diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/genet/bcmmii.c')
-rw-r--r-- | drivers/net/ethernet/broadcom/genet/bcmmii.c | 679 |
1 files changed, 679 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c new file mode 100644 index 0000000000..97ea76d443 --- /dev/null +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -0,0 +1,679 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Broadcom GENET MDIO routines + * + * Copyright (c) 2014-2017 Broadcom + */ + +#include <linux/acpi.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/bitops.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/brcmphy.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/platform_data/bcmgenet.h> +#include <linux/platform_data/mdio-bcm-unimac.h> + +#include "bcmgenet.h" + +static void bcmgenet_mac_config(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = dev->phydev; + u32 reg, cmd_bits = 0; + + /* speed */ + if (phydev->speed == SPEED_1000) + cmd_bits = CMD_SPEED_1000; + else if (phydev->speed == SPEED_100) + cmd_bits = CMD_SPEED_100; + else + cmd_bits = CMD_SPEED_10; + cmd_bits <<= CMD_SPEED_SHIFT; + + /* duplex */ + if (phydev->duplex != DUPLEX_FULL) { + cmd_bits |= CMD_HD_EN | + CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE; + } else { + /* pause capability defaults to Symmetric */ + if (priv->autoneg_pause) { + bool tx_pause = 0, rx_pause = 0; + + if (phydev->autoneg) + phy_get_pause(phydev, &tx_pause, &rx_pause); + + if (!tx_pause) + cmd_bits |= CMD_TX_PAUSE_IGNORE; + if (!rx_pause) + cmd_bits |= CMD_RX_PAUSE_IGNORE; + } + + /* Manual override */ + if (!priv->rx_pause) + cmd_bits |= CMD_RX_PAUSE_IGNORE; + if (!priv->tx_pause) + cmd_bits |= CMD_TX_PAUSE_IGNORE; + } + + /* Program UMAC and RGMII block based on established + * link speed, duplex, and pause. The speed set in + * umac->cmd tell RGMII block which clock to use for + * transmit -- 25MHz(100Mbps) or 125MHz(1Gbps). + * Receive clock is provided by the PHY. + */ + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg |= RGMII_LINK; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + + reg = bcmgenet_umac_readl(priv, UMAC_CMD); + reg &= ~((CMD_SPEED_MASK << CMD_SPEED_SHIFT) | + CMD_HD_EN | + CMD_RX_PAUSE_IGNORE | CMD_TX_PAUSE_IGNORE); + reg |= cmd_bits; + if (reg & CMD_SW_RESET) { + reg &= ~CMD_SW_RESET; + bcmgenet_umac_writel(priv, reg, UMAC_CMD); + udelay(2); + reg |= CMD_TX_EN | CMD_RX_EN; + } + bcmgenet_umac_writel(priv, reg, UMAC_CMD); + + priv->eee.eee_active = phy_init_eee(phydev, 0) >= 0; + bcmgenet_eee_enable_set(dev, + priv->eee.eee_enabled && priv->eee.eee_active, + priv->eee.tx_lpi_enabled); +} + +/* setup netdev link state when PHY link status change and + * update UMAC and RGMII block when link up + */ +void bcmgenet_mii_setup(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = dev->phydev; + u32 reg; + + if (phydev->link) { + bcmgenet_mac_config(dev); + } else { + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg &= ~RGMII_LINK; + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + } + + phy_print_status(phydev); +} + + +static int bcmgenet_fixed_phy_link_update(struct net_device *dev, + struct fixed_phy_status *status) +{ + struct bcmgenet_priv *priv; + u32 reg; + + if (dev && dev->phydev && status) { + priv = netdev_priv(dev); + reg = bcmgenet_umac_readl(priv, UMAC_MODE); + status->link = !!