Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

152 files changed, 53000 insertions, 0 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 000000000..807c5320d
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,310 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menu "Firmware Drivers"
+
+config ARM_SCMI_PROTOCOL
+	tristate "ARM System Control and Management Interface (SCMI) Message Protocol"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on MAILBOX || HAVE_ARM_SMCCC_DISCOVERY
+	help
+	  ARM System Control and Management Interface (SCMI) protocol is a
+	  set of operating system-independent software interfaces that are
+	  used in system management. SCMI is extensible and currently provides
+	  interfaces for: Discovery and self-description of the interfaces
+	  it supports, Power domain management which is the ability to place
+	  a given device or domain into the various power-saving states that
+	  it supports, Performance management which is the ability to control
+	  the performance of a domain that is composed of compute engines
+	  such as application processors and other accelerators, Clock
+	  management which is the ability to set and inquire rates on platform
+	  managed clocks and Sensor management which is the ability to read
+	  sensor data, and be notified of sensor value.
+
+	  This protocol library provides interface for all the client drivers
+	  making use of the features offered by the SCMI.
+
+config ARM_SCMI_POWER_DOMAIN
+	tristate "SCMI power domain driver"
+	depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCMI power domains which can be
+	  enabled or disabled via the SCP firmware
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called scmi_pm_domain. Note this may needed early in boot
+	  before rootfs may be available.
+
+config ARM_SCPI_PROTOCOL
+	tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on MAILBOX
+	help
+	  System Control and Power Interface (SCPI) Message Protocol is
+	  defined for the purpose of communication between the Application
+	  Cores(AP) and the System Control Processor(SCP). The MHU peripheral
+	  provides a mechanism for inter-processor communication between SCP
+	  and AP.
+
+	  SCP controls most of the power managament on the Application
+	  Processors. It offers control and management of: the core/cluster
+	  power states, various power domain DVFS including the core/cluster,
+	  certain system clocks configuration, thermal sensors and many
+	  others.
+
+	  This protocol library provides interface for all the client drivers
+	  making use of the features offered by the SCP.
+
+config ARM_SCPI_POWER_DOMAIN
+	tristate "SCPI power domain driver"
+	depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
+	default y
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for the SCPI power domains which can be
+	  enabled or disabled via the SCP firmware
+
+config ARM_SDE_INTERFACE
+	bool "ARM Software Delegated Exception Interface (SDEI)"
+	depends on ARM64
+	depends on ACPI_APEI_GHES
+	help
+	  The Software Delegated Exception Interface (SDEI) is an ARM
+	  standard for registering callbacks from the platform firmware
+	  into the OS. This is typically used to implement RAS notifications.
+
+config EDD
+	tristate "BIOS Enhanced Disk Drive calls determine boot disk"
+	depends on X86
+	help
+	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+	  Services real mode BIOS calls to determine which disk
+	  BIOS tries boot from.  This information is then exported via sysfs.
+
+	  This option is experimental and is known to fail to boot on some
+          obscure configurations. Most disk controller BIOS vendors do
+          not yet implement this feature.
+
+config EDD_OFF
+	bool "Sets default behavior for EDD detection to off"
+	depends on EDD
+	default n
+	help
+	  Say Y if you want EDD disabled by default, even though it is compiled into the
+	  kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
+	  using the kernel parameter 'edd={on|skipmbr|off}'.
+
+config FIRMWARE_MEMMAP
+    bool "Add firmware-provided memory map to sysfs" if EXPERT
+    default X86
+    help
+      Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
+      That memory map is used for example by kexec to set up parameter area
+      for the next kernel, but can also be used for debugging purposes.
+
+      See also Documentation/ABI/testing/sysfs-firmware-memmap.
+
+config EFI_PCDP
+	bool "Console device selection via EFI PCDP or HCDP table"
+	depends on ACPI && EFI && IA64
+	default y if IA64
+	help
+	  If your firmware supplies the PCDP table, and you want to
+	  automatically use the primary console device it describes
+	  as the Linux console, say Y here.
+
+	  If your firmware supplies the HCDP table, and you want to
+	  use the first serial port it describes as the Linux console,
+	  say Y here.  If your EFI ConOut path contains only a UART
+	  device, it will become the console automatically.  Otherwise,
+	  you must specify the "console=hcdp" kernel boot argument.
+
+	  Neither the PCDP nor the HCDP affects naming of serial devices,
+	  so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
+	  on how the driver discovers devices.
+
+	  You must also enable the appropriate drivers (serial, VGA, etc.)
+
+	  See DIG64_HCDPv20_042804.pdf available from
+	  <http://www.dig64.org/specifications/> 
+
+config DMIID
+    bool "Export DMI identification via sysfs to userspace"
+    depends on DMI
+    default y
+	help
+	  Say Y here if you want to query SMBIOS/DMI system identification
+	  information from userspace through /sys/class/dmi/id/ or if you want
+	  DMI-based module auto-loading.
+
+config DMI_SYSFS
+	tristate "DMI table support in sysfs"
+	depends on SYSFS && DMI
+	default n
+	help
+	  Say Y or M here to enable the exporting of the raw DMI table
+	  data via sysfs.  This is useful for consuming the data without
+	  requiring any access to /dev/mem at all.  Tables are found
+	  under /sys/firmware/dmi when this option is enabled and
+	  loaded.
+
+config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
+	bool
+
+config ISCSI_IBFT_FIND
+	bool "iSCSI Boot Firmware Table Attributes"
+	depends on X86 && ISCSI_IBFT
+	default n
+	help
+	  This option enables the kernel to find the region of memory
+	  in which the ISCSI Boot Firmware Table (iBFT) resides. This
+	  is necessary for iSCSI Boot Firmware Table Attributes module to work
+	  properly.
+
+config ISCSI_IBFT
+	tristate "iSCSI Boot Firmware Table Attributes module"
+	select ISCSI_BOOT_SYSFS
+	select ISCSI_IBFT_FIND if X86
+	depends on ACPI && SCSI && SCSI_LOWLEVEL
+	default	n
+	help
+	  This option enables support for detection and exposing of iSCSI
+	  Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
+	  detect iSCSI boot parameters dynamically during system boot, say Y.
+	  Otherwise, say N.
+
+config RASPBERRYPI_FIRMWARE
+	tristate "Raspberry Pi Firmware Driver"
+	depends on BCM2835_MBOX
+	help
+	  This option enables support for communicating with the firmware on the
+	  Raspberry Pi.
+
+config FW_CFG_SYSFS
+	tristate "QEMU fw_cfg device support in sysfs"
+	depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86)
+	depends on HAS_IOPORT_MAP
+	default n
+	help
+	  Say Y or M here to enable the exporting of the QEMU firmware
+	  configuration (fw_cfg) file entries via sysfs. Entries are
+	  found under /sys/firmware/fw_cfg when this option is enabled
+	  and loaded.
+
+config FW_CFG_SYSFS_CMDLINE
+	bool "QEMU fw_cfg device parameter parsing"
+	depends on FW_CFG_SYSFS
+	help
+	  Allow the qemu_fw_cfg device to be initialized via the kernel
+	  command line or using a module parameter.
+	  WARNING: Using incorrect parameters (base address in particular)
+	  may crash your system.
+
+config INTEL_STRATIX10_SERVICE
+	tristate "Intel Stratix10 Service Layer"
+	depends on (ARCH_STRATIX10 || ARCH_AGILEX) && HAVE_ARM_SMCCC
+	default n
+	help
+	  Intel Stratix10 service layer runs at privileged exception level,
+	  interfaces with the service providers (FPGA manager is one of them)
+	  and manages secure monitor call to communicate with secure monitor
+	  software at secure monitor exception level.
+
+	  Say Y here if you want Stratix10 service layer support.
+
+config INTEL_STRATIX10_RSU
+	tristate "Intel Stratix10 Remote System Update"
+	depends on INTEL_STRATIX10_SERVICE
+	help
+	  The Intel Remote System Update (RSU) driver exposes interfaces
+	  access through the Intel Service Layer to user space via sysfs
+	  device attribute nodes. The RSU interfaces report/control some of
+	  the optional RSU features of the Stratix 10 SoC FPGA.
+
+	  The RSU provides a way for customers to update the boot
+	  configuration of a Stratix 10 SoC device with significantly reduced
+	  risk of corrupting the bitstream storage and bricking the system.
+
+	  Enable RSU support if you are using an Intel SoC FPGA with the RSU
+	  feature enabled and you want Linux user space control.
+
+	  Say Y here if you want Intel RSU support.
+
+config QCOM_SCM
+	bool
+	depends on ARM || ARM64
+	depends on HAVE_ARM_SMCCC
+	select RESET_CONTROLLER
+
+config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
+	bool "Qualcomm download mode enabled by default"
+	depends on QCOM_SCM
+	help
+	  A device with "download mode" enabled will upon an unexpected
+	  warm-restart enter a special debug mode that allows the user to
+	  "download" memory content over USB for offline postmortem analysis.
+	  The feature can be enabled/disabled on the kernel command line.
+
+	  Say Y here to enable "download mode" by default.
+
+config TI_SCI_PROTOCOL
+	tristate "TI System Control Interface (TISCI) Message Protocol"
+	depends on TI_MESSAGE_MANAGER
+	help
+	  TI System Control Interface (TISCI) Message Protocol is used to manage
+	  compute systems such as ARM, DSP etc with the system controller in
+	  complex System on Chip(SoC) such as those found on certain keystone
+	  generation SoC from TI.
+
+	  System controller provides various facilities including power
+	  management function support.
+
+	  This protocol library is used by client drivers to use the features
+	  provided by the system controller.
+
+config TRUSTED_FOUNDATIONS
+	bool "Trusted Foundations secure monitor support"
+	depends on ARM && CPU_V7
+	help
+	  Some devices (including most early Tegra-based consumer devices on
+	  the market) are booted with the Trusted Foundations secure monitor
+	  active, requiring some core operations to be performed by the secure
+	  monitor instead of the kernel.
+
+	  This option allows the kernel to invoke the secure monitor whenever
+	  required on devices using Trusted Foundations. See the functions and
+	  comments in linux/firmware/trusted_foundations.h or the device tree
+	  bindings for "tlm,trusted-foundations" for details on how to use it.
+
+	  Choose N if you don't know what this is about.
+
+config TURRIS_MOX_RWTM
+	tristate "Turris Mox rWTM secure firmware driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_DMA && OF
+	depends on MAILBOX
+	select HW_RANDOM
+	select ARMADA_37XX_RWTM_MBOX
+	help
+	  This driver communicates with the firmware on the Cortex-M3 secure
+	  processor of the Turris Mox router. Enable if you are building for
+	  Turris Mox, and you will be able to read the device serial number and
+	  other manufacturing data and also utilize the Entropy Bit Generator
+	  for hardware random number generation.
+
+source "drivers/firmware/broadcom/Kconfig"
+source "drivers/firmware/google/Kconfig"
+source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/imx/Kconfig"
+source "drivers/firmware/meson/Kconfig"
+source "drivers/firmware/psci/Kconfig"
+source "drivers/firmware/smccc/Kconfig"
+source "drivers/firmware/tegra/Kconfig"
+source "drivers/firmware/xilinx/Kconfig"
+
+endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
new file mode 100644
index 000000000..5e013b6a3
--- /dev/null
+++ b/drivers/firmware/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+obj-$(CONFIG_ARM_SCPI_PROTOCOL)	+= arm_scpi.o
+obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
+obj-$(CONFIG_ARM_SDE_INTERFACE)	+= arm_sdei.o
+obj-$(CONFIG_DMI)		+= dmi_scan.o
+obj-$(CONFIG_DMI_SYSFS)		+= dmi-sysfs.o
+obj-$(CONFIG_EDD)		+= edd.o
+obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
+obj-$(CONFIG_DMIID)		+= dmi-id.o
+obj-$(CONFIG_INTEL_STRATIX10_SERVICE) += stratix10-svc.o
+obj-$(CONFIG_INTEL_STRATIX10_RSU)     += stratix10-rsu.o
+obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
+obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
+obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
+obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
+obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
+obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
+obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
+
+obj-y				+= arm_scmi/
+obj-y				+= broadcom/
+obj-y				+= meson/
+obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
+obj-$(CONFIG_EFI)		+= efi/
+obj-$(CONFIG_UEFI_CPER)		+= efi/
+obj-y				+= imx/
+obj-y				+= psci/
+obj-y				+= smccc/
+obj-y				+= tegra/
+obj-y				+= xilinx/
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
new file mode 100644
index 000000000..bc0d54f8e
--- /dev/null
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+scmi-bus-y = bus.o
+scmi-driver-y = driver.o notify.o
+scmi-transport-y = shmem.o
+scmi-transport-$(CONFIG_MAILBOX) += mailbox.o
+scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o
+scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o
+scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
+		    $(scmi-transport-y)
+obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
+obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
new file mode 100644
index 000000000..e51d28ba2
--- /dev/null
+++ b/drivers/firmware/arm_scmi/base.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Base Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications BASE - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+#define SCMI_BASE_NUM_SOURCES		1
+#define SCMI_BASE_MAX_CMD_ERR_COUNT	1024
+
+enum scmi_base_protocol_cmd {
+	BASE_DISCOVER_VENDOR = 0x3,
+	BASE_DISCOVER_SUB_VENDOR = 0x4,
+	BASE_DISCOVER_IMPLEMENT_VERSION = 0x5,
+	BASE_DISCOVER_LIST_PROTOCOLS = 0x6,
+	BASE_DISCOVER_AGENT = 0x7,
+	BASE_NOTIFY_ERRORS = 0x8,
+	BASE_SET_DEVICE_PERMISSIONS = 0x9,
+	BASE_SET_PROTOCOL_PERMISSIONS = 0xa,
+	BASE_RESET_AGENT_CONFIGURATION = 0xb,
+};
+
+struct scmi_msg_resp_base_attributes {
+	u8 num_protocols;
+	u8 num_agents;
+	__le16 reserved;
+};
+
+struct scmi_msg_base_error_notify {
+	__le32 event_control;
+#define BASE_TP_NOTIFY_ALL	BIT(0)
+};
+
+struct scmi_base_error_notify_payld {
+	__le32 agent_id;
+	__le32 error_status;
+#define IS_FATAL_ERROR(x)	((x) & BIT(31))
+#define ERROR_CMD_COUNT(x)	FIELD_GET(GENMASK(9, 0), (x))
+	__le64 msg_reports[SCMI_BASE_MAX_CMD_ERR_COUNT];
+};
+
+/**
+ * scmi_base_attributes_get() - gets the implementation details
+ *	that are associated with the base protocol.
+ *
+ * @handle: SCMI entity handle
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_attributes_get(const struct scmi_handle *handle)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_base_attributes *attr_info;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_BASE, 0, sizeof(*attr_info), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		attr_info = t->rx.buf;
+		rev->num_protocols = attr_info->num_protocols;
+		rev->num_agents = attr_info->num_agents;
+	}
+
+	scmi_xfer_put(handle, t);
+
+	return ret;
+}
+
+/**
+ * scmi_base_vendor_id_get() - gets vendor/subvendor identifier ASCII string.
+ *
+ * @handle: SCMI entity handle
+ * @sub_vendor: specify true if sub-vendor ID is needed
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int
+scmi_base_vendor_id_get(const struct scmi_handle *handle, bool sub_vendor)
+{
+	u8 cmd;
+	int ret, size;
+	char *vendor_id;
+	struct scmi_xfer *t;
+	struct scmi_revision_info *rev = handle->version;
+
+	if (sub_vendor) {
+		cmd = BASE_DISCOVER_SUB_VENDOR;
+		vendor_id = rev->sub_vendor_id;
+		size = ARRAY_SIZE(rev->sub_vendor_id);
+	} else {
+		cmd = BASE_DISCOVER_VENDOR;
+		vendor_id = rev->vendor_id;
+		size = ARRAY_SIZE(rev->vendor_id);
+	}
+
+	ret = scmi_xfer_get_init(handle, cmd, SCMI_PROTOCOL_BASE, 0, size, &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		memcpy(vendor_id, t->rx.buf, size);
+
+	scmi_xfer_put(handle, t);
+
+	return ret;
+}
+
+/**
+ * scmi_base_implementation_version_get() - gets a vendor-specific
+ *	implementation 32-bit version. The format of the version number is
+ *	vendor-specific
+ *
+ * @handle: SCMI entity handle
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int
+scmi_base_implementation_version_get(const struct scmi_handle *handle)
+{
+	int ret;
+	__le32 *impl_ver;
+	struct scmi_xfer *t;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_xfer_get_init(handle, BASE_DISCOVER_IMPLEMENT_VERSION,
+				 SCMI_PROTOCOL_BASE, 0, sizeof(*impl_ver), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		impl_ver = t->rx.buf;
+		rev->impl_ver = le32_to_cpu(*impl_ver);
+	}
+
+	scmi_xfer_put(handle, t);
+
+	return ret;
+}
+
+/**
+ * scmi_base_implementation_list_get() - gets the list of protocols it is
+ *	OSPM is allowed to access
+ *
+ * @handle: SCMI entity handle
+ * @protocols_imp: pointer to hold the list of protocol identifiers
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_implementation_list_get(const struct scmi_handle *handle,
+					     u8 *protocols_imp)
+{
+	u8 *list;
+	int ret, loop;
+	struct scmi_xfer *t;
+	__le32 *num_skip, *num_ret;
+	u32 tot_num_ret = 0, loop_num_ret;
+	struct device *dev = handle->dev;
+
+	ret = scmi_xfer_get_init(handle, BASE_DISCOVER_LIST_PROTOCOLS,
+				 SCMI_PROTOCOL_BASE, sizeof(*num_skip), 0, &t);
+	if (ret)
+		return ret;
+
+	num_skip = t->tx.buf;
+	num_ret = t->rx.buf;
+	list = t->rx.buf + sizeof(*num_ret);
+
+	do {
+		/* Set the number of protocols to be skipped/already read */
+		*num_skip = cpu_to_le32(tot_num_ret);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		loop_num_ret = le32_to_cpu(*num_ret);
+		if (loop_num_ret > MAX_PROTOCOLS_IMP - tot_num_ret) {
+			dev_err(dev, "No. of Protocol > MAX_PROTOCOLS_IMP");
+			break;
+		}
+
+		for (loop = 0; loop < loop_num_ret; loop++)
+			protocols_imp[tot_num_ret + loop] = *(list + loop);
+
+		tot_num_ret += loop_num_ret;
+
+		scmi_reset_rx_to_maxsz(handle, t);
+	} while (loop_num_ret);
+
+	scmi_xfer_put(handle, t);
+
+	return ret;
+}
+
+/**
+ * scmi_base_discover_agent_get() - discover the name of an agent
+ *
+ * @handle: SCMI entity handle
+ * @id: Agent identifier
+ * @name: Agent identifier ASCII string
+ *
+ * An agent id of 0 is reserved to identify the platform itself.
+ * Generally operating system is represented as "OSPM"
+ *
+ * Return: 0 on success, else appropriate SCMI error.
+ */
+static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
+					int id, char *name)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, BASE_DISCOVER_AGENT,
+				 SCMI_PROTOCOL_BASE, sizeof(__le32),
+				 SCMI_MAX_STR_SIZE, &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(id, t->tx.buf);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		strlcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
+
+	scmi_xfer_put(handle, t);
+
+	return ret;
+}
+
+static int scmi_base_error_notify(const struct scmi_handle *handle, bool enable)
+{
+	int ret;
+	u32 evt_cntl = enable ? BASE_TP_NOTIFY_ALL : 0;
+	struct scmi_xfer *t;
+	struct scmi_msg_base_error_notify *cfg;
+
+	ret = scmi_xfer_get_init(handle, BASE_NOTIFY_ERRORS,
+				 SCMI_PROTOCOL_BASE, sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->event_control = cpu_to_le32(evt_cntl);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_base_set_notify_enabled(const struct scmi_handle *handle,
+					u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_base_error_notify(handle, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] ret:%d\n", evt_id, ret);
+
+	return ret;
+}
+
+static void *scmi_base_fill_custom_report(const struct scmi_handle *handle,
+					  u8 evt_id, ktime_t timestamp,
+					  const void *payld, size_t payld_sz,
+					  void *report, u32 *src_id)
+{
+	int i;
+	const struct scmi_base_error_notify_payld *p = payld;
+	struct scmi_base_error_report *r = report;
+
+	/*
+	 * BaseError notification payload is variable in size but
+	 * up to a maximum length determined by the struct ponted by p.
+	 * Instead payld_sz is the effective length of this notification
+	 * payload so cannot be greater of the maximum allowed size as
+	 * pointed by p.
+	 */
+	if (evt_id != SCMI_EVENT_BASE_ERROR_EVENT || sizeof(*p) < payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->fatal = IS_FATAL_ERROR(le32_to_cpu(p->error_status));
+	r->cmd_count = ERROR_CMD_COUNT(le32_to_cpu(p->error_status));
+	for (i = 0; i < r->cmd_count; i++)
+		r->reports[i] = le64_to_cpu(p->msg_reports[i]);
+	*src_id = 0;
+
+	return r;
+}
+
+static const struct scmi_event base_events[] = {
+	{
+		.id = SCMI_EVENT_BASE_ERROR_EVENT,
+		.max_payld_sz = sizeof(struct scmi_base_error_notify_payld),
+		.max_report_sz = sizeof(struct scmi_base_error_report) +
+				  SCMI_BASE_MAX_CMD_ERR_COUNT * sizeof(u64),
+	},
+};
+
+static const struct scmi_event_ops base_event_ops = {
+	.set_notify_enabled = scmi_base_set_notify_enabled,
+	.fill_custom_report = scmi_base_fill_custom_report,
+};
+
+int scmi_base_protocol_init(struct scmi_handle *h)
+{
+	int id, ret;
+	u8 *prot_imp;
+	u32 version;
+	char name[SCMI_MAX_STR_SIZE];
+	const struct scmi_handle *handle = h;
+	struct device *dev = handle->dev;
+	struct scmi_revision_info *rev = handle->version;
+
+	ret = scmi_version_get(handle, SCMI_PROTOCOL_BASE, &version);
+	if (ret)
+		return ret;
+
+	prot_imp = devm_kcalloc(dev, MAX_PROTOCOLS_IMP, sizeof(u8), GFP_KERNEL);
+	if (!prot_imp)
+		return -ENOMEM;
+
+	rev->major_ver = PROTOCOL_REV_MAJOR(version),
+	rev->minor_ver = PROTOCOL_REV_MINOR(version);
+
+	scmi_base_attributes_get(handle);
+	scmi_base_vendor_id_get(handle, false);
+	scmi_base_vendor_id_get(handle, true);
+	scmi_base_implementation_version_get(handle);
+	scmi_base_implementation_list_get(handle, prot_imp);
+	scmi_setup_protocol_implemented(handle, prot_imp);
+
+	dev_info(dev, "SCMI Protocol v%d.%d '%s:%s' Firmware version 0x%x\n",
+		 rev->major_ver, rev->minor_ver, rev->vendor_id,
+		 rev->sub_vendor_id, rev->impl_ver);
+	dev_dbg(dev, "Found %d protocol(s) %d agent(s)\n", rev->num_protocols,
+		rev->num_agents);
+
+	scmi_register_protocol_events(handle, SCMI_PROTOCOL_BASE,
+				      (4 * SCMI_PROTO_QUEUE_SZ),
+				      &base_event_ops, base_events,
+				      ARRAY_SIZE(base_events),
+				      SCMI_BASE_NUM_SOURCES);
+
+	for (id = 0; id < rev->num_agents; id++) {
+		scmi_base_discover_agent_get(handle, id, name);
+		dev_dbg(dev, "Agent %d: %s\n", id, name);
+	}
+
+	return 0;
+}
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
new file mode 100644
index 000000000..def8a84d1
--- /dev/null
+++ b/drivers/firmware/arm_scmi/bus.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Protocol bus layer
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include "common.h"
+
+static DEFINE_IDA(scmi_bus_id);
+static DEFINE_IDR(scmi_protocols);
+static DEFINE_SPINLOCK(protocol_lock);
+
+static const struct scmi_device_id *
+scmi_dev_match_id(struct scmi_device *scmi_dev, struct scmi_driver *scmi_drv)
+{
+	const struct scmi_device_id *id = scmi_drv->id_table;
+
+	if (!id)
+		return NULL;
+
+	for (; id->protocol_id; id++)
+		if (id->protocol_id == scmi_dev->protocol_id) {
+			if (!id->name)
+				return id;
+			else if (!strcmp(id->name, scmi_dev->name))
+				return id;
+		}
+
+	return NULL;
+}
+
+static int scmi_dev_match(struct device *dev, struct device_driver *drv)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(drv);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+	const struct scmi_device_id *id;
+
+	id = scmi_dev_match_id(scmi_dev, scmi_drv);
+	if (id)
+		return 1;
+
+	return 0;
+}
+
+static int scmi_protocol_init(int protocol_id, struct scmi_handle *handle)
+{
+	scmi_prot_init_fn_t fn = idr_find(&scmi_protocols, protocol_id);
+
+	if (unlikely(!fn))
+		return -EINVAL;
+	return fn(handle);
+}
+
+static int scmi_protocol_dummy_init(struct scmi_handle *handle)
+{
+	return 0;
+}
+
+static int scmi_dev_probe(struct device *dev)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+	const struct scmi_device_id *id;
+	int ret;
+
+	id = scmi_dev_match_id(scmi_dev, scmi_drv);
+	if (!id)
+		return -ENODEV;
+
+	if (!scmi_dev->handle)
+		return -EPROBE_DEFER;
+
+	ret = scmi_protocol_init(scmi_dev->protocol_id, scmi_dev->handle);
+	if (ret)
+		return ret;
+
+	/* Skip protocol initialisation for additional devices */
+	idr_replace(&scmi_protocols, &scmi_protocol_dummy_init,
+		    scmi_dev->protocol_id);
+
+	return scmi_drv->probe(scmi_dev);
+}
+
+static int scmi_dev_remove(struct device *dev)
+{
+	struct scmi_driver *scmi_drv = to_scmi_driver(dev->driver);
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+
+	if (scmi_drv->remove)
+		scmi_drv->remove(scmi_dev);
+
+	return 0;
+}
+
+static struct bus_type scmi_bus_type = {
+	.name =	"scmi_protocol",
+	.match = scmi_dev_match,
+	.probe = scmi_dev_probe,
+	.remove = scmi_dev_remove,
+};
+
+int scmi_driver_register(struct scmi_driver *driver, struct module *owner,
+			 const char *mod_name)
+{
+	int retval;
+
+	if (!driver->probe)
+		return -EINVAL;
+
+	driver->driver.bus = &scmi_bus_type;
+	driver->driver.name = driver->name;
+	driver->driver.owner = owner;
+	driver->driver.mod_name = mod_name;
+
+	retval = driver_register(&driver->driver);
+	if (!retval)
+		pr_debug("registered new scmi driver %s\n", driver->name);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(scmi_driver_register);
+
+void scmi_driver_unregister(struct scmi_driver *driver)
+{
+	driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(scmi_driver_unregister);
+
+static void scmi_device_release(struct device *dev)
+{
+	kfree(to_scmi_dev(dev));
+}
+
+struct scmi_device *
+scmi_device_create(struct device_node *np, struct device *parent, int protocol,
+		   const char *name)
+{
+	int id, retval;
+	struct scmi_device *scmi_dev;
+
+	scmi_dev = kzalloc(sizeof(*scmi_dev), GFP_KERNEL);
+	if (!scmi_dev)
+		return NULL;
+
+	scmi_dev->name = kstrdup_const(name ?: "unknown", GFP_KERNEL);
+	if (!scmi_dev->name) {
+		kfree(scmi_dev);
+		return NULL;
+	}
+
+	id = ida_simple_get(&scmi_bus_id, 1, 0, GFP_KERNEL);
+	if (id < 0) {
+		kfree_const(scmi_dev->name);
+		kfree(scmi_dev);
+		return NULL;
+	}
+
+	scmi_dev->id = id;
+	scmi_dev->protocol_id = protocol;
+	scmi_dev->dev.parent = parent;
+	scmi_dev->dev.of_node = np;
+	scmi_dev->dev.bus = &scmi_bus_type;
+	scmi_dev->dev.release = scmi_device_release;
+	dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id);
+
+	retval = device_register(&scmi_dev->dev);
+	if (retval)
+		goto put_dev;
+
+	return scmi_dev;
+put_dev:
+	kfree_const(scmi_dev->name);
+	put_device(&scmi_dev->dev);
+	ida_simple_remove(&scmi_bus_id, id);
+	return NULL;
+}
+
+void scmi_device_destroy(struct scmi_device *scmi_dev)
+{
+	kfree_const(scmi_dev->name);
+	scmi_handle_put(scmi_dev->handle);
+	ida_simple_remove(&scmi_bus_id, scmi_dev->id);
+	device_unregister(&scmi_dev->dev);
+}
+
+void scmi_set_handle(struct scmi_device *scmi_dev)
+{
+	scmi_dev->handle = scmi_handle_get(&scmi_dev->dev);
+}
+
+int scmi_protocol_register(int protocol_id, scmi_prot_init_fn_t fn)
+{
+	int ret;
+
+	spin_lock(&protocol_lock);
+	ret = idr_alloc(&scmi_protocols, fn, protocol_id, protocol_id + 1,
+			GFP_ATOMIC);
+	spin_unlock(&protocol_lock);
+	if (ret != protocol_id)
+		pr_err("unable to allocate SCMI idr slot, err %d\n", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_register);
+
+void scmi_protocol_unregister(int protocol_id)
+{
+	spin_lock(&protocol_lock);
+	idr_remove(&scmi_protocols, protocol_id);
+	spin_unlock(&protocol_lock);
+}
+EXPORT_SYMBOL_GPL(scmi_protocol_unregister);
+
+static int __scmi_devices_unregister(struct device *dev, void *data)
+{
+	struct scmi_device *scmi_dev = to_scmi_dev(dev);
+
+	scmi_device_destroy(scmi_dev);
+	return 0;
+}
+
+static void scmi_devices_unregister(void)
+{
+	bus_for_each_dev(&scmi_bus_type, NULL, NULL, __scmi_devices_unregister);
+}
+
+int __init scmi_bus_init(void)
+{
+	int retval;
+
+	retval = bus_register(&scmi_bus_type);
+	if (retval)
+		pr_err("scmi protocol bus register failed (%d)\n", retval);
+
+	return retval;
+}
+
+void __exit scmi_bus_exit(void)
+{
+	scmi_devices_unregister();
+	bus_unregister(&scmi_bus_type);
+	ida_destroy(&scmi_bus_id);
+}
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
new file mode 100644
index 000000000..a45678cd9
--- /dev/null
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Clock Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/sort.h>
+
+#include "common.h"
+
+enum scmi_clock_protocol_cmd {
+	CLOCK_ATTRIBUTES = 0x3,
+	CLOCK_DESCRIBE_RATES = 0x4,
+	CLOCK_RATE_SET = 0x5,
+	CLOCK_RATE_GET = 0x6,
+	CLOCK_CONFIG_SET = 0x7,
+};
+
+struct scmi_msg_resp_clock_protocol_attributes {
+	__le16 num_clocks;
+	u8 max_async_req;
+	u8 reserved;
+};
+
+struct scmi_msg_resp_clock_attributes {
+	__le32 attributes;
+#define	CLOCK_ENABLE	BIT(0)
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_clock_set_config {
+	__le32 id;
+	__le32 attributes;
+};
+
+struct scmi_msg_clock_describe_rates {
+	__le32 id;
+	__le32 rate_index;
+};
+
+struct scmi_msg_resp_clock_describe_rates {
+	__le32 num_rates_flags;
+#define NUM_RETURNED(x)		((x) & 0xfff)
+#define RATE_DISCRETE(x)	!((x) & BIT(12))
+#define NUM_REMAINING(x)	((x) >> 16)
+	struct {
+		__le32 value_low;
+		__le32 value_high;
+	} rate[0];
+#define RATE_TO_U64(X)		\
+({				\
+	typeof(X) x = (X);	\
+	le32_to_cpu((x).value_low) | (u64)le32_to_cpu((x).value_high) << 32; \
+})
+};
+
+struct scmi_clock_set_rate {
+	__le32 flags;
+#define CLOCK_SET_ASYNC		BIT(0)
+#define CLOCK_SET_IGNORE_RESP	BIT(1)
+#define CLOCK_SET_ROUND_UP	BIT(2)
+#define CLOCK_SET_ROUND_AUTO	BIT(3)
+	__le32 id;
+	__le32 value_low;
+	__le32 value_high;
+};
+
+struct clock_info {
+	u32 version;
+	int num_clocks;
+	int max_async_req;
+	atomic_t cur_async_req;
+	struct scmi_clock_info *clk;
+};
+
+static int scmi_clock_protocol_attributes_get(const struct scmi_handle *handle,
+					      struct clock_info *ci)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_protocol_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_CLOCK, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		ci->num_clocks = le16_to_cpu(attr->num_clocks);
+		ci->max_async_req = attr->max_async_req;
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_attributes_get(const struct scmi_handle *handle,
+				     u32 clk_id, struct scmi_clock_info *clk)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_clock_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, CLOCK_ATTRIBUTES, SCMI_PROTOCOL_CLOCK,
+				 sizeof(clk_id), sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(clk_id, t->tx.buf);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+	else
+		clk->name[0] = '\0';
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int rate_cmp_func(const void *_r1, const void *_r2)
+{
+	const u64 *r1 = _r1, *r2 = _r2;
+
+	if (*r1 < *r2)
+		return -1;
+	else if (*r1 == *r2)
+		return 0;
+	else
+		return 1;
+}
+
+static int
+scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id,
+			      struct scmi_clock_info *clk)
+{
+	u64 *rate = NULL;
+	int ret, cnt;
+	bool rate_discrete = false;
+	u32 tot_rate_cnt = 0, rates_flag;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_msg_clock_describe_rates *clk_desc;
+	struct scmi_msg_resp_clock_describe_rates *rlist;
+
+	ret = scmi_xfer_get_init(handle, CLOCK_DESCRIBE_RATES,
+				 SCMI_PROTOCOL_CLOCK, sizeof(*clk_desc), 0, &t);
+	if (ret)
+		return ret;
+
+	clk_desc = t->tx.buf;
+	rlist = t->rx.buf;
+
+	do {
+		clk_desc->id = cpu_to_le32(clk_id);
+		/* Set the number of rates to be skipped/already read */
+		clk_desc->rate_index = cpu_to_le32(tot_rate_cnt);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			goto err;
+
+		rates_flag = le32_to_cpu(rlist->num_rates_flags);
+		num_remaining = NUM_REMAINING(rates_flag);
+		rate_discrete = RATE_DISCRETE(rates_flag);
+		num_returned = NUM_RETURNED(rates_flag);
+
+		if (tot_rate_cnt + num_returned > SCMI_MAX_NUM_RATES) {
+			dev_err(handle->dev, "No. of rates > MAX_NUM_RATES");
+			break;
+		}
+
+		if (!rate_discrete) {
+			clk->range.min_rate = RATE_TO_U64(rlist->rate[0]);
+			clk->range.max_rate = RATE_TO_U64(rlist->rate[1]);
+			clk->range.step_size = RATE_TO_U64(rlist->rate[2]);
+			dev_dbg(handle->dev, "Min %llu Max %llu Step %llu Hz\n",
+				clk->range.min_rate, clk->range.max_rate,
+				clk->range.step_size);
+			break;
+		}
+
+		rate = &clk->list.rates[tot_rate_cnt];
+		for (cnt = 0; cnt < num_returned; cnt++, rate++) {
+			*rate = RATE_TO_U64(rlist->rate[cnt]);
+			dev_dbg(handle->dev, "Rate %llu Hz\n", *rate);
+		}
+
+		tot_rate_cnt += num_returned;
+
+		scmi_reset_rx_to_maxsz(handle, t);
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	if (rate_discrete && rate) {
+		clk->list.num_rates = tot_rate_cnt;
+		sort(clk->list.rates, tot_rate_cnt, sizeof(*rate),
+		     rate_cmp_func, NULL);
+	}
+
+	clk->rate_discrete = rate_discrete;
+
+err:
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_rate_get(const struct scmi_handle *handle, u32 clk_id, u64 *value)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, CLOCK_RATE_GET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(__le32), sizeof(u64), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(clk_id, t->tx.buf);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		*value = get_unaligned_le64(t->rx.buf);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_rate_set(const struct scmi_handle *handle, u32 clk_id,
+			       u64 rate)
+{
+	int ret;
+	u32 flags = 0;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_rate *cfg;
+	struct clock_info *ci = handle->clk_priv;
+
+	ret = scmi_xfer_get_init(handle, CLOCK_RATE_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	if (ci->max_async_req &&
+	    atomic_inc_return(&ci->cur_async_req) < ci->max_async_req)
+		flags |= CLOCK_SET_ASYNC;
+
+	cfg = t->tx.buf;
+	cfg->flags = cpu_to_le32(flags);
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->value_low = cpu_to_le32(rate & 0xffffffff);
+	cfg->value_high = cpu_to_le32(rate >> 32);
+
+	if (flags & CLOCK_SET_ASYNC)
+		ret = scmi_do_xfer_with_response(handle, t);
+	else
+		ret = scmi_do_xfer(handle, t);
+
+	if (ci->max_async_req)
+		atomic_dec(&ci->cur_async_req);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_clock_config_set(const struct scmi_handle *handle, u32 clk_id, u32 config)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_clock_set_config *cfg;
+
+	ret = scmi_xfer_get_init(handle, CLOCK_CONFIG_SET, SCMI_PROTOCOL_CLOCK,
+				 sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->id = cpu_to_le32(clk_id);
+	cfg->attributes = cpu_to_le32(config);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_clock_enable(const struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, CLOCK_ENABLE);
+}
+
+static int scmi_clock_disable(const struct scmi_handle *handle, u32 clk_id)
+{
+	return scmi_clock_config_set(handle, clk_id, 0);
+}
+
+static int scmi_clock_count_get(const struct scmi_handle *handle)
+{
+	struct clock_info *ci = handle->clk_priv;
+
+	return ci->num_clocks;
+}
+
+static const struct scmi_clock_info *
+scmi_clock_info_get(const struct scmi_handle *handle, u32 clk_id)
+{
+	struct clock_info *ci = handle->clk_priv;
+	struct scmi_clock_info *clk = ci->clk + clk_id;
+
+	if (!clk->name[0])
+		return NULL;
+
+	return clk;
+}
+
+static const struct scmi_clk_ops clk_ops = {
+	.count_get = scmi_clock_count_get,
+	.info_get = scmi_clock_info_get,
+	.rate_get = scmi_clock_rate_get,
+	.rate_set = scmi_clock_rate_set,
+	.enable = scmi_clock_enable,
+	.disable = scmi_clock_disable,
+};
+
+static int scmi_clock_protocol_init(struct scmi_handle *handle)
+{
+	u32 version;
+	int clkid, ret;
+	struct clock_info *cinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_CLOCK, &version);
+
+	dev_dbg(handle->dev, "Clock Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	cinfo = devm_kzalloc(handle->dev, sizeof(*cinfo), GFP_KERNEL);
+	if (!cinfo)
+		return -ENOMEM;
+
+	scmi_clock_protocol_attributes_get(handle, cinfo);
+
+	cinfo->clk = devm_kcalloc(handle->dev, cinfo->num_clocks,
+				  sizeof(*cinfo->clk), GFP_KERNEL);
+	if (!cinfo->clk)
+		return -ENOMEM;
+
+	for (clkid = 0; clkid < cinfo->num_clocks; clkid++) {
+		struct scmi_clock_info *clk = cinfo->clk + clkid;
+
+		ret = scmi_clock_attributes_get(handle, clkid, clk);
+		if (!ret)
+			scmi_clock_describe_rates_get(handle, clkid, clk);
+	}
+
+	cinfo->version = version;
+	handle->clk_ops = &clk_ops;
+	handle->clk_priv = cinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_CLOCK, clock)
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
new file mode 100644
index 000000000..34b7ae798
--- /dev/null
+++ b/drivers/firmware/arm_scmi/common.h
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System Control and Management Interface (SCMI) Message Protocol
+ * driver common header file containing some definitions, structures
+ * and function prototypes used in all the different SCMI protocols.
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+#ifndef _SCMI_COMMON_H
+#define _SCMI_COMMON_H
+
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/scmi_protocol.h>
+#include <linux/types.h>
+
+#include <asm/unaligned.h>
+
+#define PROTOCOL_REV_MINOR_MASK	GENMASK(15, 0)
+#define PROTOCOL_REV_MAJOR_MASK	GENMASK(31, 16)
+#define PROTOCOL_REV_MAJOR(x)	(u16)(FIELD_GET(PROTOCOL_REV_MAJOR_MASK, (x)))
+#define PROTOCOL_REV_MINOR(x)	(u16)(FIELD_GET(PROTOCOL_REV_MINOR_MASK, (x)))
+#define MAX_PROTOCOLS_IMP	16
+#define MAX_OPPS		16
+
+enum scmi_common_cmd {
+	PROTOCOL_VERSION = 0x0,
+	PROTOCOL_ATTRIBUTES = 0x1,
+	PROTOCOL_MESSAGE_ATTRIBUTES = 0x2,
+};
+
+/**
+ * struct scmi_msg_resp_prot_version - Response for a message
+ *
+ * @minor_version: Minor version of the ABI that firmware supports
+ * @major_version: Major version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type SCMI_MSG_VERSION
+ */
+struct scmi_msg_resp_prot_version {
+	__le16 minor_version;
+	__le16 major_version;
+};
+
+#define MSG_ID_MASK		GENMASK(7, 0)
+#define MSG_XTRACT_ID(hdr)	FIELD_GET(MSG_ID_MASK, (hdr))
+#define MSG_TYPE_MASK		GENMASK(9, 8)
+#define MSG_XTRACT_TYPE(hdr)	FIELD_GET(MSG_TYPE_MASK, (hdr))
+#define MSG_TYPE_COMMAND	0
+#define MSG_TYPE_DELAYED_RESP	2
+#define MSG_TYPE_NOTIFICATION	3
+#define MSG_PROTOCOL_ID_MASK	GENMASK(17, 10)
+#define MSG_XTRACT_PROT_ID(hdr)	FIELD_GET(MSG_PROTOCOL_ID_MASK, (hdr))
+#define MSG_TOKEN_ID_MASK	GENMASK(27, 18)
+#define MSG_XTRACT_TOKEN(hdr)	FIELD_GET(MSG_TOKEN_ID_MASK, (hdr))
+#define MSG_TOKEN_MAX		(MSG_XTRACT_TOKEN(MSG_TOKEN_ID_MASK) + 1)
+
+/**
+ * struct scmi_msg_hdr - Message(Tx/Rx) header
+ *
+ * @id: The identifier of the message being sent
+ * @protocol_id: The identifier of the protocol used to send @id message
+ * @seq: The token to identify the message. When a message returns, the
+ *	platform returns the whole message header unmodified including the
+ *	token
+ * @status: Status of the transfer once it's complete
+ * @poll_completion: Indicate if the transfer needs to be polled for
+ *	completion or interrupt mode is used
+ */
+struct scmi_msg_hdr {
+	u8 id;
+	u8 protocol_id;
+	u16 seq;
+	u32 status;
+	bool poll_completion;
+};
+
+/**
+ * pack_scmi_header() - packs and returns 32-bit header
+ *
+ * @hdr: pointer to header containing all the information on message id,
+ *	protocol id and sequence id.
+ *
+ * Return: 32-bit packed message header to be sent to the platform.
+ */
+static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
+{
+	return FIELD_PREP(MSG_ID_MASK, hdr->id) |
+		FIELD_PREP(MSG_TOKEN_ID_MASK, hdr->seq) |
+		FIELD_PREP(MSG_PROTOCOL_ID_MASK, hdr->protocol_id);
+}
+
+/**
+ * unpack_scmi_header() - unpacks and records message and protocol id
+ *
+ * @msg_hdr: 32-bit packed message header sent from the platform
+ * @hdr: pointer to header to fetch message and protocol id.
+ */
+static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
+{
+	hdr->id = MSG_XTRACT_ID(msg_hdr);
+	hdr->protocol_id = MSG_XTRACT_PROT_ID(msg_hdr);
+}
+
+/**
+ * struct scmi_msg - Message(Tx/Rx) structure
+ *
+ * @buf: Buffer pointer
+ * @len: Length of data in the Buffer
+ */
+struct scmi_msg {
+	void *buf;
+	size_t len;
+};
+
+/**
+ * struct scmi_xfer - Structure representing a message flow
+ *
+ * @transfer_id: Unique ID for debug & profiling purpose
+ * @hdr: Transmit message header
+ * @tx: Transmit message
+ * @rx: Receive message, the buffer should be pre-allocated to store
+ *	message. If request-ACK protocol is used, we can reuse the same
+ *	buffer for the rx path as we use for the tx path.
+ * @done: command message transmit completion event
+ * @async_done: pointer to delayed response message received event completion
+ */
+struct scmi_xfer {
+	int transfer_id;
+	struct scmi_msg_hdr hdr;
+	struct scmi_msg tx;
+	struct scmi_msg rx;
+	struct completion done;
+	struct completion *async_done;
+};
+
+void scmi_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer);
+int scmi_do_xfer(const struct scmi_handle *h, struct scmi_xfer *xfer);
+int scmi_do_xfer_with_response(const struct scmi_handle *h,
+			       struct scmi_xfer *xfer);
+int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id,
+		       size_t tx_size, size_t rx_size, struct scmi_xfer **p);
+void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle,
+			    struct scmi_xfer *xfer);
+int scmi_handle_put(const struct scmi_handle *handle);
+struct scmi_handle *scmi_handle_get(struct device *dev);
+void scmi_set_handle(struct scmi_device *scmi_dev);
+int scmi_version_get(const struct scmi_handle *h, u8 protocol, u32 *version);
+void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
+				     u8 *prot_imp);
+
+int scmi_base_protocol_init(struct scmi_handle *h);
+
+int __init scmi_bus_init(void);
+void __exit scmi_bus_exit(void);
+
+#define DECLARE_SCMI_REGISTER_UNREGISTER(func)		\
+	int __init scmi_##func##_register(void);	\
+	void __exit scmi_##func##_unregister(void)
+DECLARE_SCMI_REGISTER_UNREGISTER(clock);
+DECLARE_SCMI_REGISTER_UNREGISTER(perf);
+DECLARE_SCMI_REGISTER_UNREGISTER(power);
+DECLARE_SCMI_REGISTER_UNREGISTER(reset);
+DECLARE_SCMI_REGISTER_UNREGISTER(sensors);
+DECLARE_SCMI_REGISTER_UNREGISTER(system);
+
+#define DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(id, name) \
+int __init scmi_##name##_register(void) \
+{ \
+	return scmi_protocol_register((id), &scmi_##name##_protocol_init); \
+} \
+\
+void __exit scmi_##name##_unregister(void) \
+{ \
+	scmi_protocol_unregister((id)); \
+}
+
+/* SCMI Transport */
+/**
+ * struct scmi_chan_info - Structure representing a SCMI channel information
+ *
+ * @dev: Reference to device in the SCMI hierarchy corresponding to this
+ *	 channel
+ * @handle: Pointer to SCMI entity handle
+ * @transport_info: Transport layer related information
+ */
+struct scmi_chan_info {
+	struct device *dev;
+	struct scmi_handle *handle;
+	void *transport_info;
+};
+
+/**
+ * struct scmi_transport_ops - Structure representing a SCMI transport ops
+ *
+ * @chan_available: Callback to check if channel is available or not
+ * @chan_setup: Callback to allocate and setup a channel
+ * @chan_free: Callback to free a channel
+ * @send_message: Callback to send a message
+ * @mark_txdone: Callback to mark tx as done
+ * @fetch_response: Callback to fetch response
+ * @fetch_notification: Callback to fetch notification
+ * @clear_channel: Callback to clear a channel
+ * @poll_done: Callback to poll transfer status
+ */
+struct scmi_transport_ops {
+	bool (*chan_available)(struct device *dev, int idx);
+	int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
+			  bool tx);
+	int (*chan_free)(int id, void *p, void *data);
+	int (*send_message)(struct scmi_chan_info *cinfo,
+			    struct scmi_xfer *xfer);
+	void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret);
+	void (*fetch_response)(struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer);
+	void (*fetch_notification)(struct scmi_chan_info *cinfo,
+				   size_t max_len, struct scmi_xfer *xfer);
+	void (*clear_channel)(struct scmi_chan_info *cinfo);
+	bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
+};
+
+/**
+ * struct scmi_desc - Description of SoC integration
+ *
+ * @ops: Pointer to the transport specific ops structure
+ * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds)
+ * @max_msg: Maximum number of messages that can be pending
+ *	simultaneously in the system
+ * @max_msg_size: Maximum size of data per message that can be handled.
+ */
+struct scmi_desc {
+	const struct scmi_transport_ops *ops;
+	int max_rx_timeout_ms;
+	int max_msg;
+	int max_msg_size;
+};
+
+extern const struct scmi_desc scmi_mailbox_desc;
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
+extern const struct scmi_desc scmi_smc_desc;
+#endif
+
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr);
+void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
+
+/* shmem related declarations */
+struct scmi_shared_mem;
+
+void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
+		      struct scmi_xfer *xfer);
+u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem);
+void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
+			  struct scmi_xfer *xfer);
+void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
+			      size_t max_len, struct scmi_xfer *xfer);
+void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem);
+bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
+		     struct scmi_xfer *xfer);
+
+#endif /* _SCMI_COMMON_H */
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
new file mode 100644
index 000000000..8d2408284
--- /dev/null
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -0,0 +1,990 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Protocol driver
+ *
+ * SCMI Message Protocol is used between the System Control Processor(SCP)
+ * and the Application Processors(AP). The Message Handling Unit(MHU)
+ * provides a mechanism for inter-processor communication between SCP's
+ * Cortex M3 and AP.
+ *
+ * SCP offers control and management of the core/cluster power states,
+ * various power domain DVFS including the core/cluster, certain system
+ * clocks configuration, thermal sensors and many others.
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/processor.h>
+#include <linux/slab.h>
+
+#include "common.h"
+#include "notify.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/scmi.h>
+
+enum scmi_error_codes {
+	SCMI_SUCCESS = 0,	/* Success */
+	SCMI_ERR_SUPPORT = -1,	/* Not supported */
+	SCMI_ERR_PARAMS = -2,	/* Invalid Parameters */
+	SCMI_ERR_ACCESS = -3,	/* Invalid access/permission denied */
+	SCMI_ERR_ENTRY = -4,	/* Not found */
+	SCMI_ERR_RANGE = -5,	/* Value out of range */
+	SCMI_ERR_BUSY = -6,	/* Device busy */
+	SCMI_ERR_COMMS = -7,	/* Communication Error */
+	SCMI_ERR_GENERIC = -8,	/* Generic Error */
+	SCMI_ERR_HARDWARE = -9,	/* Hardware Error */
+	SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
+};
+
+/* List of all SCMI devices active in system */
+static LIST_HEAD(scmi_list);
+/* Protection for the entire list */
+static DEFINE_MUTEX(scmi_list_mutex);
+/* Track the unique id for the transfers for debug & profiling purpose */
+static atomic_t transfer_last_id;
+
+/**
+ * struct scmi_xfers_info - Structure to manage transfer information
+ *
+ * @xfer_block: Preallocated Message array
+ * @xfer_alloc_table: Bitmap table for allocated messages.
+ *	Index of this bitmap table is also used for message
+ *	sequence identifier.
+ * @xfer_lock: Protection for message allocation
+ */
+struct scmi_xfers_info {
+	struct scmi_xfer *xfer_block;
+	unsigned long *xfer_alloc_table;
+	spinlock_t xfer_lock;
+};
+
+/**
+ * struct scmi_info - Structure representing a SCMI instance
+ *
+ * @dev: Device pointer
+ * @desc: SoC description for this instance
+ * @version: SCMI revision information containing protocol version,
+ *	implementation version and (sub-)vendor identification.
+ * @handle: Instance of SCMI handle to send to clients
+ * @tx_minfo: Universal Transmit Message management info
+ * @rx_minfo: Universal Receive Message management info
+ * @tx_idr: IDR object to map protocol id to Tx channel info pointer
+ * @rx_idr: IDR object to map protocol id to Rx channel info pointer
+ * @protocols_imp: List of protocols implemented, currently maximum of
+ *	MAX_PROTOCOLS_IMP elements allocated by the base protocol
+ * @node: List head
+ * @users: Number of users of this instance
+ */
+struct scmi_info {
+	struct device *dev;
+	const struct scmi_desc *desc;
+	struct scmi_revision_info version;
+	struct scmi_handle handle;
+	struct scmi_xfers_info tx_minfo;
+	struct scmi_xfers_info rx_minfo;
+	struct idr tx_idr;
+	struct idr rx_idr;
+	u8 *protocols_imp;
+	struct list_head node;
+	int users;
+};
+
+#define handle_to_scmi_info(h)	container_of(h, struct scmi_info, handle)
+
+static const int scmi_linux_errmap[] = {
+	/* better than switch case as long as return value is continuous */
+	0,			/* SCMI_SUCCESS */
+	-EOPNOTSUPP,		/* SCMI_ERR_SUPPORT */
+	-EINVAL,		/* SCMI_ERR_PARAM */
+	-EACCES,		/* SCMI_ERR_ACCESS */
+	-ENOENT,		/* SCMI_ERR_ENTRY */
+	-ERANGE,		/* SCMI_ERR_RANGE */
+	-EBUSY,			/* SCMI_ERR_BUSY */
+	-ECOMM,			/* SCMI_ERR_COMMS */
+	-EIO,			/* SCMI_ERR_GENERIC */
+	-EREMOTEIO,		/* SCMI_ERR_HARDWARE */
+	-EPROTO,		/* SCMI_ERR_PROTOCOL */
+};
+
+static inline int scmi_to_linux_errno(int errno)
+{
+	int err_idx = -errno;
+
+	if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+		return scmi_linux_errmap[err_idx];
+	return -EIO;
+}
+
+/**
+ * scmi_dump_header_dbg() - Helper to dump a message header.
+ *
+ * @dev: Device pointer corresponding to the SCMI entity
+ * @hdr: pointer to header.
+ */
+static inline void scmi_dump_header_dbg(struct device *dev,
+					struct scmi_msg_hdr *hdr)
+{
+	dev_dbg(dev, "Message ID: %x Sequence ID: %x Protocol: %x\n",
+		hdr->id, hdr->seq, hdr->protocol_id);
+}
+
+/**
+ * scmi_xfer_get() - Allocate one message
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ *
+ * Helper function which is used by various message functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * This function can sleep depending on pending requests already in the system
+ * for the SCMI entity. Further, this also holds a spinlock to maintain
+ * integrity of internal data structures.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
+				       struct scmi_xfers_info *minfo)
+{
+	u16 xfer_id;
+	struct scmi_xfer *xfer;
+	unsigned long flags, bit_pos;
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	/* Keep the locked section as small as possible */
+	spin_lock_irqsave(&minfo->xfer_lock, flags);
+	bit_pos = find_first_zero_bit(minfo->xfer_alloc_table,
+				      info->desc->max_msg);
+	if (bit_pos == info->desc->max_msg) {
+		spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+		return ERR_PTR(-ENOMEM);
+	}
+	set_bit(bit_pos, minfo->xfer_alloc_table);
+	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+	xfer_id = bit_pos;
+
+	xfer = &minfo->xfer_block[xfer_id];
+	xfer->hdr.seq = xfer_id;
+	reinit_completion(&xfer->done);
+	xfer->transfer_id = atomic_inc_return(&transfer_last_id);
+
+	return xfer;
+}
+
+/**
+ * __scmi_xfer_put() - Release a message
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: message that was reserved by scmi_xfer_get
+ *
+ * This holds a spinlock to maintain integrity of internal data structures.
+ */
+static void
+__scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
+{
+	unsigned long flags;
+
+	/*
+	 * Keep the locked section as small as possible
+	 * NOTE: we might escape with smp_mb and no lock here..
+	 * but just be conservative and symmetric.
+	 */
+	spin_lock_irqsave(&minfo->xfer_lock, flags);
+	clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
+	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+}
+
+static void scmi_handle_notification(struct scmi_chan_info *cinfo, u32 msg_hdr)
+{
+	struct scmi_xfer *xfer;
+	struct device *dev = cinfo->dev;
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+	struct scmi_xfers_info *minfo = &info->rx_minfo;
+	ktime_t ts;
+
+	ts = ktime_get_boottime();
+	xfer = scmi_xfer_get(cinfo->handle, minfo);
+	if (IS_ERR(xfer)) {
+		dev_err(dev, "failed to get free message slot (%ld)\n",
+			PTR_ERR(xfer));
+		info->desc->ops->clear_channel(cinfo);
+		return;
+	}
+
+	unpack_scmi_header(msg_hdr, &xfer->hdr);
+	scmi_dump_header_dbg(dev, &xfer->hdr);
+	info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
+					    xfer);
+	scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
+		    xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
+
+	trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
+			   xfer->hdr.protocol_id, xfer->hdr.seq,
+			   MSG_TYPE_NOTIFICATION);
+
+	__scmi_xfer_put(minfo, xfer);
+
+	info->desc->ops->clear_channel(cinfo);
+}
+
+static void scmi_handle_response(struct scmi_chan_info *cinfo,
+				 u16 xfer_id, u8 msg_type)
+{
+	struct scmi_xfer *xfer;
+	struct device *dev = cinfo->dev;
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+	struct scmi_xfers_info *minfo = &info->tx_minfo;
+
+	/* Are we even expecting this? */
+	if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
+		dev_err(dev, "message for %d is not expected!\n", xfer_id);
+		info->desc->ops->clear_channel(cinfo);
+		return;
+	}
+
+	xfer = &minfo->xfer_block[xfer_id];
+	/*
+	 * Even if a response was indeed expected on this slot at this point,
+	 * a buggy platform could wrongly reply feeding us an unexpected
+	 * delayed response we're not prepared to handle: bail-out safely
+	 * blaming firmware.
+	 */
+	if (unlikely(msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done)) {
+		dev_err(dev,
+			"Delayed Response for %d not expected! Buggy F/W ?\n",
+			xfer_id);
+		info->desc->ops->clear_channel(cinfo);
+		/* It was unexpected, so nobody will clear the xfer if not us */
+		__scmi_xfer_put(minfo, xfer);
+		return;
+	}
+
+	/* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */
+	if (msg_type == MSG_TYPE_DELAYED_RESP)
+		xfer->rx.len = info->desc->max_msg_size;
+
+	scmi_dump_header_dbg(dev, &xfer->hdr);
+
+	info->desc->ops->fetch_response(cinfo, xfer);
+
+	trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
+			   xfer->hdr.protocol_id, xfer->hdr.seq,
+			   msg_type);
+
+	if (msg_type == MSG_TYPE_DELAYED_RESP) {
+		info->desc->ops->clear_channel(cinfo);
+		complete(xfer->async_done);
+	} else {
+		complete(&xfer->done);
+	}
+}
+
+/**
+ * scmi_rx_callback() - callback for receiving messages
+ *
+ * @cinfo: SCMI channel info
+ * @msg_hdr: Message header
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr)
+{
+	u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+	u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+
+	switch (msg_type) {
+	case MSG_TYPE_NOTIFICATION:
+		scmi_handle_notification(cinfo, msg_hdr);
+		break;
+	case MSG_TYPE_COMMAND:
+	case MSG_TYPE_DELAYED_RESP:
+		scmi_handle_response(cinfo, xfer_id, msg_type);
+		break;
+	default:
+		WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type);
+		break;
+	}
+}
+
+/**
+ * scmi_xfer_put() - Release a transmit message
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: message that was reserved by scmi_xfer_get
+ */
+void scmi_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	__scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
+#define SCMI_MAX_POLL_TO_NS	(100 * NSEC_PER_USEC)
+
+static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
+				      struct scmi_xfer *xfer, ktime_t stop)
+{
+	struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+
+	return info->desc->ops->poll_done(cinfo, xfer) ||
+	       ktime_after(ktime_get(), stop);
+}
+
+/**
+ * scmi_do_xfer() - Do one transfer
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no response, if transmit error,
+ *	return corresponding error, else if all goes well,
+ *	return 0.
+ */
+int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
+{
+	int ret;
+	int timeout;
+	struct scmi_info *info = handle_to_scmi_info(handle);
+	struct device *dev = info->dev;
+	struct scmi_chan_info *cinfo;
+
+	cinfo = idr_find(&info->tx_idr, xfer->hdr.protocol_id);
+	if (unlikely(!cinfo))
+		return -EINVAL;
+
+	trace_scmi_xfer_begin(xfer->transfer_id, xfer->hdr.id,
+			      xfer->hdr.protocol_id, xfer->hdr.seq,
+			      xfer->hdr.poll_completion);
+
+	ret = info->desc->ops->send_message(cinfo, xfer);
+	if (ret < 0) {
+		dev_dbg(dev, "Failed to send message %d\n", ret);
+		return ret;
+	}
+
+	if (xfer->hdr.poll_completion) {
+		ktime_t stop = ktime_add_ns(ktime_get(), SCMI_MAX_POLL_TO_NS);
+
+		spin_until_cond(scmi_xfer_done_no_timeout(cinfo, xfer, stop));
+
+		if (ktime_before(ktime_get(), stop))
+			info->desc->ops->fetch_response(cinfo, xfer);
+		else
+			ret = -ETIMEDOUT;
+	} else {
+		/* And we wait for the response. */
+		timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
+		if (!wait_for_completion_timeout(&xfer->done, timeout)) {
+			dev_err(dev, "timed out in resp(caller: %pS)\n",
+				(void *)_RET_IP_);
+			ret = -ETIMEDOUT;
+		}
+	}
+
+	if (!ret && xfer->hdr.status)
+		ret = scmi_to_linux_errno(xfer->hdr.status);
+
+	if (info->desc->ops->mark_txdone)
+		info->desc->ops->mark_txdone(cinfo, ret);
+
+	trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id,
+			    xfer->hdr.protocol_id, xfer->hdr.seq, ret);
+
+	return ret;
+}
+
+void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle,
+			    struct scmi_xfer *xfer)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	xfer->rx.len = info->desc->max_msg_size;
+}
+
+#define SCMI_MAX_RESPONSE_TIMEOUT	(2 * MSEC_PER_SEC)
+
+/**
+ * scmi_do_xfer_with_response() - Do one transfer and wait until the delayed
+ *	response is received
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no delayed response, if transmit error,
+ *	return corresponding error, else if all goes well, return 0.
+ */
+int scmi_do_xfer_with_response(const struct scmi_handle *handle,
+			       struct scmi_xfer *xfer)
+{
+	int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
+	DECLARE_COMPLETION_ONSTACK(async_response);
+
+	xfer->async_done = &async_response;
+
+	ret = scmi_do_xfer(handle, xfer);
+	if (!ret) {
+		if (!wait_for_completion_timeout(xfer->async_done, timeout))
+			ret = -ETIMEDOUT;
+		else if (xfer->hdr.status)
+			ret = scmi_to_linux_errno(xfer->hdr.status);
+	}
+
+	xfer->async_done = NULL;
+	return ret;
+}
+
+/**
+ * scmi_xfer_get_init() - Allocate and initialise one message for transmit
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @msg_id: Message identifier
+ * @prot_id: Protocol identifier for the message
+ * @tx_size: transmit message size
+ * @rx_size: receive message size
+ * @p: pointer to the allocated and initialised message
+ *
+ * This function allocates the message using @scmi_xfer_get and
+ * initialise the header.
+ *
+ * Return: 0 if all went fine with @p pointing to message, else
+ *	corresponding error.
+ */
+int scmi_xfer_get_init(const struct scmi_handle *handle, u8 msg_id, u8 prot_id,
+		       size_t tx_size, size_t rx_size, struct scmi_xfer **p)
+{
+	int ret;
+	struct scmi_xfer *xfer;
+	struct scmi_info *info = handle_to_scmi_info(handle);
+	struct scmi_xfers_info *minfo = &info->tx_minfo;
+	struct device *dev = info->dev;
+
+	/* Ensure we have sane transfer sizes */
+	if (rx_size > info->desc->max_msg_size ||
+	    tx_size > info->desc->max_msg_size)
+		return -ERANGE;
+
+	xfer = scmi_xfer_get(handle, minfo);
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "failed to get free message slot(%d)\n", ret);
+		return ret;
+	}
+
+	xfer->tx.len = tx_size;
+	xfer->rx.len = rx_size ? : info->desc->max_msg_size;
+	xfer->hdr.id = msg_id;
+	xfer->hdr.protocol_id = prot_id;
+	xfer->hdr.poll_completion = false;
+
+	*p = xfer;
+
+	return 0;
+}
+
+/**
+ * scmi_version_get() - command to get the revision of the SCMI entity
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @protocol: Protocol identifier for the message
+ * @version: Holds returned version of protocol.
+ *
+ * Updates the SCMI information in the internal data structure.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+int scmi_version_get(const struct scmi_handle *handle, u8 protocol,
+		     u32 *version)
+{
+	int ret;
+	__le32 *rev_info;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_VERSION, protocol, 0,
+				 sizeof(*version), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		rev_info = t->rx.buf;
+		*version = le32_to_cpu(*rev_info);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+void scmi_setup_protocol_implemented(const struct scmi_handle *handle,
+				     u8 *prot_imp)
+{
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	info->protocols_imp = prot_imp;
+}
+
+static bool
+scmi_is_protocol_implemented(const struct scmi_handle *handle, u8 prot_id)
+{
+	int i;
+	struct scmi_info *info = handle_to_scmi_info(handle);
+
+	if (!info->protocols_imp)
+		return false;
+
+	for (i = 0; i < MAX_PROTOCOLS_IMP; i++)
+		if (info->protocols_imp[i] == prot_id)
+			return true;
+	return false;
+}
+
+/**
+ * scmi_handle_get() - Get the SCMI handle for a device
+ *
+ * @dev: pointer to device for which we want SCMI handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of SCMI protocol library.
+ * scmi_handle_put must be balanced with successful scmi_handle_get
+ *
+ * Return: pointer to handle if successful, NULL on error
+ */
+struct scmi_handle *scmi_handle_get(struct device *dev)
+{
+	struct list_head *p;
+	struct scmi_info *info;
+	struct scmi_handle *handle = NULL;
+
+	mutex_lock(&scmi_list_mutex);
+	list_for_each(p, &scmi_list) {
+		info = list_entry(p, struct scmi_info, node);
+		if (dev->parent == info->dev) {
+			handle = &info->handle;
+			info->users++;
+			break;
+		}
+	}
+	mutex_unlock(&scmi_list_mutex);
+
+	return handle;
+}
+
+/**
+ * scmi_handle_put() - Release the handle acquired by scmi_handle_get
+ *
+ * @handle: handle acquired by scmi_handle_get
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of SCMI protocol library.
+ * scmi_handle_put must be balanced with successful scmi_handle_get
+ *
+ * Return: 0 is successfully released
+ *	if null was passed, it returns -EINVAL;
+ */
+int scmi_handle_put(const struct scmi_handle *handle)
+{
+	struct scmi_info *info;
+
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_scmi_info(handle);
+	mutex_lock(&scmi_list_mutex);
+	if (!WARN_ON(!info->users))
+		info->users--;
+	mutex_unlock(&scmi_list_mutex);
+
+	return 0;
+}
+
+static int __scmi_xfer_info_init(struct scmi_info *sinfo,
+				 struct scmi_xfers_info *info)
+{
+	int i;
+	struct scmi_xfer *xfer;
+	struct device *dev = sinfo->dev;
+	const struct scmi_desc *desc = sinfo->desc;
+
+	/* Pre-allocated messages, no more than what hdr.seq can support */
+	if (WARN_ON(!desc->max_msg || desc->max_msg > MSG_TOKEN_MAX)) {
+		dev_err(dev,
+			"Invalid maximum messages %d, not in range [1 - %lu]\n",
+			desc->max_msg, MSG_TOKEN_MAX);
+		return -EINVAL;
+	}
+
+	info->xfer_block = devm_kcalloc(dev, desc->max_msg,
+					sizeof(*info->xfer_block), GFP_KERNEL);
+	if (!info->xfer_block)
+		return -ENOMEM;
+
+	info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(desc->max_msg),
+					      sizeof(long), GFP_KERNEL);
+	if (!info->xfer_alloc_table)
+		return -ENOMEM;
+
+	/* Pre-initialize the buffer pointer to pre-allocated buffers */
+	for (i = 0, xfer = info->xfer_block; i < desc->max_msg; i++, xfer++) {
+		xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size,
+					    GFP_KERNEL);
+		if (!xfer->rx.buf)
+			return -ENOMEM;
+
+		xfer->tx.buf = xfer->rx.buf;
+		init_completion(&xfer->done);
+	}
+
+	spin_lock_init(&info->xfer_lock);
+
+	return 0;
+}
+
+static int scmi_xfer_info_init(struct scmi_info *sinfo)
+{
+	int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+
+	if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE))
+		ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
+
+	return ret;
+}
+
+static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
+			   int prot_id, bool tx)
+{
+	int ret, idx;
+	struct scmi_chan_info *cinfo;
+	struct idr *idr;
+
+	/* Transmit channel is first entry i.e. index 0 */
+	idx = tx ? 0 : 1;
+	idr = tx ? &info->tx_idr : &info->rx_idr;
+
+	/* check if already allocated, used for multiple device per protocol */
+	cinfo = idr_find(idr, prot_id);
+	if (cinfo)
+		return 0;
+
+	if (!info->desc->ops->chan_available(dev, idx)) {
+		cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
+		if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
+			return -EINVAL;
+		goto idr_alloc;
+	}
+
+	cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
+	if (!cinfo)
+		return -ENOMEM;
+
+	cinfo->dev = dev;
+
+	ret = info->desc->ops->chan_setup(cinfo, info->dev, tx);
+	if (ret)
+		return ret;
+
+idr_alloc:
+	ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
+	if (ret != prot_id) {
+		dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
+		return ret;
+	}
+
+	cinfo->handle = &info->handle;
+	return 0;
+}
+
+static inline int
+scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
+{
+	int ret = scmi_chan_setup(info, dev, prot_id, true);
+
+	if (!ret) {
+		/* Rx is optional, report only memory errors */
+		ret = scmi_chan_setup(info, dev, prot_id, false);
+		if (ret && ret != -ENOMEM)
+			ret = 0;
+	}
+
+	return ret;
+}
+
+static inline void
+scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
+			    int prot_id, const char *name)
+{
+	struct scmi_device *sdev;
+
+	sdev = scmi_device_create(np, info->dev, prot_id, name);
+	if (!sdev) {
+		dev_err(info->dev, "failed to create %d protocol device\n",
+			prot_id);
+		return;
+	}
+
+	if (scmi_txrx_setup(info, &sdev->dev, prot_id)) {
+		dev_err(&sdev->dev, "failed to setup transport\n");
+		scmi_device_destroy(sdev);
+		return;
+	}
+
+	/* setup handle now as the transport is ready */
+	scmi_set_handle(sdev);
+}
+
+#define MAX_SCMI_DEV_PER_PROTOCOL	2
+struct scmi_prot_devnames {
+	int protocol_id;
+	char *names[MAX_SCMI_DEV_PER_PROTOCOL];
+};
+
+static struct scmi_prot_devnames devnames[] = {
+	{ SCMI_PROTOCOL_POWER,  { "genpd" },},
+	{ SCMI_PROTOCOL_SYSTEM, { "syspower" },},
+	{ SCMI_PROTOCOL_PERF,   { "cpufreq" },},
+	{ SCMI_PROTOCOL_CLOCK,  { "clocks" },},
+	{ SCMI_PROTOCOL_SENSOR, { "hwmon" },},
+	{ SCMI_PROTOCOL_RESET,  { "reset" },},
+};
+
+static inline void
+scmi_create_protocol_devices(struct device_node *np, struct scmi_info *info,
+			     int prot_id)
+{
+	int loop, cnt;
+
+	for (loop = 0; loop < ARRAY_SIZE(devnames); loop++) {
+		if (devnames[loop].protocol_id != prot_id)
+			continue;
+
+		for (cnt = 0; cnt < ARRAY_SIZE(devnames[loop].names); cnt++) {
+			const char *name = devnames[loop].names[cnt];
+
+			if (name)
+				scmi_create_protocol_device(np, info, prot_id,
+							    name);
+		}
+	}
+}
+
+static int scmi_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct scmi_handle *handle;
+	const struct scmi_desc *desc;
+	struct scmi_info *info;
+	struct device *dev = &pdev->dev;
+	struct device_node *child, *np = dev->of_node;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->desc = desc;
+	INIT_LIST_HEAD(&info->node);
+
+	platform_set_drvdata(pdev, info);
+	idr_init(&info->tx_idr);
+	idr_init(&info->rx_idr);
+
+	handle = &info->handle;
+	handle->dev = info->dev;
+	handle->version = &info->version;
+
+	ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
+	if (ret)
+		return ret;
+
+	ret = scmi_xfer_info_init(info);
+	if (ret)
+		return ret;
+
+	if (scmi_notification_init(handle))
+		dev_err(dev, "SCMI Notifications NOT available.\n");
+
+	ret = scmi_base_protocol_init(handle);
+	if (ret) {
+		dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&scmi_list_mutex);
+	list_add_tail(&info->node, &scmi_list);
+	mutex_unlock(&scmi_list_mutex);
+
+	for_each_available_child_of_node(np, child) {
+		u32 prot_id;
+
+		if (of_property_read_u32(child, "reg", &prot_id))
+			continue;
+
+		if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
+			dev_err(dev, "Out of range protocol %d\n", prot_id);
+
+		if (!scmi_is_protocol_implemented(handle, prot_id)) {
+			dev_err(dev, "SCMI protocol %d not implemented\n",
+				prot_id);
+			continue;
+		}
+
+		scmi_create_protocol_devices(child, info, prot_id);
+	}
+
+	return 0;
+}
+
+void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
+{
+	idr_remove(idr, id);
+}
+
+static int scmi_remove(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct scmi_info *info = platform_get_drvdata(pdev);
+	struct idr *idr = &info->tx_idr;
+
+	mutex_lock(&scmi_list_mutex);
+	if (info->users)
+		ret = -EBUSY;
+	else
+		list_del(&info->node);
+	mutex_unlock(&scmi_list_mutex);
+
+	if (ret)
+		return ret;
+
+	scmi_notification_exit(&info->handle);
+
+	/* Safe to free channels since no more users */
+	ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+	idr_destroy(&info->tx_idr);
+
+	idr = &info->rx_idr;
+	ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+	idr_destroy(&info->rx_idr);
+
+	return ret;
+}
+
+static ssize_t protocol_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct scmi_info *info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u.%u\n", info->version.major_ver,
+		       info->version.minor_ver);
+}
+static DEVICE_ATTR_RO(protocol_version);
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct scmi_info *info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%x\n", info->version.impl_ver);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static ssize_t vendor_id_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct scmi_info *info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", info->version.vendor_id);
+}
+static DEVICE_ATTR_RO(vendor_id);
+
+static ssize_t sub_vendor_id_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct scmi_info *info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", info->version.sub_vendor_id);
+}
+static DEVICE_ATTR_RO(sub_vendor_id);
+
+static struct attribute *versions_attrs[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_protocol_version.attr,
+	&dev_attr_vendor_id.attr,
+	&dev_attr_sub_vendor_id.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(versions);
+
+/* Each compatible listed below must have descriptor associated with it */
+static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_MAILBOX
+	{ .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
+#ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY
+	{ .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
+#endif
+	{ /* Sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, scmi_of_match);
+
+static struct platform_driver scmi_driver = {
+	.driver = {
+		   .name = "arm-scmi",
+		   .suppress_bind_attrs = true,
+		   .of_match_table = scmi_of_match,
+		   .dev_groups = versions_groups,
+		   },
+	.probe = scmi_probe,
+	.remove = scmi_remove,
+};
+
+static int __init scmi_driver_init(void)
+{
+	scmi_bus_init();
+
+	scmi_clock_register();
+	scmi_perf_register();
+	scmi_power_register();
+	scmi_reset_register();
+	scmi_sensors_register();
+	scmi_system_register();
+
+	return platform_driver_register(&scmi_driver);
+}
+subsys_initcall(scmi_driver_init);
+
+static void __exit scmi_driver_exit(void)
+{
+	scmi_bus_exit();
+
+	scmi_clock_unregister();
+	scmi_perf_unregister();
+	scmi_power_unregister();
+	scmi_reset_unregister();
+	scmi_sensors_unregister();
+	scmi_system_unregister();
+
+	platform_driver_unregister(&scmi_driver);
+}
+module_exit(scmi_driver_exit);
+
+MODULE_ALIAS("platform:arm-scmi");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c
new file mode 100644
index 000000000..ad773a657
--- /dev/null
+++ b/drivers/firmware/arm_scmi/mailbox.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Mailbox Transport
+ * driver.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/mailbox_client.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_mailbox - Structure representing a SCMI mailbox transport
+ *
+ * @cl: Mailbox Client
+ * @chan: Transmit/Receive mailbox channel
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ */
+struct scmi_mailbox {
+	struct mbox_client cl;
+	struct mbox_chan *chan;
+	struct scmi_chan_info *cinfo;
+	struct scmi_shared_mem __iomem *shmem;
+};
+
+#define client_to_scmi_mailbox(c) container_of(c, struct scmi_mailbox, cl)
+
+static void tx_prepare(struct mbox_client *cl, void *m)
+{
+	struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
+
+	shmem_tx_prepare(smbox->shmem, m);
+}
+
+static void rx_callback(struct mbox_client *cl, void *m)
+{
+	struct scmi_mailbox *smbox = client_to_scmi_mailbox(cl);
+
+	scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem));
+}
+
+static bool mailbox_chan_available(struct device *dev, int idx)
+{
+	return !of_parse_phandle_with_args(dev->of_node, "mboxes",
+					   "#mbox-cells", idx, NULL);
+}
+
+static int mailbox_chan_validate(struct device *cdev)
+{
+	int num_mb, num_sh, ret = 0;
+	struct device_node *np = cdev->of_node;
+
+	num_mb = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+	num_sh = of_count_phandle_with_args(np, "shmem", NULL);
+	/* Bail out if mboxes and shmem descriptors are inconsistent */
+	if (num_mb <= 0 || num_sh > 2 || num_mb != num_sh) {
+		dev_warn(cdev, "Invalid channel descriptor for '%s'\n",
+			 of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	if (num_sh > 1) {
+		struct device_node *np_tx, *np_rx;
+
+		np_tx = of_parse_phandle(np, "shmem", 0);
+		np_rx = of_parse_phandle(np, "shmem", 1);
+		/* SCMI Tx and Rx shared mem areas have to be distinct */
+		if (!np_tx || !np_rx || np_tx == np_rx) {
+			dev_warn(cdev, "Invalid shmem descriptor for '%s'\n",
+				 of_node_full_name(np));
+			ret = -EINVAL;
+		}
+
+		of_node_put(np_tx);
+		of_node_put(np_rx);
+	}
+
+	return ret;
+}
+
+static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+			      bool tx)
+{
+	const char *desc = tx ? "Tx" : "Rx";
+	struct device *cdev = cinfo->dev;
+	struct scmi_mailbox *smbox;
+	struct device_node *shmem;
+	int ret, idx = tx ? 0 : 1;
+	struct mbox_client *cl;
+	resource_size_t size;
+	struct resource res;
+
+	ret = mailbox_chan_validate(cdev);
+	if (ret)
+		return ret;
+
+	smbox = devm_kzalloc(dev, sizeof(*smbox), GFP_KERNEL);
+	if (!smbox)
+		return -ENOMEM;
+
+	shmem = of_parse_phandle(cdev->of_node, "shmem", idx);
+	ret = of_address_to_resource(shmem, 0, &res);
+	of_node_put(shmem);
+	if (ret) {
+		dev_err(cdev, "failed to get SCMI %s shared memory\n", desc);
+		return ret;
+	}
+
+	size = resource_size(&res);
+	smbox->shmem = devm_ioremap(dev, res.start, size);
+	if (!smbox->shmem) {
+		dev_err(dev, "failed to ioremap SCMI %s shared memory\n", desc);
+		return -EADDRNOTAVAIL;
+	}
+
+	cl = &smbox->cl;
+	cl->dev = cdev;
+	cl->tx_prepare = tx ? tx_prepare : NULL;
+	cl->rx_callback = rx_callback;
+	cl->tx_block = false;
+	cl->knows_txdone = tx;
+
+	smbox->chan = mbox_request_channel(cl, tx ? 0 : 1);
+	if (IS_ERR(smbox->chan)) {
+		ret = PTR_ERR(smbox->chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(cdev, "failed to request SCMI %s mailbox\n",
+				tx ? "Tx" : "Rx");
+		return ret;
+	}
+
+	cinfo->transport_info = smbox;
+	smbox->cinfo = cinfo;
+
+	return 0;
+}
+
+static int mailbox_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	if (smbox && !IS_ERR(smbox->chan)) {
+		mbox_free_channel(smbox->chan);
+		cinfo->transport_info = NULL;
+		smbox->chan = NULL;
+		smbox->cinfo = NULL;
+	}
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int mailbox_send_message(struct scmi_chan_info *cinfo,
+				struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+	int ret;
+
+	ret = mbox_send_message(smbox->chan, xfer);
+
+	/* mbox_send_message returns non-negative value on success, so reset */
+	if (ret > 0)
+		ret = 0;
+
+	return ret;
+}
+
+static void mailbox_mark_txdone(struct scmi_chan_info *cinfo, int ret)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	/*
+	 * NOTE: we might prefer not to need the mailbox ticker to manage the
+	 * transfer queueing since the protocol layer queues things by itself.
+	 * Unfortunately, we have to kick the mailbox framework after we have
+	 * received our message.
+	 */
+	mbox_client_txdone(smbox->chan, ret);
+}
+
+static void mailbox_fetch_response(struct scmi_chan_info *cinfo,
+				   struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_fetch_response(smbox->shmem, xfer);
+}
+
+static void mailbox_fetch_notification(struct scmi_chan_info *cinfo,
+				       size_t max_len, struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_fetch_notification(smbox->shmem, max_len, xfer);
+}
+
+static void mailbox_clear_channel(struct scmi_chan_info *cinfo)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	shmem_clear_channel(smbox->shmem);
+}
+
+static bool
+mailbox_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+	struct scmi_mailbox *smbox = cinfo->transport_info;
+
+	return shmem_poll_done(smbox->shmem, xfer);
+}
+
+static const struct scmi_transport_ops scmi_mailbox_ops = {
+	.chan_available = mailbox_chan_available,
+	.chan_setup = mailbox_chan_setup,
+	.chan_free = mailbox_chan_free,
+	.send_message = mailbox_send_message,
+	.mark_txdone = mailbox_mark_txdone,
+	.fetch_response = mailbox_fetch_response,
+	.fetch_notification = mailbox_fetch_notification,
+	.clear_channel = mailbox_clear_channel,
+	.poll_done = mailbox_poll_done,
+};
+
+const struct scmi_desc scmi_mailbox_desc = {
+	.ops = &scmi_mailbox_ops,
+	.max_rx_timeout_ms = 30, /* We may increase this if required */
+	.max_msg = 20, /* Limited by MBOX_TX_QUEUE_LEN */
+	.max_msg_size = 128,
+};
diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
new file mode 100644
index 000000000..66196b293
--- /dev/null
+++ b/drivers/firmware/arm_scmi/notify.c
@@ -0,0 +1,1532 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Notification support
+ *
+ * Copyright (C) 2020 ARM Ltd.
+ */
+/**
+ * DOC: Theory of operation
+ *
+ * SCMI Protocol specification allows the platform to signal events to
+ * interested agents via notification messages: this is an implementation
+ * of the dispatch and delivery of such notifications to the interested users
+ * inside the Linux kernel.
+ *
+ * An SCMI Notification core instance is initialized for each active platform
+ * instance identified by the means of the usual &struct scmi_handle.
+ *
+ * Each SCMI Protocol implementation, during its initialization, registers with
+ * this core its set of supported events using scmi_register_protocol_events():
+ * all the needed descriptors are stored in the &struct registered_protocols and
+ * &struct registered_events arrays.
+ *
+ * Kernel users interested in some specific event can register their callbacks
+ * providing the usual notifier_block descriptor, since this core implements
+ * events' delivery using the standard Kernel notification chains machinery.
+ *
+ * Given the number of possible events defined by SCMI and the extensibility
+ * of the SCMI Protocol itself, the underlying notification chains are created
+ * and destroyed dynamically on demand depending on the number of users
+ * effectively registered for an event, so that no support structures or chains
+ * are allocated until at least one user has registered a notifier_block for
+ * such event. Similarly, events' generation itself is enabled at the platform
+ * level only after at least one user has registered, and it is shutdown after
+ * the last user for that event has gone.
+ *
+ * All users provided callbacks and allocated notification-chains are stored in
+ * the @registered_events_handlers hashtable. Callbacks' registration requests
+ * for still to be registered events are instead kept in the dedicated common
+ * hashtable @pending_events_handlers.
+ *
+ * An event is identified univocally by the tuple (proto_id, evt_id, src_id)
+ * and is served by its own dedicated notification chain; information contained
+ * in such tuples is used, in a few different ways, to generate the needed
+ * hash-keys.
+ *
+ * Here proto_id and evt_id are simply the protocol_id and message_id numbers
+ * as described in the SCMI Protocol specification, while src_id represents an
+ * optional, protocol dependent, source identifier (like domain_id, perf_id
+ * or sensor_id and so forth).
+ *
+ * Upon reception of a notification message from the platform the SCMI RX ISR
+ * passes the received message payload and some ancillary information (including
+ * an arrival timestamp in nanoseconds) to the core via @scmi_notify() which
+ * pushes the event-data itself on a protocol-dedicated kfifo queue for further
+ * deferred processing as specified in @scmi_events_dispatcher().
+ *
+ * Each protocol has it own dedicated work_struct and worker which, once kicked
+ * by the ISR, takes care to empty its own dedicated queue, deliverying the
+ * queued items into the proper notification-chain: notifications processing can
+ * proceed concurrently on distinct workers only between events belonging to
+ * different protocols while delivery of events within the same protocol is
+ * still strictly sequentially ordered by time of arrival.
+ *
+ * Events' information is then extracted from the SCMI Notification messages and
+ * conveyed, converted into a custom per-event report struct, as the void *data
+ * param to the user callback provided by the registered notifier_block, so that
+ * from the user perspective his callback will look invoked like:
+ *
+ * int user_cb(struct notifier_block *nb, unsigned long event_id, void *report)
+ *
+ */
+
+#define dev_fmt(fmt) "SCMI Notifications - " fmt
+#define pr_fmt(fmt) "SCMI Notifications - " fmt
+
+#include <linux/bitfield.h>
+#include <linux/bug.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/hashtable.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/kfifo.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/refcount.h>
+#include <linux/scmi_protocol.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "notify.h"
+
+#define SCMI_MAX_PROTO		256
+
+#define PROTO_ID_MASK		GENMASK(31, 24)
+#define EVT_ID_MASK		GENMASK(23, 16)
+#define SRC_ID_MASK		GENMASK(15, 0)
+
+/*
+ * Builds an unsigned 32bit key from the given input tuple to be used
+ * as a key in hashtables.
+ */
+#define MAKE_HASH_KEY(p, e, s)			\
+	(FIELD_PREP(PROTO_ID_MASK, (p)) |	\
+	   FIELD_PREP(EVT_ID_MASK, (e)) |	\
+	   FIELD_PREP(SRC_ID_MASK, (s)))
+
+#define MAKE_ALL_SRCS_KEY(p, e)		MAKE_HASH_KEY((p), (e), SRC_ID_MASK)
+
+/*
+ * Assumes that the stored obj includes its own hash-key in a field named 'key':
+ * with this simplification this macro can be equally used for all the objects'
+ * types hashed by this implementation.
+ *
+ * @__ht: The hashtable name
+ * @__obj: A pointer to the object type to be retrieved from the hashtable;
+ *	   it will be used as a cursor while scanning the hastable and it will
+ *	   be possibly left as NULL when @__k is not found
+ * @__k: The key to search for
+ */
+#define KEY_FIND(__ht, __obj, __k)				\
+({								\
+	typeof(__k) k_ = __k;					\
+	typeof(__obj) obj_;					\
+								\
+	hash_for_each_possible((__ht), obj_, hash, k_)		\
+		if (obj_->key == k_)				\
+			break;					\
+	__obj = obj_;						\
+})
+
+#define KEY_XTRACT_PROTO_ID(key)	FIELD_GET(PROTO_ID_MASK, (key))
+#define KEY_XTRACT_EVT_ID(key)		FIELD_GET(EVT_ID_MASK, (key))
+#define KEY_XTRACT_SRC_ID(key)		FIELD_GET(SRC_ID_MASK, (key))
+
+/*
+ * A set of macros used to access safely @registered_protocols and
+ * @registered_events arrays; these are fixed in size and each entry is possibly
+ * populated at protocols' registration time and then only read but NEVER
+ * modified or removed.
+ */
+#define SCMI_GET_PROTO(__ni, __pid)					\
+({									\
+	typeof(__ni) ni_ = __ni;					\
+	struct scmi_registered_events_desc *__pd = NULL;		\
+									\
+	if (ni_)							\
+		__pd = READ_ONCE(ni_->registered_protocols[(__pid)]);	\
+	__pd;								\
+})
+
+#define SCMI_GET_REVT_FROM_PD(__pd, __eid)				\
+({									\
+	typeof(__pd) pd_ = __pd;					\
+	typeof(__eid) eid_ = __eid;					\
+	struct scmi_registered_event *__revt = NULL;			\
+									\
+	if (pd_ && eid_ < pd_->num_events)				\
+		__revt = READ_ONCE(pd_->registered_events[eid_]);	\
+	__revt;								\
+})
+
+#define SCMI_GET_REVT(__ni, __pid, __eid)				\
+({									\
+	struct scmi_registered_event *__revt;				\
+	struct scmi_registered_events_desc *__pd;			\
+									\
+	__pd = SCMI_GET_PROTO((__ni), (__pid));				\
+	__revt = SCMI_GET_REVT_FROM_PD(__pd, (__eid));			\
+	__revt;								\
+})
+
+/* A couple of utility macros to limit cruft when calling protocols' helpers */
+#define REVT_NOTIFY_SET_STATUS(revt, eid, sid, state)		\
+({								\
+	typeof(revt) r = revt;					\
+	r->proto->ops->set_notify_enabled(r->proto->ni->handle,	\
+					(eid), (sid), (state));	\
+})
+
+#define REVT_NOTIFY_ENABLE(revt, eid, sid)			\
+	REVT_NOTIFY_SET_STATUS((revt), (eid), (sid), true)
+
+#define REVT_NOTIFY_DISABLE(revt, eid, sid)			\
+	REVT_NOTIFY_SET_STATUS((revt), (eid), (sid), false)
+
+#define REVT_FILL_REPORT(revt, ...)				\
+({								\
+	typeof(revt) r = revt;					\
+	r->proto->ops->fill_custom_report(r->proto->ni->handle,	\
+					  __VA_ARGS__);		\
+})
+
+#define SCMI_PENDING_HASH_SZ		4
+#define SCMI_REGISTERED_HASH_SZ		6
+
+struct scmi_registered_events_desc;
+
+/**
+ * struct scmi_notify_instance  - Represents an instance of the notification
+ * core
+ * @gid: GroupID used for devres
+ * @handle: A reference to the platform instance
+ * @init_work: A work item to perform final initializations of pending handlers
+ * @notify_wq: A reference to the allocated Kernel cmwq
+ * @pending_mtx: A mutex to protect @pending_events_handlers
+ * @registered_protocols: A statically allocated array containing pointers to
+ *			  all the registered protocol-level specific information
+ *			  related to events' handling
+ * @pending_events_handlers: An hashtable containing all pending events'
+ *			     handlers descriptors
+ *
+ * Each platform instance, represented by a handle, has its own instance of
+ * the notification subsystem represented by this structure.
+ */
+struct scmi_notify_instance {
+	void			*gid;
+	struct scmi_handle	*handle;
+	struct work_struct	init_work;
+	struct workqueue_struct	*notify_wq;
+	/* lock to protect pending_events_handlers */
+	struct mutex		pending_mtx;
+	struct scmi_registered_events_desc	**registered_protocols;
+	DECLARE_HASHTABLE(pending_events_handlers, SCMI_PENDING_HASH_SZ);
+};
+
+/**
+ * struct events_queue  - Describes a queue and its associated worker
+ * @sz: Size in bytes of the related kfifo
+ * @kfifo: A dedicated Kernel kfifo descriptor
+ * @notify_work: A custom work item bound to this queue
+ * @wq: A reference to the associated workqueue
+ *
+ * Each protocol has its own dedicated events_queue descriptor.
+ */
+struct events_queue {
+	size_t			sz;
+	struct kfifo		kfifo;
+	struct work_struct	notify_work;
+	struct workqueue_struct	*wq;
+};
+
+/**
+ * struct scmi_event_header  - A utility header
+ * @timestamp: The timestamp, in nanoseconds (boottime), which was associated
+ *	       to this event as soon as it entered the SCMI RX ISR
+ * @payld_sz: Effective size of the embedded message payload which follows
+ * @evt_id: Event ID (corresponds to the Event MsgID for this Protocol)
+ * @payld: A reference to the embedded event payload
+ *
+ * This header is prepended to each received event message payload before
+ * queueing it on the related &struct events_queue.
+ */
+struct scmi_event_header {
+	ktime_t timestamp;
+	size_t payld_sz;
+	unsigned char evt_id;
+	unsigned char payld[];
+};
+
+struct scmi_registered_event;
+
+/**
+ * struct scmi_registered_events_desc  - Protocol Specific information
+ * @id: Protocol ID
+ * @ops: Protocol specific and event-related operations
+ * @equeue: The embedded per-protocol events_queue
+ * @ni: A reference to the initialized instance descriptor
+ * @eh: A reference to pre-allocated buffer to be used as a scratch area by the
+ *	deferred worker when fetching data from the kfifo
+ * @eh_sz: Size of the pre-allocated buffer @eh
+ * @in_flight: A reference to an in flight &struct scmi_registered_event
+ * @num_events: Number of events in @registered_events
+ * @registered_events: A dynamically allocated array holding all the registered
+ *		       events' descriptors, whose fixed-size is determined at
+ *		       compile time.
+ * @registered_mtx: A mutex to protect @registered_events_handlers
+ * @registered_events_handlers: An hashtable containing all events' handlers
+ *				descriptors registered for this protocol
+ *
+ * All protocols that register at least one event have their protocol-specific
+ * information stored here, together with the embedded allocated events_queue.
+ * These descriptors are stored in the @registered_protocols array at protocol
+ * registration time.
+ *
+ * Once these descriptors are successfully registered, they are NEVER again
+ * removed or modified since protocols do not unregister ever, so that, once
+ * we safely grab a NON-NULL reference from the array we can keep it and use it.
+ */
+struct scmi_registered_events_desc {
+	u8				id;
+	const struct scmi_event_ops	*ops;
+	struct events_queue		equeue;
+	struct scmi_notify_instance	*ni;
+	struct scmi_event_header	*eh;
+	size_t				eh_sz;
+	void				*in_flight;
+	int				num_events;
+	struct scmi_registered_event	**registered_events;
+	/* mutex to protect registered_events_handlers */
+	struct mutex			registered_mtx;
+	DECLARE_HASHTABLE(registered_events_handlers, SCMI_REGISTERED_HASH_SZ);
+};
+
+/**
+ * struct scmi_registered_event  - Event Specific Information
+ * @proto: A reference to the associated protocol descriptor
+ * @evt: A reference to the associated event descriptor (as provided at
+ *       registration time)
+ * @report: A pre-allocated buffer used by the deferred worker to fill a
+ *	    customized event report
+ * @num_sources: The number of possible sources for this event as stated at
+ *		 events' registration time
+ * @sources: A reference to a dynamically allocated array used to refcount the
+ *	     events' enable requests for all the existing sources
+ * @sources_mtx: A mutex to serialize the access to @sources
+ *
+ * All registered events are represented by one of these structures that are
+ * stored in the @registered_events array at protocol registration time.
+ *
+ * Once these descriptors are successfully registered, they are NEVER again
+ * removed or modified since protocols do not unregister ever, so that once we
+ * safely grab a NON-NULL reference from the table we can keep it and use it.
+ */
+struct scmi_registered_event {
+	struct scmi_registered_events_desc *proto;
+	const struct scmi_event	*evt;
+	void		*report;
+	u32		num_sources;
+	refcount_t	*sources;
+	/* locking to serialize the access to sources */
+	struct mutex	sources_mtx;
+};
+
+/**
+ * struct scmi_event_handler  - Event handler information
+ * @key: The used hashkey
+ * @users: A reference count for number of active users for this handler
+ * @r_evt: A reference to the associated registered event; when this is NULL
+ *	   this handler is pending, which means that identifies a set of
+ *	   callbacks intended to be attached to an event which is still not
+ *	   known nor registered by any protocol at that point in time
+ * @chain: The notification chain dedicated to this specific event tuple
+ * @hash: The hlist_node used for collision handling
+ * @enabled: A boolean which records if event's generation has been already
+ *	     enabled for this handler as a whole
+ *
+ * This structure collects all the information needed to process a received
+ * event identified by the tuple (proto_id, evt_id, src_id).
+ * These descriptors are stored in a per-protocol @registered_events_handlers
+ * table using as a key a value derived from that tuple.
+ */
+struct scmi_event_handler {
+	u32				key;
+	refcount_t			users;
+	struct scmi_registered_event	*r_evt;
+	struct blocking_notifier_head	chain;
+	struct hlist_node		hash;
+	bool				enabled;
+};
+
+#define IS_HNDL_PENDING(hndl)	(!(hndl)->r_evt)
+
+static struct scmi_event_handler *
+scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key);
+static void scmi_put_active_handler(struct scmi_notify_instance *ni,
+				    struct scmi_event_handler *hndl);
+static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
+				      struct scmi_event_handler *hndl);
+
+/**
+ * scmi_lookup_and_call_event_chain()  - Lookup the proper chain and call it
+ * @ni: A reference to the notification instance to use
+ * @evt_key: The key to use to lookup the related notification chain
+ * @report: The customized event-specific report to pass down to the callbacks
+ *	    as their *data parameter.
+ */
+static inline void
+scmi_lookup_and_call_event_chain(struct scmi_notify_instance *ni,
+				 u32 evt_key, void *report)
+{
+	int ret;
+	struct scmi_event_handler *hndl;
+
+	/*
+	 * Here ensure the event handler cannot vanish while using it.
+	 * It is legitimate, though, for an handler not to be found at all here,
+	 * e.g. when it has been unregistered by the user after some events had
+	 * already been queued.
+	 */
+	hndl = scmi_get_active_handler(ni, evt_key);
+	if (!hndl)
+		return;
+
+	ret = blocking_notifier_call_chain(&hndl->chain,
+					   KEY_XTRACT_EVT_ID(evt_key),
+					   report);
+	/* Notifiers are NOT supposed to cut the chain ... */
+	WARN_ON_ONCE(ret & NOTIFY_STOP_MASK);
+
+	scmi_put_active_handler(ni, hndl);
+}
+
+/**
+ * scmi_process_event_header()  - Dequeue and process an event header
+ * @eq: The queue to use
+ * @pd: The protocol descriptor to use
+ *
+ * Read an event header from the protocol queue into the dedicated scratch
+ * buffer and looks for a matching registered event; in case an anomalously
+ * sized read is detected just flush the queue.
+ *
+ * Return:
+ * * a reference to the matching registered event when found
+ * * ERR_PTR(-EINVAL) when NO registered event could be found
+ * * NULL when the queue is empty
+ */
+static inline struct scmi_registered_event *
+scmi_process_event_header(struct events_queue *eq,
+			  struct scmi_registered_events_desc *pd)
+{
+	unsigned int outs;
+	struct scmi_registered_event *r_evt;
+
+	outs = kfifo_out(&eq->kfifo, pd->eh,
+			 sizeof(struct scmi_event_header));
+	if (!outs)
+		return NULL;
+	if (outs != sizeof(struct scmi_event_header)) {
+		dev_err(pd->ni->handle->dev, "corrupted EVT header. Flush.\n");
+		kfifo_reset_out(&eq->kfifo);
+		return NULL;
+	}
+
+	r_evt = SCMI_GET_REVT_FROM_PD(pd, pd->eh->evt_id);
+	if (!r_evt)
+		r_evt = ERR_PTR(-EINVAL);
+
+	return r_evt;
+}
+
+/**
+ * scmi_process_event_payload()  - Dequeue and process an event payload
+ * @eq: The queue to use
+ * @pd: The protocol descriptor to use
+ * @r_evt: The registered event descriptor to use
+ *
+ * Read an event payload from the protocol queue into the dedicated scratch
+ * buffer, fills a custom report and then look for matching event handlers and
+ * call them; skip any unknown event (as marked by scmi_process_event_header())
+ * and in case an anomalously sized read is detected just flush the queue.
+ *
+ * Return: False when the queue is empty
+ */
+static inline bool
+scmi_process_event_payload(struct events_queue *eq,
+			   struct scmi_registered_events_desc *pd,
+			   struct scmi_registered_event *r_evt)
+{
+	u32 src_id, key;
+	unsigned int outs;
+	void *report = NULL;
+
+	outs = kfifo_out(&eq->kfifo, pd->eh->payld, pd->eh->payld_sz);
+	if (!outs)
+		return false;
+
+	/* Any in-flight event has now been officially processed */
+	pd->in_flight = NULL;
+
+	if (outs != pd->eh->payld_sz) {
+		dev_err(pd->ni->handle->dev, "corrupted EVT Payload. Flush.\n");
+		kfifo_reset_out(&eq->kfifo);
+		return false;
+	}
+
+	if (IS_ERR(r_evt)) {
+		dev_warn(pd->ni->handle->dev,
+			 "SKIP UNKNOWN EVT - proto:%X  evt:%d\n",
+			 pd->id, pd->eh->evt_id);
+		return true;
+	}
+
+	report = REVT_FILL_REPORT(r_evt, pd->eh->evt_id, pd->eh->timestamp,
+				  pd->eh->payld, pd->eh->payld_sz,
+				  r_evt->report, &src_id);
+	if (!report) {
+		dev_err(pd->ni->handle->dev,
+			"report not available - proto:%X  evt:%d\n",
+			pd->id, pd->eh->evt_id);
+		return true;
+	}
+
+	/* At first search for a generic ALL src_ids handler... */
+	key = MAKE_ALL_SRCS_KEY(pd->id, pd->eh->evt_id);
+	scmi_lookup_and_call_event_chain(pd->ni, key, report);
+
+	/* ...then search for any specific src_id */
+	key = MAKE_HASH_KEY(pd->id, pd->eh->evt_id, src_id);
+	scmi_lookup_and_call_event_chain(pd->ni, key, report);
+
+	return true;
+}
+
+/**
+ * scmi_events_dispatcher()  - Common worker logic for all work items.
+ * @work: The work item to use, which is associated to a dedicated events_queue
+ *
+ * Logic:
+ *  1. dequeue one pending RX notification (queued in SCMI RX ISR context)
+ *  2. generate a custom event report from the received event message
+ *  3. lookup for any registered ALL_SRC_IDs handler:
+ *    - > call the related notification chain passing in the report
+ *  4. lookup for any registered specific SRC_ID handler:
+ *    - > call the related notification chain passing in the report
+ *
+ * Note that:
+ * * a dedicated per-protocol kfifo queue is used: in this way an anomalous
+ *   flood of events cannot saturate other protocols' queues.
+ * * each per-protocol queue is associated to a distinct work_item, which
+ *   means, in turn, that:
+ *   + all protocols can process their dedicated queues concurrently
+ *     (since notify_wq:max_active != 1)
+ *   + anyway at most one worker instance is allowed to run on the same queue
+ *     concurrently: this ensures that we can have only one concurrent
+ *     reader/writer on the associated kfifo, so that we can use it lock-less
+ *
+ * Context: Process context.
+ */
+static void scmi_events_dispatcher(struct work_struct *work)
+{
+	struct events_queue *eq;
+	struct scmi_registered_events_desc *pd;
+	struct scmi_registered_event *r_evt;
+
+	eq = container_of(work, struct events_queue, notify_work);
+	pd = container_of(eq, struct scmi_registered_events_desc, equeue);
+	/*
+	 * In order to keep the queue lock-less and the number of memcopies
+	 * to the bare minimum needed, the dispatcher accounts for the
+	 * possibility of per-protocol in-flight events: i.e. an event whose
+	 * reception could end up being split across two subsequent runs of this
+	 * worker, first the header, then the payload.
+	 */
+	do {
+		if (!pd->in_flight) {
+			r_evt = scmi_process_event_header(eq, pd);
+			if (!r_evt)
+				break;
+			pd->in_flight = r_evt;
+		} else {
+			r_evt = pd->in_flight;
+		}
+	} while (scmi_process_event_payload(eq, pd, r_evt));
+}
+
+/**
+ * scmi_notify()  - Queues a notification for further deferred processing
+ * @handle: The handle identifying the platform instance from which the
+ *	    dispatched event is generated
+ * @proto_id: Protocol ID
+ * @evt_id: Event ID (msgID)
+ * @buf: Event Message Payload (without the header)
+ * @len: Event Message Payload size
+ * @ts: RX Timestamp in nanoseconds (boottime)
+ *
+ * Context: Called in interrupt context to queue a received event for
+ * deferred processing.
+ *
+ * Return: 0 on Success
+ */
+int scmi_notify(const struct scmi_handle *handle, u8 proto_id, u8 evt_id,
+		const void *buf, size_t len, ktime_t ts)
+{
+	struct scmi_registered_event *r_evt;
+	struct scmi_event_header eh;
+	struct scmi_notify_instance *ni;
+
+	/* Ensure notify_priv is updated */
+	smp_rmb();
+	if (!handle->notify_priv)
+		return 0;
+	ni = handle->notify_priv;
+
+	r_evt = SCMI_GET_REVT(ni, proto_id, evt_id);
+	if (!r_evt)
+		return -EINVAL;
+
+	if (len > r_evt->evt->max_payld_sz) {
+		dev_err(handle->dev, "discard badly sized message\n");
+		return -EINVAL;
+	}
+	if (kfifo_avail(&r_evt->proto->equeue.kfifo) < sizeof(eh) + len) {
+		dev_warn(handle->dev,
+			 "queue full, dropping proto_id:%d  evt_id:%d  ts:%lld\n",
+			 proto_id, evt_id, ktime_to_ns(ts));
+		return -ENOMEM;
+	}
+
+	eh.timestamp = ts;
+	eh.evt_id = evt_id;
+	eh.payld_sz = len;
+	/*
+	 * Header and payload are enqueued with two distinct kfifo_in() (so non
+	 * atomic), but this situation is handled properly on the consumer side
+	 * with in-flight events tracking.
+	 */
+	kfifo_in(&r_evt->proto->equeue.kfifo, &eh, sizeof(eh));
+	kfifo_in(&r_evt->proto->equeue.kfifo, buf, len);
+	/*
+	 * Don't care about return value here since we just want to ensure that
+	 * a work is queued all the times whenever some items have been pushed
+	 * on the kfifo:
+	 * - if work was already queued it will simply fail to queue a new one
+	 *   since it is not needed
+	 * - if work was not queued already it will be now, even in case work
+	 *   was in fact already running: this behavior avoids any possible race
+	 *   when this function pushes new items onto the kfifos after the
+	 *   related executing worker had already determined the kfifo to be
+	 *   empty and it was terminating.
+	 */
+	queue_work(r_evt->proto->equeue.wq,
+		   &r_evt->proto->equeue.notify_work);
+
+	return 0;
+}
+
+/**
+ * scmi_kfifo_free()  - Devres action helper to free the kfifo
+ * @kfifo: The kfifo to free
+ */
+static void scmi_kfifo_free(void *kfifo)
+{
+	kfifo_free((struct kfifo *)kfifo);
+}
+
+/**
+ * scmi_initialize_events_queue()  - Allocate/Initialize a kfifo buffer
+ * @ni: A reference to the notification instance to use
+ * @equeue: The events_queue to initialize
+ * @sz: Size of the kfifo buffer to allocate
+ *
+ * Allocate a buffer for the kfifo and initialize it.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_initialize_events_queue(struct scmi_notify_instance *ni,
+					struct events_queue *equeue, size_t sz)
+{
+	int ret;
+
+	if (kfifo_alloc(&equeue->kfifo, sz, GFP_KERNEL))
+		return -ENOMEM;
+	/* Size could have been roundup to power-of-two */
+	equeue->sz = kfifo_size(&equeue->kfifo);
+
+	ret = devm_add_action_or_reset(ni->handle->dev, scmi_kfifo_free,
+				       &equeue->kfifo);
+	if (ret)
+		return ret;
+
+	INIT_WORK(&equeue->notify_work, scmi_events_dispatcher);
+	equeue->wq = ni->notify_wq;
+
+	return ret;
+}
+
+/**
+ * scmi_allocate_registered_events_desc()  - Allocate a registered events'
+ * descriptor
+ * @ni: A reference to the &struct scmi_notify_instance notification instance
+ *	to use
+ * @proto_id: Protocol ID
+ * @queue_sz: Size of the associated queue to allocate
+ * @eh_sz: Size of the event header scratch area to pre-allocate
+ * @num_events: Number of events to support (size of @registered_events)
+ * @ops: Pointer to a struct holding references to protocol specific helpers
+ *	 needed during events handling
+ *
+ * It is supposed to be called only once for each protocol at protocol
+ * initialization time, so it warns if the requested protocol is found already
+ * registered.
+ *
+ * Return: The allocated and registered descriptor on Success
+ */
+static struct scmi_registered_events_desc *
+scmi_allocate_registered_events_desc(struct scmi_notify_instance *ni,
+				     u8 proto_id, size_t queue_sz, size_t eh_sz,
+				     int num_events,
+				     const struct scmi_event_ops *ops)
+{
+	int ret;
+	struct scmi_registered_events_desc *pd;
+
+	/* Ensure protocols are up to date */
+	smp_rmb();
+	if (WARN_ON(ni->registered_protocols[proto_id]))
+		return ERR_PTR(-EINVAL);
+
+	pd = devm_kzalloc(ni->handle->dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return ERR_PTR(-ENOMEM);
+	pd->id = proto_id;
+	pd->ops = ops;
+	pd->ni = ni;
+
+	ret = scmi_initialize_events_queue(ni, &pd->equeue, queue_sz);
+	if (ret)
+		return ERR_PTR(ret);
+
+	pd->eh = devm_kzalloc(ni->handle->dev, eh_sz, GFP_KERNEL);
+	if (!pd->eh)
+		return ERR_PTR(-ENOMEM);
+	pd->eh_sz = eh_sz;
+
+	pd->registered_events = devm_kcalloc(ni->handle->dev, num_events,
+					     sizeof(char *), GFP_KERNEL);
+	if (!pd->registered_events)
+		return ERR_PTR(-ENOMEM);
+	pd->num_events = num_events;
+
+	/* Initialize per protocol handlers table */
+	mutex_init(&pd->registered_mtx);
+	hash_init(pd->registered_events_handlers);
+
+	return pd;
+}
+
+/**
+ * scmi_register_protocol_events()  - Register Protocol Events with the core
+ * @handle: The handle identifying the platform instance against which the
+ *	    the protocol's events are registered
+ * @proto_id: Protocol ID
+ * @queue_sz: Size in bytes of the associated queue to be allocated
+ * @ops: Protocol specific event-related operations
+ * @evt: Event descriptor array
+ * @num_events: Number of events in @evt array
+ * @num_sources: Number of possible sources for this protocol on this
+ *		 platform.
+ *
+ * Used by SCMI Protocols initialization code to register with the notification
+ * core the list of supported events and their descriptors: takes care to
+ * pre-allocate and store all needed descriptors, scratch buffers and event
+ * queues.
+ *
+ * Return: 0 on Success
+ */
+int scmi_register_protocol_events(const struct scmi_handle *handle,
+				  u8 proto_id, size_t queue_sz,
+				  const struct scmi_event_ops *ops,
+				  const struct scmi_event *evt, int num_events,
+				  int num_sources)
+{
+	int i;
+	size_t payld_sz = 0;
+	struct scmi_registered_events_desc *pd;
+	struct scmi_notify_instance *ni;
+
+	if (!ops || !evt)
+		return -EINVAL;
+
+	/* Ensure notify_priv is updated */
+	smp_rmb();
+	if (!handle->notify_priv)
+		return -ENOMEM;
+	ni = handle->notify_priv;
+
+	/* Attach to the notification main devres group */
+	if (!devres_open_group(ni->handle->dev, ni->gid, GFP_KERNEL))
+		return -ENOMEM;
+
+	for (i = 0; i < num_events; i++)
+		payld_sz = max_t(size_t, payld_sz, evt[i].max_payld_sz);
+	payld_sz += sizeof(struct scmi_event_header);
+
+	pd = scmi_allocate_registered_events_desc(ni, proto_id, queue_sz,
+						  payld_sz, num_events, ops);
+	if (IS_ERR(pd))
+		goto err;
+
+	for (i = 0; i < num_events; i++, evt++) {
+		struct scmi_registered_event *r_evt;
+
+		r_evt = devm_kzalloc(ni->handle->dev, sizeof(*r_evt),
+				     GFP_KERNEL);
+		if (!r_evt)
+			goto err;
+		r_evt->proto = pd;
+		r_evt->evt = evt;
+
+		r_evt->sources = devm_kcalloc(ni->handle->dev, num_sources,
+					      sizeof(refcount_t), GFP_KERNEL);
+		if (!r_evt->sources)
+			goto err;
+		r_evt->num_sources = num_sources;
+		mutex_init(&r_evt->sources_mtx);
+
+		r_evt->report = devm_kzalloc(ni->handle->dev,
+					     evt->max_report_sz, GFP_KERNEL);
+		if (!r_evt->report)
+			goto err;
+
+		pd->registered_events[i] = r_evt;
+		/* Ensure events are updated */
+		smp_wmb();
+		dev_dbg(handle->dev, "registered event - %lX\n",
+			MAKE_ALL_SRCS_KEY(r_evt->proto->id, r_evt->evt->id));
+	}
+
+	/* Register protocol and events...it will never be removed */
+	ni->registered_protocols[proto_id] = pd;
+	/* Ensure protocols are updated */
+	smp_wmb();
+
+	devres_close_group(ni->handle->dev, ni->gid);
+
+	/*
+	 * Finalize any pending events' handler which could have been waiting
+	 * for this protocol's events registration.
+	 */
+	schedule_work(&ni->init_work);
+
+	return 0;
+
+err:
+	dev_warn(handle->dev, "Proto:%X - Registration Failed !\n", proto_id);
+	/* A failing protocol registration does not trigger full failure */
+	devres_close_group(ni->handle->dev, ni->gid);
+
+	return -ENOMEM;
+}
+
+/**
+ * scmi_allocate_event_handler()  - Allocate Event handler
+ * @ni: A reference to the notification instance to use
+ * @evt_key: 32bit key uniquely bind to the event identified by the tuple
+ *	     (proto_id, evt_id, src_id)
+ *
+ * Allocate an event handler and related notification chain associated with
+ * the provided event handler key.
+ * Note that, at this point, a related registered_event is still to be
+ * associated to this handler descriptor (hndl->r_evt == NULL), so the handler
+ * is initialized as pending.
+ *
+ * Context: Assumes to be called with @pending_mtx already acquired.
+ * Return: the freshly allocated structure on Success
+ */
+static struct scmi_event_handler *
+scmi_allocate_event_handler(struct scmi_notify_instance *ni, u32 evt_key)
+{
+	struct scmi_event_handler *hndl;
+
+	hndl = kzalloc(sizeof(*hndl), GFP_KERNEL);
+	if (!hndl)
+		return NULL;
+	hndl->key = evt_key;
+	BLOCKING_INIT_NOTIFIER_HEAD(&hndl->chain);
+	refcount_set(&hndl->users, 1);
+	/* New handlers are created pending */
+	hash_add(ni->pending_events_handlers, &hndl->hash, hndl->key);
+
+	return hndl;
+}
+
+/**
+ * scmi_free_event_handler()  - Free the provided Event handler
+ * @hndl: The event handler structure to free
+ *
+ * Context: Assumes to be called with proper locking acquired depending
+ *	    on the situation.
+ */
+static void scmi_free_event_handler(struct scmi_event_handler *hndl)
+{
+	hash_del(&hndl->hash);
+	kfree(hndl);
+}
+
+/**
+ * scmi_bind_event_handler()  - Helper to attempt binding an handler to an event
+ * @ni: A reference to the notification instance to use
+ * @hndl: The event handler to bind
+ *
+ * If an associated registered event is found, move the handler from the pending
+ * into the registered table.
+ *
+ * Context: Assumes to be called with @pending_mtx already acquired.
+ *
+ * Return: 0 on Success
+ */
+static inline int scmi_bind_event_handler(struct scmi_notify_instance *ni,
+					  struct scmi_event_handler *hndl)
+{
+	struct scmi_registered_event *r_evt;
+
+	r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(hndl->key),
+			      KEY_XTRACT_EVT_ID(hndl->key));
+	if (!r_evt)
+		return -EINVAL;
+
+	/* Remove from pending and insert into registered */
+	hash_del(&hndl->hash);
+	hndl->r_evt = r_evt;
+	mutex_lock(&r_evt->proto->registered_mtx);
+	hash_add(r_evt->proto->registered_events_handlers,
+		 &hndl->hash, hndl->key);
+	mutex_unlock(&r_evt->proto->registered_mtx);
+
+	return 0;
+}
+
+/**
+ * scmi_valid_pending_handler()  - Helper to check pending status of handlers
+ * @ni: A reference to the notification instance to use
+ * @hndl: The event handler to check
+ *
+ * An handler is considered pending when its r_evt == NULL, because the related
+ * event was still unknown at handler's registration time; anyway, since all
+ * protocols register their supported events once for all at protocols'
+ * initialization time, a pending handler cannot be considered valid anymore if
+ * the underlying event (which it is waiting for), belongs to an already
+ * initialized and registered protocol.
+ *
+ * Return: 0 on Success
+ */
+static inline int scmi_valid_pending_handler(struct scmi_notify_instance *ni,
+					     struct scmi_event_handler *hndl)
+{
+	struct scmi_registered_events_desc *pd;
+
+	if (!IS_HNDL_PENDING(hndl))
+		return -EINVAL;
+
+	pd = SCMI_GET_PROTO(ni, KEY_XTRACT_PROTO_ID(hndl->key));
+	if (pd)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * scmi_register_event_handler()  - Register whenever possible an Event handler
+ * @ni: A reference to the notification instance to use
+ * @hndl: The event handler to register
+ *
+ * At first try to bind an event handler to its associated event, then check if
+ * it was at least a valid pending handler: if it was not bound nor valid return
+ * false.
+ *
+ * Valid pending incomplete bindings will be periodically retried by a dedicated
+ * worker which is kicked each time a new protocol completes its own
+ * registration phase.
+ *
+ * Context: Assumes to be called with @pending_mtx acquired.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_register_event_handler(struct scmi_notify_instance *ni,
+				       struct scmi_event_handler *hndl)
+{
+	int ret;
+
+	ret = scmi_bind_event_handler(ni, hndl);
+	if (!ret) {
+		dev_dbg(ni->handle->dev, "registered NEW handler - key:%X\n",
+			hndl->key);
+	} else {
+		ret = scmi_valid_pending_handler(ni, hndl);
+		if (!ret)
+			dev_dbg(ni->handle->dev,
+				"registered PENDING handler - key:%X\n",
+				hndl->key);
+	}
+
+	return ret;
+}
+
+/**
+ * __scmi_event_handler_get_ops()  - Utility to get or create an event handler
+ * @ni: A reference to the notification instance to use
+ * @evt_key: The event key to use
+ * @create: A boolean flag to specify if a handler must be created when
+ *	    not already existent
+ *
+ * Search for the desired handler matching the key in both the per-protocol
+ * registered table and the common pending table:
+ * * if found adjust users refcount
+ * * if not found and @create is true, create and register the new handler:
+ *   handler could end up being registered as pending if no matching event
+ *   could be found.
+ *
+ * An handler is guaranteed to reside in one and only one of the tables at
+ * any one time; to ensure this the whole search and create is performed
+ * holding the @pending_mtx lock, with @registered_mtx additionally acquired
+ * if needed.
+ *
+ * Note that when a nested acquisition of these mutexes is needed the locking
+ * order is always (same as in @init_work):
+ * 1. pending_mtx
+ * 2. registered_mtx
+ *
+ * Events generation is NOT enabled right after creation within this routine
+ * since at creation time we usually want to have all setup and ready before
+ * events really start flowing.
+ *
+ * Return: A properly refcounted handler on Success, NULL on Failure
+ */
+static inline struct scmi_event_handler *
+__scmi_event_handler_get_ops(struct scmi_notify_instance *ni,
+			     u32 evt_key, bool create)
+{
+	struct scmi_registered_event *r_evt;
+	struct scmi_event_handler *hndl = NULL;
+
+	r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key),
+			      KEY_XTRACT_EVT_ID(evt_key));
+
+	mutex_lock(&ni->pending_mtx);
+	/* Search registered events at first ... if possible at all */
+	if (r_evt) {
+		mutex_lock(&r_evt->proto->registered_mtx);
+		hndl = KEY_FIND(r_evt->proto->registered_events_handlers,
+				hndl, evt_key);
+		if (hndl)
+			refcount_inc(&hndl->users);
+		mutex_unlock(&r_evt->proto->registered_mtx);
+	}
+
+	/* ...then amongst pending. */
+	if (!hndl) {
+		hndl = KEY_FIND(ni->pending_events_handlers, hndl, evt_key);
+		if (hndl)
+			refcount_inc(&hndl->users);
+	}
+
+	/* Create if still not found and required */
+	if (!hndl && create) {
+		hndl = scmi_allocate_event_handler(ni, evt_key);
+		if (hndl && scmi_register_event_handler(ni, hndl)) {
+			dev_dbg(ni->handle->dev,
+				"purging UNKNOWN handler - key:%X\n",
+				hndl->key);
+			/* this hndl can be only a pending one */
+			scmi_put_handler_unlocked(ni, hndl);
+			hndl = NULL;
+		}
+	}
+	mutex_unlock(&ni->pending_mtx);
+
+	return hndl;
+}
+
+static struct scmi_event_handler *
+scmi_get_handler(struct scmi_notify_instance *ni, u32 evt_key)
+{
+	return __scmi_event_handler_get_ops(ni, evt_key, false);
+}
+
+static struct scmi_event_handler *
+scmi_get_or_create_handler(struct scmi_notify_instance *ni, u32 evt_key)
+{
+	return __scmi_event_handler_get_ops(ni, evt_key, true);
+}
+
+/**
+ * scmi_get_active_handler()  - Helper to get active handlers only
+ * @ni: A reference to the notification instance to use
+ * @evt_key: The event key to use
+ *
+ * Search for the desired handler matching the key only in the per-protocol
+ * table of registered handlers: this is called only from the dispatching path
+ * so want to be as quick as possible and do not care about pending.
+ *
+ * Return: A properly refcounted active handler
+ */
+static struct scmi_event_handler *
+scmi_get_active_handler(struct scmi_notify_instance *ni, u32 evt_key)
+{
+	struct scmi_registered_event *r_evt;
+	struct scmi_event_handler *hndl = NULL;
+
+	r_evt = SCMI_GET_REVT(ni, KEY_XTRACT_PROTO_ID(evt_key),
+			      KEY_XTRACT_EVT_ID(evt_key));
+	if (r_evt) {
+		mutex_lock(&r_evt->proto->registered_mtx);
+		hndl = KEY_FIND(r_evt->proto->registered_events_handlers,
+				hndl, evt_key);
+		if (hndl)
+			refcount_inc(&hndl->users);
+		mutex_unlock(&r_evt->proto->registered_mtx);
+	}
+
+	return hndl;
+}
+
+/**
+ * __scmi_enable_evt()  - Enable/disable events generation
+ * @r_evt: The registered event to act upon
+ * @src_id: The src_id to act upon
+ * @enable: The action to perform: true->Enable, false->Disable
+ *
+ * Takes care of proper refcounting while performing enable/disable: handles
+ * the special case of ALL sources requests by itself.
+ * Returns successfully if at least one of the required src_id has been
+ * successfully enabled/disabled.
+ *
+ * Return: 0 on Success
+ */
+static inline int __scmi_enable_evt(struct scmi_registered_event *r_evt,
+				    u32 src_id, bool enable)
+{
+	int retvals = 0;
+	u32 num_sources;
+	refcount_t *sid;
+
+	if (src_id == SRC_ID_MASK) {
+		src_id = 0;
+		num_sources = r_evt->num_sources;
+	} else if (src_id < r_evt->num_sources) {
+		num_sources = 1;
+	} else {
+		return -EINVAL;
+	}
+
+	mutex_lock(&r_evt->sources_mtx);
+	if (enable) {
+		for (; num_sources; src_id++, num_sources--) {
+			int ret = 0;
+
+			sid = &r_evt->sources[src_id];
+			if (refcount_read(sid) == 0) {
+				ret = REVT_NOTIFY_ENABLE(r_evt, r_evt->evt->id,
+							 src_id);
+				if (!ret)
+					refcount_set(sid, 1);
+			} else {
+				refcount_inc(sid);
+			}
+			retvals += !ret;
+		}
+	} else {
+		for (; num_sources; src_id++, num_sources--) {
+			sid = &r_evt->sources[src_id];
+			if (refcount_dec_and_test(sid))
+				REVT_NOTIFY_DISABLE(r_evt,
+						    r_evt->evt->id, src_id);
+		}
+		retvals = 1;
+	}
+	mutex_unlock(&r_evt->sources_mtx);
+
+	return retvals ? 0 : -EINVAL;
+}
+
+static int scmi_enable_events(struct scmi_event_handler *hndl)
+{
+	int ret = 0;
+
+	if (!hndl->enabled) {
+		ret = __scmi_enable_evt(hndl->r_evt,
+					KEY_XTRACT_SRC_ID(hndl->key), true);
+		if (!ret)
+			hndl->enabled = true;
+	}
+
+	return ret;
+}
+
+static int scmi_disable_events(struct scmi_event_handler *hndl)
+{
+	int ret = 0;
+
+	if (hndl->enabled) {
+		ret = __scmi_enable_evt(hndl->r_evt,
+					KEY_XTRACT_SRC_ID(hndl->key), false);
+		if (!ret)
+			hndl->enabled = false;
+	}
+
+	return ret;
+}
+
+/**
+ * scmi_put_handler_unlocked()  - Put an event handler
+ * @ni: A reference to the notification instance to use
+ * @hndl: The event handler to act upon
+ *
+ * After having got exclusive access to the registered handlers hashtable,
+ * update the refcount and if @hndl is no more in use by anyone:
+ * * ask for events' generation disabling
+ * * unregister and free the handler itself
+ *
+ * Context: Assumes all the proper locking has been managed by the caller.
+ */
+static void scmi_put_handler_unlocked(struct scmi_notify_instance *ni,
+				      struct scmi_event_handler *hndl)
+{
+	if (refcount_dec_and_test(&hndl->users)) {
+		if (!IS_HNDL_PENDING(hndl))
+			scmi_disable_events(hndl);
+		scmi_free_event_handler(hndl);
+	}
+}
+
+static void scmi_put_handler(struct scmi_notify_instance *ni,
+			     struct scmi_event_handler *hndl)
+{
+	struct scmi_registered_event *r_evt = hndl->r_evt;
+
+	mutex_lock(&ni->pending_mtx);
+	if (r_evt)
+		mutex_lock(&r_evt->proto->registered_mtx);
+
+	scmi_put_handler_unlocked(ni, hndl);
+
+	if (r_evt)
+		mutex_unlock(&r_evt->proto->registered_mtx);
+	mutex_unlock(&ni->pending_mtx);
+}
+
+static void scmi_put_active_handler(struct scmi_notify_instance *ni,
+				    struct scmi_event_handler *hndl)
+{
+	struct scmi_registered_event *r_evt = hndl->r_evt;
+
+	mutex_lock(&r_evt->proto->registered_mtx);
+	scmi_put_handler_unlocked(ni, hndl);
+	mutex_unlock(&r_evt->proto->registered_mtx);
+}
+
+/**
+ * scmi_event_handler_enable_events()  - Enable events associated to an handler
+ * @hndl: The Event handler to act upon
+ *
+ * Return: 0 on Success
+ */
+static int scmi_event_handler_enable_events(struct scmi_event_handler *hndl)
+{
+	if (scmi_enable_events(hndl)) {
+		pr_err("Failed to ENABLE events for key:%X !\n", hndl->key);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * scmi_register_notifier()  - Register a notifier_block for an event
+ * @handle: The handle identifying the platform instance against which the
+ *	    callback is registered
+ * @proto_id: Protocol ID
+ * @evt_id: Event ID
+ * @src_id: Source ID, when NULL register for events coming form ALL possible
+ *	    sources
+ * @nb: A standard notifier block to register for the specified event
+ *
+ * Generic helper to register a notifier_block against a protocol event.
+ *
+ * A notifier_block @nb will be registered for each distinct event identified
+ * by the tuple (proto_id, evt_id, src_id) on a dedicated notification chain
+ * so that:
+ *
+ *	(proto_X, evt_Y, src_Z) --> chain_X_Y_Z
+ *
+ * @src_id meaning is protocol specific and identifies the origin of the event
+ * (like domain_id, sensor_id and so forth).
+ *
+ * @src_id can be NULL to signify that the caller is interested in receiving
+ * notifications from ALL the available sources for that protocol OR simply that
+ * the protocol does not support distinct sources.
+ *
+ * As soon as one user for the specified tuple appears, an handler is created,
+ * and that specific event's generation is enabled at the platform level, unless
+ * an associated registered event is found missing, meaning that the needed
+ * protocol is still to be initialized and the handler has just been registered
+ * as still pending.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_register_notifier(const struct scmi_handle *handle,
+				  u8 proto_id, u8 evt_id, u32 *src_id,
+				  struct notifier_block *nb)
+{
+	int ret = 0;
+	u32 evt_key;
+	struct scmi_event_handler *hndl;
+	struct scmi_notify_instance *ni;
+
+	/* Ensure notify_priv is updated */
+	smp_rmb();
+	if (!handle->notify_priv)
+		return -ENODEV;
+	ni = handle->notify_priv;
+
+	evt_key = MAKE_HASH_KEY(proto_id, evt_id,
+				src_id ? *src_id : SRC_ID_MASK);
+	hndl = scmi_get_or_create_handler(ni, evt_key);
+	if (!hndl)
+		return -EINVAL;
+
+	blocking_notifier_chain_register(&hndl->chain, nb);
+
+	/* Enable events for not pending handlers */
+	if (!IS_HNDL_PENDING(hndl)) {
+		ret = scmi_event_handler_enable_events(hndl);
+		if (ret)
+			scmi_put_handler(ni, hndl);
+	}
+
+	return ret;
+}
+
+/**
+ * scmi_unregister_notifier()  - Unregister a notifier_block for an event
+ * @handle: The handle identifying the platform instance against which the
+ *	    callback is unregistered
+ * @proto_id: Protocol ID
+ * @evt_id: Event ID
+ * @src_id: Source ID
+ * @nb: The notifier_block to unregister
+ *
+ * Takes care to unregister the provided @nb from the notification chain
+ * associated to the specified event and, if there are no more users for the
+ * event handler, frees also the associated event handler structures.
+ * (this could possibly cause disabling of event's generation at platform level)
+ *
+ * Return: 0 on Success
+ */
+static int scmi_unregister_notifier(const struct scmi_handle *handle,
+				    u8 proto_id, u8 evt_id, u32 *src_id,
+				    struct notifier_block *nb)
+{
+	u32 evt_key;
+	struct scmi_event_handler *hndl;
+	struct scmi_notify_instance *ni;
+
+	/* Ensure notify_priv is updated */
+	smp_rmb();
+	if (!handle->notify_priv)
+		return -ENODEV;
+	ni = handle->notify_priv;
+
+	evt_key = MAKE_HASH_KEY(proto_id, evt_id,
+				src_id ? *src_id : SRC_ID_MASK);
+	hndl = scmi_get_handler(ni, evt_key);
+	if (!hndl)
+		return -EINVAL;
+
+	/*
+	 * Note that this chain unregistration call is safe on its own
+	 * being internally protected by an rwsem.
+	 */
+	blocking_notifier_chain_unregister(&hndl->chain, nb);
+	scmi_put_handler(ni, hndl);
+
+	/*
+	 * This balances the initial get issued in @scmi_register_notifier.
+	 * If this notifier_block happened to be the last known user callback
+	 * for this event, the handler is here freed and the event's generation
+	 * stopped.
+	 *
+	 * Note that, an ongoing concurrent lookup on the delivery workqueue
+	 * path could still hold the refcount to 1 even after this routine
+	 * completes: in such a case it will be the final put on the delivery
+	 * path which will finally free this unused handler.
+	 */
+	scmi_put_handler(ni, hndl);
+
+	return 0;
+}
+
+/**
+ * scmi_protocols_late_init()  - Worker for late initialization
+ * @work: The work item to use associated to the proper SCMI instance
+ *
+ * This kicks in whenever a new protocol has completed its own registration via
+ * scmi_register_protocol_events(): it is in charge of scanning the table of
+ * pending handlers (registered by users while the related protocol was still
+ * not initialized) and finalizing their initialization whenever possible;
+ * invalid pending handlers are purged at this point in time.
+ */
+static void scmi_protocols_late_init(struct work_struct *work)
+{
+	int bkt;
+	struct scmi_event_handler *hndl;
+	struct scmi_notify_instance *ni;
+	struct hlist_node *tmp;
+
+	ni = container_of(work, struct scmi_notify_instance, init_work);
+
+	/* Ensure protocols and events are up to date */
+	smp_rmb();
+
+	mutex_lock(&ni->pending_mtx);
+	hash_for_each_safe(ni->pending_events_handlers, bkt, tmp, hndl, hash) {
+		int ret;
+
+		ret = scmi_bind_event_handler(ni, hndl);
+		if (!ret) {
+			dev_dbg(ni->handle->dev,
+				"finalized PENDING handler - key:%X\n",
+				hndl->key);
+			ret = scmi_event_handler_enable_events(hndl);
+			if (ret) {
+				dev_dbg(ni->handle->dev,
+					"purging INVALID handler - key:%X\n",
+					hndl->key);
+				scmi_put_active_handler(ni, hndl);
+			}
+		} else {
+			ret = scmi_valid_pending_handler(ni, hndl);
+			if (ret) {
+				dev_dbg(ni->handle->dev,
+					"purging PENDING handler - key:%X\n",
+					hndl->key);
+				/* this hndl can be only a pending one */
+				scmi_put_handler_unlocked(ni, hndl);
+			}
+		}
+	}
+	mutex_unlock(&ni->pending_mtx);
+}
+
+/*
+ * notify_ops are attached to the handle so that can be accessed
+ * directly from an scmi_driver to register its own notifiers.
+ */
+static const struct scmi_notify_ops notify_ops = {
+	.register_event_notifier = scmi_register_notifier,
+	.unregister_event_notifier = scmi_unregister_notifier,
+};
+
+/**
+ * scmi_notification_init()  - Initializes Notification Core Support
+ * @handle: The handle identifying the platform instance to initialize
+ *
+ * This function lays out all the basic resources needed by the notification
+ * core instance identified by the provided handle: once done, all of the
+ * SCMI Protocols can register their events with the core during their own
+ * initializations.
+ *
+ * Note that failing to initialize the core notifications support does not
+ * cause the whole SCMI Protocols stack to fail its initialization.
+ *
+ * SCMI Notification Initialization happens in 2 steps:
+ * * initialization: basic common allocations (this function)
+ * * registration: protocols asynchronously come into life and registers their
+ *		   own supported list of events with the core; this causes
+ *		   further per-protocol allocations
+ *
+ * Any user's callback registration attempt, referring a still not registered
+ * event, will be registered as pending and finalized later (if possible)
+ * by scmi_protocols_late_init() work.
+ * This allows for lazy initialization of SCMI Protocols due to late (or
+ * missing) SCMI drivers' modules loading.
+ *
+ * Return: 0 on Success
+ */
+int scmi_notification_init(struct scmi_handle *handle)
+{
+	void *gid;
+	struct scmi_notify_instance *ni;
+
+	gid = devres_open_group(handle->dev, NULL, GFP_KERNEL);
+	if (!gid)
+		return -ENOMEM;
+
+	ni = devm_kzalloc(handle->dev, sizeof(*ni), GFP_KERNEL);
+	if (!ni)
+		goto err;
+
+	ni->gid = gid;
+	ni->handle = handle;
+
+	ni->registered_protocols = devm_kcalloc(handle->dev, SCMI_MAX_PROTO,
+						sizeof(char *), GFP_KERNEL);
+	if (!ni->registered_protocols)
+		goto err;
+
+	ni->notify_wq = alloc_workqueue(dev_name(handle->dev),
+					WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS,
+					0);
+	if (!ni->notify_wq)
+		goto err;
+
+	mutex_init(&ni->pending_mtx);
+	hash_init(ni->pending_events_handlers);
+
+	INIT_WORK(&ni->init_work, scmi_protocols_late_init);
+
+	handle->notify_ops = &notify_ops;
+	handle->notify_priv = ni;
+	/* Ensure handle is up to date */
+	smp_wmb();
+
+	dev_info(handle->dev, "Core Enabled.\n");
+
+	devres_close_group(handle->dev, ni->gid);
+
+	return 0;
+
+err:
+	dev_warn(handle->dev, "Initialization Failed.\n");
+	devres_release_group(handle->dev, NULL);
+	return -ENOMEM;
+}
+
+/**
+ * scmi_notification_exit()  - Shutdown and clean Notification core
+ * @handle: The handle identifying the platform instance to shutdown
+ */
+void scmi_notification_exit(struct scmi_handle *handle)
+{
+	struct scmi_notify_instance *ni;
+
+	/* Ensure notify_priv is updated */
+	smp_rmb();
+	if (!handle->notify_priv)
+		return;
+	ni = handle->notify_priv;
+
+	handle->notify_priv = NULL;
+	/* Ensure handle is up to date */
+	smp_wmb();
+
+	/* Destroy while letting pending work complete */
+	destroy_workqueue(ni->notify_wq);
+
+	devres_release_group(ni->handle->dev, ni->gid);
+}
diff --git a/drivers/firmware/arm_scmi/notify.h b/drivers/firmware/arm_scmi/notify.h
new file mode 100644
index 000000000..3485f20fa
--- /dev/null
+++ b/drivers/firmware/arm_scmi/notify.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System Control and Management Interface (SCMI) Message Protocol
+ * notification header file containing some definitions, structures
+ * and function prototypes related to SCMI Notification handling.
+ *
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef _SCMI_NOTIFY_H
+#define _SCMI_NOTIFY_H
+
+#include <linux/device.h>
+#include <linux/ktime.h>
+#include <linux/types.h>
+
+#define SCMI_PROTO_QUEUE_SZ	4096
+
+/**
+ * struct scmi_event  - Describes an event to be supported
+ * @id: Event ID
+ * @max_payld_sz: Max possible size for the payload of a notification message
+ * @max_report_sz: Max possible size for the report of a notification message
+ *
+ * Each SCMI protocol, during its initialization phase, can describe the events
+ * it wishes to support in a few struct scmi_event and pass them to the core
+ * using scmi_register_protocol_events().
+ */
+struct scmi_event {
+	u8	id;
+	size_t	max_payld_sz;
+	size_t	max_report_sz;
+};
+
+/**
+ * struct scmi_event_ops  - Protocol helpers called by the notification core.
+ * @set_notify_enabled: Enable/disable the required evt_id/src_id notifications
+ *			using the proper custom protocol commands.
+ *			Return 0 on Success
+ * @fill_custom_report: fills a custom event report from the provided
+ *			event message payld identifying the event
+ *			specific src_id.
+ *			Return NULL on failure otherwise @report now fully
+ *			populated
+ *
+ * Context: Helpers described in &struct scmi_event_ops are called only in
+ *	    process context.
+ */
+struct scmi_event_ops {
+	int (*set_notify_enabled)(const struct scmi_handle *handle,
+				  u8 evt_id, u32 src_id, bool enabled);
+	void *(*fill_custom_report)(const struct scmi_handle *handle,
+				    u8 evt_id, ktime_t timestamp,
+				    const void *payld, size_t payld_sz,
+				    void *report, u32 *src_id);
+};
+
+int scmi_notification_init(struct scmi_handle *handle);
+void scmi_notification_exit(struct scmi_handle *handle);
+
+int scmi_register_protocol_events(const struct scmi_handle *handle,
+				  u8 proto_id, size_t queue_sz,
+				  const struct scmi_event_ops *ops,
+				  const struct scmi_event *evt, int num_events,
+				  int num_sources);
+int scmi_notify(const struct scmi_handle *handle, u8 proto_id, u8 evt_id,
+		const void *buf, size_t len, ktime_t ts);
+
+#endif /* _SCMI_NOTIFY_H */
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
new file mode 100644
index 000000000..82fb3babf
--- /dev/null
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Performance Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications PERF - " fmt
+
+#include <linux/bits.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scmi_protocol.h>
+#include <linux/sort.h>
+
+#include "common.h"
+#include "notify.h"
+
+enum scmi_performance_protocol_cmd {
+	PERF_DOMAIN_ATTRIBUTES = 0x3,
+	PERF_DESCRIBE_LEVELS = 0x4,
+	PERF_LIMITS_SET = 0x5,
+	PERF_LIMITS_GET = 0x6,
+	PERF_LEVEL_SET = 0x7,
+	PERF_LEVEL_GET = 0x8,
+	PERF_NOTIFY_LIMITS = 0x9,
+	PERF_NOTIFY_LEVEL = 0xa,
+	PERF_DESCRIBE_FASTCHANNEL = 0xb,
+};
+
+struct scmi_opp {
+	u32 perf;
+	u32 power;
+	u32 trans_latency_us;
+};
+
+struct scmi_msg_resp_perf_attributes {
+	__le16 num_domains;
+	__le16 flags;
+#define POWER_SCALE_IN_MILLIWATT(x)	((x) & BIT(0))
+	__le32 stats_addr_low;
+	__le32 stats_addr_high;
+	__le32 stats_size;
+};
+
+struct scmi_msg_resp_perf_domain_attributes {
+	__le32 flags;
+#define SUPPORTS_SET_LIMITS(x)		((x) & BIT(31))
+#define SUPPORTS_SET_PERF_LVL(x)	((x) & BIT(30))
+#define SUPPORTS_PERF_LIMIT_NOTIFY(x)	((x) & BIT(29))
+#define SUPPORTS_PERF_LEVEL_NOTIFY(x)	((x) & BIT(28))
+#define SUPPORTS_PERF_FASTCHANNELS(x)	((x) & BIT(27))
+	__le32 rate_limit_us;
+	__le32 sustained_freq_khz;
+	__le32 sustained_perf_level;
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_msg_perf_describe_levels {
+	__le32 domain;
+	__le32 level_index;
+};
+
+struct scmi_perf_set_limits {
+	__le32 domain;
+	__le32 max_level;
+	__le32 min_level;
+};
+
+struct scmi_perf_get_limits {
+	__le32 max_level;
+	__le32 min_level;
+};
+
+struct scmi_perf_set_level {
+	__le32 domain;
+	__le32 level;
+};
+
+struct scmi_perf_notify_level_or_limits {
+	__le32 domain;
+	__le32 notify_enable;
+};
+
+struct scmi_perf_limits_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 range_max;
+	__le32 range_min;
+};
+
+struct scmi_perf_level_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 performance_level;
+};
+
+struct scmi_msg_resp_perf_describe_levels {
+	__le16 num_returned;
+	__le16 num_remaining;
+	struct {
+		__le32 perf_val;
+		__le32 power;
+		__le16 transition_latency_us;
+		__le16 reserved;
+	} opp[];
+};
+
+struct scmi_perf_get_fc_info {
+	__le32 domain;
+	__le32 message_id;
+};
+
+struct scmi_msg_resp_perf_desc_fc {
+	__le32 attr;
+#define SUPPORTS_DOORBELL(x)		((x) & BIT(0))
+#define DOORBELL_REG_WIDTH(x)		FIELD_GET(GENMASK(2, 1), (x))
+	__le32 rate_limit;
+	__le32 chan_addr_low;
+	__le32 chan_addr_high;
+	__le32 chan_size;
+	__le32 db_addr_low;
+	__le32 db_addr_high;
+	__le32 db_set_lmask;
+	__le32 db_set_hmask;
+	__le32 db_preserve_lmask;
+	__le32 db_preserve_hmask;
+};
+
+struct scmi_fc_db_info {
+	int width;
+	u64 set;
+	u64 mask;
+	void __iomem *addr;
+};
+
+struct scmi_fc_info {
+	void __iomem *level_set_addr;
+	void __iomem *limit_set_addr;
+	void __iomem *level_get_addr;
+	void __iomem *limit_get_addr;
+	struct scmi_fc_db_info *level_set_db;
+	struct scmi_fc_db_info *limit_set_db;
+};
+
+struct perf_dom_info {
+	bool set_limits;
+	bool set_perf;
+	bool perf_limit_notify;
+	bool perf_level_notify;
+	bool perf_fastchannels;
+	u32 opp_count;
+	u32 sustained_freq_khz;
+	u32 sustained_perf_level;
+	u32 mult_factor;
+	char name[SCMI_MAX_STR_SIZE];
+	struct scmi_opp opp[MAX_OPPS];
+	struct scmi_fc_info *fc_info;
+};
+
+struct scmi_perf_info {
+	u32 version;
+	int num_domains;
+	bool power_scale_mw;
+	u64 stats_addr;
+	u32 stats_size;
+	struct perf_dom_info *dom_info;
+};
+
+static enum scmi_performance_protocol_cmd evt_2_cmd[] = {
+	PERF_NOTIFY_LIMITS,
+	PERF_NOTIFY_LEVEL,
+};
+
+static int scmi_perf_attributes_get(const struct scmi_handle *handle,
+				    struct scmi_perf_info *pi)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_perf_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_PERF, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u16 flags = le16_to_cpu(attr->flags);
+
+		pi->num_domains = le16_to_cpu(attr->num_domains);
+		pi->power_scale_mw = POWER_SCALE_IN_MILLIWATT(flags);
+		pi->stats_addr = le32_to_cpu(attr->stats_addr_low) |
+				(u64)le32_to_cpu(attr->stats_addr_high) << 32;
+		pi->stats_size = le32_to_cpu(attr->stats_size);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+				struct perf_dom_info *dom_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_perf_domain_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, PERF_DOMAIN_ATTRIBUTES,
+				 SCMI_PROTOCOL_PERF, sizeof(domain),
+				 sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(domain, t->tx.buf);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u32 flags = le32_to_cpu(attr->flags);
+
+		dom_info->set_limits = SUPPORTS_SET_LIMITS(flags);
+		dom_info->set_perf = SUPPORTS_SET_PERF_LVL(flags);
+		dom_info->perf_limit_notify = SUPPORTS_PERF_LIMIT_NOTIFY(flags);
+		dom_info->perf_level_notify = SUPPORTS_PERF_LEVEL_NOTIFY(flags);
+		dom_info->perf_fastchannels = SUPPORTS_PERF_FASTCHANNELS(flags);
+		dom_info->sustained_freq_khz =
+					le32_to_cpu(attr->sustained_freq_khz);
+		dom_info->sustained_perf_level =
+					le32_to_cpu(attr->sustained_perf_level);
+		if (!dom_info->sustained_freq_khz ||
+		    !dom_info->sustained_perf_level)
+			/* CPUFreq converts to kHz, hence default 1000 */
+			dom_info->mult_factor =	1000;
+		else
+			dom_info->mult_factor =
+					(dom_info->sustained_freq_khz * 1000) /
+					dom_info->sustained_perf_level;
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int opp_cmp_func(const void *opp1, const void *opp2)
+{
+	const struct scmi_opp *t1 = opp1, *t2 = opp2;
+
+	return t1->perf - t2->perf;
+}
+
+static int
+scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain,
+			      struct perf_dom_info *perf_dom)
+{
+	int ret, cnt;
+	u32 tot_opp_cnt = 0;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_opp *opp;
+	struct scmi_msg_perf_describe_levels *dom_info;
+	struct scmi_msg_resp_perf_describe_levels *level_info;
+
+	ret = scmi_xfer_get_init(handle, PERF_DESCRIBE_LEVELS,
+				 SCMI_PROTOCOL_PERF, sizeof(*dom_info), 0, &t);
+	if (ret)
+		return ret;
+
+	dom_info = t->tx.buf;
+	level_info = t->rx.buf;
+
+	do {
+		dom_info->domain = cpu_to_le32(domain);
+		/* Set the number of OPPs to be skipped/already read */
+		dom_info->level_index = cpu_to_le32(tot_opp_cnt);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		num_returned = le16_to_cpu(level_info->num_returned);
+		num_remaining = le16_to_cpu(level_info->num_remaining);
+		if (tot_opp_cnt + num_returned > MAX_OPPS) {
+			dev_err(handle->dev, "No. of OPPs exceeded MAX_OPPS");
+			break;
+		}
+
+		opp = &perf_dom->opp[tot_opp_cnt];
+		for (cnt = 0; cnt < num_returned; cnt++, opp++) {
+			opp->perf = le32_to_cpu(level_info->opp[cnt].perf_val);
+			opp->power = le32_to_cpu(level_info->opp[cnt].power);
+			opp->trans_latency_us = le16_to_cpu
+				(level_info->opp[cnt].transition_latency_us);
+
+			dev_dbg(handle->dev, "Level %d Power %d Latency %dus\n",
+				opp->perf, opp->power, opp->trans_latency_us);
+		}
+
+		tot_opp_cnt += num_returned;
+
+		scmi_reset_rx_to_maxsz(handle, t);
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	perf_dom->opp_count = tot_opp_cnt;
+	scmi_xfer_put(handle, t);
+
+	sort(perf_dom->opp, tot_opp_cnt, sizeof(*opp), opp_cmp_func, NULL);
+	return ret;
+}
+
+#define SCMI_PERF_FC_RING_DB(w)				\
+do {							\
+	u##w val = 0;					\
+							\
+	if (db->mask)					\
+		val = ioread##w(db->addr) & db->mask;	\
+	iowrite##w((u##w)db->set | val, db->addr);	\
+} while (0)
+
+static void scmi_perf_fc_ring_db(struct scmi_fc_db_info *db)
+{
+	if (!db || !db->addr)
+		return;
+
+	if (db->width == 1)
+		SCMI_PERF_FC_RING_DB(8);
+	else if (db->width == 2)
+		SCMI_PERF_FC_RING_DB(16);
+	else if (db->width == 4)
+		SCMI_PERF_FC_RING_DB(32);
+	else /* db->width == 8 */
+#ifdef CONFIG_64BIT
+		SCMI_PERF_FC_RING_DB(64);
+#else
+	{
+		u64 val = 0;
+
+		if (db->mask)
+			val = ioread64_hi_lo(db->addr) & db->mask;
+		iowrite64_hi_lo(db->set | val, db->addr);
+	}
+#endif
+}
+
+static int scmi_perf_mb_limits_set(const struct scmi_handle *handle, u32 domain,
+				   u32 max_perf, u32 min_perf)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_set_limits *limits;
+
+	ret = scmi_xfer_get_init(handle, PERF_LIMITS_SET, SCMI_PROTOCOL_PERF,
+				 sizeof(*limits), 0, &t);
+	if (ret)
+		return ret;
+
+	limits = t->tx.buf;
+	limits->domain = cpu_to_le32(domain);
+	limits->max_level = cpu_to_le32(max_perf);
+	limits->min_level = cpu_to_le32(min_perf);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_limits_set(const struct scmi_handle *handle, u32 domain,
+				u32 max_perf, u32 min_perf)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	if (dom->fc_info && dom->fc_info->limit_set_addr) {
+		iowrite32(max_perf, dom->fc_info->limit_set_addr);
+		iowrite32(min_perf, dom->fc_info->limit_set_addr + 4);
+		scmi_perf_fc_ring_db(dom->fc_info->limit_set_db);
+		return 0;
+	}
+
+	return scmi_perf_mb_limits_set(handle, domain, max_perf, min_perf);
+}
+
+static int scmi_perf_mb_limits_get(const struct scmi_handle *handle, u32 domain,
+				   u32 *max_perf, u32 *min_perf)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_get_limits *limits;
+
+	ret = scmi_xfer_get_init(handle, PERF_LIMITS_GET, SCMI_PROTOCOL_PERF,
+				 sizeof(__le32), 0, &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(domain, t->tx.buf);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		limits = t->rx.buf;
+
+		*max_perf = le32_to_cpu(limits->max_level);
+		*min_perf = le32_to_cpu(limits->min_level);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_limits_get(const struct scmi_handle *handle, u32 domain,
+				u32 *max_perf, u32 *min_perf)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	if (dom->fc_info && dom->fc_info->limit_get_addr) {
+		*max_perf = ioread32(dom->fc_info->limit_get_addr);
+		*min_perf = ioread32(dom->fc_info->limit_get_addr + 4);
+		return 0;
+	}
+
+	return scmi_perf_mb_limits_get(handle, domain, max_perf, min_perf);
+}
+
+static int scmi_perf_mb_level_set(const struct scmi_handle *handle, u32 domain,
+				  u32 level, bool poll)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_set_level *lvl;
+
+	ret = scmi_xfer_get_init(handle, PERF_LEVEL_SET, SCMI_PROTOCOL_PERF,
+				 sizeof(*lvl), 0, &t);
+	if (ret)
+		return ret;
+
+	t->hdr.poll_completion = poll;
+	lvl = t->tx.buf;
+	lvl->domain = cpu_to_le32(domain);
+	lvl->level = cpu_to_le32(level);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_level_set(const struct scmi_handle *handle, u32 domain,
+			       u32 level, bool poll)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	if (dom->fc_info && dom->fc_info->level_set_addr) {
+		iowrite32(level, dom->fc_info->level_set_addr);
+		scmi_perf_fc_ring_db(dom->fc_info->level_set_db);
+		return 0;
+	}
+
+	return scmi_perf_mb_level_set(handle, domain, level, poll);
+}
+
+static int scmi_perf_mb_level_get(const struct scmi_handle *handle, u32 domain,
+				  u32 *level, bool poll)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, PERF_LEVEL_GET, SCMI_PROTOCOL_PERF,
+				 sizeof(u32), sizeof(u32), &t);
+	if (ret)
+		return ret;
+
+	t->hdr.poll_completion = poll;
+	put_unaligned_le32(domain, t->tx.buf);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		*level = get_unaligned_le32(t->rx.buf);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_perf_level_get(const struct scmi_handle *handle, u32 domain,
+			       u32 *level, bool poll)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	if (dom->fc_info && dom->fc_info->level_get_addr) {
+		*level = ioread32(dom->fc_info->level_get_addr);
+		return 0;
+	}
+
+	return scmi_perf_mb_level_get(handle, domain, level, poll);
+}
+
+static int scmi_perf_level_limits_notify(const struct scmi_handle *handle,
+					 u32 domain, int message_id,
+					 bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_perf_notify_level_or_limits *notify;
+
+	ret = scmi_xfer_get_init(handle, message_id, SCMI_PROTOCOL_PERF,
+				 sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->domain = cpu_to_le32(domain);
+	notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static bool scmi_perf_fc_size_is_valid(u32 msg, u32 size)
+{
+	if ((msg == PERF_LEVEL_GET || msg == PERF_LEVEL_SET) && size == 4)
+		return true;
+	if ((msg == PERF_LIMITS_GET || msg == PERF_LIMITS_SET) && size == 8)
+		return true;
+	return false;
+}
+
+static void
+scmi_perf_domain_desc_fc(const struct scmi_handle *handle, u32 domain,
+			 u32 message_id, void __iomem **p_addr,
+			 struct scmi_fc_db_info **p_db)
+{
+	int ret;
+	u32 flags;
+	u64 phys_addr;
+	u8 size;
+	void __iomem *addr;
+	struct scmi_xfer *t;
+	struct scmi_fc_db_info *db;
+	struct scmi_perf_get_fc_info *info;
+	struct scmi_msg_resp_perf_desc_fc *resp;
+
+	if (!p_addr)
+		return;
+
+	ret = scmi_xfer_get_init(handle, PERF_DESCRIBE_FASTCHANNEL,
+				 SCMI_PROTOCOL_PERF,
+				 sizeof(*info), sizeof(*resp), &t);
+	if (ret)
+		return;
+
+	info = t->tx.buf;
+	info->domain = cpu_to_le32(domain);
+	info->message_id = cpu_to_le32(message_id);
+
+	ret = scmi_do_xfer(handle, t);
+	if (ret)
+		goto err_xfer;
+
+	resp = t->rx.buf;
+	flags = le32_to_cpu(resp->attr);
+	size = le32_to_cpu(resp->chan_size);
+	if (!scmi_perf_fc_size_is_valid(message_id, size))
+		goto err_xfer;
+
+	phys_addr = le32_to_cpu(resp->chan_addr_low);
+	phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
+	addr = devm_ioremap(handle->dev, phys_addr, size);
+	if (!addr)
+		goto err_xfer;
+	*p_addr = addr;
+
+	if (p_db && SUPPORTS_DOORBELL(flags)) {
+		db = devm_kzalloc(handle->dev, sizeof(*db), GFP_KERNEL);
+		if (!db)
+			goto err_xfer;
+
+		size = 1 << DOORBELL_REG_WIDTH(flags);
+		phys_addr = le32_to_cpu(resp->db_addr_low);
+		phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
+		addr = devm_ioremap(handle->dev, phys_addr, size);
+		if (!addr)
+			goto err_xfer;
+
+		db->addr = addr;
+		db->width = size;
+		db->set = le32_to_cpu(resp->db_set_lmask);
+		db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
+		db->mask = le32_to_cpu(resp->db_preserve_lmask);
+		db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
+		*p_db = db;
+	}
+err_xfer:
+	scmi_xfer_put(handle, t);
+}
+
+static void scmi_perf_domain_init_fc(const struct scmi_handle *handle,
+				     u32 domain, struct scmi_fc_info **p_fc)
+{
+	struct scmi_fc_info *fc;
+
+	fc = devm_kzalloc(handle->dev, sizeof(*fc), GFP_KERNEL);
+	if (!fc)
+		return;
+
+	scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_SET,
+				 &fc->level_set_addr, &fc->level_set_db);
+	scmi_perf_domain_desc_fc(handle, domain, PERF_LEVEL_GET,
+				 &fc->level_get_addr, NULL);
+	scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_SET,
+				 &fc->limit_set_addr, &fc->limit_set_db);
+	scmi_perf_domain_desc_fc(handle, domain, PERF_LIMITS_GET,
+				 &fc->limit_get_addr, NULL);
+	*p_fc = fc;
+}
+
+/* Device specific ops */
+static int scmi_dev_domain_id(struct device *dev)
+{
+	struct of_phandle_args clkspec;
+
+	if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells",
+				       0, &clkspec))
+		return -EINVAL;
+
+	return clkspec.args[0];
+}
+
+static int scmi_dvfs_device_opps_add(const struct scmi_handle *handle,
+				     struct device *dev)
+{
+	int idx, ret, domain;
+	unsigned long freq;
+	struct scmi_opp *opp;
+	struct perf_dom_info *dom;
+	struct scmi_perf_info *pi = handle->perf_priv;
+
+	domain = scmi_dev_domain_id(dev);
+	if (domain < 0)
+		return domain;
+
+	dom = pi->dom_info + domain;
+
+	for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
+		freq = opp->perf * dom->mult_factor;
+
+		ret = dev_pm_opp_add(dev, freq, 0);
+		if (ret) {
+			dev_warn(dev, "failed to add opp %luHz\n", freq);
+
+			while (idx-- > 0) {
+				freq = (--opp)->perf * dom->mult_factor;
+				dev_pm_opp_remove(dev, freq);
+			}
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int scmi_dvfs_transition_latency_get(const struct scmi_handle *handle,
+					    struct device *dev)
+{
+	struct perf_dom_info *dom;
+	struct scmi_perf_info *pi = handle->perf_priv;
+	int domain = scmi_dev_domain_id(dev);
+
+	if (domain < 0)
+		return domain;
+
+	dom = pi->dom_info + domain;
+	/* uS to nS */
+	return dom->opp[dom->opp_count - 1].trans_latency_us * 1000;
+}
+
+static int scmi_dvfs_freq_set(const struct scmi_handle *handle, u32 domain,
+			      unsigned long freq, bool poll)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	return scmi_perf_level_set(handle, domain, freq / dom->mult_factor,
+				   poll);
+}
+
+static int scmi_dvfs_freq_get(const struct scmi_handle *handle, u32 domain,
+			      unsigned long *freq, bool poll)
+{
+	int ret;
+	u32 level;
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom = pi->dom_info + domain;
+
+	ret = scmi_perf_level_get(handle, domain, &level, poll);
+	if (!ret)
+		*freq = level * dom->mult_factor;
+
+	return ret;
+}
+
+static int scmi_dvfs_est_power_get(const struct scmi_handle *handle, u32 domain,
+				   unsigned long *freq, unsigned long *power)
+{
+	struct scmi_perf_info *pi = handle->perf_priv;
+	struct perf_dom_info *dom;
+	unsigned long opp_freq;
+	int idx, ret = -EINVAL;
+	struct scmi_opp *opp;
+
+	dom = pi->dom_info + domain;
+	if (!dom)
+		return -EIO;
+
+	for (opp = dom->opp, idx = 0; idx < dom->opp_count; idx++, opp++) {
+		opp_freq = opp->perf * dom->mult_factor;
+		if (opp_freq < *freq)
+			continue;
+
+		*freq = opp_freq;
+		*power = opp->power;
+		ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
+static bool scmi_fast_switch_possible(const struct scmi_handle *handle,
+				      struct device *dev)
+{
+	struct perf_dom_info *dom;
+	struct scmi_perf_info *pi = handle->perf_priv;
+
+	dom = pi->dom_info + scmi_dev_domain_id(dev);
+
+	return dom->fc_info && dom->fc_info->level_set_addr;
+}
+
+static const struct scmi_perf_ops perf_ops = {
+	.limits_set = scmi_perf_limits_set,
+	.limits_get = scmi_perf_limits_get,
+	.level_set = scmi_perf_level_set,
+	.level_get = scmi_perf_level_get,
+	.device_domain_id = scmi_dev_domain_id,
+	.transition_latency_get = scmi_dvfs_transition_latency_get,
+	.device_opps_add = scmi_dvfs_device_opps_add,
+	.freq_set = scmi_dvfs_freq_set,
+	.freq_get = scmi_dvfs_freq_get,
+	.est_power_get = scmi_dvfs_est_power_get,
+	.fast_switch_possible = scmi_fast_switch_possible,
+};
+
+static int scmi_perf_set_notify_enabled(const struct scmi_handle *handle,
+					u8 evt_id, u32 src_id, bool enable)
+{
+	int ret, cmd_id;
+
+	if (evt_id >= ARRAY_SIZE(evt_2_cmd))
+		return -EINVAL;
+
+	cmd_id = evt_2_cmd[evt_id];
+	ret = scmi_perf_level_limits_notify(handle, src_id, cmd_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_perf_fill_custom_report(const struct scmi_handle *handle,
+					  u8 evt_id, ktime_t timestamp,
+					  const void *payld, size_t payld_sz,
+					  void *report, u32 *src_id)
+{
+	void *rep = NULL;
+
+	switch (evt_id) {
+	case SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED:
+	{
+		const struct scmi_perf_limits_notify_payld *p = payld;
+		struct scmi_perf_limits_report *r = report;
+
+		if (sizeof(*p) != payld_sz)
+			break;
+
+		r->timestamp = timestamp;
+		r->agent_id = le32_to_cpu(p->agent_id);
+		r->domain_id = le32_to_cpu(p->domain_id);
+		r->range_max = le32_to_cpu(p->range_max);
+		r->range_min = le32_to_cpu(p->range_min);
+		*src_id = r->domain_id;
+		rep = r;
+		break;
+	}
+	case SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED:
+	{
+		const struct scmi_perf_level_notify_payld *p = payld;
+		struct scmi_perf_level_report *r = report;
+
+		if (sizeof(*p) != payld_sz)
+			break;
+
+		r->timestamp = timestamp;
+		r->agent_id = le32_to_cpu(p->agent_id);
+		r->domain_id = le32_to_cpu(p->domain_id);
+		r->performance_level = le32_to_cpu(p->performance_level);
+		*src_id = r->domain_id;
+		rep = r;
+		break;
+	}
+	default:
+		break;
+	}
+
+	return rep;
+}
+
+static const struct scmi_event perf_events[] = {
+	{
+		.id = SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_perf_limits_notify_payld),
+		.max_report_sz = sizeof(struct scmi_perf_limits_report),
+	},
+	{
+		.id = SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_perf_level_notify_payld),
+		.max_report_sz = sizeof(struct scmi_perf_level_report),
+	},
+};
+
+static const struct scmi_event_ops perf_event_ops = {
+	.set_notify_enabled = scmi_perf_set_notify_enabled,
+	.fill_custom_report = scmi_perf_fill_custom_report,
+};
+
+static int scmi_perf_protocol_init(struct scmi_handle *handle)
+{
+	int domain;
+	u32 version;
+	struct scmi_perf_info *pinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_PERF, &version);
+
+	dev_dbg(handle->dev, "Performance Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	scmi_perf_attributes_get(handle, pinfo);
+
+	pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
+				       sizeof(*pinfo->dom_info), GFP_KERNEL);
+	if (!pinfo->dom_info)
+		return -ENOMEM;
+
+	for (domain = 0; domain < pinfo->num_domains; domain++) {
+		struct perf_dom_info *dom = pinfo->dom_info + domain;
+
+		scmi_perf_domain_attributes_get(handle, domain, dom);
+		scmi_perf_describe_levels_get(handle, domain, dom);
+
+		if (dom->perf_fastchannels)
+			scmi_perf_domain_init_fc(handle, domain, &dom->fc_info);
+	}
+
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_PERF, SCMI_PROTO_QUEUE_SZ,
+				      &perf_event_ops, perf_events,
+				      ARRAY_SIZE(perf_events),
+				      pinfo->num_domains);
+
+	pinfo->version = version;
+	handle->perf_ops = &perf_ops;
+	handle->perf_priv = pinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_PERF, perf)
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
new file mode 100644
index 000000000..1f37258e9
--- /dev/null
+++ b/drivers/firmware/arm_scmi/power.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Power Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications POWER - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+enum scmi_power_protocol_cmd {
+	POWER_DOMAIN_ATTRIBUTES = 0x3,
+	POWER_STATE_SET = 0x4,
+	POWER_STATE_GET = 0x5,
+	POWER_STATE_NOTIFY = 0x6,
+};
+
+struct scmi_msg_resp_power_attributes {
+	__le16 num_domains;
+	__le16 reserved;
+	__le32 stats_addr_low;
+	__le32 stats_addr_high;
+	__le32 stats_size;
+};
+
+struct scmi_msg_resp_power_domain_attributes {
+	__le32 flags;
+#define SUPPORTS_STATE_SET_NOTIFY(x)	((x) & BIT(31))
+#define SUPPORTS_STATE_SET_ASYNC(x)	((x) & BIT(30))
+#define SUPPORTS_STATE_SET_SYNC(x)	((x) & BIT(29))
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_power_set_state {
+	__le32 flags;
+#define STATE_SET_ASYNC		BIT(0)
+	__le32 domain;
+	__le32 state;
+};
+
+struct scmi_power_state_notify {
+	__le32 domain;
+	__le32 notify_enable;
+};
+
+struct scmi_power_state_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 power_state;
+};
+
+struct power_dom_info {
+	bool state_set_sync;
+	bool state_set_async;
+	bool state_set_notify;
+	char name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_power_info {
+	u32 version;
+	int num_domains;
+	u64 stats_addr;
+	u32 stats_size;
+	struct power_dom_info *dom_info;
+};
+
+static int scmi_power_attributes_get(const struct scmi_handle *handle,
+				     struct scmi_power_info *pi)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_power_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_POWER, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		pi->num_domains = le16_to_cpu(attr->num_domains);
+		pi->stats_addr = le32_to_cpu(attr->stats_addr_low) |
+				(u64)le32_to_cpu(attr->stats_addr_high) << 32;
+		pi->stats_size = le32_to_cpu(attr->stats_size);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+				 struct power_dom_info *dom_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_power_domain_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, POWER_DOMAIN_ATTRIBUTES,
+				 SCMI_PROTOCOL_POWER, sizeof(domain),
+				 sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(domain, t->tx.buf);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u32 flags = le32_to_cpu(attr->flags);
+
+		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
+		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
+		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_state_set(const struct scmi_handle *handle, u32 domain, u32 state)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_power_set_state *st;
+
+	ret = scmi_xfer_get_init(handle, POWER_STATE_SET, SCMI_PROTOCOL_POWER,
+				 sizeof(*st), 0, &t);
+	if (ret)
+		return ret;
+
+	st = t->tx.buf;
+	st->flags = cpu_to_le32(0);
+	st->domain = cpu_to_le32(domain);
+	st->state = cpu_to_le32(state);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_power_state_get(const struct scmi_handle *handle, u32 domain, u32 *state)
+{
+	int ret;
+	struct scmi_xfer *t;
+
+	ret = scmi_xfer_get_init(handle, POWER_STATE_GET, SCMI_PROTOCOL_POWER,
+				 sizeof(u32), sizeof(u32), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(domain, t->tx.buf);
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret)
+		*state = get_unaligned_le32(t->rx.buf);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_power_num_domains_get(const struct scmi_handle *handle)
+{
+	struct scmi_power_info *pi = handle->power_priv;
+
+	return pi->num_domains;
+}
+
+static char *scmi_power_name_get(const struct scmi_handle *handle, u32 domain)
+{
+	struct scmi_power_info *pi = handle->power_priv;
+	struct power_dom_info *dom = pi->dom_info + domain;
+
+	return dom->name;
+}
+
+static const struct scmi_power_ops power_ops = {
+	.num_domains_get = scmi_power_num_domains_get,
+	.name_get = scmi_power_name_get,
+	.state_set = scmi_power_state_set,
+	.state_get = scmi_power_state_get,
+};
+
+static int scmi_power_request_notify(const struct scmi_handle *handle,
+				     u32 domain, bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_power_state_notify *notify;
+
+	ret = scmi_xfer_get_init(handle, POWER_STATE_NOTIFY,
+				 SCMI_PROTOCOL_POWER, sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->domain = cpu_to_le32(domain);
+	notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_power_set_notify_enabled(const struct scmi_handle *handle,
+					 u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_power_request_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLE - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_power_fill_custom_report(const struct scmi_handle *handle,
+					   u8 evt_id, ktime_t timestamp,
+					   const void *payld, size_t payld_sz,
+					   void *report, u32 *src_id)
+{
+	const struct scmi_power_state_notify_payld *p = payld;
+	struct scmi_power_state_changed_report *r = report;
+
+	if (evt_id != SCMI_EVENT_POWER_STATE_CHANGED || sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->domain_id = le32_to_cpu(p->domain_id);
+	r->power_state = le32_to_cpu(p->power_state);
+	*src_id = r->domain_id;
+
+	return r;
+}
+
+static const struct scmi_event power_events[] = {
+	{
+		.id = SCMI_EVENT_POWER_STATE_CHANGED,
+		.max_payld_sz = sizeof(struct scmi_power_state_notify_payld),
+		.max_report_sz =
+			sizeof(struct scmi_power_state_changed_report),
+	},
+};
+
+static const struct scmi_event_ops power_event_ops = {
+	.set_notify_enabled = scmi_power_set_notify_enabled,
+	.fill_custom_report = scmi_power_fill_custom_report,
+};
+
+static int scmi_power_protocol_init(struct scmi_handle *handle)
+{
+	int domain;
+	u32 version;
+	struct scmi_power_info *pinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_POWER, &version);
+
+	dev_dbg(handle->dev, "Power Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	scmi_power_attributes_get(handle, pinfo);
+
+	pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
+				       sizeof(*pinfo->dom_info), GFP_KERNEL);
+	if (!pinfo->dom_info)
+		return -ENOMEM;
+
+	for (domain = 0; domain < pinfo->num_domains; domain++) {
+		struct power_dom_info *dom = pinfo->dom_info + domain;
+
+		scmi_power_domain_attributes_get(handle, domain, dom);
+	}
+
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_POWER, SCMI_PROTO_QUEUE_SZ,
+				      &power_event_ops, power_events,
+				      ARRAY_SIZE(power_events),
+				      pinfo->num_domains);
+
+	pinfo->version = version;
+	handle->power_ops = &power_ops;
+	handle->power_priv = pinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_POWER, power)
diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c
new file mode 100644
index 000000000..a981a22cf
--- /dev/null
+++ b/drivers/firmware/arm_scmi/reset.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Reset Protocol
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications RESET - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+enum scmi_reset_protocol_cmd {
+	RESET_DOMAIN_ATTRIBUTES = 0x3,
+	RESET = 0x4,
+	RESET_NOTIFY = 0x5,
+};
+
+#define NUM_RESET_DOMAIN_MASK	0xffff
+#define RESET_NOTIFY_ENABLE	BIT(0)
+
+struct scmi_msg_resp_reset_domain_attributes {
+	__le32 attributes;
+#define SUPPORTS_ASYNC_RESET(x)		((x) & BIT(31))
+#define SUPPORTS_NOTIFY_RESET(x)	((x) & BIT(30))
+	__le32 latency;
+	    u8 name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_msg_reset_domain_reset {
+	__le32 domain_id;
+	__le32 flags;
+#define AUTONOMOUS_RESET	BIT(0)
+#define EXPLICIT_RESET_ASSERT	BIT(1)
+#define ASYNCHRONOUS_RESET	BIT(2)
+	__le32 reset_state;
+#define ARCH_COLD_RESET		0
+};
+
+struct scmi_msg_reset_notify {
+	__le32 id;
+	__le32 event_control;
+#define RESET_TP_NOTIFY_ALL	BIT(0)
+};
+
+struct scmi_reset_issued_notify_payld {
+	__le32 agent_id;
+	__le32 domain_id;
+	__le32 reset_state;
+};
+
+struct reset_dom_info {
+	bool async_reset;
+	bool reset_notify;
+	u32 latency_us;
+	char name[SCMI_MAX_STR_SIZE];
+};
+
+struct scmi_reset_info {
+	u32 version;
+	int num_domains;
+	struct reset_dom_info *dom_info;
+};
+
+static int scmi_reset_attributes_get(const struct scmi_handle *handle,
+				     struct scmi_reset_info *pi)
+{
+	int ret;
+	struct scmi_xfer *t;
+	u32 attr;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_RESET, 0, sizeof(attr), &t);
+	if (ret)
+		return ret;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		attr = get_unaligned_le32(t->rx.buf);
+		pi->num_domains = attr & NUM_RESET_DOMAIN_MASK;
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_reset_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
+				 struct reset_dom_info *dom_info)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_reset_domain_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, RESET_DOMAIN_ATTRIBUTES,
+				 SCMI_PROTOCOL_RESET, sizeof(domain),
+				 sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	put_unaligned_le32(domain, t->tx.buf);
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		u32 attributes = le32_to_cpu(attr->attributes);
+
+		dom_info->async_reset = SUPPORTS_ASYNC_RESET(attributes);
+		dom_info->reset_notify = SUPPORTS_NOTIFY_RESET(attributes);
+		dom_info->latency_us = le32_to_cpu(attr->latency);
+		if (dom_info->latency_us == U32_MAX)
+			dom_info->latency_us = 0;
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_reset_num_domains_get(const struct scmi_handle *handle)
+{
+	struct scmi_reset_info *pi = handle->reset_priv;
+
+	return pi->num_domains;
+}
+
+static char *scmi_reset_name_get(const struct scmi_handle *handle, u32 domain)
+{
+	struct scmi_reset_info *pi = handle->reset_priv;
+	struct reset_dom_info *dom = pi->dom_info + domain;
+
+	return dom->name;
+}
+
+static int scmi_reset_latency_get(const struct scmi_handle *handle, u32 domain)
+{
+	struct scmi_reset_info *pi = handle->reset_priv;
+	struct reset_dom_info *dom = pi->dom_info + domain;
+
+	return dom->latency_us;
+}
+
+static int scmi_domain_reset(const struct scmi_handle *handle, u32 domain,
+			     u32 flags, u32 state)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_reset_domain_reset *dom;
+	struct scmi_reset_info *pi = handle->reset_priv;
+	struct reset_dom_info *rdom = pi->dom_info + domain;
+
+	if (rdom->async_reset)
+		flags |= ASYNCHRONOUS_RESET;
+
+	ret = scmi_xfer_get_init(handle, RESET, SCMI_PROTOCOL_RESET,
+				 sizeof(*dom), 0, &t);
+	if (ret)
+		return ret;
+
+	dom = t->tx.buf;
+	dom->domain_id = cpu_to_le32(domain);
+	dom->flags = cpu_to_le32(flags);
+	dom->reset_state = cpu_to_le32(state);
+
+	if (rdom->async_reset)
+		ret = scmi_do_xfer_with_response(handle, t);
+	else
+		ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_reset_domain_reset(const struct scmi_handle *handle, u32 domain)
+{
+	return scmi_domain_reset(handle, domain, AUTONOMOUS_RESET,
+				 ARCH_COLD_RESET);
+}
+
+static int
+scmi_reset_domain_assert(const struct scmi_handle *handle, u32 domain)
+{
+	return scmi_domain_reset(handle, domain, EXPLICIT_RESET_ASSERT,
+				 ARCH_COLD_RESET);
+}
+
+static int
+scmi_reset_domain_deassert(const struct scmi_handle *handle, u32 domain)
+{
+	return scmi_domain_reset(handle, domain, 0, ARCH_COLD_RESET);
+}
+
+static const struct scmi_reset_ops reset_ops = {
+	.num_domains_get = scmi_reset_num_domains_get,
+	.name_get = scmi_reset_name_get,
+	.latency_get = scmi_reset_latency_get,
+	.reset = scmi_reset_domain_reset,
+	.assert = scmi_reset_domain_assert,
+	.deassert = scmi_reset_domain_deassert,
+};
+
+static int scmi_reset_notify(const struct scmi_handle *handle, u32 domain_id,
+			     bool enable)
+{
+	int ret;
+	u32 evt_cntl = enable ? RESET_TP_NOTIFY_ALL : 0;
+	struct scmi_xfer *t;
+	struct scmi_msg_reset_notify *cfg;
+
+	ret = scmi_xfer_get_init(handle, RESET_NOTIFY,
+				 SCMI_PROTOCOL_RESET, sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->id = cpu_to_le32(domain_id);
+	cfg->event_control = cpu_to_le32(evt_cntl);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_reset_set_notify_enabled(const struct scmi_handle *handle,
+					 u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_reset_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_reset_fill_custom_report(const struct scmi_handle *handle,
+					   u8 evt_id, ktime_t timestamp,
+					   const void *payld, size_t payld_sz,
+					   void *report, u32 *src_id)
+{
+	const struct scmi_reset_issued_notify_payld *p = payld;
+	struct scmi_reset_issued_report *r = report;
+
+	if (evt_id != SCMI_EVENT_RESET_ISSUED || sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->domain_id = le32_to_cpu(p->domain_id);
+	r->reset_state = le32_to_cpu(p->reset_state);
+	*src_id = r->domain_id;
+
+	return r;
+}
+
+static const struct scmi_event reset_events[] = {
+	{
+		.id = SCMI_EVENT_RESET_ISSUED,
+		.max_payld_sz = sizeof(struct scmi_reset_issued_notify_payld),
+		.max_report_sz = sizeof(struct scmi_reset_issued_report),
+	},
+};
+
+static const struct scmi_event_ops reset_event_ops = {
+	.set_notify_enabled = scmi_reset_set_notify_enabled,
+	.fill_custom_report = scmi_reset_fill_custom_report,
+};
+
+static int scmi_reset_protocol_init(struct scmi_handle *handle)
+{
+	int domain;
+	u32 version;
+	struct scmi_reset_info *pinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_RESET, &version);
+
+	dev_dbg(handle->dev, "Reset Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	scmi_reset_attributes_get(handle, pinfo);
+
+	pinfo->dom_info = devm_kcalloc(handle->dev, pinfo->num_domains,
+				       sizeof(*pinfo->dom_info), GFP_KERNEL);
+	if (!pinfo->dom_info)
+		return -ENOMEM;
+
+	for (domain = 0; domain < pinfo->num_domains; domain++) {
+		struct reset_dom_info *dom = pinfo->dom_info + domain;
+
+		scmi_reset_domain_attributes_get(handle, domain, dom);
+	}
+
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_RESET, SCMI_PROTO_QUEUE_SZ,
+				      &reset_event_ops, reset_events,
+				      ARRAY_SIZE(reset_events),
+				      pinfo->num_domains);
+
+	pinfo->version = version;
+	handle->reset_ops = &reset_ops;
+	handle->reset_priv = pinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_RESET, reset)
diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
new file mode 100644
index 000000000..af74e521f
--- /dev/null
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SCMI Generic power domain support.
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_domain.h>
+#include <linux/scmi_protocol.h>
+
+struct scmi_pm_domain {
+	struct generic_pm_domain genpd;
+	const struct scmi_handle *handle;
+	const char *name;
+	u32 domain;
+};
+
+#define to_scmi_pd(gpd) container_of(gpd, struct scmi_pm_domain, genpd)
+
+static int scmi_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	int ret;
+	u32 state, ret_state;
+	struct scmi_pm_domain *pd = to_scmi_pd(domain);
+	const struct scmi_power_ops *ops = pd->handle->power_ops;
+
+	if (power_on)
+		state = SCMI_POWER_STATE_GENERIC_ON;
+	else
+		state = SCMI_POWER_STATE_GENERIC_OFF;
+
+	ret = ops->state_set(pd->handle, pd->domain, state);
+	if (!ret)
+		ret = ops->state_get(pd->handle, pd->domain, &ret_state);
+	if (!ret && state != ret_state)
+		return -EIO;
+
+	return ret;
+}
+
+static int scmi_pd_power_on(struct generic_pm_domain *domain)
+{
+	return scmi_pd_power(domain, true);
+}
+
+static int scmi_pd_power_off(struct generic_pm_domain *domain)
+{
+	return scmi_pd_power(domain, false);
+}
+
+static int scmi_pm_domain_probe(struct scmi_device *sdev)
+{
+	int num_domains, i;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+	struct scmi_pm_domain *scmi_pd;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct generic_pm_domain **domains;
+	const struct scmi_handle *handle = sdev->handle;
+
+	if (!handle || !handle->power_ops)
+		return -ENODEV;
+
+	num_domains = handle->power_ops->num_domains_get(handle);
+	if (num_domains < 0) {
+		dev_err(dev, "number of domains not found\n");
+		return num_domains;
+	}
+
+	scmi_pd = devm_kcalloc(dev, num_domains, sizeof(*scmi_pd), GFP_KERNEL);
+	if (!scmi_pd)
+		return -ENOMEM;
+
+	scmi_pd_data = devm_kzalloc(dev, sizeof(*scmi_pd_data), GFP_KERNEL);
+	if (!scmi_pd_data)
+		return -ENOMEM;
+
+	domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	for (i = 0; i < num_domains; i++, scmi_pd++) {
+		u32 state;
+
+		if (handle->power_ops->state_get(handle, i, &state)) {
+			dev_warn(dev, "failed to get state for domain %d\n", i);
+			continue;
+		}
+
+		scmi_pd->domain = i;
+		scmi_pd->handle = handle;
+		scmi_pd->name = handle->power_ops->name_get(handle, i);
+		scmi_pd->genpd.name = scmi_pd->name;
+		scmi_pd->genpd.power_off = scmi_pd_power_off;
+		scmi_pd->genpd.power_on = scmi_pd_power_on;
+
+		pm_genpd_init(&scmi_pd->genpd, NULL,
+			      state == SCMI_POWER_STATE_GENERIC_OFF);
+
+		domains[i] = &scmi_pd->genpd;
+	}
+
+	scmi_pd_data->domains = domains;
+	scmi_pd_data->num_domains = num_domains;
+
+	dev_set_drvdata(dev, scmi_pd_data);
+
+	return of_genpd_add_provider_onecell(np, scmi_pd_data);
+}
+
+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
+static const struct scmi_device_id scmi_id_table[] = {
+	{ SCMI_PROTOCOL_POWER, "genpd" },
+	{ },
+};
+MODULE_DEVICE_TABLE(scmi, scmi_id_table);
+
+static struct scmi_driver scmi_power_domain_driver = {
+	.name = "scmi-power-domain",
+	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
+	.id_table = scmi_id_table,
+};
+module_scmi_driver(scmi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI power domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
new file mode 100644
index 000000000..b4232d611
--- /dev/null
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Sensor Protocol
+ *
+ * Copyright (C) 2018 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+enum scmi_sensor_protocol_cmd {
+	SENSOR_DESCRIPTION_GET = 0x3,
+	SENSOR_TRIP_POINT_NOTIFY = 0x4,
+	SENSOR_TRIP_POINT_CONFIG = 0x5,
+	SENSOR_READING_GET = 0x6,
+};
+
+struct scmi_msg_resp_sensor_attributes {
+	__le16 num_sensors;
+	u8 max_requests;
+	u8 reserved;
+	__le32 reg_addr_low;
+	__le32 reg_addr_high;
+	__le32 reg_size;
+};
+
+struct scmi_msg_resp_sensor_description {
+	__le16 num_returned;
+	__le16 num_remaining;
+	struct {
+		__le32 id;
+		__le32 attributes_low;
+#define SUPPORTS_ASYNC_READ(x)	((x) & BIT(31))
+#define NUM_TRIP_POINTS(x)	((x) & 0xff)
+		__le32 attributes_high;
+#define SENSOR_TYPE(x)		((x) & 0xff)
+#define SENSOR_SCALE(x)		(((x) >> 11) & 0x1f)
+#define SENSOR_SCALE_SIGN	BIT(4)
+#define SENSOR_SCALE_EXTEND	GENMASK(7, 5)
+#define SENSOR_UPDATE_SCALE(x)	(((x) >> 22) & 0x1f)
+#define SENSOR_UPDATE_BASE(x)	(((x) >> 27) & 0x1f)
+		    u8 name[SCMI_MAX_STR_SIZE];
+	} desc[0];
+};
+
+struct scmi_msg_sensor_trip_point_notify {
+	__le32 id;
+	__le32 event_control;
+#define SENSOR_TP_NOTIFY_ALL	BIT(0)
+};
+
+struct scmi_msg_set_sensor_trip_point {
+	__le32 id;
+	__le32 event_control;
+#define SENSOR_TP_EVENT_MASK	(0x3)
+#define SENSOR_TP_DISABLED	0x0
+#define SENSOR_TP_POSITIVE	0x1
+#define SENSOR_TP_NEGATIVE	0x2
+#define SENSOR_TP_BOTH		0x3
+#define SENSOR_TP_ID(x)		(((x) & 0xff) << 4)
+	__le32 value_low;
+	__le32 value_high;
+};
+
+struct scmi_msg_sensor_reading_get {
+	__le32 id;
+	__le32 flags;
+#define SENSOR_READ_ASYNC	BIT(0)
+};
+
+struct scmi_sensor_trip_notify_payld {
+	__le32 agent_id;
+	__le32 sensor_id;
+	__le32 trip_point_desc;
+};
+
+struct sensors_info {
+	u32 version;
+	int num_sensors;
+	int max_requests;
+	u64 reg_addr;
+	u32 reg_size;
+	struct scmi_sensor_info *sensors;
+};
+
+static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
+				      struct sensors_info *si)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_sensor_attributes *attr;
+
+	ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES,
+				 SCMI_PROTOCOL_SENSOR, 0, sizeof(*attr), &t);
+	if (ret)
+		return ret;
+
+	attr = t->rx.buf;
+
+	ret = scmi_do_xfer(handle, t);
+	if (!ret) {
+		si->num_sensors = le16_to_cpu(attr->num_sensors);
+		si->max_requests = attr->max_requests;
+		si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
+				(u64)le32_to_cpu(attr->reg_addr_high) << 32;
+		si->reg_size = le32_to_cpu(attr->reg_size);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_sensor_description_get(const struct scmi_handle *handle,
+				       struct sensors_info *si)
+{
+	int ret, cnt;
+	u32 desc_index = 0;
+	u16 num_returned, num_remaining;
+	struct scmi_xfer *t;
+	struct scmi_msg_resp_sensor_description *buf;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_DESCRIPTION_GET,
+				 SCMI_PROTOCOL_SENSOR, sizeof(__le32), 0, &t);
+	if (ret)
+		return ret;
+
+	buf = t->rx.buf;
+
+	do {
+		/* Set the number of sensors to be skipped/already read */
+		put_unaligned_le32(desc_index, t->tx.buf);
+
+		ret = scmi_do_xfer(handle, t);
+		if (ret)
+			break;
+
+		num_returned = le16_to_cpu(buf->num_returned);
+		num_remaining = le16_to_cpu(buf->num_remaining);
+
+		if (desc_index + num_returned > si->num_sensors) {
+			dev_err(handle->dev, "No. of sensors can't exceed %d",
+				si->num_sensors);
+			break;
+		}
+
+		for (cnt = 0; cnt < num_returned; cnt++) {
+			u32 attrh, attrl;
+			struct scmi_sensor_info *s;
+
+			attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
+			attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
+			s = &si->sensors[desc_index + cnt];
+			s->id = le32_to_cpu(buf->desc[cnt].id);
+			s->type = SENSOR_TYPE(attrh);
+			s->scale = SENSOR_SCALE(attrh);
+			/* Sign extend to a full s8 */
+			if (s->scale & SENSOR_SCALE_SIGN)
+				s->scale |= SENSOR_SCALE_EXTEND;
+			s->async = SUPPORTS_ASYNC_READ(attrl);
+			s->num_trip_points = NUM_TRIP_POINTS(attrl);
+			strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
+		}
+
+		desc_index += num_returned;
+
+		scmi_reset_rx_to_maxsz(handle, t);
+		/*
+		 * check for both returned and remaining to avoid infinite
+		 * loop due to buggy firmware
+		 */
+	} while (num_returned && num_remaining);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
+					 u32 sensor_id, bool enable)
+{
+	int ret;
+	u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
+	struct scmi_xfer *t;
+	struct scmi_msg_sensor_trip_point_notify *cfg;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
+				 SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
+	if (ret)
+		return ret;
+
+	cfg = t->tx.buf;
+	cfg->id = cpu_to_le32(sensor_id);
+	cfg->event_control = cpu_to_le32(evt_cntl);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int
+scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
+			      u8 trip_id, u64 trip_value)
+{
+	int ret;
+	u32 evt_cntl = SENSOR_TP_BOTH;
+	struct scmi_xfer *t;
+	struct scmi_msg_set_sensor_trip_point *trip;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_CONFIG,
+				 SCMI_PROTOCOL_SENSOR, sizeof(*trip), 0, &t);
+	if (ret)
+		return ret;
+
+	trip = t->tx.buf;
+	trip->id = cpu_to_le32(sensor_id);
+	trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
+	trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
+	trip->value_high = cpu_to_le32(trip_value >> 32);
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_sensor_reading_get(const struct scmi_handle *handle,
+				   u32 sensor_id, u64 *value)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_msg_sensor_reading_get *sensor;
+	struct sensors_info *si = handle->sensor_priv;
+	struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+	ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
+				 SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
+				 sizeof(u64), &t);
+	if (ret)
+		return ret;
+
+	sensor = t->tx.buf;
+	sensor->id = cpu_to_le32(sensor_id);
+
+	if (s->async) {
+		sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
+		ret = scmi_do_xfer_with_response(handle, t);
+		if (!ret)
+			*value = get_unaligned_le64((void *)
+						    ((__le32 *)t->rx.buf + 1));
+	} else {
+		sensor->flags = cpu_to_le32(0);
+		ret = scmi_do_xfer(handle, t);
+		if (!ret)
+			*value = get_unaligned_le64(t->rx.buf);
+	}
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static const struct scmi_sensor_info *
+scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id)
+{
+	struct sensors_info *si = handle->sensor_priv;
+
+	return si->sensors + sensor_id;
+}
+
+static int scmi_sensor_count_get(const struct scmi_handle *handle)
+{
+	struct sensors_info *si = handle->sensor_priv;
+
+	return si->num_sensors;
+}
+
+static const struct scmi_sensor_ops sensor_ops = {
+	.count_get = scmi_sensor_count_get,
+	.info_get = scmi_sensor_info_get,
+	.trip_point_config = scmi_sensor_trip_point_config,
+	.reading_get = scmi_sensor_reading_get,
+};
+
+static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
+					  u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
+			 evt_id, src_id, ret);
+
+	return ret;
+}
+
+static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle,
+					    u8 evt_id, ktime_t timestamp,
+					    const void *payld, size_t payld_sz,
+					    void *report, u32 *src_id)
+{
+	const struct scmi_sensor_trip_notify_payld *p = payld;
+	struct scmi_sensor_trip_point_report *r = report;
+
+	if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT ||
+	    sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->sensor_id = le32_to_cpu(p->sensor_id);
+	r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
+	*src_id = r->sensor_id;
+
+	return r;
+}
+
+static const struct scmi_event sensor_events[] = {
+	{
+		.id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT,
+		.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
+		.max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
+	},
+};
+
+static const struct scmi_event_ops sensor_event_ops = {
+	.set_notify_enabled = scmi_sensor_set_notify_enabled,
+	.fill_custom_report = scmi_sensor_fill_custom_report,
+};
+
+static int scmi_sensors_protocol_init(struct scmi_handle *handle)
+{
+	u32 version;
+	struct sensors_info *sinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version);
+
+	dev_dbg(handle->dev, "Sensor Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL);
+	if (!sinfo)
+		return -ENOMEM;
+
+	scmi_sensor_attributes_get(handle, sinfo);
+
+	sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors,
+				      sizeof(*sinfo->sensors), GFP_KERNEL);
+	if (!sinfo->sensors)
+		return -ENOMEM;
+
+	scmi_sensor_description_get(handle, sinfo);
+
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ,
+				      &sensor_event_ops, sensor_events,
+				      ARRAY_SIZE(sensor_events),
+				      sinfo->num_sensors);
+
+	sinfo->version = version;
+	handle->sensor_ops = &sensor_ops;
+	handle->sensor_priv = sinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_SENSOR, sensors)
diff --git a/drivers/firmware/arm_scmi/shmem.c b/drivers/firmware/arm_scmi/shmem.c
new file mode 100644
index 000000000..56a1f61aa
--- /dev/null
+++ b/drivers/firmware/arm_scmi/shmem.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * For transport using shared mem structure.
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/processor.h>
+#include <linux/types.h>
+
+#include "common.h"
+
+/*
+ * SCMI specification requires all parameters, message headers, return
+ * arguments or any protocol data to be expressed in little endian
+ * format only.
