summaryrefslogtreecommitdiffstats
path: root/LzmaDec.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--LzmaDec.h191
1 files changed, 191 insertions, 0 deletions
diff --git a/LzmaDec.h b/LzmaDec.h
new file mode 100644
index 0000000..2a7741f
--- /dev/null
+++ b/LzmaDec.h
@@ -0,0 +1,191 @@
+/* LzmaDec.h -- LZMA Decoder
+2009-02-07 : Igor Pavlov : Public domain */
+
+#ifndef __LZMA_DEC_H
+#define __LZMA_DEC_H
+
+#include "Types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* #define _LZMA_PROB32 */
+/* _LZMA_PROB32 can increase the speed on some CPUs,
+ but memory usage for CLzmaDec::probs will be doubled in that case */
+
+#ifdef _LZMA_PROB32
+#define CLzmaProb UInt32
+#else
+#define CLzmaProb UInt16
+#endif
+
+
+/* ---------- LZMA Properties ---------- */
+
+#define LZMA_PROPS_SIZE 5
+
+typedef struct _CLzmaProps
+{
+ unsigned lc, lp, pb;
+ UInt32 dicSize;
+} CLzmaProps;
+
+/* LzmaProps_Decode - decodes properties
+Returns:
+ SZ_OK
+ SZ_ERROR_UNSUPPORTED - Unsupported properties
+*/
+
+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+
+
+/* ---------- LZMA Decoder state ---------- */
+
+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
+
+#define LZMA_REQUIRED_INPUT_MAX 20
+
+typedef struct
+{
+ CLzmaProps prop;
+ CLzmaProb *probs;
+ Byte *dic;
+ const Byte *buf;
+ UInt32 range, code;
+ SizeT dicPos;
+ SizeT dicBufSize;
+ UInt32 processedPos;
+ UInt32 checkDicSize;
+ unsigned state;
+ UInt32 reps[4];
+ unsigned remainLen;
+ int needFlush;
+ int needInitState;
+ UInt32 numProbs;
+ unsigned tempBufSize;
+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
+} CLzmaDec;
+
+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+
+void LzmaDec_Init(CLzmaDec *p);
+
+/* There are two types of LZMA streams:
+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+
+typedef enum
+{
+ LZMA_FINISH_ANY, /* finish at any point */
+ LZMA_FINISH_END /* block must be finished at the end */
+} ELzmaFinishMode;
+
+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
+
+ You must use LZMA_FINISH_END, when you know that current output buffer
+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
+
+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
+ and output value of destLen will be less than output buffer size limit.
+ You can check status result also.
+
+ You can use multiple checks to test data integrity after full decompression:
+ 1) Check Result and "status" variable.
+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
+ You must use correct finish mode in that case. */
+
+typedef enum
+{
+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
+} ELzmaStatus;
+
+/* ELzmaStatus is used only as output value for function call */
+
+
+/* ---------- Interfaces ---------- */
+
+/* There are 3 levels of interfaces:
+ 1) Dictionary Interface
+ 2) Buffer Interface
+ 3) One Call Interface
+ You can select any of these interfaces, but don't mix functions from different
+ groups for same object. */
+
+
+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+
+/* ---------- Dictionary Interface ---------- */
+
+/* You can use it, if you want to eliminate the overhead for data copying from
+ dictionary to some other external buffer.
+ You must work with CLzmaDec variables directly in this interface.
+
+ STEPS:
+ LzmaDec_Constr()
+ LzmaDec_Allocate()
+ for (each new stream)
+ {
+ LzmaDec_Init()
+ while (it needs more decompression)
+ {
+ LzmaDec_DecodeToDic()
+ use data from CLzmaDec::dic and update CLzmaDec::dicPos
+ }
+ }
+ LzmaDec_Free()
+*/
+
+/* LzmaDec_DecodeToDic
+
+ The decoding to internal dictionary buffer (CLzmaDec::dic).
+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (dicLimit).
+ LZMA_FINISH_ANY - Decode just dicLimit bytes.
+ LZMA_FINISH_END - Stream must be finished after dicLimit.
+
+Returns:
+ SZ_OK
+ status:
+ LZMA_STATUS_FINISHED_WITH_MARK
+ LZMA_STATUS_NOT_FINISHED
+ LZMA_STATUS_NEEDS_MORE_INPUT
+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+ SZ_ERROR_DATA - Data error
+*/
+
+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+/* ---------- Buffer Interface ---------- */
+
+/* It's zlib-like interface.
+ See LzmaDec_DecodeToDic description for information about STEPS and return results,
+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+ to work with CLzmaDec variables manually.
+
+finishMode:
+ It has meaning only if the decoding reaches output limit (*destLen).
+ LZMA_FINISH_ANY - Decode just destLen bytes.
+ LZMA_FINISH_END - Stream must be finished after (*destLen).
+*/
+
+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif