diff options
Diffstat (limited to 'docs/store/change-metrics-storage.md')
| -rw-r--r-- | docs/store/change-metrics-storage.md | 247 |
1 files changed, 176 insertions, 71 deletions
diff --git a/docs/store/change-metrics-storage.md b/docs/store/change-metrics-storage.md index e82393a65..5e14fe247 100644 --- a/docs/store/change-metrics-storage.md +++ b/docs/store/change-metrics-storage.md @@ -1,102 +1,207 @@ -<!-- -title: "Change how long Netdata stores metrics" -description: "With a single configuration change, the Netdata Agent can store days, weeks, or months of metrics at its famous per-second granularity." -custom_edit_url: "https://github.com/netdata/netdata/edit/master/docs/store/change-metrics-storage.md" -sidebar_label: "Change how long Netdata stores metrics" -learn_status: "Published" -learn_topic_type: "Tasks" -learn_rel_path: "Setup" ---> - # Change how long Netdata stores metrics -The Netdata Agent uses a custom made time-series database (TSDB), named the [`dbengine`](https://github.com/netdata/netdata/blob/master/database/engine/README.md), to store metrics. +The Netdata Agent uses a custom made time-series database (TSDB), named the +[`dbengine`](https://github.com/netdata/netdata/blob/master/database/engine/README.md), to store metrics. -The default settings retain approximately two day's worth of metrics on a system collecting 2,000 metrics every second, -but the Netdata Agent is highly configurable if you want your nodes to store days, weeks, or months worth of per-second -data. +To see the number of metrics stored and the retention in days per tier, use the `/api/v1/dbengine_stats` endpoint. -The Netdata Agent uses the following three fundamental settings in `netdata.conf` to change the behavior of the database engine: +To increase or decrease the metric retention time, you just [configure](#configure-metric-retention) +the number of storage tiers and the space allocated to each one. The effect of these two parameters +on the maximum retention and the memory used by Netdata is described in detail, below. + +## Calculate the system resources (RAM, disk space) needed to store metrics + +### Effect of storage tiers and disk space on retention + +3 tiers are enabled by default in Netdata, with the following configuration: -```conf -[global] - dbengine page cache size = 32 - dbengine multihost disk space = 256 - storage tiers = 1 +``` +[db] + mode = dbengine + + # per second data collection + update every = 1 + + # number of tiers used (1 to 5, 3 being default) + storage tiers = 3 + + # Tier 0, per second data + dbengine multihost disk space MB = 256 + + # Tier 1, per minute data + dbengine tier 1 multihost disk space MB = 128 + dbengine tier 1 update every iterations = 60 + + # Tier 2, per hour data + dbengine tier 2 multihost disk space MB = 64 + dbengine tier 2 update every iterations = 60 ``` -`dbengine page cache size` sets the maximum amount of RAM (in MiB) the database engine uses to cache and index recent -metrics. -`dbengine multihost disk space` sets the maximum disk space (again, in MiB) the database engine uses to store -historical, compressed metrics and `storage tiers` specifies the number of storage tiers you want to have in -your `dbengine`. When the size of stored metrics exceeds the allocated disk space, the database engine removes the -oldest metrics on a rolling basis. +The default "update every iterations" of 60 means that if a metric is collected per second in Tier 0, then +we will have a data point every minute in tier 1 and every minute in tier 2. -## Calculate the system resources (RAM, disk space) needed to store metrics +Up to 5 tiers are supported. You may add, or remove tiers and/or modify these multipliers, as long as the +product of all the "update every iterations" does not exceed 65535 (number of points for each tier0 point). + +e.g. If you simply add a fourth tier by setting `storage tiers = 4` and defining the disk space for the new tier, +the product of the "update every iterations" will be 60 * 60 * 60 = 216,000, which is > 65535. So you'd need to reduce +the `update every iterations` of the tiers, to stay under the limit. + +The exact retention that can be achieved by each tier depends on the number of metrics collected. The more +the metrics, the smaller the retention that will fit in a given size. The general rule is that Netdata needs +about **1 byte per data point on disk for tier 0**, and **4 bytes per data point on disk for tier 1 and above**. + +So, for 1000 metrics collected per second and 256 MB for tier 0, Netdata will store about: + +``` +256MB on disk / 1 byte per point / 1000 metrics => 256k points per metric / 86400 sec per day ~= 3 days +``` + +At tier 1 (per minute): + +``` +128MB on disk / 4 bytes per point / 1000 metrics => 32k points per metric / (24 hr * 60 min) ~= 22 days +``` + +At tier 2 (per hour): + +``` +64MB on disk / 4 bytes per point / 1000 metrics => 16k points per metric / 24 hr per day ~= 2 years +``` + +Of course double the metrics, half the retention. There are more factors that affect retention. The number +of ephemeral metrics (i.e. metrics that are collected for part of the time). The number of metrics that are +usually constant over time (affecting compression efficiency). The number of restarts a Netdata Agents gets +through time (because it has to break pages prematurely, increasing the metadata overhead). But the actual +numbers should not