913 files changed, 69952 insertions, 7323 deletions

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b5df38c2a..6b96d75a3 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -36,6 +36,7 @@ config ARM64
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
@@ -132,6 +133,7 @@ config ARM64
 	select GENERIC_ARCH_TOPOLOGY
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
@@ -154,7 +156,7 @@ config ARM64
 	select HAVE_MOVE_PUD
 	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
-	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_COMPILER_H
@@ -196,7 +198,7 @@ config ARM64
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
 		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
-		    !CC_OPTIMIZE_FOR_SIZE)
+		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_SAMPLE_FTRACE_DIRECT
@@ -1516,6 +1518,9 @@ config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
+	def_bool CRASH_CORE
+
 config TRANS_TABLE
 	def_bool y
 	depends on HIBERNATION || KEXEC_CORE
@@ -1534,15 +1539,15 @@ config XEN
 
 # include/linux/mmzone.h requires the following to be true:
 #
-#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#   MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 #
-# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+# so the maximum value of MAX_PAGE_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
 #
-#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
-# ----+-------------------+--------------+-----------------+--------------------+
-# 4K  |       27          |      12      |       15        |         10         |
-# 16K |       27          |      14      |       13        |         11         |
-# 64K |       29          |      16      |       13        |         13         |
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_PAGE_ORDER  |  default MAX_PAGE_ORDER |
+# ----+-------------------+--------------+----------------------+-------------------------+
+# 4K  |       27          |      12      |       15             |         10              |
+# 16K |       27          |      14      |       13             |         11              |
+# 64K |       29          |      16      |       13             |         13              |
 config ARCH_FORCE_MAX_ORDER
 	int
 	default "13" if ARM64_64K_PAGES
@@ -1550,21 +1555,21 @@ config ARCH_FORCE_MAX_ORDER
 	default "10"
 	help
 	  The kernel page allocator limits the size of maximal physically
-	  contiguous allocations. The limit is called MAX_ORDER and it
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
 	  defines the maximal power of two of number of pages that can be
 	  allocated as a single contiguous block. This option allows
 	  overriding the default setting when ability to allocate very
 	  large blocks of physically contiguous memory is required.
 
 	  The maximal size of allocation cannot exceed the size of the
-	  section, so the value of MAX_ORDER should satisfy
+	  section, so the value of MAX_PAGE_ORDER should satisfy
 
-	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+	    MAX_PAGE_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
 
 	  Don't change if unsure.
 
 config UNMAP_KERNEL_AT_EL0
-	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	bool "Unmap kernel when running in userspace (KPTI)" if EXPERT
 	default y
 	help
 	  Speculation attacks against some high-performance processors can
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 606912019..24335565b 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -244,6 +244,18 @@ config ARCH_NPCM
 	  General support for NPCM8xx BMC (Arbel).
 	  Nuvoton NPCM8xx BMC based on the Cortex A35.
 
+config ARCH_PENSANDO
+	bool "AMD Pensando Platforms"
+	help
+	  This enables support for the ARMv8 based AMD Pensando SoC
+	  family to include the Elba SoC.
+
+	  AMD Pensando SoCs support a range of Distributed Services
+	  Cards in PCIe format installed into servers.  The Elba
+	  SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable
+	  cores for a minimal latency/jitter datapath, and network
+	  interfaces up to 200 Gb/s.
+
 config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select GPIOLIB
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 26b8c7630..a88cdf910 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -169,12 +169,6 @@ install: KBUILD_IMAGE := $(boot)/Image
 install zinstall:
 	$(call cmd,install)
 
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
-	$(if $(CONFIG_COMPAT_VDSO), \
-		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
-
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
@@ -201,10 +195,13 @@ vdso_prepare: prepare0
 	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
 ifdef CONFIG_COMPAT_VDSO
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
-	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+	arch/arm64/kernel/vdso32/vdso.so
 endif
 endif
 
+vdso-install-y				+= arch/arm64/kernel/vdso/vdso.so.dbg
+vdso-install-$(CONFIG_COMPAT_VDSO)	+= arch/arm64/kernel/vdso32/vdso32.so.dbg
+
 include $(srctree)/scripts/Makefile.defconf
 
 PHONY += virtconfig
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index 1761f5972..a5a787371 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -44,7 +44,7 @@ EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
 EFI_ZBOOT_MACH_TYPE	:= ARM64
 EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
 
-EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$$( \
 				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
 
 include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 3b0ad5406..1f1f8d865 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -38,6 +38,10 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 9ec49ac2f..381d58cea 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -291,6 +291,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 4903d6358..855b7d43b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -166,6 +166,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index ca1d287a0..d11e5041b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -406,6 +406,7 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			spdif_tx_pin: spdif-tx-pin {
 				pins = "PH7";
 				function = "spdif";
@@ -655,10 +656,8 @@
 			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
 			clock-names = "apb", "spdif";
 			resets = <&ccu RST_BUS_SPDIF>;
-			dmas = <&dma 2>;
-			dma-names = "tx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spdif_tx_pin>;
+			dmas = <&dma 2>, <&dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
new file mode 100644
index 000000000..dbce61b35
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech CB1";
+	compatible = "bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
new file mode 100644
index 000000000..1fed2b46c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+		};
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board wide 5V supply from carrier boards */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	/* Card detection pin is not connected */
+	broken-cd;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	mmc-ddr-1_8v;
+	status = "okay";
+
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313a: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators{
+			reg_dcdc1: dcdc1 {
+				regulator-name = "vdd-gpu-sys";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-always-on;
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-name = "vdd-cpu";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <200>;
+				regulator-always-on;
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-name = "vcc-dram";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-name = "vcc-1v8-pll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-name = "vcc-3v3-io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
new file mode 100644
index 000000000..832f08b2b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2023 Martin Botka <martin@biqu3d.com>.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-bigtreetech-cb1.dtsi"
+
+/ {
+	model = "BigTreeTech Pi";
+	compatible = "bigtreetech,pi", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 74aed0d23..d549d277d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -133,6 +133,13 @@
 			#reset-cells = <1>;
 		};
 
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		watchdog: watchdog@30090a0 {
 			compatible = "allwinner,sun50i-h616-wdt",
 				     "allwinner,sun6i-a31-wdt";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
new file mode 100644
index 000000000..21ca19770
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero 2W";
+	compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* SY8089 DC/DC converter */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+		regulator-always-on;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on the FPC connector (or the exansion board) */
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;	/* internally via VCC-IO */
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
new file mode 100644
index 000000000..8ea1fd41a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Transpeed 8K618-T";
+	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		/* discrete 3.3V regulator */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dldo1>;
+	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-1v8-pll";
+			};
+
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-io-mmc";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 439497ab9..072fe20cf 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -59,6 +59,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,stratix10-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,stratix10-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <0 170 4>,
@@ -125,7 +144,7 @@
 		};
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -133,13 +152,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,stratix10-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -510,6 +522,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 7>;
 			status = "disabled";
 		};
@@ -620,18 +633,6 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,stratix10-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,stratix10-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 
 	usbphy0: usbphy0 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 468fcc7da..26173f0b0 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -66,14 +66,14 @@
 };
 
 &pinctrl0 {
-	i2c1_pmx_func: i2c1-pmx-func {
+	i2c1_pmx_func: i2c1-pmx-func-pins {
 		pinctrl-single,pins = <
 			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
 		>;
 	};
 
-	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
 		pinctrl-single,pins = <
 			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
 			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
@@ -187,8 +187,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 532164a63..81d0e914a 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -51,7 +51,7 @@
 		regulator-max-microvolt = <330000>;
 	};
 
-	soc {
+	soc@0 {
 		eccmgr {
 			sdmmca-ecc@ff8c8c00 {
 				compatible = "altr,socfpga-s10-sdmmc-ecc",
@@ -102,7 +102,7 @@
 &nand {
 	status = "okay";
 
-	flash@0 {
+	nand@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,8 +176,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <1>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
index ff413f8e3..0d837d3e6 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -80,8 +80,6 @@
 
 &mmc {
 	status = "okay";
-	altr,dw-mshc-ciu-div = <0x3>;
-	altr,dw-mshc-sdr-timing = <0x0 0x3>;
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
 	broken-cd;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index dccbba6e7..dbf2dce8d 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -145,7 +145,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <160>;
 			al,msi-num-spis = <160>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index 39481d7fd..3ea178acd 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -355,7 +355,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <336>;
 			al,msi-num-spis = <959>;
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index 68103a8b0..8502cc2af 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PENSANDO) += elba-asic.dtb
 dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
index 21149acb6..1a65f1ec1 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -64,7 +64,6 @@
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 		voltage-ranges = <3200 3400>;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,com-mode = <0x0>;
 		pl022,rx-level-trig = <0>;
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
index 99205ae1b..52f8d3629 100644
--- a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -76,7 +76,6 @@
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 		voltage-ranges = <3200 3400>;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,com-mode = <0x0>;
 		pl022,rx-level-trig = <0>;
diff --git a/arch/arm64/boot/dts/amd/elba-16core.dtsi b/arch/arm64/boot/dts/amd/elba-16core.dtsi
new file mode 100644
index 000000000..568bcc39c
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-16core.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2023 Advanced Micro Devices, Inc.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 { cpu = <&cpu0>; };
+				core1 { cpu = <&cpu1>; };
+				core2 { cpu = <&cpu2>; };
+				core3 { cpu = <&cpu3>; };
+			};
+
+			cluster1 {
+				core0 { cpu = <&cpu4>; };
+				core1 { cpu = <&cpu5>; };
+				core2 { cpu = <&cpu6>; };
+				core3 { cpu = <&cpu7>; };
+			};
+
+			cluster2 {
+				core0 { cpu = <&cpu8>; };
+				core1 { cpu = <&cpu9>; };
+				core2 { cpu = <&cpu10>; };
+				core3 { cpu = <&cpu11>; };
+			};
+
+			cluster3 {
+				core0 { cpu = <&cpu12>; };
+				core1 { cpu = <&cpu13>; };
+				core2 { cpu = <&cpu14>; };
+				core3 { cpu = <&cpu15>; };
+			};
+		};
+
+		/* CLUSTER 0 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			next-level-cache = <&l2_0>;
+			enable-method = "psci";
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 1 */
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 2 */
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		cpu11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			next-level-cache = <&l2_2>;
+			enable-method = "psci";
+		};
+
+		l2_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		/* CLUSTER 3 */
+		cpu12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		cpu15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			next-level-cache = <&l2_3>;
+			enable-method = "psci";
+		};
+
+		l2_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic-common.dtsi b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
new file mode 100644
index 000000000..46b6c6783
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic-common.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+&ahb_clk {
+	clock-frequency = <400000000>;
+};
+
+&emmc_clk {
+	clock-frequency = <200000000>;
+};
+
+&flash_clk {
+	clock-frequency = <400000000>;
+};
+
+&ref_clk {
+	clock-frequency = <156250000>;
+};
+
+&qspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <0>;
+		cdns,tsd2d-ns = <0>;
+		cdns,tchsh-ns = <0>;
+		cdns,tslch-ns = <0>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&wdt0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-cs = <4>;
+	cs-gpios = <0>, <0>, <&porta 1 GPIO_ACTIVE_LOW>,
+		   <&porta 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amd/elba-asic.dts b/arch/arm64/boot/dts/amd/elba-asic.dts
new file mode 100644
index 000000000..c3f4da2f7
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-asic.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Device Tree file for AMD Pensando Elba Board.
+ *
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+#include "elba.dtsi"
+#include "elba-16core.dtsi"
+#include "elba-asic-common.dtsi"
+#include "elba-flash-parts.dtsi"
+
+/ {
+	model = "AMD Pensando Elba Board";
+	compatible = "amd,pensando-elba-ortano", "amd,pensando-elba";
+
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+		spi1 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
new file mode 100644
index 000000000..cf761a05a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba-flash-parts.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2023 Advanced Micro Devices, Inc.
+ */
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "rsvd";
+			reg = <0x0 0x10000>;
+			read-only;
+		};
+
+		partition@10000 {
+			label = "flash";
+			reg = <0x10000 0xfff0000>;
+		};
+
+		partition@f0000 {
+			label = "golduenv";
+			reg = <0xf0000 0x10000>;
+		};
+
+		partition@100000 {
+			label = "boot0";
+			reg = <0x100000 0x80000>;
+		};
+
+		partition@180000 {
+			label = "golduboot";
+			reg = <0x180000 0x200000>;
+		};
+
+		partition@380000 {
+			label = "brdcfg0";
+			reg = <0x380000 0x10000>;
+		};
+
+		partition@390000 {
+			label = "brdcfg1";
+			reg = <0x390000 0x10000>;
+		};
+
+		partition@400000 {
+			label = "goldfw";
+			reg = <0x400000 0x3c00000>;
+		};
+
+		partition@4010000 {
+			label = "fwmap";
+			reg = <0x4010000 0x20000>;
+		};
+
+		partition@4030000 {
+			label = "fwsel";
+			reg = <0x4030000 0x20000>;
+		};
+
+		partition@4090000 {
+			label = "bootlog";
+			reg = <0x4090000 0x20000>;
+		};
+
+		partition@40b0000 {
+			label = "panicbuf";
+			reg = <0x40b0000 0x20000>;
+		};
+
+		partition@40d0000 {
+			label = "uservars";
+			reg = <0x40d0000 0x20000>;
+		};
+
+		partition@4200000 {
+			label = "uboota";
+			reg = <0x4200000 0x400000>;
+		};
+
+		partition@4600000 {
+			label = "ubootb";
+			reg = <0x4600000 0x400000>;
+		};
+
+		partition@4a00000 {
+			label = "mainfwa";
+			reg = <0x4a00000 0x1000000>;
+		};
+
+		partition@5a00000 {
+			label = "mainfwb";
+			reg = <0x5a00000 0x1000000>;
+		};
+
+		partition@6a00000 {
+			label = "diaguboot";
+			reg = <0x6a00000 0x400000>;
+		};
+
+		partition@6e00000 {
+			label = "spare";
+			reg = <0x6e00000 0x1200000>;
+		};
+
+		partition@8000000 {
+			label = "diagfw";
+			reg = <0x8000000 0x7fe0000>;
+		};
+
+		partition@ffe0000 {
+			label = "ubootenv";
+			reg = <0xffe0000 0x10000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/elba.dtsi b/arch/arm64/boot/dts/amd/elba.dtsi
new file mode 100644
index 000000000..674890cf2
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/elba.dtsi
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+/*
+ * Copyright 2020-2022 Advanced Micro Devices, Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/interrupt-controller/arm-gic.h"
+
+/ {
+	model = "Elba ASIC Board";
+	compatible = "amd,pensando-elba";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	dma-coherent;
+
+	ahb_clk: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	emmc_clk: oscillator2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	flash_clk: oscillator3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ref_clk: oscillator4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		i2c0: i2c@400 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-sda-hold-time-ns = <480>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@1400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		qspi: spi@2400 {
+			compatible = "amd,pensando-elba-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x2400 0x0 0x400>,
+			      <0x0 0x7fff0000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&flash_clk>;
+			cdns,fifo-depth = <1024>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x7fff0000>;
+			status = "disabled";
+		};
+
+		spi0: spi@2800 {
+			compatible = "amd,pensando-elba-spi";
+			reg = <0x0 0x2800 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amd,pensando-elba-syscon = <&syscon>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <2>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@4000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x4000 0x0 0x78>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			porta: gpio-port@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				#interrupt-cells = <2>;
+			};
+
+			portb: gpio-port@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+			};
+		};
+
+		uart0: serial@4800 {
+			compatible = "ns16550a";
+			reg = <0x0 0x4800 0x0 0x100>;
+			clocks = <&ref_clk>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		gic: interrupt-controller@800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x800000 0x0 0x200000>,	/* GICD */
+			      <0x0 0xa00000 0x0 0x200000>,	/* GICR */
+			      <0x0 0x60000000 0x0 0x2000>,	/* GICC */
+			      <0x0 0x60010000 0x0 0x1000>,	/* GICH */
+			      <0x0 0x60020000 0x0 0x2000>;	/* GICV */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#interrupt-cells = <3>;
+			ranges;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			/*
+			 * Elba specific pre-ITS is enabled using the
+			 * existing property socionext,synquacer-pre-its
+			 */
+			gic_its: msi-controller@820000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x820000 0x0 0x10000>;
+				msi-controller;
+				#msi-cells = <1>;
+				socionext,synquacer-pre-its =
+							<0xc00000 0x1000000>;
+			};
+		};
+
+		emmc: mmc@30440000 {
+			compatible = "amd,pensando-elba-sd4hc", "cdns,sd4hc";
+			reg = <0x0 0x30440000 0x0 0x10000>,
+			      <0x0 0x30480044 0x0 0x4>;	/* byte-lane ctrl */
+			clocks = <&emmc_clk>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,phy-input-delay-sd-highspeed = <0x4>;
+			cdns,phy-input-delay-legacy = <0x4>;
+			cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>;
+			cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>;
+			mmc-ddr-1_8v;
+			status = "disabled";
+		};
+
+		syscon: syscon@307c0000 {
+			compatible = "amd,pensando-elba-syscon", "syscon";
+			reg = <0x0 0x307c0000 0x0 0x3000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8b6f57a94..cc8b34bd5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
 dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad402.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
@@ -17,6 +18,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
@@ -72,6 +74,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-s905d3-libretech-cc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 998f50507..2ad1f8eef 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -81,6 +81,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,c3-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index 1423d4a79..a03c7667d 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/amlogic,t7-pwrc.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -118,6 +119,11 @@
 
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,t7-pwrc";
+			#power-domain-cells = <1>;
+		};
 	};
 
 	soc {
@@ -143,6 +149,28 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			watchdog@2100 {
+				compatible = "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,t7-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x0064>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 157>;
+				};
+			};
+
 			uart_a: serial@78000 {
 				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
 				reg = <0x0 0x78000 0x0 0x18>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
new file mode 100644
index 000000000..1c20516fa
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 SberDevices
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+
+/ {
+	compatible = "amlogic,ad402", "amlogic,a1";
+	model = "Amlogic Meson A1 AD402 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+
+	reserved-memory {
+		/* 3 MiB reserved for Amlogic Trust OS (BL32) */
+		secos_reserved: secos@3d00000 {
+			reg = <0x0 0x03d00000 0x0 0x300000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	battery_4v2: regulator-battery-4v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vddq_1v35: regulator-vddq-1v35 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_1V35";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&battery_4v2>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&battery_4v2>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_1v8: regulator-vddio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+};
+
+/* Bluetooth HCI H4 */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO_B {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_1v8>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&spifc_pins>;
+	pinctrl-names = "default";
+
+	spi_nand@0 {
+		compatible = "spi-nand";
+		status = "okay";
+		reg = <0>;
+		spi-max-frequency = <96000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_3v3>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&sd_emmc {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_1v8>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 96225c421..648e7f494 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -3,9 +3,13 @@
  * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
 #include <dt-bindings/gpio/meson-a1-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -41,6 +45,15 @@
 		};
 	};
 
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc_periphs CLKID_OTP>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		secure-monitor = <&sm>;
+		power-domains = <&pwrc PWRC_OTP_ID>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -66,7 +79,6 @@
 		pwrc: power-controller {
 			compatible = "amlogic,meson-a1-pwrc";
 			#power-domain-cells = <1>;
-			status = "okay";
 		};
 	};
 
@@ -76,6 +88,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		spifc: spi@fd000400 {
+			compatible = "amlogic,a1-spifc";
+			reg = <0x0 0xfd000400 0x0 0x290>;
+			clocks = <&clkc_periphs CLKID_SPIFC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&pwrc PWRC_SPIFC_ID>;
+			status = "disabled";
+		};
+
 		apb: bus@fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x1000000>;
@@ -83,7 +105,6 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
-
 			reset: reset-controller@0 {
 				compatible = "amlogic,meson-a1-reset";
 				reg = <0x0 0x0 0x0 0x8c>;
@@ -105,6 +126,196 @@
 					gpio-ranges = <&periphs_pinctrl 0 0 62>;
 				};
 
+				i2c0_f11_pins: i2c0-f11 {
+					mux {
+						groups = "i2c0_sck_f11",
+							 "i2c0_sda_f12";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_f9_pins: i2c0-f9 {
+					mux {
+						groups = "i2c0_sck_f9",
+							 "i2c0_sda_f10";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_x_pins: i2c1-x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_a_pins: i2c1-a {
+					mux {
+						groups = "i2c1_sck_a",
+							 "i2c1_sda_a";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x0_pins: i2c2-x0 {
+					mux {
+						groups = "i2c2_sck_x0",
+							 "i2c2_sda_x1";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x15_pins: i2c2-x15 {
+					mux {
+						groups = "i2c2_sck_x15",
+							 "i2c2_sda_x16";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a4_pins: i2c2-a4 {
+					mux {
+						groups = "i2c2_sck_a4",
+							 "i2c2_sda_a5";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a8_pins: i2c2-a8 {
+					mux {
+						groups = "i2c2_sck_a8",
+							 "i2c2_sda_a9";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_x_pins: i2c3-x {
+					mux {
+						groups = "i2c3_sck_x",
+							 "i2c3_sda_x";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_f_pins: i2c3-f {
+					mux {
+						groups = "i2c3_sck_f",
+							 "i2c3_sda_f";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				uart_a_pins: uart-a {
+					mux {
+						groups = "uart_a_tx",
+							 "uart_a_rx";
+						function = "uart_a";
+					};
+				};
+
+				uart_a_cts_rts_pins: uart-a-cts-rts {
+					mux {
+						groups = "uart_a_cts",
+							 "uart_a_rts";
+						function = "uart_a";
+						bias-pull-down;
+					};
+				};
+
+				sdio_pins: sdio {
+					mux0 {
+						groups = "sdcard_d0_x",
+							 "sdcard_d1_x",
+							 "sdcard_d2_x",
+							 "sdcard_d3_x",
+							 "sdcard_cmd_x";
+						function = "sdcard";
+						bias-pull-up;
+					};
+
+					mux1 {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate {
+					mux {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-pull-down;
+					};
+				};
+
+				spifc_pins: spifc {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold_n",
+							 "spif_wp_n";
+						function = "spif";
+					};
+				};
+			};
+
+			gpio_intc: interrupt-controller@440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+
+			clkc_periphs: clock-controller@800 {
+				compatible = "amlogic,a1-peripherals-clkc";
+				reg = <0 0x800 0 0x104>;
+				#clock-cells = <1>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&xtal>;
+				clock-names = "fclk_div2", "fclk_div3",
+					      "fclk_div5", "fclk_div7",
+					      "hifi_pll", "xtal";
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1400 0x0 0x20>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
 			};
 
 			uart_AO: serial@1c00 {
@@ -127,14 +338,148 @@
 				status = "disabled";
 			};
 
-			gpio_intc: interrupt-controller@0440 {
-				compatible = "amlogic,meson-a1-gpio-intc",
-					     "amlogic,meson-gpio-intc";
-				reg = <0x0 0x0440 0x0 0x14>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				amlogic,channel-interrupts =
-					<49 50 51 52 53 54 55 56>;
+			saradc: adc@2c00 {
+				compatible = "amlogic,meson-g12a-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x2c00 0x0 0x48>;
+				#io-channel-cells = <1>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					<&clkc_periphs CLKID_SARADC_EN>,
+					<&clkc_periphs CLKID_SARADC>,
+					<&clkc_periphs CLKID_SARADC_SEL>;
+				clock-names = "clkin", "core",
+					"adc_clk", "adc_sel";
+				status = "disabled";
+			};
+
+			i2c1: i2c@5c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x5c00 0x0 0x20>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c2: i2c@6800 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6800 0x0 0x20>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c3: i2c@6c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6c00 0x0 0x20>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			usb2_phy1: phy@4000 {
+				compatible = "amlogic,a1-usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY_IN>;
+				clock-names = "xtal";
+				reg = <0x0 0x4000 0x0 0x60>;
+				resets = <&reset RESET_USBPHY>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+				power-domains = <&pwrc PWRC_USB_ID>;
+			};
+
+			hwrng: rng@5118 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x5118 0x0 0x4>;
+				power-domains = <&pwrc PWRC_OTP_ID>;
+			};
+
+			sec_AO: ao-secure@5a20 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x5a20 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			clkc_pll: pll-clock-controller@7c80 {
+				compatible = "amlogic,a1-pll-clkc";
+				reg = <0 0x7c80 0 0x18c>;
+				#clock-cells = <1>;
+				clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+					 <&clkc_periphs CLKID_HIFIPLL_IN>;
+				clock-names = "fixpll_in", "hifipll_in";
+			};
+
+			sd_emmc: sd@10000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x10000 0x0 0x800>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_A>,
+					 <&clkc_periphs CLKID_SD_EMMC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core",
+					      "clkin0",
+					      "clkin1";
+				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>;
+				assigned-clock-parents = <&xtal>;
+				resets = <&reset RESET_SD_EMMC_A>;
+				power-domains = <&pwrc PWRC_SD_EMMC_ID>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@fe004400 {
+			status = "disabled";
+			compatible = "amlogic,meson-a1-usb-ctrl";
+			reg = <0x0 0xfe004400 0x0 0xa0>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc_periphs CLKID_USB_CTRL>,
+				 <&clkc_periphs CLKID_USB_BUS>,
+				 <&clkc_periphs CLKID_USB_CTRL_IN>;
+			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			resets = <&reset RESET_USBCTRL>;
+			reset-name = "usb_ctrl";
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc3: usb@ff400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff400000 0x0 0x100000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
+			};
+
+			dwc2: usb@ff500000 {
+				compatible = "amlogic,meson-a1-usb", "snps,dwc2";
+				reg = <0x0 0xff500000 0x0 0x40000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY>;
+				clock-names = "otg";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4..8a18ce948 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -30,8 +30,20 @@
 &uart_B {
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b00c..c356bd2cc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@
 &sd_emmc_b {
 	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
 };
+
+&i2c_AO {
+	/* EEPROM on base board */
+	eeprompd: eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <0x20>;
+		label = "eeprompd";
+		address-width = <0x10>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index df16eead2..c8905663b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -66,7 +66,6 @@
 		VDDA-supply = <&vcc_3v3>;
 		VDDP-supply = <&vcc_3v3>;
 		VDDD-supply = <&vcc_3v3>;
-		status = "okay";
 		sound-name-prefix = "Linein";
 	};
 
@@ -75,14 +74,12 @@
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
 		PVDD-supply = <&vcc_5v>;
-		status = "okay";
 		sound-name-prefix = "Lineout";
 	};
 
 	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -91,14 +88,12 @@
 		compatible = "dmic-codec";
 		num-channels = <7>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
 	spdif_dir: audio-codec-4 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dir";
-		status = "okay";
 		sound-name-prefix = "DIR";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 768d0ed78..7e5ac9db9 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -432,6 +432,27 @@
 					};
 				};
 
+				nand_all_pins: nand-all-pins {
+					mux {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "nand_ce0",
+							 "nand_ale",
+							 "nand_cle",
+							 "nand_wen_clk",
+							 "nand_ren_wr";
+						function = "nand";
+						input-enable;
+						bias-pull-up;
+					};
+				};
+
 				emmc_ds_pins: emmc_ds {
 					mux {
 						groups = "emmc_ds";
@@ -1908,6 +1929,21 @@
 				resets = <&reset RESET_SD_EMMC_C>;
 			};
 
+			nfc: nand-controller@7800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x7800 0x0 0x100>,
+				      <0x0 0x7000 0x0 0x800>;
+				reg-names = "nfc", "emmc";
+				pinctrl-0 = <&nand_all_pins>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_SD_EMMC_C>,
+					 <&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+			};
+
 			usb2_phy1: phy@9020 {
 				compatible = "amlogic,meson-gxl-usb2-phy";
 				#phy-cells = <0>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 6a1f4dcf6..e732df3f3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -15,10 +15,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_A";
-		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -26,10 +26,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_B";
-		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 
@@ -37,10 +37,10 @@
 		compatible = "amlogic,axg-tdm-iface";
 		#sound-dai-cells = <0>;
 		sound-name-prefix = "TDM_C";
-		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
-			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
-		clock-names = "mclk", "sclk", "lrclk";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_MCLK>;
+		clock-names = "sclk", "lrclk", "mclk";
 		status = "disabled";
 	};
 };
@@ -195,8 +195,7 @@
 		};
 
 		tdmin_a: audio-controller@300 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x300 0x0 0x40>;
 			sound-name-prefix = "TDMIN_A";
 			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
@@ -211,8 +210,7 @@
 		};
 
 		tdmin_b: audio-controller@340 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x340 0x0 0x40>;
 			sound-name-prefix = "TDMIN_B";
 			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
@@ -227,8 +225,7 @@
 		};
 
 		tdmin_c: audio-controller@380 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x380 0x0 0x40>;
 			sound-name-prefix = "TDMIN_C";
 			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
@@ -243,8 +240,7 @@
 		};
 
 		tdmin_lb: audio-controller@3c0 {
-			compatible = "amlogic,g12a-tdmin",
-				     "amlogic,axg-tdmin";
+			compatible = "amlogic,g12a-tdmin";
 			reg = <0x0 0x3c0 0x0 0x40>;
 			sound-name-prefix = "TDMIN_LB";
 			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
@@ -272,12 +268,12 @@
 			status = "disabled";
 		};
 
-		spdifout: audio-controller@480 {
+		spdifout_a: audio-controller@480 {
 			compatible = "amlogic,g12a-spdifout",
 				     "amlogic,axg-spdifout";
 			reg = <0x0 0x480 0x0 0x50>;
 			#sound-dai-cells = <0>;
-			sound-name-prefix = "SPDIFOUT";
+			sound-name-prefix = "SPDIFOUT_A";
 			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
 				 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
 			clock-names = "pclk", "mclk";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 0ad0c2b7d..4c4550dd4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -45,7 +45,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 4b5d11e56..8355ddd7e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -8,6 +8,8 @@
 #include "meson-g12a.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
 
 / {
 	compatible = "amlogic,u200", "amlogic,g12a";
@@ -18,6 +20,26 @@
 		ethernet0 = &ethmac;
 	};
 
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "10U2";
+	};
+
+	spdif_dir: audio-codec-0 {
+		compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "DIR";
+	};
+
+	spdif_dit: audio-codec-1 {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "DIT";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -147,6 +169,216 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "U200";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+				 <&tdmin_lb>, <&dioo2133>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
+				"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
+				"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
+				"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 3", "TDM_A Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 3", "TDM_A Capture",
+				"TDMIN_LB IN 4", "TDM_B Capture",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TDMIN_LB IN 0", "TDM_A Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"10U2 INL", "ACODEC LOLP",
+				"10U2 INR", "ACODEC LORP",
+				"Lineout", "10U2 OUTL",
+				"Lineout", "10U2 OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* Connected to the WIFI/BT chip */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "dsp_a";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_A>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* Connected to the onboard AD82584F DAC */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* 8ch HDMI interface */
+		dai-link-8 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+		};
+
+		/* spdif hdmi and coax output */
+		dai-link-9 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-10 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-11 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* internal codec glue */
+		dai-link-12 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+
+		/* spdif coax input */
+		dai-link-13 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+	};
+};
+
+&acodec {
+	status = "okay";
+};
+
+&arb {
+	status = "okay";
 };
 
 &cec_AO {
@@ -163,6 +395,10 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
@@ -191,6 +427,10 @@
 	clock-latency = <50000>;
 };
 
+&clkc_audio {
+	status = "okay";
+};
+
 &cvbs_vdac_port {
 	cvbs_vdac_out: endpoint {
 		remote-endpoint = <&cvbs_connector_in>;
@@ -203,6 +443,18 @@
 	phy-mode = "rmii";
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -288,6 +540,95 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&spdifin {
+	pinctrl-0 = <&spdif_in_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_ao_out_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
+		    <&tdm_b_dout0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>, <0>;
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 7ca904f5a..9b55982b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -155,9 +154,9 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -196,7 +195,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -456,7 +455,7 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
new file mode 100644
index 000000000..65b963d79
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-g12b-a311d.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+	compatible = "libretech,aml-a311d-cc", "amlogic,a311d", "amlogic,g12b";
+	model = "Libre Computer AML-A311D-CC Alta";
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1011000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+	};
+
+	sound {
+		model = "LC-ALTA";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_C IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>, <&pwm_b_x7_pins>;
+	clocks = <&xtal>, <&xtal>;
+	clock-names = "clkin0", "clkin1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 995ce10d5..08c33ec7e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -369,7 +369,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 0a6a12808..4b8db872b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -487,7 +487,7 @@
 
 	bluetooth {
 		compatible = "realtek,rtl8822cs-bt";
-		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
index 3e826095e..0da386cab 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -22,7 +22,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -34,9 +33,9 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -75,7 +74,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -139,7 +138,7 @@
 	};
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index 098a3af6d..6396f190d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
@@ -29,9 +28,9 @@
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
 				"TDM_B Playback", "TDMOUT_B OUT",
-				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
-				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
-				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -70,7 +69,7 @@
 
 		/* spdif hdmi or toslink interface */
 		dai-link-4 {
-			sound-dai = <&spdifout>;
+			sound-dai = <&spdifout_a>;
 
 			codec-0 {
 				sound-dai = <&spdif_dit>;
@@ -125,7 +124,7 @@
 	linux,rc-map-name = "rc-khadas";
 };
 
-&spdifout {
+&spdifout_a {
 	pinctrl-0 = <&spdif_out_h_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 18f7b7302..e59c3c92b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -26,7 +26,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
index e238f1f10..f28452b9f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -18,7 +18,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 3c93d1898..591455c50 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -9,11 +9,18 @@
 
 #include "meson-gxbb-p20x.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		sound-name-prefix = "DIT";
+	};
+
 	avdd18_usb_adc: regulator-avdd18_usb_adc {
 		compatible = "regulator-fixed";
 		regulator-name = "AVDD18_USB_ADC";
@@ -57,6 +64,58 @@
 			press-threshold-microvolt = <0>; /* 0% */
 		};
 	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P200";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
index 150a82f3b..6f81eed83 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -8,10 +8,49 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	compatible = "amlogic,p201", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P201 Development Board";
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P201";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e8303089b..74df32534 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -21,7 +21,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
index e1b74b174..376760d86 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -17,7 +17,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 7d525bdb0..ad2dd4ad0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -28,7 +28,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 50d49aec4..d05dde8da 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -37,7 +37,6 @@
 	spdif_dit: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
-		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
new file mode 100644
index 000000000..35e8f5bae
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-libretech-cottonwood.dtsi
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "10U2";
+	};
+
+	/* TOFIX: handle CVBS_DET on SARADC channel 0 */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-blue {
+		compatible = "pwm-leds";
+
+		led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_ACTIVITY;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm_ab 1 1250 0>;
+			active-low;
+		};
+	};
+
+	led-green {
+		compatible = "pwm-leds";
+
+		led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "default-on";
+			max-brightness = <255>;
+			pwms = <&pwm_cd 1 1250 0>;
+			active-low;
+		};
+	};
+
+	led-orange {
+		compatible = "gpio-leds";
+
+		led {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	flash_1v8: regulator-flash-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vddao_3v3>;
+
+		/* FIXME: controlled by TEST_N */
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&dc_in>;
+		gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&dc_in>;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1011000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vddao_3v3>;
+	};
+
+	vddio_c: regulator-vddio_c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+		vin-supply = <&vddao_3v3>;
+		gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+				 <&dioo2133>;
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/*
+		 * Audio setup: The 40 pins header provides access to 2 TDMs,
+		 * SPDIF In/Out and PDM inputs.
+		 * - TDM A: 2 lanes
+		 *    D0:    40/X9
+		 *    D1:    38/X8
+		 *    BCLK:  12/X11
+		 *    FS:    35/X10
+		 * - TDM B: 4 lanes
+		 *    D0:    37/A3
+		 *    D1:    16/A4
+		 *    D2:    18/A5 or 7/AO6
+		 *    D3:    22/A6 or 21/H5
+		 *    BCLK:  29/A1 or 8/AO8
+		 *    FS:    31/A2 or 11/AO7
+		 * - 2 Master Clocks:
+		 *    MCLK0: 15/A0 or 10/AO9
+		 *    MCLK1: 33/X15
+		 * - SPDIF:
+		 *    OUT:   32/A11
+		 *    IN:    21/H5
+		 * - PDM Input:
+		 *    DO:    13/A8
+		 *    D1:    26/A9
+		 *    D2:    22/A6
+		 *    D3:    18/A5
+		 *    DCLK:  36/A7
+		 *
+		 * TDM C is not usable on the 40 pins connector so it is
+		 * setup for the HDMI 4 lanes i2s.
+		 *
+		 * No pinctrl is enabled by default to preserve the
+		 * genericity of the 40 pins header. Many configurations are
+		 * possible based on the desired use case. Please adjust TDM
+		 * masks, clock setups and pinctrl accordingly.
+		 */
+
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "dsp_a";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_A>;
+			};
+		};
+
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-rx-mask-1 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		dai-link-8 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-10 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	status = "okay";
+	AVDD-supply = <&vddio_ao18>;
+};
+
+&arb {
+	status = "okay";
+};
+
+&cecb_AO {
+	status = "okay";
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub: hub@1 {
+		compatible = "usb5e3,626";
+		reg = <1>;
+		reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&vcc_5v>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <100000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&periphs_pinctrl {
+	spi_cs_disable_pins: spi-cs-disable {
+		mux {
+			groups = "BOOT_14";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	eth_phy_irq_pins: eth-phy-irq {
+		mux {
+			groups = "GPIOZ_14";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&pwm_AO_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_b_x7_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_d_x3_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>,
+		    <&spi_cs_disable_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>;
+
+	w25lq128d: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy1 {
+	phy-supply = <&dc_in>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
index 8ffbcb2b1..983caddc4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -15,7 +15,7 @@
 	#size-cells = <2>;
 
 	aliases {
-		serial0 = &uart_B;
+		serial0 = &uart_b;
 	};
 
 	memory@0 {
@@ -23,8 +23,70 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 52 MiB reserved for ARM Trusted Firmware */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x3400000>;
+			no-map;
+		};
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_pins>;
+	pinctrl-names = "default";
+};
+
+&nand {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-on-flash-bbt;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x00200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "system";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "media";
+			reg = <0x04000000 0x8000000>;
+		};
+	};
 };
 
-&uart_B {
+&spicc0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spicc0_pins_x>;
+	cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index f24460186..ce90b3568 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -6,6 +6,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-s4-gpio.h>
+#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h>
+#include <dt-bindings/power/meson-s4-power.h>
 
 / {
 	cpus {
@@ -92,6 +96,44 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			clkc_periphs: clock-controller@0 {
+				compatible = "amlogic,s4-peripherals-clkc";
+				reg = <0x0 0x0 0x0 0x49c>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					<&clkc_pll CLKID_FCLK_DIV2P5>,
+					<&clkc_pll CLKID_FCLK_DIV3>,
+					<&clkc_pll CLKID_FCLK_DIV4>,
+					<&clkc_pll CLKID_FCLK_DIV5>,
+					<&clkc_pll CLKID_FCLK_DIV7>,
+					<&clkc_pll CLKID_HIFI_PLL>,
+					<&clkc_pll CLKID_GP0_PLL>,
+					<&clkc_pll CLKID_MPLL0>,
+					<&clkc_pll CLKID_MPLL1>,
+					<&clkc_pll CLKID_MPLL2>,
+					<&clkc_pll CLKID_MPLL3>,
+					<&clkc_pll CLKID_HDMI_PLL>,
+					<&xtal>;
+				clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3",
+						"fclk_div4", "fclk_div5", "fclk_div7",
+						"hifi_pll", "gp0_pll", "mpll0", "mpll1",
+						"mpll2", "mpll3", "hdmi_pll", "xtal";
+				#clock-cells = <1>;
+			};
+
+			clkc_pll: clock-controller@8000 {
+				compatible = "amlogic,s4-pll-clkc";
+				reg = <0x0 0x8000 0x0 0x1e8>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				#clock-cells = <1>;
+			};
+
+			watchdog@2100 {
+				compatible = "amlogic,s4-wdt", "amlogic,t7-wdt";
+				reg = <0x0 0x2100 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
 			periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,meson-s4-periphs-pinctrl";
 				#address-cells = <2>;
@@ -106,6 +148,195 @@
 					#gpio-cells = <2>;
 					gpio-ranges = <&periphs_pinctrl 0 0 82>;
 				};
+
+				remote_pins: remote-pin {
+					mux {
+						groups = "remote_in";
+						function = "remote_in";
+						bias-disable;
+					};
+				};
+
+				i2c0_pins1: i2c0-pins1 {
+					mux {
+						groups = "i2c0_sda",
+						       "i2c0_scl";
+						function = "i2c0";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins1: i2c1-pins1 {
+					mux {
+						groups = "i2c1_sda_c",
+						       "i2c1_scl_c";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins2: i2c1-pins2 {
+					mux {
+						groups = "i2c1_sda_d",
+						       "i2c1_scl_d";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins3: i2c1-pins3 {
+					mux {
+						groups = "i2c1_sda_h",
+						       "i2c1_scl_h";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c1_pins4: i2c1-pins4 {
+					mux {
+						groups = "i2c1_sda_x",
+						       "i2c1_scl_x";
+						function = "i2c1";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins1: i2c2-pins1 {
+					mux {
+						groups = "i2c2_sda_d",
+						       "i2c2_scl_d";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins2: i2c2-pins2 {
+					mux {
+						groups = "i2c2_sda_h8",
+						       "i2c2_scl_h9";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c2_pins3: i2c2-pins3 {
+					mux {
+						groups = "i2c2_sda_h0",
+						       "i2c2_scl_h1";
+						function = "i2c2";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins1: i2c3-pins1 {
+					mux {
+						groups = "i2c3_sda_x",
+						       "i2c3_scl_x";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c3_pins2: i2c3-pins2 {
+					mux {
+						groups = "i2c3_sda_z",
+						       "i2c3_scl_z";
+						function = "i2c3";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins1: i2c4-pins1 {
+					mux {
+						groups = "i2c4_sda_c",
+						       "i2c4_scl_c";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins2: i2c4-pins2 {
+					mux {
+						groups = "i2c4_sda_d",
+						       "i2c4_scl_d";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				i2c4_pins3: i2c4-pins3 {
+					mux {
+						groups = "i2c4_sda_z",
+						       "i2c4_scl_z";
+						function = "i2c4";
+						drive-strength-microamp = <3000>;
+						bias-disable;
+					};
+				};
+
+				nand_pins: nand-pins {
+					mux {
+						groups = "emmc_nand_d0",
+						       "emmc_nand_d1",
+						       "emmc_nand_d2",
+						       "emmc_nand_d3",
+						       "emmc_nand_d4",
+						       "emmc_nand_d5",
+						       "emmc_nand_d6",
+						       "emmc_nand_d7",
+						       "nand_ce0",
+						       "nand_ale",
+						       "nand_cle",
+						       "nand_wen_clk",
+						       "nand_ren_wr";
+						function = "nand";
+						input-enable;
+					};
+				};
+
+				spicc0_pins_x: spicc0-pins_x {
+					mux {
+						groups = "spi_a_mosi_x",
+						       "spi_a_miso_x",
+						       "spi_a_clk_x";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_h: spicc0-pins-h {
+					mux {
+						groups = "spi_a_mosi_h",
+						       "spi_a_miso_h",
+						       "spi_a_clk_h";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				spicc0_pins_z: spicc0-pins-z {
+					mux {
+						groups = "spi_a_mosi_z",
+						       "spi_a_miso_z",
+						       "spi_a_clk_z";
+						function = "spi_a";
+						drive-strength-microamp = <3000>;
+					};
+				};
+
 			};
 
 			gpio_intc: interrupt-controller@4080 {
@@ -118,14 +349,120 @@
 					<10 11 12 13 14 15 16 17 18 19 20 21>;
 			};
 
-			uart_B: serial@7a000 {
+			eth_phy: mdio-multiplexer@28000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x28000 0x0 0xa4>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_ETHPHY>,
+					 <&xtal>,
+					 <&clkc_pll CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+
+			spicc0: spi@50000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x50000 0x0 0x44>;
+				interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SPICC0>,
+					 <&clkc_periphs CLKID_SPICC0_EN>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@66000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x66000 0x0 0x20>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@68000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x68000 0x0 0x20>;
+				interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6a000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6a000 0x0 0x20>;
+				interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c000 0x0 0x20>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@6e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6e000 0x0 0x20>;
+				interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_I2C_M_E>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			nand: nand-controller@8c800 {
+				compatible = "amlogic,meson-axg-nfc";
+				reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>;
+				reg-names = "nfc", "emmc";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_C>,
+					<&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core", "device";
+				status = "disabled";
+			};
+
+			uart_b: serial@7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x7a000 0x0 0x18>;
 				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
-				status = "disabled";
-				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>;
 				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
 			};
 
 			reset: reset-controller@2000 {
@@ -133,6 +470,43 @@
 				reg = <0x0 0x2000 0x0 0x98>;
 				#reset-cells = <1>;
 			};
+
+			ir: ir@84040 {
+				compatible = "amlogic,meson-s4-ir";
+				reg = <0x0 0x84040 0x0 0x30>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			hwrng: rng@440788 {
+				compatible = "amlogic,meson-s4-rng";
+				reg = <0x0 0x440788 0x0 0x0c>;
+			};
+		};
+
+		ethmac: ethernet@fdc00000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xfdc00000 0x0 0x10000>,
+			      <0x0 0xfe024000 0x0 0x8>;
+
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			power-domains = <&pwrc PWRC_S4_ETH_ID>;
+			clocks = <&clkc_periphs CLKID_ETH>,
+				 <&clkc_pll CLKID_FCLK_DIV2>,
+				 <&clkc_pll CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
new file mode 100644
index 000000000..537370db3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/g12a-clkc.h>
+#include "meson-sm1.dtsi"
+#include "meson-libretech-cottonwood.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d3-cc", "amlogic,sm1";
+	model = "Libre Computer AML-S905D3-CC Solitude";
+
+	sound {
+		model = "LC-SOLITUDE";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_C IN 0", "TDM_A Capture",
+				"TDMIN_A IN 13", "TDM_A Loopback",
+				"TDMIN_B IN 13", "TDM_A Loopback",
+				"TDMIN_C IN 13", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_C IN 1", "TDM_B Capture",
+				"TDMIN_A IN 14", "TDM_B Loopback",
+				"TDMIN_B IN 14", "TDM_B Loopback",
+				"TDMIN_C IN 14", "TDM_B Loopback",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_A IN 15", "TDM_C Loopback",
+				"TDMIN_B IN 15", "TDM_C Loopback",
+				"TDMIN_C IN 15", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 095579c55..109932068 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -32,7 +32,6 @@
 		compatible = "dmic-codec";
 		num-channels = <2>;
 		wakeup-delay-ms = <50>;
-		status = "okay";
 		sound-name-prefix = "MIC";
 	};
 
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 377660d70..65ebac308 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -728,7 +728,7 @@
 			};
 		};
 
-		sbgpio: gpio@17001000{
+		sbgpio: gpio@17001000 {
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index efa79209f..988928c60 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -946,7 +946,7 @@
 			dr_mode = "host";
 		};
 
-		sbgpio: gpio@17001000{
+		sbgpio: gpio@17001000 {
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 8b4d280b1..b897f5542 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -747,7 +747,7 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
@@ -760,7 +760,7 @@
 			};
 		};
 
-		soc {
+		soc-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
@@ -773,28 +773,28 @@
 			};
 		};
 
-		big_cluster_thermal_zone: big-cluster {
+		big_cluster_thermal_zone: big-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 21>;
 			status = "disabled";
 		};
 
-		little_cluster_thermal_zone: little-cluster {
+		little_cluster_thermal_zone: little-cluster-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 22>;
 			status = "disabled";
 		};
 
-		gpu0_thermal_zone: gpu0 {
+		gpu0_thermal_zone: gpu0-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 23>;
 			status = "disabled";
 		};
 
-		gpu1_thermal_zone: gpu1 {
+		gpu1_thermal_zone: gpu1-thermal {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 24>;
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index ec85cd2c7..31929e237 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -76,27 +76,27 @@
 	};
 
 	thermal-zones {
-		pmic {
+		pmic-thermal {
 			thermal-sensors = <&scmi_sensors0 0>;
 		};
 
-		soc {
+		soc-thermal {
 			thermal-sensors = <&scmi_sensors0 3>;
 		};
 
-		big-cluster {
+		big-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 21>;
 		};
 
-		little-cluster {
+		little-cluster-thermal {
 			thermal-sensors = <&scmi_sensors0 22>;
 		};
 
-		gpu0 {
+		gpu0-thermal {
 			thermal-sensors = <&scmi_sensors0 23>;
 		};
 
-		gpu1 {
+		gpu1-thermal {
 			thermal-sensors = <&scmi_sensors0 24>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b7605..22a200fb0 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -184,7 +184,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@5801A000 {
+		uart1: serial@5801a000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@5801C000 {
+		uart2: serial@5801c000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@5801E000 {
+		uart3: serial@5801e000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
 			clocks = <&clk BM1880_CLK_UART_500M>,
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
index 2f124b027..aadfa0ae0 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -227,9 +227,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index fbf0392b8..dec5a110f 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -113,7 +113,6 @@
 		spi-max-frequency = <5000000>;
 		spi-cpha;
 		spi-cpol;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
@@ -137,7 +136,6 @@
 		at25,page-size = <64>;
 		spi-cpha;
 		spi-cpol;
-		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
 		pl022,com-mode = <0>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 9dcd25ec2..896d1f33b 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -586,6 +586,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f049687d6..d8516ec0d 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -450,6 +450,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinmux 0 0 16>,
 					<&pinmux 16 71 2>,
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba6926..d7f2191c2 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,8 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += google
+
 dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos5433-tm2.dtb		\
 	exynos5433-tm2e.dtb		\
 	exynos7-espresso.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d163891cd..8f02de848 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -124,19 +124,18 @@
 		audio-amplifier = <&max98504>;
 		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 		model = "wm5110";
-		samsung,audio-routing =
-			/* Headphone */
-			"HP", "HPOUT1L",
-			"HP", "HPOUT1R",
-
-			/* Speaker */
-			"SPK", "SPKOUT",
-			"SPKOUT", "HPOUT2L",
-			"SPKOUT", "HPOUT2R",
-
-			/* Receiver */
-			"RCV", "HPOUT3L",
-			"RCV", "HPOUT3R";
+		audio-routing = /* Headphone */
+				"HP", "HPOUT1L",
+				"HP", "HPOUT1R",
+
+				/* Speaker */
+				"SPK", "SPKOUT",
+				"SPKOUT", "HPOUT2L",
+				"SPKOUT", "HPOUT2R",
+
+				/* Receiver */
+				"RCV", "HPOUT3L",
+				"RCV", "HPOUT3R";
 	};
 };
 
@@ -1103,7 +1102,7 @@
 
 	te_irq: te-irq-pins {
 		samsung,pins = "gpf1-3";
-		samsung,pin-function = <0xf>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 91ae0462a..7fbbec04b 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -361,7 +361,8 @@
 		ranges = <0x0 0x0 0x0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos5433-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -850,7 +851,8 @@
 			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos5433-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1546,7 +1548,7 @@
 		};
 
 		adc: adc@14d10000 {
-			compatible = "samsung,exynos7-adc";
+			compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc";
 			reg = <0x14d10000 0x100>;
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc";
@@ -1556,7 +1558,7 @@
 		};
 
 		i2s1: i2s@14d60000 {
-			compatible = "samsung,exynos7-i2s";
+			compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s";
 			reg = <0x14d60000 0x100>;
 			dmas = <&pdma0 31>, <&pdma0 30>;
 			dma-names = "tx", "rx";
@@ -1571,7 +1573,7 @@
 		};
 
 		pwm: pwm@14dd0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm";
 			reg = <0x14dd0000 0x100>;
 			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
@@ -1586,7 +1588,8 @@
 		};
 
 		hsi2c_0: i2c@14e40000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e40000 0x1000>;
 			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1599,7 +1602,8 @@
 		};
 
 		hsi2c_1: i2c@14e50000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e50000 0x1000>;
 			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1612,7 +1616,8 @@
 		};
 
 		hsi2c_2: i2c@14e60000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e60000 0x1000>;
 			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1625,7 +1630,8 @@
 		};
 
 		hsi2c_3: i2c@14e70000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14e70000 0x1000>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1638,7 +1644,8 @@
 		};
 
 		hsi2c_4: i2c@14ec0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ec0000 0x1000>;
 			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1651,7 +1658,8 @@
 		};
 
 		hsi2c_5: i2c@14ed0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ed0000 0x1000>;
 			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1664,7 +1672,8 @@
 		};
 
 		hsi2c_6: i2c@14ee0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ee0000 0x1000>;
 			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1677,7 +1686,8 @@
 		};
 
 		hsi2c_7: i2c@14ef0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14ef0000 0x1000>;
 			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1690,7 +1700,8 @@
 		};
 
 		hsi2c_8: i2c@14d90000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14d90000 0x1000>;
 			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1703,7 +1714,8 @@
 		};
 
 		hsi2c_9: i2c@14da0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14da0000 0x1000>;
 			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1716,7 +1728,8 @@
 		};
 
 		hsi2c_10: i2c@14de0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14de0000 0x1000>;
 			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1729,7 +1742,8 @@
 		};
 
 		hsi2c_11: i2c@14df0000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "samsung,exynos5433-hsi2c",
+				     "samsung,exynos7-hsi2c";
 			reg = <0x14df0000 0x1000>;
 			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1820,7 +1834,8 @@
 		};
 
 		mshc_0: mmc@15540000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1833,7 +1848,8 @@
 		};
 
 		mshc_1: mmc@15550000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1846,7 +1862,8 @@
 		};
 
 		mshc_2: mmc@15560000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos5433-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1897,7 +1914,8 @@
 			};
 
 			i2s0: i2s@11440000 {
-				compatible = "samsung,exynos7-i2s";
+				compatible = "samsung,exynos5433-i2s",
+					     "samsung,exynos7-i2s";
 				reg = <0x11440000 0x100>;
 				dmas = <&adma 0>, <&adma 2>;
 				dma-names = "tx", "rx";
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 54ed5167d..9cb6bd612 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -25,7 +25,6 @@
 		pinctrl6 = &pinctrl_fsys0;
 		pinctrl7 = &pinctrl_fsys1;
 		pinctrl8 = &pinctrl_bus1;
-		tmuctrl0 = &tmuctrl_0;
 	};
 
 	arm-pmu {
@@ -129,7 +128,8 @@
 		ranges = <0 0 0 0x18000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
+			compatible = "samsung,exynos7-chipid",
+				     "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
@@ -280,7 +280,7 @@
 		};
 
 		serial_0: serial@13630000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x13630000 0x100>;
 			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric0 PCLK_UART0>,
@@ -290,7 +290,7 @@
 		};
 
 		serial_1: serial@14c20000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c20000 0x100>;
 			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART1>,
@@ -300,7 +300,7 @@
 		};
 
 		serial_2: serial@14c30000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c30000 0x100>;
 			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART2>,
@@ -310,7 +310,7 @@
 		};
 
 		serial_3: serial@14c40000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart";
 			reg = <0x14c40000 0x100>;
 			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peric1 PCLK_UART3>,
@@ -540,7 +540,7 @@
 		};
 
 		rtc: rtc@10590000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
 			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -560,7 +560,8 @@
 		};
 
 		gpu: gpu@14ac0000 {
-			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			compatible = "samsung,exynos7-mali",
+				     "samsung,exynos5433-mali", "arm,mali-t760";
 			reg = <0x14ac0000 0x5000>;
 			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
@@ -620,7 +621,7 @@
 		};
 
 		pwm: pwm@136c0000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
 			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index d69fc2392..008228fb3 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynos7885-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -264,7 +265,8 @@
 			reg = <0x11cb0000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynos7885-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -289,12 +291,14 @@
 		};
 
 		pmu_system_controller: system-controller@11c80000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynos7885-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x11c80000 0x10000>;
 		};
 
 		mmc_0: mmc@13500000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos7885-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x13500000 0x2000>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -307,7 +311,8 @@
 		};
 
 		serial_0: serial@13800000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13800000 0x100>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -320,7 +325,8 @@
 		};
 
 		serial_1: serial@13810000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13810000 0x100>;
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -333,7 +339,8 @@
 		};
 
 		serial_2: serial@13820000 {
-			compatible = "samsung,exynos5433-uart";
+			compatible = "samsung,exynos7885-uart",
+				     "samsung,exynos5433-uart";
 			reg = <0x13820000 0x100>;
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
@@ -346,7 +353,8 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -359,7 +367,8 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -372,7 +381,8 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -385,7 +395,8 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -398,7 +409,8 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -411,7 +423,8 @@
 		};
 
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -424,7 +437,8 @@
 		};
 
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -437,7 +451,8 @@
 		};
 
 		i2c_7: i2c@11cd0000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos7885-i2c",
+				     "samsung,s3c2440-i2c";
 			reg = <0x11cd0000 0x100>;
 			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index 6ed389125..f074df898 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -29,6 +29,22 @@
 		stdout-path = &serial_0;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		label = "micro-USB";
+		type = "micro";
+		vbus-supply = <&reg_usb_host_vbus>;
+		id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&micro_usb_det_pins>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
 	/*
 	 * RAM: 4 GiB (eMCP):
 	 *   - 2 GiB at 0x80000000
@@ -111,6 +127,35 @@
 		};
 	};
 
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
+	reg_usb_host_vbus: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpa3 5 GPIO_ACTIVE_LOW>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@f0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xf0000000 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x100000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+
 	/*
 	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
 	 *
@@ -172,6 +217,12 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+
+	micro_usb_det_pins: micro-usb-det-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
@@ -186,6 +237,28 @@
 	pinctrl-0 = <&uart1_pins>;
 };
 
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "host";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
+
 &usi_uart {
 	samsung,clkreq-on; /* needed for UART mode */
 	status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index aa077008b..da3f4a791 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -359,7 +359,8 @@
 			reg = <0x11850000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -368,7 +369,8 @@
 			reg = <0x11c30000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos850-wakeup-eint";
+				compatible = "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -396,7 +398,7 @@
 		};
 
 		rtc: rtc@11a30000 {
-			compatible = "samsung,s3c6410-rtc";
+			compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc";
 			reg = <0x11a30000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -406,7 +408,8 @@
 		};
 
 		mmc_0: mmc@12100000 {
-			compatible = "samsung,exynos7-dw-mshc-smu";
+			compatible = "samsung,exynos850-dw-mshc-smu",
+				     "samsung,exynos7-dw-mshc-smu";
 			reg = <0x12100000 0x2000>;
 			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -419,7 +422,7 @@
 		};
 
 		i2c_0: i2c@13830000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13830000 0x100>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -432,7 +435,7 @@
 		};
 
 		i2c_1: i2c@13840000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13840000 0x100>;
 			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -445,7 +448,7 @@
 		};
 
 		i2c_2: i2c@13850000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13850000 0x100>;
 			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -458,7 +461,7 @@
 		};
 
 		i2c_3: i2c@13860000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
 			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -471,7 +474,7 @@
 		};
 
 		i2c_4: i2c@13870000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
 			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -485,7 +488,7 @@
 
 		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
 		i2c_5: i2c@13880000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
 			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -499,7 +502,7 @@
 
 		/* I2C_6 (also called MOTOR_I2C in TRM) */
 		i2c_6: i2c@13890000 {
-			compatible = "samsung,s3c2440-i2c";
+			compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -570,6 +573,36 @@
 			clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
 		};
 
+		usbdrd: usb@13600000 {
+			compatible = "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x13600000 0x10000>;
+			clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>,
+				 <&cmu_hsi CLK_GOUT_USB_REF_CLK>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		usbdrd_phy: phy@135d0000 {
+			compatible = "samsung,exynos850-usbdrd-phy";
+			reg = <0x135d0000 0x100>;
+			clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>,
+				 <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		usi_uart: usi@138200c0 {
 			compatible = "samsung,exynos850-usi";
 			reg = <0x138200c0 0x20>;
@@ -610,7 +643,8 @@
 			status = "disabled";
 
 			hsi2c_0: i2c@138a0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138a0000 0xc0>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -638,7 +672,8 @@
 			status = "disabled";
 
 			hsi2c_1: i2c@138b0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138b0000 0xc0>;
 				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -666,7 +701,8 @@
 			status = "disabled";
 
 			hsi2c_2: i2c@138c0000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x138c0000 0xc0>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -708,7 +744,8 @@
 			status = "disabled";
 
 			hsi2c_3: i2c@11d00000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d00000 0xc0>;
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
@@ -748,7 +785,8 @@
 			status = "disabled";
 
 			hsi2c_4: i2c@11d20000 {
-				compatible = "samsung,exynosautov9-hsi2c";
+				compatible = "samsung,exynos850-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
 				reg = <0x11d20000 0xc0>;
 				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index bc1815f6a..de2c1de51 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "exynosautov9.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Samsung ExynosAuto v9 SADK board";
@@ -32,6 +33,31 @@
 		      <0xa 0x00000000 0x2 0x00000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_volup &key_voldown>;
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpg2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpg1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	ufs_0_fixed_vcc_reg: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "ufs-vcc";
@@ -49,6 +75,31 @@
 	};
 };
 
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpg1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_tout3>;
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index b228cd7e3..c871a2f49 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -166,7 +166,8 @@
 		ranges = <0x0 0x0 0x0 0x20000000>;
 
 		chipid@10000000 {
-			compatible = "samsung,exynos850-chipid";
+			compatible = "samsung,exynosautov9-chipid",
+				     "samsung,exynos850-chipid";
 			reg = <0x10000000 0x24>;
 		};
 
@@ -309,7 +310,9 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynosautov9-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
 			};
 		};
 
@@ -349,7 +352,8 @@
 		};
 
 		pmu_system_controller: system-controller@10460000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "samsung,exynosautov9-pmu",
+				     "samsung,exynos7-pmu", "syscon";
 			reg = <0x10460000 0x10000>;
 
 			reboot: syscon-reboot {
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000..663e8265c
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000..a397f068e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000..c1c8566d7
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	/*
+	 * FIXME: Keep the stub clock for serial driver, until proper clock
+	 * driver is implemented.
+	 */
+	clock_usi: clock-usi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "usi";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&clock_usi>, <&clock_usi>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&clock_usi>, <&clock_usi>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint";
+			};
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
new file mode 100644
index 000000000..0a6d5e1fe
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	gs101-oriole.dtb \
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
new file mode 100644
index 000000000..4a71f7522
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Oriole Device Tree
+ *
+ * Copyright 2021-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "gs101-pinctrl.h"
+#include "gs101.dtsi"
+
+/ {
+	model = "Oriole";
+	compatible = "google,gs101-oriole", "google,gs101";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		/* Bootloader expects bootargs specified otherwise it crashes */
+		bootargs = "";
+		stdout-path = &serial_0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+
+		button-vol-down {
+			label = "KEY_VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "KEY_VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-power {
+			label = "KEY_POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&ext_24_5m {
+	clock-frequency = <24576000>;
+};
+
+&ext_200m {
+	clock-frequency = <200000000>;
+};
+
+&pinctrl_far_alive {
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa7-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_gpio_alive {
+	key_power: key-power-pins {
+		samsung,pins = "gpa10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&serial_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_bus>;
+	status = "okay";
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	timeout-sec = <30>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
new file mode 100644
index 000000000..e6a9776d4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
@@ -0,0 +1,1249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include "gs101-pinctrl.h"
+
+&pinctrl_gpio_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa5: gpa5-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa9: gpa9-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa10: gpa10-gpio-bank  {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpa2-3", "gpa2-4";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpa4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_far_alive {
+	gpa6: gpa6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa7: gpa7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa8: gpa8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	gpa11: gpa11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+};
+
+&pinctrl_gsacore {
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps2: gps2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_gsactrl {
+	gps3: gps3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie0_clkreq: pcie0-clkreq-pins{
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie0_perst: pcie0-perst-pins {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gph4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gph4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gph4-3", "gph4-4", "gph4-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gph4-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	pcie1_clkreq: pcie1-clkreq-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_UP>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
+	};
+
+	pcie1_perst: pcie1-perst-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp13: gpp13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp14: gpp14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp15: gpp15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp16: gpp16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp17: gpp17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp18: gpp18-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp19: gpp19-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* USI_PERIC0_UART_DBG */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	disp_te_pri_on: disp-te-pri-on-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_pri_off: disp-te-pri-off-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	disp_te_sec_on: disp-te-sec-on-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_EINT>;
+	};
+
+	disp_te_sec_off: disp-te-sec-off-pins {
+		samsung,pins = "gpp0-4";
+		samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
+	};
+
+	sensor_mclk1_out: sensor-mclk1-out-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk1_fn: sensor-mclk1-fn-pins {
+		samsung,pins = "gpp3-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_out: sensor-mclk2-out-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk2_fn: sensor-mclk2-fn-pins {
+		samsung,pins = "gpp5-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_out: sensor-mclk3-out-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk3_fn: sensor-mclk3-fn-pins {
+		samsung,pins = "gpp7-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_out: sensor-mclk4-out-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk4_fn: sensor-mclk4-fn-pins {
+		samsung,pins = "gpp9-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_out: sensor-mclk5-out-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk5_fn: sensor-mclk5-fn-pins {
+		samsung,pins = "gpp11-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_out: sensor-mclk6-out-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk6_fn: sensor-mclk6-fn-pins {
+		samsung,pins = "gpp13-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_out: sensor-mclk7-out-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk7_fn: sensor-mclk7-fn-pins {
+		samsung,pins = "gpp15-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_out: sensor-mclk8-out-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	sensor_mclk8_fn: sensor-mclk8-fn-pins {
+		samsung,pins = "gpp17-0";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
+	};
+
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart14_bus_single: uart14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1",
+			       "gpp18-2", "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp18-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
+	};
+
+	uart8_bus_single: uart8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
+			       "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp16-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart7_bus_single: uart7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1",
+			       "gpp14-2", "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp14-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart6_bus_single: uart6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1",
+			       "gpp12-2", "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart5_bus_single: uart5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1",
+			       "gpp10-2", "gpp10-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
+	};
+
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart4_bus_single: uart4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1",
+			       "gpp8-2", "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart3_bus_single: uart3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1",
+			       "gpp6-2", "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart2_bus_single: uart2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1",
+			       "gpp4-2", "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart1_bus_single: uart1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1",
+			       "gpp2-2", "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp20: gpp20-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp21: gpp21-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp22: gpp22-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp23: gpp23-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp24: gpp24-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp25: gpp25-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp26: gpp26-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp27: gpp27-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hsi2c13_bus: hsi2c13-bus-pins  {
+		samsung,pins = "gpp25-0", "gpp25-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart13_bus_single: uart13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1",
+			       "gpp25-2", "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp25-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart12_bus_single: uart12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5",
+			       "gpp23-6", "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi14_cs2: spi14-cs2-pins {
+		samsung,pins = "gpp23-6";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp23-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart11_bus_single: uart11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1",
+			       "gpp23-2", "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp23-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart10_bus_single: uart10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1",
+			       "gpp21-2", "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp21-3";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart9_bus_single: uart9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5",
+			       "gpp20-6", "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp20-7";
+		samsung,pin-function = <GS101_PIN_FUNC_2>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	uart0_bus_single: uart0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1",
+			       "gpp20-2", "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp20-3";
+		samsung,pin-function = <GS101_PIN_FUNC_3>;
+		samsung,pin-pud = <GS101_PIN_PULL_NONE>;
+		samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
new file mode 100644
index 000000000..b7d276b1e
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl binding constants for GS101
+ *
+ * Copyright 2020-2023 Google LLC
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__
+
+#define GS101_PIN_PULL_NONE		0
+#define GS101_PIN_PULL_DOWN		1
+#define GS101_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define GS101_PIN_PDN_OUT0		0
+#define GS101_PIN_PDN_OUT1		1
+#define GS101_PIN_PDN_INPUT		2
+#define GS101_PIN_PDN_PREV		3
+
+/* GS101 drive strengths */
+#define GS101_PIN_DRV_2_5_MA		0
+#define GS101_PIN_DRV_5_MA		1
+#define GS101_PIN_DRV_7_5_MA		2
+#define GS101_PIN_DRV_10_MA		3
+
+#define GS101_PIN_FUNC_INPUT		0
+#define GS101_PIN_FUNC_OUTPUT		1
+#define GS101_PIN_FUNC_2		2
+#define GS101_PIN_FUNC_3		3
+#define GS101_PIN_FUNC_EINT		0xf
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
new file mode 100644
index 000000000..d838e3a7a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GS101 SoC
+ *
+ * Copyright 2019-2023 Google LLC
+ * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org>
+ */
+
+#include <dt-bindings/clock/google,gs101.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "google,gs101";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_gpio_alive;
+		pinctrl1 = &pinctrl_far_alive;
+		pinctrl2 = &pinctrl_gsacore;
+		pinctrl3 = &pinctrl_gsactrl;
+		pinctrl4 = &pinctrl_peric0;
+		pinctrl5 = &pinctrl_peric1;
+		pinctrl6 = &pinctrl_hsi1;
+		pinctrl7 = &pinctrl_hsi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0000>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0100>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0200>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0300>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ANANKE_CPU_SLEEP>;
+			capacity-dmips-mhz = <250>;
+			dynamic-power-coefficient = <70>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0400>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0500>;
+			enable-method = "psci";
+			cpu-idle-states =  <&ENYO_CPU_SLEEP>;
+			capacity-dmips-mhz = <620>;
+			dynamic-power-coefficient = <284>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0600>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0700>;
+			enable-method = "psci";
+			cpu-idle-states =  <&HERA_CPU_SLEEP>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <650>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			ANANKE_CPU_SLEEP: cpu-ananke-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <70>;
+				exit-latency-us = <160>;
+				min-residency-us = <2000>;
+			};
+
+			ENYO_CPU_SLEEP: cpu-enyo-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <150>;
+				exit-latency-us = <190>;
+				min-residency-us = <2500>;
+			};
+
+			HERA_CPU_SLEEP: cpu-hera-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <235>;
+				exit-latency-us = <220>;
+				min-residency-us = <3500>;
+			};
+		};
+	};
+
+	/* TODO replace with CCF clock */
+	dummy_clk: clock-3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12345>;
+		clock-output-names = "pclk";
+	};
+
+	/* ect node is required to be present by bootloader */
+	ect {
+	};
+
+	ext_24_5m: clock-1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	ext_200m: clock-2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "ext-200m";
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	pmu-2 {
+		compatible = "arm,cortex-x1-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
+	};
+
+	pmu-3 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gsa_reserved_protected: gsa@90200000 {
+			reg = <0x0 0x90200000 0x400000>;
+			no-map;
+		};
+
+		tpu_fw_reserved: tpu-fw@93000000 {
+			reg = <0x0 0x93000000 0x1000000>;
+			no-map;
+		};
+
+		aoc_reserve: aoc@94000000 {
+			reg = <0x0 0x94000000 0x03000000>;
+			no-map;
+		};
+
+		abl_reserved: abl@f8800000 {
+			reg = <0x0 0xf8800000 0x02000000>;
+			no-map;
+		};
+
+		dss_log_reserved: dss-log-reserved@fd3f0000 {
+			reg = <0x0 0xfd3f0000 0x0000e000>;
+			no-map;
+		};
+
+		debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
+			reg = <0x0 0xfd3fe000 0x00001000>;
+			no-map;
+		};
+
+		bldr_log_reserved: bldr-log-reserved@fd800000 {
+			reg = <0x0 0xfd800000 0x00100000>;
+			no-map;
+		};
+
+		bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
+			reg = <0x0 0xfd900000 0x00002000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		cmu_misc: clock-controller@10010000 {
+			compatible = "google,gs101-cmu-misc";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+			clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_MISC_SSS>;
+			clock-names = "bus", "sss";
+		};
+
+		watchdog_cl0: watchdog@10060000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10070000 {
+			compatible = "google,gs101-wdt";
+			reg = <0x10070000 0x100>;
+			interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>,
+				 <&ext_24_5m>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>, /* GICD */
+			      <0x10440000 0x100000>;/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysreg_peric0: syscon@10820000 {
+			compatible = "google,gs101-peric0-sysreg", "syscon";
+			reg = <0x10820000 0x10000>;
+		};
+
+		pinctrl_peric0: pinctrl@10840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10840000 0x00001000>;
+			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		usi_uart: usi@10a000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&dummy_clk>, <&dummy_clk>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			status = "disabled";
+
+			serial_0: serial@10a00000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a00000 0xc0>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 634
+					      IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&dummy_clk 0>, <&dummy_clk 0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		sysreg_peric1: syscon@10c20000 {
+			compatible = "google,gs101-peric1-sysreg", "syscon";
+			reg = <0x10c20000 0x10000>;
+		};
+
+		pinctrl_peric1: pinctrl@10c40000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x10c40000 0x00001000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi1: pinctrl@11840000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x11840000 0x00001000>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		pinctrl_hsi2: pinctrl@14440000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x14440000 0x00001000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		cmu_apm: clock-controller@17400000 {
+			compatible = "google,gs101-cmu-apm";
+			reg = <0x17400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+
+		sysreg_apm: syscon@174204e0 {
+			compatible = "google,gs101-apm-sysreg", "syscon";
+			reg = <0x174204e0 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@17460000 {
+			compatible = "google,gs101-pmu", "syscon";
+			reg = <0x17460000 0x10000>;
+		};
+
+		pinctrl_gpio_alive: pinctrl@174d0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174d0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_far_alive: pinctrl@174e0000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x174e0000 0x00001000>;
+
+			wakeup-interrupt-controller {
+				compatible = "google,gs101-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_gsactrl: pinctrl@17940000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17940000 0x00001000>;
+		};
+
+		pinctrl_gsacore: pinctrl@17a80000 {
+			compatible = "google,gs101-pinctrl";
+			reg = <0x17a80000 0x00001000>;
+		};
+
+		cmu_top: clock-controller@1e080000 {
+			compatible = "google,gs101-cmu-top";
+			reg = <0x1e080000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>;
+			clock-names = "oscclk";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts =
+		   <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+		   <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
+	};
+};
+
+#include "gs101-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 89aee6c92..2cb0212b6 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -15,24 +15,46 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls1088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+DTC_FLAGS_fsl-ls1088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+DTC_FLAGS_fsl-ls1088a-ten64 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+DTC_FLAGS_fsl-ls1088a-tqmls1088a-mbls10xxa := -Wno-interrupt_map
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-tqmls1088a-mbls10xxa.dtb
+DTC_FLAGS_fsl-ls2080a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+DTC_FLAGS_fsl-ls2080a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+DTC_FLAGS_fsl-ls2081a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+DTC_FLAGS_fsl-ls2080a-simu := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+DTC_FLAGS_fsl-ls2088a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+DTC_FLAGS_fsl-ls2088a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3 := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+DTC_FLAGS_fsl-lx2160a-bluebox3-rev-a := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+DTC_FLAGS_fsl-lx2160a-clearfog-cx := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+DTC_FLAGS_fsl-lx2160a-honeycomb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+DTC_FLAGS_fsl-lx2160a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+DTC_FLAGS_fsl-lx2160a-rdb := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+DTC_FLAGS_fsl-lx2162a-clearfog := -Wno-interrupt_map
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-clearfog.dtb
+DTC_FLAGS_fsl-lx2162a-qds := -Wno-interrupt_map
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
 fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
@@ -49,6 +71,33 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 
+DTC_FLAGS_fsl-lx2160a-tqmlx2160a-mblx2160a := -Wno-interrupt_map
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo
+fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \
+	fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
@@ -66,6 +115,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phygate-tauri-l.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
@@ -79,19 +129,31 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+
+imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+
+imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33-dtbs += imx8mn-tqma8mqnl-mba8mx.dtb imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
@@ -102,6 +164,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -110,13 +175,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 
 imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
@@ -133,6 +202,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+
+imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33-dtbs += imx8mq-tqma8mq-mba8mx.dtb imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
@@ -147,6 +220,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
@@ -159,6 +233,7 @@ imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice
 imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
 imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
 imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-imx219-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-imx219.dtbo
 imx8mp-venice-gw74xx-rpidsi-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
@@ -171,6 +246,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-imx219.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index a86302252..1e3fe3897 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -307,46 +307,46 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
-			fsl,tmu-calibration = <0x00000000 0x00000025
-					       0x00000001 0x0000002c
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x0000005f
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006c
-
-					       0x00010000 0x00000026
-					       0x00010001 0x0000002d
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004d
-					       0x00010006 0x00000055
-					       0x00010007 0x0000005d
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006d
-
-					       0x00020000 0x00000026
-					       0x00020001 0x00000030
-					       0x00020002 0x0000003a
-					       0x00020003 0x00000044
-					       0x00020004 0x0000004e
-					       0x00020005 0x00000059
-					       0x00020006 0x00000063
-
-					       0x00030000 0x00000014
-					       0x00030001 0x00000021
-					       0x00030002 0x0000002e
-					       0x00030003 0x0000003a
-					       0x00030004 0x00000047
-					       0x00030005 0x00000053
-					       0x00030006 0x00000060>;
-			big-endian;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000025>,
+					<0x00000001 0x0000002c>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x0000005f>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006c>,
+
+					<0x00010000 0x00000026>,
+					<0x00010001 0x0000002d>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004d>,
+					<0x00010006 0x00000055>,
+					<0x00010007 0x0000005d>,
+					<0x00010008 0x00000065>,
+					<0x00010009 0x0000006d>,
+
+					<0x00020000 0x00000026>,
+					<0x00020001 0x00000030>,
+					<0x00020002 0x0000003a>,
+					<0x00020003 0x00000044>,
+					<0x00020004 0x0000004e>,
+					<0x00020005 0x00000059>,
+					<0x00020006 0x00000063>,
+
+					<0x00030000 0x00000014>,
+					<0x00030001 0x00000021>,
+					<0x00030002 0x0000002e>,
+					<0x00030003 0x0000003a>,
+					<0x00030004 0x00000047>,
+					<0x00030005 0x00000053>,
+					<0x00030006 0x00000060>;
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index eefe3577d..ae534c23b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1026,49 +1026,50 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
-			fsl,tmu-calibration = <0x00000000 0x00000024
-					       0x00000001 0x0000002b
-					       0x00000002 0x00000031
-					       0x00000003 0x00000038
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000045
-					       0x00000006 0x0000004c
-					       0x00000007 0x00000053
-					       0x00000008 0x00000059
-					       0x00000009 0x00000060
-					       0x0000000a 0x00000066
-					       0x0000000b 0x0000006d
-
-					       0x00010000 0x0000001c
-					       0x00010001 0x00000024
-					       0x00010002 0x0000002c
-					       0x00010003 0x00000035
-					       0x00010004 0x0000003d
-					       0x00010005 0x00000045
-					       0x00010006 0x0000004d
-					       0x00010007 0x00000055
-					       0x00010008 0x0000005e
-					       0x00010009 0x00000066
-					       0x0001000a 0x0000006e
-
-					       0x00020000 0x00000018
-					       0x00020001 0x00000022
-					       0x00020002 0x0000002d
-					       0x00020003 0x00000038
-					       0x00020004 0x00000043
-					       0x00020005 0x0000004d
-					       0x00020006 0x00000058
-					       0x00020007 0x00000063
-					       0x00020008 0x0000006e
-
-					       0x00030000 0x00000010
-					       0x00030001 0x0000001c
-					       0x00030002 0x00000029
-					       0x00030003 0x00000036
-					       0x00030004 0x00000042
-					       0x00030005 0x0000004f
-					       0x00030006 0x0000005b
-					       0x00030007 0x00000068>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000024>,
+					<0x00000001 0x0000002b>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000038>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000045>,
+					<0x00000006 0x0000004c>,
+					<0x00000007 0x00000053>,
+					<0x00000008 0x00000059>,
+					<0x00000009 0x00000060>,
+					<0x0000000a 0x00000066>,
+					<0x0000000b 0x0000006d>,
+
+					<0x00010000 0x0000001c>,
+					<0x00010001 0x00000024>,
+					<0x00010002 0x0000002c>,
+					<0x00010003 0x00000035>,
+					<0x00010004 0x0000003d>,
+					<0x00010005 0x00000045>,
+					<0x00010006 0x0000004d>,
+					<0x00010007 0x00000055>,
+					<0x00010008 0x0000005e>,
+					<0x00010009 0x00000066>,
+					<0x0001000a 0x0000006e>,
+
+					<0x00020000 0x00000018>,
+					<0x00020001 0x00000022>,
+					<0x00020002 0x0000002d>,
+					<0x00020003 0x00000038>,
+					<0x00020004 0x00000043>,
+					<0x00020005 0x0000004d>,
+					<0x00020006 0x00000058>,
+					<0x00020007 0x00000063>,
+					<0x00020008 0x0000006e>,
+
+					<0x00030000 0x00000010>,
+					<0x00030001 0x0000001c>,
+					<0x00030002 0x00000029>,
+					<0x00030003 0x00000036>,
+					<0x00030004 0x00000042>,
+					<0x00030005 0x0000004f>,
+					<0x00030006 0x0000005b>,
+					<0x00030007 0x00000068>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
new file mode 100644
index 000000000..03748a7f6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1043a-tqmls1043a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
+	compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
+		     "fsl,ls1043a";
+
+	aliases {
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
new file mode 100644
index 000000000..12d5f3938
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1043A based SoM of TQ
+ */
+
+#include "fsl-ls1043a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index f8acbefc8..d333b773b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -447,46 +447,47 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <0 33 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
-			fsl,tmu-calibration = <0x00000000 0x00000023
-					       0x00000001 0x0000002a
-					       0x00000002 0x00000031
-					       0x00000003 0x00000037
-					       0x00000004 0x0000003e
-					       0x00000005 0x00000044
-					       0x00000006 0x0000004b
-					       0x00000007 0x00000051
-					       0x00000008 0x00000058
-					       0x00000009 0x0000005e
-					       0x0000000a 0x00000065
-					       0x0000000b 0x0000006b
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003b
-					       0x00010004 0x00000043
-					       0x00010005 0x0000004b
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000064
-					       0x00010009 0x0000006c
-
-					       0x00020000 0x00000021
-					       0x00020001 0x0000002c
-					       0x00020002 0x00000036
-					       0x00020003 0x00000040
-					       0x00020004 0x0000004b
-					       0x00020005 0x00000055
-					       0x00020006 0x0000005f
-
-					       0x00030000 0x00000013
-					       0x00030001 0x0000001d
-					       0x00030002 0x00000028
-					       0x00030003 0x00000032
-					       0x00030004 0x0000003d
-					       0x00030005 0x00000047
-					       0x00030006 0x00000052
-					       0x00030007 0x0000005c>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000023>,
+					<0x00000001 0x0000002a>,
+					<0x00000002 0x00000031>,
+					<0x00000003 0x00000037>,
+					<0x00000004 0x0000003e>,
+					<0x00000005 0x00000044>,
+					<0x00000006 0x0000004b>,
+					<0x00000007 0x00000051>,
+					<0x00000008 0x00000058>,
+					<0x00000009 0x0000005e>,
+					<0x0000000a 0x00000065>,
+					<0x0000000b 0x0000006b>,
+
+					<0x00010000 0x00000023>,
+					<0x00010001 0x0000002b>,
+					<0x00010002 0x00000033>,
+					<0x00010003 0x0000003b>,
+					<0x00010004 0x00000043>,
+					<0x00010005 0x0000004b>,
+					<0x00010006 0x00000054>,
+					<0x00010007 0x0000005c>,
+					<0x00010008 0x00000064>,
+					<0x00010009 0x0000006c>,
+
+					<0x00020000 0x00000021>,
+					<0x00020001 0x0000002c>,
+					<0x00020002 0x00000036>,
+					<0x00020003 0x00000040>,
+					<0x00020004 0x0000004b>,
+					<0x00020005 0x00000055>,
+					<0x00020006 0x0000005f>,
+
+					<0x00030000 0x00000013>,
+					<0x00030001 0x0000001d>,
+					<0x00030002 0x00000028>,
+					<0x00030003 0x00000032>,
+					<0x00030004 0x0000003d>,
+					<0x00030005 0x00000047>,
+					<0x00030006 0x00000052>,
+					<0x00030007 0x0000005c>;
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -526,20 +527,6 @@
 			status = "disabled";
 		};
 
-		dspi1: spi@2110000 {
-			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x0 0x2110000 0x0 0x10000>;
-			interrupts = <0 65 0x4>;
-			clock-names = "dspi";
-			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
-					    QORIQ_CLK_PLL_DIV(1)>;
-			spi-num-chipselects = <5>;
-			big-endian;
-			status = "disabled";
-		};
-
 		i2c0: i2c@2180000 {
 			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
new file mode 100644
index 000000000..37834ae3d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1046a-tqmls1046a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
+	compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
+		     "fsl,ls1046a";
+
+	aliases {
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&dspi {
+	status = "okay";
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+#include "fsl-ls1046-post.dtsi"
+#include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet7 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
new file mode 100644
index 000000000..4a8f8bc68
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1046A based SoM of TQ
+ */
+
+#include "fsl-ls1046a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	qflash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 50f68ca5a..1515cec23 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -445,46 +445,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x00000029
-				0x00000002 0x0000002f
-				0x00000003 0x00000036
-				0x00000004 0x0000003c
-				0x00000005 0x00000042
-				0x00000006 0x00000049
-				0x00000007 0x0000004f
-				0x00000008 0x00000055
-				0x00000009 0x0000005c
-				0x0000000a 0x00000062
-				0x0000000b 0x00000068
+				<0x00000000 0x00000023>,
+				<0x00000001 0x00000029>,
+				<0x00000002 0x0000002f>,
+				<0x00000003 0x00000036>,
+				<0x00000004 0x0000003c>,
+				<0x00000005 0x00000042>,
+				<0x00000006 0x00000049>,
+				<0x00000007 0x0000004f>,
+				<0x00000008 0x00000055>,
+				<0x00000009 0x0000005c>,
+				<0x0000000a 0x00000062>,
+				<0x0000000b 0x00000068>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x0000003e
-				0x00020004 0x00000048
-				0x00020005 0x00000052
-				0x00020006 0x0000005c
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x0000003e>,
+				<0x00020004 0x00000048>,
+				<0x00020005 0x00000052>,
+				<0x00020006 0x0000005c>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000011
-				0x00030001 0x0000001a
-				0x00030002 0x00000024
-				0x00030003 0x0000002e
-				0x00030004 0x00000038
-				0x00030005 0x00000042
-				0x00030006 0x0000004c
-				0x00030007 0x00000056>;
+				<0x00030000 0x00000011>,
+				<0x00030001 0x0000001a>,
+				<0x00030002 0x00000024>,
+				<0x00030003 0x0000002e>,
+				<0x00030004 0x00000038>,
+				<0x00030005 0x00000042>,
+				<0x00030006 0x0000004c>,
+				<0x00030007 0x00000056>;
 			big-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
new file mode 100644
index 000000000..e567918f6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a-mbls10xxa.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "fsl-ls1088a-tqmls1088a.dtsi"
+#include "tqmls10xxa-mbls10xxa.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH LS1088A TQMLS1088A SoM on MBLS10xxA board";
+	compatible = "tq,ls1088a-tqmls1088a-mbls10xxa", "tq,ls1088a-tqmls1088a",
+		     "fsl,ls1088a";
+
+	aliases {
+		dpmac1 = &dpmac1;
+		dpmac2 = &dpmac2;
+		dpmac3 = &dpmac3;
+		dpmac4 = &dpmac4;
+		dpmac5 = &dpmac5;
+		dpmac6 = &dpmac6;
+		dpmac7 = &dpmac7;
+		dpmac8 = &dpmac8;
+		dpmac9 = &dpmac9;
+		dpmac10 = &dpmac10;
+		qsgmii-s1-p1 = &qsgmii1_phy1;
+		qsgmii-s1-p2 = &qsgmii1_phy2;
+		qsgmii-s1-p3 = &qsgmii1_phy3;
+		qsgmii-s1-p4 = &qsgmii1_phy4;
+		qsgmii-s2-p1 = &qsgmii2_phy1;
+		qsgmii-s2-p2 = &qsgmii2_phy2;
+		qsgmii-s2-p3 = &qsgmii2_phy3;
+		qsgmii-s2-p4 = &qsgmii2_phy4;
+		rgmii-s1 = &rgmii_phy1;
+		rgmii-s2 = &rgmii_phy2;
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = &duart1;
+	};
+};
+
+&esdhc {
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
+&sfp2_i2c {
+	status = "okay";
+};
+
+#include "tqmls1088a-mbls10xxa-mc.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
new file mode 100644
index 000000000..9a0f21484
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-tqmls1088a.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for LS1088A based SoM of TQ
+ */
+
+#include "fsl-ls1088a.dtsi"
+#include "tqmls10xxa.dtsi"
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	qflash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <62500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 8f6090a9a..8616d5e0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -284,46 +284,46 @@
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000023
-				0x00000001 0x0000002a
-				0x00000002 0x00000030
-				0x00000003 0x00000037
-				0x00000004 0x0000003d
-				0x00000005 0x00000044
-				0x00000006 0x0000004a
-				0x00000007 0x00000051
-				0x00000008 0x00000057
-				0x00000009 0x0000005e
-				0x0000000a 0x00000064
-				0x0000000b 0x0000006b
+				<0x00000000 0x00000023>,
+				<0x00000001 0x0000002a>,
+				<0x00000002 0x00000030>,
+				<0x00000003 0x00000037>,
+				<0x00000004 0x0000003d>,
+				<0x00000005 0x00000044>,
+				<0x00000006 0x0000004a>,
+				<0x00000007 0x00000051>,
+				<0x00000008 0x00000057>,
+				<0x00000009 0x0000005e>,
+				<0x0000000a 0x00000064>,
+				<0x0000000b 0x0000006b>,
 				/* Calibration data group 2 */
-				0x00010000 0x00000022
-				0x00010001 0x0000002a
-				0x00010002 0x00000032
-				0x00010003 0x0000003a
-				0x00010004 0x00000042
-				0x00010005 0x0000004a
-				0x00010006 0x00000052
-				0x00010007 0x0000005a
-				0x00010008 0x00000062
-				0x00010009 0x0000006a
+				<0x00010000 0x00000022>,
+				<0x00010001 0x0000002a>,
+				<0x00010002 0x00000032>,
+				<0x00010003 0x0000003a>,
+				<0x00010004 0x00000042>,
+				<0x00010005 0x0000004a>,
+				<0x00010006 0x00000052>,
+				<0x00010007 0x0000005a>,
+				<0x00010008 0x00000062>,
+				<0x00010009 0x0000006a>,
 				/* Calibration data group 3 */
-				0x00020000 0x00000021
-				0x00020001 0x0000002b
-				0x00020002 0x00000035
-				0x00020003 0x00000040
-				0x00020004 0x0000004a
-				0x00020005 0x00000054
-				0x00020006 0x0000005e
+				<0x00020000 0x00000021>,
+				<0x00020001 0x0000002b>,
+				<0x00020002 0x00000035>,
+				<0x00020003 0x00000040>,
+				<0x00020004 0x0000004a>,
+				<0x00020005 0x00000054>,
+				<0x00020006 0x0000005e>,
 				/* Calibration data group 4 */
-				0x00030000 0x00000010
-				0x00030001 0x0000001c
-				0x00030002 0x00000027
-				0x00030003 0x00000032
-				0x00030004 0x0000003e
-				0x00030005 0x00000049
-				0x00030006 0x00000054
-				0x00030007 0x00000060>;
+				<0x00030000 0x00000010>,
+				<0x00030001 0x0000001c>,
+				<0x00030002 0x00000027>,
+				<0x00030003 0x00000032>,
+				<0x00030004 0x0000003e>,
+				<0x00030005 0x00000049>,
+				<0x00030006 0x00000054>,
+				<0x00030007 0x00000060>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 717288bbd..0b7292835 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -321,42 +321,43 @@
 			reg = <0x0 0x1f80000 0x0 0x10000>;
 			interrupts = <0 23 0x4>;
 			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
-			fsl,tmu-calibration = <0x00000000 0x00000026
-					       0x00000001 0x0000002d
-					       0x00000002 0x00000032
-					       0x00000003 0x00000039
-					       0x00000004 0x0000003f
-					       0x00000005 0x00000046
-					       0x00000006 0x0000004d
-					       0x00000007 0x00000054
-					       0x00000008 0x0000005a
-					       0x00000009 0x00000061
-					       0x0000000a 0x0000006a
-					       0x0000000b 0x00000071
-
-					       0x00010000 0x00000025
-					       0x00010001 0x0000002c
-					       0x00010002 0x00000035
-					       0x00010003 0x0000003d
-					       0x00010004 0x00000045
-					       0x00010005 0x0000004e
-					       0x00010006 0x00000057
-					       0x00010007 0x00000061
-					       0x00010008 0x0000006b
-					       0x00010009 0x00000076
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000049
-					       0x00020004 0x00000056
-					       0x00020005 0x00000061
-					       0x00020006 0x0000006d
-
-					       0x00030000 0x00000021
-					       0x00030001 0x0000002a
-					       0x00030002 0x0000003c
-					       0x00030003 0x0000004e>;
+			fsl,tmu-calibration =
+					<0x00000000 0x00000026>,
+					<0x00000001 0x0000002d>,
+					<0x00000002 0x00000032>,
+					<0x00000003 0x00000039>,
+					<0x00000004 0x0000003f>,
+					<0x00000005 0x00000046>,
+					<0x00000006 0x0000004d>,
+					<0x00000007 0x00000054>,
+					<0x00000008 0x0000005a>,
+					<0x00000009 0x00000061>,
+					<0x0000000a 0x0000006a>,
+					<0x0000000b 0x00000071>,
+
+					<0x00010000 0x00000025>,
+					<0x00010001 0x0000002c>,
+					<0x00010002 0x00000035>,
+					<0x00010003 0x0000003d>,
+					<0x00010004 0x00000045>,
+					<0x00010005 0x0000004e>,
+					<0x00010006 0x00000057>,
+					<0x00010007 0x00000061>,
+					<0x00010008 0x0000006b>,
+					<0x00010009 0x00000076>,
+
+					<0x00020000 0x00000029>,
+					<0x00020001 0x00000033>,
+					<0x00020002 0x0000003d>,
+					<0x00020003 0x00000049>,
+					<0x00020004 0x00000056>,
+					<0x00020005 0x00000061>,
+					<0x00020006 0x0000006d>,
+
+					<0x00030000 0x00000021>,
+					<0x00030001 0x0000002a>,
+					<0x00030002 0x0000003c>,
+					<0x00030003 0x0000004e>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
new file mode 100644
index 000000000..da0f58e26
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "fsl-lx2160a-tqmlx2160a.dtsi"
+
+/ {
+	model = "TQ Systems GmbH MBLX2160A Starterkit";
+	compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a",
+		     "fsl,lx2160a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			label = "button:user1";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-user2 {
+			label = "button:user2";
+			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user1 {
+			gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sfp_xfi1: sfp-xfi1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi1_i2c>;
+		mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	sfp_xfi2: sfp-xfi2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&xfi2_i2c>;
+		mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&dp83867_2_3>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&dp83867_2_4>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	dp83867_1_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_5: ethernet-phy@5 {
+		reg = <5>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_1_6: ethernet-phy@6 {
+		reg = <6>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	dp83867_2_1: ethernet-phy@1 {
+		reg = <1>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_2: ethernet-phy@2 {
+		reg = <2>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+
+	dp83867_2_4: ethernet-phy@4 {
+		reg = <4>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	no-mmc;
+	no-sdio;
+	wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	gpioex3: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioex0: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex1: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+
+			gpioex2: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				vcc-supply = <&reg_vcc3v3>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&reg_vcc3v3>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi1_i2c: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xfi2_i2c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
new file mode 100644
index 000000000..8284a564e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac9 {
+	phy-handle = <&dp83867_2_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&dp83867_2_2>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
new file mode 100644
index 000000000..636b17a38
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac1 {
+	managed = "in-band-status";
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
new file mode 100644
index 000000000..6d0c808cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	phy-handle = <&dp83867_1_5>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	phy-handle = <&dp83867_1_6>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
new file mode 100644
index 000000000..db88a86ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac12 {
+	phy-handle = <&dp83867_1_1>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&dpmac16 {
+	phy-handle = <&dp83867_1_4>;
+	phy-connection-type = "sgmii";
+	managed = "in-band-status";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
new file mode 100644
index 000000000..f6dfa76aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+/dts-v1/;
+/plugin/;
+
+&dpmac13 {
+	sfp = <&sfp_xfi1>;
+	managed = "in-band-status";
+};
+
+&dpmac14 {
+	sfp = <&sfp_xfi2>;
+	managed = "in-band-status";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sfp_xfi1 {
+	status = "okay";
+};
+
+&sfp_xfi2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
new file mode 100644
index 000000000..89a476573
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger
+ */
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+
+	flash1: flash@1 {
+		compatible = "jedec,spi-nor";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <10000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1f {
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom2: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ea6a94b57..6640b4967 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -626,6 +626,13 @@
 			#phy-cells = <1>;
 		};
 
+		serdes_2: phy@1eb0000 {
+			compatible = "fsl,lynx-28g";
+			reg = <0x0 0x1eb0000 0x0 0x1e30>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		crypto: crypto@8000000 {
 			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 			fsl,sec-era = <10>;
@@ -725,9 +732,9 @@
 			fsl,tmu-range = <0x800000e6 0x8001017d>;
 			fsl,tmu-calibration =
 				/* Calibration data group 1 */
-				<0x00000000 0x00000035
+				<0x00000000 0x00000035>,
 				/* Calibration data group 2 */
-				0x00000001 0x00000154>;
+				<0x00000001 0x00000154>;
 			little-endian;
 			#thermal-sensor-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
new file mode 100644
index 000000000..9f88583aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162A Clearfog
+//
+// Copyright 2023 Josua Mayer <josua@solid-run.com>
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+#include "fsl-lx2162a-sr-som.dtsi"
+
+/ {
+	model = "SolidRun LX2162A Clearfog";
+	compatible = "solidrun,lx2162a-clearfog", "solidrun,lx2162a-som", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		i2c0 = &i2c0;
+		i2c1 = &i2c2;
+		i2c2 = &i2c4;
+		i2c3 = &sfp_i2c0;
+		i2c4 = &sfp_i2c1;
+		i2c5 = &sfp_i2c2;
+		i2c6 = &sfp_i2c3;
+		i2c7 = &mpcie1_i2c;
+		i2c8 = &mpcie0_i2c;
+		i2c9 = &pcieclk_i2c;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sfp_at: led-sfp-at {
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* PROC_IRQ5 */
+			default-state = "off";
+		};
+
+		led_sfp_ab: led-sfp-ab {
+			gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* PROC_IRQ11 */
+			default-state = "off";
+		};
+
+		led_sfp_bt: led-sfp-bt {
+			gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; /* EVT1_B */
+			default-state = "off";
+		};
+
+		led_sfp_bb: led-sfp-bb {
+			gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; /* EVT2_B */
+			default-state = "off";
+		};
+	};
+
+	sfp_at: sfp-at {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c0>;
+		mod-def0-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; /* EVT4_B */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_ab: sfp-ab {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c1>;
+		mod-def0-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; /* PROC_IRQ1 */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_bt: sfp-bt {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c2>;
+		mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* PROC_IRQ10 */
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_bb: sfp-bb {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c3>;
+		mod-def0-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; /* EVT3_B */
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&dpmac3 {
+	sfp = <&sfp_at>;
+	managed = "in-band-status";
+	phys = <&serdes_1 7>;
+};
+
+&dpmac4 {
+	sfp = <&sfp_ab>;
+	managed = "in-band-status";
+	phys = <&serdes_1 6>;
+};
+
+&dpmac5 {
+	sfp = <&sfp_bt>;
+	managed = "in-band-status";
+	phys = <&serdes_1 5>;
+};
+
+&dpmac6 {
+	sfp = <&sfp_bb>;
+	managed = "in-band-status";
+	phys = <&serdes_1 4>;
+};
+
+&dpmac11 {
+	phys = <&serdes_2 0>;
+	phy-handle = <&ethernet_phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac12 {
+	phys = <&serdes_2 1>;
+	phy-handle = <&ethernet_phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac13 {
+	phys = <&serdes_2 6>;
+	phy-handle = <&ethernet_phy6>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac14 {
+	phys = <&serdes_2 7>;
+	phy-handle = <&ethernet_phy8>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac15 {
+	phys = <&serdes_2 4>;
+	phy-handle = <&ethernet_phy4>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac16 {
+	phys = <&serdes_2 5>;
+	phy-handle = <&ethernet_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac17 {
+	/* override connection to on-SoM phy */
+	/delete-property/ phy-handle;
+	/delete-property/ phy-connection-type;
+
+	phys = <&serdes_2 2>;
+	phy-handle = <&ethernet_phy5>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&dpmac18 {
+	phys = <&serdes_2 3>;
+	phy-handle = <&ethernet_phy7>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&emdio1 {
+	ethernet_phy1: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy2: ethernet-phy@9 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <9>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy3: ethernet-phy@10 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <10>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy4: ethernet-phy@11 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <11>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy5: ethernet-phy@12 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <12>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy6: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <13>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy7: ethernet-phy@14 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <14>;
+		max-speed = <1000>;
+	};
+
+	ethernet_phy8: ethernet-phy@15 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <15>;
+		max-speed = <1000>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&ethernet_phy0 {
+	/*
+	 * SoM has a phy at address 1 connected to SoC Ethernet Controller 1.
+	 * It competes for WRIOP MAC17, and no connector has been wired.
+	 */
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* retimer@18 */
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		sfp_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfp_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		sfp_i2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		sfp_i2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		mpcie1_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		mpcie0_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		pcieclk_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* clock-controller@6b */
+		};
+	};
+};
+
+&pcie3 {
+	status = "disabled";
+};
+
+&pcie4 {
+	status = "disabled";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio11 {
+	status = "okay";
+};
+
+&pcs_mdio12 {
+	status = "okay";
+};
+
+&pcs_mdio13 {
+	status = "okay";
+};
+
+&pcs_mdio14 {
+	status = "okay";
+};
+
+&pcs_mdio15 {
+	status = "okay";
+};
+
+&pcs_mdio16 {
+	status = "okay";
+};
+
+&pcs_mdio17 {
+	status = "okay";
+};
+
+&pcs_mdio18 {
+	status = "okay";
+};
+
+&serdes_1 {
+	status = "okay";
+};
+
+&serdes_2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
new file mode 100644
index 000000000..0580ea30c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162A-SOM
+//
+// Copyright 2021 Rabeeh Khoury <rabeeh@solid-run.com>
+// Copyright 2023 Josua Mayer <josua@solid-run.com>
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&ethernet_phy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	ethernet_phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fan-controller@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	ddr_spd: eeprom@51 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x51>;
+		read-only;
+	};
+
+	config_eeprom: eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	variable_eeprom: eeprom@54 {
+		compatible = "st,24c2048", "atmel,24c2048";
+		reg = <0x54>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
index c6d51f116..5438923a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -165,7 +165,6 @@
 			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
 			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
 			  "gpio5-31";
-	ngpios = <32>;
 };
 
 /* Apalis PWM3, MXM3 pin 6 */
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
index 40067ab8a..f6654fdcb 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -68,6 +68,7 @@
 		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can1_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_can2_supply: regulator-can2-supply {
@@ -77,6 +78,7 @@
 		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-name = "can2_supply";
+		startup-delay-us = <1000>;
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
@@ -212,7 +214,6 @@
 			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
 			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
 			  "gpio5-31";
-	ngpios = <32>;
 };
 
 /* Apalis PWM3, MXM3 pin 6 */
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 0878a15ac..f69b0c175 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -261,7 +261,7 @@
 			reset-assert-us = <2>;
 			reset-deassert-us = <2>;
 			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
-			reset-names = "phy-reset";
+			reset-names = "phy";
 		};
 	};
 };
@@ -500,15 +500,6 @@
 			  "MXM3_185",
 			  "MXM3_187";
 
-	/*
-	 * Add GPIO2_20 as a wakeup source:
-	 * Pin:  101	SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
-	 * Type: 5	SC_PAD_WAKEUP_FALL_EDGE
-	 * Line: 20
-	 */
-	pad-wakeup = <IMX8QM_SPI3_CS0 5 20>;
-	pad-wakeup-num = <1>;
-
 	pcie-wifi-hog {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 6c8d75ef9..f057c6b21 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -7,17 +7,73 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+audio_ipg_clk: clock-audio-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <120000000>;
+	clock-output-names = "audio_ipg_clk";
+};
+
 audio_subsys: bus@59000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
 
-	audio_ipg_clk: clock-audio-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <120000000>;
-		clock-output-names = "audio_ipg_clk";
+	edma0: dma-controller@591f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x591f0000 0x190000>;
+		#dma-cells = <3>;
+		dma-channels = <24>;
+		dma-channel-mask = <0x5c0c00>;
+		interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+			     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+			     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+			     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+			     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+			     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 6 esai0 */
+			     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* 7 */
+			     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* 8 spdif0 */
+			     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, /* 9 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 10 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 11 unused */
+			     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 12 sai0 */
+			     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* 13 */
+			     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 14 sai1 */
+			     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* 15 */
+			     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* 16 sai2 */
+			     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* 17 sai3 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 18 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 19 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 20 unused */
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, /* 21 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 22 unused */
+			     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; /* 23 unused */
+		power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+				<&pd IMX_SC_R_DMA_0_CH1>,
+				<&pd IMX_SC_R_DMA_0_CH2>,
+				<&pd IMX_SC_R_DMA_0_CH3>,
+				<&pd IMX_SC_R_DMA_0_CH4>,
+				<&pd IMX_SC_R_DMA_0_CH5>,
+				<&pd IMX_SC_R_DMA_0_CH6>,
+				<&pd IMX_SC_R_DMA_0_CH7>,
+				<&pd IMX_SC_R_DMA_0_CH8>,
+				<&pd IMX_SC_R_DMA_0_CH9>,
+				<&pd IMX_SC_R_DMA_0_CH10>,
+				<&pd IMX_SC_R_DMA_0_CH11>,
+				<&pd IMX_SC_R_DMA_0_CH12>,
+				<&pd IMX_SC_R_DMA_0_CH13>,
+				<&pd IMX_SC_R_DMA_0_CH14>,
+				<&pd IMX_SC_R_DMA_0_CH15>,
+				<&pd IMX_SC_R_DMA_0_CH16>,
+				<&pd IMX_SC_R_DMA_0_CH17>,
+				<&pd IMX_SC_R_DMA_0_CH18>,
+				<&pd IMX_SC_R_DMA_0_CH19>,
+				<&pd IMX_SC_R_DMA_0_CH20>,
+				<&pd IMX_SC_R_DMA_0_CH21>,
+				<&pd IMX_SC_R_DMA_0_CH22>,
+				<&pd IMX_SC_R_DMA_0_CH23>;
 	};
 
 	dsp_lpcg: clock-controller@59580000 {
@@ -65,4 +121,34 @@ audio_subsys: bus@59000000 {
 		memory-region = <&dsp_reserved>;
 		status = "disabled";
 	};
+
+	edma1: dma-controller@599f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x599f0000 0xc0000>;
+		#dma-cells = <3>;
+		dma-channels = <11>;
+		dma-channel-mask = <0xc0>;
+		interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */
+			     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, /* 1 */
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, /* 2 */
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, /* 3 */
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, /* 4 */
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, /* 5 */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 6 unused */
+			     <GIC_SPI 0   IRQ_TYPE_LEVEL_HIGH>, /* 7 unused */
+			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+			     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+		power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+				<&pd IMX_SC_R_DMA_1_CH1>,
+				<&pd IMX_SC_R_DMA_1_CH2>,
+				<&pd IMX_SC_R_DMA_1_CH3>,
+				<&pd IMX_SC_R_DMA_1_CH4>,
+				<&pd IMX_SC_R_DMA_1_CH5>,
+				<&pd IMX_SC_R_DMA_1_CH6>,
+				<&pd IMX_SC_R_DMA_1_CH7>,
+				<&pd IMX_SC_R_DMA_1_CH8>,
+				<&pd IMX_SC_R_DMA_1_CH9>,
+				<&pd IMX_SC_R_DMA_1_CH10>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index fc1a5d343..4aaf5a0c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -7,33 +7,33 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+conn_axi_clk: clock-conn-axi {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <333333333>;
+	clock-output-names = "conn_axi_clk";
+};
+
+conn_ahb_clk: clock-conn-ahb {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <166666666>;
+	clock-output-names = "conn_ahb_clk";
+};
+
+conn_ipg_clk: clock-conn-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <83333333>;
+	clock-output-names = "conn_ipg_clk";
+};
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
 
-	conn_axi_clk: clock-conn-axi {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <333333333>;
-		clock-output-names = "conn_axi_clk";
-	};
-
-	conn_ahb_clk: clock-conn-ahb {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <166666666>;
-		clock-output-names = "conn_ahb_clk";
-	};
-
-	conn_ipg_clk: clock-conn-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <83333333>;
-		clock-output-names = "conn_ipg_clk";
-	};
-
 	usbotg1: usb@5b0d0000 {
 		compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 		reg = <0x5b0d0000 0x200>;
@@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index adb98a72b..67b3c7573 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -7,19 +7,19 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+dma_ipg_clk: clock-dma-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <120000000>;
+	clock-output-names = "dma_ipg_clk";
+};
+
 dma_subsys: bus@5a000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
 
-	dma_ipg_clk: clock-dma-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <120000000>;
-		clock-output-names = "dma_ipg_clk";
-	};
-
 	lpspi0: spi@5a000000 {
 		compatible = "fsl,imx7ulp-spi";
 		reg = <0x5a000000 0x10000>;
@@ -27,8 +27,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -43,8 +43,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -59,8 +59,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -75,8 +75,8 @@ dma_subsys: bus@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -86,52 +86,135 @@ dma_subsys: bus@5a000000 {
 
 	lpuart0: serial@5a060000 {
 		reg = <0x5a060000 0x1000>;
-		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
 			 <&uart0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
 		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_0>;
+		dma-names = "tx","rx";
+		dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
 		status = "disabled";
 	};
 
 	lpuart1: serial@5a070000 {
 		reg = <0x5a070000 0x1000>;
-		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
 			 <&uart1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
 		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_1>;
+		dma-names = "tx","rx";
+		dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
 		status = "disabled";
 	};
 
 	lpuart2: serial@5a080000 {
 		reg = <0x5a080000 0x1000>;
-		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
 			 <&uart2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
 		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_2>;
+		dma-names = "tx","rx";
+		dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
 		status = "disabled";
 	};
 
 	lpuart3: serial@5a090000 {
 		reg = <0x5a090000 0x1000>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
 			 <&uart3_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "baud";
 		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <80000000>;
 		power-domains = <&pd IMX_SC_R_UART_3>;
+		dma-names = "tx","rx";
+		dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
 		status = "disabled";
 	};
 
+	adma_pwm: pwm@5a190000 {
+		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
+		reg = <0x5a190000 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
+	edma2: dma-controller@5a1f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a1f0000 0x170000>;
+		#dma-cells = <3>;
+		dma-channels = <16>;
+		interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+				<&pd IMX_SC_R_DMA_2_CH1>,
+				<&pd IMX_SC_R_DMA_2_CH2>,
+				<&pd IMX_SC_R_DMA_2_CH3>,
+				<&pd IMX_SC_R_DMA_2_CH4>,
+				<&pd IMX_SC_R_DMA_2_CH5>,
+				<&pd IMX_SC_R_DMA_2_CH6>,
+				<&pd IMX_SC_R_DMA_2_CH7>,
+				<&pd IMX_SC_R_DMA_2_CH8>,
+				<&pd IMX_SC_R_DMA_2_CH9>,
+				<&pd IMX_SC_R_DMA_2_CH10>,
+				<&pd IMX_SC_R_DMA_2_CH11>,
+				<&pd IMX_SC_R_DMA_2_CH12>,
+				<&pd IMX_SC_R_DMA_2_CH13>,
+				<&pd IMX_SC_R_DMA_2_CH14>,
+				<&pd IMX_SC_R_DMA_2_CH15>;
+	};
+
+	edma3: dma-controller@5a9f0000 {
+		compatible = "fsl,imx8qm-edma";
+		reg = <0x5a9f0000 0x90000>;
+		#dma-cells = <3>;
+		dma-channels = <8>;
+		interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+				<&pd IMX_SC_R_DMA_3_CH1>,
+				<&pd IMX_SC_R_DMA_3_CH2>,
+				<&pd IMX_SC_R_DMA_3_CH3>,
+				<&pd IMX_SC_R_DMA_3_CH4>,
+				<&pd IMX_SC_R_DMA_3_CH5>,
+				<&pd IMX_SC_R_DMA_3_CH6>,
+				<&pd IMX_SC_R_DMA_3_CH7>;
+	};
+
 	spi0_lpcg: clock-controller@5a400000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5a400000 0x10000>;
@@ -228,6 +311,18 @@ dma_subsys: bus@5a000000 {
 		power-domains = <&pd IMX_SC_R_UART_3>;
 	};
 
+	adma_pwm_lpcg: clock-controller@5a590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adma_pwm_lpcg_clk",
+				     "adma_pwm_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_LCD_0_PWM_0>;
+	};
+
 	i2c0: i2c@5a800000 {
 		reg = <0x5a800000 0x4000>;
 		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,8 +377,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -297,8 +392,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -311,8 +406,8 @@ dma_subsys: bus@5a000000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -332,8 +427,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -353,8 +448,8 @@ dma_subsys: bus@5a000000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index a90654155..e7783cc2d 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -3,25 +3,22 @@
  * Copyright 2019-2021 NXP
  * Zhou Guoniu <guoniu.zhou@nxp.com>
  */
+img_ipg_clk: clock-img-ipg {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <200000000>;
+	clock-output-names = "img_ipg_clk";
+};
+
 img_subsys: bus@58000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
 
-	img_ipg_clk: clock-img-ipg {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-		clock-output-names = "img_ipg_clk";
-	};
-
 	jpegdec: jpegdec@58400000 {
 		reg = <0x58400000 0x00050000>;
-		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
@@ -29,18 +26,13 @@ img_subsys: bus@58000000 {
 				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
-				<&pd IMX_SC_R_MJPEG_DEC_S0>,
-				<&pd IMX_SC_R_MJPEG_DEC_S1>,
-				<&pd IMX_SC_R_MJPEG_DEC_S2>,
-				<&pd IMX_SC_R_MJPEG_DEC_S3>;
+				<&pd IMX_SC_R_MJPEG_DEC_S0>;
+		slot = <0>;
 	};
 
 	jpegenc: jpegenc@58450000 {
 		reg = <0x58450000 0x00050000>;
-		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
 			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
@@ -48,10 +40,8 @@ img_subsys: bus@58000000 {
 				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
 		assigned-clock-rates = <200000000>, <200000000>;
 		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
-				<&pd IMX_SC_R_MJPEG_ENC_S0>,
-				<&pd IMX_SC_R_MJPEG_ENC_S1>,
-				<&pd IMX_SC_R_MJPEG_ENC_S2>,
-				<&pd IMX_SC_R_MJPEG_ENC_S3>;
+				<&pd IMX_SC_R_MJPEG_ENC_S0>;
+		slot = <0>;
 	};
 
 	img_jpeg_dec_lpcg: clock-controller@585d0000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 133f2b1ce..764c1a08e 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -7,6 +7,13 @@
 #include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+lsio_bus_clk: clock-lsio-bus {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <100000000>;
+	clock-output-names = "lsio_bus_clk";
+};
+
 lsio_subsys: bus@5d000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
@@ -14,26 +21,12 @@ lsio_subsys: bus@5d000000 {
 	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
 		 <0x08000000 0x0 0x08000000 0x10000000>;
 
-	lsio_mem_clk: clock-lsio-mem {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-		clock-output-names = "lsio_mem_clk";
-	};
-
-	lsio_bus_clk: clock-lsio-bus {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-output-names = "lsio_bus_clk";
-	};
-
 	lsio_pwm0: pwm@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -45,8 +38,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -58,8 +51,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -71,8 +64,8 @@ lsio_subsys: bus@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index b9157ca08..b972658ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -186,7 +186,6 @@
 &flexspi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexspi0>;
-	nxp,fspi-dll-slvdly = <4>;
 	status = "okay";
 
 	mt35xu512aba0: flash@0 {
@@ -365,7 +364,6 @@
 	fsl,spi-only-use-cs1-sel;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lpspi3>;
-	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	spidev0: spi@0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
index e2eeddf38..0a477f631 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -15,23 +15,53 @@
 	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&edma2 {
+	interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma3 {
+	interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &i2c0 {
-	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &i2c1 {
-	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &i2c2 {
-	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 };
 
 &i2c3 {
-	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx7ulp-lpi2c";
 	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 652493ae4..6d13e4faf 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -6,7 +6,7 @@
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
 
-&conn_subsys {
+/ {
 	conn_enet0_root_clk: clock-conn-enet0-root {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -14,13 +14,22 @@
 		clock-output-names = "conn_enet0_root_clk";
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+};
+
+&conn_subsys {
 	eqos: ethernet@5b050000 {
 		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
 		reg = <0x5b050000 0x10000>;
 		interrupt-parent = <&gic>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "eth_wake_irq", "macirq";
+		interrupt-names = "macirq", "eth_wake_irq";
 		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
 			 <&eqos_lpcg IMX_LPCG_CLK_6>,
 			 <&eqos_lpcg IMX_LPCG_CLK_0>,
@@ -51,13 +60,6 @@
 		rx-burst-size-dword = <0x10>;
 		power-domains = <&pd IMX_SC_R_USB_1>;
 		status = "disabled";
-
-		clk_dummy: clock-dummy {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "clk_dummy";
-		};
 	};
 
 	usbmisc2: usbmisc@5b0e0200 {
@@ -116,7 +118,7 @@
 };
 
 &fec1 {
-	compatible = "fsl,imx8qm-fec";
+	compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
 	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
index 550f51370..3569abb5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -4,6 +4,6 @@
  */
 
 &ddr_pmu0 {
-	compatible = "fsl,imx8-ddr-pmu";
+	compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu";
 	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index 792b7224c..f580eb6db 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -122,10 +122,8 @@
 			  &lsio_mu1 3 3>;
 
 		pd: power-controller {
-			compatible = "fsl,scu-pd";
+			compatible = "fsl,imx8dl-scu-pd", "fsl,scu-pd";
 			#power-domain-cells = <1>;
-			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
-				     239 240 166 169>;
 		};
 
 		clk: clock-controller {
@@ -168,12 +166,12 @@
 		};
 
 		watchdog {
-			compatible = "fsl,imx-sc-wdt";
+			compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
 
 		tsens: thermal-sensor {
-			compatible = "fsl,imx-sc-thermal";
+			compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal";
 			#thermal-sensor-cells = <1>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index b10e2a703..6086dae2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -6,6 +6,13 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -98,18 +105,46 @@
 		enable-active-high;
 	};
 
-	sound {
-		compatible = "fsl,imx-audio-wm8962";
-		model = "wm8962-audio";
-		audio-cpu = <&sai3>;
-		audio-codec = <&wm8962>;
-		audio-routing =
-			"Headphone Jack", "HPOUTL",
-			"Headphone Jack", "HPOUTR",
-			"Ext Spk", "SPKOUTL",
-			"Ext Spk", "SPKOUTR",
-			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dmic";
+		simple-audio-card,format = "pdm";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
 	};
 };
 
@@ -192,6 +227,7 @@
 			0x0000 /* 4:FN_DMICCDAT */
 			0x0000 /* 5:Default */
 		>;
+		#sound-dai-cells = <0>;
 	};
 
 	pca6416_0: gpio@20 {
@@ -215,6 +251,15 @@
 	};
 };
 
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MM_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
 &mipi_csi {
 	status = "okay";
 	ports {
@@ -352,6 +397,13 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_PDM_CLK	0xd6
+			MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_reg_usb_otg1: usbotg1grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index f264102bd..62ed64663 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mm-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
index 010e836eb..27848cee1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -23,7 +23,6 @@
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
index d897a8527..44c2cba41 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -104,7 +104,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index a882c86ec..b53104ed8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -367,12 +367,6 @@
 		interrupts = <11 8>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -384,6 +378,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 8b16bd685..d9fa0deea 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -294,8 +294,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -313,19 +313,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -337,40 +337,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index dcec57c20..aab8e2421 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -279,8 +279,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -292,19 +292,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -316,40 +316,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
-			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index 6e75ab879..60abcb636 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -210,7 +210,7 @@
 		reg = <0x52>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc>;
-		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_LOW>;
 		trickle-diode-disable;
 	};
 };
@@ -252,8 +252,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 1f8326613..2076148e0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -237,8 +237,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
index 0e8f0d716..12fb79d20 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -220,7 +220,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c3@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
new file mode 100644
index 000000000..b31436b5e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu_2d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&gpu_3d {
+	assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+			  <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+	assigned-clock-rates = <0>, <1000000000>;
+};
+
+&vpu_blk_ctrl {
+	assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+			  <&clk IMX8MM_CLK_VPU_G2>,
+			  <&clk IMX8MM_CLK_VPU_H1>,
+			  <&clk IMX8MM_VPU_PLL_OUT>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>,
+				 <&clk IMX8MM_VPU_PLL_OUT>,
+				 <&clk IMX8MM_SYS_PLL3_OUT>;
+	assigned-clock-rates = <750000000>,
+			       <700000000>,
+			       <750000000>,
+			       <700000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
index 606a4f4d5..75bbedc61 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -111,6 +111,11 @@
 	};
 };
 
+/* QSPI is not populated on the SoM */
+&flexspi {
+	status = "disabled";
+};
+
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
new file mode 100644
index 000000000..27a902569
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyGATE-Tauri-L-iMX8MM";
+	compatible = "phytec,imx8mm-phygate-tauri-l",
+		     "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	can_osc_40m: clock-can {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "can_osc_40m";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			label = "KEY-A";
+			linux,code = <KEY_A>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	usdhc1_pwrseq: pwr-seq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		regulator-name = "usb_hub_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+		   <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* CAN MCP251XFD */
+	can0: can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		clocks = <&can_osc_40m>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		spi-max-frequency = <10000000>;
+	};
+
+	tpm: tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <1>;
+		spi-max-frequency = <38000000>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	temp_sense0: temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* PCIe */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_PHY>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_100M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <100000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+/* RTC */
+&rv3028 {
+	trickle-resistor-ohms = <3000>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* UART2 - RS232 */
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* UART - console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	over-current-active-low;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	vbus-supply = <&reg_usb_hub_vbus>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can_int: can-intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x00
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x00
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00
+		>;
+	};
+
+	pinctrl_gpiokeys: keygrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x00
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x1e0
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x1e0
+		>;
+	};
+
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x1e0
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x1e0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL	0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x1e0
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x1e0
+		>;
+	};
+
+	pinctrl_leds: leds1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x00
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* COEX2 */
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x00
+			/* COEX1 */
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x12
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x40
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT		0x40
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT	0x40
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x40
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x00
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x00
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x00
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x00
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x00
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x80
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0xc6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x40
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x192
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d2
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d2
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d2
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d2
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d2
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000..e44249c6d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+       status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 156d793a0..ea6e8b851 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
 	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index b4466a26d..8c0c6e715 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -230,6 +230,11 @@
 	};
 };
 
