Adding upstream version 2.10.0+dfsg.upstream/2.10.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

23 files changed, 4527 insertions, 0 deletions

diff --git a/plat/ti/k3/board/generic/board.mk b/plat/ti/k3/board/generic/board.mk
new file mode 100644
index 0000000..58c966a
--- /dev/null
+++ b/plat/ti/k3/board/generic/board.mk
@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Define sec_proxy usage as the full prioritized communication scheme
+K3_SEC_PROXY_LITE	:=	0
+$(eval $(call add_define,K3_SEC_PROXY_LITE))
+
+# System coherency is managed in hardware
+USE_COHERENT_MEM	:=	1
diff --git a/plat/ti/k3/board/generic/include/board_def.h b/plat/ti/k3/board/generic/include/board_def.h
new file mode 100644
index 0000000..ade6d7a
--- /dev/null
+++ b/plat/ti/k3/board/generic/include/board_def.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_DEF_H
+#define BOARD_DEF_H
+
+#include <lib/utils_def.h>
+
+/* The ports must be in order and contiguous */
+#define K3_CLUSTER0_CORE_COUNT		U(2)
+#define K3_CLUSTER1_CORE_COUNT		U(2)
+#define K3_CLUSTER2_CORE_COUNT		U(0)
+#define K3_CLUSTER3_CORE_COUNT		U(0)
+
+#define PLAT_PROC_START_ID		U(32)
+#define PLAT_PROC_DEVICE_START_ID	U(202)
+#define PLAT_CLUSTER_DEVICE_START_ID	U(198)
+#define PLAT_BOARD_DEVICE_ID		U(157)
+
+#endif /* BOARD_DEF_H */
diff --git a/plat/ti/k3/board/j784s4/board.mk b/plat/ti/k3/board/j784s4/board.mk
new file mode 100644
index 0000000..21d4151
--- /dev/null
+++ b/plat/ti/k3/board/j784s4/board.mk
@@ -0,0 +1,20 @@
+#
+# Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Define sec_proxy usage as the full prioritized communication scheme
+K3_SEC_PROXY_LITE	:=	0
+$(eval $(call add_define,K3_SEC_PROXY_LITE))
+
+# Use a 4 cycle data RAM latency for J784s4
+K3_DATA_RAM_4_LATENCY	:=	1
+$(eval $(call add_define,K3_DATA_RAM_4_LATENCY))
+
+# Delay snoop exclusive handling for J784s4
+K3_EXCLUSIVE_SNOOP_DELAY	:=	1
+$(eval $(call add_define,K3_EXCLUSIVE_SNOOP_DELAY))
+
+# System coherency is managed in hardware
+USE_COHERENT_MEM	:=	1
diff --git a/plat/ti/k3/board/j784s4/include/board_def.h b/plat/ti/k3/board/j784s4/include/board_def.h
new file mode 100644
index 0000000..c817999
--- /dev/null
+++ b/plat/ti/k3/board/j784s4/include/board_def.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_DEF_H
+#define BOARD_DEF_H
+
+#include <lib/utils_def.h>
+
+/* The ports must be in order and contiguous */
+#define K3_CLUSTER0_CORE_COUNT		U(4)
+#define K3_CLUSTER1_CORE_COUNT		U(4)
+#define K3_CLUSTER2_CORE_COUNT		U(0)
+#define K3_CLUSTER3_CORE_COUNT		U(0)
+
+#define PLAT_PROC_START_ID		U(32)
+#define PLAT_PROC_DEVICE_START_ID	U(202)
+#define PLAT_CLUSTER_DEVICE_START_ID	U(198)
+#define PLAT_BOARD_DEVICE_ID		U(157)
+
+#endif /* BOARD_DEF_H */
diff --git a/plat/ti/k3/board/lite/board.mk b/plat/ti/k3/board/lite/board.mk
new file mode 100644
index 0000000..2fa09ad
--- /dev/null
+++ b/plat/ti/k3/board/lite/board.mk
@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# Define sec_proxy usage as the lite version
+K3_SEC_PROXY_LITE	:=	1
+$(eval $(call add_define,K3_SEC_PROXY_LITE))
+
+# We dont have system level coherency capability
+USE_COHERENT_MEM	:=	0
diff --git a/plat/ti/k3/board/lite/include/board_def.h b/plat/ti/k3/board/lite/include/board_def.h
new file mode 100644
index 0000000..f523198
--- /dev/null
+++ b/plat/ti/k3/board/lite/include/board_def.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2020-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef BOARD_DEF_H
+#define BOARD_DEF_H
+
+#include <lib/utils_def.h>
+
+/* The ports must be in order and contiguous */
+#define K3_CLUSTER0_CORE_COUNT		U(4)
+#define K3_CLUSTER1_CORE_COUNT		U(0)
+#define K3_CLUSTER2_CORE_COUNT		U(0)
+#define K3_CLUSTER3_CORE_COUNT		U(0)
+
+#define PLAT_PROC_START_ID		U(32)
+#define PLAT_PROC_DEVICE_START_ID	U(135)
+#define PLAT_CLUSTER_DEVICE_START_ID	U(134)
+#define PLAT_BOARD_DEVICE_ID		U(157)
+
+#endif /* BOARD_DEF_H */
diff --git a/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.c b/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.c
new file mode 100644
index 0000000..1bed229
--- /dev/null
+++ b/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.c
@@ -0,0 +1,341 @@
+/*
+ * Texas Instruments K3 Secure Proxy Driver
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdlib.h>
+
+#include <platform_def.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <lib/utils.h>
+#include <lib/utils_def.h>
+
+#include "sec_proxy.h"
+
+/* SEC PROXY RT THREAD STATUS */
+#define RT_THREAD_STATUS			(0x0)
+#define RT_THREAD_STATUS_ERROR_SHIFT		(31)
+#define RT_THREAD_STATUS_ERROR_MASK		BIT(31)
+#define RT_THREAD_STATUS_CUR_CNT_SHIFT		(0)
+#define RT_THREAD_STATUS_CUR_CNT_MASK		GENMASK(7, 0)
+
+/* SEC PROXY SCFG THREAD CTRL */
+#define SCFG_THREAD_CTRL			(0x1000)
+#define SCFG_THREAD_CTRL_DIR_SHIFT		(31)
+#define SCFG_THREAD_CTRL_DIR_MASK		BIT(31)
+
+#define SEC_PROXY_THREAD(base, x)		((base) + (0x1000 * (x)))
+#define THREAD_IS_RX				(1)
+#define THREAD_IS_TX				(0)
+
+/**
+ * struct k3_sec_proxy_desc - Description of secure proxy integration
+ * @timeout_us:		Timeout for communication (in Microseconds)
+ * @max_msg_size:	Message size in bytes
+ * @data_start_offset:	Offset of the First data register of the thread
+ * @data_end_offset:	Offset of the Last data register of the thread
+ */
+struct k3_sec_proxy_desc {
+	uint32_t timeout_us;
+	uint16_t max_msg_size;
+	uint16_t data_start_offset;
+	uint16_t data_end_offset;
+};
+
+/**
+ * struct k3_sec_proxy_thread - Description of a Secure Proxy Thread
+ * @name:	Thread Name
+ * @data:	Thread Data path region for target
+ * @scfg:	Secure Config Region for Thread
+ * @rt:		RealTime Region for Thread
+ */
+struct k3_sec_proxy_thread {
+	const char *name;
+	uintptr_t data;
+	uintptr_t scfg;
+	uintptr_t rt;
+};
+
+/**
+ * struct k3_sec_proxy_mbox - Description of a Secure Proxy Instance
+ * @desc:	Description of the SoC integration
+ * @chans:	Array for valid thread instances
+ */
+struct k3_sec_proxy_mbox {
+	const struct k3_sec_proxy_desc desc;
+	struct k3_sec_proxy_thread threads[];
+};
+
+/*
+ * Thread ID #0: DMSC notify
+ * Thread ID #1: DMSC request response
+ * Thread ID #2: DMSC request high priority
+ * Thread ID #3: DMSC request low priority
+ * Thread ID #4: DMSC notify response
+ */
+#define SP_THREAD(_x) \
+	[_x] = { \
+		.name = #_x, \
+		.data = SEC_PROXY_THREAD(SEC_PROXY_DATA_BASE, _x), \
+		.scfg = SEC_PROXY_THREAD(SEC_PROXY_SCFG_BASE, _x), \
+		.rt = SEC_PROXY_THREAD(SEC_PROXY_RT_BASE, _x), \
+	}
+
+static struct k3_sec_proxy_mbox spm = {
+	.desc = {
+		.timeout_us = SEC_PROXY_TIMEOUT_US,
+		.max_msg_size = SEC_PROXY_MAX_MESSAGE_SIZE,
+		.data_start_offset = 0x4,
+		.data_end_offset = 0x3C,
+	},
+	.threads = {
+#if !K3_SEC_PROXY_LITE
+		SP_THREAD(SP_NOTIFY),
+		SP_THREAD(SP_RESPONSE),
+		SP_THREAD(SP_HIGH_PRIORITY),
+		SP_THREAD(SP_LOW_PRIORITY),
+		SP_THREAD(SP_NOTIFY_RESP),
+#else
+		SP_THREAD(SP_RESPONSE),
+		SP_THREAD(SP_HIGH_PRIORITY),
+#endif /* K3_SEC_PROXY_LITE */
+	},
+};
+
+/**
+ * struct sec_msg_hdr - Message header for secure messages and responses
+ * @checksum:	CRC of message for integrity checking
+ */
+union sec_msg_hdr {
+	struct {
+		uint16_t checksum;
+		uint16_t reserved;
+	} __packed;
+	uint32_t data;
+};
+
+/**
+ * k3_sec_proxy_verify_thread() - Verify thread status before
+ *				  sending/receiving data
+ * @spt: Pointer to Secure Proxy thread description
+ * @dir: Direction of the thread
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int k3_sec_proxy_verify_thread(struct k3_sec_proxy_thread *spt,
+					     uint32_t dir)
+{
+	/* Check for any errors already available */
+	if (mmio_read_32(spt->rt + RT_THREAD_STATUS) &
+	    RT_THREAD_STATUS_ERROR_MASK) {
+		ERROR("Thread %s is corrupted, cannot send data\n", spt->name);
+		return -EINVAL;
+	}
+
+	/* Make sure thread is configured for right direction */
+	if ((mmio_read_32(spt->scfg + SCFG_THREAD_CTRL) & SCFG_THREAD_CTRL_DIR_MASK)
+	    != (dir << SCFG_THREAD_CTRL_DIR_SHIFT)) {
+		if (dir == THREAD_IS_TX)
+			ERROR("Trying to send data on RX Thread %s\n",
+			      spt->name);
+		else
+			ERROR("Trying to receive data on TX Thread %s\n",
+			      spt->name);
+		return -EINVAL;
+	}
+
+	/* Check the message queue before sending/receiving data */
+	uint32_t tick_start = (uint32_t)read_cntpct_el0();
+	uint32_t ticks_per_us = SYS_COUNTER_FREQ_IN_TICKS / 1000000;
+	while (!(mmio_read_32(spt->rt + RT_THREAD_STATUS) & RT_THREAD_STATUS_CUR_CNT_MASK)) {
+		VERBOSE("Waiting for thread %s to %s\n",
+			spt->name, (dir == THREAD_IS_TX) ? "empty" : "fill");
+		if (((uint32_t)read_cntpct_el0() - tick_start) >
+		    (spm.desc.timeout_us * ticks_per_us)) {
+			ERROR("Timeout waiting for thread %s to %s\n",
+				spt->name, (dir == THREAD_IS_TX) ? "empty" : "fill");
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * k3_sec_proxy_clear_rx_thread() - Clear Secure Proxy thread
+ *
+ * @id: Channel Identifier
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_clear_rx_thread(enum k3_sec_proxy_chan_id id)
+{
+	struct k3_sec_proxy_thread *spt = &spm.threads[id];
+
+	/* Check for any errors already available */
+	if (mmio_read_32(spt->rt + RT_THREAD_STATUS) &
+	    RT_THREAD_STATUS_ERROR_MASK) {
+		ERROR("Thread %s is corrupted, cannot send data\n", spt->name);
+		return -EINVAL;
+	}
+
+	/* Make sure thread is configured for right direction */
+	if (!(mmio_read_32(spt->scfg + SCFG_THREAD_CTRL) & SCFG_THREAD_CTRL_DIR_MASK)) {
+		ERROR("Cannot clear a transmit thread %s\n", spt->name);
+		return -EINVAL;
+	}
+
+	/* Read off messages from thread until empty */
+	uint32_t try_count = 10;
+	while (mmio_read_32(spt->rt + RT_THREAD_STATUS) & RT_THREAD_STATUS_CUR_CNT_MASK) {
+		if (!(try_count--)) {
+			ERROR("Could not clear all messages from thread %s\n", spt->name);
+			return -ETIMEDOUT;
+		}
+		WARN("Clearing message from thread %s\n", spt->name);
+		mmio_read_32(spt->data + spm.desc.data_end_offset);
+	}
+
+	return 0;
+}
+
+/**
+ * k3_sec_proxy_send() - Send data over a Secure Proxy thread
+ * @id: Channel Identifier
+ * @msg: Pointer to k3_sec_proxy_msg
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_send(enum k3_sec_proxy_chan_id id, const struct k3_sec_proxy_msg *msg)
+{
+	struct k3_sec_proxy_thread *spt = &spm.threads[id];
+	union sec_msg_hdr secure_header;
+	int num_words, trail_bytes, i, ret;
+	uintptr_t data_reg;
+
+	ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_TX);
+	if (ret) {
+		ERROR("Thread %s verification failed (%d)\n", spt->name, ret);
+		return ret;
+	}
+
+	/* Check the message size */
+	if (msg->len + sizeof(secure_header) > spm.desc.max_msg_size) {
+		ERROR("Thread %s message length %lu > max msg size\n",
+		      spt->name, msg->len);
+		return -EINVAL;
+	}
+
+	/* TODO: Calculate checksum */
+	secure_header.checksum = 0;
+
+	/* Send the secure header */
+	data_reg = spm.desc.data_start_offset;
+	mmio_write_32(spt->data + data_reg, secure_header.data);
+	data_reg += sizeof(uint32_t);
+
+	/* Send whole words */
+	num_words = msg->len / sizeof(uint32_t);
+	for (i = 0; i < num_words; i++) {
+		mmio_write_32(spt->data + data_reg, ((uint32_t *)msg->buf)[i]);
+		data_reg += sizeof(uint32_t);
+	}
+
+	/* Send remaining bytes */
+	trail_bytes = msg->len % sizeof(uint32_t);
+	if (trail_bytes) {
+		uint32_t data_trail = 0;
+
+		i = msg->len - trail_bytes;
+		while (trail_bytes--) {
+			data_trail <<= 8;
+			data_trail |= msg->buf[i++];
+		}
+
+		mmio_write_32(spt->data + data_reg, data_trail);
+		data_reg += sizeof(uint32_t);
+	}
+	/*
+	 * 'data_reg' indicates next register to write. If we did not already
+	 * write on tx complete reg(last reg), we must do so for transmit
+	 * In addition, we also need to make sure all intermediate data
+	 * registers(if any required), are reset to 0 for TISCI backward
+	 * compatibility to be maintained.
