Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 909 insertions, 0 deletions

diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
new file mode 100644
index 000000000..20b9864ad
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c
@@ -0,0 +1,909 @@
+/*
+ * Copyright (C) 2014-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file contains the Broadcom Iproc GPIO driver that supports 3
+ * GPIO controllers on Iproc including the ASIU GPIO controller, the
+ * chipCommonG GPIO controller, and the always-on GPIO controller. Basic
+ * PINCONF such as bias pull up/down, and drive strength are also supported
+ * in this driver.
+ *
+ * It provides the functionality where pins from the GPIO can be
+ * individually muxed to GPIO function, if individual pad
+ * configuration is supported, through the interaction with respective
+ * SoCs IOMUX controller.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/driver.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "../pinctrl-utils.h"
+
+#define IPROC_GPIO_DATA_IN_OFFSET   0x00
+#define IPROC_GPIO_DATA_OUT_OFFSET  0x04
+#define IPROC_GPIO_OUT_EN_OFFSET    0x08
+#define IPROC_GPIO_INT_TYPE_OFFSET  0x0c
+#define IPROC_GPIO_INT_DE_OFFSET    0x10
+#define IPROC_GPIO_INT_EDGE_OFFSET  0x14
+#define IPROC_GPIO_INT_MSK_OFFSET   0x18
+#define IPROC_GPIO_INT_STAT_OFFSET  0x1c
+#define IPROC_GPIO_INT_MSTAT_OFFSET 0x20
+#define IPROC_GPIO_INT_CLR_OFFSET   0x24
+#define IPROC_GPIO_PAD_RES_OFFSET   0x34
+#define IPROC_GPIO_RES_EN_OFFSET    0x38
+
+/* drive strength control for ASIU GPIO */
+#define IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET 0x58
+
+/* pinconf for CCM GPIO */
+#define IPROC_GPIO_PULL_DN_OFFSET   0x10
+#define IPROC_GPIO_PULL_UP_OFFSET   0x14
+
+/* pinconf for CRMU(aon) GPIO and CCM GPIO*/
+#define IPROC_GPIO_DRV_CTRL_OFFSET  0x00
+
+#define GPIO_BANK_SIZE 0x200
+#define NGPIOS_PER_BANK 32
+#define GPIO_BANK(pin) ((pin) / NGPIOS_PER_BANK)
+
+#define IPROC_GPIO_REG(pin, reg) (GPIO_BANK(pin) * GPIO_BANK_SIZE + (reg))
+#define IPROC_GPIO_SHIFT(pin) ((pin) % NGPIOS_PER_BANK)
+
+#define GPIO_DRV_STRENGTH_BIT_SHIFT  20
+#define GPIO_DRV_STRENGTH_BITS       3
+#define GPIO_DRV_STRENGTH_BIT_MASK   ((1 << GPIO_DRV_STRENGTH_BITS) - 1)
+
+enum iproc_pinconf_param {
+	IPROC_PINCONF_DRIVE_STRENGTH = 0,
+	IPROC_PINCONF_BIAS_DISABLE,
+	IPROC_PINCONF_BIAS_PULL_UP,
+	IPROC_PINCONF_BIAS_PULL_DOWN,
+	IPROC_PINCON_MAX,
+};
+
+enum iproc_pinconf_ctrl_type {
+	IOCTRL_TYPE_AON = 1,
+	IOCTRL_TYPE_CDRU,
+	IOCTRL_TYPE_INVALID,
+};
+
+/*
+ * Iproc GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for Iproc GPIO controller
+ * @io_ctrl: I/O register base for certain type of Iproc GPIO controller that
+ * has the PINCONF support implemented outside of the GPIO block
+ * @lock: lock to protect access to I/O registers
+ * @gc: GPIO chip
+ * @num_banks: number of GPIO banks, each bank supports up to 32 GPIOs
+ * @pinmux_is_supported: flag to indicate this GPIO controller contains pins
+ * that can be individually muxed to GPIO
+ * @pinconf_disable: contains a list of PINCONF parameters that need to be
+ * disabled
+ * @nr_pinconf_disable: total number of PINCONF parameters that need to be
+ * disabled
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ */
+struct iproc_gpio {
+	struct device *dev;
+
+	void __iomem *base;
+	void __iomem *io_ctrl;
+	enum iproc_pinconf_ctrl_type io_ctrl_type;
+
+	raw_spinlock_t lock;
+
+	struct gpio_chip gc;
+	unsigned num_banks;