(reg & MODE_LINK_STATUS); + } + + return 0; +} + +void bcmgenet_phy_pause_set(struct net_device *dev, bool rx, bool tx) +{ + struct phy_device *phydev = dev->phydev; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising, rx); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising, + rx | tx); + phy_start_aneg(phydev); + + mutex_lock(&phydev->lock); + if (phydev->link) + bcmgenet_mac_config(dev); + mutex_unlock(&phydev->lock); +} + +void bcmgenet_phy_power_set(struct net_device *dev, bool enable) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + u32 reg = 0; + + /* EXT_GPHY_CTRL is only valid for GENETv4 and onward */ + if (GENET_IS_V4(priv) || priv->ephy_16nm) { + reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL); + if (enable) { + reg &= ~EXT_CK25_DIS; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + + reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | + EXT_CFG_IDDQ_GLOBAL_PWR); + reg |= EXT_GPHY_RESET; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + + reg &= ~EXT_GPHY_RESET; + } else { + reg |= EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | + EXT_GPHY_RESET | EXT_CFG_IDDQ_GLOBAL_PWR; + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + mdelay(1); + reg |= EXT_CK25_DIS; + } + bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL); + udelay(60); + } else { + mdelay(1); + } +} + +static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) +{ + if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET) + fixed_phy_set_link_update(priv->dev->phydev, + bcmgenet_fixed_phy_link_update); +} + +int bcmgenet_mii_config(struct net_device *dev, bool init) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct phy_device *phydev = dev->phydev; + struct device *kdev = &priv->pdev->dev; + const char *phy_name = NULL; + u32 id_mode_dis = 0; + u32 port_ctrl; + u32 reg; + + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_INTERNAL: + phy_name = "internal PHY"; + fallthrough; + case PHY_INTERFACE_MODE_MOCA: + /* Irrespective of the actually configured PHY speed (100 or + * 1000) GENETv4 only has an internal GPHY so we will just end + * up masking the Gigabit features from what we support, not + * switching to the EPHY + */ + if (GENET_IS_V4(priv)) + port_ctrl = PORT_MODE_INT_GPHY; + else + port_ctrl = PORT_MODE_INT_EPHY; + + if (!phy_name) { + phy_name = "MoCA"; + if (!GENET_IS_V5(priv)) + port_ctrl |= LED_ACT_SOURCE_MAC; + bcmgenet_moca_phy_setup(priv); + } + break; + + case PHY_INTERFACE_MODE_MII: + phy_name = "external MII"; + phy_set_max_speed(phydev, SPEED_100); + port_ctrl = PORT_MODE_EXT_EPHY; + break; + + case PHY_INTERFACE_MODE_REVMII: + phy_name = "external RvMII"; + /* of_mdiobus_register took care of reading the 'max-speed' + * PHY property for us, effectively limiting the PHY supported + * capabilities, use that knowledge to also configure the + * Reverse MII interface correctly. + */ + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + dev->phydev->supported)) + port_ctrl = PORT_MODE_EXT_RVMII_50; + else + port_ctrl = PORT_MODE_EXT_RVMII_25; + break; + + case PHY_INTERFACE_MODE_RGMII: + /* RGMII_NO_ID: TXC transitions at the same time as TXD + * (requires PCB or receiver-side delay) + * + * ID is implicitly disabled for 100Mbps (RG)MII operation. + */ + phy_name = "external RGMII (no delay)"; + id_mode_dis = BIT(16); + port_ctrl = PORT_MODE_EXT_GPHY; + break; + + case PHY_INTERFACE_MODE_RGMII_TXID: + /* RGMII_TXID: Add 2ns delay on TXC (90 degree shift) */ + phy_name = "external RGMII (TX delay)"; + port_ctrl = PORT_MODE_EXT_GPHY; + break; + + case PHY_INTERFACE_MODE_RGMII_RXID: + phy_name = "external RGMII (RX delay)"; + port_ctrl = PORT_MODE_EXT_GPHY; + break; + default: + dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface); + return -EINVAL; + } + + bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL); + + priv->ext_phy = !priv->internal_phy && + (priv->phy_interface != PHY_INTERFACE_MODE_MOCA); + + /* This is an external PHY (xMII), so we need to enable the RGMII + * block for the interface to work, unconditionally clear the + * Out-of-band disable since we do not need it. + */ + reg = bcmgenet_ext_readl(priv, EXT_RGMII_OOB_CTRL); + reg &= ~OOB_DISABLE; + if (priv->ext_phy) { + reg &= ~ID_MODE_DIS; + reg |= id_mode_dis; + if (GENET_IS_V1(priv) || GENET_IS_V2(priv) || GENET_IS_V3(priv)) + reg |= RGMII_MODE_EN_V123; + else + reg |= RGMII_MODE_EN; + } + bcmgenet_ext_writel(priv, reg, EXT_RGMII_OOB_CTRL); + + if (init) + dev_info(kdev, "configuring instance for %s\n", phy_name); + + return 0; +} + +int bcmgenet_mii_probe(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct device *kdev = &priv->pdev->dev; + struct device_node *dn = kdev->of_node; + phy_interface_t phy_iface = priv->phy_interface; + struct phy_device *phydev; + u32 phy_flags = PHY_BRCM_AUTO_PWRDWN_ENABLE | + PHY_BRCM_DIS_TXCRXC_NOENRGY | + PHY_BRCM_IDDQ_SUSPEND; + int ret; + + /* Communicate the integrated PHY revision */ + if (priv->internal_phy) + phy_flags = priv->gphy_rev; + + /* This is an ugly quirk but we have not been correctly interpreting + * the phy_interface values and we have done that across different + * drivers, so at least we are consistent in our mistakes. + * + * When the Generic PHY driver is in use either the PHY has been + * strapped or programmed correctly by the boot loader so we should + * stick to our incorrect interpretation since we have validated it. + * + * Now when a dedicated PHY driver is in use, we need to reverse the + * meaning of the phy_interface_mode values to something that the PHY + * driver will interpret and act on such that we have two mistakes + * canceling themselves so to speak. We only do this for the two + * modes that GENET driver officially supports on Broadcom STB chips: + * PHY_INTERFACE_MODE_RGMII and PHY_INTERFACE_MODE_RGMII_TXID. Other + * modes are not *officially* supported with the boot loader and the + * scripted environment generating Device Tree blobs for those + * platforms. + * + * Note that internal PHY, MoCA and fixed-link configurations are not + * affected because they use different phy_interface_t values or the + * Generic PHY driver. + */ + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_RGMII: + phy_iface = PHY_INTERFACE_MODE_RGMII_ID; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + phy_iface = PHY_INTERFACE_MODE_RGMII_RXID; + break; + default: + break; + } + + if (dn) { + phydev = of_phy_connect(dev, priv->phy_dn, bcmgenet_mii_setup, + phy_flags, phy_iface); + if (!phydev) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } else { + if (has_acpi_companion(kdev)) { + char mdio_bus_id[MII_BUS_ID_SIZE]; + struct mii_bus *unimacbus; + + snprintf(mdio_bus_id, MII_BUS_ID_SIZE, "%s-%d", + UNIMAC_MDIO_DRV_NAME, priv->pdev->id); + + unimacbus = mdio_find_bus(mdio_bus_id); + if (!unimacbus) { + pr_err("Unable to find mii\n"); + return -ENODEV; + } + phydev = phy_find_first(unimacbus); + put_device(&unimacbus->dev); + if (!phydev) { + pr_err("Unable to find PHY\n"); + return -ENODEV; + } + } else { + phydev = dev->phydev; + } + phydev->dev_flags = phy_flags; + + ret = phy_connect_direct(dev, phydev, bcmgenet_mii_setup, + phy_iface); + if (ret) { + pr_err("could not attach to PHY\n"); + return -ENODEV; + } + } + + /* Configure port multiplexer based on what the probed PHY device since + * reading the 'max-speed' property determines the maximum supported + * PHY speed which is needed for