+	 */
+	while (data_reg <= spm.desc.data_end_offset) {
+		mmio_write_32(spt->data + data_reg, 0);
+		data_reg += sizeof(uint32_t);
+	}
+
+	VERBOSE("Message successfully sent on thread %s\n", spt->name);
+
+	return 0;
+}
+
+/**
+ * k3_sec_proxy_recv() - Receive data from a Secure Proxy thread
+ * @id: Channel Identifier
+ * @msg: Pointer to k3_sec_proxy_msg
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_recv(enum k3_sec_proxy_chan_id id, struct k3_sec_proxy_msg *msg)
+{
+	struct k3_sec_proxy_thread *spt = &spm.threads[id];
+	union sec_msg_hdr secure_header;
+	uintptr_t data_reg;
+	int num_words, trail_bytes, i, ret;
+
+	ret = k3_sec_proxy_verify_thread(spt, THREAD_IS_RX);
+	if (ret) {
+		ERROR("Thread %s verification failed (%d)\n", spt->name, ret);
+		return ret;
+	}
+
+	/* Read secure header */
+	data_reg = spm.desc.data_start_offset;
+	secure_header.data = mmio_read_32(spt->data + data_reg);
+	data_reg += sizeof(uint32_t);
+
+	/* Read whole words */
+	num_words = msg->len / sizeof(uint32_t);
+	for (i = 0; i < num_words; i++) {
+		((uint32_t *)msg->buf)[i] = mmio_read_32(spt->data + data_reg);
+		data_reg += sizeof(uint32_t);
+	}
+
+	/* Read remaining bytes */
+	trail_bytes = msg->len % sizeof(uint32_t);
+	if (trail_bytes) {
+		uint32_t data_trail = mmio_read_32(spt->data + data_reg);
+		data_reg += sizeof(uint32_t);
+
+		i = msg->len - trail_bytes;
+		while (trail_bytes--) {
+			msg->buf[i] = data_trail & 0xff;
+			data_trail >>= 8;
+		}
+	}
+
+	/*
+	 * 'data_reg' indicates next register to read. If we did not already
+	 * read on rx complete reg(last reg), we must do so for receive
+	 */
+	if (data_reg <= spm.desc.data_end_offset)
+		mmio_read_32(spt->data + spm.desc.data_end_offset);
+
+	/* TODO: Verify checksum */
+	(void)secure_header.checksum;
+
+	VERBOSE("Message successfully received from thread %s\n", spt->name);
+
+	return 0;
+}
diff --git a/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.h b/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.h
new file mode 100644
index 0000000..4005102
--- /dev/null
+++ b/plat/ti/k3/common/drivers/sec_proxy/sec_proxy.h
@@ -0,0 +1,82 @@
+/*
+ * Texas Instruments K3 Secure Proxy Driver
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef SEC_PROXY_H
+#define SEC_PROXY_H
+
+#include <stdint.h>
+
+/**
+ * enum k3_sec_proxy_chan_id - Secure Proxy thread IDs
+ *
+ * These the available IDs used in k3_sec_proxy_{send,recv}()
+ * There are two schemes we use:
+ * * if K3_SEC_PROXY_LITE = 1, we just have two threads to talk
+ * * if K3_SEC_PROXY_LITE = 0, we have the full fledged
+ *   communication scheme available.
+ */
+enum k3_sec_proxy_chan_id {
+#if !K3_SEC_PROXY_LITE
+	SP_NOTIFY = 0,
+	SP_RESPONSE,
+	SP_HIGH_PRIORITY,
+	SP_LOW_PRIORITY,
+	SP_NOTIFY_RESP,
+#else
+	SP_RESPONSE = 8,
+	/*
+	 * Note: TISCI documentation indicates "low priority", but in reality
+	 * with a single thread, there is no low or high priority.. This usage
+	 * is more appropriate for TF-A since we can reduce the churn as a
+	 * result.
+	 */
+	SP_HIGH_PRIORITY,
+#endif /* K3_SEC_PROXY_LITE */
+};
+
+/**
+ * struct k3_sec_proxy_msg - Secure proxy message structure
+ * @len: Length of data in the Buffer
+ * @buf: Buffer pointer
+ *
+ * This is the structure for data used in k3_sec_proxy_{send,recv}()
+ */
+struct k3_sec_proxy_msg {
+	size_t len;
+	uint8_t *buf;
+};
+
+/**
+ * k3_sec_proxy_clear_rx_thread() - Clear a receive Secure Proxy thread
+ * @id: Channel Identifier
+ * @msg: Pointer to k3_sec_proxy_msg
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_clear_rx_thread(enum k3_sec_proxy_chan_id id);
+
+/**
+ * k3_sec_proxy_send() - Send data over a Secure Proxy thread
+ * @id: Channel Identifier
+ * @msg: Pointer to k3_sec_proxy_msg
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_send(enum k3_sec_proxy_chan_id id, const struct k3_sec_proxy_msg *msg);
+
+/**
+ * k3_sec_proxy_recv() - Receive data from a Secure Proxy thread
+ * @id: Channel Identifier
+ * @msg: Pointer to k3_sec_proxy_msg
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int k3_sec_proxy_recv(enum k3_sec_proxy_chan_id id, struct k3_sec_proxy_msg *msg);
+
+#endif /* SEC_PROXY_H */
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
new file mode 100644
index 0000000..d04d805
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
@@ -0,0 +1,1755 @@
+/*
+ * Texas Instruments System Control Interface Driver
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <string.h>
+
+#include <platform_def.h>
+#include <lib/bakery_lock.h>
+
+#include <common/debug.h>
+#include <sec_proxy.h>
+
+#include "ti_sci_protocol.h"
+#include "ti_sci.h"
+
+#if USE_COHERENT_MEM
+__section(".tzfw_coherent_mem")
+#endif
+static uint8_t message_sequence;
+
+DEFINE_BAKERY_LOCK(ti_sci_xfer_lock);
+
+/**
+ * struct ti_sci_xfer - Structure representing a message flow
+ * @tx_message:	Transmit message
+ * @rx_message:	Receive message
+ */
+struct ti_sci_xfer {
+	struct k3_sec_proxy_msg tx_message;
+	struct k3_sec_proxy_msg rx_message;
+};
+
+/**
+ * ti_sci_setup_one_xfer() - Setup one message type
+ *
+ * @msg_type:	Message type
+ * @msg_flags:	Flag to set for the message
+ * @tx_buf:	Buffer to be sent to mailbox channel
+ * @tx_message_size: transmit message size
+ * @rx_buf:	Buffer to be received from mailbox channel
+ * @rx_message_size: receive message size
+ *
+ * Helper function which is used by various command functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_setup_one_xfer(uint16_t msg_type, uint32_t msg_flags,
+				 void *tx_buf,
+				 size_t tx_message_size,
+				 void *rx_buf,
+				 size_t rx_message_size,
+				 struct ti_sci_xfer *xfer)
+{
+	struct ti_sci_msg_hdr *hdr;
+
+	/* Ensure we have sane transfer sizes */
+	if (rx_message_size > TI_SCI_MAX_MESSAGE_SIZE ||
+	    tx_message_size > TI_SCI_MAX_MESSAGE_SIZE ||
+	    tx_message_size < sizeof(*hdr))
+		return -ERANGE;
+
+	hdr = (struct ti_sci_msg_hdr *)tx_buf;
+	hdr->seq = ++message_sequence;
+	hdr->type = msg_type;
+	hdr->host = TI_SCI_HOST_ID;
+	hdr->flags = msg_flags;
+	/* Request a response if rx_message_size is non-zero */
+	if (rx_message_size != 0U) {
+		hdr->flags |= TI_SCI_FLAG_REQ_ACK_ON_PROCESSED;
+	}
+
+	xfer->tx_message.buf = tx_buf;
+	xfer->tx_message.len = tx_message_size;
+
+	xfer->rx_message.buf = rx_buf;
+	xfer->rx_message.len = rx_message_size;
+
+	return 0;
+}
+
+/**
+ * ti_sci_get_response() - Receive response from mailbox channel
+ *
+ * @xfer:	Transfer to initiate and wait for response
+ * @chan:	Channel to receive the response
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_get_response(struct k3_sec_proxy_msg *msg,
+			       enum k3_sec_proxy_chan_id chan)
+{
+	struct ti_sci_msg_hdr *hdr;
+	unsigned int retry = 5;
+	int ret;
+
+	for (; retry > 0; retry--) {
+		/* Receive the response */
+		ret = k3_sec_proxy_recv(chan, msg);
+		if (ret) {
+			ERROR("Message receive failed (%d)\n", ret);
+			return ret;
+		}
+
+		/* msg is updated by Secure Proxy driver */
+		hdr = (struct ti_sci_msg_hdr *)msg->buf;
+
+		/* Sanity check for message response */
+		if (hdr->seq == message_sequence)
+			break;
+		else
+			WARN("Message with sequence ID %u is not expected\n", hdr->seq);
+	}
+	if (!retry) {
+		ERROR("Timed out waiting for message\n");
+		return -EINVAL;
+	}
+
+	if (msg->len > TI_SCI_MAX_MESSAGE_SIZE) {
+		ERROR("Unable to handle %lu xfer (max %d)\n",
+		      msg->len, TI_SCI_MAX_MESSAGE_SIZE);
+		return -EINVAL;
+	}
+
+	if (!(hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK))
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * ti_sci_do_xfer() - Do one transfer
+ *
+ * @xfer:	Transfer to initiate and wait for response
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_do_xfer(struct ti_sci_xfer *xfer)
+{
+	struct k3_sec_proxy_msg *tx_msg = &xfer->tx_message;
+	struct k3_sec_proxy_msg *rx_msg = &xfer->rx_message;
+	int ret;
+
+	bakery_lock_get(&ti_sci_xfer_lock);
+
+	/* Clear any spurious messages in receive queue */
+	ret = k3_sec_proxy_clear_rx_thread(SP_RESPONSE);
+	if (ret) {
+		ERROR("Could not clear response queue (%d)\n", ret);
+		goto unlock;
+	}
+
+	/* Send the message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, tx_msg);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		goto unlock;
+	}
+
+	/* Get the response if requested */
+	if (rx_msg->len != 0U) {
+		ret = ti_sci_get_response(rx_msg, SP_RESPONSE);
+		if (ret != 0U) {
+			ERROR("Failed to get response (%d)\n", ret);
+			goto unlock;
+		}
+	}
+
+unlock:
+	bakery_lock_release(&ti_sci_xfer_lock);
+
+	return ret;
+}
+
+/**
+ * ti_sci_get_revision() - Get the revision of the SCI entity
+ *
+ * Updates the SCI information in the internal data structure.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_get_revision(struct ti_sci_msg_resp_version *rev_info)
+{
+	struct ti_sci_msg_hdr hdr;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_VERSION, 0x0,
+				    &hdr, sizeof(hdr),
+				    rev_info, sizeof(*rev_info),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_query_fw_caps() - Get the FW/SoC capabilities
+ * @handle:		Pointer to TI SCI handle
+ * @fw_caps:		Each bit in fw_caps indicating one FW/SOC capability
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+int ti_sci_query_fw_caps(uint64_t *fw_caps)
+{
+	struct ti_sci_msg_hdr req;
+	struct ti_sci_msg_resp_query_fw_caps resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_QUERY_FW_CAPS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret != 0U) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret != 0U) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (fw_caps)
+		*fw_caps = resp.fw_caps;
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_set_state() - Set device state
+ *
+ * @id:		Device identifier
+ * @flags:	flags to setup for the device
+ * @state:	State to move the device to
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_device_set_state(uint32_t id, uint32_t flags, uint8_t state)
+{
+	struct ti_sci_msg_req_set_device_state req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_STATE, flags,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+	req.state = state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get_state() - Get device state
+ *
+ * @id:		Device Identifier
+ * @clcnt:	Pointer to Context Loss Count
+ * @resets:	pointer to resets
+ * @p_state:	pointer to p_state
+ * @c_state:	pointer to c_state
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_device_get_state(uint32_t id,  uint32_t *clcnt,
+				   uint32_t *resets, uint8_t *p_state,
+				   uint8_t *c_state)
+{
+	struct ti_sci_msg_req_get_device_state req;
+	struct ti_sci_msg_resp_get_device_state resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	if (!clcnt && !resets && !p_state && !c_state)
+		return -EINVAL;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_DEVICE_STATE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (clcnt)
+		*clcnt = resp.context_loss_count;
+	if (resets)
+		*resets = resp.resets;
+	if (p_state)
+		*p_state = resp.programmed_state;
+	if (c_state)
+		*c_state = resp.current_state;
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get() - Request for device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_device_get_exclusive() - Exclusive request for device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * NOTE: This _exclusive version of the get API is for exclusive access to the
+ * device. Any other host in the system will fail to get this device after this
+ * call until exclusive access is released with device_put or a non-exclusive
+ * set call.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_exclusive(uint32_t id)
+{
+	return ti_sci_device_set_state(id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_device_idle() - Idle a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_idle(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_device_idle_exclusive() - Exclusive idle a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * NOTE: This _exclusive version of the idle API is for exclusive access to
+ * the device. Any other host in the system will fail to get this device after
+ * this call until exclusive access is released with device_put or a
+ * non-exclusive set call.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_idle_exclusive(uint32_t id)
+{
+	return ti_sci_device_set_state(id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_device_put() - Release a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_put(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_AUTO_OFF);
+}
+
+/**
+ * ti_sci_device_put_no_wait() - Release a device without requesting or waiting
+ *				 for a response.