+
+	bool pinmux_is_supported;
+
+	enum pin_config_param *pinconf_disable;
+	unsigned int nr_pinconf_disable;
+
+	struct pinctrl_dev *pctl;
+	struct pinctrl_desc pctldesc;
+};
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned iproc_pin_to_gpio(unsigned pin)
+{
+	return pin;
+}
+
+/**
+ *  iproc_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  Iproc GPIO register
+ *
+ *  @iproc_gpio: Iproc GPIO device
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void iproc_set_bit(struct iproc_gpio *chip, unsigned int reg,
+				  unsigned gpio, bool set)
+{
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+	u32 val;
+
+	val = readl(chip->base + offset);
+	if (set)
+		val |= BIT(shift);
+	else
+		val &= ~BIT(shift);
+	writel(val, chip->base + offset);
+}
+
+static inline bool iproc_get_bit(struct iproc_gpio *chip, unsigned int reg,
+				  unsigned gpio)
+{
+	unsigned int offset = IPROC_GPIO_REG(gpio, reg);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+
+	return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+static void iproc_gpio_irq_handler(struct irq_desc *desc)
+{
+	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+	int i, bit;
+
+	chained_irq_enter(irq_chip, desc);
+
+	/* go through the entire GPIO banks and handle all interrupts */
+	for (i = 0; i < chip->num_banks; i++) {
+		unsigned long val = readl(chip->base + (i * GPIO_BANK_SIZE) +
+					  IPROC_GPIO_INT_MSTAT_OFFSET);
+
+		for_each_set_bit(bit, &val, NGPIOS_PER_BANK) {
+			unsigned pin = NGPIOS_PER_BANK * i + bit;
+			int child_irq = irq_find_mapping(gc->irq.domain, pin);
+
+			/*
+			 * Clear the interrupt before invoking the
+			 * handler, so we do not leave any window
+			 */
+			writel(BIT(bit), chip->base + (i * GPIO_BANK_SIZE) +
+			       IPROC_GPIO_INT_CLR_OFFSET);
+
+			generic_handle_irq(child_irq);
+		}
+	}
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+
+static void iproc_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+			IPROC_GPIO_INT_CLR_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+	u32 val = BIT(shift);
+
+	writel(val, chip->base + offset);
+}
+
+/**
+ *  iproc_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void iproc_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+
+	iproc_set_bit(chip, IPROC_GPIO_INT_MSK_OFFSET, gpio, unmask);
+}
+
+static void iproc_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_gpio_irq_set_mask(d, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void iproc_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_gpio_irq_set_mask(d, true);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int iproc_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	bool level_triggered = false;
+	bool dual_edge = false;
+	bool rising_or_high = false;
+	unsigned long flags;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		rising_or_high = true;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		dual_edge = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		level_triggered = true;
+		rising_or_high = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		level_triggered = true;
+		break;
+
+	default:
+		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+			type);
+		return -EINVAL;
+	}
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_INT_TYPE_OFFSET, gpio,
+		       level_triggered);
+	iproc_set_bit(chip, IPROC_GPIO_INT_DE_OFFSET, gpio, dual_edge);
+	iproc_set_bit(chip, IPROC_GPIO_INT_EDGE_OFFSET, gpio,