deviate significantly from the above. + +To see the number of metrics stored and the retention in days per tier, use the `/api/v1/dbengine_stats` endpoint. -You can store more or less metrics using the database engine by changing the allocated disk space. Use the calculator -below to find the appropriate value for the `dbengine` based on how many metrics your node(s) collect, whether you are -streaming metrics to a parent node, and more. +### Effect of storage tiers and retention on memory usage -You do not need to edit the `dbengine page cache size` setting to store more metrics using the database engine. However, -if you want to store more metrics _specifically in memory_, you can increase the cache size. +The total memory Netdata uses is heavily influenced by the memory consumed by the DBENGINE. +The DBENGINE memory is related to the number of metrics concurrently being collected, the retention of the metrics +on disk in relation with the queries running, and the number of metrics for which retention is maintained. -:::tip +The precise analysis of how much memory will be used by the DBENGINE itself is described in +[DBENGINE memory requirements](https://github.com/netdata/netdata/blob/master/database/engine/README.md#memory-requirements). -We advise you to visit the [tiering mechanism](https://github.com/netdata/netdata/blob/master/database/engine/README.md#tiering) reference. This will help you -configure the Agent to retain metrics for longer periods. +In addition to the DBENGINE, Netdata uses memory for contexts, metric labels (e.g. in a Kubernetes setup), +other Netdata structures/processes (e.g. Health) and system overhead. -::: +The quick rule of thumb, for a high level estimation is -:::caution +``` +DBENGINE memory in MiB = METRICS x (TIERS - 1) x 8 / 1024 MiB +Total Netdata memory in MiB = Metric ephemerality factor x DBENGINE memory in MiB + "dbengine page cache size MB" from netdata.conf +``` + +You can get the currently collected **METRICS** from the "dbengine metrics" chart of the Netdata dashboard. You just need to divide the +value of the "collected" dimension with the number of tiers. For example, at the specific point highlighted in the chart below, 608k metrics +were being collected across all 3 tiers, which means that `METRICS = 608k / 3 = 203667`. + +<img width="988" alt="image" src="https://user-images.githubusercontent.com/43294513/225335899-a9216ba7-a09e-469e-89f6-4690aada69a4.png" /> -This calculator provides an estimation of disk and RAM usage for **metrics usage**. Real-life usage may vary based on -the accuracy of the values you enter below, changes in the compression ratio, and the types of metrics stored. -::: +The **ephemerality factor** is usually between 3 or 4 and depends on how frequently the identifiers of the collected metrics change, increasing their +cardinality. The more ephemeral the infrastructure, the more short-lived metrics you have, increasing the ephemerality factor. If the metric cardinality is +extremely high due for example to a lot of extremely short lived containers (hundreds started every minute), the ephemerality factor can be much higher than 4. +In such cases, we recommend splitting the load across multiple Netdata parents, until we can provide a way to lower the metric cardinality, +by aggregating similar metrics. -Visit the [Netdata Storage Calculator](https://netdata-storage-calculator.herokuapp.com/) app to customize -data retention according to your preferences. +#### Small agent RAM usage -## Edit `netdata.conf` with recommended database engine settings +For 2000 metrics (dimensions) in 3 storage tiers and the default cache size: + +``` +DBENGINE memory for 2k metrics = 2000 x (3 - 1) x 8 / 1024 MiB = 32 MiB +dbengine page cache size MB = 32 MiB +Total Netdata memory in MiB = 3*32 + 32 = 128 MiB (low ephemerality) +``` + +#### Large parent RAM usage + +The Netdata parent in our production infrastructure at the time of writing: + - Collects 206k metrics per second, most from children streaming data + - The metrics include moderately ephemeral Kubernetes containers, leading to an ephemerality factor of about 4 + - 3 tiers are used for retention + - The `dbengine page cache size MB` in `netdata.conf` is configured to be 4GB + +Netdata parents can end up collecting millions of metrics per second. See also [scaling dedicated parent nodes](#scaling-dedicated-parent-nodes). + +The rule of thumb calculation for this set up gives us +``` +DBENGINE memory = 206,000 x 16 / 1024 MiB = 3,217 MiB = about 3 GiB +Extra cache = 4 GiB +Metric ephemerality factor = 4 +Estimated total Netdata memory = 3 * 4 + 4 = 16 GiB +``` -Now that you have a recommended setting for your Agent's `dbengine`, open `netdata.conf` with -[`edit-config`](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#use-edit-config-to-edit-configuration-files) and look for the `[db]` -subsection. Change it to the recommended values you calculated from the calculator. For example: +The actual measurement during a low usage time was the following: + +Purpose|RAM|Note +:--- | ---: | :--- +DBENGINE usage | 5.9 GiB | Out of 7GB max +Cardinality/ephemerality related memory (k8s contexts, labels, strings) | 3.4 GiB +Buffer for queries | 0 GiB | Out of 0.5 GiB max, when heavily queried +Other | 0.5 GiB | +System overhead | 4.4 GiB | Calculated by subtracting all of the above from the total +**Total Netdata memory usage** | 14.2 