diff options
Diffstat (limited to 'conf.d/python.d')
48 files changed, 0 insertions, 4452 deletions
diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf deleted file mode 100644 index 3bbc3f78..00000000 --- a/conf.d/python.d/apache.conf +++ /dev/null @@ -1,87 +0,0 @@ -# netdata python.d.plugin configuration for apache -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, apache also supports the following: -# -# url: 'URL' # the URL to fetch apache's mod_status stats -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost/server-status?auto' - -localipv4: - name : 'local' - url : 'http://127.0.0.1/server-status?auto' - -localipv6: - name : 'local' - url : 'http://::1/server-status?auto' diff --git a/conf.d/python.d/beanstalk.conf b/conf.d/python.d/beanstalk.conf deleted file mode 100644 index 94080187..00000000 --- a/conf.d/python.d/beanstalk.conf +++ /dev/null @@ -1,80 +0,0 @@ -# netdata python.d.plugin configuration for beanstalk -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# chart_cleanup sets the default chart cleanup interval in iterations. -# A chart is marked as obsolete if it has not been updated -# 'chart_cleanup' iterations in a row. -# When a plugin sends the obsolete flag, the charts are not deleted -# from netdata immediately. -# They will be hidden immediately (not offered to dashboard viewer, -# streamed upstream and archived to backends) and deleted one hour -# later (configurable from netdata.conf). -# chart_cleanup: 10 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# chart_cleanup: 10 # the JOB's chart cleanup interval in iterations -# -# Additionally to the above, apache also supports the following: -# -# host: 'host' # Server ip address or hostname. Default: 127.0.0.1 -# port: port # Beanstalkd port. Default: -# -# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/bind_rndc.conf b/conf.d/python.d/bind_rndc.conf deleted file mode 100644 index 71958ff9..00000000 --- a/conf.d/python.d/bind_rndc.conf +++ /dev/null @@ -1,112 +0,0 @@ -# netdata python.d.plugin configuration for bind_rndc -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, bind_rndc also supports the following: -# -# named_stats_path: 'path to named.stats' # Default: '/var/log/bind/named.stats' -#------------------------------------------------------------------------------------------------------------------ -# IMPORTANT Information -# -# BIND APPEND logs at EVERY RUN. Its NOT RECOMMENDED to set update_every below 30 sec. -# STRONGLY RECOMMENDED to create a bind-rndc conf file for logrotate -# -# To set up your BIND to dump stats do the following: -# -# 1. add to 'named.conf.options' options {}: -# statistics-file "/var/log/bind/named.stats"; -# -# 2. Create bind/ directory in /var/log -# cd /var/log/ && mkdir bind -# -# 3. Change owner of directory to 'bind' user -# chown bind bind/ -# -# 4. RELOAD (NOT restart) BIND -# systemctl reload bind9.service -# -# 5. Run as a root 'rndc stats' to dump (BIND will create named.stats in new directory) -# -# -# To ALLOW NETDATA TO RUN 'rndc stats' change '/etc/bind/rndc.key' group to netdata -# chown :netdata rndc.key -# -# The last BUT NOT least is to create bind-rndc.conf in logrotate.d/ -# The working one -# /var/log/bind/named.stats { -# -# daily -# rotate 4 -# compress -# delaycompress -# create 0644 bind bind -# missingok -# postrotate -# rndc reload > /dev/null -# endscript -# } -# -# To test your logrotate conf file run as root: -# -# logrotate /etc/logrotate.d/bind-rndc -d (debug dry-run mode) -# -# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/ceph.conf b/conf.d/python.d/ceph.conf deleted file mode 100644 index 78ac1e25..00000000 --- a/conf.d/python.d/ceph.conf +++ /dev/null @@ -1,75 +0,0 @@ -# netdata python.d.plugin configuration for ceph stats -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 10 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 10 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, ceph plugin also supports the following: -# -# config_file: 'config_file' # Ceph config file. -# keyring_file: 'keyring_file' # Ceph keyring file. netdata user must be added into ceph group -# # and keyring file must be read group permission. -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -config_file: '/etc/ceph/ceph.conf' -keyring_file: '/etc/ceph/ceph.client.admin.keyring' - diff --git a/conf.d/python.d/chrony.conf b/conf.d/python.d/chrony.conf deleted file mode 100644 index 9ac906b5..00000000 --- a/conf.d/python.d/chrony.conf +++ /dev/null @@ -1,79 +0,0 @@ -# netdata python.d.plugin configuration for chrony -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -update_every: 5 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, chrony also supports the following: -# -# command: 'chrony tracking' # the command to run -# - -# ---------------------------------------------------------------------- -# REQUIRED chrony CONFIGURATION -# -# netdata will query chrony as user netdata. -# verify that user netdata is allowed to call 'chronyc tracking' -# Check cmdallow in chrony.conf -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS - -local: - command: 'chronyc -n tracking' diff --git a/conf.d/python.d/couchdb.conf b/conf.d/python.d/couchdb.conf deleted file mode 100644 index 5f6e75cf..00000000 --- a/conf.d/python.d/couchdb.conf +++ /dev/null @@ -1,91 +0,0 @@ -# netdata python.d.plugin configuration for couchdb -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# By default, CouchDB only updates its stats every 10 seconds. -update_every: 10 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, the couchdb plugin also supports the following: -# -# host: 'ipaddress' # Server ip address or hostname. Default: 127.0.0.1 -# port: 'port' # CouchDB port. Default: 15672 -# scheme: 'scheme' # http or https. Default: http -# node: 'couchdb@127.0.0.1' # CouchDB node name. Same as -name vm.args argument. -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# if db-specific stats are desired, place their names in databases: -# databases: 'npm-registry animaldb' -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -localhost: - name: 'local' - host: '127.0.0.1' - port: '5984' - node: 'couchdb@127.0.0.1' - scheme: 'http' -# user: 'admin' -# pass: 'password' diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf deleted file mode 100644 index 0890245d..00000000 --- a/conf.d/python.d/cpufreq.conf +++ /dev/null @@ -1,43 +0,0 @@ -# netdata python.d.plugin configuration for cpufreq -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# The directory to search for the file scaling_cur_freq -sys_dir: "/sys/devices" diff --git a/conf.d/python.d/dns_query_time.conf b/conf.d/python.d/dns_query_time.conf deleted file mode 100644 index d32c6db8..00000000 --- a/conf.d/python.d/dns_query_time.conf +++ /dev/null @@ -1,71 +0,0 @@ -# netdata python.d.plugin configuration for dns_query_time -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, dns_query_time also supports the following: -# -# dns_servers: 'dns servers' # List of dns servers to query -# domains: 'domains' # List of domains -# aggregate: yes/no # Aggregate all servers in one chart or not -# response_timeout: 4 # Dns query response timeout (query = -100 if response time > response_time) -# -# ----------------------------------------------------------------------
\ No newline at end of file diff --git a/conf.d/python.d/dnsdist.conf b/conf.d/python.d/dnsdist.conf deleted file mode 100644 index aec58b8e..00000000 --- a/conf.d/python.d/dnsdist.conf +++ /dev/null @@ -1,85 +0,0 @@ -# netdata python.d.plugin configuration for dnsdist -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -#update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -#retries: 600000 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -#autodetection_retry: 1 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# -# Additionally to the above, dnsdist also supports the following: -# -# url: 'URL' # the URL to fetch dnsdist performance statistics -# user: 'username' # username for basic auth -# pass: 'password' # password for basic auth -# header: -# X-API-Key: 'Key' # API key -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -# localhost: -# name : 'local' -# url : 'http://127.0.0.1:5053/jsonstat?command=stats' -# user : 'username' -# pass : 'password' -# header: -# X-API-Key: 'dnsdist-api-key' - - diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf deleted file mode 100644 index 56c39499..00000000 --- a/conf.d/python.d/dovecot.conf +++ /dev/null @@ -1,96 +0,0 @@ -# netdata python.d.plugin configuration for dovecot -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, dovecot also supports the following: -# -# socket: 'path/to/dovecot/stats' -# -# or -# host: 'IP or HOSTNAME' # the host to connect to -# port: PORT # the port to connect to -# -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - host : 'localhost' - port : 24242 - -localipv4: - name : 'local' - host : '127.0.0.1' - port : 24242 - -localipv6: - name : 'local' - host : '::1' - port : 24242 - -localsocket: - name : 'local' - socket : '/var/run/dovecot/stats' - diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf deleted file mode 100644 index 213843bf..00000000 --- a/conf.d/python.d/elasticsearch.conf +++ /dev/null @@ -1,83 +0,0 @@ -# netdata python.d.plugin configuration for elasticsearch stats -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, elasticsearch plugin also supports the following: -# -# host: 'ipaddress' # Server ip address or hostname. -# port: 'port' # Port on which elasticsearch listen. -# cluster_health: False/True # Calls to cluster health elasticsearch API. Enabled by default. -# cluster_stats: False/True # Calls to cluster stats elasticsearch API. Enabled by default. -# -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -local: - host: '127.0.0.1' - port: '9200' diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf deleted file mode 100644 index e7fed9b5..00000000 --- a/conf.d/python.d/example.conf +++ /dev/null @@ -1,70 +0,0 @@ -# netdata python.d.plugin configuration for example -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, example also supports the following: -# -# - none -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf deleted file mode 100644 index 2add7b2c..00000000 --- a/conf.d/python.d/exim.conf +++ /dev/null @@ -1,93 +0,0 @@ -# netdata python.d.plugin configuration for exim -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# exim is slow, so once every 10 seconds -update_every: 10 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, exim also supports the following: -# -# command: 'exim -bpc' # the command to run -# - -# ---------------------------------------------------------------------- -# REQUIRED exim CONFIGURATION -# -# netdata will query exim as user netdata. -# By default exim will refuse to respond. -# -# To allow querying exim as non-admin user, please set the following -# to your exim configuration: -# -# queue_list_requires_admin = false -# -# Your exim configuration should be in -# -# /etc/exim/exim4.conf -# or -# /etc/exim4/conf.d/main/000_local_options -# -# Please consult your distribution information to find the exact file. - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS - -local: - command: 'exim -bpc' diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf deleted file mode 100644 index 60ca8723..00000000 --- a/conf.d/python.d/fail2ban.conf +++ /dev/null @@ -1,70 +0,0 @@ -# netdata python.d.plugin configuration for fail2ban -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, fail2ban also supports the following: -# -# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log' -# conf_path: 'path to jail.local/jail.conf' # Default: '/etc/fail2ban/jail.local' -# conf_dir: 'path to jail.d/' # Default: '/etc/fail2ban/jail.d/' -# exclude: 'jails you want to exclude from autodetection' # Default: none -#------------------------------------------------------------------------------------------------------------------ diff --git a/conf.d/python.d/freeradius.conf b/conf.d/python.d/freeradius.conf deleted file mode 100644 index 3336d4c4..00000000 --- a/conf.d/python.d/freeradius.conf +++ /dev/null @@ -1,82 +0,0 @@ -# netdata python.d.plugin configuration for freeradius -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, freeradius also supports the following: -# -# host: 'host' # Default: 'localhost'. Server ip address or hostname. -# port: 'port' # Default: '18121'. Port on which freeradius server listen (type = status). -# secret: 'secret' # Default: 'adminsecret'. -# acct: yes/no # Default: no. Freeradius accounting statistics. -# proxy_auth: yes/no # Default: no. Freeradius proxy authentication statistics. -# proxy_acct: yes/no # Default: no. Freeradius proxy accounting statistics. -# -# ------------------------------------------------------------------------------------------------------------------ -# Freeradius server configuration: -# The configuration for the status server is automatically created in the sites-available directory. -# By default, server is enabled and can be queried from every client. -# FreeRADIUS will only respond to status-server messages, if the status-server virtual server has been enabled. -# To do this, create a link from the sites-enabled directory to the status file in the sites-available directory: -# cd sites-enabled -# ln -s ../sites-available/status status -# and restart/reload your FREERADIUS server. -# ------------------------------------------------------------------------------------------------------------------ diff --git a/conf.d/python.d/go_expvar.conf b/conf.d/python.d/go_expvar.conf deleted file mode 100644 index c352b167..00000000 --- a/conf.d/python.d/go_expvar.conf +++ /dev/null @@ -1,110 +0,0 @@ -# netdata python.d.plugin configuration for go_expvar -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, this plugin also supports the following: -# -# url: 'http://127.0.0.1/debug/vars' # the URL of the expvar endpoint -# -# As the plugin cannot possibly know the port your application listens on, there is no default value. Please include -# the whole path of the endpoint, as the expvar handler can be installed in a non-standard location. -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# collect_memstats: true # enables charts for Go runtime's memory statistics -# extra_charts: {} # defines extra data/charts to monitor, please see the example below -# -# If collect_memstats is disabled and no extra charts are defined, this module will disable itself, as it has no data to -# collect. -# -# Please visit the module wiki page for more information on how to use the extra_charts variable: -# -# https://github.com/firehol/netdata/wiki/Monitoring-Go-Applications#monitoring-custom-vars-with-go_expvar -# -# Configuration example -# --------------------- - -#app1: -# name : 'app1' -# url : 'http://127.0.0.1:8080/debug/vars' -# collect_memstats: true -# extra_charts: -# - id: "runtime_goroutines" -# options: -# name: num_goroutines -# title: "runtime: number of goroutines" -# units: goroutines -# family: runtime -# context: expvar.runtime.goroutines -# chart_type: line -# lines: -# - {expvar_key: 'runtime.goroutines', expvar_type: int, id: runtime_goroutines} -# - id: "foo_counters" -# options: -# name: counters -# title: "some random counters" -# units: awesomeness -# family: counters -# context: expvar.foo.counters -# chart_type: line -# lines: -# - {expvar_key: 'counters.cnt1', expvar_type: int, id: counters_cnt1} -# - {expvar_key: 'counters.cnt2', expvar_type: float, id: counters_cnt2} - diff --git a/conf.d/python.d/haproxy.conf b/conf.d/python.d/haproxy.conf deleted file mode 100644 index a40dd76a..00000000 --- a/conf.d/python.d/haproxy.conf +++ /dev/null @@ -1,85 +0,0 @@ -# netdata python.d.plugin configuration for haproxy -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, haproxy also supports the following: -# -# IMPORTANT: socket MUST BE readable AND writable by netdata user -# -# socket: 'path/to/haproxy/sock' -# -# OR -# url: 'http://<ip.address>:<port>/<url>;csv;norefresh' -# [user: USERNAME] only if stats auth is used -# [pass: PASSWORD] only if stats auth is used - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -#via_url: -# user : 'admin' -# pass : 'password' -# url : 'http://127.0.0.1:7000/haproxy_stats;csv;norefresh' - -#via_socket: -# socket: '/var/run/haproxy/admin.sock' diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf deleted file mode 100644 index 9165798a..00000000 --- a/conf.d/python.d/hddtemp.conf +++ /dev/null @@ -1,97 +0,0 @@ -# netdata python.d.plugin configuration for hddtemp -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, hddtemp also supports the following: -# -# host: 'IP or HOSTNAME' # the host to connect to -# port: PORT # the port to connect to -# - -# By default this module will try to autodetect disks -# (autodetection works only for disk which names start with "sd"). -# However this can be overridden by setting variable `disks` to -# array of desired disks. Example for two disks: -# -# devices: -# - sda -# - sdb -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name: 'local' - host: 'localhost' - port: 7634 - -localipv4: - name: 'local' - host: '127.0.0.1' - port: 7634 - -localipv6: - name: 'local' - host: '::1' - port: 7634 diff --git a/conf.d/python.d/httpcheck.conf b/conf.d/python.d/httpcheck.conf deleted file mode 100644 index 058e057a..00000000 --- a/conf.d/python.d/httpcheck.conf +++ /dev/null @@ -1,99 +0,0 @@ -# netdata python.d.plugin configuration for httpcheck -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the httpcheck default is used, which is at 3 seconds. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# chart_cleanup sets the default chart cleanup interval in iterations. -# A chart is marked as obsolete if it has not been updated -# 'chart_cleanup' iterations in a row. -# They will be hidden immediately (not offered to dashboard viewer, -# streamed upstream and archived to backends) and deleted one hour -# later (configurable from netdata.conf). -# -- For this plugin, cleanup MUST be disabled, otherwise we lose response -# time charts -chart_cleanup: 0 - -# Autodetection and retries do not work for this plugin - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# ------------------------------- -# ATTENTION: Any valid configuration will be accepted, even if initial connection fails! -# ------------------------------- -# -# There is intentionally no default config, e.g. for 'localhost' - -# job_name: -# name: myname # [optional] the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 3 # [optional] the JOB's data collection frequency -# priority: 60000 # [optional] the JOB's order on the dashboard -# retries: 60 # [optional] the JOB's number of restoration attempts -# timeout: 1 # [optional] the timeout when connecting, supports decimals (e.g. 0.5s) -# url: 'http[s]://host-ip-or-dns[:port][path]' -# # [required] the remote host url to connect to. If [:port] is missing, it defaults to 80 -# # for HTTP and 443 for HTTPS. [path] is optional too, defaults to / -# redirect: yes # [optional] If the remote host returns 3xx status codes, the redirection url will be -# # followed (default). -# status_accepted: # [optional] By default, 200 is accepted. Anything else will result in 'bad status' in the -# # status chart, however: The response time will still be > 0, since the -# # host responded with something. -# # If redirect is enabled, the accepted status will be checked against the redirected page. -# - 200 # Multiple status codes are possible. If you specify 'status_accepted', you would still -# # need to add '200'. E.g. 'status_accepted: [301]' will trigger an error in 'bad status' -# # if code is 200. Do specify numerical entries such as 200, not 'OK'. -# regex: None # [optional] If the status code is accepted, the content of the response will be searched for this -# # regex (if defined). Be aware that you may need to escape the regex string. If redirect is enabled, -# # the regex will be matched to the redirected page, not the initial 3xx response. - -# Simple example: -# -# jira: -# url: 'https://jira.localdomain/' - - -# Complex example: -# -# cool_website: -# url: 'http://cool.website:8080/home' -# status_accepted: -# - 200 -# - 204 -# regex: <title>My cool website!<\/title> -# timeout: 2 - -# This plugin is intended for simple cases. Currently, the accuracy of the response time is low and should be used as reference only. - diff --git a/conf.d/python.d/icecast.conf b/conf.d/python.d/icecast.conf deleted file mode 100644 index a900d06d..00000000 --- a/conf.d/python.d/icecast.conf +++ /dev/null @@ -1,83 +0,0 @@ -# netdata python.d.plugin configuration for icecast -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, icecast also supports the following: -# -# url: 'URL' # the URL to fetch icecast's stats -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost:8443/status-json.xsl' - -localipv4: - name : 'local' - url : 'http://127.0.0.1:8443/status-json.xsl'
\ No newline at end of file diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf deleted file mode 100644 index c247c1b7..00000000 --- a/conf.d/python.d/ipfs.conf +++ /dev/null @@ -1,74 +0,0 @@ -# netdata python.d.plugin configuration for ipfs -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, ipfs also supports the following: -# -# url: 'URL' # URL to the IPFS API -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost:5001' diff --git a/conf.d/python.d/isc_dhcpd.conf b/conf.d/python.d/isc_dhcpd.conf deleted file mode 100644 index 4a4c4a5e..00000000 --- a/conf.d/python.d/isc_dhcpd.conf +++ /dev/null @@ -1,81 +0,0 @@ -# netdata python.d.plugin configuration for isc dhcpd leases -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, isc_dhcpd supports the following: -# -# leases_path: 'PATH' # the path to dhcpd.leases file -# pools: -# office: '192.168.2.0/24' # name(dimension): pool in CIDR format -# wifi: '192.168.3.0/24' # name(dimension): pool in CIDR format -# 192.168.4.0/24: '192.168.4.0/24' # name(dimension): pool in CIDR format -# -#----------------------------------------------------------------------- -# IMPORTANT notes -# -# 1. Make sure leases file is readable by netdata. -# 2. Current implementation works only with 'default' db-time-format -# (weekday year/month/day hour:minute:second). -# This is the default, so it will work