+		       rising_or_high);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev,
+		"gpio:%u level_triggered:%d dual_edge:%d rising_or_high:%d\n",
+		gpio, level_triggered, dual_edge, rising_or_high);
+
+	return 0;
+}
+
+static struct irq_chip iproc_gpio_irq_chip = {
+	.name = "bcm-iproc-gpio",
+	.irq_ack = iproc_gpio_irq_ack,
+	.irq_mask = iproc_gpio_irq_mask,
+	.irq_unmask = iproc_gpio_irq_unmask,
+	.irq_set_type = iproc_gpio_irq_set_type,
+};
+
+/*
+ * Request the Iproc IOMUX pinmux controller to mux individual pins to GPIO
+ */
+static int iproc_gpio_request(struct gpio_chip *gc, unsigned offset)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = gc->base + offset;
+
+	/* not all Iproc GPIO pins can be muxed individually */
+	if (!chip->pinmux_is_supported)
+		return 0;
+
+	return pinctrl_gpio_request(gpio);
+}
+
+static void iproc_gpio_free(struct gpio_chip *gc, unsigned offset)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = gc->base + offset;
+
+	if (!chip->pinmux_is_supported)
+		return;
+
+	pinctrl_gpio_free(gpio);
+}
+
+static int iproc_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+
+	return 0;
+}
+
+static int iproc_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+					int val)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_OUT_EN_OFFSET, gpio, true);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+
+	return 0;
+}
+
+static void iproc_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	iproc_set_bit(chip, IPROC_GPIO_DATA_OUT_OFFSET, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int iproc_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct iproc_gpio *chip = gpiochip_get_data(gc);
+	unsigned int offset = IPROC_GPIO_REG(gpio,
+					      IPROC_GPIO_DATA_IN_OFFSET);
+	unsigned int shift = IPROC_GPIO_SHIFT(gpio);
+
+	return !!(readl(chip->base + offset) & BIT(shift));
+}
+
+/*
+ * Mapping of the iProc PINCONF parameters to the generic pin configuration
+ * parameters
+ */
+static const enum pin_config_param iproc_pinconf_disable_map[] = {
+	[IPROC_PINCONF_DRIVE_STRENGTH] = PIN_CONFIG_DRIVE_STRENGTH,
+	[IPROC_PINCONF_BIAS_DISABLE] = PIN_CONFIG_BIAS_DISABLE,
+	[IPROC_PINCONF_BIAS_PULL_UP] = PIN_CONFIG_BIAS_PULL_UP,
+	[IPROC_PINCONF_BIAS_PULL_DOWN] = PIN_CONFIG_BIAS_PULL_DOWN,
+};
+
+static bool iproc_pinconf_param_is_disabled(struct iproc_gpio *chip,
+					    enum pin_config_param param)
+{
+	unsigned int i;
+
+	if (!chip->nr_pinconf_disable)
+		return false;
+
+	for (i = 0; i < chip->nr_pinconf_disable; i++)
+		if (chip->pinconf_disable[i] == param)
+			return true;
+
+	return false;
+}
+
+static int iproc_pinconf_disable_map_create(struct iproc_gpio *chip,
+					    unsigned long disable_mask)
+{
+	unsigned int map_size = ARRAY_SIZE(iproc_pinconf_disable_map);
+	unsigned int bit, nbits = 0;
+
+	/* figure out total number of PINCONF parameters to disable */
+	for_each_set_bit(bit, &disable_mask, map_size)
+		nbits++;
+
+	if (!nbits)
+		return 0;
+
+	/*
+	 * Allocate an array to store PINCONF parameters that need to be
+	 * disabled
+	 */
+	chip->pinconf_disable = devm_kcalloc(chip->dev, nbits,
+					     sizeof(*chip->pinconf_disable),
+					     GFP_KERNEL);
+	if (!chip->pinconf_disable)
+		return -ENOMEM;
+
+	chip->nr_pinconf_disable = nbits;
+
+	/* now store these parameters */
+	nbits = 0;
+	for_each_set_bit(bit, &disable_mask, map_size)
+		chip->pinconf_disable[nbits++] = iproc_pinconf_disable_map[bit];
+
+	return 0;
+}
+
