connections.rate line $((nginx_priority + 4)) $nginx_update_every +DIMENSION accepts accepted incremental 1 1 +DIMENSION handled '' incremental 1 1 +EOF + + return 0 +} + +# _update is called continuously, to collect the values +nginx_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + nginx_get || return 1 + + # write the result of the work. + cat <<VALUESEOF +BEGIN nginx_local.connections $1 +SET active = $((nginx_active_connections)) +END +BEGIN nginx_local.requests $1 +SET requests = $((nginx_requests)) +END +BEGIN nginx_local.connections_status $1 +SET reading = $((nginx_reading)) +SET writing = $((nginx_writing)) +SET waiting = $((nginx_waiting)) +END +BEGIN nginx_local.connect_rate $1 +SET accepts = $((nginx_accepts)) +SET handled = $((nginx_handled)) +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/nginx/nginx.conf b/collectors/charts.d.plugin/nginx/nginx.conf new file mode 100644 index 000000000..c46100a58 --- /dev/null +++ b/collectors/charts.d.plugin/nginx/nginx.conf @@ -0,0 +1,23 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +#nginx_url="http://127.0.0.1:80/stub_status" +#nginx_curl_opts="" + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#nginx_update_every= + +# the charts priority on the dashboard +#nginx_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#nginx_retries=10 diff --git a/collectors/charts.d.plugin/nut/Makefile.inc b/collectors/charts.d.plugin/nut/Makefile.inc new file mode 100644 index 000000000..4fb47145d --- /dev/null +++ b/collectors/charts.d.plugin/nut/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += nut/nut.chart.sh +dist_chartsconfig_DATA += nut/nut.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += nut/README.md nut/Makefile.inc + diff --git a/collectors/charts.d.plugin/nut/README.md b/collectors/charts.d.plugin/nut/README.md new file mode 100644 index 000000000..71906f55a --- /dev/null +++ b/collectors/charts.d.plugin/nut/README.md @@ -0,0 +1,59 @@ +# nut + +The plugin will collect UPS data for all UPSes configured in the system. + +The following charts will be created: + +1. **UPS Charge** + + * percentage changed + +2. **UPS Battery Voltage** + + * current voltage + * high voltage + * low voltage + * nominal voltage + +3. **UPS Input Voltage** + + * current voltage + * fault voltage + * nominal voltage + +4. **UPS Input Current** + + * nominal current + +5. **UPS Input Frequency** + + * current frequency + * nominal frequency + +6. **UPS Output Voltage** + + * current voltage + +7. **UPS Load** + + * current load + +8. **UPS Temperature** + + * current temperature + + +### configuration + +This is the internal default for `/etc/netdata/nut.conf` + +```sh +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +nut_ups= + +# how frequently to collect UPS data +nut_update_every=2 +``` + +--- diff --git a/collectors/charts.d.plugin/nut/nut.chart.sh b/collectors/charts.d.plugin/nut/nut.chart.sh new file mode 100644 index 000000000..7e252f325 --- /dev/null +++ b/collectors/charts.d.plugin/nut/nut.chart.sh @@ -0,0 +1,241 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016-2017 Costa Tsaousis <costa@tsaousis.gr> +# + +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +nut_ups= + +# how frequently to collect UPS data +nut_update_every=2 + +# how much time in seconds, to wait for nut to respond +nut_timeout=2 + +# set this to 1, to enable another chart showing the number +# of UPS clients connected to upsd +nut_clients_chart=0 + +# the priority of nut related to other charts +nut_priority=90000 + +declare -A nut_ids=() +declare -A nut_names=() + +nut_get_all() { + run -t $nut_timeout upsc -l +} + +nut_get() { + run -t $nut_timeout upsc "$1" + + if [ "${nut_clients_chart}" -eq "1" ] + then + printf "ups.connected_clients: " + run -t $nut_timeout upsc -c "$1" | wc -l + fi +} + +nut_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + local x + + require_cmd upsc || return 1 + + [ -z "$nut_ups" ] && nut_ups="$( nut_get_all )" + + for x in $nut_ups + do + nut_get "$x" >/dev/null + # shellcheck disable=SC2181 + if [ $? -eq 0 ] + then + if [ ! -z "${nut_names[${x}]}" ] + then + nut_ids[$x]="$( fixid "${nut_names[${x}]}" )" + else + nut_ids[$x]="$( fixid "$x" )" + fi + continue + fi + error "cannot get information for NUT UPS '$x'." + done + + if [ ${#nut_ids[@]} -eq 0 ] + then + # shellcheck disable=SC2154 + error "Cannot find UPSes - please set nut_ups='ups_name' in $confd/nut.conf" + return 1 + fi + + return 0 +} + +nut_create() { + # create the charts + local x + + for x in "${nut_ids[@]}" + do + cat <<EOF +CHART nut_$x.charge '' "UPS Charge" "percentage" ups nut.charge area $((nut_priority + 1)) $nut_update_every +DIMENSION battery_charge charge absolute 1 100 + +CHART nut_$x.runtime '' "UPS Runtime" "seconds" ups nut.runtime area $((nut_priority + 2)) $nut_update_every +DIMENSION battery_runtime runtime absolute 1 100 + +CHART nut_$x.battery_voltage '' "UPS Battery Voltage" "Volts" ups nut.battery.voltage line $((nut_priority + 3)) $nut_update_every +DIMENSION battery_voltage voltage absolute 1 100 +DIMENSION battery_voltage_high high absolute 1 100 +DIMENSION battery_voltage_low low absolute 1 100 +DIMENSION battery_voltage_nominal nominal absolute 1 100 + +CHART nut_$x.input_voltage '' "UPS Input Voltage" "Volts" input nut.input.voltage line $((nut_priority + 4)) $nut_update_every +DIMENSION input_voltage voltage absolute 1 100 +DIMENSION input_voltage_fault fault absolute 1 100 +DIMENSION input_voltage_nominal nominal absolute 1 100 + +CHART nut_$x.input_current '' "UPS Input Current" "Ampere" input nut.input.current line $((nut_priority + 5)) $nut_update_every +DIMENSION input_current_nominal nominal absolute 1 100 + +CHART nut_$x.input_frequency '' "UPS Input Frequency" "Hz" input nut.input.frequency line $((nut_priority + 6)) $nut_update_every +DIMENSION input_frequency frequency absolute 1 100 +DIMENSION input_frequency_nominal nominal absolute 1 100 + +CHART nut_$x.output_voltage '' "UPS Output Voltage" "Volts" output nut.output.voltage line $((nut_priority + 7)) $nut_update_every +DIMENSION output_voltage voltage absolute 1 100 + +CHART nut_$x.load '' "UPS Load" "percentage" ups nut.load area $((nut_priority)) $nut_update_every +DIMENSION load load absolute 1 100 + +CHART nut_$x.temp '' "UPS Temperature" "temperature" ups nut.temperature line $((nut_priority + 8)) $nut_update_every +DIMENSION temp temp absolute 1 100 +EOF + + if [ "${nut_clients_chart}" = "1" ] + then + cat <<EOF2 +CHART nut_$x.clients '' "UPS Connected Clients" "clients" ups nut.clients area $((nut_priority + 9)) $nut_update_every +DIMENSION clients '' absolute 1 1 +EOF2 + fi + + done + + return 0 +} + + +nut_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local i x + for i in "${!nut_ids[@]}" + do + x="${nut_ids[$i]}" + nut_get "$i" | awk " +BEGIN { + battery_charge = 0; + battery_runtime = 0; + battery_voltage = 0; + battery_voltage_high = 0; + battery_voltage_low = 0; + battery_voltage_nominal = 0; + input_voltage = 0; + input_voltage_fault = 0; + input_voltage_nominal = 0; + input_current_nominal = 0; + input_frequency = 0; + input_frequency_nominal = 0; + output_voltage = 0; + load = 0; + temp = 0; + client = 0; + do_clients = ${nut_clients_chart}; +} +/^battery.charge: .*/ { battery_charge = \$2 * 100 }; +/^battery.runtime: .*/ { battery_runtime = \$2 * 100 }; +/^battery.voltage: .*/ { battery_voltage = \$2 * 100 }; +/^battery.voltage.high: .*/ { battery_voltage_high = \$2 * 100 }; +/^battery.voltage.low: .*/ { battery_voltage_low = \$2 * 100 }; +/^battery.voltage.nominal: .