Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 679 insertions, 0 deletions

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
new file mode 100644
index 000000000..97ea76d44
--- /dev/null
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom GENET MDIO routines
+ *
+ * Copyright (c) 2014-2017 Broadcom
+ */
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/brcmphy.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/platform_data/bcmgenet.h>
+#include <linux/platform_data/mdio-bcm-unimac.h>
+
+#include "bcmgenet.h"
+
+static void bcmgenet_mac_config(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = dev->phydev;
+	u32 reg, cmd_bits = 0;
+
+	/* speed */
+	if (phydev->speed == SPEED_1000)
+		cmd_bits = CMD_SPEED_1000;
+	else if (phydev->speed == SPEED_100)
+		cmd_bits = CMD_SPEED_100;
+	else
+		cmd_bits = CMD_SPEED_10;
+	cmd_bits <<= CMD_SPEED_SHIFT;
+
+	/* duplex */
+	if (phydev->duplex != DUPLEX_FULL) {
+		cmd_bits |= CMD_HD_EN |
+			CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE;
+	} else {
+		/* pause capability defaults to Symmetric */
+		if (priv->autoneg_pause) {
+			bool tx_pause = 0, rx_pause = 0;
+
+			if (phydev->autoneg)
+				phy_get_pause(phydev, &tx_pause, &rx_pause);
+
+			if (!tx_pause)
+				cmd_bits |= CMD_TX_PAUSE_IGNORE;
+			if (!rx_pause)
+				cmd_bits |= CMD_RX_PAUSE_IGNORE;
+		}
+
+		/* Manual override */
+		if (!priv->rx_pause)
+			cmd_bits |= CMD_RX_PAUSE_IGNORE;
+		if (!priv->tx_pause)
+			cmd_bits |= CMD_TX_PAUSE_IGNORE;
+	}
+
+	/* Program UMAC and RGMII block based on established
+	 * link speed, duplex, and pause. The speed set in
+	 * umac->cmd tell RGMII block which clock to use for
+	 * transmit -- 25MHz(100Mbps) or 125MHz(1Gbps).
+	 * Receive clock is provided by the PHY.
+	 */
+	reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+	reg |= RGMII_LINK;
+	bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+
+	reg = bcmgenet_umac_readl(priv, UMAC_CMD);
+	reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) |
+		       CMD_HD_EN |
+		       CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE);
+	reg |= cmd_bits;
+	if (reg & CMD_SW_RESET) {
+		reg &= ~CMD_SW_RESET;
+		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+		udelay(2);
+		reg |= CMD_TX_EN | CMD_RX_EN;
+	}
+	bcmgenet_umac_writel(priv, reg, UMAC_CMD);
+
+	priv->eee.eee_active = phy_init_eee(phydev, 0) >= 0;
+	bcmgenet_eee_enable_set(dev,
+				priv->eee.eee_enabled && priv->eee.eee_active,
+				priv->eee.tx_lpi_enabled);
+}
+
+/* setup netdev link state when PHY link status change and
+ * update UMAC and RGMII block when link up
+ */
+void bcmgenet_mii_setup(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = dev->phydev;
+	u32 reg;
+
+	if (phydev->link) {
+		bcmgenet_mac_config(dev);
+	} else {
+		reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+		reg &= ~RGMII_LINK;
+		bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+	}
+
+	phy_print_status(phydev);
+}
+
+
+static int bcmgenet_fixed_phy_link_update(struct net_device *dev,
+					  struct fixed_phy_status *status)
+{
+	struct bcmgenet_priv *priv;
+	u32 reg;
+
+	if (dev && dev->phydev && status) {
+		priv = netdev_priv(dev);
+		reg = bcmgenet_umac_readl(priv, UMAC_MODE);
+		status->link = !!(reg & MODE_LINK_STATUS);
+	}
+
+	return 0;
+}
+
+void bcmgenet_phy_pause_set(struct net_device *dev, bool rx, bool tx)
+{
+	struct phy_device *phydev = dev->phydev;
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising, rx);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising,
+			 rx | tx);
+	phy_start_aneg(phydev);
+
+	mutex_lock(&phydev->lock);
+	if (phydev->link)
+		bcmgenet_mac_config(dev);
+	mutex_unlock(&phydev->lock);
+}
+