+static int iproc_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *iproc_get_group_name(struct pinctrl_dev *pctldev,
+					 unsigned selector)
+{
+	return "gpio_grp";
+}
+
+static const struct pinctrl_ops iproc_pctrl_ops = {
+	.get_groups_count = iproc_get_groups_count,
+	.get_group_name = iproc_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int iproc_gpio_set_pull(struct iproc_gpio *chip, unsigned gpio,
+				bool disable, bool pull_up)
+{
+	void __iomem *base;
+	unsigned long flags;
+	unsigned int shift;
+	u32 val_1, val_2;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+		base = chip->io_ctrl;
+		shift = IPROC_GPIO_SHIFT(gpio);
+
+		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET);
+		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET);
+		if (disable) {
+			/* no pull-up or pull-down */
+			val_1 &= ~BIT(shift);
+			val_2 &= ~BIT(shift);
+		} else if (pull_up) {
+			val_1 |= BIT(shift);
+			val_2 &= ~BIT(shift);
+		} else {
+			val_1 &= ~BIT(shift);
+			val_2 |= BIT(shift);
+		}
+		writel(val_1, base + IPROC_GPIO_PULL_UP_OFFSET);
+		writel(val_2, base + IPROC_GPIO_PULL_DN_OFFSET);
+	} else {
+		if (disable) {
+			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+				      false);
+		} else {
+			iproc_set_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio,
+				      pull_up);
+			iproc_set_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio,
+				      true);
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+	dev_dbg(chip->dev, "gpio:%u set pullup:%d\n", gpio, pull_up);
+
+	return 0;
+}
+
+static void iproc_gpio_get_pull(struct iproc_gpio *chip, unsigned gpio,
+				 bool *disable, bool *pull_up)
+{
+	void __iomem *base;
+	unsigned long flags;
+	unsigned int shift;
+	u32 val_1, val_2;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	if (chip->io_ctrl_type == IOCTRL_TYPE_CDRU) {
+		base = chip->io_ctrl;
+		shift = IPROC_GPIO_SHIFT(gpio);
+
+		val_1 = readl(base + IPROC_GPIO_PULL_UP_OFFSET) & BIT(shift);
+		val_2 = readl(base + IPROC_GPIO_PULL_DN_OFFSET) & BIT(shift);
+
+		*pull_up = val_1 ? true : false;
+		*disable = (val_1 | val_2) ? false : true;
+
+	} else {
+		*disable = !iproc_get_bit(chip, IPROC_GPIO_RES_EN_OFFSET, gpio);
+		*pull_up = iproc_get_bit(chip, IPROC_GPIO_PAD_RES_OFFSET, gpio);
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+#define DRV_STRENGTH_OFFSET(gpio, bit, type)  ((type) == IOCTRL_TYPE_AON ? \
+	((2 - (bit)) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+	((type) == IOCTRL_TYPE_CDRU) ? \
+	((bit) * 4 + IPROC_GPIO_DRV_CTRL_OFFSET) : \
+	((bit) * 4 + IPROC_GPIO_REG(gpio, IPROC_GPIO_ASIU_DRV0_CTRL_OFFSET)))
+
+static int iproc_gpio_set_strength(struct iproc_gpio *chip, unsigned gpio,
+				    unsigned strength)
+{
+	void __iomem *base;
+	unsigned int i, offset, shift;
+	u32 val;
+	unsigned long flags;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 ||  strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	if (chip->io_ctrl) {
+		base = chip->io_ctrl;
+	} else {
+		base = chip->base;
+	}
+
+	shift = IPROC_GPIO_SHIFT(gpio);
+
+	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+		strength);
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	strength = (strength / 2) - 1;
+	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
+		val = readl(base + offset);
+		val &= ~BIT(shift);
+		val |= ((strength >> i) & 0x1) << shift;
+		writel(val, base + offset);
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int iproc_gpio_get_strength(struct iproc_gpio *chip, unsigned gpio,