+ */
+struct scmi_shared_mem {
+	__le32 reserved;
+	__le32 channel_status;
+#define SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR	BIT(1)
+#define SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE	BIT(0)
+	__le32 reserved1[2];
+	__le32 flags;
+#define SCMI_SHMEM_FLAG_INTR_ENABLED	BIT(0)
+	__le32 length;
+	__le32 msg_header;
+	u8 msg_payload[];
+};
+
+void shmem_tx_prepare(struct scmi_shared_mem __iomem *shmem,
+		      struct scmi_xfer *xfer)
+{
+	/*
+	 * Ideally channel must be free by now unless OS timeout last
+	 * request and platform continued to process the same, wait
+	 * until it releases the shared memory, otherwise we may endup
+	 * overwriting its response with new message payload or vice-versa
+	 */
+	spin_until_cond(ioread32(&shmem->channel_status) &
+			SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+	/* Mark channel busy + clear error */
+	iowrite32(0x0, &shmem->channel_status);
+	iowrite32(xfer->hdr.poll_completion ? 0 : SCMI_SHMEM_FLAG_INTR_ENABLED,
+		  &shmem->flags);
+	iowrite32(sizeof(shmem->msg_header) + xfer->tx.len, &shmem->length);
+	iowrite32(pack_scmi_header(&xfer->hdr), &shmem->msg_header);
+	if (xfer->tx.buf)
+		memcpy_toio(shmem->msg_payload, xfer->tx.buf, xfer->tx.len);
+}
+
+u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem)
+{
+	return ioread32(&shmem->msg_header);
+}
+
+void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
+			  struct scmi_xfer *xfer)
+{
+	size_t len = ioread32(&shmem->length);
+
+	xfer->hdr.status = ioread32(shmem->msg_payload);
+	/* Skip the length of header and status in shmem area i.e 8 bytes */
+	xfer->rx.len = min_t(size_t, xfer->rx.len, len > 8 ? len - 8 : 0);
+
+	/* Take a copy to the rx buffer.. */
+	memcpy_fromio(xfer->rx.buf, shmem->msg_payload + 4, xfer->rx.len);
+}
+
+void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
+			      size_t max_len, struct scmi_xfer *xfer)
+{
+	size_t len = ioread32(&shmem->length);
+
+	/* Skip only the length of header in shmem area i.e 4 bytes */
+	xfer->rx.len = min_t(size_t, max_len, len > 4 ? len - 4 : 0);
+
+	/* Take a copy to the rx buffer.. */
+	memcpy_fromio(xfer->rx.buf, shmem->msg_payload, xfer->rx.len);
+}
+
+void shmem_clear_channel(struct scmi_shared_mem __iomem *shmem)
+{
+	iowrite32(SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE, &shmem->channel_status);
+}
+
+bool shmem_poll_done(struct scmi_shared_mem __iomem *shmem,
+		     struct scmi_xfer *xfer)
+{
+	u16 xfer_id;
+
+	xfer_id = MSG_XTRACT_TOKEN(ioread32(&shmem->msg_header));
+
+	if (xfer->hdr.seq != xfer_id)
+		return false;
+
+	return ioread32(&shmem->channel_status) &
+		(SCMI_SHMEM_CHAN_STAT_CHANNEL_ERROR |
+		 SCMI_SHMEM_CHAN_STAT_CHANNEL_FREE);
+}
diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c
new file mode 100644
index 000000000..82a82a5dc
--- /dev/null
+++ b/drivers/firmware/arm_scmi/smc.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message SMC/HVC
+ * Transport driver
+ *
+ * Copyright 2020 NXP
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "common.h"
+
+/**
+ * struct scmi_smc - Structure representing a SCMI smc transport
+ *
+ * @cinfo: SCMI channel info
+ * @shmem: Transmit/Receive shared memory area
+ * @shmem_lock: Lock to protect access to Tx/Rx shared memory area
+ * @func_id: smc/hvc call function id
+ */
+
+struct scmi_smc {
+	struct scmi_chan_info *cinfo;
+	struct scmi_shared_mem __iomem *shmem;
+	struct mutex shmem_lock;
+	u32 func_id;
+};
+
+static bool smc_chan_available(struct device *dev, int idx)
+{
+	struct device_node *np = of_parse_phandle(dev->of_node, "shmem", 0);
+	if (!np)
+		return false;
+
+	of_node_put(np);
+	return true;
+}
+
+static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
+			  bool tx)
+{
+	struct device *cdev = cinfo->dev;
+	struct scmi_smc *scmi_info;
+	resource_size_t size;
+	struct resource res;
+	struct device_node *np;
+	u32 func_id;
+	int ret;
+
+	if (!tx)
+		return -ENODEV;
+
+	scmi_info = devm_kzalloc(dev, sizeof(*scmi_info), GFP_KERNEL);
+	if (!scmi_info)
+		return -ENOMEM;
+
+	np = of_parse_phandle(cdev->of_node, "shmem", 0);
+	ret = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
+	if (ret) {
+		dev_err(cdev, "failed to get SCMI Tx shared memory\n");
+		return ret;
+	}
+
+	size = resource_size(&res);
+	scmi_info->shmem = devm_ioremap(dev, res.start, size);
+	if (!scmi_info->shmem) {
+		dev_err(dev, "failed to ioremap SCMI Tx shared memory\n");
+		return -EADDRNOTAVAIL;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "arm,smc-id", &func_id);
+	if (ret < 0)
+		return ret;
+
+	scmi_info->func_id = func_id;
+	scmi_info->cinfo = cinfo;
+	mutex_init(&scmi_info->shmem_lock);
+	cinfo->transport_info = scmi_info;
+
+	return 0;
+}
+
+static int smc_chan_free(int id, void *p, void *data)
+{
+	struct scmi_chan_info *cinfo = p;
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	cinfo->transport_info = NULL;
+	scmi_info->cinfo = NULL;
+
+	scmi_free_channel(cinfo, data, id);
+
+	return 0;
+}
+
+static int smc_send_message(struct scmi_chan_info *cinfo,
+			    struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+	struct arm_smccc_res res;
+
+	mutex_lock(&scmi_info->shmem_lock);
+
+	shmem_tx_prepare(scmi_info->shmem, xfer);
+
+	arm_smccc_1_1_invoke(scmi_info->func_id, 0, 0, 0, 0, 0, 0, 0, &res);
+	scmi_rx_callback(scmi_info->cinfo, shmem_read_header(scmi_info->shmem));
+
+	mutex_unlock(&scmi_info->shmem_lock);
+
+	/* Only SMCCC_RET_NOT_SUPPORTED is valid error code */
+	if (res.a0)
+		return -EOPNOTSUPP;
+	return 0;
+}
+
+static void smc_fetch_response(struct scmi_chan_info *cinfo,
+			       struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	shmem_fetch_response(scmi_info->shmem, xfer);
+}
+
+static bool
+smc_poll_done(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
+{
+	struct scmi_smc *scmi_info = cinfo->transport_info;
+
+	return shmem_poll_done(scmi_info->shmem, xfer);
+}
+
+static const struct scmi_transport_ops scmi_smc_ops = {
+	.chan_available = smc_chan_available,
+	.chan_setup = smc_chan_setup,
+	.chan_free = smc_chan_free,
+	.send_message = smc_send_message,
+	.fetch_response = smc_fetch_response,
+	.poll_done = smc_poll_done,
+};
+
+const struct scmi_desc scmi_smc_desc = {
+	.ops = &scmi_smc_ops,
+	.max_rx_timeout_ms = 30,
+	.max_msg = 20,
+	.max_msg_size = 128,
+};
diff --git a/drivers/firmware/arm_scmi/system.c b/drivers/firmware/arm_scmi/system.c
new file mode 100644
index 000000000..283e12d5f
--- /dev/null
+++ b/drivers/firmware/arm_scmi/system.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) System Power Protocol
+ *
+ * Copyright (C) 2020 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "SCMI Notifications SYSTEM - " fmt
+
+#include <linux/scmi_protocol.h>
+
+#include "common.h"
+#include "notify.h"
+
+#define SCMI_SYSTEM_NUM_SOURCES		1
+
+enum scmi_system_protocol_cmd {
+	SYSTEM_POWER_STATE_NOTIFY = 0x5,
+};
+
+struct scmi_system_power_state_notify {
+	__le32 notify_enable;
+};
+
+struct scmi_system_power_state_notifier_payld {
+	__le32 agent_id;
+	__le32 flags;
+	__le32 system_state;
+};
+
+struct scmi_system_info {
+	u32 version;
+};
+
+static int scmi_system_request_notify(const struct scmi_handle *handle,
+				      bool enable)
+{
+	int ret;
+	struct scmi_xfer *t;
+	struct scmi_system_power_state_notify *notify;
+
+	ret = scmi_xfer_get_init(handle, SYSTEM_POWER_STATE_NOTIFY,
+				 SCMI_PROTOCOL_SYSTEM, sizeof(*notify), 0, &t);
+	if (ret)
+		return ret;
+
+	notify = t->tx.buf;
+	notify->notify_enable = enable ? cpu_to_le32(BIT(0)) : 0;
+
+	ret = scmi_do_xfer(handle, t);
+
+	scmi_xfer_put(handle, t);
+	return ret;
+}
+
+static int scmi_system_set_notify_enabled(const struct scmi_handle *handle,
+					  u8 evt_id, u32 src_id, bool enable)
+{
+	int ret;
+
+	ret = scmi_system_request_notify(handle, enable);
+	if (ret)
+		pr_debug("FAIL_ENABLE - evt[%X] - ret:%d\n", evt_id, ret);
+
+	return ret;
+}
+
+static void *scmi_system_fill_custom_report(const struct scmi_handle *handle,
+					    u8 evt_id, ktime_t timestamp,
+					    const void *payld, size_t payld_sz,
+					    void *report, u32 *src_id)
+{
+	const struct scmi_system_power_state_notifier_payld *p = payld;
+	struct scmi_system_power_state_notifier_report *r = report;
+
+	if (evt_id != SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER ||
+	    sizeof(*p) != payld_sz)
+		return NULL;
+
+	r->timestamp = timestamp;
+	r->agent_id = le32_to_cpu(p->agent_id);
+	r->flags = le32_to_cpu(p->flags);
+	r->system_state = le32_to_cpu(p->system_state);
+	*src_id = 0;
+
+	return r;
+}
+
+static const struct scmi_event system_events[] = {
+	{
+		.id = SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER,
+		.max_payld_sz =
+			sizeof(struct scmi_system_power_state_notifier_payld),
+		.max_report_sz =
+			sizeof(struct scmi_system_power_state_notifier_report),
+	},
+};
+
+static const struct scmi_event_ops system_event_ops = {
+	.set_notify_enabled = scmi_system_set_notify_enabled,
+	.fill_custom_report = scmi_system_fill_custom_report,
+};
+
+static int scmi_system_protocol_init(struct scmi_handle *handle)
+{
+	u32 version;
+	struct scmi_system_info *pinfo;
+
+	scmi_version_get(handle, SCMI_PROTOCOL_SYSTEM, &version);
+
+	dev_dbg(handle->dev, "System Power Version %d.%d\n",
+		PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
+
+	pinfo = devm_kzalloc(handle->dev, sizeof(*pinfo), GFP_KERNEL);
+	if (!pinfo)
+		return -ENOMEM;
+
+	scmi_register_protocol_events(handle,
+				      SCMI_PROTOCOL_SYSTEM, SCMI_PROTO_QUEUE_SZ,
+				      &system_event_ops,
+				      system_events,
+				      ARRAY_SIZE(system_events),
+				      SCMI_SYSTEM_NUM_SOURCES);
+
+	pinfo->version = version;
+	handle->system_priv = pinfo;
+
+	return 0;
+}
+
+DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_SYSTEM, system)
diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
new file mode 100644
index 000000000..36391cb51
--- /dev/null
+++ b/drivers/firmware/arm_scpi.c
@@ -0,0 +1,1049 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * System Control and Power Interface (SCPI) Message Protocol driver
+ *
+ * SCPI Message Protocol is used between the System Control Processor(SCP)
+ * and the Application Processors(AP). The Message Handling Unit(MHU)
+ * provides a mechanism for inter-processor communication between SCP's
+ * Cortex M3 and AP.
+ *
+ * SCP offers control and management of the core/cluster power states,
+ * various power domain DVFS including the core/cluster, certain system
+ * clocks configuration, thermal sensors and many others.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/spinlock.h>
+
+#define CMD_ID_MASK		GENMASK(6, 0)
+#define CMD_TOKEN_ID_MASK	GENMASK(15, 8)
+#define CMD_DATA_SIZE_MASK	GENMASK(24, 16)
+#define CMD_LEGACY_DATA_SIZE_MASK	GENMASK(28, 20)
+#define PACK_SCPI_CMD(cmd_id, tx_sz)		\
+	(FIELD_PREP(CMD_ID_MASK, cmd_id) |	\
+	FIELD_PREP(CMD_DATA_SIZE_MASK, tx_sz))
+#define PACK_LEGACY_SCPI_CMD(cmd_id, tx_sz)	\
+	(FIELD_PREP(CMD_ID_MASK, cmd_id) |	\
+	FIELD_PREP(CMD_LEGACY_DATA_SIZE_MASK, tx_sz))
+
+#define CMD_SIZE(cmd)	FIELD_GET(CMD_DATA_SIZE_MASK, cmd)
+#define CMD_UNIQ_MASK	(CMD_TOKEN_ID_MASK | CMD_ID_MASK)
+#define CMD_XTRACT_UNIQ(cmd)	((cmd) & CMD_UNIQ_MASK)
+
+#define SCPI_SLOT		0
+
+#define MAX_DVFS_DOMAINS	8
+#define MAX_DVFS_OPPS		16
+
+#define PROTO_REV_MAJOR_MASK	GENMASK(31, 16)
+#define PROTO_REV_MINOR_MASK	GENMASK(15, 0)
+
+#define FW_REV_MAJOR_MASK	GENMASK(31, 24)
+#define FW_REV_MINOR_MASK	GENMASK(23, 16)
+#define FW_REV_PATCH_MASK	GENMASK(15, 0)
+
+#define MAX_RX_TIMEOUT		(msecs_to_jiffies(30))
+
+enum scpi_error_codes {
+	SCPI_SUCCESS = 0, /* Success */
+	SCPI_ERR_PARAM = 1, /* Invalid parameter(s) */
+	SCPI_ERR_ALIGN = 2, /* Invalid alignment */
+	SCPI_ERR_SIZE = 3, /* Invalid size */
+	SCPI_ERR_HANDLER = 4, /* Invalid handler/callback */
+	SCPI_ERR_ACCESS = 5, /* Invalid access/permission denied */
+	SCPI_ERR_RANGE = 6, /* Value out of range */
+	SCPI_ERR_TIMEOUT = 7, /* Timeout has occurred */
+	SCPI_ERR_NOMEM = 8, /* Invalid memory area or pointer */
+	SCPI_ERR_PWRSTATE = 9, /* Invalid power state */
+	SCPI_ERR_SUPPORT = 10, /* Not supported or disabled */
+	SCPI_ERR_DEVICE = 11, /* Device error */
+	SCPI_ERR_BUSY = 12, /* Device busy */
+	SCPI_ERR_MAX
+};
+
+/* SCPI Standard commands */
+enum scpi_std_cmd {
+	SCPI_CMD_INVALID		= 0x00,
+	SCPI_CMD_SCPI_READY		= 0x01,
+	SCPI_CMD_SCPI_CAPABILITIES	= 0x02,
+	SCPI_CMD_SET_CSS_PWR_STATE	= 0x03,
+	SCPI_CMD_GET_CSS_PWR_STATE	= 0x04,
+	SCPI_CMD_SET_SYS_PWR_STATE	= 0x05,
+	SCPI_CMD_SET_CPU_TIMER		= 0x06,
+	SCPI_CMD_CANCEL_CPU_TIMER	= 0x07,
+	SCPI_CMD_DVFS_CAPABILITIES	= 0x08,
+	SCPI_CMD_GET_DVFS_INFO		= 0x09,
+	SCPI_CMD_SET_DVFS		= 0x0a,
+	SCPI_CMD_GET_DVFS		= 0x0b,
+	SCPI_CMD_GET_DVFS_STAT		= 0x0c,
+	SCPI_CMD_CLOCK_CAPABILITIES	= 0x0d,
+	SCPI_CMD_GET_CLOCK_INFO		= 0x0e,
+	SCPI_CMD_SET_CLOCK_VALUE	= 0x0f,
+	SCPI_CMD_GET_CLOCK_VALUE	= 0x10,
+	SCPI_CMD_PSU_CAPABILITIES	= 0x11,
+	SCPI_CMD_GET_PSU_INFO		= 0x12,
+	SCPI_CMD_SET_PSU		= 0x13,
+	SCPI_CMD_GET_PSU		= 0x14,
+	SCPI_CMD_SENSOR_CAPABILITIES	= 0x15,
+	SCPI_CMD_SENSOR_INFO		= 0x16,
+	SCPI_CMD_SENSOR_VALUE		= 0x17,
+	SCPI_CMD_SENSOR_CFG_PERIODIC	= 0x18,
+	SCPI_CMD_SENSOR_CFG_BOUNDS	= 0x19,
+	SCPI_CMD_SENSOR_ASYNC_VALUE	= 0x1a,
+	SCPI_CMD_SET_DEVICE_PWR_STATE	= 0x1b,
+	SCPI_CMD_GET_DEVICE_PWR_STATE	= 0x1c,
+	SCPI_CMD_COUNT
+};
+
+/* SCPI Legacy Commands */
+enum legacy_scpi_std_cmd {
+	LEGACY_SCPI_CMD_INVALID			= 0x00,
+	LEGACY_SCPI_CMD_SCPI_READY		= 0x01,
+	LEGACY_SCPI_CMD_SCPI_CAPABILITIES	= 0x02,
+	LEGACY_SCPI_CMD_EVENT			= 0x03,
+	LEGACY_SCPI_CMD_SET_CSS_PWR_STATE	= 0x04,
+	LEGACY_SCPI_CMD_GET_CSS_PWR_STATE	= 0x05,
+	LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT	= 0x06,
+	LEGACY_SCPI_CMD_GET_PWR_STATE_STAT	= 0x07,
+	LEGACY_SCPI_CMD_SYS_PWR_STATE		= 0x08,
+	LEGACY_SCPI_CMD_L2_READY		= 0x09,
+	LEGACY_SCPI_CMD_SET_AP_TIMER		= 0x0a,
+	LEGACY_SCPI_CMD_CANCEL_AP_TIME		= 0x0b,
+	LEGACY_SCPI_CMD_DVFS_CAPABILITIES	= 0x0c,
+	LEGACY_SCPI_CMD_GET_DVFS_INFO		= 0x0d,
+	LEGACY_SCPI_CMD_SET_DVFS		= 0x0e,
+	LEGACY_SCPI_CMD_GET_DVFS		= 0x0f,
+	LEGACY_SCPI_CMD_GET_DVFS_STAT		= 0x10,
+	LEGACY_SCPI_CMD_SET_RTC			= 0x11,
+	LEGACY_SCPI_CMD_GET_RTC			= 0x12,
+	LEGACY_SCPI_CMD_CLOCK_CAPABILITIES	= 0x13,
+	LEGACY_SCPI_CMD_SET_CLOCK_INDEX		= 0x14,
+	LEGACY_SCPI_CMD_SET_CLOCK_VALUE		= 0x15,
+	LEGACY_SCPI_CMD_GET_CLOCK_VALUE		= 0x16,
+	LEGACY_SCPI_CMD_PSU_CAPABILITIES	= 0x17,
+	LEGACY_SCPI_CMD_SET_PSU			= 0x18,
+	LEGACY_SCPI_CMD_GET_PSU			= 0x19,
+	LEGACY_SCPI_CMD_SENSOR_CAPABILITIES	= 0x1a,
+	LEGACY_SCPI_CMD_SENSOR_INFO		= 0x1b,
+	LEGACY_SCPI_CMD_SENSOR_VALUE		= 0x1c,
+	LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC	= 0x1d,
+	LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS	= 0x1e,
+	LEGACY_SCPI_CMD_SENSOR_ASYNC_VALUE	= 0x1f,
+	LEGACY_SCPI_CMD_COUNT
+};
+
+/* List all commands that are required to go through the high priority link */
+static int legacy_hpriority_cmds[] = {
+	LEGACY_SCPI_CMD_GET_CSS_PWR_STATE,
+	LEGACY_SCPI_CMD_CFG_PWR_STATE_STAT,
+	LEGACY_SCPI_CMD_GET_PWR_STATE_STAT,
+	LEGACY_SCPI_CMD_SET_DVFS,
+	LEGACY_SCPI_CMD_GET_DVFS,
+	LEGACY_SCPI_CMD_SET_RTC,
+	LEGACY_SCPI_CMD_GET_RTC,
+	LEGACY_SCPI_CMD_SET_CLOCK_INDEX,
+	LEGACY_SCPI_CMD_SET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_GET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_SET_PSU,
+	LEGACY_SCPI_CMD_GET_PSU,
+	LEGACY_SCPI_CMD_SENSOR_CFG_PERIODIC,
+	LEGACY_SCPI_CMD_SENSOR_CFG_BOUNDS,
+};
+
+/* List all commands used by this driver, used as indexes */
+enum scpi_drv_cmds {
+	CMD_SCPI_CAPABILITIES = 0,
+	CMD_GET_CLOCK_INFO,
+	CMD_GET_CLOCK_VALUE,
+	CMD_SET_CLOCK_VALUE,
+	CMD_GET_DVFS,
+	CMD_SET_DVFS,
+	CMD_GET_DVFS_INFO,
+	CMD_SENSOR_CAPABILITIES,
+	CMD_SENSOR_INFO,
+	CMD_SENSOR_VALUE,
+	CMD_SET_DEVICE_PWR_STATE,
+	CMD_GET_DEVICE_PWR_STATE,
+	CMD_MAX_COUNT,
+};
+
+static int scpi_std_commands[CMD_MAX_COUNT] = {
+	SCPI_CMD_SCPI_CAPABILITIES,
+	SCPI_CMD_GET_CLOCK_INFO,
+	SCPI_CMD_GET_CLOCK_VALUE,
+	SCPI_CMD_SET_CLOCK_VALUE,
+	SCPI_CMD_GET_DVFS,
+	SCPI_CMD_SET_DVFS,
+	SCPI_CMD_GET_DVFS_INFO,
+	SCPI_CMD_SENSOR_CAPABILITIES,
+	SCPI_CMD_SENSOR_INFO,
+	SCPI_CMD_SENSOR_VALUE,
+	SCPI_CMD_SET_DEVICE_PWR_STATE,
+	SCPI_CMD_GET_DEVICE_PWR_STATE,
+};
+
+static int scpi_legacy_commands[CMD_MAX_COUNT] = {
+	LEGACY_SCPI_CMD_SCPI_CAPABILITIES,
+	-1, /* GET_CLOCK_INFO */
+	LEGACY_SCPI_CMD_GET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_SET_CLOCK_VALUE,
+	LEGACY_SCPI_CMD_GET_DVFS,
+	LEGACY_SCPI_CMD_SET_DVFS,
+	LEGACY_SCPI_CMD_GET_DVFS_INFO,
+	LEGACY_SCPI_CMD_SENSOR_CAPABILITIES,
+	LEGACY_SCPI_CMD_SENSOR_INFO,
+	LEGACY_SCPI_CMD_SENSOR_VALUE,
+	-1, /* SET_DEVICE_PWR_STATE */
+	-1, /* GET_DEVICE_PWR_STATE */
+};
+
+struct scpi_xfer {
+	u32 slot; /* has to be first element */
+	u32 cmd;
+	u32 status;
+	const void *tx_buf;
+	void *rx_buf;
+	unsigned int tx_len;
+	unsigned int rx_len;
+	struct list_head node;
+	struct completion done;
+};
+
+struct scpi_chan {
+	struct mbox_client cl;
+	struct mbox_chan *chan;
+	void __iomem *tx_payload;
+	void __iomem *rx_payload;
+	struct list_head rx_pending;
+	struct list_head xfers_list;
+	struct scpi_xfer *xfers;
+	spinlock_t rx_lock; /* locking for the rx pending list */
+	struct mutex xfers_lock;
+	u8 token;
+};
+
+struct scpi_drvinfo {
+	u32 protocol_version;
+	u32 firmware_version;
+	bool is_legacy;
+	int num_chans;
+	int *commands;
+	DECLARE_BITMAP(cmd_priority, LEGACY_SCPI_CMD_COUNT);
+	atomic_t next_chan;
+	struct scpi_ops *scpi_ops;
+	struct scpi_chan *channels;
+	struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
+};
+
+/*
+ * The SCP firmware only executes in little-endian mode, so any buffers
+ * shared through SCPI should have their contents converted to little-endian
+ */
+struct scpi_shared_mem {
+	__le32 command;
+	__le32 status;
+	u8 payload[];
+} __packed;
+
+struct legacy_scpi_shared_mem {
+	__le32 status;
+	u8 payload[];
+} __packed;
+
+struct scp_capabilities {
+	__le32 protocol_version;
+	__le32 event_version;
+	__le32 platform_version;
+	__le32 commands[4];
+} __packed;
+
+struct clk_get_info {
+	__le16 id;
+	__le16 flags;
+	__le32 min_rate;
+	__le32 max_rate;
+	u8 name[20];
+} __packed;
+
+struct clk_set_value {
+	__le16 id;
+	__le16 reserved;
+	__le32 rate;
+} __packed;
+
+struct legacy_clk_set_value {
+	__le32 rate;
+	__le16 id;
+	__le16 reserved;
+} __packed;
+
+struct dvfs_info {
+	u8 domain;
+	u8 opp_count;
+	__le16 latency;
+	struct {
+		__le32 freq;
+		__le32 m_volt;
+	} opps[MAX_DVFS_OPPS];
+} __packed;
+
+struct dvfs_set {
+	u8 domain;
+	u8 index;
+} __packed;
+
+struct _scpi_sensor_info {
+	__le16 sensor_id;
+	u8 class;
+	u8 trigger_type;
+	char name[20];
+};
+
+struct dev_pstate_set {
+	__le16 dev_id;
+	u8 pstate;
+} __packed;
+
+static struct scpi_drvinfo *scpi_info;
+
+static int scpi_linux_errmap[SCPI_ERR_MAX] = {
+	/* better than switch case as long as return value is continuous */
+	0, /* SCPI_SUCCESS */
+	-EINVAL, /* SCPI_ERR_PARAM */
+	-ENOEXEC, /* SCPI_ERR_ALIGN */
+	-EMSGSIZE, /* SCPI_ERR_SIZE */
+	-EINVAL, /* SCPI_ERR_HANDLER */
+	-EACCES, /* SCPI_ERR_ACCESS */
+	-ERANGE, /* SCPI_ERR_RANGE */
+	-ETIMEDOUT, /* SCPI_ERR_TIMEOUT */
+	-ENOMEM, /* SCPI_ERR_NOMEM */
+	-EINVAL, /* SCPI_ERR_PWRSTATE */
+	-EOPNOTSUPP, /* SCPI_ERR_SUPPORT */
+	-EIO, /* SCPI_ERR_DEVICE */
+	-EBUSY, /* SCPI_ERR_BUSY */
+};
+
+static inline int scpi_to_linux_errno(int errno)
+{
+	if (errno >= SCPI_SUCCESS && errno < SCPI_ERR_MAX)
+		return scpi_linux_errmap[errno];
+	return -EIO;
+}
+
+static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
+{
+	unsigned long flags;
+	struct scpi_xfer *t, *match = NULL;
+
+	spin_lock_irqsave(&ch->rx_lock, flags);
+	if (list_empty(&ch->rx_pending)) {
+		spin_unlock_irqrestore(&ch->rx_lock, flags);
+		return;
+	}
+
+	/* Command type is not replied by the SCP Firmware in legacy Mode
+	 * We should consider that command is the head of pending RX commands
+	 * if the list is not empty. In TX only mode, the list would be empty.
+	 */
+	if (scpi_info->is_legacy) {
+		match = list_first_entry(&ch->rx_pending, struct scpi_xfer,
+					 node);
+		list_del(&match->node);
+	} else {
+		list_for_each_entry(t, &ch->rx_pending, node)
+			if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) {
+				list_del(&t->node);
+				match = t;
+				break;
+			}
+	}
+	/* check if wait_for_completion is in progress or timed-out */
+	if (match && !completion_done(&match->done)) {
+		unsigned int len;
+
+		if (scpi_info->is_legacy) {
+			struct legacy_scpi_shared_mem __iomem *mem =
+							ch->rx_payload;
+
+			/* RX Length is not replied by the legacy Firmware */
+			len = match->rx_len;
+
+			match->status = ioread32(&mem->status);
+			memcpy_fromio(match->rx_buf, mem->payload, len);
+		} else {
+			struct scpi_shared_mem __iomem *mem = ch->rx_payload;
+
+			len = min_t(unsigned int, match->rx_len, CMD_SIZE(cmd));
+
+			match->status = ioread32(&mem->status);
+			memcpy_fromio(match->rx_buf, mem->payload, len);
+		}
+
+		if (match->rx_len > len)
+			memset(match->rx_buf + len, 0, match->rx_len - len);
+		complete(&match->done);
+	}
+	spin_unlock_irqrestore(&ch->rx_lock, flags);
+}
+
+static void scpi_handle_remote_msg(struct mbox_client *c, void *msg)
+{
+	struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+	struct scpi_shared_mem __iomem *mem = ch->rx_payload;
+	u32 cmd = 0;
+
+	if (!scpi_info->is_legacy)
+		cmd = ioread32(&mem->command);
+
+	scpi_process_cmd(ch, cmd);
+}
+
+static void scpi_tx_prepare(struct mbox_client *c, void *msg)
+{
+	unsigned long flags;
+	struct scpi_xfer *t = msg;
+	struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+	struct scpi_shared_mem __iomem *mem = ch->tx_payload;
+
+	if (t->tx_buf) {
+		if (scpi_info->is_legacy)
+			memcpy_toio(ch->tx_payload, t->tx_buf, t->tx_len);
+		else
+			memcpy_toio(mem->payload, t->tx_buf, t->tx_len);
+	}
+
+	if (t->rx_buf) {
+		if (!(++ch->token))
+			++ch->token;
+		t->cmd |= FIELD_PREP(CMD_TOKEN_ID_MASK, ch->token);
+		spin_lock_irqsave(&ch->rx_lock, flags);
+		list_add_tail(&t->node, &ch->rx_pending);
+		spin_unlock_irqrestore(&ch->rx_lock, flags);
+	}
+
+	if (!scpi_info->is_legacy)
+		iowrite32(t->cmd, &mem->command);
+}
+
+static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
+{
+	struct scpi_xfer *t;
+
+	mutex_lock(&ch->xfers_lock);
+	if (list_empty(&ch->xfers_list)) {
+		mutex_unlock(&ch->xfers_lock);
+		return NULL;
+	}
+	t = list_first_entry(&ch->xfers_list, struct scpi_xfer, node);
+	list_del(&t->node);
+	mutex_unlock(&ch->xfers_lock);
+	return t;
+}
+
+static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch)
+{
+	mutex_lock(&ch->xfers_lock);
+	list_add_tail(&t->node, &ch->xfers_list);
+	mutex_unlock(&ch->xfers_lock);
+}
+
+static int scpi_send_message(u8 idx, void *tx_buf, unsigned int tx_len,
+			     void *rx_buf, unsigned int rx_len)
+{
+	int ret;
+	u8 chan;
+	u8 cmd;
+	struct scpi_xfer *msg;
+	struct scpi_chan *scpi_chan;
+
+	if (scpi_info->commands[idx] < 0)
+		return -EOPNOTSUPP;
+
+	cmd = scpi_info->commands[idx];
+
+	if (scpi_info->is_legacy)
+		chan = test_bit(cmd, scpi_info->cmd_priority) ? 1 : 0;
+	else
+		chan = atomic_inc_return(&scpi_info->next_chan) %
+			scpi_info->num_chans;
+	scpi_chan = scpi_info->channels + chan;
+
+	msg = get_scpi_xfer(scpi_chan);
+	if (!msg)
+		return -ENOMEM;
+
+	if (scpi_info->is_legacy) {
+		msg->cmd = PACK_LEGACY_SCPI_CMD(cmd, tx_len);
+		msg->slot = msg->cmd;
+	} else {
+		msg->slot = BIT(SCPI_SLOT);
+		msg->cmd = PACK_SCPI_CMD(cmd, tx_len);
+	}
+	msg->tx_buf = tx_buf;
+	msg->tx_len = tx_len;
+	msg->rx_buf = rx_buf;
+	msg->rx_len = rx_len;
+	reinit_completion(&msg->done);
+
+	ret = mbox_send_message(scpi_chan->chan, msg);
+	if (ret < 0 || !rx_buf)
+		goto out;
+
+	if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT))
+		ret = -ETIMEDOUT;
+	else
+		/* first status word */
+		ret = msg->status;
+out:
+	if (ret < 0 && rx_buf) /* remove entry from the list if timed-out */
+		scpi_process_cmd(scpi_chan, msg->cmd);
+
+	put_scpi_xfer(msg, scpi_chan);
+	/* SCPI error codes > 0, translate them to Linux scale*/
+	return ret > 0 ? scpi_to_linux_errno(ret) : ret;
+}
+
+static u32 scpi_get_version(void)
+{
+	return scpi_info->protocol_version;
+}
+
+static int
+scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max)
+{
+	int ret;
+	struct clk_get_info clk;
+	__le16 le_clk_id = cpu_to_le16(clk_id);
+
+	ret = scpi_send_message(CMD_GET_CLOCK_INFO, &le_clk_id,
+				sizeof(le_clk_id), &clk, sizeof(clk));
+	if (!ret) {
+		*min = le32_to_cpu(clk.min_rate);
+		*max = le32_to_cpu(clk.max_rate);
+	}
+	return ret;
+}
+
+static unsigned long scpi_clk_get_val(u16 clk_id)
+{
+	int ret;
+	__le32 rate;
+	__le16 le_clk_id = cpu_to_le16(clk_id);
+
+	ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id,
+				sizeof(le_clk_id), &rate, sizeof(rate));
+	if (ret)
+		return 0;
+
+	return le32_to_cpu(rate);
+}
+
+static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
+{
+	int stat;
+	struct clk_set_value clk = {
+		.id = cpu_to_le16(clk_id),
+		.rate = cpu_to_le32(rate)
+	};
+
+	return scpi_send_message(CMD_SET_CLOCK_VALUE, &clk, sizeof(clk),
+				 &stat, sizeof(stat));
+}
+
+static int legacy_scpi_clk_set_val(u16 clk_id, unsigned long rate)
+{
+	int stat;
+	struct legacy_clk_set_value clk = {
+		.id = cpu_to_le16(clk_id),
+		.rate = cpu_to_le32(rate)
+	};
+
+	return scpi_send_message(CMD_SET_CLOCK_VALUE, &clk, sizeof(clk),
+				 &stat, sizeof(stat));
+}
+
+static int scpi_dvfs_get_idx(u8 domain)
+{
+	int ret;
+	u8 dvfs_idx;
+
+	ret = scpi_send_message(CMD_GET_DVFS, &domain, sizeof(domain),
+				&dvfs_idx, sizeof(dvfs_idx));
+
+	return ret ? ret : dvfs_idx;
+}
+
+static int scpi_dvfs_set_idx(u8 domain, u8 index)
+{
+	int stat;
+	struct dvfs_set dvfs = {domain, index};
+
+	return scpi_send_message(CMD_SET_DVFS, &dvfs, sizeof(dvfs),
+				 &stat, sizeof(stat));
+}
+
+static int opp_cmp_func(const void *opp1, const void *opp2)
+{
+	const struct scpi_opp *t1 = opp1, *t2 = opp2;
+
+	return t1->freq - t2->freq;
+}
+
+static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
+{
+	struct scpi_dvfs_info *info;
+	struct scpi_opp *opp;
+	struct dvfs_info buf;
+	int ret, i;
+
+	if (domain >= MAX_DVFS_DOMAINS)
+		return ERR_PTR(-EINVAL);
+
+	if (scpi_info->dvfs[domain])	/* data already populated */
+		return scpi_info->dvfs[domain];
+
+	ret = scpi_send_message(CMD_GET_DVFS_INFO, &domain, sizeof(domain),
+				&buf, sizeof(buf));
+	if (ret)
+		return ERR_PTR(ret);
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+
+	info->count = buf.opp_count;
+	info->latency = le16_to_cpu(buf.latency) * 1000; /* uS to nS */
+
+	info->opps = kcalloc(info->count, sizeof(*opp), GFP_KERNEL);
+	if (!info->opps) {
+		kfree(info);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	for (i = 0, opp = info->opps; i < info->count; i++, opp++) {
+		opp->freq = le32_to_cpu(buf.opps[i].freq);
+		opp->m_volt = le32_to_cpu(buf.opps[i].m_volt);
+	}
+
+	sort(info->opps, info->count, sizeof(*opp), opp_cmp_func, NULL);
+
+	scpi_info->dvfs[domain] = info;
+	return info;
+}
+
+static int scpi_dev_domain_id(struct device *dev)
+{
+	struct of_phandle_args clkspec;
+
+	if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells",
+				       0, &clkspec))
+		return -EINVAL;
+
+	return clkspec.args[0];
+}
+
+static struct scpi_dvfs_info *scpi_dvfs_info(struct device *dev)
+{
+	int domain = scpi_dev_domain_id(dev);
+
+	if (domain < 0)
+		return ERR_PTR(domain);
+
+	return scpi_dvfs_get_info(domain);
+}
+
+static int scpi_dvfs_get_transition_latency(struct device *dev)
+{
+	struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	return info->latency;
+}
+
+static int scpi_dvfs_add_opps_to_device(struct device *dev)
+{
+	int idx, ret;
+	struct scpi_opp *opp;
+	struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	if (!info->opps)
+		return -EIO;
+
+	for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
+		ret = dev_pm_opp_add(dev, opp->freq, opp->m_volt * 1000);
+		if (ret) {
+			dev_warn(dev, "failed to add opp %uHz %umV\n",
+				 opp->freq, opp->m_volt);
+			while (idx-- > 0)
+				dev_pm_opp_remove(dev, (--opp)->freq);
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int scpi_sensor_get_capability(u16 *sensors)
+{
+	__le16 cap;
+	int ret;
+
+	ret = scpi_send_message(CMD_SENSOR_CAPABILITIES, NULL, 0, &cap,
+				sizeof(cap));
+	if (!ret)
+		*sensors = le16_to_cpu(cap);
+
+	return ret;
+}
+
+static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
+{
+	__le16 id = cpu_to_le16(sensor_id);
+	struct _scpi_sensor_info _info;
+	int ret;
+
+	ret = scpi_send_message(CMD_SENSOR_INFO, &id, sizeof(id),
+				&_info, sizeof(_info));
+	if (!ret) {
+		memcpy(info, &_info, sizeof(*info));
+		info->sensor_id = le16_to_cpu(_info.sensor_id);
+	}
+
+	return ret;
+}
+
+static int scpi_sensor_get_value(u16 sensor, u64 *val)
+{
+	__le16 id = cpu_to_le16(sensor);
+	__le64 value;
+	int ret;
+
+	ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
+				&value, sizeof(value));
+	if (ret)
+		return ret;
+
+	if (scpi_info->is_legacy)
+		/* only 32-bits supported, upper 32 bits can be junk */
+		*val = le32_to_cpup((__le32 *)&value);
+	else
+		*val = le64_to_cpu(value);
+
+	return 0;
+}
+
+static int scpi_device_get_power_state(u16 dev_id)
+{
+	int ret;
+	u8 pstate;
+	__le16 id = cpu_to_le16(dev_id);
+
+	ret = scpi_send_message(CMD_GET_DEVICE_PWR_STATE, &id,
+				sizeof(id), &pstate, sizeof(pstate));
+	return ret ? ret : pstate;
+}
+
+static int scpi_device_set_power_state(u16 dev_id, u8 pstate)
+{
+	int stat;
+	struct dev_pstate_set dev_set = {
+		.dev_id = cpu_to_le16(dev_id),
+		.pstate = pstate,
+	};
+
+	return scpi_send_message(CMD_SET_DEVICE_PWR_STATE, &dev_set,
+				 sizeof(dev_set), &stat, sizeof(stat));
+}
+
+static struct scpi_ops scpi_ops = {
+	.get_version = scpi_get_version,
+	.clk_get_range = scpi_clk_get_range,
+	.clk_get_val = scpi_clk_get_val,
+	.clk_set_val = scpi_clk_set_val,
+	.dvfs_get_idx = scpi_dvfs_get_idx,
+	.dvfs_set_idx = scpi_dvfs_set_idx,
+	.dvfs_get_info = scpi_dvfs_get_info,
+	.device_domain_id = scpi_dev_domain_id,
+	.get_transition_latency = scpi_dvfs_get_transition_latency,
+	.add_opps_to_device = scpi_dvfs_add_opps_to_device,
+	.sensor_get_capability = scpi_sensor_get_capability,
+	.sensor_get_info = scpi_sensor_get_info,
+	.sensor_get_value = scpi_sensor_get_value,
+	.device_get_power_state = scpi_device_get_power_state,
+	.device_set_power_state = scpi_device_set_power_state,
+};
+
+struct scpi_ops *get_scpi_ops(void)
+{
+	return scpi_info ? scpi_info->scpi_ops : NULL;
+}
+EXPORT_SYMBOL_GPL(get_scpi_ops);
+
+static int scpi_init_versions(struct scpi_drvinfo *info)
+{
+	int ret;
+	struct scp_capabilities caps;
+
+	ret = scpi_send_message(CMD_SCPI_CAPABILITIES, NULL, 0,
+				&caps, sizeof(caps));
+	if (!ret) {
+		info->protocol_version = le32_to_cpu(caps.protocol_version);
+		info->firmware_version = le32_to_cpu(caps.platform_version);
+	}
+	/* Ignore error if not implemented */
+	if (info->is_legacy && ret == -EOPNOTSUPP)
+		return 0;
+
+	return ret;
+}
+
+static ssize_t protocol_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%lu.%lu\n",
+		FIELD_GET(PROTO_REV_MAJOR_MASK, scpi_info->protocol_version),
+		FIELD_GET(PROTO_REV_MINOR_MASK, scpi_info->protocol_version));
+}
+static DEVICE_ATTR_RO(protocol_version);
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%lu.%lu.%lu\n",
+		FIELD_GET(FW_REV_MAJOR_MASK, scpi_info->firmware_version),
+		FIELD_GET(FW_REV_MINOR_MASK, scpi_info->firmware_version),
+		FIELD_GET(FW_REV_PATCH_MASK, scpi_info->firmware_version));
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static struct attribute *versions_attrs[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_protocol_version.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(versions);
+
+static void scpi_free_channels(void *data)
+{
+	struct scpi_drvinfo *info = data;
+	int i;
+
+	for (i = 0; i < info->num_chans; i++)
+		mbox_free_channel(info->channels[i].chan);
+}
+
+static int scpi_remove(struct platform_device *pdev)
+{
+	int i;
+	struct scpi_drvinfo *info = platform_get_drvdata(pdev);
+
+	scpi_info = NULL; /* stop exporting SCPI ops through get_scpi_ops */
+
+	for (i = 0; i < MAX_DVFS_DOMAINS && info->dvfs[i]; i++) {
+		kfree(info->dvfs[i]->opps);
+		kfree(info->dvfs[i]);
+	}
+
+	return 0;
+}
+
+#define MAX_SCPI_XFERS		10
+static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
+{
+	int i;
+	struct scpi_xfer *xfers;
+
+	xfers = devm_kcalloc(dev, MAX_SCPI_XFERS, sizeof(*xfers), GFP_KERNEL);
+	if (!xfers)
+		return -ENOMEM;
+
+	ch->xfers = xfers;
+	for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++) {
+		init_completion(&xfers->done);
+		list_add_tail(&xfers->node, &ch->xfers_list);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id legacy_scpi_of_match[] = {
+	{.compatible = "arm,scpi-pre-1.0"},
+	{},
+};
+
+static int scpi_probe(struct platform_device *pdev)
+{
+	int count, idx, ret;
+	struct resource res;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct scpi_drvinfo *scpi_drvinfo;
+
+	scpi_drvinfo = devm_kzalloc(dev, sizeof(*scpi_drvinfo), GFP_KERNEL);
+	if (!scpi_drvinfo)
+		return -ENOMEM;
+
+	if (of_match_device(legacy_scpi_of_match, &pdev->dev))
+		scpi_drvinfo->is_legacy = true;
+
+	count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+	if (count < 0) {
+		dev_err(dev, "no mboxes property in '%pOF'\n", np);
+		return -ENODEV;
+	}
+
+	scpi_drvinfo->channels =
+		devm_kcalloc(dev, count, sizeof(struct scpi_chan), GFP_KERNEL);
+	if (!scpi_drvinfo->channels)
+		return -ENOMEM;
+
+	ret = devm_add_action(dev, scpi_free_channels, scpi_drvinfo);
+	if (ret)
+		return ret;
+
+	for (; scpi_drvinfo->num_chans < count; scpi_drvinfo->num_chans++) {
+		resource_size_t size;
+		int idx = scpi_drvinfo->num_chans;
+		struct scpi_chan *pchan = scpi_drvinfo->channels + idx;
+		struct mbox_client *cl = &pchan->cl;
+		struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
+
+		ret = of_address_to_resource(shmem, 0, &res);
+		of_node_put(shmem);
+		if (ret) {
+			dev_err(dev, "failed to get SCPI payload mem resource\n");
+			return ret;
+		}
+
+		size = resource_size(&res);
+		pchan->rx_payload = devm_ioremap(dev, res.start, size);
+		if (!pchan->rx_payload) {
+			dev_err(dev, "failed to ioremap SCPI payload\n");
+			return -EADDRNOTAVAIL;
+		}
+		pchan->tx_payload = pchan->rx_payload + (size >> 1);
+
+		cl->dev = dev;
+		cl->rx_callback = scpi_handle_remote_msg;
+		cl->tx_prepare = scpi_tx_prepare;
+		cl->tx_block = true;
+		cl->tx_tout = 20;
+		cl->knows_txdone = false; /* controller can't ack */
+
+		INIT_LIST_HEAD(&pchan->rx_pending);
+		INIT_LIST_HEAD(&pchan->xfers_list);
+		spin_lock_init(&pchan->rx_lock);
+		mutex_init(&pchan->xfers_lock);
+
+		ret = scpi_alloc_xfer_list(dev, pchan);
+		if (!ret) {
+			pchan->chan = mbox_request_channel(cl, idx);
+			if (!IS_ERR(pchan->chan))
+				continue;
+			ret = PTR_ERR(pchan->chan);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to get channel%d err %d\n",
+					idx, ret);
+		}
+		return ret;
+	}
+
+	scpi_drvinfo->commands = scpi_std_commands;
+
+	platform_set_drvdata(pdev, scpi_drvinfo);
+
+	if (scpi_drvinfo->is_legacy) {
+		/* Replace with legacy variants */
+		scpi_ops.clk_set_val = legacy_scpi_clk_set_val;
+		scpi_drvinfo->commands = scpi_legacy_commands;
+
+		/* Fill priority bitmap */
+		for (idx = 0; idx < ARRAY_SIZE(legacy_hpriority_cmds); idx++)
+			set_bit(legacy_hpriority_cmds[idx],
+				scpi_drvinfo->cmd_priority);
+	}
+
+	scpi_info = scpi_drvinfo;
+
+	ret = scpi_init_versions(scpi_drvinfo);
+	if (ret) {
+		dev_err(dev, "incorrect or no SCP firmware found\n");
+		scpi_info = NULL;
+		return ret;
+	}
+
+	if (scpi_drvinfo->is_legacy && !scpi_drvinfo->protocol_version &&
+	    !scpi_drvinfo->firmware_version)
+		dev_info(dev, "SCP Protocol legacy pre-1.0 firmware\n");
+	else
+		dev_info(dev, "SCP Protocol %lu.%lu Firmware %lu.%lu.%lu version\n",
+			 FIELD_GET(PROTO_REV_MAJOR_MASK,
+				   scpi_drvinfo->protocol_version),
+			 FIELD_GET(PROTO_REV_MINOR_MASK,
+				   scpi_drvinfo->protocol_version),
+			 FIELD_GET(FW_REV_MAJOR_MASK,
+				   scpi_drvinfo->firmware_version),
+			 FIELD_GET(FW_REV_MINOR_MASK,
+				   scpi_drvinfo->firmware_version),
+			 FIELD_GET(FW_REV_PATCH_MASK,
+				   scpi_drvinfo->firmware_version));
+
+	scpi_drvinfo->scpi_ops = &scpi_ops;
+
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		scpi_info = NULL;
+
+	return ret;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+	{.compatible = "arm,scpi"},
+	{.compatible = "arm,scpi-pre-1.0"},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, scpi_of_match);
+
+static struct platform_driver scpi_driver = {
+	.driver = {
+		.name = "scpi_protocol",
+		.of_match_table = scpi_of_match,
+		.dev_groups = versions_groups,
+	},
+	.probe = scpi_probe,
+	.remove = scpi_remove,
+};
+module_platform_driver(scpi_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI mailbox protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c
new file mode 100644
index 000000000..68e55ca74
--- /dev/null
+++ b/drivers/firmware/arm_sdei.c
@@ -0,0 +1,1130 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2017 Arm Ltd.
+#define pr_fmt(fmt) "sdei: " fmt
+
+#include <acpi/ghes.h>
+#include <linux/acpi.h>
+#include <linux/arm_sdei.h>
+#include <linux/arm-smccc.h>
+#include <linux/atomic.h>
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/cpuhotplug.h>
+#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/kvm_host.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/percpu.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/ptrace.h>
+#include <linux/preempt.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+/*
+ * The call to use to reach the firmware.
+ */
+static asmlinkage void (*sdei_firmware_call)(unsigned long function_id,
+		      unsigned long arg0, unsigned long arg1,
+		      unsigned long arg2, unsigned long arg3,
+		      unsigned long arg4, struct arm_smccc_res *res);
+
+/* entry point from firmware to arch asm code */
+static unsigned long sdei_entry_point;
+
+static int sdei_hp_state;
+
+struct sdei_event {
+	/* These three are protected by the sdei_list_lock */
+	struct list_head	list;
+	bool			reregister;
+	bool			reenable;
+
+	u32			event_num;
+	u8			type;
+	u8			priority;
+
+	/* This pointer is handed to firmware as the event argument. */
+	union {
+		/* Shared events */
+		struct sdei_registered_event *registered;
+
+		/* CPU private events */
+		struct sdei_registered_event __percpu *private_registered;
+	};
+};
+
+/* Take the mutex for any API call or modification. Take the mutex first. */
+static DEFINE_MUTEX(sdei_events_lock);
+
+/* and then hold this when modifying the list */
+static DEFINE_SPINLOCK(sdei_list_lock);
+static LIST_HEAD(sdei_list);
+
+/* Private events are registered/enabled via IPI passing one of these */
+struct sdei_crosscall_args {
+	struct sdei_event *event;
+	atomic_t errors;
+	int first_error;
+};
+
+#define CROSSCALL_INIT(arg, event)		\
+	do {					\
+		arg.event = event;		\
+		arg.first_error = 0;		\
+		atomic_set(&arg.errors, 0);	\
+	} while (0)
+
+static inline int sdei_do_local_call(smp_call_func_t fn,
+				     struct sdei_event *event)
+{
+	struct sdei_crosscall_args arg;
+
+	CROSSCALL_INIT(arg, event);
+	fn(&arg);
+
+	return arg.first_error;
+}
+
+static inline int sdei_do_cross_call(smp_call_func_t fn,
+				     struct sdei_event *event)
+{
+	struct sdei_crosscall_args arg;
+
+	CROSSCALL_INIT(arg, event);
+	on_each_cpu(fn, &arg, true);
+
+	return arg.first_error;
+}
+
+static inline void
+sdei_cross_call_return(struct sdei_crosscall_args *arg, int err)
+{
+	if (err && (atomic_inc_return(&arg->errors) == 1))
+		arg->first_error = err;
+}
+
+static int sdei_to_linux_errno(unsigned long sdei_err)
+{
+	switch (sdei_err) {
+	case SDEI_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	case SDEI_INVALID_PARAMETERS:
+		return -EINVAL;
+	case SDEI_DENIED:
+		return -EPERM;
+	case SDEI_PENDING:
+		return -EINPROGRESS;
+	case SDEI_OUT_OF_RESOURCE:
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int invoke_sdei_fn(unsigned long function_id, unsigned long arg0,
+			  unsigned long arg1, unsigned long arg2,
+			  unsigned long arg3, unsigned long arg4,
+			  u64 *result)
+{
+	int err;
+	struct arm_smccc_res res;
+
+	if (sdei_firmware_call) {
+		sdei_firmware_call(function_id, arg0, arg1, arg2, arg3, arg4,
+				   &res);
+		err = sdei_to_linux_errno(res.a0);
+	} else {
+		/*
+		 * !sdei_firmware_call means we failed to probe or called
+		 * sdei_mark_interface_broken(). -EIO is not an error returned
+		 * by sdei_to_linux_errno() and is used to suppress messages
+		 * from this driver.
+		 */
+		err = -EIO;
+		res.a0 = SDEI_NOT_SUPPORTED;
+	}
+
+	if (result)
+		*result = res.a0;
+
+	return err;
+}
+NOKPROBE_SYMBOL(invoke_sdei_fn);
+
+static struct sdei_event *sdei_event_find(u32 event_num)
+{
+	struct sdei_event *e, *found = NULL;
+
+	lockdep_assert_held(&sdei_events_lock);
+
+	spin_lock(&sdei_list_lock);
+	list_for_each_entry(e, &sdei_list, list) {
+		if (e->event_num == event_num) {
+			found = e;
+			break;
+		}
+	}
+	spin_unlock(&sdei_list_lock);
+
+	return found;
+}
+
+int sdei_api_event_context(u32 query, u64 *result)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_CONTEXT, query, 0, 0, 0, 0,
+			      result);
+}
+NOKPROBE_SYMBOL(sdei_api_event_context);
+
+static int sdei_api_event_get_info(u32 event, u32 info, u64 *result)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_GET_INFO, event, info, 0,
+			      0, 0, result);
+}
+
+static struct sdei_event *sdei_event_create(u32 event_num,
+					    sdei_event_callback *cb,
+					    void *cb_arg)
+{
+	int err;
+	u64 result;
+	struct sdei_event *event;
+	struct sdei_registered_event *reg;
+
+	lockdep_assert_held(&sdei_events_lock);
+
+	event = kzalloc(sizeof(*event), GFP_KERNEL);
+	if (!event) {
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	INIT_LIST_HEAD(&event->list);
+	event->event_num = event_num;
+
+	err = sdei_api_event_get_info(event_num, SDEI_EVENT_INFO_EV_PRIORITY,
+				      &result);
+	if (err)
+		goto fail;
+	event->priority = result;
+
+	err = sdei_api_event_get_info(event_num, SDEI_EVENT_INFO_EV_TYPE,
+				      &result);
+	if (err)
+		goto fail;
+	event->type = result;
+
+	if (event->type == SDEI_EVENT_TYPE_SHARED) {
+		reg = kzalloc(sizeof(*reg), GFP_KERNEL);
+		if (!reg) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		reg->event_num = event->event_num;
+		reg->priority = event->priority;
+
+		reg->callback = cb;
+		reg->callback_arg = cb_arg;
+		event->registered = reg;
+	} else {
+		int cpu;
+		struct sdei_registered_event __percpu *regs;
+
+		regs = alloc_percpu(struct sdei_registered_event);
+		if (!regs) {
+			err = -ENOMEM;
+			goto fail;
+		}
+
+		for_each_possible_cpu(cpu) {
+			reg = per_cpu_ptr(regs, cpu);
+
+			reg->event_num = event->event_num;
+			reg->priority = event->priority;
+			reg->callback = cb;
+			reg->callback_arg = cb_arg;
+		}
+
+		event->private_registered = regs;
+	}
+
+	spin_lock(&sdei_list_lock);
+	list_add(&event->list, &sdei_list);
+	spin_unlock(&sdei_list_lock);
+
+	return event;
+
+fail:
+	kfree(event);
+	return ERR_PTR(err);
+}
+
+static void sdei_event_destroy_llocked(struct sdei_event *event)
+{
+	lockdep_assert_held(&sdei_events_lock);
+	lockdep_assert_held(&sdei_list_lock);
+
+	list_del(&event->list);
+
+	if (event->type == SDEI_EVENT_TYPE_SHARED)
+		kfree(event->registered);
+	else
+		free_percpu(event->private_registered);
+
+	kfree(event);
+}
+
+static void sdei_event_destroy(struct sdei_event *event)
+{
+	spin_lock(&sdei_list_lock);
+	sdei_event_destroy_llocked(event);
+	spin_unlock(&sdei_list_lock);
+}
+
+static int sdei_api_get_version(u64 *version)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_VERSION, 0, 0, 0, 0, 0, version);
+}
+
+int sdei_mask_local_cpu(void)
+{
+	int err;
+
+	err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_MASK, 0, 0, 0, 0, 0, NULL);
+	if (err && err != -EIO) {
+		pr_warn_once("failed to mask CPU[%u]: %d\n",
+			      smp_processor_id(), err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void _ipi_mask_cpu(void *ignored)
+{
+	WARN_ON_ONCE(preemptible());
+	sdei_mask_local_cpu();
+}
+
+int sdei_unmask_local_cpu(void)
+{
+	int err;
+
+	err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_UNMASK, 0, 0, 0, 0, 0, NULL);
+	if (err && err != -EIO) {
+		pr_warn_once("failed to unmask CPU[%u]: %d\n",
+			     smp_processor_id(), err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void _ipi_unmask_cpu(void *ignored)
+{
+	WARN_ON_ONCE(preemptible());
+	sdei_unmask_local_cpu();
+}
+
+static void _ipi_private_reset(void *ignored)
+{
+	int err;
+
+	WARN_ON_ONCE(preemptible());
+
+	err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PRIVATE_RESET, 0, 0, 0, 0, 0,
+			     NULL);
+	if (err && err != -EIO)
+		pr_warn_once("failed to reset CPU[%u]: %d\n",
+			     smp_processor_id(), err);
+}
+
+static int sdei_api_shared_reset(void)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_SHARED_RESET, 0, 0, 0, 0, 0,
+			      NULL);
+}
+
+static void sdei_mark_interface_broken(void)
+{
+	pr_err("disabling SDEI firmware interface\n");
+	on_each_cpu(&_ipi_mask_cpu, NULL, true);
+	sdei_firmware_call = NULL;
+}
+
+static int sdei_platform_reset(void)
+{
+	int err;
+
+	on_each_cpu(&_ipi_private_reset, NULL, true);
+	err = sdei_api_shared_reset();
+	if (err) {
+		pr_err("Failed to reset platform: %d\n", err);
+		sdei_mark_interface_broken();
+	}
+
+	return err;
+}
+
+static int sdei_api_event_enable(u32 event_num)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_ENABLE, event_num, 0, 0, 0,
+			      0, NULL);
+}
+
+/* Called directly by the hotplug callbacks */
+static void _local_event_enable(void *data)
+{
+	int err;
+	struct sdei_crosscall_args *arg = data;
+
+	err = sdei_api_event_enable(arg->event->event_num);
+
+	sdei_cross_call_return(arg, err);
+}
+
+int sdei_event_enable(u32 event_num)
+{
+	int err = -EINVAL;
+	struct sdei_event *event;
+
+	mutex_lock(&sdei_events_lock);
+	event = sdei_event_find(event_num);
+	if (!event) {
+		mutex_unlock(&sdei_events_lock);
+		return -ENOENT;
+	}
+
+
+	cpus_read_lock();
+	if (event->type == SDEI_EVENT_TYPE_SHARED)
+		err = sdei_api_event_enable(event->event_num);
+	else
+		err = sdei_do_cross_call(_local_event_enable, event);
+
+	if (!err) {
+		spin_lock(&sdei_list_lock);
+		event->reenable = true;
+		spin_unlock(&sdei_list_lock);
+	}
+	cpus_read_unlock();
+	mutex_unlock(&sdei_events_lock);
+
+	return err;
+}
+
+static int sdei_api_event_disable(u32 event_num)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_DISABLE, event_num, 0, 0,
+			      0, 0, NULL);
+}
+
+static void _ipi_event_disable(void *data)
+{
+	int err;
+	struct sdei_crosscall_args *arg = data;
+
+	err = sdei_api_event_disable(arg->event->event_num);
+
+	sdei_cross_call_return(arg, err);
+}
+
+int sdei_event_disable(u32 event_num)
+{
+	int err = -EINVAL;
+	struct sdei_event *event;
+
+	mutex_lock(&sdei_events_lock);
+	event = sdei_event_find(event_num);
+	if (!event) {
+		mutex_unlock(&sdei_events_lock);
+		return -ENOENT;
+	}
+
+	spin_lock(&sdei_list_lock);
+	event->reenable = false;
+	spin_unlock(&sdei_list_lock);
+
+	if (event->type == SDEI_EVENT_TYPE_SHARED)
+		err = sdei_api_event_disable(event->event_num);
+	else
+		err = sdei_do_cross_call(_ipi_event_disable, event);
+	mutex_unlock(&sdei_events_lock);
+
+	return err;
+}
+
+static int sdei_api_event_unregister(u32 event_num)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_UNREGISTER, event_num, 0,
+			      0, 0, 0, NULL);
+}
+
+/* Called directly by the hotplug callbacks */
+static void _local_event_unregister(void *data)
+{
+	int err;
+	struct sdei_crosscall_args *arg = data;
+
+	err = sdei_api_event_unregister(arg->event->event_num);
+
+	sdei_cross_call_return(arg, err);
+}
+
+int sdei_event_unregister(u32 event_num)
+{
+	int err;
+	struct sdei_event *event;
+
+	WARN_ON(in_nmi());
+
+	mutex_lock(&sdei_events_lock);
+	event = sdei_event_find(event_num);
+	if (!event) {
+		pr_warn("Event %u not registered\n", event_num);
+		err = -ENOENT;
+		goto unlock;
+	}
+
+	spin_lock(&sdei_list_lock);
+	event->reregister = false;
+	event->reenable = false;
+	spin_unlock(&sdei_list_lock);
+
+	if (event->type == SDEI_EVENT_TYPE_SHARED)
+		err = sdei_api_event_unregister(event->event_num);
+	else
+		err = sdei_do_cross_call(_local_event_unregister, event);
+
+	if (err)
+		goto unlock;
+
+	sdei_event_destroy(event);
+unlock:
+	mutex_unlock(&sdei_events_lock);
+
+	return err;
+}
+
+/*
+ * unregister events, but don't destroy them as they are re-registered by
+ * sdei_reregister_shared().
+ */
+static int sdei_unregister_shared(void)
+{
+	int err = 0;
+	struct sdei_event *event;
+
+	mutex_lock(&sdei_events_lock);
+	spin_lock(&sdei_list_lock);
+	list_for_each_entry(event, &sdei_list, list) {
+		if (event->type != SDEI_EVENT_TYPE_SHARED)
+			continue;
+
+		err = sdei_api_event_unregister(event->event_num);
+		if (err)
+			break;
+	}
+	spin_unlock(&sdei_list_lock);
+	mutex_unlock(&sdei_events_lock);
+
+	return err;
+}
+
+static int sdei_api_event_register(u32 event_num, unsigned long entry_point,
+				   void *arg, u64 flags, u64 affinity)
+{
+	return invoke_sdei_fn(SDEI_1_0_FN_SDEI_EVENT_REGISTER, event_num,
+			      (unsigned long)entry_point, (unsigned long)arg,
+			      flags, affinity, NULL);
+}
+
+/* Called directly by the hotplug callbacks */
+static void _local_event_register(void *data)
+{
+	int err;
+	struct sdei_registered_event *reg;
+	struct sdei_crosscall_args *arg = data;
+
+	reg = per_cpu_ptr(arg->event->private_registered, smp_processor_id());
+	err = sdei_api_event_register(arg->event->event_num, sdei_entry_point,
+				      reg, 0, 0);
+
+	sdei_cross_call_return(arg, err);
+}
+
+int sdei_event_register(u32 event_num, sdei_event_callback *cb, void *arg)
+{
+	int err;
+	struct sdei_event *event;
+
+	WARN_ON(in_nmi());
+
+	mutex_lock(&sdei_events_lock);
+	if (sdei_event_find(event_num)) {
+		pr_warn("Event %u already registered\n", event_num);
+		err = -EBUSY;
+		goto unlock;
+	}
+
+	event = sdei_event_create(event_num, cb, arg);
+	if (IS_ERR(event)) {
+		err = PTR_ERR(event);
+		pr_warn("Failed to create event %u: %d\n", event_num, err);
+		goto unlock;
+	}
+
+	cpus_read_lock();
+	if (event->type == SDEI_EVENT_TYPE_SHARED) {
+		err = sdei_api_event_register(event->event_num,
+					      sdei_entry_point,
+					      event->registered,
+					      SDEI_EVENT_REGISTER_RM_ANY, 0);
+	} else {
+		err = sdei_do_cross_call(_local_event_register, event);
+		if (err)
+			sdei_do_cross_call(_local_event_unregister, event);
+	}
+
+	if (err) {
+		sdei_event_destroy(event);
+		pr_warn("Failed to register event %u: %d\n", event_num, err);
+		goto cpu_unlock;
+	}
+
+	spin_lock(&sdei_list_lock);
+	event->reregister = true;
+	spin_unlock(&sdei_list_lock);
+cpu_unlock:
+	cpus_read_unlock();
+unlock:
+	mutex_unlock(&sdei_events_lock);
+	return err;
+}
+
+static int sdei_reregister_shared(void)
+{
+	int err = 0;
+	struct sdei_event *event;
+
+	mutex_lock(&sdei_events_lock);
+	spin_lock(&sdei_list_lock);
+	list_for_each_entry(event, &sdei_list, list) {
+		if (event->type != SDEI_EVENT_TYPE_SHARED)
+			continue;
+
+		if (event->reregister) {
+			err = sdei_api_event_register(event->event_num,
+					sdei_entry_point, event->registered,
+					SDEI_EVENT_REGISTER_RM_ANY, 0);
+			if (err) {
+				pr_err("Failed to re-register event %u\n",
+				       event->event_num);
+				sdei_event_destroy_llocked(event);
+				break;
+			}
+		}
+
+		if (event->reenable) {
+			err = sdei_api_event_enable(event->event_num);
+			if (err) {
+				pr_err("Failed to re-enable event %u\n",
+				       event->event_num);
+				break;
+			}
+		}
+	}
+	spin_unlock(&sdei_list_lock);
+	mutex_unlock(&sdei_events_lock);
+
+	return err;
+}
+
+static int sdei_cpuhp_down(unsigned int cpu)
+{
+	struct sdei_event *event;
+	int err;
+
+	/* un-register private events */
+	spin_lock(&sdei_list_lock);
+	list_for_each_entry(event, &sdei_list, list) {
+		if (event->type == SDEI_EVENT_TYPE_SHARED)
+			continue;
+
+		err = sdei_do_local_call(_local_event_unregister, event);
+		if (err) {
+			pr_err("Failed to unregister event %u: %d\n",
+			       event->event_num, err);
+		}
+	}
+	spin_unlock(&sdei_list_lock);
+
+	return sdei_mask_local_cpu();
+}
+
+static int sdei_cpuhp_up(unsigned int cpu)
+{
+	struct sdei_event *event;
+	int err;
+
+	/* re-register/enable private events */
+	spin_lock(&sdei_list_lock);
+	list_for_each_entry(event, &sdei_list, list) {
+		if (event->type == SDEI_EVENT_TYPE_SHARED)
+			continue;
+
+		if (event->reregister) {
+			err = sdei_do_local_call(_local_event_register, event);
+			if (err) {
+				pr_err("Failed to re-register event %u: %d\n",
+				       event->event_num, err);
+			}
+		}
+
+		if (event->reenable) {
+			err = sdei_do_local_call(_local_event_enable, event);
+			if (err) {
+				pr_err("Failed to re-enable event %u: %d\n",
+				       event->event_num, err);
+			}
+		}
+	}
+	spin_unlock(&sdei_list_lock);
+
+	return sdei_unmask_local_cpu();
+}
+
+/* When entering idle, mask/unmask events for this cpu */
+static int sdei_pm_notifier(struct notifier_block *nb, unsigned long action,
+			    void *data)
+{
+	int rv;
+
+	WARN_ON_ONCE(preemptible());
+
+	switch (action) {
+	case CPU_PM_ENTER:
+		rv = sdei_mask_local_cpu();
+		break;
+	case CPU_PM_EXIT:
+	case CPU_PM_ENTER_FAILED:
+		rv = sdei_unmask_local_cpu();
+		break;
+	default:
+		return NOTIFY_DONE;
+	}
+
+	if (rv)
+		return notifier_from_errno(rv);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sdei_pm_nb = {
+	.notifier_call = sdei_pm_notifier,
+};
+
+static int sdei_device_suspend(struct device *dev)
+{
+	on_each_cpu(_ipi_mask_cpu, NULL, true);
+
+	return 0;
+}
+
+static int sdei_device_resume(struct device *dev)
+{
+	on_each_cpu(_ipi_unmask_cpu, NULL, true);
+
+	return 0;
+}
+
+/*
+ * We need all events to be reregistered when we resume from hibernate.
+ *
+ * The sequence is freeze->thaw. Reboot. freeze->restore. We unregister
+ * events during freeze, then re-register and re-enable them during thaw
+ * and restore.
+ */
+static int sdei_device_freeze(struct device *dev)
+{
+	int err;
+
+	/* unregister private events */
+	cpuhp_remove_state(sdei_entry_point);
+
+	err = sdei_unregister_shared();
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int sdei_device_thaw(struct device *dev)
+{
+	int err;
+
+	/* re-register shared events */
+	err = sdei_reregister_shared();
+	if (err) {
+		pr_warn("Failed to re-register shared events...\n");
+		sdei_mark_interface_broken();
+		return err;
+	}
+
+	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI",
+				&sdei_cpuhp_up, &sdei_cpuhp_down);
+	if (err < 0) {
+		pr_warn("Failed to re-register CPU hotplug notifier...\n");
+		return err;
+	}
+
+	sdei_hp_state = err;
+	return 0;
+}
+
+static int sdei_device_restore(struct device *dev)
+{
+	int err;
+
+	err = sdei_platform_reset();
+	if (err)
+		return err;
+
+	return sdei_device_thaw(dev);
+}
+
+static const struct dev_pm_ops sdei_pm_ops = {
+	.suspend = sdei_device_suspend,
+	.resume = sdei_device_resume,
+	.freeze = sdei_device_freeze,
+	.thaw = sdei_device_thaw,
+	.restore = sdei_device_restore,
+};
+
+/*
+ * Mask all CPUs and unregister all events on panic, reboot or kexec.
+ */
+static int sdei_reboot_notifier(struct notifier_block *nb, unsigned long action,
+				void *data)
+{
+	/*
+	 * We are going to reset the interface, after this there is no point
+	 * doing work when we take CPUs offline.
+	 */
+	cpuhp_remove_state(sdei_hp_state);
+
+	sdei_platform_reset();
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sdei_reboot_nb = {
+	.notifier_call = sdei_reboot_notifier,
+};
+
+static void sdei_smccc_smc(unsigned long function_id,
+			   unsigned long arg0, unsigned long arg1,
+			   unsigned long arg2, unsigned long arg3,
+			   unsigned long arg4, struct arm_smccc_res *res)
+{
+	arm_smccc_smc(function_id, arg0, arg1, arg2, arg3, arg4, 0, 0, res);
+}
+NOKPROBE_SYMBOL(sdei_smccc_smc);
+
+static void sdei_smccc_hvc(unsigned long function_id,
+			   unsigned long arg0, unsigned long arg1,
+			   unsigned long arg2, unsigned long arg3,
+			   unsigned long arg4, struct arm_smccc_res *res)
+{
+	arm_smccc_hvc(function_id, arg0, arg1, arg2, arg3, arg4, 0, 0, res);
+}
+NOKPROBE_SYMBOL(sdei_smccc_hvc);
+
+int sdei_register_ghes(struct ghes *ghes, sdei_event_callback *normal_cb,
+		       sdei_event_callback *critical_cb)
+{
+	int err;
+	u64 result;
+	u32 event_num;
+	sdei_event_callback *cb;
+
+	if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES))
+		return -EOPNOTSUPP;
+
+	event_num = ghes->generic->notify.vector;
+	if (event_num == 0) {
+		/*
+		 * Event 0 is reserved by the specification for
+		 * SDEI_EVENT_SIGNAL.
+		 */
+		return -EINVAL;
+	}
+
+	err = sdei_api_event_get_info(event_num, SDEI_EVENT_INFO_EV_PRIORITY,
+				      &result);
+	if (err)
+		return err;
+
+	if (result == SDEI_EVENT_PRIORITY_CRITICAL)
+		cb = critical_cb;
+	else
+		cb = normal_cb;
+
+	err = sdei_event_register(event_num, cb, ghes);
+	if (!err)
+		err = sdei_event_enable(event_num);
+
+	return err;
+}
+
+int sdei_unregister_ghes(struct ghes *ghes)
+{
+	int i;
+	int err;
+	u32 event_num = ghes->generic->notify.vector;
+
+	might_sleep();
+
+	if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES))
+		return -EOPNOTSUPP;
+
+	/*
+	 * The event may be running on another CPU. Disable it
+	 * to stop new events, then try to unregister a few times.
+	 */
+	err = sdei_event_disable(event_num);
+	if (err)
+		return err;
+
+	for (i = 0; i < 3; i++) {
+		err = sdei_event_unregister(event_num);
+		if (err != -EINPROGRESS)
+			break;
+
+		schedule();
+	}
+
+	return err;
+}
+
+static int sdei_get_conduit(struct platform_device *pdev)
+{
+	const char *method;
+	struct device_node *np = pdev->dev.of_node;
+
+	sdei_firmware_call = NULL;
+	if (np) {
+		if (of_property_read_string(np, "method", &method)) {
+			pr_warn("missing \"method\" property\n");
+			return SMCCC_CONDUIT_NONE;
+		}
+
+		if (!strcmp("hvc", method)) {
+			sdei_firmware_call = &sdei_smccc_hvc;
+			return SMCCC_CONDUIT_HVC;
+		} else if (!strcmp("smc", method)) {
+			sdei_firmware_call = &sdei_smccc_smc;
+			return SMCCC_CONDUIT_SMC;
+		}
+
+		pr_warn("invalid \"method\" property: %s\n", method);
+	} else if (!acpi_disabled) {
+		if (acpi_psci_use_hvc()) {
+			sdei_firmware_call = &sdei_smccc_hvc;
+			return SMCCC_CONDUIT_HVC;
+		} else {
+			sdei_firmware_call = &sdei_smccc_smc;
+			return SMCCC_CONDUIT_SMC;
+		}
+	}
+
+	return SMCCC_CONDUIT_NONE;
+}
+
+static int sdei_probe(struct platform_device *pdev)
+{
+	int err;
+	u64 ver = 0;
+	int conduit;
+
+	conduit = sdei_get_conduit(pdev);
+	if (!sdei_firmware_call)
+		return 0;
+
+	err = sdei_api_get_version(&ver);
+	if (err) {
+		pr_err("Failed to get SDEI version: %d\n", err);
+		sdei_mark_interface_broken();
+		return err;
+	}
+
+	pr_info("SDEIv%d.%d (0x%x) detected in firmware.\n",
+		(int)SDEI_VERSION_MAJOR(ver), (int)SDEI_VERSION_MINOR(ver),
+		(int)SDEI_VERSION_VENDOR(ver));
+
+	if (SDEI_VERSION_MAJOR(ver) != 1) {
+		pr_warn("Conflicting SDEI version detected.\n");
+		sdei_mark_interface_broken();
+		return -EINVAL;
+	}
+
+	err = sdei_platform_reset();
+	if (err)
+		return err;
+
+	sdei_entry_point = sdei_arch_get_entry_point(conduit);
+	if (!sdei_entry_point) {
+		/* Not supported due to hardware or boot configuration */
+		sdei_mark_interface_broken();
+		return 0;
+	}
+
+	err = cpu_pm_register_notifier(&sdei_pm_nb);
+	if (err) {
+		pr_warn("Failed to register CPU PM notifier...\n");
+		goto error;
+	}
+
+	err = register_reboot_notifier(&sdei_reboot_nb);
+	if (err) {
+		pr_warn("Failed to register reboot notifier...\n");
+		goto remove_cpupm;
+	}
+
+	err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI",
+				&sdei_cpuhp_up, &sdei_cpuhp_down);
+	if (err < 0) {
+		pr_warn("Failed to register CPU hotplug notifier...\n");
+		goto remove_reboot;
+	}
+
+	sdei_hp_state = err;
+
+	return 0;
+
+remove_reboot:
+	unregister_reboot_notifier(&sdei_reboot_nb);
+
+remove_cpupm:
+	cpu_pm_unregister_notifier(&sdei_pm_nb);
+
+error:
+	sdei_mark_interface_broken();
+	return err;
+}
+
+static const struct of_device_id sdei_of_match[] = {
+	{ .compatible = "arm,sdei-1.0" },
+	{}
+};
+
+static struct platform_driver sdei_driver = {
+	.driver		= {
+		.name			= "sdei",
+		.pm			= &sdei_pm_ops,
+		.of_match_table		= sdei_of_match,
+	},
+	.probe		= sdei_probe,
+};
+
+static bool __init sdei_present_acpi(void)
+{
+	acpi_status status;
+	struct acpi_table_header *sdei_table_header;
+
+	if (acpi_disabled)
+		return false;
+
+	status = acpi_get_table(ACPI_SIG_SDEI, 0, &sdei_table_header);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		const char *msg = acpi_format_exception(status);
+
+		pr_info("Failed to get ACPI:SDEI table, %s\n", msg);
+	}
+	if (ACPI_FAILURE(status))
+		return false;
+
+	acpi_put_table(sdei_table_header);
+
+	return true;
+}
+
+void __init sdei_init(void)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	ret = platform_driver_register(&sdei_driver);
+	if (ret || !sdei_present_acpi())
+		return;
+
+	pdev = platform_device_register_simple(sdei_driver.driver.name,
+					       0, NULL, 0);
+	if (IS_ERR(pdev)) {
+		ret = PTR_ERR(pdev);
+		platform_driver_unregister(&sdei_driver);
+		pr_info("Failed to register ACPI:SDEI platform device %d\n",
+			ret);
+	}
+}
+
+int sdei_event_handler(struct pt_regs *regs,
+		       struct sdei_registered_event *arg)
+{
+	int err;
+	mm_segment_t orig_addr_limit;
+	u32 event_num = arg->event_num;
+
+	/*
+	 * Save restore 'fs'.
+	 * The architecture's entry code save/restores 'fs' when taking an
+	 * exception from the kernel. This ensures addr_limit isn't inherited
+	 * if you interrupted something that allowed the uaccess routines to
+	 * access kernel memory.
+	 * Do the same here because this doesn't come via the same entry code.
+	*/
+	orig_addr_limit = force_uaccess_begin();
+
+	err = arg->callback(event_num, regs, arg->callback_arg);
+	if (err)
+		pr_err_ratelimited("event %u on CPU %u failed with error: %d\n",
+				   event_num, smp_processor_id(), err);
+
+	force_uaccess_end(orig_addr_limit);
+
+	return err;
+}
+NOKPROBE_SYMBOL(sdei_event_handler);
+
+void sdei_handler_abort(void)
+{
+	/*
+	 * If the crash happened in an SDEI event handler then we need to
+	 * finish the handler with the firmware so that we can have working
+	 * interrupts in the crash kernel.
+	 */
+	if (__this_cpu_read(sdei_active_critical_event)) {
+	        pr_warn("still in SDEI critical event context, attempting to finish handler.\n");
+	        __sdei_handler_abort();
+	        __this_cpu_write(sdei_active_critical_event, NULL);
+	}
+	if (__this_cpu_read(sdei_active_normal_event)) {
+	        pr_warn("still in SDEI normal event context, attempting to finish handler.\n");
+	        __sdei_handler_abort();
+	        __this_cpu_write(sdei_active_normal_event, NULL);
+	}
+}
diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
new file mode 100644
index 000000000..8e3d355a6
--- /dev/null
+++ b/drivers/firmware/broadcom/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM47XX_NVRAM
+	bool "Broadcom NVRAM driver"
+	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+	help
+	  Broadcom home routers contain flash partition called "nvram" with all
+	  important hardware configuration as well as some minor user setup.
+	  NVRAM partition contains a text-like data representing name=value
+	  pairs.
+	  This driver provides an easy way to get value of requested parameter.
+	  It simply reads content of NVRAM and parses it. It doesn't control any
+	  hardware part itself.
+
+config BCM47XX_SPROM
+	bool "Broadcom SPROM driver"
+	depends on BCM47XX_NVRAM
+	select GENERIC_NET_UTILS
+	help
+	  Broadcom devices store configuration data in SPROM. Accessing it is
+	  specific to the bus host type, e.g. PCI(e) devices have it mapped in
+	  a PCI BAR.
+	  In case of SoC devices SPROM content is stored on a flash used by
+	  bootloader firmware CFE. This driver provides method to ssb and bcma
+	  drivers to read SPROM on SoC.
+
+config TEE_BNXT_FW
+	tristate "Broadcom BNXT firmware manager"
+	depends on (ARCH_BCM_IPROC && OPTEE) || (COMPILE_TEST && TEE)
+	default ARCH_BCM_IPROC
+	help
+	  This module help to manage firmware on Broadcom BNXT device. The module
+	  registers on tee bus and invoke calls to manage firmware on BNXT device.
diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
new file mode 100644
index 000000000..17c5061c4
--- /dev/null
+++ b/drivers/firmware/broadcom/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM47XX_NVRAM)		+= bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_SPROM)		+= bcm47xx_sprom.o
+obj-$(CONFIG_TEE_BNXT_FW)		+= tee_bnxt_fw.o
diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
new file mode 100644
index 000000000..835ece9c0
--- /dev/null
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/bcm47xx_nvram.h>
+
+#define NVRAM_MAGIC			0x48534C46	/* 'FLSH' */
+#define NVRAM_SPACE			0x10000
+#define NVRAM_MAX_GPIO_ENTRIES		32
+#define NVRAM_MAX_GPIO_VALUE_LEN	30
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+static char nvram_buf[NVRAM_SPACE];
+static size_t nvram_len;
+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
+
+static u32 find_nvram_size(void __iomem *end)
+{
+	struct nvram_header __iomem *header;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
+		header = (struct nvram_header *)(end - nvram_sizes[i]);
+		if (header->magic == NVRAM_MAGIC)
+			return nvram_sizes[i];
+	}
+
+	return 0;
+}
+
+/* Probe for NVRAM header */
+static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
+{
+	struct nvram_header __iomem *header;
+	u32 off;
+	u32 size;
+
+	if (nvram_len) {
+		pr_warn("nvram already initialized\n");
+		return -EEXIST;
+	}
+
+	/* TODO: when nvram is on nand flash check for bad blocks first. */
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		size = find_nvram_size(iobase + off);
+		if (size) {
+			header = (struct nvram_header *)(iobase + off - size);
+			goto found;
+		}
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *)(iobase + 4096);
+	if (header->magic == NVRAM_MAGIC) {
+		size = NVRAM_SPACE;
+		goto found;
+	}
+
+	header = (struct nvram_header *)(iobase + 1024);
+	if (header->magic == NVRAM_MAGIC) {
+		size = NVRAM_SPACE;
+		goto found;
+	}
+
+	pr_err("no nvram found\n");
+	return -ENXIO;
+
+found:
+	__ioread32_copy(nvram_buf, header, sizeof(*header) / 4);
+	nvram_len = ((struct nvram_header *)(nvram_buf))->len;
+	if (nvram_len > size) {
+		pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
+		nvram_len = size;
+	}
+	if (nvram_len >= NVRAM_SPACE) {
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		       nvram_len, NVRAM_SPACE - 1);
+		nvram_len = NVRAM_SPACE - 1;
+	}
+	/* proceed reading data after header */
+	__ioread32_copy(nvram_buf + sizeof(*header), header + 1,
+			DIV_ROUND_UP(nvram_len, 4));
+	nvram_buf[NVRAM_SPACE - 1] = '\0';
+
+	return 0;
+}
+
+/*
+ * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
+ * subsystem to access flash. We can't even use platform device / driver to
+ * store memory offset.
+ * To handle this we provide following symbol. It's supposed to be called as
+ * soon as we get info about flash device, before any NVRAM entry is needed.
+ */
+int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
+{
+	void __iomem *iobase;
+	int err;
+
+	iobase = ioremap(base, lim);
+	if (!iobase)
+		return -ENOMEM;
+
+	err = nvram_find_and_copy(iobase, lim);
+
+	iounmap(iobase);
+
+	return err;
+}
+
+static int nvram_init(void)
+{
+#ifdef CONFIG_MTD
+	struct mtd_info *mtd;
+	struct nvram_header header;
+	size_t bytes_read;
+	int err;
+
+	mtd = get_mtd_device_nm("nvram");
+	if (IS_ERR(mtd))
+		return -ENODEV;
+
+	err = mtd_read(mtd, 0, sizeof(header), &bytes_read, (uint8_t *)&header);
+	if (!err && header.magic == NVRAM_MAGIC &&
+	    header.len > sizeof(header)) {
+		nvram_len = header.len;
+		if (nvram_len >= NVRAM_SPACE) {
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+				nvram_len, NVRAM_SPACE);
+			nvram_len = NVRAM_SPACE - 1;
+		}
+
+		err = mtd_read(mtd, 0, nvram_len, &nvram_len,
+			       (u8 *)nvram_buf);
+		return err;
+	}
+#endif
+
+	return -ENXIO;
+}
+
+int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+	int err;
+
+	if (!name)
+		return -EINVAL;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return err;
+	}
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf);
+	while (var < end && *var) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if (eq - var == strlen(name) &&
+		    strncmp(var, name, eq - var) == 0)
+			return snprintf(val, val_len, "%s", value);
+		var = value + strlen(value) + 1;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+
+int bcm47xx_nvram_gpio_pin(const char *name)
+{
+	int i, err;
+	char nvram_var[] = "gpioXX";
+	char buf[NVRAM_MAX_GPIO_VALUE_LEN];
+
+	/* TODO: Optimize it to don't call getenv so many times */
+	for (i = 0; i < NVRAM_MAX_GPIO_ENTRIES; i++) {
+		err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
+		if (err <= 0)
+			continue;
+		err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
+		if (err <= 0)
+			continue;
+		if (!strcmp(name, buf))
+			return i;
+	}
+	return -ENOENT;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
+
+char *bcm47xx_nvram_get_contents(size_t *nvram_size)
+{
+	int err;
+	char *nvram;
+
+	if (!nvram_len) {
+		err = nvram_init();
+		if (err)
+			return NULL;
+	}
+
+	*nvram_size = nvram_len - sizeof(struct nvram_header);
+	nvram = vmalloc(*nvram_size);
+	if (!nvram)
+		return NULL;
+	memcpy(nvram, &nvram_buf[sizeof(struct nvram_header)], *nvram_size);
+
+	return nvram;
+}
+EXPORT_SYMBOL(bcm47xx_nvram_get_contents);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/broadcom/bcm47xx_sprom.c b/drivers/firmware/broadcom/bcm47xx_sprom.c
new file mode 100644
index 000000000..14fbcd116
--- /dev/null
+++ b/drivers/firmware/broadcom/bcm47xx_sprom.c
@@ -0,0 +1,726 @@
+/*
+ *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2006 Michael Buesch <m@bues.ch>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
+ *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bcm47xx_nvram.h>
+#include <linux/bcm47xx_sprom.h>
+#include <linux/bcma/bcma.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/ssb/ssb.h>
+
+static void create_key(const char *prefix, const char *postfix,
+		       const char *name, char *buf, int len)
+{
+	if (prefix && postfix)
+		snprintf(buf, len, "%s%s%s", prefix, name, postfix);
+	else if (prefix)
+		snprintf(buf, len, "%s%s", prefix, name);
+	else if (postfix)
+		snprintf(buf, len, "%s%s", name, postfix);
+	else
+		snprintf(buf, len, "%s", name);
+}
+
+static int get_nvram_var(const char *prefix, const char *postfix,
+			 const char *name, char *buf, int len, bool fallback)
+{
+	char key[40];
+	int err;
+
+	create_key(prefix, postfix, name, key, sizeof(key));
+
+	err = bcm47xx_nvram_getenv(key, buf, len);
+	if (fallback && err == -ENOENT && prefix) {
+		create_key(NULL, postfix, name, key, sizeof(key));
+		err = bcm47xx_nvram_getenv(key, buf, len);
+	}
+	return err;
+}
+
+#define NVRAM_READ_VAL(type)						\
+static void nvram_read_ ## type(const char *prefix,			\
+				const char *postfix, const char *name,	\
+				type *val, type allset, bool fallback)	\
+{									\
+	char buf[100];							\
+	int err;							\
+	type var;							\
+									\
+	err = get_nvram_var(prefix, postfix, name, buf, sizeof(buf),	\
+			    fallback);					\
+	if (err < 0)							\
+		return;							\
+	err = kstrto ## type(strim(buf), 0, &var);			\
+	if (err) {							\
+		pr_warn("can not parse nvram name %s%s%s with value %s got %i\n",	\
+			prefix, name, postfix, buf, err);		\
+		return;							\
+	}								\
+	if (allset && var == allset)					\
+		return;							\
+	*val = var;							\
+}
+
+NVRAM_READ_VAL(u8)
+NVRAM_READ_VAL(s8)
+NVRAM_READ_VAL(u16)
+NVRAM_READ_VAL(u32)
+
+#undef NVRAM_READ_VAL
+
+static void nvram_read_u32_2(const char *prefix, const char *name,
+			     u16 *val_lo, u16 *val_hi, bool fallback)
+{
+	char buf[100];
+	int err;
+	u32 val;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	err = kstrtou32(strim(buf), 0, &val);
+	if (err) {
+		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+			prefix, name, buf, err);
+		return;
+	}
+	*val_lo = (val & 0x0000FFFFU);
+	*val_hi = (val & 0xFFFF0000U) >> 16;
+}
+
+static void nvram_read_leddc(const char *prefix, const char *name,
+			     u8 *leddc_on_time, u8 *leddc_off_time,
+			     bool fallback)
+{
+	char buf[100];
+	int err;
+	u32 val;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	err = kstrtou32(strim(buf), 0, &val);
+	if (err) {
+		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+			prefix, name, buf, err);
+		return;
+	}
+
+	if (val == 0xffff || val == 0xffffffff)
+		return;
+
+	*leddc_on_time = val & 0xff;
+	*leddc_off_time = (val >> 16) & 0xff;
+}
+
+static void nvram_read_macaddr(const char *prefix, const char *name,
+			       u8 val[6], bool fallback)
+{
+	char buf[100];
+	int err;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+
+	strreplace(buf, '-', ':');
+	if (!mac_pton(buf, val))
+		pr_warn("Can not parse mac address: %s\n", buf);
+}
+
+static void nvram_read_alpha2(const char *prefix, const char *name,
+			     char val[2], bool fallback)
+{
+	char buf[10];
+	int err;
+
+	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+	if (err < 0)
+		return;
+	if (buf[0] == '0')
+		return;
+	if (strlen(buf) > 2) {
+		pr_warn("alpha2 is too long %s\n", buf);
+		return;
+	}
+	memcpy(val, buf, 2);
+}
+
+/* This is one-function-only macro, it uses local "sprom" variable! */
+#define ENTRY(_revmask, _type, _prefix, _name, _val, _allset, _fallback) \
+	if (_revmask & BIT(sprom->revision)) \
+		nvram_read_ ## _type(_prefix, NULL, _name, &sprom->_val, \
+				     _allset, _fallback)
+/*
+ * Special version of filling function that can be safely called for any SPROM
+ * revision. For every NVRAM to SPROM mapping it contains bitmask of revisions
+ * for which the mapping is valid.
+ * It obviously requires some hexadecimal/bitmasks knowledge, but allows
+ * writing cleaner code (easy revisions handling).
+ * Note that while SPROM revision 0 was never used, we still keep BIT(0)
+ * reserved for it, just to keep numbering sane.
+ */
+static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
+				    const char *prefix, bool fallback)
+{
+	const char *pre = prefix;
+	bool fb = fallback;
+
+	/* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */
+	ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback);
+
+	ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
+	ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
+	ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
+	ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
+	ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
+	ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
+	ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
+	ENTRY(0x00000002, u8, pre, "cc", country_code, 0, fb);
+	ENTRY(0xfffffff8, u8, pre, "regrev", regrev, 0, fb);
+
+	ENTRY(0xfffffffe, u8, pre, "ledbh0", gpio0, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh1", gpio1, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh2", gpio2, 0xff, fb);
+	ENTRY(0xfffffffe, u8, pre, "ledbh3", gpio3, 0xff, fb);
+
+	ENTRY(0x0000070e, u16, pre, "pa0b0", pa0b0, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa0b1", pa0b1, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa0b2", pa0b2, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa0itssit", itssi_bg, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa0maxpwr", maxpwr_bg, 0, fb);
+
+	ENTRY(0x0000070c, u8, pre, "opo", opo, 0, fb);
+	ENTRY(0xfffffffe, u8, pre, "aa2g", ant_available_bg, 0, fb);
+	ENTRY(0xfffffffe, u8, pre, "aa5g", ant_available_a, 0, fb);
+	ENTRY(0x000007fe, s8, pre, "ag0", antenna_gain.a0, 0, fb);
+	ENTRY(0x000007fe, s8, pre, "ag1", antenna_gain.a1, 0, fb);
+	ENTRY(0x000007f0, s8, pre, "ag2", antenna_gain.a2, 0, fb);
+	ENTRY(0x000007f0, s8, pre, "ag3", antenna_gain.a3, 0, fb);
+
+	ENTRY(0x0000070e, u16, pre, "pa1b0", pa1b0, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa1b1", pa1b1, 0, fb);
+	ENTRY(0x0000070e, u16, pre, "pa1b2", pa1b2, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob0", pa1lob0, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob1", pa1lob1, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1lob2", pa1lob2, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib0", pa1hib0, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib1", pa1hib1, 0, fb);
+	ENTRY(0x0000070c, u16, pre, "pa1hib2", pa1hib2, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa1itssit", itssi_a, 0, fb);
+	ENTRY(0x0000070e, u8, pre, "pa1maxpwr", maxpwr_a, 0, fb);
+	ENTRY(0x0000070c, u8, pre, "pa1lomaxpwr", maxpwr_al, 0, fb);
+	ENTRY(0x0000070c, u8, pre, "pa1himaxpwr", maxpwr_ah, 0, fb);
+
+	ENTRY(0x00000708, u8, pre, "bxa2g", bxa2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssisav2g", rssisav2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismc2g", rssismc2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismf2g", rssismf2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "bxa5g", bxa5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssisav5g", rssisav5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismc5g", rssismc5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "rssismf5g", rssismf5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri2g", tri2g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5g", tri5g, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5gl", tri5gl, 0, fb);
+	ENTRY(0x00000708, u8, pre, "tri5gh", tri5gh, 0, fb);
+	ENTRY(0x00000708, s8, pre, "rxpo2g", rxpo2g, 0, fb);
+	ENTRY(0x00000708, s8, pre, "rxpo5g", rxpo5g, 0, fb);
+	ENTRY(0xfffffff0, u8, pre, "txchain", txchain, 0xf, fb);
+	ENTRY(0xfffffff0, u8, pre, "rxchain", rxchain, 0xf, fb);
+	ENTRY(0xfffffff0, u8, pre, "antswitch", antswitch, 0xff, fb);
+	ENTRY(0x00000700, u8, pre, "tssipos2g", fem.ghz2.tssipos, 0, fb);
+	ENTRY(0x00000700, u8, pre, "extpagain2g", fem.ghz2.extpa_gain, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pdetrange2g", fem.ghz2.pdet_range, 0, fb);
+	ENTRY(0x00000700, u8, pre, "triso2g", fem.ghz2.tr_iso, 0, fb);
+	ENTRY(0x00000700, u8, pre, "antswctl2g", fem.ghz2.antswlut, 0, fb);
+	ENTRY(0x00000700, u8, pre, "tssipos5g", fem.ghz5.tssipos, 0, fb);
+	ENTRY(0x00000700, u8, pre, "extpagain5g", fem.ghz5.extpa_gain, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pdetrange5g", fem.ghz5.pdet_range, 0, fb);
+	ENTRY(0x00000700, u8, pre, "triso5g", fem.ghz5.tr_iso, 0, fb);
+	ENTRY(0x00000700, u8, pre, "antswctl5g", fem.ghz5.antswlut, 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga0", txpid2g[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga1", txpid2g[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga2", txpid2g[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid2ga3", txpid2g[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga0", txpid5g[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga1", txpid5g[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga2", txpid5g[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5ga3", txpid5g[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla0", txpid5gl[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla1", txpid5gl[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla2", txpid5gl[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gla3", txpid5gl[3], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha0", txpid5gh[0], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha1", txpid5gh[1], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha2", txpid5gh[2], 0, fb);
+	ENTRY(0x000000f0, u8, pre, "txpid5gha3", txpid5gh[3], 0, fb);
+
+	ENTRY(0xffffff00, u8, pre, "tempthresh", tempthresh, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempoffset", tempoffset, 0, fb);
+	ENTRY(0xffffff00, u16, pre, "rawtempsense", rawtempsense, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower", measpower, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempsense_slope", tempsense_slope, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempcorrx", tempcorrx, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "tempsense_option", tempsense_option, 0, fb);
+	ENTRY(0x00000700, u8, pre, "freqoffset_corr", freqoffset_corr, 0, fb);
+	ENTRY(0x00000700, u8, pre, "iqcal_swp_dis", iqcal_swp_dis, 0, fb);
+	ENTRY(0x00000700, u8, pre, "hw_iqcal_en", hw_iqcal_en, 0, fb);
+	ENTRY(0x00000700, u8, pre, "elna2g", elna2g, 0, fb);
+	ENTRY(0x00000700, u8, pre, "elna5g", elna5g, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "phycal_tempdelta", phycal_tempdelta, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "temps_period", temps_period, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "temps_hysteresis", temps_hysteresis, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower1", measpower1, 0, fb);
+	ENTRY(0xffffff00, u8, pre, "measpower2", measpower2, 0, fb);
+
+	ENTRY(0x000001f0, u16, pre, "cck2gpo", cck2gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm2gpo", ofdm2gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5gpo", ofdm5gpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5glpo", ofdm5glpo, 0, fb);
+	ENTRY(0x000001f0, u32, pre, "ofdm5ghpo", ofdm5ghpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo0", mcs2gpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo1", mcs2gpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo2", mcs2gpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo3", mcs2gpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo4", mcs2gpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo5", mcs2gpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo6", mcs2gpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs2gpo7", mcs2gpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo0", mcs5gpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo1", mcs5gpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo2", mcs5gpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo3", mcs5gpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo4", mcs5gpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo5", mcs5gpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo6", mcs5gpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5gpo7", mcs5gpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo0", mcs5glpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo1", mcs5glpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo2", mcs5glpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo3", mcs5glpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo4", mcs5glpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo5", mcs5glpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo6", mcs5glpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5glpo7", mcs5glpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo0", mcs5ghpo[0], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo1", mcs5ghpo[1], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo2", mcs5ghpo[2], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo3", mcs5ghpo[3], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo4", mcs5ghpo[4], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo5", mcs5ghpo[5], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo6", mcs5ghpo[6], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "mcs5ghpo7", mcs5ghpo[7], 0, fb);
+	ENTRY(0x000001f0, u16, pre, "cddpo", cddpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "stbcpo", stbcpo, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "bw40po", bw40po, 0, fb);
+	ENTRY(0x000001f0, u16, pre, "bwduppo", bwduppo, 0, fb);
+
+	ENTRY(0xfffffe00, u16, pre, "cckbw202gpo", cckbw202gpo, 0, fb);
+	ENTRY(0xfffffe00, u16, pre, "cckbw20ul2gpo", cckbw20ul2gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw202gpo", legofdmbw202gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul2gpo", legofdmbw20ul2gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205glpo", legofdmbw205glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5glpo", legofdmbw20ul5glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205gmpo", legofdmbw205gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5gmpo", legofdmbw20ul5gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw205ghpo", legofdmbw205ghpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "legofdmbw20ul5ghpo", legofdmbw20ul5ghpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw202gpo", mcsbw202gpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul2gpo", mcsbw20ul2gpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw402gpo", mcsbw402gpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205glpo", mcsbw205glpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5glpo", mcsbw20ul5glpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405glpo", mcsbw405glpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205gmpo", mcsbw205gmpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5gmpo", mcsbw20ul5gmpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405gmpo", mcsbw405gmpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw205ghpo", mcsbw205ghpo, 0, fb);
+	ENTRY(0x00000600, u32, pre, "mcsbw20ul5ghpo", mcsbw20ul5ghpo, 0, fb);
+	ENTRY(0xfffffe00, u32, pre, "mcsbw405ghpo", mcsbw405ghpo, 0, fb);
+	ENTRY(0x00000600, u16, pre, "mcs32po", mcs32po, 0, fb);
+	ENTRY(0x00000600, u16, pre, "legofdm40duppo", legofdm40duppo, 0, fb);
+	ENTRY(0x00000700, u8, pre, "pcieingress_war", pcieingress_war, 0, fb);
+
+	/* TODO: rev 11 support */
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga0", rxgainerr2ga[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga1", rxgainerr2ga[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr2ga2", rxgainerr2ga[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla0", rxgainerr5gla[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla1", rxgainerr5gla[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gla2", rxgainerr5gla[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma0", rxgainerr5gma[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma1", rxgainerr5gma[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gma2", rxgainerr5gma[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha0", rxgainerr5gha[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha1", rxgainerr5gha[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gha2", rxgainerr5gha[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua0", rxgainerr5gua[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua1", rxgainerr5gua[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "rxgainerr5gua2", rxgainerr5gua[2], 0, fb);
+
+	ENTRY(0xfffffe00, u8, pre, "sar2g", sar2g, 0, fb);
+	ENTRY(0xfffffe00, u8, pre, "sar5g", sar5g, 0, fb);
+
+	/* TODO: rev 11 support */
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga0", noiselvl2ga[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga1", noiselvl2ga[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl2ga2", noiselvl2ga[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla0", noiselvl5gla[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla1", noiselvl5gla[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gla2", noiselvl5gla[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma0", noiselvl5gma[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma1", noiselvl5gma[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gma2", noiselvl5gma[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha0", noiselvl5gha[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha1", noiselvl5gha[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gha2", noiselvl5gha[2], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua0", noiselvl5gua[0], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua1", noiselvl5gua[1], 0, fb);
+	ENTRY(0x00000700, u8, pre, "noiselvl5gua2", noiselvl5gua[2], 0, fb);
+}
+#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */
+
+static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
+					  const char *prefix, bool fallback)
+{
+	char postfix[2];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
+		snprintf(postfix, sizeof(postfix), "%i", i);
+		nvram_read_u8(prefix, postfix, "maxp2ga",
+			      &pwr_info->maxpwr_2g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "itt2ga",
+			      &pwr_info->itssi_2g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "itt5ga",
+			      &pwr_info->itssi_5g, 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw0a",
+			       &pwr_info->pa_2g[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw1a",
+			       &pwr_info->pa_2g[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa2gw2a",
+			       &pwr_info->pa_2g[2], 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5ga",
+			      &pwr_info->maxpwr_5g, 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5gha",
+			      &pwr_info->maxpwr_5gh, 0, fallback);
+		nvram_read_u8(prefix, postfix, "maxp5gla",
+			      &pwr_info->maxpwr_5gl, 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw0a",
+			       &pwr_info->pa_5g[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw1a",
+			       &pwr_info->pa_5g[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw2a",
+			       &pwr_info->pa_5g[2], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw0a",
+			       &pwr_info->pa_5gl[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw1a",
+			       &pwr_info->pa_5gl[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw2a",
+			       &pwr_info->pa_5gl[2], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw0a",
+			       &pwr_info->pa_5gh[0], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw1a",
+			       &pwr_info->pa_5gh[1], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw2a",
+			       &pwr_info->pa_5gh[2], 0, fallback);
+	}
+}
+
+static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
+					const char *prefix, bool fallback)
+{
+	char postfix[2];
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
+		snprintf(postfix, sizeof(postfix), "%i", i);
+		nvram_read_u16(prefix, postfix, "pa2gw3a",
+			       &pwr_info->pa_2g[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5gw3a",
+			       &pwr_info->pa_5g[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5glw3a",
+			       &pwr_info->pa_5gl[3], 0, fallback);
+		nvram_read_u16(prefix, postfix, "pa5ghw3a",
+			       &pwr_info->pa_5gh[3], 0, fallback);
+	}
+}
+
+static bool bcm47xx_is_valid_mac(u8 *mac)
+{
+	return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
+}
+
+static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
+{
+	u8 *oui = mac + ETH_ALEN/2 - 1;
+	u8 *p = mac + ETH_ALEN - 1;
+
+	do {
+		(*p) += num;
+		if (*p > num)
+			break;
+		p--;
+		num = 1;
+	} while (p != oui);
+
+	if (p == oui) {
+		pr_err("unable to fetch mac address\n");
+		return -ENOENT;
+	}
+	return 0;
+}
+
+static int mac_addr_used = 2;
+
+static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
+					const char *prefix, bool fallback)
+{
+	bool fb = fallback;
+
+	nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
+	nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
+		      fallback);
+	nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
+		      fallback);
+
+	nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
+	nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
+		      fallback);
+	nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
+		      fallback);
+
+	nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
+	nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
+	nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
+
+	nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
+	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
+
+	/* The address prefix 00:90:4C is used by Broadcom in their initial
+	 * configuration. When a mac address with the prefix 00:90:4C is used
+	 * all devices from the same series are sharing the same mac address.
+	 * To prevent mac address collisions we replace them with a mac address
+	 * based on the base address.
+	 */
+	if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
+		u8 mac[6];
+
+		nvram_read_macaddr(NULL, "et0macaddr", mac, false);
+		if (bcm47xx_is_valid_mac(mac)) {
+			int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
+
+			if (!err) {
+				ether_addr_copy(sprom->il0mac, mac);
+				mac_addr_used++;
+			}
+		}
+	}
+}
+
+static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
+				    bool fallback)
+{
+	nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+			 &sprom->boardflags_hi, fallback);
+	nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
+			 &sprom->boardflags2_hi, fallback);
+}
+
+void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
+			bool fallback)
+{
+	bcm47xx_fill_sprom_ethernet(sprom, prefix, fallback);
+	bcm47xx_fill_board_data(sprom, prefix, fallback);
+
+	nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback);
+
+	/* Entries requiring custom functions */
+	nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
+	if (sprom->revision >= 3)
+		nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
+				 &sprom->leddc_off_time, fallback);
+
+	switch (sprom->revision) {
+	case 4:
+	case 5:
+		bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
+		bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback);
+		break;
+	case 8:
+	case 9:
+		bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
+		break;
+	}
+
+	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
+}
+
+#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
+static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
+{
+	char prefix[10];
+
+	switch (bus->bustype) {
+	case SSB_BUSTYPE_SSB:
+		bcm47xx_fill_sprom(out, NULL, false);
+		return 0;
+	case SSB_BUSTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
+			 bus->host_pci->bus->number + 1,
+			 PCI_SLOT(bus->host_pci->devfn));
+		bcm47xx_fill_sprom(out, prefix, false);
+		return 0;
+	default:
+		pr_warn("Unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+}
+#endif
+
+#if IS_BUILTIN(CONFIG_BCMA)
+/*
+ * Having many NVRAM entries for PCI devices led to repeating prefixes like
+ * pci/1/1/ all the time and wasting flash space. So at some point Broadcom
+ * decided to introduce prefixes like 0: 1: 2: etc.
+ * If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0:
+ * instead of pci/2/1/.
+ */
+static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
+{
+	size_t prefix_len = strlen(prefix);
+	size_t short_len = prefix_len - 1;
+	char nvram_var[10];
+	char buf[20];
+	int i;
+
+	/* Passed prefix has to end with a slash */
+	if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
+		return;
+
+	for (i = 0; i < 3; i++) {
+		if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0)
+			continue;
+		if (bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)) < 0)
+			continue;
+		if (!strcmp(buf, prefix) ||
+		    (short_len && strlen(buf) == short_len && !strncmp(buf, prefix, short_len))) {
+			snprintf(prefix, prefix_size, "%d:", i);
+			return;
+		}
+	}
+}
+
+static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
+{
+	struct bcma_boardinfo *binfo = &bus->boardinfo;
+	struct bcma_device *core;
+	char buf[10];
+	char *prefix;
+	bool fallback = false;
+
+	switch (bus->hosttype) {
+	case BCMA_HOSTTYPE_PCI:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		/* On BCM47XX all PCI buses share the same domain */
+		if (IS_ENABLED(CONFIG_BCM47XX))
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 bus->host_pci->bus->number + 1,
+				 PCI_SLOT(bus->host_pci->devfn));
+		else
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 pci_domain_nr(bus->host_pci->bus) + 1,
+				 bus->host_pci->bus->number);
+		bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
+		prefix = buf;
+		break;
+	case BCMA_HOSTTYPE_SOC:
+		memset(out, 0, sizeof(struct ssb_sprom));
+		core = bcma_find_core(bus, BCMA_CORE_80211);
+		if (core) {
+			snprintf(buf, sizeof(buf), "sb/%u/",
+				 core->core_index);
+			prefix = buf;
+			fallback = true;
+		} else {
+			prefix = NULL;
+		}
+		break;
+	default:
+		pr_warn("Unable to fill SPROM for given bustype.\n");
+		return -EINVAL;
+	}
+
+	nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
+	if (!binfo->vendor)
+		binfo->vendor = SSB_BOARDVENDOR_BCM;
+	nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
+
+	bcm47xx_fill_sprom(out, prefix, fallback);
+
+	return 0;
+}
+#endif
+
+static unsigned int bcm47xx_sprom_registered;
+
+/*
+ * On bcm47xx we need to register SPROM fallback handler very early, so we can't
+ * use anything like platform device / driver for this.
+ */
+int bcm47xx_sprom_register_fallbacks(void)
+{
+	if (bcm47xx_sprom_registered)
+		return 0;
+
+#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
+	if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
+		pr_warn("Failed to register ssb SPROM handler\n");
+#endif
+
+#if IS_BUILTIN(CONFIG_BCMA)
+	if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
+		pr_warn("Failed to register bcma SPROM handler\n");
+#endif
+
+	bcm47xx_sprom_registered = 1;
+
+	return 0;
+}
+
+fs_initcall(bcm47xx_sprom_register_fallbacks);
diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c
new file mode 100644
index 000000000..a5bf4c3f6
--- /dev/null
+++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Broadcom.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#include <linux/firmware/broadcom/tee_bnxt_fw.h>
+
+#define MAX_SHM_MEM_SZ	SZ_4M
+
+#define MAX_TEE_PARAM_ARRY_MEMB		4
+
+enum ta_cmd {
+	/*
+	 * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
+	 *
+	 *	param[0] unused
+	 *	param[1] unused
+	 *	param[2] unused
+	 *	param[3] unused
+	 *
+	 * Result:
+	 *	TEE_SUCCESS - Invoke command success
+	 *	TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
+	 */
+	TA_CMD_BNXT_FASTBOOT = 0,
+
+	/*
+	 * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
+	 *
+	 *	param[0] (inout memref) - Coredump buffer memory reference
+	 *	param[1] (in value) - value.a: offset, data to be copied from
+	 *			      value.b: size of data to be copied
+	 *	param[2] unused
+	 *	param[3] unused
+	 *
+	 * Result:
+	 *	TEE_SUCCESS - Invoke command success
+	 *	TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+	 *	TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
+	 */
+	TA_CMD_BNXT_COPY_COREDUMP = 3,
+};
+
+/**
+ * struct tee_bnxt_fw_private - OP-TEE bnxt private data
+ * @dev:		OP-TEE based bnxt device.
+ * @ctx:		OP-TEE context handler.
+ * @session_id:		TA session identifier.
+ */
+struct tee_bnxt_fw_private {
+	struct device *dev;
+	struct tee_context *ctx;
+	u32 session_id;
+	struct tee_shm *fw_shm_pool;
+};
+
+static struct tee_bnxt_fw_private pvt_data;
+
+static void prepare_args(int cmd,
+			 struct tee_ioctl_invoke_arg *arg,
+			 struct tee_param *param)
+{
+	memset(arg, 0, sizeof(*arg));
+	memset(param, 0, MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param));
+
+	arg->func = cmd;
+	arg->session = pvt_data.session_id;
+	arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
+
+	/* Fill invoke cmd params */
+	switch (cmd) {
+	case TA_CMD_BNXT_COPY_COREDUMP:
+		param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+		param[0].u.memref.shm = pvt_data.fw_shm_pool;
+		param[0].u.memref.size = MAX_SHM_MEM_SZ;
+		param[0].u.memref.shm_offs = 0;
+		param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+		break;
+	case TA_CMD_BNXT_FASTBOOT:
+	default:
+		/* Nothing to do */
+		break;
+	}
+}
+
+/**
+ * tee_bnxt_fw_load() - Load the bnxt firmware
+ *		    Uses an OP-TEE call to start a secure
+ *		    boot process.
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_fw_load(void)
+{
+	int ret = 0;
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+
+	if (!pvt_data.ctx)
+		return -ENODEV;
+
+	prepare_args(TA_CMD_BNXT_FASTBOOT, &arg, param);
+
+	ret = tee_client_invoke_func(pvt_data.ctx, &arg, param);
+	if (ret < 0 || arg.ret != 0) {
+		dev_err(pvt_data.dev,
+			"TA_CMD_BNXT_FASTBOOT invoke failed TEE err: %x, ret:%x\n",
+			arg.ret, ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_fw_load);
+
+/**
+ * tee_bnxt_copy_coredump() - Copy coredump from the allocated memory
+ *			    Uses an OP-TEE call to copy coredump
+ * @buf:	destination buffer where core dump is copied into
+ * @offset:	offset from the base address of core dump area
+ * @size:	size of the dump
+ *
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size)
+{
+	struct tee_ioctl_invoke_arg arg;
+	struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+	void *core_data;
+	u32 rbytes = size;
+	u32 nbytes = 0;
+	int ret = 0;
+
+	if (!pvt_data.ctx)
+		return -ENODEV;
+
+	prepare_args(TA_CMD_BNXT_COPY_COREDUMP, &arg, param);
+
+	while (rbytes)  {
+		nbytes = rbytes;
+
+		nbytes = min_t(u32, rbytes, param[0].u.memref.size);
+
+		/* Fill additional invoke cmd params */
+		param[1].u.value.a = offset;
+		param[1].u.value.b = nbytes;
+
+		ret = tee_client_invoke_func(pvt_data.ctx, &arg, param);
+		if (ret < 0 || arg.ret != 0) {
+			dev_err(pvt_data.dev,
+				"TA_CMD_BNXT_COPY_COREDUMP invoke failed TEE err: %x, ret:%x\n",
+				arg.ret, ret);
+			return -EINVAL;
+		}
+
+		core_data = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
+		if (IS_ERR(core_data)) {
+			dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
+			return PTR_ERR(core_data);
+		}
+
+		memcpy(buf, core_data, nbytes);
+
+		rbytes -= nbytes;
+		buf += nbytes;
+		offset += nbytes;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_copy_coredump);
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+	return (ver->impl_id == TEE_IMPL_ID_OPTEE);
+}
+
+static int tee_bnxt_fw_probe(struct device *dev)
+{
+	struct tee_client_device *bnxt_device = to_tee_client_device(dev);
+	int ret, err = -ENODEV;
+	struct tee_ioctl_open_session_arg sess_arg;
+	struct tee_shm *fw_shm_pool;
+
+	memset(&sess_arg, 0, sizeof(sess_arg));
+
+	/* Open context with TEE driver */
+	pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
+					       NULL);
+	if (IS_ERR(pvt_data.ctx))
+		return -ENODEV;
+
+	/* Open session with Bnxt load Trusted App */
+	memcpy(sess_arg.uuid, bnxt_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+	sess_arg.num_params = 0;
+
+	ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
+	if (ret < 0 || sess_arg.ret != 0) {
+		dev_err(dev, "tee_client_open_session failed, err: %x\n",
+			sess_arg.ret);
+		err = -EINVAL;
+		goto out_ctx;
+	}
+	pvt_data.session_id = sess_arg.session;
+
+	pvt_data.dev = dev;
+
+	fw_shm_pool = tee_shm_alloc_kernel_buf(pvt_data.ctx, MAX_SHM_MEM_SZ);
+	if (IS_ERR(fw_shm_pool)) {
+		dev_err(pvt_data.dev, "tee_shm_alloc_kernel_buf failed\n");
+		err = PTR_ERR(fw_shm_pool);
+		goto out_sess;
+	}
+
+	pvt_data.fw_shm_pool = fw_shm_pool;
+
+	return 0;
+
+out_sess:
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+out_ctx:
+	tee_client_close_context(pvt_data.ctx);
+
+	return err;
+}
+
+static int tee_bnxt_fw_remove(struct device *dev)
+{
+	tee_shm_free(pvt_data.fw_shm_pool);
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+	tee_client_close_context(pvt_data.ctx);
+	pvt_data.ctx = NULL;
+
+	return 0;
+}
+
+static void tee_bnxt_fw_shutdown(struct device *dev)
+{
+	tee_shm_free(pvt_data.fw_shm_pool);
+	tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+	tee_client_close_context(pvt_data.ctx);
+	pvt_data.ctx = NULL;
+}
+
+static const struct tee_client_device_id tee_bnxt_fw_id_table[] = {
+	{UUID_INIT(0x6272636D, 0x2019, 0x0716,
+		    0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(tee, tee_bnxt_fw_id_table);
+
+static struct tee_client_driver tee_bnxt_fw_driver = {
+	.id_table	= tee_bnxt_fw_id_table,
+	.driver		= {
+		.name		= KBUILD_MODNAME,
+		.bus		= &tee_bus_type,
+		.probe		= tee_bnxt_fw_probe,
+		.remove		= tee_bnxt_fw_remove,
+		.shutdown	= tee_bnxt_fw_shutdown,
+	},
+};
+
+static int __init tee_bnxt_fw_mod_init(void)
+{
+	return driver_register(&tee_bnxt_fw_driver.driver);
+}
+
+static void __exit tee_bnxt_fw_mod_exit(void)
+{
+	driver_unregister(&tee_bnxt_fw_driver.driver);
+}
+
+module_init(tee_bnxt_fw_mod_init);
+module_exit(tee_bnxt_fw_mod_exit);
+
+MODULE_AUTHOR("Vikas Gupta <vikas.gupta@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom bnxt firmware manager");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
new file mode 100644
index 000000000..86d71b021
--- /dev/null
+++ b/drivers/firmware/dmi-id.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Export SMBIOS/DMI info via sysfs to userspace
+ *
+ * Copyright 2007, Lennart Poettering
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+
+struct dmi_device_attribute{
+	struct device_attribute dev_attr;
+	int field;
+};
+#define to_dmi_dev_attr(_dev_attr) \
+	container_of(_dev_attr, struct dmi_device_attribute, dev_attr)
+
+static ssize_t sys_dmi_field_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *page)
+{
+	int field = to_dmi_dev_attr(attr)->field;
+	ssize_t len;
+	len = scnprintf(page, PAGE_SIZE, "%s\n", dmi_get_system_info(field));
+	page[len-1] = '\n';
+	return len;
+}
+
+#define DMI_ATTR(_name, _mode, _show, _field)			\
+	{ .dev_attr = __ATTR(_name, _mode, _show, NULL),	\
+	  .field = _field }
+
+#define DEFINE_DMI_ATTR_WITH_SHOW(_name, _mode, _field)		\
+static struct dmi_device_attribute sys_dmi_##_name##_attr =	\
+	DMI_ATTR(_name, _mode, sys_dmi_field_show, _field);
+
+DEFINE_DMI_ATTR_WITH_SHOW(bios_vendor,		0444, DMI_BIOS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_version,		0444, DMI_BIOS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_date,		0444, DMI_BIOS_DATE);
+DEFINE_DMI_ATTR_WITH_SHOW(sys_vendor,		0444, DMI_SYS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_release,		0444, DMI_BIOS_RELEASE);
+DEFINE_DMI_ATTR_WITH_SHOW(ec_firmware_release,	0444, DMI_EC_FIRMWARE_RELEASE);
+DEFINE_DMI_ATTR_WITH_SHOW(product_name,		0444, DMI_PRODUCT_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(product_version,	0444, DMI_PRODUCT_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(product_serial,	0400, DMI_PRODUCT_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(product_uuid,		0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(product_sku,		0444, DMI_PRODUCT_SKU);
+DEFINE_DMI_ATTR_WITH_SHOW(product_family,	0444, DMI_PRODUCT_FAMILY);
+DEFINE_DMI_ATTR_WITH_SHOW(board_vendor,		0444, DMI_BOARD_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(board_name,		0444, DMI_BOARD_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(board_version,	0444, DMI_BOARD_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(board_serial,		0400, DMI_BOARD_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(board_asset_tag,	0444, DMI_BOARD_ASSET_TAG);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_vendor,	0444, DMI_CHASSIS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_type,		0444, DMI_CHASSIS_TYPE);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_version,	0444, DMI_CHASSIS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_serial,	0400, DMI_CHASSIS_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_asset_tag,	0444, DMI_CHASSIS_ASSET_TAG);
+
+static void ascii_filter(char *d, const char *s)
+{
+	/* Filter out characters we don't want to see in the modalias string */
+	for (; *s; s++)
+		if (*s > ' ' && *s < 127 && *s != ':')
+			*(d++) = *s;
+
+	*d = 0;
+}
+
+static ssize_t get_modalias(char *buffer, size_t buffer_size)
+{
+	static const struct mafield {
+		const char *prefix;
+		int field;
+	} fields[] = {
+		{ "bvn", DMI_BIOS_VENDOR },
+		{ "bvr", DMI_BIOS_VERSION },
+		{ "bd",  DMI_BIOS_DATE },
+		{ "br",  DMI_BIOS_RELEASE },
+		{ "efr", DMI_EC_FIRMWARE_RELEASE },
+		{ "svn", DMI_SYS_VENDOR },
+		{ "pn",  DMI_PRODUCT_NAME },
+		{ "pvr", DMI_PRODUCT_VERSION },
+		{ "rvn", DMI_BOARD_VENDOR },
+		{ "rn",  DMI_BOARD_NAME },
+		{ "rvr", DMI_BOARD_VERSION },
+		{ "cvn", DMI_CHASSIS_VENDOR },
+		{ "ct",  DMI_CHASSIS_TYPE },
+		{ "cvr", DMI_CHASSIS_VERSION },
+		{ NULL,  DMI_NONE }
+	};
+
+	ssize_t l, left;
+	char *p;
+	const struct mafield *f;
+
+	strcpy(buffer, "dmi");
+	p = buffer + 3; left = buffer_size - 4;
+
+	for (f = fields; f->prefix && left > 0; f++) {
+		const char *c;
+		char *t;
+
+		c = dmi_get_system_info(f->field);
+		if (!c)
+			continue;
+
+		t = kmalloc(strlen(c) + 1, GFP_KERNEL);
+		if (!t)
+			break;
+		ascii_filter(t, c);
+		l = scnprintf(p, left, ":%s%s", f->prefix, t);
+		kfree(t);
+
+		p += l;
+		left -= l;
+	}
+
+	p[0] = ':';
+	p[1] = 0;
+
+	return p - buffer + 1;
+}
+
+static ssize_t sys_dmi_modalias_show(struct device *dev,
+				     struct device_attribute *attr, char *page)
+{
+	ssize_t r;
+	r = get_modalias(page, PAGE_SIZE-1);
+	page[r] = '\n';
+	page[r+1] = 0;
+	return r+1;
+}
+
+static struct device_attribute sys_dmi_modalias_attr =
+	__ATTR(modalias, 0444, sys_dmi_modalias_show, NULL);
+
+static struct attribute *sys_dmi_attributes[DMI_STRING_MAX+2];
+
+static struct attribute_group sys_dmi_attribute_group = {
+	.attrs = sys_dmi_attributes,
+};
+
+static const struct attribute_group* sys_dmi_attribute_groups[] = {
+	&sys_dmi_attribute_group,
+	NULL
+};
+
+static int dmi_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	ssize_t len;
+
+	if (add_uevent_var(env, "MODALIAS="))
+		return -ENOMEM;
+	len = get_modalias(&env->buf[env->buflen - 1],
+			   sizeof(env->buf) - env->buflen);
+	if (len >= (sizeof(env->buf) - env->buflen))
+		return -ENOMEM;
+	env->buflen += len;
+	return 0;
+}
+
+static struct class dmi_class = {
+	.name = "dmi",
+	.dev_release = (void(*)(struct device *)) kfree,
+	.dev_uevent = dmi_dev_uevent,
+};
+
+static struct device *dmi_dev;
+
+/* Initialization */
+
+#define ADD_DMI_ATTR(_name, _field) \
+	if (dmi_get_system_info(_field)) \
+		sys_dmi_attributes[i++] = &sys_dmi_##_name##_attr.dev_attr.attr;
+
+/* In a separate function to keep gcc 3.2 happy - do NOT merge this in
+   dmi_id_init! */
+static void __init dmi_id_init_attr_table(void)
+{
+	int i;
+
+	/* Not necessarily all DMI fields are available on all
+	 * systems, hence let's built an attribute table of just
+	 * what's available */
+	i = 0;
+	ADD_DMI_ATTR(bios_vendor,       DMI_BIOS_VENDOR);
+	ADD_DMI_ATTR(bios_version,      DMI_BIOS_VERSION);
+	ADD_DMI_ATTR(bios_date,         DMI_BIOS_DATE);
+	ADD_DMI_ATTR(bios_release,      DMI_BIOS_RELEASE);
+	ADD_DMI_ATTR(ec_firmware_release, DMI_EC_FIRMWARE_RELEASE);
+	ADD_DMI_ATTR(sys_vendor,        DMI_SYS_VENDOR);
+	ADD_DMI_ATTR(product_name,      DMI_PRODUCT_NAME);
+	ADD_DMI_ATTR(product_version,   DMI_PRODUCT_VERSION);
+	ADD_DMI_ATTR(product_serial,    DMI_PRODUCT_SERIAL);
+	ADD_DMI_ATTR(product_uuid,      DMI_PRODUCT_UUID);
+	ADD_DMI_ATTR(product_family,    DMI_PRODUCT_FAMILY);
+	ADD_DMI_ATTR(product_sku,       DMI_PRODUCT_SKU);
+	ADD_DMI_ATTR(board_vendor,      DMI_BOARD_VENDOR);
+	ADD_DMI_ATTR(board_name,        DMI_BOARD_NAME);
+	ADD_DMI_ATTR(board_version,     DMI_BOARD_VERSION);
+	ADD_DMI_ATTR(board_serial,      DMI_BOARD_SERIAL);
+	ADD_DMI_ATTR(board_asset_tag,   DMI_BOARD_ASSET_TAG);
+	ADD_DMI_ATTR(chassis_vendor,    DMI_CHASSIS_VENDOR);
+	ADD_DMI_ATTR(chassis_type,      DMI_CHASSIS_TYPE);
+	ADD_DMI_ATTR(chassis_version,   DMI_CHASSIS_VERSION);
+	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
+	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
+	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+}
+
+static int __init dmi_id_init(void)
+{
+	int ret;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	dmi_id_init_attr_table();
+
+	ret = class_register(&dmi_class);
+	if (ret)
+		return ret;
+
+	dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
+	if (!dmi_dev) {
+		ret = -ENOMEM;
+		goto fail_class_unregister;
+	}
+
+	dmi_dev->class = &dmi_class;
+	dev_set_name(dmi_dev, "id");
+	dmi_dev->groups = sys_dmi_attribute_groups;
+
+	ret = device_register(dmi_dev);
+	if (ret)
+		goto fail_put_dmi_dev;
+
+	return 0;
+
+fail_put_dmi_dev:
+	put_device(dmi_dev);
+
+fail_class_unregister:
+	class_unregister(&dmi_class);
+
+	return ret;
+}
+
+arch_initcall(dmi_id_init);
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
new file mode 100644
index 000000000..4a93fb490
--- /dev/null
+++ b/drivers/firmware/dmi-sysfs.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * dmi-sysfs.c
+ *
+ * This module exports the DMI tables read-only to userspace through the
+ * sysfs file system.
+ *
+ * Data is currently found below
+ *    /sys/firmware/dmi/...
+ *
+ * DMI attributes are presented in attribute files with names
+ * formatted using %d-%d, so that the first integer indicates the
+ * structure type (0-255), and the second field is the instance of that
+ * entry.
+ *
+ * Copyright 2011 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kobject.h>
+#include <linux/dmi.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <asm/dmi.h>
+
+#define MAX_ENTRY_TYPE 255 /* Most of these aren't used, but we consider
+			      the top entry type is only 8 bits */
+
+struct dmi_sysfs_entry {
+	struct dmi_header dh;
+	struct kobject kobj;
+	int instance;
+	int position;
+	struct list_head list;
+	struct kobject *child;
+};
+
+/*
+ * Global list of dmi_sysfs_entry.  Even though this should only be
+ * manipulated at setup and teardown, the lazy nature of the kobject
+ * system means we get lazy removes.
+ */
+static LIST_HEAD(entry_list);
+static DEFINE_SPINLOCK(entry_list_lock);
+
+/* dmi_sysfs_attribute - Top level attribute. used by all entries. */
+struct dmi_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct dmi_sysfs_entry *entry, char *buf);
+};
+
+#define DMI_SYSFS_ATTR(_entry, _name) \
+struct dmi_sysfs_attribute dmi_sysfs_attr_##_entry##_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = 0400}, \
+	.show = dmi_sysfs_##_entry##_##_name, \
+}
+
+/*
+ * dmi_sysfs_mapped_attribute - Attribute where we require the entry be
+ * mapped in.  Use in conjunction with dmi_sysfs_specialize_attr_ops.
+ */
+struct dmi_sysfs_mapped_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct dmi_sysfs_entry *entry,
+			const struct dmi_header *dh,
+			char *buf);
+};
+
+#define DMI_SYSFS_MAPPED_ATTR(_entry, _name) \
+struct dmi_sysfs_mapped_attribute dmi_sysfs_attr_##_entry##_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = 0400}, \
+	.show = dmi_sysfs_##_entry##_##_name, \
+}
+
+/*************************************************
+ * Generic DMI entry support.
+ *************************************************/
+static void dmi_entry_free(struct kobject *kobj)
+{
+	kfree(kobj);
+}
+
+static struct dmi_sysfs_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct dmi_sysfs_entry, kobj);
+}
+
+static struct dmi_sysfs_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct dmi_sysfs_attribute, attr);
+}
+
+static ssize_t dmi_sysfs_attr_show(struct kobject *kobj,
+				   struct attribute *_attr, char *buf)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+	struct dmi_sysfs_attribute *attr = to_attr(_attr);
+
+	/* DMI stuff is only ever admin visible */
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops dmi_sysfs_attr_ops = {
+	.show = dmi_sysfs_attr_show,
+};
+
+typedef ssize_t (*dmi_callback)(struct dmi_sysfs_entry *,
+				const struct dmi_header *dh, void *);
+
+struct find_dmi_data {
+	struct dmi_sysfs_entry	*entry;
+	dmi_callback		callback;
+	void			*private;
+	int			instance_countdown;
+	ssize_t			ret;
+};
+
+static void find_dmi_entry_helper(const struct dmi_header *dh,
+				  void *_data)
+{
+	struct find_dmi_data *data = _data;
+	struct dmi_sysfs_entry *entry = data->entry;
+
+	/* Is this the entry we want? */
+	if (dh->type != entry->dh.type)
+		return;
+
+	if (data->instance_countdown != 0) {
+		/* try the next instance? */
+		data->instance_countdown--;
+		return;
+	}
+
+	/*
+	 * Don't ever revisit the instance.  Short circuit later
+	 * instances by letting the instance_countdown run negative
+	 */
+	data->instance_countdown--;
+
+	/* Found the entry */
+	data->ret = data->callback(entry, dh, data->private);
+}
+
+/* State for passing the read parameters through dmi_find_entry() */
+struct dmi_read_state {
+	char *buf;
+	loff_t pos;
+	size_t count;
+};
+
+static ssize_t find_dmi_entry(struct dmi_sysfs_entry *entry,
+			      dmi_callback callback, void *private)
+{
+	struct find_dmi_data data = {
+		.entry = entry,
+		.callback = callback,
+		.private = private,
+		.instance_countdown = entry->instance,
+		.ret = -EIO,  /* To signal the entry disappeared */
+	};
+	int ret;
+
+	ret = dmi_walk(find_dmi_entry_helper, &data);
+	/* This shouldn't happen, but just in case. */
+	if (ret)
+		return -EINVAL;
+	return data.ret;
+}
+
+/*
+ * Calculate and return the byte length of the dmi entry identified by
+ * dh.  This includes both the formatted portion as well as the
+ * unformatted string space, including the two trailing nul characters.
+ */
+static size_t dmi_entry_length(const struct dmi_header *dh)
+{
+	const char *p = (const char *)dh;
+
+	p += dh->length;
+
+	while (p[0] || p[1])
+		p++;
+
+	return 2 + p - (const char *)dh;
+}
+
+/*************************************************
+ * Support bits for specialized DMI entry support
+ *************************************************/
+struct dmi_entry_attr_show_data {
+	struct attribute *attr;
+	char *buf;
+};
+
+static ssize_t dmi_entry_attr_show_helper(struct dmi_sysfs_entry *entry,
+					  const struct dmi_header *dh,
+					  void *_data)
+{
+	struct dmi_entry_attr_show_data *data = _data;
+	struct dmi_sysfs_mapped_attribute *attr;
+
+	attr = container_of(data->attr,
+			    struct dmi_sysfs_mapped_attribute, attr);
+	return attr->show(entry, dh, data->buf);
+}
+
+static ssize_t dmi_entry_attr_show(struct kobject *kobj,
+				   struct attribute *attr,
+				   char *buf)
+{
+	struct dmi_entry_attr_show_data data = {
+		.attr = attr,
+		.buf  = buf,
+	};
+	/* Find the entry according to our parent and call the
+	 * normalized show method hanging off of the attribute */
+	return find_dmi_entry(to_entry(kobj->parent),
+			      dmi_entry_attr_show_helper, &data);
+}
+
+static const struct sysfs_ops dmi_sysfs_specialize_attr_ops = {
+	.show = dmi_entry_attr_show,
+};
+
+/*************************************************
+ * Specialized DMI entry support.
+ *************************************************/
+
+/*** Type 15 - System Event Table ***/
+
+#define DMI_SEL_ACCESS_METHOD_IO8	0x00
+#define DMI_SEL_ACCESS_METHOD_IO2x8	0x01
+#define DMI_SEL_ACCESS_METHOD_IO16	0x02
+#define DMI_SEL_ACCESS_METHOD_PHYS32	0x03
+#define DMI_SEL_ACCESS_METHOD_GPNV	0x04
+
+struct dmi_system_event_log {
+	struct dmi_header header;
+	u16	area_length;
+	u16	header_start_offset;
+	u16	data_start_offset;
+	u8	access_method;
+	u8	status;
+	u32	change_token;
+	union {
+		struct {
+			u16 index_addr;
+			u16 data_addr;
+		} io;
+		u32	phys_addr32;
+		u16	gpnv_handle;
+		u32	access_method_address;
+	};
+	u8	header_format;
+	u8	type_descriptors_supported_count;
+	u8	per_log_type_descriptor_length;
+	u8	supported_log_type_descriptos[];
+} __packed;
+
+#define DMI_SYSFS_SEL_FIELD(_field) \
+static ssize_t dmi_sysfs_sel_##_field(struct dmi_sysfs_entry *entry, \
+				      const struct dmi_header *dh, \
+				      char *buf) \
+{ \
+	struct dmi_system_event_log sel; \
+	if (sizeof(sel) > dmi_entry_length(dh)) \
+		return -EIO; \
+	memcpy(&sel, dh, sizeof(sel)); \
+	return sprintf(buf, "%u\n", sel._field); \
+} \
+static DMI_SYSFS_MAPPED_ATTR(sel, _field)
+
+DMI_SYSFS_SEL_FIELD(area_length);
+DMI_SYSFS_SEL_FIELD(header_start_offset);
+DMI_SYSFS_SEL_FIELD(data_start_offset);
+DMI_SYSFS_SEL_FIELD(access_method);
+DMI_SYSFS_SEL_FIELD(status);
+DMI_SYSFS_SEL_FIELD(change_token);
+DMI_SYSFS_SEL_FIELD(access_method_address);
+DMI_SYSFS_SEL_FIELD(header_format);
+DMI_SYSFS_SEL_FIELD(type_descriptors_supported_count);
+DMI_SYSFS_SEL_FIELD(per_log_type_descriptor_length);
+
+static struct attribute *dmi_sysfs_sel_attrs[] = {
+	&dmi_sysfs_attr_sel_area_length.attr,
+	&dmi_sysfs_attr_sel_header_start_offset.attr,
+	&dmi_sysfs_attr_sel_data_start_offset.attr,
+	&dmi_sysfs_attr_sel_access_method.attr,
+	&dmi_sysfs_attr_sel_status.attr,
+	&dmi_sysfs_attr_sel_change_token.attr,
+	&dmi_sysfs_attr_sel_access_method_address.attr,
+	&dmi_sysfs_attr_sel_header_format.attr,
+	&dmi_sysfs_attr_sel_type_descriptors_supported_count.attr,
+	&dmi_sysfs_attr_sel_per_log_type_descriptor_length.attr,
+	NULL,
+};
+
+
+static struct kobj_type dmi_system_event_log_ktype = {
+	.release = dmi_entry_free,
+	.sysfs_ops = &dmi_sysfs_specialize_attr_ops,
+	.default_attrs = dmi_sysfs_sel_attrs,
+};
+
+typedef u8 (*sel_io_reader)(const struct dmi_system_event_log *sel,
+			    loff_t offset);
+
+static DEFINE_MUTEX(io_port_lock);
+
+static u8 read_sel_8bit_indexed_io(const struct dmi_system_event_log *sel,
+				   loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outb((u8)offset, sel->io.index_addr);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static u8 read_sel_2x8bit_indexed_io(const struct dmi_system_event_log *sel,
+				     loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outb((u8)offset, sel->io.index_addr);
+	outb((u8)(offset >> 8), sel->io.index_addr + 1);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static u8 read_sel_16bit_indexed_io(const struct dmi_system_event_log *sel,
+				    loff_t offset)
+{
+	u8 ret;
+
+	mutex_lock(&io_port_lock);
+	outw((u16)offset, sel->io.index_addr);
+	ret = inb(sel->io.data_addr);
+	mutex_unlock(&io_port_lock);
+	return ret;
+}
+
+static sel_io_reader sel_io_readers[] = {
+	[DMI_SEL_ACCESS_METHOD_IO8]	= read_sel_8bit_indexed_io,
+	[DMI_SEL_ACCESS_METHOD_IO2x8]	= read_sel_2x8bit_indexed_io,
+	[DMI_SEL_ACCESS_METHOD_IO16]	= read_sel_16bit_indexed_io,
+};
+
+static ssize_t dmi_sel_raw_read_io(struct dmi_sysfs_entry *entry,
+				   const struct dmi_system_event_log *sel,
+				   char *buf, loff_t pos, size_t count)
+{
+	ssize_t wrote = 0;
+
+	sel_io_reader io_reader = sel_io_readers[sel->access_method];
+
+	while (count && pos < sel->area_length) {
+		count--;
+		*(buf++) = io_reader(sel, pos++);
+		wrote++;
+	}
+
+	return wrote;
+}
+
+static ssize_t dmi_sel_raw_read_phys32(struct dmi_sysfs_entry *entry,
+				       const struct dmi_system_event_log *sel,
+				       char *buf, loff_t pos, size_t count)
+{
+	u8 __iomem *mapped;
+	ssize_t wrote = 0;
+
+	mapped = dmi_remap(sel->access_method_address, sel->area_length);
+	if (!mapped)
+		return -EIO;
+
+	while (count && pos < sel->area_length) {
+		count--;
+		*(buf++) = readb(mapped + pos++);
+		wrote++;
+	}
+
+	dmi_unmap(mapped);
+	return wrote;
+}
+
+static ssize_t dmi_sel_raw_read_helper(struct dmi_sysfs_entry *entry,
+				       const struct dmi_header *dh,
+				       void *_state)
+{
+	struct dmi_read_state *state = _state;
+	struct dmi_system_event_log sel;
+
+	if (sizeof(sel) > dmi_entry_length(dh))
+		return -EIO;
+
+	memcpy(&sel, dh, sizeof(sel));
+
+	switch (sel.access_method) {
+	case DMI_SEL_ACCESS_METHOD_IO8:
+	case DMI_SEL_ACCESS_METHOD_IO2x8:
+	case DMI_SEL_ACCESS_METHOD_IO16:
+		return dmi_sel_raw_read_io(entry, &sel, state->buf,
+					   state->pos, state->count);
+	case DMI_SEL_ACCESS_METHOD_PHYS32:
+		return dmi_sel_raw_read_phys32(entry, &sel, state->buf,
+					       state->pos, state->count);
+	case DMI_SEL_ACCESS_METHOD_GPNV:
+		pr_info("dmi-sysfs: GPNV support missing.\n");
+		return -EIO;
+	default:
+		pr_info("dmi-sysfs: Unknown access method %02x\n",
+			sel.access_method);
+		return -EIO;
+	}
+}
+
+static ssize_t dmi_sel_raw_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t pos, size_t count)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj->parent);
+	struct dmi_read_state state = {
+		.buf = buf,
+		.pos = pos,
+		.count = count,
+	};
+
+	return find_dmi_entry(entry, dmi_sel_raw_read_helper, &state);
+}
+
+static struct bin_attribute dmi_sel_raw_attr = {
+	.attr = {.name = "raw_event_log", .mode = 0400},
+	.read = dmi_sel_raw_read,
+};
+
+static int dmi_system_event_log(struct dmi_sysfs_entry *entry)
+{
+	int ret;
+
+	entry->child = kzalloc(sizeof(*entry->child), GFP_KERNEL);
+	if (!entry->child)
+		return -ENOMEM;
+	ret = kobject_init_and_add(entry->child,
+				   &dmi_system_event_log_ktype,
+				   &entry->kobj,
+				   "system_event_log");
+	if (ret)
+		goto out_free;
+
+	ret = sysfs_create_bin_file(entry->child, &dmi_sel_raw_attr);
+	if (ret)
+		goto out_del;
+
+	return 0;
+
+out_del:
+	kobject_del(entry->child);
+out_free:
+	kfree(entry->child);
+	return ret;
+}
+
+/*************************************************
+ * Generic DMI entry support.
+ *************************************************/
+
+static ssize_t dmi_sysfs_entry_length(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.length);
+}
+
+static ssize_t dmi_sysfs_entry_handle(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.handle);
+}
+
+static ssize_t dmi_sysfs_entry_type(struct dmi_sysfs_entry *entry, char *buf)
+{
+	return sprintf(buf, "%d\n", entry->dh.type);
+}
+
+static ssize_t dmi_sysfs_entry_instance(struct dmi_sysfs_entry *entry,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", entry->instance);
+}
+
+static ssize_t dmi_sysfs_entry_position(struct dmi_sysfs_entry *entry,
+					char *buf)
+{
+	return sprintf(buf, "%d\n", entry->position);
+}
+
+static DMI_SYSFS_ATTR(entry, length);
+static DMI_SYSFS_ATTR(entry, handle);
+static DMI_SYSFS_ATTR(entry, type);
+static DMI_SYSFS_ATTR(entry, instance);
+static DMI_SYSFS_ATTR(entry, position);
+
+static struct attribute *dmi_sysfs_entry_attrs[] = {
+	&dmi_sysfs_attr_entry_length.attr,
+	&dmi_sysfs_attr_entry_handle.attr,
+	&dmi_sysfs_attr_entry_type.attr,
+	&dmi_sysfs_attr_entry_instance.attr,
+	&dmi_sysfs_attr_entry_position.attr,
+	NULL,
+};
+
+static ssize_t dmi_entry_raw_read_helper(struct dmi_sysfs_entry *entry,
+					 const struct dmi_header *dh,
+					 void *_state)
+{
+	struct dmi_read_state *state = _state;
+	size_t entry_length;
+
+	entry_length = dmi_entry_length(dh);
+
+	return memory_read_from_buffer(state->buf, state->count,
+				       &state->pos, dh, entry_length);
+}
+
+static ssize_t dmi_entry_raw_read(struct file *filp,
+				  struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t count)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+	struct dmi_read_state state = {
+		.buf = buf,
+		.pos = pos,
+		.count = count,
+	};
+
+	return find_dmi_entry(entry, dmi_entry_raw_read_helper, &state);
+}
+
+static const struct bin_attribute dmi_entry_raw_attr = {
+	.attr = {.name = "raw", .mode = 0400},
+	.read = dmi_entry_raw_read,
+};
+
+static void dmi_sysfs_entry_release(struct kobject *kobj)
+{
+	struct dmi_sysfs_entry *entry = to_entry(kobj);
+
+	spin_lock(&entry_list_lock);
+	list_del(&entry->list);
+	spin_unlock(&entry_list_lock);
+	kfree(entry);
+}
+
+static struct kobj_type dmi_sysfs_entry_ktype = {
+	.release = dmi_sysfs_entry_release,
+	.sysfs_ops = &dmi_sysfs_attr_ops,
+	.default_attrs = dmi_sysfs_entry_attrs,
+};
+
+static struct kset *dmi_kset;
+
+/* Global count of all instances seen.  Only for setup */
+static int __initdata instance_counts[MAX_ENTRY_TYPE + 1];
+
+/* Global positional count of all entries seen.  Only for setup */
+static int __initdata position_count;
+
+static void __init dmi_sysfs_register_handle(const struct dmi_header *dh,
+					     void *_ret)
+{
+	struct dmi_sysfs_entry *entry;
+	int *ret = _ret;
+
+	/* If a previous entry saw an error, short circuit */
+	if (*ret)
+		return;
+
+	/* Allocate and register a new entry into the entries set */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		*ret = -ENOMEM;
+		return;
+	}
+
+	/* Set the key */
+	memcpy(&entry->dh, dh, sizeof(*dh));
+	entry->instance = instance_counts[dh->type]++;
+	entry->position = position_count++;
+
+	entry->kobj.kset = dmi_kset;
+	*ret = kobject_init_and_add(&entry->kobj, &dmi_sysfs_entry_ktype, NULL,
+				    "%d-%d", dh->type, entry->instance);
+
+	if (*ret) {
+		kobject_put(&entry->kobj);
+		return;
+	}
+
+	/* Thread on the global list for cleanup */
+	spin_lock(&entry_list_lock);
+	list_add_tail(&entry->list, &entry_list);
+	spin_unlock(&entry_list_lock);
+
+	/* Handle specializations by type */
+	switch (dh->type) {
+	case DMI_ENTRY_SYSTEM_EVENT_LOG:
+		*ret = dmi_system_event_log(entry);
+		break;
+	default:
+		/* No specialization */
+		break;
+	}
+	if (*ret)
+		goto out_err;
+
+	/* Create the raw binary file to access the entry */
+	*ret = sysfs_create_bin_file(&entry->kobj, &dmi_entry_raw_attr);
+	if (*ret)
+		goto out_err;
+
+	return;
+out_err:
+	kobject_put(entry->child);
+	kobject_put(&entry->kobj);
+	return;
+}
+
+static void cleanup_entry_list(void)
+{
+	struct dmi_sysfs_entry *entry, *next;
+
+	/* No locks, we are on our way out */
+	list_for_each_entry_safe(entry, next, &entry_list, list) {
+		kobject_put(entry->child);
+		kobject_put(&entry->kobj);
+	}
+}
+
+static int __init dmi_sysfs_init(void)
+{
+	int error;
+	int val;
+
+	if (!dmi_kobj) {
+		pr_debug("dmi-sysfs: dmi entry is absent.\n");
+		error = -ENODATA;
+		goto err;
+	}
+
+	dmi_kset = kset_create_and_add("entries", NULL, dmi_kobj);
+	if (!dmi_kset) {
+		error = -ENOMEM;
+		goto err;
+	}
+
+	val = 0;
+	error = dmi_walk(dmi_sysfs_register_handle, &val);
+	if (error)
+		goto err;
+	if (val) {
+		error = val;
+		goto err;
+	}
+
+	pr_debug("dmi-sysfs: loaded.\n");
+
+	return 0;
+err:
+	cleanup_entry_list();
+	kset_unregister(dmi_kset);
+	return error;
+}
+
+/* clean up everything. */
+static void __exit dmi_sysfs_exit(void)
+{
+	pr_debug("dmi-sysfs: unloading.\n");
+	cleanup_entry_list();
+	kset_unregister(dmi_kset);
+}
+
+module_init(dmi_sysfs_init);
+module_exit(dmi_sysfs_exit);
+
+MODULE_AUTHOR("Mike Waychison <mikew@google.com>");
+MODULE_DESCRIPTION("DMI sysfs support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
new file mode 100644
index 000000000..d51ca0428
--- /dev/null
+++ b/drivers/firmware/dmi_scan.c
@@ -0,0 +1,1203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/memblock.h>
+#include <linux/random.h>
+#include <asm/dmi.h>
+#include <asm/unaligned.h>
+
+#ifndef SMBIOS_ENTRY_POINT_SCAN_START
+#define SMBIOS_ENTRY_POINT_SCAN_START 0xF0000
+#endif
+
+struct kobject *dmi_kobj;
+EXPORT_SYMBOL_GPL(dmi_kobj);
+
+/*
+ * DMI stands for "Desktop Management Interface".  It is part
+ * of and an antecedent to, SMBIOS, which stands for System
+ * Management BIOS.  See further: https://www.dmtf.org/standards
+ */
+static const char dmi_empty_string[] = "";
+
+static u32 dmi_ver __initdata;
+static u32 dmi_len;
+static u16 dmi_num;
+static u8 smbios_entry_point[32];
+static int smbios_entry_point_size;
+
+/* DMI system identification string used during boot */
+static char dmi_ids_string[128] __initdata;
+
+static struct dmi_memdev_info {
+	const char *device;
+	const char *bank;
+	u64 size;		/* bytes */
+	u16 handle;
+	u8 type;		/* DDR2, DDR3, DDR4 etc */
+} *dmi_memdev;
+static int dmi_memdev_nr;
+
+static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
+{
+	const u8 *bp = ((u8 *) dm) + dm->length;
+	const u8 *nsp;
+
+	if (s) {
+		while (--s > 0 && *bp)
+			bp += strlen(bp) + 1;
+
+		/* Strings containing only spaces are considered empty */
+		nsp = bp;
+		while (*nsp == ' ')
+			nsp++;
+		if (*nsp != '\0')
+			return bp;
+	}
+
+	return dmi_empty_string;
+}
+
+static const char * __init dmi_string(const struct dmi_header *dm, u8 s)
+{
+	const char *bp = dmi_string_nosave(dm, s);
+	char *str;
+	size_t len;
+
+	if (bp == dmi_empty_string)
+		return dmi_empty_string;
+
+	len = strlen(bp) + 1;
+	str = dmi_alloc(len);
+	if (str != NULL)
+		strcpy(str, bp);
+
+	return str;
+}
+
+/*
+ *	We have to be cautious here. We have seen BIOSes with DMI pointers
+ *	pointing to completely the wrong place for example
+ */
+static void dmi_decode_table(u8 *buf,
+			     void (*decode)(const struct dmi_header *, void *),
+			     void *private_data)
+{
+	u8 *data = buf;
+	int i = 0;
+
+	/*
+	 * Stop when we have seen all the items the table claimed to have
+	 * (SMBIOS < 3.0 only) OR we reach an end-of-table marker (SMBIOS
+	 * >= 3.0 only) OR we run off the end of the table (should never
+	 * happen but sometimes does on bogus implementations.)
+	 */
+	while ((!dmi_num || i < dmi_num) &&
+	       (data - buf + sizeof(struct dmi_header)) <= dmi_len) {
+		const struct dmi_header *dm = (const struct dmi_header *)data;
+
+		/*
+		 *  We want to know the total length (formatted area and
+		 *  strings) before decoding to make sure we won't run off the
+		 *  table in dmi_decode or dmi_string
+		 */
+		data += dm->length;
+		while ((data - buf < dmi_len - 1) && (data[0] || data[1]))
+			data++;
+		if (data - buf < dmi_len - 1)
+			decode(dm, private_data);
+
+		data += 2;
+		i++;
+
+		/*
+		 * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0]
+		 * For tables behind a 64-bit entry point, we have no item
+		 * count and no exact table length, so stop on end-of-table
+		 * marker. For tables behind a 32-bit entry point, we have
+		 * seen OEM structures behind the end-of-table marker on
+		 * some systems, so don't trust it.
+		 */
+		if (!dmi_num && dm->type == DMI_ENTRY_END_OF_TABLE)
+			break;
+	}
+
+	/* Trim DMI table length if needed */
+	if (dmi_len > data - buf)
+		dmi_len = data - buf;
+}
+
+static phys_addr_t dmi_base;
+
+static int __init dmi_walk_early(void (*decode)(const struct dmi_header *,
+		void *))
+{
+	u8 *buf;
+	u32 orig_dmi_len = dmi_len;
+
+	buf = dmi_early_remap(dmi_base, orig_dmi_len);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	dmi_decode_table(buf, decode, NULL);
+
+	add_device_randomness(buf, dmi_len);
+
+	dmi_early_unmap(buf, orig_dmi_len);
+	return 0;
+}
+
+static int __init dmi_checksum(const u8 *buf, u8 len)
+{
+	u8 sum = 0;
+	int a;
+
+	for (a = 0; a < len; a++)
+		sum += buf[a];
+
+	return sum == 0;
+}
+
+static const char *dmi_ident[DMI_STRING_MAX];
+static LIST_HEAD(dmi_devices);
+int dmi_available;
+
+/*
+ *	Save a DMI string
+ */
+static void __init dmi_save_ident(const struct dmi_header *dm, int slot,
+		int string)
+{
+	const char *d = (const char *) dm;
+	const char *p;
+
+	if (dmi_ident[slot] || dm->length <= string)
+		return;
+
+	p = dmi_string(dm, d[string]);
+	if (p == NULL)
+		return;
+
+	dmi_ident[slot] = p;
+}
+
+static void __init dmi_save_release(const struct dmi_header *dm, int slot,
+		int index)
+{
+	const u8 *minor, *major;
+	char *s;
+
+	/* If the table doesn't have the field, let's return */
+	if (dmi_ident[slot] || dm->length < index)
+		return;
+
+	minor = (u8 *) dm + index;
+	major = (u8 *) dm + index - 1;
+
+	/* As per the spec, if the system doesn't support this field,
+	 * the value is FF
+	 */
+	if (*major == 0xFF && *minor == 0xFF)
+		return;
+
+	s = dmi_alloc(8);
+	if (!s)
+		return;
+
+	sprintf(s, "%u.%u", *major, *minor);
+
+	dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_uuid(const struct dmi_header *dm, int slot,
+		int index)
+{
+	const u8 *d;
+	char *s;
+	int is_ff = 1, is_00 = 1, i;
+
+	if (dmi_ident[slot] || dm->length < index + 16)
+		return;
+
+	d = (u8 *) dm + index;
+	for (i = 0; i < 16 && (is_ff || is_00); i++) {
+		if (d[i] != 0x00)
+			is_00 = 0;
+		if (d[i] != 0xFF)
+			is_ff = 0;
+	}
+
+	if (is_ff || is_00)
+		return;
+
+	s = dmi_alloc(16*2+4+1);
+	if (!s)
+		return;
+
+	/*
+	 * As of version 2.6 of the SMBIOS specification, the first 3 fields of
+	 * the UUID are supposed to be little-endian encoded.  The specification
+	 * says that this is the defacto standard.
+	 */
+	if (dmi_ver >= 0x020600)
+		sprintf(s, "%pUl", d);
+	else
+		sprintf(s, "%pUb", d);
+
+	dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_type(const struct dmi_header *dm, int slot,
+		int index)
+{
+	const u8 *d;
+	char *s;
+
+	if (dmi_ident[slot] || dm->length <= index)
+		return;
+
+	s = dmi_alloc(4);
+	if (!s)
+		return;
+
+	d = (u8 *) dm + index;
+	sprintf(s, "%u", *d & 0x7F);
+	dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_one_device(int type, const char *name)
+{
+	struct dmi_device *dev;
+
+	/* No duplicate device */
+	if (dmi_find_device(type, name, NULL))
+		return;
+
+	dev = dmi_alloc(sizeof(*dev) + strlen(name) + 1);
+	if (!dev)
+		return;
+
+	dev->type = type;
+	strcpy((char *)(dev + 1), name);
+	dev->name = (char *)(dev + 1);
+	dev->device_data = NULL;
+	list_add(&dev->list, &dmi_devices);
+}
+
+static void __init dmi_save_devices(const struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+
+	for (i = 0; i < count; i++) {
+		const char *d = (char *)(dm + 1) + (i * 2);
+
+		/* Skip disabled device */
+		if ((*d & 0x80) == 0)
+			continue;
+
+		dmi_save_one_device(*d & 0x7f, dmi_string_nosave(dm, *(d + 1)));
+	}
+}
+
+static void __init dmi_save_oem_strings_devices(const struct dmi_header *dm)
+{
+	int i, count;
+	struct dmi_device *dev;
+
+	if (dm->length < 0x05)
+		return;
+
+	count = *(u8 *)(dm + 1);
+	for (i = 1; i <= count; i++) {
+		const char *devname = dmi_string(dm, i);
+
+		if (devname == dmi_empty_string)
+			continue;
+
+		dev = dmi_alloc(sizeof(*dev));
+		if (!dev)
+			break;
+
+		dev->type = DMI_DEV_TYPE_OEM_STRING;
+		dev->name = devname;
+		dev->device_data = NULL;
+
+		list_add(&dev->list, &dmi_devices);
+	}
+}
+
+static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
+{
+	struct dmi_device *dev;
+	void *data;
+
+	data = dmi_alloc(dm->length);
+	if (data == NULL)
+		return;
+
+	memcpy(data, dm, dm->length);
+
+	dev = dmi_alloc(sizeof(*dev));
+	if (!dev)
+		return;
+
+	dev->type = DMI_DEV_TYPE_IPMI;
+	dev->name = "IPMI controller";
+	dev->device_data = data;
+
+	list_add_tail(&dev->list, &dmi_devices);
+}
+
+static void __init dmi_save_dev_pciaddr(int instance, int segment, int bus,
+					int devfn, const char *name, int type)
+{
+	struct dmi_dev_onboard *dev;
+
+	/* Ignore invalid values */
+	if (type == DMI_DEV_TYPE_DEV_SLOT &&
+	    segment == 0xFFFF && bus == 0xFF && devfn == 0xFF)
+		return;
+
+	dev = dmi_alloc(sizeof(*dev) + strlen(name) + 1);
+	if (!dev)
+		return;
+
+	dev->instance = instance;
+	dev->segment = segment;
+	dev->bus = bus;
+	dev->devfn = devfn;
+
+	strcpy((char *)&dev[1], name);
+	dev->dev.type = type;
+	dev->dev.name = (char *)&dev[1];
+	dev->dev.device_data = dev;
+
+	list_add(&dev->dev.list, &dmi_devices);
+}
+
+static void __init dmi_save_extended_devices(const struct dmi_header *dm)
+{
+	const char *name;
+	const u8 *d = (u8 *)dm;
+
+	if (dm->length < 0x0B)
+		return;
+
+	/* Skip disabled device */
+	if ((d[0x5] & 0x80) == 0)
+		return;
+
+	name = dmi_string_nosave(dm, d[0x4]);
+	dmi_save_dev_pciaddr(d[0x6], *(u16 *)(d + 0x7), d[0x9], d[0xA], name,
+			     DMI_DEV_TYPE_DEV_ONBOARD);
+	dmi_save_one_device(d[0x5] & 0x7f, name);
+}
+
+static void __init dmi_save_system_slot(const struct dmi_header *dm)
+{
+	const u8 *d = (u8 *)dm;
+
+	/* Need SMBIOS 2.6+ structure */
+	if (dm->length < 0x11)
+		return;
+	dmi_save_dev_pciaddr(*(u16 *)(d + 0x9), *(u16 *)(d + 0xD), d[0xF],
+			     d[0x10], dmi_string_nosave(dm, d[0x4]),
+			     DMI_DEV_TYPE_DEV_SLOT);
+}
+
+static void __init count_mem_devices(const struct dmi_header *dm, void *v)
+{
+	if (dm->type != DMI_ENTRY_MEM_DEVICE)
+		return;
+	dmi_memdev_nr++;
+}
+
+static void __init save_mem_devices(const struct dmi_header *dm, void *v)
+{
+	const char *d = (const char *)dm;
+	static int nr;
+	u64 bytes;
+	u16 size;
+
+	if (dm->type != DMI_ENTRY_MEM_DEVICE || dm->length < 0x13)
+		return;
+	if (nr >= dmi_memdev_nr) {
+		pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n");
+		return;
+	}
+	dmi_memdev[nr].handle = get_unaligned(&dm->handle);
+	dmi_memdev[nr].device = dmi_string(dm, d[0x10]);
+	dmi_memdev[nr].bank = dmi_string(dm, d[0x11]);
+	dmi_memdev[nr].type = d[0x12];
+
+	size = get_unaligned((u16 *)&d[0xC]);
+	if (size == 0)
+		bytes = 0;
+	else if (size == 0xffff)
+		bytes = ~0ull;
+	else if (size & 0x8000)
+		bytes = (u64)(size & 0x7fff) << 10;
+	else if (size != 0x7fff || dm->length < 0x20)
+		bytes = (u64)size << 20;
+	else
+		bytes = (u64)get_unaligned((u32 *)&d[0x1C]) << 20;
+
+	dmi_memdev[nr].size = bytes;
+	nr++;
+}
+
+static void __init dmi_memdev_walk(void)
+{
+	if (dmi_walk_early(count_mem_devices) == 0 && dmi_memdev_nr) {
+		dmi_memdev = dmi_alloc(sizeof(*dmi_memdev) * dmi_memdev_nr);
+		if (dmi_memdev)
+			dmi_walk_early(save_mem_devices);
+	}
+}
+
+/*
+ *	Process a DMI table entry. Right now all we care about are the BIOS
+ *	and machine entries. For 2.5 we should pull the smbus controller info
+ *	out of here.
+ */
+static void __init dmi_decode(const struct dmi_header *dm, void *dummy)
+{
+	switch (dm->type) {
+	case 0:		/* BIOS Information */
+		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		dmi_save_release(dm, DMI_BIOS_RELEASE, 21);
+		dmi_save_release(dm, DMI_EC_FIRMWARE_RELEASE, 23);
+		break;
+	case 1:		/* System Information */
+		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
+		dmi_save_ident(dm, DMI_PRODUCT_SKU, 25);
+		dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26);
+		break;
+	case 2:		/* Base Board Information */
+		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		dmi_save_ident(dm, DMI_BOARD_SERIAL, 7);
+		dmi_save_ident(dm, DMI_BOARD_ASSET_TAG, 8);
+		break;
+	case 3:		/* Chassis Information */
+		dmi_save_ident(dm, DMI_CHASSIS_VENDOR, 4);
+		dmi_save_type(dm, DMI_CHASSIS_TYPE, 5);
+		dmi_save_ident(dm, DMI_CHASSIS_VERSION, 6);
+		dmi_save_ident(dm, DMI_CHASSIS_SERIAL, 7);
+		dmi_save_ident(dm, DMI_CHASSIS_ASSET_TAG, 8);
+		break;
+	case 9:		/* System Slots */
+		dmi_save_system_slot(dm);
+		break;
+	case 10:	/* Onboard Devices Information */
+		dmi_save_devices(dm);
+		break;
+	case 11:	/* OEM Strings */
+		dmi_save_oem_strings_devices(dm);
+		break;
+	case 38:	/* IPMI Device Information */
+		dmi_save_ipmi_device(dm);
+		break;
+	case 41:	/* Onboard Devices Extended Information */
+		dmi_save_extended_devices(dm);
+	}
+}
+
+static int __init print_filtered(char *buf, size_t len, const char *info)
+{
+	int c = 0;
+	const char *p;
+
+	if (!info)
+		return c;
+
+	for (p = info; *p; p++)
+		if (isprint(*p))
+			c += scnprintf(buf + c, len - c, "%c", *p);
+		else
+			c += scnprintf(buf + c, len - c, "\\x%02x", *p & 0xff);
+	return c;
+}
+
+static void __init dmi_format_ids(char *buf, size_t len)
+{
+	int c = 0;
+	const char *board;	/* Board Name is optional */
+
+	c += print_filtered(buf + c, len - c,
+			    dmi_get_system_info(DMI_SYS_VENDOR));
+	c += scnprintf(buf + c, len - c, " ");
+	c += print_filtered(buf + c, len - c,
+			    dmi_get_system_info(DMI_PRODUCT_NAME));
+
+	board = dmi_get_system_info(DMI_BOARD_NAME);
+	if (board) {
+		c += scnprintf(buf + c, len - c, "/");
+		c += print_filtered(buf + c, len - c, board);
+	}
+	c += scnprintf(buf + c, len - c, ", BIOS ");
+	c += print_filtered(buf + c, len - c,
+			    dmi_get_system_info(DMI_BIOS_VERSION));
+	c += scnprintf(buf + c, len - c, " ");
+	c += print_filtered(buf + c, len - c,
+			    dmi_get_system_info(DMI_BIOS_DATE));
+}
+
+/*
+ * Check for DMI/SMBIOS headers in the system firmware image.  Any
+ * SMBIOS header must start 16 bytes before the DMI header, so take a
+ * 32 byte buffer and check for DMI at offset 16 and SMBIOS at offset
+ * 0.  If the DMI header is present, set dmi_ver accordingly (SMBIOS
+ * takes precedence) and return 0.  Otherwise return 1.
+ */
+static int __init dmi_present(const u8 *buf)
+{
+	u32 smbios_ver;
+
+	if (memcmp(buf, "_SM_", 4) == 0 &&
+	    buf[5] < 32 && dmi_checksum(buf, buf[5])) {
+		smbios_ver = get_unaligned_be16(buf + 6);
+		smbios_entry_point_size = buf[5];
+		memcpy(smbios_entry_point, buf, smbios_entry_point_size);
+
+		/* Some BIOS report weird SMBIOS version, fix that up */
+		switch (smbios_ver) {
+		case 0x021F:
+		case 0x0221:
+			pr_debug("SMBIOS version fixup (2.%d->2.%d)\n",
+				 smbios_ver & 0xFF, 3);
+			smbios_ver = 0x0203;
+			break;
+		case 0x0233:
+			pr_debug("SMBIOS version fixup (2.%d->2.%d)\n", 51, 6);
+			smbios_ver = 0x0206;
+			break;
+		}
+	} else {
+		smbios_ver = 0;
+	}
+
+	buf += 16;
+
+	if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) {
+		if (smbios_ver)
+			dmi_ver = smbios_ver;
+		else
+			dmi_ver = (buf[14] & 0xF0) << 4 | (buf[14] & 0x0F);
+		dmi_ver <<= 8;
+		dmi_num = get_unaligned_le16(buf + 12);
+		dmi_len = get_unaligned_le16(buf + 6);
+		dmi_base = get_unaligned_le32(buf + 8);
+
+		if (dmi_walk_early(dmi_decode) == 0) {
+			if (smbios_ver) {
+				pr_info("SMBIOS %d.%d present.\n",
+					dmi_ver >> 16, (dmi_ver >> 8) & 0xFF);
+			} else {
+				smbios_entry_point_size = 15;
+				memcpy(smbios_entry_point, buf,
+				       smbios_entry_point_size);
+				pr_info("Legacy DMI %d.%d present.\n",
+					dmi_ver >> 16, (dmi_ver >> 8) & 0xFF);
+			}
+			dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string));
+			pr_info("DMI: %s\n", dmi_ids_string);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+/*
+ * Check for the SMBIOS 3.0 64-bit entry point signature. Unlike the legacy
+ * 32-bit entry point, there is no embedded DMI header (_DMI_) in here.
+ */
+static int __init dmi_smbios3_present(const u8 *buf)
+{
+	if (memcmp(buf, "_SM3_", 5) == 0 &&
+	    buf[6] < 32 && dmi_checksum(buf, buf[6])) {
+		dmi_ver = get_unaligned_be32(buf + 6) & 0xFFFFFF;
+		dmi_num = 0;			/* No longer specified */
+		dmi_len = get_unaligned_le32(buf + 12);
+		dmi_base = get_unaligned_le64(buf + 16);
+		smbios_entry_point_size = buf[6];
+		memcpy(smbios_entry_point, buf, smbios_entry_point_size);
+
+		if (dmi_walk_early(dmi_decode) == 0) {
+			pr_info("SMBIOS %d.%d.%d present.\n",
+				dmi_ver >> 16, (dmi_ver >> 8) & 0xFF,
+				dmi_ver & 0xFF);
+			dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string));
+			pr_info("DMI: %s\n", dmi_ids_string);
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static void __init dmi_scan_machine(void)
+{
+	char __iomem *p, *q;
+	char buf[32];
+
+	if (efi_enabled(EFI_CONFIG_TABLES)) {
+		/*
+		 * According to the DMTF SMBIOS reference spec v3.0.0, it is
+		 * allowed to define both the 64-bit entry point (smbios3) and
+		 * the 32-bit entry point (smbios), in which case they should
+		 * either both point to the same SMBIOS structure table, or the
+		 * table pointed to by the 64-bit entry point should contain a
+		 * superset of the table contents pointed to by the 32-bit entry
+		 * point (section 5.2)
+		 * This implies that the 64-bit entry point should have
+		 * precedence if it is defined and supported by the OS. If we
+		 * have the 64-bit entry point, but fail to decode it, fall
+		 * back to the legacy one (if available)
+		 */
+		if (efi.smbios3 != EFI_INVALID_TABLE_ADDR) {
+			p = dmi_early_remap(efi.smbios3, 32);
+			if (p == NULL)
+				goto error;
+			memcpy_fromio(buf, p, 32);
+			dmi_early_unmap(p, 32);
+
+			if (!dmi_smbios3_present(buf)) {
+				dmi_available = 1;
+				return;
+			}
+		}
+		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
+			goto error;
+
+		/* This is called as a core_initcall() because it isn't
+		 * needed during early boot.  This also means we can
+		 * iounmap the space when we're done with it.
+		 */
+		p = dmi_early_remap(efi.smbios, 32);
+		if (p == NULL)
+			goto error;
+		memcpy_fromio(buf, p, 32);
+		dmi_early_unmap(p, 32);
+
+		if (!dmi_present(buf)) {
+			dmi_available = 1;
+			return;
+		}
+	} else if (IS_ENABLED(CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK)) {
+		p = dmi_early_remap(SMBIOS_ENTRY_POINT_SCAN_START, 0x10000);
+		if (p == NULL)
+			goto error;
+
+		/*
+		 * Same logic as above, look for a 64-bit entry point
+		 * first, and if not found, fall back to 32-bit entry point.
+		 */
+		memcpy_fromio(buf, p, 16);
+		for (q = p + 16; q < p + 0x10000; q += 16) {
+			memcpy_fromio(buf + 16, q, 16);
+			if (!dmi_smbios3_present(buf)) {
+				dmi_available = 1;
+				dmi_early_unmap(p, 0x10000);
+				return;
+			}
+			memcpy(buf, buf + 16, 16);
+		}
+
+		/*
+		 * Iterate over all possible DMI header addresses q.
+		 * Maintain the 32 bytes around q in buf.  On the
+		 * first iteration, substitute zero for the
+		 * out-of-range bytes so there is no chance of falsely
+		 * detecting an SMBIOS header.
+		 */
+		memset(buf, 0, 16);
+		for (q = p; q < p + 0x10000; q += 16) {
+			memcpy_fromio(buf + 16, q, 16);
+			if (!dmi_present(buf)) {
+				dmi_available = 1;
+				dmi_early_unmap(p, 0x10000);
+				return;
+			}
+			memcpy(buf, buf + 16, 16);
+		}
+		dmi_early_unmap(p, 0x10000);
+	}
+ error:
+	pr_info("DMI not present or invalid.\n");
+}
+
+static ssize_t raw_table_read(struct file *file, struct kobject *kobj,
+			      struct bin_attribute *attr, char *buf,
+			      loff_t pos, size_t count)
+{
+	memcpy(buf, attr->private + pos, count);
+	return count;
+}
+
+static BIN_ATTR(smbios_entry_point, S_IRUSR, raw_table_read, NULL, 0);
+static BIN_ATTR(DMI, S_IRUSR, raw_table_read, NULL, 0);
+
+static int __init dmi_init(void)
+{
+	struct kobject *tables_kobj;
+	u8 *dmi_table;
+	int ret = -ENOMEM;
+
+	if (!dmi_available)
+		return 0;
+
+	/*
+	 * Set up dmi directory at /sys/firmware/dmi. This entry should stay
+	 * even after farther error, as it can be used by other modules like
+	 * dmi-sysfs.
+	 */
+	dmi_kobj = kobject_create_and_add("dmi", firmware_kobj);
+	if (!dmi_kobj)
+		goto err;
+
+	tables_kobj = kobject_create_and_add("tables", dmi_kobj);
+	if (!tables_kobj)
+		goto err;
+
+	dmi_table = dmi_remap(dmi_base, dmi_len);
+	if (!dmi_table)
+		goto err_tables;
+
+	bin_attr_smbios_entry_point.size = smbios_entry_point_size;
+	bin_attr_smbios_entry_point.private = smbios_entry_point;
+	ret = sysfs_create_bin_file(tables_kobj, &bin_attr_smbios_entry_point);
+	if (ret)
+		goto err_unmap;
+
+	bin_attr_DMI.size = dmi_len;
+	bin_attr_DMI.private = dmi_table;
+	ret = sysfs_create_bin_file(tables_kobj, &bin_attr_DMI);
+	if (!ret)
+		return 0;
+
+	sysfs_remove_bin_file(tables_kobj,
+			      &bin_attr_smbios_entry_point);
+ err_unmap:
+	dmi_unmap(dmi_table);
+ err_tables:
+	kobject_del(tables_kobj);
+	kobject_put(tables_kobj);
+ err:
+	pr_err("dmi: Firmware registration failed.\n");
+
+	return ret;
+}
+subsys_initcall(dmi_init);
+
+/**
+ *	dmi_setup - scan and setup DMI system information
+ *
+ *	Scan the DMI system information. This setups DMI identifiers
+ *	(dmi_system_id) for printing it out on task dumps and prepares
+ *	DIMM entry information (dmi_memdev_info) from the SMBIOS table
+ *	for using this when reporting memory errors.
+ */
+void __init dmi_setup(void)
+{
+	dmi_scan_machine();
+	if (!dmi_available)
+		return;
+
+	dmi_memdev_walk();
+	dump_stack_set_arch_desc("%s", dmi_ids_string);
+}
+
+/**
+ *	dmi_matches - check if dmi_system_id structure matches system DMI data
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+		int s = dmi->matches[i].slot;
+		if (s == DMI_NONE)
+			break;
+		if (s == DMI_OEM_STRING) {
+			/* DMI_OEM_STRING must be exact match */
+			const struct dmi_device *valid;
+
+			valid = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
+						dmi->matches[i].substr, NULL);
+			if (valid)
+				continue;
+		} else if (dmi_ident[s]) {
+			if (dmi->matches[i].exact_match) {
+				if (!strcmp(dmi_ident[s],
+					    dmi->matches[i].substr))
+					continue;
+			} else {
+				if (strstr(dmi_ident[s],
+					   dmi->matches[i].substr))
+					continue;
+			}
+		}
+
+		/* No match */
+		return false;
+	}
+	return true;
+}
+
+/**
+ *	dmi_is_end_of_table - check for end-of-table marker
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)
+{
+	return dmi->matches[0].slot == DMI_NONE;
+}
+
+/**
+ *	dmi_check_system - check system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table running matching functions until someone
+ *	returns non zero or we hit the end. Callback function is called for
+ *	each successful match. Returns the number of matches.
+ *
+ *	dmi_setup must be called before this function is called.
+ */
+int dmi_check_system(const struct dmi_system_id *list)
+{
+	int count = 0;
+	const struct dmi_system_id *d;
+
+	for (d = list; !dmi_is_end_of_table(d); d++)
+		if (dmi_matches(d)) {
+			count++;
+			if (d->callback && d->callback(d))
+				break;
+		}
+
+	return count;
+}
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ *	dmi_first_match - find dmi_system_id structure matching system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table until the first match is found.  Return the
+ *	pointer to the matching entry or NULL if there's no match.
+ *
+ *	dmi_setup must be called before this function is called.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+	const struct dmi_system_id *d;
+
+	for (d = list; !dmi_is_end_of_table(d); d++)
+		if (dmi_matches(d))
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
+ *	dmi_get_system_info - return DMI data value
+ *	@field: data index (see enum dmi_field)
+ *
+ *	Returns one DMI data value, can be used to perform
+ *	complex DMI data checks.
+ */
+const char *dmi_get_system_info(int field)
+{
+	return dmi_ident[field];
+}
+EXPORT_SYMBOL(dmi_get_system_info);
+
+/**
+ * dmi_name_in_serial - Check if string is in the DMI product serial information
+ * @str: string to check for
+ */
+int dmi_name_in_serial(const char *str)
+{
+	int f = DMI_PRODUCT_SERIAL;
+	if (dmi_ident[f] && strstr(dmi_ident[f], str))
+		return 1;
+	return 0;
+}
+
+/**
+ *	dmi_name_in_vendors - Check if string is in the DMI system or board vendor name
+ *	@str: Case sensitive Name
+ */
+int dmi_name_in_vendors(const char *str)
+{
+	static int fields[] = { DMI_SYS_VENDOR, DMI_BOARD_VENDOR, DMI_NONE };
+	int i;
+	for (i = 0; fields[i] != DMI_NONE; i++) {
+		int f = fields[i];
+		if (dmi_ident[f] && strstr(dmi_ident[f], str))
+			return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(dmi_name_in_vendors);
+
+/**
+ *	dmi_find_device - find onboard device by type/name
+ *	@type: device type or %DMI_DEV_TYPE_ANY to match all device types
+ *	@name: device name string or %NULL to match all
+ *	@from: previous device found in search, or %NULL for new search.
+ *
+ *	Iterates through the list of known onboard devices. If a device is
+ *	found with a matching @type and @name, a pointer to its device
+ *	structure is returned.  Otherwise, %NULL is returned.
+ *	A new search is initiated by passing %NULL as the @from argument.
+ *	If @from is not %NULL, searches continue from next device.
+ */
+const struct dmi_device *dmi_find_device(int type, const char *name,
+				    const struct dmi_device *from)
+{
+	const struct list_head *head = from ? &from->list : &dmi_devices;
+	struct list_head *d;
+
+	for (d = head->next; d != &dmi_devices; d = d->next) {
+		const struct dmi_device *dev =
+			list_entry(d, struct dmi_device, list);
+
+		if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
+		    ((name == NULL) || (strcmp(dev->name, name) == 0)))
+			return dev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_find_device);
+
+/**
+ *	dmi_get_date - parse a DMI date
+ *	@field:	data index (see enum dmi_field)
+ *	@yearp: optional out parameter for the year
+ *	@monthp: optional out parameter for the month
+ *	@dayp: optional out parameter for the day
+ *
+ *	The date field is assumed to be in the form resembling
+ *	[mm[/dd]]/yy[yy] and the result is stored in the out
+ *	parameters any or all of which can be omitted.
+ *
+ *	If the field doesn't exist, all out parameters are set to zero
+ *	and false is returned.  Otherwise, true is returned with any
+ *	invalid part of date set to zero.
+ *
+ *	On return, year, month and day are guaranteed to be in the
+ *	range of [0,9999], [0,12] and [0,31] respectively.
+ */
+bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
+{
+	int year = 0, month = 0, day = 0;
+	bool exists;
+	const char *s, *y;
+	char *e;
+
+	s = dmi_get_system_info(field);
+	exists = s;
+	if (!exists)
+		goto out;
+
+	/*
+	 * Determine year first.  We assume the date string resembles
+	 * mm/dd/yy[yy] but the original code extracted only the year
+	 * from the end.  Keep the behavior in the spirit of no
+	 * surprises.
+	 */
+	y = strrchr(s, '/');
+	if (!y)
+		goto out;
+
+	y++;
+	year = simple_strtoul(y, &e, 10);
+	if (y != e && year < 100) {	/* 2-digit year */
+		year += 1900;
+		if (year < 1996)	/* no dates < spec 1.0 */
+			year += 100;
+	}
+	if (year > 9999)		/* year should fit in %04d */
+		year = 0;
+
+	/* parse the mm and dd */
+	month = simple_strtoul(s, &e, 10);
+	if (s == e || *e != '/' || !month || month > 12) {
+		month = 0;
+		goto out;
+	}
+
+	s = e + 1;
+	day = simple_strtoul(s, &e, 10);
+	if (s == y || s == e || *e != '/' || day > 31)
+		day = 0;
+out:
+	if (yearp)
+		*yearp = year;
+	if (monthp)
+		*monthp = month;
+	if (dayp)
+		*dayp = day;
+	return exists;
+}
+EXPORT_SYMBOL(dmi_get_date);
+
+/**
+ *	dmi_get_bios_year - get a year out of DMI_BIOS_DATE field
+ *
+ *	Returns year on success, -ENXIO if DMI is not selected,
+ *	or a different negative error code if DMI field is not present
+ *	or not parseable.
+ */
+int dmi_get_bios_year(void)
+{
+	bool exists;
+	int year;
+
+	exists = dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL);
+	if (!exists)
+		return -ENODATA;
+
+	return year ? year : -ERANGE;
+}
+EXPORT_SYMBOL(dmi_get_bios_year);
+
+/**
+ *	dmi_walk - Walk the DMI table and get called back for every record
+ *	@decode: Callback function
+ *	@private_data: Private data to be passed to the callback function
+ *
+ *	Returns 0 on success, -ENXIO if DMI is not selected or not present,
+ *	or a different negative error code if DMI walking fails.
+ */
+int dmi_walk(void (*decode)(const struct dmi_header *, void *),
+	     void *private_data)
+{
+	u8 *buf;
+
+	if (!dmi_available)
+		return -ENXIO;
+
+	buf = dmi_remap(dmi_base, dmi_len);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	dmi_decode_table(buf, decode, private_data);
+
+	dmi_unmap(buf);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dmi_walk);
+
+/**
+ * dmi_match - compare a string to the dmi field (if exists)
+ * @f: DMI field identifier
+ * @str: string to compare the DMI field to
+ *
+ * Returns true if the requested field equals to the str (including NULL).
+ */
+bool dmi_match(enum dmi_field f, const char *str)
+{
+	const char *info = dmi_get_system_info(f);
+
+	if (info == NULL || str == NULL)
+		return info == str;
+
+	return !strcmp(info, str);
+}
+EXPORT_SYMBOL_GPL(dmi_match);
+
+void dmi_memdev_name(u16 handle, const char **bank, const char **device)
+{
+	int n;
+
+	if (dmi_memdev == NULL)
+		return;
+
+	for (n = 0; n < dmi_memdev_nr; n++) {
+		if (handle == dmi_memdev[n].handle) {
+			*bank = dmi_memdev[n].bank;
+			*device = dmi_memdev[n].device;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(dmi_memdev_name);
+
+u64 dmi_memdev_size(u16 handle)
+{
+	int n;
+
+	if (dmi_memdev) {
+		for (n = 0; n < dmi_memdev_nr; n++) {
+			if (handle == dmi_memdev[n].handle)
+				return dmi_memdev[n].size;
+		}
+	}
+	return ~0ull;
+}
+EXPORT_SYMBOL_GPL(dmi_memdev_size);
+
+/**
+ * dmi_memdev_type - get the memory type
+ * @handle: DMI structure handle
+ *
+ * Return the DMI memory type of the module in the slot associated with the
+ * given DMI handle, or 0x0 if no such DMI handle exists.
+ */
+u8 dmi_memdev_type(u16 handle)
+{
+	int n;
+
+	if (dmi_memdev) {
+		for (n = 0; n < dmi_memdev_nr; n++) {
+			if (handle == dmi_memdev[n].handle)
+				return dmi_memdev[n].type;
+		}
+	}
+	return 0x0;	/* Not a valid value */
+}
+EXPORT_SYMBOL_GPL(dmi_memdev_type);
+
+/**
+ *	dmi_memdev_handle - get the DMI handle of a memory slot
+ *	@slot: slot number
+ *
+ *	Return the DMI handle associated with a given memory slot, or %0xFFFF
+ *      if there is no such slot.
+ */
+u16 dmi_memdev_handle(int slot)
+{
+	if (dmi_memdev && slot >= 0 && slot < dmi_memdev_nr)
+		return dmi_memdev[slot].handle;
+
+	return 0xffff;	/* Not a valid value */
+}
+EXPORT_SYMBOL_GPL(dmi_memdev_handle);
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
new file mode 100644
index 000000000..14d0970a7
--- /dev/null
+++ b/drivers/firmware/edd.c
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/firmware/edd.c
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *  disk signature by Matt Domsch, Andrew Wilks, and Sandeep K. Shandilya
+ *  legacy CHS by Patrick J. LoPresti <patl@users.sourceforge.net>
+ *
+ * BIOS Enhanced Disk Drive Services (EDD)
+ * conformant to T13 Committee www.t13.org
+ *   projects 1572D, 1484D, 1386D, 1226DT
+ *
+ * This code takes information provided by BIOS EDD calls
+ * fn41 - Check Extensions Present and
+ * fn48 - Get Device Parameters with EDD extensions
+ * made in setup.S, copied to safe structures in setup.c,
+ * and presents it in sysfs.
+ *
+ * Please see http://linux.dell.com/edd/results.html for
+ * the list of BIOSs which have been reported to implement EDD.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
+#include <linux/limits.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/edd.h>
+
+#define EDD_VERSION "0.16"
+#define EDD_DATE    "2004-Jun-25"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to BIOS EDD information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EDD_VERSION);
+
+#define left (PAGE_SIZE - (p - buf) - 1)
+
+struct edd_device {
+	unsigned int index;
+	unsigned int mbr_signature;
+	struct edd_info *info;
+	struct kobject kobj;
+};
+
+struct edd_attribute {
+	struct attribute attr;
+	ssize_t(*show) (struct edd_device * edev, char *buf);
+	int (*test) (struct edd_device * edev);
+};
+
+/* forward declarations */
+static int edd_dev_is_type(struct edd_device *edev, const char *type);
+static struct pci_dev *edd_get_pci_dev(struct edd_device *edev);
+
+static struct edd_device *edd_devices[EDD_MBR_SIG_MAX];
+
+#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
+struct edd_attribute edd_attr_##_name = { 	\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,				\
+	.test	= _test,				\
+};
+
+static int
+edd_has_mbr_signature(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.mbr_signature_nr, EDD_MBR_SIG_MAX);
+}
+
+static int
+edd_has_edd_info(struct edd_device *edev)
+{
+	return edev->index < min_t(unsigned char, edd.edd_info_nr, EDDMAXNR);
+}
+
+static inline struct edd_info *
+edd_dev_get_info(struct edd_device *edev)
+{
+	return edev->info;
+}
+
+static inline void
+edd_dev_set_info(struct edd_device *edev, int i)
+{
+	edev->index = i;
+	if (edd_has_mbr_signature(edev))
+		edev->mbr_signature = edd.mbr_signature[i];
+	if (edd_has_edd_info(edev))
+		edev->info = &edd.edd_info[i];
+}
+
+#define to_edd_attr(_attr) container_of(_attr,struct edd_attribute,attr)
+#define to_edd_device(obj) container_of(obj,struct edd_device,kobj)
+
+static ssize_t
+edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf)
+{
+	struct edd_device *dev = to_edd_device(kobj);
+	struct edd_attribute *edd_attr = to_edd_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (edd_attr->show)
+		ret = edd_attr->show(dev, buf);
+	return ret;
+}
+
+static const struct sysfs_ops edd_attr_ops = {
+	.show = edd_attr_show,
+};
+
+static ssize_t
+edd_show_host_bus(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 4; i++) {
+		if (isprint(info->params.host_bus_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.host_bus_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+
+	if (!strncmp(info->params.host_bus_type, "ISA", 3)) {
+		p += scnprintf(p, left, "\tbase_address: %x\n",
+			     info->params.interface_path.isa.base_address);
+	} else if (!strncmp(info->params.host_bus_type, "PCIX", 4) ||
+		   !strncmp(info->params.host_bus_type, "PCI", 3) ||
+		   !strncmp(info->params.host_bus_type, "XPRS", 4)) {
+		p += scnprintf(p, left,
+			     "\t%02x:%02x.%d  channel: %u\n",
+			     info->params.interface_path.pci.bus,
+			     info->params.interface_path.pci.slot,
+			     info->params.interface_path.pci.function,
+			     info->params.interface_path.pci.channel);
+	} else if (!strncmp(info->params.host_bus_type, "IBND", 4) ||
+		   !strncmp(info->params.host_bus_type, "HTPT", 4)) {
+		p += scnprintf(p, left,
+			     "\tTBD: %llx\n",
+			     info->params.interface_path.ibnd.reserved);
+
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx\n",
+			     info->params.interface_path.unknown.reserved);
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_interface(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	int i;
+
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	for (i = 0; i < 8; i++) {
+		if (isprint(info->params.interface_type[i])) {
+			p += scnprintf(p, left, "%c", info->params.interface_type[i]);
+		} else {
+			p += scnprintf(p, left, " ");
+		}
+	}
+	if (!strncmp(info->params.interface_type, "ATAPI", 5)) {
+		p += scnprintf(p, left, "\tdevice: %u  lun: %u\n",
+			     info->params.device_path.atapi.device,
+			     info->params.device_path.atapi.lun);
+	} else if (!strncmp(info->params.interface_type, "ATA", 3)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.ata.device);
+	} else if (!strncmp(info->params.interface_type, "SCSI", 4)) {
+		p += scnprintf(p, left, "\tid: %u  lun: %llu\n",
+			     info->params.device_path.scsi.id,
+			     info->params.device_path.scsi.lun);
+	} else if (!strncmp(info->params.interface_type, "USB", 3)) {
+		p += scnprintf(p, left, "\tserial_number: %llx\n",
+			     info->params.device_path.usb.serial_number);
+	} else if (!strncmp(info->params.interface_type, "1394", 4)) {
+		p += scnprintf(p, left, "\teui: %llx\n",
+			     info->params.device_path.i1394.eui);
+	} else if (!strncmp(info->params.interface_type, "FIBRE", 5)) {
+		p += scnprintf(p, left, "\twwid: %llx lun: %llx\n",
+			     info->params.device_path.fibre.wwid,
+			     info->params.device_path.fibre.lun);
+	} else if (!strncmp(info->params.interface_type, "I2O", 3)) {
+		p += scnprintf(p, left, "\tidentity_tag: %llx\n",
+			     info->params.device_path.i2o.identity_tag);
+	} else if (!strncmp(info->params.interface_type, "RAID", 4)) {
+		p += scnprintf(p, left, "\tidentity_tag: %x\n",
+			     info->params.device_path.raid.array_number);
+	} else if (!strncmp(info->params.interface_type, "SATA", 4)) {
+		p += scnprintf(p, left, "\tdevice: %u\n",
+			     info->params.device_path.sata.device);
+	} else {
+		p += scnprintf(p, left, "\tunknown: %llx %llx\n",
+			     info->params.device_path.unknown.reserved1,
+			     info->params.device_path.unknown.reserved2);
+	}
+
+	return (p - buf);
+}
+
+/**
+ * edd_show_raw_data() - copies raw data to buffer for userspace to parse
+ * @edev: target edd_device
+ * @buf: output buffer
+ *
+ * Returns: number of bytes written, or -EINVAL on failure
+ */
+static ssize_t
+edd_show_raw_data(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	ssize_t len = sizeof (info->params);
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE))
+		len = info->params.length;
+
+	/* In case of buggy BIOSs */
+	if (len > (sizeof(info->params)))
+		len = sizeof(info->params);
+
+	memcpy(buf, &info->params, len);
+	return len;
+}
+
+static ssize_t
+edd_show_version(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "0x%02x\n", info->version);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_mbr_signature(struct edd_device *edev, char *buf)
+{
+	char *p = buf;
+	p += scnprintf(p, left, "0x%08x\n", edev->mbr_signature);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_extensions(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->interface_support & EDD_EXT_FIXED_DISK_ACCESS) {
+		p += scnprintf(p, left, "Fixed disk access\n");
+	}
+	if (info->interface_support & EDD_EXT_DEVICE_LOCKING_AND_EJECTING) {
+		p += scnprintf(p, left, "Device locking and ejecting\n");
+	}
+	if (info->interface_support & EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT) {
+		p += scnprintf(p, left, "Enhanced Disk Drive support\n");
+	}
+	if (info->interface_support & EDD_EXT_64BIT_EXTENSIONS) {
+		p += scnprintf(p, left, "64-bit extensions\n");
+	}
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_info_flags(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	if (info->params.info_flags & EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT)
+		p += scnprintf(p, left, "DMA boundary error transparent\n");
+	if (info->params.info_flags & EDD_INFO_GEOMETRY_VALID)
+		p += scnprintf(p, left, "geometry valid\n");
+	if (info->params.info_flags & EDD_INFO_REMOVABLE)
+		p += scnprintf(p, left, "removable\n");
+	if (info->params.info_flags & EDD_INFO_WRITE_VERIFY)
+		p += scnprintf(p, left, "write verify\n");
+	if (info->params.info_flags & EDD_INFO_MEDIA_CHANGE_NOTIFICATION)
+		p += scnprintf(p, left, "media change notification\n");
+	if (info->params.info_flags & EDD_INFO_LOCKABLE)
+		p += scnprintf(p, left, "lockable\n");
+	if (info->params.info_flags & EDD_INFO_NO_MEDIA_PRESENT)
+		p += scnprintf(p, left, "no media present\n");
+	if (info->params.info_flags & EDD_INFO_USE_INT13_FN50)
+		p += scnprintf(p, left, "use int13 fn50\n");
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_cylinder(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->legacy_max_cylinder);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_max_head(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->legacy_max_head);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_legacy_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->legacy_sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_cylinders(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_cylinders);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_heads(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.num_default_heads);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_default_sectors_per_track(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%u\n", info->params.sectors_per_track);
+	return (p - buf);
+}
+
+static ssize_t
+edd_show_sectors(struct edd_device *edev, char *buf)
+{
+	struct edd_info *info;
+	char *p = buf;
+	if (!edev)
+		return -EINVAL;
+	info = edd_dev_get_info(edev);
+	if (!info || !buf)
+		return -EINVAL;
+
+	p += scnprintf(p, left, "%llu\n", info->params.number_of_sectors);
+	return (p - buf);
+}
+
+
+/*
+ * Some device instances may not have all the above attributes,
+ * or the attribute values may be meaningless (i.e. if
+ * the device is < EDD 3.0, it won't have host_bus and interface
+ * information), so don't bother making files for them.  Likewise
+ * if the default_{cylinders,heads,sectors_per_track} values
+ * are zero, the BIOS doesn't provide sane values, don't bother
+ * creating files for them either.
+ */
+
+static int
+edd_has_legacy_max_cylinder(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_cylinder > 0;
+}
+
+static int
+edd_has_legacy_max_head(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_max_head > 0;
+}
+
+static int
+edd_has_legacy_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->legacy_sectors_per_track > 0;
+}
+
+static int
+edd_has_default_cylinders(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_cylinders > 0;
+}
+
+static int
+edd_has_default_heads(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.num_default_heads > 0;
+}
+
+static int
+edd_has_default_sectors_per_track(struct edd_device *edev)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+	return info->params.sectors_per_track > 0;
+}
+
+static int
+edd_has_edd30(struct edd_device *edev)
+{
+	struct edd_info *info;
+	int i;
+	u8 csum = 0;
+
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+	if (!info)
+		return 0;
+
+	if (!(info->params.key == 0xBEDD || info->params.key == 0xDDBE)) {
+		return 0;
+	}
+
+
+	/* We support only T13 spec */
+	if (info->params.device_path_info_length != 44)
+		return 0;
+
+	for (i = 30; i < info->params.device_path_info_length + 30; i++)
+		csum += *(((u8 *)&info->params) + i);
+
+	if (csum)
+		return 0;
+
+	return 1;
+}
+
+
+static EDD_DEVICE_ATTR(raw_data, 0444, edd_show_raw_data, edd_has_edd_info);
+static EDD_DEVICE_ATTR(version, 0444, edd_show_version, edd_has_edd_info);
+static EDD_DEVICE_ATTR(extensions, 0444, edd_show_extensions, edd_has_edd_info);
+static EDD_DEVICE_ATTR(info_flags, 0444, edd_show_info_flags, edd_has_edd_info);
+static EDD_DEVICE_ATTR(sectors, 0444, edd_show_sectors, edd_has_edd_info);
+static EDD_DEVICE_ATTR(legacy_max_cylinder, 0444,
+                       edd_show_legacy_max_cylinder,
+		       edd_has_legacy_max_cylinder);
+static EDD_DEVICE_ATTR(legacy_max_head, 0444, edd_show_legacy_max_head,
+		       edd_has_legacy_max_head);
+static EDD_DEVICE_ATTR(legacy_sectors_per_track, 0444,
+                       edd_show_legacy_sectors_per_track,
+		       edd_has_legacy_sectors_per_track);
+static EDD_DEVICE_ATTR(default_cylinders, 0444, edd_show_default_cylinders,
+		       edd_has_default_cylinders);
+static EDD_DEVICE_ATTR(default_heads, 0444, edd_show_default_heads,
+		       edd_has_default_heads);
+static EDD_DEVICE_ATTR(default_sectors_per_track, 0444,
+		       edd_show_default_sectors_per_track,
+		       edd_has_default_sectors_per_track);
+static EDD_DEVICE_ATTR(interface, 0444, edd_show_interface, edd_has_edd30);
+static EDD_DEVICE_ATTR(host_bus, 0444, edd_show_host_bus, edd_has_edd30);
+static EDD_DEVICE_ATTR(mbr_signature, 0444, edd_show_mbr_signature, edd_has_mbr_signature);
+
+
+/* These are default attributes that are added for every edd
+ * device discovered.  There are none.
+ */
+static struct attribute * def_attrs[] = {
+	NULL,
+};
+
+/* These attributes are conditional and only added for some devices. */
+static struct edd_attribute * edd_attrs[] = {
+	&edd_attr_raw_data,
+	&edd_attr_version,
+	&edd_attr_extensions,
+	&edd_attr_info_flags,
+	&edd_attr_sectors,
+	&edd_attr_legacy_max_cylinder,
+	&edd_attr_legacy_max_head,
+	&edd_attr_legacy_sectors_per_track,
+	&edd_attr_default_cylinders,
+	&edd_attr_default_heads,
+	&edd_attr_default_sectors_per_track,
+	&edd_attr_interface,
+	&edd_attr_host_bus,
+	&edd_attr_mbr_signature,
+	NULL,
+};
+
+/**
+ *	edd_release - free edd structure
+ *	@kobj:	kobject of edd structure
+ *
+ *	This is called when the refcount of the edd structure
+ *	reaches 0. This should happen right after we unregister,
+ *	but just in case, we use the release callback anyway.
+ */
+
+static void edd_release(struct kobject * kobj)
+{
+	struct edd_device * dev = to_edd_device(kobj);
+	kfree(dev);
+}
+
+static struct kobj_type edd_ktype = {
+	.release	= edd_release,
+	.sysfs_ops	= &edd_attr_ops,
+	.default_attrs	= def_attrs,
+};
+
+static struct kset *edd_kset;
+
+
+/**
+ * edd_dev_is_type() - is this EDD device a 'type' device?
+ * @edev: target edd_device
+ * @type: a host bus or interface identifier string per the EDD spec
+ *
+ * Returns 1 (TRUE) if it is a 'type' device, 0 otherwise.