in most cases. -# 3. Pools MUST BE in CIDR format. -# -# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/mdstat.conf b/conf.d/python.d/mdstat.conf deleted file mode 100644 index 66a2f153..00000000 --- a/conf.d/python.d/mdstat.conf +++ /dev/null @@ -1,32 +0,0 @@ -# netdata python.d.plugin configuration for mdstat -# -# This file is in YaML format. Generally the format is: -# -# name: value -# - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf deleted file mode 100644 index 85c3daf6..00000000 --- a/conf.d/python.d/memcached.conf +++ /dev/null @@ -1,92 +0,0 @@ -# netdata python.d.plugin configuration for memcached -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, memcached also supports the following: -# -# socket: 'path/to/memcached.sock' -# -# or -# host: 'IP or HOSTNAME' # the host to connect to -# port: PORT # the port to connect to -# -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - host : 'localhost' - port : 11211 - -localipv4: - name : 'local' - host : '127.0.0.1' - port : 11211 - -localipv6: - name : 'local' - host : '::1' - port : 11211 - diff --git a/conf.d/python.d/mongodb.conf b/conf.d/python.d/mongodb.conf deleted file mode 100644 index 62faef68..00000000 --- a/conf.d/python.d/mongodb.conf +++ /dev/null @@ -1,84 +0,0 @@ -# netdata python.d.plugin configuration for mongodb -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, mongodb also supports the following: -# -# host: 'IP or HOSTNAME' # type <str> the host to connect to -# port: PORT # type <int> the port to connect to -# -# in all cases, the following can also be set: -# -# user: 'username' # the mongodb username to use -# pass: 'password' # the mongodb password to use -# - -# ---------------------------------------------------------------------- -# to connect to the mongodb on localhost, without a password: -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -local: - name : 'local' - host : '127.0.0.1' - port : 27017 diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf deleted file mode 100644 index b5956a2c..00000000 --- a/conf.d/python.d/mysql.conf +++ /dev/null @@ -1,286 +0,0 @@ -# netdata python.d.plugin configuration for mysql -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, mysql also supports the following: -# -# socket: 'path/to/mysql.sock' -# -# or -# host: 'IP or HOSTNAME' # the host to connect to -# port: PORT # the port to connect to -# -# in all cases, the following can also be set: -# -# user: 'username' # the mysql username to use -# pass: 'password' # the mysql password to use -# - -# ---------------------------------------------------------------------- -# mySQL CONFIGURATION -# -# netdata does not need any privilege - only the ability to connect -# to the mysql server (netdata will not be able to see any data). -# -# Execute these commands to give the local user 'netdata' the ability -# to connect to the mysql server on localhost, without a password: -# -# > create user 'netdata'@'localhost'; -# > grant usage on *.* to 'netdata'@'localhost'; -# > flush privileges; -# -# with the above statements, netdata will be able to gather mysql -# statistics, without the ability to see or alter any data or affect -# mysql operation in any way. No change is required below. -# -# If you need to monitor mysql replication too, use this instead: -# -# > create user 'netdata'@'localhost'; -# > grant replication client on *.* to 'netdata'@'localhost'; -# > flush privileges; -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -mycnf1: - name : 'local' - 'my.cnf' : '/etc/my.cnf' - -mycnf2: - name : 'local' - 'my.cnf' : '/etc/mysql/my.cnf' - -debiancnf: - name : 'local' - 'my.cnf' : '/etc/mysql/debian.cnf' - -socket1: - name : 'local' - # user : '' - # pass : '' - socket : '/var/run/mysqld/mysqld.sock' - -socket2: - name : 'local' - # user : '' - # pass : '' - socket : '/var/run/mysqld/mysql.sock' - -socket3: - name : 'local' - # user : '' - # pass : '' - socket : '/var/lib/mysql/mysql.sock' - -socket4: - name : 'local' - # user : '' - # pass : '' - socket : '/tmp/mysql.sock' - -tcp: - name : 'local' - # user : '' - # pass : '' - host : 'localhost' - port : '3306' - # keep in mind port might be ignored by mysql, if host = 'localhost' - # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844 - -tcpipv4: - name : 'local' - # user : '' - # pass : '' - host : '127.0.0.1' - port : '3306' - -tcpipv6: - name : 'local' - # user : '' - # pass : '' - host : '::1' - port : '3306' - - -# Now we try the same as above with user: root -# A few systems configure mysql to accept passwordless -# root access. - -mycnf1_root: - name : 'local' - user : 'root' - 'my.cnf' : '/etc/my.cnf' - -mycnf2_root: - name : 'local' - user : 'root' - 'my.cnf' : '/etc/mysql/my.cnf' - -socket1_root: - name : 'local' - user : 'root' - # pass : '' - socket : '/var/run/mysqld/mysqld.sock' - -socket2_root: - name : 'local' - user : 'root' - # pass : '' - socket : '/var/run/mysqld/mysql.sock' - -socket3_root: - name : 'local' - user : 'root' - # pass : '' - socket : '/var/lib/mysql/mysql.sock' - -socket4_root: - name : 'local' - user : 'root' - # pass : '' - socket : '/tmp/mysql.sock' - -tcp_root: - name : 'local' - user : 'root' - # pass : '' - host : 'localhost' - port : '3306' - # keep in mind port might be ignored by mysql, if host = 'localhost' - # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844 - -tcpipv4_root: - name : 'local' - user : 'root' - # pass : '' - host : '127.0.0.1' - port : '3306' - -tcpipv6_root: - name : 'local' - user : 'root' - # pass : '' - host : '::1' - port : '3306' - - -# Now we try the same as above with user: netdata - -mycnf1_netdata: - name : 'local' - user : 'netdata' - 'my.cnf' : '/etc/my.cnf' - -mycnf2_netdata: - name : 'local' - user : 'netdata' - 'my.cnf' : '/etc/mysql/my.cnf' - -socket1_netdata: - name : 'local' - user : 'netdata' - # pass : '' - socket : '/var/run/mysqld/mysqld.sock' - -socket2_netdata: - name : 'local' - user : 'netdata' - # pass : '' - socket : '/var/run/mysqld/mysql.sock' - -socket3_netdata: - name : 'local' - user : 'netdata' - # pass : '' - socket : '/var/lib/mysql/mysql.sock' - -socket4_netdata: - name : 'local' - user : 'netdata' - # pass : '' - socket : '/tmp/mysql.sock' - -tcp_netdata: - name : 'local' - user : 'netdata' - # pass : '' - host : 'localhost' - port : '3306' - # keep in mind port might be ignored by mysql, if host = 'localhost' - # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844 - -tcpipv4_netdata: - name : 'local' - user : 'netdata' - # pass : '' - host : '127.0.0.1' - port : '3306' - -tcpipv6_netdata: - name : 'local' - user : 'netdata' - # pass : '' - host : '::1' - port : '3306' - diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf deleted file mode 100644 index 71c52106..00000000 --- a/conf.d/python.d/nginx.conf +++ /dev/null @@ -1,109 +0,0 @@ -# netdata python.d.plugin configuration for nginx -# -# You must have ngx_http_stub_status_module configured on your nginx server for this -# plugin to work. The following is an example config. -# It must be located inside a server { } block. -# -# location /stub_status { -# stub_status; -# # Security: Only allow access from the IP below. -# allow 192.168.1.200; -# # Deny anyone else -# deny all; -# } -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, this plugin also supports the following: -# -# url: 'URL' # the URL to fetch nginx's status stats -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# Example -# -# RemoteNginx: -# name : 'Reverse_Proxy' -# url : 'http://yourdomain.com/stub_status' -# -# "RemoteNginx" will show up in Netdata logs. "Reverse Proxy" will show up in the menu -# in the nginx section. - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost/stub_status' - -localipv4: - name : 'local' - url : 'http://127.0.0.1/stub_status' - -localipv6: - name : 'local' - url : 'http://[::1]/stub_status' - diff --git a/conf.d/python.d/nginx_plus.conf b/conf.d/python.d/nginx_plus.conf deleted file mode 100644 index 7b5c8f43..00000000 --- a/conf.d/python.d/nginx_plus.conf +++ /dev/null @@ -1,87 +0,0 @@ -# netdata python.d.plugin configuration for nginx_plus -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, nginx_plus also supports the following: -# -# url: 'URL' # the URL to fetch nginx_plus's stats -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost/status' - -localipv4: - name : 'local' - url : 'http://127.0.0.1/status' - -localipv6: - name : 'local' - url : 'http://[::1]/status' diff --git a/conf.d/python.d/nsd.conf b/conf.d/python.d/nsd.conf deleted file mode 100644 index 078e9721..00000000 --- a/conf.d/python.d/nsd.conf +++ /dev/null @@ -1,93 +0,0 @@ -# netdata python.d.plugin configuration for nsd -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# nsd-control is slow, so once every 30 seconds -# update_every: 30 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, nsd also supports the following: -# -# command: 'nsd-control stats_noreset' # the command to run -# - -# ---------------------------------------------------------------------- -# IMPORTANT Information -# -# Netdata must have permissions to run `nsd-control stats_noreset` command -# -# - Example-1 (use "sudo") -# 1. sudoers (e.g. visudo -f /etc/sudoers.d/netdata) -# Defaults:netdata !requiretty -# netdata ALL=(ALL) NOPASSWD: /usr/sbin/nsd-control stats_noreset -# 2. etc/netdata/python.d/nsd.conf -# local: -# update_every: 30 -# command: 'sudo /usr/sbin/nsd-control stats_noreset' -# -# - Example-2 (add "netdata" user to "nsd" group) -# usermod -aG nsd netdata -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS - -local: - update_every: 30 - command: 'nsd-control stats_noreset' diff --git a/conf.d/python.d/ntpd.conf b/conf.d/python.d/ntpd.conf deleted file mode 100644 index 7adc4074..00000000 --- a/conf.d/python.d/ntpd.conf +++ /dev/null @@ -1,91 +0,0 @@ -# netdata python.d.plugin configuration for ntpd -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# -# Additionally to the above, ntp also supports the following: -# -# host: 'localhost' # the host to query -# port: '123' # the UDP port where `ntpd` listens -# show_peers: no # use `yes` to show peer charts. enabling this -# # option is recommended only for debugging, as -# # it could possibly imply memory leaks if the -# # peers change frequently. -# peer_filter: '127\..*' # regex to exclude peers -# # by default local peers are hidden -# # use `''` to show all peers. -# peer_rescan: 60 # interval (>0) to check for new/changed peers -# # use `1` to check on every update -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name: 'local' - host: 'localhost' - port: '123' - show_peers: no - -localhost_ipv4: - name: 'local' - host: '127.0.0.1' - port: '123' - show_peers: no - -localhost_ipv6: - name: 'local' - host: '::1' - port: '123' - show_peers: no diff --git a/conf.d/python.d/ovpn_status_log.conf b/conf.d/python.d/ovpn_status_log.conf deleted file mode 100644 index 907f014f..00000000 --- a/conf.d/python.d/ovpn_status_log.conf +++ /dev/null @@ -1,95 +0,0 @@ -# netdata python.d.plugin configuration for openvpn status log -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, openvpn status log also supports the following: -# -# log_path: 'PATH' # the path to openvpn status log file -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -# IMPORTANT information -# -# 1. If you are running multiple OpenVPN instances out of the same directory, MAKE SURE TO EDIT DIRECTIVES which create output files -# so that multiple instances do not overwrite each other's output files. -# 2. Make sure NETDATA USER CAN READ openvpn-status.log -# -# * cd into directory with openvpn-status.log and run the following commands as root -# * #chown :netdata openvpn-status.log && chmod 640 openvpn-status.log -# * To check permission and group membership run -# * #ls -l openvpn-status.log -# -rw-r----- 1 root netdata 359 dec 21 21:22 openvpn-status.log -# -# 3. Update_every interval MUST MATCH interval on which OpenVPN writes operational status to log file. -# If its not true traffic chart WILL DISPLAY WRONG values -# -# Default OpenVPN update interval is 10 second on Debian 8 -# # ps -C openvpn -o command= -# /usr/sbin/openvpn --daemon ovpn-server --status /run/openvpn/server.status 10 --cd /etc/openvpn --config /etc/openvpn/server.conf -# -# -#default: -# log_path: '/var/log/openvpn-status.log' -# -# ----------------------------------------------------------------------
\ No newline at end of file diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf deleted file mode 100644 index 08688e2f..00000000 --- a/conf.d/python.d/phpfpm.conf +++ /dev/null @@ -1,90 +0,0 @@ -# netdata python.d.plugin configuration for PHP-FPM -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, PHP-FPM also supports the following: -# -# url: 'URL' # the URL to fetch nginx's status stats -# # Be sure and include ?full&status at the end of the url -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : "http://localhost/status?full&json" - -localipv4: - name : 'local' - url : "http://127.0.0.1/status?full&json" - -localipv6: - name : 'local' - url : "http://::1/status?full&json" - diff --git a/conf.d/python.d/portcheck.conf b/conf.d/python.d/portcheck.conf deleted file mode 100644 index b3dd8bd3..00000000 --- a/conf.d/python.d/portcheck.conf +++ /dev/null @@ -1,70 +0,0 @@ -# netdata python.d.plugin configuration for portcheck -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# chart_cleanup sets the default chart cleanup interval in iterations. -# A chart is marked as obsolete if it has not been updated -# 'chart_cleanup' iterations in a row. -# They will be hidden immediately (not offered to dashboard viewer, -# streamed upstream and archived to backends) and deleted one hour -# later (configurable from netdata.conf). -# -- For this plugin, cleanup MUST be disabled, otherwise we lose latency chart -chart_cleanup: 0 - -# Autodetection and retries do not work for this plugin - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# ------------------------------- -# ATTENTION: Any valid configuration will be accepted, even if initial connection fails! -# ------------------------------- -# -# There is intentionally no default config for 'localhost' - -# job_name: -# name: myname # [optional] the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # [optional] the JOB's data collection frequency -# priority: 60000 # [optional] the JOB's order on the dashboard -# retries: 60 # [optional] the JOB's number of restoration attempts -# timeout: 1 # [optional] the socket timeout when connecting -# host: 'dns or ip' # [required] the remote host address in either IPv4, IPv6 or as DNS name. -# port: 22 # [required] the port number to check. Specify an integer, not service name. - -# You just have been warned about possible portscan blocking. The portcheck plugin is meant for simple use cases. -# Currently, the accuracy of the latency is low and should be used as reference only. - diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf deleted file mode 100644 index e0d5a5f8..00000000 --- a/conf.d/python.d/postfix.conf +++ /dev/null @@ -1,74 +0,0 @@ -# netdata python.d.plugin configuration for postfix -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# postfix is slow, so once every 10 seconds -update_every: 10 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, postfix also supports the following: -# -# command: 'postqueue -p' # the command to run -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS - -local: - command: 'postqueue -p' diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf deleted file mode 100644 index b69ca371..00000000 --- a/conf.d/python.d/postgres.conf +++ /dev/null @@ -1,124 +0,0 @@ -# netdata python.d.plugin configuration for postgresql -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# A single connection is required in order to pull statistics. -# -# Connections can be configured with the following options: -# -# database : 'example_db_name' -# user : 'example_user' -# password : 'example_pass' -# host : 'localhost' -# port : 5432 -# -# Additionally, the following options allow selective disabling of charts -# -# table_stats : false -# index_stats : false -# database_poll : 'dbase_name1 dbase_name2' # poll only specified databases (all other will be excluded from charts) -# -# Postgres permissions are configured at its pg_hba.conf file. You can -# "trust" local clients to allow netdata to connect, or you can create -# a postgres user for netdata and add its password below to allow -# netdata connect. -# -# Postgres supported versions are : -# - 9.3 (without autovacuum) -# - 9.4 -# - 9.5 -# - 9.6 -# - 10 -# -# Superuser access is needed for theses charts: -# Write-Ahead Logs -# Archive Write-Ahead Logs -# -# Autovacuum charts is allowed since Postgres 9.4 -# ---------------------------------------------------------------------- - -socket: - name : 'local' - user : 'postgres' - database : 'postgres' - -tcp: - name : 'local' - database : 'postgres' - user : 'postgres' - host : 'localhost' - port : 5432 - -tcpipv4: - name : 'local' - database : 'postgres' - user : 'postgres' - host : '127.0.0.1' - port : 5432 - -tcpipv6: - name : 'local' - database : 'postgres' - user : 'postgres' - host : '::1' - port : 5432 - diff --git a/conf.d/python.d/powerdns.conf b/conf.d/python.d/powerdns.conf deleted file mode 100644 index ca6200df..00000000 --- a/conf.d/python.d/powerdns.conf +++ /dev/null @@ -1,78 +0,0 @@ -# netdata python.d.plugin configuration for powerdns -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, apache also supports the following: -# -# url: 'URL' # the URL to fetch powerdns performance statistics -# header: -# X-API-Key: 'Key' # API key -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -# localhost: -# name : 'local' -# url : 'http://127.0.0.1:8081/api/v1/servers/localhost/statistics' -# header: -# X-API-Key: 'change_me' diff --git a/conf.d/python.d/rabbitmq.conf b/conf.d/python.d/rabbitmq.conf deleted file mode 100644 index 3f90da8a..00000000 --- a/conf.d/python.d/rabbitmq.conf +++ /dev/null @@ -1,82 +0,0 @@ -# netdata python.d.plugin configuration for rabbitmq -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, rabbitmq plugin also supports the following: -# -# host: 'ipaddress' # Server ip address or hostname. Default: 127.0.0.1 -# port: 'port' # Rabbitmq port. Default: 15672 -# scheme: 'scheme' # http or https. Default: http -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -local: - host: '127.0.0.1' - user: 'guest' - pass: 'guest' diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf deleted file mode 100644 index 6363f6da..00000000 --- a/conf.d/python.d/redis.conf +++ /dev/null @@ -1,112 +0,0 @@ -# netdata python.d.plugin configuration for redis -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, redis also supports the following: -# -# socket: 'path/to/redis.sock' -# -# or -# host: 'IP or HOSTNAME' # the host to connect to -# port: PORT # the port to connect to -# -# and -# pass: 'password' # the redis password to use for AUTH command -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -socket1: - name : 'local' - socket : '/tmp/redis.sock' - # pass : '' - -socket2: - name : 'local' - socket : '/var/run/redis/redis.sock' - # pass : '' - -socket3: - name : 'local' - socket : '/var/lib/redis/redis.sock' - # pass : '' - -localhost: - name : 'local' - host : 'localhost' - port : 6379 - # pass : '' - -localipv4: - name : 'local' - host : '127.0.0.1' - port : 6379 - # pass : '' - -localipv6: - name : 'local' - host : '::1' - port : 6379 - # pass : '' - diff --git a/conf.d/python.d/retroshare.conf b/conf.d/python.d/retroshare.conf deleted file mode 100644 index 9c92583f..00000000 --- a/conf.d/python.d/retroshare.conf +++ /dev/null @@ -1,74 +0,0 @@ -# netdata python.d.plugin configuration for RetroShare -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, RetroShare also supports the following: -# -# - url: 'url' # the URL to the WebUI -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name: 'local' - url: 'http://localhost:9090' diff --git a/conf.d/python.d/samba.conf b/conf.d/python.d/samba.conf deleted file mode 100644 index ee513c60..00000000 --- a/conf.d/python.d/samba.conf +++ /dev/null @@ -1,62 +0,0 @@ -# netdata python.d.plugin configuration for samba -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -update_every: 5 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds
\ No newline at end of file diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf deleted file mode 100644 index 83bbffd7..00000000 --- a/conf.d/python.d/sensors.conf +++ /dev/null @@ -1,63 +0,0 @@ -# netdata python.d.plugin configuration for sensors -# -# This file is in YaML format. Generally the format is: -# -# name: value -# - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# Limit the number of sensors types. -# Comment the ones you want to disable. -# Also, re-arranging this list controls the order of the charts at the -# netdata dashboard. - -types: - - temperature - - fan - - voltage - - current - - power - - energy - - humidity - -# ---------------------------------------------------------------------- -# Limit the number of sensors chips. -# Uncomment the first line (chips:) and add chip names below it. -# The chip names that start with like that will be matched. -# You can find the chip names using the sensors command. - -#chips: -# - i8k -# - coretemp -# -# chip names can be found using the sensors shell command -# the prefix is matched (anything that starts like that) -# -#---------------------------------------------------------------------- - diff --git a/conf.d/python.d/smartd_log.conf b/conf.d/python.d/smartd_log.conf deleted file mode 100644 index 3fab3f1c..00000000 --- a/conf.d/python.d/smartd_log.conf +++ /dev/null @@ -1,90 +0,0 @@ -# netdata python.d.plugin configuration for smartd log -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, smartd_log also supports the following: -# -# log_path: '/path/to/smartdlogs' # path to smartd log files. Default is /var/log/smartd -# raw_values: yes # enable/disable raw values charts. Enabled by default. -# smart_attributes: '1 2 3 4 44' # smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200']. -# exclude_disks: 'PATTERN1 PATTERN2' # space separated patterns. If the pattern is in the drive name, the module will not collect data for