1 files changed, 0 insertions, 306 deletions
diff --git a/src/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh b/src/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh
deleted file mode 100644
index 58132024b..000000000
--- a/src/collectors/charts.d.plugin/apcupsd/apcupsd.chart.sh
+++ /dev/null
@@ -1,306 +0,0 @@
-# shellcheck shell=bash
-# no need for shebang - this file is loaded from charts.d.plugin
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# netdata
-# real-time performance and health monitoring, done right!
-# (C) 2016 Costa Tsaousis <costa@tsaousis.gr>
-#
-
-apcupsd_ip=
-apcupsd_port=
-
-declare -A apcupsd_sources=(
-  ["local"]="127.0.0.1:3551"
-)
-
-# how frequently to collect UPS data
-apcupsd_update_every=10
-
-apcupsd_timeout=3
-
-# the priority of apcupsd related to other charts
-apcupsd_priority=90000
-
-apcupsd_get() {
-  run -t $apcupsd_timeout apcaccess status "$1"
-}
-
-is_ups_alive() {
-  local status
-  status="$(apcupsd_get "$1" | sed -e 's/STATUS.*: //' -e 't' -e 'd')"
-  case "$status" in
-    "" | "COMMLOST" | "SHUTTING DOWN") return 1 ;;
-    *) return 0 ;;
-  esac
-}
-
-apcupsd_check() {
-
-  # this should return:
-  #  - 0 to enable the chart
-  #  - 1 to disable the chart
-
-  require_cmd apcaccess || return 1
-
-  # backwards compatibility
-  if [ "${apcupsd_ip}:${apcupsd_port}" != ":" ]; then
-    apcupsd_sources["local"]="${apcupsd_ip}:${apcupsd_port}"
-  fi
-
-  local host working=0 failed=0
-  for host in "${!apcupsd_sources[@]}"; do
-    apcupsd_get "${apcupsd_sources[${host}]}" >/dev/null
-    # shellcheck disable=2181
-    if [ $? -ne 0 ]; then
-      error "cannot get information for apcupsd server ${host} on ${apcupsd_sources[${host}]}."
-      failed=$((failed + 1))
-    else
-      if ! is_ups_alive ${apcupsd_sources[${host}]}; then
-        error "APC UPS ${host} on ${apcupsd_sources[${host}]} is not online."
-        failed=$((failed + 1))
-      else
-        working=$((working + 1))
-      fi
-    fi
-  done
-
-  if [ ${working} -eq 0 ]; then
-    error "No APC UPSes found available."
-    return 1
-  fi
-
-  return 0
-}
-
-apcupsd_create() {
-  local host
-  for host in "${!apcupsd_sources[@]}"; do
-    # create the charts
-    cat <<EOF
-CHART apcupsd_${host}.charge '' "UPS Charge" "percentage" ups apcupsd.charge area $((apcupsd_priority + 2)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION battery_charge charge absolute 1 100
-
-CHART apcupsd_${host}.battery_voltage '' "UPS Battery Voltage" "Volts" ups apcupsd.battery.voltage line $((apcupsd_priority + 4)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION battery_voltage voltage absolute 1 100
-DIMENSION battery_voltage_nominal nominal absolute 1 100
-
-CHART apcupsd_${host}.input_voltage '' "UPS Input Voltage" "Volts" input apcupsd.input.voltage line $((apcupsd_priority + 5)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION input_voltage voltage absolute 1 100
-DIMENSION input_voltage_min min absolute 1 100
-DIMENSION input_voltage_max max absolute 1 100
-
-CHART apcupsd_${host}.input_frequency '' "UPS Input Frequency" "Hz" input apcupsd.input.frequency line $((apcupsd_priority + 6)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION input_frequency frequency absolute 1 100
-
-CHART apcupsd_${host}.output_voltage '' "UPS Output Voltage" "Volts" output apcupsd.output.voltage line $((apcupsd_priority + 7)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION output_voltage voltage absolute 1 100
-DIMENSION output_voltage_nominal nominal absolute 1 100
-
-CHART apcupsd_${host}.load '' "UPS Load" "percentage" ups apcupsd.load area $((apcupsd_priority)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION load load absolute 1 100
-