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_put_no_wait(uint32_t id)
+{
+	struct ti_sci_msg_req_set_device_state req;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_STATE, 0,
+				    &req, sizeof(req),
+				    NULL, 0,
+				    &xfer);
+	if (ret != 0U) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+	req.state = MSG_DEVICE_SW_STATE_AUTO_OFF;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret != 0U) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_valid() - Is the device valid
+ *
+ * @id:		Device Identifier
+ *
+ * Return: 0 if all goes well and the device ID is valid, else return
+ *         appropriate error
+ */
+int ti_sci_device_is_valid(uint32_t id)
+{
+	uint8_t unused;
+
+	/* check the device state which will also tell us if the ID is valid */
+	return ti_sci_device_get_state(id, NULL, NULL, NULL, &unused);
+}
+
+/**
+ * ti_sci_device_get_clcnt() - Get context loss counter
+ *
+ * @id:		Device Identifier
+ * @count:	Pointer to Context Loss counter to populate
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_clcnt(uint32_t id, uint32_t *count)
+{
+	return ti_sci_device_get_state(id, count, NULL, NULL, NULL);
+}
+
+/**
+ * ti_sci_device_is_idle() - Check if the device is requested to be idle
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be idle
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_idle(uint32_t id, bool *r_state)
+{
+	int ret;
+	uint8_t state;
+
+	if (!r_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, &state, NULL);
+	if (ret)
+		return ret;
+
+	*r_state = (state == MSG_DEVICE_SW_STATE_RETENTION);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_stop() - Check if the device is requested to be stopped
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be stopped
+ * @curr_state:	true if currently stopped
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_stop(uint32_t id, bool *r_state,  bool *curr_state)
+{
+	int ret;
+	uint8_t p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_on() - Check if the device is requested to be ON
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be ON
+ * @curr_state:	true if currently ON and active
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_on(uint32_t id, bool *r_state,  bool *curr_state)
+{
+	int ret;
+	uint8_t p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret =
+	    ti_sci_device_get_state(id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_ON);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_ON);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_trans() - Check if the device is currently transitioning
+ *
+ * @id:		Device Identifier
+ * @curr_state:	true if currently transitioning
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_trans(uint32_t id, bool *curr_state)
+{
+	int ret;
+	uint8_t state;
+
+	if (!curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, NULL, &state);
+	if (ret)
+		return ret;
+
+	*curr_state = (state == MSG_DEVICE_HW_STATE_TRANS);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_set_resets() - Set resets for device managed by TISCI
+ *
+ * @id:			Device Identifier
+ * @reset_state:	Device specific reset bit field
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_set_resets(uint32_t id, uint32_t reset_state)
+{
+	struct ti_sci_msg_req_set_device_resets req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_RESETS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+	req.resets = reset_state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get_resets() - Get reset state for device managed by TISCI
+ *
+ * @id:			Device Identifier
+ * @reset_state:	Pointer to reset state to populate
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_resets(uint32_t id, uint32_t *reset_state)
+{
+	return ti_sci_device_get_state(id, NULL, reset_state, NULL, NULL);
+}
+
+/**
+ * ti_sci_clock_set_state() - Set clock state helper
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request,
+ *		Each device has its own set of clock inputs, This indexes
+ *		which clock input to modify
+ * @flags:	Header flags as needed
+ * @state:	State to request for the clock
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_state(uint32_t dev_id, uint8_t clk_id,
+			   uint32_t flags, uint8_t state)
+{
+	struct ti_sci_msg_req_set_clock_state req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_STATE, flags,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.request_state = state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_state() - Get clock state helper
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @programmed_state:	State requested for clock to move to
+ * @current_state:	State that the clock is currently in
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_state(uint32_t dev_id, uint8_t clk_id,
+			   uint8_t *programmed_state,
+			   uint8_t *current_state)
+{
+	struct ti_sci_msg_req_get_clock_state req;
+	struct ti_sci_msg_resp_get_clock_state resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	if (!programmed_state && !current_state)
+		return -EINVAL;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_STATE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (programmed_state)
+		*programmed_state = resp.programmed_state;
+	if (current_state)
+		*current_state = resp.current_state;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get() - Get control of a clock from TI SCI
+
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @needs_ssc: 'true' iff Spread Spectrum clock is desired
+ * @can_change_freq: 'true' iff frequency change is desired
+ * @enable_input_term: 'true' iff input termination is desired
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get(uint32_t dev_id, uint8_t clk_id,
+		     bool needs_ssc, bool can_change_freq,
+		     bool enable_input_term)
+{
+	uint32_t flags = 0;
+
+	flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0;
+	flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0;
+	flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0;
+
+	return ti_sci_clock_set_state(dev_id, clk_id, flags,
+				      MSG_CLOCK_SW_STATE_REQ);
+}
+
+/**
+ * ti_sci_clock_idle() - Idle a clock which is in our control
+
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_idle(uint32_t dev_id, uint8_t clk_id)
+{
+	return ti_sci_clock_set_state(dev_id, clk_id, 0,
+				      MSG_CLOCK_SW_STATE_UNREQ);
+}
+
+/**
+ * ti_sci_clock_put() - Release a clock from our control
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_put(uint32_t dev_id, uint8_t clk_id)
+{
+	return ti_sci_clock_set_state(dev_id, clk_id, 0,
+				      MSG_CLOCK_SW_STATE_AUTO);
+}
+
+/**
+ * ti_sci_clock_is_auto() - Is the clock being auto managed
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is auto managed
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_auto(uint32_t dev_id, uint8_t clk_id, bool *req_state)
+{
+	uint8_t state = 0;
+	int ret;
+
+	if (!req_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &state, NULL);
+	if (ret)
+		return ret;
+
+	*req_state = (state == MSG_CLOCK_SW_STATE_AUTO);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_is_on() - Is the clock ON
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and enabled
+ * @curr_state: state indicating if the clock is ready for operation
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_on(uint32_t dev_id, uint8_t clk_id,
+		       bool *req_state, bool *curr_state)
+{
+	uint8_t c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_REQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_READY);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_is_off() - Is the clock OFF
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and disabled
+ * @curr_state: state indicating if the clock is NOT ready for operation
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_off(uint32_t dev_id, uint8_t clk_id,
+			bool *req_state, bool *curr_state)
+{
+	uint8_t c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_set_parent() - Set the clock source of a specific device clock
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Parent clock identifier to set
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_parent(uint32_t dev_id, uint8_t clk_id, uint8_t parent_id)
+{
+	struct ti_sci_msg_req_set_clock_parent req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_PARENT, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.parent_id = parent_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_parent() - Get current parent clock source
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Current clock parent
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_parent(uint32_t dev_id, uint8_t clk_id, uint8_t *parent_id)
+{
+	struct ti_sci_msg_req_get_clock_parent req;
+	struct ti_sci_msg_resp_get_clock_parent resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_PARENT, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*parent_id = resp.parent_id;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_num_parents() - Get num parents of the current clk source
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @num_parents: Returns he number of parents to the current clock.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_num_parents(uint32_t dev_id, uint8_t clk_id,
+				 uint8_t *num_parents)
+{
+	struct ti_sci_msg_req_get_clock_num_parents req;
+	struct ti_sci_msg_resp_get_clock_num_parents resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*num_parents = resp.num_parents;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_match_freq() - Find a good match for frequency
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @match_freq:	Frequency match in Hz response.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_match_freq(uint32_t dev_id, uint8_t clk_id,
+				uint64_t min_freq, uint64_t target_freq,
+				uint64_t max_freq, uint64_t *match_freq)
+{
+	struct ti_sci_msg_req_query_clock_freq req;
+	struct ti_sci_msg_resp_query_clock_freq resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_QUERY_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.min_freq_hz = min_freq;
+	req.target_freq_hz = target_freq;
+	req.max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*match_freq = resp.freq_hz;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_set_freq() - Set a frequency for clock
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_freq(uint32_t dev_id, uint8_t clk_id, uint64_t min_freq,
+			  uint64_t target_freq, uint64_t max_freq)
+{
+	struct ti_sci_msg_req_set_clock_freq req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.min_freq_hz = min_freq;
+	req.target_freq_hz = target_freq;
+	req.max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_freq() - Get current frequency
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @freq:	Currently frequency in Hz
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_freq(uint32_t dev_id, uint8_t clk_id, uint64_t *freq)
+{
+	struct ti_sci_msg_req_get_clock_freq req;
+	struct ti_sci_msg_resp_get_clock_freq resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*freq = resp.freq_hz;
+
+	return 0;
+}
+
+/**
+ * ti_sci_core_reboot() - Command to request system reset
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_core_reboot(void)
+{
+	struct ti_sci_msg_req_reboot req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SYS_RESET, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+	req.domain = TI_SCI_DOMAIN_FULL_SOC_RESET;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_request() - Request a physical processor control
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_request(uint8_t proc_id)
+{
+	struct ti_sci_msg_req_proc_request req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_REQUEST, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_release() - Release a physical processor control
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_release(uint8_t proc_id)
+{
+	struct ti_sci_msg_req_proc_release req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_RELEASE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_handover() - Handover a physical processor control to a host in
+ *                          the processor's access control list.
+ *
+ * @proc_id:	Processor ID this request is for
+ * @host_id:	Host ID to get the control of the processor
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_handover(uint8_t proc_id, uint8_t host_id)
+{
+	struct ti_sci_msg_req_proc_handover req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_HANDOVER, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.host_id = host_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_cfg() - Set the processor boot configuration flags
+ *
+ * @proc_id:		Processor ID this request is for
+ * @config_flags_set:	Configuration flags to be set
+ * @config_flags_clear:	Configuration flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_cfg(uint8_t proc_id, uint64_t bootvector,
+			     uint32_t config_flags_set,
+			     uint32_t config_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_config req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_SET_PROC_BOOT_CONFIG, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK;
+	req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+	req.config_flags_set = config_flags_set;
+	req.config_flags_clear = config_flags_clear;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_ctrl() - Set the processor boot control flags
+ *
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_ctrl(uint8_t proc_id, uint32_t control_flags_set,
+			      uint32_t control_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_ctrl req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_SET_PROC_BOOT_CTRL, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.control_flags_set = control_flags_set;
+	req.control_flags_clear = control_flags_clear;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_ctrl_no_wait() - Set the processor boot control flags
+ *					 without requesting or waiting for a
+ *					 response.
+ *
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_ctrl_no_wait(uint8_t proc_id,
+				      uint32_t control_flags_set,
+				      uint32_t control_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_ctrl req;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_SET_PROC_BOOT_CTRL, 0,
+				    &req, sizeof(req),
+				    NULL, 0,
+				    &xfer);
+	if (ret != 0U) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.control_flags_set = control_flags_set;
+	req.control_flags_clear = control_flags_clear;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret != 0U) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_auth_boot_image() - Authenticate and load image and then set the
+ *                                 processor configuration flags
+ *
+ * @proc_id:	Processor ID this request is for
+ * @cert_addr:	Memory address at which payload image certificate is located
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_auth_boot_image(uint8_t proc_id, uint64_t cert_addr)
+{
+	struct ti_sci_msg_req_proc_auth_boot_image req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_AUTH_BOOT_IMAGE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.cert_addr_low = cert_addr & TISCI_ADDR_LOW_MASK;
+	req.cert_addr_high = (cert_addr & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_get_boot_status() - Get the processor boot status
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv,
+				uint32_t *cfg_flags,
+				uint32_t *ctrl_flags,
+				uint32_t *sts_flags)
+{
+	struct ti_sci_msg_req_get_proc_boot_status req;
+	struct ti_sci_msg_resp_get_proc_boot_status resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_GET_PROC_BOOT_STATUS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*bv = (resp.bootvector_low & TISCI_ADDR_LOW_MASK) |
+	      (((uint64_t)resp.bootvector_high << TISCI_ADDR_HIGH_SHIFT) &
+	       TISCI_ADDR_HIGH_MASK);
+	*cfg_flags = resp.config_flags;
+	*ctrl_flags = resp.control_flags;
+	*sts_flags = resp.status_flags;
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_wait_boot_status() - Wait for a processor boot status
+ *
+ * @proc_id:			Processor ID this request is for
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations,
+				 uint8_t num_match_iterations,
+				 uint8_t delay_per_iteration_us,
+				 uint8_t delay_before_iterations_us,
+				 uint32_t status_flags_1_set_all_wait,
+				 uint32_t status_flags_1_set_any_wait,
+				 uint32_t status_flags_1_clr_all_wait,
+				 uint32_t status_flags_1_clr_any_wait)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.num_wait_iterations = num_wait_iterations;
+	req.num_match_iterations = num_match_iterations;
+	req.delay_per_iteration_us = delay_per_iteration_us;
+	req.delay_before_iterations_us = delay_before_iterations_us;
+	req.status_flags_1_set_all_wait = status_flags_1_set_all_wait;
+	req.status_flags_1_set_any_wait = status_flags_1_set_any_wait;
+	req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait;
+	req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_wait_boot_status_no_wait() - Wait for a processor boot status
+ *					    without requesting or waiting for
+ *					    a response.
+ *
+ * @proc_id:			Processor ID this request is for
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_wait_boot_status_no_wait(uint8_t proc_id,
+					 uint8_t num_wait_iterations,
+					 uint8_t num_match_iterations,
+					 uint8_t delay_per_iteration_us,
+					 uint8_t delay_before_iterations_us,
+					 uint32_t status_flags_1_set_all_wait,
+					 uint32_t status_flags_1_set_any_wait,
+					 uint32_t status_flags_1_clr_all_wait,
+					 uint32_t status_flags_1_clr_any_wait)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status req;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS, 0,
+				    &req, sizeof(req),
+				    NULL, 0,
+				    &xfer);
+	if (ret != 0U) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.num_wait_iterations = num_wait_iterations;
+	req.num_match_iterations = num_match_iterations;
+	req.delay_per_iteration_us = delay_per_iteration_us;
+	req.delay_before_iterations_us = delay_before_iterations_us;
+	req.status_flags_1_set_all_wait = status_flags_1_set_all_wait;
+	req.status_flags_1_set_any_wait = status_flags_1_set_any_wait;
+	req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait;
+	req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret != 0U) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ *
+ * @proc_id: Processor ID.
+ * @mode: Low power mode to enter.
