Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 1210 insertions, 0 deletions

diff --git a/drivers/nfc/microread/Kconfig b/drivers/nfc/microread/Kconfig
new file mode 100644
index 000000000..2c6dbc9f6
--- /dev/null
+++ b/drivers/nfc/microread/Kconfig
@@ -0,0 +1,31 @@
+config NFC_MICROREAD
+	tristate
+	select CRC_CCITT
+	---help---
+	  This module contains the main code for Inside Secure microread
+	  NFC chipsets. It implements the chipset HCI logic and hooks into
+	  the NFC kernel APIs. Physical layers will register against it.
+
+config NFC_MICROREAD_I2C
+	tristate "Inside Secure Microread device support (I2C)"
+	depends on NFC_HCI && I2C && NFC_SHDLC
+	select NFC_MICROREAD
+	---help---
+	  This module adds support for the i2c interface of adapters using
+	  Inside microread chipsets.  Select this if your platform is using
+	  the i2c bus.
+
+	  If you choose to build a module, it'll be called microread_i2c.
+	  Say N if unsure.
+
+config NFC_MICROREAD_MEI
+	tristate "Inside Secure Microread device support (MEI)"
+	depends on NFC_HCI && NFC_MEI_PHY
+	select NFC_MICROREAD
+	---help---
+	  This module adds support for the mei interface of adapters using
+	  Inside microread chipsets.  Select this if your microread chipset
+	  is handled by Intel's Management Engine Interface on your platform.
+
+	  If you choose to build a module, it'll be called microread_mei.
+	  Say N if unsure.
diff --git a/drivers/nfc/microread/Makefile b/drivers/nfc/microread/Makefile
new file mode 100644
index 000000000..2f7dda265
--- /dev/null
+++ b/drivers/nfc/microread/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Microread HCI based NFC driver
+#
+
+microread_i2c-objs  = i2c.o
+microread_mei-objs  = mei.o
+
+obj-$(CONFIG_NFC_MICROREAD)     += microread.o
+obj-$(CONFIG_NFC_MICROREAD_I2C) += microread_i2c.o
+obj-$(CONFIG_NFC_MICROREAD_MEI) += microread_mei.o
diff --git a/drivers/nfc/microread/i2c.c b/drivers/nfc/microread/i2c.c
new file mode 100644
index 000000000..1806d20a5
--- /dev/null
+++ b/drivers/nfc/microread/i2c.c
@@ -0,0 +1,315 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
+ *
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+#define MICROREAD_I2C_DRIVER_NAME "microread"
+
+#define MICROREAD_I2C_FRAME_HEADROOM 1
+#define MICROREAD_I2C_FRAME_TAILROOM 1
+
+/* framing in HCI mode */
+#define MICROREAD_I2C_LLC_LEN		1
+#define MICROREAD_I2C_LLC_CRC		1
+#define MICROREAD_I2C_LLC_LEN_CRC	(MICROREAD_I2C_LLC_LEN + \
+					MICROREAD_I2C_LLC_CRC)
+#define MICROREAD_I2C_LLC_MIN_SIZE	(1 + MICROREAD_I2C_LLC_LEN_CRC)
+#define MICROREAD_I2C_LLC_MAX_PAYLOAD	29
+#define MICROREAD_I2C_LLC_MAX_SIZE	(MICROREAD_I2C_LLC_LEN_CRC + 1 + \
+					MICROREAD_I2C_LLC_MAX_PAYLOAD)
+
+struct microread_i2c_phy {
+	struct i2c_client *i2c_dev;
+	struct nfc_hci_dev *hdev;
+
+	int hard_fault;		/*
+				 * < 0 if hardware error occured (e.g. i2c err)
+				 * and prevents normal operation.