+ */
+static int
+edd_dev_is_type(struct edd_device *edev, const char *type)
+{
+	struct edd_info *info;
+	if (!edev)
+		return 0;
+	info = edd_dev_get_info(edev);
+
+	if (type && info) {
+		if (!strncmp(info->params.host_bus_type, type, strlen(type)) ||
+		    !strncmp(info->params.interface_type, type, strlen(type)))
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * edd_get_pci_dev() - finds pci_dev that matches edev
+ * @edev: edd_device
+ *
+ * Returns pci_dev if found, or NULL
+ */
+static struct pci_dev *
+edd_get_pci_dev(struct edd_device *edev)
+{
+	struct edd_info *info = edd_dev_get_info(edev);
+
+	if (edd_dev_is_type(edev, "PCI") || edd_dev_is_type(edev, "XPRS")) {
+		return pci_get_domain_bus_and_slot(0,
+				info->params.interface_path.pci.bus,
+				PCI_DEVFN(info->params.interface_path.pci.slot,
+				info->params.interface_path.pci.function));
+	}
+	return NULL;
+}
+
+static int
+edd_create_symlink_to_pcidev(struct edd_device *edev)
+{
+
+	struct pci_dev *pci_dev = edd_get_pci_dev(edev);
+	int ret;
+	if (!pci_dev)
+		return 1;
+	ret = sysfs_create_link(&edev->kobj,&pci_dev->dev.kobj,"pci_dev");
+	pci_dev_put(pci_dev);
+	return ret;
+}
+
+static inline void
+edd_device_unregister(struct edd_device *edev)
+{
+	kobject_put(&edev->kobj);
+}
+
+static void edd_populate_dir(struct edd_device * edev)
+{
+	struct edd_attribute * attr;
+	int error = 0;
+	int i;
+
+	for (i = 0; (attr = edd_attrs[i]) && !error; i++) {
+		if (!attr->test ||
+		    (attr->test && attr->test(edev)))
+			error = sysfs_create_file(&edev->kobj,&attr->attr);
+	}
+
+	if (!error) {
+		edd_create_symlink_to_pcidev(edev);
+	}
+}
+
+static int
+edd_device_register(struct edd_device *edev, int i)
+{
+	int error;
+
+	if (!edev)
+		return 1;
+	edd_dev_set_info(edev, i);
+	edev->kobj.kset = edd_kset;
+	error = kobject_init_and_add(&edev->kobj, &edd_ktype, NULL,
+				     "int13_dev%02x", 0x80 + i);
+	if (!error) {
+		edd_populate_dir(edev);
+		kobject_uevent(&edev->kobj, KOBJ_ADD);
+	}
+	return error;
+}
+
+static inline int edd_num_devices(void)
+{
+	return max_t(unsigned char,
+		     min_t(unsigned char, EDD_MBR_SIG_MAX, edd.mbr_signature_nr),
+		     min_t(unsigned char, EDDMAXNR, edd.edd_info_nr));
+}
+
+/**
+ * edd_init() - creates sysfs tree of EDD data
+ */
+static int __init
+edd_init(void)
+{
+	int i;
+	int rc=0;
+	struct edd_device *edev;
+
+	if (!edd_num_devices())
+		return -ENODEV;
+
+	printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n",
+	       EDD_VERSION, EDD_DATE, edd_num_devices());
+
+	edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
+	if (!edd_kset)
+		return -ENOMEM;
+
+	for (i = 0; i < edd_num_devices(); i++) {
+		edev = kzalloc(sizeof (*edev), GFP_KERNEL);
+		if (!edev) {
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		rc = edd_device_register(edev, i);
+		if (rc) {
+			kfree(edev);
+			goto out;
+		}
+		edd_devices[i] = edev;
+	}
+
+	return 0;
+
+out:
+	while (--i >= 0)
+		edd_device_unregister(edd_devices[i]);
+	kset_unregister(edd_kset);
+	return rc;
+}
+
+static void __exit
+edd_exit(void)
+{
+	int i;
+	struct edd_device *edev;
+
+	for (i = 0; i < edd_num_devices(); i++) {
+		if ((edev = edd_devices[i]))
+			edd_device_unregister(edev);
+	}
+	kset_unregister(edd_kset);
+}
+
+late_initcall(edd_init);
+module_exit(edd_exit);
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
new file mode 100644
index 000000000..d9895491f
--- /dev/null
+++ b/drivers/firmware/efi/Kconfig
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "EFI (Extensible Firmware Interface) Support"
+	depends on EFI
+
+config EFI_VARS
+	tristate "EFI Variable Support via sysfs"
+	depends on EFI && (X86 || IA64)
+	default n
+	help
+	  If you say Y here, you are able to get EFI (Extensible Firmware
+	  Interface) variable information via sysfs.  You may read,
+	  write, create, and destroy EFI variables through this interface.
+	  Note that this driver is only retained for compatibility with
+	  legacy users: new users should use the efivarfs filesystem
+	  instead.
+
+config EFI_ESRT
+	bool
+	depends on EFI && !IA64
+	default y
+
+config EFI_VARS_PSTORE
+	tristate "Register efivars backend for pstore"
+	depends on PSTORE
+	default y
+	help
+	  Say Y here to enable use efivars as a backend to pstore. This
+	  will allow writing console messages, crash dumps, or anything
+	  else supported by pstore to EFI variables.
+
+config EFI_VARS_PSTORE_DEFAULT_DISABLE
+	bool "Disable using efivars as a pstore backend by default"
+	depends on EFI_VARS_PSTORE
+	default n
+	help
+	  Saying Y here will disable the use of efivars as a storage
+	  backend for pstore by default. This setting can be overridden
+	  using the efivars module's pstore_disable parameter.
+
+config EFI_RUNTIME_MAP
+	bool "Export efi runtime maps to sysfs"
+	depends on X86 && EFI && KEXEC_CORE
+	default y
+	help
+	  Export efi runtime memory maps to /sys/firmware/efi/runtime-map.
+	  That memory map is used for example by kexec to set up efi virtual
+	  mapping the 2nd kernel, but can also be used for debugging purposes.
+
+	  See also Documentation/ABI/testing/sysfs-firmware-efi-runtime-map.
+
+config EFI_FAKE_MEMMAP
+	bool "Enable EFI fake memory map"
+	depends on EFI && X86
+	default n
+	help
+	  Saying Y here will enable "efi_fake_mem" boot option.
+	  By specifying this parameter, you can add arbitrary attribute
+	  to specific memory range by updating original (firmware provided)
+	  EFI memmap.
+	  This is useful for debugging of EFI memmap related feature.
+	  e.g. Address Range Mirroring feature.
+
+config EFI_MAX_FAKE_MEM
+	int "maximum allowable number of ranges in efi_fake_mem boot option"
+	depends on EFI_FAKE_MEMMAP
+	range 1 128
+	default 8
+	help
+	  Maximum allowable number of ranges in efi_fake_mem boot option.
+	  Ranges can be set up to this value using comma-separated list.
+	  The default value is 8.
+
+config EFI_SOFT_RESERVE
+	bool "Reserve EFI Specific Purpose Memory"
+	depends on EFI && EFI_STUB && ACPI_HMAT
+	default ACPI_HMAT
+	help
+	  On systems that have mixed performance classes of memory EFI
+	  may indicate specific purpose memory with an attribute (See
+	  EFI_MEMORY_SP in UEFI 2.8). A memory range tagged with this
+	  attribute may have unique performance characteristics compared
+	  to the system's general purpose "System RAM" pool. On the
+	  expectation that such memory has application specific usage,
+	  and its base EFI memory type is "conventional" answer Y to
+	  arrange for the kernel to reserve it as a "Soft Reserved"
+	  resource, and set aside for direct-access (device-dax) by
+	  default. The memory range can later be optionally assigned to
+	  the page allocator by system administrator policy via the
+	  device-dax kmem facility. Say N to have the kernel treat this
+	  memory as "System RAM" by default.
+
+	  If unsure, say Y.
+
+config EFI_PARAMS_FROM_FDT
+	bool
+	help
+	  Select this config option from the architecture Kconfig if
+	  the EFI runtime support gets system table address, memory
+          map address, and other parameters from the device tree.
+
+config EFI_RUNTIME_WRAPPERS
+	bool
+
+config EFI_GENERIC_STUB
+	bool
+
+config EFI_ARMSTUB_DTB_LOADER
+	bool "Enable the DTB loader"
+	depends on EFI_GENERIC_STUB && !RISCV
+	default y
+	help
+	  Select this config option to add support for the dtb= command
+	  line parameter, allowing a device tree blob to be loaded into
+	  memory from the EFI System Partition by the stub.
+
+	  If the device tree is provided by the platform or by
+	  the bootloader this option may not be needed.
+	  But, for various development reasons and to maintain existing
+	  functionality for bootloaders that do not have such support
+	  this option is necessary.
+
+config EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER
+	bool "Enable the command line initrd loader" if !X86
+	depends on EFI_STUB && (EFI_GENERIC_STUB || X86)
+	default y
+	depends on !RISCV
+	help
+	  Select this config option to add support for the initrd= command
+	  line parameter, allowing an initrd that resides on the same volume
+	  as the kernel image to be loaded into memory.
+
+	  This method is deprecated.
+
+config EFI_BOOTLOADER_CONTROL
+	tristate "EFI Bootloader Control"
+	default n
+	help
+	  This module installs a reboot hook, such that if reboot() is
+	  invoked with a string argument NNN, "NNN" is copied to the
+	  "LoaderEntryOneShot" EFI variable, to be read by the
+	  bootloader. If the string matches one of the boot labels
+	  defined in its configuration, the bootloader will boot once
+	  to that label. The "LoaderEntryRebootReason" EFI variable is
+	  set with the reboot reason: "reboot" or "shutdown". The
+	  bootloader reads this reboot reason and takes particular
+	  action according to its policy.
+
+config EFI_CAPSULE_LOADER
+	tristate "EFI capsule loader"
+	depends on EFI
+	help
+	  This option exposes a loader interface "/dev/efi_capsule_loader" for
+	  users to load EFI capsules. This driver requires working runtime
+	  capsule support in the firmware, which many OEMs do not provide.
+
+	  Most users should say N.
+
+config EFI_CAPSULE_QUIRK_QUARK_CSH
+	bool "Add support for Quark capsules with non-standard headers"
+	depends on X86 && !64BIT
+	select EFI_CAPSULE_LOADER
+	default y
+	help
+	  Add support for processing Quark X1000 EFI capsules, whose header
+	  layout deviates from the layout mandated by the UEFI specification.
+
+config EFI_TEST
+	tristate "EFI Runtime Service Tests Support"
+	depends on EFI
+	default n
+	help
+	  This driver uses the efi.<service> function pointers directly instead
+	  of going through the efivar API, because it is not trying to test the
+	  kernel subsystem, just for testing the UEFI runtime service
+	  interfaces which are provided by the firmware. This driver is used
+	  by the Firmware Test Suite (FWTS) for testing the UEFI runtime
+	  interfaces readiness of the firmware.
+	  Details for FWTS are available from:
+	  <https://wiki.ubuntu.com/FirmwareTestSuite>
+
+	  Say Y here to enable the runtime services support via /dev/efi_test.
+	  If unsure, say N.
+
+config APPLE_PROPERTIES
+	bool "Apple Device Properties"
+	depends on EFI_STUB && X86
+	select EFI_DEV_PATH_PARSER
+	select UCS2_STRING
+	help
+	  Retrieve properties from EFI on Apple Macs and assign them to
+	  devices, allowing for improved support of Apple hardware.
+	  Properties that would otherwise be missing include the
+	  Thunderbolt Device ROM and GPU configuration data.
+
+	  If unsure, say Y if you have a Mac.  Otherwise N.
+
+config RESET_ATTACK_MITIGATION
+	bool "Reset memory attack mitigation"
+	depends on EFI_STUB
+	help
+	  Request that the firmware clear the contents of RAM after a reboot
+	  using the TCG Platform Reset Attack Mitigation specification. This
+	  protects against an attacker forcibly rebooting the system while it
+	  still contains secrets in RAM, booting another OS and extracting the
+	  secrets. This should only be enabled when userland is configured to
+	  clear the MemoryOverwriteRequest flag on clean shutdown after secrets
+	  have been evicted, since otherwise it will trigger even on clean
+	  reboots.
+
+config EFI_RCI2_TABLE
+	bool "EFI Runtime Configuration Interface Table Version 2 Support"
+	depends on X86 || COMPILE_TEST
+	help
+	  Displays the content of the Runtime Configuration Interface
+	  Table version 2 on Dell EMC PowerEdge systems as a binary
+	  attribute 'rci2' under /sys/firmware/efi/tables directory.
+
+	  RCI2 table contains BIOS HII in XML format and is used to populate
+	  BIOS setup page in Dell EMC OpenManage Server Administrator tool.
+	  The BIOS setup page contains BIOS tokens which can be configured.
+
+	  Say Y here for Dell EMC PowerEdge systems.
+
+config EFI_DISABLE_PCI_DMA
+       bool "Clear Busmaster bit on PCI bridges during ExitBootServices()"
+       help
+	  Disable the busmaster bit in the control register on all PCI bridges
+	  while calling ExitBootServices() and passing control to the runtime
+	  kernel. System firmware may configure the IOMMU to prevent malicious
+	  PCI devices from being able to attack the OS via DMA. However, since
+	  firmware can't guarantee that the OS is IOMMU-aware, it will tear
+	  down IOMMU configuration when ExitBootServices() is called. This
+	  leaves a window between where a hostile device could still cause
+	  damage before Linux configures the IOMMU again.
+
+	  If you say Y here, the EFI stub will clear the busmaster bit on all
+	  PCI bridges before ExitBootServices() is called. This will prevent
+	  any malicious PCI devices from being able to perform DMA until the
+	  kernel reenables busmastering after configuring the IOMMU.
+
+	  This option will cause failures with some poorly behaved hardware
+	  and should not be enabled without testing. The kernel commandline
+	  options "efi=disable_early_pci_dma" or "efi=no_disable_early_pci_dma"
+	  may be used to override this option.
+
+endmenu
+
+config EFI_EMBEDDED_FIRMWARE
+	bool
+	depends on EFI
+	select CRYPTO_LIB_SHA256
+
+config UEFI_CPER
+	bool
+
+config UEFI_CPER_ARM
+	bool
+	depends on UEFI_CPER && ( ARM || ARM64 )
+	default y
+
+config UEFI_CPER_X86
+	bool
+	depends on UEFI_CPER && X86
+	default y
+
+config EFI_DEV_PATH_PARSER
+	bool
+	depends on ACPI
+	default n
+
+config EFI_EARLYCON
+	def_bool y
+	depends on EFI && SERIAL_EARLYCON && !ARM && !IA64
+	select FONT_SUPPORT
+	select ARCH_USE_MEMREMAP_PROT
+
+config EFI_CUSTOM_SSDT_OVERLAYS
+	bool "Load custom ACPI SSDT overlay from an EFI variable"
+	depends on EFI && ACPI
+	default ACPI_TABLE_UPGRADE
+	help
+	  Allow loading of an ACPI SSDT overlay from an EFI variable specified
+	  by a kernel command line option.
+
+	  See Documentation/admin-guide/acpi/ssdt-overlays.rst for more
+	  information.
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
new file mode 100644
index 000000000..d6ca2da19
--- /dev/null
+++ b/drivers/firmware/efi/Makefile
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for linux kernel
+#
+
+#
+# ARM64 maps efi runtime services in userspace addresses
+# which don't have KASAN shadow. So dereference of these addresses
+# in efi_call_virt() will cause crash if this code instrumented.
+#
+KASAN_SANITIZE_runtime-wrappers.o	:= n
+
+obj-$(CONFIG_ACPI_BGRT) 		+= efi-bgrt.o
+obj-$(CONFIG_EFI)			+= efi.o vars.o reboot.o memattr.o tpm.o
+obj-$(CONFIG_EFI)			+= capsule.o memmap.o
+obj-$(CONFIG_EFI_PARAMS_FROM_FDT)	+= fdtparams.o
+obj-$(CONFIG_EFI_VARS)			+= efivars.o
+obj-$(CONFIG_EFI_ESRT)			+= esrt.o
+obj-$(CONFIG_EFI_VARS_PSTORE)		+= efi-pstore.o
+obj-$(CONFIG_UEFI_CPER)			+= cper.o
+obj-$(CONFIG_EFI_RUNTIME_MAP)		+= runtime-map.o
+obj-$(CONFIG_EFI_RUNTIME_WRAPPERS)	+= runtime-wrappers.o
+subdir-$(CONFIG_EFI_STUB)		+= libstub
+obj-$(CONFIG_EFI_FAKE_MEMMAP)		+= fake_map.o
+obj-$(CONFIG_EFI_BOOTLOADER_CONTROL)	+= efibc.o
+obj-$(CONFIG_EFI_TEST)			+= test/
+obj-$(CONFIG_EFI_DEV_PATH_PARSER)	+= dev-path-parser.o
+obj-$(CONFIG_APPLE_PROPERTIES)		+= apple-properties.o
+obj-$(CONFIG_EFI_RCI2_TABLE)		+= rci2-table.o
+obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE)	+= embedded-firmware.o
+obj-$(CONFIG_LOAD_UEFI_KEYS)		+= mokvar-table.o
+
+fake_map-y				+= fake_mem.o
+fake_map-$(CONFIG_X86)			+= x86_fake_mem.o
+
+arm-obj-$(CONFIG_EFI)			:= efi-init.o arm-runtime.o
+obj-$(CONFIG_ARM)			+= $(arm-obj-y)
+obj-$(CONFIG_ARM64)			+= $(arm-obj-y)
+riscv-obj-$(CONFIG_EFI)			:= efi-init.o riscv-runtime.o
+obj-$(CONFIG_RISCV)			+= $(riscv-obj-y)
+obj-$(CONFIG_EFI_CAPSULE_LOADER)	+= capsule-loader.o
+obj-$(CONFIG_EFI_EARLYCON)		+= earlycon.o
+obj-$(CONFIG_UEFI_CPER_ARM)		+= cper-arm.o
+obj-$(CONFIG_UEFI_CPER_X86)		+= cper-x86.o
diff --git a/drivers/firmware/efi/apple-properties.c b/drivers/firmware/efi/apple-properties.c
new file mode 100644
index 000000000..e51838d74
--- /dev/null
+++ b/drivers/firmware/efi/apple-properties.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * apple-properties.c - EFI device properties on Macs
+ * Copyright (C) 2016 Lukas Wunner <lukas@wunner.de>
+ *
+ * Properties are stored either as:
+ * u8 arrays which can be retrieved with device_property_read_u8_array() or
+ * booleans which can be queried with device_property_present().
+ */
+
+#define pr_fmt(fmt) "apple-properties: " fmt
+
+#include <linux/memblock.h>
+#include <linux/efi.h>
+#include <linux/io.h>
+#include <linux/platform_data/x86/apple.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/ucs2_string.h>
+#include <asm/setup.h>
+
+static bool dump_properties __initdata;
+
+static int __init dump_properties_enable(char *arg)
+{
+	dump_properties = true;
+	return 1;
+}
+
+__setup("dump_apple_properties", dump_properties_enable);
+
+struct dev_header {
+	u32 len;
+	u32 prop_count;
+	struct efi_dev_path path[];
+	/*
+	 * followed by key/value pairs, each key and value preceded by u32 len,
+	 * len includes itself, value may be empty (in which case its len is 4)
+	 */
+};
+
+struct properties_header {
+	u32 len;
+	u32 version;
+	u32 dev_count;
+	struct dev_header dev_header[];
+};
+
+static void __init unmarshal_key_value_pairs(struct dev_header *dev_header,
+					     struct device *dev, const void *ptr,
+					     struct property_entry entry[])
+{
+	int i;
+
+	for (i = 0; i < dev_header->prop_count; i++) {
+		int remaining = dev_header->len - (ptr - (void *)dev_header);
+		u32 key_len, val_len, entry_len;
+		const u8 *entry_data;
+		char *key;
+
+		if (sizeof(key_len) > remaining)
+			break;
+
+		key_len = *(typeof(key_len) *)ptr;
+		if (key_len + sizeof(val_len) > remaining ||
+		    key_len < sizeof(key_len) + sizeof(efi_char16_t) ||
+		    *(efi_char16_t *)(ptr + sizeof(key_len)) == 0) {
+			dev_err(dev, "invalid property name len at %#zx\n",
+				ptr - (void *)dev_header);
+			break;
+		}
+
+		val_len = *(typeof(val_len) *)(ptr + key_len);
+		if (key_len + val_len > remaining ||
+		    val_len < sizeof(val_len)) {
+			dev_err(dev, "invalid property val len at %#zx\n",
+				ptr - (void *)dev_header + key_len);
+			break;
+		}
+
+		/* 4 bytes to accommodate UTF-8 code points + null byte */
+		key = kzalloc((key_len - sizeof(key_len)) * 4 + 1, GFP_KERNEL);
+		if (!key) {
+			dev_err(dev, "cannot allocate property name\n");
+			break;
+		}
+		ucs2_as_utf8(key, ptr + sizeof(key_len),
+			     key_len - sizeof(key_len));
+
+		entry_data = ptr + key_len + sizeof(val_len);
+		entry_len = val_len - sizeof(val_len);
+		if (entry_len)
+			entry[i] = PROPERTY_ENTRY_U8_ARRAY_LEN(key, entry_data,
+							       entry_len);
+		else
+			entry[i] = PROPERTY_ENTRY_BOOL(key);
+
+		if (dump_properties) {
+			dev_info(dev, "property: %s\n", key);
+			print_hex_dump(KERN_INFO, pr_fmt(), DUMP_PREFIX_OFFSET,
+				16, 1, entry_data, entry_len, true);
+		}
+
+		ptr += key_len + val_len;
+	}
+
+	if (i != dev_header->prop_count) {
+		dev_err(dev, "got %d device properties, expected %u\n", i,
+			dev_header->prop_count);
+		print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET,
+			16, 1, dev_header, dev_header->len, true);
+		return;
+	}
+
+	dev_info(dev, "assigning %d device properties\n", i);
+}
+
+static int __init unmarshal_devices(struct properties_header *properties)
+{
+	size_t offset = offsetof(struct properties_header, dev_header[0]);
+
+	while (offset + sizeof(struct dev_header) < properties->len) {
+		struct dev_header *dev_header = (void *)properties + offset;
+		struct property_entry *entry = NULL;
+		const struct efi_dev_path *ptr;
+		struct device *dev;
+		size_t len;
+		int ret, i;
+
+		if (offset + dev_header->len > properties->len ||
+		    dev_header->len <= sizeof(*dev_header)) {
+			pr_err("invalid len in dev_header at %#zx\n", offset);
+			return -EINVAL;
+		}
+
+		ptr = dev_header->path;
+		len = dev_header->len - sizeof(*dev_header);
+
+		dev = efi_get_device_by_path(&ptr, &len);
+		if (IS_ERR(dev)) {
+			pr_err("device path parse error %ld at %#zx:\n",
+			       PTR_ERR(dev), (void *)ptr - (void *)dev_header);
+			print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET,
+			       16, 1, dev_header, dev_header->len, true);
+			dev = NULL;
+			goto skip_device;
+		}
+
+		entry = kcalloc(dev_header->prop_count + 1, sizeof(*entry),
+				GFP_KERNEL);
+		if (!entry) {
+			dev_err(dev, "cannot allocate properties\n");
+			goto skip_device;
+		}
+
+		unmarshal_key_value_pairs(dev_header, dev, ptr, entry);
+		if (!entry[0].name)
+			goto skip_device;
+
+		ret = device_add_properties(dev, entry); /* makes deep copy */
+		if (ret)
+			dev_err(dev, "error %d assigning properties\n", ret);
+
+		for (i = 0; entry[i].name; i++)
+			kfree(entry[i].name);
+
+skip_device:
+		kfree(entry);
+		put_device(dev);
+		offset += dev_header->len;
+	}
+
+	return 0;
+}
+
+static int __init map_properties(void)
+{
+	struct properties_header *properties;
+	struct setup_data *data;
+	u32 data_len;
+	u64 pa_data;
+	int ret;
+
+	if (!x86_apple_machine)
+		return 0;
+
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = memremap(pa_data, sizeof(*data), MEMREMAP_WB);
+		if (!data) {
+			pr_err("cannot map setup_data header\n");
+			return -ENOMEM;
+		}
+
+		if (data->type != SETUP_APPLE_PROPERTIES) {
+			pa_data = data->next;
+			memunmap(data);
+			continue;
+		}
+
+		data_len = data->len;
+		memunmap(data);
+
+		data = memremap(pa_data, sizeof(*data) + data_len, MEMREMAP_WB);
+		if (!data) {
+			pr_err("cannot map setup_data payload\n");
+			return -ENOMEM;
+		}
+
+		properties = (struct properties_header *)data->data;
+		if (properties->version != 1) {
+			pr_err("unsupported version:\n");
+			print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET,
+			       16, 1, properties, data_len, true);
+			ret = -ENOTSUPP;
+		} else if (properties->len != data_len) {
+			pr_err("length mismatch, expected %u\n", data_len);
+			print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET,
+			       16, 1, properties, data_len, true);
+			ret = -EINVAL;
+		} else
+			ret = unmarshal_devices(properties);
+
+		/*
+		 * Can only free the setup_data payload but not its header
+		 * to avoid breaking the chain of ->next pointers.
+		 */
+		data->len = 0;
+		memunmap(data);
+		memblock_free_late(pa_data + sizeof(*data), data_len);
+
+		return ret;
+	}
+	return 0;
+}
+
+fs_initcall(map_properties);
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
new file mode 100644
index 000000000..3359ae2ad
--- /dev/null
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Extensible Firmware Interface
+ *
+ * Based on Extensible Firmware Interface Specification version 2.4
+ *
+ * Copyright (C) 2013, 2014 Linaro Ltd.
+ */
+
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/mm_types.h>
+#include <linux/preempt.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/pgtable.h>
+
+#include <asm/cacheflush.h>
+#include <asm/efi.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+
+#if defined(CONFIG_PTDUMP_DEBUGFS) && defined(CONFIG_ARM64)
+#include <asm/ptdump.h>
+
+static struct ptdump_info efi_ptdump_info = {
+	.mm		= &efi_mm,
+	.markers	= (struct addr_marker[]){
+		{ 0,				"UEFI runtime start" },
+		{ DEFAULT_MAP_WINDOW_64,	"UEFI runtime end" },
+		{ -1,				NULL }
+	},
+	.base_addr	= 0,
+};
+
+static int __init ptdump_init(void)
+{
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		ptdump_debugfs_register(&efi_ptdump_info, "efi_page_tables");
+
+	return 0;
+}
+device_initcall(ptdump_init);
+
+#endif
+
+static bool __init efi_virtmap_init(void)
+{
+	efi_memory_desc_t *md;
+
+	efi_mm.pgd = pgd_alloc(&efi_mm);
+	mm_init_cpumask(&efi_mm);
+	init_new_context(NULL, &efi_mm);
+
+	for_each_efi_memory_desc(md) {
+		phys_addr_t phys = md->phys_addr;
+		int ret;
+
+		if (!(md->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+		if (md->virt_addr == 0)
+			return false;
+
+		ret = efi_create_mapping(&efi_mm, md);
+		if (ret) {
+			pr_warn("  EFI remap %pa: failed to create mapping (%d)\n",
+				&phys, ret);
+			return false;
+		}
+	}
+
+	if (efi_memattr_apply_permissions(&efi_mm, efi_set_mapping_permissions))
+		return false;
+
+	return true;
+}
+
+/*
+ * Enable the UEFI Runtime Services if all prerequisites are in place, i.e.,
+ * non-early mapping of the UEFI system table and virtual mappings for all
+ * EFI_MEMORY_RUNTIME regions.
+ */
+static int __init arm_enable_runtime_services(void)
+{
+	u64 mapsize;
+
+	if (!efi_enabled(EFI_BOOT)) {
+		pr_info("EFI services will not be available.\n");
+		return 0;
+	}
+
+	efi_memmap_unmap();
+
+	mapsize = efi.memmap.desc_size * efi.memmap.nr_map;
+
+	if (efi_memmap_init_late(efi.memmap.phys_map, mapsize)) {
+		pr_err("Failed to remap EFI memory map\n");
+		return 0;
+	}
+
+	if (efi_soft_reserve_enabled()) {
+		efi_memory_desc_t *md;
+
+		for_each_efi_memory_desc(md) {
+			int md_size = md->num_pages << EFI_PAGE_SHIFT;
+			struct resource *res;
+
+			if (!(md->attribute & EFI_MEMORY_SP))
+				continue;
+
+			res = kzalloc(sizeof(*res), GFP_KERNEL);
+			if (WARN_ON(!res))
+				break;
+
+			res->start	= md->phys_addr;
+			res->end	= md->phys_addr + md_size - 1;
+			res->name	= "Soft Reserved";
+			res->flags	= IORESOURCE_MEM;
+			res->desc	= IORES_DESC_SOFT_RESERVED;
+
+			insert_resource(&iomem_resource, res);
+		}
+	}
+
+	if (efi_runtime_disabled()) {
+		pr_info("EFI runtime services will be disabled.\n");
+		return 0;
+	}
+
+	if (efi_enabled(EFI_RUNTIME_SERVICES)) {
+		pr_info("EFI runtime services access via paravirt.\n");
+		return 0;
+	}
+
+	pr_info("Remapping and enabling EFI services.\n");
+
+	if (!efi_virtmap_init()) {
+		pr_err("UEFI virtual mapping missing or invalid -- runtime services will not be available\n");
+		return -ENOMEM;
+	}
+
+	/* Set up runtime services function pointers */
+	efi_native_runtime_setup();
+	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+
+	return 0;
+}
+early_initcall(arm_enable_runtime_services);
+
+void efi_virtmap_load(void)
+{
+	preempt_disable();
+	efi_set_pgd(&efi_mm);
+}
+
+void efi_virtmap_unload(void)
+{
+	efi_set_pgd(current->active_mm);
+	preempt_enable();
+}
+
+
+static int __init arm_dmi_init(void)
+{
+	/*
+	 * On arm64/ARM, DMI depends on UEFI, and dmi_setup() needs to
+	 * be called early because dmi_id_init(), which is an arch_initcall
+	 * itself, depends on dmi_scan_machine() having been called already.
+	 */
+	dmi_setup();
+	return 0;
+}
+core_initcall(arm_dmi_init);
diff --git a/drivers/firmware/efi/capsule-loader.c b/drivers/firmware/efi/capsule-loader.c
new file mode 100644
index 000000000..3e8d4b51a
--- /dev/null
+++ b/drivers/firmware/efi/capsule-loader.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EFI capsule loader driver.
+ *
+ * Copyright 2015 Intel Corporation
+ */
+
+#define pr_fmt(fmt) "efi: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/efi.h>
+#include <linux/vmalloc.h>
+
+#define NO_FURTHER_WRITE_ACTION -1
+
+/**
+ * efi_free_all_buff_pages - free all previous allocated buffer pages
+ * @cap_info: pointer to current instance of capsule_info structure
+ *
+ *	In addition to freeing buffer pages, it flags NO_FURTHER_WRITE_ACTION
+ *	to cease processing data in subsequent write(2) calls until close(2)
+ *	is called.
+ **/
+static void efi_free_all_buff_pages(struct capsule_info *cap_info)
+{
+	while (cap_info->index > 0)
+		__free_page(cap_info->pages[--cap_info->index]);
+
+	cap_info->index = NO_FURTHER_WRITE_ACTION;
+}
+
+int __efi_capsule_setup_info(struct capsule_info *cap_info)
+{
+	size_t pages_needed;
+	int ret;
+	void *temp_page;
+
+	pages_needed = ALIGN(cap_info->total_size, PAGE_SIZE) / PAGE_SIZE;
+
+	if (pages_needed == 0) {
+		pr_err("invalid capsule size\n");
+		return -EINVAL;
+	}
+
+	/* Check if the capsule binary supported */
+	ret = efi_capsule_supported(cap_info->header.guid,
+				    cap_info->header.flags,
+				    cap_info->header.imagesize,
+				    &cap_info->reset_type);
+	if (ret) {
+		pr_err("capsule not supported\n");
+		return ret;
+	}
+
+	temp_page = krealloc(cap_info->pages,
+			     pages_needed * sizeof(void *),
+			     GFP_KERNEL | __GFP_ZERO);
+	if (!temp_page)
+		return -ENOMEM;
+
+	cap_info->pages = temp_page;
+
+	temp_page = krealloc(cap_info->phys,
+			     pages_needed * sizeof(phys_addr_t *),
+			     GFP_KERNEL | __GFP_ZERO);
+	if (!temp_page)
+		return -ENOMEM;
+
+	cap_info->phys = temp_page;
+
+	return 0;
+}
+
+/**
+ * efi_capsule_setup_info - obtain the efi capsule header in the binary and
+ *			    setup capsule_info structure
+ * @cap_info: pointer to current instance of capsule_info structure
+ * @kbuff: a mapped first page buffer pointer
+ * @hdr_bytes: the total received number of bytes for efi header
+ *
+ * Platforms with non-standard capsule update mechanisms can override
+ * this __weak function so they can perform any required capsule
+ * image munging. See quark_quirk_function() for an example.
+ **/
+int __weak efi_capsule_setup_info(struct capsule_info *cap_info, void *kbuff,
+				  size_t hdr_bytes)
+{
+	/* Only process data block that is larger than efi header size */
+	if (hdr_bytes < sizeof(efi_capsule_header_t))
+		return 0;
+
+	memcpy(&cap_info->header, kbuff, sizeof(cap_info->header));
+	cap_info->total_size = cap_info->header.imagesize;
+
+	return __efi_capsule_setup_info(cap_info);
+}
+
+/**
+ * efi_capsule_submit_update - invoke the efi_capsule_update API once binary
+ *			       upload done
+ * @cap_info: pointer to current instance of capsule_info structure
+ **/
+static ssize_t efi_capsule_submit_update(struct capsule_info *cap_info)
+{
+	bool do_vunmap = false;
+	int ret;
+
+	/*
+	 * cap_info->capsule may have been assigned already by a quirk
+	 * handler, so only overwrite it if it is NULL
+	 */
+	if (!cap_info->capsule) {
+		cap_info->capsule = vmap(cap_info->pages, cap_info->index,
+					 VM_MAP, PAGE_KERNEL);
+		if (!cap_info->capsule)
+			return -ENOMEM;
+		do_vunmap = true;
+	}
+
+	ret = efi_capsule_update(cap_info->capsule, cap_info->phys);
+	if (do_vunmap)
+		vunmap(cap_info->capsule);
+	if (ret) {
+		pr_err("capsule update failed\n");
+		return ret;
+	}
+
+	/* Indicate capsule binary uploading is done */
+	cap_info->index = NO_FURTHER_WRITE_ACTION;
+
+	if (cap_info->header.flags & EFI_CAPSULE_PERSIST_ACROSS_RESET) {
+		pr_info("Successfully uploaded capsule file with reboot type '%s'\n",
+			!cap_info->reset_type ? "RESET_COLD" :
+			cap_info->reset_type == 1 ? "RESET_WARM" :
+			"RESET_SHUTDOWN");
+	} else {
+		pr_info("Successfully processed capsule file\n");
+	}
+
+	return 0;
+}
+
+/**
+ * efi_capsule_write - store the capsule binary and pass it to
+ *		       efi_capsule_update() API
+ * @file: file pointer
+ * @buff: buffer pointer
+ * @count: number of bytes in @buff
+ * @offp: not used
+ *
+ *	Expectation:
+ *	- A user space tool should start at the beginning of capsule binary and
+ *	  pass data in sequentially.
+ *	- Users should close and re-open this file note in order to upload more
+ *	  capsules.
+ *	- After an error returned, user should close the file and restart the
+ *	  operation for the next try otherwise -EIO will be returned until the
+ *	  file is closed.
+ *	- An EFI capsule header must be located at the beginning of capsule
+ *	  binary file and passed in as first block data of write operation.
+ **/
+static ssize_t efi_capsule_write(struct file *file, const char __user *buff,
+				 size_t count, loff_t *offp)
+{
+	int ret;
+	struct capsule_info *cap_info = file->private_data;
+	struct page *page;
+	void *kbuff = NULL;
+	size_t write_byte;
+
+	if (count == 0)
+		return 0;
+
+	/* Return error while NO_FURTHER_WRITE_ACTION is flagged */
+	if (cap_info->index < 0)
+		return -EIO;
+
+	/* Only alloc a new page when previous page is full */
+	if (!cap_info->page_bytes_remain) {
+		page = alloc_page(GFP_KERNEL);
+		if (!page) {
+			ret = -ENOMEM;
+			goto failed;
+		}
+
+		cap_info->pages[cap_info->index] = page;
+		cap_info->phys[cap_info->index] = page_to_phys(page);
+		cap_info->page_bytes_remain = PAGE_SIZE;
+		cap_info->index++;
+	} else {
+		page = cap_info->pages[cap_info->index - 1];
+	}
+
+	kbuff = kmap(page);
+	kbuff += PAGE_SIZE - cap_info->page_bytes_remain;
+
+	/* Copy capsule binary data from user space to kernel space buffer */
+	write_byte = min_t(size_t, count, cap_info->page_bytes_remain);
+	if (copy_from_user(kbuff, buff, write_byte)) {
+		ret = -EFAULT;
+		goto fail_unmap;
+	}
+	cap_info->page_bytes_remain -= write_byte;
+
+	/* Setup capsule binary info structure */
+	if (cap_info->header.headersize == 0) {
+		ret = efi_capsule_setup_info(cap_info, kbuff - cap_info->count,
+					     cap_info->count + write_byte);
+		if (ret)
+			goto fail_unmap;
+	}
+
+	cap_info->count += write_byte;
+	kunmap(page);
+
+	/* Submit the full binary to efi_capsule_update() API */
+	if (cap_info->header.headersize > 0 &&
+	    cap_info->count >= cap_info->total_size) {
+		if (cap_info->count > cap_info->total_size) {
+			pr_err("capsule upload size exceeded header defined size\n");
+			ret = -EINVAL;
+			goto failed;
+		}
+
+		ret = efi_capsule_submit_update(cap_info);
+		if (ret)
+			goto failed;
+	}
+
+	return write_byte;
+
+fail_unmap:
+	kunmap(page);
+failed:
+	efi_free_all_buff_pages(cap_info);
+	return ret;
+}
+
+/**
+ * efi_capsule_release - called by file close
+ * @inode: not used
+ * @file: file pointer
+ *
+ *	We will not free successfully submitted pages since efi update
+ *	requires data to be maintained across system reboot.
+ **/
+static int efi_capsule_release(struct inode *inode, struct file *file)
+{
+	struct capsule_info *cap_info = file->private_data;
+
+	if (cap_info->index > 0 &&
+	    (cap_info->header.headersize == 0 ||
+	     cap_info->count < cap_info->total_size)) {
+		pr_err("capsule upload not complete\n");
+		efi_free_all_buff_pages(cap_info);
+	}
+
+	kfree(cap_info->pages);
+	kfree(cap_info->phys);
+	kfree(file->private_data);
+	file->private_data = NULL;
+	return 0;
+}
+
+/**
+ * efi_capsule_open - called by file open
+ * @inode: not used
+ * @file: file pointer
+ *
+ *	Will allocate each capsule_info memory for each file open call.
+ *	This provided the capability to support multiple file open feature
+ *	where user is not needed to wait for others to finish in order to
+ *	upload their capsule binary.
+ **/
+static int efi_capsule_open(struct inode *inode, struct file *file)
+{
+	struct capsule_info *cap_info;
+
+	cap_info = kzalloc(sizeof(*cap_info), GFP_KERNEL);
+	if (!cap_info)
+		return -ENOMEM;
+
+	cap_info->pages = kzalloc(sizeof(void *), GFP_KERNEL);
+	if (!cap_info->pages) {
+		kfree(cap_info);
+		return -ENOMEM;
+	}
+
+	cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL);
+	if (!cap_info->phys) {
+		kfree(cap_info->pages);
+		kfree(cap_info);
+		return -ENOMEM;
+	}
+
+	file->private_data = cap_info;
+
+	return 0;
+}
+
+static const struct file_operations efi_capsule_fops = {
+	.owner = THIS_MODULE,
+	.open = efi_capsule_open,
+	.write = efi_capsule_write,
+	.release = efi_capsule_release,
+	.llseek = no_llseek,
+};
+
+static struct miscdevice efi_capsule_misc = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "efi_capsule_loader",
+	.fops = &efi_capsule_fops,
+};
+
+static int __init efi_capsule_loader_init(void)
+{
+	int ret;
+
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return -ENODEV;
+
+	ret = misc_register(&efi_capsule_misc);
+	if (ret)
+		pr_err("Unable to register capsule loader device\n");
+
+	return ret;
+}
+module_init(efi_capsule_loader_init);
+
+static void __exit efi_capsule_loader_exit(void)
+{
+	misc_deregister(&efi_capsule_misc);
+}
+module_exit(efi_capsule_loader_exit);
+
+MODULE_DESCRIPTION("EFI capsule firmware binary loader");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/efi/capsule.c b/drivers/firmware/efi/capsule.c
new file mode 100644
index 000000000..598b7800d
--- /dev/null
+++ b/drivers/firmware/efi/capsule.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * EFI capsule support.
+ *
+ * Copyright 2013 Intel Corporation; author Matt Fleming
+ */
+
+#define pr_fmt(fmt) "efi: " fmt
+
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/highmem.h>
+#include <linux/efi.h>
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+
+typedef struct {
+	u64 length;
+	u64 data;
+} efi_capsule_block_desc_t;
+
+static bool capsule_pending;
+static bool stop_capsules;
+static int efi_reset_type = -1;
+
+/*
+ * capsule_mutex serialises access to both capsule_pending and
+ * efi_reset_type and stop_capsules.
+ */
+static DEFINE_MUTEX(capsule_mutex);
+
+/**
+ * efi_capsule_pending - has a capsule been passed to the firmware?
+ * @reset_type: store the type of EFI reset if capsule is pending
+ *
+ * To ensure that the registered capsule is processed correctly by the
+ * firmware we need to perform a specific type of reset. If a capsule is
+ * pending return the reset type in @reset_type.
+ *
+ * This function will race with callers of efi_capsule_update(), for
+ * example, calling this function while somebody else is in
+ * efi_capsule_update() but hasn't reached efi_capsue_update_locked()
+ * will miss the updates to capsule_pending and efi_reset_type after
+ * efi_capsule_update_locked() completes.
+ *
+ * A non-racy use is from platform reboot code because we use
+ * system_state to ensure no capsules can be sent to the firmware once
+ * we're at SYSTEM_RESTART. See efi_capsule_update_locked().
+ */
+bool efi_capsule_pending(int *reset_type)
+{
+	if (!capsule_pending)
+		return false;
+
+	if (reset_type)
+		*reset_type = efi_reset_type;
+
+	return true;
+}
+
+/*
+ * Whitelist of EFI capsule flags that we support.
+ *
+ * We do not handle EFI_CAPSULE_INITIATE_RESET because that would
+ * require us to prepare the kernel for reboot. Refuse to load any
+ * capsules with that flag and any other flags that we do not know how
+ * to handle.
+ */
+#define EFI_CAPSULE_SUPPORTED_FLAG_MASK			\
+	(EFI_CAPSULE_PERSIST_ACROSS_RESET | EFI_CAPSULE_POPULATE_SYSTEM_TABLE)
+
+/**
+ * efi_capsule_supported - does the firmware support the capsule?
+ * @guid: vendor guid of capsule
+ * @flags: capsule flags
+ * @size: size of capsule data
+ * @reset: the reset type required for this capsule
+ *
+ * Check whether a capsule with @flags is supported by the firmware
+ * and that @size doesn't exceed the maximum size for a capsule.
+ *
+ * No attempt is made to check @reset against the reset type required
+ * by any pending capsules because of the races involved.
+ */
+int efi_capsule_supported(efi_guid_t guid, u32 flags, size_t size, int *reset)
+{
+	efi_capsule_header_t capsule;
+	efi_capsule_header_t *cap_list[] = { &capsule };
+	efi_status_t status;
+	u64 max_size;
+
+	if (flags & ~EFI_CAPSULE_SUPPORTED_FLAG_MASK)
+		return -EINVAL;
+
+	capsule.headersize = capsule.imagesize = sizeof(capsule);
+	memcpy(&capsule.guid, &guid, sizeof(efi_guid_t));
+	capsule.flags = flags;
+
+	status = efi.query_capsule_caps(cap_list, 1, &max_size, reset);
+	if (status != EFI_SUCCESS)
+		return efi_status_to_err(status);
+
+	if (size > max_size)
+		return -ENOSPC;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efi_capsule_supported);
+
+/*
+ * Every scatter gather list (block descriptor) page must end with a
+ * continuation pointer. The last continuation pointer of the last
+ * page must be zero to mark the end of the chain.
+ */
+#define SGLIST_PER_PAGE	((PAGE_SIZE / sizeof(efi_capsule_block_desc_t)) - 1)
+
+/*
+ * How many scatter gather list (block descriptor) pages do we need
+ * to map @count pages?
+ */
+static inline unsigned int sg_pages_num(unsigned int count)
+{
+	return DIV_ROUND_UP(count, SGLIST_PER_PAGE);
+}
+
+/**
+ * efi_capsule_update_locked - pass a single capsule to the firmware
+ * @capsule: capsule to send to the firmware
+ * @sg_pages: array of scatter gather (block descriptor) pages
+ * @reset: the reset type required for @capsule
+ *
+ * Since this function must be called under capsule_mutex check
+ * whether efi_reset_type will conflict with @reset, and atomically
+ * set it and capsule_pending if a capsule was successfully sent to
+ * the firmware.
+ *
+ * We also check to see if the system is about to restart, and if so,
+ * abort. This avoids races between efi_capsule_update() and
+ * efi_capsule_pending().
+ */
+static int
+efi_capsule_update_locked(efi_capsule_header_t *capsule,
+			  struct page **sg_pages, int reset)
+{
+	efi_physical_addr_t sglist_phys;
+	efi_status_t status;
+
+	lockdep_assert_held(&capsule_mutex);
+
+	/*
+	 * If someone has already registered a capsule that requires a
+	 * different reset type, we're out of luck and must abort.
+	 */
+	if (efi_reset_type >= 0 && efi_reset_type != reset) {
+		pr_err("Conflicting capsule reset type %d (%d).\n",
+		       reset, efi_reset_type);
+		return -EINVAL;
+	}
+
+	/*
+	 * If the system is getting ready to restart it may have
+	 * called efi_capsule_pending() to make decisions (such as
+	 * whether to force an EFI reboot), and we're racing against
+	 * that call. Abort in that case.
+	 */
+	if (unlikely(stop_capsules)) {
+		pr_warn("Capsule update raced with reboot, aborting.\n");
+		return -EINVAL;
+	}
+
+	sglist_phys = page_to_phys(sg_pages[0]);
+
+	status = efi.update_capsule(&capsule, 1, sglist_phys);
+	if (status == EFI_SUCCESS) {
+		capsule_pending = true;
+		efi_reset_type = reset;
+	}
+
+	return efi_status_to_err(status);
+}
+
+/**
+ * efi_capsule_update - send a capsule to the firmware
+ * @capsule: capsule to send to firmware
+ * @pages: an array of capsule data pages
+ *
+ * Build a scatter gather list with EFI capsule block descriptors to
+ * map the capsule described by @capsule with its data in @pages and
+ * send it to the firmware via the UpdateCapsule() runtime service.
+ *
+ * @capsule must be a virtual mapping of the complete capsule update in the
+ * kernel address space, as the capsule can be consumed immediately.
+ * A capsule_header_t that describes the entire contents of the capsule
+ * must be at the start of the first data page.
+ *
+ * Even though this function will validate that the firmware supports
+ * the capsule guid, users will likely want to check that
+ * efi_capsule_supported() returns true before calling this function
+ * because it makes it easier to print helpful error messages.
+ *
+ * If the capsule is successfully submitted to the firmware, any
+ * subsequent calls to efi_capsule_pending() will return true. @pages
+ * must not be released or modified if this function returns
+ * successfully.
+ *
+ * Callers must be prepared for this function to fail, which can
+ * happen if we raced with system reboot or if there is already a
+ * pending capsule that has a reset type that conflicts with the one
+ * required by @capsule. Do NOT use efi_capsule_pending() to detect
+ * this conflict since that would be racy. Instead, submit the capsule
+ * to efi_capsule_update() and check the return value.
+ *
+ * Return 0 on success, a converted EFI status code on failure.
+ */
+int efi_capsule_update(efi_capsule_header_t *capsule, phys_addr_t *pages)
+{
+	u32 imagesize = capsule->imagesize;
+	efi_guid_t guid = capsule->guid;
+	unsigned int count, sg_count;
+	u32 flags = capsule->flags;
+	struct page **sg_pages;
+	int rv, reset_type;
+	int i, j;
+
+	rv = efi_capsule_supported(guid, flags, imagesize, &reset_type);
+	if (rv)
+		return rv;
+
+	count = DIV_ROUND_UP(imagesize, PAGE_SIZE);
+	sg_count = sg_pages_num(count);
+
+	sg_pages = kcalloc(sg_count, sizeof(*sg_pages), GFP_KERNEL);
+	if (!sg_pages)
+		return -ENOMEM;
+
+	for (i = 0; i < sg_count; i++) {
+		sg_pages[i] = alloc_page(GFP_KERNEL);
+		if (!sg_pages[i]) {
+			rv = -ENOMEM;
+			goto out;
+		}
+	}
+
+	for (i = 0; i < sg_count; i++) {
+		efi_capsule_block_desc_t *sglist;
+
+		sglist = kmap(sg_pages[i]);
+
+		for (j = 0; j < SGLIST_PER_PAGE && count > 0; j++) {
+			u64 sz = min_t(u64, imagesize,
+				       PAGE_SIZE - (u64)*pages % PAGE_SIZE);
+
+			sglist[j].length = sz;
+			sglist[j].data = *pages++;
+
+			imagesize -= sz;
+			count--;
+		}
+
+		/* Continuation pointer */
+		sglist[j].length = 0;
+
+		if (i + 1 == sg_count)
+			sglist[j].data = 0;
+		else
+			sglist[j].data = page_to_phys(sg_pages[i + 1]);
+
+		kunmap(sg_pages[i]);
+	}
+
+	mutex_lock(&capsule_mutex);
+	rv = efi_capsule_update_locked(capsule, sg_pages, reset_type);
+	mutex_unlock(&capsule_mutex);
+
+out:
+	for (i = 0; rv && i < sg_count; i++) {
+		if (sg_pages[i])
+			__free_page(sg_pages[i]);
+	}
+
+	kfree(sg_pages);
+	return rv;
+}
+EXPORT_SYMBOL_GPL(efi_capsule_update);
+
+static int capsule_reboot_notify(struct notifier_block *nb, unsigned long event, void *cmd)
+{
+	mutex_lock(&capsule_mutex);
+	stop_capsules = true;
+	mutex_unlock(&capsule_mutex);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block capsule_reboot_nb = {
+	.notifier_call = capsule_reboot_notify,
+};
+
+static int __init capsule_reboot_register(void)
+{
+	return register_reboot_notifier(&capsule_reboot_nb);
+}
+core_initcall(capsule_reboot_register);
diff --git a/drivers/firmware/efi/cper-arm.c b/drivers/firmware/efi/cper-arm.c
new file mode 100644
index 000000000..36d3b8b9d
--- /dev/null
+++ b/drivers/firmware/efi/cper-arm.c
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UEFI Common Platform Error Record (CPER) support
+ *
+ * Copyright (C) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/cper.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/printk.h>
+#include <linux/bcd.h>
+#include <acpi/ghes.h>
+#include <ras/ras_event.h>
+
+static const char * const arm_reg_ctx_strs[] = {
+	"AArch32 general purpose registers",
+	"AArch32 EL1 context registers",
+	"AArch32 EL2 context registers",
+	"AArch32 secure context registers",
+	"AArch64 general purpose registers",
+	"AArch64 EL1 context registers",
+	"AArch64 EL2 context registers",
+	"AArch64 EL3 context registers",
+	"Misc. system register structure",
+};
+
+static const char * const arm_err_trans_type_strs[] = {
+	"Instruction",
+	"Data Access",
+	"Generic",
+};
+
+static const char * const arm_bus_err_op_strs[] = {
+	"Generic error (type cannot be determined)",
+	"Generic read (type of instruction or data request cannot be determined)",
+	"Generic write (type of instruction of data request cannot be determined)",
+	"Data read",
+	"Data write",
+	"Instruction fetch",
+	"Prefetch",
+};
+
+static const char * const arm_cache_err_op_strs[] = {
+	"Generic error (type cannot be determined)",
+	"Generic read (type of instruction or data request cannot be determined)",
+	"Generic write (type of instruction of data request cannot be determined)",
+	"Data read",
+	"Data write",
+	"Instruction fetch",
+	"Prefetch",
+	"Eviction",
+	"Snooping (processor initiated a cache snoop that resulted in an error)",
+	"Snooped (processor raised a cache error caused by another processor or device snooping its cache)",
+	"Management",
+};
+
+static const char * const arm_tlb_err_op_strs[] = {
+	"Generic error (type cannot be determined)",
+	"Generic read (type of instruction or data request cannot be determined)",
+	"Generic write (type of instruction of data request cannot be determined)",
+	"Data read",
+	"Data write",
+	"Instruction fetch",
+	"Prefetch",
+	"Local management operation (processor initiated a TLB management operation that resulted in an error)",
+	"External management operation (processor raised a TLB error caused by another processor or device broadcasting TLB operations)",
+};
+
+static const char * const arm_bus_err_part_type_strs[] = {
+	"Local processor originated request",
+	"Local processor responded to request",
+	"Local processor observed",
+	"Generic",
+};
+
+static const char * const arm_bus_err_addr_space_strs[] = {
+	"External Memory Access",
+	"Internal Memory Access",
+	"Unknown",
+	"Device Memory Access",
+};
+
+static void cper_print_arm_err_info(const char *pfx, u32 type,
+				    u64 error_info)
+{
+	u8 trans_type, op_type, level, participation_type, address_space;
+	u16 mem_attributes;
+	bool proc_context_corrupt, corrected, precise_pc, restartable_pc;
+	bool time_out, access_mode;
+
+	/* If the type is unknown, bail. */
+	if (type > CPER_ARM_MAX_TYPE)
+		return;
+
+	/*
+	 * Vendor type errors have error information values that are vendor
+	 * specific.
+	 */
+	if (type == CPER_ARM_VENDOR_ERROR)
+		return;
+
+	if (error_info & CPER_ARM_ERR_VALID_TRANSACTION_TYPE) {
+		trans_type = ((error_info >> CPER_ARM_ERR_TRANSACTION_SHIFT)
+			      & CPER_ARM_ERR_TRANSACTION_MASK);
+		if (trans_type < ARRAY_SIZE(arm_err_trans_type_strs)) {
+			printk("%stransaction type: %s\n", pfx,
+			       arm_err_trans_type_strs[trans_type]);
+		}
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_OPERATION_TYPE) {
+		op_type = ((error_info >> CPER_ARM_ERR_OPERATION_SHIFT)
+			   & CPER_ARM_ERR_OPERATION_MASK);
+		switch (type) {
+		case CPER_ARM_CACHE_ERROR:
+			if (op_type < ARRAY_SIZE(arm_cache_err_op_strs)) {
+				printk("%soperation type: %s\n", pfx,
+				       arm_cache_err_op_strs[op_type]);
+			}
+			break;
+		case CPER_ARM_TLB_ERROR:
+			if (op_type < ARRAY_SIZE(arm_tlb_err_op_strs)) {
+				printk("%soperation type: %s\n", pfx,
+				       arm_tlb_err_op_strs[op_type]);
+			}
+			break;
+		case CPER_ARM_BUS_ERROR:
+			if (op_type < ARRAY_SIZE(arm_bus_err_op_strs)) {
+				printk("%soperation type: %s\n", pfx,
+				       arm_bus_err_op_strs[op_type]);
+			}
+			break;
+		}
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_LEVEL) {
+		level = ((error_info >> CPER_ARM_ERR_LEVEL_SHIFT)
+			 & CPER_ARM_ERR_LEVEL_MASK);
+		switch (type) {
+		case CPER_ARM_CACHE_ERROR:
+			printk("%scache level: %d\n", pfx, level);
+			break;
+		case CPER_ARM_TLB_ERROR:
+			printk("%sTLB level: %d\n", pfx, level);
+			break;
+		case CPER_ARM_BUS_ERROR:
+			printk("%saffinity level at which the bus error occurred: %d\n",
+			       pfx, level);
+			break;
+		}
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_PROC_CONTEXT_CORRUPT) {
+		proc_context_corrupt = ((error_info >> CPER_ARM_ERR_PC_CORRUPT_SHIFT)
+					& CPER_ARM_ERR_PC_CORRUPT_MASK);
+		if (proc_context_corrupt)
+			printk("%sprocessor context corrupted\n", pfx);
+		else
+			printk("%sprocessor context not corrupted\n", pfx);
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_CORRECTED) {
+		corrected = ((error_info >> CPER_ARM_ERR_CORRECTED_SHIFT)
+			     & CPER_ARM_ERR_CORRECTED_MASK);
+		if (corrected)
+			printk("%sthe error has been corrected\n", pfx);
+		else
+			printk("%sthe error has not been corrected\n", pfx);
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_PRECISE_PC) {
+		precise_pc = ((error_info >> CPER_ARM_ERR_PRECISE_PC_SHIFT)
+			      & CPER_ARM_ERR_PRECISE_PC_MASK);
+		if (precise_pc)
+			printk("%sPC is precise\n", pfx);
+		else
+			printk("%sPC is imprecise\n", pfx);
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_RESTARTABLE_PC) {
+		restartable_pc = ((error_info >> CPER_ARM_ERR_RESTARTABLE_PC_SHIFT)
+				  & CPER_ARM_ERR_RESTARTABLE_PC_MASK);
+		if (restartable_pc)
+			printk("%sProgram execution can be restarted reliably at the PC associated with the error.\n", pfx);
+	}
+
+	/* The rest of the fields are specific to bus errors */
+	if (type != CPER_ARM_BUS_ERROR)
+		return;
+
+	if (error_info & CPER_ARM_ERR_VALID_PARTICIPATION_TYPE) {
+		participation_type = ((error_info >> CPER_ARM_ERR_PARTICIPATION_TYPE_SHIFT)
+				      & CPER_ARM_ERR_PARTICIPATION_TYPE_MASK);
+		if (participation_type < ARRAY_SIZE(arm_bus_err_part_type_strs)) {
+			printk("%sparticipation type: %s\n", pfx,
+			       arm_bus_err_part_type_strs[participation_type]);
+		}
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_TIME_OUT) {
+		time_out = ((error_info >> CPER_ARM_ERR_TIME_OUT_SHIFT)
+			    & CPER_ARM_ERR_TIME_OUT_MASK);
+		if (time_out)
+			printk("%srequest timed out\n", pfx);
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_ADDRESS_SPACE) {
+		address_space = ((error_info >> CPER_ARM_ERR_ADDRESS_SPACE_SHIFT)
+				 & CPER_ARM_ERR_ADDRESS_SPACE_MASK);
+		if (address_space < ARRAY_SIZE(arm_bus_err_addr_space_strs)) {
+			printk("%saddress space: %s\n", pfx,
+			       arm_bus_err_addr_space_strs[address_space]);
+		}
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_MEM_ATTRIBUTES) {
+		mem_attributes = ((error_info >> CPER_ARM_ERR_MEM_ATTRIBUTES_SHIFT)
+				  & CPER_ARM_ERR_MEM_ATTRIBUTES_MASK);
+		printk("%smemory access attributes:0x%x\n", pfx, mem_attributes);
+	}
+
+	if (error_info & CPER_ARM_ERR_VALID_ACCESS_MODE) {
+		access_mode = ((error_info >> CPER_ARM_ERR_ACCESS_MODE_SHIFT)
+			       & CPER_ARM_ERR_ACCESS_MODE_MASK);
+		if (access_mode)
+			printk("%saccess mode: normal\n", pfx);
+		else
+			printk("%saccess mode: secure\n", pfx);
+	}
+}
+
+void cper_print_proc_arm(const char *pfx,
+			 const struct cper_sec_proc_arm *proc)
+{
+	int i, len, max_ctx_type;
+	struct cper_arm_err_info *err_info;
+	struct cper_arm_ctx_info *ctx_info;
+	char newpfx[64], infopfx[64];
+
+	printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
+
+	len = proc->section_length - (sizeof(*proc) +
+		proc->err_info_num * (sizeof(*err_info)));
+	if (len < 0) {
+		printk("%ssection length: %d\n", pfx, proc->section_length);
+		printk("%ssection length is too small\n", pfx);
+		printk("%sfirmware-generated error record is incorrect\n", pfx);
+		printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
+		return;
+	}
+
+	if (proc->validation_bits & CPER_ARM_VALID_MPIDR)
+		printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n",
+			pfx, proc->mpidr);
+
+	if (proc->validation_bits & CPER_ARM_VALID_AFFINITY_LEVEL)
+		printk("%serror affinity level: %d\n", pfx,
+			proc->affinity_level);
+
+	if (proc->validation_bits & CPER_ARM_VALID_RUNNING_STATE) {
+		printk("%srunning state: 0x%x\n", pfx, proc->running_state);
+		printk("%sPower State Coordination Interface state: %d\n",
+			pfx, proc->psci_state);
+	}
+
+	snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
+
+	err_info = (struct cper_arm_err_info *)(proc + 1);
+	for (i = 0; i < proc->err_info_num; i++) {
+		printk("%sError info structure %d:\n", pfx, i);
+
+		printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1);
+
+		if (err_info->validation_bits & CPER_ARM_INFO_VALID_FLAGS) {
+			if (err_info->flags & CPER_ARM_INFO_FLAGS_FIRST)
+				printk("%sfirst error captured\n", newpfx);
+			if (err_info->flags & CPER_ARM_INFO_FLAGS_LAST)
+				printk("%slast error captured\n", newpfx);
+			if (err_info->flags & CPER_ARM_INFO_FLAGS_PROPAGATED)
+				printk("%spropagated error captured\n",
+				       newpfx);
+			if (err_info->flags & CPER_ARM_INFO_FLAGS_OVERFLOW)
+				printk("%soverflow occurred, error info is incomplete\n",
+				       newpfx);
+		}
+
+		printk("%serror_type: %d, %s\n", newpfx, err_info->type,
+			err_info->type < ARRAY_SIZE(cper_proc_error_type_strs) ?
+			cper_proc_error_type_strs[err_info->type] : "unknown");
+		if (err_info->validation_bits & CPER_ARM_INFO_VALID_ERR_INFO) {
+			printk("%serror_info: 0x%016llx\n", newpfx,
+			       err_info->error_info);
+			snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
+			cper_print_arm_err_info(infopfx, err_info->type,
+						err_info->error_info);
+		}
+		if (err_info->validation_bits & CPER_ARM_INFO_VALID_VIRT_ADDR)
+			printk("%svirtual fault address: 0x%016llx\n",
+				newpfx, err_info->virt_fault_addr);
+		if (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR)
+			printk("%sphysical fault address: 0x%016llx\n",
+				newpfx, err_info->physical_fault_addr);
+		err_info += 1;
+	}
+
+	ctx_info = (struct cper_arm_ctx_info *)err_info;
+	max_ctx_type = ARRAY_SIZE(arm_reg_ctx_strs) - 1;
+	for (i = 0; i < proc->context_info_num; i++) {
+		int size = sizeof(*ctx_info) + ctx_info->size;
+
+		printk("%sContext info structure %d:\n", pfx, i);
+		if (len < size) {
+			printk("%ssection length is too small\n", newpfx);
+			printk("%sfirmware-generated error record is incorrect\n", pfx);
+			return;
+		}
+		if (ctx_info->type > max_ctx_type) {
+			printk("%sInvalid context type: %d (max: %d)\n",
+				newpfx, ctx_info->type, max_ctx_type);
+			return;
+		}
+		printk("%sregister context type: %s\n", newpfx,
+			arm_reg_ctx_strs[ctx_info->type]);
+		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
+				(ctx_info + 1), ctx_info->size, 0);
+		len -= size;
+		ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + size);
+	}
+
+	if (len > 0) {
+		printk("%sVendor specific error info has %u bytes:\n", pfx,
+		       len);
+		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, ctx_info,
+				len, true);
+	}
+}
diff --git a/drivers/firmware/efi/cper-x86.c b/drivers/firmware/efi/cper-x86.c
new file mode 100644
index 000000000..2531de49f
--- /dev/null
+++ b/drivers/firmware/efi/cper-x86.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018, Advanced Micro Devices, Inc.
+
+#include <linux/cper.h>
+
+/*
+ * We don't need a "CPER_IA" prefix since these are all locally defined.
+ * This will save us a lot of line space.
+ */
+#define VALID_LAPIC_ID			BIT_ULL(0)
+#define VALID_CPUID_INFO		BIT_ULL(1)
+#define VALID_PROC_ERR_INFO_NUM(bits)	(((bits) & GENMASK_ULL(7, 2)) >> 2)
+#define VALID_PROC_CXT_INFO_NUM(bits)	(((bits) & GENMASK_ULL(13, 8)) >> 8)
+
+#define INFO_ERR_STRUCT_TYPE_CACHE					\
+	GUID_INIT(0xA55701F5, 0xE3EF, 0x43DE, 0xAC, 0x72, 0x24, 0x9B,	\
+		  0x57, 0x3F, 0xAD, 0x2C)
+#define INFO_ERR_STRUCT_TYPE_TLB					\
+	GUID_INIT(0xFC06B535, 0x5E1F, 0x4562, 0x9F, 0x25, 0x0A, 0x3B,	\
+		  0x9A, 0xDB, 0x63, 0xC3)
+#define INFO_ERR_STRUCT_TYPE_BUS					\
+	GUID_INIT(0x1CF3F8B3, 0xC5B1, 0x49a2, 0xAA, 0x59, 0x5E, 0xEF,	\
+		  0x92, 0xFF, 0xA6, 0x3C)
+#define INFO_ERR_STRUCT_TYPE_MS						\
+	GUID_INIT(0x48AB7F57, 0xDC34, 0x4f6c, 0xA7, 0xD3, 0xB0, 0xB5,	\
+		  0xB0, 0xA7, 0x43, 0x14)
+
+#define INFO_VALID_CHECK_INFO		BIT_ULL(0)
+#define INFO_VALID_TARGET_ID		BIT_ULL(1)
+#define INFO_VALID_REQUESTOR_ID		BIT_ULL(2)
+#define INFO_VALID_RESPONDER_ID		BIT_ULL(3)
+#define INFO_VALID_IP			BIT_ULL(4)
+
+#define CHECK_VALID_TRANS_TYPE		BIT_ULL(0)
+#define CHECK_VALID_OPERATION		BIT_ULL(1)
+#define CHECK_VALID_LEVEL		BIT_ULL(2)
+#define CHECK_VALID_PCC			BIT_ULL(3)
+#define CHECK_VALID_UNCORRECTED		BIT_ULL(4)
+#define CHECK_VALID_PRECISE_IP		BIT_ULL(5)
+#define CHECK_VALID_RESTARTABLE_IP	BIT_ULL(6)
+#define CHECK_VALID_OVERFLOW		BIT_ULL(7)
+
+#define CHECK_VALID_BUS_PART_TYPE	BIT_ULL(8)
+#define CHECK_VALID_BUS_TIME_OUT	BIT_ULL(9)
+#define CHECK_VALID_BUS_ADDR_SPACE	BIT_ULL(10)
+
+#define CHECK_VALID_BITS(check)		(((check) & GENMASK_ULL(15, 0)))
+#define CHECK_TRANS_TYPE(check)		(((check) & GENMASK_ULL(17, 16)) >> 16)
+#define CHECK_OPERATION(check)		(((check) & GENMASK_ULL(21, 18)) >> 18)
+#define CHECK_LEVEL(check)		(((check) & GENMASK_ULL(24, 22)) >> 22)
+#define CHECK_PCC			BIT_ULL(25)
+#define CHECK_UNCORRECTED		BIT_ULL(26)
+#define CHECK_PRECISE_IP		BIT_ULL(27)
+#define CHECK_RESTARTABLE_IP		BIT_ULL(28)
+#define CHECK_OVERFLOW			BIT_ULL(29)
+
+#define CHECK_BUS_PART_TYPE(check)	(((check) & GENMASK_ULL(31, 30)) >> 30)
+#define CHECK_BUS_TIME_OUT		BIT_ULL(32)
+#define CHECK_BUS_ADDR_SPACE(check)	(((check) & GENMASK_ULL(34, 33)) >> 33)
+
+#define CHECK_VALID_MS_ERR_TYPE		BIT_ULL(0)
+#define CHECK_VALID_MS_PCC		BIT_ULL(1)
+#define CHECK_VALID_MS_UNCORRECTED	BIT_ULL(2)
+#define CHECK_VALID_MS_PRECISE_IP	BIT_ULL(3)
+#define CHECK_VALID_MS_RESTARTABLE_IP	BIT_ULL(4)
+#define CHECK_VALID_MS_OVERFLOW		BIT_ULL(5)
+
+#define CHECK_MS_ERR_TYPE(check)	(((check) & GENMASK_ULL(18, 16)) >> 16)
+#define CHECK_MS_PCC			BIT_ULL(19)
+#define CHECK_MS_UNCORRECTED		BIT_ULL(20)
+#define CHECK_MS_PRECISE_IP		BIT_ULL(21)
+#define CHECK_MS_RESTARTABLE_IP		BIT_ULL(22)
+#define CHECK_MS_OVERFLOW		BIT_ULL(23)
+
+#define CTX_TYPE_MSR			1
+#define CTX_TYPE_MMREG			7
+
+enum err_types {
+	ERR_TYPE_CACHE = 0,
+	ERR_TYPE_TLB,
+	ERR_TYPE_BUS,
+	ERR_TYPE_MS,
+	N_ERR_TYPES
+};
+
+static enum err_types cper_get_err_type(const guid_t *err_type)
+{
+	if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_CACHE))
+		return ERR_TYPE_CACHE;
+	else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_TLB))
+		return ERR_TYPE_TLB;
+	else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_BUS))
+		return ERR_TYPE_BUS;
+	else if (guid_equal(err_type, &INFO_ERR_STRUCT_TYPE_MS))
+		return ERR_TYPE_MS;
+	else
+		return N_ERR_TYPES;
+}
+
+static const char * const ia_check_trans_type_strs[] = {
+	"Instruction",
+	"Data Access",
+	"Generic",
+};
+
+static const char * const ia_check_op_strs[] = {
+	"generic error",
+	"generic read",
+	"generic write",
+	"data read",
+	"data write",
+	"instruction fetch",
+	"prefetch",
+	"eviction",
+	"snoop",
+};
+
+static const char * const ia_check_bus_part_type_strs[] = {
+	"Local Processor originated request",
+	"Local Processor responded to request",
+	"Local Processor observed",
+	"Generic",
+};
+
+static const char * const ia_check_bus_addr_space_strs[] = {
+	"Memory Access",
+	"Reserved",
+	"I/O",
+	"Other Transaction",
+};
+
+static const char * const ia_check_ms_error_type_strs[] = {
+	"No Error",
+	"Unclassified",
+	"Microcode ROM Parity Error",
+	"External Error",
+	"FRC Error",
+	"Internal Unclassified",
+};
+
+static const char * const ia_reg_ctx_strs[] = {
+	"Unclassified Data",
+	"MSR Registers (Machine Check and other MSRs)",
+	"32-bit Mode Execution Context",
+	"64-bit Mode Execution Context",
+	"FXSAVE Context",
+	"32-bit Mode Debug Registers (DR0-DR7)",
+	"64-bit Mode Debug Registers (DR0-DR7)",
+	"Memory Mapped Registers",
+};
+
+static inline void print_bool(char *str, const char *pfx, u64 check, u64 bit)
+{
+	printk("%s%s: %s\n", pfx, str, (check & bit) ? "true" : "false");
+}
+
+static void print_err_info_ms(const char *pfx, u16 validation_bits, u64 check)
+{
+	if (validation_bits & CHECK_VALID_MS_ERR_TYPE) {
+		u8 err_type = CHECK_MS_ERR_TYPE(check);
+
+		printk("%sError Type: %u, %s\n", pfx, err_type,
+		       err_type < ARRAY_SIZE(ia_check_ms_error_type_strs) ?
+		       ia_check_ms_error_type_strs[err_type] : "unknown");
+	}
+
+	if (validation_bits & CHECK_VALID_MS_PCC)
+		print_bool("Processor Context Corrupt", pfx, check, CHECK_MS_PCC);
+
+	if (validation_bits & CHECK_VALID_MS_UNCORRECTED)
+		print_bool("Uncorrected", pfx, check, CHECK_MS_UNCORRECTED);
+
+	if (validation_bits & CHECK_VALID_MS_PRECISE_IP)
+		print_bool("Precise IP", pfx, check, CHECK_MS_PRECISE_IP);
+
+	if (validation_bits & CHECK_VALID_MS_RESTARTABLE_IP)
+		print_bool("Restartable IP", pfx, check, CHECK_MS_RESTARTABLE_IP);
+
+	if (validation_bits & CHECK_VALID_MS_OVERFLOW)
+		print_bool("Overflow", pfx, check, CHECK_MS_OVERFLOW);
+}
+
+static void print_err_info(const char *pfx, u8 err_type, u64 check)
+{
+	u16 validation_bits = CHECK_VALID_BITS(check);
+
+	/*
+	 * The MS Check structure varies a lot from the others, so use a
+	 * separate function for decoding.
+	 */
+	if (err_type == ERR_TYPE_MS)
+		return print_err_info_ms(pfx, validation_bits, check);
+
+	if (validation_bits & CHECK_VALID_TRANS_TYPE) {
+		u8 trans_type = CHECK_TRANS_TYPE(check);
+
+		printk("%sTransaction Type: %u, %s\n", pfx, trans_type,
+		       trans_type < ARRAY_SIZE(ia_check_trans_type_strs) ?
+		       ia_check_trans_type_strs[trans_type] : "unknown");
+	}
+
+	if (validation_bits & CHECK_VALID_OPERATION) {
+		u8 op = CHECK_OPERATION(check);
+
+		/*
+		 * CACHE has more operation types than TLB or BUS, though the
+		 * name and the order are the same.
+		 */
+		u8 max_ops = (err_type == ERR_TYPE_CACHE) ? 9 : 7;
+
+		printk("%sOperation: %u, %s\n", pfx, op,
+		       op < max_ops ? ia_check_op_strs[op] : "unknown");
+	}
+
+	if (validation_bits & CHECK_VALID_LEVEL)
+		printk("%sLevel: %llu\n", pfx, CHECK_LEVEL(check));
+
+	if (validation_bits & CHECK_VALID_PCC)
+		print_bool("Processor Context Corrupt", pfx, check, CHECK_PCC);
+
+	if (validation_bits & CHECK_VALID_UNCORRECTED)
+		print_bool("Uncorrected", pfx, check, CHECK_UNCORRECTED);
+
+	if (validation_bits & CHECK_VALID_PRECISE_IP)
+		print_bool("Precise IP", pfx, check, CHECK_PRECISE_IP);
+
+	if (validation_bits & CHECK_VALID_RESTARTABLE_IP)
+		print_bool("Restartable IP", pfx, check, CHECK_RESTARTABLE_IP);
+
+	if (validation_bits & CHECK_VALID_OVERFLOW)
+		print_bool("Overflow", pfx, check, CHECK_OVERFLOW);
+
+	if (err_type != ERR_TYPE_BUS)
+		return;
+
+	if (validation_bits & CHECK_VALID_BUS_PART_TYPE) {
+		u8 part_type = CHECK_BUS_PART_TYPE(check);
+
+		printk("%sParticipation Type: %u, %s\n", pfx, part_type,
+		       part_type < ARRAY_SIZE(ia_check_bus_part_type_strs) ?
+		       ia_check_bus_part_type_strs[part_type] : "unknown");
+	}
+
+	if (validation_bits & CHECK_VALID_BUS_TIME_OUT)
+		print_bool("Time Out", pfx, check, CHECK_BUS_TIME_OUT);
+
+	if (validation_bits & CHECK_VALID_BUS_ADDR_SPACE) {
+		u8 addr_space = CHECK_BUS_ADDR_SPACE(check);
+
+		printk("%sAddress Space: %u, %s\n", pfx, addr_space,
+		       addr_space < ARRAY_SIZE(ia_check_bus_addr_space_strs) ?
+		       ia_check_bus_addr_space_strs[addr_space] : "unknown");
+	}
+}
+
+void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
+{
+	int i;
+	struct cper_ia_err_info *err_info;
+	struct cper_ia_proc_ctx *ctx_info;
+	char newpfx[64], infopfx[64];
+	u8 err_type;
+
+	if (proc->validation_bits & VALID_LAPIC_ID)
+		printk("%sLocal APIC_ID: 0x%llx\n", pfx, proc->lapic_id);
+
+	if (proc->validation_bits & VALID_CPUID_INFO) {
+		printk("%sCPUID Info:\n", pfx);
+		print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, proc->cpuid,
+			       sizeof(proc->cpuid), 0);
+	}
+
+	snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
+
+	err_info = (struct cper_ia_err_info *)(proc + 1);
+	for (i = 0; i < VALID_PROC_ERR_INFO_NUM(proc->validation_bits); i++) {
+		printk("%sError Information Structure %d:\n", pfx, i);
+
+		err_type = cper_get_err_type(&err_info->err_type);
+		printk("%sError Structure Type: %s\n", newpfx,
+		       err_type < ARRAY_SIZE(cper_proc_error_type_strs) ?
+		       cper_proc_error_type_strs[err_type] : "unknown");
+
+		if (err_type >= N_ERR_TYPES) {
+			printk("%sError Structure Type: %pUl\n", newpfx,
+			       &err_info->err_type);
+		}
+
+		if (err_info->validation_bits & INFO_VALID_CHECK_INFO) {
+			printk("%sCheck Information: 0x%016llx\n", newpfx,
+			       err_info->check_info);
+
+			if (err_type < N_ERR_TYPES) {
+				snprintf(infopfx, sizeof(infopfx), "%s ",
+					 newpfx);
+
+				print_err_info(infopfx, err_type,
+					       err_info->check_info);
+			}
+		}
+
+		if (err_info->validation_bits & INFO_VALID_TARGET_ID) {
+			printk("%sTarget Identifier: 0x%016llx\n",
+			       newpfx, err_info->target_id);
+		}
+
+		if (err_info->validation_bits & INFO_VALID_REQUESTOR_ID) {
+			printk("%sRequestor Identifier: 0x%016llx\n",
+			       newpfx, err_info->requestor_id);
+		}
+
+		if (err_info->validation_bits & INFO_VALID_RESPONDER_ID) {
+			printk("%sResponder Identifier: 0x%016llx\n",
+			       newpfx, err_info->responder_id);
+		}
+
+		if (err_info->validation_bits & INFO_VALID_IP) {
+			printk("%sInstruction Pointer: 0x%016llx\n",
+			       newpfx, err_info->ip);
+		}
+
+		err_info++;
+	}
+
+	ctx_info = (struct cper_ia_proc_ctx *)err_info;
+	for (i = 0; i < VALID_PROC_CXT_INFO_NUM(proc->validation_bits); i++) {
+		int size = sizeof(*ctx_info) + ctx_info->reg_arr_size;
+		int groupsize = 4;
+
+		printk("%sContext Information Structure %d:\n", pfx, i);
+
+		printk("%sRegister Context Type: %s\n", newpfx,
+		       ctx_info->reg_ctx_type < ARRAY_SIZE(ia_reg_ctx_strs) ?
+		       ia_reg_ctx_strs[ctx_info->reg_ctx_type] : "unknown");
+
+		printk("%sRegister Array Size: 0x%04x\n", newpfx,
+		       ctx_info->reg_arr_size);
+
+		if (ctx_info->reg_ctx_type == CTX_TYPE_MSR) {
+			groupsize = 8; /* MSRs are 8 bytes wide. */
+			printk("%sMSR Address: 0x%08x\n", newpfx,
+			       ctx_info->msr_addr);
+		}
+
+		if (ctx_info->reg_ctx_type == CTX_TYPE_MMREG) {
+			printk("%sMM Register Address: 0x%016llx\n", newpfx,
+			       ctx_info->mm_reg_addr);
+		}
+
+		printk("%sRegister Array:\n", newpfx);
+		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, groupsize,
+			       (ctx_info + 1), ctx_info->reg_arr_size, 0);
+
+		ctx_info = (struct cper_ia_proc_ctx *)((long)ctx_info + size);
+	}
+}
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
new file mode 100644
index 000000000..232c092c4
--- /dev/null
+++ b/drivers/firmware/efi/cper.c
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * UEFI Common Platform Error Record (CPER) support
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Author: Huang Ying <ying.huang@intel.com>
+ *
+ * CPER is the format used to describe platform hardware error by
+ * various tables, such as ERST, BERT and HEST etc.
+ *
+ * For more information about CPER, please refer to Appendix N of UEFI
+ * Specification version 2.4.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/cper.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/printk.h>
+#include <linux/bcd.h>
+#include <acpi/ghes.h>
+#include <ras/ras_event.h>
+
+/*
+ * CPER record ID need to be unique even after reboot, because record
+ * ID is used as index for ERST storage, while CPER records from
+ * multiple boot may co-exist in ERST.
+ */
+u64 cper_next_record_id(void)
+{
+	static atomic64_t seq;
+
+	if (!atomic64_read(&seq)) {
+		time64_t time = ktime_get_real_seconds();
+
+		/*
+		 * This code is unlikely to still be needed in year 2106,
+		 * but just in case, let's use a few more bits for timestamps
+		 * after y2038 to be sure they keep increasing monotonically
+		 * for the next few hundred years...
+		 */
+		if (time < 0x80000000)
+			atomic64_set(&seq, (ktime_get_real_seconds()) << 32);
+		else
+			atomic64_set(&seq, 0x8000000000000000ull |
+					   ktime_get_real_seconds() << 24);
+	}
+
+	return atomic64_inc_return(&seq);
+}
+EXPORT_SYMBOL_GPL(cper_next_record_id);
+
+static const char * const severity_strs[] = {
+	"recoverable",
+	"fatal",
+	"corrected",
+	"info",
+};
+
+const char *cper_severity_str(unsigned int severity)
+{
+	return severity < ARRAY_SIZE(severity_strs) ?
+		severity_strs[severity] : "unknown";
+}
+EXPORT_SYMBOL_GPL(cper_severity_str);
+
+/*
+ * cper_print_bits - print strings for set bits
+ * @pfx: prefix for each line, including log level and prefix string
+ * @bits: bit mask
+ * @strs: string array, indexed by bit position
+ * @strs_size: size of the string array: @strs
+ *
+ * For each set bit in @bits, print the corresponding string in @strs.
+ * If the output length is longer than 80, multiple line will be
+ * printed, with @pfx is printed at the beginning of each line.
+ */
+void cper_print_bits(const char *pfx, unsigned int bits,
+		     const char * const strs[], unsigned int strs_size)
+{
+	int i, len = 0;
+	const char *str;
+	char buf[84];
+
+	for (i = 0; i < strs_size; i++) {
+		if (!(bits & (1U << i)))
+			continue;
+		str = strs[i];
+		if (!str)
+			continue;
+		if (len && len + strlen(str) + 2 > 80) {
+			printk("%s\n", buf);
+			len = 0;
+		}
+		if (!len)
+			len = snprintf(buf, sizeof(buf), "%s%s", pfx, str);
+		else
+			len += scnprintf(buf+len, sizeof(buf)-len, ", %s", str);
+	}
+	if (len)
+		printk("%s\n", buf);
+}
+
+static const char * const proc_type_strs[] = {
+	"IA32/X64",
+	"IA64",
+	"ARM",
+};
+
+static const char * const proc_isa_strs[] = {
+	"IA32",
+	"IA64",
+	"X64",
+	"ARM A32/T32",
+	"ARM A64",
+};
+
+const char * const cper_proc_error_type_strs[] = {
+	"cache error",
+	"TLB error",
+	"bus error",
+	"micro-architectural error",
+};
+
+static const char * const proc_op_strs[] = {
+	"unknown or generic",
+	"data read",
+	"data write",
+	"instruction execution",
+};
+
+static const char * const proc_flag_strs[] = {
+	"restartable",
+	"precise IP",
+	"overflow",
+	"corrected",
+};
+
+static void cper_print_proc_generic(const char *pfx,
+				    const struct cper_sec_proc_generic *proc)
+{
+	if (proc->validation_bits & CPER_PROC_VALID_TYPE)
+		printk("%s""processor_type: %d, %s\n", pfx, proc->proc_type,
+		       proc->proc_type < ARRAY_SIZE(proc_type_strs) ?
+		       proc_type_strs[proc->proc_type] : "unknown");
+	if (proc->validation_bits & CPER_PROC_VALID_ISA)
+		printk("%s""processor_isa: %d, %s\n", pfx, proc->proc_isa,
+		       proc->proc_isa < ARRAY_SIZE(proc_isa_strs) ?
+		       proc_isa_strs[proc->proc_isa] : "unknown");
+	if (proc->validation_bits & CPER_PROC_VALID_ERROR_TYPE) {
+		printk("%s""error_type: 0x%02x\n", pfx, proc->proc_error_type);
+		cper_print_bits(pfx, proc->proc_error_type,
+				cper_proc_error_type_strs,
+				ARRAY_SIZE(cper_proc_error_type_strs));
+	}
+	if (proc->validation_bits & CPER_PROC_VALID_OPERATION)
+		printk("%s""operation: %d, %s\n", pfx, proc->operation,
+		       proc->operation < ARRAY_SIZE(proc_op_strs) ?
+		       proc_op_strs[proc->operation] : "unknown");
+	if (proc->validation_bits & CPER_PROC_VALID_FLAGS) {
+		printk("%s""flags: 0x%02x\n", pfx, proc->flags);
+		cper_print_bits(pfx, proc->flags, proc_flag_strs,
+				ARRAY_SIZE(proc_flag_strs));
+	}
+	if (proc->validation_bits & CPER_PROC_VALID_LEVEL)
+		printk("%s""level: %d\n", pfx, proc->level);
+	if (proc->validation_bits & CPER_PROC_VALID_VERSION)
+		printk("%s""version_info: 0x%016llx\n", pfx, proc->cpu_version);
+	if (proc->validation_bits & CPER_PROC_VALID_ID)
+		printk("%s""processor_id: 0x%016llx\n", pfx, proc->proc_id);
+	if (proc->validation_bits & CPER_PROC_VALID_TARGET_ADDRESS)
+		printk("%s""target_address: 0x%016llx\n",
+		       pfx, proc->target_addr);
+	if (proc->validation_bits & CPER_PROC_VALID_REQUESTOR_ID)
+		printk("%s""requestor_id: 0x%016llx\n",
+		       pfx, proc->requestor_id);
+	if (proc->validation_bits & CPER_PROC_VALID_RESPONDER_ID)
+		printk("%s""responder_id: 0x%016llx\n",
+		       pfx, proc->responder_id);
+	if (proc->validation_bits & CPER_PROC_VALID_IP)
+		printk("%s""IP: 0x%016llx\n", pfx, proc->ip);
+}
+
+static const char * const mem_err_type_strs[] = {
+	"unknown",
+	"no error",
+	"single-bit ECC",
+	"multi-bit ECC",
+	"single-symbol chipkill ECC",
+	"multi-symbol chipkill ECC",
+	"master abort",
+	"target abort",
+	"parity error",
+	"watchdog timeout",
+	"invalid address",
+	"mirror Broken",
+	"memory sparing",
+	"scrub corrected error",
+	"scrub uncorrected error",
+	"physical memory map-out event",
+};
+
+const char *cper_mem_err_type_str(unsigned int etype)
+{
+	return etype < ARRAY_SIZE(mem_err_type_strs) ?
+		mem_err_type_strs[etype] : "unknown";
+}
+EXPORT_SYMBOL_GPL(cper_mem_err_type_str);
+
+static int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
+{
+	u32 len, n;
+
+	if (!msg)
+		return 0;
+
+	n = 0;
+	len = CPER_REC_LEN - 1;
+	if (mem->validation_bits & CPER_MEM_VALID_NODE)
+		n += scnprintf(msg + n, len - n, "node: %d ", mem->node);
+	if (mem->validation_bits & CPER_MEM_VALID_CARD)
+		n += scnprintf(msg + n, len - n, "card: %d ", mem->card);
+	if (mem->validation_bits & CPER_MEM_VALID_MODULE)
+		n += scnprintf(msg + n, len - n, "module: %d ", mem->module);
+	if (mem->validation_bits & CPER_MEM_VALID_RANK_NUMBER)
+		n += scnprintf(msg + n, len - n, "rank: %d ", mem->rank);
+	if (mem->validation_bits & CPER_MEM_VALID_BANK)
+		n += scnprintf(msg + n, len - n, "bank: %d ", mem->bank);
+	if (mem->validation_bits & CPER_MEM_VALID_BANK_GROUP)
+		n += scnprintf(msg + n, len - n, "bank_group: %d ",
+			       mem->bank >> CPER_MEM_BANK_GROUP_SHIFT);
+	if (mem->validation_bits & CPER_MEM_VALID_BANK_ADDRESS)
+		n += scnprintf(msg + n, len - n, "bank_address: %d ",
+			       mem->bank & CPER_MEM_BANK_ADDRESS_MASK);
+	if (mem->validation_bits & CPER_MEM_VALID_DEVICE)
+		n += scnprintf(msg + n, len - n, "device: %d ", mem->device);
+	if (mem->validation_bits & (CPER_MEM_VALID_ROW | CPER_MEM_VALID_ROW_EXT)) {
+		u32 row = mem->row;
+
+		row |= cper_get_mem_extension(mem->validation_bits, mem->extended);
+		n += scnprintf(msg + n, len - n, "row: %d ", row);
+	}
+	if (mem->validation_bits & CPER_MEM_VALID_COLUMN)
+		n += scnprintf(msg + n, len - n, "column: %d ", mem->column);
+	if (mem->validation_bits & CPER_MEM_VALID_BIT_POSITION)
+		n += scnprintf(msg + n, len - n, "bit_position: %d ",
+			       mem->bit_pos);
+	if (mem->validation_bits & CPER_MEM_VALID_REQUESTOR_ID)
+		n += scnprintf(msg + n, len - n, "requestor_id: 0x%016llx ",
+			       mem->requestor_id);
+	if (mem->validation_bits & CPER_MEM_VALID_RESPONDER_ID)
+		n += scnprintf(msg + n, len - n, "responder_id: 0x%016llx ",
+			       mem->responder_id);
+	if (mem->validation_bits & CPER_MEM_VALID_TARGET_ID)
+		scnprintf(msg + n, len - n, "target_id: 0x%016llx ",
+			  mem->target_id);
+	if (mem->validation_bits & CPER_MEM_VALID_CHIP_ID)
+		scnprintf(msg + n, len - n, "chip_id: %d ",
+			  mem->extended >> CPER_MEM_CHIP_ID_SHIFT);
+
+	msg[n] = '\0';
+	return n;
+}
+
+static int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
+{
+	u32 len, n;
+	const char *bank = NULL, *device = NULL;
+
+	if (!msg || !(mem->validation_bits & CPER_MEM_VALID_MODULE_HANDLE))
+		return 0;
+
+	len = CPER_REC_LEN;
+	dmi_memdev_name(mem->mem_dev_handle, &bank, &device);
+	if (bank && device)
+		n = snprintf(msg, len, "DIMM location: %s %s ", bank, device);
+	else
+		n = snprintf(msg, len,
+			     "DIMM location: not present. DMI handle: 0x%.4x ",
+			     mem->mem_dev_handle);
+
+	return n;
+}
+
+void cper_mem_err_pack(const struct cper_sec_mem_err *mem,
+		       struct cper_mem_err_compact *cmem)
+{
+	cmem->validation_bits = mem->validation_bits;
+	cmem->node = mem->node;
+	cmem->card = mem->card;
+	cmem->module = mem->module;
+	cmem->bank = mem->bank;
+	cmem->device = mem->device;
+	cmem->row = mem->row;
+	cmem->column = mem->column;
+	cmem->bit_pos = mem->bit_pos;
+	cmem->requestor_id = mem->requestor_id;
+	cmem->responder_id = mem->responder_id;
+	cmem->target_id = mem->target_id;
+	cmem->extended = mem->extended;
+	cmem->rank = mem->rank;
+	cmem->mem_array_handle = mem->mem_array_handle;
+	cmem->mem_dev_handle = mem->mem_dev_handle;
+}
+
+const char *cper_mem_err_unpack(struct trace_seq *p,
+				struct cper_mem_err_compact *cmem)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+	char rcd_decode_str[CPER_REC_LEN];
+
+	if (cper_mem_err_location(cmem, rcd_decode_str))
+		trace_seq_printf(p, "%s", rcd_decode_str);
+	if (cper_dimm_err_location(cmem, rcd_decode_str))
+		trace_seq_printf(p, "%s", rcd_decode_str);
+	trace_seq_putc(p, '\0');
+
+	return ret;
+}
+
+static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem,
+	int len)
+{
+	struct cper_mem_err_compact cmem;
+	char rcd_decode_str[CPER_REC_LEN];
+
+	/* Don't trust UEFI 2.1/2.2 structure with bad validation bits */
+	if (len == sizeof(struct cper_sec_mem_err_old) &&
+	    (mem->validation_bits & ~(CPER_MEM_VALID_RANK_NUMBER - 1))) {
+		pr_err(FW_WARN "valid bits set for fields beyond structure\n");
+		return;
+	}
+	if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS)
+		printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status);
+	if (mem->validation_bits & CPER_MEM_VALID_PA)
+		printk("%s""physical_address: 0x%016llx\n",
+		       pfx, mem->physical_addr);
+	if (mem->validation_bits & CPER_MEM_VALID_PA_MASK)
+		printk("%s""physical_address_mask: 0x%016llx\n",
+		       pfx, mem->physical_addr_mask);
+	cper_mem_err_pack(mem, &cmem);
+	if (cper_mem_err_location(&cmem, rcd_decode_str))
+		printk("%s%s\n", pfx, rcd_decode_str);
+	if (mem->validation_bits & CPER_MEM_VALID_ERROR_TYPE) {
+		u8 etype = mem->error_type;
+		printk("%s""error_type: %d, %s\n", pfx, etype,
+		       cper_mem_err_type_str(etype));
+	}
+	if (cper_dimm_err_location(&cmem, rcd_decode_str))
+		printk("%s%s\n", pfx, rcd_decode_str);
+}
+
+static const char * const pcie_port_type_strs[] = {
+	"PCIe end point",
+	"legacy PCI end point",
+	"unknown",
+	"unknown",
+	"root port",
+	"upstream switch port",
+	"downstream switch port",
+	"PCIe to PCI/PCI-X bridge",
+	"PCI/PCI-X to PCIe bridge",
+	"root complex integrated endpoint device",
+	"root complex event collector",
+};
+
+static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
+			    const struct acpi_hest_generic_data *gdata)
+{
+	if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE)
+		printk("%s""port_type: %d, %s\n", pfx, pcie->port_type,
+		       pcie->port_type < ARRAY_SIZE(pcie_port_type_strs) ?
+		       pcie_port_type_strs[pcie->port_type] : "unknown");
+	if (pcie->validation_bits & CPER_PCIE_VALID_VERSION)
+		printk("%s""version: %d.%d\n", pfx,
+		       pcie->version.major, pcie->version.minor);
+	if (pcie->validation_bits & CPER_PCIE_VALID_COMMAND_STATUS)
+		printk("%s""command: 0x%04x, status: 0x%04x\n", pfx,
+		       pcie->command, pcie->status);
+	if (pcie->validation_bits & CPER_PCIE_VALID_DEVICE_ID) {
+		const __u8 *p;
+		printk("%s""device_id: %04x:%02x:%02x.%x\n", pfx,
+		       pcie->device_id.segment, pcie->device_id.bus,
+		       pcie->device_id.device, pcie->device_id.function);
+		printk("%s""slot: %d\n", pfx,
+		       pcie->device_id.slot >> CPER_PCIE_SLOT_SHIFT);
+		printk("%s""secondary_bus: 0x%02x\n", pfx,
+		       pcie->device_id.secondary_bus);
+		printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx,
+		       pcie->device_id.vendor_id, pcie->device_id.device_id);
+		p = pcie->device_id.class_code;
+		printk("%s""class_code: %02x%02x%02x\n", pfx, p[2], p[1], p[0]);
+	}
+	if (pcie->validation_bits & CPER_PCIE_VALID_SERIAL_NUMBER)
+		printk("%s""serial number: 0x%04x, 0x%04x\n", pfx,
+		       pcie->serial_number.lower, pcie->serial_number.upper);
+	if (pcie->validation_bits & CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS)
+		printk(
+	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
+	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
+
+	/* Fatal errors call __ghes_panic() before AER handler prints this */
+	if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) &&
+	    (gdata->error_severity & CPER_SEV_FATAL)) {
+		struct aer_capability_regs *aer;
+
+		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
+		       pfx, aer->uncor_status, aer->uncor_mask);
+		printk("%saer_uncor_severity: 0x%08x\n",
+		       pfx, aer->uncor_severity);
+		printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
+		       aer->header_log.dw0, aer->header_log.dw1,
+		       aer->header_log.dw2, aer->header_log.dw3);
+	}
+}
+
+static const char * const fw_err_rec_type_strs[] = {
+	"IPF SAL Error Record",
+	"SOC Firmware Error Record Type1 (Legacy CrashLog Support)",
+	"SOC Firmware Error Record Type2",
+};
+
+static void cper_print_fw_err(const char *pfx,
+			      struct acpi_hest_generic_data *gdata,
+			      const struct cper_sec_fw_err_rec_ref *fw_err)
+{
+	void *buf = acpi_hest_get_payload(gdata);
+	u32 offset, length = gdata->error_data_length;
+
+	printk("%s""Firmware Error Record Type: %s\n", pfx,
+	       fw_err->record_type < ARRAY_SIZE(fw_err_rec_type_strs) ?
+	       fw_err_rec_type_strs[fw_err->record_type] : "unknown");
+	printk("%s""Revision: %d\n", pfx, fw_err->revision);
+
+	/* Record Type based on UEFI 2.7 */
+	if (fw_err->revision == 0) {
+		printk("%s""Record Identifier: %08llx\n", pfx,
+		       fw_err->record_identifier);
+	} else if (fw_err->revision == 2) {
+		printk("%s""Record Identifier: %pUl\n", pfx,
+		       &fw_err->record_identifier_guid);
+	}
+
+	/*
+	 * The FW error record may contain trailing data beyond the
+	 * structure defined by the specification. As the fields
+	 * defined (and hence the offset of any trailing data) vary
+	 * with the revision, set the offset to account for this
+	 * variation.
+	 */
+	if (fw_err->revision == 0) {
+		/* record_identifier_guid not defined */
+		offset = offsetof(struct cper_sec_fw_err_rec_ref,
+				  record_identifier_guid);
+	} else if (fw_err->revision == 1) {
+		/* record_identifier not defined */
+		offset = offsetof(struct cper_sec_fw_err_rec_ref,
+				  record_identifier);
+	} else {
+		offset = sizeof(*fw_err);
+	}
+
+	buf += offset;
+	length -= offset;
+
+	print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, buf, length, true);
+}
+
+static void cper_print_tstamp(const char *pfx,
+				   struct acpi_hest_generic_data_v300 *gdata)
+{
+	__u8 hour, min, sec, day, mon, year, century, *timestamp;
+
+	if (gdata->validation_bits & ACPI_HEST_GEN_VALID_TIMESTAMP) {
+		timestamp = (__u8 *)&(gdata->time_stamp);
+		sec       = bcd2bin(timestamp[0]);
+		min       = bcd2bin(timestamp[1]);
+		hour      = bcd2bin(timestamp[2]);
+		day       = bcd2bin(timestamp[4]);
+		mon       = bcd2bin(timestamp[5]);
+		year      = bcd2bin(timestamp[6]);
+		century   = bcd2bin(timestamp[7]);
+
+		printk("%s%ststamp: %02d%02d-%02d-%02d %02d:%02d:%02d\n", pfx,
+		       (timestamp[3] & 0x1 ? "precise " : "imprecise "),
+		       century, year, mon, day, hour, min, sec);
+	}
+}
+
+static void
+cper_estatus_print_section(const char *pfx, struct acpi_hest_generic_data *gdata,
+			   int sec_no)
+{
+	guid_t *sec_type = (guid_t *)gdata->section_type;
+	__u16 severity;
+	char newpfx[64];
+
+	if (acpi_hest_get_version(gdata) >= 3)
+		cper_print_tstamp(pfx, (struct acpi_hest_generic_data_v300 *)gdata);
+
+	severity = gdata->error_severity;
+	printk("%s""Error %d, type: %s\n", pfx, sec_no,
+	       cper_severity_str(severity));
+	if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID)
+		printk("%s""fru_id: %pUl\n", pfx, gdata->fru_id);
+	if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT)
+		printk("%s""fru_text: %.20s\n", pfx, gdata->fru_text);
+
+	snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
+	if (guid_equal(sec_type, &CPER_SEC_PROC_GENERIC)) {
+		struct cper_sec_proc_generic *proc_err = acpi_hest_get_payload(gdata);
+
+		printk("%s""section_type: general processor error\n", newpfx);
+		if (gdata->error_data_length >= sizeof(*proc_err))
+			cper_print_proc_generic(newpfx, proc_err);
+		else
+			goto err_section_too_small;
+	} else if (guid_equal(sec_type, &CPER_SEC_PLATFORM_MEM)) {
+		struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
+
+		printk("%s""section_type: memory error\n", newpfx);
+		if (gdata->error_data_length >=
+		    sizeof(struct cper_sec_mem_err_old))
+			cper_print_mem(newpfx, mem_err,
+				       gdata->error_data_length);
+		else
+			goto err_section_too_small;
+	} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
+		struct cper_sec_pcie *pcie = acpi_hest_get_payload(gdata);
+
+		printk("%s""section_type: PCIe error\n", newpfx);
+		if (gdata->error_data_length >= sizeof(*pcie))
+			cper_print_pcie(newpfx, pcie, gdata);
+		else
+			goto err_section_too_small;
+#if defined(CONFIG_ARM64) || defined(CONFIG_ARM)
+	} else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
+		struct cper_sec_proc_arm *arm_err = acpi_hest_get_payload(gdata);
+
+		printk("%ssection_type: ARM processor error\n", newpfx);
+		if (gdata->error_data_length >= sizeof(*arm_err))
+			cper_print_proc_arm(newpfx, arm_err);
+		else
+			goto err_section_too_small;
+#endif
+#if defined(CONFIG_UEFI_CPER_X86)
+	} else if (guid_equal(sec_type, &CPER_SEC_PROC_IA)) {
+		struct cper_sec_proc_ia *ia_err = acpi_hest_get_payload(gdata);
+
+		printk("%ssection_type: IA32/X64 processor error\n", newpfx);
+		if (gdata->error_data_length >= sizeof(*ia_err))
+			cper_print_proc_ia(newpfx, ia_err);
+		else
+			goto err_section_too_small;
+#endif
+	} else if (guid_equal(sec_type, &CPER_SEC_FW_ERR_REC_REF)) {
+		struct cper_sec_fw_err_rec_ref *fw_err = acpi_hest_get_payload(gdata);
+
+		printk("%ssection_type: Firmware Error Record Reference\n",
+		       newpfx);
+		/* The minimal FW Error Record contains 16 bytes */
+		if (gdata->error_data_length >= SZ_16)
+			cper_print_fw_err(newpfx, gdata, fw_err);
+		else
+			goto err_section_too_small;
+	} else {
+		const void *err = acpi_hest_get_payload(gdata);
+
+		printk("%ssection type: unknown, %pUl\n", newpfx, sec_type);
+		printk("%ssection length: %#x\n", newpfx,
+		       gdata->error_data_length);
+		print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4, err,
+			       gdata->error_data_length, true);
+	}
+
+	return;
+
+err_section_too_small:
+	pr_err(FW_WARN "error section length is too small\n");
+}
+
+void cper_estatus_print(const char *pfx,
+			const struct acpi_hest_generic_status *estatus)
+{
+	struct acpi_hest_generic_data *gdata;
+	int sec_no = 0;
+	char newpfx[64];
+	__u16 severity;
+
+	severity = estatus->error_severity;
+	if (severity == CPER_SEV_CORRECTED)
+		printk("%s%s\n", pfx,
+		       "It has been corrected by h/w "
+		       "and requires no further action");
+	printk("%s""event severity: %s\n", pfx, cper_severity_str(severity));
+	snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
+
+	apei_estatus_for_each_section(estatus, gdata) {
+		cper_estatus_print_section(newpfx, gdata, sec_no);
+		sec_no++;
+	}
+}
+EXPORT_SYMBOL_GPL(cper_estatus_print);
+
+int cper_estatus_check_header(const struct acpi_hest_generic_status *estatus)
+{
+	if (estatus->data_length &&
+	    estatus->data_length < sizeof(struct acpi_hest_generic_data))
+		return -EINVAL;
+	if (estatus->raw_data_length &&
+	    estatus->raw_data_offset < sizeof(*estatus) + estatus->data_length)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cper_estatus_check_header);
+
+int cper_estatus_check(const struct acpi_hest_generic_status *estatus)
+{
+	struct acpi_hest_generic_data *gdata;
+	unsigned int data_len, record_size;
+	int rc;
+
+	rc = cper_estatus_check_header(estatus);
+	if (rc)
+		return rc;
+
+	data_len = estatus->data_length;
+
+	apei_estatus_for_each_section(estatus, gdata) {
+		if (sizeof(struct acpi_hest_generic_data) > data_len)
+			return -EINVAL;
+
+		record_size = acpi_hest_get_record_size(gdata);
+		if (record_size > data_len)
+			return -EINVAL;
+
+		data_len -= record_size;
+	}
+	if (data_len)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cper_estatus_check);
diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c
new file mode 100644
index 000000000..5c9625e55
--- /dev/null
+++ b/drivers/firmware/efi/dev-path-parser.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dev-path-parser.c - EFI Device Path parser
+ * Copyright (C) 2016 Lukas Wunner <lukas@wunner.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2) as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/pci.h>
+
+struct acpi_hid_uid {
+	struct acpi_device_id hid[2];
+	char uid[11]; /* UINT_MAX + null byte */
+};
+
+static int __init match_acpi_dev(struct device *dev, const void *data)
+{
+	struct acpi_hid_uid hid_uid = *(const struct acpi_hid_uid *)data;
+	struct acpi_device *adev = to_acpi_device(dev);
+
+	if (acpi_match_device_ids(adev, hid_uid.hid))
+		return 0;
+
+	if (adev->pnp.unique_id)
+		return !strcmp(adev->pnp.unique_id, hid_uid.uid);
+	else
+		return !strcmp("0", hid_uid.uid);
+}
+
+static long __init parse_acpi_path(const struct efi_dev_path *node,
+				   struct device *parent, struct device **child)
+{
+	struct acpi_hid_uid hid_uid = {};
+	struct device *phys_dev;
+
+	if (node->header.length != 12)
+		return -EINVAL;
+
+	sprintf(hid_uid.hid[0].id, "%c%c%c%04X",
+		'A' + ((node->acpi.hid >> 10) & 0x1f) - 1,
+		'A' + ((node->acpi.hid >>  5) & 0x1f) - 1,
+		'A' + ((node->acpi.hid >>  0) & 0x1f) - 1,
+			node->acpi.hid >> 16);
+	sprintf(hid_uid.uid, "%u", node->acpi.uid);
+
+	*child = bus_find_device(&acpi_bus_type, NULL, &hid_uid,
+				 match_acpi_dev);
+	if (!*child)
+		return -ENODEV;
+
+	phys_dev = acpi_get_first_physical_node(to_acpi_device(*child));
+	if (phys_dev) {
+		get_device(phys_dev);
+		put_device(*child);
+		*child = phys_dev;
+	}
+
+	return 0;
+}
+
+static int __init match_pci_dev(struct device *dev, void *data)
+{
+	unsigned int devfn = *(unsigned int *)data;
+
+	return dev_is_pci(dev) && to_pci_dev(dev)->devfn == devfn;
+}
+
+static long __init parse_pci_path(const struct efi_dev_path *node,
+				  struct device *parent, struct device **child)
+{
+	unsigned int devfn;
+
+	if (node->header.length != 6)
+		return -EINVAL;
+	if (!parent)
+		return -EINVAL;
+
+	devfn = PCI_DEVFN(node->pci.dev, node->pci.fn);
+
+	*child = device_find_child(parent, &devfn, match_pci_dev);
+	if (!*child)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Insert parsers for further node types here.
+ *
+ * Each parser takes a pointer to the @node and to the @parent (will be NULL
+ * for the first device path node). If a device corresponding to @node was
+ * found below @parent, its reference count should be incremented and the
+ * device returned in @child.
+ *
+ * The return value should be 0 on success or a negative int on failure.
+ * The special return values 0x01 (EFI_DEV_END_INSTANCE) and 0xFF
+ * (EFI_DEV_END_ENTIRE) signal the end of the device path, only
+ * parse_end_path() is supposed to return this.
+ *
+ * Be sure to validate the node length and contents before commencing the
+ * search for a device.
+ */
+
+static long __init parse_end_path(const struct efi_dev_path *node,
+				  struct device *parent, struct device **child)
+{
+	if (node->header.length != 4)
+		return -EINVAL;
+	if (node->header.sub_type != EFI_DEV_END_INSTANCE &&
+	    node->header.sub_type != EFI_DEV_END_ENTIRE)
+		return -EINVAL;
+	if (!parent)
+		return -ENODEV;
+
+	*child = get_device(parent);
+	return node->header.sub_type;
+}
+
+/**
+ * efi_get_device_by_path - find device by EFI Device Path
+ * @node: EFI Device Path
+ * @len: maximum length of EFI Device Path in bytes
+ *
+ * Parse a series of EFI Device Path nodes at @node and find the corresponding
+ * device.  If the device was found, its reference count is incremented and a
+ * pointer to it is returned.  The caller needs to drop the reference with
+ * put_device() after use.  The @node pointer is updated to point to the
+ * location immediately after the "End of Hardware Device Path" node.
+ *
+ * If another Device Path instance follows, @len is decremented by the number
+ * of bytes consumed.  Otherwise @len is set to %0.
+ *
+ * If a Device Path node is malformed or its corresponding device is not found,
+ * @node is updated to point to this offending node and an ERR_PTR is returned.
+ *
+ * If @len is initially %0, the function returns %NULL.  Thus, to iterate over
+ * all instances in a path, the following idiom may be used:
+ *
+ *	while (!IS_ERR_OR_NULL(dev = efi_get_device_by_path(&node, &len))) {
+ *		// do something with dev
+ *		put_device(dev);
+ *	}
+ *	if (IS_ERR(dev))
+ *		// report error
+ *
+ * Devices can only be found if they're already instantiated. Most buses
+ * instantiate devices in the "subsys" initcall level, hence the earliest
+ * initcall level in which this function should be called is "fs".
+ *
+ * Returns the device on success or
+ *	%ERR_PTR(-ENODEV) if no device was found,
+ *	%ERR_PTR(-EINVAL) if a node is malformed or exceeds @len,
+ *	%ERR_PTR(-ENOTSUPP) if support for a node type is not yet implemented.
+ */
+struct device * __init efi_get_device_by_path(const struct efi_dev_path **node,
+					      size_t *len)
+{
+	struct device *parent = NULL, *child;
+	long ret = 0;
+
+	if (!*len)
+		return NULL;
+
+	while (!ret) {
+		if (*len < 4 || *len < (*node)->header.length)
+			ret = -EINVAL;
+		else if ((*node)->header.type		== EFI_DEV_ACPI &&
+			 (*node)->header.sub_type	== EFI_DEV_BASIC_ACPI)
+			ret = parse_acpi_path(*node, parent, &child);
+		else if ((*node)->header.type		== EFI_DEV_HW &&
+			 (*node)->header.sub_type	== EFI_DEV_PCI)
+			ret = parse_pci_path(*node, parent, &child);
+		else if (((*node)->header.type		== EFI_DEV_END_PATH ||
+			  (*node)->header.type		== EFI_DEV_END_PATH2))
+			ret = parse_end_path(*node, parent, &child);
+		else
+			ret = -ENOTSUPP;
+
+		put_device(parent);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		parent = child;
+		*node  = (void *)*node + (*node)->header.length;
+		*len  -= (*node)->header.length;
+	}
+
+	if (ret == EFI_DEV_END_ENTIRE)
+		*len = 0;
+
+	return child;
+}
diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c
new file mode 100644
index 000000000..a52236e11
--- /dev/null
+++ b/drivers/firmware/efi/earlycon.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Intel Corporation; author Matt Fleming
+ */
+
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/font.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/serial_core.h>
+#include <linux/screen_info.h>
+
+#include <asm/early_ioremap.h>
+
+static const struct console *earlycon_console __initdata;
+static const struct font_desc *font;
+static u32 efi_x, efi_y;
+static u64 fb_base;
+static bool fb_wb;
+static void *efi_fb;
+
+/*
+ * EFI earlycon needs to use early_memremap() to map the framebuffer.
+ * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon',
+ * memremap() should be used instead. memremap() will be available after
+ * paging_init() which is earlier than initcall callbacks. Thus adding this
+ * early initcall function early_efi_map_fb() to map the whole EFI framebuffer.
+ */
+static int __init efi_earlycon_remap_fb(void)
+{
+	/* bail if there is no bootconsole or it has been disabled already */
+	if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED))
+		return 0;
+
+	efi_fb = memremap(fb_base, screen_info.lfb_size,
+			  fb_wb ? MEMREMAP_WB : MEMREMAP_WC);
+
+	return efi_fb ? 0 : -ENOMEM;
+}
+early_initcall(efi_earlycon_remap_fb);
+
+static int __init efi_earlycon_unmap_fb(void)
+{
+	/* unmap the bootconsole fb unless keep_bootcon has left it enabled */
+	if (efi_fb && !(earlycon_console->flags & CON_ENABLED))
+		memunmap(efi_fb);
+	return 0;
+}
+late_initcall(efi_earlycon_unmap_fb);
+
+static __ref void *efi_earlycon_map(unsigned long start, unsigned long len)
+{
+	pgprot_t fb_prot;
+
+	if (efi_fb)
+		return efi_fb + start;
+
+	fb_prot = fb_wb ? PAGE_KERNEL : pgprot_writecombine(PAGE_KERNEL);
+	return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot));
+}
+
+static __ref void efi_earlycon_unmap(void *addr, unsigned long len)
+{
+	if (efi_fb)
+		return;
+
+	early_memunmap(addr, len);
+}
+
+static void efi_earlycon_clear_scanline(unsigned int y)
+{
+	unsigned long *dst;
+	u16 len;
+
+	len = screen_info.lfb_linelength;
+	dst = efi_earlycon_map(y*len, len);
+	if (!dst)
+		return;
+
+	memset(dst, 0, len);
+	efi_earlycon_unmap(dst, len);
+}
+
+static void efi_earlycon_scroll_up(void)
+{
+	unsigned long *dst, *src;
+	u16 len;
+	u32 i, height;
+
+	len = screen_info.lfb_linelength;
+	height = screen_info.lfb_height;
+
+	for (i = 0; i < height - font->height; i++) {
+		dst = efi_earlycon_map(i*len, len);
+		if (!dst)
+			return;
+
+		src = efi_earlycon_map((i + font->height) * len, len);
+		if (!src) {
+			efi_earlycon_unmap(dst, len);
+			return;
+		}
+
+		memmove(dst, src, len);
+
+		efi_earlycon_unmap(src, len);
+		efi_earlycon_unmap(dst, len);
+	}
+}
+
+static void efi_earlycon_write_char(u32 *dst, unsigned char c, unsigned int h)
+{
+	const u32 color_black = 0x00000000;
+	const u32 color_white = 0x00ffffff;
+	const u8 *src;
+	int m, n, bytes;
+	u8 x;
+
+	bytes = BITS_TO_BYTES(font->width);
+	src = font->data + c * font->height * bytes + h * bytes;
+
+	for (m = 0; m < font->width; m++) {
+		n = m % 8;
+		x = *(src + m / 8);
+		if ((x >> (7 - n)) & 1)
+			*dst = color_white;
+		else
+			*dst = color_black;
+		dst++;
+	}
+}
+
+static void
+efi_earlycon_write(struct console *con, const char *str, unsigned int num)
+{
+	struct screen_info *si;
+	unsigned int len;
+	const char *s;
+	void *dst;
+
+	si = &screen_info;
+	len = si->lfb_linelength;
+
+	while (num) {
+		unsigned int linemax;
+		unsigned int h, count = 0;
+
+		for (s = str; *s && *s != '\n'; s++) {
+			if (count == num)
+				break;
+			count++;
+		}
+
+		linemax = (si->lfb_width - efi_x) / font->width;
+		if (count > linemax)
+			count = linemax;
+
+		for (h = 0; h < font->height; h++) {
+			unsigned int n, x;
+
+			dst = efi_earlycon_map((efi_y + h) * len, len);
+			if (!dst)
+				return;
+
+			s = str;
+			n = count;
+			x = efi_x;
+
+			while (n-- > 0) {
+				efi_earlycon_write_char(dst + x*4, *s, h);
+				x += font->width;
+				s++;
+			}
+
+			efi_earlycon_unmap(dst, len);
+		}
+
+		num -= count;
+		efi_x += count * font->width;
+		str += count;
+
+		if (num > 0 && *s == '\n') {
+			efi_x = 0;
+			efi_y += font->height;
+			str++;
+			num--;
+		}
+
+		if (efi_x + font->width > si->lfb_width) {
+			efi_x = 0;
+			efi_y += font->height;
+		}
+
+		if (efi_y + font->height > si->lfb_height) {
+			u32 i;
+
+			efi_y -= font->height;
+			efi_earlycon_scroll_up();
+
+			for (i = 0; i < font->height; i++)
+				efi_earlycon_clear_scanline(efi_y + i);
+		}
+	}
+}
+
+static int __init efi_earlycon_setup(struct earlycon_device *device,
+				     const char *opt)
+{
+	struct screen_info *si;
+	u16 xres, yres;
+	u32 i;
+
+	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
+		return -ENODEV;
+
+	fb_base = screen_info.lfb_base;
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		fb_base |= (u64)screen_info.ext_lfb_base << 32;
+
+	fb_wb = opt && !strcmp(opt, "ram");
+
+	si = &screen_info;
+	xres = si->lfb_width;
+	yres = si->lfb_height;
+
+	/*
+	 * efi_earlycon_write_char() implicitly assumes a framebuffer with
+	 * 32 bits per pixel.
+	 */
+	if (si->lfb_depth != 32)
+		return -ENODEV;
+
+	font = get_default_font(xres, yres, -1, -1);
+	if (!font)
+		return -ENODEV;
+
+	efi_y = rounddown(yres, font->height) - font->height;
+	for (i = 0; i < (yres - efi_y) / font->height; i++)
+		efi_earlycon_scroll_up();
+
+	device->con->write = efi_earlycon_write;
+	earlycon_console = device->con;
+	return 0;
+}
+EARLYCON_DECLARE(efifb, efi_earlycon_setup);
diff --git a/drivers/firmware/efi/efi-bgrt.c b/drivers/firmware/efi/efi-bgrt.c
new file mode 100644
index 000000000..6aafdb67d
--- /dev/null
+++ b/drivers/firmware/efi/efi-bgrt.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2012 Intel Corporation
+ * Author: Josh Triplett <josh@joshtriplett.org>
+ *
+ * Based on the bgrt driver:
+ * Copyright 2012 Red Hat, Inc <mjg@redhat.com>
+ * Author: Matthew Garrett
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/efi-bgrt.h>
+
+struct acpi_table_bgrt bgrt_tab;
+size_t bgrt_image_size;
+
+struct bmp_header {
+	u16 id;
+	u32 size;
+} __packed;
+
+void __init efi_bgrt_init(struct acpi_table_header *table)
+{
+	void *image;
+	struct bmp_header bmp_header;
+	struct acpi_table_bgrt *bgrt = &bgrt_tab;
+
+	if (acpi_disabled)
+		return;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return;
+
+	if (table->length < sizeof(bgrt_tab)) {
+		pr_notice("Ignoring BGRT: invalid length %u (expected %zu)\n",
+		       table->length, sizeof(bgrt_tab));
+		return;
+	}
+	*bgrt = *(struct acpi_table_bgrt *)table;
+	/*
+	 * Only version 1 is defined but some older laptops (seen on Lenovo
+	 * Ivy Bridge models) have a correct version 1 BGRT table with the
+	 * version set to 0, so we accept version 0 and 1.
+	 */
+	if (bgrt->version > 1) {
+		pr_notice("Ignoring BGRT: invalid version %u (expected 1)\n",
+		       bgrt->version);
+		goto out;
+	}
+	if (bgrt->image_type != 0) {
+		pr_notice("Ignoring BGRT: invalid image type %u (expected 0)\n",
+		       bgrt->image_type);
+		goto out;
+	}
+	if (!bgrt->image_address) {
+		pr_notice("Ignoring BGRT: null image address\n");
+		goto out;
+	}
+
+	if (efi_mem_type(bgrt->image_address) != EFI_BOOT_SERVICES_DATA) {
+		pr_notice("Ignoring BGRT: invalid image address\n");
+		goto out;
+	}
+	image = early_memremap(bgrt->image_address, sizeof(bmp_header));
+	if (!image) {
+		pr_notice("Ignoring BGRT: failed to map image header memory\n");
+		goto out;
+	}
+
+	memcpy(&bmp_header, image, sizeof(bmp_header));
+	early_memunmap(image, sizeof(bmp_header));
+	if (bmp_header.id != 0x4d42) {
+		pr_notice("Ignoring BGRT: Incorrect BMP magic number 0x%x (expected 0x4d42)\n",
+			bmp_header.id);
+		goto out;
+	}
+	bgrt_image_size = bmp_header.size;
+	efi_mem_reserve(bgrt->image_address, bgrt_image_size);
+
+	return;
+out:
+	memset(bgrt, 0, sizeof(bgrt_tab));
+}
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c
new file mode 100644
index 000000000..f55a92ff1
--- /dev/null
+++ b/drivers/firmware/efi/efi-init.c
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Extensible Firmware Interface
+ *
+ * Based on Extensible Firmware Interface Specification version 2.4
+ *
+ * Copyright (C) 2013 - 2015 Linaro Ltd.
+ */
+
+#define pr_fmt(fmt)	"efi: " fmt
+
+#include <linux/efi.h>
+#include <linux/fwnode.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/mm_types.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+
+#include <asm/efi.h>
+
+static int __init is_memory(efi_memory_desc_t *md)
+{
+	if (md->attribute & (EFI_MEMORY_WB|EFI_MEMORY_WT|EFI_MEMORY_WC))
+		return 1;
+	return 0;
+}
+
+/*
+ * Translate a EFI virtual address into a physical address: this is necessary,
+ * as some data members of the EFI system table are virtually remapped after
+ * SetVirtualAddressMap() has been called.
+ */
+static phys_addr_t __init efi_to_phys(unsigned long addr)
+{
+	efi_memory_desc_t *md;
+
+	for_each_efi_memory_desc(md) {
+		if (!(md->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+		if (md->virt_addr == 0)
+			/* no virtual mapping has been installed by the stub */
+			break;
+		if (md->virt_addr <= addr &&
+		    (addr - md->virt_addr) < (md->num_pages << EFI_PAGE_SHIFT))
+			return md->phys_addr + addr - md->virt_addr;
+	}
+	return addr;
+}
+
+static __initdata unsigned long screen_info_table = EFI_INVALID_TABLE_ADDR;
+static __initdata unsigned long cpu_state_table = EFI_INVALID_TABLE_ADDR;
+
+static const efi_config_table_type_t arch_tables[] __initconst = {
+	{LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID, &screen_info_table},
+	{LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
+	{}
+};
+
+static void __init init_screen_info(void)
+{
+	struct screen_info *si;
+
+	if (IS_ENABLED(CONFIG_ARM) &&
+	    screen_info_table != EFI_INVALID_TABLE_ADDR) {
+		si = early_memremap_ro(screen_info_table, sizeof(*si));
+		if (!si) {
+			pr_err("Could not map screen_info config table\n");
+			return;
+		}
+		screen_info = *si;
+		early_memunmap(si, sizeof(*si));
+
+		/* dummycon on ARM needs non-zero values for columns/lines */
+		screen_info.orig_video_cols = 80;
+		screen_info.orig_video_lines = 25;
+	}
+
+	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI &&
+	    memblock_is_map_memory(screen_info.lfb_base))
+		memblock_mark_nomap(screen_info.lfb_base, screen_info.lfb_size);
+}
+
+static int __init uefi_init(u64 efi_system_table)
+{
+	efi_config_table_t *config_tables;
+	efi_system_table_t *systab;
+	size_t table_size;
+	int retval;
+
+	systab = early_memremap_ro(efi_system_table, sizeof(efi_system_table_t));
+	if (systab == NULL) {
+		pr_warn("Unable to map EFI system table.\n");
+		return -ENOMEM;
+	}
+
+	set_bit(EFI_BOOT, &efi.flags);
+	if (IS_ENABLED(CONFIG_64BIT))
+		set_bit(EFI_64BIT, &efi.flags);
+
+	retval = efi_systab_check_header(&systab->hdr, 2);
+	if (retval)
+		goto out;
+
+	efi.runtime = systab->runtime;
+	efi.runtime_version = systab->hdr.revision;
+
+	efi_systab_report_header(&systab->hdr, efi_to_phys(systab->fw_vendor));
+
+	table_size = sizeof(efi_config_table_t) * systab->nr_tables;
+	config_tables = early_memremap_ro(efi_to_phys(systab->tables),
+					  table_size);
+	if (config_tables == NULL) {
+		pr_warn("Unable to map EFI config table array.\n");
+		retval = -ENOMEM;
+		goto out;
+	}
+	retval = efi_config_parse_tables(config_tables, systab->nr_tables,
+					 IS_ENABLED(CONFIG_ARM) ? arch_tables
+								: NULL);
+
+	early_memunmap(config_tables, table_size);
+out:
+	early_memunmap(systab, sizeof(efi_system_table_t));
+	return retval;
+}
+
+/*
+ * Return true for regions that can be used as System RAM.
+ */
+static __init int is_usable_memory(efi_memory_desc_t *md)
+{
+	switch (md->type) {
+	case EFI_LOADER_CODE:
+	case EFI_LOADER_DATA:
+	case EFI_ACPI_RECLAIM_MEMORY:
+	case EFI_BOOT_SERVICES_CODE:
+	case EFI_BOOT_SERVICES_DATA:
+	case EFI_CONVENTIONAL_MEMORY:
+	case EFI_PERSISTENT_MEMORY:
+		/*
+		 * Special purpose memory is 'soft reserved', which means it
+		 * is set aside initially, but can be hotplugged back in or
+		 * be assigned to the dax driver after boot.
+		 */
+		if (efi_soft_reserve_enabled() &&
+		    (md->attribute & EFI_MEMORY_SP))
+			return false;
+
+		/*
+		 * According to the spec, these regions are no longer reserved
+		 * after calling ExitBootServices(). However, we can only use
+		 * them as System RAM if they can be mapped writeback cacheable.
+		 */
+		return (md->attribute & EFI_MEMORY_WB);
+	default:
+		break;
+	}
+	return false;
+}
+
+static __init void reserve_regions(void)
+{
+	efi_memory_desc_t *md;
+	u64 paddr, npages, size;
+
+	if (efi_enabled(EFI_DBG))
+		pr_info("Processing EFI memory map:\n");
+
+	/*
+	 * Discard memblocks discovered so far: if there are any at this
+	 * point, they originate from memory nodes in the DT, and UEFI
+	 * uses its own memory map instead.
+	 */
+	memblock_dump_all();
+	memblock_remove(0, PHYS_ADDR_MAX);
+
+	for_each_efi_memory_desc(md) {
+		paddr = md->phys_addr;
+		npages = md->num_pages;
+
+		if (efi_enabled(EFI_DBG)) {
+			char buf[64];
+
+			pr_info("  0x%012llx-0x%012llx %s\n",
+				paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
+				efi_md_typeattr_format(buf, sizeof(buf), md));
+		}
+
+		memrange_efi_to_native(&paddr, &npages);
+		size = npages << PAGE_SHIFT;
+
+		if (is_memory(md)) {
+			early_init_dt_add_memory_arch(paddr, size);
+
+			if (!is_usable_memory(md))
+				memblock_mark_nomap(paddr, size);
+
+			/* keep ACPI reclaim memory intact for kexec etc. */
+			if (md->type == EFI_ACPI_RECLAIM_MEMORY)
+				memblock_reserve(paddr, size);
+		}
+	}
+}
+
+void __init efi_init(void)
+{
+	struct efi_memory_map_data data;
+	u64 efi_system_table;
+
+	/* Grab UEFI information placed in FDT by stub */
+	efi_system_table = efi_get_fdt_params(&data);
+	if (!efi_system_table)
+		return;
+
+	if (efi_memmap_init_early(&data) < 0) {
+		/*
+		* If we are booting via UEFI, the UEFI memory map is the only
+		* description of memory we have, so there is little point in
+		* proceeding if we cannot access it.
+		*/
+		panic("Unable to map EFI memory map.\n");
+	}
+
+	WARN(efi.memmap.desc_version != 1,
+	     "Unexpected EFI_MEMORY_DESCRIPTOR version %ld",
+	      efi.memmap.desc_version);
+
+	if (uefi_init(efi_system_table) < 0) {
+		efi_memmap_unmap();
+		return;
+	}
+
+	reserve_regions();
+	efi_esrt_init();
+	efi_mokvar_table_init();
+
+	memblock_reserve(data.phys_map & PAGE_MASK,
+			 PAGE_ALIGN(data.size + (data.phys_map & ~PAGE_MASK)));
+
+	init_screen_info();
+
+#ifdef CONFIG_ARM
+	/* ARM does not permit early mappings to persist across paging_init() */
+	efi_memmap_unmap();
+
+	if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
+		struct efi_arm_entry_state *state;
+		bool dump_state = true;
+
+		state = early_memremap_ro(cpu_state_table,
+					  sizeof(struct efi_arm_entry_state));
+		if (state == NULL) {
+			pr_warn("Unable to map CPU entry state table.\n");
+			return;
+		}
+
+		if ((state->sctlr_before_ebs & 1) == 0)
+			pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
+		else if ((state->sctlr_after_ebs & 1) == 0)
+			pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
+		else
+			dump_state = false;
+
+		if (dump_state || efi_enabled(EFI_DBG)) {
+			pr_info("CPSR at EFI stub entry        : 0x%08x\n", state->cpsr_before_ebs);
+			pr_info("SCTLR at EFI stub entry       : 0x%08x\n", state->sctlr_before_ebs);
+			pr_info("CPSR after ExitBootServices() : 0x%08x\n", state->cpsr_after_ebs);
+			pr_info("SCTLR after ExitBootServices(): 0x%08x\n", state->sctlr_after_ebs);
+		}
+		early_memunmap(state, sizeof(struct efi_arm_entry_state));
+	}
+#endif
+}
+
+static bool efifb_overlaps_pci_range(const struct of_pci_range *range)
+{
+	u64 fb_base = screen_info.lfb_base;
+
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		fb_base |= (u64)(unsigned long)screen_info.ext_lfb_base << 32;
+
+	return fb_base >= range->cpu_addr &&
+	       fb_base < (range->cpu_addr + range->size);
+}
+
+static struct device_node *find_pci_overlap_node(void)
+{
+	struct device_node *np;
+
+	for_each_node_by_type(np, "pci") {
+		struct of_pci_range_parser parser;
+		struct of_pci_range range;
+		int err;
+
+		err = of_pci_range_parser_init(&parser, np);
+		if (err) {
+			pr_warn("of_pci_range_parser_init() failed: %d\n", err);
+			continue;
+		}
+
+		for_each_of_pci_range(&parser, &range)
+			if (efifb_overlaps_pci_range(&range))
+				return np;
+	}
+	return NULL;
+}
+
+/*
+ * If the efifb framebuffer is backed by a PCI graphics controller, we have
+ * to ensure that this relation is expressed using a device link when
+ * running in DT mode, or the probe order may be reversed, resulting in a
+ * resource reservation conflict on the memory window that the efifb
+ * framebuffer steals from the PCIe host bridge.
+ */
+static int efifb_add_links(const struct fwnode_handle *fwnode,
+			   struct device *dev)
+{
+	struct device_node *sup_np;
+	struct device *sup_dev;
+
+	sup_np = find_pci_overlap_node();
+
+	/*
+	 * If there's no PCI graphics controller backing the efifb, we are
+	 * done here.
+	 */
+	if (!sup_np)
+		return 0;
+
+	sup_dev = get_dev_from_fwnode(&sup_np->fwnode);
+	of_node_put(sup_np);
+
+	/*
+	 * Return -ENODEV if the PCI graphics controller device hasn't been
+	 * registered yet.  This ensures that efifb isn't allowed to probe
+	 * and this function is retried again when new devices are
+	 * registered.
+	 */
+	if (!sup_dev)
+		return -ENODEV;
+
+	/*
+	 * If this fails, retrying this function at a later point won't
+	 * change anything. So, don't return an error after this.
+	 */
+	if (!device_link_add(dev, sup_dev, fw_devlink_get_flags()))
+		dev_warn(dev, "device_link_add() failed\n");
+
+	put_device(sup_dev);
+
+	return 0;
+}
+
+static const struct fwnode_operations efifb_fwnode_ops = {
+	.add_links = efifb_add_links,
+};
+
+static struct fwnode_handle efifb_fwnode = {
+	.ops = &efifb_fwnode_ops,
+};
+
+static int __init register_gop_device(void)
+{
+	struct platform_device *pd;
+	int err;
+
+	if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI)
+		return 0;
+
+	pd = platform_device_alloc("efi-framebuffer", 0);
+	if (!pd)
+		return -ENOMEM;
+
+	if (IS_ENABLED(CONFIG_PCI))
+		pd->dev.fwnode = &efifb_fwnode;
+
+	err = platform_device_add_data(pd, &screen_info, sizeof(screen_info));
+	if (err)
+		return err;
+
+	return platform_device_add(pd);
+}
+subsys_initcall(register_gop_device);
diff --git a/drivers/firmware/efi/efi-pstore.c b/drivers/firmware/efi/efi-pstore.c
new file mode 100644
index 000000000..7e771c56c
--- /dev/null
+++ b/drivers/firmware/efi/efi-pstore.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/pstore.h>
+#include <linux/slab.h>
+#include <linux/ucs2_string.h>
+
+#define DUMP_NAME_LEN 66
+
+#define EFIVARS_DATA_SIZE_MAX 1024
+
+static bool efivars_pstore_disable =
+	IS_ENABLED(CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE);
+
+module_param_named(pstore_disable, efivars_pstore_disable, bool, 0644);
+
+#define PSTORE_EFI_ATTRIBUTES \
+	(EFI_VARIABLE_NON_VOLATILE | \
+	 EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+	 EFI_VARIABLE_RUNTIME_ACCESS)
+
+static LIST_HEAD(efi_pstore_list);
+static DECLARE_WORK(efivar_work, NULL);
+
+static int efi_pstore_open(struct pstore_info *psi)
+{
+	psi->data = NULL;
+	return 0;
+}
+
+static int efi_pstore_close(struct pstore_info *psi)
+{
+	psi->data = NULL;
+	return 0;
+}
+
+static inline u64 generic_id(u64 timestamp, unsigned int part, int count)
+{
+	return (timestamp * 100 + part) * 1000 + count;
+}
+
+static int efi_pstore_read_func(struct efivar_entry *entry,
+				struct pstore_record *record)
+{
+	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
+	char name[DUMP_NAME_LEN], data_type;
+	int i;
+	int cnt;
+	unsigned int part;
+	unsigned long size;
+	u64 time;
+
+	if (efi_guidcmp(entry->var.VendorGuid, vendor))
+		return 0;
+
+	for (i = 0; i < DUMP_NAME_LEN; i++)
+		name[i] = entry->var.VariableName[i];
+
+	if (sscanf(name, "dump-type%u-%u-%d-%llu-%c",
+		   &record->type, &part, &cnt, &time, &data_type) == 5) {
+		record->id = generic_id(time, part, cnt);
+		record->part = part;
+		record->count = cnt;
+		record->time.tv_sec = time;
+		record->time.tv_nsec = 0;
+		if (data_type == 'C')
+			record->compressed = true;
+		else
+			record->compressed = false;
+		record->ecc_notice_size = 0;
+	} else if (sscanf(name, "dump-type%u-%u-%d-%llu",
+		   &record->type, &part, &cnt, &time) == 4) {
+		record->id = generic_id(time, part, cnt);
+		record->part = part;
+		record->count = cnt;
+		record->time.tv_sec = time;
+		record->time.tv_nsec = 0;
+		record->compressed = false;
+		record->ecc_notice_size = 0;
+	} else if (sscanf(name, "dump-type%u-%u-%llu",
+			  &record->type, &part, &time) == 3) {
+		/*
+		 * Check if an old format,
+		 * which doesn't support holding
+		 * multiple logs, remains.
+		 */
+		record->id = generic_id(time, part, 0);
+		record->part = part;
+		record->count = 0;
+		record->time.tv_sec = time;
+		record->time.tv_nsec = 0;
+		record->compressed = false;
+		record->ecc_notice_size = 0;
+	} else
+		return 0;
+
+	entry->var.DataSize = 1024;
+	__efivar_entry_get(entry, &entry->var.Attributes,
+			   &entry->var.DataSize, entry->var.Data);
+	size = entry->var.DataSize;
+	memcpy(record->buf, entry->var.Data,
+	       (size_t)min_t(unsigned long, EFIVARS_DATA_SIZE_MAX, size));
+
+	return size;
+}
+
+/**
+ * efi_pstore_scan_sysfs_enter
+ * @pos: scanning entry
+ * @next: next entry
+ * @head: list head
+ */
+static void efi_pstore_scan_sysfs_enter(struct efivar_entry *pos,
+					struct efivar_entry *next,
+					struct list_head *head)
+{
+	pos->scanning = true;
+	if (&next->list != head)
+		next->scanning = true;
+}
+
+/**
+ * __efi_pstore_scan_sysfs_exit
+ * @entry: deleting entry
+ * @turn_off_scanning: Check if a scanning flag should be turned off
+ */
+static inline int __efi_pstore_scan_sysfs_exit(struct efivar_entry *entry,
+						bool turn_off_scanning)
+{
+	if (entry->deleting) {
+		list_del(&entry->list);
+		efivar_entry_iter_end();
+		kfree(entry);
+		if (efivar_entry_iter_begin())
+			return -EINTR;
+	} else if (turn_off_scanning)
+		entry->scanning = false;
+
+	return 0;
+}
+
+/**
+ * efi_pstore_scan_sysfs_exit
+ * @pos: scanning entry
+ * @next: next entry
+ * @head: list head
+ * @stop: a flag checking if scanning will stop
+ */
+static int efi_pstore_scan_sysfs_exit(struct efivar_entry *pos,
+				       struct efivar_entry *next,
+				       struct list_head *head, bool stop)
+{
+	int ret = __efi_pstore_scan_sysfs_exit(pos, true);
+
+	if (ret)
+		return ret;
+
+	if (stop)
+		ret = __efi_pstore_scan_sysfs_exit(next, &next->list != head);
+	return ret;
+}
+
+/**
+ * efi_pstore_sysfs_entry_iter
+ *
+ * @record: pstore record to pass to callback
+ *
+ * You MUST call efivar_entry_iter_begin() before this function, and
+ * efivar_entry_iter_end() afterwards.
+ *
+ */
+static int efi_pstore_sysfs_entry_iter(struct pstore_record *record)
+{
+	struct efivar_entry **pos = (struct efivar_entry **)&record->psi->data;
+	struct efivar_entry *entry, *n;
+	struct list_head *head = &efi_pstore_list;
+	int size = 0;
+	int ret;
+
+	if (!*pos) {
+		list_for_each_entry_safe(entry, n, head, list) {
+			efi_pstore_scan_sysfs_enter(entry, n, head);
+
+			size = efi_pstore_read_func(entry, record);
+			ret = efi_pstore_scan_sysfs_exit(entry, n, head,
+							 size < 0);
+			if (ret)
+				return ret;
+			if (size)
+				break;
+		}
+		*pos = n;
+		return size;
+	}
+
+	list_for_each_entry_safe_from((*pos), n, head, list) {
+		efi_pstore_scan_sysfs_enter((*pos), n, head);
+
+		size = efi_pstore_read_func((*pos), record);
+		ret = efi_pstore_scan_sysfs_exit((*pos), n, head, size < 0);
+		if (ret)
+			return ret;
+		if (size)
+			break;
+	}
+	*pos = n;
+	return size;
+}
+
+/**
+ * efi_pstore_read
+ *
+ * This function returns a size of NVRAM entry logged via efi_pstore_write().
+ * The meaning and behavior of efi_pstore/pstore are as below.
+ *
+ * size > 0: Got data of an entry logged via efi_pstore_write() successfully,
+ *           and pstore filesystem will continue reading subsequent entries.
+ * size == 0: Entry was not logged via efi_pstore_write(),
+ *            and efi_pstore driver will continue reading subsequent entries.
+ * size < 0: Failed to get data of entry logging via efi_pstore_write(),
+ *           and pstore will stop reading entry.
+ */
+static ssize_t efi_pstore_read(struct pstore_record *record)
+{
+	ssize_t size;
+
+	record->buf = kzalloc(EFIVARS_DATA_SIZE_MAX, GFP_KERNEL);
+	if (!record->buf)
+		return -ENOMEM;
+
+	if (efivar_entry_iter_begin()) {
+		size = -EINTR;
+		goto out;
+	}
+	size = efi_pstore_sysfs_entry_iter(record);
+	efivar_entry_iter_end();
+
+out:
+	if (size <= 0) {
+		kfree(record->buf);
+		record->buf = NULL;
+	}
+	return size;
+}
+
+static int efi_pstore_write(struct pstore_record *record)
+{
+	char name[DUMP_NAME_LEN];
+	efi_char16_t efi_name[DUMP_NAME_LEN];
+	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
+	int i, ret = 0;
+
+	record->id = generic_id(record->time.tv_sec, record->part,
+				record->count);
+
+	/* Since we copy the entire length of name, make sure it is wiped. */
+	memset(name, 0, sizeof(name));
+
+	snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lld-%c",
+		 record->type, record->part, record->count,
+		 (long long)record->time.tv_sec,
+		 record->compressed ? 'C' : 'D');
+
+	for (i = 0; i < DUMP_NAME_LEN; i++)
+		efi_name[i] = name[i];
+
+	ret = efivar_entry_set_safe(efi_name, vendor, PSTORE_EFI_ATTRIBUTES,
+			      false, record->size, record->psi->buf);
+
+	if (record->reason == KMSG_DUMP_OOPS && try_module_get(THIS_MODULE))
+		if (!schedule_work(&efivar_work))
+			module_put(THIS_MODULE);
+
+	return ret;
+};
+
+/*
+ * Clean up an entry with the same name
+ */
+static int efi_pstore_erase_func(struct efivar_entry *entry, void *data)
+{
+	efi_char16_t *efi_name = data;
+	efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
+	unsigned long ucs2_len = ucs2_strlen(efi_name);
+
+	if (efi_guidcmp(entry->var.VendorGuid, vendor))
+		return 0;
+
+	if (ucs2_strncmp(entry->var.VariableName, efi_name, (size_t)ucs2_len))
+		return 0;
+
+	if (entry->scanning) {
+		/*
+		 * Skip deletion because this entry will be deleted
+		 * after scanning is completed.
+		 */
+		entry->deleting = true;
+	} else
+		list_del(&entry->list);
+
+	/* found */
+	__efivar_entry_delete(entry);
+
+	return 1;
+}
+
+static int efi_pstore_erase_name(const char *name)
+{
+	struct efivar_entry *entry = NULL;
+	efi_char16_t efi_name[DUMP_NAME_LEN];
+	int found, i;
+
+	for (i = 0; i < DUMP_NAME_LEN; i++) {
+		efi_name[i] = name[i];
+		if (name[i] == '\0')
+			break;
+	}
+
+	if (efivar_entry_iter_begin())
+		return -EINTR;
+
+	found = __efivar_entry_iter(efi_pstore_erase_func, &efi_pstore_list,
+				    efi_name, &entry);
+	efivar_entry_iter_end();
+
+	if (found && !entry->scanning)
+		kfree(entry);
+
+	return found ? 0 : -ENOENT;
+}
+
+static int efi_pstore_erase(struct pstore_record *record)
+{
+	char name[DUMP_NAME_LEN];
+	int ret;
+
+	snprintf(name, sizeof(name), "dump-type%u-%u-%d-%lld",
+		 record->type, record->part, record->count,
+		 (long long)record->time.tv_sec);
+	ret = efi_pstore_erase_name(name);
+	if (ret != -ENOENT)
+		return ret;
+
+	snprintf(name, sizeof(name), "dump-type%u-%u-%lld",
+		record->type, record->part, (long long)record->time.tv_sec);
+	ret = efi_pstore_erase_name(name);
+
+	return ret;
+}
+
+static struct pstore_info efi_pstore_info = {
+	.owner		= THIS_MODULE,
+	.name		= "efi",
+	.flags		= PSTORE_FLAGS_DMESG,
+	.open		= efi_pstore_open,
+	.close		= efi_pstore_close,
+	.read		= efi_pstore_read,
+	.write		= efi_pstore_write,
+	.erase		= efi_pstore_erase,
+};
+
+static int efi_pstore_callback(efi_char16_t *name, efi_guid_t vendor,
+			       unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry;
+	int ret;
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	entry->var.VendorGuid = vendor;
+
+	ret = efivar_entry_add(entry, &efi_pstore_list);
+	if (ret)
+		kfree(entry);
+
+	return ret;
+}
+
+static int efi_pstore_update_entry(efi_char16_t *name, efi_guid_t vendor,
+				   unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry = data;
+
+	if (efivar_entry_find(name, vendor, &efi_pstore_list, false))
+		return 0;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	memcpy(&(entry->var.VendorGuid), &vendor, sizeof(efi_guid_t));
+
+	return 1;
+}
+
+static void efi_pstore_update_entries(struct work_struct *work)
+{
+	struct efivar_entry *entry;
+	int err;
+
+	/* Add new sysfs entries */
+	while (1) {
+		entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+		if (!entry)
+			return;
+
+		err = efivar_init(efi_pstore_update_entry, entry,
+				  false, &efi_pstore_list);
+		if (!err)
+			break;
+
+		efivar_entry_add(entry, &efi_pstore_list);
+	}
+
+	kfree(entry);
+	module_put(THIS_MODULE);
+}
+
+static __init int efivars_pstore_init(void)
+{
+	int ret;
+
+	if (!efivars_kobject() || !efivar_supports_writes())
+		return 0;
+
+	if (efivars_pstore_disable)
+		return 0;
+
+	ret = efivar_init(efi_pstore_callback, NULL, true, &efi_pstore_list);
+	if (ret)
+		return ret;
+
+	efi_pstore_info.buf = kmalloc(4096, GFP_KERNEL);
+	if (!efi_pstore_info.buf)
+		return -ENOMEM;
+
+	efi_pstore_info.bufsize = 1024;
+
+	if (pstore_register(&efi_pstore_info)) {
+		kfree(efi_pstore_info.buf);
+		efi_pstore_info.buf = NULL;
+		efi_pstore_info.bufsize = 0;
+	}
+
+	INIT_WORK(&efivar_work, efi_pstore_update_entries);
+
+	return 0;
+}
+
+static __exit void efivars_pstore_exit(void)
+{
+	if (!efi_pstore_info.bufsize)
+		return;
+
+	pstore_unregister(&efi_pstore_info);
+	kfree(efi_pstore_info.buf);
+	efi_pstore_info.buf = NULL;
+	efi_pstore_info.bufsize = 0;
+}
+
+module_init(efivars_pstore_init);
+module_exit(efivars_pstore_exit);
+
+MODULE_DESCRIPTION("EFI variable backend for pstore");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:efivars");
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
new file mode 100644
index 000000000..332739f3e
--- /dev/null
+++ b/drivers/firmware/efi/efi.c
@@ -0,0 +1,1049 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * efi.c - EFI subsystem
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ * Copyright (C) 2013 Tom Gundersen <teg@jklm.no>
+ *
+ * This code registers /sys/firmware/efi{,/efivars} when EFI is supported,
+ * allowing the efivarfs to be mounted or the efivars module to be loaded.
+ * The existance of /sys/firmware/efi may also be used by userspace to
+ * determine that the system supports EFI.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/kexec.h>
+#include <linux/platform_device.h>
+#include <linux/random.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/ucs2_string.h>
+#include <linux/memblock.h>
+#include <linux/security.h>
+
+#include <asm/early_ioremap.h>
+
+struct efi __read_mostly efi = {
+	.runtime_supported_mask = EFI_RT_SUPPORTED_ALL,
+	.acpi			= EFI_INVALID_TABLE_ADDR,
+	.acpi20			= EFI_INVALID_TABLE_ADDR,
+	.smbios			= EFI_INVALID_TABLE_ADDR,
+	.smbios3		= EFI_INVALID_TABLE_ADDR,
+	.esrt			= EFI_INVALID_TABLE_ADDR,
+	.tpm_log		= EFI_INVALID_TABLE_ADDR,
+	.tpm_final_log		= EFI_INVALID_TABLE_ADDR,
+#ifdef CONFIG_LOAD_UEFI_KEYS
+	.mokvar_table		= EFI_INVALID_TABLE_ADDR,
+#endif
+};
+EXPORT_SYMBOL(efi);
+
+unsigned long __ro_after_init efi_rng_seed = EFI_INVALID_TABLE_ADDR;
+static unsigned long __initdata mem_reserve = EFI_INVALID_TABLE_ADDR;
+static unsigned long __initdata rt_prop = EFI_INVALID_TABLE_ADDR;
+
+struct mm_struct efi_mm = {
+	.mm_rb			= RB_ROOT,
+	.mm_users		= ATOMIC_INIT(2),
+	.mm_count		= ATOMIC_INIT(1),
+	.write_protect_seq      = SEQCNT_ZERO(efi_mm.write_protect_seq),
+	MMAP_LOCK_INITIALIZER(efi_mm)
+	.page_table_lock	= __SPIN_LOCK_UNLOCKED(efi_mm.page_table_lock),
+	.mmlist			= LIST_HEAD_INIT(efi_mm.mmlist),
+	.cpu_bitmap		= { [BITS_TO_LONGS(NR_CPUS)] = 0},
+};
+
+struct workqueue_struct *efi_rts_wq;
+
+static bool disable_runtime;
+static int __init setup_noefi(char *arg)
+{
+	disable_runtime = true;
+	return 0;
+}
+early_param("noefi", setup_noefi);
+
+bool efi_runtime_disabled(void)
+{
+	return disable_runtime;
+}
+
+bool __pure __efi_soft_reserve_enabled(void)
+{
+	return !efi_enabled(EFI_MEM_NO_SOFT_RESERVE);
+}
+
+static int __init parse_efi_cmdline(char *str)
+{
+	if (!str) {
+		pr_warn("need at least one option\n");
+		return -EINVAL;
+	}
+
+	if (parse_option_str(str, "debug"))
+		set_bit(EFI_DBG, &efi.flags);
+
+	if (parse_option_str(str, "noruntime"))
+		disable_runtime = true;
+
+	if (parse_option_str(str, "nosoftreserve"))
+		set_bit(EFI_MEM_NO_SOFT_RESERVE, &efi.flags);
+
+	return 0;
+}
+early_param("efi", parse_efi_cmdline);
+
+struct kobject *efi_kobj;
+
+/*
+ * Let's not leave out systab information that snuck into
+ * the efivars driver
+ * Note, do not add more fields in systab sysfs file as it breaks sysfs
+ * one value per file rule!
+ */
+static ssize_t systab_show(struct kobject *kobj,
+			   struct kobj_attribute *attr, char *buf)
+{
+	char *str = buf;
+
+	if (!kobj || !buf)
+		return -EINVAL;
+
+	if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI20=0x%lx\n", efi.acpi20);
+	if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
+	/*
+	 * If both SMBIOS and SMBIOS3 entry points are implemented, the
+	 * SMBIOS3 entry point shall be preferred, so we list it first to
+	 * let applications stop parsing after the first match.
+	 */
+	if (efi.smbios3 != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "SMBIOS3=0x%lx\n", efi.smbios3);
+	if (efi.smbios != EFI_INVALID_TABLE_ADDR)
+		str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+
+	if (IS_ENABLED(CONFIG_IA64) || IS_ENABLED(CONFIG_X86))
+		str = efi_systab_show_arch(str);
+
+	return str - buf;
+}
+
+static struct kobj_attribute efi_attr_systab = __ATTR_RO_MODE(systab, 0400);
+
+static ssize_t fw_platform_size_show(struct kobject *kobj,
+				     struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", efi_enabled(EFI_64BIT) ? 64 : 32);
+}
+
+extern __weak struct kobj_attribute efi_attr_fw_vendor;
+extern __weak struct kobj_attribute efi_attr_runtime;
+extern __weak struct kobj_attribute efi_attr_config_table;
+static struct kobj_attribute efi_attr_fw_platform_size =
+	__ATTR_RO(fw_platform_size);
+
+static struct attribute *efi_subsys_attrs[] = {
+	&efi_attr_systab.attr,
+	&efi_attr_fw_platform_size.attr,
+	&efi_attr_fw_vendor.attr,
+	&efi_attr_runtime.attr,
+	&efi_attr_config_table.attr,
+	NULL,
+};
+
+umode_t __weak efi_attr_is_visible(struct kobject *kobj, struct attribute *attr,
+				   int n)
+{
+	return attr->mode;
+}
+
+static const struct attribute_group efi_subsys_attr_group = {
+	.attrs = efi_subsys_attrs,
+	.is_visible = efi_attr_is_visible,
+};
+
+static struct efivars generic_efivars;
+static struct efivar_operations generic_ops;
+
+static int generic_ops_register(void)
+{
+	generic_ops.get_variable = efi.get_variable;
+	generic_ops.get_next_variable = efi.get_next_variable;
+	generic_ops.query_variable_store = efi_query_variable_store;
+
+	if (efi_rt_services_supported(EFI_RT_SUPPORTED_SET_VARIABLE)) {
+		generic_ops.set_variable = efi.set_variable;
+		generic_ops.set_variable_nonblocking = efi.set_variable_nonblocking;
+	}
+	return efivars_register(&generic_efivars, &generic_ops, efi_kobj);
+}
+
+static void generic_ops_unregister(void)
+{
+	efivars_unregister(&generic_efivars);
+}
+
+#ifdef CONFIG_EFI_CUSTOM_SSDT_OVERLAYS
+#define EFIVAR_SSDT_NAME_MAX	16
+static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata;
+static int __init efivar_ssdt_setup(char *str)
+{
+	int ret = security_locked_down(LOCKDOWN_ACPI_TABLES);
+
+	if (ret)
+		return ret;
+
+	if (strlen(str) < sizeof(efivar_ssdt))
+		memcpy(efivar_ssdt, str, strlen(str));
+	else
+		pr_warn("efivar_ssdt: name too long: %s\n", str);
+	return 1;
+}
+__setup("efivar_ssdt=", efivar_ssdt_setup);
+
+static __init int efivar_ssdt_iter(efi_char16_t *name, efi_guid_t vendor,
+				   unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry;
+	struct list_head *list = data;
+	char utf8_name[EFIVAR_SSDT_NAME_MAX];
+	int limit = min_t(unsigned long, EFIVAR_SSDT_NAME_MAX, name_size);
+
+	ucs2_as_utf8(utf8_name, name, limit - 1);
+	if (strncmp(utf8_name, efivar_ssdt, limit) != 0)
+		return 0;
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return 0;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	memcpy(&entry->var.VendorGuid, &vendor, sizeof(efi_guid_t));
+
+	efivar_entry_add(entry, list);
+
+	return 0;
+}
+
+static __init int efivar_ssdt_load(void)
+{
+	LIST_HEAD(entries);
+	struct efivar_entry *entry, *aux;
+	unsigned long size;
+	void *data;
+	int ret;
+
+	if (!efivar_ssdt[0])
+		return 0;
+
+	ret = efivar_init(efivar_ssdt_iter, &entries, true, &entries);
+
+	list_for_each_entry_safe(entry, aux, &entries, list) {
+		pr_info("loading SSDT from variable %s-%pUl\n", efivar_ssdt,
+			&entry->var.VendorGuid);
+
+		list_del(&entry->list);
+
+		ret = efivar_entry_size(entry, &size);
+		if (ret) {
+			pr_err("failed to get var size\n");
+			goto free_entry;
+		}
+
+		data = kmalloc(size, GFP_KERNEL);
+		if (!data) {
+			ret = -ENOMEM;
+			goto free_entry;
+		}
+
+		ret = efivar_entry_get(entry, NULL, &size, data);
+		if (ret) {
+			pr_err("failed to get var data\n");
+			goto free_data;
+		}
+
+		ret = acpi_load_table(data, NULL);
+		if (ret) {
+			pr_err("failed to load table: %d\n", ret);
+			goto free_data;
+		}
+
+		goto free_entry;
+
+free_data:
+		kfree(data);
+
+free_entry:
+		kfree(entry);
+	}
+
+	return ret;
+}
+#else
+static inline int efivar_ssdt_load(void) { return 0; }
+#endif
+
+#ifdef CONFIG_DEBUG_FS
+
+#define EFI_DEBUGFS_MAX_BLOBS 32
+
+static struct debugfs_blob_wrapper debugfs_blob[EFI_DEBUGFS_MAX_BLOBS];
+
+static void __init efi_debugfs_init(void)
+{
+	struct dentry *efi_debugfs;
+	efi_memory_desc_t *md;
+	char name[32];
+	int type_count[EFI_BOOT_SERVICES_DATA + 1] = {};
+	int i = 0;
+
+	efi_debugfs = debugfs_create_dir("efi", NULL);
+	if (IS_ERR_OR_NULL(efi_debugfs))
+		return;
+
+	for_each_efi_memory_desc(md) {
+		switch (md->type) {
+		case EFI_BOOT_SERVICES_CODE:
+			snprintf(name, sizeof(name), "boot_services_code%d",
+				 type_count[md->type]++);
+			break;
+		case EFI_BOOT_SERVICES_DATA:
+			snprintf(name, sizeof(name), "boot_services_data%d",
+				 type_count[md->type]++);
+			break;
+		default:
+			continue;
+		}
+
+		if (i >= EFI_DEBUGFS_MAX_BLOBS) {
+			pr_warn("More then %d EFI boot service segments, only showing first %d in debugfs\n",
+				EFI_DEBUGFS_MAX_BLOBS, EFI_DEBUGFS_MAX_BLOBS);
+			break;
+		}
+
+		debugfs_blob[i].size = md->num_pages << EFI_PAGE_SHIFT;
+		debugfs_blob[i].data = memremap(md->phys_addr,
+						debugfs_blob[i].size,
+						MEMREMAP_WB);
+		if (!debugfs_blob[i].data)
+			continue;
+
+		debugfs_create_blob(name, 0400, efi_debugfs, &debugfs_blob[i]);
+		i++;
+	}
+}
+#else
+static inline void efi_debugfs_init(void) {}
+#endif
+
+/*
+ * We register the efi subsystem with the firmware subsystem and the
+ * efivars subsystem with the efi subsystem, if the system was booted with
+ * EFI.
+ */
+static int __init efisubsys_init(void)
+{
+	int error;
+
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		efi.runtime_supported_mask = 0;
+
+	if (!efi_enabled(EFI_BOOT))
+		return 0;
+
+	if (efi.runtime_supported_mask) {
+		/*
+		 * Since we process only one efi_runtime_service() at a time, an
+		 * ordered workqueue (which creates only one execution context)
+		 * should suffice for all our needs.
+		 */
+		efi_rts_wq = alloc_ordered_workqueue("efi_rts_wq", 0);
+		if (!efi_rts_wq) {
+			pr_err("Creating efi_rts_wq failed, EFI runtime services disabled.\n");
+			clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+			efi.runtime_supported_mask = 0;
+			return 0;
+		}
+	}
+
+	if (efi_rt_services_supported(EFI_RT_SUPPORTED_TIME_SERVICES))
+		platform_device_register_simple("rtc-efi", 0, NULL, 0);
+
+	/* We register the efi directory at /sys/firmware/efi */
+	efi_kobj = kobject_create_and_add("efi", firmware_kobj);
+	if (!efi_kobj) {
+		pr_err("efi: Firmware registration failed.\n");
+		error = -ENOMEM;
+		goto err_destroy_wq;
+	}
+
+	if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE |
+				      EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME)) {
+		error = generic_ops_register();
+		if (error)
+			goto err_put;
+		efivar_ssdt_load();
+		platform_device_register_simple("efivars", 0, NULL, 0);
+	}
+
+	error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group);
+	if (error) {
+		pr_err("efi: Sysfs attribute export failed with error %d.\n",
+		       error);
+		goto err_unregister;
+	}
+
+	error = efi_runtime_map_init(efi_kobj);
+	if (error)
+		goto err_remove_group;
+
+	/* and the standard mountpoint for efivarfs */
+	error = sysfs_create_mount_point(efi_kobj, "efivars");
+	if (error) {
+		pr_err("efivars: Subsystem registration failed.\n");
+		goto err_remove_group;
+	}
+
+	if (efi_enabled(EFI_DBG) && efi_enabled(EFI_PRESERVE_BS_REGIONS))
+		efi_debugfs_init();
+
+	return 0;
+
+err_remove_group:
+	sysfs_remove_group(efi_kobj, &efi_subsys_attr_group);
+err_unregister:
+	if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE |
+				      EFI_RT_SUPPORTED_GET_NEXT_VARIABLE_NAME))
+		generic_ops_unregister();
+err_put:
+	kobject_put(efi_kobj);
+err_destroy_wq:
+	if (efi_rts_wq)
+		destroy_workqueue(efi_rts_wq);
+
+	return error;
+}
+
+subsys_initcall(efisubsys_init);
+
+/*
+ * Find the efi memory descriptor for a given physical address.  Given a
+ * physical address, determine if it exists within an EFI Memory Map entry,
+ * and if so, populate the supplied memory descriptor with the appropriate
+ * data.
+ */
+int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
+{
+	efi_memory_desc_t *md;
+
+	if (!efi_enabled(EFI_MEMMAP)) {
+		pr_err_once("EFI_MEMMAP is not enabled.\n");
+		return -EINVAL;
+	}
+
+	if (!out_md) {
+		pr_err_once("out_md is null.\n");
+		return -EINVAL;
+        }
+
+	for_each_efi_memory_desc(md) {
+		u64 size;
+		u64 end;
+
+		size = md->num_pages << EFI_PAGE_SHIFT;
+		end = md->phys_addr + size;
+		if (phys_addr >= md->phys_addr && phys_addr < end) {
+			memcpy(out_md, md, sizeof(*out_md));
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+/*
+ * Calculate the highest address of an efi memory descriptor.
+ */
+u64 __init efi_mem_desc_end(efi_memory_desc_t *md)
+{
+	u64 size = md->num_pages << EFI_PAGE_SHIFT;
+	u64 end = md->phys_addr + size;
+	return end;
+}
+
+void __init __weak efi_arch_mem_reserve(phys_addr_t addr, u64 size) {}
+
+/**
+ * efi_mem_reserve - Reserve an EFI memory region
+ * @addr: Physical address to reserve
+ * @size: Size of reservation
+ *
+ * Mark a region as reserved from general kernel allocation and
+ * prevent it being released by efi_free_boot_services().
+ *
+ * This function should be called drivers once they've parsed EFI
+ * configuration tables to figure out where their data lives, e.g.
+ * efi_esrt_init().
+ */
+void __init efi_mem_reserve(phys_addr_t addr, u64 size)
+{
+	if (!memblock_is_region_reserved(addr, size))
+		memblock_reserve(addr, size);
+
+	/*
+	 * Some architectures (x86) reserve all boot services ranges
+	 * until efi_free_boot_services() because of buggy firmware
+	 * implementations. This means the above memblock_reserve() is
+	 * superfluous on x86 and instead what it needs to do is
+	 * ensure the @start, @size is not freed.
+	 */
+	efi_arch_mem_reserve(addr, size);
+}
+
+static const efi_config_table_type_t common_tables[] __initconst = {
+	{ACPI_20_TABLE_GUID,			&efi.acpi20,		"ACPI 2.0"	},
+	{ACPI_TABLE_GUID,			&efi.acpi,		"ACPI"		},
+	{SMBIOS_TABLE_GUID,			&efi.smbios,		"SMBIOS"	},
+	{SMBIOS3_TABLE_GUID,			&efi.smbios3,		"SMBIOS 3.0"	},
+	{EFI_SYSTEM_RESOURCE_TABLE_GUID,	&efi.esrt,		"ESRT"		},
+	{EFI_MEMORY_ATTRIBUTES_TABLE_GUID,	&efi_mem_attr_table,	"MEMATTR"	},
+	{LINUX_EFI_RANDOM_SEED_TABLE_GUID,	&efi_rng_seed,		"RNG"		},
+	{LINUX_EFI_TPM_EVENT_LOG_GUID,		&efi.tpm_log,		"TPMEventLog"	},
+	{LINUX_EFI_TPM_FINAL_LOG_GUID,		&efi.tpm_final_log,	"TPMFinalLog"	},
+	{LINUX_EFI_MEMRESERVE_TABLE_GUID,	&mem_reserve,		"MEMRESERVE"	},
+	{EFI_RT_PROPERTIES_TABLE_GUID,		&rt_prop,		"RTPROP"	},
+#ifdef CONFIG_EFI_RCI2_TABLE
+	{DELLEMC_EFI_RCI2_TABLE_GUID,		&rci2_table_phys			},
+#endif
+#ifdef CONFIG_LOAD_UEFI_KEYS
+	{LINUX_EFI_MOK_VARIABLE_TABLE_GUID,	&efi.mokvar_table,	"MOKvar"	},
+#endif
+	{},
+};
+
+static __init int match_config_table(const efi_guid_t *guid,
+				     unsigned long table,
+				     const efi_config_table_type_t *table_types)
+{
+	int i;
+
+	for (i = 0; efi_guidcmp(table_types[i].guid, NULL_GUID); i++) {
+		if (!efi_guidcmp(*guid, table_types[i].guid)) {
+			*(table_types[i].ptr) = table;
+			if (table_types[i].name[0])
+				pr_cont("%s=0x%lx ",
+					table_types[i].name, table);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+int __init efi_config_parse_tables(const efi_config_table_t *config_tables,
+				   int count,
+				   const efi_config_table_type_t *arch_tables)
+{
+	const efi_config_table_64_t *tbl64 = (void *)config_tables;
+	const efi_config_table_32_t *tbl32 = (void *)config_tables;
+	const efi_guid_t *guid;
+	unsigned long table;
+	int i;
+
+	pr_info("");
+	for (i = 0; i < count; i++) {
+		if (!IS_ENABLED(CONFIG_X86)) {
+			guid = &config_tables[i].guid;
+			table = (unsigned long)config_tables[i].table;
+		} else if (efi_enabled(EFI_64BIT)) {
+			guid = &tbl64[i].guid;
+			table = tbl64[i].table;
+
+			if (IS_ENABLED(CONFIG_X86_32) &&
+			    tbl64[i].table > U32_MAX) {
+				pr_cont("\n");
+				pr_err("Table located above 4GB, disabling EFI.\n");
+				return -EINVAL;
+			}
+		} else {
+			guid = &tbl32[i].guid;
+			table = tbl32[i].table;
+		}
+
+		if (!match_config_table(guid, table, common_tables) && arch_tables)
+			match_config_table(guid, table, arch_tables);
+	}
+	pr_cont("\n");
+	set_bit(EFI_CONFIG_TABLES, &efi.flags);
+
+	if (efi_rng_seed != EFI_INVALID_TABLE_ADDR) {
+		struct linux_efi_random_seed *seed;
+		u32 size = 0;
+
+		seed = early_memremap(efi_rng_seed, sizeof(*seed));
+		if (seed != NULL) {
+			size = min_t(u32, seed->size, SZ_1K); // sanity check
+			early_memunmap(seed, sizeof(*seed));
+		} else {
+			pr_err("Could not map UEFI random seed!\n");
+		}
+		if (size > 0) {
+			seed = early_memremap(efi_rng_seed,
+					      sizeof(*seed) + size);
+			if (seed != NULL) {
+				add_bootloader_randomness(seed->bits, size);
+				memzero_explicit(seed->bits, size);
+				early_memunmap(seed, sizeof(*seed) + size);
+			} else {
+				pr_err("Could not map UEFI random seed!\n");
+			}
+		}
+	}
+
+	if (!IS_ENABLED(CONFIG_X86_32) && efi_enabled(EFI_MEMMAP))
+		efi_memattr_init();
+
+	efi_tpm_eventlog_init();
+
+	if (mem_reserve != EFI_INVALID_TABLE_ADDR) {
+		unsigned long prsv = mem_reserve;
+
+		while (prsv) {
+			struct linux_efi_memreserve *rsv;
+			u8 *p;
+
+			/*
+			 * Just map a full page: that is what we will get
+			 * anyway, and it permits us to map the entire entry
+			 * before knowing its size.
+			 */
+			p = early_memremap(ALIGN_DOWN(prsv, PAGE_SIZE),
+					   PAGE_SIZE);
+			if (p == NULL) {
+				pr_err("Could not map UEFI memreserve entry!\n");
+				return -ENOMEM;
+			}
+
+			rsv = (void *)(p + prsv % PAGE_SIZE);
+
+			/* reserve the entry itself */
+			memblock_reserve(prsv,
+					 struct_size(rsv, entry, rsv->size));
+
+			for (i = 0; i < atomic_read(&rsv->count); i++) {
+				memblock_reserve(rsv->entry[i].base,
+						 rsv->entry[i].size);
+			}
+
+			prsv = rsv->next;
+			early_memunmap(p, PAGE_SIZE);
+		}
+	}
+
+	if (rt_prop != EFI_INVALID_TABLE_ADDR) {
+		efi_rt_properties_table_t *tbl;
+
+		tbl = early_memremap(rt_prop, sizeof(*tbl));
+		if (tbl) {
+			efi.runtime_supported_mask &= tbl->runtime_services_supported;
+			early_memunmap(tbl, sizeof(*tbl));
+		}
+	}
+
+	return 0;
+}
+
+int __init efi_systab_check_header(const efi_table_hdr_t *systab_hdr,
+				   int min_major_version)
+{
+	if (systab_hdr->signature != EFI_SYSTEM_TABLE_SIGNATURE) {
+		pr_err("System table signature incorrect!\n");
+		return -EINVAL;
+	}
+
+	if ((systab_hdr->revision >> 16) < min_major_version)
+		pr_err("Warning: System table version %d.%02d, expected %d.00 or greater!\n",
+		       systab_hdr->revision >> 16,
+		       systab_hdr->revision & 0xffff,
+		       min_major_version);
+
+	return 0;
+}
+
+#ifndef CONFIG_IA64
+static const efi_char16_t *__init map_fw_vendor(unsigned long fw_vendor,
+						size_t size)
+{
+	const efi_char16_t *ret;
+
+	ret = early_memremap_ro(fw_vendor, size);
+	if (!ret)
+		pr_err("Could not map the firmware vendor!\n");
+	return ret;
+}
+
+static void __init unmap_fw_vendor(const void *fw_vendor, size_t size)
+{
+	early_memunmap((void *)fw_vendor, size);
+}
+#else
+#define map_fw_vendor(p, s)	__va(p)
+#define unmap_fw_vendor(v, s)
+#endif
+
+void __init efi_systab_report_header(const efi_table_hdr_t *systab_hdr,
+				     unsigned long fw_vendor)
+{
+	char vendor[100] = "unknown";
+	const efi_char16_t *c16;
+	size_t i;
+
+	c16 = map_fw_vendor(fw_vendor, sizeof(vendor) * sizeof(efi_char16_t));
+	if (c16) {
+		for (i = 0; i < sizeof(vendor) - 1 && c16[i]; ++i)
+			vendor[i] = c16[i];
+		vendor[i] = '\0';
+
+		unmap_fw_vendor(c16, sizeof(vendor) * sizeof(efi_char16_t));
+	}
+
+	pr_info("EFI v%u.%.02u by %s\n",
+		systab_hdr->revision >> 16,
+		systab_hdr->revision & 0xffff,
+		vendor);
+
+	if (IS_ENABLED(CONFIG_X86_64) &&
+	    systab_hdr->revision > EFI_1_10_SYSTEM_TABLE_REVISION &&
+	    !strcmp(vendor, "Apple")) {
+		pr_info("Apple Mac detected, using EFI v1.10 runtime services only\n");
+		efi.runtime_version = EFI_1_10_SYSTEM_TABLE_REVISION;
+	}
+}
+
+static __initdata char memory_type_name[][13] = {
+	"Reserved",
+	"Loader Code",
+	"Loader Data",
+	"Boot Code",
+	"Boot Data",
+	"Runtime Code",
+	"Runtime Data",
+	"Conventional",
+	"Unusable",
+	"ACPI Reclaim",
+	"ACPI Mem NVS",
+	"MMIO",
+	"MMIO Port",
+	"PAL Code",
+	"Persistent",
+};
+
+char * __init efi_md_typeattr_format(char *buf, size_t size,
+				     const efi_memory_desc_t *md)
+{
+	char *pos;
+	int type_len;
+	u64 attr;
+
+	pos = buf;
+	if (md->type >= ARRAY_SIZE(memory_type_name))
+		type_len = snprintf(pos, size, "[type=%u", md->type);
+	else
+		type_len = snprintf(pos, size, "[%-*s",
+				    (int)(sizeof(memory_type_name[0]) - 1),
+				    memory_type_name[md->type]);
+	if (type_len >= size)
+		return buf;
+
+	pos += type_len;
+	size -= type_len;
+
+	attr = md->attribute;
+	if (attr & ~(EFI_MEMORY_UC | EFI_MEMORY_WC | EFI_MEMORY_WT |
+		     EFI_MEMORY_WB | EFI_MEMORY_UCE | EFI_MEMORY_RO |
+		     EFI_MEMORY_WP | EFI_MEMORY_RP | EFI_MEMORY_XP |
+		     EFI_MEMORY_NV | EFI_MEMORY_SP | EFI_MEMORY_CPU_CRYPTO |
+		     EFI_MEMORY_RUNTIME | EFI_MEMORY_MORE_RELIABLE))
+		snprintf(pos, size, "|attr=0x%016llx]",
+			 (unsigned long long)attr);
+	else
+		snprintf(pos, size,
+			 "|%3s|%2s|%2s|%2s|%2s|%2s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]",
+			 attr & EFI_MEMORY_RUNTIME		? "RUN" : "",
+			 attr & EFI_MEMORY_MORE_RELIABLE	? "MR"  : "",
+			 attr & EFI_MEMORY_CPU_CRYPTO   	? "CC"  : "",
+			 attr & EFI_MEMORY_SP			? "SP"  : "",
+			 attr & EFI_MEMORY_NV			? "NV"  : "",
+			 attr & EFI_MEMORY_XP			? "XP"  : "",
+			 attr & EFI_MEMORY_RP			? "RP"  : "",
+			 attr & EFI_MEMORY_WP			? "WP"  : "",
+			 attr & EFI_MEMORY_RO			? "RO"  : "",
+			 attr & EFI_MEMORY_UCE			? "UCE" : "",
+			 attr & EFI_MEMORY_WB			? "WB"  : "",
+			 attr & EFI_MEMORY_WT			? "WT"  : "",
+			 attr & EFI_MEMORY_WC			? "WC"  : "",
+			 attr & EFI_MEMORY_UC			? "UC"  : "");
+	return buf;
+}
+
+/*
+ * IA64 has a funky EFI memory map that doesn't work the same way as
+ * other architectures.
+ */
+#ifndef CONFIG_IA64
+/*
+ * efi_mem_attributes - lookup memmap attributes for physical address
+ * @phys_addr: the physical address to lookup
+ *
+ * Search in the EFI memory map for the region covering
+ * @phys_addr. Returns the EFI memory attributes if the region
+ * was found in the memory map, 0 otherwise.
+ */
+u64 efi_mem_attributes(unsigned long phys_addr)
+{
+	efi_memory_desc_t *md;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return 0;
+
+	for_each_efi_memory_desc(md) {
+		if ((md->phys_addr <= phys_addr) &&
+		    (phys_addr < (md->phys_addr +
+		    (md->num_pages << EFI_PAGE_SHIFT))))
+			return md->attribute;
+	}
+	return 0;
+}
+
+/*
+ * efi_mem_type - lookup memmap type for physical address
+ * @phys_addr: the physical address to lookup
+ *
+ * Search in the EFI memory map for the region covering @phys_addr.
+ * Returns the EFI memory type if the region was found in the memory
+ * map, -EINVAL otherwise.
+ */
+int efi_mem_type(unsigned long phys_addr)
+{
+	const efi_memory_desc_t *md;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return -ENOTSUPP;
+
+	for_each_efi_memory_desc(md) {
+		if ((md->phys_addr <= phys_addr) &&
+		    (phys_addr < (md->phys_addr +
+				  (md->num_pages << EFI_PAGE_SHIFT))))
+			return md->type;
+	}
+	return -EINVAL;
+}
+#endif
+
+int efi_status_to_err(efi_status_t status)
+{
+	int err;
+
+	switch (status) {
+	case EFI_SUCCESS:
+		err = 0;
+		break;
+	case EFI_INVALID_PARAMETER:
+		err = -EINVAL;
+		break;
+	case EFI_OUT_OF_RESOURCES:
+		err = -ENOSPC;
+		break;
+	case EFI_DEVICE_ERROR:
+		err = -EIO;
+		break;
+	case EFI_WRITE_PROTECTED:
+		err = -EROFS;
+		break;
+	case EFI_SECURITY_VIOLATION:
+		err = -EACCES;
+		break;
+	case EFI_NOT_FOUND:
+		err = -ENOENT;
+		break;
+	case EFI_ABORTED:
+		err = -EINTR;
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
+static struct linux_efi_memreserve *efi_memreserve_root __ro_after_init;
+
+static int __init efi_memreserve_map_root(void)
+{
+	if (mem_reserve == EFI_INVALID_TABLE_ADDR)
+		return -ENODEV;
+
+	efi_memreserve_root = memremap(mem_reserve,
+				       sizeof(*efi_memreserve_root),
+				       MEMREMAP_WB);
+	if (WARN_ON_ONCE(!efi_memreserve_root))
+		return -ENOMEM;
+	return 0;
+}
+
+static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size)
+{
+	struct resource *res, *parent;
+	int ret;
+
+	res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
+	if (!res)
+		return -ENOMEM;
+
+	res->name	= "reserved";
+	res->flags	= IORESOURCE_MEM;
+	res->start	= addr;
+	res->end	= addr + size - 1;
+
+	/* we expect a conflict with a 'System RAM' region */
+	parent = request_resource_conflict(&iomem_resource, res);
+	ret = parent ? request_resource(parent, res) : 0;
+
+	/*
+	 * Given that efi_mem_reserve_iomem() can be called at any
+	 * time, only call memblock_reserve() if the architecture
+	 * keeps the infrastructure around.
+	 */
+	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK) && !ret)
+		memblock_reserve(addr, size);
+
+	return ret;
+}
+
+int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size)
+{
+	struct linux_efi_memreserve *rsv;
+	unsigned long prsv;
+	int rc, index;
+
+	if (efi_memreserve_root == (void *)ULONG_MAX)
+		return -ENODEV;
+
+	if (!efi_memreserve_root) {
+		rc = efi_memreserve_map_root();
+		if (rc)
+			return rc;
+	}
+
+	/* first try to find a slot in an existing linked list entry */
+	for (prsv = efi_memreserve_root->next; prsv; ) {
+		rsv = memremap(prsv, sizeof(*rsv), MEMREMAP_WB);
+		if (!rsv)
+			return -ENOMEM;
+		index = atomic_fetch_add_unless(&rsv->count, 1, rsv->size);
+		if (index < rsv->size) {
+			rsv->entry[index].base = addr;
+			rsv->entry[index].size = size;
+
+			memunmap(rsv);
+			return efi_mem_reserve_iomem(addr, size);
+		}
+		prsv = rsv->next;
+		memunmap(rsv);
+	}
+
+	/* no slot found - allocate a new linked list entry */
+	rsv = (struct linux_efi_memreserve *)__get_free_page(GFP_ATOMIC);
+	if (!rsv)
+		return -ENOMEM;
+
+	rc = efi_mem_reserve_iomem(__pa(rsv), SZ_4K);
+	if (rc) {
+		free_page((unsigned long)rsv);
+		return rc;
+	}
+
+	/*
+	 * The memremap() call above assumes that a linux_efi_memreserve entry
+	 * never crosses a page boundary, so let's ensure that this remains true
+	 * even when kexec'ing a 4k pages kernel from a >4k pages kernel, by
+	 * using SZ_4K explicitly in the size calculation below.
+	 */
+	rsv->size = EFI_MEMRESERVE_COUNT(SZ_4K);
+	atomic_set(&rsv->count, 1);
+	rsv->entry[0].base = addr;
+	rsv->entry[0].size = size;
+
+	spin_lock(&efi_mem_reserve_persistent_lock);
+	rsv->next = efi_memreserve_root->next;
+	efi_memreserve_root->next = __pa(rsv);
+	spin_unlock(&efi_mem_reserve_persistent_lock);
+
+	return efi_mem_reserve_iomem(addr, size);
+}
+
+static int __init efi_memreserve_root_init(void)
+{
+	if (efi_memreserve_root)
+		return 0;
+	if (efi_memreserve_map_root())
+		efi_memreserve_root = (void *)ULONG_MAX;
+	return 0;
+}
+early_initcall(efi_memreserve_root_init);
+
+#ifdef CONFIG_KEXEC
+static int update_efi_random_seed(struct notifier_block *nb,
+				  unsigned long code, void *unused)
+{
+	struct linux_efi_random_seed *seed;
+	u32 size = 0;
+
+	if (!kexec_in_progress)
+		return NOTIFY_DONE;
+
+	seed = memremap(efi_rng_seed, sizeof(*seed), MEMREMAP_WB);
+	if (seed != NULL) {
+		size = min(seed->size, EFI_RANDOM_SEED_SIZE);
+		memunmap(seed);
+	} else {
+		pr_err("Could not map UEFI random seed!\n");
+	}
+	if (size > 0) {
+		seed = memremap(efi_rng_seed, sizeof(*seed) + size,
+				MEMREMAP_WB);
+		if (seed != NULL) {
+			seed->size = size;
+			get_random_bytes(seed->bits, seed->size);
+			memunmap(seed);
+		} else {
+			pr_err("Could not map UEFI random seed!\n");
+		}
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block efi_random_seed_nb = {
+	.notifier_call = update_efi_random_seed,
+};
+
+static int __init register_update_efi_random_seed(void)
+{
+	if (efi_rng_seed == EFI_INVALID_TABLE_ADDR)
+		return 0;
+	return register_reboot_notifier(&efi_random_seed_nb);
+}
+late_initcall(register_update_efi_random_seed);
+#endif
diff --git a/drivers/firmware/efi/efibc.c b/drivers/firmware/efi/efibc.c
new file mode 100644
index 000000000..15a47539d
--- /dev/null
+++ b/drivers/firmware/efi/efibc.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * efibc: control EFI bootloaders which obey LoaderEntryOneShot var
+ * Copyright (c) 2013-2016, Intel Corporation.
+ */
+
+#define pr_fmt(fmt) "efibc: " fmt
+
+#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+
+static void efibc_str_to_str16(const char *str, efi_char16_t *str16)
+{
+	size_t i;
+
+	for (i = 0; i < strlen(str); i++)
+		str16[i] = str[i];
+
+	str16[i] = '\0';
+}
+
+static int efibc_set_variable(const char *name, const char *value)
+{
+	int ret;
+	efi_guid_t guid = LINUX_EFI_LOADER_ENTRY_GUID;
+	struct efivar_entry *entry;
+	size_t size = (strlen(value) + 1) * sizeof(efi_char16_t);
+
+	if (size > sizeof(entry->var.Data)) {
+		pr_err("value is too large (%zu bytes) for '%s' EFI variable\n", size, name);
+		return -EINVAL;
+	}
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		pr_err("failed to allocate efivar entry for '%s' EFI variable\n", name);
+		return -ENOMEM;
+	}
+
+	efibc_str_to_str16(name, entry->var.VariableName);
+	efibc_str_to_str16(value, (efi_char16_t *)entry->var.Data);
+	memcpy(&entry->var.VendorGuid, &guid, sizeof(guid));
+
+	ret = efivar_entry_set_safe(entry->var.VariableName,
+				    entry->var.VendorGuid,
+				    EFI_VARIABLE_NON_VOLATILE
+				    | EFI_VARIABLE_BOOTSERVICE_ACCESS
+				    | EFI_VARIABLE_RUNTIME_ACCESS,
+				    false, size, entry->var.Data);
+
+	if (ret)
+		pr_err("failed to set %s EFI variable: 0x%x\n",
+		       name, ret);
+
+	kfree(entry);
+	return ret;
+}
+
+static int efibc_reboot_notifier_call(struct notifier_block *notifier,
+				      unsigned long event, void *data)
+{
+	const char *reason = "shutdown";
+	int ret;
+
+	if (event == SYS_RESTART)
+		reason = "reboot";
+
+	ret = efibc_set_variable("LoaderEntryRebootReason", reason);
+	if (ret || !data)
+		return NOTIFY_DONE;
+
+	efibc_set_variable("LoaderEntryOneShot", (char *)data);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block efibc_reboot_notifier = {
+	.notifier_call = efibc_reboot_notifier_call,
+};
+
+static int __init efibc_init(void)
+{
+	int ret;
+
+	if (!efivars_kobject() || !efivar_supports_writes())
+		return -ENODEV;
+
+	ret = register_reboot_notifier(&efibc_reboot_notifier);
+	if (ret)
+		pr_err("unable to register reboot notifier\n");
+
+	return ret;
+}
+module_init(efibc_init);
+
+static void __exit efibc_exit(void)
+{
+	unregister_reboot_notifier(&efibc_reboot_notifier);
+}
+module_exit(efibc_exit);
+
+MODULE_AUTHOR("Jeremy Compostella <jeremy.compostella@intel.com>");
+MODULE_AUTHOR("Matt Gumbel <matthew.k.gumbel@intel.com");
+MODULE_DESCRIPTION("EFI Bootloader Control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c
new file mode 100644
index 000000000..e6b16b3a1
--- /dev/null
+++ b/drivers/firmware/efi/efivars.c
@@ -0,0 +1,670 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Originally from efivars.c,
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ *
+ * This code takes all variables accessible from EFI runtime and
+ *  exports them via sysfs
+ */
+
+#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/ucs2_string.h>
+#include <linux/compat.h>
+
+#define EFIVARS_VERSION "0.08"
+#define EFIVARS_DATE "2004-May-17"
+
+MODULE_AUTHOR("Matt Domsch <Matt_Domsch@Dell.com>");
+MODULE_DESCRIPTION("sysfs interface to EFI Variables");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(EFIVARS_VERSION);
+
+static LIST_HEAD(efivar_sysfs_list);
+
+static struct kset *efivars_kset;
+
+static struct bin_attribute *efivars_new_var;
+static struct bin_attribute *efivars_del_var;
+
+struct compat_efi_variable {
+	efi_char16_t  VariableName[EFI_VAR_NAME_LEN/sizeof(efi_char16_t)];
+	efi_guid_t    VendorGuid;
+	__u32         DataSize;
+	__u8          Data[1024];
+	__u32         Status;
+	__u32         Attributes;
+} __packed;
+
+struct efivar_attribute {
+	struct attribute attr;
+	ssize_t (*show) (struct efivar_entry *entry, char *buf);
+	ssize_t (*store)(struct efivar_entry *entry, const char *buf, size_t count);
+};
+
+#define EFIVAR_ATTR(_name, _mode, _show, _store) \
+struct efivar_attribute efivar_attr_##_name = { \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
+	.show = _show, \
+	.store = _store, \
+};
+
+#define to_efivar_attr(_attr) container_of(_attr, struct efivar_attribute, attr)
+#define to_efivar_entry(obj)  container_of(obj, struct efivar_entry, kobj)
+
+/*
+ * Prototype for sysfs creation function
+ */
+static int
+efivar_create_sysfs_entry(struct efivar_entry *new_var);
+
+static ssize_t
+efivar_guid_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	char *str = buf;
+
+	if (!entry || !buf)
+		return 0;
+
+	efi_guid_to_str(&var->VendorGuid, str);
+	str += strlen(str);
+	str += sprintf(str, "\n");
+
+	return str - buf;
+}
+
+static ssize_t
+efivar_attr_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
+	char *str = buf;
+	int ret;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
+		return -EIO;
+
+	if (var->Attributes & EFI_VARIABLE_NON_VOLATILE)
+		str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
+	if (var->Attributes & EFI_VARIABLE_BOOTSERVICE_ACCESS)
+		str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_RUNTIME_ACCESS)
+		str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD)
+		str += sprintf(str, "EFI_VARIABLE_HARDWARE_ERROR_RECORD\n");
+	if (var->Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes &
+			EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_APPEND_WRITE)
+		str += sprintf(str, "EFI_VARIABLE_APPEND_WRITE\n");
+	return str - buf;
+}
+
+static ssize_t
+efivar_size_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
+	char *str = buf;
+	int ret;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
+		return -EIO;
+
+	str += sprintf(str, "0x%lx\n", var->DataSize);
+	return str - buf;
+}
+
+static ssize_t
+efivar_data_read(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	unsigned long size = sizeof(var->Data);
+	int ret;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	ret = efivar_entry_get(entry, &var->Attributes, &size, var->Data);
+	var->DataSize = size;
+	if (ret)
+		return -EIO;
+
+	memcpy(buf, var->Data, var->DataSize);
+	return var->DataSize;
+}
+
+static inline int
+sanity_check(struct efi_variable *var, efi_char16_t *name, efi_guid_t vendor,
+	     unsigned long size, u32 attributes, u8 *data)
+{
+	/*
+	 * If only updating the variable data, then the name
+	 * and guid should remain the same
+	 */
+	if (memcmp(name, var->VariableName, sizeof(var->VariableName)) ||
+		efi_guidcmp(vendor, var->VendorGuid)) {
+		printk(KERN_ERR "efivars: Cannot edit the wrong variable!\n");
+		return -EINVAL;
+	}
+
+	if ((size <= 0) || (attributes == 0)){
+		printk(KERN_ERR "efivars: DataSize & Attributes must be valid!\n");
+		return -EINVAL;
+	}
+
+	if ((attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    efivar_validate(vendor, name, data, size) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void
+copy_out_compat(struct efi_variable *dst, struct compat_efi_variable *src)
+{
+	memcpy(dst->VariableName, src->VariableName, EFI_VAR_NAME_LEN);
+	memcpy(dst->Data, src->Data, sizeof(src->Data));
+
+	dst->VendorGuid = src->VendorGuid;
+	dst->DataSize = src->DataSize;
+	dst->Attributes = src->Attributes;
+}
+
+/*
+ * We allow each variable to be edited via rewriting the
+ * entire efi variable structure.
+ */
+static ssize_t
+efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
+{
+	struct efi_variable *new_var, *var = &entry->var;
+	efi_char16_t *name;
+	unsigned long size;
+	efi_guid_t vendor;
+	u32 attributes;
+	u8 *data;
+	int err;
+
+	if (!entry || !buf)
+		return -EINVAL;
+
+	if (in_compat_syscall()) {
+		struct compat_efi_variable *compat;
+
+		if (count != sizeof(*compat))
+			return -EINVAL;
+
+		compat = (struct compat_efi_variable *)buf;
+		attributes = compat->Attributes;
+		vendor = compat->VendorGuid;
+		name = compat->VariableName;
+		size = compat->DataSize;
+		data = compat->Data;
+
+		err = sanity_check(var, name, vendor, size, attributes, data);
+		if (err)
+			return err;
+
+		copy_out_compat(&entry->var, compat);
+	} else {
+		if (count != sizeof(struct efi_variable))
+			return -EINVAL;
+
+		new_var = (struct efi_variable *)buf;
+
+		attributes = new_var->Attributes;
+		vendor = new_var->VendorGuid;
+		name = new_var->VariableName;
+		size = new_var->DataSize;
+		data = new_var->Data;
+
+		err = sanity_check(var, name, vendor, size, attributes, data);
+		if (err)
+			return err;
+
+		memcpy(&entry->var, new_var, count);
+	}
+
+	err = efivar_entry_set(entry, attributes, size, data, NULL);
+	if (err) {
+		printk(KERN_WARNING "efivars: set_variable() failed: status=%d\n", err);
+		return -EIO;
+	}
+
+	return count;
+}
+
+static ssize_t
+efivar_show_raw(struct efivar_entry *entry, char *buf)
+{
+	struct efi_variable *var = &entry->var;
+	struct compat_efi_variable *compat;
+	unsigned long datasize = sizeof(var->Data);
+	size_t size;
+	int ret;
+
+	if (!entry || !buf)
+		return 0;
+
+	ret = efivar_entry_get(entry, &var->Attributes, &datasize, var->Data);
+	var->DataSize = datasize;
+	if (ret)
+		return -EIO;
+
+	if (in_compat_syscall()) {
+		compat = (struct compat_efi_variable *)buf;
+
+		size = sizeof(*compat);
+		memcpy(compat->VariableName, var->VariableName,
+			EFI_VAR_NAME_LEN);
+		memcpy(compat->Data, var->Data, sizeof(compat->Data));
+
+		compat->VendorGuid = var->VendorGuid;
+		compat->DataSize = var->DataSize;
+		compat->Attributes = var->Attributes;
+	} else {
+		size = sizeof(*var);
+		memcpy(buf, var, size);
+	}
+
+	return size;
+}
+
+/*
+ * Generic read/write functions that call the specific functions of
+ * the attributes...