+ * @core_resume_addr: Address that core should be
+ *		      resumed from after low power transition.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+		       uint8_t mode,
+		       uint64_t core_resume_addr)
+{
+	struct ti_sci_msg_req_enter_sleep req;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_ENTER_SLEEP, 0,
+				    &req, sizeof(req),
+				    NULL, 0,
+				    &xfer);
+	if (ret != 0U) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.mode = mode;
+	req.core_resume_lo = core_resume_addr & TISCI_ADDR_LOW_MASK;
+	req.core_resume_hi = (core_resume_addr & TISCI_ADDR_HIGH_MASK) >>
+			     TISCI_ADDR_HIGH_SHIFT;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret != 0U) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_init() - Basic initialization
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_init(void)
+{
+	struct ti_sci_msg_resp_version rev_info;
+	int ret;
+
+	ret = ti_sci_get_revision(&rev_info);
+	if (ret) {
+		ERROR("Unable to communicate with control firmware (%d)\n", ret);
+		return ret;
+	}
+
+	INFO("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+	     rev_info.abi_major, rev_info.abi_minor,
+	     rev_info.firmware_revision,
+	     rev_info.firmware_description);
+
+	return 0;
+}
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
new file mode 100644
index 0000000..c702a71
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
@@ -0,0 +1,235 @@
+/*
+ * Texas Instruments System Control Interface API
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TI_SCI_H
+#define TI_SCI_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+ * Device control operations
+ *
+ * - ti_sci_device_get - command to request for device managed by TISCI
+ * - ti_sci_device_get_exclusive - exclusively request a device
+ * - ti_sci_device_idle - Command to idle a device managed by TISCI
+ * - ti_sci_device_idle_exclusive - exclusively idle a device
+ * - ti_sci_device_put - command to release a device managed by TISCI
+ * - ti_sci_device_put_no_wait - release a device without waiting for response
+ * - ti_sci_device_is_valid - Is the device valid
+ * - ti_sci_device_get_clcnt - Get context loss counter
+ *              @count: Pointer to Context Loss counter to populate
+ * - ti_sci_device_is_idle - Check if the device is requested to be idle
+ *              @r_state: true if requested to be idle
+ * - ti_sci_device_is_stop - Check if the device is requested to be stopped
+ *              @r_state: true if requested to be stopped
+ *              @curr_state: true if currently stopped.
+ * - ti_sci_device_is_on - Check if the device is requested to be ON
+ *              @r_state: true if requested to be ON
+ *              @curr_state: true if currently ON and active
+ * - ti_sci_device_is_trans - Check if the device is currently transitioning
+ *              @curr_state: true if currently transitioning.
+ * - ti_sci_device_set_resets - Command to set resets for
+ *                              device managed by TISCI
+ *              @reset_state: Device specific reset bit field
+ * - ti_sci_device_get_resets - Get reset state for device managed by TISCI
+ *              @reset_state: Pointer to reset state to populate
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @id:		Device Identifier
+ * Returns 0 for successful request, else returns corresponding error message.
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ */
+int ti_sci_device_get(uint32_t id);
+int ti_sci_device_get_exclusive(uint32_t id);
+int ti_sci_device_idle(uint32_t id);
+int ti_sci_device_idle_exclusive(uint32_t id);
+int ti_sci_device_put(uint32_t id);
+int ti_sci_device_put_no_wait(uint32_t id);
+int ti_sci_device_is_valid(uint32_t id);
+int ti_sci_device_get_clcnt(uint32_t id, uint32_t *count);
+int ti_sci_device_is_idle(uint32_t id, bool *r_state);
+int ti_sci_device_is_stop(uint32_t id, bool *r_state,  bool *curr_state);
+int ti_sci_device_is_on(uint32_t id, bool *r_state,  bool *curr_state);
+int ti_sci_device_is_trans(uint32_t id, bool *curr_state);
+int ti_sci_device_set_resets(uint32_t id, uint32_t reset_state);
+int ti_sci_device_get_resets(uint32_t id, uint32_t *reset_state);
+
+/**
+ * Clock control operations
+ *
+ * - ti_sci_clock_get - Get control of a clock from TI SCI
+ *              @needs_ssc: 'true' iff Spread Spectrum clock is desired
+ *              @can_change_freq: 'true' iff frequency change is desired
+ *              @enable_input_term: 'true' iff input termination is desired
+ * - ti_sci_clock_idle - Idle a clock which is in our control
+ * - ti_sci_clock_put - Release a clock from our control
+ * - ti_sci_clock_is_auto - Is the clock being auto managed
+ *              @req_state: state indicating if the clock is auto managed
+ * - ti_sci_clock_is_on - Is the clock ON
+ *              @req_state: state indicating if the clock is managed by us and enabled
+ *              @curr_state: state indicating if the clock is ready for operation
+ * - ti_sci_clock_is_off - Is the clock OFF
+ *              @req_state: state indicating if the clock is managed by us and disabled
+ *              @curr_state: state indicating if the clock is NOT ready for operation
+ * - ti_sci_clock_set_parent - Set the clock source of a specific device clock
+ *              @parent_id: Parent clock identifier to set
+ * - ti_sci_clock_get_parent - Get current parent clock source
+ *              @parent_id: Current clock parent
+ * - ti_sci_clock_get_num_parents - Get num parents of the current clk source
+ *              @num_parents: Returns he number of parents to the current clock.
+ * - ti_sci_clock_get_match_freq - Find a good match for frequency
+ *              @match_freq: Frequency match in Hz response.
+ * - ti_sci_clock_set_freq - Set a frequency for clock
+ * - ti_sci_clock_get_freq - Get current frequency
+ *              @freq: Currently frequency in Hz
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * Returns 0 for successful request, else returns corresponding error message.
+ *
+ * Request for the clock - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_clock with put_clock. No refcounting is
+ * managed by driver for that purpose.
+ */
+int ti_sci_clock_get(uint32_t dev_id, uint8_t clk_id,
+		     bool needs_ssc, bool can_change_freq,
+		     bool enable_input_term);
+int ti_sci_clock_idle(uint32_t dev_id, uint8_t clk_id);
+int ti_sci_clock_put(uint32_t dev_id, uint8_t clk_id);
+int ti_sci_clock_is_auto(uint32_t dev_id, uint8_t clk_id,
+			 bool *req_state);
+int ti_sci_clock_is_on(uint32_t dev_id, uint8_t clk_id,
+		       bool *req_state, bool *curr_state);
+int ti_sci_clock_is_off(uint32_t dev_id, uint8_t clk_id,
+			bool *req_state, bool *curr_state);
+int ti_sci_clock_set_parent(uint32_t dev_id, uint8_t clk_id,
+			    uint8_t parent_id);
+int ti_sci_clock_get_parent(uint32_t dev_id, uint8_t clk_id,
+			    uint8_t *parent_id);
+int ti_sci_clock_get_num_parents(uint32_t dev_id, uint8_t clk_id,
+				 uint8_t *num_parents);
+int ti_sci_clock_get_match_freq(uint32_t dev_id, uint8_t clk_id,
+				uint64_t min_freq, uint64_t target_freq,
+				uint64_t max_freq, uint64_t *match_freq);
+int ti_sci_clock_set_freq(uint32_t dev_id, uint8_t clk_id,
+			  uint64_t min_freq, uint64_t target_freq,
+			  uint64_t max_freq);
+int ti_sci_clock_get_freq(uint32_t dev_id, uint8_t clk_id, uint64_t *freq);
+
+/**
+ * Core control operations
+ *
+ * - ti_sci_core_reboot() - Command to request system reset
+ * - ti_sci_query_fw_caps() - Get the FW/SoC capabilities
+ *              @fw_caps: Each bit in fw_caps indicating one FW/SOC capability
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+int ti_sci_core_reboot(void);
+int ti_sci_query_fw_caps(uint64_t *fw_caps);
+
+/**
+ * Processor control operations
+ *
+ * - ti_sci_proc_request - Command to request a physical processor control
+ * - ti_sci_proc_release - Command to release a physical processor control
+ * - ti_sci_proc_handover - Command to handover a physical processor control to
+ *                          a host in the processor's access control list.
+ *              @host_id: Host ID to get the control of the processor
+ * - ti_sci_proc_set_boot_cfg - Command to set the processor boot configuration flags
+ *              @config_flags_set: Configuration flags to be set
+ *              @config_flags_clear: Configuration flags to be cleared.
+ * - ti_sci_proc_set_boot_ctrl - Command to set the processor boot control flags
+ *              @control_flags_set: Control flags to be set
+ *              @control_flags_clear: Control flags to be cleared
+ * - ti_sci_proc_set_boot_ctrl_no_wait - Same as above without waiting for response
+ * - ti_sci_proc_auth_boot_image - Command to authenticate and load the image
+ *                                 and then set the processor configuration flags.
+ *              @cert_addr: Memory address at which payload image certificate is located.
+ * - ti_sci_proc_get_boot_status - Command to get the processor boot status
+ * - ti_sci_proc_wait_boot_status - Command to wait for a processor boot status
+ * - ti_sci_proc_wait_boot_status_no_wait - Same as above without waiting for response
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @proc_id:	Processor ID
+ * Returns 0 for successful request, else returns corresponding error message.
+ */
+int ti_sci_proc_request(uint8_t proc_id);
+int ti_sci_proc_release(uint8_t proc_id);
+int ti_sci_proc_handover(uint8_t proc_id, uint8_t host_id);
+int ti_sci_proc_set_boot_cfg(uint8_t proc_id, uint64_t bootvector,
+			     uint32_t config_flags_set,
+			     uint32_t config_flags_clear);
+int ti_sci_proc_set_boot_ctrl(uint8_t proc_id, uint32_t control_flags_set,
+			      uint32_t control_flags_clear);
+int ti_sci_proc_set_boot_ctrl_no_wait(uint8_t proc_id,
+				      uint32_t control_flags_set,
+				      uint32_t control_flags_clear);
+int ti_sci_proc_auth_boot_image(uint8_t proc_id, uint64_t cert_addr);
+int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv,
+				uint32_t *cfg_flags,
+				uint32_t *ctrl_flags,
+				uint32_t *sts_flags);
+int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations,
+				 uint8_t num_match_iterations,
+				 uint8_t delay_per_iteration_us,
+				 uint8_t delay_before_iterations_us,
+				 uint32_t status_flags_1_set_all_wait,
+				 uint32_t status_flags_1_set_any_wait,
+				 uint32_t status_flags_1_clr_all_wait,
+				 uint32_t status_flags_1_clr_any_wait);
+int ti_sci_proc_wait_boot_status_no_wait(uint8_t proc_id,
+					 uint8_t num_wait_iterations,
+					 uint8_t num_match_iterations,
+					 uint8_t delay_per_iteration_us,
+					 uint8_t delay_before_iterations_us,
+					 uint32_t status_flags_1_set_all_wait,
+					 uint32_t status_flags_1_set_any_wait,
+					 uint32_t status_flags_1_clr_all_wait,
+					 uint32_t status_flags_1_clr_any_wait);
+
+/**
+ * System Low Power Operations
+ *
+ * - ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ *		@proc_id: Processor ID.
+ *		@mode: Low power mode to enter.
+ *		@core_resume_addr: Address that core should be resumed from
+ *				   after low power transition.
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * Returns 0 for successful request, else returns corresponding error message.
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+		       uint8_t mode,
+		       uint64_t core_resume_addr);
+
+/**
+ * ti_sci_init() - Basic initialization
+ *
+ * Return: 0 if all goes good, else appropriate error message.
+ */
+int ti_sci_init(void);
+
+#endif /* TI_SCI_H */
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
new file mode 100644
index 0000000..7f1c368
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
@@ -0,0 +1,773 @@
+/*
+ * Texas Instruments System Control Interface (TISCI) Protocol
+ *
+ * Communication protocol with TI SCI hardware
+ * The system works in a message response protocol
+ * See: http://processors.wiki.ti.com/index.php/TISCI for details
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TI_SCI_PROTOCOL_H
+#define TI_SCI_PROTOCOL_H
+
+#include <stdint.h>
+
+/* Generic Messages */
+#define TI_SCI_MSG_ENABLE_WDT		0x0000
+#define TI_SCI_MSG_WAKE_RESET		0x0001
+#define TI_SCI_MSG_VERSION		0x0002
+#define TI_SCI_MSG_WAKE_REASON		0x0003
+#define TI_SCI_MSG_GOODBYE		0x0004
+#define TI_SCI_MSG_SYS_RESET		0x0005
+#define TI_SCI_MSG_QUERY_FW_CAPS	0x0022
+
+/* Device requests */
+#define TI_SCI_MSG_SET_DEVICE_STATE	0x0200
+#define TI_SCI_MSG_GET_DEVICE_STATE	0x0201
+#define TI_SCI_MSG_SET_DEVICE_RESETS	0x0202
+
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_ENTER_SLEEP		0x0301
+
+/* Clock requests */
+#define TI_SCI_MSG_SET_CLOCK_STATE	0x0100
+#define TI_SCI_MSG_GET_CLOCK_STATE	0x0101
+#define TI_SCI_MSG_SET_CLOCK_PARENT	0x0102
+#define TI_SCI_MSG_GET_CLOCK_PARENT	0x0103
+#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
+#define TI_SCI_MSG_SET_CLOCK_FREQ	0x010c
+#define TI_SCI_MSG_QUERY_CLOCK_FREQ	0x010d
+#define TI_SCI_MSG_GET_CLOCK_FREQ	0x010e
+
+/* Processor Control Messages */
+#define TISCI_MSG_PROC_REQUEST		0xc000
+#define TISCI_MSG_PROC_RELEASE		0xc001
+#define TISCI_MSG_PROC_HANDOVER		0xc005
+#define TISCI_MSG_SET_PROC_BOOT_CONFIG	0xc100
+#define TISCI_MSG_SET_PROC_BOOT_CTRL	0xc101
+#define TISCI_MSG_PROC_AUTH_BOOT_IMAGE	0xc120
+#define TISCI_MSG_GET_PROC_BOOT_STATUS	0xc400
+#define TISCI_MSG_WAIT_PROC_BOOT_STATUS	0xc401
+
+/**
+ * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
+ * @type:	Type of messages: One of TI_SCI_MSG* values
+ * @host:	Host of the message
+ * @seq:	Message identifier indicating a transfer sequence
+ * @flags:	Flag for the message
+ */
+struct ti_sci_msg_hdr {
+	uint16_t type;
+	uint8_t host;
+	uint8_t seq;
+#define TI_SCI_MSG_FLAG(val)			(1 << (val))
+#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE	0x0
+#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED		TI_SCI_MSG_FLAG(0)
+#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED	TI_SCI_MSG_FLAG(1)
+#define TI_SCI_FLAG_RESP_GENERIC_NACK		0x0
+#define TI_SCI_FLAG_RESP_GENERIC_ACK		TI_SCI_MSG_FLAG(1)
+	/* Additional Flags */
+	uint32_t flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_version_req - Request for firmware version information
+ * @hdr:	Generic header
+ *
+ * Request for TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_req_version {
+	struct ti_sci_msg_hdr hdr;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_version - Response for firmware version information
+ * @hdr:		Generic header
+ * @firmware_description: String describing the firmware
+ * @firmware_revision:	Firmware revision
+ * @abi_major:		Major version of the ABI that firmware supports
+ * @abi_minor:		Minor version of the ABI that firmware supports
+ * @sub_version:	Sub-version number of the firmware
+ * @patch_version:	Patch-version number of the firmware.