+void bcmgenet_phy_power_set(struct net_device *dev, bool enable)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	u32 reg = 0;
+
+	/* EXT_GPHY_CTRL is only valid for GENETv4 and onward */
+	if (GENET_IS_V4(priv) || priv->ephy_16nm) {
+		reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
+		if (enable) {
+			reg &= ~EXT_CK25_DIS;
+			bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+			mdelay(1);
+
+			reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN |
+				 EXT_CFG_IDDQ_GLOBAL_PWR);
+			reg |= EXT_GPHY_RESET;
+			bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+			mdelay(1);
+
+			reg &= ~EXT_GPHY_RESET;
+		} else {
+			reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN |
+			       EXT_GPHY_RESET | EXT_CFG_IDDQ_GLOBAL_PWR;
+			bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+			mdelay(1);
+			reg |= EXT_CK25_DIS;
+		}
+		bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
+		udelay(60);
+	} else {
+		mdelay(1);
+	}
+}
+
+static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv)
+{
+	if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET)
+		fixed_phy_set_link_update(priv->dev->phydev,
+					  bcmgenet_fixed_phy_link_update);
+}
+
+int bcmgenet_mii_config(struct net_device *dev, bool init)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = dev->phydev;
+	struct device *kdev = &priv->pdev->dev;
+	const char *phy_name = NULL;
+	u32 id_mode_dis = 0;
+	u32 port_ctrl;
+	u32 reg;
+
+	switch (priv->phy_interface) {
+	case PHY_INTERFACE_MODE_INTERNAL:
+		phy_name = "internal PHY";
+		fallthrough;
+	case PHY_INTERFACE_MODE_MOCA:
+		/* Irrespective of the actually configured PHY speed (100 or
+		 * 1000) GENETv4 only has an internal GPHY so we will just end
+		 * up masking the Gigabit features from what we support, not
+		 * switching to the EPHY
+		 */
+		if (GENET_IS_V4(priv))
+			port_ctrl = PORT_MODE_INT_GPHY;
+		else
+			port_ctrl = PORT_MODE_INT_EPHY;
+
+		if (!phy_name) {
+			phy_name = "MoCA";
+			if (!GENET_IS_V5(priv))
+				port_ctrl |= LED_ACT_SOURCE_MAC;
+			bcmgenet_moca_phy_setup(priv);
+		}
+		break;
+
+	case PHY_INTERFACE_MODE_MII:
+		phy_name = "external MII";
+		phy_set_max_speed(phydev, SPEED_100);
+		port_ctrl = PORT_MODE_EXT_EPHY;
+		break;
+
+	case PHY_INTERFACE_MODE_REVMII:
+		phy_name = "external RvMII";
+		/* of_mdiobus_register took care of reading the 'max-speed'
+		 * PHY property for us, effectively limiting the PHY supported
+		 * capabilities, use that knowledge to also configure the
+		 * Reverse MII interface correctly.
+		 */
+		if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				      dev->phydev->supported))
+			port_ctrl = PORT_MODE_EXT_RVMII_50;
+		else
+			port_ctrl = PORT_MODE_EXT_RVMII_25;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+		/* RGMII_NO_ID: TXC transitions at the same time as TXD
+		 *		(requires PCB or receiver-side delay)
+		 *
+		 * ID is implicitly disabled for 100Mbps (RG)MII operation.
+		 */
+		phy_name = "external RGMII (no delay)";
+		id_mode_dis = BIT(16);
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* RGMII_TXID:	Add 2ns delay on TXC (90 degree shift) */
+		phy_name = "external RGMII (TX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phy_name = "external RGMII (RX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
+	default:
+		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
+		return -EINVAL;
+	}
+
+	bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
+
+	priv->ext_phy = !priv->internal_phy &&
+			(priv->phy_interface != PHY_INTERFACE_MODE_MOCA);
+
+	/* This is an external PHY (xMII), so we need to enable the RGMII
+	 * block for the interface to work, unconditionally clear the
+	 * Out-of-band disable since we do not need it.