+&mipi_dsi {
+	vddcore-supply = <&ldo4_reg>;
+	vddio-supply = <&ldo3_reg>;
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	fsl,clkreq-unsupported;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 0ce60ad9c..bbbaf2165 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -47,17 +47,6 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
 /* off-board header */
@@ -96,7 +85,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -145,9 +133,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -205,14 +194,6 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
@@ -235,4 +216,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 570992a52..752caa38e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -84,8 +84,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -118,7 +125,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -153,23 +159,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,3 {
+			pcie@3,0 {
 				reg = <0x1800 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@5,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -313,6 +326,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 1800c6a4b..2aa6c1090 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -104,8 +104,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio1 {
@@ -138,7 +145,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -173,23 +179,30 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		pcie@1,0 {
+		pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
-			pcie@2,4 {
+			pcie@4,0 {
 				reg = <0x2000 0 0 0 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
 
-				eth1: pcie@6,0 {
+				eth1: ethernet@0,0 {
 					reg = <0x0000 0 0 0 0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
 
 					local-mac-address = [00 00 00 00 00 00];
 				};
@@ -362,6 +375,7 @@
 			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
 			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
 			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xd6
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index ed46d4f3e..87b80e241 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -357,6 +357,8 @@
 		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -642,7 +644,6 @@
 		pinctrl-0 = <&pinctrl_ksz>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
-		phy-mode = "rgmii-id";
 
 		ports {
 			#address-cells = <1>;
@@ -678,7 +679,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&fec1>;
 				phy-mode = "rgmii-id";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index b318c2d08..c11260c26 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -314,6 +314,8 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -585,7 +587,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -634,13 +635,16 @@
 
 	pcie@0,0 {
 		reg = <0x0000 0 0 0 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
 
-		eth1: pcie@1,0 {
+		eth1: ethernet@0,0 {
 			reg = <0x0000 0 0 0 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
 
 			local-mac-address = [00 00 00 00 00 00];
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 0e102a12b..db1737bf6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -280,6 +280,8 @@
 		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -541,7 +543,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index 6afbabc89..05489a31e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -330,6 +330,8 @@
 		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -585,7 +587,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
new file mode 100644
index 000000000..4a0799d63
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0	0x106>, /* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106>, /* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106>, /* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x146>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x141>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000..1b1999f3a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Mallow";
+	compatible = "toradex,verdin-imx8mm-nonwifi-mallow",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
new file mode 100644
index 000000000..2916145f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Mallow";
+	compatible = "toradex,verdin-imx8mm-wifi-mallow",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 54faf83cb..8a1b42b94 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -636,6 +636,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mm-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -647,7 +649,6 @@
 						<&clk IMX8MM_CLK_AUDIO_AHB>,
 						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
 						<&clk IMX8MM_SYS_PLL3>,
-						<&clk IMX8MM_VIDEO_PLL1>,
 						<&clk IMX8MM_AUDIO_PLL1>;
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
 							 <&clk IMX8MM_ARM_PLL_OUT>,
@@ -657,7 +658,6 @@
 							<400000000>,
 							<400000000>,
 							<750000000>,
-							<594000000>,
 							<393216000>;
 			};
 
@@ -1133,7 +1133,7 @@
 				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
 							 <&clk IMX8MM_SYS_PLL2_1000M>,
 							 <&clk IMX8MM_SYS_PLL1_800M>;
-				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				assigned-clock-rates = <24000000>, <500000000>, <200000000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
 				status = "disabled";
@@ -1151,12 +1151,8 @@
 				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
 					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
 				clock-names = "bus_clk", "sclk_mipi";
-				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
-						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
-							 <&clk IMX8MM_CLK_24M>;
-				assigned-clock-rates = <266000000>, <24000000>;
-				samsung,pll-clock-frequency = <24000000>;
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 16761975f..20018ee2c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -4,6 +4,12 @@
  */
 
 / {
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -74,6 +80,22 @@
 		enable-active-high;
 	};
 
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dmic";
+		simple-audio-card,format = "pdm";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
 	sound-wm8962 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8962";
@@ -221,6 +243,15 @@
 	};
 };
 
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -311,6 +342,13 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXC_PDM_CLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0	0xd6
+		>;
+	};
+
 	pinctrl_reg_usb_otg: reg-otggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 90073b165..2a64115ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include "imx8mn-overdrive.dtsi"
+
 / {
 	aliases {
 		rtc0 = &rtc;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 22a754d43..bbb07c650 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000..7675583a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&pgc_dispmix {
+	assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <500000000>, <200000000>;
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <12000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "syna,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
index 7acc5a960..11a1ba5bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -21,7 +21,6 @@
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
new file mode 100644
index 000000000..6f9b82958
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som-symphony.dts"
+
+/ {
+	model = "DimOnOff Gateway EVK board";
+	compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn",
+		     "fsl,imx8mn";
+
+	/*
+	 * U30 FPF2193 regulator.
+	 * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49).
+	 */
+	reg_disp_3v3: regulator-disp-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "Display 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio5 13 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+/* Disable Asynchronous Sample Rate Converter (audio) */
+&easrc {
+	status = "disabled";
+};
+
+&ecspi1 {
+	/* Resistive touch controller */
+	/delete-node/ touchscreen@0;
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	adc@48 {
+		compatible = "ti,ads7924";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adc>;
+		vref-supply = <&reg_disp_3v3>;
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			label = "Pot0";
+		};
+		channel@1 {
+			reg = <1>;
+			label = "Pot1";
+		};
+		channel@2 {
+			reg = <2>;
+			label = "Pot2";
+		};
+		channel@3 {
+			reg = <3>;
+			label = "Pot3";
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		reset-source; /* For watchdog. */
+	};
+
+	rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reset-source; /* For watchdog. */
+		interrupt-parent = <&gpio5>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */
+	};
+};
+
+&i2c3 {
+	touchscreen@38 {
+		status = "disabled";
+	};
+
+	codec@1a {
+		status = "disabled";
+	};
+
+	/* DS1337 RTC module */
+	rtc@68 {
+		status = "disabled";
+	};
+};
+
+&sai5 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0xc6
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x00000156
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x00000156
+		>;
+	};
+
+	pinctrl_adc: adcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x00000156
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x00000156
+			MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x00000156
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 0e60995a5..a0e13d332 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -71,8 +71,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_wlf>;
 		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
-		clock-names = "mclk";
 	};
 
 	sound-bt-sco {
@@ -223,12 +221,6 @@
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 
-		port {
-			typec1_dr_sw: endpoint {
-				remote-endpoint = <&usb1_drd_sw>;
-			};
-		};
-
 		typec1_con: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -240,6 +232,12 @@
 				     PDO_VAR(5000, 20000, 3000)>;
 			op-sink-microwatt = <15000000>;
 			self-powered;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
new file mode 100644
index 000000000..5d03fb893
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&gpu {
+	assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+			  <&clk IMX8MN_CLK_GPU_SHADER>,
+			  <&clk IMX8MN_CLK_GPU_AXI>,
+			  <&clk IMX8MN_CLK_GPU_AHB>,
+			  <&clk IMX8MN_GPU_PLL>;
+	assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_GPU_PLL_OUT>,
+				  <&clk IMX8MN_SYS_PLL1_800M>,
+				  <&clk IMX8MN_SYS_PLL1_800M>;
+	assigned-clock-rates = <600000000>,
+			       <600000000>,
+			       <800000000>,
+			       <400000000>,
+			       <1200000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
new file mode 100644
index 000000000..1b633bd1e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 DimOnOff
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "RVE gateway";
+	compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	crystal_duart_24m: crystal-duart-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-enter {
+			label = "enter";
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+		};
+
+		key-exit {
+			label = "exit";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ESC>;
+		};
+	};
+
+	lcd {
+		compatible = "hit,hd44780";
+		display-height-chars = <2>;
+		display-width-chars = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		data-gpios = <&gpio5  1 GPIO_ACTIVE_HIGH>,
+			     <&gpio1  6 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 14 GPIO_ACTIVE_HIGH>,
+			     <&gpio4 28 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 24 GPIO_ACTIVE_HIGH>,
+			     <&gpio5  2 GPIO_ACTIVE_HIGH>,
+			     <&gpio1 12 GPIO_ACTIVE_HIGH>,
+			     <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Bourns PEC12R rotary encoder, 24 steps. */
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rotary>;
+		gpios = <&gpio1  5 GPIO_ACTIVE_LOW>, /* A */
+			<&gpio3 21 GPIO_ACTIVE_LOW>; /* B */
+		linux,axis = <0>; /* REL_X */
+		rotary-encoder,encoding = "gray";
+		rotary-encoder,relative-axis;
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+
+	duart1: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3",
+				  "RADIO4", "RADIO_RESET", "TP12", "TP11";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+
+	/delete-node/ touchscreen@0;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	duart2: serial@0 {
+		compatible = "nxp,sc16is752";
+		reg = <0>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		spi-max-frequency = <4000000>;
+		clocks = <&crystal_duart_24m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER",
+				  "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1",
+				  "GPIO_EXT0", "TP13";
+		linux,rs485-enabled-at-boot-time;
+		rs485-rts-active-low;
+	};
+};
+
+/* Configure PWM pins in GPIO mode: */
+&gpio5 {
+	gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* Carrier board EEPROM */
+	eeprom_cb: eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3p3v>;
+	};
+
+	lm75: sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+		vs-supply = <&reg_3p3v>;
+	};
+
+	mcp7940: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	codec@1a {
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pcf8574_1: gpio@38 {
+		compatible = "nxp,pcf8574";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3",
+				  "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4",
+				  "LED_B_COMM4";
+	};
+
+	pcf8574_2: gpio@39 {
+		compatible = "nxp,pcf8574";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1",
+				  "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1",
+				  "TP16", "TP17";
+	};
+};
+
+/* Bluetooth */
+&uart2 {
+	status = "disabled";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD interface on expansion connector. */
+&usdhc2 {
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x13
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x13
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x13
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x13
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x13 /* SS0 */
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x13 /* SC16 IRQ */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1	0xc6 /* Enter */
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0xc6 /* Exit */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1		0x00000156 /* D0 */
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x00000156 /* D1 */
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x00000156 /* D2 */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x00000156 /* D3 */
+			MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24	0x00000156 /* D4 */
+			MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x00000156 /* D5 */
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00000156 /* D6 */
+			MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25	0x00000156 /* D7 */
+			MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23	0x00000156 /* E */
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x00000156 /* RS */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x00000156 /* R/W */
+		>;
+	};
+
+	pinctrl_rotary: rotarygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x00000156 /* A */
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x00000156 /* B */
+		>;
+	};
+
+	/* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000..29235e390
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
index 3f1e49bfe..c07d59147 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
 	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 391ca5516..fb24b9aa1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -219,6 +219,11 @@
 	};
 };
 
+&mipi_dsi {
+	vddcore-supply = <&ldo4_reg>;
+	vddio-supply = <&ldo3_reg>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index a7a57442c..a6b94d195 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	/* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+	reg_per_3v3: regulator-peripheral-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "per_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &ethphy {
@@ -79,6 +88,7 @@
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		#gpio-cells = <2>;
 		wakeup-source;
+		vcc-supply = <&reg_per_3v3>;
 
 		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
 		usb3-sata-sel-hog {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index b8946edf3..b36430786 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -31,6 +31,14 @@
 		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	reg_3v3_fixed: regulator-3v3-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &A53_0 {
@@ -234,6 +242,7 @@
 		compatible = "atmel,24c04";
 		reg = <0x52>;
 		pagesize = <16>;
+		vcc-supply = <&reg_3v3_fixed>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 08746fb82..0b1fa04f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -312,6 +312,8 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		adc {
 			compatible = "gw,gsc-adc";
@@ -583,7 +585,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 1bb1d0c1b..136e75c51 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -637,6 +637,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mn-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index acd265d8b..a08057410 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart2;
 	};
 
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	connector {
 		compatible = "usb-c-connector";
 		label = "USB-C";
@@ -49,6 +55,12 @@
 		};
 	};
 
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <1>;
+		#sound-dai-cells = <0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -82,6 +94,17 @@
 		};
 	};
 
+	bridge-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -112,12 +135,6 @@
 		};
 	};
 
-	pcie0_refclk: clock-pcie {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
 	reg_audio: regulator-wm8962 {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -147,6 +164,37 @@
 		enable-active-high;
 	};
 
+	sound-adv7535 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-adv7535";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+
+	sound-dmic {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-pdm";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+
+		dailink_master: simple-audio-card,cpu {
+			sound-dai = <&micfil>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&dmic_codec>;
+		};
+	};
+
 	sound-wm8962 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8962";
@@ -174,6 +222,11 @@
 	};
 };
 
+&audio_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>;
+	assigned-clock-rates = <393216000>, <135475200>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -181,7 +234,7 @@
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;
@@ -246,6 +299,42 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
+	pcieclk: clock-generator@68 {
+		compatible = "renesas,9fgv0241";
+		reg = <0x68>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c3 {
@@ -364,6 +453,34 @@
 	};
 };
 
+&lcdif1 {
+	status = "okay";
+};
+
+&micfil {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdm>;
+	assigned-clocks = <&clk IMX8MP_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -372,8 +489,9 @@
 };
 
 &pcie_phy {
+	fsl,clkreq-unsupported;
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
-	clocks = <&pcie0_refclk>;
+	clocks = <&pcieclk 1>;
 	clock-names = "ref";
 	status = "okay";
 };
@@ -389,6 +507,16 @@
 	status = "okay";
 };
 
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -545,6 +673,13 @@
 		>;
 	};
 
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK		0xd6
+			MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00	0xd6
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
@@ -561,6 +696,14 @@
 		>;
 	};
 
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC	0xd6
+		>;
+	};
+
 	pinctrl_tpm: tpmgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index 13674dc64..b5ce7b14b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -121,7 +121,7 @@
 	flash@0 {	/* W25Q128JVEI */
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-max-frequency = <40000000>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 	};
@@ -362,6 +362,8 @@
 			};
 
 			buck2: BUCK2 {	/* VDD_ARM */
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-ramp-delay = <3125>;
@@ -484,7 +486,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usb3_phy0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index 267ceffc0..2c19766eb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -75,7 +75,7 @@
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
index 0b0c95432..b11d694b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -63,6 +63,50 @@
 		regulator-always-on;
 	};
 
+	reg_csi1_1v8: regulator-csi1-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI1_VDD1V8";
+		gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi1_3v3: regulator-csi1-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI1_VDD3V3";
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
+	reg_csi2_1v8: regulator-csi2-vdd1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_1v8>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "CSI2_VDD1V8";
+		gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_baseboard_vdd3v3>;
+	};
+
+	reg_csi2_3v3: regulator-csi2-vdd3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_csi2_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "CSI2_VDD3V3";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd5v0>;
+	};
+
 	regulator-vbus-usb20 {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -220,7 +264,7 @@
 		reg = <0x52>;
 		pagesize = <16>;
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
 
 		/* MACs stored in ASCII */
 		ethmac1: mac-address@0 {
@@ -413,6 +457,18 @@
 		>;
 	};
 
+	pinctrl_reg_csi2_1v8: regcsi21v8grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x19
+		>;
+	};
+
+	pinctrl_reg_csi2_3v3: regcsi23v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x19
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
index bc312aa1b..91094c227 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -6,6 +6,8 @@
 
 #include "imx8mp.dtsi"
 
+#include <dt-bindings/leds/common.h>
+
 / {
 	model = "Polyhex i.MX8MPlus Debix SOM A";
 	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
@@ -20,6 +22,20 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
 };
 
 &A53_0 {
@@ -203,6 +219,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x19
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index e9fb5f7f3..3b1c94086 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -186,9 +186,9 @@
 
 &pcie_phy {
 	clock-names = "ref";
-	clocks = <&clk IMX8MP_SYS_PLL2_100M>;
+	clocks = <&hsio_blk_ctrl>;
 	fsl,clkreq-unsupported;
-	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index 31d85d587..b749e28e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -35,33 +35,6 @@
 		clock-frequency = <25000000>;
 	};
 
-	connector {
-		compatible = "usb-c-connector";
-		label = "USB-C";
-		data-role = "dual";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				usb_c_0_hs_ep: endpoint {
-					remote-endpoint = <&dwc3_0_hs_ep>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				usb_c_0_ss_ep: endpoint {
-					remote-endpoint = <&ptn5150_in_ep>;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -202,33 +175,19 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ptn5150>;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+				port {
 
-					port@0 {
-						reg = <0>;
-
-						ptn5150_in_ep: endpoint {
-							remote-endpoint = <&usb_c_0_ss_ep>;
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-
-						ptn5150_out_ep: endpoint {
-							remote-endpoint = <&dwc3_0_ss_ep>;
-						};
+					ptn5150_out_ep: endpoint {
+						remote-endpoint = <&dwc3_0_ep>;
 					};
 				};
 			};
 
 			power-sensor@40 {
-			    compatible = "ti,ina238";
-			    reg = <0x40>;
-			    shunt-resistor = <20000>;	/* 0.02 R */
-			    ti,shunt-gain = <1>;	/* Drop cca. 40mV */
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <20000>;	/* 0.02 R */
+				ti,shunt-gain = <1>;	/* Drop cca. 40mV */
 			};
 
 			eeprom_board: eeprom@54 {
@@ -253,10 +212,6 @@
 	};
 };
 
-&ethphy0g {
-	reg = <7>;
-};
-
 &fec {	/* Second ethernet */
 	pinctrl-0 = <&pinctrl_fec_rgmii>;
 	phy-handle = <&ethphypdk>;
@@ -310,16 +265,7 @@
 	usb-role-switch;
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dwc3_0_hs_ep: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&usb_c_0_hs_ep>;
-		};
-
-		dwc3_0_ss_ep: endpoint@1 {
-			reg = <1>;
+		dwc3_0_ep: endpoint {
 			remote-endpoint = <&ptn5150_out_ep>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index cb1953d14..43f1d45cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -25,9 +25,7 @@
 
 	reg_eth_vio: regulator-eth-vio {
 		compatible = "regulator-fixed";
-		gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pinctrl_enet_vio>;
-		pinctrl-names = "default";
+		gpio = <&ioexp 2 GPIO_ACTIVE_LOW>;
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
@@ -57,6 +55,11 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VDD_3P3V_AWO";
 	};
+
+	wlan_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&ioexp 1 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &A53_0 {
@@ -112,7 +115,7 @@
 			reg = <0>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
-			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
 			/* Non-default PHY population option. */
 			status = "disabled";
 		};
@@ -128,7 +131,7 @@
 			reg = <5>;
 			reset-assert-us = <1000>;
 			reset-deassert-us = <1000>;
-			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&ioexp 4 GPIO_ACTIVE_LOW>;
 			/* Default PHY population option. */
 			status = "okay";
 		};
@@ -252,7 +255,7 @@
 				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
 		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
-		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 
 		ports {
@@ -293,6 +296,8 @@
 			};
 
 			buck2: BUCK2 {	/* VDD_ARM */
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-ramp-delay = <3125>;
@@ -348,8 +353,9 @@
 	};
 
 	adc@48 {
-		compatible = "ti,tla2024";
+		compatible = "ti,ads1015";
 		reg = <0x48>;
+		interrupts-extended = <&ioexp 7 IRQ_TYPE_EDGE_FALLING>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -396,24 +402,54 @@
 	};
 
 	eeprom0: eeprom@50 {	/* EEPROM with EQoS MAC address */
-		compatible = "atmel,24c02";
-		pagesize = <16>;
+		compatible = "atmel,24c32";	/* M24C32-D */
+		pagesize = <32>;
 		reg = <0x50>;
 	};
 
 	rv3032: rtc@51 {
 		compatible = "microcrystal,rv3032";
 		reg = <0x51>;
-		interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&ioexp 3 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 
 	eeprom1: eeprom@53 {	/* EEPROM with FEC MAC address */
-		compatible = "atmel,24c02";
-		pagesize = <16>;
+		compatible = "atmel,24c32";	/* M24C32-D */
+		pagesize = <32>;
 		reg = <0x53>;
 	};
+
+	eeprom0wl: eeprom@58 {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x50 */
+		pagesize = <32>;
+		reg = <0x58>;
+	};
+
+	eeprom1wl: eeprom@5b {
+		compatible = "atmel,24c32d-wl";	/* M24C32-D WL page of 0x53 */
+		pagesize = <32>;
+		reg = <0x5b>;
+	};
+
+	ioexp: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ioexp>;
+		wakeup-source;
+
+		gpio-line-names =
+			"BT_REG_EN", "WL_REG_EN", "VIO_SWITCHED_#EN", "RTC_#INT",
+			"ENET_QOS_#RST", "RGB_OSZ_ENABLE", "USB1_ID", "ADC_ALTER_RDY",
+			"DHCOM-W", "DHCOM-V", "DHCOM-U", "DHCOM-T",
+			"BT_HOST_WAKE", "BT_DEV_WAKE", "", "";
+	};
 };
 
 &i2c4 {
@@ -463,6 +499,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
+	wakeup-source;
 };
 
 &uart2 {
@@ -484,10 +521,8 @@
 	assigned-clock-rates = <80000000>;
 
 	bluetooth {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart2_bt>;
 		compatible = "cypress,cyw4373a0-bt";
-		shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>;
 		max-speed = <4000000>;
 	};
 };
@@ -514,8 +549,6 @@
 };
 
 &usb_dwc3_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb0_vbus>;
 	dr_mode = "otg";
 	status = "okay";
 };
@@ -541,6 +574,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	mmc-pwrseq = <&wlan_pwrseq>;
 	vmmc-supply = <&buck4>;
 	bus-width = <4>;
 	non-removable;
@@ -559,7 +593,6 @@
 		 * connected to the SoC, but can be connected on to
 		 * SoC pin on the carrier board.
 		 */
-		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -601,8 +634,9 @@
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT1 */
-		     &pinctrl_dhcom_int>;
+		     &pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+		     &pinctrl_dhcom_s &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
 	pinctrl_dhcom_a: dhcom-a-grp {
@@ -689,6 +723,55 @@
 		>;
 	};
 
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <
+			/* CSIx_MCLK */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x2
+		>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <
+			/* CSI2_D3- */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x2
+		>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <
+			/* CSI2_D3+ */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x2
+		>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <
+			/* CSI2_D2- */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x2
+		>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <
+			/* CSI2_D2+ */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x2
+		>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <
+			/* CSI2_D1- */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x2
+		>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <
+			/* CSI2_D1+ */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x2
+		>;
+	};
+
 	pinctrl_dhcom_int: dhcom-int-grp {
 		fsl,pins = <
 			/* INT_HIGHEST_PRIO */
@@ -762,16 +845,8 @@
 		>;
 	};
 
-	pinctrl_enet_vio: dhcom-enet-vio-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
-		>;
-	};
-
 	pinctrl_ethphy0: dhcom-ethphy0-grp {
 		fsl,pins = <
-			/* ENET_QOS_#RST Reset */
-			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
 			/* ENET_QOS_#INT Interrupt */
 			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
 		>;
@@ -897,6 +972,13 @@
 		>;
 	};
 
+	pinctrl_ioexp: dhcom-ioexp-grp {
+		fsl,pins = <
+			/* #GPIO_EXP_INT */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
+		>;
+	};
+
 	pinctrl_pmic: dhcom-pmic-grp {
 		fsl,pins = <
 			/* PMIC_nINT */
@@ -910,13 +992,6 @@
 		>;
 	};
 
-	pinctrl_rtc: dhcom-rtc-grp {
-		fsl,pins = <
-			/* RTC_#INT Interrupt */
-			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
-		>;
-	};
-
 	pinctrl_tc9595: dhcom-tc9595-grp {
 		fsl,pins = <
 			/* RESET_DSIBRIDGE */
@@ -962,13 +1037,6 @@
 		>;
 	};
 
-	pinctrl_uart2_bt: dhcom-uart2-bt-grp {
-		fsl,pins = <
-			/* BT_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
-		>;
-	};
-
 	pinctrl_uart3: dhcom-uart3-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x49
@@ -985,12 +1053,6 @@
 		>;
 	};
 
-	pinctrl_usb0_vbus: dhcom-usb0-grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID		0x0
-		>;
-	};
-
 	pinctrl_usb1_vbus: dhcom-usb1-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x6
@@ -1006,8 +1068,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
@@ -1019,8 +1079,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
@@ -1032,8 +1090,6 @@
 			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
 			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
 			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
-			/* WL_REG_EN */
-			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index cc9d468b4..9beba8d6a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -23,7 +23,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -107,6 +107,13 @@
 		enable-active-high;
 	};
 
+	reg_vext_3v3: regulator-vext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "wm8960-audio";
@@ -137,6 +144,28 @@
 		};
 
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_vdev0vring0: vdev0vring0@942f0000 {
+			reg = <0 0x942f0000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0vring1: vdev0vring1@942f8000 {
+			reg = <0 0x942f8000 0 0x8000>;
+			no-map;
+		};
+
+		dsp_vdev0buffer: vdev0buffer@94300000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x94300000 0 0x100000>;
+			no-map;
+		};
+	};
 };
 
 &flexspi {
@@ -342,7 +371,7 @@
 				regulator-always-on;
 			};
 
-			BUCK5 {
+			reg_buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1650000>;
 				regulator-max-microvolt = <1950000>;
@@ -393,14 +422,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&reg_buck5>;
+		dvdd-supply = <&reg_buck5>;
+		pvdd-supply = <&reg_buck5>;
+		a2vdd-supply = <&reg_buck5>;
+		v3p3-supply = <&reg_vext_3v3>;
+		v1p2-supply = <&reg_buck5>;
 
 		ports {
 			#address-cells = <1>;
@@ -409,7 +440,7 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
@@ -417,7 +448,7 @@
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -502,7 +533,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index e4215c83e..da4b1807c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -57,8 +57,8 @@
 		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
 		#sound-dai-cells = <0>;
 
-		VDDA-supply  = <&reg_vcc_3v3_audio>;
-		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDA-supply = <&reg_vcc_3v3_audio>;
+		VDDD-supply = <&reg_vcc_1v8_audio>;
 		VDDIO-supply = <&reg_vcc_1v8_audio>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 1e14c4cd3..c8640cac3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -19,6 +19,36 @@
 		stdout-path = &uart1;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can1-stby";
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		gpio = <&gpio3 21 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "can2-stby";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -57,6 +87,21 @@
 	};
 };
 
+/* CAN FD */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
@@ -101,6 +146,47 @@
 	status = "okay";
 };
 
+/* USB1 Host mode Type-A */
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB */
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* RS232/RS485 */
+&uart2 {
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
 /* SD-Card */
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
@@ -115,6 +201,33 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
+		"PMIC_SD_VSEL", "", "", "", "", "",
+		"", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_SD2_CD_B", "", "", "",
+		"", "", "", "SD2_RESET_B";
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "nCAN1_EN", "nCAN2_EN";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN";
+};
+
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
@@ -136,6 +249,32 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20	0x154
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x154
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
@@ -163,6 +302,21 @@
 		>;
 	};
 
+	pinctrl_usb1_vbus: usb1vbusgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12     0x10
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS	0x140
+		>;
+	};
+
 	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index d8df97060..c976c3b6c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -199,6 +199,19 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "X_PMIC_WDOG_B", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "X_nETHPHY_INT";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"", "", "X_PMIC_IRQ_B";
+};
+
 &iomuxc {
 	pinctrl_fec: fecgrp {
 		fsl,pins = <
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
new file mode 100644
index 000000000..59813ef8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "imx8mp.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		/* some of this aliases like backlight0, ethernetX and switch0
+		 * are needed for the bootloader.
+		 */
+		backlight0 = &backlight;
+		ethernet0 = &eqos;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+		switch0 = &switch;
+	};
+
+	/*
+	 * Backlight is present only on some of boards, so it is disabled by
+	 * default.
+	 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 20000 0>;
+		power-supply = <&reg_24v>;
+		enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "D1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_1v2: regulator-1v2 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_p>;
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v_s>;
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * This regulator will provide power as long as possible even if
+	 * undervoltage is detected.
+	 */
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_P";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/*
+	 * This regulator will be automatically shutdown if undervoltage is
+	 * detected.
+	 */
+	reg_5v_s: regulator-5v-s {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_S";
+		vin-supply = <&reg_24v>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v: regulator-24v {
+		compatible = "regulator-fixed";
+		regulator-name = "24V";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can2rs: regulator-can2rs {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN2RS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2rs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_canrs: regulator-canrs {
+		compatible = "regulator-fixed";
+		regulator-name = "CANRS";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_canrs>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm4 0 20000 0>;
+		regulator-name = "VCOM";
+		vin-supply = <&reg_5v_s>;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+		status = "disabled";
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		vin-supply = <&reg_vdd_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_vdd_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_canrs>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2rs>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
+		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram_1v1: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs_1v8: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda_1v8: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd2: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&reg_5v_p>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063tp";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <380000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9893";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_switch>;
+		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		reg = <0x5f>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				phy-mode = "internal";
+				label = "lan1";
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				phy-mode = "internal";
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "cpu";
+				ethernet = <&eqos>;
+				phy-mode = "rgmii";
+				/* 2ns RX delay is implemented on PCB */
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <0>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24			0x0100
+		>;
+	};
+
+	pinctrl_can2rs: can2rsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22			0x154
+		>;
+	};
+
+	pinctrl_canrs: canrsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21			0x154
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO			0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13			0x40
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX				0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX				0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX				0x154
+			MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX				0x154
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05			0x19
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06			0x19
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07			0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA				0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL				0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03			0x41
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04			0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT			0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT			0x116
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: regvsd3v3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31			0x41
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00			0x41
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01			0x41
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28			0x41
+			/* CTP_RST */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29			0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX			0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX			0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS			0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX			0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX			0x14f
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK			0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD			0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0			0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1			0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2			0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3			0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12			0x1c4
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK			0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD			0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0			0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1			0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2			0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3			0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4			0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5			0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6			0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7			0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
new file mode 100644
index 000000000..c1ca69da3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - HDMI";
+	compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp";
+};
+
+&iomuxc {
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL		0x1c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA		0x1c3
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD			0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
new file mode 100644
index 000000000..ccbd3abed
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - LT6";
+	compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp";
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3600000>;
+	regulator-max-microvolt = <3600000>;
+	voltage-table = <3600000 26>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK			0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI			0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO			0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09			0x40
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25			0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
new file mode 100644
index 000000000..3c2efdc59
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include "imx8mp-skov-reva.dtsi"
+
+/ {
+	model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1";
+	compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp";
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_tft_vcom>;
+
+		port {
+			in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		vcc-supply = <&reg_vdd_3v3>;
+		iovcc-supply = <&reg_vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
+	assigned-clock-rates = <482300000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&in_lvds0>;
+			};
+		};
+	};
+};
+
+&media_blk_ctrl {
+	/* currently it is not possible to let display clocks confugure
+	 * automatically, so we need to set them manually
+	 */
+	assigned-clock-rates = <500000000>, <200000000>, <0>,
+		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
+		<68900000>,
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
+		<964600000>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL				0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA				0x400001c2
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
new file mode 100644
index 000000000..5058cd940
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "auo,g133han01";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dual-lvds-odd-pixels;
+
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dual-lvds-even-pixels;
+
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&ldb_lvds_ch1>;
+			};
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+				 <&clk IMX8MP_VIDEO_PLL1>;
+	assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <988400000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+
+		port@2 {
+			ldb_lvds_ch1: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4240e20d3..86d3da36e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -15,6 +15,7 @@
 / {
 	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
 	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &uart4;
@@ -55,6 +56,21 @@
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -168,6 +184,13 @@
 		enable-active-high;
 	};
 
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	reg_vcc_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -464,7 +487,7 @@
 		clock-names = "mclk";
 		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
 		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
-		iov-supply = <&reg_vcc_3v3>;
+		iov-supply = <&reg_vcc_1v8>;
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
@@ -602,7 +625,6 @@
 &usb3_1 {
 	fsl,disable-port-power-control;
 	fsl,permanently-attached;
-	dr_mode = "host";
 	status = "okay";
 };
 
@@ -626,13 +648,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
index c531564c7..0e8d0f3c7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -8,6 +8,21 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -78,7 +93,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -133,13 +147,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index f3bab22d5..f24b14744 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -8,6 +8,22 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -83,8 +99,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -113,7 +136,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -162,7 +184,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -176,13 +197,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
@@ -286,6 +304,7 @@
 			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
 			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
 			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
index 68c62def4..f5491a608 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -8,6 +8,22 @@
 #include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	led-controller {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -95,8 +111,15 @@
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		   <&gpio1 10 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	tpm@1 {
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+		reg = <0x1>;
+		spi-max-frequency = <36000000>;
+	};
 };
 
 &gpio4 {
@@ -125,7 +148,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 };
 
@@ -181,7 +203,6 @@
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 
@@ -195,13 +216,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		type = "micro";
-		label = "otg";
-		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
new file mode 100644
index 000000000..270a9114d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mp-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mp-gw74xx", "fsl,imx8mp";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi_0_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&isi_0 {
+	status = "okay";
+};
+
+&mipi_csi_0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi_0_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index faa370a58..cae586cd4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -35,6 +35,21 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -181,9 +196,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
 		spi-max-frequency = <36000000>;
 	};
@@ -461,7 +474,6 @@
 		st,drdy-int-pin = <1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "INT1";
 	};
 
 	switch: switch@5f {
@@ -512,7 +524,6 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
 
@@ -696,13 +707,10 @@
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon1>;
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "Type-C";
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
new file mode 100644
index 000000000..8482393f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@1 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm_irq>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+/* EEPROM on Mallow */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+/* Verdin ETH_1 */
+&eqos {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* Temperature sensor on Mallow */
+&hwmon_temp {
+	compatible = "ti,tmp1075";
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106>, /* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106>, /* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106>, /* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106>; /* SODIMM 58 */
+	};
+
+	pinctrl_tpm_cs: tpmcsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x82>; /* SODIMM 64 */
+	};
+
+	pinctrl_tpm_irq: tpmirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x16>; /* SODIMM 66 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000..6a536a496
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-mallow",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
new file mode 100644
index 000000000..08b7aef3f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Mallow Board";
+	compatible = "toradex,verdin-imx8mp-wifi-mallow",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index e9e4fcb56..c3305f0d4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -45,6 +45,23 @@
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -184,7 +201,6 @@
 &eqos {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_module_eth1phy>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
 	snps,force_thresh_dma_mode;
@@ -836,15 +852,10 @@
 	srp-disable;
 	usb-role-switch;
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-		label = "Type-C";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb_1_id>;
-		self-powered;
-		type = "micro";
-		vbus-supply = <&reg_usb1_vbus>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 4b50920ac..39a550c1c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -202,6 +202,60 @@
 		clock-output-names = "clk_ext4";
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ca_funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ca_funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				ca_funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -210,6 +264,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -368,59 +423,6 @@
 			};
 		};
 
-		funnel {
-			/*
-			 * non-configurable funnel don't show up on the AMBA
-			 * bus.  As such no need to add "arm,primecell".
-			 */
-			compatible = "arm,coresight-static-funnel";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					ca_funnel_in_port0: endpoint {
-						remote-endpoint = <&etm0_out_port>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					ca_funnel_in_port1: endpoint {
-						remote-endpoint = <&etm1_out_port>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					ca_funnel_in_port2: endpoint {
-						remote-endpoint = <&etm2_out_port>;
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-
-					ca_funnel_in_port3: endpoint {
-						remote-endpoint = <&etm3_out_port>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					ca_funnel_out_port0: endpoint {
-						remote-endpoint = <&hugo_funnel_in_port0>;
-					};
-				};
-			};
-		};
-
 		funnel@28c03000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x28c03000 0x1000>;
@@ -725,6 +727,8 @@
 			clk: clock-controller@30380000 {
 				compatible = "fsl,imx8mp-ccm";
 				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
 					 <&clk_ext3>, <&clk_ext4>;
@@ -792,8 +796,8 @@
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
 						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
 								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
-						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
-									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
 						assigned-clock-rates = <400000000>,
 								       <600000000>;
 					};
@@ -886,6 +890,15 @@
 						clocks = <&clk IMX8MP_CLK_ML_AXI>,
 							 <&clk IMX8MP_CLK_ML_AHB>,
 							 <&clk IMX8MP_CLK_NPU_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>,
+								  <&clk IMX8MP_CLK_ML_AXI>,
+								  <&clk IMX8MP_CLK_ML_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>,
+								       <800000000>,
+								       <300000000>;
 					};
 				};
 			};
@@ -1459,6 +1472,47 @@
 					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 					status = "disabled";
 				};
+
+				easrc: easrc@30c90000 {
+					compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc";
+					reg = <0x30c90000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30ca0000 {
+					compatible = "fsl,imx8mp-micfil";
+					reg = <0x30ca0000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_SEL>,
+						 <&clk IMX8MP_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MP_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MP_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					status = "disabled";
+				};
+
 			};
 
 			sdma3: dma-controller@30e00000 {
@@ -1766,7 +1820,7 @@
 					compatible = "fsl,imx8mp-ldb";
 					reg = <0x5c 0x4>, <0x128 0x4>;
 					reg-names = "ldb", "lvds";
-					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>;
 					clock-names = "ldb";
 					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
 					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
@@ -1970,6 +2024,18 @@
 			interconnect-names = "g1", "g2", "vc8000e";
 		};
 
+		npu: npu@38500000 {
+			compatible = "vivante,gc";
+			reg = <0x38500000 0x200000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_NPU_ROOT>,
+				 <&clk IMX8MP_CLK_ML_AXI>,
+				 <&clk IMX8MP_CLK_ML_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			power-domains = <&pgc_mlmix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index 6376417e9..d8cf1f27c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -65,7 +65,7 @@
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 138a4d36a..ffb5fe616 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -381,7 +381,7 @@
 		gpio-hog;
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		input;
-		lane-mapping = "pmic-5v";
+		line-name = "pmic-5v";
 	};
 };
 
@@ -1001,7 +1001,7 @@
 	};
 
 	regulator@3e {
-		compatible = "tps65132";
+		compatible = "ti,tps65132";
 		reg = <0x3e>;
 
 		reg_lcd_avdd: outp {
@@ -1154,15 +1154,12 @@
 		pinctrl-0 = <&pinctrl_charger_in>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		phys = <&usb3_phy0>;
 		ti,battery-regulation-voltage = <4208000>; /* uV */
 		ti,termination-current = <128000>;  /* uA */
 		ti,precharge-current = <128000>; /* uA */
 		ti,minimum-sys-voltage = <3700000>; /* uV */
 		ti,boost-voltage = <5000000>; /* uV */
 		ti,boost-max-current = <1500000>; /* uA */
-		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
-		ti,vinmin-threshold = <3900000>; /* uV */
 		monitored-battery = <&bat>;
 		power-supplies = <&typec_pd>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index 8614c18b5..767819cce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -142,7 +142,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c1a: i2c1@0 {
+		i2c1a: i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -159,7 +159,7 @@
 			};
 		};
 
-		i2c1b: i2c1@1 {
+		i2c1b: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -176,7 +176,7 @@
 			};
 		};
 
-		i2c1c: i2c1@2 {
+		i2c1c: i2c@2 {
 			reg = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -193,7 +193,7 @@
 			};
 		};
 
-		i2c1d: i2c1@3 {
+		i2c1d: i2c@3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -222,7 +222,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c4@0 {
+		i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -257,14 +257,14 @@
 			};
 		};
 
-		ddc_i2c_bus: i2c4@1 {
+		ddc_i2c_bus: i2c@1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <100000>;
 		};
 
-		i2c4@3 {
+		i2c@3 {
 			reg = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index a3b9d615a..e34045d10 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -39,7 +39,7 @@
 
 	fan: gpio-fan {
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 8600 1>;
+		gpio-fan,speed-map = <0 0>, <8600 1>;
 		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		#cooling-cells = <2>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
index 89cbec5c4..ec89b5ade 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -67,12 +67,12 @@
 		compatible = "rohm,bd71837";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
 		clocks = <&pmic_osc>;
 		clock-names = "osc";
 		clock-output-names = "pmic_clk";
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "irq";
 
 		regulators {
 			buck1: BUCK1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index 6e6182709..eaa9d0c0f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -107,7 +107,7 @@
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi_reg_on>;
-		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso
new file mode 100644
index 000000000..306977d6b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtso
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2019-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi_lvds_bridge {
+	status = "okay";
+};
+
+&expander0 {
+	dsi-mux-oe-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "DSI_MUX_OE#";
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+       status = "okay";
+};
+
+&panel {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
index 0d8def276..b302daca4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -11,6 +11,7 @@
 / {
 	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
 	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+	chassis-type = "embedded";
 
 	aliases {
 		eeprom0 = &eeprom3;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index cb777b47b..0c960efd9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -15,7 +15,7 @@
 		stdout-path = &uart1;
 	};
 
-	mdio0: bitbang-mdio {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 052ba9baa..c6dc3ba0d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -225,6 +225,59 @@
 		};
 	};
 
+	funnel {
+		/*
+		 * non-configurable funnel don't show up on the AMBA
+		 * bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-funnel";
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ca_funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ca_funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				ca_funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				ca_funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -394,59 +447,6 @@
 			};
 		};
 
-		funnel {
-			/*
-			 * non-configurable funnel don't show up on the AMBA
-			 * bus.  As such no need to add "arm,primecell".
-			 */
-			compatible = "arm,coresight-static-funnel";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					ca_funnel_in_port0: endpoint {
-						remote-endpoint = <&etm0_out_port>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					ca_funnel_in_port1: endpoint {
-						remote-endpoint = <&etm1_out_port>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					ca_funnel_in_port2: endpoint {
-						remote-endpoint = <&etm2_out_port>;
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-
-					ca_funnel_in_port3: endpoint {
-						remote-endpoint = <&etm3_out_port>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					ca_funnel_out_port0: endpoint {
-						remote-endpoint = <&hugo_funnel_in_port0>;
-					};
-				};
-			};
-		};
-
 		funnel@28c03000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0x28c03000 0x1000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
index 1c6af9f54..4d6427fbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -21,7 +21,6 @@
  * this PHY model. Use delay on MAC side instead.
  */
 &fec1 {
-	fsl,rgmii_txc_dly;
 	phy-mode = "rgmii-rxid";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 0b34cc225..6d50838ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -47,6 +47,18 @@
 	status = "okay";
 };
 
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -118,6 +130,20 @@
 		>;
 	};
 
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QM_UART0_RTS_B_DMA_UART2_RX				0x06000020
+			IMX8QM_UART0_CTS_B_DMA_UART2_TX				0x06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QM_M41_GPIO0_00_DMA_UART3_RX			0x06000020
+			IMX8QM_M41_GPIO0_01_DMA_UART3_TX			0x06000020
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
index e9b198c13..cd96f9f75 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -44,38 +44,124 @@
 	};
 };
 
+&edma2 {
+	reg = <0x5a1f0000 0x170000>;
+	#dma-cells = <3>;
+	dma-channels = <22>;
+	dma-channel-mask = <0xf00>;
+	interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* unused */
+		     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+	power-domains = <&pd IMX_SC_R_DMA_0_CH0>,
+			<&pd IMX_SC_R_DMA_0_CH1>,
+			<&pd IMX_SC_R_DMA_0_CH2>,
+			<&pd IMX_SC_R_DMA_0_CH3>,
+			<&pd IMX_SC_R_DMA_0_CH4>,
+			<&pd IMX_SC_R_DMA_0_CH5>,
+			<&pd IMX_SC_R_DMA_0_CH6>,
+			<&pd IMX_SC_R_DMA_0_CH7>,
+			<&pd IMX_SC_R_DMA_0_CH8>,
+			<&pd IMX_SC_R_DMA_0_CH9>,
+			<&pd IMX_SC_R_DMA_0_CH10>,
+			<&pd IMX_SC_R_DMA_0_CH11>,
+			<&pd IMX_SC_R_DMA_0_CH12>,
+			<&pd IMX_SC_R_DMA_0_CH13>,
+			<&pd IMX_SC_R_DMA_0_CH14>,
+			<&pd IMX_SC_R_DMA_0_CH15>,
+			<&pd IMX_SC_R_DMA_0_CH16>,
+			<&pd IMX_SC_R_DMA_0_CH17>,
+			<&pd IMX_SC_R_DMA_0_CH18>,
+			<&pd IMX_SC_R_DMA_0_CH19>,
+			<&pd IMX_SC_R_DMA_0_CH20>,
+			<&pd IMX_SC_R_DMA_0_CH21>;
+	status = "okay";
+};
+
+/* It is eDMA1 in 8QM RM, but 8QXP it is eDMA3 */
+&edma3 {
+	reg = <0x5a9f0000 0x210000>;
+	dma-channels = <10>;
+	interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+	power-domains = <&pd IMX_SC_R_DMA_1_CH0>,
+			<&pd IMX_SC_R_DMA_1_CH1>,
+			<&pd IMX_SC_R_DMA_1_CH2>,
+			<&pd IMX_SC_R_DMA_1_CH3>,
+			<&pd IMX_SC_R_DMA_1_CH4>,
+			<&pd IMX_SC_R_DMA_1_CH5>,
+			<&pd IMX_SC_R_DMA_1_CH6>,
+			<&pd IMX_SC_R_DMA_1_CH7>,
+			<&pd IMX_SC_R_DMA_1_CH8>,
+			<&pd IMX_SC_R_DMA_1_CH9>;
+};
+
 &flexcan1 {
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &lpuart0 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart1 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart2 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 17 0 0>, <&edma2 16 0 1>;
+	dma-names = "rx","tx";
 };
 
 &lpuart3 {
 	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+	dmas = <&edma2 19 0 0>, <&edma2 18 0 1>;
+	dma-names = "rx","tx";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 7924b0969..8360bb851 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -31,7 +31,7 @@
 	};
 
 	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_typec_mux>;
 		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
@@ -50,6 +50,10 @@
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -152,12 +156,6 @@
 		interrupt-parent = <&lsio_gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
 		usb_con1: connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
@@ -169,8 +167,17 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
 				port@1 {
 					reg = <1>;
+
 					typec_con_ss: endpoint {
 						remote-endpoint = <&usb3_data_ss>;
 					};
@@ -187,6 +194,18 @@
 	status = "okay";
 };
 
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
 &mu_m0 {
 	status = "okay";
 };
@@ -340,6 +359,20 @@
 		>;
 	};
 
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QXP_UART2_TX_ADMA_UART2_TX          0x06000020
+			IMX8QXP_UART2_RX_ADMA_UART2_RX          0x06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX       0x06000020
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX       0x06000020
+		>;
+	};
+
 	pinctrl_typec: typecgrp {
 		fsl,pins = <
 			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
new file mode 100644
index 000000000..7894a3ab2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+};
+
+/delete-node/ &mu2_m0;
+/delete-node/ &vpu_core2;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index c80c85a4b..958267b33 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -48,7 +48,6 @@
 		serial3 = &lpuart3;
 		vpu-core0 = &vpu_core0;
 		vpu-core1 = &vpu_core1;
-		vpu-core2 = &vpu_core2;
 	};
 
 	cpus {
@@ -184,6 +183,7 @@
 		dsp_reserved: dsp@92400000 {
 			reg = <0 0x92400000 0 0x2000000>;
 			no-map;
+			status = "disabled";
 		};
 
 		encoder_rpc: encoder-rpc@94400000 {
@@ -317,6 +317,7 @@
 };
 
 #include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-vpu.dtsi"
 #include "imx8qxp-ss-adma.dtsi"
 #include "imx8qxp-ss-conn.dtsi"
 #include "imx8qxp-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 8a6596d5a..c4a0082f3 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -360,7 +360,7 @@
 				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
 					 <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
-				clock-names = "fspi", "fspi_en";
+				clock-names = "fspi_en", "fspi";
 				assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
 				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
 				status = "disabled";
@@ -483,12 +483,13 @@
 			};
 		};
 
-		gpioe: gpio@2d000080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+		gpioe: gpio@2d000000 {
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d000000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
@@ -497,12 +498,13 @@
 				gpio-ranges = <&iomuxc1 0 32 24>;
 		};
 
-		gpiof: gpio@2d010080 {
-				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+		gpiof: gpio@2d010000 {
+				compatible = "fsl,imx8ulp-gpio";
+				reg = <0x2d010000 0x1000>;
 				gpio-controller;
 				#gpio-cells = <2>;
-				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
@@ -532,12 +534,13 @@
 			};
 		};
 
-		gpiod: gpio@2e200080 {
-			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+		gpiod: gpio@2e200000 {
+			compatible = "fsl,imx8ulp-gpio";
+			reg = <0x2e200000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
index 98202a437..58ec0b399 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
@@ -23,11 +23,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>;
 
-	pinctrl_enable_3v3_vmmc: enable_3v3_vmmc {
+	pinctrl_enable_3v3_vmmc: enable-3v3-vmmc-grp {
 		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x20>;	/* SODIMM 100 */
 	};
 
-	pinctrl_lvds_converter: lcd-lvds {
+	pinctrl_lvds_converter: lvds-converter-grp {
 		fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18		0x20>,	/* SODIMM  55 */
 			   /* 6B/8B mode. Select LOW - 8B mode (24bit) */
 			   <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17		0x20>,	/* SODIMM  63 */
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index cafd39130..9921ea13a 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -76,6 +76,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
 		enable-active-high;
 	};
 };
@@ -149,6 +150,12 @@
 	status = "okay";
 };
 
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -222,18 +229,28 @@
 		>;
 	};
 
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX		0x31e
+			MX93_PAD_DAP_TDI__LPUART5_RX			0x31e
+			MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B		0x31e
+			MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
+		>;
+	};
+
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
-			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
-			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
-			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
-			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
-			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
-			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
-			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
-			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
-			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x400013fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x400013fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x400013fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x400013fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x400013fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x400013fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x400013fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x400013fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x400013fe
 			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
 		>;
 	};
@@ -250,14 +267,15 @@
 		>;
 	};
 
+	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
-			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
-			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
-			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
-			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
-			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x400013fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x400013fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x400013fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x400013fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x400013fe
 			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
new file mode 100644
index 000000000..af795ecf6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit";
+	compatible = "tq,imx93-tqma9352-mba93xxca",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_12v0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				cpu_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				cpu_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&cpu_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&cpu_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&cpu_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	tcpc-irq-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "USB_C_ALERT#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the on board USB Hub reset which is low
+		 * active as reset signal. The output-low states, the
+		 * signal is inactive, e.g. no reset
+		 */
+		usb-reset-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "USB_RESET#";
+		};
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-high states, the signal
+		 * is active, e.g. card is powered down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-high states, the signal
+		 * is active, e.g. card is disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-high states, the signal
+		 * is active, e.g. card in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+};
+
+&lpspi6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpspi6>;
+	pinctrl-1 = <&pinctrl_lpspi6>;
+	status = "okay";
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&tpm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm6>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpspi6: lpspi6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO00__LPSPI6_PCS0		0x3fe
+			MX93_PAD_GPIO_IO01__LPSPI6_SIN		0x3fe
+			MX93_PAD_GPIO_IO02__LPSPI6_SOUT		0x3fe
+			MX93_PAD_GPIO_IO03__LPSPI6_SCK		0x3fe
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO09__GPIO2_IO09		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_tpm6: tpm6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO08__TPM6_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B   0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 3c5c67ebe..eb3f4cfb6 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -18,6 +18,7 @@
 	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
 	compatible = "tq,imx93-tqma9352-mba93xxla",
 		     "tq,imx93-tqma9352", "fsl,imx93";
+	chassis-type = "embedded";
 
 	chosen {
 		stdout-path = &lpuart1;
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 943b7e665..8f2e7c42a 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -171,6 +171,18 @@
 		status = "disabled";
 	};
 
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
 	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -185,6 +197,46 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; // 30: ADC1
+				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+				clock-names = "dma";
+			};
+
 			aonmix_ns_gpr: syscon@44210000 {
 				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
 				reg = <0x44210000 0x1000>;
@@ -242,6 +294,19 @@
 				status = "disabled";
 			};
 
+			i3c1: i3c-master@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -296,6 +361,8 @@
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -305,6 +372,8 @@
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -323,6 +392,19 @@
 				status = "disabled";
 			};
 
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 1>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			iomuxc: pinctrl@443c0000 {
 				compatible = "fsl,imx93-iomuxc";
 				reg = <0x443c0000 0x10000>;
@@ -351,6 +433,8 @@
 				#clock-cells = <1>;
 				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
 				status = "okay";
 			};
 
@@ -378,14 +462,16 @@
 				};
 			};
 
-			anatop: anatop@44480000 {
-				compatible = "fsl,imx93-anatop", "syscon";
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
 				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
 			};
 
 			tmu: tmu@44482000 {
 				compatible = "fsl,qoriq-tmu";
 				reg = <0x44482000 0x1000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_TMC_GATE>;
 				little-endian;
 				fsl,tmu-range = <0x800000da 0x800000e9
@@ -402,6 +488,21 @@
 				#thermal-sensor-cells = <1>;
 			};
 
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
 
 			adc1: adc@44530000 {
 				compatible = "nxp,imx93-adc";
@@ -424,6 +525,79 @@
 			#size-cells = <1>;
 			ranges;
 
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx93-edma4";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+				clock-names = "dma";
+			};
+
 			wakeupmix_gpr: syscon@42420000 {
 				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
 				reg = <0x42420000 0x1000>;
@@ -497,6 +671,19 @@
 				status = "disabled";
 			};
 
+			i3c2: i3c-master@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;
@@ -551,6 +738,8 @@
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -560,6 +749,8 @@
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -569,6 +760,8 @@
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -578,6 +771,8 @@
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -611,12 +806,59 @@
 				status = "disabled";
 			};
 
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 1>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 1>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -626,6 +868,8 @@
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
+				dmas = <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -743,7 +987,7 @@
 					 <&clk IMX93_CLK_USDHC1_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <8>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -757,7 +1001,7 @@
 					 <&clk IMX93_CLK_USDHC2_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
@@ -820,18 +1064,19 @@
 					 <&clk IMX93_CLK_USDHC3_GATE>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-start-tap = <20>;
+				fsl,tuning-start-tap = <1>;
 				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 		};
 
-		gpio2: gpio@43810080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43810080 0x1000>, <0x43810040 0x40>;
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43810000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
@@ -840,12 +1085,13 @@
 			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
-		gpio3: gpio@43820080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43820080 0x1000>, <0x43820040 0x40>;
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43820000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
@@ -855,12 +1101,13 @@
 				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
-		gpio4: gpio@43830080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x43830080 0x1000>, <0x43830040 0x40>;
+		gpio4: gpio@43830000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43830000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
@@ -869,12 +1116,13 @@
 			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
-		gpio1: gpio@47400080 {
-			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
-			reg = <0x47400080 0x1000>, <0x47400040 0x40>;
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x47400000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 8a9fe5cdc..e2bc53b8d 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -8,6 +8,16 @@
 /* TQ-Systems GmbH MBa8Mx baseboard */
 
 / {
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
 	beeper {
 		compatible = "pwm-beeper";
 		pwms = <&pwm4 0 250000 0>;
@@ -65,12 +75,45 @@
 		};
 	};
 
+	gpio_delays: gpio-delays {
+		compatible = "gpio-delay";
+		#gpio-cells = <3>;
+		gpio-controller;
+		gpios = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		gpio-line-names = "LVDS_BRIDGE_EN_1V8";
+	};
+
+	panel: panel-lvds {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_vcc_3v3>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&lvds_bridge_out>;
+			};
+		};
+	};
+
 	pcie0_refclk: pcie0-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 	};
 
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
 	reg_hub_vbus: regulator-hub-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "MBA8MX_HUB_VBUS";
@@ -157,6 +200,10 @@
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "", "",
+				  "", "", "LVDS_BRIDGE_EN", "",
+				  "", "", "", "",
+				  "", "", "", "";
 
 		sd-mux-oe-hog {
 			gpio-hog;
@@ -227,6 +274,52 @@
 	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2d>;
+		enable-gpios = <&gpio_delays 0 130000 0>;
+		vcc-supply = <&reg_sn65dsi83_1v8>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lvds_bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <20000000>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&lvds_bridge_in>;
+			};
+		};
+	};
 };
 
 &pwm3 {
diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
new file mode 100644
index 000000000..4c38dd541
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+&enet0 {
+	status = "disabled";
+};
+
+&enet1 {
+	status = "disabled";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii";
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enet3 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii";
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enet4 {
+	status = "disabled";
+};
+
+&enet5 {
+	status = "disabled";
+};
+
+&enet6 {
+	status = "disabled";
+};
+
+&mdio0 {
+	status = "okay";
+
+	qsgmii2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x00>;
+	};
+
+	qsgmii2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x01>;
+	};
+
+	qsgmii2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x02>;
+	};
+
+	qsgmii2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+	};
+
+	rgmii_phy2: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	rgmii_phy1: ethernet-phy@e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0e>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	qsgmii1_phy1: ethernet-phy@1c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1c>;
+	};
+
+	qsgmii1_phy2: ethernet-phy@1d {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1d>;
+	};
+
+	qsgmii1_phy3: ethernet-phy@1e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1e>;
+	};
+
+	qsgmii1_phy4: ethernet-phy@1f {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1f>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
new file mode 100644
index 000000000..2471bb109
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls1088a-mbls10xxa-mc.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ (MC related sections)
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpioexp2 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 3 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpioexp2 10 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioexp2 11 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioexp2 8 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioexp2 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dpmac1 {
+	pcs-handle = <&pcs1>;
+};
+
+&dpmac2 {
+	pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+	status = "okay";
+
+	qsgmii2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x00>;
+	};
+
+	qsgmii2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x01>;
+	};
+
+	qsgmii2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x02>;
+	};
+
+	qsgmii2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x03>;
+	};
+
+	rgmii_phy2: ethernet-phy@c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0c>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	rgmii_phy1: ethernet-phy@e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0e>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+	};
+
+	qsgmii1_phy1: ethernet-phy@1c {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1c>;
+	};
+
+	qsgmii1_phy2: ethernet-phy@1d {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1d>;
+	};
+
+	qsgmii1_phy3: ethernet-phy@1e {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1e>;
+	};
+
+	qsgmii1_phy4: ethernet-phy@1f {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1f>;
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
new file mode 100644
index 000000000..65b4ed28a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for MBLS10xxA from TQ
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		autorepeat;
+
+		button-0 {
+			label = "button0";
+			gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F1>;
+		};
+
+		button-1 {
+			label = "button1";
+			gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioexp1: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpioexp2: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpioexp3: gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				vcc-supply = <&reg_3v3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		sfp1_i2c: i2c@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sfp2_i2c: i2c@2 {
+			reg = <0x2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c@3 {
+			reg = <0x3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
new file mode 100644
index 000000000..138f8778a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Gregor Herburger, Timo Herbrecher
+ *
+ * Device Tree Include file for TQMLs10xxA SoM of TQ
+ */
+
+/ {
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+		read-only;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&esdhc {
+	/* eSDHC or eMMC: set by bootloader */
+	non-removable;
+	disable-wp;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
index c06e011a6..299c4ab63 100644
--- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -10,10 +10,9 @@
 / {
 	spmi: spmi@fff24000 {
 		compatible = "hisilicon,kirin970-spmi-controller";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
 		#address-cells = <2>;
 		#size-cells = <0>;
-		status = "okay";
-		reg = <0x0 0xfff24000 0x0 0x1000>;
 		hisilicon,spmi-channel = <2>;
 
 		pmic: pmic@0 {
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index d3adb6a13..76aafa172 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -60,6 +60,25 @@
 		};
 	};
 
+	firmware {
+		svc {
+			compatible = "intel,agilex-svc";
+			method = "smc";
+			memory-region = <&service_reserved>;
+
+			fpga_mgr: fpga-mgr {
+				compatible = "intel,agilex-soc-fpga-mgr";
+			};
+		};
+	};
+
+	fpga-region {
+		compatible = "fpga-region";
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		fpga-mgr = <&fpga_mgr>;
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
@@ -130,7 +149,7 @@
 		compatible = "usb-nop-xceiv";
 	};
 
-	soc {
+	soc@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -138,13 +157,6 @@
 		interrupt-parent = <&intc>;
 		ranges = <0 0 0 0xffffffff>;
 
-		base_fpga_region {
-			#address-cells = <0x2>;
-			#size-cells = <0x2>;
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-
 		clkmgr: clock-controller@ffd10000 {
 			compatible = "intel,agilex-clkmgr";
 			reg = <0xffd10000 0x1000>;
@@ -368,7 +380,7 @@
 			pinctrl-single,function-mask = <0x0000000f>;
 		};
 
-		pinctrl1: pinconf@ffd13100 {
+		pinctrl1: pinctrl@ffd13100 {
 			compatible = "pinctrl-single";
 			#pinctrl-cells = <1>;
 			reg = <0xffd13100 0x20>;
@@ -659,17 +671,5 @@
 
 			status = "disabled";
 		};
-
-		firmware {
-			svc {
-				compatible = "intel,agilex-svc";
-				method = "smc";
-				memory-region = <&service_reserved>;
-
-				fpga_mgr: fpga-mgr {
-					compatible = "intel,agilex-soc-fpga-mgr";
-				};
-			};
-		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index dcdaf7064..d66d425e4 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -73,7 +73,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		#address-cells = <2>;
-		#size-cells =<2>;
+		#size-cells = <2>;
 		interrupt-controller;
 		#redistributor-regions = <1>;
 		redistributor-stride = <0x0 0x20000>;
@@ -315,7 +315,7 @@
 			num-cs = <4>;
 			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
 			dmas = <&dmac0 2>, <&dmac0 3>;
-			dma-names ="tx", "rx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 
 		};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
index 1a32840c7..d22de06e9 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -26,7 +26,7 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		bus@80000000 {
 			compatible = "simple-bus";
 			reg = <0x80000000 0x60000000>,
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 053690657..ad99aefeb 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -113,8 +113,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index 5ddfdff37..2d70a92c2 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -25,12 +25,11 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
-	soc {
+	soc@0 {
 		sdram_edac: memory-controller@f87f8000 {
 			compatible = "snps,ddrc-3.80a";
 			reg = <0xf87f8000 0x400>;
 			interrupts = <0 175 4>;
-			status = "okay";
 		};
 	};
 };
@@ -91,8 +90,6 @@
 		spi-max-frequency = <100000000>;
 
 		m25p,fast-read;
-		cdns,page-size = <256>;
-		cdns,block-size = <16>;
 		cdns,read-delay = <2>;
 		cdns,tshsl-ns = <50>;
 		cdns,tsd2d-ns = <50>;
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 48ec4ebec..b864ffa74 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 3869460aa..996fb39bb 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -126,7 +126,6 @@
 	amba {
 		#address-cells = <2>;
 		#size-cells = <1>;
-		#interrupt-cells = <3>;
 
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58..99b8cb3c4 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 62d03ffa9..b5e042b8e 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -144,7 +144,7 @@
 				clocks = <&cnm_clock>;
 				clock-names = "core";
 				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency=<100000>;
+				clock-frequency = <100000>;
 
 				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&i2c0_pins>;
@@ -163,7 +163,7 @@
 				clocks = <&cnm_clock>;
 				clock-names = "core";
 				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				clock-frequency=<100000>;
+				clock-frequency = <100000>;
 
 				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
new file mode 100644
index 000000000..2a0b07000
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express CPU module board.
+ * This specific carrier board in this mode of operation (external)
+ * only maintains a PCIe link with the CPU module,
+ * which does not require any special DTS definitions.
+ *
+ * AC5X RD works here in external mode (switch selectable at the back of the
+ * board), and connect via an external cable a kit
+ * which would allow it to use an external CN9131 CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier, only on the
+ * CN9131 COM Express CPU module.
+ * What runs the Linux is the CN9131 on the COM Express CPU module,
+ * And it accesses the switch end-point on the AC5X RD portion of the carrier
+ * via PCIe.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+#include "ac5x-rd-carrier.dtsi"
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module";
+	compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier",
+			"marvell,cn9131-cpu-module", "marvell,cn9131",
+			"marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x00000000>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
new file mode 100644
index 000000000..f98629abb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * This specific board in external mode (see below) only maintains
+ * a PCIe link with the COM Express CPU module, which does not
+ * require any special DTS definitions.
+ *
+ * AC5X RD can either work as you would expect, as a complete standalone
+ * box using the internal CPU, or you can move the switch on the back of
+ * the box to "external" mode, and connect via an external cable a kit
+ * which would allow it to use an external CPU COM Express module,
+ * mounted on top of an interposer kit.
+ *
+ * So in this case, once the switch is set to external mode as explained above,
+ * the AC5X RD becomes part of the carrier solution.
+ * This is a development/reference solution, not a full commercial solution,
+ * hence it was designed with the flexibility to be configured in different
+ * modes of operation.
+ *
+ * When the board boots in the external CPU mode, the internal CPU is disabled,
+ * and only the switch portion of the SOC acts as a PCIe end-point, Hence there
+ * is no need to describe this internal (disabled CPU) in the device tree.
+ *
+ * There is no CPU booting in this mode on the carrier,
+ * only on the COM Express CPU module.
+ */
+
+/ {
+	model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+	compatible = "marvell,rd-ac5x-carrier";
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
index 57fc698e5..d6d37a1f6 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -12,3 +12,50 @@
 &eth0 {
 	phy-mode = "2500base-x";
 };
+
+/*
+ * External MV88E6361 switch is only available on v2 of the board.
+ * U-Boot will enable the MDIO bus and switch nodes.
+ */
+&mdio {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+
+	/* Actual device is MV88E6361 */
+	switch: switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth0>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "downlink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				label = "uplink";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				sfp = <&sfp_eth1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index f9abef8dc..870bb380a 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -126,32 +126,32 @@
 
 	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
 
-	ports {
-		switch0port1: port@1 {
+	ethernet-ports {
+		switch0port1: ethernet-port@1 {
 			reg = <1>;
 			label = "lan0";
 			phy-handle = <&switch0phy0>;
 		};
 
-		switch0port2: port@2 {
+		switch0port2: ethernet-port@2 {
 			reg = <2>;
 			label = "lan1";
 			phy-handle = <&switch0phy1>;
 		};
 
-		switch0port3: port@3 {
+		switch0port3: ethernet-port@3 {
 			reg = <3>;
 			label = "lan2";
 			phy-handle = <&switch0phy2>;
 		};
 
-		switch0port4: port@4 {
+		switch0port4: ethernet-port@4 {
 			reg = <4>;
 			label = "lan3";
 			phy-handle = <&switch0phy3>;
 		};
 
-		switch0port5: port@5 {
+		switch0port5: ethernet-port@5 {
 			reg = <5>;
 			label = "wan";
 			phy-handle = <&extphy>;
@@ -160,7 +160,7 @@
 	};
 
 	mdio {
-		switch0phy3: switch0phy3@14 {
+		switch0phy3: ethernet-phy@14 {
 			reg = <0x14>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
index 5fc613d24..fed2dcecb 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -13,7 +13,7 @@
 / {
 	aliases {
 		ethernet0 = &eth0;
-		/* for dsa slave device */
+		/* for DSA user port device */
 		ethernet1 = &switch0port1;
 		ethernet2 = &switch0port2;
 		ethernet3 = &switch0port3;
@@ -145,19 +145,17 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0port0: port@0 {
+			switch0port0: ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
@@ -168,19 +166,19 @@
 				};
 			};
 
-			switch0port1: port@1 {
+			switch0port1: ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			switch0port2: port@2 {
+			switch0port2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
 			};
 
-			switch0port3: port@3 {
+			switch0port3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -192,13 +190,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
index b1b45b4fa..63fbc8352 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -152,31 +152,29 @@
 };
 
 &mdio {
-	switch0: switch0@1 {
+	switch0: ethernet-switch@1 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <1>;
 
 		dsa,member = <0 0>;
 
-		ports: ports {
+		ports: ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "cpu";
 				ethernet = <&eth0>;
 			};
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "wan";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan0";
 				phy-handle = <&switch0phy1>;
@@ -185,7 +183,7 @@
 				nvmem-cell-names = "mac-address";
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan1";
 				phy-handle = <&switch0phy2>;
@@ -199,13 +197,13 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 805ef2d79..f1a9f2234 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -304,9 +304,15 @@
 		reg = <1>;
 	};
 
-	/* switch nodes are enabled by U-Boot if modules are present */
+	/*
+	 * NOTE: switch nodes are enabled by U-Boot if modules are present
+	 * DO NOT change this node name (switch0@10) even if it is not following
+	 * conventions! Deployed U-Boot binaries are explicitly looking for
+	 * this node in order to augment the device tree!
+	 * Also do not touch the "ports" or "port@n" nodes. These are also ABI.
+	 */
 	switch0@10 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x10>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -317,35 +323,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -430,8 +436,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch0@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
@@ -442,19 +449,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1_topaz: switch0phy1@11 {
+			switch0phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy2_topaz: switch0phy2@12 {
+			switch0phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy3_topaz: switch0phy3@13 {
+			switch0phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy4_topaz: switch0phy4@14 {
+			switch0phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -497,8 +504,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@11 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x11>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -509,35 +517,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1: switch1phy1@1 {
+			switch1phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch1phy2: switch1phy2@2 {
+			switch1phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch1phy3: switch1phy3@3 {
+			switch1phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch1phy4: switch1phy4@4 {
+			switch1phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch1phy5: switch1phy5@5 {
+			switch1phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch1phy6: switch1phy6@6 {
+			switch1phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch1phy7: switch1phy7@7 {
+			switch1phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch1phy8: switch1phy8@8 {
+			switch1phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -622,8 +630,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch1@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
@@ -634,19 +643,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch1phy1_topaz: switch1phy1@11 {
+			switch1phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch1phy2_topaz: switch1phy2@12 {
+			switch1phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch1phy3_topaz: switch1phy3@13 {
+			switch1phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch1phy4_topaz: switch1phy4@14 {
+			switch1phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
@@ -689,8 +698,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@12 {
-		compatible = "marvell,mv88e6190";
+		compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
 		reg = <0x12>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -701,35 +711,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1: switch2phy1@1 {
+			switch2phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch2phy2: switch2phy2@2 {
+			switch2phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch2phy3: switch2phy3@3 {
+			switch2phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch2phy4: switch2phy4@4 {
+			switch2phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch2phy5: switch2phy5@5 {
+			switch2phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch2phy6: switch2phy6@6 {
+			switch2phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch2phy7: switch2phy7@7 {
+			switch2phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch2phy8: switch2phy8@8 {
+			switch2phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
@@ -805,8 +815,9 @@
 		};
 	};
 
+	/* NOTE: this node name is ABI, don't change it! */
 	switch2@2 {
-		compatible = "marvell,mv88e6085";
+		compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
 		reg = <0x2>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
@@ -817,19 +828,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch2phy1_topaz: switch2phy1@11 {
+			switch2phy1_topaz: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch2phy2_topaz: switch2phy2@12 {
+			switch2phy2_topaz: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch2phy3_topaz: switch2phy3@13 {
+			switch2phy3_topaz: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch2phy4_topaz: switch2phy4@14 {
+			switch2phy4_topaz: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
index 3f7992337..3a9b69071 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -61,10 +61,10 @@
 	sfp_eth1: sfp-eth1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e300145ad..1cc3fa1c3 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -431,14 +431,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 48202810b..40b7ee7ea 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -301,10 +301,8 @@
 	};
 
 	/* 88E6141 Topaz switch */
-	switch: switch@3 {
+	switch: ethernet-switch@3 {
 		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <3>;
 
 		pinctrl-names = "default";
@@ -314,35 +312,35 @@
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swport1: port@1 {
+			swport1: ethernet-port@1 {
 				reg = <1>;
 				label = "lan0";
 				phy-handle = <&swphy1>;
 			};
 
-			swport2: port@2 {
+			swport2: ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&swphy2>;
 			};
 
-			swport3: port@3 {
+			swport3: ethernet-port@3 {
 				reg = <3>;
 				label = "lan2";
 				phy-handle = <&swphy3>;
 			};
 
-			swport4: port@4 {
+			swport4: ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&swphy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp0_eth1>;
@@ -355,19 +353,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			swphy1: swphy1@17 {
+			swphy1: ethernet-phy@17 {
 				reg = <17>;
 			};
 
-			swphy2: swphy2@18 {
+			swphy2: ethernet-phy@18 {
 				reg = <18>;
 			};
 
-			swphy3: swphy3@19 {
+			swphy3: ethernet-phy@19 {
 				reg = <19>;
 			};
 
-			swphy4: swphy4@20 {
+			swphy4: ethernet-phy@20 {
 				reg = <20>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 412520202..67892f0d2 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -497,42 +497,42 @@
 		reset-deassert-us = <10000>;
 	};
 
-	switch0: switch0@4 {
+	switch0: ethernet-switch@4 {
 		compatible = "marvell,mv88e6085";
 		reg = <4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_switch_reset_pins>;
 		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan2";
 				phy-handle = <&switch0phy0>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan4";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
@@ -545,19 +545,19 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy0: switch0phy0@11 {
+			switch0phy0: ethernet-phy@11 {
 				reg = <0x11>;
 			};
 
-			switch0phy1: switch0phy1@12 {
+			switch0phy1: ethernet-phy@12 {
 				reg = <0x12>;
 			};
 
-			switch0phy2: switch0phy2@13 {
+			switch0phy2: ethernet-phy@13 {
 				reg = <0x13>;
 			};
 
-			switch0phy3: switch0phy3@14 {
+			switch0phy3: ethernet-phy@14 {
 				reg = <0x14>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 2c920e22c..7ec7c789d 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -138,7 +138,6 @@
 
 			odmi: odmi@300000 {
 				compatible = "marvell,odmi-controller";
-				interrupt-controller;
 				msi-controller;
 				marvell,odmi-frames = <4>;
 				reg = <0x300000 0x4000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 4ec1aae0a..7e595ac80 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -511,14 +511,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 47d45ff3d..6fcc34f7b 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -207,11 +207,9 @@
 		reg = <0>;
 	};
 
-	switch6: switch0@6 {
+	switch6: ethernet-switch@6 {
 		/* Actual device is MV88E6393X */
 		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <6>;
 		interrupt-parent = <&cp0_gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
@@ -220,59 +218,59 @@
 
 		dsa,member = <0 0>;
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "p1";
 				phy-handle = <&switch0phy1>;
 			};
 
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "p2";
 				phy-handle = <&switch0phy2>;
 			};
 
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "p3";
 				phy-handle = <&switch0phy3>;
 			};
 
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "p4";
 				phy-handle = <&switch0phy4>;
 			};
 
-			port@5 {
+			ethernet-port@5 {
 				reg = <5>;
 				label = "p5";
 				phy-handle = <&switch0phy5>;
 			};
 
-			port@6 {
+			ethernet-port@6 {
 				reg = <6>;
 				label = "p6";
 				phy-handle = <&switch0phy6>;
 			};
 
-			port@7 {
+			ethernet-port@7 {
 				reg = <7>;
 				label = "p7";
 				phy-handle = <&switch0phy7>;
 			};
 
-			port@8 {
+			ethernet-port@8 {
 				reg = <8>;
 				label = "p8";
 				phy-handle = <&switch0phy8>;
 			};
 
-			port@9 {
+			ethernet-port@9 {
 				reg = <9>;
 				label = "p9";
 				phy-mode = "10gbase-r";
@@ -280,7 +278,7 @@
 				managed = "in-band-status";
 			};
 
-			port@a {
+			ethernet-port@a {
 				reg = <10>;
 				ethernet = <&cp0_eth0>;
 				phy-mode = "10gbase-r";
@@ -293,35 +291,35 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0phy1: switch0phy1@1 {
+			switch0phy1: ethernet-phy@1 {
 				reg = <0x1>;
 			};
 
-			switch0phy2: switch0phy2@2 {
+			switch0phy2: ethernet-phy@2 {
 				reg = <0x2>;
 			};
 
-			switch0phy3: switch0phy3@3 {
+			switch0phy3: ethernet-phy@3 {
 				reg = <0x3>;
 			};
 
-			switch0phy4: switch0phy4@4 {
+			switch0phy4: ethernet-phy@4 {
 				reg = <0x4>;
 			};
 
-			switch0phy5: switch0phy5@5 {
+			switch0phy5: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 
-			switch0phy6: switch0phy6@6 {
+			switch0phy6: ethernet-phy@6 {
 				reg = <0x6>;
 			};
 
-			switch0phy7: switch0phy7@7 {
+			switch0phy7: ethernet-phy@7 {
 				reg = <0x7>;
 			};
 
-			switch0phy8: switch0phy8@8 {
+			switch0phy8: ethernet-phy@8 {
 				reg = <0x8>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000..028496ebc
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express CPU module board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9130-cpu-module", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000..6f3914bcf
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express CPU module board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board";
+	compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+};
+
+&ap0_reg_sd_vccq {
+	regulator-max-microvolt = <1800000>;
+	states = <1800000 0x1 1800000 0x0>;
+	/delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+	/delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+	/delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+	status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+	status = "disabled";
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_eth0 {
+	status = "disabled";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	phy0: ethernet-phy@0 {
+		status = "okay";
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_ge_mdio_pins: ge-mdio-pins {
+			marvell,pins = "mpp40", "mpp41";
+			marvell,function = "ge";
+		};
+	};
+};
+
+&cp0_sdhci0 {
+	status = "disabled";
+};
+
+&cp0_spi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	/delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index c99c3372a..1e6f91731 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -32,10 +32,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
@@ -44,8 +50,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r4.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
@@ -53,4 +62,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf..2d0ef6f23 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -129,7 +129,7 @@
 };
 
 &pio {
-	eth_default: eth_default {
+	eth_default: eth-default-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
@@ -156,7 +156,7 @@
 		};
 	};
 
-	eth_sleep: eth_sleep {
+	eth_sleep: eth-sleep-pins {
 		tx_pins {
 			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
 				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
@@ -182,14 +182,14 @@
 		};
 	};
 
-	usb0_id_pins_float: usb0_iddig {
+	usb0_id_pins_float: usb0-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
 			bias-pull-up;
 		};
 	};
 
-	usb1_id_pins_float: usb1_iddig {
+	usb1_id_pins_float: usb1-iddig-pins {
 		pins_iddig {
 			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index ed1a9d319..f767f921b 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -249,10 +249,11 @@
 		#clock-cells = <1>;
 	};
 
-	infracfg: syscon@10001000 {
+	infracfg: clock-controller@10001000 {
 		compatible = "mediatek,mt2712-infracfg", "syscon";
 		reg = <0 0x10001000 0 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	pericfg: syscon@10003000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index b605313be..a1b96013f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -8,8 +8,6 @@
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
 		mt6358codec: mt6358codec {
@@ -128,7 +126,6 @@
 			};
 
 			mt6358_vrf12_reg: ldo_vrf12 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -136,7 +133,6 @@
 			};
 
 			mt6358_vio18_reg: ldo_vio18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -153,7 +149,6 @@
 			};
 
 			mt6358_vcamio_reg: ldo_vcamio {
-				compatible = "regulator-fixed";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -168,7 +163,6 @@
 			};
 
 			mt6358_vcn18_reg: ldo_vcn18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -176,7 +170,6 @@
 			};
 
 			mt6358_vfe28_reg: ldo_vfe28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vfe28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -193,7 +186,6 @@
 			};
 
 			mt6358_vcn28_reg: ldo_vcn28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vcn28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -218,7 +210,6 @@
 			};
 
 			mt6358_vxo22_reg: ldo_vxo22 {
-				compatible = "regulator-fixed";
 				regulator-name = "vxo22";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
@@ -234,7 +225,6 @@
 			};
 
 			mt6358_vaux18_reg: ldo_vaux18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaux18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -249,7 +239,6 @@
 			};
 
 			mt6358_vbif28_reg: ldo_vbif28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vbif28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -280,7 +269,6 @@
 			};
 
 			mt6358_vio28_reg: ldo_vio28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vio28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
@@ -288,7 +276,6 @@
 			};
 
 			mt6358_va12_reg: ldo_va12 {
-				compatible = "regulator-fixed";
 				regulator-name = "va12";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -297,22 +284,14 @@
 			};
 
 			mt6358_vrf18_reg: ldo_vrf18 {
-				compatible = "regulator-fixed";
 				regulator-name = "vrf18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-enable-ramp-delay = <120>;
 			};
 
-			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
-				regulator-name = "vcn33_bt";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3500000>;
-				regulator-enable-ramp-delay = <270>;
-			};
-
-			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
-				regulator-name = "vcn33_wifi";
+			mt6358_vcn33_reg: ldo_vcn33 {
+				regulator-name = "vcn33";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3500000>;
 				regulator-enable-ramp-delay = <270>;
@@ -340,7 +319,6 @@
 			};
 
 			mt6358_vaud28_reg: ldo_vaud28 {
-				compatible = "regulator-fixed";
 				regulator-name = "vaud28";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index b5746e6d0..7364c7278 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -22,6 +22,23 @@
 		serial1 = &uart1;
 	};
 
+	backlight_lcd0: backlight {
+		compatible = "led-backlight";
+		leds = <&disp_led_pwm>, <&pmic_bl_led>;
+
+		default-brightness-level = <300>;
+	};
+
+	led-controller-display {
+		compatible = "pwm-leds";
+
+		disp_led_pwm: led-0 {
+			label = "backlight-pwm";
+			pwms = <&pwm0 0 500000>;
+			max-brightness = <1024>;
+		};
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x1e800000>;
@@ -49,6 +66,65 @@
 			no-map;
 		};
 	};
+
+	vreg_disp_avdd: regulator-disp-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_avdd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 138 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_disp_avee: regulator-disp-avee {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_avee";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 139 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_disp_vddh: regulator-disp-vddh {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_vddh";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		compatible = "sharp,ls060t1sx01";
+		reg = <0>;
+		avdd-supply = <&vreg_disp_avdd>;
+		avee-supply = <&vreg_disp_avee>;
+		vddi-supply = <&mt6331_vgp3_reg>;
+		vddh-supply = <&vreg_disp_vddh>;
+		reset-gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight_lcd0>;
+
+		pinctrl-0 = <&disp_rst_pins>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+
+	port {
+		dsi0_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &fhctl {
@@ -163,7 +239,17 @@
 	status = "okay";
 };
 
+&mt6331_vgp3_reg {
+	regulator-min-microvolt = <1800000>;
+};
+
 &pio {
+	disp_rst_pins: lcm-pins {
+		pins-rst {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+		};
+	};
+
 	mmc0_pins_default: emmc-sdr-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
@@ -338,6 +424,21 @@
 	 * an interrupt on the companion, so we use the MT6332 IRQ GPIO.
 	 */
 	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6332-led {
+		compatible = "mediatek,mt6332-led";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic_bl_led: led@0 {
+			reg = <0>;
+			label = "backlight-pmic";
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
 };
 
 &uart0 {
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index 597bce2fe..e5e269a66 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2015 MediaTek Inc.
- * Author: Mars.C <mars.cheng@mediatek.com>
+ * Copyright (C) 2023 Collabora Ltd.
+ * Authors: Mars.C <mars.cheng@mediatek.com>
+ *          AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -19,6 +21,23 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -434,6 +453,26 @@
 			#mbox-cells = <2>;
 		};
 
+		mipi_tx0: dsi-phy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@10221000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -690,6 +729,211 @@
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt6795-disp-ovl", "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt6795-disp-rdma", "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt6795-disp-wdma", "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt6795-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt6795-disp-aal", "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt6795-disp-gamma", "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt6795-disp-merge", "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt6795-disp-split", "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt6795-disp-ufoe", "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt6795-dsi", "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt6795-dpi", "mediatek,mt8183-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>, <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt6795-disp-pwm", "mediatek,mt8173-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>, <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+					      <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>;
+		};
+
 		larb0: larb@14021000 {
 			compatible = "mediatek,mt6795-smi-larb";
 			reg = <0 0x14021000 0 0x1000>;
@@ -708,6 +952,13 @@
 			clock-names = "apb", "smi";
 		};
 
+		od@14023000 {
+			compatible = "mediatek,mt6795-disp-od", "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
+		};
+
 		larb2: larb@15001000 {
 			compatible = "mediatek,mt6795-smi-larb";
 			reg = <0 0x15001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 94e1cc9fb..850b3e277 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -75,6 +75,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -153,8 +154,7 @@
 			reg = <0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			interrupt-parent = <&pio>;
-			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
 			reset-gpios = <&pio 54 0>;
 
 			ports {
@@ -385,9 +385,9 @@
 	i2s1_pins: i2s1-pins {
 		mux {
 			function = "i2s";
-			groups =  "i2s_out_mclk_bclk_ws",
-				  "i2s1_in_data",
-				  "i2s1_out_data";
+			groups = "i2s_out_mclk_bclk_ws",
+				 "i2s1_in_data",
+				 "i2s1_out_data";
 		};
 
 		conf {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c435984ca..5c26021fc 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -57,6 +57,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -311,9 +312,9 @@
 	i2s1_pins: i2s1-pins {
 		mux {
 			function = "i2s";
-			groups =  "i2s_out_mclk_bclk_ws",
-				  "i2s1_in_data",
-				  "i2s1_out_data";
+			groups = "i2s_out_mclk_bclk_ws",
+				 "i2s1_in_data",
+				 "i2s1_out_data";
 		};
 
 		conf {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 3ee9266fa..917fa39a7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -252,7 +252,7 @@
 		clock-names = "hif_sel";
 	};
 
-	cir: cir@10009000 {
+	cir: ir-receiver@10009000 {
 		compatible = "mediatek,mt7622-cir";
 		reg = <0 0x10009000 0 0x1000>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
@@ -283,16 +283,14 @@
 		};
 	};
 
-	apmixedsys: apmixedsys@10209000 {
-		compatible = "mediatek,mt7622-apmixedsys",
-			     "syscon";
+	apmixedsys: clock-controller@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys";
 		reg = <0 0x10209000 0 0x1000>;
 		#clock-cells = <1>;
 	};
 
-	topckgen: topckgen@10210000 {
-		compatible = "mediatek,mt7622-topckgen",
-			     "syscon";
+	topckgen: clock-controller@10210000 {
+		compatible = "mediatek,mt7622-topckgen";
 		reg = <0 0x10210000 0 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -515,7 +513,6 @@
 			 <&pericfg CLK_PERI_AUXADC_PD>;
 		clock-names = "therm", "auxadc";
 		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
-		reset-names = "therm";
 		mediatek,auxadc = <&auxadc>;
 		mediatek,apmixedsys = <&apmixedsys>;
 		nvmem-cells = <&thermal_calibration>;
@@ -734,9 +731,8 @@
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
 	};
 
-	ssusbsys: ssusbsys@1a000000 {
-		compatible = "mediatek,mt7622-ssusbsys",
-			     "syscon";
+	ssusbsys: clock-controller@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys";
 		reg = <0 0x1a000000 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -793,9 +789,8 @@
 		};
 	};
 
-	pciesys: pciesys@1a100800 {
-		compatible = "mediatek,mt7622-pciesys",
-			     "syscon";
+	pciesys: clock-controller@1a100800 {
+		compatible = "mediatek,mt7622-pciesys";
 		reg = <0 0x1a100800 0 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -921,12 +916,13 @@
 		};
 	};
 
-	hifsys: syscon@1af00000 {
-		compatible = "mediatek,mt7622-hifsys", "syscon";
+	hifsys: clock-controller@1af00000 {
+		compatible = "mediatek,mt7622-hifsys";
 		reg = <0 0x1af00000 0 0x70>;
+		#clock-cells = <1>;
 	};
 
-	ethsys: syscon@1b000000 {
+	ethsys: clock-controller@1b000000 {
 		compatible = "mediatek,mt7622-ethsys",
 			     "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
@@ -966,9 +962,7 @@
 	};
 
 	eth: ethernet@1b100000 {
-		compatible = "mediatek,mt7622-eth",
-			     "mediatek,mt2701-eth",
-			     "syscon";
+		compatible = "mediatek,mt7622-eth";
 		reg = <0 0x1b100000 0 0x20000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index b876e5012..ed79ad1ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -43,7 +43,7 @@
 		#cooling-cells = <2>;
 		/* cooling level (0, 1, 2) - pwm inverted */
 		cooling-levels = <255 96 0>;
-		pwms = <&pwm 0 10000 0>;
+		pwms = <&pwm 0 10000>;
 		status = "okay";
 	};
 
@@ -146,19 +146,19 @@
 
 &cpu_thermal {
 	cooling-maps {
-		cpu-active-high {
+		map-cpu-active-high {
 			/* active: set fan to cooling level 2 */
 			cooling-device = <&fan 2 2>;
 			trip = <&cpu_trip_active_high>;
 		};
 
-		cpu-active-med {
+		map-cpu-active-med {
 			/* active: set fan to cooling level 1 */
 			cooling-device = <&fan 1 1>;
 			trip = <&cpu_trip_active_med>;
 		};
 
-		cpu-active-low {
+		map-cpu-active-low {
 			/* active: set fan to cooling level 0 */
 			cooling-device = <&fan 0 0>;
 			trip = <&cpu_trip_active_low>;
@@ -205,8 +205,7 @@
 		reg = <31>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 3ef371ca2..2f884c24f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -237,12 +237,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index fc751e049..559990dcd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -16,49 +16,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	clk40m: oscillator-40m {
-		compatible = "fixed-clock";
-		clock-frequency = <40000000>;
-		#clock-cells = <0>;
-		clock-output-names = "clkxtal";
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu0: cpu@0 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
-			device_type = "cpu";
 			compatible = "arm,cortex-a53";
-			enable-method = "psci";
 			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
-			device_type = "cpu";
-			enable-method = "psci";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
 			#cooling-cells = <2>;
 		};
 	};
 
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -121,38 +121,30 @@
 
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
 	soc {
-		#address-cells = <2>;
-		#size-cells = <2>;
 		compatible = "simple-bus";
 		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
 
 		gic: interrupt-controller@c000000 {
 			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
 			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
 			      <0 0x0c080000 0 0x80000>,  /* GICR */
 			      <0 0x0c400000 0 0x2000>,   /* GICC */
 			      <0 0x0c410000 0 0x1000>,   /* GICH */
 			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupt-parent = <&gic>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
 		infracfg: infracfg@10001000 {
 			compatible = "mediatek,mt7986-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		wed_pcie: wed-pcie@10003000 {
@@ -202,6 +194,19 @@
 			#interrupt-cells = <2>;
 		};
 
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7986-sgmiisys_0",
 				     "syscon";
@@ -234,26 +239,11 @@
 				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ring0", "ring1", "ring2", "ring3";
 			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-			clock-names = "infra_eip97_ck";
 			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
 			status = "disabled";
 		};
 
-		pwm: pwm@10048000 {
-			compatible = "mediatek,mt7986-pwm";
-			reg = <0 0x10048000 0 0x1000>;
-			#clock-cells = <1>;
-			#pwm-cells = <2>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&topckgen CLK_TOP_PWM_SEL>,
-				 <&infracfg CLK_INFRA_PWM_STA>,
-				 <&infracfg CLK_INFRA_PWM1_CK>,
-				 <&infracfg CLK_INFRA_PWM2_CK>;
-			clock-names = "top", "main", "pwm1", "pwm2";
-			status = "disabled";
-		};
-
 		uart0: serial@11002000 {
 			compatible = "mediatek,mt7986-uart",
 				     "mediatek,mt6577-uart";
@@ -311,9 +301,9 @@
 
 		spi0: spi@1100a000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100a000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100a000 0 0x100>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPI_SEL>,
@@ -325,9 +315,9 @@
 
 		spi1: spi@1100b000 {
 			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			reg = <0 0x1100b000 0 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0 0x1100b000 0 0x100>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&topckgen CLK_TOP_MPLL_D2>,
 				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
@@ -337,6 +327,20 @@
 			status = "disabled";
 		};
 
+		thermal: thermal@1100c800 {
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
 		auxadc: adc@1100d000 {
 			compatible = "mediatek,mt7986-auxadc";
 			reg = <0 0x1100d000 0 0x1000>;
@@ -388,39 +392,23 @@
 			status = "disabled";
 		};
 
-		thermal: thermal@1100c800 {
-			#thermal-sensor-cells = <1>;
-			compatible = "mediatek,mt7986-thermal";
-			reg = <0 0x1100c800 0 0x800>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&infracfg CLK_INFRA_THERM_CK>,
-				 <&infracfg CLK_INFRA_ADC_26M_CK>,
-				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
-			clock-names = "therm", "auxadc", "adc_32k";
-			mediatek,auxadc = <&auxadc>;
-			mediatek,apmixedsys = <&apmixedsys>;
-			nvmem-cells = <&thermal_calibration>;
-			nvmem-cell-names = "calibration-data";
-		};
-
 		pcie: pcie@11280000 {
 			compatible = "mediatek,mt7986-pcie",
 				     "mediatek,mt8192-pcie";
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
 			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg = <0x00 0x11280000 0x00 0x4000>;
-			reg-names = "pcie-mac";
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			bus-range = <0x00 0xff>;
-			ranges = <0x82000000 0x00 0x20000000 0x00
-				  0x20000000 0x00 0x10000000>;
 			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
 				 <&infracfg CLK_INFRA_IPCIE_CK>,
 				 <&infracfg CLK_INFRA_IPCIER_CK>,
 				 <&infracfg CLK_INFRA_IPCIEB_CK>;
 			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-			status = "disabled";
 
 			phys = <&pcie_port PHY_TYPE_PCIE>;
 			phy-names = "pcie-phy";
@@ -431,6 +419,8 @@
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
+			status = "disabled";
+
 			pcie_intc: interrupt-controller {
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
@@ -441,9 +431,9 @@
 		pcie_phy: t-phy {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
 			status = "disabled";
 
 			pcie_port: pcie-phy@11c00000 {
@@ -468,9 +458,9 @@
 		usb_phy: t-phy@11e10000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
+			ranges = <0 0 0x11e10000 0x1700>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0 0x11e10000 0x1700>;
 			status = "disabled";
 
 			u2port0: usb-phy@0 {
@@ -498,8 +488,6 @@
 		};
 
 		ethsys: syscon@15000000 {
-			 #address-cells = <1>;
-			 #size-cells = <1>;
 			 compatible = "mediatek,mt7986-ethsys",
 				      "syscon";
 			 reg = <0 0x15000000 0 0x1000>;
@@ -533,20 +521,6 @@
 			mediatek,wo-ccif = <&wo_ccif1>;
 		};
 
-		wo_ccif0: syscon@151a5000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151a5000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		wo_ccif1: syscon@151ad000 {
-			compatible = "mediatek,mt7986-wo-ccif", "syscon";
-			reg = <0 0x151ad000 0 0x1000>;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
 			reg = <0 0x15100000 0 0x80000>;
@@ -579,26 +553,39 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
 			mediatek,wed-pcie = <&wed_pcie>;
 			mediatek,wed = <&wed0>, <&wed1>;
-			#reset-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		wifi: wifi@18000000 {
 			compatible = "mediatek,mt7986-wmac";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
 			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
 			reset-names = "consys";
 			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
 				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
 			clock-names = "mcu", "ap2conn";
-			reg = <0 0x18000000 0 0x1000000>,
-			      <0 0x10003000 0 0x1000>,
-			      <0 0x11d10000 0 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
@@ -646,4 +633,13 @@
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index dde190442..57dcaeef3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -152,12 +152,13 @@
 	pinctrl-0 = <&spi_flash_pins>;
 	cs-gpios = <0>, <0>;
 	status = "okay";
-	spi_nand: spi_nand@0 {
+
+	spi_nand: flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
-		spi-tx-buswidth = <4>;
-		spi-rx-buswidth = <4>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
index bdcd35cec..90cbbc18a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -13,8 +13,7 @@
 	touchscreen2: touchscreen@34 {
 		compatible = "melfas,mip4_ts";
 		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/*
@@ -26,8 +25,7 @@
 		compatible = "hid-over-i2c";
 		reg = <0x20>;
 		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -39,8 +37,7 @@
 	 */
 	trackpad2: trackpad@2c {
 		compatible = "hid-over-i2c";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x2c>;
 		hid-descr-addr = <0x0020>;
 		wakeup-source;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 111495622..8d614ac2c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -245,8 +245,7 @@
 		reg = <0x1a>;
 		avdd-supply = <&mt6397_vgp1_reg>;
 		cpvdd-supply = <&mt6397_vcama_reg>;
-		interrupt-parent = <&pio>;
-		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&rt5650_irq>;
 		#sound-dai-cells = <1>;
@@ -308,8 +307,7 @@
 	da9211: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
-		interrupt-parent = <&pio>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
 
 		regulators {
 			da9211_vcpu_reg: BUCKA {
@@ -353,8 +351,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -366,8 +363,7 @@
 
 	trackpad: trackpad@15 {
 		compatible = "elan,ekth3000";
-		interrupt-parent = <&pio>;
-		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x15>;
 		vcc-supply = <&mt6397_vgp6_reg>;
 		wakeup-source;
@@ -439,8 +435,7 @@
 	btmrvl: btmrvl@2 {
 		compatible = "marvell,sd8897-bt";
 		reg = <2>;
-		interrupt-parent = <&pio>;
-		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = /bits/ 16 <0x0d>;
 		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
@@ -448,8 +443,7 @@
 	mwifiex: mwifiex@1 {
 		compatible = "marvell,sd8897";
 		reg = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>;
 		marvell,wakeup-pin = <3>;
 	};
 };
@@ -933,8 +927,7 @@
 		compatible = "mediatek,mt6397";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
@@ -1160,8 +1153,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0x0>;
 		spi-max-frequency = <12000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>;
 		google,cros-ec-spi-msg-delay = <500>;
 
 		i2c_tunnel: i2c-tunnel0 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index d258c8021..0e5c628d1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -303,8 +303,7 @@
 
 	pmic: pmic {
 		compatible = "mediatek,mt6397";
-		interrupt-parent = <&pio>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c47d7d900..cac4cd0a0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1368,10 +1368,9 @@
 			#clock-cells = <1>;
 		};
 
-		vcodec_dec: vcodec@16000000 {
+		vcodec_dec: vcodec@16020000 {
 			compatible = "mediatek,mt8173-vcodec-dec";
-			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
-			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			reg = <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
 			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
 			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
 			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
@@ -1382,6 +1381,8 @@
 			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
 			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
 			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
 			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
@@ -1392,6 +1393,7 @@
 				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
 				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
 			mediatek,vpu = <&vpu>;
+			mediatek,vdecsys = <&vdecsys>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
 			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
 				 <&topckgen CLK_TOP_UNIVPLL_D2>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index 77f9ab94c..681deddff 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -381,6 +381,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 2c69e7658..8b57706ac 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&da7219_pins>;
 		compatible = "dlg,da7219";
 		reg = <0x1a>;
-		interrupt-parent = <&pio>;
-		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+		interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>;
 
 		dlg,micbias-lvl = <2600>;
 		dlg,mic-amp-in-sel = "diff";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 0799c48ad..548e22c19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -11,8 +11,7 @@
 		pinctrl-0 = <&ts3a227e_pins>;
 		compatible = "ti,ts3a227e";
 		reg = <0x3b>;
-		interrupt-parent = <&pio>;
-		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>;
 		status = "okay";
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
index 552bfc726..0b45aee2e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -18,8 +18,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
index 77b96ddf6..b595622e7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -30,8 +30,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
index 37e6e58f6..5a1c39318 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
index 0e0960400..3ea4fdb40 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -17,8 +17,7 @@
 
 	compatible = "hid-over-i2c";
 	reg = <0x10>;
-	interrupt-parent = <&pio>;
-	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&touchscreen_pins>;
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
new file mode 100644
index 000000000..4eb2a0d57
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku0 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
new file mode 100644
index 000000000..6a733361e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google makomo sku1 board";
+	chassis-type = "laptop";
+	compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
new file mode 100644
index 000000000..8ce9568fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
new file mode 100644
index 000000000..6a7ae6165
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google pico6 board";
+	chassis-type = "convertible";
+	compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183";
+
+	bt_wakeup: bt-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_wakeup>;
+
+		wobt {
+			label = "Wake on BT";
+			gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	i2c-scl-internal-delay-ns = <25000>;
+
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&wifi_wakeup {
+	wowlan {
+		gpios = <&pio 113 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&wifi_pwrseq {
+	post-power-on-delay-ms = <50>;
+
+	/* Toggle WIFI_ENABLE to reset the chip. */
+	reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+};
+
+&wifi_pins_pwrseq {
+	pins-wifi-enable {
+		pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+	};
+};
+
+&mmc1_pins_default {
+	pins-cmd-dat {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1_pins_uhs {
+	pins-clk {
+		drive-strength = <MTK_DRIVE_6mA>;
+	};
+};
+
+&mmc1 {
+	bluetooth@2 {
+		reg = <2>;
+		compatible = "mediatek,mt7921s-bluetooth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins_reset>;
+		reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pio {
+	bt_pins_wakeup: bt-pins-wakeup {
+		piins-bt-wakeup {
+			pinmux = <PINMUX_GPIO42__FUNC_GPIO42>;
+			input-enable;
+		};
+	};
+
+	bt_pins_reset: bt-pins-reset {
+		pins-bt-reset {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-high;
+		};
+	};
+};
+
+/delete-node/ &bluetooth;
+/delete-node/ &bt_pins;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 820260348..7592e3b86 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -149,7 +149,6 @@
 		reg = <0x58>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&anx7625_pins>;
-		panel_flags = <1>;
 		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
 		vdd10-supply = <&pp1200_mipibrdg>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
index fcce8ea12..1ecf39458 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -14,6 +14,24 @@
 		     "google,kakadu", "mediatek,mt8183";
 };
 
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
+
 &sound {
 	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
index ebfabba72..ba74109a4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -13,3 +13,21 @@
 	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
 			"google,kakadu", "mediatek,mt8183";
 };
+
+&i2c0 {
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&panel {
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index a11adeb29..bfb9e42c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -63,19 +63,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&open_touch>;
-
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
-
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-	};
 };
 
 &mt6358_vcama2_reg {
@@ -373,6 +360,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
@@ -384,5 +375,5 @@
 
 &panel {
 	status = "okay";
-	compatible = "boe,tv105wum-nw0";
+	/* compatible will be set in board dts */
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
new file mode 100644
index 000000000..05361008e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
new file mode 100644
index 000000000..cf008ed82
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "Google katsu sku38 board";
+	chassis-type = "tablet";
+	compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
+};
+
+&i2c0 {
+	touchscreen1: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&lcd_pp3300>;
+	};
+};
+
+&panel {
+	compatible = "starry,2081101qfh032011-53g";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KATSU";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index 4864c39e5..5c1bf6a1e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -48,8 +48,7 @@
 	touchscreen: touchscreen@10 {
 		compatible = "hid-over-i2c";
 		reg = <0x10>;
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touch_default>;
 
@@ -340,6 +339,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index d5f41c6c9..0f5fa893a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -54,8 +54,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&open_touch>;
 
-		interrupt-parent = <&pio>;
-		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>;
 
 		post-power-on-delay-ms = <10>;
 		hid-descr-addr = <0x0001>;
@@ -344,6 +343,10 @@
 };
 
 &cros_ec {
+	cbas {
+		compatible = "google,cros-cbas";
+	};
+
 	keyboard-controller {
 		compatible = "google,cros-ec-keyb-switches";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 6f333f5cb..41aef6c3e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -103,6 +103,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	/* system wide semi-regulated power rail from charger */
+	reg_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -404,8 +412,27 @@
 	Avdd-supply = <&mt6358_vaud28_reg>;
 };
 
+&mt6358regulator {
+	vsys-ldo1-supply = <&reg_vsys>;
+	vsys-ldo2-supply = <&reg_vsys>;
+	vsys-ldo3-supply = <&reg_vsys>;
+	vsys-vcore-supply = <&reg_vsys>;
+	vsys-vdram1-supply = <&reg_vsys>;
+	vsys-vgpu-supply = <&reg_vsys>;
+	vsys-vmodem-supply = <&reg_vsys>;
+	vsys-vpa-supply = <&reg_vsys>;
+	vsys-vproc11-supply = <&reg_vsys>;
+	vsys-vproc12-supply = <&reg_vsys>;
+	vsys-vs1-supply = <&reg_vsys>;
+	vsys-vs2-supply = <&reg_vsys>;
+	vs1-ldo1-supply = <&mt6358_vs1_reg>;
+	vs2-ldo1-supply = <&mt6358_vdram1_reg>;
+	vs2-ldo2-supply = <&mt6358_vs2_reg>;
+	vs2-ldo3-supply = <&mt6358_vs2_reg>;
+	vs2-ldo4-supply = <&mt6358_vs2_reg>;
+};
+
 &mt6358_vgpu_reg {
-	regulator-min-microvolt = <625000>;
 	regulator-max-microvolt = <900000>;
 
 	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
@@ -818,6 +845,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -831,7 +862,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&scp_pins>;
 
-	cros_ec {
+	cros-ec-rpmsg {
 		compatible = "google,cros-ec-rpmsg";
 		mediatek,rpmsg-name = "cros-ec-rpmsg";
 	};
@@ -856,14 +887,13 @@
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&h1_int_od_l>;
-		interrupt-parent = <&pio>;
-		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+		interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -890,8 +920,7 @@
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		spi-max-frequency = <3000000>;
-		interrupt-parent = <&pio>;
-		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_odl>;
 
@@ -907,10 +936,6 @@
 			google,usb-port-id = <0>;
 		};
 
-		cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		typec {
 			compatible = "google,cros-ec-typec";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index b5784a60c..76449b4cf 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -370,6 +370,10 @@
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index df6e9990c..e1767a4e3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1183,22 +1183,10 @@
 			status = "disabled";
 		};
 
-		svs: svs@1100b000 {
-			compatible = "mediatek,mt8183-svs";
-			reg = <0 0x1100b000 0 0x1000>;
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&infracfg CLK_INFRA_THERM>;
-			clock-names = "main";
-			nvmem-cells = <&svs_calibration>,
-				      <&thermal_calibration>;
-			nvmem-cell-names = "svs-calibration-data",
-					   "t-calibration-data";
-		};
-
 		thermal: thermal@1100b000 {
 			#thermal-sensor-cells = <1>;
 			compatible = "mediatek,mt8183-thermal";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			clocks = <&infracfg CLK_INFRA_THERM>,
 				 <&infracfg CLK_INFRA_AUXADC>;
 			clock-names = "therm", "auxadc";
@@ -1210,6 +1198,18 @@
 			nvmem-cell-names = "calibration-data";
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1628,6 +1628,7 @@
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
 			#clock-cells = <1>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_MFG_ASYNC>;
 		};
 
 		gpu: gpu@13040000 {
@@ -1900,6 +1901,36 @@
 			#clock-cells = <1>;
 		};
 
+		vcodec_dec: video-codec@16020000 {
+			compatible = "mediatek,mt8183-vcodec-dec";
+			reg = <0 0x16020000 0 0x1000>,		/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,		/* VDEC_VLD */
+			      <0 0x16021800 0 0x800>,		/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,		/* VDEC_MC */
+			      <0 0x16023000 0 0x1000>,		/* VDEC_AVCVLD */
+			      <0 0x16024000 0 0x1000>,		/* VDEC_AVCMV */
+			      <0 0x16025000 0 0x1000>,		/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,		/* VP8_VD */
+			      <0 0x16027000 0 0x800>,		/* VP6_VD */
+			      <0 0x16027800 0 0x800>,		/* VP8_VL */
+			      <0 0x16028400 0 0x400>;		/* VP9_VD */
+			reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp",
+				    "hwd", "hwq", "hwb", "hwg";
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>;
+			mediatek,scp = <&scp>;
+			mediatek,vdecsys = <&vdecsys>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>;
+			clock-names = "vdec";
+		};
+
 		larb1: larb@16010000 {
 			compatible = "mediatek,mt8183-smi-larb";
 			reg = <0 0x16010000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index 2fec6fd1c..84ec6c1aa 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -931,11 +931,17 @@
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB {
 					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					clocks = <&topckgen CLK_TOP_USB_TOP>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
 				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
 					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+						 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>;
+					clock-names = "sys_ck", "ref_ck";
 					#power-domain-cells = <0>;
 				};
 
@@ -1061,7 +1067,7 @@
 						reg = <MT8186_POWER_DOMAIN_VENC>;
 						clocks = <&topckgen CLK_TOP_VENC>,
 							 <&vencsys CLK_VENC_CKE1_VENC>;
-						clock-names = "venc0", "larb";
+						clock-names = "venc0", "subsys-larb";
 						mediatek,infracfg = <&infracfg_ao>;
 						#power-domain-cells = <0>;
 					};
@@ -1530,8 +1536,9 @@
 			clocks = <&topckgen CLK_TOP_USB_TOP>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
-				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port0 PHY_TYPE_USB2>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
@@ -1595,8 +1602,9 @@
 			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
-				 <&clk26m>;
-			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
 			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
new file mode 100644
index 000000000..68a82b49f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8188.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8188 evaluation board";
+	compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <8>;
+	hs400-ds-delay = <0x1481b>;
+	max-frequency = <200000000>;
+
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	non-removable;
+
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+
+	status = "okay";
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+	};
+};
+
+&pio {
+	adsp_uart_pins: adsp-uart-pins {
+		pins-tx-rx {
+			pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
+				 <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>,
+				 <PINMUX_GPIO63__FUNC_B1_SCL4>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk-ds {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
+				 <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins-io-ck {
+			pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
+				 <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
+				 <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins-io-cs {
+			pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
+				 <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
+				 <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	spi0_pins: spi0-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
+				 <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
+				 <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
+				 <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+				 <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+				 <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
+				 <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				 <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				 <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				 <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx-tx {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
new file mode 100644
index 000000000..b4315c921
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mediatek,mt8188-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+#include <dt-bindings/power/mediatek,mt8188-power.h>
+
+/ {
+	compatible = "mediatek,mt8188";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			capacity-dmips-mhz = <282>;
+			cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2600000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010000>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cluster_off_l: cluster-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cluster_off_b: cluster-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010010>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	clk13m: oscillator-13m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <13000000>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8188-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8188-infracfg-ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8188-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8188-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c00000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
+				    "iocfg_lm", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 176>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8188-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			mediatek,disable-extrst;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8188-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8188-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_audio26m: clock-controller@10b91100 {
+			compatible = "mediatek,mt8188-adsp-audio26m";
+			reg = <0 0x10b91100 0 0x100>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: adc@11002000 {
+			compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8188-pericfg-ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		xhci1: usb@11200000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>,
+			       <&u3port1 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x468 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>;
+			clock-names = "source", "hclk", "source_cg", "crypto_clk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11280000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11280000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11281000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11281000 0 0x1000>,
+			      <0 0x10220180 0 0x80>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11282000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11282000 0 0x1000>,
+			      <0 0x10220280 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11283000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-c";
+			reg = <0 0x11283000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>,
+					  <&topckgen CLK_TOP_USB_TOP_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		xhci0: usb@112b0000 {
+			compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>,
+					  <&topckgen CLK_TOP_USB_TOP_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x460 2>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e00000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220100 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e01000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e02000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-w";
+			reg = <0 0x11e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e30000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e30000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11e40000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		u3phy2: t-phy@11e80000 {
+			compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e80000 0x1000>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>,
+					 <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11ec0000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec0000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11ec1000 {
+			compatible = "mediatek,mt8188-i2c";
+			reg = <0 0x11ec1000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_en: clock-controller@11ec2000 {
+			compatible = "mediatek,mt8188-imp-iic-wrap-en";
+			reg = <0 0x11ec2000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8188-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: clock-controller@14000000 {
+			compatible = "mediatek,mt8188-vppsys0";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8188-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8188-wpesys-vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys1: clock-controller@14f00000 {
+			compatible = "mediatek,mt8188-vppsys1";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8188-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8188-imgsys1-dip-nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe1: clock-controller@15220000 {
+			compatible = "mediatek,mt8188-imgsys-wpe1";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8188-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe2: clock-controller@15520000 {
+			compatible = "mediatek,mt8188-imgsys-wpe2";
+			reg = <0 0x15520000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys_wpe3: clock-controller@15620000 {
+			compatible = "mediatek,mt8188-imgsys-wpe3";
+			reg = <0 0x15620000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8188-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8188-camsys-rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8188-camsys-yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8188-camsys-rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8188-camsys-yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8188-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8188-vdecsys-soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8188-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8188-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
deleted file mode 100644
index f521f50d4..000000000
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright 2020 Google LLC
- */
-
-#include "mt8192-asurada-audio-rt5682.dtsi"
-#include "mt8192-asurada-audio-rt1015p.dtsi"
-
-&sound {
-	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
-
-	speaker-codecs {
-		sound-dai = <&rt1015p>;
-	};
-
-	headset-codec {
-		sound-dai = <&rt5682 0>;
-	};
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
deleted file mode 100644
index e57437899..000000000
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2022 MediaTek Inc.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
-
-/ {
-	rt1015p: audio-codec {
-		compatible = "realtek,rt1015p";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rt1015p_pins>;
-		sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>;
-		#sound-dai-cells = <0>;
-	};
-};
-
-&pio {
-	rt1015p_pins: rt1015p-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO147__FUNC_GPIO147>;
-			output-low;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
deleted file mode 100644
index 05e48b870..000000000
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2022 MediaTek Inc.
- */
-
-&i2c1 {
-	rt5682: audio-codec@1a {
-		compatible = "realtek,rt5682i";
-		reg = <0x1a>;
-		interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>;
-		realtek,jd-src = <1>;
-		realtek,btndet-delay = <16>;
-		#sound-dai-cells = <1>;
-
-		AVDD-supply = <&mt6359_vio18_ldo_reg>;
-		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
-		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
-		MICVDD-supply = <&pp3300_g>;
-		VBAT-supply = <&pp3300_ldo_z>;
-	};
-};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
index 6e23428a3..fd2cb8765 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -4,7 +4,6 @@
  */
 /dts-v1/;
 #include "mt8192-asurada.dtsi"
-#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
 
 / {
 	model = "Google Hayato rev1";
@@ -101,6 +100,24 @@
 	};
 };
 
+&rt5682 {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_ldo_z>;
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
 &touchscreen {
 	compatible = "hid-over-i2c";
 	post-power-on-delay-ms = <10>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts
new file mode 100644
index 000000000..3127ee5f6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r5-sku2.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+
+/ {
+	model = "Google Hayato rev5";
+	compatible = "google,hayato-rev5-sku2", "google,hayato-sku2",
+		     "google,hayato", "mediatek,mt8192";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
+		MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x03, 0x04, KEY_SCALE)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&rt5682 {
+	compatible = "realtek,rt5682s";
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
+&touchscreen {
+	compatible = "hid-over-i2c";
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+	vdd-supply = <&pp3300_u>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index c6ad10cec..bc88866ab 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -4,7 +4,6 @@
  */
 /dts-v1/;
 #include "mt8192-asurada.dtsi"
-#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
 #include <dt-bindings/leds/common.h>
 
 / {
@@ -58,6 +57,24 @@
 	>;
 };
 
+&rt5682 {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_ldo_z>;
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
 &touchscreen {
 	compatible = "elan,ekth3500";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts
new file mode 100644
index 000000000..0039158c9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r4.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Google Spherion (rev4)";
+	compatible = "google,spherion-rev4", "google,spherion",
+		     "mediatek,mt8192";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		led {
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&cros_ec_pwm {
+	status = "okay";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&rt5682 {
+	compatible = "realtek,rt5682s";
+};
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682s";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
+
+&touchscreen {
+	compatible = "elan,ekth3500";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 0e8b34117..f62b2498e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -210,6 +210,14 @@
 		};
 	};
 
+	rt1015p: audio-codec {
+		compatible = "realtek,rt1015p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1015p_pins>;
+		sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
 	sound: sound {
 		mediatek,platform = <&afe>;
 		pinctrl-names = "aud_clk_mosi_off",
@@ -305,6 +313,19 @@
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+
+	rt5682: audio-codec@1a {
+		/* Realtek RT5682i or RT5682s, sharing the same configuration */
+		reg = <0x1a>;
+		interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>;
+		realtek,jd-src = <1>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_g>;
+	};
 };
 
 &i2c2 {
@@ -1184,6 +1205,13 @@
 		};
 	};
 
+	rt1015p_pins: rt1015p-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO147__FUNC_GPIO147>;
+			output-low;
+		};
+	};
+
 	scp_pins: scp-pins {
 		pins-vreq-vao {
 			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
@@ -1284,7 +1312,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&scp_pins>;
 
-	cros-ec {
+	cros-ec-rpmsg {
 		compatible = "google,cros-ec-rpmsg";
 		mediatek,rpmsg-name = "cros-ec-rpmsg";
 	};
@@ -1308,10 +1336,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		base_detection: cbas {
-			compatible = "google,cros-cbas";
-		};
-
 		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
@@ -1374,7 +1398,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
@@ -1396,7 +1420,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1406,7 +1430,7 @@
 			mt6315_6_vbuck3: vbuck3 {
 				regulator-compatible = "vbuck3";
 				regulator-name = "Vlcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
@@ -1423,7 +1447,7 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <606250>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <800000>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-allowed-modes = <0 1 2>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69f4cded5..eea8d141f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -14,6 +14,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 #include <dt-bindings/reset/mt8192-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -72,6 +74,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@100 {
@@ -90,6 +93,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@200 {
@@ -108,6 +112,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@300 {
@@ -126,6 +131,7 @@
 			next-level-cache = <&l2_0>;
 			performance-domains = <&performance 0>;
 			capacity-dmips-mhz = <427>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@400 {
@@ -144,6 +150,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@500 {
@@ -162,6 +169,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@600 {
@@ -180,6 +188,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@700 {
@@ -198,6 +207,7 @@
 			next-level-cache = <&l2_1>;
 			performance-domains = <&performance 1>;
 			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
 		};
 
 		cpu-map {
@@ -788,6 +798,29 @@
 			status = "disabled";
 		};
 
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8192-lvts-ap";
+			reg = <0 0x1100b000 0 0xc00>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>, <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1114,6 +1147,17 @@
 			status = "disabled";
 		};
 
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8192-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_e_data1>;
+			nvmem-cell-names = "lvts-calib-data-1";
+			#thermal-sensor-cells = <1>;
+		};
+
 		efuse: efuse@11c10000 {
 			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
 			reg = <0 0x11c10000 0 0x1000>;
@@ -1412,6 +1456,7 @@
 			reg = <0 0x14001000 0 0x1000>;
 			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
 					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
@@ -1770,7 +1815,7 @@
 			mediatek,scp = <&scp>;
 			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
 			clocks = <&vencsys CLK_VENC_SET1_VENC>;
-			clock-names = "venc-set1";
+			clock-names = "venc_sel";
 			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
 			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
 		};
@@ -1899,4 +1944,426 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_CAM>;
+
+			trips {
+				cam_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD0>;
+
+			trips {
+				md0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD1>;
+
+			trips {
+				md1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		md2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8192_AP_MD2>;
+
+			trips {
+				md2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				md2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index 2d5e8f371..a82d716f1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -23,3 +23,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2586c32ce..2fe20e0da 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -43,3 +43,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
index f54f9477b..dd294ca98 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -44,3 +44,7 @@
 &ts_10 {
 	status = "okay";
 };
+
+&watchdog {
+	/delete-property/ mediatek,disable-extrst;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 3f508e5c1..121dfd91d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -47,6 +47,19 @@
 		reg = <0 0x40000000 0 0x80000000>;
 	};
 
+	pp3300_disp_x: regulator-pp3300-disp-x {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp_x";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <2500>;
+		enable-active-high;
+		gpio = <&pio 55 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_fixed_pins>;
+		vin-supply = <&pp3300_z2>;
+	};
+
 	/* system wide LDO 3.3V power rail */
 	pp3300_z5: regulator-pp3300-ldo-z5 {
 		compatible = "regulator-fixed";
@@ -114,6 +127,77 @@
 		regulator-boot-on;
 	};
 
+	/* Murata NCP03WF104F05RL */
+	tboard_thermistor1: thermal-sensor-t1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
+	tboard_thermistor2: thermal-sensor-t2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <	(-10000) 1553
+						(-5000) 1485
+						0 1406
+						5000 1317
+						10000 1219
+						15000 1115
+						20000 1007
+						25000 900
+						30000 796
+						35000 697
+						40000 605
+						45000 523
+						50000 449
+						55000 384
+						60000 327
+						65000 279
+						70000 237
+						75000 202
+						80000 172
+						85000 147
+						90000 125
+						95000 107
+						100000 92
+						105000 79
+						110000 68
+						115000 59
+						120000 51
+						125000 44>;
+	};
+
 	usb_vbus: regulator-5v0-usb-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -176,6 +260,42 @@
 	memory-region = <&afe_mem>;
 };
 
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu1 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu2 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu3 {
+	cpu-supply = <&mt6359_vcore_buck_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu5 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu6 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
+&cpu7 {
+	cpu-supply = <&mt6315_6_vbuck1>;
+};
+
 &dp_intf0 {
 	status = "okay";
 
@@ -217,6 +337,20 @@
 			reg = <1>;
 			edp_out: endpoint {
 				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&pp3300_disp_x>;
+			backlight = <&backlight_lcd0>;
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&edp_out>;
+				};
 			};
 		};
 	};
@@ -374,6 +508,14 @@
 	};
 };
 
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
 &mmc0 {
 	status = "okay";
 
@@ -444,7 +586,6 @@
 
 /* for GPU SRAM */
 &mt6359_vsram_others_ldo_reg {
-	regulator-always-on;
 	regulator-min-microvolt = <750000>;
 	regulator-max-microvolt = <750000>;
 };
@@ -881,6 +1022,12 @@
 		};
 	};
 
+	panel_fixed_pins: panel-pwr-default-pins {
+		pins-vreg-en {
+			pinmux = <PINMUX_GPIO55__FUNC_GPIO55>;
+		};
+	};
+
 	pio_default: pio-default-pins {
 		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
@@ -1098,7 +1245,7 @@
 			mt6315_6_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
@@ -1116,12 +1263,41 @@
 			mt6315_7_vbuck1: vbuck1 {
 				regulator-compatible = "vbuck1";
 				regulator-name = "Vgpu";
-				regulator-min-microvolt = <625000>;
+				regulator-min-microvolt = <400000>;
 				regulator-max-microvolt = <1193750>;
 				regulator-enable-ramp-delay = <256>;
 				regulator-ramp-delay = <6250>;
 				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
+			};
+		};
+	};
+};
+
+&thermal_zones {
+	soc-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&tboard_thermistor1>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pmic-area-thermal {
+		polling-delay = <1000>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&tboard_thermistor2>;
+
+		trips {
+			trip-crit {
+				temperature = <84000>;
+				hysteresis = <1000>;
+				type = "critical";
 			};
 		};
 	};
@@ -1150,6 +1326,7 @@
 &xhci0 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
@@ -1157,6 +1334,7 @@
 &xhci1 {
 	status = "okay";
 