+ */
+static ssize_t efivar_attr_show(struct kobject *kobj, struct attribute *attr,
+				char *buf)
+{
+	struct efivar_entry *var = to_efivar_entry(kobj);
+	struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (efivar_attr->show) {
+		ret = efivar_attr->show(var, buf);
+	}
+	return ret;
+}
+
+static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr,
+				const char *buf, size_t count)
+{
+	struct efivar_entry *var = to_efivar_entry(kobj);
+	struct efivar_attribute *efivar_attr = to_efivar_attr(attr);
+	ssize_t ret = -EIO;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (efivar_attr->store)
+		ret = efivar_attr->store(var, buf, count);
+
+	return ret;
+}
+
+static const struct sysfs_ops efivar_attr_ops = {
+	.show = efivar_attr_show,
+	.store = efivar_attr_store,
+};
+
+static void efivar_release(struct kobject *kobj)
+{
+	struct efivar_entry *var = to_efivar_entry(kobj);
+	kfree(var);
+}
+
+static EFIVAR_ATTR(guid, 0400, efivar_guid_read, NULL);
+static EFIVAR_ATTR(attributes, 0400, efivar_attr_read, NULL);
+static EFIVAR_ATTR(size, 0400, efivar_size_read, NULL);
+static EFIVAR_ATTR(data, 0400, efivar_data_read, NULL);
+static EFIVAR_ATTR(raw_var, 0600, efivar_show_raw, efivar_store_raw);
+
+static struct attribute *def_attrs[] = {
+	&efivar_attr_guid.attr,
+	&efivar_attr_size.attr,
+	&efivar_attr_attributes.attr,
+	&efivar_attr_data.attr,
+	&efivar_attr_raw_var.attr,
+	NULL,
+};
+
+static struct kobj_type efivar_ktype = {
+	.release = efivar_release,
+	.sysfs_ops = &efivar_attr_ops,
+	.default_attrs = def_attrs,
+};
+
+static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
+{
+	struct compat_efi_variable *compat = (struct compat_efi_variable *)buf;
+	struct efi_variable *new_var = (struct efi_variable *)buf;
+	struct efivar_entry *new_entry;
+	bool need_compat = in_compat_syscall();
+	efi_char16_t *name;
+	unsigned long size;
+	u32 attributes;
+	u8 *data;
+	int err;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (need_compat) {
+		if (count != sizeof(*compat))
+			return -EINVAL;
+
+		attributes = compat->Attributes;
+		name = compat->VariableName;
+		size = compat->DataSize;
+		data = compat->Data;
+	} else {
+		if (count != sizeof(*new_var))
+			return -EINVAL;
+
+		attributes = new_var->Attributes;
+		name = new_var->VariableName;
+		size = new_var->DataSize;
+		data = new_var->Data;
+	}
+
+	if ((attributes & ~EFI_VARIABLE_MASK) != 0 ||
+	    efivar_validate(new_var->VendorGuid, name, data,
+			    size) == false) {
+		printk(KERN_ERR "efivars: Malformed variable content\n");
+		return -EINVAL;
+	}
+
+	new_entry = kzalloc(sizeof(*new_entry), GFP_KERNEL);
+	if (!new_entry)
+		return -ENOMEM;
+
+	if (need_compat)
+		copy_out_compat(&new_entry->var, compat);
+	else
+		memcpy(&new_entry->var, new_var, sizeof(*new_var));
+
+	err = efivar_entry_set(new_entry, attributes, size,
+			       data, &efivar_sysfs_list);
+	if (err) {
+		if (err == -EEXIST)
+			err = -EINVAL;
+		goto out;
+	}
+
+	if (efivar_create_sysfs_entry(new_entry)) {
+		printk(KERN_WARNING "efivars: failed to create sysfs entry.\n");
+		kfree(new_entry);
+	}
+	return count;
+
+out:
+	kfree(new_entry);
+	return err;
+}
+
+static ssize_t efivar_delete(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
+{
+	struct efi_variable *del_var = (struct efi_variable *)buf;
+	struct compat_efi_variable *compat;
+	struct efivar_entry *entry;
+	efi_char16_t *name;
+	efi_guid_t vendor;
+	int err = 0;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (in_compat_syscall()) {
+		if (count != sizeof(*compat))
+			return -EINVAL;
+
+		compat = (struct compat_efi_variable *)buf;
+		name = compat->VariableName;
+		vendor = compat->VendorGuid;
+	} else {
+		if (count != sizeof(*del_var))
+			return -EINVAL;
+
+		name = del_var->VariableName;
+		vendor = del_var->VendorGuid;
+	}
+
+	if (efivar_entry_iter_begin())
+		return -EINTR;
+	entry = efivar_entry_find(name, vendor, &efivar_sysfs_list, true);
+	if (!entry)
+		err = -EINVAL;
+	else if (__efivar_entry_delete(entry))
+		err = -EIO;
+
+	if (err) {
+		efivar_entry_iter_end();
+		return err;
+	}
+
+	if (!entry->scanning) {
+		efivar_entry_iter_end();
+		efivar_unregister(entry);
+	} else
+		efivar_entry_iter_end();
+
+	/* It's dead Jim.... */
+	return count;
+}
+
+/**
+ * efivar_create_sysfs_entry - create a new entry in sysfs
+ * @new_var: efivar entry to create
+ *
+ * Returns 0 on success, negative error code on failure
+ */
+static int
+efivar_create_sysfs_entry(struct efivar_entry *new_var)
+{
+	int short_name_size;
+	char *short_name;
+	unsigned long utf8_name_size;
+	efi_char16_t *variable_name = new_var->var.VariableName;
+	int ret;
+
+	/*
+	 * Length of the variable bytes in UTF8, plus the '-' separator,
+	 * plus the GUID, plus trailing NUL
+	 */
+	utf8_name_size = ucs2_utf8size(variable_name);
+	short_name_size = utf8_name_size + 1 + EFI_VARIABLE_GUID_LEN + 1;
+
+	short_name = kmalloc(short_name_size, GFP_KERNEL);
+	if (!short_name)
+		return -ENOMEM;
+
+	ucs2_as_utf8(short_name, variable_name, short_name_size);
+
+	/* This is ugly, but necessary to separate one vendor's
+	   private variables from another's.         */
+	short_name[utf8_name_size] = '-';
+	efi_guid_to_str(&new_var->var.VendorGuid,
+			 short_name + utf8_name_size + 1);
+
+	new_var->kobj.kset = efivars_kset;
+
+	ret = kobject_init_and_add(&new_var->kobj, &efivar_ktype,
+				   NULL, "%s", short_name);
+	kfree(short_name);
+	if (ret) {
+		kobject_put(&new_var->kobj);
+		return ret;
+	}
+
+	kobject_uevent(&new_var->kobj, KOBJ_ADD);
+	if (efivar_entry_add(new_var, &efivar_sysfs_list)) {
+		efivar_unregister(new_var);
+		return -EINTR;
+	}
+
+	return 0;
+}
+
+static int
+create_efivars_bin_attributes(void)
+{
+	struct bin_attribute *attr;
+	int error;
+
+	/* new_var */
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	if (!attr)
+		return -ENOMEM;
+
+	attr->attr.name = "new_var";
+	attr->attr.mode = 0200;
+	attr->write = efivar_create;
+	efivars_new_var = attr;
+
+	/* del_var */
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+	if (!attr) {
+		error = -ENOMEM;
+		goto out_free;
+	}
+	attr->attr.name = "del_var";
+	attr->attr.mode = 0200;
+	attr->write = efivar_delete;
+	efivars_del_var = attr;
+
+	sysfs_bin_attr_init(efivars_new_var);
+	sysfs_bin_attr_init(efivars_del_var);
+
+	/* Register */
+	error = sysfs_create_bin_file(&efivars_kset->kobj, efivars_new_var);
+	if (error) {
+		printk(KERN_ERR "efivars: unable to create new_var sysfs file"
+			" due to error %d\n", error);
+		goto out_free;
+	}
+
+	error = sysfs_create_bin_file(&efivars_kset->kobj, efivars_del_var);
+	if (error) {
+		printk(KERN_ERR "efivars: unable to create del_var sysfs file"
+			" due to error %d\n", error);
+		sysfs_remove_bin_file(&efivars_kset->kobj, efivars_new_var);
+		goto out_free;
+	}
+
+	return 0;
+out_free:
+	kfree(efivars_del_var);
+	efivars_del_var = NULL;
+	kfree(efivars_new_var);
+	efivars_new_var = NULL;
+	return error;
+}
+
+static int efivars_sysfs_callback(efi_char16_t *name, efi_guid_t vendor,
+				  unsigned long name_size, void *data)
+{
+	struct efivar_entry *entry;
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	memcpy(entry->var.VariableName, name, name_size);
+	memcpy(&(entry->var.VendorGuid), &vendor, sizeof(efi_guid_t));
+
+	efivar_create_sysfs_entry(entry);
+
+	return 0;
+}
+
+static int efivar_sysfs_destroy(struct efivar_entry *entry, void *data)
+{
+	int err = efivar_entry_remove(entry);
+
+	if (err)
+		return err;
+	efivar_unregister(entry);
+	return 0;
+}
+
+static void efivars_sysfs_exit(void)
+{
+	/* Remove all entries and destroy */
+	int err;
+
+	err = __efivar_entry_iter(efivar_sysfs_destroy, &efivar_sysfs_list,
+				  NULL, NULL);
+	if (err) {
+		pr_err("efivars: Failed to destroy sysfs entries\n");
+		return;
+	}
+
+	if (efivars_new_var)
+		sysfs_remove_bin_file(&efivars_kset->kobj, efivars_new_var);
+	if (efivars_del_var)
+		sysfs_remove_bin_file(&efivars_kset->kobj, efivars_del_var);
+	kfree(efivars_new_var);
+	kfree(efivars_del_var);
+	kset_unregister(efivars_kset);
+}
+
+static int efivars_sysfs_init(void)
+{
+	struct kobject *parent_kobj = efivars_kobject();
+	int error = 0;
+
+	/* No efivars has been registered yet */
+	if (!parent_kobj || !efivar_supports_writes())
+		return 0;
+
+	printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION,
+	       EFIVARS_DATE);
+
+	efivars_kset = kset_create_and_add("vars", NULL, parent_kobj);
+	if (!efivars_kset) {
+		printk(KERN_ERR "efivars: Subsystem registration failed.\n");
+		return -ENOMEM;
+	}
+
+	efivar_init(efivars_sysfs_callback, NULL, true, &efivar_sysfs_list);
+
+	error = create_efivars_bin_attributes();
+	if (error) {
+		efivars_sysfs_exit();
+		return error;
+	}
+
+	return 0;
+}
+
+module_init(efivars_sysfs_init);
+module_exit(efivars_sysfs_exit);
diff --git a/drivers/firmware/efi/embedded-firmware.c b/drivers/firmware/efi/embedded-firmware.c
new file mode 100644
index 000000000..21ae0c482
--- /dev/null
+++ b/drivers/firmware/efi/embedded-firmware.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for extracting embedded firmware for peripherals from EFI code,
+ *
+ * Copyright (c) 2018 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/efi_embedded_fw.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+#include <crypto/sha.h>
+
+/* Exported for use by lib/test_firmware.c only */
+LIST_HEAD(efi_embedded_fw_list);
+EXPORT_SYMBOL_NS_GPL(efi_embedded_fw_list, TEST_FIRMWARE);
+bool efi_embedded_fw_checked;
+EXPORT_SYMBOL_NS_GPL(efi_embedded_fw_checked, TEST_FIRMWARE);
+
+static const struct dmi_system_id * const embedded_fw_table[] = {
+#ifdef CONFIG_TOUCHSCREEN_DMI
+	touchscreen_dmi_table,
+#endif
+	NULL
+};
+
+/*
+ * Note the efi_check_for_embedded_firmwares() code currently makes the
+ * following 2 assumptions. This may needs to be revisited if embedded firmware
+ * is found where this is not true:
+ * 1) The firmware is only found in EFI_BOOT_SERVICES_CODE memory segments
+ * 2) The firmware always starts at an offset which is a multiple of 8 bytes
+ */
+static int __init efi_check_md_for_embedded_firmware(
+	efi_memory_desc_t *md, const struct efi_embedded_fw_desc *desc)
+{
+	struct efi_embedded_fw *fw;
+	u8 hash[32];
+	u64 i, size;
+	u8 *map;
+
+	size = md->num_pages << EFI_PAGE_SHIFT;
+	map = memremap(md->phys_addr, size, MEMREMAP_WB);
+	if (!map) {
+		pr_err("Error mapping EFI mem at %#llx\n", md->phys_addr);
+		return -ENOMEM;
+	}
+
+	for (i = 0; (i + desc->length) <= size; i += 8) {
+		if (memcmp(map + i, desc->prefix, EFI_EMBEDDED_FW_PREFIX_LEN))
+			continue;
+
+		sha256(map + i, desc->length, hash);
+		if (memcmp(hash, desc->sha256, 32) == 0)
+			break;
+	}
+	if ((i + desc->length) > size) {
+		memunmap(map);
+		return -ENOENT;
+	}
+
+	pr_info("Found EFI embedded fw '%s'\n", desc->name);
+
+	fw = kmalloc(sizeof(*fw), GFP_KERNEL);
+	if (!fw) {
+		memunmap(map);
+		return -ENOMEM;
+	}
+
+	fw->data = kmemdup(map + i, desc->length, GFP_KERNEL);
+	memunmap(map);
+	if (!fw->data) {
+		kfree(fw);
+		return -ENOMEM;
+	}
+
+	fw->name = desc->name;
+	fw->length = desc->length;
+	list_add(&fw->list, &efi_embedded_fw_list);
+
+	return 0;
+}
+
+void __init efi_check_for_embedded_firmwares(void)
+{
+	const struct efi_embedded_fw_desc *fw_desc;
+	const struct dmi_system_id *dmi_id;
+	efi_memory_desc_t *md;
+	int i, r;
+
+	for (i = 0; embedded_fw_table[i]; i++) {
+		dmi_id = dmi_first_match(embedded_fw_table[i]);
+		if (!dmi_id)
+			continue;
+
+		fw_desc = dmi_id->driver_data;
+
+		/*
+		 * In some drivers the struct driver_data contains may contain
+		 * other driver specific data after the fw_desc struct; and
+		 * the fw_desc struct itself may be empty, skip these.
+		 */
+		if (!fw_desc->name)
+			continue;
+
+		for_each_efi_memory_desc(md) {
+			if (md->type != EFI_BOOT_SERVICES_CODE)
+				continue;
+
+			r = efi_check_md_for_embedded_firmware(md, fw_desc);
+			if (r == 0)
+				break;
+		}
+	}
+
+	efi_embedded_fw_checked = true;
+}
+
+int efi_get_embedded_fw(const char *name, const u8 **data, size_t *size)
+{
+	struct efi_embedded_fw *iter, *fw = NULL;
+
+	if (!efi_embedded_fw_checked) {
+		pr_warn("Warning %s called while we did not check for embedded fw\n",
+			__func__);
+		return -ENOENT;
+	}
+
+	list_for_each_entry(iter, &efi_embedded_fw_list, list) {
+		if (strcmp(name, iter->name) == 0) {
+			fw = iter;
+			break;
+		}
+	}
+
+	if (!fw)
+		return -ENOENT;
+
+	*data = fw->data;
+	*size = fw->length;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efi_get_embedded_fw);
diff --git a/drivers/firmware/efi/esrt.c b/drivers/firmware/efi/esrt.c
new file mode 100644
index 000000000..d59152721
--- /dev/null
+++ b/drivers/firmware/efi/esrt.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * esrt.c
+ *
+ * This module exports EFI System Resource Table (ESRT) entries into userspace
+ * through the sysfs file system. The ESRT provides a read-only catalog of
+ * system components for which the system accepts firmware upgrades via UEFI's
+ * "Capsule Update" feature. This module allows userland utilities to evaluate
+ * what firmware updates can be applied to this system, and potentially arrange
+ * for those updates to occur.
+ *
+ * Data is currently found below /sys/firmware/efi/esrt/...
+ */
+#define pr_fmt(fmt) "esrt: " fmt
+
+#include <linux/capability.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/early_ioremap.h>
+
+struct efi_system_resource_entry_v1 {
+	efi_guid_t	fw_class;
+	u32		fw_type;
+	u32		fw_version;
+	u32		lowest_supported_fw_version;
+	u32		capsule_flags;
+	u32		last_attempt_version;
+	u32		last_attempt_status;
+};
+
+/*
+ * _count and _version are what they seem like.  _max is actually just
+ * accounting info for the firmware when creating the table; it should never
+ * have been exposed to us.  To wit, the spec says:
+ * The maximum number of resource array entries that can be within the
+ * table without reallocating the table, must not be zero.
+ * Since there's no guidance about what that means in terms of memory layout,
+ * it means nothing to us.
+ */
+struct efi_system_resource_table {
+	u32	fw_resource_count;
+	u32	fw_resource_count_max;
+	u64	fw_resource_version;
+	u8	entries[];
+};
+
+static phys_addr_t esrt_data;
+static size_t esrt_data_size;
+
+static struct efi_system_resource_table *esrt;
+
+struct esre_entry {
+	union {
+		struct efi_system_resource_entry_v1 *esre1;
+	} esre;
+
+	struct kobject kobj;
+	struct list_head list;
+};
+
+/* global list of esre_entry. */
+static LIST_HEAD(entry_list);
+
+/* entry attribute */
+struct esre_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct esre_entry *entry, char *buf);
+	ssize_t (*store)(struct esre_entry *entry,
+			 const char *buf, size_t count);
+};
+
+static struct esre_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct esre_entry, kobj);
+}
+
+static struct esre_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct esre_attribute, attr);
+}
+
+static ssize_t esre_attr_show(struct kobject *kobj,
+			      struct attribute *_attr, char *buf)
+{
+	struct esre_entry *entry = to_entry(kobj);
+	struct esre_attribute *attr = to_attr(_attr);
+
+	/* Don't tell normal users what firmware versions we've got... */
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops esre_attr_ops = {
+	.show = esre_attr_show,
+};
+
+/* Generic ESRT Entry ("ESRE") support. */
+static ssize_t fw_class_show(struct esre_entry *entry, char *buf)
+{
+	char *str = buf;
+
+	efi_guid_to_str(&entry->esre.esre1->fw_class, str);
+	str += strlen(str);
+	str += sprintf(str, "\n");
+
+	return str - buf;
+}
+
+static struct esre_attribute esre_fw_class = __ATTR_RO_MODE(fw_class, 0400);
+
+#define esre_attr_decl(name, size, fmt) \
+static ssize_t name##_show(struct esre_entry *entry, char *buf) \
+{ \
+	return sprintf(buf, fmt "\n", \
+		       le##size##_to_cpu(entry->esre.esre1->name)); \
+} \
+\
+static struct esre_attribute esre_##name = __ATTR_RO_MODE(name, 0400)
+
+esre_attr_decl(fw_type, 32, "%u");
+esre_attr_decl(fw_version, 32, "%u");
+esre_attr_decl(lowest_supported_fw_version, 32, "%u");
+esre_attr_decl(capsule_flags, 32, "0x%x");
+esre_attr_decl(last_attempt_version, 32, "%u");
+esre_attr_decl(last_attempt_status, 32, "%u");
+
+static struct attribute *esre1_attrs[] = {
+	&esre_fw_class.attr,
+	&esre_fw_type.attr,
+	&esre_fw_version.attr,
+	&esre_lowest_supported_fw_version.attr,
+	&esre_capsule_flags.attr,
+	&esre_last_attempt_version.attr,
+	&esre_last_attempt_status.attr,
+	NULL
+};
+static void esre_release(struct kobject *kobj)
+{
+	struct esre_entry *entry = to_entry(kobj);
+
+	list_del(&entry->list);
+	kfree(entry);
+}
+
+static struct kobj_type esre1_ktype = {
+	.release = esre_release,
+	.sysfs_ops = &esre_attr_ops,
+	.default_attrs = esre1_attrs,
+};
+
+
+static struct kobject *esrt_kobj;
+static struct kset *esrt_kset;
+
+static int esre_create_sysfs_entry(void *esre, int entry_num)
+{
+	struct esre_entry *entry;
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	entry->kobj.kset = esrt_kset;
+
+	if (esrt->fw_resource_version == 1) {
+		int rc = 0;
+
+		entry->esre.esre1 = esre;
+		rc = kobject_init_and_add(&entry->kobj, &esre1_ktype, NULL,
+					  "entry%d", entry_num);
+		if (rc) {
+			kobject_put(&entry->kobj);
+			return rc;
+		}
+	}
+
+	list_add_tail(&entry->list, &entry_list);
+	return 0;
+}
+
+/* support for displaying ESRT fields at the top level */
+#define esrt_attr_decl(name, size, fmt) \
+static ssize_t name##_show(struct kobject *kobj, \
+				  struct kobj_attribute *attr, char *buf)\
+{ \
+	return sprintf(buf, fmt "\n", le##size##_to_cpu(esrt->name)); \
+} \
+\
+static struct kobj_attribute esrt_##name = __ATTR_RO_MODE(name, 0400)
+
+esrt_attr_decl(fw_resource_count, 32, "%u");
+esrt_attr_decl(fw_resource_count_max, 32, "%u");
+esrt_attr_decl(fw_resource_version, 64, "%llu");
+
+static struct attribute *esrt_attrs[] = {
+	&esrt_fw_resource_count.attr,
+	&esrt_fw_resource_count_max.attr,
+	&esrt_fw_resource_version.attr,
+	NULL,
+};
+
+static inline int esrt_table_exists(void)
+{
+	if (!efi_enabled(EFI_CONFIG_TABLES))
+		return 0;
+	if (efi.esrt == EFI_INVALID_TABLE_ADDR)
+		return 0;
+	return 1;
+}
+
+static umode_t esrt_attr_is_visible(struct kobject *kobj,
+				    struct attribute *attr, int n)
+{
+	if (!esrt_table_exists())
+		return 0;
+	return attr->mode;
+}
+
+static const struct attribute_group esrt_attr_group = {
+	.attrs = esrt_attrs,
+	.is_visible = esrt_attr_is_visible,
+};
+
+/*
+ * remap the table, validate it, mark it reserved and unmap it.
+ */
+void __init efi_esrt_init(void)
+{
+	void *va;
+	struct efi_system_resource_table tmpesrt;
+	size_t size, max, entry_size, entries_size;
+	efi_memory_desc_t md;
+	int rc;
+	phys_addr_t end;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return;
+
+	pr_debug("esrt-init: loading.\n");
+	if (!esrt_table_exists())
+		return;
+
+	rc = efi_mem_desc_lookup(efi.esrt, &md);
+	if (rc < 0 ||
+	    (!(md.attribute & EFI_MEMORY_RUNTIME) &&
+	     md.type != EFI_BOOT_SERVICES_DATA &&
+	     md.type != EFI_RUNTIME_SERVICES_DATA)) {
+		pr_warn("ESRT header is not in the memory map.\n");
+		return;
+	}
+
+	max = efi_mem_desc_end(&md);
+	if (max < efi.esrt) {
+		pr_err("EFI memory descriptor is invalid. (esrt: %p max: %p)\n",
+		       (void *)efi.esrt, (void *)max);
+		return;
+	}
+
+	size = sizeof(*esrt);
+	max -= efi.esrt;
+
+	if (max < size) {
+		pr_err("ESRT header doesn't fit on single memory map entry. (size: %zu max: %zu)\n",
+		       size, max);
+		return;
+	}
+
+	va = early_memremap(efi.esrt, size);
+	if (!va) {
+		pr_err("early_memremap(%p, %zu) failed.\n", (void *)efi.esrt,
+		       size);
+		return;
+	}
+
+	memcpy(&tmpesrt, va, sizeof(tmpesrt));
+	early_memunmap(va, size);
+
+	if (tmpesrt.fw_resource_version != 1) {
+		pr_err("Unsupported ESRT version %lld.\n",
+		       tmpesrt.fw_resource_version);
+		return;
+	}
+
+	entry_size = sizeof(struct efi_system_resource_entry_v1);
+	if (tmpesrt.fw_resource_count > 0 && max - size < entry_size) {
+		pr_err("ESRT memory map entry can only hold the header. (max: %zu size: %zu)\n",
+		       max - size, entry_size);
+		return;
+	}
+
+	/*
+	 * The format doesn't really give us any boundary to test here,
+	 * so I'm making up 128 as the max number of individually updatable
+	 * components we support.
+	 * 128 should be pretty excessive, but there's still some chance
+	 * somebody will do that someday and we'll need to raise this.
+	 */
+	if (tmpesrt.fw_resource_count > 128) {
+		pr_err("ESRT says fw_resource_count has very large value %d.\n",
+		       tmpesrt.fw_resource_count);
+		return;
+	}
+
+	/*
+	 * We know it can't be larger than N * sizeof() here, and N is limited
+	 * by the previous test to a small number, so there's no overflow.
+	 */
+	entries_size = tmpesrt.fw_resource_count * entry_size;
+	if (max < size + entries_size) {
+		pr_err("ESRT does not fit on single memory map entry (size: %zu max: %zu)\n",
+		       size, max);
+		return;
+	}
+
+	size += entries_size;
+
+	esrt_data = (phys_addr_t)efi.esrt;
+	esrt_data_size = size;
+
+	end = esrt_data + size;
+	pr_info("Reserving ESRT space from %pa to %pa.\n", &esrt_data, &end);
+	if (md.type == EFI_BOOT_SERVICES_DATA)
+		efi_mem_reserve(esrt_data, esrt_data_size);
+
+	pr_debug("esrt-init: loaded.\n");
+}
+
+static int __init register_entries(void)
+{
+	struct efi_system_resource_entry_v1 *v1_entries = (void *)esrt->entries;
+	int i, rc;
+
+	if (!esrt_table_exists())
+		return 0;
+
+	for (i = 0; i < le32_to_cpu(esrt->fw_resource_count); i++) {
+		void *esre = NULL;
+		if (esrt->fw_resource_version == 1) {
+			esre = &v1_entries[i];
+		} else {
+			pr_err("Unsupported ESRT version %lld.\n",
+			       esrt->fw_resource_version);
+			return -EINVAL;
+		}
+
+		rc = esre_create_sysfs_entry(esre, i);
+		if (rc < 0) {
+			pr_err("ESRT entry creation failed with error %d.\n",
+			       rc);
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static void cleanup_entry_list(void)
+{
+	struct esre_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &entry_list, list) {
+		kobject_put(&entry->kobj);
+	}
+}
+
+static int __init esrt_sysfs_init(void)
+{
+	int error;
+
+	pr_debug("esrt-sysfs: loading.\n");
+	if (!esrt_data || !esrt_data_size)
+		return -ENOSYS;
+
+	esrt = memremap(esrt_data, esrt_data_size, MEMREMAP_WB);
+	if (!esrt) {
+		pr_err("memremap(%pa, %zu) failed.\n", &esrt_data,
+		       esrt_data_size);
+		return -ENOMEM;
+	}
+
+	esrt_kobj = kobject_create_and_add("esrt", efi_kobj);
+	if (!esrt_kobj) {
+		pr_err("Firmware table registration failed.\n");
+		error = -ENOMEM;
+		goto err;
+	}
+
+	error = sysfs_create_group(esrt_kobj, &esrt_attr_group);
+	if (error) {
+		pr_err("Sysfs attribute export failed with error %d.\n",
+		       error);
+		goto err_remove_esrt;
+	}
+
+	esrt_kset = kset_create_and_add("entries", NULL, esrt_kobj);
+	if (!esrt_kset) {
+		pr_err("kset creation failed.\n");
+		error = -ENOMEM;
+		goto err_remove_group;
+	}
+
+	error = register_entries();
+	if (error)
+		goto err_cleanup_list;
+
+	pr_debug("esrt-sysfs: loaded.\n");
+
+	return 0;
+err_cleanup_list:
+	cleanup_entry_list();
+	kset_unregister(esrt_kset);
+err_remove_group:
+	sysfs_remove_group(esrt_kobj, &esrt_attr_group);
+err_remove_esrt:
+	kobject_put(esrt_kobj);
+err:
+	memunmap(esrt);
+	esrt = NULL;
+	return error;
+}
+device_initcall(esrt_sysfs_init);
+
+/*
+MODULE_AUTHOR("Peter Jones <pjones@redhat.com>");
+MODULE_DESCRIPTION("EFI System Resource Table support");
+MODULE_LICENSE("GPL");
+*/
diff --git a/drivers/firmware/efi/fake_mem.c b/drivers/firmware/efi/fake_mem.c
new file mode 100644
index 000000000..6e0f34a38
--- /dev/null
+++ b/drivers/firmware/efi/fake_mem.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * fake_mem.c
+ *
+ * Copyright (C) 2015 FUJITSU LIMITED
+ * Author: Taku Izumi <izumi.taku@jp.fujitsu.com>
+ *
+ * This code introduces new boot option named "efi_fake_mem"
+ * By specifying this parameter, you can add arbitrary attribute to
+ * specific memory range by updating original (firmware provided) EFI
+ * memmap.
+ */
+
+#include <linux/kernel.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/types.h>
+#include <linux/sort.h>
+#include "fake_mem.h"
+
+struct efi_mem_range efi_fake_mems[EFI_MAX_FAKEMEM];
+int nr_fake_mem;
+
+static int __init cmp_fake_mem(const void *x1, const void *x2)
+{
+	const struct efi_mem_range *m1 = x1;
+	const struct efi_mem_range *m2 = x2;
+
+	if (m1->range.start < m2->range.start)
+		return -1;
+	if (m1->range.start > m2->range.start)
+		return 1;
+	return 0;
+}
+
+static void __init efi_fake_range(struct efi_mem_range *efi_range)
+{
+	struct efi_memory_map_data data = { 0 };
+	int new_nr_map = efi.memmap.nr_map;
+	efi_memory_desc_t *md;
+	void *new_memmap;
+
+	/* count up the number of EFI memory descriptor */
+	for_each_efi_memory_desc(md)
+		new_nr_map += efi_memmap_split_count(md, &efi_range->range);
+
+	/* allocate memory for new EFI memmap */
+	if (efi_memmap_alloc(new_nr_map, &data) != 0)
+		return;
+
+	/* create new EFI memmap */
+	new_memmap = early_memremap(data.phys_map, data.size);
+	if (!new_memmap) {
+		__efi_memmap_free(data.phys_map, data.size, data.flags);
+		return;
+	}
+
+	efi_memmap_insert(&efi.memmap, new_memmap, efi_range);
+
+	/* swap into new EFI memmap */
+	early_memunmap(new_memmap, data.size);
+
+	efi_memmap_install(&data);
+}
+
+void __init efi_fake_memmap(void)
+{
+	int i;
+
+	if (!efi_enabled(EFI_MEMMAP) || !nr_fake_mem)
+		return;
+
+	for (i = 0; i < nr_fake_mem; i++)
+		efi_fake_range(&efi_fake_mems[i]);
+
+	/* print new EFI memmap */
+	efi_print_memmap();
+}
+
+static int __init setup_fake_mem(char *p)
+{
+	u64 start = 0, mem_size = 0, attribute = 0;
+	int i;
+
+	if (!p)
+		return -EINVAL;
+
+	while (*p != '\0') {
+		mem_size = memparse(p, &p);
+		if (*p == '@')
+			start = memparse(p+1, &p);
+		else
+			break;
+
+		if (*p == ':')
+			attribute = simple_strtoull(p+1, &p, 0);
+		else
+			break;
+
+		if (nr_fake_mem >= EFI_MAX_FAKEMEM)
+			break;
+
+		efi_fake_mems[nr_fake_mem].range.start = start;
+		efi_fake_mems[nr_fake_mem].range.end = start + mem_size - 1;
+		efi_fake_mems[nr_fake_mem].attribute = attribute;
+		nr_fake_mem++;
+
+		if (*p == ',')
+			p++;
+	}
+
+	sort(efi_fake_mems, nr_fake_mem, sizeof(struct efi_mem_range),
+	     cmp_fake_mem, NULL);
+
+	for (i = 0; i < nr_fake_mem; i++)
+		pr_info("efi_fake_mem: add attr=0x%016llx to [mem 0x%016llx-0x%016llx]",
+			efi_fake_mems[i].attribute, efi_fake_mems[i].range.start,
+			efi_fake_mems[i].range.end);
+
+	return *p == '\0' ? 0 : -EINVAL;
+}
+
+early_param("efi_fake_mem", setup_fake_mem);
diff --git a/drivers/firmware/efi/fake_mem.h b/drivers/firmware/efi/fake_mem.h
new file mode 100644
index 000000000..d52791af4
--- /dev/null
+++ b/drivers/firmware/efi/fake_mem.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __EFI_FAKE_MEM_H__
+#define __EFI_FAKE_MEM_H__
+#include <asm/efi.h>
+
+#define EFI_MAX_FAKEMEM CONFIG_EFI_MAX_FAKE_MEM
+
+extern struct efi_mem_range efi_fake_mems[EFI_MAX_FAKEMEM];
+extern int nr_fake_mem;
+#endif /* __EFI_FAKE_MEM_H__ */
diff --git a/drivers/firmware/efi/fdtparams.c b/drivers/firmware/efi/fdtparams.c
new file mode 100644
index 000000000..e901f8564
--- /dev/null
+++ b/drivers/firmware/efi/fdtparams.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "efi: " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+
+#include <asm/unaligned.h>
+
+enum {
+	SYSTAB,
+	MMBASE,
+	MMSIZE,
+	DCSIZE,
+	DCVERS,
+
+	PARAMCOUNT
+};
+
+static __initconst const char name[][22] = {
+	[SYSTAB] = "System Table         ",
+	[MMBASE] = "MemMap Address       ",
+	[MMSIZE] = "MemMap Size          ",
+	[DCSIZE] = "MemMap Desc. Size    ",
+	[DCVERS] = "MemMap Desc. Version ",
+};
+
+static __initconst const struct {
+	const char	path[17];
+	const char	params[PARAMCOUNT][26];
+} dt_params[] = {
+	{
+#ifdef CONFIG_XEN    //  <-------17------>
+		.path = "/hypervisor/uefi",
+		.params = {
+			[SYSTAB] = "xen,uefi-system-table",
+			[MMBASE] = "xen,uefi-mmap-start",
+			[MMSIZE] = "xen,uefi-mmap-size",
+			[DCSIZE] = "xen,uefi-mmap-desc-size",
+			[DCVERS] = "xen,uefi-mmap-desc-ver",
+		}
+	}, {
+#endif
+		.path = "/chosen",
+		.params = {	//  <-----------26----------->
+			[SYSTAB] = "linux,uefi-system-table",
+			[MMBASE] = "linux,uefi-mmap-start",
+			[MMSIZE] = "linux,uefi-mmap-size",
+			[DCSIZE] = "linux,uefi-mmap-desc-size",
+			[DCVERS] = "linux,uefi-mmap-desc-ver",
+		}
+	}
+};
+
+static int __init efi_get_fdt_prop(const void *fdt, int node, const char *pname,
+				   const char *rname, void *var, int size)
+{
+	const void *prop;
+	int len;
+	u64 val;
+
+	prop = fdt_getprop(fdt, node, pname, &len);
+	if (!prop)
+		return 1;
+
+	val = (len == 4) ? (u64)be32_to_cpup(prop) : get_unaligned_be64(prop);
+
+	if (size == 8)
+		*(u64 *)var = val;
+	else
+		*(u32 *)var = (val < U32_MAX) ? val : U32_MAX; // saturate
+
+	if (efi_enabled(EFI_DBG))
+		pr_info("  %s: 0x%0*llx\n", rname, size * 2, val);
+
+	return 0;
+}
+
+u64 __init efi_get_fdt_params(struct efi_memory_map_data *mm)
+{
+	const void *fdt = initial_boot_params;
+	unsigned long systab;
+	int i, j, node;
+	struct {
+		void	*var;
+		int	size;
+	} target[] = {
+		[SYSTAB] = { &systab,		sizeof(systab) },
+		[MMBASE] = { &mm->phys_map,	sizeof(mm->phys_map) },
+		[MMSIZE] = { &mm->size,		sizeof(mm->size) },
+		[DCSIZE] = { &mm->desc_size,	sizeof(mm->desc_size) },
+		[DCVERS] = { &mm->desc_version,	sizeof(mm->desc_version) },
+	};
+
+	BUILD_BUG_ON(ARRAY_SIZE(target) != ARRAY_SIZE(name));
+	BUILD_BUG_ON(ARRAY_SIZE(target) != ARRAY_SIZE(dt_params[0].params));
+
+	if (!fdt)
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(dt_params); i++) {
+		node = fdt_path_offset(fdt, dt_params[i].path);
+		if (node < 0)
+			continue;
+
+		if (efi_enabled(EFI_DBG))
+			pr_info("Getting UEFI parameters from %s in DT:\n",
+				dt_params[i].path);
+
+		for (j = 0; j < ARRAY_SIZE(target); j++) {
+			const char *pname = dt_params[i].params[j];
+
+			if (!efi_get_fdt_prop(fdt, node, pname, name[j],
+					      target[j].var, target[j].size))
+				continue;
+			if (!j)
+				goto notfound;
+			pr_err("Can't find property '%s' in DT!\n", pname);
+			return 0;
+		}
+		return systab;
+	}
+notfound:
+	pr_info("UEFI not found.\n");
+	return 0;
+}
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
new file mode 100644
index 000000000..433e11dab
--- /dev/null
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# The stub may be linked into the kernel proper or into a separate boot binary,
+# but in either case, it executes before the kernel does (with MMU disabled) so
+# things like ftrace and stack-protector are likely to cause trouble if left
+# enabled, even if doing so doesn't break the build.
+#
+cflags-$(CONFIG_X86_32)		:= -march=i386
+cflags-$(CONFIG_X86_64)		:= -mcmodel=small
+cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ \
+				   -fPIC -fno-strict-aliasing -mno-red-zone \
+				   -mno-mmx -mno-sse -fshort-wchar \
+				   -Wno-pointer-sign \
+				   $(call cc-disable-warning, address-of-packed-member) \
+				   $(call cc-disable-warning, gnu) \
+				   -fno-asynchronous-unwind-tables \
+				   $(CLANG_FLAGS)
+
+# arm64 uses the full KBUILD_CFLAGS so it's necessary to explicitly
+# disable the stackleak plugin
+cflags-$(CONFIG_ARM64)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+				   -fpie $(DISABLE_STACKLEAK_PLUGIN) \
+				   $(call cc-option,-mbranch-protection=none)
+cflags-$(CONFIG_ARM)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+				   -fno-builtin -fpic \
+				   $(call cc-option,-mno-single-pic-base)
+cflags-$(CONFIG_RISCV)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
+				   -fpic
+
+cflags-$(CONFIG_EFI_GENERIC_STUB) += -I$(srctree)/scripts/dtc/libfdt
+
+KBUILD_CFLAGS			:= $(cflags-y) -Os -DDISABLE_BRANCH_PROFILING \
+				   -include $(srctree)/include/linux/hidden.h \
+				   -D__NO_FORTIFY \
+				   -ffreestanding \
+				   -fno-stack-protector \
+				   $(call cc-option,-fno-addrsig) \
+				   -D__DISABLE_EXPORTS
+
+#
+# struct randomization only makes sense for Linux internal types, which the EFI
+# stub code never touches, so let's turn off struct randomization for the stub
+# altogether
+#
+KBUILD_CFLAGS := $(filter-out $(RANDSTRUCT_CFLAGS), $(KBUILD_CFLAGS))
+
+# remove SCS flags from all objects in this directory
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+
+GCOV_PROFILE			:= n
+# Sanitizer runtimes are unavailable and cannot be linked here.
+KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
+UBSAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT			:= n
+
+lib-y				:= efi-stub-helper.o gop.o secureboot.o tpm.o \
+				   file.o mem.o random.o randomalloc.o pci.o \
+				   skip_spaces.o lib-cmdline.o lib-ctype.o \
+				   alignedmem.o relocate.o vsprintf.o
+
+# include the stub's generic dependencies from lib/ when building for ARM/arm64
+efi-deps-y := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+lib-$(CONFIG_EFI_GENERIC_STUB)	+= efi-stub.o fdt.o string.o \
+				   $(patsubst %.c,lib-%.o,$(efi-deps-y))
+
+lib-$(CONFIG_ARM)		+= arm32-stub.o
+lib-$(CONFIG_ARM64)		+= arm64-stub.o
+lib-$(CONFIG_X86)		+= x86-stub.o
+lib-$(CONFIG_RISCV)		+= riscv-stub.o
+CFLAGS_arm32-stub.o		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
+
+# Even when -mbranch-protection=none is set, Clang will generate a
+# .note.gnu.property for code-less object files (like lib/ctype.c),
+# so work around this by explicitly removing the unwanted section.
+# https://bugs.llvm.org/show_bug.cgi?id=46480
+STUBCOPY_FLAGS-y		+= --remove-section=.note.gnu.property
+
+#
+# For x86, bootloaders like systemd-boot or grub-efi do not zero-initialize the
+# .bss section, so the .bss section of the EFI stub needs to be included in the
+# .data section of the compressed kernel to ensure initialization. Rename the
+# .bss section here so it's easy to pick out in the linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_X86)	+= --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_X86_32)	:= R_386_32
+STUBCOPY_RELOC-$(CONFIG_X86_64)	:= R_X86_64_64
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub and .bss to .bss.efistub,
+# which are preserved explicitly by the decompressor linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub	\
+				   --rename-section .bss=.bss.efistub,load,alloc
+STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
+
+#
+# arm64 puts the stub in the kernel proper, which will unnecessarily retain all
+# code indefinitely unless it is annotated as __init/__initdata/__initconst etc.
+# So let's apply the __init annotations at the section level, by prefixing
+# the section names directly. This will ensure that even all the inline string
+# literals are covered.
+# The fact that the stub and the kernel proper are essentially the same binary
+# also means that we need to be extra careful to make sure that the stub does
+# not rely on any absolute symbol references, considering that the virtual
+# kernel mapping that the linker uses is not active yet when the stub is
+# executing. So build all C dependencies of the EFI stub into libstub, and do
+# a verification pass to see if any absolute relocations exist in any of the
+# object files.
+#
+extra-y				:= $(lib-y)
+lib-y				:= $(patsubst %.o,%.stub.o,$(lib-y))
+
+STUBCOPY_FLAGS-$(CONFIG_ARM64)	+= --prefix-alloc-sections=.init \
+				   --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_ARM64)	:= R_AARCH64_ABS
+
+# For RISC-V, we don't need anything special other than arm64. Keep all the
+# symbols in .init section and make sure that no absolute symbols references
+# doesn't exist.
+STUBCOPY_FLAGS-$(CONFIG_RISCV)	+= --prefix-alloc-sections=.init \
+				   --prefix-symbols=__efistub_
+STUBCOPY_RELOC-$(CONFIG_RISCV)	:= R_RISCV_HI20
+
+$(obj)/%.stub.o: $(obj)/%.o FORCE
+	$(call if_changed,stubcopy)
+
+#
+# Strip debug sections and some other sections that may legally contain
+# absolute relocations, so that we can inspect the remaining sections for
+# such relocations. If none are found, regenerate the output object, but
+# this time, use objcopy and leave all sections in place.
+#
+quiet_cmd_stubcopy = STUBCPY $@
+      cmd_stubcopy =							\
+	$(STRIP) --strip-debug -o $@ $<;				\
+	if $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y); then		\
+		echo "$@: absolute symbol references not allowed in the EFI stub" >&2; \
+		/bin/false;						\
+	fi;								\
+	$(OBJCOPY) $(STUBCOPY_FLAGS-y) $< $@
diff --git a/drivers/firmware/efi/libstub/alignedmem.c b/drivers/firmware/efi/libstub/alignedmem.c
new file mode 100644
index 000000000..1de9878dd
--- /dev/null
+++ b/drivers/firmware/efi/libstub/alignedmem.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/**
+ * efi_allocate_pages_aligned() - Allocate memory pages
+ * @size:	minimum number of bytes to allocate
+ * @addr:	On return the address of the first allocated page. The first
+ *		allocated page has alignment EFI_ALLOC_ALIGN which is an
+ *		architecture dependent multiple of the page size.
+ * @max:	the address that the last allocated memory page shall not
+ *		exceed
+ * @align:	minimum alignment of the base of the allocation
+ *
+ * Allocate pages as EFI_LOADER_DATA. The allocated pages are aligned according
+ * to @align, which should be >= EFI_ALLOC_ALIGN. The last allocated page will
+ * not exceed the address given by @max.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr,
+					unsigned long max, unsigned long align)
+{
+	efi_physical_addr_t alloc_addr;
+	efi_status_t status;
+	int slack;
+
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	alloc_addr = ALIGN_DOWN(max + 1, align) - 1;
+	size = round_up(size, EFI_ALLOC_ALIGN);
+	slack = align / EFI_PAGE_SIZE - 1;
+
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
+			     EFI_LOADER_DATA, size / EFI_PAGE_SIZE + slack,
+			     &alloc_addr);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	*addr = ALIGN((unsigned long)alloc_addr, align);
+
+	if (slack > 0) {
+		int l = (alloc_addr & (align - 1)) / EFI_PAGE_SIZE;
+
+		if (l) {
+			efi_bs_call(free_pages, alloc_addr, slack - l + 1);
+			slack = l - 1;
+		}
+		if (slack)
+			efi_bs_call(free_pages, *addr + size, slack);
+	}
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
new file mode 100644
index 000000000..4b5b2403b
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Linaro Ltd;  <roy.franz@linaro.org>
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+static efi_guid_t cpu_state_guid = LINUX_EFI_ARM_CPU_STATE_TABLE_GUID;
+
+struct efi_arm_entry_state *efi_entry_state;
+
+static void get_cpu_state(u32 *cpsr, u32 *sctlr)
+{
+	asm("mrs %0, cpsr" : "=r"(*cpsr));
+	if ((*cpsr & MODE_MASK) == HYP_MODE)
+		asm("mrc p15, 4, %0, c1, c0, 0" : "=r"(*sctlr));
+	else
+		asm("mrc p15, 0, %0, c1, c0, 0" : "=r"(*sctlr));
+}
+
+efi_status_t check_platform_features(void)
+{
+	efi_status_t status;
+	u32 cpsr, sctlr;
+	int block;
+
+	get_cpu_state(&cpsr, &sctlr);
+
+	efi_info("Entering in %s mode with MMU %sabled\n",
+		 ((cpsr & MODE_MASK) == HYP_MODE) ? "HYP" : "SVC",
+		 (sctlr & 1) ? "en" : "dis");
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+			     sizeof(*efi_entry_state),
+			     (void **)&efi_entry_state);
+	if (status != EFI_SUCCESS) {
+		efi_err("allocate_pool() failed\n");
+		return status;
+	}
+
+	efi_entry_state->cpsr_before_ebs = cpsr;
+	efi_entry_state->sctlr_before_ebs = sctlr;
+
+	status = efi_bs_call(install_configuration_table, &cpu_state_guid,
+			     efi_entry_state);
+	if (status != EFI_SUCCESS) {
+		efi_err("install_configuration_table() failed\n");
+		goto free_state;
+	}
+
+	/* non-LPAE kernels can run anywhere */
+	if (!IS_ENABLED(CONFIG_ARM_LPAE))
+		return EFI_SUCCESS;
+
+	/* LPAE kernels need compatible hardware */
+	block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0);
+	if (block < 5) {
+		efi_err("This LPAE kernel is not supported by your CPU\n");
+		status = EFI_UNSUPPORTED;
+		goto drop_table;
+	}
+	return EFI_SUCCESS;
+
+drop_table:
+	efi_bs_call(install_configuration_table, &cpu_state_guid, NULL);
+free_state:
+	efi_bs_call(free_pool, efi_entry_state);
+	return status;
+}
+
+void efi_handle_post_ebs_state(void)
+{
+	get_cpu_state(&efi_entry_state->cpsr_after_ebs,
+		      &efi_entry_state->sctlr_after_ebs);
+}
+
+static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID;
+
+struct screen_info *alloc_screen_info(void)
+{
+	struct screen_info *si;
+	efi_status_t status;
+
+	/*
+	 * Unlike on arm64, where we can directly fill out the screen_info
+	 * structure from the stub, we need to allocate a buffer to hold
+	 * its contents while we hand over to the kernel proper from the
+	 * decompressor.
+	 */
+	status = efi_bs_call(allocate_pool, EFI_RUNTIME_SERVICES_DATA,
+			     sizeof(*si), (void **)&si);
+
+	if (status != EFI_SUCCESS)
+		return NULL;
+
+	status = efi_bs_call(install_configuration_table,
+			     &screen_info_guid, si);
+	if (status == EFI_SUCCESS)
+		return si;
+
+	efi_bs_call(free_pool, si);
+	return NULL;
+}
+
+void free_screen_info(struct screen_info *si)
+{
+	if (!si)
+		return;
+
+	efi_bs_call(install_configuration_table, &screen_info_guid, NULL);
+	efi_bs_call(free_pool, si);
+}
+
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 efi_loaded_image_t *image)
+{
+	const int slack = TEXT_OFFSET - 5 * PAGE_SIZE;
+	int alloc_size = MAX_UNCOMP_KERNEL_SIZE + EFI_PHYS_ALIGN;
+	unsigned long alloc_base, kernel_base;
+	efi_status_t status;
+
+	/*
+	 * Allocate space for the decompressed kernel as low as possible.
+	 * The region should be 16 MiB aligned, but the first 'slack' bytes
+	 * are not used by Linux, so we allow those to be occupied by the
+	 * firmware.
+	 */
+	status = efi_low_alloc_above(alloc_size, EFI_PAGE_SIZE, &alloc_base, 0x0);
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to allocate memory for uncompressed kernel.\n");
+		return status;
+	}
+
+	if ((alloc_base % EFI_PHYS_ALIGN) > slack) {
+		/*
+		 * More than 'slack' bytes are already occupied at the base of
+		 * the allocation, so we need to advance to the next 16 MiB block.
+		 */
+		kernel_base = round_up(alloc_base, EFI_PHYS_ALIGN);
+		efi_info("Free memory starts at 0x%lx, setting kernel_base to 0x%lx\n",
+			 alloc_base, kernel_base);
+	} else {
+		kernel_base = round_down(alloc_base, EFI_PHYS_ALIGN);
+	}
+
+	*reserve_addr = kernel_base + slack;
+	*reserve_size = MAX_UNCOMP_KERNEL_SIZE;
+
+	/* now free the parts that we will not use */
+	if (*reserve_addr > alloc_base) {
+		efi_bs_call(free_pages, alloc_base,
+			    (*reserve_addr - alloc_base) / EFI_PAGE_SIZE);
+		alloc_size -= *reserve_addr - alloc_base;
+	}
+	efi_bs_call(free_pages, *reserve_addr + MAX_UNCOMP_KERNEL_SIZE,
+		    (alloc_size - MAX_UNCOMP_KERNEL_SIZE) / EFI_PAGE_SIZE);
+
+	*image_addr = kernel_base + TEXT_OFFSET;
+	*image_size = 0;
+
+	efi_debug("image addr == 0x%lx, reserve_addr == 0x%lx\n",
+		  *image_addr, *reserve_addr);
+
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
new file mode 100644
index 000000000..7f4bafcd9
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013, 2014 Linaro Ltd;  <roy.franz@linaro.org>
+ *
+ * This file implements the EFI boot stub for the arm64 kernel.
+ * Adapted from ARM version by Mark Salter <msalter@redhat.com>
+ */
+
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <asm/memory.h>
+#include <asm/sections.h>
+#include <asm/sysreg.h>
+
+#include "efistub.h"
+
+efi_status_t check_platform_features(void)
+{
+	u64 tg;
+
+	/* UEFI mandates support for 4 KB granularity, no need to check */
+	if (IS_ENABLED(CONFIG_ARM64_4K_PAGES))
+		return EFI_SUCCESS;
+
+	tg = (read_cpuid(ID_AA64MMFR0_EL1) >> ID_AA64MMFR0_TGRAN_SHIFT) & 0xf;
+	if (tg < ID_AA64MMFR0_TGRAN_SUPPORTED_MIN || tg > ID_AA64MMFR0_TGRAN_SUPPORTED_MAX) {
+		if (IS_ENABLED(CONFIG_ARM64_64K_PAGES))
+			efi_err("This 64 KB granular kernel is not supported by your CPU\n");
+		else
+			efi_err("This 16 KB granular kernel is not supported by your CPU\n");
+		return EFI_UNSUPPORTED;
+	}
+	return EFI_SUCCESS;
+}
+
+/*
+ * Distro versions of GRUB may ignore the BSS allocation entirely (i.e., fail
+ * to provide space, and fail to zero it). Check for this condition by double
+ * checking that the first and the last byte of the image are covered by the
+ * same EFI memory map entry.
+ */
+static bool check_image_region(u64 base, u64 size)
+{
+	unsigned long map_size, desc_size, buff_size;
+	efi_memory_desc_t *memory_map;
+	struct efi_boot_memmap map;
+	efi_status_t status;
+	bool ret = false;
+	int map_offset;
+
+	map.map =	&memory_map;
+	map.map_size =	&map_size;
+	map.desc_size =	&desc_size;
+	map.desc_ver =	NULL;
+	map.key_ptr =	NULL;
+	map.buff_size =	&buff_size;
+
+	status = efi_get_memory_map(&map);
+	if (status != EFI_SUCCESS)
+		return false;
+
+	for (map_offset = 0; map_offset < map_size; map_offset += desc_size) {
+		efi_memory_desc_t *md = (void *)memory_map + map_offset;
+		u64 end = md->phys_addr + md->num_pages * EFI_PAGE_SIZE;
+
+		/*
+		 * Find the region that covers base, and return whether
+		 * it covers base+size bytes.
+		 */
+		if (base >= md->phys_addr && base < end) {
+			ret = (base + size) <= end;
+			break;
+		}
+	}
+
+	efi_bs_call(free_pool, memory_map);
+
+	return ret;
+}
+
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 efi_loaded_image_t *image)
+{
+	efi_status_t status;
+	unsigned long kernel_size, kernel_memsize = 0;
+	u32 phys_seed = 0;
+
+	/*
+	 * Although relocatable kernels can fix up the misalignment with
+	 * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are
+	 * subtly out of sync with those recorded in the vmlinux when kaslr is
+	 * disabled but the image required relocation anyway. Therefore retain
+	 * 2M alignment if KASLR was explicitly disabled, even if it was not
+	 * going to be activated to begin with.
+	 */
+	u64 min_kimg_align = efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
+		if (!efi_nokaslr) {
+			status = efi_get_random_bytes(sizeof(phys_seed),
+						      (u8 *)&phys_seed);
+			if (status == EFI_NOT_FOUND) {
+				efi_info("EFI_RNG_PROTOCOL unavailable, KASLR will be disabled\n");
+				efi_nokaslr = true;
+			} else if (status != EFI_SUCCESS) {
+				efi_err("efi_get_random_bytes() failed (0x%lx), KASLR will be disabled\n",
+					status);
+				efi_nokaslr = true;
+			}
+		} else {
+			efi_info("KASLR disabled on kernel command line\n");
+		}
+	}
+
+	if (image->image_base != _text)
+		efi_err("FIRMWARE BUG: efi_loaded_image_t::image_base has bogus value\n");
+
+	if (!IS_ALIGNED((u64)_text, SEGMENT_ALIGN))
+		efi_err("FIRMWARE BUG: kernel image not aligned on %dk boundary\n",
+			SEGMENT_ALIGN >> 10);
+
+	kernel_size = _edata - _text;
+	kernel_memsize = kernel_size + (_end - _edata);
+	*reserve_size = kernel_memsize;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && phys_seed != 0) {
+		/*
+		 * If KASLR is enabled, and we have some randomness available,
+		 * locate the kernel at a randomized offset in physical memory.
+		 */
+		status = efi_random_alloc(*reserve_size, min_kimg_align,
+					  reserve_addr, phys_seed);
+	} else {
+		status = EFI_OUT_OF_RESOURCES;
+	}
+
+	if (status != EFI_SUCCESS) {
+		if (!check_image_region((u64)_text, kernel_memsize)) {
+			efi_err("FIRMWARE BUG: Image BSS overlaps adjacent EFI memory region\n");
+		} else if (IS_ALIGNED((u64)_text, min_kimg_align)) {
+			/*
+			 * Just execute from wherever we were loaded by the
+			 * UEFI PE/COFF loader if the alignment is suitable.
+			 */
+			*image_addr = (u64)_text;
+			*reserve_size = 0;
+			return EFI_SUCCESS;
+		}
+
+		status = efi_allocate_pages_aligned(*reserve_size, reserve_addr,
+						    ULONG_MAX, min_kimg_align);
+
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to relocate kernel\n");
+			*reserve_size = 0;
+			return status;
+		}
+	}
+
+	*image_addr = *reserve_addr;
+	memcpy((void *)*image_addr, _text, kernel_size);
+
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
new file mode 100644
index 000000000..aa8da0a49
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Helper functions used by the EFI stub on multiple
+ * architectures. This should be #included by the EFI stub
+ * implementation files.
+ *
+ * Copyright 2011 Intel Corporation; author Matt Fleming
+ */
+
+#include <stdarg.h>
+
+#include <linux/ctype.h>
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <asm/efi.h>
+#include <asm/setup.h>
+
+#include "efistub.h"
+
+bool efi_nochunk;
+bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE);
+bool efi_noinitrd;
+int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
+bool efi_novamap;
+
+static bool efi_nosoftreserve;
+static bool efi_disable_pci_dma = IS_ENABLED(CONFIG_EFI_DISABLE_PCI_DMA);
+
+bool __pure __efi_soft_reserve_enabled(void)
+{
+	return !efi_nosoftreserve;
+}
+
+/**
+ * efi_char16_puts() - Write a UCS-2 encoded string to the console
+ * @str:	UCS-2 encoded string
+ */
+void efi_char16_puts(efi_char16_t *str)
+{
+	efi_call_proto(efi_table_attr(efi_system_table, con_out),
+		       output_string, str);
+}
+
+static
+u32 utf8_to_utf32(const u8 **s8)
+{
+	u32 c32;
+	u8 c0, cx;
+	size_t clen, i;
+
+	c0 = cx = *(*s8)++;
+	/*
+	 * The position of the most-significant 0 bit gives us the length of
+	 * a multi-octet encoding.
+	 */
+	for (clen = 0; cx & 0x80; ++clen)
+		cx <<= 1;
+	/*
+	 * If the 0 bit is in position 8, this is a valid single-octet
+	 * encoding. If the 0 bit is in position 7 or positions 1-3, the
+	 * encoding is invalid.
+	 * In either case, we just return the first octet.
+	 */
+	if (clen < 2 || clen > 4)
+		return c0;
+	/* Get the bits from the first octet. */
+	c32 = cx >> clen--;
+	for (i = 0; i < clen; ++i) {
+		/* Trailing octets must have 10 in most significant bits. */
+		cx = (*s8)[i] ^ 0x80;
+		if (cx & 0xc0)
+			return c0;
+		c32 = (c32 << 6) | cx;
+	}
+	/*
+	 * Check for validity:
+	 * - The character must be in the Unicode range.
+	 * - It must not be a surrogate.
+	 * - It must be encoded using the correct number of octets.
+	 */
+	if (c32 > 0x10ffff ||
+	    (c32 & 0xf800) == 0xd800 ||
+	    clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000))
+		return c0;
+	*s8 += clen;
+	return c32;
+}
+
+/**
+ * efi_puts() - Write a UTF-8 encoded string to the console
+ * @str:	UTF-8 encoded string
+ */
+void efi_puts(const char *str)
+{
+	efi_char16_t buf[128];
+	size_t pos = 0, lim = ARRAY_SIZE(buf);
+	const u8 *s8 = (const u8 *)str;
+	u32 c32;
+
+	while (*s8) {
+		if (*s8 == '\n')
+			buf[pos++] = L'\r';
+		c32 = utf8_to_utf32(&s8);
+		if (c32 < 0x10000) {
+			/* Characters in plane 0 use a single word. */
+			buf[pos++] = c32;
+		} else {
+			/*
+			 * Characters in other planes encode into a surrogate
+			 * pair.
+			 */
+			buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10);
+			buf[pos++] = 0xdc00 + (c32 & 0x3ff);
+		}
+		if (*s8 == '\0' || pos >= lim - 2) {
+			buf[pos] = L'\0';
+			efi_char16_puts(buf);
+			pos = 0;
+		}
+	}
+}
+
+/**
+ * efi_printk() - Print a kernel message
+ * @fmt:	format string
+ *
+ * The first letter of the format string is used to determine the logging level
+ * of the message. If the level is less then the current EFI logging level, the
+ * message is suppressed. The message will be truncated to 255 bytes.
+ *
+ * Return:	number of printed characters
+ */
+int efi_printk(const char *fmt, ...)
+{
+	char printf_buf[256];
+	va_list args;
+	int printed;
+	int loglevel = printk_get_level(fmt);
+
+	switch (loglevel) {
+	case '0' ... '9':
+		loglevel -= '0';
+		break;
+	default:
+		/*
+		 * Use loglevel -1 for cases where we just want to print to
+		 * the screen.
+		 */
+		loglevel = -1;
+		break;
+	}
+
+	if (loglevel >= efi_loglevel)
+		return 0;
+
+	if (loglevel >= 0)
+		efi_puts("EFI stub: ");
+
+	fmt = printk_skip_level(fmt);
+
+	va_start(args, fmt);
+	printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args);
+	va_end(args);
+
+	efi_puts(printf_buf);
+	if (printed >= sizeof(printf_buf)) {
+		efi_puts("[Message truncated]\n");
+		return -1;
+	}
+
+	return printed;
+}
+
+/**
+ * efi_parse_options() - Parse EFI command line options
+ * @cmdline:	kernel command line
+ *
+ * Parse the ASCII string @cmdline for EFI options, denoted by the efi=
+ * option, e.g. efi=nochunk.
+ *
+ * It should be noted that efi= is parsed in two very different
+ * environments, first in the early boot environment of the EFI boot
+ * stub, and subsequently during the kernel boot.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_parse_options(char const *cmdline)
+{
+	size_t len;
+	efi_status_t status;
+	char *str, *buf;
+
+	if (!cmdline)
+		return EFI_SUCCESS;
+
+	len = strnlen(cmdline, COMMAND_LINE_SIZE - 1) + 1;
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, len, (void **)&buf);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	memcpy(buf, cmdline, len - 1);
+	buf[len - 1] = '\0';
+	str = skip_spaces(buf);
+
+	while (*str) {
+		char *param, *val;
+
+		str = next_arg(str, &param, &val);
+		if (!val && !strcmp(param, "--"))
+			break;
+
+		if (!strcmp(param, "nokaslr")) {
+			efi_nokaslr = true;
+		} else if (!strcmp(param, "quiet")) {
+			efi_loglevel = CONSOLE_LOGLEVEL_QUIET;
+		} else if (!strcmp(param, "noinitrd")) {
+			efi_noinitrd = true;
+		} else if (!strcmp(param, "efi") && val) {
+			efi_nochunk = parse_option_str(val, "nochunk");
+			efi_novamap = parse_option_str(val, "novamap");
+
+			efi_nosoftreserve = IS_ENABLED(CONFIG_EFI_SOFT_RESERVE) &&
+					    parse_option_str(val, "nosoftreserve");
+
+			if (parse_option_str(val, "disable_early_pci_dma"))
+				efi_disable_pci_dma = true;
+			if (parse_option_str(val, "no_disable_early_pci_dma"))
+				efi_disable_pci_dma = false;
+			if (parse_option_str(val, "debug"))
+				efi_loglevel = CONSOLE_LOGLEVEL_DEBUG;
+		} else if (!strcmp(param, "video") &&
+			   val && strstarts(val, "efifb:")) {
+			efi_parse_option_graphics(val + strlen("efifb:"));
+		}
+	}
+	efi_bs_call(free_pool, buf);
+	return EFI_SUCCESS;
+}
+
+/*
+ * The EFI_LOAD_OPTION descriptor has the following layout:
+ *	u32 Attributes;
+ *	u16 FilePathListLength;
+ *	u16 Description[];
+ *	efi_device_path_protocol_t FilePathList[];
+ *	u8 OptionalData[];
+ *
+ * This function validates and unpacks the variable-size data fields.
+ */
+static
+bool efi_load_option_unpack(efi_load_option_unpacked_t *dest,
+			    const efi_load_option_t *src, size_t size)
+{
+	const void *pos;
+	u16 c;
+	efi_device_path_protocol_t header;
+	const efi_char16_t *description;
+	const efi_device_path_protocol_t *file_path_list;
+
+	if (size < offsetof(efi_load_option_t, variable_data))
+		return false;
+	pos = src->variable_data;
+	size -= offsetof(efi_load_option_t, variable_data);
+
+	if ((src->attributes & ~EFI_LOAD_OPTION_MASK) != 0)
+		return false;
+
+	/* Scan description. */
+	description = pos;
+	do {
+		if (size < sizeof(c))
+			return false;
+		c = *(const u16 *)pos;
+		pos += sizeof(c);
+		size -= sizeof(c);
+	} while (c != L'\0');
+
+	/* Scan file_path_list. */
+	file_path_list = pos;
+	do {
+		if (size < sizeof(header))
+			return false;
+		header = *(const efi_device_path_protocol_t *)pos;
+		if (header.length < sizeof(header))
+			return false;
+		if (size < header.length)
+			return false;
+		pos += header.length;
+		size -= header.length;
+	} while ((header.type != EFI_DEV_END_PATH && header.type != EFI_DEV_END_PATH2) ||
+		 (header.sub_type != EFI_DEV_END_ENTIRE));
+	if (pos != (const void *)file_path_list + src->file_path_list_length)
+		return false;
+
+	dest->attributes = src->attributes;
+	dest->file_path_list_length = src->file_path_list_length;
+	dest->description = description;
+	dest->file_path_list = file_path_list;
+	dest->optional_data_size = size;
+	dest->optional_data = size ? pos : NULL;
+
+	return true;
+}
+
+/*
+ * At least some versions of Dell firmware pass the entire contents of the
+ * Boot#### variable, i.e. the EFI_LOAD_OPTION descriptor, rather than just the
+ * OptionalData field.
+ *
+ * Detect this case and extract OptionalData.
+ */
+void efi_apply_loadoptions_quirk(const void **load_options, int *load_options_size)
+{
+	const efi_load_option_t *load_option = *load_options;
+	efi_load_option_unpacked_t load_option_unpacked;
+
+	if (!IS_ENABLED(CONFIG_X86))
+		return;
+	if (!load_option)
+		return;
+	if (*load_options_size < sizeof(*load_option))
+		return;
+	if ((load_option->attributes & ~EFI_LOAD_OPTION_BOOT_MASK) != 0)
+		return;
+
+	if (!efi_load_option_unpack(&load_option_unpacked, load_option, *load_options_size))
+		return;
+
+	efi_warn_once(FW_BUG "LoadOptions is an EFI_LOAD_OPTION descriptor\n");
+	efi_warn_once(FW_BUG "Using OptionalData as a workaround\n");
+
+	*load_options = load_option_unpacked.optional_data;
+	*load_options_size = load_option_unpacked.optional_data_size;
+}
+
+/*
+ * Convert the unicode UEFI command line to ASCII to pass to kernel.
+ * Size of memory allocated return in *cmd_line_len.
+ * Returns NULL on error.
+ */
+char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len)
+{
+	const u16 *s2;
+	unsigned long cmdline_addr = 0;
+	int options_chars = efi_table_attr(image, load_options_size);
+	const u16 *options = efi_table_attr(image, load_options);
+	int options_bytes = 0, safe_options_bytes = 0;  /* UTF-8 bytes */
+	bool in_quote = false;
+	efi_status_t status;
+
+	efi_apply_loadoptions_quirk((const void **)&options, &options_chars);
+	options_chars /= sizeof(*options);
+
+	if (options) {
+		s2 = options;
+		while (options_bytes < COMMAND_LINE_SIZE && options_chars--) {
+			u16 c = *s2++;
+
+			if (c < 0x80) {
+				if (c == L'\0' || c == L'\n')
+					break;
+				if (c == L'"')
+					in_quote = !in_quote;
+				else if (!in_quote && isspace((char)c))
+					safe_options_bytes = options_bytes;
+
+				options_bytes++;
+				continue;
+			}
+
+			/*
+			 * Get the number of UTF-8 bytes corresponding to a
+			 * UTF-16 character.
+			 * The first part handles everything in the BMP.
+			 */
+			options_bytes += 2 + (c >= 0x800);
+			/*
+			 * Add one more byte for valid surrogate pairs. Invalid
+			 * surrogates will be replaced with 0xfffd and take up
+			 * only 3 bytes.
+			 */
+			if ((c & 0xfc00) == 0xd800) {
+				/*
+				 * If the very last word is a high surrogate,
+				 * we must ignore it since we can't access the
+				 * low surrogate.
+				 */
+				if (!options_chars) {
+					options_bytes -= 3;
+				} else if ((*s2 & 0xfc00) == 0xdc00) {
+					options_bytes++;
+					options_chars--;
+					s2++;
+				}
+			}
+		}
+		if (options_bytes >= COMMAND_LINE_SIZE) {
+			options_bytes = safe_options_bytes;
+			efi_err("Command line is too long: truncated to %d bytes\n",
+				options_bytes);
+		}
+	}
+
+	options_bytes++;	/* NUL termination */
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, options_bytes,
+			     (void **)&cmdline_addr);
+	if (status != EFI_SUCCESS)
+		return NULL;
+
+	snprintf((char *)cmdline_addr, options_bytes, "%.*ls",
+		 options_bytes - 1, options);
+
+	*cmd_line_len = options_bytes;
+	return (char *)cmdline_addr;
+}
+
+/**
+ * efi_exit_boot_services() - Exit boot services
+ * @handle:	handle of the exiting image
+ * @map:	pointer to receive the memory map
+ * @priv:	argument to be passed to @priv_func
+ * @priv_func:	function to process the memory map before exiting boot services
+ *
+ * Handle calling ExitBootServices according to the requirements set out by the
+ * spec.  Obtains the current memory map, and returns that info after calling
+ * ExitBootServices.  The client must specify a function to perform any
+ * processing of the memory map data prior to ExitBootServices.  A client
+ * specific structure may be passed to the function via priv.  The client
+ * function may be called multiple times.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_exit_boot_services(void *handle,
+				    struct efi_boot_memmap *map,
+				    void *priv,
+				    efi_exit_boot_map_processing priv_func)
+{
+	efi_status_t status;
+
+	status = efi_get_memory_map(map);
+
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	status = priv_func(map, priv);
+	if (status != EFI_SUCCESS)
+		goto free_map;
+
+	if (efi_disable_pci_dma)
+		efi_pci_disable_bridge_busmaster();
+
+	status = efi_bs_call(exit_boot_services, handle, *map->key_ptr);
+
+	if (status == EFI_INVALID_PARAMETER) {
+		/*
+		 * The memory map changed between efi_get_memory_map() and
+		 * exit_boot_services().  Per the UEFI Spec v2.6, Section 6.4:
+		 * EFI_BOOT_SERVICES.ExitBootServices we need to get the
+		 * updated map, and try again.  The spec implies one retry
+		 * should be sufficent, which is confirmed against the EDK2
+		 * implementation.  Per the spec, we can only invoke
+		 * get_memory_map() and exit_boot_services() - we cannot alloc
+		 * so efi_get_memory_map() cannot be used, and we must reuse
+		 * the buffer.  For all practical purposes, the headroom in the
+		 * buffer should account for any changes in the map so the call
+		 * to get_memory_map() is expected to succeed here.
+		 */
+		*map->map_size = *map->buff_size;
+		status = efi_bs_call(get_memory_map,
+				     map->map_size,
+				     *map->map,
+				     map->key_ptr,
+				     map->desc_size,
+				     map->desc_ver);
+
+		/* exit_boot_services() was called, thus cannot free */
+		if (status != EFI_SUCCESS)
+			goto fail;
+
+		status = priv_func(map, priv);
+		/* exit_boot_services() was called, thus cannot free */
+		if (status != EFI_SUCCESS)
+			goto fail;
+
+		status = efi_bs_call(exit_boot_services, handle, *map->key_ptr);
+	}
+
+	/* exit_boot_services() was called, thus cannot free */
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	return EFI_SUCCESS;
+
+free_map:
+	efi_bs_call(free_pool, *map->map);
+fail:
+	return status;
+}
+
+/**
+ * get_efi_config_table() - retrieve UEFI configuration table
+ * @guid:	GUID of the configuration table to be retrieved
+ * Return:	pointer to the configuration table or NULL
+ */
+void *get_efi_config_table(efi_guid_t guid)
+{
+	unsigned long tables = efi_table_attr(efi_system_table, tables);
+	int nr_tables = efi_table_attr(efi_system_table, nr_tables);
+	int i;
+
+	for (i = 0; i < nr_tables; i++) {
+		efi_config_table_t *t = (void *)tables;
+
+		if (efi_guidcmp(t->guid, guid) == 0)
+			return efi_table_attr(t, table);
+
+		tables += efi_is_native() ? sizeof(efi_config_table_t)
+					  : sizeof(efi_config_table_32_t);
+	}
+	return NULL;
+}
+
+/*
+ * The LINUX_EFI_INITRD_MEDIA_GUID vendor media device path below provides a way
+ * for the firmware or bootloader to expose the initrd data directly to the stub
+ * via the trivial LoadFile2 protocol, which is defined in the UEFI spec, and is
+ * very easy to implement. It is a simple Linux initrd specific conduit between
+ * kernel and firmware, allowing us to put the EFI stub (being part of the
+ * kernel) in charge of where and when to load the initrd, while leaving it up
+ * to the firmware to decide whether it needs to expose its filesystem hierarchy
+ * via EFI protocols.
+ */
+static const struct {
+	struct efi_vendor_dev_path	vendor;
+	struct efi_generic_dev_path	end;
+} __packed initrd_dev_path = {
+	{
+		{
+			EFI_DEV_MEDIA,
+			EFI_DEV_MEDIA_VENDOR,
+			sizeof(struct efi_vendor_dev_path),
+		},
+		LINUX_EFI_INITRD_MEDIA_GUID
+	}, {
+		EFI_DEV_END_PATH,
+		EFI_DEV_END_ENTIRE,
+		sizeof(struct efi_generic_dev_path)
+	}
+};
+
+/**
+ * efi_load_initrd_dev_path() - load the initrd from the Linux initrd device path
+ * @load_addr:	pointer to store the address where the initrd was loaded
+ * @load_size:	pointer to store the size of the loaded initrd
+ * @max:	upper limit for the initrd memory allocation
+ *
+ * Return:
+ * * %EFI_SUCCESS if the initrd was loaded successfully, in which
+ *   case @load_addr and @load_size are assigned accordingly
+ * * %EFI_NOT_FOUND if no LoadFile2 protocol exists on the initrd device path
+ * * %EFI_INVALID_PARAMETER if load_addr == NULL or load_size == NULL
+ * * %EFI_OUT_OF_RESOURCES if memory allocation failed
+ * * %EFI_LOAD_ERROR in all other cases
+ */
+static
+efi_status_t efi_load_initrd_dev_path(unsigned long *load_addr,
+				      unsigned long *load_size,
+				      unsigned long max)
+{
+	efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
+	efi_device_path_protocol_t *dp;
+	efi_load_file2_protocol_t *lf2;
+	unsigned long initrd_addr;
+	unsigned long initrd_size;
+	efi_handle_t handle;
+	efi_status_t status;
+
+	dp = (efi_device_path_protocol_t *)&initrd_dev_path;
+	status = efi_bs_call(locate_device_path, &lf2_proto_guid, &dp, &handle);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(handle_protocol, handle, &lf2_proto_guid,
+			     (void **)&lf2);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_call_proto(lf2, load_file, dp, false, &initrd_size, NULL);
+	if (status != EFI_BUFFER_TOO_SMALL)
+		return EFI_LOAD_ERROR;
+
+	status = efi_allocate_pages(initrd_size, &initrd_addr, max);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_call_proto(lf2, load_file, dp, false, &initrd_size,
+				(void *)initrd_addr);
+	if (status != EFI_SUCCESS) {
+		efi_free(initrd_size, initrd_addr);
+		return EFI_LOAD_ERROR;
+	}
+
+	*load_addr = initrd_addr;
+	*load_size = initrd_size;
+	return EFI_SUCCESS;
+}
+
+static
+efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image,
+				     unsigned long *load_addr,
+				     unsigned long *load_size,
+				     unsigned long soft_limit,
+				     unsigned long hard_limit)
+{
+	if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER) ||
+	    (IS_ENABLED(CONFIG_X86) && (!efi_is_native() || image == NULL))) {
+		*load_addr = *load_size = 0;
+		return EFI_SUCCESS;
+	}
+
+	return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
+				    soft_limit, hard_limit,
+				    load_addr, load_size);
+}
+
+/**
+ * efi_load_initrd() - Load initial RAM disk
+ * @image:	EFI loaded image protocol
+ * @load_addr:	pointer to loaded initrd
+ * @load_size:	size of loaded initrd
+ * @soft_limit:	preferred size of allocated memory for loading the initrd
+ * @hard_limit:	minimum size of allocated memory
+ *
+ * Return:	status code
+ */
+efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+			     unsigned long *load_addr,
+			     unsigned long *load_size,
+			     unsigned long soft_limit,
+			     unsigned long hard_limit)
+{
+	efi_status_t status;
+
+	if (!load_addr || !load_size)
+		return EFI_INVALID_PARAMETER;
+
+	status = efi_load_initrd_dev_path(load_addr, load_size, hard_limit);
+	if (status == EFI_SUCCESS) {
+		efi_info("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
+	} else if (status == EFI_NOT_FOUND) {
+		status = efi_load_initrd_cmdline(image, load_addr, load_size,
+						 soft_limit, hard_limit);
+		if (status == EFI_SUCCESS && *load_size > 0)
+			efi_info("Loaded initrd from command line option\n");
+	}
+
+	return status;
+}
+
+/**
+ * efi_wait_for_key() - Wait for key stroke
+ * @usec:	number of microseconds to wait for key stroke
+ * @key:	key entered
+ *
+ * Wait for up to @usec microseconds for a key stroke.
+ *
+ * Return:	status code, EFI_SUCCESS if key received
+ */
+efi_status_t efi_wait_for_key(unsigned long usec, efi_input_key_t *key)
+{
+	efi_event_t events[2], timer;
+	unsigned long index;
+	efi_simple_text_input_protocol_t *con_in;
+	efi_status_t status;
+
+	con_in = efi_table_attr(efi_system_table, con_in);
+	if (!con_in)
+		return EFI_UNSUPPORTED;
+	efi_set_event_at(events, 0, efi_table_attr(con_in, wait_for_key));
+
+	status = efi_bs_call(create_event, EFI_EVT_TIMER, 0, NULL, NULL, &timer);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(set_timer, timer, EfiTimerRelative,
+			     EFI_100NSEC_PER_USEC * usec);
+	if (status != EFI_SUCCESS)
+		return status;
+	efi_set_event_at(events, 1, timer);
+
+	status = efi_bs_call(wait_for_event, 2, events, &index);
+	if (status == EFI_SUCCESS) {
+		if (index == 0)
+			status = efi_call_proto(con_in, read_keystroke, key);
+		else
+			status = EFI_TIMEOUT;
+	}
+
+	efi_bs_call(close_event, timer);
+
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
new file mode 100644
index 000000000..0ab439c53
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * EFI stub implementation that is shared by arm and arm64 architectures.
+ * This should be #included by the EFI stub implementation files.
+ *
+ * Copyright (C) 2013,2014 Linaro Limited
+ *     Roy Franz <roy.franz@linaro.org
+ * Copyright (C) 2013 Red Hat, Inc.
+ *     Mark Salter <msalter@redhat.com>
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/*
+ * This is the base address at which to start allocating virtual memory ranges
+ * for UEFI Runtime Services.
+ *
+ * For ARM/ARM64:
+ * This is in the low TTBR0 range so that we can use
+ * any allocation we choose, and eliminate the risk of a conflict after kexec.
+ * The value chosen is the largest non-zero power of 2 suitable for this purpose
+ * both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
+ * be mapped efficiently.
+ * Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
+ * map everything below 1 GB. (512 MB is a reasonable upper bound for the
+ * entire footprint of the UEFI runtime services memory regions)
+ *
+ * For RISC-V:
+ * There is no specific reason for which, this address (512MB) can't be used
+ * EFI runtime virtual address for RISC-V. It also helps to use EFI runtime
+ * services on both RV32/RV64. Keep the same runtime virtual address for RISC-V
+ * as well to minimize the code churn.
+ */
+#define EFI_RT_VIRTUAL_BASE	SZ_512M
+#define EFI_RT_VIRTUAL_SIZE	SZ_512M
+
+#ifdef CONFIG_ARM64
+# define EFI_RT_VIRTUAL_LIMIT	DEFAULT_MAP_WINDOW_64
+#else
+# define EFI_RT_VIRTUAL_LIMIT	TASK_SIZE
+#endif
+
+static u64 virtmap_base = EFI_RT_VIRTUAL_BASE;
+static bool flat_va_mapping;
+
+const efi_system_table_t *efi_system_table;
+
+static struct screen_info *setup_graphics(void)
+{
+	efi_guid_t gop_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
+	efi_status_t status;
+	unsigned long size;
+	void **gop_handle = NULL;
+	struct screen_info *si = NULL;
+
+	size = 0;
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+			     &gop_proto, NULL, &size, gop_handle);
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		si = alloc_screen_info();
+		if (!si)
+			return NULL;
+		status = efi_setup_gop(si, &gop_proto, size);
+		if (status != EFI_SUCCESS) {
+			free_screen_info(si);
+			return NULL;
+		}
+	}
+	return si;
+}
+
+static void install_memreserve_table(void)
+{
+	struct linux_efi_memreserve *rsv;
+	efi_guid_t memreserve_table_guid = LINUX_EFI_MEMRESERVE_TABLE_GUID;
+	efi_status_t status;
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, sizeof(*rsv),
+			     (void **)&rsv);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate memreserve entry!\n");
+		return;
+	}
+
+	rsv->next = 0;
+	rsv->size = 0;
+	atomic_set(&rsv->count, 0);
+
+	status = efi_bs_call(install_configuration_table,
+			     &memreserve_table_guid, rsv);
+	if (status != EFI_SUCCESS)
+		efi_err("Failed to install memreserve config table!\n");
+}
+
+static u32 get_supported_rt_services(void)
+{
+	const efi_rt_properties_table_t *rt_prop_table;
+	u32 supported = EFI_RT_SUPPORTED_ALL;
+
+	rt_prop_table = get_efi_config_table(EFI_RT_PROPERTIES_TABLE_GUID);
+	if (rt_prop_table)
+		supported &= rt_prop_table->runtime_services_supported;
+
+	return supported;
+}
+
+/*
+ * EFI entry point for the arm/arm64 EFI stubs.  This is the entrypoint
+ * that is described in the PE/COFF header.  Most of the code is the same
+ * for both archictectures, with the arch-specific code provided in the
+ * handle_kernel_image() function.
+ */
+efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
+				   efi_system_table_t *sys_table_arg)
+{
+	efi_loaded_image_t *image;
+	efi_status_t status;
+	unsigned long image_addr;
+	unsigned long image_size = 0;
+	/* addr/point and size pairs for memory management*/
+	unsigned long initrd_addr = 0;
+	unsigned long initrd_size = 0;
+	unsigned long fdt_addr = 0;  /* Original DTB */
+	unsigned long fdt_size = 0;
+	char *cmdline_ptr = NULL;
+	int cmdline_size = 0;
+	efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
+	unsigned long reserve_addr = 0;
+	unsigned long reserve_size = 0;
+	enum efi_secureboot_mode secure_boot;
+	struct screen_info *si;
+	efi_properties_table_t *prop_tbl;
+	unsigned long max_addr;
+
+	efi_system_table = sys_table_arg;
+
+	/* Check if we were booted by the EFI firmware */
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
+		status = EFI_INVALID_PARAMETER;
+		goto fail;
+	}
+
+	status = check_platform_features();
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	/*
+	 * Get a handle to the loaded image protocol.  This is used to get
+	 * information about the running image, such as size and the command
+	 * line.
+	 */
+	status = efi_system_table->boottime->handle_protocol(handle,
+					&loaded_image_proto, (void *)&image);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to get loaded image protocol\n");
+		goto fail;
+	}
+
+	/*
+	 * Get the command line from EFI, using the LOADED_IMAGE
+	 * protocol. We are going to copy the command line into the
+	 * device tree, so this can be allocated anywhere.
+	 */
+	cmdline_ptr = efi_convert_cmdline(image, &cmdline_size);
+	if (!cmdline_ptr) {
+		efi_err("getting command line via LOADED_IMAGE_PROTOCOL\n");
+		status = EFI_OUT_OF_RESOURCES;
+		goto fail;
+	}
+
+	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
+	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
+	    cmdline_size == 0) {
+		status = efi_parse_options(CONFIG_CMDLINE);
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to parse options\n");
+			goto fail_free_cmdline;
+		}
+	}
+
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && cmdline_size > 0) {
+		status = efi_parse_options(cmdline_ptr);
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to parse options\n");
+			goto fail_free_cmdline;
+		}
+	}
+
+	efi_info("Booting Linux Kernel...\n");
+
+	si = setup_graphics();
+
+	status = handle_kernel_image(&image_addr, &image_size,
+				     &reserve_addr,
+				     &reserve_size,
+				     image);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to relocate kernel\n");
+		goto fail_free_screeninfo;
+	}
+
+	efi_retrieve_tpm2_eventlog();
+
+	/* Ask the firmware to clear memory on unclean shutdown */
+	efi_enable_reset_attack_mitigation();
+
+	secure_boot = efi_get_secureboot();
+
+	/*
+	 * Unauthenticated device tree data is a security hazard, so ignore
+	 * 'dtb=' unless UEFI Secure Boot is disabled.  We assume that secure
+	 * boot is enabled if we can't determine its state.
+	 */
+	if (!IS_ENABLED(CONFIG_EFI_ARMSTUB_DTB_LOADER) ||
+	     secure_boot != efi_secureboot_mode_disabled) {
+		if (strstr(cmdline_ptr, "dtb="))
+			efi_err("Ignoring DTB from command line.\n");
+	} else {
+		status = efi_load_dtb(image, &fdt_addr, &fdt_size);
+
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to load device tree!\n");
+			goto fail_free_image;
+		}
+	}
+
+	if (fdt_addr) {
+		efi_info("Using DTB from command line\n");
+	} else {
+		/* Look for a device tree configuration table entry. */
+		fdt_addr = (uintptr_t)get_fdt(&fdt_size);
+		if (fdt_addr)
+			efi_info("Using DTB from configuration table\n");
+	}
+
+	if (!fdt_addr)
+		efi_info("Generating empty DTB\n");
+
+	if (!efi_noinitrd) {
+		max_addr = efi_get_max_initrd_addr(image_addr);
+		status = efi_load_initrd(image, &initrd_addr, &initrd_size,
+					 ULONG_MAX, max_addr);
+		if (status != EFI_SUCCESS)
+			efi_err("Failed to load initrd!\n");
+	}
+
+	efi_random_get_seed();
+
+	/*
+	 * If the NX PE data feature is enabled in the properties table, we
+	 * should take care not to create a virtual mapping that changes the
+	 * relative placement of runtime services code and data regions, as
+	 * they may belong to the same PE/COFF executable image in memory.
+	 * The easiest way to achieve that is to simply use a 1:1 mapping.
+	 */
+	prop_tbl = get_efi_config_table(EFI_PROPERTIES_TABLE_GUID);
+	flat_va_mapping = prop_tbl &&
+			  (prop_tbl->memory_protection_attribute &
+			   EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA);
+
+	/* force efi_novamap if SetVirtualAddressMap() is unsupported */
+	efi_novamap |= !(get_supported_rt_services() &
+			 EFI_RT_SUPPORTED_SET_VIRTUAL_ADDRESS_MAP);
+
+	/* hibernation expects the runtime regions to stay in the same place */
+	if (!IS_ENABLED(CONFIG_HIBERNATION) && !efi_nokaslr && !flat_va_mapping) {
+		/*
+		 * Randomize the base of the UEFI runtime services region.
+		 * Preserve the 2 MB alignment of the region by taking a
+		 * shift of 21 bit positions into account when scaling
+		 * the headroom value using a 32-bit random value.
+		 */
+		static const u64 headroom = EFI_RT_VIRTUAL_LIMIT -
+					    EFI_RT_VIRTUAL_BASE -
+					    EFI_RT_VIRTUAL_SIZE;
+		u32 rnd;
+
+		status = efi_get_random_bytes(sizeof(rnd), (u8 *)&rnd);
+		if (status == EFI_SUCCESS) {
+			virtmap_base = EFI_RT_VIRTUAL_BASE +
+				       (((headroom >> 21) * rnd) >> (32 - 21));
+		}
+	}
+
+	install_memreserve_table();
+
+	status = allocate_new_fdt_and_exit_boot(handle, &fdt_addr,
+						efi_get_max_fdt_addr(image_addr),
+						initrd_addr, initrd_size,
+						cmdline_ptr, fdt_addr, fdt_size);
+	if (status != EFI_SUCCESS)
+		goto fail_free_initrd;
+
+	if (IS_ENABLED(CONFIG_ARM))
+		efi_handle_post_ebs_state();
+
+	efi_enter_kernel(image_addr, fdt_addr, fdt_totalsize((void *)fdt_addr));
+	/* not reached */
+
+fail_free_initrd:
+	efi_err("Failed to update FDT and exit boot services\n");
+
+	efi_free(initrd_size, initrd_addr);
+	efi_free(fdt_size, fdt_addr);
+
+fail_free_image:
+	efi_free(image_size, image_addr);
+	efi_free(reserve_size, reserve_addr);
+fail_free_screeninfo:
+	free_screen_info(si);
+fail_free_cmdline:
+	efi_bs_call(free_pool, cmdline_ptr);
+fail:
+	return status;
+}
+
+/*
+ * efi_get_virtmap() - create a virtual mapping for the EFI memory map
+ *
+ * This function populates the virt_addr fields of all memory region descriptors
+ * in @memory_map whose EFI_MEMORY_RUNTIME attribute is set. Those descriptors
+ * are also copied to @runtime_map, and their total count is returned in @count.
+ */
+void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
+		     unsigned long desc_size, efi_memory_desc_t *runtime_map,
+		     int *count)
+{
+	u64 efi_virt_base = virtmap_base;
+	efi_memory_desc_t *in, *out = runtime_map;
+	int l;
+
+	for (l = 0; l < map_size; l += desc_size) {
+		u64 paddr, size;
+
+		in = (void *)memory_map + l;
+		if (!(in->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+
+		paddr = in->phys_addr;
+		size = in->num_pages * EFI_PAGE_SIZE;
+
+		in->virt_addr = in->phys_addr;
+		if (efi_novamap) {
+			continue;
+		}
+
+		/*
+		 * Make the mapping compatible with 64k pages: this allows
+		 * a 4k page size kernel to kexec a 64k page size kernel and
+		 * vice versa.
+		 */
+		if (!flat_va_mapping) {
+
+			paddr = round_down(in->phys_addr, SZ_64K);
+			size += in->phys_addr - paddr;
+
+			/*
+			 * Avoid wasting memory on PTEs by choosing a virtual
+			 * base that is compatible with section mappings if this
+			 * region has the appropriate size and physical
+			 * alignment. (Sections are 2 MB on 4k granule kernels)
+			 */
+			if (IS_ALIGNED(in->phys_addr, SZ_2M) && size >= SZ_2M)
+				efi_virt_base = round_up(efi_virt_base, SZ_2M);
+			else
+				efi_virt_base = round_up(efi_virt_base, SZ_64K);
+
+			in->virt_addr += efi_virt_base - paddr;
+			efi_virt_base += size;
+		}
+
+		memcpy(out, in, desc_size);
+		out = (void *)out + desc_size;
+		++*count;
+	}
+}
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
new file mode 100644
index 000000000..c5e0c6e99
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -0,0 +1,853 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DRIVERS_FIRMWARE_EFI_EFISTUB_H
+#define _DRIVERS_FIRMWARE_EFI_EFISTUB_H
+
+#include <linux/compiler.h>
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/kern_levels.h>
+#include <linux/types.h>
+#include <asm/efi.h>
+
+/*
+ * __init annotations should not be used in the EFI stub, since the code is
+ * either included in the decompressor (x86, ARM) where they have no effect,
+ * or the whole stub is __init annotated at the section level (arm64), by
+ * renaming the sections, in which case the __init annotation will be
+ * redundant, and will result in section names like .init.init.text, and our
+ * linker script does not expect that.
+ */
+#undef __init
+
+/*
+ * Allow the platform to override the allocation granularity: this allows
+ * systems that have the capability to run with a larger page size to deal
+ * with the allocations for initrd and fdt more efficiently.
+ */
+#ifndef EFI_ALLOC_ALIGN
+#define EFI_ALLOC_ALIGN		EFI_PAGE_SIZE
+#endif
+
+extern bool efi_nochunk;
+extern bool efi_nokaslr;
+extern bool efi_noinitrd;
+extern int efi_loglevel;
+extern bool efi_novamap;
+
+extern const efi_system_table_t *efi_system_table;
+
+efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
+				   efi_system_table_t *sys_table_arg);
+
+#ifndef ARCH_HAS_EFISTUB_WRAPPERS
+
+#define efi_is_native()		(true)
+#define efi_bs_call(func, ...)	efi_system_table->boottime->func(__VA_ARGS__)
+#define efi_rt_call(func, ...)	efi_system_table->runtime->func(__VA_ARGS__)
+#define efi_table_attr(inst, attr)	(inst->attr)
+#define efi_call_proto(inst, func, ...) inst->func(inst, ##__VA_ARGS__)
+
+#endif
+
+#define efi_info(fmt, ...) \
+	efi_printk(KERN_INFO fmt, ##__VA_ARGS__)
+#define efi_warn(fmt, ...) \
+	efi_printk(KERN_WARNING "WARNING: " fmt, ##__VA_ARGS__)
+#define efi_err(fmt, ...) \
+	efi_printk(KERN_ERR "ERROR: " fmt, ##__VA_ARGS__)
+#define efi_debug(fmt, ...) \
+	efi_printk(KERN_DEBUG "DEBUG: " fmt, ##__VA_ARGS__)
+
+#define efi_printk_once(fmt, ...) 		\
+({						\
+	static bool __print_once;		\
+	bool __ret_print_once = !__print_once;	\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		efi_printk(fmt, ##__VA_ARGS__);	\
+	}					\
+	__ret_print_once;			\
+})
+
+#define efi_info_once(fmt, ...) \
+	efi_printk_once(KERN_INFO fmt, ##__VA_ARGS__)
+#define efi_warn_once(fmt, ...) \
+	efi_printk_once(KERN_WARNING "WARNING: " fmt, ##__VA_ARGS__)
+#define efi_err_once(fmt, ...) \
+	efi_printk_once(KERN_ERR "ERROR: " fmt, ##__VA_ARGS__)
+#define efi_debug_once(fmt, ...) \
+	efi_printk_once(KERN_DEBUG "DEBUG: " fmt, ##__VA_ARGS__)
+
+/* Helper macros for the usual case of using simple C variables: */
+#ifndef fdt_setprop_inplace_var
+#define fdt_setprop_inplace_var(fdt, node_offset, name, var) \
+	fdt_setprop_inplace((fdt), (node_offset), (name), &(var), sizeof(var))
+#endif
+
+#ifndef fdt_setprop_var
+#define fdt_setprop_var(fdt, node_offset, name, var) \
+	fdt_setprop((fdt), (node_offset), (name), &(var), sizeof(var))
+#endif
+
+#define get_efi_var(name, vendor, ...)				\
+	efi_rt_call(get_variable, (efi_char16_t *)(name),	\
+		    (efi_guid_t *)(vendor), __VA_ARGS__)
+
+#define set_efi_var(name, vendor, ...)				\
+	efi_rt_call(set_variable, (efi_char16_t *)(name),	\
+		    (efi_guid_t *)(vendor), __VA_ARGS__)
+
+#define efi_get_handle_at(array, idx)					\
+	(efi_is_native() ? (array)[idx] 				\
+		: (efi_handle_t)(unsigned long)((u32 *)(array))[idx])
+
+#define efi_get_handle_num(size)					\
+	((size) / (efi_is_native() ? sizeof(efi_handle_t) : sizeof(u32)))
+
+#define for_each_efi_handle(handle, array, size, i)			\
+	for (i = 0;							\
+	     i < efi_get_handle_num(size) &&				\
+		((handle = efi_get_handle_at((array), i)) || true);	\
+	     i++)
+
+static inline
+void efi_set_u64_split(u64 data, u32 *lo, u32 *hi)
+{
+	*lo = lower_32_bits(data);
+	*hi = upper_32_bits(data);
+}
+
+/*
+ * Allocation types for calls to boottime->allocate_pages.
+ */
+#define EFI_ALLOCATE_ANY_PAGES		0
+#define EFI_ALLOCATE_MAX_ADDRESS	1
+#define EFI_ALLOCATE_ADDRESS		2
+#define EFI_MAX_ALLOCATE_TYPE		3
+
+/*
+ * The type of search to perform when calling boottime->locate_handle
+ */
+#define EFI_LOCATE_ALL_HANDLES			0
+#define EFI_LOCATE_BY_REGISTER_NOTIFY		1
+#define EFI_LOCATE_BY_PROTOCOL			2
+
+/*
+ * boottime->stall takes the time period in microseconds
+ */
+#define EFI_USEC_PER_SEC		1000000
+
+/*
+ * boottime->set_timer takes the time in 100ns units
+ */
+#define EFI_100NSEC_PER_USEC	((u64)10)
+
+/*
+ * An efi_boot_memmap is used by efi_get_memory_map() to return the
+ * EFI memory map in a dynamically allocated buffer.
+ *
+ * The buffer allocated for the EFI memory map includes extra room for
+ * a minimum of EFI_MMAP_NR_SLACK_SLOTS additional EFI memory descriptors.
+ * This facilitates the reuse of the EFI memory map buffer when a second
+ * call to ExitBootServices() is needed because of intervening changes to
+ * the EFI memory map. Other related structures, e.g. x86 e820ext, need
+ * to factor in this headroom requirement as well.
+ */
+#define EFI_MMAP_NR_SLACK_SLOTS	8
+
+struct efi_boot_memmap {
+	efi_memory_desc_t	**map;
+	unsigned long		*map_size;
+	unsigned long		*desc_size;
+	u32			*desc_ver;
+	unsigned long		*key_ptr;
+	unsigned long		*buff_size;
+};
+
+typedef struct efi_generic_dev_path efi_device_path_protocol_t;
+
+typedef void *efi_event_t;
+/* Note that notifications won't work in mixed mode */
+typedef void (__efiapi *efi_event_notify_t)(efi_event_t, void *);
+
+#define EFI_EVT_TIMER		0x80000000U
+#define EFI_EVT_RUNTIME		0x40000000U
+#define EFI_EVT_NOTIFY_WAIT	0x00000100U
+#define EFI_EVT_NOTIFY_SIGNAL	0x00000200U
+
+/**
+ * efi_set_event_at() - add event to events array
+ *
+ * @events:	array of UEFI events
+ * @ids:	index where to put the event in the array
+ * @event:	event to add to the aray
+ *
+ * boottime->wait_for_event() takes an array of events as input.
+ * Provide a helper to set it up correctly for mixed mode.
+ */
+static inline
+void efi_set_event_at(efi_event_t *events, size_t idx, efi_event_t event)
+{
+	if (efi_is_native())
+		events[idx] = event;
+	else
+		((u32 *)events)[idx] = (u32)(unsigned long)event;
+}
+
+#define EFI_TPL_APPLICATION	4
+#define EFI_TPL_CALLBACK	8
+#define EFI_TPL_NOTIFY		16
+#define EFI_TPL_HIGH_LEVEL	31
+
+typedef enum {
+	EfiTimerCancel,
+	EfiTimerPeriodic,
+	EfiTimerRelative
+} EFI_TIMER_DELAY;
+
+/*
+ * EFI Boot Services table
+ */
+union efi_boot_services {
+	struct {
+		efi_table_hdr_t hdr;
+		void *raise_tpl;
+		void *restore_tpl;
+		efi_status_t (__efiapi *allocate_pages)(int, int, unsigned long,
+							efi_physical_addr_t *);
+		efi_status_t (__efiapi *free_pages)(efi_physical_addr_t,
+						    unsigned long);
+		efi_status_t (__efiapi *get_memory_map)(unsigned long *, void *,
+							unsigned long *,
+							unsigned long *, u32 *);
+		efi_status_t (__efiapi *allocate_pool)(int, unsigned long,
+						       void **);
+		efi_status_t (__efiapi *free_pool)(void *);
+		efi_status_t (__efiapi *create_event)(u32, unsigned long,
+						      efi_event_notify_t, void *,
+						      efi_event_t *);
+		efi_status_t (__efiapi *set_timer)(efi_event_t,
+						  EFI_TIMER_DELAY, u64);
+		efi_status_t (__efiapi *wait_for_event)(unsigned long,
+							efi_event_t *,
+							unsigned long *);
+		void *signal_event;
+		efi_status_t (__efiapi *close_event)(efi_event_t);
+		void *check_event;
+		void *install_protocol_interface;
+		void *reinstall_protocol_interface;
+		void *uninstall_protocol_interface;
+		efi_status_t (__efiapi *handle_protocol)(efi_handle_t,
+							 efi_guid_t *, void **);
+		void *__reserved;
+		void *register_protocol_notify;
+		efi_status_t (__efiapi *locate_handle)(int, efi_guid_t *,
+						       void *, unsigned long *,
+						       efi_handle_t *);
+		efi_status_t (__efiapi *locate_device_path)(efi_guid_t *,
+							    efi_device_path_protocol_t **,
+							    efi_handle_t *);
+		efi_status_t (__efiapi *install_configuration_table)(efi_guid_t *,
+								     void *);
+		void *load_image;
+		void *start_image;
+		efi_status_t __noreturn (__efiapi *exit)(efi_handle_t,
+							 efi_status_t,
+							 unsigned long,
+							 efi_char16_t *);
+		void *unload_image;
+		efi_status_t (__efiapi *exit_boot_services)(efi_handle_t,
+							    unsigned long);
+		void *get_next_monotonic_count;
+		efi_status_t (__efiapi *stall)(unsigned long);
+		void *set_watchdog_timer;
+		void *connect_controller;
+		efi_status_t (__efiapi *disconnect_controller)(efi_handle_t,
+							       efi_handle_t,
+							       efi_handle_t);
+		void *open_protocol;
+		void *close_protocol;
+		void *open_protocol_information;
+		void *protocols_per_handle;
+		void *locate_handle_buffer;
+		efi_status_t (__efiapi *locate_protocol)(efi_guid_t *, void *,
+							 void **);
+		void *install_multiple_protocol_interfaces;
+		void *uninstall_multiple_protocol_interfaces;
+		void *calculate_crc32;
+		void *copy_mem;
+		void *set_mem;
+		void *create_event_ex;
+	};
+	struct {
+		efi_table_hdr_t hdr;
+		u32 raise_tpl;
+		u32 restore_tpl;
+		u32 allocate_pages;
+		u32 free_pages;
+		u32 get_memory_map;
+		u32 allocate_pool;
+		u32 free_pool;
+		u32 create_event;
+		u32 set_timer;
+		u32 wait_for_event;
+		u32 signal_event;
+		u32 close_event;
+		u32 check_event;
+		u32 install_protocol_interface;
+		u32 reinstall_protocol_interface;
+		u32 uninstall_protocol_interface;
+		u32 handle_protocol;
+		u32 __reserved;
+		u32 register_protocol_notify;
+		u32 locate_handle;
+		u32 locate_device_path;
+		u32 install_configuration_table;
+		u32 load_image;
+		u32 start_image;
+		u32 exit;
+		u32 unload_image;
+		u32 exit_boot_services;
+		u32 get_next_monotonic_count;
+		u32 stall;
+		u32 set_watchdog_timer;
+		u32 connect_controller;
+		u32 disconnect_controller;
+		u32 open_protocol;
+		u32 close_protocol;
+		u32 open_protocol_information;
+		u32 protocols_per_handle;
+		u32 locate_handle_buffer;
+		u32 locate_protocol;
+		u32 install_multiple_protocol_interfaces;
+		u32 uninstall_multiple_protocol_interfaces;
+		u32 calculate_crc32;
+		u32 copy_mem;
+		u32 set_mem;
+		u32 create_event_ex;
+	} mixed_mode;
+};
+
+typedef union efi_uga_draw_protocol efi_uga_draw_protocol_t;
+
+union efi_uga_draw_protocol {
+	struct {
+		efi_status_t (__efiapi *get_mode)(efi_uga_draw_protocol_t *,
+						  u32*, u32*, u32*, u32*);
+		void *set_mode;
+		void *blt;
+	};
+	struct {
+		u32 get_mode;
+		u32 set_mode;
+		u32 blt;
+	} mixed_mode;
+};
+
+typedef struct {
+	u16 scan_code;
+	efi_char16_t unicode_char;
+} efi_input_key_t;
+
+union efi_simple_text_input_protocol {
+	struct {
+		void *reset;
+		efi_status_t (__efiapi *read_keystroke)(efi_simple_text_input_protocol_t *,
+							efi_input_key_t *);
+		efi_event_t wait_for_key;
+	};
+	struct {
+		u32 reset;
+		u32 read_keystroke;
+		u32 wait_for_key;
+	} mixed_mode;
+};
+
+efi_status_t efi_wait_for_key(unsigned long usec, efi_input_key_t *key);
+
+union efi_simple_text_output_protocol {
+	struct {
+		void *reset;
+		efi_status_t (__efiapi *output_string)(efi_simple_text_output_protocol_t *,
+						       efi_char16_t *);
+		void *test_string;
+	};
+	struct {
+		u32 reset;
+		u32 output_string;
+		u32 test_string;
+	} mixed_mode;
+};
+
+#define PIXEL_RGB_RESERVED_8BIT_PER_COLOR		0
+#define PIXEL_BGR_RESERVED_8BIT_PER_COLOR		1
+#define PIXEL_BIT_MASK					2
+#define PIXEL_BLT_ONLY					3
+#define PIXEL_FORMAT_MAX				4
+
+typedef struct {
+	u32 red_mask;
+	u32 green_mask;
+	u32 blue_mask;
+	u32 reserved_mask;
+} efi_pixel_bitmask_t;
+
+typedef struct {
+	u32 version;
+	u32 horizontal_resolution;
+	u32 vertical_resolution;
+	int pixel_format;
+	efi_pixel_bitmask_t pixel_information;
+	u32 pixels_per_scan_line;
+} efi_graphics_output_mode_info_t;
+
+typedef union efi_graphics_output_protocol_mode efi_graphics_output_protocol_mode_t;
+
+union efi_graphics_output_protocol_mode {
+	struct {
+		u32 max_mode;
+		u32 mode;
+		efi_graphics_output_mode_info_t *info;
+		unsigned long size_of_info;
+		efi_physical_addr_t frame_buffer_base;
+		unsigned long frame_buffer_size;
+	};
+	struct {
+		u32 max_mode;
+		u32 mode;
+		u32 info;
+		u32 size_of_info;
+		u64 frame_buffer_base;
+		u32 frame_buffer_size;
+	} mixed_mode;
+};
+
+typedef union efi_graphics_output_protocol efi_graphics_output_protocol_t;
+
+union efi_graphics_output_protocol {
+	struct {
+		efi_status_t (__efiapi *query_mode)(efi_graphics_output_protocol_t *,
+						    u32, unsigned long *,
+						    efi_graphics_output_mode_info_t **);
+		efi_status_t (__efiapi *set_mode)  (efi_graphics_output_protocol_t *, u32);
+		void *blt;
+		efi_graphics_output_protocol_mode_t *mode;
+	};
+	struct {
+		u32 query_mode;
+		u32 set_mode;
+		u32 blt;
+		u32 mode;
+	} mixed_mode;
+};
+
+typedef union {
+	struct {
+		u32			revision;
+		efi_handle_t		parent_handle;
+		efi_system_table_t	*system_table;
+		efi_handle_t		device_handle;
+		void			*file_path;
+		void			*reserved;
+		u32			load_options_size;
+		void			*load_options;
+		void			*image_base;
+		__aligned_u64		image_size;
+		unsigned int		image_code_type;
+		unsigned int		image_data_type;
+		efi_status_t		(__efiapi *unload)(efi_handle_t image_handle);
+	};
+	struct {
+		u32		revision;
+		u32		parent_handle;
+		u32		system_table;
+		u32		device_handle;
+		u32		file_path;
+		u32		reserved;
+		u32		load_options_size;
+		u32		load_options;
+		u32		image_base;
+		__aligned_u64	image_size;
+		u32		image_code_type;
+		u32		image_data_type;
+		u32		unload;
+	} mixed_mode;
+} efi_loaded_image_t;
+
+typedef struct {
+	u64			size;
+	u64			file_size;
+	u64			phys_size;
+	efi_time_t		create_time;
+	efi_time_t		last_access_time;
+	efi_time_t		modification_time;
+	__aligned_u64		attribute;
+	efi_char16_t		filename[];
+} efi_file_info_t;
+
+typedef struct efi_file_protocol efi_file_protocol_t;
+
+struct efi_file_protocol {
+	u64		revision;
+	efi_status_t	(__efiapi *open)	(efi_file_protocol_t *,
+						 efi_file_protocol_t **,
+						 efi_char16_t *, u64, u64);
+	efi_status_t	(__efiapi *close)	(efi_file_protocol_t *);
+	efi_status_t	(__efiapi *delete)	(efi_file_protocol_t *);
+	efi_status_t	(__efiapi *read)	(efi_file_protocol_t *,
+						 unsigned long *, void *);
+	efi_status_t	(__efiapi *write)	(efi_file_protocol_t *,
+						 unsigned long, void *);
+	efi_status_t	(__efiapi *get_position)(efi_file_protocol_t *, u64 *);
+	efi_status_t	(__efiapi *set_position)(efi_file_protocol_t *, u64);
+	efi_status_t	(__efiapi *get_info)	(efi_file_protocol_t *,
+						 efi_guid_t *, unsigned long *,
+						 void *);
+	efi_status_t	(__efiapi *set_info)	(efi_file_protocol_t *,
+						 efi_guid_t *, unsigned long,
+						 void *);
+	efi_status_t	(__efiapi *flush)	(efi_file_protocol_t *);
+};
+
+typedef struct efi_simple_file_system_protocol efi_simple_file_system_protocol_t;
+
+struct efi_simple_file_system_protocol {
+	u64	revision;
+	int	(__efiapi *open_volume)(efi_simple_file_system_protocol_t *,
+					efi_file_protocol_t **);
+};
+
+#define EFI_FILE_MODE_READ	0x0000000000000001
+#define EFI_FILE_MODE_WRITE	0x0000000000000002
+#define EFI_FILE_MODE_CREATE	0x8000000000000000
+
+typedef enum {
+	EfiPciIoWidthUint8,
+	EfiPciIoWidthUint16,
+	EfiPciIoWidthUint32,
+	EfiPciIoWidthUint64,
+	EfiPciIoWidthFifoUint8,
+	EfiPciIoWidthFifoUint16,
+	EfiPciIoWidthFifoUint32,
+	EfiPciIoWidthFifoUint64,
+	EfiPciIoWidthFillUint8,
+	EfiPciIoWidthFillUint16,
+	EfiPciIoWidthFillUint32,
+	EfiPciIoWidthFillUint64,
+	EfiPciIoWidthMaximum
+} EFI_PCI_IO_PROTOCOL_WIDTH;
+
+typedef enum {
+	EfiPciIoAttributeOperationGet,
+	EfiPciIoAttributeOperationSet,
+	EfiPciIoAttributeOperationEnable,
+	EfiPciIoAttributeOperationDisable,
+	EfiPciIoAttributeOperationSupported,
+    EfiPciIoAttributeOperationMaximum
+} EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION;
+
+typedef struct {
+	u32 read;
+	u32 write;
+} efi_pci_io_protocol_access_32_t;
+
+typedef union efi_pci_io_protocol efi_pci_io_protocol_t;
+
+typedef
+efi_status_t (__efiapi *efi_pci_io_protocol_cfg_t)(efi_pci_io_protocol_t *,
+						   EFI_PCI_IO_PROTOCOL_WIDTH,
+						   u32 offset,
+						   unsigned long count,
+						   void *buffer);
+
+typedef struct {
+	void *read;
+	void *write;
+} efi_pci_io_protocol_access_t;
+
+typedef struct {
+	efi_pci_io_protocol_cfg_t read;
+	efi_pci_io_protocol_cfg_t write;
+} efi_pci_io_protocol_config_access_t;
+
+union efi_pci_io_protocol {
+	struct {
+		void *poll_mem;
+		void *poll_io;
+		efi_pci_io_protocol_access_t mem;
+		efi_pci_io_protocol_access_t io;
+		efi_pci_io_protocol_config_access_t pci;
+		void *copy_mem;
+		void *map;
+		void *unmap;
+		void *allocate_buffer;
+		void *free_buffer;
+		void *flush;
+		efi_status_t (__efiapi *get_location)(efi_pci_io_protocol_t *,
+						      unsigned long *segment_nr,
+						      unsigned long *bus_nr,
+						      unsigned long *device_nr,
+						      unsigned long *func_nr);
+		void *attributes;
+		void *get_bar_attributes;
+		void *set_bar_attributes;
+		uint64_t romsize;
+		void *romimage;
+	};
+	struct {
+		u32 poll_mem;
+		u32 poll_io;
+		efi_pci_io_protocol_access_32_t mem;
+		efi_pci_io_protocol_access_32_t io;
+		efi_pci_io_protocol_access_32_t pci;
+		u32 copy_mem;
+		u32 map;
+		u32 unmap;
+		u32 allocate_buffer;
+		u32 free_buffer;
+		u32 flush;
+		u32 get_location;
+		u32 attributes;
+		u32 get_bar_attributes;
+		u32 set_bar_attributes;
+		u64 romsize;
+		u32 romimage;
+	} mixed_mode;
+};
+
+#define EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001
+#define EFI_PCI_IO_ATTRIBUTE_ISA_IO 0x0002
+#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO 0x0004
+#define EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY 0x0008
+#define EFI_PCI_IO_ATTRIBUTE_VGA_IO 0x0010
+#define EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO 0x0020
+#define EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO 0x0040
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080
+#define EFI_PCI_IO_ATTRIBUTE_IO 0x0100
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY 0x0200
+#define EFI_PCI_IO_ATTRIBUTE_BUS_MASTER 0x0400
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED 0x0800
+#define EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE 0x1000
+#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE 0x2000
+#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM 0x4000
+#define EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000
+#define EFI_PCI_IO_ATTRIBUTE_ISA_IO_16 0x10000
+#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 0x20000
+#define EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 0x40000
+
+struct efi_dev_path;
+
+typedef union apple_properties_protocol apple_properties_protocol_t;
+
+union apple_properties_protocol {
+	struct {
+		unsigned long version;
+		efi_status_t (__efiapi *get)(apple_properties_protocol_t *,
+					     struct efi_dev_path *,
+					     efi_char16_t *, void *, u32 *);
+		efi_status_t (__efiapi *set)(apple_properties_protocol_t *,
+					     struct efi_dev_path *,
+					     efi_char16_t *, void *, u32);
+		efi_status_t (__efiapi *del)(apple_properties_protocol_t *,
+					     struct efi_dev_path *,
+					     efi_char16_t *);
+		efi_status_t (__efiapi *get_all)(apple_properties_protocol_t *,
+						 void *buffer, u32 *);
+	};
+	struct {
+		u32 version;
+		u32 get;
+		u32 set;
+		u32 del;
+		u32 get_all;
+	} mixed_mode;
+};
+
+typedef u32 efi_tcg2_event_log_format;
+
+typedef union efi_tcg2_protocol efi_tcg2_protocol_t;
+
+union efi_tcg2_protocol {
+	struct {
+		void *get_capability;
+		efi_status_t (__efiapi *get_event_log)(efi_handle_t,
+						       efi_tcg2_event_log_format,
+						       efi_physical_addr_t *,
+						       efi_physical_addr_t *,
+						       efi_bool_t *);
+		void *hash_log_extend_event;
+		void *submit_command;
+		void *get_active_pcr_banks;
+		void *set_active_pcr_banks;
+		void *get_result_of_set_active_pcr_banks;
+	};
+	struct {
+		u32 get_capability;
+		u32 get_event_log;
+		u32 hash_log_extend_event;
+		u32 submit_command;
+		u32 get_active_pcr_banks;
+		u32 set_active_pcr_banks;
+		u32 get_result_of_set_active_pcr_banks;
+	} mixed_mode;
+};
+
+typedef union efi_load_file_protocol efi_load_file_protocol_t;
+typedef union efi_load_file_protocol efi_load_file2_protocol_t;
+
+union efi_load_file_protocol {
+	struct {
+		efi_status_t (__efiapi *load_file)(efi_load_file_protocol_t *,
+						   efi_device_path_protocol_t *,
+						   bool, unsigned long *, void *);
+	};
+	struct {
+		u32 load_file;
+	} mixed_mode;
+};
+
+typedef struct {
+	u32 attributes;
+	u16 file_path_list_length;
+	u8 variable_data[];
+	// efi_char16_t description[];
+	// efi_device_path_protocol_t file_path_list[];
+	// u8 optional_data[];
+} __packed efi_load_option_t;
+
+#define EFI_LOAD_OPTION_ACTIVE		0x0001U
+#define EFI_LOAD_OPTION_FORCE_RECONNECT	0x0002U
+#define EFI_LOAD_OPTION_HIDDEN		0x0008U
+#define EFI_LOAD_OPTION_CATEGORY	0x1f00U
+#define   EFI_LOAD_OPTION_CATEGORY_BOOT	0x0000U
+#define   EFI_LOAD_OPTION_CATEGORY_APP	0x0100U
+
+#define EFI_LOAD_OPTION_BOOT_MASK \
+	(EFI_LOAD_OPTION_ACTIVE|EFI_LOAD_OPTION_HIDDEN|EFI_LOAD_OPTION_CATEGORY)
+#define EFI_LOAD_OPTION_MASK (EFI_LOAD_OPTION_FORCE_RECONNECT|EFI_LOAD_OPTION_BOOT_MASK)
+
+typedef struct {
+	u32 attributes;
+	u16 file_path_list_length;
+	const efi_char16_t *description;
+	const efi_device_path_protocol_t *file_path_list;
+	size_t optional_data_size;
+	const void *optional_data;
+} efi_load_option_unpacked_t;
+
+void efi_pci_disable_bridge_busmaster(void);
+
+typedef efi_status_t (*efi_exit_boot_map_processing)(
+	struct efi_boot_memmap *map,
+	void *priv);
+
+efi_status_t efi_exit_boot_services(void *handle,
+				    struct efi_boot_memmap *map,
+				    void *priv,
+				    efi_exit_boot_map_processing priv_func);
+
+efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
+					    unsigned long *new_fdt_addr,
+					    unsigned long max_addr,
+					    u64 initrd_addr, u64 initrd_size,
+					    char *cmdline_ptr,
+					    unsigned long fdt_addr,
+					    unsigned long fdt_size);
+
+void *get_fdt(unsigned long *fdt_size);
+
+void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
+		     unsigned long desc_size, efi_memory_desc_t *runtime_map,
+		     int *count);
+
+efi_status_t efi_get_random_bytes(unsigned long size, u8 *out);
+
+efi_status_t efi_random_alloc(unsigned long size, unsigned long align,
+			      unsigned long *addr, unsigned long random_seed);
+
+efi_status_t efi_random_get_seed(void);
+
+efi_status_t check_platform_features(void);
+
+void *get_efi_config_table(efi_guid_t guid);
+
+/* NOTE: These functions do not print a trailing newline after the string */
+void efi_char16_puts(efi_char16_t *);
+void efi_puts(const char *str);
+
+__printf(1, 2) int efi_printk(char const *fmt, ...);
+
+void efi_free(unsigned long size, unsigned long addr);
+
+void efi_apply_loadoptions_quirk(const void **load_options, int *load_options_size);
+
+char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len);
+
+efi_status_t efi_get_memory_map(struct efi_boot_memmap *map);
+
+efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr,
+				unsigned long max);
+
+efi_status_t efi_allocate_pages_aligned(unsigned long size, unsigned long *addr,
+					unsigned long max, unsigned long align);
+
+efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
+				 unsigned long *addr, unsigned long min);
+
+efi_status_t efi_relocate_kernel(unsigned long *image_addr,
+				 unsigned long image_size,
+				 unsigned long alloc_size,
+				 unsigned long preferred_addr,
+				 unsigned long alignment,
+				 unsigned long min_addr);
+
+efi_status_t efi_parse_options(char const *cmdline);
+
+void efi_parse_option_graphics(char *option);
+
+efi_status_t efi_setup_gop(struct screen_info *si, efi_guid_t *proto,
+			   unsigned long size);
+
+efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
+				  const efi_char16_t *optstr,
+				  int optstr_size,
+				  unsigned long soft_limit,
+				  unsigned long hard_limit,
+				  unsigned long *load_addr,
+				  unsigned long *load_size);
+
+
+static inline efi_status_t efi_load_dtb(efi_loaded_image_t *image,
+					unsigned long *load_addr,
+					unsigned long *load_size)
+{
+	return handle_cmdline_files(image, L"dtb=", sizeof(L"dtb=") - 2,
+				    ULONG_MAX, ULONG_MAX, load_addr, load_size);
+}
+
+efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+			     unsigned long *load_addr,
+			     unsigned long *load_size,
+			     unsigned long soft_limit,
+			     unsigned long hard_limit);
+/*
+ * This function handles the architcture specific differences between arm and
+ * arm64 regarding where the kernel image must be loaded and any memory that
+ * must be reserved. On failure it is required to free all
+ * all allocations it has made.
+ */
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 efi_loaded_image_t *image);
+
+asmlinkage void __noreturn efi_enter_kernel(unsigned long entrypoint,
+					    unsigned long fdt_addr,
+					    unsigned long fdt_size);
+
+void efi_handle_post_ebs_state(void);
+
+#endif
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
new file mode 100644
index 000000000..d48b0de05
--- /dev/null
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FDT related Helper functions used by the EFI stub on multiple
+ * architectures. This should be #included by the EFI stub
+ * implementation files.
+ *
+ * Copyright 2013 Linaro Limited; author Roy Franz
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+#define EFI_DT_ADDR_CELLS_DEFAULT 2
+#define EFI_DT_SIZE_CELLS_DEFAULT 2
+
+static void fdt_update_cell_size(void *fdt)
+{
+	int offset;
+
+	offset = fdt_path_offset(fdt, "/");
+	/* Set the #address-cells and #size-cells values for an empty tree */
+
+	fdt_setprop_u32(fdt, offset, "#address-cells", EFI_DT_ADDR_CELLS_DEFAULT);
+	fdt_setprop_u32(fdt, offset, "#size-cells",    EFI_DT_SIZE_CELLS_DEFAULT);
+}
+
+static efi_status_t update_fdt(void *orig_fdt, unsigned long orig_fdt_size,
+			       void *fdt, int new_fdt_size, char *cmdline_ptr,
+			       u64 initrd_addr, u64 initrd_size)
+{
+	int node, num_rsv;
+	int status;
+	u32 fdt_val32;
+	u64 fdt_val64;
+
+	/* Do some checks on provided FDT, if it exists: */
+	if (orig_fdt) {
+		if (fdt_check_header(orig_fdt)) {
+			efi_err("Device Tree header not valid!\n");
+			return EFI_LOAD_ERROR;
+		}
+		/*
+		 * We don't get the size of the FDT if we get if from a
+		 * configuration table:
+		 */
+		if (orig_fdt_size && fdt_totalsize(orig_fdt) > orig_fdt_size) {
+			efi_err("Truncated device tree! foo!\n");
+			return EFI_LOAD_ERROR;
+		}
+	}
+
+	if (orig_fdt) {
+		status = fdt_open_into(orig_fdt, fdt, new_fdt_size);
+	} else {
+		status = fdt_create_empty_tree(fdt, new_fdt_size);
+		if (status == 0) {
+			/*
+			 * Any failure from the following function is
+			 * non-critical:
+			 */
+			fdt_update_cell_size(fdt);
+		}
+	}
+
+	if (status != 0)
+		goto fdt_set_fail;
+
+	/*
+	 * Delete all memory reserve map entries. When booting via UEFI,
+	 * kernel will use the UEFI memory map to find reserved regions.
+	 */
+	num_rsv = fdt_num_mem_rsv(fdt);
+	while (num_rsv-- > 0)
+		fdt_del_mem_rsv(fdt, num_rsv);
+
+	node = fdt_subnode_offset(fdt, 0, "chosen");
+	if (node < 0) {
+		node = fdt_add_subnode(fdt, 0, "chosen");
+		if (node < 0) {
+			/* 'node' is an error code when negative: */
+			status = node;
+			goto fdt_set_fail;
+		}
+	}
+
+	if (cmdline_ptr != NULL && strlen(cmdline_ptr) > 0) {
+		status = fdt_setprop(fdt, node, "bootargs", cmdline_ptr,
+				     strlen(cmdline_ptr) + 1);
+		if (status)
+			goto fdt_set_fail;
+	}
+
+	/* Set initrd address/end in device tree, if present */
+	if (initrd_size != 0) {
+		u64 initrd_image_end;
+		u64 initrd_image_start = cpu_to_fdt64(initrd_addr);
+
+		status = fdt_setprop_var(fdt, node, "linux,initrd-start", initrd_image_start);
+		if (status)
+			goto fdt_set_fail;
+
+		initrd_image_end = cpu_to_fdt64(initrd_addr + initrd_size);
+		status = fdt_setprop_var(fdt, node, "linux,initrd-end", initrd_image_end);
+		if (status)
+			goto fdt_set_fail;
+	}
+
+	/* Add FDT entries for EFI runtime services in chosen node. */
+	node = fdt_subnode_offset(fdt, 0, "chosen");
+	fdt_val64 = cpu_to_fdt64((u64)(unsigned long)efi_system_table);
+
+	status = fdt_setprop_var(fdt, node, "linux,uefi-system-table", fdt_val64);
+	if (status)
+		goto fdt_set_fail;
+
+	fdt_val64 = U64_MAX; /* placeholder */
+
+	status = fdt_setprop_var(fdt, node, "linux,uefi-mmap-start", fdt_val64);
+	if (status)
+		goto fdt_set_fail;
+
+	fdt_val32 = U32_MAX; /* placeholder */
+
+	status = fdt_setprop_var(fdt, node, "linux,uefi-mmap-size", fdt_val32);
+	if (status)
+		goto fdt_set_fail;
+
+	status = fdt_setprop_var(fdt, node, "linux,uefi-mmap-desc-size", fdt_val32);
+	if (status)
+		goto fdt_set_fail;
+
+	status = fdt_setprop_var(fdt, node, "linux,uefi-mmap-desc-ver", fdt_val32);
+	if (status)
+		goto fdt_set_fail;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && !efi_nokaslr) {
+		efi_status_t efi_status;
+
+		efi_status = efi_get_random_bytes(sizeof(fdt_val64),
+						  (u8 *)&fdt_val64);
+		if (efi_status == EFI_SUCCESS) {
+			status = fdt_setprop_var(fdt, node, "kaslr-seed", fdt_val64);
+			if (status)
+				goto fdt_set_fail;
+		}
+	}
+
+	/* Shrink the FDT back to its minimum size: */
+	fdt_pack(fdt);
+
+	return EFI_SUCCESS;
+
+fdt_set_fail:
+	if (status == -FDT_ERR_NOSPACE)
+		return EFI_BUFFER_TOO_SMALL;
+
+	return EFI_LOAD_ERROR;
+}
+
+static efi_status_t update_fdt_memmap(void *fdt, struct efi_boot_memmap *map)
+{
+	int node = fdt_path_offset(fdt, "/chosen");
+	u64 fdt_val64;
+	u32 fdt_val32;
+	int err;
+
+	if (node < 0)
+		return EFI_LOAD_ERROR;
+
+	fdt_val64 = cpu_to_fdt64((unsigned long)*map->map);
+
+	err = fdt_setprop_inplace_var(fdt, node, "linux,uefi-mmap-start", fdt_val64);
+	if (err)
+		return EFI_LOAD_ERROR;
+
+	fdt_val32 = cpu_to_fdt32(*map->map_size);
+
+	err = fdt_setprop_inplace_var(fdt, node, "linux,uefi-mmap-size", fdt_val32);
+	if (err)
+		return EFI_LOAD_ERROR;
+
+	fdt_val32 = cpu_to_fdt32(*map->desc_size);
+
+	err = fdt_setprop_inplace_var(fdt, node, "linux,uefi-mmap-desc-size", fdt_val32);
+	if (err)
+		return EFI_LOAD_ERROR;
+
+	fdt_val32 = cpu_to_fdt32(*map->desc_ver);
+
+	err = fdt_setprop_inplace_var(fdt, node, "linux,uefi-mmap-desc-ver", fdt_val32);
+	if (err)
+		return EFI_LOAD_ERROR;
+
+	return EFI_SUCCESS;
+}
+
+struct exit_boot_struct {
+	efi_memory_desc_t	*runtime_map;
+	int			*runtime_entry_count;
+	void			*new_fdt_addr;
+};
+
+static efi_status_t exit_boot_func(struct efi_boot_memmap *map,
+				   void *priv)
+{
+	struct exit_boot_struct *p = priv;
+	/*
+	 * Update the memory map with virtual addresses. The function will also
+	 * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME
+	 * entries so that we can pass it straight to SetVirtualAddressMap()
+	 */
+	efi_get_virtmap(*map->map, *map->map_size, *map->desc_size,
+			p->runtime_map, p->runtime_entry_count);
+
+	return update_fdt_memmap(p->new_fdt_addr, map);
+}
+
+#ifndef MAX_FDT_SIZE
+# define MAX_FDT_SIZE SZ_2M
+#endif
+
+/*
+ * Allocate memory for a new FDT, then add EFI, commandline, and
+ * initrd related fields to the FDT.  This routine increases the
+ * FDT allocation size until the allocated memory is large
+ * enough.  EFI allocations are in EFI_PAGE_SIZE granules,
+ * which are fixed at 4K bytes, so in most cases the first
+ * allocation should succeed.
+ * EFI boot services are exited at the end of this function.
+ * There must be no allocations between the get_memory_map()
+ * call and the exit_boot_services() call, so the exiting of
+ * boot services is very tightly tied to the creation of the FDT
+ * with the final memory map in it.
+ */
+
+efi_status_t allocate_new_fdt_and_exit_boot(void *handle,
+					    unsigned long *new_fdt_addr,
+					    unsigned long max_addr,
+					    u64 initrd_addr, u64 initrd_size,
+					    char *cmdline_ptr,
+					    unsigned long fdt_addr,
+					    unsigned long fdt_size)
+{
+	unsigned long map_size, desc_size, buff_size;
+	u32 desc_ver;
+	unsigned long mmap_key;
+	efi_memory_desc_t *memory_map, *runtime_map;
+	efi_status_t status;
+	int runtime_entry_count;
+	struct efi_boot_memmap map;
+	struct exit_boot_struct priv;
+
+	map.map		= &runtime_map;
+	map.map_size	= &map_size;
+	map.desc_size	= &desc_size;
+	map.desc_ver	= &desc_ver;
+	map.key_ptr	= &mmap_key;
+	map.buff_size	= &buff_size;
+
+	/*
+	 * Get a copy of the current memory map that we will use to prepare
+	 * the input for SetVirtualAddressMap(). We don't have to worry about
+	 * subsequent allocations adding entries, since they could not affect
+	 * the number of EFI_MEMORY_RUNTIME regions.
+	 */
+	status = efi_get_memory_map(&map);
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to retrieve UEFI memory map.\n");
+		return status;
+	}
+
+	efi_info("Exiting boot services and installing virtual address map...\n");
+
+	map.map = &memory_map;
+	status = efi_allocate_pages(MAX_FDT_SIZE, new_fdt_addr, max_addr);
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to allocate memory for new device tree.\n");
+		goto fail;
+	}
+
+	status = update_fdt((void *)fdt_addr, fdt_size,
+			    (void *)*new_fdt_addr, MAX_FDT_SIZE, cmdline_ptr,
+			    initrd_addr, initrd_size);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to construct new device tree.\n");
+		goto fail_free_new_fdt;
+	}
+
+	runtime_entry_count		= 0;
+	priv.runtime_map		= runtime_map;
+	priv.runtime_entry_count	= &runtime_entry_count;
+	priv.new_fdt_addr		= (void *)*new_fdt_addr;
+
+	status = efi_exit_boot_services(handle, &map, &priv, exit_boot_func);
+
+	if (status == EFI_SUCCESS) {
+		efi_set_virtual_address_map_t *svam;
+
+		if (efi_novamap)
+			return EFI_SUCCESS;
+
+		/* Install the new virtual address map */
+		svam = efi_system_table->runtime->set_virtual_address_map;
+		status = svam(runtime_entry_count * desc_size, desc_size,
+			      desc_ver, runtime_map);
+
+		/*
+		 * We are beyond the point of no return here, so if the call to
+		 * SetVirtualAddressMap() failed, we need to signal that to the
+		 * incoming kernel but proceed normally otherwise.
+		 */
+		if (status != EFI_SUCCESS) {
+			int l;
+
+			/*
+			 * Set the virtual address field of all
+			 * EFI_MEMORY_RUNTIME entries to 0. This will signal
+			 * the incoming kernel that no virtual translation has
+			 * been installed.
+			 */
+			for (l = 0; l < map_size; l += desc_size) {
+				efi_memory_desc_t *p = (void *)memory_map + l;
+
+				if (p->attribute & EFI_MEMORY_RUNTIME)
+					p->virt_addr = 0;
+			}
+		}
+		return EFI_SUCCESS;
+	}
+
+	efi_err("Exit boot services failed.\n");
+
+fail_free_new_fdt:
+	efi_free(MAX_FDT_SIZE, *new_fdt_addr);
+
+fail:
+	efi_system_table->boottime->free_pool(runtime_map);
+
+	return EFI_LOAD_ERROR;
+}
+
+void *get_fdt(unsigned long *fdt_size)
+{
+	void *fdt;
+
+	fdt = get_efi_config_table(DEVICE_TREE_GUID);
+
+	if (!fdt)
+		return NULL;
+
+	if (fdt_check_header(fdt) != 0) {
+		efi_err("Invalid header detected on UEFI supplied FDT, ignoring ...\n");
+		return NULL;
+	}
+	*fdt_size = fdt_totalsize(fdt);
+	return fdt;
+}
diff --git a/drivers/firmware/efi/libstub/file.c b/drivers/firmware/efi/libstub/file.c
new file mode 100644
index 000000000..dd95f330f
--- /dev/null
+++ b/drivers/firmware/efi/libstub/file.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Helper functions used by the EFI stub on multiple
+ * architectures. This should be #included by the EFI stub
+ * implementation files.
+ *
+ * Copyright 2011 Intel Corporation; author Matt Fleming
+ */
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+#define MAX_FILENAME_SIZE	256
+
+/*
+ * Some firmware implementations have problems reading files in one go.
+ * A read chunk size of 1MB seems to work for most platforms.
+ *
+ * Unfortunately, reading files in chunks triggers *other* bugs on some
+ * platforms, so we provide a way to disable this workaround, which can
+ * be done by passing "efi=nochunk" on the EFI boot stub command line.
+ *
+ * If you experience issues with initrd images being corrupt it's worth
+ * trying efi=nochunk, but chunking is enabled by default on x86 because
+ * there are far more machines that require the workaround than those that
+ * break with it enabled.
+ */
+#define EFI_READ_CHUNK_SIZE	SZ_1M
+
+struct finfo {
+	efi_file_info_t info;
+	efi_char16_t	filename[MAX_FILENAME_SIZE];
+};
+
+static efi_status_t efi_open_file(efi_file_protocol_t *volume,
+				  struct finfo *fi,
+				  efi_file_protocol_t **handle,
+				  unsigned long *file_size)
+{
+	efi_guid_t info_guid = EFI_FILE_INFO_ID;
+	efi_file_protocol_t *fh;
+	unsigned long info_sz;
+	efi_status_t status;
+
+	status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to open file: %ls\n", fi->filename);
+		return status;
+	}
+
+	info_sz = sizeof(struct finfo);
+	status = fh->get_info(fh, &info_guid, &info_sz, fi);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to get file info\n");
+		fh->close(fh);
+		return status;
+	}
+
+	*handle = fh;
+	*file_size = fi->info.file_size;
+	return EFI_SUCCESS;
+}
+
+static efi_status_t efi_open_volume(efi_loaded_image_t *image,
+				    efi_file_protocol_t **fh)
+{
+	efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
+	efi_simple_file_system_protocol_t *io;
+	efi_status_t status;
+
+	status = efi_bs_call(handle_protocol, image->device_handle, &fs_proto,
+			     (void **)&io);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to handle fs_proto\n");
+		return status;
+	}
+
+	status = io->open_volume(io, fh);
+	if (status != EFI_SUCCESS)
+		efi_err("Failed to open volume\n");
+
+	return status;
+}
+
+static int find_file_option(const efi_char16_t *cmdline, int cmdline_len,
+			    const efi_char16_t *prefix, int prefix_size,
+			    efi_char16_t *result, int result_len)
+{
+	int prefix_len = prefix_size / 2;
+	bool found = false;
+	int i;
+
+	for (i = prefix_len; i < cmdline_len; i++) {
+		if (!memcmp(&cmdline[i - prefix_len], prefix, prefix_size)) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		return 0;
+
+	/* Skip any leading slashes */
+	while (i < cmdline_len && (cmdline[i] == L'/' || cmdline[i] == L'\\'))
+		i++;
+
+	while (--result_len > 0 && i < cmdline_len) {
+		efi_char16_t c = cmdline[i++];
+
+		if (c == L'\0' || c == L'\n' || c == L' ')
+			break;
+		else if (c == L'/')
+			/* Replace UNIX dir separators with EFI standard ones */
+			*result++ = L'\\';
+		else
+			*result++ = c;
+	}
+	*result = L'\0';
+	return i;
+}
+
+/*
+ * Check the cmdline for a LILO-style file= arguments.
+ *
+ * We only support loading a file from the same filesystem as
+ * the kernel image.
+ */
+efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
+				  const efi_char16_t *optstr,
+				  int optstr_size,
+				  unsigned long soft_limit,
+				  unsigned long hard_limit,
+				  unsigned long *load_addr,
+				  unsigned long *load_size)
+{
+	const efi_char16_t *cmdline = image->load_options;
+	int cmdline_len = image->load_options_size;
+	unsigned long efi_chunk_size = ULONG_MAX;
+	efi_file_protocol_t *volume = NULL;
+	efi_file_protocol_t *file;
+	unsigned long alloc_addr;
+	unsigned long alloc_size;
+	efi_status_t status;
+	int offset;
+
+	if (!load_addr || !load_size)
+		return EFI_INVALID_PARAMETER;
+
+	efi_apply_loadoptions_quirk((const void **)&cmdline, &cmdline_len);
+	cmdline_len /= sizeof(*cmdline);
+
+	if (IS_ENABLED(CONFIG_X86) && !efi_nochunk)
+		efi_chunk_size = EFI_READ_CHUNK_SIZE;
+
+	alloc_addr = alloc_size = 0;
+	do {
+		struct finfo fi;
+		unsigned long size;
+		void *addr;
+
+		offset = find_file_option(cmdline, cmdline_len,
+					  optstr, optstr_size,
+					  fi.filename, ARRAY_SIZE(fi.filename));
+
+		if (!offset)
+			break;
+
+		cmdline += offset;
+		cmdline_len -= offset;
+
+		if (!volume) {
+			status = efi_open_volume(image, &volume);
+			if (status != EFI_SUCCESS)
+				return status;
+		}
+
+		status = efi_open_file(volume, &fi, &file, &size);
+		if (status != EFI_SUCCESS)
+			goto err_close_volume;
+
+		/*
+		 * Check whether the existing allocation can contain the next
+		 * file. This condition will also trigger naturally during the
+		 * first (and typically only) iteration of the loop, given that
+		 * alloc_size == 0 in that case.
+		 */
+		if (round_up(alloc_size + size, EFI_ALLOC_ALIGN) >
+		    round_up(alloc_size, EFI_ALLOC_ALIGN)) {
+			unsigned long old_addr = alloc_addr;
+
+			status = EFI_OUT_OF_RESOURCES;
+			if (soft_limit < hard_limit)
+				status = efi_allocate_pages(alloc_size + size,
+							    &alloc_addr,
+							    soft_limit);
+			if (status == EFI_OUT_OF_RESOURCES)
+				status = efi_allocate_pages(alloc_size + size,
+							    &alloc_addr,
+							    hard_limit);
+			if (status != EFI_SUCCESS) {
+				efi_err("Failed to allocate memory for files\n");
+				goto err_close_file;
+			}
+
+			if (old_addr != 0) {
+				/*
+				 * This is not the first time we've gone
+				 * around this loop, and so we are loading
+				 * multiple files that need to be concatenated
+				 * and returned in a single buffer.
+				 */
+				memcpy((void *)alloc_addr, (void *)old_addr, alloc_size);
+				efi_free(alloc_size, old_addr);
+			}
+		}
+
+		addr = (void *)alloc_addr + alloc_size;
+		alloc_size += size;
+
+		while (size) {
+			unsigned long chunksize = min(size, efi_chunk_size);
+
+			status = file->read(file, &chunksize, addr);
+			if (status != EFI_SUCCESS) {
+				efi_err("Failed to read file\n");
+				goto err_close_file;
+			}
+			addr += chunksize;
+			size -= chunksize;
+		}
+		file->close(file);
+	} while (offset > 0);
+
+	*load_addr = alloc_addr;
+	*load_size = alloc_size;
+
+	if (volume)
+		volume->close(volume);
+	return EFI_SUCCESS;
+
+err_close_file:
+	file->close(file);
+
+err_close_volume:
+	volume->close(volume);
+	efi_free(alloc_size, alloc_addr);
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/gop.c b/drivers/firmware/efi/libstub/gop.c
new file mode 100644
index 000000000..ea5da307d
--- /dev/null
+++ b/drivers/firmware/efi/libstub/gop.c
@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: GPL-2.0
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2011 Intel Corporation; author Matt Fleming
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/efi.h>
+#include <linux/screen_info.h>
+#include <linux/string.h>
+#include <asm/efi.h>
+#include <asm/setup.h>
+
+#include "efistub.h"
+
+enum efi_cmdline_option {
+	EFI_CMDLINE_NONE,
+	EFI_CMDLINE_MODE_NUM,
+	EFI_CMDLINE_RES,
+	EFI_CMDLINE_AUTO,
+	EFI_CMDLINE_LIST
+};
+
+static struct {
+	enum efi_cmdline_option option;
+	union {
+		u32 mode;
+		struct {
+			u32 width, height;
+			int format;
+			u8 depth;
+		} res;
+	};
+} cmdline = { .option = EFI_CMDLINE_NONE };
+
+static bool parse_modenum(char *option, char **next)
+{
+	u32 m;
+
+	if (!strstarts(option, "mode="))
+		return false;
+	option += strlen("mode=");
+	m = simple_strtoull(option, &option, 0);
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_MODE_NUM;
+	cmdline.mode   = m;
+
+	*next = option;
+	return true;
+}
+
+static bool parse_res(char *option, char **next)
+{
+	u32 w, h, d = 0;
+	int pf = -1;
+
+	if (!isdigit(*option))
+		return false;
+	w = simple_strtoull(option, &option, 10);
+	if (*option++ != 'x' || !isdigit(*option))
+		return false;
+	h = simple_strtoull(option, &option, 10);
+	if (*option == '-') {
+		option++;
+		if (strstarts(option, "rgb")) {
+			option += strlen("rgb");
+			pf = PIXEL_RGB_RESERVED_8BIT_PER_COLOR;
+		} else if (strstarts(option, "bgr")) {
+			option += strlen("bgr");
+			pf = PIXEL_BGR_RESERVED_8BIT_PER_COLOR;
+		} else if (isdigit(*option))
+			d = simple_strtoull(option, &option, 10);
+		else
+			return false;
+	}
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option     = EFI_CMDLINE_RES;
+	cmdline.res.width  = w;
+	cmdline.res.height = h;
+	cmdline.res.format = pf;
+	cmdline.res.depth  = d;
+
+	*next = option;
+	return true;
+}
+
+static bool parse_auto(char *option, char **next)
+{
+	if (!strstarts(option, "auto"))
+		return false;
+	option += strlen("auto");
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_AUTO;
+
+	*next = option;
+	return true;
+}
+
+static bool parse_list(char *option, char **next)
+{
+	if (!strstarts(option, "list"))
+		return false;
+	option += strlen("list");
+	if (*option && *option++ != ',')
+		return false;
+	cmdline.option = EFI_CMDLINE_LIST;
+
+	*next = option;
+	return true;
+}
+
+void efi_parse_option_graphics(char *option)
+{
+	while (*option) {
+		if (parse_modenum(option, &option))
+			continue;
+		if (parse_res(option, &option))
+			continue;
+		if (parse_auto(option, &option))
+			continue;
+		if (parse_list(option, &option))
+			continue;
+
+		while (*option && *option++ != ',')
+			;
+	}
+}
+
+static u32 choose_mode_modenum(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	if (cmdline.mode == cur_mode)
+		return cur_mode;
+
+	max_mode = efi_table_attr(mode, max_mode);
+	if (cmdline.mode >= max_mode) {
+		efi_err("Requested mode is invalid\n");
+		return cur_mode;
+	}
+
+	status = efi_call_proto(gop, query_mode, cmdline.mode,
+				&info_size, &info);
+	if (status != EFI_SUCCESS) {
+		efi_err("Couldn't get mode information\n");
+		return cur_mode;
+	}
+
+	pf = info->pixel_format;
+
+	efi_bs_call(free_pool, info);
+
+	if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX) {
+		efi_err("Invalid PixelFormat\n");
+		return cur_mode;
+	}
+
+	return cmdline.mode;
+}
+
+static u8 pixel_bpp(int pixel_format, efi_pixel_bitmask_t pixel_info)
+{
+	if (pixel_format == PIXEL_BIT_MASK) {
+		u32 mask = pixel_info.red_mask | pixel_info.green_mask |
+			   pixel_info.blue_mask | pixel_info.reserved_mask;
+		if (!mask)
+			return 0;
+		return __fls(mask) - __ffs(mask) + 1;
+	} else
+		return 32;
+}
+
+static u32 choose_mode_res(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+	efi_pixel_bitmask_t pi;
+	u32 m, w, h;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	info = efi_table_attr(mode, info);
+	pf = info->pixel_format;
+	pi = info->pixel_information;
+	w  = info->horizontal_resolution;
+	h  = info->vertical_resolution;
+
+	if (w == cmdline.res.width && h == cmdline.res.height &&
+	    (cmdline.res.format < 0 || cmdline.res.format == pf) &&
+	    (!cmdline.res.depth || cmdline.res.depth == pixel_bpp(pf, pi)))
+		return cur_mode;
+
+	max_mode = efi_table_attr(mode, max_mode);
+
+	for (m = 0; m < max_mode; m++) {
+		if (m == cur_mode)
+			continue;
+
+		status = efi_call_proto(gop, query_mode, m,
+					&info_size, &info);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pf = info->pixel_format;
+		pi = info->pixel_information;
+		w  = info->horizontal_resolution;
+		h  = info->vertical_resolution;
+
+		efi_bs_call(free_pool, info);
+
+		if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX)
+			continue;
+		if (w == cmdline.res.width && h == cmdline.res.height &&
+		    (cmdline.res.format < 0 || cmdline.res.format == pf) &&
+		    (!cmdline.res.depth || cmdline.res.depth == pixel_bpp(pf, pi)))
+			return m;
+	}
+
+	efi_err("Couldn't find requested mode\n");
+
+	return cur_mode;
+}
+
+static u32 choose_mode_auto(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode, best_mode, area;
+	u8 depth;
+	int pf;
+	efi_pixel_bitmask_t pi;
+	u32 m, w, h, a;
+	u8 d;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	max_mode = efi_table_attr(mode, max_mode);
+
+	info = efi_table_attr(mode, info);
+
+	pf = info->pixel_format;
+	pi = info->pixel_information;
+	w  = info->horizontal_resolution;
+	h  = info->vertical_resolution;
+
+	best_mode = cur_mode;
+	area = w * h;
+	depth = pixel_bpp(pf, pi);
+
+	for (m = 0; m < max_mode; m++) {
+		if (m == cur_mode)
+			continue;
+
+		status = efi_call_proto(gop, query_mode, m,
+					&info_size, &info);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pf = info->pixel_format;
+		pi = info->pixel_information;
+		w  = info->horizontal_resolution;
+		h  = info->vertical_resolution;
+
+		efi_bs_call(free_pool, info);
+
+		if (pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX)
+			continue;
+		a = w * h;
+		if (a < area)
+			continue;
+		d = pixel_bpp(pf, pi);
+		if (a > area || d > depth) {
+			best_mode = m;
+			area = a;
+			depth = d;
+		}
+	}
+
+	return best_mode;
+}
+
+static u32 choose_mode_list(efi_graphics_output_protocol_t *gop)
+{
+	efi_status_t status;
+
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+	unsigned long info_size;
+
+	u32 max_mode, cur_mode;
+	int pf;
+	efi_pixel_bitmask_t pi;
+	u32 m, w, h;
+	u8 d;
+	const char *dstr;
+	bool valid;
+	efi_input_key_t key;
+
+	mode = efi_table_attr(gop, mode);
+
+	cur_mode = efi_table_attr(mode, mode);
+	max_mode = efi_table_attr(mode, max_mode);
+
+	efi_printk("Available graphics modes are 0-%u\n", max_mode-1);
+	efi_puts("  * = current mode\n"
+		 "  - = unusable mode\n");
+	for (m = 0; m < max_mode; m++) {
+		status = efi_call_proto(gop, query_mode, m,
+					&info_size, &info);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pf = info->pixel_format;
+		pi = info->pixel_information;
+		w  = info->horizontal_resolution;
+		h  = info->vertical_resolution;
+
+		efi_bs_call(free_pool, info);
+
+		valid = !(pf == PIXEL_BLT_ONLY || pf >= PIXEL_FORMAT_MAX);
+		d = 0;
+		switch (pf) {
+		case PIXEL_RGB_RESERVED_8BIT_PER_COLOR:
+			dstr = "rgb";
+			break;
+		case PIXEL_BGR_RESERVED_8BIT_PER_COLOR:
+			dstr = "bgr";
+			break;
+		case PIXEL_BIT_MASK:
+			dstr = "";
+			d = pixel_bpp(pf, pi);
+			break;
+		case PIXEL_BLT_ONLY:
+			dstr = "blt";
+			break;
+		default:
+			dstr = "xxx";
+			break;
+		}
+
+		efi_printk("Mode %3u %c%c: Resolution %ux%u-%s%.0hhu\n",
+			   m,
+			   m == cur_mode ? '*' : ' ',
+			   !valid ? '-' : ' ',
+			   w, h, dstr, d);
+	}
+
+	efi_puts("\nPress any key to continue (or wait 10 seconds)\n");
+	status = efi_wait_for_key(10 * EFI_USEC_PER_SEC, &key);
+	if (status != EFI_SUCCESS && status != EFI_TIMEOUT) {
+		efi_err("Unable to read key, continuing in 10 seconds\n");
+		efi_bs_call(stall, 10 * EFI_USEC_PER_SEC);
+	}
+
+	return cur_mode;
+}
+
+static void set_mode(efi_graphics_output_protocol_t *gop)
+{
+	efi_graphics_output_protocol_mode_t *mode;
+	u32 cur_mode, new_mode;
+
+	switch (cmdline.option) {
+	case EFI_CMDLINE_MODE_NUM:
+		new_mode = choose_mode_modenum(gop);
+		break;
+	case EFI_CMDLINE_RES:
+		new_mode = choose_mode_res(gop);
+		break;
+	case EFI_CMDLINE_AUTO:
+		new_mode = choose_mode_auto(gop);
+		break;
+	case EFI_CMDLINE_LIST:
+		new_mode = choose_mode_list(gop);
+		break;
+	default:
+		return;
+	}
+
+	mode = efi_table_attr(gop, mode);
+	cur_mode = efi_table_attr(mode, mode);
+
+	if (new_mode == cur_mode)
+		return;
+
+	if (efi_call_proto(gop, set_mode, new_mode) != EFI_SUCCESS)
+		efi_err("Failed to set requested mode\n");
+}
+
+static void find_bits(u32 mask, u8 *pos, u8 *size)
+{
+	if (!mask) {
+		*pos = *size = 0;
+		return;
+	}
+
+	/* UEFI spec guarantees that the set bits are contiguous */
+	*pos  = __ffs(mask);
+	*size = __fls(mask) - *pos + 1;
+}
+
+static void
+setup_pixel_info(struct screen_info *si, u32 pixels_per_scan_line,
+		 efi_pixel_bitmask_t pixel_info, int pixel_format)
+{
+	if (pixel_format == PIXEL_BIT_MASK) {
+		find_bits(pixel_info.red_mask,
+			  &si->red_pos, &si->red_size);
+		find_bits(pixel_info.green_mask,
+			  &si->green_pos, &si->green_size);
+		find_bits(pixel_info.blue_mask,
+			  &si->blue_pos, &si->blue_size);
+		find_bits(pixel_info.reserved_mask,
+			  &si->rsvd_pos, &si->rsvd_size);
+		si->lfb_depth = si->red_size + si->green_size +
+			si->blue_size + si->rsvd_size;
+		si->lfb_linelength = (pixels_per_scan_line * si->lfb_depth) / 8;
+	} else {
+		if (pixel_format == PIXEL_RGB_RESERVED_8BIT_PER_COLOR) {
+			si->red_pos   = 0;
+			si->blue_pos  = 16;
+		} else /* PIXEL_BGR_RESERVED_8BIT_PER_COLOR */ {
+			si->blue_pos  = 0;
+			si->red_pos   = 16;
+		}
+
+		si->green_pos = 8;
+		si->rsvd_pos  = 24;
+		si->red_size = si->green_size =
+			si->blue_size = si->rsvd_size = 8;
+
+		si->lfb_depth = 32;
+		si->lfb_linelength = pixels_per_scan_line * 4;
+	}
+}
+
+static efi_graphics_output_protocol_t *
+find_gop(efi_guid_t *proto, unsigned long size, void **handles)
+{
+	efi_graphics_output_protocol_t *first_gop;
+	efi_handle_t h;
+	int i;
+
+	first_gop = NULL;
+
+	for_each_efi_handle(h, handles, size, i) {
+		efi_status_t status;
+
+		efi_graphics_output_protocol_t *gop;
+		efi_graphics_output_protocol_mode_t *mode;
+		efi_graphics_output_mode_info_t *info;
+
+		efi_guid_t conout_proto = EFI_CONSOLE_OUT_DEVICE_GUID;
+		void *dummy = NULL;
+
+		status = efi_bs_call(handle_protocol, h, proto, (void **)&gop);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		mode = efi_table_attr(gop, mode);
+		info = efi_table_attr(mode, info);
+		if (info->pixel_format == PIXEL_BLT_ONLY ||
+		    info->pixel_format >= PIXEL_FORMAT_MAX)
+			continue;
+
+		/*
+		 * Systems that use the UEFI Console Splitter may
+		 * provide multiple GOP devices, not all of which are
+		 * backed by real hardware. The workaround is to search
+		 * for a GOP implementing the ConOut protocol, and if
+		 * one isn't found, to just fall back to the first GOP.
+		 *
+		 * Once we've found a GOP supporting ConOut,
+		 * don't bother looking any further.
+		 */
+		status = efi_bs_call(handle_protocol, h, &conout_proto, &dummy);
+		if (status == EFI_SUCCESS)
+			return gop;
+
+		if (!first_gop)
+			first_gop = gop;
+	}
+
+	return first_gop;
+}
+
+static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
+			      unsigned long size, void **handles)
+{
+	efi_graphics_output_protocol_t *gop;
+	efi_graphics_output_protocol_mode_t *mode;
+	efi_graphics_output_mode_info_t *info;
+
+	gop = find_gop(proto, size, handles);
+
+	/* Did we find any GOPs? */
+	if (!gop)
+		return EFI_NOT_FOUND;
+
+	/* Change mode if requested */
+	set_mode(gop);
+
+	/* EFI framebuffer */
+	mode = efi_table_attr(gop, mode);
+	info = efi_table_attr(mode, info);
+
+	si->orig_video_isVGA = VIDEO_TYPE_EFI;
+
+	si->lfb_width  = info->horizontal_resolution;
+	si->lfb_height = info->vertical_resolution;
+
+	efi_set_u64_split(efi_table_attr(mode, frame_buffer_base),
+			  &si->lfb_base, &si->ext_lfb_base);
+	if (si->ext_lfb_base)
+		si->capabilities |= VIDEO_CAPABILITY_64BIT_BASE;
+
+	si->pages = 1;
+
+	setup_pixel_info(si, info->pixels_per_scan_line,
+			     info->pixel_information, info->pixel_format);
+
+	si->lfb_size = si->lfb_linelength * si->lfb_height;
+
+	si->capabilities |= VIDEO_CAPABILITY_SKIP_QUIRKS;
+
+	return EFI_SUCCESS;
+}
+
+/*
+ * See if we have Graphics Output Protocol
+ */
+efi_status_t efi_setup_gop(struct screen_info *si, efi_guid_t *proto,
+			   unsigned long size)
+{
+	efi_status_t status;
+	void **gop_handle = NULL;
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+			     (void **)&gop_handle);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL, proto, NULL,
+			     &size, gop_handle);
+	if (status != EFI_SUCCESS)
+		goto free_handle;
+
+	status = setup_gop(si, proto, size, gop_handle);
+
+free_handle:
+	efi_bs_call(free_pool, gop_handle);
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/mem.c b/drivers/firmware/efi/libstub/mem.c
new file mode 100644
index 000000000..feef8d4be
--- /dev/null
+++ b/drivers/firmware/efi/libstub/mem.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+static inline bool mmap_has_headroom(unsigned long buff_size,
+				     unsigned long map_size,
+				     unsigned long desc_size)
+{
+	unsigned long slack = buff_size - map_size;
+
+	return slack / desc_size >= EFI_MMAP_NR_SLACK_SLOTS;
+}
+
+/**
+ * efi_get_memory_map() - get memory map
+ * @map:	on return pointer to memory map
+ *
+ * Retrieve the UEFI memory map. The allocated memory leaves room for
+ * up to EFI_MMAP_NR_SLACK_SLOTS additional memory map entries.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_get_memory_map(struct efi_boot_memmap *map)
+{
+	efi_memory_desc_t *m = NULL;
+	efi_status_t status;
+	unsigned long key;
+	u32 desc_version;
+
+	*map->desc_size =	sizeof(*m);
+	*map->map_size =	*map->desc_size * 32;
+	*map->buff_size =	*map->map_size;
+again:
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+			     *map->map_size, (void **)&m);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	*map->desc_size = 0;
+	key = 0;
+	status = efi_bs_call(get_memory_map, map->map_size, m,
+			     &key, map->desc_size, &desc_version);
+	if (status == EFI_BUFFER_TOO_SMALL ||
+	    !mmap_has_headroom(*map->buff_size, *map->map_size,
+			       *map->desc_size)) {
+		efi_bs_call(free_pool, m);
+		/*
+		 * Make sure there is some entries of headroom so that the
+		 * buffer can be reused for a new map after allocations are
+		 * no longer permitted.  Its unlikely that the map will grow to
+		 * exceed this headroom once we are ready to trigger
+		 * ExitBootServices()
+		 */
+		*map->map_size += *map->desc_size * EFI_MMAP_NR_SLACK_SLOTS;
+		*map->buff_size = *map->map_size;
+		goto again;
+	}
+
+	if (status == EFI_SUCCESS) {
+		if (map->key_ptr)
+			*map->key_ptr = key;
+		if (map->desc_ver)
+			*map->desc_ver = desc_version;
+	} else {
+		efi_bs_call(free_pool, m);
+	}
+
+fail:
+	*map->map = m;
+	return status;
+}
+
+/**
+ * efi_allocate_pages() - Allocate memory pages
+ * @size:	minimum number of bytes to allocate
+ * @addr:	On return the address of the first allocated page. The first
+ *		allocated page has alignment EFI_ALLOC_ALIGN which is an
+ *		architecture dependent multiple of the page size.
+ * @max:	the address that the last allocated memory page shall not
+ *		exceed
+ *
+ * Allocate pages as EFI_LOADER_DATA. The allocated pages are aligned according
+ * to EFI_ALLOC_ALIGN. The last allocated page will not exceed the address
+ * given by @max.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_allocate_pages(unsigned long size, unsigned long *addr,
+				unsigned long max)
+{
+	efi_physical_addr_t alloc_addr;
+	efi_status_t status;
+
+	if (EFI_ALLOC_ALIGN > EFI_PAGE_SIZE)
+		return efi_allocate_pages_aligned(size, addr, max,
+						  EFI_ALLOC_ALIGN);
+
+	alloc_addr = ALIGN_DOWN(max + 1, EFI_ALLOC_ALIGN) - 1;
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_MAX_ADDRESS,
+			     EFI_LOADER_DATA, DIV_ROUND_UP(size, EFI_PAGE_SIZE),
+			     &alloc_addr);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	*addr = alloc_addr;
+	return EFI_SUCCESS;
+}
+
+/**
+ * efi_free() - free memory pages
+ * @size:	size of the memory area to free in bytes
+ * @addr:	start of the memory area to free (must be EFI_PAGE_SIZE
+ *		aligned)
+ *
+ * @size is rounded up to a multiple of EFI_ALLOC_ALIGN which is an
+ * architecture specific multiple of EFI_PAGE_SIZE. So this function should
+ * only be used to return pages allocated with efi_allocate_pages() or
+ * efi_low_alloc_above().
+ */
+void efi_free(unsigned long size, unsigned long addr)
+{
+	unsigned long nr_pages;
+
+	if (!size)
+		return;
+
+	nr_pages = round_up(size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
+	efi_bs_call(free_pages, addr, nr_pages);
+}
diff --git a/drivers/firmware/efi/libstub/pci.c b/drivers/firmware/efi/libstub/pci.c
new file mode 100644
index 000000000..99fb25d2b
--- /dev/null
+++ b/drivers/firmware/efi/libstub/pci.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI-related functions used by the EFI stub on multiple
+ * architectures.
+ *
+ * Copyright 2019 Google, LLC
+ */
+
+#include <linux/efi.h>
+#include <linux/pci.h>
+
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+void efi_pci_disable_bridge_busmaster(void)
+{
+	efi_guid_t pci_proto = EFI_PCI_IO_PROTOCOL_GUID;
+	unsigned long pci_handle_size = 0;
+	efi_handle_t *pci_handle = NULL;
+	efi_handle_t handle;
+	efi_status_t status;
+	u16 class, command;
+	int i;
+
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto,
+			     NULL, &pci_handle_size, NULL);
+
+	if (status != EFI_BUFFER_TOO_SMALL) {
+		if (status != EFI_SUCCESS && status != EFI_NOT_FOUND)
+			efi_err("Failed to locate PCI I/O handles'\n");
+		return;
+	}
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, pci_handle_size,
+			     (void **)&pci_handle);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate memory for 'pci_handle'\n");
+		return;
+	}
+
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto,
+			     NULL, &pci_handle_size, pci_handle);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to locate PCI I/O handles'\n");
+		goto free_handle;
+	}
+
+	for_each_efi_handle(handle, pci_handle, pci_handle_size, i) {
+		efi_pci_io_protocol_t *pci;
+		unsigned long segment_nr, bus_nr, device_nr, func_nr;
+
+		status = efi_bs_call(handle_protocol, handle, &pci_proto,
+				     (void **)&pci);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		/*
+		 * Disregard devices living on bus 0 - these are not behind a
+		 * bridge so no point in disconnecting them from their drivers.
+		 */
+		status = efi_call_proto(pci, get_location, &segment_nr, &bus_nr,
+					&device_nr, &func_nr);
+		if (status != EFI_SUCCESS || bus_nr == 0)
+			continue;
+
+		/*
+		 * Don't disconnect VGA controllers so we don't risk losing
+		 * access to the framebuffer. Drivers for true PCIe graphics
+		 * controllers that are behind a PCIe root port do not use
+		 * DMA to implement the GOP framebuffer anyway [although they
+		 * may use it in their implementation of Gop->Blt()], and so
+		 * disabling DMA in the PCI bridge should not interfere with
+		 * normal operation of the device.
+		 */
+		status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
+					PCI_CLASS_DEVICE, 1, &class);
+		if (status != EFI_SUCCESS || class == PCI_CLASS_DISPLAY_VGA)
+			continue;
+
+		/* Disconnect this handle from all its drivers */
+		efi_bs_call(disconnect_controller, handle, NULL, NULL);
+	}
+
+	for_each_efi_handle(handle, pci_handle, pci_handle_size, i) {
+		efi_pci_io_protocol_t *pci;
+
+		status = efi_bs_call(handle_protocol, handle, &pci_proto,
+				     (void **)&pci);
+		if (status != EFI_SUCCESS || !pci)
+			continue;
+
+		status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
+					PCI_CLASS_DEVICE, 1, &class);
+
+		if (status != EFI_SUCCESS || class != PCI_CLASS_BRIDGE_PCI)
+			continue;
+
+		/* Disable busmastering */
+		status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
+					PCI_COMMAND, 1, &command);
+		if (status != EFI_SUCCESS || !(command & PCI_COMMAND_MASTER))
+			continue;
+
+		command &= ~PCI_COMMAND_MASTER;
+		status = efi_call_proto(pci, pci.write, EfiPciIoWidthUint16,
+					PCI_COMMAND, 1, &command);
+		if (status != EFI_SUCCESS)
+			efi_err("Failed to disable PCI busmastering\n");
+	}
+
+free_handle:
+	efi_bs_call(free_pool, pci_handle);
+}
diff --git a/drivers/firmware/efi/libstub/random.c b/drivers/firmware/efi/libstub/random.c
new file mode 100644
index 000000000..f85d2c066
--- /dev/null
+++ b/drivers/firmware/efi/libstub/random.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Linaro Ltd;  <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+typedef union efi_rng_protocol efi_rng_protocol_t;
+
+union efi_rng_protocol {
+	struct {
+		efi_status_t (__efiapi *get_info)(efi_rng_protocol_t *,
+						  unsigned long *,
+						  efi_guid_t *);
+		efi_status_t (__efiapi *get_rng)(efi_rng_protocol_t *,
+						 efi_guid_t *, unsigned long,
+						 u8 *out);
+	};
+	struct {
+		u32 get_info;
+		u32 get_rng;
+	} mixed_mode;
+};
+
+/**
+ * efi_get_random_bytes() - fill a buffer with random bytes
+ * @size:	size of the buffer
+ * @out:	caller allocated buffer to receive the random bytes
+ *
+ * The call will fail if either the firmware does not implement the
+ * EFI_RNG_PROTOCOL or there are not enough random bytes available to fill
+ * the buffer.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_get_random_bytes(unsigned long size, u8 *out)
+{
+	efi_guid_t rng_proto = EFI_RNG_PROTOCOL_GUID;
+	efi_status_t status;
+	efi_rng_protocol_t *rng = NULL;
+
+	status = efi_bs_call(locate_protocol, &rng_proto, NULL, (void **)&rng);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	return efi_call_proto(rng, get_rng, NULL, size, out);
+}
+
+/**
+ * efi_random_get_seed() - provide random seed as configuration table
+ *
+ * The EFI_RNG_PROTOCOL is used to read random bytes. These random bytes are
+ * saved as a configuration table which can be used as entropy by the kernel
+ * for the initialization of its pseudo random number generator.
+ *
+ * If the EFI_RNG_PROTOCOL is not available or there are not enough random bytes
+ * available, the configuration table will not be installed and an error code
+ * will be returned.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_random_get_seed(void)
+{
+	efi_guid_t rng_proto = EFI_RNG_PROTOCOL_GUID;
+	efi_guid_t rng_algo_raw = EFI_RNG_ALGORITHM_RAW;
+	efi_guid_t rng_table_guid = LINUX_EFI_RANDOM_SEED_TABLE_GUID;
+	struct linux_efi_random_seed *prev_seed, *seed = NULL;
+	int prev_seed_size = 0, seed_size = EFI_RANDOM_SEED_SIZE;
+	efi_rng_protocol_t *rng = NULL;
+	efi_status_t status;
+
+	status = efi_bs_call(locate_protocol, &rng_proto, NULL, (void **)&rng);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	/*
+	 * Check whether a seed was provided by a prior boot stage. In that
+	 * case, instead of overwriting it, let's create a new buffer that can
+	 * hold both, and concatenate the existing and the new seeds.
+	 * Note that we should read the seed size with caution, in case the
+	 * table got corrupted in memory somehow.
+	 */
+	prev_seed = get_efi_config_table(LINUX_EFI_RANDOM_SEED_TABLE_GUID);
+	if (prev_seed && prev_seed->size <= 512U) {
+		prev_seed_size = prev_seed->size;
+		seed_size += prev_seed_size;
+	}
+
+	/*
+	 * Use EFI_ACPI_RECLAIM_MEMORY here so that it is guaranteed that the
+	 * allocation will survive a kexec reboot (although we refresh the seed
+	 * beforehand)
+	 */
+	status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY,
+			     struct_size(seed, bits, seed_size),
+			     (void **)&seed);
+	if (status != EFI_SUCCESS) {
+		efi_warn("Failed to allocate memory for RNG seed.\n");
+		goto err_warn;
+	}
+
+	status = efi_call_proto(rng, get_rng, &rng_algo_raw,
+				EFI_RANDOM_SEED_SIZE, seed->bits);
+
+	if (status == EFI_UNSUPPORTED)
+		/*
+		 * Use whatever algorithm we have available if the raw algorithm
+		 * is not implemented.
+		 */
+		status = efi_call_proto(rng, get_rng, NULL,
+					EFI_RANDOM_SEED_SIZE, seed->bits);
+
+	if (status != EFI_SUCCESS)
+		goto err_freepool;
+
+	seed->size = seed_size;
+	if (prev_seed_size)
+		memcpy(seed->bits + EFI_RANDOM_SEED_SIZE, prev_seed->bits,
+		       prev_seed_size);
+
+	status = efi_bs_call(install_configuration_table, &rng_table_guid, seed);
+	if (status != EFI_SUCCESS)
+		goto err_freepool;
+
+	if (prev_seed_size) {
+		/* wipe and free the old seed if we managed to install the new one */
+		memzero_explicit(prev_seed->bits, prev_seed_size);
+		efi_bs_call(free_pool, prev_seed);
+	}
+	return EFI_SUCCESS;
+
+err_freepool:
+	memzero_explicit(seed, struct_size(seed, bits, seed_size));
+	efi_bs_call(free_pool, seed);
+	efi_warn("Failed to obtain seed from EFI_RNG_PROTOCOL\n");
+err_warn:
+	if (prev_seed)
+		efi_warn("Retaining bootloader-supplied seed only");
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/randomalloc.c b/drivers/firmware/efi/libstub/randomalloc.c
new file mode 100644
index 000000000..724155b9e
--- /dev/null
+++ b/drivers/firmware/efi/libstub/randomalloc.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Linaro Ltd;  <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/efi.h>
+#include <linux/log2.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/*
+ * Return the number of slots covered by this entry, i.e., the number of
+ * addresses it covers that are suitably aligned and supply enough room
+ * for the allocation.
+ */
+static unsigned long get_entry_num_slots(efi_memory_desc_t *md,
+					 unsigned long size,
+					 unsigned long align_shift)
+{
+	unsigned long align = 1UL << align_shift;
+	u64 first_slot, last_slot, region_end;
+
+	if (md->type != EFI_CONVENTIONAL_MEMORY)
+		return 0;
+
+	if (efi_soft_reserve_enabled() &&
+	    (md->attribute & EFI_MEMORY_SP))
+		return 0;
+
+	region_end = min(md->phys_addr + md->num_pages * EFI_PAGE_SIZE - 1,
+			 (u64)ULONG_MAX);
+	if (region_end < size)
+		return 0;
+
+	first_slot = round_up(md->phys_addr, align);
+	last_slot = round_down(region_end - size + 1, align);
+
+	if (first_slot > last_slot)
+		return 0;
+
+	return ((unsigned long)(last_slot - first_slot) >> align_shift) + 1;
+}
+
+/*
+ * The UEFI memory descriptors have a virtual address field that is only used
+ * when installing the virtual mapping using SetVirtualAddressMap(). Since it
+ * is unused here, we can reuse it to keep track of each descriptor's slot
+ * count.
+ */
+#define MD_NUM_SLOTS(md)	((md)->virt_addr)
+
+efi_status_t efi_random_alloc(unsigned long size,
+			      unsigned long align,
+			      unsigned long *addr,
+			      unsigned long random_seed)
+{
+	unsigned long map_size, desc_size, total_slots = 0, target_slot;
+	unsigned long buff_size;
+	efi_status_t status;
+	efi_memory_desc_t *memory_map;
+	int map_offset;
+	struct efi_boot_memmap map;
+
+	map.map =	&memory_map;
+	map.map_size =	&map_size;
+	map.desc_size =	&desc_size;
+	map.desc_ver =	NULL;
+	map.key_ptr =	NULL;
+	map.buff_size =	&buff_size;
+
+	status = efi_get_memory_map(&map);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	size = round_up(size, EFI_ALLOC_ALIGN);
+
+	/* count the suitable slots in each memory map entry */
+	for (map_offset = 0; map_offset < map_size; map_offset += desc_size) {
+		efi_memory_desc_t *md = (void *)memory_map + map_offset;
+		unsigned long slots;
+
+		slots = get_entry_num_slots(md, size, ilog2(align));
+		MD_NUM_SLOTS(md) = slots;
+		total_slots += slots;
+	}
+
+	/* find a random number between 0 and total_slots */
+	target_slot = (total_slots * (u64)(random_seed & U32_MAX)) >> 32;
+
+	/*
+	 * target_slot is now a value in the range [0, total_slots), and so
+	 * it corresponds with exactly one of the suitable slots we recorded
+	 * when iterating over the memory map the first time around.
+	 *
+	 * So iterate over the memory map again, subtracting the number of
+	 * slots of each entry at each iteration, until we have found the entry
+	 * that covers our chosen slot. Use the residual value of target_slot
+	 * to calculate the randomly chosen address, and allocate it directly
+	 * using EFI_ALLOCATE_ADDRESS.
+	 */
+	for (map_offset = 0; map_offset < map_size; map_offset += desc_size) {
+		efi_memory_desc_t *md = (void *)memory_map + map_offset;
+		efi_physical_addr_t target;
+		unsigned long pages;
+
+		if (target_slot >= MD_NUM_SLOTS(md)) {
+			target_slot -= MD_NUM_SLOTS(md);
+			continue;
+		}
+
+		target = round_up(md->phys_addr, align) + target_slot * align;
+		pages = size / EFI_PAGE_SIZE;
+
+		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+				     EFI_LOADER_DATA, pages, &target);
+		if (status == EFI_SUCCESS)
+			*addr = target;
+		break;
+	}
+
+	efi_bs_call(free_pool, memory_map);
+
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/relocate.c b/drivers/firmware/efi/libstub/relocate.c
new file mode 100644
index 000000000..8ee9eb2b9
--- /dev/null
+++ b/drivers/firmware/efi/libstub/relocate.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/**
+ * efi_low_alloc_above() - allocate pages at or above given address
+ * @size:	size of the memory area to allocate
+ * @align:	minimum alignment of the allocated memory area. It should
+ *		a power of two.
+ * @addr:	on exit the address of the allocated memory
+ * @min:	minimum address to used for the memory allocation
+ *
+ * Allocate at the lowest possible address that is not below @min as
+ * EFI_LOADER_DATA. The allocated pages are aligned according to @align but at
+ * least EFI_ALLOC_ALIGN. The first allocated page will not below the address
+ * given by @min.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_low_alloc_above(unsigned long size, unsigned long align,
+				 unsigned long *addr, unsigned long min)
+{
+	unsigned long map_size, desc_size, buff_size;
+	efi_memory_desc_t *map;
+	efi_status_t status;
+	unsigned long nr_pages;
+	int i;
+	struct efi_boot_memmap boot_map;
+
+	boot_map.map		= &map;
+	boot_map.map_size	= &map_size;
+	boot_map.desc_size	= &desc_size;
+	boot_map.desc_ver	= NULL;
+	boot_map.key_ptr	= NULL;
+	boot_map.buff_size	= &buff_size;
+
+	status = efi_get_memory_map(&boot_map);
+	if (status != EFI_SUCCESS)
+		goto fail;
+
+	/*
+	 * Enforce minimum alignment that EFI or Linux requires when
+	 * requesting a specific address.  We are doing page-based (or
+	 * larger) allocations, and both the address and size must meet
+	 * alignment constraints.
+	 */
+	if (align < EFI_ALLOC_ALIGN)
+		align = EFI_ALLOC_ALIGN;
+
+	size = round_up(size, EFI_ALLOC_ALIGN);
+	nr_pages = size / EFI_PAGE_SIZE;
+	for (i = 0; i < map_size / desc_size; i++) {
+		efi_memory_desc_t *desc;
+		unsigned long m = (unsigned long)map;
+		u64 start, end;
+
+		desc = efi_early_memdesc_ptr(m, desc_size, i);
+
+		if (desc->type != EFI_CONVENTIONAL_MEMORY)
+			continue;
+
+		if (efi_soft_reserve_enabled() &&
+		    (desc->attribute & EFI_MEMORY_SP))
+			continue;
+
+		if (desc->num_pages < nr_pages)
+			continue;
+
+		start = desc->phys_addr;
+		end = start + desc->num_pages * EFI_PAGE_SIZE;
+
+		if (start < min)
+			start = min;
+
+		start = round_up(start, align);
+		if ((start + size) > end)
+			continue;
+
+		status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+				     EFI_LOADER_DATA, nr_pages, &start);
+		if (status == EFI_SUCCESS) {
+			*addr = start;
+			break;
+		}
+	}
+
+	if (i == map_size / desc_size)
+		status = EFI_NOT_FOUND;
+
+	efi_bs_call(free_pool, map);
+fail:
+	return status;
+}
+
+/**
+ * efi_relocate_kernel() - copy memory area
+ * @image_addr:		pointer to address of memory area to copy
+ * @image_size:		size of memory area to copy
+ * @alloc_size:		minimum size of memory to allocate, must be greater or
+ *			equal to image_size
+ * @preferred_addr:	preferred target address
+ * @alignment:		minimum alignment of the allocated memory area. It
+ *			should be a power of two.
+ * @min_addr:		minimum target address
+ *
+ * Copy a memory area to a newly allocated memory area aligned according
+ * to @alignment but at least EFI_ALLOC_ALIGN. If the preferred address
+ * is not available, the allocated address will not be below @min_addr.
+ * On exit, @image_addr is updated to the target copy address that was used.
+ *
+ * This function is used to copy the Linux kernel verbatim. It does not apply
+ * any relocation changes.
+ *
+ * Return:		status code
+ */
+efi_status_t efi_relocate_kernel(unsigned long *image_addr,
+				 unsigned long image_size,
+				 unsigned long alloc_size,
+				 unsigned long preferred_addr,
+				 unsigned long alignment,
+				 unsigned long min_addr)
+{
+	unsigned long cur_image_addr;
+	unsigned long new_addr = 0;
+	efi_status_t status;
+	unsigned long nr_pages;
+	efi_physical_addr_t efi_addr = preferred_addr;
+
+	if (!image_addr || !image_size || !alloc_size)
+		return EFI_INVALID_PARAMETER;
+	if (alloc_size < image_size)
+		return EFI_INVALID_PARAMETER;
+
+	cur_image_addr = *image_addr;
+
+	/*
+	 * The EFI firmware loader could have placed the kernel image
+	 * anywhere in memory, but the kernel has restrictions on the
+	 * max physical address it can run at.  Some architectures
+	 * also have a preferred address, so first try to relocate
+	 * to the preferred address.  If that fails, allocate as low
+	 * as possible while respecting the required alignment.
+	 */
+	nr_pages = round_up(alloc_size, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE;
+	status = efi_bs_call(allocate_pages, EFI_ALLOCATE_ADDRESS,
+			     EFI_LOADER_DATA, nr_pages, &efi_addr);
+	new_addr = efi_addr;
+	/*
+	 * If preferred address allocation failed allocate as low as
+	 * possible.
+	 */
+	if (status != EFI_SUCCESS) {
+		status = efi_low_alloc_above(alloc_size, alignment, &new_addr,
+					     min_addr);
+	}
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate usable memory for kernel.\n");
+		return status;
+	}
+
+	/*
+	 * We know source/dest won't overlap since both memory ranges
+	 * have been allocated by UEFI, so we can safely use memcpy.
+	 */
+	memcpy((void *)new_addr, (void *)cur_image_addr, image_size);
+
+	/* Return the new address of the relocated image. */
+	*image_addr = new_addr;
+
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
new file mode 100644
index 000000000..9c4608434
--- /dev/null
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+#include <linux/efi.h>
+#include <linux/libfdt.h>
+
+#include <asm/efi.h>
+#include <asm/sections.h>
+
+#include "efistub.h"
+
+/*
+ * RISC-V requires the kernel image to placed 2 MB aligned base for 64 bit and
+ * 4MB for 32 bit.
+ */
+#ifdef CONFIG_64BIT
+#define MIN_KIMG_ALIGN		SZ_2M
+#else
+#define MIN_KIMG_ALIGN		SZ_4M
+#endif
+
+typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
+
+static u32 hartid;
+
+static int get_boot_hartid_from_fdt(void)
+{
+	const void *fdt;
+	int chosen_node, len;
+	const fdt32_t *prop;
+
+	fdt = get_efi_config_table(DEVICE_TREE_GUID);
+	if (!fdt)
+		return -EINVAL;
+
+	chosen_node = fdt_path_offset(fdt, "/chosen");
+	if (chosen_node < 0)
+		return -EINVAL;
+
+	prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
+	if (!prop || len != sizeof(u32))
+		return -EINVAL;
+
+	hartid = fdt32_to_cpu(*prop);
+	return 0;
+}
+
+efi_status_t check_platform_features(void)
+{
+	int ret;
+
+	ret = get_boot_hartid_from_fdt();
+	if (ret) {
+		efi_err("/chosen/boot-hartid missing or invalid!\n");
+		return EFI_UNSUPPORTED;
+	}
+	return EFI_SUCCESS;
+}
+
+void __noreturn efi_enter_kernel(unsigned long entrypoint, unsigned long fdt,
+				 unsigned long fdt_size)
+{
+	unsigned long stext_offset = _start_kernel - _start;
+	unsigned long kernel_entry = entrypoint + stext_offset;
+	jump_kernel_func jump_kernel = (jump_kernel_func)kernel_entry;
+
+	/*
+	 * Jump to real kernel here with following constraints.
+	 * 1. MMU should be disabled.
+	 * 2. a0 should contain hartid
+	 * 3. a1 should DT address
+	 */
+	csr_write(CSR_SATP, 0);
+	jump_kernel(hartid, fdt);
+}
+
+efi_status_t handle_kernel_image(unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 efi_loaded_image_t *image)
+{
+	unsigned long kernel_size = 0;
+	unsigned long preferred_addr;
+	efi_status_t status;
+
+	kernel_size = _edata - _start;
+	*image_addr = (unsigned long)_start;
+	*image_size = kernel_size + (_end - _edata);
+
+	/*
+	 * RISC-V kernel maps PAGE_OFFSET virtual address to the same physical
+	 * address where kernel is booted. That's why kernel should boot from
+	 * as low as possible to avoid wastage of memory. Currently, dram_base
+	 * is occupied by the firmware. So the preferred address for kernel to
+	 * boot is next aligned address. If preferred address is not available,
+	 * relocate_kernel will fall back to efi_low_alloc_above to allocate
+	 * lowest possible memory region as long as the address and size meets
+	 * the alignment constraints.
+	 */
+	preferred_addr = MIN_KIMG_ALIGN;
+	status = efi_relocate_kernel(image_addr, kernel_size, *image_size,
+				     preferred_addr, MIN_KIMG_ALIGN, 0x0);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to relocate kernel\n");
+		*image_size = 0;
+	}
+	return status;
+}
diff --git a/drivers/firmware/efi/libstub/secureboot.c b/drivers/firmware/efi/libstub/secureboot.c
new file mode 100644
index 000000000..a2be3a71b
--- /dev/null
+++ b/drivers/firmware/efi/libstub/secureboot.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Secure boot handling.
+ *
+ * Copyright (C) 2013,2014 Linaro Limited
+ *     Roy Franz <roy.franz@linaro.org
+ * Copyright (C) 2013 Red Hat, Inc.
+ *     Mark Salter <msalter@redhat.com>
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+/* BIOS variables */
+static const efi_guid_t efi_variable_guid = EFI_GLOBAL_VARIABLE_GUID;
+static const efi_char16_t efi_SecureBoot_name[] = L"SecureBoot";
+static const efi_char16_t efi_SetupMode_name[] = L"SetupMode";
+
+/* SHIM variables */
+static const efi_guid_t shim_guid = EFI_SHIM_LOCK_GUID;
+static const efi_char16_t shim_MokSBState_name[] = L"MokSBStateRT";
+
+/*
+ * Determine whether we're in secure boot mode.
+ *
+ * Please keep the logic in sync with
+ * arch/x86/xen/efi.c:xen_efi_get_secureboot().
+ */
+enum efi_secureboot_mode efi_get_secureboot(void)
+{
+	u32 attr;
+	u8 secboot, setupmode, moksbstate;
+	unsigned long size;
+	efi_status_t status;
+
+	size = sizeof(secboot);
+	status = get_efi_var(efi_SecureBoot_name, &efi_variable_guid,
+			     NULL, &size, &secboot);
+	if (status == EFI_NOT_FOUND)
+		return efi_secureboot_mode_disabled;
+	if (status != EFI_SUCCESS)
+		goto out_efi_err;
+
+	size = sizeof(setupmode);
+	status = get_efi_var(efi_SetupMode_name, &efi_variable_guid,
+			     NULL, &size, &setupmode);
+	if (status != EFI_SUCCESS)
+		goto out_efi_err;
+
+	if (secboot == 0 || setupmode == 1)
+		return efi_secureboot_mode_disabled;
+
+	/*
+	 * See if a user has put the shim into insecure mode. If so, and if the
+	 * variable doesn't have the non-volatile attribute set, we might as
+	 * well honor that.
+	 */
+	size = sizeof(moksbstate);
+	status = get_efi_var(shim_MokSBState_name, &shim_guid,
+			     &attr, &size, &moksbstate);
+
+	/* If it fails, we don't care why. Default to secure */
+	if (status != EFI_SUCCESS)
+		goto secure_boot_enabled;
+	if (!(attr & EFI_VARIABLE_NON_VOLATILE) && moksbstate == 1)
+		return efi_secureboot_mode_disabled;
+
+secure_boot_enabled:
+	efi_info("UEFI Secure Boot is enabled.\n");
+	return efi_secureboot_mode_enabled;
+
+out_efi_err:
+	efi_err("Could not determine UEFI Secure Boot status.\n");
+	return efi_secureboot_mode_unknown;
+}
diff --git a/drivers/firmware/efi/libstub/skip_spaces.c b/drivers/firmware/efi/libstub/skip_spaces.c
new file mode 100644
index 000000000..159fb4e45
--- /dev/null
+++ b/drivers/firmware/efi/libstub/skip_spaces.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+char *skip_spaces(const char *str)
+{
+	while (isspace(*str))
+		++str;
+	return (char *)str;
+}
diff --git a/drivers/firmware/efi/libstub/string.c b/drivers/firmware/efi/libstub/string.c
new file mode 100644
index 000000000..5d13e4386
--- /dev/null
+++ b/drivers/firmware/efi/libstub/string.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Taken from:
+ *  linux/lib/string.c
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifndef __HAVE_ARCH_STRSTR
+/**
+ * strstr - Find the first substring in a %NUL terminated string
+ * @s1: The string to be searched
+ * @s2: The string to search for
+ */
+char *strstr(const char *s1, const char *s2)
+{
+	size_t l1, l2;
+
+	l2 = strlen(s2);
+	if (!l2)
+		return (char *)s1;
+	l1 = strlen(s1);
+	while (l1 >= l2) {
+		l1--;
+		if (!memcmp(s1, s2, l2))
+			return (char *)s1;
+		s1++;
+	}
+	return NULL;
+}
+#endif
+
+#ifndef __HAVE_ARCH_STRNCMP
+/**
+ * strncmp - Compare two length-limited strings
+ * @cs: One string
+ * @ct: Another string
+ * @count: The maximum number of bytes to compare
+ */
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+	unsigned char c1, c2;
+
+	while (count) {
+		c1 = *cs++;
+		c2 = *ct++;
+		if (c1 != c2)
+			return c1 < c2 ? -1 : 1;
+		if (!c1)
+			break;
+		count--;
+	}
+	return 0;
+}
+#endif
+
+/* Works only for digits and letters, but small and fast */
+#define TOLOWER(x) ((x) | 0x20)
+
+static unsigned int simple_guess_base(const char *cp)
+{
+	if (cp[0] == '0') {
+		if (TOLOWER(cp[1]) == 'x' && isxdigit(cp[2]))
+			return 16;
+		else
+			return 8;
+	} else {
+		return 10;
+	}
+}
+
+/**
+ * simple_strtoull - convert a string to an unsigned long long
+ * @cp: The start of the string
+ * @endp: A pointer to the end of the parsed string will be placed here
+ * @base: The number base to use
+ */
+
+unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base)
+{
+	unsigned long long result = 0;
+
+	if (!base)
+		base = simple_guess_base(cp);
+
+	if (base == 16 && cp[0] == '0' && TOLOWER(cp[1]) == 'x')
+		cp += 2;
+
+	while (isxdigit(*cp)) {
+		unsigned int value;
+
+		value = isdigit(*cp) ? *cp - '0' : TOLOWER(*cp) - 'a' + 10;
+		if (value >= base)
+			break;
+		result = result * base + value;
+		cp++;
+	}
+	if (endp)
+		*endp = (char *)cp;
+
+	return result;
+}
+
+long simple_strtol(const char *cp, char **endp, unsigned int base)
+{
+	if (*cp == '-')
+		return -simple_strtoull(cp + 1, endp, base);
+
+	return simple_strtoull(cp, endp, base);
+}
diff --git a/drivers/firmware/efi/libstub/tpm.c b/drivers/firmware/efi/libstub/tpm.c
new file mode 100644
index 000000000..7acbac16e
--- /dev/null
+++ b/drivers/firmware/efi/libstub/tpm.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TPM handling.
+ *
+ * Copyright (C) 2016 CoreOS, Inc
+ * Copyright (C) 2017 Google, Inc.
+ *     Matthew Garrett <mjg59@google.com>
+ *     Thiebaud Weksteen <tweek@google.com>
+ */
+#include <linux/efi.h>
+#include <linux/tpm_eventlog.h>
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+#ifdef CONFIG_RESET_ATTACK_MITIGATION
+static const efi_char16_t efi_MemoryOverWriteRequest_name[] =
+	L"MemoryOverwriteRequestControl";
+
+#define MEMORY_ONLY_RESET_CONTROL_GUID \
+	EFI_GUID(0xe20939be, 0x32d4, 0x41be, 0xa1, 0x50, 0x89, 0x7f, 0x85, 0xd4, 0x98, 0x29)
+
+/*
+ * Enable reboot attack mitigation. This requests that the firmware clear the
+ * RAM on next reboot before proceeding with boot, ensuring that any secrets
+ * are cleared. If userland has ensured that all secrets have been removed
+ * from RAM before reboot it can simply reset this variable.
+ */
+void efi_enable_reset_attack_mitigation(void)
+{
+	u8 val = 1;
+	efi_guid_t var_guid = MEMORY_ONLY_RESET_CONTROL_GUID;
+	efi_status_t status;
+	unsigned long datasize = 0;
+
+	status = get_efi_var(efi_MemoryOverWriteRequest_name, &var_guid,
+			     NULL, &datasize, NULL);
+
+	if (status == EFI_NOT_FOUND)
+		return;
+
+	set_efi_var(efi_MemoryOverWriteRequest_name, &var_guid,
+		    EFI_VARIABLE_NON_VOLATILE |
+		    EFI_VARIABLE_BOOTSERVICE_ACCESS |
+		    EFI_VARIABLE_RUNTIME_ACCESS, sizeof(val), &val);
+}
+
+#endif
+
+void efi_retrieve_tpm2_eventlog(void)
+{
+	efi_guid_t tcg2_guid = EFI_TCG2_PROTOCOL_GUID;
+	efi_guid_t linux_eventlog_guid = LINUX_EFI_TPM_EVENT_LOG_GUID;
+	efi_status_t status;
+	efi_physical_addr_t log_location = 0, log_last_entry = 0;
+	struct linux_efi_tpm_eventlog *log_tbl = NULL;
+	struct efi_tcg2_final_events_table *final_events_table = NULL;
+	unsigned long first_entry_addr, last_entry_addr;
+	size_t log_size, last_entry_size;
+	efi_bool_t truncated;
+	int version = EFI_TCG2_EVENT_LOG_FORMAT_TCG_2;
+	efi_tcg2_protocol_t *tcg2_protocol = NULL;
+	int final_events_size = 0;
+
+	status = efi_bs_call(locate_protocol, &tcg2_guid, NULL,
+			     (void **)&tcg2_protocol);
+	if (status != EFI_SUCCESS)
+		return;
+
+	status = efi_call_proto(tcg2_protocol, get_event_log, version,
+				&log_location, &log_last_entry, &truncated);
+
+	if (status != EFI_SUCCESS || !log_location) {
+		version = EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2;
+		status = efi_call_proto(tcg2_protocol, get_event_log, version,
+					&log_location, &log_last_entry,
+					&truncated);
+		if (status != EFI_SUCCESS || !log_location)
+			return;
+
+	}
+
+	first_entry_addr = (unsigned long) log_location;
+
+	/*
+	 * We populate the EFI table even if the logs are empty.
+	 */
+	if (!log_last_entry) {
+		log_size = 0;
+	} else {
+		last_entry_addr = (unsigned long) log_last_entry;
+		/*
+		 * get_event_log only returns the address of the last entry.
+		 * We need to calculate its size to deduce the full size of
+		 * the logs.
+		 */
+		if (version == EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
+			/*
+			 * The TCG2 log format has variable length entries,
+			 * and the information to decode the hash algorithms
+			 * back into a size is contained in the first entry -
+			 * pass a pointer to the final entry (to calculate its
+			 * size) and the first entry (so we know how long each
+			 * digest is)
+			 */
+			last_entry_size =
+				__calc_tpm2_event_size((void *)last_entry_addr,
+						    (void *)(long)log_location,
+						    false);
+		} else {
+			last_entry_size = sizeof(struct tcpa_event) +
+			   ((struct tcpa_event *) last_entry_addr)->event_size;
+		}
+		log_size = log_last_entry - log_location + last_entry_size;
+	}
+
+	/* Allocate space for the logs and copy them. */
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+			     sizeof(*log_tbl) + log_size, (void **)&log_tbl);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Unable to allocate memory for event log\n");
+		return;
+	}
+
+	/*
+	 * Figure out whether any events have already been logged to the
+	 * final events structure, and if so how much space they take up
+	 */
+	if (version == EFI_TCG2_EVENT_LOG_FORMAT_TCG_2)
+		final_events_table = get_efi_config_table(LINUX_EFI_TPM_FINAL_LOG_GUID);
+	if (final_events_table && final_events_table->nr_events) {
+		struct tcg_pcr_event2_head *header;
+		int offset;
+		void *data;
+		int event_size;
+		int i = final_events_table->nr_events;
+
+		data = (void *)final_events_table;
+		offset = sizeof(final_events_table->version) +
+			sizeof(final_events_table->nr_events);
+
+		while (i > 0) {
+			header = data + offset + final_events_size;
+			event_size = __calc_tpm2_event_size(header,
+						   (void *)(long)log_location,
+						   false);
+			final_events_size += event_size;
+			i--;
+		}
+	}
+
+	memset(log_tbl, 0, sizeof(*log_tbl) + log_size);
+	log_tbl->size = log_size;
+	log_tbl->final_events_preboot_size = final_events_size;
+	log_tbl->version = version;
+	memcpy(log_tbl->log, (void *) first_entry_addr, log_size);
+
+	status = efi_bs_call(install_configuration_table,
+			     &linux_eventlog_guid, log_tbl);
+	if (status != EFI_SUCCESS)
+		goto err_free;
+	return;
+
+err_free:
+	efi_bs_call(free_pool, log_tbl);
+}
diff --git a/drivers/firmware/efi/libstub/vsprintf.c b/drivers/firmware/efi/libstub/vsprintf.c
new file mode 100644
index 000000000..1088e288c
--- /dev/null
+++ b/drivers/firmware/efi/libstub/vsprintf.c
@@ -0,0 +1,564 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Oh, it's a waste of space, but oh-so-yummy for debugging.
+ */
+
+#include <stdarg.h>
+
+#include <linux/compiler.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+static
+int skip_atoi(const char **s)
+{
+	int i = 0;
+
+	while (isdigit(**s))
+		i = i * 10 + *((*s)++) - '0';
+	return i;
+}
+
+/*
+ * put_dec_full4 handles numbers in the range 0 <= r < 10000.
+ * The multiplier 0xccd is round(2^15/10), and the approximation
+ * r/10 == (r * 0xccd) >> 15 is exact for all r < 16389.
+ */
+static
+void put_dec_full4(char *end, unsigned int r)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		unsigned int q = (r * 0xccd) >> 15;
+		*--end = '0' + (r - q * 10);
+		r = q;
+	}
+	*--end = '0' + r;
+}
+
+/* put_dec is copied from lib/vsprintf.c with small modifications */
+
+/*
+ * Call put_dec_full4 on x % 10000, return x / 10000.
+ * The approximation x/10000 == (x * 0x346DC5D7) >> 43
+ * holds for all x < 1,128,869,999.  The largest value this
+ * helper will ever be asked to convert is 1,125,520,955.
+ * (second call in the put_dec code, assuming n is all-ones).
+ */
+static
+unsigned int put_dec_helper4(char *end, unsigned int x)
+{
+	unsigned int q = (x * 0x346DC5D7ULL) >> 43;
+
+	put_dec_full4(end, x - q * 10000);
+	return q;
+}
+
+/* Based on code by Douglas W. Jones found at
+ * <http://www.cs.uiowa.edu/~jones/bcd/decimal.html#sixtyfour>
+ * (with permission from the author).
+ * Performs no 64-bit division and hence should be fast on 32-bit machines.
+ */
+static
+char *put_dec(char *end, unsigned long long n)
+{
+	unsigned int d3, d2, d1, q, h;
+	char *p = end;
+
+	d1  = ((unsigned int)n >> 16); /* implicit "& 0xffff" */
+	h   = (n >> 32);
+	d2  = (h      ) & 0xffff;
+	d3  = (h >> 16); /* implicit "& 0xffff" */
+
+	/* n = 2^48 d3 + 2^32 d2 + 2^16 d1 + d0
+	     = 281_4749_7671_0656 d3 + 42_9496_7296 d2 + 6_5536 d1 + d0 */
+	q = 656 * d3 + 7296 * d2 + 5536 * d1 + ((unsigned int)n & 0xffff);
+	q = put_dec_helper4(p, q);
+	p -= 4;
+
+	q += 7671 * d3 + 9496 * d2 + 6 * d1;
+	q = put_dec_helper4(p, q);
+	p -= 4;
+
+	q += 4749 * d3 + 42 * d2;
+	q = put_dec_helper4(p, q);
+	p -= 4;
+
+	q += 281 * d3;
+	q = put_dec_helper4(p, q);
+	p -= 4;
+
+	put_dec_full4(p, q);
+	p -= 4;
+
+	/* strip off the extra 0's we printed */
+	while (p < end && *p == '0')
+		++p;
+
+	return p;
+}
+
+static
+char *number(char *end, unsigned long long num, int base, char locase)
+{
+	/*
+	 * locase = 0 or 0x20. ORing digits or letters with 'locase'
+	 * produces same digits or (maybe lowercased) letters
+	 */
+
+	/* we are called with base 8, 10 or 16, only, thus don't need "G..."  */
+	static const char digits[16] = "0123456789ABCDEF"; /* "GHIJKLMNOPQRSTUVWXYZ"; */
+
+	switch (base) {
+	case 10:
+		if (num != 0)
+			end = put_dec(end, num);
+		break;
+	case 8:
+		for (; num != 0; num >>= 3)
+			*--end = '0' + (num & 07);
+		break;
+	case 16:
+		for (; num != 0; num >>= 4)
+			*--end = digits[num & 0xf] | locase;
+		break;
+	default:
+		unreachable();
+	}
+
+	return end;
+}
+
+#define ZEROPAD	1		/* pad with zero */
+#define SIGN	2		/* unsigned/signed long */
+#define PLUS	4		/* show plus */
+#define SPACE	8		/* space if plus */
+#define LEFT	16		/* left justified */
+#define SMALL	32		/* Must be 32 == 0x20 */
+#define SPECIAL	64		/* 0x */
+#define WIDE	128		/* UTF-16 string */
+
+static
+int get_flags(const char **fmt)
+{
+	int flags = 0;
+
+	do {
+		switch (**fmt) {
+		case '-':
+			flags |= LEFT;
+			break;
+		case '+':
+			flags |= PLUS;
+			break;
+		case ' ':
+			flags |= SPACE;
+			break;
+		case '#':
+			flags |= SPECIAL;
+			break;
+		case '0':
+			flags |= ZEROPAD;
+			break;
+		default:
+			return flags;
+		}
+		++(*fmt);
+	} while (1);
+}
+
+static
+int get_int(const char **fmt, va_list *ap)
+{
+	if (isdigit(**fmt))
+		return skip_atoi(fmt);
+	if (**fmt == '*') {
+		++(*fmt);
+		/* it's the next argument */
+		return va_arg(*ap, int);
+	}
+	return 0;
+}
+
+static
+unsigned long long get_number(int sign, int qualifier, va_list *ap)
+{
+	if (sign) {
+		switch (qualifier) {
+		case 'L':
+			return va_arg(*ap, long long);
+		case 'l':
+			return va_arg(*ap, long);
+		case 'h':
+			return (short)va_arg(*ap, int);
+		case 'H':
+			return (signed char)va_arg(*ap, int);
+		default:
+			return va_arg(*ap, int);
+		};
+	} else {
+		switch (qualifier) {
+		case 'L':
+			return va_arg(*ap, unsigned long long);
+		case 'l':
+			return va_arg(*ap, unsigned long);
+		case 'h':
+			return (unsigned short)va_arg(*ap, int);
+		case 'H':
+			return (unsigned char)va_arg(*ap, int);
+		default:
+			return va_arg(*ap, unsigned int);
+		}
+	}
+}
+
+static
+char get_sign(long long *num, int flags)
+{
+	if (!(flags & SIGN))
+		return 0;
+	if (*num < 0) {
+		*num = -(*num);
+		return '-';
+	}
+	if (flags & PLUS)
+		return '+';
+	if (flags & SPACE)
+		return ' ';
+	return 0;
+}
+
+static
+size_t utf16s_utf8nlen(const u16 *s16, size_t maxlen)
+{
+	size_t len, clen;
+
+	for (len = 0; len < maxlen && *s16; len += clen) {
+		u16 c0 = *s16++;
+
+		/* First, get the length for a BMP character */
+		clen = 1 + (c0 >= 0x80) + (c0 >= 0x800);
+		if (len + clen > maxlen)
+			break;
+		/*
+		 * If this is a high surrogate, and we're already at maxlen, we
+		 * can't include the character if it's a valid surrogate pair.