+	 */
+	reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL);
+	reg &= ~OOB_DISABLE;
+	if (priv->ext_phy) {
+		reg &= ~ID_MODE_DIS;
+		reg |= id_mode_dis;
+		if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv))
+			reg |= RGMII_MODE_EN_V123;
+		else
+			reg |= RGMII_MODE_EN;
+	}
+	bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL);
+
+	if (init)
+		dev_info(kdev, "configuring instance for %s\n", phy_name);
+
+	return 0;
+}
+
+int bcmgenet_mii_probe(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device *kdev = &priv->pdev->dev;
+	struct device_node *dn = kdev->of_node;
+	phy_interface_t phy_iface = priv->phy_interface;
+	struct phy_device *phydev;
+	u32 phy_flags = PHY_BRCM_AUTO_PWRDWN_ENABLE |
+			PHY_BRCM_DIS_TXCRXC_NOENRGY |
+			PHY_BRCM_IDDQ_SUSPEND;
+	int ret;
+
+	/* Communicate the integrated PHY revision */
+	if (priv->internal_phy)
+		phy_flags = priv->gphy_rev;
+
+	/* This is an ugly quirk but we have not been correctly interpreting
+	 * the phy_interface values and we have done that across different
+	 * drivers, so at least we are consistent in our mistakes.
+	 *
+	 * When the Generic PHY driver is in use either the PHY has been
+	 * strapped or programmed correctly by the boot loader so we should
+	 * stick to our incorrect interpretation since we have validated it.
+	 *
+	 * Now when a dedicated PHY driver is in use, we need to reverse the
+	 * meaning of the phy_interface_mode values to something that the PHY
+	 * driver will interpret and act on such that we have two mistakes
+	 * canceling themselves so to speak. We only do this for the two
+	 * modes that GENET driver officially supports on Broadcom STB chips:
+	 * PHY_INTERFACE_MODE_RGMII and PHY_INTERFACE_MODE_RGMII_TXID. Other
+	 * modes are not *officially* supported with the boot loader and the
+	 * scripted environment generating Device Tree blobs for those
+	 * platforms.
+	 *
+	 * Note that internal PHY, MoCA and fixed-link configurations are not
+	 * affected because they use different phy_interface_t values or the
+	 * Generic PHY driver.
+	 */
+	switch (priv->phy_interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		phy_iface = PHY_INTERFACE_MODE_RGMII_ID;
+		break;
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		phy_iface = PHY_INTERFACE_MODE_RGMII_RXID;
+		break;
+	default:
+		break;
+	}
+
+	if (dn) {
+		phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup,
+					phy_flags, phy_iface);
+		if (!phydev) {
+			pr_err("could not attach to PHY\n");
+			return -ENODEV;
+		}
+	} else {
+		if (has_acpi_companion(kdev)) {
+			char mdio_bus_id[MII_BUS_ID_SIZE];
+			struct mii_bus *unimacbus;
+
+			snprintf(mdio_bus_id, MII_BUS_ID_SIZE, "%s-%d",
+				 UNIMAC_MDIO_DRV_NAME, priv->pdev->id);
+
+			unimacbus = mdio_find_bus(mdio_bus_id);
+			if (!unimacbus) {
+				pr_err("Unable to find mii\n");
+				return -ENODEV;
+			}
+			phydev = phy_find_first(unimacbus);
+			put_device(&unimacbus->dev);
+			if (!phydev) {
+				pr_err("Unable to find PHY\n");
+				return -ENODEV;
+			}
+		} else {
+			phydev = dev->phydev;
+		}
+		phydev->dev_flags = phy_flags;
+
+		ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup,
+					 phy_iface);
+		if (ret) {
+			pr_err("could not attach to PHY\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Configure port multiplexer based on what the probed PHY device since
+	 * reading the 'max-speed' property determines the maximum supported
+	 * PHY speed which is needed for bcmgenet_mii_config() to configure
+	 * things appropriately.
+	 */
+	ret = bcmgenet_mii_config(dev, true);
+	if (ret) {
+		phy_disconnect(dev->phydev);
+		return ret;
+	}
+
+	/* The internal PHY has its link interrupts routed to the
+	 * Ethernet MAC ISRs. On GENETv5 there is a hardware issue
+	 * that prevents the signaling of link UP interrupts when
+	 * the link operates at 10Mbps, so fallback to polling for
+	 * those versions of GENET.
