Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

117 files changed, 18300 insertions, 0 deletions

diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
new file mode 100644
index 000000000..19027129a
--- /dev/null
+++ b/arch/mips/boot/dts/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-$(CONFIG_BMIPS_GENERIC)		+= brcm
+subdir-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon
+subdir-$(CONFIG_MACH_PISTACHIO)		+= img
+subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= img
+subdir-$(CONFIG_MACH_INGENIC)		+= ingenic
+subdir-$(CONFIG_LANTIQ)			+= lantiq
+subdir-$(CONFIG_MACH_LOONGSON64)	+= loongson
+subdir-$(CONFIG_MSCC_OCELOT)		+= mscc
+subdir-$(CONFIG_MIPS_MALTA)		+= mti
+subdir-$(CONFIG_LEGACY_BOARD_SEAD3)	+= mti
+subdir-$(CONFIG_NLM_XLP_BOARD)		+= netlogic
+subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= ni
+subdir-$(CONFIG_MACH_PIC32)		+= pic32
+subdir-$(CONFIG_ATH79)			+= qca
+subdir-$(CONFIG_RALINK)			+= ralink
+subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= xilfpga
+
+obj-$(CONFIG_BUILTIN_DTB)	:= $(addsuffix /, $(subdir-y))
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
new file mode 100644
index 000000000..d85f446cc
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
+dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
+dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
+dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
+dtb-$(CONFIG_DT_BCM97346DBSMB)		+= bcm97346dbsmb.dtb
+dtb-$(CONFIG_DT_BCM97358SVMB)		+= bcm97358svmb.dtb
+dtb-$(CONFIG_DT_BCM97360SVMB)		+= bcm97360svmb.dtb
+dtb-$(CONFIG_DT_BCM97362SVMB)		+= bcm97362svmb.dtb
+dtb-$(CONFIG_DT_BCM97420C)		+= bcm97420c.dtb
+dtb-$(CONFIG_DT_BCM97425SVMB)		+= bcm97425svmb.dtb
+dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U)	+= bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G)	+= bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM)	+= bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM)	+= bcm6362-neufbox6-sercomm.dtb
+
+dtb-$(CONFIG_DT_NONE) += \
+	bcm3368-netgear-cvg834g.dtb \
+	bcm6358-neufbox4-sercomm.dtb \
+	bcm6362-neufbox6-sercomm.dtb \
+	bcm63268-comtrend-vr-3032u.dtb \
+	bcm93384wvg.dtb \
+	bcm93384wvg_viper.dtb \
+	bcm96368mvwg.dtb \
+	bcm9ejtagprb.dtb \
+	bcm97125cbmb.dtb \
+	bcm97346dbsmb.dtb \
+	bcm97358svmb.dtb \
+	bcm97360svmb.dtb \
+	bcm97362svmb.dtb \
+	bcm97420c.dtb \
+	bcm97425svmb.dtb \
+	bcm97435svmb.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 000000000..ed6023a91
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+	compatible = "netgear,cvg834g", "brcm,bcm3368";
+	model = "NETGEAR CVG834G";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
new file mode 100644
index 000000000..d4b2b430d
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@fff8c004 {
+			compatible = "brcm,bcm3368-clocks";
+			reg = <0xfff8c004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@fff8c008 {
+			compatible = "syscon";
+			reg = <0xfff8c008 0x4>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fff8c008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fff8c00c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfff8c00c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
new file mode 100644
index 000000000..eb2a9c6ed
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper";
+
+	memory@0 {
+		device_type = "memory";
+
+		/* Typical ranges.  The bootloader should fill these in. */
+		reg = <0x06000000 0x02000000>,
+		      <0x0e000000 0x02000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1/2 of the CPU core clock (standard MIPS behavior) */
+		mips-hpt-frequency = <300000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: cpu_intc {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <54000000>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "brcm,ubus", "simple-bus";
+		ranges;
+		/* No dma-ranges on Viper. */
+
+		periph_intc: periph_intc@14e00048 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x14e00048 0x4 0x14e0004c 0x4>,
+			      <0x14e00350 0x4 0x14e00354 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <4>;
+		};
+
+		cmips_intc: cmips_intc@151f8048 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x151f8048 0x4 0x151f804c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+			brcm,int-map-mask = <0xffffffff>;
+		};
+
+		uart0: serial@14e00520 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x14e00520 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
+		ehci0: usb@15400300 {
+			compatible = "brcm,bcm3384-ehci", "generic-ehci";
+			reg = <0x15400300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			status = "disabled";
+		};
+
+		ohci0: usb@15400400 {
+			compatible = "brcm,bcm3384-ohci", "generic-ohci";
+			reg = <0x15400400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi
new file mode 100644
index 000000000..d7ad769a4
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3384", "brcm,bcm33843";
+
+	memory@0 {
+		device_type = "memory";
+
+		/* Typical range.  The bootloader should fill this in. */
+		reg = <0x0 0x08000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* On BMIPS5000 this is 1/8th of the CPU core clock */
+		mips-hpt-frequency = <100000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	cpu_intc: cpu_intc {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <54000000>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "brcm,ubus", "simple-bus";
+		ranges;
+		dma-ranges = <0x00000000 0x08000000 0x08000000>,
+			     <0x08000000 0x00000000 0x08000000>;
+
+		periph_intc: periph_intc@14e00038 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x14e00038 0x4 0x14e0003c 0x4>,
+			      <0x14e00340 0x4 0x14e00344 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <4>;
+		};
+
+		zmips_intc: zmips_intc@104b0060 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x104b0060 0x4 0x104b0064 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <29>;
+			brcm,int-map-mask = <0xffffffff>;
+		};
+
+		iop_intc: iop_intc@14e00058 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x14e00058 0x4 0x14e0005c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <6>;
+			brcm,int-map-mask = <0xffffffff>;
+		};
+
+		uart0: serial@14e00520 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x14e00520 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
+		ehci0: usb@15400300 {
+			compatible = "brcm,bcm3384-ehci", "generic-ehci";
+			reg = <0x15400300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			status = "disabled";
+		};
+
+		ohci0: usb@15400400 {
+			compatible = "brcm,bcm3384-ohci", "generic-ohci";
+			reg = <0x15400400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 000000000..8d010b919
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+	model = "Comtrend VR-3032u";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "okay";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	led@0 {
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+		/* GPHY0 Speed 0 */
+	};
+	led@1 {
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+		/* GPHY0 Speed 1 */
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "vr-3032u:red:inet";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "vr-3032u:green:dsl";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "vr-3032u:green:usb";
+	};
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "vr-3032u:green:wps";
+	};
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "vr-3032u:green:inet";
+	};
+	led@9 {
+		reg = <9>;
+		brcm,hardware-controlled;
+		/* EPHY0 Activity */
+	};
+	led@10 {
+		reg = <10>;
+		brcm,hardware-controlled;
+		/* EPHY1 Activity */
+	};
+	led@11 {
+		reg = <11>;
+		brcm,hardware-controlled;
+		/* EPHY2 Activity */
+	};
+	led@12 {
+		reg = <12>;
+		brcm,hardware-controlled;
+		/* GPHY0 Activity */
+	};
+	led@13 {
+		reg = <13>;
+		brcm,hardware-controlled;
+		/* EPHY0 Speed */
+	};
+	led@14 {
+		reg = <14>;
+		brcm,hardware-controlled;
+		/* EPHY1 Speed */
+	};
+	led@15 {
+		reg = <15>;
+		brcm,hardware-controlled;
+		/* EPHY2 Speed */
+	};
+	led@20 {
+		reg = <20>;
+		active-low;
+		label = "vr-3032u:green:power";
+		default-state = "on";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
new file mode 100644
index 000000000..365fa75cd
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm63268-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@10000008 {
+			compatible = "syscon";
+			reg = <0x10000008 0x4>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@1000184c {
+			compatible = "brcm,bcm6328-power-controller";
+			reg = <0x1000184c 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
new file mode 100644
index 000000000..1f9edd710
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6328";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <160000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6328-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <28>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <39>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		timer: syscon@10000040 {
+			compatible = "syscon";
+			reg = <0x10000040 0x2c>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000068 {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x28>;
+			mask = <0x1>;
+		};
+
+		leds0: led-controller@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000800 0x24>;
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@10001848 {
+			compatible = "brcm,bcm6328-power-controller";
+			reg = <0x10001848 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6328-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <42>;
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6328-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
new file mode 100644
index 000000000..53e57cc29
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+	compatible = "sfr,nb4-ser", "brcm,bcm6358";
+	model = "SFR Neufbox 4 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "okay";
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		label = "nb4-ser:white:alarm";
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "nb4-ser:white:tv";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "nb4-ser:white:tel";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "nb4-ser:white:adsl";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
new file mode 100644
index 000000000..89a3107ca
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6358";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@fffe0004 {
+			compatible = "brcm,bcm6358-clocks";
+			reg = <0xfffe0004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@fffe0008 {
+			compatible = "syscon";
+			reg = <0xfffe0008 0x4>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fffe0008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fffe000c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfffe000c 0x8>,
+			      <0xfffe0038 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		leds0: led-controller@fffe00d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0xfffe00d0 0x8>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@fffe0100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		uart1: serial@fffe0120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfffe0120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		ehci: usb@fffe1300 {
+			compatible = "brcm,bcm6358-ehci", "generic-ehci";
+			reg = <0xfffe1300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		ohci: usb@fffe1400 {
+			compatible = "brcm,bcm6358-ohci", "generic-ohci";
+			reg = <0xfffe1400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 000000000..3e83bee5b
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+	compatible = "sfr,nb6-ser", "brcm,bcm6362";
+	model = "SFR NeufBox 6 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 000000000..0b2adefd7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6362-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@10000008 {
+			compatible = "syscon";
+			reg = <0x10000008 0x4>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@10001848 {
+			compatible = "brcm,bcm6362-power-controller";
+			reg = <0x10001848 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
new file mode 100644
index 000000000..b84a3bfe8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		clkctl: clock-controller@10000004 {
+			compatible = "brcm,bcm6368-clocks";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+
+		periph_cntl: syscon@100000008 {
+			compatible = "syscon";
+			reg = <0x10000008 0x4>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		leds0: led-controller@100000d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0x100000d0 0x8>;
+			status = "disabled";
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		ehci: usb@10001500 {
+			compatible = "brcm,bcm6368-ehci", "generic-ehci";
+			reg = <0x10001500 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		ohci: usb@10001600 {
+			compatible = "brcm,bcm6368-ohci", "generic-ohci";
+			reg = <0x10001600 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
new file mode 100644
index 000000000..5bf77b6fc
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7125";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <202500000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4380";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4380";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@441400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x441400 0x30>, <0x441600 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@401800 {
+			compatible = "brcm,l2-intc";
+			reg = <0x401800 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <23>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x2f7>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+						     "bsp_0", "rdc_0", "rptd_0",
+						     "avd_0", "jtag_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406780 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0xf000000>, <0x100000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <18>, <19>, <20>;
+			interrupt-names = "upg_main", "upg_bsc", "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7125-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x60c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,bcm7038-reboot";
+			syscon = <&sun_top_ctrl 0x8 0x14>;
+		};
+
+		uart0: serial@406b00 {
+			compatible = "ns16550a";
+			reg = <0x406b00 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <21>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <64>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
+		ehci0: usb@488300 {
+			compatible = "brcm,bcm7125-ehci", "generic-ehci";
+			reg = <0x488300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>;
+			status = "disabled";
+		};
+
+		ohci0: usb@488400 {
+			compatible = "brcm,bcm7125-ohci", "generic-ohci";
+			reg = <0x488400 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <79>;
+		};
+
+		qspi: spi@443000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@406400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x406400 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
new file mode 100644
index 000000000..2afa0dada
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7346";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <163125000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@411400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x411400 0x30>, <0x411600 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <51>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x673>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+						     "rdc_0", "raaga_0",
+						     "jtag_0", "svd_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406780 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0xf000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <59>, <57>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>, <58>, <62>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406900 {
+			compatible = "ns16550a";
+			reg = <0x406900 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <64>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406940 {
+			compatible = "ns16550a";
+			reg = <0x406940 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406980 {
+			compatible = "ns16550a";
+			reg = <0x406980 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
+		enet0: ethernet@430000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v2";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x430000 0x4c8c>;
+			interrupts = <24>, <25>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v2";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7346-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <68>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7346-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		ehci1: usb@480500 {
+			compatible = "brcm,bcm7346-ehci", "generic-ehci";
+			reg = <0x480500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <69>;
+			status = "disabled";
+		};
+
+		ohci1: usb@480600 {
+			compatible = "brcm,bcm7346-ohci", "generic-ohci";
+			reg = <0x480600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ehci2: usb@490300 {
+			compatible = "brcm,bcm7346-ehci", "generic-ehci";
+			reg = <0x490300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <73>;
+			status = "disabled";
+		};
+
+		ohci2: usb@490400 {
+			compatible = "brcm,bcm7346-ohci", "generic-ohci";
+			reg = <0x490400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ehci3: usb@490500 {
+			compatible = "brcm,bcm7346-ehci", "generic-ehci";
+			reg = <0x490500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <74>;
+			status = "disabled";
+		};
+
+		ohci3: usb@490600 {
+			compatible = "brcm,bcm7346-ohci", "generic-ohci";
+			reg = <0x490600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <76>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sdhci0: sdhci@413500 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x413500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <85>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
new file mode 100644
index 000000000..6375fc77f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7358";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <375000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@411400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x411400 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x2f3>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+						     "rdc_0", "raaga_0",
+						     "avd_0", "jtag_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406600 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406600 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406800 {
+			compatible = "ns16550a";
+			reg = <0x406800 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406840 {
+			compatible = "ns16550a";
+			reg = <0x406840 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406880 {
+			compatible = "ns16550a";
+			reg = <0x406880 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <63>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406700 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406700 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
+		enet0: ethernet@430000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v2";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x430000 0x4c8c>;
+			interrupts = <24>, <25>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v2";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7358-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7358-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
new file mode 100644
index 000000000..a57cacea9
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7360";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <375000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips3300";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@411400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x411400 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x2f3>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+						     "rdc_0", "raaga_0",
+						     "avd_0", "jtag_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406600 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406600 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406800 {
+			compatible = "ns16550a";
+			reg = <0x406800 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406840 {
+			compatible = "ns16550a";
+			reg = <0x406840 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406880 {
+			compatible = "ns16550a";
+			reg = <0x406880 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <63>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@406680 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x406680 0x40>;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
+		enet0: ethernet@430000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v2";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x430000 0x4c8c>;
+			interrupts = <24>, <25>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v2";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7360-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7360-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <86>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
new file mode 100644
index 000000000..728b9e9f8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <375000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4380";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4380";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@411400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x411400 0x30>, <0x411600 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x2f3>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+						     "rdc_0", "raaga_0",
+						     "avd_0", "jtag_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406600 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406600 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406800 {
+			compatible = "ns16550a";
+			reg = <0x406800 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406840 {
+			compatible = "ns16550a";
+			reg = <0x406840 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406880 {
+			compatible = "ns16550a";
+			reg = <0x406880 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <63>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4066a8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4066a8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@406680 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x406680 0x40>;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
+		enet0: ethernet@430000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v2";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x430000 0x4c8c>;
+			interrupts = <24>, <25>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v2";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7362-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7362-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <86>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <31>;
+		};
+
+		qspi: spi@413000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@408a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x408a00 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@408e80 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x408e80 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0xa000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
new file mode 100644
index 000000000..9540c27f1
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7420";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <93750000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@441400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x441400 0x30>, <0x441600 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@401800 {
+			compatible = "brcm,l2-intc";
+			reg = <0x401800 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <23>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x3ff>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+						     "pcie_0", "bsp_0", "rdc_0",
+						     "rptd_0", "avd_0", "avd_1",
+						     "jtag_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406780 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x1f000000>, <0x100000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <18>, <19>, <20>;
+			interrupt-names = "upg_main", "upg_bsc", "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x60c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,bcm7038-reboot";
+			syscon = <&sun_top_ctrl 0x8 0x14>;
+		};
+
+		uart0: serial@406b00 {
+			compatible = "ns16550a";
+			reg = <0x406b00 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <21>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <64>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@406800 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406800 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406880 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406880 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
+		enet0: ethernet@468000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v1";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x468000 0x3c8c>;
+			interrupts = <69>, <79>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v1";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,65nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@488300 {
+			compatible = "brcm,bcm7420-ehci", "generic-ehci";
+			reg = <0x488300 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>;
+			status = "disabled";
+		};
+
+		ohci0: usb@488400 {
+			compatible = "brcm,bcm7420-ohci", "generic-ohci";
+			reg = <0x488400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			status = "disabled";
+		};
+
+		ehci1: usb@488500 {
+			compatible = "brcm,bcm7420-ehci", "generic-ehci";
+			reg = <0x488500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		ohci1: usb@488600 {
+			compatible = "brcm,bcm7420-ohci", "generic-ohci";
+			reg = <0x488600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@411d00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411d00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <78>;
+		};
+
+		qspi: spi@443000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@406400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x406400 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
new file mode 100644
index 000000000..aa0b2d39c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7425";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <163125000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips5000";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@41a400 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x41a400 0x30>, <0x41a600 0x30>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7400-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0x177b>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
+						     "bsp_0", "rdc_0",
+						     "raaga_0", "avd_1",
+						     "jtag_0", "svd_0",
+						     "vice_0";
+		};
+
+		upg_irq0_intc: interrupt-controller@406780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406780 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <55>, <53>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@409480 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x409480 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <56>, <54>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406b00 {