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to request TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_resp_version {
+	struct ti_sci_msg_hdr hdr;
+#define FIRMWARE_DESCRIPTION_LENGTH 32
+	char firmware_description[FIRMWARE_DESCRIPTION_LENGTH];
+	uint16_t firmware_revision;
+	uint8_t abi_major;
+	uint8_t abi_minor;
+	uint8_t sub_version;
+	uint8_t patch_version;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_reboot - Reboot the SoC
+ * @hdr:	Generic Header
+ * @domain:	Domain to be reset, 0 for full SoC reboot
+ *
+ * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_reboot {
+	struct ti_sci_msg_hdr hdr;
+#define TI_SCI_DOMAIN_FULL_SOC_RESET	0x0
+	uint8_t domain;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_fw_caps - Response for query firmware caps
+ * @hdr:	Generic header
+ * @fw_caps:	Each bit in fw_caps indicating one FW/SOC capability
+ *		MSG_FLAG_CAPS_GENERIC: Generic capability (LPM not supported)
+ *		MSG_FLAG_CAPS_LPM_DEEP_SLEEP: Deep Sleep LPM
+ *		MSG_FLAG_CAPS_LPM_MCU_ONLY: MCU only LPM
+ *		MSG_FLAG_CAPS_LPM_STANDBY: Standby LPM
+ *		MSG_FLAG_CAPS_LPM_PARTIAL_IO: Partial IO in LPM
+ *
+ * Response to a generic message with message type TI_SCI_MSG_QUERY_FW_CAPS
+ * providing currently available SOC/firmware capabilities. SoC that don't
+ * support low power modes return only MSG_FLAG_CAPS_GENERIC capability.
+ */
+struct ti_sci_msg_resp_query_fw_caps {
+	struct ti_sci_msg_hdr hdr;
+#define MSG_FLAG_CAPS_GENERIC		TI_SCI_MSG_FLAG(0)
+#define MSG_FLAG_CAPS_LPM_DEEP_SLEEP	TI_SCI_MSG_FLAG(1)
+#define MSG_FLAG_CAPS_LPM_MCU_ONLY	TI_SCI_MSG_FLAG(2)
+#define MSG_FLAG_CAPS_LPM_STANDBY	TI_SCI_MSG_FLAG(3)
+#define MSG_FLAG_CAPS_LPM_PARTIAL_IO	TI_SCI_MSG_FLAG(4)
+	uint64_t fw_caps;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_state - Set the desired state of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @reserved: Reserved space in message, must be 0 for backward compatibility
+ * @state: The desired state of the device.
+ *
+ * Certain flags can also be set to alter the device state:
+ * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source.
+ * The meaning of this flag will vary slightly from device to device and from
+ * SoC to SoC but it generally allows the device to wake the SoC out of deep
+ * suspend states.
+ * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device.
+ * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed
+ * with STATE_RETENTION or STATE_ON, it will claim the device exclusively.
+ * If another host already has this device set to STATE_RETENTION or STATE_ON,
+ * the message will fail. Once successful, other hosts attempting to set
+ * STATE_RETENTION or STATE_ON will fail.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_DEVICE_WAKE_ENABLED	TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_DEVICE_RESET_ISO	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_DEVICE_EXCLUSIVE	TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+	uint32_t reserved;
+
+#define MSG_DEVICE_SW_STATE_AUTO_OFF	0
+#define MSG_DEVICE_SW_STATE_RETENTION	1
+#define MSG_DEVICE_SW_STATE_ON		2
+	uint8_t state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_device_state - Request to get device.
+ * @hdr:		Generic header
+ * @id:		Device Identifier
+ *
+ * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state
+ * information
+ */
+struct ti_sci_msg_req_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_device_state - Response to get device request.
+ * @hdr:		Generic header
+ * @context_loss_count: Indicates how many times the device has lost context. A
+ *	driver can use this monotonic counter to determine if the device has
+ *	lost context since the last time this message was exchanged.
+ * @resets: Programmed state of the reset lines.
+ * @programmed_state:	The state as programmed by set_device.
+ *			- Uses the MSG_DEVICE_SW_* macros
+ * @current_state:	The actual state of the hardware.
+ *
+ * Response to request TI_SCI_MSG_GET_DEVICE_STATE.
+ */
+struct ti_sci_msg_resp_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t context_loss_count;
+	uint32_t resets;
+	uint8_t programmed_state;
+#define MSG_DEVICE_HW_STATE_OFF		0
+#define MSG_DEVICE_HW_STATE_ON		1
+#define MSG_DEVICE_HW_STATE_TRANS	2
+	uint8_t current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_resets - Set the desired resets
+ *				configuration of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @resets: A bit field of resets for the device. The meaning, behavior,
+ *	and usage of the reset flags are device specific. 0 for a bit
+ *	indicates releasing the reset represented by that bit while 1
+ *	indicates keeping it held.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_resets {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+	uint32_t resets;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
+ * @hdr:	Generic Header, Certain flags can be set specific to the clocks:
+ *		MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
+ *		via spread spectrum clocking.
+ *		MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
+ *		frequency to be changed while it is running so long as it
+ *		is within the min/max limits.
+ *		MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
+ *		is only applicable to clock inputs on the SoC pseudo-device.
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @request_state: Request the state for the clock to be set to.
+ *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
+ *		it can be disabled, regardless of the state of the device
+ *		MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
+ *		automatically manage the state of this clock. If the device
+ *		is enabled, then the clock is enabled. If the device is set
+ *		to off or retention, then the clock is internally set as not
+ *		being required by the device.(default)
+ *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
+ *		regardless of the state of the device.
+ *
+ * Normally, all required clocks are managed by TISCI entity, this is used
+ * only for specific control *IF* required. Auto managed state is
+ * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
+ * will explicitly control.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
+ * ACK or NACK message.
+ */
+struct ti_sci_msg_req_set_clock_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_CLOCK_ALLOW_SSC		TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_CLOCK_INPUT_TERM		TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+#define MSG_CLOCK_SW_STATE_UNREQ	0
+#define MSG_CLOCK_SW_STATE_AUTO		1
+#define MSG_CLOCK_SW_STATE_REQ		2
+	uint8_t request_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_state - Request for clock state
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get state of.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
+ * of the clock
+ */
+struct ti_sci_msg_req_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_state - Response to get clock state
+ * @hdr:	Generic Header
+ * @programmed_state: Any programmed state of the clock. This is one of
+ *		MSG_CLOCK_SW_STATE* values.
+ * @current_state: Current state of the clock. This is one of:
+ *		MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
+ *		MSG_CLOCK_HW_STATE_READY: Clock is ready
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_STATE.
+ */
+struct ti_sci_msg_resp_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t programmed_state;
+#define MSG_CLOCK_HW_STATE_NOT_READY	0
+#define MSG_CLOCK_HW_STATE_READY	1
+	uint8_t current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_parent - Set the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	The new clock parent is selectable by an index via this
+ *		parameter.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
+ * ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+	uint8_t parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_parent - Get the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get the parent for.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
+ */
+struct ti_sci_msg_req_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
+ * @hdr:	Generic Header
+ * @parent_id:	The current clock parent
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
+ */
+struct ti_sci_msg_resp_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
+ * @hdr:	Generic header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * This request provides information about how many clock parent options
+ * are available for a given clock to a device. This is typically used
+ * for input clocks.
+ *
+ * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
+ * @hdr:		Generic header
+ * @num_parents:	Number of clock parents
+ *
+ * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
+ */
+struct ti_sci_msg_resp_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t num_parents;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. A frequency will be found
+ *		as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested frequency within provided range and responds with
+ * result message.
+ *
+ * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
+ * or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint64_t min_freq_hz;
+	uint64_t target_freq_hz;
+	uint64_t max_freq_hz;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that is the best match in Hz.
+ *
+ * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
+ * cannot be satisfied, the message will be of type NACK.
+ */
+struct ti_sci_msg_resp_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint64_t freq_hz;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. The clock will be programmed
+ *		at a rate as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested range and responds with success/failure message.
+ *
+ * This sets the desired frequency for a clock within an allowable
+ * range. This message will fail on an enabled clock unless
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
+ * if other clocks have their frequency modified due to this message,
+ * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
+ *
+ * Calling set frequency on a clock input to the SoC pseudo-device will
+ * inform the PMMC of that clock's frequency. Setting a frequency of
+ * zero will indicate the clock is disabled.
+ *
+ * Calling set frequency on clock outputs from the SoC pseudo-device will
+ * function similarly to setting the clock frequency on a device.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint64_t min_freq_hz;
+	uint64_t target_freq_hz;
+	uint64_t max_freq_hz;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In some cases, clock frequencies are configured by host.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
+ * that the clock is currently at.
+ */
+struct ti_sci_msg_req_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that the clock is currently on, in Hz.
+ *
+ * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
+ */
+struct ti_sci_msg_resp_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint64_t freq_hz;
+} __packed;
+
+#define TISCI_ADDR_LOW_MASK		0x00000000ffffffff
+#define TISCI_ADDR_HIGH_MASK		0xffffffff00000000
+#define TISCI_ADDR_HIGH_SHIFT		32
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @host_id:		New Host we want to give control to
+ *
+ * Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint8_t host_id;
+} __packed;
+
+/* A53 Config Flags */
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN         0x00000001
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN      0x00000002
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN     0x00000004
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN    0x00000008
+#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32        0x00000100
+
+/* R5 Config Flags */
+#define PROC_BOOT_CFG_FLAG_R5_DBG_EN            0x00000001
+#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN         0x00000002
+#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP          0x00000100
+#define PROC_BOOT_CFG_FLAG_R5_TEINIT            0x00000200
+#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN           0x00000400
+#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE       0x00000800
+#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN           0x00001000
+#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN           0x00002000
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @bootvector_low:	Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32bit (Little Endian) of boot vector
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_proc_boot_config {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t bootvector_low;
+	uint32_t bootvector_high;
+	uint32_t config_flags_set;
+	uint32_t config_flags_clear;
+} __packed;
+
+/* ARMV8 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_ARMV8_ACINACTM      0x00000001
+#define PROC_BOOT_CTRL_FLAG_ARMV8_AINACTS       0x00000002
+#define PROC_BOOT_CTRL_FLAG_ARMV8_L2FLUSHREQ    0x00000100
+
+/* R5 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT        0x00000001
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_proc_boot_ctrl {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t control_flags_set;
+	uint32_t control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @cert_addr_low:	Lower 32bit (Little Endian) of certificate
+ * @cert_addr_high:	Higher 32bit (Little Endian) of certificate
+ *
+ * Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_proc_auth_boot_image {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t cert_addr_low;
+	uint32_t cert_addr_high;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/* ARMv8 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE			0x00000001
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI			0x00000002
+#define PROC_BOOT_STATUS_FLAG_ARMV8_L2F_DONE		0x00000010
+#define PROC_BOOT_STATUS_FLAG_ARMV8_STANDBYWFIL2	0x00000020
+
+/* R5 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_R5_WFE			0x00000001
+#define PROC_BOOT_STATUS_FLAG_R5_WFI			0x00000002
+#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED		0x00000004
+#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED	0x00000100
+
+/**
+ * \brief Processor Status Response
+ * struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @bootvector_low:	Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32bit (Little Endian) of boot vector
+ * @config_flags:	Optional Processor specific Config Flags set.
+ * @control_flags:	Optional Processor specific Control Flags.
+ * @status_flags:	Optional Processor specific Status Flags set.
+ *
+ * Response to TISCI_MSG_GET_PROC_BOOT_STATUS.
+ */
+struct ti_sci_msg_resp_get_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t bootvector_low;
+	uint32_t bootvector_high;
+	uint32_t config_flags;
+	uint32_t control_flags;
+	uint32_t status_flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_wait_proc_boot_status - Wait for a processor boot status
+ * @hdr:			Generic Header
+ * @processor_id:		ID of processor
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Request type is TISCI_MSG_WAIT_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_wait_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint8_t num_wait_iterations;
+	uint8_t num_match_iterations;
+	uint8_t delay_per_iteration_us;
+	uint8_t delay_before_iterations_us;
+	uint32_t status_flags_1_set_all_wait;
+	uint32_t status_flags_1_set_any_wait;
+	uint32_t status_flags_1_clr_all_wait;
+	uint32_t status_flags_1_clr_any_wait;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_enter_sleep - Request for TI_SCI_MSG_ENTER_SLEEP.
+ *
+ * @hdr		    Generic Header
+ * @mode	    Low power mode to enter.
+ * @proc_id	    Processor id to be restored.
+ * @core_resume_lo  Low 32-bits of physical pointer to address for core
+ *		    to begin execution upon resume.
+ * @core_resume_hi  High 32-bits of physical pointer to address for core
+ *		    to begin execution upon resume.
+ *
+ * This message is to be sent after TI_SCI_MSG_PREPARE_SLEEP is sent from OS
+ * and is what actually triggers entry into the specified low power mode.
+ */
+struct ti_sci_msg_req_enter_sleep {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t mode;
+	uint8_t processor_id;
+	uint32_t core_resume_lo;
+	uint32_t core_resume_hi;
+} __packed;
+
+#endif /* TI_SCI_PROTOCOL_H */
diff --git a/plat/ti/k3/common/k3_bl31_setup.c b/plat/ti/k3/common/k3_bl31_setup.c
new file mode 100644
index 0000000..c5f60fe
--- /dev/null
+++ b/plat/ti/k3/common/k3_bl31_setup.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <string.h>
+
+#include <platform_def.h>
+
+#include <arch.h>
+#include <arch_helpers.h>
+#include <common/bl_common.h>
+#include <common/debug.h>
+#include <lib/mmio.h>
+#include <lib/xlat_tables/xlat_tables_v2.h>
+
+#include <k3_console.h>
+#include <k3_gicv3.h>
+#include <ti_sci.h>
+
+#define ADDR_DOWN(_adr) (_adr & XLAT_ADDR_MASK(2U))
+#define SIZE_UP(_adr, _sz) (round_up((_adr + _sz), XLAT_BLOCK_SIZE(2U)) - ADDR_DOWN(_adr))
+
+#define K3_MAP_REGION_FLAT(_adr, _sz, _attr) \
+	MAP_REGION_FLAT(ADDR_DOWN(_adr), SIZE_UP(_adr, _sz), _attr)
+
+/* Table of regions to map using the MMU */
+const mmap_region_t plat_k3_mmap[] = {
+	K3_MAP_REGION_FLAT(K3_USART_BASE,       K3_USART_SIZE,       MT_DEVICE | MT_RW | MT_SECURE),
+	K3_MAP_REGION_FLAT(K3_GIC_BASE,         K3_GIC_SIZE,         MT_DEVICE | MT_RW | MT_SECURE),
+	K3_MAP_REGION_FLAT(K3_GTC_BASE,         K3_GTC_SIZE,         MT_DEVICE | MT_RW | MT_SECURE),
+	K3_MAP_REGION_FLAT(SEC_PROXY_RT_BASE,   SEC_PROXY_RT_SIZE,   MT_DEVICE | MT_RW | MT_SECURE),
+	K3_MAP_REGION_FLAT(SEC_PROXY_SCFG_BASE, SEC_PROXY_SCFG_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+	K3_MAP_REGION_FLAT(SEC_PROXY_DATA_BASE, SEC_PROXY_DATA_SIZE, MT_DEVICE | MT_RW | MT_SECURE),
+	{ /* sentinel */ }
+};
+
+/*
+ * Placeholder variables for maintaining information about the next image(s)
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+static uint32_t k3_get_spsr_for_bl33_entry(void)
+{
+	unsigned long el_status;
+	unsigned int mode;
+	uint32_t spsr;
+
+	/* Figure out what mode we enter the non-secure world in */
+	el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+	el_status &= ID_AA64PFR0_ELX_MASK;
+
+	mode = (el_status) ? MODE_EL2 : MODE_EL1;
+
+	spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+	return spsr;
+}
+
+/*******************************************************************************
+ * Perform any BL3-1 early platform setup, such as console init and deciding on
+ * memory layout.