+		 * Avoid accessing one extra word just to check if it's valid
+		 * or not.
+		 */
+		if ((c0 & 0xfc00) == 0xd800) {
+			if (len + clen == maxlen)
+				break;
+			if ((*s16 & 0xfc00) == 0xdc00) {
+				++s16;
+				++clen;
+			}
+		}
+	}
+
+	return len;
+}
+
+static
+u32 utf16_to_utf32(const u16 **s16)
+{
+	u16 c0, c1;
+
+	c0 = *(*s16)++;
+	/* not a surrogate */
+	if ((c0 & 0xf800) != 0xd800)
+		return c0;
+	/* invalid: low surrogate instead of high */
+	if (c0 & 0x0400)
+		return 0xfffd;
+	c1 = **s16;
+	/* invalid: missing low surrogate */
+	if ((c1 & 0xfc00) != 0xdc00)
+		return 0xfffd;
+	/* valid surrogate pair */
+	++(*s16);
+	return (0x10000 - (0xd800 << 10) - 0xdc00) + (c0 << 10) + c1;
+}
+
+#define PUTC(c) \
+do {				\
+	if (pos < size)		\
+		buf[pos] = (c);	\
+	++pos;			\
+} while (0);
+
+int vsnprintf(char *buf, size_t size, const char *fmt, va_list ap)
+{
+	/* The maximum space required is to print a 64-bit number in octal */
+	char tmp[(sizeof(unsigned long long) * 8 + 2) / 3];
+	char *tmp_end = &tmp[ARRAY_SIZE(tmp)];
+	long long num;
+	int base;
+	const char *s;
+	size_t len, pos;
+	char sign;
+
+	int flags;		/* flags to number() */
+
+	int field_width;	/* width of output field */
+	int precision;		/* min. # of digits for integers; max
+				   number of chars for from string */
+	int qualifier;		/* 'h', 'hh', 'l' or 'll' for integer fields */
+
+	va_list args;
+
+	/*
+	 * We want to pass our input va_list to helper functions by reference,
+	 * but there's an annoying edge case. If va_list was originally passed
+	 * to us by value, we could just pass &ap down to the helpers. This is
+	 * the case on, for example, X86_32.
+	 * However, on X86_64 (and possibly others), va_list is actually a
+	 * size-1 array containing a structure. Our function parameter ap has
+	 * decayed from T[1] to T*, and &ap has type T** rather than T(*)[1],
+	 * which is what will be expected by a function taking a va_list *
+	 * parameter.
+	 * One standard way to solve this mess is by creating a copy in a local
+	 * variable of type va_list and then passing a pointer to that local
+	 * copy instead, which is what we do here.
+	 */
+	va_copy(args, ap);
+
+	for (pos = 0; *fmt; ++fmt) {
+		if (*fmt != '%' || *++fmt == '%') {
+			PUTC(*fmt);
+			continue;
+		}
+
+		/* process flags */
+		flags = get_flags(&fmt);
+
+		/* get field width */
+		field_width = get_int(&fmt, &args);
+		if (field_width < 0) {
+			field_width = -field_width;
+			flags |= LEFT;
+		}
+
+		if (flags & LEFT)
+			flags &= ~ZEROPAD;
+
+		/* get the precision */
+		precision = -1;
+		if (*fmt == '.') {
+			++fmt;
+			precision = get_int(&fmt, &args);
+			if (precision >= 0)
+				flags &= ~ZEROPAD;
+		}
+
+		/* get the conversion qualifier */
+		qualifier = -1;
+		if (*fmt == 'h' || *fmt == 'l') {
+			qualifier = *fmt;
+			++fmt;
+			if (qualifier == *fmt) {
+				qualifier -= 'a'-'A';
+				++fmt;
+			}
+		}
+
+		sign = 0;
+
+		switch (*fmt) {
+		case 'c':
+			flags &= LEFT;
+			s = tmp;
+			if (qualifier == 'l') {
+				((u16 *)tmp)[0] = (u16)va_arg(args, unsigned int);
+				((u16 *)tmp)[1] = L'\0';
+				precision = INT_MAX;
+				goto wstring;
+			} else {
+				tmp[0] = (unsigned char)va_arg(args, int);
+				precision = len = 1;
+			}
+			goto output;
+
+		case 's':
+			flags &= LEFT;
+			if (precision < 0)
+				precision = INT_MAX;
+			s = va_arg(args, void *);
+			if (!s)
+				s = precision < 6 ? "" : "(null)";
+			else if (qualifier == 'l') {
+		wstring:
+				flags |= WIDE;
+				precision = len = utf16s_utf8nlen((const u16 *)s, precision);
+				goto output;
+			}
+			precision = len = strnlen(s, precision);
+			goto output;
+
+			/* integer number formats - set up the flags and "break" */
+		case 'o':
+			base = 8;
+			break;
+
+		case 'p':
+			if (precision < 0)
+				precision = 2 * sizeof(void *);
+			fallthrough;
+		case 'x':
+			flags |= SMALL;
+			fallthrough;
+		case 'X':
+			base = 16;
+			break;
+
+		case 'd':
+		case 'i':
+			flags |= SIGN;
+			fallthrough;
+		case 'u':
+			flags &= ~SPECIAL;
+			base = 10;
+			break;
+
+		default:
+			/*
+			 * Bail out if the conversion specifier is invalid.
+			 * There's probably a typo in the format string and the
+			 * remaining specifiers are unlikely to match up with
+			 * the arguments.
+			 */
+			goto fail;
+		}
+		if (*fmt == 'p') {
+			num = (unsigned long)va_arg(args, void *);
+		} else {
+			num = get_number(flags & SIGN, qualifier, &args);
+		}
+
+		sign = get_sign(&num, flags);
+		if (sign)
+			--field_width;
+
+		s = number(tmp_end, num, base, flags & SMALL);
+		len = tmp_end - s;
+		/* default precision is 1 */
+		if (precision < 0)
+			precision = 1;
+		/* precision is minimum number of digits to print */
+		if (precision < len)
+			precision = len;
+		if (flags & SPECIAL) {
+			/*
+			 * For octal, a leading 0 is printed only if necessary,
+			 * i.e. if it's not already there because of the
+			 * precision.
+			 */
+			if (base == 8 && precision == len)
+				++precision;
+			/*
+			 * For hexadecimal, the leading 0x is skipped if the
+			 * output is empty, i.e. both the number and the
+			 * precision are 0.
+			 */
+			if (base == 16 && precision > 0)
+				field_width -= 2;
+			else
+				flags &= ~SPECIAL;
+		}
+		/*
+		 * For zero padding, increase the precision to fill the field
+		 * width.
+		 */
+		if ((flags & ZEROPAD) && field_width > precision)
+			precision = field_width;
+
+output:
+		/* Calculate the padding necessary */
+		field_width -= precision;
+		/* Leading padding with ' ' */
+		if (!(flags & LEFT))
+			while (field_width-- > 0)
+				PUTC(' ');
+		/* sign */
+		if (sign)
+			PUTC(sign);
+		/* 0x/0X for hexadecimal */
+		if (flags & SPECIAL) {
+			PUTC('0');
+			PUTC( 'X' | (flags & SMALL));
+		}
+		/* Zero padding and excess precision */
+		while (precision-- > len)
+			PUTC('0');
+		/* Actual output */
+		if (flags & WIDE) {
+			const u16 *ws = (const u16 *)s;
+
+			while (len-- > 0) {
+				u32 c32 = utf16_to_utf32(&ws);
+				u8 *s8;
+				size_t clen;
+
+				if (c32 < 0x80) {
+					PUTC(c32);
+					continue;
+				}
+
+				/* Number of trailing octets */
+				clen = 1 + (c32 >= 0x800) + (c32 >= 0x10000);
+
+				len -= clen;
+				s8 = (u8 *)&buf[pos];
+
+				/* Avoid writing partial character */
+				PUTC('\0');
+				pos += clen;
+				if (pos >= size)
+					continue;
+
+				/* Set high bits of leading octet */
+				*s8 = (0xf00 >> 1) >> clen;
+				/* Write trailing octets in reverse order */
+				for (s8 += clen; clen; --clen, c32 >>= 6)
+					*s8-- = 0x80 | (c32 & 0x3f);
+				/* Set low bits of leading octet */
+				*s8 |= c32;
+			}
+		} else {
+			while (len-- > 0)
+				PUTC(*s++);
+		}
+		/* Trailing padding with ' ' */
+		while (field_width-- > 0)
+			PUTC(' ');
+	}
+fail:
+	va_end(args);
+
+	if (size)
+		buf[min(pos, size-1)] = '\0';
+
+	return pos;
+}
+
+int snprintf(char *buf, size_t size, const char *fmt, ...)
+{
+	va_list args;
+	int i;
+
+	va_start(args, fmt);
+	i = vsnprintf(buf, size, fmt, args);
+	va_end(args);
+	return i;
+}
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
new file mode 100644
index 000000000..9f998e6bf
--- /dev/null
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -0,0 +1,817 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2011 Intel Corporation; author Matt Fleming
+ *
+ * ----------------------------------------------------------------------- */
+
+#include <linux/efi.h>
+#include <linux/pci.h>
+#include <linux/stddef.h>
+
+#include <asm/efi.h>
+#include <asm/e820/types.h>
+#include <asm/setup.h>
+#include <asm/desc.h>
+#include <asm/boot.h>
+
+#include "efistub.h"
+
+/* Maximum physical address for 64-bit kernel with 4-level paging */
+#define MAXMEM_X86_64_4LEVEL (1ull << 46)
+
+const efi_system_table_t *efi_system_table;
+extern u32 image_offset;
+static efi_loaded_image_t *image = NULL;
+
+static efi_status_t
+preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
+{
+	struct pci_setup_rom *rom = NULL;
+	efi_status_t status;
+	unsigned long size;
+	uint64_t romsize;
+	void *romimage;
+
+	/*
+	 * Some firmware images contain EFI function pointers at the place where
+	 * the romimage and romsize fields are supposed to be. Typically the EFI
+	 * code is mapped at high addresses, translating to an unrealistically
+	 * large romsize. The UEFI spec limits the size of option ROMs to 16
+	 * MiB so we reject any ROMs over 16 MiB in size to catch this.
+	 */
+	romimage = efi_table_attr(pci, romimage);
+	romsize = efi_table_attr(pci, romsize);
+	if (!romimage || !romsize || romsize > SZ_16M)
+		return EFI_INVALID_PARAMETER;
+
+	size = romsize + sizeof(*rom);
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+			     (void **)&rom);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate memory for 'rom'\n");
+		return status;
+	}
+
+	memset(rom, 0, sizeof(*rom));
+
+	rom->data.type	= SETUP_PCI;
+	rom->data.len	= size - sizeof(struct setup_data);
+	rom->data.next	= 0;
+	rom->pcilen	= romsize;
+	*__rom = rom;
+
+	status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
+				PCI_VENDOR_ID, 1, &rom->vendor);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to read rom->vendor\n");
+		goto free_struct;
+	}
+
+	status = efi_call_proto(pci, pci.read, EfiPciIoWidthUint16,
+				PCI_DEVICE_ID, 1, &rom->devid);
+
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to read rom->devid\n");
+		goto free_struct;
+	}
+
+	status = efi_call_proto(pci, get_location, &rom->segment, &rom->bus,
+				&rom->device, &rom->function);
+
+	if (status != EFI_SUCCESS)
+		goto free_struct;
+
+	memcpy(rom->romdata, romimage, romsize);
+	return status;
+
+free_struct:
+	efi_bs_call(free_pool, rom);
+	return status;
+}
+
+/*
+ * There's no way to return an informative status from this function,
+ * because any analysis (and printing of error messages) needs to be
+ * done directly at the EFI function call-site.
+ *
+ * For example, EFI_INVALID_PARAMETER could indicate a bug or maybe we
+ * just didn't find any PCI devices, but there's no way to tell outside
+ * the context of the call.
+ */
+static void setup_efi_pci(struct boot_params *params)
+{
+	efi_status_t status;
+	void **pci_handle = NULL;
+	efi_guid_t pci_proto = EFI_PCI_IO_PROTOCOL_GUID;
+	unsigned long size = 0;
+	struct setup_data *data;
+	efi_handle_t h;
+	int i;
+
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+			     &pci_proto, NULL, &size, pci_handle);
+
+	if (status == EFI_BUFFER_TOO_SMALL) {
+		status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+				     (void **)&pci_handle);
+
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to allocate memory for 'pci_handle'\n");
+			return;
+		}
+
+		status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+				     &pci_proto, NULL, &size, pci_handle);
+	}
+
+	if (status != EFI_SUCCESS)
+		goto free_handle;
+
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
+
+	while (data && data->next)
+		data = (struct setup_data *)(unsigned long)data->next;
+
+	for_each_efi_handle(h, pci_handle, size, i) {
+		efi_pci_io_protocol_t *pci = NULL;
+		struct pci_setup_rom *rom;
+
+		status = efi_bs_call(handle_protocol, h, &pci_proto,
+				     (void **)&pci);
+		if (status != EFI_SUCCESS || !pci)
+			continue;
+
+		status = preserve_pci_rom_image(pci, &rom);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		if (data)
+			data->next = (unsigned long)rom;
+		else
+			params->hdr.setup_data = (unsigned long)rom;
+
+		data = (struct setup_data *)rom;
+	}
+
+free_handle:
+	efi_bs_call(free_pool, pci_handle);
+}
+
+static void retrieve_apple_device_properties(struct boot_params *boot_params)
+{
+	efi_guid_t guid = APPLE_PROPERTIES_PROTOCOL_GUID;
+	struct setup_data *data, *new;
+	efi_status_t status;
+	u32 size = 0;
+	apple_properties_protocol_t *p;
+
+	status = efi_bs_call(locate_protocol, &guid, NULL, (void **)&p);
+	if (status != EFI_SUCCESS)
+		return;
+
+	if (efi_table_attr(p, version) != 0x10000) {
+		efi_err("Unsupported properties proto version\n");
+		return;
+	}
+
+	efi_call_proto(p, get_all, NULL, &size);
+	if (!size)
+		return;
+
+	do {
+		status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
+				     size + sizeof(struct setup_data),
+				     (void **)&new);
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to allocate memory for 'properties'\n");
+			return;
+		}
+
+		status = efi_call_proto(p, get_all, new->data, &size);
+
+		if (status == EFI_BUFFER_TOO_SMALL)
+			efi_bs_call(free_pool, new);
+	} while (status == EFI_BUFFER_TOO_SMALL);
+
+	new->type = SETUP_APPLE_PROPERTIES;
+	new->len  = size;
+	new->next = 0;
+
+	data = (struct setup_data *)(unsigned long)boot_params->hdr.setup_data;
+	if (!data) {
+		boot_params->hdr.setup_data = (unsigned long)new;
+	} else {
+		while (data->next)
+			data = (struct setup_data *)(unsigned long)data->next;
+		data->next = (unsigned long)new;
+	}
+}
+
+static const efi_char16_t apple[] = L"Apple";
+
+static void setup_quirks(struct boot_params *boot_params)
+{
+	efi_char16_t *fw_vendor = (efi_char16_t *)(unsigned long)
+		efi_table_attr(efi_system_table, fw_vendor);
+
+	if (!memcmp(fw_vendor, apple, sizeof(apple))) {
+		if (IS_ENABLED(CONFIG_APPLE_PROPERTIES))
+			retrieve_apple_device_properties(boot_params);
+	}
+}
+
+/*
+ * See if we have Universal Graphics Adapter (UGA) protocol
+ */
+static efi_status_t
+setup_uga(struct screen_info *si, efi_guid_t *uga_proto, unsigned long size)
+{
+	efi_status_t status;
+	u32 width, height;
+	void **uga_handle = NULL;
+	efi_uga_draw_protocol_t *uga = NULL, *first_uga;
+	efi_handle_t handle;
+	int i;
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+			     (void **)&uga_handle);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+			     uga_proto, NULL, &size, uga_handle);
+	if (status != EFI_SUCCESS)
+		goto free_handle;
+
+	height = 0;
+	width = 0;
+
+	first_uga = NULL;
+	for_each_efi_handle(handle, uga_handle, size, i) {
+		efi_guid_t pciio_proto = EFI_PCI_IO_PROTOCOL_GUID;
+		u32 w, h, depth, refresh;
+		void *pciio;
+
+		status = efi_bs_call(handle_protocol, handle, uga_proto,
+				     (void **)&uga);
+		if (status != EFI_SUCCESS)
+			continue;
+
+		pciio = NULL;
+		efi_bs_call(handle_protocol, handle, &pciio_proto, &pciio);
+
+		status = efi_call_proto(uga, get_mode, &w, &h, &depth, &refresh);
+		if (status == EFI_SUCCESS && (!first_uga || pciio)) {
+			width = w;
+			height = h;
+
+			/*
+			 * Once we've found a UGA supporting PCIIO,
+			 * don't bother looking any further.
+			 */
+			if (pciio)
+				break;
+
+			first_uga = uga;
+		}
+	}
+
+	if (!width && !height)
+		goto free_handle;
+
+	/* EFI framebuffer */
+	si->orig_video_isVGA	= VIDEO_TYPE_EFI;
+
+	si->lfb_depth		= 32;
+	si->lfb_width		= width;
+	si->lfb_height		= height;
+
+	si->red_size		= 8;
+	si->red_pos		= 16;
+	si->green_size		= 8;
+	si->green_pos		= 8;
+	si->blue_size		= 8;
+	si->blue_pos		= 0;
+	si->rsvd_size		= 8;
+	si->rsvd_pos		= 24;
+
+free_handle:
+	efi_bs_call(free_pool, uga_handle);
+
+	return status;
+}
+
+static void setup_graphics(struct boot_params *boot_params)
+{
+	efi_guid_t graphics_proto = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID;
+	struct screen_info *si;
+	efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
+	efi_status_t status;
+	unsigned long size;
+	void **gop_handle = NULL;
+	void **uga_handle = NULL;
+
+	si = &boot_params->screen_info;
+	memset(si, 0, sizeof(*si));
+
+	size = 0;
+	status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+			     &graphics_proto, NULL, &size, gop_handle);
+	if (status == EFI_BUFFER_TOO_SMALL)
+		status = efi_setup_gop(si, &graphics_proto, size);
+
+	if (status != EFI_SUCCESS) {
+		size = 0;
+		status = efi_bs_call(locate_handle, EFI_LOCATE_BY_PROTOCOL,
+				     &uga_proto, NULL, &size, uga_handle);
+		if (status == EFI_BUFFER_TOO_SMALL)
+			setup_uga(si, &uga_proto, size);
+	}
+}
+
+
+static void __noreturn efi_exit(efi_handle_t handle, efi_status_t status)
+{
+	efi_bs_call(exit, handle, status, 0, NULL);
+	for(;;)
+		asm("hlt");
+}
+
+void startup_32(struct boot_params *boot_params);
+
+void __noreturn efi_stub_entry(efi_handle_t handle,
+			       efi_system_table_t *sys_table_arg,
+			       struct boot_params *boot_params);
+
+/*
+ * Because the x86 boot code expects to be passed a boot_params we
+ * need to create one ourselves (usually the bootloader would create
+ * one for us).
+ */
+efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
+				   efi_system_table_t *sys_table_arg)
+{
+	struct boot_params *boot_params;
+	struct setup_header *hdr;
+	void *image_base;
+	efi_guid_t proto = LOADED_IMAGE_PROTOCOL_GUID;
+	int options_size = 0;
+	efi_status_t status;
+	char *cmdline_ptr;
+
+	efi_system_table = sys_table_arg;
+
+	/* Check if we were booted by the EFI firmware */
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+		efi_exit(handle, EFI_INVALID_PARAMETER);
+
+	status = efi_bs_call(handle_protocol, handle, &proto, (void **)&image);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to get handle for LOADED_IMAGE_PROTOCOL\n");
+		efi_exit(handle, status);
+	}
+
+	image_base = efi_table_attr(image, image_base);
+	image_offset = (void *)startup_32 - image_base;
+
+	status = efi_allocate_pages(sizeof(struct boot_params),
+				    (unsigned long *)&boot_params, ULONG_MAX);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to allocate lowmem for boot params\n");
+		efi_exit(handle, status);
+	}
+
+	memset(boot_params, 0x0, sizeof(struct boot_params));
+
+	hdr = &boot_params->hdr;
+
+	/* Copy the setup header from the second sector to boot_params */
+	memcpy(&hdr->jump, image_base + 512,
+	       sizeof(struct setup_header) - offsetof(struct setup_header, jump));
+
+	/*
+	 * Fill out some of the header fields ourselves because the
+	 * EFI firmware loader doesn't load the first sector.
+	 */
+	hdr->root_flags	= 1;
+	hdr->vid_mode	= 0xffff;
+	hdr->boot_flag	= 0xAA55;
+
+	hdr->type_of_loader = 0x21;
+
+	/* Convert unicode cmdline to ascii */
+	cmdline_ptr = efi_convert_cmdline(image, &options_size);
+	if (!cmdline_ptr)
+		goto fail;
+
+	efi_set_u64_split((unsigned long)cmdline_ptr,
+			  &hdr->cmd_line_ptr, &boot_params->ext_cmd_line_ptr);
+
+	hdr->ramdisk_image = 0;
+	hdr->ramdisk_size = 0;
+
+	/*
+	 * Disregard any setup data that was provided by the bootloader:
+	 * setup_data could be pointing anywhere, and we have no way of
+	 * authenticating or validating the payload.
+	 */
+	hdr->setup_data = 0;
+
+	efi_stub_entry(handle, sys_table_arg, boot_params);
+	/* not reached */
+
+fail:
+	efi_free(sizeof(struct boot_params), (unsigned long)boot_params);
+
+	efi_exit(handle, status);
+}
+
+static void add_e820ext(struct boot_params *params,
+			struct setup_data *e820ext, u32 nr_entries)
+{
+	struct setup_data *data;
+
+	e820ext->type = SETUP_E820_EXT;
+	e820ext->len  = nr_entries * sizeof(struct boot_e820_entry);
+	e820ext->next = 0;
+
+	data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
+
+	while (data && data->next)
+		data = (struct setup_data *)(unsigned long)data->next;
+
+	if (data)
+		data->next = (unsigned long)e820ext;
+	else
+		params->hdr.setup_data = (unsigned long)e820ext;
+}
+
+static efi_status_t
+setup_e820(struct boot_params *params, struct setup_data *e820ext, u32 e820ext_size)
+{
+	struct boot_e820_entry *entry = params->e820_table;
+	struct efi_info *efi = &params->efi_info;
+	struct boot_e820_entry *prev = NULL;
+	u32 nr_entries;
+	u32 nr_desc;
+	int i;
+
+	nr_entries = 0;
+	nr_desc = efi->efi_memmap_size / efi->efi_memdesc_size;
+
+	for (i = 0; i < nr_desc; i++) {
+		efi_memory_desc_t *d;
+		unsigned int e820_type = 0;
+		unsigned long m = efi->efi_memmap;
+
+#ifdef CONFIG_X86_64
+		m |= (u64)efi->efi_memmap_hi << 32;
+#endif
+
+		d = efi_early_memdesc_ptr(m, efi->efi_memdesc_size, i);
+		switch (d->type) {
+		case EFI_RESERVED_TYPE:
+		case EFI_RUNTIME_SERVICES_CODE:
+		case EFI_RUNTIME_SERVICES_DATA:
+		case EFI_MEMORY_MAPPED_IO:
+		case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+		case EFI_PAL_CODE:
+			e820_type = E820_TYPE_RESERVED;
+			break;
+
+		case EFI_UNUSABLE_MEMORY:
+			e820_type = E820_TYPE_UNUSABLE;
+			break;
+
+		case EFI_ACPI_RECLAIM_MEMORY:
+			e820_type = E820_TYPE_ACPI;
+			break;
+
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_CONVENTIONAL_MEMORY:
+			if (efi_soft_reserve_enabled() &&
+			    (d->attribute & EFI_MEMORY_SP))
+				e820_type = E820_TYPE_SOFT_RESERVED;
+			else
+				e820_type = E820_TYPE_RAM;
+			break;
+
+		case EFI_ACPI_MEMORY_NVS:
+			e820_type = E820_TYPE_NVS;
+			break;
+
+		case EFI_PERSISTENT_MEMORY:
+			e820_type = E820_TYPE_PMEM;
+			break;
+
+		default:
+			continue;
+		}
+
+		/* Merge adjacent mappings */
+		if (prev && prev->type == e820_type &&
+		    (prev->addr + prev->size) == d->phys_addr) {
+			prev->size += d->num_pages << 12;
+			continue;
+		}
+
+		if (nr_entries == ARRAY_SIZE(params->e820_table)) {
+			u32 need = (nr_desc - i) * sizeof(struct e820_entry) +
+				   sizeof(struct setup_data);
+
+			if (!e820ext || e820ext_size < need)
+				return EFI_BUFFER_TOO_SMALL;
+
+			/* boot_params map full, switch to e820 extended */
+			entry = (struct boot_e820_entry *)e820ext->data;
+		}
+
+		entry->addr = d->phys_addr;
+		entry->size = d->num_pages << PAGE_SHIFT;
+		entry->type = e820_type;
+		prev = entry++;
+		nr_entries++;
+	}
+
+	if (nr_entries > ARRAY_SIZE(params->e820_table)) {
+		u32 nr_e820ext = nr_entries - ARRAY_SIZE(params->e820_table);
+
+		add_e820ext(params, e820ext, nr_e820ext);
+		nr_entries -= nr_e820ext;
+	}
+
+	params->e820_entries = (u8)nr_entries;
+
+	return EFI_SUCCESS;
+}
+
+static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext,
+				  u32 *e820ext_size)
+{
+	efi_status_t status;
+	unsigned long size;
+
+	size = sizeof(struct setup_data) +
+		sizeof(struct e820_entry) * nr_desc;
+
+	if (*e820ext) {
+		efi_bs_call(free_pool, *e820ext);
+		*e820ext = NULL;
+		*e820ext_size = 0;
+	}
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+			     (void **)e820ext);
+	if (status == EFI_SUCCESS)
+		*e820ext_size = size;
+
+	return status;
+}
+
+static efi_status_t allocate_e820(struct boot_params *params,
+				  struct setup_data **e820ext,
+				  u32 *e820ext_size)
+{
+	unsigned long map_size, desc_size, map_key;
+	efi_status_t status;
+	__u32 nr_desc, desc_version;
+
+	/* Only need the size of the mem map and size of each mem descriptor */
+	map_size = 0;
+	status = efi_bs_call(get_memory_map, &map_size, NULL, &map_key,
+			     &desc_size, &desc_version);
+	if (status != EFI_BUFFER_TOO_SMALL)
+		return (status != EFI_SUCCESS) ? status : EFI_UNSUPPORTED;
+
+	nr_desc = map_size / desc_size + EFI_MMAP_NR_SLACK_SLOTS;
+
+	if (nr_desc > ARRAY_SIZE(params->e820_table)) {
+		u32 nr_e820ext = nr_desc - ARRAY_SIZE(params->e820_table);
+
+		status = alloc_e820ext(nr_e820ext, e820ext, e820ext_size);
+		if (status != EFI_SUCCESS)
+			return status;
+	}
+
+	return EFI_SUCCESS;
+}
+
+struct exit_boot_struct {
+	struct boot_params	*boot_params;
+	struct efi_info		*efi;
+};
+
+static efi_status_t exit_boot_func(struct efi_boot_memmap *map,
+				   void *priv)
+{
+	const char *signature;
+	struct exit_boot_struct *p = priv;
+
+	signature = efi_is_64bit() ? EFI64_LOADER_SIGNATURE
+				   : EFI32_LOADER_SIGNATURE;
+	memcpy(&p->efi->efi_loader_signature, signature, sizeof(__u32));
+
+	efi_set_u64_split((unsigned long)efi_system_table,
+			  &p->efi->efi_systab, &p->efi->efi_systab_hi);
+	p->efi->efi_memdesc_size	= *map->desc_size;
+	p->efi->efi_memdesc_version	= *map->desc_ver;
+	efi_set_u64_split((unsigned long)*map->map,
+			  &p->efi->efi_memmap, &p->efi->efi_memmap_hi);
+	p->efi->efi_memmap_size		= *map->map_size;
+
+	return EFI_SUCCESS;
+}
+
+static efi_status_t exit_boot(struct boot_params *boot_params, void *handle)
+{
+	unsigned long map_sz, key, desc_size, buff_size;
+	efi_memory_desc_t *mem_map;
+	struct setup_data *e820ext = NULL;
+	__u32 e820ext_size = 0;
+	efi_status_t status;
+	__u32 desc_version;
+	struct efi_boot_memmap map;
+	struct exit_boot_struct priv;
+
+	map.map			= &mem_map;
+	map.map_size		= &map_sz;
+	map.desc_size		= &desc_size;
+	map.desc_ver		= &desc_version;
+	map.key_ptr		= &key;
+	map.buff_size		= &buff_size;
+	priv.boot_params	= boot_params;
+	priv.efi		= &boot_params->efi_info;
+
+	status = allocate_e820(boot_params, &e820ext, &e820ext_size);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	/* Might as well exit boot services now */
+	status = efi_exit_boot_services(handle, &map, &priv, exit_boot_func);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	/* Historic? */
+	boot_params->alt_mem_k	= 32 * 1024;
+
+	status = setup_e820(boot_params, e820ext, e820ext_size);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	return EFI_SUCCESS;
+}
+
+/*
+ * On success, we return the address of startup_32, which has potentially been
+ * relocated by efi_relocate_kernel.
+ * On failure, we exit to the firmware via efi_exit instead of returning.
+ */
+unsigned long efi_main(efi_handle_t handle,
+			     efi_system_table_t *sys_table_arg,
+			     struct boot_params *boot_params)
+{
+	unsigned long bzimage_addr = (unsigned long)startup_32;
+	unsigned long buffer_start, buffer_end;
+	struct setup_header *hdr = &boot_params->hdr;
+	efi_status_t status;
+
+	efi_system_table = sys_table_arg;
+
+	/* Check if we were booted by the EFI firmware */
+	if (efi_system_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
+		efi_exit(handle, EFI_INVALID_PARAMETER);
+
+	/*
+	 * If the kernel isn't already loaded at a suitable address,
+	 * relocate it.
+	 *
+	 * It must be loaded above LOAD_PHYSICAL_ADDR.
+	 *
+	 * The maximum address for 64-bit is 1 << 46 for 4-level paging. This
+	 * is defined as the macro MAXMEM, but unfortunately that is not a
+	 * compile-time constant if 5-level paging is configured, so we instead
+	 * define our own macro for use here.
+	 *
+	 * For 32-bit, the maximum address is complicated to figure out, for
+	 * now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
+	 * KASLR uses.
+	 *
+	 * Also relocate it if image_offset is zero, i.e. the kernel wasn't
+	 * loaded by LoadImage, but rather by a bootloader that called the
+	 * handover entry. The reason we must always relocate in this case is
+	 * to handle the case of systemd-boot booting a unified kernel image,
+	 * which is a PE executable that contains the bzImage and an initrd as
+	 * COFF sections. The initrd section is placed after the bzImage
+	 * without ensuring that there are at least init_size bytes available
+	 * for the bzImage, and thus the compressed kernel's startup code may
+	 * overwrite the initrd unless it is moved out of the way.
+	 */
+
+	buffer_start = ALIGN(bzimage_addr - image_offset,
+			     hdr->kernel_alignment);
+	buffer_end = buffer_start + hdr->init_size;
+
+	if ((buffer_start < LOAD_PHYSICAL_ADDR)				     ||
+	    (IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE)    ||
+	    (IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
+	    (image_offset == 0)) {
+		status = efi_relocate_kernel(&bzimage_addr,
+					     hdr->init_size, hdr->init_size,
+					     hdr->pref_address,
+					     hdr->kernel_alignment,
+					     LOAD_PHYSICAL_ADDR);
+		if (status != EFI_SUCCESS) {
+			efi_err("efi_relocate_kernel() failed!\n");
+			goto fail;
+		}
+		/*
+		 * Now that we've copied the kernel elsewhere, we no longer
+		 * have a set up block before startup_32(), so reset image_offset
+		 * to zero in case it was set earlier.
+		 */
+		image_offset = 0;
+	}
+
+#ifdef CONFIG_CMDLINE_BOOL
+	status = efi_parse_options(CONFIG_CMDLINE);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		goto fail;
+	}
+#endif
+	if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
+		unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+					       ((u64)boot_params->ext_cmd_line_ptr << 32));
+		status = efi_parse_options((char *)cmdline_paddr);
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to parse options\n");
+			goto fail;
+		}
+	}
+
+	/*
+	 * At this point, an initrd may already have been loaded by the
+	 * bootloader and passed via bootparams. We permit an initrd loaded
+	 * from the LINUX_EFI_INITRD_MEDIA_GUID device path to supersede it.
+	 *
+	 * If the device path is not present, any command-line initrd=
+	 * arguments will be processed only if image is not NULL, which will be
+	 * the case only if we were loaded via the PE entry point.
+	 */
+	if (!efi_noinitrd) {
+		unsigned long addr, size;
+
+		status = efi_load_initrd(image, &addr, &size,
+					 hdr->initrd_addr_max, ULONG_MAX);
+
+		if (status != EFI_SUCCESS) {
+			efi_err("Failed to load initrd!\n");
+			goto fail;
+		}
+		if (size > 0) {
+			efi_set_u64_split(addr, &hdr->ramdisk_image,
+					  &boot_params->ext_ramdisk_image);
+			efi_set_u64_split(size, &hdr->ramdisk_size,
+					  &boot_params->ext_ramdisk_size);
+		}
+	}
+
+	/*
+	 * If the boot loader gave us a value for secure_boot then we use that,
+	 * otherwise we ask the BIOS.
+	 */
+	if (boot_params->secure_boot == efi_secureboot_mode_unset)
+		boot_params->secure_boot = efi_get_secureboot();
+
+	/* Ask the firmware to clear memory on unclean shutdown */
+	efi_enable_reset_attack_mitigation();
+
+	efi_random_get_seed();
+
+	efi_retrieve_tpm2_eventlog();
+
+	setup_graphics(boot_params);
+
+	setup_efi_pci(boot_params);
+
+	setup_quirks(boot_params);
+
+	status = exit_boot(boot_params, handle);
+	if (status != EFI_SUCCESS) {
+		efi_err("exit_boot() failed!\n");
+		goto fail;
+	}
+
+	return bzimage_addr;
+fail:
+	efi_err("efi_main() failed!\n");
+
+	efi_exit(handle, status);
+}
diff --git a/drivers/firmware/efi/memattr.c b/drivers/firmware/efi/memattr.c
new file mode 100644
index 000000000..f178b2984
--- /dev/null
+++ b/drivers/firmware/efi/memattr.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#define pr_fmt(fmt)	"efi: memattr: " fmt
+
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+
+#include <asm/early_ioremap.h>
+
+static int __initdata tbl_size;
+unsigned long __ro_after_init efi_mem_attr_table = EFI_INVALID_TABLE_ADDR;
+
+/*
+ * Reserve the memory associated with the Memory Attributes configuration
+ * table, if it exists.
+ */
+int __init efi_memattr_init(void)
+{
+	efi_memory_attributes_table_t *tbl;
+
+	if (efi_mem_attr_table == EFI_INVALID_TABLE_ADDR)
+		return 0;
+
+	tbl = early_memremap(efi_mem_attr_table, sizeof(*tbl));
+	if (!tbl) {
+		pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n",
+		       efi_mem_attr_table);
+		return -ENOMEM;
+	}
+
+	if (tbl->version > 2) {
+		pr_warn("Unexpected EFI Memory Attributes table version %d\n",
+			tbl->version);
+		goto unmap;
+	}
+
+	tbl_size = sizeof(*tbl) + tbl->num_entries * tbl->desc_size;
+	memblock_reserve(efi_mem_attr_table, tbl_size);
+	set_bit(EFI_MEM_ATTR, &efi.flags);
+
+unmap:
+	early_memunmap(tbl, sizeof(*tbl));
+	return 0;
+}
+
+/*
+ * Returns a copy @out of the UEFI memory descriptor @in if it is covered
+ * entirely by a UEFI memory map entry with matching attributes. The virtual
+ * address of @out is set according to the matching entry that was found.
+ */
+static bool entry_is_valid(const efi_memory_desc_t *in, efi_memory_desc_t *out)
+{
+	u64 in_paddr = in->phys_addr;
+	u64 in_size = in->num_pages << EFI_PAGE_SHIFT;
+	efi_memory_desc_t *md;
+
+	*out = *in;
+
+	if (in->type != EFI_RUNTIME_SERVICES_CODE &&
+	    in->type != EFI_RUNTIME_SERVICES_DATA) {
+		pr_warn("Entry type should be RuntimeServiceCode/Data\n");
+		return false;
+	}
+
+	if (PAGE_SIZE > EFI_PAGE_SIZE &&
+	    (!PAGE_ALIGNED(in->phys_addr) ||
+	     !PAGE_ALIGNED(in->num_pages << EFI_PAGE_SHIFT))) {
+		/*
+		 * Since arm64 may execute with page sizes of up to 64 KB, the
+		 * UEFI spec mandates that RuntimeServices memory regions must
+		 * be 64 KB aligned. We need to validate this here since we will
+		 * not be able to tighten permissions on such regions without
+		 * affecting adjacent regions.
+		 */
+		pr_warn("Entry address region misaligned\n");
+		return false;
+	}
+
+	for_each_efi_memory_desc(md) {
+		u64 md_paddr = md->phys_addr;
+		u64 md_size = md->num_pages << EFI_PAGE_SHIFT;
+
+		if (!(md->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+		if (md->virt_addr == 0 && md->phys_addr != 0) {
+			/* no virtual mapping has been installed by the stub */
+			break;
+		}
+
+		if (md_paddr > in_paddr || (in_paddr - md_paddr) >= md_size)
+			continue;
+
+		/*
+		 * This entry covers the start of @in, check whether
+		 * it covers the end as well.
+		 */
+		if (md_paddr + md_size < in_paddr + in_size) {
+			pr_warn("Entry covers multiple EFI memory map regions\n");
+			return false;
+		}
+
+		if (md->type != in->type) {
+			pr_warn("Entry type deviates from EFI memory map region type\n");
+			return false;
+		}
+
+		out->virt_addr = in_paddr + (md->virt_addr - md_paddr);
+
+		return true;
+	}
+
+	pr_warn("No matching entry found in the EFI memory map\n");
+	return false;
+}
+
+/*
+ * To be called after the EFI page tables have been populated. If a memory
+ * attributes table is available, its contents will be used to update the
+ * mappings with tightened permissions as described by the table.
+ * This requires the UEFI memory map to have already been populated with
+ * virtual addresses.
+ */
+int __init efi_memattr_apply_permissions(struct mm_struct *mm,
+					 efi_memattr_perm_setter fn)
+{
+	efi_memory_attributes_table_t *tbl;
+	int i, ret;
+
+	if (tbl_size <= sizeof(*tbl))
+		return 0;
+
+	/*
+	 * We need the EFI memory map to be setup so we can use it to
+	 * lookup the virtual addresses of all entries in the  of EFI
+	 * Memory Attributes table. If it isn't available, this
+	 * function should not be called.
+	 */
+	if (WARN_ON(!efi_enabled(EFI_MEMMAP)))
+		return 0;
+
+	tbl = memremap(efi_mem_attr_table, tbl_size, MEMREMAP_WB);
+	if (!tbl) {
+		pr_err("Failed to map EFI Memory Attributes table @ 0x%lx\n",
+		       efi_mem_attr_table);
+		return -ENOMEM;
+	}
+
+	if (efi_enabled(EFI_DBG))
+		pr_info("Processing EFI Memory Attributes table:\n");
+
+	for (i = ret = 0; ret == 0 && i < tbl->num_entries; i++) {
+		efi_memory_desc_t md;
+		unsigned long size;
+		bool valid;
+		char buf[64];
+
+		valid = entry_is_valid((void *)tbl->entry + i * tbl->desc_size,
+				       &md);
+		size = md.num_pages << EFI_PAGE_SHIFT;
+		if (efi_enabled(EFI_DBG) || !valid)
+			pr_info("%s 0x%012llx-0x%012llx %s\n",
+				valid ? "" : "!", md.phys_addr,
+				md.phys_addr + size - 1,
+				efi_md_typeattr_format(buf, sizeof(buf), &md));
+
+		if (valid) {
+			ret = fn(mm, &md);
+			if (ret)
+				pr_err("Error updating mappings, skipping subsequent md's\n");
+		}
+	}
+	memunmap(tbl);
+	return ret;
+}
diff --git a/drivers/firmware/efi/memmap.c b/drivers/firmware/efi/memmap.c
new file mode 100644
index 000000000..2ff1883dc
--- /dev/null
+++ b/drivers/firmware/efi/memmap.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common EFI memory map functions.
+ */
+
+#define pr_fmt(fmt) "efi: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/efi.h>
+#include <linux/io.h>
+#include <asm/early_ioremap.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+
+static phys_addr_t __init __efi_memmap_alloc_early(unsigned long size)
+{
+	return memblock_phys_alloc(size, SMP_CACHE_BYTES);
+}
+
+static phys_addr_t __init __efi_memmap_alloc_late(unsigned long size)
+{
+	unsigned int order = get_order(size);
+	struct page *p = alloc_pages(GFP_KERNEL, order);
+
+	if (!p)
+		return 0;
+
+	return PFN_PHYS(page_to_pfn(p));
+}
+
+void __init __efi_memmap_free(u64 phys, unsigned long size, unsigned long flags)
+{
+	if (flags & EFI_MEMMAP_MEMBLOCK) {
+		if (slab_is_available())
+			memblock_free_late(phys, size);
+		else
+			memblock_free(phys, size);
+	} else if (flags & EFI_MEMMAP_SLAB) {
+		struct page *p = pfn_to_page(PHYS_PFN(phys));
+		unsigned int order = get_order(size);
+
+		free_pages((unsigned long) page_address(p), order);
+	}
+}
+
+static void __init efi_memmap_free(void)
+{
+	__efi_memmap_free(efi.memmap.phys_map,
+			efi.memmap.desc_size * efi.memmap.nr_map,
+			efi.memmap.flags);
+}
+
+/**
+ * efi_memmap_alloc - Allocate memory for the EFI memory map
+ * @num_entries: Number of entries in the allocated map.
+ * @data: efi memmap installation parameters
+ *
+ * Depending on whether mm_init() has already been invoked or not,
+ * either memblock or "normal" page allocation is used.
+ *
+ * Returns the physical address of the allocated memory map on
+ * success, zero on failure.
+ */
+int __init efi_memmap_alloc(unsigned int num_entries,
+		struct efi_memory_map_data *data)
+{
+	/* Expect allocation parameters are zero initialized */
+	WARN_ON(data->phys_map || data->size);
+
+	data->size = num_entries * efi.memmap.desc_size;
+	data->desc_version = efi.memmap.desc_version;
+	data->desc_size = efi.memmap.desc_size;
+	data->flags &= ~(EFI_MEMMAP_SLAB | EFI_MEMMAP_MEMBLOCK);
+	data->flags |= efi.memmap.flags & EFI_MEMMAP_LATE;
+
+	if (slab_is_available()) {
+		data->flags |= EFI_MEMMAP_SLAB;
+		data->phys_map = __efi_memmap_alloc_late(data->size);
+	} else {
+		data->flags |= EFI_MEMMAP_MEMBLOCK;
+		data->phys_map = __efi_memmap_alloc_early(data->size);
+	}
+
+	if (!data->phys_map)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * __efi_memmap_init - Common code for mapping the EFI memory map
+ * @data: EFI memory map data
+ *
+ * This function takes care of figuring out which function to use to
+ * map the EFI memory map in efi.memmap based on how far into the boot
+ * we are.
+ *
+ * During bootup EFI_MEMMAP_LATE in data->flags should be clear since we
+ * only have access to the early_memremap*() functions as the vmalloc
+ * space isn't setup.  Once the kernel is fully booted we can fallback
+ * to the more robust memremap*() API.
+ *
+ * Returns zero on success, a negative error code on failure.
+ */
+static int __init __efi_memmap_init(struct efi_memory_map_data *data)
+{
+	struct efi_memory_map map;
+	phys_addr_t phys_map;
+
+	if (efi_enabled(EFI_PARAVIRT))
+		return 0;
+
+	phys_map = data->phys_map;
+
+	if (data->flags & EFI_MEMMAP_LATE)
+		map.map = memremap(phys_map, data->size, MEMREMAP_WB);
+	else
+		map.map = early_memremap(phys_map, data->size);
+
+	if (!map.map) {
+		pr_err("Could not map the memory map!\n");
+		return -ENOMEM;
+	}
+
+	/* NOP if data->flags & (EFI_MEMMAP_MEMBLOCK | EFI_MEMMAP_SLAB) == 0 */
+	efi_memmap_free();
+
+	map.phys_map = data->phys_map;
+	map.nr_map = data->size / data->desc_size;
+	map.map_end = map.map + data->size;
+
+	map.desc_version = data->desc_version;
+	map.desc_size = data->desc_size;
+	map.flags = data->flags;
+
+	set_bit(EFI_MEMMAP, &efi.flags);
+
+	efi.memmap = map;
+
+	return 0;
+}
+
+/**
+ * efi_memmap_init_early - Map the EFI memory map data structure
+ * @data: EFI memory map data
+ *
+ * Use early_memremap() to map the passed in EFI memory map and assign
+ * it to efi.memmap.
+ */
+int __init efi_memmap_init_early(struct efi_memory_map_data *data)
+{
+	/* Cannot go backwards */
+	WARN_ON(efi.memmap.flags & EFI_MEMMAP_LATE);
+
+	data->flags = 0;
+	return __efi_memmap_init(data);
+}
+
+void __init efi_memmap_unmap(void)
+{
+	if (!efi_enabled(EFI_MEMMAP))
+		return;
+
+	if (!(efi.memmap.flags & EFI_MEMMAP_LATE)) {
+		unsigned long size;
+
+		size = efi.memmap.desc_size * efi.memmap.nr_map;
+		early_memunmap(efi.memmap.map, size);
+	} else {
+		memunmap(efi.memmap.map);
+	}
+
+	efi.memmap.map = NULL;
+	clear_bit(EFI_MEMMAP, &efi.flags);
+}
+
+/**
+ * efi_memmap_init_late - Map efi.memmap with memremap()
+ * @phys_addr: Physical address of the new EFI memory map
+ * @size: Size in bytes of the new EFI memory map
+ *
+ * Setup a mapping of the EFI memory map using ioremap_cache(). This
+ * function should only be called once the vmalloc space has been
+ * setup and is therefore not suitable for calling during early EFI
+ * initialise, e.g. in efi_init(). Additionally, it expects
+ * efi_memmap_init_early() to have already been called.
+ *
+ * The reason there are two EFI memmap initialisation
+ * (efi_memmap_init_early() and this late version) is because the
+ * early EFI memmap should be explicitly unmapped once EFI
+ * initialisation is complete as the fixmap space used to map the EFI
+ * memmap (via early_memremap()) is a scarce resource.
+ *
+ * This late mapping is intended to persist for the duration of
+ * runtime so that things like efi_mem_desc_lookup() and
+ * efi_mem_attributes() always work.
+ *
+ * Returns zero on success, a negative error code on failure.
+ */
+int __init efi_memmap_init_late(phys_addr_t addr, unsigned long size)
+{
+	struct efi_memory_map_data data = {
+		.phys_map = addr,
+		.size = size,
+		.flags = EFI_MEMMAP_LATE,
+	};
+
+	/* Did we forget to unmap the early EFI memmap? */
+	WARN_ON(efi.memmap.map);
+
+	/* Were we already called? */
+	WARN_ON(efi.memmap.flags & EFI_MEMMAP_LATE);
+
+	/*
+	 * It makes no sense to allow callers to register different
+	 * values for the following fields. Copy them out of the
+	 * existing early EFI memmap.
+	 */
+	data.desc_version = efi.memmap.desc_version;
+	data.desc_size = efi.memmap.desc_size;
+
+	return __efi_memmap_init(&data);
+}
+
+/**
+ * efi_memmap_install - Install a new EFI memory map in efi.memmap
+ * @ctx: map allocation parameters (address, size, flags)
+ *
+ * Unlike efi_memmap_init_*(), this function does not allow the caller
+ * to switch from early to late mappings. It simply uses the existing
+ * mapping function and installs the new memmap.
+ *
+ * Returns zero on success, a negative error code on failure.
+ */
+int __init efi_memmap_install(struct efi_memory_map_data *data)
+{
+	efi_memmap_unmap();
+
+	return __efi_memmap_init(data);
+}
+
+/**
+ * efi_memmap_split_count - Count number of additional EFI memmap entries
+ * @md: EFI memory descriptor to split
+ * @range: Address range (start, end) to split around
+ *
+ * Returns the number of additional EFI memmap entries required to
+ * accomodate @range.
+ */
+int __init efi_memmap_split_count(efi_memory_desc_t *md, struct range *range)
+{
+	u64 m_start, m_end;
+	u64 start, end;
+	int count = 0;
+
+	start = md->phys_addr;
+	end = start + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+
+	/* modifying range */
+	m_start = range->start;
+	m_end = range->end;
+
+	if (m_start <= start) {
+		/* split into 2 parts */
+		if (start < m_end && m_end < end)
+			count++;
+	}
+
+	if (start < m_start && m_start < end) {
+		/* split into 3 parts */
+		if (m_end < end)
+			count += 2;
+		/* split into 2 parts */
+		if (end <= m_end)
+			count++;
+	}
+
+	return count;
+}
+
+/**
+ * efi_memmap_insert - Insert a memory region in an EFI memmap
+ * @old_memmap: The existing EFI memory map structure
+ * @buf: Address of buffer to store new map
+ * @mem: Memory map entry to insert
+ *
+ * It is suggested that you call efi_memmap_split_count() first
+ * to see how large @buf needs to be.
+ */
+void __init efi_memmap_insert(struct efi_memory_map *old_memmap, void *buf,
+			      struct efi_mem_range *mem)
+{
+	u64 m_start, m_end, m_attr;
+	efi_memory_desc_t *md;
+	u64 start, end;
+	void *old, *new;
+
+	/* modifying range */
+	m_start = mem->range.start;
+	m_end = mem->range.end;
+	m_attr = mem->attribute;
+
+	/*
+	 * The EFI memory map deals with regions in EFI_PAGE_SIZE
+	 * units. Ensure that the region described by 'mem' is aligned
+	 * correctly.
+	 */
+	if (!IS_ALIGNED(m_start, EFI_PAGE_SIZE) ||
+	    !IS_ALIGNED(m_end + 1, EFI_PAGE_SIZE)) {
+		WARN_ON(1);
+		return;
+	}
+
+	for (old = old_memmap->map, new = buf;
+	     old < old_memmap->map_end;
+	     old += old_memmap->desc_size, new += old_memmap->desc_size) {
+
+		/* copy original EFI memory descriptor */
+		memcpy(new, old, old_memmap->desc_size);
+		md = new;
+		start = md->phys_addr;
+		end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+
+		if (m_start <= start && end <= m_end)
+			md->attribute |= m_attr;
+
+		if (m_start <= start &&
+		    (start < m_end && m_end < end)) {
+			/* first part */
+			md->attribute |= m_attr;
+			md->num_pages = (m_end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+			/* latter part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_end + 1;
+			md->num_pages = (end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+		}
+
+		if ((start < m_start && m_start < end) && m_end < end) {
+			/* first part */
+			md->num_pages = (m_start - md->phys_addr) >>
+				EFI_PAGE_SHIFT;
+			/* middle part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->attribute |= m_attr;
+			md->phys_addr = m_start;
+			md->num_pages = (m_end - m_start + 1) >>
+				EFI_PAGE_SHIFT;
+			/* last part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_end + 1;
+			md->num_pages = (end - m_end) >>
+				EFI_PAGE_SHIFT;
+		}
+
+		if ((start < m_start && m_start < end) &&
+		    (end <= m_end)) {
+			/* first part */
+			md->num_pages = (m_start - md->phys_addr) >>
+				EFI_PAGE_SHIFT;
+			/* latter part */
+			new += old_memmap->desc_size;
+			memcpy(new, old, old_memmap->desc_size);
+			md = new;
+			md->phys_addr = m_start;
+			md->num_pages = (end - md->phys_addr + 1) >>
+				EFI_PAGE_SHIFT;
+			md->attribute |= m_attr;
+		}
+	}
+}
diff --git a/drivers/firmware/efi/mokvar-table.c b/drivers/firmware/efi/mokvar-table.c
new file mode 100644
index 000000000..38722d200
--- /dev/null
+++ b/drivers/firmware/efi/mokvar-table.c
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mokvar-table.c
+ *
+ * Copyright (c) 2020 Red Hat
+ * Author: Lenny Szubowicz <lszubowi@redhat.com>
+ *
+ * This module contains the kernel support for the Linux EFI Machine
+ * Owner Key (MOK) variable configuration table, which is identified by
+ * the LINUX_EFI_MOK_VARIABLE_TABLE_GUID.
+ *
+ * This EFI configuration table provides a more robust alternative to
+ * EFI volatile variables by which an EFI boot loader can pass the
+ * contents of the Machine Owner Key (MOK) certificate stores to the
+ * kernel during boot. If both the EFI MOK config table and corresponding
+ * EFI MOK variables are present, the table should be considered as
+ * more authoritative.
+ *
+ * This module includes code that validates and maps the EFI MOK table,
+ * if it's presence was detected very early in boot.
+ *
+ * Kernel interface routines are provided to walk through all the
+ * entries in the MOK config table or to search for a specific named
+ * entry.
+ *
+ * The contents of the individual named MOK config table entries are
+ * made available to user space via read-only sysfs binary files under:
+ *
+ * /sys/firmware/efi/mok-variables/
+ *
+ */
+#define pr_fmt(fmt) "mokvar: " fmt
+
+#include <linux/capability.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include <asm/early_ioremap.h>
+
+/*
+ * The LINUX_EFI_MOK_VARIABLE_TABLE_GUID config table is a packed
+ * sequence of struct efi_mokvar_table_entry, one for each named
+ * MOK variable. The sequence is terminated by an entry with a
+ * completely NULL name and 0 data size.
+ *
+ * efi_mokvar_table_size is set to the computed size of the
+ * MOK config table by efi_mokvar_table_init(). This will be
+ * non-zero if and only if the table if present and has been
+ * validated by efi_mokvar_table_init().
+ */
+static size_t efi_mokvar_table_size;
+
+/*
+ * efi_mokvar_table_va is the kernel virtual address at which the
+ * EFI MOK config table has been mapped by efi_mokvar_sysfs_init().
+ */
+static struct efi_mokvar_table_entry *efi_mokvar_table_va;
+
+/*
+ * Each /sys/firmware/efi/mok-variables/ sysfs file is represented by
+ * an instance of struct efi_mokvar_sysfs_attr on efi_mokvar_sysfs_list.
+ * bin_attr.private points to the associated EFI MOK config table entry.
+ *
+ * This list is created during boot and then remains unchanged.
+ * So no synchronization is currently required to walk the list.
+ */
+struct efi_mokvar_sysfs_attr {
+	struct bin_attribute bin_attr;
+	struct list_head node;
+};
+
+static LIST_HEAD(efi_mokvar_sysfs_list);
+static struct kobject *mokvar_kobj;
+
+/*
+ * efi_mokvar_table_init() - Early boot validation of EFI MOK config table
+ *
+ * If present, validate and compute the size of the EFI MOK variable
+ * configuration table. This table may be provided by an EFI boot loader
+ * as an alternative to ordinary EFI variables, due to platform-dependent
+ * limitations. The memory occupied by this table is marked as reserved.
+ *
+ * This routine must be called before efi_free_boot_services() in order
+ * to guarantee that it can mark the table as reserved.
+ *
+ * Implicit inputs:
+ * efi.mokvar_table:	Physical address of EFI MOK variable config table
+ *			or special value that indicates no such table.
+ *
+ * Implicit outputs:
+ * efi_mokvar_table_size: Computed size of EFI MOK variable config table.
+ *			The table is considered present and valid if this
+ *			is non-zero.
+ */
+void __init efi_mokvar_table_init(void)
+{
+	efi_memory_desc_t md;
+	void *va = NULL;
+	unsigned long cur_offset = 0;
+	unsigned long offset_limit;
+	unsigned long map_size = 0;
+	unsigned long map_size_needed = 0;
+	unsigned long size;
+	struct efi_mokvar_table_entry *mokvar_entry;
+	int err;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return;
+
+	if (efi.mokvar_table == EFI_INVALID_TABLE_ADDR)
+		return;
+	/*
+	 * The EFI MOK config table must fit within a single EFI memory
+	 * descriptor range.
+	 */
+	err = efi_mem_desc_lookup(efi.mokvar_table, &md);
+	if (err) {
+		pr_warn("EFI MOKvar config table is not within the EFI memory map\n");
+		return;
+	}
+
+	offset_limit = efi_mem_desc_end(&md) - efi.mokvar_table;
+
+	/*
+	 * Validate the MOK config table. Since there is no table header
+	 * from which we could get the total size of the MOK config table,
+	 * we compute the total size as we validate each variably sized
+	 * entry, remapping as necessary.
+	 */
+	err = -EINVAL;
+	while (cur_offset + sizeof(*mokvar_entry) <= offset_limit) {
+		mokvar_entry = va + cur_offset;
+		map_size_needed = cur_offset + sizeof(*mokvar_entry);
+		if (map_size_needed > map_size) {
+			if (va)
+				early_memunmap(va, map_size);
+			/*
+			 * Map a little more than the fixed size entry
+			 * header, anticipating some data. It's safe to
+			 * do so as long as we stay within current memory
+			 * descriptor.
+			 */
+			map_size = min(map_size_needed + 2*EFI_PAGE_SIZE,
+				       offset_limit);
+			va = early_memremap(efi.mokvar_table, map_size);
+			if (!va) {
+				pr_err("Failed to map EFI MOKvar config table pa=0x%lx, size=%lu.\n",
+				       efi.mokvar_table, map_size);
+				return;
+			}
+			mokvar_entry = va + cur_offset;
+		}
+
+		/* Check for last sentinel entry */
+		if (mokvar_entry->name[0] == '\0') {
+			if (mokvar_entry->data_size != 0)
+				break;
+			err = 0;
+			break;
+		}
+
+		/* Sanity check that the name is null terminated */
+		size = strnlen(mokvar_entry->name,
+			       sizeof(mokvar_entry->name));
+		if (size >= sizeof(mokvar_entry->name))
+			break;
+
+		/* Advance to the next entry */
+		cur_offset = map_size_needed + mokvar_entry->data_size;
+	}
+
+	if (va)
+		early_memunmap(va, map_size);
+	if (err) {
+		pr_err("EFI MOKvar config table is not valid\n");
+		return;
+	}
+
+	if (md.type == EFI_BOOT_SERVICES_DATA)
+		efi_mem_reserve(efi.mokvar_table, map_size_needed);
+
+	efi_mokvar_table_size = map_size_needed;
+}
+
+/*
+ * efi_mokvar_entry_next() - Get next entry in the EFI MOK config table
+ *
+ * mokvar_entry:	Pointer to current EFI MOK config table entry
+ *			or null. Null indicates get first entry.
+ *			Passed by reference. This is updated to the
+ *			same value as the return value.
+ *
+ * Returns:		Pointer to next EFI MOK config table entry
+ *			or null, if there are no more entries.
+ *			Same value is returned in the mokvar_entry
+ *			parameter.
+ *
+ * This routine depends on the EFI MOK config table being entirely
+ * mapped with it's starting virtual address in efi_mokvar_table_va.
+ */
+struct efi_mokvar_table_entry *efi_mokvar_entry_next(
+			struct efi_mokvar_table_entry **mokvar_entry)
+{
+	struct efi_mokvar_table_entry *mokvar_cur;
+	struct efi_mokvar_table_entry *mokvar_next;
+	size_t size_cur;
+
+	mokvar_cur = *mokvar_entry;
+	*mokvar_entry = NULL;
+
+	if (efi_mokvar_table_va == NULL)
+		return NULL;
+
+	if (mokvar_cur == NULL) {
+		mokvar_next = efi_mokvar_table_va;
+	} else {
+		if (mokvar_cur->name[0] == '\0')
+			return NULL;
+		size_cur = sizeof(*mokvar_cur) + mokvar_cur->data_size;
+		mokvar_next = (void *)mokvar_cur + size_cur;
+	}
+
+	if (mokvar_next->name[0] == '\0')
+		return NULL;
+
+	*mokvar_entry = mokvar_next;
+	return mokvar_next;
+}
+
+/*
+ * efi_mokvar_entry_find() - Find EFI MOK config entry by name
+ *
+ * name:	Name of the entry to look for.
+ *
+ * Returns:	Pointer to EFI MOK config table entry if found;
+ *		null otherwise.
+ *
+ * This routine depends on the EFI MOK config table being entirely
+ * mapped with it's starting virtual address in efi_mokvar_table_va.
+ */
+struct efi_mokvar_table_entry *efi_mokvar_entry_find(const char *name)
+{
+	struct efi_mokvar_table_entry *mokvar_entry = NULL;
+
+	while (efi_mokvar_entry_next(&mokvar_entry)) {
+		if (!strncmp(name, mokvar_entry->name,
+			     sizeof(mokvar_entry->name)))
+			return mokvar_entry;
+	}
+	return NULL;
+}
+
+/*
+ * efi_mokvar_sysfs_read() - sysfs binary file read routine
+ *
+ * Returns:	Count of bytes read.
+ *
+ * Copy EFI MOK config table entry data for this mokvar sysfs binary file
+ * to the supplied buffer, starting at the specified offset into mokvar table
+ * entry data, for the specified count bytes. The copy is limited by the
+ * amount of data in this mokvar config table entry.
+ */
+static ssize_t efi_mokvar_sysfs_read(struct file *file, struct kobject *kobj,
+				 struct bin_attribute *bin_attr, char *buf,
+				 loff_t off, size_t count)
+{
+	struct efi_mokvar_table_entry *mokvar_entry = bin_attr->private;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return 0;
+
+	if (off >= mokvar_entry->data_size)
+		return 0;
+	if (count >  mokvar_entry->data_size - off)
+		count = mokvar_entry->data_size - off;
+
+	memcpy(buf, mokvar_entry->data + off, count);
+	return count;
+}
+
+/*
+ * efi_mokvar_sysfs_init() - Map EFI MOK config table and create sysfs
+ *
+ * Map the EFI MOK variable config table for run-time use by the kernel
+ * and create the sysfs entries in /sys/firmware/efi/mok-variables/
+ *
+ * This routine just returns if a valid EFI MOK variable config table
+ * was not found earlier during boot.
+ *
+ * This routine must be called during a "middle" initcall phase, i.e.
+ * after efi_mokvar_table_init() but before UEFI certs are loaded
+ * during late init.
+ *
+ * Implicit inputs:
+ * efi.mokvar_table:	Physical address of EFI MOK variable config table
+ *			or special value that indicates no such table.
+ *
+ * efi_mokvar_table_size: Computed size of EFI MOK variable config table.
+ *			The table is considered present and valid if this
+ *			is non-zero.
+ *
+ * Implicit outputs:
+ * efi_mokvar_table_va:	Start virtual address of the EFI MOK config table.
+ */
+static int __init efi_mokvar_sysfs_init(void)
+{
+	void *config_va;
+	struct efi_mokvar_table_entry *mokvar_entry = NULL;
+	struct efi_mokvar_sysfs_attr *mokvar_sysfs = NULL;
+	int err = 0;
+
+	if (efi_mokvar_table_size == 0)
+		return -ENOENT;
+
+	config_va = memremap(efi.mokvar_table, efi_mokvar_table_size,
+			     MEMREMAP_WB);
+	if (!config_va) {
+		pr_err("Failed to map EFI MOKvar config table\n");
+		return -ENOMEM;
+	}
+	efi_mokvar_table_va = config_va;
+
+	mokvar_kobj = kobject_create_and_add("mok-variables", efi_kobj);
+	if (!mokvar_kobj) {
+		pr_err("Failed to create EFI mok-variables sysfs entry\n");
+		return -ENOMEM;
+	}
+
+	while (efi_mokvar_entry_next(&mokvar_entry)) {
+		mokvar_sysfs = kzalloc(sizeof(*mokvar_sysfs), GFP_KERNEL);
+		if (!mokvar_sysfs) {
+			err = -ENOMEM;
+			break;
+		}
+
+		sysfs_bin_attr_init(&mokvar_sysfs->bin_attr);
+		mokvar_sysfs->bin_attr.private = mokvar_entry;
+		mokvar_sysfs->bin_attr.attr.name = mokvar_entry->name;
+		mokvar_sysfs->bin_attr.attr.mode = 0400;
+		mokvar_sysfs->bin_attr.size = mokvar_entry->data_size;
+		mokvar_sysfs->bin_attr.read = efi_mokvar_sysfs_read;
+
+		err = sysfs_create_bin_file(mokvar_kobj,
+					   &mokvar_sysfs->bin_attr);
+		if (err)
+			break;
+
+		list_add_tail(&mokvar_sysfs->node, &efi_mokvar_sysfs_list);
+	}
+
+	if (err) {
+		pr_err("Failed to create some EFI mok-variables sysfs entries\n");
+		kfree(mokvar_sysfs);
+	}
+	return err;
+}
+device_initcall(efi_mokvar_sysfs_init);
diff --git a/drivers/firmware/efi/rci2-table.c b/drivers/firmware/efi/rci2-table.c
new file mode 100644
index 000000000..de1a9a1f9
--- /dev/null
+++ b/drivers/firmware/efi/rci2-table.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Export Runtime Configuration Interface Table Version 2 (RCI2)
+ * to sysfs
+ *
+ * Copyright (C) 2019 Dell Inc
+ * by Narendra K <Narendra.K@dell.com>
+ *
+ * System firmware advertises the address of the RCI2 Table via
+ * an EFI Configuration Table entry. This code retrieves the RCI2
+ * table from the address and exports it to sysfs as a binary
+ * attribute 'rci2' under /sys/firmware/efi/tables directory.
+ */
+
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/efi.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+#define RCI_SIGNATURE	"_RC_"
+
+struct rci2_table_global_hdr {
+	u16 type;
+	u16 resvd0;
+	u16 hdr_len;
+	u8 rci2_sig[4];
+	u16 resvd1;
+	u32 resvd2;
+	u32 resvd3;
+	u8 major_rev;
+	u8 minor_rev;
+	u16 num_of_structs;
+	u32 rci2_len;
+	u16 rci2_chksum;
+} __packed;
+
+static u8 *rci2_base;
+static u32 rci2_table_len;
+unsigned long rci2_table_phys __ro_after_init = EFI_INVALID_TABLE_ADDR;
+
+static ssize_t raw_table_read(struct file *file, struct kobject *kobj,
+			      struct bin_attribute *attr, char *buf,
+			      loff_t pos, size_t count)
+{
+	memcpy(buf, attr->private + pos, count);
+	return count;
+}
+
+static BIN_ATTR(rci2, S_IRUSR, raw_table_read, NULL, 0);
+
+static u16 checksum(void)
+{
+	u8 len_is_odd = rci2_table_len % 2;
+	u32 chksum_len = rci2_table_len;
+	u16 *base = (u16 *)rci2_base;
+	u8 buf[2] = {0};
+	u32 offset = 0;
+	u16 chksum = 0;
+
+	if (len_is_odd)
+		chksum_len -= 1;
+
+	while (offset < chksum_len) {
+		chksum += *base;
+		offset += 2;
+		base++;
+	}
+
+	if (len_is_odd) {
+		buf[0] = *(u8 *)base;
+		chksum += *(u16 *)(buf);
+	}
+
+	return chksum;
+}
+
+static int __init efi_rci2_sysfs_init(void)
+{
+	struct kobject *tables_kobj;
+	int ret = -ENOMEM;
+
+	if (rci2_table_phys == EFI_INVALID_TABLE_ADDR)
+		return 0;
+
+	rci2_base = memremap(rci2_table_phys,
+			     sizeof(struct rci2_table_global_hdr),
+			     MEMREMAP_WB);
+	if (!rci2_base) {
+		pr_debug("RCI2 table init failed - could not map RCI2 table\n");
+		goto err;
+	}
+
+	if (strncmp(rci2_base +
+		    offsetof(struct rci2_table_global_hdr, rci2_sig),
+		    RCI_SIGNATURE, 4)) {
+		pr_debug("RCI2 table init failed - incorrect signature\n");
+		ret = -ENODEV;
+		goto err_unmap;
+	}
+
+	rci2_table_len = *(u32 *)(rci2_base +
+				  offsetof(struct rci2_table_global_hdr,
+				  rci2_len));
+
+	memunmap(rci2_base);
+
+	if (!rci2_table_len) {
+		pr_debug("RCI2 table init failed - incorrect table length\n");
+		goto err;
+	}
+
+	rci2_base = memremap(rci2_table_phys, rci2_table_len, MEMREMAP_WB);
+	if (!rci2_base) {
+		pr_debug("RCI2 table - could not map RCI2 table\n");
+		goto err;
+	}
+
+	if (checksum() != 0) {
+		pr_debug("RCI2 table - incorrect checksum\n");
+		ret = -ENODEV;
+		goto err_unmap;
+	}
+
+	tables_kobj = kobject_create_and_add("tables", efi_kobj);
+	if (!tables_kobj) {
+		pr_debug("RCI2 table - tables_kobj creation failed\n");
+		goto err_unmap;
+	}
+
+	bin_attr_rci2.size = rci2_table_len;
+	bin_attr_rci2.private = rci2_base;
+	ret = sysfs_create_bin_file(tables_kobj, &bin_attr_rci2);
+	if (ret != 0) {
+		pr_debug("RCI2 table - rci2 sysfs bin file creation failed\n");
+		kobject_del(tables_kobj);
+		kobject_put(tables_kobj);
+		goto err_unmap;
+	}
+
+	return 0;
+
+ err_unmap:
+	memunmap(rci2_base);
+ err:
+	pr_debug("RCI2 table - sysfs initialization failed\n");
+	return ret;
+}
+late_initcall(efi_rci2_sysfs_init);
diff --git a/drivers/firmware/efi/reboot.c b/drivers/firmware/efi/reboot.c
new file mode 100644
index 000000000..73089a24f
--- /dev/null
+++ b/drivers/firmware/efi/reboot.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014 Intel Corporation; author Matt Fleming
+ * Copyright (c) 2014 Red Hat, Inc., Mark Salter <msalter@redhat.com>
+ */
+#include <linux/efi.h>
+#include <linux/reboot.h>
+
+static void (*orig_pm_power_off)(void);
+
+int efi_reboot_quirk_mode = -1;
+
+void efi_reboot(enum reboot_mode reboot_mode, const char *__unused)
+{
+	const char *str[] = { "cold", "warm", "shutdown", "platform" };
+	int efi_mode, cap_reset_mode;
+
+	if (!efi_rt_services_supported(EFI_RT_SUPPORTED_RESET_SYSTEM))
+		return;
+
+	switch (reboot_mode) {
+	case REBOOT_WARM:
+	case REBOOT_SOFT:
+		efi_mode = EFI_RESET_WARM;
+		break;
+	default:
+		efi_mode = EFI_RESET_COLD;
+		break;
+	}
+
+	/*
+	 * If a quirk forced an EFI reset mode, always use that.
+	 */
+	if (efi_reboot_quirk_mode != -1)
+		efi_mode = efi_reboot_quirk_mode;
+
+	if (efi_capsule_pending(&cap_reset_mode)) {
+		if (efi_mode != cap_reset_mode)
+			printk(KERN_CRIT "efi: %s reset requested but pending "
+			       "capsule update requires %s reset... Performing "
+			       "%s reset.\n", str[efi_mode], str[cap_reset_mode],
+			       str[cap_reset_mode]);
+		efi_mode = cap_reset_mode;
+	}
+
+	efi.reset_system(efi_mode, EFI_SUCCESS, 0, NULL);
+}
+
+bool __weak efi_poweroff_required(void)
+{
+	return false;
+}
+
+static void efi_power_off(void)
+{
+	efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
+	/*
+	 * The above call should not return, if it does fall back to
+	 * the original power off method (typically ACPI poweroff).
+	 */
+	if (orig_pm_power_off)
+		orig_pm_power_off();
+}
+
+static int __init efi_shutdown_init(void)
+{
+	if (!efi_rt_services_supported(EFI_RT_SUPPORTED_RESET_SYSTEM))
+		return -ENODEV;
+
+	if (efi_poweroff_required()) {
+		orig_pm_power_off = pm_power_off;
+		pm_power_off = efi_power_off;
+	}
+
+	return 0;
+}
+late_initcall(efi_shutdown_init);
diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c
new file mode 100644
index 000000000..d28e715d2
--- /dev/null
+++ b/drivers/firmware/efi/riscv-runtime.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Extensible Firmware Interface
+ *
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ *
+ * Based on Extensible Firmware Interface Specification version 2.4
+ * Adapted from drivers/firmware/efi/arm-runtime.c
+ *
+ */
+
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/mm_types.h>
+#include <linux/preempt.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/pgtable.h>
+
+#include <asm/cacheflush.h>
+#include <asm/efi.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+
+static bool __init efi_virtmap_init(void)
+{
+	efi_memory_desc_t *md;
+
+	efi_mm.pgd = pgd_alloc(&efi_mm);
+	mm_init_cpumask(&efi_mm);
+	init_new_context(NULL, &efi_mm);
+
+	for_each_efi_memory_desc(md) {
+		phys_addr_t phys = md->phys_addr;
+		int ret;
+
+		if (!(md->attribute & EFI_MEMORY_RUNTIME))
+			continue;
+		if (md->virt_addr == 0)
+			return false;
+
+		ret = efi_create_mapping(&efi_mm, md);
+		if (ret) {
+			pr_warn("  EFI remap %pa: failed to create mapping (%d)\n",
+				&phys, ret);
+			return false;
+		}
+	}
+
+	if (efi_memattr_apply_permissions(&efi_mm, efi_set_mapping_permissions))
+		return false;
+
+	return true;
+}
+
+/*
+ * Enable the UEFI Runtime Services if all prerequisites are in place, i.e.,
+ * non-early mapping of the UEFI system table and virtual mappings for all
+ * EFI_MEMORY_RUNTIME regions.
+ */
+static int __init riscv_enable_runtime_services(void)
+{
+	u64 mapsize;
+
+	if (!efi_enabled(EFI_BOOT)) {
+		pr_info("EFI services will not be available.\n");
+		return 0;
+	}
+
+	efi_memmap_unmap();
+
+	mapsize = efi.memmap.desc_size * efi.memmap.nr_map;
+
+	if (efi_memmap_init_late(efi.memmap.phys_map, mapsize)) {
+		pr_err("Failed to remap EFI memory map\n");
+		return 0;
+	}
+
+	if (efi_soft_reserve_enabled()) {
+		efi_memory_desc_t *md;
+
+		for_each_efi_memory_desc(md) {
+			int md_size = md->num_pages << EFI_PAGE_SHIFT;
+			struct resource *res;
+
+			if (!(md->attribute & EFI_MEMORY_SP))
+				continue;
+
+			res = kzalloc(sizeof(*res), GFP_KERNEL);
+			if (WARN_ON(!res))
+				break;
+
+			res->start	= md->phys_addr;
+			res->end	= md->phys_addr + md_size - 1;
+			res->name	= "Soft Reserved";
+			res->flags	= IORESOURCE_MEM;
+			res->desc	= IORES_DESC_SOFT_RESERVED;
+
+			insert_resource(&iomem_resource, res);
+		}
+	}
+
+	if (efi_runtime_disabled()) {
+		pr_info("EFI runtime services will be disabled.\n");
+		return 0;
+	}
+
+	if (efi_enabled(EFI_RUNTIME_SERVICES)) {
+		pr_info("EFI runtime services access via paravirt.\n");
+		return 0;
+	}
+
+	pr_info("Remapping and enabling EFI services.\n");
+
+	if (!efi_virtmap_init()) {
+		pr_err("UEFI virtual mapping missing or invalid -- runtime services will not be available\n");
+		return -ENOMEM;
+	}
+
+	/* Set up runtime services function pointers */
+	efi_native_runtime_setup();
+	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+
+	return 0;
+}
+early_initcall(riscv_enable_runtime_services);
+
+void efi_virtmap_load(void)
+{
+	preempt_disable();
+	switch_mm(current->active_mm, &efi_mm, NULL);
+}
+
+void efi_virtmap_unload(void)
+{
+	switch_mm(&efi_mm, current->active_mm, NULL);
+	preempt_enable();
+}
diff --git a/drivers/firmware/efi/runtime-map.c b/drivers/firmware/efi/runtime-map.c
new file mode 100644
index 000000000..ad9ddefc9
--- /dev/null
+++ b/drivers/firmware/efi/runtime-map.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/drivers/efi/runtime-map.c
+ * Copyright (C) 2013 Red Hat, Inc., Dave Young <dyoung@redhat.com>
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/efi.h>
+#include <linux/slab.h>
+
+#include <asm/setup.h>
+
+struct efi_runtime_map_entry {
+	efi_memory_desc_t md;
+	struct kobject kobj;   /* kobject for each entry */
+};
+
+static struct efi_runtime_map_entry **map_entries;
+
+struct map_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct efi_runtime_map_entry *entry, char *buf);
+};
+
+static inline struct map_attribute *to_map_attr(struct attribute *attr)
+{
+	return container_of(attr, struct map_attribute, attr);
+}
+
+static ssize_t type_show(struct efi_runtime_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%x\n", entry->md.type);
+}
+
+#define EFI_RUNTIME_FIELD(var) entry->md.var
+
+#define EFI_RUNTIME_U64_ATTR_SHOW(name) \
+static ssize_t name##_show(struct efi_runtime_map_entry *entry, char *buf) \
+{ \
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n", EFI_RUNTIME_FIELD(name)); \
+}
+
+EFI_RUNTIME_U64_ATTR_SHOW(phys_addr);
+EFI_RUNTIME_U64_ATTR_SHOW(virt_addr);
+EFI_RUNTIME_U64_ATTR_SHOW(num_pages);
+EFI_RUNTIME_U64_ATTR_SHOW(attribute);
+
+static inline struct efi_runtime_map_entry *to_map_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct efi_runtime_map_entry, kobj);
+}
+
+static ssize_t map_attr_show(struct kobject *kobj, struct attribute *attr,
+			      char *buf)
+{
+	struct efi_runtime_map_entry *entry = to_map_entry(kobj);
+	struct map_attribute *map_attr = to_map_attr(attr);
+
+	return map_attr->show(entry, buf);
+}
+
+static struct map_attribute map_type_attr = __ATTR_RO_MODE(type, 0400);
+static struct map_attribute map_phys_addr_attr = __ATTR_RO_MODE(phys_addr, 0400);
+static struct map_attribute map_virt_addr_attr = __ATTR_RO_MODE(virt_addr, 0400);
+static struct map_attribute map_num_pages_attr = __ATTR_RO_MODE(num_pages, 0400);
+static struct map_attribute map_attribute_attr = __ATTR_RO_MODE(attribute, 0400);
+
+/*
+ * These are default attributes that are added for every memmap entry.
+ */
+static struct attribute *def_attrs[] = {
+	&map_type_attr.attr,
+	&map_phys_addr_attr.attr,
+	&map_virt_addr_attr.attr,
+	&map_num_pages_attr.attr,
+	&map_attribute_attr.attr,
+	NULL
+};
+
+static const struct sysfs_ops map_attr_ops = {
+	.show = map_attr_show,
+};
+
+static void map_release(struct kobject *kobj)
+{
+	struct efi_runtime_map_entry *entry;
+
+	entry = to_map_entry(kobj);
+	kfree(entry);
+}
+
+static struct kobj_type __refdata map_ktype = {
+	.sysfs_ops	= &map_attr_ops,
+	.default_attrs	= def_attrs,
+	.release	= map_release,
+};
+
+static struct kset *map_kset;
+
+static struct efi_runtime_map_entry *
+add_sysfs_runtime_map_entry(struct kobject *kobj, int nr,
+			    efi_memory_desc_t *md)
+{
+	int ret;
+	struct efi_runtime_map_entry *entry;
+
+	if (!map_kset) {
+		map_kset = kset_create_and_add("runtime-map", NULL, kobj);
+		if (!map_kset)
+			return ERR_PTR(-ENOMEM);
+	}
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
+		kset_unregister(map_kset);
+		map_kset = NULL;
+		return ERR_PTR(-ENOMEM);
+	}
+
+	memcpy(&entry->md, md, sizeof(efi_memory_desc_t));
+
+	kobject_init(&entry->kobj, &map_ktype);
+	entry->kobj.kset = map_kset;
+	ret = kobject_add(&entry->kobj, NULL, "%d", nr);
+	if (ret) {
+		kobject_put(&entry->kobj);
+		kset_unregister(map_kset);
+		map_kset = NULL;
+		return ERR_PTR(ret);
+	}
+
+	return entry;
+}
+
+int efi_get_runtime_map_size(void)
+{
+	return efi.memmap.nr_map * efi.memmap.desc_size;
+}
+
+int efi_get_runtime_map_desc_size(void)
+{
+	return efi.memmap.desc_size;
+}
+
+int efi_runtime_map_copy(void *buf, size_t bufsz)
+{
+	size_t sz = efi_get_runtime_map_size();
+
+	if (sz > bufsz)
+		sz = bufsz;
+
+	memcpy(buf, efi.memmap.map, sz);
+	return 0;
+}
+
+int __init efi_runtime_map_init(struct kobject *efi_kobj)
+{
+	int i, j, ret = 0;
+	struct efi_runtime_map_entry *entry;
+	efi_memory_desc_t *md;
+
+	if (!efi_enabled(EFI_MEMMAP))
+		return 0;
+
+	map_entries = kcalloc(efi.memmap.nr_map, sizeof(entry), GFP_KERNEL);
+	if (!map_entries) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	i = 0;
+	for_each_efi_memory_desc(md) {
+		entry = add_sysfs_runtime_map_entry(efi_kobj, i, md);
+		if (IS_ERR(entry)) {
+			ret = PTR_ERR(entry);
+			goto out_add_entry;
+		}
+		*(map_entries + i++) = entry;
+	}
+
+	return 0;
+out_add_entry:
+	for (j = i - 1; j >= 0; j--) {
+		entry = *(map_entries + j);
+		kobject_put(&entry->kobj);
+	}
+out:
+	return ret;
+}
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
new file mode 100644
index 000000000..60075e0e4
--- /dev/null
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * runtime-wrappers.c - Runtime Services function call wrappers
+ *
+ * Implementation summary:
+ * -----------------------
+ * 1. When user/kernel thread requests to execute efi_runtime_service(),
+ * enqueue work to efi_rts_wq.
+ * 2. Caller thread waits for completion until the work is finished
+ * because it's dependent on the return status and execution of
+ * efi_runtime_service().
+ * For instance, get_variable() and get_next_variable().
+ *
+ * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * Split off from arch/x86/platform/efi/efi.c
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999-2002 Hewlett-Packard Co.
+ * Copyright (C) 2005-2008 Intel Co.
+ * Copyright (C) 2013 SuSE Labs
+ */
+
+#define pr_fmt(fmt)	"efi: " fmt
+
+#include <linux/bug.h>
+#include <linux/efi.h>
+#include <linux/irqflags.h>
+#include <linux/mutex.h>
+#include <linux/semaphore.h>
+#include <linux/stringify.h>
+#include <linux/workqueue.h>
+#include <linux/completion.h>
+
+#include <asm/efi.h>
+
+/*
+ * Wrap around the new efi_call_virt_generic() macros so that the
+ * code doesn't get too cluttered:
+ */
+#define efi_call_virt(f, args...)   \
+	efi_call_virt_pointer(efi.runtime, f, args)
+#define __efi_call_virt(f, args...) \
+	__efi_call_virt_pointer(efi.runtime, f, args)
+
+struct efi_runtime_work efi_rts_work;
+
+/*
+ * efi_queue_work:	Queue efi_runtime_service() and wait until it's done
+ * @rts:		efi_runtime_service() function identifier
+ * @rts_arg<1-5>:	efi_runtime_service() function arguments
+ *
+ * Accesses to efi_runtime_services() are serialized by a binary
+ * semaphore (efi_runtime_lock) and caller waits until the work is
+ * finished, hence _only_ one work is queued at a time and the caller
+ * thread waits for completion.
+ */
+#define efi_queue_work(_rts, _arg1, _arg2, _arg3, _arg4, _arg5)		\
+({									\
+	efi_rts_work.status = EFI_ABORTED;				\
+									\
+	if (!efi_enabled(EFI_RUNTIME_SERVICES)) {			\
+		pr_warn_once("EFI Runtime Services are disabled!\n");	\
+		efi_rts_work.status = EFI_DEVICE_ERROR;			\
+		goto exit;						\
+	}								\
+									\
+	init_completion(&efi_rts_work.efi_rts_comp);			\
+	INIT_WORK(&efi_rts_work.work, efi_call_rts);			\
+	efi_rts_work.arg1 = _arg1;					\
+	efi_rts_work.arg2 = _arg2;					\
+	efi_rts_work.arg3 = _arg3;					\
+	efi_rts_work.arg4 = _arg4;					\
+	efi_rts_work.arg5 = _arg5;					\
+	efi_rts_work.efi_rts_id = _rts;					\
+									\
+	/*								\
+	 * queue_work() returns 0 if work was already on queue,         \
+	 * _ideally_ this should never happen.                          \
+	 */								\
+	if (queue_work(efi_rts_wq, &efi_rts_work.work))			\
+		wait_for_completion(&efi_rts_work.efi_rts_comp);	\
+	else								\
+		pr_err("Failed to queue work to efi_rts_wq.\n");	\
+									\
+exit:									\
+	efi_rts_work.efi_rts_id = EFI_NONE;				\
+	efi_rts_work.status;						\
+})
+
+#ifndef arch_efi_save_flags
+#define arch_efi_save_flags(state_flags)	local_save_flags(state_flags)
+#define arch_efi_restore_flags(state_flags)	local_irq_restore(state_flags)
+#endif
+
+unsigned long efi_call_virt_save_flags(void)
+{
+	unsigned long flags;
+
+	arch_efi_save_flags(flags);
+	return flags;
+}
+
+void efi_call_virt_check_flags(unsigned long flags, const char *call)
+{
+	unsigned long cur_flags, mismatch;
+
+	cur_flags = efi_call_virt_save_flags();
+
+	mismatch = flags ^ cur_flags;
+	if (!WARN_ON_ONCE(mismatch & ARCH_EFI_IRQ_FLAGS_MASK))
+		return;
+
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_NOW_UNRELIABLE);
+	pr_err_ratelimited(FW_BUG "IRQ flags corrupted (0x%08lx=>0x%08lx) by EFI %s\n",
+			   flags, cur_flags, call);
+	arch_efi_restore_flags(flags);
+}
+
+/*
+ * According to section 7.1 of the UEFI spec, Runtime Services are not fully
+ * reentrant, and there are particular combinations of calls that need to be
+ * serialized. (source: UEFI Specification v2.4A)
+ *
+ * Table 31. Rules for Reentry Into Runtime Services
+ * +------------------------------------+-------------------------------+
+ * | If previous call is busy in	| Forbidden to call		|
+ * +------------------------------------+-------------------------------+
+ * | Any				| SetVirtualAddressMap()	|
+ * +------------------------------------+-------------------------------+
+ * | ConvertPointer()			| ConvertPointer()		|
+ * +------------------------------------+-------------------------------+
+ * | SetVariable()			| ResetSystem()			|
+ * | UpdateCapsule()			|				|
+ * | SetTime()				|				|
+ * | SetWakeupTime()			|				|
+ * | GetNextHighMonotonicCount()	|				|
+ * +------------------------------------+-------------------------------+
+ * | GetVariable()			| GetVariable()			|
+ * | GetNextVariableName()		| GetNextVariableName()		|
+ * | SetVariable()			| SetVariable()			|
+ * | QueryVariableInfo()		| QueryVariableInfo()		|
+ * | UpdateCapsule()			| UpdateCapsule()		|
+ * | QueryCapsuleCapabilities()		| QueryCapsuleCapabilities()	|
+ * | GetNextHighMonotonicCount()	| GetNextHighMonotonicCount()	|
+ * +------------------------------------+-------------------------------+
+ * | GetTime()				| GetTime()			|
+ * | SetTime()				| SetTime()			|
+ * | GetWakeupTime()			| GetWakeupTime()		|
+ * | SetWakeupTime()			| SetWakeupTime()		|
+ * +------------------------------------+-------------------------------+
+ *
+ * Due to the fact that the EFI pstore may write to the variable store in
+ * interrupt context, we need to use a lock for at least the groups that
+ * contain SetVariable() and QueryVariableInfo(). That leaves little else, as
+ * none of the remaining functions are actually ever called at runtime.
+ * So let's just use a single lock to serialize all Runtime Services calls.
+ */
+static DEFINE_SEMAPHORE(efi_runtime_lock);
+
+/*
+ * Expose the EFI runtime lock to the UV platform
+ */
+#ifdef CONFIG_X86_UV
+extern struct semaphore __efi_uv_runtime_lock __alias(efi_runtime_lock);
+#endif
+
+/*
+ * Calls the appropriate efi_runtime_service() with the appropriate
+ * arguments.
+ *
+ * Semantics followed by efi_call_rts() to understand efi_runtime_work:
+ * 1. If argument was a pointer, recast it from void pointer to original
+ * pointer type.
+ * 2. If argument was a value, recast it from void pointer to original
+ * pointer type and dereference it.
+ */
+static void efi_call_rts(struct work_struct *work)
+{
+	void *arg1, *arg2, *arg3, *arg4, *arg5;
+	efi_status_t status = EFI_NOT_FOUND;
+
+	arg1 = efi_rts_work.arg1;
+	arg2 = efi_rts_work.arg2;
+	arg3 = efi_rts_work.arg3;
+	arg4 = efi_rts_work.arg4;
+	arg5 = efi_rts_work.arg5;
+
+	switch (efi_rts_work.efi_rts_id) {
+	case EFI_GET_TIME:
+		status = efi_call_virt(get_time, (efi_time_t *)arg1,
+				       (efi_time_cap_t *)arg2);
+		break;
+	case EFI_SET_TIME:
+		status = efi_call_virt(set_time, (efi_time_t *)arg1);
+		break;
+	case EFI_GET_WAKEUP_TIME:
+		status = efi_call_virt(get_wakeup_time, (efi_bool_t *)arg1,
+				       (efi_bool_t *)arg2, (efi_time_t *)arg3);
+		break;
+	case EFI_SET_WAKEUP_TIME:
+		status = efi_call_virt(set_wakeup_time, *(efi_bool_t *)arg1,
+				       (efi_time_t *)arg2);
+		break;
+	case EFI_GET_VARIABLE:
+		status = efi_call_virt(get_variable, (efi_char16_t *)arg1,
+				       (efi_guid_t *)arg2, (u32 *)arg3,
+				       (unsigned long *)arg4, (void *)arg5);
+		break;
+	case EFI_GET_NEXT_VARIABLE:
+		status = efi_call_virt(get_next_variable, (unsigned long *)arg1,
+				       (efi_char16_t *)arg2,
+				       (efi_guid_t *)arg3);
+		break;
+	case EFI_SET_VARIABLE:
+		status = efi_call_virt(set_variable, (efi_char16_t *)arg1,
+				       (efi_guid_t *)arg2, *(u32 *)arg3,
+				       *(unsigned long *)arg4, (void *)arg5);
+		break;
+	case EFI_QUERY_VARIABLE_INFO:
+		status = efi_call_virt(query_variable_info, *(u32 *)arg1,
+				       (u64 *)arg2, (u64 *)arg3, (u64 *)arg4);
+		break;
+	case EFI_GET_NEXT_HIGH_MONO_COUNT:
+		status = efi_call_virt(get_next_high_mono_count, (u32 *)arg1);
+		break;
+	case EFI_UPDATE_CAPSULE:
+		status = efi_call_virt(update_capsule,
+				       (efi_capsule_header_t **)arg1,
+				       *(unsigned long *)arg2,
+				       *(unsigned long *)arg3);
+		break;
+	case EFI_QUERY_CAPSULE_CAPS:
+		status = efi_call_virt(query_capsule_caps,
+				       (efi_capsule_header_t **)arg1,
+				       *(unsigned long *)arg2, (u64 *)arg3,
+				       (int *)arg4);
+		break;
+	default:
+		/*
+		 * Ideally, we should never reach here because a caller of this
+		 * function should have put the right efi_runtime_service()
+		 * function identifier into efi_rts_work->efi_rts_id
+		 */
+		pr_err("Requested executing invalid EFI Runtime Service.\n");
+	}
+	efi_rts_work.status = status;
+	complete(&efi_rts_work.efi_rts_comp);
+}
+
+static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_GET_TIME, tm, tc, NULL, NULL, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_set_time(efi_time_t *tm)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_SET_TIME, tm, NULL, NULL, NULL, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_get_wakeup_time(efi_bool_t *enabled,
+					     efi_bool_t *pending,
+					     efi_time_t *tm)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_GET_WAKEUP_TIME, enabled, pending, tm, NULL,
+				NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_SET_WAKEUP_TIME, &enabled, tm, NULL, NULL,
+				NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_get_variable(efi_char16_t *name,
+					  efi_guid_t *vendor,
+					  u32 *attr,
+					  unsigned long *data_size,
+					  void *data)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_GET_VARIABLE, name, vendor, attr, data_size,
+				data);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_get_next_variable(unsigned long *name_size,
+					       efi_char16_t *name,
+					       efi_guid_t *vendor)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_GET_NEXT_VARIABLE, name_size, name, vendor,
+				NULL, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_set_variable(efi_char16_t *name,
+					  efi_guid_t *vendor,
+					  u32 attr,
+					  unsigned long data_size,
+					  void *data)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_SET_VARIABLE, name, vendor, &attr, &data_size,
+				data);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t
+virt_efi_set_variable_nonblocking(efi_char16_t *name, efi_guid_t *vendor,
+				  u32 attr, unsigned long data_size,
+				  void *data)
+{
+	efi_status_t status;
+
+	if (down_trylock(&efi_runtime_lock))
+		return EFI_NOT_READY;
+
+	status = efi_call_virt(set_variable, name, vendor, attr, data_size,
+			       data);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+
+static efi_status_t virt_efi_query_variable_info(u32 attr,
+						 u64 *storage_space,
+						 u64 *remaining_space,
+						 u64 *max_variable_size)
+{
+	efi_status_t status;
+
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_QUERY_VARIABLE_INFO, &attr, storage_space,
+				remaining_space, max_variable_size, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t
+virt_efi_query_variable_info_nonblocking(u32 attr,
+					 u64 *storage_space,
+					 u64 *remaining_space,
+					 u64 *max_variable_size)
+{
+	efi_status_t status;
+
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	if (down_trylock(&efi_runtime_lock))
+		return EFI_NOT_READY;
+
+	status = efi_call_virt(query_variable_info, attr, storage_space,
+			       remaining_space, max_variable_size);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_get_next_high_mono_count(u32 *count)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_GET_NEXT_HIGH_MONO_COUNT, count, NULL, NULL,
+				NULL, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static void virt_efi_reset_system(int reset_type,
+				  efi_status_t status,
+				  unsigned long data_size,
+				  efi_char16_t *data)
+{
+	if (down_trylock(&efi_runtime_lock)) {
+		pr_warn("failed to invoke the reset_system() runtime service:\n"
+			"could not get exclusive access to the firmware\n");
+		return;
+	}
+	efi_rts_work.efi_rts_id = EFI_RESET_SYSTEM;
+	__efi_call_virt(reset_system, reset_type, status, data_size, data);
+	up(&efi_runtime_lock);
+}
+
+static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules,
+					    unsigned long count,
+					    unsigned long sg_list)
+{
+	efi_status_t status;
+
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_UPDATE_CAPSULE, capsules, &count, &sg_list,
+				NULL, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules,
+						unsigned long count,
+						u64 *max_size,
+						int *reset_type)
+{
+	efi_status_t status;
+
+	if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
+		return EFI_UNSUPPORTED;
+
+	if (down_interruptible(&efi_runtime_lock))
+		return EFI_ABORTED;
+	status = efi_queue_work(EFI_QUERY_CAPSULE_CAPS, capsules, &count,
+				max_size, reset_type, NULL);
+	up(&efi_runtime_lock);
+	return status;
+}
+
+void efi_native_runtime_setup(void)
+{
+	efi.get_time = virt_efi_get_time;
+	efi.set_time = virt_efi_set_time;
+	efi.get_wakeup_time = virt_efi_get_wakeup_time;
+	efi.set_wakeup_time = virt_efi_set_wakeup_time;
+	efi.get_variable = virt_efi_get_variable;
+	efi.get_next_variable = virt_efi_get_next_variable;
+	efi.set_variable = virt_efi_set_variable;
+	efi.set_variable_nonblocking = virt_efi_set_variable_nonblocking;
+	efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
+	efi.reset_system = virt_efi_reset_system;
+	efi.query_variable_info = virt_efi_query_variable_info;
+	efi.query_variable_info_nonblocking = virt_efi_query_variable_info_nonblocking;
+	efi.update_capsule = virt_efi_update_capsule;
+	efi.query_capsule_caps = virt_efi_query_capsule_caps;
+}
diff --git a/drivers/firmware/efi/test/Makefile b/drivers/firmware/efi/test/Makefile
new file mode 100644
index 000000000..419708855
--- /dev/null
+++ b/drivers/firmware/efi/test/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_EFI_TEST)			+= efi_test.o
diff --git a/drivers/firmware/efi/test/efi_test.c b/drivers/firmware/efi/test/efi_test.c
new file mode 100644
index 000000000..ddf9eae39
--- /dev/null
+++ b/drivers/firmware/efi/test/efi_test.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * EFI Test Driver for Runtime Services
+ *
+ * Copyright(C) 2012-2016 Canonical Ltd.
+ *
+ * This driver exports EFI runtime services interfaces into userspace, which
+ * allow to use and test UEFI runtime services provided by firmware.
+ *
+ */
+
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/efi.h>
+#include <linux/security.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include "efi_test.h"
+
+MODULE_AUTHOR("Ivan Hu <ivan.hu@canonical.com>");
+MODULE_DESCRIPTION("EFI Test Driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Count the bytes in 'str', including the terminating NULL.
+ *
+ * Note this function returns the number of *bytes*, not the number of
+ * ucs2 characters.
+ */
+static inline size_t user_ucs2_strsize(efi_char16_t  __user *str)
+{
+	efi_char16_t *s = str, c;
+	size_t len;
+
+	if (!str)
+		return 0;
+
+	/* Include terminating NULL */
+	len = sizeof(efi_char16_t);
+
+	if (get_user(c, s++)) {
+		/* Can't read userspace memory for size */
+		return 0;
+	}
+
+	while (c != 0) {
+		if (get_user(c, s++)) {
+			/* Can't read userspace memory for size */
+			return 0;
+		}
+		len += sizeof(efi_char16_t);
+	}
+	return len;
+}
+
+/*
+ * Allocate a buffer and copy a ucs2 string from user space into it.
+ */
+static inline int
+copy_ucs2_from_user_len(efi_char16_t **dst, efi_char16_t __user *src,
+			size_t len)
+{
+	efi_char16_t *buf;
+
+	if (!src) {
+		*dst = NULL;
+		return 0;
+	}
+
+	buf = memdup_user(src, len);
+	if (IS_ERR(buf)) {
+		*dst = NULL;
+		return PTR_ERR(buf);
+	}
+	*dst = buf;
+
+	return 0;
+}
+
+/*
+ * Count the bytes in 'str', including the terminating NULL.
+ *
+ * Just a wrap for user_ucs2_strsize
+ */
+static inline int
+get_ucs2_strsize_from_user(efi_char16_t __user *src, size_t *len)
+{
+	*len = user_ucs2_strsize(src);
+	if (*len == 0)
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Calculate the required buffer allocation size and copy a ucs2 string
+ * from user space into it.
+ *
+ * This function differs from copy_ucs2_from_user_len() because it
+ * calculates the size of the buffer to allocate by taking the length of
+ * the string 'src'.
+ *
+ * If a non-zero value is returned, the caller MUST NOT access 'dst'.
+ *
+ * It is the caller's responsibility to free 'dst'.
+ */
+static inline int
+copy_ucs2_from_user(efi_char16_t **dst, efi_char16_t __user *src)
+{
+	size_t len;
+
+	len = user_ucs2_strsize(src);
+	if (len == 0)
+		return -EFAULT;
+	return copy_ucs2_from_user_len(dst, src, len);
+}
+
+/*
+ * Copy a ucs2 string to a user buffer.
+ *
+ * This function is a simple wrapper around copy_to_user() that does
+ * nothing if 'src' is NULL, which is useful for reducing the amount of
+ * NULL checking the caller has to do.
+ *
+ * 'len' specifies the number of bytes to copy.
+ */
+static inline int
+copy_ucs2_to_user_len(efi_char16_t __user *dst, efi_char16_t *src, size_t len)
+{
+	if (!src)
+		return 0;
+
+	return copy_to_user(dst, src, len);
+}
+
+static long efi_runtime_get_variable(unsigned long arg)
+{
+	struct efi_getvariable __user *getvariable_user;
+	struct efi_getvariable getvariable;
+	unsigned long datasize = 0, prev_datasize, *dz;
+	efi_guid_t vendor_guid, *vd = NULL;
+	efi_status_t status;
+	efi_char16_t *name = NULL;
+	u32 attr, *at;
+	void *data = NULL;
+	int rv = 0;
+
+	getvariable_user = (struct efi_getvariable __user *)arg;
+
+	if (copy_from_user(&getvariable, getvariable_user,
+			   sizeof(getvariable)))
+		return -EFAULT;
+	if (getvariable.data_size &&
+	    get_user(datasize, getvariable.data_size))
+		return -EFAULT;
+	if (getvariable.vendor_guid) {
+		if (copy_from_user(&vendor_guid, getvariable.vendor_guid,
+					sizeof(vendor_guid)))
+			return -EFAULT;
+		vd = &vendor_guid;
+	}
+
+	if (getvariable.variable_name) {
+		rv = copy_ucs2_from_user(&name, getvariable.variable_name);
+		if (rv)
+			return rv;
+	}
+
+	at = getvariable.attributes ? &attr : NULL;
+	dz = getvariable.data_size ? &datasize : NULL;
+
+	if (getvariable.data_size && getvariable.data) {
+		data = kmalloc(datasize, GFP_KERNEL);
+		if (!data) {
+			kfree(name);
+			return -ENOMEM;
+		}
+	}
+
+	prev_datasize = datasize;
+	status = efi.get_variable(name, vd, at, dz, data);
+	kfree(name);
+
+	if (put_user(status, getvariable.status)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	if (status != EFI_SUCCESS) {
+		if (status == EFI_BUFFER_TOO_SMALL) {
+			if (dz && put_user(datasize, getvariable.data_size)) {
+				rv = -EFAULT;
+				goto out;
+			}
+		}
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (prev_datasize < datasize) {
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (data) {
+		if (copy_to_user(getvariable.data, data, datasize)) {
+			rv = -EFAULT;
+			goto out;
+		}
+	}
+
+	if (at && put_user(attr, getvariable.attributes)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	if (dz && put_user(datasize, getvariable.data_size))
+		rv = -EFAULT;
+
+out:
+	kfree(data);
+	return rv;
+
+}
+
+static long efi_runtime_set_variable(unsigned long arg)
+{
+	struct efi_setvariable __user *setvariable_user;
+	struct efi_setvariable setvariable;
+	efi_guid_t vendor_guid;
+	efi_status_t status;
+	efi_char16_t *name = NULL;
+	void *data;
+	int rv = 0;
+
+	setvariable_user = (struct efi_setvariable __user *)arg;
+
+	if (copy_from_user(&setvariable, setvariable_user, sizeof(setvariable)))
+		return -EFAULT;
+	if (copy_from_user(&vendor_guid, setvariable.vendor_guid,
+				sizeof(vendor_guid)))
+		return -EFAULT;
+
+	if (setvariable.variable_name) {
+		rv = copy_ucs2_from_user(&name, setvariable.variable_name);
+		if (rv)
+			return rv;
+	}
+
+	data = memdup_user(setvariable.data, setvariable.data_size);
+	if (IS_ERR(data)) {
+		kfree(name);
+		return PTR_ERR(data);
+	}
+
+	status = efi.set_variable(name, &vendor_guid,
+				setvariable.attributes,
+				setvariable.data_size, data);
+
+	if (put_user(status, setvariable.status)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	rv = status == EFI_SUCCESS ? 0 : -EINVAL;
+
+out:
+	kfree(data);
+	kfree(name);
+
+	return rv;
+}
+
+static long efi_runtime_get_time(unsigned long arg)
+{
+	struct efi_gettime __user *gettime_user;
+	struct efi_gettime  gettime;
+	efi_status_t status;
+	efi_time_cap_t cap;
+	efi_time_t efi_time;
+
+	gettime_user = (struct efi_gettime __user *)arg;
+	if (copy_from_user(&gettime, gettime_user, sizeof(gettime)))
+		return -EFAULT;
+
+	status = efi.get_time(gettime.time ? &efi_time : NULL,
+			      gettime.capabilities ? &cap : NULL);
+
+	if (put_user(status, gettime.status))
+		return -EFAULT;
+
+	if (status != EFI_SUCCESS)
+		return -EINVAL;
+
+	if (gettime.capabilities) {
+		efi_time_cap_t __user *cap_local;
+
+		cap_local = (efi_time_cap_t *)gettime.capabilities;
+		if (put_user(cap.resolution, &(cap_local->resolution)) ||
+			put_user(cap.accuracy, &(cap_local->accuracy)) ||
+			put_user(cap.sets_to_zero, &(cap_local->sets_to_zero)))
+			return -EFAULT;
+	}
+	if (gettime.time) {
+		if (copy_to_user(gettime.time, &efi_time, sizeof(efi_time_t)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static long efi_runtime_set_time(unsigned long arg)
+{
+	struct efi_settime __user *settime_user;
+	struct efi_settime settime;
+	efi_status_t status;
+	efi_time_t efi_time;
+
+	settime_user = (struct efi_settime __user *)arg;
+	if (copy_from_user(&settime, settime_user, sizeof(settime)))
+		return -EFAULT;
+	if (copy_from_user(&efi_time, settime.time,
+					sizeof(efi_time_t)))
+		return -EFAULT;
+	status = efi.set_time(&efi_time);
+
+	if (put_user(status, settime.status))
+		return -EFAULT;
+
+	return status == EFI_SUCCESS ? 0 : -EINVAL;
+}
+
+static long efi_runtime_get_waketime(unsigned long arg)
+{
+	struct efi_getwakeuptime __user *getwakeuptime_user;
+	struct efi_getwakeuptime getwakeuptime;
+	efi_bool_t enabled, pending;
+	efi_status_t status;
+	efi_time_t efi_time;
+
+	getwakeuptime_user = (struct efi_getwakeuptime __user *)arg;
+	if (copy_from_user(&getwakeuptime, getwakeuptime_user,
+				sizeof(getwakeuptime)))
+		return -EFAULT;
+
+	status = efi.get_wakeup_time(
+		getwakeuptime.enabled ? (efi_bool_t *)&enabled : NULL,
+		getwakeuptime.pending ? (efi_bool_t *)&pending : NULL,
+		getwakeuptime.time ? &efi_time : NULL);
+
+	if (put_user(status, getwakeuptime.status))
+		return -EFAULT;
+
+	if (status != EFI_SUCCESS)
+		return -EINVAL;
+
+	if (getwakeuptime.enabled && put_user(enabled,
+						getwakeuptime.enabled))
+		return -EFAULT;
+
+	if (getwakeuptime.time) {
+		if (copy_to_user(getwakeuptime.time, &efi_time,
+				sizeof(efi_time_t)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static long efi_runtime_set_waketime(unsigned long arg)
+{
+	struct efi_setwakeuptime __user *setwakeuptime_user;
+	struct efi_setwakeuptime setwakeuptime;
+	efi_bool_t enabled;
+	efi_status_t status;
+	efi_time_t efi_time;
+
+	setwakeuptime_user = (struct efi_setwakeuptime __user *)arg;
+
+	if (copy_from_user(&setwakeuptime, setwakeuptime_user,
+				sizeof(setwakeuptime)))
+		return -EFAULT;
+
+	enabled = setwakeuptime.enabled;
+	if (setwakeuptime.time) {
+		if (copy_from_user(&efi_time, setwakeuptime.time,
+					sizeof(efi_time_t)))
+			return -EFAULT;
+
+		status = efi.set_wakeup_time(enabled, &efi_time);
+	} else
+		status = efi.set_wakeup_time(enabled, NULL);
+
+	if (put_user(status, setwakeuptime.status))
+		return -EFAULT;
+
+	return status == EFI_SUCCESS ? 0 : -EINVAL;
+}
+
+static long efi_runtime_get_nextvariablename(unsigned long arg)
+{
+	struct efi_getnextvariablename __user *getnextvariablename_user;
+	struct efi_getnextvariablename getnextvariablename;
+	unsigned long name_size, prev_name_size = 0, *ns = NULL;
+	efi_status_t status;
+	efi_guid_t *vd = NULL;
+	efi_guid_t vendor_guid;
+	efi_char16_t *name = NULL;
+	int rv = 0;
+
+	getnextvariablename_user = (struct efi_getnextvariablename __user *)arg;
+
+	if (copy_from_user(&getnextvariablename, getnextvariablename_user,
+			   sizeof(getnextvariablename)))
+		return -EFAULT;
+
+	if (getnextvariablename.variable_name_size) {
+		if (get_user(name_size, getnextvariablename.variable_name_size))
+			return -EFAULT;
+		ns = &name_size;
+		prev_name_size = name_size;
+	}
+
+	if (getnextvariablename.vendor_guid) {
+		if (copy_from_user(&vendor_guid,
+				getnextvariablename.vendor_guid,
+				sizeof(vendor_guid)))
+			return -EFAULT;
+		vd = &vendor_guid;
+	}
+
+	if (getnextvariablename.variable_name) {
+		size_t name_string_size = 0;
+
+		rv = get_ucs2_strsize_from_user(
+				getnextvariablename.variable_name,
+				&name_string_size);
+		if (rv)
+			return rv;
+		/*
+		 * The name_size may be smaller than the real buffer size where
+		 * variable name located in some use cases. The most typical
+		 * case is passing a 0 to get the required buffer size for the
+		 * 1st time call. So we need to copy the content from user
+		 * space for at least the string size of variable name, or else
+		 * the name passed to UEFI may not be terminated as we expected.
+		 */
+		rv = copy_ucs2_from_user_len(&name,
+				getnextvariablename.variable_name,
+				prev_name_size > name_string_size ?
+				prev_name_size : name_string_size);
+		if (rv)
+			return rv;
+	}
+
+	status = efi.get_next_variable(ns, name, vd);
+
+	if (put_user(status, getnextvariablename.status)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	if (status != EFI_SUCCESS) {
+		if (status == EFI_BUFFER_TOO_SMALL) {
+			if (ns && put_user(*ns,
+				getnextvariablename.variable_name_size)) {
+				rv = -EFAULT;
+				goto out;
+			}
+		}
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (name) {
+		if (copy_ucs2_to_user_len(getnextvariablename.variable_name,
+						name, prev_name_size)) {
+			rv = -EFAULT;
+			goto out;
+		}
+	}
+
+	if (ns) {
+		if (put_user(*ns, getnextvariablename.variable_name_size)) {
+			rv = -EFAULT;
+			goto out;
+		}
+	}
+
+	if (vd) {
+		if (copy_to_user(getnextvariablename.vendor_guid, vd,
+							sizeof(efi_guid_t)))
+			rv = -EFAULT;
+	}
+
+out:
+	kfree(name);
+	return rv;
+}
+
+static long efi_runtime_get_nexthighmonocount(unsigned long arg)
+{
+	struct efi_getnexthighmonotoniccount __user *getnexthighmonocount_user;
+	struct efi_getnexthighmonotoniccount getnexthighmonocount;
+	efi_status_t status;
+	u32 count;
+
+	getnexthighmonocount_user = (struct
+			efi_getnexthighmonotoniccount __user *)arg;
+
+	if (copy_from_user(&getnexthighmonocount,
+			   getnexthighmonocount_user,
+			   sizeof(getnexthighmonocount)))
+		return -EFAULT;
+
+	status = efi.get_next_high_mono_count(
+		getnexthighmonocount.high_count ? &count : NULL);
+
+	if (put_user(status, getnexthighmonocount.status))
+		return -EFAULT;
+
+	if (status != EFI_SUCCESS)
+		return -EINVAL;
+
+	if (getnexthighmonocount.high_count &&
+	    put_user(count, getnexthighmonocount.high_count))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long efi_runtime_reset_system(unsigned long arg)
+{
+	struct efi_resetsystem __user *resetsystem_user;
+	struct efi_resetsystem resetsystem;
+	void *data = NULL;
+
+	resetsystem_user = (struct efi_resetsystem __user *)arg;
+	if (copy_from_user(&resetsystem, resetsystem_user,
+						sizeof(resetsystem)))
+		return -EFAULT;
+	if (resetsystem.data_size != 0) {
+		data = memdup_user((void *)resetsystem.data,
+						resetsystem.data_size);
+		if (IS_ERR(data))
+			return PTR_ERR(data);
+	}
+
+	efi.reset_system(resetsystem.reset_type, resetsystem.status,
+				resetsystem.data_size, (efi_char16_t *)data);
+
+	kfree(data);
+	return 0;
+}
+
+static long efi_runtime_query_variableinfo(unsigned long arg)
+{
+	struct efi_queryvariableinfo __user *queryvariableinfo_user;
+	struct efi_queryvariableinfo queryvariableinfo;
+	efi_status_t status;
+	u64 max_storage, remaining, max_size;
+
+	queryvariableinfo_user = (struct efi_queryvariableinfo __user *)arg;
+
+	if (copy_from_user(&queryvariableinfo, queryvariableinfo_user,
+			   sizeof(queryvariableinfo)))
+		return -EFAULT;
+
+	status = efi.query_variable_info(queryvariableinfo.attributes,
+					 &max_storage, &remaining, &max_size);
+
+	if (put_user(status, queryvariableinfo.status))
+		return -EFAULT;
+
+	if (status != EFI_SUCCESS)
+		return -EINVAL;
+
+	if (put_user(max_storage,
+		     queryvariableinfo.maximum_variable_storage_size))
+		return -EFAULT;
+
+	if (put_user(remaining,
+		     queryvariableinfo.remaining_variable_storage_size))
+		return -EFAULT;
+
+	if (put_user(max_size, queryvariableinfo.maximum_variable_size))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long efi_runtime_query_capsulecaps(unsigned long arg)
+{
+	struct efi_querycapsulecapabilities __user *qcaps_user;
+	struct efi_querycapsulecapabilities qcaps;
+	efi_capsule_header_t *capsules;
+	efi_status_t status;
+	u64 max_size;
+	int i, reset_type;
+	int rv = 0;
+
+	qcaps_user = (struct efi_querycapsulecapabilities __user *)arg;
+
+	if (copy_from_user(&qcaps, qcaps_user, sizeof(qcaps)))
+		return -EFAULT;
+
+	if (qcaps.capsule_count == ULONG_MAX)
+		return -EINVAL;
+
+	capsules = kcalloc(qcaps.capsule_count + 1,
+			   sizeof(efi_capsule_header_t), GFP_KERNEL);
+	if (!capsules)
+		return -ENOMEM;
+
+	for (i = 0; i < qcaps.capsule_count; i++) {
+		efi_capsule_header_t *c;
+		/*
+		 * We cannot dereference qcaps.capsule_header_array directly to
+		 * obtain the address of the capsule as it resides in the
+		 * user space
+		 */
+		if (get_user(c, qcaps.capsule_header_array + i)) {
+			rv = -EFAULT;
+			goto out;
+		}
+		if (copy_from_user(&capsules[i], c,
+				sizeof(efi_capsule_header_t))) {
+			rv = -EFAULT;
+			goto out;
+		}
+	}
+
+	qcaps.capsule_header_array = &capsules;
+
+	status = efi.query_capsule_caps((efi_capsule_header_t **)
+					qcaps.capsule_header_array,
+					qcaps.capsule_count,
+					&max_size, &reset_type);
+
+	if (put_user(status, qcaps.status)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	if (status != EFI_SUCCESS) {
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (put_user(max_size, qcaps.maximum_capsule_size)) {
+		rv = -EFAULT;
+		goto out;
+	}
+
+	if (put_user(reset_type, qcaps.reset_type))
+		rv = -EFAULT;
+
+out:
+	kfree(capsules);
+	return rv;
+}
+
+static long efi_test_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	switch (cmd) {
+	case EFI_RUNTIME_GET_VARIABLE:
+		return efi_runtime_get_variable(arg);
+
+	case EFI_RUNTIME_SET_VARIABLE:
+		return efi_runtime_set_variable(arg);
+
+	case EFI_RUNTIME_GET_TIME:
+		return efi_runtime_get_time(arg);
+
+	case EFI_RUNTIME_SET_TIME:
+		return efi_runtime_set_time(arg);
+
+	case EFI_RUNTIME_GET_WAKETIME:
+		return efi_runtime_get_waketime(arg);
+
+	case EFI_RUNTIME_SET_WAKETIME:
+		return efi_runtime_set_waketime(arg);
+
+	case EFI_RUNTIME_GET_NEXTVARIABLENAME:
+		return efi_runtime_get_nextvariablename(arg);
+
+	case EFI_RUNTIME_GET_NEXTHIGHMONOTONICCOUNT:
+		return efi_runtime_get_nexthighmonocount(arg);
+
+	case EFI_RUNTIME_QUERY_VARIABLEINFO:
+		return efi_runtime_query_variableinfo(arg);
+
+	case EFI_RUNTIME_QUERY_CAPSULECAPABILITIES:
+		return efi_runtime_query_capsulecaps(arg);
+
+	case EFI_RUNTIME_RESET_SYSTEM:
+		return efi_runtime_reset_system(arg);
+	}
+
+	return -ENOTTY;
+}
+
+static int efi_test_open(struct inode *inode, struct file *file)
+{
+	int ret = security_locked_down(LOCKDOWN_EFI_TEST);
+
+	if (ret)
+		return ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+	/*
+	 * nothing special to do here
+	 * We do accept multiple open files at the same time as we
+	 * synchronize on the per call operation.
+	 */
+	return 0;
+}
+
+static int efi_test_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/*
+ *	The various file operations we support.
+ */
+static const struct file_operations efi_test_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= efi_test_ioctl,
+	.open		= efi_test_open,
+	.release	= efi_test_close,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice efi_test_dev = {
+	MISC_DYNAMIC_MINOR,
+	"efi_test",
+	&efi_test_fops
+};
+
+static int __init efi_test_init(void)
+{
+	int ret;
+
+	ret = misc_register(&efi_test_dev);
+	if (ret) {
+		pr_err("efi_test: can't misc_register on minor=%d\n",
+			MISC_DYNAMIC_MINOR);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit efi_test_exit(void)
+{
+	misc_deregister(&efi_test_dev);
+}
+
+module_init(efi_test_init);
+module_exit(efi_test_exit);
diff --git a/drivers/firmware/efi/test/efi_test.h b/drivers/firmware/efi/test/efi_test.h
new file mode 100644
index 000000000..f2446aa1c
--- /dev/null
+++ b/drivers/firmware/efi/test/efi_test.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * EFI Test driver Header
+ *
+ * Copyright(C) 2012-2016 Canonical Ltd.
+ *
+ */
+
+#ifndef _DRIVERS_FIRMWARE_EFI_TEST_H_
+#define _DRIVERS_FIRMWARE_EFI_TEST_H_
+
+#include <linux/efi.h>
+
+struct efi_getvariable {
+	efi_char16_t	*variable_name;
+	efi_guid_t	*vendor_guid;
+	u32		*attributes;
+	unsigned long	*data_size;
+	void		*data;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_setvariable {
+	efi_char16_t	*variable_name;
+	efi_guid_t	*vendor_guid;
+	u32		attributes;
+	unsigned long	data_size;
+	void		*data;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_getnextvariablename {
+	unsigned long	*variable_name_size;
+	efi_char16_t	*variable_name;
+	efi_guid_t	*vendor_guid;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_queryvariableinfo {
+	u32		attributes;
+	u64		*maximum_variable_storage_size;
+	u64		*remaining_variable_storage_size;
+	u64		*maximum_variable_size;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_gettime {
+	efi_time_t	*time;
+	efi_time_cap_t	*capabilities;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_settime {
+	efi_time_t	*time;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_getwakeuptime {
+	efi_bool_t	*enabled;
+	efi_bool_t	*pending;
+	efi_time_t	*time;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_setwakeuptime {
+	efi_bool_t	enabled;
+	efi_time_t	*time;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_getnexthighmonotoniccount {
+	u32		*high_count;
+	efi_status_t	*status;
+} __packed;
+
+struct efi_querycapsulecapabilities {
+	efi_capsule_header_t	**capsule_header_array;
+	unsigned long		capsule_count;
+	u64			*maximum_capsule_size;
+	int			*reset_type;
+	efi_status_t		*status;
+} __packed;
+
+struct efi_resetsystem {
+	int			reset_type;
+	efi_status_t		status;
+	unsigned long		data_size;
+	efi_char16_t		*data;
+} __packed;
+
+#define EFI_RUNTIME_GET_VARIABLE \
+	_IOWR('p', 0x01, struct efi_getvariable)
+#define EFI_RUNTIME_SET_VARIABLE \
+	_IOW('p', 0x02, struct efi_setvariable)
+
+#define EFI_RUNTIME_GET_TIME \
+	_IOR('p', 0x03, struct efi_gettime)
+#define EFI_RUNTIME_SET_TIME \
+	_IOW('p', 0x04, struct efi_settime)
+
+#define EFI_RUNTIME_GET_WAKETIME \
+	_IOR('p', 0x05, struct efi_getwakeuptime)
+#define EFI_RUNTIME_SET_WAKETIME \
+	_IOW('p', 0x06, struct efi_setwakeuptime)
+
+#define EFI_RUNTIME_GET_NEXTVARIABLENAME \
+	_IOWR('p', 0x07, struct efi_getnextvariablename)
+
+#define EFI_RUNTIME_QUERY_VARIABLEINFO \
+	_IOR('p', 0x08, struct efi_queryvariableinfo)
+
+#define EFI_RUNTIME_GET_NEXTHIGHMONOTONICCOUNT \
+	_IOR('p', 0x09, struct efi_getnexthighmonotoniccount)
+
+#define EFI_RUNTIME_QUERY_CAPSULECAPABILITIES \
+	_IOR('p', 0x0A, struct efi_querycapsulecapabilities)
+
+#define EFI_RUNTIME_RESET_SYSTEM \
+	_IOW('p', 0x0B, struct efi_resetsystem)
+
+#endif /* _DRIVERS_FIRMWARE_EFI_TEST_H_ */
diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c
new file mode 100644
index 000000000..e8d69bd54
--- /dev/null
+++ b/drivers/firmware/efi/tpm.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Google, Inc.
+ *     Thiebaud Weksteen <tweek@google.com>
+ */
+
+#define TPM_MEMREMAP(start, size) early_memremap(start, size)
+#define TPM_MEMUNMAP(start, size) early_memunmap(start, size)
+
+#include <asm/early_ioremap.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/tpm_eventlog.h>
+
+int efi_tpm_final_log_size;
+EXPORT_SYMBOL(efi_tpm_final_log_size);
+
+static int __init tpm2_calc_event_log_size(void *data, int count, void *size_info)
+{
+	struct tcg_pcr_event2_head *header;
+	int event_size, size = 0;
+
+	while (count > 0) {
+		header = data + size;
+		event_size = __calc_tpm2_event_size(header, size_info, true);
+		if (event_size == 0)
+			return -1;
+		size += event_size;
+		count--;
+	}
+
+	return size;
+}
+
+/*
+ * Reserve the memory associated with the TPM Event Log configuration table.
+ */
+int __init efi_tpm_eventlog_init(void)
+{
+	struct linux_efi_tpm_eventlog *log_tbl;
+	struct efi_tcg2_final_events_table *final_tbl;
+	int tbl_size;
+	int ret = 0;
+
+	if (efi.tpm_log == EFI_INVALID_TABLE_ADDR) {
+		/*
+		 * We can't calculate the size of the final events without the
+		 * first entry in the TPM log, so bail here.
+		 */
+		return 0;
+	}
+
+	log_tbl = early_memremap(efi.tpm_log, sizeof(*log_tbl));
+	if (!log_tbl) {
+		pr_err("Failed to map TPM Event Log table @ 0x%lx\n",
+		       efi.tpm_log);
+		efi.tpm_log = EFI_INVALID_TABLE_ADDR;
+		return -ENOMEM;
+	}
+
+	tbl_size = sizeof(*log_tbl) + log_tbl->size;
+	memblock_reserve(efi.tpm_log, tbl_size);
+
+	if (efi.tpm_final_log == EFI_INVALID_TABLE_ADDR) {
+		pr_info("TPM Final Events table not present\n");
+		goto out;
+	} else if (log_tbl->version != EFI_TCG2_EVENT_LOG_FORMAT_TCG_2) {
+		pr_warn(FW_BUG "TPM Final Events table invalid\n");
+		goto out;
+	}
+
+	final_tbl = early_memremap(efi.tpm_final_log, sizeof(*final_tbl));
+
+	if (!final_tbl) {
+		pr_err("Failed to map TPM Final Event Log table @ 0x%lx\n",
+		       efi.tpm_final_log);
+		efi.tpm_final_log = EFI_INVALID_TABLE_ADDR;
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	tbl_size = 0;
+	if (final_tbl->nr_events != 0) {
+		void *events = (void *)efi.tpm_final_log
+				+ sizeof(final_tbl->version)
+				+ sizeof(final_tbl->nr_events);
+
+		tbl_size = tpm2_calc_event_log_size(events,
+						    final_tbl->nr_events,
+						    log_tbl->log);
+	}
+
+	if (tbl_size < 0) {
+		pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n");
+		ret = -EINVAL;
+		goto out_calc;
+	}
+
+	memblock_reserve(efi.tpm_final_log,
+			 tbl_size + sizeof(*final_tbl));
+	efi_tpm_final_log_size = tbl_size;
+
+out_calc:
+	early_memunmap(final_tbl, sizeof(*final_tbl));
+out:
+	early_memunmap(log_tbl, sizeof(*log_tbl));
+	return ret;
+}
+
diff --git a/drivers/firmware/efi/vars.c b/drivers/firmware/efi/vars.c
new file mode 100644
index 000000000..cae590bd0
--- /dev/null
+++ b/drivers/firmware/efi/vars.c
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Originally from efivars.c
+ *
+ * Copyright (C) 2001,2003,2004 Dell <Matt_Domsch@dell.com>
+ * Copyright (C) 2004 Intel Corporation <matthew.e.tolentino@intel.com>
+ */
+
+#include <linux/capability.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/efi.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/ctype.h>
+#include <linux/ucs2_string.h>
+
+/* Private pointer to registered efivars */
+static struct efivars *__efivars;
+
+/*
+ * efivars_lock protects three things:
+ * 1) efivarfs_list and efivars_sysfs_list
+ * 2) ->ops calls
+ * 3) (un)registration of __efivars
+ */
+static DEFINE_SEMAPHORE(efivars_lock);
+
+static bool
+validate_device_path(efi_char16_t *var_name, int match, u8 *buffer,
+		     unsigned long len)
+{
+	struct efi_generic_dev_path *node;
+	int offset = 0;
+
+	node = (struct efi_generic_dev_path *)buffer;
+
+	if (len < sizeof(*node))
+		return false;
+
+	while (offset <= len - sizeof(*node) &&
+	       node->length >= sizeof(*node) &&
+		node->length <= len - offset) {
+		offset += node->length;
+
+		if ((node->type == EFI_DEV_END_PATH ||
+		     node->type == EFI_DEV_END_PATH2) &&
+		    node->sub_type == EFI_DEV_END_ENTIRE)
+			return true;
+
+		node = (struct efi_generic_dev_path *)(buffer + offset);
+	}
+
+	/*
+	 * If we're here then either node->length pointed past the end
+	 * of the buffer or we reached the end of the buffer without
+	 * finding a device path end node.
+	 */
+	return false;
+}
+
+static bool
+validate_boot_order(efi_char16_t *var_name, int match, u8 *buffer,
+		    unsigned long len)
+{
+	/* An array of 16-bit integers */
+	if ((len % 2) != 0)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_load_option(efi_char16_t *var_name, int match, u8 *buffer,
+		     unsigned long len)
+{
+	u16 filepathlength;
+	int i, desclength = 0, namelen;
+
+	namelen = ucs2_strnlen(var_name, EFI_VAR_NAME_LEN);
+
+	/* Either "Boot" or "Driver" followed by four digits of hex */
+	for (i = match; i < match+4; i++) {
+		if (var_name[i] > 127 ||
+		    hex_to_bin(var_name[i] & 0xff) < 0)
+			return true;
+	}
+
+	/* Reject it if there's 4 digits of hex and then further content */
+	if (namelen > match + 4)
+		return false;
+
+	/* A valid entry must be at least 8 bytes */
+	if (len < 8)
+		return false;
+
+	filepathlength = buffer[4] | buffer[5] << 8;
+
+	/*
+	 * There's no stored length for the description, so it has to be
+	 * found by hand
+	 */
+	desclength = ucs2_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
+
+	/* Each boot entry must have a descriptor */
+	if (!desclength)
+		return false;
+
+	/*
+	 * If the sum of the length of the description, the claimed filepath
+	 * length and the original header are greater than the length of the
+	 * variable, it's malformed
+	 */
+	if ((desclength + filepathlength + 6) > len)
+		return false;
+
+	/*
+	 * And, finally, check the filepath
+	 */
+	return validate_device_path(var_name, match, buffer + desclength + 6,
+				    filepathlength);
+}
+
+static bool
+validate_uint16(efi_char16_t *var_name, int match, u8 *buffer,
+		unsigned long len)
+{
+	/* A single 16-bit integer */
+	if (len != 2)
+		return false;
+
+	return true;
+}
+
+static bool
+validate_ascii_string(efi_char16_t *var_name, int match, u8 *buffer,
+		      unsigned long len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (buffer[i] > 127)
+			return false;
+
+		if (buffer[i] == 0)
+			return true;
+	}
+
+	return false;
+}
+
+struct variable_validate {
+	efi_guid_t vendor;
+	char *name;
+	bool (*validate)(efi_char16_t *var_name, int match, u8 *data,
+			 unsigned long len);
+};
+
+/*
+ * This is the list of variables we need to validate, as well as the
+ * whitelist for what we think is safe not to default to immutable.
+ *
+ * If it has a validate() method that's not NULL, it'll go into the
+ * validation routine.  If not, it is assumed valid, but still used for
+ * whitelisting.
+ *
+ * Note that it's sorted by {vendor,name}, but globbed names must come after
+ * any other name with the same prefix.
+ */
+static const struct variable_validate variable_validate[] = {
+	{ EFI_GLOBAL_VARIABLE_GUID, "BootNext", validate_uint16 },
+	{ EFI_GLOBAL_VARIABLE_GUID, "BootOrder", validate_boot_order },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Boot*", validate_load_option },
+	{ EFI_GLOBAL_VARIABLE_GUID, "DriverOrder", validate_boot_order },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Driver*", validate_load_option },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConIn", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConInDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConOut", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ConOutDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOut", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "ErrOutDev", validate_device_path },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Lang", validate_ascii_string },
+	{ EFI_GLOBAL_VARIABLE_GUID, "OsIndications", NULL },
+	{ EFI_GLOBAL_VARIABLE_GUID, "PlatformLang", validate_ascii_string },
+	{ EFI_GLOBAL_VARIABLE_GUID, "Timeout", validate_uint16 },
+	{ LINUX_EFI_CRASH_GUID, "*", NULL },
+	{ NULL_GUID, "", NULL },
+};
+
+/*
+ * Check if @var_name matches the pattern given in @match_name.
+ *
+ * @var_name: an array of @len non-NUL characters.
+ * @match_name: a NUL-terminated pattern string, optionally ending in "*". A
+ *              final "*" character matches any trailing characters @var_name,
+ *              including the case when there are none left in @var_name.
+ * @match: on output, the number of non-wildcard characters in @match_name
+ *         that @var_name matches, regardless of the return value.
+ * @return: whether @var_name fully matches @match_name.
+ */
+static bool
+variable_matches(const char *var_name, size_t len, const char *match_name,
+		 int *match)
+{
+	for (*match = 0; ; (*match)++) {
+		char c = match_name[*match];
+
+		switch (c) {
+		case '*':
+			/* Wildcard in @match_name means we've matched. */
+			return true;
+
+		case '\0':
+			/* @match_name has ended. Has @var_name too? */
+			return (*match == len);
+
+		default:
+			/*
+			 * We've reached a non-wildcard char in @match_name.
+			 * Continue only if there's an identical character in
+			 * @var_name.
+			 */
+			if (*match < len && c == var_name[*match])
+				continue;
+			return false;
+		}
+	}
+}
+
+bool
+efivar_validate(efi_guid_t vendor, efi_char16_t *var_name, u8 *data,
+		unsigned long data_size)
+{
+	int i;
+	unsigned long utf8_size;
+	u8 *utf8_name;
+
+	utf8_size = ucs2_utf8size(var_name);
+	utf8_name = kmalloc(utf8_size + 1, GFP_KERNEL);
+	if (!utf8_name)
+		return false;
+
+	ucs2_as_utf8(utf8_name, var_name, utf8_size);
+	utf8_name[utf8_size] = '\0';
+
+	for (i = 0; variable_validate[i].name[0] != '\0'; i++) {
+		const char *name = variable_validate[i].name;
+		int match = 0;
+
+		if (efi_guidcmp(vendor, variable_validate[i].vendor))
+			continue;
+
+		if (variable_matches(utf8_name, utf8_size+1, name, &match)) {
+			if (variable_validate[i].validate == NULL)
+				break;
+			kfree(utf8_name);
+			return variable_validate[i].validate(var_name, match,
+							     data, data_size);
+		}
+	}
+	kfree(utf8_name);
+	return true;
+}
+EXPORT_SYMBOL_GPL(efivar_validate);
+
+bool
+efivar_variable_is_removable(efi_guid_t vendor, const char *var_name,
+			     size_t len)
+{
+	int i;
+	bool found = false;
+	int match = 0;
+
+	/*
+	 * Check if our variable is in the validated variables list
+	 */
+	for (i = 0; variable_validate[i].name[0] != '\0'; i++) {
+		if (efi_guidcmp(variable_validate[i].vendor, vendor))
+			continue;
+
+		if (variable_matches(var_name, len,
+				     variable_validate[i].name, &match)) {
+			found = true;
+			break;
+		}
+	}
+
+	/*
+	 * If it's in our list, it is removable.
+	 */
+	return found;
+}
+EXPORT_SYMBOL_GPL(efivar_variable_is_removable);
+
+static efi_status_t
+check_var_size(u32 attributes, unsigned long size)
+{
+	const struct efivar_operations *fops;
+
+	if (!__efivars)
+		return EFI_UNSUPPORTED;
+
+	fops = __efivars->ops;
+
+	if (!fops->query_variable_store)
+		return EFI_UNSUPPORTED;
+
+	return fops->query_variable_store(attributes, size, false);
+}
+
+static efi_status_t
+check_var_size_nonblocking(u32 attributes, unsigned long size)
+{
+	const struct efivar_operations *fops;
+
+	if (!__efivars)
+		return EFI_UNSUPPORTED;
+
+	fops = __efivars->ops;
+
+	if (!fops->query_variable_store)
+		return EFI_UNSUPPORTED;
+
+	return fops->query_variable_store(attributes, size, true);
+}
+
+static bool variable_is_present(efi_char16_t *variable_name, efi_guid_t *vendor,
+				struct list_head *head)
+{
+	struct efivar_entry *entry, *n;
+	unsigned long strsize1, strsize2;
+	bool found = false;
+
+	strsize1 = ucs2_strsize(variable_name, 1024);
+	list_for_each_entry_safe(entry, n, head, list) {
+		strsize2 = ucs2_strsize(entry->var.VariableName, 1024);
+		if (strsize1 == strsize2 &&
+			!memcmp(variable_name, &(entry->var.VariableName),
+				strsize2) &&
+			!efi_guidcmp(entry->var.VendorGuid,
+				*vendor)) {
+			found = true;
+			break;
+		}
+	}
+	return found;
+}
+
+/*
+ * Returns the size of variable_name, in bytes, including the
+ * terminating NULL character, or variable_name_size if no NULL
+ * character is found among the first variable_name_size bytes.
+ */
+static unsigned long var_name_strnsize(efi_char16_t *variable_name,
+				       unsigned long variable_name_size)
+{
+	unsigned long len;
+	efi_char16_t c;
+
+	/*
+	 * The variable name is, by definition, a NULL-terminated
+	 * string, so make absolutely sure that variable_name_size is
+	 * the value we expect it to be. If not, return the real size.
+	 */
+	for (len = 2; len <= variable_name_size; len += sizeof(c)) {
+		c = variable_name[(len / sizeof(c)) - 1];
+		if (!c)
+			break;
+	}
+
+	return min(len, variable_name_size);
+}
+
+/*
+ * Print a warning when duplicate EFI variables are encountered and
+ * disable the sysfs workqueue since the firmware is buggy.
+ */
+static void dup_variable_bug(efi_char16_t *str16, efi_guid_t *vendor_guid,
+			     unsigned long len16)
+{
+	size_t i, len8 = len16 / sizeof(efi_char16_t);
+	char *str8;
+
+	str8 = kzalloc(len8, GFP_KERNEL);
+	if (!str8)
+		return;
+
+	for (i = 0; i < len8; i++)
+		str8[i] = str16[i];
+
+	printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
+	       str8, vendor_guid);
+	kfree(str8);
+}
+
+/**
+ * efivar_init - build the initial list of EFI variables
+ * @func: callback function to invoke for every variable
+ * @data: function-specific data to pass to @func
+ * @duplicates: error if we encounter duplicates on @head?
+ * @head: initialised head of variable list
+ *
+ * Get every EFI variable from the firmware and invoke @func. @func
+ * should call efivar_entry_add() to build the list of variables.
+ *
+ * Returns 0 on success, or a kernel error code on failure.
+ */
+int efivar_init(int (*func)(efi_char16_t *, efi_guid_t, unsigned long, void *),
+		void *data, bool duplicates, struct list_head *head)
+{
+	const struct efivar_operations *ops;
+	unsigned long variable_name_size = 1024;
+	efi_char16_t *variable_name;
+	efi_status_t status;
+	efi_guid_t vendor_guid;
+	int err = 0;
+
+	if (!__efivars)
+		return -EFAULT;
+
+	ops = __efivars->ops;
+
+	variable_name = kzalloc(variable_name_size, GFP_KERNEL);
+	if (!variable_name) {
+		printk(KERN_ERR "efivars: Memory allocation failed.\n");
+		return -ENOMEM;
+	}
+
+	if (down_interruptible(&efivars_lock)) {
+		err = -EINTR;
+		goto free;
+	}
+
+	/*
+	 * Per EFI spec, the maximum storage allocated for both
+	 * the variable name and variable data is 1024 bytes.
+	 */
+
+	do {
+		variable_name_size = 1024;
+
+		status = ops->get_next_variable(&variable_name_size,
+						variable_name,
+						&vendor_guid);
+		switch (status) {
+		case EFI_SUCCESS:
+			if (duplicates)
+				up(&efivars_lock);
+
+			variable_name_size = var_name_strnsize(variable_name,
+							       variable_name_size);
+
+			/*
+			 * Some firmware implementations return the
+			 * same variable name on multiple calls to
+			 * get_next_variable(). Terminate the loop
+			 * immediately as there is no guarantee that
+			 * we'll ever see a different variable name,
+			 * and may end up looping here forever.
+			 */
+			if (duplicates &&
+			    variable_is_present(variable_name, &vendor_guid,
+						head)) {
+				dup_variable_bug(variable_name, &vendor_guid,
+						 variable_name_size);
+				status = EFI_NOT_FOUND;
+			} else {
+				err = func(variable_name, vendor_guid,
+					   variable_name_size, data);
+				if (err)
+					status = EFI_NOT_FOUND;
+			}
+
+			if (duplicates) {
+				if (down_interruptible(&efivars_lock)) {
+					err = -EINTR;
+					goto free;
+				}
+			}
+
+			break;
+		case EFI_UNSUPPORTED:
+			err = -EOPNOTSUPP;
+			status = EFI_NOT_FOUND;
+			break;
+		case EFI_NOT_FOUND:
+			break;
+		default:
+			printk(KERN_WARNING "efivars: get_next_variable: status=%lx\n",
+				status);
+			status = EFI_NOT_FOUND;
+			break;
+		}
+
+	} while (status != EFI_NOT_FOUND);
+
+	up(&efivars_lock);
+free:
+	kfree(variable_name);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(efivar_init);
+
+/**
+ * efivar_entry_add - add entry to variable list
+ * @entry: entry to add to list
+ * @head: list head
+ *
+ * Returns 0 on success, or a kernel error code on failure.
+ */
+int efivar_entry_add(struct efivar_entry *entry, struct list_head *head)
+{
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+	list_add(&entry->list, head);
+	up(&efivars_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_add);
+
+/**
+ * efivar_entry_remove - remove entry from variable list
+ * @entry: entry to remove from list
+ *
+ * Returns 0 on success, or a kernel error code on failure.
+ */
+int efivar_entry_remove(struct efivar_entry *entry)
+{
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+	list_del(&entry->list);
+	up(&efivars_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_remove);
+
+/*
+ * efivar_entry_list_del_unlock - remove entry from variable list
+ * @entry: entry to remove
+ *
+ * Remove @entry from the variable list and release the list lock.
+ *
+ * NOTE: slightly weird locking semantics here - we expect to be
+ * called with the efivars lock already held, and we release it before
+ * returning. This is because this function is usually called after
+ * set_variable() while the lock is still held.
+ */
+static void efivar_entry_list_del_unlock(struct efivar_entry *entry)
+{
+	list_del(&entry->list);
+	up(&efivars_lock);
+}
+
+/**
+ * __efivar_entry_delete - delete an EFI variable
+ * @entry: entry containing EFI variable to delete
+ *
+ * Delete the variable from the firmware but leave @entry on the
+ * variable list.
+ *
+ * This function differs from efivar_entry_delete() because it does
+ * not remove @entry from the variable list. Also, it is safe to be
+ * called from within a efivar_entry_iter_begin() and
+ * efivar_entry_iter_end() region, unlike efivar_entry_delete().
+ *
+ * Returns 0 on success, or a converted EFI status code if
+ * set_variable() fails.
+ */
+int __efivar_entry_delete(struct efivar_entry *entry)
+{
+	efi_status_t status;
+
+	if (!__efivars)
+		return -EINVAL;
+
+	status = __efivars->ops->set_variable(entry->var.VariableName,
+					      &entry->var.VendorGuid,
+					      0, 0, NULL);
+
+	return efi_status_to_err(status);
+}
+EXPORT_SYMBOL_GPL(__efivar_entry_delete);
+
+/**
+ * efivar_entry_delete - delete variable and remove entry from list
+ * @entry: entry containing variable to delete
+ *
+ * Delete the variable from the firmware and remove @entry from the
+ * variable list. It is the caller's responsibility to free @entry
+ * once we return.
+ *
+ * Returns 0 on success, -EINTR if we can't grab the semaphore,
+ * converted EFI status code if set_variable() fails.
+ */
+int efivar_entry_delete(struct efivar_entry *entry)
+{
+	const struct efivar_operations *ops;
+	efi_status_t status;
+
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	if (!__efivars) {
+		up(&efivars_lock);
+		return -EINVAL;
+	}
+	ops = __efivars->ops;
+	status = ops->set_variable(entry->var.VariableName,
+				   &entry->var.VendorGuid,
+				   0, 0, NULL);
+	if (!(status == EFI_SUCCESS || status == EFI_NOT_FOUND)) {
+		up(&efivars_lock);
+		return efi_status_to_err(status);
+	}
+
+	efivar_entry_list_del_unlock(entry);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_delete);
+
+/**
+ * efivar_entry_set - call set_variable()
+ * @entry: entry containing the EFI variable to write
+ * @attributes: variable attributes
+ * @size: size of @data buffer
+ * @data: buffer containing variable data
+ * @head: head of variable list
+ *
+ * Calls set_variable() for an EFI variable. If creating a new EFI
+ * variable, this function is usually followed by efivar_entry_add().
+ *
+ * Before writing the variable, the remaining EFI variable storage
+ * space is checked to ensure there is enough room available.
+ *
+ * If @head is not NULL a lookup is performed to determine whether
+ * the entry is already on the list.
+ *
+ * Returns 0 on success, -EINTR if we can't grab the semaphore,
+ * -EEXIST if a lookup is performed and the entry already exists on
+ * the list, or a converted EFI status code if set_variable() fails.
+ */
+int efivar_entry_set(struct efivar_entry *entry, u32 attributes,
+		     unsigned long size, void *data, struct list_head *head)
+{
+	const struct efivar_operations *ops;
+	efi_status_t status;
+	efi_char16_t *name = entry->var.VariableName;
+	efi_guid_t vendor = entry->var.VendorGuid;
+
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	if (!__efivars) {
+		up(&efivars_lock);
+		return -EINVAL;
+	}
+	ops = __efivars->ops;
+	if (head && efivar_entry_find(name, vendor, head, false)) {
+		up(&efivars_lock);
+		return -EEXIST;
+	}
+
+	status = check_var_size(attributes, size + ucs2_strsize(name, 1024));
+	if (status == EFI_SUCCESS || status == EFI_UNSUPPORTED)
+		status = ops->set_variable(name, &vendor,
+					   attributes, size, data);
+
+	up(&efivars_lock);
+
+	return efi_status_to_err(status);
+
+}
+EXPORT_SYMBOL_GPL(efivar_entry_set);
+
+/*
+ * efivar_entry_set_nonblocking - call set_variable_nonblocking()
+ *
+ * This function is guaranteed to not block and is suitable for calling
+ * from crash/panic handlers.
+ *
+ * Crucially, this function will not block if it cannot acquire
+ * efivars_lock. Instead, it returns -EBUSY.
+ */
+static int
+efivar_entry_set_nonblocking(efi_char16_t *name, efi_guid_t vendor,
+			     u32 attributes, unsigned long size, void *data)
+{
+	const struct efivar_operations *ops;
+	efi_status_t status;
+
+	if (down_trylock(&efivars_lock))
+		return -EBUSY;
+
+	if (!__efivars) {
+		up(&efivars_lock);
+		return -EINVAL;
+	}
+
+	status = check_var_size_nonblocking(attributes,
+					    size + ucs2_strsize(name, 1024));
+	if (status != EFI_SUCCESS) {
+		up(&efivars_lock);
+		return -ENOSPC;
+	}
+
+	ops = __efivars->ops;
+	status = ops->set_variable_nonblocking(name, &vendor, attributes,
+					       size, data);
+
+	up(&efivars_lock);
+	return efi_status_to_err(status);
+}
+
+/**
+ * efivar_entry_set_safe - call set_variable() if enough space in firmware
+ * @name: buffer containing the variable name
+ * @vendor: variable vendor guid
+ * @attributes: variable attributes
+ * @block: can we block in this context?
+ * @size: size of @data buffer
+ * @data: buffer containing variable data
+ *
+ * Ensures there is enough free storage in the firmware for this variable, and
+ * if so, calls set_variable(). If creating a new EFI variable, this function
+ * is usually followed by efivar_entry_add().
+ *
+ * Returns 0 on success, -ENOSPC if the firmware does not have enough
+ * space for set_variable() to succeed, or a converted EFI status code
+ * if set_variable() fails.
+ */
+int efivar_entry_set_safe(efi_char16_t *name, efi_guid_t vendor, u32 attributes,
+			  bool block, unsigned long size, void *data)
+{
+	const struct efivar_operations *ops;
+	efi_status_t status;
+	unsigned long varsize;
+
+	if (!__efivars)
+		return -EINVAL;
+
+	ops = __efivars->ops;
+	if (!ops->query_variable_store)
+		return -ENOSYS;
+
+	/*
+	 * If the EFI variable backend provides a non-blocking
+	 * ->set_variable() operation and we're in a context where we
+	 * cannot block, then we need to use it to avoid live-locks,
+	 * since the implication is that the regular ->set_variable()
+	 * will block.
+	 *
+	 * If no ->set_variable_nonblocking() is provided then
+	 * ->set_variable() is assumed to be non-blocking.
+	 */
+	if (!block && ops->set_variable_nonblocking)
+		return efivar_entry_set_nonblocking(name, vendor, attributes,
+						    size, data);
+
+	varsize = size + ucs2_strsize(name, 1024);
+	if (!block) {
+		if (down_trylock(&efivars_lock))
+			return -EBUSY;
+		status = check_var_size_nonblocking(attributes, varsize);
+	} else {
+		if (down_interruptible(&efivars_lock))
+			return -EINTR;
+		status = check_var_size(attributes, varsize);
+	}
+
+	if (status != EFI_SUCCESS) {
+		up(&efivars_lock);
+		return -ENOSPC;
+	}
+
+	status = ops->set_variable(name, &vendor, attributes, size, data);
+
+	up(&efivars_lock);
+
+	return efi_status_to_err(status);
+}
+EXPORT_SYMBOL_GPL(efivar_entry_set_safe);
+
+/**
+ * efivar_entry_find - search for an entry
+ * @name: the EFI variable name
+ * @guid: the EFI variable vendor's guid
+ * @head: head of the variable list
+ * @remove: should we remove the entry from the list?
+ *
+ * Search for an entry on the variable list that has the EFI variable
+ * name @name and vendor guid @guid. If an entry is found on the list
+ * and @remove is true, the entry is removed from the list.
+ *
+ * The caller MUST call efivar_entry_iter_begin() and
+ * efivar_entry_iter_end() before and after the invocation of this
+ * function, respectively.
+ *
+ * Returns the entry if found on the list, %NULL otherwise.
+ */
+struct efivar_entry *efivar_entry_find(efi_char16_t *name, efi_guid_t guid,
+				       struct list_head *head, bool remove)
+{
+	struct efivar_entry *entry, *n;
+	int strsize1, strsize2;
+	bool found = false;
+
+	list_for_each_entry_safe(entry, n, head, list) {
+		strsize1 = ucs2_strsize(name, 1024);
+		strsize2 = ucs2_strsize(entry->var.VariableName, 1024);
+		if (strsize1 == strsize2 &&
+		    !memcmp(name, &(entry->var.VariableName), strsize1) &&
+		    !efi_guidcmp(guid, entry->var.VendorGuid)) {
+			found = true;
+			break;
+		}
+	}
+
+	if (!found)
+		return NULL;
+
+	if (remove) {
+		if (entry->scanning) {
+			/*
+			 * The entry will be deleted
+			 * after scanning is completed.
+			 */
+			entry->deleting = true;
+		} else
+			list_del(&entry->list);
+	}
+
+	return entry;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_find);
+
+/**
+ * efivar_entry_size - obtain the size of a variable
+ * @entry: entry for this variable
+ * @size: location to store the variable's size
+ */
+int efivar_entry_size(struct efivar_entry *entry, unsigned long *size)
+{
+	const struct efivar_operations *ops;
+	efi_status_t status;
+
+	*size = 0;
+
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+	if (!__efivars) {
+		up(&efivars_lock);
+		return -EINVAL;
+	}
+	ops = __efivars->ops;
+	status = ops->get_variable(entry->var.VariableName,
+				   &entry->var.VendorGuid, NULL, size, NULL);
+	up(&efivars_lock);
+
+	if (status != EFI_BUFFER_TOO_SMALL)
+		return efi_status_to_err(status);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_size);
+
+/**
+ * __efivar_entry_get - call get_variable()
+ * @entry: read data for this variable
+ * @attributes: variable attributes
+ * @size: size of @data buffer
+ * @data: buffer to store variable data
+ *
+ * The caller MUST call efivar_entry_iter_begin() and
+ * efivar_entry_iter_end() before and after the invocation of this
+ * function, respectively.
+ */
+int __efivar_entry_get(struct efivar_entry *entry, u32 *attributes,
+		       unsigned long *size, void *data)
+{
+	efi_status_t status;
+
+	if (!__efivars)
+		return -EINVAL;
+
+	status = __efivars->ops->get_variable(entry->var.VariableName,
+					      &entry->var.VendorGuid,
+					      attributes, size, data);
+
+	return efi_status_to_err(status);
+}
+EXPORT_SYMBOL_GPL(__efivar_entry_get);
+
+/**
+ * efivar_entry_get - call get_variable()
+ * @entry: read data for this variable
+ * @attributes: variable attributes
+ * @size: size of @data buffer
+ * @data: buffer to store variable data
+ */
+int efivar_entry_get(struct efivar_entry *entry, u32 *attributes,
+		     unsigned long *size, void *data)
+{
+	efi_status_t status;
+
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	if (!__efivars) {
+		up(&efivars_lock);
+		return -EINVAL;
+	}
+
+	status = __efivars->ops->get_variable(entry->var.VariableName,
+					      &entry->var.VendorGuid,
+					      attributes, size, data);
+	up(&efivars_lock);
+
+	return efi_status_to_err(status);
+}
+EXPORT_SYMBOL_GPL(efivar_entry_get);
+
+/**
+ * efivar_entry_set_get_size - call set_variable() and get new size (atomic)
+ * @entry: entry containing variable to set and get
+ * @attributes: attributes of variable to be written
+ * @size: size of data buffer
+ * @data: buffer containing data to write
+ * @set: did the set_variable() call succeed?
+ *
+ * This is a pretty special (complex) function. See efivarfs_file_write().
+ *
+ * Atomically call set_variable() for @entry and if the call is
+ * successful, return the new size of the variable from get_variable()
+ * in @size. The success of set_variable() is indicated by @set.
+ *
+ * Returns 0 on success, -EINVAL if the variable data is invalid,
+ * -ENOSPC if the firmware does not have enough available space, or a
+ * converted EFI status code if either of set_variable() or
+ * get_variable() fail.
+ *
+ * If the EFI variable does not exist when calling set_variable()
+ * (EFI_NOT_FOUND), @entry is removed from the variable list.
+ */
+int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes,
+			      unsigned long *size, void *data, bool *set)
+{
+	const struct efivar_operations *ops;
+	efi_char16_t *name = entry->var.VariableName;
+	efi_guid_t *vendor = &entry->var.VendorGuid;
+	efi_status_t status;
+	int err;
+
+	*set = false;
+
+	if (efivar_validate(*vendor, name, data, *size) == false)
+		return -EINVAL;
+
+	/*
+	 * The lock here protects the get_variable call, the conditional
+	 * set_variable call, and removal of the variable from the efivars
+	 * list (in the case of an authenticated delete).
+	 */
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	if (!__efivars) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/*
+	 * Ensure that the available space hasn't shrunk below the safe level
+	 */
+	status = check_var_size(attributes, *size + ucs2_strsize(name, 1024));
+	if (status != EFI_SUCCESS) {
+		if (status != EFI_UNSUPPORTED) {
+			err = efi_status_to_err(status);
+			goto out;
+		}
+
+		if (*size > 65536) {
+			err = -ENOSPC;
+			goto out;
+		}
+	}
+
+	ops = __efivars->ops;
+
+	status = ops->set_variable(name, vendor, attributes, *size, data);
+	if (status != EFI_SUCCESS) {
+		err = efi_status_to_err(status);
+		goto out;
+	}
+
+	*set = true;
+
+	/*
+	 * Writing to the variable may have caused a change in size (which
+	 * could either be an append or an overwrite), or the variable to be
+	 * deleted. Perform a GetVariable() so we can tell what actually
+	 * happened.
+	 */
+	*size = 0;
+	status = ops->get_variable(entry->var.VariableName,
+				   &entry->var.VendorGuid,
+				   NULL, size, NULL);
+
+	if (status == EFI_NOT_FOUND)
+		efivar_entry_list_del_unlock(entry);
+	else
+		up(&efivars_lock);
+
+	if (status && status != EFI_BUFFER_TOO_SMALL)
+		return efi_status_to_err(status);
+
+	return 0;
+
+out:
+	up(&efivars_lock);
+	return err;
+
+}
+EXPORT_SYMBOL_GPL(efivar_entry_set_get_size);
+
+/**
+ * efivar_entry_iter_begin - begin iterating the variable list
+ *
+ * Lock the variable list to prevent entry insertion and removal until
+ * efivar_entry_iter_end() is called. This function is usually used in
+ * conjunction with __efivar_entry_iter() or efivar_entry_iter().
+ */
+int efivar_entry_iter_begin(void)
+{
+	return down_interruptible(&efivars_lock);
+}
+EXPORT_SYMBOL_GPL(efivar_entry_iter_begin);
+
+/**
+ * efivar_entry_iter_end - finish iterating the variable list
+ *
+ * Unlock the variable list and allow modifications to the list again.
+ */
+void efivar_entry_iter_end(void)
+{
+	up(&efivars_lock);
+}
+EXPORT_SYMBOL_GPL(efivar_entry_iter_end);
+
+/**
+ * __efivar_entry_iter - iterate over variable list
+ * @func: callback function
+ * @head: head of the variable list
+ * @data: function-specific data to pass to callback
+ * @prev: entry to begin iterating from
+ *
+ * Iterate over the list of EFI variables and call @func with every
+ * entry on the list. It is safe for @func to remove entries in the
+ * list via efivar_entry_delete().
+ *
+ * You MUST call efivar_entry_iter_begin() before this function, and
+ * efivar_entry_iter_end() afterwards.
+ *
+ * It is possible to begin iteration from an arbitrary entry within
+ * the list by passing @prev. @prev is updated on return to point to
+ * the last entry passed to @func. To begin iterating from the
+ * beginning of the list @prev must be %NULL.
+ *
+ * The restrictions for @func are the same as documented for
+ * efivar_entry_iter().
+ */
+int __efivar_entry_iter(int (*func)(struct efivar_entry *, void *),
+			struct list_head *head, void *data,
+			struct efivar_entry **prev)
+{
+	struct efivar_entry *entry, *n;
+	int err = 0;
+
+	if (!prev || !*prev) {
+		list_for_each_entry_safe(entry, n, head, list) {
+			err = func(entry, data);
+			if (err)
+				break;
+		}
+
+		if (prev)
+			*prev = entry;
+
+		return err;
+	}
+
+
+	list_for_each_entry_safe_continue((*prev), n, head, list) {
+		err = func(*prev, data);
+		if (err)
+			break;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(__efivar_entry_iter);
+
+/**
+ * efivar_entry_iter - iterate over variable list
+ * @func: callback function
+ * @head: head of variable list
+ * @data: function-specific data to pass to callback
+ *
+ * Iterate over the list of EFI variables and call @func with every
+ * entry on the list. It is safe for @func to remove entries in the
+ * list via efivar_entry_delete() while iterating.
+ *
+ * Some notes for the callback function:
+ *  - a non-zero return value indicates an error and terminates the loop
+ *  - @func is called from atomic context
+ */
+int efivar_entry_iter(int (*func)(struct efivar_entry *, void *),
+		      struct list_head *head, void *data)
+{
+	int err = 0;
+
+	err = efivar_entry_iter_begin();
+	if (err)
+		return err;
+	err = __efivar_entry_iter(func, head, data, NULL);
+	efivar_entry_iter_end();
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(efivar_entry_iter);
+
+/**
+ * efivars_kobject - get the kobject for the registered efivars
+ *
+ * If efivars_register() has not been called we return NULL,
+ * otherwise return the kobject used at registration time.
+ */
+struct kobject *efivars_kobject(void)
+{
+	if (!__efivars)
+		return NULL;
+
+	return __efivars->kobject;
+}
+EXPORT_SYMBOL_GPL(efivars_kobject);
+
+/**
+ * efivars_register - register an efivars
+ * @efivars: efivars to register
+ * @ops: efivars operations
+ * @kobject: @efivars-specific kobject
+ *
+ * Only a single efivars can be registered at any time.
+ */
+int efivars_register(struct efivars *efivars,
+		     const struct efivar_operations *ops,
+		     struct kobject *kobject)
+{
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	efivars->ops = ops;
+	efivars->kobject = kobject;
+
+	__efivars = efivars;
+
+	pr_info("Registered efivars operations\n");
+
+	up(&efivars_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(efivars_register);
+
+/**
+ * efivars_unregister - unregister an efivars
+ * @efivars: efivars to unregister
+ *
+ * The caller must have already removed every entry from the list,
+ * failure to do so is an error.
+ */
+int efivars_unregister(struct efivars *efivars)
+{
+	int rv;
+
+	if (down_interruptible(&efivars_lock))
+		return -EINTR;
+
+	if (!__efivars) {
+		printk(KERN_ERR "efivars not registered\n");
+		rv = -EINVAL;
+		goto out;
+	}
+
+	if (__efivars != efivars) {
+		rv = -EINVAL;
+		goto out;
+	}
+
+	pr_info("Unregistered efivars operations\n");
+	__efivars = NULL;
+
+	rv = 0;
+out:
+	up(&efivars_lock);
+	return rv;
+}
+EXPORT_SYMBOL_GPL(efivars_unregister);
+
+int efivar_supports_writes(void)
+{
+	return __efivars && __efivars->ops->set_variable;
+}
+EXPORT_SYMBOL_GPL(efivar_supports_writes);
diff --git a/drivers/firmware/efi/x86_fake_mem.c b/drivers/firmware/efi/x86_fake_mem.c
new file mode 100644
index 000000000..0bafcc1bb
--- /dev/null
+++ b/drivers/firmware/efi/x86_fake_mem.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2019 Intel Corporation. All rights reserved. */
+#include <linux/efi.h>
+#include <asm/e820/api.h>
+#include "fake_mem.h"
+
+void __init efi_fake_memmap_early(void)
+{
+	int i;
+
+	/*
+	 * The late efi_fake_mem() call can handle all requests if
+	 * EFI_MEMORY_SP support is disabled.
+	 */
+	if (!efi_soft_reserve_enabled())
+		return;
+
+	if (!efi_enabled(EFI_MEMMAP) || !nr_fake_mem)
+		return;
+
+	/*
+	 * Given that efi_fake_memmap() needs to perform memblock
+	 * allocations it needs to run after e820__memblock_setup().
+	 * However, if efi_fake_mem specifies EFI_MEMORY_SP for a given
+	 * address range that potentially needs to mark the memory as
+	 * reserved prior to e820__memblock_setup(). Update e820
+	 * directly if EFI_MEMORY_SP is specified for an
+	 * EFI_CONVENTIONAL_MEMORY descriptor.
+	 */
+	for (i = 0; i < nr_fake_mem; i++) {
+		struct efi_mem_range *mem = &efi_fake_mems[i];
+		efi_memory_desc_t *md;
+		u64 m_start, m_end;
+
+		if ((mem->attribute & EFI_MEMORY_SP) == 0)
+			continue;
+
+		m_start = mem->range.start;
+		m_end = mem->range.end;
+		for_each_efi_memory_desc(md) {
+			u64 start, end, size;
+
+			if (md->type != EFI_CONVENTIONAL_MEMORY)
+				continue;
+
+			start = md->phys_addr;
+			end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+
+			if (m_start <= end && m_end >= start)
+				/* fake range overlaps descriptor */;
+			else
+				continue;
+
+			/*
+			 * Trim the boundary of the e820 update to the
+			 * descriptor in case the fake range overlaps
+			 * !EFI_CONVENTIONAL_MEMORY
+			 */
+			start = max(start, m_start);
+			end = min(end, m_end);
+			size = end - start + 1;
+
+			if (end <= start)
+				continue;
+
+			/*
+			 * Ensure each efi_fake_mem instance results in
+			 * a unique e820 resource
+			 */
+			e820__range_remove(start, size, E820_TYPE_RAM, 1);
+			e820__range_add(start, size, E820_TYPE_SOFT_RESERVED);
+			e820__update_table(e820_table);
+		}
+	}
+}
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
new file mode 100644
index 000000000..983e07dc0
--- /dev/null
+++ b/drivers/firmware/google/Kconfig
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig GOOGLE_FIRMWARE
+	bool "Google Firmware Drivers"
+	default n
+	help
+	  These firmware drivers are used by Google servers,
+	  Chromebooks and other devices using coreboot firmware.
+	  If in doubt, say "N".
+
+if GOOGLE_FIRMWARE
+
+config GOOGLE_SMI
+	tristate "SMI interface for Google platforms"
+	depends on X86 && ACPI && DMI
+	help
+	  Say Y here if you want to enable SMI callbacks for Google
+	  platforms.  This provides an interface for writing to and
+	  clearing the event log.  If CONFIG_EFI is also enabled this
+	  driver provides an interface for reading and writing NVRAM
+	  variables.
+
+config GOOGLE_COREBOOT_TABLE
+	tristate "Coreboot Table Access"
+	depends on HAS_IOMEM && (ACPI || OF)
+	help
+	  This option enables the coreboot_table module, which provides other
+	  firmware modules access to the coreboot table. The coreboot table
+	  pointer is accessed through the ACPI "GOOGCB00" object or the
+	  device tree node /firmware/coreboot.
+	  If unsure say N.
+
+config GOOGLE_COREBOOT_TABLE_ACPI
+	tristate
+	select GOOGLE_COREBOOT_TABLE
+
+config GOOGLE_COREBOOT_TABLE_OF
+	tristate
+	select GOOGLE_COREBOOT_TABLE
+
+config GOOGLE_MEMCONSOLE
+	tristate
+	depends on GOOGLE_MEMCONSOLE_X86_LEGACY || GOOGLE_MEMCONSOLE_COREBOOT
+
+config GOOGLE_MEMCONSOLE_X86_LEGACY
+	tristate "Firmware Memory Console - X86 Legacy support"
+	depends on X86 && ACPI && DMI
+	select GOOGLE_MEMCONSOLE
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the EBDA on Google servers.  If found, this log is exported to
+	  userland in the file /sys/firmware/log.
+
+config GOOGLE_FRAMEBUFFER_COREBOOT
+	tristate "Coreboot Framebuffer"
+	depends on FB_SIMPLE
+	depends on GOOGLE_COREBOOT_TABLE
+	help
+	  This option enables the kernel to search for a framebuffer in
+	  the coreboot table.  If found, it is registered with simplefb.
+
+config GOOGLE_MEMCONSOLE_COREBOOT
+	tristate "Firmware Memory Console"
+	depends on GOOGLE_COREBOOT_TABLE
+	select GOOGLE_MEMCONSOLE
+	help
+	  This option enables the kernel to search for a firmware log in
+	  the coreboot table.  If found, this log is exported to userland
+	  in the file /sys/firmware/log.
+
+config GOOGLE_VPD
+	tristate "Vital Product Data"
+	depends on GOOGLE_COREBOOT_TABLE
+	help
+	  This option enables the kernel to expose the content of Google VPD
+	  under /sys/firmware/vpd.
+
+endif # GOOGLE_FIRMWARE
diff --git a/drivers/firmware/google/Makefile b/drivers/firmware/google/Makefile
new file mode 100644
index 000000000..d17caded5
--- /dev/null
+++ b/drivers/firmware/google/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_GOOGLE_SMI)		+= gsmi.o
+obj-$(CONFIG_GOOGLE_COREBOOT_TABLE)        += coreboot_table.o
+obj-$(CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT)  += framebuffer-coreboot.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE)            += memconsole.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE_COREBOOT)   += memconsole-coreboot.o
+obj-$(CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY) += memconsole-x86-legacy.o
+
+vpd-sysfs-y := vpd.o vpd_decode.o
+obj-$(CONFIG_GOOGLE_VPD)		+= vpd-sysfs.o
diff --git a/drivers/firmware/google/coreboot_table.c b/drivers/firmware/google/coreboot_table.c
new file mode 100644
index 000000000..568074148
--- /dev/null
+++ b/drivers/firmware/google/coreboot_table.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * coreboot_table.c
+ *
+ * Module providing coreboot table access.
+ *
+ * Copyright 2017 Google Inc.
+ * Copyright 2017 Samuel Holland <samuel@sholland.org>
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "coreboot_table.h"
+
+#define CB_DEV(d) container_of(d, struct coreboot_device, dev)
+#define CB_DRV(d) container_of(d, struct coreboot_driver, drv)
+
+static int coreboot_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct coreboot_device *device = CB_DEV(dev);
+	struct coreboot_driver *driver = CB_DRV(drv);
+
+	return device->entry.tag == driver->tag;
+}
+
+static int coreboot_bus_probe(struct device *dev)
+{
+	int ret = -ENODEV;
+	struct coreboot_device *device = CB_DEV(dev);
+	struct coreboot_driver *driver = CB_DRV(dev->driver);
+
+	if (driver->probe)
+		ret = driver->probe(device);
+
+	return ret;
+}
+
+static int coreboot_bus_remove(struct device *dev)
+{
+	int ret = 0;
+	struct coreboot_device *device = CB_DEV(dev);
+	struct coreboot_driver *driver = CB_DRV(dev->driver);
+
+	if (driver->remove)
+		ret = driver->remove(device);
+
+	return ret;
+}
+
+static struct bus_type coreboot_bus_type = {
+	.name		= "coreboot",
+	.match		= coreboot_bus_match,
+	.probe		= coreboot_bus_probe,
+	.remove		= coreboot_bus_remove,
+};
+
+static void coreboot_device_release(struct device *dev)
+{
+	struct coreboot_device *device = CB_DEV(dev);
+
+	kfree(device);
+}
+
+int coreboot_driver_register(struct coreboot_driver *driver)
+{
+	driver->drv.bus = &coreboot_bus_type;
+
+	return driver_register(&driver->drv);
+}
+EXPORT_SYMBOL(coreboot_driver_register);
+
+void coreboot_driver_unregister(struct coreboot_driver *driver)
+{
+	driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(coreboot_driver_unregister);
+
+static int coreboot_table_populate(struct device *dev, void *ptr)
+{
+	int i, ret;
+	void *ptr_entry;
+	struct coreboot_device *device;
+	struct coreboot_table_entry *entry;
+	struct coreboot_table_header *header = ptr;
+
+	ptr_entry = ptr + header->header_bytes;
+	for (i = 0; i < header->table_entries; i++) {
+		entry = ptr_entry;
+
+		device = kzalloc(sizeof(struct device) + entry->size, GFP_KERNEL);
+		if (!device)
+			return -ENOMEM;
+
+		dev_set_name(&device->dev, "coreboot%d", i);
+		device->dev.parent = dev;
+		device->dev.bus = &coreboot_bus_type;
+		device->dev.release = coreboot_device_release;
+		memcpy(&device->entry, ptr_entry, entry->size);
+
+		ret = device_register(&device->dev);
+		if (ret) {
+			put_device(&device->dev);
+			return ret;
+		}
+
+		ptr_entry += entry->size;
+	}
+
+	return 0;
+}
+
+static int coreboot_table_probe(struct platform_device *pdev)
+{
+	resource_size_t len;
+	struct coreboot_table_header *header;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	void *ptr;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	len = resource_size(res);
+	if (!res->start || !len)
+		return -EINVAL;
+
+	/* Check just the header first to make sure things are sane */
+	header = memremap(res->start, sizeof(*header), MEMREMAP_WB);
+	if (!header)
+		return -ENOMEM;
+
+	len = header->header_bytes + header->table_bytes;
+	ret = strncmp(header->signature, "LBIO", sizeof(header->signature));
+	memunmap(header);
+	if (ret) {
+		dev_warn(dev, "coreboot table missing or corrupt!\n");
+		return -ENODEV;
+	}
+
+	ptr = memremap(res->start, len, MEMREMAP_WB);
+	if (!ptr)
+		return -ENOMEM;
+
+	ret = coreboot_table_populate(dev, ptr);
+
+	memunmap(ptr);
+
+	return ret;
+}
+
+static int __cb_dev_unregister(struct device *dev, void *dummy)
+{
+	device_unregister(dev);
+	return 0;
+}
+
+static int coreboot_table_remove(struct platform_device *pdev)
+{
+	bus_for_each_dev(&coreboot_bus_type, NULL, NULL, __cb_dev_unregister);
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cros_coreboot_acpi_match[] = {
+	{ "GOOGCB00", 0 },
+	{ "BOOT0000", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, cros_coreboot_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id coreboot_of_match[] = {
+	{ .compatible = "coreboot" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, coreboot_of_match);
+#endif
+
+static struct platform_driver coreboot_table_driver = {
+	.probe = coreboot_table_probe,
+	.remove = coreboot_table_remove,
+	.driver = {
+		.name = "coreboot_table",
+		.acpi_match_table = ACPI_PTR(cros_coreboot_acpi_match),
+		.of_match_table = of_match_ptr(coreboot_of_match),
+	},
+};
+
+static int __init coreboot_table_driver_init(void)
+{
+	int ret;
+
+	ret = bus_register(&coreboot_bus_type);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&coreboot_table_driver);
+	if (ret) {
+		bus_unregister(&coreboot_bus_type);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit coreboot_table_driver_exit(void)
+{
+	platform_driver_unregister(&coreboot_table_driver);
+	bus_unregister(&coreboot_bus_type);
+}
+
+module_init(coreboot_table_driver_init);
+module_exit(coreboot_table_driver_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/coreboot_table.h b/drivers/firmware/google/coreboot_table.h
new file mode 100644
index 000000000..7b7b4a6ee
--- /dev/null
+++ b/drivers/firmware/google/coreboot_table.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * coreboot_table.h
+ *
+ * Internal header for coreboot table access.
+ *
+ * Copyright 2014 Gerd Hoffmann <kraxel@redhat.com>
+ * Copyright 2017 Google Inc.
+ * Copyright 2017 Samuel Holland <samuel@sholland.org>
+ */
+
+#ifndef __COREBOOT_TABLE_H
+#define __COREBOOT_TABLE_H
+
+#include <linux/device.h>
+
+/* Coreboot table header structure */
+struct coreboot_table_header {
+	char signature[4];
+	u32 header_bytes;
+	u32 header_checksum;
+	u32 table_bytes;
+	u32 table_checksum;
+	u32 table_entries;
+};
+
+/* List of coreboot entry structures that is used */
+/* Generic */
+struct coreboot_table_entry {
+	u32 tag;
+	u32 size;
+};
+
+/* Points to a CBMEM entry */
+struct lb_cbmem_ref {
+	u32 tag;
+	u32 size;
+
+	u64 cbmem_addr;
+};
+
+/* Describes framebuffer setup by coreboot */
+struct lb_framebuffer {
+	u32 tag;
+	u32 size;
+
+	u64 physical_address;
+	u32 x_resolution;
+	u32 y_resolution;
+	u32 bytes_per_line;
+	u8  bits_per_pixel;
+	u8  red_mask_pos;
+	u8  red_mask_size;
+	u8  green_mask_pos;
+	u8  green_mask_size;
+	u8  blue_mask_pos;
+	u8  blue_mask_size;
+	u8  reserved_mask_pos;
+	u8  reserved_mask_size;
+};
+
+/* A device, additionally with information from coreboot. */
+struct coreboot_device {
+	struct device dev;
+	union {
+		struct coreboot_table_entry entry;
+		struct lb_cbmem_ref cbmem_ref;
+		struct lb_framebuffer framebuffer;
+	};
+};
+
+/* A driver for handling devices described in coreboot tables. */
+struct coreboot_driver {
+	int (*probe)(struct coreboot_device *);
+	int (*remove)(struct coreboot_device *);
+	struct device_driver drv;
+	u32 tag;
+};
+
+/* Register a driver that uses the data from a coreboot table. */
+int coreboot_driver_register(struct coreboot_driver *driver);
+
+/* Unregister a driver that uses the data from a coreboot table. */
+void coreboot_driver_unregister(struct coreboot_driver *driver);
+
+/* module_coreboot_driver() - Helper macro for drivers that don't do
+ * anything special in module init/exit.  This eliminates a lot of
+ * boilerplate.  Each module may only use this macro once, and
+ * calling it replaces module_init() and module_exit()
+ */
+#define module_coreboot_driver(__coreboot_driver) \
+	module_driver(__coreboot_driver, coreboot_driver_register, \
+			coreboot_driver_unregister)
+
+#endif /* __COREBOOT_TABLE_H */
diff --git a/drivers/firmware/google/framebuffer-coreboot.c b/drivers/firmware/google/framebuffer-coreboot.c
new file mode 100644
index 000000000..922c079d1
--- /dev/null
+++ b/drivers/firmware/google/framebuffer-coreboot.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * framebuffer-coreboot.c
+ *
+ * Memory based framebuffer accessed through coreboot table.
+ *
+ * Copyright 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ * Copyright 2017 Google Inc.
+ * Copyright 2017 Samuel Holland <samuel@sholland.org>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+
+#include "coreboot_table.h"
+
+#define CB_TAG_FRAMEBUFFER 0x12
+
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+static int framebuffer_probe(struct coreboot_device *dev)
+{
+	int i;
+	u32 length;
+	struct lb_framebuffer *fb = &dev->framebuffer;
+	struct platform_device *pdev;
+	struct resource res;
+	struct simplefb_platform_data pdata = {
+		.width = fb->x_resolution,
+		.height = fb->y_resolution,
+		.stride = fb->bytes_per_line,
+		.format = NULL,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+		if (fb->bits_per_pixel     == formats[i].bits_per_pixel &&
+		    fb->red_mask_pos       == formats[i].red.offset &&
+		    fb->red_mask_size      == formats[i].red.length &&
+		    fb->green_mask_pos     == formats[i].green.offset &&
+		    fb->green_mask_size    == formats[i].green.length &&
+		    fb->blue_mask_pos      == formats[i].blue.offset &&
+		    fb->blue_mask_size     == formats[i].blue.length)
+			pdata.format = formats[i].name;
+	}
+	if (!pdata.format)
+		return -ENODEV;
+
+	memset(&res, 0, sizeof(res));
+	res.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	res.name = "Coreboot Framebuffer";
+	res.start = fb->physical_address;
+	length = PAGE_ALIGN(fb->y_resolution * fb->bytes_per_line);
+	res.end = res.start + length - 1;
+	if (res.end <= res.start)
+		return -EINVAL;
+
+	pdev = platform_device_register_resndata(&dev->dev,
+						 "simple-framebuffer", 0,
+						 &res, 1, &pdata,
+						 sizeof(pdata));
+	if (IS_ERR(pdev))
+		pr_warn("coreboot: could not register framebuffer\n");
+	else
+		dev_set_drvdata(&dev->dev, pdev);
+
+	return PTR_ERR_OR_ZERO(pdev);
+}
+
+static int framebuffer_remove(struct coreboot_device *dev)
+{
+	struct platform_device *pdev = dev_get_drvdata(&dev->dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static struct coreboot_driver framebuffer_driver = {
+	.probe = framebuffer_probe,
+	.remove = framebuffer_remove,
+	.drv = {
+		.name = "framebuffer",
+	},
+	.tag = CB_TAG_FRAMEBUFFER,
+};
+module_coreboot_driver(framebuffer_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
new file mode 100644
index 000000000..407cac71c
--- /dev/null
+++ b/drivers/firmware/google/gsmi.c
@@ -0,0 +1,1081 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2010 Google Inc. All Rights Reserved.
+ * Author: dlaurie@google.com (Duncan Laurie)
+ *
+ * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
+ *
+ * EFI SMI interface for Google platforms
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/ioctl.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/dmi.h>
+#include <linux/kdebug.h>
+#include <linux/reboot.h>
+#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/ucs2_string.h>
+#include <linux/suspend.h>
+
+#define GSMI_SHUTDOWN_CLEAN	0	/* Clean Shutdown */
+/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
+#define GSMI_SHUTDOWN_NMIWDT	1	/* NMI Watchdog */
+#define GSMI_SHUTDOWN_PANIC	2	/* Panic */
+#define GSMI_SHUTDOWN_OOPS	3	/* Oops */
+#define GSMI_SHUTDOWN_DIE	4	/* Die -- No longer meaningful */
+#define GSMI_SHUTDOWN_MCE	5	/* Machine Check */
+#define GSMI_SHUTDOWN_SOFTWDT	6	/* Software Watchdog */
+#define GSMI_SHUTDOWN_MBE	7	/* Uncorrected ECC */
+#define GSMI_SHUTDOWN_TRIPLE	8	/* Triple Fault */
+
+#define DRIVER_VERSION		"1.0"
+#define GSMI_GUID_SIZE		16
+#define GSMI_BUF_SIZE		1024
+#define GSMI_BUF_ALIGN		sizeof(u64)
+#define GSMI_CALLBACK		0xef
+
+/* SMI return codes */
+#define GSMI_SUCCESS		0x00
+#define GSMI_UNSUPPORTED2	0x03
+#define GSMI_LOG_FULL		0x0b
+#define GSMI_VAR_NOT_FOUND	0x0e
+#define GSMI_HANDSHAKE_SPIN	0x7d
+#define GSMI_HANDSHAKE_CF	0x7e
+#define GSMI_HANDSHAKE_NONE	0x7f
+#define GSMI_INVALID_PARAMETER	0x82
+#define GSMI_UNSUPPORTED	0x83
+#define GSMI_BUFFER_TOO_SMALL	0x85
+#define GSMI_NOT_READY		0x86
+#define GSMI_DEVICE_ERROR	0x87
+#define GSMI_NOT_FOUND		0x8e
+
+#define QUIRKY_BOARD_HASH 0x78a30a50
+
+/* Internally used commands passed to the firmware */
+#define GSMI_CMD_GET_NVRAM_VAR		0x01
+#define GSMI_CMD_GET_NEXT_VAR		0x02
+#define GSMI_CMD_SET_NVRAM_VAR		0x03
+#define GSMI_CMD_SET_EVENT_LOG		0x08
+#define GSMI_CMD_CLEAR_EVENT_LOG	0x09
+#define GSMI_CMD_LOG_S0IX_SUSPEND	0x0a
+#define GSMI_CMD_LOG_S0IX_RESUME	0x0b
+#define GSMI_CMD_CLEAR_CONFIG		0x20
+#define GSMI_CMD_HANDSHAKE_TYPE		0xC1
+#define GSMI_CMD_RESERVED		0xff
+
+/* Magic entry type for kernel events */
+#define GSMI_LOG_ENTRY_TYPE_KERNEL     0xDEAD
+
+/* SMI buffers must be in 32bit physical address space */
+struct gsmi_buf {
+	u8 *start;			/* start of buffer */
+	size_t length;			/* length of buffer */
+	dma_addr_t handle;		/* dma allocation handle */
+	u32 address;			/* physical address of buffer */
+};
+
+static struct gsmi_device {
+	struct platform_device *pdev;	/* platform device */
+	struct gsmi_buf *name_buf;	/* variable name buffer */
+	struct gsmi_buf *data_buf;	/* generic data buffer */
+	struct gsmi_buf *param_buf;	/* parameter buffer */
+	spinlock_t lock;		/* serialize access to SMIs */
+	u16 smi_cmd;			/* SMI command port */
+	int handshake_type;		/* firmware handler interlock type */
+	struct dma_pool *dma_pool;	/* DMA buffer pool */
+} gsmi_dev;
+
+/* Packed structures for communicating with the firmware */
+struct gsmi_nvram_var_param {
+	efi_guid_t	guid;
+	u32		name_ptr;
+	u32		attributes;
+	u32		data_len;
+	u32		data_ptr;
+} __packed;
+
+struct gsmi_get_next_var_param {
+	u8	guid[GSMI_GUID_SIZE];
+	u32	name_ptr;
+	u32	name_len;
+} __packed;
+
+struct gsmi_set_eventlog_param {
+	u32	data_ptr;
+	u32	data_len;
+	u32	type;
+} __packed;
+
+/* Event log formats */
+struct gsmi_log_entry_type_1 {
+	u16	type;
+	u32	instance;
+} __packed;
+
+/*
+ * Some platforms don't have explicit SMI handshake
+ * and need to wait for SMI to complete.
+ */
+#define GSMI_DEFAULT_SPINCOUNT	0x10000
+static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
+module_param(spincount, uint, 0600);
+MODULE_PARM_DESC(spincount,
+	"The number of loop iterations to use when using the spin handshake.");
+
+/*
+ * Platforms might not support S0ix logging in their GSMI handlers. In order to
+ * avoid any side-effects of generating an SMI for S0ix logging, use the S0ix
+ * related GSMI commands only for those platforms that explicitly enable this
+ * option.
+ */
+static bool s0ix_logging_enable;
+module_param(s0ix_logging_enable, bool, 0600);
+
+static struct gsmi_buf *gsmi_buf_alloc(void)
+{
+	struct gsmi_buf *smibuf;
+
+	smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
+	if (!smibuf) {
+		printk(KERN_ERR "gsmi: out of memory\n");
+		return NULL;
+	}
+
+	/* allocate buffer in 32bit address space */
+	smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
+				       &smibuf->handle);
+	if (!smibuf->start) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		kfree(smibuf);
+		return NULL;
+	}
+
+	/* fill in the buffer handle */
+	smibuf->length = GSMI_BUF_SIZE;
+	smibuf->address = (u32)virt_to_phys(smibuf->start);
+
+	return smibuf;
+}
+
+static void gsmi_buf_free(struct gsmi_buf *smibuf)
+{
+	if (smibuf) {
+		if (smibuf->start)
+			dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
+				      smibuf->handle);
+		kfree(smibuf);
+	}
+}
+
+/*
+ * Make a call to gsmi func(sub).  GSMI error codes are translated to
+ * in-kernel errnos (0 on success, -ERRNO on error).
+ */
+static int gsmi_exec(u8 func, u8 sub)
+{
+	u16 cmd = (sub << 8) | func;
+	u16 result = 0;
+	int rc = 0;
+
+	/*
+	 * AH  : Subfunction number
+	 * AL  : Function number
+	 * EBX : Parameter block address
+	 * DX  : SMI command port
+	 *
+	 * Three protocols here. See also the comment in gsmi_init().
+	 */
+	if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
+		/*
+		 * If handshake_type == HANDSHAKE_CF then set CF on the
+		 * way in and wait for the handler to clear it; this avoids
+		 * corrupting register state on those chipsets which have
+		 * a delay between writing the SMI trigger register and
+		 * entering SMM.
+		 */
+		asm volatile (
+			"stc\n"
+			"outb %%al, %%dx\n"
+		"1:      jc 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	} else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
+		/*
+		 * If handshake_type == HANDSHAKE_SPIN we spin a
+		 * hundred-ish usecs to ensure the SMI has triggered.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n"
+		"1:      loop 1b\n"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address),
+			  "c" (spincount)
+			: "memory", "cc"
+		);
+	} else {
+		/*
+		 * If handshake_type == HANDSHAKE_NONE we do nothing;
+		 * either we don't need to or it's legacy firmware that
+		 * doesn't understand the CF protocol.
+		 */
+		asm volatile (
+			"outb %%al, %%dx\n\t"
+			: "=a" (result)
+			: "0" (cmd),
+			  "d" (gsmi_dev.smi_cmd),
+			  "b" (gsmi_dev.param_buf->address)
+			: "memory", "cc"
+		);
+	}
+
+	/* check return code from SMI handler */
+	switch (result) {
+	case GSMI_SUCCESS:
+		break;
+	case GSMI_VAR_NOT_FOUND:
+		/* not really an error, but let the caller know */
+		rc = 1;
+		break;
+	case GSMI_INVALID_PARAMETER:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
+		rc = -EINVAL;
+		break;
+	case GSMI_BUFFER_TOO_SMALL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
+		rc = -ENOMEM;
+		break;
+	case GSMI_UNSUPPORTED:
+	case GSMI_UNSUPPORTED2:
+		if (sub != GSMI_CMD_HANDSHAKE_TYPE)
+			printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
+			       cmd);
+		rc = -ENOSYS;
+		break;
+	case GSMI_NOT_READY:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
+		rc = -EBUSY;
+		break;
+	case GSMI_DEVICE_ERROR:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
+		rc = -EFAULT;
+		break;
+	case GSMI_NOT_FOUND:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
+		rc = -ENOENT;
+		break;
+	case GSMI_LOG_FULL:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
+		rc = -ENOSPC;
+		break;
+	case GSMI_HANDSHAKE_CF:
+	case GSMI_HANDSHAKE_SPIN:
+	case GSMI_HANDSHAKE_NONE:
+		rc = result;
+		break;
+	default:
+		printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
+		       cmd, result);
+		rc = -ENXIO;
+	}
+
+	return rc;
+}
+
+#ifdef CONFIG_EFI
+
+static struct efivars efivars;
+
+static efi_status_t gsmi_get_variable(efi_char16_t *name,
+				      efi_guid_t *vendor, u32 *attr,
+				      unsigned long *data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)*data_size,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	unsigned long flags;
+	size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
+	int rc;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* Vendor guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Variable failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable was not found */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* Get the arguments back */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* The size reported is the min of all of our buffers */
+		*data_size = min_t(unsigned long, *data_size,
+						gsmi_dev.data_buf->length);
+		*data_size = min_t(unsigned long, *data_size, param.data_len);
+
+		/* Copy data back to return buffer. */
+		memcpy(data, gsmi_dev.data_buf->start, *data_size);
+
+		/* All variables are have the following attributes */
+		if (attr)
+			*attr = EFI_VARIABLE_NON_VOLATILE |
+				EFI_VARIABLE_BOOTSERVICE_ACCESS |
+				EFI_VARIABLE_RUNTIME_ACCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
+					   efi_char16_t *name,
+					   efi_guid_t *vendor)
+{
+	struct gsmi_get_next_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.name_len = gsmi_dev.name_buf->length,
+	};
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	/* For the moment, only support buffers that exactly match in size */
+	if (*name_size != GSMI_BUF_SIZE)
+		return EFI_BAD_BUFFER_SIZE;
+
+	/* Let's make sure the thing is at least null-terminated */
+	if (ucs2_strnlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
+		return EFI_INVALID_PARAMETER;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memcpy(gsmi_dev.name_buf->start, name, *name_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
+		ret = EFI_LOAD_ERROR;
+	} else if (rc == 1) {
+		/* variable not found -- end of list */
+		ret = EFI_NOT_FOUND;
+	} else {
+		/* copy variable data back to return buffer */
+		memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
+
+		/* Copy the name back */
+		memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
+		*name_size = ucs2_strnlen(name, GSMI_BUF_SIZE / 2) * 2;
+
+		/* copy guid to return buffer */
+		memcpy(vendor, &param.guid, sizeof(param.guid));
+		ret = EFI_SUCCESS;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static efi_status_t gsmi_set_variable(efi_char16_t *name,
+				      efi_guid_t *vendor,
+				      u32 attr,
+				      unsigned long data_size,
+				      void *data)
+{
+	struct gsmi_nvram_var_param param = {
+		.name_ptr = gsmi_dev.name_buf->address,
+		.data_ptr = gsmi_dev.data_buf->address,
+		.data_len = (u32)data_size,
+		.attributes = EFI_VARIABLE_NON_VOLATILE |
+			      EFI_VARIABLE_BOOTSERVICE_ACCESS |
+			      EFI_VARIABLE_RUNTIME_ACCESS,
+	};
+	size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
+	efi_status_t ret = EFI_SUCCESS;
+	int rc;
+	unsigned long flags;
+
+	if (name_len >= GSMI_BUF_SIZE / 2)
+		return EFI_BAD_BUFFER_SIZE;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* guid */
+	memcpy(&param.guid, vendor, sizeof(param.guid));
+
+	/* variable name, already in UTF-16 */
+	memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
+	memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, data, data_size);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
+	if (rc < 0) {
+		printk(KERN_ERR "gsmi: Set Variable failed\n");
+		ret = EFI_INVALID_PARAMETER;
+	}
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return ret;
+}
+
+static const struct efivar_operations efivar_ops = {
+	.get_variable = gsmi_get_variable,
+	.set_variable = gsmi_set_variable,
+	.get_next_variable = gsmi_get_next_variable,
+};
+
+#endif /* CONFIG_EFI */
+
+static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t pos, size_t count)
+{
+	struct gsmi_set_eventlog_param param = {
+		.data_ptr = gsmi_dev.data_buf->address,
+	};
+	int rc = 0;
+	unsigned long flags;
+
+	/* Pull the type out */
+	if (count < sizeof(u32))
+		return -EINVAL;
+	param.type = *(u32 *)buf;
+	buf += sizeof(u32);
+
+	/* The remaining buffer is the data payload */
+	if ((count - sizeof(u32)) > gsmi_dev.data_buf->length)
+		return -EINVAL;
+	param.data_len = count - sizeof(u32);
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Set Event Log failed\n");
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	return (rc == 0) ? count : rc;
+
+}
+
+static struct bin_attribute eventlog_bin_attr = {
+	.attr = {.name = "append_to_eventlog", .mode = 0200},
+	.write = eventlog_write,
+};
+
+static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
+					 struct kobj_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+	unsigned long val;
+	struct {
+		u32 percentage;
+		u32 data_type;
+	} param;
+
+	rc = kstrtoul(buf, 0, &val);
+	if (rc)
+		return rc;
+
+	/*
+	 * Value entered is a percentage, 0 through 100, anything else
+	 * is invalid.
+	 */
+	if (val > 100)
+		return -EINVAL;
+
+	/* data_type here selects the smbios event log. */
+	param.percentage = val;
+	param.data_type = 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_eventlog_attr = {
+	.attr = {.name = "clear_eventlog", .mode = 0200},
+	.store = gsmi_clear_eventlog_store,
+};
+
+static ssize_t gsmi_clear_config_store(struct kobject *kobj,
+				       struct kobj_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	/* clear parameter buffer */
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc)
+		return rc;
+	return count;
+}
+
+static struct kobj_attribute gsmi_clear_config_attr = {
+	.attr = {.name = "clear_config", .mode = 0200},
+	.store = gsmi_clear_config_store,
+};
+
+static const struct attribute *gsmi_attrs[] = {
+	&gsmi_clear_config_attr.attr,
+	&gsmi_clear_eventlog_attr.attr,
+	NULL,
+};
+
+static int gsmi_shutdown_reason(int reason)
+{
+	struct gsmi_log_entry_type_1 entry = {
+		.type     = GSMI_LOG_ENTRY_TYPE_KERNEL,
+		.instance = reason,
+	};
+	struct gsmi_set_eventlog_param param = {
+		.data_len = sizeof(entry),
+		.type     = 1,
+	};
+	static int saved_reason;
+	int rc = 0;
+	unsigned long flags;
+
+	/* avoid duplicate entries in the log */
+	if (saved_reason & (1 << reason))
+		return 0;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	saved_reason |= (1 << reason);
+
+	/* data pointer */
+	memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
+	memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
+
+	/* parameter buffer */
+	param.data_ptr = gsmi_dev.data_buf->address;
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+	memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
+
+	rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	if (rc < 0)
+		printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
+	else
+		printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
+		       reason);
+
+	return rc;
+}
+
+static int gsmi_reboot_callback(struct notifier_block *nb,
+				unsigned long reason, void *arg)
+{
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_reboot_notifier = {
+	.notifier_call = gsmi_reboot_callback
+};
+
+static int gsmi_die_callback(struct notifier_block *nb,
+			     unsigned long reason, void *arg)
+{
+	if (reason == DIE_OOPS)
+		gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_die_notifier = {
+	.notifier_call = gsmi_die_callback
+};
+
+static int gsmi_panic_callback(struct notifier_block *nb,
+			       unsigned long reason, void *arg)
+{
+
+	/*
+	 * Panic callbacks are executed with all other CPUs stopped,
+	 * so we must not attempt to spin waiting for gsmi_dev.lock
+	 * to be released.
+	 */
+	if (spin_is_locked(&gsmi_dev.lock))
+		return NOTIFY_DONE;
+
+	gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block gsmi_panic_notifier = {
+	.notifier_call = gsmi_panic_callback,
+};
+
+/*
+ * This hash function was blatantly copied from include/linux/hash.h.
+ * It is used by this driver to obfuscate a board name that requires a
+ * quirk within this driver.
+ *
+ * Please do not remove this copy of the function as any changes to the
+ * global utility hash_64() function would break this driver's ability
+ * to identify a board and provide the appropriate quirk -- mikew@google.com
+ */
+static u64 __init local_hash_64(u64 val, unsigned bits)
+{
+	u64 hash = val;
+
+	/*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
+	u64 n = hash;
+	n <<= 18;
+	hash -= n;
+	n <<= 33;
+	hash -= n;
+	n <<= 3;
+	hash += n;
+	n <<= 3;
+	hash -= n;
+	n <<= 4;
+	hash += n;
+	n <<= 2;
+	hash += n;
+
+	/* High bits are more random, so use them. */
+	return hash >> (64 - bits);
+}
+
+static u32 __init hash_oem_table_id(char s[8])
+{
+	u64 input;
+	memcpy(&input, s, 8);
+	return local_hash_64(input, 32);
+}
+
+static const struct dmi_system_id gsmi_dmi_table[] __initconst = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{
+		.ident = "Coreboot Firmware",
+		.matches = {
+			DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
+
+static __init int gsmi_system_valid(void)
+{
+	u32 hash;
+	u16 cmd, result;
+
+	if (!dmi_check_system(gsmi_dmi_table))
+		return -ENODEV;
+
+	/*
+	 * Only newer firmware supports the gsmi interface.  All older
+	 * firmware that didn't support this interface used to plug the
+	 * table name in the first four bytes of the oem_table_id field.
