diff options
Diffstat (limited to 'arch/arm/boot/dts')
42 files changed, 71 insertions, 85 deletions
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi index ff68dfb4e..90bd12fea 100644 --- a/arch/arm/boot/dts/amazon/alpine.dtsi +++ b/arch/arm/boot/dts/amazon/alpine.dtsi @@ -167,7 +167,6 @@ msix: msix@fbe00000 { compatible = "al,alpine-msix"; reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; msi-controller; al,msi-base-spi = <96>; al,msi-num-spis = <64>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts index efed325af..d99bac022 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts @@ -451,7 +451,7 @@ /* Direct-mapped development chip ROM */ pb1176_rom@10200000 { - compatible = "direct-mapped"; + compatible = "mtd-rom"; reg = <0x10200000 0x4000>; bank-width = <1>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 530491ae5..857cb26ed 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -466,7 +466,6 @@ i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -482,7 +481,6 @@ i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -498,7 +496,6 @@ i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -515,7 +512,6 @@ i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -532,7 +528,6 @@ i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -549,7 +544,6 @@ i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -566,7 +560,6 @@ i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -583,7 +576,6 @@ i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -600,7 +592,6 @@ i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -617,7 +608,6 @@ i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -634,7 +624,6 @@ i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -651,7 +640,6 @@ i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -668,7 +656,6 @@ i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2400-i2c-bus"; @@ -685,7 +672,6 @@ i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2400-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index 04f98d1db..e6f3cf3c7 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -363,6 +363,7 @@ interrupts = <40>; reg = <0x1e780200 0x0100>; clocks = <&syscon ASPEED_CLK_APB>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -594,7 +595,6 @@ i2c0: i2c-bus@40 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -610,7 +610,6 @@ i2c1: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -626,7 +625,6 @@ i2c2: i2c-bus@c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0xc0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -643,7 +641,6 @@ i2c3: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -660,7 +657,6 @@ i2c4: i2c-bus@140 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x140 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -677,7 +673,6 @@ i2c5: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -694,7 +689,6 @@ i2c6: i2c-bus@1c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x1c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -711,7 +705,6 @@ i2c7: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -728,7 +721,6 @@ i2c8: i2c-bus@340 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x340 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -745,7 +737,6 @@ i2c9: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -762,7 +753,6 @@ i2c10: i2c-bus@3c0 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x3c0 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -779,7 +769,6 @@ i2c11: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -796,7 +785,6 @@ i2c12: i2c-bus@440 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x440 0x40>; compatible = "aspeed,ast2500-i2c-bus"; @@ -813,7 +801,6 @@ i2c13: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x40>; compatible = "aspeed,ast2500-i2c-bus"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index c4d1faade..29f94696d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -474,6 +474,7 @@ reg = <0x1e780500 0x100>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -488,6 +489,7 @@ reg = <0x1e780600 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_APB2>; + #interrupt-cells = <2>; interrupt-controller; bus-frequency = <12000000>; pinctrl-names = "default"; @@ -902,7 +904,6 @@ i2c0: i2c-bus@80 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x80 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -917,7 +918,6 @@ i2c1: i2c-bus@100 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x100 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -932,7 +932,6 @@ i2c2: i2c-bus@180 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x180 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -947,7 +946,6 @@ i2c3: i2c-bus@200 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x200 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -962,7 +960,6 @@ i2c4: i2c-bus@280 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x280 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -977,7 +974,6 @@ i2c5: i2c-bus@300 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x300 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -992,7 +988,6 @@ i2c6: i2c-bus@380 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x380 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1007,7 +1002,6 @@ i2c7: i2c-bus@400 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x400 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1022,7 +1016,6 @@ i2c8: i2c-bus@480 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x480 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1037,7 +1030,6 @@ i2c9: i2c-bus@500 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x500 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1052,7 +1044,6 @@ i2c10: i2c-bus@580 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x580 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1067,7 +1058,6 @@ i2c11: i2c-bus@600 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x600 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1082,7 +1072,6 @@ i2c12: i2c-bus@680 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x680 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1097,7 +1086,6 @@ i2c13: i2c-bus@700 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x700 