+	rx-fifo-depth = <3072>;
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
 	vbus-supply = <&usb_vbus>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
index 5d635085f..4127cb84e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -102,7 +102,7 @@
 };
 
 &eth {
-	phy-mode ="rgmii-id";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
 	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
 	snps,reset-delays-us = <0 10000 80000>;
@@ -128,6 +128,7 @@
 		compatible = "mediatek,mt6360";
 		reg = <0x34>;
 		interrupt-controller;
+		#interrupt-cells = <1>;
 		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "IRQB";
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 6708c4d21..4dd7f7556 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -538,7 +538,7 @@
 					#size-cells = <0>;
 					#power-domain-cells = <1>;
 
-					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+					mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 {
 						reg = <MT8195_POWER_DOMAIN_MFG1>;
 						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
 							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
@@ -1119,7 +1119,7 @@
 
 		lvts_ap: thermal-sensor@1100b000 {
 			compatible = "mediatek,mt8195-lvts-ap";
-			reg = <0 0x1100b000 0 0x1000>;
+			reg = <0 0x1100b000 0 0xc00>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
 			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
@@ -1128,6 +1128,18 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		svs: svs@1100bc00 {
+			compatible = "mediatek,mt8195-svs";
+			reg = <0 0x1100bc00 0 0x400>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calib_data &lvts_efuse_data1>;
+			nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+			resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>;
+			reset-names = "svs_rst";
+		};
+
 		disp_pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -1686,6 +1698,9 @@
 			lvts_efuse_data2: lvts2-calib@1d0 {
 				reg = <0x1d0 0x38>;
 			};
+			svs_calib_data: svs-calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy2: t-phy@11c40000 {
@@ -1718,6 +1733,26 @@
 			};
 		};
 
+		mipi_tx0: dsi-phy@11c80000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c80000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@11c90000 {
+			compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c90000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c5: i2c@11d00000 {
 			compatible = "mediatek,mt8195-i2c",
 				     "mediatek,mt8192-i2c";
@@ -1963,6 +1998,116 @@
 			compatible = "mediatek,mt8195-vppsys0", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		dma-controller@14001000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>;
+			mboxes = <&gce1 12 CMDQ_THR_PRIO_1>,
+				 <&gce1 13 CMDQ_THR_PRIO_1>,
+				 <&gce1 14 CMDQ_THR_PRIO_1>,
+				 <&gce1 21 CMDQ_THR_PRIO_1>,
+				 <&gce1 22 CMDQ_THR_PRIO_1>;
+			#dma-cells = <1>;
+		};
+
+		display@14002000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14002000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+		};
+
+		display@14003000 {
+			compatible = "mediatek,mt8195-mdp3-stitch";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_STITCH>;
+		};
+
+		display@14004000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+		};
+
+		display@14005000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14006000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
+		};
+
+		display@14007000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14007000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+		};
+
+		display@14008000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@14009000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>;
+		};
+
+		display@1400a000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x1400a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_PADDING>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		display@1400b000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x1400b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+		};
+
+		dma-controller@1400c000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x1400c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>;
+			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+			#dma-cells = <1>;
 		};
 
 		mutex@1400f000 {
@@ -2077,6 +2222,7 @@
 			compatible = "mediatek,mt8195-vppsys1", "syscon";
 			reg = <0 0x14f00000 0 0x1000>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0 0x1000>;
 		};
 
 		mutex@14f01000 {
@@ -2112,6 +2258,289 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
 		};
 
+		display@14f06000 {
+			compatible = "mediatek,mt8195-mdp3-split";
+			reg = <0 0x14f06000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>,
+				 <&vppsys1 CLK_VPP1_HDMI_META>,
+				 <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f07000 {
+			compatible = "mediatek,mt8195-mdp3-tcc";
+			reg = <0 0x14f07000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>;
+		};
+
+		dma-controller@14f08000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f08000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f09000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f09000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f0a000 {
+			compatible = "mediatek,mt8195-mdp3-rdma";
+			reg = <0 0x14f0a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		display@14f0b000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>;
+		};
+
+		display@14f0c000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>;
+		};
+
+		display@14f0d000 {
+			compatible = "mediatek,mt8195-mdp3-fg";
+			reg = <0 0x14f0d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>;
+		};
+
+		display@14f0e000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0e000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>;
+		};
+
+		display@14f0f000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f0f000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>;
+		};
+
+		display@14f10000 {
+			compatible = "mediatek,mt8195-mdp3-hdr";
+			reg = <0 0x14f10000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>;
+		};
+
+		display@14f11000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f11000 0 0x1000>;
+			interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f12000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f12000 0 0x1000>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f13000 {
+			compatible = "mediatek,mt8195-mdp3-aal";
+			reg = <0 0x14f13000 0 0x1000>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f14000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f14000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
+		};
+
+		display@14f15000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f15000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
+		};
+
+		display@14f16000 {
+			compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14f16000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
+		};
+
+		display@14f17000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f17000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>;
+		};
+
+		display@14f18000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f18000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>;
+		};
+
+		display@14f19000 {
+			compatible = "mediatek,mt8195-mdp3-tdshp";
+			reg = <0 0x14f19000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>;
+		};
+
+		display@14f1a000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1a000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1b000 {
+			compatible = "mediatek,mt8195-mdp3-merge";
+			reg = <0 0x14f1b000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1c000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1c000 0 0x1000>;
+			interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1d000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1d000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>;
+			interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1e000 {
+			compatible = "mediatek,mt8195-mdp3-color";
+			reg = <0 0x14f1e000 0 0x1000>;
+			interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f1f000 {
+			compatible = "mediatek,mt8195-mdp3-ovl";
+			reg = <0 0x14f1f000 0 0x1000>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>;
+		};
+
+		display@14f20000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f20000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f21000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f21000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		display@14f22000 {
+			compatible = "mediatek,mt8195-mdp3-padding";
+			reg = <0 0x14f22000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		dma-controller@14f23000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f23000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
+					      <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f24000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f24000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
+			iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
+		dma-controller@14f25000 {
+			compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14f25000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
+					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>;
+			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
+			iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+			#dma-cells = <1>;
+		};
+
 		imgsys: clock-controller@15000000 {
 			compatible = "mediatek,mt8195-imgsys";
 			reg = <0 0x15000000 0 0x1000>;
@@ -2623,6 +3052,7 @@
 			reg = <0 0x1c01a000 0 0x1000>;
 			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
 			#clock-cells = <1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0xa000 0x1000>;
 		};
 
 
@@ -2741,6 +3171,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
 		};
 
+		dsi0: dsi@1c008000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c008000 0 0x1000>;
+			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI0>,
+				 <&vdosys0 CLK_VDO0_DSI0_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		dsc0: dsc@1c009000 {
 			compatible = "mediatek,mt8195-disp-dsc";
 			reg = <0 0x1c009000 0 0x1000>;
@@ -2750,6 +3194,20 @@
 			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
 		};
 
+		dsi1: dsi@1c012000 {
+			compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi";
+			reg = <0 0x1c012000 0 0x1000>;
+			interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSI1>,
+				 <&vdosys0 CLK_VDO0_DSI1_DSI>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
 		merge0: merge@1c014000 {
 			compatible = "mediatek,mt8195-disp-merge";
 			reg = <0 0x1c014000 0 0x1000>;
@@ -2776,6 +3234,7 @@
 			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
 			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x6000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
 		};
 
@@ -2846,6 +3305,7 @@
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
 			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
 			clock-names = "vdo1_mutex";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x1000 0x1000>;
 			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
 		};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 413496c92..24581f741 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mediatek,mt8365-power.h>
 
 / {
 	compatible = "mediatek,mt8365";
@@ -298,6 +299,119 @@
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8365-syscfg", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8365-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8365_POWER_DOMAIN_MM {
+					reg = <MT8365_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&mmsys CLK_MM_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_MM_SMI_COMM0>,
+						 <&mmsys CLK_MM_MM_SMI_COMM1>,
+						 <&mmsys CLK_MM_MM_SMI_LARB0>;
+					clock-names = "mm", "mm-0", "mm-1",
+						      "mm-2", "mm-3";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+					mediatek,infracfg-nao = <&infracfg_nao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@MT8365_POWER_DOMAIN_CAM {
+						reg = <MT8365_POWER_DOMAIN_CAM>;
+						clocks = <&camsys CLK_CAM_LARB2>,
+							 <&camsys CLK_CAM_SENIF>,
+							 <&camsys CLK_CAMSV0>,
+							 <&camsys CLK_CAMSV1>,
+							 <&camsys CLK_CAM_FDVT>,
+							 <&camsys CLK_CAM_WPE>;
+						clock-names = "cam-0", "cam-1",
+							      "cam-2", "cam-3",
+							      "cam-4", "cam-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VDEC {
+						reg = <MT8365_POWER_DOMAIN_VDEC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VENC {
+						reg = <MT8365_POWER_DOMAIN_VENC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_APU {
+						reg = <MT8365_POWER_DOMAIN_APU>;
+						clocks = <&infracfg CLK_IFR_APU_AXI>,
+							 <&apu CLK_APU_IPU_CK>,
+							 <&apu CLK_APU_AXI>,
+							 <&apu CLK_APU_JTAG>,
+							 <&apu CLK_APU_IF_CK>,
+							 <&apu CLK_APU_EDMA>,
+							 <&apu CLK_APU_AHB>;
+						clock-names = "apu", "apu-0",
+							      "apu-1", "apu-2",
+							      "apu-3", "apu-4",
+							      "apu-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_CONN {
+					reg = <MT8365_POWER_DOMAIN_CONN>;
+					clocks = <&topckgen CLK_TOP_CONN_32K>,
+						 <&topckgen CLK_TOP_CONN_26M>;
+					clock-names = "conn", "conn1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_MFG {
+					reg = <MT8365_POWER_DOMAIN_MFG>;
+					clocks = <&topckgen CLK_TOP_MFG_SEL>;
+					clock-names = "mfg";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_AUDIO {
+					reg = <MT8365_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_IFR_AUDIO>,
+						 <&infracfg CLK_IFR_AUD_26M_BK>;
+					clock-names = "audio", "audio1", "audio2";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_DSP {
+					reg = <MT8365_POWER_DOMAIN_DSP>;
+					clocks = <&topckgen CLK_TOP_DSP_SEL>,
+						 <&topckgen CLK_TOP_DSP_26M>;
+					clock-names = "dsp", "dsp1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+			};
+		};
+
 		watchdog: watchdog@10007000 {
 			compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt";
 			reg = <0 0x10007000 0 0x100>;
@@ -357,6 +471,14 @@
 			reg = <0 0x10200a80 0 0x20>;
 		};
 
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8365-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>;
+			#iommu-cells = <1>;
+		};
+
 		infracfg_nao: infracfg@1020e000 {
 			compatible = "mediatek,mt8365-infracfg", "syscon";
 			reg = <0 0x1020e000 0 0x1000>;
@@ -603,6 +725,94 @@
 				#phy-cells = <1>;
 			};
 		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8365-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8365-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMM0>,
+				 <&mmsys CLK_MM_MM_SMI_COMM1>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		larb0: larb@14003000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			mediatek,larb-id = <0>;
+		};
+
+		camsys: syscon@15000000 {
+			compatible = "mediatek,mt8365-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_IMG>,
+				 <&camsys CLK_CAM_LARB2>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+			mediatek,larb-id = <2>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8365-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@16010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VDEC>;
+			mediatek,larb-id = <3>;
+		};
+
+		vencsys: syscon@17000000 {
+			compatible = "mediatek,mt8365-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@17010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC>, <&vencsys CLK_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VENC>;
+			mediatek,larb-id = <1>;
+		};
+
+		apu: syscon@19020000 {
+			compatible = "mediatek,mt8365-apu", "syscon";
+			reg = <0 0x19020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
new file mode 100644
index 000000000..7fc515a07
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -0,0 +1,900 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Author: Ben Lok <ben.lok@mediatek.com>
+ *	   Macpaul Lin <macpaul.lin@mediatek.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
+	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
+		     "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &eth;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&disp_pwm0 0 500000>;
+		enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	backlight_lcd1: backlight-lcd1 {
+		compatible = "pwm-backlight";
+		pwms = <&disp_pwm1 0 500000>;
+		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can-clk";
+	};
+
+	edp_panel_fixed_3v3: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_panel_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_3v3_en_pins>;
+	};
+
+	edp_panel_fixed_12v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_backlight_12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_12v_en_pins>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	wifi_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wifi_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&disp_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_default_pins>;
+	status = "okay";
+};
+
+&dmic_codec {
+	wakeup-delay-ms = <200>;
+};
+
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&eth_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eth_phy0: eth-phy0@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&mt6360_ldo1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		pinctrl-0 = <&mt6360_pins>;
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-name = "emi_vdd2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-name = "emi_vddq";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-name = "tp1_p3v0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-name = "panel1_p1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-name = "vmc_pmu";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-name = "vmch_pmu";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			/* This is a measure point, which name is mt6360_ldo1 on schematic */
+			mt6360_ldo6: ldo6 {
+				regulator-name = "mt6360_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-name = "emi_vmddr_en";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+	non-removable;
+};
+
+&mt6359_vaud18_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+/* For USB Hub */
+&mt6359_vcamio_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,mic-type-0 = <1>; /* ACC */
+	mediatek,mic-type-1 = <3>; /* DCC */
+	mediatek,mic-type-2 = <1>; /* ACC */
+};
+
+&pcie0 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&pcie0_default_pins>;
+	pinctrl-1 = <&pcie0_idle_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "disabled";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&pio {
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
+				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
+				 <PINMUX_GPIO65__FUNC_PCM_DO>,
+				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
+				 <PINMUX_GPIO67__FUNC_PCM_DI>,
+				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
+				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	disp_pwm1_default_pins: disp-pwm1-default-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
+		};
+	};
+
+	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
+			output-high;
+		};
+	};
+
+	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			output-high;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+	};
+
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
+			drive-strength = <MTK_DRIVE_6mA>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mt6360_pins: mt6360-pins {
+		pins {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_pins: pcie0-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_idle_pins: pcie0-idle-pins {
+		pins {
+			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
+			bias-disable;
+			output-low;
+		};
+	};
+
+	pcie1_default_pins: pcie1-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+			bias-pull-up;
+		};
+	};
+
+	pwm0_default_pins: pwm0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	spi1_pins: spi1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
+				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
+				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
+				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi-pins {
+		pins {
+			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
+				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
+				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
+				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
+			bias-disable;
+		};
+	};
+
+	touch_pins: touch-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
+			input-enable;
+			bias-disable;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
+			output-high;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
+				 <PINMUX_GPIO101__FUNC_UCTS1>,
+				 <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
+
+	can0: can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&can_clk>;
+		spi-max-frequency = <20000000>;
+		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
+	};
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 8b78be8f4..7e24a212c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -93,6 +93,8 @@
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
 		#address-cells = <2>;
 		#size-cells = <2>;
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 53805555d..9ebb73692 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -31,6 +31,33 @@
 	};
 
 	host1x@50000000 {
+		dsia: dsi@54300000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			status = "okay";
+
+			link2: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+			};
+		};
+
+		dsib: dsi@54400000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			nvidia,ganged-mode = <&dsia>;
+			status = "okay";
+
+			link1: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+				power-supply = <&pplcd_vdd>;
+				ddi-supply = <&pp1800_lcdio>;
+				enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+				link2 = <&link2>;
+				backlight = <&backlight>;
+			};
+		};
+
 		dpaux: dpaux@545c0000 {
 			status = "okay";
 		};
@@ -1651,6 +1678,37 @@
 			status = "okay";
 		};
 
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+			power-supply = <&pplcd_vdd>;
+			enable-supply = <&pp1800_lcdio>;
+			bl-name = "lp8557-backlight";
+			dev-ctrl = /bits/ 8 <0x01>;
+			init-brt = /bits/ 8 <0x80>;
+
+			/* Full scale current, 20mA */
+			rom-11h {
+				rom-addr = /bits/ 8 <0x11>;
+				rom-val = /bits/ 8 <0x05>;
+			};
+			/* Frequency = 4.9kHz, magic undocumented val */
+			rom-12h {
+				rom-addr = /bits/ 8 <0x12>;
+				rom-val = /bits/ 8 <0x29>;
+			};
+			/* Boost freq = 1MHz, BComp option = 1 */
+			rom-13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x03>;
+			};
+			/* 4V OV, 6 output LED string enabled */
+			rom-14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0xbf>;
+			};
+		};
+
 		audio-codec@2d {
 			compatible = "realtek,rt5677";
 			reg = <0x2d>;
@@ -1932,4 +1990,12 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vdd_dsi_csi: regulator-vdd-dsi-csi {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&pp1200_avdd>;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
index 62c4fdad0..553fa4ba1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
@@ -44,6 +44,39 @@
 			status = "okay";
 		};
 
+		i2c@c250000 {
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "CVB_ATX_12V";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@1 {
+					reg = <0x1>;
+					label = "CVB_ATX_3V3";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@2 {
+					reg = <0x2>;
+					label = "CVB_ATX_5V";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+		};
+
 		rtc@c2a0000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
index 5e7797df5..db6ef7116 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
@@ -1987,5 +1987,58 @@
 				status = "okay";
 			};
 		};
+
+		i2c@c240000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "VDD_GPU_SOC";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@1 {
+					reg = <0x1>;
+					label = "VDD_CPU_CV";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@2 {
+					reg = <0x2>;
+					label = "VIN_SYS_5V0";
+					shunt-resistor-micro-ohms = <2000>;
+					ti,summation-disable;
+				};
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina3221";
+				reg = <0x41>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+
+				input@1 {
+					reg = <0x1>;
+					label = "VDDQ_VDD2_1V8AO";
+					shunt-resistor-micro-ohms = <2000>;
+				};
+
+				input@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 4413a9b6d..81a82933e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -30,6 +30,7 @@
 		};
 
 		serial@31d0000 {
+			current-speed = <115200>;
 			status = "okay";
 		};
 
@@ -174,7 +175,7 @@
 			status = "okay";
 
 			phy-handle = <&mgbe0_phy>;
-			phy-mode = "usxgmii";
+			phy-mode = "10gbase-r";
 
 			mdio {
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
index fe08e131b..59c14ded5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -55,6 +55,35 @@
 			avdd-usb-supply = <&vdd_3v3_ao>;
 		};
 
+		i2c@c240000 {
+			status = "okay";
+
+			power-sensor@40 {
+				compatible = "ti,ina3221";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				input@0 {
+					reg = <0x0>;
+					label = "VDD_IN";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+
+				input@1 {
+					reg = <0x1>;
+					label = "VDD_CPU_GPU_CV";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+
+				input@2 {
+					reg = <0x2>;
+					label = "VDD_SOC";
+					shunt-resistor-micro-ohms = <5000>;
+				};
+			};
+		};
+
 		rtc@c2a0000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
index e9460aedd..61b0e69d3 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -12,15 +12,10 @@
 	model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
 
 	aliases {
-		serial0 = &tcu;
 		serial1 = &uarta;
 		serial2 = &uarte;
 	};
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	bus@0 {
 		serial@3100000 {
 			compatible = "nvidia,tegra194-hsuart";
@@ -34,10 +29,6 @@
 			status = "okay";
 		};
 
-		serial@31d0000 {
-			status = "okay";
-		};
-
 		pwm@32a0000 {
 			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
@@ -94,10 +85,6 @@
 		enable-active-high;
 	};
 
-	serial {
-		status = "okay";
-	};
-
 	thermal-zones {
 		tj-thermal {
 			cooling-maps {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
index 39110c123..5d0298b6c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
@@ -29,6 +29,7 @@
 		};
 
 		serial@31d0000 {
+			current-speed = <115200>;
 			status = "okay";
 		};
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index ac69eacf8..d1bd32889 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -694,6 +694,8 @@
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA234_CLK_UARTE>;
 			resets = <&bpmp TEGRA234_RESET_UARTE>;
+			dmas = <&gpcdma 20>, <&gpcdma 20>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -705,8 +707,8 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <400000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C1
-				  &bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C1>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -724,8 +726,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <400000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C3
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C3>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -743,8 +745,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <100000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C4
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C4>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -762,8 +764,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <100000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C6
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C6>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -781,8 +783,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <100000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C7
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C7>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -807,8 +809,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <100000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C9
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C9>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
@@ -819,7 +821,7 @@
 		};
 
 		spi@3210000 {
-			compatible = "nvidia,tegra210-spi";
+			compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
 			reg = <0x0 0x03210000 0x0 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -838,7 +840,7 @@
 		};
 
 		spi@3230000 {
-			compatible = "nvidia,tegra210-spi";
+			compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
 			reg = <0x0 0x03230000 0x0 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -1457,7 +1459,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
 			status = "disabled";
 		};
 
@@ -1491,7 +1493,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
 			status = "disabled";
 		};
 
@@ -1525,7 +1527,7 @@
 					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
 			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
-			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
 			status = "disabled";
 		};
 
@@ -1751,8 +1753,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <100000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C2
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C2>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
@@ -1770,8 +1772,8 @@
 			#size-cells = <0>;
 			status = "disabled";
 			clock-frequency = <400000>;
-			clocks = <&bpmp TEGRA234_CLK_I2C8
-				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clocks = <&bpmp TEGRA234_CLK_I2C8>,
+				 <&bpmp TEGRA234_CLK_PLLP_OUT0>;
 			clock-names = "div-clk", "parent";
 			assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>;
 			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
@@ -1782,7 +1784,7 @@
 		};
 
 		spi@c260000 {
-			compatible = "nvidia,tegra210-spi";
+			compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
 			reg = <0x0 0x0c260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563..39889d5f8 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+
+apq8016-sbc-usb-host-dtbs	:= apq8016-sbc.dtb apq8016-sbc-usb-host.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-usb-host.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
@@ -41,6 +45,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
@@ -81,8 +87,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
@@ -112,11 +121,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-kb.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
@@ -196,6 +210,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7125-xiaomi-joyeuse.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
@@ -208,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-pipa.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
@@ -219,3 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso
new file mode 100644
index 000000000..a82c26b7e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtso
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+/plugin/;
+
+&usb {
+         dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index dabe9f42a..9ffad7d1f 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -233,6 +233,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &lpass {
 	status = "okay";
 };
@@ -241,6 +245,10 @@
 	status = "okay";
 };
 
+&mba_mem {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -256,10 +264,13 @@
 	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
 };
 
+&mpss_mem {
+	status = "okay";
+	reg = <0x0 0x86800000 0x0 0x2b00000>;
+};
+
 &pm8916_codec {
 	status = "okay";
-	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-	clock-names = "mclk";
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
@@ -367,6 +378,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 	firmware-name = "qcom/apq8016/wcnss.mbn";
@@ -380,6 +399,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 /* Enable CoreSight */
 &cti0 { status = "okay"; };
 &cti1 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
index 027d1da7e..4f82bb668 100644
--- a/arch/arm64/boot/dts/qcom/apq8039-t2.dts
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -131,6 +131,10 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &lpass {
 	status = "okay";
 };
@@ -391,3 +395,7 @@
 &wcnss_iris {
 	compatible = "qcom,wcn3680";
 };
+
+&wcnss_mem {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 3067a4091..e8148b3d6 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -1089,7 +1089,6 @@
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
 };
 
 &ufshc {
@@ -1098,6 +1097,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l25a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l25a_1p2>;
 
 	vcc-max-microamp = <600000>;
 	vccq-max-microamp = <450000>;
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index e636a1cb9..8460b538e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -67,6 +67,18 @@
 	};
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcd..32b178b63 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -5,6 +5,7 @@
  * Copyright (c) 2023 The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,apss-ipq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
@@ -36,6 +37,8 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		CPU1: cpu@1 {
@@ -44,6 +47,8 @@
 			reg = <0x1>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		L2_0: l2-cache {
@@ -54,9 +59,27 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,sdi-enabled;
 		};
 	};
 
@@ -81,6 +104,24 @@
 		#size-cells = <2>;
 		ranges;
 
+		bootloader@4a800000 {
+			reg = <0x0 0x4a800000 0x0 0x200000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
 		tz_region: tz@4ac00000 {
 			reg = <0x0 0x4ac00000 0x0 0x200000>;
 			no-map;
@@ -93,6 +134,19 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@5b000 {
+			compatible = "qcom,ipq5018-usb-hsphy";
+			reg = <0x0005b000 0x120>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -128,6 +182,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		sdhc_1: mmc@7804000 {
 			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x7804000 0x1000>;
@@ -145,6 +205,16 @@
 			status = "disabled";
 		};
 
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x078af000 0x200>;
@@ -155,6 +225,61 @@
 			status = "disabled";
 		};
 
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB0_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
@@ -181,6 +306,31 @@
 			};
 		};
 
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq5018", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x40>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5018-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5018-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
index 4870cdb76..b37ae7749 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "ipq5332.dtsi"
 
 / {
@@ -39,6 +40,8 @@
 		pinctrl-names = "default";
 
 		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
 			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tx";
 			default-state = "off";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
index e89e2e948..846413817 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
index efd480a7a..ed8a54eb9 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
index f96b0c8c9..c224ffc65 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -12,6 +12,15 @@
 / {
 	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6";
 	compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+
+	regulator_fixed_5p0: regulator-s0500 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_5p0";
+	};
 };
 
 &blsp1_spi0 {
@@ -79,3 +88,17 @@
 		bias-pull-up;
 	};
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc {
+	dr_mode = "host";
+};
+
+&usbphy0 {
+	vdd-supply = <&regulator_fixed_5p0>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
index eb1fa33d6..d5f99e741 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -15,7 +15,7 @@
 };
 
 &blsp1_i2c1 {
-	clock-frequency  = <400000>;
+	clock-frequency = <400000>;
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index e40c55adf..42e2e48b2 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -91,11 +91,19 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
-		opp-1488000000 {
-			opp-hz = /bits/ 64 <1488000000>;
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -145,11 +153,29 @@
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		usbphy0: phy@7b000 {
+			compatible = "qcom,ipq5332-usb-hsphy";
+			reg = <0x0007b000 0x12c>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom: efuse@a4000 {
 			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
 			reg = <0x000a4000 0x721>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@1d {
+				reg = <0x1d 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -290,6 +316,48 @@
 			status = "disabled";
 		};
 
+		usb: usb@8af8800 {
+			compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			resets = <&gcc GCC_USB_BCR>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x08a00000 0xe000>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				phy-names = "usb2-phy";
+				phys = <&usbphy0>;
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,	/* GICD */
@@ -335,8 +403,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo_board>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index fc907afe5..61c8fd49c 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -96,42 +96,49 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&cpu_speed_bin>;
 		opp-shared;
 
 		opp-864000000 {
 			opp-hz = /bits/ 64 <864000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x3>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -236,31 +243,26 @@
 
 		ssphy_0: ssphy@78000 {
 			compatible = "qcom,ipq6018-qmp-usb3-phy";
-			reg = <0x0 0x00078000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x00078000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "gcc_usb0_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
-				      <0x0 0x00078400 0x0 0x200>, /* Rx */
-				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
-				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: qusb@79000 {
@@ -278,33 +280,25 @@
 
 		pcie_phy: phy@84000 {
 			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+			reg = <0x0 0x00084000 0x0 0x1000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				<&gcc GCC_PCIE0_AHB_CLK>,
+				<&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
 				<&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
-
-			pcie_phy0: phy@84200 {
-				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_pcie0_pipe_clk_src";
-				#clock-cells = <0>;
-			};
 		};
 
 		mdio: mdio@90000 {
@@ -322,6 +316,11 @@
 			reg = <0x0 0x000a4000 0x0 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@135 {
+				reg = <0x135 0x1>;
+				bits = <7 1>;
+			};
 		};
 
 		prng: qrng@e3000 {
@@ -447,6 +446,26 @@
 			qcom,ee = <0>;
 		};
 
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78af000 0x0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b0000 0x0 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart3: serial@78b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x0 0x078b1000 0x0 0x200>;
@@ -457,6 +476,36 @@
 			status = "disabled";
 		};
 
+		blsp1_uart4: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b2000 0x0 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x78b3000 0x0 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b4000 0x0 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -485,6 +534,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b9000 0x0 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c2: i2c@78b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -574,7 +637,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0x08a00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				clocks = <&xo>;
 				clock-names = "ref";
@@ -619,8 +682,8 @@
 			compatible = "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0 0x0b111000 0x0 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
@@ -739,7 +802,7 @@
 			};
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq6018";
 			reg = <0x0 0x20000000 0x0 0xf1d>,
 			      <0x0 0x20000f20 0x0 0xa8>,
@@ -756,7 +819,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy0>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
@@ -767,10 +830,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 92fd924bb..26441447c 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -125,32 +125,26 @@
 
 		ssphy_1: phy@58000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00058000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00058000 0x1000>;
 
 			clocks = <&gcc GCC_USB1_AUX_CLK>,
-				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB1_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_1_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB1_PHY_BCR>,
-				<&gcc GCC_USB3PHY_1_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@58200 {
-				reg = <0x00058200 0x130>,     /* Tx */
-				      <0x00058400 0x200>,     /* Rx */
-				      <0x00058800 0x1f8>,     /* PCS */
-				      <0x00058600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_1_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_1: phy@59000 {
@@ -168,32 +162,26 @@
 
 		ssphy_0: phy@78000 {
 			compatible = "qcom,ipq8074-qmp-usb3-phy";
-			reg = <0x00078000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00078000 0x1000>;
 
 			clocks = <&gcc GCC_USB0_AUX_CLK>,
-				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
-				<&xo>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&xo>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3phy_0_cc_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB0_PHY_BCR>,
-				<&gcc GCC_USB3PHY_0_PHY_BCR>;
-			reset-names = "phy","common";
-			status = "disabled";
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb0_ssphy: phy@78200 {
-				reg = <0x00078200 0x130>,     /* Tx */
-				      <0x00078400 0x200>,     /* Rx */
-				      <0x00078800 0x1f8>,     /* PCS */
-				      <0x00078600 0x044>;     /* PCS misc */
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3phy_0_cc_pipe_clk";
-			};
+			status = "disabled";
 		};
 
 		qusb_phy_0: phy@79000 {
@@ -211,59 +199,48 @@
 
 		pcie_qmp0: phy@84000 {
 			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
-			reg = <0x00084000 0x1bc>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00084000 0x1000>;
 
 			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				 <&gcc GCC_PCIE0_AHB_CLK>,
+				 <&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "pcie20_phy0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
-
-			pcie_phy0: phy@84200 {
-				reg = <0x84200 0x16c>,
-				      <0x84400 0x200>,
-				      <0x84800 0x1f0>,
-				      <0x84c00 0xf4>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie20_phy0_pipe_clk";
-			};
 		};
 
 		pcie_qmp1: phy@8e000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x0008e000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0008e000 0x1000>;
 
 			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
-				<&gcc GCC_PCIE1_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "pcie20_phy1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
 			resets = <&gcc GCC_PCIE1_PHY_BCR>,
-				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
 			status = "disabled";
-
-			pcie_phy1: phy@8e200 {
-				reg = <0x8e200 0x130>,
-				      <0x8e400 0x200>,
-				      <0x8e800 0x1f8>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie20_phy1_pipe_clk";
-			};
 		};
 
 		mdio: mdio@90000 {
@@ -380,8 +357,14 @@
 		gcc: gcc@1800000 {
 			compatible = "qcom,gcc-ipq8074";
 			reg = <0x01800000 0x80000>;
-			clocks = <&xo>, <&sleep_clk>;
-			clock-names = "xo", "sleep_clk";
+			clocks = <&xo>,
+				 <&sleep_clk>,
+				 <&pcie_qmp0>,
+				 <&pcie_qmp1>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "pcie0_pipe",
+				      "pcie1_pipe";
 			#clock-cells = <1>;
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
@@ -417,7 +400,7 @@
 		};
 
 		sdhc_1: mmc@7824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x500>, <0x7824000 0x800>;
 			reg-names = "hc", "core";
 
@@ -534,6 +517,20 @@
 			status = "disabled";
 		};
 
+		blsp1_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
 		blsp1_i2c5: i2c@78b9000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			#address-cells = <1>;
@@ -639,7 +636,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phys = <&qusb_phy_0>, <&ssphy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -681,7 +678,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phys = <&qusb_phy_1>, <&ssphy_1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
@@ -719,8 +716,8 @@
 			compatible = "qcom,ipq8074-apcs-apps-global",
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
-			clocks = <&a53pll>, <&xo>;
-			clock-names = "pll", "xo";
+			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;
@@ -792,7 +789,7 @@
 			};
 		};
 
-		pcie1: pci@10000000 {
+		pcie1: pcie@10000000 {
 			compatible = "qcom,pcie-ipq8074";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
@@ -807,7 +804,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy1>;
+			phys = <&pcie_qmp1>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
@@ -817,13 +814,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142
+			interrupt-map = <0 0 0 1 &intc 0 0 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143
+					<0 0 0 2 &intc 0 0 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144
+					<0 0 0 3 &intc 0 0 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145
+					<0 0 0 4 &intc 0 0 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -853,7 +850,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@20000000 {
+		pcie0: pcie@20000000 {
 			compatible = "qcom,pcie-ipq8074-gen3";
 			reg = <0x20000000 0xf1d>,
 			      <0x20000f20 0xa8>,
@@ -869,7 +866,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy0>;
+			phys = <&pcie_qmp0>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
@@ -879,13 +876,13 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
+			interrupt-map = <0 0 0 1 &intc 0 0 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
+					<0 0 0 2 &intc 0 0 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
+					<0 0 0 3 &intc 0 0 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
+					<0 0 0 4 &intc 0 0 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
new file mode 100644
index 000000000..91e104b0f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP board common device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "ipq9574.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
index 2b093e026..f4f9199d4 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -8,58 +8,12 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
 	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -74,10 +28,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -110,15 +60,4 @@
 			bias-pull-down;
 		};
 	};
-
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 877026ccc..1bb8d96c9 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -8,69 +8,11 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
 	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	regulator_fixed_3p3: s3300 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_3p3";
-	};
-
-	regulator_fixed_0p925: s0925 {
-		compatible = "regulator-fixed";
-		regulator-min-microvolt = <925000>;
-		regulator-max-microvolt = <925000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-name = "fixed_0p925";
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-
-		mp5496_l2: l2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
 };
 
 &sdhc_1 {
@@ -85,10 +27,6 @@
 	status = "okay";
 };
 
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
 &tlmm {
 	sdc_default_state: sdc-default-state {
 		clk-pins {
@@ -122,30 +60,3 @@
 		};
 	};
 };
-
-&usb_0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_0_qmpphy {
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-supply = <&regulator_fixed_0p925>;
-
-	status = "okay";
-};
-
-&usb_0_qusbphy {
-	vdd-supply = <&regulator_fixed_0p925>;
-	vdda-pll-supply = <&mp5496_l2>;
-	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
-
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
-};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
index c8fa54e1a..d36d10787 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
 	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
index f01de6628..c30c9fbed 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -8,73 +8,10 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
 	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
 
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
index 6efae3426..0dc382f5d 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -8,73 +8,9 @@
 
 /dts-v1/;
 
-#include "ipq9574.dtsi"
+#include "ipq9574-rdp-common.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
 	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&blsp1_spi0 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash@0 {
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&uart2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-mp5496-regulators";
-
-		ipq9574_s1: s1 {
-		/*
-		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
-		 * During regulator registration, kernel not knowing the initial voltage,
-		 * considers it as zero and brings up the regulators with minimum supported voltage.
-		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
-		 * the regulators are brought up with 725mV which is sufficient for all the
-		 * corner parts to operate at 800MHz
-		 */
-			regulator-min-microvolt = <725000>;
-			regulator-max-microvolt = <1075000>;
-		};
-	};
-};
-
-&sleep_clk {
-	clock-frequency = <32000>;
-};
-
-&tlmm {
-	spi_0_pins: spi-0-state {
-		pins = "gpio11", "gpio12", "gpio13", "gpio14";
-		function = "blsp0_spi";
-		drive-strength = <8>;
-		bias-disable;
-	};
-};
-
-&xo_board_clk {
-	clock-frequency = <24000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 8a72ad4af..5f83ee42a 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -106,42 +106,56 @@
 	};
 
 	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
+		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
 
 		opp-936000000 {
 			opp-hz = /bits/ 64 <936000000>;
 			opp-microvolt = <725000>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1104000000 {
 			opp-hz = /bits/ 64 <1104000000>;
 			opp-microvolt = <787500>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <862500>;
+			opp-supported-hw = <0xf>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1416000000 {
 			opp-hz = /bits/ 64 <1416000000>;
 			opp-microvolt = <862500>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 			opp-microvolt = <925000>;
+			opp-supported-hw = <0x7>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <987500>;
+			opp-supported-hw = <0x5>;
 			clock-latency-ns = <200000>;
 		};
 
 		opp-2208000000 {
 			opp-hz = /bits/ 64 <2208000000>;
 			opp-microvolt = <1062500>;
+			opp-supported-hw = <0x1>;
 			clock-latency-ns = <200000>;
 		};
 	};
@@ -223,6 +237,11 @@
 			reg = <0x000a4000 0x5a1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@15 {
+				reg = <0x15 0x2>;
+				bits = <7 2>;
+			};
 		};
 
 		cryptobam: dma-controller@704000 {
@@ -652,8 +671,8 @@
 				     "qcom,ipq6018-apcs-apps-global";
 			reg = <0x0b111000 0x1000>;
 			#clock-cells = <1>;
-			clocks = <&a73pll>, <&xo_board_clk>;
-			clock-names = "pll", "xo";
+			clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
+			clock-names = "pll", "xo", "gpll0";
 			#mbox-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
index 84723c9b7..b32c7a973 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -83,6 +84,29 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -155,6 +179,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -163,6 +195,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 47da73866..345914551 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -22,6 +24,19 @@
 		stdout-path = "serial0";
 	};
 
+	reserved-memory {
+		/delete-node/ reserved@86680000;
+		/delete-node/ rmtfs@86700000;
+
+		rmtfs: rmtfs@86680000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86680000 0x0 0x160000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -50,6 +65,17 @@
 		};
 	};
 
+	reg_headphones_avdd: regulator-headphones-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "headphones_avdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&headphones_avdd_default>;
+		pinctrl-names = "default";
+	};
+
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
@@ -58,8 +84,41 @@
 	};
 };
 
-&blsp_uart2 {
+&blsp_i2c3 {
 	status = "okay";
+
+	headphones: audio-codec@10 {
+		compatible = "asahi-kasei,ak4375";
+		reg = <0x10>;
+		avdd-supply = <&reg_headphones_avdd>;
+		tvdd-supply = <&pm8916_l6>;
+		pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&headphones_pdn_default>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_top: audio-codec@34 {
+		compatible = "nxp,tfa9897";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_top_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Top";
+		#sound-dai-cells = <0>;
+	};
+
+	speaker_codec_bottom: audio-codec@36 {
+		compatible = "nxp,tfa9897";
+		reg = <0x36>;
+		vddd-supply = <&pm8916_l6>;
+		rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&speaker_bottom_default>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Bottom";
+		#sound-dai-cells = <0>;
+	};
 };
 
 &blsp_i2c4 {
@@ -153,6 +212,22 @@
 	};
 };
 
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -169,6 +244,17 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@18 {
+		reg = <SECONDARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -183,6 +269,54 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/* Add pin switches for speakers to allow disabling them individually */
+	model = "alcatel-idol3";
+	widgets =
+		"Speaker", "Speaker Top",
+		"Speaker", "Speaker Bottom";
+	pin-switches = "Speaker Top", "Speaker Bottom";
+	audio-routing =
+		"Speaker Top", "Speaker Top OUT",
+		"Speaker Bottom", "Speaker Bottom OUT",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>;
+		};
+	};
+};
+
+&sound_link_backend0 {
+	/* Primary MI2S is not used, replace with Secondary MI2S for headphones */
+	link-name = "Secondary MI2S";
+
+	cpu {
+		sound-dai = <&q6afedai SECONDARY_MI2S_RX>;
+	};
+	platform {
+		sound-dai = <&q6routing>;
+	};
+	codec {
+		sound-dai = <&headphones>;
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -192,6 +326,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -200,6 +342,19 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
+/* Only some of the pins are used */
+&pri_mi2s_default {
+	pins = "gpio113", "gpio115";
+};
+
+&pri_mi2s_sleep {
+	pins = "gpio113", "gpio115";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio31";
@@ -233,6 +388,20 @@
 		bias-disable;
 	};
 
+	headphones_avdd_default: headphones-avdd-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	headphones_pdn_default: headphones-pdn-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	/*
 	 * The OEM wired an additional GPIO to be asserted so that
 	 * the si-en,sn3190 LED IC works. Since this GPIO is not
@@ -279,6 +448,20 @@
 		bias-disable;
 	};
 
+	speaker_bottom_default: speaker-bottom-default-state {
+		pins = "gpio111";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_top_default: speaker-top-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_reset_default: ts-int-reset-default-state {
 		pins = "gpio13", "gpio100";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index 92f695481..77618c737 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -130,6 +132,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,micbias1-ext-cap;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_rpm_regulators {
 	pm8916_l17: l17 {
 		regulator-min-microvolt = <2850000>;
@@ -151,6 +165,13 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -160,6 +181,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -168,6 +197,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	gpio_keys_default: gpio-keys-default-state {
 		pins = "gpio107", "gpio117";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index 4aeeee24c..b748d140b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -150,6 +150,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -158,6 +166,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	camera_flash_default: camera-flash-default-state {
 		pins = "gpio31", "gpio32";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 484e488a5..bf7fc89dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -328,6 +328,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -336,6 +344,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_irq_default: accel-irq-default-state {
 		pins = "gpio115";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 4efc534b1..3a3e794c0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -3,6 +3,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -23,14 +25,47 @@
 		stdout-path = "serial0";
 	};
 
+	/*
+	 * For some reason, the signed wcnss firmware is not relocatable.
+	 * It must be loaded at 0x8b600000. Unfortunately, this also means that
+	 * mpss_mem does not fit when loaded to the typical address at 0x86800000.
+	 *
+	 * Load wcnss_mem to the fixed address and relocate mpss_mem to the next
+	 * working higher address. For some reason the modem firmware does not
+	 * boot when placed at 0x8a800000 to 0x8e800000.
+	 */
 	reserved-memory {
-		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
-		/delete-node/ wcnss@89300000;
+		/delete-node/ mpss@86800000;
+		/delete-node/ wcnss;
 
 		wcnss_mem: wcnss@8b600000 {
 			reg = <0x0 0x8b600000 0x0 0x600000>;
 			no-map;
 		};
+
+		mpss_mem: mpss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x5000000>;
+			no-map;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4350000>;
+		energy-full-design-microwatt-hours = <9500000>;
+		charge-full-design-microamp-hours = <2500000>;
+
+		ocv-capacity-celsius = <25>;
+		ocv-capacity-table-0 = <4330000 100>, <4265000 95>,
+			<4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>,
+			<4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>,
+			<3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>,
+			<3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>,
+			<3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>,
+			<3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>,
+			<3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>,
+			<3000000 0>;
 	};
 
 	gpio-keys {
@@ -221,6 +256,29 @@
 	status = "okay";
 };
 
+&pm8916_bms {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+	power-supplies = <&pm8916_charger>;
+};
+
+&pm8916_charger {
+	status = "okay";
+
+	monitored-battery = <&battery>;
+
+	qcom,fast-charge-safe-current = <900000>;
+	qcom,fast-charge-safe-voltage = <4300000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -233,10 +291,6 @@
 	};
 };
 
-&pm8916_usbin {
-	status = "okay";
-};
-
 &pm8916_vib {
 	status = "okay";
 };
@@ -250,14 +304,29 @@
 	non-removable;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS Internal1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS Internal3";
+};
+
 &usb {
 	status = "okay";
 	dr_mode = "peripheral";
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
 };
 
 &usb_hs_phy {
-	extcon = <&pm8916_usbin>;
+	extcon = <&pm8916_charger>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
 };
 
 &wcnss {
@@ -268,6 +337,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio116";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index d73294af1..3b7fdb679 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "BQ Aquaris X5 (Longcheer L8910)";
@@ -22,6 +25,16 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+
+		pinctrl-0 = <&spk_ext_pa_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
@@ -74,6 +87,46 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
 &blsp_i2c3 {
 	status = "okay";
 
@@ -107,6 +160,27 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_codec {
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -137,6 +211,28 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker separately.
+	 * The hardware does not provide a way to disable the output via the
+	 * headphone jack when the speaker is enabled.
+	 */
+	model = "bq-paella";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker";
+	audio-routing =
+		"Speaker", "Speaker Amp OUT",
+		"Speaker Amp IN", "HPH_R",
+		"Headphones", "HPH_L",
+		"Headphones", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+	aux-devs = <&speaker_amp>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -146,6 +242,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -154,6 +258,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	button_backlight_default: button-backlight-default-state {
 		pins = "gpio17";
@@ -193,6 +301,13 @@
 		bias-disable;
 	};
 
+	spk_ext_pa_default: spk-ext-pa-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	usb_id_default: usb-id-default-state {
 		pins = "gpio110";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
new file mode 100644
index 000000000..039961622
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices
+ * (or similar SoCs) with audio routed via the QDSP6 services provided by the
+ * modem firmware. The digital/analog codec in the SoC/PMIC is used by default,
+ * but boards can define additional codecs by adding additional backend DAI links.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+&apr {
+	status = "okay";
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&lpass {
+	status = "reserved"; /* Controlled by QDSP6 */
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mba_mem {
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+};
+
+&mpss_mem {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1>;
+	};
+	dai@20 {
+		reg = <TERTIARY_MI2S_TX>;
+		qcom,sd-lines = <0 1>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@1 {
+		reg = <1>;
+		direction = <Q6ASM_DAI_TX>;
+	};
+	dai@2 {
+		reg = <2>;
+		direction = <Q6ASM_DAI_RX>;
+	};
+	dai@3 {
+		reg = <3>;
+		direction = <Q6ASM_DAI_RX>;
+		is-compress-dai;
+	};
+};
+
+&sound {
+	compatible = "qcom,msm8916-qdsp6-sndcard";
+	model = "msm8916";
+
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	frontend0-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	frontend1-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	frontend2-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	frontend3-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	sound_link_backend0: backend0-dai-link {
+		link-name = "Primary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	sound_link_backend1: backend1-dai-link {
+		link-name = "Tertiary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_TX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 019bf7317..293749594 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,10 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -196,6 +199,18 @@
 	};
 };
 
+&blsp_i2c1 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c2 {
 	status = "okay";
 
@@ -239,6 +254,29 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
 &mdss {
 	status = "okay";
 };
@@ -249,6 +287,10 @@
 	pinctrl-1 = <&mdss_sleep>;
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -261,6 +303,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -275,6 +324,32 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
@@ -284,6 +359,14 @@
 	extcon = <&muic>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index e5a569698..3b934f5eb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -49,11 +49,6 @@
 	};
 };
 
-&touchkey {
-	vcc-supply = <&reg_touch_key>;
-	vdd-supply = <&reg_key_led>;
-};
-
 &accelerometer {
 	mount-matrix = "0", "1", "0",
 		       "1", "0", "0",
@@ -108,6 +103,11 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
 &vibrator {
 	status = "okay";
 };
@@ -120,6 +120,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	panel_vdd3_default: panel-vdd3-default-state {
 		pins = "gpio9";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 388482a1e..391befa22 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -71,6 +71,10 @@
 	compatible = "qcom,wcn3660b";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 6f65fd4b3..3c49dac92 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -65,6 +65,10 @@
 	};
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &reg_motor_vdd {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
@@ -83,6 +87,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	tkey_en_default: tkey-en-default-state {
 		pins = "gpio97";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 3f145dde4..5882b3a59 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -49,6 +49,10 @@
 	status = "disabled";
 };
 
+&sound {
+	model = "samsung-gmax"; /* No secondary microphone */
+};
+
 &tlmm {
 	gpio_leds_default: gpio-led-default-state {
 		pins = "gpio60";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
index 54d648972..fbd2caf40 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -3,9 +3,12 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	aliases {
@@ -65,25 +68,6 @@
 	};
 };
 
-&blsp_i2c4 {
-	status = "okay";
-
-	fuelgauge@36 {
-		compatible = "maxim,max77849-battery";
-		reg = <0x36>;
-
-		maxim,rsns-microohm = <10000>;
-		maxim,over-heat-temp = <600>;
-		maxim,over-volt = <4400>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-0 = <&fuelgauge_int_default>;
-		pinctrl-names = "default";
-	};
-};
-
 &blsp_i2c2 {
 	status = "okay";
 
@@ -112,10 +96,52 @@
 	};
 };
 
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &blsp_uart2 {
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5400000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -133,6 +159,13 @@
 	status = "okay";
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -147,6 +180,27 @@
 	status = "okay";
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	dr_mode = "peripheral";
 	extcon = <&pm8916_usbin>;
@@ -158,6 +212,14 @@
 	extcon = <&pm8916_usbin>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -166,6 +228,10 @@
 	compatible = "qcom,wcn3660b";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
index 48111c6a2..5b34529b8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -9,6 +9,14 @@
 	compatible = "samsung,gt510", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	speaker_codec: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		pinctrl-0 = <&audio_sdmode_default>;
+		pinctrl-names = "default";
+	};
+
 	clk_pwm: pwm {
 		compatible = "clk-pwm";
 		#pwm-cells = <2>;
@@ -19,6 +27,19 @@
 		pinctrl-names = "default";
 	};
 
+	reg_lcd_vmipi: regulator-lcd-vmipi {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_vmipi";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&lcd_en_default>;
+		pinctrl-names = "default";
+	};
+
 	reg_motor_vdd: regulator-motor-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "motor_vdd";
@@ -55,6 +76,19 @@
 		enable-active-high;
 	};
 
+	reg_vlcd_5p4v: regulator-vlcd-5p4v {
+		compatible = "regulator-fixed";
+		regulator-name = "vlcd_5p4v";
+		regulator-min-microvolt = <5400000>;
+		regulator-max-microvolt = <5400000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&buckbooster_en_default>;
+		pinctrl-names = "default";
+	};
+
 	vibrator {
 		compatible = "pwm-vibrator";
 
@@ -81,10 +115,67 @@
 
 		pinctrl-0 = <&tsp_int_rst_default>;
 		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	panel@0 {
+		compatible = "samsung,ltl101at01", "samsung,s6d7aa0";
+		reg = <0>;
+
+		power-supply = <&reg_vlcd_5p4v>;
+		vmipi-supply = <&reg_lcd_vmipi>;
+		reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&sound {
+	model = "samsung-gt510";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	audio_sdmode_default: audio-sdmode-default-state {
+		pins = "gpio55";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	buckbooster_en_default: buckbooster-en-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	motor_en_default: motor-en-default-state {
 		pins = "gpio76";
 		function = "gpio";
@@ -97,6 +188,27 @@
 		function = "gcc_gp2_clk_a";
 	};
 
+	lcd_en_default: lcd-en-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_default: mdss-default-state {
+		pins = "gpio97";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio97";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	tsp_en_default: tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
index 98ceaad7f..579312ed5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -9,6 +9,19 @@
 	compatible = "samsung,gt58", "qcom,msm8916";
 	chassis-type = "tablet";
 
+	reg_5p4v: regulator-5p4v {
+		compatible = "regulator-fixed";
+		regulator-name = "vlcd_5p4v";
+		regulator-min-microvolt = <5400000>;
+		regulator-max-microvolt = <5400000>;
+
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&buckbooster_en_default>;
+		pinctrl-names = "default";
+	};
+
 	reg_vdd_tsp: regulator-vdd-tsp {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_tsp";
@@ -22,6 +35,26 @@
 		pinctrl-names = "default";
 	};
 
+	i2c-amplifier {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&amp_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		speaker_codec: audio-codec@34 {
+			compatible = "nxp,tfa9895";
+			reg = <0x34>;
+			vddd-supply = <&pm8916_l5>;
+			sound-name-prefix = "Speaker";
+			#sound-dai-cells = <0>;
+		};
+	};
+
 	vibrator {
 		compatible = "gpio-vibrator";
 		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
@@ -51,7 +84,76 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	panel@0 {
+		compatible = "samsung,lsl080al03", "samsung,s6d7aa0";
+		reg = <0>;
+
+		power-supply = <&reg_5p4v>;
+		vmipi-supply = <&pm8916_l5>;
+		reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&sound {
+	model = "samsung-a2015";
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
+	pinctrl-names = "default", "sleep";
+};
+
 &tlmm {
+	amp_i2c_default: amp-i2c-default-state {
+		pins = "gpio55", "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	buckbooster_en_default: buckbooster-en-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_default: mdss-default-state {
+		pins = "gpio97";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio97";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	reg_tsp_en_default: reg-tsp-en-default-state {
 		pins = "gpio73";
 		function = "gpio";
@@ -59,6 +161,14 @@
 		bias-disable;
 	};
 
+	secondary_mic_default: secondary-mic-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
index cb0e4a7fa..5ca2ada26 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -84,6 +86,31 @@
 			pinctrl-0 = <&muic_int_default>;
 		};
 	};
+
+	i2c_sensors: i2c-sensors {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&sensors_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		accelerometer: accelerometer@1d {
+			compatible = "st,lis2hh12";
+			reg = <0x1d>;
+
+			interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-0 = <&accel_int_default>;
+			pinctrl-names = "default";
+
+			st,drdy-int-pin = <1>;
+		};
+	};
 };
 
 &blsp_i2c5 {
@@ -110,6 +137,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -129,6 +160,14 @@
 	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	model = "msm8916-1mic";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
@@ -138,6 +177,14 @@
 	extcon = <&muic>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -146,7 +193,18 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
 		pins = "gpio52";
 		function = "gpio";
@@ -187,6 +245,13 @@
 		bias-disable;
 	};
 
+	sensors_i2c_default: sensors-i2c-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tsp_int_default: tsp-int-default-state {
 		pins = "gpio13";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 3e1ff5b4d..ba8650971 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -10,10 +10,19 @@
 	chassis-type = "handset";
 };
 
+&accelerometer {
+	vdd-supply = <&pm8916_l5>;
+	vddio-supply = <&pm8916_l5>;
+};
+
 &blsp_i2c5 {
 	status = "disabled";
 };
 
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+};
+
 &touchscreen {
 	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
index b2fe10972..8b404a9cd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
@@ -23,6 +23,17 @@
 	};
 };
 
+&accelerometer {
+	interrupts-extended = <&tlmm 49 IRQ_TYPE_LEVEL_HIGH>;
+
+	vdd-supply = <&pm8916_l6>;
+	vddio-supply = <&pm8916_l6>;
+
+	mount-matrix = "0", "-1", "0",
+		       "1", "0", "0",
+		       "0", "0", "-1";
+};
+
 &muic {
 	interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
 };
@@ -40,6 +51,10 @@
 	};
 };
 
+&accel_int_default {
+	pins = "gpio49";
+};
+
 &muic_int_default {
 	pins = "gpio121";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index eaf877378..5ce8f1350 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -319,6 +321,10 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5a00000>;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -350,6 +356,13 @@
 	no-1-8-v;
 };
 
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+};
+
 &usb {
 	status = "okay";
 	extcon = <&muic>, <&muic>;
@@ -359,6 +372,14 @@
 	extcon = <&muic>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -367,6 +388,10 @@
 	compatible = "qcom,wcn3660b";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	fg_alert_default: fg-alert-default-state {
 		pins = "gpio121";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
index 6fe1850ba..f34997500 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 16d4a9102..6cb3911ba 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 };
 
-&led_r {
-	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 };
 
 &mpss {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
index 004a129a2..c77ed04bb 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -17,18 +17,6 @@
 		stdout-path = "serial0";
 	};
 
-	reserved-memory {
-		mpss_mem: mpss@86800000 {
-			reg = <0x0 0x86800000 0x0 0x5500000>;
-			no-map;
-		};
-
-		gps_mem: gps@8bd00000 {
-			reg = <0x0 0x8bd00000 0x0 0x200000>;
-			no-map;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -92,10 +80,19 @@
 	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
 };
 
+&mba_mem {
+	status = "okay";
+};
+
 &mpss {
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5500000>;
+	status = "okay";
+};
+
 &pm8916_usbin {
 	status = "okay";
 };
@@ -115,6 +112,14 @@
 	extcon = <&pm8916_usbin>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -123,6 +128,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	/* pins are board-specific */
 	button_default: button-default-state {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 43078b890..510b3b3c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -25,6 +27,28 @@
 		stdout-path = "serial0";
 	};
 
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	/*
+	 * This seems to be actually an analog switch that either routes audio
+	 * to the headphone jack or nowhere. Given that we need to enable a GPIO
+	 * to get sound on headphones, modelling it as simple-audio-amplifier
+	 * works just fine.
+	 */
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
 	flash-led-controller {
 		compatible = "ocs,ocp8110";
 		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
@@ -147,6 +171,18 @@
 	status = "okay";
 };
 
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5100000>;
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
+	qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
 &pm8916_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -181,6 +217,30 @@
 	non-removable;
 };
 
+&sound {
+	/*
+	 * Provide widgets/pin-switches to allow enabling speaker and headphones
+	 * separately. Both are routed via the HPH_L/HPH_R pins of the codec.
+	 */
+	model = "wt88047";
+	widgets =
+		"Speaker", "Speaker",
+		"Headphone", "Headphones";
+	pin-switches = "Speaker", "Headphones";
+	audio-routing =
+		"Speaker", "Speaker Amp OUTL",
+		"Speaker", "Speaker Amp OUTR",
+		"Speaker Amp INL", "HPH_R",
+		"Speaker Amp INR", "HPH_R",
+		"Headphones", "Headphones Switch OUTL",
+		"Headphones", "Headphones Switch OUTR",
+		"Headphones Switch INL", "HPH_L",
+		"Headphones Switch INR", "HPH_R",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2";
+	aux-devs = <&speaker_amp>, <&headphones_switch>;
+};
+
 &usb {
 	status = "okay";
 	extcon = <&usb_id>, <&usb_id>;
@@ -190,6 +250,14 @@
 	extcon = <&usb_id>;
 };
 
+&venus {
+	status = "okay";
+};
+
+&venus_mem {
+	status = "okay";
+};
+
 &wcnss {
 	status = "okay";
 };
@@ -198,6 +266,10 @@
 	compatible = "qcom,wcn3620";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	camera_flash_default: camera-flash-default-state {
 		pins = "gpio31", "gpio32";
@@ -215,6 +287,13 @@
 		bias-pull-up;
 	};
 
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	imu_default: imu-default-state {
 		pins = "gpio115";
 		function = "gpio";
@@ -223,6 +302,13 @@
 		bias-disable;
 	};
 
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touchscreen_default: touchscreen-default-state {
 		touchscreen-pins {
 			pins = "gpio13";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
index 5e6ba8c58..a98efcfe7 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -13,16 +13,16 @@
 	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
 };
 
-&led_r {
-	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 };
 
 &led_g {
 	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
 };
 
-&led_b {
-	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
 };
 
 &button_default {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 961ceb83a..e423c57dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -74,23 +75,43 @@
 		};
 
 		mpss_mem: mpss@86800000 {
-			reg = <0x0 0x86800000 0x0 0x2b00000>;
+			/*
+			 * The memory region for the mpss firmware is generally
+			 * relocatable and could be allocated dynamically.
+			 * However, many firmware versions tend to fail when
+			 * loaded to some special addresses, so it is hard to
+			 * define reliable alloc-ranges.
+			 *
+			 * alignment = <0x0 0x400000>;
+			 * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			 */
+			reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
 			no-map;
+			status = "disabled";
 		};
 
-		wcnss_mem: wcnss@89300000 {
-			reg = <0x0 0x89300000 0x0 0x600000>;
+		wcnss_mem: wcnss {
+			size = <0x0 0x600000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
+			status = "disabled";
 		};
 
-		venus_mem: venus@89900000 {
-			reg = <0x0 0x89900000 0x0 0x600000>;
+		venus_mem: venus {
+			size = <0x0 0x500000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
+			status = "disabled";
 		};
 
-		mba_mem: mba@8ea00000 {
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
-			reg = <0 0x8ea00000 0 0x100000>;
+			status = "disabled";
 		};
 	};
 
@@ -519,9 +540,6 @@
 			compatible = "qcom,msm8916-bimc";
 			reg = <0x00400000 0x62000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -554,18 +572,12 @@
 			compatible = "qcom,msm8916-pcnoc";
 			reg = <0x00500000 0x11000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8916-snoc";
 			reg = <0x00580000 0x14000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		stm: stm@802000 {
@@ -1750,7 +1762,7 @@
 			};
 		};
 
-		gpu@1c00000 {
+		gpu: gpu@1c00000 {
 			compatible = "qcom,adreno-306.0", "qcom,adreno";
 			reg = <0x01c00000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -1773,6 +1785,7 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&gpu_opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			status = "disabled";
 
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -1797,7 +1810,7 @@
 			clock-names = "core", "iface", "bus";
 			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
-			status = "okay";
+			status = "disabled";
 
 			video-decoder {
 				compatible = "venus-decoder";
@@ -1968,6 +1981,54 @@
 
 				label = "hexagon";
 
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
 				fastrpc {
 					compatible = "qcom,fastrpc";
 					qcom,smd-channels = "fastrpcsmd-apps-dsp";
diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
new file mode 100644
index 000000000..3cec51891
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Huawei Honor 5X / GR5 (2016)";
+	compatible = "huawei,kiwi", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1600000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <25000>;
+		amstaos,proximity-diodes = <0>;
+
+		pinctrl-0 = <&prox_irq_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@1c {
+		compatible = "cypress,tt21000";
+
+		reg = <0x1c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a
+		 * fixed regulator that is automatically enabled by pm8916_l16.
+		 */
+		vdd-supply = <&pm8916_l16>;
+		vddio-supply = <&pm8916_l16>;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
new file mode 100644
index 000000000..e3404c445
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+	model = "BQ Aquaris M5 (Longcheer L9100)";
+	compatible = "longcheer,l9100", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+
+			pinctrl-0 = <&button_backlight_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_ts_vdd: regulator-vdd-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-vdd-ts";
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&ts_vdd_default>;
+		pinctrl-names = "default";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8916_pwm 0 100000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&lcd_bl_en_default>;
+		pinctrl-names = "default";
+	};
+
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_front_flash_default>;
+		pinctrl-names = "default";
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
+		pinctrl-names = "default";
+	};
+
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&status_led_default>;
+		pinctrl-names = "default";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&mag_reset_default>;
+		pinctrl-names = "default";
+	};
+
+	light-sensor@23 {
+		compatible = "liteon,ltr559";
+		reg = <0x23>;
+		proximity-near-level = <75>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&light_int_default>;
+		pinctrl-names = "default";
+	};
+
+	imu@68 {
+		compatible = "bosch,bmi160";
+		reg = <0x68>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vdda-supply = <&pm8916_l6>;
+		vdd-supply = <&reg_ts_vdd>;
+
+		pinctrl-0 = <&ts_int_reset_default>;
+		pinctrl-names = "default";
+
+		/* Keys listed from right to left */
+		linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_gpios {
+	status_led_default: status-led-default-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <PM8916_GPIO_VPH>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&pm8916_mpps {
+	pwm_out: mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+		power-source = <PM8916_MPP_VPH>;
+		output-low;
+		qcom,dtest = <1>;
+	};
+};
+
+&pm8916_pwm {
+	pinctrl-0 = <&pwm_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&tlmm {
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	camera_front_flash_default: camera-front-flash-default-state {
+		pins = "gpio8", "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	lcd_bl_en_default: lcd-bl-en-default-state {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	light_int_default: light-int-default-state {
+		pins = "gpio113";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_reset_default: ts-int-reset-default-state {
+		pins = "gpio12", "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_vdd_default: ts-vdd-default-state {
+		pins = "gpio78";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	usb_id_switch_default: usb-id-switch-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
index ba652909d..aa6c39482 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -3,10 +3,12 @@
 /dts-v1/;
 
 #include "msm8939-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
 
 / {
 	model = "Samsung Galaxy A7 (2015)";
@@ -287,6 +289,18 @@
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@34 {
+		compatible = "nxp,tfa9895";
+		reg = <0x34>;
+		vddd-supply = <&pm8916_l5>;
+		sound-name-prefix = "Speaker";
+		#sound-dai-cells = <0>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -309,6 +323,29 @@
 	status = "okay";
 };
 
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+	dai-link@3 {
+		reg = <MI2S_QUATERNARY>;
+		qcom,playback-sd-lines = <1>;
+	};
+};
+
+&mpss_mem {
+	reg = <0x0 0x86800000 0x0 0x5800000>;
+};
+
 &pm8916_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
@@ -321,6 +358,13 @@
 	};
 };
 
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+};
+
 &sdhc_1 {
 	status = "okay";
 };
@@ -335,6 +379,32 @@
 	status = "okay";
 };
 
+&sound {
+	model = "samsung-a2015";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	sound_link_backend2: backend2-dai-link {
+		link-name = "Quaternary MI2S";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+		codec {
+			sound-dai = <&speaker_codec>;
+		};
+	};
+};
+
 &usb {
 	extcon = <&muic>, <&muic>;
 	status = "okay";
@@ -352,6 +422,10 @@
 	compatible = "qcom,wcn3660b";
 };
 
+&wcnss_mem {
+	status = "okay";
+};
+
 &tlmm {
 	accel_int_default: accel-int-default-state {
 		pins = "gpio115";
diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
index 89b6aebba..eeb4d578c 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
@@ -39,6 +39,10 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -87,3 +91,7 @@
 &wcnss_iris {
 	compatible = "qcom,wcn3660";
 };
+
+&wcnss_mem {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 3fd64cafe..82d85ff61 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -346,23 +347,43 @@
 		};
 
 		mpss_mem: mpss@86800000 {
-			reg = <0x0 0x86800000 0x0 0x5500000>;
+			/*
+			 * The memory region for the mpss firmware is generally
+			 * relocatable and could be allocated dynamically.
+			 * However, many firmware versions tend to fail when
+			 * loaded to some special addresses, so it is hard to
+			 * define reliable alloc-ranges.
+			 *
+			 * alignment = <0x0 0x400000>;
+			 * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			 */
+			reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
 			no-map;
+			status = "disabled";
 		};
 
-		wcnss_mem: wcnss@8bd00000 {
-			reg = <0x0 0x8bd00000 0x0 0x600000>;
+		wcnss_mem: wcnss {
+			size = <0x0 0x600000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
+			status = "disabled";
 		};
 
-		venus_mem: venus@8c300000 {
-			reg = <0x0 0x8c300000 0x0 0x800000>;
+		venus_mem: venus {
+			size = <0x0 0x500000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
+			status = "disabled";
 		};
 
-		mba_mem: mba@8cb00000 {
-			reg = <0x0 0x8cb00000 0x0 0x100000>;
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
 			no-map;
+			status = "disabled";
 		};
 	};
 
@@ -581,9 +602,6 @@
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -627,25 +645,16 @@
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};
@@ -1395,7 +1404,7 @@
 			};
 		};
 
-		gpu@1c00000 {
+		gpu: gpu@1c00000 {
 			compatible = "qcom,adreno-405.0", "qcom,adreno";
 			reg = <0x01c00000 0x10000>;
 			reg-names = "kgsl_3d0_reg_memory";
@@ -1418,6 +1427,7 @@
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&opp_table>;
 			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+			status = "disabled";
 
 			opp_table: opp-table {
 				compatible = "operating-points-v2";
@@ -1516,6 +1526,20 @@
 			#interrupt-cells = <4>;
 		};
 
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
 		mpss: remoteproc@4080000 {
 			compatible = "qcom,msm8916-mss-pil";
 			reg = <0x04080000 0x100>, <0x04020000 0x040>;
@@ -1548,6 +1572,22 @@
 			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
 			status = "disabled";
 
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
 			mba {
 				memory-region = <&mba_mem>;
 			};
@@ -1564,6 +1604,54 @@
 				qcom,remote-pid = <1>;
 
 				label = "hexagon";
+
+				apr: apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+
+					q6core: service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
 			};
 		};
 
@@ -2096,6 +2184,8 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			/* Necessary because firmware does not configure this correctly */
+			clock-frequency = <19200000>;
 
 			frame@b121000 {
 				reg = <0x0b121000 0x1000>,
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index e7de76326..ad2f8cf9c 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -174,10 +174,10 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
+		reg = <0 0x10000000 0 0>;
 	};
 
 	pmu {
@@ -726,6 +726,48 @@
 				bias-disable;
 			};
 
+			spi_3_default: spi-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_spi3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_3_sleep: spi-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_default: spi-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_spi5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_5_sleep: spi-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_default: spi-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_spi6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			spi_6_sleep: spi-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			wcnss_pin_a: wcnss-active-state {
 
 				wcss-wlan2-pins {
@@ -1004,7 +1046,7 @@
 
 		apps_iommu: iommu@1e20000 {
 			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
-			ranges  = <0 0x01e20000 0x20000>;
+			ranges = <0 0x01e20000 0x20000>;
 
 			clocks = <&gcc GCC_SMMU_CFG_CLK>,
 				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -1360,6 +1402,26 @@
 			status = "disabled";
 		};
 
+		spi_3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_3_default>;
+			pinctrl-1 = <&spi_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x078b8000 0x600>;
@@ -1413,6 +1475,26 @@
 			status = "disabled";
 		};
 
+		spi_5: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_5_default>;
+			pinctrl-1 = <&spi_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_6: i2c@7af6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af6000 0x600>;
@@ -1433,6 +1515,26 @@
 			status = "disabled";
 		};
 
+		spi_6: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_6_default>;
+			pinctrl-1 = <&spi_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_7: i2c@7af7000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af7000 0x600>;
@@ -1645,7 +1747,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 4c5be22b4..d2bb1ada3 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -338,7 +338,12 @@
 		};
 
 		lpass_mem: lpass@8c200000 {
-			reg = <0x0 0x8c200000 0x0 0x1800000>;
+			reg = <0x0 0x8c200000 0x0 0x1000000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8d200000 {
+			reg = <0x0 0x8d200000 0x0 0x800000>;
 			no-map;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 5fe5de9ce..133f9c254 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -15,6 +15,7 @@
 /delete-node/ &audio_mem;
 /delete-node/ &mpss_mem;
 /delete-node/ &peripheral_region;
+/delete-node/ &res_hyp_mem;
 /delete-node/ &rmtfs_mem;
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index 2861bcdf8..cbc84459a 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -23,6 +23,7 @@
 /delete-node/ &mba_mem;
 /delete-node/ &mpss_mem;
 /delete-node/ &peripheral_region;
+/delete-node/ &res_hyp_mem;
 /delete-node/ &rmtfs_mem;
 /delete-node/ &smem_mem;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index c32625715..8295bf1b2 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -281,7 +281,7 @@
 			no-map;
 		};
 
-		reserved@6c00000 {
+		res_hyp_mem: reserved@6c00000 {
 			reg = <0 0x06c00000 0 0x400000>;
 			no-map;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index ec5457508..38035e0db 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -772,7 +772,6 @@
 &ufsphy {
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
 
 	status = "okay";
 };
@@ -781,6 +780,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l25a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l25a_1p2>;
 
 	vcc-max-microamp = <600000>;
 	vccq-max-microamp = <450000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 06f8ff624..5ab583be9 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -115,7 +115,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		/delete-node/ mba@91500000;
@@ -417,6 +417,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l25a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l25a_1p2>;
 
 	vcc-max-microamp = <600000>;
 	vccq-max-microamp = <450000>;
@@ -428,7 +429,6 @@
 
 	vdda-phy-supply = <&vreg_l28a_0p925>;
 	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
 };
 
 &venus {
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c8e098642..ee6f87c82 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8996.h>
 #include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -443,6 +444,19 @@
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
+	etm {
+		compatible = "qcom,coresight-remote-etm";
+
+		out-ports {
+			port {
+				modem_etm_out_funnel_in2: endpoint {
+					remote-endpoint =
+					  <&funnel_in2_in_modem_etm>;
+				};
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -538,7 +552,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		mpss_mem: mpss@88800000 {
@@ -778,10 +792,10 @@
 				 <&pciephy_0>,
 				 <&pciephy_1>,
 				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
+				 <&usb3phy>,
+				 <&ufsphy 0>,
+				 <&ufsphy 1>,
+				 <&ufsphy 2>;
 			clock-names = "cxo",
 				      "cxo2",
 				      "sleep_clk",
@@ -798,9 +812,6 @@
 			compatible = "qcom,msm8996-bimc";
 			reg = <0x00408000 0x5a000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -851,18 +862,12 @@
 			compatible = "qcom,msm8996-cnoc";
 			reg = <0x00500000 0x1000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@524000 {
 			compatible = "qcom,msm8996-snoc";
 			reg = <0x00524000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		a0noc: interconnect@543000 {
@@ -882,19 +887,14 @@
 			compatible = "qcom,msm8996-a1noc";
 			reg = <0x00562000 0x5000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
 		};
 
 		a2noc: interconnect@583000 {
 			compatible = "qcom,msm8996-a2noc";
 			reg = <0x00583000 0x7000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+			clock-names = "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>;
 		};
 
@@ -902,19 +902,14 @@
 			compatible = "qcom,msm8996-mnoc";
 			reg = <0x005a4000 0x1c000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		pnoc: interconnect@5c0000 {
 			compatible = "qcom,msm8996-pnoc";
 			reg = <0x005c0000 0x3000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 		};
 
 		tcsr_mutex: hwlock@740000 {
@@ -2046,7 +2041,7 @@
 			reg = <0x00624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy_lane>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 
 			power-domains = <&gcc UFS_GDSC>;
@@ -2099,25 +2094,18 @@
 
 		ufsphy: phy@627000 {
 			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x00627000 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
 			clock-names = "ref";
 
 			resets = <&ufshc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufsphy_lane: phy@627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		camss: camss@a34000 {
@@ -2452,9 +2440,8 @@
 					  "handover",
 					  "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2499,10 +2486,15 @@
 				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
 				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
 				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
 				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss";
 
 			resets = <&gcc GCC_MSS_RESTART>;
 			reset-names = "mss_restart";
@@ -2643,6 +2635,14 @@
 			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			in-ports {
+				port {
+					funnel_in2_in_modem_etm: endpoint {
+						remote-endpoint =
+						  <&modem_etm_out_funnel_in2>;
+					};
+				};
+			};
 
 			out-ports {
 				port {
@@ -3055,7 +3055,7 @@
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phys = <&hsusb_phy1>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,hird-threshold = /bits/ 8 <0>;
 				snps,dis_u2_susphy_quirk;
@@ -3067,32 +3067,26 @@
 
 		usb3phy: phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x07410000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_CLKREF_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy@7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
+			status = "disabled";
 		};
 
 		hsusb_phy1: phy@7411000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index b6a214bea..f1ceaedd9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -671,6 +671,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l26a_1p2>;
 	vcc-max-microamp = <750000>;
 	vccq-max-microamp = <560000>;
 	vccq2-max-microamp = <750000>;
@@ -680,7 +681,6 @@
 	status = "okay";
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
-	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
 };
 
 &usb3 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index 4319f4da8..7c77612fb 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -412,6 +412,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l26a_1p2>;
 	vcc-max-microamp = <750000>;
 	vccq-max-microamp = <560000>;
 	vccq2-max-microamp = <750000>;
@@ -421,7 +422,6 @@
 	status = "okay";
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
-	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
 };
 
 &usb3 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 68e634f82..e6a69d942 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -534,6 +534,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l26a_1p2>;
 	vcc-max-microamp = <750000>;
 	vccq-max-microamp = <560000>;
 	vccq2-max-microamp = <750000>;
@@ -544,7 +545,6 @@
 
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
-	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
 };
 
 &usb3 {
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
index 437b30cc8..0cac06f25 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -667,6 +667,7 @@
 	vcc-supply = <&vreg_l20a_2p95>;
 	vccq-supply = <&vreg_l26a_1p2>;
 	vccq2-supply = <&vreg_s4a_1p8>;
+	vdd-hba-supply = <&vreg_l26a_1p2>;
 	vcc-max-microamp = <750000>;
 	vccq-max-microamp = <560000>;
 	vccq2-max-microamp = <750000>;
@@ -676,7 +677,6 @@
 &ufsphy {
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
-	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f180047ca..2793cc22d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -56,7 +57,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		spss_mem: memory@8ab00000 {
@@ -932,7 +933,7 @@
 				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
 			reg = <0x01c00000 0x2000>,
 			      <0x1b000000 0xf1d>,
@@ -945,7 +946,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			num-lanes = <1>;
-			phys = <&pciephy>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 			status = "disabled";
 
@@ -975,39 +976,35 @@
 
 		pcie_phy: phy@1c06000 {
 			compatible = "qcom,msm8998-qmp-pcie-phy";
-			reg = <0x01c06000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			reg = <0x01c06000 0x1000>;
 			status = "disabled";
-			ranges;
 
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_PCIE_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
 			reset-names = "phy", "common";
 
 			vdda-phy-supply = <&vreg_l1a_0p875>;
 			vdda-pll-supply = <&vreg_l2a_1p2>;
-
-			pciephy: phy@1c06800 {
-				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "pcie_0_pipe_clk_src";
-				#clock-cells = <0>;
-			};
 		};
 
 		ufshc: ufshc@1da4000 {
 			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x01da4000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufsphy_lanes>;
+			phys = <&ufsphy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_GDSC>;
@@ -1048,11 +1045,7 @@
 
 		ufsphy: phy@1da7000 {
 			compatible = "qcom,msm8998-qmp-ufs-phy";
-			reg = <0x01da7000 0x18c>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges;
+			reg = <0x01da7000 0x1000>;
 
 			clock-names =
 				"ref",
@@ -1064,14 +1057,8 @@
 			reset-names = "ufsphy";
 			resets = <&ufshc 0>;
 
-			ufsphy_lanes: phy@1da7400 {
-				reg = <0x01da7400 0x128>,
-				      <0x01da7600 0x1fc>,
-				      <0x01da7c00 0x1dc>,
-				      <0x01da7800 0x128>,
-				      <0x01da7a00 0x1fc>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -1618,9 +1605,8 @@
 
 			px-supply = <&vreg_lvs2a_1p8>;
 
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
 
 			memory-region = <&slpi_mem>;
 
@@ -2034,9 +2020,11 @@
 
 			cpu = <&CPU4>;
 
-			port {
-				etm4_out: endpoint {
-					remote-endpoint = <&apss_funnel_in4>;
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
 				};
 			};
 		};
@@ -2051,9 +2039,11 @@
 
 			cpu = <&CPU5>;
 
-			port {
-				etm5_out: endpoint {
-					remote-endpoint = <&apss_funnel_in5>;
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
 				};
 			};
 		};
@@ -2068,9 +2058,11 @@
 
 			cpu = <&CPU6>;
 
-			port {
-				etm6_out: endpoint {
-					remote-endpoint = <&apss_funnel_in6>;
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
 				};
 			};
 		};
@@ -2085,9 +2077,11 @@
 
 			cpu = <&CPU7>;
 
-			port {
-				etm7_out: endpoint {
-					remote-endpoint = <&apss_funnel_in7>;
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
 				};
 			};
 		};
@@ -2152,7 +2146,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2161,33 +2155,26 @@
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm4125.dtsi
index 5f1d15db5..d886a9e4b 100644
--- a/arch/arm64/boot/dts/qcom/pm2250.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm4125.dtsi
@@ -19,7 +19,7 @@
 			compatible = "qcom,pm8916-pon";
 			reg = <0x800>;
 
-			pm2250_pwrkey: pwrkey {
+			pm4125_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
@@ -27,7 +27,7 @@
 				bias-pull-up;
 			};
 
-			pm2250_resin: resin {
+			pm4125_resin: resin {
 				compatible = "qcom,pm8941-resin";
 				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
@@ -43,11 +43,11 @@
 			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		pm2250_gpios: gpio@c000 {
+		pm4125_gpios: gpio@c000 {
 			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			gpio-ranges = <&pm4125_gpios 0 0 10>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 7d4d1f276..ddbaf7280 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@
 			status = "disabled";
 		};
 
+		pm6150_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index e8540c36b..3bf7cf5d1 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -39,16 +39,16 @@
 };
 
 &spmi_bus {
-	pmic@2 {
+	pmic@PM7250B_SID {
 		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
-		reg = <0x2 SPMI_USID>;
+		reg = <PM7250B_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm7250b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
-			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PM7250B_SID 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 			io-channels = <&pm7250b_adc ADC5_DIE_TEMP>;
 			io-channel-names = "thermal";
 			#thermal-sensor-cells = <0>;
@@ -60,7 +60,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
-			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PM7250B_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
 			channel@0 {
 				reg = <ADC5_REF_GND>;
@@ -141,14 +141,14 @@
 		pm7250b_adc_tm: adc-tm@3500 {
 			compatible = "qcom,spmi-adc-tm5";
 			reg = <0x3500>;
-			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <PM7250B_SID 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 			#thermal-sensor-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
 		};
 
-		pm7250b_gpios: pinctrl@c000 {
+		pm7250b_gpios: gpio@c000 {
 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -159,9 +159,9 @@
 		};
 	};
 
-	pmic@3 {
+	pmic@PM7250B_SID1 {
 		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
-		reg = <0x3 SPMI_USID>;
+		reg = <PM7250B_SID1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 2b9123df5..1aee3270c 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -59,6 +59,46 @@
 			reg = <0x1100>;
 		};
 
+		pm8150b_typec: typec@1500 {
+			compatible = "qcom,pm8150b-typec";
+			status = "disabled";
+			reg = <0x1500>,
+			      <0x1700>;
+			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "or-rid-detect-change",
+					  "vpd-detect",
+					  "cc-state-change",
+					  "vconn-oc",
+					  "vbus-change",
+					  "attach-detach",
+					  "legacy-cable-detect",
+					  "try-snk-src-detect",
+					  "sig-tx",
+					  "sig-rx",
+					  "msg-tx",
+					  "msg-rx",
+					  "msg-tx-failed",
+					  "msg-tx-discarded",
+					  "msg-rx-discarded",
+					  "fr-swap";
+			vdd-vbus-supply = <&pm8150b_vbus>;
+		};
+
 		pm8150b_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index b1686e577..ac08a09c6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -132,5 +132,15 @@
 			status = "disabled";
 		};
 
+		pm8150l_wled: leds@d800 {
+			compatible = "qcom,pm8150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index f28e71487..aa74e21fe 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -30,6 +30,12 @@
 			#interrupt-cells = <2>;
 		};
 
+		pm8350c_flash: led-controller@ee00 {
+			compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+
 		pm8350c_pwm: pwm {
 			compatible = "qcom,pm8350c-pwm";
 			#pwm-cells = <2>;
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index db3d5c17a..797a18c24 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -64,9 +64,6 @@
 
 		pm8550_pwm: pwm {
 			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
 			#pwm-cells = <2>;
 
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index c47646a46..4dc1f03ab 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -33,16 +33,16 @@
 
 
 &spmi_bus {
-	pm8550ve: pmic@5 {
+	pm8550ve: pmic@PMK8550VE_SID {
 		compatible = "qcom,pm8550", "qcom,spmi-pmic";
-		reg = <0x5 SPMI_USID>;
+		reg = <PMK8550VE_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8550ve_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0xa00>;
-			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 			#thermal-sensor-cells = <0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 223442f90..4b2e8fb47 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -41,6 +41,35 @@
 			};
 		};
 
+		pm8916_charger: charger@1000 {
+			compatible = "qcom,pm8916-lbc";
+			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
+			reg-names = "chgr", "bat_if", "usb", "misc";
+
+			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "vbat_det",
+					  "fast_chg",
+					  "chg_fail",
+					  "chg_done",
+					  "bat_pres",
+					  "temp_ok",
+					  "coarse_det",
+					  "usb_vbus",
+					  "chg_gone",
+					  "overtemp";
+
+			status = "disabled";
+		};
+
 		pm8916_usbin: usb-detect@1300 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x1300>;
@@ -91,6 +120,25 @@
 			};
 		};
 
+		pm8916_bms: battery@4000 {
+			compatible = "qcom,pm8916-bms-vm";
+			reg = <0x4000>;
+			interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "cv_leave",
+					  "cv_enter",
+					  "ocv_good",
+					  "ocv_thr",
+					  "fifo",
+					  "state_chg";
+
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>, <0x6100>;
@@ -142,9 +190,6 @@
 		pm8916_codec: audio-codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
 			reg = <0xf000>;
-			reg-names = "pmic-codec-core";
-			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-			clock-names = "mclk";
 			interrupt-parent = <&spmi_bus>;
 			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
 				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1eb740170..f0ed15458 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -22,7 +22,7 @@
 		mode-bootloader = <0x02>;
 	};
 };
-	
+
 &spmi_bus {
 	pmk8350: pmic@PMK8350_SID {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 41fb664a1..37daaefe3 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -28,27 +28,6 @@
 				};
 			};
 		};
-
-		pmr735d-l-thermal {
-			polling-delay-passive = <100>;
-			polling-delay = <0>;
-
-			thermal-sensors = <&pmr735d_l_temp_alarm>;
-
-			trips {
-				trip0 {
-					temperature = <95000>;
-					hysteresis = <0>;
-					type = "passive";
-				};
-
-				trip1 {
-					temperature = <115000>;
-					hysteresis = <0>;
-					type = "hot";
-				};
-			};
-		};
 	};
 };
 
@@ -77,28 +56,4 @@
 			#interrupt-cells = <2>;
 		};
 	};
-
-	pmr735d_l: pmic@b {
-		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
-		reg = <0xb SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmr735d_l_temp_alarm: temp-alarm@a00 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0xa00>;
-			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		pmr735d_l_gpios: gpio@8800 {
-			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
-			reg = <0x8800>;
-			gpio-controller;
-			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
new file mode 100644
index 000000000..3b470f6ac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735d-l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pmr735d_l: pmic@b {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_l_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_l_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index d46e591e7..89beac833 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -5,12 +5,15 @@
  * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,qcm2290.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
 / {
@@ -150,6 +153,8 @@
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -194,6 +199,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster {
 			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
 			domain-idle-states = <&CLUSTER_SLEEP>;
 		};
 	};
@@ -261,6 +267,24 @@
 				};
 			};
 		};
+
+		mpm: interrupt-controller {
+			compatible = "qcom,mpm";
+			qcom,rpm-msg-ram = <&apss_mpm>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apcs_glb 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#power-domain-cells = <0>;
+			interrupt-parent = <&intc>;
+			qcom,mpm-pin-count = <96>;
+			qcom,mpm-pin-map = <2 275>,  /* TSENS0 uplow */
+					   <5 296>,  /* Soundwire master_irq */
+					   <12 422>, /* DWC3 ss_phy_irq */
+					   <24 79>,  /* Soundwire wake_irq */
+					   <86 183>, /* MPM wake, SPMI */
+					   <90 260>; /* QUSB2_PHY DP+DM */
+		};
 	};
 
 	reserved_memory: reserved-memory {
@@ -418,12 +442,18 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,qcm2290-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,qcm2290-tlmm";
 			reg = <0x0 0x00500000 0x0 0x300000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 127>;
+			wakeup-parent = <&mpm>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -665,9 +695,38 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,qcm2290-snoc";
+			reg = <0x0 0x01880000 0x0 0x60200>;
+			#interconnect-cells = <2>;
+
+			qup_virt: interconnect-qup {
+				compatible = "qcom,qcm2290-qup-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,qcm2290-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,qcm2290-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,qcm2290-cnoc";
+			reg = <0x0 0x01900000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b44000 {
 			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b44000 0x0 0x3000>;
@@ -680,6 +739,60 @@
 			};
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -692,7 +805,7 @@
 				    "obsrvr",
 				    "intr",
 				    "cnfg";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "periph_irq";
 			qcom,ee = <0>;
 			qcom,channel = <0>;
@@ -707,8 +820,8 @@
 			reg = <0x0 0x04411000 0x0 0x1ff>,
 			      <0x0 0x04410000 0x0 0x8>;
 			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -720,9 +833,22 @@
 			clock-names = "core";
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,qcm2290-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
-			compatible = "qcom,rpm-msg-ram";
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
 		};
 
 		sram@4690000 {
@@ -755,13 +881,45 @@
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 			iommus = <&apps_smmu 0xc0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x000f642c>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -785,6 +943,12 @@
 			power-domains = <&rpmpd QCM2290_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0xa0 0x0>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
@@ -798,11 +962,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -850,6 +1018,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -866,6 +1043,12 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -879,6 +1062,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart0_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -893,6 +1082,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -909,6 +1107,12 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -925,6 +1129,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -941,6 +1154,12 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -957,6 +1176,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -973,6 +1201,12 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -989,6 +1223,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1005,6 +1248,12 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1018,6 +1267,12 @@
 				clock-names = "se";
 				pinctrl-0 = <&qup_uart4_default>;
 				pinctrl-names = "default";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1032,6 +1287,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1048,6 +1312,12 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+						 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1057,9 +1327,10 @@
 		usb: usb@4ef8800 {
 			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
 			reg = <0x0 0x04ef8800 0x0 0x400>;
-			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+			interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -1080,6 +1351,13 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			/* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
 			wakeup-source;
 
 			#address-cells = <2>;
@@ -1105,6 +1383,225 @@
 			};
 		};
 
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,qcm2290-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+			interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,qcm2290-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd QCM2290_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				power-domains = <&rpmpd QCM2290_VDDMX>;
+				required-opps = <&rpmpd_opp_nom>;
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,qcm2290-dispcc";
+			reg = <0x0 0x05f00000 0x0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		remoteproc_mpss: remoteproc@6080000 {
 			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
 			reg = <0x0 0x06080000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
new file mode 100644
index 000000000..1e85c43a6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi" /* PM7350C */
+#include "pmk8350.dtsi" /* PMK7325 */
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Fairphone 5";
+	compatible = "fairphone,fp5", "qcom,qcm6490";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xe1000000 0x0 (2700 * 1224 * 4)>;
+			width = <1224>;
+			height = <2700>;
+			stride = <(1224 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_down_default>, <&hall_sensor_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		/* Powered by the always-on vreg_l8c */
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 155 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: cont-splash@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x5100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "OIS_AVDD0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vreg_bob>;
+	};
+
+	ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
+		compatible = "regulator-fixed";
+		regulator-name = "OIS_DVDD_1P1";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vreg_s8b>;
+	};
+
+	afvdd_2p8: regulator-afvdd-2p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "AFVDD_2P8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vreg_bob>;
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-cam-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		sdm-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_s1b: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			/* Constrained for UFS VCC, at least until UFS driver scales voltage */
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9c: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/* Hall sensor VDD */
+			regulator-always-on;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&dispcc {
+	/* Disable for now so simple-framebuffer continues working */
+	status = "disabled";
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_EDP_CLKREF_EN>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* Pixelworks @ 26 */
+	/* FSA4480 USB audio switch @ 42 */
+	/* AW86927FCR haptics @ 5a */
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* AW88261FCR amplifier @ 34 */
+	/* AW88261FCR amplifier @ 35 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* PTN36502 USB redriver @ 1a */
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* ST21NFC NFC @ 28 */
+	/* VL53L3 ToF @ 29 */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/qcm6490/fairphone5/ipa_fws.mdt";
+	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm7325_gpios {
+	volume_down_default: volume-down-default-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8350c_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	cam-flash-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	sdm-skin-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@144 {
+		reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_quiet_therm";
+	};
+
+	channel@145 {
+		reg = <PM7325_ADC7_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_cam_flash_therm";
+	};
+
+	channel@146 {
+		reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_sdm_skin_therm";
+	};
+
+	channel@147 {
+		reg = <PM7325_ADC7_AMUX_THM4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pm7325_wide_rfc_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/fairphone5/modem.mbn";
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	drive-strength = <16>;
+	bias-disable;
+};
+
+&sdc2_cmd {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdc2_data {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c>;
+	vqmmc-supply = <&vreg_l6c>;
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+
+	status = "okay";
+};
+
+&spi13 {
+	status = "okay";
+
+	/* Goodix touchscreen @ 0 */
+};
+
+&tlmm {
+	/*
+	 * 32-33: SMB1394 (SPMI)
+	 * 56-59: fingerprint reader (SPI)
+	 */
+	gpio-reserved-ranges = <32 2>, <56 4>;
+
+	bluetooth_enable_default: bluetooth-enable-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio155";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	sw_ctrl_default: sw-ctrl-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+
+		pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_l19b>;
+		vddaon-supply = <&vreg_s7b>;
+		vddbtcxmx-supply = <&vreg_s7b>;
+		vddrfacmn-supply = <&vreg_s7b>;
+		vddrfa0p8-supply = <&vreg_s7b>;
+		vddrfa1p7-supply = <&vreg_s1b>;
+		vddrfa1p2-supply = <&vreg_s8b>;
+		vddrfa2p2-supply = <&vreg_s1c>;
+		vddasd-supply = <&vreg_l11c>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b>;
+	vcc-max-microamp = <800000>;
+	/*
+	 * Technically l9b enables an eLDO (supplied by s1b) which then powers
+	 * VCCQ2 of the UFS.
+	 */
+	vccq-supply = <&vreg_l9b>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c>;
+	vdda-pll-supply = <&vreg_l6b>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l2b>;
+
+	qcom,hs-crossover-voltage-microvolt = <28000>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+	qcom,hs-rise-fall-time-bp = <5430>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <2430>;
+
+	qcom,pre-emphasis-amplitude-bp = <20000>;
+	qcom,pre-emphasis-duration-bp = <20000>;
+
+	qcom,squelch-detector-bp = <(-2090)>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l1b>;
+
+	status = "okay";
+};
+
+&wifi {
+	qcom,ath11k-calibration-variant = "Fairphone_5";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
new file mode 100644
index 000000000..d58d4f5dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
+	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&pm8350c_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p952>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 2721f32df..2f2eeaf2e 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@
 			reg = <0x00400000 0x80000>;
 			compatible = "qcom,qcs404-bimc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
 			reg = <0x00500000 0x15080>;
 			compatible = "qcom,qcs404-pcnoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
 		};
 
 		snoc: interconnect@580000 {
 			reg = <0x00580000 0x23080>;
 			compatible = "qcom,qcs404-snoc";
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		remoteproc_cdsp: remoteproc@b00000 {
@@ -1461,7 +1452,7 @@
 			};
 		};
 
-		pcie: pci@10000000 {
+		pcie: pcie@10000000 {
 			compatible = "qcom,pcie-qcs404";
 			reg = <0x10000000 0xf1d>,
 			      <0x10000f20 0xa8>,
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
new file mode 100644
index 000000000..ac4579119
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB3gen2";
+	compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+			reg = <0x0 0x81800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		camera_mem: camera@84300000 {
+			reg = <0x0 0x84300000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		video_mem: video@8a700000 {
+			reg = <0x0 0x8a700000 0x0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8ae00000 {
+			reg = <0x0 0x8ae00000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b300000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b310000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8b31a000 {
+			reg = <0x0 0x8b31a000 0x0 0x2000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted_apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l3-supply = <&vreg_s2b_0p876>;
+		vdd-l5-supply = <&vreg_s2b_0p876>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s2b_0p876: smps2 {
+			regulator-min-microvolt = <570070>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p752: ldo4 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <820000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		reg_l5b_0p752: ldo5 {
+			regulator-min-microvolt = <552000>;
+			regulator-max-microvolt = <832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s2c_0p752: smps2 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s5c_0p752: smps5 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_s7c_0p752: smps7 {
+			regulator-min-microvolt = <465000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <35440000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 2>, /* ADSP */
+			       <48 4>; /* NFC */
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&wifi {
+	memory-region = <&wlan_fw_mem>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 1c0e5d271..832f472c4 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -381,6 +381,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		ecpricc: clock-controller@280000 {
+			compatible = "qcom,qdu1000-ecpricc";
+			reg = <0x0 0x00280000 0x0 0x31c00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
+				 <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		gpi_dma0: dma-controller@900000  {
 			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
 			reg = <0x0 0x900000 0x0 0x60000>;
@@ -1446,13 +1460,10 @@
 		system-cache-controller@19200000 {
 			compatible = "qcom,qdu1000-llcc";
 			reg = <0 0x19200000 0 0xd80000>,
-			      <0 0x1a200000 0 0x80000>,
-			      <0 0x221c8128 0 0x4>;
-			reg-names = "llcc_base",
-				    "llcc_broadcast_base",
-				    "multi_channel_register";
+			      <0 0x1a200000 0 0x80000>;
+			reg-names = "llcc0_base",
+				    "llcc_broadcast_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			multi-ch-bit-off = <24 2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 37abb83ea..6e9dd0312 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,8 +5,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
-#include "pm2250.dtsi"
+#include "pm4125.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. Robotics RB1";
@@ -22,6 +23,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -39,6 +48,49 @@
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-user0 {
+			label = "green:user0";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
 	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_HDMI_OUT_1P2";
@@ -125,7 +177,87 @@
 	};
 };
 
-&pm2250_resin {
+&CPU_PD0 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD1 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD2 {
+	/delete-property/ power-domains;
+};
+
+&CPU_PD3 {
+	/delete-property/ power-domains;
+};
+
+/delete-node/ &CLUSTER_PD;
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm4125_l5>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm4125_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
 };
@@ -134,28 +266,38 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm2290/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm2290/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm2250-regulators";
 		vdd_s3-supply = <&vph_pwr>;
 		vdd_s4-supply = <&vph_pwr>;
-		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>;
 		vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
-		vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+		vdd_l13_l14_l15_l16-supply = <&pm4125_s4>;
 
 		/*
 		 * S1 - VDD_APC
 		 * S2 - VDD_CX
 		 */
 
-		pm2250_s3: s3 {
+		pm4125_s3: s3 {
 			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
 			regulator-min-microvolt = <1352000>;
 			regulator-max-microvolt = <1352000>;
 			regulator-boot-on;
 		};
 
-		pm2250_s4: s4 {
+		pm4125_s4: s4 {
 			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
 			regulator-min-microvolt = <2072000>;
 			regulator-max-microvolt = <2072000>;
@@ -164,7 +306,7 @@
 
 		/* L1 - VDD_MX */
 
-		pm2250_l2: l2 {
+		pm4125_l2: l2 {
 			/* LPDDR4X VDD2 */
 			regulator-min-microvolt = <1136000>;
 			regulator-max-microvolt = <1136000>;
@@ -172,7 +314,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l3: l3 {
+		pm4125_l3: l3 {
 			/* LPDDR4X VDDQ */
 			regulator-min-microvolt = <616000>;
 			regulator-max-microvolt = <616000>;
@@ -180,14 +322,14 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l4: l4 {
+		pm4125_l4: l4 {
 			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <2700000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l5: l5 {
+		pm4125_l5: l5 {
 			/* CSI/DSI */
 			regulator-min-microvolt = <1232000>;
 			regulator-max-microvolt = <1232000>;
@@ -195,7 +337,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l6: l6 {
+		pm4125_l6: l6 {
 			/* DRAM PLL */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -203,7 +345,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l7: l7 {
+		pm4125_l7: l7 {
 			/* Wi-Fi CX/MX */
 			regulator-min-microvolt = <664000>;
 			regulator-max-microvolt = <664000>;
@@ -214,20 +356,20 @@
 		 * L9 - VDD_LPI_MX
 		 */
 
-		pm2250_l10: l10 {
+		pm4125_l10: l10 {
 			/* Wi-Fi RFA */
 			regulator-min-microvolt = <1304000>;
 			regulator-max-microvolt = <1304000>;
 		};
 
-		pm2250_l11: l11 {
+		pm4125_l11: l11 {
 			/* GPS RF1 */
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l12: l12 {
+		pm4125_l12: l12 {
 			/* USB PHYs */
 			regulator-min-microvolt = <928000>;
 			regulator-max-microvolt = <928000>;
@@ -235,7 +377,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l13: l13 {
+		pm4125_l13: l13 {
 			/* USB/QFPROM/PLLs */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -243,7 +385,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l14: l14 {
+		pm4125_l14: l14 {
 			/* SDHCI1 VQMMC */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -252,7 +394,7 @@
 			regulator-always-on;
 		};
 
-		pm2250_l15: l15 {
+		pm4125_l15: l15 {
 			/* WCD/DSI/BT VDDIO */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -261,38 +403,38 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l16: l16 {
+		pm4125_l16: l16 {
 			/* GPS RF2 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 		};
 
-		pm2250_l17: l17 {
+		pm4125_l17: l17 {
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
 		};
 
-		pm2250_l18: l18 {
+		pm4125_l18: l18 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l19: l19 {
+		pm4125_l19: l19 {
 			/* VDD_PXn */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
-		pm2250_l20: l20 {
+		pm4125_l20: l20 {
 			/* SDHCI1 VMMC */
 			regulator-min-microvolt = <2400000>;
 			regulator-max-microvolt = <3600000>;
 			regulator-allow-set-load;
 		};
 
-		pm2250_l21: l21 {
+		pm4125_l21: l21 {
 			/* SDHCI2 VMMC */
 			regulator-min-microvolt = <2960000>;
 			regulator-max-microvolt = <3300000>;
@@ -300,7 +442,7 @@
 			regulator-boot-on;
 		};
 
-		pm2250_l22: l22 {
+		pm4125_l22: l22 {
 			/* Wi-Fi */
 			regulator-min-microvolt = <3312000>;
 			regulator-max-microvolt = <3312000>;
@@ -309,8 +451,8 @@
 };
 
 &sdhc_1 {
-	vmmc-supply = <&pm2250_l20>;
-	vqmmc-supply = <&pm2250_l14>;
+	vmmc-supply = <&pm4125_l20>;
+	vqmmc-supply = <&pm4125_l14>;
 	pinctrl-0 = <&sdc1_state_on>;
 	pinctrl-1 = <&sdc1_state_off>;
 	pinctrl-names = "default", "sleep";
@@ -322,8 +464,8 @@
 };
 
 &sdhc_2 {
-	vmmc-supply = <&pm2250_l21>;
-	vqmmc-supply = <&pm2250_l4>;
+	vmmc-supply = <&pm4125_l21>;
+	vqmmc-supply = <&pm4125_l4>;
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
 	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
@@ -333,7 +475,34 @@
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
 &tlmm {
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
 	sd_det_in_on: sd-det-in-on-state {
 		pins = "gpio88";
 		function = "gpio";
@@ -367,8 +536,8 @@
 };
 
 &usb_qmpphy {
-	vdda-phy-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
+	vdda-phy-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
 	status = "okay";
 };
 
@@ -377,9 +546,18 @@
 };
 
 &usb_hsphy {
-	vdd-supply = <&pm2250_l12>;
-	vdda-pll-supply = <&pm2250_l13>;
-	vdda-phy-dpdm-supply = <&pm2250_l21>;
+	vdd-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	vdda-phy-dpdm-supply = <&pm4125_l21>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
+	vdd-1.8-xo-supply = <&pm4125_l13>;
+	vdd-1.3-rfa-supply = <&pm4125_l10>;
+	vdd-3.3-ch0-supply = <&pm4125_l22>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB1";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 9738c0dac..52f31f316 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &uart3;
 	};
 
 	chosen {
@@ -280,6 +281,12 @@
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/qrb4210/modem.mbn";
+
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -346,13 +353,14 @@
 		};
 
 		vreg_l8a_0p664: l8 {
-			regulator-min-microvolt = <400000>;
-			regulator-max-microvolt = <728000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		vreg_l9a_1p8: l9 {
 			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10a_1p8: l10 {
@@ -389,11 +397,13 @@
 		vreg_l16a_1p3: l16 {
 			regulator-min-microvolt = <1704000>;
 			regulator-max-microvolt = <1904000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l17a_1p3: l17 {
 			regulator-min-microvolt = <1152000>;
 			regulator-max-microvolt = <1384000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l18a_1p232: l18 {
@@ -424,8 +434,9 @@
 		};
 
 		vreg_l23a_3p3: l23 {
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l24a_2p96: l24 {
@@ -487,6 +498,66 @@
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
 
+	uart3_default: uart3-default-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "qup3";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	uart3_sleep: uart3-sleep-state {
+		cts-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		tx-pins {
+			pins = "gpio10";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rx-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	lt9611_rst_pin: lt9611-rst-state {
 		pins = "gpio41";
 		function = "gpio";
@@ -508,16 +579,32 @@
 	};
 };
 
-&uart4 {
+&uart3 {
+	interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>;
+	pinctrl-0 = <&uart3_default>;
+	pinctrl-1 = <&uart3_sleep>;
+	pinctrl-names = "default", "sleep";
 	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l9a_1p8>;
+		vddxo-supply = <&vreg_l16a_1p3>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l23a_3p3>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		max-speed = <3200000>;
+	};
 };
 
-&usb {
+&uart4 {
 	status = "okay";
 };
 
-&usb_dwc3 {
-	maximum-speed = "super-speed";
+&usb {
+	status = "okay";
 };
 
 &usb_hsphy {
@@ -535,6 +622,16 @@
 	status = "okay";
 };
 
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>;
+	vdd-1.8-xo-supply = <&vreg_l16a_1p3>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l23a_3p3>;
+	qcom,ath10k-calibration-variant = "Thundercomm_RB2";
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
index bb149e577..edc0e42ee 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -46,7 +46,7 @@
 		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
 		assigned-clock-rates = <24000000>;
 
-		dovdd-supply  = <&vreg_l7f_1p8>;
+		dovdd-supply = <&vreg_l7f_1p8>;
 		avdd-supply = <&vdc_5v>;
 		dvdd-supply = <&vdc_5v>;
 
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index e95a004c3..cd0db4f31 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -22,6 +23,7 @@
 
 	aliases {
 		serial0 = &uart12;
+		serial1 = &uart6;
 		sdhc2 = &sdhc_2;
 	};
 
@@ -609,12 +611,61 @@
 /* LS-I2C1 */
 &i2c15 {
 	status = "okay";
+
+	typec-mux@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_s4a_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_usb_con_ss: endpoint {
+					remote-endpoint = <&pm8150b_typec_mux_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_phy_con_ss: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+					data-lanes = <0 1 2 3>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				redriver_usb_con_sbu: endpoint {
+					remote-endpoint = <&pm8150b_typec_sbu_out>;
+				};
+			};
+		};
+	};
 };
 
 &mdss {
 	status = "okay";
 };
 
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
 &mdss_dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l9a_1p2>;
@@ -1213,6 +1264,14 @@
 		"HST_WLAN_UART_TX",
 		"HST_WLAN_UART_RX";
 
+	bt_en_state: bt-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
 	lt9611_irq_pin: lt9611-irq-state {
 		pins = "gpio63";
 		function = "gpio";
@@ -1246,6 +1305,26 @@
 	};
 };
 
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>;
+
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddpmu-supply = <&vreg_s2f_0p95>;
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddrfa0p9-supply = <&vreg_s2f_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p3>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+	};
+};
+
 &uart12 {
 	status = "okay";
 };
@@ -1273,7 +1352,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
 };
 
 &usb_1_hsphy {
@@ -1289,6 +1373,11 @@
 
 	vdda-phy-supply = <&vreg_l9a_1p2>;
 	vdda-pll-supply = <&vreg_l18a_0p92>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&redriver_phy_con_ss>;
 };
 
 &usb_2 {
@@ -1339,3 +1428,66 @@
 	drive-strength = <6>;
 	bias-disable;
 };
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&redriver_usb_con_ss>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&redriver_usb_con_sbu>;
+				};
+			};
+		};
+	};
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 5e4287f8c..b2cf2c988 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -367,6 +367,16 @@
 	};
 };
 
+&pmm8155au_1_gpios {
+	pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
+		pins = "gpio4";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -384,10 +394,10 @@
 &sdhc_2 {
 	status = "okay";
 
-	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
 	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
 	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
 	bus-width = <4>;
@@ -505,13 +515,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <16>;	/* 16 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	sdc2_off: sdc2-off-state {
@@ -532,13 +535,6 @@
 			bias-pull-up;		/* pull up */
 			drive-strength = <2>;	/* 2 MA */
 		};
-
-		sd-cd-pins {
-			pins = "gpio96";
-			function = "gpio";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
 	};
 
 	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
index 96b2c59ad..23888029c 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -168,6 +168,9 @@
 };
 
 &gpucc {
+	/* SA8295P and SA8540P doesn't provide gfx.lvl */
+	/delete-property/ power-domains;
+
 	status = "disabled";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 81a7eeb9c..26ad05bd3 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -285,6 +285,7 @@
 			compatible = "ethernet-phy-id0141.0dd4";
 			reg = <0x8>;
 			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
 			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <11000>;
 			reset-deassert-us = <70000>;
@@ -294,6 +295,7 @@
 			compatible = "ethernet-phy-id0141.0dd4";
 			reg = <0xa>;
 			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
 			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <11000>;
 			reset-deassert-us = <70000>;
@@ -459,6 +461,11 @@
 			  "ANALOG_PON_OPT";
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &pmm8654au_1_gpios {
 	gpio-line-names = "PMIC_C_ID0",
 			  "PMIC_C_ID1",
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index d4ca92b98..a7eaca33d 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1487,6 +1487,11 @@
 			};
 		};
 
+		rng: rng@10d2000 {
+			compatible = "qcom,sa8775p-trng", "qcom,trng";
+			reg = <0 0x010d2000 0 0x1000>;
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
@@ -1525,6 +1530,7 @@
 					<0 0>,
 					<0 0>,
 					<0 0>;
+			qcom,ice = <&ice>;
 			status = "disabled";
 		};
 
@@ -1546,6 +1552,13 @@
 			status = "disabled";
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sa8775p-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0x0 0x01d88000 0x0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -1902,6 +1915,50 @@
 			interrupt-controller;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c251000 0x0 0x1ff>,
+			      <0x0 0x0c224000 0x0 0x8>;
+			interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c252000 0x0 0x1ff>,
+			      <0x0 0x0c225000 0x0 0x8>;
+			interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <13>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1ff>,
+			      <0x0 0x0c222000 0x0 0x8>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c265000 0x0 0x1ff>,
+			      <0x0 0x0c223000 0x0 0x8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			#qcom,sensors = <12>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x400>;
@@ -1912,6 +1969,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2393,6 +2455,1058 @@
 		};
 	};
 
+	thermal-zones {
+		aoss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-0-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pcie-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-0-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu-1-3-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-0-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-0-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-1-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		nsp-1-2-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		ddrss-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss-1-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens3 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <105000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
 	arch_timer: timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
@@ -2401,7 +3515,7 @@
 			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	pcie0: pci@1c00000{
+	pcie0: pcie@1c00000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c00000 0x0 0x3000>,
 		      <0x0 0x40000000 0x0 0xf20>,
@@ -2501,7 +3615,7 @@
 		status = "disabled";
 	};
 
-	pcie1: pci@1c10000{
+	pcie1: pcie@1c10000 {
 		compatible = "qcom,pcie-sa8775p";
 		reg = <0x0 0x01c10000 0x0 0x3000>,
 		      <0x0 0x60000000 0x0 0xf20>,
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index 3342cb048..5afcb8212 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sc7180.dtsi"
@@ -129,6 +130,113 @@
 		pinctrl-names = "default";
 	};
 
+	sound: sound {
+		compatible = "qcom,sc7180-qdsp6-sndcard";
+		pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>;
+		pinctrl-names = "default";
+		model = "Acer-Aspire-1";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		multimedia1-dai-link {
+			link-name = "MultiMedia1";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+			};
+		};
+
+		multimedia2-dai-link {
+			link-name = "MultiMedia2";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+			};
+		};
+
+		multimedia3-dai-link {
+			link-name = "MultiMedia3";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+			};
+		};
+
+		multimedia4-dai-link {
+			link-name = "MultiMedia4";
+
+			cpu {
+				sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+			};
+		};
+
+		primary-rx-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		primary-tx-dai-link {
+			link-name = "Primary MI2S Capture";
+
+			cpu {
+				sound-dai = <&q6afedai PRIMARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0>;
+			};
+		};
+
+		tertiary-rx-dai-link {
+			link-name = "Tertiary MI2S Playback";
+
+			cpu {
+				sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+		};
+
+		displayport-rx-dai-link {
+			link-name = "DisplayPort Playback";
+
+			cpu {
+				sound-dai = <&q6afedai DISPLAY_PORT_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6routing>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+
 	reg_tp_3p3: touchpad-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "tp_3p3";
@@ -364,6 +472,49 @@
 	status = "disabled";
 };
 
+&pm6150_rtc {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <1>;
+	};
+
+	dai@17 {
+		reg = <PRIMARY_MI2S_TX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+
+	dai@104 {
+		reg = <DISPLAY_PORT_RX>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -372,6 +523,12 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn";
+	status = "okay";
+};
+
 &remoteproc_mpss {
 	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index a532cc4aa..7765c8f64 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -10,7 +10,6 @@
 
 /* Deleted nodes from sc7180-trogdor.dtsi */
 
-/delete-node/ &alc5682;
 /delete-node/ &pp3300_codec;
 
 / {
@@ -104,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 {
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
+		panel = <&panel>;
 		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 
 		vdd-supply = <&pp3300_ts>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index b27dcd2ec..2ba3bbf3b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -7,6 +7,8 @@
 
 /* This file must be included after sc7180-trogdor.dtsi */
 
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
+
 / {
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
 
@@ -116,6 +118,7 @@ ap_ts_pen_1v8: &i2c4 {
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
+		panel = <&panel>;
 		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 
 		vdd-supply = <&pp3300_touch>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
index 36326ef97..d6db7d83a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -11,19 +11,13 @@
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include <arm/cros-ec-keyboard.dtsi>
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
 
 / {
 	model = "Google Kingoftown";
 	compatible = "google,kingoftown", "qcom,sc7180";
 };
 
-&alc5682 {
-	compatible = "realtek,rt5682s";
-	/delete-property/ VBAT-supply;
-	realtek,dmic1-clk-pin = <2>;
-	realtek,dmic-clk-rate-hz = <2048000>;
-};
-
 &ap_tp_i2c {
 	status = "okay";
 };
@@ -84,11 +78,6 @@ ap_ts_pen_1v8: &i2c4 {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
 
-&sound {
-	compatible = "google,sc7180-trogdor";
-	model = "sc7180-rt5682s-max98357a-1mic";
-};
-
 &wifi {
 	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
new file mode 100644
index 000000000..eba15535e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev10+)";
+	compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
+};
+
+/delete-node/ &ap_ts;
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
index 7f01573b5..e7da0d6e8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -11,6 +11,7 @@
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
index 913b5fc3b..a609a2651 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -11,13 +11,14 @@
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
-	model = "Google Lazor Limozeen without Touchscreen (rev9+)";
-	compatible = "google,lazor-sku6", "qcom,sc7180";
+	model = "Google Lazor Limozeen without Touchscreen (rev9)";
+	compatible = "google,lazor-rev9-sku6", "google,lazor-rev9-sku18", "qcom,sc7180";
 };
 
-/delete-node/&ap_ts;
+/delete-node/ &ap_ts;
 
 &panel {
 	compatible = "edp-panel";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
new file mode 100644
index 000000000..5cc7c0d8e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev10+)";
+	compatible = "google,lazor-sku4", "google,lazor-sku15", "qcom,sc7180";
+};
+
+/delete-node/ &ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+		pinctrl-names = "default";
+
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&tlmm>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
index d42dcd421..8a24812b9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -11,6 +11,8 @@
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
+
 
 / {
 	model = "Google Lazor Limozeen (rev4 - rev8)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
index 15d77dc5f..dd377209d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -11,23 +11,24 @@
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
-	model = "Google Lazor Limozeen (rev9+)";
-	compatible = "google,lazor-sku4", "qcom,sc7180";
+	model = "Google Lazor Limozeen (rev9)";
+	compatible = "google,lazor-rev9-sku4", "google,lazor-rev9-sku15", "qcom,sc7180";
 };
 
-/delete-node/&ap_ts;
+/delete-node/ &ap_ts;
 
 &ap_ts_pen_1v8 {
 	ap_ts: touchscreen@10 {
 		compatible = "elan,ekth3500";
 		reg = <0x10>;
-		pinctrl-names = "default";
 		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+		pinctrl-names = "default";
 
-		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&tlmm>;
 
 		vcc33-supply = <&pp3300_ts>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index 80c7108bc..b60060a38 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Lazor (rev1 - 2)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
new file mode 100644
index 000000000..45d34718a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev10+) with KB Backlight";
+	compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
new file mode 100644
index 000000000..79028d0dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev10+) with LTE";
+	compatible = "google,lazor-sku0", "google,lazor-sku10", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
new file mode 100644
index 000000000..045827341
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev10+)";
+	compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
index 6ff81c1f7..3459b81c5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
index e58e36e35..ff8f47da1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -11,6 +11,7 @@
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Lazor (rev3 - 8) with LTE";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index 76c83f88c..dd8f6d956 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
index 960f7b7ce..faf527972 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -10,11 +10,12 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
-	model = "Google Lazor (rev9+) with KB Backlight";
-	compatible = "google,lazor-sku2", "qcom,sc7180";
+	model = "Google Lazor (rev9) with KB Backlight";
+	compatible = "google,lazor-rev9-sku2", "qcom,sc7180";
 };
 
 &keyboard_backlight {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
index 38027f13b..d737fd063 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -11,10 +11,11 @@
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
-	model = "Google Lazor (rev9+) with LTE";
-	compatible = "google,lazor-sku0", "qcom,sc7180";
+	model = "Google Lazor (rev9) with LTE";
+	compatible = "google,lazor-rev9-sku0", "google,lazor-rev9-sku10", "qcom,sc7180";
 };
 
 &ap_sar_sensor_i2c {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
index 56dd22265..8daad32ff 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -10,9 +10,10 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-lite.dtsi"
 
 / {
-	model = "Google Lazor (rev9+)";
-	compatible = "google,lazor", "qcom,sc7180";
+	model = "Google Lazor (rev9)";
+	compatible = "google,lazor-rev9", "qcom,sc7180";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 13339b723..e9f213d27 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -43,6 +43,7 @@ ap_ts_pen_1v8: &i2c4 {
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
+		panel = <&panel>;
 		post-power-on-delay-ms = <20>;
 		hid-descr-addr = <0x0001>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
index 767cb7450..1c3d9f138 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
@@ -11,6 +11,7 @@
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-pazquel.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Pazquel (Parade,LTE)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
index 9145b74e9..bf170471b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
@@ -11,6 +11,7 @@
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-pazquel.dtsi"
 #include "sc7180-trogdor-lte-sku.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Pazquel (TI,LTE)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
index 9a0e6632a..60ae129b8 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-parade-ps8640.dtsi"
 #include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Pazquel (Parade)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
index 47c5970d8..31678a98c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 #include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Pazquel (TI)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
index 273e2249f..89034b670 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -7,13 +7,7 @@
 
 /* This file must be included after sc7180-trogdor.dtsi */
 #include "sc7180-trogdor-pazquel.dtsi"
-
-&alc5682 {
-	compatible = "realtek,rt5682s";
-	realtek,dmic1-clk-pin = <2>;
-	realtek,dmic-clk-rate-hz = <2048000>;
-	/delete-property/ VBAT-supply;
-};
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
 
 ap_ts_pen_1v8: &i2c4 {
 	clock-frequency = <400000>;
@@ -64,11 +58,6 @@ ap_ts_pen_1v8: &i2c4 {
 	>;
 };
 
-&sound {
-	compatible = "google,sc7180-trogdor";
-	model = "sc7180-rt5682s-max98357a-1mic";
-};
-
 &wifi {
 	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index fd944842d..067813f5f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -8,6 +8,7 @@
 #include "sc7180-trogdor.dtsi"
 /* Must come after sc7180-trogdor.dtsi to modify cros_ec */
 #include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 / {
@@ -102,6 +103,7 @@ ap_ts_pen_1v8: &i2c4 {
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
+		panel = <&panel>;
 		post-power-on-delay-ms = <20>;
 		hid-descr-addr = <0x0001>;
 
@@ -139,7 +141,7 @@ ap_ts_pen_1v8: &i2c4 {
 };
 
 &panel {
-	compatible = "kingdisplay,kd116n21-30nv-a010";
+	compatible = "edp-panel";
 };
 
 &pen_insert {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index 62ab6427d..5f06842c6 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 /* This board only has 1 USB Type-C port. */
 /delete-node/ &usb_c1;
@@ -69,6 +70,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
+		panel = <&panel>;
 		post-power-on-delay-ms = <20>;
 		hid-descr-addr = <0x0001>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 671b3691f..c9667751a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -10,6 +10,7 @@
 #include "sc7180-trogdor.dtsi"
 /* Must come after sc7180-trogdor.dtsi to modify cros_ec */
 #include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi
new file mode 100644
index 000000000..26f2f5de4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682i-sku.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for SKUs with rt5682i
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+&hp_i2c {
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		/*
+		 * This will get ignored because the interrupt type
+		 * is set in rt5682.c.
+		 */
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+		VBAT-supply = <&pp3300_audio>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <1>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&sound {
+	model = "sc7180-rt5682-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi
new file mode 100644
index 000000000..ea036a73f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-rt5682s-sku.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for SKUs with rt5682s
+ *
+ * Copyright 2023 Google LLC.
+ */
+
+&hp_i2c {
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		/*
+		 * This will get ignored because the interrupt type
+		 * is set in rt5682.c.
+		 */
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&sound {
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
index 6225ab832..116f79c25 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -10,21 +10,20 @@
 
 /dts-v1/;
 
-#include "sc7180-trogdor-wormdingler-rev1-boe.dts"
+#include "sc7180-trogdor-wormdingler.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
 
 / {
 	model = "Google Wormdingler rev1+ (BOE, rt5682s)";
 	compatible = "google,wormdingler-sku1025", "qcom,sc7180";
 };
 
-&alc5682 {
-	compatible = "realtek,rt5682s";
-	/delete-property/ VBAT-supply;
-	realtek,dmic1-clk-pin = <2>;
-	realtek,dmic-clk-rate-hz = <2048000>;
+&mdss_dsi0_phy {
+	qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-drive-ldo-level = <450>;
 };
 
-&sound {
-	compatible = "google,sc7180-trogdor";
-	model = "sc7180-rt5682s-max98357a-1mic";
+&panel {
+	compatible = "boe,tv110c9m-ll3";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
index 6eeead70d..72627760e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor-wormdingler.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Wormdingler rev1+ BOE panel board";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
index b40b068da..0bf355e08 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -10,21 +10,14 @@
 
 /dts-v1/;
 
-#include "sc7180-trogdor-wormdingler-rev1-inx.dts"
+#include "sc7180-trogdor-wormdingler.dtsi"
+#include "sc7180-trogdor-rt5682s-sku.dtsi"
 
 / {
 	model = "Google Wormdingler rev1+ (INX, rt5682s)";
 	compatible = "google,wormdingler-sku1", "qcom,sc7180";
 };
 