+				    u16 *strength)
+{
+	void __iomem *base;
+	unsigned int i, offset, shift;
+	u32 val;
+	unsigned long flags;
+
+	if (chip->io_ctrl) {
+		base = chip->io_ctrl;
+	} else {
+		base = chip->base;
+	}
+
+	shift = IPROC_GPIO_SHIFT(gpio);
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*strength = 0;
+	for (i = 0; i < GPIO_DRV_STRENGTH_BITS; i++) {
+		offset = DRV_STRENGTH_OFFSET(gpio, i, chip->io_ctrl_type);
+		val = readl(base + offset) & BIT(shift);
+		val >>= shift;
+		*strength += (val << i);
+	}
+
+	/* convert to mA */
+	*strength = (*strength + 1) * 2;
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int iproc_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+				 unsigned long *config)
+{
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned gpio = iproc_pin_to_gpio(pin);
+	u16 arg;
+	bool disable, pull_up;
+	int ret;
+
+	if (iproc_pinconf_param_is_disabled(chip, param))
+		return -ENOTSUPP;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (disable)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (!disable && pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		iproc_gpio_get_pull(chip, gpio, &disable, &pull_up);
+		if (!disable && !pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = iproc_gpio_get_strength(chip, gpio, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+
+		return 0;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	return -ENOTSUPP;
+}
+
+static int iproc_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+				 unsigned long *configs, unsigned num_configs)
+{
+	struct iproc_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 arg;
+	unsigned i, gpio = iproc_pin_to_gpio(pin);
+	int ret = -ENOTSUPP;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+
+		if (iproc_pinconf_param_is_disabled(chip, param))
+			return -ENOTSUPP;
+
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = iproc_gpio_set_pull(chip, gpio, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = iproc_gpio_set_pull(chip, gpio, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = iproc_gpio_set_pull(chip, gpio, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = iproc_gpio_set_strength(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(chip->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	} /* for each config */
+
+out:
+	return ret;
+}
+
+static const struct pinconf_ops iproc_pconf_ops = {
+	.is_generic = true,
+	.pin_config_get = iproc_pin_config_get,
+	.pin_config_set = iproc_pin_config_set,
+};
+
+/*
+ * Iproc GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, and drive strength, when the pin is configured to GPIO
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int iproc_gpio_register_pinconf(struct iproc_gpio *chip)
+{
+	struct pinctrl_desc *pctldesc = &chip->pctldesc;
+	struct pinctrl_pin_desc *pins;
+	struct gpio_chip *gc = &chip->gc;
+	int i;
+
+	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	for (i = 0; i < gc->ngpio; i++) {
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+					      "gpio-%d", i);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+
+	pctldesc->name = dev_name(chip->dev);
+	pctldesc->pctlops = &iproc_pctrl_ops;
+	pctldesc->pins = pins;
+	pctldesc->npins = gc->ngpio;
+	pctldesc->confops = &iproc_pconf_ops;
+
+	chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
+	if (IS_ERR(chip->pctl)) {
+		dev_err(chip->dev, "unable to register pinctrl device\n");