+	 */
+	if (priv->internal_phy && !GENET_IS_V5(priv))
+		dev->phydev->irq = PHY_MAC_INTERRUPT;
+
+	/* Indicate that the MAC is responsible for PHY PM */
+	dev->phydev->mac_managed_pm = true;
+
+	return 0;
+}
+
+static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv)
+{
+	struct device_node *dn = priv->pdev->dev.of_node;
+	struct device *kdev = &priv->pdev->dev;
+	char *compat;
+
+	compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version);
+	if (!compat)
+		return NULL;
+
+	priv->mdio_dn = of_get_compatible_child(dn, compat);
+	kfree(compat);
+	if (!priv->mdio_dn) {
+		dev_err(kdev, "unable to find MDIO bus node\n");
+		return NULL;
+	}
+
+	return priv->mdio_dn;
+}
+
+static void bcmgenet_mii_pdata_init(struct bcmgenet_priv *priv,
+				    struct unimac_mdio_pdata *ppd)
+{
+	struct device *kdev = &priv->pdev->dev;
+	struct bcmgenet_platform_data *pd = kdev->platform_data;
+
+	if (pd->phy_interface != PHY_INTERFACE_MODE_MOCA && pd->mdio_enabled) {
+		/*
+		 * Internal or external PHY with MDIO access
+		 */
+		if (pd->phy_address >= 0 && pd->phy_address < PHY_MAX_ADDR)
+			ppd->phy_mask = 1 << pd->phy_address;
+		else
+			ppd->phy_mask = 0;
+	}
+}
+
+static int bcmgenet_mii_wait(void *wait_func_data)
+{
+	struct bcmgenet_priv *priv = wait_func_data;
+
+	wait_event_timeout(priv->wq,
+			   !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD)
+			   & MDIO_START_BUSY),
+			   HZ / 100);
+	return 0;
+}
+
+static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
+{
+	struct platform_device *pdev = priv->pdev;
+	struct bcmgenet_platform_data *pdata = pdev->dev.platform_data;
+	struct device_node *dn = pdev->dev.of_node;
+	struct unimac_mdio_pdata ppd;
+	struct platform_device *ppdev;
+	struct resource *pres, res;
+	int id, ret;
+
+	pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pres) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
+	memset(&res, 0, sizeof(res));
+	memset(&ppd, 0, sizeof(ppd));
+
+	ppd.wait_func = bcmgenet_mii_wait;
+	ppd.wait_func_data = priv;
+	ppd.bus_name = "bcmgenet MII bus";
+
+	/* Unimac MDIO bus controller starts at UniMAC offset + MDIO_CMD
+	 * and is 2 * 32-bits word long, 8 bytes total.
+	 */
+	res.start = pres->start + GENET_UMAC_OFF + UMAC_MDIO_CMD;
+	res.end = res.start + 8;
+	res.flags = IORESOURCE_MEM;
+
+	if (dn)
+		id = of_alias_get_id(dn, "eth");
+	else
+		id = pdev->id;
+
+	ppdev = platform_device_alloc(UNIMAC_MDIO_DRV_NAME, id);
+	if (!ppdev)
+		return -ENOMEM;
+
+	/* Retain this platform_device pointer for later cleanup */
+	priv->mii_pdev = ppdev;
+	ppdev->dev.parent = &pdev->dev;
+	if (dn)
+		ppdev->dev.of_node = bcmgenet_mii_of_find_mdio(priv);
+	else if (pdata)
+		bcmgenet_mii_pdata_init(priv, &ppd);
+	else
+		ppd.phy_mask = ~0;
+
+	ret = platform_device_add_resources(ppdev, &res, 1);
+	if (ret)
+		goto out;
+
+	ret = platform_device_add_data(ppdev, &ppd, sizeof(ppd));
+	if (ret)
+		goto out;
+
+	ret = platform_device_add(ppdev);
+	if (ret)
+		goto out;
+
+	return 0;
+out:
+	platform_device_put(ppdev);
+	return ret;
+}
+
+static int bcmgenet_phy_interface_init(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	int phy_mode = device_get_phy_mode(kdev);
+
+	if (phy_mode < 0) {
+		dev_err(kdev, "invalid PHY mode property\n");
+		return phy_mode;
+	}
+
+	priv->phy_interface = phy_mode;
+
+	/* We need to specifically look up whether this PHY interface is
+	 * internal or not *before* we even try to probe the PHY driver
+	 * over MDIO as we may have shut down the internal PHY for power
+	 * saving purposes.
