diff options
Diffstat (limited to '')
| -rw-r--r-- | LzmaDec.h | 281 |
1 files changed, 90 insertions, 191 deletions
@@ -1,191 +1,90 @@ -/* LzmaDec.h -- LZMA Decoder
-2009-02-07 : Igor Pavlov : Public domain */
-
-#ifndef __LZMA_DEC_H
-#define __LZMA_DEC_H
-
-#include "Types.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* #define _LZMA_PROB32 */
-/* _LZMA_PROB32 can increase the speed on some CPUs,
- but memory usage for CLzmaDec::probs will be doubled in that case */
-
-#ifdef _LZMA_PROB32
-#define CLzmaProb UInt32
-#else
-#define CLzmaProb UInt16
-#endif
-
-
-/* ---------- LZMA Properties ---------- */
-
-#define LZMA_PROPS_SIZE 5
-
-typedef struct _CLzmaProps
-{
- unsigned lc, lp, pb;
- UInt32 dicSize;
-} CLzmaProps;
-
-/* LzmaProps_Decode - decodes properties
-Returns:
- SZ_OK
- SZ_ERROR_UNSUPPORTED - Unsupported properties
-*/
-
-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-
-
-/* ---------- LZMA Decoder state ---------- */
-
-/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
- Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-
-#define LZMA_REQUIRED_INPUT_MAX 20
-
-typedef struct
-{
- CLzmaProps prop;
- CLzmaProb *probs;
- Byte *dic;
- const Byte *buf;
- UInt32 range, code;
- SizeT dicPos;
- SizeT dicBufSize;
- UInt32 processedPos;
- UInt32 checkDicSize;
- unsigned state;
- UInt32 reps[4];
- unsigned remainLen;
- int needFlush;
- int needInitState;
- UInt32 numProbs;
- unsigned tempBufSize;
- Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-} CLzmaDec;
-
-#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-
-void LzmaDec_Init(CLzmaDec *p);
-
-/* There are two types of LZMA streams:
- 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
- 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-
-typedef enum
-{
- LZMA_FINISH_ANY, /* finish at any point */
- LZMA_FINISH_END /* block must be finished at the end */
-} ELzmaFinishMode;
-
-/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-
- You must use LZMA_FINISH_END, when you know that current output buffer
- covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-
- If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
- and output value of destLen will be less than output buffer size limit.
- You can check status result also.
-
- You can use multiple checks to test data integrity after full decompression:
- 1) Check Result and "status" variable.
- 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
- 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
- You must use correct finish mode in that case. */
-
-typedef enum
-{
- LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
- LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
- LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
- LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
-} ELzmaStatus;
-
-/* ELzmaStatus is used only as output value for function call */
-
-
-/* ---------- Interfaces ---------- */
-
-/* There are 3 levels of interfaces:
- 1) Dictionary Interface
- 2) Buffer Interface
- 3) One Call Interface
- You can select any of these interfaces, but don't mix functions from different
- groups for same object. */
-
-
-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-
-/* ---------- Dictionary Interface ---------- */
-
-/* You can use it, if you want to eliminate the overhead for data copying from
- dictionary to some other external buffer.
- You must work with CLzmaDec variables directly in this interface.
-
- STEPS:
- LzmaDec_Constr()
- LzmaDec_Allocate()
- for (each new stream)
- {
- LzmaDec_Init()
- while (it needs more decompression)
- {
- LzmaDec_DecodeToDic()
- use data from CLzmaDec::dic and update CLzmaDec::dicPos
- }
- }
- LzmaDec_Free()
-*/
-
-/* LzmaDec_DecodeToDic
-
- The decoding to internal dictionary buffer (CLzmaDec::dic).
- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-
-finishMode:
- It has meaning only if the decoding reaches output limit (dicLimit).
- LZMA_FINISH_ANY - Decode just dicLimit bytes.
- LZMA_FINISH_END - Stream must be finished after dicLimit.
-
-Returns:
- SZ_OK
- status:
- LZMA_STATUS_FINISHED_WITH_MARK
- LZMA_STATUS_NOT_FINISHED
- LZMA_STATUS_NEEDS_MORE_INPUT
- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
- SZ_ERROR_DATA - Data error
-*/
-
-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-
-/* ---------- Buffer Interface ---------- */
-
-/* It's zlib-like interface.
- See LzmaDec_DecodeToDic description for information about STEPS and return results,
- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
- to work with CLzmaDec variables manually.
-
-finishMode:
- It has meaning only if the decoding reaches output limit (*destLen).
- LZMA_FINISH_ANY - Decode just destLen bytes.
- LZMA_FINISH_END - Stream must be finished after (*destLen).
-*/
-
-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* LzmaDec.h -- LZMA Decoder +2009-02-07 : Igor Pavlov : Public domain */ + +/* ---------- LZMA Properties ---------- */ + +#define LZMA_PROPS_SIZE 5 + + +/* ---------- LZMA Decoder state ---------- */ + +/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. + Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ + +#define LZMA_REQUIRED_INPUT_MAX 20 + +typedef struct +{ + int *probs; + uint8_t *dic; + const uint8_t *buf; + uint32_t range, code; + uint32_t dicPos; + uint32_t dicBufSize; + uint32_t processedPos; + uint32_t checkDicSize; + unsigned lc, lp, pb; + State state; + uint32_t reps[4]; + unsigned remainLen; + uint32_t numProbs; + unsigned tempBufSize; + bool needFlush; + uint8_t tempBuf[LZMA_REQUIRED_INPUT_MAX]; +} CLzmaDec; + + +/* There are two types of LZMA streams: + 0) Stream with end mark. That end mark adds about 6 bytes to compressed size. + 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */ + +typedef enum +{ + LZMA_FINISH_ANY, /* finish at any point */ + LZMA_FINISH_END /* block must be finished at the end */ +} ELzmaFinishMode; + +/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! + + You must use LZMA_FINISH_END, when you know that current output buffer + covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. + + If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, + and output value of destLen will be less than output buffer size limit. + You can check status result also. + + You can use multiple checks to test data integrity after full decompression: + 1) Check Result and "status" variable. + 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. + 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. + You must use correct finish mode in that case. */ + +typedef enum +{ + LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ + LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ + LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ + LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ +} ELzmaStatus; + +/* ELzmaStatus is used only as output value for function call */ + + +bool LzmaDec_Init(CLzmaDec *p, const uint8_t *raw_props); +void LzmaDec_Free(CLzmaDec *p); + + +/* ---------- Buffer Interface ---------- */ + +/* It's zlib-like interface. + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). +*/ + +bool LzmaDec_DecodeToBuf( CLzmaDec *p, uint8_t *dest, uint32_t *destLen, + const uint8_t *src, uint32_t *srcLen, + ELzmaFinishMode finishMode, ELzmaStatus *status ); |