bcmgenet_mii_config() to configure + * things appropriately. + */ + ret = bcmgenet_mii_config(dev, true); + if (ret) { + phy_disconnect(dev->phydev); + return ret; + } + + /* The internal PHY has its link interrupts routed to the + * Ethernet MAC ISRs. On GENETv5 there is a hardware issue + * that prevents the signaling of link UP interrupts when + * the link operates at 10Mbps, so fallback to polling for + * those versions of GENET. + */ + if (priv->internal_phy && !GENET_IS_V5(priv)) + dev->phydev->irq = PHY_MAC_INTERRUPT; + + /* Indicate that the MAC is responsible for PHY PM */ + dev->phydev->mac_managed_pm = true; + + return 0; +} + +static struct device_node *bcmgenet_mii_of_find_mdio(struct bcmgenet_priv *priv) +{ + struct device_node *dn = priv->pdev->dev.of_node; + struct device *kdev = &priv->pdev->dev; + char *compat; + + compat = kasprintf(GFP_KERNEL, "brcm,genet-mdio-v%d", priv->version); + if (!compat) + return NULL; + + priv->mdio_dn = of_get_compatible_child(dn, compat); + kfree(compat); + if (!priv->mdio_dn) { + dev_err(kdev, "unable to find MDIO bus node\n"); + return NULL; + } + + return priv->mdio_dn; +} + +static void bcmgenet_mii_pdata_init(struct bcmgenet_priv *priv, + struct unimac_mdio_pdata *ppd) +{ + struct device *kdev = &priv->pdev->dev; + struct bcmgenet_platform_data *pd = kdev->platform_data; + + if (pd->phy_interface != PHY_INTERFACE_MODE_MOCA && pd->mdio_enabled) { + /* + * Internal or external PHY with MDIO access + */ + if (pd->phy_address >= 0 && pd->phy_address < PHY_MAX_ADDR) + ppd->phy_mask = 1 << pd->phy_address; + else + ppd->phy_mask = 0; + } +} + +static int bcmgenet_mii_wait(void *wait_func_data) +{ + struct bcmgenet_priv *priv = wait_func_data; + + wait_event_timeout(priv->wq, + !(bcmgenet_umac_readl(priv, UMAC_MDIO_CMD) + & MDIO_START_BUSY), + HZ / 100); + return 0; +} + +static int bcmgenet_mii_register(struct bcmgenet_priv *priv) +{ + struct platform_device *pdev = priv->pdev; + struct bcmgenet_platform_data *pdata = pdev->dev.platform_data; + struct device_node *dn = pdev->dev.of_node; + struct unimac_mdio_pdata ppd; + struct platform_device *ppdev; + struct resource *pres, res; + int id, ret; + + pres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!pres) { + dev_err(&pdev->dev, "Invalid resource\n"); + return -EINVAL; + } + memset(&res, 0, sizeof(res)); + memset(&ppd, 0, sizeof(ppd)); + + ppd.wait_func = bcmgenet_mii_wait; + ppd.wait_func_data = priv; + ppd.bus_name = "bcmgenet MII bus"; + + /* Unimac MDIO bus controller starts at UniMAC offset + MDIO_CMD + * and is 2 * 32-bits word long, 8 bytes total. + */ + res.start = pres->start + GENET_UMAC_OFF + UMAC_MDIO_CMD; + res.end = res.start + 8; + res.flags = IORESOURCE_MEM; + + if (dn) + id = of_alias_get_id(dn, "eth"); + else + id = pdev->id; + + ppdev = platform_device_alloc(UNIMAC_MDIO_DRV_NAME, id); + if (!ppdev) + return -ENOMEM; + + /* Retain this platform_device pointer for later cleanup */ + priv->mii_pdev = ppdev; + ppdev->dev.parent = &pdev->dev; + if (dn) + ppdev->dev.of_node = bcmgenet_mii_of_find_mdio(priv); + else if (pdata) + bcmgenet_mii_pdata_init(priv, &ppd); + else + ppd.phy_mask = ~0; + + ret = platform_device_add_resources(ppdev, &res, 1); + if (ret) + goto out; + + ret = platform_device_add_data(ppdev, &ppd, sizeof(ppd)); + if (ret) + goto out; + + ret = platform_device_add(ppdev); + if (ret) + goto out; + + return 0; +out: + platform_device_put(ppdev); + return ret; +} + +static int bcmgenet_phy_interface_init(struct bcmgenet_priv *priv) +{ + struct device *kdev = &priv->pdev->dev; + int phy_mode = device_get_phy_mode(kdev); + + if (phy_mode < 0) { + dev_err(kdev, "invalid PHY mode property\n"); + return phy_mode; + } + + priv->phy_interface = phy_mode; + + /* We need to specifically look up whether this PHY interface is + * internal or not *before* we even try to probe the PHY driver + * over MDIO as we may have shut down the internal PHY for power + * saving purposes. + */ + if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL) + priv->internal_phy = true; + + return 0; +} + +static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) +{ + struct device_node *dn = priv->pdev->dev.of_node; + struct phy_device *phydev; + int ret; + + /* Fetch the PHY phandle */ + priv->phy_dn = of_parse_phandle(dn, "phy-handle", 0); + + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ + if (!priv->phy_dn && of_phy_is_fixed_link(dn)) { + ret = of_phy_register_fixed_link(dn); + if (ret) + return ret; + + priv->phy_dn = of_node_get(dn); + } + + /* Get the link mode */ + ret = bcmgenet_phy_interface_init(priv); + if (ret) + return ret; + + /* Make sure we initialize MoCA PHYs with a link down */ + if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { + phydev = of_phy_find_device(dn); + if (phydev) { + phydev->link = 0; + put_device(&phydev->mdio.dev); + } + } + + return 0; +} + +static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv) +{ + struct device *kdev = &priv->pdev->dev; + struct bcmgenet_platform_data *pd = kdev->platform_data; + char phy_name[MII_BUS_ID_SIZE + 3]; + char mdio_bus_id[MII_BUS_ID_SIZE]; + struct phy_device *phydev; + + snprintf(mdio_bus_id, MII_BUS_ID_SIZE, "%s-%d", + UNIMAC_MDIO_DRV_NAME, priv->pdev->id); + + if (pd->phy_interface != PHY_INTERFACE_MODE_MOCA && pd->mdio_enabled) { + snprintf(phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, + mdio_bus_id, pd->phy_address); + + /* + * Internal or external PHY with MDIO access + */ + phydev = phy_attach(priv->dev, phy_name, pd->phy_interface); + if (IS_ERR(phydev)) { + dev_err(kdev, "failed to register PHY device\n"); + return PTR_ERR(phydev); + } + } else { + /* + * MoCA port or no MDIO access. + * Use fixed PHY to represent the link layer. + */ + struct fixed_phy_status fphy_status = { + .link = 1, + .speed = pd->phy_speed, + .duplex = pd->phy_duplex, + .pause = 0, + .asym_pause = 0, + }; + + phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL); + if (IS_ERR(phydev)) { + dev_err(kdev, "failed to register fixed PHY device\n"); + return PTR_ERR(phydev); + } + + /* Make sure we initialize MoCA PHYs with a link down */ + phydev->link = 0; + + } + + priv->phy_interface = pd->phy_interface; + + return 0; +} + +static int bcmgenet_mii_bus_init(struct bcmgenet_priv *priv) +{ + struct device *kdev = &priv->pdev->dev; + struct device_node *dn = kdev->of_node; + + if (dn) + return bcmgenet_mii_of_init(priv); + else if (has_acpi_companion(kdev)) + return bcmgenet_phy_interface_init(priv); + else + return bcmgenet_mii_pd_init(priv); +} + +int bcmgenet_mii_init(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + int ret; + + ret = bcmgenet_mii_register(priv); + if (ret) + return ret; + + ret = bcmgenet_mii_bus_init(priv); + if (ret) + goto out; + + return 0; + +out: + bcmgenet_mii_exit(dev); + return ret; +} + +void bcmgenet_mii_exit(struct net_device *dev) +{ + struct bcmgenet_priv *priv = netdev_priv(dev); + struct device_node *dn = priv->pdev->dev.of_node; + + if (of_phy_is_fixed_link(dn)) + of_phy_deregister_fixed_link(dn); + of_node_put(priv->phy_dn); + clk_prepare_enable(priv->clk); + platform_device_unregister(priv->mii_pdev); + clk_disable_unprepare(priv->clk); +} |