+	 * Newer firmware doesn't do that though, so use that as the
+	 * discriminant factor.  We have to do this in order to
+	 * whitewash our board names out of the public driver.
+	 */
+	if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
+		printk(KERN_INFO "gsmi: Board is too old\n");
+		return -ENODEV;
+	}
+
+	/* Disable on board with 1.0 BIOS due to Google bug 2602657 */
+	hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
+	if (hash == QUIRKY_BOARD_HASH) {
+		const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
+		if (strncmp(bios_ver, "1.0", 3) == 0) {
+			pr_info("gsmi: disabled on this board's BIOS %s\n",
+				bios_ver);
+			return -ENODEV;
+		}
+	}
+
+	/* check for valid SMI command port in ACPI FADT */
+	if (acpi_gbl_FADT.smi_command == 0) {
+		pr_info("gsmi: missing smi_command\n");
+		return -ENODEV;
+	}
+
+	/* Test the smihandler with a bogus command. If it leaves the
+	 * calling argument in %ax untouched, there is no handler for
+	 * GSMI commands.
+	 */
+	cmd = GSMI_CALLBACK | GSMI_CMD_RESERVED << 8;
+	asm volatile (
+		"outb %%al, %%dx\n\t"
+		: "=a" (result)
+		: "0" (cmd),
+		  "d" (acpi_gbl_FADT.smi_command)
+		: "memory", "cc"
+		);
+	if (cmd == result) {
+		pr_info("gsmi: no gsmi handler in firmware\n");
+		return -ENODEV;
+	}
+
+	/* Found */
+	return 0;
+}
+
+static struct kobject *gsmi_kobj;
+
+static const struct platform_device_info gsmi_dev_info = {
+	.name		= "gsmi",
+	.id		= -1,
+	/* SMI callbacks require 32bit addresses */
+	.dma_mask	= DMA_BIT_MASK(32),
+};
+
+#ifdef CONFIG_PM
+static void gsmi_log_s0ix_info(u8 cmd)
+{
+	unsigned long flags;
+
+	/*
+	 * If platform has not enabled S0ix logging, then no action is
+	 * necessary.
+	 */
+	if (!s0ix_logging_enable)
+		return;
+
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+
+	memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
+
+	gsmi_exec(GSMI_CALLBACK, cmd);
+
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+}
+
+static int gsmi_log_s0ix_suspend(struct device *dev)
+{
+	/*
+	 * If system is not suspending via firmware using the standard ACPI Sx
+	 * types, then make a GSMI call to log the suspend info.
+	 */
+	if (!pm_suspend_via_firmware())
+		gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_SUSPEND);
+
+	/*
+	 * Always return success, since we do not want suspend
+	 * to fail just because of logging failure.
+	 */
+	return 0;
+}
+
+static int gsmi_log_s0ix_resume(struct device *dev)
+{
+	/*
+	 * If system did not resume via firmware, then make a GSMI call to log
+	 * the resume info and wake source.
+	 */
+	if (!pm_resume_via_firmware())
+		gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_RESUME);
+
+	/*
+	 * Always return success, since we do not want resume
+	 * to fail just because of logging failure.
+	 */
+	return 0;
+}
+
+static const struct dev_pm_ops gsmi_pm_ops = {
+	.suspend_noirq = gsmi_log_s0ix_suspend,
+	.resume_noirq = gsmi_log_s0ix_resume,
+};
+
+static int gsmi_platform_driver_probe(struct platform_device *dev)
+{
+	return 0;
+}
+
+static struct platform_driver gsmi_driver_info = {
+	.driver = {
+		.name = "gsmi",
+		.pm = &gsmi_pm_ops,
+	},
+	.probe = gsmi_platform_driver_probe,
+};
+#endif
+
+static __init int gsmi_init(void)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = gsmi_system_valid();
+	if (ret)
+		return ret;
+
+	gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
+
+#ifdef CONFIG_PM
+	ret = platform_driver_register(&gsmi_driver_info);
+	if (unlikely(ret)) {
+		printk(KERN_ERR "gsmi: unable to register platform driver\n");
+		return ret;
+	}
+#endif
+
+	/* register device */
+	gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
+	if (IS_ERR(gsmi_dev.pdev)) {
+		printk(KERN_ERR "gsmi: unable to register platform device\n");
+		return PTR_ERR(gsmi_dev.pdev);
+	}
+
+	/* SMI access needs to be serialized */
+	spin_lock_init(&gsmi_dev.lock);
+
+	ret = -ENOMEM;
+	gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
+					     GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
+	if (!gsmi_dev.dma_pool)
+		goto out_err;
+
+	/*
+	 * pre-allocate buffers because sometimes we are called when
+	 * this is not feasible: oops, panic, die, mce, etc
+	 */
+	gsmi_dev.name_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.name_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.data_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.data_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
+		goto out_err;
+	}
+
+	gsmi_dev.param_buf = gsmi_buf_alloc();
+	if (!gsmi_dev.param_buf) {
+		printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
+		goto out_err;
+	}
+
+	/*
+	 * Determine type of handshake used to serialize the SMI
+	 * entry. See also gsmi_exec().
+	 *
+	 * There's a "behavior" present on some chipsets where writing the
+	 * SMI trigger register in the southbridge doesn't result in an
+	 * immediate SMI. Rather, the processor can execute "a few" more
+	 * instructions before the SMI takes effect. To ensure synchronous
+	 * behavior, implement a handshake between the kernel driver and the
+	 * firmware handler to spin until released. This ioctl determines
+	 * the type of handshake.
+	 *
+	 * NONE: The firmware handler does not implement any
+	 * handshake. Either it doesn't need to, or it's legacy firmware
+	 * that doesn't know it needs to and never will.
+	 *
+	 * CF: The firmware handler will clear the CF in the saved
+	 * state before returning. The driver may set the CF and test for
+	 * it to clear before proceeding.
+	 *
+	 * SPIN: The firmware handler does not implement any handshake
+	 * but the driver should spin for a hundred or so microseconds
+	 * to ensure the SMI has triggered.
+	 *
+	 * Finally, the handler will return -ENOSYS if
+	 * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
+	 * HANDSHAKE_NONE.
+	 */
+	spin_lock_irqsave(&gsmi_dev.lock, flags);
+	gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
+	gsmi_dev.handshake_type =
+	    gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
+	if (gsmi_dev.handshake_type == -ENOSYS)
+		gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
+	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
+
+	/* Remove and clean up gsmi if the handshake could not complete. */
+	if (gsmi_dev.handshake_type == -ENXIO) {
+		printk(KERN_INFO "gsmi version " DRIVER_VERSION
+		       " failed to load\n");
+		ret = -ENODEV;
+		goto out_err;
+	}
+
+	/* Register in the firmware directory */
+	ret = -ENOMEM;
+	gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
+	if (!gsmi_kobj) {
+		printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
+		goto out_err;
+	}
+
+	/* Setup eventlog access */
+	ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to setup eventlog");
+		goto out_err;
+	}
+
+	/* Other attributes */
+	ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to add attrs");
+		goto out_remove_bin_file;
+	}
+
+#ifdef CONFIG_EFI
+	ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj);
+	if (ret) {
+		printk(KERN_INFO "gsmi: Failed to register efivars\n");
+		sysfs_remove_files(gsmi_kobj, gsmi_attrs);
+		goto out_remove_bin_file;
+	}
+#endif
+
+	register_reboot_notifier(&gsmi_reboot_notifier);
+	register_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &gsmi_panic_notifier);
+
+	printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
+
+	return 0;
+
+out_remove_bin_file:
+	sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
+out_err:
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+	pr_info("gsmi: failed to load: %d\n", ret);
+#ifdef CONFIG_PM
+	platform_driver_unregister(&gsmi_driver_info);
+#endif
+	return ret;
+}
+
+static void __exit gsmi_exit(void)
+{
+	unregister_reboot_notifier(&gsmi_reboot_notifier);
+	unregister_die_notifier(&gsmi_die_notifier);
+	atomic_notifier_chain_unregister(&panic_notifier_list,
+					 &gsmi_panic_notifier);
+#ifdef CONFIG_EFI
+	efivars_unregister(&efivars);
+#endif
+
+	sysfs_remove_files(gsmi_kobj, gsmi_attrs);
+	sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
+	kobject_put(gsmi_kobj);
+	gsmi_buf_free(gsmi_dev.param_buf);
+	gsmi_buf_free(gsmi_dev.data_buf);
+	gsmi_buf_free(gsmi_dev.name_buf);
+	dma_pool_destroy(gsmi_dev.dma_pool);
+	platform_device_unregister(gsmi_dev.pdev);
+#ifdef CONFIG_PM
+	platform_driver_unregister(&gsmi_driver_info);
+#endif
+}
+
+module_init(gsmi_init);
+module_exit(gsmi_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole-coreboot.c b/drivers/firmware/google/memconsole-coreboot.c
new file mode 100644
index 000000000..d17e4d6ac
--- /dev/null
+++ b/drivers/firmware/google/memconsole-coreboot.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * memconsole-coreboot.c
+ *
+ * Memory based BIOS console accessed through coreboot table.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "memconsole.h"
+#include "coreboot_table.h"
+
+#define CB_TAG_CBMEM_CONSOLE	0x17
+
+/* CBMEM firmware console log descriptor. */
+struct cbmem_cons {
+	u32 size_dont_access_after_boot;
+	u32 cursor;
+	u8  body[];
+} __packed;
+
+#define CURSOR_MASK ((1 << 28) - 1)
+#define OVERFLOW (1 << 31)
+
+static struct cbmem_cons *cbmem_console;
+static u32 cbmem_console_size;
+
+/*
+ * The cbmem_console structure is read again on every access because it may
+ * change at any time if runtime firmware logs new messages. This may rarely
+ * lead to race conditions where the firmware overwrites the beginning of the
+ * ring buffer with more lines after we have already read |cursor|. It should be
+ * rare and harmless enough that we don't spend extra effort working around it.
+ */
+static ssize_t memconsole_coreboot_read(char *buf, loff_t pos, size_t count)
+{
+	u32 cursor = cbmem_console->cursor & CURSOR_MASK;
+	u32 flags = cbmem_console->cursor & ~CURSOR_MASK;
+	u32 size = cbmem_console_size;
+	struct seg {	/* describes ring buffer segments in logical order */
+		u32 phys;	/* physical offset from start of mem buffer */
+		u32 len;	/* length of segment */
+	} seg[2] = { {0}, {0} };
+	size_t done = 0;
+	int i;
+
+	if (flags & OVERFLOW) {
+		if (cursor > size)	/* Shouldn't really happen, but... */
+			cursor = 0;
+		seg[0] = (struct seg){.phys = cursor, .len = size - cursor};
+		seg[1] = (struct seg){.phys = 0, .len = cursor};
+	} else {
+		seg[0] = (struct seg){.phys = 0, .len = min(cursor, size)};
+	}
+
+	for (i = 0; i < ARRAY_SIZE(seg) && count > done; i++) {
+		done += memory_read_from_buffer(buf + done, count - done, &pos,
+			cbmem_console->body + seg[i].phys, seg[i].len);
+		pos -= seg[i].len;
+	}
+	return done;
+}
+
+static int memconsole_probe(struct coreboot_device *dev)
+{
+	struct cbmem_cons *tmp_cbmc;
+
+	tmp_cbmc = memremap(dev->cbmem_ref.cbmem_addr,
+			    sizeof(*tmp_cbmc), MEMREMAP_WB);
+
+	if (!tmp_cbmc)
+		return -ENOMEM;
+
+	/* Read size only once to prevent overrun attack through /dev/mem. */
+	cbmem_console_size = tmp_cbmc->size_dont_access_after_boot;
+	cbmem_console = devm_memremap(&dev->dev, dev->cbmem_ref.cbmem_addr,
+				 cbmem_console_size + sizeof(*cbmem_console),
+				 MEMREMAP_WB);
+	memunmap(tmp_cbmc);
+
+	if (IS_ERR(cbmem_console))
+		return PTR_ERR(cbmem_console);
+
+	memconsole_setup(memconsole_coreboot_read);
+
+	return memconsole_sysfs_init();
+}
+
+static int memconsole_remove(struct coreboot_device *dev)
+{
+	memconsole_exit();
+
+	return 0;
+}
+
+static struct coreboot_driver memconsole_driver = {
+	.probe = memconsole_probe,
+	.remove = memconsole_remove,
+	.drv = {
+		.name = "memconsole",
+	},
+	.tag = CB_TAG_CBMEM_CONSOLE,
+};
+module_coreboot_driver(memconsole_driver);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole-x86-legacy.c b/drivers/firmware/google/memconsole-x86-legacy.c
new file mode 100644
index 000000000..3d3c4f6b8
--- /dev/null
+++ b/drivers/firmware/google/memconsole-x86-legacy.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * memconsole-x86-legacy.c
+ *
+ * EBDA specific parts of the memory based BIOS console.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/mm.h>
+#include <asm/bios_ebda.h>
+#include <linux/acpi.h>
+
+#include "memconsole.h"
+
+#define BIOS_MEMCONSOLE_V1_MAGIC	0xDEADBABE
+#define BIOS_MEMCONSOLE_V2_MAGIC	(('M')|('C'<<8)|('O'<<16)|('N'<<24))
+
+struct biosmemcon_ebda {
+	u32 signature;
+	union {
+		struct {
+			u8  enabled;
+			u32 buffer_addr;
+			u16 start;
+			u16 end;
+			u16 num_chars;
+			u8  wrapped;
+		} __packed v1;
+		struct {
+			u32 buffer_addr;
+			/* Misdocumented as number of pages! */
+			u16 num_bytes;
+			u16 start;
+			u16 end;
+		} __packed v2;
+	};
+} __packed;
+
+static char *memconsole_baseaddr;
+static size_t memconsole_length;
+
+static ssize_t memconsole_read(char *buf, loff_t pos, size_t count)
+{
+	return memory_read_from_buffer(buf, count, &pos, memconsole_baseaddr,
+				       memconsole_length);
+}
+
+static void found_v1_header(struct biosmemcon_ebda *hdr)
+{
+	pr_info("memconsole: BIOS console v1 EBDA structure found at %p\n",
+		hdr);
+	pr_info("memconsole: BIOS console buffer at 0x%.8x, start = %d, end = %d, num = %d\n",
+		hdr->v1.buffer_addr, hdr->v1.start,
+		hdr->v1.end, hdr->v1.num_chars);
+
+	memconsole_baseaddr = phys_to_virt(hdr->v1.buffer_addr);
+	memconsole_length = hdr->v1.num_chars;
+	memconsole_setup(memconsole_read);
+}
+
+static void found_v2_header(struct biosmemcon_ebda *hdr)
+{
+	pr_info("memconsole: BIOS console v2 EBDA structure found at %p\n",
+		hdr);
+	pr_info("memconsole: BIOS console buffer at 0x%.8x, start = %d, end = %d, num_bytes = %d\n",
+		hdr->v2.buffer_addr, hdr->v2.start,
+		hdr->v2.end, hdr->v2.num_bytes);
+
+	memconsole_baseaddr = phys_to_virt(hdr->v2.buffer_addr + hdr->v2.start);
+	memconsole_length = hdr->v2.end - hdr->v2.start;
+	memconsole_setup(memconsole_read);
+}
+
+/*
+ * Search through the EBDA for the BIOS Memory Console, and
+ * set the global variables to point to it.  Return true if found.
+ */
+static bool memconsole_ebda_init(void)
+{
+	unsigned int address;
+	size_t length, cur;
+
+	address = get_bios_ebda();
+	if (!address) {
+		pr_info("memconsole: BIOS EBDA non-existent.\n");
+		return false;
+	}
+
+	/* EBDA length is byte 0 of EBDA (in KB) */
+	length = *(u8 *)phys_to_virt(address);
+	length <<= 10; /* convert to bytes */
+
+	/*
+	 * Search through EBDA for BIOS memory console structure
+	 * note: signature is not necessarily dword-aligned
+	 */
+	for (cur = 0; cur < length; cur++) {
+		struct biosmemcon_ebda *hdr = phys_to_virt(address + cur);
+
+		/* memconsole v1 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V1_MAGIC) {
+			found_v1_header(hdr);
+			return true;
+		}
+
+		/* memconsole v2 */
+		if (hdr->signature == BIOS_MEMCONSOLE_V2_MAGIC) {
+			found_v2_header(hdr);
+			return true;
+		}
+	}
+
+	pr_info("memconsole: BIOS console EBDA structure not found!\n");
+	return false;
+}
+
+static const struct dmi_system_id memconsole_dmi_table[] __initconst = {
+	{
+		.ident = "Google Board",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
+		},
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, memconsole_dmi_table);
+
+static bool __init memconsole_find(void)
+{
+	if (!dmi_check_system(memconsole_dmi_table))
+		return false;
+
+	return memconsole_ebda_init();
+}
+
+static int __init memconsole_x86_init(void)
+{
+	if (!memconsole_find())
+		return -ENODEV;
+
+	return memconsole_sysfs_init();
+}
+
+static void __exit memconsole_x86_exit(void)
+{
+	memconsole_exit();
+}
+
+module_init(memconsole_x86_init);
+module_exit(memconsole_x86_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.c b/drivers/firmware/google/memconsole.c
new file mode 100644
index 000000000..44d314ad6
--- /dev/null
+++ b/drivers/firmware/google/memconsole.c
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * memconsole.c
+ *
+ * Architecture-independent parts of the memory based BIOS console.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+
+#include "memconsole.h"
+
+static ssize_t memconsole_read(struct file *filp, struct kobject *kobp,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t pos, size_t count)
+{
+	ssize_t (*memconsole_read_func)(char *, loff_t, size_t);
+
+	memconsole_read_func = bin_attr->private;
+	if (WARN_ON_ONCE(!memconsole_read_func))
+		return -EIO;
+
+	return memconsole_read_func(buf, pos, count);
+}
+
+static struct bin_attribute memconsole_bin_attr = {
+	.attr = {.name = "log", .mode = 0444},
+	.read = memconsole_read,
+};
+
+void memconsole_setup(ssize_t (*read_func)(char *, loff_t, size_t))
+{
+	memconsole_bin_attr.private = read_func;
+}
+EXPORT_SYMBOL(memconsole_setup);
+
+int memconsole_sysfs_init(void)
+{
+	return sysfs_create_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+EXPORT_SYMBOL(memconsole_sysfs_init);
+
+void memconsole_exit(void)
+{
+	sysfs_remove_bin_file(firmware_kobj, &memconsole_bin_attr);
+}
+EXPORT_SYMBOL(memconsole_exit);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/memconsole.h b/drivers/firmware/google/memconsole.h
new file mode 100644
index 000000000..aaff2b72b
--- /dev/null
+++ b/drivers/firmware/google/memconsole.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * memconsole.h
+ *
+ * Internal headers of the memory based BIOS console.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#ifndef __FIRMWARE_GOOGLE_MEMCONSOLE_H
+#define __FIRMWARE_GOOGLE_MEMCONSOLE_H
+
+#include <linux/types.h>
+
+/*
+ * memconsole_setup
+ *
+ * Initialize the memory console, passing the function to handle read accesses.
+ */
+void memconsole_setup(ssize_t (*read_func)(char *, loff_t, size_t));
+
+/*
+ * memconsole_sysfs_init
+ *
+ * Update memory console length and create binary file
+ * for firmware object.
+ */
+int memconsole_sysfs_init(void);
+
+/* memconsole_exit
+ *
+ * Unmap the console buffer.
+ */
+void memconsole_exit(void);
+
+#endif /* __FIRMWARE_GOOGLE_MEMCONSOLE_H */
diff --git a/drivers/firmware/google/vpd.c b/drivers/firmware/google/vpd.c
new file mode 100644
index 000000000..d23c5c69a
--- /dev/null
+++ b/drivers/firmware/google/vpd.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vpd.c
+ *
+ * Driver for exporting VPD content to sysfs.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+#include "coreboot_table.h"
+#include "vpd_decode.h"
+
+#define CB_TAG_VPD      0x2c
+#define VPD_CBMEM_MAGIC 0x43524f53
+
+static struct kobject *vpd_kobj;
+
+struct vpd_cbmem {
+	u32 magic;
+	u32 version;
+	u32 ro_size;
+	u32 rw_size;
+	u8  blob[];
+};
+
+struct vpd_section {
+	bool enabled;
+	const char *name;
+	char *raw_name;                /* the string name_raw */
+	struct kobject *kobj;          /* vpd/name directory */
+	char *baseaddr;
+	struct bin_attribute bin_attr; /* vpd/name_raw bin_attribute */
+	struct list_head attribs;      /* key/value in vpd_attrib_info list */
+};
+
+struct vpd_attrib_info {
+	char *key;
+	const char *value;
+	struct bin_attribute bin_attr;
+	struct list_head list;
+};
+
+static struct vpd_section ro_vpd;
+static struct vpd_section rw_vpd;
+
+static ssize_t vpd_attrib_read(struct file *filp, struct kobject *kobp,
+			       struct bin_attribute *bin_attr, char *buf,
+			       loff_t pos, size_t count)
+{
+	struct vpd_attrib_info *info = bin_attr->private;
+
+	return memory_read_from_buffer(buf, count, &pos, info->value,
+				       info->bin_attr.size);
+}
+
+/*
+ * vpd_section_check_key_name()
+ *
+ * The VPD specification supports only [a-zA-Z0-9_]+ characters in key names but
+ * old firmware versions may have entries like "S/N" which are problematic when
+ * exporting them as sysfs attributes. These keys present in old firmwares are
+ * ignored.
+ *
+ * Returns VPD_OK for a valid key name, VPD_FAIL otherwise.
+ *
+ * @key: The key name to check
+ * @key_len: key name length
+ */
+static int vpd_section_check_key_name(const u8 *key, s32 key_len)
+{
+	int c;
+
+	while (key_len-- > 0) {
+		c = *key++;
+
+		if (!isalnum(c) && c != '_')
+			return VPD_FAIL;
+	}
+
+	return VPD_OK;
+}
+
+static int vpd_section_attrib_add(const u8 *key, u32 key_len,
+				  const u8 *value, u32 value_len,
+				  void *arg)
+{
+	int ret;
+	struct vpd_section *sec = arg;
+	struct vpd_attrib_info *info;
+
+	/*
+	 * Return VPD_OK immediately to decode next entry if the current key
+	 * name contains invalid characters.
+	 */
+	if (vpd_section_check_key_name(key, key_len) != VPD_OK)
+		return VPD_OK;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->key = kstrndup(key, key_len, GFP_KERNEL);
+	if (!info->key) {
+		ret = -ENOMEM;
+		goto free_info;
+	}
+
+	sysfs_bin_attr_init(&info->bin_attr);
+	info->bin_attr.attr.name = info->key;
+	info->bin_attr.attr.mode = 0444;
+	info->bin_attr.size = value_len;
+	info->bin_attr.read = vpd_attrib_read;
+	info->bin_attr.private = info;
+
+	info->value = value;
+
+	INIT_LIST_HEAD(&info->list);
+
+	ret = sysfs_create_bin_file(sec->kobj, &info->bin_attr);
+	if (ret)
+		goto free_info_key;
+
+	list_add_tail(&info->list, &sec->attribs);
+	return 0;
+
+free_info_key:
+	kfree(info->key);
+free_info:
+	kfree(info);
+
+	return ret;
+}
+
+static void vpd_section_attrib_destroy(struct vpd_section *sec)
+{
+	struct vpd_attrib_info *info;
+	struct vpd_attrib_info *temp;
+
+	list_for_each_entry_safe(info, temp, &sec->attribs, list) {
+		sysfs_remove_bin_file(sec->kobj, &info->bin_attr);
+		kfree(info->key);
+		kfree(info);
+	}
+}
+
+static ssize_t vpd_section_read(struct file *filp, struct kobject *kobp,
+				struct bin_attribute *bin_attr, char *buf,
+				loff_t pos, size_t count)
+{
+	struct vpd_section *sec = bin_attr->private;
+
+	return memory_read_from_buffer(buf, count, &pos, sec->baseaddr,
+				       sec->bin_attr.size);
+}
+
+static int vpd_section_create_attribs(struct vpd_section *sec)
+{
+	s32 consumed;
+	int ret;
+
+	consumed = 0;
+	do {
+		ret = vpd_decode_string(sec->bin_attr.size, sec->baseaddr,
+					&consumed, vpd_section_attrib_add, sec);
+	} while (ret == VPD_OK);
+
+	return 0;
+}
+
+static int vpd_section_init(const char *name, struct vpd_section *sec,
+			    phys_addr_t physaddr, size_t size)
+{
+	int err;
+
+	sec->baseaddr = memremap(physaddr, size, MEMREMAP_WB);
+	if (!sec->baseaddr)
+		return -ENOMEM;
+
+	sec->name = name;
+
+	/* We want to export the raw partition with name ${name}_raw */
+	sec->raw_name = kasprintf(GFP_KERNEL, "%s_raw", name);
+	if (!sec->raw_name) {
+		err = -ENOMEM;
+		goto err_memunmap;
+	}
+
+	sysfs_bin_attr_init(&sec->bin_attr);
+	sec->bin_attr.attr.name = sec->raw_name;
+	sec->bin_attr.attr.mode = 0444;
+	sec->bin_attr.size = size;
+	sec->bin_attr.read = vpd_section_read;
+	sec->bin_attr.private = sec;
+
+	err = sysfs_create_bin_file(vpd_kobj, &sec->bin_attr);
+	if (err)
+		goto err_free_raw_name;
+
+	sec->kobj = kobject_create_and_add(name, vpd_kobj);
+	if (!sec->kobj) {
+		err = -EINVAL;
+		goto err_sysfs_remove;
+	}
+
+	INIT_LIST_HEAD(&sec->attribs);
+	vpd_section_create_attribs(sec);
+
+	sec->enabled = true;
+
+	return 0;
+
+err_sysfs_remove:
+	sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
+err_free_raw_name:
+	kfree(sec->raw_name);
+err_memunmap:
+	memunmap(sec->baseaddr);
+	return err;
+}
+
+static int vpd_section_destroy(struct vpd_section *sec)
+{
+	if (sec->enabled) {
+		vpd_section_attrib_destroy(sec);
+		kobject_put(sec->kobj);
+		sysfs_remove_bin_file(vpd_kobj, &sec->bin_attr);
+		kfree(sec->raw_name);
+		memunmap(sec->baseaddr);
+		sec->enabled = false;
+	}
+
+	return 0;
+}
+
+static int vpd_sections_init(phys_addr_t physaddr)
+{
+	struct vpd_cbmem *temp;
+	struct vpd_cbmem header;
+	int ret = 0;
+
+	temp = memremap(physaddr, sizeof(struct vpd_cbmem), MEMREMAP_WB);
+	if (!temp)
+		return -ENOMEM;
+
+	memcpy(&header, temp, sizeof(struct vpd_cbmem));
+	memunmap(temp);
+
+	if (header.magic != VPD_CBMEM_MAGIC)
+		return -ENODEV;
+
+	if (header.ro_size) {
+		ret = vpd_section_init("ro", &ro_vpd,
+				       physaddr + sizeof(struct vpd_cbmem),
+				       header.ro_size);
+		if (ret)
+			return ret;
+	}
+
+	if (header.rw_size) {
+		ret = vpd_section_init("rw", &rw_vpd,
+				       physaddr + sizeof(struct vpd_cbmem) +
+				       header.ro_size, header.rw_size);
+		if (ret) {
+			vpd_section_destroy(&ro_vpd);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int vpd_probe(struct coreboot_device *dev)
+{
+	int ret;
+
+	vpd_kobj = kobject_create_and_add("vpd", firmware_kobj);
+	if (!vpd_kobj)
+		return -ENOMEM;
+
+	ret = vpd_sections_init(dev->cbmem_ref.cbmem_addr);
+	if (ret) {
+		kobject_put(vpd_kobj);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int vpd_remove(struct coreboot_device *dev)
+{
+	vpd_section_destroy(&ro_vpd);
+	vpd_section_destroy(&rw_vpd);
+
+	kobject_put(vpd_kobj);
+
+	return 0;
+}
+
+static struct coreboot_driver vpd_driver = {
+	.probe = vpd_probe,
+	.remove = vpd_remove,
+	.drv = {
+		.name = "vpd",
+	},
+	.tag = CB_TAG_VPD,
+};
+module_coreboot_driver(vpd_driver);
+
+MODULE_AUTHOR("Google, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/firmware/google/vpd_decode.c b/drivers/firmware/google/vpd_decode.c
new file mode 100644
index 000000000..5c6f2a74f
--- /dev/null
+++ b/drivers/firmware/google/vpd_decode.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * vpd_decode.c
+ *
+ * Google VPD decoding routines.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#include "vpd_decode.h"
+
+static int vpd_decode_len(const u32 max_len, const u8 *in,
+			  u32 *length, u32 *decoded_len)
+{
+	u8 more;
+	int i = 0;
+
+	if (!length || !decoded_len)
+		return VPD_FAIL;
+
+	*length = 0;
+	do {
+		if (i >= max_len)
+			return VPD_FAIL;
+
+		more = in[i] & 0x80;
+		*length <<= 7;
+		*length |= in[i] & 0x7f;
+		++i;
+	} while (more);
+
+	*decoded_len = i;
+	return VPD_OK;
+}
+
+static int vpd_decode_entry(const u32 max_len, const u8 *input_buf,
+			    u32 *_consumed, const u8 **entry, u32 *entry_len)
+{
+	u32 decoded_len;
+	u32 consumed = *_consumed;
+
+	if (vpd_decode_len(max_len - consumed, &input_buf[consumed],
+			   entry_len, &decoded_len) != VPD_OK)
+		return VPD_FAIL;
+	if (max_len - consumed < decoded_len)
+		return VPD_FAIL;
+
+	consumed += decoded_len;
+	*entry = input_buf + consumed;
+
+	/* entry_len is untrusted data and must be checked again. */
+	if (max_len - consumed < *entry_len)
+		return VPD_FAIL;
+
+	consumed += *entry_len;
+	*_consumed = consumed;
+	return VPD_OK;
+}
+
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
+		      vpd_decode_callback callback, void *callback_arg)
+{
+	int type;
+	u32 key_len;
+	u32 value_len;
+	const u8 *key;
+	const u8 *value;
+
+	/* type */
+	if (*consumed >= max_len)
+		return VPD_FAIL;
+
+	type = input_buf[*consumed];
+
+	switch (type) {
+	case VPD_TYPE_INFO:
+	case VPD_TYPE_STRING:
+		(*consumed)++;
+
+		if (vpd_decode_entry(max_len, input_buf, consumed, &key,
+				     &key_len) != VPD_OK)
+			return VPD_FAIL;
+
+		if (vpd_decode_entry(max_len, input_buf, consumed, &value,
+				     &value_len) != VPD_OK)
+			return VPD_FAIL;
+
+		if (type == VPD_TYPE_STRING)
+			return callback(key, key_len, value, value_len,
+					callback_arg);
+		break;
+
+	default:
+		return VPD_FAIL;
+	}
+
+	return VPD_OK;
+}
diff --git a/drivers/firmware/google/vpd_decode.h b/drivers/firmware/google/vpd_decode.h
new file mode 100644
index 000000000..8dbe41cac
--- /dev/null
+++ b/drivers/firmware/google/vpd_decode.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vpd_decode.h
+ *
+ * Google VPD decoding routines.
+ *
+ * Copyright 2017 Google Inc.
+ */
+
+#ifndef __VPD_DECODE_H
+#define __VPD_DECODE_H
+
+#include <linux/types.h>
+
+enum {
+	VPD_OK = 0,
+	VPD_FAIL,
+};
+
+enum {
+	VPD_TYPE_TERMINATOR = 0,
+	VPD_TYPE_STRING,
+	VPD_TYPE_INFO                = 0xfe,
+	VPD_TYPE_IMPLICIT_TERMINATOR = 0xff,
+};
+
+/* Callback for vpd_decode_string to invoke. */
+typedef int vpd_decode_callback(const u8 *key, u32 key_len,
+				const u8 *value, u32 value_len,
+				void *arg);
+
+/*
+ * vpd_decode_string
+ *
+ * Given the encoded string, this function invokes callback with extracted
+ * (key, value). The *consumed will be plused the number of bytes consumed in
+ * this function.
+ *
+ * The input_buf points to the first byte of the input buffer.
+ *
+ * The *consumed starts from 0, which is actually the next byte to be decoded.
+ * It can be non-zero to be used in multiple calls.
+ *
+ * If one entry is successfully decoded, sends it to callback and returns the
+ * result.
+ */
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
+		      vpd_decode_callback callback, void *callback_arg);
+
+#endif  /* __VPD_DECODE_H */
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
new file mode 100644
index 000000000..c027d99f2
--- /dev/null
+++ b/drivers/firmware/imx/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config IMX_DSP
+	tristate "IMX DSP Protocol driver"
+	depends on IMX_MBOX
+	help
+	  This enables DSP IPC protocol between host AP (Linux)
+	  and the firmware running on DSP.
+	  DSP exists on some i.MX8 processors (e.g i.MX8QM, i.MX8QXP).
+
+	  It acts like a doorbell. Client might use shared memory to
+	  exchange information with DSP side.
+
+config IMX_SCU
+	bool "IMX SCU Protocol driver"
+	depends on IMX_MBOX
+	select SOC_BUS
+	help
+	  The System Controller Firmware (SCFW) is a low-level system function
+	  which runs on a dedicated Cortex-M core to provide power, clock, and
+	  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+	  (QM, QP), and i.MX8QX (QXP, DX).
+
+	  This driver manages the IPC interface between host CPU and the
+	  SCU firmware running on M4.
+
+config IMX_SCU_PD
+	bool "IMX SCU Power Domain driver"
+	depends on IMX_SCU
+	help
+	  The System Controller Firmware (SCFW) based power domain driver.
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
new file mode 100644
index 000000000..b76acbade
--- /dev/null
+++ b/drivers/firmware/imx/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_IMX_DSP)		+= imx-dsp.o
+obj-$(CONFIG_IMX_SCU)		+= imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
+obj-$(CONFIG_IMX_SCU_PD)	+= scu-pd.o
diff --git a/drivers/firmware/imx/imx-dsp.c b/drivers/firmware/imx/imx-dsp.c
new file mode 100644
index 000000000..4265e9dbe
--- /dev/null
+++ b/drivers/firmware/imx/imx-dsp.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *  Author: Daniel Baluta <daniel.baluta@nxp.com>
+ *
+ * Implementation of the DSP IPC interface (host side)
+ */
+
+#include <linux/firmware/imx/dsp.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * imx_dsp_ring_doorbell - triggers an interrupt on the other side (DSP)
+ *
+ * @dsp: DSP IPC handle
+ * @chan_idx: index of the channel where to trigger the interrupt
+ *
+ * Returns non-negative value for success, negative value for error
+ */
+int imx_dsp_ring_doorbell(struct imx_dsp_ipc *ipc, unsigned int idx)
+{
+	int ret;
+	struct imx_dsp_chan *dsp_chan;
+
+	if (idx >= DSP_MU_CHAN_NUM)
+		return -EINVAL;
+
+	dsp_chan = &ipc->chans[idx];
+	ret = mbox_send_message(dsp_chan->ch, NULL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dsp_ring_doorbell);
+
+/*
+ * imx_dsp_handle_rx - rx callback used by imx mailbox
+ *
+ * @c: mbox client
+ * @msg: message received
+ *
+ * Users of DSP IPC will need to privde handle_reply and handle_request
+ * callbacks.
+ */
+static void imx_dsp_handle_rx(struct mbox_client *c, void *msg)
+{
+	struct imx_dsp_chan *chan = container_of(c, struct imx_dsp_chan, cl);
+
+	if (chan->idx == 0) {
+		chan->ipc->ops->handle_reply(chan->ipc);
+	} else {
+		chan->ipc->ops->handle_request(chan->ipc);
+		imx_dsp_ring_doorbell(chan->ipc, 1);
+	}
+}
+
+static int imx_dsp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_dsp_ipc *dsp_ipc;
+	struct imx_dsp_chan *dsp_chan;
+	struct mbox_client *cl;
+	char *chan_name;
+	int ret;
+	int i, j;
+
+	device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
+	dsp_ipc = devm_kzalloc(dev, sizeof(*dsp_ipc), GFP_KERNEL);
+	if (!dsp_ipc)
+		return -ENOMEM;
+
+	for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
+		if (i < 2)
+			chan_name = kasprintf(GFP_KERNEL, "txdb%d", i);
+		else
+			chan_name = kasprintf(GFP_KERNEL, "rxdb%d", i - 2);
+
+		if (!chan_name)
+			return -ENOMEM;
+
+		dsp_chan = &dsp_ipc->chans[i];
+		cl = &dsp_chan->cl;
+		cl->dev = dev;
+		cl->tx_block = false;
+		cl->knows_txdone = true;
+		cl->rx_callback = imx_dsp_handle_rx;
+
+		dsp_chan->ipc = dsp_ipc;
+		dsp_chan->idx = i % 2;
+		dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
+		if (IS_ERR(dsp_chan->ch)) {
+			ret = PTR_ERR(dsp_chan->ch);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to request mbox chan %s ret %d\n",
+					chan_name, ret);
+			goto out;
+		}
+
+		dev_dbg(dev, "request mbox chan %s\n", chan_name);
+		/* chan_name is not used anymore by framework */
+		kfree(chan_name);
+	}
+
+	dsp_ipc->dev = dev;
+
+	dev_set_drvdata(dev, dsp_ipc);
+
+	dev_info(dev, "NXP i.MX DSP IPC initialized\n");
+
+	return 0;
+out:
+	kfree(chan_name);
+	for (j = 0; j < i; j++) {
+		dsp_chan = &dsp_ipc->chans[j];
+		mbox_free_channel(dsp_chan->ch);
+	}
+
+	return ret;
+}
+
+static int imx_dsp_remove(struct platform_device *pdev)
+{
+	struct imx_dsp_chan *dsp_chan;
+	struct imx_dsp_ipc *dsp_ipc;
+	int i;
+
+	dsp_ipc = dev_get_drvdata(&pdev->dev);
+
+	for (i = 0; i < DSP_MU_CHAN_NUM; i++) {
+		dsp_chan = &dsp_ipc->chans[i];
+		mbox_free_channel(dsp_chan->ch);
+	}
+
+	return 0;
+}
+
+static struct platform_driver imx_dsp_driver = {
+	.driver = {
+		.name = "imx-dsp",
+	},
+	.probe = imx_dsp_probe,
+	.remove = imx_dsp_remove,
+};
+builtin_platform_driver(imx_dsp_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@nxp.com>");
+MODULE_DESCRIPTION("IMX DSP IPC protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/imx-scu-irq.c b/drivers/firmware/imx/imx-scu-irq.c
new file mode 100644
index 000000000..d9dcc2094
--- /dev/null
+++ b/drivers/firmware/imx/imx-scu-irq.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ *
+ * Implementation of the SCU IRQ functions using MU.
+ *
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/mailbox_client.h>
+#include <linux/suspend.h>
+
+#define IMX_SC_IRQ_FUNC_ENABLE	1
+#define IMX_SC_IRQ_FUNC_STATUS	2
+#define IMX_SC_IRQ_NUM_GROUP	4
+
+static u32 mu_resource_id;
+
+struct imx_sc_msg_irq_get_status {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct {
+			u16 resource;
+			u8 group;
+			u8 reserved;
+		} __packed req;
+		struct {
+			u32 status;
+		} resp;
+	} data;
+};
+
+struct imx_sc_msg_irq_enable {
+	struct imx_sc_rpc_msg hdr;
+	u32 mask;
+	u16 resource;
+	u8 group;
+	u8 enable;
+} __packed;
+
+static struct imx_sc_ipc *imx_sc_irq_ipc_handle;
+static struct work_struct imx_sc_irq_work;
+static ATOMIC_NOTIFIER_HEAD(imx_scu_irq_notifier_chain);
+
+int imx_scu_irq_register_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(
+		&imx_scu_irq_notifier_chain, nb);
+}
+EXPORT_SYMBOL(imx_scu_irq_register_notifier);
+
+int imx_scu_irq_unregister_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(
+		&imx_scu_irq_notifier_chain, nb);
+}
+EXPORT_SYMBOL(imx_scu_irq_unregister_notifier);
+
+static int imx_scu_irq_notifier_call_chain(unsigned long status, u8 *group)
+{
+	return atomic_notifier_call_chain(&imx_scu_irq_notifier_chain,
+		status, (void *)group);
+}
+
+static void imx_scu_irq_work_handler(struct work_struct *work)
+{
+	struct imx_sc_msg_irq_get_status msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	u32 irq_status;
+	int ret;
+	u8 i;
+
+	for (i = 0; i < IMX_SC_IRQ_NUM_GROUP; i++) {
+		hdr->ver = IMX_SC_RPC_VERSION;
+		hdr->svc = IMX_SC_RPC_SVC_IRQ;
+		hdr->func = IMX_SC_IRQ_FUNC_STATUS;
+		hdr->size = 2;
+
+		msg.data.req.resource = mu_resource_id;
+		msg.data.req.group = i;
+
+		ret = imx_scu_call_rpc(imx_sc_irq_ipc_handle, &msg, true);
+		if (ret) {
+			pr_err("get irq group %d status failed, ret %d\n",
+			       i, ret);
+			return;
+		}
+
+		irq_status = msg.data.resp.status;
+		if (!irq_status)
+			continue;
+
+		pm_system_wakeup();
+		imx_scu_irq_notifier_call_chain(irq_status, &i);
+	}
+}
+
+int imx_scu_irq_group_enable(u8 group, u32 mask, u8 enable)
+{
+	struct imx_sc_msg_irq_enable msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	if (!imx_sc_irq_ipc_handle)
+		return -EPROBE_DEFER;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_IRQ;
+	hdr->func = IMX_SC_IRQ_FUNC_ENABLE;
+	hdr->size = 3;
+
+	msg.resource = mu_resource_id;
+	msg.group = group;
+	msg.mask = mask;
+	msg.enable = enable;
+
+	ret = imx_scu_call_rpc(imx_sc_irq_ipc_handle, &msg, true);
+	if (ret)
+		pr_err("enable irq failed, group %d, mask %d, ret %d\n",
+			group, mask, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL(imx_scu_irq_group_enable);
+
+static void imx_scu_irq_callback(struct mbox_client *c, void *msg)
+{
+	schedule_work(&imx_sc_irq_work);
+}
+
+int imx_scu_enable_general_irq_channel(struct device *dev)
+{
+	struct of_phandle_args spec;
+	struct mbox_client *cl;
+	struct mbox_chan *ch;
+	int ret = 0, i = 0;
+
+	ret = imx_scu_get_handle(&imx_sc_irq_ipc_handle);
+	if (ret)
+		return ret;
+
+	cl = devm_kzalloc(dev, sizeof(*cl), GFP_KERNEL);
+	if (!cl)
+		return -ENOMEM;
+
+	cl->dev = dev;
+	cl->rx_callback = imx_scu_irq_callback;
+
+	/* SCU general IRQ uses general interrupt channel 3 */
+	ch = mbox_request_channel_byname(cl, "gip3");
+	if (IS_ERR(ch)) {
+		ret = PTR_ERR(ch);
+		dev_err(dev, "failed to request mbox chan gip3, ret %d\n", ret);
+		devm_kfree(dev, cl);
+		return ret;
+	}
+
+	INIT_WORK(&imx_sc_irq_work, imx_scu_irq_work_handler);
+
+	if (!of_parse_phandle_with_args(dev->of_node, "mboxes",
+				       "#mbox-cells", 0, &spec))
+		i = of_alias_get_id(spec.np, "mu");
+
+	/* use mu1 as general mu irq channel if failed */
+	if (i < 0)
+		i = 1;
+
+	mu_resource_id = IMX_SC_R_MU_0A + i;
+
+	return ret;
+}
+EXPORT_SYMBOL(imx_scu_enable_general_irq_channel);
diff --git a/drivers/firmware/imx/imx-scu-soc.c b/drivers/firmware/imx/imx-scu-soc.c
new file mode 100644
index 000000000..2f32353de
--- /dev/null
+++ b/drivers/firmware/imx/imx-scu-soc.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+static struct imx_sc_ipc *imx_sc_soc_ipc_handle;
+
+struct imx_sc_msg_misc_get_soc_id {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct {
+			u32 control;
+			u16 resource;
+		} __packed req;
+		struct {
+			u32 id;
+		} resp;
+	} data;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_soc_uid {
+	struct imx_sc_rpc_msg hdr;
+	u32 uid_low;
+	u32 uid_high;
+} __packed;
+
+static int imx_scu_soc_uid(u64 *soc_uid)
+{
+	struct imx_sc_msg_misc_get_soc_uid msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
+	hdr->size = 1;
+
+	ret = imx_scu_call_rpc(imx_sc_soc_ipc_handle, &msg, true);
+	if (ret) {
+		pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
+		return ret;
+	}
+
+	*soc_uid = msg.uid_high;
+	*soc_uid <<= 32;
+	*soc_uid |= msg.uid_low;
+
+	return 0;
+}
+
+static int imx_scu_soc_id(void)
+{
+	struct imx_sc_msg_misc_get_soc_id msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+	hdr->size = 3;
+
+	msg.data.req.control = IMX_SC_C_ID;
+	msg.data.req.resource = IMX_SC_R_SYSTEM;
+
+	ret = imx_scu_call_rpc(imx_sc_soc_ipc_handle, &msg, true);
+	if (ret) {
+		pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+		return ret;
+	}
+
+	return msg.data.resp.id;
+}
+
+int imx_scu_soc_init(struct device *dev)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	int id, ret;
+	u64 uid = 0;
+	u32 val;
+
+	ret = imx_scu_get_handle(&imx_sc_soc_ipc_handle);
+	if (ret)
+		return ret;
+
+	soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr),
+				    GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = "Freescale i.MX";
+
+	ret = of_property_read_string(of_root,
+				      "model",
+				      &soc_dev_attr->machine);
+	if (ret)
+		return ret;
+
+	id = imx_scu_soc_id();
+	if (id < 0)
+		return -EINVAL;
+
+	ret = imx_scu_soc_uid(&uid);
+	if (ret < 0)
+		return -EINVAL;
+
+	/* format soc_id value passed from SCU firmware */
+	val = id & 0x1f;
+	soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
+	if (!soc_dev_attr->soc_id)
+		return -ENOMEM;
+
+	/* format revision value passed from SCU firmware */
+	val = (id >> 5) & 0xf;
+	val = (((val >> 2) + 1) << 4) | (val & 0x3);
+	soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+						(val >> 4) & 0xf, val & 0xf);
+	if (!soc_dev_attr->revision)
+		return -ENOMEM;
+
+	soc_dev_attr->serial_number = devm_kasprintf(dev, GFP_KERNEL,
+						     "%016llX", uid);
+	if (!soc_dev_attr->serial_number)
+		return -ENOMEM;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		return PTR_ERR(soc_dev);
+
+	return 0;
+}
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
new file mode 100644
index 000000000..dca79cacc
--- /dev/null
+++ b/drivers/firmware/imx/imx-scu.c
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *  Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * Implementation of the SCU IPC functions using MUs (client side).
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define SCU_MU_CHAN_NUM		8
+#define MAX_RX_TIMEOUT		(msecs_to_jiffies(30))
+
+struct imx_sc_chan {
+	struct imx_sc_ipc *sc_ipc;
+
+	struct mbox_client cl;
+	struct mbox_chan *ch;
+	int idx;
+	struct completion tx_done;
+};
+
+struct imx_sc_ipc {
+	/* SCU uses 4 Tx and 4 Rx channels */
+	struct imx_sc_chan chans[SCU_MU_CHAN_NUM];
+	struct device *dev;
+	struct mutex lock;
+	struct completion done;
+	bool fast_ipc;
+
+	/* temporarily store the SCU msg */
+	u32 *msg;
+	u8 rx_size;
+	u8 count;
+};
+
+/*
+ * This type is used to indicate error response for most functions.
+ */
+enum imx_sc_error_codes {
+	IMX_SC_ERR_NONE = 0,	/* Success */
+	IMX_SC_ERR_VERSION = 1,	/* Incompatible API version */
+	IMX_SC_ERR_CONFIG = 2,	/* Configuration error */
+	IMX_SC_ERR_PARM = 3,	/* Bad parameter */
+	IMX_SC_ERR_NOACCESS = 4,	/* Permission error (no access) */
+	IMX_SC_ERR_LOCKED = 5,	/* Permission error (locked) */
+	IMX_SC_ERR_UNAVAILABLE = 6,	/* Unavailable (out of resources) */
+	IMX_SC_ERR_NOTFOUND = 7,	/* Not found */
+	IMX_SC_ERR_NOPOWER = 8,	/* No power */
+	IMX_SC_ERR_IPC = 9,		/* Generic IPC error */
+	IMX_SC_ERR_BUSY = 10,	/* Resource is currently busy/active */
+	IMX_SC_ERR_FAIL = 11,	/* General I/O failure */
+	IMX_SC_ERR_LAST
+};
+
+static int imx_sc_linux_errmap[IMX_SC_ERR_LAST] = {
+	0,	 /* IMX_SC_ERR_NONE */
+	-EINVAL, /* IMX_SC_ERR_VERSION */
+	-EINVAL, /* IMX_SC_ERR_CONFIG */
+	-EINVAL, /* IMX_SC_ERR_PARM */
+	-EACCES, /* IMX_SC_ERR_NOACCESS */
+	-EACCES, /* IMX_SC_ERR_LOCKED */
+	-ERANGE, /* IMX_SC_ERR_UNAVAILABLE */
+	-EEXIST, /* IMX_SC_ERR_NOTFOUND */
+	-EPERM,	 /* IMX_SC_ERR_NOPOWER */
+	-EPIPE,	 /* IMX_SC_ERR_IPC */
+	-EBUSY,	 /* IMX_SC_ERR_BUSY */
+	-EIO,	 /* IMX_SC_ERR_FAIL */
+};
+
+static struct imx_sc_ipc *imx_sc_ipc_handle;
+
+static inline int imx_sc_to_linux_errno(int errno)
+{
+	if (errno >= IMX_SC_ERR_NONE && errno < IMX_SC_ERR_LAST)
+		return imx_sc_linux_errmap[errno];
+	return -EIO;
+}
+
+/*
+ * Get the default handle used by SCU
+ */
+int imx_scu_get_handle(struct imx_sc_ipc **ipc)
+{
+	if (!imx_sc_ipc_handle)
+		return -EPROBE_DEFER;
+
+	*ipc = imx_sc_ipc_handle;
+	return 0;
+}
+EXPORT_SYMBOL(imx_scu_get_handle);
+
+/* Callback called when the word of a message is ack-ed, eg read by SCU */
+static void imx_scu_tx_done(struct mbox_client *cl, void *mssg, int r)
+{
+	struct imx_sc_chan *sc_chan = container_of(cl, struct imx_sc_chan, cl);
+
+	complete(&sc_chan->tx_done);
+}
+
+static void imx_scu_rx_callback(struct mbox_client *c, void *msg)
+{
+	struct imx_sc_chan *sc_chan = container_of(c, struct imx_sc_chan, cl);
+	struct imx_sc_ipc *sc_ipc = sc_chan->sc_ipc;
+	struct imx_sc_rpc_msg *hdr;
+	u32 *data = msg;
+	int i;
+
+	if (!sc_ipc->msg) {
+		dev_warn(sc_ipc->dev, "unexpected rx idx %d 0x%08x, ignore!\n",
+				sc_chan->idx, *data);
+		return;
+	}
+
+	if (sc_ipc->fast_ipc) {
+		hdr = msg;
+		sc_ipc->rx_size = hdr->size;
+		sc_ipc->msg[0] = *data++;
+
+		for (i = 1; i < sc_ipc->rx_size; i++)
+			sc_ipc->msg[i] = *data++;
+
+		complete(&sc_ipc->done);
+
+		return;
+	}
+
+	if (sc_chan->idx == 0) {
+		hdr = msg;
+		sc_ipc->rx_size = hdr->size;
+		dev_dbg(sc_ipc->dev, "msg rx size %u\n", sc_ipc->rx_size);
+		if (sc_ipc->rx_size > 4)
+			dev_warn(sc_ipc->dev, "RPC does not support receiving over 4 words: %u\n",
+				 sc_ipc->rx_size);
+	}
+
+	sc_ipc->msg[sc_chan->idx] = *data;
+	sc_ipc->count++;
+
+	dev_dbg(sc_ipc->dev, "mu %u msg %u 0x%x\n", sc_chan->idx,
+		sc_ipc->count, *data);
+
+	if ((sc_ipc->rx_size != 0) && (sc_ipc->count == sc_ipc->rx_size))
+		complete(&sc_ipc->done);
+}
+
+static int imx_scu_ipc_write(struct imx_sc_ipc *sc_ipc, void *msg)
+{
+	struct imx_sc_rpc_msg hdr = *(struct imx_sc_rpc_msg *)msg;
+	struct imx_sc_chan *sc_chan;
+	u32 *data = msg;
+	int ret;
+	int size;
+	int i;
+
+	/* Check size */
+	if (hdr.size > IMX_SC_RPC_MAX_MSG)
+		return -EINVAL;
+
+	dev_dbg(sc_ipc->dev, "RPC SVC %u FUNC %u SIZE %u\n", hdr.svc,
+		hdr.func, hdr.size);
+
+	size = sc_ipc->fast_ipc ? 1 : hdr.size;
+	for (i = 0; i < size; i++) {
+		sc_chan = &sc_ipc->chans[i % 4];
+
+		/*
+		 * SCU requires that all messages words are written
+		 * sequentially but linux MU driver implements multiple
+		 * independent channels for each register so ordering between
+		 * different channels must be ensured by SCU API interface.
+		 *
+		 * Wait for tx_done before every send to ensure that no
+		 * queueing happens at the mailbox channel level.
+		 */
+		if (!sc_ipc->fast_ipc) {
+			wait_for_completion(&sc_chan->tx_done);
+			reinit_completion(&sc_chan->tx_done);
+		}
+
+		ret = mbox_send_message(sc_chan->ch, &data[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * RPC command/response
+ */
+int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
+{
+	uint8_t saved_svc, saved_func;
+	struct imx_sc_rpc_msg *hdr;
+	int ret;
+
+	if (WARN_ON(!sc_ipc || !msg))
+		return -EINVAL;
+
+	mutex_lock(&sc_ipc->lock);
+	reinit_completion(&sc_ipc->done);
+
+	if (have_resp) {
+		sc_ipc->msg = msg;
+		saved_svc = ((struct imx_sc_rpc_msg *)msg)->svc;
+		saved_func = ((struct imx_sc_rpc_msg *)msg)->func;
+	}
+	sc_ipc->count = 0;
+	ret = imx_scu_ipc_write(sc_ipc, msg);
+	if (ret < 0) {
+		dev_err(sc_ipc->dev, "RPC send msg failed: %d\n", ret);
+		goto out;
+	}
+
+	if (have_resp) {
+		if (!wait_for_completion_timeout(&sc_ipc->done,
+						 MAX_RX_TIMEOUT)) {
+			dev_err(sc_ipc->dev, "RPC send msg timeout\n");
+			mutex_unlock(&sc_ipc->lock);
+			return -ETIMEDOUT;
+		}
+
+		/* response status is stored in hdr->func field */
+		hdr = msg;
+		ret = hdr->func;
+		/*
+		 * Some special SCU firmware APIs do NOT have return value
+		 * in hdr->func, but they do have response data, those special
+		 * APIs are defined as void function in SCU firmware, so they
+		 * should be treated as return success always.
+		 */
+		if ((saved_svc == IMX_SC_RPC_SVC_MISC) &&
+			(saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
+			 saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
+			ret = 0;
+	}
+
+out:
+	sc_ipc->msg = NULL;
+	mutex_unlock(&sc_ipc->lock);
+
+	dev_dbg(sc_ipc->dev, "RPC SVC done\n");
+
+	return imx_sc_to_linux_errno(ret);
+}
+EXPORT_SYMBOL(imx_scu_call_rpc);
+
+static int imx_scu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_sc_ipc *sc_ipc;
+	struct imx_sc_chan *sc_chan;
+	struct mbox_client *cl;
+	char *chan_name;
+	struct of_phandle_args args;
+	int num_channel;
+	int ret;
+	int i;
+
+	sc_ipc = devm_kzalloc(dev, sizeof(*sc_ipc), GFP_KERNEL);
+	if (!sc_ipc)
+		return -ENOMEM;
+
+	ret = of_parse_phandle_with_args(pdev->dev.of_node, "mboxes",
+					 "#mbox-cells", 0, &args);
+	if (ret)
+		return ret;
+
+	sc_ipc->fast_ipc = of_device_is_compatible(args.np, "fsl,imx8-mu-scu");
+
+	num_channel = sc_ipc->fast_ipc ? 2 : SCU_MU_CHAN_NUM;
+	for (i = 0; i < num_channel; i++) {
+		if (i < num_channel / 2)
+			chan_name = kasprintf(GFP_KERNEL, "tx%d", i);
+		else
+			chan_name = kasprintf(GFP_KERNEL, "rx%d",
+					      i - num_channel / 2);
+
+		if (!chan_name)
+			return -ENOMEM;
+
+		sc_chan = &sc_ipc->chans[i];
+		cl = &sc_chan->cl;
+		cl->dev = dev;
+		cl->tx_block = false;
+		cl->knows_txdone = true;
+		cl->rx_callback = imx_scu_rx_callback;
+
+		if (!sc_ipc->fast_ipc) {
+			/* Initial tx_done completion as "done" */
+			cl->tx_done = imx_scu_tx_done;
+			init_completion(&sc_chan->tx_done);
+			complete(&sc_chan->tx_done);
+		}
+
+		sc_chan->sc_ipc = sc_ipc;
+		sc_chan->idx = i % (num_channel / 2);
+		sc_chan->ch = mbox_request_channel_byname(cl, chan_name);
+		if (IS_ERR(sc_chan->ch)) {
+			ret = PTR_ERR(sc_chan->ch);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to request mbox chan %s ret %d\n",
+					chan_name, ret);
+			kfree(chan_name);
+			return ret;
+		}
+
+		dev_dbg(dev, "request mbox chan %s\n", chan_name);
+		/* chan_name is not used anymore by framework */
+		kfree(chan_name);
+	}
+
+	sc_ipc->dev = dev;
+	mutex_init(&sc_ipc->lock);
+	init_completion(&sc_ipc->done);
+
+	imx_sc_ipc_handle = sc_ipc;
+
+	ret = imx_scu_soc_init(dev);
+	if (ret)
+		dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
+
+	ret = imx_scu_enable_general_irq_channel(dev);
+	if (ret)
+		dev_warn(dev,
+			"failed to enable general irq channel: %d\n", ret);
+
+	dev_info(dev, "NXP i.MX SCU Initialized\n");
+
+	return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id imx_scu_match[] = {
+	{ .compatible = "fsl,imx-scu", },
+	{ /* Sentinel */ }
+};
+
+static struct platform_driver imx_scu_driver = {
+	.driver = {
+		.name = "imx-scu",
+		.of_match_table = imx_scu_match,
+	},
+	.probe = imx_scu_probe,
+};
+builtin_platform_driver(imx_scu_driver);
+
+MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("IMX SCU firmware protocol driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/misc.c b/drivers/firmware/imx/misc.c
new file mode 100644
index 000000000..d073cb3ce
--- /dev/null
+++ b/drivers/firmware/imx/misc.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *  Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * File containing client-side RPC functions for the MISC service. These
+ * function are ported to clients that communicate to the SC.
+ *
+ */
+
+#include <linux/firmware/imx/svc/misc.h>
+
+struct imx_sc_msg_req_misc_set_ctrl {
+	struct imx_sc_rpc_msg hdr;
+	u32 ctrl;
+	u32 val;
+	u16 resource;
+} __packed __aligned(4);
+
+struct imx_sc_msg_req_cpu_start {
+	struct imx_sc_rpc_msg hdr;
+	u32 address_hi;
+	u32 address_lo;
+	u16 resource;
+	u8 enable;
+} __packed __aligned(4);
+
+struct imx_sc_msg_req_misc_get_ctrl {
+	struct imx_sc_rpc_msg hdr;
+	u32 ctrl;
+	u16 resource;
+} __packed __aligned(4);
+
+struct imx_sc_msg_resp_misc_get_ctrl {
+	struct imx_sc_rpc_msg hdr;
+	u32 val;
+} __packed __aligned(4);
+
+/*
+ * This function sets a miscellaneous control value.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource the control is associated with
+ * @param[in]     ctrl        control to change
+ * @param[in]     val         value to apply to the control
+ *
+ * @return Returns 0 for success and < 0 for errors.
+ */
+
+int imx_sc_misc_set_control(struct imx_sc_ipc *ipc, u32 resource,
+			    u8 ctrl, u32 val)
+{
+	struct imx_sc_msg_req_misc_set_ctrl msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC;
+	hdr->func = (uint8_t)IMX_SC_MISC_FUNC_SET_CONTROL;
+	hdr->size = 4;
+
+	msg.ctrl = ctrl;
+	msg.val = val;
+	msg.resource = resource;
+
+	return imx_scu_call_rpc(ipc, &msg, true);
+}
+EXPORT_SYMBOL(imx_sc_misc_set_control);
+
+/*
+ * This function gets a miscellaneous control value.
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource the control is associated with
+ * @param[in]     ctrl        control to get
+ * @param[out]    val         pointer to return the control value
+ *
+ * @return Returns 0 for success and < 0 for errors.
+ */
+
+int imx_sc_misc_get_control(struct imx_sc_ipc *ipc, u32 resource,
+			    u8 ctrl, u32 *val)
+{
+	struct imx_sc_msg_req_misc_get_ctrl msg;
+	struct imx_sc_msg_resp_misc_get_ctrl *resp;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = (uint8_t)IMX_SC_RPC_SVC_MISC;
+	hdr->func = (uint8_t)IMX_SC_MISC_FUNC_GET_CONTROL;
+	hdr->size = 3;
+
+	msg.ctrl = ctrl;
+	msg.resource = resource;
+
+	ret = imx_scu_call_rpc(ipc, &msg, true);
+	if (ret)
+		return ret;
+
+	resp = (struct imx_sc_msg_resp_misc_get_ctrl *)&msg;
+	if (val != NULL)
+		*val = resp->val;
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_sc_misc_get_control);
+
+/*
+ * This function starts/stops a CPU identified by @resource
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource the control is associated with
+ * @param[in]     enable      true for start, false for stop
+ * @param[in]     phys_addr   initial instruction address to be executed
+ *
+ * @return Returns 0 for success and < 0 for errors.
+ */
+int imx_sc_pm_cpu_start(struct imx_sc_ipc *ipc, u32 resource,
+			bool enable, u64 phys_addr)
+{
+	struct imx_sc_msg_req_cpu_start msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_CPU_START;
+	hdr->size = 4;
+
+	msg.address_hi = phys_addr >> 32;
+	msg.address_lo = phys_addr;
+	msg.resource = resource;
+	msg.enable = enable;
+
+	return imx_scu_call_rpc(ipc, &msg, true);
+}
+EXPORT_SYMBOL(imx_sc_pm_cpu_start);
diff --git a/drivers/firmware/imx/rm.c b/drivers/firmware/imx/rm.c
new file mode 100644
index 000000000..a12db6ff3
--- /dev/null
+++ b/drivers/firmware/imx/rm.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ *
+ * File containing client-side RPC functions for the RM service. These
+ * function are ported to clients that communicate to the SC.
+ */
+
+#include <linux/firmware/imx/svc/rm.h>
+
+struct imx_sc_msg_rm_rsrc_owned {
+	struct imx_sc_rpc_msg hdr;
+	u16 resource;
+} __packed __aligned(4);
+
+/*
+ * This function check @resource is owned by current partition or not
+ *
+ * @param[in]     ipc         IPC handle
+ * @param[in]     resource    resource the control is associated with
+ *
+ * @return Returns 0 for not owned and 1 for owned.
+ */
+bool imx_sc_rm_is_resource_owned(struct imx_sc_ipc *ipc, u16 resource)
+{
+	struct imx_sc_msg_rm_rsrc_owned msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_RM;
+	hdr->func = IMX_SC_RM_FUNC_IS_RESOURCE_OWNED;
+	hdr->size = 2;
+
+	msg.resource = resource;
+
+	/*
+	 * SCU firmware only returns value 0 or 1
+	 * for resource owned check which means not owned or owned.
+	 * So it is always successful.
+	 */
+	imx_scu_call_rpc(ipc, &msg, true);
+
+	return hdr->func;
+}
+EXPORT_SYMBOL(imx_sc_rm_is_resource_owned);
diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c
new file mode 100644
index 000000000..946eea292
--- /dev/null
+++ b/drivers/firmware/imx/scu-pd.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ * Implementation of the SCU based Power Domains
+ *
+ * NOTE: a better implementation suggested by Ulf Hansson is using a
+ * single global power domain and implement the ->attach|detach_dev()
+ * callback for the genpd and use the regular of_genpd_add_provider_simple().
+ * From within the ->attach_dev(), we could get the OF node for
+ * the device that is being attached and then parse the power-domain
+ * cell containing the "resource id" and store that in the per device
+ * struct generic_pm_domain_data (we have void pointer there for
+ * storing these kind of things).
+ *
+ * Additionally, we need to implement the ->stop() and ->start()
+ * callbacks of genpd, which is where you "power on/off" devices,
+ * rather than using the above ->power_on|off() callbacks.
+ *
+ * However, there're two known issues:
+ * 1. The ->attach_dev() of power domain infrastructure still does
+ *    not support multi domains case as the struct device *dev passed
+ *    in is a virtual PD device, it does not help for parsing the real
+ *    device resource id from device tree, so it's unware of which
+ *    real sub power domain of device should be attached.
+ *
+ *    The framework needs some proper extension to support multi power
+ *    domain cases.
+ *
+ * 2. It also breaks most of current drivers as the driver probe sequence
+ *    behavior changed if removing ->power_on|off() callback and use
+ *    ->start() and ->stop() instead. genpd_dev_pm_attach will only power
+ *    up the domain and attach device, but will not call .start() which
+ *    relies on device runtime pm. That means the device power is still
+ *    not up before running driver probe function. For SCU enabled
+ *    platforms, all device drivers accessing registers/clock without power
+ *    domain enabled will trigger a HW access error. That means we need fix
+ *    most drivers probe sequence with proper runtime pm.
+ *
+ * In summary, we need fix above two issue before being able to switch to
+ * the "single global power domain" way.
+ *
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/firmware/imx/svc/rm.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+/* SCU Power Mode Protocol definition */
+struct imx_sc_msg_req_set_resource_power_mode {
+	struct imx_sc_rpc_msg hdr;
+	u16 resource;
+	u8 mode;
+} __packed __aligned(4);
+
+#define IMX_SCU_PD_NAME_SIZE 20
+struct imx_sc_pm_domain {
+	struct generic_pm_domain pd;
+	char name[IMX_SCU_PD_NAME_SIZE];
+	u32 rsrc;
+};
+
+struct imx_sc_pd_range {
+	char *name;
+	u32 rsrc;
+	u8 num;
+
+	/* add domain index */
+	bool postfix;
+	u8 start_from;
+};
+
+struct imx_sc_pd_soc {
+	const struct imx_sc_pd_range *pd_ranges;
+	u8 num_ranges;
+};
+
+static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = {
+	/* LSIO SS */
+	{ "pwm", IMX_SC_R_PWM_0, 8, true, 0 },
+	{ "gpio", IMX_SC_R_GPIO_0, 8, true, 0 },
+	{ "gpt", IMX_SC_R_GPT_0, 5, true, 0 },
+	{ "kpp", IMX_SC_R_KPP, 1, false, 0 },
+	{ "fspi", IMX_SC_R_FSPI_0, 2, true, 0 },
+	{ "mu_a", IMX_SC_R_MU_0A, 14, true, 0 },
+	{ "mu_b", IMX_SC_R_MU_5B, 9, true, 5 },
+
+	/* CONN SS */
+	{ "usb", IMX_SC_R_USB_0, 2, true, 0 },
+	{ "usb0phy", IMX_SC_R_USB_0_PHY, 1, false, 0 },
+	{ "usb2", IMX_SC_R_USB_2, 1, false, 0 },
+	{ "usb2phy", IMX_SC_R_USB_2_PHY, 1, false, 0 },
+	{ "sdhc", IMX_SC_R_SDHC_0, 3, true, 0 },
+	{ "enet", IMX_SC_R_ENET_0, 2, true, 0 },
+	{ "nand", IMX_SC_R_NAND, 1, false, 0 },
+	{ "mlb", IMX_SC_R_MLB_0, 1, true, 0 },
+
+	/* AUDIO SS */
+	{ "audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, false, 0 },
+	{ "audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, false, 0 },
+	{ "audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, false, 0 },
+	{ "audio-clk-1", IMX_SC_R_AUDIO_CLK_1, 1, false, 0 },
+	{ "dma0-ch", IMX_SC_R_DMA_0_CH0, 16, true, 0 },
+	{ "dma1-ch", IMX_SC_R_DMA_1_CH0, 16, true, 0 },
+	{ "dma2-ch", IMX_SC_R_DMA_2_CH0, 5, true, 0 },
+	{ "asrc0", IMX_SC_R_ASRC_0, 1, false, 0 },
+	{ "asrc1", IMX_SC_R_ASRC_1, 1, false, 0 },
+	{ "esai0", IMX_SC_R_ESAI_0, 1, false, 0 },
+	{ "spdif0", IMX_SC_R_SPDIF_0, 1, false, 0 },
+	{ "spdif1", IMX_SC_R_SPDIF_1, 1, false, 0 },
+	{ "sai", IMX_SC_R_SAI_0, 3, true, 0 },
+	{ "sai3", IMX_SC_R_SAI_3, 1, false, 0 },
+	{ "sai4", IMX_SC_R_SAI_4, 1, false, 0 },
+	{ "sai5", IMX_SC_R_SAI_5, 1, false, 0 },
+	{ "sai6", IMX_SC_R_SAI_6, 1, false, 0 },
+	{ "sai7", IMX_SC_R_SAI_7, 1, false, 0 },
+	{ "amix", IMX_SC_R_AMIX, 1, false, 0 },
+	{ "mqs0", IMX_SC_R_MQS_0, 1, false, 0 },
+	{ "dsp", IMX_SC_R_DSP, 1, false, 0 },
+	{ "dsp-ram", IMX_SC_R_DSP_RAM, 1, false, 0 },
+
+	/* DMA SS */
+	{ "can", IMX_SC_R_CAN_0, 3, true, 0 },
+	{ "ftm", IMX_SC_R_FTM_0, 2, true, 0 },
+	{ "lpi2c", IMX_SC_R_I2C_0, 4, true, 0 },
+	{ "adc", IMX_SC_R_ADC_0, 1, true, 0 },
+	{ "lcd", IMX_SC_R_LCD_0, 1, true, 0 },
+	{ "lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, true, 0 },
+	{ "lpuart", IMX_SC_R_UART_0, 4, true, 0 },
+	{ "lpspi", IMX_SC_R_SPI_0, 4, true, 0 },
+	{ "irqstr_dsp", IMX_SC_R_IRQSTR_DSP, 1, false, 0 },
+
+	/* VPU SS */
+	{ "vpu", IMX_SC_R_VPU, 1, false, 0 },
+	{ "vpu-pid", IMX_SC_R_VPU_PID0, 8, true, 0 },
+	{ "vpu-dec0", IMX_SC_R_VPU_DEC_0, 1, false, 0 },
+	{ "vpu-enc0", IMX_SC_R_VPU_ENC_0, 1, false, 0 },
+
+	/* GPU SS */
+	{ "gpu0-pid", IMX_SC_R_GPU_0_PID0, 4, true, 0 },
+
+	/* HSIO SS */
+	{ "pcie-b", IMX_SC_R_PCIE_B, 1, false, 0 },
+	{ "serdes-1", IMX_SC_R_SERDES_1, 1, false, 0 },
+	{ "hsio-gpio", IMX_SC_R_HSIO_GPIO, 1, false, 0 },
+
+	/* MIPI SS */
+	{ "mipi0", IMX_SC_R_MIPI_0, 1, false, 0 },
+	{ "mipi0-pwm0", IMX_SC_R_MIPI_0_PWM_0, 1, false, 0 },
+	{ "mipi0-i2c", IMX_SC_R_MIPI_0_I2C_0, 2, true, 0 },
+
+	/* LVDS SS */
+	{ "lvds0", IMX_SC_R_LVDS_0, 1, false, 0 },
+
+	/* DC SS */
+	{ "dc0", IMX_SC_R_DC_0, 1, false, 0 },
+	{ "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, true, 0 },
+
+	/* CM40 SS */
+	{ "cm40-i2c", IMX_SC_R_M4_0_I2C, 1, false, 0 },
+	{ "cm40-intmux", IMX_SC_R_M4_0_INTMUX, 1, false, 0 },
+	{ "cm40-pid", IMX_SC_R_M4_0_PID0, 5, true, 0},
+	{ "cm40-mu-a1", IMX_SC_R_M4_0_MU_1A, 1, false, 0},
+	{ "cm40-lpuart", IMX_SC_R_M4_0_UART, 1, false, 0},
+
+	/* CM41 SS */
+	{ "cm41-i2c", IMX_SC_R_M4_1_I2C, 1, false, 0 },
+	{ "cm41-intmux", IMX_SC_R_M4_1_INTMUX, 1, false, 0 },
+	{ "cm41-pid", IMX_SC_R_M4_1_PID0, 5, true, 0},
+	{ "cm41-mu-a1", IMX_SC_R_M4_1_MU_1A, 1, false, 0},
+	{ "cm41-lpuart", IMX_SC_R_M4_1_UART, 1, false, 0},
+};
+
+static const struct imx_sc_pd_soc imx8qxp_scu_pd = {
+	.pd_ranges = imx8qxp_scu_pd_ranges,
+	.num_ranges = ARRAY_SIZE(imx8qxp_scu_pd_ranges),
+};
+
+static struct imx_sc_ipc *pm_ipc_handle;
+
+static inline struct imx_sc_pm_domain *
+to_imx_sc_pd(struct generic_pm_domain *genpd)
+{
+	return container_of(genpd, struct imx_sc_pm_domain, pd);
+}
+
+static int imx_sc_pd_power(struct generic_pm_domain *domain, bool power_on)
+{
+	struct imx_sc_msg_req_set_resource_power_mode msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	struct imx_sc_pm_domain *pd;
+	int ret;
+
+	pd = to_imx_sc_pd(domain);
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE;
+	hdr->size = 2;
+
+	msg.resource = pd->rsrc;
+	msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : IMX_SC_PM_PW_MODE_LP;
+
+	ret = imx_scu_call_rpc(pm_ipc_handle, &msg, true);
+	if (ret)
+		dev_err(&domain->dev, "failed to power %s resource %d ret %d\n",
+			power_on ? "up" : "off", pd->rsrc, ret);
+
+	return ret;
+}
+
+static int imx_sc_pd_power_on(struct generic_pm_domain *domain)
+{
+	return imx_sc_pd_power(domain, true);
+}
+
+static int imx_sc_pd_power_off(struct generic_pm_domain *domain)
+{
+	return imx_sc_pd_power(domain, false);
+}
+
+static struct generic_pm_domain *imx_scu_pd_xlate(struct of_phandle_args *spec,
+						  void *data)
+{
+	struct generic_pm_domain *domain = ERR_PTR(-ENOENT);
+	struct genpd_onecell_data *pd_data = data;
+	unsigned int i;
+
+	for (i = 0; i < pd_data->num_domains; i++) {
+		struct imx_sc_pm_domain *sc_pd;
+
+		sc_pd = to_imx_sc_pd(pd_data->domains[i]);
+		if (sc_pd->rsrc == spec->args[0]) {
+			domain = &sc_pd->pd;
+			break;
+		}
+	}
+
+	return domain;
+}
+
+static struct imx_sc_pm_domain *
+imx_scu_add_pm_domain(struct device *dev, int idx,
+		      const struct imx_sc_pd_range *pd_ranges)
+{
+	struct imx_sc_pm_domain *sc_pd;
+	int ret;
+
+	if (!imx_sc_rm_is_resource_owned(pm_ipc_handle, pd_ranges->rsrc + idx))
+		return NULL;
+
+	sc_pd = devm_kzalloc(dev, sizeof(*sc_pd), GFP_KERNEL);
+	if (!sc_pd)
+		return ERR_PTR(-ENOMEM);
+
+	sc_pd->rsrc = pd_ranges->rsrc + idx;
+	sc_pd->pd.power_off = imx_sc_pd_power_off;
+	sc_pd->pd.power_on = imx_sc_pd_power_on;
+
+	if (pd_ranges->postfix)
+		snprintf(sc_pd->name, sizeof(sc_pd->name),
+			 "%s%i", pd_ranges->name, pd_ranges->start_from + idx);
+	else
+		snprintf(sc_pd->name, sizeof(sc_pd->name),
+			 "%s", pd_ranges->name);
+
+	sc_pd->pd.name = sc_pd->name;
+
+	if (sc_pd->rsrc >= IMX_SC_R_LAST) {
+		dev_warn(dev, "invalid pd %s rsrc id %d found",
+			 sc_pd->name, sc_pd->rsrc);
+
+		devm_kfree(dev, sc_pd);
+		return NULL;
+	}
+
+	ret = pm_genpd_init(&sc_pd->pd, NULL, true);
+	if (ret) {
+		dev_warn(dev, "failed to init pd %s rsrc id %d",
+			 sc_pd->name, sc_pd->rsrc);
+		devm_kfree(dev, sc_pd);
+		return NULL;
+	}
+
+	return sc_pd;
+}
+
+static int imx_scu_init_pm_domains(struct device *dev,
+				    const struct imx_sc_pd_soc *pd_soc)
+{
+	const struct imx_sc_pd_range *pd_ranges = pd_soc->pd_ranges;
+	struct generic_pm_domain **domains;
+	struct genpd_onecell_data *pd_data;
+	struct imx_sc_pm_domain *sc_pd;
+	u32 count = 0;
+	int i, j;
+
+	for (i = 0; i < pd_soc->num_ranges; i++)
+		count += pd_ranges[i].num;
+
+	domains = devm_kcalloc(dev, count, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	pd_data = devm_kzalloc(dev, sizeof(*pd_data), GFP_KERNEL);
+	if (!pd_data)
+		return -ENOMEM;
+
+	count = 0;
+	for (i = 0; i < pd_soc->num_ranges; i++) {
+		for (j = 0; j < pd_ranges[i].num; j++) {
+			sc_pd = imx_scu_add_pm_domain(dev, j, &pd_ranges[i]);
+			if (IS_ERR_OR_NULL(sc_pd))
+				continue;
+
+			domains[count++] = &sc_pd->pd;
+			dev_dbg(dev, "added power domain %s\n", sc_pd->pd.name);
+		}
+	}
+
+	pd_data->domains = domains;
+	pd_data->num_domains = count;
+	pd_data->xlate = imx_scu_pd_xlate;
+
+	of_genpd_add_provider_onecell(dev->of_node, pd_data);
+
+	return 0;
+}
+
+static int imx_sc_pd_probe(struct platform_device *pdev)
+{
+	const struct imx_sc_pd_soc *pd_soc;
+	int ret;
+
+	ret = imx_scu_get_handle(&pm_ipc_handle);
+	if (ret)
+		return ret;
+
+	pd_soc = of_device_get_match_data(&pdev->dev);
+	if (!pd_soc)
+		return -ENODEV;
+
+	return imx_scu_init_pm_domains(&pdev->dev, pd_soc);
+}
+
+static const struct of_device_id imx_sc_pd_match[] = {
+	{ .compatible = "fsl,imx8qxp-scu-pd", &imx8qxp_scu_pd},
+	{ .compatible = "fsl,scu-pd", &imx8qxp_scu_pd},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx_sc_pd_driver = {
+	.driver = {
+		.name = "imx-scu-pd",
+		.of_match_table = imx_sc_pd_match,
+	},
+	.probe = imx_sc_pd_probe,
+};
+builtin_platform_driver(imx_sc_pd_driver);
+
+MODULE_AUTHOR("Dong Aisheng <aisheng.dong@nxp.com>");
+MODULE_DESCRIPTION("IMX SCU Power Domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
new file mode 100644
index 000000000..7127a04bc
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft.c
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright 2007-2010 Red Hat, Inc.
+ *  by Peter Jones <pjones@redhat.com>
+ *  Copyright 2008 IBM, Inc.
+ *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *  Copyright 2008
+ *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *
+ * This code exposes the iSCSI Boot Format Table to userland via sysfs.
+ *
+ * Changelog:
+ *
+ *  06 Jan 2010 - Peter Jones <pjones@redhat.com>
+ *    New changelog entries are in the git log from now on.  Not here.
+ *
+ *  14 Mar 2008 - Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *    Updated comments and copyrights. (v0.4.9)
+ *
+ *  11 Feb 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *    Converted to using ibft_addr. (v0.4.8)
+ *
+ *   8 Feb 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *    Combined two functions in one: reserve_ibft_region. (v0.4.7)
+ *
+ *  30 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added logic to handle IPv6 addresses. (v0.4.6)
+ *
+ *  25 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added logic to handle badly not-to-spec iBFT. (v0.4.5)
+ *
+ *   4 Jan 2008 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added __init to function declarations. (v0.4.4)
+ *
+ *  21 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Updated kobject registration, combined unregister functions in one
+ *   and code and style cleanup. (v0.4.3)
+ *
+ *   5 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added end-markers to enums and re-organized kobject registration. (v0.4.2)
+ *
+ *   4 Dec 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Created 'device' sysfs link to the NIC and style cleanup. (v0.4.1)
+ *
+ *  28 Nov 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added sysfs-ibft documentation, moved 'find_ibft' function to
+ *   in its own file and added text attributes for every struct field.  (v0.4)
+ *
+ *  21 Nov 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added text attributes emulating OpenFirmware /proc/device-tree naming.
+ *   Removed binary /sysfs interface (v0.3)
+ *
+ *  29 Aug 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   Added functionality in setup.c to reserve iBFT region. (v0.2)
+ *
+ *  27 Aug 2007 - Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *   First version exposing iBFT data via a binary /sysfs. (v0.1)
+ */
+
+
+#include <linux/blkdev.h>
+#include <linux/capability.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/iscsi_ibft.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_boot_sysfs.h>
+
+#define IBFT_ISCSI_VERSION "0.5.0"
+#define IBFT_ISCSI_DATE "2010-Feb-25"
+
+MODULE_AUTHOR("Peter Jones <pjones@redhat.com> and "
+	      "Konrad Rzeszutek <ketuzsezr@darnok.org>");
+MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(IBFT_ISCSI_VERSION);
+
+#ifndef CONFIG_ISCSI_IBFT_FIND
+struct acpi_table_ibft *ibft_addr;
+#endif
+
+struct ibft_hdr {
+	u8 id;
+	u8 version;
+	u16 length;
+	u8 index;
+	u8 flags;
+} __attribute__((__packed__));
+
+struct ibft_control {
+	struct ibft_hdr hdr;
+	u16 extensions;
+	u16 initiator_off;
+	u16 nic0_off;
+	u16 tgt0_off;
+	u16 nic1_off;
+	u16 tgt1_off;
+	u16 expansion[];
+} __attribute__((__packed__));
+
+struct ibft_initiator {
+	struct ibft_hdr hdr;
+	char isns_server[16];
+	char slp_server[16];
+	char pri_radius_server[16];
+	char sec_radius_server[16];
+	u16 initiator_name_len;
+	u16 initiator_name_off;
+} __attribute__((__packed__));
+
+struct ibft_nic {
+	struct ibft_hdr hdr;
+	char ip_addr[16];
+	u8 subnet_mask_prefix;
+	u8 origin;
+	char gateway[16];
+	char primary_dns[16];
+	char secondary_dns[16];
+	char dhcp[16];
+	u16 vlan;
+	char mac[6];
+	u16 pci_bdf;
+	u16 hostname_len;
+	u16 hostname_off;
+} __attribute__((__packed__));
+
+struct ibft_tgt {
+	struct ibft_hdr hdr;
+	char ip_addr[16];
+	u16 port;
+	char lun[8];
+	u8 chap_type;
+	u8 nic_assoc;
+	u16 tgt_name_len;
+	u16 tgt_name_off;
+	u16 chap_name_len;
+	u16 chap_name_off;
+	u16 chap_secret_len;
+	u16 chap_secret_off;
+	u16 rev_chap_name_len;
+	u16 rev_chap_name_off;
+	u16 rev_chap_secret_len;
+	u16 rev_chap_secret_off;
+} __attribute__((__packed__));
+
+/*
+ * The kobject different types and its names.
+ *
+*/
+enum ibft_id {
+	id_reserved = 0, /* We don't support. */
+	id_control = 1, /* Should show up only once and is not exported. */
+	id_initiator = 2,
+	id_nic = 3,
+	id_target = 4,
+	id_extensions = 5, /* We don't support. */
+	id_end_marker,
+};
+
+/*
+ * The kobject and attribute structures.
+ */
+
+struct ibft_kobject {
+	struct acpi_table_ibft *header;
+	union {
+		struct ibft_initiator *initiator;
+		struct ibft_nic *nic;
+		struct ibft_tgt *tgt;
+		struct ibft_hdr *hdr;
+	};
+};
+
+static struct iscsi_boot_kset *boot_kset;
+
+/* fully null address */
+static const char nulls[16];
+
+/* IPv4-mapped IPv6 ::ffff:0.0.0.0 */
+static const char mapped_nulls[16] = { 0x00, 0x00, 0x00, 0x00,
+                                       0x00, 0x00, 0x00, 0x00,
+                                       0x00, 0x00, 0xff, 0xff,
+                                       0x00, 0x00, 0x00, 0x00 };
+
+static int address_not_null(u8 *ip)
+{
+	return (memcmp(ip, nulls, 16) && memcmp(ip, mapped_nulls, 16));
+}
+
+/*
+ * Helper functions to parse data properly.
+ */
+static ssize_t sprintf_ipaddr(char *buf, u8 *ip)
+{
+	char *str = buf;
+
+	if (ip[0] == 0 && ip[1] == 0 && ip[2] == 0 && ip[3] == 0 &&
+	    ip[4] == 0 && ip[5] == 0 && ip[6] == 0 && ip[7] == 0 &&
+	    ip[8] == 0 && ip[9] == 0 && ip[10] == 0xff && ip[11] == 0xff) {
+		/*
+		 * IPV4
+		 */
+		str += sprintf(buf, "%pI4", ip + 12);
+	} else {
+		/*
+		 * IPv6
+		 */
+		str += sprintf(str, "%pI6", ip);
+	}
+	str += sprintf(str, "\n");
+	return str - buf;
+}
+
+static ssize_t sprintf_string(char *str, int len, char *buf)
+{
+	return sprintf(str, "%.*s\n", len, buf);
+}
+
+/*
+ * Helper function to verify the IBFT header.
+ */
+static int ibft_verify_hdr(char *t, struct ibft_hdr *hdr, int id, int length)
+{
+	if (hdr->id != id) {
+		printk(KERN_ERR "iBFT error: We expected the %s " \
+				"field header.id to have %d but " \
+				"found %d instead!\n", t, id, hdr->id);
+		return -ENODEV;
+	}
+	if (length && hdr->length != length) {
+		printk(KERN_ERR "iBFT error: We expected the %s " \
+				"field header.length to have %d but " \
+				"found %d instead!\n", t, length, hdr->length);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/*
+ *  Routines for parsing the iBFT data to be human readable.
+ */
+static ssize_t ibft_attr_show_initiator(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_initiator *initiator = entry->initiator;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+
+	if (!initiator)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
+		str += sprintf(str, "%d\n", initiator->hdr.index);
+		break;
+	case ISCSI_BOOT_INI_FLAGS:
+		str += sprintf(str, "%d\n", initiator->hdr.flags);
+		break;
+	case ISCSI_BOOT_INI_ISNS_SERVER:
+		str += sprintf_ipaddr(str, initiator->isns_server);
+		break;
+	case ISCSI_BOOT_INI_SLP_SERVER:
+		str += sprintf_ipaddr(str, initiator->slp_server);
+		break;
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
+		str += sprintf_ipaddr(str, initiator->pri_radius_server);
+		break;
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
+		str += sprintf_ipaddr(str, initiator->sec_radius_server);
+		break;
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		str += sprintf_string(str, initiator->initiator_name_len,
+				      (char *)ibft_loc +
+				      initiator->initiator_name_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+}
+
+static ssize_t ibft_attr_show_nic(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_nic *nic = entry->nic;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+	__be32 val;
+
+	if (!nic)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
+		str += sprintf(str, "%d\n", nic->hdr.index);
+		break;
+	case ISCSI_BOOT_ETH_FLAGS:
+		str += sprintf(str, "%d\n", nic->hdr.flags);
+		break;
+	case ISCSI_BOOT_ETH_IP_ADDR:
+		str += sprintf_ipaddr(str, nic->ip_addr);
+		break;
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
+		val = cpu_to_be32(~((1 << (32-nic->subnet_mask_prefix))-1));
+		str += sprintf(str, "%pI4", &val);
+		break;
+	case ISCSI_BOOT_ETH_PREFIX_LEN:
+		str += sprintf(str, "%d\n", nic->subnet_mask_prefix);
+		break;
+	case ISCSI_BOOT_ETH_ORIGIN:
+		str += sprintf(str, "%d\n", nic->origin);
+		break;
+	case ISCSI_BOOT_ETH_GATEWAY:
+		str += sprintf_ipaddr(str, nic->gateway);
+		break;
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
+		str += sprintf_ipaddr(str, nic->primary_dns);
+		break;
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
+		str += sprintf_ipaddr(str, nic->secondary_dns);
+		break;
+	case ISCSI_BOOT_ETH_DHCP:
+		str += sprintf_ipaddr(str, nic->dhcp);
+		break;
+	case ISCSI_BOOT_ETH_VLAN:
+		str += sprintf(str, "%d\n", nic->vlan);
+		break;
+	case ISCSI_BOOT_ETH_MAC:
+		str += sprintf(str, "%pM\n", nic->mac);
+		break;
+	case ISCSI_BOOT_ETH_HOSTNAME:
+		str += sprintf_string(str, nic->hostname_len,
+				      (char *)ibft_loc + nic->hostname_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+};
+
+static ssize_t ibft_attr_show_target(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_tgt *tgt = entry->tgt;
+	void *ibft_loc = entry->header;
+	char *str = buf;
+	int i;
+
+	if (!tgt)
+		return 0;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
+		str += sprintf(str, "%d\n", tgt->hdr.index);
+		break;
+	case ISCSI_BOOT_TGT_FLAGS:
+		str += sprintf(str, "%d\n", tgt->hdr.flags);
+		break;
+	case ISCSI_BOOT_TGT_IP_ADDR:
+		str += sprintf_ipaddr(str, tgt->ip_addr);
+		break;
+	case ISCSI_BOOT_TGT_PORT:
+		str += sprintf(str, "%d\n", tgt->port);
+		break;
+	case ISCSI_BOOT_TGT_LUN:
+		for (i = 0; i < 8; i++)
+			str += sprintf(str, "%x", (u8)tgt->lun[i]);
+		str += sprintf(str, "\n");
+		break;
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+		str += sprintf(str, "%d\n", tgt->nic_assoc);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
+		str += sprintf(str, "%d\n", tgt->chap_type);
+		break;
+	case ISCSI_BOOT_TGT_NAME:
+		str += sprintf_string(str, tgt->tgt_name_len,
+				      (char *)ibft_loc + tgt->tgt_name_off);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+		str += sprintf_string(str, tgt->chap_name_len,
+				      (char *)ibft_loc + tgt->chap_name_off);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		str += sprintf_string(str, tgt->chap_secret_len,
+				      (char *)ibft_loc + tgt->chap_secret_off);
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+		str += sprintf_string(str, tgt->rev_chap_name_len,
+				      (char *)ibft_loc +
+				      tgt->rev_chap_name_off);
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+		str += sprintf_string(str, tgt->rev_chap_secret_len,
+				      (char *)ibft_loc +
+				      tgt->rev_chap_secret_off);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+}
+
+static ssize_t ibft_attr_show_acpitbl(void *data, int type, char *buf)
+{
+	struct ibft_kobject *entry = data;
+	char *str = buf;
+
+	switch (type) {
+	case ISCSI_BOOT_ACPITBL_SIGNATURE:
+		str += sprintf_string(str, ACPI_NAMESEG_SIZE,
+				      entry->header->header.signature);
+		break;
+	case ISCSI_BOOT_ACPITBL_OEM_ID:
+		str += sprintf_string(str, ACPI_OEM_ID_SIZE,
+				      entry->header->header.oem_id);
+		break;
+	case ISCSI_BOOT_ACPITBL_OEM_TABLE_ID:
+		str += sprintf_string(str, ACPI_OEM_TABLE_ID_SIZE,
+				      entry->header->header.oem_table_id);
+		break;
+	default:
+		break;
+	}
+
+	return str - buf;
+}
+
+static int __init ibft_check_device(void)
+{
+	int len;
+	u8 *pos;
+	u8 csum = 0;
+
+	len = ibft_addr->header.length;
+
+	/* Sanity checking of iBFT. */
+	if (ibft_addr->header.revision != 1) {
+		printk(KERN_ERR "iBFT module supports only revision 1, " \
+				"while this is %d.\n",
+				ibft_addr->header.revision);
+		return -ENOENT;
+	}
+	for (pos = (u8 *)ibft_addr; pos < (u8 *)ibft_addr + len; pos++)
+		csum += *pos;
+
+	if (csum) {
+		printk(KERN_ERR "iBFT has incorrect checksum (0x%x)!\n", csum);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+/*
+ * Helper routiners to check to determine if the entry is valid
+ * in the proper iBFT structure.
+ */
+static umode_t ibft_check_nic_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_nic *nic = entry->nic;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_INDEX:
+	case ISCSI_BOOT_ETH_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_IP_ADDR:
+		if (address_not_null(nic->ip_addr))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_PREFIX_LEN:
+	case ISCSI_BOOT_ETH_SUBNET_MASK:
+		if (nic->subnet_mask_prefix)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_ORIGIN:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_GATEWAY:
+		if (address_not_null(nic->gateway))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_PRIMARY_DNS:
+		if (address_not_null(nic->primary_dns))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_SECONDARY_DNS:
+		if (address_not_null(nic->secondary_dns))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_DHCP:
+		if (address_not_null(nic->dhcp))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_VLAN:
+	case ISCSI_BOOT_ETH_MAC:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_ETH_HOSTNAME:
+		if (nic->hostname_off)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t __init ibft_check_tgt_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_tgt *tgt = entry->tgt;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_INDEX:
+	case ISCSI_BOOT_TGT_FLAGS:
+	case ISCSI_BOOT_TGT_IP_ADDR:
+	case ISCSI_BOOT_TGT_PORT:
+	case ISCSI_BOOT_TGT_LUN:
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+	case ISCSI_BOOT_TGT_CHAP_TYPE:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_NAME:
+		if (tgt->tgt_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		if (tgt->chap_name_len)
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+		if (tgt->rev_chap_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t __init ibft_check_initiator_for(void *data, int type)
+{
+	struct ibft_kobject *entry = data;
+	struct ibft_initiator *init = entry->initiator;
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INDEX:
+	case ISCSI_BOOT_INI_FLAGS:
+		rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_ISNS_SERVER:
+		if (address_not_null(init->isns_server))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SLP_SERVER:
+		if (address_not_null(init->slp_server))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_PRI_RADIUS_SERVER:
+		if (address_not_null(init->pri_radius_server))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_SEC_RADIUS_SERVER:
+		if (address_not_null(init->sec_radius_server))
+			rc = S_IRUGO;
+		break;
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		if (init->initiator_name_len)
+			rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t __init ibft_check_acpitbl_for(void *data, int type)
+{
+
+	umode_t rc = 0;
+
+	switch (type) {
+	case ISCSI_BOOT_ACPITBL_SIGNATURE:
+	case ISCSI_BOOT_ACPITBL_OEM_ID:
+	case ISCSI_BOOT_ACPITBL_OEM_TABLE_ID:
+		rc = S_IRUGO;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static void ibft_kobj_release(void *data)
+{
+	kfree(data);
+}
+
+/*
+ * Helper function for ibft_register_kobjects.
+ */
+static int __init ibft_create_kobject(struct acpi_table_ibft *header,
+				      struct ibft_hdr *hdr)
+{
+	struct iscsi_boot_kobj *boot_kobj = NULL;
+	struct ibft_kobject *ibft_kobj = NULL;
+	struct ibft_nic *nic = (struct ibft_nic *)hdr;
+	struct pci_dev *pci_dev;
+	int rc = 0;
+
+	ibft_kobj = kzalloc(sizeof(*ibft_kobj), GFP_KERNEL);
+	if (!ibft_kobj)
+		return -ENOMEM;
+
+	ibft_kobj->header = header;
+	ibft_kobj->hdr = hdr;
+
+	switch (hdr->id) {
+	case id_initiator:
+		rc = ibft_verify_hdr("initiator", hdr, id_initiator,
+				     sizeof(*ibft_kobj->initiator));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_initiator(boot_kset, hdr->index,
+						ibft_kobj,
+						ibft_attr_show_initiator,
+						ibft_check_initiator_for,
+						ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_nic:
+		rc = ibft_verify_hdr("ethernet", hdr, id_nic,
+				     sizeof(*ibft_kobj->nic));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_ethernet(boot_kset, hdr->index,
+						       ibft_kobj,
+						       ibft_attr_show_nic,
+						       ibft_check_nic_for,
+						       ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_target:
+		rc = ibft_verify_hdr("target", hdr, id_target,
+				     sizeof(*ibft_kobj->tgt));
+		if (rc)
+			break;
+
+		boot_kobj = iscsi_boot_create_target(boot_kset, hdr->index,
+						     ibft_kobj,
+						     ibft_attr_show_target,
+						     ibft_check_tgt_for,
+						     ibft_kobj_release);
+		if (!boot_kobj) {
+			rc = -ENOMEM;
+			goto free_ibft_obj;
+		}
+		break;
+	case id_reserved:
+	case id_control:
+	case id_extensions:
+		/* Fields which we don't support. Ignore them */
+		rc = 1;
+		break;
+	default:
+		printk(KERN_ERR "iBFT has unknown structure type (%d). " \
+				"Report this bug to %.6s!\n", hdr->id,
+				header->header.oem_id);
+		rc = 1;
+		break;
+	}
+
+	if (rc) {
+		/* Skip adding this kobject, but exit with non-fatal error. */
+		rc = 0;
+		goto free_ibft_obj;
+	}
+
+	if (hdr->id == id_nic) {
+		/*
+		* We don't search for the device in other domains than
+		* zero. This is because on x86 platforms the BIOS
+		* executes only devices which are in domain 0. Furthermore, the
+		* iBFT spec doesn't have a domain id field :-(
+		*/
+		pci_dev = pci_get_domain_bus_and_slot(0,
+						(nic->pci_bdf & 0xff00) >> 8,
+						(nic->pci_bdf & 0xff));
+		if (pci_dev) {
+			rc = sysfs_create_link(&boot_kobj->kobj,
+					       &pci_dev->dev.kobj, "device");
+			pci_dev_put(pci_dev);
+		}
+	}
+	return 0;
+
+free_ibft_obj:
+	kfree(ibft_kobj);
+	return rc;
+}
+
+/*
+ * Scan the IBFT table structure for the NIC and Target fields. When
+ * found add them on the passed-in list. We do not support the other
+ * fields at this point, so they are skipped.
+ */
+static int __init ibft_register_kobjects(struct acpi_table_ibft *header)
+{
+	struct ibft_control *control = NULL;
+	struct iscsi_boot_kobj *boot_kobj;
+	struct ibft_kobject *ibft_kobj;
+	void *ptr, *end;
+	int rc = 0;
+	u16 offset;
+	u16 eot_offset;
+
+	control = (void *)header + sizeof(*header);
+	end = (void *)control + control->hdr.length;
+	eot_offset = (void *)header + header->header.length - (void *)control;
+	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control, 0);
+
+	/* iBFT table safety checking */
+	rc |= ((control->hdr.index) ? -ENODEV : 0);
+	rc |= ((control->hdr.length < sizeof(*control)) ? -ENODEV : 0);
+	if (rc) {
+		printk(KERN_ERR "iBFT error: Control header is invalid!\n");
+		return rc;
+	}
+	for (ptr = &control->initiator_off; ptr + sizeof(u16) <= end; ptr += sizeof(u16)) {
+		offset = *(u16 *)ptr;
+		if (offset && offset < header->header.length &&
+						offset < eot_offset) {
+			rc = ibft_create_kobject(header,
+						 (void *)header + offset);
+			if (rc)
+				break;
+		}
+	}
+	if (rc)
+		return rc;
+
+	ibft_kobj = kzalloc(sizeof(*ibft_kobj), GFP_KERNEL);
+	if (!ibft_kobj)
+		return -ENOMEM;
+
+	ibft_kobj->header = header;
+	ibft_kobj->hdr = NULL; /*for ibft_unregister*/
+
+	boot_kobj = iscsi_boot_create_acpitbl(boot_kset, 0,
+					ibft_kobj,
+					ibft_attr_show_acpitbl,
+					ibft_check_acpitbl_for,
+					ibft_kobj_release);
+	if (!boot_kobj)  {
+		kfree(ibft_kobj);
+		rc = -ENOMEM;
+	}
+
+	return rc;
+}
+
+static void ibft_unregister(void)
+{
+	struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+	struct ibft_kobject *ibft_kobj;
+
+	list_for_each_entry_safe(boot_kobj, tmp_kobj,
+				 &boot_kset->kobj_list, list) {
+		ibft_kobj = boot_kobj->data;
+		if (ibft_kobj->hdr && ibft_kobj->hdr->id == id_nic)
+			sysfs_remove_link(&boot_kobj->kobj, "device");
+	};
+}
+
+static void ibft_cleanup(void)
+{
+	if (boot_kset) {
+		ibft_unregister();
+		iscsi_boot_destroy_kset(boot_kset);
+	}
+}
+
+static void __exit ibft_exit(void)
+{
+	ibft_cleanup();
+}
+
+#ifdef CONFIG_ACPI
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+	{ "iBFT" },
+	{ "BIFT" },	/* Broadcom iSCSI Offload */
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+	int i;
+	struct acpi_table_header *table = NULL;
+
+	if (acpi_disabled)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+		acpi_get_table(ibft_signs[i].sign, 0, &table);
+		ibft_addr = (struct acpi_table_ibft *)table;
+	}
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
+/*
+ * ibft_init() - creates sysfs tree entries for the iBFT data.
+ */
+static int __init ibft_init(void)
+{
+	int rc = 0;
+
+	/*
+	   As on UEFI systems the setup_arch()/find_ibft_region()
+	   is called before ACPI tables are parsed and it only does
+	   legacy finding.
+	*/
+	if (!ibft_addr)
+		acpi_find_ibft_region();
+
+	if (ibft_addr) {
+		pr_info("iBFT detected.\n");
+
+		rc = ibft_check_device();
+		if (rc)
+			return rc;
+
+		boot_kset = iscsi_boot_create_kset("ibft");
+		if (!boot_kset)
+			return -ENOMEM;
+
+		/* Scan the IBFT for data and register the kobjects. */
+		rc = ibft_register_kobjects(ibft_addr);
+		if (rc)
+			goto out_free;
+	} else
+		printk(KERN_INFO "No iBFT detected.\n");
+
+	return 0;
+
+out_free:
+	ibft_cleanup();
+	return rc;
+}
+
+module_init(ibft_init);
+module_exit(ibft_exit);
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
new file mode 100644
index 000000000..64bb94523
--- /dev/null
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright 2007-2010 Red Hat, Inc.
+ *  by Peter Jones <pjones@redhat.com>
+ *  Copyright 2007 IBM, Inc.
+ *  by Konrad Rzeszutek <konradr@linux.vnet.ibm.com>
+ *  Copyright 2008
+ *  by Konrad Rzeszutek <ketuzsezr@darnok.org>
+ *
+ * This code finds the iSCSI Boot Format Table.
+ */
+
+#include <linux/memblock.h>
+#include <linux/blkdev.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/stat.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/iscsi_ibft.h>
+
+#include <asm/mmzone.h>
+
+/*
+ * Physical location of iSCSI Boot Format Table.
+ */
+struct acpi_table_ibft *ibft_addr;
+EXPORT_SYMBOL_GPL(ibft_addr);
+
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	{ "iBFT" },
+	{ "BIFT" },	/* Broadcom iSCSI Offload */
+};
+
+#define IBFT_SIGN_LEN 4
+#define IBFT_START 0x80000 /* 512kB */
+#define IBFT_END 0x100000 /* 1MB */
+#define VGA_MEM 0xA0000 /* VGA buffer */
+#define VGA_SIZE 0x20000 /* 128kB */
+
+static int __init find_ibft_in_mem(void)
+{
+	unsigned long pos;
+	unsigned int len = 0;
+	void *virt;
+	int i;
+
+	for (pos = IBFT_START; pos < IBFT_END; pos += 16) {
+		/* The table can't be inside the VGA BIOS reserved space,
+		 * so skip that area */
+		if (pos == VGA_MEM)
+			pos += VGA_SIZE;
+		virt = isa_bus_to_virt(pos);
+
+		for (i = 0; i < ARRAY_SIZE(ibft_signs); i++) {
+			if (memcmp(virt, ibft_signs[i].sign, IBFT_SIGN_LEN) ==
+			    0) {
+				unsigned long *addr =
+				    (unsigned long *)isa_bus_to_virt(pos + 4);
+				len = *addr;
+				/* if the length of the table extends past 1M,
+				 * the table cannot be valid. */
+				if (pos + len <= (IBFT_END-1)) {
+					ibft_addr = (struct acpi_table_ibft *)virt;
+					pr_info("iBFT found at 0x%lx.\n", pos);
+					goto done;
+				}
+			}
+		}
+	}
+done:
+	return len;
+}
+/*
+ * Routine used to find the iSCSI Boot Format Table. The logical
+ * kernel address is set in the ibft_addr global variable.
+ */
+unsigned long __init find_ibft_region(unsigned long *sizep)
+{
+	ibft_addr = NULL;
+
+	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
+	 * only use ACPI for this */
+
+	if (!efi_enabled(EFI_BOOT))
+		find_ibft_in_mem();
+
+	if (ibft_addr) {
+		*sizep = PAGE_ALIGN(ibft_addr->header.length);
+		return (u64)virt_to_phys(ibft_addr);
+	}
+
+	*sizep = 0;
+	return 0;
+}
diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c
new file mode 100644
index 000000000..24945e2da
--- /dev/null
+++ b/drivers/firmware/memmap.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/firmware/memmap.c
+ *  Copyright (C) 2008 SUSE LINUX Products GmbH
+ *  by Bernhard Walle <bernhard.walle@gmx.de>
+ */
+
+#include <linux/string.h>
+#include <linux/firmware-map.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/memblock.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+
+/*
+ * Data types ------------------------------------------------------------------
+ */
+
+/*
+ * Firmware map entry. Because firmware memory maps are flat and not
+ * hierarchical, it's ok to organise them in a linked list. No parent
+ * information is necessary as for the resource tree.
+ */
+struct firmware_map_entry {
+	/*
+	 * start and end must be u64 rather than resource_size_t, because e820
+	 * resources can lie at addresses above 4G.
+	 */
+	u64			start;	/* start of the memory range */
+	u64			end;	/* end of the memory range (incl.) */
+	const char		*type;	/* type of the memory range */
+	struct list_head	list;	/* entry for the linked list */
+	struct kobject		kobj;   /* kobject for each entry */
+};
+
+/*
+ * Forward declarations --------------------------------------------------------
+ */
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf);
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf);
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf);
+
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry(u64 start, u64 end, const char *type);
+
+/*
+ * Static data -----------------------------------------------------------------
+ */
+
+struct memmap_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct firmware_map_entry *entry, char *buf);
+};
+
+static struct memmap_attribute memmap_start_attr = __ATTR_RO(start);
+static struct memmap_attribute memmap_end_attr   = __ATTR_RO(end);
+static struct memmap_attribute memmap_type_attr  = __ATTR_RO(type);
+
+/*
+ * These are default attributes that are added for every memmap entry.
+ */
+static struct attribute *def_attrs[] = {
+	&memmap_start_attr.attr,
+	&memmap_end_attr.attr,
+	&memmap_type_attr.attr,
+	NULL
+};
+
+static const struct sysfs_ops memmap_attr_ops = {
+	.show = memmap_attr_show,
+};
+
+/* Firmware memory map entries. */
+static LIST_HEAD(map_entries);
+static DEFINE_SPINLOCK(map_entries_lock);
+
+/*
+ * For memory hotplug, there is no way to free memory map entries allocated
+ * by boot mem after the system is up. So when we hot-remove memory whose
+ * map entry is allocated by bootmem, we need to remember the storage and
+ * reuse it when the memory is hot-added again.
+ */
+static LIST_HEAD(map_entries_bootmem);
+static DEFINE_SPINLOCK(map_entries_bootmem_lock);
+
+
+static inline struct firmware_map_entry *
+to_memmap_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct firmware_map_entry, kobj);
+}
+
+static void __meminit release_firmware_map_entry(struct kobject *kobj)
+{
+	struct firmware_map_entry *entry = to_memmap_entry(kobj);
+
+	if (PageReserved(virt_to_page(entry))) {
+		/*
+		 * Remember the storage allocated by bootmem, and reuse it when
+		 * the memory is hot-added again. The entry will be added to
+		 * map_entries_bootmem here, and deleted from &map_entries in
+		 * firmware_map_remove_entry().
+		 */
+		spin_lock(&map_entries_bootmem_lock);
+		list_add(&entry->list, &map_entries_bootmem);
+		spin_unlock(&map_entries_bootmem_lock);
+
+		return;
+	}
+
+	kfree(entry);
+}
+
+static struct kobj_type __refdata memmap_ktype = {
+	.release	= release_firmware_map_entry,
+	.sysfs_ops	= &memmap_attr_ops,
+	.default_attrs	= def_attrs,
+};
+
+/*
+ * Registration functions ------------------------------------------------------
+ */
+
+/**
+ * firmware_map_add_entry() - Does the real work to add a firmware memmap entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ * @entry: Pre-allocated (either kmalloc() or bootmem allocator), uninitialised
+ *         entry.
+ *
+ * Common implementation of firmware_map_add() and firmware_map_add_early()
+ * which expects a pre-allocated struct firmware_map_entry.
+ *
+ * Return: 0 always
+ */
+static int firmware_map_add_entry(u64 start, u64 end,
+				  const char *type,
+				  struct firmware_map_entry *entry)
+{
+	BUG_ON(start > end);
+
+	entry->start = start;
+	entry->end = end - 1;
+	entry->type = type;
+	INIT_LIST_HEAD(&entry->list);
+	kobject_init(&entry->kobj, &memmap_ktype);
+
+	spin_lock(&map_entries_lock);
+	list_add_tail(&entry->list, &map_entries);
+	spin_unlock(&map_entries_lock);
+
+	return 0;
+}
+
+/**
+ * firmware_map_remove_entry() - Does the real work to remove a firmware
+ * memmap entry.
+ * @entry: removed entry.
+ *
+ * The caller must hold map_entries_lock, and release it properly.
+ */
+static inline void firmware_map_remove_entry(struct firmware_map_entry *entry)
+{
+	list_del(&entry->list);
+}
+
+/*
+ * Add memmap entry on sysfs
+ */
+static int add_sysfs_fw_map_entry(struct firmware_map_entry *entry)
+{
+	static int map_entries_nr;
+	static struct kset *mmap_kset;
+
+	if (entry->kobj.state_in_sysfs)
+		return -EEXIST;
+
+	if (!mmap_kset) {
+		mmap_kset = kset_create_and_add("memmap", NULL, firmware_kobj);
+		if (!mmap_kset)
+			return -ENOMEM;
+	}
+
+	entry->kobj.kset = mmap_kset;
+	if (kobject_add(&entry->kobj, NULL, "%d", map_entries_nr++))
+		kobject_put(&entry->kobj);
+
+	return 0;
+}
+
+/*
+ * Remove memmap entry on sysfs
+ */
+static inline void remove_sysfs_fw_map_entry(struct firmware_map_entry *entry)
+{
+	kobject_put(&entry->kobj);
+}
+
+/**
+ * firmware_map_find_entry_in_list() - Search memmap entry in a given list.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ * @list:  In which to find the entry.
+ *
+ * This function is to find the memmap entey of a given memory range in a
+ * given list. The caller must hold map_entries_lock, and must not release
+ * the lock until the processing of the returned entry has completed.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry_in_list(u64 start, u64 end, const char *type,
+				struct list_head *list)
+{
+	struct firmware_map_entry *entry;
+
+	list_for_each_entry(entry, list, list)
+		if ((entry->start == start) && (entry->end == end) &&
+		    (!strcmp(entry->type, type))) {
+			return entry;
+		}
+
+	return NULL;
+}
+
+/**
+ * firmware_map_find_entry() - Search memmap entry in map_entries.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function is to find the memmap entey of a given memory range.
+ * The caller must hold map_entries_lock, and must not release the lock
+ * until the processing of the returned entry has completed.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry(u64 start, u64 end, const char *type)
+{
+	return firmware_map_find_entry_in_list(start, end, type, &map_entries);
+}
+
+/**
+ * firmware_map_find_entry_bootmem() - Search memmap entry in map_entries_bootmem.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive).
+ * @type:  Type of the memory range.
+ *
+ * This function is similar to firmware_map_find_entry except that it find the
+ * given entry in map_entries_bootmem.
+ *
+ * Return: Pointer to the entry to be found on success, or NULL on failure.
+ */
+static struct firmware_map_entry * __meminit
+firmware_map_find_entry_bootmem(u64 start, u64 end, const char *type)
+{
+	return firmware_map_find_entry_in_list(start, end, type,
+					       &map_entries_bootmem);
+}
+
+/**
+ * firmware_map_add_hotplug() - Adds a firmware mapping entry when we do
+ * memory hotplug.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range (exclusive)
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function is for memory hotplug, it is
+ * similar to function firmware_map_add_early(). The only difference is that
+ * it will create the syfs entry dynamically.
+ *
+ * Return: 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int __meminit firmware_map_add_hotplug(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = firmware_map_find_entry(start, end - 1, type);
+	if (entry)
+		return 0;
+
+	entry = firmware_map_find_entry_bootmem(start, end - 1, type);
+	if (!entry) {
+		entry = kzalloc(sizeof(struct firmware_map_entry), GFP_ATOMIC);
+		if (!entry)
+			return -ENOMEM;
+	} else {
+		/* Reuse storage allocated by bootmem. */
+		spin_lock(&map_entries_bootmem_lock);
+		list_del(&entry->list);
+		spin_unlock(&map_entries_bootmem_lock);
+
+		memset(entry, 0, sizeof(*entry));
+	}
+
+	firmware_map_add_entry(start, end, type, entry);
+	/* create the memmap entry */
+	add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+
+/**
+ * firmware_map_add_early() - Adds a firmware mapping entry.
+ * @start: Start of the memory range.
+ * @end:   End of the memory range.
+ * @type:  Type of the memory range.
+ *
+ * Adds a firmware mapping entry. This function uses the bootmem allocator
+ * for memory allocation.
+ *
+ * That function must be called before late_initcall.
+ *
+ * Return: 0 on success, or -ENOMEM if no memory could be allocated.
+ */
+int __init firmware_map_add_early(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	entry = memblock_alloc(sizeof(struct firmware_map_entry),
+			       SMP_CACHE_BYTES);
+	if (WARN_ON(!entry))
+		return -ENOMEM;
+
+	return firmware_map_add_entry(start, end, type, entry);
+}
+
+/**
+ * firmware_map_remove() - remove a firmware mapping entry
+ * @start: Start of the memory range.
+ * @end:   End of the memory range.
+ * @type:  Type of the memory range.
+ *
+ * removes a firmware mapping entry.
+ *
+ * Return: 0 on success, or -EINVAL if no entry.
+ */
+int __meminit firmware_map_remove(u64 start, u64 end, const char *type)
+{
+	struct firmware_map_entry *entry;
+
+	spin_lock(&map_entries_lock);
+	entry = firmware_map_find_entry(start, end - 1, type);
+	if (!entry) {
+		spin_unlock(&map_entries_lock);
+		return -EINVAL;
+	}
+
+	firmware_map_remove_entry(entry);
+	spin_unlock(&map_entries_lock);
+
+	/* remove the memmap entry */
+	remove_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+
+/*
+ * Sysfs functions -------------------------------------------------------------
+ */
+
+static ssize_t start_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->start);
+}
+
+static ssize_t end_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%llx\n",
+		(unsigned long long)entry->end);
+}
+
+static ssize_t type_show(struct firmware_map_entry *entry, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", entry->type);
+}
+
+static inline struct memmap_attribute *to_memmap_attr(struct attribute *attr)
+{
+	return container_of(attr, struct memmap_attribute, attr);
+}
+
+static ssize_t memmap_attr_show(struct kobject *kobj,
+				struct attribute *attr, char *buf)
+{
+	struct firmware_map_entry *entry = to_memmap_entry(kobj);
+	struct memmap_attribute *memmap_attr = to_memmap_attr(attr);
+
+	return memmap_attr->show(entry, buf);
+}
+
+/*
+ * Initialises stuff and adds the entries in the map_entries list to
+ * sysfs. Important is that firmware_map_add() and firmware_map_add_early()
+ * must be called before late_initcall. That's just because that function
+ * is called as late_initcall() function, which means that if you call
+ * firmware_map_add() or firmware_map_add_early() afterwards, the entries
+ * are not added to sysfs.
+ */
+static int __init firmware_memmap_init(void)
+{
+	struct firmware_map_entry *entry;
+
+	list_for_each_entry(entry, &map_entries, list)
+		add_sysfs_fw_map_entry(entry);
+
+	return 0;
+}
+late_initcall(firmware_memmap_init);
+
diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
new file mode 100644
index 000000000..2671dcd0a
--- /dev/null
+++ b/drivers/firmware/meson/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+	bool
+	default ARCH_MESON
+	depends on ARM64_4K_PAGES
+	help
+	  Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile
new file mode 100644
index 000000000..c6c09483b
--- /dev/null
+++ b/drivers/firmware/meson/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_MESON_SM) +=	meson_sm.o
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
new file mode 100644
index 000000000..7dff88331
--- /dev/null
+++ b/drivers/firmware/meson/meson_sm.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#define pr_fmt(fmt) "meson-sm: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+ #include <linux/slab.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+struct meson_sm_cmd {
+	unsigned int index;
+	u32 smc_id;
+};
+#define CMD(d, s) { .index = (d), .smc_id = (s), }
+
+struct meson_sm_chip {
+	unsigned int shmem_size;
+	u32 cmd_shmem_in_base;
+	u32 cmd_shmem_out_base;
+	struct meson_sm_cmd cmd[];
+};
+
+static const struct meson_sm_chip gxbb_chip = {
+	.shmem_size		= SZ_4K,
+	.cmd_shmem_in_base	= 0x82000020,
+	.cmd_shmem_out_base	= 0x82000021,
+	.cmd = {
+		CMD(SM_EFUSE_READ,	0x82000030),
+		CMD(SM_EFUSE_WRITE,	0x82000031),
+		CMD(SM_EFUSE_USER_MAX,	0x82000033),
+		CMD(SM_GET_CHIP_ID,	0x82000044),
+		CMD(SM_A1_PWRC_SET,	0x82000093),
+		CMD(SM_A1_PWRC_GET,	0x82000095),
+		{ /* sentinel */ },
+	},
+};
+
+struct meson_sm_firmware {
+	const struct meson_sm_chip *chip;
+	void __iomem *sm_shmem_in_base;
+	void __iomem *sm_shmem_out_base;
+};
+
+static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip,
+			    unsigned int cmd_index)
+{
+	const struct meson_sm_cmd *cmd = chip->cmd;
+
+	while (cmd->smc_id && cmd->index != cmd_index)
+		cmd++;
+
+	return cmd->smc_id;
+}
+
+static u32 __meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+			   u32 arg3, u32 arg4)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(cmd, arg0, arg1, arg2, arg3, arg4, 0, 0, &res);
+	return res.a0;
+}
+
+static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
+{
+	u32 sm_phy_base;
+
+	sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
+	if (!sm_phy_base)
+		return 0;
+
+	return ioremap_cache(sm_phy_base, size);
+}
+
+/**
+ * meson_sm_call - generic SMC32 call to the secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @cmd_index:	Index of the SMC32 function ID
+ * @ret:	Returned value
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	0 on success, a negative value on error
+ */
+int meson_sm_call(struct meson_sm_firmware *fw, unsigned int cmd_index,
+		  u32 *ret, u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 cmd, lret;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	cmd = meson_sm_get_cmd(fw->chip, cmd_index);
+	if (!cmd)
+		return -EINVAL;
+
+	lret = __meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (ret)
+		*ret = lret;
+
+	return 0;
+}
+EXPORT_SYMBOL(meson_sm_call);
+
+/**
+ * meson_sm_call_read - retrieve data from secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @buffer:	Buffer to store the retrieved data
+ * @bsize:	Size of the buffer
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of read data on success, a negative value on error
+ *		When 0 is returned there is no guarantee about the amount of
+ *		data read and bsize bytes are copied in buffer.
+ */
+int meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer,
+		       unsigned int bsize, unsigned int cmd_index, u32 arg0,
+		       u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 size;
+	int ret;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	if (!fw->chip->cmd_shmem_out_base)
+		return -EINVAL;
+
+	if (bsize > fw->chip->shmem_size)
+		return -EINVAL;
+
+	if (meson_sm_call(fw, cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (size > bsize)
+		return -EINVAL;
+
+	ret = size;
+
+	if (!size)
+		size = bsize;
+
+	if (buffer)
+		memcpy(buffer, fw->sm_shmem_out_base, size);
+
+	return ret;
+}
+EXPORT_SYMBOL(meson_sm_call_read);
+
+/**
+ * meson_sm_call_write - send data to secure-monitor
+ *
+ * @fw:		Pointer to secure-monitor firmware
+ * @buffer:	Buffer containing data to send
+ * @size:	Size of the data to send
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of sent data on success, a negative value on error
+ */
+int meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer,
+			unsigned int size, unsigned int cmd_index, u32 arg0,
+			u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 written;
+
+	if (!fw->chip)
+		return -ENOENT;
+
+	if (size > fw->chip->shmem_size)
+		return -EINVAL;
+
+	if (!fw->chip->cmd_shmem_in_base)
+		return -EINVAL;
+
+	memcpy(fw->sm_shmem_in_base, buffer, size);
+
+	if (meson_sm_call(fw, cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (!written)
+		return -EINVAL;
+
+	return written;
+}
+EXPORT_SYMBOL(meson_sm_call_write);
+
+/**
+ * meson_sm_get - get pointer to meson_sm_firmware structure.
+ *
+ * @sm_node:		Pointer to the secure-monitor Device Tree node.
+ *
+ * Return:		NULL is the secure-monitor device is not ready.
+ */
+struct meson_sm_firmware *meson_sm_get(struct device_node *sm_node)
+{
+	struct platform_device *pdev = of_find_device_by_node(sm_node);
+
+	if (!pdev)
+		return NULL;
+
+	return platform_get_drvdata(pdev);
+}
+EXPORT_SYMBOL_GPL(meson_sm_get);
+
+#define SM_CHIP_ID_LENGTH	119
+#define SM_CHIP_ID_OFFSET	4
+#define SM_CHIP_ID_SIZE		12
+
+static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct meson_sm_firmware *fw;
+	uint8_t *id_buf;
+	int ret;
+
+	fw = platform_get_drvdata(pdev);
+
+	id_buf = kmalloc(SM_CHIP_ID_LENGTH, GFP_KERNEL);
+	if (!id_buf)
+		return -ENOMEM;
+
+	ret = meson_sm_call_read(fw, id_buf, SM_CHIP_ID_LENGTH, SM_GET_CHIP_ID,
+				 0, 0, 0, 0, 0);
+	if (ret < 0) {
+		kfree(id_buf);
+		return ret;
+	}
+
+	ret = sprintf(buf, "%12phN\n", &id_buf[SM_CHIP_ID_OFFSET]);
+
+	kfree(id_buf);
+
+	return ret;
+}
+
+static DEVICE_ATTR_RO(serial);
+
+static struct attribute *meson_sm_sysfs_attributes[] = {
+	&dev_attr_serial.attr,
+	NULL,
+};
+
+static const struct attribute_group meson_sm_sysfs_attr_group = {
+	.attrs = meson_sm_sysfs_attributes,
+};
+
+static const struct of_device_id meson_sm_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip },
+	{ /* sentinel */ },
+};
+
+static int __init meson_sm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct meson_sm_chip *chip;
+	struct meson_sm_firmware *fw;
+
+	fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	chip = of_match_device(meson_sm_ids, dev)->data;
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->cmd_shmem_in_base) {
+		fw->sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base,
+							  chip->shmem_size);
+		if (WARN_ON(!fw->sm_shmem_in_base))
+			goto out;
+	}
+
+	if (chip->cmd_shmem_out_base) {
+		fw->sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base,
+							   chip->shmem_size);
+		if (WARN_ON(!fw->sm_shmem_out_base))
+			goto out_in_base;
+	}
+
+	fw->chip = chip;
+
+	platform_set_drvdata(pdev, fw);
+
+	if (devm_of_platform_populate(dev))
+		goto out_in_base;
+
+	if (sysfs_create_group(&pdev->dev.kobj, &meson_sm_sysfs_attr_group))
+		goto out_in_base;
+
+	pr_info("secure-monitor enabled\n");
+
+	return 0;
+
+out_in_base:
+	iounmap(fw->sm_shmem_in_base);
+out:
+	return -EINVAL;
+}
+
+static struct platform_driver meson_sm_driver = {
+	.driver = {
+		.name = "meson-sm",
+		.of_match_table = of_match_ptr(meson_sm_ids),
+	},
+};
+module_platform_driver_probe(meson_sm_driver, meson_sm_probe);
diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c
new file mode 100644
index 000000000..715a45442
--- /dev/null
+++ b/drivers/firmware/pcdp.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Parse the EFI PCDP table to locate the console device.
+ *
+ * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P.
+ *	Khalid Aziz <khalid.aziz@hp.com>
+ *	Alex Williamson <alex.williamson@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/console.h>
+#include <linux/efi.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <asm/vga.h>
+#include "pcdp.h"
+
+static int __init
+setup_serial_console(struct pcdp_uart *uart)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	int mmio;
+	static char options[64], *p = options;
+	char parity;
+
+	mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
+	p += sprintf(p, "uart8250,%s,0x%llx",
+		mmio ? "mmio" : "io", uart->addr.address);
+	if (uart->baud) {
+		p += sprintf(p, ",%llu", uart->baud);
+		if (uart->bits) {
+			switch (uart->parity) {
+			    case 0x2: parity = 'e'; break;
+			    case 0x3: parity = 'o'; break;
+			    default:  parity = 'n';
+			}
+			p += sprintf(p, "%c%d", parity, uart->bits);
+		}
+	}
+
+	add_preferred_console("uart", 8250, &options[9]);
+	return setup_earlycon(options);
+#else
+	return -ENODEV;
+#endif
+}
+
+static int __init
+setup_vga_console(struct pcdp_device *dev)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+	u8 *if_ptr;
+
+	if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
+	if (if_ptr[0] == PCDP_IF_PCI) {
+		struct pcdp_if_pci if_pci;
+
+		/* struct copy since ifptr might not be correctly aligned */
+
+		memcpy(&if_pci, if_ptr, sizeof(if_pci));
+
+		if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase = if_pci.ioport_tra;
+
+		if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase = if_pci.mmio_tra;
+	}
+
+	if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
+		printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
+		return -ENODEV;
+	}
+
+	conswitchp = &vga_con;
+	printk(KERN_INFO "PCDP: VGA console\n");
+	return 0;
+#else
+	return -ENODEV;
+#endif
+}
+
+extern unsigned long hcdp_phys;
+
+int __init
+efi_setup_pcdp_console(char *cmdline)
+{
+	struct pcdp *pcdp;
+	struct pcdp_uart *uart;
+	struct pcdp_device *dev, *end;
+	int i, serial = 0;
+	int rc = -ENODEV;
+
+	if (hcdp_phys == EFI_INVALID_TABLE_ADDR)
+		return -ENODEV;
+
+	pcdp = early_memremap(hcdp_phys, 4096);
+	printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, hcdp_phys);
+
+	if (strstr(cmdline, "console=hcdp")) {
+		if (pcdp->rev < 3)
+			serial = 1;
+	} else if (strstr(cmdline, "console=")) {
+		printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n");
+		goto out;
+	}
+
+	if (pcdp->rev < 3 && efi_uart_console_only())
+		serial = 1;
+
+	for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) {
+		if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) {
+			if (uart->type == PCDP_CONSOLE_UART) {
+				rc = setup_serial_console(uart);
+				goto out;
+			}
+		}
+	}
+
+	end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length);
+	for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts);
+	     dev < end;
+	     dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
+		if (dev->flags & PCDP_PRIMARY_CONSOLE) {
+			if (dev->type == PCDP_CONSOLE_VGA) {
+				rc = setup_vga_console(dev);
+				goto out;
+			}
+		}
+	}
+
+out:
+	early_memunmap(pcdp, 4096);
+	return rc;
+}
diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
new file mode 100644
index 000000000..e02540571
--- /dev/null
+++ b/drivers/firmware/pcdp.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions for PCDP-defined console devices
+ *
+ * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.),
+ * please see <http://www.dig64.org/specifications/>
+ *
+ * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
+ *	Khalid Aziz <khalid.aziz@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+
+#define PCDP_CONSOLE			0
+#define PCDP_DEBUG			1
+#define PCDP_CONSOLE_OUTPUT		2
+#define PCDP_CONSOLE_INPUT		3
+
+#define PCDP_UART			(0 << 3)
+#define PCDP_VGA			(1 << 3)
+#define PCDP_USB			(2 << 3)
+
+/* pcdp_uart.type and pcdp_device.type */
+#define PCDP_CONSOLE_UART		(PCDP_UART | PCDP_CONSOLE)
+#define PCDP_DEBUG_UART			(PCDP_UART | PCDP_DEBUG)
+#define PCDP_CONSOLE_VGA		(PCDP_VGA  | PCDP_CONSOLE_OUTPUT)
+#define PCDP_CONSOLE_USB		(PCDP_USB  | PCDP_CONSOLE_INPUT)
+
+/* pcdp_uart.flags */
+#define PCDP_UART_EDGE_SENSITIVE	(1 << 0)
+#define PCDP_UART_ACTIVE_LOW		(1 << 1)
+#define PCDP_UART_PRIMARY_CONSOLE	(1 << 2)
+#define PCDP_UART_IRQ			(1 << 6) /* in pci_func for rev < 3 */
+#define PCDP_UART_PCI			(1 << 7) /* in pci_func for rev < 3 */
+
+struct pcdp_uart {
+	u8				type;
+	u8				bits;
+	u8				parity;
+	u8				stop_bits;
+	u8				pci_seg;
+	u8				pci_bus;
+	u8				pci_dev;
+	u8				pci_func;
+	u64				baud;
+	struct acpi_generic_address	addr;
+	u16				pci_dev_id;
+	u16				pci_vendor_id;
+	u32				gsi;
+	u32				clock_rate;
+	u8				pci_prog_intfc;
+	u8				flags;
+	u16				conout_index;
+	u32				reserved;
+} __attribute__((packed));
+
+#define PCDP_IF_PCI	1
+
+/* pcdp_if_pci.trans */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+struct pcdp_if_pci {
+	u8			interconnect;
+	u8			reserved;
+	u16			length;
+	u8			segment;
+	u8			bus;
+	u8			dev;
+	u8			fun;
+	u16			dev_id;
+	u16			vendor_id;
+	u32			acpi_interrupt;
+	u64			mmio_tra;
+	u64			ioport_tra;
+	u8			flags;
+	u8			trans;
+} __attribute__((packed));
+
+struct pcdp_vga {
+	u8			count;		/* address space descriptors */
+} __attribute__((packed));
+
+/* pcdp_device.flags */
+#define PCDP_PRIMARY_CONSOLE	1
+
+struct pcdp_device {
+	u8			type;
+	u8			flags;
+	u16			length;
+	u16			efi_index;
+	/* next data is pcdp_if_pci or pcdp_if_acpi (not yet supported) */
+	/* next data is device specific type (currently only pcdp_vga) */
+} __attribute__((packed));
+
+struct pcdp {
+	u8			signature[4];
+	u32			length;
+	u8			rev;		/* PCDP v2.0 is rev 3 */
+	u8			chksum;
+	u8			oemid[6];
+	u8			oem_tabid[8];
+	u32			oem_rev;
+	u8			creator_id[4];
+	u32			creator_rev;
+	u32			num_uarts;
+	struct pcdp_uart	uart[];	/* actual size is num_uarts */
+	/* remainder of table is pcdp_device structures */
+} __attribute__((packed));
diff --git a/drivers/firmware/psci/Kconfig b/drivers/firmware/psci/Kconfig
new file mode 100644
index 000000000..97944168b
--- /dev/null
+++ b/drivers/firmware/psci/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARM_PSCI_FW
+	bool
+
+config ARM_PSCI_CHECKER
+	bool "ARM PSCI checker"
+	depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
+	help
+	  Run the PSCI checker during startup. This checks that hotplug and
+	  suspend operations work correctly when using PSCI.
+
+	  The torture tests may interfere with the PSCI checker by turning CPUs
+	  on and off through hotplug, so for now torture tests and PSCI checker
+	  are mutually exclusive.
diff --git a/drivers/firmware/psci/Makefile b/drivers/firmware/psci/Makefile
new file mode 100644
index 000000000..1956b8824
--- /dev/null
+++ b/drivers/firmware/psci/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_ARM_PSCI_FW)	+= psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER)	+= psci_checker.o
diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c
new file mode 100644
index 000000000..00af99b6f
--- /dev/null
+++ b/drivers/firmware/psci/psci.c
@@ -0,0 +1,605 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2015 ARM Limited
+ */
+
+#define pr_fmt(fmt) "psci: " fmt
+
+#include <linux/acpi.h>
+#include <linux/arm-smccc.h>
+#include <linux/cpuidle.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/printk.h>
+#include <linux/psci.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+
+#include <uapi/linux/psci.h>
+
+#include <asm/cpuidle.h>
+#include <asm/cputype.h>
+#include <asm/system_misc.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+/*
+ * While a 64-bit OS can make calls with SMC32 calling conventions, for some
+ * calls it is necessary to use SMC64 to pass or return 64-bit values.
+ * For such calls PSCI_FN_NATIVE(version, name) will choose the appropriate
+ * (native-width) function ID.
+ */
+#ifdef CONFIG_64BIT
+#define PSCI_FN_NATIVE(version, name)	PSCI_##version##_FN64_##name
+#else
+#define PSCI_FN_NATIVE(version, name)	PSCI_##version##_FN_##name
+#endif
+
+/*
+ * The CPU any Trusted OS is resident on. The trusted OS may reject CPU_OFF
+ * calls to its resident CPU, so we must avoid issuing those. We never migrate
+ * a Trusted OS even if it claims to be capable of migration -- doing so will
+ * require cooperation with a Trusted OS driver.
+ */
+static int resident_cpu = -1;
+struct psci_operations psci_ops;
+static enum arm_smccc_conduit psci_conduit = SMCCC_CONDUIT_NONE;
+
+bool psci_tos_resident_on(int cpu)
+{
+	return cpu == resident_cpu;
+}
+
+typedef unsigned long (psci_fn)(unsigned long, unsigned long,
+				unsigned long, unsigned long);
+static psci_fn *invoke_psci_fn;
+
+enum psci_function {
+	PSCI_FN_CPU_SUSPEND,
+	PSCI_FN_CPU_ON,
+	PSCI_FN_CPU_OFF,
+	PSCI_FN_MIGRATE,
+	PSCI_FN_MAX,
+};
+
+static u32 psci_function_id[PSCI_FN_MAX];
+
+#define PSCI_0_2_POWER_STATE_MASK		\
+				(PSCI_0_2_POWER_STATE_ID_MASK | \
+				PSCI_0_2_POWER_STATE_TYPE_MASK | \
+				PSCI_0_2_POWER_STATE_AFFL_MASK)
+
+#define PSCI_1_0_EXT_POWER_STATE_MASK		\
+				(PSCI_1_0_EXT_POWER_STATE_ID_MASK | \
+				PSCI_1_0_EXT_POWER_STATE_TYPE_MASK)
+
+static u32 psci_cpu_suspend_feature;
+static bool psci_system_reset2_supported;
+
+static inline bool psci_has_ext_power_state(void)
+{
+	return psci_cpu_suspend_feature &
+				PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK;
+}
+
+bool psci_has_osi_support(void)
+{
+	return psci_cpu_suspend_feature & PSCI_1_0_OS_INITIATED;
+}
+
+static inline bool psci_power_state_loses_context(u32 state)
+{
+	const u32 mask = psci_has_ext_power_state() ?
+					PSCI_1_0_EXT_POWER_STATE_TYPE_MASK :
+					PSCI_0_2_POWER_STATE_TYPE_MASK;
+
+	return state & mask;
+}
+
+bool psci_power_state_is_valid(u32 state)
+{
+	const u32 valid_mask = psci_has_ext_power_state() ?
+			       PSCI_1_0_EXT_POWER_STATE_MASK :
+			       PSCI_0_2_POWER_STATE_MASK;
+
+	return !(state & ~valid_mask);
+}
+
+static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
+			unsigned long arg0, unsigned long arg1,
+			unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_hvc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+	return res.a0;
+}
+
+static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
+			unsigned long arg0, unsigned long arg1,
+			unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
+	return res.a0;
+}
+
+static int psci_to_linux_errno(int errno)
+{
+	switch (errno) {
+	case PSCI_RET_SUCCESS:
+		return 0;
+	case PSCI_RET_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	case PSCI_RET_INVALID_PARAMS:
+	case PSCI_RET_INVALID_ADDRESS:
+		return -EINVAL;
+	case PSCI_RET_DENIED:
+		return -EPERM;
+	};
+
+	return -EINVAL;
+}
+
+static u32 psci_get_version(void)
+{
+	return invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0);
+}
+
+int psci_set_osi_mode(bool enable)
+{
+	unsigned long suspend_mode;
+	int err;
+
+	suspend_mode = enable ? PSCI_1_0_SUSPEND_MODE_OSI :
+			PSCI_1_0_SUSPEND_MODE_PC;
+
+	err = invoke_psci_fn(PSCI_1_0_FN_SET_SUSPEND_MODE, suspend_mode, 0, 0);
+	return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_suspend(u32 state, unsigned long entry_point)
+{
+	int err;
+	u32 fn;
+
+	fn = psci_function_id[PSCI_FN_CPU_SUSPEND];
+	err = invoke_psci_fn(fn, state, entry_point, 0);
+	return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_off(u32 state)
+{
+	int err;
+	u32 fn;
+
+	fn = psci_function_id[PSCI_FN_CPU_OFF];
+	err = invoke_psci_fn(fn, state, 0, 0);
+	return psci_to_linux_errno(err);
+}
+
+static int psci_cpu_on(unsigned long cpuid, unsigned long entry_point)
+{
+	int err;
+	u32 fn;
+
+	fn = psci_function_id[PSCI_FN_CPU_ON];
+	err = invoke_psci_fn(fn, cpuid, entry_point, 0);
+	return psci_to_linux_errno(err);
+}
+
+static int psci_migrate(unsigned long cpuid)
+{
+	int err;
+	u32 fn;
+
+	fn = psci_function_id[PSCI_FN_MIGRATE];
+	err = invoke_psci_fn(fn, cpuid, 0, 0);
+	return psci_to_linux_errno(err);
+}
+
+static int psci_affinity_info(unsigned long target_affinity,
+		unsigned long lowest_affinity_level)
+{
+	return invoke_psci_fn(PSCI_FN_NATIVE(0_2, AFFINITY_INFO),
+			      target_affinity, lowest_affinity_level, 0);
+}
+
+static int psci_migrate_info_type(void)
+{
+	return invoke_psci_fn(PSCI_0_2_FN_MIGRATE_INFO_TYPE, 0, 0, 0);
+}
+
+static unsigned long psci_migrate_info_up_cpu(void)
+{
+	return invoke_psci_fn(PSCI_FN_NATIVE(0_2, MIGRATE_INFO_UP_CPU),
+			      0, 0, 0);
+}
+
+static void set_conduit(enum arm_smccc_conduit conduit)
+{
+	switch (conduit) {
+	case SMCCC_CONDUIT_HVC:
+		invoke_psci_fn = __invoke_psci_fn_hvc;
+		break;
+	case SMCCC_CONDUIT_SMC:
+		invoke_psci_fn = __invoke_psci_fn_smc;
+		break;
+	default:
+		WARN(1, "Unexpected PSCI conduit %d\n", conduit);
+	}
+
+	psci_conduit = conduit;
+}
+
+static int get_set_conduit_method(struct device_node *np)
+{
+	const char *method;
+
+	pr_info("probing for conduit method from DT.\n");
+
+	if (of_property_read_string(np, "method", &method)) {
+		pr_warn("missing \"method\" property\n");
+		return -ENXIO;
+	}
+
+	if (!strcmp("hvc", method)) {
+		set_conduit(SMCCC_CONDUIT_HVC);
+	} else if (!strcmp("smc", method)) {
+		set_conduit(SMCCC_CONDUIT_SMC);
+	} else {
+		pr_warn("invalid \"method\" property: %s\n", method);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd)
+{
+	if ((reboot_mode == REBOOT_WARM || reboot_mode == REBOOT_SOFT) &&
+	    psci_system_reset2_supported) {
+		/*
+		 * reset_type[31] = 0 (architectural)
+		 * reset_type[30:0] = 0 (SYSTEM_WARM_RESET)
+		 * cookie = 0 (ignored by the implementation)
+		 */
+		invoke_psci_fn(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2), 0, 0, 0);
+	} else {
+		invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
+	}
+}
+
+static void psci_sys_poweroff(void)
+{
+	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
+}
+
+static int __init psci_features(u32 psci_func_id)
+{
+	return invoke_psci_fn(PSCI_1_0_FN_PSCI_FEATURES,
+			      psci_func_id, 0, 0);
+}
+
+#ifdef CONFIG_CPU_IDLE
+static int psci_suspend_finisher(unsigned long state)
+{
+	u32 power_state = state;
+
+	return psci_ops.cpu_suspend(power_state, __pa_symbol(cpu_resume));
+}
+
+int psci_cpu_suspend_enter(u32 state)
+{
+	int ret;
+
+	if (!psci_power_state_loses_context(state))
+		ret = psci_ops.cpu_suspend(state, 0);
+	else
+		ret = cpu_suspend(state, psci_suspend_finisher);
+
+	return ret;
+}
+#endif
+
+static int psci_system_suspend(unsigned long unused)
+{
+	return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
+			      __pa_symbol(cpu_resume), 0, 0);
+}
+
+static int psci_system_suspend_enter(suspend_state_t state)
+{
+	return cpu_suspend(0, psci_system_suspend);
+}
+
+static const struct platform_suspend_ops psci_suspend_ops = {
+	.valid          = suspend_valid_only_mem,
+	.enter          = psci_system_suspend_enter,
+};
+
+static void __init psci_init_system_reset2(void)
+{
+	int ret;
+
+	ret = psci_features(PSCI_FN_NATIVE(1_1, SYSTEM_RESET2));
+
+	if (ret != PSCI_RET_NOT_SUPPORTED)
+		psci_system_reset2_supported = true;
+}
+
+static void __init psci_init_system_suspend(void)
+{
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SUSPEND))
+		return;
+
+	ret = psci_features(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND));
+
+	if (ret != PSCI_RET_NOT_SUPPORTED)
+		suspend_set_ops(&psci_suspend_ops);
+}
+
+static void __init psci_init_cpu_suspend(void)
+{
+	int feature = psci_features(psci_function_id[PSCI_FN_CPU_SUSPEND]);
+
+	if (feature != PSCI_RET_NOT_SUPPORTED)
+		psci_cpu_suspend_feature = feature;
+}
+
+/*
+ * Detect the presence of a resident Trusted OS which may cause CPU_OFF to
+ * return DENIED (which would be fatal).
+ */
+static void __init psci_init_migrate(void)
+{
+	unsigned long cpuid;
+	int type, cpu = -1;
+
+	type = psci_ops.migrate_info_type();
+
+	if (type == PSCI_0_2_TOS_MP) {
+		pr_info("Trusted OS migration not required\n");
+		return;
+	}
+
+	if (type == PSCI_RET_NOT_SUPPORTED) {
+		pr_info("MIGRATE_INFO_TYPE not supported.\n");
+		return;
+	}
+
+	if (type != PSCI_0_2_TOS_UP_MIGRATE &&
+	    type != PSCI_0_2_TOS_UP_NO_MIGRATE) {
+		pr_err("MIGRATE_INFO_TYPE returned unknown type (%d)\n", type);
+		return;
+	}
+
+	cpuid = psci_migrate_info_up_cpu();
+	if (cpuid & ~MPIDR_HWID_BITMASK) {
+		pr_warn("MIGRATE_INFO_UP_CPU reported invalid physical ID (0x%lx)\n",
+			cpuid);
+		return;
+	}
+
+	cpu = get_logical_index(cpuid);
+	resident_cpu = cpu >= 0 ? cpu : -1;
+
+	pr_info("Trusted OS resident on physical CPU 0x%lx\n", cpuid);
+}
+
+static void __init psci_init_smccc(void)
+{
+	u32 ver = ARM_SMCCC_VERSION_1_0;
+	int feature;
+
+	feature = psci_features(ARM_SMCCC_VERSION_FUNC_ID);
+
+	if (feature != PSCI_RET_NOT_SUPPORTED) {
+		u32 ret;
+		ret = invoke_psci_fn(ARM_SMCCC_VERSION_FUNC_ID, 0, 0, 0);
+		if (ret >= ARM_SMCCC_VERSION_1_1) {
+			arm_smccc_version_init(ret, psci_conduit);
+			ver = ret;
+		}
+	}
+
+	/*
+	 * Conveniently, the SMCCC and PSCI versions are encoded the
+	 * same way. No, this isn't accidental.
+	 */
+	pr_info("SMC Calling Convention v%d.%d\n",
+		PSCI_VERSION_MAJOR(ver), PSCI_VERSION_MINOR(ver));
+
+}
+
+static void __init psci_0_2_set_functions(void)
+{
+	pr_info("Using standard PSCI v0.2 function IDs\n");
+	psci_ops.get_version = psci_get_version;
+
+	psci_function_id[PSCI_FN_CPU_SUSPEND] =
+					PSCI_FN_NATIVE(0_2, CPU_SUSPEND);
+	psci_ops.cpu_suspend = psci_cpu_suspend;
+
+	psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF;
+	psci_ops.cpu_off = psci_cpu_off;
+
+	psci_function_id[PSCI_FN_CPU_ON] = PSCI_FN_NATIVE(0_2, CPU_ON);
+	psci_ops.cpu_on = psci_cpu_on;
+
+	psci_function_id[PSCI_FN_MIGRATE] = PSCI_FN_NATIVE(0_2, MIGRATE);
+	psci_ops.migrate = psci_migrate;
+
+	psci_ops.affinity_info = psci_affinity_info;
+
+	psci_ops.migrate_info_type = psci_migrate_info_type;
+
+	arm_pm_restart = psci_sys_reset;
+
+	pm_power_off = psci_sys_poweroff;
+}
+
+/*
+ * Probe function for PSCI firmware versions >= 0.2
+ */
+static int __init psci_probe(void)
+{
+	u32 ver = psci_get_version();
+
+	pr_info("PSCIv%d.%d detected in firmware.\n",
+			PSCI_VERSION_MAJOR(ver),
+			PSCI_VERSION_MINOR(ver));
+
+	if (PSCI_VERSION_MAJOR(ver) == 0 && PSCI_VERSION_MINOR(ver) < 2) {
+		pr_err("Conflicting PSCI version detected.\n");
+		return -EINVAL;
+	}
+
+	psci_0_2_set_functions();
+
+	psci_init_migrate();
+
+	if (PSCI_VERSION_MAJOR(ver) >= 1) {
+		psci_init_smccc();
+		psci_init_cpu_suspend();
+		psci_init_system_suspend();
+		psci_init_system_reset2();
+	}
+
+	return 0;
+}
+
+typedef int (*psci_initcall_t)(const struct device_node *);
+
+/*
+ * PSCI init function for PSCI versions >=0.2
+ *
+ * Probe based on PSCI PSCI_VERSION function
+ */
+static int __init psci_0_2_init(struct device_node *np)
+{
+	int err;
+
+	err = get_set_conduit_method(np);
+	if (err)
+		return err;
+
+	/*
+	 * Starting with v0.2, the PSCI specification introduced a call
+	 * (PSCI_VERSION) that allows probing the firmware version, so
+	 * that PSCI function IDs and version specific initialization
+	 * can be carried out according to the specific version reported
+	 * by firmware
+	 */
+	return psci_probe();
+}
+
+/*
+ * PSCI < v0.2 get PSCI Function IDs via DT.
+ */
+static int __init psci_0_1_init(struct device_node *np)
+{
+	u32 id;
+	int err;
+
+	err = get_set_conduit_method(np);
+	if (err)
+		return err;
+
+	pr_info("Using PSCI v0.1 Function IDs from DT\n");
+
+	if (!of_property_read_u32(np, "cpu_suspend", &id)) {
+		psci_function_id[PSCI_FN_CPU_SUSPEND] = id;
+		psci_ops.cpu_suspend = psci_cpu_suspend;
+	}
+
+	if (!of_property_read_u32(np, "cpu_off", &id)) {
+		psci_function_id[PSCI_FN_CPU_OFF] = id;
+		psci_ops.cpu_off = psci_cpu_off;
+	}
+
+	if (!of_property_read_u32(np, "cpu_on", &id)) {
+		psci_function_id[PSCI_FN_CPU_ON] = id;
+		psci_ops.cpu_on = psci_cpu_on;
+	}
+
+	if (!of_property_read_u32(np, "migrate", &id)) {
+		psci_function_id[PSCI_FN_MIGRATE] = id;
+		psci_ops.migrate = psci_migrate;
+	}
+
+	return 0;
+}
+
+static int __init psci_1_0_init(struct device_node *np)
+{
+	int err;
+
+	err = psci_0_2_init(np);
+	if (err)
+		return err;
+
+	if (psci_has_osi_support()) {
+		pr_info("OSI mode supported.\n");
+
+		/* Default to PC mode. */
+		psci_set_osi_mode(false);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id psci_of_match[] __initconst = {
+	{ .compatible = "arm,psci",	.data = psci_0_1_init},
+	{ .compatible = "arm,psci-0.2",	.data = psci_0_2_init},
+	{ .compatible = "arm,psci-1.0",	.data = psci_1_0_init},
+	{},
+};
+
+int __init psci_dt_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *matched_np;
+	psci_initcall_t init_fn;
+	int ret;
+
+	np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np);
+
+	if (!np || !of_device_is_available(np))
+		return -ENODEV;
+
+	init_fn = (psci_initcall_t)matched_np->data;
+	ret = init_fn(np);
+
+	of_node_put(np);
+	return ret;
+}
+
+#ifdef CONFIG_ACPI
+/*
+ * We use PSCI 0.2+ when ACPI is deployed on ARM64 and it's
+ * explicitly clarified in SBBR
+ */
+int __init psci_acpi_init(void)
+{
+	if (!acpi_psci_present()) {
+		pr_info("is not implemented in ACPI.\n");
+		return -EOPNOTSUPP;
+	}
+
+	pr_info("probing for conduit method from ACPI.\n");
+
+	if (acpi_psci_use_hvc())
+		set_conduit(SMCCC_CONDUIT_HVC);
+	else
+		set_conduit(SMCCC_CONDUIT_SMC);
+
+	return psci_probe();
+}
+#endif
diff --git a/drivers/firmware/psci/psci_checker.c b/drivers/firmware/psci/psci_checker.c
new file mode 100644
index 000000000..116eb465c
--- /dev/null
+++ b/drivers/firmware/psci/psci_checker.c
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2016 ARM Limited
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/atomic.h>
+#include <linux/completion.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <uapi/linux/sched/types.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/psci.h>
+#include <linux/slab.h>
+#include <linux/tick.h>
+#include <linux/topology.h>
+
+#include <asm/cpuidle.h>
+
+#include <uapi/linux/psci.h>
+
+#define NUM_SUSPEND_CYCLE (10)
+
+static unsigned int nb_available_cpus;
+static int tos_resident_cpu = -1;
+
+static atomic_t nb_active_threads;
+static struct completion suspend_threads_started =
+	COMPLETION_INITIALIZER(suspend_threads_started);
+static struct completion suspend_threads_done =
+	COMPLETION_INITIALIZER(suspend_threads_done);
+
+/*
+ * We assume that PSCI operations are used if they are available. This is not
+ * necessarily true on arm64, since the decision is based on the
+ * "enable-method" property of each CPU in the DT, but given that there is no
+ * arch-specific way to check this, we assume that the DT is sensible.
+ */
+static int psci_ops_check(void)
+{
+	int migrate_type = -1;
+	int cpu;
+
+	if (!(psci_ops.cpu_off && psci_ops.cpu_on && psci_ops.cpu_suspend)) {
+		pr_warn("Missing PSCI operations, aborting tests\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (psci_ops.migrate_info_type)
+		migrate_type = psci_ops.migrate_info_type();
+
+	if (migrate_type == PSCI_0_2_TOS_UP_MIGRATE ||
+	    migrate_type == PSCI_0_2_TOS_UP_NO_MIGRATE) {
+		/* There is a UP Trusted OS, find on which core it resides. */
+		for_each_online_cpu(cpu)
+			if (psci_tos_resident_on(cpu)) {
+				tos_resident_cpu = cpu;
+				break;
+			}
+		if (tos_resident_cpu == -1)
+			pr_warn("UP Trusted OS resides on no online CPU\n");
+	}
+
+	return 0;
+}
+
+/*
+ * offlined_cpus is a temporary array but passing it as an argument avoids
+ * multiple allocations.
+ */
+static unsigned int down_and_up_cpus(const struct cpumask *cpus,
+				     struct cpumask *offlined_cpus)
+{
+	int cpu;
+	int err = 0;
+
+	cpumask_clear(offlined_cpus);
+
+	/* Try to power down all CPUs in the mask. */
+	for_each_cpu(cpu, cpus) {
+		int ret = remove_cpu(cpu);
+
+		/*
+		 * cpu_down() checks the number of online CPUs before the TOS
+		 * resident CPU.
+		 */
+		if (cpumask_weight(offlined_cpus) + 1 == nb_available_cpus) {
+			if (ret != -EBUSY) {
+				pr_err("Unexpected return code %d while trying "
+				       "to power down last online CPU %d\n",
+				       ret, cpu);
+				++err;
+			}
+		} else if (cpu == tos_resident_cpu) {
+			if (ret != -EPERM) {
+				pr_err("Unexpected return code %d while trying "
+				       "to power down TOS resident CPU %d\n",
+				       ret, cpu);
+				++err;
+			}
+		} else if (ret != 0) {
+			pr_err("Error occurred (%d) while trying "
+			       "to power down CPU %d\n", ret, cpu);
+			++err;
+		}
+
+		if (ret == 0)
+			cpumask_set_cpu(cpu, offlined_cpus);
+	}
+
+	/* Try to power up all the CPUs that have been offlined. */
+	for_each_cpu(cpu, offlined_cpus) {
+		int ret = add_cpu(cpu);
+
+		if (ret != 0) {
+			pr_err("Error occurred (%d) while trying "
+			       "to power up CPU %d\n", ret, cpu);
+			++err;
+		} else {
+			cpumask_clear_cpu(cpu, offlined_cpus);
+		}
+	}
+
+	/*
+	 * Something went bad at some point and some CPUs could not be turned
+	 * back on.
+	 */
+	WARN_ON(!cpumask_empty(offlined_cpus) ||
+		num_online_cpus() != nb_available_cpus);
+
+	return err;
+}
+
+static void free_cpu_groups(int num, cpumask_var_t **pcpu_groups)
+{
+	int i;
+	cpumask_var_t *cpu_groups = *pcpu_groups;
+
+	for (i = 0; i < num; ++i)
+		free_cpumask_var(cpu_groups[i]);
+	kfree(cpu_groups);
+}
+
+static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
+{
+	int num_groups = 0;
+	cpumask_var_t tmp, *cpu_groups;
+
+	if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+		return -ENOMEM;
+
+	cpu_groups = kcalloc(nb_available_cpus, sizeof(*cpu_groups),
+			     GFP_KERNEL);
+	if (!cpu_groups) {
+		free_cpumask_var(tmp);
+		return -ENOMEM;
+	}
+
+	cpumask_copy(tmp, cpu_online_mask);
+
+	while (!cpumask_empty(tmp)) {
+		const struct cpumask *cpu_group =
+			topology_core_cpumask(cpumask_any(tmp));
+
+		if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) {
+			free_cpumask_var(tmp);
+			free_cpu_groups(num_groups, &cpu_groups);
+			return -ENOMEM;
+		}
+		cpumask_copy(cpu_groups[num_groups++], cpu_group);
+		cpumask_andnot(tmp, tmp, cpu_group);
+	}
+
+	free_cpumask_var(tmp);
+	*pcpu_groups = cpu_groups;
+
+	return num_groups;
+}
+
+static int hotplug_tests(void)
+{
+	int i, nb_cpu_group, err = -ENOMEM;
+	cpumask_var_t offlined_cpus, *cpu_groups;
+	char *page_buf;
+
+	if (!alloc_cpumask_var(&offlined_cpus, GFP_KERNEL))
+		return err;
+
+	nb_cpu_group = alloc_init_cpu_groups(&cpu_groups);
+	if (nb_cpu_group < 0)
+		goto out_free_cpus;
+	page_buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!page_buf)
+		goto out_free_cpu_groups;
+
+	/*
+	 * Of course the last CPU cannot be powered down and cpu_down() should
+	 * refuse doing that.
+	 */
+	pr_info("Trying to turn off and on again all CPUs\n");
+	err = down_and_up_cpus(cpu_online_mask, offlined_cpus);
+
+	/*
+	 * Take down CPUs by cpu group this time. When the last CPU is turned
+	 * off, the cpu group itself should shut down.
+	 */
+	for (i = 0; i < nb_cpu_group; ++i) {
+		ssize_t len = cpumap_print_to_pagebuf(true, page_buf,
+						      cpu_groups[i]);
+		/* Remove trailing newline. */
+		page_buf[len - 1] = '\0';
+		pr_info("Trying to turn off and on again group %d (CPUs %s)\n",
+			i, page_buf);
+		err += down_and_up_cpus(cpu_groups[i], offlined_cpus);
+	}
+
+	free_page((unsigned long)page_buf);
+out_free_cpu_groups:
+	free_cpu_groups(nb_cpu_group, &cpu_groups);
+out_free_cpus:
+	free_cpumask_var(offlined_cpus);
+	return err;
+}
+
+static void dummy_callback(struct timer_list *unused) {}
+
+static int suspend_cpu(struct cpuidle_device *dev,
+		       struct cpuidle_driver *drv, int index)
+{
+	struct cpuidle_state *state = &drv->states[index];
+	bool broadcast = state->flags & CPUIDLE_FLAG_TIMER_STOP;
+	int ret;
+
+	arch_cpu_idle_enter();
+
+	if (broadcast) {
+		/*
+		 * The local timer will be shut down, we need to enter tick
+		 * broadcast.
+		 */
+		ret = tick_broadcast_enter();
+		if (ret) {
+			/*
+			 * In the absence of hardware broadcast mechanism,
+			 * this CPU might be used to broadcast wakeups, which
+			 * may be why entering tick broadcast has failed.
+			 * There is little the kernel can do to work around
+			 * that, so enter WFI instead (idle state 0).
+			 */
+			cpu_do_idle();
+			ret = 0;
+			goto out_arch_exit;
+		}
+	}
+
+	ret = state->enter(dev, drv, index);
+
+	if (broadcast)
+		tick_broadcast_exit();
+
+out_arch_exit:
+	arch_cpu_idle_exit();
+
+	return ret;
+}
+
+static int suspend_test_thread(void *arg)
+{
+	int cpu = (long)arg;
+	int i, nb_suspend = 0, nb_shallow_sleep = 0, nb_err = 0;
+	struct cpuidle_device *dev;
+	struct cpuidle_driver *drv;
+	/* No need for an actual callback, we just want to wake up the CPU. */
+	struct timer_list wakeup_timer;
+
+	/* Wait for the main thread to give the start signal. */
+	wait_for_completion(&suspend_threads_started);
+
+	/* Set maximum priority to preempt all other threads on this CPU. */
+	sched_set_fifo(current);
+
+	dev = this_cpu_read(cpuidle_devices);
+	drv = cpuidle_get_cpu_driver(dev);
+
+	pr_info("CPU %d entering suspend cycles, states 1 through %d\n",
+		cpu, drv->state_count - 1);
+
+	timer_setup_on_stack(&wakeup_timer, dummy_callback, 0);
+	for (i = 0; i < NUM_SUSPEND_CYCLE; ++i) {
+		int index;
+		/*
+		 * Test all possible states, except 0 (which is usually WFI and
+		 * doesn't use PSCI).
+		 */
+		for (index = 1; index < drv->state_count; ++index) {
+			int ret;
+			struct cpuidle_state *state = &drv->states[index];
+
+			/*
+			 * Set the timer to wake this CPU up in some time (which
+			 * should be largely sufficient for entering suspend).
+			 * If the local tick is disabled when entering suspend,
+			 * suspend_cpu() takes care of switching to a broadcast
+			 * tick, so the timer will still wake us up.
+			 */
+			mod_timer(&wakeup_timer, jiffies +
+				  usecs_to_jiffies(state->target_residency));
+
+			/* IRQs must be disabled during suspend operations. */
+			local_irq_disable();
+
+			ret = suspend_cpu(dev, drv, index);
+
+			/*
+			 * We have woken up. Re-enable IRQs to handle any
+			 * pending interrupt, do not wait until the end of the
+			 * loop.
+			 */
+			local_irq_enable();
+
+			if (ret == index) {
+				++nb_suspend;
+			} else if (ret >= 0) {
+				/* We did not enter the expected state. */
+				++nb_shallow_sleep;
+			} else {
+				pr_err("Failed to suspend CPU %d: error %d "
+				       "(requested state %d, cycle %d)\n",
+				       cpu, ret, index, i);
+				++nb_err;
+			}
+		}
+	}
+
+	/*
+	 * Disable the timer to make sure that the timer will not trigger
+	 * later.
+	 */
+	del_timer(&wakeup_timer);
+	destroy_timer_on_stack(&wakeup_timer);
+
+	if (atomic_dec_return_relaxed(&nb_active_threads) == 0)
+		complete(&suspend_threads_done);
+
+	for (;;) {
+		/* Needs to be set first to avoid missing a wakeup. */
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_park())
+			break;
+		schedule();
+	}
+
+	pr_info("CPU %d suspend test results: success %d, shallow states %d, errors %d\n",
+		cpu, nb_suspend, nb_shallow_sleep, nb_err);
+
+	kthread_parkme();
+
+	return nb_err;
+}
+
+static int suspend_tests(void)
+{
+	int i, cpu, err = 0;
+	struct task_struct **threads;
+	int nb_threads = 0;
+
+	threads = kmalloc_array(nb_available_cpus, sizeof(*threads),
+				GFP_KERNEL);
+	if (!threads)
+		return -ENOMEM;
+
+	/*
+	 * Stop cpuidle to prevent the idle tasks from entering a deep sleep
+	 * mode, as it might interfere with the suspend threads on other CPUs.
+	 * This does not prevent the suspend threads from using cpuidle (only
+	 * the idle tasks check this status). Take the idle lock so that
+	 * the cpuidle driver and device look-up can be carried out safely.
+	 */
+	cpuidle_pause_and_lock();
+
+	for_each_online_cpu(cpu) {
+		struct task_struct *thread;
+		/* Check that cpuidle is available on that CPU. */
+		struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
+		struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
+
+		if (!dev || !drv) {
+			pr_warn("cpuidle not available on CPU %d, ignoring\n",
+				cpu);
+			continue;
+		}
+
+		thread = kthread_create_on_cpu(suspend_test_thread,
+					       (void *)(long)cpu, cpu,
+					       "psci_suspend_test");
+		if (IS_ERR(thread))
+			pr_err("Failed to create kthread on CPU %d\n", cpu);
+		else
+			threads[nb_threads++] = thread;
+	}
+
+	if (nb_threads < 1) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	atomic_set(&nb_active_threads, nb_threads);
+
+	/*
+	 * Wake up the suspend threads. To avoid the main thread being preempted
+	 * before all the threads have been unparked, the suspend threads will
+	 * wait for the completion of suspend_threads_started.
+	 */
+	for (i = 0; i < nb_threads; ++i)
+		wake_up_process(threads[i]);
+	complete_all(&suspend_threads_started);
+
+	wait_for_completion(&suspend_threads_done);
+
+
+	/* Stop and destroy all threads, get return status. */
+	for (i = 0; i < nb_threads; ++i) {
+		err += kthread_park(threads[i]);
+		err += kthread_stop(threads[i]);
+	}
+ out:
+	cpuidle_resume_and_unlock();
+	kfree(threads);
+	return err;
+}
+
+static int __init psci_checker(void)
+{
+	int ret;
+
+	/*
+	 * Since we're in an initcall, we assume that all the CPUs that all
+	 * CPUs that can be onlined have been onlined.
+	 *
+	 * The tests assume that hotplug is enabled but nobody else is using it,
+	 * otherwise the results will be unpredictable. However, since there
+	 * is no userspace yet in initcalls, that should be fine, as long as
+	 * no torture test is running at the same time (see Kconfig).
+	 */
+	nb_available_cpus = num_online_cpus();
+
+	/* Check PSCI operations are set up and working. */
+	ret = psci_ops_check();
+	if (ret)
+		return ret;
+
+	pr_info("PSCI checker started using %u CPUs\n", nb_available_cpus);
+
+	pr_info("Starting hotplug tests\n");
+	ret = hotplug_tests();
+	if (ret == 0)
+		pr_info("Hotplug tests passed OK\n");
+	else if (ret > 0)
+		pr_err("%d error(s) encountered in hotplug tests\n", ret);
+	else {
+		pr_err("Out of memory\n");
+		return ret;
+	}
+
+	pr_info("Starting suspend tests (%d cycles per state)\n",
+		NUM_SUSPEND_CYCLE);
+	ret = suspend_tests();
+	if (ret == 0)
+		pr_info("Suspend tests passed OK\n");
+	else if (ret > 0)
+		pr_err("%d error(s) encountered in suspend tests\n", ret);
+	else {
+		switch (ret) {
+		case -ENOMEM:
+			pr_err("Out of memory\n");
+			break;
+		case -ENODEV:
+			pr_warn("Could not start suspend tests on any CPU\n");
+			break;
+		}
+	}
+
+	pr_info("PSCI checker completed\n");
+	return ret < 0 ? ret : 0;
+}
+late_initcall(psci_checker);
diff --git a/drivers/firmware/qcom_scm-legacy.c b/drivers/firmware/qcom_scm-legacy.c
new file mode 100644
index 000000000..eba6b60bf
--- /dev/null
+++ b/drivers/firmware/qcom_scm-legacy.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/qcom_scm.h>
+#include <linux/arm-smccc.h>
+#include <linux/dma-mapping.h>
+
+#include "qcom_scm.h"
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+
+/**
+ * struct arm_smccc_args
+ * @args:	The array of values used in registers in smc instruction
+ */
+struct arm_smccc_args {
+	unsigned long args[8];
+};
+
+
+/**
+ * struct scm_legacy_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from scm_legacy_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ *	------------------- <--- struct scm_legacy_command
+ *	| command header  |
+ *	------------------- <--- scm_legacy_get_command_buffer()
+ *	| command buffer  |
+ *	------------------- <--- struct scm_legacy_response and
+ *	| response header |      scm_legacy_command_to_response()
+ *	------------------- <--- scm_legacy_get_response_buffer()
+ *	| response buffer |
+ *	-------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate scm_legacy_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct scm_legacy_command {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 resp_hdr_offset;
+	__le32 id;
+	__le32 buf[];
+};
+
+/**
+ * struct scm_legacy_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of scm_legacy_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct scm_legacy_response {
+	__le32 len;
+	__le32 buf_offset;
+	__le32 is_complete;
+};
+
+/**
+ * scm_legacy_command_to_response() - Get a pointer to a scm_legacy_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct scm_legacy_response *scm_legacy_command_to_response(
+		const struct scm_legacy_command *cmd)
+{
+	return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset);
+}
+
+/**
+ * scm_legacy_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *scm_legacy_get_command_buffer(
+		const struct scm_legacy_command *cmd)
+{
+	return (void *)cmd->buf;
+}
+
+/**
+ * scm_legacy_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *scm_legacy_get_response_buffer(
+		const struct scm_legacy_response *rsp)
+{
+	return (void *)rsp + le32_to_cpu(rsp->buf_offset);
+}
+
+static void __scm_legacy_do(const struct arm_smccc_args *smc,
+			    struct arm_smccc_res *res)
+{
+	do {
+		arm_smccc_smc(smc->args[0], smc->args[1], smc->args[2],
+			      smc->args[3], smc->args[4], smc->args[5],
+			      smc->args[6], smc->args[7], res);
+	} while (res->a0 == QCOM_SCM_INTERRUPTED);
+}
+
+/**
+ * qcom_scm_call() - Sends a command to the SCM and waits for the command to
+ * finish processing.
+ *
+ * A note on cache maintenance:
+ * Note that any buffers that are expected to be accessed by the secure world
+ * must be flushed before invoking qcom_scm_call and invalidated in the cache
+ * immediately after qcom_scm_call returns. Cache maintenance on the command
+ * and response buffers is taken care of by qcom_scm_call; however, callers are
+ * responsible for any other cached buffers passed over to the secure world.
+ */
+int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
+		    struct qcom_scm_res *res)
+{
+	u8 arglen = desc->arginfo & 0xf;
+	int ret = 0, context_id;
+	unsigned int i;
+	struct scm_legacy_command *cmd;
+	struct scm_legacy_response *rsp;
+	struct arm_smccc_args smc = {0};
+	struct arm_smccc_res smc_res;
+	const size_t cmd_len = arglen * sizeof(__le32);
+	const size_t resp_len = MAX_QCOM_SCM_RETS * sizeof(__le32);
+	size_t alloc_len = sizeof(*cmd) + cmd_len + sizeof(*rsp) + resp_len;
+	dma_addr_t cmd_phys;
+	__le32 *arg_buf;
+	const __le32 *res_buf;
+
+	cmd = kzalloc(PAGE_ALIGN(alloc_len), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->len = cpu_to_le32(alloc_len);
+	cmd->buf_offset = cpu_to_le32(sizeof(*cmd));
+	cmd->resp_hdr_offset = cpu_to_le32(sizeof(*cmd) + cmd_len);
+	cmd->id = cpu_to_le32(SCM_LEGACY_FNID(desc->svc, desc->cmd));
+
+	arg_buf = scm_legacy_get_command_buffer(cmd);
+	for (i = 0; i < arglen; i++)
+		arg_buf[i] = cpu_to_le32(desc->args[i]);
+
+	rsp = scm_legacy_command_to_response(cmd);
+
+	cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, cmd_phys)) {
+		kfree(cmd);
+		return -ENOMEM;
+	}
+
+	smc.args[0] = 1;
+	smc.args[1] = (unsigned long)&context_id;
+	smc.args[2] = cmd_phys;
+
+	mutex_lock(&qcom_scm_lock);
+	__scm_legacy_do(&smc, &smc_res);
+	if (smc_res.a0)
+		ret = qcom_scm_remap_error(smc_res.a0);
+	mutex_unlock(&qcom_scm_lock);
+	if (ret)
+		goto out;
+
+	do {
+		dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len,
+					sizeof(*rsp), DMA_FROM_DEVICE);
+	} while (!rsp->is_complete);
+
+	dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len +
+				le32_to_cpu(rsp->buf_offset),
+				resp_len, DMA_FROM_DEVICE);
+
+	if (res) {
+		res_buf = scm_legacy_get_response_buffer(rsp);
+		for (i = 0; i < MAX_QCOM_SCM_RETS; i++)
+			res->result[i] = le32_to_cpu(res_buf[i]);
+	}
+out:
+	dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE);
+	kfree(cmd);
+	return ret;
+}
+
+#define SCM_LEGACY_ATOMIC_N_REG_ARGS	5
+#define SCM_LEGACY_ATOMIC_FIRST_REG_IDX	2
+#define SCM_LEGACY_CLASS_REGISTER		(0x2 << 8)
+#define SCM_LEGACY_MASK_IRQS		BIT(5)
+#define SCM_LEGACY_ATOMIC_ID(svc, cmd, n) \
+				((SCM_LEGACY_FNID(svc, cmd) << 12) | \
+				SCM_LEGACY_CLASS_REGISTER | \
+				SCM_LEGACY_MASK_IRQS | \
+				(n & 0xf))
+
+/**
+ * qcom_scm_call_atomic() - Send an atomic SCM command with up to 5 arguments
+ * and 3 return values
+ * @desc: SCM call descriptor containing arguments
+ * @res:  SCM call return values
+ *
+ * This shall only be used with commands that are guaranteed to be
+ * uninterruptable, atomic and SMP safe.
+ */
+int scm_legacy_call_atomic(struct device *unused,
+			   const struct qcom_scm_desc *desc,
+			   struct qcom_scm_res *res)
+{
+	int context_id;
+	struct arm_smccc_res smc_res;
+	size_t arglen = desc->arginfo & 0xf;
+
+	BUG_ON(arglen > SCM_LEGACY_ATOMIC_N_REG_ARGS);
+
+	arm_smccc_smc(SCM_LEGACY_ATOMIC_ID(desc->svc, desc->cmd, arglen),
+		      (unsigned long)&context_id,
+		      desc->args[0], desc->args[1], desc->args[2],
+		      desc->args[3], desc->args[4], 0, &smc_res);
+
+	if (res) {
+		res->result[0] = smc_res.a1;
+		res->result[1] = smc_res.a2;
+		res->result[2] = smc_res.a3;
+	}
+
+	return smc_res.a0;
+}
diff --git a/drivers/firmware/qcom_scm-smc.c b/drivers/firmware/qcom_scm-smc.c
new file mode 100644
index 000000000..d11183336
--- /dev/null
+++ b/drivers/firmware/qcom_scm-smc.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2015,2019 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/qcom_scm.h>
+#include <linux/arm-smccc.h>
+#include <linux/dma-mapping.h>
+
+#include "qcom_scm.h"
+
+/**
+ * struct arm_smccc_args
+ * @args:	The array of values used in registers in smc instruction
+ */
+struct arm_smccc_args {
+	unsigned long args[8];
+};
+
+static DEFINE_MUTEX(qcom_scm_lock);
+
+#define QCOM_SCM_EBUSY_WAIT_MS 30
+#define QCOM_SCM_EBUSY_MAX_RETRY 20
+
+#define SCM_SMC_N_REG_ARGS	4
+#define SCM_SMC_FIRST_EXT_IDX	(SCM_SMC_N_REG_ARGS - 1)
+#define SCM_SMC_N_EXT_ARGS	(MAX_QCOM_SCM_ARGS - SCM_SMC_N_REG_ARGS + 1)
+#define SCM_SMC_FIRST_REG_IDX	2
+#define SCM_SMC_LAST_REG_IDX	(SCM_SMC_FIRST_REG_IDX + SCM_SMC_N_REG_ARGS - 1)
+
+static void __scm_smc_do_quirk(const struct arm_smccc_args *smc,
+			       struct arm_smccc_res *res)
+{
+	unsigned long a0 = smc->args[0];
+	struct arm_smccc_quirk quirk = { .id = ARM_SMCCC_QUIRK_QCOM_A6 };
+
+	quirk.state.a6 = 0;
+
+	do {
+		arm_smccc_smc_quirk(a0, smc->args[1], smc->args[2],
+				    smc->args[3], smc->args[4], smc->args[5],
+				    quirk.state.a6, smc->args[7], res, &quirk);
+
+		if (res->a0 == QCOM_SCM_INTERRUPTED)
+			a0 = res->a0;
+
+	} while (res->a0 == QCOM_SCM_INTERRUPTED);
+}
+
+static void __scm_smc_do(const struct arm_smccc_args *smc,
+			 struct arm_smccc_res *res, bool atomic)
+{
+	int retry_count = 0;
+
+	if (atomic) {
+		__scm_smc_do_quirk(smc, res);
+		return;
+	}
+
+	do {
+		mutex_lock(&qcom_scm_lock);
+
+		__scm_smc_do_quirk(smc, res);
+
+		mutex_unlock(&qcom_scm_lock);
+
+		if (res->a0 == QCOM_SCM_V2_EBUSY) {
+			if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
+				break;
+			msleep(QCOM_SCM_EBUSY_WAIT_MS);
+		}
+	}  while (res->a0 == QCOM_SCM_V2_EBUSY);
+}
+
+
+int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+		   enum qcom_scm_convention qcom_convention,
+		   struct qcom_scm_res *res, bool atomic)
+{
+	int arglen = desc->arginfo & 0xf;
+	int i;
+	dma_addr_t args_phys = 0;
+	void *args_virt = NULL;
+	size_t alloc_len;
+	gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL;
+	u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL;
+	u32 qcom_smccc_convention = (qcom_convention == SMC_CONVENTION_ARM_32) ?
+				    ARM_SMCCC_SMC_32 : ARM_SMCCC_SMC_64;
+	struct arm_smccc_res smc_res;
+	struct arm_smccc_args smc = {0};
+
+	smc.args[0] = ARM_SMCCC_CALL_VAL(
+		smccc_call_type,
+		qcom_smccc_convention,
+		desc->owner,
+		SCM_SMC_FNID(desc->svc, desc->cmd));
+	smc.args[1] = desc->arginfo;
+	for (i = 0; i < SCM_SMC_N_REG_ARGS; i++)
+		smc.args[i + SCM_SMC_FIRST_REG_IDX] = desc->args[i];
+
+	if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) {
+		alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64);
+		args_virt = kzalloc(PAGE_ALIGN(alloc_len), flag);
+
+		if (!args_virt)
+			return -ENOMEM;
+
+		if (qcom_smccc_convention == ARM_SMCCC_SMC_32) {
+			__le32 *args = args_virt;
+
+			for (i = 0; i < SCM_SMC_N_EXT_ARGS; i++)
+				args[i] = cpu_to_le32(desc->args[i +
+						      SCM_SMC_FIRST_EXT_IDX]);
+		} else {
+			__le64 *args = args_virt;
+
+			for (i = 0; i < SCM_SMC_N_EXT_ARGS; i++)
+				args[i] = cpu_to_le64(desc->args[i +
+						      SCM_SMC_FIRST_EXT_IDX]);
+		}
+
+		args_phys = dma_map_single(dev, args_virt, alloc_len,
+					   DMA_TO_DEVICE);
+
+		if (dma_mapping_error(dev, args_phys)) {
+			kfree(args_virt);
+			return -ENOMEM;
+		}
+
+		smc.args[SCM_SMC_LAST_REG_IDX] = args_phys;
+	}
+
+	__scm_smc_do(&smc, &smc_res, atomic);
+
+	if (args_virt) {
+		dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
+		kfree(args_virt);
+	}
+
+	if (res) {
+		res->result[0] = smc_res.a1;
+		res->result[1] = smc_res.a2;
+		res->result[2] = smc_res.a3;
+	}
+
+	return (long)smc_res.a0 ? qcom_scm_remap_error(smc_res.a0) : 0;
+
+}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
new file mode 100644
index 000000000..3e3e37e0e
--- /dev/null
+++ b/drivers/firmware/qcom_scm.c
@@ -0,0 +1,1307 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2010,2015,2019 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/qcom_scm.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/reset-controller.h>
+#include <linux/arm-smccc.h>
+
+#include "qcom_scm.h"
+
+static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
+module_param(download_mode, bool, 0);
+
+#define SCM_HAS_CORE_CLK	BIT(0)
+#define SCM_HAS_IFACE_CLK	BIT(1)
+#define SCM_HAS_BUS_CLK		BIT(2)
+
+struct qcom_scm {
+	struct device *dev;
+	struct clk *core_clk;
+	struct clk *iface_clk;
+	struct clk *bus_clk;
+	struct reset_controller_dev reset;
+
+	u64 dload_mode_addr;
+};
+
+struct qcom_scm_current_perm_info {
+	__le32 vmid;
+	__le32 perm;
+	__le64 ctx;
+	__le32 ctx_size;
+	__le32 unused;
+};
+
+struct qcom_scm_mem_map_info {
+	__le64 mem_addr;
+	__le64 mem_size;
+};
+
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0	0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1	0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2	0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3	0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0	0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1	0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2	0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3	0x40
+
+struct qcom_scm_wb_entry {
+	int flag;
+	void *entry;
+};
+
+static struct qcom_scm_wb_entry qcom_scm_wb[] = {
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+	{ .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
+static const char *qcom_scm_convention_names[] = {
+	[SMC_CONVENTION_UNKNOWN] = "unknown",
+	[SMC_CONVENTION_ARM_32] = "smc arm 32",
+	[SMC_CONVENTION_ARM_64] = "smc arm 64",
+	[SMC_CONVENTION_LEGACY] = "smc legacy",
+};
+
+static struct qcom_scm *__scm;
+
+static int qcom_scm_clk_enable(void)
+{
+	int ret;
+
+	ret = clk_prepare_enable(__scm->core_clk);
+	if (ret)
+		goto bail;
+
+	ret = clk_prepare_enable(__scm->iface_clk);
+	if (ret)
+		goto disable_core;
+
+	ret = clk_prepare_enable(__scm->bus_clk);
+	if (ret)
+		goto disable_iface;
+
+	return 0;
+
+disable_iface:
+	clk_disable_unprepare(__scm->iface_clk);
+disable_core:
+	clk_disable_unprepare(__scm->core_clk);
+bail:
+	return ret;
+}
+
+static void qcom_scm_clk_disable(void)
+{
+	clk_disable_unprepare(__scm->core_clk);
+	clk_disable_unprepare(__scm->iface_clk);
+	clk_disable_unprepare(__scm->bus_clk);
+}
+
+enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN;
+static DEFINE_SPINLOCK(scm_query_lock);
+
+static enum qcom_scm_convention __get_convention(void)
+{
+	unsigned long flags;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_INFO,
+		.cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+		.args[0] = SCM_SMC_FNID(QCOM_SCM_SVC_INFO,
+					   QCOM_SCM_INFO_IS_CALL_AVAIL) |
+			   (ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT),
+		.arginfo = QCOM_SCM_ARGS(1),
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	enum qcom_scm_convention probed_convention;
+	int ret;
+	bool forced = false;
+
+	if (likely(qcom_scm_convention != SMC_CONVENTION_UNKNOWN))
+		return qcom_scm_convention;
+
+	/*
+	 * Per the "SMC calling convention specification", the 64-bit calling
+	 * convention can only be used when the client is 64-bit, otherwise
+	 * system will encounter the undefined behaviour.
+	 */
+#if IS_ENABLED(CONFIG_ARM64)
+	/*
+	 * Device isn't required as there is only one argument - no device
+	 * needed to dma_map_single to secure world
+	 */
+	probed_convention = SMC_CONVENTION_ARM_64;
+	ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
+	if (!ret && res.result[0] == 1)
+		goto found;
+
+	/*
+	 * Some SC7180 firmwares didn't implement the
+	 * QCOM_SCM_INFO_IS_CALL_AVAIL call, so we fallback to forcing ARM_64
+	 * calling conventions on these firmwares. Luckily we don't make any
+	 * early calls into the firmware on these SoCs so the device pointer
+	 * will be valid here to check if the compatible matches.
+	 */
+	if (of_device_is_compatible(__scm ? __scm->dev->of_node : NULL, "qcom,scm-sc7180")) {
+		forced = true;
+		goto found;
+	}
+#endif
+
+	probed_convention = SMC_CONVENTION_ARM_32;
+	ret = __scm_smc_call(NULL, &desc, probed_convention, &res, true);
+	if (!ret && res.result[0] == 1)
+		goto found;
+
+	probed_convention = SMC_CONVENTION_LEGACY;
+found:
+	spin_lock_irqsave(&scm_query_lock, flags);
+	if (probed_convention != qcom_scm_convention) {
+		qcom_scm_convention = probed_convention;
+		pr_info("qcom_scm: convention: %s%s\n",
+			qcom_scm_convention_names[qcom_scm_convention],
+			forced ? " (forced)" : "");
+	}
+	spin_unlock_irqrestore(&scm_query_lock, flags);
+
+	return qcom_scm_convention;
+}
+
+/**
+ * qcom_scm_call() - Invoke a syscall in the secure world
+ * @dev:	device
+ * @svc_id:	service identifier
+ * @cmd_id:	command identifier
+ * @desc:	Descriptor structure containing arguments and return values
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This should *only* be called in pre-emptible context.
+ */
+static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+			 struct qcom_scm_res *res)
+{
+	might_sleep();
+	switch (__get_convention()) {
+	case SMC_CONVENTION_ARM_32:
+	case SMC_CONVENTION_ARM_64:
+		return scm_smc_call(dev, desc, res, false);
+	case SMC_CONVENTION_LEGACY:
+		return scm_legacy_call(dev, desc, res);
+	default:
+		pr_err("Unknown current SCM calling convention.\n");
+		return -EINVAL;
+	}
+}
+
+/**
+ * qcom_scm_call_atomic() - atomic variation of qcom_scm_call()
+ * @dev:	device
+ * @svc_id:	service identifier
+ * @cmd_id:	command identifier
+ * @desc:	Descriptor structure containing arguments and return values
+ * @res:	Structure containing results from SMC/HVC call
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ * This can be called in atomic context.
+ */
+static int qcom_scm_call_atomic(struct device *dev,
+				const struct qcom_scm_desc *desc,
+				struct qcom_scm_res *res)
+{
+	switch (__get_convention()) {
+	case SMC_CONVENTION_ARM_32:
+	case SMC_CONVENTION_ARM_64:
+		return scm_smc_call(dev, desc, res, true);
+	case SMC_CONVENTION_LEGACY:
+		return scm_legacy_call_atomic(dev, desc, res);
+	default:
+		pr_err("Unknown current SCM calling convention.\n");
+		return -EINVAL;
+	}
+}
+
+static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+					 u32 cmd_id)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_INFO,
+		.cmd = QCOM_SCM_INFO_IS_CALL_AVAIL,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	desc.arginfo = QCOM_SCM_ARGS(1);
+	switch (__get_convention()) {
+	case SMC_CONVENTION_ARM_32:
+	case SMC_CONVENTION_ARM_64:
+		desc.args[0] = SCM_SMC_FNID(svc_id, cmd_id) |
+				(ARM_SMCCC_OWNER_SIP << ARM_SMCCC_OWNER_SHIFT);
+		break;
+	case SMC_CONVENTION_LEGACY:
+		desc.args[0] = SCM_LEGACY_FNID(svc_id, cmd_id);
+		break;
+	default:
+		pr_err("Unknown SMC convention being used\n");
+		return false;
+	}
+
+	ret = qcom_scm_call(dev, &desc, &res);
+
+	return ret ? false : !!res.result[0];
+}
+
+/**
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the Linux entry point for the SCM to transfer control to when coming
+ * out of a power down. CPU power down may be executed on cpuidle or hotplug.
+ */
+int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int ret;
+	int flags = 0;
+	int cpu;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_BOOT,
+		.cmd = QCOM_SCM_BOOT_SET_ADDR,
+		.arginfo = QCOM_SCM_ARGS(2),
+	};
+
+	/*
+	 * Reassign only if we are switching from hotplug entry point
+	 * to cpuidle entry point or vice versa.
+	 */
+	for_each_cpu(cpu, cpus) {
+		if (entry == qcom_scm_wb[cpu].entry)
+			continue;
+		flags |= qcom_scm_wb[cpu].flag;
+	}
+
+	/* No change in entry function */
+	if (!flags)
+		return 0;
+
+	desc.args[0] = flags;
+	desc.args[1] = virt_to_phys(entry);
+
+	ret = qcom_scm_call(__scm->dev, &desc, NULL);
+	if (!ret) {
+		for_each_cpu(cpu, cpus)
+			qcom_scm_wb[cpu].entry = entry;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
+
+/**
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * @entry: Entry point function for the cpus
+ * @cpus: The cpumask of cpus that will use the entry point
+ *
+ * Set the cold boot address of the cpus. Any cpu outside the supported
+ * range would be removed from the cpu present mask.
+ */
+int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+{
+	int flags = 0;
+	int cpu;
+	int scm_cb_flags[] = {
+		QCOM_SCM_FLAG_COLDBOOT_CPU0,
+		QCOM_SCM_FLAG_COLDBOOT_CPU1,
+		QCOM_SCM_FLAG_COLDBOOT_CPU2,
+		QCOM_SCM_FLAG_COLDBOOT_CPU3,
+	};
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_BOOT,
+		.cmd = QCOM_SCM_BOOT_SET_ADDR,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	if (!cpus || (cpus && cpumask_empty(cpus)))
+		return -EINVAL;
+
+	for_each_cpu(cpu, cpus) {
+		if (cpu < ARRAY_SIZE(scm_cb_flags))
+			flags |= scm_cb_flags[cpu];
+		else
+			set_cpu_present(cpu, false);
+	}
+
+	desc.args[0] = flags;
+	desc.args[1] = virt_to_phys(entry);
+
+	return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
+
+/**
+ * qcom_scm_cpu_power_down() - Power down the cpu
+ * @flags - Flags to flush cache
+ *
+ * This is an end point to power down cpu. If there was a pending interrupt,
+ * the control would return from this function, otherwise, the cpu jumps to the
+ * warm boot entry point set for this cpu upon reset.
+ */
+void qcom_scm_cpu_power_down(u32 flags)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_BOOT,
+		.cmd = QCOM_SCM_BOOT_TERMINATE_PC,
+		.args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_cpu_power_down);
+
+int qcom_scm_set_remote_state(u32 state, u32 id)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_BOOT,
+		.cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = state,
+		.args[1] = id,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_set_remote_state);
+
+static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_BOOT,
+		.cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+
+	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
+}
+
+static void qcom_scm_set_download_mode(bool enable)
+{
+	bool avail;
+	int ret = 0;
+
+	avail = __qcom_scm_is_call_available(__scm->dev,
+					     QCOM_SCM_SVC_BOOT,
+					     QCOM_SCM_BOOT_SET_DLOAD_MODE);
+	if (avail) {
+		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
+	} else if (__scm->dload_mode_addr) {
+		ret = qcom_scm_io_writel(__scm->dload_mode_addr,
+				enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+	} else {
+		dev_err(__scm->dev,
+			"No available mechanism for setting download mode\n");
+	}
+
+	if (ret)
+		dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
+}
+
+/**
+ * qcom_scm_pas_init_image() - Initialize peripheral authentication service
+ *			       state machine for a given peripheral, using the
+ *			       metadata
+ * @peripheral: peripheral id
+ * @metadata:	pointer to memory containing ELF header, program header table
+ *		and optional blob of data used for authenticating the metadata
+ *		and the rest of the firmware
+ * @size:	size of the metadata
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
+{
+	dma_addr_t mdata_phys;
+	void *mdata_buf;
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
+		.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	/*
+	 * During the scm call memory protection will be enabled for the meta
+	 * data blob, so make sure it's physically contiguous, 4K aligned and
+	 * non-cachable to avoid XPU violations.
+	 */
+	mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
+				       GFP_KERNEL);
+	if (!mdata_buf) {
+		dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
+		return -ENOMEM;
+	}
+	memcpy(mdata_buf, metadata, size);
+
+	ret = qcom_scm_clk_enable();
+	if (ret)
+		goto free_metadata;
+
+	desc.args[1] = mdata_phys;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	qcom_scm_clk_disable();
+
+free_metadata:
+	dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_init_image);
+
+/**
+ * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
+ *			      for firmware loading
+ * @peripheral:	peripheral id
+ * @addr:	start address of memory area to prepare
+ * @size:	size of the memory area to prepare
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
+		.arginfo = QCOM_SCM_ARGS(3),
+		.args[0] = peripheral,
+		.args[1] = addr,
+		.args[2] = size,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	ret = qcom_scm_clk_enable();
+	if (ret)
+		return ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+	qcom_scm_clk_disable();
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
+
+/**
+ * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
+ *				   and reset the remote processor
+ * @peripheral:	peripheral id
+ *
+ * Return 0 on success.
+ */
+int qcom_scm_pas_auth_and_reset(u32 peripheral)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	ret = qcom_scm_clk_enable();
+	if (ret)
+		return ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+	qcom_scm_clk_disable();
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
+
+/**
+ * qcom_scm_pas_shutdown() - Shut down the remote processor
+ * @peripheral: peripheral id
+ *
+ * Returns 0 on success.
+ */
+int qcom_scm_pas_shutdown(u32 peripheral)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	ret = qcom_scm_clk_enable();
+	if (ret)
+		return ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	qcom_scm_clk_disable();
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_shutdown);
+
+/**
+ * qcom_scm_pas_supported() - Check if the peripheral authentication service is
+ *			      available for the given peripherial
+ * @peripheral:	peripheral id
+ *
+ * Returns true if PAS is supported for this peripheral, otherwise false.
+ */
+bool qcom_scm_pas_supported(u32 peripheral)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = peripheral,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+					  QCOM_SCM_PIL_PAS_IS_SUPPORTED))
+		return false;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? false : !!res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_pas_supported);
+
+static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_PIL,
+		.cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = reset,
+		.args[1] = 0,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+
+static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
+				     unsigned long idx)
+{
+	if (idx != 0)
+		return -EINVAL;
+
+	return __qcom_scm_pas_mss_reset(__scm->dev, 1);
+}
+
+static int qcom_scm_pas_reset_deassert(struct reset_controller_dev *rcdev,
+				       unsigned long idx)
+{
+	if (idx != 0)
+		return -EINVAL;
+
+	return __qcom_scm_pas_mss_reset(__scm->dev, 0);
+}
+
+static const struct reset_control_ops qcom_scm_pas_reset_ops = {
+	.assert = qcom_scm_pas_reset_assert,
+	.deassert = qcom_scm_pas_reset_deassert,
+};
+
+int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_IO,
+		.cmd = QCOM_SCM_IO_READ,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = addr,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+
+	ret = qcom_scm_call_atomic(__scm->dev, &desc, &res);
+	if (ret >= 0)
+		*val = res.result[0];
+
+	return ret < 0 ? ret : 0;
+}
+EXPORT_SYMBOL(qcom_scm_io_readl);
+
+int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_IO,
+		.cmd = QCOM_SCM_IO_WRITE,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = addr,
+		.args[1] = val,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_io_writel);
+
+/**
+ * qcom_scm_restore_sec_cfg_available() - Check if secure environment
+ * supports restore security config interface.
+ *
+ * Return true if restore-cfg interface is supported, false if not.
+ */
+bool qcom_scm_restore_sec_cfg_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_MP,
+					    QCOM_SCM_MP_RESTORE_SEC_CFG);
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);
+
+int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = device_id,
+		.args[1] = spare,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
+
+int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = spare,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	if (size)
+		*size = res.result[0];
+
+	return ret ? : res.result[1];
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);
+
+int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
+		.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+					 QCOM_SCM_VAL),
+		.args[0] = addr,
+		.args[1] = size,
+		.args[2] = spare,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	int ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+	/* the pg table has been initialized already, ignore the error */
+	if (ret == -EPERM)
+		ret = 0;
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
+
+int qcom_scm_mem_protect_video_var(u32 cp_start, u32 cp_size,
+				   u32 cp_nonpixel_start,
+				   u32 cp_nonpixel_size)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_VIDEO_VAR,
+		.arginfo = QCOM_SCM_ARGS(4, QCOM_SCM_VAL, QCOM_SCM_VAL,
+					 QCOM_SCM_VAL, QCOM_SCM_VAL),
+		.args[0] = cp_start,
+		.args[1] = cp_size,
+		.args[2] = cp_nonpixel_start,
+		.args[3] = cp_nonpixel_size,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+EXPORT_SYMBOL(qcom_scm_mem_protect_video_var);
+
+static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+				 size_t mem_sz, phys_addr_t src, size_t src_sz,
+				 phys_addr_t dest, size_t dest_sz)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_MP,
+		.cmd = QCOM_SCM_MP_ASSIGN,
+		.arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
+					 QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
+					 QCOM_SCM_VAL, QCOM_SCM_VAL),
+		.args[0] = mem_region,
+		.args[1] = mem_sz,
+		.args[2] = src,
+		.args[3] = src_sz,
+		.args[4] = dest,
+		.args[5] = dest_sz,
+		.args[6] = 0,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	ret = qcom_scm_call(dev, &desc, &res);
+
+	return ret ? : res.result[0];
+}
+
+/**
+ * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
+ * @mem_addr: mem region whose ownership need to be reassigned
+ * @mem_sz:   size of the region.
+ * @srcvm:    vmid for current set of owners, each set bit in
+ *            flag indicate a unique owner
+ * @newvm:    array having new owners and corresponding permission
+ *            flags
+ * @dest_cnt: number of owners in next set.
+ *
+ * Return negative errno on failure or 0 on success with @srcvm updated.