-&alc5682 {
-	compatible = "realtek,rt5682s";
-	/delete-property/ VBAT-supply;
-	realtek,dmic1-clk-pin = <2>;
-	realtek,dmic-clk-rate-hz = <2048000>;
-};
-
-&sound {
-	compatible = "google,sc7180-trogdor";
-	model = "sc7180-rt5682s-max98357a-1mic";
+&panel {
+	compatible = "innolux,hj110iz-01a";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
index dd34a2297..4b165b826 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "sc7180-trogdor-wormdingler.dtsi"
+#include "sc7180-trogdor-rt5682i-sku.dtsi"
 
 / {
 	model = "Google Wormdingler rev1+ INX panel board";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 2f6a340dd..305ad1272 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -123,6 +123,7 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 
+		panel = <&panel>;
 		post-power-on-delay-ms = <70>;
 		hid-descr-addr = <0x0001>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 5a33e16a8..ebe376781 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -372,7 +372,6 @@
 
 	sound: sound {
 		compatible = "google,sc7180-trogdor";
-		model = "sc7180-rt5682-max98357a-1mic";
 
 		audio-routing =
 			"Headphone Jack", "HPOL",
@@ -747,32 +746,6 @@ ap_tp_i2c: &i2c7 {
 hp_i2c: &i2c9 {
 	status = "okay";
 	clock-frequency = <400000>;
-
-	alc5682: codec@1a {
-		compatible = "realtek,rt5682i";
-		reg = <0x1a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hp_irq>;
-
-		#sound-dai-cells = <1>;
-
-		interrupt-parent = <&tlmm>;
-		/*
-		 * This will get ignored because the interrupt type
-		 * is set in rt5682.c.
-		 */
-		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
-
-		AVDD-supply = <&pp1800_alc5682>;
-		DBVDD-supply = <&pp1800_alc5682>;
-		LDO1-IN-supply = <&pp1800_alc5682>;
-		MICVDD-supply = <&pp3300_codec>;
-		VBAT-supply = <&pp3300_audio>;
-
-		realtek,dmic1-data-pin = <1>;
-		realtek,dmic1-clk-pin = <1>;
-		realtek,jd-src = <1>;
-	};
 };
 
 &lpasscc {
@@ -970,6 +943,8 @@ ap_spi_fp: &spi10 {
 		vddrf-supply = <&pp1300_l2c>;
 		vddch0-supply = <&pp3300_l10c>;
 		max-speed = <3200000>;
+
+		qcom,local-bd-address-broken;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f7c528ecb..4dcaa15ca 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -11,15 +11,19 @@
 #include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -687,7 +691,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
 
@@ -2042,6 +2046,11 @@
 				pins = "gpio57";
 				function = "lpass_ext";
 			};
+
+			ter_mi2s_active: ter-mi2s-active-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66";
+				function = "mi2s_2";
+			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {
@@ -2795,49 +2804,28 @@
 			nvmem-cells = <&qusb2p_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x3c>,
-			      <0 0x088ea000 0 0x18c>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x18>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		pmu@90b6300 {
@@ -3001,7 +2989,7 @@
 				iommus = <&apps_smmu 0x540 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3112,8 +3100,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x2>;
 
@@ -3307,8 +3299,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -3365,8 +3358,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi0_phy 0>,
 				 <&mdss_dsi0_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "dsi0_phy_pll_out_byteclk",
@@ -3776,6 +3769,126 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@62400000 {
+			compatible = "qcom,sc7180-adsp-pas";
+			reg = <0 0x62400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7180_LCX>,
+					<&rpmhpd SC7180_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			qcom,qmp = <&aoss_qmp>;
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						compatible = "qcom,q6core";
+						reg = <APR_SVC_ADSP_CORE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1001 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
 		lpasscc: clock-controller@62d00000 {
 			compatible = "qcom,sc7180-lpasscorecc";
 			reg = <0 0x62d00000 0 0x50000>,
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 5d462ae14..c4d00a81d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -17,6 +17,9 @@
  * required by the setup for Chrome boards.
  */
 
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_zap_mem;
+/delete-node/ &gpu_zap_shader;
 /delete-node/ &hyp_mem;
 /delete-node/ &xbl_mem;
 /delete-node/ &reserved_xbl_uefi_log;
@@ -24,11 +27,6 @@
 
 / {
 	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
 		camera_mem: memory@8ad00000 {
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
@@ -38,11 +36,6 @@
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
 	};
 };
 
@@ -94,9 +87,31 @@
 	};
 };
 
+/* Currently not used */
+&remoteproc_cdsp {
+	/delete-property/ memory-region;
+};
+
 &remoteproc_wpss {
-	status = "okay";
+	compatible = "qcom,sc7280-wpss-pil";
+	clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+		 <&gcc GCC_WPSS_AHB_CLK>,
+		 <&gcc GCC_WPSS_RSCP_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "ahb_bdg",
+		      "ahb",
+		      "rscp",
+		      "xo";
+
+	resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+		 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+	reset-names = "restart", "pdc_sync";
+
+	qcom,halt-regs = <&tcsr_1 0x17000>;
+
 	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+
+	status = "okay";
 };
 
 &scm {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index afae7f46b..c2cba9d71 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -38,6 +38,10 @@
 	};
 };
 
+&bluetooth {
+	vddio-supply = <&vreg_l18b_1p8>;
+};
+
 ap_tp_i2c: &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index 95505549a..b721a8546 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -8,11 +8,6 @@
 
 / {
 	reserved-memory {
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
 		mba_mem: memory@9c700000 {
 			reg = <0x0 0x9c700000 0x0 0x200000>;
 			no-map;
@@ -33,6 +28,8 @@
 
 &remoteproc_mpss {
 	compatible = "qcom,sc7280-mss-pil";
+	reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
 
 	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
 		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
index 2febd6126..3ebc915f0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -7,5 +7,6 @@
 
 /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
 
+/delete-node/ &mpss_mem;
 /delete-node/ &remoteproc_mpss;
 /delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4d..a0059527d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -499,6 +499,25 @@
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8e330d2e2..46545cd69 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -13,11 +13,14 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7280.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -89,74 +92,99 @@
 		#size-cells = <2>;
 		ranges;
 
-		wlan_ce_mem: memory@4cd000 {
+		wlan_ce_mem: wlan-ce@4cd000 {
 			no-map;
 			reg = <0x0 0x004cd000 0x0 0x1000>;
 		};
 
-		hyp_mem: memory@80000000 {
+		hyp_mem: hyp@80000000 {
 			reg = <0x0 0x80000000 0x0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@80600000 {
+		xbl_mem: xbl@80600000 {
 			reg = <0x0 0x80600000 0x0 0x200000>;
 			no-map;
 		};
 
-		aop_mem: memory@80800000 {
+		aop_mem: aop@80800000 {
 			reg = <0x0 0x80800000 0x0 0x60000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@80860000 {
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
 			reg = <0x0 0x80860000 0x0 0x20000>;
 			compatible = "qcom,cmd-db";
 			no-map;
 		};
 
-		reserved_xbl_uefi_log: memory@80880000 {
+		reserved_xbl_uefi_log: xbl-uefi-res@80880000 {
 			reg = <0x0 0x80884000 0x0 0x10000>;
 			no-map;
 		};
 
-		sec_apps_mem: memory@808ff000 {
+		sec_apps_mem: sec-apps@808ff000 {
 			reg = <0x0 0x808ff000 0x0 0x1000>;
 			no-map;
 		};
 
-		smem_mem: memory@80900000 {
+		smem_mem: smem@80900000 {
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
 
-		cpucp_mem: memory@80b00000 {
+		cpucp_mem: cpucp@80b00000 {
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
 
-		wlan_fw_mem: memory@80c00000 {
+		wlan_fw_mem: wlan-fw@80c00000 {
 			reg = <0x0 0x80c00000 0x0 0xc00000>;
 			no-map;
 		};
 
-		video_mem: memory@8b200000 {
+		adsp_mem: adsp@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: video@8b200000 {
 			reg = <0x0 0x8b200000 0x0 0x500000>;
 			no-map;
 		};
 
-		ipa_fw_mem: memory@8b700000 {
+		cdsp_mem: cdsp@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b700000 {
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
 
-		rmtfs_mem: memory@9c900000 {
+		gpu_zap_mem: zap@8b71a000 {
+			reg = <0 0x8b71a000 0 0x2000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@9c900000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0x0 0x9c900000 0x0 0x280000>;
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
 
@@ -170,9 +198,8 @@
 			reg = <0x0 0x0>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-					   &LITTLE_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -198,9 +225,8 @@
 			reg = <0x0 0x100>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-					   &LITTLE_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -221,9 +247,8 @@
 			reg = <0x0 0x200>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-					   &LITTLE_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -244,9 +269,8 @@
 			reg = <0x0 0x300>;
 			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
-			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-					   &LITTLE_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -267,9 +291,8 @@
 			reg = <0x0 0x400>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			cpu-idle-states = <&BIG_CPU_SLEEP_0
-					   &BIG_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_400>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -290,9 +313,8 @@
 			reg = <0x0 0x500>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			cpu-idle-states = <&BIG_CPU_SLEEP_0
-					   &BIG_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_500>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -313,9 +335,8 @@
 			reg = <0x0 0x600>;
 			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
-			cpu-idle-states = <&BIG_CPU_SLEEP_0
-					   &BIG_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_600>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -336,9 +357,8 @@
 			reg = <0x0 0x700>;
 			clocks = <&cpufreq_hw 2>;
 			enable-method = "psci";
-			cpu-idle-states = <&BIG_CPU_SLEEP_0
-					   &BIG_CPU_SLEEP_1
-					   &CLUSTER_SLEEP_0>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
 			next-level-cache = <&L2_700>;
 			operating-points-v2 = <&cpu7_opp_table>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
@@ -431,9 +451,11 @@
 				min-residency-us = <5555>;
 				local-timer-stop;
 			};
+		};
 
+		domain-idle-states {
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
-				compatible = "arm,idle-state";
+				compatible = "domain-idle-state";
 				idle-state-name = "cluster-power-down";
 				arm,psci-suspend-param = <0x40003444>;
 				entry-latency-us = <3263>;
@@ -799,6 +821,59 @@
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
 	};
 
 	qspi_opp_table: opp-table-qspi {
@@ -856,9 +931,9 @@
 			reg = <0 0x00100000 0 0x1f0000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
-				 <0>, <&pcie1_lane>,
-				 <0>, <0>, <0>,
-				 <&usb_1_ssphy>;
+				 <0>, <&pcie1_phy>,
+				 <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
 				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
 				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
@@ -1986,6 +2061,11 @@
 			};
 		};
 
+		rng: rng@10d3000 {
+			compatible = "qcom,sc7280-trng", "qcom,trng";
+			reg = <0 0x010d3000 0 0x1000>;
+		};
+
 		cnoc2: interconnect@1500000 {
 			reg = <0 0x01500000 0 0x1000>;
 			compatible = "qcom,sc7280-cnoc2";
@@ -2078,7 +2158,7 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2098,8 +2178,16 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
@@ -2109,7 +2197,7 @@
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_lane>,
+				 <&pcie1_phy>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2143,7 +2231,7 @@
 
 			power-domains = <&gcc GCC_PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			pinctrl-names = "default";
@@ -2159,15 +2247,22 @@
 
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
-			reg = <0 0x01c0e000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0e000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_CLKREF_EN>,
-				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -2176,21 +2271,101 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
+		};
 
-			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x01c0e200 0 0x170>,
-				      <0 0x01c0e400 0 0x200>,
-				      <0 0x01c0ea00 0 0x1f0>,
-				      <0 0x01c0e600 0 0x170>,
-				      <0 0x01c0e800 0 0x200>,
-				      <0 0x01c0ee00 0 0xf4>;
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc7280-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
 
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc7280-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe00>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_1_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+
+			power-domains = <&rpmhpd SC7280_MX>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e6 0x0011>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <16>;
+			qcom,num-ees = <4>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x4e4 0x0011>,
+				 <&apps_smmu 0x4e4 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
 		};
 
 		ipa: ipa@1e40000 {
@@ -2504,7 +2679,6 @@
 			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0x0 0x20000>,
 				<0 0x03550000 0x0 0x10000>;
-			qcom,adsp-bypass-mode;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&lpass_tlmm 0 0 15>;
@@ -2570,6 +2744,10 @@
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
 
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_zap_mem>;
+			};
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2577,14 +2755,14 @@
 					opp-hz = /bits/ 64 <315000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1804000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-450000000 {
 					opp-hz = /bits/ 64 <450000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0x03>;
+					opp-supported-hw = <0x07>;
 				};
 
 				/* Only applicable for SKUs which has 550Mhz as Fmax */
@@ -2599,28 +2777,28 @@
 					opp-hz = /bits/ 64 <550000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <6832000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-608000000 {
 					opp-hz = /bits/ 64 <608000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <8368000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-700000000 {
 					opp-hz = /bits/ 64 <700000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-812000000 {
 					opp-hz = /bits/ 64 <812000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <8532000>;
-					opp-supported-hw = <0x02>;
+					opp-supported-hw = <0x06>;
 				};
 
 				opp-840000000 {
@@ -2739,8 +2917,7 @@
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7280-mpss-pas";
-			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
+			reg = <0 0x04080000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -3343,48 +3520,51 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy-wrapper@88e9000 {
-			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
-				     "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
 			};
 		};
 
@@ -3466,8 +3646,77 @@
 			status = "disabled";
 		};
 
+		remoteproc_adsp: remoteproc@3700000 {
+			compatible = "qcom,sc7280-adsp-pas";
+			reg = <0 0x03700000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_LCX>,
+					<&rpmhpd SC7280_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
 		remoteproc_wpss: remoteproc@8a00000 {
-			compatible = "qcom,sc7280-wpss-pil";
+			compatible = "qcom,sc7280-wpss-pas";
 			reg = <0 0x08a00000 0 0x10000>;
 
 			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
@@ -3479,12 +3728,8 @@
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
-				 <&gcc GCC_WPSS_AHB_CLK>,
-				 <&gcc GCC_WPSS_RSCP_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "ahb_bdg", "ahb",
-				      "rscp", "xo";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
 
 			power-domains = <&rpmhpd SC7280_CX>,
 					<&rpmhpd SC7280_MX>;
@@ -3497,11 +3742,6 @@
 			qcom,smem-states = <&wpss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
-				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
-			reset-names = "restart", "pdc_sync";
-
-			qcom,halt-regs = <&tcsr_1 0x17000>;
 
 			status = "disabled";
 
@@ -3643,6 +3883,144 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		remoteproc_cdsp: remoteproc@a300000 {
+			compatible = "qcom,sc7280-cdsp-pas";
+			reg = <0 0x0a300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x11a1 0x0420>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x11a2 0x0420>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x11a3 0x0420>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x11a4 0x0420>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x11a5 0x0420>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x11a6 0x0420>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x11a7 0x0420>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x11a8 0x0420>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x11ab 0x0420>,
+							 <&apps_smmu 0x118b 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x11ac 0x0420>,
+							 <&apps_smmu 0x118c 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x11ad 0x0420>,
+							 <&apps_smmu 0x118d 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x11ae 0x0420>,
+							 <&apps_smmu 0x118e 0x0420>;
+					};
+				};
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -3694,7 +4072,7 @@
 				iommus = <&apps_smmu 0xe0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
 			};
@@ -3780,6 +4158,86 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sc7280-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;
@@ -3799,8 +4257,8 @@
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
 				 <&mdss_dsi_phy 0>,
 				 <&mdss_dsi_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
 				 <&mdss_edp_phy 1>;
 			clock-names = "bi_tcxo",
@@ -3834,8 +4292,12 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem";
+			interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
@@ -4136,8 +4598,9 @@
 						"stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4284,6 +4747,62 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio69", "gpio70";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio71", "gpio72";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio73", "gpio74";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				pins = "gpio75", "gpio76";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			dp_hot_plug_det: dp-hot-plug-det-state {
 				pins = "gpio47";
 				function = "dp_hot";
@@ -5285,6 +5804,7 @@
 					  <SLEEP_TCS   3>,
 					  <WAKE_TCS    3>,
 					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
 
 			apps_bcm_voter: bcm-voter {
 				compatible = "qcom,bcm-voter";
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index abc66613c..0c22f3efe 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
@@ -130,7 +131,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		wlan_mem: wlan-region@8bc00000 {
@@ -451,8 +452,8 @@
 };
 
 &pcie3 {
-	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>;
 	pinctrl-0 = <&pcie3_default_state>;
 	pinctrl-names = "default";
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index ae008c3b0..bfee60c93 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
@@ -135,7 +136,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		wlan_mem: wlan-region@8bc00000 {
@@ -385,12 +386,18 @@
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l10e_2p9: ldo10 {
 			regulator-min-microvolt = <2904000>;
 			regulator-max-microvolt = <2904000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
 		};
 
 		vreg_l12e: ldo12 {
@@ -530,8 +537,8 @@
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index f9e929bfa..b481c15b2 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -289,7 +290,7 @@
 			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <241>;
+				entry-latency-us = <2411>;
 				exit-latency-us = <1461>;
 				min-residency-us = <4488>;
 				local-timer-stop;
@@ -297,7 +298,15 @@
 		};
 
 		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <3300>;
+				exit-latency-us = <3300>;
+				min-residency-us = <6000>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
 				compatible = "domain-idle-state";
 				arm,psci-suspend-param = <0x4100a344>;
 				entry-latency-us = <3263>;
@@ -581,7 +590,7 @@
 
 		CLUSTER_PD: power-domain-cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
 		};
 	};
 
@@ -781,6 +790,7 @@
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk";
+			power-domains = <&rpmhpd SC8180X_CX>;
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -1684,7 +1694,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1736,7 +1746,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
 				    <0x100 &apps_smmu 0x1d81 0x1>;
 
@@ -1782,7 +1791,7 @@
 			status = "disabled";
 		};
 
-		pcie3: pci@1c08000 {
+		pcie3: pcie@1c08000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1834,7 +1843,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1e00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
 				    <0x100 &apps_smmu 0x1e01 0x1>;
 
@@ -1881,7 +1889,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c10000 {
+		pcie1: pcie@1c10000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x68000000 0 0xf1d>,
@@ -1933,7 +1941,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1c80 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
 				    <0x100 &apps_smmu 0x1c81 0x1>;
 
@@ -1980,7 +1987,7 @@
 			status = "disabled";
 		};
 
-		pcie2: pci@1c18000 {
+		pcie2: pcie@1c18000 {
 			compatible = "qcom,pcie-sc8180x";
 			reg = <0 0x01c18000 0 0x3000>,
 			      <0 0x70000000 0 0xf1d>,
@@ -2032,7 +2039,6 @@
 			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			iommus = <&apps_smmu 0x1d00 0x7f>;
 			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
 				    <0x100 &apps_smmu 0x1d01 0x1>;
 
@@ -2084,7 +2090,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2118,15 +2124,21 @@
 					<0 0>,
 					<0 0>;
 
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			status = "disabled";
 		};
 
 		ufs_mem_phy: phy-wrapper@1d87000 {
 			compatible = "qcom,sc8180x-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref",
@@ -2134,16 +2146,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ipa_virt: interconnect@1e00000 {
@@ -2572,14 +2578,14 @@
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
 				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
-				      "mock_utmi",
 				      "sleep",
+				      "mock_utmi",
 				      "xo";
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -2623,19 +2629,19 @@
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
 				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
-				      "mock_utmi",
 				      "sleep",
+				      "mock_utmi",
 				      "xo";
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
@@ -2695,9 +2701,15 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
-			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
-					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
 
 			iommus = <&apps_smmu 0x800 0x420>;
 
@@ -2716,16 +2728,18 @@
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
 					 <&gcc GCC_DISP_HF_AXI_CLK>,
 					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
 				clock-names = "iface",
 					      "bus",
 					      "core",
-					      "vsync";
+					      "vsync",
+					      "rot",
+					      "lut";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <460000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
@@ -3129,8 +3143,6 @@
 				phys = <&edp_phy>;
 				phy-names = "dp";
 
-				#sound-dai-cells = <0>;
-
 				operating-points-v2 = <&edp_opp_table>;
 				power-domains = <&rpmhpd SC8180X_MMCX>;
 
@@ -3185,7 +3197,7 @@
 				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
 			clock-names = "aux", "cfg_ahb";
 
-			power-domains = <&dispcc MDSS_GDSC>;
+			power-domains = <&rpmhpd SC8180X_MX>;
 
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -3211,6 +3223,7 @@
 				      "edp_phy_pll_link_clk",
 				      "edp_phy_pll_vco_div_clk";
 			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3249,7 +3262,7 @@
 
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0x0 0x0c300000 0x0 0x100000>;
+			reg = <0x0 0x0c300000 0x0 0x400>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
 
@@ -3273,7 +3286,6 @@
 			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
-			cell-index = <0>;
 		};
 
 		apps_smmu: iommu@15000000 {
@@ -3431,10 +3443,12 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
 		};
 
 		apss_shared: mailbox@17c00000 {
-			compatible = "qcom,sc8180x-apss-shared";
+			compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared";
 			reg = <0x0 0x17c00000 0x0 0x1000>;
 			#mbox-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index ffc440642..41215567b 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -563,6 +563,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index f2055899a..eb657e544 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -573,6 +573,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 
@@ -721,6 +722,8 @@
 };
 
 &pcie4 {
+	max-link-speed = <2>;
+
 	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index b80815131..2e2126c16 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -1773,6 +1774,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_4_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie4_phy>;
 			phy-names = "pciephy";
@@ -1871,6 +1873,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3b_phy>;
 			phy-names = "pciephy";
@@ -1969,6 +1972,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_3A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie3a_phy>;
 			phy-names = "pciephy";
@@ -2070,6 +2074,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2B_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2b_phy>;
 			phy-names = "pciephy";
@@ -2168,6 +2173,7 @@
 			reset-names = "pci";
 
 			power-domains = <&gcc PCIE_2A_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
 
 			phys = <&pcie2a_phy>;
 			phy-names = "pciephy";
@@ -2634,7 +2640,7 @@
 			compatible = "qcom,sc8280xp-adsp-pas";
 			reg = <0 0x03000000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2731,7 +2737,7 @@
 			status = "disabled";
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2807,7 +2813,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.6.0";
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2844,7 +2850,7 @@
 			#reset-cells = <1>;
 		};
 
-		swr2: soundwire-controller@3330000 {
+		swr2: soundwire@3330000 {
 			compatible = "qcom,soundwire-v1.6.0";
 			reg = <0 0x03330000 0 0x2000>;
 			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
@@ -3450,6 +3456,20 @@
 			};
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc8280xp-camcc";
+			reg = <0 0x0ad00000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -4030,6 +4050,7 @@
 		sram@c3f0000 {
 			compatible = "qcom,rpmh-stats";
 			reg = <0 0x0c3f0000 0 0x400>;
+			qcom,qmp = <&aoss_qmp>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -4391,7 +4412,7 @@
 			compatible = "qcom,sc8280xp-nsp0-pas";
 			reg = <0 0x1b300000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -4522,7 +4543,7 @@
 			compatible = "qcom,sc8280xp-nsp1-pas";
 			reg = <0 0x21300000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index ec6003212..513fe5e76 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
 #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,sdm660.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -453,7 +454,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		smem_region: smem-mem@86000000 {
@@ -605,9 +606,6 @@
 			compatible = "qcom,sdm660-bimc";
 			reg = <0x01008000 0x78000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 		};
 
 		restart@10ac000 {
@@ -619,28 +617,17 @@
 			compatible = "qcom,sdm660-cnoc";
 			reg = <0x01500000 0x10000>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
 		snoc: interconnect@1626000 {
 			compatible = "qcom,sdm660-snoc";
 			reg = <0x01626000 0x7090>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 		};
 
 		anoc2_smmu: iommu@16c0000 {
 			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
 			reg = <0x016c0000 0x40000>;
-
-			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <1000>;
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "bus";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -685,16 +672,12 @@
 			compatible = "qcom,sdm660-a2noc";
 			reg = <0x01704000 0xc100>;
 			#interconnect-cells = <1>;
-			clock-names = "bus",
-				      "bus_a",
-				      "ipa",
+			clock-names = "ipa",
 				      "ufs_axi",
 				      "aggre2_ufs_axi",
 				      "aggre2_usb3_axi",
 				      "cfg_noc_usb2_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&rpmcc RPM_SMD_IPA_CLK>,
+			clocks = <&rpmcc RPM_SMD_IPA_CLK>,
 				 <&gcc GCC_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -705,10 +688,8 @@
 			compatible = "qcom,sdm660-mnoc";
 			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-				 <&mmcc AHB_CLK_SRC>;
+			clock-names = "iface";
+			clocks = <&mmcc AHB_CLK_SRC>;
 		};
 
 		tsens: thermal-sensor@10ae000 {
@@ -1028,6 +1009,65 @@
 			};
 		};
 
+		remoteproc_mss: remoteproc@4080000 {
+			compatible = "qcom,sdm660-mss-pil";
+			reg = <0x04080000 0x100>, <0x04180000 0x40>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GPLL0_OUT_MSSCC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "gpll0_mss",
+				      "snoc_axi",
+				      "mnoc_axi",
+				      "qdss",
+				      "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+			power-domains = <&rpmpd SDM660_VDDCX>,
+					<&rpmpd SDM660_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&mba_region>, <&mpss_region>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+		};
+
 		adreno_gpu: gpu@5000000 {
 			compatible = "qcom,adreno-508.0", "qcom,adreno";
 
@@ -1126,7 +1166,9 @@
 			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
 				 <&gcc GCC_BIMC_GFX_CLK>,
 				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
-			clock-names = "iface", "mem", "mem_iface";
+			clock-names = "iface",
+			              "mem",
+				      "mem_iface";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -1228,20 +1270,16 @@
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
 				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc",
 				      "core",
 				      "iface",
 				      "sleep",
-				      "mock_utmi",
-				      "bus";
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>,
-					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>,
-					       <19200000>;
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
 
 			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -1416,10 +1454,10 @@
 
 			clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
 				 <&gcc GCC_USB20_MASTER_CLK>,
-				 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB20_SLEEP_CLK>;
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
 			clock-names = "cfg_noc", "core",
-				      "mock_utmi", "sleep";
+				      "sleep", "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB20_MASTER_CLK>;
@@ -2144,10 +2182,9 @@
 
 			clocks = <&mmcc MNOC_AHB_CLK>,
 				 <&mmcc BIMC_SMMU_AHB_CLK>,
-				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
 				 <&mmcc BIMC_SMMU_AXI_CLK>;
 			clock-names = "iface-mm", "iface-smmu",
-				      "bus-mm", "bus-smmu";
+				      "bus-smmu";
 			#global-interrupts = <2>;
 			#iommu-cells = <1>;
 
@@ -2264,12 +2301,6 @@
 			compatible = "qcom,sdm660-gnoc";
 			reg = <0x17900000 0xe000>;
 			#interconnect-cells = <1>;
-			/*
-			 * This one apparently features no clocks,
-			 * so let's not mess with the driver needlessly
-			 */
-			clock-names = "bus", "bus_a";
-			clocks = <&xo_board>, <&xo_board>;
 		};
 
 		apcs_glb: mailbox@17911000 {
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 301eca9a4..057579ae3 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -80,6 +80,10 @@
 	};
 };
 
+&lpass {
+	status = "okay";
+};
+
 &pm8953_resin {
 	status = "okay";
 	linux,code = <KEY_VOLUMEDOWN>;
@@ -239,3 +243,18 @@
 &usb3_dwc3 {
 	dr_mode = "peripheral";
 };
+
+&wcnss {
+	status = "okay";
+
+	vddpx-supply = <&pm8953_l5>;
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+
+	vddxo-supply = <&pm8953_l7>;
+	vddrfa-supply = <&pm8953_l19>;
+	vddpa-supply = <&pm8953_l9>;
+	vdddig-supply = <&pm8953_l5>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 730c8351b..4d7b77a23 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1353,6 +1378,273 @@
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
@@ -1532,7 +1824,7 @@
 		};
 
 		cpufreq_hw: cpufreq@17d43000 {
-			compatible = "qcom,cpufreq-hw";
+			compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw";
 			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
 			reg-names = "freq-domain0", "freq-domain1";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 7e7bf3fb3..1f5173281 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -580,7 +580,7 @@
 &pcie0 {
 	status = "okay";
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
 
@@ -1130,7 +1130,7 @@
 	vdd-rx-supply = <&vreg_s4a_1p8>;
 	vdd-io-supply = <&vreg_s4a_1p8>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,1 {
 			compatible = "sdw10217201000";
 			reg = <0 1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index f942c5afe..99dafc671 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -111,7 +111,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		/* rmtfs upper guard */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 151611339..76bfa7866 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -114,7 +114,7 @@
 
 &adsp_pas {
 	status = "okay";
-	firmware-name = "qcom/sdm845/adsp.mdt";
+	firmware-name = "qcom/sdm845/adsp.mbn";
 };
 
 &apps_rsc {
@@ -415,7 +415,7 @@
 
 &cdsp_pas {
 	status = "okay";
-	firmware-name = "qcom/sdm845/cdsp.mdt";
+	firmware-name = "qcom/sdm845/cdsp.mbn";
 };
 
 &gcc {
@@ -533,6 +533,38 @@
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
 };
 
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
 &pm8998_adc {
 	channel@4c {
 		reg = <ADC5_XO_THERM_100K_PU>;
@@ -609,6 +641,11 @@
 	};
 };
 
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -625,6 +662,52 @@
 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 };
 
+&tlmm {
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio36";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio35";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		clkreq-pins {
+			pins = "gpio103";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio102";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio104";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
 &uart9 {
 	status = "okay";
 };
@@ -718,6 +801,7 @@
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 
 	qcom,snoc-host-cap-8bit-quirk;
+	qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 122c7128d..46e25c538 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -90,7 +91,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 		rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
 			no-map;
@@ -484,14 +485,36 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &q6afedai {
-	qi2s@22 {
-		reg = <22>;
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
 		qcom,sd-lines = <1>;
 	};
 
-	qi2s@23 {
-		reg = <23>;
+	dai@23 {
+		reg = <QUATERNARY_MI2S_TX>;
 		qcom,sd-lines = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
index d97b7f1e7..6e65909ab 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
@@ -15,3 +15,173 @@
 &panel {
 	compatible = "sony,td4353-jdi-tama";
 };
+
+&pmi8998_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "",
+			  "NC",
+			  "NC",
+			  "",
+			  "WLC_EN_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "RSVD(WLC_EN_N)",
+			  "CAM_IO_EN",
+			  "",
+			  "NC";
+};
+
+&tlmm {
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "DISP_RESET_N",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "CAM2_RSTN",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "CAM_SOF",
+			  "TOF_INT",
+			  "TOF_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAIN_CAM_PWR_EN",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_AND",
+			  "DVDT_WRT_DET_OR", /* GPIO_30 */
+			  "WLC_INT_N",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "NC",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_TRXD",
+			  "USB_AUDIO_EN1",
+			  "SW_SERVICE", /* GPIO_50 */
+			  "US_EURO_SEL",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "USB_PD_EN",
+			  "NFC_DWLD_EN",
+			  "NFC_IRQ",
+			  "CODEC_RST_N",
+			  "CODEC_SPI_MISO",
+			  "CODEC_SPI_MOSI",
+			  "CODEC_SPI_CLK",
+			  "CODEC_SPI_CS_N",
+			  "NC",
+			  "CODEC_SLIMBUS_CLK", /* GPIO_70 */
+			  "CODEC_SLIMBUS_DATA0",
+			  "CODEC_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_80 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "TS_RESET_N",
+			  "", /* GPIO_100 */
+			  "GRFC4",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1",
+			  "RF_LCD_ID_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT",
+			  "RF_ID_EXTENTION",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "TRAY_DET",
+			  "GRFC3",
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "GRFC2",
+			  "NC",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "GRFC1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
index 5d2052a0f..82e59e453 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -44,11 +44,179 @@
 	/delete-property/ touch-reset-gpios;
 };
 
+&pmi8998_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "",
+			  "NC",
+			  "NC",
+			  "",
+			  "WLC_EN_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "CAM_IO_EN",
+			  "",
+			  "NC";
+};
+
 &pmi8998_wled {
 	status = "disabled";
 };
 
 &tlmm {
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "DISP_RESET_N",
+			  "SAMD_RSTEN_N",
+			  "CHAT_CAM_PWR_EN",
+			  "CAM2_RSTN",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "MASTER_RST_N",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "CAM_SOF",
+			  "TOF_INT",
+			  "TOF_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAIN_CAM_PWR_EN",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_AND",
+			  "DVDT_WRT_DET_OR", /* GPIO_30 */
+			  "WLC_INT_N",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "NC",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_ERR_FG",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_TRXD",
+			  "USB_AUDIO_EN1",
+			  "SW_SERVICE", /* GPIO_50 */
+			  "US_EURO_SEL",
+			  "SAMD_BOOTL_PIN",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "SDM_SWD_CLK",
+			  "SDM_SWD_DAT",
+			  "SAMD_RST", /* GPIO_60 */
+			  "USB_PD_EN",
+			  "NFC_DWLD_EN",
+			  "NFC_IRQ",
+			  "CODEC_RST_N",
+			  "CODEC_SPI_MISO",
+			  "CODEC_SPI_MOSI",
+			  "CODEC_SPI_CLK",
+			  "CODEC_SPI_CS_N",
+			  "NC",
+			  "CODEC_SLIMBUS_CLK", /* GPIO_70 */
+			  "CODEC_SLIMBUS_DATA0",
+			  "CODEC_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "TX_GTR_THRES_IN",
+			  "MODE_SEL2",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_80 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "TS_RESET_N",
+			  "", /* GPIO_100 */
+			  "GRFC4",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1",
+			  "RF_LCD_ID_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_PWR_REQ",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT",
+			  "RF_ID_EXTENTION",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "TRAY_DET",
+			  "GRFC3",
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "GRFC2",
+			  "TS_VDDIO_EN",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "GRFC1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+
 	ts_vddio_en: ts-vddio-en-state {
 		pins = "gpio133";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
index cd056f780..dc15ab1a2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
@@ -17,3 +17,173 @@
 	height-mm = <112>;
 	width-mm = <56>;
 };
+
+&pmi8998_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "CAM_IO_EN",
+			  "",
+			  "NC";
+};
+
+&tlmm {
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "DISP_RESET_N",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "CAM2_RSTN",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "CAM_SOF",
+			  "TOF_INT",
+			  "TOF_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAIN_CAM_PWR_EN",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_AND",
+			  "DVDT_WRT_DET_OR", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "NC",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_TRXD",
+			  "USB_AUDIO_EN1",
+			  "SW_SERVICE", /* GPIO_50 */
+			  "US_EURO_SEL",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "USB_PD_EN",
+			  "NFC_DWLD_EN",
+			  "NFC_IRQ",
+			  "CODEC_RST_N",
+			  "CODEC_SPI_MISO",
+			  "CODEC_SPI_MOSI",
+			  "CODEC_SPI_CLK",
+			  "CODEC_SPI_CS_N",
+			  "NC",
+			  "CODEC_SLIMBUS_CLK", /* GPIO_70 */
+			  "CODEC_SLIMBUS_DATA0",
+			  "CODEC_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_80 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "TS_RESET_N",
+			  "", /* GPIO_100 */
+			  "GRFC4",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1",
+			  "RF_LCD_ID_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT",
+			  "RF_ID_EXTENTION",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "TRAY_DET",
+			  "GRFC3",
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "GRFC2",
+			  "NC",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "GRFC1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 7ee61b204..b02a1dc5f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -67,6 +67,36 @@
 		};
 	};
 
+	cam_vana_front_vreg: cam-vana-front-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_front_vreg";
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&chat_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam_vana_rear_vreg: cam-vana-rear-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_rear_vreg";
+		gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&main_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam_vio_vreg: cam-vio-reagulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vio_vreg";
+		gpio = <&pmi8998_gpios 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_io_en>;
+		pinctrl-names = "default";
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -524,7 +554,41 @@
 	status = "okay";
 };
 
+&pm8005_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "",
+			  "";
+};
+
 &pm8998_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "FOCUS_N",
+			  "",
+			  "NC",
+			  "VOL_DOWN_N",
+			  "VOL_UP_N",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "FLASH_THERM",
+			  "NC", /* GPIO_10 */
+			  "LCD_ID",
+			  "RF_ID",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "", /* GPIO_20 */
+			  "NFC_CLK_REQ",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+
 	focus_n: focus-n-state {
 		pins = "gpio2";
 		function = PMIC_GPIO_FUNC_NORMAL;
@@ -558,6 +622,17 @@
 	};
 };
 
+&pmi8998_gpios {
+	cam_io_en: cam-io-en-state {
+		pins = "gpio12";
+		function = "normal";
+		qcom,drive-strength = <3>;
+		power-source = <0>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
 &pmi8998_wled {
 	default-brightness = <800>;
 	qcom,switching-freq = <800>;
@@ -626,6 +701,14 @@
 		bias-pull-down;
 	};
 
+	chat_cam_pwr_en: chat-cam-pwr-en-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	sde_te_active_sleep: sde-te-active-sleep-state {
 		pins = "gpio10";
 		function = "mdp_vsync";
@@ -633,6 +716,14 @@
 		bias-pull-down;
 	};
 
+	main_cam_pwr_en: main-cam-pwr-en-state {
+		pins = "gpio27";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	ts_default: ts-default-state {
 		reset-pins {
 			pins = "gpio99";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index c15d48860..6172cd153 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -54,7 +54,7 @@
 				reg = <0x42 0x2>;
 			};
 
-			swm: swm@c85 {
+			swm: soundwire@c85 {
 				compatible = "qcom,soundwire-v1.3.0";
 				reg = <0xc85 0x40>;
 				interrupts-extended = <&wcd9340 20>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 9d6faeb65..617b17b2d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -111,7 +111,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
 
@@ -355,6 +355,28 @@
 	status = "okay";
 };
 
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <1500000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
 &pm8998_resin {
 	linux,code = <KEY_VOLUMEDOWN>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 6db12abaa..e386b504e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -108,7 +108,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 63f651569..237d40486 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -18,6 +18,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
@@ -813,7 +814,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		qseecom_mem: qseecom@8ab00000 {
@@ -1197,8 +1198,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>,
-				 <&pcie0_lane>,
-				 <&pcie1_lane>;
+				 <&pcie0_phy>,
+				 <&pcie1_phy>;
 			clock-names = "bi_tcxo",
 				      "bi_tcxo_ao",
 				      "sleep_clk",
@@ -2305,7 +2306,7 @@
 			};
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -2370,7 +2371,7 @@
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -2378,15 +2379,22 @@
 
 		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sdm845-qmp-pcie-phy";
-			reg = <0 0x01c06000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -2395,22 +2403,9 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x01c06200 0 0x128>,
-				      <0 0x01c06400 0 0x1fc>,
-				      <0 0x01c06800 0 0x218>,
-				      <0 0x01c06600 0 0x70>;
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-			};
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c08000 0 0x2000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2480,7 +2475,7 @@
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -2488,15 +2483,22 @@
 
 		pcie1_phy: phy@1c0a000 {
 			compatible = "qcom,sdm845-qhp-pcie-phy";
-			reg = <0 0x01c0a000 0 0x800>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0a000 0 0x2000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -2505,18 +2507,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c06200 {
-				reg = <0 0x01c0a800 0 0x800>,
-				      <0 0x01c0a800 0 0x800>,
-				      <0 0x01c0b800 0 0x400>;
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
 		};
 
 		mem_noc: interconnect@1380000 {
@@ -2575,7 +2565,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
@@ -2605,30 +2595,50 @@
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
 				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <75000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <150000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2636,16 +2646,9 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -3363,8 +3366,8 @@
 
 			qcom,qmp = <&aoss_qmp>;
 
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
+			power-domains = <&rpmhpd SDM845_LCX>,
+					<&rpmhpd SDM845_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
@@ -3555,11 +3558,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					etf_in: endpoint {
 						remote-endpoint =
 						  <&merge_funnel_out>;
@@ -3984,80 +3984,54 @@
 			nvmem-cells = <&qusb2s_hstx_trim>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x38>,
-			      <0 0x088ea000 0 0x40>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe",
+				      "cfg_ahb";
 
 			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x128>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x128>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4106,7 +4080,7 @@
 				iommus = <&apps_smmu 0x740 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4157,7 +4131,7 @@
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4574,8 +4548,9 @@
 					      "ctrl_link_iface", "stream_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
-				phys = <&dp_phy>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -4913,8 +4888,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 92a812b5f..47dc42f6e 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -392,6 +392,8 @@
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+
+		wakeup-source;
 	};
 };
 
@@ -408,6 +410,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -482,6 +486,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c11_hid_active>;
+
+		wakeup-source;
 	};
 };
 
@@ -797,7 +803,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
index 543837316..26217836c 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -658,7 +658,7 @@
 	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
 	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
 
-	swm: swm@c85 {
+	swm: soundwire@c85 {
 		left_spkr: speaker@0,3 {
 			compatible = "sdw10217211000";
 			reg = <0 3>;
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index a14e0650c..f76e72fb2 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index e180aa402..7dbdf8ca6 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sdx75.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
@@ -203,6 +205,19 @@
 		};
 	};
 
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sdx75-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		clocks = <&rpmhcc RPMH_QPIC_CLK>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sdx75-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x0>;
@@ -434,6 +449,9 @@
 			clock-names = "m-ahb",
 				      "s-ahb";
 			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -444,6 +462,12 @@
 				reg = <0x0 0x00984000 0x0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&qupv3_se1_2uart_active>;
 				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
@@ -453,12 +477,144 @@
 			};
 		};
 
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x00ff4000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx75-qmp-usb3-uni-phy";
+			reg = <0x0 0x00ff6000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB2_CLKREF_EN>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,sdx75-system-noc";
+			reg = <0x0 0x01640000 0x0 0x4b400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_anoc: interconnect@16c0000 {
+			compatible = "qcom,sdx75-pcie-anoc";
+			reg = <0x0 0x016c0000 0x0 0x14200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 10 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x80 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>,
+				       <&usb_qmpphy>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sdx75-pdc", "qcom,pdc";
 			reg = <0x0 0xb220000 0x0 0x30000>,
@@ -733,6 +889,20 @@
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
 		};
+
+		dc_noc: interconnect@190e0000 {
+			compatible = "qcom,sdx75-dc-noc";
+			reg = <0x0 0x190e0000 0x0 0x8200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sdx75-gem-noc";
+			reg = <0x0 0x19100000 0x0 0x34080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index 75951fd43..2c7a12983 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -225,13 +225,13 @@
 	vcc-max-microamp = <600000>;
 	vccq2-supply = <&vreg_l11a>;
 	vccq2-max-microamp = <600000>;
+	vdd-hba-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
 &ufs_mem_phy {
 	vdda-phy-supply = <&vreg_l4a>;
 	vdda-pll-supply = <&vreg_l12a>;
-	vddp-ref-clk-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
index 00a1c81ca..866e93783 100644
--- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -10,9 +10,23 @@
 	model = "Qualcomm Technologies, Inc. SM4450 QRD";
 	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
 
-	aliases { };
+	aliases {
+		serial0 = &uart7;
+	};
 
 	chosen {
-		bootargs = "console=hvc0";
+		stdout-path = "serial0:115200n8";
 	};
 };
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index c4e5b33f5..3e7ae3beb 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,8 +3,11 @@
  * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -328,6 +331,18 @@
 		};
 	};
 
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -335,6 +350,43 @@
 		dma-ranges = <0 0 0 0 0x10 0>;
 		compatible = "simple-bus";
 
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm4450-gcc";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x2000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			uart7: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -351,6 +403,32 @@
 			interrupt-controller;
 		};
 
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm4450-tlmm";
+			reg = <0x0 0x0f100000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 137>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio23";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio22";
+				function = "qup1_se2_l2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		intc: interrupt-controller@17200000 {
 			compatible = "arm,gic-v3";
 			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
@@ -419,6 +497,35 @@
 				status = "disabled";
 			};
 		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm4450-rpmh-clk";
+				#clock-cells = <1>;
+				clocks = <&xo_board>;
+				clock-names = "xo";
+			};
+		};
+
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 9b70a8790..98eb072fa 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -219,13 +219,13 @@
 	vcc-max-microamp = <600000>;
 	vccq2-supply = <&pm6125_l11a>;
 	vccq2-max-microamp = <600000>;
+	vdd-hba-supply = <&pm6125_l18a>;
 	status = "okay";
 };
 
 &ufs_mem_phy {
 	vdda-phy-supply = <&pm6125_l4a>;
 	vdda-pll-supply = <&pm6125_l12a>;
-	vddp-ref-clk-supply = <&pm6125_l18a>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 839c60351..d33763d09 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
+#include <dt-bindings/interconnect/qcom,sm6115.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 
@@ -264,6 +266,8 @@
 		scm: scm {
 			compatible = "qcom,scm-sm6115", "qcom,scm";
 			#reset-cells = <1>;
+			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
 		};
 	};
 
@@ -273,6 +277,25 @@
 		reg = <0 0x80000000 0 0>;
 	};
 
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -591,6 +614,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr_regs: syscon@3c0000 {
+			compatible = "qcom,sm6115-tcsr", "syscon";
+			reg = <0x0 0x003c0000 0x0 0x40000>;
+		};
+
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
 			reg = <0x0 0x00500000 0x0 0x400000>,
@@ -856,9 +884,48 @@
 
 			#phy-cells = <0>;
 
+			qcom,tcsr-reg = <&tcsr_regs 0xb244>;
+
 			status = "disabled";
 		};
 
+		system_noc: interconnect@1880000 {
+			compatible = "qcom,sm6115-snoc";
+			reg = <0x0 0x01880000 0x0 0x5f080>;
+			clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>;
+			clock-names = "cpu_axi",
+				      "ufs_axi",
+				      "usb_axi",
+				      "ipa";
+			#interconnect-cells = <2>;
+
+			clk_virt: interconnect-clk {
+				compatible = "qcom,sm6115-clk-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmrt_virt: interconnect-mmrt {
+				compatible = "qcom,sm6115-mmrt-virt";
+				#interconnect-cells = <2>;
+			};
+
+			mmnrt_virt: interconnect-mmnrt {
+				compatible = "qcom,sm6115-mmnrt-virt";
+				#interconnect-cells = <2>;
+			};
+		};
+
+		config_noc: interconnect@1900000 {
+			compatible = "qcom,sm6115-cnoc";
+			reg = <0x0 0x01900000 0x0 0x6200>;
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>;
+			clock-names = "usb_axi";
+			#interconnect-cells = <2>;
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -883,6 +950,60 @@
 			clock-names = "core";
 		};
 
+		pmu@1b8e300 {
+			compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x01b8e300 0x0 0x600>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <(1353 * 4 * 1000)>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+			};
+		};
+
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x01c40000 0x0 0x1100>,
@@ -912,6 +1033,12 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		bimc: interconnect@4480000 {
+			compatible = "qcom,sm6115-bimc";
+			reg = <0x0 0x04480000 0x0 0x80000>;
+			#interconnect-cells = <2>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -939,8 +1066,42 @@
 				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
 			clock-names = "iface", "core", "xo", "ice";
 
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			bus-width = <8>;
 			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <102400 65000>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <204800 200000>;
+				};
+			};
 		};
 
 		sdhc_2: mmc@4784000 {
@@ -961,6 +1122,12 @@
 			operating-points-v2 = <&sdhc2_opp_table>;
 			iommus = <&apps_smmu 0x00a0 0x0>;
 			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
 
 			bus-width = <4>;
 			qcom,dll-config = <0x0007642c>;
@@ -973,11 +1140,15 @@
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <250000 133320>;
+					opp-avg-kBps = <261438 150000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <800000 300000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -987,7 +1158,7 @@
 			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
@@ -1028,24 +1199,17 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0x0 0x04807000 0x0 0x1000>;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 			clock-names = "ref", "ref_aux";
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x0 0x04807600 0x0 0x130>,
-				      <0x0 0x04807c00 0x0 0x16c>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
@@ -1091,6 +1255,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1107,6 +1280,15 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1123,6 +1305,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1139,6 +1330,15 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1155,6 +1355,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1171,6 +1380,15 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1187,6 +1405,15 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1203,11 +1430,37 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			uart3: serial@4a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+				status = "disabled";
+			};
+
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a90000 0x0 0x4000>;
@@ -1219,6 +1472,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1235,6 +1497,15 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1246,6 +1517,12 @@
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1260,6 +1537,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1562,15 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
 				dma-names = "tx", "rx";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
+						 &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
+						<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+						 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
+						<&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
+						 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1307,7 +1602,14 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
+			 /* TODO: USB<->IPA path */
+			interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			status = "disabled";
 
 			usb_dwc3: usb@4e00000 {
@@ -1478,6 +1780,13 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
+			interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG
+					 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2566,54 +2875,54 @@
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0f120000 0x0 0x1000>;
 			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x0 0x20000000>;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0 0x0f123000 0x0 0x1000>;
+				reg = <0x0 0x0f123000 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0 0x0f124000 0x0 0x1000>;
+				reg = <0x0 0x0f124000 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0 0x0f125000 0x0 0x1000>;
+				reg = <0x0 0x0f125000 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0 0x0f126000 0x0 0x1000>;
+				reg = <0x0 0x0f126000 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0 0x0f127000 0x0 0x1000>;
+				reg = <0x0 0x0f127000 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0 0x0f128000 0x0 0x1000>;
+				reg = <0x0 0x0f128000 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index c2d15fc6c..54da053a8 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -344,13 +344,13 @@
 	vcc-max-microamp = <600000>;
 	vccq2-supply = <&pm6125_l11>;
 	vccq2-max-microamp = <600000>;
+	vdd-hba-supply = <&pm6125_l18>;
 	status = "okay";
 };
 
 &ufs_mem_phy {
 	vdda-phy-supply = <&pm6125_l4>;
 	vdda-pll-supply = <&pm6125_l12>;
-	vddp-ref-clk-supply = <&pm6125_l18>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index fb4cba004..08046f866 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -179,6 +179,43 @@
 	/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,sofef01-m-ams597ut01";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&pm6125_l12>;
+
+		pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>;
+		pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
 &pm6125_adc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
@@ -474,6 +511,28 @@
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	mdss_te_active_sleep: mdss-te-active-sleep-state {
+		pins = "gpio89";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio90";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
+		pins = "gpio90";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 };
 
 &usb3 {
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
index 272bc85f1..a49d3ebb1 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -400,15 +400,13 @@
 	vccq2-supply = <&vreg_l11a>;
 	vcc-max-microamp = <600000>;
 	vccq2-max-microamp = <600000>;
+	vdd-hba-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
 &ufs_mem_phy {
 	vdda-phy-supply = <&vreg_l4a>;
 	vdda-pll-supply = <&vreg_l10a>;
-	vdda-phy-max-microamp = <51400>;
-	vdda-pll-max-microamp = <14200>;
-	vddp-ref-clk-supply = <&vreg_l18a>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 07081088b..1dd3a4056 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -22,7 +23,6 @@
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
 		};
 
 		sleep_clk: sleep-clk {
@@ -198,6 +198,8 @@
 				rpmcc: clock-controller {
 					compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
 					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
 				};
 
 				rpmpd: power-controller {
@@ -683,6 +685,24 @@
 			status = "disabled";
 		};
 
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
@@ -699,7 +719,7 @@
 
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x160 0x0>;
 
@@ -726,7 +746,7 @@
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			iommus = <&apps_smmu 0x180 0x0>;
 
@@ -1192,22 +1212,221 @@
 			reg = <0x04690000 0x10000>;
 		};
 
-		spmi_bus: spmi@1c40000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x01c40000 0x1100>,
-			      <0x01e00000 0x2000000>,
-			      <0x03e00000 0x100000>,
-			      <0x03f00000 0xa0000>,
-			      <0x01c0a000 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6125-mdss";
+			reg = <0x05e00000 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
-			#interrupt-cells = <4>;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x400 0x0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6125-dpu";
+				reg = <0x05e01000 0x83208>,
+				      <0x05eb0000 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+					 <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "rot",
+					      "lut",
+					      "core",
+					      "vsync",
+					      "throttle";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6125_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-400000000 {
+						opp-hz = /bits/ 64 <400000000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x05e94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6125_VDDCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,sm6125-dsi-phy-14nm";
+				reg = <0x05e94400 0x100>,
+				      <0x05e94500 0x300>,
+				      <0x05e94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				required-opps = <&rpmpd_opp_nom>;
+				power-domains = <&rpmpd SM6125_VDDMX>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6125-dispcc";
+			reg = <0x05f00000 0x20000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "cfg_ahb_clk",
+				      "gcc_disp_gpll0_div_clk_src";
+
+			required-opps = <&rpmpd_opp_ret>;
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 		};
 
 		apps_smmu: iommu@c600000 {
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 6464e144c..753210758 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1142,7 +1142,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1187,10 +1187,7 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm6350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
 
 			clock-names = "ref",
 				      "ref_aux";
@@ -1200,16 +1197,9 @@
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
 
-			status = "disabled";
+			#phy-cells = <0>;
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x128>,
-				      <0 0x01d87600 0 0x1fc>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x128>,
-				      <0 0x01d87a00 0 0x1fc>;
-				#phy-cells = <0>;
-			};
+			status = "disabled";
 		};
 
 		ipa: ipa@1e40000 {
@@ -1259,7 +1249,7 @@
 			compatible = "qcom,sm6350-adsp-pas";
 			reg = <0 0x03000000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -1519,7 +1509,7 @@
 			compatible = "qcom,sm6350-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b2f1bb1d5..cca2c2eb8 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -80,6 +80,15 @@
 		};
 	};
 
+	touch_avdd: touch-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_avdd";
+		gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_avdd_default>;
+		enable-active-high;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -136,9 +145,10 @@
 		interrupts = <22 0x2008>;
 
 		vdd-supply = <&pm6125_l13>;
+		avdd-supply = <&touch_avdd>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+		pinctrl-0 = <&ts_int_default>;
 	};
 };
 
@@ -187,6 +197,11 @@
 	status = "okay";
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/sm6375/Sony/murray/modem.mbn";
+	status = "okay";
+};
+
 &rpm_requests {
 	regulators-0 {
 		compatible = "qcom,rpm-pm6125-regulators";
@@ -238,8 +253,8 @@
 		};
 
 		pm6125_l7: l7 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
 		};
 
 		pm6125_l8: l8 {
@@ -306,7 +321,7 @@
 
 		pm6125_l21: l21 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l22: l22 {
@@ -317,7 +332,7 @@
 
 		pm6125_l23: l23 {
 			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3400000>;
+			regulator-max-microvolt = <3312000>;
 		};
 
 		pm6125_l24: l24 {
@@ -340,8 +355,8 @@
 		};
 
 		pmr735a_l2: l2 {
-			regulator-min-microvolt = <352000>;
-			regulator-max-microvolt = <796000>;
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <640000>;
 		};
 
 		pmr735a_l3: l3 {
@@ -412,7 +427,7 @@
 		pins = "gpio59";
 		function = "gpio";
 		drive-strength = <8>;
-		output-high;
+		output-low;
 	};
 };
 
@@ -425,6 +440,18 @@
 };
 
 &usb_1_hsphy {
+	vdda-pll-supply = <&pm6125_l7>;
+	vdda18-supply = <&pm6125_l10>;
+	vdda33-supply = <&pmr735a_l7>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pmr735a_l2>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l2>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	vdd-3.3-ch1-supply = <&pm6125_l21>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e56f7ea4e..a74472ac6 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -916,6 +916,36 @@
 				drive-strength = <6>;
 				bias-disable;
 			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				cts-pins {
+					pins = "gpio61";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				rts-pins {
+					pins = "gpio62";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				tx-pins {
+					pins = "gpio63";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio64";
+					function = "qup01";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		gcc: clock-controller@1400000 {
@@ -1138,6 +1168,19 @@
 				status = "disabled";
 			};
 
+			uart1: serial@4a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				pinctrl-0 = <&qup_uart1_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0x0 0x04a88000 0x0 0x4000>;
@@ -1516,7 +1559,7 @@
 			compatible = "qcom,sm6375-adsp-pas";
 			reg = <0 0x0a400000 0 0x100>;
 
-			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
new file mode 100644
index 000000000..e55cd83c1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-common.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7125.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM7125 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8400000>;
+			no-map;
+		};
+
+		venus_mem: memory@8ee00000 {
+			reg = <0x0 0x8ee00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@8f300000 {
+			reg = <0x0 0x8f300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@91100000 {
+			reg = <0x0 0x91100000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: memory@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		gpu_mem: memory@93b15000 {
+			reg = <0x0 0x93b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@9d800000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9d800000 0x0 0x400000>;
+			record-size = <0x80000>;
+			pmsg-size = <0x200000>;
+			console-size = <0x100000>;
+		};
+
+		rmtfs_mem: memory@fa601000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xfa601000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a_0p88: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p664: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p1: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_3p0: ldo18 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p23: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_3p0: ldo6 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6150_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm6150_rtc {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_3p0>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p88>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p23>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
new file mode 100644
index 000000000..e010d1957
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125-xiaomi-joyeuse.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm7125-xiaomi-common.dtsi"
+
+/ {
+	model = "Xiaomi Redmi Note 9 Pro (Global)";
+	compatible = "xiaomi,joyeuse", "qcom,sm7125";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0x50022 1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7125.dtsi b/arch/arm64/boot/dts/qcom/sm7125.dtsi
new file mode 100644
index 000000000..12dd72859
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7125.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include "sc7180.dtsi"
+
+/* SM7125 uses Kryo 465 instead of Kryo 468 */
+&CPU0 { compatible = "qcom,kryo465"; };
+&CPU1 { compatible = "qcom,kryo465"; };
+&CPU2 { compatible = "qcom,kryo465"; };
+&CPU3 { compatible = "qcom,kryo465"; };
+&CPU4 { compatible = "qcom,kryo465"; };
+&CPU5 { compatible = "qcom,kryo465"; };
+&CPU6 { compatible = "qcom,kryo465"; };
+&CPU7 { compatible = "qcom,kryo465"; };
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 18171c5d8..ade619805 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -5,9 +5,14 @@
 
 /dts-v1/;
 
+/* PM7250B is configured to use SID2/3 */
+#define PM7250B_SID 2
+#define PM7250B_SID1 3
+
 /* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
 #define PMK8350_SID 6
 
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/input.h>
@@ -75,7 +80,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 	};
 
@@ -386,36 +391,10 @@
 };
 
 &i2c10 {
-	clock-frequency = <400000>;
-	status = "okay";
-
 	/* PM8008 PMIC @ 8 and 9 */
 	/* PX8618 @ 26 */
 	/* SMB1395 PMIC @ 34 */
-
-	haptics@5a {
-		compatible = "awinic,aw8695";
-		reg = <0x5a>;
-		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-
-		awinic,f0-preset = <2350>;
-		awinic,f0-coefficient = <260>;
-		awinic,f0-calibration-percent = <7>;
-		awinic,drive-level = <125>;
-
-		awinic,f0-detection-play-time = <5>;
-		awinic,f0-detection-wait-time = <3>;
-		awinic,f0-detection-repeat = <2>;
-		awinic,f0-detection-trace = <15>;
-
-		awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
-		awinic,tset = /bits/ 8 <0x12>;
-		awinic,r-spare = /bits/ 8 <0x68>;
-
-		awinic,bemf-upper-threshold = <4104>;
-		awinic,bemf-lower-threshold = <1016>;
-	};
+	/* awinic,aw8695 @ 5a */
 };
 
 &ipa {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index f4c6e1309..de670b407 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -54,6 +55,17 @@
 			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -363,15 +375,210 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &gpu {
-	/*
-	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
-	 * after display support is added on this board.
-	 */
-	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
 	status = "okay";
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pm8150b_typec_sbu_out>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s4a_1p8>;
+		vcc-supply = <&vreg_bob>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p875>;
+	status = "okay";
+};
+
+&pm8150b_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <3000000>;
+	status = "okay";
+};
+
+&pm8150b_typec {
+	status = "okay";
+
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		altmodes {
+			displayport {
+				svid = /bits/ 16 <0xff01>;
+				vdo = <0x00001c46>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm8150b_typec_mux_in: endpoint {
+					remote-endpoint = <&usb_1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				pm8150b_typec_sbu_out: endpoint {
+					remote-endpoint = <&fsa4480_sbu_mux>;
+				};
+			};
+		};
+	};
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -382,6 +589,10 @@
 	linux,code = <KEY_VOLUMEDOWN>;
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -406,6 +617,13 @@
 
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-disable;
+	};
+
 };
 
 &uart2 {
@@ -450,6 +668,19 @@
 	status = "okay";
 	vdda-phy-supply = <&vreg_l3c_1p2>;
 	vdda-pll-supply = <&vreg_l18a_0p8>;
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pm8150b_typec_mux_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
 };
 
 &usb_2_qmpphy {
@@ -467,7 +698,16 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 };
 
 &usb_2_dwc3 {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index f7e35e220..2abd4c87a 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -5,7 +5,9 @@
  */
 
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -720,7 +722,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		camera_mem: memory@8b700000 {
@@ -1822,7 +1824,7 @@
 			      <0x0 0x010ad000 0x0 0x3000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1873,11 +1875,11 @@
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -1887,18 +1889,22 @@
 
 		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
-			reg = <0 0x01c06000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
-				      "refgen";
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1907,21 +1913,9 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x01c06200 0 0x170>, /* tx */
-				      <0 0x01c06400 0 0x200>, /* rx */
-				      <0 0x01c06800 0 0x1f0>, /* pcs */
-				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-			};
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8150";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1975,10 +1969,10 @@
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1989,18 +1983,22 @@
 
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
-			reg = <0 0x01c0e000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0e000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
-				      "refgen";
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -2009,20 +2007,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
-				      <0 0x01c0e400 0 0x200>, /* rx0 */
-				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x01c0e600 0 0x170>, /* tx1 */
-				      <0 0x01c0e800 0 0x200>, /* rx1 */
-				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
 		};
 
 		ufs_mem_hc: ufshc@1d84000 {
@@ -2032,7 +2016,7 @@
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2077,10 +2061,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2090,16 +2072,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2973,11 +2949,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+				port {
 					replicator1_in: endpoint {
 						remote-endpoint = <&replicator_out1>;
 					};
@@ -3442,69 +3415,77 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
-			compatible = "qcom,sm8150-qmp-usb3-phy";
-			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8150-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x218>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
 			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>,
-				      <0 0x088eb600 0 0x200>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3614,8 +3595,27 @@
 				iommus = <&apps_smmu 0x140 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};
 
@@ -3667,7 +3667,7 @@
 				iommus = <&apps_smmu 0x160 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -3746,6 +3746,13 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -3773,6 +3780,86 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
@@ -3949,8 +4036,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index ecdc20bc1..e07d0311e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -18,7 +18,12 @@
 	qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
 	qcom,board-id = <0x10008 0>;
 
+	aliases {
+		serial0 = &uart12;
+	};
+
 	chosen {
+		stdout-path = "serial0:115200n8";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 85e5cf3dc..946365f15 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
 #include "sm8250.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -23,7 +24,7 @@
 /delete-node/ &xbl_aop_mem;
 
 / {
-	classis-type = "tablet";
+	chassis-type = "tablet";
 
 	/* required for bootloader to select correct board */
 	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
@@ -114,7 +115,7 @@
 	};
 
 	reserved-memory {
-		xbl_aop_mem: xbl-aop@80700000 {
+		xbl_aop_mem: xbl-aop@80600000 {
 			reg = <0x0 0x80600000 0x0 0x260000>;
 			no-map;
 		};
@@ -627,6 +628,41 @@
 	};
 };
 
+&pm8150b_typec {
+	vdd-pdphy-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "source";
+		data-role = "dual";
+		self-powered;
+
+		source-pdos = <PDO_FIXED(5000, 3000,
+					 PDO_FIXED_DUAL_ROLE |
+					 PDO_FIXED_USB_COMM |
+					 PDO_FIXED_DATA_SWAP)>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				pm8150b_role_switch_in: endpoint {
+					remote-endpoint = <&usb_1_role_switch_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm8150b_vbus {
+	status = "okay";
+};
+
 &pon_pwrkey {
 	status = "okay";
 };
@@ -664,11 +700,12 @@
 };
 
 &usb_1_dwc3 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 };
 
 &usb_1_hsphy {
@@ -678,6 +715,10 @@
 	status = "okay";
 };
 
+&usb_1_role_switch_out {
+	remote-endpoint = <&pm8150b_role_switch_in>;
+};
+
 &ufs_mem_hc {
 	vcc-supply = <&vreg_l17a_3p0>;
 	vcc-max-microamp = <800000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
new file mode 100644
index 000000000..86e1f7fd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+
+	model = "Xiaomi Pad 6";
+	compatible = "xiaomi,pipa", "qcom,sm8250";
+
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1800>;
+			height = <2880>;
+			stride = <(1800 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16700000>;
+		charge-full-design-microamp-hours = <4420000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1a98481d0..b07a3bad6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -371,6 +372,12 @@
 		};
 	};
 
+	qup_virt: interconnect-qup-virt {
+		compatible = "qcom,sm8250-qup-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -664,6 +671,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8250", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -1023,6 +1031,13 @@
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1039,6 +1054,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1055,6 +1076,13 @@
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1071,6 +1099,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1087,6 +1121,13 @@
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1103,6 +1144,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1119,6 +1166,13 @@
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1135,6 +1189,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1150,6 +1210,10 @@
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1164,6 +1228,13 @@
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1180,6 +1251,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1195,6 +1272,10 @@
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1209,6 +1290,13 @@
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1225,6 +1313,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1277,6 +1371,13 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1293,6 +1394,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1309,6 +1416,13 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1325,6 +1439,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1341,6 +1461,13 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1357,6 +1484,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1372,6 +1505,10 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1386,6 +1523,13 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1402,6 +1546,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1418,6 +1568,13 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1434,6 +1591,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1450,6 +1613,13 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1466,6 +1636,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1482,6 +1658,13 @@
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1498,6 +1681,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1513,6 +1702,10 @@
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1527,6 +1720,13 @@
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1543,6 +1743,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1592,6 +1798,13 @@
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1608,6 +1821,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1624,6 +1843,13 @@
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1640,6 +1866,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1656,6 +1888,13 @@
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1672,6 +1911,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1688,6 +1933,13 @@
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1704,6 +1956,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1720,6 +1978,13 @@
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1736,6 +2001,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1751,6 +2022,10 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1765,6 +2040,13 @@
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1781,6 +2063,12 @@
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd RPMHPD_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1836,7 +2124,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1898,7 +2186,7 @@
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
@@ -1913,15 +2201,23 @@
 
 		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
-			reg = <0 0x01c06000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x1000>;
+
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
-				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1930,23 +2226,9 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x01c06200 0 0x170>, /* tx */
-				      <0 0x01c06400 0 0x200>, /* rx */
-				      <0 0x01c06800 0 0x1f0>, /* pcs */
-				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-			};
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -2005,7 +2287,7 @@
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
@@ -2020,15 +2302,23 @@
 
 		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
-			reg = <0 0x01c0e000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0e000 0 0x1000>;
+
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -2037,25 +2327,9 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
-				      <0 0x01c0e400 0 0x200>, /* rx0 */
-				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x01c0e600 0 0x170>, /* tx1 */
-				      <0 0x01c0e800 0 0x200>, /* rx1 */
-				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
 		};
 
-		pcie2: pci@1c10000 {
+		pcie2: pcie@1c10000 {
 			compatible = "qcom,pcie-sm8250";
 			reg = <0 0x01c10000 0 0x3000>,
 			      <0 0x64000000 0 0xf1d>,
@@ -2114,7 +2388,7 @@
 
 			power-domains = <&gcc PCIE_2_GDSC>;
 
-			phys = <&pcie2_lane>;
+			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
@@ -2129,15 +2403,23 @@
 
 		pcie2_phy: phy@1c16000 {
 			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
-			reg = <0 0x01c16000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c16000 0 0x1000>;
+
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_2_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
 			reset-names = "phy";
@@ -2146,22 +2428,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie2_lane: phy@1c16200 {
-				reg = <0 0x01c16200 0 0x170>, /* tx0 */
-				      <0 0x01c16400 0 0x200>, /* rx0 */
-				      <0 0x01c16a00 0 0x1f0>, /* pcs */
-				      <0 0x01c16600 0 0x170>, /* tx1 */
-				      <0 0x01c16800 0 0x200>, /* rx1 */
-				      <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_2_pipe_clk";
-			};
 		};
 
 		ufs_mem_hc: ufshc@1d84000 {
@@ -2169,7 +2435,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2198,29 +2464,48 @@
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
-			freq-table-hz =
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
+
+			operating-points-v2 = <&ufs_opp_table>;
 
 			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
 			interconnect-names = "ufs-ddr", "cpu-ufs";
 
 			status = "disabled";
+
+			ufs_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-37500000 {
+					opp-hz = /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <37500000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <300000000>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>,
+						 /bits/ 64 <0>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
 		};
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8250-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -2228,16 +2513,10 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -2278,6 +2557,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8250-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		wsamacro: codec@3240000 {
 			compatible = "qcom,sm8250-lpass-wsa-macro";
 			reg = <0 0x03240000 0 0x1000>;
@@ -2300,7 +2584,7 @@
 			status = "disabled";
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			reg = <0 0x03250000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
@@ -2366,7 +2650,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			reg = <0 0x03210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			status = "disabled";
@@ -2413,7 +2697,7 @@
 		};
 
 		/* tx macro */
-		swr2: soundwire-controller@3230000 {
+		swr2: soundwire@3230000 {
 			reg = <0 0x03230000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -2741,7 +3025,7 @@
 			compatible = "qcom,sm8250-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2830,11 +3114,8 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					tpda_out_funnel_qatb: endpoint {
 						remote-endpoint = <&funnel_qatb_in_tpda>;
 					};
@@ -2877,11 +3158,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_qatb_in_tpda: endpoint {
 						remote-endpoint = <&tpda_out_funnel_qatb>;
 					};
@@ -3090,11 +3367,8 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
+				port {
 					etf_in_funnel_swao_out: endpoint {
 						remote-endpoint = <&funnel_swao_out_etf>;
 					};
@@ -3178,8 +3452,6 @@
 			clock-names = "apb_pclk";
 
 			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				port {
 					tpdm_mm_out_tpda9: endpoint {
 						remote-endpoint = <&tpda_9_in_tpdm_mm>;
@@ -3445,11 +3717,7 @@
 			};
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
+				port {
 					funnel_apss_merg_in_funnel_apss: endpoint {
 					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
 					};
@@ -3461,7 +3729,7 @@
 			compatible = "qcom,sm8250-cdsp-pas";
 			reg = <0 0x08300000 0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3580,78 +3848,70 @@
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_1_qmpphy_out: endpoint {};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {};
+				};
 			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x200>,
-				      <0 0x088eb400 0 0x200>,
-				      <0 0x088eb800 0 0x800>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
@@ -3878,6 +4138,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
@@ -3892,8 +4153,12 @@
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch_out: endpoint {};
+				};
 			};
 		};
 
@@ -3942,6 +4207,7 @@
 					  "dp_hs_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
+			wakeup-source;
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
@@ -3956,7 +4222,7 @@
 				iommus = <&apps_smmu 0x20 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4383,6 +4649,14 @@
 							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -4410,6 +4684,85 @@
 				};
 			};
 
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8250-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SM8250_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
 			mdss_dsi0: dsi@ae94000 {
 				compatible = "qcom,sm8250-dsi-ctrl",
 					     "qcom,mdss-dsi-ctrl";
@@ -4586,8 +4939,8 @@
 				 <&mdss_dsi0_phy 1>,
 				 <&mdss_dsi1_phy 0>,
 				 <&mdss_dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
@@ -5534,7 +5887,7 @@
 			compatible = "qcom,sm8250-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 4013d25a7..b43d264ed 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -7,7 +7,12 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8350 HDK";
@@ -294,6 +299,81 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_s3e_2p20: smps3 {
+			regulator-name = "vreg_s3e_2p20";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		vreg_l1e_0p9: ldo1 {
+			regulator-name = "vreg_l1e_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		vreg_l2e_1p2: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		vreg_l5e_0p8: ldo5 {
+			regulator-name = "vreg_l5e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6e_0p8: ldo6 {
+			regulator-name = "vreg_l6e_0p8";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		vreg_l7e_2p8: ldo7 {
+			regulator-name = "vreg_l7e_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
 };
 
 &cdsp {
@@ -760,6 +840,7 @@
 	vcc-max-microamp = <800000>;
 	vccq-supply = <&vreg_l9b_1p2>;
 	vccq-max-microamp = <900000>;
+	vdd-hba-supply = <&vreg_l9b_1p2>;
 };
 
 &ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index c5a6c8745..8bee57f3b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -325,6 +325,7 @@
 	vcc-max-microamp = <800000>;
 	vccq-supply = <&vreg_l9b_1p2>;
 	vccq-max-microamp = <900000>;
+	vdd-hba-supply = <&vreg_l9b_1p2>;
 };
 
 &ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index a7cf506f2..e78c83a89 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -288,6 +289,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8350", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
 			#reset-cells = <1>;
 		};
 	};
@@ -503,7 +505,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		hyp_reserved_mem: memory@d0000000 {
@@ -676,9 +678,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -1497,7 +1499,7 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1590,7 +1592,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8350";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1678,7 +1680,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1722,10 +1724,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1733,17 +1733,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		cryptobam: dma-controller@1dc4000 {
@@ -1817,6 +1811,11 @@
 			#hwlock-cells = <1>;
 		};
 
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8350-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
 		lpass_tlmm: pinctrl@33c0000 {
 			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
 			reg = <0 0x033c0000 0 0x20000>,
@@ -2020,7 +2019,7 @@
 			compatible = "qcom,sm8350-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2062,7 +2061,7 @@
 			compatible = "qcom,sm8350-slpi-pas";
 			reg = <0 0x05c00000 0 0x4000>;
 
-			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2237,34 +2236,27 @@
 			};
 		};
 
-		usb_2_qmpphy: phy-wrapper@88eb000 {
+		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x200>;
+			reg = <0 0x088eb000 0 0x2000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
-			usb_2_ssphy: phy@88ebe00 {
-				reg = <0 0x088ebe00 0 0x200>,
-				      <0 0x088ec000 0 0x200>,
-				      <0 0x088eb200 0 0x1100>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
 		};
 
 		dc_noc: interconnect@90c0000 {
@@ -2417,7 +2409,7 @@
 				iommus = <&apps_smmu 0x20 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -2452,35 +2444,6 @@
 			#size-cells = <2>;
 			ranges;
 
-			dpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/* TODO: opp-200000000 should work with
-				 * &rpmhpd_opp_low_svs, but one some of
-				 * sm8350_hdk boards reboot using this
-				 * opp.
-				 */
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-300000000 {
-					opp-hz = /bits/ 64 <300000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-345000000 {
-					opp-hz = /bits/ 64 <345000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-460000000 {
-					opp-hz = /bits/ 64 <460000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-			};
-
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sm8350-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
@@ -2509,6 +2472,35 @@
 				interrupt-parent = <&mdss>;
 				interrupts = <0>;
 
+				dpu_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-200000000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -3206,7 +3198,7 @@
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
 
-			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -3511,7 +3503,7 @@
 			compatible = "qcom,sm8350-cdsp-pas";
 			reg = <0 0x98900000 0 0x1400000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index bd5e8181f..31e74160b 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -580,6 +580,14 @@
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8450/a730_zap.mbn";
+	};
+};
+
 &i2c9 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -915,14 +923,23 @@
 			"SpkrRight IN", "WSA_SPK2 OUT",
 			"IN1_HPHL", "HPHL_OUT",
 			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
 			"AMIC2", "MIC BIAS2",
-			"VA DMIC0", "MIC BIAS1",
-			"VA DMIC1", "MIC BIAS1",
-			"VA DMIC2", "MIC BIAS3",
-			"TX DMIC0", "MIC BIAS1",
-			"TX DMIC1", "MIC BIAS2",
-			"TX DMIC2", "MIC BIAS3",
-			"TX SWR_ADC1", "ADC2_OUTPUT";
+			"AMIC3", "MIC BIAS3",
+			"AMIC4", "MIC BIAS3",
+			"AMIC5", "MIC BIAS4",
+			"VA DMIC0", "MIC BIAS3",
+			"VA DMIC1", "MIC BIAS3",
+			"VA DMIC2", "MIC BIAS1",
+			"VA DMIC3", "MIC BIAS1",
+			"TX DMIC0", "MIC BIAS3",
+			"TX DMIC1", "MIC BIAS3",
+			"TX DMIC2", "MIC BIAS1",
+			"TX DMIC3", "MIC BIAS1",
+			"TX SWR_INPUT0", "ADC1_OUTPUT",
+			"TX SWR_INPUT1", "ADC2_OUTPUT",
+			"TX SWR_INPUT0", "ADC3_OUTPUT",
+			"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 	wcd-playback-dai-link {
 		link-name = "WCD Playback";
@@ -1073,6 +1090,7 @@
 	vcc-max-microamp = <1100000>;
 	vccq-supply = <&vreg_l9b_1p2>;
 	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l9b_1p2>;
 };
 
 &ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 374793277..c7d05945a 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -443,6 +443,7 @@
 	vcc-max-microamp = <1100000>;
 	vccq-supply = <&vreg_l9b_1p2>;
 	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l9b_1p2>;
 };
 
 &ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index 001fb2723..8b29fcf48 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -80,7 +80,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		ramoops@ffc00000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 79cc8fbcd..b72a48c1d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -8,8 +8,10 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -17,6 +19,7 @@
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 #include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
@@ -540,7 +543,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		xbl_sc_mem2: memory@a6e00000 {
@@ -750,12 +753,12 @@
 			#power-domain-cells = <1>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <&pcie0_lane>,
-				 <&pcie1_lane>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -1025,6 +1028,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1417,6 +1426,12 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1739,11 +1754,11 @@
 		};
 
 		rng: rng@10c3000 {
-			compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee";
+			compatible = "qcom,sm8450-trng", "qcom,trng";
 			reg = <0 0x010c3000 0 0x1000>;
 		};
 
-		pcie0: pci@1c00000 {
+		pcie0: pcie@1c00000 {
 			compatible = "qcom,pcie-sm8450-pcie0";
 			reg = <0 0x01c00000 0 0x3000>,
 			      <0 0x60000000 0 0xf1d>,
@@ -1762,12 +1777,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5981 0x1>,
-				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map = <0x0 &gic_its 0x5980 0x1>,
+				  <0x100 &gic_its 0x5981 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1780,7 +1791,7 @@
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
-				 <&pcie0_lane>,
+				 <&pcie0_phy>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1811,7 +1822,7 @@
 
 			power-domains = <&gcc PCIE_0_GDSC>;
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1825,15 +1836,23 @@
 
 		pcie0_phy: phy@1c06000 {
 			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
-			reg = <0 0x01c06000 0 0x200>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c06000 0 0x2000>;
+
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_EN>,
-				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1842,22 +1861,9 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x01c06e00 0 0x200>, /* tx */
-				      <0 0x01c07000 0 0x200>, /* rx */
-				      <0 0x01c06200 0 0x200>, /* pcs */
-				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-			};
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sm8450-pcie1";
 			reg = <0 0x01c08000 0 0x3000>,
 			      <0 0x40000000 0 0xf1d>,
@@ -1876,12 +1882,8 @@
 			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			/*
-			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
-			 * Hence, the IDs are swapped.
-			 */
-			msi-map = <0x0 &gic_its 0x5a01 0x1>,
-				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map = <0x0 &gic_its 0x5a00 0x1>,
+				  <0x100 &gic_its 0x5a01 0x1>;
 			msi-map-mask = <0xff00>;
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -1894,7 +1896,7 @@
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_lane>,
+				 <&pcie1_phy>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -1923,7 +1925,7 @@
 
 			power-domains = <&gcc PCIE_1_GDSC>;
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
@@ -1935,17 +1937,25 @@
 			status = "disabled";
 		};
 
-		pcie1_phy: phy@1c0f000 {
+		pcie1_phy: phy@1c0e000 {
 			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
-			reg = <0 0x01c0f000 0 0x200>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01c0e000 0 0x2000>;
+
 			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_EN>,
-				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			clock-output-names = "pcie_1_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -1954,21 +1964,6 @@
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e000 {
-				reg = <0 0x01c0e000 0 0x200>, /* tx */
-				      <0 0x01c0e200 0 0x300>, /* rx */
-				      <0 0x01c0f200 0 0x200>, /* pcs */
-				      <0 0x01c0e800 0 0x200>, /* tx */
-				      <0 0x01c0ea00 0 0x300>, /* rx */
-				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-			};
 		};
 
 		config_noc: interconnect@1500000 {
@@ -2030,6 +2025,206 @@
 			reg = <0x0 0x1fc0000 0x0 0x30000>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-730.1", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-818000000 {
+					opp-hz = /bits/ 64 <818000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-791000000 {
+					opp-hz = /bits/ 64 <791000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-734000000 {
+					opp-hz = /bits/ 64 <734000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-545000000 {
+					opp-hz = /bits/ 64 <545000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-492000000 {
+					opp-hz = /bits/ 64 <492000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-421000000 {
+					opp-hz = /bits/ 64 <421000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-317000000 {
+					opp-hz = /bits/ 64 <317000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-285000000 {
+					opp-hz = /bits/ 64 <285000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8450-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "gmu",
+				      "hub",
+				      "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
 		usb_1_hsphy: phy@88e3000 {
 			compatible = "qcom,sm8450-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -2165,18 +2360,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr4: soundwire-controller@31f0000 {
+		swr4: soundwire@31f0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x031f0000 0 0x2000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2184,6 +2374,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2213,18 +2406,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@3210000 {
+		swr1: soundwire@3210000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03210000 0 0x2000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2234,6 +2421,9 @@
 			qcom,din-ports = <0>;
 			qcom,dout-ports = <5>;
 
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
 			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
 			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
@@ -2259,14 +2449,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2280,18 +2465,12 @@
 				 <&vamacro>;
 			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>, <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@3250000 {
+		swr0: soundwire@3250000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x03250000 0 0x2000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2299,6 +2478,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <2>;
 			qcom,dout-ports = <6>;
 
@@ -2318,7 +2500,7 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@33b0000 {
+		swr2: soundwire@33b0000 {
 			compatible = "qcom,soundwire-v1.7.0";
 			reg = <0 0x033b0000 0 0x2000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
@@ -2329,6 +2511,9 @@
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2355,8 +2540,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec", "npl";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
@@ -4138,7 +4321,7 @@
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4187,10 +4370,8 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4198,17 +4379,11 @@
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ice: crypto@1d88000 {
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index f29cce518..a26e169a8 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -10,10 +10,12 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
-#include "pmr735d.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8550 MTP";
@@ -58,6 +60,7 @@
 		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -508,6 +511,134 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_s6g_1p8>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p8>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
 };
 
 &i2c_master_hub_0 {
@@ -743,7 +874,7 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
@@ -797,8 +928,7 @@
 	vcc-max-microamp = <1300000>;
 	vccq-supply = <&vreg_l1g_1p2>;
 	vccq-max-microamp = <1200000>;
-	vccq2-supply = <&vreg_l3g_1p2>;
-	vccq2-max-microamp = <100>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 2c09ce8ae..54dfee40d 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -11,10 +11,12 @@
 #include "pm8010.dtsi"
 #include "pm8550.dtsi"
 #include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
 #include "pm8550ve.dtsi"
 #include "pm8550vs.dtsi"
 #include "pmk8550.dtsi"
-#include "pmr735d.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8550 QRD";
@@ -23,6 +25,7 @@
 
 	aliases {
 		serial0 = &uart7;
+		serial1 = &uart14;
 	};
 
 	wcd938x: audio-codec {
@@ -75,6 +78,7 @@
 		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
 
 		connector@0 {
 			compatible = "usb-c-connector";
@@ -524,6 +528,126 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
+
+	regulators-6 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "m";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_s6g_1p86>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1m_1p056: ldo1 {
+			regulator-name = "vreg_l1m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2m_1p056: ldo2 {
+			regulator-name = "vreg_l2m_1p056";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3m_2p8: ldo3 {
+			regulator-name = "vreg_l3m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4m_2p8: ldo4 {
+			regulator-name = "vreg_l4m_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5m_1p8: ldo5 {
+			regulator-name = "vreg_l5m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6m_1p8: ldo6 {
+			regulator-name = "vreg_l6m_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7m_2p9: ldo7 {
+			regulator-name = "vreg_l7m_2p9";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8010-rpmh-regulators";
+		qcom,pmic-id = "n";
+
+		vdd-l1-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-l4-supply = <&vreg_bob2>;
+		vdd-l5-supply = <&vreg_s6g_1p86>;
+		vdd-l6-supply = <&vreg_bob1>;
+		vdd-l7-supply = <&vreg_bob1>;
+
+		vreg_l1n_1p1: ldo1 {
+			regulator-name = "vreg_l1n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2n_1p1: ldo2 {
+			regulator-name = "vreg_l2n_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3n_2p8: ldo3 {
+			regulator-name = "vreg_l3n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4n_2p8: ldo4 {
+			regulator-name = "vreg_l4n_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5n_1p8: ldo5 {
+			regulator-name = "vreg_l5n_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6n_3p3: ldo6 {
+			regulator-name = "vreg_l6n_3p3";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7n_2p96: ldo7 {
+			regulator-name = "vreg_l7n_2p96";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
 };
 
 &i2c_master_hub_0 {
@@ -582,6 +706,13 @@
 	};
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8550/ipa_fws.mbn";
+	status = "okay";
+};
+
 &gcc {
 	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
 		 <&pcie0_phy>,
@@ -593,6 +724,14 @@
 		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 };
 
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
@@ -765,6 +904,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/sm8550/adsp.mbn",
 			"qcom/sm8550/adsp_dtb.mbn";
@@ -835,13 +978,28 @@
 	wcd_tx: codec@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
-		qcom,tx-port-mapping = <1 1 2 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
 	};
 };
 
 &tlmm {
 	gpio-reserved-ranges = <32 8>;
 
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
 	sde_dsi_active: sde-dsi-active-state {
 		pins = "gpio133";
 		function = "gpio";
@@ -883,14 +1041,36 @@
 	status = "okay";
 };
 
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s4e_0p95>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa0p8-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p9-supply = <&vreg_s6g_1p86>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l17b_2p5>;
 	vcc-max-microamp = <1300000>;
 	vccq-supply = <&vreg_l1g_1p2>;
 	vccq-max-microamp = <1200000>;
-	vccq2-supply = <&vreg_l3g_1p2>;
-	vccq2-max-microamp = <100>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 3a228d4f0..90acdf16b 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -5,11 +5,13 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8550-camcc.h>
 #include <dt-bindings/clock/qcom,sm8550-gcc.h>
 #include <dt-bindings/clock/qcom,sm8550-gpucc.h>
 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
@@ -332,6 +334,7 @@
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-sm8550", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x19000>;
 			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
 		};
 	};
@@ -580,7 +583,7 @@
 			no-map;
 
 			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 		};
 
 		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
@@ -1064,6 +1067,20 @@
 				status = "disabled";
 			};
 
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c15: i2c@89c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0089c000 0 0x4000>;
@@ -1671,7 +1688,12 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
-		pcie0: pci@1c00000 {
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8550-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0 0x01c00000 0 0x3000>,
@@ -1762,7 +1784,7 @@
 			status = "disabled";
 		};
 
-		pcie1: pci@1c08000 {
+		pcie1: pcie@1c08000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8550";
 			reg = <0x0 0x01c08000 0x0 0x3000>,
@@ -1973,6 +1995,128 @@
 			#reset-cells = <1>;
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-43050a01", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x0>,
+				 <&adreno_smmu 1 0x0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_micro_code_mem>;
+			};
+
+			/* Speedbin needs more work on A740+, keep only lower freqs */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-680000000 {
+					opp-hz = /bits/ 64 <680000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-615000000 {
+					opp-hz = /bits/ 64 <615000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-475000000 {
+					opp-hz = /bits/ 64 <475000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+				};
+
+				opp-401000000 {
+					opp-hz = /bits/ 64 <401000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-348000000 {
+					opp-hz = /bits/ 64 <348000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+				};
+
+				opp-295000000 {
+					opp-hz = /bits/ 64 <295000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x35000>,
+			      <0x0 0x03d50000 0x0 0x10000>,
+			      <0x0 0x0b280000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_DEMET_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "hub",
+				      "demet";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x0>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,sm8550-gpucc";
 			reg = <0 0x03d90000 0 0xa000>;
@@ -1984,6 +2128,89 @@
 			#power-domain-cells = <1>;
 		};
 
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>;
+			clock-names = "hlos",
+				      "bus",
+				      "iface",
+				      "ahb";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x4040>;
@@ -2034,17 +2261,13 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "wsa2-mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa2_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr3: soundwire-controller@6ab0000 {
+		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
@@ -2052,6 +2275,9 @@
 			clock-names = "iface";
 			label = "WSA2";
 
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2080,17 +2306,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&rx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr1: soundwire-controller@6ad0000 {
+		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
@@ -2098,18 +2319,21 @@
 			clock-names = "iface";
 			label = "RX";
 
-			qcom,din-ports = <0>;
-			qcom,dout-ports = <10>;
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
 
-			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
-			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
-			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,din-ports = <1>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>;
 
 			#address-cells = <2>;
 			#size-cells = <0>;
@@ -2125,14 +2349,9 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-
-			assigned-clock-rates = <19200000>;
 
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
@@ -2145,17 +2364,12 @@
 				 <&lpass_vamacro>;
 			clock-names = "mclk", "macro", "dcodec", "fsgen";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "mclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&wsa_swr_active>;
 			#sound-dai-cells = <1>;
 		};
 
-		swr0: soundwire-controller@6b10000 {
+		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
 			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
@@ -2163,6 +2377,9 @@
 			clock-names = "iface";
 			label = "WSA";
 
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <9>;
 
@@ -2182,7 +2399,7 @@
 			status = "disabled";
 		};
 
-		swr2: soundwire-controller@6d30000 {
+		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
 			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
@@ -2192,6 +2409,9 @@
 			clock-names = "iface";
 			label = "TX";
 
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
 			qcom,din-ports = <4>;
 			qcom,dout-ports = <0>;
 			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
@@ -2218,9 +2438,6 @@
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "mclk", "macro", "dcodec";
 
-			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-			assigned-clock-rates = <19200000>;
-
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
@@ -2430,6 +2647,20 @@
 			#power-domain-cells = <1>;
 		};
 
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8550-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd SM8550_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8550-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3017,7 +3248,7 @@
 		spmi_bus: spmi@c400000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0 0x0c400000 0 0x3000>,
-			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c500000 0 0x400000>,
 			      <0 0x0c440000 0 0x80000>,
 			      <0 0x0c4c0000 0 0x20000>,
 			      <0 0x0c42d000 0 0x4000>;
@@ -3508,6 +3739,22 @@
 				bias-disable;
 			};
 
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio78", "gpio79";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			sdc2_sleep: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
new file mode 100644
index 000000000..be133a3d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 MTP";
+	compatible = "qcom,sm8650-mtp", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3e_0p9>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+	vdda-qref-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		output-disable;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker Left */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+
+	/* WSA8845, Speaker Right */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+		powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3c_1p2>;
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
+ * USB SS -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
new file mode 100644
index 000000000..b9151c2dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8650.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 8
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d_a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8650 QRD";
+	compatible = "qcom,sm8650-qrd", "qcom,sm8650";
+
+	aliases {
+		serial0 = &uart15;
+		serial1 = &uart14;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8650-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s1c_1p2>;
+		vdd-l12-supply = <&vreg_s6c_1p8>;
+		vdd-l15-supply = <&vreg_s6c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		qcom,pmic-id = "b";
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s1c_1p2>;
+		vdd-l2-supply = <&vreg_s1c_1p2>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "c";
+
+		vreg_s1c_1p2: smps1 {
+			regulator-name = "vreg_s1c_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1348000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1036000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3c_0p9: smps3 {
+			regulator-name = "vreg_s3c_0p9";
+			regulator-min-microvolt = <976000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4c_1p2: smps4 {
+			regulator-name = "vreg_s4c_1p2";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1280000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5c_0p7: smps5 {
+			regulator-name = "vreg_s5c_0p7";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6c_1p8: smps6 {
+			regulator-name = "vreg_s6c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-name = "vreg_l3c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "d";
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "e";
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-name = "vreg_l3e_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s3c_0p9>;
+
+		qcom,pmic-id = "g";
+
+		vreg_l1g_0p91: ldo1 {
+			regulator-name = "vreg_l1g_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_0p91: ldo3 {
+			regulator-name = "vreg_l3g_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+
+		vdd-l1-supply = <&vreg_s3c_0p9>;
+		vdd-l2-supply = <&vreg_s3c_0p9>;
+		vdd-l3-supply = <&vreg_s1c_1p2>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		qcom,pmic-id = "i";
+
+		vreg_s4i_0p85: smps4 {
+			regulator-name = "vreg_s4i_0p85";
+			regulator-min-microvolt = <852000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_0p88: ldo1 {
+			regulator-name = "vreg_l1i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_0p88: ldo2 {
+			regulator-name = "vreg_l2i_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_1p2: ldo3 {
+			regulator-name = "vreg_l3i_0p91";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sm8650/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
+		pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1i_0p88>;
+
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1i_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		power-source = <1>;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_rtc {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8650/adsp.mbn",
+			"qcom/sm8650/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8650/cdsp.mbn",
+			"qcom/sm8650/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8650/modem.mbn",
+			"qcom/sm8650/modem_dtb.mbn";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&spi4 {
+	status = "okay";
+
+	touchscreen@0 {
+		compatible = "goodix,gt9916";
+		reg = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <162 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l14b_3p2>;
+
+		spi-max-frequency = <1000000>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2400>;
+
+		pinctrl-0 = <&ts_irq>, <&ts_reset>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	/* Reserved I/Os for NFC */
+	gpio-reserved-ranges = <32 8>, <74 1>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	disp0_reset_n_active: disp0-reset-n-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp0_reset_n_suspend: disp0-reset-n-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_active: mdp-vsync-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdp_vsync_suspend: mdp-vsync-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_irq: ts-irq-state {
+		pins = "gpio161";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+		output-disable;
+	};
+
+	ts_reset: ts-reset-state {
+		pins = "gpio162";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		vddio-supply = <&vreg_l3c_1p2>;
+		vddaon-supply = <&vreg_l15b_1p8>;
+		vdddig-supply = <&vreg_s3c_0p9>;
+		vddrfa0p8-supply = <&vreg_s3c_0p9>;
+		vddrfa1p2-supply = <&vreg_s1c_1p2>;
+		vddrfa1p9-supply = <&vreg_s6c_1p8>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart15 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1c_1p2>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3i_1p2>;
+
+	status = "okay";
+};
+
+/*
+ * DPAUX -> WCD9395 -> USB_SBU -> USB-C
+ * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C
+ * USB SS -> NB7VPQ904MMUTWG -> USB-C
+ */
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1i_0p88>;
+	vdda12-supply = <&vreg_l3i_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3i_1p2>;
+	vdda-pll-supply = <&vreg_l3g_0p91>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
new file mode 100644
index 000000000..0e4bd83b2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -0,0 +1,6015 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8650-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gcc.h>
+#include <dt-bindings/clock/qcom,sm8650-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8650-tcsr.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sm8650-gpucc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a520";
+			reg = <0 0x100>;
+
+			clocks = <&cpufreq_hw 0>;
+
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+
+			qcom,freq-domain = <&cpufreq_hw 0>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x200>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x300>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x400>;
+
+			clocks = <&cpufreq_hw 3>;
+
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 3>;
+
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x500>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a720";
+			reg = <0 0x600>;
+
+			clocks = <&cpufreq_hw 1>;
+
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <238>;
+
+			qcom,freq-domain = <&cpufreq_hw 1>;
+
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x4";
+			reg = <0 0x700>;
+
+			clocks = <&cpufreq_hw 2>;
+
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+
+			qcom,freq-domain = <&cpufreq_hw 2>;
+
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			SILVER_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			GOLD_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-plus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8650", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8650-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8650-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&SILVER_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>,
+					     <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0 0x80000000 0 0xe00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm@80e00000 {
+			reg = <0 0x80e00000 0 0x400000>;
+			no-map;
+		};
+
+		/* Merged xbl_dtlog, xbl_ramdump and aop_image regions */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */
+		aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* Secdata region can be reused by apps */
+
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		pvmfw_mem: pvmfw@824a0000 {
+			reg = <0 0x824a0000 0 0x100000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@82800000 {
+			reg = <0 0x82800000 0 0x2000000>;
+			no-map;
+		};
+
+		mpss_dsm_mem: mpss-dsm@86b00000 {
+			reg = <0 0x86b00000 0 0x4900000>;
+			no-map;
+		};
+
+		mpss_dsm_mem_2: mpss-dsm-2@8b400000 {
+			reg = <0 0x8b400000 0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8bc00000 {
+			reg = <0 0x8bc00000 0 0xf400000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss@9b0a0000 {
+			reg = <0 0x9b0a0000 0 0x1e0000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video@9bb00000 {
+			reg = <0 0x9bb00000 0 0x800000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@9c300000 {
+			reg = <0 0x9c300000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@9ca00000 {
+			reg = <0 0x9ca00000 0 0x1400000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 {
+			reg = <0 0x9de00000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 {
+			reg = <0 0x9de80000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@9df00000 {
+			reg = <0 0x9df00000 0 0x4080000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@d7c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xd7c00000 0 0x400000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
+		};
+
+		/* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */
+		tz_merged_mem: tz-merged@d8000000 {
+			reg = <0 0xd8000000 0 0x800000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm@f3800000 {
+			reg = <0 0xf3800000 0 0x4400000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm@f7c00000 {
+			reg = <0 0xf7c00000 0 0x4c00000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <443>, <429>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <94>, <432>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,smem = <435>, <428>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8650-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipcc: mailbox@406000 {
+			compatible = "qcom,sm8650-ipcc", "qcom,ipcc";
+			reg = <0 0x00406000 0 0x1000>;
+
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart14: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			uart15: serial@89c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart15_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0 0x009c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			clock-names = "s-ahb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00980000 0 0x4000>;
+
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00984000 0 0x4000>;
+
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00988000 0 0x4000>;
+
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0098c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00990000 0 0x4000>;
+
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				clock-names = "se",
+					      "core";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xc>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+					 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "qup-core";
+
+			iommus = <&apps_smmu 0xa3 0>;
+
+			dma-coherent;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt  SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8650-cnoc-main";
+			reg = <0 0x01500000 0 0x14080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8650-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8650-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8650-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8650-aggre1-noc";
+			reg = <0 0x016e0000 0 0x16400>;
+
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8650-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8650-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+				 <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			iommu-map = <0     &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			#interrupt-cells = <1>;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+			bus-range = <0 0xff>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			dma-coherent;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+				 <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8650-qmp-ufs-phy";
+			reg = <0 0x01d80000 0 0x2000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&tcsr TCSR_UFS_CLKREF_EN>;
+			clock-names = "ref",
+				      "ref_aux",
+				      "qref";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<100000000 403000000>,
+					<100000000 403000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ufs-ddr",
+					     "cpu-ufs";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0>;
+
+			lanes-per-direction = <2>;
+			qcom,ice = <&ice>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8650-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8650-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0xa0000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8650-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa";
+
+			iommus = <&apps_smmu 0x4a0 0x0>,
+				 <&apps_smmu 0x4a2 0x0>;
+			reg = <0 0x3f40000 0 0x10000>,
+			      <0 0x3f50000 0 0x5000>,
+			      <0 0x3e04000 0 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8650-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx",
+					     "mss";
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+					<&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <1>;
+
+				label = "mpss";
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			pinctrl-0 = <&wsa2_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			pinctrl-0 = <&rx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <11>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			pinctrl-0 = <&wsa_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			pinctrl-0 = <&tx_swr_active>;
+			pinctrl-names = "default";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk",
+				      "macro",
+				      "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8650-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8650-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8650-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8650-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+
+			#interconnect-cells = <2>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			iommus = <&apps_smmu 0x540 0>;
+
+			bus-width = <4>;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8650-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
+					<&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8650-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp",
+					    "vbif";
+
+				interrupts-extended = <&mdss 0>;
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupts-extended = <&mdss 5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8650-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@af54000 {
+				compatible = "qcom,sm8650-dp";
+				reg = <0 0xaf54000 0 0x104>,
+				      <0 0xaf54200 0 0xc0>,
+				      <0 0xaf55000 0 0x770>,
+				      <0 0xaf56000 0 0x9c>,
+				      <0 0xaf57000 0 0x9c>;
+
+				interrupts-extended = <&mdss 12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				operating-points-v2 = <&dp_opp_table>;
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8650-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				iommus = <&apps_smmu 0x40 0>;
+
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy",
+					    "usb3-phy";
+
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,usb3_lpm_capable;
+				snps,usb2-lpm-disable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+
+				dma-coherent;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8650-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			interrupt-parent = <&intc>;
+
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>, <143 244 4>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c228000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c228000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <15>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c229000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c229000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <16>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c22a000 {
+			compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c22a000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow",
+					  "critical";
+
+			#qcom,sensors = <13>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x400000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+
+			interrupt-controller;
+			#interrupt-cells = <4>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8650-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 211>;
+
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio66", "gpio67";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio70", "gpio71";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio74", "gpio75";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio78", "gpio79";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio63";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio3";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio7";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio11";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio15";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio19";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio23";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio27";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio24", "gpio25";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				/* TX, RX */
+				pins = "gpio30", "gpio31";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			dma-coherent;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0",
+				    "drv-1",
+				    "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8650-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8650-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>,
+			      <0 0x17d94000 0 0x1000>;
+			reg-names = "freq-domain0",
+				    "freq-domain1",
+				    "freq-domain2",
+				    "freq-domain3";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2",
+					  "dcvsh-irq-3";
+
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b7400 {
+			compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b7400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8650-gem-noc";
+			reg = <0 0x24100000 0 0xc5080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8650-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8650-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx",
+					     "lmx";
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <2>;
+
+				label = "lpass";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "adsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1043 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1044 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1045 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1046 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1007 0x40>,
+							 <&apps_smmu 0x1067 0x0>,
+							 <&apps_smmu 0x1087 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8650-nsp-noc";
+			reg = <0 0x320c0000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8650-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx",
+					     "mxc",
+					     "nsp";
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				qcom,remote-pid = <5>;
+
+				label = "cdsp";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+					label = "cdsp";
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x0>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x0>;
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphvx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphvx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nsphmx3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nsphmx3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss4-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss5-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss6-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				gpuss7-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem0-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem1-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem2-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				modem3-critical {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
new file mode 100644
index 000000000..7532d8eca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 CRD";
+	compatible = "qcom,x1e80100-crd", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
new file mode 100644
index 000000000..3112487d2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. X1E80100 QCP";
+	compatible = "qcom,x1e80100-qcp", "qcom,x1e80100";
+
+	aliases {
+		serial0 = &uart21;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <33 3>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <238 1>; /* UFS Reset */
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
new file mode 100644
index 000000000..5ba7924aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -0,0 +1,3526 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD8>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD9>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU10: cpu@20200 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD10>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		CPU11: cpu@20300 {
+			device_type = "cpu";
+			compatible = "qcom,oryon";
+			reg = <0x0 0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_2>;
+			power-domains = <&CPU_PD11>;
+			power-domain-names = "psci";
+			cpu-idle-states = <&CLUSTER_C4>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+
+				core1 {
+					cpu = <&CPU9>;
+				};
+
+				core2 {
+					cpu = <&CPU10>;
+				};
+
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CLUSTER_C4: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "ret";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <180>;
+				exit-latency-us = <320>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_CL4: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "l2-ret";
+				arm,psci-suspend-param = <0x01000044>;
+				entry-latency-us = <350>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+
+			CLUSTER_CL5: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				idle-state-name = "ret-pll-off";
+				arm,psci-suspend-param = <0x01000054>;
+				entry-latency-us = <2200>;
+				exit-latency-us = <2500>;
+				min-residency-us = <7000>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-x1e80100", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,x1e80100-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,x1e80100-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD1>;
+		};
+
+		CPU_PD8: power-domain-cpu8 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD9: power-domain-cpu9 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD10: power-domain-cpu10 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CPU_PD11: power-domain-cpu11 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD2>;
+		};
+
+		CLUSTER_PD0: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD1: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+
+		CLUSTER_PD2: power-domain-cpu-cluster2 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		ncc_mem: ncc@80a00000 {
+			reg = <0x0 0x80a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		cpucp_log_mem: cpucp-log@80e00000 {
+			reg = <0x0 0x80e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		cpucp_mem: cpucp@80e40000 {
+			reg = <0x0 0x80e40000 0x0 0x540000>;
+			no-map;
+		};
+
+		reserved-region@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		tags_mem: tags-region@81400000 {
+			reg = <0x0 0x81400000 0x0 0x1a0000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@81a00000 {
+			reg = <0x0 0x81a00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@81a40000 {
+			reg = <0x0 0x81a40000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@81c00000 {
+			reg = <0x0 0x81c00000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x81c60000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@81c80000 {
+			reg = <0x0 0x81c80000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@81ca0000 {
+			reg = <0x0 0x81ca0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@81ce0000 {
+			reg = <0x0 0x81ce0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@81ce4000 {
+			reg = <0x0 0x81ce4000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@81cff000 {
+			reg = <0x0 0x81cff000 0x0 0x1000>;
+			no-map;
+		};
+
+		pdp_ns_shared_mem: pdp-ns-shared@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		gpu_prr_mem: gpu-prr@81f00000 {
+			reg = <0x0 0x81f00000 0x0 0x10000>;
+			no-map;
+		};
+
+		tpm_control_mem: tpm-control@81f10000 {
+			reg = <0x0 0x81f10000 0x0 0x10000>;
+			no-map;
+		};
+
+		usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 {
+			reg = <0x0 0x81f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		pld_pep_mem: pld-pep@81f30000 {
+			reg = <0x0 0x81f30000 0x0 0x6000>;
+			no-map;
+		};
+
+		pld_gmu_mem: pld-gmu@81f36000 {
+			reg = <0x0 0x81f36000 0x0 0x1000>;
+			no-map;
+		};
+
+		pld_pdp_mem: pld-pdp@81f37000 {
+			reg = <0x0 0x81f37000 0x0 0x1000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@82700000 {
+			reg = <0x0 0x82700000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 {
+			reg = <0x0 0x82800000 0x0 0xc00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 {
+			reg = <0x0 0x84b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 {
+			reg = <0x0 0x85300000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 {
+			reg = <0x0 0x866c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@86700000 {
+			reg = <0x0 0x86700000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_boot_mem: adsp-boot@86b00000 {
+			reg = <0x0 0x86b00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: video@87700000 {
+			reg = <0x0 0x87700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x3a00000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x80000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 {
+			reg = <0x0 0x8d900000 0x0 0x80000>;
+			no-map;
+		};
+
+		gpu_microcode_mem: gpu-microcode@8d9fe000 {
+			reg = <0x0 0x8d9fe000 0x0 0x2000>;
+			no-map;
+		};
+
+		cvp_mem: cvp@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: camera@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x800000>;
+			no-map;
+		};
+
+		av1_encoder_mem: av1-encoder@8e900000 {
+			reg = <0x0 0x8e900000 0x0 0x700000>;
+			no-map;
+		};
+
+		reserved-region@8f000000 {
+			reg = <0x0 0x8f000000 0x0 0xa00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@8fa00000 {
+			reg = <0x0 0x8fa00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		q6_wpss_dtb_mem: q6-wpss-dtb@91300000 {
+			reg = <0x0 0x91300000 0x0 0x80000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@d8000000 {
+			reg = <0x0 0xd8000000 0x0 0x40000>;
+			no-map;
+		};
+
+		reserved-region@d8040000 {
+			reg = <0x0 0xd8040000 0x0 0xa0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d80e0000 {
+			reg = <0x0 0xd80e0000 0x0 0x520000>;
+			no-map;
+		};
+
+		ta_mem: ta@d8600000 {
+			reg = <0x0 0xd8600000 0x0 0x8a00000>;
+			no-map;
+		};
+
+		tags_mem1: tags@e1000000 {
+			reg = <0x0 0xe1000000 0x0 0x26a0000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc-lpi@ff800000 {
+			reg = <0x0 0xff800000 0x0 0x600000>;
+			no-map;
+		};
+
+		smem_mem: smem@ffe00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,x1e80100-gcc";
+			reg = <0 0x00100000 0 0x200000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x436 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x423 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+
+				interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+
+				interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+
+				interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			uart21: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+
+				interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+
+				interconnects =	<&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
+
+				pinctrl-0 = <&qup_uart21_default>;
+				pinctrl-names = "default";
+
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c22_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c23_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x136 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x123 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@b00000  {
+			compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00b00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x456 0x0>;
+
+			status = "disabled";
+		};
+
+		qupv3_0: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00bc0000 0 0x2000>;
+
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+
+			iommus = <&apps_smmu 0x443 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi0: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b80000 0 0x4000>;
+
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c1: i2c@b84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi1: spi@b84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b84000 0 0x4000>;
+
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c2: i2c@b88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi2: spi@b88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0xb88000 0 0x4000>;
+
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c3: i2c@b8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi3: spi@b8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b8c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c4: i2c@b90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0xb90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi4: spi@b90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b90000 0 0x4000>;
+
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c5: i2c@b94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi5: spi@b94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b94000 0 0x4000>;
+
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c6: i2c@b98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi6: spi@b98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b98000 0 0x4000>;
+
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			i2c7: i2c@b9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+
+			spi7: spi@b9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00b9c000 0 0x4000>;
+
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				pinctrl-names = "default";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,x1e80100-cnoc-main";
+			reg = <0 0x1500000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,x1e80100-cnoc-cfg";
+			reg = <0 0x1600000 0 0x6600>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,x1e80100-system-noc";
+			reg = <0 0x1680000 0 0x1c080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_south_anoc: interconnect@16c0000 {
+			compatible = "qcom,x1e80100-pcie-south-anoc";
+			reg = <0 0x16c0000 0 0xd080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_center_anoc: interconnect@16d0000 {
+			compatible = "qcom,x1e80100-pcie-center-anoc";
+			reg = <0 0x16d0000 0 0x7000>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,x1e80100-aggre1-noc";
+			reg = <0 0x16E0000 0 0x14400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,x1e80100-aggre2-noc";
+			reg = <0 0x1700000 0 0x1c400>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pcie_north_anoc: interconnect@1740000 {
+			compatible = "qcom,x1e80100-pcie-north-anoc";
+			reg = <0 0x1740000 0 0x9080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_center_anoc: interconnect@1750000 {
+			compatible = "qcom,x1e80100-usb-center-anoc";
+			reg = <0 0x1750000 0 0x8800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_north_anoc: interconnect@1760000 {
+			compatible = "qcom,x1e80100-usb-north-anoc";
+			reg = <0 0x1760000 0 0x7080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		usb_south_anoc: interconnect@1770000 {
+			compatible = "qcom,x1e80100-usb-south-anoc";
+			reg = <0 0x1770000 0 0xf080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,x1e80100-mmss-noc";
+			reg = <0 0x1780000 0 0x5B800>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gem_noc: interconnect@26400000 {
+			compatible = "qcom,x1e80100-gem-noc";
+			reg = <0 0x26400000 0 0x311200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,x1e80100-nsp-noc";
+			reg = <0 0x320C0000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,x1e80100-lpass-ag-noc";
+			reg = <0 0x7e40000 0 0xE080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,x1e80100-lpass-lpiaon-noc";
+			reg = <0 0x7400000 0 0x19080>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,x1e80100-lpass-lpicx-noc";
+			reg = <0 0x7430000 0 0x3A200>;
+
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			#interconnect-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,x1e80100-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+
+			qcom,pdc-ranges = <0 480 42>, <42 251 5>,
+					  <47 522 52>, <99 609 32>,
+					  <131 717 12>, <143 816 19>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,x1e80100-tlmm";
+			reg = <0 0x0f100000 0 0xf00000>;
+
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&tlmm 0 0 239>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio0", "gpio1";
+				function = "qup0_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "qup0_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "qup0_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio12", "gpio13";
+				function = "qup0_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "qup0_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "qup0_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio24", "gpio25";
+				function = "qup0_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio14", "gpio15";
+				function = "qup0_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio56", "gpio57";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio54", "gpio55";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio73";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c22_data_clk: qup-i2c22-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio88", "gpio89";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c23_data_clk: qup-i2c23-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup0_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup0_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup0_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup0_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup0_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup0_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio13";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio14", "gpio15", "gpio12";
+				function = "qup0_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio53";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio54", "gpio55", "gpio52";
+				function = "qup1_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio67";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio71";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio75";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio79";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio83";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio87";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio84", "gpio85", "gpio86";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_cs: qup-spi22-cs-state {
+				pins = "gpio91";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi22_data_clk: qup-spi22-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio88", "gpio89", "gpio90";
+				function = "qup2_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_cs: qup-spi23-cs-state {
+				pins = "gpio85";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi23_data_clk: qup-spi23-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio86", "gpio87", "gpio84";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart21_default: qup-uart21-default-state {
+				/* TX, RX */
+				pins = "gpio86", "gpio87";
+				function = "qup2_se5";
+				drive-strength= <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+		};
+
+		intc: interrupt-controller@17000000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17000000 0 0x10000>,     /* GICD */
+			      <0 0x17080000 0 0x480000>;    /* GICR * 12 */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <3>;
+			interrupt-controller;
+
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17040000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17040000 0 0x40000>;
+
+				msi-controller;
+				#msi-cells = <1>;
+
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17500000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17500000 0 0x10000>,
+			      <0 0x17510000 0 0x10000>,
+			      <0 0x17520000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,x1e80100-rpmh-clk";
+
+				clocks = <&xo_board>;
+				clock-names = "xo";
+
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,x1e80100-rpmhpd";
+
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				#power-domain-cells = <1>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		timer@17800000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17800000 0 0x1000>;
+
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0 0x20000000>;
+
+			frame@17801000 {
+				reg = <0 0x17801000 0x1000>,
+				      <0 0x17802000 0x1000>;
+
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <0>;
+			};
+
+			frame@17803000 {
+				reg = <0 0x17803000 0x1000>;
+
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <1>;
+
+				status = "disabled";
+			};
+
+			frame@17805000 {
+				reg = <0 0x17805000 0x1000>;
+
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <2>;
+
+				status = "disabled";
+			};
+
+			frame@17807000 {
+				reg = <0 0x17807000 0x1000>;
+
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <3>;
+
+				status = "disabled";
+			};
+
+			frame@17809000 {
+				reg = <0 0x17809000 0x1000>;
+
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <4>;
+
+				status = "disabled";
+			};
+
+			frame@1780b000 {
+				reg = <0 0x1780b000 0x1000>;
+
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <5>;
+
+				status = "disabled";
+			};
+
+			frame@1780d000 {
+				reg = <0 0x1780d000 0x1000>;
+
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+
+				frame-number = <6>;
+
+				status = "disabled";
+			};
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,x1e80100-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>,
+			      <0 0x25a00000 0 0x200000>,
+			      <0 0x25c00000 0 0x200000>,
+			      <0 0x25e00000 0 0x200000>,
+			      <0 0x26000000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc4_base",
+				    "llcc5_base",
+				    "llcc6_base",
+				    "llcc7_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 7114cbbd8..8ea68d582 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -29,21 +29,35 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
 dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
+r8a77951-salvator-x-panel-aa104xd12-dtbs := r8a77951-salvator-x.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
+r8a77951-salvator-xs-panel-aa104xd12-dtbs := r8a77951-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb
+r8a77960-salvator-x-panel-aa104xd12-dtbs := r8a77960-salvator-x.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb
+r8a77960-salvator-xs-panel-aa104xd12-dtbs := r8a77960-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
+r8a77961-salvator-xs-panel-aa104xd12-dtbs := r8a77961-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
+r8a77965-salvator-x-panel-aa104xd12-dtbs := r8a77965-salvator-x.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb
+r8a77965-salvator-xs-panel-aa104xd12-dtbs := r8a77965-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb
 
@@ -55,36 +69,60 @@ dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb
 dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb
 
 dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
+r8a77990-ebisu-panel-aa104xd12-dtbs := r8a77990-ebisu.dtb draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu-panel-aa104xd12.dtb
 
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
+r8a77995-draak-panel-aa104xd12-dtbs := r8a77995-draak.dtb draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak-panel-aa104xd12.dtb
 
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
+dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f4-s4sk.dtb
 
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
+r8a779g0-white-hawk-ard-audio-da7212-dtbs := r8a779g0-white-hawk.dtb r8a779g0-white-hawk-ard-audio-da7212.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+r8a779m1-salvator-xs-panel-aa104xd12-dtbs := r8a779m1-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+r8a779m3-salvator-xs-panel-aa104xd12-dtbs := r8a779m3-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs-panel-aa104xd12.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+r8a779m5-salvator-xs-panel-aa104xd12-dtbs := r8a779m5-salvator-xs.dtb salvator-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs-panel-aa104xd12.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
+r9a07g043u11-smarc-pmod-dtbs := r9a07g043u11-smarc.dtb r9a07g043-smarc-pmod.dtbo
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc-pmod.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
+r9a07g044c2-smarc-cru-csi-ov5645-dtbs := r9a07g044c2-smarc.dtb r9a07g044c2-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
+r9a07g044l2-smarc-cru-csi-ov5645-dtbs := r9a07g044l2-smarc.dtb r9a07g044l2-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo
+r9a07g054l2-smarc-cru-csi-ov5645-dtbs := r9a07g054l2-smarc.dtb r9a07g054l2-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtb
+
+dtb-$(CONFIG_ARCH_R9A08G045) += r9a08g045s33-smarc.dtb
 
 dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
 
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 2e9927b97..5a14f116f 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -651,7 +651,7 @@
 		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 		 <&versaclock6_bb 4>, <&audio_clk_b>,
 		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+		 <&cpg CPG_MOD 922>;
 
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index ef3bb835d..6f133f54d 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -356,12 +356,9 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, link it to
-				 * VIN4 here.
+				 * HDMI is the default selection, leave CVBS
+				 * not connected here.
 				 */
-				adv7180_out: endpoint {
-					remote-endpoint = <&vin4_in>;
-				};
 			};
 		};
 
@@ -374,6 +371,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
@@ -423,13 +426,11 @@
 				 * CVBS and HDMI inputs through SW[49-53]
 				 * switches.
 				 *
-				 * CVBS is the default selection, leave HDMI
-				 * not connected here.
+				 * HDMI is the default selection, link it to
+				 * VIN4 here.
 				 */
 				adv7612_out: endpoint {
-					pclk-sample = <0>;
-					hsync-active = <0>;
-					vsync-active = <0>;
+					remote-endpoint = <&vin4_in>;
 				};
 			};
 		};
@@ -580,8 +581,8 @@
 		function = "usb0";
 	};
 
-	vin4_pins_cvbs: vin4 {
-		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+	vin4_pins: vin4 {
+		groups = "vin4_data24", "vin4_sync", "vin4_clk";
 		function = "vin4";
 	};
 };
@@ -729,7 +730,7 @@
 };
 
 &vin4 {
-	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-0 = <&vin4_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -737,7 +738,10 @@
 	ports {
 		port {
 			vin4_in: endpoint {
-				remote-endpoint = <&adv7180_out>;
+				pclk-sample = <0>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				remote-endpoint = <&adv7612_out>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
index bbc29452d..cba2fde9d 100644
--- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Ebisu board
+ * Device Tree Source for the Ebisu/Ebisu-4D board
  *
  * Copyright (C) 2018 Renesas Electronics Corp.
  */
@@ -403,6 +403,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		dvdd-3v-supply = <&reg_3p3v>;
+		bgvdd-supply = <&reg_1p8v>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
index 7fc0339a3..66f3affe0 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -112,7 +112,7 @@
 		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 		 <&audio_clk_a>, <&cs2000>,
 		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+		 <&cpg CPG_MOD 922>;
 
 	rsnd_port: port {
 		rsnd_endpoint: endpoint {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 9065dc243..95b0a1f6d 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774a1-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
-
 / {
 	compatible = "renesas,r8a774a1";
 	#address-cells = <2>;
@@ -1713,7 +1711,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 75776decd..786660fcd 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774b1-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
-
 / {
 	compatible = "renesas,r8a774b1";
 	#address-cells = <2>;
@@ -1597,7 +1595,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index ad2e87b03..eed94ffed 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1350,7 +1350,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A774C0_CLK_ZA2>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 2acf4067a..175e5d296 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774e1-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
-
 / {
 	compatible = "renesas,r8a774e1";
 	#address-cells = <2>;
@@ -1809,7 +1807,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 6d15229d2..a4260d929 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -9,8 +9,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a7795-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
-
 #define SOC_HAS_HDMI1
 #define SOC_HAS_SATA
 #define SOC_HAS_USB2_CH2
@@ -2032,7 +2030,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 17062ec50..a631ead17 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -9,8 +9,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a7796-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
-
 / {
 	compatible = "renesas,r8a7796";
 	#address-cells = <2>;
@@ -1903,7 +1901,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index d3f47da1b..7254912a2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -9,8 +9,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a77961-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A77961_CLK_S0D4
-
 / {
 	compatible = "renesas,r8a77961";
 	#address-cells = <2>;
@@ -1783,7 +1781,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A77961_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index c75820038..e57b90270 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -12,8 +12,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/r8a77965-sysc.h>
 
-#define CPG_AUDIO_CLK_I		R8A77965_CLK_S0D4
-
 #define SOC_HAS_SATA
 
 / {
@@ -1766,7 +1764,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 405404c08..0608dce92 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -29,6 +29,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	d1p8: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	d3p3: regulator-fixed {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
@@ -166,6 +175,12 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 
+		avdd-supply = <&d1p8>;
+		dvdd-supply = <&d1p8>;
+		pvdd-supply = <&d1p8>;
+		dvdd-3v-supply = <&d3p3>;
+		bgvdd-supply = <&d1p8>;
+
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 9da0fd08f..d5ac34a96 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Ebisu board with R-Car E3
+ * Device Tree Source for the Ebisu/Ebisu-4D board with R-Car E3
  *
  * Copyright (C) 2018 Renesas Electronics Corp.
  */
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 4c545eff9..8c2b28342 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1501,7 +1501,7 @@
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
 				 <&audio_clk_c>,
-				 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
 				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e25024a7b..8cf6473c6 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1063,7 +1063,7 @@
 				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 				 <&audio_clk_a>, <&audio_clk_b>,
-				 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+				 <&cpg CPG_MOD 922>;
 			clock-names = "ssi-all",
 				      "ssi.4", "ssi.3",
 				      "src.6", "src.5",
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 4e67a0356..504ac8c93 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -658,7 +658,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
@@ -706,7 +706,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779a0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index 5cbde8e8f..477f3114d 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -53,6 +53,12 @@
 		reg = <0x4 0x80000000 0x0 0x80000000>;
 	};
 
+	rc21012_pci: clk-rc21012-pci {
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+		#clock-cells = <0>;
+	};
+
 	rc21012_ufs: clk-rc21012-ufs {
 		compatible = "fixed-clock";
 		clock-frequency = <38400000>;
@@ -106,6 +112,12 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		rc21012-gpio2-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-high;
+		};
 	};
 };
 