-CHART apcupsd_${host}.load_usage '' "UPS Load Usage" "Watts" ups apcupsd.load_usage area $((apcupsd_priority + 1)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION load_usage load absolute 1 100
-
-CHART apcupsd_${host}.temp '' "UPS Temperature" "Celsius" ups apcupsd.temperature line $((apcupsd_priority + 8)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION temp temp absolute 1 100
-
-CHART apcupsd_${host}.time '' "UPS Time Remaining" "Minutes" ups apcupsd.time area $((apcupsd_priority + 3)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION time time absolute 1 100
-
-CHART apcupsd_${host}.online '' "UPS ONLINE flag" "boolean" ups apcupsd.online line $((apcupsd_priority + 9)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION online online absolute 1 1
-
-CHART apcupsd_${host}.selftest '' "UPS Self-Test status" "status" ups apcupsd.selftest line $((apcupsd_priority + 10)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION selftest_OK 'OK' absolute 1 1
-DIMENSION selftest_NO 'NO' absolute 1 1
-DIMENSION selftest_BT 'BT' absolute 1 1
-DIMENSION selftest_NG 'NG' absolute 1 1
-
-CHART apcupsd_${host}.status '' "UPS Status" "status" ups apcupsd.status line $((apcupsd_priority + 11)) $apcupsd_update_every '' '' 'apcupsd'
-DIMENSION status_ONLINE 'ONLINE' absolute 1 1
-DIMENSION status_ONBATT 'ONBATT' absolute 1 1
-DIMENSION status_OVERLOAD 'OVERLOAD' absolute 1 1
-DIMENSION status_LOWBATT 'LOWBATT' absolute 1 1
-DIMENSION status_REPLACEBATT 'REPLACEBATT' absolute 1 1
-DIMENSION status_NOBATT 'NOBATT' absolute 1 1
-DIMENSION status_SLAVE 'SLAVE' absolute 1 1
-DIMENSION status_SLAVEDOWN 'SLAVEDOWN' absolute 1 1
-DIMENSION status_COMMLOST 'COMMLOST' absolute 1 1
-DIMENSION status_CAL 'CAL' absolute 1 1
-DIMENSION status_TRIM 'TRIM' absolute 1 1
-DIMENSION status_BOOST 'BOOST' absolute 1 1
-DIMENSION status_SHUTTING_DOWN 'SHUTTING_DOWN' absolute 1 1
-
-EOF
-  done
-  return 0
-}
-
-apcupsd_update() {
-  # the first argument to this function is the microseconds since last update
-  # pass this parameter to the BEGIN statement (see below).
-
-  # do all the work to collect / calculate the values
-  # for each dimension
-  # remember: KEEP IT SIMPLE AND SHORT
-
-  local host working=0 failed=0
-  for host in "${!apcupsd_sources[@]}"; do
-    apcupsd_get "${apcupsd_sources[${host}]}" | awk "
-
-BEGIN {
-  battery_charge = 0;
-  battery_voltage = 0;
-  battery_voltage_nominal = 0;
-  input_voltage = 0;
-  input_voltage_min = 0;
-  input_voltage_max = 0;
-  input_frequency = 0;
-  output_voltage = 0;
-  output_voltage_nominal = 0;
-  load = 0;
-  temp = 0;
-  time = 0;
-  online = 0;
-  nompower = 0;
-  load_usage = 0;
-  selftest_OK = 0;
-  selftest_NO = 0;
-  selftest_BT = 0;
-  selftest_NG = 0;
-  status_ONLINE = 0;
-  status_CAL = 0;
-  status_TRIM = 0;
-  status_BOOST = 0;
-  status_ONBATT = 0;
-  status_OVERLOAD = 0;
-  status_LOWBATT = 0;
-  status_REPLACEBATT = 0;
-  status_NOBATT = 0;
-  status_SLAVE = 0;
-  status_SLAVEDOWN = 0;
-  status_COMMLOST = 0;
-  status_SHUTTING_DOWN = 0;
-
-}
-/^BCHARGE.*/   { battery_charge = \$3 * 100 };
-/^BATTV.*/     { battery_voltage = \$3 * 100 };
-/^NOMBATTV.*/  { battery_voltage_nominal = \$3 * 100 };
-/^LINEV.*/     { input_voltage = \$3 * 100 };
-/^MINLINEV.*/  { input_voltage_min = \$3 * 100 };
-/^MAXLINEV.*/  { input_voltage_max = \$3 * 100 };
-/^LINEFREQ.*/  { input_frequency = \$3 * 100 };
-/^OUTPUTV.*/   { output_voltage = \$3 * 100 };
-/^NOMOUTV.*/   { output_voltage_nominal = \$3 * 100 };
-/^LOADPCT.*/   { load = \$3 * 100 };
-/^ITEMP.*/     { temp = \$3 * 100 };
-/^NOMPOWER.*/  { nompower = \$3 };
-/^TIMELEFT.*/  { time = \$3 * 100 };
-/^STATUS.*/    { online=(\$0 !~ \"COMMLOST\" && \$0 !~ \"SHUTTING\") ? 1 : 0; };
-/^SELFTEST.*/  { selftest_OK = (\$3 == \"OK\") ? 1 : 0;
-                 selftest_NO = (\$3 == \"NO\") ? 1 : 0;