+ */
+int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+			unsigned int *srcvm,
+			const struct qcom_scm_vmperm *newvm,
+			unsigned int dest_cnt)
+{
+	struct qcom_scm_current_perm_info *destvm;
+	struct qcom_scm_mem_map_info *mem_to_map;
+	phys_addr_t mem_to_map_phys;
+	phys_addr_t dest_phys;
+	dma_addr_t ptr_phys;
+	size_t mem_to_map_sz;
+	size_t dest_sz;
+	size_t src_sz;
+	size_t ptr_sz;
+	int next_vm;
+	__le32 *src;
+	void *ptr;
+	int ret, i, b;
+	unsigned long srcvm_bits = *srcvm;
+
+	src_sz = hweight_long(srcvm_bits) * sizeof(*src);
+	mem_to_map_sz = sizeof(*mem_to_map);
+	dest_sz = dest_cnt * sizeof(*destvm);
+	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
+			ALIGN(dest_sz, SZ_64);
+
+	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	/* Fill source vmid detail */
+	src = ptr;
+	i = 0;
+	for_each_set_bit(b, &srcvm_bits, BITS_PER_LONG)
+		src[i++] = cpu_to_le32(b);
+
+	/* Fill details of mem buff to map */
+	mem_to_map = ptr + ALIGN(src_sz, SZ_64);
+	mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
+	mem_to_map->mem_addr = cpu_to_le64(mem_addr);
+	mem_to_map->mem_size = cpu_to_le64(mem_sz);
+
+	next_vm = 0;
+	/* Fill details of next vmid detail */
+	destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	for (i = 0; i < dest_cnt; i++, destvm++, newvm++) {
+		destvm->vmid = cpu_to_le32(newvm->vmid);
+		destvm->perm = cpu_to_le32(newvm->perm);
+		destvm->ctx = 0;
+		destvm->ctx_size = 0;
+		next_vm |= BIT(newvm->vmid);
+	}
+
+	ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
+				    ptr_phys, src_sz, dest_phys, dest_sz);
+	dma_free_coherent(__scm->dev, ptr_sz, ptr, ptr_phys);
+	if (ret) {
+		dev_err(__scm->dev,
+			"Assign memory protection call failed %d\n", ret);
+		return -EINVAL;
+	}
+
+	*srcvm = next_vm;
+	return 0;
+}
+EXPORT_SYMBOL(qcom_scm_assign_mem);
+
+/**
+ * qcom_scm_ocmem_lock_available() - is OCMEM lock/unlock interface available
+ */
+bool qcom_scm_ocmem_lock_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_OCMEM,
+					    QCOM_SCM_OCMEM_LOCK_CMD);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);
+
+/**
+ * qcom_scm_ocmem_lock() - call OCMEM lock interface to assign an OCMEM
+ * region to the specified initiator
+ *
+ * @id:     tz initiator id
+ * @offset: OCMEM offset
+ * @size:   OCMEM size
+ * @mode:   access mode (WIDE/NARROW)
+ */
+int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
+			u32 mode)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_OCMEM,
+		.cmd = QCOM_SCM_OCMEM_LOCK_CMD,
+		.args[0] = id,
+		.args[1] = offset,
+		.args[2] = size,
+		.args[3] = mode,
+		.arginfo = QCOM_SCM_ARGS(4),
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_lock);
+
+/**
+ * qcom_scm_ocmem_unlock() - call OCMEM unlock interface to release an OCMEM
+ * region from the specified initiator
+ *
+ * @id:     tz initiator id
+ * @offset: OCMEM offset
+ * @size:   OCMEM size
+ */
+int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_OCMEM,
+		.cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
+		.args[0] = id,
+		.args[1] = offset,
+		.args[2] = size,
+		.arginfo = QCOM_SCM_ARGS(3),
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_ocmem_unlock);
+
+/**
+ * qcom_scm_ice_available() - Is the ICE key programming interface available?
+ *
+ * Return: true iff the SCM calls wrapped by qcom_scm_ice_invalidate_key() and
+ *	   qcom_scm_ice_set_key() are available.
+ */
+bool qcom_scm_ice_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES,
+					    QCOM_SCM_ES_INVALIDATE_ICE_KEY) &&
+		__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_ES,
+					     QCOM_SCM_ES_CONFIG_SET_ICE_KEY);
+}
+EXPORT_SYMBOL(qcom_scm_ice_available);
+
+/**
+ * qcom_scm_ice_invalidate_key() - Invalidate an inline encryption key
+ * @index: the keyslot to invalidate
+ *
+ * The UFSHCI standard defines a standard way to do this, but it doesn't work on
+ * these SoCs; only this SCM call does.
+ *
+ * Return: 0 on success; -errno on failure.
+ */
+int qcom_scm_ice_invalidate_key(u32 index)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_ES,
+		.cmd = QCOM_SCM_ES_INVALIDATE_ICE_KEY,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = index,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_ice_invalidate_key);
+
+/**
+ * qcom_scm_ice_set_key() - Set an inline encryption key
+ * @index: the keyslot into which to set the key
+ * @key: the key to program
+ * @key_size: the size of the key in bytes
+ * @cipher: the encryption algorithm the key is for
+ * @data_unit_size: the encryption data unit size, i.e. the size of each
+ *		    individual plaintext and ciphertext.  Given in 512-byte
+ *		    units, e.g. 1 = 512 bytes, 8 = 4096 bytes, etc.
+ *
+ * Program a key into a keyslot of Qualcomm ICE (Inline Crypto Engine), where it
+ * can then be used to encrypt/decrypt UFS I/O requests inline.
+ *
+ * The UFSHCI standard defines a standard way to do this, but it doesn't work on
+ * these SoCs; only this SCM call does.
+ *
+ * Return: 0 on success; -errno on failure.
+ */
+int qcom_scm_ice_set_key(u32 index, const u8 *key, u32 key_size,
+			 enum qcom_scm_ice_cipher cipher, u32 data_unit_size)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_ES,
+		.cmd = QCOM_SCM_ES_CONFIG_SET_ICE_KEY,
+		.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_VAL, QCOM_SCM_RW,
+					 QCOM_SCM_VAL, QCOM_SCM_VAL,
+					 QCOM_SCM_VAL),
+		.args[0] = index,
+		.args[2] = key_size,
+		.args[3] = cipher,
+		.args[4] = data_unit_size,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	void *keybuf;
+	dma_addr_t key_phys;
+	int ret;
+
+	/*
+	 * 'key' may point to vmalloc()'ed memory, but we need to pass a
+	 * physical address that's been properly flushed.  The sanctioned way to
+	 * do this is by using the DMA API.  But as is best practice for crypto
+	 * keys, we also must wipe the key after use.  This makes kmemdup() +
+	 * dma_map_single() not clearly correct, since the DMA API can use
+	 * bounce buffers.  Instead, just use dma_alloc_coherent().  Programming
+	 * keys is normally rare and thus not performance-critical.
+	 */
+
+	keybuf = dma_alloc_coherent(__scm->dev, key_size, &key_phys,
+				    GFP_KERNEL);
+	if (!keybuf)
+		return -ENOMEM;
+	memcpy(keybuf, key, key_size);
+	desc.args[1] = key_phys;
+
+	ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+	memzero_explicit(keybuf, key_size);
+
+	dma_free_coherent(__scm->dev, key_size, keybuf, key_phys);
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_ice_set_key);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+	bool avail;
+	int ret = qcom_scm_clk_enable();
+
+	if (ret)
+		return ret;
+
+	avail = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_HDCP,
+						QCOM_SCM_HDCP_INVOKE);
+
+	qcom_scm_clk_disable();
+
+	return avail;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+	int ret;
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_HDCP,
+		.cmd = QCOM_SCM_HDCP_INVOKE,
+		.arginfo = QCOM_SCM_ARGS(10),
+		.args = {
+			req[0].addr,
+			req[0].val,
+			req[1].addr,
+			req[1].val,
+			req[2].addr,
+			req[2].val,
+			req[3].addr,
+			req[3].val,
+			req[4].addr,
+			req[4].val
+		},
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+	struct qcom_scm_res res;
+
+	if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+		return -ERANGE;
+
+	ret = qcom_scm_clk_enable();
+	if (ret)
+		return ret;
+
+	ret = qcom_scm_call(__scm->dev, &desc, &res);
+	*resp = res.result[0];
+
+	qcom_scm_clk_disable();
+
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
+
+int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+		.cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
+		.arginfo = QCOM_SCM_ARGS(2),
+		.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL,
+		.args[1] = en,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+
+	return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+
+static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
+{
+	struct device_node *tcsr;
+	struct device_node *np = dev->of_node;
+	struct resource res;
+	u32 offset;
+	int ret;
+
+	tcsr = of_parse_phandle(np, "qcom,dload-mode", 0);
+	if (!tcsr)
+		return 0;
+
+	ret = of_address_to_resource(tcsr, 0, &res);
+	of_node_put(tcsr);
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32_index(np, "qcom,dload-mode", 1, &offset);
+	if (ret < 0)
+		return ret;
+
+	*addr = res.start + offset;
+
+	return 0;
+}
+
+/**
+ * qcom_scm_is_available() - Checks if SCM is available
+ */
+bool qcom_scm_is_available(void)
+{
+	return !!__scm;
+}
+EXPORT_SYMBOL(qcom_scm_is_available);
+
+static int qcom_scm_probe(struct platform_device *pdev)
+{
+	struct qcom_scm *scm;
+	unsigned long clks;
+	int ret;
+
+	scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
+	if (!scm)
+		return -ENOMEM;
+
+	ret = qcom_scm_find_dload_address(&pdev->dev, &scm->dload_mode_addr);
+	if (ret < 0)
+		return ret;
+
+	clks = (unsigned long)of_device_get_match_data(&pdev->dev);
+
+	scm->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(scm->core_clk)) {
+		if (PTR_ERR(scm->core_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->core_clk);
+
+		if (clks & SCM_HAS_CORE_CLK) {
+			dev_err(&pdev->dev, "failed to acquire core clk\n");
+			return PTR_ERR(scm->core_clk);
+		}
+
+		scm->core_clk = NULL;
+	}
+
+	scm->iface_clk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(scm->iface_clk)) {
+		if (PTR_ERR(scm->iface_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->iface_clk);
+
+		if (clks & SCM_HAS_IFACE_CLK) {
+			dev_err(&pdev->dev, "failed to acquire iface clk\n");
+			return PTR_ERR(scm->iface_clk);
+		}
+
+		scm->iface_clk = NULL;
+	}
+
+	scm->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(scm->bus_clk)) {
+		if (PTR_ERR(scm->bus_clk) == -EPROBE_DEFER)
+			return PTR_ERR(scm->bus_clk);
+
+		if (clks & SCM_HAS_BUS_CLK) {
+			dev_err(&pdev->dev, "failed to acquire bus clk\n");
+			return PTR_ERR(scm->bus_clk);
+		}
+
+		scm->bus_clk = NULL;
+	}
+
+	scm->reset.ops = &qcom_scm_pas_reset_ops;
+	scm->reset.nr_resets = 1;
+	scm->reset.of_node = pdev->dev.of_node;
+	ret = devm_reset_controller_register(&pdev->dev, &scm->reset);
+	if (ret)
+		return ret;
+
+	/* vote for max clk rate for highest performance */
+	ret = clk_set_rate(scm->core_clk, INT_MAX);
+	if (ret)
+		return ret;
+
+	__scm = scm;
+	__scm->dev = &pdev->dev;
+
+	__get_convention();
+
+	/*
+	 * If requested enable "download mode", from this point on warmboot
+	 * will cause the the boot stages to enter download mode, unless
+	 * disabled below by a clean shutdown/reboot.
+	 */
+	if (download_mode)
+		qcom_scm_set_download_mode(true);
+
+	return 0;
+}
+
+static void qcom_scm_shutdown(struct platform_device *pdev)
+{
+	/* Clean shutdown, disable download mode to allow normal restart */
+	qcom_scm_set_download_mode(false);
+}
+
+static const struct of_device_id qcom_scm_dt_match[] = {
+	{ .compatible = "qcom,scm-apq8064",
+	  /* FIXME: This should have .data = (void *) SCM_HAS_CORE_CLK */
+	},
+	{ .compatible = "qcom,scm-apq8084", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
+	},
+	{ .compatible = "qcom,scm-ipq4019" },
+	{ .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK },
+	{ .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK },
+	{ .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
+	},
+	{ .compatible = "qcom,scm-msm8974", .data = (void *)(SCM_HAS_CORE_CLK |
+							     SCM_HAS_IFACE_CLK |
+							     SCM_HAS_BUS_CLK)
+	},
+	{ .compatible = "qcom,scm-msm8994" },
+	{ .compatible = "qcom,scm-msm8996" },
+	{ .compatible = "qcom,scm" },
+	{}
+};
+
+static struct platform_driver qcom_scm_driver = {
+	.driver = {
+		.name	= "qcom_scm",
+		.of_match_table = qcom_scm_dt_match,
+	},
+	.probe = qcom_scm_probe,
+	.shutdown = qcom_scm_shutdown,
+};
+
+static int __init qcom_scm_init(void)
+{
+	return platform_driver_register(&qcom_scm_driver);
+}
+subsys_initcall(qcom_scm_init);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
new file mode 100644
index 000000000..632fe3142
--- /dev/null
+++ b/drivers/firmware/qcom_scm.h
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2010-2015,2019 The Linux Foundation. All rights reserved.
+ */
+#ifndef __QCOM_SCM_INT_H
+#define __QCOM_SCM_INT_H
+
+enum qcom_scm_convention {
+	SMC_CONVENTION_UNKNOWN,
+	SMC_CONVENTION_LEGACY,
+	SMC_CONVENTION_ARM_32,
+	SMC_CONVENTION_ARM_64,
+};
+
+extern enum qcom_scm_convention qcom_scm_convention;
+
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+	QCOM_SCM_VAL,
+	QCOM_SCM_RO,
+	QCOM_SCM_RW,
+	QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+			   (((a) & 0x3) << 4) | \
+			   (((b) & 0x3) << 6) | \
+			   (((c) & 0x3) << 8) | \
+			   (((d) & 0x3) << 10) | \
+			   (((e) & 0x3) << 12) | \
+			   (((f) & 0x3) << 14) | \
+			   (((g) & 0x3) << 16) | \
+			   (((h) & 0x3) << 18) | \
+			   (((i) & 0x3) << 20) | \
+			   (((j) & 0x3) << 22) | \
+			   ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo:	Metadata describing the arguments in args[]
+ * @args:	The array of arguments for the secure syscall
+ */
+struct qcom_scm_desc {
+	u32 svc;
+	u32 cmd;
+	u32 arginfo;
+	u64 args[MAX_QCOM_SCM_ARGS];
+	u32 owner;
+};
+
+/**
+ * struct qcom_scm_res
+ * @result:	The values returned by the secure syscall
+ */
+struct qcom_scm_res {
+	u64 result[MAX_QCOM_SCM_RETS];
+};
+
+#define SCM_SMC_FNID(s, c)	((((s) & 0xFF) << 8) | ((c) & 0xFF))
+extern int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
+			  enum qcom_scm_convention qcom_convention,
+			  struct qcom_scm_res *res, bool atomic);
+#define scm_smc_call(dev, desc, res, atomic) \
+	__scm_smc_call((dev), (desc), qcom_scm_convention, (res), (atomic))
+
+#define SCM_LEGACY_FNID(s, c)	(((s) << 10) | ((c) & 0x3ff))
+extern int scm_legacy_call_atomic(struct device *dev,
+				  const struct qcom_scm_desc *desc,
+				  struct qcom_scm_res *res);
+extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
+			   struct qcom_scm_res *res);
+
+#define QCOM_SCM_SVC_BOOT		0x01
+#define QCOM_SCM_BOOT_SET_ADDR		0x01
+#define QCOM_SCM_BOOT_TERMINATE_PC	0x02
+#define QCOM_SCM_BOOT_SET_DLOAD_MODE	0x10
+#define QCOM_SCM_BOOT_SET_REMOTE_STATE	0x0a
+#define QCOM_SCM_FLUSH_FLAG_MASK	0x3
+
+#define QCOM_SCM_SVC_PIL		0x02
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE	0x01
+#define QCOM_SCM_PIL_PAS_MEM_SETUP	0x02
+#define QCOM_SCM_PIL_PAS_AUTH_AND_RESET	0x05
+#define QCOM_SCM_PIL_PAS_SHUTDOWN	0x06
+#define QCOM_SCM_PIL_PAS_IS_SUPPORTED	0x07
+#define QCOM_SCM_PIL_PAS_MSS_RESET	0x0a
+
+#define QCOM_SCM_SVC_IO			0x05
+#define QCOM_SCM_IO_READ		0x01
+#define QCOM_SCM_IO_WRITE		0x02
+
+#define QCOM_SCM_SVC_INFO		0x06
+#define QCOM_SCM_INFO_IS_CALL_AVAIL	0x01
+
+#define QCOM_SCM_SVC_MP				0x0c
+#define QCOM_SCM_MP_RESTORE_SEC_CFG		0x02
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE	0x03
+#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT	0x04
+#define QCOM_SCM_MP_VIDEO_VAR			0x08
+#define QCOM_SCM_MP_ASSIGN			0x16
+
+#define QCOM_SCM_SVC_OCMEM		0x0f
+#define QCOM_SCM_OCMEM_LOCK_CMD		0x01
+#define QCOM_SCM_OCMEM_UNLOCK_CMD	0x02
+
+#define QCOM_SCM_SVC_ES			0x10	/* Enterprise Security */
+#define QCOM_SCM_ES_INVALIDATE_ICE_KEY	0x03
+#define QCOM_SCM_ES_CONFIG_SET_ICE_KEY	0x04
+
+#define QCOM_SCM_SVC_HDCP		0x11
+#define QCOM_SCM_HDCP_INVOKE		0x01
+
+#define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
+#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
+
+extern void __qcom_scm_init(void);
+
+/* common error codes */
+#define QCOM_SCM_V2_EBUSY	-12
+#define QCOM_SCM_ENOMEM		-5
+#define QCOM_SCM_EOPNOTSUPP	-4
+#define QCOM_SCM_EINVAL_ADDR	-3
+#define QCOM_SCM_EINVAL_ARG	-2
+#define QCOM_SCM_ERROR		-1
+#define QCOM_SCM_INTERRUPTED	1
+
+static inline int qcom_scm_remap_error(int err)
+{
+	switch (err) {
+	case QCOM_SCM_ERROR:
+		return -EIO;
+	case QCOM_SCM_EINVAL_ADDR:
+	case QCOM_SCM_EINVAL_ARG:
+		return -EINVAL;
+	case QCOM_SCM_EOPNOTSUPP:
+		return -EOPNOTSUPP;
+	case QCOM_SCM_ENOMEM:
+		return -ENOMEM;
+	case QCOM_SCM_V2_EBUSY:
+		return -EBUSY;
+	}
+	return -EINVAL;
+}
+
+#endif
diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c
new file mode 100644
index 000000000..f08e056ed
--- /dev/null
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -0,0 +1,938 @@
+/*
+ * drivers/firmware/qemu_fw_cfg.c
+ *
+ * Copyright 2015 Carnegie Mellon University
+ *
+ * Expose entries from QEMU's firmware configuration (fw_cfg) device in
+ * sysfs (read-only, under "/sys/firmware/qemu_fw_cfg/...").
+ *
+ * The fw_cfg device may be instantiated via either an ACPI node (on x86
+ * and select subsets of aarch64), a Device Tree node (on arm), or using
+ * a kernel module (or command line) parameter with the following syntax:
+ *
+ *      [qemu_fw_cfg.]ioport=<size>@<base>[:<ctrl_off>:<data_off>[:<dma_off>]]
+ * or
+ *      [qemu_fw_cfg.]mmio=<size>@<base>[:<ctrl_off>:<data_off>[:<dma_off>]]
+ *
+ * where:
+ *      <size>     := size of ioport or mmio range
+ *      <base>     := physical base address of ioport or mmio range
+ *      <ctrl_off> := (optional) offset of control register
+ *      <data_off> := (optional) offset of data register
+ *      <dma_off> := (optional) offset of dma register
+ *
+ * e.g.:
+ *      qemu_fw_cfg.ioport=12@0x510:0:1:4	(the default on x86)
+ * or
+ *      qemu_fw_cfg.mmio=16@0x9020000:8:0:16	(the default on arm)
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <uapi/linux/qemu_fw_cfg.h>
+#include <linux/delay.h>
+#include <linux/crash_dump.h>
+#include <linux/crash_core.h>
+
+MODULE_AUTHOR("Gabriel L. Somlo <somlo@cmu.edu>");
+MODULE_DESCRIPTION("QEMU fw_cfg sysfs support");
+MODULE_LICENSE("GPL");
+
+/* fw_cfg revision attribute, in /sys/firmware/qemu_fw_cfg top-level dir. */
+static u32 fw_cfg_rev;
+
+/* fw_cfg device i/o register addresses */
+static bool fw_cfg_is_mmio;
+static phys_addr_t fw_cfg_p_base;
+static resource_size_t fw_cfg_p_size;
+static void __iomem *fw_cfg_dev_base;
+static void __iomem *fw_cfg_reg_ctrl;
+static void __iomem *fw_cfg_reg_data;
+static void __iomem *fw_cfg_reg_dma;
+
+/* atomic access to fw_cfg device (potentially slow i/o, so using mutex) */
+static DEFINE_MUTEX(fw_cfg_dev_lock);
+
+/* pick appropriate endianness for selector key */
+static void fw_cfg_sel_endianness(u16 key)
+{
+	if (fw_cfg_is_mmio)
+		iowrite16be(key, fw_cfg_reg_ctrl);
+	else
+		iowrite16(key, fw_cfg_reg_ctrl);
+}
+
+#ifdef CONFIG_CRASH_CORE
+static inline bool fw_cfg_dma_enabled(void)
+{
+	return (fw_cfg_rev & FW_CFG_VERSION_DMA) && fw_cfg_reg_dma;
+}
+
+/* qemu fw_cfg device is sync today, but spec says it may become async */
+static void fw_cfg_wait_for_control(struct fw_cfg_dma_access *d)
+{
+	for (;;) {
+		u32 ctrl = be32_to_cpu(READ_ONCE(d->control));
+
+		/* do not reorder the read to d->control */
+		rmb();
+		if ((ctrl & ~FW_CFG_DMA_CTL_ERROR) == 0)
+			return;
+
+		cpu_relax();
+	}
+}
+
+static ssize_t fw_cfg_dma_transfer(void *address, u32 length, u32 control)
+{
+	phys_addr_t dma;
+	struct fw_cfg_dma_access *d = NULL;
+	ssize_t ret = length;
+
+	d = kmalloc(sizeof(*d), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	/* fw_cfg device does not need IOMMU protection, so use physical addresses */
+	*d = (struct fw_cfg_dma_access) {
+		.address = cpu_to_be64(address ? virt_to_phys(address) : 0),
+		.length = cpu_to_be32(length),
+		.control = cpu_to_be32(control)
+	};
+
+	dma = virt_to_phys(d);
+
+	iowrite32be((u64)dma >> 32, fw_cfg_reg_dma);
+	/* force memory to sync before notifying device via MMIO */
+	wmb();
+	iowrite32be(dma, fw_cfg_reg_dma + 4);
+
+	fw_cfg_wait_for_control(d);
+
+	if (be32_to_cpu(READ_ONCE(d->control)) & FW_CFG_DMA_CTL_ERROR) {
+		ret = -EIO;
+	}
+
+end:
+	kfree(d);
+
+	return ret;
+}
+#endif
+
+/* read chunk of given fw_cfg blob (caller responsible for sanity-check) */
+static ssize_t fw_cfg_read_blob(u16 key,
+				void *buf, loff_t pos, size_t count)
+{
+	u32 glk = -1U;
+	acpi_status status;
+
+	/* If we have ACPI, ensure mutual exclusion against any potential
+	 * device access by the firmware, e.g. via AML methods:
+	 */
+	status = acpi_acquire_global_lock(ACPI_WAIT_FOREVER, &glk);
+	if (ACPI_FAILURE(status) && status != AE_NOT_CONFIGURED) {
+		/* Should never get here */
+		WARN(1, "fw_cfg_read_blob: Failed to lock ACPI!\n");
+		memset(buf, 0, count);
+		return -EINVAL;
+	}
+
+	mutex_lock(&fw_cfg_dev_lock);
+	fw_cfg_sel_endianness(key);
+	while (pos-- > 0)
+		ioread8(fw_cfg_reg_data);
+	ioread8_rep(fw_cfg_reg_data, buf, count);
+	mutex_unlock(&fw_cfg_dev_lock);
+
+	acpi_release_global_lock(glk);
+	return count;
+}
+
+#ifdef CONFIG_CRASH_CORE
+/* write chunk of given fw_cfg blob (caller responsible for sanity-check) */
+static ssize_t fw_cfg_write_blob(u16 key,
+				 void *buf, loff_t pos, size_t count)
+{
+	u32 glk = -1U;
+	acpi_status status;
+	ssize_t ret = count;
+
+	/* If we have ACPI, ensure mutual exclusion against any potential
+	 * device access by the firmware, e.g. via AML methods:
+	 */
+	status = acpi_acquire_global_lock(ACPI_WAIT_FOREVER, &glk);
+	if (ACPI_FAILURE(status) && status != AE_NOT_CONFIGURED) {
+		/* Should never get here */
+		WARN(1, "%s: Failed to lock ACPI!\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&fw_cfg_dev_lock);
+	if (pos == 0) {
+		ret = fw_cfg_dma_transfer(buf, count, key << 16
+					  | FW_CFG_DMA_CTL_SELECT
+					  | FW_CFG_DMA_CTL_WRITE);
+	} else {
+		fw_cfg_sel_endianness(key);
+		ret = fw_cfg_dma_transfer(NULL, pos, FW_CFG_DMA_CTL_SKIP);
+		if (ret < 0)
+			goto end;
+		ret = fw_cfg_dma_transfer(buf, count, FW_CFG_DMA_CTL_WRITE);
+	}
+
+end:
+	mutex_unlock(&fw_cfg_dev_lock);
+
+	acpi_release_global_lock(glk);
+
+	return ret;
+}
+#endif /* CONFIG_CRASH_CORE */
+
+/* clean up fw_cfg device i/o */
+static void fw_cfg_io_cleanup(void)
+{
+	if (fw_cfg_is_mmio) {
+		iounmap(fw_cfg_dev_base);
+		release_mem_region(fw_cfg_p_base, fw_cfg_p_size);
+	} else {
+		ioport_unmap(fw_cfg_dev_base);
+		release_region(fw_cfg_p_base, fw_cfg_p_size);
+	}
+}
+
+/* arch-specific ctrl & data register offsets are not available in ACPI, DT */
+#if !(defined(FW_CFG_CTRL_OFF) && defined(FW_CFG_DATA_OFF))
+# if (defined(CONFIG_ARM) || defined(CONFIG_ARM64))
+#  define FW_CFG_CTRL_OFF 0x08
+#  define FW_CFG_DATA_OFF 0x00
+#  define FW_CFG_DMA_OFF 0x10
+# elif defined(CONFIG_PARISC)	/* parisc */
+#  define FW_CFG_CTRL_OFF 0x00
+#  define FW_CFG_DATA_OFF 0x04
+# elif (defined(CONFIG_PPC_PMAC) || defined(CONFIG_SPARC32)) /* ppc/mac,sun4m */
+#  define FW_CFG_CTRL_OFF 0x00
+#  define FW_CFG_DATA_OFF 0x02
+# elif (defined(CONFIG_X86) || defined(CONFIG_SPARC64)) /* x86, sun4u */
+#  define FW_CFG_CTRL_OFF 0x00
+#  define FW_CFG_DATA_OFF 0x01
+#  define FW_CFG_DMA_OFF 0x04
+# else
+#  error "QEMU FW_CFG not available on this architecture!"
+# endif
+#endif
+
+/* initialize fw_cfg device i/o from platform data */
+static int fw_cfg_do_platform_probe(struct platform_device *pdev)
+{
+	char sig[FW_CFG_SIG_SIZE];
+	struct resource *range, *ctrl, *data, *dma;
+
+	/* acquire i/o range details */
+	fw_cfg_is_mmio = false;
+	range = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!range) {
+		fw_cfg_is_mmio = true;
+		range = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!range)
+			return -EINVAL;
+	}
+	fw_cfg_p_base = range->start;
+	fw_cfg_p_size = resource_size(range);
+
+	if (fw_cfg_is_mmio) {
+		if (!request_mem_region(fw_cfg_p_base,
+					fw_cfg_p_size, "fw_cfg_mem"))
+			return -EBUSY;
+		fw_cfg_dev_base = ioremap(fw_cfg_p_base, fw_cfg_p_size);
+		if (!fw_cfg_dev_base) {
+			release_mem_region(fw_cfg_p_base, fw_cfg_p_size);
+			return -EFAULT;
+		}
+	} else {
+		if (!request_region(fw_cfg_p_base,
+				    fw_cfg_p_size, "fw_cfg_io"))
+			return -EBUSY;
+		fw_cfg_dev_base = ioport_map(fw_cfg_p_base, fw_cfg_p_size);
+		if (!fw_cfg_dev_base) {
+			release_region(fw_cfg_p_base, fw_cfg_p_size);
+			return -EFAULT;
+		}
+	}
+
+	/* were custom register offsets provided (e.g. on the command line)? */
+	ctrl = platform_get_resource_byname(pdev, IORESOURCE_REG, "ctrl");
+	data = platform_get_resource_byname(pdev, IORESOURCE_REG, "data");
+	dma = platform_get_resource_byname(pdev, IORESOURCE_REG, "dma");
+	if (ctrl && data) {
+		fw_cfg_reg_ctrl = fw_cfg_dev_base + ctrl->start;
+		fw_cfg_reg_data = fw_cfg_dev_base + data->start;
+	} else {
+		/* use architecture-specific offsets */
+		fw_cfg_reg_ctrl = fw_cfg_dev_base + FW_CFG_CTRL_OFF;
+		fw_cfg_reg_data = fw_cfg_dev_base + FW_CFG_DATA_OFF;
+	}
+
+	if (dma)
+		fw_cfg_reg_dma = fw_cfg_dev_base + dma->start;
+#ifdef FW_CFG_DMA_OFF
+	else
+		fw_cfg_reg_dma = fw_cfg_dev_base + FW_CFG_DMA_OFF;
+#endif
+
+	/* verify fw_cfg device signature */
+	if (fw_cfg_read_blob(FW_CFG_SIGNATURE, sig,
+				0, FW_CFG_SIG_SIZE) < 0 ||
+		memcmp(sig, "QEMU", FW_CFG_SIG_SIZE) != 0) {
+		fw_cfg_io_cleanup();
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static ssize_t fw_cfg_showrev(struct kobject *k, struct kobj_attribute *a,
+			      char *buf)
+{
+	return sprintf(buf, "%u\n", fw_cfg_rev);
+}
+
+static const struct kobj_attribute fw_cfg_rev_attr = {
+	.attr = { .name = "rev", .mode = S_IRUSR },
+	.show = fw_cfg_showrev,
+};
+
+/* fw_cfg_sysfs_entry type */
+struct fw_cfg_sysfs_entry {
+	struct kobject kobj;
+	u32 size;
+	u16 select;
+	char name[FW_CFG_MAX_FILE_PATH];
+	struct list_head list;
+};
+
+#ifdef CONFIG_CRASH_CORE
+static ssize_t fw_cfg_write_vmcoreinfo(const struct fw_cfg_file *f)
+{
+	static struct fw_cfg_vmcoreinfo *data;
+	ssize_t ret;
+
+	data = kmalloc(sizeof(struct fw_cfg_vmcoreinfo), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	*data = (struct fw_cfg_vmcoreinfo) {
+		.guest_format = cpu_to_le16(FW_CFG_VMCOREINFO_FORMAT_ELF),
+		.size = cpu_to_le32(VMCOREINFO_NOTE_SIZE),
+		.paddr = cpu_to_le64(paddr_vmcoreinfo_note())
+	};
+	/* spare ourself reading host format support for now since we
+	 * don't know what else to format - host may ignore ours
+	 */
+	ret = fw_cfg_write_blob(be16_to_cpu(f->select), data,
+				0, sizeof(struct fw_cfg_vmcoreinfo));
+
+	kfree(data);
+	return ret;
+}
+#endif /* CONFIG_CRASH_CORE */
+
+/* get fw_cfg_sysfs_entry from kobject member */
+static inline struct fw_cfg_sysfs_entry *to_entry(struct kobject *kobj)
+{
+	return container_of(kobj, struct fw_cfg_sysfs_entry, kobj);
+}
+
+/* fw_cfg_sysfs_attribute type */
+struct fw_cfg_sysfs_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct fw_cfg_sysfs_entry *entry, char *buf);
+};
+
+/* get fw_cfg_sysfs_attribute from attribute member */
+static inline struct fw_cfg_sysfs_attribute *to_attr(struct attribute *attr)
+{
+	return container_of(attr, struct fw_cfg_sysfs_attribute, attr);
+}
+
+/* global cache of fw_cfg_sysfs_entry objects */
+static LIST_HEAD(fw_cfg_entry_cache);
+
+/* kobjects removed lazily by kernel, mutual exclusion needed */
+static DEFINE_SPINLOCK(fw_cfg_cache_lock);
+
+static inline void fw_cfg_sysfs_cache_enlist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_add_tail(&entry->list, &fw_cfg_entry_cache);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static inline void fw_cfg_sysfs_cache_delist(struct fw_cfg_sysfs_entry *entry)
+{
+	spin_lock(&fw_cfg_cache_lock);
+	list_del(&entry->list);
+	spin_unlock(&fw_cfg_cache_lock);
+}
+
+static void fw_cfg_sysfs_cache_cleanup(void)
+{
+	struct fw_cfg_sysfs_entry *entry, *next;
+
+	list_for_each_entry_safe(entry, next, &fw_cfg_entry_cache, list) {
+		fw_cfg_sysfs_cache_delist(entry);
+		kobject_put(&entry->kobj);
+	}
+}
+
+/* default_attrs: per-entry attributes and show methods */
+
+#define FW_CFG_SYSFS_ATTR(_attr) \
+struct fw_cfg_sysfs_attribute fw_cfg_sysfs_attr_##_attr = { \
+	.attr = { .name = __stringify(_attr), .mode = S_IRUSR }, \
+	.show = fw_cfg_sysfs_show_##_attr, \
+}
+
+static ssize_t fw_cfg_sysfs_show_size(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->size);
+}
+
+static ssize_t fw_cfg_sysfs_show_key(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%u\n", e->select);
+}
+
+static ssize_t fw_cfg_sysfs_show_name(struct fw_cfg_sysfs_entry *e, char *buf)
+{
+	return sprintf(buf, "%s\n", e->name);
+}
+
+static FW_CFG_SYSFS_ATTR(size);
+static FW_CFG_SYSFS_ATTR(key);
+static FW_CFG_SYSFS_ATTR(name);
+
+static struct attribute *fw_cfg_sysfs_entry_attrs[] = {
+	&fw_cfg_sysfs_attr_size.attr,
+	&fw_cfg_sysfs_attr_key.attr,
+	&fw_cfg_sysfs_attr_name.attr,
+	NULL,
+};
+
+/* sysfs_ops: find fw_cfg_[entry, attribute] and call appropriate show method */
+static ssize_t fw_cfg_sysfs_attr_show(struct kobject *kobj, struct attribute *a,
+				      char *buf)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+	struct fw_cfg_sysfs_attribute *attr = to_attr(a);
+
+	return attr->show(entry, buf);
+}
+
+static const struct sysfs_ops fw_cfg_sysfs_attr_ops = {
+	.show = fw_cfg_sysfs_attr_show,
+};
+
+/* release: destructor, to be called via kobject_put() */
+static void fw_cfg_sysfs_release_entry(struct kobject *kobj)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	kfree(entry);
+}
+
+/* kobj_type: ties together all properties required to register an entry */
+static struct kobj_type fw_cfg_sysfs_entry_ktype = {
+	.default_attrs = fw_cfg_sysfs_entry_attrs,
+	.sysfs_ops = &fw_cfg_sysfs_attr_ops,
+	.release = fw_cfg_sysfs_release_entry,
+};
+
+/* raw-read method and attribute */
+static ssize_t fw_cfg_sysfs_read_raw(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buf, loff_t pos, size_t count)
+{
+	struct fw_cfg_sysfs_entry *entry = to_entry(kobj);
+
+	if (pos > entry->size)
+		return -EINVAL;
+
+	if (count > entry->size - pos)
+		count = entry->size - pos;
+
+	return fw_cfg_read_blob(entry->select, buf, pos, count);
+}
+
+static struct bin_attribute fw_cfg_sysfs_attr_raw = {
+	.attr = { .name = "raw", .mode = S_IRUSR },
+	.read = fw_cfg_sysfs_read_raw,
+};
+
+/*
+ * Create a kset subdirectory matching each '/' delimited dirname token
+ * in 'name', starting with sysfs kset/folder 'dir'; At the end, create
+ * a symlink directed at the given 'target'.
+ * NOTE: We do this on a best-effort basis, since 'name' is not guaranteed
+ * to be a well-behaved path name. Whenever a symlink vs. kset directory
+ * name collision occurs, the kernel will issue big scary warnings while
+ * refusing to add the offending link or directory. We follow up with our
+ * own, slightly less scary error messages explaining the situation :)
+ */
+static int fw_cfg_build_symlink(struct kset *dir,
+				struct kobject *target, const char *name)
+{
+	int ret;
+	struct kset *subdir;
+	struct kobject *ko;
+	char *name_copy, *p, *tok;
+
+	if (!dir || !target || !name || !*name)
+		return -EINVAL;
+
+	/* clone a copy of name for parsing */
+	name_copy = p = kstrdup(name, GFP_KERNEL);
+	if (!name_copy)
+		return -ENOMEM;
+
+	/* create folders for each dirname token, then symlink for basename */
+	while ((tok = strsep(&p, "/")) && *tok) {
+
+		/* last (basename) token? If so, add symlink here */
+		if (!p || !*p) {
+			ret = sysfs_create_link(&dir->kobj, target, tok);
+			break;
+		}
+
+		/* does the current dir contain an item named after tok ? */
+		ko = kset_find_obj(dir, tok);
+		if (ko) {
+			/* drop reference added by kset_find_obj */
+			kobject_put(ko);
+
+			/* ko MUST be a kset - we're about to use it as one ! */
+			if (ko->ktype != dir->kobj.ktype) {
+				ret = -EINVAL;
+				break;
+			}
+
+			/* descend into already existing subdirectory */
+			dir = to_kset(ko);
+		} else {
+			/* create new subdirectory kset */
+			subdir = kzalloc(sizeof(struct kset), GFP_KERNEL);
+			if (!subdir) {
+				ret = -ENOMEM;
+				break;
+			}
+			subdir->kobj.kset = dir;
+			subdir->kobj.ktype = dir->kobj.ktype;
+			ret = kobject_set_name(&subdir->kobj, "%s", tok);
+			if (ret) {
+				kfree(subdir);
+				break;
+			}
+			ret = kset_register(subdir);
+			if (ret) {
+				kfree(subdir);
+				break;
+			}
+
+			/* descend into newly created subdirectory */
+			dir = subdir;
+		}
+	}
+
+	/* we're done with cloned copy of name */
+	kfree(name_copy);
+	return ret;
+}
+
+/* recursively unregister fw_cfg/by_name/ kset directory tree */
+static void fw_cfg_kset_unregister_recursive(struct kset *kset)
+{
+	struct kobject *k, *next;
+
+	list_for_each_entry_safe(k, next, &kset->list, entry)
+		/* all set members are ksets too, but check just in case... */
+		if (k->ktype == kset->kobj.ktype)
+			fw_cfg_kset_unregister_recursive(to_kset(k));
+
+	/* symlinks are cleanly and automatically removed with the directory */
+	kset_unregister(kset);
+}
+
+/* kobjects & kset representing top-level, by_key, and by_name folders */
+static struct kobject *fw_cfg_top_ko;
+static struct kobject *fw_cfg_sel_ko;
+static struct kset *fw_cfg_fname_kset;
+
+/* register an individual fw_cfg file */
+static int fw_cfg_register_file(const struct fw_cfg_file *f)
+{
+	int err;
+	struct fw_cfg_sysfs_entry *entry;
+
+#ifdef CONFIG_CRASH_CORE
+	if (fw_cfg_dma_enabled() &&
+		strcmp(f->name, FW_CFG_VMCOREINFO_FILENAME) == 0 &&
+		!is_kdump_kernel()) {
+		if (fw_cfg_write_vmcoreinfo(f) < 0)
+			pr_warn("fw_cfg: failed to write vmcoreinfo");
+	}
+#endif
+
+	/* allocate new entry */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	/* set file entry information */
+	entry->size = be32_to_cpu(f->size);
+	entry->select = be16_to_cpu(f->select);
+	strscpy(entry->name, f->name, FW_CFG_MAX_FILE_PATH);
+
+	/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
+	err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
+				   fw_cfg_sel_ko, "%d", entry->select);
+	if (err)
+		goto err_put_entry;
+
+	/* add raw binary content access */
+	err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
+	if (err)
+		goto err_del_entry;
+
+	/* try adding "/sys/firmware/qemu_fw_cfg/by_name/" symlink */
+	fw_cfg_build_symlink(fw_cfg_fname_kset, &entry->kobj, entry->name);
+
+	/* success, add entry to global cache */
+	fw_cfg_sysfs_cache_enlist(entry);
+	return 0;
+
+err_del_entry:
+	kobject_del(&entry->kobj);
+err_put_entry:
+	kobject_put(&entry->kobj);
+	return err;
+}
+
+/* iterate over all fw_cfg directory entries, registering each one */
+static int fw_cfg_register_dir_entries(void)
+{
+	int ret = 0;
+	__be32 files_count;
+	u32 count, i;
+	struct fw_cfg_file *dir;
+	size_t dir_size;
+
+	ret = fw_cfg_read_blob(FW_CFG_FILE_DIR, &files_count,
+			0, sizeof(files_count));
+	if (ret < 0)
+		return ret;
+
+	count = be32_to_cpu(files_count);
+	dir_size = count * sizeof(struct fw_cfg_file);
+
+	dir = kmalloc(dir_size, GFP_KERNEL);
+	if (!dir)
+		return -ENOMEM;
+
+	ret = fw_cfg_read_blob(FW_CFG_FILE_DIR, dir,
+			sizeof(files_count), dir_size);
+	if (ret < 0)
+		goto end;
+
+	for (i = 0; i < count; i++) {
+		ret = fw_cfg_register_file(&dir[i]);
+		if (ret)
+			break;
+	}
+
+end:
+	kfree(dir);
+	return ret;
+}
+
+/* unregister top-level or by_key folder */
+static inline void fw_cfg_kobj_cleanup(struct kobject *kobj)
+{
+	kobject_del(kobj);
+	kobject_put(kobj);
+}
+
+static int fw_cfg_sysfs_probe(struct platform_device *pdev)
+{
+	int err;
+	__le32 rev;
+
+	/* NOTE: If we supported multiple fw_cfg devices, we'd first create
+	 * a subdirectory named after e.g. pdev->id, then hang per-device
+	 * by_key (and by_name) subdirectories underneath it. However, only
+	 * one fw_cfg device exist system-wide, so if one was already found
+	 * earlier, we might as well stop here.
+	 */
+	if (fw_cfg_sel_ko)
+		return -EBUSY;
+
+	/* create by_key and by_name subdirs of /sys/firmware/qemu_fw_cfg/ */
+	err = -ENOMEM;
+	fw_cfg_sel_ko = kobject_create_and_add("by_key", fw_cfg_top_ko);
+	if (!fw_cfg_sel_ko)
+		goto err_sel;
+	fw_cfg_fname_kset = kset_create_and_add("by_name", NULL, fw_cfg_top_ko);
+	if (!fw_cfg_fname_kset)
+		goto err_name;
+
+	/* initialize fw_cfg device i/o from platform data */
+	err = fw_cfg_do_platform_probe(pdev);
+	if (err)
+		goto err_probe;
+
+	/* get revision number, add matching top-level attribute */
+	err = fw_cfg_read_blob(FW_CFG_ID, &rev, 0, sizeof(rev));
+	if (err < 0)
+		goto err_probe;
+
+	fw_cfg_rev = le32_to_cpu(rev);
+	err = sysfs_create_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+	if (err)
+		goto err_rev;
+
+	/* process fw_cfg file directory entry, registering each file */
+	err = fw_cfg_register_dir_entries();
+	if (err)
+		goto err_dir;
+
+	/* success */
+	pr_debug("fw_cfg: loaded.\n");
+	return 0;
+
+err_dir:
+	fw_cfg_sysfs_cache_cleanup();
+	sysfs_remove_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+err_rev:
+	fw_cfg_io_cleanup();
+err_probe:
+	fw_cfg_kset_unregister_recursive(fw_cfg_fname_kset);
+err_name:
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+err_sel:
+	return err;
+}
+
+static int fw_cfg_sysfs_remove(struct platform_device *pdev)
+{
+	pr_debug("fw_cfg: unloading.\n");
+	fw_cfg_sysfs_cache_cleanup();
+	sysfs_remove_file(fw_cfg_top_ko, &fw_cfg_rev_attr.attr);
+	fw_cfg_io_cleanup();
+	fw_cfg_kset_unregister_recursive(fw_cfg_fname_kset);
+	fw_cfg_kobj_cleanup(fw_cfg_sel_ko);
+	return 0;
+}
+
+static const struct of_device_id fw_cfg_sysfs_mmio_match[] = {
+	{ .compatible = "qemu,fw-cfg-mmio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, fw_cfg_sysfs_mmio_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id fw_cfg_sysfs_acpi_match[] = {
+	{ FW_CFG_ACPI_DEVICE_ID, },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, fw_cfg_sysfs_acpi_match);
+#endif
+
+static struct platform_driver fw_cfg_sysfs_driver = {
+	.probe = fw_cfg_sysfs_probe,
+	.remove = fw_cfg_sysfs_remove,
+	.driver = {
+		.name = "fw_cfg",
+		.of_match_table = fw_cfg_sysfs_mmio_match,
+		.acpi_match_table = ACPI_PTR(fw_cfg_sysfs_acpi_match),
+	},
+};
+
+#ifdef CONFIG_FW_CFG_SYSFS_CMDLINE
+
+static struct platform_device *fw_cfg_cmdline_dev;
+
+/* this probably belongs in e.g. include/linux/types.h,
+ * but right now we are the only ones doing it...
+ */
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+#define __PHYS_ADDR_PREFIX "ll"
+#else
+#define __PHYS_ADDR_PREFIX ""
+#endif
+
+/* use special scanf/printf modifier for phys_addr_t, resource_size_t */
+#define PH_ADDR_SCAN_FMT "@%" __PHYS_ADDR_PREFIX "i%n" \
+			 ":%" __PHYS_ADDR_PREFIX "i" \
+			 ":%" __PHYS_ADDR_PREFIX "i%n" \
+			 ":%" __PHYS_ADDR_PREFIX "i%n"
+
+#define PH_ADDR_PR_1_FMT "0x%" __PHYS_ADDR_PREFIX "x@" \
+			 "0x%" __PHYS_ADDR_PREFIX "x"
+
+#define PH_ADDR_PR_3_FMT PH_ADDR_PR_1_FMT \
+			 ":%" __PHYS_ADDR_PREFIX "u" \
+			 ":%" __PHYS_ADDR_PREFIX "u"
+
+#define PH_ADDR_PR_4_FMT PH_ADDR_PR_3_FMT \
+			 ":%" __PHYS_ADDR_PREFIX "u"
+
+static int fw_cfg_cmdline_set(const char *arg, const struct kernel_param *kp)
+{
+	struct resource res[4] = {};
+	char *str;
+	phys_addr_t base;
+	resource_size_t size, ctrl_off, data_off, dma_off;
+	int processed, consumed = 0;
+
+	/* only one fw_cfg device can exist system-wide, so if one
+	 * was processed on the command line already, we might as
+	 * well stop here.
+	 */
+	if (fw_cfg_cmdline_dev) {
+		/* avoid leaking previously registered device */
+		platform_device_unregister(fw_cfg_cmdline_dev);
+		return -EINVAL;
+	}
+
+	/* consume "<size>" portion of command line argument */
+	size = memparse(arg, &str);
+
+	/* get "@<base>[:<ctrl_off>:<data_off>[:<dma_off>]]" chunks */
+	processed = sscanf(str, PH_ADDR_SCAN_FMT,
+			   &base, &consumed,
+			   &ctrl_off, &data_off, &consumed,
+			   &dma_off, &consumed);
+
+	/* sscanf() must process precisely 1, 3 or 4 chunks:
+	 * <base> is mandatory, optionally followed by <ctrl_off>
+	 * and <data_off>, and <dma_off>;
+	 * there must be no extra characters after the last chunk,
+	 * so str[consumed] must be '\0'.
+	 */
+	if (str[consumed] ||
+	    (processed != 1 && processed != 3 && processed != 4))
+		return -EINVAL;
+
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = !strcmp(kp->name, "mmio") ? IORESOURCE_MEM :
+						   IORESOURCE_IO;
+
+	/* insert register offsets, if provided */
+	if (processed > 1) {
+		res[1].name = "ctrl";
+		res[1].start = ctrl_off;
+		res[1].flags = IORESOURCE_REG;
+		res[2].name = "data";
+		res[2].start = data_off;
+		res[2].flags = IORESOURCE_REG;
+	}
+	if (processed > 3) {
+		res[3].name = "dma";
+		res[3].start = dma_off;
+		res[3].flags = IORESOURCE_REG;
+	}
+
+	/* "processed" happens to nicely match the number of resources
+	 * we need to pass in to this platform device.
+	 */
+	fw_cfg_cmdline_dev = platform_device_register_simple("fw_cfg",
+					PLATFORM_DEVID_NONE, res, processed);
+
+	return PTR_ERR_OR_ZERO(fw_cfg_cmdline_dev);
+}
+
+static int fw_cfg_cmdline_get(char *buf, const struct kernel_param *kp)
+{
+	/* stay silent if device was not configured via the command
+	 * line, or if the parameter name (ioport/mmio) doesn't match
+	 * the device setting
+	 */
+	if (!fw_cfg_cmdline_dev ||
+	    (!strcmp(kp->name, "mmio") ^
+	     (fw_cfg_cmdline_dev->resource[0].flags == IORESOURCE_MEM)))
+		return 0;
+
+	switch (fw_cfg_cmdline_dev->num_resources) {
+	case 1:
+		return snprintf(buf, PAGE_SIZE, PH_ADDR_PR_1_FMT,
+				resource_size(&fw_cfg_cmdline_dev->resource[0]),
+				fw_cfg_cmdline_dev->resource[0].start);
+	case 3:
+		return snprintf(buf, PAGE_SIZE, PH_ADDR_PR_3_FMT,
+				resource_size(&fw_cfg_cmdline_dev->resource[0]),
+				fw_cfg_cmdline_dev->resource[0].start,
+				fw_cfg_cmdline_dev->resource[1].start,
+				fw_cfg_cmdline_dev->resource[2].start);
+	case 4:
+		return snprintf(buf, PAGE_SIZE, PH_ADDR_PR_4_FMT,
+				resource_size(&fw_cfg_cmdline_dev->resource[0]),
+				fw_cfg_cmdline_dev->resource[0].start,
+				fw_cfg_cmdline_dev->resource[1].start,
+				fw_cfg_cmdline_dev->resource[2].start,
+				fw_cfg_cmdline_dev->resource[3].start);
+	}
+
+	/* Should never get here */
+	WARN(1, "Unexpected number of resources: %d\n",
+		fw_cfg_cmdline_dev->num_resources);
+	return 0;
+}
+
+static const struct kernel_param_ops fw_cfg_cmdline_param_ops = {
+	.set = fw_cfg_cmdline_set,
+	.get = fw_cfg_cmdline_get,
+};
+
+device_param_cb(ioport, &fw_cfg_cmdline_param_ops, NULL, S_IRUSR);
+device_param_cb(mmio, &fw_cfg_cmdline_param_ops, NULL, S_IRUSR);
+
+#endif /* CONFIG_FW_CFG_SYSFS_CMDLINE */
+
+static int __init fw_cfg_sysfs_init(void)
+{
+	int ret;
+
+	/* create /sys/firmware/qemu_fw_cfg/ top level directory */
+	fw_cfg_top_ko = kobject_create_and_add("qemu_fw_cfg", firmware_kobj);
+	if (!fw_cfg_top_ko)
+		return -ENOMEM;
+
+	ret = platform_driver_register(&fw_cfg_sysfs_driver);
+	if (ret)
+		fw_cfg_kobj_cleanup(fw_cfg_top_ko);
+
+	return ret;
+}
+
+static void __exit fw_cfg_sysfs_exit(void)
+{
+	platform_driver_unregister(&fw_cfg_sysfs_driver);
+
+#ifdef CONFIG_FW_CFG_SYSFS_CMDLINE
+	platform_device_unregister(fw_cfg_cmdline_dev);
+#endif
+
+	/* clean up /sys/firmware/qemu_fw_cfg/ */
+	fw_cfg_kobj_cleanup(fw_cfg_top_ko);
+}
+
+module_init(fw_cfg_sysfs_init);
+module_exit(fw_cfg_sysfs_exit);
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
new file mode 100644
index 000000000..45ff03da2
--- /dev/null
+++ b/drivers/firmware/raspberrypi.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Defines interfaces for interacting wtih the Raspberry Pi firmware's
+ * property channel.
+ *
+ * Copyright © 2015 Broadcom
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kref.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+#define MBOX_MSG(chan, data28)		(((data28) & ~0xf) | ((chan) & 0xf))
+#define MBOX_CHAN(msg)			((msg) & 0xf)
+#define MBOX_DATA28(msg)		((msg) & ~0xf)
+#define MBOX_CHAN_PROPERTY		8
+
+static struct platform_device *rpi_hwmon;
+static struct platform_device *rpi_clk;
+
+struct rpi_firmware {
+	struct mbox_client cl;
+	struct mbox_chan *chan; /* The property channel. */
+	struct completion c;
+	u32 enabled;
+
+	struct kref consumers;
+};
+
+static DEFINE_MUTEX(transaction_lock);
+
+static void response_callback(struct mbox_client *cl, void *msg)
+{
+	struct rpi_firmware *fw = container_of(cl, struct rpi_firmware, cl);
+	complete(&fw->c);
+}
+
+/*
+ * Sends a request to the firmware through the BCM2835 mailbox driver,
+ * and synchronously waits for the reply.
+ */
+static int
+rpi_firmware_transaction(struct rpi_firmware *fw, u32 chan, u32 data)
+{
+	u32 message = MBOX_MSG(chan, data);
+	int ret;
+
+	WARN_ON(data & 0xf);
+
+	mutex_lock(&transaction_lock);
+	reinit_completion(&fw->c);
+	ret = mbox_send_message(fw->chan, &message);
+	if (ret >= 0) {
+		if (wait_for_completion_timeout(&fw->c, HZ)) {
+			ret = 0;
+		} else {
+			ret = -ETIMEDOUT;
+			WARN_ONCE(1, "Firmware transaction timeout");
+		}
+	} else {
+		dev_err(fw->cl.dev, "mbox_send_message returned %d\n", ret);
+	}
+	mutex_unlock(&transaction_lock);
+
+	return ret;
+}
+
+/**
+ * rpi_firmware_property_list - Submit firmware property list
+ * @fw:		Pointer to firmware structure from rpi_firmware_get().
+ * @data:	Buffer holding tags.
+ * @tag_size:	Size of tags buffer.
+ *
+ * Submits a set of concatenated tags to the VPU firmware through the
+ * mailbox property interface.
+ *
+ * The buffer header and the ending tag are added by this function and
+ * don't need to be supplied, just the actual tags for your operation.
+ * See struct rpi_firmware_property_tag_header for the per-tag
+ * structure.
+ */
+int rpi_firmware_property_list(struct rpi_firmware *fw,
+			       void *data, size_t tag_size)
+{
+	size_t size = tag_size + 12;
+	u32 *buf;
+	dma_addr_t bus_addr;
+	int ret;
+
+	/* Packets are processed a dword at a time. */
+	if (size & 3)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(fw->cl.dev, PAGE_ALIGN(size), &bus_addr,
+				 GFP_ATOMIC);
+	if (!buf)
+		return -ENOMEM;
+
+	/* The firmware will error out without parsing in this case. */
+	WARN_ON(size >= 1024 * 1024);
+
+	buf[0] = size;
+	buf[1] = RPI_FIRMWARE_STATUS_REQUEST;
+	memcpy(&buf[2], data, tag_size);
+	buf[size / 4 - 1] = RPI_FIRMWARE_PROPERTY_END;
+	wmb();
+
+	ret = rpi_firmware_transaction(fw, MBOX_CHAN_PROPERTY, bus_addr);
+
+	rmb();
+	memcpy(data, &buf[2], tag_size);
+	if (ret == 0 && buf[1] != RPI_FIRMWARE_STATUS_SUCCESS) {
+		/*
+		 * The tag name here might not be the one causing the
+		 * error, if there were multiple tags in the request.
+		 * But single-tag is the most common, so go with it.
+		 */
+		dev_err(fw->cl.dev, "Request 0x%08x returned status 0x%08x\n",
+			buf[2], buf[1]);
+		ret = -EINVAL;
+	}
+
+	dma_free_coherent(fw->cl.dev, PAGE_ALIGN(size), buf, bus_addr);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property_list);
+
+/**
+ * rpi_firmware_property - Submit single firmware property
+ * @fw:		Pointer to firmware structure from rpi_firmware_get().
+ * @tag:	One of enum_mbox_property_tag.
+ * @tag_data:	Tag data buffer.
+ * @buf_size:	Buffer size.
+ *
+ * Submits a single tag to the VPU firmware through the mailbox
+ * property interface.
+ *
+ * This is a convenience wrapper around
+ * rpi_firmware_property_list() to avoid some of the
+ * boilerplate in property calls.
+ */
+int rpi_firmware_property(struct rpi_firmware *fw,
+			  u32 tag, void *tag_data, size_t buf_size)
+{
+	struct rpi_firmware_property_tag_header *header;
+	int ret;
+
+	/* Some mailboxes can use over 1k bytes. Rather than checking
+	 * size and using stack or kmalloc depending on requirements,
+	 * just use kmalloc. Mailboxes don't get called enough to worry
+	 * too much about the time taken in the allocation.
+	 */
+	void *data = kmalloc(sizeof(*header) + buf_size, GFP_KERNEL);
+
+	if (!data)
+		return -ENOMEM;
+
+	header = data;
+	header->tag = tag;
+	header->buf_size = buf_size;
+	header->req_resp_size = 0;
+	memcpy(data + sizeof(*header), tag_data, buf_size);
+
+	ret = rpi_firmware_property_list(fw, data, buf_size + sizeof(*header));
+
+	memcpy(tag_data, data + sizeof(*header), buf_size);
+
+	kfree(data);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_property);
+
+static void
+rpi_firmware_print_firmware_revision(struct rpi_firmware *fw)
+{
+	time64_t date_and_time;
+	u32 packet;
+	int ret = rpi_firmware_property(fw,
+					RPI_FIRMWARE_GET_FIRMWARE_REVISION,
+					&packet, sizeof(packet));
+
+	if (ret)
+		return;
+
+	/* This is not compatible with y2038 */
+	date_and_time = packet;
+	dev_info(fw->cl.dev, "Attached to firmware from %ptT\n", &date_and_time);
+}
+
+static void
+rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw)
+{
+	u32 packet;
+	int ret = rpi_firmware_property(fw, RPI_FIRMWARE_GET_THROTTLED,
+					&packet, sizeof(packet));
+
+	if (ret)
+		return;
+
+	rpi_hwmon = platform_device_register_data(dev, "raspberrypi-hwmon",
+						  -1, NULL, 0);
+}
+
+static void rpi_register_clk_driver(struct device *dev)
+{
+	struct device_node *firmware;
+
+	/*
+	 * Earlier DTs don't have a node for the firmware clocks but
+	 * rely on us creating a platform device by hand. If we do
+	 * have a node for the firmware clocks, just bail out here.
+	 */
+	firmware = of_get_compatible_child(dev->of_node,
+					   "raspberrypi,firmware-clocks");
+	if (firmware) {
+		of_node_put(firmware);
+		return;
+	}
+
+	rpi_clk = platform_device_register_data(dev, "raspberrypi-clk",
+						-1, NULL, 0);
+}
+
+static void rpi_firmware_delete(struct kref *kref)
+{
+	struct rpi_firmware *fw = container_of(kref, struct rpi_firmware,
+					       consumers);
+
+	mbox_free_channel(fw->chan);
+	kfree(fw);
+}
+
+void rpi_firmware_put(struct rpi_firmware *fw)
+{
+	kref_put(&fw->consumers, rpi_firmware_delete);
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_put);
+
+static void devm_rpi_firmware_put(void *data)
+{
+	struct rpi_firmware *fw = data;
+
+	rpi_firmware_put(fw);
+}
+
+static int rpi_firmware_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *fw;
+
+	/*
+	 * Memory will be freed by rpi_firmware_delete() once all users have
+	 * released their firmware handles. Don't use devm_kzalloc() here.
+	 */
+	fw = kzalloc(sizeof(*fw), GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	fw->cl.dev = dev;
+	fw->cl.rx_callback = response_callback;
+	fw->cl.tx_block = true;
+
+	fw->chan = mbox_request_channel(&fw->cl, 0);
+	if (IS_ERR(fw->chan)) {
+		int ret = PTR_ERR(fw->chan);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get mbox channel: %d\n", ret);
+		kfree(fw);
+		return ret;
+	}
+
+	init_completion(&fw->c);
+	kref_init(&fw->consumers);
+
+	platform_set_drvdata(pdev, fw);
+
+	rpi_firmware_print_firmware_revision(fw);
+	rpi_register_hwmon_driver(dev, fw);
+	rpi_register_clk_driver(dev);
+
+	return 0;
+}
+
+static void rpi_firmware_shutdown(struct platform_device *pdev)
+{
+	struct rpi_firmware *fw = platform_get_drvdata(pdev);
+
+	if (!fw)
+		return;
+
+	rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_REBOOT, NULL, 0);
+}
+
+static int rpi_firmware_remove(struct platform_device *pdev)
+{
+	struct rpi_firmware *fw = platform_get_drvdata(pdev);
+
+	platform_device_unregister(rpi_hwmon);
+	rpi_hwmon = NULL;
+	platform_device_unregister(rpi_clk);
+	rpi_clk = NULL;
+
+	rpi_firmware_put(fw);
+
+	return 0;
+}
+
+/**
+ * rpi_firmware_get - Get pointer to rpi_firmware structure.
+ * @firmware_node:    Pointer to the firmware Device Tree node.
+ *
+ * The reference to rpi_firmware has to be released with rpi_firmware_put().
+ *
+ * Returns NULL is the firmware device is not ready.
+ */
+struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node)
+{
+	struct platform_device *pdev = of_find_device_by_node(firmware_node);
+	struct rpi_firmware *fw;
+
+	if (!pdev)
+		return NULL;
+
+	fw = platform_get_drvdata(pdev);
+	if (!fw)
+		goto err_put_device;
+
+	if (!kref_get_unless_zero(&fw->consumers))
+		goto err_put_device;
+
+	put_device(&pdev->dev);
+
+	return fw;
+
+err_put_device:
+	put_device(&pdev->dev);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rpi_firmware_get);
+
+/**
+ * devm_rpi_firmware_get - Get pointer to rpi_firmware structure.
+ * @firmware_node:    Pointer to the firmware Device Tree node.
+ *
+ * Returns NULL is the firmware device is not ready.
+ */
+struct rpi_firmware *devm_rpi_firmware_get(struct device *dev,
+					   struct device_node *firmware_node)
+{
+	struct rpi_firmware *fw;
+
+	fw = rpi_firmware_get(firmware_node);
+	if (!fw)
+		return NULL;
+
+	if (devm_add_action_or_reset(dev, devm_rpi_firmware_put, fw))
+		return NULL;
+
+	return fw;
+}
+EXPORT_SYMBOL_GPL(devm_rpi_firmware_get);
+
+static const struct of_device_id rpi_firmware_of_match[] = {
+	{ .compatible = "raspberrypi,bcm2835-firmware", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rpi_firmware_of_match);
+
+static struct platform_driver rpi_firmware_driver = {
+	.driver = {
+		.name = "raspberrypi-firmware",
+		.of_match_table = rpi_firmware_of_match,
+	},
+	.probe		= rpi_firmware_probe,
+	.shutdown	= rpi_firmware_shutdown,
+	.remove		= rpi_firmware_remove,
+};
+module_platform_driver(rpi_firmware_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi firmware driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/firmware/scpi_pm_domain.c
new file mode 100644
index 000000000..800673910
--- /dev/null
+++ b/drivers/firmware/scpi_pm_domain.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SCPI Generic power domain support.
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/pm_domain.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_pm_domain {
+	struct generic_pm_domain genpd;
+	struct scpi_ops *ops;
+	u32 domain;
+};
+
+/*
+ * These device power state values are not well-defined in the specification.
+ * In case, different implementations use different values, we can make these
+ * specific to compatibles rather than getting these values from device tree.
+ */
+enum scpi_power_domain_state {
+	SCPI_PD_STATE_ON = 0,
+	SCPI_PD_STATE_OFF = 3,
+};
+
+#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd)
+
+static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on)
+{
+	int ret;
+	enum scpi_power_domain_state state;
+
+	if (power_on)
+		state = SCPI_PD_STATE_ON;
+	else
+		state = SCPI_PD_STATE_OFF;
+
+	ret = pd->ops->device_set_power_state(pd->domain, state);
+	if (ret)
+		return ret;
+
+	return !(state == pd->ops->device_get_power_state(pd->domain));
+}
+
+static int scpi_pd_power_on(struct generic_pm_domain *domain)
+{
+	struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+	return scpi_pd_power(pd, true);
+}
+
+static int scpi_pd_power_off(struct generic_pm_domain *domain)
+{
+	struct scpi_pm_domain *pd = to_scpi_pd(domain);
+
+	return scpi_pd_power(pd, false);
+}
+
+static int scpi_pm_domain_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct scpi_pm_domain *scpi_pd;
+	struct genpd_onecell_data *scpi_pd_data;
+	struct generic_pm_domain **domains;
+	struct scpi_ops *scpi_ops;
+	int ret, num_domains, i;
+
+	scpi_ops = get_scpi_ops();
+	if (!scpi_ops)
+		return -EPROBE_DEFER;
+
+	if (!np) {
+		dev_err(dev, "device tree node not found\n");
+		return -ENODEV;
+	}
+
+	if (!scpi_ops->device_set_power_state ||
+	    !scpi_ops->device_get_power_state) {
+		dev_err(dev, "power domains not supported in the firmware\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(np, "num-domains", &num_domains);
+	if (ret) {
+		dev_err(dev, "number of domains not found\n");
+		return -EINVAL;
+	}
+
+	scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL);
+	if (!scpi_pd)
+		return -ENOMEM;
+
+	scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL);
+	if (!scpi_pd_data)
+		return -ENOMEM;
+
+	domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	for (i = 0; i < num_domains; i++, scpi_pd++) {
+		domains[i] = &scpi_pd->genpd;
+
+		scpi_pd->domain = i;
+		scpi_pd->ops = scpi_ops;
+		scpi_pd->genpd.name = devm_kasprintf(dev, GFP_KERNEL,
+						     "%pOFn.%d", np, i);
+		if (!scpi_pd->genpd.name) {
+			dev_err(dev, "Failed to allocate genpd name:%pOFn.%d\n",
+				np, i);
+			continue;
+		}
+		scpi_pd->genpd.power_off = scpi_pd_power_off;
+		scpi_pd->genpd.power_on = scpi_pd_power_on;
+
+		/*
+		 * Treat all power domains as off at boot.
+		 *
+		 * The SCP firmware itself may have switched on some domains,
+		 * but for reference counting purpose, keep it this way.
+		 */
+		pm_genpd_init(&scpi_pd->genpd, NULL, true);
+	}
+
+	scpi_pd_data->domains = domains;
+	scpi_pd_data->num_domains = num_domains;
+
+	of_genpd_add_provider_onecell(np, scpi_pd_data);
+
+	return 0;
+}
+
+static const struct of_device_id scpi_power_domain_ids[] = {
+	{ .compatible = "arm,scpi-power-domains", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, scpi_power_domain_ids);
+
+static struct platform_driver scpi_power_domain_driver = {
+	.driver	= {
+		.name = "scpi_power_domain",
+		.of_match_table = scpi_power_domain_ids,
+	},
+	.probe = scpi_pm_domain_probe,
+};
+module_platform_driver(scpi_power_domain_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI power domain driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/smccc/Kconfig b/drivers/firmware/smccc/Kconfig
new file mode 100644
index 000000000..15e746617
--- /dev/null
+++ b/drivers/firmware/smccc/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config HAVE_ARM_SMCCC
+	bool
+	help
+	  Include support for the Secure Monitor Call (SMC) and Hypervisor
+	  Call (HVC) instructions on Armv7 and above architectures.
+
+config HAVE_ARM_SMCCC_DISCOVERY
+	bool
+	depends on ARM_PSCI_FW
+	default y
+	help
+	 SMCCC v1.0 lacked discoverability and hence PSCI v1.0 was updated
+	 to add SMCCC discovery mechanism though the PSCI firmware
+	 implementation of PSCI_FEATURES(SMCCC_VERSION) which returns
+	 success on firmware compliant to SMCCC v1.1 and above.
+
+config ARM_SMCCC_SOC_ID
+	bool "SoC bus device for the ARM SMCCC SOC_ID"
+	depends on HAVE_ARM_SMCCC_DISCOVERY
+	default y
+	select SOC_BUS
+	help
+	  Include support for the SoC bus on the ARM SMCCC firmware based
+	  platforms providing some sysfs information about the SoC variant.
diff --git a/drivers/firmware/smccc/Makefile b/drivers/firmware/smccc/Makefile
new file mode 100644
index 000000000..72ab84042
--- /dev/null
+++ b/drivers/firmware/smccc/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY)	+= smccc.o
+obj-$(CONFIG_ARM_SMCCC_SOC_ID)	+= soc_id.o
diff --git a/drivers/firmware/smccc/smccc.c b/drivers/firmware/smccc/smccc.c
new file mode 100644
index 000000000..00c88b809
--- /dev/null
+++ b/drivers/firmware/smccc/smccc.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Arm Limited
+ */
+
+#define pr_fmt(fmt) "smccc: " fmt
+
+#include <linux/init.h>
+#include <linux/arm-smccc.h>
+
+static u32 smccc_version = ARM_SMCCC_VERSION_1_0;
+static enum arm_smccc_conduit smccc_conduit = SMCCC_CONDUIT_NONE;
+
+void __init arm_smccc_version_init(u32 version, enum arm_smccc_conduit conduit)
+{
+	smccc_version = version;
+	smccc_conduit = conduit;
+}
+
+enum arm_smccc_conduit arm_smccc_1_1_get_conduit(void)
+{
+	if (smccc_version < ARM_SMCCC_VERSION_1_1)
+		return SMCCC_CONDUIT_NONE;
+
+	return smccc_conduit;
+}
+EXPORT_SYMBOL_GPL(arm_smccc_1_1_get_conduit);
+
+u32 arm_smccc_get_version(void)
+{
+	return smccc_version;
+}
+EXPORT_SYMBOL_GPL(arm_smccc_get_version);
diff --git a/drivers/firmware/smccc/soc_id.c b/drivers/firmware/smccc/soc_id.c
new file mode 100644
index 000000000..dd7c3d5e8
--- /dev/null
+++ b/drivers/firmware/smccc/soc_id.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Arm Limited
+ */
+
+#define pr_fmt(fmt) "SMCCC: SOC_ID: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+#define SMCCC_SOC_ID_JEP106_BANK_IDX_MASK	GENMASK(30, 24)
+/*
+ * As per the SMC Calling Convention specification v1.2 (ARM DEN 0028C)
+ * Section 7.4 SMCCC_ARCH_SOC_ID bits[23:16] are JEP-106 identification
+ * code with parity bit for the SiP. We can drop the parity bit.
+ */
+#define SMCCC_SOC_ID_JEP106_ID_CODE_MASK	GENMASK(22, 16)
+#define SMCCC_SOC_ID_IMP_DEF_SOC_ID_MASK	GENMASK(15, 0)
+
+#define JEP106_BANK_CONT_CODE(x)	\
+	(u8)(FIELD_GET(SMCCC_SOC_ID_JEP106_BANK_IDX_MASK, (x)))
+#define JEP106_ID_CODE(x)	\
+	(u8)(FIELD_GET(SMCCC_SOC_ID_JEP106_ID_CODE_MASK, (x)))
+#define IMP_DEF_SOC_ID(x)	\
+	(u16)(FIELD_GET(SMCCC_SOC_ID_IMP_DEF_SOC_ID_MASK, (x)))
+
+static struct soc_device *soc_dev;
+static struct soc_device_attribute *soc_dev_attr;
+
+static int __init smccc_soc_init(void)
+{
+	struct arm_smccc_res res;
+	int soc_id_rev, soc_id_version;
+	static char soc_id_str[20], soc_id_rev_str[12];
+	static char soc_id_jep106_id_str[12];
+
+	if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_2)
+		return 0;
+
+	if (arm_smccc_1_1_get_conduit() == SMCCC_CONDUIT_NONE) {
+		pr_err("%s: invalid SMCCC conduit\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_SOC_ID, &res);
+
+	if ((int)res.a0 == SMCCC_RET_NOT_SUPPORTED) {
+		pr_info("ARCH_SOC_ID not implemented, skipping ....\n");
+		return 0;
+	}
+
+	if ((int)res.a0 < 0) {
+		pr_info("ARCH_FEATURES(ARCH_SOC_ID) returned error: %lx\n",
+			res.a0);
+		return -EINVAL;
+	}
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_SOC_ID, 0, &res);
+	if ((int)res.a0 < 0) {
+		pr_err("ARCH_SOC_ID(0) returned error: %lx\n", res.a0);
+		return -EINVAL;
+	}
+
+	soc_id_version = res.a0;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_SOC_ID, 1, &res);
+	if ((int)res.a0 < 0) {
+		pr_err("ARCH_SOC_ID(1) returned error: %lx\n", res.a0);
+		return -EINVAL;
+	}
+
+	soc_id_rev = res.a0;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	sprintf(soc_id_rev_str, "0x%08x", soc_id_rev);
+	sprintf(soc_id_jep106_id_str, "jep106:%02x%02x",
+		JEP106_BANK_CONT_CODE(soc_id_version),
+		JEP106_ID_CODE(soc_id_version));
+	sprintf(soc_id_str, "%s:%04x", soc_id_jep106_id_str,
+		IMP_DEF_SOC_ID(soc_id_version));
+
+	soc_dev_attr->soc_id = soc_id_str;
+	soc_dev_attr->revision = soc_id_rev_str;
+	soc_dev_attr->family = soc_id_jep106_id_str;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	pr_info("ID = %s Revision = %s\n", soc_dev_attr->soc_id,
+		soc_dev_attr->revision);
+
+	return 0;
+}
+module_init(smccc_soc_init);
+
+static void __exit smccc_soc_exit(void)
+{
+	if (soc_dev)
+		soc_device_unregister(soc_dev);
+	kfree(soc_dev_attr);
+}
+module_exit(smccc_soc_exit);
diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-rsu.c
new file mode 100644
index 000000000..9378075d0
--- /dev/null
+++ b/drivers/firmware/stratix10-rsu.c
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019, Intel Corporation
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/kobject.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#define RSU_STATE_MASK			GENMASK_ULL(31, 0)
+#define RSU_VERSION_MASK		GENMASK_ULL(63, 32)
+#define RSU_ERROR_LOCATION_MASK		GENMASK_ULL(31, 0)
+#define RSU_ERROR_DETAIL_MASK		GENMASK_ULL(63, 32)
+#define RSU_DCMF0_MASK			GENMASK_ULL(31, 0)
+#define RSU_DCMF1_MASK			GENMASK_ULL(63, 32)
+#define RSU_DCMF2_MASK			GENMASK_ULL(31, 0)
+#define RSU_DCMF3_MASK			GENMASK_ULL(63, 32)
+
+#define RSU_TIMEOUT	(msecs_to_jiffies(SVC_RSU_REQUEST_TIMEOUT_MS))
+
+#define INVALID_RETRY_COUNTER		0xFF
+#define INVALID_DCMF_VERSION		0xFF
+
+
+typedef void (*rsu_callback)(struct stratix10_svc_client *client,
+			     struct stratix10_svc_cb_data *data);
+/**
+ * struct stratix10_rsu_priv - rsu data structure
+ * @chan: pointer to the allocated service channel
+ * @client: active service client
+ * @completion: state for callback completion
+ * @lock: a mutex to protect callback completion state
+ * @status.current_image: address of image currently running in flash
+ * @status.fail_image: address of failed image in flash
+ * @status.version: the interface version number of RSU firmware
+ * @status.state: the state of RSU system
+ * @status.error_details: error code
+ * @status.error_location: the error offset inside the image that failed
+ * @dcmf_version.dcmf0: Quartus dcmf0 version
+ * @dcmf_version.dcmf1: Quartus dcmf1 version
+ * @dcmf_version.dcmf2: Quartus dcmf2 version
+ * @dcmf_version.dcmf3: Quartus dcmf3 version
+ * @retry_counter: the current image's retry counter
+ * @max_retry: the preset max retry value
+ */
+struct stratix10_rsu_priv {
+	struct stratix10_svc_chan *chan;
+	struct stratix10_svc_client client;
+	struct completion completion;
+	struct mutex lock;
+	struct {
+		unsigned long current_image;
+		unsigned long fail_image;
+		unsigned int version;
+		unsigned int state;
+		unsigned int error_details;
+		unsigned int error_location;
+	} status;
+
+	struct {
+		unsigned int dcmf0;
+		unsigned int dcmf1;
+		unsigned int dcmf2;
+		unsigned int dcmf3;
+	} dcmf_version;
+
+	unsigned int retry_counter;
+	unsigned int max_retry;
+};
+
+/**
+ * rsu_status_callback() - Status callback from Intel Service Layer
+ * @client: pointer to service client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU status request. Status is
+ * only updated after a system reboot, so a get updated status call is
+ * made during driver probe.
+ */
+static void rsu_status_callback(struct stratix10_svc_client *client,
+				struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+	struct arm_smccc_res *res = (struct arm_smccc_res *)data->kaddr1;
+
+	if (data->status == BIT(SVC_STATUS_OK)) {
+		priv->status.version = FIELD_GET(RSU_VERSION_MASK,
+						 res->a2);
+		priv->status.state = FIELD_GET(RSU_STATE_MASK, res->a2);
+		priv->status.fail_image = res->a1;
+		priv->status.current_image = res->a0;
+		priv->status.error_location =
+			FIELD_GET(RSU_ERROR_LOCATION_MASK, res->a3);
+		priv->status.error_details =
+			FIELD_GET(RSU_ERROR_DETAIL_MASK, res->a3);
+	} else {
+		dev_err(client->dev, "COMMAND_RSU_STATUS returned 0x%lX\n",
+			res->a0);
+		priv->status.version = 0;
+		priv->status.state = 0;
+		priv->status.fail_image = 0;
+		priv->status.current_image = 0;
+		priv->status.error_location = 0;
+		priv->status.error_details = 0;
+	}
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_command_callback() - Update callback from Intel Service Layer
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for RSU commands.
+ */
+static void rsu_command_callback(struct stratix10_svc_client *client,
+				 struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+
+	if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
+		dev_warn(client->dev, "FW doesn't support notify\n");
+	else if (data->status == BIT(SVC_STATUS_ERROR))
+		dev_err(client->dev, "Failure, returned status is %lu\n",
+			BIT(data->status));
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_retry_callback() - Callback from Intel service layer for getting
+ * the current image's retry counter from the firmware
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for retry counter, which is used by
+ * user to know how many times the images is still allowed to reload
+ * itself before giving up and starting RSU fail-over flow.
+ */
+static void rsu_retry_callback(struct stratix10_svc_client *client,
+			       struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+	unsigned int *counter = (unsigned int *)data->kaddr1;
+
+	if (data->status == BIT(SVC_STATUS_OK))
+		priv->retry_counter = *counter;
+	else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
+		dev_warn(client->dev, "FW doesn't support retry\n");
+	else
+		dev_err(client->dev, "Failed to get retry counter %lu\n",
+			BIT(data->status));
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_max_retry_callback() - Callback from Intel service layer for getting
+ * the max retry value from the firmware
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for max retry.
+ */
+static void rsu_max_retry_callback(struct stratix10_svc_client *client,
+				   struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+	unsigned int *max_retry = (unsigned int *)data->kaddr1;
+
+	if (data->status == BIT(SVC_STATUS_OK))
+		priv->max_retry = *max_retry;
+	else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
+		dev_warn(client->dev, "FW doesn't support max retry\n");
+	else
+		dev_err(client->dev, "Failed to get max retry %lu\n",
+			BIT(data->status));
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_dcmf_version_callback() - Callback from Intel service layer for getting
+ * the DCMF version
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for DCMF version number
+ */
+static void rsu_dcmf_version_callback(struct stratix10_svc_client *client,
+				      struct stratix10_svc_cb_data *data)
+{
+	struct stratix10_rsu_priv *priv = client->priv;
+	unsigned long long *value1 = (unsigned long long *)data->kaddr1;
+	unsigned long long *value2 = (unsigned long long *)data->kaddr2;
+
+	if (data->status == BIT(SVC_STATUS_OK)) {
+		priv->dcmf_version.dcmf0 = FIELD_GET(RSU_DCMF0_MASK, *value1);
+		priv->dcmf_version.dcmf1 = FIELD_GET(RSU_DCMF1_MASK, *value1);
+		priv->dcmf_version.dcmf2 = FIELD_GET(RSU_DCMF2_MASK, *value2);
+		priv->dcmf_version.dcmf3 = FIELD_GET(RSU_DCMF3_MASK, *value2);
+	} else
+		dev_err(client->dev, "failed to get DCMF version\n");
+
+	complete(&priv->completion);
+}
+
+/**
+ * rsu_send_msg() - send a message to Intel service layer
+ * @priv: pointer to rsu private data
+ * @command: RSU status or update command
+ * @arg: the request argument, the bitstream address or notify status
+ * @callback: function pointer for the callback (status or update)
+ *
+ * Start an Intel service layer transaction to perform the SMC call that
+ * is necessary to get RSU boot log or set the address of bitstream to
+ * boot after reboot.
+ *
+ * Returns 0 on success or -ETIMEDOUT on error.
+ */
+static int rsu_send_msg(struct stratix10_rsu_priv *priv,
+			enum stratix10_svc_command_code command,
+			unsigned long arg,
+			rsu_callback callback)
+{
+	struct stratix10_svc_client_msg msg;
+	int ret;
+
+	mutex_lock(&priv->lock);
+	reinit_completion(&priv->completion);
+	priv->client.receive_cb = callback;
+
+	msg.command = command;
+	if (arg)
+		msg.arg[0] = arg;
+
+	ret = stratix10_svc_send(priv->chan, &msg);
+	if (ret < 0)
+		goto status_done;
+
+	ret = wait_for_completion_interruptible_timeout(&priv->completion,
+							RSU_TIMEOUT);
+	if (!ret) {
+		dev_err(priv->client.dev,
+			"timeout waiting for SMC call\n");
+		ret = -ETIMEDOUT;
+		goto status_done;
+	} else if (ret < 0) {
+		dev_err(priv->client.dev,
+			"error %d waiting for SMC call\n", ret);
+		goto status_done;
+	} else {
+		ret = 0;
+	}
+
+status_done:
+	stratix10_svc_done(priv->chan);
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+/*
+ * This driver exposes some optional features of the Intel Stratix 10 SoC FPGA.
+ * The sysfs interfaces exposed here are FPGA Remote System Update (RSU)
+ * related. They allow user space software to query the configuration system
+ * status and to request optional reboot behavior specific to Intel FPGAs.
+ */
+
+static ssize_t current_image_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08lx\n", priv->status.current_image);
+}
+
+static ssize_t fail_image_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08lx\n", priv->status.fail_image);
+}
+
+static ssize_t version_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->status.version);
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->status.state);
+}
+
+static ssize_t error_location_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->status.error_location);
+}
+
+static ssize_t error_details_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->status.error_details);
+}
+
+static ssize_t retry_counter_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->retry_counter);
+}
+
+static ssize_t max_retry_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->max_retry);
+}
+
+static ssize_t dcmf0_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf0);
+}
+
+static ssize_t dcmf1_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf1);
+}
+
+static ssize_t dcmf2_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf2);
+}
+
+static ssize_t dcmf3_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+	if (!priv)
+		return -ENODEV;
+
+	return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf3);
+}
+
+static ssize_t reboot_image_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+	unsigned long address;
+	int ret;
+
+	if (!priv)
+		return -ENODEV;
+
+	ret = kstrtoul(buf, 0, &address);
+	if (ret)
+		return ret;
+
+	ret = rsu_send_msg(priv, COMMAND_RSU_UPDATE,
+			   address, rsu_command_callback);
+	if (ret) {
+		dev_err(dev, "Error, RSU update returned %i\n", ret);
+		return ret;
+	}
+
+	return count;
+}
+
+static ssize_t notify_store(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+	unsigned long status;
+	int ret;
+
+	if (!priv)
+		return -ENODEV;
+
+	ret = kstrtoul(buf, 0, &status);
+	if (ret)
+		return ret;
+
+	ret = rsu_send_msg(priv, COMMAND_RSU_NOTIFY,
+			   status, rsu_command_callback);
+	if (ret) {
+		dev_err(dev, "Error, RSU notify returned %i\n", ret);
+		return ret;
+	}
+
+	/* to get the updated state */
+	ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
+			   0, rsu_status_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting RSU status %i\n", ret);
+		return ret;
+	}
+
+	ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0, rsu_retry_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting RSU retry %i\n", ret);
+		return ret;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_RO(current_image);
+static DEVICE_ATTR_RO(fail_image);
+static DEVICE_ATTR_RO(state);
+static DEVICE_ATTR_RO(version);
+static DEVICE_ATTR_RO(error_location);
+static DEVICE_ATTR_RO(error_details);
+static DEVICE_ATTR_RO(retry_counter);
+static DEVICE_ATTR_RO(max_retry);
+static DEVICE_ATTR_RO(dcmf0);
+static DEVICE_ATTR_RO(dcmf1);
+static DEVICE_ATTR_RO(dcmf2);
+static DEVICE_ATTR_RO(dcmf3);
+static DEVICE_ATTR_WO(reboot_image);
+static DEVICE_ATTR_WO(notify);
+
+static struct attribute *rsu_attrs[] = {
+	&dev_attr_current_image.attr,
+	&dev_attr_fail_image.attr,
+	&dev_attr_state.attr,
+	&dev_attr_version.attr,
+	&dev_attr_error_location.attr,
+	&dev_attr_error_details.attr,
+	&dev_attr_retry_counter.attr,
+	&dev_attr_max_retry.attr,
+	&dev_attr_dcmf0.attr,
+	&dev_attr_dcmf1.attr,
+	&dev_attr_dcmf2.attr,
+	&dev_attr_dcmf3.attr,
+	&dev_attr_reboot_image.attr,
+	&dev_attr_notify.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(rsu);
+
+static int stratix10_rsu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stratix10_rsu_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client.dev = dev;
+	priv->client.receive_cb = NULL;
+	priv->client.priv = priv;
+	priv->status.current_image = 0;
+	priv->status.fail_image = 0;
+	priv->status.error_location = 0;
+	priv->status.error_details = 0;
+	priv->status.version = 0;
+	priv->status.state = 0;
+	priv->retry_counter = INVALID_RETRY_COUNTER;
+	priv->dcmf_version.dcmf0 = INVALID_DCMF_VERSION;
+	priv->dcmf_version.dcmf1 = INVALID_DCMF_VERSION;
+	priv->dcmf_version.dcmf2 = INVALID_DCMF_VERSION;
+	priv->dcmf_version.dcmf3 = INVALID_DCMF_VERSION;
+	priv->max_retry = INVALID_RETRY_COUNTER;
+
+	mutex_init(&priv->lock);
+	priv->chan = stratix10_svc_request_channel_byname(&priv->client,
+							  SVC_CLIENT_RSU);
+	if (IS_ERR(priv->chan)) {
+		dev_err(dev, "couldn't get service channel %s\n",
+			SVC_CLIENT_RSU);
+		return PTR_ERR(priv->chan);
+	}
+
+	init_completion(&priv->completion);
+	platform_set_drvdata(pdev, priv);
+
+	/* get the initial state from firmware */
+	ret = rsu_send_msg(priv, COMMAND_RSU_STATUS,
+			   0, rsu_status_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting RSU status %i\n", ret);
+		stratix10_svc_free_channel(priv->chan);
+	}
+
+	/* get DCMF version from firmware */
+	ret = rsu_send_msg(priv, COMMAND_RSU_DCMF_VERSION,
+			   0, rsu_dcmf_version_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting DCMF version %i\n", ret);
+		stratix10_svc_free_channel(priv->chan);
+	}
+
+	ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0, rsu_retry_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting RSU retry %i\n", ret);
+		stratix10_svc_free_channel(priv->chan);
+	}
+
+	ret = rsu_send_msg(priv, COMMAND_RSU_MAX_RETRY, 0,
+			   rsu_max_retry_callback);
+	if (ret) {
+		dev_err(dev, "Error, getting RSU max retry %i\n", ret);
+		stratix10_svc_free_channel(priv->chan);
+	}
+
+	return ret;
+}
+
+static int stratix10_rsu_remove(struct platform_device *pdev)
+{
+	struct stratix10_rsu_priv *priv = platform_get_drvdata(pdev);
+
+	stratix10_svc_free_channel(priv->chan);
+	return 0;
+}
+
+static struct platform_driver stratix10_rsu_driver = {
+	.probe = stratix10_rsu_probe,
+	.remove = stratix10_rsu_remove,
+	.driver = {
+		.name = "stratix10-rsu",
+		.dev_groups = rsu_groups,
+	},
+};
+
+module_platform_driver(stratix10_rsu_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Remote System Update Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
new file mode 100644
index 000000000..cd0f12b2b
--- /dev/null
+++ b/drivers/firmware/stratix10-svc.c
@@ -0,0 +1,1127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018, Intel Corporation
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/kfifo.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+#include <linux/firmware/intel/stratix10-svc-client.h>
+#include <linux/types.h>
+
+/**
+ * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO
+ *
+ * SVC_NUM_CHANNEL - number of channel supported by service layer driver
+ *
+ * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s)
+ * from the secure world for FPGA manager to reuse, or to free the buffer(s)
+ * when all bit-stream data had be send.
+ *
+ * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status,
+ * service layer will return error to FPGA manager when timeout occurs,
+ * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
+ */
+#define SVC_NUM_DATA_IN_FIFO			32
+#define SVC_NUM_CHANNEL				2
+#define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS	200
+#define FPGA_CONFIG_STATUS_TIMEOUT_SEC		30
+
+/* stratix10 service layer clients */
+#define STRATIX10_RSU				"stratix10-rsu"
+
+typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long,
+			     unsigned long, unsigned long, unsigned long,
+			     unsigned long, unsigned long,
+			     struct arm_smccc_res *);
+struct stratix10_svc_chan;
+
+/**
+ * struct stratix10_svc - svc private data
+ * @stratix10_svc_rsu: pointer to stratix10 RSU device
+ */
+struct stratix10_svc {
+	struct platform_device *stratix10_svc_rsu;
+};
+
+/**
+ * struct stratix10_svc_sh_memory - service shared memory structure
+ * @sync_complete: state for a completion
+ * @addr: physical address of shared memory block
+ * @size: size of shared memory block
+ * @invoke_fn: function to issue secure monitor or hypervisor call
+ *
+ * This struct is used to save physical address and size of shared memory
+ * block. The shared memory blocked is allocated by secure monitor software
+ * at secure world.
+ *
+ * Service layer driver uses the physical address and size to create a memory
+ * pool, then allocates data buffer from that memory pool for service client.
+ */
+struct stratix10_svc_sh_memory {
+	struct completion sync_complete;
+	unsigned long addr;
+	unsigned long size;
+	svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_data_mem - service memory structure
+ * @vaddr: virtual address
+ * @paddr: physical address
+ * @size: size of memory
+ * @node: link list head node
+ *
+ * This struct is used in a list that keeps track of buffers which have
+ * been allocated or freed from the memory pool. Service layer driver also
+ * uses this struct to transfer physical address to virtual address.
+ */
+struct stratix10_svc_data_mem {
+	void *vaddr;
+	phys_addr_t paddr;
+	size_t size;
+	struct list_head node;
+};
+
+/**
+ * struct stratix10_svc_data - service data structure
+ * @chan: service channel
+ * @paddr: playload physical address
+ * @size: playload size
+ * @command: service command requested by client
+ * @flag: configuration type (full or partial)
+ * @arg: args to be passed via registers and not physically mapped buffers
+ *
+ * This struct is used in service FIFO for inter-process communication.
+ */
+struct stratix10_svc_data {
+	struct stratix10_svc_chan *chan;
+	phys_addr_t paddr;
+	size_t size;
+	u32 command;
+	u32 flag;
+	u64 arg[3];
+};
+
+/**
+ * struct stratix10_svc_controller - service controller
+ * @dev: device
+ * @chans: array of service channels
+ * @num_chans: number of channels in 'chans' array
+ * @num_active_client: number of active service client
+ * @node: list management
+ * @genpool: memory pool pointing to the memory region
+ * @task: pointer to the thread task which handles SMC or HVC call
+ * @svc_fifo: a queue for storing service message data
+ * @complete_status: state for completion
+ * @svc_fifo_lock: protect access to service message data queue
+ * @invoke_fn: function to issue secure monitor call or hypervisor call
+ *
+ * This struct is used to create communication channels for service clients, to
+ * handle secure monitor or hypervisor call.
+ */
+struct stratix10_svc_controller {
+	struct device *dev;
+	struct stratix10_svc_chan *chans;
+	int num_chans;
+	int num_active_client;
+	struct list_head node;
+	struct gen_pool *genpool;
+	struct task_struct *task;
+	struct kfifo svc_fifo;
+	struct completion complete_status;
+	spinlock_t svc_fifo_lock;
+	svc_invoke_fn *invoke_fn;
+};
+
+/**
+ * struct stratix10_svc_chan - service communication channel
+ * @ctrl: pointer to service controller which is the provider of this channel
+ * @scl: pointer to service client which owns the channel
+ * @name: service client name associated with the channel
+ * @lock: protect access to the channel
+ *
+ * This struct is used by service client to communicate with service layer, each
+ * service client has its own channel created by service controller.
+ */
+struct stratix10_svc_chan {
+	struct stratix10_svc_controller *ctrl;
+	struct stratix10_svc_client *scl;
+	char *name;
+	spinlock_t lock;
+};
+
+static LIST_HEAD(svc_ctrl);
+static LIST_HEAD(svc_data_mem);
+
+/**
+ * svc_pa_to_va() - translate physical address to virtual address
+ * @addr: to be translated physical address
+ *
+ * Return: valid virtual address or NULL if the provided physical
+ * address doesn't exist.
+ */
+static void *svc_pa_to_va(unsigned long addr)
+{
+	struct stratix10_svc_data_mem *pmem;
+
+	pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr);
+	list_for_each_entry(pmem, &svc_data_mem, node)
+		if (pmem->paddr == addr)
+			return pmem->vaddr;
+
+	/* physical address is not found */
+	return NULL;
+}
+
+/**
+ * svc_thread_cmd_data_claim() - claim back buffer from the secure world
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Claim back the submitted buffers from the secure world and pass buffer
+ * back to service client (FPGA manager, etc) for reuse.
+ */
+static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl,
+				      struct stratix10_svc_data *p_data,
+				      struct stratix10_svc_cb_data *cb_data)
+{
+	struct arm_smccc_res res;
+	unsigned long timeout;
+
+	reinit_completion(&ctrl->complete_status);
+	timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS);
+
+	pr_debug("%s: claim back the submitted buffer\n", __func__);
+	do {
+		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE,
+				0, 0, 0, 0, 0, 0, 0, &res);
+
+		if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+			if (!res.a1) {
+				complete(&ctrl->complete_status);
+				break;
+			}
+			cb_data->status = BIT(SVC_STATUS_BUFFER_DONE);
+			cb_data->kaddr1 = svc_pa_to_va(res.a1);
+			cb_data->kaddr2 = (res.a2) ?
+					  svc_pa_to_va(res.a2) : NULL;
+			cb_data->kaddr3 = (res.a3) ?
+					  svc_pa_to_va(res.a3) : NULL;
+			p_data->chan->scl->receive_cb(p_data->chan->scl,
+						      cb_data);
+		} else {
+			pr_debug("%s: secure world busy, polling again\n",
+				 __func__);
+		}
+	} while (res.a0 == INTEL_SIP_SMC_STATUS_OK ||
+		 res.a0 == INTEL_SIP_SMC_STATUS_BUSY ||
+		 wait_for_completion_timeout(&ctrl->complete_status, timeout));
+}
+
+/**
+ * svc_thread_cmd_config_status() - check configuration status
+ * @ctrl: pointer to service layer controller
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ *
+ * Check whether the secure firmware at secure world has finished the FPGA
+ * configuration, and then inform FPGA manager the configuration status.
+ */
+static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl,
+					 struct stratix10_svc_data *p_data,
+					 struct stratix10_svc_cb_data *cb_data)
+{
+	struct arm_smccc_res res;
+	int count_in_sec;
+
+	cb_data->kaddr1 = NULL;
+	cb_data->kaddr2 = NULL;
+	cb_data->kaddr3 = NULL;
+	cb_data->status = BIT(SVC_STATUS_ERROR);
+
+	pr_debug("%s: polling config status\n", __func__);
+
+	count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC;
+	while (count_in_sec) {
+		ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_ISDONE,
+				0, 0, 0, 0, 0, 0, 0, &res);
+		if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) ||
+		    (res.a0 == INTEL_SIP_SMC_STATUS_ERROR))
+			break;
+
+		/*
+		 * configuration is still in progress, wait one second then
+		 * poll again
+		 */
+		msleep(1000);
+		count_in_sec--;
+	}
+
+	if (res.a0 == INTEL_SIP_SMC_STATUS_OK && count_in_sec)
+		cb_data->status = BIT(SVC_STATUS_COMPLETED);
+
+	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_thread_recv_status_ok() - handle the successful status
+ * @p_data: pointer to service data structure
+ * @cb_data: pointer to callback data structure to service client
+ * @res: result from SMC or HVC call
+ *
+ * Send back the correspond status to the service clients.
+ */
+static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
+				      struct stratix10_svc_cb_data *cb_data,
+				      struct arm_smccc_res res)
+{
+	cb_data->kaddr1 = NULL;
+	cb_data->kaddr2 = NULL;
+	cb_data->kaddr3 = NULL;
+
+	switch (p_data->command) {
+	case COMMAND_RECONFIG:
+	case COMMAND_RSU_UPDATE:
+	case COMMAND_RSU_NOTIFY:
+		cb_data->status = BIT(SVC_STATUS_OK);
+		break;
+	case COMMAND_RECONFIG_DATA_SUBMIT:
+		cb_data->status = BIT(SVC_STATUS_BUFFER_SUBMITTED);
+		break;
+	case COMMAND_RECONFIG_STATUS:
+		cb_data->status = BIT(SVC_STATUS_COMPLETED);
+		break;
+	case COMMAND_RSU_RETRY:
+	case COMMAND_RSU_MAX_RETRY:
+		cb_data->status = BIT(SVC_STATUS_OK);
+		cb_data->kaddr1 = &res.a1;
+		break;
+	case COMMAND_RSU_DCMF_VERSION:
+		cb_data->status = BIT(SVC_STATUS_OK);
+		cb_data->kaddr1 = &res.a1;
+		cb_data->kaddr2 = &res.a2;
+		break;
+	default:
+		pr_warn("it shouldn't happen\n");
+		break;
+	}
+
+	pr_debug("%s: call receive_cb\n", __func__);
+	p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data);
+}
+
+/**
+ * svc_normal_to_secure_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU
+ * node 0, its function stratix10_svc_secure_call_thread is used to handle
+ * SMC or HVC calls between kernel driver and secure monitor software.
+ *
+ * Return: 0 for success or -ENOMEM on error.
+ */
+static int svc_normal_to_secure_thread(void *data)
+{
+	struct stratix10_svc_controller
+			*ctrl = (struct stratix10_svc_controller *)data;
+	struct stratix10_svc_data *pdata;
+	struct stratix10_svc_cb_data *cbdata;
+	struct arm_smccc_res res;
+	unsigned long a0, a1, a2;
+	int ret_fifo = 0;
+
+	pdata =  kmalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL);
+	if (!cbdata) {
+		kfree(pdata);
+		return -ENOMEM;
+	}
+
+	/* default set, to remove build warning */
+	a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK;
+	a1 = 0;
+	a2 = 0;
+
+	pr_debug("smc_hvc_shm_thread is running\n");
+
+	while (!kthread_should_stop()) {
+		ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo,
+						pdata, sizeof(*pdata),
+						&ctrl->svc_fifo_lock);
+
+		if (!ret_fifo)
+			continue;
+
+		pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n",
+			 (unsigned int)pdata->paddr, pdata->command,
+			 (unsigned int)pdata->size);
+
+		switch (pdata->command) {
+		case COMMAND_RECONFIG_DATA_CLAIM:
+			svc_thread_cmd_data_claim(ctrl, pdata, cbdata);
+			continue;
+		case COMMAND_RECONFIG:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_START;
+			pr_debug("conf_type=%u\n", (unsigned int)pdata->flag);
+			a1 = pdata->flag;
+			a2 = 0;
+			break;
+		case COMMAND_RECONFIG_DATA_SUBMIT:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE;
+			a1 = (unsigned long)pdata->paddr;
+			a2 = (unsigned long)pdata->size;
+			break;
+		case COMMAND_RECONFIG_STATUS:
+			a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE;
+			a1 = 0;
+			a2 = 0;
+			break;
+		case COMMAND_RSU_STATUS:
+			a0 = INTEL_SIP_SMC_RSU_STATUS;
+			a1 = 0;
+			a2 = 0;
+			break;
+		case COMMAND_RSU_UPDATE:
+			a0 = INTEL_SIP_SMC_RSU_UPDATE;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
+		case COMMAND_RSU_NOTIFY:
+			a0 = INTEL_SIP_SMC_RSU_NOTIFY;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
+		case COMMAND_RSU_RETRY:
+			a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER;
+			a1 = 0;
+			a2 = 0;
+			break;
+		case COMMAND_RSU_MAX_RETRY:
+			a0 = INTEL_SIP_SMC_RSU_MAX_RETRY;
+			a1 = 0;
+			a2 = 0;
+			break;
+		case COMMAND_RSU_DCMF_VERSION:
+			a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION;
+			a1 = 0;
+			a2 = 0;
+			break;
+		default:
+			pr_warn("it shouldn't happen\n");
+			break;
+		}
+		pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x",
+			 __func__, (unsigned int)a0, (unsigned int)a1);
+		pr_debug(" a2=0x%016x\n", (unsigned int)a2);
+
+		ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res);
+
+		pr_debug("%s: after SMC call -- res.a0=0x%016x",
+			 __func__, (unsigned int)res.a0);
+		pr_debug(" res.a1=0x%016x, res.a2=0x%016x",
+			 (unsigned int)res.a1, (unsigned int)res.a2);
+		pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3);
+
+		if (pdata->command == COMMAND_RSU_STATUS) {
+			if (res.a0 == INTEL_SIP_SMC_RSU_ERROR)
+				cbdata->status = BIT(SVC_STATUS_ERROR);
+			else
+				cbdata->status = BIT(SVC_STATUS_OK);
+
+			cbdata->kaddr1 = &res;
+			cbdata->kaddr2 = NULL;
+			cbdata->kaddr3 = NULL;
+			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+			continue;
+		}
+
+		switch (res.a0) {
+		case INTEL_SIP_SMC_STATUS_OK:
+			svc_thread_recv_status_ok(pdata, cbdata, res);
+			break;
+		case INTEL_SIP_SMC_STATUS_BUSY:
+			switch (pdata->command) {
+			case COMMAND_RECONFIG_DATA_SUBMIT:
+				svc_thread_cmd_data_claim(ctrl,
+							  pdata, cbdata);
+				break;
+			case COMMAND_RECONFIG_STATUS:
+				svc_thread_cmd_config_status(ctrl,
+							     pdata, cbdata);
+				break;
+			default:
+				pr_warn("it shouldn't happen\n");
+				break;
+			}
+			break;
+		case INTEL_SIP_SMC_STATUS_REJECTED:
+			pr_debug("%s: STATUS_REJECTED\n", __func__);
+			break;
+		case INTEL_SIP_SMC_STATUS_ERROR:
+		case INTEL_SIP_SMC_RSU_ERROR:
+			pr_err("%s: STATUS_ERROR\n", __func__);
+			cbdata->status = BIT(SVC_STATUS_ERROR);
+			cbdata->kaddr1 = &res.a1;
+			cbdata->kaddr2 = NULL;
+			cbdata->kaddr3 = NULL;
+			pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata);
+			break;
+		default:
+			pr_warn("Secure firmware doesn't support...\n");
+
+			/*
+			 * be compatible with older version firmware which
+			 * doesn't support RSU notify or retry
+			 */
+			if ((pdata->command == COMMAND_RSU_RETRY) ||
+			    (pdata->command == COMMAND_RSU_MAX_RETRY) ||
+				(pdata->command == COMMAND_RSU_NOTIFY)) {
+				cbdata->status =
+					BIT(SVC_STATUS_NO_SUPPORT);
+				cbdata->kaddr1 = NULL;
+				cbdata->kaddr2 = NULL;
+				cbdata->kaddr3 = NULL;
+				pdata->chan->scl->receive_cb(
+					pdata->chan->scl, cbdata);
+			}
+			break;
+
+		}
+	}
+
+	kfree(cbdata);
+	kfree(pdata);
+
+	return 0;
+}
+
+/**
+ * svc_normal_to_secure_shm_thread() - the function to run in the kthread
+ * @data: data pointer for kthread function
+ *
+ * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU
+ * node 0, its function stratix10_svc_secure_shm_thread is used to query the
+ * physical address of memory block reserved by secure monitor software at
+ * secure world.
+ *
+ * svc_normal_to_secure_shm_thread() calls do_exit() directly since it is a
+ * standlone thread for which no one will call kthread_stop() or return when
+ * 'kthread_should_stop()' is true.
+ */
+static int svc_normal_to_secure_shm_thread(void *data)
+{
+	struct stratix10_svc_sh_memory
+			*sh_mem = (struct stratix10_svc_sh_memory *)data;
+	struct arm_smccc_res res;
+
+	/* SMC or HVC call to get shared memory info from secure world */
+	sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM,
+			  0, 0, 0, 0, 0, 0, 0, &res);
+	if (res.a0 == INTEL_SIP_SMC_STATUS_OK) {
+		sh_mem->addr = res.a1;
+		sh_mem->size = res.a2;
+	} else {
+		pr_err("%s: after SMC call -- res.a0=0x%016x",  __func__,
+		       (unsigned int)res.a0);
+		sh_mem->addr = 0;
+		sh_mem->size = 0;
+	}
+
+	complete(&sh_mem->sync_complete);
+	do_exit(0);
+}
+
+/**
+ * svc_get_sh_memory() - get memory block reserved by secure monitor SW
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: zero for successfully getting the physical address of memory block
+ * reserved by secure monitor software, or negative value on error.
+ */
+static int svc_get_sh_memory(struct platform_device *pdev,
+				    struct stratix10_svc_sh_memory *sh_memory)
+{
+	struct device *dev = &pdev->dev;
+	struct task_struct *sh_memory_task;
+	unsigned int cpu = 0;
+
+	init_completion(&sh_memory->sync_complete);
+
+	/* smc or hvc call happens on cpu 0 bound kthread */
+	sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread,
+					       (void *)sh_memory,
+						cpu_to_node(cpu),
+						"svc_smc_hvc_shm_thread");
+	if (IS_ERR(sh_memory_task)) {
+		dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n");
+		return -EINVAL;
+	}
+
+	wake_up_process(sh_memory_task);
+
+	if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) {
+		dev_err(dev,
+			"timeout to get sh-memory paras from secure world\n");
+		return -ETIMEDOUT;
+	}
+
+	if (!sh_memory->addr || !sh_memory->size) {
+		dev_err(dev,
+			"failed to get shared memory info from secure world\n");
+		return -ENOMEM;
+	}
+
+	dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n",
+		(unsigned int)sh_memory->addr,
+		(unsigned int)sh_memory->size);
+
+	return 0;
+}
+
+/**
+ * svc_create_memory_pool() - create a memory pool from reserved memory block
+ * @pdev: pointer to service layer device
+ * @sh_memory: pointer to service shared memory structure
+ *
+ * Return: pool allocated from reserved memory block or ERR_PTR() on error.
+ */
+static struct gen_pool *
+svc_create_memory_pool(struct platform_device *pdev,
+		       struct stratix10_svc_sh_memory *sh_memory)
+{
+	struct device *dev = &pdev->dev;
+	struct gen_pool *genpool;
+	unsigned long vaddr;
+	phys_addr_t paddr;
+	size_t size;
+	phys_addr_t begin;
+	phys_addr_t end;
+	void *va;
+	size_t page_mask = PAGE_SIZE - 1;
+	int min_alloc_order = 3;
+	int ret;
+
+	begin = roundup(sh_memory->addr, PAGE_SIZE);
+	end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE);
+	paddr = begin;
+	size = end - begin;
+	va = devm_memremap(dev, paddr, size, MEMREMAP_WC);
+	if (IS_ERR(va)) {
+		dev_err(dev, "fail to remap shared memory\n");
+		return ERR_PTR(-EINVAL);
+	}
+	vaddr = (unsigned long)va;
+	dev_dbg(dev,
+		"reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n",
+		va, (unsigned int)paddr, (unsigned int)size);
+	if ((vaddr & page_mask) || (paddr & page_mask) ||
+	    (size & page_mask)) {
+		dev_err(dev, "page is not aligned\n");
+		return ERR_PTR(-EINVAL);
+	}
+	genpool = gen_pool_create(min_alloc_order, -1);
+	if (!genpool) {
+		dev_err(dev, "fail to create genpool\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	gen_pool_set_algo(genpool, gen_pool_best_fit, NULL);
+	ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1);
+	if (ret) {
+		dev_err(dev, "fail to add memory chunk to the pool\n");
+		gen_pool_destroy(genpool);
+		return ERR_PTR(ret);
+	}
+
+	return genpool;
+}
+
+/**
+ * svc_smccc_smc() - secure monitor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_smc(unsigned long a0, unsigned long a1,
+			  unsigned long a2, unsigned long a3,
+			  unsigned long a4, unsigned long a5,
+			  unsigned long a6, unsigned long a7,
+			  struct arm_smccc_res *res)
+{
+	arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * svc_smccc_hvc() - hypervisor call between normal and secure world
+ * @a0: argument passed in registers 0
+ * @a1: argument passed in registers 1
+ * @a2: argument passed in registers 2
+ * @a3: argument passed in registers 3
+ * @a4: argument passed in registers 4
+ * @a5: argument passed in registers 5
+ * @a6: argument passed in registers 6
+ * @a7: argument passed in registers 7
+ * @res: result values from register 0 to 3
+ */
+static void svc_smccc_hvc(unsigned long a0, unsigned long a1,
+			  unsigned long a2, unsigned long a3,
+			  unsigned long a4, unsigned long a5,
+			  unsigned long a6, unsigned long a7,
+			  struct arm_smccc_res *res)
+{
+	arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res);
+}
+
+/**
+ * get_invoke_func() - invoke SMC or HVC call
+ * @dev: pointer to device
+ *
+ * Return: function pointer to svc_smccc_smc or svc_smccc_hvc.
+ */
+static svc_invoke_fn *get_invoke_func(struct device *dev)
+{
+	const char *method;
+
+	if (of_property_read_string(dev->of_node, "method", &method)) {
+		dev_warn(dev, "missing \"method\" property\n");
+		return ERR_PTR(-ENXIO);
+	}
+
+	if (!strcmp(method, "smc"))
+		return svc_smccc_smc;
+	if (!strcmp(method, "hvc"))
+		return svc_smccc_hvc;
+
+	dev_warn(dev, "invalid \"method\" property: %s\n", method);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * stratix10_svc_request_channel_byname() - request a service channel
+ * @client: pointer to service client
+ * @name: service client name
+ *
+ * This function is used by service client to request a service channel.
+ *
+ * Return: a pointer to channel assigned to the client on success,
+ * or ERR_PTR() on error.
+ */
+struct stratix10_svc_chan *stratix10_svc_request_channel_byname(
+	struct stratix10_svc_client *client, const char *name)
+{
+	struct device *dev = client->dev;
+	struct stratix10_svc_controller *controller;
+	struct stratix10_svc_chan *chan = NULL;
+	unsigned long flag;
+	int i;
+
+	/* if probe was called after client's, or error on probe */
+	if (list_empty(&svc_ctrl))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	controller = list_first_entry(&svc_ctrl,
+				      struct stratix10_svc_controller, node);
+	for (i = 0; i < SVC_NUM_CHANNEL; i++) {
+		if (!strcmp(controller->chans[i].name, name)) {
+			chan = &controller->chans[i];
+			break;
+		}
+	}
+
+	/* if there was no channel match */
+	if (i == SVC_NUM_CHANNEL) {
+		dev_err(dev, "%s: channel not allocated\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (chan->scl || !try_module_get(controller->dev->driver->owner)) {
+		dev_dbg(dev, "%s: svc not free\n", __func__);
+		return ERR_PTR(-EBUSY);
+	}
+
+	spin_lock_irqsave(&chan->lock, flag);
+	chan->scl = client;
+	chan->ctrl->num_active_client++;
+	spin_unlock_irqrestore(&chan->lock, flag);
+
+	return chan;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname);
+
+/**
+ * stratix10_svc_free_channel() - free service channel
+ * @chan: service channel to be freed
+ *
+ * This function is used by service client to free a service channel.
+ */
+void stratix10_svc_free_channel(struct stratix10_svc_chan *chan)
+{
+	unsigned long flag;
+
+	spin_lock_irqsave(&chan->lock, flag);
+	chan->scl = NULL;
+	chan->ctrl->num_active_client--;
+	module_put(chan->ctrl->dev->driver->owner);
+	spin_unlock_irqrestore(&chan->lock, flag);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_channel);
+
+/**
+ * stratix10_svc_send() - send a message data to the remote
+ * @chan: service channel assigned to the client
+ * @msg: message data to be sent, in the format of
+ * "struct stratix10_svc_client_msg"
+ *
+ * This function is used by service client to add a message to the service
+ * layer driver's queue for being sent to the secure world.
+ *
+ * Return: 0 for success, -ENOMEM or -ENOBUFS on error.
+ */
+int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg)
+{
+	struct stratix10_svc_client_msg
+		*p_msg = (struct stratix10_svc_client_msg *)msg;
+	struct stratix10_svc_data_mem *p_mem;
+	struct stratix10_svc_data *p_data;
+	int ret = 0;
+	unsigned int cpu = 0;
+
+	p_data = kzalloc(sizeof(*p_data), GFP_KERNEL);
+	if (!p_data)
+		return -ENOMEM;
+
+	/* first client will create kernel thread */
+	if (!chan->ctrl->task) {
+		chan->ctrl->task =
+			kthread_create_on_node(svc_normal_to_secure_thread,
+					      (void *)chan->ctrl,
+					      cpu_to_node(cpu),
+					      "svc_smc_hvc_thread");
+			if (IS_ERR(chan->ctrl->task)) {
+				dev_err(chan->ctrl->dev,
+					"failed to create svc_smc_hvc_thread\n");
+				kfree(p_data);
+				return -EINVAL;
+			}
+		kthread_bind(chan->ctrl->task, cpu);
+		wake_up_process(chan->ctrl->task);
+	}
+
+	pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__,
+		 p_msg->payload, p_msg->command,
+		 (unsigned int)p_msg->payload_length);
+
+	if (list_empty(&svc_data_mem)) {
+		if (p_msg->command == COMMAND_RECONFIG) {
+			struct stratix10_svc_command_config_type *ct =
+				(struct stratix10_svc_command_config_type *)
+				p_msg->payload;
+			p_data->flag = ct->flags;
+		}
+	} else {
+		list_for_each_entry(p_mem, &svc_data_mem, node)
+			if (p_mem->vaddr == p_msg->payload) {
+				p_data->paddr = p_mem->paddr;
+				break;
+			}
+	}
+
+	p_data->command = p_msg->command;
+	p_data->arg[0] = p_msg->arg[0];
+	p_data->arg[1] = p_msg->arg[1];
+	p_data->arg[2] = p_msg->arg[2];
+	p_data->size = p_msg->payload_length;
+	p_data->chan = chan;
+	pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__,
+	       (unsigned int)p_data->paddr, p_data->command,
+	       (unsigned int)p_data->size);
+	ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data,
+				  sizeof(*p_data),
+				  &chan->ctrl->svc_fifo_lock);
+
+	kfree(p_data);
+
+	if (!ret)
+		return -ENOBUFS;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_send);
+
+/**
+ * stratix10_svc_done() - complete service request transactions
+ * @chan: service channel assigned to the client
+ *
+ * This function should be called when client has finished its request
+ * or there is an error in the request process. It allows the service layer
+ * to stop the running thread to have maximize savings in kernel resources.
+ */
+void stratix10_svc_done(struct stratix10_svc_chan *chan)
+{
+	/* stop thread when thread is running AND only one active client */
+	if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) {
+		pr_debug("svc_smc_hvc_shm_thread is stopped\n");
+		kthread_stop(chan->ctrl->task);
+		chan->ctrl->task = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_done);
+
+/**
+ * stratix10_svc_allocate_memory() - allocate memory
+ * @chan: service channel assigned to the client
+ * @size: memory size requested by a specific service client
+ *
+ * Service layer allocates the requested number of bytes buffer from the
+ * memory pool, service client uses this function to get allocated buffers.
+ *
+ * Return: address of allocated memory on success, or ERR_PTR() on error.
+ */
+void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan,
+				    size_t size)
+{
+	struct stratix10_svc_data_mem *pmem;
+	unsigned long va;
+	phys_addr_t pa;
+	struct gen_pool *genpool = chan->ctrl->genpool;
+	size_t s = roundup(size, 1 << genpool->min_alloc_order);
+
+	pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL);
+	if (!pmem)
+		return ERR_PTR(-ENOMEM);
+
+	va = gen_pool_alloc(genpool, s);
+	if (!va)
+		return ERR_PTR(-ENOMEM);
+
+	memset((void *)va, 0, s);
+	pa = gen_pool_virt_to_phys(genpool, va);
+
+	pmem->vaddr = (void *)va;
+	pmem->paddr = pa;
+	pmem->size = s;
+	list_add_tail(&pmem->node, &svc_data_mem);
+	pr_debug("%s: va=%p, pa=0x%016x\n", __func__,
+		 pmem->vaddr, (unsigned int)pmem->paddr);
+
+	return (void *)va;
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory);
+
+/**
+ * stratix10_svc_free_memory() - free allocated memory
+ * @chan: service channel assigned to the client
+ * @kaddr: memory to be freed
+ *
+ * This function is used by service client to free allocated buffers.
+ */
+void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr)
+{
+	struct stratix10_svc_data_mem *pmem;
+
+	list_for_each_entry(pmem, &svc_data_mem, node)
+		if (pmem->vaddr == kaddr) {
+			gen_pool_free(chan->ctrl->genpool,
+				       (unsigned long)kaddr, pmem->size);
+			pmem->vaddr = NULL;
+			list_del(&pmem->node);
+			return;
+		}
+
+	list_del(&svc_data_mem);
+}
+EXPORT_SYMBOL_GPL(stratix10_svc_free_memory);
+
+static const struct of_device_id stratix10_svc_drv_match[] = {
+	{.compatible = "intel,stratix10-svc"},
+	{.compatible = "intel,agilex-svc"},
+	{},
+};
+
+static int stratix10_svc_drv_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stratix10_svc_controller *controller;
+	struct stratix10_svc_chan *chans;
+	struct gen_pool *genpool;
+	struct stratix10_svc_sh_memory *sh_memory;
+	struct stratix10_svc *svc;
+
+	svc_invoke_fn *invoke_fn;
+	size_t fifo_size;
+	int ret;
+
+	/* get SMC or HVC function */
+	invoke_fn = get_invoke_func(dev);
+	if (IS_ERR(invoke_fn))
+		return -EINVAL;
+
+	sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL);
+	if (!sh_memory)
+		return -ENOMEM;
+
+	sh_memory->invoke_fn = invoke_fn;
+	ret = svc_get_sh_memory(pdev, sh_memory);
+	if (ret)
+		return ret;
+
+	genpool = svc_create_memory_pool(pdev, sh_memory);
+	if (IS_ERR(genpool))
+		return PTR_ERR(genpool);
+
+	/* allocate service controller and supporting channel */
+	controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
+	if (!controller)
+		return -ENOMEM;
+
+	chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL,
+				   sizeof(*chans), GFP_KERNEL | __GFP_ZERO);
+	if (!chans)
+		return -ENOMEM;
+
+	controller->dev = dev;
+	controller->num_chans = SVC_NUM_CHANNEL;
+	controller->num_active_client = 0;
+	controller->chans = chans;
+	controller->genpool = genpool;
+	controller->task = NULL;
+	controller->invoke_fn = invoke_fn;
+	init_completion(&controller->complete_status);
+
+	fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO;
+	ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev, "failed to allocate FIFO\n");
+		return ret;
+	}
+	spin_lock_init(&controller->svc_fifo_lock);
+
+	chans[0].scl = NULL;
+	chans[0].ctrl = controller;
+	chans[0].name = SVC_CLIENT_FPGA;
+	spin_lock_init(&chans[0].lock);
+
+	chans[1].scl = NULL;
+	chans[1].ctrl = controller;
+	chans[1].name = SVC_CLIENT_RSU;
+	spin_lock_init(&chans[1].lock);
+
+	list_add_tail(&controller->node, &svc_ctrl);
+	platform_set_drvdata(pdev, controller);
+
+	/* add svc client device(s) */
+	svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL);
+	if (!svc) {
+		ret = -ENOMEM;
+		goto err_free_kfifo;
+	}
+
+	svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0);
+	if (!svc->stratix10_svc_rsu) {
+		dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU);
+		ret = -ENOMEM;
+		goto err_free_kfifo;
+	}
+
+	ret = platform_device_add(svc->stratix10_svc_rsu);
+	if (ret)
+		goto err_put_device;
+
+	dev_set_drvdata(dev, svc);
+
+	pr_info("Intel Service Layer Driver Initialized\n");
+
+	return 0;
+
+err_put_device:
+	platform_device_put(svc->stratix10_svc_rsu);
+err_free_kfifo:
+	kfifo_free(&controller->svc_fifo);
+	return ret;
+}
+
+static int stratix10_svc_drv_remove(struct platform_device *pdev)
+{
+	struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev);
+	struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev);
+
+	platform_device_unregister(svc->stratix10_svc_rsu);
+
+	kfifo_free(&ctrl->svc_fifo);
+	if (ctrl->task) {
+		kthread_stop(ctrl->task);
+		ctrl->task = NULL;
+	}
+	if (ctrl->genpool)
+		gen_pool_destroy(ctrl->genpool);
+	list_del(&ctrl->node);
+
+	return 0;
+}
+
+static struct platform_driver stratix10_svc_driver = {
+	.probe = stratix10_svc_drv_probe,
+	.remove = stratix10_svc_drv_remove,
+	.driver = {
+		.name = "stratix10-svc",
+		.of_match_table = stratix10_svc_drv_match,
+	},
+};
+
+static int __init stratix10_svc_init(void)
+{
+	struct device_node *fw_np;
+	struct device_node *np;
+	int ret;
+
+	fw_np = of_find_node_by_name(NULL, "firmware");
+	if (!fw_np)
+		return -ENODEV;
+
+	np = of_find_matching_node(fw_np, stratix10_svc_drv_match);
+	if (!np)
+		return -ENODEV;
+
+	of_node_put(np);
+	ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL);
+	if (ret)
+		return ret;
+
+	return platform_driver_register(&stratix10_svc_driver);
+}
+
+static void __exit stratix10_svc_exit(void)
+{
+	return platform_driver_unregister(&stratix10_svc_driver);
+}
+
+subsys_initcall(stratix10_svc_init);
+module_exit(stratix10_svc_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver");
+MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>");
+MODULE_ALIAS("platform:stratix10-svc");
diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
new file mode 100644
index 000000000..1c8ba1f47
--- /dev/null
+++ b/drivers/firmware/tegra/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Tegra firmware driver"
+
+config TEGRA_IVC
+	bool "Tegra IVC protocol"
+	depends on ARCH_TEGRA
+	help
+	  IVC (Inter-VM Communication) protocol is part of the IPC
+	  (Inter Processor Communication) framework on Tegra. It maintains the
+	  data and the different communication channels in SysRAM or RAM and
+	  keeps the content is synchronization between host CPU and remote
+	  processors.
+
+config TEGRA_BPMP
+	bool "Tegra BPMP driver"
+	depends on ARCH_TEGRA && TEGRA_HSP_MBOX && TEGRA_IVC
+	help
+	  BPMP (Boot and Power Management Processor) is designed to off-loading
+	  the PM functions which include clock/DVFS/thermal/power from the CPU.
+	  It needs HSP as the HW synchronization and notification module and
+	  IVC module as the message communication protocol.
+
+	  This driver manages the IPC interface between host CPU and the
+	  firmware running on BPMP.
+
+endmenu
diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
new file mode 100644
index 000000000..620cf3fdd
--- /dev/null
+++ b/drivers/firmware/tegra/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+tegra-bpmp-y			= bpmp.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC)	+= bpmp-tegra210.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC)	+= bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_DEBUG_FS)	+= bpmp-debugfs.o
+obj-$(CONFIG_TEGRA_BPMP)	+= tegra-bpmp.o
+obj-$(CONFIG_TEGRA_IVC)		+= ivc.o
diff --git a/drivers/firmware/tegra/bpmp-debugfs.c b/drivers/firmware/tegra/bpmp-debugfs.c
new file mode 100644
index 000000000..fad97ec8e
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp-debugfs.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, NVIDIA CORPORATION.  All rights reserved.
+ */
+#include <linux/debugfs.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+
+static DEFINE_MUTEX(bpmp_debug_lock);
+
+struct seqbuf {
+	char *buf;
+	size_t pos;
+	size_t size;
+};
+
+static void seqbuf_init(struct seqbuf *seqbuf, void *buf, size_t size)
+{
+	seqbuf->buf = buf;
+	seqbuf->size = size;
+	seqbuf->pos = 0;
+}
+
+static size_t seqbuf_avail(struct seqbuf *seqbuf)
+{
+	return seqbuf->pos < seqbuf->size ? seqbuf->size - seqbuf->pos : 0;
+}
+
+static size_t seqbuf_status(struct seqbuf *seqbuf)
+{
+	return seqbuf->pos <= seqbuf->size ? 0 : -EOVERFLOW;
+}
+
+static int seqbuf_eof(struct seqbuf *seqbuf)
+{
+	return seqbuf->pos >= seqbuf->size;
+}
+
+static int seqbuf_read(struct seqbuf *seqbuf, void *buf, size_t nbyte)
+{
+	nbyte = min(nbyte, seqbuf_avail(seqbuf));
+	memcpy(buf, seqbuf->buf + seqbuf->pos, nbyte);
+	seqbuf->pos += nbyte;
+	return seqbuf_status(seqbuf);
+}
+
+static int seqbuf_read_u32(struct seqbuf *seqbuf, uint32_t *v)
+{
+	int err;
+
+	err = seqbuf_read(seqbuf, v, 4);
+	*v = le32_to_cpu(*v);
+	return err;
+}
+
+static int seqbuf_read_str(struct seqbuf *seqbuf, const char **str)
+{
+	*str = seqbuf->buf + seqbuf->pos;
+	seqbuf->pos += strnlen(*str, seqbuf_avail(seqbuf));
+	seqbuf->pos++;
+	return seqbuf_status(seqbuf);
+}
+
+static void seqbuf_seek(struct seqbuf *seqbuf, ssize_t offset)
+{
+	seqbuf->pos += offset;
+}
+
+/* map filename in Linux debugfs to corresponding entry in BPMP */
+static const char *get_filename(struct tegra_bpmp *bpmp,
+				const struct file *file, char *buf, int size)
+{
+	char root_path_buf[512];
+	const char *root_path;
+	const char *filename;
+	size_t root_len;
+
+	root_path = dentry_path(bpmp->debugfs_mirror, root_path_buf,
+				sizeof(root_path_buf));
+	if (IS_ERR(root_path))
+		return NULL;
+
+	root_len = strlen(root_path);
+
+	filename = dentry_path(file->f_path.dentry, buf, size);
+	if (IS_ERR(filename))
+		return NULL;
+
+	if (strlen(filename) < root_len ||
+			strncmp(filename, root_path, root_len))
+		return NULL;
+
+	filename += root_len;
+
+	return filename;
+}
+
+static int mrq_debug_open(struct tegra_bpmp *bpmp, const char *name,
+			  uint32_t *fd, uint32_t *len, bool write)
+{
+	struct mrq_debug_request req = {
+		.cmd = cpu_to_le32(write ? CMD_DEBUG_OPEN_WO : CMD_DEBUG_OPEN_RO),
+	};
+	struct mrq_debug_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUG,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	ssize_t sz_name;
+	int err = 0;
+
+	sz_name = strscpy(req.fop.name, name, sizeof(req.fop.name));
+	if (sz_name < 0) {
+		pr_err("File name too large: %s\n", name);
+		return -EINVAL;
+	}
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return err;
+	else if (msg.rx.ret < 0)
+		return -EINVAL;
+
+	*len = resp.fop.datalen;
+	*fd = resp.fop.fd;
+
+	return 0;
+}
+
+static int mrq_debug_close(struct tegra_bpmp *bpmp, uint32_t fd)
+{
+	struct mrq_debug_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUG_CLOSE),
+		.frd = {
+			.fd = fd,
+		},
+	};
+	struct mrq_debug_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUG,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	int err = 0;
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return err;
+	else if (msg.rx.ret < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int mrq_debug_read(struct tegra_bpmp *bpmp, const char *name,
+			  char *data, size_t sz_data, uint32_t *nbytes)
+{
+	struct mrq_debug_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUG_READ),
+	};
+	struct mrq_debug_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUG,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	uint32_t fd = 0, len = 0;
+	int remaining, err;
+
+	mutex_lock(&bpmp_debug_lock);
+	err = mrq_debug_open(bpmp, name, &fd, &len, 0);
+	if (err)
+		goto out;
+
+	if (len > sz_data) {
+		err = -EFBIG;
+		goto close;
+	}
+
+	req.frd.fd = fd;
+	remaining = len;
+
+	while (remaining > 0) {
+		err = tegra_bpmp_transfer(bpmp, &msg);
+		if (err < 0) {
+			goto close;
+		} else if (msg.rx.ret < 0) {
+			err = -EINVAL;
+			goto close;
+		}
+
+		if (resp.frd.readlen > remaining) {
+			pr_err("%s: read data length invalid\n", __func__);
+			err = -EINVAL;
+			goto close;
+		}
+
+		memcpy(data, resp.frd.data, resp.frd.readlen);
+		data += resp.frd.readlen;
+		remaining -= resp.frd.readlen;
+	}
+
+	*nbytes = len;
+
+close:
+	err = mrq_debug_close(bpmp, fd);
+out:
+	mutex_unlock(&bpmp_debug_lock);
+	return err;
+}
+
+static int mrq_debug_write(struct tegra_bpmp *bpmp, const char *name,
+			   uint8_t *data, size_t sz_data)
+{
+	struct mrq_debug_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUG_WRITE)
+	};
+	struct mrq_debug_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUG,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	uint32_t fd = 0, len = 0;
+	size_t remaining;
+	int err;
+
+	mutex_lock(&bpmp_debug_lock);
+	err = mrq_debug_open(bpmp, name, &fd, &len, 1);
+	if (err)
+		goto out;
+
+	if (sz_data > len) {
+		err = -EINVAL;
+		goto close;
+	}
+
+	req.fwr.fd = fd;
+	remaining = sz_data;
+
+	while (remaining > 0) {
+		len = min(remaining, sizeof(req.fwr.data));
+		memcpy(req.fwr.data, data, len);
+		req.fwr.datalen = len;
+
+		err = tegra_bpmp_transfer(bpmp, &msg);
+		if (err < 0) {
+			goto close;
+		} else if (msg.rx.ret < 0) {
+			err = -EINVAL;
+			goto close;
+		}
+
+		data += req.fwr.datalen;
+		remaining -= req.fwr.datalen;
+	}
+
+close:
+	err = mrq_debug_close(bpmp, fd);
+out:
+	mutex_unlock(&bpmp_debug_lock);
+	return err;
+}
+
+static int bpmp_debug_show(struct seq_file *m, void *p)
+{
+	struct file *file = m->private;
+	struct inode *inode = file_inode(file);
+	struct tegra_bpmp *bpmp = inode->i_private;
+	char *databuf = NULL;
+	char fnamebuf[256];
+	const char *filename;
+	uint32_t nbytes = 0;
+	size_t len;
+	int err;
+
+	len = seq_get_buf(m, &databuf);
+	if (!databuf)
+		return -ENOMEM;
+
+	filename = get_filename(bpmp, file, fnamebuf, sizeof(fnamebuf));
+	if (!filename)
+		return -ENOENT;
+
+	err = mrq_debug_read(bpmp, filename, databuf, len, &nbytes);
+	if (!err)
+		seq_commit(m, nbytes);
+
+	return err;
+}
+
+static ssize_t bpmp_debug_store(struct file *file, const char __user *buf,
+		size_t count, loff_t *f_pos)
+{
+	struct inode *inode = file_inode(file);
+	struct tegra_bpmp *bpmp = inode->i_private;
+	char *databuf = NULL;
+	char fnamebuf[256];
+	const char *filename;
+	ssize_t err;
+
+	filename = get_filename(bpmp, file, fnamebuf, sizeof(fnamebuf));
+	if (!filename)
+		return -ENOENT;
+
+	databuf = kmalloc(count, GFP_KERNEL);
+	if (!databuf)
+		return -ENOMEM;
+
+	if (copy_from_user(databuf, buf, count)) {
+		err = -EFAULT;
+		goto free_ret;
+	}
+
+	err = mrq_debug_write(bpmp, filename, databuf, count);
+
+free_ret:
+	kfree(databuf);
+
+	return err ?: count;
+}
+
+static int bpmp_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open_size(file, bpmp_debug_show, file, SZ_256K);
+}
+
+static const struct file_operations bpmp_debug_fops = {
+	.open		= bpmp_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.write		= bpmp_debug_store,
+	.release	= single_release,
+};
+
+static int bpmp_populate_debugfs_inband(struct tegra_bpmp *bpmp,
+					struct dentry *parent,
+					char *ppath)
+{
+	const size_t pathlen = SZ_256;
+	const size_t bufsize = SZ_16K;
+	uint32_t dsize, attrs = 0;
+	struct dentry *dentry;
+	struct seqbuf seqbuf;
+	char *buf, *pathbuf;
+	const char *name;
+	int err = 0;
+
+	if (!bpmp || !parent || !ppath)
+		return -EINVAL;
+
+	buf = kmalloc(bufsize, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pathbuf = kzalloc(pathlen, GFP_KERNEL);
+	if (!pathbuf) {
+		kfree(buf);
+		return -ENOMEM;
+	}
+
+	err = mrq_debug_read(bpmp, ppath, buf, bufsize, &dsize);
+	if (err)
+		goto out;
+
+	seqbuf_init(&seqbuf, buf, dsize);
+
+	while (!seqbuf_eof(&seqbuf)) {
+		err = seqbuf_read_u32(&seqbuf, &attrs);
+		if (err)
+			goto out;
+
+		err = seqbuf_read_str(&seqbuf, &name);
+		if (err < 0)
+			goto out;
+
+		if (attrs & DEBUGFS_S_ISDIR) {
+			size_t len;
+
+			dentry = debugfs_create_dir(name, parent);
+			if (IS_ERR(dentry)) {
+				err = PTR_ERR(dentry);
+				goto out;
+			}
+
+			len = snprintf(pathbuf, pathlen, "%s%s/", ppath, name);
+			if (len >= pathlen) {
+				err = -EINVAL;
+				goto out;
+			}
+
+			err = bpmp_populate_debugfs_inband(bpmp, dentry,
+							   pathbuf);
+			if (err < 0)
+				goto out;
+		} else {
+			umode_t mode;
+
+			mode = attrs & DEBUGFS_S_IRUSR ? 0400 : 0;
+			mode |= attrs & DEBUGFS_S_IWUSR ? 0200 : 0;
+			dentry = debugfs_create_file(name, mode, parent, bpmp,
+						     &bpmp_debug_fops);
+			if (IS_ERR(dentry)) {
+				err = -ENOMEM;
+				goto out;
+			}
+		}
+	}
+
+out:
+	kfree(pathbuf);
+	kfree(buf);
+
+	return err;
+}
+
+static int mrq_debugfs_read(struct tegra_bpmp *bpmp,
+			    dma_addr_t name, size_t sz_name,
+			    dma_addr_t data, size_t sz_data,
+			    size_t *nbytes)
+{
+	struct mrq_debugfs_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUGFS_READ),
+		.fop = {
+			.fnameaddr = cpu_to_le32((uint32_t)name),
+			.fnamelen = cpu_to_le32((uint32_t)sz_name),
+			.dataaddr = cpu_to_le32((uint32_t)data),
+			.datalen = cpu_to_le32((uint32_t)sz_data),
+		},
+	};
+	struct mrq_debugfs_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUGFS,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	int err;
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return err;
+	else if (msg.rx.ret < 0)
+		return -EINVAL;
+
+	*nbytes = (size_t)resp.fop.nbytes;
+
+	return 0;
+}
+
+static int mrq_debugfs_write(struct tegra_bpmp *bpmp,
+			     dma_addr_t name, size_t sz_name,
+			     dma_addr_t data, size_t sz_data)
+{
+	const struct mrq_debugfs_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUGFS_WRITE),
+		.fop = {
+			.fnameaddr = cpu_to_le32((uint32_t)name),
+			.fnamelen = cpu_to_le32((uint32_t)sz_name),
+			.dataaddr = cpu_to_le32((uint32_t)data),
+			.datalen = cpu_to_le32((uint32_t)sz_data),
+		},
+	};
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUGFS,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+	};
+
+	return tegra_bpmp_transfer(bpmp, &msg);
+}
+
+static int mrq_debugfs_dumpdir(struct tegra_bpmp *bpmp, dma_addr_t addr,
+			       size_t size, size_t *nbytes)
+{
+	const struct mrq_debugfs_request req = {
+		.cmd = cpu_to_le32(CMD_DEBUGFS_DUMPDIR),
+		.dumpdir = {
+			.dataaddr = cpu_to_le32((uint32_t)addr),
+			.datalen = cpu_to_le32((uint32_t)size),
+		},
+	};
+	struct mrq_debugfs_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_DEBUGFS,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	int err;
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return err;
+	else if (msg.rx.ret < 0)
+		return -EINVAL;
+
+	*nbytes = (size_t)resp.dumpdir.nbytes;
+
+	return 0;
+}
+
+static int debugfs_show(struct seq_file *m, void *p)
+{
+	struct file *file = m->private;
+	struct inode *inode = file_inode(file);
+	struct tegra_bpmp *bpmp = inode->i_private;
+	const size_t datasize = m->size;
+	const size_t namesize = SZ_256;
+	void *datavirt, *namevirt;
+	dma_addr_t dataphys, namephys;
+	char buf[256];
+	const char *filename;
+	size_t len, nbytes;
+	int err;
+
+	filename = get_filename(bpmp, file, buf, sizeof(buf));
+	if (!filename)
+		return -ENOENT;
+
+	namevirt = dma_alloc_coherent(bpmp->dev, namesize, &namephys,
+				      GFP_KERNEL | GFP_DMA32);
+	if (!namevirt)
+		return -ENOMEM;
+
+	datavirt = dma_alloc_coherent(bpmp->dev, datasize, &dataphys,
+				      GFP_KERNEL | GFP_DMA32);
+	if (!datavirt) {
+		err = -ENOMEM;
+		goto free_namebuf;
+	}
+
+	len = strlen(filename);
+	strncpy(namevirt, filename, namesize);
+
+	err = mrq_debugfs_read(bpmp, namephys, len, dataphys, datasize,
+			       &nbytes);
+
+	if (!err)
+		seq_write(m, datavirt, nbytes);
+
+	dma_free_coherent(bpmp->dev, datasize, datavirt, dataphys);
+free_namebuf:
+	dma_free_coherent(bpmp->dev, namesize, namevirt, namephys);
+
+	return err;
+}
+
+static int debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open_size(file, debugfs_show, file, SZ_128K);
+}
+
+static ssize_t debugfs_store(struct file *file, const char __user *buf,
+		size_t count, loff_t *f_pos)
+{
+	struct inode *inode = file_inode(file);
+	struct tegra_bpmp *bpmp = inode->i_private;
+	const size_t datasize = count;
+	const size_t namesize = SZ_256;
+	void *datavirt, *namevirt;
+	dma_addr_t dataphys, namephys;
+	char fnamebuf[256];
+	const char *filename;
+	size_t len;
+	int err;
+
+	filename = get_filename(bpmp, file, fnamebuf, sizeof(fnamebuf));
+	if (!filename)
+		return -ENOENT;
+
+	namevirt = dma_alloc_coherent(bpmp->dev, namesize, &namephys,
+				      GFP_KERNEL | GFP_DMA32);
+	if (!namevirt)
+		return -ENOMEM;
+
+	datavirt = dma_alloc_coherent(bpmp->dev, datasize, &dataphys,
+				      GFP_KERNEL | GFP_DMA32);
+	if (!datavirt) {
+		err = -ENOMEM;
+		goto free_namebuf;
+	}
+
+	len = strlen(filename);
+	strncpy(namevirt, filename, namesize);
+
+	if (copy_from_user(datavirt, buf, count)) {
+		err = -EFAULT;
+		goto free_databuf;
+	}
+
+	err = mrq_debugfs_write(bpmp, namephys, len, dataphys,
+				count);
+
+free_databuf:
+	dma_free_coherent(bpmp->dev, datasize, datavirt, dataphys);
+free_namebuf:
+	dma_free_coherent(bpmp->dev, namesize, namevirt, namephys);
+
+	return err ?: count;
+}
+
+static const struct file_operations debugfs_fops = {
+	.open		= debugfs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.write		= debugfs_store,
+	.release	= single_release,
+};
+
+static int bpmp_populate_dir(struct tegra_bpmp *bpmp, struct seqbuf *seqbuf,
+			     struct dentry *parent, uint32_t depth)
+{
+	int err;
+	uint32_t d, t;
+	const char *name;
+	struct dentry *dentry;
+
+	while (!seqbuf_eof(seqbuf)) {
+		err = seqbuf_read_u32(seqbuf, &d);
+		if (err < 0)
+			return err;
+
+		if (d < depth) {
+			seqbuf_seek(seqbuf, -4);
+			/* go up a level */
+			return 0;
+		} else if (d != depth) {
+			/* malformed data received from BPMP */
+			return -EIO;
+		}
+
+		err = seqbuf_read_u32(seqbuf, &t);
+		if (err < 0)
+			return err;
+		err = seqbuf_read_str(seqbuf, &name);
+		if (err < 0)
+			return err;
+
+		if (t & DEBUGFS_S_ISDIR) {
+			dentry = debugfs_create_dir(name, parent);
+			if (IS_ERR(dentry))
+				return -ENOMEM;
+			err = bpmp_populate_dir(bpmp, seqbuf, dentry, depth+1);
+			if (err < 0)
+				return err;
+		} else {
+			umode_t mode;
+
+			mode = t & DEBUGFS_S_IRUSR ? S_IRUSR : 0;
+			mode |= t & DEBUGFS_S_IWUSR ? S_IWUSR : 0;
+			dentry = debugfs_create_file(name, mode,
+						     parent, bpmp,
+						     &debugfs_fops);
+			if (IS_ERR(dentry))
+				return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static int bpmp_populate_debugfs_shmem(struct tegra_bpmp *bpmp)
+{
+	struct seqbuf seqbuf;
+	const size_t sz = SZ_512K;
+	dma_addr_t phys;
+	size_t nbytes;
+	void *virt;
+	int err;
+
+	virt = dma_alloc_coherent(bpmp->dev, sz, &phys,
+				  GFP_KERNEL | GFP_DMA32);
+	if (!virt)
+		return -ENOMEM;
+
+	err = mrq_debugfs_dumpdir(bpmp, phys, sz, &nbytes);
+	if (err < 0) {
+		goto free;
+	} else if (nbytes > sz) {
+		err = -EINVAL;
+		goto free;
+	}
+
+	seqbuf_init(&seqbuf, virt, nbytes);
+	err = bpmp_populate_dir(bpmp, &seqbuf, bpmp->debugfs_mirror, 0);
+free:
+	dma_free_coherent(bpmp->dev, sz, virt, phys);
+
+	return err;
+}
+
+int tegra_bpmp_init_debugfs(struct tegra_bpmp *bpmp)
+{
+	struct dentry *root;
+	bool inband;
+	int err;
+
+	inband = tegra_bpmp_mrq_is_supported(bpmp, MRQ_DEBUG);
+
+	if (!inband && !tegra_bpmp_mrq_is_supported(bpmp, MRQ_DEBUGFS))
+		return 0;
+
+	root = debugfs_create_dir("bpmp", NULL);
+	if (IS_ERR(root))
+		return -ENOMEM;
+
+	bpmp->debugfs_mirror = debugfs_create_dir("debug", root);
+	if (IS_ERR(bpmp->debugfs_mirror)) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	if (inband)
+		err = bpmp_populate_debugfs_inband(bpmp, bpmp->debugfs_mirror,
+						   "/");
+	else
+		err = bpmp_populate_debugfs_shmem(bpmp);
+
+out:
+	if (err < 0)
+		debugfs_remove_recursive(root);
+
+	return err;
+}
diff --git a/drivers/firmware/tegra/bpmp-private.h b/drivers/firmware/tegra/bpmp-private.h
new file mode 100644
index 000000000..182bfe396
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp-private.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, NVIDIA CORPORATION.
+ */
+
+#ifndef __FIRMWARE_TEGRA_BPMP_PRIVATE_H
+#define __FIRMWARE_TEGRA_BPMP_PRIVATE_H
+
+#include <soc/tegra/bpmp.h>
+
+struct tegra_bpmp_ops {
+	int (*init)(struct tegra_bpmp *bpmp);
+	void (*deinit)(struct tegra_bpmp *bpmp);
+	bool (*is_response_ready)(struct tegra_bpmp_channel *channel);
+	bool (*is_request_ready)(struct tegra_bpmp_channel *channel);
+	int (*ack_response)(struct tegra_bpmp_channel *channel);
+	int (*ack_request)(struct tegra_bpmp_channel *channel);
+	bool (*is_response_channel_free)(struct tegra_bpmp_channel *channel);
+	bool (*is_request_channel_free)(struct tegra_bpmp_channel *channel);
+	int (*post_response)(struct tegra_bpmp_channel *channel);
+	int (*post_request)(struct tegra_bpmp_channel *channel);
+	int (*ring_doorbell)(struct tegra_bpmp *bpmp);
+	int (*resume)(struct tegra_bpmp *bpmp);
+};
+
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
+extern const struct tegra_bpmp_ops tegra186_bpmp_ops;
+#endif
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
+extern const struct tegra_bpmp_ops tegra210_bpmp_ops;
+#endif
+
+#endif
diff --git a/drivers/firmware/tegra/bpmp-tegra186.c b/drivers/firmware/tegra/bpmp-tegra186.c
new file mode 100644
index 000000000..63ab21d89
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp-tegra186.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, NVIDIA CORPORATION.
+ */
+
+#include <linux/genalloc.h>
+#include <linux/mailbox_client.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+#include <soc/tegra/ivc.h>
+
+#include "bpmp-private.h"
+
+struct tegra186_bpmp {
+	struct tegra_bpmp *parent;
+
+	struct {
+		struct gen_pool *pool;
+		dma_addr_t phys;
+		void *virt;
+	} tx, rx;
+
+	struct {
+		struct mbox_client client;
+		struct mbox_chan *channel;
+	} mbox;
+};
+
+static inline struct tegra_bpmp *
+mbox_client_to_bpmp(struct mbox_client *client)
+{
+	struct tegra186_bpmp *priv;
+
+	priv = container_of(client, struct tegra186_bpmp, mbox.client);
+
+	return priv->parent;
+}
+
+static bool tegra186_bpmp_is_message_ready(struct tegra_bpmp_channel *channel)
+{
+	void *frame;
+
+	frame = tegra_ivc_read_get_next_frame(channel->ivc);
+	if (IS_ERR(frame)) {
+		channel->ib = NULL;
+		return false;
+	}
+
+	channel->ib = frame;
+
+	return true;
+}
+
+static bool tegra186_bpmp_is_channel_free(struct tegra_bpmp_channel *channel)
+{
+	void *frame;
+
+	frame = tegra_ivc_write_get_next_frame(channel->ivc);
+	if (IS_ERR(frame)) {
+		channel->ob = NULL;
+		return false;
+	}
+
+	channel->ob = frame;
+
+	return true;
+}
+
+static int tegra186_bpmp_ack_message(struct tegra_bpmp_channel *channel)
+{
+	return tegra_ivc_read_advance(channel->ivc);
+}
+
+static int tegra186_bpmp_post_message(struct tegra_bpmp_channel *channel)
+{
+	return tegra_ivc_write_advance(channel->ivc);
+}
+
+static int tegra186_bpmp_ring_doorbell(struct tegra_bpmp *bpmp)
+{
+	struct tegra186_bpmp *priv = bpmp->priv;
+	int err;
+
+	err = mbox_send_message(priv->mbox.channel, NULL);
+	if (err < 0)
+		return err;
+
+	mbox_client_txdone(priv->mbox.channel, 0);
+
+	return 0;
+}
+
+static void tegra186_bpmp_ivc_notify(struct tegra_ivc *ivc, void *data)
+{
+	struct tegra_bpmp *bpmp = data;
+	struct tegra186_bpmp *priv = bpmp->priv;
+
+	if (WARN_ON(priv->mbox.channel == NULL))
+		return;
+
+	tegra186_bpmp_ring_doorbell(bpmp);
+}
+
+static int tegra186_bpmp_channel_init(struct tegra_bpmp_channel *channel,
+				      struct tegra_bpmp *bpmp,
+				      unsigned int index)
+{
+	struct tegra186_bpmp *priv = bpmp->priv;
+	size_t message_size, queue_size;
+	unsigned int offset;
+	int err;
+
+	channel->ivc = devm_kzalloc(bpmp->dev, sizeof(*channel->ivc),
+				    GFP_KERNEL);
+	if (!channel->ivc)
+		return -ENOMEM;
+
+	message_size = tegra_ivc_align(MSG_MIN_SZ);
+	queue_size = tegra_ivc_total_queue_size(message_size);
+	offset = queue_size * index;
+
+	err = tegra_ivc_init(channel->ivc, NULL,
+			     priv->rx.virt + offset, priv->rx.phys + offset,
+			     priv->tx.virt + offset, priv->tx.phys + offset,
+			     1, message_size, tegra186_bpmp_ivc_notify,
+			     bpmp);
+	if (err < 0) {
+		dev_err(bpmp->dev, "failed to setup IVC for channel %u: %d\n",
+			index, err);
+		return err;
+	}
+
+	init_completion(&channel->completion);
+	channel->bpmp = bpmp;
+
+	return 0;
+}
+
+static void tegra186_bpmp_channel_reset(struct tegra_bpmp_channel *channel)
+{
+	/* reset the channel state */
+	tegra_ivc_reset(channel->ivc);
+
+	/* sync the channel state with BPMP */
+	while (tegra_ivc_notified(channel->ivc))
+		;
+}
+
+static void tegra186_bpmp_channel_cleanup(struct tegra_bpmp_channel *channel)
+{
+	tegra_ivc_cleanup(channel->ivc);
+}
+
+static void mbox_handle_rx(struct mbox_client *client, void *data)
+{
+	struct tegra_bpmp *bpmp = mbox_client_to_bpmp(client);
+
+	tegra_bpmp_handle_rx(bpmp);
+}
+
+static int tegra186_bpmp_init(struct tegra_bpmp *bpmp)
+{
+	struct tegra186_bpmp *priv;
+	unsigned int i;
+	int err;
+
+	priv = devm_kzalloc(bpmp->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	bpmp->priv = priv;
+	priv->parent = bpmp;
+
+	priv->tx.pool = of_gen_pool_get(bpmp->dev->of_node, "shmem", 0);
+	if (!priv->tx.pool) {
+		dev_err(bpmp->dev, "TX shmem pool not found\n");
+		return -EPROBE_DEFER;
+	}
+
+	priv->tx.virt = gen_pool_dma_alloc(priv->tx.pool, 4096, &priv->tx.phys);
+	if (!priv->tx.virt) {
+		dev_err(bpmp->dev, "failed to allocate from TX pool\n");
+		return -ENOMEM;
+	}
+
+	priv->rx.pool = of_gen_pool_get(bpmp->dev->of_node, "shmem", 1);
+	if (!priv->rx.pool) {
+		dev_err(bpmp->dev, "RX shmem pool not found\n");
+		err = -EPROBE_DEFER;
+		goto free_tx;
+	}
+
+	priv->rx.virt = gen_pool_dma_alloc(priv->rx.pool, 4096, &priv->rx.phys);
+	if (!priv->rx.virt) {
+		dev_err(bpmp->dev, "failed to allocate from RX pool\n");
+		err = -ENOMEM;
+		goto free_tx;
+	}
+
+	err = tegra186_bpmp_channel_init(bpmp->tx_channel, bpmp,
+					 bpmp->soc->channels.cpu_tx.offset);
+	if (err < 0)
+		goto free_rx;
+
+	err = tegra186_bpmp_channel_init(bpmp->rx_channel, bpmp,
+					 bpmp->soc->channels.cpu_rx.offset);
+	if (err < 0)
+		goto cleanup_tx_channel;
+
+	for (i = 0; i < bpmp->threaded.count; i++) {
+		unsigned int index = bpmp->soc->channels.thread.offset + i;
+
+		err = tegra186_bpmp_channel_init(&bpmp->threaded_channels[i],
+						 bpmp, index);
+		if (err < 0)
+			goto cleanup_channels;
+	}
+
+	/* mbox registration */
+	priv->mbox.client.dev = bpmp->dev;
+	priv->mbox.client.rx_callback = mbox_handle_rx;
+	priv->mbox.client.tx_block = false;
+	priv->mbox.client.knows_txdone = false;
+
+	priv->mbox.channel = mbox_request_channel(&priv->mbox.client, 0);
+	if (IS_ERR(priv->mbox.channel)) {
+		err = PTR_ERR(priv->mbox.channel);
+		dev_err(bpmp->dev, "failed to get HSP mailbox: %d\n", err);
+		goto cleanup_channels;
+	}
+
+	tegra186_bpmp_channel_reset(bpmp->tx_channel);
+	tegra186_bpmp_channel_reset(bpmp->rx_channel);
+
+	for (i = 0; i < bpmp->threaded.count; i++)
+		tegra186_bpmp_channel_reset(&bpmp->threaded_channels[i]);
+
+	return 0;
+
+cleanup_channels:
+	for (i = 0; i < bpmp->threaded.count; i++) {
+		if (!bpmp->threaded_channels[i].bpmp)
+			continue;
+
+		tegra186_bpmp_channel_cleanup(&bpmp->threaded_channels[i]);
+	}
+
+	tegra186_bpmp_channel_cleanup(bpmp->rx_channel);
+cleanup_tx_channel:
+	tegra186_bpmp_channel_cleanup(bpmp->tx_channel);
+free_rx:
+	gen_pool_free(priv->rx.pool, (unsigned long)priv->rx.virt, 4096);
+free_tx:
+	gen_pool_free(priv->tx.pool, (unsigned long)priv->tx.virt, 4096);
+
+	return err;
+}
+
+static void tegra186_bpmp_deinit(struct tegra_bpmp *bpmp)
+{
+	struct tegra186_bpmp *priv = bpmp->priv;
+	unsigned int i;
+
+	mbox_free_channel(priv->mbox.channel);
+
+	for (i = 0; i < bpmp->threaded.count; i++)
+		tegra186_bpmp_channel_cleanup(&bpmp->threaded_channels[i]);
+
+	tegra186_bpmp_channel_cleanup(bpmp->rx_channel);
+	tegra186_bpmp_channel_cleanup(bpmp->tx_channel);
+
+	gen_pool_free(priv->rx.pool, (unsigned long)priv->rx.virt, 4096);
+	gen_pool_free(priv->tx.pool, (unsigned long)priv->tx.virt, 4096);
+}
+
+static int tegra186_bpmp_resume(struct tegra_bpmp *bpmp)
+{
+	unsigned int i;
+
+	/* reset message channels */
+	tegra186_bpmp_channel_reset(bpmp->tx_channel);
+	tegra186_bpmp_channel_reset(bpmp->rx_channel);
+
+	for (i = 0; i < bpmp->threaded.count; i++)
+		tegra186_bpmp_channel_reset(&bpmp->threaded_channels[i]);
+
+	return 0;
+}
+
+const struct tegra_bpmp_ops tegra186_bpmp_ops = {
+	.init = tegra186_bpmp_init,
+	.deinit = tegra186_bpmp_deinit,
+	.is_response_ready = tegra186_bpmp_is_message_ready,
+	.is_request_ready = tegra186_bpmp_is_message_ready,
+	.ack_response = tegra186_bpmp_ack_message,
+	.ack_request = tegra186_bpmp_ack_message,
+	.is_response_channel_free = tegra186_bpmp_is_channel_free,
+	.is_request_channel_free = tegra186_bpmp_is_channel_free,
+	.post_response = tegra186_bpmp_post_message,
+	.post_request = tegra186_bpmp_post_message,
+	.ring_doorbell = tegra186_bpmp_ring_doorbell,
+	.resume = tegra186_bpmp_resume,
+};
diff --git a/drivers/firmware/tegra/bpmp-tegra210.c b/drivers/firmware/tegra/bpmp-tegra210.c
new file mode 100644
index 000000000..c32754055
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp-tegra210.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, NVIDIA CORPORATION.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <soc/tegra/bpmp.h>
+
+#include "bpmp-private.h"
+
+#define TRIGGER_OFFSET		0x000
+#define RESULT_OFFSET(id)	(0xc00 + id * 4)
+#define TRIGGER_ID_SHIFT	16
+#define TRIGGER_CMD_GET		4
+
+#define STA_OFFSET		0
+#define SET_OFFSET		4
+#define CLR_OFFSET		8
+
+#define CH_MASK(ch)	(0x3 << ((ch) * 2))
+#define SL_SIGL(ch)	(0x0 << ((ch) * 2))
+#define SL_QUED(ch)	(0x1 << ((ch) * 2))
+#define MA_FREE(ch)	(0x2 << ((ch) * 2))
+#define MA_ACKD(ch)	(0x3 << ((ch) * 2))
+
+struct tegra210_bpmp {
+	void __iomem *atomics;
+	void __iomem *arb_sema;
+	struct irq_data *tx_irq_data;
+};
+
+static u32 bpmp_channel_status(struct tegra_bpmp *bpmp, unsigned int index)
+{
+	struct tegra210_bpmp *priv = bpmp->priv;
+
+	return __raw_readl(priv->arb_sema + STA_OFFSET) & CH_MASK(index);
+}
+
+static bool tegra210_bpmp_is_response_ready(struct tegra_bpmp_channel *channel)
+{
+	unsigned int index = channel->index;
+
+	return bpmp_channel_status(channel->bpmp, index) == MA_ACKD(index);
+}
+
+static bool tegra210_bpmp_is_request_ready(struct tegra_bpmp_channel *channel)
+{
+	unsigned int index = channel->index;
+
+	return bpmp_channel_status(channel->bpmp, index) == SL_SIGL(index);
+}
+
+static bool
+tegra210_bpmp_is_request_channel_free(struct tegra_bpmp_channel *channel)
+{
+	unsigned int index = channel->index;
+
+	return bpmp_channel_status(channel->bpmp, index) == MA_FREE(index);
+}
+
+static bool
+tegra210_bpmp_is_response_channel_free(struct tegra_bpmp_channel *channel)
+{
+	unsigned int index = channel->index;
+
+	return bpmp_channel_status(channel->bpmp, index) == SL_QUED(index);
+}
+
+static int tegra210_bpmp_post_request(struct tegra_bpmp_channel *channel)
+{
+	struct tegra210_bpmp *priv = channel->bpmp->priv;
+
+	__raw_writel(CH_MASK(channel->index), priv->arb_sema + CLR_OFFSET);
+
+	return 0;
+}
+
+static int tegra210_bpmp_post_response(struct tegra_bpmp_channel *channel)
+{
+	struct tegra210_bpmp *priv = channel->bpmp->priv;
+
+	__raw_writel(MA_ACKD(channel->index), priv->arb_sema + SET_OFFSET);
+
+	return 0;
+}
+
+static int tegra210_bpmp_ack_response(struct tegra_bpmp_channel *channel)
+{
+	struct tegra210_bpmp *priv = channel->bpmp->priv;
+
+	__raw_writel(MA_ACKD(channel->index) ^ MA_FREE(channel->index),
+		     priv->arb_sema + CLR_OFFSET);
+
+	return 0;
+}
+
+static int tegra210_bpmp_ack_request(struct tegra_bpmp_channel *channel)
+{
+	struct tegra210_bpmp *priv = channel->bpmp->priv;
+
+	__raw_writel(SL_QUED(channel->index), priv->arb_sema + SET_OFFSET);
+
+	return 0;
+}
+
+static int tegra210_bpmp_ring_doorbell(struct tegra_bpmp *bpmp)
+{
+	struct tegra210_bpmp *priv = bpmp->priv;
+	struct irq_data *irq_data = priv->tx_irq_data;
+
+	/*
+	 * Tegra Legacy Interrupt Controller (LIC) is used to notify BPMP of
+	 * available messages
+	 */
+	if (irq_data->chip->irq_retrigger)
+		return irq_data->chip->irq_retrigger(irq_data);
+
+	return -EINVAL;
+}
+
+static irqreturn_t rx_irq(int irq, void *data)
+{
+	struct tegra_bpmp *bpmp = data;
+
+	tegra_bpmp_handle_rx(bpmp);
+
+	return IRQ_HANDLED;
+}
+
+static int tegra210_bpmp_channel_init(struct tegra_bpmp_channel *channel,
+				      struct tegra_bpmp *bpmp,
+				      unsigned int index)
+{
+	struct tegra210_bpmp *priv = bpmp->priv;
+	u32 address;
+	void *p;
+
+	/* Retrieve channel base address from BPMP */
+	writel(index << TRIGGER_ID_SHIFT | TRIGGER_CMD_GET,
+	       priv->atomics + TRIGGER_OFFSET);
+	address = readl(priv->atomics + RESULT_OFFSET(index));
+
+	p = devm_ioremap(bpmp->dev, address, 0x80);
+	if (!p)
+		return -ENOMEM;
+
+	channel->ib = p;
+	channel->ob = p;
+	channel->index = index;
+	init_completion(&channel->completion);
+	channel->bpmp = bpmp;
+
+	return 0;
+}
+
+static int tegra210_bpmp_init(struct tegra_bpmp *bpmp)
+{
+	struct platform_device *pdev = to_platform_device(bpmp->dev);
+	struct tegra210_bpmp *priv;
+	struct resource *res;
+	unsigned int i;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	bpmp->priv = priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->atomics = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->atomics))
+		return PTR_ERR(priv->atomics);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->arb_sema = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->arb_sema))
+		return PTR_ERR(priv->arb_sema);
+
+	err = tegra210_bpmp_channel_init(bpmp->tx_channel, bpmp,
+					 bpmp->soc->channels.cpu_tx.offset);
+	if (err < 0)
+		return err;
+
+	err = tegra210_bpmp_channel_init(bpmp->rx_channel, bpmp,
+					 bpmp->soc->channels.cpu_rx.offset);
+	if (err < 0)
+		return err;
+
+	for (i = 0; i < bpmp->threaded.count; i++) {
+		unsigned int index = bpmp->soc->channels.thread.offset + i;
+
+		err = tegra210_bpmp_channel_init(&bpmp->threaded_channels[i],
+						 bpmp, index);
+		if (err < 0)
+			return err;
+	}
+
+	err = platform_get_irq_byname(pdev, "tx");
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get TX IRQ: %d\n", err);
+		return err;
+	}
+
+	priv->tx_irq_data = irq_get_irq_data(err);
+	if (!priv->tx_irq_data) {
+		dev_err(&pdev->dev, "failed to get IRQ data for TX IRQ\n");
+		return -ENOENT;
+	}
+
+	err = platform_get_irq_byname(pdev, "rx");
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get rx IRQ: %d\n", err);
+		return err;
+	}
+
+	err = devm_request_irq(&pdev->dev, err, rx_irq,
+			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), bpmp);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+const struct tegra_bpmp_ops tegra210_bpmp_ops = {
+	.init = tegra210_bpmp_init,
+	.is_response_ready = tegra210_bpmp_is_response_ready,
+	.is_request_ready = tegra210_bpmp_is_request_ready,
+	.ack_response = tegra210_bpmp_ack_response,
+	.ack_request = tegra210_bpmp_ack_request,
+	.is_response_channel_free = tegra210_bpmp_is_response_channel_free,
+	.is_request_channel_free = tegra210_bpmp_is_request_channel_free,
+	.post_response = tegra210_bpmp_post_response,
+	.post_request = tegra210_bpmp_post_request,
+	.ring_doorbell = tegra210_bpmp_ring_doorbell,
+};
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
new file mode 100644
index 000000000..5654c5e98
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp.c
@@ -0,0 +1,879 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/clk/tegra.h>
+#include <linux/genalloc.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/semaphore.h>
+#include <linux/sched/clock.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+#include <soc/tegra/ivc.h>
+
+#include "bpmp-private.h"
+
+#define MSG_ACK		BIT(0)
+#define MSG_RING	BIT(1)
+#define TAG_SZ		32
+
+static inline struct tegra_bpmp *
+mbox_client_to_bpmp(struct mbox_client *client)
+{
+	return container_of(client, struct tegra_bpmp, mbox.client);
+}
+
+static inline const struct tegra_bpmp_ops *
+channel_to_ops(struct tegra_bpmp_channel *channel)
+{
+	struct tegra_bpmp *bpmp = channel->bpmp;
+
+	return bpmp->soc->ops;
+}
+
+struct tegra_bpmp *tegra_bpmp_get(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct tegra_bpmp *bpmp;
+	struct device_node *np;
+
+	np = of_parse_phandle(dev->of_node, "nvidia,bpmp", 0);
+	if (!np)
+		return ERR_PTR(-ENOENT);
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		bpmp = ERR_PTR(-ENODEV);
+		goto put;
+	}
+
+	bpmp = platform_get_drvdata(pdev);
+	if (!bpmp) {
+		bpmp = ERR_PTR(-EPROBE_DEFER);
+		put_device(&pdev->dev);
+		goto put;
+	}
+
+put:
+	of_node_put(np);
+	return bpmp;
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_get);
+
+void tegra_bpmp_put(struct tegra_bpmp *bpmp)
+{
+	if (bpmp)
+		put_device(bpmp->dev);
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_put);
+
+static int
+tegra_bpmp_channel_get_thread_index(struct tegra_bpmp_channel *channel)
+{
+	struct tegra_bpmp *bpmp = channel->bpmp;
+	unsigned int count;
+	int index;
+
+	count = bpmp->soc->channels.thread.count;
+
+	index = channel - channel->bpmp->threaded_channels;
+	if (index < 0 || index >= count)
+		return -EINVAL;
+
+	return index;
+}
+
+static bool tegra_bpmp_message_valid(const struct tegra_bpmp_message *msg)
+{
+	return (msg->tx.size <= MSG_DATA_MIN_SZ) &&
+	       (msg->rx.size <= MSG_DATA_MIN_SZ) &&
+	       (msg->tx.size == 0 || msg->tx.data) &&
+	       (msg->rx.size == 0 || msg->rx.data);
+}
+
+static bool tegra_bpmp_is_response_ready(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->is_response_ready(channel);
+}
+
+static bool tegra_bpmp_is_request_ready(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->is_request_ready(channel);
+}
+
+static int tegra_bpmp_wait_response(struct tegra_bpmp_channel *channel)
+{
+	unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout;
+	ktime_t end;
+
+	end = ktime_add_us(ktime_get(), timeout);
+
+	do {
+		if (tegra_bpmp_is_response_ready(channel))
+			return 0;
+	} while (ktime_before(ktime_get(), end));
+
+	return -ETIMEDOUT;
+}
+
+static int tegra_bpmp_ack_response(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->ack_response(channel);
+}
+
+static int tegra_bpmp_ack_request(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->ack_request(channel);
+}
+
+static bool
+tegra_bpmp_is_request_channel_free(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->is_request_channel_free(channel);
+}
+
+static bool
+tegra_bpmp_is_response_channel_free(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->is_response_channel_free(channel);
+}
+
+static int
+tegra_bpmp_wait_request_channel_free(struct tegra_bpmp_channel *channel)
+{
+	unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout;
+	ktime_t start, now;
+
+	start = ns_to_ktime(local_clock());
+
+	do {
+		if (tegra_bpmp_is_request_channel_free(channel))
+			return 0;
+
+		now = ns_to_ktime(local_clock());
+	} while (ktime_us_delta(now, start) < timeout);
+
+	return -ETIMEDOUT;
+}
+
+static int tegra_bpmp_post_request(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->post_request(channel);
+}
+
+static int tegra_bpmp_post_response(struct tegra_bpmp_channel *channel)
+{
+	const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
+
+	return ops->post_response(channel);
+}
+
+static int tegra_bpmp_ring_doorbell(struct tegra_bpmp *bpmp)
+{
+	return bpmp->soc->ops->ring_doorbell(bpmp);
+}
+
+static ssize_t __tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
+					 void *data, size_t size, int *ret)
+{
+	int err;
+
+	if (data && size > 0)
+		memcpy(data, channel->ib->data, size);
+
+	err = tegra_bpmp_ack_response(channel);
+	if (err < 0)
+		return err;
+
+	*ret = channel->ib->code;
+
+	return 0;
+}
+
+static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
+				       void *data, size_t size, int *ret)
+{
+	struct tegra_bpmp *bpmp = channel->bpmp;
+	unsigned long flags;
+	ssize_t err;
+	int index;
+
+	index = tegra_bpmp_channel_get_thread_index(channel);
+	if (index < 0) {
+		err = index;
+		goto unlock;
+	}
+
+	spin_lock_irqsave(&bpmp->lock, flags);
+	err = __tegra_bpmp_channel_read(channel, data, size, ret);
+	clear_bit(index, bpmp->threaded.allocated);
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+
+unlock:
+	up(&bpmp->threaded.lock);
+
+	return err;
+}
+
+static ssize_t __tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
+					  unsigned int mrq, unsigned long flags,
+					  const void *data, size_t size)
+{
+	channel->ob->code = mrq;
+	channel->ob->flags = flags;
+
+	if (data && size > 0)
+		memcpy(channel->ob->data, data, size);
+
+	return tegra_bpmp_post_request(channel);
+}
+
+static struct tegra_bpmp_channel *
+tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
+			  const void *data, size_t size)
+{
+	unsigned long timeout = bpmp->soc->channels.thread.timeout;
+	unsigned int count = bpmp->soc->channels.thread.count;
+	struct tegra_bpmp_channel *channel;
+	unsigned long flags;
+	unsigned int index;
+	int err;
+
+	err = down_timeout(&bpmp->threaded.lock, usecs_to_jiffies(timeout));
+	if (err < 0)
+		return ERR_PTR(err);
+
+	spin_lock_irqsave(&bpmp->lock, flags);
+
+	index = find_first_zero_bit(bpmp->threaded.allocated, count);
+	if (index == count) {
+		err = -EBUSY;
+		goto unlock;
+	}
+
+	channel = &bpmp->threaded_channels[index];
+
+	if (!tegra_bpmp_is_request_channel_free(channel)) {
+		err = -EBUSY;
+		goto unlock;
+	}
+
+	set_bit(index, bpmp->threaded.allocated);
+
+	err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING,
+					 data, size);
+	if (err < 0)
+		goto clear_allocated;
+
+	set_bit(index, bpmp->threaded.busy);
+
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+	return channel;
+
+clear_allocated:
+	clear_bit(index, bpmp->threaded.allocated);
+unlock:
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+	up(&bpmp->threaded.lock);
+
+	return ERR_PTR(err);
+}
+
+static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
+					unsigned int mrq, unsigned long flags,
+					const void *data, size_t size)
+{
+	int err;
+
+	err = tegra_bpmp_wait_request_channel_free(channel);
+	if (err < 0)
+		return err;
+
+	return __tegra_bpmp_channel_write(channel, mrq, flags, data, size);
+}
+
+int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
+			       struct tegra_bpmp_message *msg)
+{
+	struct tegra_bpmp_channel *channel;
+	int err;
+
+	if (WARN_ON(!irqs_disabled()))
+		return -EPERM;
+
+	if (!tegra_bpmp_message_valid(msg))
+		return -EINVAL;
+
+	channel = bpmp->tx_channel;
+
+	spin_lock(&bpmp->atomic_tx_lock);
+
+	err = tegra_bpmp_channel_write(channel, msg->mrq, MSG_ACK,
+				       msg->tx.data, msg->tx.size);
+	if (err < 0) {
+		spin_unlock(&bpmp->atomic_tx_lock);
+		return err;
+	}
+
+	spin_unlock(&bpmp->atomic_tx_lock);
+
+	err = tegra_bpmp_ring_doorbell(bpmp);
+	if (err < 0)
+		return err;
+
+	err = tegra_bpmp_wait_response(channel);
+	if (err < 0)
+		return err;
+
+	return __tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
+					 &msg->rx.ret);
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_transfer_atomic);
+
+int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
+			struct tegra_bpmp_message *msg)
+{
+	struct tegra_bpmp_channel *channel;
+	unsigned long timeout;
+	int err;
+
+	if (WARN_ON(irqs_disabled()))
+		return -EPERM;
+
+	if (!tegra_bpmp_message_valid(msg))
+		return -EINVAL;
+
+	channel = tegra_bpmp_write_threaded(bpmp, msg->mrq, msg->tx.data,
+					    msg->tx.size);
+	if (IS_ERR(channel))
+		return PTR_ERR(channel);
+
+	err = tegra_bpmp_ring_doorbell(bpmp);
+	if (err < 0)
+		return err;
+
+	timeout = usecs_to_jiffies(bpmp->soc->channels.thread.timeout);
+
+	err = wait_for_completion_timeout(&channel->completion, timeout);
+	if (err == 0)
+		return -ETIMEDOUT;
+
+	return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
+				       &msg->rx.ret);
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_transfer);
+
+static struct tegra_bpmp_mrq *tegra_bpmp_find_mrq(struct tegra_bpmp *bpmp,
+						  unsigned int mrq)
+{
+	struct tegra_bpmp_mrq *entry;
+
+	list_for_each_entry(entry, &bpmp->mrqs, list)
+		if (entry->mrq == mrq)
+			return entry;
+
+	return NULL;
+}
+
+void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel, int code,
+			   const void *data, size_t size)
+{
+	unsigned long flags = channel->ib->flags;
+	struct tegra_bpmp *bpmp = channel->bpmp;
+	int err;
+
+	if (WARN_ON(size > MSG_DATA_MIN_SZ))
+		return;
+
+	err = tegra_bpmp_ack_request(channel);
+	if (WARN_ON(err < 0))
+		return;
+
+	if ((flags & MSG_ACK) == 0)
+		return;
+
+	if (WARN_ON(!tegra_bpmp_is_response_channel_free(channel)))
+		return;
+
+	channel->ob->code = code;
+
+	if (data && size > 0)
+		memcpy(channel->ob->data, data, size);
+
+	err = tegra_bpmp_post_response(channel);
+	if (WARN_ON(err < 0))
+		return;
+
+	if (flags & MSG_RING) {
+		err = tegra_bpmp_ring_doorbell(bpmp);
+		if (WARN_ON(err < 0))
+			return;
+	}
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_mrq_return);
+
+static void tegra_bpmp_handle_mrq(struct tegra_bpmp *bpmp,
+				  unsigned int mrq,
+				  struct tegra_bpmp_channel *channel)
+{
+	struct tegra_bpmp_mrq *entry;
+	u32 zero = 0;
+
+	spin_lock(&bpmp->lock);
+
+	entry = tegra_bpmp_find_mrq(bpmp, mrq);
+	if (!entry) {
+		spin_unlock(&bpmp->lock);
+		tegra_bpmp_mrq_return(channel, -EINVAL, &zero, sizeof(zero));
+		return;
+	}
+
+	entry->handler(mrq, channel, entry->data);
+
+	spin_unlock(&bpmp->lock);
+}
+
+int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq,
+			   tegra_bpmp_mrq_handler_t handler, void *data)
+{
+	struct tegra_bpmp_mrq *entry;
+	unsigned long flags;
+
+	if (!handler)
+		return -EINVAL;
+
+	entry = devm_kzalloc(bpmp->dev, sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&bpmp->lock, flags);
+
+	entry->mrq = mrq;
+	entry->handler = handler;
+	entry->data = data;
+	list_add(&entry->list, &bpmp->mrqs);
+
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_request_mrq);
+
+void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, void *data)
+{
+	struct tegra_bpmp_mrq *entry;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bpmp->lock, flags);
+
+	entry = tegra_bpmp_find_mrq(bpmp, mrq);
+	if (!entry)
+		goto unlock;
+
+	list_del(&entry->list);
+	devm_kfree(bpmp->dev, entry);
+
+unlock:
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_free_mrq);
+
+bool tegra_bpmp_mrq_is_supported(struct tegra_bpmp *bpmp, unsigned int mrq)
+{
+	struct mrq_query_abi_request req = { .mrq = cpu_to_le32(mrq) };
+	struct mrq_query_abi_response resp;
+	struct tegra_bpmp_message msg = {
+		.mrq = MRQ_QUERY_ABI,
+		.tx = {
+			.data = &req,
+			.size = sizeof(req),
+		},
+		.rx = {
+			.data = &resp,
+			.size = sizeof(resp),
+		},
+	};
+	int err;
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err || msg.rx.ret)
+		return false;
+
+	return resp.status == 0;
+}
+EXPORT_SYMBOL_GPL(tegra_bpmp_mrq_is_supported);
+
+static void tegra_bpmp_mrq_handle_ping(unsigned int mrq,
+				       struct tegra_bpmp_channel *channel,
+				       void *data)
+{
+	struct mrq_ping_request *request;
+	struct mrq_ping_response response;
+
+	request = (struct mrq_ping_request *)channel->ib->data;
+
+	memset(&response, 0, sizeof(response));
+	response.reply = request->challenge << 1;
+
+	tegra_bpmp_mrq_return(channel, 0, &response, sizeof(response));
+}
+
+static int tegra_bpmp_ping(struct tegra_bpmp *bpmp)
+{
+	struct mrq_ping_response response;
+	struct mrq_ping_request request;
+	struct tegra_bpmp_message msg;
+	unsigned long flags;
+	ktime_t start, end;
+	int err;
+
+	memset(&request, 0, sizeof(request));
+	request.challenge = 1;
+
+	memset(&response, 0, sizeof(response));
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_PING;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+	msg.rx.data = &response;
+	msg.rx.size = sizeof(response);
+
+	local_irq_save(flags);
+	start = ktime_get();
+	err = tegra_bpmp_transfer_atomic(bpmp, &msg);
+	end = ktime_get();
+	local_irq_restore(flags);
+
+	if (!err)
+		dev_dbg(bpmp->dev,
+			"ping ok: challenge: %u, response: %u, time: %lld\n",
+			request.challenge, response.reply,
+			ktime_to_us(ktime_sub(end, start)));
+
+	return err;
+}
+
+/* deprecated version of tag query */
+static int tegra_bpmp_get_firmware_tag_old(struct tegra_bpmp *bpmp, char *tag,
+					   size_t size)
+{
+	struct mrq_query_tag_request request;
+	struct tegra_bpmp_message msg;
+	unsigned long flags;
+	dma_addr_t phys;
+	void *virt;
+	int err;
+
+	if (size != TAG_SZ)
+		return -EINVAL;
+
+	virt = dma_alloc_coherent(bpmp->dev, TAG_SZ, &phys,
+				  GFP_KERNEL | GFP_DMA32);
+	if (!virt)
+		return -ENOMEM;
+
+	memset(&request, 0, sizeof(request));
+	request.addr = phys;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_QUERY_TAG;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+
+	local_irq_save(flags);
+	err = tegra_bpmp_transfer_atomic(bpmp, &msg);
+	local_irq_restore(flags);
+
+	if (err == 0)
+		memcpy(tag, virt, TAG_SZ);
+
+	dma_free_coherent(bpmp->dev, TAG_SZ, virt, phys);
+
+	return err;
+}
+
+static int tegra_bpmp_get_firmware_tag(struct tegra_bpmp *bpmp, char *tag,
+				       size_t size)
+{
+	if (tegra_bpmp_mrq_is_supported(bpmp, MRQ_QUERY_FW_TAG)) {
+		struct mrq_query_fw_tag_response resp;
+		struct tegra_bpmp_message msg = {
+			.mrq = MRQ_QUERY_FW_TAG,
+			.rx = {
+				.data = &resp,
+				.size = sizeof(resp),
+			},
+		};
+		int err;
+
+		if (size != sizeof(resp.tag))
+			return -EINVAL;
+
+		err = tegra_bpmp_transfer(bpmp, &msg);
+
+		if (err)
+			return err;
+		if (msg.rx.ret < 0)
+			return -EINVAL;
+
+		memcpy(tag, resp.tag, sizeof(resp.tag));
+		return 0;
+	}
+
+	return tegra_bpmp_get_firmware_tag_old(bpmp, tag, size);
+}
+
+static void tegra_bpmp_channel_signal(struct tegra_bpmp_channel *channel)
+{
+	unsigned long flags = channel->ob->flags;
+
+	if ((flags & MSG_RING) == 0)
+		return;
+
+	complete(&channel->completion);
+}
+
+void tegra_bpmp_handle_rx(struct tegra_bpmp *bpmp)
+{
+	struct tegra_bpmp_channel *channel;
+	unsigned int i, count;
+	unsigned long *busy;
+
+	channel = bpmp->rx_channel;
+	count = bpmp->soc->channels.thread.count;
+	busy = bpmp->threaded.busy;
+
+	if (tegra_bpmp_is_request_ready(channel))
+		tegra_bpmp_handle_mrq(bpmp, channel->ib->code, channel);
+
+	spin_lock(&bpmp->lock);
+
+	for_each_set_bit(i, busy, count) {
+		struct tegra_bpmp_channel *channel;
+
+		channel = &bpmp->threaded_channels[i];
+
+		if (tegra_bpmp_is_response_ready(channel)) {
+			tegra_bpmp_channel_signal(channel);
+			clear_bit(i, busy);
+		}
+	}
+
+	spin_unlock(&bpmp->lock);
+}
+
+static int tegra_bpmp_probe(struct platform_device *pdev)
+{
+	struct tegra_bpmp *bpmp;
+	char tag[TAG_SZ];
+	size_t size;
+	int err;
+
+	bpmp = devm_kzalloc(&pdev->dev, sizeof(*bpmp), GFP_KERNEL);
+	if (!bpmp)
+		return -ENOMEM;
+
+	bpmp->soc = of_device_get_match_data(&pdev->dev);
+	bpmp->dev = &pdev->dev;
+
+	INIT_LIST_HEAD(&bpmp->mrqs);
+	spin_lock_init(&bpmp->lock);
+
+	bpmp->threaded.count = bpmp->soc->channels.thread.count;
+	sema_init(&bpmp->threaded.lock, bpmp->threaded.count);
+
+	size = BITS_TO_LONGS(bpmp->threaded.count) * sizeof(long);
+
+	bpmp->threaded.allocated = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!bpmp->threaded.allocated)
+		return -ENOMEM;
+
+	bpmp->threaded.busy = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+	if (!bpmp->threaded.busy)
+		return -ENOMEM;
+
+	spin_lock_init(&bpmp->atomic_tx_lock);
+	bpmp->tx_channel = devm_kzalloc(&pdev->dev, sizeof(*bpmp->tx_channel),
+					GFP_KERNEL);
+	if (!bpmp->tx_channel)
+		return -ENOMEM;
+
+	bpmp->rx_channel = devm_kzalloc(&pdev->dev, sizeof(*bpmp->rx_channel),
+	                                GFP_KERNEL);
+	if (!bpmp->rx_channel)
+		return -ENOMEM;
+
+	bpmp->threaded_channels = devm_kcalloc(&pdev->dev, bpmp->threaded.count,
+					       sizeof(*bpmp->threaded_channels),
+					       GFP_KERNEL);
+	if (!bpmp->threaded_channels)
+		return -ENOMEM;
+
+	err = bpmp->soc->ops->init(bpmp);
+	if (err < 0)
+		return err;
+
+	err = tegra_bpmp_request_mrq(bpmp, MRQ_PING,
+				     tegra_bpmp_mrq_handle_ping, bpmp);
+	if (err < 0)
+		goto deinit;
+
+	err = tegra_bpmp_ping(bpmp);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to ping BPMP: %d\n", err);
+		goto free_mrq;
+	}
+
+	err = tegra_bpmp_get_firmware_tag(bpmp, tag, sizeof(tag));
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to get firmware tag: %d\n", err);
+		goto free_mrq;
+	}
+
+	dev_info(&pdev->dev, "firmware: %.*s\n", (int)sizeof(tag), tag);
+
+	platform_set_drvdata(pdev, bpmp);
+
+	err = of_platform_default_populate(pdev->dev.of_node, NULL, &pdev->dev);
+	if (err < 0)
+		goto free_mrq;
+
+	if (of_find_property(pdev->dev.of_node, "#clock-cells", NULL)) {
+		err = tegra_bpmp_init_clocks(bpmp);
+		if (err < 0)
+			goto free_mrq;
+	}
+
+	if (of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
+		err = tegra_bpmp_init_resets(bpmp);
+		if (err < 0)
+			goto free_mrq;
+	}
+
+	if (of_find_property(pdev->dev.of_node, "#power-domain-cells", NULL)) {
+		err = tegra_bpmp_init_powergates(bpmp);
+		if (err < 0)
+			goto free_mrq;
+	}
+
+	err = tegra_bpmp_init_debugfs(bpmp);
+	if (err < 0)
+		dev_err(&pdev->dev, "debugfs initialization failed: %d\n", err);
+
+	return 0;
+
+free_mrq:
+	tegra_bpmp_free_mrq(bpmp, MRQ_PING, bpmp);
+deinit:
+	if (bpmp->soc->ops->deinit)
+		bpmp->soc->ops->deinit(bpmp);
+
+	return err;
+}
+
+static int __maybe_unused tegra_bpmp_resume(struct device *dev)
+{
+	struct tegra_bpmp *bpmp = dev_get_drvdata(dev);
+
+	if (bpmp->soc->ops->resume)
+		return bpmp->soc->ops->resume(bpmp);
+	else
+		return 0;
+}
+
+static const struct dev_pm_ops tegra_bpmp_pm_ops = {
+	.resume_noirq = tegra_bpmp_resume,
+};
+
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
+static const struct tegra_bpmp_soc tegra186_soc = {
+	.channels = {
+		.cpu_tx = {
+			.offset = 3,
+			.timeout = 60 * USEC_PER_SEC,
+		},
+		.thread = {
+			.offset = 0,
+			.count = 3,
+			.timeout = 600 * USEC_PER_SEC,
+		},
+		.cpu_rx = {
+			.offset = 13,
+			.timeout = 0,
+		},
+	},
+	.ops = &tegra186_bpmp_ops,
+	.num_resets = 193,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
+static const struct tegra_bpmp_soc tegra210_soc = {
+	.channels = {
+		.cpu_tx = {
+			.offset = 0,
+			.count = 1,
+			.timeout = 60 * USEC_PER_SEC,
+		},
+		.thread = {
+			.offset = 4,
+			.count = 1,
+			.timeout = 600 * USEC_PER_SEC,
+		},
+		.cpu_rx = {
+			.offset = 8,
+			.count = 1,
+			.timeout = 0,
+		},
+	},
+	.ops = &tegra210_bpmp_ops,
+};
+#endif
+
+static const struct of_device_id tegra_bpmp_match[] = {
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
+    IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC)
+	{ .compatible = "nvidia,tegra186-bpmp", .data = &tegra186_soc },
+#endif
+#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
+	{ .compatible = "nvidia,tegra210-bpmp", .data = &tegra210_soc },
+#endif
+	{ }
+};
+
+static struct platform_driver tegra_bpmp_driver = {
+	.driver = {
+		.name = "tegra-bpmp",
+		.of_match_table = tegra_bpmp_match,
+		.pm = &tegra_bpmp_pm_ops,
+		.suppress_bind_attrs = true,
+	},
+	.probe = tegra_bpmp_probe,
+};
+builtin_platform_driver(tegra_bpmp_driver);
diff --git a/drivers/firmware/tegra/ivc.c b/drivers/firmware/tegra/ivc.c
new file mode 100644
index 000000000..e2398cd7c
--- /dev/null
+++ b/drivers/firmware/tegra/ivc.c
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <soc/tegra/ivc.h>
+
+#define TEGRA_IVC_ALIGN 64
+
+/*
+ * IVC channel reset protocol.
+ *
+ * Each end uses its tx_channel.state to indicate its synchronization state.
+ */
+enum tegra_ivc_state {
+	/*
+	 * This value is zero for backwards compatibility with services that
+	 * assume channels to be initially zeroed. Such channels are in an
+	 * initially valid state, but cannot be asynchronously reset, and must
+	 * maintain a valid state at all times.
+	 *
+	 * The transmitting end can enter the established state from the sync or
+	 * ack state when it observes the receiving endpoint in the ack or
+	 * established state, indicating that has cleared the counters in our
+	 * rx_channel.
+	 */
+	TEGRA_IVC_STATE_ESTABLISHED = 0,
+
+	/*
+	 * If an endpoint is observed in the sync state, the remote endpoint is
+	 * allowed to clear the counters it owns asynchronously with respect to
+	 * the current endpoint. Therefore, the current endpoint is no longer
+	 * allowed to communicate.
+	 */
+	TEGRA_IVC_STATE_SYNC,
+
+	/*
+	 * When the transmitting end observes the receiving end in the sync
+	 * state, it can clear the w_count and r_count and transition to the ack
+	 * state. If the remote endpoint observes us in the ack state, it can
+	 * return to the established state once it has cleared its counters.
+	 */
+	TEGRA_IVC_STATE_ACK
+};
+
+/*
+ * This structure is divided into two-cache aligned parts, the first is only
+ * written through the tx.channel pointer, while the second is only written
+ * through the rx.channel pointer. This delineates ownership of the cache
+ * lines, which is critical to performance and necessary in non-cache coherent
+ * implementations.
+ */
+struct tegra_ivc_header {
+	union {
+		struct {
+			/* fields owned by the transmitting end */
+			u32 count;
+			u32 state;
+		};
+
+		u8 pad[TEGRA_IVC_ALIGN];
+	} tx;
+
+	union {
+		/* fields owned by the receiving end */
+		u32 count;
+		u8 pad[TEGRA_IVC_ALIGN];
+	} rx;
+};
+
+static inline void tegra_ivc_invalidate(struct tegra_ivc *ivc, dma_addr_t phys)
+{
+	if (!ivc->peer)
+		return;
+
+	dma_sync_single_for_cpu(ivc->peer, phys, TEGRA_IVC_ALIGN,
+				DMA_FROM_DEVICE);
+}
+
+static inline void tegra_ivc_flush(struct tegra_ivc *ivc, dma_addr_t phys)
+{
+	if (!ivc->peer)
+		return;
+
+	dma_sync_single_for_device(ivc->peer, phys, TEGRA_IVC_ALIGN,
+				   DMA_TO_DEVICE);
+}
+
+static inline bool tegra_ivc_empty(struct tegra_ivc *ivc,
+				   struct tegra_ivc_header *header)
+{
+	/*
+	 * This function performs multiple checks on the same values with
+	 * security implications, so create snapshots with READ_ONCE() to
+	 * ensure that these checks use the same values.
+	 */
+	u32 tx = READ_ONCE(header->tx.count);
+	u32 rx = READ_ONCE(header->rx.count);
+
+	/*
+	 * Perform an over-full check to prevent denial of service attacks
+	 * where a server could be easily fooled into believing that there's
+	 * an extremely large number of frames ready, since receivers are not
+	 * expected to check for full or over-full conditions.
+	 *
+	 * Although the channel isn't empty, this is an invalid case caused by
+	 * a potentially malicious peer, so returning empty is safer, because
+	 * it gives the impression that the channel has gone silent.
+	 */
+	if (tx - rx > ivc->num_frames)
+		return true;
+
+	return tx == rx;
+}
+
+static inline bool tegra_ivc_full(struct tegra_ivc *ivc,
+				  struct tegra_ivc_header *header)
+{
+	u32 tx = READ_ONCE(header->tx.count);
+	u32 rx = READ_ONCE(header->rx.count);
+
+	/*
+	 * Invalid cases where the counters indicate that the queue is over
+	 * capacity also appear full.
+	 */
+	return tx - rx >= ivc->num_frames;
+}
+
+static inline u32 tegra_ivc_available(struct tegra_ivc *ivc,
+				      struct tegra_ivc_header *header)
+{
+	u32 tx = READ_ONCE(header->tx.count);
+	u32 rx = READ_ONCE(header->rx.count);
+
+	/*
+	 * This function isn't expected to be used in scenarios where an
+	 * over-full situation can lead to denial of service attacks. See the
+	 * comment in tegra_ivc_empty() for an explanation about special
+	 * over-full considerations.
+	 */
+	return tx - rx;
+}
+
+static inline void tegra_ivc_advance_tx(struct tegra_ivc *ivc)
+{
+	WRITE_ONCE(ivc->tx.channel->tx.count,
+		   READ_ONCE(ivc->tx.channel->tx.count) + 1);
+
+	if (ivc->tx.position == ivc->num_frames - 1)
+		ivc->tx.position = 0;
+	else
+		ivc->tx.position++;
+}
+
+static inline void tegra_ivc_advance_rx(struct tegra_ivc *ivc)
+{
+	WRITE_ONCE(ivc->rx.channel->rx.count,
+		   READ_ONCE(ivc->rx.channel->rx.count) + 1);
+
+	if (ivc->rx.position == ivc->num_frames - 1)
+		ivc->rx.position = 0;
+	else
+		ivc->rx.position++;
+}
+
+static inline int tegra_ivc_check_read(struct tegra_ivc *ivc)
+{
+	unsigned int offset = offsetof(struct tegra_ivc_header, tx.count);
+
+	/*
+	 * tx.channel->state is set locally, so it is not synchronized with
+	 * state from the remote peer. The remote peer cannot reset its
+	 * transmit counters until we've acknowledged its synchronization
+	 * request, so no additional synchronization is required because an
+	 * asynchronous transition of rx.channel->state to
+	 * TEGRA_IVC_STATE_ACK is not allowed.
+	 */
+	if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED)
+		return -ECONNRESET;
+
+	/*
+	 * Avoid unnecessary invalidations when performing repeated accesses
+	 * to an IVC channel by checking the old queue pointers first.
+	 *
+	 * Synchronization is only necessary when these pointers indicate
+	 * empty or full.
+	 */
+	if (!tegra_ivc_empty(ivc, ivc->rx.channel))
+		return 0;
+
+	tegra_ivc_invalidate(ivc, ivc->rx.phys + offset);
+
+	if (tegra_ivc_empty(ivc, ivc->rx.channel))
+		return -ENOSPC;
+
+	return 0;
+}
+
+static inline int tegra_ivc_check_write(struct tegra_ivc *ivc)
+{
+	unsigned int offset = offsetof(struct tegra_ivc_header, rx.count);
+
+	if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED)
+		return -ECONNRESET;
+
+	if (!tegra_ivc_full(ivc, ivc->tx.channel))
+		return 0;
+
+	tegra_ivc_invalidate(ivc, ivc->tx.phys + offset);
+
+	if (tegra_ivc_full(ivc, ivc->tx.channel))
+		return -ENOSPC;
+
+	return 0;
+}
+
+static void *tegra_ivc_frame_virt(struct tegra_ivc *ivc,
+				  struct tegra_ivc_header *header,
+				  unsigned int frame)
+{
+	if (WARN_ON(frame >= ivc->num_frames))
+		return ERR_PTR(-EINVAL);
+
+	return (void *)(header + 1) + ivc->frame_size * frame;
+}
+
+static inline dma_addr_t tegra_ivc_frame_phys(struct tegra_ivc *ivc,
+					      dma_addr_t phys,
+					      unsigned int frame)
+{
+	unsigned long offset;
+
+	offset = sizeof(struct tegra_ivc_header) + ivc->frame_size * frame;
+
+	return phys + offset;
+}
+
+static inline void tegra_ivc_invalidate_frame(struct tegra_ivc *ivc,
+					      dma_addr_t phys,
+					      unsigned int frame,
+					      unsigned int offset,
+					      size_t size)
+{
+	if (!ivc->peer || WARN_ON(frame >= ivc->num_frames))
+		return;
+
+	phys = tegra_ivc_frame_phys(ivc, phys, frame) + offset;
+
+	dma_sync_single_for_cpu(ivc->peer, phys, size, DMA_FROM_DEVICE);
+}
+
+static inline void tegra_ivc_flush_frame(struct tegra_ivc *ivc,
+					 dma_addr_t phys,
+					 unsigned int frame,
+					 unsigned int offset,
+					 size_t size)
+{
+	if (!ivc->peer || WARN_ON(frame >= ivc->num_frames))
+		return;
+
+	phys = tegra_ivc_frame_phys(ivc, phys, frame) + offset;
+
+	dma_sync_single_for_device(ivc->peer, phys, size, DMA_TO_DEVICE);
+}
+
+/* directly peek at the next frame rx'ed */
+void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc)
+{
+	int err;
+
+	if (WARN_ON(ivc == NULL))
+		return ERR_PTR(-EINVAL);
+
+	err = tegra_ivc_check_read(ivc);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	/*
+	 * Order observation of ivc->rx.position potentially indicating new
+	 * data before data read.