+ ******************************************************************************/
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	/* Initialize the console to provide early debug support */
+	k3_console_setup();
+
+#ifdef BL32_BASE
+	/* Populate entry point information for BL32 */
+	SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
+	bl32_image_ep_info.pc = BL32_BASE;
+	bl32_image_ep_info.spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
+					  DISABLE_ALL_EXCEPTIONS);
+	SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+#endif
+
+	/* Populate entry point information for BL33 */
+	SET_PARAM_HEAD(&bl33_image_ep_info, PARAM_EP, VERSION_1, 0);
+	bl33_image_ep_info.pc = PRELOADED_BL33_BASE;
+	bl33_image_ep_info.spsr = k3_get_spsr_for_bl33_entry();
+	SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#ifdef K3_HW_CONFIG_BASE
+	/*
+	 * According to the file ``Documentation/arm64/booting.txt`` of the
+	 * Linux kernel tree, Linux expects the physical address of the device
+	 * tree blob (DTB) in x0, while x1-x3 are reserved for future use and
+	 * must be 0.
+	 */
+	bl33_image_ep_info.args.arg0 = (u_register_t)K3_HW_CONFIG_BASE;
+	bl33_image_ep_info.args.arg1 = 0U;
+	bl33_image_ep_info.args.arg2 = 0U;
+	bl33_image_ep_info.args.arg3 = 0U;
+#endif
+}
+
+void bl31_plat_arch_setup(void)
+{
+	const mmap_region_t bl_regions[] = {
+		MAP_REGION_FLAT(BL31_START,           BL31_SIZE,			          MT_MEMORY  | MT_RW | MT_SECURE),
+		MAP_REGION_FLAT(BL_CODE_BASE,         BL_CODE_END         - BL_CODE_BASE,         MT_CODE    | MT_RO | MT_SECURE),
+		MAP_REGION_FLAT(BL_RO_DATA_BASE,      BL_RO_DATA_END      - BL_RO_DATA_BASE,      MT_RO_DATA | MT_RO | MT_SECURE),
+#if USE_COHERENT_MEM
+		MAP_REGION_FLAT(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, MT_DEVICE  | MT_RW | MT_SECURE),
+#endif
+		{ /* sentinel */ }
+	};
+
+	setup_page_tables(bl_regions, plat_k3_mmap);
+	enable_mmu_el3(0);
+}
+
+void bl31_platform_setup(void)
+{
+	k3_gic_driver_init(K3_GIC_BASE);
+	k3_gic_init();
+
+	ti_sci_init();
+}
+
+void platform_mem_init(void)
+{
+	/* Do nothing for now... */
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	uint32_t gtc_freq;
+	uint32_t gtc_ctrl;
+
+	/* Lets try and provide basic diagnostics - cost is low */
+	gtc_ctrl = mmio_read_32(K3_GTC_BASE + K3_GTC_CNTCR_OFFSET);
+	/* Did the bootloader fail to enable timer and OS guys are confused? */
+	if ((gtc_ctrl & K3_GTC_CNTCR_EN_MASK) == 0U) {
+		ERROR("GTC is disabled! Timekeeping broken. Fix Bootloader\n");
+	}
+	/*
+	 * If debug will not pause time, we will have issues like
+	 * drivers timing out while debugging, in cases of OS like Linux,
+	 * RCU stall errors, which can be hard to differentiate vs real issues.
+	 */
+	if ((gtc_ctrl & K3_GTC_CNTCR_HDBG_MASK) == 0U) {
+		WARN("GTC: Debug access doesn't stop time. Fix Bootloader\n");
+	}
+
+	gtc_freq = mmio_read_32(K3_GTC_BASE + K3_GTC_CNTFID0_OFFSET);
+	/* Many older bootloaders may have missed programming FID0 register */
+	if (gtc_freq != 0U) {
+		return gtc_freq;
+	}
+
+	/*
+	 * We could have just warned about this, but this can have serious
+	 * hard to debug side effects if we are NOT sure what the actual
+	 * frequency is. Lets make sure people don't miss this.
+	 */
+	ERROR("GTC_CNTFID0 is 0! Assuming %d Hz. Fix Bootloader\n",
+	      SYS_COUNTER_FREQ_IN_TICKS);
+
+	return SYS_COUNTER_FREQ_IN_TICKS;
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image
+ * for the security state specified. BL3-3 corresponds to the non-secure
+ * image type while BL3-2 corresponds to the secure image type. A NULL
+ * pointer is returned if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	entry_point_info_t *next_image_info;
+
+	assert(sec_state_is_valid(type));
+	next_image_info = (type == NON_SECURE) ? &bl33_image_ep_info :
+						 &bl32_image_ep_info;
+	/*
+	 * None of the images on the ARM development platforms can have 0x0
+	 * as the entrypoint
+	 */
+	if (next_image_info->pc)
+		return next_image_info;
+
+	NOTICE("Requested nonexistent image\n");
+	return NULL;
+}
diff --git a/plat/ti/k3/common/k3_console.c b/plat/ti/k3/common/k3_console.c
new file mode 100644
index 0000000..1b01c9b
--- /dev/null
+++ b/plat/ti/k3/common/k3_console.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <drivers/console.h>
+#include <drivers/ti/uart/uart_16550.h>
+
+#include <k3_console.h>
+
+void k3_console_setup(void)
+{
+	static console_t console;
+
+	console_16550_register(K3_USART_BASE, K3_USART_CLK_SPEED,
+			       K3_USART_BAUD, &console);
+
+	console_set_scope(&console, CONSOLE_FLAG_BOOT |
+				    CONSOLE_FLAG_RUNTIME |
+				    CONSOLE_FLAG_CRASH);
+}
diff --git a/plat/ti/k3/common/k3_gicv3.c b/plat/ti/k3/common/k3_gicv3.c
new file mode 100644
index 0000000..eda9430
--- /dev/null
+++ b/plat/ti/k3/common/k3_gicv3.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <assert.h>
+#include <common/bl_common.h>
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv3.h>
+#include <lib/utils.h>
+#include <lib/mmio.h>
+#include <plat/common/platform.h>
+
+#include <k3_gicv3.h>
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+uintptr_t rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+static gicv3_redist_ctx_t rdist_ctx[PLATFORM_CORE_COUNT];
+static gicv3_dist_ctx_t dist_ctx;
+
+static const interrupt_prop_t k3_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
+};
+
+static unsigned int k3_mpidr_to_core_pos(unsigned long mpidr)
+{
+	return (unsigned int)plat_core_pos_by_mpidr(mpidr);
+}
+
+gicv3_driver_data_t k3_gic_data = {
+	.rdistif_num = PLATFORM_CORE_COUNT,
+	.rdistif_base_addrs = rdistif_base_addrs,
+	.interrupt_props = k3_interrupt_props,
+	.interrupt_props_num = ARRAY_SIZE(k3_interrupt_props),
+	.mpidr_to_core_pos = k3_mpidr_to_core_pos,
+};
+
+void k3_gic_driver_init(uintptr_t gic_base)
+{
+	/* GIC Distributor is always at the base of the IP */
+	uintptr_t gicd_base = gic_base;
+	/* GIC Redistributor base is run-time detected */
+	uintptr_t gicr_base = 0;
+
+	for (unsigned int gicr_shift = 18; gicr_shift < 21; gicr_shift++) {
+		uintptr_t gicr_check = gic_base + BIT(gicr_shift);
+		uint32_t iidr = mmio_read_32(gicr_check + GICR_IIDR);
+		if (iidr != 0) {
+			/* Found the GICR base */
+			gicr_base = gicr_check;
+			break;
+		}
+	}
+	/* Assert if we have not found the GICR base */
+	assert(gicr_base != 0);
+
+	/*
+	 * The GICv3 driver is initialized in EL3 and does not need
+	 * to be initialized again in SEL1. This is because the S-EL1
+	 * can use GIC system registers to manage interrupts and does
+	 * not need GIC interface base addresses to be configured.
+	 */
+	k3_gic_data.gicd_base = gicd_base;
+	k3_gic_data.gicr_base = gicr_base;
+	gicv3_driver_init(&k3_gic_data);
+}
+
+void k3_gic_init(void)
+{
+	gicv3_distif_init();
+	gicv3_rdistif_init(plat_my_core_pos());
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void k3_gic_cpuif_enable(void)
+{
+	gicv3_cpuif_enable(plat_my_core_pos());
+}
+
+void k3_gic_cpuif_disable(void)
+{
+	gicv3_cpuif_disable(plat_my_core_pos());
+}
+
+void k3_gic_pcpu_init(void)
+{
+	gicv3_rdistif_init(plat_my_core_pos());
+}
+
+void k3_gic_save_context(void)
+{
+	for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+		gicv3_rdistif_save(i, &rdist_ctx[i]);
+	}
+	gicv3_distif_save(&dist_ctx);
+}
+
+void k3_gic_restore_context(void)
+{
+	gicv3_distif_init_restore(&dist_ctx);
+	for (unsigned int i = 0U; i < PLATFORM_CORE_COUNT; i++) {
+		gicv3_rdistif_init_restore(i, &rdist_ctx[i]);
+	}
+}
diff --git a/plat/ti/k3/common/k3_helpers.S b/plat/ti/k3/common/k3_helpers.S
new file mode 100644
index 0000000..f997b46
--- /dev/null
+++ b/plat/ti/k3/common/k3_helpers.S
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <cortex_a72.h>
+#include <cpu_macros.S>
+#include <platform_def.h>
+
+#define K3_BOOT_REASON_COLD_RESET 0x1
+
+	/* ------------------------------------------------------------------
+	 *  uintptr_t plat_get_my_entrypoint(void)
+	 * ------------------------------------------------------------------
+	 *
+	 * This function is called with the called with the MMU and caches
+	 * disabled (SCTLR_EL3.M = 0 and SCTLR_EL3.C = 0). The function is
+	 * responsible for distinguishing between a warm and cold reset for the
+	 * current CPU using platform-specific means. If it's a warm reset,
+	 * then it returns the warm reset entrypoint point provided to
+	 * plat_setup_psci_ops() during BL31 initialization. If it's a cold
+	 * reset then this function must return zero.
+	 *
+	 * This function does not follow the Procedure Call Standard used by
+	 * the Application Binary Interface for the ARM 64-bit architecture.
+	 * The caller should not assume that callee saved registers are
+	 * preserved across a call to this function.
+	 */
+	.globl	plat_get_my_entrypoint
+func plat_get_my_entrypoint
+	ldr x0, k3_boot_reason_data_store
+	cmp  x0, #K3_BOOT_REASON_COLD_RESET
+
+	/* We ONLY support cold boot at this point */
+	bne plat_unsupported_boot
+	mov	x0, #0
+	ret
+
+	/*
+	 * We self manage our boot reason.
+	 * At load time, we have just a default reason - which is cold reset
+	 */
+k3_boot_reason_data_store:
+	.word	K3_BOOT_REASON_COLD_RESET
+
+plat_unsupported_boot:
+	b plat_unsupported_boot
+
+endfunc plat_get_my_entrypoint
+
+	/* ------------------------------------------------------------------
+	 * unsigned int plat_my_core_pos(void)
+	 * ------------------------------------------------------------------
+	 *
+	 * This function returns the index of the calling CPU which is used as a
+	 * CPU-specific linear index into blocks of memory (for example while
+	 * allocating per-CPU stacks). This function will be invoked very early
+	 * in the initialization sequence which mandates that this function
+	 * should be implemented in assembly and should not rely on the
+	 * avalability of a C runtime environment. This function can clobber x0
+	 * - x8 and must preserve x9 - x29.
+	 *
+	 * This function plays a crucial role in the power domain topology
+	 * framework in PSCI and details of this can be found in Power Domain
+	 * Topology Design.