*/ { battery_voltage_nominal = \$2 * 100 }; +/^input.voltage: .*/ { input_voltage = \$2 * 100 }; +/^input.voltage.fault: .*/ { input_voltage_fault = \$2 * 100 }; +/^input.voltage.nominal: .*/ { input_voltage_nominal = \$2 * 100 }; +/^input.current.nominal: .*/ { input_current_nominal = \$2 * 100 }; +/^input.frequency: .*/ { input_frequency = \$2 * 100 }; +/^input.frequency.nominal: .*/ { input_frequency_nominal = \$2 * 100 }; +/^output.voltage: .*/ { output_voltage = \$2 * 100 }; +/^ups.load: .*/ { load = \$2 * 100 }; +/^ups.temperature: .*/ { temp = \$2 * 100 }; +/^ups.connected_clients: .*/ { clients = \$2 }; +END { + print \"BEGIN nut_$x.charge $1\"; + print \"SET battery_charge = \" battery_charge; + print \"END\" + + print \"BEGIN nut_$x.runtime $1\"; + print \"SET battery_runtime = \" battery_runtime; + print \"END\" + + print \"BEGIN nut_$x.battery_voltage $1\"; + print \"SET battery_voltage = \" battery_voltage; + print \"SET battery_voltage_high = \" battery_voltage_high; + print \"SET battery_voltage_low = \" battery_voltage_low; + print \"SET battery_voltage_nominal = \" battery_voltage_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_voltage $1\"; + print \"SET input_voltage = \" input_voltage; + print \"SET input_voltage_fault = \" input_voltage_fault; + print \"SET input_voltage_nominal = \" input_voltage_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_current $1\"; + print \"SET input_current_nominal = \" input_current_nominal; + print \"END\" + + print \"BEGIN nut_$x.input_frequency $1\"; + print \"SET input_frequency = \" input_frequency; + print \"SET input_frequency_nominal = \" input_frequency_nominal; + print \"END\" + + print \"BEGIN nut_$x.output_voltage $1\"; + print \"SET output_voltage = \" output_voltage; + print \"END\" + + print \"BEGIN nut_$x.load $1\"; + print \"SET load = \" load; + print \"END\" + + print \"BEGIN nut_$x.temp $1\"; + print \"SET temp = \" temp; + print \"END\" + + if(do_clients) { + print \"BEGIN nut_$x.clients $1\"; + print \"SET clients = \" clients; + print \"END\" + } +}" + # shellcheck disable=2181 + [ $? -ne 0 ] && unset "nut_ids[$i]" && error "failed to get values for '$i', disabling it." + done + + [ ${#nut_ids[@]} -eq 0 ] && error "no UPSes left active." && return 1 + return 0 +} diff --git a/collectors/charts.d.plugin/nut/nut.conf b/collectors/charts.d.plugin/nut/nut.conf new file mode 100644 index 000000000..b95ad9048 --- /dev/null +++ b/collectors/charts.d.plugin/nut/nut.conf @@ -0,0 +1,33 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# a space separated list of UPS names +# if empty, the list returned by 'upsc -l' will be used +#nut_ups= + +# each line represents an alias for one UPS +# if empty, the FQDN will be used +#nut_names["FQDN1"]="alias" +#nut_names["FQDN2"]="alias" + +# how much time in seconds, to wait for nut to respond +#nut_timeout=2 + +# set this to 1, to enable another chart showing the number +# of UPS clients connected to upsd +#nut_clients_chart=1 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#nut_update_every=2 + +# the charts priority on the dashboard +#nut_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#nut_retries=10 diff --git a/collectors/charts.d.plugin/opensips/Makefile.inc b/collectors/charts.d.plugin/opensips/Makefile.inc new file mode 100644 index 000000000..a7b5d3a92 --- /dev/null +++ b/collectors/charts.d.plugin/opensips/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += opensips/opensips.chart.sh +dist_chartsconfig_DATA += opensips/opensips.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += opensips/README.md opensips/Makefile.inc + diff --git a/collectors/charts.d.plugin/opensips/README.md b/collectors/charts.d.plugin/opensips/README.md new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/collectors/charts.d.plugin/opensips/README.md diff --git a/collectors/charts.d.plugin/opensips/opensips.chart.sh b/collectors/charts.d.plugin/opensips/opensips.chart.sh new file mode 100644 index 000000000..c227bd4f2 --- /dev/null +++ b/collectors/charts.d.plugin/opensips/opensips.chart.sh @@ -0,0 +1,326 @@ +# shellcheck shell=bash disable=SC1117,SC2154,SC2086 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +opensips_opts="fifo get_statistics all" +opensips_cmd= +opensips_update_every=5 +opensips_timeout=2 +opensips_priority=80000 + +opensips_get_stats() { + run -t $opensips_timeout "$opensips_cmd" $opensips_opts |\ + grep "^\(core\|dialog\|net\|registrar\|shmem\|siptrace\|sl\|tm\|uri\|usrloc\):[a-zA-Z0-9_-]\+[[:space:]]*[=:]\+[[:space:]]*[0-9]\+[[:space:]]*$" |\ + sed \ + -e "s|[[:space:]]*[=:]\+[[:space:]]*\([0-9]\+\)[[:space:]]*$|=\1|g" \ + -e "s|[[:space:]:-]\+|_|g" \ + -e "s|^|opensips_|g" + + local ret=$? + [ $ret -ne 0 ] && echo "opensips_command_failed=1" + return $ret +} + +opensips_check() { + # if the user did not provide an opensips_cmd + # try to find it in the system + if [ -z "$opensips_cmd" ] + then + require_cmd opensipsctl || return 1 + fi + + # check once if the command works + local x + x="$(opensips_get_stats | grep "^opensips_core_")" + # shellcheck disable=SC2181 + if [ ! $? -eq 0 ] || [ -z "$x" ] + then + error "cannot get global status. Please set opensips_opts='options' whatever needed to get connected to opensips server, in $confd/opensips.conf" + return 1 + fi + + return 0 +} + +opensips_create() { + # create the charts + cat <<EOF +CHART opensips.dialogs_active '' "OpenSIPS Active Dialogs" "dialogs" dialogs '' area $((opensips_priority + 1)) $opensips_update_every +DIMENSION dialog_active_dialogs active absolute 1 1 +DIMENSION dialog_early_dialogs early absolute -1 1 + +CHART opensips.users '' "OpenSIPS Users" "users" users '' line $((opensips_priority + 2)) $opensips_update_every +DIMENSION usrloc_registered_users registered absolute 1 1 +DIMENSION usrloc_location_users location absolute 1 1 +DIMENSION usrloc_location_contacts contacts absolute 1 1 +DIMENSION usrloc_location_expires expires incremental -1 1 + +CHART opensips.registrar '' "OpenSIPS Registrar" "registrations/s" registrar '' line $((opensips_priority + 3)) $opensips_update_every +DIMENSION registrar_accepted_regs accepted incremental 1 1 +DIMENSION registrar_rejected_regs rejected incremental -1 1 + +CHART opensips.transactions '' "OpenSIPS Transactions" "transactions/s" transactions '' line $((opensips_priority + 4)) $opensips_update_every +DIMENSION tm_UAS_transactions UAS incremental 1 1 +DIMENSION tm_UAC_transactions UAC incremental -1 1 + +CHART opensips.core_rcv '' "OpenSIPS Core Receives" "queries/s" core '' line $((opensips_priority + 5)) $opensips_update_every +DIMENSION core_rcv_requests requests incremental 1 1 +DIMENSION core_rcv_replies replies incremental -1 1 + +CHART opensips.core_fwd '' "OpenSIPS Core Forwards" "queries/s" core '' line $((opensips_priority + 6)) $opensips_update_every +DIMENSION core_fwd_requests requests incremental 1 1 +DIMENSION core_fwd_replies replies incremental -1 1 + +CHART opensips.core_drop '' "OpenSIPS Core Drops" "queries/s" core '' line $((opensips_priority + 7)) $opensips_update_every +DIMENSION core_drop_requests requests incremental 1 1 +DIMENSION core_drop_replies replies incremental -1 1 + +CHART opensips.core_err '' "OpenSIPS Core Errors" "queries/s" core '' line $((opensips_priority + 8)) $opensips_update_every +DIMENSION core_err_requests requests incremental 1 1 +DIMENSION core_err_replies replies incremental -1 1 + +CHART opensips.core_bad '' "OpenSIPS Core Bad" "queries/s" core '' line $((opensips_priority + 9)) $opensips_update_every +DIMENSION core_bad_URIs_rcvd bad_URIs_rcvd incremental 1 1 +DIMENSION