@@ -145,6 +157,18 @@
 	status = "okay";
 };
 
+&pcie0_clkref {
+	compatible = "gpio-gate-clock";
+	clocks = <&rc21012_pci>;
+	enable-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	/delete-property/ clock-frequency;
+};
+
+&pciec0 {
+	reset-gpio = <&gpio_exp_20 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index ecdd5a523..7fb4989cc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -262,6 +262,20 @@
 		clock-frequency = <0>;
 	};
 
+	pcie0_clkref: pcie0-clkref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pcie1_clkref: pcie1-clkref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
 	pmu_a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -726,6 +740,126 @@
 			status = "disabled";
 		};
 
+		pciec0: pcie@e65d0000 {
+			compatible = "renesas,r8a779f0-pcie",
+				     "renesas,rcar-gen4-pcie";
+			reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>,
+			      <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+			      <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+			      <0 0xfe000000 0 0x400000>;
+			reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "dma", "sft_ce", "app";
+			clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+			clock-names = "core", "ref";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 624>;
+			reset-names = "pwr";
+			max-link-speed = <4>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>;
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>;
+			snps,enable-cdm-check;
+			status = "disabled";
+		};
+
+		pciec1: pcie@e65d8000 {
+			compatible = "renesas,r8a779f0-pcie",
+				     "renesas,rcar-gen4-pcie";
+			reg = <0 0xe65d8000 0 0x1000>, <0 0xe65da000 0 0x0800>,
+			      <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>,
+			      <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>,
+			      <0 0xee900000 0 0x400000>;
+			reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config";
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "dma", "sft_ce", "app";
+			clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>;
+			clock-names = "core", "ref";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 625>;
+			reset-names = "pwr";
+			max-link-speed = <4>;
+			num-lanes = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00400000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x10000000>;
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+			snps,enable-cdm-check;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@e65d0000 {
+			compatible = "renesas,r8a779f0-pcie-ep",
+				     "renesas,rcar-gen4-pcie-ep";
+			reg = <0 0xe65d0000 0 0x2000>, <0 0xe65d2000 0 0x1000>,
+			      <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>,
+			      <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>,
+			      <0 0xfe000000 0 0x400000>;
+			reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+			interrupts = <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma", "sft_ce", "app";
+			clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>;
+			clock-names = "core", "ref";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 624>;
+			reset-names = "pwr";
+			max-link-speed = <4>;
+			num-lanes = <2>;
+			max-functions = /bits/ 8 <2>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@e65d8000 {
+			compatible = "renesas,r8a779f0-pcie-ep",
+				     "renesas,rcar-gen4-pcie-ep";
+			reg = <0 0xe65d8000 0 0x2000>, <0 0xe65da000 0 0x1000>,
+			      <0 0xe65db000 0 0x2000>, <0 0xe65dd000 0 0x1200>,
+			      <0 0xe65de200 0 0x0e00>, <0 0xe65df000 0 0x0400>,
+			      <0 0xee900000 0 0x400000>;
+			reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "addr_space";
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma", "sft_ce", "app";
+			clocks = <&cpg CPG_MOD 625>, <&pcie1_clkref>;
+			clock-names = "core", "ref";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 625>;
+			reset-names = "pwr";
+			max-link-speed = <4>;
+			num-lanes = <2>;
+			max-functions = /bits/ 8 <2>;
+			status = "disabled";
+		};
+
 		ufs: ufs@e6860000 {
 			compatible = "renesas,r8a779f0-ufs";
 			reg = <0 0xe6860000 0 0x100>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
new file mode 100644
index 000000000..abfda5c6c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4 Starter Kit board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "r8a779f4.dtsi"
+
+/ {
+	model = "R-Car S4 Starter Kit board";
+	compatible = "renesas,s4sk", "renesas,r8a779f4", "renesas,r8a779f0";
+
+	aliases {
+		serial0	= &hscif0;
+		serial1	= &hscif1;
+		eth0	= &rswitch;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		/* The last 512MB is reserved for CR. */
+		reg = <0x0 0x48000000 0x0 0x58000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	vcc_sdhi: regulator-vcc-sdhi {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eth_serdes {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "st,24c16", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&sd_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi>;
+	cd-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data", "hscif1_ctrl";
+		function = "hscif1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2";
+		function = "i2c2";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+
+	sd_pins: sd {
+		groups = "mmc_data4", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		drive-strength = <18>;
+		power-source = <3300>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		drive-strength = <18>;
+		power-source = <3300>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&ic99>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ic99: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			phy-handle = <&ic102>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ic102: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
+		port@2 {
+			status = "disabled";
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
+
+&ufs {
+	status = "okay";
+};
+
+&ufs30_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f4.dtsi b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
new file mode 100644
index 000000000..ebed41892
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4-8 (R8A779F4) SoC
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include "r8a779f0.dtsi"
+
+/ {
+	compatible = "renesas,r8a779f4", "renesas,r8a779f0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index d3d25e077..d76775952 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -161,11 +161,6 @@
 		};
 	};
 
-	psci {
-		compatible = "arm,psci-1.0", "arm,psci-0.2";
-		method = "smc";
-	};
-
 	extal_clk: extal {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -185,13 +180,24 @@
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
-	/* External SCIF clock - to be overridden by boards that provide it */
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clocks - to be overridden by boards that provide them */
 	scif_clk: scif {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
 	};
 
+	scif_clk2: scif2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
@@ -681,7 +687,7 @@
 			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 516>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
 			       <&dmac1 0x35>, <&dmac1 0x34>;
@@ -761,7 +767,7 @@
 		avb0: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6800000 0 0x800>;
+			reg = <0 0xe6800000 0 0x1000>;
 			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -808,7 +814,7 @@
 		avb1: ethernet@e6810000 {
 			compatible = "renesas,etheravb-r8a779g0",
 				     "renesas,etheravb-rcar-gen4";
-			reg = <0 0xe6810000 0 0x800>;
+			reg = <0 0xe6810000 0 0x1000>;
 			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
@@ -1057,7 +1063,7 @@
 			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 705>,
 				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
-				 <&scif_clk>;
+				 <&scif_clk2>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
 			       <&dmac1 0x59>, <&dmac1 0x58>;
@@ -1777,6 +1783,37 @@
 			};
 		};
 
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		ipmmu_rt0: iommu@ee480000 {
 			compatible = "renesas,ipmmu-r8a779g0",
 				     "renesas,rcar-gen4-ipmmu-vmsa";
@@ -1886,37 +1923,6 @@
 			#iommu-cells = <1>;
 		};
 
-		mmc0: mmc@ee140000 {
-			compatible = "renesas,sdhi-r8a779g0",
-				     "renesas,rcar-gen4-sdhi";
-			reg = <0 0xee140000 0 0x2000>;
-			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 706>,
-				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
-			clock-names = "core", "clkh";
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 706>;
-			max-frequency = <200000000>;
-			iommus = <&ipmmu_ds0 32>;
-			status = "disabled";
-		};
-
-		rpc: spi@ee200000 {
-			compatible = "renesas,r8a779g0-rpc-if",
-				     "renesas,rcar-gen4-rpc-if";
-			reg = <0 0xee200000 0 0x200>,
-			      <0 0x08000000 0 0x04000000>,
-			      <0 0xee208000 0 0x100>;
-			reg-names = "regs", "dirmap", "wbuf";
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cpg CPG_MOD 629>;
-			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
-			resets = <&cpg 629>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
index 2ab231572..b3f83d0eb 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -109,7 +109,13 @@
 			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
 			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
-			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_EDGE_RISING>,
+			     <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_EDGE_RISING>;
 		interrupt-names = "nmi",
 				  "irq0", "irq1", "irq2", "irq3",
 				  "irq4", "irq5", "irq6", "irq7",
@@ -121,7 +127,9 @@
 				  "tint20", "tint21", "tint22", "tint23",
 				  "tint24", "tint25", "tint26", "tint27",
 				  "tint28", "tint29", "tint30", "tint31",
-				  "bus-err";
+				  "bus-err", "ec7tie1-0", "ec7tie2-0",
+				  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+				  "ec7tiovf-1";
 		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
 			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
 		clock-names = "clk", "pclk";
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 66f68fc2b..081d8f49d 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -905,7 +905,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
 			clock-names = "clk", "pclk";
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 1f1d481dc..0d327464d 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -912,7 +912,27 @@
 				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "nmi", "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+					  "ec7tiovf-1";
 			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
 				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
 			clock-names = "clk", "pclk";
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
new file mode 100644
index 000000000..6315ffa6c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3S SoC
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a08g045-cpg.h>
+
+/ {
+	compatible = "renesas,r9a08g045";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A08G045_CLK_I>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a08g045", "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A08G045_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a08g045-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a08g045-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a08g045-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
+			gpio-ranges = <&pinctrl 0 0 152>;
+			clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_GPIO_RSTN>,
+				 <&cpg R9A08G045_GPIO_PORT_RESETN>,
+				 <&cpg R9A08G045_GPIO_SPARE_RESETN>;
+		};
+
+		irqc: interrupt-controller@11050000 {
+			compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x11050000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nmi",
+					  "irq0", "irq1", "irq2", "irq3",
+					  "irq4", "irq5", "irq6", "irq7",
+					  "tint0", "tint1", "tint2", "tint3",
+					  "tint4", "tint5", "tint6", "tint7",
+					  "tint8", "tint9", "tint10", "tint11",
+					  "tint12", "tint13", "tint14", "tint15",
+					  "tint16", "tint17", "tint18", "tint19",
+					  "tint20", "tint21", "tint22", "tint23",
+					  "tint24", "tint25", "tint26", "tint27",
+					  "tint28", "tint29", "tint30", "tint31",
+					  "bus-err", "ec7tie1-0", "ec7tie2-0",
+					  "ec7tiovf-0";
+			clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>,
+				 <&cpg CPG_MOD R9A08G045_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A08G045_IA55_RESETN>;
+		};
+
+		sdhi0: mmc@11c00000  {
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A08G045_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A08G045_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A08G045_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A08G045_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A08G045_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A08G045_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@11c20000 {
+			compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_SDHI2_IMCLK>,
+				 <&cpg CPG_MOD R9A08G045_SDHI2_CLK_HS>,
+				 <&cpg CPG_MOD R9A08G045_SDHI2_IMCLK2>,
+				 <&cpg CPG_MOD R9A08G045_SDHI2_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A08G045_SDHI2_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c30000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c40000 {
+			compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth";
+			reg = <0 0x11c40000 0 0x10000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>,
+				 <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A08G045_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@12400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x12400000 0 0x40000>,
+			      <0x0 0x12440000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts
new file mode 100644
index 000000000..6b57e0e02
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g045s33-smarc.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3S SMARC EVK board
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a08g045s33.dtsi"
+#include "rzg3s-smarc-som.dtsi"
+#include "rzg3s-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK version 2 based on r9a08g045s33";
+	compatible = "renesas,smarc2-evk", "renesas,rzg3s-smarcm",
+		     "renesas,r9a08g045s33", "renesas,r9a08g045";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi
new file mode 100644
index 000000000..3351f26c7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a08g045s33.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G3S R9A08G045S33 SoC specific part
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a08g045.dtsi"
+
+/ {
+	compatible = "renesas,r9a08g045s33", "renesas,r9a08g045";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 33f2ecf42..50ed66d42 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -163,7 +163,7 @@
 		};
 
 		avb: ethernet@a3300000 {
-			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m";
 			reg = <0 0xa3300000 0 0x800>;
 			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
 				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
index a7594ba3a..b7a3e6caa 100644
--- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -32,12 +32,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	audio_mclock: audio_mclock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
 	snd_rzg2l: sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,format = "i2s";
@@ -55,7 +49,7 @@
 		};
 
 		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_mclock>;
+			clocks = <&versa3 2>;
 			sound-dai = <&wm8978>;
 		};
 	};
@@ -76,6 +70,12 @@
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 	};
+
+	x1: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &audio_clk1 {
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 547859c38..4409c4723 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -312,6 +312,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 68eab8e26..37807f1bd 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -110,6 +110,26 @@
 		#sound-dai-cells = <0>;
 		reg = <0x1a>;
 	};
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5p35023";
+		reg = <0x68>;
+		#clock-cells = <1>;
+		clocks = <&x1>;
+
+		renesas,settings = [
+			80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+			00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+			80 b0 45 c4 95
+		];
+
+		assigned-clocks = <&versa3 0>, <&versa3 1>,
+				  <&versa3 2>, <&versa3 3>,
+				  <&versa3 4>, <&versa3 5>;
+		assigned-clock-rates = <24000000>, <11289600>,
+				       <11289600>, <12000000>,
+				       <25000000>, <12288000>;
+	};
 };
 
 #if PMOD_MTU3
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 56ff92453..5e4209d6f 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -241,6 +241,7 @@
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
 
 		partitions {
 			compatible = "fixed-partitions";
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 83fce96a2..859bc8745 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -126,6 +126,26 @@
 		#sound-dai-cells = <0>;
 		reg = <0x1a>;
 	};
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5p35023";
+		reg = <0x68>;
+		#clock-cells = <1>;
+		clocks = <&x1>;
+
+		renesas,settings = [
+			80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+			00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+			80 b0 45 c4 95
+		];
+
+		assigned-clocks = <&versa3 0>, <&versa3 1>,
+				  <&versa3 2>, <&versa3 3>,
+				  <&versa3 4>, <&versa3 5>;
+		assigned-clock-rates = <24000000>, <11289600>,
+				       <11289600>, <12000000>,
+				       <25000000>, <12288000>;
+	};
 };
 
 #if PMOD_MTU3
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
index 8eb411aac..de590996e 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
@@ -20,6 +20,30 @@
 	sound-dai = <&ssi1>;
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5p35023";
+		reg = <0x68>;
+		#clock-cells = <1>;
+		clocks = <&x1>;
+
+		renesas,settings = [
+			80 00 11 19 4c 02 23 7f 83 19 08 a9 5f 25 24 bf
+			00 14 7a e1 00 00 00 00 01 55 59 bb 3f 30 90 b6
+			80 b0 45 c4 95
+		];
+
+		assigned-clocks = <&versa3 0>, <&versa3 1>,
+				  <&versa3 2>, <&versa3 3>,
+				  <&versa3 4>, <&versa3 5>;
+		assigned-clock-rates = <24000000>, <11289600>,
+				       <11289600>, <12000000>,
+				       <25000000>, <12288000>;
+	};
+};
+
 &i2c1 {
 	wm8978: codec@1a {
 		compatible = "wlf,wm8978";
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
new file mode 100644
index 000000000..d33ab4c88
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R9A08G045S33 SMARC Carrier-II's SoM board.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * On-board switches' states:
+ * @SW_OFF: switch's state is OFF
+ * @SW_ON:  switch's state is ON
+ */
+#define SW_OFF		0
+#define SW_ON		1
+
+/*
+ * SW_CONFIG[x] switches' states:
+ * @SW_CONFIG2:
+ *	SW_OFF - SD0 is connected to eMMC
+ *	SW_ON  - SD0 is connected to uSD0 card
+ * @SW_CONFIG3:
+ *	SW_OFF - SD2 is connected to SoC
+ *	SW_ON  - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
+ */
+#define SW_CONFIG2	SW_ON
+#define SW_CONFIG3	SW_ON
+
+/ {
+	compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045";
+
+	aliases {
+		mmc0 = &sdhi0;
+#if SW_CONFIG3 == SW_OFF
+		mmc2 = &sdhi2;
+#else
+		eth0 = &eth0;
+		eth1 = &eth1;
+#endif
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* First 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	vcc_sdhi0: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+#if SW_CONFIG2 == SW_ON
+	vccq_sdhi0: regulator1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+#else
+	reg_1p8v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+#endif
+
+	vcc_sdhi2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+#if SW_CONFIG3 == SW_ON
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		reg = <7>;
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>;
+		rxc-skew-psec = <0>;
+		txc-skew-psec = <0>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+#endif
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+#if SW_CONFIG2 == SW_ON
+/* SD0 slot */
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <125000000>;
+	status = "okay";
+};
+#else
+/* eMMC */
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <125000000>;
+	status = "okay";
+};
+#endif
+
+#if SW_CONFIG3 == SW_OFF
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sdhi2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	status = "okay";
+};
+#endif
+
+&pinctrl {
+#if SW_CONFIG3 == SW_ON
+	eth0-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth0-phy-irq";
+	};
+#endif
+
+	eth0_pins: eth0 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* ET0_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* ET0_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>,	/* ET0_TXD0 */
+				 <RZG2L_PORT_PINMUX(1, 3, 1)>,	/* ET0_TXD1 */
+				 <RZG2L_PORT_PINMUX(1, 4, 1)>,	/* ET0_TXD2 */
+				 <RZG2L_PORT_PINMUX(2, 0, 1)>,	/* ET0_TXD3 */
+				 <RZG2L_PORT_PINMUX(3, 0, 1)>,	/* ET0_RXC */
+				 <RZG2L_PORT_PINMUX(3, 1, 1)>,	/* ET0_RX_CTL */
+				 <RZG2L_PORT_PINMUX(3, 2, 1)>,	/* ET0_RXD0 */
+				 <RZG2L_PORT_PINMUX(3, 3, 1)>,	/* ET0_RXD1 */
+				 <RZG2L_PORT_PINMUX(4, 0, 1)>,	/* ET0_RXD2 */
+				 <RZG2L_PORT_PINMUX(4, 1, 1)>,	/* ET0_RXD3 */
+				 <RZG2L_PORT_PINMUX(4, 3, 1)>,	/* ET0_MDC */
+				 <RZG2L_PORT_PINMUX(4, 4, 1)>,	/* ET0_MDIO */
+				 <RZG2L_PORT_PINMUX(4, 5, 1)>;	/* ET0_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
+#if SW_CONFIG3 == SW_ON
+	eth1-phy-irq-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "eth1-phy-irq";
+	};
+#endif
+
+	eth1_pins: eth1 {
+		txc {
+			pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>;	/* ET1_TXC */
+			power-source = <1800>;
+			output-enable;
+			input-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		tx_ctl {
+			pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>;	/* ET1_TX_CTL */
+			power-source = <1800>;
+			output-enable;
+			drive-strength-microamp = <5200>;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>,	/* ET1_TXD0 */
+				 <RZG2L_PORT_PINMUX(7, 3, 1)>,	/* ET1_TXD1 */
+				 <RZG2L_PORT_PINMUX(7, 4, 1)>,	/* ET1_TXD2 */
+				 <RZG2L_PORT_PINMUX(8, 0, 1)>,	/* ET1_TXD3 */
+				 <RZG2L_PORT_PINMUX(8, 4, 1)>,	/* ET1_RXC */
+				 <RZG2L_PORT_PINMUX(9, 0, 1)>,	/* ET1_RX_CTL */
+				 <RZG2L_PORT_PINMUX(9, 1, 1)>,	/* ET1_RXD0 */
+				 <RZG2L_PORT_PINMUX(9, 2, 1)>,	/* ET1_RXD1 */
+				 <RZG2L_PORT_PINMUX(9, 3, 1)>,	/* ET1_RXD2 */
+				 <RZG2L_PORT_PINMUX(10, 0, 1)>,	/* ET1_RXD3 */
+				 <RZG2L_PORT_PINMUX(10, 2, 1)>,	/* ET1_MDC */
+				 <RZG2L_PORT_PINMUX(10, 3, 1)>,	/* ET1_MDIO */
+				 <RZG2L_PORT_PINMUX(10, 4, 1)>;	/* ET1_LINKSTA */
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_uhs_pins: sd0-uhs {
+		data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_emmc_pins: sd0-emmc {
+		pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+		       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7",
+		       "SD0_CLK", "SD0_CMD", "SD0_RST#";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		data {
+			pins = "P11_2", "P11_3", "P12_0", "P12_1";
+			input-enable;
+		};
+
+		ctrl {
+			pins = "P11_1";
+			input-enable;
+		};
+
+		mux {
+			pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */
+				 <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */
+				 <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */
+				 <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */
+				 <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */
+				 <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */
+				 <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
new file mode 100644
index 000000000..214520137
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ SMARC Carrier-II Board.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		mmc1 = &sdhi1;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&pinctrl {
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */
+			 <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */
+	};
+
+	sdhi1_pins: sd1 {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1-uhs {
+		data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scif0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	max-frequency = <125000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 4a3d50378..1eb4883b3 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -822,7 +822,7 @@
 		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 		 <&audio_clk_a>, <&cs2000>,
 		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+		 <&cpg CPG_MOD 922>;
 
 	ports {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
index 672b0a224..be6d7a035 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
@@ -21,14 +21,14 @@
 / {
 	sound_card: sound {
 		compatible = "audio-graph-scu-card";
-		label = "rcar-sound";
+		label = "snd-ulcb-mix";
 
 		routing = "ak4613 Playback", "DAI0 Playback",
 			  "ak4613 Playback", "DAI1 Playback",
 			  "DAI0 Capture",    "ak4613 Capture";
 
-		dais = <&rsnd_port0 /* (A) CPU0 */
-			&rsnd_port1 /* (B) CPU1 */
+		dais = <&snd_ulcb1 /* (A) CPU0 */
+			&snd_ulcb2 /* (B) CPU1 */
 		>;
 	};
 };
@@ -58,14 +58,18 @@
 };
 
 &rcar_sound {
-	ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		reg = <0>;
 
 		/*
 		 * (A) CPU0
 		 */
-		rsnd_port0: port@0 {
+		snd_ulcb1: port@0 {
 			reg = <0>;
 			rsnd_for_ak4613_1: endpoint {
 				remote-endpoint = <&ak4613_ep1>;
@@ -78,7 +82,7 @@
 		/*
 		 * (B) CPU1
 		 */
-		rsnd_port1: port@1 {
+		snd_ulcb2: port@1 {
 			reg = <1>;
 			rsnd_for_ak4613_2: endpoint {
 				remote-endpoint = <&ak4613_ep2>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
index 3be54df64..3f1df6ee1 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
@@ -18,10 +18,10 @@
 / {
 	sound_card: sound {
 		compatible = "audio-graph-card";
-		label = "rcar-sound";
+		label = "snd-ulcb";
 
-		dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
-			&rsnd_port1 /* (B) CPU1  -> HDMI   */
+		dais = <&snd_ulcb1 /* (A) CPU0 <-> ak4613 */
+			&snd_ulcb2 /* (B) CPU1  -> HDMI   */
 		>;
 	};
 };
@@ -53,10 +53,15 @@
 };
 
 &rcar_sound {
-	ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		rsnd_port0: port@0 {
+		reg = <0>;
+
+		snd_ulcb1: port@0 {
 			/*
 			 * (A) CPU0 <-> ak4613
 			 */
@@ -69,7 +74,7 @@
 				capture  = <&ssi1>, <&src1>, <&dvc1>;
 			};
 		};
-		rsnd_port1: port@1 {
+		snd_ulcb2: port@1 {
 			/*
 			 * (B) CPU1 -> HDMI
 			 */
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
index 75b024e3f..8966e6a7d 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
@@ -20,13 +20,12 @@
 / {
 	sound_card: sound {
 		compatible = "audio-graph-card2";
-		label = "rcar-sound";
+		label = "snd-ulcb-mix";
 
 		routing = "ak4613 Playback", "DAI0 Playback",
 			  "ak4613 Playback", "DAI1 Playback",
 			  "DAI0 Capture",    "ak4613 Capture";
 
-		/delete-property/ dais;
 		links = <&fe_a		/* (A) CPU0   */
 			 &fe_b		/* (B) CPU1   */
 			 &be_x		/* (X) ak4613 */
@@ -50,14 +49,12 @@
 			};
 
 			ports@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				reg = <1>;
 				/*
 				 * BE
 				 * (X) ak4613
 				 */
-				be_x: port@0 { reg = <0>; be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; };
+				be_x: port { be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; };
 			};
 		};
 	};
@@ -78,9 +75,13 @@
 };
 
 &rcar_sound {
-	ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		reg = <0>;
 
 		/*
 		 * (A) CPU0
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
index 5ebec1235..19fa6e102 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
@@ -20,7 +20,7 @@
 	compatible = "audio-graph-card2";
 
 	/delete-property/ dais;
-	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
-		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
+	links = <&snd_ulcb1	/* (A) CPU0 <-> ak4613 */
+		 &snd_ulcb2	/* (B) CPU1  -> HDMI   */
 		>;
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
index 9b0135494..8ae6af1af 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
@@ -19,32 +19,31 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
- *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
- *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
- *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
- *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *	(C) aplay   -D plughw:1,0 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:1,1 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:1,2 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:0,6 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav
  */
+/ {
+	sound_card_kf: expand-sound {
+		compatible = "audio-graph-scu-card";
+		label = "snd-kf-split";
 
-&sound_card {
-	routing = "ak4613 Playback",   "DAI0 Playback",
-		  "ak4613 Playback",   "DAI1 Playback",
-		  "DAI0 Capture",      "ak4613 Capture",
-		  "pcm3168a Playback", "DAI2 Playback",
-		  "pcm3168a Playback", "DAI3 Playback",
-		  "pcm3168a Playback", "DAI4 Playback",
-		  "pcm3168a Playback", "DAI5 Playback";
+		routing = "pcm3168a Playback", "DAI2 Playback",
+			  "pcm3168a Playback", "DAI3 Playback",
+			  "pcm3168a Playback", "DAI4 Playback",
+			  "pcm3168a Playback", "DAI5 Playback";
 
-	dais = <&rsnd_port0 /* (A) CPU0 */
-		&rsnd_port1 /* (B) CPU1 */
-		&rsnd_port2 /* (C) CPU2 */
-		&rsnd_port3 /* (D) CPU3 */
-		&rsnd_port4 /* (E) CPU4 */
-		&rsnd_port5 /* (F) CPU5 */
-		&rsnd_port6 /* (G) GPU6 */
-	>;
+		dais = <&snd_kf1 /* (C) CPU2 */
+			&snd_kf2 /* (D) CPU3 */
+			&snd_kf3 /* (E) CPU4 */
+			&snd_kf4 /* (F) CPU5 */
+			&snd_kf5 /* (G) GPU6 */
+		>;
+	};
 };
 
 &pcm3168a {
@@ -103,13 +102,15 @@
 };
 
 &rcar_sound {
-	ports {
-		/* rsnd_port0-1 are defined in ulcb.dtsi */
+	ports@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
 
 		/*
 		 * (C) CPU2
 		 */
-		rsnd_port2: port@2 {
+		snd_kf1: port@2 {
 			reg = <2>;
 			rsnd_for_pcm3168a_play1: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p1>;
@@ -121,7 +122,7 @@
 		/*
 		 * (D) CPU3
 		 */
-		rsnd_port3: port@3 {
+		snd_kf2: port@3 {
 			reg = <3>;
 			rsnd_for_pcm3168a_play2: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p2>;
@@ -133,7 +134,7 @@
 		/*
 		 * (E) CPU4
 		 */
-		rsnd_port4: port@4 {
+		snd_kf3: port@4 {
 			reg = <4>;
 			rsnd_for_pcm3168a_play3: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p3>;
@@ -145,7 +146,7 @@
 		/*
 		 * (F) CPU5
 		 */
-		rsnd_port5: port@5 {
+		snd_kf4: port@5 {
 			reg = <5>;
 			rsnd_for_pcm3168a_play4: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p4>;
@@ -157,7 +158,7 @@
 		/*
 		 * (G) CPU6
 		 */
-		rsnd_port6: port@6 {
+		snd_kf5: port@6 {
 			reg = <6>;
 			rsnd_for_pcm3168a_capture: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_c>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
index 1db99b760..5fbd4ca83 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
@@ -13,18 +13,20 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav
  *	(B) aplay   -D plughw:0,1 xxx.wav
- *	(C) aplay   -D plughw:0,2 xxx.wav
+ *	(C) aplay   -D plughw:1,0 xxx.wav
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(D) arecord -D plughw:0,3 xxx.wav
+ *	(D) arecord -D plughw:1,1 xxx.wav
  */
+/ {
+	sound_card_kf: expand-sound {
+		compatible = "audio-graph-card";
+		label = "snd-kf";
 
-&sound_card {
-	dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
-		&rsnd_port1 /* (B) CPU1  -> HDMI   */
-		&rsnd_port2 /* (C) CPU2  -> PCM3168A-p */
-		&rsnd_port3 /* (D) CPU3 <-  PCM3168A-c */
+		dais = <&snd_kf1 /* (C) CPU2  -> PCM3168A-p */
+			&snd_kf2 /* (D) CPU3 <-  PCM3168A-c */
 		>;
+	};
 };
 
 &pcm3168a {
@@ -56,12 +58,15 @@
 };
 
 &rcar_sound {
-	ports {
-		/* rsnd_port0/1 are defined in ulcb.dtsi */
+	ports@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
 		/*
 		 * (C) CPU2 -> PCM3168A-p
 		 */
-		rsnd_port2: port@2 {
+		snd_kf1: port@2 {
 			reg = <2>;
 			rsnd_for_pcm3168a_play: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p>;
@@ -74,7 +79,7 @@
 		/*
 		 * (D) CPU3 <- PCM3168A-c
 		 */
-		rsnd_port3: port@3 {
+		snd_kf2: port@3 {
 			reg = <3>;
 			rsnd_for_pcm3168a_capture: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_c>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
index da644128a..4cf632bc4 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
@@ -19,61 +19,65 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
- *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
- *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
- *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
- *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *	(C) aplay   -D plughw:1,0 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:1,1 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:1,2 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:0,6 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav
  */
-&sound_card {
-	routing = "ak4613 Playback",   "DAI0 Playback",
-		  "ak4613 Playback",   "DAI1 Playback",
-		  "DAI0 Capture",      "ak4613 Capture",
-		  "pcm3168a Playback", "DAI2 Playback",
-		  "pcm3168a Playback", "DAI3 Playback",
-		  "pcm3168a Playback", "DAI4 Playback",
-		  "pcm3168a Playback", "DAI5 Playback",
-		  "DAI6 Capture",      "pcm3168a Capture";
+/ {
+	sound_card_kf: expand-sound {
+		compatible = "audio-graph-card2";
+		label = "snd-kf-split";
 
-	/delete-property/ dais;
-	links = <&fe_a		/* (A) CPU0	  */
-		 &fe_b		/* (B) CPU1	  */
-		 &fe_c		/* (C) CPU2	  */
-		 &fe_d		/* (D) CPU3	  */
-		 &fe_e		/* (E) CPU4	  */
-		 &fe_f		/* (F) CPU5	  */
-		 &rsnd_g	/* (G) CPU6	  */
-		 &be_x		/* (X) ak4613	  */
-		 &be_y		/* (Y) PCM3168A-p */
-	>;
+		routing = "pcm3168a Playback", "DAI2 Playback",
+			  "pcm3168a Playback", "DAI3 Playback",
+			  "pcm3168a Playback", "DAI4 Playback",
+			  "pcm3168a Playback", "DAI5 Playback",
+			  "DAI6 Capture",      "pcm3168a Capture";
 
-	dpcm {
-		ports@0 {
-		/*
-		 * FE
-		 *
-		 * (A)/(B) are defined on ulcb
-		 * (C) CPU2
-		 * (D) CPU3
-		 * (E) CPU4
-		 * (F) CPU5
-		 */
-		fe_c:	port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; };
-		fe_d:	port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; };
-		fe_e:	port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; };
-		fe_f:	port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; };
-		};
+		links = <&fe_c		/* (C) CPU2	  */
+			 &fe_d		/* (D) CPU3	  */
+			 &fe_e		/* (E) CPU4	  */
+			 &fe_f		/* (F) CPU5	  */
+			 &rsnd_g	/* (G) CPU6	  */
+			 &be_y		/* (Y) PCM3168A-p */
+		>;
 
-		ports@1 {
-		/*
-		 * BE
-		 *
-		 * (X) is defined on ulcb
-		 * (Y) PCM3168A-p
-		 */
-		be_y:	port@1 { reg = <1>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+		dpcm {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				/*
+				 * FE
+				 *
+				 * (C) CPU2
+				 * (D) CPU3
+				 * (E) CPU4
+				 * (F) CPU5
+				 */
+			fe_c:	port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; };
+			fe_d:	port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; };
+			fe_e:	port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; };
+			fe_f:	port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; };
+			};
+
+			ports@1 {
+				reg = <1>;
+				/*
+				 * BE
+				 *
+				 * (Y) PCM3168A-p
+				 */
+			be_y:	port { be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+			};
 		};
 	};
 };
@@ -111,8 +115,10 @@
 };
 
 &rcar_sound {
-	ports {
-		/* (A)/(B) are defined in ulcb.dtsi */
+	ports@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
 
 		/*
 		 * (C) CPU2
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
index c30e05653..4fc229418 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
@@ -13,18 +13,18 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav
  *	(B) aplay   -D plughw:0,1 xxx.wav
- *	(C) aplay   -D plughw:0,2 xxx.wav
+ *	(C) aplay   -D plughw:1,0 xxx.wav
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(D) arecord -D plughw:0,3 xxx.wav
+ *	(D) arecord -D plughw:1,1 xxx.wav
  */
 #include "ulcb-kf-audio-graph-card.dtsi"
 
-&sound_card {
+&sound_card_kf {
+	compatible = "audio-graph-card2";
+
 	/delete-property/ dais;
-	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
-		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
-		 &rsnd_port2	/* (C) CPU2  -> PCM3168A-p */
-		 &rsnd_port3	/* (D) CPU3 <-  PCM3168A-c */
+	links = <&snd_kf1 /* (C) CPU2  -> PCM3168A-p */
+		 &snd_kf2 /* (D) CPU3 <-  PCM3168A-c */
 		>;
 };
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
index bc221f994..f01d91aaa 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
@@ -19,89 +19,92 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
  *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
- *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
- *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
- *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
- *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *	(C) aplay   -D plughw:1,0 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:1,1 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:1,2 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:1,3 xxx.wav (TDM-3)
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(G) arecord -D plughw:0,6 xxx.wav
+ *	(G) arecord -D plughw:1,4 xxx.wav
  */
 
-&sound_card {
-
-	simple-audio-card,routing = "ak4613 Playback",   "DAI0 Playback",
-				    "ak4613 Playback",   "DAI1 Playback",
-				    "DAI0 Capture",      "ak4613 Capture",
-				    "pcm3168a Playback", "DAI2 Playback",
-				    "pcm3168a Playback", "DAI3 Playback",
-				    "pcm3168a Playback", "DAI4 Playback",
-				    "pcm3168a Playback", "DAI5 Playback";
-
-	/* dai-link@0 is defined in ulcb.dtsi */
-
-	simple-audio-card,dai-link@1 {
+/ {
+	sound_card_kf: expand-sound {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reg = <1>;
-		convert-channels = <8>; /* to 8ch TDM */
 
-		/*
-		 * (C) CPU2
-		 */
-		cpu@0 {
+		compatible = "simple-scu-audio-card";
+		label = "snd-kf-split";
+
+		simple-audio-card,routing = "pcm3168a Playback", "DAI2 Playback",
+					    "pcm3168a Playback", "DAI3 Playback",
+					    "pcm3168a Playback", "DAI4 Playback",
+					    "pcm3168a Playback", "DAI5 Playback";
+
+		simple-audio-card,dai-link@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			reg = <0>;
-			bitclock-master;
-			frame-master;
-			sound-dai = <&rcar_sound 2>;
+			convert-channels = <8>; /* to 8ch TDM */
+
+			/*
+			 * (C) CPU2
+			 */
+			cpu@0 {
+				reg = <0>;
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 2>;
+			};
+			/*
+			 * (D) CPU3
+			 */
+			cpu@1 {
+				reg = <1>;
+				sound-dai = <&rcar_sound 3>;
+			};
+			/*
+			 * (E) CPU4
+			 */
+			cpu@2 {
+				reg = <2>;
+				sound-dai = <&rcar_sound 4>;
+			};
+			/*
+			 * (F) CPU5
+			 */
+			cpu@3 {
+				reg = <3>;
+				sound-dai = <&rcar_sound 5>;
+			};
+			/*
+			 * (Y) PCM3168A-p
+			 */
+			codec {
+				prefix = "pcm3168a";
+				mclk-fs = <512>;
+				sound-dai = <&pcm3168a 0>;
+			};
 		};
-		/*
-		 * (D) CPU3
-		 */
-		cpu@1 {
+
+		simple-audio-card,dai-link@1 {
 			reg = <1>;
-			sound-dai = <&rcar_sound 3>;
-		};
-		/*
-		 * (E) CPU4
-		 */
-		cpu@2 {
-			reg = <2>;
-			sound-dai = <&rcar_sound 4>;
-		};
-		/*
-		 * (F) CPU5
-		 */
-		cpu@3 {
-			reg = <3>;
-			sound-dai = <&rcar_sound 5>;
-		};
-		/*
-		 * (Y) PCM3168A-p
-		 */
-		codec {
-			prefix = "pcm3168a";
-			mclk-fs = <512>;
-			sound-dai = <&pcm3168a 0>;
-		};
-	};
-	simple-audio-card,dai-link@2 {
-		reg = <2>;
-		/*
-		 * (G) CPU6
-		 */
-		cpu {
-			bitclock-master;
-			frame-master;
-			sound-dai = <&rcar_sound 6>;
-		};
-		/*
-		 * (Z) PCM3168A-c
-		 */
-		codec {
-			prefix = "pcm3168a";
-			mclk-fs = <512>;
-			sound-dai = <&pcm3168a 1>;
+			/*
+			 * (G) CPU6
+			 */
+			cpu {
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 6>;
+			};
+			/*
+			 * (Z) PCM3168A-c
+			 */
+			codec {
+				prefix = "pcm3168a";
+				mclk-fs = <512>;
+				sound-dai = <&pcm3168a 1>;
+			};
 		};
 	};
 };
@@ -115,7 +118,8 @@
 };
 
 &rcar_sound {
-	rcar_sound,dai {
+	rcar_sound,dai@1 {
+		reg = <1>;
 
 		/* dai0-1 are defined in ulcb.dtsi */
 
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
index 2010e8ac7..28d29ecfb 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
@@ -13,45 +13,51 @@
  *
  *	(A) aplay   -D plughw:0,0 xxx.wav
  *	(B) aplay   -D plughw:0,1 xxx.wav
- *	(C) aplay   -D plughw:0,2 xxx.wav
+ *	(C) aplay   -D plughw:1,0 xxx.wav
  *
  *	(A) arecord -D plughw:0,0 xxx.wav
- *	(D) arecord -D plughw:0,3 xxx.wav
+ *	(D) arecord -D plughw:1,1 xxx.wav
  */
 
-&sound_card {
-	/* dai-link@0/1 are defined in ulcb.dtsi */
+/ {
+	sound_card_kf: expand-sound {
+		compatible = "simple-audio-card";
+		label = "snd-kf";
 
-	/*
-	 * (C) CPU2 -> PCM3168A-p
-	 */
-	simple-audio-card,dai-link@2 {
-		reg = <2>;
-		cpu {
-			bitclock-master;
-			frame-master;
-			dai-tdm-slot-num = <8>;
-			sound-dai = <&rcar_sound 2>;
-		};
-		codec {
-			mclk-fs = <512>;
-			sound-dai = <&pcm3168a 0>;
-		};
-	};
-	/*
-	 * (D) CPU3 <- PCM3168A-c
-	 */
-	simple-audio-card,dai-link@3 {
-		reg = <3>;
-		cpu {
-			bitclock-master;
-			frame-master;
-			dai-tdm-slot-num = <6>;
-			sound-dai = <&rcar_sound 3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <8>;
+				sound-dai = <&rcar_sound 2>;
+			};
+			codec {
+				mclk-fs = <512>;
+				sound-dai = <&pcm3168a 0>;
+			};
 		};
-		codec {
-			mclk-fs = <512>;
-			sound-dai = <&pcm3168a 1>;
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <6>;
+				sound-dai = <&rcar_sound 3>;
+			};
+			codec {
+				mclk-fs = <512>;
+				sound-dai = <&pcm3168a 1>;
+			};
 		};
 	};
 };
@@ -65,9 +71,8 @@
 };
 
 &rcar_sound {
-
-	rcar_sound,dai {
-		/* dai0-1 are defined in ulcb.dtsi */
+	rcar_sound,dai@1 {
+		reg = <1>;
 
 		/*
 		 * (C) CPU2 -> PCM3168A-p
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 3885ef345..50de17e4f 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 
@@ -294,6 +295,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -314,6 +316,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 	};
@@ -324,6 +327,7 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
+		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 	};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
index 217d89019..9b955510e 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
@@ -24,7 +24,7 @@
 		#size-cells = <0>;
 
 		compatible = "simple-scu-audio-card";
-		label = "rcar-sound";
+		label = "snd-ulcb-mix";
 
 		simple-audio-card,prefix  = "ak4613";
 		simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
@@ -72,9 +72,13 @@
 };
 
 &rcar_sound {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	#sound-dai-cells = <1>;
 
-	rcar_sound,dai {
+	rcar_sound,dai@0 {
+		reg = <0>;
+
 		/*
 		 * (A) CPU0
 		 */
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
index 751cfd8c5..ba0e188e7 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
@@ -18,7 +18,7 @@
 / {
 	sound_card: sound {
 		compatible = "simple-audio-card";
-		label = "rcar-sound";
+		label = "snd-ulcb";
 
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -69,9 +69,13 @@
 };
 
 &rcar_sound {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	#sound-dai-cells = <1>;
 
-	rcar_sound,dai {
+	rcar_sound,dai@0 {
+		reg = <0>;
+
 		/*
 		 * (A) CPU0 <-> ak4613
 		 */
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0be271665..a2f66f916 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -383,7 +383,7 @@
 		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 		 <&audio_clk_a>, <&cs2000>,
 		 <&audio_clk_c>,
-		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+		 <&cpg CPG_MOD 922>;
 };
 
 &rpc {
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e7728007f..a7b30e11b 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
@@ -77,6 +78,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
@@ -97,11 +101,18 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
index 3429e124d..5b4e22385 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -7,6 +7,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index c1bbd555f..0a90a88fc 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -14,6 +14,7 @@
 	compatible = "rockchip,px30-evb", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
index de0a1f2af..16798eb77 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -13,6 +13,7 @@
 	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc2 = &sdmmc;
 	};
 
@@ -86,7 +87,7 @@
 	sgtl5000_clk: sgtl5000-oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <24576000>;
+		clock-frequency = <24576000>;
 	};
 
 	dc_12v: dc-12v-regulator {
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 42ce78beb..9137dd76e 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -20,7 +20,6 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -632,6 +631,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 12>, <&dmac 13>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
 		#address-cells = <1>;
@@ -647,6 +647,7 @@
 		clock-names = "spiclk", "apb_pclk";
 		dmas = <&dmac 14>, <&dmac 15>;
 		dma-names = "tx", "rx";
+		num-cs = <2>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index e9810d2f0..b47fe02c3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -143,6 +143,68 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "header1-pin3 [GPIO0_B3]",
+		"header1-pin5 [GPIO0_B4]", "", "",
+		"header1-pin11 [GPIO0_B7]",
+		/* GPIO0_C0 - C7 */
+		"header1-pin13 [GPIO0_C0]",
+		"header1-pin15 [GPIO0_C1]", "", "", "",
+		"", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "header1-pin21 [GPIO1_C6]",
+		"header1-pin19 [GPIO1_C7]",
+		/* GPIO1_D0 - D7 */
+		"header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]",
+		"", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]",
+		"", "",
+		"header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]",
+		"header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]",
+		/* GPIO2_B0 - B7 */
+		"header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]",
+		"header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]",
+		"header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]",
+		"header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_B0 - B7 */
+		"", "", "header2-pin42 [GPIO3_B2]",
+		"header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]",
+		"header2-pin39 [GPIO3_B5]", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index 2ae4bb7d5..cfc0a87b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -20,6 +20,11 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
index 1deef53a4..c7b1862fc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -9,6 +9,7 @@
 	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
index ce318e05f..f4d20f29c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -6,30 +6,16 @@
  */
 
 /dts-v1/;
-#include "rk3326-odroid-go.dtsi"
+#include "rk3326-anbernic-rg351m.dtsi"
 
 / {
 	model = "Anbernic RG351M";
 	compatible = "anbernic,rg351m", "rockchip,rk3326";
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm0 0 1000000 0>;
-		pwm-names = "enable";
-	};
 };
 
-/delete-node/ &builtin_gamepad;
-/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
-
 &internal_display {
 	compatible = "elida,kd35t133";
 	iovcc-supply = <&vcc_lcd>;
+	rotation = <270>;
 	vdd-supply = <&vcc_lcd>;
 };
-
-&pwm0 {
-	status = "okay";
-};
-
-/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
new file mode 100644
index 000000000..b6d041dbe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	/*
+	 * LED is a tri-state. Driven high it is red, driven low it is
+	 * green, and not driven at all (pin set to input) it is amber.
+	 * Additionally, there is a 2nd LED that is not controllable
+	 * that is on (red) when plugged in to power.
+	 */
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin>;
+
+		red_green_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_logic";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <950000>;
+				regulator-name = "vdd_arm";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "vdd_1v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_sd";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_bl";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-max-microvolt = <2800000>;
+				regulator-min-microvolt = <2800000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc_wifi: LDO_REG9 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			usb_midu: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5400000>;
+				regulator-min-microvolt = <5000000>;
+				regulator-name = "usb_midu";
+			};
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	#address-cells = <1>;
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
new file mode 100644
index 000000000..c79f7a7b3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3326-anbernic-rg351m.dtsi"
+
+/ {
+	model = "Anbernic RG351V";
+	compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&internal_display {
+	compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+	vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+	vccio1-supply = <&vccio_sd>;
+};
+
+&vcc_sd {
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+	regulator-max-microvolt = <1800000>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 40bf80864..824183e51 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -9,6 +9,7 @@
 	compatible = "azw,beelink-a1", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index ff6b466e0..1eef55044 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -11,6 +11,7 @@
 	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &sdio;
 		mmc2 = &emmc;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 1445b879a..a4399da7d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -14,6 +14,7 @@
 	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
index dc83d7404..f20662929 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		ethernet1 = &rtl8153;
 		mmc0 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 5d5d95740..414897a57 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -11,6 +11,7 @@
 	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 018a3a507..3cda6c627 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -21,6 +21,8 @@
 	compatible = "radxa,rockpi-e", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
@@ -180,6 +182,59 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		/* GPIO0_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO0_D0 - D7 */
+		"", "", "", "pin-15 [GPIO0_D3]", "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* GPIO1_A0 - A7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_B0 - B7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO1_D0 - D7 */
+		"", "", "", "", "pin-07 [GPIO1_D4]", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* GPIO2_A0 - A7 */
+		"pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]",
+		"pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]",
+		"pin-33 [GPIO2_A6]", "",
+		/* GPIO2_B0 - B7 */
+		"", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]",
+		/* GPIO2_C0 - C7 */
+		"pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]",
+		"pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]",
+		"pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]",
+		/* GPIO2_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		/* GPIO3_A0 - A7 */
+		"pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]",
+		"", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "",
+		/* GPIO3_B0 - B7 */
+		"pin-24 [GPIO3_B0]", "", "", "", "", "", "", "",
+		/* GPIO3_C0 - C7 */
+		"", "", "", "", "", "", "", "",
+		/* GPIO3_D0 - D7 */
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 0a27fa527..229fe9da9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -11,6 +11,7 @@
 	compatible = "pine64,rock64", "rockchip,rk3328";
 
 	aliases {
+		ethernet0 = &gmac2io;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index cc8209795..b6f045069 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -20,6 +20,10 @@
 	#size-cells = <2>;
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -27,8 +31,6 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
-		ethernet0 = &gmac2io;
-		ethernet1 = &gmac2phy;
 	};
 
 	cpus {
@@ -486,7 +488,6 @@
 	pwm3: pwm@ff1b0030 {
 		compatible = "rockchip,rk3328-pwm";
 		reg = <0x0 0xff1b0030 0x0 0x10>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
 		clock-names = "pwm", "pclk";
 		pinctrl-names = "default";
@@ -743,11 +744,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
 				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -916,6 +926,8 @@
 		resets = <&cru SRST_GMAC2IO_A>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		status = "disabled";
 	};
@@ -938,6 +950,8 @@
 		reset-names = "stmmaceth";
 		phy-mode = "rmii";
 		phy-handle = <&phy>;
+		tx-fifo-depth = <2048>;
+		rx-fifo-depth = <4096>;
 		snps,txpbl = <0x4>;
 		clock_in_out = "output";
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index e47d1398a..b48b98c13 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index be06e6e64..029b8e22e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -12,6 +12,7 @@
 	compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 5753e57fd..8ac8acf40 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -8,6 +8,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &emmc;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 81d1064fd..dcee2e289 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -12,6 +12,7 @@
 	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 5589f3db6..b16b7ca02 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,r88", "rockchip,rk3368";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &emmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index a4c5aaf1f..62af0cb94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -19,7 +19,10 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
index 6464ef4d1..173da81fc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -15,6 +15,7 @@
 	compatible = "openailab,eaidk-610", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 3d1e126b5..55eca7a50 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 1ce85a581..30e4879f3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -13,6 +13,10 @@
 	model = "96boards RK3399 Ficus";
 	compatible = "vamrs,ficus", "rockchip,rk3399";
 
+	aliases {
+		ethernet0 = &gmac;
+	};
+
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c5db64f3e..260415d99 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -16,6 +16,7 @@
 	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
index 0f9cc042d..1cba1d857 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -70,7 +70,7 @@
 &spi0 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index c5e7de60c..5846a11f0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -706,7 +706,7 @@ camera: &i2c7 {
 &spi2 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index 7af27e821..4a6ab6c2e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -11,6 +11,7 @@
 	compatible = "hugsun,x99", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
index 8302e51de..99ac4ed0f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-Captain";
 	compatible = "khadas,edge-captain", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
index f5dcb99dc..e12e7b4d6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -10,6 +10,10 @@
 / {
 	model = "Khadas Edge-V";
 	compatible = "khadas,edge-v", "rockchip,rk3399";
+
+	aliases {
+		ethernet0 = &gmac;
+	};
 };
 
 &gmac {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 1eb287a3f..9e3aec444 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -19,6 +19,7 @@
 	compatible = "kobol,helios64", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 		spi1 = &spi1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index a21ac319f..cb69e2145 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -15,6 +15,7 @@
 	compatible = "leez,p710", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 7c5f441a2..b7f1e4797 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -18,6 +18,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index dba4d03bf..e7551449e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -17,6 +17,7 @@
 	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 054c6a4d1..294eb2de2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -779,7 +779,6 @@
 };
 
 &pcie0 {
-	bus-scan-delay-ms = <1000>;
 	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 115c14c0a..18a98c464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "rk3399-puma.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Theobroma Systems RK3399-Q7 SoM";
@@ -18,6 +19,38 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+		};
+
+		button-slp-btn-n {
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+		};
+
+		button-wake-n {
+			gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
 	leds {
 		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
@@ -165,11 +198,8 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&haikou_pin_hog>;
-
-	hog {
-		haikou_pin_hog: haikou-pin-hog {
+	buttons {
+		haikou_keys_pin: haikou-keys-pin {
 			rockchip,pins =
 			  /* LID_BTN */
 			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
@@ -177,7 +207,7 @@
 			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 			  /* SLP_BTN# */
 			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
-			  /* BIOS_DISABLE# */
+			  /* WAKE# */
 			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 20e3f41ef..2484ad2bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -9,6 +9,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 	};
 
@@ -119,6 +120,20 @@
 	drive-impedance-ohm = <33>;
 };
 
+&gpio0 {
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal. This usually represents the state of a switch on the baseboard.
+	 * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
+	 */
+	bios-disable-hog {
+		gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
+		gpio-hog;
+		input;
+		line-name = "bios_disable";
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -401,16 +416,22 @@
 	gpio1830-supply = <&vcc_1v8>;
 };
 
-&pmu_io_domains {
-	status = "okay";
-	pmu1830-supply = <&vcc_1v8>;
-};
-
-&pwm2 {
-	status = "okay";
+&pcie_clkreqn_cpm {
+	rockchip,pins =
+		<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&q7_thermal_pin>;
+
+	gpios {
+		q7_thermal_pin: q7-thermal-pin {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	i2c8 {
 		i2c8_xfer_a: i2c8-xfer {
 			rockchip,pins =
@@ -443,11 +464,20 @@
 	usb3 {
 		usb3_id: usb3-id {
 			rockchip,pins =
-			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };
 
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
 &sdhci {
 	/*
 	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index c32913df9..ca7a446b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -14,6 +14,7 @@
 	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
index 8bfd5f88d..7baf9d1b2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -15,6 +15,7 @@
 	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index f2279aa6c..281a12180 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index bca2b50e0..f30b82a10 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -11,6 +11,7 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdio0;
 		mmc1 = &sdmmc;
 		mmc2 = &sdhci;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index e6ac292ce..b3ef1c85e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -12,6 +12,7 @@
 	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdmmc;
 		mmc1 = &sdhci;
 	};
@@ -44,7 +45,7 @@
 	fan0: gpio-fan {
 		#cooling-cells = <2>;
 		compatible = "gpio-fan";
-		gpio-fan,speed-map = <0 0 3000 1>;
+		gpio-fan,speed-map = <0 0>, <3000 1>;
 		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 4a3d0af5e..fe818a270 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -19,7 +19,11 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &gmac;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -1360,7 +1364,6 @@
 		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_DDR_MON>;
 		clock-names = "pclk_ddr_mon";
-		status = "disabled";
 	};
 
 	vpu: video-codec@ff650000 {
@@ -1953,6 +1956,7 @@
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
+		reg-io-width = <4>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
@@ -1961,13 +1965,16 @@
 			 <&cru PLL_VPLL>;
 		clock-names = "iahb", "isfr", "cec", "grf", "ref";
 		power-domains = <&power RK3399_PD_HDCP>;
-		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
 		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1980,6 +1987,10 @@
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -2115,6 +2126,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&cru ACLK_GPU>;
 		#cooling-cells = <2>;
+		dynamic-power-coefficient = <2640>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 8b8992a8e..8823c924d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -13,6 +13,7 @@
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
 	aliases {
+		ethernet0 = &gmac;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
new file mode 100644
index 000000000..0ac64f043
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RGB30";
+	compatible = "powkiddy,rgb30", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <292500000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rgb30-panel";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc3v3_lcd0_n>;
+		iovcc-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000..ba32d0793
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-powkiddy-rk2023.dtsi"
+
+/ {
+	model = "RK2023";
+	compatible = "powkiddy,rk2023", "rockchip,rk3566";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			  <200000000>, <115200000>;
+};
+
+&dsi0 {
+	panel: panel@0 {
+		compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
new file mode 100644
index 000000000..0fa8f06f9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4250000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/*
+	 * Device also includes an always on LED that is wired to the 5V input
+	 * voltage and is on when the device is plugged in.
+	 */
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	/*
+	 * Channels reversed for speakers. Headphones automatically switch via hardware when
+	 * detected with no ability to control output in software. Headphones appear to be mono
+	 * (each output channel receives all audio). No microphone support on 3.5mm jack.
+	 */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
new file mode 100644
index 000000000..4786b19fd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts
@@ -0,0 +1,926 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Powkiddy x55";
+	compatible = "powkiddy,x55", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
+		mmc3 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc_joystick: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>,
+			      <&saradc 2>, <&saradc 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <30>;
+			abs-fuzz = <20>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4300000>;
+		factory-internal-resistance-micro-ohms = <91000>;
+		voltage-max-design-microvolt = <4138000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>,
+					<4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>,
+					<3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>,
+					<3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>,
+					<3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>,
+					<3400000 0>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-select {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "TR";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-up {
+			gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-voldown {
+			gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volup {
+			gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		red_led: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+		};
+
+		amber_led: led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_host_en>;
+		pinctrl-names = "default";
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc_lcd: regulator-vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_lcd_en>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_lcd";
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <126400000>;
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "powkiddy,x55-panel", "himax,hx8394";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_lcd>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vcc-supply = <&vcc_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		rk817_charger: charger {
+			monitored-battery = <&battery>;
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <150000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+	};
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>,
+		    <&i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-control {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+				<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hp-detect {
+		hp_det: hp-det {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins =
+				<4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-lcd {
+		vcc_lcd_en: vcc-lcd-en {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc2v8_dvp>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
+		    <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>,
+		    <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>,
+		    <&sdmmc2m1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc2v8_dvp>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 854d02b46..59843a7a1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -31,8 +31,9 @@
 	fan: gpio_fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		gpio-fan,speed-map =
+				<   0 0>,
+				<4500 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fan_en_h>;
 		#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
index 1b1c67d5b..3ae24e394 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -14,6 +14,7 @@
 	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc1 = &sdmmc0;
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
index 938092fce..63eea2729 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -12,6 +12,7 @@
 	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
index 4e49bebf5..fdbf1c783 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -13,6 +13,10 @@
 	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
 	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
 	vcc3v0_sd: vcc3v0-sd-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
index cddf6cd2f..6ed3fa4ae 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -8,6 +8,10 @@
 	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
 	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled +12v in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
index 2208dbfb7..f2095dfa4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -8,6 +8,10 @@
 	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
 	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
 
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
 	/* labeled DCIN_12V in schematic */
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
index 63bae36b8..bfb7b952f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -12,7 +12,6 @@
 	compatible = "pine64,soquartz", "rockchip,rk3566";
 
 	aliases {
-		ethernet0 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 		mmc2 = &sdmmc1;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index f9127ddfb..dc5892d25 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -416,6 +416,8 @@
 
 			vccio_sd: LDO_REG5 {
 				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 
@@ -525,9 +527,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	switch@0 {
+	switch@1f {
 		compatible = "mediatek,mt7531";
-		reg = <0>;
+		reg = <0x1f>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index e05ab1198..a5e974ea6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -15,6 +15,7 @@
 		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc2;
 	};
 
 	chosen: chosen {
@@ -747,6 +748,9 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc3v3_sys>;
 	vqmmc-supply = <&vcc_1v8>;
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index b7e2b475f..92f96ec01 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -597,6 +597,7 @@
 		compatible = "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdea0000 0x0 0x800>;
 		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "hclk";
 		iommus = <&vdpu_mmu>;
@@ -959,6 +960,13 @@
 		reg = <0x0 0xfe1a8100 0x0 0x20>;
 	};
 
+	dfi: dfi@fe230000 {
+		compatible = "rockchip,rk3568-dfi";
+		reg = <0x00 0xfe230000 0x00 0x400>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,pmu = <&pmugrf>;
+	};
+
 	pcie2x1: pcie@fe260000 {
 		compatible = "rockchip,rk3568-pcie";
 		reg = <0x3 0xc0000000 0x0 0x00400000>,
@@ -1116,7 +1124,7 @@
 		dmas = <&dmac1 4>, <&dmac1 5>;
 		dma-names = "tx", "rx";
 		resets = <&cru SRST_M_I2S2_2CH>;
-		reset-names = "m";
+		reset-names = "tx-m";
 		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m0_sclktx
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000..a4946cdc3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "RK3588 CoolPi CM5 EVB";
+	compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_pwren>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* Standard pcie */
+&pcie3x2 {
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	num-lanes = <2>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb_host1>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb_host2>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
new file mode 100644
index 000000000..94ecb9b4f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi
@@ -0,0 +1,650 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "coolpi,pi-cm5", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v75_pcie30";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* YT8531C/H */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&yt8531_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* ethernet */
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&yt6801_isolate>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt6801 {
+		yt6801_isolate: yt6801-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	yt8531 {
+		yt8531_rst: yt8531-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_2v0_pldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
index b51543892..be6a4f4f9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -12,10 +12,6 @@
 	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
index 9933765e4..070baeb63 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -9,13 +9,9 @@
 
 / {
 	model = "Edgeble Neu6B IO Board";
-	compatible = "edgeble,neural-compute-module-6b-io",
+	compatible = "edgeble,neural-compute-module-6a-io",
 		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
 
-	aliases {
-		serial2 = &uart2;
-	};
-
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 229a9111f..de30c2632 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include "rk3588.dtsi"
 
@@ -15,20 +16,149 @@
 	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
 
 	aliases {
+		ethernet0 = &gmac0;
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+
+		button-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <417000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <890000>;
+		};
+
+		button-escape {
+			label = "Escape";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1235000>;
+		};
+	};
+
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "RK3588 EVB1 Audio";
+		simple-audio-card,aux-devs = <&amp_headphone>, <&amp_speaker>;
+		simple-audio-card,bitclock-master = <&masterdai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&masterdai>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,pin-switches = "Headphones", "Speaker";
+		simple-audio-card,routing =
+			"Speaker Amplifier INL", "LOUT2",
+			"Speaker Amplifier INR", "ROUT2",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Onboard Microphone",
+			"RINPUT1", "Onboard Microphone",
+			"LINPUT2", "Microphone Jack",
+			"RINPUT2", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		masterdai: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphone: headphone-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	amp_speaker: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&speaker_amplifier_en>;
+		sound-name-prefix = "Speaker Amplifier";
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc12v_dcin>;
 		pwms = <&pwm2 0 25000 0>;
 	};
 
+	pcie20_avdd0v85: pcie20-avdd0v85-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd0v85";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&avdd_0v85_s0>;
+	};
+
+	pcie20_avdd1v8: pcie20-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie20_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	pcie30_avdd0v75: pcie30-avdd0v75-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v75";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <750000>;
+		regulator-max-microvolt = <750000>;
+		vin-supply = <&avdd_0v75_s0>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -38,6 +168,19 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie30_en>;
+	};
+
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
@@ -87,6 +230,10 @@
 	status = "okay";
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -150,6 +297,32 @@
 	};
 };
 
+&i2c7 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		AVDD-supply = <&avcc_1v8_codec_s0>;
+		DVDD-supply = <&avcc_1v8_codec_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy@1 {
 		/* RTL8211F */
@@ -163,7 +336,46 @@
 	};
 };
 
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>, <&rtl8111_isolate>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_reset>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
 &pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		speaker_amplifier_en: speaker-amplifier-en {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	rtl8211f {
 		rtl8211f_rst: rtl8211f-rst {
 			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -177,6 +389,22 @@
 		};
 	};
 
+	pcie2 {
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_reset: pcie3-reset {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_pcie30_en: vcc3v3-pcie30-en {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -188,6 +416,11 @@
 	status = "okay";
 };
 
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
@@ -215,6 +448,7 @@
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
new file mode 100644
index 000000000..39d65002a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -0,0 +1,802 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-SBC Jaguar";
+	compatible = "tsd,rk3588-jaguar", "rockchip,rk3588";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		/* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */
+		button-bios-disable {
+			label = "BIOS_DISABLE";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		rtc0 = &rtc_twi;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/* DCIN is 12-24V but standard is 12V */
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1_pin>;
+
+		/* LED1 on PCB */
+		led-1 {
+			gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v2_s3: vcc-1v2-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Exposed on P14 and P15 */
+	vcc_2v8_s3: vcc-2v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_usb_a: vcc-5v0-usb-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_a_vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+		gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_usbc2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+		gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc3v3_mdot2: vcc3v3-mdot2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_mdot2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_1v2_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_rx_bus2
+		     &gmac0_tx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &eth0_pins
+		     &eth_reset>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 100000>;
+
+	status = "okay";
+};
+
+&gpio1 {
+	mdot2e-w-disable1-n-hog {
+		gpios = <RK_PB1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE1#";
+		gpio-hog;
+	};
+};
+
+&gpio4 {
+	mdot2e-w-disable2-n-hog {
+		gpios = <RK_PC1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m.2 E-key W_DISABLE2#";
+		gpio-hog;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+	};
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1m4_xfer>;
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m4_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */
+
+	/* Also on 0x55 */
+	eeprom@54 {
+		compatible = "st,24c04", "atmel,24c04";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&vcc_3v3_s3>;
+	};
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@6 {
+		/* KSZ9031 or KSZ9131 */
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x6>;
+		clocks = <&cru REFCLKO25M_ETH0_OUT>;
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */
+	vpcie3v3-supply = <&vcc3v3_mdot2>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_reset: eth-reset {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1_pin: led1-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
+	supports-cqe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-name = "vcca_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-name = "vdda_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-name = "vcca_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg3 {
+				regulator-name = "vdda_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-name = "vdda_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc_5v0_usb_a>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+/* Mule-ATtiny debug UART; typically baudrate 9600 */
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+/* Main debug interface on P20 micro-USB B port and P21 header */
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS485 on P19 */
+&uart3 {
+	pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* Mule-ATtiny UPDI flashing UART */
+&uart7 {
+	pinctrl-0 = <&uart7m0_xfer>;
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+/* host0 on P10 USB-A */
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+/* host1 on M.2 E-key */
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
index 97af4f912..997b516c2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -19,7 +19,6 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -190,19 +189,19 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
-&cpu_b0{
+&cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b1{
+&cpu_b1 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
 
-&cpu_b2{
+&cpu_b2 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
-&cpu_b3{
+&cpu_b3 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
@@ -537,13 +536,12 @@
 };
 
 &sdmmc {
-	max-frequency = <200000000>;
-	no-sdio;
-	no-mmc;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	disable-wp;
+	no-mmc;
+	no-sdio;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vccio_sd_s0>;
@@ -570,6 +568,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc4v0_sys>;
 		vcc2-supply = <&vcc4v0_sys>;
 		vcc3-supply = <&vcc4v0_sys>;
@@ -590,7 +590,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
new file mode 100644
index 000000000..e74871491
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -0,0 +1,848 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5 Plus";
+	compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Mask Rom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <2000>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <2000>;
+		};
+	};
+
+	speaker_amp: speaker-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	headphone_amp: headphones-audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Amp";
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin>;
+
+		led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 70 75 80 100>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm3 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			max-brightness = <255>;
+			pwms = <&pwm2 0 25000 0>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "Analog";
+		simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+		simple-audio-card,bitclock-master = <&daicpu>;
+		simple-audio-card,frame-master = <&daicpu>;
+		/*TODO: SARADC_IN3 is used as MIC detection / key input */
+
+		simple-audio-card,widgets =
+			"Microphone", "Onboard Microphone",
+			"Microphone", "Microphone Jack",
+			"Speaker", "Speaker",
+			"Headphone", "Headphones";
+
+		simple-audio-card,routing =
+			"Headphones", "LOUT1",
+			"Headphones", "ROUT1",
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+
+			"Headphones", "Headphones Amp OUTL",
+			"Headphones", "Headphones Amp OUTR",
+			"Headphones Amp INL", "LOUT1",
+			"Headphones Amp INR", "ROUT1",
+
+			"Speaker", "Speaker Amp OUTL",
+			"Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LOUT2",
+			"Speaker Amp INR", "ROUT2",
+
+			/* single ended signal to LINPUT1 */
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			/* differential signal */
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+
+		daicpu: simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+			system-clock-frequency = <12288000>;
+		};
+
+		daicodec: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator {
+		compatible = "regulator-fixed";
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		regulator-name = "vcc3v3_pcie_eth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_wf: vcc3v3-wf-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_wf";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb20: vcc5v0-usb20-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_en>;
+		regulator-name = "vcc5v0_usb20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		AVDD-supply = <&vcc_1v8_s0>;
+		DVDD-supply = <&vcc_1v8_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&i2s2_2ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s2m0_lrck
+		     &i2s2m0_sclk
+		     &i2s2m0_sdi
+		     &i2s2m0_sdo>;
+	status = "okay";
+};
+
+/* phy1 - M.KEY socket */
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wf>;
+	status = "okay";
+};
+
+/* phy2 - right ethernet port */
+&pcie2x1l1 {
+	reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
+	status = "okay";
+};
+
+/* phy0 - left ethernet port */
+&pcie2x1l2 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_eth>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		blue_led_pin: blue-led {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_en: vcc5v0-usb20-en {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim1_pins>;
+	status = "okay";
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vdd2_ddr_s3>;
+		vcc14-supply = <&vdd2_ddr_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <825000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <825000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* shorted to avcc_1v8_s0 on the board */
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				/*
+				 * The schematic mentions that actual setting
+				 * should be 0.8375V. RK3588 datasheet specifies
+				 * maximum as 0.825V. So we set datasheet max
+				 * here.
+				 */
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <825000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb20>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart9 {
+	pinctrl-0 = <&uart9m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
new file mode 100644
index 000000000..87a0abf95
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -0,0 +1,1137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "PINE64 QuartzPro64";
+	compatible = "pine64,quartzpro64", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "Mask Rom";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <393>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-volume-up {
+			label = "V+/REC";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17821>;
+		};
+
+		button-volume-down {
+			label = "V-";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <415384>;
+		};
+
+		button-menu {
+			label = "MENU";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <890909>;
+		};
+
+		button-esc {
+			label = "ESC";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1233962>;
+		};
+	};
+
+	headphone_amp: audio-amplifier-headphone {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Amp";
+	};
+
+	speaker_amp: audio-amplifier-speaker {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-1 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+		simple-audio-card,name = "Analog";
+		simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,bitclock-master = <&daicpu>;
+		simple-audio-card,frame-master = <&daicpu>;
+		/* SARADC_IN3 is used as MIC detection / key input */
+
+		simple-audio-card,widgets =
+			"Microphone", "Onboard Microphone",
+			"Microphone", "Microphone Jack",
+			"Speaker", "Speaker",
+			"Headphone", "Headphones";
+
+		simple-audio-card,routing =
+			"Headphones", "LOUT1",
+			"Headphones", "ROUT1",
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+
+			"Headphones", "Headphones Amp OUTL",
+			"Headphones", "Headphones Amp OUTR",
+			"Headphones Amp INL", "LOUT1",
+			"Headphones Amp INR", "ROUT1",
+
+			"Speaker", "Speaker Amp OUTL",
+			"Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LOUT2",
+			"Speaker Amp INR", "ROUT2",
+
+			/* single ended signal to LINPUT1 */
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			/* differential signal */
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+
+		daicpu: simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+			system-clock-frequency = <12288000>;
+		};
+
+		daicodec: simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_bt: vcc3v3-bt-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_bt";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc_3v3_s0>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_wf: vcc3v3-wf-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_wf";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc_3v3_s0>;
+	};
+
+	vcc4v0_sys: vcc4v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		AVDD-supply = <&avcc_1v8_codec_s0>;
+		DVDD-supply = <&avcc_1v8_codec_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_pins: led-pins {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* WIFI */
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wf>;
+	status = "okay";
+};
+
+/* GMAC1 */
+&pcie2x1l1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <150000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <2>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc4v0_sys>;
+		vcc2-supply = <&vcc4v0_sys>;
+		vcc3-supply = <&vcc4v0_sys>;
+		vcc4-supply = <&vcc4v0_sys>;
+		vcc5-supply = <&vcc4v0_sys>;
+		vcc6-supply = <&vcc4v0_sys>;
+		vcc7-supply = <&vcc4v0_sys>;
+		vcc8-supply = <&vcc4v0_sys>;
+		vcc9-supply = <&vcc4v0_sys>;
+		vcc10-supply = <&vcc4v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc4v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc4v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-name = "vdd_npu_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_gpu_mem_s0: dcdc-reg5 {
+				regulator-name = "vdd_gpu_mem_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_npu_mem_s0: dcdc-reg6 {
+				regulator-name = "vdd_npu_mem_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vdd_vdenc_mem_s0: dcdc-reg8 {
+				regulator-name = "vdd_vdenc_mem_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v1_nldo_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v1_nldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1_1v8_ddr_s3: pldo-reg2 {
+				regulator-name = "vdd1_1v8_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_codec_s0: pldo-reg3 {
+				regulator-name = "avcc_1v8_codec_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: pldo-reg4 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: pldo-reg6 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			/* reserved for LPDDR5, unused? */
+			vdd2l_0v9_ddr_s3: nldo-reg2 {
+				regulator-name = "vdd2l_0v9_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_0v75_hdmi_edp_s0: nldo-reg3 {
+				regulator-name = "vdd_0v75_hdmi_edp_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg4 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg5 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pmic@1 {
+		compatible = "rockchip,rk806";
+		reg = <0x01>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
+			    <&rk806_slave_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc4v0_sys>;
+		vcc2-supply = <&vcc4v0_sys>;
+		vcc3-supply = <&vcc4v0_sys>;
+		vcc4-supply = <&vcc4v0_sys>;
+		vcc5-supply = <&vcc4v0_sys>;
+		vcc6-supply = <&vcc4v0_sys>;
+		vcc7-supply = <&vcc4v0_sys>;
+		vcc8-supply = <&vcc4v0_sys>;
+		vcc9-supply = <&vcc4v0_sys>;
+		vcc10-supply = <&vcc4v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc4v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc4v0_sys>;
+
+		rk806_slave_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big1_s0: dcdc-reg1 {
+				regulator-name = "vdd_cpu_big1_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big0_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_big0_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: dcdc-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big1_mem_s0: dcdc-reg5 {
+				regulator-name = "vdd_cpu_big1_mem_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+
+			vdd_cpu_big0_mem_s0: dcdc-reg6 {
+				regulator-name = "vdd_cpu_big0_mem_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: dcdc-reg7 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_mem_s0: dcdc-reg8 {
+				regulator-name = "vdd_cpu_lit_mem_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* reserved, unused? */
+			vcc_1v8_cam_s0: pldo-reg1 {
+				regulator-name = "vcc_1v8_cam_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd1v8_ddr_pll_s0: pldo-reg2 {
+				regulator-name = "avdd1v8_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_1v8_pll_s0: pldo-reg3 {
+				regulator-name = "vdd_1v8_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* reserved, unused? */
+			vcc_3v3_sd_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* reserved, unused? */
+			vcc_2v8_cam_s0: pldo-reg5 {
+				regulator-name = "vcc_2v8_cam_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* unused */
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_pll_s0: nldo-reg1 {
+				regulator-name = "vdd_0v75_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg3 {
+				regulator-name = "avdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* reserved, unused */
+			avdd_1v2_cam_s0: nldo-reg4 {
+				regulator-name = "avdd_1v2_cam_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_s0: nldo-reg5 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 8ab60968f..a0e303c3a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include "rk3588.dtsi"
 
 / {
@@ -12,7 +13,7 @@
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
+		mmc2 = &sdio;
 	};
 
 	chosen {
@@ -36,6 +37,19 @@
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_rgb_b>;
+
+		led_rgb_b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	fan: pwm-fan {
 		compatible = "pwm-fan";
 		cooling-levels = <0 95 145 195 255>;
@@ -44,6 +58,43 @@
 		#cooling-cells = <2>;
 	};
 
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie2_0_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l2: vcc3v3-pcie2x1l2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie2x1l2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie3_vcc3v3_en>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_host";
@@ -78,6 +129,18 @@
 	};
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -204,6 +267,34 @@
 	};
 };
 
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_rst>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -211,12 +302,42 @@
 		};
 	};
 
+	leds {
+		led_rgb_b: led-rgb-b {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sound {
 		hp_detect: hp-detect {
 			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_rst: pcie3-rst {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -258,6 +379,33 @@
 	status = "okay";
 };
 
+&sdio {
+	max-frequency = <200000000>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	wakeup-source;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_pcie2x1l0>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom0_pins>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
+	status = "okay";
+};
+
 &spi2 {
 	status = "okay";
 	assigned-clocks = <&cru CLK_SPI2>;
@@ -278,6 +426,8 @@
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
 
+		system-power-controller;
+
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;
 		vcc3-supply = <&vcc5v0_sys>;
@@ -298,7 +448,7 @@
 		#gpio-cells = <2>;
 
 		rk806_dvs1_null: dvs1-null-pins {
-			pins = "gpio_pwrctrl2";
+			pins = "gpio_pwrctrl1";
 			function = "pin_fun0";
 		};
 
@@ -620,3 +770,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts
new file mode 100644
index 000000000..7bcad28d7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * This device tree covers the common case where the RK1 is used as a
+ * "compute node" system, where the carrier board is functioning more like a
+ * generic backplane (with no non-autoenumerable peripherals of its own) than
+ * like a device that the SoM is meant to enable.
+ *
+ * Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3588-turing-rk1.dtsi"
+
+/ {
+	model = "Turing Machines RK1";
+	compatible = "turing,rk1", "rockchip,rk3588";
+
+	chosen {
+		stdout-path = "serial9:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
new file mode 100644
index 000000000..dc08da518
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree definitions for the Turing RK1 SoM.
+ *
+ * Copyright (c) 2023 Sam Edwards <CFSworks@gmail.com>
+ *
+ * Based on RK3588-EVB1 devicetree
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	compatible = "turing,rk1", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 25 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0m2_pins &fan_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+		pwms = <&pwm0 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie30_en>;
+		startup-delay-us = <5000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <15000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l1 {
+	linux,pci-domain = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_reset>;
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	linux,pci-domain = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_reset>;
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	fan {
+		fan_int: fan-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie2 {
+		pcie2_reset: pcie2-reset {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie3 {
+		pcie3_reset: pcie3-reset {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_pcie30_en: pcie3-reg {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&uart9 {
+	pinctrl-0 = <&uart9m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 000000000..e037bf9db
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,812 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "RK3588S CoolPi 4 Model B";
+	compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_8ch_p0>;
+		label = "rk3588-es8316";
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led0: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-red {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd0v85_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <850000>;
+		vin-supply = <&vdd_0v85_s0>;
+	};
+
+	avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd1v8_pcie20";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&avcc_1v8_s0>;
+	};
+
+	vcc3v3_mipi: vcc3v3-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_mipi";
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_u3host_en>;
+		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtl8111_isolate>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	led {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rtl8111 {
+		rtl8111_isolate: rtl8111-isolate {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vcc5v0_u3host_en: vcc5v0-u3host-en {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_reset_gpio: bt-reset-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-wlan {
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		wifi_poweren_pin: wifi-poweren-pin {
+			rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	status = "okay";
+};
+
+&pwm13 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm13m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* bt */
+&uart9 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index d1503a4b2..3c2278886 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588s.dtsi"
@@ -11,11 +12,38 @@
 	model = "Indiedroid Nova";
 	compatible = "indiedroid,nova", "rockchip,rk3588s";
 
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 0>;
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-boot {
+			label = "boot";
+			linux,code = <KEY_PROG1>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 1>;
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_PROG2>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
 	aliases {
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
 		mmc2 = &sdio;
-		serial2 = &uart2;
 	};
 
 	chosen {
@@ -109,6 +137,10 @@
 	};
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
 &cpu_l0 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
@@ -163,13 +195,13 @@
 
 &gpio1 {
 	gpio-line-names = /* GPIO1 A0-A7 */
-			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_27_3v3", "", "", "",
 			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
 			  /* GPIO1 B0-B7 */
 			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
 			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
 			  /* GPIO1 C0-C7 */
-			  "", "", "", "",
+			  "", "HEADER_28_3v3", "", "",
 			  "", "", "", "",
 			  /* GPIO1 D0-D7 */
 			  "", "", "", "",
@@ -193,11 +225,11 @@
 
 &gpio4 {
 	gpio-line-names = /* GPIO4 A0-A7 */
-			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
-			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  "", "", "HEADER_37_3v3", "HEADER_8_3v3",
+			  "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3",
 			  /* GPIO4 B0-B7 */
 			  "", "", "", "HEADER_40_3v3",
-			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  "HEADER_38_3v3", "HEADER_36_3v3", "", "",
 			  /* GPIO4 C0-C7 */
 			  "", "", "", "",
 			  "", "", "", "",
@@ -348,6 +380,12 @@
 	};
 };
 
+&pcie2x1l2 {
+	pinctrl-0 = <&rtl8111_perstb>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &pinctrl {
 	bluetooth-pins {
 		bt_reset: bt-reset {
@@ -366,6 +404,12 @@
 		};
 	};
 
+	ethernet-pins {
+		rtl8111_perstb: rtl8111-perstb {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	hym8563 {
 
 		hym8563_int: hym8563-int {
@@ -394,6 +438,11 @@
 	};
 };
 
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
 /* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;
@@ -735,6 +784,24 @@
 	status = "okay";
 };
 
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
 &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
@@ -759,3 +826,19 @@
 		pinctrl-names = "default";
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index 82478a452..f53e993c7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -12,7 +12,6 @@
 
 	aliases {
 		mmc0 = &sdhci;
-		serial2 = &uart2;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
new file mode 100644
index 000000000..25de4362a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi 5";
+	compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1800>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_gpio>;
+
+		led-1 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "status_led";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-low;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+		regulator-name = "vcc_3v3_sd_s0";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_pcie20";
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	tx_delay = <0x42>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie20>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-func {
+		leds_gpio: leds-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim0_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+				<&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vcc_1v1_nldo_s3: vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
index 0933652ba..30db12c4f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
@@ -1350,6 +1350,41 @@
 
 	i2s2 {
 		/omit-if-no-ref/
+		i2s2m0_lrck: i2s2m0-lrck {
+			rockchip,pins =
+				/* i2s2m0_lrck */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2m0_mclk */
+				<2 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclk: i2s2m0-sclk {
+			rockchip,pins =
+				/* i2s2m0_sclk */
+				<2 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2m0_sdi */
+				<2 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2m0_sdo */
+				<4 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
 		i2s2m1_lrck: i2s2m1-lrck {
 			rockchip,pins =
 				/* i2s2m1_lrck */
@@ -3308,6 +3343,15 @@
 
 	uart9 {
 		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rx_m0 */
+				<2 RK_PC4 10 &pcfg_pull_up>,
+				/* uart9_tx_m0 */
+				<2 RK_PC2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
 		uart9m1_xfer: uart9m1-xfer {
 			rockchip,pins =
 				/* uart9_rx_m1 */
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 8347adcbd..2002fd022 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -12,9 +12,9 @@
 	compatible = "radxa,rock-5a", "rockchip,rk3588s";
 
 	aliases {
+		ethernet0 = &gmac1;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
-		serial2 = &uart2;
 	};
 
 	analog-sound {
@@ -114,6 +114,10 @@
 	};
 };
 
+&combphy2_psu {
+	status = "okay";
+};
+
 &cpu_b0 {
 	cpu-supply = <&vdd_cpu_big0_s0>;
 };
@@ -734,3 +738,7 @@
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&usb_host2_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 4aa516ff1..82350ddb2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -18,6 +18,38 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -362,6 +394,11 @@
 		#clock-cells = <0>;
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -443,11 +480,47 @@
 		status = "disabled";
 	};
 
+	usb_host2_xhci: usb@fcd00000 {
+		compatible = "rockchip,rk3588-dwc3", "snps,dwc3";
+		reg = <0x0 0xfcd00000 0x0 0x400000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru REF_CLK_USB3OTG2>, <&cru SUSPEND_CLK_USB3OTG2>,
+			 <&cru ACLK_USB3OTG2>, <&cru CLK_UTMI_OTG2>,
+			 <&cru CLK_PIPEPHY2_PIPE_U3_G>;
+		clock-names = "ref_clk", "suspend_clk", "bus_clk", "utmi", "pipe";
+		dr_mode = "host";
+		phys = <&combphy2_psu PHY_TYPE_USB3>;
+		phy-names = "usb3-phy";
+		phy_type = "utmi_wide";
+		resets = <&cru SRST_A_USB3OTG2>;
+		snps,dis_enblslpm_quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		snps,dis_rxdet_inp3_quirk;
+		status = "disabled";
+	};
+
+	pmu1grf: syscon@fd58a000 {
+		compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd58a000 0x0 0x10000>;
+	};
+
 	sys_grf: syscon@fd58c000 {
 		compatible = "rockchip,rk3588-sys-grf", "syscon";
 		reg = <0x0 0xfd58c000 0x0 0x1000>;
 	};
 
+	vop_grf: syscon@fd5a4000 {
+		compatible = "rockchip,rk3588-vop-grf", "syscon";
+		reg = <0x0 0xfd5a4000 0x0 0x2000>;
+	};
+
+	vo1_grf: syscon@fd5a8000 {
+		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x100>;
+	};
+
 	php_grf: syscon@fd5b0000 {
 		compatible = "rockchip,rk3588-php-grf", "syscon";
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
@@ -567,6 +640,74 @@
 		status = "disabled";
 	};
 
+	vop: vop@fdd90000 {
+		compatible = "rockchip,rk3588-vop";
+		reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>,
+			 <&cru HCLK_VOP>,
+			 <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>,
+			 <&cru DCLK_VOP2>,
+			 <&cru DCLK_VOP3>,
+			 <&cru PCLK_VOP_ROOT>;
+		clock-names = "aclk",
+			      "hclk",
+			      "dclk_vp0",
+			      "dclk_vp1",
+			      "dclk_vp2",
+			      "dclk_vp3",
+			      "pclk_vop";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3588_PD_VOP>;
+		rockchip,grf = <&sys_grf>;
+		rockchip,vop-grf = <&vop_grf>;
+		rockchip,vo1-grf = <&vo1_grf>;
+		rockchip,pmu = <&pmu>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+			};
+
+			vp1: port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+			};
+
+			vp2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+			};
+
+			vp3: port@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fdd97e00 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_VOP>;
+		status = "disabled";
+	};
+
 	uart0: serial@fd890000 {
 		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xfd890000 0x0 0x100>;
@@ -1330,6 +1471,16 @@
 		};
 	};
 
+	dfi: dfi@fe060000 {
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		compatible = "rockchip,rk3588-dfi";
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		rockchip,pmu = <&pmu1grf>;
+	};
+
 	gmac1: ethernet@fe1c0000 {
 		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
 		reg = <0x0 0xfe1c0000 0x0 0x10000>;
@@ -1425,6 +1576,17 @@
 		};
 	};
 
+	sfc: spi@fe2b0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xfe2b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sdmmc: mmc@fe2c0000 {
 		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe2c0000 0x0 0x4000>;
@@ -1542,7 +1704,6 @@
 		dmas = <&dmac1 0>, <&dmac1 1>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2m1_lrck
 			     &i2s2m1_sclk
@@ -1563,7 +1724,6 @@
 		dmas = <&dmac1 2>, <&dmac1 3>;
 		dma-names = "tx", "rx";
 		power-domains = <&power RK3588_PD_AUDIO>;
-		rockchip,trcm-sync-tx-only;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s3_lrck
 			     &i2s3_sclk
@@ -2305,6 +2465,19 @@
 			#interrupt-cells = <2>;
 		};
 	};
+
+	av1d: video-codec@fdc70000 {
+		compatible = "rockchip,rk3588-av1-vpu";
+		reg = <0x0 0xfdc70000 0x0 0x800>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vdpu";
+		assigned-clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+		assigned-clock-rates = <400000000>, <400000000>;
+		clocks = <&cru ACLK_AV1>, <&cru PCLK_AV1>;
+		clock-names = "aclk", "hclk";
+		power-domains = <&power RK3588_PD_AV1>;
+		resets = <&cru SRST_A_AV1>, <&cru SRST_P_AV1>, <&cru SRST_A_AV1_BIU>, <&cru SRST_P_AV1_BIU>;
+	};
 };
 
 #include "rk3588s-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 7bb36b071..4680571c2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -52,6 +52,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 4e2171630..335093da6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -86,10 +86,14 @@
 
 		a72_l2: l2-cache0 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		a53_l2: l2-cache1 {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 38ccfb46e..d6e3cc6fd 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -83,6 +83,8 @@
 
 		l2: l2-cache {
 			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 97522fb0b..3ce81ad71 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -2,4 +2,5 @@
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb	\
 			sp9863a-1h10.dtb	\
-			ums512-1h10.dtb
+			ums512-1h10.dtb		\
+			ums9620-2h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
index 97ac550af..dbdb79f8e 100644
--- a/arch/arm64/boot/dts/sprd/ums512.dtsi
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -113,7 +113,7 @@
 
 	idle-states {
 		entry-method = "psci";
-		CORE_PD: core-pd {
+		CORE_PD: cpu-pd {
 			compatible = "arm,idle-state";
 			entry-latency-us = <4000>;
 			exit-latency-us = <4000>;
@@ -291,6 +291,7 @@
 			pll2: clock-controller@0 {
 				compatible = "sprd,ums512-gc-pll";
 				reg = <0x0 0x100>;
+				clocks = <&ext_26m>;
 				clock-names = "ext-26m";
 				#clock-cells = <1>;
 			};
@@ -682,8 +683,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f040000 0 0x1000>;
 			cpu = <&CPU0>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -699,8 +700,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f140000 0 0x1000>;
 			cpu = <&CPU1>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -716,8 +717,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f240000 0 0x1000>;
 			cpu = <&CPU2>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -733,8 +734,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f340000 0 0x1000>;
 			cpu = <&CPU3>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -750,8 +751,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f440000 0 0x1000>;
 			cpu = <&CPU4>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -767,8 +768,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f540000 0 0x1000>;
 			cpu = <&CPU5>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -784,8 +785,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f640000 0 0x1000>;
 			cpu = <&CPU6>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
@@ -801,8 +802,8 @@
 			compatible = "arm,coresight-etm4x", "arm,primecell";
 			reg = <0 0x3f740000 0 0x1000>;
 			cpu = <&CPU7>;
-			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
-			clock-names = "apb_pclk", "clk_cs", "cs_src";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
 
 			out-ports {
 				port {
diff --git a/arch/arm64/boot/dts/sprd/ums9620-2h10.dts b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
new file mode 100644
index 000000000..b35671192
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620-2h10 board DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums9620.dtsi"
+
+/ {
+	model = "Unisoc UMS9620-2H10 Board";
+
+	compatible = "sprd,ums9620-2h10", "sprd,ums9620";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/ums9620.dtsi b/arch/arm64/boot/dts/sprd/ums9620.dtsi
new file mode 100644
index 000000000..2191f0a48
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums9620.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS9620 DTS file
+ *
+ * Copyright (C) 2023, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&LIT_CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		LIT_CORE_PD: cpu-pd-lit {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <500>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+
+		BIG_CORE_PD: cpu-pd-big {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb@20200000 {
+			compatible = "simple-bus";
+			ranges = <0 0 0x20200000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@10000 {
+				compatible = "sprd,ums9620-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x10000 0x100>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+
+	dphy_312m5: dphy-312m5 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <312500000>;
+		clock-output-names = "dphy-312m5";
+	};
+
+	dphy_416m7: dphy-416m7 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <416700000>;
+		clock-output-names = "dphy-416m7";
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index d34a1d5e7..66791a974 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,60 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, AF10)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, AF10)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, AF10)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, AF10)>; /* SDMMC1_D3 */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('E', 2, AF10)>; /* SDMMC1_CMD */
+			slew-rate = <2>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 4, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('E', 0, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('E', 1, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('E', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 5268a4321..96859d098 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -28,6 +28,12 @@
 		interrupt-parent = <&intc>;
 	};
 
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xb200005a>;
+		status = "disabled";
+	};
+
 	clocks {
 		ck_flexgen_08: ck-flexgen-08 {
 			#clock-cells = <0>;
@@ -119,6 +125,35 @@
 				clocks = <&ck_flexgen_08>;
 				status = "disabled";
 			};
+
+			sdmmc1: mmc@48220000 {
+				compatible = "st,stm32mp25-sdmmc2", "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00353180>;
+				reg = <0x48220000 0x400>, <0x44230400 0x8>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_51>;
+				clock-names = "apb_pclk";
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <120000000>;
+				status = "disabled";
+			};
+		};
+
+		bsec: efuse@44000000 {
+			compatible = "st,stm32mp25-bsec";
+			reg = <0x44000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp@24 {
+				reg = <0x24 0x4>;
+			};
+
+			package_otp@1e8 {
+				reg = <0x1e8 0x1>;
+				bits = <0 3>;
+			};
 		};
 
 		syscfg: syscon@44230000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 39b4726cc..b2d3afb15 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "stm32mp257.dtsi"
 #include "stm32mp25xf.dtsi"
 #include "stm32mp25-pinctrl.dtsi"
@@ -39,6 +40,32 @@
 			no-map;
 		};
 	};
+
+	vdd_sdcard: vdd-sdcard {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sdcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiod 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sdcard>;
+	status = "okay";
 };
 
 &usart2 {
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index bb50a9f7d..aaffb50b8 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -342,6 +342,18 @@
 		#clock-cells = <0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mfc_left: region@84000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0 0x84000000 0 0x8000000>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -581,7 +593,7 @@
 		};
 
 		serial_0: serial@14180000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14180000 0x0 0x100>;
 			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 1>, <&pdma1 0>;
@@ -593,7 +605,7 @@
 		};
 
 		serial_1: serial@14190000 {
-			compatible = "samsung,exynos4210-uart";
+			compatible = "tesla,fsd-uart", "samsung,exynos4210-uart";
 			reg = <0x0 0x14190000 0x0 0x100>;
 			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 3>, <&pdma1 2>;
@@ -605,12 +617,12 @@
 		};
 
 		pmu_system_controller: system-controller@11400000 {
-			compatible = "samsung,exynos7-pmu", "syscon";
+			compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon";
 			reg = <0x0 0x11400000 0x0 0x5000>;
 		};
 
 		watchdog_0: watchdog@100a0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100a0000 0x0 0x100>;
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -619,7 +631,7 @@
 		};
 
 		watchdog_1: watchdog@100b0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100b0000 0x0 0x100>;
 			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -628,7 +640,7 @@
 		};
 
 		watchdog_2: watchdog@100c0000 {
-			compatible = "samsung,exynos7-wdt";
+			compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt";
 			reg = <0x0 0x100c0000 0x0 0x100>;
 			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,syscon-phandle = <&pmu_system_controller>;
@@ -637,7 +649,7 @@
 		};
 
 		pwm_0: pwm@14100000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14100000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -647,7 +659,7 @@
 		};
 
 		pwm_1: pwm@14110000 {
-			compatible = "samsung,exynos4210-pwm";
+			compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm";
 			reg = <0x0 0x14110000 0x0 0x100>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
@@ -657,7 +669,7 @@
 		};
 
 		hsi2c_0: i2c@14200000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14200000 0x0 0x1000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -670,7 +682,7 @@
 		};
 
 		hsi2c_1: i2c@14210000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14210000 0x0 0x1000>;
 			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -683,7 +695,7 @@
 		};
 
 		hsi2c_2: i2c@14220000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14220000 0x0 0x1000>;
 			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -696,7 +708,7 @@
 		};
 
 		hsi2c_3: i2c@14230000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14230000 0x0 0x1000>;
 			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -709,7 +721,7 @@
 		};
 
 		hsi2c_4: i2c@14240000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14240000 0x0 0x1000>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -722,7 +734,7 @@
 		};
 
 		hsi2c_5: i2c@14250000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14250000 0x0 0x1000>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -735,7 +747,7 @@
 		};
 
 		hsi2c_6: i2c@14260000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14260000 0x0 0x1000>;
 			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -748,7 +760,7 @@
 		};
 
 		hsi2c_7: i2c@14270000 {
-			compatible = "samsung,exynos7-hsi2c";
+			compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c";
 			reg = <0x0 0x14270000 0x0 0x1000>;
 			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -956,6 +968,15 @@
 			clock-names = "fin_pll", "mct";
 		};
 
+		mfc: mfc@12880000 {
+			compatible = "tesla,fsd-mfc";
+			reg = <0x0 0x12880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "mfc";
+			clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>;
+			memory-region = <&mfc_left>;
+		};
+
 		ufs: ufs@15120000 {
 			compatible = "tesla,fsd-ufs";
 			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8bd5acc6d..08ce34d21 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -9,20 +9,20 @@
 # alphabetically.
 
 # Boards with AM62x SoC
-k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
-k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -30,22 +30,24 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
 
+# Common overlays for SK-AM62* family of boards
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
+
 # Boards with AM64x SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
-
-k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
-k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
-	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
-
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
-dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
 
 # Boards with AM65x SoC
 k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+k3-am654-evm-dtbs := k3-am654-base-board.dtb k3-am654-icssg2.dtbo
+k3-am654-idk-dtbs := k3-am654-evm.dtb k3-am654-idk.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
@@ -53,6 +55,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board-rocktech-rk101-panel.dtbo
 
 # Boards with J7200 SoC
 k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
@@ -63,6 +68,7 @@ k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-e
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 
 # Boards with J721s2 SoC
@@ -71,14 +77,59 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
 
 # Boards with J784s4 SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
 
+# Build time test only, enabled by CONFIG_OF_ALL_DTBS
+k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-ov5640.dtbo
+k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-imx219.dtbo
+k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-ov5640.dtbo
+k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \
+	k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-evm-pcie0-ep.dtbo
+k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-pcie1-ep.dtbo
+dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
+	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-csi2-imx219.dtb \
+	k3-am625-sk-csi2-ov5640.dtb \
+	k3-am625-sk-csi2-tevi-ov5640.dtb \
+	k3-am625-sk-hdmi-audio.dtb \
+	k3-am62-lp-sk-hdmi-audio.dtb \
+	k3-am62a7-sk-csi2-imx219.dtb \
+	k3-am62a7-sk-csi2-ov5640.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
+	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
+	k3-j721e-evm-pcie0-ep.dtb \
+	k3-j721s2-evm-pcie1-ep.dtb
+
 # Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-beagleplay += -@
 DTC_FLAGS_k3-am625-sk += -@
 DTC_FLAGS_k3-am62-lp-sk += -@
+DTC_FLAGS_k3-am62a7-sk += -@
+DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
 DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
 DTC_FLAGS_k3-j721e-common-proc-board += -@
 DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 284b90c94..6d07b65a3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -81,7 +81,8 @@
 	};
 
 	dmss: bus@48000000 {
-		compatible = "simple-mfd";
+		bootph-all;
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
@@ -90,6 +91,7 @@
 		ti,sci-dev-id = <25>;
 
 		secure_proxy_main: mailbox@4d000000 {
+			bootph-all;
 			compatible = "ti,am654-secure-proxy";
 			#mbox-cells = <1>;
 			reg-names = "target_data", "rt", "scfg";
@@ -119,8 +121,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -136,8 +143,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -165,6 +177,7 @@
 	};
 
 	dmsc: system-controller@44043000 {
+		bootph-all;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
@@ -174,16 +187,19 @@
 		reg = <0x00 0x44043000 0x00 0xfe0>;
 
 		k3_pds: power-controller {
+			bootph-all;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clock-controller {
+			bootph-all;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
 
 		k3_reset: reset-controller {
+			bootph-all;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
 		};
@@ -202,6 +218,7 @@
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
+		bootph-pre-ram;
 		compatible = "ti,am654-secure-proxy";
 		#mbox-cells = <1>;
 		reg-names = "target_data", "rt", "scfg";
@@ -217,6 +234,7 @@
 	};
 
 	main_pmx0: pinctrl@f4000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2ac>;
 		#pinctrl-cells = <1>;
@@ -225,12 +243,14 @@
 	};
 
 	main_esm: esm@420000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x420000 0x00 0x1000>;
 		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
 	};
 
 	main_timer0: timer@2400000 {
+		bootph-all;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x2400000 0x00 0x400>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -492,6 +512,9 @@
 	main_gpio0: gpio@600000 {
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-ranges = <&main_pmx0  0  0 32>,
+			      <&main_pmx0 32 33 38>,
+			      <&main_pmx0 70 72 22>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
@@ -510,6 +533,10 @@
 		compatible = "ti,am64-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x00601000 0x0 0x100>;
 		gpio-controller;
+		gpio-ranges = <&main_pmx0  0  94 41>,
+			      <&main_pmx0 41 136  6>,
+			      <&main_pmx0 47 143  3>,
+			      <&main_pmx0 50 149  2>;
 		#gpio-cells = <2>;
 		interrupt-parent = <&main_gpio_intr>;
 		interrupts = <180>, <181>, <182>,
@@ -613,6 +640,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -636,6 +665,8 @@
 			interrupt-names = "host", "peripheral";
 			maximum-speed = "high-speed";
 			dr_mode = "otg";
+			snps,usb2-gadget-lpm-disable;
+			snps,usb2-lpm-disable;
 		};
 	};
 
@@ -665,6 +696,15 @@
 		};
 	};
 
+	gpu: gpu@fd00000 {
+		compatible = "ti,am62-gpu", "img,img-axe";
+		reg = <0x00 0x0fd00000 0x00 0x20000>;
+		clocks = <&k3_clks 187 0>;
+		clock-names = "core";
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
 	cpsw3g: ethernet@8000000 {
 		compatible = "ti,am642-cpsw-nuss";
 		#address-cells = <2>;
@@ -743,9 +783,10 @@
 		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
 		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
 		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
-		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		      <0x00 0x3020b000 0x00 0x1000>, /* vp2: Used as DPI Out */
+		      <0x00 0x30201000 0x00 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			    "ovr1", "ovr2", "vp1", "vp2";
+			    "ovr1", "ovr2", "vp1", "vp2", "common1";
 		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 186 6>,
 			 <&dss_vp1_clk>,
@@ -955,4 +996,66 @@
 		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
 		status = "disabled";
 	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma 0 0x4700 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index 80a3e1db2..0e0b23458 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -7,6 +7,7 @@
 
 &cbass_mcu {
 	mcu_pmx0: pinctrl@4084000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0x04084000 0x00 0x88>;
 		#pinctrl-cells = <1>;
@@ -15,6 +16,7 @@
 	};
 
 	mcu_esm: esm@4100000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x4100000 0x00 0x1000>;
 		ti,esm-pins = <0>, <1>, <2>, <85>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index 013357d17..bf6d27e70 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -214,6 +214,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
index 6701cb897..680071688 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -235,6 +235,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
new file mode 100644
index 000000000..17b93534f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Mallow carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>;
+
+		/* SODIMM 52 - USER_LED_1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 54 - USER_LED_1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 56 - USER_LED_2_RED */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* SODIMM 58 - USER_LED_2_GREEN */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETH */
+&cpsw3g {
+	status = "okay";
+};
+
+/* Verdin MDIO */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1*/
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 and PWM_2*/
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3 DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp1075";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2 DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4 CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-0 = <&pinctrl_spi1>,
+		    <&pinctrl_spi1_cs0>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+	cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
index 90ddc71bc..a6808b10c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
@@ -35,5 +35,11 @@
 &main_uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+		fw-init-baudrate = <3000000>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
index c685df7de..997dfafd2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -207,6 +207,5 @@
 
 /* Verdin UART_2 */
 &wkup_uart0 {
-	/* FIXME: WKUP UART0 is used by DM firmware */
-	status = "reserved";
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index 5db52f237..6a06724b6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -233,6 +233,13 @@
 		>;
 	};
 
+	/* Verdin SPI_1 CS as GPIO */
+	pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
 	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
 		pinctrl-single,pins = <
@@ -599,12 +606,18 @@
 	pinctrl_spi1: main-spi1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
-			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
 			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
 			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
 		>;
 	};
 
+	/* Verdin SPI_1 CS */
+	pinctrl_spi1_cs0: main-spi1-cs0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+		>;
+	};
+
 	/* ETH_25MHz_CLK */
 	pinctrl_eth_clock: main-system-clkout0-default-pins {
 		pinctrl-single,pins = <
@@ -1278,7 +1291,7 @@
 /* Verdin SPI_1 */
 &main_spi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1>;
+	pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>;
 	ti,pindir-d0-out-d1-in;
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index eae052887..fef76f52a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -7,6 +7,7 @@
 
 &cbass_wakeup {
 	wkup_conf: syscon@43000000 {
+		bootph-all;
 		compatible = "syscon", "simple-mfd";
 		reg = <0x00 0x43000000 0x00 0x20000>;
 		#address-cells = <1>;
@@ -14,6 +15,7 @@
 		ranges = <0x0 0x00 0x43000000 0x20000>;
 
 		chipid: chipid@14 {
+			bootph-all;
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
 		};
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 11f14eef2..f1e15206e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -47,6 +47,7 @@
 	};
 
 	cbass_main: bus@f0000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -86,6 +87,7 @@
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
 		cbass_mcu: bus@4000000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -93,6 +95,7 @@
 		};
 
 		cbass_wakeup: bus@b00000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
new file mode 100644
index 000000000..5e80ca703
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000..5e1cbbc27
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_gpio0 {
+	p11-hog {
+		/* P11 - CSI2_CAMERA_GPIO1 */
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "CSI2_CAMERA_GPIO1";
+	};
+};
+
+&wkup_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 2de74428a..eadbdd9ff 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -46,6 +46,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -83,6 +84,7 @@
 	};
 
 	vsys_5v0: regulator-1 {
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -93,6 +95,7 @@
 
 	vdd_3v3: regulator-2 {
 		/* output of TLV62595DMQR-U12 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -118,6 +121,7 @@
 
 	vdd_3v3_sd: regulator-4 {
 		/* output of TPS22918DBVR-U21 */
+		bootph-all;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
 
@@ -132,6 +136,7 @@
 	};
 
 	vdd_sd_dv: regulator-5 {
+		bootph-all;
 		compatible = "regulator-gpio";
 		regulator-name = "sd_hs200_switch";
 		pinctrl-names = "default";
@@ -146,9 +151,11 @@
 	};
 
 	leds {
+		bootph-all;
 		compatible = "gpio-leds";
 
 		led-0 {
+			bootph-all;
 			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			function = LED_FUNCTION_HEARTBEAT;
@@ -156,6 +163,7 @@
 		};
 
 		led-1 {
+			bootph-all;
 			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 			function = LED_FUNCTION_DISK_ACTIVITY;
@@ -163,16 +171,19 @@
 		};
 
 		led-2 {
+			bootph-all;
 			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_CPU;
 		};
 
 		led-3 {
+			bootph-all;
 			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_LAN;
 		};
 
 		led-4 {
+			bootph-all;
 			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
 			function = LED_FUNCTION_WLAN;
 		};
@@ -245,6 +256,7 @@
 
 &main_pmx0 {
 	gpio0_pins_default: gpio0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
 			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
@@ -264,6 +276,7 @@
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
 		>;
@@ -283,6 +296,7 @@
 	};
 
 	local_i2c_pins_default: local-i2c-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
 			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
@@ -321,6 +335,7 @@
 	};
 
 	emmc_pins_default: emmc-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
 			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
@@ -336,12 +351,14 @@
 	};
 
 	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
 		>;
 	};
 
 	sd_pins_default: sd-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
 			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
@@ -418,6 +435,7 @@
 	};
 
 	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
 			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
@@ -425,7 +443,8 @@
 		>;
 	};
 
-	console_pins_default: console-default-pins {
+	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
 			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
@@ -597,6 +616,7 @@
 };
 
 &main_gpio0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&gpio0_pins_default>;
 	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
@@ -616,6 +636,7 @@
 };
 
 &main_gpio1 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mikrobus_gpio_pins_default>;
 	gpio-line-names = "", "", "", "", "",			/* 0-4 */
@@ -633,6 +654,7 @@
 };
 
 &main_i2c0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&local_i2c_pins_default>;
 	clock-frequency = <400000>;
@@ -651,6 +673,7 @@
 	};
 
 	tps65219: pmic@30 {
+		bootph-all;
 		compatible = "ti,tps65219";
 		reg = <0x30>;
 		buck1-supply = <&vsys_5v0>;
@@ -801,6 +824,7 @@
 };
 
 &sdhci0 {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -810,6 +834,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd_pins_default>;
 
@@ -850,8 +875,9 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	pinctrl-names = "default";
-	pinctrl-0 = <&console_pins_default>;
+	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
 };
 
@@ -870,6 +896,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_debug_uart_pins_default>;
 	status = "okay";
+
+	mcu {
+		compatible = "ti,cc1352p7";
+		reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+		vdds-supply = <&vdd_3v3>;
+	};
 };
 
 &dss {
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index a438baf54..4bc0134c9 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -35,6 +35,18 @@
 		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -93,6 +105,37 @@
 		>;
 	};
 
+	hdmi_int_pins_default: hdmi-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
@@ -184,10 +227,30 @@
 	};
 };
 
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI/HDMI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &main_i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 	status = "okay";
 
 	gpio_exp: gpio-expander@21 {
@@ -201,12 +264,43 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+		gpio-line-names = "", "GPIO1_CAN0_nEN",
 				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
 				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_int_pins_default>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
 	eeprom@51 {
 		compatible = "atmel,24c02";
 		pagesize = <16>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 7c98c1b85..b18092497 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -31,6 +31,7 @@
 
 	vmain_pd: regulator-0 {
 		/* TPS65988 PD CONTROLLER OUTPUT */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vmain_pd";
 		regulator-min-microvolt = <5000000>;
@@ -41,6 +42,7 @@
 
 	vcc_5v0: regulator-1 {
 		/* Output of LM34936 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -52,6 +54,7 @@
 
 	vcc_3v3_sys: regulator-2 {
 		/* output of LM61460-Q1 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_sys";
 		regulator-min-microvolt = <3300000>;
@@ -63,6 +66,7 @@
 
 	vdd_mmc1: regulator-3 {
 		/* TPS22918DBVR */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -75,6 +79,7 @@
 
 	vdd_sd_dv: regulator-4 {
 		/* Output of TLV71033 */
+		bootph-all;
 		compatible = "regulator-gpio";
 		regulator-name = "tlv71033";
 		pinctrl-names = "default";
@@ -102,6 +107,7 @@
 
 &main_pmx0 {
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
 			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
@@ -119,6 +125,7 @@
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
 			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
@@ -135,20 +142,32 @@
 	};
 
 	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
 		>;
 	};
 
 	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
 		>;
 	};
 };
 
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
 &main_i2c1 {
+	bootph-all;
 	exp1: gpio@22 {
+		bootph-all;
 		compatible = "ti,tca6424";
 		reg = <0x22>;
 		gpio-controller;
@@ -207,12 +226,18 @@
 	};
 };
 
+&fss {
+	bootph-all;
+};
+
 &ospi0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
 	flash@0 {
+		bootph-all;
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -225,6 +250,7 @@
 		cdns,read-delay = <4>;
 
 		partitions {
+			bootph-all;
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -260,6 +286,7 @@
 			};
 
 			partition@3fc0000 {
+				bootph-pre-ram;
 				label = "ospi.phypattern";
 				reg = <0x3fc0000 0x40000>;
 			};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
new file mode 100644
index 000000000..9cae12106
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Mallow Board";
+	compatible = "toradex,verdin-am62-nonwifi-mallow",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
new file mode 100644
index 000000000..81d834b22
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/mallow-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-mallow.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Mallow Board";
+	compatible = "toradex,verdin-am62-wifi-mallow",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index de36abb24..f0b8c9ab1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -101,8 +101,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 			ti,sci = <&dmsc>;
@@ -117,8 +122,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 			ti,sci = <&dmsc>;
@@ -144,6 +154,44 @@
 		};
 	};
 
+	dmss_csi: bus@4e000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>;
+
+		ti,sci-dev-id = <198>;
+
+		inta_main_dmss_csi: interrupt-controller@4e0a0000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x4e0a0000 0x00 0x8000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <200>;
+			ti,interrupt-ranges = <0 237 8>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+
+		main_bcdma_csi: dma-controller@4e230000 {
+			compatible = "ti,am62a-dmss-bcdma-csirx";
+			reg = <0x00 0x4e230000 0x00 0x100>,
+			      <0x00 0x4e180000 0x00 0x8000>,
+			      <0x00 0x4e100000 0x00 0x10000>;
+			reg-names = "gcfg", "rchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss_csi>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <199>;
+			ti,sci-rm-range-rchan = <0x21>;
+			power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		};
+	};
+
 	dmsc: system-controller@44043000 {
 		compatible = "ti,k2g-sci";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
@@ -816,4 +864,125 @@
 		clock-names = "fck";
 		status = "disabled";
 	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ti_csi2rx0: ticsi2rx@30102000 {
+		compatible = "ti,j721e-csi2rx-shim";
+		dmas = <&main_bcdma_csi 0 0x5000 0>;
+		dma-names = "rx0";
+		reg = <0x00 0x30102000 0x00 0x1000>;
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		cdns_csi2rx0: csi-bridge@30101000 {
+			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+			reg = <0x00 0x30101000 0x00 0x1000>;
+			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
+				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
+			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+				"pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+			phys = <&dphy0>;
+			phy-names = "dphy";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi0_port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				csi0_port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				csi0_port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				csi0_port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				csi0_port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	dphy0: phy@30110000 {
+		compatible = "cdns,dphy-rx";
+		reg = <0x00 0x30110000 0x00 0x1100>;
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 99f2878de..7b7142586 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -79,10 +79,10 @@
 		regulator-boot-on;
 	};
 
-	vcc_3v3_sys: regulator-2 {
+	vcc_3v3_main: regulator-2 {
 		/* output of LM5141-Q1 */
 		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_sys";
+		regulator-name = "vcc_3v3_main";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vmain_pd>;
@@ -101,6 +101,17 @@
 		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
 	};
 
+	vcc_3v3_sys: regulator-4 {
+		/* output of TPS222965DSGT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -114,6 +125,41 @@
 			default-state = "off";
 		};
 	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62Ax-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
 };
 
 &mcu_pmx0 {
@@ -219,6 +265,35 @@
 			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
 		>;
 	};
+
+	main_mcasp1_pins_default: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x090, PIN_INPUT, 2) /* (L19) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62AX_IOPAD(0x098, PIN_INPUT, 2) /* (R18) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62AX_IOPAD(0x08c, PIN_OUTPUT, 2) /* (K19) GPMC0_WEn.MCASP1_AXR0 */
+			AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */
+		>;
+	};
+};
+
+&mcu_gpio0 {
+	status = "okay";
 };
 
 &main_i2c0 {
@@ -244,6 +319,87 @@
 			};
 		};
 	};
+
+	tps659312: pmic@48 {
+		compatible = "ti,tps6593-q1";
+		reg = <0x48>;
+		ti,primary-pmic;
+		system-power-controller;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&mcu_gpio0>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		buck123-supply = <&vcc_3v3_sys>;
+		buck4-supply = <&vcc_3v3_sys>;
+		buck5-supply = <&vcc_3v3_sys>;
+		ldo1-supply = <&vcc_3v3_sys>;
+		ldo2-supply = <&vcc_3v3_sys>;
+		ldo3-supply = <&buck5>;
+		ldo4-supply = <&vcc_3v3_sys>;
+
+		regulators {
+			buck123: buck123 {
+				regulator-name = "vcc_core";
+				regulator-min-microvolt = <715000>;
+				regulator-max-microvolt = <895000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "vcc_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "vcc_1v8_sys";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "vddshv5_sdio";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "vpp_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "vcc_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "vdda_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &main_i2c1 {
@@ -257,6 +413,12 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 
 		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
 				   "BT_EN_SOC", "MMC1_SD_EN",
@@ -271,6 +433,46 @@
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
 	};
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+		DVDD-supply = <&buck5>;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "", "",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "WL_LT_EN", "CSI_RSTz",
+				  "", "",
+				  "", "",
+				  "", "",
+				  "SPI0_FET_SEL", "SPI0_FET_OE",
+				  "RGMII2_BRD_CONN_DET", "CSI_SEL2",
+				  "CSI_EN", "AUTO_100M_1000M_CONFIG",
+				  "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST";
+	};
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
 };
 
 &sdhci1 {
@@ -361,3 +563,23 @@
 		ti,min-output-impedance;
 	};
 };
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index c24ff9054..4c51bae06 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -40,18 +40,37 @@
 		};
 	};
 
+	main_conf: bus@100000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
 	dmss: bus@48000000 {
-		bootph-all;
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
 		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+		bootph-all;
 
 		ti,sci-dev-id = <25>;
 
 		secure_proxy_main: mailbox@4d000000 {
-			bootph-all;
 			compatible = "ti,am654-secure-proxy";
 			#mbox-cells = <1>;
 			reg-names = "target_data", "rt", "scfg";
@@ -60,11 +79,86 @@
 			      <0x00 0x4a400000 0x00 0x80000>;
 			interrupt-names = "rx_012";
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			bootph-all;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <5 69 35>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+			bootph-all;
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x10000>,
+			      <0x00 0x484a0000 0x00 0x2000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x1000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+			bootph-all;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
 		};
 	};
 
 	dmsc: system-controller@44043000 {
-		bootph-all;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
@@ -72,37 +166,72 @@
 			 <&secure_proxy_main 13>;
 		reg-names = "debug_messages";
 		reg = <0x00 0x44043000 0x00 0xfe0>;
+		bootph-all;
 
 		k3_pds: power-controller {
-			bootph-all;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
+			bootph-all;
 		};
 
 		k3_clks: clock-controller {
-			bootph-all;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
+			bootph-all;
 		};
 
 		k3_reset: reset-controller {
-			bootph-all;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
+			bootph-all;
 		};
 	};
 
-	main_pmx0: pinctrl@f4000 {
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+		       <&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
 		bootph-all;
+	};
+
+	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2ac>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
+		bootph-all;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
+		bootph-pre-ram;
 	};
 
 	main_timer0: timer@2400000 {
-		bootph-all;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x2400000 0x00 0x400>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -112,6 +241,91 @@
 		assigned-clock-parents = <&k3_clks 36 3>;
 		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
 		ti,timer-pwm;
+		bootph-all;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
 	};
 
 	main_uart0: serial@2800000 {
@@ -133,4 +347,548 @@
 		clock-names = "fclk";
 		status = "disabled";
 	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <92>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00601000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <52>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am64-sdhci-8bit";
+		reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 1>, <&k3_clks 57 2>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 2>;
+		assigned-clock-parents = <&k3_clks 57 4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,otap-del-sel-legacy = <0x8>;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,otap-del-sel-legacy = <0x8>;
+		status = "disabled";
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x08000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster1: mailbox@29010000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29010000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 6>, <&k3_clks 99 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
index 27ca1c9c6..14eb9ba83 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
@@ -11,5 +11,197 @@
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
+		bootph-all;
+	};
+
+	mcu_esm: esm@4100000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x4100000 0x00 0x1000>;
+		ti,esm-pins = <0>, <1>, <2>, <85>;
+		status = "reserved";
+		bootph-pre-ram;
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x4201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <24>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
+
+	mcu_mcan0: can@4e08000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e08000 0x00 0x200>,
+		      <0x00 0x4e00000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@4e18000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e18000 0x00 0x200>,
+		      <0x00 0x4e10000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		status = "disabled";
+	};
+
+	mcu_r5fss0: r5fss@79000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x79000000 0x00 0x79000000 0x8000>,
+			 <0x79020000 0x00 0x79020000 0x8000>;
+		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		mcu_r5fss0_core0: r5f@79000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x79000000 0x00008000>,
+			      <0x79020000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <9>;
+			ti,sci-proc-ids = <0x03 0xff>;
+			resets = <&k3_reset 9 1>;
+			firmware-name = "am62p-mcu-r5f0_0-fw";
+			ti,atcm-enable = <0>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <0>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi
new file mode 100644
index 000000000..85ce54563
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main2_thermal: main2-thermal {
+	       polling-delay-passive = <250>;	/* milliSeconds */
+	       polling-delay = <500>;		/* milliSeconds */
+	       thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			main2_crit: main2-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
index aaf4b793b..10a7059b2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
@@ -6,17 +6,17 @@
 
 &cbass_wakeup {
 	wkup_conf: bus@43000000 {
-		bootph-all;
 		compatible = "simple-bus";
 		reg = <0x00 0x43000000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x43000000 0x20000>;
+		bootph-all;
 
 		chipid: chipid@14 {
-			bootph-all;
 			compatible = "ti,am654-chipid";
 			reg = <0x14 0x4>;
+			bootph-all;
 		};
 	};
 
@@ -29,4 +29,70 @@
 		clock-names = "fclk";
 		status = "disabled";
 	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
index 294ab73ec..4f22b5d9f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -45,10 +45,10 @@
 	};
 
 	cbass_main: bus@f0000 {
-		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
+		bootph-all;
 
 		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
 			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
@@ -71,7 +71,7 @@
 			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
 			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
 			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
-			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06408000>, /* DMSS */
 			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
 			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
@@ -100,10 +100,10 @@
 				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
 				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
 				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+			bootph-all;
 		};
 
 		cbass_wakeup: bus@b00000 {
-			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -112,8 +112,11 @@
 				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
 				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
 				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+			bootph-all;
 		};
 	};
+
+	#include "k3-am62p-thermal.dtsi"
 };
 
 /* Now include peripherals for each bus segment */
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 6fb17b17c..60868862e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -8,6 +8,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
 #include "k3-am62p5.dtsi"
 
 / {
@@ -18,6 +21,12 @@
 		serial0 = &wkup_uart0;
 		serial2 = &main_uart0;
 		serial3 = &main_uart1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		spi0 = &ospi0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
 	};
 
 	chosen {
@@ -29,6 +38,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
 		      <0x00000008 0x80000000 0x00000001 0x80000000>;
 		device_type = "memory";
+		bootph-pre-ram;
 	};
 
 	reserved-memory {
@@ -52,35 +62,515 @@
 			no-map;
 		};
 	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS630702RNMR */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-2 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vddshv_sdio: regulator-3 {
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+};
+
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
 };
 
 &main_pmx0 {
-	main_uart0_pins_default: main-uart0-default-pins {
+	bootph-all;
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+		>;
 		bootph-all;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
+			AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C22) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	main_mcasp1_pins_default: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
+			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+			AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+			AM62PX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H23) MMC1_DAT1 */
+			AM62PX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (H22) MMC1_DAT2 */
+			AM62PX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
+			AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	main_mmc2_pins_default: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0120, PIN_INPUT, 0) /* (K24) MMC2_CMD */
+			AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK */
+			AM62PX_IOPAD(0x011C, PIN_INPUT, 0) /* () MMC2_CLKLB */
+			AM62PX_IOPAD(0x0114, PIN_INPUT, 0) /* (K23) MMC2_DAT0 */
+			AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
+			AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
+			AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
+		>;
+		bootph-all;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
+			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
+			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
+			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
+			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
+			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
+			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
+			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
+			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
+			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
+			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
+			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+			AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC */
+			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
 			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
 			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
-			AM62PX_IOPAD(0x1d0, PIN_INPUT, 0)	/* (A23) UART0_CTSn */
-			AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0)	/* (C22) UART0_RTSn */
 		>;
+		bootph-all;
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3.UART1_CTSn */
+			AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */
+			AM62PX_IOPAD(0x01ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR.UART1_RXD */
+			AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */
+		>;
+		bootph-all;
+	};
+
+	main_wlirq_pins_default: main-wlirq-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */
+			AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */
+			AM62PX_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */
+			AM62PX_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */
+			AM62PX_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */
+			AM62PX_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */
+			AM62PX_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */
+			AM62PX_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */
+			AM62PX_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */
+			AM62PX_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */
+			AM62PX_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	vddshv_sdio_pins_default: vddshvr-sdio-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */
+		>;
 		bootph-all;
+	};
+
+	wlan_en_pins_default: wlan-en-default-pins {
 		pinctrl-single,pins = <
-			AM62PX_IOPAD(0x194, PIN_INPUT, 2)	/* (D25) MCASP0_AXR3 */
-			AM62PX_IOPAD(0x198, PIN_OUTPUT, 2)	/* (E25) MCASP0_AXR2 */
-			AM62PX_IOPAD(0x1ac, PIN_INPUT, 2)	/* (G23) MCASP0_AFSR */
-			AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2)	/* (G20) MCASP0_ACLKR */
+			AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */
 		>;
 	};
 };
 
-&main_uart0 {
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+	bootph-all;
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;  /* 2.0V */
+	};
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "OLDI_INT#", "x8_NAND_DETECT",
+				   "UART1_FET_SEL", "MMC1_SD_EN",
+				   "VPP_EN", "EXP_PS_3V3_EN",
+				   "UART1_FET_BUF_EN", "EXP_HAT_DETECT",
+				   "DSI_GPIO0", "DSI_GPIO1",
+				   "OLDI_EDID", "BT_UART_WAKE_SOC_3V3",
+				   "USB_TYPEA_OC_INDICATION", "CSI_GPIO0",
+				   "CSI_GPIO1", "WLAN_ALERTn",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "DSI_EDID",
+				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		bootph-all;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_EN_SOC", "EXP_PS_5V0_EN",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "WL_LT_EN", "",
+				   "TP3", "TP6",
+				   "TP4", "TP7",
+				   "TP5", "TP8",
+				   "SoC_I2C2_MCAN_SEL", "GPIO_HDMI_RSTn",
+				   "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "GPIO_OLDI_RSTn", "GPIO_AUD_RSTn",
+				   "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST";
+	};
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&sdhci0 {
+	status = "okay";
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
 	bootph-all;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>,
+		    <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&fss {
+	bootph-all;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	bootph-all;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+		bootph-all;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bootph-all;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x00 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+				bootph-all;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	status = "okay";
+	bootph-all;
 };
 
 &main_uart1 {
@@ -88,29 +578,36 @@
 	pinctrl-0 = <&main_uart1_pins_default>;
 	/* Main UART1 is used by TIFS firmware */
 	status = "reserved";
-};
-
-&cbass_mcu {
 	bootph-all;
 };
 
 &mcu_pmx0 {
 	bootph-all;
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
-		bootph-all;
 		pinctrl-single,pins = <
 			AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */
 			AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (C6) WKUP_UART0_RTSn */
 			AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (D8) WKUP_UART0_RXD */
 			AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (D7) WKUP_UART0_TXD */
 		>;
+		bootph-all;
 	};
 };
 
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
-	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
 	status = "reserved";
+	bootph-all;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 677ff8de4..33768c02d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -28,6 +28,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -130,6 +131,7 @@
 &main_pmx0 {
 	/* First pad number is ALW package and second is AMC package */
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
 			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
@@ -137,6 +139,7 @@
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
 			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
@@ -167,6 +170,7 @@
 	};
 
 	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
 			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
@@ -182,6 +186,7 @@
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
 			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
@@ -207,6 +212,7 @@
 	};
 
 	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
 			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
@@ -274,6 +280,7 @@
 
 &mcu_pmx0 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
 			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
@@ -285,12 +292,14 @@
 
 &wkup_uart0 {
 	/* WKUP UART0 is used by DM firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_uart0_pins_default>;
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -298,6 +307,7 @@
 
 &main_uart1 {
 	/* Main UART1 is used by TIFS firmware */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
@@ -389,7 +399,15 @@
 	};
 };
 
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
 &sdhci0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
@@ -399,6 +417,7 @@
 
 &sdhci1 {
 	/* SD/MMC */
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
@@ -407,21 +426,25 @@
 };
 
 &cpsw3g {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>;
 };
 
 &cpsw_port1 {
+	bootph-all;
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
 
 &cpsw3g_mdio {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mdio1_pins_default>;
 
 	cpsw3g_phy0: ethernet-phy@0 {
+		bootph-all;
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
@@ -501,3 +524,12 @@
 		};
 	};
 };
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
new file mode 100644
index 000000000..6f4cd73c2
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IMX219 (RPi v2) Camera Module
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_imx219_fixed: imx219-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@10 {
+				compatible = "sony,imx219";
+				reg = <0x10>;
+
+				clocks = <&clk_imx219_fixed>;
+				clock-names = "xclk";
+
+				reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						link-frequencies = /bits/ 64 <456000000>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
new file mode 100644
index 000000000..9323a4b38
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
new file mode 100644
index 000000000..dcaa33a4c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Technexion TEVI-OV5640-*-RPI - OV5640 camera module
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	clk_ov5640_fixed: ov5640-xclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&main_i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* CAM port */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ov5640: camera@3c {
+				compatible = "ovti,ov5640";
+				reg = <0x3c>;
+
+				clocks = <&clk_ov5640_fixed>;
+				clock-names = "xclk";
+				powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
+
+				port {
+					csi2_cam0: endpoint {
+						remote-endpoint = <&csi2rx0_in_sensor>;
+						clock-lanes = <0>;
+						data-lanes = <1 2>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 0df54a741..ba624ef72 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -38,6 +38,7 @@
 	};
 
 	main_conf: syscon@43000000 {
+		bootph-all;
 		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
 		reg = <0x0 0x43000000 0x0 0x20000>;
 		#address-cells = <1>;
@@ -45,6 +46,7 @@
 		ranges = <0x0 0x0 0x43000000 0x20000>;
 
 		chipid@14 {
+			bootph-all;
 			compatible = "ti,am654-chipid";
 			reg = <0x00000014 0x4>;
 		};
@@ -61,7 +63,7 @@
 			#phy-cells = <1>;
 		};
 
-		epwm_tbclk: clock-controller@4140 {
+		epwm_tbclk: clock-controller@4130 {
 			compatible = "ti,am64-epwm-tbclk";
 			reg = <0x4130 0x4>;
 			#clock-cells = <1>;
@@ -96,7 +98,8 @@
 	};
 
 	dmss: bus@48000000 {
-		compatible = "simple-mfd";
+		bootph-all;
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		dma-ranges;
@@ -105,6 +108,7 @@
 		ti,sci-dev-id = <25>;
 
 		secure_proxy_main: mailbox@4d000000 {
+			bootph-all;
 			compatible = "ti,am654-secure-proxy";
 			#mbox-cells = <1>;
 			reg-names = "target_data", "rt", "scfg";
@@ -134,8 +138,13 @@
 			      <0x00 0x4c000000 0x00 0x20000>,
 			      <0x00 0x4a820000 0x00 0x20000>,
 			      <0x00 0x4aa40000 0x00 0x20000>,
-			      <0x00 0x4bc00000 0x00 0x100000>;
-			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4bc00000 0x00 0x100000>,
+			      <0x00 0x48600000 0x00 0x8000>,
+			      <0x00 0x484a4000 0x00 0x2000>,
+			      <0x00 0x484c2000 0x00 0x2000>,
+			      <0x00 0x48420000 0x00 0x2000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "bchan";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <3>;
 
@@ -151,8 +160,13 @@
 			reg = <0x00 0x485c0000 0x00 0x100>,
 			      <0x00 0x4a800000 0x00 0x20000>,
 			      <0x00 0x4aa00000 0x00 0x40000>,
-			      <0x00 0x4b800000 0x00 0x400000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			      <0x00 0x4b800000 0x00 0x400000>,
+			      <0x00 0x485e0000 0x00 0x20000>,
+			      <0x00 0x484a0000 0x00 0x4000>,
+			      <0x00 0x484c0000 0x00 0x2000>,
+			      <0x00 0x48430000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+				    "ring", "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_dmss>;
 			#dma-cells = <2>;
 
@@ -188,6 +202,7 @@
 	};
 
 	dmsc: system-controller@44043000 {
+		bootph-all;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 		mbox-names = "rx", "tx";
@@ -197,22 +212,26 @@
 		reg = <0x00 0x44043000 0x00 0xfe0>;
 
 		k3_pds: power-controller {
+			bootph-all;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clock-controller {
+			bootph-all;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
 
 		k3_reset: reset-controller {
+			bootph-all;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
 		};
 	};
 
 	main_pmx0: pinctrl@f4000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0xf4000 0x00 0x2d0>;
 		#pinctrl-cells = <1>;
@@ -221,6 +240,7 @@
 	};
 
 	main_timer0: timer@2400000 {
+		bootph-all;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x2400000 0x00 0x400>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,6 +385,7 @@
 	};
 
 	main_esm: esm@420000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x420000 0x00 0x1000>;
 		ti,esm-pins = <160>, <161>;
@@ -612,6 +633,10 @@
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@fa00000 {
@@ -623,13 +648,18 @@
 		clock-names = "clk_ahb", "clk_xin";
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-sdr104 = <0x6>;
 		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
 	};
 
 	cpsw3g: ethernet@8000000 {
@@ -1158,21 +1188,21 @@
 	};
 
 	main_rti0: watchdog@e000000 {
-			compatible = "ti,j7-rti-wdt";
-			reg = <0x00 0xe000000 0x00 0x100>;
-			clocks = <&k3_clks 125 0>;
-			power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
-			assigned-clocks = <&k3_clks 125 0>;
-			assigned-clock-parents = <&k3_clks 125 2>;
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0xe000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
 	};
 
 	main_rti1: watchdog@e010000 {
-			compatible = "ti,j7-rti-wdt";
-			reg = <0x00 0xe010000 0x00 0x100>;
-			clocks = <&k3_clks 126 0>;
-			power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
-			assigned-clocks = <&k3_clks 126 0>;
-			assigned-clock-parents = <&k3_clks 126 2>;
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0xe010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
 	};
 
 	icssg0: icssg@30000000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 686d49790..b9508072b 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -146,6 +146,7 @@
 	};
 
 	mcu_pmx0: pinctrl@4084000 {
+		bootph-all;
 		compatible = "pinctrl-single";
 		reg = <0x00 0x4084000 0x00 0x84>;
 		#pinctrl-cells = <1>;
@@ -154,6 +155,7 @@
 	};
 
 	mcu_esm: esm@4100000 {
+		bootph-pre-ram;
 		compatible = "ti,j721e-esm";
 		reg = <0x00 0x4100000 0x00 0x1000>;
 		ti,esm-pins = <0>, <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 1c2c8f0da..1678e74cb 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -29,7 +29,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -39,6 +39,54 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	leds {
@@ -126,6 +174,12 @@
 			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
 		>;
 	};
+
+	rtc_pins_default: rtc-defaults-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0278, PIN_INPUT, 7)	/* (C19) EXTINTn.GPIO1_70 */
+		>;
+	};
 };
 
 &cpsw3g {
@@ -160,6 +214,34 @@
 	status = "disabled";
 };
 
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
 &main_i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -177,9 +259,38 @@
 	i2c_som_rtc: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <70 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -200,6 +311,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index 8e9c2bc70..0187c42ae 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -47,6 +47,7 @@
 	};
 
 	cbass_main: bus@f4000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -85,6 +86,7 @@
 			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
 
 		cbass_mcu: bus@4000000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index b4a1f73d4..8c5651d2c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -35,6 +35,7 @@
 	};
 
 	memory@80000000 {
+		bootph-all;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -108,6 +109,7 @@
 
 	evm_12v0: regulator-0 {
 		/* main DC jack */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "evm_12v0";
 		regulator-min-microvolt = <12000000>;
@@ -129,6 +131,7 @@
 
 	vsys_3v3: regulator-2 {
 		/* output of LM5140 */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vsys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -140,6 +143,7 @@
 
 	vdd_mmc1: regulator-3 {
 		/* TPS2051BD */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -161,6 +165,7 @@
 	};
 
 	vtt_supply: regulator-5 {
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		pinctrl-names = "default";
@@ -251,6 +256,7 @@
 	};
 
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
 			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -269,6 +275,7 @@
 	};
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -276,6 +283,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
 			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -283,6 +291,7 @@
 	};
 
 	mdio1_pins_default: mdio1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
 			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
@@ -290,6 +299,7 @@
 	};
 
 	rgmii1_pins_default: rgmii1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
 			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
@@ -307,6 +317,7 @@
 	};
 
        rgmii2_pins_default: rgmii2-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
 			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
@@ -324,6 +335,7 @@
 	};
 
 	main_usb0_pins_default: main-usb0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
 		>;
@@ -366,6 +378,7 @@
 	};
 
 	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
 		>;
@@ -373,6 +386,7 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -387,11 +401,21 @@
 };
 
 &main_i2c0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
 
+	gpio@38 {
+		/* TCA9554 */
+		compatible = "nxp,pca9554";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HSE_DETECT";
+	};
+
 	eeprom@50 {
 		/* AT24CM01 */
 		compatible = "atmel,24c1024";
@@ -400,12 +424,14 @@
 };
 
 &main_i2c1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 
 	exp1: gpio@22 {
+		bootph-all;
 		compatible = "ti,tca6424";
 		reg = <0x22>;
 		gpio-controller;
@@ -438,11 +464,19 @@
 	};
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+&main_gpio0 {
+	bootph-all;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &main_spi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -457,16 +491,19 @@
 	};
 };
 
+/* eMMC */
 &sdhci0 {
-	/* emmc */
+	status = "okay";
 	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
+	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -476,11 +513,13 @@
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 	ti,usb2-only;
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "otg";
 	maximum-speed = "high-speed";
 	pinctrl-names = "default";
@@ -488,11 +527,13 @@
 };
 
 &cpsw3g {
+	bootph-all;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
 };
 
 &cpsw_port1 {
+	bootph-all;
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&cpsw3g_phy0>;
 };
@@ -503,11 +544,13 @@
 };
 
 &cpsw3g_mdio {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio1_pins_default>;
 
 	cpsw3g_phy0: ethernet-phy@0 {
+		bootph-all;
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 9175e9684..53b64e554 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -264,6 +264,7 @@
 };
 
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 722fd285a..1dddd6fc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -34,6 +34,7 @@
 	};
 
 	memory@80000000 {
+		bootph-pre-ram;
 		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
@@ -107,6 +108,7 @@
 
 	vusb_main: regulator-0 {
 		/* USB MAIN INPUT 5V DC */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vusb_main5v0";
 		regulator-min-microvolt = <5000000>;
@@ -117,6 +119,7 @@
 
 	vcc_3v3_sys: regulator-1 {
 		/* output of LP8733xx */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_sys";
 		regulator-min-microvolt = <3300000>;
@@ -128,6 +131,7 @@
 
 	vdd_mmc1: regulator-2 {
 		/* TPS2051BD */
+		bootph-all;
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_mmc1";
 		regulator-min-microvolt = <3300000>;
@@ -234,6 +238,7 @@
 
 &main_pmx0 {
 	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
 			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
@@ -248,6 +253,7 @@
 	};
 
 	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
 			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
@@ -257,6 +263,7 @@
 	};
 
 	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-pre-ram;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
 			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
@@ -266,12 +273,14 @@
 	};
 
 	main_usb0_pins_default: main-usb0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
 		>;
 	};
 
 	main_i2c0_pins_default: main-i2c0-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
 			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
@@ -279,6 +288,7 @@
 	};
 
 	main_i2c1_pins_default: main-i2c1-default-pins {
+		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
 			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
@@ -367,6 +377,7 @@
 };
 
 &main_uart0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -375,12 +386,14 @@
 
 &main_uart1 {
 	/* main_uart1 is reserved for firmware usage */
+	bootph-pre-ram;
 	status = "reserved";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 };
 
 &main_i2c0 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -393,12 +406,14 @@
 };
 
 &main_i2c1 {
+	bootph-all;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
 
 	exp1: gpio@70 {
+		bootph-all;
 		compatible = "nxp,pca9538";
 		reg = <0x70>;
 		gpio-controller;
@@ -418,12 +433,17 @@
 	};
 };
 
-/* mcu_gpio0 is reserved for mcu firmware usage */
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
 &mcu_gpio0 {
 	status = "reserved";
 };
 
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
 &sdhci0 {
+	status = "okay";
 	vmmc-supply = <&wlan_en>;
 	bus-width = <4>;
 	non-removable;
@@ -443,8 +463,10 @@
 	};
 };
 
+/* SD/MMC */
 &sdhci1 {
-	/* SD/MMC */
+	bootph-all;
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -454,11 +476,22 @@
 };
 
 &serdes_ln_ctrl {
+	bootph-all;
 	idle-states = <AM64_SERDES0_LANE0_USB>;
 };
 
+&serdes_refclk {
+	bootph-all;
+};
+
+&serdes_wiz0 {
+	bootph-all;
+};
+
 &serdes0 {
+	bootph-all;
 	serdes0_usb_link: phy@0 {
+		bootph-all;
 		reg = <0>;
 		cdns,num-lanes = <1>;
 		#phy-cells = <0>;
@@ -468,10 +501,12 @@
 };
 
 &usbss0 {
+	bootph-all;
 	ti,vbus-divider;
 };
 
 &usb0 {
+	bootph-all;
 	dr_mode = "host";
 	maximum-speed = "super-speed";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
index 04c15b64f..55102d35c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/pwm/pwm.h>
@@ -19,6 +20,7 @@
 	compatible = "tq,am642-tqma6442l-mbax4xxl", "tq,am642-tqma6442l",
 		     "ti,am642";
 	model = "TQ-Systems TQMa64xxL SoM on MBax4xxL carrier board";
+	chassis-type = "embedded";
 
 	aliases {
 		ethernet0 = &cpsw_port1;
@@ -58,12 +60,14 @@
 		pinctrl-0 = <&mcu_gpio_leds_pins>;
 
 		led-0 {
-			label = "led0";
 			gpios = <&mcu_gpio0 8 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
 		};
 		led-1 {
-			label = "led1";
 			gpios = <&mcu_gpio0 9 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_INDICATOR;
 		};
 	};
 
@@ -170,7 +174,8 @@
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&main_gpio1_hog_pins>;
+	pinctrl-0 = <&main_gpio1_hog_pins>,
+		    <&main_gpio1_pru_pins>;
 	gpio-line-names =
 		"", "", "", "", /* 0-3 */
 		"", "", "", "", /* 4-7 */
@@ -420,7 +425,6 @@
 	ti,driver-strength-ohm = <50>;
 	ti,fails-without-test-cd;
 	/* Enabled by overlay */
-	status = "disabled";
 };
 
 &tscadc0 {
@@ -545,6 +549,79 @@
 		>;
 	};
 
+	main_gpio1_pru_pins: main-gpio1-pru-pins {
+		pinctrl-single,pins = <
+			/* (Y1) PRG0_PRU0_GPO0.GPIO1_0 */
+			AM64X_IOPAD(0x0160, PIN_INPUT, 7)
+			/* (R4) PRG0_PRU0_GPO1.GPIO1_1 */
+			AM64X_IOPAD(0x0164, PIN_INPUT, 7)
+			/* (U2) PRG0_PRU0_GPO2.GPIO1_2 */
+			AM64X_IOPAD(0x0168, PIN_INPUT, 7)
+			/* (V2) PRG0_PRU0_GPO3.GPIO1_3 */
+			AM64X_IOPAD(0x016c, PIN_INPUT, 7)
+			/* (AA2) PRG0_PRU0_GPO4.GPIO1_4 */
+			AM64X_IOPAD(0x0170, PIN_INPUT, 7)
+			/* (R3) PRG0_PRU0_GPO5.GPIO1_5 */
+			AM64X_IOPAD(0x0174, PIN_INPUT, 7)
+			/* (T3) PRG0_PRU0_GPO6.GPIO1_6 */
+			AM64X_IOPAD(0x0178, PIN_INPUT, 7)
+			/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
+			AM64X_IOPAD(0x017c, PIN_INPUT, 7)
+			/* (T2) PRG0_PRU0_GPO8.GPIO1_8 */
+			AM64X_IOPAD(0x0180, PIN_INPUT, 7)
+			/* (Y3) PRG0_PRU0_GPO11.GPIO1_11 */
+			AM64X_IOPAD(0x018c, PIN_INPUT, 7)
+			/* (AA3) PRG0_PRU0_GPO12.GPIO1_12 */
+			AM64X_IOPAD(0x0190, PIN_INPUT, 7)
+			/* (R6) PRG0_PRU0_GPO13.GPIO1_13 */
+			AM64X_IOPAD(0x0194, PIN_INPUT, 7)
+			/* (V4) PRG0_PRU0_GPO14.GPIO1_14 */
+			AM64X_IOPAD(0x0198, PIN_INPUT, 7)
+			/* (T5) PRG0_PRU0_GPO15.GPIO1_15 */
+			AM64X_IOPAD(0x019c, PIN_INPUT, 7)
+			/* (U4) PRG0_PRU0_GPO16.GPIO1_16 */
+			AM64X_IOPAD(0x01a0, PIN_INPUT, 7)
+			/* (U1) PRG0_PRU0_GPO17.GPIO1_17 */
+			AM64X_IOPAD(0x01a4, PIN_INPUT, 7)
+			/* (V1) PRG0_PRU0_GPO18.GPIO1_18 */
+			AM64X_IOPAD(0x01a8, PIN_INPUT, 7)
+			/* (W1) PRG0_PRU0_GPO19.GPIO1_19 */
+			AM64X_IOPAD(0x01ac, PIN_INPUT, 7)
+			/* (Y2) PRG0_PRU1_GPO0.GPIO1_20 */
+			AM64X_IOPAD(0x01b0, PIN_INPUT, 7)
+			/* (W2) PRG0_PRU1_GPO1.GPIO1_21 */
+			AM64X_IOPAD(0x01b4, PIN_INPUT, 7)
+			/* (V3) PRG0_PRU1_GPO2.GPIO1_22 */
+			AM64X_IOPAD(0x01b8, PIN_INPUT, 7)
+			/* (T4) PRG0_PRU1_GPO3.GPIO1_23 */
+			AM64X_IOPAD(0x01bc, PIN_INPUT, 7)
+			/* (W3) PRG0_PRU1_GPO4.GPIO1_24 */
+			AM64X_IOPAD(0x01c0, PIN_INPUT, 7)
+			/* (P4) PRG0_PRU1_GPO5.GPIO1_25 */
+			AM64X_IOPAD(0x01c4, PIN_INPUT, 7)
+			/* (R5) PRG0_PRU1_GPO6.GPIO1_26 */
+			AM64X_IOPAD(0x01c8, PIN_INPUT, 7)
+			/* (R1) PRG0_PRU1_GPO8.GPIO1_28 */
+			AM64X_IOPAD(0x01d0, PIN_INPUT, 7)
+			/* (W4) PRG0_PRU1_GPO11.GPIO1_31 */
+			AM64X_IOPAD(0x01dc, PIN_INPUT, 7)
+			/* (Y4) PRG0_PRU1_GPO12.GPIO1_32 */
+			AM64X_IOPAD(0x01e0, PIN_INPUT, 7)
+			/* (T6) PRG0_PRU1_GPO13.GPIO1_33 */
+			AM64X_IOPAD(0x01e4, PIN_INPUT, 7)
+			/* (U6) PRG0_PRU1_GPO14.GPIO1_34 */
+			AM64X_IOPAD(0x01e8, PIN_INPUT, 7)
+			/* (U5) PRG0_PRU1_GPO15.GPIO1_35 */
+			AM64X_IOPAD(0x01ec, PIN_INPUT, 7)
+			/* (AA4) PRG0_PRU1_GPO16.GPIO1_36 */
+			AM64X_IOPAD(0x01f0, PIN_INPUT, 7)
+			/* (P2) PRG0_MDIO0_MDIO.GPIO1_40 */
+			AM64X_IOPAD(0x0200, PIN_INPUT, 7)
+			/* (P3) PRG0_MDIO0_MDC.GPIO1_41 */
+			AM64X_IOPAD(0x0204, PIN_INPUT, 7)
+		>;
+	};
+
 	main_mcan0_pins: main-mcan0-pins {
 		pinctrl-single,pins = <
 			/* (B17) MCAN0_RX */
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 6229849b5..6c785eff7 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -85,6 +85,15 @@
 			no-map;
 		};
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &main_i2c0 {
@@ -96,11 +105,13 @@
 	tmp1075: temperature-sensor@4a {
 		compatible = "ti,tmp1075";
 		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
 	};
 
 	eeprom0: eeprom@50 {
 		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x50>;
+		vcc-supply = <&reg_1v8>;
 		pagesize = <16>;
 		read-only;
 	};
@@ -114,6 +125,7 @@
 	eeprom1: eeprom@54 {
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x54>;
+		vcc-supply = <&reg_1v8>;
 		pagesize = <32>;
 	};
 };
@@ -207,6 +219,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	non-removable;
 	disable-wp;
 	no-sdio;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
index 51f902fa3..1d1979859 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) Siemens AG, 2021
+ * Copyright (c) Siemens AG, 2021-2023
  *
  * Authors:
  *   Jan Kiszka <jan.kiszka@siemens.com>
@@ -44,3 +44,11 @@
 &tx_pru2_1 {
 	status = "disabled";
 };
+
+&icssg0_eth {
+	status = "disabled";
+};
+
+&icssg0_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e9419c4fe..e9b57b87e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -20,7 +20,9 @@
 
 &main_gpio1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	pinctrl-0 =
+		<&main_pcie_enable_pins_default>,
+		<&cp2102n_reset_pin_default>;
 	gpio-line-names =
 		"", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index b849648d5..61a634afa 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -9,8 +9,8 @@
  * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
  */
 
-#include "k3-am654.dtsi"
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	aliases {
@@ -27,6 +27,8 @@
 		spi0 = &mcu_spi0;
 		mmc0 = &sdhci1;
 		mmc1 = &sdhci0;
+		ethernet1 = &icssg0_emac0;
+		ethernet2 = &icssg0_emac1;
 	};
 
 	chosen {
@@ -111,9 +113,498 @@
 		#clock-cells = <0>;
 		clock-frequency = <19200000>;
 	};
+
+	/* Dual Ethernet application node on PRU-ICSSG0 */
+	icssg0_eth: icssg0-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg0_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+
+		ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>,
+			<&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg0_mii_g_rt>;
+		ti,mii-rt = <&icssg0_mii_rt>;
+		ti,iep = <&icssg0_iep0>,  <&icssg0_iep1>;
+
+		interrupt-parent = <&icssg0_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+		       <&main_udmap 0xc101>, /* egress slice 0 */
+		       <&main_udmap 0xc102>, /* egress slice 0 */
+		       <&main_udmap 0xc103>, /* egress slice 0 */
+		       <&main_udmap 0xc104>, /* egress slice 1 */
+		       <&main_udmap 0xc105>, /* egress slice 1 */
+		       <&main_udmap 0xc106>, /* egress slice 1 */
+		       <&main_udmap 0xc107>, /* egress slice 1 */
+		       <&main_udmap 0x4100>, /* ingress slice 0 */
+		       <&main_udmap 0x4101>; /* ingress slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg0_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg0_eth0_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			icssg0_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg0_eth1_phy>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+				ti,half-duplex-capable;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
 };
 
 &wkup_pmx0 {
+	pinctrl-names =
+		"default",
+		"d0-uart0-rxd",  "d0-gpio",  "d0-gpio-pullup",  "d0-gpio-pulldown",
+		"d1-uart0-txd",  "d1-gpio",  "d1-gpio-pullup",  "d1-gpio-pulldown",
+		"d2-uart0-ctsn", "d2-gpio",  "d2-gpio-pullup",  "d2-gpio-pulldown",
+		"d3-uart0-rtsn", "d3-gpio",  "d3-gpio-pullup",  "d3-gpio-pulldown",
+		"d10-spi0-cs0",  "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown",
+		"d11-spi0-d0",   "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown",
+		"d12-spi0-d1",   "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown",
+		"d13-spi0-clk",  "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown",
+		"a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown",
+		"a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown",
+		"a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown",
+		"a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown",
+		"a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown",
+		"a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown";
+
+	pinctrl-0 = <&d0_uart0_rxd>;
+	pinctrl-1 = <&d0_uart0_rxd>;
+	pinctrl-2 = <&d0_gpio>;
+	pinctrl-3 = <&d0_gpio_pullup>;
+	pinctrl-4 = <&d0_gpio_pulldown>;
+	pinctrl-5 = <&d1_uart0_txd>;
+	pinctrl-6 = <&d1_gpio>;
+	pinctrl-7 = <&d1_gpio_pullup>;
+	pinctrl-8 = <&d1_gpio_pulldown>;
+	pinctrl-9 = <&d2_uart0_ctsn>;
+	pinctrl-10 = <&d2_gpio>;
+	pinctrl-11 = <&d2_gpio_pullup>;
+	pinctrl-12 = <&d2_gpio_pulldown>;
+	pinctrl-13 = <&d3_uart0_rtsn>;
+	pinctrl-14 = <&d3_gpio>;
+	pinctrl-15 = <&d3_gpio_pullup>;
+	pinctrl-16 = <&d3_gpio_pulldown>;
+	pinctrl-17 = <&d10_spi0_cs0>;
+	pinctrl-18 = <&d10_gpio>;
+	pinctrl-19 = <&d10_gpio_pullup>;
+	pinctrl-20 = <&d10_gpio_pulldown>;
+	pinctrl-21 = <&d11_spi0_d0>;
+	pinctrl-22 = <&d11_gpio>;
+	pinctrl-23 = <&d11_gpio_pullup>;
+	pinctrl-24 = <&d11_gpio_pulldown>;
+	pinctrl-25 = <&d12_spi0_d1>;
+	pinctrl-26 = <&d12_gpio>;
+	pinctrl-27 = <&d12_gpio_pullup>;
+	pinctrl-28 = <&d12_gpio_pulldown>;
+	pinctrl-29 = <&d13_spi0_clk>;
+	pinctrl-30 = <&d13_gpio>;
+	pinctrl-31 = <&d13_gpio_pullup>;
+	pinctrl-32 = <&d13_gpio_pulldown>;
+	pinctrl-33 = <&a0_gpio>;
+	pinctrl-34 = <&a0_gpio_pullup>;
+	pinctrl-35 = <&a0_gpio_pulldown>;
+	pinctrl-36 = <&a1_gpio>;
+	pinctrl-37 = <&a1_gpio_pullup>;
+	pinctrl-38 = <&a1_gpio_pulldown>;
+	pinctrl-39 = <&a2_gpio>;
+	pinctrl-40 = <&a2_gpio_pullup>;
+	pinctrl-41 = <&a2_gpio_pulldown>;
+	pinctrl-42 = <&a3_gpio>;
+	pinctrl-43 = <&a3_gpio_pullup>;
+	pinctrl-44 = <&a3_gpio_pulldown>;
+	pinctrl-45 = <&a4_gpio>;
+	pinctrl-46 = <&a4_gpio_pullup>;
+	pinctrl-47 = <&a4_gpio_pulldown>;
+	pinctrl-48 = <&a5_gpio>;
+	pinctrl-49 = <&a5_gpio_pullup>;
+	pinctrl-50 = <&a5_gpio_pulldown>;
+
+	d0_uart0_rxd: d0-uart0-rxd-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+		>;
+	};
+
+	d0_gpio: d0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7)
+		>;
+	};
+
+	d0_gpio_pullup: d0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d0_gpio_pulldown: d0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P4) WKUP_GPIO0_29 */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d1_uart0_txd: d1-uart0-txd-pins {
+		pinctrl-single,pins = <
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d1_gpio: d1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pullup: d1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7)
+		>;
+	};
+
+	d1_gpio_pulldown: d1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_30 */
+			AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d2_uart0_ctsn: d2-uart0-ctsn-pins {
+		pinctrl-single,pins = <
+			/* (P1) MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)
+		>;
+	};
+
+	d2_gpio: d2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pullup: d2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7)
+		>;
+	};
+
+	d2_gpio_pulldown: d2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (P5) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d3_uart0_rtsn: d3-uart0-rtsn-pins {
+		pinctrl-single,pins = <
+			/* (N3) MCU_UART0_RTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)
+		>;
+	};
+
+	d3_gpio: d3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pullup: d3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	d3_gpio_pulldown: d3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d10_spi0_cs0: d10-spi0-cs0-pins {
+		pinctrl-single,pins = <
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	d10_gpio: d10-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pullup: d10-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7)
+		>;
+	};
+
+	d10_gpio_pulldown: d10-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y4) WKUP_GPIO0_51 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d11_spi0_d0: d11-spi0-d0-pins {
+		pinctrl-single,pins = <
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+		>;
+	};
+
+	d11_gpio: d11-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pullup: d11-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7)
+		>;
+	};
+
+	d11_gpio_pulldown: d11-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y3) WKUP_GPIO0_49 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d12_spi0_d1: d12-spi0-d1-pins {
+		pinctrl-single,pins = <
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+		>;
+	};
+
+	d12_gpio: d12-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pullup: d12-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d12_gpio_pulldown: d12-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y2) WKUP_GPIO0_50 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d13_spi0_clk: d13-spi0-clk-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+		>;
+	};
+
+	d13_gpio: d13-gpio-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pullup: d13-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7)
+		>;
+	};
+
+	d13_gpio_pulldown: d13-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (Y1) WKUP_GPIO0_48 */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a0_gpio: a0-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pullup: a0-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	a0_gpio_pulldown: a0-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L6) WKUP_GPIO0_45 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a1_gpio: a1-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pullup: a1-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7)
+		>;
+	};
+
+	a1_gpio_pulldown: a1-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M6) WKUP_GPIO0_44 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a2_gpio: a2-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pullup: a2-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7)
+		>;
+	};
+
+	a2_gpio_pulldown: a2-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L5) WKUP_GPIO0_43 */
+			AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a3_gpio: a3-gpio-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pullup: a3-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7)
+		>;
+	};
+
+	a3_gpio_pulldown: a3-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (M5) WKUP_GPIO0_39 */
+			AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a4_gpio: a4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pullup: a4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7)
+		>;
+	};
+
+	a4_gpio_pulldown: a4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (L2) WKUP_GPIO0_42 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	a5_gpio: a5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7)
+		>;
+	};
+
+	a5_gpio_pullup: a5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	a5_gpio_pulldown: a5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (N5) WKUP_GPIO0_35 */
+			AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
 			/* (AC7) WKUP_I2C0_SCL */
@@ -146,23 +637,6 @@
 		>;
 	};
 
-	arduino_uart_pins_default: arduino-uart-default-pins {
-		pinctrl-single,pins = <
-			/* (P4) MCU_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
-			/* (P5) MCU_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
-		>;
-	};
-
-	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
-		pinctrl-single,pins = <
-			/* (P1) WKUP_GPIO0_31 */
-			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
-			/* (N3) WKUP_GPIO0_33 */
-			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
-		>;
-	};
 
 	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
 		pinctrl-single,pins = <
@@ -242,6 +716,220 @@
 };
 
 &main_pmx0 {
+	pinctrl-names =
+		"default",
+		"d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown",
+		"d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown",
+		"d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown",
+		"d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown",
+		"d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown",
+		"d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown";
+
+	pinctrl-0 = <&d4_ehrpwm0_a>;
+	pinctrl-1 = <&d4_ehrpwm0_a>;
+	pinctrl-2 = <&d4_gpio>;
+	pinctrl-3 = <&d4_gpio_pullup>;
+	pinctrl-4 = <&d4_gpio_pulldown>;
+
+	pinctrl-5 = <&d5_ehrpwm1_a>;
+	pinctrl-6 = <&d5_gpio>;
+	pinctrl-7 = <&d5_gpio_pullup>;
+	pinctrl-8 = <&d5_gpio_pulldown>;
+
+	pinctrl-9 = <&d6_ehrpwm2_a>;
+	pinctrl-10 = <&d6_gpio>;
+	pinctrl-11 = <&d6_gpio_pullup>;
+	pinctrl-12 = <&d6_gpio_pulldown>;
+
+	pinctrl-13 = <&d7_ehrpwm3_a>;
+	pinctrl-14 = <&d7_gpio>;
+	pinctrl-15 = <&d7_gpio_pullup>;
+	pinctrl-16 = <&d7_gpio_pulldown>;
+
+	pinctrl-17 = <&d8_ehrpwm4_a>;
+	pinctrl-18 = <&d8_gpio>;
+	pinctrl-19 = <&d8_gpio_pullup>;
+	pinctrl-20 = <&d8_gpio_pulldown>;
+
+	pinctrl-21 = <&d9_ehrpwm5_a>;
+	pinctrl-22 = <&d9_gpio>;
+	pinctrl-23 = <&d9_gpio_pullup>;
+	pinctrl-24 = <&d9_gpio_pulldown>;
+
+	d4_ehrpwm0_a: d4-ehrpwm0-a-pins {
+		pinctrl-single,pins = <
+			/* (AG18) EHRPWM0_A */
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d4_gpio: d4-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 7)
+		>;
+	};
+
+	d4_gpio_pullup: d4-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d4_gpio_pulldown: d4-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d5_ehrpwm1_a: d5-ehrpwm1-a-pins {
+		pinctrl-single,pins = <
+			/* (AF17) EHRPWM1_A */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d5_gpio: d5-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT, 7)
+		>;
+	};
+
+	d5_gpio_pullup: d5-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d5_gpio_pulldown: d5-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d6_ehrpwm2_a: d6-ehrpwm2-a-pins {
+		pinctrl-single,pins = <
+			/* (AH16) EHRPWM2_A */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d6_gpio: d6-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT, 7)
+		>;
+	};
+
+	d6_gpio_pullup: d6-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d6_gpio_pulldown: d6-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d7_ehrpwm3_a: d7-ehrpwm3-a-pins {
+		pinctrl-single,pins = <
+			/* (AH15) EHRPWM3_A */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d7_gpio: d7-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT, 7)
+		>;
+	};
+
+	d7_gpio_pullup: d7-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d7_gpio_pulldown: d7-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d8_ehrpwm4_a: d8-ehrpwm4-a-pins {
+		pinctrl-single,pins = <
+			/* (AG15) EHRPWM4_A */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d8_gpio: d8-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT, 7)
+		>;
+	};
+
+	d8_gpio_pullup: d8-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d8_gpio_pulldown: d8-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	d9_ehrpwm5_a: d9-ehrpwm5-a-pins {
+		pinctrl-single,pins = <
+			/* (AD15) EHRPWM5_A */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5)
+		>;
+	};
+
+	d9_gpio: d9-gpio-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT, 7)
+		>;
+	};
+
+	d9_gpio_pullup: d9-gpio-pullup-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7)
+		>;
+	};
+
+	d9_gpio_pulldown: d9-gpio-pulldown-pins {
+		pinctrl-single,pins = <
+			/* (AD15) GPIO0_51 */
+			AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7)
+		>;
+	};
+
+	main_pcie_enable_pins_default: main-pcie-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
 	main_uart1_pins_default: main-uart1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
@@ -283,17 +971,6 @@
 		>;
 	};
 
-	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
-			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
-			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
-			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
-			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
-			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
-		>;
-	};
-
 	dss_vout1_pins_default: dss-vout1-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
@@ -339,6 +1016,43 @@
 			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
 		>;
 	};
+
+	icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+			AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+		>;
+	};
+
+	icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+			AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+			AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+			AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+			AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+			AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+			AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+			AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+			AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+			AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+			AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+			AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+			AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+			AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+			AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+			AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+			AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+			AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+			AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+			AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+			AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+		>;
+	};
 };
 
 &main_pmx1 {
@@ -355,12 +1069,6 @@
 			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
 		>;
 	};
-
-	ecap0_pins_default: ecap0-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
-		>;
-	};
 };
 
 &wkup_uart0 {
@@ -376,13 +1084,9 @@
 
 &mcu_uart0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_uart_pins_default>;
 };
 
 &main_gpio0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
 	gpio-line-names =
 		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
 		"", "", "", "", "", "", "", "", "", "",
@@ -392,10 +1096,14 @@
 		"", "IO9";
 };
 
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_pcie_enable_pins_default>;
+};
+
 &wkup_gpio0 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&arduino_io_d2_to_d3_pins_default>,
 		<&arduino_i2c_aio_switch_pins_default>,
 		<&arduino_io_oe_pins_default>,
 		<&push_button_pins_default>,
@@ -557,13 +1265,8 @@
 	status = "disabled";
 };
 
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins_default>;
-};
-
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
@@ -584,9 +1287,6 @@
 
 &mcu_spi0 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcu_spi0_pins_default>;
-
 	#address-cells = <1>;
 	#size-cells = <0>;
 	ti,pindir-d0-out-d1-in;
@@ -726,3 +1426,21 @@
 			<&mcu_r5fss0_core1_memory_region>;
 	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
 };
+
+&icssg0_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_mdio_pins_default>;
+
+	icssg0_eth0_phy: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg0_eth1_phy: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index c98068b6c..5b2d4365b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@4fa0000 {
@@ -471,6 +472,7 @@
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@100000 {
@@ -498,8 +500,8 @@
 		};
 
 		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
-			compatible = "syscon";
-			reg = <0x000041e0 0x14>;
+			compatible = "ti,am654-dss-oldi-io-ctrl", "syscon";
+			reg = <0x41e0 0x14>;
 		};
 
 		ehrpwm_tbclk: clock-controller@4140 {
@@ -600,7 +602,7 @@
 	};
 
 	main_navss: bus@30800000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
@@ -790,8 +792,12 @@
 			compatible = "ti,am654-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x10000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
@@ -1013,9 +1019,10 @@
 		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
 		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
 		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
-		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		      <0x0 0x04a0b000 0x0 0x1000>, /* vp2 */
+		      <0x0 0x04a01000 0x0 0x1000>; /* common1 */
 		reg-names = "common", "vidl1", "vid",
-			"ovr1", "ovr2", "vp1", "vp2";
+			"ovr1", "ovr2", "vp1", "vp2", "common1";
 
 		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
 
@@ -1151,6 +1158,18 @@
 			};
 		};
 
+		icssg0_iep0: iep@2e000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2e000 0x1000>;
+			clocks = <&icssg0_iepclk_mux>;
+		};
+
+		icssg0_iep1: iep@2f000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2f000 0x1000>;
+			clocks = <&icssg0_iepclk_mux>;
+		};
+
 		icssg0_mii_rt: mii-rt@32000 {
 			compatible = "ti,pruss-mii", "syscon";
 			reg = <0x32000 0x100>;
@@ -1293,6 +1312,18 @@
 			};
 		};
 
+		icssg1_iep0: iep@2e000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2e000 0x1000>;
+			clocks = <&icssg1_iepclk_mux>;
+		};
+
+		icssg1_iep1: iep@2f000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2f000 0x1000>;
+			clocks = <&icssg1_iepclk_mux>;
+		};
+
 		icssg1_mii_rt: mii-rt@32000 {
 			compatible = "ti,pruss-mii", "syscon";
 			reg = <0x32000 0x100>;
@@ -1435,6 +1466,18 @@
 			};
 		};
 
+		icssg2_iep0: iep@2e000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2e000 0x1000>;
+			clocks = <&icssg2_iepclk_mux>;
+		};
+
+		icssg2_iep1: iep@2f000 {
+			compatible = "ti,am654-icss-iep";
+			reg = <0x2f000 0x1000>;
+			clocks = <&icssg2_iepclk_mux>;
+		};
+
 		icssg2_mii_rt: mii-rt@32000 {
 			compatible = "ti,pruss-mii", "syscon";
 			reg = <0x32000 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 1e536dc41..ecd7356f3 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -185,7 +185,7 @@
 	};
 
 	mcu_navss: bus@28380000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
@@ -214,8 +214,12 @@
 			compatible = "ti,am654-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&inta_main_udmass>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index fd2b998eb..f037b3624 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x43000014 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am652.dtsi b/arch/arm64/boot/dts/ti/k3-am652.dtsi
new file mode 100644
index 000000000..0f22e00fa
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am652.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM65 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c02..1d6cddb11 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -9,6 +9,7 @@
  * Common bits of the IOT2050 Basic variant, PG1 and PG2
  */
 
+#include "k3-am652.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -17,21 +18,6 @@
 		/* 1G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
 	};
-
-	cpus {
-		cpu-map {
-			/delete-node/ cluster1;
-		};
-		/delete-node/ cpu@100;
-		/delete-node/ cpu@101;
-	};
-
-	/delete-node/ l2-cache1;
-};
-
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
 };
 
 &main_pmx0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index f5c26e9fb..822c288d2 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -369,6 +369,13 @@
 		ti,enable-vout-discharge;
 	};
 
+	gpio@38 {
+		compatible = "nxp,pca9554";
+		reg = <0x38>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	pca9554: gpio@39 {
 		compatible = "nxp,pca9554";
 		reg = <0x39>;
@@ -442,6 +449,7 @@
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -456,6 +464,7 @@
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
new file mode 100644
index 000000000..ec8cf20ca
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/icssg2-eth/ethernet-ports/port@0";
+		ethernet2 = "/icssg2-eth/ethernet-ports/port@1";
+	};
+
+	/* Ethernet node on PRU-ICSSG2 */
+	icssg2_eth: icssg2-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg2_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+		ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+			<&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,      /* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg2_mii_g_rt>;
+		ti,mii-rt = <&icssg2_mii_rt>;
+		ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+
+		interrupt-parent = <&icssg2_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+		       <&main_udmap 0xc301>, /* egress slice 0 */
+		       <&main_udmap 0xc302>, /* egress slice 0 */
+		       <&main_udmap 0xc303>, /* egress slice 0 */
+		       <&main_udmap 0xc304>, /* egress slice 1 */
+		       <&main_udmap 0xc305>, /* egress slice 1 */
+		       <&main_udmap 0xc306>, /* egress slice 1 */
+		       <&main_udmap 0xc307>, /* egress slice 1 */
+		       <&main_udmap 0x4300>, /* ingress slice 0 */
+		       <&main_udmap 0x4301>; /* ingress slice 1 */
+
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg2_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg2_phy0>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+			icssg2_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg2_phy1>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+
+	icssg2_mdio_pins_default: icssg2-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+			AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+		>;
+	};
+
+	icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+			AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+			AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+			AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+			AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+			AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+			AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+			AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+			AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+			AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+			AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+			AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+			AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+			AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+			AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+			AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+			AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+			AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+			AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+			AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+		>;
+	};
+};
+
+&icssg2_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg2_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	icssg2_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg2_phy1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
new file mode 100644
index 000000000..150428dfc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet3 = "/icssg0-eth/ethernet-ports/port@0";
+		ethernet4 = "/icssg0-eth/ethernet-ports/port@1";
+		ethernet5 = "/icssg1-eth/ethernet-ports/port@0";
+		ethernet6 = "/icssg1-eth/ethernet-ports/port@1";
+	};
+
+	/* Ethernet node on PRU-ICSSG0 */
+	icssg0_eth: icssg0-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg0_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+		ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg0_mii_g_rt>;
+		ti,mii-rt = <&icssg0_mii_rt>;
+		ti,iep = <&icssg0_iep0>,  <&icssg0_iep1>;
+
+		interrupt-parent = <&icssg0_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+		       <&main_udmap 0xc101>, /* egress slice 0 */
+		       <&main_udmap 0xc102>, /* egress slice 0 */
+		       <&main_udmap 0xc103>, /* egress slice 0 */
+		       <&main_udmap 0xc104>, /* egress slice 1 */
+		       <&main_udmap 0xc105>, /* egress slice 1 */
+		       <&main_udmap 0xc106>, /* egress slice 1 */
+		       <&main_udmap 0xc107>, /* egress slice 1 */
+
+		       <&main_udmap 0x4100>, /* ingress slice 0 */
+		       <&main_udmap 0x4101>, /* ingress slice 1 */
+		       <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+		       <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg0_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg0_phy0>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+			icssg0_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg0_phy1>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+
+	/* Ethernet node on PRU-ICSSG1 */
+	icssg1_eth: icssg1-eth {
+		compatible = "ti,am654-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg1_rgmii_pins_default>;
+		sram = <&msmc_ram>;
+		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ti,mii-g-rt = <&icssg1_mii_g_rt>;
+		ti,mii-rt = <&icssg1_mii_rt>;
+		ti,iep = <&icssg1_iep0>,  <&icssg1_iep1>;
+
+		interrupt-parent = <&icssg1_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+
+		dmas = <&main_udmap 0xc200>, /* egress slice 0 */
+		       <&main_udmap 0xc201>, /* egress slice 0 */
+		       <&main_udmap 0xc202>, /* egress slice 0 */
+		       <&main_udmap 0xc203>, /* egress slice 0 */
+		       <&main_udmap 0xc204>, /* egress slice 1 */
+		       <&main_udmap 0xc205>, /* egress slice 1 */
+		       <&main_udmap 0xc206>, /* egress slice 1 */
+		       <&main_udmap 0xc207>, /* egress slice 1 */
+
+		       <&main_udmap 0x4200>, /* ingress slice 0 */
+		       <&main_udmap 0x4201>, /* ingress slice 1 */
+		       <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */
+		       <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+			    "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+			    "rx0", "rx1";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg1_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg1_phy0>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4110>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+			icssg1_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg1_phy1>;
+				phy-mode = "rgmii-id";
+				ti,syscon-rgmii-delay = <&scm_conf 0x4114>;
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+
+	icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+			AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+		>;
+	};
+
+	icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+			AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+			AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+			AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+			AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+			AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+			AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+			AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+			AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+			AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+			AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+			AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+			AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+			AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+			AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+			AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+			AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+			AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+			AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+			AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+			AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+		>;
+	};
+
+	icssg0_iep0_pins_default: icssg0-iep0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0240, PIN_INPUT, 2) /* (U24) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+		>;
+	};
+
+	icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0180, PIN_INPUT, 0) /* (AD18) PRG1_MDIO0_MDIO */
+			AM65X_IOPAD(0x0184, PIN_OUTPUT, 0) /* (AH18) PRG1_MDIO0_MDC */
+		>;
+	};
+
+	icssg1_rgmii_pins_default: icssg1-rgmii-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0130, PIN_INPUT, 2) /* (AH24) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+			AM65X_IOPAD(0x0134, PIN_INPUT, 2) /* (AH23) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+			AM65X_IOPAD(0x0138, PIN_INPUT, 2) /* (AG21) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+			AM65X_IOPAD(0x013c, PIN_INPUT, 2) /* (AH22) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+			AM65X_IOPAD(0x0160, PIN_OUTPUT, 2) /* (AE20) PRG1_PRU1_GPO12.PRG1_RGMII2_TD0 */
+			AM65X_IOPAD(0x0164, PIN_OUTPUT, 2) /* (AF19) PRG1_PRU1_GPO13.PRG1_RGMII2_TD1 */
+			AM65X_IOPAD(0x0168, PIN_OUTPUT, 2) /* (AH19) PRG1_PRU1_GPO14.PRG1_RGMII2_TD2 */
+			AM65X_IOPAD(0x016c, PIN_OUTPUT, 2) /* (AG19) PRG1_PRU1_GPO15.PRG1_RGMII2_TD3 */
+			AM65X_IOPAD(0x0170, PIN_INPUT, 2) /* (AE19) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+			AM65X_IOPAD(0x015c, PIN_OUTPUT, 2) /* (AC20) PRG1_PRU1_GPO11.PRG1_RGMII2_TX_CTL */
+			AM65X_IOPAD(0x0148, PIN_INPUT, 2) /* (AG22) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+			AM65X_IOPAD(0x0140, PIN_INPUT, 2) /* (AE21) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+
+			AM65X_IOPAD(0x00e0, PIN_INPUT, 2) /* (AE22) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM65X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AG24) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM65X_IOPAD(0x00e8, PIN_INPUT, 2) /* (AF23) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM65X_IOPAD(0x00ec, PIN_INPUT, 2) /* (AD21) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM65X_IOPAD(0x0110, PIN_OUTPUT, 2) /* (AH20) PRG1_PRU0_GPO12.PRG1_RGMII1_TD0 */
+			AM65X_IOPAD(0x0114, PIN_OUTPUT, 2) /* (AH21) PRG1_PRU0_GPO13.PRG1_RGMII1_TD1 */
+			AM65X_IOPAD(0x0118, PIN_OUTPUT, 2) /* (AG20) PRG1_PRU0_GPO14.PRG1_RGMII1_TD2 */
+			AM65X_IOPAD(0x011c, PIN_OUTPUT, 2) /* (AD19) PRG1_PRU0_GPO15.PRG1_RGMII1_TD3 */
+			AM65X_IOPAD(0x0120, PIN_INPUT, 2) /* (AD20) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+			AM65X_IOPAD(0x010c, PIN_OUTPUT, 2) /* (AF21) PRG1_PRU0_GPO11.PRG1_RGMII1_TX_CTL */
+			AM65X_IOPAD(0x00f8, PIN_INPUT, 2) /* (AF22) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM65X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AG23) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+		>;
+	};
+
+	icssg1_iep0_pins_default: icssg1-iep0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
+		>;
+	};
+};
+
+&icssg0_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	icssg0_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg0_phy1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&icssg0_iep0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&icssg1_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	icssg1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	icssg1_phy1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&icssg1_iep0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_iep0_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494b1..3864ec54e 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 
+#include "k3-am654.dtsi"
 #include "k3-am65-iot2050-common.dtsi"
 
 / {
@@ -43,6 +44,7 @@
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index 774eb14ac..bd6f2e696 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -27,12 +27,6 @@
 };
 
 &main_pmx0 {
-	main_m2_enable_pins_default: main-m2-enable-default-pins {
-		pinctrl-single,pins = <
-			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
-		>;
-	};
-
 	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
@@ -66,15 +60,13 @@
 
 &main_gpio0 {
 	pinctrl-names = "default";
-	pinctrl-0 =
-		<&main_m2_pcie_mux_control>,
-		<&arduino_io_d4_to_d9_pins_default>;
+	pinctrl-0 = <&main_m2_pcie_mux_control>;
 };
 
 &main_gpio1 {
 	pinctrl-names = "default";
 	pinctrl-0 =
-		<&main_m2_enable_pins_default>,
+		<&main_pcie_enable_pins_default>,
 		<&main_pmx0_m2_config_pins_default>,
 		<&main_pmx1_m2_config_pins_default>,
 		<&cp2102n_reset_pin_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 5df594668..d0cfdeac2 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -31,6 +31,7 @@
 		can1 = &mcu_mcan1;
 		can2 = &main_mcan6;
 		can3 = &main_mcan7;
+		ethernet0 = &cpsw_port1;
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
@@ -553,3 +554,59 @@
 		};
 	};
 };
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J721S2_SERDES0_LANE2_USB_SWAP>, <J721S2_SERDES0_LANE3_USB>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_usb_link: phy@2 {
+		status = "okay";
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 10 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&usb_serdes_mux {
+	idle-states = <0>; /* USB0 to SERDES lane 2 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 6c9139f73..20861a0a4 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -25,6 +25,108 @@
 			reg = <0x00 0x9e800000 0x00 0x01800000>;
 			no-map;
 		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a8000000 {
+			reg = <0x00 0xa8000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
 	};
 };
 
@@ -49,3 +151,109 @@
 		reg = <0x51>;
 	};
 };
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 069937091..c8fb9dfb8 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -47,6 +47,150 @@
 			reg = <0x00 0x9e800000 0x00 0x01800000>;
 			no-map;
 		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a9100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_2_memory_region: c71-memory@aa100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_3_memory_region: c71-memory@ab100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab100000 0x00 0xf00000>;
+			no-map;
+		};
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
@@ -107,6 +251,76 @@
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
 	};
+
+	dp0_pwr_3v3: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pwr_en_pins_default>;
+		gpio = <&main_gpio0 4 0>;	/* DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: connector-dp0 {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+		ddc-i2c-bus = <&mcu_i2c1>;
+		hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;	/* HDMI_HPD */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	bridge-dvi {
+		compatible = "ti,tfp410";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_pdn_pins_default>;
+		powerdown-gpios = <&wkup_gpio0 14 GPIO_ACTIVE_LOW>;	/* HDMI_PDn */
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi1_out0>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_pmx0 {
@@ -164,10 +378,68 @@
 			J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */
 		>;
 	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x014, PIN_INPUT, 13) /* (AG33) MCAN14_TX.DP0_HPD */
+		>;
+	};
+
+	dp_pwr_en_pins_default: dp-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x010, PIN_INPUT, 7) /* (AH33) MCAN13_RX.GPIO0_4 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x074, PIN_OUTPUT, 2) /* (AC33) MCAN2_TX.VOUT0_DATA0 */
+			J784S4_IOPAD(0x070, PIN_OUTPUT, 2) /* (AH38) MCAN1_RX.VOUT0_DATA1 */
+			J784S4_IOPAD(0x07c, PIN_OUTPUT, 2) /* (AJ38) MCASP0_AXR3.VOUT0_DATA2 */
+			J784S4_IOPAD(0x068, PIN_OUTPUT, 2) /* (AE38) MCAN0_RX.VOUT0_DATA3 */
+			J784S4_IOPAD(0x064, PIN_OUTPUT, 2) /* (AF38) MCAN0_TX.VOUT0_DATA4 */
+			J784S4_IOPAD(0x060, PIN_OUTPUT, 2) /* (AE36) MCASP2_AXR1.VOUT0_DATA5 */
+			J784S4_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AC36) MCASP2_AXR0.VOUT0_DATA6 */
+			J784S4_IOPAD(0x058, PIN_OUTPUT, 2) /* (AE37) MCASP2_AFSX.VOUT0_DATA7 */
+			J784S4_IOPAD(0x054, PIN_OUTPUT, 2) /* (AD37) MCASP2_ACLKX.VOUT0_DATA8 */
+			J784S4_IOPAD(0x050, PIN_OUTPUT, 2) /* (AC37) MCASP1_AXR2.VOUT0_DATA9 */
+			J784S4_IOPAD(0x04c, PIN_OUTPUT, 2) /* (AC32) MCASP1_AXR1.VOUT0_DATA10 */
+			J784S4_IOPAD(0x048, PIN_OUTPUT, 2) /* (AK33) MCASP0_AXR2.VOUT0_DATA11 */
+			J784S4_IOPAD(0x044, PIN_OUTPUT, 2) /* (AG37) MCASP0_AXR1.VOUT0_DATA12 */
+			J784S4_IOPAD(0x040, PIN_OUTPUT, 2) /* (AF37) MCASP0_AXR0.VOUT0_DATA13 */
+			J784S4_IOPAD(0x03c, PIN_OUTPUT, 2) /* (AK38) MCASP0_AFSX.VOUT0_DATA14 */
+			J784S4_IOPAD(0x038, PIN_OUTPUT, 2) /* (AK35) MCASP0_ACLKX.VOUT0_DATA15 */
+			J784S4_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AJ32) EXT_REFCLK1.VOUT0_DATA16 */
+			J784S4_IOPAD(0x030, PIN_OUTPUT, 2) /* (AK37) GPIO0_12.VOUT0_DATA17 */
+			J784S4_IOPAD(0x02c, PIN_OUTPUT, 2) /* (AL32) GPIO0_11.VOUT0_DATA18 */
+			J784S4_IOPAD(0x028, PIN_OUTPUT, 2) /* (AE33) MCAN16_RX.VOUT0_DATA19 */
+			J784S4_IOPAD(0x024, PIN_OUTPUT, 2) /* (AH34) MCAN16_TX.VOUT0_DATA20 */
+			J784S4_IOPAD(0x020, PIN_OUTPUT, 2) /* (AJ35) MCAN15_RX.VOUT0_DATA21 */
+			J784S4_IOPAD(0x01c, PIN_OUTPUT, 2) /* (AG34) MCAN15_TX.VOUT0_DATA22 */
+			J784S4_IOPAD(0x018, PIN_OUTPUT, 2) /* (AK36) MCAN14_RX.VOUT0_DATA23 */
+			J784S4_IOPAD(0x084, PIN_OUTPUT, 2) /* (AG38) MCASP0_AXR5.VOUT0_DE */
+			J784S4_IOPAD(0x080, PIN_OUTPUT, 2) /* (AK34) MCASP0_AXR4.VOUT0_HSYNC */
+			J784S4_IOPAD(0x078, PIN_OUTPUT, 2) /* (AH37) MCAN2_RX.VOUT0_PCLK */
+			J784S4_IOPAD(0x088, PIN_OUTPUT, 2) /* (AF36) MCASP0_AXR6.VOUT0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x000, PIN_INPUT, 7) /* (AN35) EXTINTN.GPIO0_0 */
+		>;
+	};
 };
 
 &wkup_pmx2 {
 	bootph-all;
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7)
+		>;
+	};
+
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -238,6 +510,21 @@
 			J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */
 		>;
 	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			/* (L35) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J784S4_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0)
+			/* (L34) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J784S4_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0)
+		>;
+	};
+
+	hdmi_pdn_pins_default: hdmi-pdn-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 7) /* (H37) WKUP_GPIO0_14 */
+		>;
+	};
 };
 
 &wkup_pmx3 {
@@ -248,6 +535,90 @@
 	};
 };
 
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
 &wkup_uart0 {
 	/* Firmware usage */
 	status = "reserved";
@@ -267,6 +638,93 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <83 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -307,7 +765,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+		gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
 				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
 				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
 				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
@@ -362,3 +820,171 @@
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&mcu_phy0>;
 };
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2_core0 {
+	mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	mboxes = <&mailbox0_cluster3>, <&mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5>, <&mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
+
+&c71_3 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5>, <&mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+};
+
+&wkup_gpio_intr {
+	status = "okay";
+};
+
+&mcu_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&serdes_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+	assigned-clocks = <&k3_clks 218 2>,
+			  <&k3_clks 218 5>;
+	assigned-clock-parents = <&k3_clks 218 3>,
+				 <&k3_clks 218 7>;
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+	serdes4_dp_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+	};
+};
+
+&mhdp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+	phys = <&serdes4_dp_link>;
+	phy-names = "dpphy";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* DP */
+	port@0 {
+		reg = <0>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	/* HDMI */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
+
+&dp0_ports {
+
+	port@0 {
+		reg = <0>;
+
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		dp0_out: endpoint {
+			remote-endpoint = <&dp0_connector_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index cee2b4b0e..7a0c599f2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -91,24 +91,25 @@
 };
 
 &wkup_pmx0 {
+};
+
+&wkup_pmx2 {
 	mcu_uart0_pins_default: mcu-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
-			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
-			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
-			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x90, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0x94, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0x8c, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0x88, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
 		>;
 	};
 
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
-			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0x4c, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
 		>;
 	};
-};
 
-&wkup_pmx2 {
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
@@ -210,7 +211,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_uart0_pins_default>;
-	clock-frequency = <96000000>;
 };
 
 &main_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index cdb1d6b2a..da67bf8fe 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -91,7 +91,7 @@
 	};
 
 	main_navss: bus@30000000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
@@ -281,8 +281,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x100000>,
-			      <0x00 0x35000000 0x00 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x100000>,
+			      <0x00 0x30b00000 0x00 0x4000>,
+			      <0x00 0x30c00000 0x00 0x4000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -647,6 +651,7 @@
 		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,strobe-sel = <0x77>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6ffaf85fa..60b26374a 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -178,9 +178,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
@@ -318,7 +325,7 @@
 	};
 
 	mcu_navss: bus@28380000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
@@ -346,8 +353,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -637,4 +648,11 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	mcu_esm: esm@40800000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x40800000 0x00 0x1000>;
+		ti,esm-pins = <95>;
+		bootph-pre-ram;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 5a300d4c8..ea47f10d3 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -127,6 +127,14 @@
 	};
 };
 
+&wkup_pmx3 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */
+		>;
+	};
+};
+
 &main_pmx0 {
 	main_i2c0_pins_default: main-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -264,6 +272,151 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659414: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1: buck1 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka2: buck2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876441: pmic@4c {
+		compatible = "ti,lp8764-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+
+		regulators: regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				bootph-pre-ram;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_core_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
new file mode 100644
index 000000000..0c82a13b6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie0_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index f6c7e1614..2569b4c08 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -181,7 +181,7 @@
 	};
 
 	main_navss: bus@30000000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
@@ -382,8 +382,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x100000>,
-			      <0x0 0x35000000 0x0 0x100000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x100000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x10000>,
+			      <0x0 0x30d00000 0x0 0x8000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 05d6ef127..c463e23ce 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -48,9 +48,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x0 0x43000014 0x0 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
@@ -346,9 +353,9 @@
 
 		hbmc_mux: mux-controller@47000004 {
 			compatible = "reg-mux";
-			reg = <0x00 0x47000004 0x00 0x2>;
+			reg = <0x00 0x47000004 0x00 0x4>;
 			#mux-control-cells = <1>;
-			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+			mux-reg-masks = <0x0 0x2>; /* HBMC select */
 		};
 
 		hbmc: hyperbus@47034000 {
@@ -440,7 +447,7 @@
 	};
 
 	mcu_navss: bus@28380000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
@@ -468,8 +475,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -671,4 +682,11 @@
 		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	mcu_esm: esm@40800000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x40800000 0x00 0x1000>;
+		ti,esm-pins = <95>;
+		bootph-pre-ram;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 42fe8eee9..658764f7d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -459,6 +459,12 @@
 };
 
 &wkup_pmx0 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
 	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
@@ -560,6 +566,151 @@
 		compatible = "atmel,24c512";
 		reg = <0x51>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck123-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka123: buck123 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 7f0686c2c..a75611eec 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -152,6 +152,12 @@
 		>;
 	};
 
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
 		pinctrl-single,pins = <
 			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
@@ -199,6 +205,160 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_phyio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd1_lpddr4_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659411: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_sd_dv";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_usb_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &ospi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c6b85bbf9..1ba1f53c7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -190,8 +190,6 @@
 &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
new file mode 100644
index 000000000..43568eb67
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
+ * J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/*
+ * Since Root Complex and Endpoint modes are mutually exclusive
+ * disable Root Complex mode.
+ */
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 084f8f5b6..ea7f2b2ab 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -766,6 +766,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -775,7 +776,7 @@
 	};
 
 	main_navss: bus@30000000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
@@ -807,6 +808,7 @@
 			ti,sci = <&sms>;
 			ti,sci-dev-id = <265>;
 			ti,interrupt-ranges = <0 0 256>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
 		};
 
 		secure_proxy_main: mailbox@32c00000 {
@@ -1085,8 +1087,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x0 0x31150000 0x0 0x100>,
 			      <0x0 0x34000000 0x0 0x80000>,
-			      <0x0 0x35000000 0x0 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x35000000 0x0 0x200000>,
+			      <0x0 0x30b00000 0x0 0x20000>,
+			      <0x0 0x30c00000 0x0 0x8000>,
+			      <0x0 0x30d00000 0x0 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -1103,6 +1109,22 @@
 			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
 		};
 
+		main_bcdma_csi: dma-controller@311a0000 {
+			compatible = "ti,j721s2-dmss-bcdma-csi";
+			reg = <0x00 0x311a0000 0x00 0x100>,
+			      <0x00 0x35d00000 0x00 0x20000>,
+			      <0x00 0x35c00000 0x00 0x10000>,
+			      <0x00 0x35e00000 0x00 0x80000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <3>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <225>;
+			ti,sci-rm-range-rchan = <0x21>;
+			ti,sci-rm-range-tchan = <0x22>;
+			status = "disabled";
+		};
+
 		cpts@310d0000 {
 			compatible = "ti,j721e-cpts";
 			reg = <0x0 0x310d0000 0x0 0x400>;
@@ -1695,4 +1717,217 @@
 		dss_ports: ports {
 		};
 	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <279>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 279 1>;
+			firmware-name = "j721s2-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5d00000 0x00010000>,
+			      <0x5d10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <280>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 280 1>;
+			firmware-name = "j721s2-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5e00000 0x00010000>,
+			      <0x5e10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <281>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 281 1>;
+			firmware-name = "j721s2-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5f00000 0x00010000>,
+			      <0x5f10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <282>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 282 1>;
+			firmware-name = "j721s2-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <8>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 8 1>;
+		firmware-name = "j721s2-c71_0-fw";
+		status = "disabled";
+	};
+
+	c71_1: dsp@65800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x65800000 0x00 0x00080000>,
+		      <0x00 0x65e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <11>;
+		ti,sci-proc-ids = <0x31 0xff>;
+		resets = <&k3_reset 11 1>;
+		firmware-name = "j721s2-c71_1-fw";
+		status = "disabled";
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x700000 0x00 0x1000>;
+		ti,esm-pins = <688>, <689>;
+		bootph-pre-ram;
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2200000 0x00 0x100>;
+		clocks = <&k3_clks 286 1>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 286 1>;
+		assigned-clock-parents = <&k3_clks 286 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2210000 0x00 0x100>;
+		clocks = <&k3_clks 287 1>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 287 1>;
+		assigned-clock-parents = <&k3_clks 287 5>;
+	};
+
+	/*
+	 * The following RTI instances are coupled with MCU R5Fs, c7x and
+	 * GPU so keeping them reserved as these will be used by their
+	 * respective firmware
+	 */
+	watchdog2: watchdog@22f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x22f0000 0x00 0x100>;
+		clocks = <&k3_clks 290 1>;
+		power-domains = <&k3_pds 290 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 290 1>;
+		assigned-clock-parents = <&k3_clks 290 5>;
+		/* reserved for GPU */
+		status = "reserved";
+	};
+
+	watchdog3: watchdog@2300000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2300000 0x00 0x100>;
+		clocks = <&k3_clks 288 1>;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 288 1>;
+		assigned-clock-parents = <&k3_clks 288 5>;
+		/* reserved for C7X_0 */
+		status = "reserved";
+	};
+
+	watchdog4: watchdog@2310000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2310000 0x00 0x100>;
+		clocks = <&k3_clks 289 1>;
+		power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 289 1>;
+		assigned-clock-parents = <&k3_clks 289 5>;
+		/* reserved for C7X_1 */
+		status = "reserved";
+	};
+
+	watchdog5: watchdog@23c0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23c0000 0x00 0x100>;
+		clocks = <&k3_clks 291 1>;
+		power-domains = <&k3_pds 291 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 291 1>;
+		assigned-clock-parents = <&k3_clks 291 5>;
+		/* reserved for MAIN_R5F0_0 */
+		status = "reserved";
+	};
+
+	watchdog6: watchdog@23d0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23d0000 0x00 0x100>;
+		clocks = <&k3_clks 292 1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 292 1>;
+		assigned-clock-parents = <&k3_clks 292 5>;
+		/* reserved for MAIN_R5F0_1 */
+		status = "reserved";
+	};
+
+	watchdog7: watchdog@23e0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23e0000 0x00 0x100>;
+		clocks = <&k3_clks 293 1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 293 1>;
+		assigned-clock-parents = <&k3_clks 293 5>;
+		/* reserved for MAIN_R5F1_0 */
+		status = "reserved";
+	};
+
+	watchdog8: watchdog@23f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23f0000 0x00 0x100>;
+		clocks = <&k3_clks 294 1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 294 1>;
+		assigned-clock-parents = <&k3_clks 294 5>;
+		/* reserved for MAIN_R5F1_1 */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 2ddad9318..a47cb557d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -34,9 +34,16 @@
 		};
 	};
 
-	chipid@43000014 {
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+	wkup_conf: bus@43000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -443,7 +450,7 @@
 	};
 
 	mcu_navss: bus@28380000 {
-		compatible = "simple-mfd";
+		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
@@ -471,8 +478,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x0 0x285c0000 0x0 0x100>,
 			      <0x0 0x2a800000 0x0 0x40000>,
-			      <0x0 0x2aa00000 0x0 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x0 0x2aa00000 0x0 0x40000>,
+			      <0x0 0x284a0000 0x0 0x4000>,
+			      <0x0 0x284c0000 0x0 0x4000>,
+			      <0x0 0x28400000 0x0 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -652,7 +663,87 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x0 0x350>,
 		      <0x00 0x42050000 0x0 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 180 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <284>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 284 1>;
+			firmware-name = "j721s2-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41400000 0x00010000>,
+			      <0x41410000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <285>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 285 1>;
+			firmware-name = "j721s2-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_esm: esm@40800000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x40800000 0x00 0x1000>;
+		ti,esm-pins = <95>;
+		bootph-pre-ram;
+	};
+
+	wkup_esm: esm@42080000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x42080000 0x00 0x1000>;
+		ti,esm-pins = <63>;
+		bootph-pre-ram;
+	};
+
+	/*
+	 * The 2 RTI instances are couple with MCU R5Fs so keeping them
+	 * reserved as these will be used by their respective firmware
+	 */
+	mcu_watchdog0: watchdog@40600000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x40600000 0x00 0x100>;
+		clocks = <&k3_clks 295 1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 295 1>;
+		assigned-clock-parents = <&k3_clks 295 5>;
+		/* reserved for MCU_R5F0_0 */
+		status = "reserved";
+	};
+
+	mcu_watchdog1: watchdog@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x40610000 0x00 0x100>;
+		clocks = <&k3_clks 296 1>;
+		power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 296 1>;
+		assigned-clock-parents = <&k3_clks 296 5>;
+		/* reserved for MCU_R5F0_1 */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index a4006f328..da3237b23 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -29,6 +29,108 @@
 			alignment = <0x1000>;
 			no-map;
 		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a8000000 {
+			reg = <0x00 0xa8000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
 	};
 
 	mux0: mux-controller {
@@ -70,6 +172,15 @@
 	};
 };
 
+&wkup_pmx1 {
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx2 {
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		pinctrl-single,pins = <
@@ -106,6 +217,190 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659411: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck1234-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka1234: buck1234 {
+				regulator-name = "vdd_cpu_avs";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				bootph-pre-ram;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuwk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcu_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	tps659414: pmic@4c {
+		compatible = "ti,tps6594-q1";
+		reg = <0x4c>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1-supply = <&vsys_3v3>;
+		buck2-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			buckb1: buck1 {
+				regulator-name = "vdd_io_1v8_reg";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buckb2: buck2 {
+				regulator-name = "vdd_fpd_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb3: buck3 {
+				regulator-name = "vdd_phy_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb4: buck4 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buckb5: buck5 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob1: ldo1 {
+				regulator-name = "vdd_wk_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob2: ldo2 {
+				regulator-name = "vdd_gpioret_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob3: ldo3 {
+				regulator-name = "vda_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldob4: ldo4 {
+				regulator-name = "vda_pll_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lp876411: pmic@58 {
+		compatible = "ti,lp8764-q1";
+		reg = <0x58>;
+		system-power-controller;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		buck1234-supply = <&vsys_3v3>;
+
+		regulators {
+			buckc1234: buck1234 {
+				regulator-name = "vdd_core_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &main_i2c0 {
@@ -151,3 +446,109 @@
 		cdns,read-delay = <4>;
 	};
 };
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 5991c2e1d..33795a0bc 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -249,6 +249,32 @@
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
 	};
+
+	dp0_pwr_3v3: regulator-dp0-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	dp0: connector-dp0 {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
 };
 
 &main_pmx0 {
@@ -289,6 +315,19 @@
 			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
 		>;
 	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0cc, PIN_INPUT, 12) /* (AM37) SPI0_CS0.DP0_HPD */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AG33) MCAN14_TX.I2C4_SCL */
+			J784S4_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AH33) MCAN13_RX.I2C4_SDA */
+		>;
+	};
 };
 
 &wkup_pmx2 {
@@ -296,8 +335,6 @@
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
 			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
 			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
@@ -372,6 +409,17 @@
 	};
 };
 
+&wkup_pmx1 {
+	status = "okay";
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			/* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7)
+		>;
+	};
+};
+
 &wkup_pmx0 {
 	bootph-all;
 	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
@@ -436,6 +484,93 @@
 		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
+
+	tps659413: pmic@48 {
+		compatible = "ti,tps6594-q1";
+		reg = <0x48>;
+		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ti,primary-pmic;
+		buck12-supply = <&vsys_3v3>;
+		buck3-supply = <&vsys_3v3>;
+		buck4-supply = <&vsys_3v3>;
+		buck5-supply = <&vsys_3v3>;
+		ldo1-supply = <&vsys_3v3>;
+		ldo2-supply = <&vsys_3v3>;
+		ldo3-supply = <&vsys_3v3>;
+		ldo4-supply = <&vsys_3v3>;
+
+		regulators {
+			bucka12: buck12 {
+				regulator-name = "vdd_ddr_1v1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka3: buck3 {
+				regulator-name = "vdd_ram_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka4: buck4 {
+				regulator-name = "vdd_io_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bucka5: buck5 {
+				regulator-name = "vdd_mcu_0v85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa1: ldo1 {
+				regulator-name = "vdd_mcuio_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa2: ldo2 {
+				regulator-name = "vdd_mcuio_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa3: ldo3 {
+				regulator-name = "vds_dll_0v8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldoa4: ldo4 {
+				regulator-name = "vda_mcu_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &mcu_uart0 {
@@ -862,3 +997,85 @@
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
+
+&serdes_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&dss {
+	status = "okay";
+	assigned-clocks = <&k3_clks 218 2>,
+			  <&k3_clks 218 5>,
+			  <&k3_clks 218 14>,
+			  <&k3_clks 218 18>;
+	assigned-clock-parents = <&k3_clks 218 3>,
+				 <&k3_clks 218 7>,
+				 <&k3_clks 218 16>,
+				 <&k3_clks 218 22>;
+};
+
+&serdes_wiz4 {
+	status = "okay";
+};
+
+&serdes4 {
+	status = "okay";
+	serdes4_dp_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <4>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		resets = <&serdes_wiz4 1>, <&serdes_wiz4 2>,
+			 <&serdes_wiz4 3>, <&serdes_wiz4 4>;
+	};
+};
+
+&mhdp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+	phys = <&serdes4_dp_link>;
+	phy-names = "dpphy";
+};
+
+&dss_ports {
+	/* DP */
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dp0_ports {
+	port@0 {
+		reg = <0>;
+
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		dp0_out: endpoint {
+			remote-endpoint = <&dp0_connector_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index efed2d683..56c8eaad6 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -5,6 +5,21 @@
  * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+#include "k3-serdes.h"
+
+/ {
+	serdes_refclk: clock-serdes {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		/* To be enabled when serdes_wiz* is functional */
+		status = "disabled";
+	};
+};
+
 &cbass_main {
 	msmc_ram: sram@70000000 {
 		compatible = "mmio-sram";
@@ -26,6 +41,42 @@
 		};
 	};
 
+	scm_conf: bus@100000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "reg-mux";
+			reg = <0x00004080 0x30>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x3>, <0x4 0x3>, /* SERDES0 lane0/1 select */
+					<0x8 0x3>, <0xc 0x3>, /* SERDES0 lane2/3 select */
+					<0x10 0x3>, <0x14 0x3>, /* SERDES1 lane0/1 select */
+					<0x18 0x3>, <0x1c 0x3>, /* SERDES1 lane2/3 select */
+					<0x20 0x3>, <0x24 0x3>, /* SERDES2 lane0/1 select */
+					<0x28 0x3>, <0x2c 0x3>; /* SERDES2 lane2/3 select */
+			idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
+				      <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+				      <J784S4_SERDES0_LANE2_IP3_UNUSED>,
+				      <J784S4_SERDES0_LANE3_USB>,
+				      <J784S4_SERDES1_LANE0_PCIE0_LANE0>,
+				      <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+				      <J784S4_SERDES1_LANE2_PCIE0_LANE2>,
+				      <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+				      <J784S4_SERDES2_LANE0_IP2_UNUSED>,
+				      <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+				      <J784S4_SERDES2_LANE2_QSGMII_LANE1>,
+				      <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+				      <J784S4_SERDES4_LANE0_EDP_LANE0>,
+				      <J784S4_SERDES4_LANE1_EDP_LANE1>,
+				      <J784S4_SERDES4_LANE2_EDP_LANE2>,
+				      <J784S4_SERDES4_LANE3_EDP_LANE3>;
+		};
+	};
+
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
 		#address-cells = <2>;
@@ -661,6 +712,7 @@
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
@@ -669,6 +721,160 @@
 		status = "disabled";
 	};
 
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 404 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 404 2>, <&k3_clks 404 6>, <&serdes_refclk>, <&k3_clks 404 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 404 6>;
+		assigned-clock-parents = <&k3_clks 404 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x5060000 0x00 0x5060000 0x10000>;
+		status = "disabled";
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 404 6>,
+						 <&k3_clks 404 6>,
+						 <&k3_clks 404 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	serdes_wiz1: wiz@5070000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 405 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 405 2>, <&k3_clks 405 6>, <&serdes_refclk>, <&k3_clks 405 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 405 6>;
+		assigned-clock-parents = <&k3_clks 405 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05070000 0x00 0x05070000 0x10000>;
+		status = "disabled";
+
+		serdes1: serdes@5070000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05070000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz1 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz1 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz1 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz1 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 405 6>,
+						 <&k3_clks 405 6>,
+						 <&k3_clks 405 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 406 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 406 2>, <&k3_clks 406 6>, <&serdes_refclk>, <&k3_clks 406 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 406 6>;
+		assigned-clock-parents = <&k3_clks 406 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05020000 0x00 0x05020000 0x10000>;
+		status = "disabled";
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05020000 0x010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz2 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz2 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz2 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz2 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz2 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 406 6>,
+						 <&k3_clks 406 6>,
+						 <&k3_clks 406 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
+	serdes_wiz4: wiz@5050000 {
+		compatible = "ti,j784s4-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 407 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 407 2>, <&k3_clks 407 6>, <&serdes_refclk>, <&k3_clks 407 5>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk", "core_ref1_clk";
+		assigned-clocks = <&k3_clks 407 6>;
+		assigned-clock-parents = <&k3_clks 407 10>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05050000 0x00 0x05050000 0x10000>,
+			 <0xa030a00 0x00 0xa030a00 0x40>; /* DPTX PHY */
+		status = "disabled";
+
+		serdes4: serdes@5050000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05050000 0x010000>,
+			      <0x0a030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz4 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 407 6>,
+						 <&k3_clks 407 6>,
+						 <&k3_clks 407 6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+	};
+
 	main_navss: bus@30000000 {
 		bootph-all;
 		compatible = "simple-bus";
@@ -703,6 +909,7 @@
 			ti,sci = <&sms>;
 			ti,sci-dev-id = <321>;
 			ti,interrupt-ranges = <0 0 256>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
 		};
 
 		secure_proxy_main: mailbox@32c00000 {
@@ -982,8 +1189,12 @@
 			compatible = "ti,j721e-navss-main-udmap";
 			reg = <0x00 0x31150000 0x00 0x100>,
 			      <0x00 0x34000000 0x00 0x80000>,
-			      <0x00 0x35000000 0x00 0x200000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x35000000 0x00 0x200000>,
+			      <0x00 0x30b00000 0x00 0x20000>,
+			      <0x00 0x30c00000 0x00 0x8000>,
+			      <0x00 0x30d00000 0x00 0x4000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -1000,6 +1211,22 @@
 			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
 		};
 
+		main_bcdma_csi: dma-controller@311a0000 {
+			compatible = "ti,j721s2-dmss-bcdma-csi";
+			reg = <0x00 0x311a0000 0x00 0x100>,
+			      <0x00 0x35d00000 0x00 0x20000>,
+			      <0x00 0x35c00000 0x00 0x10000>,
+			      <0x00 0x35e00000 0x00 0x80000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <3>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <281>;
+			ti,sci-rm-range-rchan = <0x21>;
+			ti,sci-rm-range-tchan = <0x22>;
+			status = "disabled";
+		};
+
 		cpts@310d0000 {
 			compatible = "ti,j721e-cpts";
 			reg = <0x00 0x310d0000 0x00 0x400>;
@@ -1568,4 +1795,279 @@
 		firmware-name = "j784s4-c71_3-fw";
 		status = "disabled";
 	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x700000 0x00 0x1000>;
+		ti,esm-pins = <688>, <689>, <690>, <691>, <692>, <693>, <694>,
+			      <695>;
+		bootph-pre-ram;
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2200000 0x00 0x100>;
+		clocks = <&k3_clks 348 1>;
+		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 348 0>;
+		assigned-clock-parents = <&k3_clks 348 4>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2210000 0x00 0x100>;
+		clocks = <&k3_clks 349 1>;
+		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 349 0>;
+		assigned-clock-parents = <&k3_clks 349 4>;
+	};
+
+	watchdog2: watchdog@2220000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2220000 0x00 0x100>;
+		clocks = <&k3_clks 350 1>;
+		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 350 0>;
+		assigned-clock-parents = <&k3_clks 350 4>;
+	};
+
+	watchdog3: watchdog@2230000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2230000 0x00 0x100>;
+		clocks = <&k3_clks 351 1>;
+		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 351 0>;
+		assigned-clock-parents = <&k3_clks 351 4>;
+	};
+
+	watchdog4: watchdog@2240000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2240000 0x00 0x100>;
+		clocks = <&k3_clks 352 1>;
+		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 352 0>;
+		assigned-clock-parents = <&k3_clks 352 4>;
+	};
+
+	watchdog5: watchdog@2250000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2250000 0x00 0x100>;
+		clocks = <&k3_clks 353 1>;
+		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 353 0>;
+		assigned-clock-parents = <&k3_clks 353 4>;
+	};
+
+	watchdog6: watchdog@2260000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2260000 0x00 0x100>;
+		clocks = <&k3_clks 354 1>;
+		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 354 0>;
+		assigned-clock-parents = <&k3_clks 354 4>;
+	};
+
+	watchdog7: watchdog@2270000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2270000 0x00 0x100>;
+		clocks = <&k3_clks 355 1>;
+		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 355 0>;
+		assigned-clock-parents = <&k3_clks 355 4>;
+	};
+
+	/*
+	 * The following RTI instances are coupled with MCU R5Fs, c7x and
+	 * GPU so keeping them reserved as these will be used by their
+	 * respective firmware
+	 */
+	watchdog8: watchdog@22f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x22f0000 0x00 0x100>;
+		clocks = <&k3_clks 360 1>;
+		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 360 0>;
+		assigned-clock-parents = <&k3_clks 360 4>;
+		/* reserved for GPU */
+		status = "reserved";
+	};
+
+	watchdog9: watchdog@2300000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2300000 0x00 0x100>;
+		clocks = <&k3_clks 356 1>;
+		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 356 0>;
+		assigned-clock-parents = <&k3_clks 356 4>;
+		/* reserved for C7X_0 DSP */
+		status = "reserved";
+	};
+
+	watchdog10: watchdog@2310000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2310000 0x00 0x100>;
+		clocks = <&k3_clks 357 1>;
+		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 357 0>;
+		assigned-clock-parents = <&k3_clks 357 4>;
+		/* reserved for C7X_1 DSP */
+		status = "reserved";
+	};
+
+	watchdog11: watchdog@2320000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2320000 0x00 0x100>;
+		clocks = <&k3_clks 358 1>;
+		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 358 0>;
+		assigned-clock-parents = <&k3_clks 358 4>;
+		/* reserved for C7X_2 DSP */
+		status = "reserved";
+	};
+
+	watchdog12: watchdog@2330000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2330000 0x00 0x100>;
+		clocks = <&k3_clks 359 1>;
+		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 359 0>;
+		assigned-clock-parents = <&k3_clks 359 4>;
+		/* reserved for C7X_3 DSP */
+		status = "reserved";
+	};
+
+	watchdog13: watchdog@23c0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23c0000 0x00 0x100>;
+		clocks = <&k3_clks 361 1>;
+		power-domains = <&k3_pds 361 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 361 0>;
+		assigned-clock-parents = <&k3_clks 361 4>;
+		/* reserved for MAIN_R5F0_0 */
+		status = "reserved";
+	};
+
+	watchdog14: watchdog@23d0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23d0000 0x00 0x100>;
+		clocks = <&k3_clks 362 1>;
+		power-domains = <&k3_pds 362 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 362 0>;
+		assigned-clock-parents = <&k3_clks 362 4>;
+		/* reserved for MAIN_R5F0_1 */
+		status = "reserved";
+	};
+
+	watchdog15: watchdog@23e0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23e0000 0x00 0x100>;
+		clocks = <&k3_clks 363 1>;
+		power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 363 0>;
+		assigned-clock-parents = <&k3_clks 363 4>;
+		/* reserved for MAIN_R5F1_0 */
+		status = "reserved";
+	};
+
+	watchdog16: watchdog@23f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x23f0000 0x00 0x100>;
+		clocks = <&k3_clks 364 1>;
+		power-domains = <&k3_pds 364 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 364 0>;
+		assigned-clock-parents = <&k3_clks 364 4>;
+		/* reserved for MAIN_R5F1_1 */
+		status = "reserved";
+	};
+
+	watchdog17: watchdog@2540000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2540000 0x00 0x100>;
+		clocks = <&k3_clks 365 1>;
+		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 365 0>;
+		assigned-clock-parents = <&k3_clks 366 4>;
+		/* reserved for MAIN_R5F2_0 */
+		status = "reserved";
+	};
+
+	watchdog18: watchdog@2550000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2550000 0x00 0x100>;
+		clocks = <&k3_clks 366 1>;
+		power-domains = <&k3_pds 366 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 366 0>;
+		assigned-clock-parents = <&k3_clks 366 4>;
+		/* reserved for MAIN_R5F2_1 */
+		status = "reserved";
+	};
+
+	mhdp: bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		reg = <0x0 0xa000000 0x0 0x30a00>,
+		      <0x0 0x4f40000 0x0 0x20>;
+		reg-names = "mhdptx", "j721e-intg";
+		clocks = <&k3_clks 217 11>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Remote-endpoints are on the boards so
+			 * ports are defined in the platform dt file.
+			 */
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+		clocks = <&k3_clks 218 0>,
+			 <&k3_clks 218 2>,
+			 <&k3_clks 218 5>,
+			 <&k3_clks 218 14>,
+			 <&k3_clks 218 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+		status = "disabled";
+
+		dss_ports: ports {
+			/* Ports that DSS drives are platform specific
+			 * so they are defined in platform dt file.
+			 */
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 4ab4018d3..337122c3f 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -38,10 +38,18 @@
 		};
 	};
 
-	chipid@43000014 {
+	wkup_conf: bus@43000000 {
 		bootph-all;
-		compatible = "ti,am654-chipid";
-		reg = <0x00 0x43000014 0x00 0x4>;
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
 	};
 
 	secure_proxy_sa3: mailbox@43600000 {
@@ -478,8 +486,12 @@
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
-			      <0x00 0x2aa00000 0x00 0x40000>;
-			reg-names = "gcfg", "rchanrt", "tchanrt";
+			      <0x00 0x2aa00000 0x00 0x40000>,
+			      <0x00 0x284a0000 0x00 0x4000>,
+			      <0x00 0x284c0000 0x00 0x4000>,
+			      <0x00 0x28400000 0x00 0x2000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt",
+				    "tchan", "rchan", "rflow";
 			msi-parent = <&main_udmass_inta>;
 			#dma-cells = <1>;
 
@@ -616,7 +628,7 @@
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0x42040000 0x00 0x350>,
 		      <0x00 0x42050000 0x00 0x350>;
-		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_SHARED>;
 		#thermal-sensor-cells = <1>;
 	};
 
@@ -700,4 +712,44 @@
 			status = "disabled";
 		};
 	};
+
+	mcu_esm: esm@40800000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x40800000 0x00 0x1000>;
+		ti,esm-pins = <95>;
+		bootph-pre-ram;
+	};
+
+	wkup_esm: esm@42080000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x42080000 0x00 0x1000>;
+		ti,esm-pins = <63>;
+		bootph-pre-ram;
+	};
+
+	/*
+	 * The 2 RTI instances are couple with MCU R5Fs so keeping them
+	 * reserved as these will be used by their respective firmware
+	 */
+	mcu_watchdog0: watchdog@40600000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x40600000 0x00 0x100>;
+		clocks = <&k3_clks 367 1>;
+		power-domains = <&k3_pds 367 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 367 0>;
+		assigned-clock-parents = <&k3_clks 367 4>;
+		/* reserved for MCU_R5F0_0 */
+		status = "reserved";
+	};
+
+	mcu_watchdog1: watchdog@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x40610000 0x00 0x100>;
+		clocks = <&k3_clks 368 1>;
+		power-domains = <&k3_pds 368 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 368 0>;
+		assigned-clock-parents = <&k3_clks 368 4>;
+		/* reserved for MCU_R5F0_1 */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
index 29167f85c..21b4886c4 100644
--- a/arch/arm64/boot/dts/ti/k3-serdes.h
+++ b/arch/arm64/boot/dts/ti/k3-serdes.h
@@ -111,7 +111,7 @@
 
 #define J721S2_SERDES0_LANE2_EDP_LANE2		0x0
 #define J721S2_SERDES0_LANE2_PCIE1_LANE2	0x1
-#define J721S2_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE2_USB_SWAP		0x2
 #define J721S2_SERDES0_LANE2_IP4_UNUSED		0x3
 
 #define J721S2_SERDES0_LANE3_EDP_LANE3		0x0
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index ae1b9b2bd..92f4190d5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -21,57 +21,57 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index b59e48be6..f88b71f5b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -16,58 +16,58 @@
 /dts-v1/;
 /plugin/;
 
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	/* u14 - 0x40 - ina260 */
-	/* u43 - 0x2d - usb5744 */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
-
-&amba {
-	si5332_0: si5332_0 { /* u17 */
+&{/} {
+	si5332_0: si5332-0 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
 
-	si5332_1: si5332_1 { /* u17 */
+	si5332_1: si5332-1 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	si5332_2: si5332_2 { /* u17 */
+	si5332_2: si5332-2 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
 
-	si5332_3: si5332_3 { /* u17 */
+	si5332_3: si5332-3 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24000000>;
 	};
 
-	si5332_4: si5332_4 { /* u17 */
+	si5332_4: si5332-4 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5332_5: si5332_5 { /* u17 */
+	si5332_5: si5332-5 { /* u17 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index c4774a42d..51622896b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -131,9 +131,7 @@
 &qspi { /* MIO 0-5 - U143 */
 	status = "okay";
 	spi_flash: flash@0 { /* MT25QU512A */
-		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		compatible = "jedec,spi-nor"; /* 64MB */
 		reg = <0>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
@@ -222,9 +220,9 @@
 				label = "Secure OS Storage";
 				reg = <0x2280000 0x20000>; /* 128KB */
 			};
-			partition@22A0000 {
+			partition@22a0000 {
 				label = "User";
-				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+				reg = <0x22a0000 0x1d60000>; /* 29.375 MB */
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index e821d55d8..73491626e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -98,8 +98,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem3_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index b59e11316..f767708fb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -91,12 +91,16 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem2_default>;
-	phy0: ethernet-phy@5 {
-		reg = <5>;
-		ti,rx-internal-delay = <0x8>;
-		ti,tx-internal-delay = <0xa>;
-		ti,fifo-depth = <0x1>;
-		ti,dp83867-rxctrl-strap-quirk;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@5 {
+			reg = <5>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 38b0a3121..f553b317e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -88,8 +88,12 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: ethernet-phy@0 { /* VSC8211 */
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 { /* VSC8211 */
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 6636e7654..6ec1d9813 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -116,17 +116,21 @@
 	status = "okay";
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethernet_phy0>;
-	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
-		reg = <0>;
-	};
-	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
-		reg = <7>;
-	};
-	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
-		reg = <3>;
-	};
-	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
-		reg = <8>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+			reg = <0>;
+		};
+		ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+			reg = <7>;
+		};
+		ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+			reg = <3>;
+		};
+		ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+			reg = <8>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index 0d2ea9c09..b1857e17a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -77,8 +77,12 @@
 	phy-mode = "rgmii-id";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gem1_default>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index d0091d3cb..52f998c22 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -123,13 +123,13 @@
 		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
 	};
 
-	si5335_0: si5335_0 { /* clk0_usb - u23 */
+	si5335_0: si5335-0 { /* clk0_usb - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
 
-	si5335_1: si5335_1 { /* clk1_dp - u23 */
+	si5335_1: si5335-1 { /* clk1_dp - u23 */
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd..eaba46680 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -129,7 +129,7 @@
 		};
 	};
 
-	zynqmp_ipi: zynqmp_ipi {
+	zynqmp_ipi: zynqmp-ipi {
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
@@ -141,6 +141,7 @@
 
 		ipi_mailbox_pmu1: mailbox@ff9905c0 {
 			bootph-all;
+			compatible = "xlnx,zynqmp-ipi-dest-mailbox";
 			reg = <0x0 0xff9905c0 0x0 0x20>,
 			      <0x0 0xff9905e0 0x0 0x20>,
 			      <0x0 0xff990e80 0x0 0x20>,
@@ -194,12 +195,12 @@
 				mbox-names = "tx", "rx";
 			};
 
-			nvmem_firmware {
+			nvmem-firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
 				#size-cells = <1>;
 
-				soc_revision: soc_revision@0 {
+				soc_revision: soc-revision@0 {
 					reg = <0x0 0x4>;
 				};
 			};
@@ -584,8 +585,6 @@
 				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
@@ -600,8 +599,6 @@
 				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
@@ -616,8 +613,6 @@
 				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
@@ -632,8 +627,6 @@
 				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index a789119e6..e6cf3e5d6 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -30,6 +30,9 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
+CONFIG_CRASH_DUMP=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
@@ -77,9 +80,6 @@ CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_FILE=y
-CONFIG_CRASH_DUMP=y
 CONFIG_XEN=y
 CONFIG_COMPAT=y
 CONFIG_RANDOMIZE_BASE=y
@@ -180,8 +180,6 @@ CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
 CONFIG_CAN=m
-CONFIG_CAN_M_CAN=m
-CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
 # CONFIG_BT_LE is not set
@@ -215,27 +213,27 @@ CONFIG_PCI_PASID=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR_HOST=y
-CONFIG_PCIE_RCAR_EP=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y
 CONFIG_PCIE_ALTERA_MSI=y
+CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_HOST_THUNDER_PEM=y
 CONFIG_PCI_HOST_THUNDER_ECAM=y
-CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCIE_MEDIATEK_GEN3=m
-CONFIG_PCIE_BRCMSTB=m
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_RCAR_EP=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCI_XGENE=y
 CONFIG_PCI_IMX6_HOST=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_ARMADA_8K=y
 CONFIG_PCIE_TEGRA194_HOST=m
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
 CONFIG_PCIE_VISCONTI_HOST=y
 CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_ENDPOINT=y
@@ -252,9 +250,11 @@ CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_INTEL_STRATIX10_SERVICE=y
 CONFIG_INTEL_STRATIX10_RSU=m
+CONFIG_MTK_ADSP_IPC=m
 CONFIG_EFI_CAPSULE_LOADER=y
 CONFIG_IMX_SCU=y
-CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_QSEECOM=y
+CONFIG_QCOM_QSEECOM_UEFISECAPP=y
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -276,15 +276,12 @@ CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=m
-CONFIG_UBIFS_FS=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=m
 CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_FASTRPC=m
-CONFIG_BATTERY_QCOM_BATTMGR=m
-CONFIG_UCSI_PMIC_GLINK=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
@@ -368,6 +365,7 @@ CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
 CONFIG_DWMAC_TEGRA=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_TI_ICSSG_PRUETH=m
 CONFIG_QCOM_IPA=m
 CONFIG_MESON_GXL_PHY=m
 CONFIG_AQUANTIA_PHY=y
@@ -384,6 +382,8 @@ CONFIG_DP83869_PHY=m
 CONFIG_DP83TD510_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_RCAR_CANFD=m
 CONFIG_CAN_MCP251XFD=m
@@ -423,6 +423,7 @@ CONFIG_MHI_WWAN_MBIM=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_ADC=m
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=m
 CONFIG_KEYBOARD_SNVS_PWRKEY=m
 CONFIG_KEYBOARD_IMX_SC_KEY=m
 CONFIG_KEYBOARD_CROS_EC=y
@@ -447,6 +448,7 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_BCM2835AUX=y
@@ -573,9 +575,9 @@ CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
-CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ8074=y
 CONFIG_PINCTRL_IPQ6018=y
 CONFIG_PINCTRL_IPQ9574=y
 CONFIG_PINCTRL_MSM8916=y
@@ -587,31 +589,37 @@ CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
 CONFIG_PINCTRL_QDF2XXX=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SC7280=y
-CONFIG_PINCTRL_SC7280_LPASS_LPI=m
 CONFIG_PINCTRL_SC8180X=y
 CONFIG_PINCTRL_SC8280XP=y
 CONFIG_PINCTRL_SDM660=y
 CONFIG_PINCTRL_SDM670=y
 CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SDX75=y
+CONFIG_PINCTRL_SM4450=y
 CONFIG_PINCTRL_SM6115=y
 CONFIG_PINCTRL_SM6125=y
 CONFIG_PINCTRL_SM6350=y
 CONFIG_PINCTRL_SM6375=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
-CONFIG_PINCTRL_SM8250_LPASS_LPI=m
 CONFIG_PINCTRL_SM8350=y
 CONFIG_PINCTRL_SM8450=y
+CONFIG_PINCTRL_SM8550=y
+CONFIG_PINCTRL_SM8650=y
+CONFIG_PINCTRL_X1E80100=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_LPASS_LPI=m
+CONFIG_PINCTRL_SC7280_LPASS_LPI=m
+CONFIG_PINCTRL_SM6115_LPASS_LPI=m
+CONFIG_PINCTRL_SM8250_LPASS_LPI=m
+CONFIG_PINCTRL_SM8350_LPASS_LPI=m
 CONFIG_PINCTRL_SM8450_LPASS_LPI=m
 CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
-CONFIG_PINCTRL_SM8550=y
 CONFIG_PINCTRL_SM8550_LPASS_LPI=m
-CONFIG_PINCTRL_LPASS_LPI=m
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
@@ -620,6 +628,7 @@ CONFIG_GPIO_MPC8XXX=y
 CONFIG_GPIO_MXC=y
 CONFIG_GPIO_PL061=y
 CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_GPIO_VISCONTI=y
 CONFIG_GPIO_WCD934X=m
@@ -631,7 +640,7 @@ CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
-CONFIG_GPIO_SYSCON=y
+CONFIG_GPIO_AGGREGATOR=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
@@ -639,6 +648,7 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_NVMEM_REBOOT_MODE=m
+CONFIG_BATTERY_QCOM_BATTMGR=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_BATTERY_MAX17042=m
@@ -663,14 +673,16 @@ CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_IMX_SC_THERMAL=m
 CONFIG_IMX8MM_THERMAL=m
-CONFIG_QORIQ_THERMAL=m
 CONFIG_K3_THERMAL=m
+CONFIG_QORIQ_THERMAL=m
 CONFIG_SUN8I_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
 CONFIG_RZG2L_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
+CONFIG_MTK_THERMAL=m
+CONFIG_MTK_LVTS_THERMAL=m
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
@@ -683,12 +695,14 @@ CONFIG_QCOM_SPMI_ADC_TM5=m
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_QCOM_LMH=m
 CONFIG_UNIPHIER_THERMAL=y
+CONFIG_KHADAS_MCU_FAN_THERMAL=m
 CONFIG_WATCHDOG=y
 CONFIG_SL28CPLD_WATCHDOG=m
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
+CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_SUNXI_WATCHDOG=m
 CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
@@ -704,7 +718,6 @@ CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
-CONFIG_K3_RTI_WATCHDOG=m
 CONFIG_MFD_ALTERA_SYSMGR=y
 CONFIG_MFD_BD9571MWV=y
 CONFIG_MFD_AXP20X_I2C=y
@@ -721,15 +734,18 @@ CONFIG_MFD_RK8XX_SPI=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_SL28CPLD=y
 CONFIG_RZ_MTU3=y
-CONFIG_MFD_TPS65219=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_TPS65219=y
+CONFIG_MFD_TPS6594_I2C=m
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
+CONFIG_MFD_KHADAS_MCU=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_BD718XX=y
 CONFIG_REGULATOR_BD9571MWV=y
 CONFIG_REGULATOR_CROS_EC=y
+CONFIG_REGULATOR_DA9211=m
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI6421V530=y
@@ -762,6 +778,8 @@ CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=m
 CONFIG_IR_MESON=m
 CONFIG_IR_SUNXI=m
+CONFIG_MEDIA_CEC_SUPPORT=y
+CONFIG_CEC_MESON_G12A_AO=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
@@ -774,6 +792,7 @@ CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_CADENCE_CSI2RX=m
 CONFIG_VIDEO_MEDIATEK_JPEG=m
 CONFIG_VIDEO_MEDIATEK_VCODEC=m
 CONFIG_VIDEO_IMX7_CSI=m
@@ -795,6 +814,7 @@ CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_TI_J721E_CSI2RX=m
 CONFIG_VIDEO_HANTRO=m
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_IMX412=m
@@ -835,6 +855,7 @@ CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_PANEL_EDP=m
+CONFIG_DRM_PANEL_ILITEK_ILI9882T=m
 CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
 CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
@@ -846,9 +867,11 @@ CONFIG_DRM_LONTIUM_LT9611UXC=m
 CONFIG_DRM_ITE_IT66121=m
 CONFIG_DRM_NWL_MIPI_DSI=m
 CONFIG_DRM_PARADE_PS8640=m
+CONFIG_DRM_SAMSUNG_DSIM=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_THINE_THC63LVD1024=m
+CONFIG_DRM_TOSHIBA_TC358767=m
 CONFIG_DRM_TOSHIBA_TC358768=m
 CONFIG_DRM_TI_TFP410=m
 CONFIG_DRM_TI_SN65DSI83=m
@@ -866,17 +889,19 @@ CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
 CONFIG_DRM_HISI_KIRIN=m
 CONFIG_DRM_MEDIATEK=m
+CONFIG_DRM_MEDIATEK_DP=m
 CONFIG_DRM_MEDIATEK_HDMI=m
 CONFIG_DRM_MXSFB=m
-CONFIG_DRM_MESON=m
 CONFIG_DRM_IMX_LCDIF=m
+CONFIG_DRM_MESON=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_DRM_TIDSS=m
+CONFIG_DRM_POWERVR=m
 CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_EFI=y
+CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_PWM=m
 CONFIG_BACKLIGHT_LP855X=m
 CONFIG_LOGO=y
@@ -902,6 +927,8 @@ CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
 CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
 CONFIG_SND_SOC_MT8192=m
 CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m
+CONFIG_SND_SOC_MT8195=m
+CONFIG_SND_SOC_MT8195_MT6359=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
@@ -909,6 +936,7 @@ CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_MSM8996=m
 CONFIG_SND_SOC_SDM845=m
 CONFIG_SND_SOC_SM8250=m
+CONFIG_SND_SOC_SC8280XP=m
 CONFIG_SND_SOC_SC7180=m
 CONFIG_SND_SOC_SC7280=m
 CONFIG_SND_SOC_ROCKCHIP=m
@@ -919,6 +947,10 @@ CONFIG_SND_SOC_RK3399_GRU_SOUND=m
 CONFIG_SND_SOC_SAMSUNG=y
 CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SOC_SOF_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_OF=y
+CONFIG_SND_SOC_SOF_MTK_TOPLEVEL=y
+CONFIG_SND_SOC_SOF_MT8195=m
 CONFIG_SND_SUN8I_CODEC=m
 CONFIG_SND_SUN8I_CODEC_ANALOG=m
 CONFIG_SND_SUN50I_CODEC_ANALOG=m
@@ -939,6 +971,7 @@ CONFIG_SND_SOC_TEGRA210_ADX=m
 CONFIG_SND_SOC_TEGRA210_MIXER=m
 CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m
 CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_AK4613=m
 CONFIG_SND_SOC_DA7213=m
 CONFIG_SND_SOC_ES7134=m
@@ -950,7 +983,6 @@ CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_RK817=m
 CONFIG_SND_SOC_RT5640=m
-CONFIG_SND_SOC_J721E_EVM=m
 CONFIG_SND_SOC_RT5659=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_SIMPLE_MUX=m
@@ -966,6 +998,8 @@ CONFIG_SND_SOC_WM8960=m
 CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_WSA883X=m
+CONFIG_SND_SOC_WSA884X=m
 CONFIG_SND_SOC_NAU8822=m
 CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
@@ -1031,16 +1065,21 @@ CONFIG_USB_CONFIGFS_RNDIS=y
 CONFIG_USB_CONFIGFS_EEM=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
+CONFIG_TYPEC_QCOM_PMIC=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_CCG=m
+CONFIG_UCSI_PMIC_GLINK=m
 CONFIG_TYPEC_TPS6598X=m
 CONFIG_TYPEC_HD3SS3220=m
-CONFIG_TYPEC_UCSI=m
 CONFIG_TYPEC_MUX_FSA4480=m
-CONFIG_UCSI_CCG=m
 CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_TYPEC_MUX_NB7VPQ904M=m
+CONFIG_TYPEC_DP_ALTMODE=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -1106,6 +1145,7 @@ CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_ISL1208=m
 CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
+CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_M41T80=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_RX8581=m
@@ -1161,11 +1201,13 @@ CONFIG_XEN_GRANT_DEV_ALLOC=y
 CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_MAX96712=m
+CONFIG_VIDEO_MESON_VDEC=m
 CONFIG_CHROME_PLATFORMS=y
 CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_RPMSG=m
 CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_KBD_LED_BACKLIGHT=m
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCMI=y
@@ -1175,6 +1217,7 @@ CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_RS9_PCIE=y
+CONFIG_COMMON_CLK_VC3=y
 CONFIG_COMMON_CLK_VC5=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
@@ -1199,30 +1242,32 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CLK_X1E80100_GCC=y
 CONFIG_QCOM_A53PLL=y
 CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
 CONFIG_IPQ_APSS_6018=y
-CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_APSS_5018=y
 CONFIG_IPQ_GCC_5018=y
+CONFIG_IPQ_GCC_5332=y
 CONFIG_IPQ_GCC_6018=y
 CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_9574=y
 CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_GCC_8996=y
-CONFIG_MSM_MMCC_8994=m
 CONFIG_MSM_MMCC_8996=m
-CONFIG_MSM_MMCC_8998=m
 CONFIG_MSM_GCC_8998=y
+CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
-CONFIG_SA_GCC_8775P=y
+CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_8280XP=m
+CONFIG_SA_GCC_8775P=y
 CONFIG_SA_GPUCC_8775P=m
 CONFIG_SC_GCC_7180=y
 CONFIG_SC_GCC_7280=y
@@ -1235,19 +1280,27 @@ CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SDM_LPASSCC_845=m
+CONFIG_SDX_GCC_75=y
 CONFIG_SM_CAMCC_8250=m
 CONFIG_SM_DISPCC_6115=m
 CONFIG_SM_DISPCC_8250=y
 CONFIG_SM_DISPCC_8450=m
 CONFIG_SM_DISPCC_8550=m
+CONFIG_SM_DISPCC_8650=m
+CONFIG_SM_GCC_4450=y
 CONFIG_SM_GCC_6115=y
 CONFIG_SM_GCC_8350=y
 CONFIG_SM_GCC_8450=y
 CONFIG_SM_GCC_8550=y
-CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_GCC_8650=y
 CONFIG_SM_GPUCC_6115=m
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
+CONFIG_SM_GPUCC_8450=m
+CONFIG_SM_GPUCC_8550=m
+CONFIG_SM_GPUCC_8650=m
+CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_TCSRCC_8650=y
 CONFIG_SM_VIDEOCC_8250=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_GFM_LPASS_SM8250=m
@@ -1262,6 +1315,7 @@ CONFIG_OMAP2PLUS_MBOX=m
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_MTK_ADSP_MBOX=m
 CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
@@ -1271,14 +1325,14 @@ CONFIG_MTK_IOMMU=y
 CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_IMX_REMOTEPROC=y
-CONFIG_TI_K3_R5_REMOTEPROC=m
-CONFIG_TI_K3_DSP_REMOTEPROC=m
 CONFIG_MTK_SCP=m
 CONFIG_QCOM_Q6V5_ADSP=m
 CONFIG_QCOM_Q6V5_MSS=m
 CONFIG_QCOM_Q6V5_PAS=m
 CONFIG_QCOM_SYSMON=m
 CONFIG_QCOM_WCNSS_PIL=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
+CONFIG_TI_K3_R5_REMOTEPROC=m
 CONFIG_RPMSG_CHAR=m
 CONFIG_RPMSG_CTRL=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=y
@@ -1287,8 +1341,6 @@ CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=y
 CONFIG_SOUNDWIRE=m
 CONFIG_SOUNDWIRE_QCOM=m
-CONFIG_OWL_PM_DOMAINS=y
-CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
 CONFIG_FSL_RCPM=y
@@ -1298,15 +1350,12 @@ CONFIG_MTK_PMIC_WRAP=y
 CONFIG_MTK_SVS=m
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
-CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_LLCC=m
 CONFIG_QCOM_OCMEM=m
 CONFIG_QCOM_PMIC_GLINK=m
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
-CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -1335,16 +1384,23 @@ CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R9A07G043=y
 CONFIG_ARCH_R9A07G044=y
 CONFIG_ARCH_R9A07G054=y
+CONFIG_ARCH_R9A08G045=y
 CONFIG_ARCH_R9A09G011=y
 CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_TEGRA_234_SOC=y
-CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_TI_PRUSS=m
+CONFIG_OWL_PM_DOMAINS=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_IMX_SCU_PD=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_ARM_IMX_BUS_DEVFREQ=y
 CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
 CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
@@ -1403,6 +1459,7 @@ CONFIG_PHY_XGENE=y
 CONFIG_PHY_CAN_TRANSCEIVER=m
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_DPHY_RX=m
 CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_MIXEL_MIPI_DPHY=m
 CONFIG_PHY_FSL_IMX8M_PCIE=y
@@ -1412,11 +1469,12 @@ CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MTK_TPHY=y
 CONFIG_PHY_QCOM_EDP=m
-CONFIG_PHY_QCOM_EUSB2_REPEATER=m
 CONFIG_PHY_QCOM_PCIE2=m
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
 CONFIG_PHY_QCOM_SNPS_EUSB2=m
+CONFIG_PHY_QCOM_EUSB2_REPEATER=m
+CONFIG_PHY_QCOM_M31_USB=m
 CONFIG_PHY_QCOM_USB_HS=m
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
 CONFIG_PHY_QCOM_USB_HS_28NM=m
@@ -1443,7 +1501,6 @@ CONFIG_PHY_J721E_WIZ=m
 CONFIG_ARM_CCI_PMU=m
 CONFIG_ARM_CCN=m
 CONFIG_ARM_CMN=m
-CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
 CONFIG_ARM_SMMU_V3_PMU=m
 CONFIG_ARM_DSU_PMU=m
 CONFIG_FSL_IMX8_DDR_PMU=m
@@ -1452,6 +1509,8 @@ CONFIG_QCOM_L3_PMU=y
 CONFIG_ARM_SPE_PMU=m
 CONFIG_ARM_DMC620_PMU=m
 CONFIG_HISI_PMU=y
+CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
+CONFIG_MESON_DDR_PMU=m
 CONFIG_NVMEM_LAYOUT_SL28_VPD=m
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_NVMEM_IMX_OCOTP_ELE=m
@@ -1499,11 +1558,14 @@ CONFIG_INTERCONNECT_QCOM_SC7280=y
 CONFIG_INTERCONNECT_QCOM_SC8180X=y
 CONFIG_INTERCONNECT_QCOM_SC8280XP=y
 CONFIG_INTERCONNECT_QCOM_SDM845=y
+CONFIG_INTERCONNECT_QCOM_SDX75=y
 CONFIG_INTERCONNECT_QCOM_SM8150=m
 CONFIG_INTERCONNECT_QCOM_SM8250=m
 CONFIG_INTERCONNECT_QCOM_SM8350=m
 CONFIG_INTERCONNECT_QCOM_SM8450=y
 CONFIG_INTERCONNECT_QCOM_SM8550=y
+CONFIG_INTERCONNECT_QCOM_SM8650=y
+CONFIG_INTERCONNECT_QCOM_X1E80100=y
 CONFIG_COUNTER=m
 CONFIG_RZ_MTU3_CNT=m
 CONFIG_HTE=y
@@ -1526,6 +1588,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
+CONFIG_UBIFS_FS=m
 CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
diff --git a/arch/arm64/configs/hardening.config b/arch/arm64/configs/hardening.config
new file mode 100644
index 000000000..b0e795208
--- /dev/null
+++ b/arch/arm64/configs/hardening.config
@@ -0,0 +1,22 @@
+# Basic kernel hardening options (specific to arm64)
+
+# Make sure PAN emulation is enabled.
+CONFIG_ARM64_SW_TTBR0_PAN=y
+
+# Software Shadow Stack or PAC
+CONFIG_SHADOW_CALL_STACK=y
+
+# Pointer authentication (ARMv8.3 and later). If hardware actually supports
+# it, one can turn off CONFIG_STACKPROTECTOR_STRONG with this enabled.
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+
+# Available in ARMv8.5 and later.
+CONFIG_ARM64_BTI=y
+CONFIG_ARM64_BTI_KERNEL=y
+CONFIG_ARM64_MTE=y
+CONFIG_KASAN_HW_TAGS=y
+CONFIG_ARM64_E0PD=y
+
+# Available in ARMv8.7 and later.
+CONFIG_ARM64_EPAN=y
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index 6d06b448a..eb7b423ba 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -231,7 +231,7 @@ config CRYPTO_SM4_ARM64_CE
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_CE_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR/XTS (ARMv8 Crypto Extensions)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -240,7 +240,6 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
 	    and IEEE 1619)
@@ -250,7 +249,7 @@ config CRYPTO_SM4_ARM64_CE_BLK
 	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SM4_ARM64_NEON_BLK
-	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR (NEON)"
+	tristate "Ciphers: SM4, modes: ECB/CBC/CTR (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_SM4
@@ -259,7 +258,6 @@ config CRYPTO_SM4_ARM64_NEON_BLK
 	  with block cipher modes:
 	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
 	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
-	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
 	  - CTR (Counter) mode (NIST SP800-38A)
 
 	  Architecture: arm64 using:
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
index bac4cabef..467ac2f76 100644
--- a/arch/arm64/crypto/aes-neonbs-glue.c
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -227,8 +227,19 @@ static int ctr_encrypt(struct skcipher_request *req)
 			src += blocks * AES_BLOCK_SIZE;
 		}
 		if (nbytes && walk.nbytes == walk.total) {
+			u8 buf[AES_BLOCK_SIZE];
+			u8 *d = dst;
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				src = dst = memcpy(buf + sizeof(buf) - nbytes,
+						   src, nbytes);
+
 			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
 					     nbytes, walk.iv);
+
+			if (unlikely(nbytes < AES_BLOCK_SIZE))
+				memcpy(d, dst, nbytes);
+
 			nbytes = 0;
 		}
 		kernel_neon_end();
diff --git a/arch/arm64/crypto/nhpoly1305-neon-glue.c b/arch/arm64/crypto/nhpoly1305-neon-glue.c
index cd882c35d..e4a0b463f 100644
--- a/arch/arm64/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm64/crypto/nhpoly1305-neon-glue.c
@@ -34,6 +34,14 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 	return 0;
 }
 
+static int nhpoly1305_neon_digest(struct shash_desc *desc,
+				  const u8 *src, unsigned int srclen, u8 *out)
+{
+	return crypto_nhpoly1305_init(desc) ?:
+	       nhpoly1305_neon_update(desc, src, srclen) ?:
+	       crypto_nhpoly1305_final(desc, out);
+}
+
 static struct shash_alg nhpoly1305_alg = {
 	.base.cra_name		= "nhpoly1305",
 	.base.cra_driver_name	= "nhpoly1305-neon",
@@ -44,6 +52,7 @@ static struct shash_alg nhpoly1305_alg = {
 	.init			= crypto_nhpoly1305_init,
 	.update			= nhpoly1305_neon_update,
 	.final			= crypto_nhpoly1305_final,
+	.digest			= nhpoly1305_neon_digest,
 	.setkey			= crypto_nhpoly1305_setkey,
 	.descsize		= sizeof(struct nhpoly1305_state),
 };
diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
index 889ca0f89..9b1f2d82a 100644
--- a/arch/arm64/crypto/sha1-ce-core.S
+++ b/arch/arm64/crypto/sha1-ce-core.S
@@ -62,10 +62,10 @@
 	.endm
 
 	/*
-	 * int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
-	 *			 int blocks)
+	 * int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
+	 *			   int blocks)
 	 */
-SYM_FUNC_START(sha1_ce_transform)
+SYM_FUNC_START(__sha1_ce_transform)
 	/* load round constants */
 	loadrc		k0.4s, 0x5a827999, w6
 	loadrc		k1.4s, 0x6ed9eba1, w6
@@ -147,4 +147,4 @@ CPU_LE(	rev32		v11.16b, v11.16b	)
 	str		dgb, [x0, #16]
 	mov		w0, w2
 	ret
-SYM_FUNC_END(sha1_ce_transform)
+SYM_FUNC_END(__sha1_ce_transform)
diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c
index 71fa4f112..1dd93e1fc 100644
--- a/arch/arm64/crypto/sha1-ce-glue.c
+++ b/arch/arm64/crypto/sha1-ce-glue.c
@@ -29,18 +29,19 @@ struct sha1_ce_state {
 extern const u32 sha1_ce_offsetof_count;
 extern const u32 sha1_ce_offsetof_finalize;
 
-asmlinkage int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
-				 int blocks);
+asmlinkage int __sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
+				   int blocks);
 
-static void __sha1_ce_transform(struct sha1_state *sst, u8 const *src,
-				int blocks)
+static void sha1_ce_transform(struct sha1_state *sst, u8 const *src,
+			      int blocks)
 {
 	while (blocks) {
 		int rem;
 
 		kernel_neon_begin();
-		rem = sha1_ce_transform(container_of(sst, struct sha1_ce_state,
-						     sst), src, blocks);
+		rem = __sha1_ce_transform(container_of(sst,
+						       struct sha1_ce_state,
+						       sst), src, blocks);
 		kernel_neon_end();
 		src += (blocks - rem) * SHA1_BLOCK_SIZE;
 		blocks = rem;
@@ -59,7 +60,7 @@ static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
 		return crypto_sha1_update(desc, data, len);
 
 	sctx->finalize = 0;
-	sha1_base_do_update(desc, data, len, __sha1_ce_transform);
+	sha1_base_do_update(desc, data, len, sha1_ce_transform);
 
 	return 0;
 }
@@ -79,9 +80,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
 	 */
 	sctx->finalize = finalize;
 
-	sha1_base_do_update(desc, data, len, __sha1_ce_transform);
+	sha1_base_do_update(desc, data, len, sha1_ce_transform);
 	if (!finalize)
-		sha1_base_do_finalize(desc, __sha1_ce_transform);
+		sha1_base_do_finalize(desc, sha1_ce_transform);
 	return sha1_base_finish(desc, out);
 }
 
@@ -93,7 +94,7 @@ static int sha1_ce_final(struct shash_desc *desc, u8 *out)
 		return crypto_sha1_finup(desc, NULL, 0, out);
 
 	sctx->finalize = 0;
-	sha1_base_do_finalize(desc, __sha1_ce_transform);
+	sha1_base_do_finalize(desc, sha1_ce_transform);
 	return sha1_base_finish(desc, out);
 }
 
diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S
index 491179922..fce84d88d 100644
--- a/arch/arm64/crypto/sha2-ce-core.S
+++ b/arch/arm64/crypto/sha2-ce-core.S
@@ -71,11 +71,11 @@
 	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
 
 	/*
-	 * void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-	 *			  int blocks)
+	 * int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
+	 *			     int blocks)
 	 */
 	.text
-SYM_FUNC_START(sha2_ce_transform)
+SYM_FUNC_START(__sha256_ce_transform)
 	/* load round constants */
 	adr_l		x8, .Lsha2_rcon
 	ld1		{ v0.4s- v3.4s}, [x8], #64
@@ -154,4 +154,4 @@ CPU_LE(	rev32		v19.16b, v19.16b	)
 3:	st1		{dgav.4s, dgbv.4s}, [x0]
 	mov		w0, w2
 	ret
-SYM_FUNC_END(sha2_ce_transform)
+SYM_FUNC_END(__sha256_ce_transform)
diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c
index c57a6119f..0a44d2e7e 100644
--- a/arch/arm64/crypto/sha2-ce-glue.c
+++ b/arch/arm64/crypto/sha2-ce-glue.c
@@ -30,18 +30,19 @@ struct sha256_ce_state {
 extern const u32 sha256_ce_offsetof_count;
 extern const u32 sha256_ce_offsetof_finalize;
 