+	 */
+	.globl plat_my_core_pos
+func plat_my_core_pos
+	mrs	x0, MPIDR_EL1
+
+	and	x1, x0, #MPIDR_CLUSTER_MASK
+	lsr	x1, x1, #MPIDR_AFF1_SHIFT
+	and	x0, x0, #MPIDR_CPU_MASK
+
+	cmp	x1, 0
+	b.eq out
+	add	x0, x0, #K3_CLUSTER0_CORE_COUNT
+
+	cmp	x1, 1
+	b.eq out
+	add	x0, x0, #K3_CLUSTER1_CORE_COUNT
+
+	cmp	x1, 2
+	b.eq out
+	add	x0, x0, #K3_CLUSTER2_CORE_COUNT
+
+out:
+	ret
+endfunc plat_my_core_pos
+
+	/* --------------------------------------------------------------------
+	 * This handler does the following:
+	 * - Set the L2 Data RAM latency to 2 (i.e. 3 cycles) for Cortex-A72
+	 * --------------------------------------------------------------------
+	 */
+	.globl plat_reset_handler
+func plat_reset_handler
+	/* Only on Cortex-A72 */
+	jump_if_cpu_midr CORTEX_A72_MIDR, a72
+	ret
+
+	/* Cortex-A72 specific settings */
+a72:
+	mrs x0, CORTEX_A72_L2CTLR_EL1
+#if K3_DATA_RAM_4_LATENCY
+	/* Set L2 cache data RAM latency to 4 cycles */
+	orr x0, x0, #(CORTEX_A72_L2_DATA_RAM_LATENCY_4_CYCLES << \
+			CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT)
+#else
+	/* Set L2 cache data RAM latency to 3 cycles */
+	orr x0, x0, #(CORTEX_A72_L2_DATA_RAM_LATENCY_3_CYCLES << \
+			CORTEX_A72_L2CTLR_DATA_RAM_LATENCY_SHIFT)
+#endif
+	/* Enable L2 ECC and parity with inline data */
+	orr x0, x0, #CORTEX_A72_L2CTLR_EL1_ECC_AND_PARITY_ENABLE
+	orr x0, x0, #CORTEX_A72_L2CTLR_EL1_DATA_INLINE_ECC_ENABLE
+	msr CORTEX_A72_L2CTLR_EL1, x0
+
+	mrs x0, CORTEX_A72_L2ACTLR_EL1
+	/* Enable L2 UniqueClean evictions with data */
+	orr x0, x0, #CORTEX_A72_L2ACTLR_ENABLE_UNIQUE_CLEAN
+	msr CORTEX_A72_L2ACTLR_EL1, x0
+
+#if K3_EXCLUSIVE_SNOOP_DELAY
+	mrs	x0, CORTEX_A72_CPUACTLR_EL1
+	/* Set Snoop-delayed exclusive handling */
+	orr	x0, x0, #CORTEX_A72_CPUACTLR_EL1_DELAY_EXCLUSIVE_SNOOP
+	msr	CORTEX_A72_CPUACTLR_EL1, x0
+#endif
+
+	isb
+	ret
+endfunc plat_reset_handler
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_init(void)
+	 * Function to initialize the crash console
+	 * without a C Runtime to print crash report.
+	 * Clobber list : x0 - x4
+	 * ---------------------------------------------
+	 */
+	.globl plat_crash_console_init
+func plat_crash_console_init
+	mov_imm	x0, CRASH_CONSOLE_BASE
+	mov_imm	x1, CRASH_CONSOLE_CLK
+	mov_imm	x2, CRASH_CONSOLE_BAUD_RATE
+	mov w3, #0x0
+	b	console_16550_core_init
+endfunc plat_crash_console_init
+
+	/* ---------------------------------------------
+	 * int plat_crash_console_putc(void)
+	 * Function to print a character on the crash
+	 * console without a C Runtime.
+	 * Clobber list : x1, x2
+	 * ---------------------------------------------
+	 */
+	.globl plat_crash_console_putc
+func plat_crash_console_putc
+	mov_imm	x1, CRASH_CONSOLE_BASE
+	b	console_16550_core_putc
+endfunc plat_crash_console_putc
+
+	/* ---------------------------------------------
+	 * void plat_crash_console_flush()
+	 * Function to force a write of all buffered
+	 * data that hasn't been output.
+	 * Out : void.
+	 * Clobber list : x0, x1
+	 * ---------------------------------------------
+	 */
+	.globl plat_crash_console_flush
+func plat_crash_console_flush
+	mov_imm	x0, CRASH_CONSOLE_BASE
+	b	console_16550_core_flush
+endfunc plat_crash_console_flush
diff --git a/plat/ti/k3/common/k3_psci.c b/plat/ti/k3/common/k3_psci.c
new file mode 100644
index 0000000..e8d73db
--- /dev/null
+++ b/plat/ti/k3/common/k3_psci.c
@@ -0,0 +1,309 @@
+/*
+ * Copyright (c) 2017-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdbool.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <lib/el3_runtime/cpu_data.h>
+#include <lib/psci/psci.h>
+#include <plat/common/platform.h>
+
+#include <ti_sci_protocol.h>
+#include <k3_gicv3.h>
+#include <ti_sci.h>
+
+#define CORE_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL0])
+#define CLUSTER_PWR_STATE(state) ((state)->pwr_domain_state[MPIDR_AFFLVL1])
+#define SYSTEM_PWR_STATE(state) ((state)->pwr_domain_state[PLAT_MAX_PWR_LVL])
+
+uintptr_t k3_sec_entrypoint;
+
+static void k3_cpu_standby(plat_local_state_t cpu_state)
+{
+	u_register_t scr;
+
+	scr = read_scr_el3();
+	/* Enable the Non secure interrupt to wake the CPU */
+	write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
+	isb();
+	/* dsb is good practice before using wfi to enter low power states */
+	dsb();
+	/* Enter standby state */
+	wfi();
+	/* Restore SCR */
+	write_scr_el3(scr);
+}
+
+static int k3_pwr_domain_on(u_register_t mpidr)
+{
+	int core, proc_id, device_id, ret;
+
+	core = plat_core_pos_by_mpidr(mpidr);
+	if (core < 0) {
+		ERROR("Could not get target core id: %d\n", core);
+		return PSCI_E_INTERN_FAIL;
+	}
+
+	proc_id = PLAT_PROC_START_ID + core;
+	device_id = PLAT_PROC_DEVICE_START_ID + core;
+
+	ret = ti_sci_proc_request(proc_id);
+	if (ret) {
+		ERROR("Request for processor failed: %d\n", ret);
+		return PSCI_E_INTERN_FAIL;
+	}
+
+	ret = ti_sci_proc_set_boot_cfg(proc_id, k3_sec_entrypoint, 0, 0);
+	if (ret) {
+		ERROR("Request to set core boot address failed: %d\n", ret);
+		return PSCI_E_INTERN_FAIL;
+	}
+
+	/* sanity check these are off before starting a core */
+	ret = ti_sci_proc_set_boot_ctrl(proc_id,
+			0, PROC_BOOT_CTRL_FLAG_ARMV8_L2FLUSHREQ |
+			   PROC_BOOT_CTRL_FLAG_ARMV8_AINACTS |
+			   PROC_BOOT_CTRL_FLAG_ARMV8_ACINACTM);
+	if (ret) {
+		ERROR("Request to clear boot configuration failed: %d\n", ret);
+		return PSCI_E_INTERN_FAIL;
+	}
+
+	ret = ti_sci_device_get(device_id);
+	if (ret) {
+		ERROR("Request to start core failed: %d\n", ret);
+		return PSCI_E_INTERN_FAIL;
+	}
+
+	return PSCI_E_SUCCESS;
+}
+
+void k3_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	int core, cluster, proc_id, device_id, cluster_id, ret;
+
+	/* At very least the local core should be powering down */
+	assert(CORE_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE);
+
+	/* Prevent interrupts from spuriously waking up this cpu */
+	k3_gic_cpuif_disable();
+
+	core = plat_my_core_pos();
+	cluster = MPIDR_AFFLVL1_VAL(read_mpidr_el1());
+	proc_id = PLAT_PROC_START_ID + core;
+	device_id = PLAT_PROC_DEVICE_START_ID + core;
+	cluster_id = PLAT_CLUSTER_DEVICE_START_ID + (cluster * 2);
+
+	/*
+	 * If we are the last core in the cluster then we take a reference to
+	 * the cluster device so that it does not get shutdown before we
+	 * execute the entire cluster L2 cleaning sequence below.
+	 */
+	if (CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
+		ret = ti_sci_device_get(cluster_id);
+		if (ret) {
+			ERROR("Request to get cluster failed: %d\n", ret);
+			return;
+		}
+	}
+
+	/* Start by sending wait for WFI command */
+	ret = ti_sci_proc_wait_boot_status_no_wait(proc_id,
+			/*
+			 * Wait maximum time to give us the best chance to get
+			 * to WFI before this command timeouts
+			 */
+			UINT8_MAX, 100, UINT8_MAX, UINT8_MAX,
+			/* Wait for WFI */
+			PROC_BOOT_STATUS_FLAG_ARMV8_WFI, 0, 0, 0);
+	if (ret) {
+		ERROR("Sending wait for WFI failed (%d)\n", ret);
+		return;
+	}
+
+	/* Now queue up the core shutdown request */
+	ret = ti_sci_device_put_no_wait(device_id);
+	if (ret) {
+		ERROR("Sending core shutdown message failed (%d)\n", ret);
+		return;
+	}
+
+	/* If our cluster is not going down we stop here */
+	if (CLUSTER_PWR_STATE(target_state) != PLAT_MAX_OFF_STATE)
+		return;
+
+	/* set AINACTS */
+	ret = ti_sci_proc_set_boot_ctrl_no_wait(proc_id,
+			PROC_BOOT_CTRL_FLAG_ARMV8_AINACTS, 0);
+	if (ret) {
+		ERROR("Sending set control message failed (%d)\n", ret);
+		return;
+	}
+
+	/* set L2FLUSHREQ */
+	ret = ti_sci_proc_set_boot_ctrl_no_wait(proc_id,
+			PROC_BOOT_CTRL_FLAG_ARMV8_L2FLUSHREQ, 0);
+	if (ret) {
+		ERROR("Sending set control message failed (%d)\n", ret);
+		return;
+	}
+
+	/* wait for L2FLUSHDONE*/
+	ret = ti_sci_proc_wait_boot_status_no_wait(proc_id,
+			UINT8_MAX, 2, UINT8_MAX, UINT8_MAX,
+			PROC_BOOT_STATUS_FLAG_ARMV8_L2F_DONE, 0, 0, 0);
+	if (ret) {
+		ERROR("Sending wait message failed (%d)\n", ret);
+		return;
+	}
+
+	/* clear L2FLUSHREQ */
+	ret = ti_sci_proc_set_boot_ctrl_no_wait(proc_id,
+			0, PROC_BOOT_CTRL_FLAG_ARMV8_L2FLUSHREQ);
+	if (ret) {
+		ERROR("Sending set control message failed (%d)\n", ret);
+		return;
+	}
+
+	/* set ACINACTM */
+	ret = ti_sci_proc_set_boot_ctrl_no_wait(proc_id,
+			PROC_BOOT_CTRL_FLAG_ARMV8_ACINACTM, 0);
+	if (ret) {
+		ERROR("Sending set control message failed (%d)\n", ret);
+		return;
+	}
+
+	/* wait for STANDBYWFIL2 */
+	ret = ti_sci_proc_wait_boot_status_no_wait(proc_id,
+			UINT8_MAX, 2, UINT8_MAX, UINT8_MAX,
+			PROC_BOOT_STATUS_FLAG_ARMV8_STANDBYWFIL2, 0, 0, 0);
+	if (ret) {
+		ERROR("Sending wait message failed (%d)\n", ret);
+		return;
+	}
+
+	/* Now queue up the cluster shutdown request */
+	ret = ti_sci_device_put_no_wait(cluster_id);
+	if (ret) {
+		ERROR("Sending cluster shutdown message failed (%d)\n", ret);
+		return;
+	}
+}
+
+void k3_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	/* TODO: Indicate to System firmware about completion */
+
+	k3_gic_pcpu_init();
+	k3_gic_cpuif_enable();
+}
+
+static void __dead2 k3_system_off(void)
+{
+	int ret;
+
+	/* Queue up the system shutdown request */
+	ret = ti_sci_device_put_no_wait(PLAT_BOARD_DEVICE_ID);
+	if (ret != 0) {
+		ERROR("Sending system shutdown message failed (%d)\n", ret);
+	}
+
+	while (true)
+		wfi();
+}
+
+static void __dead2 k3_system_reset(void)
+{
+	/* Send the system reset request to system firmware */
+	ti_sci_core_reboot();
+
+	while (true)
+		wfi();
+}
+
+static int k3_validate_power_state(unsigned int power_state,
+				   psci_power_state_t *req_state)
+{
+	/* TODO: perform the proper validation */
+
+	return PSCI_E_SUCCESS;
+}
+
+static void k3_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	unsigned int core, proc_id;
+
+	core = plat_my_core_pos();
+	proc_id = PLAT_PROC_START_ID + core;
+
+	/* Prevent interrupts from spuriously waking up this cpu */
+	k3_gic_cpuif_disable();
+	k3_gic_save_context();
+
+	k3_pwr_domain_off(target_state);
+
+	ti_sci_enter_sleep(proc_id, 0, k3_sec_entrypoint);
+}
+
+static void k3_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	k3_gic_restore_context();
+	k3_gic_cpuif_enable();
+}
+
+static void k3_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+	unsigned int i;
+
+	/* CPU & cluster off, system in retention */
+	for (i = MPIDR_AFFLVL0; i <= PLAT_MAX_PWR_LVL; i++) {
+		req_state->pwr_domain_state[i] = PLAT_MAX_OFF_STATE;
+	}
+}
+
+static plat_psci_ops_t k3_plat_psci_ops = {
+	.cpu_standby = k3_cpu_standby,
+	.pwr_domain_on = k3_pwr_domain_on,
+	.pwr_domain_off = k3_pwr_domain_off,
+	.pwr_domain_on_finish = k3_pwr_domain_on_finish,
+	.pwr_domain_suspend = k3_pwr_domain_suspend,
+	.pwr_domain_suspend_finish = k3_pwr_domain_suspend_finish,
+	.get_sys_suspend_power_state = k3_get_sys_suspend_power_state,
+	.system_off = k3_system_off,
+	.system_reset = k3_system_reset,
+	.validate_power_state = k3_validate_power_state,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+			const plat_psci_ops_t **psci_ops)
+{
+	uint64_t fw_caps = 0;
+	int ret;
+
+	k3_sec_entrypoint = sec_entrypoint;
+
+	ret = ti_sci_query_fw_caps(&fw_caps);
+	if (ret) {
+		ERROR("Unable to query firmware capabilities (%d)\n", ret);
+	}
+
+	/* If firmware does not support any known suspend mode */
+	if (!(fw_caps & (MSG_FLAG_CAPS_LPM_DEEP_SLEEP |
+			 MSG_FLAG_CAPS_LPM_MCU_ONLY |
+			 MSG_FLAG_CAPS_LPM_STANDBY |
+			 MSG_FLAG_CAPS_LPM_PARTIAL_IO))) {
+		/* Disable PSCI suspend support */
+		k3_plat_psci_ops.pwr_domain_suspend = NULL;
+		k3_plat_psci_ops.pwr_domain_suspend_finish = NULL;
+		k3_plat_psci_ops.get_sys_suspend_power_state = NULL;