GiB | + +All the figures above except for the system memory management overhead were retrieved from Netdata itself. +The overhead can't be directly calculated, so we subtracted all the other figures from the total Netdata memory usage to get it. +This overhead is usually around 50% of the memory actually useable by Netdata, but could range from 20% in small +setups, all the way to 100% in some edge cases. + +## Configure metric retention + +Once you have decided how to size each tier, open `netdata.conf` with +[`edit-config`](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#use-edit-config-to-edit-configuration-files) +and make your changes in the `[db]` subsection. + +Save the file and restart the Agent with `sudo systemctl restart netdata`, or +the [appropriate method](https://github.com/netdata/netdata/blob/master/docs/configure/start-stop-restart.md) +for your system, to change the database engine's size. + +## Legacy configuration + +### v1.35.1 and prior + +These versions of the Agent do not support tiers. You could change the metric retention for the parent and +all of its children only with the `dbengine multihost disk space MB` setting. This setting accounts the space allocation +for the parent node and all of its children. + +To configure the database engine, look for the `page cache size MB` and `dbengine multihost disk space MB` settings in +the `[db]` section of your `netdata.conf`. ```conf [db] - mode = dbengine - storage tiers = 3 - update every = 1 - dbengine multihost disk space MB = 1024 - dbengine page cache size MB = 32 - dbengine tier 1 update every iterations = 60 - dbengine tier 1 multihost disk space MB = 384 - dbengine tier 1 page cache size MB = 32 - dbengine tier 2 update every iterations = 60 - dbengine tier 2 multihost disk space MB = 16 - dbengine tier 2 page cache size MB = 32 + dbengine page cache size MB = 32 + dbengine multihost disk space MB = 256 ``` -Save the file and restart the Agent with `sudo systemctl restart netdata`, or -the [appropriate method](https://github.com/netdata/netdata/blob/master/docs/configure/start-stop-restart.md) for your system, to change the database engine's size. +### v1.23.2 and prior + +_For Netdata Agents earlier than v1.23.2_, the Agent on the parent node uses one dbengine instance for itself, and another instance for every child node it receives metrics from. If you had four streaming nodes, you would have five instances in total (`1 parent + 4 child nodes = 5 instances`). -## What's next? +The Agent allocates resources for each instance separately using the `dbengine disk space MB` (**deprecated**) setting. If `dbengine disk space MB`(**deprecated**) is set to the default `256`, each instance is given 256 MiB in disk space, which means the total disk space required to store all instances is, roughly, `256 MiB * 1 parent * 4 child nodes = 1280 MiB`. -If you have multiple nodes with the Netdata Agent installed, you -can [stream metrics](https://github.com/netdata/netdata/blob/master/docs/metrics-storage-management/how-streaming-works.mdx) from any number of _child_ nodes to a _ -parent_ node and store metrics using a centralized time-series database. Streaming allows you to centralize your data, -run Agents as headless collectors, replicate data, and more. +#### Backward compatibility -Storing metrics with the database engine is completely interoperable -with [exporting to other time-series databases](https://github.com/netdata/netdata/blob/master/docs/export/external-databases.md). With exporting, you can use the -node's resources to surface metrics when [viewing dashboards](https://github.com/netdata/netdata/blob/master/docs/visualize/interact-dashboards-charts.md), while also -archiving metrics elsewhere for further analysis, visualization, or correlation with other tools. +All existing metrics belonging to child nodes are automatically converted to legacy dbengine instances and the localhost +metrics are transferred to the multihost dbengine instance. -### Related reference documentation +All new child nodes are automatically transferred to the multihost dbengine instance and share its page cache and disk +space. If you want to migrate a child node from its legacy dbengine instance to the multihost dbengine instance, you +must delete the instance's directory, which is located in `/var/cache/netdata/MACHINE_GUID/dbengine`, after stopping the +Agent. -- [Netdata Agent · Database engine](https://github.com/netdata/netdata/blob/master/database/engine/README.md) -- [Netdata Agent · Database engine configuration option](https://github.com/netdata/netdata/blob/master/daemon/config/README.md#[db]-section-options) +## Scaling dedicated parent nodes +When you use streaming in medium to large infrastructures, you can have potentially millions of metrics per second reaching each parent node. +In the lab we have reliably collected 1 million metrics/sec with 16cores and 32GB RAM. +Our suggestion for scaling parents is to have them running on dedicated VMs, using a maximum of 50% of cpu, and ensuring you have enough RAM +for the desired retention. When your infrastructure can lead a parent to exceed these characteristics, split the load to multiple parents that +do not communicate with each other. With each child sending data to only one of the parents, you can still have replication, high availability, +and infrastructure level observability via the Netdata Cloud UI. |