+				 */
+};
+
+#define I2C_DUMP_SKB(info, skb)					\
+do {								\
+	pr_debug("%s:\n", info);				\
+	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
+		       16, 1, (skb)->data, (skb)->len, 0);	\
+} while (0)
+
+static void microread_i2c_add_len_crc(struct sk_buff *skb)
+{
+	int i;
+	u8 crc = 0;
+	int len;
+
+	len = skb->len;
+	*(u8 *)skb_push(skb, 1) = len;
+
+	for (i = 0; i < skb->len; i++)
+		crc = crc ^ skb->data[i];
+
+	skb_put_u8(skb, crc);
+}
+
+static void microread_i2c_remove_len_crc(struct sk_buff *skb)
+{
+	skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
+	skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
+}
+
+static int check_crc(struct sk_buff *skb)
+{
+	int i;
+	u8 crc = 0;
+
+	for (i = 0; i < skb->len - 1; i++)
+		crc = crc ^ skb->data[i];
+
+	if (crc != skb->data[skb->len-1]) {
+		pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);
+		pr_info("%s: BAD CRC\n", __func__);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int microread_i2c_enable(void *phy_id)
+{
+	return 0;
+}
+
+static void microread_i2c_disable(void *phy_id)
+{
+	return;
+}
+
+static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+	int r;
+	struct microread_i2c_phy *phy = phy_id;
+	struct i2c_client *client = phy->i2c_dev;
+
+	if (phy->hard_fault != 0)
+		return phy->hard_fault;
+
+	usleep_range(3000, 6000);
+
+	microread_i2c_add_len_crc(skb);
+
+	I2C_DUMP_SKB("i2c frame written", skb);
+
+	r = i2c_master_send(client, skb->data, skb->len);
+
+	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
+		usleep_range(6000, 10000);
+		r = i2c_master_send(client, skb->data, skb->len);
+	}
+
+	if (r >= 0) {
+		if (r != skb->len)
+			r = -EREMOTEIO;
+		else
+			r = 0;
+	}
+
+	microread_i2c_remove_len_crc(skb);
+
+	return r;
+}
+
+
+static int microread_i2c_read(struct microread_i2c_phy *phy,
+			      struct sk_buff **skb)
+{
+	int r;
+	u8 len;
+	u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
+	struct i2c_client *client = phy->i2c_dev;
+
+	r = i2c_master_recv(client, &len, 1);
+	if (r != 1) {
+		nfc_err(&client->dev, "cannot read len byte\n");
+		return -EREMOTEIO;
+	}
+
+	if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
+	    (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
+		nfc_err(&client->dev, "invalid len byte\n");
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	*skb = alloc_skb(1 + len, GFP_KERNEL);
+	if (*skb == NULL) {
+		r = -ENOMEM;
+		goto flush;
+	}
+
+	skb_put_u8(*skb, len);
+
+	r = i2c_master_recv(client, skb_put(*skb, len), len);
+	if (r != len) {
+		kfree_skb(*skb);
+		return -EREMOTEIO;
+	}
+
+	I2C_DUMP_SKB("cc frame read", *skb);
+
+	r = check_crc(*skb);
+	if (r != 0) {
+		kfree_skb(*skb);
+		r = -EBADMSG;
+		goto flush;
+	}
+
+	skb_pull(*skb, 1);
+	skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
+
+	usleep_range(3000, 6000);
+
+	return 0;
+
+flush:
+	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
+		r = -EREMOTEIO;
+
+	usleep_range(3000, 6000);
+
+	return r;
+}
+
+static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
+{
+	struct microread_i2c_phy *phy = phy_id;
+	struct sk_buff *skb = NULL;
+	int r;
+
+	if (!phy || irq != phy->i2c_dev->irq) {
+		WARN_ON_ONCE(1);
+		return IRQ_NONE;
+	}
+
+	if (phy->hard_fault != 0)
+		return IRQ_HANDLED;
+
+	r = microread_i2c_read(phy, &skb);
+	if (r == -EREMOTEIO) {
+		phy->hard_fault = r;
+
+		nfc_hci_recv_frame(phy->hdev, NULL);
+
+		return IRQ_HANDLED;
+	} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
+		return IRQ_HANDLED;
+	}
+
+	nfc_hci_recv_frame(phy->hdev, skb);
+
+	return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+	.write = microread_i2c_write,
+	.enable = microread_i2c_enable,
+	.disable = microread_i2c_disable,
+};
+
+static int microread_i2c_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	struct microread_i2c_phy *phy;
+	int r;
+
+	dev_dbg(&client->dev, "client %p\n", client);
+
