Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 185 insertions, 0 deletions

diff --git a/samples/bpf/test_cgrp2_tc.sh b/samples/bpf/test_cgrp2_tc.sh
new file mode 100755
index 000000000..12faf5847
--- /dev/null
+++ b/samples/bpf/test_cgrp2_tc.sh
@@ -0,0 +1,185 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+MY_DIR=$(dirname $0)
+# Details on the bpf prog
+BPF_CGRP2_ARRAY_NAME='test_cgrp2_array_pin'
+BPF_PROG="$MY_DIR/test_cgrp2_tc_kern.o"
+BPF_SECTION='filter'
+
+[ -z "$TC" ] && TC='tc'
+[ -z "$IP" ] && IP='ip'
+
+# Names of the veth interface, net namespace...etc.
+HOST_IFC='ve'
+NS_IFC='vens'
+NS='ns'
+
+find_mnt() {
+    cat /proc/mounts | \
+	awk '{ if ($3 == "'$1'" && mnt == "") { mnt = $2 }} END { print mnt }'
+}
+
+# Init cgroup2 vars
+init_cgrp2_vars() {
+    CGRP2_ROOT=$(find_mnt cgroup2)
+    if [ -z "$CGRP2_ROOT" ]
+    then
+	CGRP2_ROOT='/mnt/cgroup2'
+	MOUNT_CGRP2="yes"
+    fi
+    CGRP2_TC="$CGRP2_ROOT/tc"
+    CGRP2_TC_LEAF="$CGRP2_TC/leaf"
+}
+
+# Init bpf fs vars
+init_bpf_fs_vars() {
+    local bpf_fs_root=$(find_mnt bpf)
+    [ -n "$bpf_fs_root" ] || return -1
+    BPF_FS_TC_SHARE="$bpf_fs_root/tc/globals"
+}
+
+setup_cgrp2() {
+    case $1 in
+	start)
+	    if [ "$MOUNT_CGRP2" == 'yes' ]
+	    then
+		[ -d $CGRP2_ROOT ] || mkdir -p $CGRP2_ROOT
+		mount -t cgroup2 none $CGRP2_ROOT || return $?
+	    fi
+	    mkdir -p $CGRP2_TC_LEAF
+	    ;;
+	*)
+	    rmdir $CGRP2_TC_LEAF && rmdir $CGRP2_TC
+	    [ "$MOUNT_CGRP2" == 'yes' ] && umount $CGRP2_ROOT
+	    ;;
+    esac
+}
+
+setup_bpf_cgrp2_array() {
+    local bpf_cgrp2_array="$BPF_FS_TC_SHARE/$BPF_CGRP2_ARRAY_NAME"
+    case $1 in
+	start)
+	    $MY_DIR/test_cgrp2_array_pin -U $bpf_cgrp2_array -v $CGRP2_TC
+	    ;;
+	*)
+	    [ -d "$BPF_FS_TC_SHARE" ] && rm -f $bpf_cgrp2_array
+	    ;;
+    esac
+}
+
+setup_net() {
+    case $1 in
+	start)
+	    $IP link add $HOST_IFC type veth peer name $NS_IFC || return $?
+	    $IP link set dev $HOST_IFC up || return $?
+	    sysctl -q net.ipv6.conf.$HOST_IFC.accept_dad=0
+
+	    $IP netns add ns || return $?
+	    $IP link set dev $NS_IFC netns ns || return $?
+	    $IP -n $NS link set dev $NS_IFC up || return $?
+	    $IP netns exec $NS sysctl -q net.ipv6.conf.$NS_IFC.accept_dad=0
+	    $TC qdisc add dev $HOST_IFC clsact || return $?
+	    $TC filter add dev $HOST_IFC egress bpf da obj $BPF_PROG sec $BPF_SECTION || return $?
+	    ;;
+	*)
+	    $IP netns del $NS
+	    $IP link del $HOST_IFC
+	    ;;
+    esac
+}
+
+run_in_cgrp() {
+    # Fork another bash and move it under the specified cgroup.
+    # It makes the cgroup cleanup easier at the end of the test.
+    cmd='echo $$ > '
+    cmd="$cmd $1/cgroup.procs; exec $2"
+    bash -c "$cmd"
+}
+
+do_test() {
+    run_in_cgrp $CGRP2_TC_LEAF "ping -6 -c3 ff02::1%$HOST_IFC >& /dev/null"
+    local dropped=$($TC -s qdisc show dev $HOST_IFC | tail -3 | \
+			   awk '/drop/{print substr($7, 0, index($7, ",")-1)}')
+    if [[ $dropped -eq 0 ]]
+    then
+	echo "FAIL"
+	return 1
+    else
+	echo "Successfully filtered $dropped packets"
+	return 0
+    fi
+}
+
+do_exit() {
+    if [ "$DEBUG" == "yes" ] && [ "$MODE" != 'cleanuponly' ]
+    then
+	echo "------ DEBUG ------"
+	echo "mount: "; mount | egrep '(cgroup2|bpf)'; echo
+	echo "$CGRP2_TC_LEAF: "; ls -l $CGRP2_TC_LEAF; echo
+	if [ -d "$BPF_FS_TC_SHARE" ]
+	then
+	    echo "$BPF_FS_TC_SHARE: "; ls -l $BPF_FS_TC_SHARE; echo
+	fi
+	echo "Host net:"
+	$IP netns
+	$IP link show dev $HOST_IFC
+	$IP -6 a show dev $HOST_IFC
+	$TC -s qdisc show dev $HOST_IFC
+	echo
+	echo "$NS net:"
+	$IP -n $NS link show dev $NS_IFC
+	$IP -n $NS -6 link show dev $NS_IFC
+	echo "------ DEBUG ------"
+	echo
+    fi
+
+    if [ "$MODE" != 'nocleanup' ]
+    then
+	setup_net stop
+	setup_bpf_cgrp2_array stop
+	setup_cgrp2 stop
+    fi
+}
+
+init_cgrp2_vars
+init_bpf_fs_vars
+
+while [[ $# -ge 1 ]]
+do
+    a="$1"
+    case $a in
+	debug)
+	    DEBUG='yes'
+	    shift 1
+	    ;;
+	cleanup-only)
+	    MODE='cleanuponly'
+	    shift 1
+	    ;;
+	no-cleanup)
+	    MODE='nocleanup'
+	    shift 1
+	    ;;
+	*)
+	    echo "test_cgrp2_tc [debug] [cleanup-only | no-cleanup]"
+	    echo "  debug: Print cgrp and network setup details at the end of the test"
+	    echo "  cleanup-only: Try to cleanup things from last test.  No test will be run"
+	    echo "  no-cleanup: Run the test but don't do cleanup at the end"
+	    echo "[Note: If no arg is given, it will run the test and do cleanup at the end]"
+	    echo
+	    exit -1
+	    ;;
+    esac
+done
+
+trap do_exit 0
+
+[ "$MODE" == 'cleanuponly' ] && exit
+
+setup_cgrp2 start || exit $?
+setup_net start || exit $?
+init_bpf_fs_vars || exit $?
+setup_bpf_cgrp2_array start || exit $?
+do_test
+echo