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1112,7 +1100,6 @@ i2c14: i2c-bus@780 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x780 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; @@ -1127,7 +1114,6 @@ i2c15: i2c-bus@800 { #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; reg = <0x800 0x80>; compatible = "aspeed,ast2600-i2c-bus"; clocks = <&syscon ASPEED_CLK_APB2>; diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi index f9f79ed82..07ca0d993 100644 --- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi @@ -167,6 +167,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupt-parent = <&mailbox>; interrupts = <0>; }; @@ -247,6 +248,7 @@ gpio-controller; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; + #interrupt-cells = <2>; }; i2c1: i2c@1800b000 { @@ -518,6 +520,7 @@ gpio-controller; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 42 1>, <&pinctrl 1 44 3>, diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi index 788a68061..75545b10e 100644 --- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi @@ -200,6 +200,7 @@ gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi index 9d20ba3b1..6a4482c93 100644 --- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi @@ -180,6 +180,7 @@ gpio-controller; ngpios = <32>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&pinctrl 0 0 32>; }; @@ -352,6 +353,7 @@ gpio-controller; ngpios = <4>; interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts index 4d70f6afd..6d5e69035 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts @@ -60,6 +60,8 @@ * We have slots (IDSEL) 1 and 2 with one assigned IRQ * each handling all IRQs. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 1 */ <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */ diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts index 9ec0169ba..5f4c84991 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts @@ -89,6 +89,8 @@ * The slots have Ethernet, Ethernet, NEC and MPCI. * The IDSELs are 11, 12, 13, 14. */ + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = /* IDSEL 11 - Ethernet A */ <0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */ diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index dffb9f84e..c841eb8e7 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -65,6 +65,7 @@ gpio2: gpio-expander@20 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x20>; @@ -79,6 +80,7 @@ gpio3: gpio-expander@21 { #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; compatible = "semtech,sx1505q"; reg = <0x21>; diff --git a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts index 04f1ae138..bc64348b8 100644 --- a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts @@ -28,7 +28,7 @@ &twsi1 { status = "okay"; pmic: max8925@3c { - compatible = "maxium,max8925"; + compatible = "maxim,max8925"; reg = <0x3c>; interrupts = <1>; interrupt-parent = <&intcmux4>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi index fd671c7a1..6e1f0f164 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi +++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi @@ -120,6 +120,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; }; @@ -128,6 +129,7 @@ gpio-controller; #gpio-cells = <2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; interrupt-controller; }; diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi index 1640763fd..ff0d68462 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi @@ -997,7 +997,6 @@ compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi index 3b6fad273..d38f1dd38 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi @@ -980,7 +980,6 @@ compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi index 4eb526fe9..81c8a5fd9 100644 --- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi @@ -861,7 +861,6 @@ compatible = "st,stmpe811"; reg = <0x41>; irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi index 3be38a3c4..c32ea040f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -117,17 +117,9 @@ #address-cells = <1>; #size-cells = <0>; - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - switch@10 { compatible = "qca,qca8334"; - reg = <10>; + reg = <0x10>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { @@ -149,15 +141,30 @@ eth2: port@2 { reg = <2>; label = "eth2"; + phy-mode = "internal"; phy-handle = <&phy_port2>; }; eth1: port@3 { reg = <3>; label = "eth1"; + phy-mode = "internal"; phy-handle = <&phy_port3>; }; }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port2: ethernet-phy@1 { + reg = <1>; + }; + + phy_port3: ethernet-phy@2 { + reg = <2>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts index db8c332df..cad112e05 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts @@ -227,7 +227,6 @@ #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; bridge@2,1 { compatible = "pci10b5,8605"; @@ -235,7 +234,6 @@ #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ ethernet@3,0 { @@ -250,7 +248,6 @@ #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; /* Intel Corporation I210 Gigabit Network Connection */ switch_nic: ethernet@4,0 { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index 99f4f6ac7..c1ae7c47b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -245,6 +245,7 @@ reg = <0x74>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio2>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; @@ -390,7 +391,6 @@ #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index 4cc965277..dcb4f6a32 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -619,7 +619,6 @@ blocks = <0x5>; id = <0>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; interrupt-parent = <&gpio4>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 11d9c7a2d..6cc4d6fd5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -543,7 +543,6 @@ blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; - interrupt-controller; id = <0>; irq-trigger = <0x1>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi index a63e73adc..42b2ba23a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi @@ -225,7 +225,6 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio2>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi index 