Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 183 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt
new file mode 100644
index 000000000..bbe871f82
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/bus.txt
@@ -0,0 +1,60 @@
+SLIM(Serial Low Power Interchip Media Bus) bus
+
+SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+components like audio-codec.
+
+Required property for SLIMbus controller node:
+- compatible	- name of SLIMbus controller
+
+Child nodes:
+Every SLIMbus controller node can contain zero or more child nodes
+representing slave devices on the bus. Every SLIMbus slave device is
+uniquely determined by the enumeration address containing 4 fields:
+Manufacturer ID, Product code, Device index, and Instance value for
+the device.
+If child node is not present and it is instantiated after device
+discovery (slave device reporting itself present).
+
+In some cases it may be necessary to describe non-probeable device
+details such as non-standard ways of powering up a device. In
+such cases, child nodes for those devices will be present as
+slaves of the SLIMbus controller, as detailed below.
+
+Required property for SLIMbus child node if it is present:
+- reg		- Should be ('Device index', 'Instance ID') from SLIMbus
+		  Enumeration  Address.
+		  Device Index Uniquely identifies multiple Devices within
+		  a single Component.
+		  Instance ID Is for the cases where multiple Devices of the
+		  same type or Class are attached to the bus.
+
+- compatible	-"slimMID,PID". The textual representation of Manufacturer ID,
+	 	  Product Code, shall be in lower case hexadecimal with leading
+		  zeroes suppressed
+
+Optional property for SLIMbus child node if it is present:
+- slim-ifc-dev	- Should be phandle to SLIMBus Interface device.
+		  Required for devices which deal with streams.
+
+SLIMbus example for Qualcomm's slimbus manager component:
+
+	slim@28080000 {
+		compatible = "qcom,apq8064-slim", "qcom,slim";
+		reg = <0x28080000 0x2000>,
+		interrupts = <0 33 0>;
+		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+		clock-names = "iface", "core";
+		#address-cells = <2>;
+		#size-cell = <0>;
+
+		codec_ifd: ifd@0,0{
+			compatible = "slim217,60";
+			reg = <0 0>;
+		};
+
+		codec: wcd9310@1,0{
+			compatible = "slim217,60";
+			reg = <1 0>;
+			slim-ifc-dev  = <&codec_ifd>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
new file mode 100644
index 000000000..e94a2ad3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
@@ -0,0 +1,84 @@
+Qualcomm SLIMBus Non Generic Device (NGD) Controller binding
+
+SLIMBus NGD controller is a light-weight driver responsible for communicating
+with SLIMBus slaves directly over the bus using messaging interface and
+communicating with master component residing on ADSP for bandwidth and
+data-channel management
+
+Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>"
+	must be one of the following.
+	"qcom,slim-ngd-v1.5.0" for MSM8996
+	"qcom,slim-ngd-v2.1.0" for SDM845
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the controller
+		    register space.
+- dmas
+	Usage: required
+	Value type: <array of phandles>
+	Definition: List of rx and tx dma channels
+
+- dma-names
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "rx" and "tx".
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must list controller IRQ.
+
+#address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 1, reflecting the instance id of ngd.
+
+#size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 0
+
+= NGD Devices
+Each subnode represents an instance of NGD, must contain the following
+properties:
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: Should be instance id of ngd.
+
+#address-cells
+	Usage: required
+	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+#size-cells
+	Usage: required
+	Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
+
+= EXAMPLE
+
+slim@91c0000 {
+	compatible = "qcom,slim-ngd-v1.5.0";
+	reg = <0x91c0000 0x2c000>;
+	interrupts = <0 163 0>;
+	dmas =	<&slimbam 3>, <&slimbam 4>;
+	dma-names = "rx", "tx";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ngd@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		codec@1 {
+			compatible = "slim217,1a0";
+			reg  = <1 0>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
new file mode 100644
index 000000000..922dcb8ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
@@ -0,0 +1,39 @@
+Qualcomm SLIMbus controller
+This controller is used if applications processor driver controls SLIMbus
+master component.
+
+Required properties:
+
+ - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
+ - #size-cells	- refer to Documentation/devicetree/bindings/slimbus/bus.txt
+
+ - reg : Offset and length of the register region(s) for the device
+ - reg-names : Register region name(s) referenced in reg above
+	 Required register resource entries are:
+	 "ctrl": Physical address of controller register blocks
+ 	 "slew": required for "qcom,apq8064-slim" SOC.
+ - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
+ 		followed by "qcom,slim" for fallback.
+ - interrupts : Interrupt number used by this controller
+ - clocks : Interface and core clocks used by this SLIMbus controller
+ - clock-names : Required clock-name entries are:
+	"iface" : Interface clock for this controller
+	"core" : Interrupt for controller core's BAM
+
+Example:
+
+	slim@28080000 {
+		compatible = "qcom,apq8064-slim", "qcom,slim";
+		reg = <0x28080000 0x2000>, <0x80207C 4>;
+		reg-names = "ctrl", "slew";
+		interrupts = <0 33 0>;
+		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+		clock-names = "iface", "core";
+		#address-cells = <2>;
+		#size-cell = <0>;
+
+		wcd9310: audio-codec@1,0{
+			compatible = "slim217,60";
+			reg = <1 0>;
+		};
+	};