+	phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
+			   GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, phy);
+	phy->i2c_dev = client;
+
+	r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
+				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				 MICROREAD_I2C_DRIVER_NAME, phy);
+	if (r) {
+		nfc_err(&client->dev, "Unable to register IRQ handler\n");
+		return r;
+	}
+
+	r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+			    MICROREAD_I2C_FRAME_HEADROOM,
+			    MICROREAD_I2C_FRAME_TAILROOM,
+			    MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
+	if (r < 0)
+		goto err_irq;
+
+	nfc_info(&client->dev, "Probed\n");
+
+	return 0;
+
+err_irq:
+	free_irq(client->irq, phy);
+
+	return r;
+}
+
+static int microread_i2c_remove(struct i2c_client *client)
+{
+	struct microread_i2c_phy *phy = i2c_get_clientdata(client);
+
+	microread_remove(phy->hdev);
+
+	free_irq(client->irq, phy);
+
+	return 0;
+}
+
+static const struct i2c_device_id microread_i2c_id[] = {
+	{ MICROREAD_I2C_DRIVER_NAME, 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
+
+static struct i2c_driver microread_i2c_driver = {
+	.driver = {
+		.name = MICROREAD_I2C_DRIVER_NAME,
+	},
+	.probe		= microread_i2c_probe,
+	.remove		= microread_i2c_remove,
+	.id_table	= microread_i2c_id,
+};
+
+module_i2c_driver(microread_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c
new file mode 100644
index 000000000..eb5eddf17
--- /dev/null
+++ b/drivers/nfc/microread/mei.c
@@ -0,0 +1,88 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "../mei_phy.h"
+#include "microread.h"
+
+#define MICROREAD_DRIVER_NAME "microread"
+
+static int microread_mei_probe(struct mei_cl_device *cldev,
+			       const struct mei_cl_device_id *id)
+{
+	struct nfc_mei_phy *phy;
+	int r;
+
+	pr_info("Probing NFC microread\n");
+
+	phy = nfc_mei_phy_alloc(cldev);
+	if (!phy) {
+		pr_err("Cannot allocate memory for microread mei phy.\n");
+		return -ENOMEM;
+	}
+
+	r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME,
+			    MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD,
+			    &phy->hdev);
+	if (r < 0) {
+		nfc_mei_phy_free(phy);
+
+		return r;
+	}
+
+	return 0;
+}
+
+static int microread_mei_remove(struct mei_cl_device *cldev)
+{
+	struct nfc_mei_phy *phy = mei_cldev_get_drvdata(cldev);
+
+	microread_remove(phy->hdev);
+
+	nfc_mei_phy_free(phy);
+
+	return 0;
+}
+
+static struct mei_cl_device_id microread_mei_tbl[] = {
+	{ MICROREAD_DRIVER_NAME, MEI_NFC_UUID, MEI_CL_VERSION_ANY},
+
+	/* required last entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, microread_mei_tbl);
+
+static struct mei_cl_driver microread_driver = {
+	.id_table = microread_mei_tbl,
+	.name = MICROREAD_DRIVER_NAME,
+
+	.probe = microread_mei_probe,
+	.remove = microread_mei_remove,
+};
+
+module_mei_cl_driver(microread_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.c b/drivers/nfc/microread/microread.c
new file mode 100644
index 000000000..e5d5d2d97
--- /dev/null
+++ b/drivers/nfc/microread/microread.c
@@ -0,0 +1,734 @@
+/*
+ * HCI based Driver for Inside Secure microread NFC Chip
+ *
+ * Copyright (C) 2013  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc-ccitt.h>
+
+#include <linux/nfc.h>
+#include <net/nfc/nfc.h>
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+
+#include "microread.h"
+
+/* Proprietary gates, events, commands and registers */
+/* Admin */
+#define MICROREAD_GATE_ID_ADM NFC_HCI_ADMIN_GATE
+#define MICROREAD_GATE_ID_MGT 0x01
+#define MICROREAD_GATE_ID_OS 0x02
+#define MICROREAD_GATE_ID_TESTRF 0x03
+#define MICROREAD_GATE_ID_LOOPBACK NFC_HCI_LOOPBACK_GATE
+#define MICROREAD_GATE_ID_IDT NFC_HCI_ID_MGMT_GATE
+#define MICROREAD_GATE_ID_LMS NFC_HCI_LINK_MGMT_GATE
+
+/* Reader */
+#define MICROREAD_GATE_ID_MREAD_GEN 0x10
+#define MICROREAD_GATE_ID_MREAD_ISO_B NFC_HCI_RF_READER_B_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T1 0x12
+#define MICROREAD_GATE_ID_MREAD_ISO_A NFC_HCI_RF_READER_A_GATE
+#define MICROREAD_GATE_ID_MREAD_NFC_T3 0x14
+#define MICROREAD_GATE_ID_MREAD_ISO_15_3 0x15
+#define MICROREAD_GATE_ID_MREAD_ISO_15_2 0x16
+#define MICROREAD_GATE_ID_MREAD_ISO_B_3 0x17
+#define MICROREAD_GATE_ID_MREAD_BPRIME 0x18
+#define MICROREAD_GATE_ID_MREAD_ISO_A_3 0x19
+
+/* Card */
+#define MICROREAD_GATE_ID_MCARD_GEN 0x20
+#define MICROREAD_GATE_ID_MCARD_ISO_B 0x21
+#define MICROREAD_GATE_ID_MCARD_BPRIME 0x22
+#define MICROREAD_GATE_ID_MCARD_ISO_A 0x23
+#define MICROREAD_GATE_ID_MCARD_NFC_T3 0x24
+#define MICROREAD_GATE_ID_MCARD_ISO_15_3 0x25
+#define MICROREAD_GATE_ID_MCARD_ISO_15_2 0x26
+#define MICROREAD_GATE_ID_MCARD_ISO_B_2 0x27
+#define MICROREAD_GATE_ID_MCARD_ISO_CUSTOM 0x28
+#define MICROREAD_GATE_ID_SECURE_ELEMENT 0x2F
+
+/* P2P */
+#define MICROREAD_GATE_ID_P2P_GEN 0x30
+#define MICROREAD_GATE_ID_P2P_TARGET 0x31
+#define MICROREAD_PAR_P2P_TARGET_MODE 0x01
+#define MICROREAD_PAR_P2P_TARGET_GT 0x04
+#define MICROREAD_GATE_ID_P2P_INITIATOR 0x32
+#define MICROREAD_PAR_P2P_INITIATOR_GI 0x01
+#define MICROREAD_PAR_P2P_INITIATOR_GT 0x03
+
+/* Those pipes are created/opened by default in the chip */
+#define MICROREAD_PIPE_ID_LMS 0x00
+#define MICROREAD_PIPE_ID_ADMIN 0x01
+#define MICROREAD_PIPE_ID_MGT 0x02
+#define MICROREAD_PIPE_ID_OS 0x03
+#define MICROREAD_PIPE_ID_HDS_LOOPBACK 0x04
+#define MICROREAD_PIPE_ID_HDS_IDT 0x05
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B 0x08
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_BPRIME 0x09
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_A 0x0A
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_3 0x0B
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_15_2 0x0C
+#define MICROREAD_PIPE_ID_HDS_MCARD_NFC_T3 0x0D
+#define MICROREAD_PIPE_ID_HDS_MCARD_ISO_B_2 0x0E
+#define MICROREAD_PIPE_ID_HDS_MCARD_CUSTOM 0x0F
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B 0x10
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1 0x11
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A 0x12
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_3 0x13
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_15_2 0x14
+#define MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3 0x15
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_B_3 0x16
+#define MICROREAD_PIPE_ID_HDS_MREAD_BPRIME 0x17
+#define MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3 0x18
+#define MICROREAD_PIPE_ID_HDS_MREAD_GEN 0x1B
+#define MICROREAD_PIPE_ID_HDS_STACKED_ELEMENT 0x1C
+#define MICROREAD_PIPE_ID_HDS_INSTANCES 0x1D
+#define MICROREAD_PIPE_ID_HDS_TESTRF 0x1E
+#define MICROREAD_PIPE_ID_HDS_P2P_TARGET 0x1F
+#define MICROREAD_PIPE_ID_HDS_P2P_INITIATOR 0x20
+
+/* Events */
+#define MICROREAD_EVT_MREAD_DISCOVERY_OCCURED NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_MREAD_CARD_FOUND 0x3D
+#define MICROREAD_EMCF_A_ATQA 0
+#define MICROREAD_EMCF_A_SAK 2
+#define MICROREAD_EMCF_A_LEN 3
+#define MICROREAD_EMCF_A_UID 4
+#define MICROREAD_EMCF_A3_ATQA 0
+#define MICROREAD_EMCF_A3_SAK 2
+#define MICROREAD_EMCF_A3_LEN 3
+#define MICROREAD_EMCF_A3_UID 4
+#define MICROREAD_EMCF_B_UID 0
+#define MICROREAD_EMCF_T1_ATQA 0
+#define MICROREAD_EMCF_T1_UID 4
+#define MICROREAD_EMCF_T3_UID 0
+#define MICROREAD_EVT_MREAD_DISCOVERY_START NFC_HCI_EVT_READER_REQUESTED
+#define MICROREAD_EVT_MREAD_DISCOVERY_START_SOME 0x3E
+#define MICROREAD_EVT_MREAD_DISCOVERY_STOP NFC_HCI_EVT_END_OPERATION
+#define MICROREAD_EVT_MREAD_SIM_REQUESTS 0x3F
+#define MICROREAD_EVT_MCARD_EXCHANGE NFC_HCI_EVT_TARGET_DISCOVERED
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF 0x20
+#define MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF 0x21
+#define MICROREAD_EVT_MCARD_FIELD_ON 0x11
+#define MICROREAD_EVT_P2P_TARGET_ACTIVATED 0x13
+#define MICROREAD_EVT_P2P_TARGET_DEACTIVATED 0x12
+#define MICROREAD_EVT_MCARD_FIELD_OFF 0x14
+
+/* Commands */
+#define MICROREAD_CMD_MREAD_EXCHANGE 0x10
+#define MICROREAD_CMD_MREAD_SUBSCRIBE 0x3F
+
+/* Hosts IDs */
+#define MICROREAD_ELT_ID_HDS NFC_HCI_TERMINAL_HOST_ID
+#define MICROREAD_ELT_ID_SIM NFC_HCI_UICC_HOST_ID
+#define MICROREAD_ELT_ID_SE1 0x03
+#define MICROREAD_ELT_ID_SE2 0x04
+#define MICROREAD_ELT_ID_SE3 0x05
+
+static struct nfc_hci_gate microread_gates[] = {
+	{MICROREAD_GATE_ID_ADM, MICROREAD_PIPE_ID_ADMIN},
+	{MICROREAD_GATE_ID_LOOPBACK, MICROREAD_PIPE_ID_HDS_LOOPBACK},
+	{MICROREAD_GATE_ID_IDT, MICROREAD_PIPE_ID_HDS_IDT},
+	{MICROREAD_GATE_ID_LMS, MICROREAD_PIPE_ID_LMS},
+	{MICROREAD_GATE_ID_MREAD_ISO_B, MICROREAD_PIPE_ID_HDS_MREAD_ISO_B},
+	{MICROREAD_GATE_ID_MREAD_ISO_A, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A},
+	{MICROREAD_GATE_ID_MREAD_ISO_A_3, MICROREAD_PIPE_ID_HDS_MREAD_ISO_A_3},
+	{MICROREAD_GATE_ID_MGT, MICROREAD_PIPE_ID_MGT},
+	{MICROREAD_GATE_ID_OS, MICROREAD_PIPE_ID_OS},
+	{MICROREAD_GATE_ID_MREAD_NFC_T1, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T1},
+	{MICROREAD_GATE_ID_MREAD_NFC_T3, MICROREAD_PIPE_ID_HDS_MREAD_NFC_T3},
+	{MICROREAD_GATE_ID_P2P_TARGET, MICROREAD_PIPE_ID_HDS_P2P_TARGET},
+	{MICROREAD_GATE_ID_P2P_INITIATOR, MICROREAD_PIPE_ID_HDS_P2P_INITIATOR}
+};
+
+/* Largest headroom needed for outgoing custom commands */
+#define MICROREAD_CMDS_HEADROOM	2
+#define MICROREAD_CMD_TAILROOM	2
+
+struct microread_info {
+	struct nfc_phy_ops *phy_ops;
+	void *phy_id;
+
+	struct nfc_hci_dev *hdev;
+
+	int async_cb_type;
+	data_exchange_cb_t async_cb;
+	void *async_cb_context;
+};
+
+static int microread_open(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->enable(info->phy_id);
+}
+
+static void microread_close(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	info->phy_ops->disable(info->phy_id);
+}
+
+static int microread_hci_ready(struct nfc_hci_dev *hdev)
+{
+	int r;
+	u8 param[4];
+
+	param[0] = 0x03;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 1, NULL);
+	if (r)
+		return r;
+
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_A_3,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+	if (r)
+		return r;
+
+	param[0] = 0x00;
+	param[1] = 0x03;
+	param[2] = 0x00;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_ISO_B,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 3, NULL);
+	if (r)
+		return r;
+
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T1,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, NULL, 0, NULL);
+	if (r)
+		return r;
+
+	param[0] = 0xFF;
+	param[1] = 0xFF;
+	param[2] = 0x00;
+	param[3] = 0x00;
+	r = nfc_hci_send_cmd(hdev, MICROREAD_GATE_ID_MREAD_NFC_T3,
+			     MICROREAD_CMD_MREAD_SUBSCRIBE, param, 4, NULL);
+
+	return r;
+}
+
+static int microread_xmit(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	return info->phy_ops->write(info->phy_id, skb);
+}
+
+static int microread_start_poll(struct nfc_hci_dev *hdev,
+				u32 im_protocols, u32 tm_protocols)
+{
+	int r;
+
+	u8 param[2];
+	u8 mode;
+
+	param[0] = 0x00;
+	param[1] = 0x00;
+
+	if (im_protocols & NFC_PROTO_ISO14443_MASK)
+		param[0] |= (1 << 2);
+
+	if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
+		param[0] |= 1;
+
+	if (im_protocols & NFC_PROTO_MIFARE_MASK)
+		param[1] |= 1;
+
+	if (im_protocols & NFC_PROTO_JEWEL_MASK)
+		param[0] |= (1 << 1);
+
+	if (im_protocols & NFC_PROTO_FELICA_MASK)
+		param[0] |= (1 << 5);
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK)
+		param[1] |= (1 << 1);
+
+	if ((im_protocols | tm_protocols) & NFC_PROTO_NFC_DEP_MASK) {
+		hdev->gb = nfc_get_local_general_bytes(hdev->ndev,
+						       &hdev->gb_len);
+		if (hdev->gb == NULL || hdev->gb_len == 0) {
+			im_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+			tm_protocols &= ~NFC_PROTO_NFC_DEP_MASK;
+		}
+	}
+
+	r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+			       MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+	if (r)
+		return r;
+
+	mode = 0xff;
+	r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+			      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+	if (r)
+		return r;
+
+	if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+				      MICROREAD_PAR_P2P_INITIATOR_GI,
+				      hdev->gb, hdev->gb_len);
+		if (r)
+			return r;
+	}
+
+	if (tm_protocols & NFC_PROTO_NFC_DEP_MASK) {
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_GT,
+				      hdev->gb, hdev->gb_len);
+		if (r)
+			return r;
+
+		mode = 0x02;
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+		if (r)
+			return r;
+	}
+
+	return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_MREAD_ISO_A,
+				  MICROREAD_EVT_MREAD_DISCOVERY_START_SOME,
+				  param, 2);
+}
+
+static int microread_dep_link_up(struct nfc_hci_dev *hdev,
+				struct nfc_target *target, u8 comm_mode,
+				u8 *gb, size_t gb_len)
+{
+	struct sk_buff *rgb_skb = NULL;
+	int r;
+
+	r = nfc_hci_get_param(hdev, target->hci_reader_gate,
+			      MICROREAD_PAR_P2P_INITIATOR_GT, &rgb_skb);
+	if (r < 0)
+		return r;
+
+	if (rgb_skb->len == 0 || rgb_skb->len > NFC_GB_MAXSIZE) {
+		r = -EPROTO;
+		goto exit;
+	}
+
+	r = nfc_set_remote_general_bytes(hdev->ndev, rgb_skb->data,
+					 rgb_skb->len);
+	if (r == 0)
+		r = nfc_dep_link_is_up(hdev->ndev, target->idx, comm_mode,
+				       NFC_RF_INITIATOR);
+exit:
+	kfree_skb(rgb_skb);
+
+	return r;
+}
+
+static int microread_dep_link_down(struct nfc_hci_dev *hdev)
+{
+	return nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_INITIATOR,
+				  MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL, 0);
+}
+
+static int microread_target_from_gate(struct nfc_hci_dev *hdev, u8 gate,
+				      struct nfc_target *target)
+{
+	switch (gate) {
+	case MICROREAD_GATE_ID_P2P_INITIATOR:
+		target->supported_protocols = NFC_PROTO_NFC_DEP_MASK;
+		break;
+	default:
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+static int microread_complete_target_discovered(struct nfc_hci_dev *hdev,
+						u8 gate,
+						struct nfc_target *target)
+{
+	return 0;
+}
+
+#define MICROREAD_CB_TYPE_READER_ALL 1
+
+static void microread_im_transceive_cb(void *context, struct sk_buff *skb,
+				       int err)
+{
+	struct microread_info *info = context;
+
+	switch (info->async_cb_type) {
+	case MICROREAD_CB_TYPE_READER_ALL:
+		if (err == 0) {
+			if (skb->len == 0) {
+				err = -EPROTO;
+				kfree_skb(skb);
+				info->async_cb(info->async_cb_context, NULL,
+					       -EPROTO);
+				return;
+			}
+
+			if (skb->data[skb->len - 1] != 0) {
+				err = nfc_hci_result_to_errno(
+						       skb->data[skb->len - 1]);
+				kfree_skb(skb);
+				info->async_cb(info->async_cb_context, NULL,
+					       err);
+				return;
+			}
+
+			skb_trim(skb, skb->len - 1);	/* RF Error ind. */
+		}
+		info->async_cb(info->async_cb_context, skb, err);
+		break;
+	default:
+		if (err == 0)
+			kfree_skb(skb);
+		break;
+	}
+}
+
+/*
+ * Returns:
+ * <= 0: driver handled the data exchange
+ *    1: driver doesn't especially handle, please do standard processing
+ */
+static int microread_im_transceive(struct nfc_hci_dev *hdev,
+				   struct nfc_target *target,
+				   struct sk_buff *skb, data_exchange_cb_t cb,
+				   void *cb_context)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+	u8 control_bits;
+	u16 crc;
+
+	pr_info("data exchange to gate 0x%x\n", target->hci_reader_gate);
+
+	if (target->hci_reader_gate == MICROREAD_GATE_ID_P2P_INITIATOR) {
+		*(u8 *)skb_push(skb, 1) = 0;
+
+		return nfc_hci_send_event(hdev, target->hci_reader_gate,
+				     MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_TO_RF,
+				     skb->data, skb->len);
+	}
+
+	switch (target->hci_reader_gate) {
+	case MICROREAD_GATE_ID_MREAD_ISO_A:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_B:
+		control_bits = 0xCB;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T1:
+		control_bits = 0x1B;
+
+		crc = crc_ccitt(0xffff, skb->data, skb->len);
+		crc = ~crc;
+		skb_put_u8(skb, crc & 0xff);
+		skb_put_u8(skb, crc >> 8);
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T3:
+		control_bits = 0xDB;
+		break;
+	default:
+		pr_info("Abort im_transceive to invalid gate 0x%x\n",
+			target->hci_reader_gate);
+		return 1;
+	}
+
+	*(u8 *)skb_push(skb, 1) = control_bits;
+
+	info->async_cb_type = MICROREAD_CB_TYPE_READER_ALL;
+	info->async_cb = cb;
+	info->async_cb_context = cb_context;
+
+	return nfc_hci_send_cmd_async(hdev, target->hci_reader_gate,
+				      MICROREAD_CMD_MREAD_EXCHANGE,
+				      skb->data, skb->len,
+				      microread_im_transceive_cb, info);
+}
+
+static int microread_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb)
+{
+	int r;
+
+	r = nfc_hci_send_event(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+			       MICROREAD_EVT_MCARD_EXCHANGE,
+			       skb->data, skb->len);
+
+	kfree_skb(skb);
+
+	return r;
+}
+
+static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
+					struct sk_buff *skb)
+{
+	struct nfc_target *targets;
+	int r = 0;
+
+	pr_info("target discovered to gate 0x%x\n", gate);
+
+	targets = kzalloc(sizeof(struct nfc_target), GFP_KERNEL);
+	if (targets == NULL) {
+		r = -ENOMEM;
+		goto exit;
+	}
+
+	targets->hci_reader_gate = gate;
+
+	switch (gate) {
+	case MICROREAD_GATE_ID_MREAD_ISO_A:
+		targets->supported_protocols =
+		      nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A_SAK]);
+		targets->sens_res =
+			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
+		targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
+		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+		       targets->nfcid1_len);
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_A_3:
+		targets->supported_protocols =
+		      nfc_hci_sak_to_protocol(skb->data[MICROREAD_EMCF_A3_SAK]);
+		targets->sens_res =
+			 be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
+		targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
+		targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+		if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+			r = -EINVAL;
+			goto exit_free;
+		}
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+		       targets->nfcid1_len);
+		break;
+	case MICROREAD_GATE_ID_MREAD_ISO_B:
+		targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_B_UID], 4);
+		targets->nfcid1_len = 4;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T1:
+		targets->supported_protocols = NFC_PROTO_JEWEL_MASK;
+		targets->sens_res =
+			le16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_T1_ATQA]);
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T1_UID], 4);
+		targets->nfcid1_len = 4;
+		break;
+	case MICROREAD_GATE_ID_MREAD_NFC_T3:
+		targets->supported_protocols = NFC_PROTO_FELICA_MASK;
+		memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_T3_UID], 8);
+		targets->nfcid1_len = 8;
+		break;
+	default:
+		pr_info("discard target discovered to gate 0x%x\n", gate);
+		goto exit_free;
+	}
+
+	r = nfc_targets_found(hdev->ndev, targets, 1);
+
+exit_free:
+	kfree(targets);
+
+exit:
+	kfree_skb(skb);
+
+	if (r)
+		pr_err("Failed to handle discovered target err=%d\n", r);
+}
+
+static int microread_event_received(struct nfc_hci_dev *hdev, u8 pipe,
+				     u8 event, struct sk_buff *skb)
+{
+	int r;
+	u8 gate = hdev->pipes[pipe].gate;
+	u8 mode;
+
+	pr_info("Microread received event 0x%x to gate 0x%x\n", event, gate);
+
+	switch (event) {
+	case MICROREAD_EVT_MREAD_CARD_FOUND:
+		microread_target_discovered(hdev, gate, skb);
+		return 0;
+
+	case MICROREAD_EVT_P2P_INITIATOR_EXCHANGE_FROM_RF:
+		if (skb->len < 1) {
+			kfree_skb(skb);
+			return -EPROTO;
+		}
+
+		if (skb->data[skb->len - 1]) {
+			kfree_skb(skb);
+			return -EIO;
+		}
+
+		skb_trim(skb, skb->len - 1);
+
+		r = nfc_tm_data_received(hdev->ndev, skb);
+		break;
+
+	case MICROREAD_EVT_MCARD_FIELD_ON:
+	case MICROREAD_EVT_MCARD_FIELD_OFF:
+		kfree_skb(skb);
+		return 0;
+
+	case MICROREAD_EVT_P2P_TARGET_ACTIVATED:
+		r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK,
+				     NFC_COMM_PASSIVE, skb->data,
+				     skb->len);
+
+		kfree_skb(skb);
+		break;
+
+	case MICROREAD_EVT_MCARD_EXCHANGE:
+		if (skb->len < 1) {
+			kfree_skb(skb);
+			return -EPROTO;
+		}
+
+		if (skb->data[skb->len-1]) {
+			kfree_skb(skb);
+			return -EIO;
+		}
+
+		skb_trim(skb, skb->len - 1);
+
+		r = nfc_tm_data_received(hdev->ndev, skb);
+		break;
+
+	case MICROREAD_EVT_P2P_TARGET_DEACTIVATED:
+		kfree_skb(skb);
+
+		mode = 0xff;
+		r = nfc_hci_set_param(hdev, MICROREAD_GATE_ID_P2P_TARGET,
+				      MICROREAD_PAR_P2P_TARGET_MODE, &mode, 1);
+		if (r)
+			break;
+
+		r = nfc_hci_send_event(hdev, gate,
+				       MICROREAD_EVT_MREAD_DISCOVERY_STOP, NULL,
+				       0);
+		break;
+
+	default:
+		return 1;
+	}
+
+	return r;
+}
+
+static struct nfc_hci_ops microread_hci_ops = {
+	.open = microread_open,
+	.close = microread_close,
+	.hci_ready = microread_hci_ready,
+	.xmit = microread_xmit,
+	.start_poll = microread_start_poll,
+	.dep_link_up = microread_dep_link_up,
+	.dep_link_down = microread_dep_link_down,
+	.target_from_gate = microread_target_from_gate,
+	.complete_target_discovered = microread_complete_target_discovered,
+	.im_transceive = microread_im_transceive,
+	.tm_send = microread_tm_send,
+	.check_presence = NULL,
+	.event_received = microread_event_received,
+};
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    struct nfc_hci_dev **hdev)
+{
+	struct microread_info *info;
+	unsigned long quirks = 0;
+	u32 protocols;
+	struct nfc_hci_init_data init_data;
+	int r;
+
+	info = kzalloc(sizeof(struct microread_info), GFP_KERNEL);
+	if (!info) {
+		r = -ENOMEM;
+		goto err_info_alloc;
+	}
+
+	info->phy_ops = phy_ops;
+	info->phy_id = phy_id;
+
+	init_data.gate_count = ARRAY_SIZE(microread_gates);
+	memcpy(init_data.gates, microread_gates, sizeof(microread_gates));
+
+	strcpy(init_data.session_id, "MICROREA");
+
+	set_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &quirks);
+
+	protocols = NFC_PROTO_JEWEL_MASK |
+		    NFC_PROTO_MIFARE_MASK |
+		    NFC_PROTO_FELICA_MASK |
+		    NFC_PROTO_ISO14443_MASK |
+		    NFC_PROTO_ISO14443_B_MASK |
+		    NFC_PROTO_NFC_DEP_MASK;
+
+	info->hdev = nfc_hci_allocate_device(&microread_hci_ops, &init_data,
+					     quirks, protocols, llc_name,
+					     phy_headroom +
+					     MICROREAD_CMDS_HEADROOM,
+					     phy_tailroom +
+					     MICROREAD_CMD_TAILROOM,
+					     phy_payload);
+	if (!info->hdev) {
+		pr_err("Cannot allocate nfc hdev\n");
+		r = -ENOMEM;
+		goto err_alloc_hdev;
+	}
+
+	nfc_hci_set_clientdata(info->hdev, info);
+
+	r = nfc_hci_register_device(info->hdev);
+	if (r)
+		goto err_regdev;
+
+	*hdev = info->hdev;
+
+	return 0;
+
+err_regdev:
+	nfc_hci_free_device(info->hdev);
+
+err_alloc_hdev:
+	kfree(info);
+
+err_info_alloc:
+	return r;
+}
+EXPORT_SYMBOL(microread_probe);
+
+void microread_remove(struct nfc_hci_dev *hdev)
+{
+	struct microread_info *info = nfc_hci_get_clientdata(hdev);
+
+	nfc_hci_unregister_device(hdev);
+	nfc_hci_free_device(hdev);
+	kfree(info);
+}
+EXPORT_SYMBOL(microread_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/nfc/microread/microread.h b/drivers/nfc/microread/microread.h
new file mode 100644
index 000000000..f53864143
--- /dev/null
+++ b/drivers/nfc/microread/microread.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2011 - 2012  Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LOCAL_MICROREAD_H_
+#define __LOCAL_MICROREAD_H_
+
+#include <net/nfc/hci.h>
+
+#define DRIVER_DESC "NFC driver for microread"
+
+int microread_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name,
+		    int phy_headroom, int phy_tailroom, int phy_payload,
+		    struct nfc_hci_dev **hdev);
+
+void microread_remove(struct nfc_hci_dev *hdev);
+
+#endif /* __LOCAL_MICROREAD_H_ */