core_unsupported_methods unsupported_methods incremental 1 1 +DIMENSION core_bad_msg_hdr bad_msg_hdr incremental 1 1 + +CHART opensips.tm_replies '' "OpenSIPS TM Replies" "replies/s" transactions '' line $((opensips_priority + 10)) $opensips_update_every +DIMENSION tm_received_replies received incremental 1 1 +DIMENSION tm_relayed_replies relayed incremental 1 1 +DIMENSION tm_local_replies local incremental 1 1 + +CHART opensips.transactions_status '' "OpenSIPS Transactions Status" "transactions/s" transactions '' line $((opensips_priority + 11)) $opensips_update_every +DIMENSION tm_2xx_transactions 2xx incremental 1 1 +DIMENSION tm_3xx_transactions 3xx incremental 1 1 +DIMENSION tm_4xx_transactions 4xx incremental 1 1 +DIMENSION tm_5xx_transactions 5xx incremental 1 1 +DIMENSION tm_6xx_transactions 6xx incremental 1 1 + +CHART opensips.transactions_inuse '' "OpenSIPS InUse Transactions" "transactions" transactions '' line $((opensips_priority + 12)) $opensips_update_every +DIMENSION tm_inuse_transactions inuse absolute 1 1 + +CHART opensips.sl_replies '' "OpenSIPS SL Replies" "replies/s" core '' line $((opensips_priority + 13)) $opensips_update_every +DIMENSION sl_1xx_replies 1xx incremental 1 1 +DIMENSION sl_2xx_replies 2xx incremental 1 1 +DIMENSION sl_3xx_replies 3xx incremental 1 1 +DIMENSION sl_4xx_replies 4xx incremental 1 1 +DIMENSION sl_5xx_replies 5xx incremental 1 1 +DIMENSION sl_6xx_replies 6xx incremental 1 1 +DIMENSION sl_sent_replies sent incremental 1 1 +DIMENSION sl_sent_err_replies error incremental 1 1 +DIMENSION sl_received_ACKs ACKed incremental 1 1 + +CHART opensips.dialogs '' "OpenSIPS Dialogs" "dialogs/s" dialogs '' line $((opensips_priority + 14)) $opensips_update_every +DIMENSION dialog_processed_dialogs processed incremental 1 1 +DIMENSION dialog_expired_dialogs expired incremental 1 1 +DIMENSION dialog_failed_dialogs failed incremental -1 1 + +CHART opensips.net_waiting '' "OpenSIPS Network Waiting" "kilobytes" net '' line $((opensips_priority + 15)) $opensips_update_every +DIMENSION net_waiting_udp UDP absolute 1 1024 +DIMENSION net_waiting_tcp TCP absolute 1 1024 + +CHART opensips.uri_checks '' "OpenSIPS URI Checks" "checks / sec" uri '' line $((opensips_priority + 16)) $opensips_update_every +DIMENSION uri_positive_checks positive incremental 1 1 +DIMENSION uri_negative_checks negative incremental -1 1 + +CHART opensips.traces '' "OpenSIPS Traces" "traces / sec" traces '' line $((opensips_priority + 17)) $opensips_update_every +DIMENSION siptrace_traced_requests requests incremental 1 1 +DIMENSION siptrace_traced_replies replies incremental -1 1 + +CHART opensips.shmem '' "OpenSIPS Shared Memory" "kilobytes" mem '' line $((opensips_priority + 18)) $opensips_update_every +DIMENSION shmem_total_size total absolute 1 1024 +DIMENSION shmem_used_size used absolute 1 1024 +DIMENSION shmem_real_used_size real_used absolute 1 1024 +DIMENSION shmem_max_used_size max_used absolute 1 1024 +DIMENSION shmem_free_size free absolute 1 1024 + +CHART opensips.shmem_fragments '' "OpenSIPS Shared Memory Fragmentation" "fragments" mem '' line $((opensips_priority + 19)) $opensips_update_every +DIMENSION shmem_fragments fragments absolute 1 1 +EOF + + return 0 +} + +opensips_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + + # 1. get the counters page from opensips + # 2. sed to remove spaces; replace . with _; remove spaces around =; prepend each line with: local opensips_ + # 3. egrep lines starting with: + # local opensips_client_http_ then one or more of these a-z 0-9 _ then = and one of more of 0-9 + # local opensips_server_all_ then one or more of these a-z 0-9 _ then = and one of more of 0-9 + # 4. then execute this as a script with the eval + # be very carefull with eval: + # prepare the script and always grep at the end the lines that are usefull, so that + # even if something goes wrong, no other code can be executed + + unset \ + opensips_dialog_active_dialogs \ + opensips_dialog_early_dialogs \ + opensips_usrloc_registered_users \ + opensips_usrloc_location_users \ + opensips_usrloc_location_contacts \ + opensips_usrloc_location_expires \ + opensips_registrar_accepted_regs \ + opensips_registrar_rejected_regs \ + opensips_tm_UAS_transactions \ + opensips_tm_UAC_transactions \ + opensips_core_rcv_requests \ + opensips_core_rcv_replies \ + opensips_core_fwd_requests \ + opensips_core_fwd_replies \ + opensips_core_drop_requests \ + opensips_core_drop_replies \ + opensips_core_err_requests \ + opensips_core_err_replies \ + opensips_core_bad_URIs_rcvd \ + opensips_core_unsupported_methods \ + opensips_core_bad_msg_hdr \ + opensips_tm_received_replies \ + opensips_tm_relayed_replies \ + opensips_tm_local_replies \ + opensips_tm_2xx_transactions \ + opensips_tm_3xx_transactions \ + opensips_tm_4xx_transactions \ + opensips_tm_5xx_transactions \ + opensips_tm_6xx_transactions \ + opensips_tm_inuse_transactions \ + opensips_sl_1xx_replies \ + opensips_sl_2xx_replies \ + opensips_sl_3xx_replies \ + opensips_sl_4xx_replies \ + opensips_sl_5xx_replies \ + opensips_sl_6xx_replies \ + opensips_sl_sent_replies \ + opensips_sl_sent_err_replies \ + opensips_sl_received_ACKs \ + opensips_dialog_processed_dialogs \ + opensips_dialog_expired_dialogs \ + opensips_dialog_failed_dialogs \ + opensips_net_waiting_udp \ + opensips_net_waiting_tcp \ + opensips_uri_positive_checks \ + opensips_uri_negative_checks \ + opensips_siptrace_traced_requests \ + opensips_siptrace_traced_replies \ + opensips_shmem_total_size \ + opensips_shmem_used_size \ + opensips_shmem_real_used_size \ + opensips_shmem_max_used_size \ + opensips_shmem_free_size \ + opensips_shmem_fragments + + opensips_command_failed=0 + eval "local $(opensips_get_stats)" + # shellcheck disable=SC2181 + [ $? -ne 0 ] && return 1 + + [ $opensips_command_failed -eq 1 ] && error "failed to get values, disabling." && return 1 + + # write the result of the work. + cat <<VALUESEOF +BEGIN opensips.dialogs_active $1 +SET dialog_active_dialogs = $opensips_dialog_active_dialogs +SET dialog_early_dialogs = $opensips_dialog_early_dialogs +END +BEGIN opensips.users $1 +SET usrloc_registered_users = $opensips_usrloc_registered_users +SET usrloc_location_users = $opensips_usrloc_location_users +SET usrloc_location_contacts = $opensips_usrloc_location_contacts +SET usrloc_location_expires = $opensips_usrloc_location_expires +END +BEGIN opensips.registrar $1 +SET registrar_accepted_regs = $opensips_registrar_accepted_regs +SET registrar_rejected_regs = $opensips_registrar_rejected_regs +END +BEGIN opensips.transactions $1 +SET tm_UAS_transactions = $opensips_tm_UAS_transactions +SET tm_UAC_transactions = $opensips_tm_UAC_transactions +END +BEGIN opensips.core_rcv $1 +SET core_rcv_requests = $opensips_core_rcv_requests +SET core_rcv_replies = $opensips_core_rcv_replies +END +BEGIN opensips.core_fwd $1 +SET core_fwd_requests = $opensips_core_fwd_requests +SET core_fwd_replies = $opensips_core_fwd_replies +END +BEGIN opensips.core_drop $1 +SET core_drop_requests = $opensips_core_drop_requests +SET core_drop_replies = $opensips_core_drop_replies +END +BEGIN opensips.core_err $1 +SET core_err_requests = $opensips_core_err_requests +SET core_err_replies = $opensips_core_err_replies +END +BEGIN opensips.core_bad $1 +SET core_bad_URIs_rcvd = $opensips_core_bad_URIs_rcvd +SET core_unsupported_methods = $opensips_core_unsupported_methods +SET core_bad_msg_hdr = $opensips_core_bad_msg_hdr +END +BEGIN opensips.tm_replies $1 +SET tm_received_replies = $opensips_tm_received_replies +SET tm_relayed_replies = $opensips_tm_relayed_replies +SET tm_local_replies = $opensips_tm_local_replies +END +BEGIN opensips.transactions_status $1 +SET tm_2xx_transactions = $opensips_tm_2xx_transactions +SET tm_3xx_transactions = $opensips_tm_3xx_transactions +SET tm_4xx_transactions = $opensips_tm_4xx_transactions +SET tm_5xx_transactions = $opensips_tm_5xx_transactions +SET tm_6xx_transactions = $opensips_tm_6xx_transactions +END +BEGIN opensips.transactions_inuse $1 +SET tm_inuse_transactions = $opensips_tm_inuse_transactions +END +BEGIN opensips.sl_replies $1 +SET sl_1xx_replies = $opensips_sl_1xx_replies +SET sl_2xx_replies = $opensips_sl_2xx_replies +SET sl_3xx_replies = $opensips_sl_3xx_replies +SET sl_4xx_replies = $opensips_sl_4xx_replies +SET sl_5xx_replies = $opensips_sl_5xx_replies +SET sl_6xx_replies = $opensips_sl_6xx_replies +SET sl_sent_replies = $opensips_sl_sent_replies +SET sl_sent_err_replies = $opensips_sl_sent_err_replies +SET sl_received_ACKs = $opensips_sl_received_ACKs +END +BEGIN opensips.dialogs $1 +SET dialog_processed_dialogs = $opensips_dialog_processed_dialogs +SET dialog_expired_dialogs = $opensips_dialog_expired_dialogs +SET dialog_failed_dialogs = $opensips_dialog_failed_dialogs +END +BEGIN opensips.net_waiting $1 +SET net_waiting_udp = $opensips_net_waiting_udp +SET net_waiting_tcp = $opensips_net_waiting_tcp +END +BEGIN opensips.uri_checks $1 +SET uri_positive_checks = $opensips_uri_positive_checks +SET uri_negative_checks = $opensips_uri_negative_checks +END +BEGIN opensips.traces $1 +SET siptrace_traced_requests = $opensips_siptrace_traced_requests +SET siptrace_traced_replies = $opensips_siptrace_traced_replies +END +BEGIN opensips.shmem $1 +SET shmem_total_size = $opensips_shmem_total_size +SET shmem_used_size = $opensips_shmem_used_size +SET shmem_real_used_size = $opensips_shmem_real_used_size +SET shmem_max_used_size = $opensips_shmem_max_used_size +SET shmem_free_size = $opensips_shmem_free_size +END +BEGIN opensips.shmem_fragments $1 +SET shmem_fragments = $opensips_shmem_fragments +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/opensips/opensips.conf b/collectors/charts.d.plugin/opensips/opensips.conf new file mode 100644 index 000000000..e25111dce --- /dev/null +++ b/collectors/charts.d.plugin/opensips/opensips.conf @@ -0,0 +1,21 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +#opensips_opts="fifo get_statistics all" +#opensips_cmd= +#opensips_timeout=2 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#opensips_update_every=5 + +# the charts priority on the dashboard +#opensips_priority=80000 + +# the number of retries to do in case of failure +# before disabling the module +#opensips_retries=10 diff --git a/collectors/charts.d.plugin/phpfpm/Makefile.inc b/collectors/charts.d.plugin/phpfpm/Makefile.inc new file mode 100644 index 000000000..56bff6102 --- /dev/null +++ b/collectors/charts.d.plugin/phpfpm/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += phpfpm/phpfpm.chart.sh +dist_chartsconfig_DATA += phpfpm/phpfpm.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += phpfpm/README.md phpfpm/Makefile.inc + diff --git a/collectors/charts.d.plugin/phpfpm/README.md b/collectors/charts.d.plugin/phpfpm/README.md new file mode 100644 index 000000000..d82951aac --- /dev/null +++ b/collectors/charts.d.plugin/phpfpm/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT diff --git a/collectors/charts.d.plugin/phpfpm/phpfpm.chart.sh b/collectors/charts.d.plugin/phpfpm/phpfpm.chart.sh new file mode 100644 index 000000000..1af7910bc --- /dev/null +++ b/collectors/charts.d.plugin/phpfpm/phpfpm.chart.sh @@ -0,0 +1,198 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# +# Contributed by @safeie with PR #276 + +# first, you need open php-fpm status in php-fpm.conf +# second, you need add status location in nginx.conf +# you can see, https://easyengine.io/tutorials/php/fpm-status-page/ + +declare -A phpfpm_urls=() +declare -A phpfpm_curl_opts=() + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +phpfpm_update_every= +phpfpm_priority=60000 + +declare -a phpfpm_response=() +phpfpm_pool="" +phpfpm_start_time="" +phpfpm_start_since=0 +phpfpm_accepted_conn=0 +phpfpm_listen_queue=0 +phpfpm_max_listen_queue=0 +phpfpm_listen_queue_len=0 +phpfpm_idle_processes=0 +phpfpm_active_processes=0 +phpfpm_total_processes=0 +phpfpm_max_active_processes=0 +phpfpm_max_children_reached=0 +phpfpm_slow_requests=0 +phpfpm_get() { + local opts="${1}" url="${2}" + + # shellcheck disable=SC2207,2086 + phpfpm_response=($(run curl -Ss ${opts} "${url}")) + # shellcheck disable=SC2181 + if [ $? -ne 0 ] || [ "${#phpfpm_response[@]}" -eq 0 ]; then + return 1 + fi + + if [[ "${phpfpm_response[0]}" != "pool:" \ + || "${phpfpm_response[2]}" != "process" \ + || "${phpfpm_response[5]}" != "start" \ + || "${phpfpm_response[12]}" != "accepted" \ + || "${phpfpm_response[15]}" != "listen" \ + || "${phpfpm_response[16]}" != "queue:" \ + || "${phpfpm_response[26]}" != "idle" \ + || "${phpfpm_response[29]}" != "active" \ + || "${phpfpm_response[32]}" != "total" \ + ]] + then + error "invalid response from phpfpm status server: ${phpfpm_response[*]}" + return 1 + fi + + phpfpm_pool="${phpfpm_response[1]}" + phpfpm_start_time="${phpfpm_response[7]} ${phpfpm_response[8]}" + phpfpm_start_since="${phpfpm_response[11]}" + phpfpm_accepted_conn="${phpfpm_response[14]}" + phpfpm_listen_queue="${phpfpm_response[17]}" + phpfpm_max_listen_queue="${phpfpm_response[21]}" + phpfpm_listen_queue_len="${phpfpm_response[25]}" + phpfpm_idle_processes="${phpfpm_response[28]}" + phpfpm_active_processes="${phpfpm_response[31]}" + phpfpm_total_processes="${phpfpm_response[34]}" + phpfpm_max_active_processes="${phpfpm_response[38]}" + phpfpm_max_children_reached="${phpfpm_response[42]}" + if [ "${phpfpm_response[43]}" == "slow" ] + then + phpfpm_slow_requests="${phpfpm_response[45]}" + else + phpfpm_slow_requests="-1" + fi + + if [[ -z "${phpfpm_pool}" \ + || -z "${phpfpm_start_time}" \ + || -z "${phpfpm_start_since}" \ + || -z "${phpfpm_accepted_conn}" \ + || -z "${phpfpm_listen_queue}" \ + || -z "${phpfpm_max_listen_queue}" \ + || -z "${phpfpm_listen_queue_len}" \ + || -z "${phpfpm_idle_processes}" \ + || -z "${phpfpm_active_processes}" \ + || -z "${phpfpm_total_processes}" \ + || -z "${phpfpm_max_active_processes}" \ + || -z "${phpfpm_max_children_reached}" \ + ]] + then + error "empty values got from phpfpm status server: ${phpfpm_response[*]}" + return 1 + fi + + return 0 +} + +# _check is called once, to find out if this chart should be enabled or not +phpfpm_check() { + if [ ${#phpfpm_urls[@]} -eq 0 ]; then + phpfpm_urls[local]="http://localhost/status" + fi + + local m + for m in "${!phpfpm_urls[@]}" + do + phpfpm_get "${phpfpm_curl_opts[$m]}" "${phpfpm_urls[$m]}" + # shellcheck disable=SC2181 + if [ $? -ne 0 ]; then + # shellcheck disable=SC2154 + error "cannot find status on URL '${phpfpm_urls[$m]}'. Please set phpfpm_urls[$m]='http://localhost/status' in $confd/phpfpm.conf" + unset "phpfpm_urls[$m]" + continue + fi + done + + if [ ${#phpfpm_urls[@]} -eq 0 ]; then + error "no phpfpm servers found. Please set phpfpm_urls[name]='url' to whatever needed to get status to the phpfpm server, in $confd/phpfpm.conf" + return 1 + fi + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + return 0 +} + +# _create is called once, to create the charts +phpfpm_create() { + local m + for m in "${!phpfpm_urls[@]}" + do + cat <<EOF +CHART phpfpm_$m.connections '' "PHP-FPM Active Connections" "connections" phpfpm phpfpm.connections line $((phpfpm_priority + 1)) $phpfpm_update_every +DIMENSION active '' absolute 1 1 +DIMENSION maxActive 'max active' absolute 1 1 +DIMENSION idle '' absolute 1 1 + +CHART phpfpm_$m.requests '' "PHP-FPM Requests" "requests/s" phpfpm phpfpm.requests line $((phpfpm_priority + 2)) $phpfpm_update_every +DIMENSION requests '' incremental 1 1 + +CHART phpfpm_$m.performance '' "PHP-FPM Performance" "status" phpfpm phpfpm.performance line $((phpfpm_priority + 3)) $phpfpm_update_every +DIMENSION reached 'max children reached' absolute 1 1 +EOF + if [ $((phpfpm_slow_requests)) -ne -1 ] + then + echo "DIMENSION slow 'slow requests' absolute 1 1" + fi + done + + return 0 +} + +# _update is called continuously, to collect the values +phpfpm_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + local m + for m in "${!phpfpm_urls[@]}" + do + phpfpm_get "${phpfpm_curl_opts[$m]}" "${phpfpm_urls[$m]}" + # shellcheck disable=SC2181 + if [ $? -ne 0 ]; then + continue + fi + + # write the result of the work. + cat <<EOF +BEGIN phpfpm_$m.connections $1 +SET active = $((phpfpm_active_processes)) +SET maxActive = $((phpfpm_max_active_processes)) +SET idle = $((phpfpm_idle_processes)) +END +BEGIN phpfpm_$m.requests $1 +SET requests = $((phpfpm_accepted_conn)) +END +BEGIN phpfpm_$m.performance $1 +SET reached = $((phpfpm_max_children_reached)) +EOF + if [ $((phpfpm_slow_requests)) -ne -1 ] + then + echo "SET slow = $((phpfpm_slow_requests))" + fi + echo "END" + done + + return 0 +} diff --git a/collectors/charts.d.plugin/phpfpm/phpfpm.conf b/collectors/charts.d.plugin/phpfpm/phpfpm.conf new file mode 100644 index 000000000..e4dd0231b --- /dev/null +++ b/collectors/charts.d.plugin/phpfpm/phpfpm.conf @@ -0,0 +1,27 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# first, you need open php-fpm status in php-fpm.conf +# second, you need add status location in nginx.conf +# you can see, https://easyengine.io/tutorials/php/fpm-status-page/ +#phpfpm_urls[name]="" +#phpfpm_curl_opts[name]="" + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#phpfpm_update_every= + +# the charts priority on the dashboard +#phpfpm_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#phpfpm_retries=10 + diff --git a/collectors/charts.d.plugin/postfix/Makefile.inc b/collectors/charts.d.plugin/postfix/Makefile.inc new file mode 100644 index 000000000..6e148352d --- /dev/null +++ b/collectors/charts.d.plugin/postfix/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += postfix/postfix.chart.sh +dist_chartsconfig_DATA += postfix/postfix.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += postfix/README.md postfix/Makefile.inc + diff --git a/collectors/charts.d.plugin/postfix/README.md b/collectors/charts.d.plugin/postfix/README.md new file mode 100644 index 000000000..5fc265d56 --- /dev/null +++ b/collectors/charts.d.plugin/postfix/README.md @@ -0,0 +1,26 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + +# postfix + +The plugin will collect the postfix queue size. + +It will create two charts: + +1. **queue size in emails** +2. **queue size in KB** + +### configuration + +This is the internal default for `/etc/netdata/postfix.conf` + +```sh +# the postqueue command +# if empty, it will use the one found in the system path +postfix_postqueue= + +# how frequently to collect queue size +postfix_update_every=15 +``` + +--- diff --git a/collectors/charts.d.plugin/postfix/postfix.chart.sh b/collectors/charts.d.plugin/postfix/postfix.chart.sh new file mode 100644 index 000000000..8cb938ce1 --- /dev/null +++ b/collectors/charts.d.plugin/postfix/postfix.chart.sh @@ -0,0 +1,89 @@ +# shellcheck shell=bash disable=SC1117 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# the postqueue command +# if empty, it will use the one found in the system path +postfix_postqueue= + +# how frequently to collect queue size +postfix_update_every=15 + +postfix_priority=60000 + +postfix_check() { + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + # try to find the postqueue executable + if [ -z "$postfix_postqueue" ] || [ ! -x "$postfix_postqueue" ] + then + # shellcheck disable=SC2230 + postfix_postqueue="$(which postqueue 2>/dev/null || command -v postqueue 2>/dev/null)" + fi + + if [ -z "$postfix_postqueue" ] || [ ! -x "$postfix_postqueue" ] + then + # shellcheck disable=SC2154 + error "cannot find postqueue. Please set 'postfix_postqueue=/path/to/postqueue' in $confd/postfix.conf" + return 1 + fi + + return 0 +} + +postfix_create() { +cat <<EOF +CHART postfix_local.qemails '' "Postfix Queue Emails" "emails" queue postfix.queued.emails line $((postfix_priority + 1)) $postfix_update_every +DIMENSION emails '' absolute 1 1 +CHART postfix_local.qsize '' "Postfix Queue Emails Size" "emails size in KB" queue postfix.queued.size area $((postfix_priority + 2)) $postfix_update_every +DIMENSION size '' absolute 1 1 +EOF + + return 0 +} + +postfix_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + # 1. execute postqueue -p + # 2. get the line that begins with -- + # 3. match the 2 numbers on the line and output 2 lines like these: + # local postfix_q_size=NUMBER + # local postfix_q_emails=NUMBER + # 4. then execute this a script with the eval + # + # be very carefull with eval: + # prepare the script and always egrep at the end the lines that are usefull, so that + # even if something goes wrong, no other code can be executed + postfix_q_emails=0 + postfix_q_size=0 + + eval "$(run "$postfix_postqueue" -p |\ + grep "^--" |\ + sed -e "s/-- \([0-9]\+\) Kbytes in \([0-9]\+\) Requests.$/local postfix_q_size=\1\nlocal postfix_q_emails=\2/g" |\ + grep -E "^local postfix_q_(emails|size)=[0-9]+$")" + + # write the result of the work. + cat <<VALUESEOF +BEGIN postfix_local.qemails $1 +SET emails = $postfix_q_emails +END +BEGIN postfix_local.qsize $1 +SET size = $postfix_q_size +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/postfix/postfix.conf b/collectors/charts.d.plugin/postfix/postfix.conf new file mode 100644 index 000000000..b77817bd6 --- /dev/null +++ b/collectors/charts.d.plugin/postfix/postfix.conf @@ -0,0 +1,25 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# the postqueue command +# if empty, it will use the one found in the system path +#postfix_postqueue= + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#postfix_update_every=15 + +# the charts priority on the dashboard +#postfix_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#postfix_retries=10 + diff --git a/collectors/charts.d.plugin/sensors/Makefile.inc b/collectors/charts.d.plugin/sensors/Makefile.inc new file mode 100644 index 000000000..f466a1b62 --- /dev/null +++ b/collectors/charts.d.plugin/sensors/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += sensors/sensors.chart.sh +dist_chartsconfig_DATA += sensors/sensors.