113974520..c0c47adc5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi @@ -124,6 +124,7 @@ reg = <0x58>; interrupt-parent = <&gpio2>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */ + #interrupt-cells = <2>; interrupt-controller; regulators { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi index 86b4269e0..85e278eb2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi @@ -100,6 +100,7 @@ interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 12361fcbe..1b9656522 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -63,6 +63,7 @@ gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + interrupt-controller; reg = <0x25>; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index 16b4e06c4..a248b8a45 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -338,6 +338,7 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 0bc2e66d1..f41cc4b4b 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -1226,7 +1226,7 @@ qfprom: qfprom@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; + reg = <0xfc4bc000 0x2100>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index a97637026..fb6764b2d 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -345,10 +345,10 @@ "msi8"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ clocks = <&gcc GCC_PCIE_PIPE_CLK>, <&gcc GCC_PCIE_AUX_CLK>, diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts index ed75c01db..3d02f065f 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts @@ -209,6 +209,18 @@ status = "okay"; }; +&extal1_clk { + clock-frequency = <26000000>; +}; + +&extal2_clk { + clock-frequency = <48000000>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + &pfc { scifa0_pins: scifa0 { groups = "scifa0_data"; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index c39066967..d1f4cbd09 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -450,17 +450,20 @@ extalr_clk: extalr { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <32768>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; extal1_clk: extal1 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <25000000>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; extal2_clk: extal2 { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <48000000>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; }; fsiack_clk: fsiack { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 4d666ad8b..b17a9f930 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -432,6 +432,7 @@ interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index fe14727ee..25956661a 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -332,6 +332,7 @@ interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 545515b41..ec01cc859 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -795,6 +795,7 @@ interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index ec0a20d51..fcc9a2313 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -389,6 +389,7 @@ interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; watchdog { compatible = "dlg,da9063-watchdog"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index e793134f3..af16f2518 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -332,6 +332,7 @@ interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 79b537b24..9358fc7d0 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -735,6 +735,7 @@ interrupt-parent = <&irqc0>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index 08df031bc..73ec4d354 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -453,6 +453,7 @@ interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index b7af1befa..b825f2e25 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -424,6 +424,7 @@ interrupt-parent = <&gpio3>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; onkey { compatible = "dlg,da9063-onkey"; diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi index abf3006f0..f3291f3bb 100644 --- a/arch/arm/boot/dts/rockchip/rv1108.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi @@ -196,7 +196,6 @@ pwm4: pwm@10280000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280000 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -208,7 +207,6 @@ pwm5: pwm@10280010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280010 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -220,7 +218,6 @@ pwm6: pwm@10280020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280020 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -232,7 +229,6 @@ pwm7: pwm@10280030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x10280030 0x10>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -386,7 +382,6 @@ pwm0: pwm@20040000 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040000 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -398,7 +393,6 @@ pwm1: pwm@20040010 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040010 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -410,7 +404,6 @@ pwm2: pwm@20040020 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040020 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; @@ -422,7 +415,6 @@ pwm3: pwm@20040030 { compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm"; reg = <0x20040030 0x10>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>; clock-names = "pwm", "pclk"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts index 576235ec3..afa417b34 100644 --- a/arch/arm/boot/dts/st/stm32429i-eval.dts +++ b/arch/arm/boot/dts/st/stm32429i-eval.dts @@ -222,7 +222,6 @@ reg = <0x42>; interrupts = <8 3>; interrupt-parent = <&gpioi>; - interrupt-controller; wakeup-source; stmpegpio: stmpe_gpio { diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts index 510cca5ac..7a701f7ef 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts @@ -64,7 +64,6 @@ reg = <0x38>; interrupts = <2 2>; interrupt-parent = <&gpiof>; - interrupt-controller; touchscreen-size-x = <480>; touchscreen-size-y = <800>; status = "okay"; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index 9a234dc14..5b240769d 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -415,7 +415,6 @@ reg = <0x41>; interrupts = <30 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio2>; - interrupt-controller; id = <0>; blocks = <0x5>; irq-trigger = <0x1>; |