-                 selftest_BT = (\$3 == \"BT\") ? 1 : 0;
-                 selftest_NG = (\$3 == \"NG\") ? 1 : 0;
-               };
-/^STATUS.*/    { status_ONLINE = (\$0 ~ \"ONLINE\") ? 1 : 0;
-                 status_CAL = (\$0 ~ \"CAL\") ? 1 : 0;
-                 status_TRIM = (\$0 ~ \"TRIM\") ? 1 : 0;
-                 status_BOOST = (\$0 ~ \"BOOST\") ? 1 : 0;
-                 status_ONBATT = (\$0 ~ \"ONBATT\") ? 1 : 0;
-                 status_OVERLOAD = (\$0 ~ \"OVERLOAD\") ? 1 : 0;
-                 status_LOWBATT = (\$0 ~ \"LOWBATT\") ? 1 : 0;
-                 status_REPLACEBATT = (\$0 ~ \"REPLACEBATT\") ? 1 : 0;
-                 status_NOBATT = (\$0 ~ \"NOBATT\") ? 1 : 0;
-                 status_SLAVE = (\$0 ~ \"SLAVE( |$)\") ? 1 : 0;
-                 status_SLAVEDOWN = (\$0 ~ \"SLAVEDOWN\") ? 1 : 0;
-                 status_COMMLOST = (\$0 ~ \"COMMLOST\") ? 1 : 0;
-                 status_SHUTTING_DOWN = (\$0 ~ \"SHUTTING\") ? 1 : 0;
-               };
-
-END {
-  { load_usage = nompower * load / 100 };
-
-  print \"BEGIN apcupsd_${host}.online $1\";
-  print \"SET online = \" online;
-  print \"END\"
-
-  if (online == 1) {
-    print \"BEGIN apcupsd_${host}.charge $1\";
-    print \"SET battery_charge = \" battery_charge;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.battery_voltage $1\";
-    print \"SET battery_voltage = \" battery_voltage;
-    print \"SET battery_voltage_nominal = \" battery_voltage_nominal;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.input_voltage $1\";
-    print \"SET input_voltage = \" input_voltage;
-    print \"SET input_voltage_min = \" input_voltage_min;
-    print \"SET input_voltage_max = \" input_voltage_max;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.input_frequency $1\";
-    print \"SET input_frequency = \" input_frequency;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.output_voltage $1\";
-    print \"SET output_voltage = \" output_voltage;
-    print \"SET output_voltage_nominal = \" output_voltage_nominal;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.load $1\";
-    print \"SET load = \" load;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.load_usage $1\";
-    print \"SET load_usage = \" load_usage;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.temp $1\";
-    print \"SET temp = \" temp;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.time $1\";
-    print \"SET time = \" time;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.selftest $1\";
-    print \"SET selftest_OK = \" selftest_OK;
-    print \"SET selftest_NO = \" selftest_NO;
-    print \"SET selftest_BT = \" selftest_BT;
-    print \"SET selftest_NG = \" selftest_NG;
-    print \"END\"
-
-    print \"BEGIN apcupsd_${host}.status $1\";
-    print \"SET status_ONLINE = \" status_ONLINE;
-    print \"SET status_ONBATT = \" status_ONBATT;
-    print \"SET status_OVERLOAD = \" status_OVERLOAD;
-    print \"SET status_LOWBATT = \" status_LOWBATT;
-    print \"SET status_REPLACEBATT = \" status_REPLACEBATT;
-    print \"SET status_NOBATT = \" status_NOBATT;
-    print \"SET status_SLAVE = \" status_SLAVE;
-    print \"SET status_SLAVEDOWN = \" status_SLAVEDOWN;
-    print \"SET status_COMMLOST = \" status_COMMLOST;
-    print \"SET status_CAL = \" status_CAL;
-    print \"SET status_TRIM = \" status_TRIM;
-    print \"SET status_BOOST = \" status_BOOST;
-    print \"SET status_SHUTTING_DOWN = \" status_SHUTTING_DOWN;
-    print \"END\";
-  }
-}"
-    # shellcheck disable=SC2181
-    if [ $? -ne 0 ]; then
-      failed=$((failed + 1))
-      error "failed to get values for APC UPS ${host} on ${apcupsd_sources[${host}]}" && return 1
-    else
-      working=$((working + 1))
-    fi
-  done
-
-  [ $working -eq 0 ] && error "failed to get values from all APC UPSes" && return 1
-
-  return 0
-}