Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 292 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
new file mode 100644
index 000000000..aacc4aa80
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -0,0 +1,292 @@
+/*******************************************************************************
+  This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+  DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
+  developing this code.
+
+  This contains the functions to handle the dma.
+
+  Copyright (C) 2007-2009  STMicroelectronics Ltd
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <asm/io.h>
+#include "dwmac1000.h"
+#include "dwmac_dma.h"
+
+static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
+{
+	u32 value = readl(ioaddr + DMA_AXI_BUS_MODE);
+	int i;
+
+	pr_info("dwmac1000: Master AXI performs %s burst length\n",
+		!(value & DMA_AXI_UNDEF) ? "fixed" : "any");
+
+	if (axi->axi_lpi_en)
+		value |= DMA_AXI_EN_LPI;
+	if (axi->axi_xit_frm)
+		value |= DMA_AXI_LPI_XIT_FRM;
+
+	value &= ~DMA_AXI_WR_OSR_LMT;
+	value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) <<
+		 DMA_AXI_WR_OSR_LMT_SHIFT;
+
+	value &= ~DMA_AXI_RD_OSR_LMT;
+	value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) <<
+		 DMA_AXI_RD_OSR_LMT_SHIFT;
+
+	/* Depending on the UNDEF bit the Master AXI will perform any burst
+	 * length according to the BLEN programmed (by default all BLEN are
+	 * set).
+	 */
+	for (i = 0; i < AXI_BLEN; i++) {
+		switch (axi->axi_blen[i]) {
+		case 256:
+			value |= DMA_AXI_BLEN256;
+			break;
+		case 128:
+			value |= DMA_AXI_BLEN128;
+			break;
+		case 64:
+			value |= DMA_AXI_BLEN64;
+			break;
+		case 32:
+			value |= DMA_AXI_BLEN32;
+			break;
+		case 16:
+			value |= DMA_AXI_BLEN16;
+			break;
+		case 8:
+			value |= DMA_AXI_BLEN8;
+			break;
+		case 4:
+			value |= DMA_AXI_BLEN4;
+			break;
+		}
+	}
+
+	writel(value, ioaddr + DMA_AXI_BUS_MODE);
+}
+
+static void dwmac1000_dma_init(void __iomem *ioaddr,
+			       struct stmmac_dma_cfg *dma_cfg, int atds)
+{
+	u32 value = readl(ioaddr + DMA_BUS_MODE);
+	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+
+	/*
+	 * Set the DMA PBL (Programmable Burst Length) mode.
+	 *
+	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
+	 * post 3.5 mode bit acts as 8*PBL.
+	 */
+	if (dma_cfg->pblx8)
+		value |= DMA_BUS_MODE_MAXPBL;
+	value |= DMA_BUS_MODE_USP;
+	value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+	value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+	value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+	/* Set the Fixed burst mode */
+	if (dma_cfg->fixed_burst)
+		value |= DMA_BUS_MODE_FB;
+
+	/* Mixed Burst has no effect when fb is set */
+	if (dma_cfg->mixed_burst)
+		value |= DMA_BUS_MODE_MB;
+
+	if (atds)
+		value |= DMA_BUS_MODE_ATDS;
+
+	if (dma_cfg->aal)
+		value |= DMA_BUS_MODE_AAL;
+
+	writel(value, ioaddr + DMA_BUS_MODE);
+
+	/* Mask interrupts by writing to CSR7 */
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
+
+static void dwmac1000_dma_init_rx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  u32 dma_rx_phy, u32 chan)
+{
+	/* RX descriptor base address list must be written into DMA CSR3 */
+	writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR);
+}
+
+static void dwmac1000_dma_init_tx(void __iomem *ioaddr,
+				  struct stmmac_dma_cfg *dma_cfg,
+				  u32 dma_tx_phy, u32 chan)
+{
+	/* TX descriptor base address list must be written into DMA CSR4 */
+	writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR);
+}
+
+static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
+{
+	csr6 &= ~DMA_CONTROL_RFA_MASK;
+	csr6 &= ~DMA_CONTROL_RFD_MASK;
+
+	/* Leave flow control disabled if receive fifo size is less than
+	 * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full,
+	 * and send XON when 2K less than full.
