Merging upstream version 6.7.12.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

42 files changed, 71 insertions, 85 deletions

diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb..90bd12feac 100644
--- a/arch/arm/boot/dts/amazon/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index efed325af8..d99bac0223 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5e..857cb26ed6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb..e6f3cf3c72 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@
 				interrupts = <40>;
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -594,7 +595,6 @@
 	i2c0: i2c-bus@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@
 	i2c1: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@
 	i2c2: i2c-bus@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@
 	i2c3: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@
 	i2c4: i2c-bus@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@
 	i2c5: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@
 	i2c6: i2c-bus@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@
 	i2c7: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@
 	i2c8: i2c-bus@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@
 	i2c9: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@
 	i2c10: i2c-bus@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@
 	i2c11: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@
 	i2c12: i2c-bus@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@
 	i2c13: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8..29f94696d8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@
 				reg = <0x1e780500 0x100>;
 				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -488,6 +489,7 @@
 				reg = <0x1e780600 0x100>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
@@ -902,7 +904,6 @@
 	i2c0: i2c-bus@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x80 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@
 	i2c1: i2c-bus@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x100 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@
 	i2c2: i2c-bus@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x180 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@
 	i2c3: i2c-bus@200 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x200 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@
 	i2c4: i2c-bus@280 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x280 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@
 	i2c5: i2c-bus@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x300 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@
 	i2c6: i2c-bus@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x380 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@
 	i2c7: i2c-bus@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x400 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@
 	i2c8: i2c-bus@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x480 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@
 	i2c9: i2c-bus@500 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x500 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@
 	i2c10: i2c-bus@580 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x580 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@
 	i2c11: i2c-bus@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x600 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@
 	i2c12: i2c-bus@680 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x680 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@
 	i2c13: i2c-bus@700 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x700 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@
 	i2c14: i2c-bus@780 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x780 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@
 	i2c15: i2c-bus@800 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 		reg = <0x800 0x80>;
 		compatible = "aspeed,ast2600-i2c-bus";
 		clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed825..07ca0d993c 100644
--- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a680619..75545b10ef 100644
--- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1f..6a4482c931 100644
--- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -352,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
index 4d70f6afd1..6d5e69035f 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts
@@ -60,6 +60,8 @@
 			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
 			 * each handling all IRQs.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 1 */
 			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
index 9ec0169bac..5f4c849915 100644
--- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts
@@ -89,6 +89,8 @@
 			 * The slots have Ethernet, Ethernet, NEC and MPCI.
 			 * The IDSELs are 11, 12, 13, 14.
 			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map =
 			/* IDSEL 11 - Ethernet A */
 			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e6..c841eb8e7f 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@
 			gpio2: gpio-expander@20 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;
 
@@ -79,6 +80,7 @@
 			gpio3: gpio-expander@21 {
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
+				interrupt-controller;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;
 
diff --git a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382..bc64348b82 100644
--- a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e..6e1f0f164c 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
 					     <3 IRQ_TYPE_LEVEL_HIGH>,
 					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
@@ -128,6 +129,7 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 			};
 
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4..ff0d684622 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273c..d38f1dd38a 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c..81c8a5fd92 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@
 			compatible = "st,stmpe811";
 			reg = <0x41>;
 			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4b..c32ea040fe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,17 +117,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
@@ -149,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6..cad112e054 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 
 		bridge@2,1 {
 			compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			ethernet@3,0 {
@@ -250,7 +248,6 @@
 
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 
 			/* Intel Corporation I210 Gigabit Network Connection */
 			switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71..c1ae7c47b4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@
 				reg = <0x74>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@
 
 		#address-cells = <3>;
 		#size-cells = <2>;
-		#interrupt-cells = <1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c..dcb4f6a32f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -619,7 +619,6 @@
 		blocks = <0x5>;
 		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2da..6cc4d6fd5f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -543,7 +543,6 @@
 		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
-		interrupt-controller;
 		id = <0>;
 		irq-trigger = <0x1>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1..42b2ba23ae 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d..c0c47adc58 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		#interrupt-cells = <2>;
 		interrupt-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e..85e278eb20 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe2..1b96565229 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
+		interrupt-controller;
 		reg = <0x25>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4e..a248b8a453 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -338,6 +338,7 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 		interrupt-parent = <&gpio3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 0bc2e66d15..f41cc4b4b5 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -1226,7 +1226,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index a976370264..fb6764b2dc 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -345,10 +345,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index ed75c01dbe..3d02f065f7 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c390669670..d1f4cbd099 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
index 4d666ad8b1..b17a9f9307 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts
@@ -432,6 +432,7 @@
 			interrupt-parent = <&irqc0>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			rtc {
 				compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
index fe14727eef..25956661a8 100644
--- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts
@@ -332,6 +332,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
index 545515b41e..ec01cc8595 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts
@@ -795,6 +795,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index ec0a20d513..fcc9a2313e 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -389,6 +389,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		watchdog {
 			compatible = "dlg,da9063-watchdog";
diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
index e793134f32..af16f25184 100644
--- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts
@@ -332,6 +332,7 @@
 		interrupt-parent = <&irqc>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
index 79b537b246..9358fc7d0e 100644
--- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts
@@ -735,6 +735,7 @@
 		interrupt-parent = <&irqc0>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
index 08df031bc2..73ec4d3541 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts
@@ -453,6 +453,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		rtc {
 			compatible = "dlg,da9063-rtc";
diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
index b7af1befa1..b825f2e25d 100644
--- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts
@@ -424,6 +424,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index abf3006f0a..f3291f3bbc 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -196,7 +196,6 @@
 	pwm4: pwm@10280000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280000 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -208,7 +207,6 @@
 	pwm5: pwm@10280010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280010 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -220,7 +218,6 @@
 	pwm6: pwm@10280020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280020 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -232,7 +229,6 @@
 	pwm7: pwm@10280030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x10280030 0x10>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -386,7 +382,6 @@
 	pwm0: pwm@20040000 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040000 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -398,7 +393,6 @@
 	pwm1: pwm@20040010 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040010 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -410,7 +404,6 @@
 	pwm2: pwm@20040020 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040020 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -422,7 +415,6 @@
 	pwm3: pwm@20040030 {
 		compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20040030 0x10>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c..afa417b34b 100644
--- a/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@
 		reg = <0x42>;
 		interrupts = <8 3>;
 		interrupt-parent = <&gpioi>;
-		interrupt-controller;
 		wakeup-source;
 
 		stmpegpio: stmpe_gpio {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb..7a701f7ef0 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@
 		reg = <0x38>;
 		interrupts = <2 2>;
 		interrupt-parent = <&gpiof>;
-		interrupt-controller;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
 		status = "okay";
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc143..5b240769d3 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -415,7 +415,6 @@
 		reg = <0x41>;
 		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
-		interrupt-controller;
 		id = <0>;
 		blocks = <0x5>;
 		irq-trigger = <0x1>;