-asmlinkage int sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src,
-				 int blocks);
+asmlinkage int __sha256_ce_transform(struct sha256_ce_state *sst, u8 const *src,
+				     int blocks);
 
-static void __sha2_ce_transform(struct sha256_state *sst, u8 const *src,
+static void sha256_ce_transform(struct sha256_state *sst, u8 const *src,
 				int blocks)
 {
 	while (blocks) {
 		int rem;
 
 		kernel_neon_begin();
-		rem = sha2_ce_transform(container_of(sst, struct sha256_ce_state,
-						     sst), src, blocks);
+		rem = __sha256_ce_transform(container_of(sst,
+							 struct sha256_ce_state,
+							 sst), src, blocks);
 		kernel_neon_end();
 		src += (blocks - rem) * SHA256_BLOCK_SIZE;
 		blocks = rem;
@@ -55,8 +56,8 @@ const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state,
 
 asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks);
 
-static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src,
-				      int blocks)
+static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
+				   int blocks)
 {
 	sha256_block_data_order(sst->state, src, blocks);
 }
@@ -68,10 +69,10 @@ static int sha256_ce_update(struct shash_desc *desc, const u8 *data,
 
 	if (!crypto_simd_usable())
 		return sha256_base_do_update(desc, data, len,
-				__sha256_block_data_order);
+					     sha256_arm64_transform);
 
 	sctx->finalize = 0;
-	sha256_base_do_update(desc, data, len, __sha2_ce_transform);
+	sha256_base_do_update(desc, data, len, sha256_ce_transform);
 
 	return 0;
 }
@@ -85,8 +86,8 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
 	if (!crypto_simd_usable()) {
 		if (len)
 			sha256_base_do_update(desc, data, len,
-				__sha256_block_data_order);
-		sha256_base_do_finalize(desc, __sha256_block_data_order);
+					      sha256_arm64_transform);
+		sha256_base_do_finalize(desc, sha256_arm64_transform);
 		return sha256_base_finish(desc, out);
 	}
 
@@ -96,9 +97,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
 	 */
 	sctx->finalize = finalize;
 
-	sha256_base_do_update(desc, data, len, __sha2_ce_transform);
+	sha256_base_do_update(desc, data, len, sha256_ce_transform);
 	if (!finalize)
-		sha256_base_do_finalize(desc, __sha2_ce_transform);
+		sha256_base_do_finalize(desc, sha256_ce_transform);
 	return sha256_base_finish(desc, out);
 }
 
@@ -107,15 +108,22 @@ static int sha256_ce_final(struct shash_desc *desc, u8 *out)
 	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
 
 	if (!crypto_simd_usable()) {
-		sha256_base_do_finalize(desc, __sha256_block_data_order);
+		sha256_base_do_finalize(desc, sha256_arm64_transform);
 		return sha256_base_finish(desc, out);
 	}
 
 	sctx->finalize = 0;
-	sha256_base_do_finalize(desc, __sha2_ce_transform);
+	sha256_base_do_finalize(desc, sha256_ce_transform);
 	return sha256_base_finish(desc, out);
 }
 
+static int sha256_ce_digest(struct shash_desc *desc, const u8 *data,
+			    unsigned int len, u8 *out)
+{
+	sha256_base_init(desc);
+	return sha256_ce_finup(desc, data, len, out);
+}
+
 static int sha256_ce_export(struct shash_desc *desc, void *out)
 {
 	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
@@ -155,6 +163,7 @@ static struct shash_alg algs[] = { {
 	.update			= sha256_ce_update,
 	.final			= sha256_ce_final,
 	.finup			= sha256_ce_finup,
+	.digest			= sha256_ce_digest,
 	.export			= sha256_ce_export,
 	.import			= sha256_ce_import,
 	.descsize		= sizeof(struct sha256_ce_state),
diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c
index 9b5c86e07..35356987c 100644
--- a/arch/arm64/crypto/sha256-glue.c
+++ b/arch/arm64/crypto/sha256-glue.c
@@ -27,8 +27,8 @@ asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
 					unsigned int num_blks);
 EXPORT_SYMBOL(sha256_block_data_order);
 
-static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src,
-				      int blocks)
+static void sha256_arm64_transform(struct sha256_state *sst, u8 const *src,
+				   int blocks)
 {
 	sha256_block_data_order(sst->state, src, blocks);
 }
@@ -36,8 +36,8 @@ static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src,
 asmlinkage void sha256_block_neon(u32 *digest, const void *data,
 				  unsigned int num_blks);
 
-static void __sha256_block_neon(struct sha256_state *sst, u8 const *src,
-				int blocks)
+static void sha256_neon_transform(struct sha256_state *sst, u8 const *src,
+				  int blocks)
 {
 	sha256_block_neon(sst->state, src, blocks);
 }
@@ -45,17 +45,15 @@ static void __sha256_block_neon(struct sha256_state *sst, u8 const *src,
 static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data,
 				      unsigned int len)
 {
-	return sha256_base_do_update(desc, data, len,
-				     __sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_arm64_transform);
 }
 
 static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data,
 				     unsigned int len, u8 *out)
 {
 	if (len)
-		sha256_base_do_update(desc, data, len,
-				      __sha256_block_data_order);
-	sha256_base_do_finalize(desc, __sha256_block_data_order);
+		sha256_base_do_update(desc, data, len, sha256_arm64_transform);
+	sha256_base_do_finalize(desc, sha256_arm64_transform);
 
 	return sha256_base_finish(desc, out);
 }
@@ -98,7 +96,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
 
 	if (!crypto_simd_usable())
 		return sha256_base_do_update(desc, data, len,
-				__sha256_block_data_order);
+				sha256_arm64_transform);
 
 	while (len > 0) {
 		unsigned int chunk = len;
@@ -114,7 +112,7 @@ static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
 				sctx->count % SHA256_BLOCK_SIZE;
 
 		kernel_neon_begin();
-		sha256_base_do_update(desc, data, chunk, __sha256_block_neon);
+		sha256_base_do_update(desc, data, chunk, sha256_neon_transform);
 		kernel_neon_end();
 		data += chunk;
 		len -= chunk;
@@ -128,13 +126,13 @@ static int sha256_finup_neon(struct shash_desc *desc, const u8 *data,
 	if (!crypto_simd_usable()) {
 		if (len)
 			sha256_base_do_update(desc, data, len,
-				__sha256_block_data_order);
-		sha256_base_do_finalize(desc, __sha256_block_data_order);
+				sha256_arm64_transform);
+		sha256_base_do_finalize(desc, sha256_arm64_transform);
 	} else {
 		if (len)
 			sha256_update_neon(desc, data, len);
 		kernel_neon_begin();
-		sha256_base_do_finalize(desc, __sha256_block_neon);
+		sha256_base_do_finalize(desc, sha256_neon_transform);
 		kernel_neon_end();
 	}
 	return sha256_base_finish(desc, out);
diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S
index b6a3a36e1..91ef68b15 100644
--- a/arch/arm64/crypto/sha512-ce-core.S
+++ b/arch/arm64/crypto/sha512-ce-core.S
@@ -102,11 +102,11 @@
 	.endm
 
 	/*
-	 * void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-	 *			  int blocks)
+	 * int __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+	 *			     int blocks)
 	 */
 	.text
-SYM_FUNC_START(sha512_ce_transform)
+SYM_FUNC_START(__sha512_ce_transform)
 	/* load state */
 	ld1		{v8.2d-v11.2d}, [x0]
 
@@ -203,4 +203,4 @@ CPU_LE(	rev64		v19.16b, v19.16b	)
 3:	st1		{v8.2d-v11.2d}, [x0]
 	mov		w0, w2
 	ret
-SYM_FUNC_END(sha512_ce_transform)
+SYM_FUNC_END(__sha512_ce_transform)
diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c
index 94cb7580d..f3431fc62 100644
--- a/arch/arm64/crypto/sha512-ce-glue.c
+++ b/arch/arm64/crypto/sha512-ce-glue.c
@@ -26,27 +26,27 @@ MODULE_LICENSE("GPL v2");
 MODULE_ALIAS_CRYPTO("sha384");
 MODULE_ALIAS_CRYPTO("sha512");
 
-asmlinkage int sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-				   int blocks);
+asmlinkage int __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+				     int blocks);
 
 asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks);
 
-static void __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
-				  int blocks)
+static void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+				int blocks)
 {
 	while (blocks) {
 		int rem;
 
 		kernel_neon_begin();
-		rem = sha512_ce_transform(sst, src, blocks);
+		rem = __sha512_ce_transform(sst, src, blocks);
 		kernel_neon_end();
 		src += (blocks - rem) * SHA512_BLOCK_SIZE;
 		blocks = rem;
 	}
 }
 
-static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
-				      int blocks)
+static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
+				   int blocks)
 {
 	sha512_block_data_order(sst->state, src, blocks);
 }
@@ -54,8 +54,8 @@ static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
 static int sha512_ce_update(struct shash_desc *desc, const u8 *data,
 			    unsigned int len)
 {
-	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
-						   : __sha512_block_data_order;
+	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
+						   : sha512_arm64_transform;
 
 	sha512_base_do_update(desc, data, len, fn);
 	return 0;
@@ -64,8 +64,8 @@ static int sha512_ce_update(struct shash_desc *desc, const u8 *data,
 static int sha512_ce_finup(struct shash_desc *desc, const u8 *data,
 			   unsigned int len, u8 *out)
 {
-	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
-						   : __sha512_block_data_order;
+	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
+						   : sha512_arm64_transform;
 
 	sha512_base_do_update(desc, data, len, fn);
 	sha512_base_do_finalize(desc, fn);
@@ -74,8 +74,8 @@ static int sha512_ce_finup(struct shash_desc *desc, const u8 *data,
 
 static int sha512_ce_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
-						   : __sha512_block_data_order;
+	sha512_block_fn *fn = crypto_simd_usable() ? sha512_ce_transform
+						   : sha512_arm64_transform;
 
 	sha512_base_do_finalize(desc, fn);
 	return sha512_base_finish(desc, out);
diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c
index 2acff1c7d..62f129dea 100644
--- a/arch/arm64/crypto/sha512-glue.c
+++ b/arch/arm64/crypto/sha512-glue.c
@@ -23,8 +23,8 @@ asmlinkage void sha512_block_data_order(u64 *digest, const void *data,
 					unsigned int num_blks);
 EXPORT_SYMBOL(sha512_block_data_order);
 
-static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
-				      int blocks)
+static void sha512_arm64_transform(struct sha512_state *sst, u8 const *src,
+				   int blocks)
 {
 	sha512_block_data_order(sst->state, src, blocks);
 }
@@ -32,17 +32,15 @@ static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
 static int sha512_update(struct shash_desc *desc, const u8 *data,
 			 unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-				     __sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_arm64_transform);
 }
 
 static int sha512_finup(struct shash_desc *desc, const u8 *data,
 			unsigned int len, u8 *out)
 {
 	if (len)
-		sha512_base_do_update(desc, data, len,
-				      __sha512_block_data_order);
-	sha512_base_do_finalize(desc, __sha512_block_data_order);
+		sha512_base_do_update(desc, data, len, sha512_arm64_transform);
+	sha512_base_do_finalize(desc, sha512_arm64_transform);
 
 	return sha512_base_finish(desc, out);
 }
diff --git a/arch/arm64/crypto/sm4-ce-core.S b/arch/arm64/crypto/sm4-ce-core.S
index 877b80c54..1f3625c2c 100644
--- a/arch/arm64/crypto/sm4-ce-core.S
+++ b/arch/arm64/crypto/sm4-ce-core.S
@@ -403,164 +403,6 @@ SYM_FUNC_START(sm4_ce_cbc_cts_dec)
 SYM_FUNC_END(sm4_ce_cbc_cts_dec)
 
 .align 3
-SYM_FUNC_START(sm4_ce_cfb_enc)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_enc_loop_4x:
-	cmp		w4, #4
-	blt		.Lcfb_enc_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v0.16b, v0.16b, v8.16b
-
-	rev32		v8.16b, v0.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v1.16b, v1.16b, v8.16b
-
-	rev32		v8.16b, v1.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v2.16b, v2.16b, v8.16b
-
-	rev32		v8.16b, v2.16b
-	SM4_CRYPT_BLK_BE(v8)
-	eor		v3.16b, v3.16b, v8.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	mov		RIV.16b, v3.16b
-
-	cbz		w4, .Lcfb_enc_end
-	b		.Lcfb_enc_loop_4x
-
-.Lcfb_enc_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-	eor		RIV.16b, RIV.16b, v0.16b
-
-	st1		{RIV.16b}, [x1], #16
-
-	cbnz		w4, .Lcfb_enc_loop_1x
-
-.Lcfb_enc_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_enc)
-
-.align 3
-SYM_FUNC_START(sm4_ce_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE(x0)
-
-	ld1		{RIV.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-	rev32		v12.16b, v3.16b
-	rev32		v13.16b, v4.16b
-	rev32		v14.16b, v5.16b
-	rev32		v15.16b, v6.16b
-
-	SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15)
-
-	mov		RIV.16b, v7.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-	eor		v4.16b, v4.16b, v12.16b
-	eor		v5.16b, v5.16b, v13.16b
-	eor		v6.16b, v6.16b, v14.16b
-	eor		v7.16b, v7.16b, v15.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_loop_1x
-
-	sub		w4, w4, #4
-
-	ld1		{v0.16b-v3.16b}, [x2], #64
-
-	rev32		v8.16b, RIV.16b
-	rev32		v9.16b, v0.16b
-	rev32		v10.16b, v1.16b
-	rev32		v11.16b, v2.16b
-
-	SM4_CRYPT_BLK4_BE(v8, v9, v10, v11)
-
-	mov		RIV.16b, v3.16b
-
-	eor		v0.16b, v0.16b, v8.16b
-	eor		v1.16b, v1.16b, v9.16b
-	eor		v2.16b, v2.16b, v10.16b
-	eor		v3.16b, v3.16b, v11.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_loop_1x:
-	sub		w4, w4, #1
-
-	ld1		{v0.16b}, [x2], #16
-
-	SM4_CRYPT_BLK(RIV)
-
-	eor		RIV.16b, RIV.16b, v0.16b
-	st1		{RIV.16b}, [x1], #16
-
-	mov		RIV.16b, v0.16b
-
-	cbnz		w4, .Lcfb_dec_loop_1x
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{RIV.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_ce_cfb_dec)
-
-.align 3
 SYM_FUNC_START(sm4_ce_ctr_enc)
 	/* input:
 	 *   x0: round key array, CTX
diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c
index 0a2d32ed3..43741bed8 100644
--- a/arch/arm64/crypto/sm4-ce-glue.c
+++ b/arch/arm64/crypto/sm4-ce-glue.c
@@ -37,10 +37,6 @@ asmlinkage void sm4_ce_cbc_cts_enc(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
 asmlinkage void sm4_ce_cbc_cts_dec(const u32 *rkey, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nbytes);
-asmlinkage void sm4_ce_cfb_enc(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
-asmlinkage void sm4_ce_cfb_dec(const u32 *rkey, u8 *dst, const u8 *src,
-			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_ctr_enc(const u32 *rkey, u8 *dst, const u8 *src,
 			       u8 *iv, unsigned int nblks);
 asmlinkage void sm4_ce_xts_enc(const u32 *rkey1, u8 *dst, const u8 *src,
@@ -56,7 +52,6 @@ asmlinkage void sm4_ce_mac_update(const u32 *rkey_enc, u8 *digest,
 EXPORT_SYMBOL(sm4_ce_expand_key);
 EXPORT_SYMBOL(sm4_ce_crypt_block);
 EXPORT_SYMBOL(sm4_ce_cbc_enc);
-EXPORT_SYMBOL(sm4_ce_cfb_enc);
 
 struct sm4_xts_ctx {
 	struct sm4_ctx key1;
@@ -280,90 +275,6 @@ static int sm4_cbc_cts_decrypt(struct skcipher_request *req)
 	return sm4_cbc_cts_crypt(req, false);
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblks;
-
-		kernel_neon_begin();
-
-		nblks = BYTES2BLKS(nbytes);
-		if (nblks) {
-			sm4_ce_cfb_dec(ctx->rkey_enc, dst, src, walk.iv, nblks);
-			dst += nblks * SM4_BLOCK_SIZE;
-			src += nblks * SM4_BLOCK_SIZE;
-			nbytes -= nblks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		kernel_neon_end();
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -544,22 +455,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.decrypt	= sm4_cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-ce",
-			.cra_priority		= 400,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "ctr(sm4)",
 			.cra_driver_name	= "ctr-sm4-ce",
 			.cra_priority		= 400,
@@ -869,12 +764,11 @@ static void __exit sm4_exit(void)
 module_cpu_feature_match(SM4, sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR/XTS using ARMv8 Crypto Extensions");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 MODULE_ALIAS_CRYPTO("sm4-ce");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_ALIAS_CRYPTO("cts(cbc(sm4))");
 MODULE_ALIAS_CRYPTO("xts(sm4)");
diff --git a/arch/arm64/crypto/sm4-ce.h b/arch/arm64/crypto/sm4-ce.h
index 109c21b37..1e235c437 100644
--- a/arch/arm64/crypto/sm4-ce.h
+++ b/arch/arm64/crypto/sm4-ce.h
@@ -11,6 +11,3 @@ void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src);
 
 void sm4_ce_cbc_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
 		    u8 *iv, unsigned int nblocks);
-
-void sm4_ce_cfb_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
-		    u8 *iv, unsigned int nblocks);
diff --git a/arch/arm64/crypto/sm4-neon-core.S b/arch/arm64/crypto/sm4-neon-core.S
index f295b4b7d..734dc7193 100644
--- a/arch/arm64/crypto/sm4-neon-core.S
+++ b/arch/arm64/crypto/sm4-neon-core.S
@@ -438,119 +438,6 @@ SYM_FUNC_START(sm4_neon_cbc_dec)
 SYM_FUNC_END(sm4_neon_cbc_dec)
 
 .align 3
-SYM_FUNC_START(sm4_neon_cfb_dec)
-	/* input:
-	 *   x0: round key array, CTX
-	 *   x1: dst
-	 *   x2: src
-	 *   x3: iv (big endian, 128 bit)
-	 *   w4: nblocks
-	 */
-	SM4_PREPARE()
-
-	ld1		{v0.16b}, [x3]
-
-.Lcfb_dec_loop_8x:
-	sub		w4, w4, #8
-	tbnz		w4, #31, .Lcfb_dec_4x
-
-	ld1		{v1.16b-v3.16b}, [x2], #48
-	ld4		{v4.4s-v7.4s}, [x2]
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
-
-	sub		x2, x2, #48
-	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
-	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
-
-	eor		v0.16b, v0.16b, RTMP0.16b
-	eor		v1.16b, v1.16b, RTMP1.16b
-	eor		v2.16b, v2.16b, RTMP2.16b
-	eor		v3.16b, v3.16b, RTMP3.16b
-	eor		v4.16b, v4.16b, RTMP4.16b
-	eor		v5.16b, v5.16b, RTMP5.16b
-	eor		v6.16b, v6.16b, RTMP6.16b
-	eor		v7.16b, v7.16b, RTMP7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-	st1		{v4.16b-v7.16b}, [x1], #64
-
-	mov		v0.16b, RTMP7.16b
-
-	cbz		w4, .Lcfb_dec_end
-	b		.Lcfb_dec_loop_8x
-
-.Lcfb_dec_4x:
-	add		w4, w4, #8
-	cmp		w4, #4
-	blt		.Lcfb_dec_tail
-
-	sub		w4, w4, #4
-
-	ld1		{v4.16b-v7.16b}, [x2], #64
-
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-	rev32		v3.16b, v6.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	eor		v0.16b, v0.16b, v4.16b
-	eor		v1.16b, v1.16b, v5.16b
-	eor		v2.16b, v2.16b, v6.16b
-	eor		v3.16b, v3.16b, v7.16b
-
-	st1		{v0.16b-v3.16b}, [x1], #64
-
-	mov		v0.16b, v7.16b
-
-	cbz		w4, .Lcfb_dec_end
-
-.Lcfb_dec_tail:
-	cmp		w4, #2
-	ld1		{v4.16b}, [x2], #16
-	blt		.Lcfb_dec_tail_load_done
-	ld1		{v5.16b}, [x2], #16
-	beq		.Lcfb_dec_tail_load_done
-	ld1		{v6.16b}, [x2], #16
-
-.Lcfb_dec_tail_load_done:
-	rev32		v0.16b, v0.16b		/* v0 is IV register */
-	rev32		v1.16b, v4.16b
-	rev32		v2.16b, v5.16b
-
-	transpose_4x4(v0, v1, v2, v3)
-
-	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
-
-	cmp		w4, #2
-	eor		v0.16b, v0.16b, v4.16b
-	st1		{v0.16b}, [x1], #16
-	mov		v0.16b, v4.16b
-	blt		.Lcfb_dec_end
-
-	eor		v1.16b, v1.16b, v5.16b
-	st1		{v1.16b}, [x1], #16
-	mov		v0.16b, v5.16b
-	beq		.Lcfb_dec_end
-
-	eor		v2.16b, v2.16b, v6.16b
-	st1		{v2.16b}, [x1], #16
-	mov		v0.16b, v6.16b
-
-.Lcfb_dec_end:
-	/* store new IV */
-	st1		{v0.16b}, [x3]
-
-	ret
-SYM_FUNC_END(sm4_neon_cfb_dec)
-
-.align 3
 SYM_FUNC_START(sm4_neon_ctr_crypt)
 	/* input:
 	 *   x0: round key array, CTX
diff --git a/arch/arm64/crypto/sm4-neon-glue.c b/arch/arm64/crypto/sm4-neon-glue.c
index 7b19accf5..e3500aca2 100644
--- a/arch/arm64/crypto/sm4-neon-glue.c
+++ b/arch/arm64/crypto/sm4-neon-glue.c
@@ -22,8 +22,6 @@ asmlinkage void sm4_neon_crypt(const u32 *rkey, u8 *dst, const u8 *src,
 			       unsigned int nblocks);
 asmlinkage void sm4_neon_cbc_dec(const u32 *rkey_dec, u8 *dst, const u8 *src,
 				 u8 *iv, unsigned int nblocks);
-asmlinkage void sm4_neon_cfb_dec(const u32 *rkey_enc, u8 *dst, const u8 *src,
-				 u8 *iv, unsigned int nblocks);
 asmlinkage void sm4_neon_ctr_crypt(const u32 *rkey_enc, u8 *dst, const u8 *src,
 				   u8 *iv, unsigned int nblocks);
 
@@ -142,90 +140,6 @@ static int sm4_cbc_decrypt(struct skcipher_request *req)
 	return err;
 }
 
-static int sm4_cfb_encrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		u8 keystream[SM4_BLOCK_SIZE];
-		const u8 *iv = walk.iv;
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-
-		while (nbytes >= SM4_BLOCK_SIZE) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, iv);
-			crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE);
-			iv = dst;
-			src += SM4_BLOCK_SIZE;
-			dst += SM4_BLOCK_SIZE;
-			nbytes -= SM4_BLOCK_SIZE;
-		}
-		if (iv != walk.iv)
-			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
-static int sm4_cfb_decrypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
-	struct skcipher_walk walk;
-	unsigned int nbytes;
-	int err;
-
-	err = skcipher_walk_virt(&walk, req, false);
-
-	while ((nbytes = walk.nbytes) > 0) {
-		const u8 *src = walk.src.virt.addr;
-		u8 *dst = walk.dst.virt.addr;
-		unsigned int nblocks;
-
-		nblocks = nbytes / SM4_BLOCK_SIZE;
-		if (nblocks) {
-			kernel_neon_begin();
-
-			sm4_neon_cfb_dec(ctx->rkey_enc, dst, src,
-					 walk.iv, nblocks);
-
-			kernel_neon_end();
-
-			dst += nblocks * SM4_BLOCK_SIZE;
-			src += nblocks * SM4_BLOCK_SIZE;
-			nbytes -= nblocks * SM4_BLOCK_SIZE;
-		}
-
-		/* tail */
-		if (walk.nbytes == walk.total && nbytes > 0) {
-			u8 keystream[SM4_BLOCK_SIZE];
-
-			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
-			crypto_xor_cpy(dst, src, keystream, nbytes);
-			nbytes = 0;
-		}
-
-		err = skcipher_walk_done(&walk, nbytes);
-	}
-
-	return err;
-}
-
 static int sm4_ctr_crypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -303,22 +217,6 @@ static struct skcipher_alg sm4_algs[] = {
 		.decrypt	= sm4_cbc_decrypt,
 	}, {
 		.base = {
-			.cra_name		= "cfb(sm4)",
-			.cra_driver_name	= "cfb-sm4-neon",
-			.cra_priority		= 200,
-			.cra_blocksize		= 1,
-			.cra_ctxsize		= sizeof(struct sm4_ctx),
-			.cra_module		= THIS_MODULE,
-		},
-		.min_keysize	= SM4_KEY_SIZE,
-		.max_keysize	= SM4_KEY_SIZE,
-		.ivsize		= SM4_BLOCK_SIZE,
-		.chunksize	= SM4_BLOCK_SIZE,
-		.setkey		= sm4_setkey,
-		.encrypt	= sm4_cfb_encrypt,
-		.decrypt	= sm4_cfb_decrypt,
-	}, {
-		.base = {
 			.cra_name		= "ctr(sm4)",
 			.cra_driver_name	= "ctr-sm4-neon",
 			.cra_priority		= 200,
@@ -349,12 +247,11 @@ static void __exit sm4_exit(void)
 module_init(sm4_init);
 module_exit(sm4_exit);
 
-MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR using ARMv8 NEON");
+MODULE_DESCRIPTION("SM4 ECB/CBC/CTR using ARMv8 NEON");
 MODULE_ALIAS_CRYPTO("sm4-neon");
 MODULE_ALIAS_CRYPTO("sm4");
 MODULE_ALIAS_CRYPTO("ecb(sm4)");
 MODULE_ALIAS_CRYPTO("cbc(sm4)");
-MODULE_ALIAS_CRYPTO("cfb(sm4)");
 MODULE_ALIAS_CRYPTO("ctr(sm4)");
 MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 5c8ee5a54..4b6d2d520 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -6,5 +6,5 @@ generic-y += qspinlock.h
 generic-y += parport.h
 generic-y += user.h
 
-generated-y += cpucaps.h
+generated-y += cpucap-defs.h
 generated-y += sysreg-defs.h
diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h
index 94b486192..d328f549b 100644
--- a/arch/arm64/include/asm/alternative-macros.h
+++ b/arch/arm64/include/asm/alternative-macros.h
@@ -226,10 +226,10 @@ alternative_endif
 static __always_inline bool
 alternative_has_cap_likely(const unsigned long cpucap)
 {
-	compiletime_assert(cpucap < ARM64_NCAPS,
-			   "cpucap must be < ARM64_NCAPS");
+	if (!cpucap_is_possible(cpucap))
+		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE_CB("b	%l[l_no]", %[cpucap], alt_cb_patch_nops)
 	:
 	: [cpucap] "i" (cpucap)
@@ -244,10 +244,10 @@ l_no:
 static __always_inline bool
 alternative_has_cap_unlikely(const unsigned long cpucap)
 {
-	compiletime_assert(cpucap < ARM64_NCAPS,
-			   "cpucap must be < ARM64_NCAPS");
+	if (!cpucap_is_possible(cpucap))
+		return false;
 
-	asm_volatile_goto(
+	asm goto(
 	ALTERNATIVE("nop", "b	%l[l_yes]", %[cpucap])
 	:
 	: [cpucap] "i" (cpucap)
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 01281a533..5f1726116 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -79,6 +79,14 @@ static inline u64 gic_read_iar_cavium_thunderx(void)
 	return 0x3ff;
 }
 
+static u64 __maybe_unused gic_read_iar(void)
+{
+	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_CAVIUM_23154))
+		return gic_read_iar_cavium_thunderx();
+	else
+		return gic_read_iar_common();
+}
+
 static inline void gic_write_ctlr(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_CTLR_EL1);
diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h
index b0abc64f8..ecdb3cfcd 100644
--- a/arch/arm64/include/asm/archrandom.h
+++ b/arch/arm64/include/asm/archrandom.h
@@ -63,7 +63,7 @@ static __always_inline bool __cpu_has_rng(void)
 {
 	if (unlikely(!system_capabilities_finalized() && !preemptible()))
 		return this_cpu_has_cap(ARM64_HAS_RNG);
-	return cpus_have_const_cap(ARM64_HAS_RNG);
+	return alternative_has_cap_unlikely(ARM64_HAS_RNG);
 }
 
 static inline size_t __must_check arch_get_random_longs(unsigned long *v, size_t max_longs)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 376a980f2..513787e43 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -12,7 +12,7 @@
 #ifndef __ASM_ASSEMBLER_H
 #define __ASM_ASSEMBLER_H
 
-#include <asm-generic/export.h>
+#include <linux/export.h>
 
 #include <asm/alternative.h>
 #include <asm/asm-bug.h>
@@ -760,32 +760,25 @@ alternative_endif
 .endm
 
 	/*
-	 * Check whether preempt/bh-disabled asm code should yield as soon as
-	 * it is able. This is the case if we are currently running in task
-	 * context, and either a softirq is pending, or the TIF_NEED_RESCHED
-	 * flag is set and re-enabling preemption a single time would result in
-	 * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is
-	 * stored negated in the top word of the thread_info::preempt_count
+	 * Check whether asm code should yield as soon as it is able. This is
+	 * the case if we are currently running in task context, and the
+	 * TIF_NEED_RESCHED flag is set. (Note that the TIF_NEED_RESCHED flag
+	 * is stored negated in the top word of the thread_info::preempt_count
 	 * field)
 	 */
-	.macro		cond_yield, lbl:req, tmp:req, tmp2:req
+	.macro		cond_yield, lbl:req, tmp:req, tmp2
+#ifdef CONFIG_PREEMPT_VOLUNTARY
 	get_current_task \tmp
 	ldr		\tmp, [\tmp, #TSK_TI_PREEMPT]
 	/*
 	 * If we are serving a softirq, there is no point in yielding: the
 	 * softirq will not be preempted no matter what we do, so we should
-	 * run to completion as quickly as we can.
+	 * run to completion as quickly as we can. The preempt_count field will
+	 * have BIT(SOFTIRQ_SHIFT) set in this case, so the zero check will
+	 * catch this case too.
 	 */
-	tbnz		\tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@
-#ifdef CONFIG_PREEMPTION
-	sub		\tmp, \tmp, #PREEMPT_DISABLE_OFFSET
 	cbz		\tmp, \lbl
 #endif
-	adr_l		\tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING
-	get_this_cpu_offset	\tmp2
-	ldr		w\tmp, [\tmp, \tmp2]
-	cbnz		w\tmp, \lbl	// yield on pending softirq in task context
-.Lnoyield_\@:
 	.endm
 
 /*
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
index ceb368d33..06a4670bd 100644
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@@ -58,7 +58,6 @@ static inline unsigned int arch_slab_minalign(void)
 #define CTR_L1IP(ctr)		SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
 
 #define ICACHEF_ALIASING	0
-#define ICACHEF_VPIPT		1
 extern unsigned long __icache_flags;
 
 /*
@@ -70,11 +69,6 @@ static inline int icache_is_aliasing(void)
 	return test_bit(ICACHEF_ALIASING, &__icache_flags);
 }
 
-static __always_inline int icache_is_vpipt(void)
-{
-	return test_bit(ICACHEF_VPIPT, &__icache_flags);
-}
-
 static inline u32 cache_type_cwg(void)
 {
 	return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype());
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index d115451ed..fefac75fa 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -132,7 +132,7 @@ void flush_dcache_folio(struct folio *);
 
 static __always_inline void icache_inval_all_pou(void)
 {
-	if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
+	if (alternative_has_cap_unlikely(ARM64_HAS_CACHE_DIC))
 		return;
 
 	asm("ic	ialluis");
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index e749838b9..b1e43f56e 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -38,7 +38,6 @@ struct cpuinfo_32bit {
 };
 
 struct cpuinfo_arm64 {
-	struct cpu	cpu;
 	struct kobject	kobj;
 	u64		reg_ctr;
 	u64		reg_cntfrq;
@@ -63,12 +62,6 @@ struct cpuinfo_arm64 {
 	u64		reg_id_aa64smfr0;
 
 	struct cpuinfo_32bit	aarch32;
-
-	/* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */
-	u64		reg_zcr;
-
-	/* pseudo-SMCR for recording maximum SMCR_EL1 LEN value: */
-	u64		reg_smcr;
 };
 
 DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
new file mode 100644
index 000000000..270680e2b
--- /dev/null
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_CPUCAPS_H
+#define __ASM_CPUCAPS_H
+
+#include <asm/cpucap-defs.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+/*
+ * Check whether a cpucap is possible at compiletime.
+ */
+static __always_inline bool
+cpucap_is_possible(const unsigned int cap)
+{
+	compiletime_assert(__builtin_constant_p(cap),
+			   "cap must be a constant");
+	compiletime_assert(cap < ARM64_NCAPS,
+			   "cap must be < ARM64_NCAPS");
+
+	switch (cap) {
+	case ARM64_HAS_PAN:
+		return IS_ENABLED(CONFIG_ARM64_PAN);
+	case ARM64_HAS_EPAN:
+		return IS_ENABLED(CONFIG_ARM64_EPAN);
+	case ARM64_SVE:
+		return IS_ENABLED(CONFIG_ARM64_SVE);
+	case ARM64_SME:
+	case ARM64_SME2:
+	case ARM64_SME_FA64:
+		return IS_ENABLED(CONFIG_ARM64_SME);
+	case ARM64_HAS_CNP:
+		return IS_ENABLED(CONFIG_ARM64_CNP);
+	case ARM64_HAS_ADDRESS_AUTH:
+	case ARM64_HAS_GENERIC_AUTH:
+		return IS_ENABLED(CONFIG_ARM64_PTR_AUTH);
+	case ARM64_HAS_GIC_PRIO_MASKING:
+		return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI);
+	case ARM64_MTE:
+		return IS_ENABLED(CONFIG_ARM64_MTE);
+	case ARM64_BTI:
+		return IS_ENABLED(CONFIG_ARM64_BTI);
+	case ARM64_HAS_TLB_RANGE:
+		return IS_ENABLED(CONFIG_ARM64_TLB_RANGE);
+	case ARM64_UNMAP_KERNEL_AT_EL0:
+		return IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0);
+	case ARM64_WORKAROUND_843419:
+		return IS_ENABLED(CONFIG_ARM64_ERRATUM_843419);
+	case ARM64_WORKAROUND_1742098:
+		return IS_ENABLED(CONFIG_ARM64_ERRATUM_1742098);
+	case ARM64_WORKAROUND_2645198:
+		return IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198);
+	case ARM64_WORKAROUND_2658417:
+		return IS_ENABLED(CONFIG_ARM64_ERRATUM_2658417);
+	case ARM64_WORKAROUND_CAVIUM_23154:
+		return IS_ENABLED(CONFIG_CAVIUM_ERRATUM_23154);
+	case ARM64_WORKAROUND_NVIDIA_CARMEL_CNP:
+		return IS_ENABLED(CONFIG_NVIDIA_CARMEL_CNP_ERRATUM);
+	case ARM64_WORKAROUND_REPEAT_TLBI:
+		return IS_ENABLED(CONFIG_ARM64_WORKAROUND_REPEAT_TLBI);
+	}
+
+	return true;
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 5bba39376..bd8d4ca81 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -23,6 +23,7 @@
 #include <linux/bug.h>
 #include <linux/jump_label.h>
 #include <linux/kernel.h>
+#include <linux/cpumask.h>
 
 /*
  * CPU feature register tracking
@@ -82,7 +83,7 @@ struct arm64_ftr_bits {
  * to full-0 denotes that this field has no override
  *
  * A @mask field set to full-0 with the corresponding @val field set
- * to full-1 denotes thath this field has an invalid override.
+ * to full-1 denotes that this field has an invalid override.
  */
 struct arm64_ftr_override {
 	u64		val;
@@ -380,6 +381,7 @@ struct arm64_cpu_capabilities {
 	 * method is robust against being called multiple times.
 	 */
 	const struct arm64_cpu_capabilities *match_list;
+	const struct cpumask *cpus;
 };
 
 static inline int cpucap_default_scope(const struct arm64_cpu_capabilities *cap)
@@ -438,6 +440,11 @@ unsigned long cpu_get_elf_hwcap2(void);
 #define cpu_set_named_feature(name) cpu_set_feature(cpu_feature(name))
 #define cpu_have_named_feature(name) cpu_have_feature(cpu_feature(name))
 
+static __always_inline bool boot_capabilities_finalized(void)
+{
+	return alternative_has_cap_likely(ARM64_ALWAYS_BOOT);
+}
+
 static __always_inline bool system_capabilities_finalized(void)
 {
 	return alternative_has_cap_likely(ARM64_ALWAYS_SYSTEM);
@@ -450,6 +457,8 @@ static __always_inline bool system_capabilities_finalized(void)
  */
 static __always_inline bool cpus_have_cap(unsigned int num)
 {
+	if (__builtin_constant_p(num) && !cpucap_is_possible(num))
+		return false;
 	if (num >= ARM64_NCAPS)
 		return false;
 	return arch_test_bit(num, system_cpucaps);
@@ -458,55 +467,37 @@ static __always_inline bool cpus_have_cap(unsigned int num)
 /*
  * Test for a capability without a runtime check.
  *
- * Before capabilities are finalized, this returns false.
- * After capabilities are finalized, this is patched to avoid a runtime check.
+ * Before boot capabilities are finalized, this will BUG().
+ * After boot capabilities are finalized, this is patched to avoid a runtime
+ * check.
  *
  * @num must be a compile-time constant.
  */
-static __always_inline bool __cpus_have_const_cap(int num)
+static __always_inline bool cpus_have_final_boot_cap(int num)
 {
-	if (num >= ARM64_NCAPS)
-		return false;
-	return alternative_has_cap_unlikely(num);
+	if (boot_capabilities_finalized())
+		return alternative_has_cap_unlikely(num);
+	else
+		BUG();
 }
 
 /*
  * Test for a capability without a runtime check.
  *
- * Before capabilities are finalized, this will BUG().
- * After capabilities are finalized, this is patched to avoid a runtime check.
+ * Before system capabilities are finalized, this will BUG().
+ * After system capabilities are finalized, this is patched to avoid a runtime
+ * check.
  *
  * @num must be a compile-time constant.
  */
 static __always_inline bool cpus_have_final_cap(int num)
 {
 	if (system_capabilities_finalized())
-		return __cpus_have_const_cap(num);
+		return alternative_has_cap_unlikely(num);
 	else
 		BUG();
 }
 
-/*
- * Test for a capability, possibly with a runtime check for non-hyp code.
- *
- * For hyp code, this behaves the same as cpus_have_final_cap().
- *
- * For non-hyp code:
- * Before capabilities are finalized, this behaves as cpus_have_cap().
- * After capabilities are finalized, this is patched to avoid a runtime check.
- *
- * @num must be a compile-time constant.
- */
-static __always_inline bool cpus_have_const_cap(int num)
-{
-	if (is_hyp_code())
-		return cpus_have_final_cap(num);
-	else if (system_capabilities_finalized())
-		return __cpus_have_const_cap(num);
-	else
-		return cpus_have_cap(num);
-}
-
 static inline int __attribute_const__
 cpuid_feature_extract_signed_field_width(u64 features, int field, int width)
 {
@@ -626,7 +617,10 @@ static inline bool id_aa64pfr1_mte(u64 pfr1)
 	return val >= ID_AA64PFR1_EL1_MTE_MTE2;
 }
 
-void __init setup_cpu_features(void);
+void __init setup_boot_cpu_features(void);
+void __init setup_system_features(void);
+void __init setup_user_features(void);
+
 void check_local_cpu_capabilities(void);
 
 u64 read_sanitised_ftr_reg(u32 id);
@@ -735,13 +729,12 @@ static inline bool system_supports_mixed_endian(void)
 
 static __always_inline bool system_supports_fpsimd(void)
 {
-	return !cpus_have_const_cap(ARM64_HAS_NO_FPSIMD);
+	return alternative_has_cap_likely(ARM64_HAS_FPSIMD);
 }
 
 static inline bool system_uses_hw_pan(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_PAN) &&
-		cpus_have_const_cap(ARM64_HAS_PAN);
+	return alternative_has_cap_unlikely(ARM64_HAS_PAN);
 }
 
 static inline bool system_uses_ttbr0_pan(void)
@@ -752,26 +745,22 @@ static inline bool system_uses_ttbr0_pan(void)
 
 static __always_inline bool system_supports_sve(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_SVE) &&
-		cpus_have_const_cap(ARM64_SVE);
+	return alternative_has_cap_unlikely(ARM64_SVE);
 }
 
 static __always_inline bool system_supports_sme(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_SME) &&
-		cpus_have_const_cap(ARM64_SME);
+	return alternative_has_cap_unlikely(ARM64_SME);
 }
 
 static __always_inline bool system_supports_sme2(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_SME) &&
-		cpus_have_const_cap(ARM64_SME2);
+	return alternative_has_cap_unlikely(ARM64_SME2);
 }
 
 static __always_inline bool system_supports_fa64(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_SME) &&
-		cpus_have_const_cap(ARM64_SME_FA64);
+	return alternative_has_cap_unlikely(ARM64_SME_FA64);
 }
 
 static __always_inline bool system_supports_tpidr2(void)
@@ -781,20 +770,17 @@ static __always_inline bool system_supports_tpidr2(void)
 
 static __always_inline bool system_supports_cnp(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_CNP) &&
-		cpus_have_const_cap(ARM64_HAS_CNP);
+	return alternative_has_cap_unlikely(ARM64_HAS_CNP);
 }
 
 static inline bool system_supports_address_auth(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) &&
-		cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH);
+	return cpus_have_final_boot_cap(ARM64_HAS_ADDRESS_AUTH);
 }
 
 static inline bool system_supports_generic_auth(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) &&
-		cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH);
+	return alternative_has_cap_unlikely(ARM64_HAS_GENERIC_AUTH);
 }
 
 static inline bool system_has_full_ptr_auth(void)
@@ -804,14 +790,12 @@ static inline bool system_has_full_ptr_auth(void)
 
 static __always_inline bool system_uses_irq_prio_masking(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
-	       cpus_have_const_cap(ARM64_HAS_GIC_PRIO_MASKING);
+	return alternative_has_cap_unlikely(ARM64_HAS_GIC_PRIO_MASKING);
 }
 
 static inline bool system_supports_mte(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_MTE) &&
-		cpus_have_const_cap(ARM64_MTE);
+	return alternative_has_cap_unlikely(ARM64_MTE);
 }
 
 static inline bool system_has_prio_mask_debugging(void)
@@ -822,13 +806,23 @@ static inline bool system_has_prio_mask_debugging(void)
 
 static inline bool system_supports_bti(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_BTI) && cpus_have_const_cap(ARM64_BTI);
+	return cpus_have_final_cap(ARM64_BTI);
+}
+
+static inline bool system_supports_bti_kernel(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) &&
+		cpus_have_final_boot_cap(ARM64_BTI);
 }
 
 static inline bool system_supports_tlb_range(void)
 {
-	return IS_ENABLED(CONFIG_ARM64_TLB_RANGE) &&
-		cpus_have_const_cap(ARM64_HAS_TLB_RANGE);
+	return alternative_has_cap_unlikely(ARM64_HAS_TLB_RANGE);
+}
+
+static inline bool system_supports_lpa2(void)
+{
+	return cpus_have_final_cap(ARM64_HAS_LPA2);
 }
 
 int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 7c7493cb5..52f076afe 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -61,6 +61,7 @@
 #define ARM_CPU_IMP_HISI		0x48
 #define ARM_CPU_IMP_APPLE		0x61
 #define ARM_CPU_IMP_AMPERE		0xC0
+#define ARM_CPU_IMP_MICROSOFT		0x6D
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -135,6 +136,8 @@
 
 #define AMPERE_CPU_PART_AMPERE1		0xAC3
 
+#define MICROSOFT_CPU_PART_AZURE_COBALT_100	0xD49 /* Based on r0p0 of ARM Neoverse N2 */
+
 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
 #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
 #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
@@ -193,6 +196,7 @@
 #define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
 #define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
 #define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
+#define MIDR_MICROSOFT_AZURE_COBALT_100 MIDR_CPU_MODEL(ARM_CPU_IMP_MICROSOFT, MICROSOFT_CPU_PART_AZURE_COBALT_100)
 
 /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
 #define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
diff --git a/arch/arm64/include/asm/crash_core.h b/arch/arm64/include/asm/crash_core.h
new file mode 100644
index 000000000..9f5c8d339
--- /dev/null
+++ b/arch/arm64/include/asm/crash_core.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ARM64_CRASH_CORE_H
+#define _ARM64_CRASH_CORE_H
+
+/* Current arm64 boot protocol requires 2MB alignment */
+#define CRASH_ALIGN                     SZ_2M
+
+#define CRASH_ADDR_LOW_MAX              arm64_dma_phys_limit
+#define CRASH_ADDR_HIGH_MAX             (PHYS_MASK + 1)
+#endif
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index ae35939f3..353fe0854 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -392,6 +392,21 @@ static inline bool esr_is_data_abort(unsigned long esr)
 	return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
 }
 
+static inline bool esr_fsc_is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
+static inline bool esr_fsc_is_permission_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM;
+}
+
+static inline bool esr_fsc_is_access_flag_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_ACCESS;
+}
+
 const char *esr_get_class_string(unsigned long esr);
 #endif /* __ASSEMBLY */
 
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index 8df46f186..b67b89c54 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -32,17 +32,43 @@
 #define VFP_STATE_SIZE		((32 * 8) + 4)
 #endif
 
+static inline unsigned long cpacr_save_enable_kernel_sve(void)
+{
+	unsigned long old = read_sysreg(cpacr_el1);
+	unsigned long set = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_ZEN_EL1EN;
+
+	write_sysreg(old | set, cpacr_el1);
+	isb();
+	return old;
+}
+
+static inline unsigned long cpacr_save_enable_kernel_sme(void)
+{
+	unsigned long old = read_sysreg(cpacr_el1);
+	unsigned long set = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_SMEN_EL1EN;
+
+	write_sysreg(old | set, cpacr_el1);
+	isb();
+	return old;
+}
+
+static inline void cpacr_restore(unsigned long cpacr)
+{
+	write_sysreg(cpacr, cpacr_el1);
+	isb();
+}
+
 /*
  * When we defined the maximum SVE vector length we defined the ABI so
  * that the maximum vector length included all the reserved for future
  * expansion bits in ZCR rather than those just currently defined by
- * the architecture. While SME follows a similar pattern the fact that
- * it includes a square matrix means that any allocations that attempt
- * to cover the maximum potential vector length (such as happen with
- * the regset used for ptrace) end up being extremely large. Define
- * the much lower actual limit for use in such situations.
+ * the architecture.  Using this length to allocate worst size buffers
+ * results in excessively large allocations, and this effect is even
+ * more pronounced for SME due to ZA.  Define more suitable VLs for
+ * these situations.
  */
-#define SME_VQ_MAX	16
+#define ARCH_SVE_VQ_MAX ((ZCR_ELx_LEN_MASK >> ZCR_ELx_LEN_SHIFT) + 1)
+#define SME_VQ_MAX	((SMCR_ELx_LEN_MASK >> SMCR_ELx_LEN_SHIFT) + 1)
 
 struct task_struct;
 
@@ -123,12 +149,12 @@ extern void sme_save_state(void *state, int zt);
 extern void sme_load_state(void const *state, int zt);
 
 struct arm64_cpu_capabilities;
-extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused);
-extern void sme_kernel_enable(const struct arm64_cpu_capabilities *__unused);
-extern void sme2_kernel_enable(const struct arm64_cpu_capabilities *__unused);
-extern void fa64_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+extern void cpu_enable_fpsimd(const struct arm64_cpu_capabilities *__unused);
+extern void cpu_enable_sve(const struct arm64_cpu_capabilities *__unused);
+extern void cpu_enable_sme(const struct arm64_cpu_capabilities *__unused);
+extern void cpu_enable_sme2(const struct arm64_cpu_capabilities *__unused);
+extern void cpu_enable_fa64(const struct arm64_cpu_capabilities *__unused);
 
-extern u64 read_zcr_features(void);
 extern u64 read_smcr_features(void);
 
 /*
@@ -360,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush);
 extern unsigned int sme_get_vl(void);
 extern int sme_set_current_vl(unsigned long arg);
 extern int sme_get_current_vl(void);
+extern void sme_suspend_exit(void);
 
 /*
  * Return how many bytes of memory are required to store the full SME
@@ -395,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; }
 static inline int sme_max_virtualisable_vl(void) { return 0; }
 static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
 static inline int sme_get_current_vl(void) { return -EINVAL; }
+static inline void sme_suspend_exit(void) { }
 
 static inline size_t sme_state_size(struct task_struct const *task)
 {
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
index cdf6a35e3..cda81d009 100644
--- a/arch/arm64/include/asm/fpsimdmacros.h
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -242,14 +242,6 @@
 		| (\nx << 5)
 .endm
 
-/*
- * Zero the entire ZA array
- *	ZERO ZA
- */
-.macro zero_za
-	.inst 0xc00800ff
-.endm
-
 .macro __for from:req, to:req
 	.if (\from) == (\to)
 		_for__body %\from
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 521267478..cd71e09ea 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -139,6 +139,9 @@
 #define KERNEL_HWCAP_SME_F16F16		__khwcap2_feature(SME_F16F16)
 #define KERNEL_HWCAP_MOPS		__khwcap2_feature(MOPS)
 #define KERNEL_HWCAP_HBC		__khwcap2_feature(HBC)
+#define KERNEL_HWCAP_SVE_B16B16		__khwcap2_feature(SVE_B16B16)
+#define KERNEL_HWCAP_LRCPC3		__khwcap2_feature(LRCPC3)
+#define KERNEL_HWCAP_LSE128		__khwcap2_feature(LSE128)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index fac08e18b..e93548914 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -4,8 +4,13 @@
 
 #ifndef __ASSEMBLER__
 
+#include <linux/cpumask.h>
+
 #include <asm-generic/irq.h>
 
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
+
 struct pt_regs;
 
 int set_handle_irq(void (*handle_irq)(struct pt_regs *));
diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h
index 81bbfa3a0..a1020285e 100644
--- a/arch/arm64/include/asm/irq_work.h
+++ b/arch/arm64/include/asm/irq_work.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_IRQ_WORK_H
 #define __ASM_IRQ_WORK_H
 
-extern void arch_irq_work_raise(void);
-
 static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 1f31ec146..d4d7451c2 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -5,7 +5,6 @@
 #ifndef __ASM_IRQFLAGS_H
 #define __ASM_IRQFLAGS_H
 
-#include <asm/alternative.h>
 #include <asm/barrier.h>
 #include <asm/ptrace.h>
 #include <asm/sysreg.h>
@@ -21,12 +20,6 @@
  * exceptions should be unmasked.
  */
 
-static __always_inline bool __irqflags_uses_pmr(void)
-{
-	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
-	       alternative_has_cap_unlikely(ARM64_HAS_GIC_PRIO_MASKING);
-}
-
 static __always_inline void __daif_local_irq_enable(void)
 {
 	barrier();
@@ -49,7 +42,7 @@ static __always_inline void __pmr_local_irq_enable(void)
 
 static inline void arch_local_irq_enable(void)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		__pmr_local_irq_enable();
 	} else {
 		__daif_local_irq_enable();
@@ -77,7 +70,7 @@ static __always_inline void __pmr_local_irq_disable(void)
 
 static inline void arch_local_irq_disable(void)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		__pmr_local_irq_disable();
 	} else {
 		__daif_local_irq_disable();
@@ -99,7 +92,7 @@ static __always_inline unsigned long __pmr_local_save_flags(void)
  */
 static inline unsigned long arch_local_save_flags(void)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		return __pmr_local_save_flags();
 	} else {
 		return __daif_local_save_flags();
@@ -118,7 +111,7 @@ static __always_inline bool __pmr_irqs_disabled_flags(unsigned long flags)
 
 static inline bool arch_irqs_disabled_flags(unsigned long flags)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		return __pmr_irqs_disabled_flags(flags);
 	} else {
 		return __daif_irqs_disabled_flags(flags);
@@ -137,7 +130,7 @@ static __always_inline bool __pmr_irqs_disabled(void)
 
 static inline bool arch_irqs_disabled(void)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		return __pmr_irqs_disabled();
 	} else {
 		return __daif_irqs_disabled();
@@ -169,7 +162,7 @@ static __always_inline unsigned long __pmr_local_irq_save(void)
 
 static inline unsigned long arch_local_irq_save(void)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		return __pmr_local_irq_save();
 	} else {
 		return __daif_local_irq_save();
@@ -196,7 +189,7 @@ static __always_inline void __pmr_local_irq_restore(unsigned long flags)
  */
 static inline void arch_local_irq_restore(unsigned long flags)
 {
-	if (__irqflags_uses_pmr()) {
+	if (system_uses_irq_prio_masking()) {
 		__pmr_local_irq_restore(flags);
 	} else {
 		__daif_local_irq_restore(flags);
diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
index 48ddc0f45..6aafbb789 100644
--- a/arch/arm64/include/asm/jump_label.h
+++ b/arch/arm64/include/asm/jump_label.h
@@ -18,7 +18,7 @@
 static __always_inline bool arch_static_branch(struct static_key * const key,
 					       const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	nop					\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
@@ -35,7 +35,7 @@ l_yes:
 static __always_inline bool arch_static_branch_jump(struct static_key * const key,
 						    const bool branch)
 {
-	asm_volatile_goto(
+	asm goto(
 		"1:	b		%l[l_yes]		\n\t"
 		 "	.pushsection	__jump_table, \"aw\"	\n\t"
 		 "	.align		3			\n\t"
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
index 12d5f47f7..7eefc525a 100644
--- a/arch/arm64/include/asm/kasan.h
+++ b/arch/arm64/include/asm/kasan.h
@@ -15,29 +15,9 @@
 
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 
+asmlinkage void kasan_early_init(void);
 void kasan_init(void);
-
-/*
- * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
- * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
- * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
- *
- * KASAN_SHADOW_OFFSET:
- * This value is used to map an address to the corresponding shadow
- * address by the following formula:
- *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
- *
- * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
- * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
- * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
- *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
- *				(1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
- */
-#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
-#define KASAN_SHADOW_START      _KASAN_SHADOW_START(vabits_actual)
-
 void kasan_copy_shadow(pgd_t *pgdir);
-asmlinkage void kasan_early_init(void);
 
 #else
 static inline void kasan_init(void) { }
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index 85d26143f..83ddb14b9 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -37,27 +37,12 @@
 
 
 /*
- * If KASLR is enabled, then an offset K is added to the kernel address
- * space. The bottom 21 bits of this offset are zero to guarantee 2MB
- * alignment for PA and VA.
- *
- * For each pagetable level of the swapper, we know that the shift will
- * be larger than 21 (for the 4KB granule case we use section maps thus
- * the smallest shift is actually 30) thus there is the possibility that
- * KASLR can increase the number of pagetable entries by 1, so we make
- * room for this extra entry.
- *
- * Note KASLR cannot increase the number of required entries for a level
- * by more than one because it increments both the virtual start and end
- * addresses equally (the extra entry comes from the case where the end
- * address is just pushed over a boundary and the start address isn't).
+ * A relocatable kernel may execute from an address that differs from the one at
+ * which it was linked. In the worst case, its runtime placement may intersect
+ * with two adjacent PGDIR entries, which means that an additional page table
+ * may be needed at each subordinate level.
  */
-
-#ifdef CONFIG_RANDOMIZE_BASE
-#define EARLY_KASLR	(1)
-#else
-#define EARLY_KASLR	(0)
-#endif
+#define EXTRA_PAGE	__is_defined(CONFIG_RELOCATABLE)
 
 #define SPAN_NR_ENTRIES(vstart, vend, shift) \
 	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
@@ -83,7 +68,7 @@
 			+ EARLY_PGDS((vstart), (vend), add) 	/* each PGDIR needs a next level page table */	\
 			+ EARLY_PUDS((vstart), (vend), add)	/* each PUD needs a next level page table */	\
 			+ EARLY_PMDS((vstart), (vend), add))	/* each PMD needs a next level page table */
-#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EARLY_KASLR))
+#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EXTRA_PAGE))
 
 /* the initial ID map may need two extra pages if it needs to be extended */
 #if VA_BITS < 48
diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
index 05cd82eec..be7a3680d 100644
--- a/arch/arm64/include/asm/kprobes.h
+++ b/arch/arm64/include/asm/kprobes.h
@@ -37,8 +37,6 @@ struct kprobe_ctlblk {
 
 void arch_remove_kprobe(struct kprobe *);
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
 void __kretprobe_trampoline(void);
 void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
 
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 1095c6647..3c6f8ba1e 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -102,10 +102,13 @@
 #define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC)
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
-#define HCRX_GUEST_FLAGS (HCRX_EL2_SMPME | HCRX_EL2_TCR2En)
+#define HCRX_GUEST_FLAGS \
+	(HCRX_EL2_SMPME | HCRX_EL2_TCR2En | \
+	 (cpus_have_final_cap(ARM64_HAS_MOPS) ? (HCRX_EL2_MSCEn | HCRX_EL2_MCE2) : 0))
 #define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En)
 
 /* TCR_EL2 Registers bits */
+#define TCR_EL2_DS		(1UL << 32)
 #define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
@@ -120,6 +123,7 @@
 			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK)
 
 /* VTCR_EL2 Registers bits */
+#define VTCR_EL2_DS		TCR_EL2_DS
 #define VTCR_EL2_RES1		(1U << 31)
 #define VTCR_EL2_HD		(1 << 22)
 #define VTCR_EL2_HA		(1 << 21)
@@ -342,36 +346,47 @@
  * Once we get to a point where the two describe the same thing, we'll
  * merge the definitions. One day.
  */
-#define __HFGRTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51))
+#define __HFGRTR_EL2_RES0	HFGxTR_EL2_RES0
 #define __HFGRTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGRTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
+#define __HFGRTR_EL2_nMASK	~(__HFGRTR_EL2_RES0 | __HFGRTR_EL2_MASK)
 
-#define __HFGWTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51) |	\
-				 BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
-				 GENMASK(26, 25) | BIT(21) | BIT(18) |	\
+/*
+ * The HFGWTR bits are a subset of HFGRTR bits. To ensure we don't miss any
+ * future additions, define __HFGWTR* macros relative to __HFGRTR* ones.
+ */
+#define __HFGRTR_ONLY_MASK	(BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
+				 GENMASK(26, 25) | BIT(21) | BIT(18) | \
 				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
-#define __HFGWTR_EL2_MASK	GENMASK(49, 0)
-#define __HFGWTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
-
-#define __HFGITR_EL2_RES0	GENMASK(63, 57)
-#define __HFGITR_EL2_MASK	GENMASK(54, 0)
-#define __HFGITR_EL2_nMASK	GENMASK(56, 55)
-
-#define __HDFGRTR_EL2_RES0	(BIT(49) | BIT(42) | GENMASK(39, 38) |	\
-				 GENMASK(21, 20) | BIT(8))
-#define __HDFGRTR_EL2_MASK	~__HDFGRTR_EL2_nMASK
-#define __HDFGRTR_EL2_nMASK	GENMASK(62, 59)
-
-#define __HDFGWTR_EL2_RES0	(BIT(63) | GENMASK(59, 58) | BIT(51) | BIT(47) | \
-				 BIT(43) | GENMASK(40, 38) | BIT(34) | BIT(30) | \
-				 BIT(22) | BIT(9) | BIT(6))
-#define __HDFGWTR_EL2_MASK	~__HDFGWTR_EL2_nMASK
-#define __HDFGWTR_EL2_nMASK	GENMASK(62, 60)
+#define __HFGWTR_EL2_RES0	(__HFGRTR_EL2_RES0 | __HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_MASK	(__HFGRTR_EL2_MASK & ~__HFGRTR_ONLY_MASK)
+#define __HFGWTR_EL2_nMASK	~(__HFGWTR_EL2_RES0 | __HFGWTR_EL2_MASK)
+
+#define __HFGITR_EL2_RES0	HFGITR_EL2_RES0
+#define __HFGITR_EL2_MASK	(BIT(62) | BIT(60) | GENMASK(54, 0))
+#define __HFGITR_EL2_nMASK	~(__HFGITR_EL2_RES0 | __HFGITR_EL2_MASK)
+
+#define __HDFGRTR_EL2_RES0	HDFGRTR_EL2_RES0
+#define __HDFGRTR_EL2_MASK	(BIT(63) | GENMASK(58, 50) | GENMASK(48, 43) | \
+				 GENMASK(41, 40) | GENMASK(37, 22) | \
+				 GENMASK(19, 9) | GENMASK(7, 0))
+#define __HDFGRTR_EL2_nMASK	~(__HDFGRTR_EL2_RES0 | __HDFGRTR_EL2_MASK)
+
+#define __HDFGWTR_EL2_RES0	HDFGWTR_EL2_RES0
+#define __HDFGWTR_EL2_MASK	(GENMASK(57, 52) | GENMASK(50, 48) | \
+				 GENMASK(46, 44) | GENMASK(42, 41) | \
+				 GENMASK(37, 35) | GENMASK(33, 31) | \
+				 GENMASK(29, 23) | GENMASK(21, 10) | \
+				 GENMASK(8, 7) | GENMASK(5, 0))
+#define __HDFGWTR_EL2_nMASK	~(__HDFGWTR_EL2_RES0 | __HDFGWTR_EL2_MASK)
+
+#define __HAFGRTR_EL2_RES0	HAFGRTR_EL2_RES0
+#define __HAFGRTR_EL2_MASK	(GENMASK(49, 17) | GENMASK(4, 0))
+#define __HAFGRTR_EL2_nMASK	~(__HAFGRTR_EL2_RES0 | __HAFGRTR_EL2_MASK)
 
 /* Similar definitions for HCRX_EL2 */
-#define __HCRX_EL2_RES0		(GENMASK(63, 16) | GENMASK(13, 12))
-#define __HCRX_EL2_MASK		(0)
-#define __HCRX_EL2_nMASK	(GENMASK(15, 14) | GENMASK(4, 0))
+#define __HCRX_EL2_RES0         HCRX_EL2_RES0
+#define __HCRX_EL2_MASK		(BIT(6))
+#define __HCRX_EL2_nMASK	~(__HCRX_EL2_RES0 | __HCRX_EL2_MASK)
 
 /* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
 #define HPFAR_MASK	(~UL(0xf))
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 3d6725ff0..b804fe832 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -17,6 +17,7 @@
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_hyp.h>
+#include <asm/kvm_nested.h>
 #include <asm/ptrace.h>
 #include <asm/cputype.h>
 #include <asm/virt.h>
@@ -62,7 +63,7 @@ static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
 #else
 static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
 {
-	return test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features);
+	return vcpu_has_feature(vcpu, KVM_ARM_VCPU_EL1_32BIT);
 }
 #endif
 
@@ -71,14 +72,14 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
 	if (has_vhe() || has_hvhe())
 		vcpu->arch.hcr_el2 |= HCR_E2H;
-	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) {
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN)) {
 		/* route synchronous external abort exceptions to EL2 */
 		vcpu->arch.hcr_el2 |= HCR_TEA;
 		/* trap error record accesses */
 		vcpu->arch.hcr_el2 |= HCR_TERR;
 	}
 
-	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) {
+	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB)) {
 		vcpu->arch.hcr_el2 |= HCR_FWB;
 	} else {
 		/*
@@ -243,7 +244,7 @@ static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
 
 static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
 {
-	return __is_hyp_ctxt(&vcpu->arch.ctxt);
+	return vcpu_has_nv(vcpu) && __is_hyp_ctxt(&vcpu->arch.ctxt);
 }
 
 /*
@@ -399,14 +400,25 @@ static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC;
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_permission_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
+	return esr_fsc_is_permission_fault(kvm_vcpu_get_esr(vcpu));
 }
 
-static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+static inline
+bool kvm_vcpu_trap_is_translation_fault(const struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+	return esr_fsc_is_translation_fault(kvm_vcpu_get_esr(vcpu));
+}
+
+static inline
+u64 kvm_vcpu_trap_get_perm_fault_granule(const struct kvm_vcpu *vcpu)
+{
+	unsigned long esr = kvm_vcpu_get_esr(vcpu);
+
+	BUG_ON(!esr_fsc_is_permission_fault(esr));
+	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(esr & ESR_ELx_FSC_LEVEL));
 }
 
 static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
@@ -449,12 +461,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 		 * first), then a permission fault to allow the flags
 		 * to be set.
 		 */
-		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
-		case ESR_ELx_FSC_PERM:
-			return true;
-		default:
-			return false;
-		}
+		return kvm_vcpu_trap_is_permission_fault(vcpu);
 	}
 
 	if (kvm_vcpu_trap_is_iabt(vcpu))
@@ -465,7 +472,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 
 static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
 {
-	return vcpu_read_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
+	return __vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
 }
 
 static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
@@ -565,12 +572,6 @@ static __always_inline void kvm_incr_pc(struct kvm_vcpu *vcpu)
 		vcpu_set_flag((v), e);					\
 	} while (0)
 
-
-static inline bool vcpu_has_feature(struct kvm_vcpu *vcpu, int feature)
-{
-	return test_bit(feature, vcpu->arch.features);
-}
-
 static __always_inline void kvm_write_cptr_el2(u64 val)
 {
 	if (has_vhe() || has_hvhe())
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index af06ccb7e..21c57b812 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -27,6 +27,7 @@
 #include <asm/fpsimd.h>
 #include <asm/kvm.h>
 #include <asm/kvm_asm.h>
+#include <asm/vncr_mapping.h>
 
 #define __KVM_HAVE_ARCH_INTC_INITIALIZED
 
@@ -78,7 +79,7 @@ extern unsigned int __ro_after_init kvm_sve_max_vl;
 int __init kvm_arm_init_sve(void);
 
 u32 __attribute_const__ kvm_target_cpu(void);
-int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
+void kvm_reset_vcpu(struct kvm_vcpu *vcpu);
 void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu);
 
 struct kvm_hyp_memcache {
@@ -158,6 +159,16 @@ struct kvm_s2_mmu {
 	phys_addr_t	pgd_phys;
 	struct kvm_pgtable *pgt;
 
+	/*
+	 * VTCR value used on the host. For a non-NV guest (or a NV
+	 * guest that runs in a context where its own S2 doesn't
+	 * apply), its T0SZ value reflects that of the IPA size.
+	 *
+	 * For a shadow S2 MMU, T0SZ reflects the PARange exposed to
+	 * the guest.
+	 */
+	u64	vtcr;
+
 	/* The last vcpu id that ran on each physical CPU */
 	int __percpu *last_vcpu_ran;
 
@@ -202,12 +213,34 @@ struct kvm_protected_vm {
 	struct kvm_hyp_memcache teardown_mc;
 };
 
+struct kvm_mpidr_data {
+	u64			mpidr_mask;
+	DECLARE_FLEX_ARRAY(u16, cmpidr_to_idx);
+};
+
+static inline u16 kvm_mpidr_index(struct kvm_mpidr_data *data, u64 mpidr)
+{
+	unsigned long mask = data->mpidr_mask;
+	u64 aff = mpidr & MPIDR_HWID_BITMASK;
+	int nbits, bit, bit_idx = 0;
+	u16 index = 0;
+
+	/*
+	 * If this looks like RISC-V's BEXT or x86's PEXT
+	 * instructions, it isn't by accident.
+	 */
+	nbits = fls(mask);
+	for_each_set_bit(bit, &mask, nbits) {
+		index |= (aff & BIT(bit)) >> (bit - bit_idx);
+		bit_idx++;
+	}
+
+	return index;
+}
+
 struct kvm_arch {
 	struct kvm_s2_mmu mmu;
 
-	/* VTCR_EL2 value for this VM */
-	u64    vtcr;
-
 	/* Interrupt controller */
 	struct vgic_dist	vgic;
 
@@ -239,15 +272,16 @@ struct kvm_arch {
 #define KVM_ARCH_FLAG_VM_COUNTER_OFFSET			5
 	/* Timer PPIs made immutable */
 #define KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE		6
-	/* SMCCC filter initialized for the VM */
-#define KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED		7
 	/* Initial ID reg values loaded */
-#define KVM_ARCH_FLAG_ID_REGS_INITIALIZED		8
+#define KVM_ARCH_FLAG_ID_REGS_INITIALIZED		7
 	unsigned long flags;
 
 	/* VM-wide vCPU feature set */
 	DECLARE_BITMAP(vcpu_features, KVM_VCPU_MAX_FEATURES);
 
+	/* MPIDR to vcpu index mapping, optional */
+	struct kvm_mpidr_data *mpidr_data;
+
 	/*
 	 * VM-wide PMU filter, implemented as a bitmap and big enough for
 	 * up to 2^10 events (ARMv8.0) or 2^16 events (ARMv8.1+).
@@ -257,6 +291,9 @@ struct kvm_arch {
 
 	cpumask_var_t supported_cpus;
 
+	/* PMCR_EL0.N value for the guest */
+	u8 pmcr_n;
+
 	/* Hypercall features firmware registers' descriptor */
 	struct kvm_smccc_features smccc_feat;
 	struct maple_tree smccc_filter;
@@ -270,6 +307,7 @@ struct kvm_arch {
 	 * Atomic access to multiple idregs are guarded by kvm_arch.config_lock.
 	 */
 #define IDREG_IDX(id)		(((sys_reg_CRm(id) - 1) << 3) | sys_reg_Op2(id))
+#define IDX_IDREG(idx)		sys_reg(3, 0, 0, ((idx) >> 3) + 1, (idx) & Op2_mask)
 #define IDREG(kvm, id)		((kvm)->arch.id_regs[IDREG_IDX(id)])
 #define KVM_ARM_ID_REG_NUM	(IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
 	u64 id_regs[KVM_ARM_ID_REG_NUM];
@@ -288,33 +326,33 @@ struct kvm_vcpu_fault_info {
 	u64 disr_el1;		/* Deferred [SError] Status Register */
 };
 
+/*
+ * VNCR() just places the VNCR_capable registers in the enum after
+ * __VNCR_START__, and the value (after correction) to be an 8-byte offset
+ * from the VNCR base. As we don't require the enum to be otherwise ordered,
+ * we need the terrible hack below to ensure that we correctly size the
+ * sys_regs array, no matter what.
+ *
+ * The __MAX__ macro has been lifted from Sean Eron Anderson's wonderful
+ * treasure trove of bit hacks:
+ * https://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
+ */
+#define __MAX__(x,y)	((x) ^ (((x) ^ (y)) & -((x) < (y))))
+#define VNCR(r)						\
+	__before_##r,					\
+	r = __VNCR_START__ + ((VNCR_ ## r) / 8),	\
+	__after_##r = __MAX__(__before_##r - 1, r)
+
 enum vcpu_sysreg {
 	__INVALID_SYSREG__,   /* 0 is reserved as an invalid value */
 	MPIDR_EL1,	/* MultiProcessor Affinity Register */
 	CLIDR_EL1,	/* Cache Level ID Register */
 	CSSELR_EL1,	/* Cache Size Selection Register */
-	SCTLR_EL1,	/* System Control Register */
-	ACTLR_EL1,	/* Auxiliary Control Register */
-	CPACR_EL1,	/* Coprocessor Access Control */
-	ZCR_EL1,	/* SVE Control */
-	TTBR0_EL1,	/* Translation Table Base Register 0 */
-	TTBR1_EL1,	/* Translation Table Base Register 1 */
-	TCR_EL1,	/* Translation Control Register */
-	TCR2_EL1,	/* Extended Translation Control Register */
-	ESR_EL1,	/* Exception Syndrome Register */
-	AFSR0_EL1,	/* Auxiliary Fault Status Register 0 */
-	AFSR1_EL1,	/* Auxiliary Fault Status Register 1 */
-	FAR_EL1,	/* Fault Address Register */
-	MAIR_EL1,	/* Memory Attribute Indirection Register */
-	VBAR_EL1,	/* Vector Base Address Register */
-	CONTEXTIDR_EL1,	/* Context ID Register */
 	TPIDR_EL0,	/* Thread ID, User R/W */
 	TPIDRRO_EL0,	/* Thread ID, User R/O */
 	TPIDR_EL1,	/* Thread ID, Privileged */
-	AMAIR_EL1,	/* Aux Memory Attribute Indirection Register */
 	CNTKCTL_EL1,	/* Timer Control Register (EL1) */
 	PAR_EL1,	/* Physical Address Register */
-	MDSCR_EL1,	/* Monitor Debug System Control Register */
 	MDCCINT_EL1,	/* Monitor Debug Comms Channel Interrupt Enable Reg */
 	OSLSR_EL1,	/* OS Lock Status Register */
 	DISR_EL1,	/* Deferred Interrupt Status Register */
@@ -345,26 +383,11 @@ enum vcpu_sysreg {
 	APGAKEYLO_EL1,
 	APGAKEYHI_EL1,
 
-	ELR_EL1,
-	SP_EL1,
-	SPSR_EL1,
-
-	CNTVOFF_EL2,
-	CNTV_CVAL_EL0,
-	CNTV_CTL_EL0,
-	CNTP_CVAL_EL0,
-	CNTP_CTL_EL0,
-
 	/* Memory Tagging Extension registers */
 	RGSR_EL1,	/* Random Allocation Tag Seed Register */
 	GCR_EL1,	/* Tag Control Register */
-	TFSR_EL1,	/* Tag Fault Status Register (EL1) */
 	TFSRE0_EL1,	/* Tag Fault Status Register (EL0) */
 
-	/* Permission Indirection Extension registers */
-	PIR_EL1,       /* Permission Indirection Register 1 (EL1) */
-	PIRE0_EL1,     /*  Permission Indirection Register 0 (EL1) */
-
 	/* 32bit specific registers. */
 	DACR32_EL2,	/* Domain Access Control Register */
 	IFSR32_EL2,	/* Instruction Fault Status Register */
@@ -372,21 +395,14 @@ enum vcpu_sysreg {
 	DBGVCR32_EL2,	/* Debug Vector Catch Register */
 
 	/* EL2 registers */
-	VPIDR_EL2,	/* Virtualization Processor ID Register */
-	VMPIDR_EL2,	/* Virtualization Multiprocessor ID Register */
 	SCTLR_EL2,	/* System Control Register (EL2) */
 	ACTLR_EL2,	/* Auxiliary Control Register (EL2) */
-	HCR_EL2,	/* Hypervisor Configuration Register */
 	MDCR_EL2,	/* Monitor Debug Configuration Register (EL2) */
 	CPTR_EL2,	/* Architectural Feature Trap Register (EL2) */
-	HSTR_EL2,	/* Hypervisor System Trap Register */
 	HACR_EL2,	/* Hypervisor Auxiliary Control Register */
-	HCRX_EL2,	/* Extended Hypervisor Configuration Register */
 	TTBR0_EL2,	/* Translation Table Base Register 0 (EL2) */
 	TTBR1_EL2,	/* Translation Table Base Register 1 (EL2) */
 	TCR_EL2,	/* Translation Control Register (EL2) */
-	VTTBR_EL2,	/* Virtualization Translation Table Base Register */
-	VTCR_EL2,	/* Virtualization Translation Control Register */
 	SPSR_EL2,	/* EL2 saved program status register */
 	ELR_EL2,	/* EL2 exception link register */
 	AFSR0_EL2,	/* Auxiliary Fault Status Register 0 (EL2) */
@@ -399,19 +415,62 @@ enum vcpu_sysreg {
 	VBAR_EL2,	/* Vector Base Address Register (EL2) */
 	RVBAR_EL2,	/* Reset Vector Base Address Register */
 	CONTEXTIDR_EL2,	/* Context ID Register (EL2) */
-	TPIDR_EL2,	/* EL2 Software Thread ID Register */
 	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
 	SP_EL2,		/* EL2 Stack Pointer */
-	HFGRTR_EL2,
-	HFGWTR_EL2,
-	HFGITR_EL2,
-	HDFGRTR_EL2,
-	HDFGWTR_EL2,
 	CNTHP_CTL_EL2,
 	CNTHP_CVAL_EL2,
 	CNTHV_CTL_EL2,
 	CNTHV_CVAL_EL2,
 
+	__VNCR_START__,	/* Any VNCR-capable reg goes after this point */
+
+	VNCR(SCTLR_EL1),/* System Control Register */
+	VNCR(ACTLR_EL1),/* Auxiliary Control Register */
+	VNCR(CPACR_EL1),/* Coprocessor Access Control */
+	VNCR(ZCR_EL1),	/* SVE Control */
+	VNCR(TTBR0_EL1),/* Translation Table Base Register 0 */
+	VNCR(TTBR1_EL1),/* Translation Table Base Register 1 */
+	VNCR(TCR_EL1),	/* Translation Control Register */
+	VNCR(TCR2_EL1),	/* Extended Translation Control Register */
+	VNCR(ESR_EL1),	/* Exception Syndrome Register */
+	VNCR(AFSR0_EL1),/* Auxiliary Fault Status Register 0 */
+	VNCR(AFSR1_EL1),/* Auxiliary Fault Status Register 1 */
+	VNCR(FAR_EL1),	/* Fault Address Register */
+	VNCR(MAIR_EL1),	/* Memory Attribute Indirection Register */
+	VNCR(VBAR_EL1),	/* Vector Base Address Register */
+	VNCR(CONTEXTIDR_EL1),	/* Context ID Register */
+	VNCR(AMAIR_EL1),/* Aux Memory Attribute Indirection Register */
+	VNCR(MDSCR_EL1),/* Monitor Debug System Control Register */
+	VNCR(ELR_EL1),
+	VNCR(SP_EL1),
+	VNCR(SPSR_EL1),
+	VNCR(TFSR_EL1),	/* Tag Fault Status Register (EL1) */
+	VNCR(VPIDR_EL2),/* Virtualization Processor ID Register */
+	VNCR(VMPIDR_EL2),/* Virtualization Multiprocessor ID Register */
+	VNCR(HCR_EL2),	/* Hypervisor Configuration Register */
+	VNCR(HSTR_EL2),	/* Hypervisor System Trap Register */
+	VNCR(VTTBR_EL2),/* Virtualization Translation Table Base Register */
+	VNCR(VTCR_EL2),	/* Virtualization Translation Control Register */
+	VNCR(TPIDR_EL2),/* EL2 Software Thread ID Register */
+	VNCR(HCRX_EL2),	/* Extended Hypervisor Configuration Register */
+
+	/* Permission Indirection Extension registers */
+	VNCR(PIR_EL1),	 /* Permission Indirection Register 1 (EL1) */
+	VNCR(PIRE0_EL1), /*  Permission Indirection Register 0 (EL1) */
+
+	VNCR(HFGRTR_EL2),
+	VNCR(HFGWTR_EL2),
+	VNCR(HFGITR_EL2),
+	VNCR(HDFGRTR_EL2),
+	VNCR(HDFGWTR_EL2),
+	VNCR(HAFGRTR_EL2),
+
+	VNCR(CNTVOFF_EL2),
+	VNCR(CNTV_CVAL_EL0),
+	VNCR(CNTV_CTL_EL0),
+	VNCR(CNTP_CVAL_EL0),
+	VNCR(CNTP_CTL_EL0),
+
 	NR_SYS_REGS	/* Nothing after this line! */
 };
 
@@ -428,6 +487,9 @@ struct kvm_cpu_context {
 	u64 sys_regs[NR_SYS_REGS];
 
 	struct kvm_vcpu *__hyp_running_vcpu;
+
+	/* This pointer has to be 4kB aligned. */
+	u64 *vncr_array;
 };
 
 struct kvm_host_data {
@@ -574,9 +636,6 @@ struct kvm_vcpu_arch {
 	/* Cache some mmu pages needed inside spinlock regions */
 	struct kvm_mmu_memory_cache mmu_page_cache;
 
-	/* feature flags */
-	DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
-
 	/* Virtual SError ESR to restore when HCR_EL2.VSE is set */
 	u64 vsesr_el2;
 
@@ -793,8 +852,19 @@ struct kvm_vcpu_arch {
  * accessed by a running VCPU.  For example, for userspace access or
  * for system registers that are never context switched, but only
  * emulated.
+ *
+ * Don't bother with VNCR-based accesses in the nVHE code, it has no
+ * business dealing with NV.
  */
-#define __ctxt_sys_reg(c,r)	(&(c)->sys_regs[(r)])
+static inline u64 *__ctxt_sys_reg(const struct kvm_cpu_context *ctxt, int r)
+{
+#if !defined (__KVM_NVHE_HYPERVISOR__)
+	if (unlikely(cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) &&
+		     r >= __VNCR_START__ && ctxt->vncr_array))
+		return &ctxt->vncr_array[r - __VNCR_START__];
+#endif
+	return (u64 *)&ctxt->sys_regs[r];
+}
 
 #define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
 
@@ -838,6 +908,7 @@ static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
 	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case SPSR_EL1:		*val = read_sysreg_s(SYS_SPSR_EL12);	break;
 	case PAR_EL1:		*val = read_sysreg_par();		break;
 	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
@@ -882,6 +953,7 @@ static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
 	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
 	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
 	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
 	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
 	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
 	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
@@ -921,8 +993,6 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events);
 
-#define KVM_ARCH_WANT_MMU_NOTIFIER
-
 void kvm_arm_halt_guest(struct kvm *kvm);
 void kvm_arm_resume_guest(struct kvm *kvm);
 
@@ -1025,7 +1095,7 @@ int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
 extern unsigned int __ro_after_init kvm_arm_vmid_bits;
 int __init kvm_arm_vmid_alloc_init(void);
 void __init kvm_arm_vmid_alloc_free(void);
-void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
+bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
 void kvm_arm_vmid_clear_active(void);
 
 static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch)
@@ -1052,7 +1122,7 @@ static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt)
 
 static inline bool kvm_system_needs_idmapped_vectors(void)
 {
-	return cpus_have_const_cap(ARM64_SPECTRE_V3A);
+	return cpus_have_final_cap(ARM64_SPECTRE_V3A);
 }
 
 static inline void kvm_arch_sync_events(struct kvm *kvm) {}
@@ -1078,6 +1148,8 @@ int kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
 			       struct kvm_arm_copy_mte_tags *copy_tags);
 int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
 				    struct kvm_arm_counter_offset *offset);
+int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm,
+					struct reg_mask_range *range);
 
 /* Guest/host FPSIMD coordination helpers */
 int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu);
@@ -1109,8 +1181,8 @@ static inline bool kvm_set_pmuserenr(u64 val)
 }
 #endif
 
-void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu);
-void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu);
+void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu);
+void kvm_vcpu_put_vhe(struct kvm_vcpu *vcpu);
 
 int __init kvm_set_ipa_limit(void);
 
@@ -1142,6 +1214,13 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 #define kvm_vm_has_ran_once(kvm)					\
 	(test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags))
 
+static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
+{
+	return test_bit(feature, ka->vcpu_features);
+}
+
+#define vcpu_has_feature(v, f)	__vcpu_has_feature(&(v)->kvm->arch, (f))
+
 int kvm_trng_call(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 extern phys_addr_t hyp_mem_base;
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index 66efd67ea..145ce73fc 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -93,6 +93,8 @@ void __timer_disable_traps(struct kvm_vcpu *vcpu);
 void __sysreg_save_state_nvhe(struct kvm_cpu_context *ctxt);
 void __sysreg_restore_state_nvhe(struct kvm_cpu_context *ctxt);
 #else
+void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu);
+void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu);
 void sysreg_save_host_state_vhe(struct kvm_cpu_context *ctxt);
 void sysreg_restore_host_state_vhe(struct kvm_cpu_context *ctxt);
 void sysreg_save_guest_state_vhe(struct kvm_cpu_context *ctxt);
@@ -111,11 +113,6 @@ void __fpsimd_save_state(struct user_fpsimd_state *fp_regs);
 void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs);
 void __sve_restore_state(void *sve_pffr, u32 *fpsr);
 
-#ifndef __KVM_NVHE_HYPERVISOR__
-void activate_traps_vhe_load(struct kvm_vcpu *vcpu);
-void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu);
-#endif
-
 u64 __guest_enter(struct kvm_vcpu *vcpu);
 
 bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt, u32 func_id);
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 96a80e8f6..e3e793d0e 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -150,9 +150,9 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v)
  */
 #define KVM_PHYS_SHIFT	(40)
 
-#define kvm_phys_shift(kvm)		VTCR_EL2_IPA(kvm->arch.vtcr)
-#define kvm_phys_size(kvm)		(_AC(1, ULL) << kvm_phys_shift(kvm))
-#define kvm_phys_mask(kvm)		(kvm_phys_size(kvm) - _AC(1, ULL))
+#define kvm_phys_shift(mmu)		VTCR_EL2_IPA((mmu)->vtcr)
+#define kvm_phys_size(mmu)		(_AC(1, ULL) << kvm_phys_shift(mmu))
+#define kvm_phys_mask(mmu)		(kvm_phys_size(mmu) - _AC(1, ULL))
 
 #include <asm/kvm_pgtable.h>
 #include <asm/stage2_pgtable.h>
@@ -218,22 +218,40 @@ static inline void __clean_dcache_guest_page(void *va, size_t size)
 	 * faulting in pages. Furthermore, FWB implies IDC, so cleaning to
 	 * PoU is not required either in this case.
 	 */
-	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+	if (cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
 		return;
 
 	kvm_flush_dcache_to_poc(va, size);
 }
 
+static inline size_t __invalidate_icache_max_range(void)
+{
+	u8 iminline;
+	u64 ctr;
+
+	asm volatile(ALTERNATIVE_CB("movz %0, #0\n"
+				    "movk %0, #0, lsl #16\n"
+				    "movk %0, #0, lsl #32\n"
+				    "movk %0, #0, lsl #48\n",
+				    ARM64_ALWAYS_SYSTEM,
+				    kvm_compute_final_ctr_el0)
+		     : "=r" (ctr));
+
+	iminline = SYS_FIELD_GET(CTR_EL0, IminLine, ctr) + 2;
+	return MAX_DVM_OPS << iminline;
+}
+
 static inline void __invalidate_icache_guest_page(void *va, size_t size)
 {
-	if (icache_is_aliasing()) {
-		/* any kind of VIPT cache */
+	/*
+	 * Blow the whole I-cache if it is aliasing (i.e. VIPT) or the
+	 * invalidation range exceeds our arbitrary limit on invadations by
+	 * cache line.
+	 */
+	if (icache_is_aliasing() || size > __invalidate_icache_max_range())
 		icache_inval_all_pou();
-	} else if (read_sysreg(CurrentEL) != CurrentEL_EL1 ||
-		   !icache_is_vpipt()) {
-		/* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */
+	else
 		icache_inval_pou((unsigned long)va, (unsigned long)va + size);
-	}
 }
 
 void kvm_set_way_flush(struct kvm_vcpu *vcpu);
@@ -299,7 +317,7 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu)
 static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu,
 					  struct kvm_arch *arch)
 {
-	write_sysreg(arch->vtcr, vtcr_el2);
+	write_sysreg(mmu->vtcr, vtcr_el2);
 	write_sysreg(kvm_get_vttbr(mmu), vttbr_el2);
 
 	/*
diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h
index fa23cc9c2..488290535 100644
--- a/arch/arm64/include/asm/kvm_nested.h
+++ b/arch/arm64/include/asm/kvm_nested.h
@@ -2,21 +2,66 @@
 #ifndef __ARM64_KVM_NESTED_H
 #define __ARM64_KVM_NESTED_H
 
+#include <linux/bitfield.h>
 #include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
 
 static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
 {
 	return (!__is_defined(__KVM_NVHE_HYPERVISOR__) &&
 		cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) &&
-		test_bit(KVM_ARM_VCPU_HAS_EL2, vcpu->arch.features));
+		vcpu_has_feature(vcpu, KVM_ARM_VCPU_HAS_EL2));
 }
 
-extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
+/* Translation helpers from non-VHE EL2 to EL1 */
+static inline u64 tcr_el2_ps_to_tcr_el1_ips(u64 tcr_el2)
+{
+	return (u64)FIELD_GET(TCR_EL2_PS_MASK, tcr_el2) << TCR_IPS_SHIFT;
+}
+
+static inline u64 translate_tcr_el2_to_tcr_el1(u64 tcr)
+{
+	return TCR_EPD1_MASK |				/* disable TTBR1_EL1 */
+	       ((tcr & TCR_EL2_TBI) ? TCR_TBI0 : 0) |
+	       tcr_el2_ps_to_tcr_el1_ips(tcr) |
+	       (tcr & TCR_EL2_TG0_MASK) |
+	       (tcr & TCR_EL2_ORGN0_MASK) |
+	       (tcr & TCR_EL2_IRGN0_MASK) |
+	       (tcr & TCR_EL2_T0SZ_MASK);
+}
+
+static inline u64 translate_cptr_el2_to_cpacr_el1(u64 cptr_el2)
+{
+	u64 cpacr_el1 = 0;
 
-struct sys_reg_params;
-struct sys_reg_desc;
+	if (cptr_el2 & CPTR_EL2_TTA)
+		cpacr_el1 |= CPACR_ELx_TTA;
+	if (!(cptr_el2 & CPTR_EL2_TFP))
+		cpacr_el1 |= CPACR_ELx_FPEN;
+	if (!(cptr_el2 & CPTR_EL2_TZ))
+		cpacr_el1 |= CPACR_ELx_ZEN;
+
+	return cpacr_el1;
+}
+
+static inline u64 translate_sctlr_el2_to_sctlr_el1(u64 val)
+{
+	/* Only preserve the minimal set of bits we support */
+	val &= (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | SCTLR_ELx_SA |
+		SCTLR_ELx_I | SCTLR_ELx_IESB | SCTLR_ELx_WXN | SCTLR_ELx_EE);
+	val |= SCTLR_EL1_RES1;
+
+	return val;
+}
+
+static inline u64 translate_ttbr0_el2_to_ttbr0_el1(u64 ttbr0)
+{
+	/* Clear the ASID field */
+	return ttbr0 & ~GENMASK_ULL(63, 48);
+}
+
+extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
 
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r);
+int kvm_init_nv_sysregs(struct kvm *kvm);
 
 #endif /* __ARM64_KVM_NESTED_H */
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
index d3e354bb8..cfdf40f73 100644
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -11,7 +11,8 @@
 #include <linux/kvm_host.h>
 #include <linux/types.h>
 
-#define KVM_PGTABLE_MAX_LEVELS		4U
+#define KVM_PGTABLE_FIRST_LEVEL		-1
+#define KVM_PGTABLE_LAST_LEVEL		3
 
 /*
  * The largest supported block sizes for KVM (no 52-bit PA support):
@@ -20,17 +21,29 @@
  *  - 64K (level 2):	512MB
  */
 #ifdef CONFIG_ARM64_4K_PAGES
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1
 #else
-#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2U
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2
 #endif
 
+#define kvm_lpa2_is_enabled()		system_supports_lpa2()
+
+static inline u64 kvm_get_parange_max(void)
+{
+	if (kvm_lpa2_is_enabled() ||
+	   (IS_ENABLED(CONFIG_ARM64_PA_BITS_52) && PAGE_SHIFT == 16))
+		return ID_AA64MMFR0_EL1_PARANGE_52;
+	else
+		return ID_AA64MMFR0_EL1_PARANGE_48;
+}
+
 static inline u64 kvm_get_parange(u64 mmfr0)
 {
+	u64 parange_max = kvm_get_parange_max();
 	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
-	if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX)
-		parange = ID_AA64MMFR0_EL1_PARANGE_MAX;
+	if (parange > parange_max)
+		parange = parange_max;
 
 	return parange;
 }
@@ -41,6 +54,8 @@ typedef u64 kvm_pte_t;
 
 #define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
 #define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
+#define KVM_PTE_ADDR_MASK_LPA2		GENMASK(49, PAGE_SHIFT)
+#define KVM_PTE_ADDR_51_50_LPA2		GENMASK(9, 8)
 
 #define KVM_PHYS_INVALID		(-1ULL)
 
@@ -51,21 +66,34 @@ static inline bool kvm_pte_valid(kvm_pte_t pte)
 
 static inline u64 kvm_pte_to_phys(kvm_pte_t pte)
 {
-	u64 pa = pte & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16)
-		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	u64 pa;
+
+	if (kvm_lpa2_is_enabled()) {
+		pa = pte & KVM_PTE_ADDR_MASK_LPA2;
+		pa |= FIELD_GET(KVM_PTE_ADDR_51_50_LPA2, pte) << 50;
+	} else {
+		pa = pte & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16)
+			pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+	}
 
 	return pa;
 }
 
 static inline kvm_pte_t kvm_phys_to_pte(u64 pa)
 {
-	kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16) {
-		pa &= GENMASK(51, 48);
-		pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+	kvm_pte_t pte;
+
+	if (kvm_lpa2_is_enabled()) {
+		pte = pa & KVM_PTE_ADDR_MASK_LPA2;
+		pa &= GENMASK(51, 50);
+		pte |= FIELD_PREP(KVM_PTE_ADDR_51_50_LPA2, pa >> 50);
+	} else {
+		pte = pa & KVM_PTE_ADDR_MASK;
+		if (PAGE_SHIFT == 16) {
+			pa &= GENMASK(51, 48);
+			pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+		}
 	}
 
 	return pte;
@@ -76,28 +104,28 @@ static inline kvm_pfn_t kvm_pte_to_pfn(kvm_pte_t pte)
 	return __phys_to_pfn(kvm_pte_to_phys(pte));
 }
 
-static inline u64 kvm_granule_shift(u32 level)
+static inline u64 kvm_granule_shift(s8 level)
 {
-	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
+	/* Assumes KVM_PGTABLE_LAST_LEVEL is 3 */
 	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
 }
 
-static inline u64 kvm_granule_size(u32 level)
+static inline u64 kvm_granule_size(s8 level)
 {
 	return BIT(kvm_granule_shift(level));
 }
 
-static inline bool kvm_level_supports_block_mapping(u32 level)
+static inline bool kvm_level_supports_block_mapping(s8 level)
 {
 	return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL;
 }
 
 static inline u32 kvm_supported_block_sizes(void)
 {
-	u32 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
+	s8 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
 	u32 r = 0;
 
-	for (; level < KVM_PGTABLE_MAX_LEVELS; level++)
+	for (; level <= KVM_PGTABLE_LAST_LEVEL; level++)
 		r |= BIT(kvm_granule_shift(level));
 
 	return r;
@@ -142,7 +170,7 @@ struct kvm_pgtable_mm_ops {
 	void*		(*zalloc_page)(void *arg);
 	void*		(*zalloc_pages_exact)(size_t size);
 	void		(*free_pages_exact)(void *addr, size_t size);
-	void		(*free_unlinked_table)(void *addr, u32 level);
+	void		(*free_unlinked_table)(void *addr, s8 level);
 	void		(*get_page)(void *addr);
 	void		(*put_page)(void *addr);
 	int		(*page_count)(void *addr);
@@ -238,7 +266,7 @@ struct kvm_pgtable_visit_ctx {
 	u64					start;
 	u64					addr;
 	u64					end;
-	u32					level;
+	s8					level;
 	enum kvm_pgtable_walk_flags		flags;
 };
 
@@ -341,7 +369,7 @@ static inline bool kvm_pgtable_walk_lock_held(void)
  */
 struct kvm_pgtable {
 	u32					ia_bits;
-	u32					start_level;
+	s8					start_level;
 	kvm_pteref_t				pgd;
 	struct kvm_pgtable_mm_ops		*mm_ops;
 
@@ -475,7 +503,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
  * The page-table is assumed to be unreachable by any hardware walkers prior to
  * freeing and therefore no TLB invalidation is performed.
  */
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level);
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level);
 
 /**
  * kvm_pgtable_stage2_create_unlinked() - Create an unlinked stage-2 paging structure.
@@ -499,7 +527,7 @@ void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *p
  * an ERR_PTR(error) on failure.
  */
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte);
 
@@ -725,7 +753,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
  * Return: 0 on success, negative error code on failure.
  */
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level);
+			 kvm_pte_t *ptep, s8 *level);
 
 /**
  * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a
diff --git a/arch/arm64/include/asm/kvm_pkvm.h b/arch/arm64/include/asm/kvm_pkvm.h
index e46250a02..ad9cfb5c1 100644
--- a/arch/arm64/include/asm/kvm_pkvm.h
+++ b/arch/arm64/include/asm/kvm_pkvm.h
@@ -56,10 +56,11 @@ static inline unsigned long hyp_vm_table_pages(void)
 
 static inline unsigned long __hyp_pgtable_max_pages(unsigned long nr_pages)
 {
-	unsigned long total = 0, i;
+	unsigned long total = 0;
+	int i;
 
 	/* Provision the worst case scenario */
-	for (i = 0; i < KVM_PGTABLE_MAX_LEVELS; i++) {
+	for (i = KVM_PGTABLE_FIRST_LEVEL; i <= KVM_PGTABLE_LAST_LEVEL; i++) {
 		nr_pages = DIV_ROUND_UP(nr_pages, PTRS_PER_PTE);
 		total += nr_pages;
 	}
diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h
index cbbcdc35c..3129a5819 100644
--- a/arch/arm64/include/asm/lse.h
+++ b/arch/arm64/include/asm/lse.h
@@ -16,14 +16,9 @@
 #include <asm/atomic_lse.h>
 #include <asm/cpucaps.h>
 
-static __always_inline bool system_uses_lse_atomics(void)
-{
-	return alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS);
-}
-
 #define __lse_ll_sc_body(op, ...)					\
 ({									\
-	system_uses_lse_atomics() ?					\
+	alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS) ?		\
 		__lse_##op(__VA_ARGS__) :				\
 		__ll_sc_##op(__VA_ARGS__);				\
 })
@@ -34,8 +29,6 @@ static __always_inline bool system_uses_lse_atomics(void)
 
 #else	/* CONFIG_ARM64_LSE_ATOMICS */
 
-static inline bool system_uses_lse_atomics(void) { return false; }
-
 #define __lse_ll_sc_body(op, ...)		__ll_sc_##op(__VA_ARGS__)
 
 #define ARM64_LSE_ATOMIC_INSN(llsc, lse)	llsc
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index fde4186cc..d82305ab4 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -65,15 +65,41 @@
 #define KERNEL_END		_end
 
 /*
- * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
- * address space for the shadow region respectively. They can bloat the stack
- * significantly, so double the (minimum) stack size when they are in use.
+ * Generic and Software Tag-Based KASAN modes require 1/8th and 1/16th of the
+ * kernel virtual address space for storing the shadow memory respectively.
+ *
+ * The mapping between a virtual memory address and its corresponding shadow
+ * memory address is defined based on the formula:
+ *
+ *     shadow_addr = (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * where KASAN_SHADOW_SCALE_SHIFT is the order of the number of bits that map
+ * to a single shadow byte and KASAN_SHADOW_OFFSET is a constant that offsets
+ * the mapping. Note that KASAN_SHADOW_OFFSET does not point to the start of
+ * the shadow memory region.
+ *
+ * Based on this mapping, we define two constants:
+ *
+ *     KASAN_SHADOW_START: the start of the shadow memory region;
+ *     KASAN_SHADOW_END: the end of the shadow memory region.
+ *
+ * KASAN_SHADOW_END is defined first as the shadow address that corresponds to
+ * the upper bound of possible virtual kernel memory addresses UL(1) << 64
+ * according to the mapping formula.
+ *
+ * KASAN_SHADOW_START is defined second based on KASAN_SHADOW_END. The shadow
+ * memory start must map to the lowest possible kernel virtual memory address
+ * and thus it depends on the actual bitness of the address space.
+ *
+ * As KASAN inserts redzones between stack variables, this increases the stack
+ * memory usage significantly. Thus, we double the (minimum) stack size.
  */
 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
 #define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
-#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
-					+ KASAN_SHADOW_OFFSET)
-#define PAGE_END		(KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) + KASAN_SHADOW_OFFSET)
+#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (UL(1) << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_START	_KASAN_SHADOW_START(vabits_actual)
+#define PAGE_END		KASAN_SHADOW_START
 #define KASAN_THREAD_SHIFT	1
 #else
 #define KASAN_THREAD_SHIFT	0
@@ -182,6 +208,7 @@
 #include <linux/types.h>
 #include <asm/boot.h>
 #include <asm/bug.h>
+#include <asm/sections.h>
 
 #if VA_BITS > 48
 extern u64			vabits_actual;
@@ -193,15 +220,12 @@ extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
 #define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
 
-/* the virtual base of the kernel image */
-extern u64			kimage_vaddr;
-
 /* the offset between the kernel virtual and physical mappings */
 extern u64			kimage_voffset;
 
 static inline unsigned long kaslr_offset(void)
 {
-	return kimage_vaddr - KIMAGE_VADDR;
+	return (u64)&_text - KIMAGE_VADDR;
 }
 
 #ifdef CONFIG_RANDOMIZE_BASE
@@ -407,6 +431,5 @@ void dump_mem_limit(void);
 #define INIT_MEMBLOCK_MEMORY_REGIONS	(INIT_MEMBLOCK_REGIONS * 8)
 #endif
 
-#include <asm-generic/memory_model.h>
 
 #endif /* __ASM_MEMORY_H */
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 94b68850c..2fcf51231 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -57,7 +57,7 @@ typedef struct {
 
 static inline bool arm64_kernel_unmapped_at_el0(void)
 {
-	return cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0);
+	return alternative_has_cap_unlikely(ARM64_UNMAP_KERNEL_AT_EL0);
 }
 
 extern void arm64_memblock_init(void);
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index a6fb32542..9ce420050 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -152,7 +152,7 @@ static inline void cpu_install_ttbr0(phys_addr_t ttbr0, unsigned long t0sz)
  * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
  * avoiding the possibility of conflicting TLB entries being allocated.
  */
-static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
+static inline void __cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap, bool cnp)
 {
 	typedef void (ttbr_replace_func)(phys_addr_t);
 	extern ttbr_replace_func idmap_cpu_replace_ttbr1;
@@ -162,17 +162,8 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
 	/* phys_to_ttbr() zeros lower 2 bits of ttbr with 52-bit PA */
 	phys_addr_t ttbr1 = phys_to_ttbr(virt_to_phys(pgdp));
 
-	if (system_supports_cnp() && !WARN_ON(pgdp != lm_alias(swapper_pg_dir))) {
-		/*
-		 * cpu_replace_ttbr1() is used when there's a boot CPU
-		 * up (i.e. cpufeature framework is not up yet) and
-		 * latter only when we enable CNP via cpufeature's
-		 * enable() callback.
-		 * Also we rely on the system_cpucaps bit being set before
-		 * calling the enable() function.
-		 */
+	if (cnp)
 		ttbr1 |= TTBR_CNP_BIT;
-	}
 
 	replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1);
 
@@ -189,6 +180,21 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
 	cpu_uninstall_idmap();
 }
 
+static inline void cpu_enable_swapper_cnp(void)
+{
+	__cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir, true);
+}
+
+static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
+{
+	/*
+	 * Only for early TTBR1 replacement before cpucaps are finalized and
+	 * before we've decided whether to use CNP.
+	 */
+	WARN_ON(system_capabilities_finalized());
+	__cpu_replace_ttbr1(pgdp, idmap, false);
+}
+
 /*
  * It would be nice to return ASIDs back to the allocator, but unfortunately
  * that introduces a race with a generation rollover where we could erroneously
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
index bfa6638b4..79550b22b 100644
--- a/arch/arm64/include/asm/module.h
+++ b/arch/arm64/include/asm/module.h
@@ -44,8 +44,7 @@ struct plt_entry {
 
 static inline bool is_forbidden_offset_for_adrp(void *place)
 {
-	return IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) &&
-	       cpus_have_const_cap(ARM64_WORKAROUND_843419) &&
+	return cpus_have_final_cap(ARM64_WORKAROUND_843419) &&
 	       ((u64)place & 0xfff) >= 0xff8;
 }
 
diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h
index 4cedbaa16..91fbd5c8a 100644
--- a/arch/arm64/include/asm/mte.h
+++ b/arch/arm64/include/asm/mte.h
@@ -90,7 +90,7 @@ static inline bool try_page_mte_tagging(struct page *page)
 }
 
 void mte_zero_clear_page_tags(void *addr);
-void mte_sync_tags(pte_t pte);
+void mte_sync_tags(pte_t pte, unsigned int nr_pages);
 void mte_copy_page_tags(void *kto, const void *kfrom);
 void mte_thread_init_user(void);
 void mte_thread_switch(struct task_struct *next);
@@ -122,7 +122,7 @@ static inline bool try_page_mte_tagging(struct page *page)
 static inline void mte_zero_clear_page_tags(void *addr)
 {
 }
-static inline void mte_sync_tags(pte_t pte)
+static inline void mte_sync_tags(pte_t pte, unsigned int nr_pages)
 {
 }
 static inline void mte_copy_page_tags(void *kto, const void *kfrom)
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index eed814b00..483dbfa39 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -71,15 +71,13 @@ extern bool arm64_use_ng_mappings;
 #define PTE_MAYBE_NG		(arm64_use_ng_mappings ? PTE_NG : 0)
 #define PMD_MAYBE_NG		(arm64_use_ng_mappings ? PMD_SECT_NG : 0)
 
+#define lpa2_is_enabled()	false
+
 /*
  * If we have userspace only BTI we don't want to mark kernel pages
  * guarded even if the system does support BTI.
  */
-#ifdef CONFIG_ARM64_BTI_KERNEL
-#define PTE_MAYBE_GP		(system_supports_bti() ? PTE_GP : 0)
-#else
-#define PTE_MAYBE_GP		0
-#endif
+#define PTE_MAYBE_GP		(system_supports_bti_kernel() ? PTE_GP : 0)
 
 #define PAGE_KERNEL		__pgprot(_PAGE_KERNEL)
 #define PAGE_KERNEL_RO		__pgprot(_PAGE_KERNEL_RO)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 07bdf5dd8..79ce70fbb 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -325,8 +325,7 @@ static inline void __check_safe_pte_update(struct mm_struct *mm, pte_t *ptep,
 		     __func__, pte_val(old_pte), pte_val(pte));
 }
 
-static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
-				pte_t *ptep, pte_t pte)
+static inline void __sync_cache_and_tags(pte_t pte, unsigned int nr_pages)
 {
 	if (pte_present(pte) && pte_user_exec(pte) && !pte_special(pte))
 		__sync_icache_dcache(pte);
@@ -339,24 +338,22 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (system_supports_mte() && pte_access_permitted(pte, false) &&
 	    !pte_special(pte) && pte_tagged(pte))
-		mte_sync_tags(pte);
-
-	__check_safe_pte_update(mm, ptep, pte);
-
-	set_pte(ptep, pte);
+		mte_sync_tags(pte, nr_pages);
 }
 
-static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pte, unsigned int nr)
+static inline void set_ptes(struct mm_struct *mm,
+			    unsigned long __always_unused addr,
+			    pte_t *ptep, pte_t pte, unsigned int nr)
 {
 	page_table_check_ptes_set(mm, ptep, pte, nr);
+	__sync_cache_and_tags(pte, nr);
 
 	for (;;) {
-		__set_pte_at(mm, addr, ptep, pte);
+		__check_safe_pte_update(mm, ptep, pte);
+		set_pte(ptep, pte);
 		if (--nr == 0)
 			break;
 		ptep++;
-		addr += PAGE_SIZE;
 		pte_val(pte) += PAGE_SIZE;
 	}
 }
@@ -531,18 +528,29 @@ static inline pmd_t pmd_mkdevmap(pmd_t pmd)
 #define pud_pfn(pud)		((__pud_to_phys(pud) & PUD_MASK) >> PAGE_SHIFT)
 #define pfn_pud(pfn,prot)	__pud(__phys_to_pud_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
+static inline void __set_pte_at(struct mm_struct *mm,
+				unsigned long __always_unused addr,
+				pte_t *ptep, pte_t pte, unsigned int nr)
+{
+	__sync_cache_and_tags(pte, nr);
+	__check_safe_pte_update(mm, ptep, pte);
+	set_pte(ptep, pte);
+}
+
 static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 			      pmd_t *pmdp, pmd_t pmd)
 {
 	page_table_check_pmd_set(mm, pmdp, pmd);
-	return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd));
+	return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd),
+						PMD_SIZE >> PAGE_SHIFT);
 }
 
 static inline void set_pud_at(struct mm_struct *mm, unsigned long addr,
 			      pud_t *pudp, pud_t pud)
 {
 	page_table_check_pud_set(mm, pudp, pud);
-	return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud));
+	return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud),
+						PUD_SIZE >> PAGE_SHIFT);
 }
 
 #define __p4d_to_phys(p4d)	__pte_to_phys(p4d_pte(p4d))
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index e5bc54522..5b0a04810 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -167,6 +167,9 @@ struct thread_struct {
 	unsigned long		fault_address;	/* fault info */
 	unsigned long		fault_code;	/* ESR_EL1 value */
 	struct debug_info	debug;		/* debugging */
+
+	struct user_fpsimd_state	kernel_fpsimd_state;
+	unsigned int			kernel_fpsimd_cpu;
 #ifdef CONFIG_ARM64_PTR_AUTH
 	struct ptrauth_keys_user	keys_user;
 #ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h
index 6a75d7ecd..8e86c9e70 100644
--- a/arch/arm64/include/asm/simd.h
+++ b/arch/arm64/include/asm/simd.h
@@ -12,8 +12,6 @@
 #include <linux/preempt.h>
 #include <linux/types.h>
 
-DECLARE_PER_CPU(bool, fpsimd_context_busy);
-
 #ifdef CONFIG_KERNEL_MODE_NEON
 
 /*
@@ -28,17 +26,10 @@ static __must_check inline bool may_use_simd(void)
 	/*
 	 * We must make sure that the SVE has been initialized properly
 	 * before using the SIMD in kernel.
-	 * fpsimd_context_busy is only set while preemption is disabled,
-	 * and is clear whenever preemption is enabled. Since
-	 * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy
-	 * cannot change under our feet -- if it's set we cannot be
-	 * migrated, and if it's clear we cannot be migrated to a CPU
-	 * where it is set.
 	 */
 	return !WARN_ON(!system_capabilities_finalized()) &&
 	       system_supports_fpsimd() &&
-	       !in_hardirq() && !irqs_disabled() && !in_nmi() &&
-	       !this_cpu_read(fpsimd_context_busy);
+	       !in_hardirq() && !irqs_disabled() && !in_nmi();
 }
 
 #else /* ! CONFIG_KERNEL_MODE_NEON */
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index 9b31e6d0d..efb13112b 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -89,9 +89,9 @@ extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
 #ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
-extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
+extern void arch_send_wakeup_ipi(unsigned int cpu);
 #else
-static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+static inline void arch_send_wakeup_ipi(unsigned int cpu)
 {
 	BUILD_BUG();
 }
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
index 5f5437621..8a8acc220 100644
--- a/arch/arm64/include/asm/sparsemem.h
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -10,7 +10,7 @@
 /*
  * Section size must be at least 512MB for 64K base
  * page size config. Otherwise it will be less than
- * MAX_ORDER and the build process will fail.
+ * MAX_PAGE_ORDER and the build process will fail.
  */
 #ifdef CONFIG_ARM64_64K_PAGES
 #define SECTION_SIZE_BITS 29
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index 9cc501450..0c4d9045c 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -13,8 +13,8 @@
 #define __BP_HARDEN_HYP_VECS_SZ	((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K)
 
 #ifndef __ASSEMBLY__
-
-#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <asm/percpu.h>
 
 #include <asm/cpufeature.h>
 #include <asm/virt.h>
@@ -73,7 +73,7 @@ static __always_inline void arm64_apply_bp_hardening(void)
 {
 	struct bp_hardening_data *d;
 
-	if (!cpus_have_const_cap(ARM64_SPECTRE_V2))
+	if (!alternative_has_cap_unlikely(ARM64_SPECTRE_V2))
 		return;
 
 	d = this_cpu_ptr(&bp_hardening_data);
diff --git a/arch/arm64/include/asm/stacktrace/common.h b/arch/arm64/include/asm/stacktrace/common.h
index 508f734de..f63dc654e 100644
--- a/arch/arm64/include/asm/stacktrace/common.h
+++ b/arch/arm64/include/asm/stacktrace/common.h
@@ -9,7 +9,6 @@
 #ifndef __ASM_STACKTRACE_COMMON_H
 #define __ASM_STACKTRACE_COMMON_H
 
-#include <linux/kprobes.h>
 #include <linux/types.h>
 
 struct stack_info {
@@ -23,12 +22,6 @@ struct stack_info {
  * @fp:          The fp value in the frame record (or the real fp)
  * @pc:          The lr value in the frame record (or the real lr)
  *
- * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
- *               associated with the most recently encountered replacement lr
- *               value.
- *
- * @task:        The task being unwound.
- *
  * @stack:       The stack currently being unwound.
  * @stacks:      An array of stacks which can be unwound.
  * @nr_stacks:   The number of stacks in @stacks.
@@ -36,10 +29,6 @@ struct stack_info {
 struct unwind_state {
 	unsigned long fp;
 	unsigned long pc;
-#ifdef CONFIG_KRETPROBES
-	struct llist_node *kr_cur;
-#endif
-	struct task_struct *task;
 
 	struct stack_info stack;
 	struct stack_info *stacks;
@@ -66,14 +55,8 @@ static inline bool stackinfo_on_stack(const struct stack_info *info,
 	return true;
 }
 
-static inline void unwind_init_common(struct unwind_state *state,
-				      struct task_struct *task)
+static inline void unwind_init_common(struct unwind_state *state)
 {
-	state->task = task;
-#ifdef CONFIG_KRETPROBES
-	state->kr_cur = NULL;
-#endif
-
 	state->stack = stackinfo_get_unknown();
 }
 
diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h
index 25ab83a31..44759281d 100644
--- a/arch/arm64/include/asm/stacktrace/nvhe.h
+++ b/arch/arm64/include/asm/stacktrace/nvhe.h
@@ -31,7 +31,7 @@ static inline void kvm_nvhe_unwind_init(struct unwind_state *state,
 					unsigned long fp,
 					unsigned long pc)
 {
-	unwind_init_common(state, NULL);
+	unwind_init_common(state);
 
 	state->fp = fp;
 	state->pc = pc;
diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h
index c8dca8ae3..23d27623e 100644
--- a/arch/arm64/include/asm/stage2_pgtable.h
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@@ -21,13 +21,13 @@
  * (IPA_SHIFT - 4).
  */
 #define stage2_pgtable_levels(ipa)	ARM64_HW_PGTABLE_LEVELS((ipa) - 4)
-#define kvm_stage2_levels(kvm)		VTCR_EL2_LVLS(kvm->arch.vtcr)
+#define kvm_stage2_levels(mmu)		VTCR_EL2_LVLS((mmu)->vtcr)
 
 /*
  * kvm_mmmu_cache_min_pages() is the number of pages required to install
  * a stage-2 translation. We pre-allocate the entry level page table at
  * the VM creation.
  */
-#define kvm_mmu_cache_min_pages(kvm)	(kvm_stage2_levels(kvm) - 1)
+#define kvm_mmu_cache_min_pages(mmu)	(kvm_stage2_levels(mmu) - 1)
 
 #endif	/* __ARM64_S2_PGTABLE_H_ */
diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h
index 7a0e7b59b..abb57bc54 100644
--- a/arch/arm64/include/asm/syscall_wrapper.h
+++ b/arch/arm64/include/asm/syscall_wrapper.h
@@ -51,7 +51,6 @@
 	ALLOW_ERROR_INJECTION(__arm64_sys##name, ERRNO);			\
 	static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
 	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
-	asmlinkage long __arm64_sys##name(const struct pt_regs *regs);		\
 	asmlinkage long __arm64_sys##name(const struct pt_regs *regs)		\
 	{									\
 		return __se_sys##name(SC_ARM64_REGS_TO_ARGS(x,__VA_ARGS__));	\
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 38296579a..c3b19b376 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -270,6 +270,8 @@
 /* ETM */
 #define SYS_TRCOSLAR			sys_reg(2, 1, 1, 0, 4)
 
+#define SYS_BRBCR_EL2			sys_reg(2, 4, 9, 0, 0)
+
 #define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
 #define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
 #define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
@@ -484,6 +486,7 @@
 
 #define SYS_SCTLR_EL2			sys_reg(3, 4, 1, 0, 0)
 #define SYS_ACTLR_EL2			sys_reg(3, 4, 1, 0, 1)
+#define SYS_SCTLR2_EL2			sys_reg(3, 4, 1, 0, 3)
 #define SYS_HCR_EL2			sys_reg(3, 4, 1, 1, 0)
 #define SYS_MDCR_EL2			sys_reg(3, 4, 1, 1, 1)
 #define SYS_CPTR_EL2			sys_reg(3, 4, 1, 1, 2)
@@ -497,10 +500,15 @@
 #define SYS_VTCR_EL2			sys_reg(3, 4, 2, 1, 2)
 
 #define SYS_TRFCR_EL2			sys_reg(3, 4, 1, 2, 1)
+#define SYS_VNCR_EL2			sys_reg(3, 4, 2, 2, 0)
 #define SYS_HAFGRTR_EL2			sys_reg(3, 4, 3, 1, 6)
 #define SYS_SPSR_EL2			sys_reg(3, 4, 4, 0, 0)
 #define SYS_ELR_EL2			sys_reg(3, 4, 4, 0, 1)
 #define SYS_SP_EL1			sys_reg(3, 4, 4, 1, 0)
+#define SYS_SPSR_irq			sys_reg(3, 4, 4, 3, 0)
+#define SYS_SPSR_abt			sys_reg(3, 4, 4, 3, 1)
+#define SYS_SPSR_und			sys_reg(3, 4, 4, 3, 2)
+#define SYS_SPSR_fiq			sys_reg(3, 4, 4, 3, 3)
 #define SYS_IFSR32_EL2			sys_reg(3, 4, 5, 0, 1)
 #define SYS_AFSR0_EL2			sys_reg(3, 4, 5, 1, 0)
 #define SYS_AFSR1_EL2			sys_reg(3, 4, 5, 1, 1)
@@ -514,6 +522,18 @@
 
 #define SYS_MAIR_EL2			sys_reg(3, 4, 10, 2, 0)
 #define SYS_AMAIR_EL2			sys_reg(3, 4, 10, 3, 0)
+#define SYS_MPAMHCR_EL2			sys_reg(3, 4, 10, 4, 0)
+#define SYS_MPAMVPMV_EL2		sys_reg(3, 4, 10, 4, 1)
+#define SYS_MPAM2_EL2			sys_reg(3, 4, 10, 5, 0)
+#define __SYS__MPAMVPMx_EL2(x)		sys_reg(3, 4, 10, 6, x)
+#define SYS_MPAMVPM0_EL2		__SYS__MPAMVPMx_EL2(0)
+#define SYS_MPAMVPM1_EL2		__SYS__MPAMVPMx_EL2(1)
+#define SYS_MPAMVPM2_EL2		__SYS__MPAMVPMx_EL2(2)
+#define SYS_MPAMVPM3_EL2		__SYS__MPAMVPMx_EL2(3)
+#define SYS_MPAMVPM4_EL2		__SYS__MPAMVPMx_EL2(4)
+#define SYS_MPAMVPM5_EL2		__SYS__MPAMVPMx_EL2(5)
+#define SYS_MPAMVPM6_EL2		__SYS__MPAMVPMx_EL2(6)
+#define SYS_MPAMVPM7_EL2		__SYS__MPAMVPMx_EL2(7)
 
 #define SYS_VBAR_EL2			sys_reg(3, 4, 12, 0, 0)
 #define SYS_RVBAR_EL2			sys_reg(3, 4, 12, 0, 1)
@@ -562,24 +582,49 @@
 
 #define SYS_CONTEXTIDR_EL2		sys_reg(3, 4, 13, 0, 1)
 #define SYS_TPIDR_EL2			sys_reg(3, 4, 13, 0, 2)
+#define SYS_SCXTNUM_EL2			sys_reg(3, 4, 13, 0, 7)
+
+#define __AMEV_op2(m)			(m & 0x7)
+#define __AMEV_CRm(n, m)		(n | ((m & 0x8) >> 3))
+#define __SYS__AMEVCNTVOFF0n_EL2(m)	sys_reg(3, 4, 13, __AMEV_CRm(0x8, m), __AMEV_op2(m))
+#define SYS_AMEVCNTVOFF0n_EL2(m)	__SYS__AMEVCNTVOFF0n_EL2(m)
+#define __SYS__AMEVCNTVOFF1n_EL2(m)	sys_reg(3, 4, 13, __AMEV_CRm(0xA, m), __AMEV_op2(m))
+#define SYS_AMEVCNTVOFF1n_EL2(m)	__SYS__AMEVCNTVOFF1n_EL2(m)
 
 #define SYS_CNTVOFF_EL2			sys_reg(3, 4, 14, 0, 3)
 #define SYS_CNTHCTL_EL2			sys_reg(3, 4, 14, 1, 0)
+#define SYS_CNTHP_TVAL_EL2		sys_reg(3, 4, 14, 2, 0)
+#define SYS_CNTHP_CTL_EL2		sys_reg(3, 4, 14, 2, 1)
+#define SYS_CNTHP_CVAL_EL2		sys_reg(3, 4, 14, 2, 2)
+#define SYS_CNTHV_TVAL_EL2		sys_reg(3, 4, 14, 3, 0)
+#define SYS_CNTHV_CTL_EL2		sys_reg(3, 4, 14, 3, 1)
+#define SYS_CNTHV_CVAL_EL2		sys_reg(3, 4, 14, 3, 2)
 