+	 */
+	if (rxfifosz < 4096) {
+		csr6 &= ~DMA_CONTROL_EFC;
+		pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n",
+			 rxfifosz);
+	} else {
+		csr6 |= DMA_CONTROL_EFC;
+		csr6 |= RFA_FULL_MINUS_1K;
+		csr6 |= RFD_FULL_MINUS_2K;
+	}
+	return csr6;
+}
+
+static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (mode == SF_DMA_MODE) {
+		pr_debug("GMAC: enable RX store and forward mode\n");
+		csr6 |= DMA_CONTROL_RSF;
+	} else {
+		pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode);
+		csr6 &= ~DMA_CONTROL_RSF;
+		csr6 &= DMA_CONTROL_TC_RX_MASK;
+		if (mode <= 32)
+			csr6 |= DMA_CONTROL_RTC_32;
+		else if (mode <= 64)
+			csr6 |= DMA_CONTROL_RTC_64;
+		else if (mode <= 96)
+			csr6 |= DMA_CONTROL_RTC_96;
+		else
+			csr6 |= DMA_CONTROL_RTC_128;
+	}
+
+	/* Configure flow control based on rx fifo size */
+	csr6 = dwmac1000_configure_fc(csr6, fifosz);
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode,
+					    u32 channel, int fifosz, u8 qmode)
+{
+	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+	if (mode == SF_DMA_MODE) {
+		pr_debug("GMAC: enable TX store and forward mode\n");
+		/* Transmit COE type 2 cannot be done in cut-through mode. */
+		csr6 |= DMA_CONTROL_TSF;
+		/* Operating on second frame increase the performance
+		 * especially when transmit store-and-forward is used.
+		 */
+		csr6 |= DMA_CONTROL_OSF;
+	} else {
+		pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode);
+		csr6 &= ~DMA_CONTROL_TSF;
+		csr6 &= DMA_CONTROL_TC_TX_MASK;
+		/* Set the transmit threshold */
+		if (mode <= 32)
+			csr6 |= DMA_CONTROL_TTC_32;
+		else if (mode <= 64)
+			csr6 |= DMA_CONTROL_TTC_64;
+		else if (mode <= 128)
+			csr6 |= DMA_CONTROL_TTC_128;
+		else if (mode <= 192)
+			csr6 |= DMA_CONTROL_TTC_192;
+		else
+			csr6 |= DMA_CONTROL_TTC_256;
+	}
+
+	writel(csr6, ioaddr + DMA_CONTROL);
+}
+
+static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space)
+{
+	int i;
+
+	for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++)
+		if ((i < 12) || (i > 17))
+			reg_space[DMA_BUS_MODE / 4 + i] =
+				readl(ioaddr + DMA_BUS_MODE + i * 4);
+}
+
+static void dwmac1000_get_hw_feature(void __iomem *ioaddr,
+				     struct dma_features *dma_cap)
+{
+	u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE);
+
+	dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL);
+	dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1;
+	dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2;
+	dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4;
+	dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5;
+	dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6;
+	dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8;
+	dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9;
+	dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10;
+	/* MMC */
+	dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11;
+	/* IEEE 1588-2002 */
+	dma_cap->time_stamp =
+	    (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12;
+	/* IEEE 1588-2008 */
+	dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13;
+	/* 802.3az - Energy-Efficient Ethernet (EEE) */
+	dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14;
+	dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15;
+	/* TX and RX csum */
+	dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16;
+	dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17;
+	dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18;
+	dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19;
+	/* TX and RX number of channels */
+	dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20;
+	dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22;
+	/* Alternate (enhanced) DESC mode */
+	dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24;
+}
+
+static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt,
+				  u32 number_chan)
+{
+	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
+}
+
+const struct stmmac_dma_ops dwmac1000_dma_ops = {
+	.reset = dwmac_dma_reset,
+	.init = dwmac1000_dma_init,
+	.init_rx_chan = dwmac1000_dma_init_rx,
+	.init_tx_chan = dwmac1000_dma_init_tx,
+	.axi = dwmac1000_dma_axi,
+	.dump_regs = dwmac1000_dump_dma_regs,
+	.dma_rx_mode = dwmac1000_dma_operation_mode_rx,
+	.dma_tx_mode = dwmac1000_dma_operation_mode_tx,
+	.enable_dma_transmission = dwmac_enable_dma_transmission,
+	.enable_dma_irq = dwmac_enable_dma_irq,
+	.disable_dma_irq = dwmac_disable_dma_irq,
+	.start_tx = dwmac_dma_start_tx,
+	.stop_tx = dwmac_dma_stop_tx,
+	.start_rx = dwmac_dma_start_rx,
+	.stop_rx = dwmac_dma_stop_rx,
+	.dma_interrupt = dwmac_dma_interrupt,
+	.get_hw_feature = dwmac1000_get_hw_feature,
+	.rx_watchdog = dwmac1000_rx_watchdog,
+};