+		return PTR_ERR(chip->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id iproc_gpio_of_match[] = {
+	{ .compatible = "brcm,iproc-gpio" },
+	{ .compatible = "brcm,cygnus-ccm-gpio" },
+	{ .compatible = "brcm,cygnus-asiu-gpio" },
+	{ .compatible = "brcm,cygnus-crmu-gpio" },
+	{ .compatible = "brcm,iproc-nsp-gpio" },
+	{ .compatible = "brcm,iproc-stingray-gpio" },
+	{ /* sentinel */ }
+};
+
+static int iproc_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct iproc_gpio *chip;
+	struct gpio_chip *gc;
+	u32 ngpios, pinconf_disable_mask = 0;
+	int irq, ret;
+	bool no_pinconf = false;
+	enum iproc_pinconf_ctrl_type io_ctrl_type = IOCTRL_TYPE_INVALID;
+
+	/* NSP does not support drive strength config */
+	if (of_device_is_compatible(dev->of_node, "brcm,iproc-nsp-gpio"))
+		pinconf_disable_mask = BIT(IPROC_PINCONF_DRIVE_STRENGTH);
+	/* Stingray does not support pinconf in this controller */
+	else if (of_device_is_compatible(dev->of_node,
+					 "brcm,iproc-stingray-gpio"))
+		no_pinconf = true;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	chip->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		chip->io_ctrl = devm_ioremap_resource(dev, res);
+		if (IS_ERR(chip->io_ctrl)) {
+			dev_err(dev, "unable to map I/O memory\n");
+			return PTR_ERR(chip->io_ctrl);
+		}
+		if (of_device_is_compatible(dev->of_node,
+					    "brcm,cygnus-ccm-gpio"))
+			io_ctrl_type = IOCTRL_TYPE_CDRU;
+		else
+			io_ctrl_type = IOCTRL_TYPE_AON;
+	}
+
+	chip->io_ctrl_type = io_ctrl_type;
+
+	if (of_property_read_u32(dev->of_node, "ngpios", &ngpios)) {
+		dev_err(&pdev->dev, "missing ngpios DT property\n");
+		return -ENODEV;
+	}
+
+	raw_spin_lock_init(&chip->lock);
+
+	gc = &chip->gc;
+	gc->base = -1;
+	gc->ngpio = ngpios;
+	chip->num_banks = (ngpios + NGPIOS_PER_BANK - 1) / NGPIOS_PER_BANK;
+	gc->label = dev_name(dev);
+	gc->parent = dev;
+	gc->of_node = dev->of_node;
+	gc->request = iproc_gpio_request;
+	gc->free = iproc_gpio_free;
+	gc->direction_input = iproc_gpio_direction_input;
+	gc->direction_output = iproc_gpio_direction_output;
+	gc->set = iproc_gpio_set;
+	gc->get = iproc_gpio_get;
+
+	chip->pinmux_is_supported = of_property_read_bool(dev->of_node,
+							"gpio-ranges");
+
+	ret = gpiochip_add_data(gc, chip);
+	if (ret < 0) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	if (!no_pinconf) {
+		ret = iproc_gpio_register_pinconf(chip);
+		if (ret) {
+			dev_err(dev, "unable to register pinconf\n");
+			goto err_rm_gpiochip;
+		}
+
+		if (pinconf_disable_mask) {
+			ret = iproc_pinconf_disable_map_create(chip,
+							 pinconf_disable_mask);
+			if (ret) {
+				dev_err(dev,
+					"unable to create pinconf disable map\n");
+				goto err_rm_gpiochip;
+			}
+		}
+	}
+
+	/* optional GPIO interrupt support */
+	irq = platform_get_irq(pdev, 0);
+	if (irq) {
+		ret = gpiochip_irqchip_add(gc, &iproc_gpio_irq_chip, 0,
+					   handle_simple_irq, IRQ_TYPE_NONE);
+		if (ret) {
+			dev_err(dev, "no GPIO irqchip\n");
+			goto err_rm_gpiochip;
+		}
+
+		gpiochip_set_chained_irqchip(gc, &iproc_gpio_irq_chip, irq,
+					     iproc_gpio_irq_handler);
+	}
+
+	return 0;
+
+err_rm_gpiochip:
+	gpiochip_remove(gc);
+
+	return ret;
+}
+
+static struct platform_driver iproc_gpio_driver = {
+	.driver = {
+		.name = "iproc-gpio",
+		.of_match_table = iproc_gpio_of_match,
+	},
+	.probe = iproc_gpio_probe,
+};
+
+static int __init iproc_gpio_init(void)
+{
+	return platform_driver_register(&iproc_gpio_driver);
+}
+arch_initcall_sync(iproc_gpio_init);