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += sensors/README.md sensors/Makefile.inc + diff --git a/collectors/charts.d.plugin/sensors/README.md b/collectors/charts.d.plugin/sensors/README.md new file mode 100644 index 000000000..ddc3650d6 --- /dev/null +++ b/collectors/charts.d.plugin/sensors/README.md @@ -0,0 +1,52 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + +> Unlike the python one, this module can collect temperature on RPi. + +# sensors + +The plugin will provide charts for all configured system sensors + +> This plugin is reading sensors directly from the kernel. +> The `lm-sensors` package is able to perform calculations on the +> kernel provided values, this plugin will not perform. +> So, the values graphed, are the raw hardware values of the sensors. + +The plugin will create netdata charts for: + +1. **Temperature** +2. **Voltage** +3. **Current** +4. **Power** +5. **Fans Speed** +6. **Energy** +7. **Humidity** + +One chart for every sensor chip found and each of the above will be created. + +### configuration + +This is the internal default for `/etc/netdata/sensors.conf` + +```sh +# the directory the kernel keeps sensor data +sensors_sys_dir="${NETDATA_HOST_PREFIX}/sys/devices" + +# how deep in the tree to check for sensor data +sensors_sys_depth=10 + +# if set to 1, the script will overwrite internal +# script functions with code generated ones +# leave to 1, is faster +sensors_source_update=1 + +# how frequently to collect sensor data +# the default is to collect it at every iteration of charts.d +sensors_update_every= + +# array of sensors which are excluded +# the default is to include all +sensors_excluded=() +``` + +--- diff --git a/collectors/charts.d.plugin/sensors/sensors.chart.sh b/collectors/charts.d.plugin/sensors/sensors.chart.sh new file mode 100644 index 000000000..54368f1e0 --- /dev/null +++ b/collectors/charts.d.plugin/sensors/sensors.chart.sh @@ -0,0 +1,255 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +# sensors docs +# https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface + +# if this chart is called X.chart.sh, then all functions and global variables +# must start with X_ + +# the directory the kernel keeps sensor data +sensors_sys_dir="${NETDATA_HOST_PREFIX}/sys/devices" + +# how deep in the tree to check for sensor data +sensors_sys_depth=10 + +# if set to 1, the script will overwrite internal +# script functions with code generated ones +# leave to 1, is faster +sensors_source_update=1 + +# how frequently to collect sensor data +# the default is to collect it at every iteration of charts.d +sensors_update_every= + +sensors_priority=90000 + +declare -A sensors_excluded=() + +sensors_find_all_files() { + find "$1" -maxdepth $sensors_sys_depth -name \*_input -o -name temp 2>/dev/null +} + +sensors_find_all_dirs() { + # shellcheck disable=SC2162 + sensors_find_all_files "$1" | while read + do + dirname "$REPLY" + done | sort -u +} + +# _check is called once, to find out if this chart should be enabled or not +sensors_check() { + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + [ -z "$( sensors_find_all_files "$sensors_sys_dir" )" ] && error "no sensors found in '$sensors_sys_dir'." && return 1 + return 0 +} + +sensors_check_files() { + # we only need sensors that report a non-zero value + # also remove not needed sensors + + local f v excluded + for f in "$@" + do + [ ! -f "$f" ] && continue + for ex in "${sensors_excluded[@]}"; do + [[ $f =~ .*$ex$ ]] && excluded='1' && break + done + + [ "$excluded" != "1" ] && v="$( cat "$f" )" || v=0 + v=$(( v + 1 - 1 )) + [ $v -ne 0 ] && echo "$f" && continue + excluded= + + error "$f gives zero values" + done +} + +sensors_check_temp_type() { + # valid temp types are 1 to 6 + # disabled sensors have the value 0 + + local f t v + for f in "$@" + do + # shellcheck disable=SC2001 + t=$( echo "$f" | sed "s|_input$|_type|g" ) + [ "$f" = "$t" ] && echo "$f" && continue + [ ! -f "$t" ] && echo "$f" && continue + + v="$( cat "$t" )" + v=$(( v + 1 - 1 )) + [ $v -ne 0 ] && echo "$f" && continue + + error "$f is disabled" + done +} + +# _create is called once, to create the charts +sensors_create() { + local path dir name x file lfile labelname device subsystem id type mode files multiplier divisor + + # we create a script with the source of the + # sensors_update() function + # - the highest speed we can achieve - + [ $sensors_source_update -eq 1 ] && echo >"$TMP_DIR/sensors.sh" "sensors_update() {" + + for path in $( sensors_find_all_dirs "$sensors_sys_dir" | sort -u ) + do + dir=$( basename "$path" ) + device= + subsystem= + id= + type= + name= + + [ -h "$path/device" ] && device=$( readlink -f "$path/device" ) + [ ! -z "$device" ] && device=$( basename "$device" ) + [ -z "$device" ] && device="$dir" + + [ -h "$path/subsystem" ] && subsystem=$( readlink -f "$path/subsystem" ) + [ ! -z "$subsystem" ] && subsystem=$( basename "$subsystem" ) + [ -z "$subsystem" ] && subsystem="$dir" + + [ -f "$path/name" ] && name=$( cat "$path/name" ) + [ -z "$name" ] && name="$dir" + + [ -f "$path/type" ] && type=$( cat "$path/type" ) + [ -z "$type" ] && type="$dir" + + id="$( fixid "$device.$subsystem.$dir" )" + + debug "path='$path', dir='$dir', device='$device', subsystem='$subsystem', id='$id', name='$name'" + + for mode in temperature voltage fans power current energy humidity + do + files= + multiplier=1 + divisor=1 + algorithm="absolute" + + case $mode in + temperature) + files="$( ls "$path"/temp*_input 2>/dev/null; ls "$path/temp" 2>/dev/null )" + files="$( sensors_check_files "$files" )" + files="$( sensors_check_temp_type "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.temp_$id '' '$name Temperature' 'Celsius' 'temperature' 'sensors.temp' line $((sensors_priority + 1)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.temp_$id \$1\"" + divisor=1000 + ;; + + voltage) + files="$( ls "$path"/in*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.volt_$id '' '$name Voltage' 'Volts' 'voltage' 'sensors.volt' line $((sensors_priority + 2)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.volt_$id \$1\"" + divisor=1000 + ;; + + current) + files="$( ls "$path"/curr*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.curr_$id '' '$name Current' 'Ampere' 'current' 'sensors.curr' line $((sensors_priority + 3)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.curr_$id \$1\"" + divisor=1000 + ;; + + power) + files="$( ls "$path"/power*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.power_$id '' '$name Power' 'Watt' 'power' 'sensors.power' line $((sensors_priority + 4)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.power_$id \$1\"" + divisor=1000000 + ;; + + fans) + files="$( ls "$path"/fan*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.fan_$id '' '$name Fans Speed' 'Rotations / Minute' 'fans' 'sensors.fans' line $((sensors_priority + 5)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.fan_$id \$1\"" + ;; + + energy) + files="$( ls "$path"/energy*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.energy_$id '' '$name Energy' 'Joule' 'energy' 'sensors.energy' areastack $((sensors_priority + 6)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.energy_$id \$1\"" + algorithm="incremental" + divisor=1000000 + ;; + + humidity) + files="$( ls "$path"/humidity*_input 2>/dev/null )" + files="$( sensors_check_files "$files" )" + [ -z "$files" ] && continue + echo "CHART sensors.humidity_$id '' '$name Humidity' 'Percent' 'humidity' 'sensors.humidity' line $((sensors_priority + 7)) $sensors_update_every" + echo >>"$TMP_DIR/sensors.sh" "echo \"BEGIN sensors.humidity_$id \$1\"" + divisor=1000 + ;; + + *) + continue + ;; + esac + + for x in $files + do + file="$x" + fid="$( fixid "$file" )" + lfile="$( basename "$file" | sed "s|_input$|_label|g" )" + labelname="$( basename "$file" | sed "s|_input$||g" )" + + if [ ! "$path/$lfile" = "$file" ] && [ -f "$path/$lfile" ] + then + labelname="$( cat "$path/$lfile" )" + fi + + echo "DIMENSION $fid '$labelname' $algorithm $multiplier $divisor" + echo >>"$TMP_DIR/sensors.sh" "echo \"SET $fid = \"\$(< $file )" + done + + echo >>"$TMP_DIR/sensors.sh" "echo END" + done + done + + [ $sensors_source_update -eq 1 ] && echo >>"$TMP_DIR/sensors.sh" "}" + + # ok, load the function sensors_update() we created + # shellcheck source=/dev/null + [ $sensors_source_update -eq 1 ] && . "$TMP_DIR/sensors.sh" + + return 0 +} + +# _update is called continuously, to collect the values +sensors_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + # shellcheck source=/dev/null + [ $sensors_source_update -eq 0 ] && . "$TMP_DIR/sensors.sh" "$1" + + return 0 +} + diff --git a/collectors/charts.d.plugin/sensors/sensors.conf b/collectors/charts.d.plugin/sensors/sensors.conf new file mode 100644 index 000000000..bcb28807d --- /dev/null +++ b/collectors/charts.d.plugin/sensors/sensors.conf @@ -0,0 +1,32 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# the directory the kernel keeps sensor data +#sensors_sys_dir="/sys/devices" + +# how deep in the tree to check for sensor data +#sensors_sys_depth=10 + +# if set to 1, the script will overwrite internal +# script functions with code generated ones +# leave to 1, is faster +#sensors_source_update=1 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#sensors_update_every= + +# the charts priority on the dashboard +#sensors_priority=90000 + +# the number of retries to do in case of failure +# before disabling the module +#sensors_retries=10 + diff --git a/collectors/charts.d.plugin/squid/Makefile.inc b/collectors/charts.d.plugin/squid/Makefile.inc new file mode 100644 index 000000000..ad470d88c --- /dev/null +++ b/collectors/charts.d.plugin/squid/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += squid/squid.chart.sh +dist_chartsconfig_DATA += squid/squid.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += squid/README.md squid/Makefile.inc + diff --git a/collectors/charts.d.plugin/squid/README.md b/collectors/charts.d.plugin/squid/README.md new file mode 100644 index 000000000..0934ccfcf --- /dev/null +++ b/collectors/charts.d.plugin/squid/README.md @@ -0,0 +1,66 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT + + +# squid + +The plugin will monitor a squid server. + +It will produce 4 charts: + +1. **Squid Client Bandwidth** in kbps + + * in + * out + * hits + +2. **Squid Client Requests** in requests/sec + + * requests + * hits + * errors + +3. **Squid Server Bandwidth** in kbps + + * in + * out + +4. **Squid Server Requests** in requests/sec + + * requests + * errors + +### autoconfig + +The plugin will by itself detect squid servers running on +localhost, on ports 3128 or 8080. + +It will attempt to download URLs in the form: + +- `cache_object://HOST:PORT/counters` +- `/squid-internal-mgr/counters` + +If any succeeds, it will use this. + +### configuration + +If you need to configure it by hand, create the file +`/etc/netdata/squid.conf` with the following variables: + +- `squid_host=IP` the IP of the squid host +- `squid_port=PORT` the port the squid is listening +- `squid_url="URL"` the URL with the statistics to be fetched from squid +- `squid_timeout=SECONDS` how much time we should wait for squid to respond +- `squid_update_every=SECONDS` the frequency of the data collection + +Example `/etc/netdata/squid.conf`: + +```sh +squid_host=127.0.0.1 +squid_port=3128 +squid_url="cache_object://127.0.0.1:3128/counters" +squid_timeout=2 +squid_update_every=5 +``` + +--- diff --git a/collectors/charts.d.plugin/squid/squid.chart.sh b/collectors/charts.d.plugin/squid/squid.chart.sh new file mode 100644 index 000000000..cf5d1d78a --- /dev/null +++ b/collectors/charts.d.plugin/squid/squid.chart.sh @@ -0,0 +1,147 @@ +# shellcheck shell=bash disable=SC2154 +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# + +squid_host= +squid_port= +squid_url= +squid_update_every=2 +squid_priority=60000 + +squid_get_stats_internal() { + local host="$1" port="$2" url="$3" + run squidclient -h "$host" -p "$port" "$url" +} + +squid_get_stats() { + squid_get_stats_internal "$squid_host" "$squid_port" "$squid_url" +} + +squid_autodetect() { + local host="127.0.0.1" port url x + + for port in 3128 8080 + do + for url in "cache_object://$host:$port/counters" "/squid-internal-mgr/counters" + do + x=$(squid_get_stats_internal "$host" "$port" "$url" | grep client_http.requests) + if [ ! -z "$x" ] + then + squid_host="$host" + squid_port="$port" + squid_url="$url" + debug "found squid at '$host:$port' with url '$url'" + return 0 + fi + done + done + + error "cannot find squid running in localhost. Please set squid_url='url' and squid_host='IP' and squid_port='PORT' in $confd/squid.conf" + return 1 +} + +squid_check() { + require_cmd squidclient || return 1 + require_cmd sed || return 1 + require_cmd egrep || return 1 + + if [ -z "$squid_host" ] || [ -z "$squid_port" ] || [ -z "$squid_url" ] + then + squid_autodetect || return 1 + fi + + # check once if the url works + local x + x="$(squid_get_stats | grep client_http.requests)" + # shellcheck disable=SC2181 + if [ ! $? -eq 0 ] || [ -z "$x" ] + then + error "cannot fetch URL '$squid_url' by connecting to $squid_host:$squid_port. Please set squid_url='url' and squid_host='host' and squid_port='port' in $confd/squid.conf" + return 1 + fi + + return 0 +} + +squid_create() { + # create the charts + cat <<EOF +CHART squid_local.clients_net '' "Squid Client Bandwidth" "kilobits / sec" clients squid.clients.net area $((squid_priority + 1)) $squid_update_every +DIMENSION client_http_kbytes_in in incremental 8 1 +DIMENSION client_http_kbytes_out out incremental -8 1 +DIMENSION client_http_hit_kbytes_out hits incremental -8 1 + +CHART squid_local.clients_requests '' "Squid Client Requests" "requests / sec" clients squid.clients.requests line $((squid_priority + 3)) $squid_update_every +DIMENSION client_http_requests requests incremental 1 1 +DIMENSION client_http_hits hits incremental 1 1 +DIMENSION client_http_errors errors incremental -1 1 + +CHART squid_local.servers_net '' "Squid Server Bandwidth" "kilobits / sec" servers squid.servers.net area $((squid_priority + 2)) $squid_update_every +DIMENSION server_all_kbytes_in in incremental 8 1 +DIMENSION server_all_kbytes_out out incremental -8 1 + +CHART squid_local.servers_requests '' "Squid Server Requests" "requests / sec" servers squid.servers.requests line $((squid_priority + 4)) $squid_update_every +DIMENSION server_all_requests requests incremental 1 1 +DIMENSION server_all_errors errors incremental -1 1 +EOF + + return 0 +} + + +squid_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + # 1. get the counters page from squid + # 2. sed to remove spaces; replace . with _; remove spaces around =; prepend each line with: local squid_ + # 3. egrep lines starting with: + # local squid_client_http_ then one or more of these a-z 0-9 _ then = and one of more of 0-9 + # local squid_server_all_ then one or more of these a-z 0-9 _ then = and one of more of 0-9 + # 4. then execute this as a script with the eval + # + # be very carefull with eval: + # prepare the script and always grep at the end the lines that are usefull, so that + # even if something goes wrong, no other code can be executed + + # shellcheck disable=SC1117 + eval "$(squid_get_stats |\ + sed -e "s/ \+/ /g" -e "s/\./_/g" -e "s/^\([a-z0-9_]\+\) *= *\([0-9]\+\)$/local squid_\1=\2/g" |\ + grep -E "^local squid_(client_http|server_all)_[a-z0-9_]+=[0-9]+$")" + + # write the result of the work. + cat <<VALUESEOF +BEGIN squid_local.clients_net $1 +SET client_http_kbytes_in = $squid_client_http_kbytes_in +SET client_http_kbytes_out = $squid_client_http_kbytes_out +SET client_http_hit_kbytes_out = $squid_client_http_hit_kbytes_out +END + +BEGIN squid_local.clients_requests $1 +SET client_http_requests = $squid_client_http_requests +SET client_http_hits = $squid_client_http_hits +SET client_http_errors = $squid_client_http_errors +END + +BEGIN squid_local.servers_net $1 +SET server_all_kbytes_in = $squid_server_all_kbytes_in +SET server_all_kbytes_out = $squid_server_all_kbytes_out +END + +BEGIN