+	}
+
+	*psci_ops = &k3_plat_psci_ops;
+
+	return 0;
+}
diff --git a/plat/ti/k3/common/k3_topology.c b/plat/ti/k3/common/k3_topology.c
new file mode 100644
index 0000000..139f1fd
--- /dev/null
+++ b/plat/ti/k3/common/k3_topology.c
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <platform_def.h>
+
+#include <lib/psci/psci.h>
+
+/* The power domain tree descriptor */
+static unsigned char power_domain_tree_desc[] = {
+	PLATFORM_SYSTEM_COUNT,
+	PLATFORM_CLUSTER_COUNT,
+	K3_CLUSTER0_CORE_COUNT,
+	K3_CLUSTER1_CORE_COUNT,
+	K3_CLUSTER2_CORE_COUNT,
+	K3_CLUSTER3_CORE_COUNT,
+};
+
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	return power_domain_tree_desc;
+}
+
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int cluster = MPIDR_AFFLVL1_VAL(mpidr);
+	unsigned int core = MPIDR_AFFLVL0_VAL(mpidr);
+
+	if (MPIDR_AFFLVL3_VAL(mpidr) > 0 ||
+	    MPIDR_AFFLVL2_VAL(mpidr) > 0) {
+		return -1;
+	}
+
+	if (cluster > 0)
+		core += K3_CLUSTER0_CORE_COUNT;
+	if (cluster > 1)
+		core += K3_CLUSTER1_CORE_COUNT;
+	if (cluster > 2)
+		core += K3_CLUSTER2_CORE_COUNT;
+	if (cluster > 3)
+		return -1;
+
+	return core;
+}
diff --git a/plat/ti/k3/common/plat_common.mk b/plat/ti/k3/common/plat_common.mk
new file mode 100644
index 0000000..23efa31
--- /dev/null
+++ b/plat/ti/k3/common/plat_common.mk
@@ -0,0 +1,90 @@
+#
+# Copyright (c) 2017-2022, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# We don't use BL1 or BL2, so BL31 is the first image to execute
+RESET_TO_BL31		:=	1
+# Only one core starts up at first
+COLD_BOOT_SINGLE_CPU	:=	1
+# We can choose where a core starts executing
+PROGRAMMABLE_RESET_ADDRESS:=	1
+
+# ARM coherency is managed in hardware
+WARMBOOT_ENABLE_DCACHE_EARLY :=	1
+
+# A53 erratum for SoC. (enable them all)
+ERRATA_A53_826319	:=	1
+ERRATA_A53_835769	:=	1
+ERRATA_A53_836870	:=	1
+ERRATA_A53_843419	:=	1
+ERRATA_A53_855873	:=	1
+ERRATA_A53_1530924	:=	1
+
+# A72 Erratum for SoC
+ERRATA_A72_859971	:=	1
+ERRATA_A72_1319367	:=	1
+
+CRASH_REPORTING		:= 1
+
+# Split out RO data into a non-executable section
+SEPARATE_CODE_AND_RODATA :=    1
+
+# Generate a Position Independent Executable
+ENABLE_PIE		:=	1
+
+TI_16550_MDR_QUIRK	:=	1
+$(eval $(call add_define,TI_16550_MDR_QUIRK))
+
+K3_USART		:=	0
+$(eval $(call add_define,K3_USART))
+
+# Allow customizing the UART baud rate
+K3_USART_BAUD		:=	115200
+$(eval $(call add_define,K3_USART_BAUD))
+
+# Libraries
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_INCLUDES		+=	\
+				-I${PLAT_PATH}/include			\
+				-I${PLAT_PATH}/common/drivers/sec_proxy	\
+				-I${PLAT_PATH}/common/drivers/ti_sci	\
+
+K3_CONSOLE_SOURCES	+=	\
+				drivers/ti/uart/aarch64/16550_console.S	\
+				${PLAT_PATH}/common/k3_console.c	\
+
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+K3_GIC_SOURCES		+=	\
+				${GICV3_SOURCES}			\
+				plat/common/plat_gicv3.c		\
+				${PLAT_PATH}/common/k3_gicv3.c		\
+
+K3_PSCI_SOURCES		+=	\
+				plat/common/plat_psci_common.c		\
+				${PLAT_PATH}/common/k3_psci.c		\
+
+K3_SEC_PROXY_SOURCES	+=	\
+				${PLAT_PATH}/common/drivers/sec_proxy/sec_proxy.c \
+
+K3_TI_SCI_SOURCES	+=	\
+				${PLAT_PATH}/common/drivers/ti_sci/ti_sci.c \
+
+PLAT_BL_COMMON_SOURCES	+=	\
+				lib/cpus/aarch64/cortex_a53.S		\
+				lib/cpus/aarch64/cortex_a72.S		\
+				${XLAT_TABLES_LIB_SRCS}			\
+				${K3_CONSOLE_SOURCES}			\
+
+BL31_SOURCES		+=	\
+				${PLAT_PATH}/common/k3_bl31_setup.c	\
+				${PLAT_PATH}/common/k3_helpers.S	\
+				${PLAT_PATH}/common/k3_topology.c	\
+				${K3_GIC_SOURCES}			\
+				${K3_PSCI_SOURCES}			\
+				${K3_SEC_PROXY_SOURCES}			\
+				${K3_TI_SCI_SOURCES}			\
diff --git a/plat/ti/k3/include/k3_console.h b/plat/ti/k3/include/k3_console.h
new file mode 100644
index 0000000..51b322c
--- /dev/null
+++ b/plat/ti/k3/include/k3_console.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef K3_CONSOLE_H
+#define K3_CONSOLE_H
+
+void k3_console_setup(void);
+
+#endif /* K3_CONSOLE_H */
diff --git a/plat/ti/k3/include/k3_gicv3.h b/plat/ti/k3/include/k3_gicv3.h
new file mode 100644
index 0000000..2c68a75
--- /dev/null
+++ b/plat/ti/k3/include/k3_gicv3.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef K3_GICV3_H
+#define K3_GICV3_H
+
+#include <stdint.h>
+
+void k3_gic_driver_init(uintptr_t gic_base);
+void k3_gic_init(void);
+void k3_gic_cpuif_enable(void);
+void k3_gic_cpuif_disable(void);
+void k3_gic_pcpu_init(void);
+void k3_gic_save_context(void);
+void k3_gic_restore_context(void);
+
+#endif /* K3_GICV3_H */
diff --git a/plat/ti/k3/include/plat_macros.S b/plat/ti/k3/include/plat_macros.S
new file mode 100644
index 0000000..38056b5
--- /dev/null
+++ b/plat/ti/k3/include/plat_macros.S
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant platform registers
+	 * whenever an unhandled exception is taken in
+	 * BL31.
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	/* STUB */
+	.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/ti/k3/include/platform_def.h b/plat/ti/k3/include/platform_def.h
new file mode 100644
index 0000000..a2cc62d
--- /dev/null
+++ b/plat/ti/k3/include/platform_def.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <arch.h>
+#include <plat/common/common_def.h>
+
+#include <board_def.h>
+
+/*******************************************************************************
+ * Generic platform constants
+ ******************************************************************************/
+
+/* Size of cacheable stack */
+#if IMAGE_BL31
+#define PLATFORM_STACK_SIZE		0x800
+#else
+#define PLATFORM_STACK_SIZE		0x1000
+#endif
+
+#define PLATFORM_SYSTEM_COUNT		1
+#define PLATFORM_CORE_COUNT		(K3_CLUSTER0_CORE_COUNT + \
+					K3_CLUSTER1_CORE_COUNT + \
+					K3_CLUSTER2_CORE_COUNT + \
+					K3_CLUSTER3_CORE_COUNT)
+
+#define PLATFORM_CLUSTER_COUNT		((K3_CLUSTER0_CORE_COUNT != 0) + \
+					(K3_CLUSTER1_CORE_COUNT != 0) + \
+					(K3_CLUSTER2_CORE_COUNT != 0) + \
+					(K3_CLUSTER3_CORE_COUNT != 0))
+
+#define PLAT_NUM_PWR_DOMAINS		(PLATFORM_SYSTEM_COUNT + \
+					PLATFORM_CLUSTER_COUNT + \
+					PLATFORM_CORE_COUNT)
+#define PLAT_MAX_PWR_LVL		MPIDR_AFFLVL2
+#define PLAT_MAX_OFF_STATE		U(2)
+#define PLAT_MAX_RET_STATE		U(1)
+
+/*******************************************************************************
+ * Memory layout constants
+ ******************************************************************************/
+
+/*
+ * This RAM will be used for the bootloader including code, bss, and stacks.
+ * It may need to be increased if BL31 grows in size.
+ *
+ * The link addresses are determined by BL31_BASE + offset.
+ * When ENABLE_PIE is set, the TF images can be loaded anywhere, so
+ * BL31_BASE is really arbitrary.
+ *
+ * When ENABLE_PIE is unset, BL31_BASE should be chosen so that
+ * it matches to the physical address where BL31 is loaded, that is,
+ * BL31_BASE should be the base address of the RAM region.
+ *
+ * Lets make things explicit by mapping BL31_BASE to 0x0 since ENABLE_PIE is
+ * defined as default for our platform.
+ */
+#define BL31_BASE	UL(0x00000000) /* PIE remapped on fly */
+#define BL31_SIZE	UL(0x00020000) /* 128k */
+#define BL31_LIMIT	(BL31_BASE + BL31_SIZE)
+
+/*
+ * Defines the maximum number of translation tables that are allocated by the
+ * translation table library code. To minimize the amount of runtime memory
+ * used, choose the smallest value needed to map the required virtual addresses
+ * for each BL stage.
+ */
+#define MAX_XLAT_TABLES		4
+
+/*
+ * Defines the maximum number of regions that are allocated by the translation
+ * table library code. A region consists of physical base address, virtual base
+ * address, size and attributes (Device/Memory, RO/RW, Secure/Non-Secure), as
+ * defined in the `mmap_region_t` structure. The platform defines the regions
+ * that should be mapped. Then, the translation table library will create the
+ * corresponding tables and descriptors at runtime. To minimize the amount of
+ * runtime memory used, choose the smallest value needed to register the
+ * required regions for each BL stage.
+ */
+#if USE_COHERENT_MEM
+#define MAX_MMAP_REGIONS	11
+#else
+#define MAX_MMAP_REGIONS	10
+#endif
+
+/*
+ * Defines the total size of the address space in bytes. For example, for a 32
+ * bit address space, this value should be `(1ull << 32)`.
+ */
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ull << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ull << 32)
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_SHIFT		6
+#define CACHE_WRITEBACK_GRANULE		(1 << CACHE_WRITEBACK_SHIFT)
+
+/* Platform default console definitions */
+#ifndef K3_USART_BASE
+#define K3_USART_BASE			(0x02800000 + 0x10000 * K3_USART)
+#endif
+
+/* USART has a default size for address space */
+#define K3_USART_SIZE 0x1000
+
+#ifndef K3_USART_CLK_SPEED
+#define K3_USART_CLK_SPEED 48000000
+#endif
+
+/* Crash console defaults */
+#define CRASH_CONSOLE_BASE K3_USART_BASE
+#define CRASH_CONSOLE_CLK K3_USART_CLK_SPEED
+#define CRASH_CONSOLE_BAUD_RATE K3_USART_BAUD
+
+/* Timer frequency */
+#ifndef SYS_COUNTER_FREQ_IN_TICKS
+#define SYS_COUNTER_FREQ_IN_TICKS 200000000
+#endif
+
+/* Interrupt numbers */
+#define ARM_IRQ_SEC_PHY_TIMER		29
+
+#define ARM_IRQ_SEC_SGI_0		8
+#define ARM_IRQ_SEC_SGI_1		9
+#define ARM_IRQ_SEC_SGI_2		10
+#define ARM_IRQ_SEC_SGI_3		11
+#define ARM_IRQ_SEC_SGI_4		12
+#define ARM_IRQ_SEC_SGI_5		13
+#define ARM_IRQ_SEC_SGI_6		14
+#define ARM_IRQ_SEC_SGI_7		15
+
+/*
+ * Define properties of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
+#define PLAT_ARM_G0_IRQ_PROPS(grp) \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE), \
+	INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \
+			GIC_INTR_CFG_EDGE)
+
+
+#define K3_GTC_BASE		0x00A90000
+/* We just need 20 byte offset, but simpler to just remap the 64K page in */
+#define K3_GTC_SIZE		0x10000
+#define K3_GTC_CNTCR_OFFSET	0x00
+#define K3_GTC_CNTCR_EN_MASK	0x01
+#define K3_GTC_CNTCR_HDBG_MASK	0x02
+#define K3_GTC_CNTFID0_OFFSET	0x20
+
+#define K3_GIC_BASE	0x01800000
+#define K3_GIC_SIZE	0x200000
+
+#if !K3_SEC_PROXY_LITE
+#define SEC_PROXY_DATA_BASE	0x32C00000
+#define SEC_PROXY_DATA_SIZE	0x80000
+#define SEC_PROXY_SCFG_BASE	0x32800000
+#define SEC_PROXY_SCFG_SIZE	0x80000
+#define SEC_PROXY_RT_BASE	0x32400000
+#define SEC_PROXY_RT_SIZE	0x80000
+#else
+#define SEC_PROXY_DATA_BASE	0x4D000000
+#define SEC_PROXY_DATA_SIZE	0x80000
+#define SEC_PROXY_SCFG_BASE	0x4A400000
+#define SEC_PROXY_SCFG_SIZE	0x80000
+#define SEC_PROXY_RT_BASE	0x4A600000
+#define SEC_PROXY_RT_SIZE	0x80000
+#endif /* K3_SEC_PROXY_LITE */
+
+#define SEC_PROXY_TIMEOUT_US		1000000
+#define SEC_PROXY_MAX_MESSAGE_SIZE	56
+
+#define TI_SCI_HOST_ID			10
+#define TI_SCI_MAX_MESSAGE_SIZE		52
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/ti/k3/platform.mk b/plat/ti/k3/platform.mk
new file mode 100644
index 0000000..bce9ef1
--- /dev/null
+++ b/plat/ti/k3/platform.mk
@@ -0,0 +1,25 @@
+#
+# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+PLAT_PATH	:=	plat/ti/k3
+TARGET_BOARD	?=	generic
+
+include ${PLAT_PATH}/common/plat_common.mk
+include ${PLAT_PATH}/board/${TARGET_BOARD}/board.mk
+
+BL32_BASE ?= 0x9e800000
+$(eval $(call add_define,BL32_BASE))
+
+PRELOADED_BL33_BASE ?= 0x80080000
+$(eval $(call add_define,PRELOADED_BL33_BASE))
+
+K3_HW_CONFIG_BASE ?= 0x82000000
+$(eval $(call add_define,K3_HW_CONFIG_BASE))
+
+PLAT_INCLUDES += -Iplat/ti/k3/board/${TARGET_BOARD}/include
+
+# modify BUILD_PLAT to point to board specific build directory
+BUILD_PLAT := $(abspath ${BUILD_BASE})/${PLAT}/${TARGET_BOARD}/${BUILD_TYPE}