it. -# -# ---------------------------------------------------------------------- -# Additional information -# Plugin reads smartd log files (-A option). -# You need to add (man smartd) to /etc/default/smartmontools '-i 600 -A /var/log/smartd/' to pass additional options to smartd on startup -# Then restart smartd service and check /path/log/smartdlogs -# ls /var/log/smartd/ -# CDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv WDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv ZDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv -# -# Smartd APPEND logs at every run. Its NOT RECOMMENDED to set '-i' option below 60 sec. -# STRONGLY RECOMMENDED to create smartd conf file for logrotate -# -# RAW vs NORMALIZED values -# "Normalized value", commonly referred to as just "value". This is a most universal measurement, on the scale from 0 (bad) to some maximum (good) value. -# Maximum values are typically 100, 200 or 253. Rule of thumb is: high values are good, low values are bad. -# -# "Raw value" - the value of the attribute as it is tracked by the device, before any normalization takes place. -# Some raw numbers provide valuable insight when properly interpreted. These cases will be discussed later on. -# Raw values are typically listed in hexadecimal numbers. The raw value has different structure for different vendors and is often not meaningful as a decimal number. -# -# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/springboot.conf b/conf.d/python.d/springboot.conf deleted file mode 100644 index 40b5fb43..00000000 --- a/conf.d/python.d/springboot.conf +++ /dev/null @@ -1,120 +0,0 @@ -# netdata python.d.plugin configuration for springboot -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, this plugin also supports the following: -# -# url: 'http://127.0.0.1/metrics' # the URL of the spring boot actuator metrics -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# defaults: -# [chart_id]: true | false # enables/disables default charts, defaults true. -# extras: {} # defines extra charts to monitor, please see the example below -# - id: [chart_id] -# options: {} -# lines: [] -# -# If all defaults is disabled and no extra charts are defined, this module will disable itself, as it has no data to -# collect. -# -# Configuration example -# --------------------- -# expample: -# name: 'example' -# url: 'http://localhost:8080/metrics' -# defaults: -# response_code: true -# threads: true -# gc_time: true -# gc_ope: true -# heap: false -# extras: -# - id: 'heap' -# options: { title: 'Heap Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap', charttype: 'stacked' } -# lines: -# - { dimension: 'mem_free', name: 'free'} -# - { dimension: 'mempool_eden_used', name: 'eden', algorithm: 'absolute', multiplier: 1, divisor: 1} -# - { dimension: 'mempool_survivor_used', name: 'survivor', algorithm: 'absolute', multiplier: 1, divisor: 1} -# - { dimension: 'mempool_tenured_used', name: 'tenured', algorithm: 'absolute', multiplier: 1, divisor: 1} -# - id: 'heap_eden' -# options: { title: 'Eden Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_eden', charttype: 'area' } -# lines: -# - { dimension: 'mempool_eden_used', name: 'used'} -# - { dimension: 'mempool_eden_committed', name: 'commited'} -# - id: 'heap_survivor' -# options: { title: 'Survivor Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_survivor', charttype: 'area' } -# lines: -# - { dimension: 'mempool_survivor_used', name: 'used'} -# - { dimension: 'mempool_survivor_committed', name: 'commited'} -# - id: 'heap_tenured' -# options: { title: 'Tenured Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_tenured', charttype: 'area' } -# lines: -# - { dimension: 'mempool_tenured_used', name: 'used'} -# - { dimension: 'mempool_tenured_committed', name: 'commited'} - - -local: - name: 'local' - url: 'http://localhost:8080/metrics' - -local_ip: - name: 'local' - url: 'http://127.0.0.1:8080/metrics' diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf deleted file mode 100644 index 564187f0..00000000 --- a/conf.d/python.d/squid.conf +++ /dev/null @@ -1,169 +0,0 @@ -# netdata python.d.plugin configuration for squid -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, squid also supports the following: -# -# host : 'IP or HOSTNAME' # the host to connect to -# port : PORT # the port to connect to -# request: 'URL' # the URL to request from squid -# - -# ---------------------------------------------------------------------- -# SQUID CONFIGURATION -# -# See: -# http://wiki.squid-cache.org/Features/CacheManager -# -# In short, add to your squid configuration these: -# -# http_access allow localhost manager -# http_access deny manager -# -# To remotely monitor a squid: -# -# acl managerAdmin src 192.0.2.1 -# http_access allow localhost manager -# http_access allow managerAdmin manager -# http_access deny manager -# - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -tcp3128old: - name : 'local' - host : 'localhost' - port : 3128 - request : 'cache_object://localhost:3128/counters' - -tcp8080old: - name : 'local' - host : 'localhost' - port : 8080 - request : 'cache_object://localhost:3128/counters' - -tcp3128new: - name : 'local' - host : 'localhost' - port : 3128 - request : '/squid-internal-mgr/counters' - -tcp8080new: - name : 'local' - host : 'localhost' - port : 8080 - request : '/squid-internal-mgr/counters' - -# IPv4 - -tcp3128oldipv4: - name : 'local' - host : '127.0.0.1' - port : 3128 - request : 'cache_object://127.0.0.1:3128/counters' - -tcp8080oldipv4: - name : 'local' - host : '127.0.0.1' - port : 8080 - request : 'cache_object://127.0.0.1:3128/counters' - -tcp3128newipv4: - name : 'local' - host : '127.0.0.1' - port : 3128 - request : '/squid-internal-mgr/counters' - -tcp8080newipv4: - name : 'local' - host : '127.0.0.1' - port : 8080 - request : '/squid-internal-mgr/counters' - -# IPv6 - -tcp3128oldipv6: - name : 'local' - host : '::1' - port : 3128 - request : 'cache_object://[::1]:3128/counters' - -tcp8080oldipv6: - name : 'local' - host : '::1' - port : 8080 - request : 'cache_object://[::1]:3128/counters' - -tcp3128newipv6: - name : 'local' - host : '::1' - port : 3128 - request : '/squid-internal-mgr/counters' - -tcp8080newipv6: - name : 'local' - host : '::1' - port : 8080 - request : '/squid-internal-mgr/counters' - diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf deleted file mode 100644 index c63f06cf..00000000 --- a/conf.d/python.d/tomcat.conf +++ /dev/null @@ -1,91 +0,0 @@ -# netdata python.d.plugin configuration for tomcat -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, tomcat also supports the following: -# -# url: 'URL' # the URL to fetch nginx's status stats -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# if you have multiple connectors, the following are supported: -# -# connector_name: 'ajp-bio-8009' # default is null, which use first connector in status XML -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) - -localhost: - name : 'local' - url : 'http://localhost:8080/manager/status?XML=true' - -localipv4: - name : 'local' - url : 'http://127.0.0.1:8080/manager/status?XML=true' - -localipv6: - name : 'local' - url : 'http://[::1]:8080/manager/status?XML=true' diff --git a/conf.d/python.d/traefik.conf b/conf.d/python.d/traefik.conf deleted file mode 100644 index 909b9e54..00000000 --- a/conf.d/python.d/traefik.conf +++ /dev/null @@ -1,79 +0,0 @@ -# netdata python.d.plugin configuration for traefik health data API -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 