+			compatible = "ns16550a";
+			reg = <0x406b00 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <62>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <63>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@409180 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409180 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@409400 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409400 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+		enet0: ethernet@b80000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v3";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0xb80000 0x11c88>;
+			interrupts = <17>, <18>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v3";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7425-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <65>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7425-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <67>;
+			status = "disabled";
+		};
+
+		ehci1: usb@480500 {
+			compatible = "brcm,bcm7425-ehci", "generic-ehci";
+			reg = <0x480500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			status = "disabled";
+		};
+
+		ohci1: usb@480600 {
+			compatible = "brcm,bcm7425-ohci", "generic-ohci";
+			reg = <0x480600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <68>;
+			status = "disabled";
+		};
+
+		ehci2: usb@490300 {
+			compatible = "brcm,bcm7425-ehci", "generic-ehci";
+			reg = <0x490300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		ohci2: usb@490400 {
+			compatible = "brcm,bcm7425-ohci", "generic-ohci";
+			reg = <0x490400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		ehci3: usb@490500 {
+			compatible = "brcm,bcm7425-ehci", "generic-ehci";
+			reg = <0x490500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci3: usb@490600 {
+			compatible = "brcm,bcm7425-ohci", "generic-ohci";
+			reg = <0x490600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <73>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@41a000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41a000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41b800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-edu";
+			reg = <0x41b800 0x400>, <0x41bc00 0x24>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sdhci0: sdhci@419000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <43>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@419200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <44>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@41ad00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41ad00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <25>;
+		};
+
+		qspi: spi@41c000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x419920 0x4 0x41c200 0x188 0x41c000 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@409200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x409200 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@409580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x409580 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0x1a000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+
+		memory-controller@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x10000 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
new file mode 100644
index 000000000..8398b7f68
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm7435";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <175625000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips5200";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips5200";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "brcm,bmips5200";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "brcm,bmips5200";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <81000000>;
+		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges = <0 0x10000000 0x01000000>;
+
+		periph_intc: interrupt-controller@41b500 {
+			compatible = "brcm,bcm7038-l1-intc";
+			reg = <0x41b500 0x40>, <0x41b600 0x40>,
+				<0x41b700 0x40>, <0x41b800 0x40>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>, <2>, <3>;
+		};
+
+		sun_l2_intc: interrupt-controller@403000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x403000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <52>;
+		};
+
+		gisb-arb@400000 {
+			compatible = "brcm,bcm7435-gisb-arb";
+			reg = <0x400000 0xdc>;
+			native-endian;
+			interrupt-parent = <&sun_l2_intc>;
+			interrupts = <0>, <2>;
+			brcm,gisb-arb-master-mask = <0xf77f>;
+			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
+						     "pcie_0", "bsp_0",
+						     "rdc_0", "raaga_0",
+						     "avd_1", "jtag_0",
+						     "svd_0", "vice_0",
+						     "vice_1", "raaga_1",
+						     "scpu";
+		};
+
+		upg_irq0_intc: interrupt-controller@406780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x406780 0x8>;
+
+			brcm,int-map-mask = <0x44>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>, <58>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: interrupt-controller@409480 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x409480 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <61>, <59>, <64>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+			reg = <0x404000 0x51c>;
+			native-endian;
+		};
+
+		reboot {
+			compatible = "brcm,brcmstb-reboot";
+			syscon = <&sun_top_ctrl 0x304 0x308>;
+		};
+
+		uart0: serial@406b00 {
+			compatible = "ns16550a";
+			reg = <0x406b00 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <66>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@406b40 {
+			compatible = "ns16550a";
+			reg = <0x406b40 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <67>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@406b80 {
+			compatible = "ns16550a";
+			reg = <0x406b80 0x20>;
+			reg-io-width = <0x4>;
+			reg-shift = <0x2>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <68>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		bsca: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@409400 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409400 0x58>;
+		      interrupts = <28>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@409180 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x409180 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@4067e8 {
+			clocks = <&upg_clk>;
+			compatible = "brcm,bcm7038-wdt";
+			reg = <0x4067e8 0x14>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		aon_ctrl: syscon@408000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x408000 0x100>, <0x408200 0x200>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		timers: timer@4067c0 {
+			compatible = "brcm,brcmstb-timers";
+			reg = <0x4067c0 0x40>;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+		enet0: ethernet@b80000 {
+			phy-mode = "internal";
+			phy-handle = <&phy1>;
+			mac-address = [ 00 10 18 36 23 1a ];
+			compatible = "brcm,genet-v3";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0xb80000 0x11c88>;
+			interrupts = <17>, <18>;
+			interrupt-parent = <&periph_intc>;
+			status = "disabled";
+
+			mdio@e14 {
+				compatible = "brcm,genet-mdio-v3";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0xe14 0x8>;
+
+				phy1: ethernet-phy@1 {
+					max-speed = <100>;
+					reg = <0x1>;
+					compatible = "brcm,40nm-ephy",
+						"ethernet-phy-ieee802.3-c22";
+				};
+			};
+		};
+
+		ehci0: usb@480300 {
+			compatible = "brcm,bcm7435-ehci", "generic-ehci";
+			reg = <0x480300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		ohci0: usb@480400 {
+			compatible = "brcm,bcm7435-ohci", "generic-ohci";
+			reg = <0x480400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <72>;
+			status = "disabled";
+		};
+
+		ehci1: usb@480500 {
+			compatible = "brcm,bcm7435-ehci", "generic-ehci";
+			reg = <0x480500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		ohci1: usb@480600 {
+			compatible = "brcm,bcm7435-ohci", "generic-ohci";
+			reg = <0x480600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <73>;
+			status = "disabled";
+		};
+
+		ehci2: usb@490300 {
+			compatible = "brcm,bcm7435-ehci", "generic-ehci";
+			reg = <0x490300 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <75>;
+			status = "disabled";
+		};
+
+		ohci2: usb@490400 {
+			compatible = "brcm,bcm7435-ohci", "generic-ohci";
+			reg = <0x490400 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <77>;
+			status = "disabled";
+		};
+
+		ehci3: usb@490500 {
+			compatible = "brcm,bcm7435-ehci", "generic-ehci";
+			reg = <0x490500 0x100>;
+			native-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <76>;
+			status = "disabled";
+		};
+
+		ohci3: usb@490600 {
+			compatible = "brcm,bcm7435-ohci", "generic-ohci";
+			reg = <0x490600 0x100>;
+			native-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <78>;
+			status = "disabled";
+		};
+
+		hif_l2_intc: interrupt-controller@41b000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41b000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41c800 {
+			compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-dma";
+			reg = <0x41c800 0x600>, <0x41d000 0x100>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>, <4>;
+			status = "disabled";
+		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <45>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@180100 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		sdhci0: sdhci@41a000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@41a200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		spi_l2_intc: interrupt-controller@41bd00 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41bd00 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <25>;
+		};
+
+		qspi: spi@41d200 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-qspi";
+			clocks = <&upg_clk>;
+			reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>;
+			reg-names = "cs_reg", "hif_mspi", "bspi";
+			interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+			interrupt-parent = <&spi_l2_intc>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overread",
+					  "mspi_done",
+					  "mspi_halted";
+			status = "disabled";
+		};
+
+		mspi: spi@409200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,spi-bcm-qspi",
+				     "brcm,spi-brcmstb-mspi";
+			clocks = <&upg_clk>;
+			reg = <0x409200 0x180>;
+			reg-names = "mspi";
+			interrupts = <0x14>;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupt-names = "mspi_done";
+			status = "disabled";
+		};
+
+		waketimer: waketimer@409580 {
+			compatible = "brcm,brcmstb-waketimer";
+			reg = <0x409580 0x14>;
+			interrupts = <0x3>;
+			interrupt-parent = <&aon_pm_l2_intc>;
+			interrupt-names = "timer";
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+	};
+
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x103b0000 0x1a000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memory-controller@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x0 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+
+		memory-controller@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			ranges = <0x0 0x10000 0xa000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			memc-arb@1000 {
+				compatible = "brcm,brcmstb-memc-arb";
+				reg = <0x1000 0x248>;
+			};
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x300>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy";
+				reg = <0x6000 0xc8>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy";
+				reg = <0x8000 0x13c>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
new file mode 100644
index 000000000..601e4d929
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3384_zephyr.dtsi"
+
+/ {
+	compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
+	model = "Broadcom BCM93384WVG";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
new file mode 100644
index 000000000..938a8e661
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3384_viper.dtsi"
+
+/ {
+	compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper";
+	model = "Broadcom BCM93384WVG-viper";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
new file mode 100644
index 000000000..6d772c394
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+	compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
+	model = "Broadcom BCM96368MVWG";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* FIXME: need to set up USB_CTRL registers first */
+&ehci {
+	status = "disabled";
+};
+
+&ohci {
+	status = "disabled";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
new file mode 100644
index 000000000..79e9769f7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7125.dtsi"
+
+/ {
+	compatible = "brcm,bcm97125cbmb", "brcm,bcm7125";
+	model = "Broadcom BCM97125CBMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+/* FIXME: USB is wonky; disable it for now */
+&ehci0 {
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&mspi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
new file mode 100644
index 000000000..28370ff77
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
+	model = "Broadcom BCM97346DBSMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
new file mode 100644
index 000000000..41c1b510c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+
+/ {
+	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
+	model = "Broadcom BCM97358SVMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
new file mode 100644
index 000000000..9f6c6c9b7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7360.dtsi"
+
+/ {
+	compatible = "brcm,bcm97360svmb", "brcm,bcm7360";
+	model = "Broadcom BCM97360SVMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
new file mode 100644
index 000000000..df8b755c3
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+
+/ {
+	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
+	model = "Broadcom BCM97362SVMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
new file mode 100644
index 000000000..086faeaa3
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7420.dtsi"
+
+/ {
+	compatible = "brcm,bcm97420c", "brcm,bcm7420";
+	model = "Broadcom BCM97420C";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>,
+		      <0x20000000 0x30000000>,
+		      <0x60000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+/* FIXME: MAC driver comes up but cannot attach to PHY */
+&enet0 {
+	status = "disabled";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&mspi {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
new file mode 100644
index 000000000..0ed22217b
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
+	model = "Broadcom BCM97425SVMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>,
+		      <0x20000000 0x30000000>,
+		      <0x90000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		spi-cpha;
+		use-bspi;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash0.cfe@0 {
+				reg = <0x0 0x200000>;
+			};
+
+			flash0.mac@200000 {
+				reg = <0x200000 0x40000>;
+			};
+
+			flash0.nvram@240000 {
+				reg = <0x240000 0x10000>;
+			};
+		};
+	};
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
new file mode 100644
index 000000000..2c145a883
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
+	model = "Broadcom BCM97435SVMB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>,
+		      <0x20000000 0x30000000>,
+		      <0x90000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&enet0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&mspi {
+	status = "okay";
+};
+
+&waketimer {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 000000000..96c30d857
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+		brcm,nand-oob-sector-size = <27>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 000000000..7b5afefbb
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
new file mode 100644
index 000000000..8d58c1971
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6328.dtsi"
+
+/ {
+	compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328";
+	model = "Broadcom BCM9EJTAGPRB";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
new file mode 100644
index 000000000..17aef35f3
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_CAVIUM_OCTEON_SOC)	+= octeon_3xxx.dtb octeon_68xx.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
new file mode 100644
index 000000000..2fdb4baad
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-1000N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-1000n";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <500000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb1 {
+			label = "usb1";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "usb2";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless1 {
+			label = "5g";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless2 {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 000000000..b4acdb26a
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 000000000..e04237281
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-500n";
+	compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <300000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
new file mode 100644
index 000000000..dda0559ce
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use.	 Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy0: ethernet-phy@0 {
+				compatible = "marvell,88e1118";
+				marvell,reg-init =
+					/* Fix rx and tx clock transition timing */
+					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+					/* Adjust LED drive. */
+					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+					/* irq, blink-activity, blink-link */
+					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "marvell,88e1118";
+				marvell,reg-init =
+					/* Fix rx and tx clock transition timing */
+					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+					/* Adjust LED drive. */
+					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+					/* irq, blink-activity, blink-link */
+					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+				reg = <1>;
+			};
+
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy4: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+
+			phy6: ethernet-phy@6 {
+				reg = <6>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy7: ethernet-phy@7 {
+				reg = <7>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy9: ethernet-phy@9 {
+				reg = <9>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+		};
+
+		smi1: mdio@1180000001900 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00001900 0x0 0x40>;
+
+			phy100: ethernet-phy@1 {
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy101: ethernet-phy@2 {
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy102: ethernet-phy@3 {
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+			phy103: ethernet-phy@4 {
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+				interrupt-parent = <&gpio>;
+				interrupts = <12 8>; /* Pin 12, active low */
+			};
+		};
+
+		mix0: ethernet@1070000100000 {
+			compatible = "cavium,octeon-5750-mix";
+			reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+			      <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
+			      <0x11800 0xE0002000 0x0 0x8>;   /* AGL_PRT_CTL */
+			cell-index = <0>;
+			interrupts = <0 62>, <1 46>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			phy-handle = <&phy0>;
+		};
+
+		mix1: ethernet@1070000100800 {
+			compatible = "cavium,octeon-5750-mix";
+			reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+			      <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
+			      <0x11800 0xE0002008 0x0 0x8>;   /* AGL_PRT_CTL */
+			cell-index = <1>;
+			interrupts = <1 18>, < 1 46>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			phy-handle = <&phy1>;
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					phy-handle = <&phy2>;
+					cavium,alt-phy-handle = <&phy100>;
+					rx-delay = <0>;
+					tx-delay = <0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					phy-handle = <&phy3>;
+					cavium,alt-phy-handle = <&phy101>;
+					rx-delay = <0>;
+					tx-delay = <0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy4>;
+					cavium,alt-phy-handle = <&phy102>;
+					rx-delay = <0>;
+					tx-delay = <0>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy5>;
+					cavium,alt-phy-handle = <&phy103>;
+				};
+				ethernet@4 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x4>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@5 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x5>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@6 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x6>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@7 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x7>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@8 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x8>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@9 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x9>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@a {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xa>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@b {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xb>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@c {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xc>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@d {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xd>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@e {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xe>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@f {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0xf>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+			};
+
+			interface@1 {
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy6>;
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy7>;
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy8>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy9>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+			tmp@4c {
+				compatible = "ti,tmp421";
+				reg = <0x4c>;
+			};
+		};
+
+		twsi1: i2c@1180000001200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cavium,octeon-3860-twsi";
+			reg = <0x11800 0x00001200 0x0 0x200>;
+			interrupts = <0 59>;
+			clock-frequency = <100000>;
+		};
+
+		uart1: serial@1180000000c00 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000c00 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <0 35>;
+		};
+
+		uart2: serial@1180000000400 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000400 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <1 16>;
+		};
+
+		bootbus: bootbus@1180000000000 {
+			led0: led-display@4,0 {
+				compatible = "avago,hdsp-253x";
+				reg = <4 0x20 0x20>, <4 0 0x20>;
+			};
+
+			cf0: compact-flash@5,0 {
+				compatible = "cavium,ebt3000-compact-flash";
+				reg = <5 0 0x10000>, <6 0 0x10000>;
+				cavium,bus-width = <16>;
+				cavium,true-ide;
+				cavium,dma-engine-handle = <&dma0>;
+			};
+		};
+
+		uctl: uctl@118006f000000 {
+			compatible = "cavium,octeon-6335-uctl";
+			reg = <0x11800 0x6f000000 0x0 0x100>;
+			ranges; /* Direct mapping */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			/* 12MHz, 24MHz and 48MHz allowed */
+			refclk-frequency = <12000000>;
+			/* Either "crystal" or "external" */
+			refclk-type = "crystal";
+
+			ehci@16f0000000000 {
+				compatible = "cavium,octeon-6335-ehci","usb-ehci";
+				reg = <0x16f00 0x00000000 0x0 0x100>;
+				interrupts = <0 56>;
+				big-endian-regs;
+			};
+			ohci@16f0000000400 {
+				compatible = "cavium,octeon-6335-ohci","usb-ohci";
+				reg = <0x16f00 0x00000400 0x0 0x100>;
+				interrupts = <0 56>;
+				big-endian-regs;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			/* 12MHz, 24MHz and 48MHz allowed */
+			refclk-frequency = <12000000>;
+			/* Either "crystal" or "external" */
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		mix0 = &mix0;
+		mix1 = &mix1;
+		pip = &pip;
+		smi0 = &smi0;
+		smi1 = &smi1;
+		twsi0 = &twsi0;
+		twsi1 = &twsi1;
+		uart0 = &uart0;
+		uart1 = &uart1;
+		uart2 = &uart2;
+		flash0 = &flash0;
+		cf0 = &cf0;
+		uctl = &uctl;
+		usbn = &usbn;
+		led0 = &led0;
+	};
+ };
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi
new file mode 100644
index 000000000..3c296623d
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/* OCTEON 3XXX DTS common parts. */
+
+/dts-v1/;
+
+/ {
+	compatible = "cavium,octeon-3860";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&ciu>;
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges; /* Direct mapping */
+
+		ciu: interrupt-controller@1070000000000 {
+			compatible = "cavium,octeon-3860-ciu";
+			interrupt-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) Controller register (0 or 1)
+			 * 2) Bit within the register (0..63)
+			 */
+			#interrupt-cells = <2>;
+			reg = <0x10700 0x00000000 0x0 0x7000>;
+		};
+
+		gpio: gpio-controller@1070000000800 {
+			#gpio-cells = <2>;
+			compatible = "cavium,octeon-3860-gpio";
+			reg = <0x10700 0x00000800 0x0 0x100>;
+			gpio-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) GPIO pin number (0..15)
+			 * 2) Triggering (1 - edge rising
+			 *		  2 - edge falling
+			 *		  4 - level active high
+			 *		  8 - level active low)
+			 */
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			/* The GPIO pin connect to 16 consecutive CUI bits */
+			interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+				     <0 20>, <0 21>, <0 22>, <0 23>,
+				     <0 24>, <0 25>, <0 26>, <0 27>,
+				     <0 28>, <0 29>, <0 30>, <0 31>;
+		};
+
+		smi0: mdio@1180000001800 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00001800 0x0 0x40>;
+		};
+
+		pip: pip@11800a0000000 {
+			compatible = "cavium,octeon-3860-pip";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+			interface@0 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+			};
+
+			interface@1 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>; /* interface */
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cavium,octeon-3860-twsi";
+			reg = <0x11800 0x00001000 0x0 0x200>;
+			interrupts = <0 45>;
+			clock-frequency = <100000>;
+		};
+
+		uart0: serial@1180000000800 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000800 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <0 34>;
+		};
+
+		bootbus: bootbus@1180000000000 {
+			compatible = "cavium,octeon-3860-bootbus";
+			reg = <0x11800 0x00000000 0x0 0x200>;
+			/* The chip select number and offset */
+			#address-cells = <2>;
+			/* The size of the chip select region */
+			#size-cells = <1>;
+			ranges = <0 0  0x0 0x1f400000  0xc00000>,
+				 <1 0  0x10000 0x30000000  0>,
+				 <2 0  0x10000 0x40000000  0>,
+				 <3 0  0x10000 0x50000000  0>,
+				 <4 0  0x0 0x1d020000  0x10000>,
+				 <5 0  0x0 0x1d040000  0x10000>,
+				 <6 0  0x0 0x1d050000  0x10000>,
+				 <7 0  0x10000 0x90000000  0>;
+
+			cavium,cs-config@0 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <0>;
+				cavium,t-adr  = <20>;
+				cavium,t-ce   = <60>;
+				cavium,t-oe   = <60>;
+				cavium,t-we   = <45>;
+				cavium,t-rd-hld = <35>;
+				cavium,t-wr-hld = <45>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <35>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@4 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <4>;
+				cavium,t-adr  = <320>;
+				cavium,t-ce   = <320>;
+				cavium,t-oe   = <320>;
+				cavium,t-we   = <320>;
+				cavium,t-rd-hld = <320>;
+				cavium,t-wr-hld = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@5 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <5>;
+				cavium,t-adr  = <5>;
+				cavium,t-ce   = <300>;
+				cavium,t-oe   = <125>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <30>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <16>;
+			};
+			cavium,cs-config@6 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <6>;
+				cavium,t-adr  = <5>;
+				cavium,t-ce   = <300>;
+				cavium,t-oe   = <270>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <70>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <0>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,wait-mode;
+				cavium,bus-width = <16>;
+			};
+
+			flash0: nor@0,0 {
+				compatible = "cfi-flash";
+				reg = <0 0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		dma0: dma-engine@1180000000100 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000100 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+
+		dma1: dma-engine@1180000000108 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000108 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+
+		usbn: usbn@1180068000000 {
+			compatible = "cavium,octeon-5750-usbn";
+			reg = <0x11800 0x68000000 0x0 0x1000>;
+			ranges; /* Direct mapping */
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			usbc@16f0010000000 {
+				compatible = "cavium,octeon-5750-usbc";
+				reg = <0x16f00 0x10000000 0x0 0x80000>;
+				interrupts = <0 56>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
new file mode 100644
index 000000000..3d0acbb2e
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/*
+ * OCTEON 68XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use.	 Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+	compatible = "cavium,octeon-6880";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&ciu2>;
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges; /* Direct mapping */
+
+		ciu2: interrupt-controller@1070100000000 {
+			compatible = "cavium,octeon-6880-ciu2";
+			interrupt-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) Controller register (0 or 7)
+			 * 2) Bit within the register (0..63)
+			 */
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x10701 0x00000000 0x0 0x4000000>;
+		};
+
+		gpio: gpio-controller@1070000000800 {
+			#gpio-cells = <2>;
+			compatible = "cavium,octeon-3860-gpio";
+			reg = <0x10700 0x00000800 0x0 0x100>;
+			gpio-controller;
+			/* Interrupts are specified by two parts:
+			 * 1) GPIO pin number (0..15)
+			 * 2) Triggering (1 - edge rising
+			 *		  2 - edge falling
+			 *		  4 - level active high
+			 *		  8 - level active low)
+			 */
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			/* The GPIO pins connect to 16 consecutive CUI bits */
+			interrupts = <7 0>,  <7 1>,  <7 2>,  <7 3>,
+				     <7 4>,  <7 5>,  <7 6>,  <7 7>,
+				     <7 8>,  <7 9>,  <7 10>, <7 11>,
+				     <7 12>, <7 13>, <7 14>, <7 15>;
+		};
+
+		smi0: mdio@1180000003800 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00003800 0x0 0x40>;
+
+			phy0: ethernet-phy@6 {
+				compatible = "marvell,88e1118";
+				marvell,reg-init =
+					/* Fix rx and tx clock transition timing */
+					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+					/* Adjust LED drive. */
+					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+					/* irq, blink-activity, blink-link */
+					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+				reg = <6>;
+			};
+
+			phy1: ethernet-phy@1 {
+				cavium,qlm-trim = "4,sgmii";
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy2: ethernet-phy@2 {
+				cavium,qlm-trim = "4,sgmii";
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy3: ethernet-phy@3 {
+				cavium,qlm-trim = "4,sgmii";
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy4: ethernet-phy@4 {
+				cavium,qlm-trim = "4,sgmii";
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+		};
+
+		smi1: mdio@1180000003880 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00003880 0x0 0x40>;
+
+			phy41: ethernet-phy@1 {
+				cavium,qlm-trim = "0,sgmii";
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy42: ethernet-phy@2 {
+				cavium,qlm-trim = "0,sgmii";
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy43: ethernet-phy@3 {
+				cavium,qlm-trim = "0,sgmii";
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy44: ethernet-phy@4 {
+				cavium,qlm-trim = "0,sgmii";
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+		};
+
+		smi2: mdio@1180000003900 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00003900 0x0 0x40>;
+
+			phy21: ethernet-phy@1 {
+				cavium,qlm-trim = "2,sgmii";
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy22: ethernet-phy@2 {
+				cavium,qlm-trim = "2,sgmii";
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy23: ethernet-phy@3 {
+				cavium,qlm-trim = "2,sgmii";
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy24: ethernet-phy@4 {
+				cavium,qlm-trim = "2,sgmii";
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+		};
+
+		smi3: mdio@1180000003980 {
+			compatible = "cavium,octeon-3860-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0x00003980 0x0 0x40>;
+
+			phy11: ethernet-phy@1 {
+				cavium,qlm-trim = "3,sgmii";
+				reg = <1>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy12: ethernet-phy@2 {
+				cavium,qlm-trim = "3,sgmii";
+				reg = <2>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy13: ethernet-phy@3 {
+				cavium,qlm-trim = "3,sgmii";
+				reg = <3>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+			phy14: ethernet-phy@4 {
+				cavium,qlm-trim = "3,sgmii";
+				reg = <4>;
+				compatible = "marvell,88e1149r";
+				marvell,reg-init = <3 0x10 0 0x5777>,
+					<3 0x11 0 0x00aa>,
+					<3 0x12 0 0x4105>,
+					<3 0x13 0 0x0a60>;
+			};
+		};
+
+		mix0: ethernet@1070000100000 {
+			compatible = "cavium,octeon-5750-mix";
+			reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+			      <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
+			      <0x11800 0xE0002000 0x0 0x8>;   /* AGL_PRT_CTL */
+			cell-index = <0>;
+			interrupts = <6 40>, <6 32>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			phy-handle = <&phy0>;
+		};
+
+		pip: pip@11800a0000000 {
+			compatible = "cavium,octeon-3860-pip";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+			interface@4 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x4>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy1>;
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy2>;
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy3>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy4>;
+				};
+			};
+
+			interface@3 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x3>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy11>;
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy12>;
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy13>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy14>;
+				};
+			};
+
+			interface@2 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x2>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy21>;
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy22>;
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy23>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy24>;
+				};
+			};
+
+			interface@1 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+				};
+			};
+
+			interface@0 {
+				compatible = "cavium,octeon-3860-pip-interface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>; /* interface */
+
+				ethernet@0 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x0>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy41>;
+				};
+				ethernet@1 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x1>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy42>;
+				};
+				ethernet@2 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x2>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy43>;
+				};
+				ethernet@3 {
+					compatible = "cavium,octeon-3860-pip-port";
+					reg = <0x3>; /* Port */
+					local-mac-address = [ 00 00 00 00 00 00 ];
+					phy-handle = <&phy44>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cavium,octeon-3860-twsi";
+			reg = <0x11800 0x00001000 0x0 0x200>;
+			interrupts = <3 32>;
+			clock-frequency = <100000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+			tmp@4c {
+				compatible = "ti,tmp421";
+				reg = <0x4c>;
+			};
+		};
+
+		twsi1: i2c@1180000001200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cavium,octeon-3860-twsi";
+			reg = <0x11800 0x00001200 0x0 0x200>;
+			interrupts = <3 33>;
+			clock-frequency = <100000>;
+		};
+
+		uart0: serial@1180000000800 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000800 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <3 36>;
+		};
+
+		uart1: serial@1180000000c00 {
+			compatible = "cavium,octeon-3860-uart","ns16550";
+			reg = <0x11800 0x00000c00 0x0 0x400>;
+			clock-frequency = <0>;
+			current-speed = <115200>;
+			reg-shift = <3>;
+			interrupts = <3 37>;
+		};
+
+		bootbus: bootbus@1180000000000 {
+			compatible = "cavium,octeon-3860-bootbus";
+			reg = <0x11800 0x00000000 0x0 0x200>;
+			/* The chip select number and offset */
+			#address-cells = <2>;
+			/* The size of the chip select region */
+			#size-cells = <1>;
+			ranges = <0 0  0       0x1f400000  0xc00000>,
+				 <1 0  0x10000 0x30000000  0>,
+				 <2 0  0x10000 0x40000000  0>,
+				 <3 0  0x10000 0x50000000  0>,
+				 <4 0  0       0x1d020000  0x10000>,
+				 <5 0  0       0x1d040000  0x10000>,
+				 <6 0  0       0x1d050000  0x10000>,
+				 <7 0  0x10000 0x90000000  0>;
+
+			cavium,cs-config@0 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <0>;
+				cavium,t-adr  = <10>;
+				cavium,t-ce   = <50>;
+				cavium,t-oe   = <50>;
+				cavium,t-we   = <35>;
+				cavium,t-rd-hld = <25>;
+				cavium,t-wr-hld = <35>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <25>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@4 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <4>;
+				cavium,t-adr  = <320>;
+				cavium,t-ce   = <320>;
+				cavium,t-oe   = <320>;
+				cavium,t-we   = <320>;
+				cavium,t-rd-hld = <320>;
+				cavium,t-wr-hld = <320>;
+				cavium,t-pause	= <320>;
+				cavium,t-wait	= <320>;
+				cavium,t-page	= <320>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <8>;
+			};
+			cavium,cs-config@5 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <5>;
+				cavium,t-adr  = <0>;
+				cavium,t-ce   = <300>;
+				cavium,t-oe   = <125>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <300>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <300>;
+				cavium,t-page	= <310>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,bus-width = <16>;
+			};
+			cavium,cs-config@6 {
+				compatible = "cavium,octeon-3860-bootbus-config";
+				cavium,cs-index = <6>;
+				cavium,t-adr  = <0>;
+				cavium,t-ce   = <30>;
+				cavium,t-oe   = <125>;
+				cavium,t-we   = <150>;
+				cavium,t-rd-hld = <100>;
+				cavium,t-wr-hld = <30>;
+				cavium,t-pause	= <0>;
+				cavium,t-wait	= <30>;
+				cavium,t-page	= <310>;
+				cavium,t-rd-dly = <0>;
+
+				cavium,pages	 = <0>;
+				cavium,wait-mode;
+				cavium,bus-width = <16>;
+			};
+
+			flash0: nor@0,0 {
+				compatible = "cfi-flash";
+				reg = <0 0 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0 0x200000>;
+					read-only;
+				};
+				partition@200000 {
+					label = "kernel";
+					reg = <0x200000 0x200000>;
+				};
+				partition@400000 {
+					label = "cramfs";
+					reg = <0x400000 0x3fe000>;
+				};
+				partition@7fe000 {
+					label = "environment";
+					reg = <0x7fe000 0x2000>;
+					read-only;
+				};
+			};
+
+			led0: led-display@4,0 {
+				compatible = "avago,hdsp-253x";
+				reg = <4 0x20 0x20>, <4 0 0x20>;
+			};
+
+			compact-flash@5,0 {
+				compatible = "cavium,ebt3000-compact-flash";
+				reg = <5 0 0x10000>, <6 0 0x10000>;
+				cavium,bus-width = <16>;
+				cavium,true-ide;
+				cavium,dma-engine-handle = <&dma0>;
+			};
+		};
+
+		dma0: dma-engine@1180000000100 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000100 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+		dma1: dma-engine@1180000000108 {
+			compatible = "cavium,octeon-5750-bootbus-dma";
+			reg = <0x11800 0x00000108 0x0 0x8>;
+			interrupts = <0 63>;
+		};
+
+		uctl: uctl@118006f000000 {
+			compatible = "cavium,octeon-6335-uctl";
+			reg = <0x11800 0x6f000000 0x0 0x100>;
+			ranges; /* Direct mapping */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			/* 12MHz, 24MHz and 48MHz allowed */
+			refclk-frequency = <12000000>;
+			/* Either "crystal" or "external" */
+			refclk-type = "crystal";
+
+			ehci@16f0000000000 {
+				compatible = "cavium,octeon-6335-ehci","usb-ehci";
+				reg = <0x16f00 0x00000000 0x0 0x100>;
+				interrupts = <3 44>;
+				big-endian-regs;
+			};
+			ohci@16f0000000400 {
+				compatible = "cavium,octeon-6335-ohci","usb-ohci";
+				reg = <0x16f00 0x00000400 0x0 0x100>;
+				interrupts = <3 44>;
+				big-endian-regs;
+			};
+		};
+	};
+
+	aliases {
+		mix0 = &mix0;
+		pip = &pip;
+		smi0 = &smi0;
+		smi1 = &smi1;
+		smi2 = &smi2;
+		smi3 = &smi3;
+		twsi0 = &twsi0;
+		twsi1 = &twsi1;
+		uart0 = &uart0;
+		uart1 = &uart1;
+		uctl = &uctl;
+		led0 = &led0;
+		flash0 = &flash0;
+	};
+ };
diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
new file mode 100644
index 000000000..cb219b730
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for EdgeRouter Lite.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	model = "ubnt,e100";
+
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy5: ethernet-phy@5 {
+				reg = <5>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+			phy6: ethernet-phy@6 {
+				reg = <6>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+			phy7: ethernet-phy@7 {
+				reg = <7>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					phy-handle = <&phy7>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
+				};
+				ethernet@1 {
+					phy-handle = <&phy6>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
+				};
+				ethernet@2 {
+					phy-handle = <&phy5>;
+					rx-delay = <0>;
+					tx-delay = <0x10>;
+				};
+			};
+		};
+
+		uart0: serial@1180000000800 {
+			clock-frequency = <500000000>;
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 000000000..441a3c16e
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= boston.dtb
+
+dtb-$(CONFIG_MACH_PISTACHIO)	+= pistachio_marduk.dtb
+obj-$(CONFIG_MACH_PISTACHIO)	+= pistachio_marduk.dtb.o
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 000000000..84328afa3
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,boston";
+
+	chosen {
+		stdout-path = "uart0:115200";
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "img,mips";
+			reg = <0>;
+			clocks = <&clk_boston BOSTON_CLK_CPU>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	pci0: pci@10000000 {
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		device_type = "pci";
+		reg = <0x10000000 0x2000000>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+		ranges = <0x02000000 0 0x40000000
+			  0x40000000 0 0x40000000>;
+
+		bus-range = <0x00 0xff>;
+
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pci0_intc 1>,
+				<0 0 0 2 &pci0_intc 2>,
+				<0 0 0 3 &pci0_intc 3>,
+				<0 0 0 4 &pci0_intc 4>;
+
+		pci0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pci1: pci@12000000 {
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		device_type = "pci";
+		reg = <0x12000000 0x2000000>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+		ranges = <0x02000000 0 0x20000000
+			  0x20000000 0 0x20000000>;
+
+		bus-range = <0x00 0xff>;
+
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pci1_intc 1>,
+				<0 0 0 2 &pci1_intc 2>,
+				<0 0 0 3 &pci1_intc 3>,
+				<0 0 0 4 &pci1_intc 4>;
+
+		pci1_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pci2: pci@14000000 {
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		device_type = "pci";
+		reg = <0x14000000 0x2000000>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ranges = <0x02000000 0 0x16000000
+			  0x16000000 0 0x100000>;
+
+		bus-range = <0x00 0xff>;
+
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pci2_intc 1>,
+				<0 0 0 2 &pci2_intc 2>,
+				<0 0 0 3 &pci2_intc 3>,
+				<0 0 0 4 &pci2_intc 4>;
+
+		pci2_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		pci2_root@0,0,0 {
+			compatible = "pci10ee,7021";
+			reg = <0x00000000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			eg20t_bridge@1,0,0 {
+				compatible = "pci8086,8800";
+				reg = <0x00010000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+
+				eg20t_phub@2,0,0 {
+					compatible = "pci8086,8801";
+					reg = <0x00020000 0 0 0 0>;
+					intel,eg20t-prefetch = <0>;
+				};
+
+				eg20t_mac@2,0,1 {
+					compatible = "pci8086,8802";
+					reg = <0x00020100 0 0 0 0>;
+					phy-reset-gpios = <&eg20t_gpio 6
+							   GPIO_ACTIVE_LOW>;
+				};
+
+				eg20t_gpio: eg20t_gpio@2,0,2 {
+					compatible = "pci8086,8803";
+					reg = <0x00020200 0 0 0 0>;
+
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				eg20t_i2c@2,12,2 {
+					compatible = "pci8086,8817";
+					reg = <0x00026200 0 0 0 0>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					rtc@68 {
+						compatible = "st,m41t81s";
+						reg = <0x68>;
+					};
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@16120000 {
+		compatible = "mti,gic";
+		reg = <0x16120000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+			clocks = <&clk_boston BOSTON_CLK_CPU>;
+		};
+	};
+
+	cdmm@16140000 {
+		compatible = "mti,mips-cdmm";
+		reg = <0x16140000 0x8000>;
+	};
+
+	cpc@16200000 {
+		compatible = "mti,mips-cpc";
+		reg = <0x16200000 0x8000>;
+	};
+
+	plat_regs: system-controller@17ffd000 {
+		compatible = "img,boston-platform-regs", "syscon";
+		reg = <0x17ffd000 0x1000>;
+
+		clk_boston: clock {
+			compatible = "img,boston-clock";
+			#clock-cells = <1>;
+		};
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&plat_regs>;
+		offset = <0x10>;
+		mask = <0x10>;
+	};
+
+	uart0: uart@17ffe000 {
+		compatible = "ns16550a";
+		reg = <0x17ffe000 0x1000>;
+		reg-shift = <2>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clk_boston BOSTON_CLK_SYS>;
+	};
+
+	lcd: lcd@17fff000 {
+		compatible = "img,boston-lcd";
+		reg = <0x17fff000 0x8>;
+	};
+};
diff --git a/arch/mips/boot/dts/img/pistachio.dtsi b/arch/mips/boot/dts/img/pistachio.dtsi
new file mode 100644
index 000000000..dc3b7909d
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio.dtsi
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ * Copyright (C) 2015 Google, Inc.
+ */
+
+#include <dt-bindings/clock/pistachio-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/reset/pistachio-resets.h>
+
+/ {
+	compatible = "img,pistachio";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,interaptiv";
+			reg = <0>;
+			clocks = <&clk_core CLK_MIPS_PLL>;
+			clock-names = "cpu";
+			clock-latency = <1000>;
+			operating-points = <
+				/* kHz    uV(dummy) */
+				546000 1150000
+				520000 1100000
+				494000 1000000
+				468000 950000
+				442000 900000
+				416000 800000
+			>;
+		};
+	};
+
+	i2c0: i2c@18100000 {
+		compatible = "img,scb-i2c";
+		reg = <0x18100000 0x200>;
+		interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_I2C0>,
+			 <&cr_periph SYS_CLK_I2C0>;
+		clock-names = "scb", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_I2C0_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_I2C0_DIV>;
+		assigned-clock-rates = <100000000>, <33333334>;
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c1: i2c@18100200 {
+		compatible = "img,scb-i2c";
+		reg = <0x18100200 0x200>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_I2C1>,
+			 <&cr_periph SYS_CLK_I2C1>;
+		clock-names = "scb", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_I2C1_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_I2C1_DIV>;
+		assigned-clock-rates = <100000000>, <33333334>;
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c2: i2c@18100400 {
+		compatible = "img,scb-i2c";
+		reg = <0x18100400 0x200>;
+		interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_I2C2>,
+			 <&cr_periph SYS_CLK_I2C2>;
+		clock-names = "scb", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_I2C2_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_I2C2_DIV>;
+		assigned-clock-rates = <100000000>, <33333334>;
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c3: i2c@18100600 {
+		compatible = "img,scb-i2c";
+		reg = <0x18100600 0x200>;
+		interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_I2C3>,
+			 <&cr_periph SYS_CLK_I2C3>;
+		clock-names = "scb", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_I2C3_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_I2C3_DIV>;
+		assigned-clock-rates = <100000000>, <33333334>;
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2s_in: i2s-in@18100800 {
+		compatible = "img,i2s-in";
+		reg = <0x18100800 0x200>;
+		interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 30 0xffffffff 0>;
+		dma-names = "rx";
+		clocks = <&cr_periph SYS_CLK_I2S_IN>;
+		clock-names = "sys";
+		img,i2s-channels = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_in_pins>;
+		status = "disabled";
+
+		#sound-dai-cells = <0>;
+	};
+
+	i2s_out: i2s-out@18100a00 {
+		compatible = "img,i2s-out";
+		reg = <0x18100a00 0x200>;
+		interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 23 0xffffffff 0>;
+		dma-names = "tx";
+		clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+			 <&clk_core CLK_I2S>;
+		clock-names = "sys", "ref";
+		assigned-clocks = <&clk_core CLK_I2S_DIV>;
+		assigned-clock-rates = <12288000>;
+		img,i2s-channels = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_out_pins>;
+		status = "disabled";
+		resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+		reset-names = "rst";
+		#sound-dai-cells = <0>;
+	};
+
+	parallel_out: parallel-audio-out@18100c00 {
+		compatible = "img,parallel-out";
+		reg = <0x18100c00 0x100>;
+		interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 16 0xffffffff 0>;
+		dma-names = "tx";
+		clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+			 <&clk_core CLK_AUDIO_DAC>;
+		clock-names = "sys", "ref";
+		assigned-clocks = <&clk_core CLK_AUDIO_DAC_DIV>;
+		assigned-clock-rates = <12288000>;
+		status = "disabled";
+		resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+		reset-names = "rst";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_out: spdif-out@18100d00 {
+		compatible = "img,spdif-out";
+		reg = <0x18100d00 0x100>;
+		interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 14 0xffffffff 0>;
+		dma-names = "tx";
+		clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+			 <&clk_core CLK_SPDIF>;
+		clock-names = "sys", "ref";
+		assigned-clocks = <&clk_core CLK_SPDIF_DIV>;
+		assigned-clock-rates = <12288000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_out_pin>;
+		status = "disabled";
+		resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+		reset-names = "rst";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_in: spdif-in@18100e00 {
+		compatible = "img,spdif-in";
+		reg = <0x18100e00 0x100>;
+		interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 15 0xffffffff 0>;
+		dma-names = "rx";
+		clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+		clock-names = "sys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_in_pin>;
+		status = "disabled";
+
+		#sound-dai-cells = <0>;
+	};
+
+	internal_dac: internal-dac {
+		compatible = "img,pistachio-internal-dac";
+		img,cr-top = <&cr_top>;
+		img,voltage-select = <1>;
+
+		#sound-dai-cells = <0>;
+	};
+
+	spfi0: spi@18100f00 {
+		compatible = "img,spfi";
+		reg = <0x18100f00 0x100>;
+		interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_core CLK_SPI0>, <&cr_periph SYS_CLK_SPI0_MASTER>;
+		clock-names = "sys", "spfi";
+		dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+		dma-names = "rx", "tx";
+		spfi-max-frequency = <50000000>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spfi1: spi@18101000 {
+		compatible = "img,spfi";
+		reg = <0x18101000 0x100>;
+		interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_core CLK_SPI1>, <&cr_periph SYS_CLK_SPI1>;
+		clock-names = "sys", "spfi";
+		dmas = <&mdc 1 0xffffffff 0>, <&mdc 2 0xffffffff 0>;
+		dma-names = "rx", "tx";
+		img,supports-quad-mode;
+		spfi-max-frequency = <50000000>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pwm: pwm@18101300 {
+		compatible = "img,pistachio-pwm";
+		reg = <0x18101300 0x100>;
+		clocks = <&clk_periph PERIPH_CLK_PWM>,
+			 <&cr_periph SYS_CLK_PWM>;
+		clock-names = "pwm", "sys";
+		img,cr-periph = <&cr_periph>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	uart0: uart@18101400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18101400 0x100>;
+		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_core CLK_UART0>, <&cr_periph SYS_CLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		assigned-clocks = <&clk_core CLK_UART0_INTERNAL_DIV>,
+				  <&clk_core CLK_UART0_DIV>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-0 = <&uart0_pins>, <&uart0_rts_cts_pins>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	uart1: uart@18101500 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18101500 0x100>;
+		interrupts = <GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_core CLK_UART1>, <&cr_periph SYS_CLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		assigned-clocks = <&clk_core CLK_UART1_INTERNAL_DIV>,
+				  <&clk_core CLK_UART1_DIV>;
+		assigned-clock-rates = <114278400>, <1843200>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-0 = <&uart1_pins>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	adc: adc@18101600 {
+		compatible = "cosmic,10001-adc";
+		reg = <0x18101600 0x24>;
+		adc-reserved-channels = <0x30>;
+		clocks = <&clk_core CLK_AUX_ADC>;
+		clock-names = "adc";
+		assigned-clocks = <&clk_core CLK_AUX_ADC_INTERNAL_DIV>,
+				  <&clk_core CLK_AUX_ADC_DIV>;
+		assigned-clock-rates = <100000000>, <1000000>;
+		status = "disabled";
+
+		#io-channel-cells = <1>;
+	};
+
+	pinctrl: pinctrl@18101c00 {
+		compatible = "img,pistachio-system-pinctrl";
+		reg = <0x18101c00 0x400>;
+
+		gpio0: gpio0 {
+			interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1 {
+			interrupts = <GIC_SHARED 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 16 16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2 {
+			interrupts = <GIC_SHARED 73 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 32 16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3 {
+			interrupts = <GIC_SHARED 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 48 16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4 {
+			interrupts = <GIC_SHARED 75 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 64 16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio5 {
+			interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 80 10>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0_pins: i2c0-pins {
+			pin_i2c0: i2c0 {
+				pins = "mfio28", "mfio29";
+				function = "i2c0";
+				drive-strength = <4>;
+			};
+		};
+
+		i2c1_pins: i2c1-pins {
+			pin_i2c1: i2c1 {
+				pins = "mfio30", "mfio31";
+				function = "i2c1";
+				drive-strength = <4>;
+			};
+		};
+
+		i2c2_pins: i2c2-pins {
+			pin_i2c2: i2c2 {
+				pins = "mfio32", "mfio33";
+				function = "i2c2";
+				drive-strength = <4>;
+			};
+		};
+
+		i2c3_pins: i2c3-pins {
+			pin_i2c3: i2c3 {
+				pins = "mfio34", "mfio35";
+				function = "i2c3";
+				drive-strength = <4>;
+			};
+		};
+
+		spim0_pins: spim0-pins {
+			pin_spim0: spim0 {
+				pins = "mfio9", "mfio10";
+				function = "spim0";
+				drive-strength = <4>;
+			};
+			spim0_clk: spim0-clk {
+				pins = "mfio8";
+				function = "spim0";
+				drive-strength = <4>;
+			};
+		};
+
+		spim0_cs0_alt_pin: spim0-cs0-alt-pin {
+			spim0-cs0 {
+				pins = "mfio2";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs1_pin: spim0-cs1-pin {
+			spim0-cs1 {
+				pins = "mfio1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs2_pin: spim0-cs2-pin {
+			spim0-cs2 {
+				pins = "mfio55";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs2_alt_pin: spim0-cs2-alt-pin {
+			spim0-cs2 {
+				pins = "mfio28";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs3_pin: spim0-cs3-pin {
+			spim0-cs3 {
+				pins = "mfio56";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs3_alt_pin: spim0-cs3-alt-pin {
+			spim0-cs3 {
+				pins = "mfio29";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs4_pin: spim0-cs4-pin {
+			spim0-cs4 {
+				pins = "mfio57";
+				drive-strength = <2>;
+			};
+		};
+
+		spim0_cs4_alt_pin: spim0-cs4-alt-pin {
+			spim0-cs4 {
+				pins = "mfio30";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_pins: spim1-pins {
+			spim1 {
+				pins = "mfio3", "mfio4", "mfio5";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_quad_pins: spim1-quad-pins {
+			spim1-quad {
+				pins = "mfio6", "mfio7";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs0_pin: spim1-cs0-pins {
+			spim1-cs0 {
+				pins = "mfio0";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs1_pin: spim1-cs1-pin {
+			spim1-cs1 {
+				pins = "mfio1";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs1_alt_pin: spim1-cs1-alt-pin {
+			spim1-cs1 {
+				pins = "mfio58";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs2_pin: spim1-cs2-pin {
+			spim1-cs2 {
+				pins = "mfio2";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs2_alt0_pin: spim1-cs2-alt0-pin {
+			spim1-cs2 {
+				pins = "mfio31";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs2_alt1_pin: spim1-cs2-alt1-pin {
+			spim1-cs2 {
+				pins = "mfio55";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs3_pin: spim1-cs3-pin {
+			spim1-cs3 {
+				pins = "mfio56";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		spim1_cs4_pin: spim1-cs4-pin {
+			spim1-cs4 {
+				pins = "mfio57";
+				function = "spim1";
+				drive-strength = <2>;
+			};
+		};
+
+		uart0_pins: uart0-pins {
+			uart0 {
+				pins = "mfio55", "mfio56";
+				function = "uart0";
+				drive-strength = <2>;
+			};
+		};
+
+		uart0_rts_cts_pins: uart0-rts-cts-pins {
+			uart0-rts-cts {
+				pins = "mfio57", "mfio58";
+				function = "uart0";
+				drive-strength = <2>;
+			};
+		};
+
+		uart1_pins: uart1-pins {
+			uart1 {
+				pins = "mfio59", "mfio60";
+				function = "uart1";
+				drive-strength = <2>;
+			};
+		};
+
+		uart1_rts_cts_pins: uart1-rts-cts-pins {
+			uart1-rts-cts {
+				  pins = "mfio1", "mfio2";
+				  function = "uart1";
+				  drive-strength = <2>;
+			};
+		};
+
+		enet_pins: enet-pins {
+			pin_enet: enet {
+				pins = "mfio63", "mfio64", "mfio65", "mfio66",
+				       "mfio67", "mfio68", "mfio69", "mfio70";
+				function = "eth";
+				slew-rate = <1>;
+				drive-strength = <4>;
+			};
+			pin_enet_phy_clk: enet-phy-clk {
+				pins = "mfio71";
+				function = "eth";
+				slew-rate = <1>;
+				drive-strength = <8>;
+			};
+		};
+
+		sdhost_pins: sdhost-pins {
+			pin_sdhost_clk: sdhost-clk {
+				pins = "mfio15";
+				function = "sdhost";
+				slew-rate = <1>;
+				drive-strength = <4>;
+			};
+			pin_sdhost_cmd: sdhost-cmd {
+				pins = "mfio16";
+				function = "sdhost";
+				slew-rate = <1>;
+				drive-strength = <4>;
+			};
+			pin_sdhost_data: sdhost-data {
+				pins = "mfio17", "mfio18", "mfio19", "mfio20",
+				       "mfio21", "mfio22", "mfio23", "mfio24";
+				function = "sdhost";
+				slew-rate = <1>;
+				drive-strength = <4>;
+			};
+			pin_sdhost_power_select: sdhost-power-select {
+				pins = "mfio25";
+				function = "sdhost";
+				slew-rate = <1>;
+				drive-strength = <2>;
+			};
+			pin_sdhost_card_detect: sdhost-card-detect {
+				pins = "mfio26";
+				function = "sdhost";
+				drive-strength = <2>;
+			};
+			pin_sdhost_write_protect: sdhost-write-protect {
+				pins = "mfio27";
+				function = "sdhost";
+				drive-strength = <2>;
+			};
+		};
+
+		ir_pin: ir-pin {
+			ir-data {
+				pins = "mfio72";
+				function = "ir";
+				drive-strength = <2>;
+			};
+		};
+
+		pwmpdm0_pin: pwmpdm0-pin {
+			pwmpdm0 {
+				pins = "mfio73";
+				function = "pwmpdm";
+				drive-strength = <2>;
+			};
+		};
+
+		pwmpdm1_pin: pwmpdm1-pin {
+			pwmpdm1 {
+				pins = "mfio74";
+				function = "pwmpdm";
+				drive-strength = <2>;
+			};
+		};
+
+		pwmpdm2_pin: pwmpdm2-pin {
+			pwmpdm2 {
+				pins = "mfio75";
+				function = "pwmpdm";
+				drive-strength = <2>;
+			};
+		};
+
+		pwmpdm3_pin: pwmpdm3-pin {
+			pwmpdm3 {
+				pins = "mfio76";
+				function = "pwmpdm";
+				drive-strength = <2>;
+			};
+		};
+
+		dac_clk_pin: dac-clk-pin {
+			pin_dac_clk: dac-clk {
+				pins = "mfio45";
+				function = "i2s_dac_clk";
+				drive-strength = <4>;
+			};
+		};
+
+		i2s_mclk_pin: i2s-mclk-pin {
+			pin_i2s_mclk: i2s-mclk {
+				pins = "mfio36";
+				function = "i2s_out";
+				drive-strength = <4>;
+			};
+		};
+
+		spdif_out_pin: spdif-out-pin {
+			spdif-out {
+				pins = "mfio61";
+				function = "spdif_out";
+				slew-rate = <1>;
+				drive-strength = <2>;
+			};
+		};
+
+		spdif_in_pin: spdif-in-pin {
+			spdif-in {
+				pins = "mfio62";
+				function = "spdif_in";
+				drive-strength = <2>;
+			};
+		};
+
+		i2s_out_pins: i2s-out-pins {
+			pins_i2s_out_clk: i2s-out-clk {
+				pins = "mfio37", "mfio38";
+				function = "i2s_out";
+				drive-strength = <4>;
+			};
+			pins_i2s_out: i2s-out {
+				pins = "mfio39", "mfio40",
+				       "mfio41", "mfio42",
+				       "mfio43", "mfio44";
+				function = "i2s_out";
+				drive-strength = <2>;
+			};
+		};
+
+		i2s_in_pins: i2s-in-pins {
+			i2s-in {
+				pins = "mfio47", "mfio48", "mfio49",
+				       "mfio50", "mfio51", "mfio52",
+				       "mfio53", "mfio54";
+				function = "i2s_in";
+				drive-strength = <2>;
+			};
+		};
+	};
+
+	timer: timer@18102000 {
+		compatible = "img,pistachio-gptimer";
+		reg = <0x18102000 0x100>;
+		interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+			 <&cr_periph SYS_CLK_TIMER>;
+		clock-names = "fast", "sys";
+		img,cr-periph = <&cr_periph>;
+	};
+
+	wdt: watchdog@18102100 {
+		compatible = "img,pdc-wdt";
+		reg = <0x18102100 0x100>;
+		interrupts = <GIC_SHARED 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_WD>, <&cr_periph SYS_CLK_WD>;
+		clock-names = "wdt", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_WD_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_WD_DIV>;
+		assigned-clock-rates = <4000000>, <32768>;
+	};
+
+	ir: ir@18102200 {
+		compatible = "img,ir-rev1";
+		reg = <0x18102200 0x100>;
+		interrupts = <GIC_SHARED 51 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_periph PERIPH_CLK_IR>, <&cr_periph SYS_CLK_IR>;
+		clock-names = "core", "sys";
+		assigned-clocks = <&clk_periph PERIPH_CLK_IR_PRE_DIV>,
+				  <&clk_periph PERIPH_CLK_IR_DIV>;
+		assigned-clock-rates = <4000000>, <32768>;
+		pinctrl-0 = <&ir_pin>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	usb: usb@18120000 {
+		compatible = "snps,dwc2";
+		reg = <0x18120000 0x1c000>;
+		interrupts = <GIC_SHARED 49 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usb_phy>;
+		phy-names = "usb2-phy";
+		g-tx-fifo-size = <256 256 256 256>;
+		status = "disabled";
+	};
+
+	enet: ethernet@18140000 {
+		compatible = "snps,dwmac";
+		reg = <0x18140000 0x2000>;
+		interrupts = <GIC_SHARED 50 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&clk_core CLK_ENET>, <&cr_periph SYS_CLK_ENET>;
+		clock-names = "stmmaceth", "pclk";
+		assigned-clocks = <&clk_core CLK_ENET_MUX>,
+				  <&clk_core CLK_ENET_DIV>;
+		assigned-clock-parents = <&clk_core CLK_SYS_INTERNAL_DIV>;
+		assigned-clock-rates = <0>, <50000000>;
+		pinctrl-0 = <&enet_pins>;
+		pinctrl-names = "default";
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
+	sdhost: mmc@18142000 {
+		compatible = "img,pistachio-dw-mshc";
+		reg = <0x18142000 0x400>;
+		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk_core CLK_SD_HOST>, <&cr_periph SYS_CLK_SD_HOST>;
+		clock-names = "ciu", "biu";
+		pinctrl-0 = <&sdhost_pins>;
+		pinctrl-names = "default";
+		fifo-depth = <0x20>;
+		clock-frequency = <50000000>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sram: sram@1b000000 {
+		compatible = "mmio-sram";
+		reg = <0x1b000000 0x10000>;
+	};
+
+	mdc: dma-controller@18143000 {
+		compatible = "img,pistachio-mdc-dma";
+		reg = <0x18143000 0x1000>;
+		interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cr_periph SYS_CLK_MDC>;
+		clock-names = "sys";
+
+		img,max-burst-multiplier = <16>;
+		img,cr-periph = <&cr_periph>;
+
+		#dma-cells = <3>;
+	};
+
+	clk_core: clk@18144000 {
+		compatible = "img,pistachio-clk", "syscon";
+		clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+			 <&cr_top EXT_CLK_ENET_IN>;
+		clock-names = "xtal", "audio_refclk_ext_gate",
+			      "ext_enet_in_gate";
+		reg = <0x18144000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	clk_periph: clk@18144800 {
+		compatible = "img,pistachio-clk-periph";
+		reg = <0x18144800 0x1000>;
+		clocks = <&clk_core CLK_PERIPH_SYS>;
+		clock-names = "periph_sys_core";
+		#clock-cells = <1>;
+	};
+
+	cr_periph: clk@18148000 {
+		compatible = "img,pistachio-cr-periph", "syscon", "simple-bus";
+		reg = <0x18148000 0x1000>;
+		clocks = <&clk_periph PERIPH_CLK_SYS>;
+		clock-names = "sys";
+		#clock-cells = <1>;
+
+		pistachio_reset: reset-controller {
+			compatible = "img,pistachio-reset";
+			#reset-cells = <1>;
+		};
+	};
+
+	cr_top: clk@18149000 {
+		compatible = "img,pistachio-cr-top", "syscon";
+		reg = <0x18149000 0x200>;
+		#clock-cells = <1>;
+	};
+
+	hash: hash@18149600 {
+		compatible = "img,hash-accelerator";
+		reg = <0x18149600 0x100>, <0x18101100 0x4>;
+		interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+		dmas = <&mdc 8 0xffffffff 0>;
+		dma-names = "tx";
+		clocks = <&cr_periph SYS_CLK_HASH>,
+			 <&clk_periph PERIPH_CLK_ROM>;
+		clock-names = "sys", "hash";
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+			clocks = <&clk_core CLK_MIPS>;
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "img,pistachio-usb-phy";
+		clocks = <&clk_core CLK_USB_PHY>;
+		clock-names = "usb_phy";
+		assigned-clocks = <&clk_core CLK_USB_PHY_DIV>;
+		assigned-clock-rates = <50000000>;
+		img,refclk = <0x2>;
+		img,cr-top = <&cr_top>;
+		#phy-cells = <0>;
+	};
+
+	xtal: xtal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <52000000>;
+		clock-output-names = "xtal";
+	};
+};
diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
new file mode 100644
index 000000000..bf69da96d
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ *
+ * IMG Marduk board is also known as Creator Ci40.
+ */
+
+/dts-v1/;
+
+#include "pistachio.dtsi"
+
+/ {
+	model = "IMG Marduk (Creator Ci40)";
+	compatible = "img,pistachio-marduk", "img,pistachio";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &enet;
+		spi0 = &spfi0;
+		spi1 = &spfi1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
+		stdout-path = "serial1:115200";
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x10000000>;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "aux_adc_vref";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
+	internal_dac_supply: internal-dac-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "internal_dac_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	leds {
+		compatible = "pwm-leds";
+		heartbeat {
+			label = "marduk:red:heartbeat";
+			pwms = <&pwm 3 300000>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "Button 1";
+			linux,code = <0x101>; /* BTN_1 */
+			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Button 2";
+			linux,code = <0x102>; /* BTN_2 */
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&internal_dac {
+	VDD-supply = <&internal_dac_supply>;
+};
+
+&spfi1 {
+	status = "okay";
+
+	pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+		    <&spim1_cs1_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "spansion,s25fl016k", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	assigned-clock-rates = <114278400>, <1843200>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&enet {
+	status = "okay";
+};
+
+&pin_enet {
+	drive-strength = <2>;
+};
+
+&pin_enet_phy_clk {
+	drive-strength = <2>;
+};
+
+&sdhost {
+	status = "okay";
+	bus-width = <4>;
+	disable-wp;
+};
+
+&pin_sdhost_cmd {
+	drive-strength = <2>;
+};
+
+&pin_sdhost_data {
+	drive-strength = <2>;
+};
+
+&pwm {
+	status = "okay";
+
+	pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
+		    <&pwmpdm3_pin>;
+	pinctrl-names = "default";
+};
+
+&adc {
+	status = "okay";
+	vref-supply = <&reg_1v8>;
+	adc-reserved-channels = <0x10>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
new file mode 100644
index 000000000..54aa0c4e6
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
+dtb-$(CONFIG_JZ4740_RS90)	+= rs90.dtb
+dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
+dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
+dtb-$(CONFIG_X1000_CU1000_NEO)	+= cu1000-neo.dtb
+dtb-$(CONFIG_X1830_CU1830_NEO)	+= cu1830-neo.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
new file mode 100644
index 000000000..75f5bfbf2
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+/ {
+	compatible = "img,ci20", "ingenic,jz4780";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000
+		       0x30000000 0x30000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		sw1 {
+			label = "ci20:sw1";
+			linux,code = <KEY_F13>;
+			gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ci20:red:led0";
+			gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		led1 {
+			label = "ci20:red:led1";
+			gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		led2 {
+			label = "ci20:red:led2";
+			gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led3 {
+			label = "ci20:red:led3";
+			gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+	};
+
+	eth0_power: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "eth0_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	ir: ir {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+	};
+
+	wlan0_power: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan0_power";
+		gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+};
+
+&ext {
+	clock-frequency = <48000000>;
+};
+
+&mmc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc0>;
+
+	cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+
+	brcmf: wifi@1 {
+/*		reg = <4>;*/
+		compatible = "brcm,bcm4330-fmac";
+		vcc-supply = <&wlan0_power>;
+		device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&wlan0_power>;
+		device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart3>;
+};
+
+&uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart4>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	clock-frequency = <400000>;
+
+	act8600: act8600@5a {
+		compatible = "active-semi,act8600";
+		reg = <0x5a>;
+		status = "okay";
+
+		regulators {
+			vddcore: SUDCDC1 {
+				regulator-name = "DCDC_REG1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+			vddmem: SUDCDC2 {
+				regulator-name = "DCDC_REG2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+			vcc_33: SUDCDC3 {
+				regulator-name = "DCDC_REG3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vcc_50: SUDCDC4 {
+				regulator-name = "SUDCDC_REG4";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+			};
+			vcc_25: LDO_REG5 {
+				regulator-name = "LDO_REG5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			wifi_io: LDO_REG6 {
+				regulator-name = "LDO_REG6";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			vcc_28: LDO_REG7 {
+				regulator-name = "LDO_REG7";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+			vcc_15: LDO_REG8 {
+				regulator-name = "LDO_REG8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+			vrtc_18: LDO_REG9 {
+				regulator-name = "LDO_REG9";
+				/* Despite the datasheet stating 3.3V
+				 * for REG9 and the driver expecting that,
+				 * REG9 outputs 1.8V.
+				 * Likely the CI20 uses a proprietary
+				 * factory programmed chip variant.
+				 * Since this is a simple on/off LDO the
+				 * exact values do not matter.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vcc_11: LDO_REG10 {
+				regulator-name = "LDO_REG10";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c1>;
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c2>;
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c3>;
+
+};
+
+&i2c4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c4>;
+
+	clock-frequency = <400000>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+
+			interrupt-parent = <&gpf>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		};
+};
+
+&nemc {
+	status = "okay";
+
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4780-nand";
+		reg = <1 0 0x1000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		/*
+		 * Only CLE/ALE are needed for the devices that are connected, rather
+		 * than the full address line set.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <1024>;
+			nand-ecc-strength = <24>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_nemc_cs1>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <2>;
+				#size-cells = <2>;
+
+				partition@0 {
+					label = "u-boot-spl";
+					reg = <0x0 0x0 0x0 0x800000>;
+				};
+
+				partition@800000 {
+					label = "u-boot";
+					reg = <0x0 0x800000 0x0 0x200000>;
+				};
+
+				partition@a00000 {
+					label = "u-boot-env";
+					reg = <0x0 0xa00000 0x0 0x200000>;
+				};
+
+				partition@c00000 {
+					label = "boot";
+					reg = <0x0 0xc00000 0x0 0x4000000>;
+				};
+
+				partition@4c00000 {
+					label = "system";
+					reg = <0x0 0x4c00000 0x1 0xfb400000>;
+				};
+			};
+		};
+	};
+
+	dm9000@6 {
+		compatible = "davicom,dm9000";
+		davicom,no-eeprom;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc_cs6>;
+
+		reg = <6 0 1   /* addr */
+		       6 2 1>; /* data */
+
+		ingenic,nemc-tAS = <15>;
+		ingenic,nemc-tAH = <10>;
+		ingenic,nemc-tBP = <20>;
+		ingenic,nemc-tAW = <50>;
+		ingenic,nemc-tSTRV = <100>;
+
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&eth0_power>;
+
+		interrupt-parent = <&gpe>;
+		interrupts = <19 4>;
+
+		nvmem-cells = <&eth0_addr>;
+		nvmem-cell-names = "mac-address";
+	};
+};
+
+&bch {
+	status = "okay";
+};
+
+&pinctrl {
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data", "uart2-hwflow";
+		bias-disable;
+	};
+
+	pins_uart3: uart3 {
+		function = "uart3";
+		groups = "uart3-data", "uart3-hwflow";
+		bias-disable;
+	};
+
+	pins_uart4: uart4 {
+		function = "uart4";
+		groups = "uart4-data";
+		bias-disable;
+	};
+
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-disable;
+	};
+
+	pins_i2c1: i2c1 {
+		function = "i2c1";
+		groups = "i2c1-data";
+		bias-disable;
+	};
+
+	pins_i2c2: i2c2 {
+		function = "i2c2";
+		groups = "i2c2-data";
+		bias-disable;
+	};
+
+	pins_i2c3: i2c3 {
+		function = "i2c3";
+		groups = "i2c3-data";
+		bias-disable;
+	};
+
+	pins_i2c4: i2c4 {
+		function = "i2c4";
+		groups = "i2c4-data-e";
+		bias-disable;
+	};
+
+	pins_nemc: nemc {
+		function = "nemc";
+		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+		bias-disable;
+	};
+
+	pins_nemc_cs1: nemc-cs1 {
+		function = "nemc-cs1";
+		groups = "nemc-cs1";
+		bias-disable;
+	};
+
+	pins_nemc_cs6: nemc-cs6 {
+		function = "nemc-cs6";
+		groups = "nemc-cs6";
+		bias-disable;
+	};
+
+	pins_mmc0: mmc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit-e", "mmc0-4bit-e";
+		bias-disable;
+	};
+
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit-d", "mmc1-4bit-d";
+		bias-disable;
+	};
+};
+
+&tcu {
+	/* 3 MHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <3000000>, <3000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
new file mode 100644
index 000000000..22a1066d6
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "yna,cu1000-neo", "ingenic,x1000e";
+	model = "YSH & ATIL General Board CU1000-Neo";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x04000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	wlan_pwrseq: msc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #0 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	ads7830: adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+};
+
+&msc0 {
+	status = "okay";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc0>;
+
+	non-removable;
+};
+
+&msc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc1>;
+
+	non-removable;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	ap6212a: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		brcm,drive-strength = <10>;
+	};
+};
+
+&mac {
+	status = "okay";
+
+	phy-mode = "rmii";
+	phy-handle = <&lan8720a>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+	status = "okay";
+
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data-d";
+		bias-pull-up;
+	};
+
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-pull-up;
+	};
+
+	pins_msc0: msc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+		bias-disable;
+	};
+
+	pins_msc1: msc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit", "mmc1-4bit";
+		bias-disable;
+	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/cu1830-neo.dts b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
new file mode 100644
index 000000000..640f96c00
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1830.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "yna,cu1830-neo", "ingenic,x1830";
+	model = "YSH & ATIL General Board CU1830-Neo";
+
+	aliases {
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	wlan_pwrseq: msc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #0 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	ads7830: adc@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+};
+
+&msc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc0>;
+
+	non-removable;
+};
+
+&msc1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc1>;
+
+	non-removable;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	ap6212a: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		brcm,drive-strength = <10>;
+	};
+};
+
+&mac {
+	status = "okay";
+
+	phy-mode = "rmii";
+	phy-handle = <&ip101gr>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+	status = "okay";
+
+	ip101gr: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-pull-up;
+	};
+
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-pull-up;
+	};
+
+	pins_msc0: msc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit", "mmc0-4bit";
+		bias-disable;
+	};
+
+	pins_msc1: msc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit", "mmc1-4bit";
+		bias-disable;
+	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
new file mode 100644
index 000000000..bc72304a2
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "gcw,zero", "ingenic,jz4770";
+	model = "GCW Zero";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory: memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000>,
+		      <0x30000000 0x10000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:57600n8";
+	};
+
+	vcc: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmc1_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_vcc";
+		gpio = <&gpe 9 0>;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc>;
+	};
+
+	headphones_amp: analog-amplifier@0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+		enable-delay-ms = <50>;
+
+		VCC-supply = <&ldo5>;
+		sound-name-prefix = "Headphones Amp";
+	};
+
+	speaker_amp: analog-amplifier@1 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+		VCC-supply = <&ldo5>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "gcw0-audio";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Headphone", "Headphones",
+			"Line", "FM Radio",
+			"Microphone", "Built-in Mic";
+		simple-audio-card,routing =
+			"Headphones Amp INL", "LHPOUT",
+			"Headphones Amp INR", "RHPOUT",
+			"Headphones", "Headphones Amp OUTL",
+			"Headphones", "Headphones Amp OUTR",
+			"Speaker Amp INL", "LOUT",
+			"Speaker Amp INR", "ROUT",
+			"Speaker", "Speaker Amp OUTL",
+			"Speaker", "Speaker Amp OUTR",
+			"LLINEIN", "FM Radio",
+			"RLINEIN", "FM Radio",
+			"Built-in Mic", "MICBIAS",
+			"MIC1P", "Built-in Mic",
+			"MIC1N", "Built-in Mic";
+		simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	rumble {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm 4 2000000 0>;
+		pwm-names = "enable";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm4>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000 0>;
+		power-supply = <&vcc>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128
+				     144 160 176 192 208 224 240 255>;
+		default-brightness-level = <12>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		autorepeat;
+
+		button@0 {
+			label = "D-pad up";
+			linux,code = <KEY_UP>;
+			linux,can-disable;
+			gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "D-pad down";
+			linux,code = <KEY_DOWN>;
+			linux,can-disable;
+			gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "D-pad left";
+			linux,code = <KEY_LEFT>;
+			linux,can-disable;
+			gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "D-pad right";
+			linux,code = <KEY_RIGHT>;
+			linux,can-disable;
+			gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+		};
+
+		button@4 {
+			label = "Button A";
+			linux,code = <KEY_LEFTCTRL>;
+			linux,can-disable;
+			gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+		};
+
+		button@5 {
+			label = "Button B";
+			linux,code = <KEY_LEFTALT>;
+			linux,can-disable;
+			gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button@6 {
+			label = "Button Y";
+			linux,code = <KEY_SPACE>;
+			linux,can-disable;
+			gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+		};
+
+		button@7 {
+			label = "Button X";
+			linux,code = <KEY_LEFTSHIFT>;
+			linux,can-disable;
+			gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+		};
+
+		button@8 {
+			label = "Left shoulder button";
+			linux,code = <KEY_TAB>;
+			linux,can-disable;
+			gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button@9 {
+			label = "Right shoulder button";
+			linux,code = <KEY_BACKSPACE>;
+			linux,can-disable;
+			gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+		};
+
+		button@10 {
+			label = "Start button";
+			linux,code = <KEY_ENTER>;
+			linux,can-disable;
+			gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+		};
+
+		button@11 {
+			label = "Select button";
+			linux,code = <KEY_ESC>;
+			linux,can-disable;
+			/*
+			 * This is the only button that is active high,
+			 * since it doubles as BOOT_SEL1.
+			 */
+			gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@12 {
+			label = "Power slider";
+			linux,code = <KEY_POWER>;
+			linux,can-disable;
+			gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button@13 {
+			label = "Power hold";
+			linux,code = <KEY_PAUSE>;
+			linux,can-disable;
+			gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c3: i2c-controller@3 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+		act8600: pmic@5a {
+			compatible = "active-semi,act8600";
+			reg = <0x5a>;
+
+			regulators {
+				/* USB OTG */
+				otg_vbus: SUDCDC_REG4 {
+					/*
+					 * 5.3V instead of 5.0V to compensate
+					 * for the voltage drop of a diode
+					 * between the regulator and the
+					 * connector.
+					 */
+					regulator-min-microvolt = <5300000>;
+					regulator-max-microvolt = <5300000>;
+					inl-supply = <&vcc>;
+				};
+
+				/*
+				 * When this is off, there is no sound, but also
+				 * no USB networking.
+				 */
+				ldo5: LDO5 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					inl-supply = <&vcc>;
+				};
+
+				/* LCD panel and FM radio */
+				ldo6: LDO6 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					inl-supply = <&vcc>;
+				};
+
+				/* ??? */
+				LDO7 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					/*regulator-always-on;*/
+					inl-supply = <&vcc>;
+				};
+
+				/*
+				 * The colors on the LCD are wrong when this is
+				 * off. Which is strange, since the LCD panel
+				 * data sheet only mentions a 3.3V input.
+				 */
+				LDO8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					inl-supply = <&vcc>;
+				};
+
+				/* RTC fixed 3.3V */
+				LDO_REG9 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					inl-supply = <&vcc>;
+				};
+
+				/* Unused fixed 1.2V */
+				LDO_REG10 {
+					inl-supply = <&vcc>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		nt39016@0 {
+			compatible = "kingdisplay,kd035g6-54nt";
+			reg = <0>;
+
+			spi-max-frequency = <3125000>;
+			spi-3wire;
+			spi-cs-high;
+
+			reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+			backlight = <&backlight>;
+			power-supply = <&ldo6>;
+
+			port {
+				panel_input: endpoint {
+					remote-endpoint = <&panel_output>;
+				};
+			};
+		};
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		label = "mini-USB";
+		type = "mini";
+
+		/*
+		 * USB OTG is not yet working reliably, the ID detection
+		 * mechanism tends to fry easily for unknown reasons.
+		 * Until this is fixed, disable OTG by not providing the
+		 * ID GPIO to the driver.
+		 */
+		//id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+		vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&otg_vbus>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_otg>;
+
+		port {
+			usb_ep: endpoint {
+				remote-endpoint = <&usb_otg_ep>;
+			};
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&pinctrl {
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-24bit";
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data";
+	};
+
+	pins_mmc0: mmc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit-a", "mmc0-4bit-a";
+	};
+
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit-d", "mmc1-4bit-d";
+	};
+
+	pins_otg: otg {
+		otg-vbus-pin {
+			function = "otg";
+			groups = "otg-vbus";
+		};
+
+		vbus-pin {
+			pins = "PB5";
+			bias-disable;
+		};
+	};
+
+	pins_pwm1: pwm1 {
+		function = "pwm1";
+		groups = "pwm1";
+	};
+
+	pins_pwm4: pwm4 {
+		function = "pwm4";
+		groups = "pwm4";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+
+	status = "okay";
+};
+
+&cgu {
+	/*
+	 * Put high-speed peripherals under PLL1, such that we can change the
+	 * PLL0 frequency on demand without having to suspend peripherals.
+	 * We use a rate of 432 MHz, which is the least common multiple of
+	 * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+	 * Put the GPU under PLL0 since we want a higher frequency.
+	 * Use the 32 kHz oscillator as the parent of the RTC for a higher
+	 * precision.
+	 */
+	assigned-clocks =
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_GPU>,
+		<&cgu JZ4770_CLK_RTC>,
+		<&cgu JZ4770_CLK_UHC>,
+		<&cgu JZ4770_CLK_LPCLK_MUX>,
+		<&cgu JZ4770_CLK_MMC0_MUX>,
+		<&cgu JZ4770_CLK_MMC1_MUX>;
+	assigned-clock-parents =
+		<0>,
+		<&cgu JZ4770_CLK_PLL0>,
+		<&cgu JZ4770_CLK_OSC32K>,
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_PLL1>;
+	assigned-clock-rates =
+		<432000000>,
+		<600000000>;
+};
+
+&uhc {
+	/* The WiFi module is connected to the UHC. */
+	status = "okay";
+};
+
+&tcu {
+	/*
+	 * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+	 * and use RTC as the parent for the watchdog clock
+	 */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+			  <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+	assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+	assigned-clock-rates = <750000>, <750000>, <12000000>;
+
+	/* PWM1 is in use, so use channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&usb_otg {
+	port {
+		usb_otg_ep: endpoint {
+			remote-endpoint = <&usb_ep>;
+		};
+	};
+};
+
+&otg_phy {
+	vcc-supply = <&ldo5>;
+};
+
+&rtc {
+	clocks = <&cgu JZ4770_CLK_RTC>;
+	clock-names = "rtc";
+
+	system-power-controller;
+};
+
+&mmc0 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <48000000>;
+	vmmc-supply = <&vcc>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	max-frequency = <48000000>;
+	cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mmc1_power>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+
+	port {
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0_proto.dts b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
new file mode 100644
index 000000000..02df22f8a
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+	model = "GCW Zero Prototype";
+};
+
+&memory {
+	/* Prototype has only 256 MiB of RAM */
+	reg = <0x0 0x10000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
new file mode 100644
index 000000000..a1f0b71c9
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4725b";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-mxu1.0";
+			reg = <0>;
+
+			clocks = <&cgu JZ4725B_CLK_CCLK>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc";
+		reg = <0x10001000 0x14>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: clock-controller@10000000 {
+		compatible = "ingenic,jz4725b-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4725b-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4725B_CLK_RTC>,
+			 <&cgu JZ4725B_CLK_EXT>,
+			 <&cgu JZ4725B_CLK_PCLK>,
+			 <&cgu JZ4725B_CLK_TCU>;
+		clock-names = "rtc", "ext", "pclk", "tcu";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <23>, <22>, <21>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@60 {
+			compatible = "ingenic,jz4725b-pwm";
+			reg = <0x60 0x40>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>;
+			clock-names = "timer0", "timer1", "timer2",
+				      "timer3", "timer4", "timer5";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4725b-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <6>;
+
+		clocks = <&cgu JZ4725B_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pinctrl@10010000 {
+		compatible = "ingenic,jz4725b-pinctrl";
+		reg = <0x10010000 0x400>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4725b-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+	};
+
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s";
+		reg = <0x10020000 0x38>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_AIC>,
+			 <&cgu JZ4725B_CLK_I2S>,
+			 <&cgu JZ4725B_CLK_EXT>,
+			 <&cgu JZ4725B_CLK_PLL_HALF>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a4 {
+		compatible = "ingenic,jz4725b-codec";
+		reg = <0x100200a4 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc0: mmc@10021000 {
+		compatible = "ingenic,jz4725b-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4725B_CLK_MMC0>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <25>;
+
+		dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
+	mmc1: mmc@10022000 {
+		compatible = "ingenic,jz4725b-mmc";
+		reg = <0x10022000 0x1000>;
+
+		clocks = <&cgu JZ4725B_CLK_MMC1>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+
+		dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
+	uart: serial@10030000 {
+		compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <9>;
+
+		clocks = <&ext>, <&cgu JZ4725B_CLK_UART>;
+		clock-names = "baud", "module";
+	};
+
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4725b-adc";
+		#io-channel-cells = <1>;
+
+		reg = <0x10070000 0x30>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10070000 0x30>;
+
+		clocks = <&cgu JZ4725B_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	nemc: memory-controller@13010000 {
+		compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc";
+		reg = <0x13010000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>,
+			 <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>;
+
+		clocks = <&cgu JZ4725B_CLK_MCLK>;
+	};
+
+	dmac: dma-controller@13020000 {
+		compatible = "ingenic,jz4725b-dma";
+		reg = <0x13020000 0xd8>, <0x13020300 0x14>;
+
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <29>;
+
+		clocks = <&cgu JZ4725B_CLK_DMA>;
+	};
+
+	udc: usb@13040000 {
+		compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb";
+		reg = <0x13040000 0x10000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27>;
+		interrupt-names = "mc";
+
+		clocks = <&cgu JZ4725B_CLK_UDC>;
+		clock-names = "udc";
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4725b-lcd";
+		reg = <0x13050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		clocks = <&cgu JZ4725B_CLK_LCD>;
+		clock-names = "lcd_pclk";
+
+		lcd_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@8 {
+				reg = <8>;
+
+				ipu_output: endpoint {
+					remote-endpoint = <&ipu_input>;
+				};
+			};
+		};
+	};
+
+	ipu: ipu@13080000 {
+		compatible = "ingenic,jz4725b-ipu";
+		reg = <0x13080000 0x64>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+
+		clocks = <&cgu JZ4725B_CLK_IPU>;
+		clock-names = "ipu";
+
+		port {
+			ipu_input: endpoint {
+				remote-endpoint = <&ipu_output>;
+			};
+		};
+	};
+
+	bch: ecc-controller@130d0000 {
+		compatible = "ingenic,jz4725b-bch";
+		reg = <0x130d0000 0x44>;
+
+		clocks = <&cgu JZ4725B_CLK_BCH>;
+	};
+
+	rom: memory@1fc00000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x1fc00000 0x2000>;
+
+		bank-width = <4>;
+		device-width = <1>;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
new file mode 100644
index 000000000..eee523678
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4740";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-mxu1.0";
+			reg = <0>;
+
+			clocks = <&cgu JZ4740_CLK_CCLK>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4740-intc";
+		reg = <0x10001000 0x14>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtc: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4740-cgu@10000000 {
+		compatible = "ingenic,jz4740-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&rtc>;
+		clock-names = "ext", "rtc";
+
+		#clock-cells = <1>;
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4740-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4740_CLK_RTC>,
+			 <&cgu JZ4740_CLK_EXT>,
+			 <&cgu JZ4740_CLK_PCLK>,
+			 <&cgu JZ4740_CLK_TCU>;
+		clock-names = "rtc", "ext", "pclk", "tcu";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <23 22 21>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+	};
+
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4740-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <15>;
+
+		clocks = <&cgu JZ4740_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4740-pinctrl";
+		reg = <0x10010000 0x400>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <28>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <27>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <26>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4740-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <25>;
+		};
+	};
+
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4740-i2s";
+		reg = <0x10020000 0x38>;
+
+		#sound-dai-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		clocks = <&cgu JZ4740_CLK_AIC>,
+			 <&cgu JZ4740_CLK_I2S>,
+			 <&cgu JZ4740_CLK_EXT>,
+			 <&cgu JZ4740_CLK_PLL_HALF>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a4 {
+		compatible = "ingenic,jz4740-codec";
+		reg = <0x10020080 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4740_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc: mmc@10021000 {
+		compatible = "ingenic,jz4740-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4740_CLK_MMC>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <14>;
+
+		dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4740-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <9>;
+
+		clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+		clock-names = "baud", "module";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4740-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <8>;
+
+		clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
+		clock-names = "baud", "module";
+	};
+
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4740-adc";
+		reg = <0x10070000 0x30>;
+		#io-channel-cells = <1>;
+
+		clocks = <&cgu JZ4740_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <12>;
+	};
+
+	nemc: memory-controller@13010000 {
+		compatible = "ingenic,jz4740-nemc";
+		reg = <0x13010000 0x54>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x18000000 0x4000000>,
+			 <2 0 0x14000000 0x4000000>,
+			 <3 0 0x0c000000 0x4000000>,
+			 <4 0 0x08000000 0x4000000>;
+
+		clocks = <&cgu JZ4740_CLK_MCLK>;
+	};
+
+	ecc: ecc-controller@13010100 {
+		compatible = "ingenic,jz4740-ecc";
+		reg = <0x13010100 0x2C>;
+
+		clocks = <&cgu JZ4740_CLK_MCLK>;
+	};
+
+	dmac: dma-controller@13020000 {
+		compatible = "ingenic,jz4740-dma";
+		reg = <0x13020000 0xbc>, <0x13020300 0x14>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <20>;
+
+		clocks = <&cgu JZ4740_CLK_DMA>;
+	};
+
+	uhc: uhc@13030000 {
+		compatible = "ingenic,jz4740-ohci", "generic-ohci";
+		reg = <0x13030000 0x1000>;
+
+		clocks = <&cgu JZ4740_CLK_UHC>;
+		assigned-clocks = <&cgu JZ4740_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	udc: usb@13040000 {
+		compatible = "ingenic,jz4740-musb";
+		reg = <0x13040000 0x10000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+		interrupt-names = "mc";
+
+		clocks = <&cgu JZ4740_CLK_UDC>;
+		clock-names = "udc";
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4740-lcd";
+		reg = <0x13050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <30>;
+
+		clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+		clock-names = "lcd_pclk", "lcd";
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000..018721a9e
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4770";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+			reg = <0>;
+
+			clocks = <&cgu JZ4770_CLK_CCLK>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4770-intc";
+		reg = <0x10001000 0x40>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4770-cgu@10000000 {
+		compatible = "ingenic,jz4770-cgu", "simple-mfd";
+		reg = <0x10000000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+
+		otg_phy: usb-phy@3c {
+			compatible = "ingenic,jz4770-phy";
+			reg = <0x3c 0x10>;
+
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+			#phy-cells = <0>;
+		};
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4770-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_RTC>,
+			 <&cgu JZ4770_CLK_EXT>,
+			 <&cgu JZ4770_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4770-watchdog",
+				     "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4770-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+		reg = <0x10003000 0x40>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4770-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
+	aic: audio-controller@10020000 {
+		compatible = "ingenic,jz4770-i2s";
+		reg = <0x10020000 0x94>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+			 <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+		clock-names = "aic", "i2s", "ext", "pll half";
+
+		interrupt-parent = <&intc>;
+		interrupts = <34>;
+
+		dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+		dma-names = "rx", "tx";
+	};
+
+	codec: audio-codec@100200a0 {
+		compatible = "ingenic,jz4770-codec";
+		reg = <0x100200a4 0x8>;
+
+		#sound-dai-cells = <0>;
+
+		clocks = <&cgu JZ4770_CLK_AIC>;
+		clock-names = "aic";
+	};
+
+	mmc0: mmc@10021000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10021000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC0>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc1: mmc@10022000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10022000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC1>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	mmc2: mmc@10023000 {
+		compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+		reg = <0x10023000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_MMC2>;
+		clock-names = "mmc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <35>;
+
+		dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		status = "disabled";
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10030000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <5>;
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10031000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <4>;
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10032000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10033000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <2>;
+
+		status = "disabled";
+	};
+
+	adc: adc@10070000 {
+		compatible = "ingenic,jz4770-adc";
+		reg = <0x10070000 0x30>;
+
+		#io-channel-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_ADC>;
+		clock-names = "adc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	gpu: gpu@13040000 {
+		compatible = "vivante,gc";
+		reg = <0x13040000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>,
+			 <&cgu JZ4770_CLK_GPU>;
+		clock-names = "bus", "core", "shader";
+
+		interrupt-parent = <&intc>;
+		interrupts = <6>;
+	};
+
+	lcd: lcd-controller@13050000 {
+		compatible = "ingenic,jz4770-lcd";
+		reg = <0x13050000 0x300>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <31>;
+
+		clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+		clock-names = "lcd_pclk";
+	};
+
+	dmac0: dma-controller@13420000 {
+		compatible = "ingenic,jz4770-dma";
+		reg = <0x13420000 0xC0>, <0x13420300 0x20>;
+
+		#dma-cells = <2>;
+
+		clocks = <&cgu JZ4770_CLK_DMA>;
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+	};
+
+	dmac1: dma-controller@13420100 {
+		compatible = "ingenic,jz4770-dma";
+		reg = <0x13420100 0xC0>, <0x13420400 0x20>;
+
+		#dma-cells = <2>;
+
+		clocks = <&cgu JZ4770_CLK_DMA>;
+		interrupt-parent = <&intc>;
+		interrupts = <23>;
+	};
+
+	uhc: uhc@13430000 {
+		compatible = "generic-ohci";
+		reg = <0x13430000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <20>;
+
+		status = "disabled";
+	};
+
+	usb_otg: usb@13440000 {
+		compatible = "ingenic,jz4770-musb";
+		reg = <0x13440000 0x10000>;
+
+		clocks = <&cgu JZ4770_CLK_OTG>;
+		clock-names = "udc";
+
+		interrupt-parent = <&intc>;
+		interrupts = <21>;
+		interrupt-names = "mc";
+
+		phys = <&otg_phy>;
+
+		usb-role-switch;
+	};
+
+	rom: memory@1fc00000 {
+		compatible = "mtd-rom";
+		probe-type = "map_rom";
+		reg = <0x1fc00000 0x2000>;
+
+		bank-width = <4>;
+		device-width = <1>;
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
new file mode 100644
index 000000000..830e5dd35
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/dma/jz4780-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4780";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+			reg = <0>;
+
+			clocks = <&cgu JZ4780_CLK_CPU>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+			reg = <1>;
+
+			clocks = <&cgu JZ4780_CLK_CORE1>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtc: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4780-cgu@10000000 {
+		compatible = "ingenic,jz4780-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&rtc>;
+		clock-names = "ext", "rtc";
+
+		#clock-cells = <1>;
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4780-tcu",
+			     "ingenic,jz4770-tcu",
+			     "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4780_CLK_RTCLK>,
+			 <&cgu JZ4780_CLK_EXCLK>,
+			 <&cgu JZ4780_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4780-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+				 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+				 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+				 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+
+	rtc_dev: rtc@10003000 {
+		compatible = "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu JZ4780_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4780-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4780-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
+	spi_gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		num-chipselects = <2>;
+
+		gpio-miso = <&gpe 14 0>;
+		gpio-sck = <&gpe 15 0>;
+		gpio-mosi = <&gpe 17 0>;
+		cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
+
+		spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10033000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <48>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart4: serial@10034000 {
+		compatible = "ingenic,jz4780-uart";
+		reg = <0x10034000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <34>;
+
+		clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	i2c0: i2c@10050000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <0x10050000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu JZ4780_CLK_SMB0>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c0_data>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@10051000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10051000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu JZ4780_CLK_SMB1>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c1_data>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c@10052000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10052000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu JZ4780_CLK_SMB2>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c2_data>;
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@10053000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10053000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <57>;
+
+		clocks = <&cgu JZ4780_CLK_SMB3>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c3_data>;
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@10054000 {
+		compatible = "ingenic,jz4780-i2c";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10054000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <56>;
+
+		clocks = <&cgu JZ4780_CLK_SMB4>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c4_data>;
+
+		status = "disabled";
+	};
+
+	nemc: nemc@13410000 {
+		compatible = "ingenic,jz4780-nemc", "simple-mfd";
+		reg = <0x13410000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x13410000 0x10000>,
+			 <1 0 0x1b000000 0x1000000>,
+			 <2 0 0x1a000000 0x1000000>,
+			 <3 0 0x19000000 0x1000000>,
+			 <4 0 0x18000000 0x1000000>,
+			 <5 0 0x17000000 0x1000000>,
+			 <6 0 0x16000000 0x1000000>;
+
+		clocks = <&cgu JZ4780_CLK_NEMC>;
+
+		status = "disabled";
+
+		efuse: efuse@d0 {
+			reg = <0 0xd0 0x30>;
+			compatible = "ingenic,jz4780-efuse";
+
+			clocks = <&cgu JZ4780_CLK_AHB2>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_addr: eth-mac-addr@22 {
+				reg = <0x22 0x6>;
+			};
+		};
+	};
+
+	dma: dma@13420000 {
+		compatible = "ingenic,jz4780-dma";
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu JZ4780_CLK_PDMA>;
+	};
+
+	mmc0: mmc@13450000 {
+		compatible = "ingenic,jz4780-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu JZ4780_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+		dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+		       <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	mmc1: mmc@13460000 {
+		compatible = "ingenic,jz4780-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu JZ4780_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+		dmas = <&dma JZ4780_DMA_MSC1_RX 0xffffffff>,
+		       <&dma JZ4780_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	bch: bch@134d0000 {
+		compatible = "ingenic,jz4780-bch";
+		reg = <0x134d0000 0x10000>;
+
+		clocks = <&cgu JZ4780_CLK_BCH>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
new file mode 100644
index 000000000..ba0218971
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4740.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/input/input.h>
+
+#define KEY_QI_QI	KEY_F13
+#define KEY_QI_UPRED	KEY_RIGHTALT
+#define KEY_QI_VOLUP	KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
+#define KEY_QI_FN	KEY_LEFTCTRL
+
+/ {
+	compatible = "qi,lb60", "ingenic,jz4740";
+	model = "Ben Nanonote";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vcc: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mmc_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcc";
+		gpio = <&gpd 2 0>;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_supply: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "amp_supply";
+		gpio = <&gpd 4 0>;
+		enable-active-high;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&amp_supply>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "QI LB60";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Microphone", "Mic";
+		simple-audio-card,routing =
+			"MIC", "Mic",
+			"Speaker", "OUTL",
+			"Speaker", "OUTR",
+			"INL", "LOUT",
+			"INR", "ROUT";
+
+		simple-audio-card,aux-devs = <&amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "Power";
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpd 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-matrix-keypad";
+
+		col-scan-delay-us = <10>;
+		debounce-delay-ms = <10>;
+		wakeup-source;
+
+		row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+			    <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+		col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+			    <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
+		gpio-activelow;
+
+		linux,keymap =
+			<MATRIX_KEY(0, 0, KEY_F1)>,	/* S2 */
+			<MATRIX_KEY(0, 1, KEY_F2)>,	/* S3 */
+			<MATRIX_KEY(0, 2, KEY_F3)>,	/* S4 */
+			<MATRIX_KEY(0, 3, KEY_F4)>,	/* S5 */
+			<MATRIX_KEY(0, 4, KEY_F5)>,	/* S6 */
+			<MATRIX_KEY(0, 5, KEY_F6)>,	/* S7 */
+			<MATRIX_KEY(0, 6, KEY_F7)>,	/* S8 */
+
+			<MATRIX_KEY(1, 0, KEY_Q)>,	/* S10 */
+			<MATRIX_KEY(1, 1, KEY_W)>,	/* S11 */
+			<MATRIX_KEY(1, 2, KEY_E)>,	/* S12 */
+			<MATRIX_KEY(1, 3, KEY_R)>,	/* S13 */
+			<MATRIX_KEY(1, 4, KEY_T)>,	/* S14 */
+			<MATRIX_KEY(1, 5, KEY_Y)>,	/* S15 */
+			<MATRIX_KEY(1, 6, KEY_U)>,	/* S16 */
+			<MATRIX_KEY(1, 7, KEY_I)>,	/* S17 */
+			<MATRIX_KEY(2, 0, KEY_A)>,	/* S18 */
+			<MATRIX_KEY(2, 1, KEY_S)>,	/* S19 */
+			<MATRIX_KEY(2, 2, KEY_D)>,	/* S20 */
+			<MATRIX_KEY(2, 3, KEY_F)>,	/* S21 */
+			<MATRIX_KEY(2, 4, KEY_G)>,	/* S22 */
+			<MATRIX_KEY(2, 5, KEY_H)>,	/* S23 */
+			<MATRIX_KEY(2, 6, KEY_J)>,	/* S24 */
+			<MATRIX_KEY(2, 7, KEY_K)>,	/* S25 */
+			<MATRIX_KEY(3, 0, KEY_ESC)>,	/* S26 */
+			<MATRIX_KEY(3, 1, KEY_Z)>,	/* S27 */
+			<MATRIX_KEY(3, 2, KEY_X)>,	/* S28 */
+			<MATRIX_KEY(3, 3, KEY_C)>,	/* S29 */
+			<MATRIX_KEY(3, 4, KEY_V)>,	/* S30 */
+			<MATRIX_KEY(3, 5, KEY_B)>,	/* S31 */
+			<MATRIX_KEY(3, 6, KEY_N)>,	/* S32 */
+			<MATRIX_KEY(3, 7, KEY_M)>,	/* S33 */
+			<MATRIX_KEY(4, 0, KEY_TAB)>,	/* S34 */
+			<MATRIX_KEY(4, 1, KEY_CAPSLOCK)>,	/* S35 */
+			<MATRIX_KEY(4, 2, KEY_BACKSLASH)>,	/* S36 */
+			<MATRIX_KEY(4, 3, KEY_APOSTROPHE)>,	/* S37 */
+			<MATRIX_KEY(4, 4, KEY_COMMA)>,	/* S38 */
+			<MATRIX_KEY(4, 5, KEY_DOT)>,	/* S39 */
+			<MATRIX_KEY(4, 6, KEY_SLASH)>,	/* S40 */
+			<MATRIX_KEY(4, 7, KEY_UP)>,	/* S41 */
+			<MATRIX_KEY(5, 0, KEY_O)>,	/* S42 */
+			<MATRIX_KEY(5, 1, KEY_L)>,	/* S43 */
+			<MATRIX_KEY(5, 2, KEY_EQUAL)>,	/* S44 */
+			<MATRIX_KEY(5, 3, KEY_QI_UPRED)>,	/* S45 */
+			<MATRIX_KEY(5, 4, KEY_SPACE)>,	/* S46 */
+			<MATRIX_KEY(5, 5, KEY_QI_QI)>,	/* S47 */
+			<MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>,	/* S48 */
+			<MATRIX_KEY(5, 7, KEY_LEFT)>,	/* S49 */
+			<MATRIX_KEY(6, 0, KEY_F8)>,	/* S50 */
+			<MATRIX_KEY(6, 1, KEY_P)>,	/* S51 */
+			<MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+			<MATRIX_KEY(6, 3, KEY_ENTER)>,	/* S53 */
+			<MATRIX_KEY(6, 4, KEY_QI_VOLUP)>,	/* S54 */
+			<MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>,	/* S55 */
+			<MATRIX_KEY(6, 6, KEY_DOWN)>,	/* S56 */
+			<MATRIX_KEY(6, 7, KEY_RIGHT)>,	/* S57 */
+
+			<MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>,	/* S58 */
+			<MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+			<MATRIX_KEY(7, 2, KEY_QI_FN)>;	/* S60 */
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+	};
+
+	usb_charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+		status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+	};
+
+	simple_battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4200000>;
+	};
+
+	pmu {
+		compatible = "ingenic,jz4740-battery";
+		io-channels = <&adc INGENIC_ADC_BATTERY>;
+		io-channel-names = "battery";
+		power-supplies = <&usb_charger>;
+		monitored-battery = <&simple_battery>;
+	};
+
+	hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc INGENIC_ADC_AUX>;
+	};
+
+	panel: panel {
+		compatible = "giantplus,gpm940b0";
+
+		power-supply = <&vcc>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+
+		vcc-supply = <&vcc>;
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+	system-power-controller;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&nemc {
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4740-nand";
+		reg = <1 0 0x4000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ecc-engine = <&ecc>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <4>;
+			nand-ecc-mode = "hw";
+			nand-is-boot-medium;
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "boot";
+					reg = <0x0 0x400000>;
+				};
+
+				partition@400000 {
+					label = "kernel";
+					reg = <0x400000 0x400000>;
+				};
+
+				partition@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0>;
+				};
+			};
+		};
+	};
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+
+	port {
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&udc {
+	phys = <&usb_phy>;
+};
+
+&pinctrl {
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-8bit";
+	};
+
+	pins_nemc: nemc {
+		function = "nand";
+		groups = "nand-fre-fwe", "nand-cs1";
+	};
+
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+
+	pins_mmc: mmc {
+		mmc {
+			function = "mmc";
+			groups = "mmc-1bit", "mmc-4bit";
+			bias-disable;
+		};
+
+		mmc-gpios {
+			pins = "PD0", "PD2";
+			bias-disable;
+		};
+	};
+};
+
+&mmc {
+	bus-width = <4>;
+	max-frequency = <24000000>;
+	cd-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&mmc_power>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc>;
+};
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <750000>, <750000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts
new file mode 100644
index 000000000..4eb1edbfc
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/rs90.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4725b.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	compatible = "ylm,rs90", "ingenic,jz4725b";
+	model = "RS-90";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	vcc: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vcc";
+		regulaor-min-microvolt = <3300000>;
+		regulaor-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 40000 0>;
+
+		brightness-levels = <0 16 32 48 64 80 112 144 192 255>;
+		default-brightness-level = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_pwm3>;
+
+		power-supply = <&vcc>;
+	};
+
+	keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key@0 {
+			label = "D-pad up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpc 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key@1 {
+			label = "D-pad down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpc 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key@2 {
+			label = "D-pad left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpb 31 GPIO_ACTIVE_LOW>;
+		};
+
+		key@3 {
+			label = "D-pad right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpd 21 GPIO_ACTIVE_LOW>;
+		};
+
+		key@4 {
+			label = "Button A";
+			linux,code = <KEY_LEFTCTRL>;
+			gpios = <&gpc 31 GPIO_ACTIVE_LOW>;
+		};
+
+		key@5 {
+			label = "Button B";
+			linux,code = <KEY_LEFTALT>;
+			gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+		};
+
+		key@6 {
+			label = "Right shoulder button";
+			linux,code = <KEY_BACKSPACE>;
+			gpios = <&gpc 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+		};
+
+		key@7 {
+			label = "Start button";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpd 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys@1 {
+		compatible = "adc-keys";
+		io-channels = <&adc INGENIC_ADC_AUX>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1400000>;
+		poll-interval = <30>;
+
+		key@0 {
+			label = "Left shoulder button";
+			linux,code = <KEY_TAB>;
+			press-threshold-microvolt = <800000>;
+		};
+
+		key@1 {
+			label = "Select button";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1100000>;
+		};
+	};
+
+	amp: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
+
+		VCC-supply = <&vcc>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "rs90-audio";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,widgets =
+			"Speaker", "Speaker",
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"INL", "LHPOUT",
+			"INR", "RHPOUT",
+			"Headphones", "LHPOUT",
+			"Headphones", "RHPOUT",
+			"Speaker", "OUTL",
+			"Speaker", "OUTR";
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+		simple-audio-card,aux-devs = <&amp>;
+
+		simple-audio-card,bitclock-master = <&dai_codec>;
+		simple-audio-card,frame-master = <&dai_codec>;
+
+		dai_cpu: simple-audio-card,cpu {
+			sound-dai = <&aic>;
+		};
+
+		dai_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+
+	};
+
+	usb_phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+
+		clocks = <&cgu JZ4725B_CLK_UDC_PHY>;
+		clock-names = "main_clk";
+		vcc-supply = <&vcc>;
+	};
+
+	panel {
+		compatible = "sharp,ls020b1dd01d";
+
+		backlight = <&backlight>;
+		power-supply = <&vcc>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&panel_output>;
+			};
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+	system-power-controller;
+};
+
+&udc {
+	phys = <&usb_phy>;
+};
+
+&pinctrl {
+	pins_mmc1: mmc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit";
+	};
+
+	pins_nemc: nemc {
+		function = "nand";
+		groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe";
+	};
+
+	pins_pwm3: pwm3 {
+		function = "pwm3";
+		groups = "pwm3";
+		bias-disable;
+	};
+
+	pins_lcd: lcd {
+		function = "lcd";
+		groups = "lcd-8bit", "lcd-16bit", "lcd-special";
+	};
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	bus-width = <1>;
+	max-frequency = <48000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mmc1>;
+
+	cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>;
+};
+
+&uart {
+	/*
+	 * The pins for RX/TX are used for the right shoulder button and
+	 * backlight PWM.
+	 */
+	status = "disabled";
+};
+
+&nemc {
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4725b-nand";
+		reg = <1 0 0x4000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ecc-engine = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
+		rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <8>;
+			nand-ecc-mode = "hw";
+			nand-is-boot-medium;
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x0 0x20000>;
+				};
+
+				partition@20000 {
+					label = "system";
+					reg = <0x20000 0x0>;
+				};
+			};
+		};
+	};
+};
+
+&cgu {
+	/* Use 32kHz oscillator as the parent of the RTC clock */
+	assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
+	assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+};
+
+&tcu {
+	/*
+	 * 750 kHz for the system timer and clocksource, and use RTC as the
+	 * parent for the watchdog clock.
+	 */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>;
+	assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>;
+	assigned-clock-rates = <750000>, <750000>;
+};
+
+&lcd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+	port@0 {
+		reg = <0>;
+
+		panel_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 000000000..1f1f896dd
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1000", "ingenic,x1000e";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+			reg = <0>;
+
+			clocks = <&cgu X1000_CLK_CPU>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1000-cgu@10000000 {
+		compatible = "ingenic,x1000-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1000-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1000_CLK_RTCLK>,
+			 <&cgu X1000_CLK_EXCLK>,
+			 <&cgu X1000_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1000_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1000-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu X1000_CLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu X1000_CLK_I2C1>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1000_CLK_I2C2>;
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1000-dma";
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1000_CLK_PDMA>;
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1000_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1000_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1000-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1000_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
new file mode 100644
index 000000000..b05dac3ae
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/x1830-cgu.h>
+#include <dt-bindings/dma/x1830-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1830";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "ingenic,xburst-fpu2.0-mxu2.0";
+			reg = <0>;
+
+			clocks = <&cgu X1830_CLK_CPU>;
+			clock-names = "cpu";
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1830-cgu@10000000 {
+		compatible = "ingenic,x1830-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1830_CLK_RTCLK
+			  &cgu X1830_CLK_EXCLK
+			  &cgu X1830_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1830_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1830-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1830-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1830_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1830_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu X1830_CLK_SMB0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu X1830_CLK_SMB1>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1830_CLK_SMB2>;
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1830-dma";
+		reg = <0x13420000 0x400
+			   0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1830_CLK_PDMA>;
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1830_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1830_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1830_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1830_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1830-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1830_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
new file mode 100644
index 000000000..f5dfc0624
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_EASY50712)	+= easy50712.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
new file mode 100644
index 000000000..510be63c8
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "lantiq,xway", "lantiq,danube";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24Kc";
+		};
+	};
+
+	biu@1f800000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,biu", "simple-bus";
+		reg = <0x1f800000 0x800000>;
+		ranges = <0x0 0x1f800000 0x7fffff>;
+
+		icu0: icu@80200 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "lantiq,icu";
+			reg = <0x80200 0x120>;
+		};
+
+		watchdog@803f0 {
+			compatible = "lantiq,wdt";
+			reg = <0x803f0 0x10>;
+		};
+	};
+
+	sram@1f000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,sram";
+		reg = <0x1f000000 0x800000>;
+		ranges = <0x0 0x1f000000 0x7fffff>;
+
+		eiu0: eiu@101000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent;
+			compatible = "lantiq,eiu-xway";
+			reg = <0x101000 0x1000>;
+		};
+
+		pmu0: pmu@102000 {
+			compatible = "lantiq,pmu-xway";
+			reg = <0x102000 0x1000>;
+		};
+
+		cgu0: cgu@103000 {
+			compatible = "lantiq,cgu-xway";
+			reg = <0x103000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rcu0: rcu@203000 {
+			compatible = "lantiq,rcu-xway";
+			reg = <0x203000 0x1000>;
+		};
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lantiq,fpi", "simple-bus";
+		ranges = <0x0 0x10000000 0xeefffff>;
+		reg = <0x10000000 0xef00000>;
+
+		gptu@e100a00 {
+			compatible = "lantiq,gptu-xway";
+			reg = <0xe100a00 0x100>;
+		};
+
+		serial@e100c00 {
+			compatible = "lantiq,asc";
+			reg = <0xe100c00 0x400>;
+			interrupt-parent = <&icu0>;
+			interrupts = <112 113 114>;
+		};
+
+		dma0: dma@e104100 {
+			compatible = "lantiq,dma-xway";
+			reg = <0xe104100 0x800>;
+		};
+
+		ebu0: ebu@e105300 {
+			compatible = "lantiq,ebu-xway";
+			reg = <0xe105300 0x100>;
+		};
+
+		pci0: pci@e105400 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			compatible = "lantiq,pci-xway";
+			bus-range = <0x0 0x0>;
+			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
+				  0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+			reg = <0x7000000 0x8000		/* config space */
+				0xe105400 0x400>;	/* pci bridge */
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
new file mode 100644
index 000000000..1ce20b7d0
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	fpi@10000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		localbus@0 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+				1 0 0x4000000 0x4000010>; /* addsel1 */
+			compatible = "lantiq,localbus", "simple-bus";
+
+			nor-boot@0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x2000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x00000 0x10000>; /* 64 KB */
+				};
+
+				partition@10000 {
+					label = "uboot_env";
+					reg = <0x10000 0x10000>; /* 64 KB */
+				};
+
+				partition@20000 {
+					label = "linux";
+					reg = <0x20000 0x3d0000>;
+				};
+
+				partition@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x400000>;
+				};
+			};
+		};
+
+		gpio: pinmux@e100b10 {
+			compatible = "lantiq,danube-pinctrl";
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0xe100b10 0xa0>;
+
+			state_default: pinmux {
+				stp {
+					lantiq,groups = "stp";
+					lantiq,function = "stp";
+				};
+				exin {
+					lantiq,groups = "exin1";
+					lantiq,function = "exin";
+				};
+				pci {
+					lantiq,groups = "gnt1";
+					lantiq,function = "pci";
+				};
+				conf_out {
+					lantiq,pins = "io4", "io5", "io6"; /* stp */
+					lantiq,open-drain;
+					lantiq,pull = <0>;
+				};
+			};
+		};
+
+		etop@e180000 {
+			compatible = "lantiq,etop-xway";
+			reg = <0xe180000 0x40000>;
+			interrupt-parent = <&icu0>;
+			interrupts = <73 78>;
+			phy-mode = "rmii";
+			mac-address = [ 00 11 22 33 44 55 ];
+		};
+
+		stp0: stp@e100bb0 {
+			#gpio-cells = <2>;
+			compatible = "lantiq,gpio-stp-xway";
+			gpio-controller;
+			reg = <0xe100bb0 0x40>;
+
+			lantiq,shadow = <0xfff>;
+			lantiq,groups = <0x3>;
+		};
+
+		pci@e105400 {
+			lantiq,bus-clock = <33333333>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+			>;
+			gpios-reset = <&gpio 21 0>;
+			req-mask = <0x1>;		/* GNT1 */
+		};
+
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
new file mode 100644
index 000000000..8fd0efb37
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -0,0 +1,8 @@
+# SPDX_License_Identifier: GPL_2.0
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_4core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64c_8core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64g_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64)	+= loongson64v_4core_virtio.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/loongson/loongson64c-package.dtsi b/arch/mips/boot/dts/loongson/loongson64c-package.dtsi
new file mode 100644
index 000000000..5bb876a4d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c-package.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			/* 3A HT Config Space */
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000
+			/* 3B HT Config Space */
+			0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+						<0x0f000000>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e0 0x8>;
+			clock-frequency = <33000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		cpu_uart1: serial@1fe001e8 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e8 0x8>;
+			clock-frequency = <33000000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+			no-loopback-test;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
new file mode 100644
index 000000000..c7ea4f1c0
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64c-4core-ls7a";
+};
+
+&package0 {
+	htvec: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htvec-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+			     <25 IRQ_TYPE_LEVEL_HIGH>,
+			     <26 IRQ_TYPE_LEVEL_HIGH>,
+			     <27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pch {
+	msi: msi-controller@2ff00000 {
+		compatible = "loongson,pch-msi-1.0";
+		reg = <0 0x2ff00000 0 0x8>;
+		interrupt-controller;
+		msi-controller;
+		loongson,msi-base-vec = <64>;
+		loongson,msi-num-vecs = <64>;
+		interrupt-parent = <&htvec>;
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts
new file mode 100644
index 000000000..d681a295d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64c-4core-rs780e";
+};
+
+&package0 {
+	htpic: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htpic-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+				<25 IRQ_TYPE_LEVEL_HIGH>,
+				<26 IRQ_TYPE_LEVEL_HIGH>,
+				<27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts
new file mode 100644
index 000000000..3c2044142
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64c-8core-rs780e";
+};
+
+&package0 {
+	htpic: interrupt-controller@1efdfb000080 {
+		compatible = "loongson,htpic-1.0";
+		reg = <0x1efd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+				<25 IRQ_TYPE_LEVEL_HIGH>,
+				<26 IRQ_TYPE_LEVEL_HIGH>,
+				<27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64g-package.dtsi b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
new file mode 100644
index 000000000..38abc570c
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0x00ffffff>, /* int0 */
+						<0xff000000>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe00100 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		cpu_uart1: serial@1fe001e8 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1fe00110 0x10>;
+			clock-frequency = <100000000>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+			no-loopback-test;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
new file mode 100644
index 000000000..c945f8565
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64g-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+	compatible = "loongson,loongson64g-4core-ls7a";
+};
+
+&package0 {
+	htvec: interrupt-controller@efdfb000080 {
+		compatible = "loongson,htvec-1.0";
+		reg = <0xefd 0xfb000080 0x40>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&liointc>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+			     <25 IRQ_TYPE_LEVEL_HIGH>,
+			     <26 IRQ_TYPE_LEVEL_HIGH>,
+			     <27 IRQ_TYPE_LEVEL_HIGH>,
+			     <28 IRQ_TYPE_LEVEL_HIGH>,
+			     <29 IRQ_TYPE_LEVEL_HIGH>,
+			     <30 IRQ_TYPE_LEVEL_HIGH>,
+			     <31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pch {
+	msi: msi-controller@2ff00000 {
+		compatible = "loongson,pch-msi-1.0";
+		reg = <0 0x2ff00000 0 0x8>;
+		interrupt-controller;
+		msi-controller;
+		loongson,msi-base-vec = <64>;
+		loongson,msi-num-vecs = <192>;
+		interrupt-parent = <&htvec>;
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts b/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts
new file mode 100644
index 000000000..41f0b110d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/ {
+	compatible = "loongson,loongson64v-4core-virtio";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	package0: bus@1fe00000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+			0 0x3ff00000 0 0x3ff00000 0x100000
+			0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+		liointc: interrupt-controller@3ff01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0 0x3ff01400 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>;
+			interrupt-names = "int0", "int1";
+
+			loongson,parent_int_map = <0x00000001>, /* int0 */
+						<0xfffffffe>, /* int1 */
+						<0x00000000>, /* int2 */
+						<0x00000000>; /* int3 */
+
+		};
+
+		cpu_uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0 0x1fe001e0 0x8>;
+			clock-frequency = <33000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+				0 0x40000000 0 0x40000000 0 0x40000000>; /* PCI MEM */
+
+		rtc0: rtc@10081000 {
+			compatible = "google,goldfish-rtc";
+			reg = <0 0x10081000 0 0x1000>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&liointc>;
+		};
+
+		pci@1a000000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			bus-range = <0x0 0x1f>;
+			reg = <0 0x1a000000 0 0x02000000>;
+
+			ranges = <0x01000000 0x0 0x00004000 0x0 0x18004000 0x0 0x0000c000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			interrupt-map = <
+				0x0000 0x0 0x0  0x1  &liointc  0x2 IRQ_TYPE_LEVEL_HIGH
+				0x0800 0x0 0x0  0x1  &liointc  0x3 IRQ_TYPE_LEVEL_HIGH
+				0x1000 0x0 0x0  0x1  &liointc  0x4 IRQ_TYPE_LEVEL_HIGH
+				0x1800 0x0 0x0  0x1  &liointc  0x5 IRQ_TYPE_LEVEL_HIGH
+				>;
+
+			interrupt-map-mask = <0x1800 0x0 0x0  0x7>;
+		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x4000>;
+		};
+	};
+
+	hypervisor {
+		compatible = "linux,kvm";
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
new file mode 100644
index 000000000..f99a7a11f
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	pch: bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+				0 0x20000000 0 0x20000000 0 0x10000000
+				0 0x40000000 0 0x40000000 0 0x40000000 /* PCI MEM */
+				0xe00 0x00000000 0xe00 0x00000000 0x100 0x0000000>;
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0 0x10000000 0 0x400>;
+			interrupt-controller;
+			interrupt-parent = <&htvec>;
+			loongson,pic-base-vec = <0>;
+			#interrupt-cells = <2>;
+		};
+
+		ls7a_uart0: serial@10080000 {
+			compatible = "ns16550a";
+			reg = <0 0x10080000 0 0x100>;
+			clock-frequency = <50000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		ls7a_uart1: serial@10080100 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x10080100 0 0x100>;
+			clock-frequency = <50000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		ls7a_uart2: serial@10080200 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x10080200 0 0x100>;
+			clock-frequency = <50000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		ls7a_uart3: serial@10080300 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x10080300 0 0x100>;
+			clock-frequency = <50000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+		};
+
+		pci@1a000000 {
+			compatible = "loongson,ls7a-pci";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <2>;
+			msi-parent = <&msi>;
+
+			reg = <0 0x1a000000 0 0x02000000>,
+				<0xefe 0x00000000 0 0x20000000>;
+
+			ranges = <0x01000000 0x0 0x00020000 0x0 0x18020000 0x0 0x00020000>,
+				 <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+			ohci@4,0 {
+				compatible = "pci0014,7a24.0",
+						   "pci0014,7a24",
+						   "pciclass0c0310",
+						   "pciclass0c03";
+
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ehci@4,1 {
+				compatible = "pci0014,7a14.0",
+						   "pci0014,7a14",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+				reg = <0x2100 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ohci@5,0 {
+				compatible = "pci0014,7a24.0",
+						   "pci0014,7a24",
+						   "pciclass0c0310",
+						   "pciclass0c03";
+
+				reg = <0x2800 0x0 0x0 0x0 0x0>;
+				interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			ehci@5,1 {
+				compatible = "pci0014,7a14.0",
+						   "pci0014,7a14",
+						   "pciclass0c0320",
+						   "pciclass0c03";
+
+				reg = <0x2900 0x0 0x0 0x0 0x0>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,0 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,1 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4100 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			sata@8,2 {
+				compatible = "pci0014,7a08.0",
+						   "pci0014,7a08",
+						   "pciclass010601",
+						   "pciclass0106";
+
+				reg = <0x4200 0x0 0x0 0x0 0x0>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			gpu@6,0 {
+				compatible = "pci0014,7a15.0",
+						   "pci0014,7a15",
+						   "pciclass030200",
+						   "pciclass0302";
+
+				reg = <0x3000 0x0 0x0 0x0 0x0>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			dc@6,1 {
+				compatible = "pci0014,7a06.0",
+						   "pci0014,7a06",
+						   "pciclass030000",
+						   "pciclass0300";
+
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			hda@7,0 {
+				compatible = "pci0014,7a07.0",
+						   "pci0014,7a07",
+						   "pciclass040300",
+						   "pciclass0403";
+
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+			};
+
+			gmac@3,0 {
+				compatible = "pci0014,7a03.0",
+						   "pci0014,7a03",
+						   "pciclass020000",
+						   "pciclass0200";
+
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				interrupt-parent = <&pic>;
+				phy-mode = "rgmii";
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "snps,dwmac-mdio";
+					phy0: ethernet-phy@0 {
+						reg = <0>;
+					};
+				};
+			};
+
+			gmac@3,1 {
+				compatible = "pci0014,7a03.0",
+						   "pci0014,7a03",
+						   "pciclass020000",
+						   "pciclass0200";
+
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_lpi";
+				interrupt-parent = <&pic>;
+				phy-mode = "rgmii";
+				mdio {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "snps,dwmac-mdio";
+					phy1: ethernet-phy@1 {
+						reg = <0>;
+					};
+				};
+			};
+
+			pci_bridge@9,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@a,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@b,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@c,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@d,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@e,0 {
+				compatible = "pci0014,7a09.1",
+						   "pci0014,7a09",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@f,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@10,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 41 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@11,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x8800 0x0 0x0 0x0 0x0>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@12,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x9000 0x0 0x0 0x0 0x0>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 43 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@13,0 {
+				compatible = "pci0014,7a29.1",
+						   "pci0014,7a29",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0x9800 0x0 0x0 0x0 0x0>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pci_bridge@14,0 {
+				compatible = "pci0014,7a19.1",
+						   "pci0014,7a19",
+						   "pciclass060400",
+						   "pciclass0604";
+
+				reg = <0xa000 0x0 0x0 0x0 0x0>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x20000>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
new file mode 100644
index 000000000..871c866e0
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	bus@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0x10000000 0 0x10000000 0 0x10000000
+				0 0x40000000 0 0x40000000 0 0x40000000
+				0xfd 0xfe000000 0xfd 0xfe000000  0 0x2000000 /* PCI Config Space */>;
+
+		pci@1a000000 {
+			compatible = "loongson,rs780e-pci";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			reg = <0 0x1a000000 0 0x02000000>;
+
+			ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x0000c000>,
+				 <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+		};
+
+		isa {
+			compatible = "isa";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <1 0 0 0x18000000 0x4000>;
+
+			rtc0: rtc@70 {
+				compatible = "motorola,mc146818";
+				reg = <1 0x70 0x8>;
+				interrupts = <8>;
+				interrupt-parent = <&htpic>;
+			};
+
+			acpi@800 {
+				compatible = "loongson,rs780e-acpi";
+				reg = <1 0x800 0x100>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
new file mode 100644
index 000000000..eb7151587
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb ocelot_pcb120.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
new file mode 100644
index 000000000..535a98284
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mscc,ocelot";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+			device_type = "cpu";
+			clocks = <&cpu_clk>;
+			reg = <0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	cpu_clk: cpu-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&cpu_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	ahb@70000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x70000000 0x2000000>;
+
+		interrupt-parent = <&intc>;
+
+		cpu_ctrl: syscon@0 {
+			compatible = "mscc,ocelot-cpu-syscon", "syscon";
+			reg = <0x0 0x2c>;
+		};
+
+		intc: interrupt-controller@70 {
+			compatible = "mscc,ocelot-icpu-intr";
+			reg = <0x70 0x70>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100000 0x20>;
+			interrupts = <6>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		i2c: i2c@100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x100400 0x100>, <0x198 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
+		uart2: serial@100800 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x100800 0x20>;
+			interrupts = <7>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+
+			status = "disabled";
+		};
+
+		spi: spi@101000 {
+			compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x101000 0x100>, <0x3c 0x18>;
+			interrupts = <9>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
+		switch@1010000 {
+			compatible = "mscc,vsc7514-switch";
+			reg = <0x1010000 0x10000>,
+			      <0x1030000 0x10000>,
+			      <0x1080000 0x100>,
+			      <0x10e0000 0x10000>,
+			      <0x11e0000 0x100>,
+			      <0x11f0000 0x100>,
+			      <0x1200000 0x100>,
+			      <0x1210000 0x100>,
+			      <0x1220000 0x100>,
+			      <0x1230000 0x100>,
+			      <0x1240000 0x100>,
+			      <0x1250000 0x100>,
+			      <0x1260000 0x100>,
+			      <0x1270000 0x100>,
+			      <0x1280000 0x100>,
+			      <0x1800000 0x80000>,
+			      <0x1880000 0x10000>,
+			      <0x1040000 0x10000>,
+			      <0x1050000 0x10000>,
+			      <0x1060000 0x10000>;
+			reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+				    "port2", "port3", "port4", "port5", "port6",
+				    "port7", "port8", "port9", "port10", "qsys",
+				    "ana", "s0", "s1", "s2";
+			interrupts = <18 21 22>;
+			interrupt-names = "ptp_rdy", "xtr", "inj";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+				};
+				port1: port@1 {
+					reg = <1>;
+				};
+				port2: port@2 {
+					reg = <2>;
+				};
+				port3: port@3 {
+					reg = <3>;
+				};
+				port4: port@4 {
+					reg = <4>;
+				};
+				port5: port@5 {
+					reg = <5>;
+				};
+				port6: port@6 {
+					reg = <6>;
+				};
+				port7: port@7 {
+					reg = <7>;
+				};
+				port8: port@8 {
+					reg = <8>;
+				};
+				port9: port@9 {
+					reg = <9>;
+				};
+				port10: port@10 {
+					reg = <10>;
+				};
+			};
+		};
+
+		reset@1070008 {
+			compatible = "mscc,ocelot-chip-reset";
+			reg = <0x1070008 0x4>;
+		};
+
+		gpio: pinctrl@1070034 {
+			compatible = "mscc,ocelot-pinctrl";
+			reg = <0x1070034 0x68>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 22>;
+			interrupt-controller;
+			interrupts = <13>;
+			#interrupt-cells = <2>;
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_16", "GPIO_17";
+				function = "twi";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_6", "GPIO_7";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_12", "GPIO_13";
+				function = "uart2";
+			};
+
+			miim1: miim1 {
+				pins = "GPIO_14", "GPIO_15";
+				function = "miim";
+			};
+
+		};
+
+		mdio0: mdio@107009c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,ocelot-miim";
+			reg = <0x107009c 0x24>, <0x10700f0 0x8>;
+			interrupts = <14>;
+			status = "disabled";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		mdio1: mdio@10700c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,ocelot-miim";
+			reg = <0x10700c0 0x24>;
+			interrupts = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&miim1>;
+			status = "disabled";
+		};
+
+		hsio: syscon@10d0000 {
+			compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+			reg = <0x10d0000 0x10000>;
+
+			serdes: serdes {
+				compatible = "mscc,vsc7514-serdes";
+				#phy-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
new file mode 100644
index 000000000..897de5025
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy-ocelot-serdes.h>
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb120", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&gpio {
+	phy_int_pins: phy_int_pins {
+		pins = "GPIO_4";
+		function = "gpio";
+	};
+
+	phy_load_save_pins: phy_load_save_pins {
+		pins = "GPIO_10";
+		function = "ptp2";
+	};
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
+
+	phy7: ethernet-phy@0 {
+		reg = <0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+	};
+	phy6: ethernet-phy@1 {
+		reg = <1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+	};
+	phy5: ethernet-phy@2 {
+		reg = <2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+	};
+	phy4: ethernet-phy@3 {
+		reg = <3>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
+
+&port4 {
+	phy-handle = <&phy7>;
+	phy-mode = "sgmii";
+	phys = <&serdes 4 SERDES1G(2)>;
+};
+
+&port5 {
+	phy-handle = <&phy4>;
+	phy-mode = "sgmii";
+	phys = <&serdes 5 SERDES1G(5)>;
+};
+
+&port6 {
+	phy-handle = <&phy6>;
+	phy-mode = "sgmii";
+	phys = <&serdes 6 SERDES1G(3)>;
+};
+
+&port9 {
+	phy-handle = <&phy5>;
+	phy-mode = "sgmii";
+	phys = <&serdes 9 SERDES1G(4)>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000..ef852f382
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+	compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0e000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "macronix,mx25l25635f", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
new file mode 100644
index 000000000..b5f742699
--- /dev/null
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MIPS_MALTA)	+= malta.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3)	+= sead3.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
new file mode 100644
index 000000000..f03279b1c
--- /dev/null
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
+/memreserve/ 0x00001000 0x000ef000;	/* YAMON */
+/memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mti,malta";
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	i8259: interrupt-controller@20 {
+		compatible = "intel,i8259";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	flash@1e000000 {
+		compatible = "intel,dt28f160", "cfi-flash";
+		reg = <0x1e000000 0x400000>;
+		bank-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			yamon@0 {
+				label = "YAMON";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			user-fs@100000 {
+				label = "User FS";
+				reg = <0x100000 0x2e0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x3e0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+		native-endian;
+
+		lcd@410 {
+			compatible = "mti,malta-lcd";
+			offset = <0x410>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x42>;
+		};
+	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
new file mode 100644
index 000000000..192c26ff1
--- /dev/null
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000;	// reserved
+/memreserve/ 0x00001000 0x000ef000;	// ROM data
+/memreserve/ 0x000f0000 0x004cc000;	// reserved
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mti,sead-3";
+	model = "MIPS SEAD-3";
+
+	chosen {
+		stdout-path = "serial1:115200";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "mti,mips14KEc", "mti,mips14Kc";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1b1c0000 {
+		compatible = "mti,gic";
+		reg = <0x1b1c0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+	};
+
+	ehci@1b200000 {
+		compatible = "generic-ehci";
+		reg = <0x1b200000 0x1000>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
+
+		has-transaction-translator;
+	};
+
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x200>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x50>;
+			mask = <0x4d>;
+		};
+
+		poweroff {
+			compatible = "restart-poweroff";
+		};
+	};
+
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+
+		lcd@200 {
+			compatible = "mti,sead3-lcd";
+			offset = <0x200>;
+		};
+	};
+
+	/* UART connected to FTDI & miniUSB socket */
+	uart0: uart@1f000900 {
+		compatible = "ns16550a";
+		reg = <0x1f000900 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	/* UART connected to RS232 socket */
+	uart1: uart@1f000800 {
+		compatible = "ns16550a";
+		reg = <0x1f000800 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	eth@1f010000 {
+		compatible = "smsc,lan9115";
+		reg = <0x1f010000 0x10000>;
+		reg-io-width = <4>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
+
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+	};
+};
diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
new file mode 100644
index 000000000..45af42244
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_XLP_EVP)	+= xlp_evp.dtb
+dtb-$(CONFIG_DT_XLP_SVP)	+= xlp_svp.dtb
+dtb-$(CONFIG_DT_XLP_FVP)	+= xlp_fvp.dtb
+dtb-$(CONFIG_DT_XLP_GVP)	+= xlp_gvp.dtb
+dtb-$(CONFIG_DT_XLP_RVP)	+= xlp_rvp.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/netlogic/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
new file mode 100644
index 000000000..e63e55926
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_evp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP8XX Device Tree Source for EVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-EVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@32000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x32100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@33000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x33100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+
+		gpio: xlp_gpio@34100 {
+			compatible = "netlogic,xlp832-gpio";
+			reg = <0 0x34100 0x1000>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-parent = <&pic>;
+			interrupts = <39>;
+			interrupt-controller;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
new file mode 100644
index 000000000..d05abf13f
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP2XX Device Tree Source for FVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-FVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@37100 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37100 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@37120 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x37120 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+
+		gpio: xlp_gpio@34100 {
+			compatible = "netlogic,xlp208-gpio";
+			reg = <0 0x34100 0x1000>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-parent = <&pic>;
+			interrupts = <39>;
+			interrupt-controller;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
new file mode 100644
index 000000000..d47de4851
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP9XX Device Tree Source for GVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-GVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x112100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		pic: pic@110000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x110000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+
+		gpio: xlp_gpio@114100 {
+			compatible = "netlogic,xlp980-gpio";
+			reg = <0 0x114100 0x1000>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-parent = <&pic>;
+			interrupts = <39>;
+			interrupt-controller;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_rvp.dts b/arch/mips/boot/dts/netlogic/xlp_rvp.dts
new file mode 100644
index 000000000..aa0faee19
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_rvp.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP5XX Device Tree Source for RVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-RVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x112100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <125000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		pic: pic@110000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x110000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+
+		gpio: xlp_gpio@114100 {
+			compatible = "netlogic,xlp532-gpio";
+			reg = <0 0x114100 0x1000>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-parent = <&pic>;
+			interrupts = <39>;
+			interrupt-controller;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
new file mode 100644
index 000000000..3bb0b2e08
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_svp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP3XX Device Tree Source for SVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-SVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@32000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x32100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@33000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x33100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			compatible = "netlogic,xlp-pic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+			interrupt-controller;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+
+		gpio: xlp_gpio@34100 {
+			compatible = "netlogic,xlp316-gpio";
+			reg = <0 0x34100 0x1000>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-parent = <&pic>;
+			interrupts = <39>;
+			interrupt-controller;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts
new file mode 100644
index 000000000..5389ef46c
--- /dev/null
+++ b/arch/mips/boot/dts/ni/169445.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ni,169445";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mti,mips14KEc";
+			clocks = <&baseclk>;
+			reg = <0>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	baseclk: baseclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ahb@1f300000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1f300000 0x80FFF>;
+
+		gpio1: gpio@10 {
+			compatible = "ni,169445-nand-gpio";
+			reg = <0x10 0x4>;
+			reg-names = "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio2: gpio@14 {
+			compatible = "ni,169445-nand-gpio";
+			reg = <0x14 0x4>;
+			reg-names = "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			no-output;
+		};
+
+		nand@0 {
+			compatible = "gpio-control-nand";
+			nand-on-flash-bbt;
+			nand-ecc-mode = "soft_bch";
+			nand-ecc-step-size = <512>;
+			nand-ecc-strength = <4>;
+			reg = <0x0 4>;
+			gpios = <&gpio2 0 0>, /* rdy */
+				<&gpio1 1 0>, /* nce */
+				<&gpio1 2 0>, /* ale */
+				<&gpio1 3 0>, /* cle */
+				<&gpio1 4 0>; /* nwp */
+		};
+
+		serial@80000 {
+			compatible = "ns16550a";
+			reg = <0x80000 0x1000>;
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <6>;
+			clocks = <&baseclk>;
+			reg-shift = <0>;
+		};
+
+		ethernet@40000 {
+			compatible = "snps,dwmac-4.10a";
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <5>;
+			interrupt-names = "macirq";
+			reg = <0x40000 0x2000>;
+			clock-names = "stmmaceth", "pclk";
+			clocks = <&baseclk>, <&baseclk>;
+
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile
new file mode 100644
index 000000000..93867e1a5
--- /dev/null
+++ b/arch/mips/boot/dts/ni/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= 169445.dtb
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
new file mode 100644
index 000000000..fb57f3632
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_PIC32_MZDA_SK)		+= pic32mzda_sk.dtb
+
+dtb-$(CONFIG_DTB_PIC32_NONE)		+= \
+					pic32mzda_sk.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
new file mode 100644
index 000000000..f1e3dad6b
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ */
+#include <dt-bindings/clock/microchip,pic32-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&evic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
+		gpio9 = &gpio9;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mti,mips14KEc";
+			device_type = "cpu";
+		};
+	};
+
+	soc {
+		compatible = "microchip,pic32mzda-infra";
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	/* external clock input on TxCLKI pin */
+	txcki: txcki_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <4000000>;
+		status = "disabled";
+	};
+
+	/* external input on REFCLKIx pin */
+	refix: refix_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		status = "disabled";
+	};
+
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		microchip,pic32mzda-sosc;
+	};
+
+	evic: interrupt-controller@1f810000 {
+		compatible = "microchip,pic32mzda-evic";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x1f810000 0x1000>;
+		microchip,external-irqs = <3 8 13 18 23>;
+	};
+
+	pic32_pinctrl: pinctrl@1f801400{
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "microchip,pic32mzda-pinctrl";
+		reg = <0x1f801400 0x400>;
+		clocks = <&rootclk PB1CLK>;
+	};
+
+	/* PORTA */
+	gpio0: gpio0@1f860000 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860000 0x100>;
+		interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <0>;
+		gpio-ranges = <&pic32_pinctrl 0 0 16>;
+	};
+
+	/* PORTB */
+	gpio1: gpio1@1f860100 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860100 0x100>;
+		interrupts = <119 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <1>;
+		gpio-ranges = <&pic32_pinctrl 0 16 16>;
+	};
+
+	/* PORTC */
+	gpio2: gpio2@1f860200 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860200 0x100>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <2>;
+		gpio-ranges = <&pic32_pinctrl 0 32 16>;
+	};
+
+	/* PORTD */
+	gpio3: gpio3@1f860300 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860300 0x100>;
+		interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <3>;
+		gpio-ranges = <&pic32_pinctrl 0 48 16>;
+	};
+
+	/* PORTE */
+	gpio4: gpio4@1f860400 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860400 0x100>;
+		interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <4>;
+		gpio-ranges = <&pic32_pinctrl 0 64 16>;
+	};
+
+	/* PORTF */
+	gpio5: gpio5@1f860500 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860500 0x100>;
+		interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <5>;
+		gpio-ranges = <&pic32_pinctrl 0 80 16>;
+	};
+
+	/* PORTG */
+	gpio6: gpio6@1f860600 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860600 0x100>;
+		interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <6>;
+		gpio-ranges = <&pic32_pinctrl 0 96 16>;
+	};
+
+	/* PORTH */
+	gpio7: gpio7@1f860700 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860700 0x100>;
+		interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <7>;
+		gpio-ranges = <&pic32_pinctrl 0 112 16>;
+	};
+
+	/* PORTI does not exist */
+
+	/* PORTJ */
+	gpio8: gpio8@1f860800 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860800 0x100>;
+		interrupts = <126 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <8>;
+		gpio-ranges = <&pic32_pinctrl 0 128 16>;
+	};
+
+	/* PORTK */
+	gpio9: gpio9@1f860900 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860900 0x100>;
+		interrupts = <127 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&rootclk PB4CLK>;
+		microchip,gpio-bank = <9>;
+		gpio-ranges = <&pic32_pinctrl 0 144 16>;
+	};
+
+	sdhci: sdhci@1f8ec000 {
+		compatible = "microchip,pic32mzda-sdhci";
+		reg = <0x1f8ec000 0x100>;
+		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
+		clock-names = "base_clk", "sys_clk";
+		bus-width = <4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+			<113 IRQ_TYPE_LEVEL_HIGH>,
+			<114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+
+	uart2: serial@1f822200 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822200 0x50>;
+		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
+			<146 IRQ_TYPE_LEVEL_HIGH>,
+			<147 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+
+	uart3: serial@1f822400 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822400 0x50>;
+		interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
+			<158 IRQ_TYPE_LEVEL_HIGH>,
+			<159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+
+	uart4: serial@1f822600 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822600 0x50>;
+		interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
+			<171 IRQ_TYPE_LEVEL_HIGH>,
+			<172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+
+	uart5: serial@1f822800 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822800 0x50>;
+		interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
+			<180 IRQ_TYPE_LEVEL_HIGH>,
+			<181 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+
+	uart6: serial@1f822A00 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822A00 0x50>;
+		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
+			<189 IRQ_TYPE_LEVEL_HIGH>,
+			<190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rootclk PB2CLK>;
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
new file mode 100644
index 000000000..d7fa5d55d
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda.dtsi"
+
+/ {
+	compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda";
+	model = "Microchip PIC32MZDA Starter Kit";
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk=ttyPIC1,115200n8r console=ttyPIC1,115200n8";
+	};
+
+	leds0 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		led@1 {
+			label = "pic32mzda_sk:red:led1";
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			label = "pic32mzda_sk:yellow:led2";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led@3 {
+			label = "pic32mzda_sk:green:led3";
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	keys0 {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&user_buttons_s0>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@sw1 {
+			label = "ESC";
+			linux,code = <1>;
+			gpios = <&gpio1 12 0>;
+		};
+
+		button@sw2 {
+			label = "Home";
+			linux,code = <102>;
+			gpios = <&gpio1 13 0>;
+		};
+
+		button@sw3 {
+			label = "Menu";
+			linux,code = <139>;
+			gpios = <&gpio1 14 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	status = "okay";
+	assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>,
+		<&rootclk REF5CLK>;
+	assigned-clock-rates = <50000000>, <25000000>, <40000000>;
+};
+
+&pic32_pinctrl {
+
+	pinctrl_sdhc1: sdhc1_pins0 {
+		pins = "A6", "D4", "G13", "G12", "G14", "A7", "A0";
+		microchip,digital;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pins = "H0", "H1", "H2";
+		output-low;
+		microchip,digital;
+	};
+
+	user_buttons_s0: user_buttons_s0 {
+		pins = "B12", "B13", "B14";
+		microchip,digital;
+		input-enable;
+		bias-pull-up;
+	};
+
+	pinctrl_uart2: pinctrl_uart2 {
+		uart2-tx {
+			pins = "G9";
+			function = "U2TX";
+			microchip,digital;
+			output-high;
+		};
+		uart2-rx {
+			pins = "B0";
+			function = "U2RX";
+			microchip,digital;
+			input-enable;
+		};
+	};
+
+	pinctrl_uart4: uart4-0 {
+		uart4-tx {
+			pins = "C3";
+			function = "U4TX";
+			microchip,digital;
+			output-high;
+		};
+		uart4-rx {
+			pins = "E8";
+			function = "U4RX";
+			microchip,digital;
+			input-enable;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
new file mode 100644
index 000000000..4451cf45b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# All DTBs
+dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dpt_module.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
new file mode 100644
index 000000000..61dcfa5b6
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9132";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar9132-ddr-controller",
+						"qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "ns8250";
+				reg = <0x18020000 0x20>;
+				interrupts = <3>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "uart";
+
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				no-loopback-test;
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar9132-gpio",
+						"qca,ar7100-gpio";
+				reg = <0x18040000 0x30>;
+				interrupts = <2>;
+
+				ngpios = <22>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9132-pll",
+						"qca,ar9130-pll";
+				reg = <0x18050000 0x20>;
+
+				clock-names = "ref";
+				/* The board must provides the ref clock */
+
+				#clock-cells = <1>;
+				clock-output-names = "cpu", "ddr", "ahb";
+			};
+
+			wdt: wdt@18060008 {
+				compatible = "qca,ar7130-wdt";
+				reg = <0x18060008 0x8>;
+
+				interrupts = <4>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "wdt";
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar9132-misc-intc",
+					   "qca,ar7100-misc-intc";
+				reg = <0x18060010 0x8>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar9132-reset",
+						"qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "qca,ar7100-ehci", "generic-ehci";
+			reg = <0x1b000100 0x100>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			has-transaction-translator;
+
+			phy-names = "usb";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "phy", "suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
new file mode 100644
index 000000000..7fccf6357
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+	model = "TP-Link TL-WR1043ND Version 1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	extosc: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		button@1 {
+			label = "qss";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "tp-link:green:usb";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "tp-link:green:system";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			label = "tp-link:green:qss";
+			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@3 {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&pll {
+	clocks = <&extosc>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25sl064a";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x000000 0x020000>;
+		};
+
+		partition@1 {
+			label = "firmware";
+			reg = <0x020000 0x7D0000>;
+		};
+
+		partition@2 {
+			label = "art";
+			reg = <0x7F0000 0x010000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 000000000..83b3c0ce1
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ref: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: serial@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&ref>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x100>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x8>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		eth0: ethernet@19000000 {
+			compatible = "qca,ar9330-eth";
+			reg = <0x19000000 0x200>;
+			interrupts = <4>;
+
+			resets = <&rst 9>, <&rst 22>;
+			reset-names = "mac", "mdio";
+			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+			clock-names = "eth", "mdio";
+
+			phy-mode = "mii";
+			phy-handle = <&phy_port4>;
+
+			status = "disabled";
+		};
+
+		eth1: ethernet@1a000000 {
+			compatible = "qca,ar9330-eth";
+			reg = <0x1a000000 0x200>;
+			interrupts = <5>;
+			resets = <&rst 13>, <&rst 23>;
+			reset-names = "mac", "mdio";
+			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+			clock-names = "eth", "mdio";
+
+			phy-mode = "gmii";
+
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch10: switch@10 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compatible = "qca,ar9331-switch";
+					reg = <0x10>;
+					resets = <&rst 8>;
+					reset-names = "switch";
+
+					interrupt-parent = <&miscintc>;
+					interrupts = <12>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						switch_port0: port@0 {
+							reg = <0x0>;
+							label = "cpu";
+							ethernet = <&eth1>;
+
+							phy-mode = "gmii";
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						switch_port1: port@1 {
+							reg = <0x1>;
+							phy-handle = <&phy_port0>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port2: port@2 {
+							reg = <0x2>;
+							phy-handle = <&phy_port1>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port3: port@3 {
+							reg = <0x3>;
+							phy-handle = <&phy_port2>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port4: port@4 {
+							reg = <0x4>;
+							phy-handle = <&phy_port3>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+					};
+
+					mdio {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						interrupt-parent = <&switch10>;
+
+						phy_port0: phy@0 {
+							reg = <0x0>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port1: phy@1 {
+							reg = <0x1>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port2: phy@2 {
+							reg = <0x2>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port3: phy@3 {
+							reg = <0x3>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port4: phy@4 {
+							reg = <0x4>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "chipidea,usb2";
+			reg = <0x1b000000 0x200>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			phy-names = "usb-phy";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "phy", "suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
new file mode 100644
index 000000000..7695d326d
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "DPTechnics DPT-Module";
+	compatible = "dptechnics,dpt-module";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
new file mode 100644
index 000000000..d38aa73f1
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Dragino MS14 (Dragino 2)";
+	compatible = "dragino,ms14";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "dragino2:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "dragino2:red:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wan {
+			label = "dragino2:red:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		system {
+			label = "dragino2:red:system";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "jumpstart";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128BVFG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
new file mode 100644
index 000000000..11778abac
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Onion Omega";
+	compatible = "onion,omega";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "onion:amber:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
new file mode 100644
index 000000000..c8290d36c
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "TP-Link TL-MR3020";
+	compatible = "tplink,tl-mr3020";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wps {
+			label = "tp-link:green:wps";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3g {
+			label = "tp-link:green:3g";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@1 {
+			label = "sw1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Spansion S25FL032PIF SPI flash */
+	spiflash: s25sl032p@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25sl032p", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
new file mode 100644
index 000000000..6c26dfa0a
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_RT2880_EVAL)	+= rt2880_eval.dtb
+dtb-$(CONFIG_DTB_RT305X_EVAL)	+= rt3052_eval.dtb
+dtb-$(CONFIG_DTB_RT3883_EVAL)	+= rt3883_eval.dtb
+dtb-$(CONFIG_DTB_MT7620A_EVAL)	+= mt7620a_eval.dtb
+dtb-$(CONFIG_DTB_OMEGA2P)	+= omega2p.dtb
+dtb-$(CONFIG_DTB_VOCORE2)	+= vocore2.dtb
+
+obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
new file mode 100644
index 000000000..6069b33cf
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
+		     "ralink,mt7628a-soc";
+	model = "GARDENA smart Gateway (MT7688)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_gpio_gpio>;	/* GPIO11 */
+
+		user_btn1 {
+			label = "USER_BTN1";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code =<KEY_PROG1> ;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_pwm0_gpio>,	/* GPIO18 */
+			    <&pinmux_pwm1_gpio>,	/* GPIO19 */
+			    <&pinmux_sdmode_gpio>,	/* GPIO22..29 */
+			    <&pinmux_p0led_an_gpio>;	/* GPIO43 */
+		/*
+		 * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
+		 * well for GPIO3. But this is already claimed for uart1
+		 * (see below). So we can't include it in this LED node.
+		 */
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet_link {
+			label = "smartgw:eth:link";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+
+		ethernet_activity {
+			label = "smartgw:eth:act";
+			gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&i2c {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0xa0000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "uboot_env0";
+				reg = <0xa0000 0x10000>;
+			};
+
+			partition@b0000 {
+				label = "uboot_env1";
+				reg = <0xb0000 0x10000>;
+			};
+
+			factory: partition@c0000 {
+				label = "factory";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+
+	nand_flash@1 {
+		compatible = "spi-nand";
+		linux,mtd-name = "gd5f";
+		reg = <1>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2s_gpio>;		/* GPIO0..3 */
+
+	fifo-size = <8>;
+	tx-threshold = <8>;
+
+	rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_p2led_an_gpio>,	/* GPIO41 */
+		    <&pinmux_p3led_an_gpio>;	/* GPIO40 */
+
+	rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
new file mode 100644
index 000000000..1f6e5320f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mtk7620a-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+                ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
new file mode 100644
index 000000000..8de8f89f3
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+	model = "Ralink MT7620A evaluation board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
new file mode 100644
index 000000000..892e8ab86
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mt7628a-soc";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mti,mips24KEc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	resetc: reset-controller {
+		compatible = "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc: system-controller@0 {
+			compatible = "ralink,mt7620a-sysc", "syscon";
+			reg = <0x0 0x60>;
+		};
+
+		pinmux: pinmux@60 {
+			compatible = "pinctrl-single";
+			reg = <0x60 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x1>;
+
+			pinmux_gpio_gpio: pinmux_gpio_gpio {
+				pinctrl-single,bits = <0x0 0x0 0x3>;
+			};
+
+			pinmux_spi_cs1_cs: pinmux_spi_cs1_cs {
+				pinctrl-single,bits = <0x0 0x0 0x30>;
+			};
+
+			pinmux_i2s_gpio: pinmux_i2s_gpio {
+				pinctrl-single,bits = <0x0 0x40 0xc0>;
+			};
+
+			pinmux_uart0_uart: pinmux_uart0_uart0 {
+				pinctrl-single,bits = <0x0 0x0 0x300>;
+			};
+
+			pinmux_sdmode_sdxc: pinmux_sdmode_sdxc {
+				pinctrl-single,bits = <0x0 0x0 0xc00>;
+			};
+
+			pinmux_sdmode_gpio: pinmux_sdmode_gpio {
+				pinctrl-single,bits = <0x0 0x400 0xc00>;
+			};
+
+			pinmux_spi_spi: pinmux_spi_spi {
+				pinctrl-single,bits = <0x0 0x0 0x1000>;
+			};
+
+			pinmux_refclk_gpio: pinmux_refclk_gpio {
+				pinctrl-single,bits = <0x0 0x40000 0x40000>;
+			};
+
+			pinmux_i2c_i2c: pinmux_i2c_i2c {
+				pinctrl-single,bits = <0x0 0x0 0x300000>;
+			};
+
+			pinmux_uart1_uart: pinmux_uart1_uart1 {
+				pinctrl-single,bits = <0x0 0x0 0x3000000>;
+			};
+
+			pinmux_uart2_uart: pinmux_uart2_uart {
+				pinctrl-single,bits = <0x0 0x0 0xc000000>;
+			};
+
+			pinmux_pwm0_pwm: pinmux_pwm0_pwm {
+				pinctrl-single,bits = <0x0 0x0 0x30000000>;
+			};
+
+			pinmux_pwm0_gpio: pinmux_pwm0_gpio {
+				pinctrl-single,bits = <0x0 0x10000000
+						       0x30000000>;
+			};
+
+			pinmux_pwm1_pwm: pinmux_pwm1_pwm {
+				pinctrl-single,bits = <0x0 0x0 0xc0000000>;
+			};
+
+			pinmux_pwm1_gpio: pinmux_pwm1_gpio {
+				pinctrl-single,bits = <0x0 0x40000000
+						       0xc0000000>;
+			};
+
+			pinmux_p0led_an_gpio: pinmux_p0led_an_gpio {
+				pinctrl-single,bits = <0x4 0x4 0xc>;
+			};
+
+			pinmux_p1led_an_gpio: pinmux_p1led_an_gpio {
+				pinctrl-single,bits = <0x4 0x10 0x30>;
+			};
+
+			pinmux_p2led_an_gpio: pinmux_p2led_an_gpio {
+				pinctrl-single,bits = <0x4 0x40 0xc0>;
+			};
+
+			pinmux_p3led_an_gpio: pinmux_p3led_an_gpio {
+				pinctrl-single,bits = <0x4 0x100 0x300>;
+			};
+
+			pinmux_p4led_an_gpio: pinmux_p4led_an_gpio {
+				pinctrl-single,bits = <0x4 0x400 0xc00>;
+			};
+		};
+
+		watchdog: watchdog@100 {
+			compatible = "mediatek,mt7621-wdt";
+			reg = <0x100 0x30>;
+
+			resets = <&resetc 8>;
+			reset-names = "wdt";
+
+			interrupt-parent = <&intc>;
+			interrupts = <24>;
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@200 {
+			compatible = "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			resets = <&resetc 9>;
+			reset-names = "intc";
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+
+			ralink,intc-registers = <0x9c 0xa0
+						 0x6c 0xa4
+						 0x80 0x78>;
+		};
+
+		memory-controller@300 {
+			compatible = "ralink,mt7620a-memc";
+			reg = <0x300 0x100>;
+		};
+
+		gpio: gpio@600 {
+			compatible = "mediatek,mt7621-gpio";
+			reg = <0x600 0x100>;
+
+			gpio-controller;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <6>;
+		};
+
+		spi: spi@b00 {
+			compatible = "ralink,mt7621-spi";
+			reg = <0xb00 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_spi_spi>;
+
+			resets = <&resetc 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c: i2c@900 {
+			compatible = "mediatek,mt7621-i2c";
+			reg = <0x900 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_i2c_i2c>;
+
+			resets = <&resetc 16>;
+			reset-names = "i2c";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		uart0: uartlite@c00 {
+			compatible = "ns16550a";
+			reg = <0xc00 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart0_uart>;
+
+			resets = <&resetc 12>;
+			reset-names = "uart0";
+
+			interrupt-parent = <&intc>;
+			interrupts = <20>;
+
+			reg-shift = <2>;
+		};
+
+		uart1: uart1@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1_uart>;
+
+			resets = <&resetc 19>;
+			reset-names = "uart1";
+
+			interrupt-parent = <&intc>;
+			interrupts = <21>;
+
+			reg-shift = <2>;
+		};
+
+		uart2: uart2@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart2_uart>;
+
+			resets = <&resetc 20>;
+			reset-names = "uart2";
+
+			interrupt-parent = <&intc>;
+			interrupts = <22>;
+
+			reg-shift = <2>;
+		};
+	};
+
+	usb_phy: usb-phy@10120000 {
+		compatible = "mediatek,mt7628-usbphy";
+		reg = <0x10120000 0x1000>;
+
+		#phy-cells = <0>;
+
+		ralink,sysctl = <&sysc>;
+		resets = <&resetc 22 &resetc 25>;
+		reset-names = "host", "device";
+	};
+
+	ehci@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		phys = <&usb_phy>;
+		phy-names = "usb";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+
+	wmac: wmac@10300000 {
+		compatible = "mediatek,mt7628-wmac";
+		reg = <0x10300000 0x100000>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/omega2p.dts b/arch/mips/boot/dts/ralink/omega2p.dts
new file mode 100644
index 000000000..5884fd48f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/omega2p.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+/ {
+	compatible = "onion,omega2+", "ralink,mt7688a-soc", "ralink,mt7628a-soc";
+	model = "Onion Omega2+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
new file mode 100644
index 000000000..8fc1987d9
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt2880-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips4KEc";
+		};
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@300000 {
+		compatible = "palmbus";
+		reg = <0x300000 0x200000>;
+                ranges = <0x0 0x300000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt2880-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt2880-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <8>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
new file mode 100644
index 000000000..759bc1dd5
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt2880_eval.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+	model = "Ralink RT2880 evaluation board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x8000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x400000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+		partition@30000 {
+			label = "uboot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "calibration";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+		partition@50000 {
+			label = "linux";
+			reg = <0x50000 0x3b0000>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
new file mode 100644
index 000000000..23062333a
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips24KEc";
+		};
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+
+	usb@101c0000 {
+		compatible = "ralink,rt3050-usb", "snps,dwc2";
+		reg = <0x101c0000 40000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts
new file mode 100644
index 000000000..6408ff629
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3052_eval.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+/ {
+	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+	model = "Ralink RT3052 evaluation board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+		partition@30000 {
+			label = "uboot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "calibration";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+		partition@50000 {
+			label = "linux";
+			reg = <0x50000 0x7b0000>;
+		};
+	};
+
+	usb@101c0000 {
+		status = "okay";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
new file mode 100644
index 000000000..61132cf15
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,rt3883-soc";
+
+	cpus {
+		cpu@0 {
+			compatible = "mips,mips74Kc";
+		};
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+		};
+
+		memc@300 {
+			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+			reg = <0xc00 0x100>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+
+			reg-shift = <2>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
new file mode 100644
index 000000000..c22bc84df
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3883_eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
+	model = "Ralink RT3883 evaluation board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+};
diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts
new file mode 100644
index 000000000..fa8a5f8f2
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/vocore2.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+
+/ {
+	compatible = "vocore,vocore2", "ralink,mt7628a-soc";
+	model = "VoCore2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS2,115200";
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
new file mode 100644
index 000000000..69ca00590
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= nexys4ddr.dtb
diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
new file mode 100644
index 000000000..87b2b1f9a
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,xilfpga";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
new file mode 100644
index 000000000..cc8dbea09
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+	compatible = "digilent,nexys4ddr";
+
+	aliases {
+		serial0 = &axi_uart16550;
+	};
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	axi_intc: interrupt-controller@10200000 {
+		#interrupt-cells = <1>;
+		compatible = "xlnx,xps-intc-1.00.a";
+		interrupt-controller;
+		reg = <0x10200000 0x10000>;
+		xlnx,kind-of-intr = <0x0>;
+		xlnx,num-intr-inputs = <0x6>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+	};
+
+	axi_gpio: gpio@10600000 {
+		#gpio-cells = <1>;
+		compatible = "xlnx,xps-gpio-1.00.a";
+		gpio-controller;
+		reg = <0x10600000 0x10000>;
+		xlnx,all-inputs = <0x0>;
+		xlnx,dout-default = <0x0>;
+		xlnx,gpio-width = <0x16>;
+		xlnx,interrupt-present = <0x0>;
+		xlnx,is-dual = <0x0>;
+		xlnx,tri-default = <0xffffffff>;
+	} ;
+
+	axi_ethernetlite: ethernet@10e00000 {
+		compatible = "xlnx,xps-ethernetlite-3.00.a";
+		device_type = "network";
+		interrupt-parent = <&axi_intc>;
+		interrupts = <1>;
+		phy-handle = <&phy0>;
+		reg = <0x10e00000 0x10000>;
+		xlnx,duplex = <0x1>;
+		xlnx,include-global-buffers = <0x1>;
+		xlnx,include-internal-loopback = <0x0>;
+		xlnx,include-mdio = <0x1>;
+		xlnx,instance = "axi_ethernetlite_inst";
+		xlnx,rx-ping-pong = <0x1>;
+		xlnx,s-axi-id-width = <0x1>;
+		xlnx,tx-ping-pong = <0x1>;
+		xlnx,use-internal = <0x0>;
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
+		};
+	};
+
+	axi_uart16550: serial@10400000 {
+		compatible = "ns16550a";
+		reg = <0x10400000 0x10000>;
+
+		reg-shift = <2>;
+		reg-offset = <0x1000>;
+
+		clocks	= <&ext>;
+
+		interrupt-parent = <&axi_intc>;
+		interrupts = <0>;
+	};
+
+	axi_i2c: i2c@10a00000 {
+	    compatible = "xlnx,xps-iic-2.00.a";
+	    interrupt-parent = <&axi_intc>;
+	    interrupts = <4>;
+	    reg = < 0x10a00000 0x10000 >;
+	    clocks = <&ext>;
+	    xlnx,clk-freq = <0x5f5e100>;
+	    xlnx,family = "Artix7";
+	    xlnx,gpo-width = <0x1>;
+	    xlnx,iic-freq = <0x186a0>;
+	    xlnx,scl-inertial-delay = <0x0>;
+	    xlnx,sda-inertial-delay = <0x0>;
+	    xlnx,ten-bit-adr = <0x0>;
+	    #address-cells = <1>;
+	    #size-cells = <0>;
+
+	    ad7420@4b {
+		compatible = "adi,adt7420";
+		reg = <0x4b>;
+	    };
+	} ;
+};
+
+&ext {
+	clock-frequency = <50000000>;
+};