+	 */
+	smp_rmb();
+
+	tegra_ivc_invalidate_frame(ivc, ivc->rx.phys, ivc->rx.position, 0,
+				   ivc->frame_size);
+
+	return tegra_ivc_frame_virt(ivc, ivc->rx.channel, ivc->rx.position);
+}
+EXPORT_SYMBOL(tegra_ivc_read_get_next_frame);
+
+int tegra_ivc_read_advance(struct tegra_ivc *ivc)
+{
+	unsigned int rx = offsetof(struct tegra_ivc_header, rx.count);
+	unsigned int tx = offsetof(struct tegra_ivc_header, tx.count);
+	int err;
+
+	/*
+	 * No read barriers or synchronization here: the caller is expected to
+	 * have already observed the channel non-empty. This check is just to
+	 * catch programming errors.
+	 */
+	err = tegra_ivc_check_read(ivc);
+	if (err < 0)
+		return err;
+
+	tegra_ivc_advance_rx(ivc);
+
+	tegra_ivc_flush(ivc, ivc->rx.phys + rx);
+
+	/*
+	 * Ensure our write to ivc->rx.position occurs before our read from
+	 * ivc->tx.position.
+	 */
+	smp_mb();
+
+	/*
+	 * Notify only upon transition from full to non-full. The available
+	 * count can only asynchronously increase, so the worst possible
+	 * side-effect will be a spurious notification.
+	 */
+	tegra_ivc_invalidate(ivc, ivc->rx.phys + tx);
+
+	if (tegra_ivc_available(ivc, ivc->rx.channel) == ivc->num_frames - 1)
+		ivc->notify(ivc, ivc->notify_data);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_read_advance);
+
+/* directly poke at the next frame to be tx'ed */
+void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc)
+{
+	int err;
+
+	err = tegra_ivc_check_write(ivc);
+	if (err < 0)
+		return ERR_PTR(err);
+
+	return tegra_ivc_frame_virt(ivc, ivc->tx.channel, ivc->tx.position);
+}
+EXPORT_SYMBOL(tegra_ivc_write_get_next_frame);
+
+/* advance the tx buffer */
+int tegra_ivc_write_advance(struct tegra_ivc *ivc)
+{
+	unsigned int tx = offsetof(struct tegra_ivc_header, tx.count);
+	unsigned int rx = offsetof(struct tegra_ivc_header, rx.count);
+	int err;
+
+	err = tegra_ivc_check_write(ivc);
+	if (err < 0)
+		return err;
+
+	tegra_ivc_flush_frame(ivc, ivc->tx.phys, ivc->tx.position, 0,
+			      ivc->frame_size);
+
+	/*
+	 * Order any possible stores to the frame before update of
+	 * ivc->tx.position.
+	 */
+	smp_wmb();
+
+	tegra_ivc_advance_tx(ivc);
+	tegra_ivc_flush(ivc, ivc->tx.phys + tx);
+
+	/*
+	 * Ensure our write to ivc->tx.position occurs before our read from
+	 * ivc->rx.position.
+	 */
+	smp_mb();
+
+	/*
+	 * Notify only upon transition from empty to non-empty. The available
+	 * count can only asynchronously decrease, so the worst possible
+	 * side-effect will be a spurious notification.
+	 */
+	tegra_ivc_invalidate(ivc, ivc->tx.phys + rx);
+
+	if (tegra_ivc_available(ivc, ivc->tx.channel) == 1)
+		ivc->notify(ivc, ivc->notify_data);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_write_advance);
+
+void tegra_ivc_reset(struct tegra_ivc *ivc)
+{
+	unsigned int offset = offsetof(struct tegra_ivc_header, tx.count);
+
+	ivc->tx.channel->tx.state = TEGRA_IVC_STATE_SYNC;
+	tegra_ivc_flush(ivc, ivc->tx.phys + offset);
+	ivc->notify(ivc, ivc->notify_data);
+}
+EXPORT_SYMBOL(tegra_ivc_reset);
+
+/*
+ * =======================================================
+ *  IVC State Transition Table - see tegra_ivc_notified()
+ * =======================================================
+ *
+ *	local	remote	action
+ *	-----	------	-----------------------------------
+ *	SYNC	EST	<none>
+ *	SYNC	ACK	reset counters; move to EST; notify
+ *	SYNC	SYNC	reset counters; move to ACK; notify
+ *	ACK	EST	move to EST; notify
+ *	ACK	ACK	move to EST; notify
+ *	ACK	SYNC	reset counters; move to ACK; notify
+ *	EST	EST	<none>
+ *	EST	ACK	<none>
+ *	EST	SYNC	reset counters; move to ACK; notify
+ *
+ * ===============================================================
+ */
+
+int tegra_ivc_notified(struct tegra_ivc *ivc)
+{
+	unsigned int offset = offsetof(struct tegra_ivc_header, tx.count);
+	enum tegra_ivc_state state;
+
+	/* Copy the receiver's state out of shared memory. */
+	tegra_ivc_invalidate(ivc, ivc->rx.phys + offset);
+	state = READ_ONCE(ivc->rx.channel->tx.state);
+
+	if (state == TEGRA_IVC_STATE_SYNC) {
+		offset = offsetof(struct tegra_ivc_header, tx.count);
+
+		/*
+		 * Order observation of TEGRA_IVC_STATE_SYNC before stores
+		 * clearing tx.channel.
+		 */
+		smp_rmb();
+
+		/*
+		 * Reset tx.channel counters. The remote end is in the SYNC
+		 * state and won't make progress until we change our state,
+		 * so the counters are not in use at this time.
+		 */
+		ivc->tx.channel->tx.count = 0;
+		ivc->rx.channel->rx.count = 0;
+
+		ivc->tx.position = 0;
+		ivc->rx.position = 0;
+
+		/*
+		 * Ensure that counters appear cleared before new state can be
+		 * observed.
+		 */
+		smp_wmb();
+
+		/*
+		 * Move to ACK state. We have just cleared our counters, so it
+		 * is now safe for the remote end to start using these values.
+		 */
+		ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ACK;
+		tegra_ivc_flush(ivc, ivc->tx.phys + offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc, ivc->notify_data);
+
+	} else if (ivc->tx.channel->tx.state == TEGRA_IVC_STATE_SYNC &&
+		   state == TEGRA_IVC_STATE_ACK) {
+		offset = offsetof(struct tegra_ivc_header, tx.count);
+
+		/*
+		 * Order observation of ivc_state_sync before stores clearing
+		 * tx_channel.
+		 */
+		smp_rmb();
+
+		/*
+		 * Reset tx.channel counters. The remote end is in the ACK
+		 * state and won't make progress until we change our state,
+		 * so the counters are not in use at this time.
+		 */
+		ivc->tx.channel->tx.count = 0;
+		ivc->rx.channel->rx.count = 0;
+
+		ivc->tx.position = 0;
+		ivc->rx.position = 0;
+
+		/*
+		 * Ensure that counters appear cleared before new state can be
+		 * observed.
+		 */
+		smp_wmb();
+
+		/*
+		 * Move to ESTABLISHED state. We know that the remote end has
+		 * already cleared its counters, so it is safe to start
+		 * writing/reading on this channel.
+		 */
+		ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ESTABLISHED;
+		tegra_ivc_flush(ivc, ivc->tx.phys + offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc, ivc->notify_data);
+
+	} else if (ivc->tx.channel->tx.state == TEGRA_IVC_STATE_ACK) {
+		offset = offsetof(struct tegra_ivc_header, tx.count);
+
+		/*
+		 * At this point, we have observed the peer to be in either
+		 * the ACK or ESTABLISHED state. Next, order observation of
+		 * peer state before storing to tx.channel.
+		 */
+		smp_rmb();
+
+		/*
+		 * Move to ESTABLISHED state. We know that we have previously
+		 * cleared our counters, and we know that the remote end has
+		 * cleared its counters, so it is safe to start writing/reading
+		 * on this channel.
+		 */
+		ivc->tx.channel->tx.state = TEGRA_IVC_STATE_ESTABLISHED;
+		tegra_ivc_flush(ivc, ivc->tx.phys + offset);
+
+		/*
+		 * Notify remote end to observe state transition.
+		 */
+		ivc->notify(ivc, ivc->notify_data);
+
+	} else {
+		/*
+		 * There is no need to handle any further action. Either the
+		 * channel is already fully established, or we are waiting for
+		 * the remote end to catch up with our current state. Refer
+		 * to the diagram in "IVC State Transition Table" above.
+		 */
+	}
+
+	if (ivc->tx.channel->tx.state != TEGRA_IVC_STATE_ESTABLISHED)
+		return -EAGAIN;
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_notified);
+
+size_t tegra_ivc_align(size_t size)
+{
+	return ALIGN(size, TEGRA_IVC_ALIGN);
+}
+EXPORT_SYMBOL(tegra_ivc_align);
+
+unsigned tegra_ivc_total_queue_size(unsigned queue_size)
+{
+	if (!IS_ALIGNED(queue_size, TEGRA_IVC_ALIGN)) {
+		pr_err("%s: queue_size (%u) must be %u-byte aligned\n",
+		       __func__, queue_size, TEGRA_IVC_ALIGN);
+		return 0;
+	}
+
+	return queue_size + sizeof(struct tegra_ivc_header);
+}
+EXPORT_SYMBOL(tegra_ivc_total_queue_size);
+
+static int tegra_ivc_check_params(unsigned long rx, unsigned long tx,
+				  unsigned int num_frames, size_t frame_size)
+{
+	BUILD_BUG_ON(!IS_ALIGNED(offsetof(struct tegra_ivc_header, tx.count),
+				 TEGRA_IVC_ALIGN));
+	BUILD_BUG_ON(!IS_ALIGNED(offsetof(struct tegra_ivc_header, rx.count),
+				 TEGRA_IVC_ALIGN));
+	BUILD_BUG_ON(!IS_ALIGNED(sizeof(struct tegra_ivc_header),
+				 TEGRA_IVC_ALIGN));
+
+	if ((uint64_t)num_frames * (uint64_t)frame_size >= 0x100000000UL) {
+		pr_err("num_frames * frame_size overflows\n");
+		return -EINVAL;
+	}
+
+	if (!IS_ALIGNED(frame_size, TEGRA_IVC_ALIGN)) {
+		pr_err("frame size not adequately aligned: %zu\n", frame_size);
+		return -EINVAL;
+	}
+
+	/*
+	 * The headers must at least be aligned enough for counters
+	 * to be accessed atomically.
+	 */
+	if (!IS_ALIGNED(rx, TEGRA_IVC_ALIGN)) {
+		pr_err("IVC channel start not aligned: %#lx\n", rx);
+		return -EINVAL;
+	}
+
+	if (!IS_ALIGNED(tx, TEGRA_IVC_ALIGN)) {
+		pr_err("IVC channel start not aligned: %#lx\n", tx);
+		return -EINVAL;
+	}
+
+	if (rx < tx) {
+		if (rx + frame_size * num_frames > tx) {
+			pr_err("queue regions overlap: %#lx + %zx > %#lx\n",
+			       rx, frame_size * num_frames, tx);
+			return -EINVAL;
+		}
+	} else {
+		if (tx + frame_size * num_frames > rx) {
+			pr_err("queue regions overlap: %#lx + %zx > %#lx\n",
+			       tx, frame_size * num_frames, rx);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx,
+		   dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys,
+		   unsigned int num_frames, size_t frame_size,
+		   void (*notify)(struct tegra_ivc *ivc, void *data),
+		   void *data)
+{
+	size_t queue_size;
+	int err;
+
+	if (WARN_ON(!ivc || !notify))
+		return -EINVAL;
+
+	/*
+	 * All sizes that can be returned by communication functions should
+	 * fit in an int.
+	 */
+	if (frame_size > INT_MAX)
+		return -E2BIG;
+
+	err = tegra_ivc_check_params((unsigned long)rx, (unsigned long)tx,
+				     num_frames, frame_size);
+	if (err < 0)
+		return err;
+
+	queue_size = tegra_ivc_total_queue_size(num_frames * frame_size);
+
+	if (peer) {
+		ivc->rx.phys = dma_map_single(peer, rx, queue_size,
+					      DMA_BIDIRECTIONAL);
+		if (dma_mapping_error(peer, ivc->rx.phys))
+			return -ENOMEM;
+
+		ivc->tx.phys = dma_map_single(peer, tx, queue_size,
+					      DMA_BIDIRECTIONAL);
+		if (dma_mapping_error(peer, ivc->tx.phys)) {
+			dma_unmap_single(peer, ivc->rx.phys, queue_size,
+					 DMA_BIDIRECTIONAL);
+			return -ENOMEM;
+		}
+	} else {
+		ivc->rx.phys = rx_phys;
+		ivc->tx.phys = tx_phys;
+	}
+
+	ivc->rx.channel = rx;
+	ivc->tx.channel = tx;
+	ivc->peer = peer;
+	ivc->notify = notify;
+	ivc->notify_data = data;
+	ivc->frame_size = frame_size;
+	ivc->num_frames = num_frames;
+
+	/*
+	 * These values aren't necessarily correct until the channel has been
+	 * reset.
+	 */
+	ivc->tx.position = 0;
+	ivc->rx.position = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_init);
+
+void tegra_ivc_cleanup(struct tegra_ivc *ivc)
+{
+	if (ivc->peer) {
+		size_t size = tegra_ivc_total_queue_size(ivc->num_frames *
+							 ivc->frame_size);
+
+		dma_unmap_single(ivc->peer, ivc->rx.phys, size,
+				 DMA_BIDIRECTIONAL);
+		dma_unmap_single(ivc->peer, ivc->tx.phys, size,
+				 DMA_BIDIRECTIONAL);
+	}
+}
+EXPORT_SYMBOL(tegra_ivc_cleanup);
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
new file mode 100644
index 000000000..b0576cec2
--- /dev/null
+++ b/drivers/firmware/ti_sci.c
@@ -0,0 +1,3513 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments System Control Interface Protocol Driver
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ *	Nishanth Menon
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/bitmap.h>
+#include <linux/debugfs.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/semaphore.h>
+#include <linux/slab.h>
+#include <linux/soc/ti/ti-msgmgr.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <linux/reboot.h>
+
+#include "ti_sci.h"
+
+/* List of all TI SCI devices active in system */
+static LIST_HEAD(ti_sci_list);
+/* Protection for the entire list */
+static DEFINE_MUTEX(ti_sci_list_mutex);
+
+/**
+ * struct ti_sci_xfer - Structure representing a message flow
+ * @tx_message:	Transmit message
+ * @rx_len:	Receive message length
+ * @xfer_buf:	Preallocated buffer to store receive message
+ *		Since we work with request-ACK protocol, we can
+ *		reuse the same buffer for the rx path as we
+ *		use for the tx path.
+ * @done:	completion event
+ */
+struct ti_sci_xfer {
+	struct ti_msgmgr_message tx_message;
+	u8 rx_len;
+	u8 *xfer_buf;
+	struct completion done;
+};
+
+/**
+ * struct ti_sci_xfers_info - Structure to manage transfer information
+ * @sem_xfer_count:	Counting Semaphore for managing max simultaneous
+ *			Messages.
+ * @xfer_block:		Preallocated Message array
+ * @xfer_alloc_table:	Bitmap table for allocated messages.
+ *			Index of this bitmap table is also used for message
+ *			sequence identifier.
+ * @xfer_lock:		Protection for message allocation
+ */
+struct ti_sci_xfers_info {
+	struct semaphore sem_xfer_count;
+	struct ti_sci_xfer *xfer_block;
+	unsigned long *xfer_alloc_table;
+	/* protect transfer allocation */
+	spinlock_t xfer_lock;
+};
+
+/**
+ * struct ti_sci_desc - Description of SoC integration
+ * @default_host_id:	Host identifier representing the compute entity
+ * @max_rx_timeout_ms:	Timeout for communication with SoC (in Milliseconds)
+ * @max_msgs: Maximum number of messages that can be pending
+ *		  simultaneously in the system
+ * @max_msg_size: Maximum size of data per message that can be handled.
+ */
+struct ti_sci_desc {
+	u8 default_host_id;
+	int max_rx_timeout_ms;
+	int max_msgs;
+	int max_msg_size;
+};
+
+/**
+ * struct ti_sci_info - Structure representing a TI SCI instance
+ * @dev:	Device pointer
+ * @desc:	SoC description for this instance
+ * @nb:	Reboot Notifier block
+ * @d:		Debugfs file entry
+ * @debug_region: Memory region where the debug message are available
+ * @debug_region_size: Debug region size
+ * @debug_buffer: Buffer allocated to copy debug messages.
+ * @handle:	Instance of TI SCI handle to send to clients.
+ * @cl:		Mailbox Client
+ * @chan_tx:	Transmit mailbox channel
+ * @chan_rx:	Receive mailbox channel
+ * @minfo:	Message info
+ * @node:	list head
+ * @host_id:	Host ID
+ * @users:	Number of users of this instance
+ */
+struct ti_sci_info {
+	struct device *dev;
+	struct notifier_block nb;
+	const struct ti_sci_desc *desc;
+	struct dentry *d;
+	void __iomem *debug_region;
+	char *debug_buffer;
+	size_t debug_region_size;
+	struct ti_sci_handle handle;
+	struct mbox_client cl;
+	struct mbox_chan *chan_tx;
+	struct mbox_chan *chan_rx;
+	struct ti_sci_xfers_info minfo;
+	struct list_head node;
+	u8 host_id;
+	/* protected by ti_sci_list_mutex */
+	int users;
+
+};
+
+#define cl_to_ti_sci_info(c)	container_of(c, struct ti_sci_info, cl)
+#define handle_to_ti_sci_info(h) container_of(h, struct ti_sci_info, handle)
+#define reboot_to_ti_sci_info(n) container_of(n, struct ti_sci_info, nb)
+
+#ifdef CONFIG_DEBUG_FS
+
+/**
+ * ti_sci_debug_show() - Helper to dump the debug log
+ * @s:	sequence file pointer
+ * @unused:	unused.
+ *
+ * Return: 0
+ */
+static int ti_sci_debug_show(struct seq_file *s, void *unused)
+{
+	struct ti_sci_info *info = s->private;
+
+	memcpy_fromio(info->debug_buffer, info->debug_region,
+		      info->debug_region_size);
+	/*
+	 * We don't trust firmware to leave NULL terminated last byte (hence
+	 * we have allocated 1 extra 0 byte). Since we cannot guarantee any
+	 * specific data format for debug messages, We just present the data
+	 * in the buffer as is - we expect the messages to be self explanatory.
+	 */
+	seq_puts(s, info->debug_buffer);
+	return 0;
+}
+
+/* Provide the log file operations interface*/
+DEFINE_SHOW_ATTRIBUTE(ti_sci_debug);
+
+/**
+ * ti_sci_debugfs_create() - Create log debug file
+ * @pdev:	platform device pointer
+ * @info:	Pointer to SCI entity information
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static int ti_sci_debugfs_create(struct platform_device *pdev,
+				 struct ti_sci_info *info)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	char debug_name[50];
+
+	/* Debug region is optional */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "debug_messages");
+	info->debug_region = devm_ioremap_resource(dev, res);
+	if (IS_ERR(info->debug_region))
+		return 0;
+	info->debug_region_size = resource_size(res);
+
+	info->debug_buffer = devm_kcalloc(dev, info->debug_region_size + 1,
+					  sizeof(char), GFP_KERNEL);
+	if (!info->debug_buffer)
+		return -ENOMEM;
+	/* Setup NULL termination */
+	info->debug_buffer[info->debug_region_size] = 0;
+
+	snprintf(debug_name, sizeof(debug_name), "ti_sci_debug@%s",
+		 dev_name(dev));
+	info->d = debugfs_create_file(debug_name, 0444, NULL, info,
+				      &ti_sci_debug_fops);
+	if (IS_ERR(info->d))
+		return PTR_ERR(info->d);
+
+	dev_dbg(dev, "Debug region => %p, size = %zu bytes, resource: %pr\n",
+		info->debug_region, info->debug_region_size, res);
+	return 0;
+}
+
+#else /* CONFIG_DEBUG_FS */
+static inline int ti_sci_debugfs_create(struct platform_device *dev,
+					struct ti_sci_info *info)
+{
+	return 0;
+}
+
+static inline void ti_sci_debugfs_destroy(struct platform_device *dev,
+					  struct ti_sci_info *info)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+/**
+ * ti_sci_dump_header_dbg() - Helper to dump a message header.
+ * @dev:	Device pointer corresponding to the SCI entity
+ * @hdr:	pointer to header.
+ */
+static inline void ti_sci_dump_header_dbg(struct device *dev,
+					  struct ti_sci_msg_hdr *hdr)
+{
+	dev_dbg(dev, "MSGHDR:type=0x%04x host=0x%02x seq=0x%02x flags=0x%08x\n",
+		hdr->type, hdr->host, hdr->seq, hdr->flags);
+}
+
+/**
+ * ti_sci_rx_callback() - mailbox client callback for receive messages
+ * @cl:	client pointer
+ * @m:	mailbox message
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+static void ti_sci_rx_callback(struct mbox_client *cl, void *m)
+{
+	struct ti_sci_info *info = cl_to_ti_sci_info(cl);
+	struct device *dev = info->dev;
+	struct ti_sci_xfers_info *minfo = &info->minfo;
+	struct ti_msgmgr_message *mbox_msg = m;
+	struct ti_sci_msg_hdr *hdr = (struct ti_sci_msg_hdr *)mbox_msg->buf;
+	struct ti_sci_xfer *xfer;
+	u8 xfer_id;
+
+	xfer_id = hdr->seq;
+
+	/*
+	 * Are we even expecting this?
+	 * NOTE: barriers were implicit in locks used for modifying the bitmap
+	 */
+	if (!test_bit(xfer_id, minfo->xfer_alloc_table)) {
+		dev_err(dev, "Message for %d is not expected!\n", xfer_id);
+		return;
+	}
+
+	xfer = &minfo->xfer_block[xfer_id];
+
+	/* Is the message of valid length? */
+	if (mbox_msg->len > info->desc->max_msg_size) {
+		dev_err(dev, "Unable to handle %zu xfer(max %d)\n",
+			mbox_msg->len, info->desc->max_msg_size);
+		ti_sci_dump_header_dbg(dev, hdr);
+		return;
+	}
+	if (mbox_msg->len < xfer->rx_len) {
+		dev_err(dev, "Recv xfer %zu < expected %d length\n",
+			mbox_msg->len, xfer->rx_len);
+		ti_sci_dump_header_dbg(dev, hdr);
+		return;
+	}
+
+	ti_sci_dump_header_dbg(dev, hdr);
+	/* Take a copy to the rx buffer.. */
+	memcpy(xfer->xfer_buf, mbox_msg->buf, xfer->rx_len);
+	complete(&xfer->done);
+}
+
+/**
+ * ti_sci_get_one_xfer() - Allocate one message
+ * @info:	Pointer to SCI entity information
+ * @msg_type:	Message type
+ * @msg_flags:	Flag to set for the message
+ * @tx_message_size: transmit message size
+ * @rx_message_size: receive message size
+ *
+ * Helper function which is used by various command functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * This function can sleep depending on pending requests already in the system
+ * for the SCI entity. Further, this also holds a spinlock to maintain integrity
+ * of internal data structures.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static struct ti_sci_xfer *ti_sci_get_one_xfer(struct ti_sci_info *info,
+					       u16 msg_type, u32 msg_flags,
+					       size_t tx_message_size,
+					       size_t rx_message_size)
+{
+	struct ti_sci_xfers_info *minfo = &info->minfo;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_msg_hdr *hdr;
+	unsigned long flags;
+	unsigned long bit_pos;
+	u8 xfer_id;
+	int ret;
+	int timeout;
+
+	/* Ensure we have sane transfer sizes */
+	if (rx_message_size > info->desc->max_msg_size ||
+	    tx_message_size > info->desc->max_msg_size ||
+	    rx_message_size < sizeof(*hdr) || tx_message_size < sizeof(*hdr))
+		return ERR_PTR(-ERANGE);
+
+	/*
+	 * Ensure we have only controlled number of pending messages.
+	 * Ideally, we might just have to wait a single message, be
+	 * conservative and wait 5 times that..
+	 */
+	timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms) * 5;
+	ret = down_timeout(&minfo->sem_xfer_count, timeout);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	/* Keep the locked section as small as possible */
+	spin_lock_irqsave(&minfo->xfer_lock, flags);
+	bit_pos = find_first_zero_bit(minfo->xfer_alloc_table,
+				      info->desc->max_msgs);
+	set_bit(bit_pos, minfo->xfer_alloc_table);
+	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+	/*
+	 * We already ensured in probe that we can have max messages that can
+	 * fit in  hdr.seq - NOTE: this improves access latencies
+	 * to predictable O(1) access, BUT, it opens us to risk if
+	 * remote misbehaves with corrupted message sequence responses.
+	 * If that happens, we are going to be messed up anyways..
+	 */
+	xfer_id = (u8)bit_pos;
+
+	xfer = &minfo->xfer_block[xfer_id];
+
+	hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+	xfer->tx_message.len = tx_message_size;
+	xfer->rx_len = (u8)rx_message_size;
+
+	reinit_completion(&xfer->done);
+
+	hdr->seq = xfer_id;
+	hdr->type = msg_type;
+	hdr->host = info->host_id;
+	hdr->flags = msg_flags;
+
+	return xfer;
+}
+
+/**
+ * ti_sci_put_one_xfer() - Release a message
+ * @minfo:	transfer info pointer
+ * @xfer:	message that was reserved by ti_sci_get_one_xfer
+ *
+ * This holds a spinlock to maintain integrity of internal data structures.
+ */
+static void ti_sci_put_one_xfer(struct ti_sci_xfers_info *minfo,
+				struct ti_sci_xfer *xfer)
+{
+	unsigned long flags;
+	struct ti_sci_msg_hdr *hdr;
+	u8 xfer_id;
+
+	hdr = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+	xfer_id = hdr->seq;
+
+	/*
+	 * Keep the locked section as small as possible
+	 * NOTE: we might escape with smp_mb and no lock here..
+	 * but just be conservative and symmetric.
+	 */
+	spin_lock_irqsave(&minfo->xfer_lock, flags);
+	clear_bit(xfer_id, minfo->xfer_alloc_table);
+	spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+	/* Increment the count for the next user to get through */
+	up(&minfo->sem_xfer_count);
+}
+
+/**
+ * ti_sci_do_xfer() - Do one transfer
+ * @info:	Pointer to SCI entity information
+ * @xfer:	Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no response, if transmit error,
+ *	   return corresponding error, else if all goes well,
+ *	   return 0.
+ */
+static inline int ti_sci_do_xfer(struct ti_sci_info *info,
+				 struct ti_sci_xfer *xfer)
+{
+	int ret;
+	int timeout;
+	struct device *dev = info->dev;
+
+	ret = mbox_send_message(info->chan_tx, &xfer->tx_message);
+	if (ret < 0)
+		return ret;
+
+	ret = 0;
+
+	/* And we wait for the response. */
+	timeout = msecs_to_jiffies(info->desc->max_rx_timeout_ms);
+	if (!wait_for_completion_timeout(&xfer->done, timeout)) {
+		dev_err(dev, "Mbox timedout in resp(caller: %pS)\n",
+			(void *)_RET_IP_);
+		ret = -ETIMEDOUT;
+	}
+	/*
+	 * NOTE: we might prefer not to need the mailbox ticker to manage the
+	 * transfer queueing since the protocol layer queues things by itself.
+	 * Unfortunately, we have to kick the mailbox framework after we have
+	 * received our message.
+	 */
+	mbox_client_txdone(info->chan_tx, ret);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_revision() - command to get the revision of the SCI entity
+ * @info:	Pointer to SCI entity information
+ *
+ * Updates the SCI information in the internal data structure.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_revision(struct ti_sci_info *info)
+{
+	struct device *dev = info->dev;
+	struct ti_sci_handle *handle = &info->handle;
+	struct ti_sci_version_info *ver = &handle->version;
+	struct ti_sci_msg_resp_version *rev_info;
+	struct ti_sci_xfer *xfer;
+	int ret;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(struct ti_sci_msg_hdr),
+				   sizeof(*rev_info));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	rev_info = (struct ti_sci_msg_resp_version *)xfer->xfer_buf;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	ver->abi_major = rev_info->abi_major;
+	ver->abi_minor = rev_info->abi_minor;
+	ver->firmware_revision = rev_info->firmware_revision;
+	strncpy(ver->firmware_description, rev_info->firmware_description,
+		sizeof(ver->firmware_description));
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	return ret;
+}
+
+/**
+ * ti_sci_is_response_ack() - Generic ACK/NACK message checkup
+ * @r:	pointer to response buffer
+ *
+ * Return: true if the response was an ACK, else returns false.
+ */
+static inline bool ti_sci_is_response_ack(void *r)
+{
+	struct ti_sci_msg_hdr *hdr = r;
+
+	return hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK ? true : false;
+}
+
+/**
+ * ti_sci_set_device_state() - Set device state helper
+ * @handle:	pointer to TI SCI handle
+ * @id:		Device identifier
+ * @flags:	flags to setup for the device
+ * @state:	State to move the device to
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_set_device_state(const struct ti_sci_handle *handle,
+				   u32 id, u32 flags, u8 state)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_set_device_state *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_STATE,
+				   flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_device_state *)xfer->xfer_buf;
+	req->id = id;
+	req->state = state;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_get_device_state() - Get device state helper
+ * @handle:	Handle to the device
+ * @id:		Device Identifier
+ * @clcnt:	Pointer to Context Loss Count
+ * @resets:	pointer to resets
+ * @p_state:	pointer to p_state
+ * @c_state:	pointer to c_state
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_get_device_state(const struct ti_sci_handle *handle,
+				   u32 id,  u32 *clcnt,  u32 *resets,
+				    u8 *p_state,  u8 *c_state)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_get_device_state *req;
+	struct ti_sci_msg_resp_get_device_state *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	if (!clcnt && !resets && !p_state && !c_state)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_device_state *)xfer->xfer_buf;
+	req->id = id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_device_state *)xfer->xfer_buf;
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if (clcnt)
+		*clcnt = resp->context_loss_count;
+	if (resets)
+		*resets = resp->resets;
+	if (p_state)
+		*p_state = resp->programmed_state;
+	if (c_state)
+		*c_state = resp->current_state;
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_device() - command to request for device managed by TISCI
+ *			     that can be shared with other hosts.
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_device(const struct ti_sci_handle *handle, u32 id)
+{
+	return ti_sci_set_device_state(handle, id, 0,
+				       MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_cmd_get_device_exclusive() - command to request for device managed by
+ *				       TISCI that is exclusively owned by the
+ *				       requesting host.
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_device_exclusive(const struct ti_sci_handle *handle,
+					   u32 id)
+{
+	return ti_sci_set_device_state(handle, id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_cmd_idle_device() - Command to idle a device managed by TISCI
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_idle_device(const struct ti_sci_handle *handle, u32 id)
+{
+	return ti_sci_set_device_state(handle, id, 0,
+				       MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_cmd_idle_device_exclusive() - Command to idle a device managed by
+ *					TISCI that is exclusively owned by
+ *					requesting host.
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_idle_device_exclusive(const struct ti_sci_handle *handle,
+					    u32 id)
+{
+	return ti_sci_set_device_state(handle, id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_cmd_put_device() - command to release a device managed by TISCI
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_put_device(const struct ti_sci_handle *handle, u32 id)
+{
+	return ti_sci_set_device_state(handle, id,
+				       0, MSG_DEVICE_SW_STATE_AUTO_OFF);
+}
+
+/**
+ * ti_sci_cmd_dev_is_valid() - Is the device valid
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ *
+ * Return: 0 if all went fine and the device ID is valid, else return
+ * appropriate error.
+ */
+static int ti_sci_cmd_dev_is_valid(const struct ti_sci_handle *handle, u32 id)
+{
+	u8 unused;
+
+	/* check the device state which will also tell us if the ID is valid */
+	return ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &unused);
+}
+
+/**
+ * ti_sci_cmd_dev_get_clcnt() - Get context loss counter
+ * @handle:	Pointer to TISCI handle
+ * @id:		Device Identifier
+ * @count:	Pointer to Context Loss counter to populate
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_dev_get_clcnt(const struct ti_sci_handle *handle, u32 id,
+				    u32 *count)
+{
+	return ti_sci_get_device_state(handle, id, count, NULL, NULL, NULL);
+}
+
+/**
+ * ti_sci_cmd_dev_is_idle() - Check if the device is requested to be idle
+ * @handle:	Pointer to TISCI handle
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be idle
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_dev_is_idle(const struct ti_sci_handle *handle, u32 id,
+				  bool *r_state)
+{
+	int ret;
+	u8 state;
+
+	if (!r_state)
+		return -EINVAL;
+
+	ret = ti_sci_get_device_state(handle, id, NULL, NULL, &state, NULL);
+	if (ret)
+		return ret;
+
+	*r_state = (state == MSG_DEVICE_SW_STATE_RETENTION);
+
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_dev_is_stop() - Check if the device is requested to be stopped
+ * @handle:	Pointer to TISCI handle
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be stopped
+ * @curr_state:	true if currently stopped.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_dev_is_stop(const struct ti_sci_handle *handle, u32 id,
+				  bool *r_state,  bool *curr_state)
+{
+	int ret;
+	u8 p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret =
+	    ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF);
+
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_dev_is_on() - Check if the device is requested to be ON
+ * @handle:	Pointer to TISCI handle
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be ON
+ * @curr_state:	true if currently ON and active
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_dev_is_on(const struct ti_sci_handle *handle, u32 id,
+				bool *r_state,  bool *curr_state)
+{
+	int ret;
+	u8 p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret =
+	    ti_sci_get_device_state(handle, id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_ON);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_ON);
+
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_dev_is_trans() - Check if the device is currently transitioning
+ * @handle:	Pointer to TISCI handle
+ * @id:		Device Identifier
+ * @curr_state:	true if currently transitioning.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_dev_is_trans(const struct ti_sci_handle *handle, u32 id,
+				   bool *curr_state)
+{
+	int ret;
+	u8 state;
+
+	if (!curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_get_device_state(handle, id, NULL, NULL, NULL, &state);
+	if (ret)
+		return ret;
+
+	*curr_state = (state == MSG_DEVICE_HW_STATE_TRANS);
+
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_set_device_resets() - command to set resets for device managed
+ *				    by TISCI
+ * @handle:	Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * @id:		Device Identifier
+ * @reset_state: Device specific reset bit field
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_set_device_resets(const struct ti_sci_handle *handle,
+					u32 id, u32 reset_state)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_set_device_resets *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_DEVICE_RESETS,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_device_resets *)xfer->xfer_buf;
+	req->id = id;
+	req->resets = reset_state;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_device_resets() - Get reset state for device managed
+ *				    by TISCI
+ * @handle:		Pointer to TISCI handle
+ * @id:			Device Identifier
+ * @reset_state:	Pointer to reset state to populate
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_device_resets(const struct ti_sci_handle *handle,
+					u32 id, u32 *reset_state)
+{
+	return ti_sci_get_device_state(handle, id, NULL, reset_state, NULL,
+				       NULL);
+}
+
+/**
+ * ti_sci_set_clock_state() - Set clock state helper
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @flags:	Header flags as needed
+ * @state:	State to request for the clock.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_set_clock_state(const struct ti_sci_handle *handle,
+				  u32 dev_id, u32 clk_id,
+				  u32 flags, u8 state)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_set_clock_state *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_STATE,
+				   flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_clock_state *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+	req->request_state = state;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_clock_state() - Get clock state helper
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @programmed_state:	State requested for clock to move to
+ * @current_state:	State that the clock is currently in
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_clock_state(const struct ti_sci_handle *handle,
+				      u32 dev_id, u32 clk_id,
+				      u8 *programmed_state, u8 *current_state)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_get_clock_state *req;
+	struct ti_sci_msg_resp_get_clock_state *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	if (!programmed_state && !current_state)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_STATE,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_clock_state *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_clock_state *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	if (programmed_state)
+		*programmed_state = resp->programmed_state;
+	if (current_state)
+		*current_state = resp->current_state;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_clock() - Get control of a clock from TI SCI
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @needs_ssc: 'true' if Spread Spectrum clock is desired, else 'false'
+ * @can_change_freq: 'true' if frequency change is desired, else 'false'
+ * @enable_input_term: 'true' if input termination is desired, else 'false'
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_get_clock(const struct ti_sci_handle *handle, u32 dev_id,
+				u32 clk_id, bool needs_ssc,
+				bool can_change_freq, bool enable_input_term)
+{
+	u32 flags = 0;
+
+	flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0;
+	flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0;
+	flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0;
+
+	return ti_sci_set_clock_state(handle, dev_id, clk_id, flags,
+				      MSG_CLOCK_SW_STATE_REQ);
+}
+
+/**
+ * ti_sci_cmd_idle_clock() - Idle a clock which is in our control
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_idle_clock(const struct ti_sci_handle *handle,
+				 u32 dev_id, u32 clk_id)
+{
+	return ti_sci_set_clock_state(handle, dev_id, clk_id,
+				      MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE,
+				      MSG_CLOCK_SW_STATE_UNREQ);
+}
+
+/**
+ * ti_sci_cmd_put_clock() - Release a clock from our control back to TISCI
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_put_clock(const struct ti_sci_handle *handle,
+				u32 dev_id, u32 clk_id)
+{
+	return ti_sci_set_clock_state(handle, dev_id, clk_id,
+				      MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE,
+				      MSG_CLOCK_SW_STATE_AUTO);
+}
+
+/**
+ * ti_sci_cmd_clk_is_auto() - Is the clock being auto managed
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is auto managed
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_auto(const struct ti_sci_handle *handle,
+				  u32 dev_id, u32 clk_id, bool *req_state)
+{
+	u8 state = 0;
+	int ret;
+
+	if (!req_state)
+		return -EINVAL;
+
+	ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id, &state, NULL);
+	if (ret)
+		return ret;
+
+	*req_state = (state == MSG_CLOCK_SW_STATE_AUTO);
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_is_on() - Is the clock ON
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and enabled
+ * @curr_state: state indicating if the clock is ready for operation
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_on(const struct ti_sci_handle *handle, u32 dev_id,
+				u32 clk_id, bool *req_state, bool *curr_state)
+{
+	u8 c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id,
+					 &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_REQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_READY);
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_is_off() - Is the clock OFF
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and disabled
+ * @curr_state: state indicating if the clock is NOT ready for operation
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_is_off(const struct ti_sci_handle *handle, u32 dev_id,
+				 u32 clk_id, bool *req_state, bool *curr_state)
+{
+	u8 c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_cmd_get_clock_state(handle, dev_id, clk_id,
+					 &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY);
+	return 0;
+}
+
+/**
+ * ti_sci_cmd_clk_set_parent() - Set the clock source of a specific device clock
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Parent clock identifier to set
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_set_parent(const struct ti_sci_handle *handle,
+				     u32 dev_id, u32 clk_id, u32 parent_id)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_set_clock_parent *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_PARENT,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_clock_parent *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+	if (parent_id < 255) {
+		req->parent_id = parent_id;
+	} else {
+		req->parent_id = 255;
+		req->parent_id_32 = parent_id;
+	}
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_parent() - Get current parent clock source
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Current clock parent
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_parent(const struct ti_sci_handle *handle,
+				     u32 dev_id, u32 clk_id, u32 *parent_id)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_get_clock_parent *req;
+	struct ti_sci_msg_resp_get_clock_parent *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle || !parent_id)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_PARENT,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_clock_parent *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_clock_parent *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else {
+		if (resp->parent_id < 255)
+			*parent_id = resp->parent_id;
+		else
+			*parent_id = resp->parent_id_32;
+	}
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_num_parents() - Get num parents of the current clk source
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @num_parents: Returns he number of parents to the current clock.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_num_parents(const struct ti_sci_handle *handle,
+					  u32 dev_id, u32 clk_id,
+					  u32 *num_parents)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_get_clock_num_parents *req;
+	struct ti_sci_msg_resp_get_clock_num_parents *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle || !num_parents)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_NUM_CLOCK_PARENTS,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_clock_num_parents *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_clock_num_parents *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else {
+		if (resp->num_parents < 255)
+			*num_parents = resp->num_parents;
+		else
+			*num_parents = resp->num_parents_32;
+	}
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_match_freq() - Find a good match for frequency
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @match_freq:	Frequency match in Hz response.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_match_freq(const struct ti_sci_handle *handle,
+					 u32 dev_id, u32 clk_id, u64 min_freq,
+					 u64 target_freq, u64 max_freq,
+					 u64 *match_freq)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_query_clock_freq *req;
+	struct ti_sci_msg_resp_query_clock_freq *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle || !match_freq)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_QUERY_CLOCK_FREQ,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_query_clock_freq *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+	req->min_freq_hz = min_freq;
+	req->target_freq_hz = target_freq;
+	req->max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_query_clock_freq *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+	else
+		*match_freq = resp->freq_hz;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_set_freq() - Set a frequency for clock
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_set_freq(const struct ti_sci_handle *handle,
+				   u32 dev_id, u32 clk_id, u64 min_freq,
+				   u64 target_freq, u64 max_freq)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_set_clock_freq *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CLOCK_FREQ,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_clock_freq *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+	req->min_freq_hz = min_freq;
+	req->target_freq_hz = target_freq;
+	req->max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_clk_get_freq() - Get current frequency
+ * @handle:	pointer to TI SCI handle
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @freq:	Currently frequency in Hz
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_clk_get_freq(const struct ti_sci_handle *handle,
+				   u32 dev_id, u32 clk_id, u64 *freq)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_get_clock_freq *req;
+	struct ti_sci_msg_resp_get_clock_freq *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle || !freq)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_CLOCK_FREQ,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_clock_freq *)xfer->xfer_buf;
+	req->dev_id = dev_id;
+	if (clk_id < 255) {
+		req->clk_id = clk_id;
+	} else {
+		req->clk_id = 255;
+		req->clk_id_32 = clk_id;
+	}
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_clock_freq *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+	else
+		*freq = resp->freq_hz;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+static int ti_sci_cmd_core_reboot(const struct ti_sci_handle *handle)
+{
+	struct ti_sci_info *info;
+	struct ti_sci_msg_req_reboot *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SYS_RESET,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_reboot *)xfer->xfer_buf;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp))
+		ret = -ENODEV;
+	else
+		ret = 0;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_get_resource_range - Helper to get a range of resources assigned
+ *			       to a host. Resource is uniquely identified by
+ *			       type and subtype.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_get_resource_range(const struct ti_sci_handle *handle,
+				     u32 dev_id, u8 subtype, u8 s_host,
+				     u16 *range_start, u16 *range_num)
+{
+	struct ti_sci_msg_resp_get_resource_range *resp;
+	struct ti_sci_msg_req_get_resource_range *req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_RESOURCE_RANGE,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+
+	req = (struct ti_sci_msg_req_get_resource_range *)xfer->xfer_buf;
+	req->secondary_host = s_host;
+	req->type = dev_id & MSG_RM_RESOURCE_TYPE_MASK;
+	req->subtype = subtype & MSG_RM_RESOURCE_SUBTYPE_MASK;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_resource_range *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else if (!resp->range_start && !resp->range_num) {
+		ret = -ENODEV;
+	} else {
+		*range_start = resp->range_start;
+		*range_num = resp->range_num;
+	};
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_resource_range - Get a range of resources assigned to host
+ *				   that is same as ti sci interface host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_get_resource_range(const struct ti_sci_handle *handle,
+					 u32 dev_id, u8 subtype,
+					 u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype,
+					 TI_SCI_IRQ_SECONDARY_HOST_INVALID,
+					 range_start, range_num);
+}
+
+/**
+ * ti_sci_cmd_get_resource_range_from_shost - Get a range of resources
+ *					      assigned to a specified host.
+ * @handle:		Pointer to TISCI handle.
+ * @dev_id:		TISCI device ID.
+ * @subtype:		Resource assignment subtype that is being requested
+ *			from the given device.
+ * @s_host:		Host processor ID to which the resources are allocated
+ * @range_start:	Start index of the resource range
+ * @range_num:		Number of resources in the range
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static
+int ti_sci_cmd_get_resource_range_from_shost(const struct ti_sci_handle *handle,
+					     u32 dev_id, u8 subtype, u8 s_host,
+					     u16 *range_start, u16 *range_num)
+{
+	return ti_sci_get_resource_range(handle, dev_id, subtype, s_host,
+					 range_start, range_num);
+}
+
+/**
+ * ti_sci_manage_irq() - Helper api to configure/release the irq route between
+ *			 the requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ * @type:		Request type irq set or release.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_manage_irq(const struct ti_sci_handle *handle,
+			     u32 valid_params, u16 src_id, u16 src_index,
+			     u16 dst_id, u16 dst_host_irq, u16 ia_id, u16 vint,
+			     u16 global_event, u8 vint_status_bit, u8 s_host,
+			     u16 type)
+{
+	struct ti_sci_msg_req_manage_irq *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, type, TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_manage_irq *)xfer->xfer_buf;
+	req->valid_params = valid_params;
+	req->src_id = src_id;
+	req->src_index = src_index;
+	req->dst_id = dst_id;
+	req->dst_host_irq = dst_host_irq;
+	req->ia_id = ia_id;
+	req->vint = vint;
+	req->global_event = global_event;
+	req->vint_status_bit = vint_status_bit;
+	req->secondary_host = s_host;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_set_irq() - Helper api to configure the irq route between the
+ *		      requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_set_irq(const struct ti_sci_handle *handle, u32 valid_params,
+			  u16 src_id, u16 src_index, u16 dst_id,
+			  u16 dst_host_irq, u16 ia_id, u16 vint,
+			  u16 global_event, u8 vint_status_bit, u8 s_host)
+{
+	pr_debug("%s: IRQ set with valid_params = 0x%x from src = %d, index = %d, to dst = %d, irq = %d,via ia_id = %d, vint = %d, global event = %d,status_bit = %d\n",
+		 __func__, valid_params, src_id, src_index,
+		 dst_id, dst_host_irq, ia_id, vint, global_event,
+		 vint_status_bit);
+
+	return ti_sci_manage_irq(handle, valid_params, src_id, src_index,
+				 dst_id, dst_host_irq, ia_id, vint,
+				 global_event, vint_status_bit, s_host,
+				 TI_SCI_MSG_SET_IRQ);
+}
+
+/**
+ * ti_sci_free_irq() - Helper api to free the irq route between the
+ *			   requested source and destination
+ * @handle:		Pointer to TISCI handle.
+ * @valid_params:	Bit fields defining the validity of certain params
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ * @s_host:		Secondary host ID to which the irq/event is being
+ *			requested for.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_free_irq(const struct ti_sci_handle *handle, u32 valid_params,
+			   u16 src_id, u16 src_index, u16 dst_id,
+			   u16 dst_host_irq, u16 ia_id, u16 vint,
+			   u16 global_event, u8 vint_status_bit, u8 s_host)
+{
+	pr_debug("%s: IRQ release with valid_params = 0x%x from src = %d, index = %d, to dst = %d, irq = %d,via ia_id = %d, vint = %d, global event = %d,status_bit = %d\n",
+		 __func__, valid_params, src_id, src_index,
+		 dst_id, dst_host_irq, ia_id, vint, global_event,
+		 vint_status_bit);
+
+	return ti_sci_manage_irq(handle, valid_params, src_id, src_index,
+				 dst_id, dst_host_irq, ia_id, vint,
+				 global_event, vint_status_bit, s_host,
+				 TI_SCI_MSG_FREE_IRQ);
+}
+
+/**
+ * ti_sci_cmd_set_irq() - Configure a host irq route between the requested
+ *			  source and destination.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @vint_irq:		Boolean specifying if this interrupt belongs to
+ *			Interrupt Aggregator.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_set_irq(const struct ti_sci_handle *handle, u16 src_id,
+			      u16 src_index, u16 dst_id, u16 dst_host_irq)
+{
+	u32 valid_params = MSG_FLAG_DST_ID_VALID | MSG_FLAG_DST_HOST_IRQ_VALID;
+
+	return ti_sci_set_irq(handle, valid_params, src_id, src_index, dst_id,
+			      dst_host_irq, 0, 0, 0, 0, 0);
+}
+
+/**
+ * ti_sci_cmd_set_event_map() - Configure an event based irq route between the
+ *				requested source and Interrupt Aggregator.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_set_event_map(const struct ti_sci_handle *handle,
+				    u16 src_id, u16 src_index, u16 ia_id,
+				    u16 vint, u16 global_event,
+				    u8 vint_status_bit)
+{
+	u32 valid_params = MSG_FLAG_IA_ID_VALID | MSG_FLAG_VINT_VALID |
+			   MSG_FLAG_GLB_EVNT_VALID |
+			   MSG_FLAG_VINT_STS_BIT_VALID;
+
+	return ti_sci_set_irq(handle, valid_params, src_id, src_index, 0, 0,
+			      ia_id, vint, global_event, vint_status_bit, 0);
+}
+
+/**
+ * ti_sci_cmd_free_irq() - Free a host irq route between the between the
+ *			   requested source and destination.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @dst_id:		Device ID of the IRQ destination
+ * @dst_host_irq:	IRQ number of the destination device
+ * @vint_irq:		Boolean specifying if this interrupt belongs to
+ *			Interrupt Aggregator.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_free_irq(const struct ti_sci_handle *handle, u16 src_id,
+			       u16 src_index, u16 dst_id, u16 dst_host_irq)
+{
+	u32 valid_params = MSG_FLAG_DST_ID_VALID | MSG_FLAG_DST_HOST_IRQ_VALID;
+
+	return ti_sci_free_irq(handle, valid_params, src_id, src_index, dst_id,
+			       dst_host_irq, 0, 0, 0, 0, 0);
+}
+
+/**
+ * ti_sci_cmd_free_event_map() - Free an event map between the requested source
+ *				 and Interrupt Aggregator.
+ * @handle:		Pointer to TISCI handle.
+ * @src_id:		Device ID of the IRQ source
+ * @src_index:		IRQ source index within the source device
+ * @ia_id:		Device ID of the IA, if the IRQ flows through this IA
+ * @vint:		Virtual interrupt to be used within the IA
+ * @global_event:	Global event number to be used for the requesting event
+ * @vint_status_bit:	Virtual interrupt status bit to be used for the event
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int ti_sci_cmd_free_event_map(const struct ti_sci_handle *handle,
+				     u16 src_id, u16 src_index, u16 ia_id,
+				     u16 vint, u16 global_event,
+				     u8 vint_status_bit)
+{
+	u32 valid_params = MSG_FLAG_IA_ID_VALID |
+			   MSG_FLAG_VINT_VALID | MSG_FLAG_GLB_EVNT_VALID |
+			   MSG_FLAG_VINT_STS_BIT_VALID;
+
+	return ti_sci_free_irq(handle, valid_params, src_id, src_index, 0, 0,
+			       ia_id, vint, global_event, vint_status_bit, 0);
+}
+
+/**
+ * ti_sci_cmd_ring_config() - configure RA ring
+ * @handle:		Pointer to TI SCI handle.
+ * @valid_params:	Bitfield defining validity of ring configuration
+ *			parameters
+ * @nav_id:		Device ID of Navigator Subsystem from which the ring is
+ *			allocated
+ * @index:		Ring index
+ * @addr_lo:		The ring base address lo 32 bits
+ * @addr_hi:		The ring base address hi 32 bits
+ * @count:		Number of ring elements
+ * @mode:		The mode of the ring
+ * @size:		The ring element size.
+ * @order_id:		Specifies the ring's bus order ID
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_ring_cfg_req for more info.
+ */
+static int ti_sci_cmd_ring_config(const struct ti_sci_handle *handle,
+				  u32 valid_params, u16 nav_id, u16 index,
+				  u32 addr_lo, u32 addr_hi, u32 count,
+				  u8 mode, u8 size, u8 order_id)
+{
+	struct ti_sci_msg_rm_ring_cfg_req *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_RING_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RM_RA:Message config failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_ring_cfg_req *)xfer->xfer_buf;
+	req->valid_params = valid_params;
+	req->nav_id = nav_id;
+	req->index = index;
+	req->addr_lo = addr_lo;
+	req->addr_hi = addr_hi;
+	req->count = count;
+	req->mode = mode;
+	req->size = size;
+	req->order_id = order_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RM_RA:Mbox config send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(dev, "RM_RA:config ring %u ret:%d\n", index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_ring_get_config() - get RA ring configuration
+ * @handle:	Pointer to TI SCI handle.
+ * @nav_id:	Device ID of Navigator Subsystem from which the ring is
+ *		allocated
+ * @index:	Ring index
+ * @addr_lo:	Returns ring's base address lo 32 bits
+ * @addr_hi:	Returns ring's base address hi 32 bits
+ * @count:	Returns number of ring elements
+ * @mode:	Returns mode of the ring
+ * @size:	Returns ring element size
+ * @order_id:	Returns ring's bus order ID
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_ring_get_cfg_req for more info.
+ */
+static int ti_sci_cmd_ring_get_config(const struct ti_sci_handle *handle,
+				      u32 nav_id, u32 index, u8 *mode,
+				      u32 *addr_lo, u32 *addr_hi,
+				      u32 *count, u8 *size, u8 *order_id)
+{
+	struct ti_sci_msg_rm_ring_get_cfg_resp *resp;
+	struct ti_sci_msg_rm_ring_get_cfg_req *req;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_RING_GET_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev,
+			"RM_RA:Message get config failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_ring_get_cfg_req *)xfer->xfer_buf;
+	req->nav_id = nav_id;
+	req->index = index;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RM_RA:Mbox get config send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_rm_ring_get_cfg_resp *)xfer->xfer_buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else {
+		if (mode)
+			*mode = resp->mode;
+		if (addr_lo)
+			*addr_lo = resp->addr_lo;
+		if (addr_hi)
+			*addr_hi = resp->addr_hi;
+		if (count)
+			*count = resp->count;
+		if (size)
+			*size = resp->size;
+		if (order_id)
+			*order_id = resp->order_id;
+	};
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(dev, "RM_RA:get config ring %u ret:%d\n", index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_rm_psil_pair() - Pair PSI-L source to destination thread
+ * @handle:	Pointer to TI SCI handle.
+ * @nav_id:	Device ID of Navigator Subsystem which should be used for
+ *		pairing
+ * @src_thread:	Source PSI-L thread ID
+ * @dst_thread: Destination PSI-L thread ID
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_rm_psil_pair(const struct ti_sci_handle *handle,
+				   u32 nav_id, u32 src_thread, u32 dst_thread)
+{
+	struct ti_sci_msg_psil_pair *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_PSIL_PAIR,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RM_PSIL:Message reconfig failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_psil_pair *)xfer->xfer_buf;
+	req->nav_id = nav_id;
+	req->src_thread = src_thread;
+	req->dst_thread = dst_thread;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RM_PSIL:Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_rm_psil_unpair() - Unpair PSI-L source from destination thread
+ * @handle:	Pointer to TI SCI handle.
+ * @nav_id:	Device ID of Navigator Subsystem which should be used for
+ *		unpairing
+ * @src_thread:	Source PSI-L thread ID
+ * @dst_thread:	Destination PSI-L thread ID
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_rm_psil_unpair(const struct ti_sci_handle *handle,
+				     u32 nav_id, u32 src_thread, u32 dst_thread)
+{
+	struct ti_sci_msg_psil_unpair *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_RM_PSIL_UNPAIR,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RM_PSIL:Message reconfig failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_psil_unpair *)xfer->xfer_buf;
+	req->nav_id = nav_id;
+	req->src_thread = src_thread;
+	req->dst_thread = dst_thread;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RM_PSIL:Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_rm_udmap_tx_ch_cfg() - Configure a UDMAP TX channel
+ * @handle:	Pointer to TI SCI handle.
+ * @params:	Pointer to ti_sci_msg_rm_udmap_tx_ch_cfg TX channel config
+ *		structure
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_udmap_tx_ch_cfg and @ti_sci_msg_rm_udmap_tx_ch_cfg_req for
+ * more info.
+ */
+static int ti_sci_cmd_rm_udmap_tx_ch_cfg(const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_tx_ch_cfg_req *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_TX_CH_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message TX_CH_CFG alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_udmap_tx_ch_cfg_req *)xfer->xfer_buf;
+	req->valid_params = params->valid_params;
+	req->nav_id = params->nav_id;
+	req->index = params->index;
+	req->tx_pause_on_err = params->tx_pause_on_err;
+	req->tx_filt_einfo = params->tx_filt_einfo;
+	req->tx_filt_pswords = params->tx_filt_pswords;
+	req->tx_atype = params->tx_atype;
+	req->tx_chan_type = params->tx_chan_type;
+	req->tx_supr_tdpkt = params->tx_supr_tdpkt;
+	req->tx_fetch_size = params->tx_fetch_size;
+	req->tx_credit_count = params->tx_credit_count;
+	req->txcq_qnum = params->txcq_qnum;
+	req->tx_priority = params->tx_priority;
+	req->tx_qos = params->tx_qos;
+	req->tx_orderid = params->tx_orderid;
+	req->fdepth = params->fdepth;
+	req->tx_sched_priority = params->tx_sched_priority;
+	req->tx_burst_size = params->tx_burst_size;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send TX_CH_CFG fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(dev, "TX_CH_CFG: chn %u ret:%u\n", params->index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_rm_udmap_rx_ch_cfg() - Configure a UDMAP RX channel
+ * @handle:	Pointer to TI SCI handle.
+ * @params:	Pointer to ti_sci_msg_rm_udmap_rx_ch_cfg RX channel config
+ *		structure
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_udmap_rx_ch_cfg and @ti_sci_msg_rm_udmap_rx_ch_cfg_req for
+ * more info.
+ */
+static int ti_sci_cmd_rm_udmap_rx_ch_cfg(const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_rx_ch_cfg_req *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_RX_CH_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message RX_CH_CFG alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_udmap_rx_ch_cfg_req *)xfer->xfer_buf;
+	req->valid_params = params->valid_params;
+	req->nav_id = params->nav_id;
+	req->index = params->index;
+	req->rx_fetch_size = params->rx_fetch_size;
+	req->rxcq_qnum = params->rxcq_qnum;
+	req->rx_priority = params->rx_priority;
+	req->rx_qos = params->rx_qos;
+	req->rx_orderid = params->rx_orderid;
+	req->rx_sched_priority = params->rx_sched_priority;
+	req->flowid_start = params->flowid_start;
+	req->flowid_cnt = params->flowid_cnt;
+	req->rx_pause_on_err = params->rx_pause_on_err;
+	req->rx_atype = params->rx_atype;
+	req->rx_chan_type = params->rx_chan_type;
+	req->rx_ignore_short = params->rx_ignore_short;
+	req->rx_ignore_long = params->rx_ignore_long;
+	req->rx_burst_size = params->rx_burst_size;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send RX_CH_CFG fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(dev, "RX_CH_CFG: chn %u ret:%d\n", params->index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_rm_udmap_rx_flow_cfg() - Configure UDMAP RX FLOW
+ * @handle:	Pointer to TI SCI handle.
+ * @params:	Pointer to ti_sci_msg_rm_udmap_flow_cfg RX FLOW config
+ *		structure
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ *
+ * See @ti_sci_msg_rm_udmap_flow_cfg and @ti_sci_msg_rm_udmap_flow_cfg_req for
+ * more info.
+ */
+static int ti_sci_cmd_rm_udmap_rx_flow_cfg(const struct ti_sci_handle *handle,
+			const struct ti_sci_msg_rm_udmap_flow_cfg *params)
+{
+	struct ti_sci_msg_rm_udmap_flow_cfg_req *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info;
+	struct device *dev;
+	int ret = 0;
+
+	if (IS_ERR_OR_NULL(handle))
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TISCI_MSG_RM_UDMAP_FLOW_CFG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "RX_FL_CFG: Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_rm_udmap_flow_cfg_req *)xfer->xfer_buf;
+	req->valid_params = params->valid_params;
+	req->nav_id = params->nav_id;
+	req->flow_index = params->flow_index;
+	req->rx_einfo_present = params->rx_einfo_present;
+	req->rx_psinfo_present = params->rx_psinfo_present;
+	req->rx_error_handling = params->rx_error_handling;
+	req->rx_desc_type = params->rx_desc_type;
+	req->rx_sop_offset = params->rx_sop_offset;
+	req->rx_dest_qnum = params->rx_dest_qnum;
+	req->rx_src_tag_hi = params->rx_src_tag_hi;
+	req->rx_src_tag_lo = params->rx_src_tag_lo;
+	req->rx_dest_tag_hi = params->rx_dest_tag_hi;
+	req->rx_dest_tag_lo = params->rx_dest_tag_lo;
+	req->rx_src_tag_hi_sel = params->rx_src_tag_hi_sel;
+	req->rx_src_tag_lo_sel = params->rx_src_tag_lo_sel;
+	req->rx_dest_tag_hi_sel = params->rx_dest_tag_hi_sel;
+	req->rx_dest_tag_lo_sel = params->rx_dest_tag_lo_sel;
+	req->rx_fdq0_sz0_qnum = params->rx_fdq0_sz0_qnum;
+	req->rx_fdq1_qnum = params->rx_fdq1_qnum;
+	req->rx_fdq2_qnum = params->rx_fdq2_qnum;
+	req->rx_fdq3_qnum = params->rx_fdq3_qnum;
+	req->rx_ps_location = params->rx_ps_location;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "RX_FL_CFG: Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->xfer_buf;
+	ret = ti_sci_is_response_ack(resp) ? 0 : -EINVAL;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+	dev_dbg(info->dev, "RX_FL_CFG: %u ret:%d\n", params->flow_index, ret);
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_request() - Command to request a physical processor control
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_request(const struct ti_sci_handle *handle,
+				   u8 proc_id)
+{
+	struct ti_sci_msg_req_proc_request *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_REQUEST,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_proc_request *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_release() - Command to release a physical processor control
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_release(const struct ti_sci_handle *handle,
+				   u8 proc_id)
+{
+	struct ti_sci_msg_req_proc_release *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_RELEASE,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_proc_release *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_handover() - Command to handover a physical processor
+ *				control to a host in the processor's access
+ *				control list.
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ * @host_id:	Host ID to get the control of the processor
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle,
+				    u8 proc_id, u8 host_id)
+{
+	struct ti_sci_msg_req_proc_handover *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_PROC_HANDOVER,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_proc_handover *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+	req->host_id = host_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_set_config() - Command to set the processor boot
+ *				    configuration flags
+ * @handle:		Pointer to TI SCI handle
+ * @proc_id:		Processor ID this request is for
+ * @config_flags_set:	Configuration flags to be set
+ * @config_flags_clear:	Configuration flags to be cleared.
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_set_config(const struct ti_sci_handle *handle,
+				      u8 proc_id, u64 bootvector,
+				      u32 config_flags_set,
+				      u32 config_flags_clear)
+{
+	struct ti_sci_msg_req_set_config *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CONFIG,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_config *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+	req->bootvector_low = bootvector & TI_SCI_ADDR_LOW_MASK;
+	req->bootvector_high = (bootvector & TI_SCI_ADDR_HIGH_MASK) >>
+				TI_SCI_ADDR_HIGH_SHIFT;
+	req->config_flags_set = config_flags_set;
+	req->config_flags_clear = config_flags_clear;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_proc_set_control() - Command to set the processor boot
+ *				     control flags
+ * @handle:			Pointer to TI SCI handle
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_set_control(const struct ti_sci_handle *handle,
+				       u8 proc_id, u32 control_flags_set,
+				       u32 control_flags_clear)
+{
+	struct ti_sci_msg_req_set_ctrl *req;
+	struct ti_sci_msg_hdr *resp;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_SET_CTRL,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_set_ctrl *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+	req->control_flags_set = control_flags_set;
+	req->control_flags_clear = control_flags_clear;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_hdr *)xfer->tx_message.buf;
+
+	ret = ti_sci_is_response_ack(resp) ? 0 : -ENODEV;
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/**
+ * ti_sci_cmd_get_boot_status() - Command to get the processor boot status
+ * @handle:	Pointer to TI SCI handle
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+static int ti_sci_cmd_proc_get_status(const struct ti_sci_handle *handle,
+				      u8 proc_id, u64 *bv, u32 *cfg_flags,
+				      u32 *ctrl_flags, u32 *sts_flags)
+{
+	struct ti_sci_msg_resp_get_status *resp;
+	struct ti_sci_msg_req_get_status *req;
+	struct ti_sci_info *info;
+	struct ti_sci_xfer *xfer;
+	struct device *dev;
+	int ret = 0;
+
+	if (!handle)
+		return -EINVAL;
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+
+	info = handle_to_ti_sci_info(handle);
+	dev = info->dev;
+
+	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_STATUS,
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
+	if (IS_ERR(xfer)) {
+		ret = PTR_ERR(xfer);
+		dev_err(dev, "Message alloc failed(%d)\n", ret);
+		return ret;
+	}
+	req = (struct ti_sci_msg_req_get_status *)xfer->xfer_buf;
+	req->processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(info, xfer);
+	if (ret) {
+		dev_err(dev, "Mbox send fail %d\n", ret);
+		goto fail;
+	}
+
+	resp = (struct ti_sci_msg_resp_get_status *)xfer->tx_message.buf;
+
+	if (!ti_sci_is_response_ack(resp)) {
+		ret = -ENODEV;
+	} else {
+		*bv = (resp->bootvector_low & TI_SCI_ADDR_LOW_MASK) |
+		      (((u64)resp->bootvector_high << TI_SCI_ADDR_HIGH_SHIFT) &
+		       TI_SCI_ADDR_HIGH_MASK);
+		*cfg_flags = resp->config_flags;
+		*ctrl_flags = resp->control_flags;
+		*sts_flags = resp->status_flags;
+	}
+
+fail:
+	ti_sci_put_one_xfer(&info->minfo, xfer);
+
+	return ret;
+}
+
+/*
+ * ti_sci_setup_ops() - Setup the operations structures
+ * @info:	pointer to TISCI pointer
+ */
+static void ti_sci_setup_ops(struct ti_sci_info *info)
+{
+	struct ti_sci_ops *ops = &info->handle.ops;
+	struct ti_sci_core_ops *core_ops = &ops->core_ops;
+	struct ti_sci_dev_ops *dops = &ops->dev_ops;
+	struct ti_sci_clk_ops *cops = &ops->clk_ops;
+	struct ti_sci_rm_core_ops *rm_core_ops = &ops->rm_core_ops;
+	struct ti_sci_rm_irq_ops *iops = &ops->rm_irq_ops;
+	struct ti_sci_rm_ringacc_ops *rops = &ops->rm_ring_ops;
+	struct ti_sci_rm_psil_ops *psilops = &ops->rm_psil_ops;
+	struct ti_sci_rm_udmap_ops *udmap_ops = &ops->rm_udmap_ops;
+	struct ti_sci_proc_ops *pops = &ops->proc_ops;
+
+	core_ops->reboot_device = ti_sci_cmd_core_reboot;
+
+	dops->get_device = ti_sci_cmd_get_device;
+	dops->get_device_exclusive = ti_sci_cmd_get_device_exclusive;
+	dops->idle_device = ti_sci_cmd_idle_device;
+	dops->idle_device_exclusive = ti_sci_cmd_idle_device_exclusive;
+	dops->put_device = ti_sci_cmd_put_device;
+
+	dops->is_valid = ti_sci_cmd_dev_is_valid;
+	dops->get_context_loss_count = ti_sci_cmd_dev_get_clcnt;
+	dops->is_idle = ti_sci_cmd_dev_is_idle;
+	dops->is_stop = ti_sci_cmd_dev_is_stop;
+	dops->is_on = ti_sci_cmd_dev_is_on;
+	dops->is_transitioning = ti_sci_cmd_dev_is_trans;
+	dops->set_device_resets = ti_sci_cmd_set_device_resets;
+	dops->get_device_resets = ti_sci_cmd_get_device_resets;
+
+	cops->get_clock = ti_sci_cmd_get_clock;
+	cops->idle_clock = ti_sci_cmd_idle_clock;
+	cops->put_clock = ti_sci_cmd_put_clock;
+	cops->is_auto = ti_sci_cmd_clk_is_auto;
+	cops->is_on = ti_sci_cmd_clk_is_on;
+	cops->is_off = ti_sci_cmd_clk_is_off;
+
+	cops->set_parent = ti_sci_cmd_clk_set_parent;
+	cops->get_parent = ti_sci_cmd_clk_get_parent;
+	cops->get_num_parents = ti_sci_cmd_clk_get_num_parents;
+
+	cops->get_best_match_freq = ti_sci_cmd_clk_get_match_freq;
+	cops->set_freq = ti_sci_cmd_clk_set_freq;
+	cops->get_freq = ti_sci_cmd_clk_get_freq;
+
+	rm_core_ops->get_range = ti_sci_cmd_get_resource_range;
+	rm_core_ops->get_range_from_shost =
+				ti_sci_cmd_get_resource_range_from_shost;
+
+	iops->set_irq = ti_sci_cmd_set_irq;
+	iops->set_event_map = ti_sci_cmd_set_event_map;
+	iops->free_irq = ti_sci_cmd_free_irq;
+	iops->free_event_map = ti_sci_cmd_free_event_map;
+
+	rops->config = ti_sci_cmd_ring_config;
+	rops->get_config = ti_sci_cmd_ring_get_config;
+
+	psilops->pair = ti_sci_cmd_rm_psil_pair;
+	psilops->unpair = ti_sci_cmd_rm_psil_unpair;
+
+	udmap_ops->tx_ch_cfg = ti_sci_cmd_rm_udmap_tx_ch_cfg;
+	udmap_ops->rx_ch_cfg = ti_sci_cmd_rm_udmap_rx_ch_cfg;
+	udmap_ops->rx_flow_cfg = ti_sci_cmd_rm_udmap_rx_flow_cfg;
+
+	pops->request = ti_sci_cmd_proc_request;
+	pops->release = ti_sci_cmd_proc_release;
+	pops->handover = ti_sci_cmd_proc_handover;
+	pops->set_config = ti_sci_cmd_proc_set_config;
+	pops->set_control = ti_sci_cmd_proc_set_control;
+	pops->get_status = ti_sci_cmd_proc_get_status;
+}
+
+/**
+ * ti_sci_get_handle() - Get the TI SCI handle for a device
+ * @dev:	Pointer to device for which we want SCI handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ * ti_sci_put_handle must be balanced with successful ti_sci_get_handle
+ * Return: pointer to handle if successful, else:
+ * -EPROBE_DEFER if the instance is not ready
+ * -ENODEV if the required node handler is missing
+ * -EINVAL if invalid conditions are encountered.
+ */
+const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
+{
+	struct device_node *ti_sci_np;
+	struct list_head *p;
+	struct ti_sci_handle *handle = NULL;
+	struct ti_sci_info *info;
+
+	if (!dev) {
+		pr_err("I need a device pointer\n");
+		return ERR_PTR(-EINVAL);
+	}
+	ti_sci_np = of_get_parent(dev->of_node);
+	if (!ti_sci_np) {
+		dev_err(dev, "No OF information\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	mutex_lock(&ti_sci_list_mutex);
+	list_for_each(p, &ti_sci_list) {
+		info = list_entry(p, struct ti_sci_info, node);
+		if (ti_sci_np == info->dev->of_node) {
+			handle = &info->handle;
+			info->users++;
+			break;
+		}
+	}
+	mutex_unlock(&ti_sci_list_mutex);
+	of_node_put(ti_sci_np);
+
+	if (!handle)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return handle;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_handle);
+
+/**
+ * ti_sci_put_handle() - Release the handle acquired by ti_sci_get_handle
+ * @handle:	Handle acquired by ti_sci_get_handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ * ti_sci_put_handle must be balanced with successful ti_sci_get_handle
+ *
+ * Return: 0 is successfully released
+ * if an error pointer was passed, it returns the error value back,
+ * if null was passed, it returns -EINVAL;
+ */
+int ti_sci_put_handle(const struct ti_sci_handle *handle)
+{
+	struct ti_sci_info *info;
+
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
+	if (!handle)
+		return -EINVAL;
+
+	info = handle_to_ti_sci_info(handle);
+	mutex_lock(&ti_sci_list_mutex);
+	if (!WARN_ON(!info->users))
+		info->users--;
+	mutex_unlock(&ti_sci_list_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ti_sci_put_handle);
+
+static void devm_ti_sci_release(struct device *dev, void *res)
+{
+	const struct ti_sci_handle **ptr = res;
+	const struct ti_sci_handle *handle = *ptr;
+	int ret;
+
+	ret = ti_sci_put_handle(handle);
+	if (ret)
+		dev_err(dev, "failed to put handle %d\n", ret);
+}
+
+/**
+ * devm_ti_sci_get_handle() - Managed get handle
+ * @dev:	device for which we want SCI handle for.
+ *
+ * NOTE: This releases the handle once the device resources are
+ * no longer needed. MUST NOT BE released with ti_sci_put_handle.
+ * The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
+{
+	const struct ti_sci_handle **ptr;
+	const struct ti_sci_handle *handle;
+
+	ptr = devres_alloc(devm_ti_sci_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+	handle = ti_sci_get_handle(dev);
+
+	if (!IS_ERR(handle)) {
+		*ptr = handle;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return handle;
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_handle);
+
+/**
+ * ti_sci_get_by_phandle() - Get the TI SCI handle using DT phandle
+ * @np:		device node
+ * @property:	property name containing phandle on TISCI node
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ * ti_sci_put_handle must be balanced with successful ti_sci_get_by_phandle
+ * Return: pointer to handle if successful, else:
+ * -EPROBE_DEFER if the instance is not ready
+ * -ENODEV if the required node handler is missing
+ * -EINVAL if invalid conditions are encountered.
+ */
+const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
+						  const char *property)
+{
+	struct ti_sci_handle *handle = NULL;
+	struct device_node *ti_sci_np;
+	struct ti_sci_info *info;
+	struct list_head *p;
+
+	if (!np) {
+		pr_err("I need a device pointer\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ti_sci_np = of_parse_phandle(np, property, 0);
+	if (!ti_sci_np)
+		return ERR_PTR(-ENODEV);
+
+	mutex_lock(&ti_sci_list_mutex);
+	list_for_each(p, &ti_sci_list) {
+		info = list_entry(p, struct ti_sci_info, node);
+		if (ti_sci_np == info->dev->of_node) {
+			handle = &info->handle;
+			info->users++;
+			break;
+		}
+	}
+	mutex_unlock(&ti_sci_list_mutex);
+	of_node_put(ti_sci_np);
+
+	if (!handle)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return handle;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_by_phandle);
+
+/**
+ * devm_ti_sci_get_by_phandle() - Managed get handle using phandle
+ * @dev:	Device pointer requesting TISCI handle
+ * @property:	property name containing phandle on TISCI node
+ *
+ * NOTE: This releases the handle once the device resources are
+ * no longer needed. MUST NOT BE released with ti_sci_put_handle.
+ * The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of TI SCI protocol library.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
+						       const char *property)
+{
+	const struct ti_sci_handle *handle;
+	const struct ti_sci_handle **ptr;
+
+	ptr = devres_alloc(devm_ti_sci_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+	handle = ti_sci_get_by_phandle(dev_of_node(dev), property);
+
+	if (!IS_ERR(handle)) {
+		*ptr = handle;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return handle;
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_by_phandle);
+
+/**
+ * ti_sci_get_free_resource() - Get a free resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ *
+ * Return: resource num if all went ok else TI_SCI_RESOURCE_NULL.
+ */
+u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
+{
+	unsigned long flags;
+	u16 set, free_bit;
+
+	raw_spin_lock_irqsave(&res->lock, flags);
+	for (set = 0; set < res->sets; set++) {
+		free_bit = find_first_zero_bit(res->desc[set].res_map,
+					       res->desc[set].num);
+		if (free_bit != res->desc[set].num) {
+			set_bit(free_bit, res->desc[set].res_map);
+			raw_spin_unlock_irqrestore(&res->lock, flags);
+			return res->desc[set].start + free_bit;
+		}
+	}
+	raw_spin_unlock_irqrestore(&res->lock, flags);
+
+	return TI_SCI_RESOURCE_NULL;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_free_resource);
+
+/**
+ * ti_sci_release_resource() - Release a resource from TISCI resource.
+ * @res:	Pointer to the TISCI resource
+ * @id:		Resource id to be released.
+ */
+void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
+{
+	unsigned long flags;
+	u16 set;
+
+	raw_spin_lock_irqsave(&res->lock, flags);
+	for (set = 0; set < res->sets; set++) {
+		if (res->desc[set].start <= id &&
+		    (res->desc[set].num + res->desc[set].start) > id)
+			clear_bit(id - res->desc[set].start,
+				  res->desc[set].res_map);
+	}
+	raw_spin_unlock_irqrestore(&res->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ti_sci_release_resource);
+
+/**
+ * ti_sci_get_num_resources() - Get the number of resources in TISCI resource
+ * @res:	Pointer to the TISCI resource
+ *
+ * Return: Total number of available resources.
+ */
+u32 ti_sci_get_num_resources(struct ti_sci_resource *res)
+{
+	u32 set, count = 0;
+
+	for (set = 0; set < res->sets; set++)
+		count += res->desc[set].num;
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(ti_sci_get_num_resources);
+
+/**
+ * devm_ti_sci_get_resource_sets() - Get a TISCI resources assigned to a device
+ * @handle:	TISCI handle
+ * @dev:	Device pointer to which the resource is assigned
+ * @dev_id:	TISCI device id to which the resource is assigned
+ * @sub_types:	Array of sub_types assigned corresponding to device
+ * @sets:	Number of sub_types
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ *	   error pointer.
+ */
+static struct ti_sci_resource *
+devm_ti_sci_get_resource_sets(const struct ti_sci_handle *handle,
+			      struct device *dev, u32 dev_id, u32 *sub_types,
+			      u32 sets)
+{
+	struct ti_sci_resource *res;
+	bool valid_set = false;
+	int i, ret;
+
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return ERR_PTR(-ENOMEM);
+
+	res->sets = sets;
+	res->desc = devm_kcalloc(dev, res->sets, sizeof(*res->desc),
+				 GFP_KERNEL);
+	if (!res->desc)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < res->sets; i++) {
+		ret = handle->ops.rm_core_ops.get_range(handle, dev_id,
+							sub_types[i],
+							&res->desc[i].start,
+							&res->desc[i].num);
+		if (ret) {
+			dev_dbg(dev, "dev = %d subtype %d not allocated for this host\n",
+				dev_id, sub_types[i]);
+			res->desc[i].start = 0;
+			res->desc[i].num = 0;
+			continue;
+		}
+
+		dev_dbg(dev, "dev = %d, subtype = %d, start = %d, num = %d\n",
+			dev_id, sub_types[i], res->desc[i].start,
+			res->desc[i].num);
+
+		valid_set = true;
+		res->desc[i].res_map =
+			devm_kzalloc(dev, BITS_TO_LONGS(res->desc[i].num) *
+				     sizeof(*res->desc[i].res_map), GFP_KERNEL);
+		if (!res->desc[i].res_map)
+			return ERR_PTR(-ENOMEM);
+	}
+	raw_spin_lock_init(&res->lock);
+
+	if (valid_set)
+		return res;
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * devm_ti_sci_get_of_resource() - Get a TISCI resource assigned to a device
+ * @handle:	TISCI handle
+ * @dev:	Device pointer to which the resource is assigned
+ * @dev_id:	TISCI device id to which the resource is assigned
+ * @of_prop:	property name by which the resource are represented
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ *	   error pointer.
+ */
+struct ti_sci_resource *
+devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
+			    struct device *dev, u32 dev_id, char *of_prop)
+{
+	struct ti_sci_resource *res;
+	u32 *sub_types;
+	int sets;
+
+	sets = of_property_count_elems_of_size(dev_of_node(dev), of_prop,
+					       sizeof(u32));
+	if (sets < 0) {
+		dev_err(dev, "%s resource type ids not available\n", of_prop);
+		return ERR_PTR(sets);
+	}
+
+	sub_types = kcalloc(sets, sizeof(*sub_types), GFP_KERNEL);
+	if (!sub_types)
+		return ERR_PTR(-ENOMEM);
+
+	of_property_read_u32_array(dev_of_node(dev), of_prop, sub_types, sets);
+	res = devm_ti_sci_get_resource_sets(handle, dev, dev_id, sub_types,
+					    sets);
+
+	kfree(sub_types);
+	return res;
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_of_resource);
+
+/**
+ * devm_ti_sci_get_resource() - Get a resource range assigned to the device
+ * @handle:	TISCI handle
+ * @dev:	Device pointer to which the resource is assigned
+ * @dev_id:	TISCI device id to which the resource is assigned
+ * @suub_type:	TISCI resource subytpe representing the resource.
+ *
+ * Return: Pointer to ti_sci_resource if all went well else appropriate
+ *	   error pointer.
+ */
+struct ti_sci_resource *
+devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
+			 u32 dev_id, u32 sub_type)
+{
+	return devm_ti_sci_get_resource_sets(handle, dev, dev_id, &sub_type, 1);
+}
+EXPORT_SYMBOL_GPL(devm_ti_sci_get_resource);
+
+static int tisci_reboot_handler(struct notifier_block *nb, unsigned long mode,
+				void *cmd)
+{
+	struct ti_sci_info *info = reboot_to_ti_sci_info(nb);
+	const struct ti_sci_handle *handle = &info->handle;
+
+	ti_sci_cmd_core_reboot(handle);
+
+	/* call fail OR pass, we should not be here in the first place */
+	return NOTIFY_BAD;
+}
+
+/* Description for K2G */
+static const struct ti_sci_desc ti_sci_pmmc_k2g_desc = {
+	.default_host_id = 2,
+	/* Conservative duration */
+	.max_rx_timeout_ms = 1000,
+	/* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
+	.max_msgs = 20,
+	.max_msg_size = 64,
+};
+
+/* Description for AM654 */
+static const struct ti_sci_desc ti_sci_pmmc_am654_desc = {
+	.default_host_id = 12,
+	/* Conservative duration */
+	.max_rx_timeout_ms = 10000,
+	/* Limited by MBOX_TX_QUEUE_LEN. K2G can handle upto 128 messages! */
+	.max_msgs = 20,
+	.max_msg_size = 60,
+};
+
+static const struct of_device_id ti_sci_of_match[] = {
+	{.compatible = "ti,k2g-sci", .data = &ti_sci_pmmc_k2g_desc},
+	{.compatible = "ti,am654-sci", .data = &ti_sci_pmmc_am654_desc},
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_of_match);
+
+static int ti_sci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	const struct ti_sci_desc *desc;
+	struct ti_sci_xfer *xfer;
+	struct ti_sci_info *info = NULL;
+	struct ti_sci_xfers_info *minfo;
+	struct mbox_client *cl;
+	int ret = -EINVAL;
+	int i;
+	int reboot = 0;
+	u32 h_id;
+
+	of_id = of_match_device(ti_sci_of_match, dev);
+	if (!of_id) {
+		dev_err(dev, "OF data missing\n");
+		return -EINVAL;
+	}
+	desc = of_id->data;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->desc = desc;
+	ret = of_property_read_u32(dev->of_node, "ti,host-id", &h_id);
+	/* if the property is not present in DT, use a default from desc */
+	if (ret < 0) {
+		info->host_id = info->desc->default_host_id;
+	} else {
+		if (!h_id) {
+			dev_warn(dev, "Host ID 0 is reserved for firmware\n");
+			info->host_id = info->desc->default_host_id;
+		} else {
+			info->host_id = h_id;
+		}
+	}
+
+	reboot = of_property_read_bool(dev->of_node,
+				       "ti,system-reboot-controller");
+	INIT_LIST_HEAD(&info->node);
+	minfo = &info->minfo;
+
+	/*
+	 * Pre-allocate messages
+	 * NEVER allocate more than what we can indicate in hdr.seq
+	 * if we have data description bug, force a fix..
+	 */
+	if (WARN_ON(desc->max_msgs >=
+		    1 << 8 * sizeof(((struct ti_sci_msg_hdr *)0)->seq)))
+		return -EINVAL;
+
+	minfo->xfer_block = devm_kcalloc(dev,
+					 desc->max_msgs,
+					 sizeof(*minfo->xfer_block),
+					 GFP_KERNEL);
+	if (!minfo->xfer_block)
+		return -ENOMEM;
+
+	minfo->xfer_alloc_table = devm_kcalloc(dev,
+					       BITS_TO_LONGS(desc->max_msgs),
+					       sizeof(unsigned long),
+					       GFP_KERNEL);
+	if (!minfo->xfer_alloc_table)
+		return -ENOMEM;
+	bitmap_zero(minfo->xfer_alloc_table, desc->max_msgs);
+
+	/* Pre-initialize the buffer pointer to pre-allocated buffers */
+	for (i = 0, xfer = minfo->xfer_block; i < desc->max_msgs; i++, xfer++) {
+		xfer->xfer_buf = devm_kcalloc(dev, 1, desc->max_msg_size,
+					      GFP_KERNEL);
+		if (!xfer->xfer_buf)
+			return -ENOMEM;
+
+		xfer->tx_message.buf = xfer->xfer_buf;
+		init_completion(&xfer->done);
+	}
+
+	ret = ti_sci_debugfs_create(pdev, info);
+	if (ret)
+		dev_warn(dev, "Failed to create debug file\n");
+
+	platform_set_drvdata(pdev, info);
+
+	cl = &info->cl;
+	cl->dev = dev;
+	cl->tx_block = false;
+	cl->rx_callback = ti_sci_rx_callback;
+	cl->knows_txdone = true;
+
+	spin_lock_init(&minfo->xfer_lock);
+	sema_init(&minfo->sem_xfer_count, desc->max_msgs);
+
+	info->chan_rx = mbox_request_channel_byname(cl, "rx");
+	if (IS_ERR(info->chan_rx)) {
+		ret = PTR_ERR(info->chan_rx);
+		goto out;
+	}
+
+	info->chan_tx = mbox_request_channel_byname(cl, "tx");
+	if (IS_ERR(info->chan_tx)) {
+		ret = PTR_ERR(info->chan_tx);
+		goto out;
+	}
+	ret = ti_sci_cmd_get_revision(info);
+	if (ret) {
+		dev_err(dev, "Unable to communicate with TISCI(%d)\n", ret);
+		goto out;
+	}
+
+	ti_sci_setup_ops(info);
+
+	if (reboot) {
+		info->nb.notifier_call = tisci_reboot_handler;
+		info->nb.priority = 128;
+
+		ret = register_restart_handler(&info->nb);
+		if (ret) {
+			dev_err(dev, "reboot registration fail(%d)\n", ret);
+			return ret;
+		}
+	}
+
+	dev_info(dev, "ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+		 info->handle.version.abi_major, info->handle.version.abi_minor,
+		 info->handle.version.firmware_revision,
+		 info->handle.version.firmware_description);
+
+	mutex_lock(&ti_sci_list_mutex);
+	list_add_tail(&info->node, &ti_sci_list);
+	mutex_unlock(&ti_sci_list_mutex);
+
+	return of_platform_populate(dev->of_node, NULL, NULL, dev);
+out:
+	if (!IS_ERR(info->chan_tx))
+		mbox_free_channel(info->chan_tx);
+	if (!IS_ERR(info->chan_rx))
+		mbox_free_channel(info->chan_rx);
+	debugfs_remove(info->d);
+	return ret;
+}
+
+static struct platform_driver ti_sci_driver = {
+	.probe = ti_sci_probe,
+	.driver = {
+		   .name = "ti-sci",
+		   .of_match_table = of_match_ptr(ti_sci_of_match),
+		   .suppress_bind_attrs = true,
+	},
+};
+module_platform_driver(ti_sci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI System Control Interface(SCI) driver");
+MODULE_AUTHOR("Nishanth Menon");
+MODULE_ALIAS("platform:ti-sci");
diff --git a/drivers/firmware/ti_sci.h b/drivers/firmware/ti_sci.h
new file mode 100644
index 000000000..57cd04062
--- /dev/null
+++ b/drivers/firmware/ti_sci.h
@@ -0,0 +1,1417 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Texas Instruments System Control Interface (TISCI) Protocol
+ *
+ * Communication protocol with TI SCI hardware
+ * The system works in a message response protocol
+ * See: http://processors.wiki.ti.com/index.php/TISCI for details
+ *
+ * Copyright (C)  2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef __TI_SCI_H
+#define __TI_SCI_H
+
+/* Generic Messages */
+#define TI_SCI_MSG_ENABLE_WDT	0x0000
+#define TI_SCI_MSG_WAKE_RESET	0x0001
+#define TI_SCI_MSG_VERSION	0x0002
+#define TI_SCI_MSG_WAKE_REASON	0x0003
+#define TI_SCI_MSG_GOODBYE	0x0004
+#define TI_SCI_MSG_SYS_RESET	0x0005
+
+/* Device requests */
+#define TI_SCI_MSG_SET_DEVICE_STATE	0x0200
+#define TI_SCI_MSG_GET_DEVICE_STATE	0x0201
+#define TI_SCI_MSG_SET_DEVICE_RESETS	0x0202
+
+/* Clock requests */
+#define TI_SCI_MSG_SET_CLOCK_STATE	0x0100
+#define TI_SCI_MSG_GET_CLOCK_STATE	0x0101
+#define TI_SCI_MSG_SET_CLOCK_PARENT	0x0102
+#define TI_SCI_MSG_GET_CLOCK_PARENT	0x0103
+#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
+#define TI_SCI_MSG_SET_CLOCK_FREQ	0x010c
+#define TI_SCI_MSG_QUERY_CLOCK_FREQ	0x010d
+#define TI_SCI_MSG_GET_CLOCK_FREQ	0x010e
+
+/* Resource Management Requests */
+#define TI_SCI_MSG_GET_RESOURCE_RANGE	0x1500
+
+/* IRQ requests */
+#define TI_SCI_MSG_SET_IRQ		0x1000
+#define TI_SCI_MSG_FREE_IRQ		0x1001
+
+/* NAVSS resource management */
+/* Ringacc requests */
+#define TI_SCI_MSG_RM_RING_ALLOCATE		0x1100
+#define TI_SCI_MSG_RM_RING_FREE			0x1101
+#define TI_SCI_MSG_RM_RING_RECONFIG		0x1102
+#define TI_SCI_MSG_RM_RING_RESET		0x1103
+#define TI_SCI_MSG_RM_RING_CFG			0x1110
+#define TI_SCI_MSG_RM_RING_GET_CFG		0x1111
+
+/* PSI-L requests */
+#define TI_SCI_MSG_RM_PSIL_PAIR			0x1280
+#define TI_SCI_MSG_RM_PSIL_UNPAIR		0x1281
+
+#define TI_SCI_MSG_RM_UDMAP_TX_ALLOC		0x1200
+#define TI_SCI_MSG_RM_UDMAP_TX_FREE		0x1201
+#define TI_SCI_MSG_RM_UDMAP_RX_ALLOC		0x1210
+#define TI_SCI_MSG_RM_UDMAP_RX_FREE		0x1211
+#define TI_SCI_MSG_RM_UDMAP_FLOW_CFG		0x1220
+#define TI_SCI_MSG_RM_UDMAP_OPT_FLOW_CFG	0x1221
+
+#define TISCI_MSG_RM_UDMAP_TX_CH_CFG		0x1205
+#define TISCI_MSG_RM_UDMAP_TX_CH_GET_CFG	0x1206
+#define TISCI_MSG_RM_UDMAP_RX_CH_CFG		0x1215
+#define TISCI_MSG_RM_UDMAP_RX_CH_GET_CFG	0x1216
+#define TISCI_MSG_RM_UDMAP_FLOW_CFG		0x1230
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_CFG	0x1231
+#define TISCI_MSG_RM_UDMAP_FLOW_GET_CFG		0x1232
+#define TISCI_MSG_RM_UDMAP_FLOW_SIZE_THRESH_GET_CFG	0x1233
+
+/* Processor Control requests */
+#define TI_SCI_MSG_PROC_REQUEST		0xc000
+#define TI_SCI_MSG_PROC_RELEASE		0xc001
+#define TI_SCI_MSG_PROC_HANDOVER	0xc005
+#define TI_SCI_MSG_SET_CONFIG		0xc100
+#define TI_SCI_MSG_SET_CTRL		0xc101
+#define TI_SCI_MSG_GET_STATUS		0xc400
+
+/**
+ * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
+ * @type:	Type of messages: One of TI_SCI_MSG* values
+ * @host:	Host of the message
+ * @seq:	Message identifier indicating a transfer sequence
+ * @flags:	Flag for the message
+ */
+struct ti_sci_msg_hdr {
+	u16 type;
+	u8 host;
+	u8 seq;
+#define TI_SCI_MSG_FLAG(val)			(1 << (val))
+#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE	0x0
+#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED		TI_SCI_MSG_FLAG(0)
+#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED	TI_SCI_MSG_FLAG(1)
+#define TI_SCI_FLAG_RESP_GENERIC_NACK		0x0
+#define TI_SCI_FLAG_RESP_GENERIC_ACK		TI_SCI_MSG_FLAG(1)
+	/* Additional Flags */
+	u32 flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_version - Response for a message
+ * @hdr:		Generic header
+ * @firmware_description: String describing the firmware
+ * @firmware_revision:	Firmware revision
+ * @abi_major:		Major version of the ABI that firmware supports
+ * @abi_minor:		Minor version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_resp_version {
+	struct ti_sci_msg_hdr hdr;
+	char firmware_description[32];
+	u16 firmware_revision;
+	u8 abi_major;
+	u8 abi_minor;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_reboot - Reboot the SoC
+ * @hdr:	Generic Header
+ *
+ * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_reboot {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_state - Set the desired state of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @reserved: Reserved space in message, must be 0 for backward compatibility
+ * @state: The desired state of the device.
+ *
+ * Certain flags can also be set to alter the device state:
+ * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source.
+ * The meaning of this flag will vary slightly from device to device and from
+ * SoC to SoC but it generally allows the device to wake the SoC out of deep
+ * suspend states.
+ * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device.
+ * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed
+ * with STATE_RETENTION or STATE_ON, it will claim the device exclusively.
+ * If another host already has this device set to STATE_RETENTION or STATE_ON,
+ * the message will fail. Once successful, other hosts attempting to set
+ * STATE_RETENTION or STATE_ON will fail.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_DEVICE_WAKE_ENABLED	TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_DEVICE_RESET_ISO	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_DEVICE_EXCLUSIVE	TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+	u32 reserved;
+
+#define MSG_DEVICE_SW_STATE_AUTO_OFF	0
+#define MSG_DEVICE_SW_STATE_RETENTION	1
+#define MSG_DEVICE_SW_STATE_ON		2
+	u8 state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_device_state - Request to get device.
+ * @hdr:		Generic header
+ * @id:		Device Identifier
+ *
+ * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state
+ * information
+ */
+struct ti_sci_msg_req_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_device_state - Response to get device request.
+ * @hdr:		Generic header
+ * @context_loss_count: Indicates how many times the device has lost context. A
+ *	driver can use this monotonic counter to determine if the device has
+ *	lost context since the last time this message was exchanged.
+ * @resets: Programmed state of the reset lines.
+ * @programmed_state:	The state as programmed by set_device.
+ *			- Uses the MSG_DEVICE_SW_* macros
+ * @current_state:	The actual state of the hardware.
+ *
+ * Response to request TI_SCI_MSG_GET_DEVICE_STATE.
+ */
+struct ti_sci_msg_resp_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 context_loss_count;
+	u32 resets;
+	u8 programmed_state;
+#define MSG_DEVICE_HW_STATE_OFF		0
+#define MSG_DEVICE_HW_STATE_ON		1
+#define MSG_DEVICE_HW_STATE_TRANS	2
+	u8 current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_resets - Set the desired resets
+ *				configuration of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @resets: A bit field of resets for the device. The meaning, behavior,
+ *	and usage of the reset flags are device specific. 0 for a bit
+ *	indicates releasing the reset represented by that bit while 1
+ *	indicates keeping it held.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_resets {
+	struct ti_sci_msg_hdr hdr;
+	u32 id;
+	u32 resets;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
+ * @hdr:	Generic Header, Certain flags can be set specific to the clocks:
+ *		MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
+ *		via spread spectrum clocking.
+ *		MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
+ *		frequency to be changed while it is running so long as it
+ *		is within the min/max limits.
+ *		MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
+ *		is only applicable to clock inputs on the SoC pseudo-device.
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
+ * @request_state: Request the state for the clock to be set to.
+ *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
+ *		it can be disabled, regardless of the state of the device
+ *		MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
+ *		automatically manage the state of this clock. If the device
+ *		is enabled, then the clock is enabled. If the device is set
+ *		to off or retention, then the clock is internally set as not
+ *		being required by the device.(default)
+ *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
+ *		regardless of the state of the device.
+ * @clk_id_32:	Clock identifier for the device for this request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
+ *
+ * Normally, all required clocks are managed by TISCI entity, this is used
+ * only for specific control *IF* required. Auto managed state is
+ * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
+ * will explicitly control.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
+ * ACK or NACK message.
+ */
+struct ti_sci_msg_req_set_clock_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_CLOCK_ALLOW_SSC		TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_CLOCK_INPUT_TERM		TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+#define MSG_CLOCK_SW_STATE_UNREQ	0
+#define MSG_CLOCK_SW_STATE_AUTO		1
+#define MSG_CLOCK_SW_STATE_REQ		2
+	u8 request_state;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_state - Request for clock state
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get state of. Set to 255 if the clock
+ *		ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier for the device for the request.
+ *		Only to be used if the clock ID is greater than or equal to
+ *		255.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
+ * of the clock
+ */
+struct ti_sci_msg_req_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_state - Response to get clock state
+ * @hdr:	Generic Header
+ * @programmed_state: Any programmed state of the clock. This is one of
+ *		MSG_CLOCK_SW_STATE* values.
+ * @current_state: Current state of the clock. This is one of:
+ *		MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
+ *		MSG_CLOCK_HW_STATE_READY: Clock is ready
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_STATE.
+ */
+struct ti_sci_msg_resp_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	u8 programmed_state;
+#define MSG_CLOCK_HW_STATE_NOT_READY	0
+#define MSG_CLOCK_HW_STATE_READY	1
+	u8 current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_parent - Set the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify. Set to 255 if clock ID is
+ *		greater than or equal to 255.
+ * @parent_id:	The new clock parent is selectable by an index via this
+ *		parameter. Set to 255 if clock ID is greater than or
+ *		equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is 255.
+ * @parent_id_32:	Parent identifier if @parent_id is 255.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
+ * ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u8 parent_id;
+	u32 clk_id_32;
+	u32 parent_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_parent - Get the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get the parent for. If this field
+ *		contains 255, the actual clock identifier is stored in
+ *		@clk_id_32.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
+ */
+struct ti_sci_msg_req_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
+ * @hdr:	Generic Header
+ * @parent_id:	The current clock parent. If set to 255, the current parent
+ *		ID can be found from the @parent_id_32 field.
+ * @parent_id_32:	Current clock parent if @parent_id field is set to
+ *			255.
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
+ */
+struct ti_sci_msg_resp_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	u8 parent_id;
+	u32 parent_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
+ * @hdr:	Generic header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if the @clk_id field contains 255.
+ *
+ * This request provides information about how many clock parent options
+ * are available for a given clock to a device. This is typically used
+ * for input clocks.
+ *
+ * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
+ * @hdr:		Generic header
+ * @num_parents:	Number of clock parents. If set to 255, the actual
+ *			number of parents is stored into @num_parents_32
+ *			field instead.
+ * @num_parents_32:	Number of clock parents if @num_parents field is
+ *			set to 255.
+ *
+ * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
+ */
+struct ti_sci_msg_resp_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	u8 num_parents;
+	u32 num_parents_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. A frequency will be found
+ *		as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock identifier is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested frequency within provided range and responds with
+ * result message.
+ *
+ * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
+ * or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u64 min_freq_hz;
+	u64 target_freq_hz;
+	u64 max_freq_hz;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that is the best match in Hz.
+ *
+ * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
+ * cannot be satisfied, the message will be of type NACK.
+ */
+struct ti_sci_msg_resp_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u64 freq_hz;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. The clock will be programmed
+ *		at a rate as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested range and responds with success/failure message.
+ *
+ * This sets the desired frequency for a clock within an allowable
+ * range. This message will fail on an enabled clock unless
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
+ * if other clocks have their frequency modified due to this message,
+ * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
+ *
+ * Calling set frequency on a clock input to the SoC pseudo-device will
+ * inform the PMMC of that clock's frequency. Setting a frequency of
+ * zero will indicate the clock is disabled.
+ *
+ * Calling set frequency on clock outputs from the SoC pseudo-device will
+ * function similarly to setting the clock frequency on a device.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u64 min_freq_hz;
+	u64 target_freq_hz;
+	u64 max_freq_hz;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request. Set to
+ *		255 if clock ID is greater than or equal to 255.
+ * @clk_id_32:	Clock identifier if @clk_id field is set to 255.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In some cases, clock frequencies are configured by host.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
+ * that the clock is currently at.
+ */
+struct ti_sci_msg_req_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u32 dev_id;
+	u8 clk_id;
+	u32 clk_id_32;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that the clock is currently on, in Hz.
+ *
+ * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
+ */
+struct ti_sci_msg_resp_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	u64 freq_hz;
+} __packed;
+
+#define TI_SCI_IRQ_SECONDARY_HOST_INVALID	0xff
+
+/**
+ * struct ti_sci_msg_req_get_resource_range - Request to get a host's assigned
+ *					      range of resources.
+ * @hdr:		Generic Header
+ * @type:		Unique resource assignment type
+ * @subtype:		Resource assignment subtype within the resource type.
+ * @secondary_host:	Host processing entity to which the resources are
+ *			allocated. This is required only when the destination
+ *			host id id different from ti sci interface host id,
+ *			else TI_SCI_IRQ_SECONDARY_HOST_INVALID can be passed.
+ *
+ * Request type is TI_SCI_MSG_GET_RESOURCE_RANGE. Responded with requested
+ * resource range which is of type TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_req_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_RM_RESOURCE_TYPE_MASK	GENMASK(9, 0)
+#define MSG_RM_RESOURCE_SUBTYPE_MASK	GENMASK(5, 0)
+	u16 type;
+	u8 subtype;
+	u8 secondary_host;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_resource_range - Response to resource get range.
+ * @hdr:		Generic Header
+ * @range_start:	Start index of the resource range.
+ * @range_num:		Number of resources in the range.
+ *
+ * Response to request TI_SCI_MSG_GET_RESOURCE_RANGE.
+ */
+struct ti_sci_msg_resp_get_resource_range {
+	struct ti_sci_msg_hdr hdr;
+	u16 range_start;
+	u16 range_num;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_manage_irq - Request to configure/release the route
+ *					between the dev and the host.
+ * @hdr:		Generic Header
+ * @valid_params:	Bit fields defining the validity of interrupt source
+ *			parameters. If a bit is not set, then corresponding
+ *			field is not valid and will not be used for route set.
+ *			Bit field definitions:
+ *			0 - Valid bit for @dst_id
+ *			1 - Valid bit for @dst_host_irq
+ *			2 - Valid bit for @ia_id
+ *			3 - Valid bit for @vint
+ *			4 - Valid bit for @global_event
+ *			5 - Valid bit for @vint_status_bit_index
+ *			31 - Valid bit for @secondary_host
+ * @src_id:		IRQ source peripheral ID.
+ * @src_index:		IRQ source index within the peripheral
+ * @dst_id:		IRQ Destination ID. Based on the architecture it can be
+ *			IRQ controller or host processor ID.
+ * @dst_host_irq:	IRQ number of the destination host IRQ controller
+ * @ia_id:		Device ID of the interrupt aggregator in which the
+ *			vint resides.
+ * @vint:		Virtual interrupt number if the interrupt route
+ *			is through an interrupt aggregator.
+ * @global_event:	Global event that is to be mapped to interrupt
+ *			aggregator virtual interrupt status bit.
+ * @vint_status_bit:	Virtual interrupt status bit if the interrupt route
+ *			utilizes an interrupt aggregator status bit.
+ * @secondary_host:	Host ID of the IRQ destination computing entity. This is
+ *			required only when destination host id is different
+ *			from ti sci interface host id.
+ *
+ * Request type is TI_SCI_MSG_SET/RELEASE_IRQ.
+ * Response is generic ACK / NACK message.
+ */
+struct ti_sci_msg_req_manage_irq {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_FLAG_DST_ID_VALID			TI_SCI_MSG_FLAG(0)
+#define MSG_FLAG_DST_HOST_IRQ_VALID		TI_SCI_MSG_FLAG(1)
+#define MSG_FLAG_IA_ID_VALID			TI_SCI_MSG_FLAG(2)
+#define MSG_FLAG_VINT_VALID			TI_SCI_MSG_FLAG(3)
+#define MSG_FLAG_GLB_EVNT_VALID			TI_SCI_MSG_FLAG(4)
+#define MSG_FLAG_VINT_STS_BIT_VALID		TI_SCI_MSG_FLAG(5)
+#define MSG_FLAG_SHOST_VALID			TI_SCI_MSG_FLAG(31)
+	u32 valid_params;
+	u16 src_id;
+	u16 src_index;
+	u16 dst_id;
+	u16 dst_host_irq;
+	u16 ia_id;
+	u16 vint;
+	u16 global_event;
+	u8 vint_status_bit;
+	u8 secondary_host;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_cfg_req - Configure a Navigator Subsystem ring
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem ring.
+ * @hdr:	Generic Header
+ * @valid_params: Bitfield defining validity of ring configuration parameters.
+ *	The ring configuration fields are not valid, and will not be used for
+ *	ring configuration, if their corresponding valid bit is zero.
+ *	Valid bit usage:
+ *	0 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_lo
+ *	1 - Valid bit for @tisci_msg_rm_ring_cfg_req addr_hi
+ *	2 - Valid bit for @tisci_msg_rm_ring_cfg_req count
+ *	3 - Valid bit for @tisci_msg_rm_ring_cfg_req mode
+ *	4 - Valid bit for @tisci_msg_rm_ring_cfg_req size
+ *	5 - Valid bit for @tisci_msg_rm_ring_cfg_req order_id
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: ring index to be configured.
+ * @addr_lo: 32 LSBs of ring base address to be programmed into the ring's
+ *	RING_BA_LO register
+ * @addr_hi: 16 MSBs of ring base address to be programmed into the ring's
+ *	RING_BA_HI register.
+ * @count: Number of ring elements. Must be even if mode is CREDENTIALS or QM
+ *	modes.
+ * @mode: Specifies the mode the ring is to be configured.
+ * @size: Specifies encoded ring element size. To calculate the encoded size use
+ *	the formula (log2(size_bytes) - 2), where size_bytes cannot be
+ *	greater than 256.
+ * @order_id: Specifies the ring's bus order ID.
+ */
+struct ti_sci_msg_rm_ring_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 count;
+	u8 mode;
+	u8 size;
+	u8 order_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_get_cfg_req - Get RA ring's configuration
+ *
+ * Gets the configuration of the non-real-time register fields of a ring.  The
+ * host, or a supervisor of the host, who owns the ring must be the requesting
+ * host.  The values of the non-real-time registers are returned in
+ * @ti_sci_msg_rm_ring_get_cfg_resp.
+ *
+ * @hdr: Generic Header
+ * @nav_id: Device ID of Navigator Subsystem from which the ring is allocated
+ * @index: ring index.
+ */
+struct ti_sci_msg_rm_ring_get_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u16 nav_id;
+	u16 index;
+} __packed;
+
+/**
+ * struct ti_sci_msg_rm_ring_get_cfg_resp -  Ring get configuration response
+ *
+ * Response received by host processor after RM has handled
+ * @ti_sci_msg_rm_ring_get_cfg_req. The response contains the ring's
+ * non-real-time register values.
+ *
+ * @hdr: Generic Header
+ * @addr_lo: Ring 32 LSBs of base address
+ * @addr_hi: Ring 16 MSBs of base address.
+ * @count: Ring number of elements.
+ * @mode: Ring mode.
+ * @size: encoded Ring element size
+ * @order_id: ing order ID.
+ */
+struct ti_sci_msg_rm_ring_get_cfg_resp {
+	struct ti_sci_msg_hdr hdr;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 count;
+	u8 mode;
+	u8 size;
+	u8 order_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_pair - Pairs a PSI-L source thread to a destination
+ *				 thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to pair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register programmed with the destination thread if the pairing
+ * is successful.
+
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register programmed with the source thread if the pairing
+ * is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_PAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_pair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * struct ti_sci_msg_psil_unpair - Unpairs a PSI-L source thread from a
+ *				   destination thread
+ * @hdr:	Generic Header
+ * @nav_id:	SoC Navigator Subsystem device ID whose PSI-L config proxy is
+ *		used to unpair the source and destination threads.
+ * @src_thread:	PSI-L source thread ID within the PSI-L System thread map.
+ *
+ * UDMAP transmit channels mapped to source threads will have their
+ * TCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * @dst_thread: PSI-L destination thread ID within the PSI-L System thread map.
+ * PSI-L destination threads start at index 0x8000.  The request is NACK'd if
+ * the destination thread is not greater than or equal to 0x8000.
+ *
+ * UDMAP receive channels mapped to destination threads will have their
+ * RCHAN_THRD_ID register cleared if the unpairing is successful.
+ *
+ * Request type is TI_SCI_MSG_RM_PSIL_UNPAIR, response is a generic ACK or NACK
+ * message.
+ */
+struct ti_sci_msg_psil_unpair {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 src_thread;
+	u32 dst_thread;
+} __packed;
+
+/**
+ * struct ti_sci_msg_udmap_rx_flow_cfg -  UDMAP receive flow configuration
+ *					  message
+ * @hdr: Generic Header
+ * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
+ *	allocated
+ * @flow_index: UDMAP receive flow index for non-optional configuration.
+ * @rx_ch_index: Specifies the index of the receive channel using the flow_index
+ * @rx_einfo_present: UDMAP receive flow extended packet info present.
+ * @rx_psinfo_present: UDMAP receive flow PS words present.
+ * @rx_error_handling: UDMAP receive flow error handling configuration. Valid
+ *	values are TI_SCI_RM_UDMAP_RX_FLOW_ERR_DROP/RETRY.
+ * @rx_desc_type: UDMAP receive flow descriptor type. It can be one of
+ *	TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST/MONO.
+ * @rx_sop_offset: UDMAP receive flow start of packet offset.
+ * @rx_dest_qnum: UDMAP receive flow destination queue number.
+ * @rx_ps_location: UDMAP receive flow PS words location.
+ *	0 - end of packet descriptor
+ *	1 - Beginning of the data buffer
+ * @rx_src_tag_hi: UDMAP receive flow source tag high byte constant
+ * @rx_src_tag_lo: UDMAP receive flow source tag low byte constant
+ * @rx_dest_tag_hi: UDMAP receive flow destination tag high byte constant
+ * @rx_dest_tag_lo: UDMAP receive flow destination tag low byte constant
+ * @rx_src_tag_hi_sel: UDMAP receive flow source tag high byte selector
+ * @rx_src_tag_lo_sel: UDMAP receive flow source tag low byte selector
+ * @rx_dest_tag_hi_sel: UDMAP receive flow destination tag high byte selector
+ * @rx_dest_tag_lo_sel: UDMAP receive flow destination tag low byte selector
+ * @rx_size_thresh_en: UDMAP receive flow packet size based free buffer queue
+ *	enable. If enabled, the ti_sci_rm_udmap_rx_flow_opt_cfg also need to be
+ *	configured and sent.
+ * @rx_fdq0_sz0_qnum: UDMAP receive flow free descriptor queue 0.
+ * @rx_fdq1_qnum: UDMAP receive flow free descriptor queue 1.
+ * @rx_fdq2_qnum: UDMAP receive flow free descriptor queue 2.
+ * @rx_fdq3_qnum: UDMAP receive flow free descriptor queue 3.
+ *
+ * For detailed information on the settings, see the UDMAP section of the TRM.
+ */
+struct ti_sci_msg_udmap_rx_flow_cfg {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 flow_index;
+	u32 rx_ch_index;
+	u8 rx_einfo_present;
+	u8 rx_psinfo_present;
+	u8 rx_error_handling;
+	u8 rx_desc_type;
+	u16 rx_sop_offset;
+	u16 rx_dest_qnum;
+	u8 rx_ps_location;
+	u8 rx_src_tag_hi;
+	u8 rx_src_tag_lo;
+	u8 rx_dest_tag_hi;
+	u8 rx_dest_tag_lo;
+	u8 rx_src_tag_hi_sel;
+	u8 rx_src_tag_lo_sel;
+	u8 rx_dest_tag_hi_sel;
+	u8 rx_dest_tag_lo_sel;
+	u8 rx_size_thresh_en;
+	u16 rx_fdq0_sz0_qnum;
+	u16 rx_fdq1_qnum;
+	u16 rx_fdq2_qnum;
+	u16 rx_fdq3_qnum;
+} __packed;
+
+/**
+ * struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg - parameters for UDMAP receive
+ *						flow optional configuration
+ * @hdr: Generic Header
+ * @nav_id: SoC Navigator Subsystem device ID from which the receive flow is
+ *	allocated
+ * @flow_index: UDMAP receive flow index for optional configuration.
+ * @rx_ch_index: Specifies the index of the receive channel using the flow_index
+ * @rx_size_thresh0: UDMAP receive flow packet size threshold 0.
+ * @rx_size_thresh1: UDMAP receive flow packet size threshold 1.
+ * @rx_size_thresh2: UDMAP receive flow packet size threshold 2.
+ * @rx_fdq0_sz1_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 1.
+ * @rx_fdq0_sz2_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 2.
+ * @rx_fdq0_sz3_qnum: UDMAP receive flow free descriptor queue for size
+ *	threshold 3.
+ *
+ * For detailed information on the settings, see the UDMAP section of the TRM.
+ */
+struct rm_ti_sci_msg_udmap_rx_flow_opt_cfg {
+	struct ti_sci_msg_hdr hdr;
+	u32 nav_id;
+	u32 flow_index;
+	u32 rx_ch_index;
+	u16 rx_size_thresh0;
+	u16 rx_size_thresh1;
+	u16 rx_size_thresh2;
+	u16 rx_fdq0_sz1_qnum;
+	u16 rx_fdq0_sz2_qnum;
+	u16 rx_fdq0_sz3_qnum;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP transmit channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * transmit channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of tx channel configuration
+ * parameters. The tx channel configuration fields are not valid, and will not
+ * be used for ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_pause_on_err
+ *    1 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_atype
+ *    2 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_chan_type
+ *    3 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_fetch_size
+ *    4 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::txcq_qnum
+ *    5 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_priority
+ *    6 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_qos
+ *    7 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_orderid
+ *    8 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_sched_priority
+ *    9 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_einfo
+ *   10 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_filt_pswords
+ *   11 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_supr_tdpkt
+ *   12 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_credit_count
+ *   13 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::fdepth
+ *   14 - Valid bit for @ref ti_sci_msg_rm_udmap_tx_ch_cfg::tx_burst_size
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where tx channel is located
+ *
+ * @index: UDMAP transmit channel index.
+ *
+ * @tx_pause_on_err: UDMAP transmit channel pause on error configuration to
+ * be programmed into the tx_pause_on_err field of the channel's TCHAN_TCFG
+ * register.
+ *
+ * @tx_filt_einfo: UDMAP transmit channel extended packet information passing
+ * configuration to be programmed into the tx_filt_einfo field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_filt_pswords: UDMAP transmit channel protocol specific word passing
+ * configuration to be programmed into the tx_filt_pswords field of the
+ * channel's TCHAN_TCFG register.
+ *
+ * @tx_atype: UDMAP transmit channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the tx_atype field of
+ * the channel's TCHAN_TCFG register.
+ *
+ * @tx_chan_type: UDMAP transmit channel functional channel type and work
+ * passing mechanism configuration to be programmed into the tx_chan_type
+ * field of the channel's TCHAN_TCFG register.
+ *
+ * @tx_supr_tdpkt: UDMAP transmit channel teardown packet generation suppression
+ * configuration to be programmed into the tx_supr_tdpkt field of the channel's
+ * TCHAN_TCFG register.
+ *
+ * @tx_fetch_size: UDMAP transmit channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the tx_fetch_size field of the
+ * channel's TCHAN_TCFG register.  The user must make sure to set the maximum
+ * word count that can pass through the channel for any allowed descriptor type.
+ *
+ * @tx_credit_count: UDMAP transmit channel transfer request credit count
+ * configuration to be programmed into the count field of the TCHAN_TCREDIT
+ * register.  Specifies how many credits for complete TRs are available.
+ *
+ * @txcq_qnum: UDMAP transmit channel completion queue configuration to be
+ * programmed into the txcq_qnum field of the TCHAN_TCQ register. The specified
+ * completion queue must be assigned to the host, or a subordinate of the host,
+ * requesting configuration of the transmit channel.
+ *
+ * @tx_priority: UDMAP transmit channel transmit priority value to be programmed
+ * into the priority field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_qos: UDMAP transmit channel transmit qos value to be programmed into the
+ * qos field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @tx_orderid: UDMAP transmit channel bus order id value to be programmed into
+ * the orderid field of the channel's TCHAN_TPRI_CTRL register.
+ *
+ * @fdepth: UDMAP transmit channel FIFO depth configuration to be programmed
+ * into the fdepth field of the TCHAN_TFIFO_DEPTH register. Sets the number of
+ * Tx FIFO bytes which are allowed to be stored for the channel. Check the UDMAP
+ * section of the TRM for restrictions regarding this parameter.
+ *
+ * @tx_sched_priority: UDMAP transmit channel tx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * TCHAN_TST_SCHED register.
+ *
+ * @tx_burst_size: UDMAP transmit channel burst size configuration to be
+ * programmed into the tx_burst_size field of the TCHAN_TCFG register.
+ */
+struct ti_sci_msg_rm_udmap_tx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u8 tx_pause_on_err;
+	u8 tx_filt_einfo;
+	u8 tx_filt_pswords;
+	u8 tx_atype;
+	u8 tx_chan_type;
+	u8 tx_supr_tdpkt;
+	u16 tx_fetch_size;
+	u8 tx_credit_count;
+	u16 txcq_qnum;
+	u8 tx_priority;
+	u8 tx_qos;
+	u8 tx_orderid;
+	u16 fdepth;
+	u8 tx_sched_priority;
+	u8 tx_burst_size;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive channel
+ *
+ * Configures the non-real-time registers of a Navigator Subsystem UDMAP
+ * receive channel.  The channel index must be assigned to the host defined
+ * in the TISCI header via the RM board configuration resource assignment
+ * range list.
+ *
+ * @hdr: Generic Header
+ *
+ * @valid_params: Bitfield defining validity of rx channel configuration
+ * parameters.
+ * The rx channel configuration fields are not valid, and will not be used for
+ * ch configuration, if their corresponding valid bit is zero.
+ * Valid bit usage:
+ *    0 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_pause_on_err
+ *    1 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_atype
+ *    2 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_chan_type
+ *    3 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_fetch_size
+ *    4 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rxcq_qnum
+ *    5 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_priority
+ *    6 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_qos
+ *    7 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_orderid
+ *    8 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_sched_priority
+ *    9 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_start
+ *   10 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::flowid_cnt
+ *   11 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_short
+ *   12 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_ignore_long
+ *   14 - Valid bit for @ti_sci_msg_rm_udmap_rx_ch_cfg_req::rx_burst_size
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem where rx channel is located
+ *
+ * @index: UDMAP receive channel index.
+ *
+ * @rx_fetch_size: UDMAP receive channel number of 32-bit descriptor words to
+ * fetch configuration to be programmed into the rx_fetch_size field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rxcq_qnum: UDMAP receive channel completion queue configuration to be
+ * programmed into the rxcq_qnum field of the RCHAN_RCQ register.
+ * The specified completion queue must be assigned to the host, or a subordinate
+ * of the host, requesting configuration of the receive channel.
+ *
+ * @rx_priority: UDMAP receive channel receive priority value to be programmed
+ * into the priority field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_qos: UDMAP receive channel receive qos value to be programmed into the
+ * qos field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_orderid: UDMAP receive channel bus order id value to be programmed into
+ * the orderid field of the channel's RCHAN_RPRI_CTRL register.
+ *
+ * @rx_sched_priority: UDMAP receive channel rx scheduling priority
+ * configuration to be programmed into the priority field of the channel's
+ * RCHAN_RST_SCHED register.
+ *
+ * @flowid_start: UDMAP receive channel additional flows starting index
+ * configuration to program into the flow_start field of the RCHAN_RFLOW_RNG
+ * register. Specifies the starting index for flow IDs the receive channel is to
+ * make use of beyond the default flow. flowid_start and @ref flowid_cnt must be
+ * set as valid and configured together. The starting flow ID set by
+ * @ref flowid_cnt must be a flow index within the Navigator Subsystem's subset
+ * of flows beyond the default flows statically mapped to receive channels.
+ * The additional flows must be assigned to the host, or a subordinate of the
+ * host, requesting configuration of the receive channel.
+ *
+ * @flowid_cnt: UDMAP receive channel additional flows count configuration to
+ * program into the flowid_cnt field of the RCHAN_RFLOW_RNG register.
+ * This field specifies how many flow IDs are in the additional contiguous range
+ * of legal flow IDs for the channel.  @ref flowid_start and flowid_cnt must be
+ * set as valid and configured together. Disabling the valid_params field bit
+ * for flowid_cnt indicates no flow IDs other than the default are to be
+ * allocated and used by the receive channel. @ref flowid_start plus flowid_cnt
+ * cannot be greater than the number of receive flows in the receive channel's
+ * Navigator Subsystem.  The additional flows must be assigned to the host, or a
+ * subordinate of the host, requesting configuration of the receive channel.
+ *
+ * @rx_pause_on_err: UDMAP receive channel pause on error configuration to be
+ * programmed into the rx_pause_on_err field of the channel's RCHAN_RCFG
+ * register.
+ *
+ * @rx_atype: UDMAP receive channel non Ring Accelerator access pointer
+ * interpretation configuration to be programmed into the rx_atype field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_chan_type: UDMAP receive channel functional channel type and work passing
+ * mechanism configuration to be programmed into the rx_chan_type field of the
+ * channel's RCHAN_RCFG register.
+ *
+ * @rx_ignore_short: UDMAP receive channel short packet treatment configuration
+ * to be programmed into the rx_ignore_short field of the RCHAN_RCFG register.
+ *
+ * @rx_ignore_long: UDMAP receive channel long packet treatment configuration to
+ * be programmed into the rx_ignore_long field of the RCHAN_RCFG register.
+ *
+ * @rx_burst_size: UDMAP receive channel burst size configuration to be
+ * programmed into the rx_burst_size field of the RCHAN_RCFG register.
+ */
+struct ti_sci_msg_rm_udmap_rx_ch_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 index;
+	u16 rx_fetch_size;
+	u16 rxcq_qnum;
+	u8 rx_priority;
+	u8 rx_qos;
+	u8 rx_orderid;
+	u8 rx_sched_priority;
+	u16 flowid_start;
+	u16 flowid_cnt;
+	u8 rx_pause_on_err;
+	u8 rx_atype;
+	u8 rx_chan_type;
+	u8 rx_ignore_short;
+	u8 rx_ignore_long;
+	u8 rx_burst_size;
+} __packed;
+
+/**
+ * Configures a Navigator Subsystem UDMAP receive flow
+ *
+ * Configures a Navigator Subsystem UDMAP receive flow's registers.
+ * Configuration does not include the flow registers which handle size-based
+ * free descriptor queue routing.
+ *
+ * The flow index must be assigned to the host defined in the TISCI header via
+ * the RM board configuration resource assignment range list.
+ *
+ * @hdr: Standard TISCI header
+ *
+ * @valid_params
+ * Bitfield defining validity of rx flow configuration parameters.  The
+ * rx flow configuration fields are not valid, and will not be used for flow
+ * configuration, if their corresponding valid bit is zero.  Valid bit usage:
+ *     0 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_einfo_present
+ *     1 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_psinfo_present
+ *     2 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_error_handling
+ *     3 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_desc_type
+ *     4 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_sop_offset
+ *     5 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_qnum
+ *     6 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi
+ *     7 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo
+ *     8 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi
+ *     9 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo
+ *    10 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_hi_sel
+ *    11 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_src_tag_lo_sel
+ *    12 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_hi_sel
+ *    13 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_dest_tag_lo_sel
+ *    14 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq0_sz0_qnum
+ *    15 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq1_sz0_qnum
+ *    16 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq2_sz0_qnum
+ *    17 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_fdq3_sz0_qnum
+ *    18 - Valid bit for @tisci_msg_rm_udmap_flow_cfg_req::rx_ps_location
+ *
+ * @nav_id: SoC device ID of Navigator Subsystem from which the receive flow is
+ * allocated
+ *
+ * @flow_index: UDMAP receive flow index for non-optional configuration.
+ *
+ * @rx_einfo_present:
+ * UDMAP receive flow extended packet info present configuration to be
+ * programmed into the rx_einfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_psinfo_present:
+ * UDMAP receive flow PS words present configuration to be programmed into the
+ * rx_psinfo_present field of the flow's RFLOW_RFA register.
+ *
+ * @rx_error_handling:
+ * UDMAP receive flow error handling configuration to be programmed into the
+ * rx_error_handling field of the flow's RFLOW_RFA register.
+ *
+ * @rx_desc_type:
+ * UDMAP receive flow descriptor type configuration to be programmed into the
+ * rx_desc_type field field of the flow's RFLOW_RFA register.
+ *
+ * @rx_sop_offset:
+ * UDMAP receive flow start of packet offset configuration to be programmed
+ * into the rx_sop_offset field of the RFLOW_RFA register.  See the UDMAP
+ * section of the TRM for more information on this setting.  Valid values for
+ * this field are 0-255 bytes.
+ *
+ * @rx_dest_qnum:
+ * UDMAP receive flow destination queue configuration to be programmed into the
+ * rx_dest_qnum field of the flow's RFLOW_RFA register.  The specified
+ * destination queue must be valid within the Navigator Subsystem and must be
+ * owned by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_src_tag_hi:
+ * UDMAP receive flow source tag high byte constant configuration to be
+ * programmed into the rx_src_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo:
+ * UDMAP receive flow source tag low byte constant configuration to be
+ * programmed into the rx_src_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi:
+ * UDMAP receive flow destination tag high byte constant configuration to be
+ * programmed into the rx_dest_tag_hi field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo:
+ * UDMAP receive flow destination tag low byte constant configuration to be
+ * programmed into the rx_dest_tag_lo field of the flow's RFLOW_RFB register.
+ * See the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_hi_sel:
+ * UDMAP receive flow source tag high byte selector configuration to be
+ * programmed into the rx_src_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_src_tag_lo_sel:
+ * UDMAP receive flow source tag low byte selector configuration to be
+ * programmed into the rx_src_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_hi_sel:
+ * UDMAP receive flow destination tag high byte selector configuration to be
+ * programmed into the rx_dest_tag_hi_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_dest_tag_lo_sel:
+ * UDMAP receive flow destination tag low byte selector configuration to be
+ * programmed into the rx_dest_tag_lo_sel field of the RFLOW_RFC register.  See
+ * the UDMAP section of the TRM for more information on this setting.
+ *
+ * @rx_fdq0_sz0_qnum:
+ * UDMAP receive flow free descriptor queue 0 configuration to be programmed
+ * into the rx_fdq0_sz0_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting. The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq1_qnum:
+ * UDMAP receive flow free descriptor queue 1 configuration to be programmed
+ * into the rx_fdq1_qnum field of the flow's RFLOW_RFD register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq2_qnum:
+ * UDMAP receive flow free descriptor queue 2 configuration to be programmed
+ * into the rx_fdq2_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_fdq3_qnum:
+ * UDMAP receive flow free descriptor queue 3 configuration to be programmed
+ * into the rx_fdq3_qnum field of the flow's RFLOW_RFE register.  See the
+ * UDMAP section of the TRM for more information on this setting.  The specified
+ * free queue must be valid within the Navigator Subsystem and must be owned
+ * by the host, or a subordinate of the host, requesting allocation and
+ * configuration of the receive flow.
+ *
+ * @rx_ps_location:
+ * UDMAP receive flow PS words location configuration to be programmed into the
+ * rx_ps_location field of the flow's RFLOW_RFA register.
+ */
+struct ti_sci_msg_rm_udmap_flow_cfg_req {
+	struct ti_sci_msg_hdr hdr;
+	u32 valid_params;
+	u16 nav_id;
+	u16 flow_index;
+	u8 rx_einfo_present;
+	u8 rx_psinfo_present;
+	u8 rx_error_handling;
+	u8 rx_desc_type;
+	u16 rx_sop_offset;
+	u16 rx_dest_qnum;
+	u8 rx_src_tag_hi;
+	u8 rx_src_tag_lo;
+	u8 rx_dest_tag_hi;
+	u8 rx_dest_tag_lo;
+	u8 rx_src_tag_hi_sel;
+	u8 rx_src_tag_lo_sel;
+	u8 rx_dest_tag_hi_sel;
+	u8 rx_dest_tag_lo_sel;
+	u16 rx_fdq0_sz0_qnum;
+	u16 rx_fdq1_qnum;
+	u16 rx_fdq2_qnum;
+	u16 rx_fdq3_qnum;
+	u8 rx_ps_location;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being requested
+ *
+ * Request type is TI_SCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being released
+ *
+ * Request type is TI_SCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being handed over
+ * @host_id:		Host ID the control needs to be transferred to
+ *
+ * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u8 host_id;
+} __packed;
+
+/* Boot Vector masks */
+#define TI_SCI_ADDR_LOW_MASK			GENMASK_ULL(31, 0)
+#define TI_SCI_ADDR_HIGH_MASK			GENMASK_ULL(63, 32)
+#define TI_SCI_ADDR_HIGH_SHIFT			32
+
+/**
+ * struct ti_sci_msg_req_set_config - Set Processor boot configuration
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being configured
+ * @bootvector_low:	Lower 32 bit address (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32 bit address (Little Endian) of boot vector
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies the corresponding mode
+ *			will be set
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies the corresponding mode
+ *			will be cleared
+ *
+ * Request type is TI_SCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_config {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 bootvector_low;
+	u32 bootvector_high;
+	u32 config_flags_set;
+	u32 config_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_ctrl - Set Processor boot control flags
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor being configured
+ * @control_flags_set:	Optional Processor specific Control Flags to set.
+ *			Setting a bit here implies the corresponding mode
+ *			will be set
+ * @control_flags_clear:Optional Processor specific Control Flags to clear.
+ *			Setting a bit here implies the corresponding mode
+ *			will be cleared
+ *
+ * Request type is TI_SCI_MSG_SET_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_ctrl {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 control_flags_set;
+	u32 control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_status - Processor boot status request
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor whose status is being requested
+ *
+ * Request type is TI_SCI_MSG_GET_STATUS, response is an appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_status {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_status - Processor boot status response
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor whose status is returned
+ * @bootvector_low:	Lower 32 bit address (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32 bit address (Little Endian) of boot vector
+ * @config_flags:	Optional Processor specific Config Flags set currently
+ * @control_flags:	Optional Processor specific Control Flags set currently
+ * @status_flags:	Optional Processor specific Status Flags set currently
+ *
+ * Response structure to a TI_SCI_MSG_GET_STATUS request.
+ */
+struct ti_sci_msg_resp_get_status {
+	struct ti_sci_msg_hdr hdr;
+	u8 processor_id;
+	u32 bootvector_low;
+	u32 bootvector_high;
+	u32 config_flags;
+	u32 control_flags;
+	u32 status_flags;
+} __packed;
+
+#endif /* __TI_SCI_H */
diff --git a/drivers/firmware/trusted_foundations.c b/drivers/firmware/trusted_foundations.c
new file mode 100644
index 000000000..1389fa941
--- /dev/null
+++ b/drivers/firmware/trusted_foundations.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Trusted Foundations support for ARM CPUs
+ *
+ * Copyright (c) 2013, NVIDIA Corporation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+
+#include <linux/firmware/trusted_foundations.h>
+
+#include <asm/firmware.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/outercache.h>
+
+#define TF_CACHE_MAINT		0xfffff100
+
+#define TF_CACHE_ENABLE		1
+#define TF_CACHE_DISABLE	2
+#define TF_CACHE_REENABLE	4
+
+#define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200
+
+#define TF_CPU_PM		0xfffffffc
+#define TF_CPU_PM_S3		0xffffffe3
+#define TF_CPU_PM_S2		0xffffffe6
+#define TF_CPU_PM_S2_NO_MC_CLK	0xffffffe5
+#define TF_CPU_PM_S1		0xffffffe4
+#define TF_CPU_PM_S1_NOFLUSH_L2	0xffffffe7
+
+static unsigned long tf_idle_mode = TF_PM_MODE_NONE;
+static unsigned long cpu_boot_addr;
+
+static void tf_generic_smc(u32 type, u32 arg1, u32 arg2)
+{
+	register u32 r0 asm("r0") = type;
+	register u32 r1 asm("r1") = arg1;
+	register u32 r2 asm("r2") = arg2;
+
+	asm volatile(
+		".arch_extension	sec\n\t"
+		"stmfd	sp!, {r4 - r11}\n\t"
+		__asmeq("%0", "r0")
+		__asmeq("%1", "r1")
+		__asmeq("%2", "r2")
+		"mov	r3, #0\n\t"
+		"mov	r4, #0\n\t"
+		"smc	#0\n\t"
+		"ldmfd	sp!, {r4 - r11}\n\t"
+		:
+		: "r" (r0), "r" (r1), "r" (r2)
+		: "memory", "r3", "r12", "lr");
+}
+
+static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
+{
+	cpu_boot_addr = boot_addr;
+	tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, cpu_boot_addr, 0);
+
+	return 0;
+}
+
+static int tf_prepare_idle(unsigned long mode)
+{
+	switch (mode) {
+	case TF_PM_MODE_LP0:
+		tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S3, cpu_boot_addr);
+		break;
+
+	case TF_PM_MODE_LP1:
+		tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S2, cpu_boot_addr);
+		break;
+
+	case TF_PM_MODE_LP1_NO_MC_CLK:
+		tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S2_NO_MC_CLK,
+			       cpu_boot_addr);
+		break;
+
+	case TF_PM_MODE_LP2:
+		tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1, cpu_boot_addr);
+		break;
+
+	case TF_PM_MODE_LP2_NOFLUSH_L2:
+		tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2,
+			       cpu_boot_addr);
+		break;
+
+	case TF_PM_MODE_NONE:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	tf_idle_mode = mode;
+
+	return 0;
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static void tf_cache_write_sec(unsigned long val, unsigned int reg)
+{
+	u32 enable_op, l2x0_way_mask = 0xff;
+
+	switch (reg) {
+	case L2X0_CTRL:
+		if (l2x0_saved_regs.aux_ctrl & L310_AUX_CTRL_ASSOCIATIVITY_16)
+			l2x0_way_mask = 0xffff;
+
+		switch (tf_idle_mode) {
+		case TF_PM_MODE_LP2:
+			enable_op = TF_CACHE_REENABLE;
+			break;
+
+		default:
+			enable_op = TF_CACHE_ENABLE;
+			break;
+		}
+
+		if (val == L2X0_CTRL_EN)
+			tf_generic_smc(TF_CACHE_MAINT, enable_op,
+				       l2x0_saved_regs.aux_ctrl);
+		else
+			tf_generic_smc(TF_CACHE_MAINT, TF_CACHE_DISABLE,
+				       l2x0_way_mask);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int tf_init_cache(void)
+{
+	outer_cache.write_sec = tf_cache_write_sec;
+
+	return 0;
+}
+#endif /* CONFIG_CACHE_L2X0 */
+
+static const struct firmware_ops trusted_foundations_ops = {
+	.set_cpu_boot_addr = tf_set_cpu_boot_addr,
+	.prepare_idle = tf_prepare_idle,
+#ifdef CONFIG_CACHE_L2X0
+	.l2x0_init = tf_init_cache,
+#endif
+};
+
+void register_trusted_foundations(struct trusted_foundations_platform_data *pd)
+{
+	/*
+	 * we are not using version information for now since currently
+	 * supported SMCs are compatible with all TF releases
+	 */
+	register_firmware_ops(&trusted_foundations_ops);
+}
+
+void of_register_trusted_foundations(void)
+{
+	struct device_node *node;
+	struct trusted_foundations_platform_data pdata;
+	int err;
+
+	node = of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations");
+	if (!node)
+		return;
+
+	err = of_property_read_u32(node, "tlm,version-major",
+				   &pdata.version_major);
+	if (err != 0)
+		panic("Trusted Foundation: missing version-major property\n");
+	err = of_property_read_u32(node, "tlm,version-minor",
+				   &pdata.version_minor);
+	if (err != 0)
+		panic("Trusted Foundation: missing version-minor property\n");
+	register_trusted_foundations(&pdata);
+}
+
+bool trusted_foundations_registered(void)
+{
+	return firmware_ops == &trusted_foundations_ops;
+}
diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
new file mode 100644
index 000000000..0bef98858
--- /dev/null
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Turris Mox rWTM firmware driver
+ *
+ * Copyright (C) 2019 Marek Behun <marek.behun@nic.cz>
+ */
+
+#include <linux/armada-37xx-rwtm-mailbox.h>
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/dma-mapping.h>
+#include <linux/hw_random.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRIVER_NAME		"turris-mox-rwtm"
+
+/*
+ * The macros and constants below come from Turris Mox's rWTM firmware code.
+ * This firmware is open source and it's sources can be found at
+ * https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi.
+ */
+
+#define MBOX_STS_SUCCESS	(0 << 30)
+#define MBOX_STS_FAIL		(1 << 30)
+#define MBOX_STS_BADCMD		(2 << 30)
+#define MBOX_STS_ERROR(s)	((s) & (3 << 30))
+#define MBOX_STS_VALUE(s)	(((s) >> 10) & 0xfffff)
+#define MBOX_STS_CMD(s)		((s) & 0x3ff)
+
+enum mbox_cmd {
+	MBOX_CMD_GET_RANDOM	= 1,
+	MBOX_CMD_BOARD_INFO	= 2,
+	MBOX_CMD_ECDSA_PUB_KEY	= 3,
+	MBOX_CMD_HASH		= 4,
+	MBOX_CMD_SIGN		= 5,
+	MBOX_CMD_VERIFY		= 6,
+
+	MBOX_CMD_OTP_READ	= 7,
+	MBOX_CMD_OTP_WRITE	= 8,
+};
+
+struct mox_kobject;
+
+struct mox_rwtm {
+	struct device *dev;
+	struct mbox_client mbox_client;
+	struct mbox_chan *mbox;
+	struct mox_kobject *kobj;
+	struct hwrng hwrng;
+
+	struct armada_37xx_rwtm_rx_msg reply;
+
+	void *buf;
+	dma_addr_t buf_phys;
+
+	struct mutex busy;
+	struct completion cmd_done;
+
+	/* board information */
+	int has_board_info;
+	u64 serial_number;
+	int board_version, ram_size;
+	u8 mac_address1[6], mac_address2[6];
+
+	/* public key burned in eFuse */
+	int has_pubkey;
+	u8 pubkey[135];
+
+#ifdef CONFIG_DEBUG_FS
+	/*
+	 * Signature process. This is currently done via debugfs, because it
+	 * does not conform to the sysfs standard "one file per attribute".
+	 * It should be rewritten via crypto API once akcipher API is available
+	 * from userspace.
+	 */
+	struct dentry *debugfs_root;
+	u32 last_sig[34];
+	int last_sig_done;
+#endif
+};
+
+struct mox_kobject {
+	struct kobject kobj;
+	struct mox_rwtm *rwtm;
+};
+
+static inline struct kobject *rwtm_to_kobj(struct mox_rwtm *rwtm)
+{
+	return &rwtm->kobj->kobj;
+}
+
+static inline struct mox_rwtm *to_rwtm(struct kobject *kobj)
+{
+	return container_of(kobj, struct mox_kobject, kobj)->rwtm;
+}
+
+static void mox_kobj_release(struct kobject *kobj)
+{
+	kfree(to_rwtm(kobj)->kobj);
+}
+
+static struct kobj_type mox_kobj_ktype = {
+	.release	= mox_kobj_release,
+	.sysfs_ops	= &kobj_sysfs_ops,
+};
+
+static int mox_kobj_create(struct mox_rwtm *rwtm)
+{
+	rwtm->kobj = kzalloc(sizeof(*rwtm->kobj), GFP_KERNEL);
+	if (!rwtm->kobj)
+		return -ENOMEM;
+
+	kobject_init(rwtm_to_kobj(rwtm), &mox_kobj_ktype);
+	if (kobject_add(rwtm_to_kobj(rwtm), firmware_kobj, "turris-mox-rwtm")) {
+		kobject_put(rwtm_to_kobj(rwtm));
+		return -ENXIO;
+	}
+
+	rwtm->kobj->rwtm = rwtm;
+
+	return 0;
+}
+
+#define MOX_ATTR_RO(name, format, cat)				\
+static ssize_t							\
+name##_show(struct kobject *kobj, struct kobj_attribute *a,	\
+	    char *buf)						\
+{								\
+	struct mox_rwtm *rwtm = to_rwtm(kobj);	\
+	if (!rwtm->has_##cat)					\
+		return -ENODATA;				\
+	return sprintf(buf, format, rwtm->name);		\
+}								\
+static struct kobj_attribute mox_attr_##name = __ATTR_RO(name)
+
+MOX_ATTR_RO(serial_number, "%016llX\n", board_info);
+MOX_ATTR_RO(board_version, "%i\n", board_info);
+MOX_ATTR_RO(ram_size, "%i\n", board_info);
+MOX_ATTR_RO(mac_address1, "%pM\n", board_info);
+MOX_ATTR_RO(mac_address2, "%pM\n", board_info);
+MOX_ATTR_RO(pubkey, "%s\n", pubkey);
+
+static int mox_get_status(enum mbox_cmd cmd, u32 retval)
+{
+	if (MBOX_STS_CMD(retval) != cmd)
+		return -EIO;
+	else if (MBOX_STS_ERROR(retval) == MBOX_STS_FAIL)
+		return -(int)MBOX_STS_VALUE(retval);
+	else if (MBOX_STS_ERROR(retval) == MBOX_STS_BADCMD)
+		return -ENOSYS;
+	else if (MBOX_STS_ERROR(retval) != MBOX_STS_SUCCESS)
+		return -EIO;
+	else
+		return MBOX_STS_VALUE(retval);
+}
+
+static const struct attribute *mox_rwtm_attrs[] = {
+	&mox_attr_serial_number.attr,
+	&mox_attr_board_version.attr,
+	&mox_attr_ram_size.attr,
+	&mox_attr_mac_address1.attr,
+	&mox_attr_mac_address2.attr,
+	&mox_attr_pubkey.attr,
+	NULL
+};
+
+static void mox_rwtm_rx_callback(struct mbox_client *cl, void *data)
+{
+	struct mox_rwtm *rwtm = dev_get_drvdata(cl->dev);
+	struct armada_37xx_rwtm_rx_msg *msg = data;
+
+	rwtm->reply = *msg;
+	complete(&rwtm->cmd_done);
+}
+
+static void reply_to_mac_addr(u8 *mac, u32 t1, u32 t2)
+{
+	mac[0] = t1 >> 8;
+	mac[1] = t1;
+	mac[2] = t2 >> 24;
+	mac[3] = t2 >> 16;
+	mac[4] = t2 >> 8;
+	mac[5] = t2;
+}
+
+static int mox_get_board_info(struct mox_rwtm *rwtm)
+{
+	struct armada_37xx_rwtm_tx_msg msg;
+	struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply;
+	int ret;
+
+	msg.command = MBOX_CMD_BOARD_INFO;
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+	if (ret < 0)
+		return ret;
+
+	ret = mox_get_status(MBOX_CMD_BOARD_INFO, reply->retval);
+	if (ret == -ENODATA) {
+		dev_warn(rwtm->dev,
+			 "Board does not have manufacturing information burned!\n");
+	} else if (ret == -ENOSYS) {
+		dev_notice(rwtm->dev,
+			   "Firmware does not support the BOARD_INFO command\n");
+	} else if (ret < 0) {
+		return ret;
+	} else {
+		rwtm->serial_number = reply->status[1];
+		rwtm->serial_number <<= 32;
+		rwtm->serial_number |= reply->status[0];
+		rwtm->board_version = reply->status[2];
+		rwtm->ram_size = reply->status[3];
+		reply_to_mac_addr(rwtm->mac_address1, reply->status[4],
+				  reply->status[5]);
+		reply_to_mac_addr(rwtm->mac_address2, reply->status[6],
+				  reply->status[7]);
+		rwtm->has_board_info = 1;
+
+		pr_info("Turris Mox serial number %016llX\n",
+			rwtm->serial_number);
+		pr_info("           board version %i\n", rwtm->board_version);
+		pr_info("           burned RAM size %i MiB\n", rwtm->ram_size);
+	}
+
+	msg.command = MBOX_CMD_ECDSA_PUB_KEY;
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+	if (ret < 0)
+		return ret;
+
+	ret = mox_get_status(MBOX_CMD_ECDSA_PUB_KEY, reply->retval);
+	if (ret == -ENODATA) {
+		dev_warn(rwtm->dev, "Board has no public key burned!\n");
+	} else if (ret == -ENOSYS) {
+		dev_notice(rwtm->dev,
+			   "Firmware does not support the ECDSA_PUB_KEY command\n");
+	} else if (ret < 0) {
+		return ret;
+	} else {
+		u32 *s = reply->status;
+
+		rwtm->has_pubkey = 1;
+		sprintf(rwtm->pubkey,
+			"%06x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x",
+			ret, s[0], s[1], s[2], s[3], s[4], s[5], s[6], s[7],
+			s[8], s[9], s[10], s[11], s[12], s[13], s[14], s[15]);
+	}
+
+	return 0;
+}
+
+static int check_get_random_support(struct mox_rwtm *rwtm)
+{
+	struct armada_37xx_rwtm_tx_msg msg;
+	int ret;
+
+	msg.command = MBOX_CMD_GET_RANDOM;
+	msg.args[0] = 1;
+	msg.args[1] = rwtm->buf_phys;
+	msg.args[2] = 4;
+
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		return ret;
+
+	ret = wait_for_completion_timeout(&rwtm->cmd_done, HZ / 2);
+	if (ret < 0)
+		return ret;
+
+	return mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
+}
+
+static int mox_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+	struct mox_rwtm *rwtm = (struct mox_rwtm *) rng->priv;
+	struct armada_37xx_rwtm_tx_msg msg;
+	int ret;
+
+	if (max > 4096)
+		max = 4096;
+
+	msg.command = MBOX_CMD_GET_RANDOM;
+	msg.args[0] = 1;
+	msg.args[1] = rwtm->buf_phys;
+	msg.args[2] = (max + 3) & ~3;
+
+	if (!wait) {
+		if (!mutex_trylock(&rwtm->busy))
+			return -EBUSY;
+	} else {
+		mutex_lock(&rwtm->busy);
+	}
+
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = wait_for_completion_interruptible(&rwtm->cmd_done);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = mox_get_status(MBOX_CMD_GET_RANDOM, rwtm->reply.retval);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	memcpy(data, rwtm->buf, max);
+	ret = max;
+
+unlock_mutex:
+	mutex_unlock(&rwtm->busy);
+	return ret;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int rwtm_debug_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t do_sign_read(struct file *file, char __user *buf, size_t len,
+			    loff_t *ppos)
+{
+	struct mox_rwtm *rwtm = file->private_data;
+	ssize_t ret;
+
+	/* only allow one read, of 136 bytes, from position 0 */
+	if (*ppos != 0)
+		return 0;
+
+	if (len < 136)
+		return -EINVAL;
+
+	if (!rwtm->last_sig_done)
+		return -ENODATA;
+
+	/* 2 arrays of 17 32-bit words are 136 bytes */
+	ret = simple_read_from_buffer(buf, len, ppos, rwtm->last_sig, 136);
+	rwtm->last_sig_done = 0;
+
+	return ret;
+}
+
+static ssize_t do_sign_write(struct file *file, const char __user *buf,
+			     size_t len, loff_t *ppos)
+{
+	struct mox_rwtm *rwtm = file->private_data;
+	struct armada_37xx_rwtm_rx_msg *reply = &rwtm->reply;
+	struct armada_37xx_rwtm_tx_msg msg;
+	loff_t dummy = 0;
+	ssize_t ret;
+
+	/* the input is a SHA-512 hash, so exactly 64 bytes have to be read */
+	if (len != 64)
+		return -EINVAL;
+
+	/* if last result is not zero user has not read that information yet */
+	if (rwtm->last_sig_done)
+		return -EBUSY;
+
+	if (!mutex_trylock(&rwtm->busy))
+		return -EBUSY;
+
+	/*
+	 * Here we have to send:
+	 *   1. Address of the input to sign.
+	 *      The input is an array of 17 32-bit words, the first (most
+	 *      significat) is 0, the rest 16 words are copied from the SHA-512
+	 *      hash given by the user and converted from BE to LE.
+	 *   2. Address of the buffer where ECDSA signature value R shall be
+	 *      stored by the rWTM firmware.
+	 *   3. Address of the buffer where ECDSA signature value S shall be
+	 *      stored by the rWTM firmware.
+	 */
+	memset(rwtm->buf, 0, 4);
+	ret = simple_write_to_buffer(rwtm->buf + 4, 64, &dummy, buf, len);
+	if (ret < 0)
+		goto unlock_mutex;
+	be32_to_cpu_array(rwtm->buf, rwtm->buf, 17);
+
+	msg.command = MBOX_CMD_SIGN;
+	msg.args[0] = 1;
+	msg.args[1] = rwtm->buf_phys;
+	msg.args[2] = rwtm->buf_phys + 68;
+	msg.args[3] = rwtm->buf_phys + 2 * 68;
+	ret = mbox_send_message(rwtm->mbox, &msg);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = wait_for_completion_interruptible(&rwtm->cmd_done);
+	if (ret < 0)
+		goto unlock_mutex;
+
+	ret = MBOX_STS_VALUE(reply->retval);
+	if (MBOX_STS_ERROR(reply->retval) != MBOX_STS_SUCCESS)
+		goto unlock_mutex;
+
+	/*
+	 * Here we read the R and S values of the ECDSA signature
+	 * computed by the rWTM firmware and convert their words from
+	 * LE to BE.
+	 */
+	memcpy(rwtm->last_sig, rwtm->buf + 68, 136);
+	cpu_to_be32_array(rwtm->last_sig, rwtm->last_sig, 34);
+	rwtm->last_sig_done = 1;
+
+	mutex_unlock(&rwtm->busy);
+	return len;
+unlock_mutex:
+	mutex_unlock(&rwtm->busy);
+	return ret;
+}
+
+static const struct file_operations do_sign_fops = {
+	.owner	= THIS_MODULE,
+	.open	= rwtm_debug_open,
+	.read	= do_sign_read,
+	.write	= do_sign_write,
+	.llseek	= no_llseek,
+};
+
+static int rwtm_register_debugfs(struct mox_rwtm *rwtm)
+{
+	struct dentry *root, *entry;
+
+	root = debugfs_create_dir("turris-mox-rwtm", NULL);
+
+	if (IS_ERR(root))
+		return PTR_ERR(root);
+
+	entry = debugfs_create_file_unsafe("do_sign", 0600, root, rwtm,
+					   &do_sign_fops);
+	if (IS_ERR(entry))
+		goto err_remove;
+
+	rwtm->debugfs_root = root;
+
+	return 0;
+err_remove:
+	debugfs_remove_recursive(root);
+	return PTR_ERR(entry);
+}
+
+static void rwtm_unregister_debugfs(struct mox_rwtm *rwtm)
+{
+	debugfs_remove_recursive(rwtm->debugfs_root);
+}
+#else
+static inline int rwtm_register_debugfs(struct mox_rwtm *rwtm)
+{
+	return 0;
+}
+
+static inline void rwtm_unregister_debugfs(struct mox_rwtm *rwtm)
+{
+}
+#endif
+
+static int turris_mox_rwtm_probe(struct platform_device *pdev)
+{
+	struct mox_rwtm *rwtm;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	rwtm = devm_kzalloc(dev, sizeof(*rwtm), GFP_KERNEL);
+	if (!rwtm)
+		return -ENOMEM;
+
+	rwtm->dev = dev;
+	rwtm->buf = dmam_alloc_coherent(dev, PAGE_SIZE, &rwtm->buf_phys,
+					GFP_KERNEL);
+	if (!rwtm->buf)
+		return -ENOMEM;
+
+	ret = mox_kobj_create(rwtm);
+	if (ret < 0) {
+		dev_err(dev, "Cannot create turris-mox-rwtm kobject!\n");
+		return ret;
+	}
+
+	ret = sysfs_create_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+	if (ret < 0) {
+		dev_err(dev, "Cannot create sysfs files!\n");
+		goto put_kobj;
+	}
+
+	platform_set_drvdata(pdev, rwtm);
+
+	mutex_init(&rwtm->busy);
+
+	rwtm->mbox_client.dev = dev;
+	rwtm->mbox_client.rx_callback = mox_rwtm_rx_callback;
+
+	rwtm->mbox = mbox_request_channel(&rwtm->mbox_client, 0);
+	if (IS_ERR(rwtm->mbox)) {
+		ret = PTR_ERR(rwtm->mbox);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Cannot request mailbox channel: %i\n",
+				ret);
+		goto remove_files;
+	}
+
+	init_completion(&rwtm->cmd_done);
+
+	ret = mox_get_board_info(rwtm);
+	if (ret < 0)
+		dev_warn(dev, "Cannot read board information: %i\n", ret);
+
+	ret = check_get_random_support(rwtm);
+	if (ret < 0) {
+		dev_notice(dev,
+			   "Firmware does not support the GET_RANDOM command\n");
+		goto free_channel;
+	}
+
+	rwtm->hwrng.name = DRIVER_NAME "_hwrng";
+	rwtm->hwrng.read = mox_hwrng_read;
+	rwtm->hwrng.priv = (unsigned long) rwtm;
+	rwtm->hwrng.quality = 1024;
+
+	ret = devm_hwrng_register(dev, &rwtm->hwrng);
+	if (ret < 0) {
+		dev_err(dev, "Cannot register HWRNG: %i\n", ret);
+		goto free_channel;
+	}
+
+	ret = rwtm_register_debugfs(rwtm);
+	if (ret < 0) {
+		dev_err(dev, "Failed creating debugfs entries: %i\n", ret);
+		goto free_channel;
+	}
+
+	dev_info(dev, "HWRNG successfully registered\n");
+
+	return 0;
+
+free_channel:
+	mbox_free_channel(rwtm->mbox);
+remove_files:
+	sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+put_kobj:
+	kobject_put(rwtm_to_kobj(rwtm));
+	return ret;
+}
+
+static int turris_mox_rwtm_remove(struct platform_device *pdev)
+{
+	struct mox_rwtm *rwtm = platform_get_drvdata(pdev);
+
+	rwtm_unregister_debugfs(rwtm);
+	sysfs_remove_files(rwtm_to_kobj(rwtm), mox_rwtm_attrs);
+	kobject_put(rwtm_to_kobj(rwtm));
+	mbox_free_channel(rwtm->mbox);
+
+	return 0;
+}
+
+static const struct of_device_id turris_mox_rwtm_match[] = {
+	{ .compatible = "cznic,turris-mox-rwtm", },
+	{ .compatible = "marvell,armada-3700-rwtm-firmware", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, turris_mox_rwtm_match);
+
+static struct platform_driver turris_mox_rwtm_driver = {
+	.probe	= turris_mox_rwtm_probe,
+	.remove	= turris_mox_rwtm_remove,
+	.driver	= {
+		.name		= DRIVER_NAME,
+		.of_match_table	= turris_mox_rwtm_match,
+	},
+};
+module_platform_driver(turris_mox_rwtm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Turris Mox rWTM firmware driver");
+MODULE_AUTHOR("Marek Behun <marek.behun@nic.cz>");
diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig
new file mode 100644
index 000000000..9a9bd1908
--- /dev/null
+++ b/drivers/firmware/xilinx/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+# Kconfig for Xilinx firmwares
+
+menu "Zynq MPSoC Firmware Drivers"
+	depends on ARCH_ZYNQMP
+
+config ZYNQMP_FIRMWARE
+	bool "Enable Xilinx Zynq MPSoC firmware interface"
+	depends on ARCH_ZYNQMP
+	default y if ARCH_ZYNQMP
+	select MFD_CORE
+	help
+	  Firmware interface driver is used by different
+	  drivers to communicate with the firmware for
+	  various platform management services.
+	  Say yes to enable ZynqMP firmware interface driver.
+	  If in doubt, say N.
+
+config ZYNQMP_FIRMWARE_DEBUG
+	bool "Enable Xilinx Zynq MPSoC firmware debug APIs"
+	depends on ZYNQMP_FIRMWARE && DEBUG_FS
+	help
+	  Say yes to enable ZynqMP firmware interface debug APIs.
+	  If in doubt, say N.
+
+endmenu
diff --git a/drivers/firmware/xilinx/Makefile b/drivers/firmware/xilinx/Makefile
new file mode 100644
index 000000000..875a53703
--- /dev/null
+++ b/drivers/firmware/xilinx/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for Xilinx firmwares
+
+obj-$(CONFIG_ZYNQMP_FIRMWARE) += zynqmp.o
+obj-$(CONFIG_ZYNQMP_FIRMWARE_DEBUG) += zynqmp-debug.o
diff --git a/drivers/firmware/xilinx/zynqmp-debug.c b/drivers/firmware/xilinx/zynqmp-debug.c
new file mode 100644
index 000000000..99606b349
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp-debug.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware layer for debugfs APIs
+ *
+ *  Copyright (C) 2014-2018 Xilinx, Inc.
+ *
+ *  Michal Simek <michal.simek@xilinx.com>
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include "zynqmp-debug.h"
+
+#define PM_API_NAME_LEN			50
+
+struct pm_api_info {
+	u32 api_id;
+	char api_name[PM_API_NAME_LEN];
+	char api_name_len;
+};
+
+static char debugfs_buf[PAGE_SIZE];
+
+#define PM_API(id)		 {id, #id, strlen(#id)}
+static struct pm_api_info pm_api_list[] = {
+	PM_API(PM_GET_API_VERSION),
+	PM_API(PM_QUERY_DATA),
+};
+
+static struct dentry *firmware_debugfs_root;
+
+/**
+ * zynqmp_pm_argument_value() - Extract argument value from a PM-API request
+ * @arg:	Entered PM-API argument in string format
+ *
+ * Return: Argument value in unsigned integer format on success
+ *	   0 otherwise
+ */
+static u64 zynqmp_pm_argument_value(char *arg)
+{
+	u64 value;
+
+	if (!arg)
+		return 0;
+
+	if (!kstrtou64(arg, 0, &value))
+		return value;
+
+	return 0;
+}
+
+/**
+ * get_pm_api_id() - Extract API-ID from a PM-API request
+ * @pm_api_req:		Entered PM-API argument in string format
+ * @pm_id:		API-ID
+ *
+ * Return: 0 on success else error code
+ */
+static int get_pm_api_id(char *pm_api_req, u32 *pm_id)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pm_api_list) ; i++) {
+		if (!strncasecmp(pm_api_req, pm_api_list[i].api_name,
+				 pm_api_list[i].api_name_len)) {
+			*pm_id = pm_api_list[i].api_id;
+			break;
+		}
+	}
+
+	/* If no name was entered look for PM-API ID instead */
+	if (i == ARRAY_SIZE(pm_api_list) && kstrtouint(pm_api_req, 10, pm_id))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int process_api_request(u32 pm_id, u64 *pm_api_arg, u32 *pm_api_ret)
+{
+	u32 pm_api_version;
+	int ret;
+	struct zynqmp_pm_query_data qdata = {0};
+
+	switch (pm_id) {
+	case PM_GET_API_VERSION:
+		ret = zynqmp_pm_get_api_version(&pm_api_version);
+		sprintf(debugfs_buf, "PM-API Version = %d.%d\n",
+			pm_api_version >> 16, pm_api_version & 0xffff);
+		break;
+	case PM_QUERY_DATA:
+		qdata.qid = pm_api_arg[0];
+		qdata.arg1 = pm_api_arg[1];
+		qdata.arg2 = pm_api_arg[2];
+		qdata.arg3 = pm_api_arg[3];
+
+		ret = zynqmp_pm_query_data(qdata, pm_api_ret);
+		if (ret)
+			break;
+
+		switch (qdata.qid) {
+		case PM_QID_CLOCK_GET_NAME:
+			sprintf(debugfs_buf, "Clock name = %s\n",
+				(char *)pm_api_ret);
+			break;
+		case PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS:
+			sprintf(debugfs_buf, "Multiplier = %d, Divider = %d\n",
+				pm_api_ret[1], pm_api_ret[2]);
+			break;
+		default:
+			sprintf(debugfs_buf,
+				"data[0] = 0x%08x\ndata[1] = 0x%08x\n data[2] = 0x%08x\ndata[3] = 0x%08x\n",
+				pm_api_ret[0], pm_api_ret[1],
+				pm_api_ret[2], pm_api_ret[3]);
+		}
+		break;
+	default:
+		sprintf(debugfs_buf, "Unsupported PM-API request\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_debugfs_api_write() - debugfs write function
+ * @file:	User file
+ * @ptr:	User entered PM-API string
+ * @len:	Length of the userspace buffer
+ * @off:	Offset within the file
+ *
+ * Used for triggering pm api functions by writing
+ * echo <pm_api_id>	> /sys/kernel/debug/zynqmp_pm/power or
+ * echo <pm_api_name>	> /sys/kernel/debug/zynqmp_pm/power
+ *
+ * Return: Number of bytes copied if PM-API request succeeds,
+ *	   the corresponding error code otherwise
+ */
+static ssize_t zynqmp_pm_debugfs_api_write(struct file *file,
+					   const char __user *ptr, size_t len,
+					   loff_t *off)
+{
+	char *kern_buff, *tmp_buff;
+	char *pm_api_req;
+	u32 pm_id = 0;
+	u64 pm_api_arg[4] = {0, 0, 0, 0};
+	/* Return values from PM APIs calls */
+	u32 pm_api_ret[4] = {0, 0, 0, 0};
+
+	int ret;
+	int i = 0;
+
+	strcpy(debugfs_buf, "");
+
+	if (*off != 0 || len <= 1 || len > PAGE_SIZE - 1)
+		return -EINVAL;
+
+	kern_buff = memdup_user_nul(ptr, len);
+	if (IS_ERR(kern_buff))
+		return PTR_ERR(kern_buff);
+	tmp_buff = kern_buff;
+
+	/* Read the API name from a user request */
+	pm_api_req = strsep(&kern_buff, " ");
+
+	ret = get_pm_api_id(pm_api_req, &pm_id);
+	if (ret < 0)
+		goto err;
+
+	/* Read node_id and arguments from the PM-API request */
+	pm_api_req = strsep(&kern_buff, " ");
+	while ((i < ARRAY_SIZE(pm_api_arg)) && pm_api_req) {
+		pm_api_arg[i++] = zynqmp_pm_argument_value(pm_api_req);
+		pm_api_req = strsep(&kern_buff, " ");
+	}
+
+	ret = process_api_request(pm_id, pm_api_arg, pm_api_ret);
+
+err:
+	kfree(tmp_buff);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+/**
+ * zynqmp_pm_debugfs_api_read() - debugfs read function
+ * @file:	User file
+ * @ptr:	Requested pm_api_version string
+ * @len:	Length of the userspace buffer
+ * @off:	Offset within the file
+ *
+ * Return: Length of the version string on success
+ *	   else error code
+ */
+static ssize_t zynqmp_pm_debugfs_api_read(struct file *file, char __user *ptr,
+					  size_t len, loff_t *off)
+{
+	return simple_read_from_buffer(ptr, len, off, debugfs_buf,
+				       strlen(debugfs_buf));
+}
+
+/* Setup debugfs fops */
+static const struct file_operations fops_zynqmp_pm_dbgfs = {
+	.owner = THIS_MODULE,
+	.write = zynqmp_pm_debugfs_api_write,
+	.read = zynqmp_pm_debugfs_api_read,
+};
+
+/**
+ * zynqmp_pm_api_debugfs_init - Initialize debugfs interface
+ *
+ * Return:	None
+ */
+void zynqmp_pm_api_debugfs_init(void)
+{
+	/* Initialize debugfs interface */
+	firmware_debugfs_root = debugfs_create_dir("zynqmp-firmware", NULL);
+	debugfs_create_file("pm", 0660, firmware_debugfs_root, NULL,
+			    &fops_zynqmp_pm_dbgfs);
+}
+
+/**
+ * zynqmp_pm_api_debugfs_exit - Remove debugfs interface
+ *
+ * Return:	None
+ */
+void zynqmp_pm_api_debugfs_exit(void)
+{
+	debugfs_remove_recursive(firmware_debugfs_root);
+}
diff --git a/drivers/firmware/xilinx/zynqmp-debug.h b/drivers/firmware/xilinx/zynqmp-debug.h
new file mode 100644
index 000000000..9929f8b43
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp-debug.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ *  Copyright (C) 2014-2018 Xilinx
+ *
+ *  Michal Simek <michal.simek@xilinx.com>
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#ifndef __FIRMWARE_ZYNQMP_DEBUG_H__
+#define __FIRMWARE_ZYNQMP_DEBUG_H__
+
+#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE_DEBUG)
+void zynqmp_pm_api_debugfs_init(void);
+void zynqmp_pm_api_debugfs_exit(void);
+#else
+static inline void zynqmp_pm_api_debugfs_init(void) { }
+static inline void zynqmp_pm_api_debugfs_exit(void) { }
+#endif
+
+#endif /* __FIRMWARE_ZYNQMP_DEBUG_H__ */
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
new file mode 100644
index 000000000..300ba2991
--- /dev/null
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -0,0 +1,1313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx Zynq MPSoC Firmware layer
+ *
+ *  Copyright (C) 2014-2021 Xilinx, Inc.
+ *
+ *  Michal Simek <michal.simek@xilinx.com>
+ *  Davorin Mista <davorin.mista@aggios.com>
+ *  Jolly Shah <jollys@xilinx.com>
+ *  Rajan Vaja <rajanv@xilinx.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/hashtable.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+#include "zynqmp-debug.h"
+
+/* Max HashMap Order for PM API feature check (1<<7 = 128) */
+#define PM_API_FEATURE_CHECK_MAX_ORDER  7
+
+static bool feature_check_enabled;
+static DEFINE_HASHTABLE(pm_api_features_map, PM_API_FEATURE_CHECK_MAX_ORDER);
+
+/**
+ * struct pm_api_feature_data - PM API Feature data
+ * @pm_api_id:		PM API Id, used as key to index into hashmap
+ * @feature_status:	status of PM API feature: valid, invalid
+ * @hentry:		hlist_node that hooks this entry into hashtable
+ */
+struct pm_api_feature_data {
+	u32 pm_api_id;
+	int feature_status;
+	struct hlist_node hentry;
+};
+
+static const struct mfd_cell firmware_devs[] = {
+	{
+		.name = "zynqmp_power_controller",
+	},
+};
+
+/**
+ * zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
+ * @ret_status:		PMUFW return code
+ *
+ * Return: corresponding Linux error code
+ */
+static int zynqmp_pm_ret_code(u32 ret_status)
+{
+	switch (ret_status) {
+	case XST_PM_SUCCESS:
+	case XST_PM_DOUBLE_REQ:
+		return 0;
+	case XST_PM_NO_FEATURE:
+		return -ENOTSUPP;
+	case XST_PM_NO_ACCESS:
+		return -EACCES;
+	case XST_PM_ABORT_SUSPEND:
+		return -ECANCELED;
+	case XST_PM_MULT_USER:
+		return -EUSERS;
+	case XST_PM_INTERNAL:
+	case XST_PM_CONFLICT:
+	case XST_PM_INVALID_NODE:
+	default:
+		return -EINVAL;
+	}
+}
+
+static noinline int do_fw_call_fail(u64 arg0, u64 arg1, u64 arg2,
+				    u32 *ret_payload)
+{
+	return -ENODEV;
+}
+
+/*
+ * PM function call wrapper
+ * Invoke do_fw_call_smc or do_fw_call_hvc, depending on the configuration
+ */
+static int (*do_fw_call)(u64, u64, u64, u32 *ret_payload) = do_fw_call_fail;
+
+/**
+ * do_fw_call_smc() - Call system-level platform management layer (SMC)
+ * @arg0:		Argument 0 to SMC call
+ * @arg1:		Argument 1 to SMC call
+ * @arg2:		Argument 2 to SMC call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function via SMC call (no hypervisor present).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_smc(u64 arg0, u64 arg1, u64 arg2,
+				   u32 *ret_payload)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+	if (ret_payload) {
+		ret_payload[0] = lower_32_bits(res.a0);
+		ret_payload[1] = upper_32_bits(res.a0);
+		ret_payload[2] = lower_32_bits(res.a1);
+		ret_payload[3] = upper_32_bits(res.a1);
+	}
+
+	return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * do_fw_call_hvc() - Call system-level platform management layer (HVC)
+ * @arg0:		Argument 0 to HVC call
+ * @arg1:		Argument 1 to HVC call
+ * @arg2:		Argument 2 to HVC call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function via HVC
+ * HVC-based for communication through hypervisor
+ * (no direct communication with ATF).
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static noinline int do_fw_call_hvc(u64 arg0, u64 arg1, u64 arg2,
+				   u32 *ret_payload)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_hvc(arg0, arg1, arg2, 0, 0, 0, 0, 0, &res);
+
+	if (ret_payload) {
+		ret_payload[0] = lower_32_bits(res.a0);
+		ret_payload[1] = upper_32_bits(res.a0);
+		ret_payload[2] = lower_32_bits(res.a1);
+		ret_payload[3] = upper_32_bits(res.a1);
+	}
+
+	return zynqmp_pm_ret_code((enum pm_ret_status)res.a0);
+}
+
+/**
+ * zynqmp_pm_feature() - Check weather given feature is supported or not
+ * @api_id:		API ID to check
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_feature(u32 api_id)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	u64 smc_arg[2];
+	struct pm_api_feature_data *feature_data;
+
+	if (!feature_check_enabled)
+		return 0;
+
+	/* Check for existing entry in hash table for given api */
+	hash_for_each_possible(pm_api_features_map, feature_data, hentry,
+			       api_id) {
+		if (feature_data->pm_api_id == api_id)
+			return feature_data->feature_status;
+	}
+
+	/* Add new entry if not present */
+	feature_data = kmalloc(sizeof(*feature_data), GFP_ATOMIC);
+	if (!feature_data)
+		return -ENOMEM;
+
+	feature_data->pm_api_id = api_id;
+	smc_arg[0] = PM_SIP_SVC | PM_FEATURE_CHECK;
+	smc_arg[1] = api_id;
+
+	ret = do_fw_call(smc_arg[0], smc_arg[1], 0, ret_payload);
+	if (ret)
+		ret = -EOPNOTSUPP;
+	else
+		ret = ret_payload[1];
+
+	feature_data->feature_status = ret;
+	hash_add(pm_api_features_map, &feature_data->hentry, api_id);
+
+	return ret;
+}
+
+/**
+ * zynqmp_pm_invoke_fn() - Invoke the system-level platform management layer
+ *			   caller function depending on the configuration
+ * @pm_api_id:		Requested PM-API call
+ * @arg0:		Argument 0 to requested PM-API call
+ * @arg1:		Argument 1 to requested PM-API call
+ * @arg2:		Argument 2 to requested PM-API call
+ * @arg3:		Argument 3 to requested PM-API call
+ * @ret_payload:	Returned value array
+ *
+ * Invoke platform management function for SMC or HVC call, depending on
+ * configuration.
+ * Following SMC Calling Convention (SMCCC) for SMC64:
+ * Pm Function Identifier,
+ * PM_SIP_SVC + PM_API_ID =
+ *	((SMC_TYPE_FAST << FUNCID_TYPE_SHIFT)
+ *	((SMC_64) << FUNCID_CC_SHIFT)
+ *	((SIP_START) << FUNCID_OEN_SHIFT)
+ *	((PM_API_ID) & FUNCID_NUM_MASK))
+ *
+ * PM_SIP_SVC	- Registered ZynqMP SIP Service Call.
+ * PM_API_ID	- Platform Management API ID.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
+			u32 arg2, u32 arg3, u32 *ret_payload)
+{
+	/*
+	 * Added SIP service call Function Identifier
+	 * Make sure to stay in x0 register
+	 */
+	u64 smc_arg[4];
+	int ret;
+
+	/* Check if feature is supported or not */
+	ret = zynqmp_pm_feature(pm_api_id);
+	if (ret < 0)
+		return ret;
+
+	smc_arg[0] = PM_SIP_SVC | pm_api_id;
+	smc_arg[1] = ((u64)arg1 << 32) | arg0;
+	smc_arg[2] = ((u64)arg3 << 32) | arg2;
+
+	return do_fw_call(smc_arg[0], smc_arg[1], smc_arg[2], ret_payload);
+}
+
+static u32 pm_api_version;
+static u32 pm_tz_version;
+
+/**
+ * zynqmp_pm_get_api_version() - Get version number of PMU PM firmware
+ * @version:	Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_api_version(u32 *version)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!version)
+		return -EINVAL;
+
+	/* Check is PM API version already verified */
+	if (pm_api_version > 0) {
+		*version = pm_api_version;
+		return 0;
+	}
+	ret = zynqmp_pm_invoke_fn(PM_GET_API_VERSION, 0, 0, 0, 0, ret_payload);
+	*version = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_api_version);
+
+/**
+ * zynqmp_pm_get_chipid - Get silicon ID registers
+ * @idcode:     IDCODE register
+ * @version:    version register
+ *
+ * Return:      Returns the status of the operation and the idcode and version
+ *              registers in @idcode and @version.
+ */
+int zynqmp_pm_get_chipid(u32 *idcode, u32 *version)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!idcode || !version)
+		return -EINVAL;
+
+	ret = zynqmp_pm_invoke_fn(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
+	*idcode = ret_payload[1];
+	*version = ret_payload[2];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_chipid);
+
+/**
+ * zynqmp_pm_get_trustzone_version() - Get secure trustzone firmware version
+ * @version:	Returned version value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_get_trustzone_version(u32 *version)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!version)
+		return -EINVAL;
+
+	/* Check is PM trustzone version already verified */
+	if (pm_tz_version > 0) {
+		*version = pm_tz_version;
+		return 0;
+	}
+	ret = zynqmp_pm_invoke_fn(PM_GET_TRUSTZONE_VERSION, 0, 0,
+				  0, 0, ret_payload);
+	*version = ret_payload[1];
+
+	return ret;
+}
+
+/**
+ * get_set_conduit_method() - Choose SMC or HVC based communication
+ * @np:		Pointer to the device_node structure
+ *
+ * Use SMC or HVC-based functions to communicate with EL2/EL3.
+ *
+ * Return: Returns 0 on success or error code
+ */
+static int get_set_conduit_method(struct device_node *np)
+{
+	const char *method;
+
+	if (of_property_read_string(np, "method", &method)) {
+		pr_warn("%s missing \"method\" property\n", __func__);
+		return -ENXIO;
+	}
+
+	if (!strcmp("hvc", method)) {
+		do_fw_call = do_fw_call_hvc;
+	} else if (!strcmp("smc", method)) {
+		do_fw_call = do_fw_call_smc;
+	} else {
+		pr_warn("%s Invalid \"method\" property: %s\n",
+			__func__, method);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * zynqmp_pm_query_data() - Get query data from firmware
+ * @qdata:	Variable to the zynqmp_pm_query_data structure
+ * @out:	Returned output value
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_query_data(struct zynqmp_pm_query_data qdata, u32 *out)
+{
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_QUERY_DATA, qdata.qid, qdata.arg1,
+				  qdata.arg2, qdata.arg3, out);
+
+	/*
+	 * For clock name query, all bytes in SMC response are clock name
+	 * characters and return code is always success. For invalid clocks,
+	 * clock name bytes would be zeros.
+	 */
+	return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_query_data);
+
+/**
+ * zynqmp_pm_clock_enable() - Enable the clock for given id
+ * @clock_id:	ID of the clock to be enabled
+ *
+ * This function is used by master to enable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_enable(u32 clock_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_ENABLE, clock_id, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_enable);
+
+/**
+ * zynqmp_pm_clock_disable() - Disable the clock for given id
+ * @clock_id:	ID of the clock to be disable
+ *
+ * This function is used by master to disable the clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_disable(u32 clock_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_DISABLE, clock_id, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_disable);
+
+/**
+ * zynqmp_pm_clock_getstate() - Get the clock state for given id
+ * @clock_id:	ID of the clock to be queried
+ * @state:	1/0 (Enabled/Disabled)
+ *
+ * This function is used by master to get the state of clock
+ * including peripherals and PLL clocks.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getstate(u32 clock_id, u32 *state)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETSTATE, clock_id, 0,
+				  0, 0, ret_payload);
+	*state = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getstate);
+
+/**
+ * zynqmp_pm_clock_setdivider() - Set the clock divider for given id
+ * @clock_id:	ID of the clock
+ * @divider:	divider value
+ *
+ * This function is used by master to set divider for any clock
+ * to achieve desired rate.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setdivider(u32 clock_id, u32 divider)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETDIVIDER, clock_id, divider,
+				   0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setdivider);
+
+/**
+ * zynqmp_pm_clock_getdivider() - Get the clock divider for given id
+ * @clock_id:	ID of the clock
+ * @divider:	divider value
+ *
+ * This function is used by master to get divider values
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getdivider(u32 clock_id, u32 *divider)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETDIVIDER, clock_id, 0,
+				  0, 0, ret_payload);
+	*divider = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getdivider);
+
+/**
+ * zynqmp_pm_clock_setrate() - Set the clock rate for given id
+ * @clock_id:	ID of the clock
+ * @rate:	rate value in hz
+ *
+ * This function is used by master to set rate for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setrate(u32 clock_id, u64 rate)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETRATE, clock_id,
+				   lower_32_bits(rate),
+				   upper_32_bits(rate),
+				   0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setrate);
+
+/**
+ * zynqmp_pm_clock_getrate() - Get the clock rate for given id
+ * @clock_id:	ID of the clock
+ * @rate:	rate value in hz
+ *
+ * This function is used by master to get rate
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getrate(u32 clock_id, u64 *rate)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETRATE, clock_id, 0,
+				  0, 0, ret_payload);
+	*rate = ((u64)ret_payload[2] << 32) | ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getrate);
+
+/**
+ * zynqmp_pm_clock_setparent() - Set the clock parent for given id
+ * @clock_id:	ID of the clock
+ * @parent_id:	parent id
+ *
+ * This function is used by master to set parent for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_setparent(u32 clock_id, u32 parent_id)
+{
+	return zynqmp_pm_invoke_fn(PM_CLOCK_SETPARENT, clock_id,
+				   parent_id, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_setparent);
+
+/**
+ * zynqmp_pm_clock_getparent() - Get the clock parent for given id
+ * @clock_id:	ID of the clock
+ * @parent_id:	parent id
+ *
+ * This function is used by master to get parent index
+ * for any clock.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_CLOCK_GETPARENT, clock_id, 0,
+				  0, 0, ret_payload);
+	*parent_id = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clock_getparent);
+
+/**
+ * zynqmp_pm_set_pll_frac_mode() - PM API for set PLL mode
+ *
+ * @clk_id:	PLL clock ID
+ * @mode:	PLL mode (PLL_MODE_FRAC/PLL_MODE_INT)
+ *
+ * This function sets PLL mode
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_pll_frac_mode(u32 clk_id, u32 mode)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_MODE,
+				   clk_id, mode, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_mode);
+
+/**
+ * zynqmp_pm_get_pll_frac_mode() - PM API for get PLL mode
+ *
+ * @clk_id:	PLL clock ID
+ * @mode:	PLL mode
+ *
+ * This function return current PLL mode
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_pll_frac_mode(u32 clk_id, u32 *mode)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_MODE,
+				   clk_id, 0, mode);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_mode);
+
+/**
+ * zynqmp_pm_set_pll_frac_data() - PM API for setting pll fraction data
+ *
+ * @clk_id:	PLL clock ID
+ * @data:	fraction data
+ *
+ * This function sets fraction data.
+ * It is valid for fraction mode only.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_pll_frac_data(u32 clk_id, u32 data)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_PLL_FRAC_DATA,
+				   clk_id, data, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_pll_frac_data);
+
+/**
+ * zynqmp_pm_get_pll_frac_data() - PM API for getting pll fraction data
+ *
+ * @clk_id:	PLL clock ID
+ * @data:	fraction data
+ *
+ * This function returns fraction data value.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_get_pll_frac_data(u32 clk_id, u32 *data)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_GET_PLL_FRAC_DATA,
+				   clk_id, 0, data);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
+
+/**
+ * zynqmp_pm_set_sd_tapdelay() -  Set tap delay for the SD device
+ *
+ * @node_id	Node ID of the device
+ * @type	Type of tap delay to set (input/output)
+ * @value	Value to set fot the tap delay
+ *
+ * This function sets input/output tap delay for the SD device.
+ *
+ * @return	Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
+				   type, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
+
+/**
+ * zynqmp_pm_sd_dll_reset() - Reset DLL logic
+ *
+ * @node_id	Node ID of the device
+ * @type	Reset type
+ *
+ * This function resets DLL logic for the SD device.
+ *
+ * @return	Returns status, either success or error+reason
+ */
+int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SD_DLL_RESET,
+				   type, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
+
+/**
+ * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
+ * @index	GGS register index
+ * @value	Register value to be written
+ *
+ * This function writes value to GGS register.
+ *
+ * @return      Returns status, either success or error+reason
+ */
+int zynqmp_pm_write_ggs(u32 index, u32 value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_GGS,
+				   index, value, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
+
+/**
+ * zynqmp_pm_write_ggs() - PM API for reading global general storage (ggs)
+ * @index	GGS register index
+ * @value	Register value to be written
+ *
+ * This function returns GGS register value.
+ *
+ * @return      Returns status, either success or error+reason
+ */
+int zynqmp_pm_read_ggs(u32 index, u32 *value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_GGS,
+				   index, 0, value);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
+
+/**
+ * zynqmp_pm_write_pggs() - PM API for writing persistent global general
+ *			     storage (pggs)
+ * @index	PGGS register index
+ * @value	Register value to be written
+ *
+ * This function writes value to PGGS register.
+ *
+ * @return      Returns status, either success or error+reason
+ */
+int zynqmp_pm_write_pggs(u32 index, u32 value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_WRITE_PGGS, index, value,
+				   NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
+
+/**
+ * zynqmp_pm_write_pggs() - PM API for reading persistent global general
+ *			     storage (pggs)
+ * @index	PGGS register index
+ * @value	Register value to be written
+ *
+ * This function returns PGGS register value.
+ *
+ * @return      Returns status, either success or error+reason
+ */
+int zynqmp_pm_read_pggs(u32 index, u32 *value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_READ_PGGS, index, 0,
+				   value);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
+
+/**
+ * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
+ * @value	Status value to be written
+ *
+ * This function sets healthy bit value to indicate boot health status
+ * to firmware.
+ *
+ * @return      Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_boot_health_status(u32 value)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_SET_BOOT_HEALTH_STATUS,
+				   value, 0, NULL);
+}
+
+/**
+ * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
+ * @reset:		Reset to be configured
+ * @assert_flag:	Flag stating should reset be asserted (1) or
+ *			released (0)
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
+			   const enum zynqmp_pm_reset_action assert_flag)
+{
+	return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
+				   0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_reset_assert);
+
+/**
+ * zynqmp_pm_reset_get_status - Get status of the reset
+ * @reset:      Reset whose status should be returned
+ * @status:     Returned status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset, u32 *status)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!status)
+		return -EINVAL;
+
+	ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
+				  0, 0, ret_payload);
+	*status = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_reset_get_status);
+
+/**
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address:	Address to write to
+ * @size:	pl bitstream size
+ * @flags:	Bitstream type
+ *	-XILINX_ZYNQMP_PM_FPGA_FULL:  FPGA full reconfiguration
+ *	-XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_fpga_load(const u64 address, const u32 size, const u32 flags)
+{
+	return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+				   upper_32_bits(address), size, flags, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_load);
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the pmufw to get the PCAP
+ * status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_fpga_get_status(u32 *value)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!value)
+		return -EINVAL;
+
+	ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+	*value = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
+
+/**
+ * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
+ *			       master has initialized its own power management
+ *
+ * This API function is to be used for notify the power management controller
+ * about the completed power management initialization.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_init_finalize(void)
+{
+	return zynqmp_pm_invoke_fn(PM_PM_INIT_FINALIZE, 0, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_init_finalize);
+
+/**
+ * zynqmp_pm_set_suspend_mode()	- Set system suspend mode
+ * @mode:	Mode to set for system suspend
+ *
+ * This API function is used to set mode of system suspend.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_suspend_mode(u32 mode)
+{
+	return zynqmp_pm_invoke_fn(PM_SET_SUSPEND_MODE, mode, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_suspend_mode);
+
+/**
+ * zynqmp_pm_request_node() - Request a node with specific capabilities
+ * @node:		Node ID of the slave
+ * @capabilities:	Requested capabilities of the slave
+ * @qos:		Quality of service (not supported)
+ * @ack:		Flag to specify whether acknowledge is requested
+ *
+ * This function is used by master to request particular node from firmware.
+ * Every master must request node before using it.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_request_node(const u32 node, const u32 capabilities,
+			   const u32 qos, const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_REQUEST_NODE, node, capabilities,
+				   qos, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_node);
+
+/**
+ * zynqmp_pm_release_node() - Release a node
+ * @node:	Node ID of the slave
+ *
+ * This function is used by master to inform firmware that master
+ * has released node. Once released, master must not use that node
+ * without re-request.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_release_node(const u32 node)
+{
+	return zynqmp_pm_invoke_fn(PM_RELEASE_NODE, node, 0, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
+
+/**
+ * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
+ * @node:		Node ID of the slave
+ * @capabilities:	Requested capabilities of the slave
+ * @qos:		Quality of service (not supported)
+ * @ack:		Flag to specify whether acknowledge is requested
+ *
+ * This API function is to be used for slaves a PU already has requested
+ * to change its capabilities.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_requirement(const u32 node, const u32 capabilities,
+			      const u32 qos,
+			      const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_SET_REQUIREMENT, node, capabilities,
+				   qos, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_requirement);
+
+/**
+ * zynqmp_pm_aes - Access AES hardware to encrypt/decrypt the data using
+ * AES-GCM core.
+ * @address:	Address of the AesParams structure.
+ * @out:	Returned output value
+ *
+ * Return:	Returns status, either success or error code.
+ */
+int zynqmp_pm_aes_engine(const u64 address, u32 *out)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	if (!out)
+		return -EINVAL;
+
+	ret = zynqmp_pm_invoke_fn(PM_SECURE_AES, upper_32_bits(address),
+				  lower_32_bits(address),
+				  0, 0, ret_payload);
+	*out = ret_payload[1];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_aes_engine);
+
+/**
+ * zynqmp_pm_system_shutdown - PM call to request a system shutdown or restart
+ * @type:	Shutdown or restart? 0 for shutdown, 1 for restart
+ * @subtype:	Specifies which system should be restarted or shut down
+ *
+ * Return:	Returns status, either success or error+reason
+ */
+int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype)
+{
+	return zynqmp_pm_invoke_fn(PM_SYSTEM_SHUTDOWN, type, subtype,
+				   0, 0, NULL);
+}
+
+/**
+ * struct zynqmp_pm_shutdown_scope - Struct for shutdown scope
+ * @subtype:	Shutdown subtype
+ * @name:	Matching string for scope argument
+ *
+ * This struct encapsulates mapping between shutdown scope ID and string.
+ */
+struct zynqmp_pm_shutdown_scope {
+	const enum zynqmp_pm_shutdown_subtype subtype;
+	const char *name;
+};
+
+static struct zynqmp_pm_shutdown_scope shutdown_scopes[] = {
+	[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM] = {
+		.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SUBSYSTEM,
+		.name = "subsystem",
+	},
+	[ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY] = {
+		.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_PS_ONLY,
+		.name = "ps_only",
+	},
+	[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM] = {
+		.subtype = ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM,
+		.name = "system",
+	},
+};
+
+static struct zynqmp_pm_shutdown_scope *selected_scope =
+		&shutdown_scopes[ZYNQMP_PM_SHUTDOWN_SUBTYPE_SYSTEM];
+
+/**
+ * zynqmp_pm_is_shutdown_scope_valid - Check if shutdown scope string is valid
+ * @scope_string:	Shutdown scope string
+ *
+ * Return:		Return pointer to matching shutdown scope struct from
+ *			array of available options in system if string is valid,
+ *			otherwise returns NULL.
+ */
+static struct zynqmp_pm_shutdown_scope*
+		zynqmp_pm_is_shutdown_scope_valid(const char *scope_string)
+{
+	int count;
+
+	for (count = 0; count < ARRAY_SIZE(shutdown_scopes); count++)
+		if (sysfs_streq(scope_string, shutdown_scopes[count].name))
+			return &shutdown_scopes[count];
+
+	return NULL;
+}
+
+static ssize_t shutdown_scope_show(struct device *device,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(shutdown_scopes); i++) {
+		if (&shutdown_scopes[i] == selected_scope) {
+			strcat(buf, "[");
+			strcat(buf, shutdown_scopes[i].name);
+			strcat(buf, "]");
+		} else {
+			strcat(buf, shutdown_scopes[i].name);
+		}
+		strcat(buf, " ");
+	}
+	strcat(buf, "\n");
+
+	return strlen(buf);
+}
+
+static ssize_t shutdown_scope_store(struct device *device,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	int ret;
+	struct zynqmp_pm_shutdown_scope *scope;
+
+	scope = zynqmp_pm_is_shutdown_scope_valid(buf);
+	if (!scope)
+		return -EINVAL;
+
+	ret = zynqmp_pm_system_shutdown(ZYNQMP_PM_SHUTDOWN_TYPE_SETSCOPE_ONLY,
+					scope->subtype);
+	if (ret) {
+		pr_err("unable to set shutdown scope %s\n", buf);
+		return ret;
+	}
+
+	selected_scope = scope;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(shutdown_scope);
+
+static ssize_t health_status_store(struct device *device,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	int ret;
+	unsigned int value;
+
+	ret = kstrtouint(buf, 10, &value);
+	if (ret)
+		return ret;
+
+	ret = zynqmp_pm_set_boot_health_status(value);
+	if (ret) {
+		dev_err(device, "unable to set healthy bit value to %u\n",
+			value);
+		return ret;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR_WO(health_status);
+
+static ssize_t ggs_show(struct device *device,
+			struct device_attribute *attr,
+			char *buf,
+			u32 reg)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+
+	ret = zynqmp_pm_read_ggs(reg, ret_payload);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", ret_payload[1]);
+}
+
+static ssize_t ggs_store(struct device *device,
+			 struct device_attribute *attr,
+			 const char *buf, size_t count,
+			 u32 reg)
+{
+	long value;
+	int ret;
+
+	if (reg >= GSS_NUM_REGS)
+		return -EINVAL;
+
+	ret = kstrtol(buf, 16, &value);
+	if (ret) {
+		count = -EFAULT;
+		goto err;
+	}
+
+	ret = zynqmp_pm_write_ggs(reg, value);
+	if (ret)
+		count = -EFAULT;
+err:
+	return count;
+}
+
+/* GGS register show functions */
+#define GGS0_SHOW(N)						\
+	ssize_t ggs##N##_show(struct device *device,		\
+			      struct device_attribute *attr,	\
+			      char *buf)			\
+	{							\
+		return ggs_show(device, attr, buf, N);		\
+	}
+
+static GGS0_SHOW(0);
+static GGS0_SHOW(1);
+static GGS0_SHOW(2);
+static GGS0_SHOW(3);
+
+/* GGS register store function */
+#define GGS0_STORE(N)						\
+	ssize_t ggs##N##_store(struct device *device,		\
+			       struct device_attribute *attr,	\
+			       const char *buf,			\
+			       size_t count)			\
+	{							\
+		return ggs_store(device, attr, buf, count, N);	\
+	}
+
+static GGS0_STORE(0);
+static GGS0_STORE(1);
+static GGS0_STORE(2);
+static GGS0_STORE(3);
+
+static ssize_t pggs_show(struct device *device,
+			 struct device_attribute *attr,
+			 char *buf,
+			 u32 reg)
+{
+	int ret;
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+
+	ret = zynqmp_pm_read_pggs(reg, ret_payload);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "0x%x\n", ret_payload[1]);
+}
+
+static ssize_t pggs_store(struct device *device,
+			  struct device_attribute *attr,
+			  const char *buf, size_t count,
+			  u32 reg)
+{
+	long value;
+	int ret;
+
+	if (reg >= GSS_NUM_REGS)
+		return -EINVAL;
+
+	ret = kstrtol(buf, 16, &value);
+	if (ret) {
+		count = -EFAULT;
+		goto err;
+	}
+
+	ret = zynqmp_pm_write_pggs(reg, value);
+	if (ret)
+		count = -EFAULT;
+
+err:
+	return count;
+}
+
+#define PGGS0_SHOW(N)						\
+	ssize_t pggs##N##_show(struct device *device,		\
+			       struct device_attribute *attr,	\
+			       char *buf)			\
+	{							\
+		return pggs_show(device, attr, buf, N);		\
+	}
+
+#define PGGS0_STORE(N)						\
+	ssize_t pggs##N##_store(struct device *device,		\
+				struct device_attribute *attr,	\
+				const char *buf,		\
+				size_t count)			\
+	{							\
+		return pggs_store(device, attr, buf, count, N);	\
+	}
+
+/* PGGS register show functions */
+static PGGS0_SHOW(0);
+static PGGS0_SHOW(1);
+static PGGS0_SHOW(2);
+static PGGS0_SHOW(3);
+
+/* PGGS register store functions */
+static PGGS0_STORE(0);
+static PGGS0_STORE(1);
+static PGGS0_STORE(2);
+static PGGS0_STORE(3);
+
+/* GGS register attributes */
+static DEVICE_ATTR_RW(ggs0);
+static DEVICE_ATTR_RW(ggs1);
+static DEVICE_ATTR_RW(ggs2);
+static DEVICE_ATTR_RW(ggs3);
+
+/* PGGS register attributes */
+static DEVICE_ATTR_RW(pggs0);
+static DEVICE_ATTR_RW(pggs1);
+static DEVICE_ATTR_RW(pggs2);
+static DEVICE_ATTR_RW(pggs3);
+
+static struct attribute *zynqmp_firmware_attrs[] = {
+	&dev_attr_ggs0.attr,
+	&dev_attr_ggs1.attr,
+	&dev_attr_ggs2.attr,
+	&dev_attr_ggs3.attr,
+	&dev_attr_pggs0.attr,
+	&dev_attr_pggs1.attr,
+	&dev_attr_pggs2.attr,
+	&dev_attr_pggs3.attr,
+	&dev_attr_shutdown_scope.attr,
+	&dev_attr_health_status.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(zynqmp_firmware);
+
+static int zynqmp_firmware_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "xlnx,zynqmp");
+	if (!np) {
+		np = of_find_compatible_node(NULL, NULL, "xlnx,versal");
+		if (!np)
+			return 0;
+
+		feature_check_enabled = true;
+	}
+	of_node_put(np);
+
+	ret = get_set_conduit_method(dev->of_node);
+	if (ret)
+		return ret;
+
+	/* Check PM API version number */
+	zynqmp_pm_get_api_version(&pm_api_version);
+	if (pm_api_version < ZYNQMP_PM_VERSION) {
+		panic("%s Platform Management API version error. Expected: v%d.%d - Found: v%d.%d\n",
+		      __func__,
+		      ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR,
+		      pm_api_version >> 16, pm_api_version & 0xFFFF);
+	}
+
+	pr_info("%s Platform Management API v%d.%d\n", __func__,
+		pm_api_version >> 16, pm_api_version & 0xFFFF);
+
+	/* Check trustzone version number */
+	ret = zynqmp_pm_get_trustzone_version(&pm_tz_version);
+	if (ret)
+		panic("Legacy trustzone found without version support\n");
+
+	if (pm_tz_version < ZYNQMP_TZ_VERSION)
+		panic("%s Trustzone version error. Expected: v%d.%d - Found: v%d.%d\n",
+		      __func__,
+		      ZYNQMP_TZ_VERSION_MAJOR, ZYNQMP_TZ_VERSION_MINOR,
+		      pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+	pr_info("%s Trustzone version v%d.%d\n", __func__,
+		pm_tz_version >> 16, pm_tz_version & 0xFFFF);
+
+	ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
+			      ARRAY_SIZE(firmware_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret);
+		return ret;
+	}
+
+	zynqmp_pm_api_debugfs_init();
+
+	return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static int zynqmp_firmware_remove(struct platform_device *pdev)
+{
+	struct pm_api_feature_data *feature_data;
+	struct hlist_node *tmp;
+	int i;
+
+	mfd_remove_devices(&pdev->dev);
+	zynqmp_pm_api_debugfs_exit();
+
+	hash_for_each_safe(pm_api_features_map, i, tmp, feature_data, hentry) {
+		hash_del(&feature_data->hentry);
+		kfree(feature_data);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id zynqmp_firmware_of_match[] = {
+	{.compatible = "xlnx,zynqmp-firmware"},
+	{.compatible = "xlnx,versal-firmware"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, zynqmp_firmware_of_match);
+
+static struct platform_driver zynqmp_firmware_driver = {
+	.driver = {
+		.name = "zynqmp_firmware",
+		.of_match_table = zynqmp_firmware_of_match,
+		.dev_groups = zynqmp_firmware_groups,
+	},
+	.probe = zynqmp_firmware_probe,
+	.remove = zynqmp_firmware_remove,
+};
+module_platform_driver(zynqmp_firmware_driver);