10 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, traefik plugin also supports the following: -# -# url: '<scheme>://<host>:<port>/<health_page_api>' -# # http://localhost:8080/health -# -# if the URL is password protected, the following are supported: -# -# user: 'username' -# pass: 'password' -# -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them will run (they have the same name) -# -local: - url: 'http://localhost:8080/health' diff --git a/conf.d/python.d/varnish.conf b/conf.d/python.d/varnish.conf deleted file mode 100644 index 4b069d51..00000000 --- a/conf.d/python.d/varnish.conf +++ /dev/null @@ -1,64 +0,0 @@ -# netdata python.d.plugin configuration for varnish -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# ---------------------------------------------------------------------- diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf deleted file mode 100644 index c185f8d8..00000000 --- a/conf.d/python.d/web_log.conf +++ /dev/null @@ -1,195 +0,0 @@ -# netdata python.d.plugin configuration for web log -# -# This file is in YaML format. Generally the format is: -# -# name: value -# -# There are 2 sections: -# - global variables -# - one or more JOBS -# -# JOBS allow you to collect values from multiple sources. -# Each source will have its own set of charts. -# -# JOB parameters have to be indented (using spaces only, example below). - -# ---------------------------------------------------------------------- -# Global Variables -# These variables set the defaults for all JOBs, however each JOB -# may define its own, overriding the defaults. - -# update_every sets the default data collection frequency. -# If unset, the python.d.plugin default is used. -# update_every: 1 - -# priority controls the order of charts at the netdata dashboard. -# Lower numbers move the charts towards the top of the page. -# If unset, the default for python.d.plugin is used. -# priority: 60000 - -# retries sets the number of retries to be made in case of failures. -# If unset, the default for python.d.plugin is used. -# Attempts to restore the service are made once every update_every -# and only if the module has collected values in the past. -# retries: 60 - -# autodetection_retry sets the job re-check interval in seconds. -# The job is not deleted if check fails. -# Attempts to start the job are made once every autodetection_retry. -# This feature is disabled by default. -# autodetection_retry: 0 - -# ---------------------------------------------------------------------- -# JOBS (data collection sources) -# -# The default JOBS share the same *name*. JOBS with the same name -# are mutually exclusive. Only one of them will be allowed running at -# any time. This allows autodetection to try several alternatives and -# pick the one that works. -# -# Any number of jobs is supported. - -# ---------------------------------------------------------------------- -# PLUGIN CONFIGURATION -# -# All python.d.plugin JOBS (for all its modules) support a set of -# predefined parameters. These are: -# -# job_name: -# name: myname # the JOB's name as it will appear at the -# # dashboard (by default is the job_name) -# # JOBs sharing a name are mutually exclusive -# update_every: 1 # the JOB's data collection frequency -# priority: 60000 # the JOB's order on the dashboard -# retries: 60 # the JOB's number of restoration attempts -# autodetection_retry: 0 # the JOB's re-check interval in seconds -# -# Additionally to the above, web_log also supports the following: -# -# path: 'PATH' # the path to web server log file -# path: 'PATH[0-9]*[0-9]' # log files with date suffix are also supported -# detailed_response_codes: yes/no # default: yes. Additional chart where response codes are not grouped -# detailed_response_aggregate: yes/no # default: yes. Not aggregated detailed response codes charts -# all_time : yes/no # default: yes. All time unique client IPs chart (50000 addresses ~ 400KB) -# filter: # filter with regex -# include: 'REGEX' # only those rows that matches the regex -# exclude: 'REGEX' # all rows except those that matches the regex -# categories: # requests per url chart configuration -# cacti: 'cacti.*' # name(dimension): REGEX to match -# observium: 'observium.*' # name(dimension): REGEX to match -# stub_status: 'stub_status' # name(dimension): REGEX to match -# user_defined: # requests per pattern in <user_defined> field (custom_log_format) -# cacti: 'cacti.*' # name(dimension): REGEX to match -# observium: 'observium.*' # name(dimension): REGEX to match -# stub_status: 'stub_status' # name(dimension): REGEX to match -# custom_log_format: # define a custom log format -# pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d+\.\d+) ' -# time_multiplier: 1000000 # type <int> - convert time to microseconds -# histogram: [1,3,10,30,100, ...] # type list of int - Cumulative histogram of response time in milli seconds - -# ---------------------------------------------------------------------- -# WEB SERVER CONFIGURATION -# -# Make sure the web server log directory and the web server log files -# can be read by user 'netdata'. -# -# To enable the timings chart and the requests size dimension, the -# web server needs to log them. This is how to add them: -# -# nginx: -# log_format netdata '$remote_addr - $remote_user [$time_local] ' -# '"$request" $status $body_bytes_sent ' -# '$request_length $request_time $upstream_response_time ' -# '"$http_referer" "$http_user_agent"'; -# access_log /var/log/nginx/access.log netdata; -# -# apache (you need mod_logio enabled): -# LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" vhost_netdata -# LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" netdata -# CustomLog "/var/log/apache2/access.log" netdata - -# ---------------------------------------------------------------------- -# AUTO-DETECTION JOBS -# only one of them per web server will run (when they have the same name) - - -# ------------------------------------------- -# nginx log on various distros - -# debian, arch -nginx_log: - name: 'nginx' - path: '/var/log/nginx/access.log' - -# gentoo -nginx_log2: - name: 'nginx' - path: '/var/log/nginx/localhost.access_log' - - -# ------------------------------------------- -# apache log on various distros - -# debian -apache_log: - name: 'apache' - path: '/var/log/apache2/access.log' - -# gentoo -apache_log2: - name: 'apache' - path: '/var/log/apache2/access_log' - -# arch -apache_log3: - name: 'apache' - path: '/var/log/httpd/access_log' - -# debian -apache_vhosts_log: - name: 'apache_vhosts' - path: '/var/log/apache2/other_vhosts_access.log' - - -# ------------------------------------------- -# gunicorn log on various distros - -gunicorn_log: - name: 'gunicorn' - path: '/var/log/gunicorn/access.log' - -gunicorn_log2: - name: 'gunicorn' - path: '/var/log/gunicorn/gunicorn-access.log' - -# ------------------------------------------- -# Apache Cache -apache_cache: - name: 'apache_cache' - type: 'apache_cache' - path: '/var/log/apache/cache.log' - -apache2_cache: - name: 'apache_cache' - type: 'apache_cache' - path: '/var/log/apache2/cache.log' - -httpd_cache: - name: 'apache_cache' - type: 'apache_cache' - path: '/var/log/httpd/cache.log' - -# ------------------------------------------- -# Squid - -# debian/ubuntu -squid_log1: - name: 'squid' - type: 'squid' - path: '/var/log/squid3/access.log' - -#gentoo -squid_log2: - name: 'squid' - type: 'squid' - path: '/var/log/squid/access.log' |