Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 187 insertions, 0 deletions

diff --git a/plat/nvidia/tegra/drivers/spe/shared_console.S b/plat/nvidia/tegra/drivers/spe/shared_console.S
new file mode 100644
index 0000000..d1b18dd
--- /dev/null
+++ b/plat/nvidia/tegra/drivers/spe/shared_console.S
@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020, NVIDIA Corporation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <asm_macros.S>
+#include <assert_macros.S>
+#include <console_macros.S>
+
+#define CONSOLE_NUM_BYTES_SHIFT		24
+#define CONSOLE_FLUSH_DATA_TO_PORT	(1 << 26)
+#define CONSOLE_RING_DOORBELL		(1 << 31)
+#define CONSOLE_IS_BUSY			(1 << 31)
+#define CONSOLE_TIMEOUT			0xC000		/* 50 ms */
+
+	/*
+	 * This file contains a driver implementation to make use of the
+	 * real console implementation provided by the SPE firmware running
+	 * SoCs after Tegra186.
+	 *
+	 * This console is shared by multiple components and the SPE firmware
+	 * finally displays everything on the UART port.
+	 */
+
+	.globl	console_spe_core_init
+	.globl	console_spe_core_putc
+	.globl	console_spe_core_getc
+	.globl	console_spe_core_flush
+	.globl	console_spe_putc
+	.globl	console_spe_getc
+	.globl	console_spe_flush
+	.globl	console_spe_register
+
+.macro	check_if_console_is_ready base, tmp1, tmp2, label
+	/* wait until spe is ready or timeout expires */
+	mrs	\tmp2, cntps_tval_el1
+1:	ldr	\tmp1, [\base]
+	and	\tmp1, \tmp1, #CONSOLE_IS_BUSY
+	cbz	\tmp1, 2f
+	mrs	\tmp1, cntps_tval_el1
+	sub	\tmp1, \tmp2, \tmp1
+	cmp	\tmp1, #CONSOLE_TIMEOUT
+	b.lt	1b
+	b	\label
+2:
+.endm
+
+	/* -------------------------------------------------
+	 * int console_spe_register(uintptr_t baseaddr,
+	 *     uint32_t clock, uint32_t baud,
+	 *     console_t *console);
+	 * Function to initialize and register a new spe
+	 * console. Storage passed in for the console struct
+	 * *must* be persistent (i.e. not from the stack).
+	 * In: x0 - UART register base address
+	 *     w1 - UART clock in Hz
+	 *     w2 - Baud rate
+	 *     x3 - pointer to empty console_t struct
+	 * Out: return 1 on success, 0 on error
+	 * Clobber list : x0, x1, x2, x6, x7, x14
+	 * -------------------------------------------------
+	 */
+func console_spe_register
+	/* Check the input base address */
+	cbz	x0, register_fail
+
+	/* Dont use clock or baud rate, so ok to overwrite them */
+	check_if_console_is_ready x0, x1, x2, register_fail
+
+	cbz	x3, register_fail
+	str	x0, [x3, #CONSOLE_T_BASE]
+	mov	x0, x3
+	finish_console_register spe putc=1, getc=1, flush=1
+
+register_fail:
+	mov	w0, wzr
+	ret
+endfunc console_spe_register
+
+	/* --------------------------------------------------------
+	 * int console_spe_core_putc(int c, uintptr_t base_addr)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - console base address
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2, x3
+	 * --------------------------------------------------------
+	 */
+func console_spe_core_putc
+	/* Check the input parameter */
+	cbz	x1, putc_error
+
+	/* Prepend '\r' to '\n' */
+	cmp	w0, #0xA
+	b.ne	not_eol
+
+	check_if_console_is_ready x1, x2, x3, putc_error
+
+	/* spe is ready */
+	mov	w2, #0xD		/* '\r' */
+	and	w2, w2, #0xFF
+	mov	w3, #(CONSOLE_RING_DOORBELL | (1 << CONSOLE_NUM_BYTES_SHIFT))
+	orr	w2, w2, w3
+	str	w2, [x1]
+
+not_eol:
+	check_if_console_is_ready x1, x2, x3, putc_error
+
+	/* spe is ready */
+	mov	w2, w0
+	and	w2, w2, #0xFF
+	mov	w3, #(CONSOLE_RING_DOORBELL | (1 << CONSOLE_NUM_BYTES_SHIFT))
+	orr	w2, w2, w3
+	str	w2, [x1]
+
+	ret
+putc_error:
+	mov	w0, #-1
+	ret
+endfunc console_spe_core_putc
+
+	/* --------------------------------------------------------
+	 * int console_spe_putc(int c, console_t *console)
+	 * Function to output a character over the console. It
+	 * returns the character printed on success or -1 on error.
+	 * In : w0 - character to be printed
+	 *      x1 - pointer to console_t structure
+	 * Out : return -1 on error else return character.
+	 * Clobber list : x2
+	 * --------------------------------------------------------
+	 */
+func console_spe_putc
+	ldr	x1, [x1, #CONSOLE_T_BASE]
+	b	console_spe_core_putc
+endfunc console_spe_putc
+
+	/* ---------------------------------------------
+	 * int console_spe_getc(console_t *console)
+	 * Function to get a character from the console.
+	 * It returns the character grabbed on success
+	 * or -1 if no character is available.
+	 * In : x0 - pointer to console_t structure
+	 * Out: w0 - character if available, else -1
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_spe_getc
+	mov	w0, #-1
+	ret
+endfunc console_spe_getc
+
+	/* -------------------------------------------------
+	 * void console_spe_core_flush(uintptr_t base_addr)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - console base address
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * -------------------------------------------------
+	 */
+func console_spe_core_flush
+#if ENABLE_ASSERTIONS
+	cmp	x0, #0
+	ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+	/* flush console */
+	mov	w1, #(CONSOLE_RING_DOORBELL | CONSOLE_FLUSH_DATA_TO_PORT)
+	str	w1, [x0]
+	ret
+endfunc console_spe_core_flush
+
+	/* ---------------------------------------------
+	 * void console_spe_flush(console_t *console)
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * In : x0 - pointer to console_t structure
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+func console_spe_flush
+	ldr	x0, [x0, #CONSOLE_T_BASE]
+	b	console_spe_core_flush
+endfunc console_spe_flush