+	 */
+	if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
+		priv->internal_phy = true;
+
+	return 0;
+}
+
+static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
+{
+	struct device_node *dn = priv->pdev->dev.of_node;
+	struct phy_device *phydev;
+	int ret;
+
+	/* Fetch the PHY phandle */
+	priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0);
+
+	/* In the case of a fixed PHY, the DT node associated
+	 * to the PHY is the Ethernet MAC DT node.
+	 */
+	if (!priv->phy_dn && of_phy_is_fixed_link(dn)) {
+		ret = of_phy_register_fixed_link(dn);
+		if (ret)
+			return ret;
+
+		priv->phy_dn = of_node_get(dn);
+	}
+
+	/* Get the link mode */
+	ret = bcmgenet_phy_interface_init(priv);
+	if (ret)
+		return ret;
+
+	/* Make sure we initialize MoCA PHYs with a link down */
+	if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
+		phydev = of_phy_find_device(dn);
+		if (phydev) {
+			phydev->link = 0;
+			put_device(&phydev->mdio.dev);
+		}
+	}
+
+	return 0;
+}
+
+static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	struct bcmgenet_platform_data *pd = kdev->platform_data;
+	char phy_name[MII_BUS_ID_SIZE + 3];
+	char mdio_bus_id[MII_BUS_ID_SIZE];
+	struct phy_device *phydev;
+
+	snprintf(mdio_bus_id, MII_BUS_ID_SIZE, "%s-%d",
+		 UNIMAC_MDIO_DRV_NAME, priv->pdev->id);
+
+	if (pd->phy_interface != PHY_INTERFACE_MODE_MOCA && pd->mdio_enabled) {
+		snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT,
+			 mdio_bus_id, pd->phy_address);
+
+		/*
+		 * Internal or external PHY with MDIO access
+		 */
+		phydev = phy_attach(priv->dev, phy_name, pd->phy_interface);
+		if (IS_ERR(phydev)) {
+			dev_err(kdev, "failed to register PHY device\n");
+			return PTR_ERR(phydev);
+		}
+	} else {
+		/*
+		 * MoCA port or no MDIO access.
+		 * Use fixed PHY to represent the link layer.
+		 */
+		struct fixed_phy_status fphy_status = {
+			.link = 1,
+			.speed = pd->phy_speed,
+			.duplex = pd->phy_duplex,
+			.pause = 0,
+			.asym_pause = 0,
+		};
+
+		phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
+		if (IS_ERR(phydev)) {
+			dev_err(kdev, "failed to register fixed PHY device\n");
+			return PTR_ERR(phydev);
+		}
+
+		/* Make sure we initialize MoCA PHYs with a link down */
+		phydev->link = 0;
+
+	}
+
+	priv->phy_interface = pd->phy_interface;
+
+	return 0;
+}
+
+static int bcmgenet_mii_bus_init(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	struct device_node *dn = kdev->of_node;
+
+	if (dn)
+		return bcmgenet_mii_of_init(priv);
+	else if (has_acpi_companion(kdev))
+		return bcmgenet_phy_interface_init(priv);
+	else
+		return bcmgenet_mii_pd_init(priv);
+}
+
+int bcmgenet_mii_init(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	int ret;
+
+	ret = bcmgenet_mii_register(priv);
+	if (ret)
+		return ret;
+
+	ret = bcmgenet_mii_bus_init(priv);
+	if (ret)
+		goto out;
+
+	return 0;
+
+out:
+	bcmgenet_mii_exit(dev);
+	return ret;
+}
+
+void bcmgenet_mii_exit(struct net_device *dev)
+{
+	struct bcmgenet_priv *priv = netdev_priv(dev);
+	struct device_node *dn = priv->pdev->dev.of_node;
+
+	if (of_phy_is_fixed_link(dn))
+		of_phy_deregister_fixed_link(dn);
+	of_node_put(priv->phy_dn);
+	clk_prepare_enable(priv->clk);
+	platform_device_unregister(priv->mii_pdev);
+	clk_disable_unprepare(priv->clk);
+}