squid_local.servers_requests $1 +SET server_all_requests = $squid_server_all_requests +SET server_all_errors = $squid_server_all_errors +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/squid/squid.conf b/collectors/charts.d.plugin/squid/squid.conf new file mode 100644 index 000000000..19e928f25 --- /dev/null +++ b/collectors/charts.d.plugin/squid/squid.conf @@ -0,0 +1,26 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +#squid_host= +#squid_port= +#squid_url= +#squid_timeout=2 + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#squid_update_every=2 + +# the charts priority on the dashboard +#squid_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#squid_retries=10 + diff --git a/collectors/charts.d.plugin/tomcat/Makefile.inc b/collectors/charts.d.plugin/tomcat/Makefile.inc new file mode 100644 index 000000000..ef05b1953 --- /dev/null +++ b/collectors/charts.d.plugin/tomcat/Makefile.inc @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-3.0-or-later + +# THIS IS NOT A COMPLETE Makefile +# IT IS INCLUDED BY ITS PARENT'S Makefile.am +# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT + +# install these files +dist_charts_DATA += tomcat/tomcat.chart.sh +dist_chartsconfig_DATA += tomcat/tomcat.conf + +# do not install these files, but include them in the distribution +dist_noinst_DATA += tomcat/README.md tomcat/Makefile.inc + diff --git a/collectors/charts.d.plugin/tomcat/README.md b/collectors/charts.d.plugin/tomcat/README.md new file mode 100644 index 000000000..d82951aac --- /dev/null +++ b/collectors/charts.d.plugin/tomcat/README.md @@ -0,0 +1,2 @@ +> THIS MODULE IS OBSOLETE. +> USE THE PYTHON ONE - IT SUPPORTS MULTIPLE JOBS AND IT IS MORE EFFICIENT diff --git a/collectors/charts.d.plugin/tomcat/tomcat.chart.sh b/collectors/charts.d.plugin/tomcat/tomcat.chart.sh new file mode 100644 index 000000000..294487b8b --- /dev/null +++ b/collectors/charts.d.plugin/tomcat/tomcat.chart.sh @@ -0,0 +1,150 @@ +# shellcheck shell=bash +# no need for shebang - this file is loaded from charts.d.plugin +# SPDX-License-Identifier: GPL-3.0-or-later + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2016 Costa Tsaousis <costa@tsaousis.gr> +# +# Contributed by @jgeromero with PR #277 + +# Description: Tomcat netdata charts.d plugin +# Author: Jorge Romero + +# the URL to download tomcat status info +# usually http://localhost:8080/manager/status?XML=true +tomcat_url="" +tomcat_curl_opts="" + +# set tomcat username/password here +tomcat_user="" +tomcat_password="" + +# _update_every is a special variable - it holds the number of seconds +# between the calls of the _update() function +tomcat_update_every= + +tomcat_priority=60000 + +# convert tomcat floating point values +# to integer using this multiplier +# this only affects precision - the values +# will be in the proper units +tomcat_decimal_detail=1000000 + +# used by volume chart to convert bytes to KB +tomcat_decimal_KB_detail=1000 + +tomcat_check() { + + require_cmd xmlstarlet || return 1 + + + # check if url, username, passwords are set + if [ -z "${tomcat_url}" ]; then + error "tomcat url is unset or set to the empty string" + return 1 + fi + if [ -z "${tomcat_user}" ]; then + # check backwards compatibility + # shellcheck disable=SC2154 + if [ -z "${tomcatUser}" ]; then + error "tomcat user is unset or set to the empty string" + return 1 + else + tomcat_user="${tomcatUser}" + fi + fi + if [ -z "${tomcat_password}" ]; then + # check backwards compatibility + # shellcheck disable=SC2154 + if [ -z "${tomcatPassword}" ]; then + error "tomcat password is unset or set to the empty string" + return 1 + else + tomcat_password="${tomcatPassword}" + fi + fi + + # check if we can get to tomcat's status page + tomcat_get + # shellcheck disable=2181 + if [ $? -ne 0 ] + then + error "cannot get to status page on URL '${tomcat_url}'. Please make sure tomcat url, username and password are correct." + return 1 + fi + + # this should return: + # - 0 to enable the chart + # - 1 to disable the chart + + return 0 +} + +tomcat_get() { + # collect tomcat values + tomcat_port="$(IFS=/ read -ra a <<< "$tomcat_url"; hostport=${a[2]}; echo "${hostport#*:}")" + mapfile -t lines < <(run curl -u "$tomcat_user":"$tomcat_password" -Ss ${tomcat_curl_opts} "$tomcat_url" |\ + run xmlstarlet sel \ + -t -m "/status/jvm/memory" -v @free \ + -n -m "/status/connector[@name='\"http-bio-$tomcat_port\"']/threadInfo" -v @currentThreadCount \ + -n -v @currentThreadsBusy \ + -n -m "/status/connector[@name='\"http-bio-$tomcat_port\"']/requestInfo" -v @requestCount \ + -n -v @bytesSent -n -) + + tomcat_jvm_freememory="${lines[0]}" + tomcat_threads="${lines[1]}" + tomcat_threads_busy="${lines[2]}" + tomcat_accesses="${lines[3]}" + tomcat_volume="${lines[4]}" + + return 0 +} + +# _create is called once, to create the charts +tomcat_create() { + cat <<EOF +CHART tomcat.accesses '' "tomcat requests" "requests/s" statistics tomcat.accesses area $((tomcat_priority + 8)) $tomcat_update_every +DIMENSION accesses '' incremental +CHART tomcat.volume '' "tomcat volume" "KB/s" volume tomcat.volume area $((tomcat_priority + 5)) $tomcat_update_every +DIMENSION volume '' incremental divisor ${tomcat_decimal_KB_detail} +CHART tomcat.threads '' "tomcat threads" "current threads" statistics tomcat.threads line $((tomcat_priority + 6)) $tomcat_update_every +DIMENSION current '' absolute 1 +DIMENSION busy '' absolute 1 +CHART tomcat.jvm '' "JVM Free Memory" "MB" statistics tomcat.jvm area $((tomcat_priority + 8)) $tomcat_update_every +DIMENSION jvm '' absolute 1 ${tomcat_decimal_detail} +EOF + return 0 +} + +# _update is called continuously, to collect the values +tomcat_update() { + # the first argument to this function is the microseconds since last update + # pass this parameter to the BEGIN statement (see bellow). + + # do all the work to collect / calculate the values + # for each dimension + # remember: KEEP IT SIMPLE AND SHORT + + tomcat_get || return 1 + + # write the result of the work. + cat <<VALUESEOF +BEGIN tomcat.accesses $1 +SET accesses = $((tomcat_accesses)) +END +BEGIN tomcat.volume $1 +SET volume = $((tomcat_volume)) +END +BEGIN tomcat.threads $1 +SET current = $((tomcat_threads)) +SET busy = $((tomcat_threads_busy)) +END +BEGIN tomcat.jvm $1 +SET jvm = $((tomcat_jvm_freememory)) +END +VALUESEOF + + return 0 +} diff --git a/collectors/charts.d.plugin/tomcat/tomcat.conf b/collectors/charts.d.plugin/tomcat/tomcat.conf new file mode 100644 index 000000000..e9f3eefa9 --- /dev/null +++ b/collectors/charts.d.plugin/tomcat/tomcat.conf @@ -0,0 +1,38 @@ +# no need for shebang - this file is loaded from charts.d.plugin + +# netdata +# real-time performance and health monitoring, done right! +# (C) 2018 Costa Tsaousis <costa@tsaousis.gr> +# GPL v3+ + +# THIS PLUGIN IS DEPRECATED +# USE THE PYTHON.D ONE + +# the URL to download tomcat status info +# usually http://localhost:8080/manager/status?XML=true +#tomcat_url="" +#tomcat_curl_opts="" + +# set tomcat username/password here +#tomcat_user="" +#tomcat_password="" + +# the data collection frequency +# if unset, will inherit the netdata update frequency +#tomcat_update_every=1 + +# the charts priority on the dashboard +#tomcat_priority=60000 + +# the number of retries to do in case of failure +# before disabling the module +#tomcat_retries=10 + +# convert tomcat floating point values +# to integer using this multiplier +# this only affects precision - the values +# will be in the proper units +#tomcat_decimal_detail=1000000 + +# used by volume chart to convert bytes to KB +#tomcat_decimal_KB_detail=1000 |