 /* VHE encodings for architectural EL0/1 system registers */
+#define SYS_BRBCR_EL12			sys_reg(2, 5, 9, 0, 0)
 #define SYS_SCTLR_EL12			sys_reg(3, 5, 1, 0, 0)
+#define SYS_CPACR_EL12			sys_reg(3, 5, 1, 0, 2)
+#define SYS_SCTLR2_EL12			sys_reg(3, 5, 1, 0, 3)
+#define SYS_ZCR_EL12			sys_reg(3, 5, 1, 2, 0)
+#define SYS_TRFCR_EL12			sys_reg(3, 5, 1, 2, 1)
+#define SYS_SMCR_EL12			sys_reg(3, 5, 1, 2, 6)
 #define SYS_TTBR0_EL12			sys_reg(3, 5, 2, 0, 0)
 #define SYS_TTBR1_EL12			sys_reg(3, 5, 2, 0, 1)
 #define SYS_TCR_EL12			sys_reg(3, 5, 2, 0, 2)
+#define SYS_TCR2_EL12			sys_reg(3, 5, 2, 0, 3)
 #define SYS_SPSR_EL12			sys_reg(3, 5, 4, 0, 0)
 #define SYS_ELR_EL12			sys_reg(3, 5, 4, 0, 1)
 #define SYS_AFSR0_EL12			sys_reg(3, 5, 5, 1, 0)
 #define SYS_AFSR1_EL12			sys_reg(3, 5, 5, 1, 1)
 #define SYS_ESR_EL12			sys_reg(3, 5, 5, 2, 0)
 #define SYS_TFSR_EL12			sys_reg(3, 5, 5, 6, 0)
+#define SYS_FAR_EL12			sys_reg(3, 5, 6, 0, 0)
+#define SYS_PMSCR_EL12			sys_reg(3, 5, 9, 9, 0)
 #define SYS_MAIR_EL12			sys_reg(3, 5, 10, 2, 0)
 #define SYS_AMAIR_EL12			sys_reg(3, 5, 10, 3, 0)
 #define SYS_VBAR_EL12			sys_reg(3, 5, 12, 0, 0)
+#define SYS_CONTEXTIDR_EL12		sys_reg(3, 5, 13, 0, 1)
+#define SYS_SCXTNUM_EL12		sys_reg(3, 5, 13, 0, 7)
 #define SYS_CNTKCTL_EL12		sys_reg(3, 5, 14, 1, 0)
 #define SYS_CNTP_TVAL_EL02		sys_reg(3, 5, 14, 2, 0)
 #define SYS_CNTP_CTL_EL02		sys_reg(3, 5, 14, 2, 1)
@@ -600,6 +645,7 @@
 #define OP_AT_S1E0W	sys_insn(AT_Op0, 0, AT_CRn, 8, 3)
 #define OP_AT_S1E1RP	sys_insn(AT_Op0, 0, AT_CRn, 9, 0)
 #define OP_AT_S1E1WP	sys_insn(AT_Op0, 0, AT_CRn, 9, 1)
+#define OP_AT_S1E1A	sys_insn(AT_Op0, 0, AT_CRn, 9, 2)
 #define OP_AT_S1E2R	sys_insn(AT_Op0, 4, AT_CRn, 8, 0)
 #define OP_AT_S1E2W	sys_insn(AT_Op0, 4, AT_CRn, 8, 1)
 #define OP_AT_S12E1R	sys_insn(AT_Op0, 4, AT_CRn, 8, 4)
@@ -736,10 +782,16 @@
 #define OP_TLBI_VMALLS12E1NXS		sys_insn(1, 4, 9, 7, 6)
 
 /* Misc instructions */
+#define OP_GCSPUSHX			sys_insn(1, 0, 7, 7, 4)
+#define OP_GCSPOPCX			sys_insn(1, 0, 7, 7, 5)
+#define OP_GCSPOPX			sys_insn(1, 0, 7, 7, 6)
+#define OP_GCSPUSHM			sys_insn(1, 3, 7, 7, 0)
+
 #define OP_BRB_IALL			sys_insn(1, 1, 7, 2, 4)
 #define OP_BRB_INJ			sys_insn(1, 1, 7, 2, 5)
 #define OP_CFP_RCTX			sys_insn(1, 3, 7, 3, 4)
 #define OP_DVP_RCTX			sys_insn(1, 3, 7, 3, 5)
+#define OP_COSP_RCTX			sys_insn(1, 3, 7, 3, 6)
 #define OP_CPP_RCTX			sys_insn(1, 3, 7, 3, 7)
 
 /* Common SCTLR_ELx flags. */
@@ -826,10 +878,12 @@
 
 /* id_aa64mmfr0 */
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN	0x0
+#define ID_AA64MMFR0_EL1_TGRAN4_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN	0x0
 #define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX	0x7
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN	0x1
+#define ID_AA64MMFR0_EL1_TGRAN16_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX	0xf
 
 #define ARM64_MIN_PARANGE_BITS		32
@@ -837,6 +891,7 @@
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT	0x0
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE		0x1
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN		0x2
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2		0x3
 #define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX		0x7
 
 #ifdef CONFIG_ARM64_PA_BITS_52
@@ -847,11 +902,13 @@
 
 #if defined(CONFIG_ARM64_4K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN4_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT
 #elif defined(CONFIG_ARM64_16K_PAGES)
 #define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_LPA2		ID_AA64MMFR0_EL1_TGRAN16_52_BIT
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN
 #define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX
 #define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT
@@ -994,6 +1051,19 @@
 
 #define PIRx_ELx_PERM(idx, perm)	((perm) << ((idx) * 4))
 
+/*
+ * Permission Overlay Extension (POE) permission encodings.
+ */
+#define POE_NONE	UL(0x0)
+#define POE_R		UL(0x1)
+#define POE_X		UL(0x2)
+#define POE_RX		UL(0x3)
+#define POE_W		UL(0x4)
+#define POE_RW		UL(0x5)
+#define POE_XW		UL(0x6)
+#define POE_RXW		UL(0x7)
+#define POE_MASK	UL(0xf)
+
 #define ARM64_FEATURE_FIELD_BITS	4
 
 /* Defined for compatibility only, do not add new users. */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 553d1bc55..e72a3bf9e 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -80,6 +80,7 @@ void arch_setup_new_exec(void);
 #define TIF_TAGGED_ADDR		26	/* Allow tagged user addresses */
 #define TIF_SME			27	/* SME in use */
 #define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
+#define TIF_KERNEL_FPSTATE	29	/* Task is in a kernel mode FPSIMD section */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
index 2c29239d0..0150deb33 100644
--- a/arch/arm64/include/asm/tlb.h
+++ b/arch/arm64/include/asm/tlb.h
@@ -22,15 +22,15 @@ static void tlb_flush(struct mmu_gather *tlb);
 #include <asm-generic/tlb.h>
 
 /*
- * get the tlbi levels in arm64.  Default value is 0 if more than one
- * of cleared_* is set or neither is set.
- * Arm64 doesn't support p4ds now.
+ * get the tlbi levels in arm64.  Default value is TLBI_TTL_UNKNOWN if more than
+ * one of cleared_* is set or neither is set - this elides the level hinting to
+ * the hardware.
  */
 static inline int tlb_get_level(struct mmu_gather *tlb)
 {
 	/* The TTL field is only valid for the leaf entry. */
 	if (tlb->freed_tables)
-		return 0;
+		return TLBI_TTL_UNKNOWN;
 
 	if (tlb->cleared_ptes && !(tlb->cleared_pmds ||
 				   tlb->cleared_puds ||
@@ -47,7 +47,12 @@ static inline int tlb_get_level(struct mmu_gather *tlb)
 				   tlb->cleared_p4ds))
 		return 1;
 
-	return 0;
+	if (tlb->cleared_p4ds && !(tlb->cleared_ptes ||
+				   tlb->cleared_pmds ||
+				   tlb->cleared_puds))
+		return 0;
+
+	return TLBI_TTL_UNKNOWN;
 }
 
 static inline void tlb_flush(struct mmu_gather *tlb)
@@ -96,7 +101,10 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
 static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
 				  unsigned long addr)
 {
-	tlb_remove_ptdesc(tlb, virt_to_ptdesc(pudp));
+	struct ptdesc *ptdesc = virt_to_ptdesc(pudp);
+
+	pagetable_pud_dtor(ptdesc);
+	tlb_remove_ptdesc(tlb, ptdesc);
 }
 #endif
 
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index b149cf9f9..bfeb54f3a 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -94,19 +94,22 @@ static inline unsigned long get_trans_granule(void)
  * When ARMv8.4-TTL exists, TLBI operations take an additional hint for
  * the level at which the invalidation must take place. If the level is
  * wrong, no invalidation may take place. In the case where the level
- * cannot be easily determined, a 0 value for the level parameter will
- * perform a non-hinted invalidation.
+ * cannot be easily determined, the value TLBI_TTL_UNKNOWN will perform
+ * a non-hinted invalidation. Any provided level outside the hint range
+ * will also cause fall-back to non-hinted invalidation.
  *
  * For Stage-2 invalidation, use the level values provided to that effect
  * in asm/stage2_pgtable.h.
  */
 #define TLBI_TTL_MASK		GENMASK_ULL(47, 44)
 
+#define TLBI_TTL_UNKNOWN	INT_MAX
+
 #define __tlbi_level(op, addr, level) do {				\
 	u64 arg = addr;							\
 									\
-	if (cpus_have_const_cap(ARM64_HAS_ARMv8_4_TTL) &&		\
-	    level) {							\
+	if (alternative_has_cap_unlikely(ARM64_HAS_ARMv8_4_TTL) &&	\
+	    level >= 0 && level <= 3) {					\
 		u64 ttl = level & 3;					\
 		ttl |= get_trans_granule() << 2;			\
 		arg &= ~TLBI_TTL_MASK;					\
@@ -122,28 +125,34 @@ static inline unsigned long get_trans_granule(void)
 } while (0)
 
 /*
- * This macro creates a properly formatted VA operand for the TLB RANGE.
- * The value bit assignments are:
+ * This macro creates a properly formatted VA operand for the TLB RANGE. The
+ * value bit assignments are:
  *
  * +----------+------+-------+-------+-------+----------------------+
  * |   ASID   |  TG  | SCALE |  NUM  |  TTL  |        BADDR         |
  * +-----------------+-------+-------+-------+----------------------+
  * |63      48|47  46|45   44|43   39|38   37|36                   0|
  *
- * The address range is determined by below formula:
- * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
+ * The address range is determined by below formula: [BADDR, BADDR + (NUM + 1) *
+ * 2^(5*SCALE + 1) * PAGESIZE)
+ *
+ * Note that the first argument, baddr, is pre-shifted; If LPA2 is in use, BADDR
+ * holds addr[52:16]. Else BADDR holds page number. See for example ARM DDI
+ * 0487J.a section C5.5.60 "TLBI VAE1IS, TLBI VAE1ISNXS, TLB Invalidate by VA,
+ * EL1, Inner Shareable".
  *
  */
-#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl)		\
-	({							\
-		unsigned long __ta = (addr) >> PAGE_SHIFT;	\
-		__ta &= GENMASK_ULL(36, 0);			\
-		__ta |= (unsigned long)(ttl) << 37;		\
-		__ta |= (unsigned long)(num) << 39;		\
-		__ta |= (unsigned long)(scale) << 44;		\
-		__ta |= get_trans_granule() << 46;		\
-		__ta |= (unsigned long)(asid) << 48;		\
-		__ta;						\
+#define __TLBI_VADDR_RANGE(baddr, asid, scale, num, ttl)			\
+	({									\
+		unsigned long __ta = (baddr);					\
+		unsigned long __ttl = (ttl >= 1 && ttl <= 3) ? ttl : 0;		\
+		__ta &= GENMASK_ULL(36, 0);					\
+		__ta |= __ttl << 37;						\
+		__ta |= (unsigned long)(num) << 39;				\
+		__ta |= (unsigned long)(scale) << 44;				\
+		__ta |= get_trans_granule() << 46;				\
+		__ta |= (unsigned long)(asid) << 48;				\
+		__ta;								\
 	})
 
 /* These macros are used by the TLBI RANGE feature. */
@@ -152,12 +161,18 @@ static inline unsigned long get_trans_granule(void)
 #define MAX_TLBI_RANGE_PAGES		__TLBI_RANGE_PAGES(31, 3)
 
 /*
- * Generate 'num' values from -1 to 30 with -1 rejected by the
- * __flush_tlb_range() loop below.
+ * Generate 'num' values from -1 to 31 with -1 rejected by the
+ * __flush_tlb_range() loop below. Its return value is only
+ * significant for a maximum of MAX_TLBI_RANGE_PAGES pages. If
+ * 'pages' is more than that, you must iterate over the overall
+ * range.
  */
-#define TLBI_RANGE_MASK			GENMASK_ULL(4, 0)
-#define __TLBI_RANGE_NUM(pages, scale)	\
-	((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1)
+#define __TLBI_RANGE_NUM(pages, scale)					\
+	({								\
+		int __pages = min((pages),				\
+				  __TLBI_RANGE_PAGES(31, (scale)));	\
+		(__pages >> (5 * (scale) + 1)) - 1;			\
+	})
 
 /*
  *	TLB Invalidation
@@ -216,12 +231,16 @@ static inline unsigned long get_trans_granule(void)
  *		CPUs, ensuring that any walk-cache entries associated with the
  *		translation are also invalidated.
  *
- *	__flush_tlb_range(vma, start, end, stride, last_level)
+ *	__flush_tlb_range(vma, start, end, stride, last_level, tlb_level)
  *		Invalidate the virtual-address range '[start, end)' on all
  *		CPUs for the user address space corresponding to 'vma->mm'.
  *		The invalidation operations are issued at a granularity
  *		determined by 'stride' and only affect any walk-cache entries
- *		if 'last_level' is equal to false.
+ *		if 'last_level' is equal to false. tlb_level is the level at
+ *		which the invalidation must take place. If the level is wrong,
+ *		no invalidation may take place. In the case where the level
+ *		cannot be easily determined, the value TLBI_TTL_UNKNOWN will
+ *		perform a non-hinted invalidation.
  *
  *
  *	Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
@@ -284,16 +303,15 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
 
 static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
 {
-#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	/*
 	 * TLB flush deferral is not required on systems which are affected by
 	 * ARM64_WORKAROUND_REPEAT_TLBI, as __tlbi()/__tlbi_user() implementation
 	 * will have two consecutive TLBI instructions with a dsb(ish) in between
 	 * defeating the purpose (i.e save overall 'dsb ish' cost).
 	 */
-	if (unlikely(cpus_have_const_cap(ARM64_WORKAROUND_REPEAT_TLBI)))
+	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_REPEAT_TLBI))
 		return false;
-#endif
+
 	return true;
 }
 
@@ -333,7 +351,7 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
  * This is meant to avoid soft lock-ups on large TLB flushing ranges and not
  * necessarily a performance improvement.
  */
-#define MAX_TLBI_OPS	PTRS_PER_PTE
+#define MAX_DVM_OPS	PTRS_PER_PTE
 
 /*
  * __flush_tlb_range_op - Perform TLBI operation upon a range
@@ -346,34 +364,40 @@ static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
  * @tlb_level:	Translation Table level hint, if known
  * @tlbi_user:	If 'true', call an additional __tlbi_user()
  *              (typically for user ASIDs). 'flase' for IPA instructions
+ * @lpa2:	If 'true', the lpa2 scheme is used as set out below
  *
  * When the CPU does not support TLB range operations, flush the TLB
  * entries one by one at the granularity of 'stride'. If the TLB
  * range ops are supported, then:
  *
- * 1. If 'pages' is odd, flush the first page through non-range
- *    operations;
+ * 1. If FEAT_LPA2 is in use, the start address of a range operation must be
+ *    64KB aligned, so flush pages one by one until the alignment is reached
+ *    using the non-range operations. This step is skipped if LPA2 is not in
+ *    use.
  *
- * 2. For remaining pages: the minimum range granularity is decided
- *    by 'scale', so multiple range TLBI operations may be required.
- *    Start from scale = 0, flush the corresponding number of pages
- *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
- *    until no pages left.
+ * 2. The minimum range granularity is decided by 'scale', so multiple range
+ *    TLBI operations may be required. Start from scale = 3, flush the largest
+ *    possible number of pages ((num+1)*2^(5*scale+1)) that fit into the
+ *    requested range, then decrement scale and continue until one or zero pages
+ *    are left. We must start from highest scale to ensure 64KB start alignment
+ *    is maintained in the LPA2 case.
  *
- * Note that certain ranges can be represented by either num = 31 and
- * scale or num = 0 and scale + 1. The loop below favours the latter
- * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
+ * 3. If there is 1 page remaining, flush it through non-range operations. Range
+ *    operations can only span an even number of pages. We save this for last to
+ *    ensure 64KB start alignment is maintained for the LPA2 case.
  */
 #define __flush_tlb_range_op(op, start, pages, stride,			\
-				asid, tlb_level, tlbi_user)		\
+				asid, tlb_level, tlbi_user, lpa2)	\
 do {									\
 	int num = 0;							\
-	int scale = 0;							\
+	int scale = 3;							\
+	int shift = lpa2 ? 16 : PAGE_SHIFT;				\
 	unsigned long addr;						\
 									\
 	while (pages > 0) {						\
 		if (!system_supports_tlb_range() ||			\
-		    pages % 2 == 1) {					\
+		    pages == 1 ||					\
+		    (lpa2 && start != ALIGN(start, SZ_64K))) {		\
 			addr = __TLBI_VADDR(start, asid);		\
 			__tlbi_level(op, addr, tlb_level);		\
 			if (tlbi_user)					\
@@ -385,20 +409,20 @@ do {									\
 									\
 		num = __TLBI_RANGE_NUM(pages, scale);			\
 		if (num >= 0) {						\
-			addr = __TLBI_VADDR_RANGE(start, asid, scale,	\
-						  num, tlb_level);	\
+			addr = __TLBI_VADDR_RANGE(start >> shift, asid, \
+						scale, num, tlb_level);	\
 			__tlbi(r##op, addr);				\
 			if (tlbi_user)					\
 				__tlbi_user(r##op, addr);		\
 			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
 			pages -= __TLBI_RANGE_PAGES(num, scale);	\
 		}							\
-		scale++;						\
+		scale--;						\
 	}								\
 } while (0)
 
 #define __flush_s2_tlb_range_op(op, start, pages, stride, tlb_level) \
-	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false)
+	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false, kvm_lpa2_is_enabled());
 
 static inline void __flush_tlb_range(struct vm_area_struct *vma,
 				     unsigned long start, unsigned long end,
@@ -413,12 +437,12 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 
 	/*
 	 * When not uses TLB range ops, we can handle up to
-	 * (MAX_TLBI_OPS - 1) pages;
+	 * (MAX_DVM_OPS - 1) pages;
 	 * When uses TLB range ops, we can handle up to
 	 * (MAX_TLBI_RANGE_PAGES - 1) pages.
 	 */
 	if ((!system_supports_tlb_range() &&
-	     (end - start) >= (MAX_TLBI_OPS * stride)) ||
+	     (end - start) >= (MAX_DVM_OPS * stride)) ||
 	    pages >= MAX_TLBI_RANGE_PAGES) {
 		flush_tlb_mm(vma->vm_mm);
 		return;
@@ -428,9 +452,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 	asid = ASID(vma->vm_mm);
 
 	if (last_level)
-		__flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vale1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 	else
-		__flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
+		__flush_tlb_range_op(vae1is, start, pages, stride, asid,
+				     tlb_level, true, lpa2_is_enabled());
 
 	dsb(ish);
 	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end);
@@ -442,16 +468,17 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	/*
 	 * We cannot use leaf-only invalidation here, since we may be invalidating
 	 * table entries as part of collapsing hugepages or moving page tables.
-	 * Set the tlb_level to 0 because we can not get enough information here.
+	 * Set the tlb_level to TLBI_TTL_UNKNOWN because we can not get enough
+	 * information here.
 	 */
-	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, TLBI_TTL_UNKNOWN);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
 	unsigned long addr;
 
-	if ((end - start) > (MAX_TLBI_OPS * PAGE_SIZE)) {
+	if ((end - start) > (MAX_DVM_OPS * PAGE_SIZE)) {
 		flush_tlb_all();
 		return;
 	}
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index 9fab663dd..a323b109b 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -23,6 +23,7 @@ void update_freq_counters_refs(void);
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
+#define arch_scale_freq_ref topology_get_freq_ref
 
 #ifdef CONFIG_ACPI_CPPC_LIB
 #define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index d66dfb3a7..eefe766d6 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -9,10 +9,9 @@
 
 #include <linux/list.h>
 #include <asm/esr.h>
+#include <asm/ptrace.h>
 #include <asm/sections.h>
 
-struct pt_regs;
-
 #ifdef CONFIG_ARMV8_DEPRECATED
 bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn);
 #else
@@ -101,4 +100,55 @@ static inline unsigned long arm64_ras_serror_get_severity(unsigned long esr)
 
 bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr);
 void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr);
+
+static inline void arm64_mops_reset_regs(struct user_pt_regs *regs, unsigned long esr)
+{
+	bool wrong_option = esr & ESR_ELx_MOPS_ISS_WRONG_OPTION;
+	bool option_a = esr & ESR_ELx_MOPS_ISS_OPTION_A;
+	int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr);
+	int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr);
+	int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr);
+	unsigned long dst, src, size;
+
+	dst = regs->regs[dstreg];
+	src = regs->regs[srcreg];
+	size = regs->regs[sizereg];
+
+	/*
+	 * Put the registers back in the original format suitable for a
+	 * prologue instruction, using the generic return routine from the
+	 * Arm ARM (DDI 0487I.a) rules CNTMJ and MWFQH.
+	 */
+	if (esr & ESR_ELx_MOPS_ISS_MEM_INST) {
+		/* SET* instruction */
+		if (option_a ^ wrong_option) {
+			/* Format is from Option A; forward set */
+			regs->regs[dstreg] = dst + size;
+			regs->regs[sizereg] = -size;
+		}
+	} else {
+		/* CPY* instruction */
+		if (!(option_a ^ wrong_option)) {
+			/* Format is from Option B */
+			if (regs->pstate & PSR_N_BIT) {
+				/* Backward copy */
+				regs->regs[dstreg] = dst - size;
+				regs->regs[srcreg] = src - size;
+			}
+		} else {
+			/* Format is from Option A */
+			if (size & BIT(63)) {
+				/* Forward copy */
+				regs->regs[dstreg] = dst + size;
+				regs->regs[srcreg] = src + size;
+				regs->regs[sizereg] = -size;
+			}
+		}
+	}
+
+	if (esr & ESR_ELx_MOPS_ISS_FROM_EPILOGUE)
+		regs->pc -= 8;
+	else
+		regs->pc -= 4;
+}
 #endif
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index bd77253b6..491b2b9bd 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -39,7 +39,7 @@
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
 #define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
 
-#define __NR_compat_syscalls		453
+#define __NR_compat_syscalls		462
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 78b68311e..7118282d1 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -508,8 +508,8 @@ __SYSCALL(__NR_io_submit, compat_sys_io_submit)
 __SYSCALL(__NR_io_cancel, sys_io_cancel)
 #define __NR_exit_group 248
 __SYSCALL(__NR_exit_group, sys_exit_group)
-#define __NR_lookup_dcookie 249
-__SYSCALL(__NR_lookup_dcookie, compat_sys_lookup_dcookie)
+			/* 249 was lookup_dcookie */
+__SYSCALL(249, sys_ni_syscall)
 #define __NR_epoll_create 250
 __SYSCALL(__NR_epoll_create, sys_epoll_create)
 #define __NR_epoll_ctl 251
@@ -911,6 +911,24 @@ __SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
 __SYSCALL(__NR_cachestat, sys_cachestat)
 #define __NR_fchmodat2 452
 __SYSCALL(__NR_fchmodat2, sys_fchmodat2)
+#define __NR_map_shadow_stack 453
+__SYSCALL(__NR_map_shadow_stack, sys_map_shadow_stack)
+#define __NR_futex_wake 454
+__SYSCALL(__NR_futex_wake, sys_futex_wake)
+#define __NR_futex_wait 455
+__SYSCALL(__NR_futex_wait, sys_futex_wait)
+#define __NR_futex_requeue 456
+__SYSCALL(__NR_futex_requeue, sys_futex_requeue)
+#define __NR_statmount 457
+__SYSCALL(__NR_statmount, sys_statmount)
+#define __NR_listmount 458
+__SYSCALL(__NR_listmount, sys_listmount)
+#define __NR_lsm_get_self_attr 459
+__SYSCALL(__NR_lsm_get_self_attr, sys_lsm_get_self_attr)
+#define __NR_lsm_set_self_attr 460
+__SYSCALL(__NR_lsm_set_self_attr, sys_lsm_set_self_attr)
+#define __NR_lsm_list_modules 461
+__SYSCALL(__NR_lsm_list_modules, sys_lsm_list_modules)
 
 /*
  * Please add new compat syscalls above this comment and update
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
index b4ae32109..4305995c8 100644
--- a/arch/arm64/include/asm/vdso.h
+++ b/arch/arm64/include/asm/vdso.h
@@ -17,9 +17,6 @@
 #ifndef __ASSEMBLY__
 
 #include <generated/vdso-offsets.h>
-#ifdef CONFIG_COMPAT_VDSO
-#include <generated/vdso32-offsets.h>
-#endif
 
 #define VDSO_SYMBOL(base, name)						   \
 ({									   \
diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h
index bc9a2145f..b815d8f2c 100644
--- a/arch/arm64/include/asm/vectors.h
+++ b/arch/arm64/include/asm/vectors.h
@@ -62,7 +62,7 @@ DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
 static inline const char *
 arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
 {
-	if (arm64_kernel_unmapped_at_el0())
+	if (cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0))
 		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
 
 	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h
new file mode 100644
index 000000000..df2c47c55
--- /dev/null
+++ b/arch/arm64/include/asm/vncr_mapping.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * System register offsets in the VNCR page
+ * All offsets are *byte* displacements!
+ */
+
+#ifndef __ARM64_VNCR_MAPPING_H__
+#define __ARM64_VNCR_MAPPING_H__
+
+#define VNCR_VTTBR_EL2          0x020
+#define VNCR_VTCR_EL2           0x040
+#define VNCR_VMPIDR_EL2         0x050
+#define VNCR_CNTVOFF_EL2        0x060
+#define VNCR_HCR_EL2            0x078
+#define VNCR_HSTR_EL2           0x080
+#define VNCR_VPIDR_EL2          0x088
+#define VNCR_TPIDR_EL2          0x090
+#define VNCR_HCRX_EL2           0x0A0
+#define VNCR_VNCR_EL2           0x0B0
+#define VNCR_CPACR_EL1          0x100
+#define VNCR_CONTEXTIDR_EL1     0x108
+#define VNCR_SCTLR_EL1          0x110
+#define VNCR_ACTLR_EL1          0x118
+#define VNCR_TCR_EL1            0x120
+#define VNCR_AFSR0_EL1          0x128
+#define VNCR_AFSR1_EL1          0x130
+#define VNCR_ESR_EL1            0x138
+#define VNCR_MAIR_EL1           0x140
+#define VNCR_AMAIR_EL1          0x148
+#define VNCR_MDSCR_EL1          0x158
+#define VNCR_SPSR_EL1           0x160
+#define VNCR_CNTV_CVAL_EL0      0x168
+#define VNCR_CNTV_CTL_EL0       0x170
+#define VNCR_CNTP_CVAL_EL0      0x178
+#define VNCR_CNTP_CTL_EL0       0x180
+#define VNCR_SCXTNUM_EL1        0x188
+#define VNCR_TFSR_EL1		0x190
+#define VNCR_HFGRTR_EL2		0x1B8
+#define VNCR_HFGWTR_EL2		0x1C0
+#define VNCR_HFGITR_EL2		0x1C8
+#define VNCR_HDFGRTR_EL2	0x1D0
+#define VNCR_HDFGWTR_EL2	0x1D8
+#define VNCR_ZCR_EL1            0x1E0
+#define VNCR_HAFGRTR_EL2	0x1E8
+#define VNCR_TTBR0_EL1          0x200
+#define VNCR_TTBR1_EL1          0x210
+#define VNCR_FAR_EL1            0x220
+#define VNCR_ELR_EL1            0x230
+#define VNCR_SP_EL1             0x240
+#define VNCR_VBAR_EL1           0x250
+#define VNCR_TCR2_EL1		0x270
+#define VNCR_PIRE0_EL1		0x290
+#define VNCR_PIRE0_EL2		0x298
+#define VNCR_PIR_EL1		0x2A0
+#define VNCR_ICH_LR0_EL2        0x400
+#define VNCR_ICH_LR1_EL2        0x408
+#define VNCR_ICH_LR2_EL2        0x410
+#define VNCR_ICH_LR3_EL2        0x418
+#define VNCR_ICH_LR4_EL2        0x420
+#define VNCR_ICH_LR5_EL2        0x428
+#define VNCR_ICH_LR6_EL2        0x430
+#define VNCR_ICH_LR7_EL2        0x438
+#define VNCR_ICH_LR8_EL2        0x440
+#define VNCR_ICH_LR9_EL2        0x448
+#define VNCR_ICH_LR10_EL2       0x450
+#define VNCR_ICH_LR11_EL2       0x458
+#define VNCR_ICH_LR12_EL2       0x460
+#define VNCR_ICH_LR13_EL2       0x468
+#define VNCR_ICH_LR14_EL2       0x470
+#define VNCR_ICH_LR15_EL2       0x478
+#define VNCR_ICH_AP0R0_EL2      0x480
+#define VNCR_ICH_AP0R1_EL2      0x488
+#define VNCR_ICH_AP0R2_EL2      0x490
+#define VNCR_ICH_AP0R3_EL2      0x498
+#define VNCR_ICH_AP1R0_EL2      0x4A0
+#define VNCR_ICH_AP1R1_EL2      0x4A8
+#define VNCR_ICH_AP1R2_EL2      0x4B0
+#define VNCR_ICH_AP1R3_EL2      0x4B8
+#define VNCR_ICH_HCR_EL2        0x4C0
+#define VNCR_ICH_VMCR_EL2       0x4C8
+#define VNCR_VDISR_EL2          0x500
+#define VNCR_PMBLIMITR_EL1      0x800
+#define VNCR_PMBPTR_EL1         0x810
+#define VNCR_PMBSR_EL1          0x820
+#define VNCR_PMSCR_EL1          0x828
+#define VNCR_PMSEVFR_EL1        0x830
+#define VNCR_PMSICR_EL1         0x838
+#define VNCR_PMSIRR_EL1         0x840
+#define VNCR_PMSLATFR_EL1       0x848
+#define VNCR_TRFCR_EL1          0x880
+#define VNCR_MPAM1_EL1          0x900
+#define VNCR_MPAMHCR_EL2        0x930
+#define VNCR_MPAMVPMV_EL2       0x938
+#define VNCR_MPAMVPM0_EL2       0x940
+#define VNCR_MPAMVPM1_EL2       0x948
+#define VNCR_MPAMVPM2_EL2       0x950
+#define VNCR_MPAMVPM3_EL2       0x958
+#define VNCR_MPAMVPM4_EL2       0x960
+#define VNCR_MPAMVPM5_EL2       0x968
+#define VNCR_MPAMVPM6_EL2       0x970
+#define VNCR_MPAMVPM7_EL2       0x978
+
+#endif /* __ARM64_VNCR_MAPPING_H__ */
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 53026f45a..5023599fa 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -104,5 +104,8 @@
 #define HWCAP2_SME_F16F16	(1UL << 42)
 #define HWCAP2_MOPS		(1UL << 43)
 #define HWCAP2_HBC		(1UL << 44)
+#define HWCAP2_SVE_B16B16	(1UL << 45)
+#define HWCAP2_LRCPC3		(1UL << 46)
+#define HWCAP2_LSE128		(1UL << 47)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index f7ddd73a8..89d2fc872 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -505,6 +505,38 @@ struct kvm_smccc_filter {
 #define KVM_HYPERCALL_EXIT_SMC		(1U << 0)
 #define KVM_HYPERCALL_EXIT_16BIT	(1U << 1)
 
+/*
+ * Get feature ID registers userspace writable mask.
+ *
+ * From DDI0487J.a, D19.2.66 ("ID_AA64MMFR2_EL1, AArch64 Memory Model
+ * Feature Register 2"):
+ *
+ * "The Feature ID space is defined as the System register space in
+ * AArch64 with op0==3, op1=={0, 1, 3}, CRn==0, CRm=={0-7},
+ * op2=={0-7}."
+ *
+ * This covers all currently known R/O registers that indicate
+ * anything useful feature wise, including the ID registers.
+ *
+ * If we ever need to introduce a new range, it will be described as
+ * such in the range field.
+ */
+#define KVM_ARM_FEATURE_ID_RANGE_IDX(op0, op1, crn, crm, op2)		\
+	({								\
+		__u64 __op1 = (op1) & 3;				\
+		__op1 -= (__op1 == 3);					\
+		(__op1 << 6 | ((crm) & 7) << 3 | (op2));		\
+	})
+
+#define KVM_ARM_FEATURE_ID_RANGE	0
+#define KVM_ARM_FEATURE_ID_RANGE_SIZE	(3 * 8 * 8)
+
+struct reg_mask_range {
+	__u64 addr;		/* Pointer to mask array */
+	__u32 range;		/* Requested range */
+	__u32 reserved[13];
+};
+
 #endif
 
 #endif /* __ARM_KVM_H__ */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index d95b3d6b4..467cb7117 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -73,7 +73,13 @@ obj-$(CONFIG_ARM64_MTE)			+= mte.o
 obj-y					+= vdso-wrap.o
 obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
 obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.o
+
+# We need to prevent the SCS patching code from patching itself. Using
+# -mbranch-protection=none here to avoid the patchable PAC opcodes from being
+# generated triggers an issue with full LTO on Clang, which stops emitting PAC
+# instructions altogether. So disable LTO as well for the compilation unit.
 CFLAGS_patch-scs.o			+= -mbranch-protection=none
+CFLAGS_REMOVE_patch-scs.o		+= $(CC_FLAGS_LTO)
 
 # Force dependency (vdso*-wrap.S includes vdso.so through incbin)
 $(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c
index b1990e38a..e1be29e60 100644
--- a/arch/arm64/kernel/acpi_parking_protocol.c
+++ b/arch/arm64/kernel/acpi_parking_protocol.c
@@ -103,7 +103,7 @@ static int acpi_parking_protocol_cpu_boot(unsigned int cpu)
 		       &mailbox->entry_point);
 	writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id);
 
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	arch_send_wakeup_ipi(cpu);
 
 	return 0;
 }
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index e459cfd33..dd6ce86d4 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -52,10 +52,8 @@ struct insn_emulation {
 	int min;
 	int max;
 
-	/*
-	 * sysctl for this emulation + a sentinal entry.
-	 */
-	struct ctl_table sysctl[2];
+	/* sysctl for this emulation */
+	struct ctl_table sysctl;
 };
 
 #define ARM_OPCODE_CONDTEST_FAIL   0
@@ -558,7 +556,7 @@ static void __init register_insn_emulation(struct insn_emulation *insn)
 	update_insn_emulation_mode(insn, INSN_UNDEF);
 
 	if (insn->status != INSN_UNAVAILABLE) {
-		sysctl = &insn->sysctl[0];
+		sysctl = &insn->sysctl;
 
 		sysctl->mode = 0644;
 		sysctl->maxlen = sizeof(int);
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 5ff1942b0..5a7dbbe0c 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -117,8 +117,6 @@ int main(void)
   DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
   BLANK();
   DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET);
-  DEFINE(SOFTIRQ_SHIFT, SOFTIRQ_SHIFT);
-  DEFINE(IRQ_CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
   BLANK();
   DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
   BLANK();
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 87787a012..76b8dd370 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -121,22 +121,6 @@ cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused)
 	sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0);
 }
 
-static DEFINE_RAW_SPINLOCK(reg_user_mask_modification);
-static void __maybe_unused
-cpu_clear_bf16_from_user_emulation(const struct arm64_cpu_capabilities *__unused)
-{
-	struct arm64_ftr_reg *regp;
-
-	regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1);
-	if (!regp)
-		return;
-
-	raw_spin_lock(&reg_user_mask_modification);
-	if (regp->user_mask & ID_AA64ISAR1_EL1_BF16_MASK)
-		regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK;
-	raw_spin_unlock(&reg_user_mask_modification);
-}
-
 #define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max)	\
 	.matches = is_affected_midr_range,			\
 	.midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max)
@@ -390,6 +374,7 @@ static const struct midr_range erratum_1463225[] = {
 static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2139208
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2119858
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -403,6 +388,7 @@ static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
 static const struct midr_range tsb_flush_fail_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2067961
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2054223
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -415,6 +401,7 @@ static const struct midr_range tsb_flush_fail_cpus[] = {
 static struct midr_range trbe_write_out_of_range_cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_2253138
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+	MIDR_ALL_VERSIONS(MIDR_MICROSOFT_AZURE_COBALT_100),
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_2224489
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
@@ -740,7 +727,6 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		/* Cortex-A510 r0p0 - r1p1 */
 		ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1),
 		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
-		.cpu_enable = cpu_clear_bf16_from_user_emulation,
 	},
 #endif
 #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 444a73c2e..8d1a634a4 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -279,6 +279,8 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_B16B16_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, 0),
@@ -611,18 +613,6 @@ static const struct arm64_ftr_bits ftr_id_dfr1[] = {
 	ARM64_FTR_END,
 };
 
-static const struct arm64_ftr_bits ftr_zcr[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
-		ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_WIDTH, 0),	/* LEN */
-	ARM64_FTR_END,
-};
-
-static const struct arm64_ftr_bits ftr_smcr[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
-		SMCR_ELx_LEN_SHIFT, SMCR_ELx_LEN_WIDTH, 0),	/* LEN */
-	ARM64_FTR_END,
-};
-
 /*
  * Common ftr bits for a 32bit register with all hidden, strict
  * attributes, with 4bit feature fields and a default safe value of
@@ -735,10 +725,6 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
 	ARM64_FTR_REG(SYS_ID_AA64MMFR3_EL1, ftr_id_aa64mmfr3),
 
-	/* Op1 = 0, CRn = 1, CRm = 2 */
-	ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr),
-	ARM64_FTR_REG(SYS_SMCR_EL1, ftr_smcr),
-
 	/* Op1 = 1, CRn = 0, CRm = 0 */
 	ARM64_FTR_REG(SYS_GMID_EL1, ftr_gmid),
 
@@ -1013,6 +999,37 @@ static void init_32bit_cpu_features(struct cpuinfo_32bit *info)
 	init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
 }
 
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+static bool enable_pseudo_nmi;
+
+static int __init early_enable_pseudo_nmi(char *p)
+{
+	return kstrtobool(p, &enable_pseudo_nmi);
+}
+early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi);
+
+static __init void detect_system_supports_pseudo_nmi(void)
+{
+	struct device_node *np;
+
+	if (!enable_pseudo_nmi)
+		return;
+
+	/*
+	 * Detect broken MediaTek firmware that doesn't properly save and
+	 * restore GIC priorities.
+	 */
+	np = of_find_compatible_node(NULL, NULL, "arm,gic-v3");
+	if (np && of_property_read_bool(np, "mediatek,broken-save-restore-fw")) {
+		pr_info("Pseudo-NMI disabled due to MediaTek Chromebook GICR save problem\n");
+		enable_pseudo_nmi = false;
+	}
+	of_node_put(np);
+}
+#else /* CONFIG_ARM64_PSEUDO_NMI */
+static inline void detect_system_supports_pseudo_nmi(void) { }
+#endif
+
 void __init init_cpu_features(struct cpuinfo_arm64 *info)
 {
 	/* Before we start using the tables, make sure it is sorted */
@@ -1040,38 +1057,30 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 
 	if (IS_ENABLED(CONFIG_ARM64_SVE) &&
 	    id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
-		info->reg_zcr = read_zcr_features();
-		init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
+		unsigned long cpacr = cpacr_save_enable_kernel_sve();
+
 		vec_init_vq_map(ARM64_VEC_SVE);
+
+		cpacr_restore(cpacr);
 	}
 
 	if (IS_ENABLED(CONFIG_ARM64_SME) &&
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
-		info->reg_smcr = read_smcr_features();
+		unsigned long cpacr = cpacr_save_enable_kernel_sme();
+
 		/*
 		 * We mask out SMPS since even if the hardware
 		 * supports priorities the kernel does not at present
 		 * and we block access to them.
 		 */
 		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
-		init_cpu_ftr_reg(SYS_SMCR_EL1, info->reg_smcr);
 		vec_init_vq_map(ARM64_VEC_SME);
+
+		cpacr_restore(cpacr);
 	}
 
 	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
 		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
-
-	/*
-	 * Initialize the indirect array of CPU capabilities pointers before we
-	 * handle the boot CPU below.
-	 */
-	init_cpucap_indirect_list();
-
-	/*
-	 * Detect and enable early CPU capabilities based on the boot CPU,
-	 * after we have initialised the CPU feature infrastructure.
-	 */
-	setup_boot_cpu_capabilities();
 }
 
 static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
@@ -1289,32 +1298,34 @@ void update_cpu_features(int cpu,
 	taint |= check_update_ftr_reg(SYS_ID_AA64SMFR0_EL1, cpu,
 				      info->reg_id_aa64smfr0, boot->reg_id_aa64smfr0);
 
+	/* Probe vector lengths */
 	if (IS_ENABLED(CONFIG_ARM64_SVE) &&
 	    id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
-		info->reg_zcr = read_zcr_features();
-		taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
-					info->reg_zcr, boot->reg_zcr);
+		if (!system_capabilities_finalized()) {
+			unsigned long cpacr = cpacr_save_enable_kernel_sve();
 
-		/* Probe vector lengths */
-		if (!system_capabilities_finalized())
 			vec_update_vq_map(ARM64_VEC_SVE);
+
+			cpacr_restore(cpacr);
+		}
 	}
 
 	if (IS_ENABLED(CONFIG_ARM64_SME) &&
 	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
-		info->reg_smcr = read_smcr_features();
+		unsigned long cpacr = cpacr_save_enable_kernel_sme();
+
 		/*
 		 * We mask out SMPS since even if the hardware
 		 * supports priorities the kernel does not at present
 		 * and we block access to them.
 		 */
 		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
-		taint |= check_update_ftr_reg(SYS_SMCR_EL1, cpu,
-					info->reg_smcr, boot->reg_smcr);
 
 		/* Probe vector lengths */
 		if (!system_capabilities_finalized())
 			vec_update_vq_map(ARM64_VEC_SME);
+
+		cpacr_restore(cpacr);
 	}
 
 	/*
@@ -1554,24 +1565,6 @@ static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry,
 	return has_sre;
 }
 
-static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int __unused)
-{
-	u32 midr = read_cpuid_id();
-
-	/* Cavium ThunderX pass 1.x and 2.x */
-	return midr_is_cpu_model_range(midr, MIDR_THUNDERX,
-		MIDR_CPU_VAR_REV(0, 0),
-		MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK));
-}
-
-static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unused)
-{
-	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
-
-	return cpuid_feature_extract_signed_field(pfr0,
-					ID_AA64PFR0_EL1_FP_SHIFT) < 0;
-}
-
 static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
 			  int scope)
 {
@@ -1621,7 +1614,7 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope)
 	if (is_kdump_kernel())
 		return false;
 
-	if (cpus_have_const_cap(ARM64_WORKAROUND_NVIDIA_CARMEL_CNP))
+	if (cpus_have_cap(ARM64_WORKAROUND_NVIDIA_CARMEL_CNP))
 		return false;
 
 	return has_cpuid_feature(entry, scope);
@@ -1746,6 +1739,39 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 	return !meltdown_safe;
 }
 
+#if defined(ID_AA64MMFR0_EL1_TGRAN_LPA2) && defined(ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2)
+static bool has_lpa2_at_stage1(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_LPA2;
+}
+
+static bool has_lpa2_at_stage2(u64 mmfr0)
+{
+	unsigned int tgran;
+
+	tgran = cpuid_feature_extract_unsigned_field(mmfr0,
+					ID_AA64MMFR0_EL1_TGRAN_2_SHIFT);
+	return tgran == ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_LPA2;
+}
+
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u64 mmfr0;
+
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	return has_lpa2_at_stage1(mmfr0) && has_lpa2_at_stage2(mmfr0);
+}
+#else
+static bool has_lpa2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	return false;
+}
+#endif
+
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 #define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
 
@@ -1754,16 +1780,15 @@ void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
 			     phys_addr_t size, pgprot_t prot,
 			     phys_addr_t (*pgtable_alloc)(int), int flags);
 
-static phys_addr_t kpti_ng_temp_alloc;
+static phys_addr_t __initdata kpti_ng_temp_alloc;
 
-static phys_addr_t kpti_ng_pgd_alloc(int shift)
+static phys_addr_t __init kpti_ng_pgd_alloc(int shift)
 {
 	kpti_ng_temp_alloc -= PAGE_SIZE;
 	return kpti_ng_temp_alloc;
 }
 
-static void
-kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
+static int __init __kpti_install_ng_mappings(void *__unused)
 {
 	typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long);
 	extern kpti_remap_fn idmap_kpti_install_ng_mappings;
@@ -1776,20 +1801,6 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
 	pgd_t *kpti_ng_temp_pgd;
 	u64 alloc = 0;
 
-	if (__this_cpu_read(this_cpu_vector) == vectors) {
-		const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
-
-		__this_cpu_write(this_cpu_vector, v);
-	}
-
-	/*
-	 * We don't need to rewrite the page-tables if either we've done
-	 * it already or we have KASLR enabled and therefore have not
-	 * created any global mappings at all.
-	 */
-	if (arm64_use_ng_mappings)
-		return;
-
 	remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings);
 
 	if (!cpu) {
@@ -1826,14 +1837,43 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
 		free_pages(alloc, order);
 		arm64_use_ng_mappings = true;
 	}
+
+	return 0;
+}
+
+static void __init kpti_install_ng_mappings(void)
+{
+	/* Check whether KPTI is going to be used */
+	if (!arm64_kernel_unmapped_at_el0())
+		return;
+
+	/*
+	 * We don't need to rewrite the page-tables if either we've done
+	 * it already or we have KASLR enabled and therefore have not
+	 * created any global mappings at all.
+	 */
+	if (arm64_use_ng_mappings)
+		return;
+
+	stop_machine(__kpti_install_ng_mappings, NULL, cpu_online_mask);
 }
+
 #else
-static void
-kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
+static inline void kpti_install_ng_mappings(void)
 {
 }
 #endif	/* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
+static void cpu_enable_kpti(struct arm64_cpu_capabilities const *cap)
+{
+	if (__this_cpu_read(this_cpu_vector) == vectors) {
+		const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
+
+		__this_cpu_write(this_cpu_vector, v);
+	}
+
+}
+
 static int __init parse_kpti(char *str)
 {
 	bool enabled;
@@ -1848,6 +1888,8 @@ static int __init parse_kpti(char *str)
 early_param("kpti", parse_kpti);
 
 #ifdef CONFIG_ARM64_HW_AFDBM
+static struct cpumask dbm_cpus __read_mostly;
+
 static inline void __cpu_enable_hw_dbm(void)
 {
 	u64 tcr = read_sysreg(tcr_el1) | TCR_HD;
@@ -1883,35 +1925,22 @@ static bool cpu_can_use_dbm(const struct arm64_cpu_capabilities *cap)
 
 static void cpu_enable_hw_dbm(struct arm64_cpu_capabilities const *cap)
 {
-	if (cpu_can_use_dbm(cap))
+	if (cpu_can_use_dbm(cap)) {
 		__cpu_enable_hw_dbm();
+		cpumask_set_cpu(smp_processor_id(), &dbm_cpus);
+	}
 }
 
 static bool has_hw_dbm(const struct arm64_cpu_capabilities *cap,
 		       int __unused)
 {
-	static bool detected = false;
 	/*
 	 * DBM is a non-conflicting feature. i.e, the kernel can safely
 	 * run a mix of CPUs with and without the feature. So, we
 	 * unconditionally enable the capability to allow any late CPU
 	 * to use the feature. We only enable the control bits on the
-	 * CPU, if it actually supports.
-	 *
-	 * We have to make sure we print the "feature" detection only
-	 * when at least one CPU actually uses it. So check if this CPU
-	 * can actually use it and print the message exactly once.
-	 *
-	 * This is safe as all CPUs (including secondary CPUs - due to the
-	 * LOCAL_CPU scope - and the hotplugged CPUs - via verification)
-	 * goes through the "matches" check exactly once. Also if a CPU
-	 * matches the criteria, it is guaranteed that the CPU will turn
-	 * the DBM on, as the capability is unconditionally enabled.
+	 * CPU, if it is supported.
 	 */
-	if (!detected && cpu_can_use_dbm(cap)) {
-		detected = true;
-		pr_info("detected: Hardware dirty bit management\n");
-	}
 
 	return true;
 }
@@ -1944,8 +1973,6 @@ int get_cpu_with_amu_feat(void)
 static void cpu_amu_enable(struct arm64_cpu_capabilities const *cap)
 {
 	if (has_cpuid_feature(cap, SCOPE_LOCAL_CPU)) {
-		pr_info("detected CPU%d: Activity Monitors Unit (AMU)\n",
-			smp_processor_id());
 		cpumask_set_cpu(smp_processor_id(), &amu_cpus);
 
 		/* 0 reference values signal broken/disabled counters */
@@ -2104,14 +2131,6 @@ static void cpu_enable_e0pd(struct arm64_cpu_capabilities const *cap)
 #endif /* CONFIG_ARM64_E0PD */
 
 #ifdef CONFIG_ARM64_PSEUDO_NMI
-static bool enable_pseudo_nmi;
-
-static int __init early_enable_pseudo_nmi(char *p)
-{
-	return kstrtobool(p, &enable_pseudo_nmi);
-}
-early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi);
-
 static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry,
 				   int scope)
 {
@@ -2190,12 +2209,23 @@ static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
 }
 #endif /* CONFIG_ARM64_MTE */
 
+static void user_feature_fixup(void)
+{
+	if (cpus_have_cap(ARM64_WORKAROUND_2658417)) {
+		struct arm64_ftr_reg *regp;
+
+		regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1);
+		if (regp)
+			regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK;
+	}
+}
+
 static void elf_hwcap_fixup(void)
 {
-#ifdef CONFIG_ARM64_ERRATUM_1742098
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1742098))
+#ifdef CONFIG_COMPAT
+	if (cpus_have_cap(ARM64_WORKAROUND_1742098))
 		compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES;
-#endif /* ARM64_ERRATUM_1742098 */
+#endif /* CONFIG_COMPAT */
 }
 
 #ifdef CONFIG_KVM
@@ -2300,12 +2330,6 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 	},
 #endif /* CONFIG_ARM64_LSE_ATOMICS */
 	{
-		.desc = "Software prefetching using PRFM",
-		.capability = ARM64_HAS_NO_HW_PREFETCH,
-		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
-		.matches = has_no_hw_prefetch,
-	},
-	{
 		.desc = "Virtualization Host Extensions",
 		.capability = ARM64_HAS_VIRT_HOST_EXTN,
 		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
@@ -2317,7 +2341,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.capability = ARM64_HAS_NESTED_VIRT,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.matches = has_nested_virt_support,
-		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP)
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, NV2)
 	},
 	{
 		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
@@ -2351,7 +2375,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Kernel page table isolation (KPTI)",
 		.capability = ARM64_UNMAP_KERNEL_AT_EL0,
 		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
-		.cpu_enable = kpti_install_ng_mappings,
+		.cpu_enable = cpu_enable_kpti,
 		.matches = unmap_kernel_at_el0,
 		/*
 		 * The ID feature fields below are used to indicate that
@@ -2361,11 +2385,11 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, CSV3, IMP)
 	},
 	{
-		/* FP/SIMD is not implemented */
-		.capability = ARM64_HAS_NO_FPSIMD,
-		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
-		.min_field_value = 0,
-		.matches = has_no_fpsimd,
+		.capability = ARM64_HAS_FPSIMD,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_fpsimd,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, FP, IMP)
 	},
 #ifdef CONFIG_ARM64_PMEM
 	{
@@ -2388,7 +2412,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.desc = "Scalable Vector Extension",
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SVE,
-		.cpu_enable = sve_kernel_enable,
+		.cpu_enable = cpu_enable_sve,
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, SVE, IMP)
 	},
@@ -2405,16 +2429,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 #endif /* CONFIG_ARM64_RAS_EXTN */
 #ifdef CONFIG_ARM64_AMU_EXTN
 	{
-		/*
-		 * The feature is enabled by default if CONFIG_ARM64_AMU_EXTN=y.
-		 * Therefore, don't provide .desc as we don't want the detection
-		 * message to be shown until at least one CPU is detected to
-		 * support the feature.
-		 */
+		.desc = "Activity Monitors Unit (AMU)",
 		.capability = ARM64_HAS_AMU_EXTN,
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		.matches = has_amu,
 		.cpu_enable = cpu_amu_enable,
+		.cpus = &amu_cpus,
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, AMU, IMP)
 	},
 #endif /* CONFIG_ARM64_AMU_EXTN */
@@ -2454,18 +2474,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 	},
 #ifdef CONFIG_ARM64_HW_AFDBM
 	{
-		/*
-		 * Since we turn this on always, we don't want the user to
-		 * think that the feature is available when it may not be.
-		 * So hide the description.
-		 *
-		 * .desc = "Hardware pagetable Dirty Bit Management",
-		 *
-		 */
+		.desc = "Hardware dirty bit management",
 		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
 		.capability = ARM64_HW_DBM,
 		.matches = has_hw_dbm,
 		.cpu_enable = cpu_enable_hw_dbm,
+		.cpus = &dbm_cpus,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HAFDBS, DBM)
 	},
 #endif
@@ -2641,7 +2655,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME,
 		.matches = has_cpuid_feature,
-		.cpu_enable = sme_kernel_enable,
+		.cpu_enable = cpu_enable_sme,
 		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, IMP)
 	},
 	/* FA64 should be sorted after the base SME capability */
@@ -2650,7 +2664,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME_FA64,
 		.matches = has_cpuid_feature,
-		.cpu_enable = fa64_kernel_enable,
+		.cpu_enable = cpu_enable_fa64,
 		ARM64_CPUID_FIELDS(ID_AA64SMFR0_EL1, FA64, IMP)
 	},
 	{
@@ -2658,7 +2672,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.capability = ARM64_SME2,
 		.matches = has_cpuid_feature,
-		.cpu_enable = sme2_kernel_enable,
+		.cpu_enable = cpu_enable_sme2,
 		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, SME2)
 	},
 #endif /* CONFIG_ARM64_SME */
@@ -2719,6 +2733,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
 	},
+	{
+		.desc = "52-bit Virtual Addressing for KVM (LPA2)",
+		.capability = ARM64_HAS_LPA2,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_lpa2,
+	},
 	{},
 };
 
@@ -2787,6 +2807,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA512, CAP_HWCAP, KERNEL_HWCAP_SHA512),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, CRC32, IMP, CAP_HWCAP, KERNEL_HWCAP_CRC32),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, IMP, CAP_HWCAP, KERNEL_HWCAP_ATOMICS),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, FEAT_LSE128, CAP_HWCAP, KERNEL_HWCAP_LSE128),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, RDM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA3),
 	HWCAP_CAP(ID_AA64ISAR0_EL1, SM3, IMP, CAP_HWCAP, KERNEL_HWCAP_SM3),
@@ -2807,6 +2828,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR1_EL1, FCMA, IMP, CAP_HWCAP, KERNEL_HWCAP_FCMA),
 	HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, IMP, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
 	HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC3, CAP_HWCAP, KERNEL_HWCAP_LRCPC3),
 	HWCAP_CAP(ID_AA64ISAR1_EL1, FRINTTS, IMP, CAP_HWCAP, KERNEL_HWCAP_FRINT),
 	HWCAP_CAP(ID_AA64ISAR1_EL1, SB, IMP, CAP_HWCAP, KERNEL_HWCAP_SB),
 	HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_BF16),
@@ -2821,6 +2843,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
 	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
 	HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE_B16B16),
 	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
 	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
 	HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
@@ -2981,7 +3004,7 @@ static void update_cpu_capabilities(u16 scope_mask)
 		    !caps->matches(caps, cpucap_default_scope(caps)))
 			continue;
 
-		if (caps->desc)
+		if (caps->desc && !caps->cpus)
 			pr_info("detected: %s\n", caps->desc);
 
 		__set_bit(caps->capability, system_cpucaps);
@@ -3153,36 +3176,28 @@ static void verify_local_elf_hwcaps(void)
 
 static void verify_sve_features(void)
 {
-	u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
-	u64 zcr = read_zcr_features();
-
-	unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK;
-	unsigned int len = zcr & ZCR_ELx_LEN_MASK;
+	unsigned long cpacr = cpacr_save_enable_kernel_sve();
 
-	if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SVE)) {
+	if (vec_verify_vq_map(ARM64_VEC_SVE)) {
 		pr_crit("CPU%d: SVE: vector length support mismatch\n",
 			smp_processor_id());
 		cpu_die_early();
 	}
 
-	/* Add checks on other ZCR bits here if necessary */
+	cpacr_restore(cpacr);
 }
 
 static void verify_sme_features(void)
 {
-	u64 safe_smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1);
-	u64 smcr = read_smcr_features();
+	unsigned long cpacr = cpacr_save_enable_kernel_sme();
 
-	unsigned int safe_len = safe_smcr & SMCR_ELx_LEN_MASK;
-	unsigned int len = smcr & SMCR_ELx_LEN_MASK;
-
-	if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SME)) {
+	if (vec_verify_vq_map(ARM64_VEC_SME)) {
 		pr_crit("CPU%d: SME: vector length support mismatch\n",
 			smp_processor_id());
 		cpu_die_early();
 	}
 
-	/* Add checks on other SMCR bits here if necessary */
+	cpacr_restore(cpacr);
 }
 
 static void verify_hyp_capabilities(void)
@@ -3264,14 +3279,6 @@ void check_local_cpu_capabilities(void)
 		verify_local_cpu_capabilities();
 }
 
-static void __init setup_boot_cpu_capabilities(void)
-{
-	/* Detect capabilities with either SCOPE_BOOT_CPU or SCOPE_LOCAL_CPU */
-	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
-	/* Enable the SCOPE_BOOT_CPU capabilities alone right away */
-	enable_cpu_capabilities(SCOPE_BOOT_CPU);
-}
-
 bool this_cpu_has_cap(unsigned int n)
 {
 	if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) {
@@ -3289,7 +3296,6 @@ EXPORT_SYMBOL_GPL(this_cpu_has_cap);
  * This helper function is used in a narrow window when,
  * - The system wide safe registers are set with all the SMP CPUs and,
  * - The SYSTEM_FEATURE system_cpucaps may not have been set.
- * In all other cases cpus_have_{const_}cap() should be used.
  */
 static bool __maybe_unused __system_matches_cap(unsigned int n)
 {
@@ -3328,46 +3334,98 @@ unsigned long cpu_get_elf_hwcap2(void)
 	return elf_hwcap[1];
 }
 
-static void __init setup_system_capabilities(void)
+static void __init setup_boot_cpu_capabilities(void)
 {
 	/*
-	 * We have finalised the system-wide safe feature
-	 * registers, finalise the capabilities that depend
-	 * on it. Also enable all the available capabilities,
-	 * that are not enabled already.
+	 * The boot CPU's feature register values have been recorded. Detect
+	 * boot cpucaps and local cpucaps for the boot CPU, then enable and
+	 * patch alternatives for the available boot cpucaps.
 	 */
-	update_cpu_capabilities(SCOPE_SYSTEM);
-	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
+	enable_cpu_capabilities(SCOPE_BOOT_CPU);
+	apply_boot_alternatives();
 }
 
-void __init setup_cpu_features(void)
+void __init setup_boot_cpu_features(void)
 {
-	u32 cwg;
+	/*
+	 * Initialize the indirect array of CPU capabilities pointers before we
+	 * handle the boot CPU.
+	 */
+	init_cpucap_indirect_list();
 
-	setup_system_capabilities();
-	setup_elf_hwcaps(arm64_elf_hwcaps);
+	/*
+	 * Detect broken pseudo-NMI. Must be called _before_ the call to
+	 * setup_boot_cpu_capabilities() since it interacts with
+	 * can_use_gic_priorities().
+	 */
+	detect_system_supports_pseudo_nmi();
 
-	if (system_supports_32bit_el0()) {
-		setup_elf_hwcaps(compat_elf_hwcaps);
-		elf_hwcap_fixup();
+	setup_boot_cpu_capabilities();
+}
+
+static void __init setup_system_capabilities(void)
+{
+	/*
+	 * The system-wide safe feature register values have been finalized.
+	 * Detect, enable, and patch alternatives for the available system
+	 * cpucaps.
+	 */
+	update_cpu_capabilities(SCOPE_SYSTEM);
+	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	apply_alternatives_all();
+
+	/*
+	 * Log any cpucaps with a cpumask as these aren't logged by
+	 * update_cpu_capabilities().
+	 */
+	for (int i = 0; i < ARM64_NCAPS; i++) {
+		const struct arm64_cpu_capabilities *caps = cpucap_ptrs[i];
+
+		if (caps && caps->cpus && caps->desc &&
+			cpumask_any(caps->cpus) < nr_cpu_ids)
+			pr_info("detected: %s on CPU%*pbl\n",
+				caps->desc, cpumask_pr_args(caps->cpus));
 	}
 
+	/*
+	 * TTBR0 PAN doesn't have its own cpucap, so log it manually.
+	 */
 	if (system_uses_ttbr0_pan())
 		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+}
+
+void __init setup_system_features(void)
+{
+	setup_system_capabilities();
+
+	kpti_install_ng_mappings();
 
 	sve_setup();
 	sme_setup();
-	minsigstksz_setup();
 
 	/*
 	 * Check for sane CTR_EL0.CWG value.
 	 */
-	cwg = cache_type_cwg();
-	if (!cwg)
+	if (!cache_type_cwg())
 		pr_warn("No Cache Writeback Granule information, assuming %d\n",
 			ARCH_DMA_MINALIGN);
 }
 
+void __init setup_user_features(void)
+{
+	user_feature_fixup();
+
+	setup_elf_hwcaps(arm64_elf_hwcaps);
+
+	if (system_supports_32bit_el0()) {
+		setup_elf_hwcaps(compat_elf_hwcaps);
+		elf_hwcap_fixup();
+	}
+
+	minsigstksz_setup();
+}
+
 static int enable_mismatched_32bit_el0(unsigned int cpu)
 {
 	/*
@@ -3422,7 +3480,7 @@ subsys_initcall_sync(init_32bit_el0_mask);
 
 static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap)
 {
-	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
+	cpu_enable_swapper_cnp();
 }
 
 /*
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 98fda8500..47043c0d9 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -36,8 +36,6 @@ static struct cpuinfo_arm64 boot_cpu_data;
 static inline const char *icache_policy_str(int l1ip)
 {
 	switch (l1ip) {
-	case CTR_EL0_L1Ip_VPIPT:
-		return "VPIPT";
 	case CTR_EL0_L1Ip_VIPT:
 		return "VIPT";
 	case CTR_EL0_L1Ip_PIPT:
@@ -127,6 +125,9 @@ static const char *const hwcap_str[] = {
 	[KERNEL_HWCAP_SME_F16F16]	= "smef16f16",
 	[KERNEL_HWCAP_MOPS]		= "mops",
 	[KERNEL_HWCAP_HBC]		= "hbc",
+	[KERNEL_HWCAP_SVE_B16B16]	= "sveb16b16",
+	[KERNEL_HWCAP_LRCPC3]		= "lrcpc3",
+	[KERNEL_HWCAP_LSE128]		= "lse128",
 };
 
 #ifdef CONFIG_COMPAT
@@ -385,9 +386,6 @@ static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
 	switch (l1ip) {
 	case CTR_EL0_L1Ip_PIPT:
 		break;
-	case CTR_EL0_L1Ip_VPIPT:
-		set_bit(ICACHEF_VPIPT, &__icache_flags);
-		break;
 	case CTR_EL0_L1Ip_VIPT:
 	default:
 		/* Assume aliasing */
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index 2b478ca35..022800134 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -71,10 +71,6 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
 	return pgprot_val(PAGE_KERNEL_EXEC);
 }
 
-/* we will fill this structure from the stub, so don't put it in .bss */
-struct screen_info screen_info __section(".data");
-EXPORT_SYMBOL(screen_info);
-
 int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 {
 	pteval_t prot_val = create_mapping_protection(md);
@@ -113,8 +109,7 @@ static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 		pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
 	if (md->attribute & EFI_MEMORY_XP)
 		pte = set_pte_bit(pte, __pgprot(PTE_PXN));
-	else if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) &&
-		 system_supports_bti() && spd->has_bti)
+	else if (system_supports_bti_kernel() && spd->has_bti)
 		pte = set_pte_bit(pte, __pgprot(PTE_GP));
 	set_pte(ptep, pte);
 	return 0;
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 7fcbee0f6..7ef0e127b 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -442,24 +442,23 @@ alternative_else_nop_endif
 
 .L_skip_tramp_exit_\@:
 #endif
+	.endif
+
 	ldr	lr, [sp, #S_LR]
 	add	sp, sp, #PT_REGS_SIZE		// restore sp
 
+	.if \el == 0
 	/* This must be after the last explicit memory access */
 alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
 	tlbi	vale1, xzr
 	dsb	nsh
 alternative_else_nop_endif
-	eret
 	.else
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #PT_REGS_SIZE		// restore sp
-
 	/* Ensure any device/NC reads complete */
 	alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412
+	.endif
 
 	eret
-	.endif
 	sb
 	.endm
 
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index f9b3adebc..5e7b0eb46 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -85,13 +85,13 @@
  * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and
  * flag the register state as invalid.
  *
- * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may
- * save the task's FPSIMD context back to task_struct from softirq context.
- * To prevent this from racing with the manipulation of the task's FPSIMD state
- * from task context and thereby corrupting the state, it is necessary to
- * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE
- * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to
- * run but prevent them to use FPSIMD.
+ * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may be
+ * called from softirq context, which will save the task's FPSIMD context back
+ * to task_struct. To prevent this from racing with the manipulation of the
+ * task's FPSIMD state from task context and thereby corrupting the state, it
+ * is necessary to protect any manipulation of a task's fpsimd_state or
+ * TIF_FOREIGN_FPSTATE flag with get_cpu_fpsimd_context(), which will suspend
+ * softirq servicing entirely until put_cpu_fpsimd_context() is called.
  *
  * For a certain task, the sequence may look something like this:
  * - the task gets scheduled in; if both the task's fpsimd_cpu field
@@ -209,27 +209,14 @@ static inline void sme_free(struct task_struct *t) { }
 
 #endif
 
-DEFINE_PER_CPU(bool, fpsimd_context_busy);
-EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy);
-
 static void fpsimd_bind_task_to_cpu(void);
 
-static void __get_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, true);
-
-	WARN_ON(busy);
-}
-
 /*
  * Claim ownership of the CPU FPSIMD context for use by the calling context.
  *
  * The caller may freely manipulate the FPSIMD context metadata until
  * put_cpu_fpsimd_context() is called.
  *
- * The double-underscore version must only be called if you know the task
- * can't be preempted.
- *
  * On RT kernels local_bh_disable() is not sufficient because it only
  * serializes soft interrupt related sections via a local lock, but stays
  * preemptible. Disabling preemption is the right choice here as bottom
@@ -242,14 +229,6 @@ static void get_cpu_fpsimd_context(void)
 		local_bh_disable();
 	else
 		preempt_disable();
-	__get_cpu_fpsimd_context();
-}
-
-static void __put_cpu_fpsimd_context(void)
-{
-	bool busy = __this_cpu_xchg(fpsimd_context_busy, false);
-
-	WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */
 }
 
 /*
@@ -261,18 +240,12 @@ static void __put_cpu_fpsimd_context(void)
  */
 static void put_cpu_fpsimd_context(void)
 {
-	__put_cpu_fpsimd_context();
 	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
 		local_bh_enable();
 	else
 		preempt_enable();
 }
 
-static bool have_cpu_fpsimd_context(void)
-{
-	return !preemptible() && __this_cpu_read(fpsimd_context_busy);
-}
-
 unsigned int task_get_vl(const struct task_struct *task, enum vec_type type)
 {
 	return task->thread.vl[type];
@@ -383,7 +356,8 @@ static void task_fpsimd_load(void)
 	bool restore_ffr;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
+	WARN_ON(test_thread_flag(TIF_KERNEL_FPSTATE));
 
 	if (system_supports_sve() || system_supports_sme()) {
 		switch (current->thread.fp_type) {
@@ -406,7 +380,7 @@ static void task_fpsimd_load(void)
 		default:
 			/*
 			 * This indicates either a bug in
-			 * fpsimd_save() or memory corruption, we
+			 * fpsimd_save_user_state() or memory corruption, we
 			 * should always record an explicit format
 			 * when we save. We always at least have the
 			 * memory allocated for FPSMID registers so
@@ -457,7 +431,7 @@ static void task_fpsimd_load(void)
  * than via current, if we are saving KVM state then it will have
  * ensured that the type of registers to save is set in last->to_save.
  */
-static void fpsimd_save(void)
+static void fpsimd_save_user_state(void)
 {
 	struct cpu_fp_state const *last =
 		this_cpu_ptr(&fpsimd_last_state);
@@ -467,7 +441,7 @@ static void fpsimd_save(void)
 	unsigned int vl;
 
 	WARN_ON(!system_supports_fpsimd());
-	WARN_ON(!have_cpu_fpsimd_context());
+	WARN_ON(preemptible());
 
 	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
 		return;
@@ -589,7 +563,6 @@ static struct ctl_table sve_default_vl_table[] = {
 		.proc_handler	= vec_proc_do_default_vl,
 		.extra1		= &vl_info[ARM64_VEC_SVE],
 	},
-	{ }
 };
 
 static int __init sve_sysctl_init(void)
@@ -613,7 +586,6 @@ static struct ctl_table sme_default_vl_table[] = {
 		.proc_handler	= vec_proc_do_default_vl,
 		.extra1		= &vl_info[ARM64_VEC_SME],
 	},
-	{ }
 };
 
 static int __init sme_sysctl_init(void)
@@ -890,7 +862,7 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	if (task == current) {
 		get_cpu_fpsimd_context();
 
-		fpsimd_save();
+		fpsimd_save_user_state();
 	}
 
 	fpsimd_flush_task_state(task);
@@ -926,10 +898,8 @@ int vec_set_vector_length(struct task_struct *task, enum vec_type type,
 	 * allocate SVE now in case it is needed for use in streaming
 	 * mode.
 	 */
-	if (system_supports_sve()) {
-		sve_free(task);
-		sve_alloc(task, true);
-	}
+	sve_free(task);
+	sve_alloc(task, true);
 
 	if (free_sme)
 		sme_free(task);
@@ -1160,42 +1130,18 @@ fail:
 	panic("Cannot allocate percpu memory for EFI SVE save/restore");
 }
 
-/*
- * Enable SVE for EL1.
- * Intended for use by the cpufeatures code during CPU boot.
- */
-void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+void cpu_enable_sve(const struct arm64_cpu_capabilities *__always_unused p)
 {
 	write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1);
 	isb();
 }
 
-/*
- * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
- * vector length.
- *
- * Use only if SVE is present.
- * This function clobbers the SVE vector length.
- */
-u64 read_zcr_features(void)
-{
-	/*
-	 * Set the maximum possible VL, and write zeroes to all other
-	 * bits to see if they stick.
-	 */
-	sve_kernel_enable(NULL);
-	write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
-
-	/* Return LEN value that would be written to get the maximum VL */
-	return sve_vq_from_vl(sve_get_vl()) - 1;
-}
-
 void __init sve_setup(void)
 {
 	struct vl_info *info = &vl_info[ARM64_VEC_SVE];
-	u64 zcr;
 	DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
 	unsigned long b;
+	int max_bit;
 
 	if (!system_supports_sve())
 		return;
@@ -1208,17 +1154,8 @@ void __init sve_setup(void)
 	if (WARN_ON(!test_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map)))
 		set_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map);
 
-	zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
-	info->max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1);
-
-	/*
-	 * Sanity-check that the max VL we determined through CPU features
-	 * corresponds properly to sve_vq_map.  If not, do our best:
-	 */
-	if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SVE,
-								 info->max_vl)))
-		info->max_vl = find_supported_vector_length(ARM64_VEC_SVE,
-							    info->max_vl);
+	max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX);
+	info->max_vl = sve_vl_from_vq(__bit_to_vq(max_bit));
 
 	/*
 	 * For the default VL, pick the maximum supported value <= 64.
@@ -1298,7 +1235,7 @@ static void sme_free(struct task_struct *task)
 	task->thread.sme_state = NULL;
 }
 
-void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+void cpu_enable_sme(const struct arm64_cpu_capabilities *__always_unused p)
 {
 	/* Set priority for all PEs to architecturally defined minimum */
 	write_sysreg_s(read_sysreg_s(SYS_SMPRI_EL1) & ~SMPRI_EL1_PRIORITY_MASK,
@@ -1313,54 +1250,30 @@ void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
 	isb();
 }
 
-/*
- * This must be called after sme_kernel_enable(), we rely on the
- * feature table being sorted to ensure this.
- */
-void sme2_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+void cpu_enable_sme2(const struct arm64_cpu_capabilities *__always_unused p)
 {
+	/* This must be enabled after SME */
+	BUILD_BUG_ON(ARM64_SME2 <= ARM64_SME);
+
 	/* Allow use of ZT0 */
 	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_EZT0_MASK,
 		       SYS_SMCR_EL1);
 }
 
-/*
- * This must be called after sme_kernel_enable(), we rely on the
- * feature table being sorted to ensure this.
- */
-void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+void cpu_enable_fa64(const struct arm64_cpu_capabilities *__always_unused p)
 {
+	/* This must be enabled after SME */
+	BUILD_BUG_ON(ARM64_SME_FA64 <= ARM64_SME);
+
 	/* Allow use of FA64 */
 	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_FA64_MASK,
 		       SYS_SMCR_EL1);
 }
 
-/*
- * Read the pseudo-SMCR used by cpufeatures to identify the supported
- * vector length.
- *
- * Use only if SME is present.
- * This function clobbers the SME vector length.
- */
-u64 read_smcr_features(void)
-{
-	sme_kernel_enable(NULL);
-
-	/*
-	 * Set the maximum possible VL.
-	 */
-	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_LEN_MASK,
-		       SYS_SMCR_EL1);
-
-	/* Return LEN value that would be written to get the maximum VL */
-	return sve_vq_from_vl(sme_get_vl()) - 1;
-}
-
 void __init sme_setup(void)
 {
 	struct vl_info *info = &vl_info[ARM64_VEC_SME];
-	u64 smcr;
-	int min_bit;
+	int min_bit, max_bit;
 
 	if (!system_supports_sme())
 		return;
@@ -1369,24 +1282,16 @@ void __init sme_setup(void)
 	 * SME doesn't require any particular vector length be
 	 * supported but it does require at least one.  We should have
 	 * disabled the feature entirely while bringing up CPUs but
-	 * let's double check here.
+	 * let's double check here.  The bitmap is SVE_VQ_MAP sized for
+	 * sharing with SVE.
 	 */
 	WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX));
 
 	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
 	info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit));
 
-	smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1);
-	info->max_vl = sve_vl_from_vq((smcr & SMCR_ELx_LEN_MASK) + 1);
-
-	/*
-	 * Sanity-check that the max VL we determined through CPU features
-	 * corresponds properly to sme_vq_map.  If not, do our best:
-	 */
-	if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SME,
-								 info->max_vl)))
-		info->max_vl = find_supported_vector_length(ARM64_VEC_SME,
-							    info->max_vl);
+	max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX);
+	info->max_vl = sve_vl_from_vq(__bit_to_vq(max_bit));
 
 	WARN_ON(info->min_vl > info->max_vl);
 
@@ -1406,6 +1311,22 @@ void __init sme_setup(void)
 		get_sme_default_vl());
 }
 
+void sme_suspend_exit(void)
+{
+	u64 smcr = 0;
+
+	if (!system_supports_sme())
+		return;
+
+	if (system_supports_fa64())
+		smcr |= SMCR_ELx_FA64;
+	if (system_supports_sme2())
+		smcr |= SMCR_ELx_EZT0;
+
+	write_sysreg_s(smcr, SYS_SMCR_EL1);
+	write_sysreg_s(0, SYS_SMPRI_EL1);
+}
+
 #endif /* CONFIG_ARM64_SME */
 
 static void sve_init_regs(void)
@@ -1531,8 +1452,17 @@ void do_sme_acc(unsigned long esr, struct pt_regs *regs)
  */
 void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs)
 {
-	/* TODO: implement lazy context saving/restoring */
-	WARN_ON(1);
+	/* Even if we chose not to use FPSIMD, the hardware could still trap: */
+	if (!system_supports_fpsimd()) {
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+		return;
+	}
+
+	/*
+	 * When FPSIMD is enabled, we should never take a trap unless something
+	 * has gone very wrong.
+	 */
+	BUG();
 }
 
 /*
@@ -1560,6 +1490,55 @@ void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs)
 		       current);
 }
 
+static void fpsimd_load_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
+
+	/*
+	 * Elide the load if this CPU holds the most recent kernel mode
+	 * FPSIMD context of the current task.
+	 */
+	if (last->st == &task->thread.kernel_fpsimd_state &&
+	    task->thread.kernel_fpsimd_cpu == smp_processor_id())
+		return;
+
+	fpsimd_load_state(&task->thread.kernel_fpsimd_state);
+}
+
+static void fpsimd_save_kernel_state(struct task_struct *task)
+{
+	struct cpu_fp_state cpu_fp_state = {
+		.st		= &task->thread.kernel_fpsimd_state,
+		.to_save	= FP_STATE_FPSIMD,
+	};
+
+	fpsimd_save_state(&task->thread.kernel_fpsimd_state);
+	fpsimd_bind_state_to_cpu(&cpu_fp_state);
+
+	task->thread.kernel_fpsimd_cpu = smp_processor_id();
+}
+
+/*
+ * Invalidate any task's FPSIMD state that is present on this cpu.
+ * The FPSIMD context should be acquired with get_cpu_fpsimd_context()
+ * before calling this function.
+ */
+static void fpsimd_flush_cpu_state(void)
+{
+	WARN_ON(!system_supports_fpsimd());
+	__this_cpu_write(fpsimd_last_state.st, NULL);
+
+	/*
+	 * Leaving streaming mode enabled will cause issues for any kernel
+	 * NEON and leaving streaming mode or ZA enabled may increase power
+	 * consumption.
+	 */
+	if (system_supports_sme())
+		sme_smstop();
+
+	set_thread_flag(TIF_FOREIGN_FPSTATE);
+}
+
 void fpsimd_thread_switch(struct task_struct *next)
 {
 	bool wrong_task, wrong_cpu;
@@ -1567,24 +1546,31 @@ void fpsimd_thread_switch(struct task_struct *next)
 	if (!system_supports_fpsimd())
 		return;
 
-	__get_cpu_fpsimd_context();
+	WARN_ON_ONCE(!irqs_disabled());
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
-
-	/*
-	 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
-	 * state.  For kernel threads, FPSIMD registers are never loaded
-	 * and wrong_task and wrong_cpu will always be true.
-	 */
-	wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
-					&next->thread.uw.fpsimd_state;
-	wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_save_kernel_state(current);
+	else
+		fpsimd_save_user_state();
 
-	update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
-			       wrong_task || wrong_cpu);
+	if (test_tsk_thread_flag(next, TIF_KERNEL_FPSTATE)) {
+		fpsimd_load_kernel_state(next);
+		fpsimd_flush_cpu_state();
+	} else {
+		/*
+		 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
+		 * state.  For kernel threads, FPSIMD registers are never
+		 * loaded with user mode FPSIMD state and so wrong_task and
+		 * wrong_cpu will always be true.
+		 */
+		wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
+			&next->thread.uw.fpsimd_state;
+		wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
 
-	__put_cpu_fpsimd_context();
+		update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
+				       wrong_task || wrong_cpu);
+	}
 }
 
 static void fpsimd_flush_thread_vl(enum vec_type type)
@@ -1674,7 +1660,7 @@ void fpsimd_preserve_current_state(void)
 		return;
 
 	get_cpu_fpsimd_context();
-	fpsimd_save();
+	fpsimd_save_user_state();
 	put_cpu_fpsimd_context();
 }
 
@@ -1686,7 +1672,7 @@ void fpsimd_preserve_current_state(void)
 void fpsimd_signal_preserve_current_state(void)
 {
 	fpsimd_preserve_current_state();
-	if (test_thread_flag(TIF_SVE))
+	if (current->thread.fp_type == FP_STATE_SVE)
 		sve_to_fpsimd(current);
 }
 
@@ -1773,13 +1759,23 @@ void fpsimd_bind_state_to_cpu(struct cpu_fp_state *state)
 void fpsimd_restore_current_state(void)
 {
 	/*
-	 * For the tasks that were created before we detected the absence of
-	 * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(),
-	 * e.g, init. This could be then inherited by the children processes.
-	 * If we later detect that the system doesn't support FP/SIMD,
-	 * we must clear the flag for  all the tasks to indicate that the
-	 * FPSTATE is clean (as we can't have one) to avoid looping for ever in
-	 * do_notify_resume().
+	 * TIF_FOREIGN_FPSTATE is set on the init task and copied by
+	 * arch_dup_task_struct() regardless of whether FP/SIMD is detected.
+	 * Thus user threads can have this set even when FP/SIMD hasn't been
+	 * detected.
+	 *
+	 * When FP/SIMD is detected, begin_new_exec() will set
+	 * TIF_FOREIGN_FPSTATE via flush_thread() -> fpsimd_flush_thread(),
+	 * and fpsimd_thread_switch() will set TIF_FOREIGN_FPSTATE when
+	 * switching tasks. We detect FP/SIMD before we exec the first user
+	 * process, ensuring this has TIF_FOREIGN_FPSTATE set and
+	 * do_notify_resume() will call fpsimd_restore_current_state() to
+	 * install the user FP/SIMD context.
+	 *
+	 * When FP/SIMD is not detected, nothing else will clear or set
+	 * TIF_FOREIGN_FPSTATE prior to the first return to userspace, and
+	 * we must clear TIF_FOREIGN_FPSTATE to avoid do_notify_resume()
+	 * looping forever calling fpsimd_restore_current_state().
 	 */
 	if (!system_supports_fpsimd()) {
 		clear_thread_flag(TIF_FOREIGN_FPSTATE);
@@ -1850,39 +1846,20 @@ void fpsimd_flush_task_state(struct task_struct *t)
 }
 
 /*
- * Invalidate any task's FPSIMD state that is present on this cpu.
- * The FPSIMD context should be acquired with get_cpu_fpsimd_context()
- * before calling this function.
- */
-static void fpsimd_flush_cpu_state(void)
-{
-	WARN_ON(!system_supports_fpsimd());
-	__this_cpu_write(fpsimd_last_state.st, NULL);
-
-	/*
-	 * Leaving streaming mode enabled will cause issues for any kernel
-	 * NEON and leaving streaming mode or ZA enabled may increase power
-	 * consumption.
-	 */
-	if (system_supports_sme())
-		sme_smstop();
-
-	set_thread_flag(TIF_FOREIGN_FPSTATE);
-}
-
-/*
  * Save the FPSIMD state to memory and invalidate cpu view.
  * This function must be called with preemption disabled.
  */
 void fpsimd_save_and_flush_cpu_state(void)
 {
+	unsigned long flags;
+
 	if (!system_supports_fpsimd())
 		return;
 	WARN_ON(preemptible());
-	__get_cpu_fpsimd_context();
-	fpsimd_save();
+	local_irq_save(flags);
+	fpsimd_save_user_state();
 	fpsimd_flush_cpu_state();
-	__put_cpu_fpsimd_context();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON
@@ -1914,10 +1891,37 @@ void kernel_neon_begin(void)
 	get_cpu_fpsimd_context();
 
 	/* Save unsaved fpsimd state, if any: */
-	fpsimd_save();
+	if (test_thread_flag(TIF_KERNEL_FPSTATE)) {
+		BUG_ON(IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq());
+		fpsimd_save_kernel_state(current);
+	} else {
+		fpsimd_save_user_state();
+
+		/*
+		 * Set the thread flag so that the kernel mode FPSIMD state
+		 * will be context switched along with the rest of the task
+		 * state.
+		 *
+		 * On non-PREEMPT_RT, softirqs may interrupt task level kernel
+		 * mode FPSIMD, but the task will not be preemptible so setting
+		 * TIF_KERNEL_FPSTATE for those would be both wrong (as it
+		 * would mark the task context FPSIMD state as requiring a
+		 * context switch) and unnecessary.
+		 *
+		 * On PREEMPT_RT, softirqs are serviced from a separate thread,
+		 * which is scheduled as usual, and this guarantees that these
+		 * softirqs are not interrupting use of the FPSIMD in kernel
+		 * mode in task context. So in this case, setting the flag here
+		 * is always appropriate.
+		 */
+		if (IS_ENABLED(CONFIG_PREEMPT_RT) || !in_serving_softirq())
+			set_thread_flag(TIF_KERNEL_FPSTATE);
+	}
 
 	/* Invalidate any task state remaining in the fpsimd regs: */
 	fpsimd_flush_cpu_state();
+
+	put_cpu_fpsimd_context();
 }
 EXPORT_SYMBOL_GPL(kernel_neon_begin);
 
@@ -1935,7 +1939,16 @@ void kernel_neon_end(void)
 	if (!system_supports_fpsimd())
 		return;
 
-	put_cpu_fpsimd_context();
+	/*
+	 * If we are returning from a nested use of kernel mode FPSIMD, restore
+	 * the task context kernel mode FPSIMD state. This can only happen when
+	 * running in softirq context on non-PREEMPT_RT.
+	 */
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && in_serving_softirq() &&
+	    test_thread_flag(TIF_KERNEL_FPSTATE))
+		fpsimd_load_kernel_state(current);
+	else
+		clear_thread_flag(TIF_KERNEL_FPSTATE);
 }
 EXPORT_SYMBOL_GPL(kernel_neon_end);
 
@@ -2112,6 +2125,13 @@ static inline void fpsimd_hotplug_init(void)
 static inline void fpsimd_hotplug_init(void) { }
 #endif
 
+void cpu_enable_fpsimd(const struct arm64_cpu_capabilities *__always_unused p)
+{
+	unsigned long enable = CPACR_EL1_FPEN_EL1EN | CPACR_EL1_FPEN_EL0EN;
+	write_sysreg(read_sysreg(CPACR_EL1) | enable, CPACR_EL1);
+	isb();
+}
+
 /*
  * FP/SIMD support code initialisation.
  */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 7b236994f..a92905e6d 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -482,7 +482,7 @@ SYM_FUNC_START_LOCAL(__primary_switched)
 
 	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
 
-	ldr_l	x4, kimage_vaddr		// Save the offset between
+	adrp	x4, _text			// Save the offset between
 	sub	x4, x4, x0			// the kernel virtual and
 	str_l	x4, kimage_voffset, x5		// physical mappings
 
@@ -569,6 +569,11 @@ SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
 	adr_l	x1, __hyp_text_end
 	adr_l	x2, dcache_clean_poc
 	blr	x2
+
+	mov_q	x0, INIT_SCTLR_EL2_MMU_OFF
+	pre_disable_mmu_workaround
+	msr	sctlr_el2, x0
+	isb
 0:
 	mov_q	x0, HCR_HOST_NVHE_FLAGS
 	msr	hcr_el2, x0
diff --git a/arch/arm64/kernel/idle.c b/arch/arm64/kernel/idle.c
index c1125753f..05cfb347e 100644
--- a/arch/arm64/kernel/idle.c
+++ b/arch/arm64/kernel/idle.c
@@ -20,7 +20,7 @@
  *	ensure that interrupts are not masked at the PMR (because the core will
  *	not wake up if we block the wake up signal in the interrupt controller).
  */
-void noinstr cpu_do_idle(void)
+void __cpuidle cpu_do_idle(void)
 {
 	struct arm_cpuidle_irq_context context;
 
@@ -35,7 +35,7 @@ void noinstr cpu_do_idle(void)
 /*
  * This is our default idle handler.
  */
-void noinstr arch_cpu_idle(void)
+void __cpuidle arch_cpu_idle(void)
 {
 	/*
 	 * This should do all the clock switching and wait for interrupt
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 3addc09f8..e30fd9e32 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -21,14 +21,25 @@
 
 static u64 __boot_status __initdata;
 
+// temporary __prel64 related definitions
+// to be removed when this code is moved under pi/
+
+#define __prel64_initconst	__initconst
+
+#define PREL64(type, name)	union { type *name; }
+
+#define prel64_pointer(__d)	(__d)
+
+typedef bool filter_t(u64 val);
+
 struct ftr_set_desc {
 	char 				name[FTR_DESC_NAME_LEN];
-	struct arm64_ftr_override	*override;
+	PREL64(struct arm64_ftr_override, override);
 	struct {
 		char			name[FTR_DESC_FIELD_LEN];
 		u8			shift;
 		u8			width;
-		bool			(*filter)(u64 val);
+		PREL64(filter_t,	filter);
 	} 				fields[];
 };
 
@@ -46,7 +57,7 @@ static bool __init mmfr1_vh_filter(u64 val)
 		 val == 0);
 }
 
-static const struct ftr_set_desc mmfr1 __initconst = {
+static const struct ftr_set_desc mmfr1 __prel64_initconst = {
 	.name		= "id_aa64mmfr1",
 	.override	= &id_aa64mmfr1_override,
 	.fields		= {
@@ -70,7 +81,7 @@ static bool __init pfr0_sve_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr0 __initconst = {
+static const struct ftr_set_desc pfr0 __prel64_initconst = {
 	.name		= "id_aa64pfr0",
 	.override	= &id_aa64pfr0_override,
 	.fields		= {
@@ -94,7 +105,7 @@ static bool __init pfr1_sme_filter(u64 val)
 	return true;
 }
 
-static const struct ftr_set_desc pfr1 __initconst = {
+static const struct ftr_set_desc pfr1 __prel64_initconst = {
 	.name		= "id_aa64pfr1",
 	.override	= &id_aa64pfr1_override,
 	.fields		= {
@@ -105,7 +116,7 @@ static const struct ftr_set_desc pfr1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar1 __initconst = {
+static const struct ftr_set_desc isar1 __prel64_initconst = {
 	.name		= "id_aa64isar1",
 	.override	= &id_aa64isar1_override,
 	.fields		= {
@@ -117,7 +128,7 @@ static const struct ftr_set_desc isar1 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc isar2 __initconst = {
+static const struct ftr_set_desc isar2 __prel64_initconst = {
 	.name		= "id_aa64isar2",
 	.override	= &id_aa64isar2_override,
 	.fields		= {
@@ -128,7 +139,7 @@ static const struct ftr_set_desc isar2 __initconst = {
 	},
 };
 
-static const struct ftr_set_desc smfr0 __initconst = {
+static const struct ftr_set_desc smfr0 __prel64_initconst = {
 	.name		= "id_aa64smfr0",
 	.override	= &id_aa64smfr0_override,
 	.fields		= {
@@ -149,7 +160,7 @@ static bool __init hvhe_filter(u64 val)
 						     ID_AA64MMFR1_EL1_VH_SHIFT));
 }
 
-static const struct ftr_set_desc sw_features __initconst = {
+static const struct ftr_set_desc sw_features __prel64_initconst = {
 	.name		= "arm64_sw",
 	.override	= &arm64_sw_feature_override,
 	.fields		= {
@@ -159,22 +170,23 @@ static const struct ftr_set_desc sw_features __initconst = {
 	},
 };
 
-static const struct ftr_set_desc * const regs[] __initconst = {
-	&mmfr1,
-	&pfr0,
-	&pfr1,
-	&isar1,
-	&isar2,
-	&smfr0,
-	&sw_features,
+static const
+PREL64(const struct ftr_set_desc, reg) regs[] __prel64_initconst = {
+	{ &mmfr1	},
+	{ &pfr0 	},
+	{ &pfr1 	},
+	{ &isar1	},
+	{ &isar2	},
+	{ &smfr0	},
+	{ &sw_features	},
 };
 
 static const struct {
 	char	alias[FTR_ALIAS_NAME_LEN];
 	char	feature[FTR_ALIAS_OPTION_LEN];
 } aliases[] __initconst = {
-	{ "kvm-arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
-	{ "kvm-arm.mode=protected",	"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
+	{ "kvm_arm.mode=protected",	"id_aa64mmfr1.vh=0" },
 	{ "arm64.nosve",		"id_aa64pfr0.sve=0" },
 	{ "arm64.nosme",		"id_aa64pfr1.sme=0" },
 	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
@@ -187,45 +199,61 @@ static const struct {
 	{ "nokaslr",			"arm64_sw.nokaslr=1" },
 };
 
-static int __init parse_nokaslr(char *unused)
+static int __init parse_hexdigit(const char *p, u64 *v)
 {
-	/* nokaslr param handling is done by early cpufeature code */
+	// skip "0x" if it comes next
+	if (p[0] == '0' && tolower(p[1]) == 'x')
+		p += 2;
+
+	// check whether the RHS is a single hex digit
+	if (!isxdigit(p[0]) || (p[1] && !isspace(p[1])))
+		return -EINVAL;
+
+	*v = tolower(*p) - (isdigit(*p) ? '0' : 'a' - 10);
 	return 0;
 }
-early_param("nokaslr", parse_nokaslr);
 
-static int __init find_field(const char *cmdline,
+static int __init find_field(const char *cmdline, char *opt, int len,
 			     const struct ftr_set_desc *reg, int f, u64 *v)
 {
-	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
-	int len;
+	int flen = strlen(reg->fields[f].name);
 
-	len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=",
-		       reg->name, reg->fields[f].name);
+	// append '<fieldname>=' to obtain '<name>.<fieldname>='
+	memcpy(opt + len, reg->fields[f].name, flen);
+	len += flen;
+	opt[len++] = '=';
 
-	if (!parameqn(cmdline, opt, len))
+	if (memcmp(cmdline, opt, len))
 		return -1;
 
-	return kstrtou64(cmdline + len, 0, v);
+	return parse_hexdigit(cmdline + len, v);
 }
 
 static void __init match_options(const char *cmdline)
 {
+	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		const struct ftr_set_desc *reg = prel64_pointer(regs[i].reg);
+		struct arm64_ftr_override *override;
+		int len = strlen(reg->name);
 		int f;
 
-		if (!regs[i]->override)
-			continue;
+		override = prel64_pointer(reg->override);
 
-		for (f = 0; strlen(regs[i]->fields[f].name); f++) {
-			u64 shift = regs[i]->fields[f].shift;
-			u64 width = regs[i]->fields[f].width ?: 4;
+		// set opt[] to '<name>.'
+		memcpy(opt, reg->name, len);
+		opt[len++] = '.';
+
+		for (f = 0; reg->fields[f].name[0] != '\0'; f++) {
+			u64 shift = reg->fields[f].shift;
+			u64 width = reg->fields[f].width ?: 4;
 			u64 mask = GENMASK_ULL(shift + width - 1, shift);
+			bool (*filter)(u64 val);
 			u64 v;
 
-			if (find_field(cmdline, regs[i], f, &v))
+			if (find_field(cmdline, opt, len, reg, f, &v))
 				continue;
 
 			/*
@@ -233,16 +261,16 @@ static void __init match_options(const char *cmdline)
 			 * it by setting the value to the all-ones while
 			 * clearing the mask... Yes, this is fragile.
 			 */
-			if (regs[i]->fields[f].filter &&
-			    !regs[i]->fields[f].filter(v)) {
-				regs[i]->override->val  |= mask;
-				regs[i]->override->mask &= ~mask;
+			filter = prel64_pointer(reg->fields[f].filter);
+			if (filter && !filter(v)) {
+				override->val  |= mask;
+				override->mask &= ~mask;
 				continue;
 			}
 
-			regs[i]->override->val  &= ~mask;
-			regs[i]->override->val  |= (v << shift) & mask;
-			regs[i]->override->mask |= mask;
+			override->val  &= ~mask;
+			override->val  |= (v << shift) & mask;
+			override->mask |= mask;
 
 			return;
 		}
@@ -258,23 +286,29 @@ static __init void __parse_cmdline(const char *cmdline, bool parse_aliases)
 
 		cmdline = skip_spaces(cmdline);
 
-		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++);
-		if (!len)
+		/* terminate on "--" appearing on the command line by itself */
+		if (cmdline[0] == '-' && cmdline[1] == '-' && isspace(cmdline[2]))
 			return;
 
-		len = min(len, ARRAY_SIZE(buf) - 1);
-		memcpy(buf, cmdline, len);
-		buf[len] = '\0';
-
-		if (strcmp(buf, "--") == 0)
+		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++) {
+			if (len >= sizeof(buf) - 1)
+				break;
+			if (cmdline[len] == '-')
+				buf[len] = '_';
+			else
+				buf[len] = cmdline[len];
+		}
+		if (!len)
 			return;
 
+		buf[len] = 0;
+
 		cmdline += len;
 
 		match_options(buf);
 
 		for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++)
-			if (parameq(buf, aliases[i].alias))
+			if (!memcmp(buf, aliases[i].alias, len + 1))
 				__parse_cmdline(aliases[i].feature, false);
 	} while (1);
 }
@@ -316,13 +350,16 @@ void init_feature_override(u64 boot_status);
 
 asmlinkage void __init init_feature_override(u64 boot_status)
 {
+	struct arm64_ftr_override *override;
+	const struct ftr_set_desc *reg;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override) {
-			regs[i]->override->val  = 0;
-			regs[i]->override->mask = 0;
-		}
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+
+		override->val  = 0;
+		override->mask = 0;
 	}
 
 	__boot_status = boot_status;
@@ -330,9 +367,9 @@ asmlinkage void __init init_feature_override(u64 boot_status)
 	parse_cmdline();
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		if (regs[i]->override)
-			dcache_clean_inval_poc((unsigned long)regs[i]->override,
-					    (unsigned long)regs[i]->override +
-					    sizeof(*regs[i]->override));
+		reg = prel64_pointer(regs[i].reg);
+		override = prel64_pointer(reg->override);
+		dcache_clean_inval_poc((unsigned long)override,
+				       (unsigned long)(override + 1));
 	}
 }
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
index 35f3c7959..5e4dc72ab 100644
--- a/arch/arm64/kernel/image-vars.h
+++ b/arch/arm64/kernel/image-vars.h
@@ -27,7 +27,9 @@ PROVIDE(__efistub__text			= _text);
 PROVIDE(__efistub__end			= _end);
 PROVIDE(__efistub___inittext_end       	= __inittext_end);
 PROVIDE(__efistub__edata		= _edata);
+#if defined(CONFIG_EFI_EARLYCON) || defined(CONFIG_SYSFB)
 PROVIDE(__efistub_screen_info		= screen_info);
+#endif
 PROVIDE(__efistub__ctype		= _ctype);
 
 PROVIDE(__pi___memcpy			= __pi_memcpy);
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 6ad5c6ef5..85087e2df 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -22,6 +22,7 @@
 #include <linux/vmalloc.h>
 #include <asm/daifflags.h>
 #include <asm/exception.h>
+#include <asm/numa.h>
 #include <asm/softirq_stack.h>
 #include <asm/stacktrace.h>
 #include <asm/vmap_stack.h>
@@ -47,17 +48,17 @@ static void init_irq_scs(void)
 
 	for_each_possible_cpu(cpu)
 		per_cpu(irq_shadow_call_stack_ptr, cpu) =
-			scs_alloc(cpu_to_node(cpu));
+			scs_alloc(early_cpu_to_node(cpu));
 }
 
 #ifdef CONFIG_VMAP_STACK
-static void init_irq_stacks(void)
+static void __init init_irq_stacks(void)
 {
 	int cpu;
 	unsigned long *p;
 
 	for_each_possible_cpu(cpu) {
-		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu));
+		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, early_cpu_to_node(cpu));
 		per_cpu(irq_stack_ptr, cpu) = p;
 	}
 }
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index 94a269cd1..12c7f3c8b 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -36,3 +36,10 @@ void __init kaslr_init(void)
 	pr_info("KASLR enabled\n");
 	__kaslr_is_enabled = true;
 }
+
+static int __init parse_nokaslr(char *unused)
+{
+	/* nokaslr param handling is done by early cpufeature code */
+	return 0;
+}
+early_param("nokaslr", parse_nokaslr);
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
index 636be6715..532d72ea4 100644
--- a/arch/arm64/kernel/kexec_image.c
+++ b/arch/arm64/kernel/kexec_image.c
@@ -122,9 +122,9 @@ static void *image_load(struct kimage *image,
 	kernel_segment->memsz -= text_offset;
 	image->start = kernel_segment->mem;
 
-	pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				kernel_segment->mem, kbuf.bufsz,
-				kernel_segment->memsz);
+	kexec_dprintk("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kernel_segment->mem, kbuf.bufsz,
+		      kernel_segment->memsz);
 
 	return NULL;
 }
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
index 078910db7..b38aae5b4 100644
--- a/arch/arm64/kernel/machine_kexec.c
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -32,26 +32,12 @@
 static void _kexec_image_info(const char *func, int line,
 	const struct kimage *kimage)
 {
-	unsigned long i;
-
-	pr_debug("%s:%d:\n", func, line);
-	pr_debug("  kexec kimage info:\n");
-	pr_debug("    type:        %d\n", kimage->type);
-	pr_debug("    start:       %lx\n", kimage->start);
-	pr_debug("    head:        %lx\n", kimage->head);
-	pr_debug("    nr_segments: %lu\n", kimage->nr_segments);
-	pr_debug("    dtb_mem: %pa\n", &kimage->arch.dtb_mem);
-	pr_debug("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
-	pr_debug("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
-
-	for (i = 0; i < kimage->nr_segments; i++) {
-		pr_debug("      segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
-			i,
-			kimage->segment[i].mem,
-			kimage->segment[i].mem + kimage->segment[i].memsz,
-			kimage->segment[i].memsz,
-			kimage->segment[i].memsz /  PAGE_SIZE);
-	}
+	kexec_dprintk("%s:%d:\n", func, line);
+	kexec_dprintk("  kexec kimage info:\n");
+	kexec_dprintk("    type:        %d\n", kimage->type);
+	kexec_dprintk("    head:        %lx\n", kimage->head);
+	kexec_dprintk("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
+	kexec_dprintk("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
 }
 
 void machine_kexec_cleanup(struct kimage *kimage)
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index a11a6e14b..0e017358f 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -127,8 +127,8 @@ int load_other_segments(struct kimage *image,
 		image->elf_load_addr = kbuf.mem;
 		image->elf_headers_sz = headers_sz;
 
-		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load initrd */
@@ -148,8 +148,8 @@ int load_other_segments(struct kimage *image,
 			goto out_err;
 		initrd_load_addr = kbuf.mem;
 
-		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-				initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			      initrd_load_addr, kbuf.bufsz, kbuf.memsz);
 	}
 
 	/* load dtb */
@@ -179,8 +179,8 @@ int load_other_segments(struct kimage *image,
 	image->arch.dtb = dtb;
 	image->arch.dtb_mem = kbuf.mem;
 
-	pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
-			kbuf.mem, kbuf.bufsz, kbuf.memsz);
+	kexec_dprintk("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+		      kbuf.mem, kbuf.bufsz, kbuf.memsz);
 
 	return 0;
 
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
index 79200f21e..bde32979c 100644
--- a/arch/arm64/kernel/module-plts.c
+++ b/arch/arm64/kernel/module-plts.c
@@ -200,8 +200,7 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num,
 			break;
 		case R_AARCH64_ADR_PREL_PG_HI21_NC:
 		case R_AARCH64_ADR_PREL_PG_HI21:
-			if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) ||
-			    !cpus_have_const_cap(ARM64_WORKAROUND_843419))
+			if (!cpus_have_final_cap(ARM64_WORKAROUND_843419))
 				break;
 
 			/*
@@ -236,13 +235,13 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num,
 		}
 	}
 
-	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) &&
-	    cpus_have_const_cap(ARM64_WORKAROUND_843419))
+	if (cpus_have_final_cap(ARM64_WORKAROUND_843419)) {
 		/*
 		 * Add some slack so we can skip PLT slots that may trigger
 		 * the erratum due to the placement of the ADRP instruction.
 		 */
 		ret += DIV_ROUND_UP(ret, (SZ_4K / sizeof(struct plt_entry)));
+	}
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index 4edecaac8..a41ef3213 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -35,10 +35,10 @@ DEFINE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
 EXPORT_SYMBOL_GPL(mte_async_or_asymm_mode);
 #endif
 
-void mte_sync_tags(pte_t pte)
+void mte_sync_tags(pte_t pte, unsigned int nr_pages)
 {
 	struct page *page = pte_page(pte);
-	long i, nr_pages = compound_nr(page);
+	unsigned int i;
 
 	/* if PG_mte_tagged is set, tags have already been initialised */
 	for (i = 0; i < nr_pages; i++, page++) {
@@ -411,8 +411,8 @@ static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
 		struct page *page = get_user_page_vma_remote(mm, addr,
 							     gup_flags, &vma);
 
-		if (IS_ERR_OR_NULL(page)) {
-			err = page == NULL ? -EIO : PTR_ERR(page);
+		if (IS_ERR(page)) {
+			err = PTR_ERR(page);
 			break;
 		}
 
diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
index 4c0ea3cd4..c844a0546 100644
--- a/arch/arm64/kernel/pi/Makefile
+++ b/arch/arm64/kernel/pi/Makefile
@@ -3,6 +3,7 @@
 
 KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
 		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   $(DISABLE_LATENT_ENTROPY_PLUGIN) \
 		   $(call cc-option,-mbranch-protection=none) \
 		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 		   -include $(srctree)/include/linux/hidden.h \
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 0fcc4eb1a..7387b68c7 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -454,7 +454,7 @@ static void ssbs_thread_switch(struct task_struct *next)
 	 * If all CPUs implement the SSBS extension, then we just need to
 	 * context-switch the PSTATE field.
 	 */
-	if (cpus_have_const_cap(ARM64_SSBS))
+	if (alternative_has_cap_unlikely(ARM64_SSBS))
 		return;
 
 	spectre_v4_enable_task_mitigation(next);
@@ -724,7 +724,6 @@ static struct ctl_table tagged_addr_sysctl_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= SYSCTL_ONE,
 	},
-	{ }
 };
 
 static int __init tagged_addr_init(void)
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index 05f40c4e1..6268a13a1 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -972,7 +972,7 @@ static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
 	 * When KPTI is in use, the vectors are switched when exiting to
 	 * user-space.
 	 */
-	if (arm64_kernel_unmapped_at_el0())
+	if (cpus_have_cap(ARM64_UNMAP_KERNEL_AT_EL0))
 		return;
 
 	write_sysreg(v, vbar_el1);
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index b3f64144b..964d0446d 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -28,6 +28,7 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/rseq.h>
 
 #include <asm/compat.h>
 #include <asm/cpufeature.h>
@@ -728,7 +729,6 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 {
 	unsigned int vq;
 	bool active;
-	bool fpsimd_only;
 	enum vec_type task_type;
 
 	memset(header, 0, sizeof(*header));
@@ -744,12 +744,10 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 	case ARM64_VEC_SVE:
 		if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
 			header->flags |= SVE_PT_VL_INHERIT;
-		fpsimd_only = !test_tsk_thread_flag(target, TIF_SVE);
 		break;
 	case ARM64_VEC_SME:
 		if (test_tsk_thread_flag(target, TIF_SME_VL_INHERIT))
 			header->flags |= SVE_PT_VL_INHERIT;
-		fpsimd_only = false;
 		break;
 	default:
 		WARN_ON_ONCE(1);
@@ -757,7 +755,7 @@ static void sve_init_header_from_task(struct user_sve_header *header,
 	}
 
 	if (active) {
-		if (fpsimd_only) {
+		if (target->thread.fp_type == FP_STATE_FPSIMD) {
 			header->flags |= SVE_PT_REGS_FPSIMD;
 		} else {
 			header->flags |= SVE_PT_REGS_SVE;
@@ -1499,7 +1497,8 @@ static const struct user_regset aarch64_regsets[] = {
 #ifdef CONFIG_ARM64_SVE
 	[REGSET_SVE] = { /* Scalable Vector Extension */
 		.core_note_type = NT_ARM_SVE,
-		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(ARCH_SVE_VQ_MAX,
+					      SVE_PT_REGS_SVE),
 				  SVE_VQ_BYTES),
 		.size = SVE_VQ_BYTES,
 		.align = SVE_VQ_BYTES,
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 417a8a86b..42c690bb2 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -402,19 +402,10 @@ static inline bool cpu_can_disable(unsigned int cpu)
 	return false;
 }
 
-static int __init topology_init(void)
+bool arch_cpu_is_hotpluggable(int num)
 {
-	int i;
-
-	for_each_possible_cpu(i) {
-		struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
-		cpu->hotpluggable = cpu_can_disable(i);
-		register_cpu(cpu, i);
-	}
-
-	return 0;
+	return cpu_can_disable(num);
 }
-subsys_initcall(topology_init);
 
 static void dump_kernel_offset(void)
 {
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0e8beb334..425b1bc17 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -242,7 +242,7 @@ static int preserve_sve_context(struct sve_context __user *ctx)
 		vl = task_get_sme_vl(current);
 		vq = sve_vq_from_vl(vl);
 		flags |= SVE_SIG_FLAG_SM;
-	} else if (test_thread_flag(TIF_SVE)) {
+	} else if (current->thread.fp_type == FP_STATE_SVE) {
 		vq = sve_vq_from_vl(vl);
 	}
 
@@ -878,7 +878,7 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 	if (system_supports_sve() || system_supports_sme()) {
 		unsigned int vq = 0;
 
-		if (add_all || test_thread_flag(TIF_SVE) ||
+		if (add_all || current->thread.fp_type == FP_STATE_SVE ||
 		    thread_sm_enabled(&current->thread)) {
 			int vl = max(sve_max_vl(), sme_max_vl());
 
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 960b98b43..4ced34f62 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -32,7 +32,9 @@
 #include <linux/irq_work.h>
 #include <linux/kernel_stat.h>
 #include <linux/kexec.h>
+#include <linux/kgdb.h>
 #include <linux/kvm_host.h>
+#include <linux/nmi.h>
 
 #include <asm/alternative.h>
 #include <asm/atomic.h>
@@ -72,13 +74,19 @@ enum ipi_msg_type {
 	IPI_CPU_CRASH_STOP,
 	IPI_TIMER,
 	IPI_IRQ_WORK,
-	IPI_WAKEUP,
-	NR_IPI
+	NR_IPI,
+	/*
+	 * Any enum >= NR_IPI and < MAX_IPI is special and not tracable
+	 * with trace_ipi_*
+	 */
+	IPI_CPU_BACKTRACE = NR_IPI,
+	IPI_KGDB_ROUNDUP,
+	MAX_IPI
 };
 
-static int ipi_irq_base __read_mostly;
-static int nr_ipi __read_mostly = NR_IPI;
-static struct irq_desc *ipi_desc[NR_IPI] __read_mostly;
+static int ipi_irq_base __ro_after_init;
+static int nr_ipi __ro_after_init = NR_IPI;
+static struct irq_desc *ipi_desc[MAX_IPI] __ro_after_init;
 
 static void ipi_setup(int cpu);
 
@@ -215,7 +223,7 @@ asmlinkage notrace void secondary_start_kernel(void)
 	if (system_uses_irq_prio_masking())
 		init_gic_priority_masking();
 
-	rcu_cpu_starting(cpu);
+	rcutree_report_cpu_starting(cpu);
 	trace_hardirqs_off();
 
 	/*
@@ -401,7 +409,7 @@ void __noreturn cpu_die_early(void)
 
 	/* Mark this CPU absent */
 	set_cpu_present(cpu, 0);
-	rcu_report_dead(cpu);
+	rcutree_report_cpu_dead();
 
 	if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
 		update_cpu_boot_status(CPU_KILL_ME);
@@ -431,9 +439,9 @@ static void __init hyp_mode_check(void)
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
-	setup_cpu_features();
 	hyp_mode_check();
-	apply_alternatives_all();
+	setup_system_features();
+	setup_user_features();
 	mark_linear_text_alias_ro();
 }
 
@@ -445,14 +453,9 @@ void __init smp_prepare_boot_cpu(void)
 	 * freed shortly, so we must move over to the runtime per-cpu area.
 	 */
 	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
-	cpuinfo_store_boot_cpu();
 
-	/*
-	 * We now know enough about the boot CPU to apply the
-	 * alternatives that cannot wait until interrupt handling
-	 * and/or scheduling is enabled.
-	 */
-	apply_boot_alternatives();
+	cpuinfo_store_boot_cpu();
+	setup_boot_cpu_features();
 
 	/* Conditionally switch to GIC PMR for interrupt masking */
 	if (system_uses_irq_prio_masking())
@@ -520,7 +523,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 {
 	u64 hwid = processor->arm_mpidr;
 
-	if (!(processor->flags & ACPI_MADT_ENABLED)) {
+	if (!acpi_gicc_is_usable(processor)) {
 		pr_debug("skipping disabled CPU entry with 0x%llx MPIDR\n", hwid);
 		return;
 	}
@@ -764,7 +767,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	[IPI_CPU_CRASH_STOP]	= "CPU stop (for crash dump) interrupts",
 	[IPI_TIMER]		= "Timer broadcast interrupts",
 	[IPI_IRQ_WORK]		= "IRQ work interrupts",
-	[IPI_WAKEUP]		= "CPU wake-up interrupts",
 };
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr);
@@ -797,13 +799,6 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
 }
 
-#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
-void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
-{
-	smp_cross_call(mask, IPI_WAKEUP);
-}
-#endif
-
 #ifdef CONFIG_IRQ_WORK
 void arch_irq_work_raise(void)
 {
@@ -854,6 +849,38 @@ static void __noreturn ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs
 #endif
 }
 
+static void arm64_backtrace_ipi(cpumask_t *mask)
+{
+	__ipi_send_mask(ipi_desc[IPI_CPU_BACKTRACE], mask);
+}
+
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu)
+{
+	/*
+	 * NOTE: though nmi_trigger_cpumask_backtrace() has "nmi_" in the name,
+	 * nothing about it truly needs to be implemented using an NMI, it's
+	 * just that it's _allowed_ to work with NMIs. If ipi_should_be_nmi()
+	 * returned false our backtrace attempt will just use a regular IPI.
+	 */
+	nmi_trigger_cpumask_backtrace(mask, exclude_cpu, arm64_backtrace_ipi);
+}
+
+#ifdef CONFIG_KGDB
+void kgdb_roundup_cpus(void)
+{
+	int this_cpu = raw_smp_processor_id();
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		/* No need to roundup ourselves */
+		if (cpu == this_cpu)
+			continue;
+
+		__ipi_send_single(ipi_desc[IPI_KGDB_ROUNDUP], cpu);
+	}
+}
+#endif
+
 /*
  * Main handler for inter-processor interrupts
  */
@@ -897,13 +924,17 @@ static void do_handle_IPI(int ipinr)
 		break;
 #endif
 
-#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
-	case IPI_WAKEUP:
-		WARN_ONCE(!acpi_parking_protocol_valid(cpu),
-			  "CPU%u: Wake-up IPI outside the ACPI parking protocol\n",
-			  cpu);
+	case IPI_CPU_BACKTRACE:
+		/*
+		 * NOTE: in some cases this _won't_ be NMI context. See the
+		 * comment in arch_trigger_cpumask_backtrace().
+		 */
+		nmi_cpu_backtrace(get_irq_regs());
+		break;
+
+	case IPI_KGDB_ROUNDUP:
+		kgdb_nmicallback(cpu, get_irq_regs());
 		break;
-#endif
 
 	default:
 		pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr);
@@ -926,6 +957,22 @@ static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 	__ipi_send_mask(ipi_desc[ipinr], target);
 }
 
+static bool ipi_should_be_nmi(enum ipi_msg_type ipi)
+{
+	if (!system_uses_irq_prio_masking())
+		return false;
+
+	switch (ipi) {
+	case IPI_CPU_STOP:
+	case IPI_CPU_CRASH_STOP:
+	case IPI_CPU_BACKTRACE:
+	case IPI_KGDB_ROUNDUP:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static void ipi_setup(int cpu)
 {
 	int i;
@@ -933,8 +980,14 @@ static void ipi_setup(int cpu)
 	if (WARN_ON_ONCE(!ipi_irq_base))
 		return;
 
-	for (i = 0; i < nr_ipi; i++)
-		enable_percpu_irq(ipi_irq_base + i, 0);
+	for (i = 0; i < nr_ipi; i++) {
+		if (ipi_should_be_nmi(i)) {
+			prepare_percpu_nmi(ipi_irq_base + i);
+			enable_percpu_nmi(ipi_irq_base + i, 0);
+		} else {
+			enable_percpu_irq(ipi_irq_base + i, 0);
+		}
+	}
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -945,8 +998,14 @@ static void ipi_teardown(int cpu)
 	if (WARN_ON_ONCE(!ipi_irq_base))
 		return;
 
-	for (i = 0; i < nr_ipi; i++)
-		disable_percpu_irq(ipi_irq_base + i);
+	for (i = 0; i < nr_ipi; i++) {
+		if (ipi_should_be_nmi(i)) {
+			disable_percpu_nmi(ipi_irq_base + i);
+			teardown_percpu_nmi(ipi_irq_base + i);
+		} else {
+			disable_percpu_irq(ipi_irq_base + i);
+		}
+	}
 }
 #endif
 
@@ -954,15 +1013,23 @@ void __init set_smp_ipi_range(int ipi_base, int n)
 {
 	int i;
 
-	WARN_ON(n < NR_IPI);
-	nr_ipi = min(n, NR_IPI);
+	WARN_ON(n < MAX_IPI);
+	nr_ipi = min(n, MAX_IPI);
 
 	for (i = 0; i < nr_ipi; i++) {
 		int err;
 
-		err = request_percpu_irq(ipi_base + i, ipi_handler,
-					 "IPI", &cpu_number);
-		WARN_ON(err);
+		if (ipi_should_be_nmi(i)) {
+			err = request_percpu_nmi(ipi_base + i, ipi_handler,
+						 "IPI", &cpu_number);
+			WARN(err, "Could not request IPI %d as NMI, err=%d\n",
+			     i, err);
+		} else {
+			err = request_percpu_irq(ipi_base + i, ipi_handler,
+						 "IPI", &cpu_number);
+			WARN(err, "Could not request IPI %d as IRQ, err=%d\n",
+			     i, err);
+		}
 
 		ipi_desc[i] = irq_to_desc(ipi_base + i);
 		irq_set_status_flags(ipi_base + i, IRQ_HIDDEN);
@@ -979,6 +1046,17 @@ void arch_smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+void arch_send_wakeup_ipi(unsigned int cpu)
+{
+	/*
+	 * We use a scheduler IPI to wake the CPU as this avoids the need for a
+	 * dedicated IPI and we can safely handle spurious scheduler IPIs.
+	 */
+	smp_send_reschedule(cpu);
+}
+#endif
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 void tick_broadcast(const struct cpumask *mask)
 {
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 17f66a74c..b2a60e0bc 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -8,6 +8,7 @@
 #include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/ftrace.h>
+#include <linux/kprobes.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/sched/task_stack.h>
@@ -19,6 +20,31 @@
 #include <asm/stacktrace.h>
 
 /*
+ * Kernel unwind state
+ *
+ * @common:      Common unwind state.
+ * @task:        The task being unwound.
+ * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
+ *               associated with the most recently encountered replacement lr
+ *               value.
+ */
+struct kunwind_state {
+	struct unwind_state common;
+	struct task_struct *task;
+#ifdef CONFIG_KRETPROBES
+	struct llist_node *kr_cur;
+#endif
+};
+
+static __always_inline void
+kunwind_init(struct kunwind_state *state,
+	     struct task_struct *task)
+{
+	unwind_init_common(&state->common);
+	state->task = task;
+}
+
+/*
  * Start an unwind from a pt_regs.
  *
  * The unwind will begin at the PC within the regs.
@@ -26,13 +52,13 @@
  * The regs must be on a stack currently owned by the calling task.
  */
 static __always_inline void
-unwind_init_from_regs(struct unwind_state *state,
-		      struct pt_regs *regs)
+kunwind_init_from_regs(struct kunwind_state *state,
+		       struct pt_regs *regs)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = regs->regs[29];
-	state->pc = regs->pc;
+	state->common.fp = regs->regs[29];
+	state->common.pc = regs->pc;
 }
 
 /*
@@ -44,12 +70,12 @@ unwind_init_from_regs(struct unwind_state *state,
  * The function which invokes this must be noinline.
  */
 static __always_inline void
-unwind_init_from_caller(struct unwind_state *state)
+kunwind_init_from_caller(struct kunwind_state *state)
 {
-	unwind_init_common(state, current);
+	kunwind_init(state, current);
 
-	state->fp = (unsigned long)__builtin_frame_address(1);
-	state->pc = (unsigned long)__builtin_return_address(0);
+	state->common.fp = (unsigned long)__builtin_frame_address(1);
+	state->common.pc = (unsigned long)__builtin_return_address(0);
 }
 
 /*
@@ -63,35 +89,38 @@ unwind_init_from_caller(struct unwind_state *state)
  * call this for the current task.
  */
 static __always_inline void
-unwind_init_from_task(struct unwind_state *state,
-		      struct task_struct *task)
+kunwind_init_from_task(struct kunwind_state *state,
+		       struct task_struct *task)
 {
-	unwind_init_common(state, task);
+	kunwind_init(state, task);
 
-	state->fp = thread_saved_fp(task);
-	state->pc = thread_saved_pc(task);
+	state->common.fp = thread_saved_fp(task);
+	state->common.pc = thread_saved_pc(task);
 }
 
 static __always_inline int
-unwind_recover_return_address(struct unwind_state *state)
+kunwind_recover_return_address(struct kunwind_state *state)
 {
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	if (state->task->ret_stack &&
-	    (state->pc == (unsigned long)return_to_handler)) {
+	    (state->common.pc == (unsigned long)return_to_handler)) {
 		unsigned long orig_pc;
-		orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc,
-						(void *)state->fp);
-		if (WARN_ON_ONCE(state->pc == orig_pc))
+		orig_pc = ftrace_graph_ret_addr(state->task, NULL,
+						state->common.pc,
+						(void *)state->common.fp);
+		if (WARN_ON_ONCE(state->common.pc == orig_pc))
 			return -EINVAL;
-		state->pc = orig_pc;
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
 #ifdef CONFIG_KRETPROBES
-	if (is_kretprobe_trampoline(state->pc)) {
-		state->pc = kretprobe_find_ret_addr(state->task,
-						    (void *)state->fp,
-						    &state->kr_cur);
+	if (is_kretprobe_trampoline(state->common.pc)) {
+		unsigned long orig_pc;
+		orig_pc = kretprobe_find_ret_addr(state->task,
+						  (void *)state->common.fp,
+						  &state->kr_cur);
+		state->common.pc = orig_pc;
 	}
 #endif /* CONFIG_KRETPROBES */
 
@@ -106,38 +135,40 @@ unwind_recover_return_address(struct unwind_state *state)
  * and the location (but not the fp value) of B.
  */
 static __always_inline int
-unwind_next(struct unwind_state *state)
+kunwind_next(struct kunwind_state *state)
 {
 	struct task_struct *tsk = state->task;
-	unsigned long fp = state->fp;
+	unsigned long fp = state->common.fp;
 	int err;
 
 	/* Final frame; nothing to unwind */
 	if (fp == (unsigned long)task_pt_regs(tsk)->stackframe)
 		return -ENOENT;
 
-	err = unwind_next_frame_record(state);
+	err = unwind_next_frame_record(&state->common);
 	if (err)
 		return err;
 
-	state->pc = ptrauth_strip_kernel_insn_pac(state->pc);
+	state->common.pc = ptrauth_strip_kernel_insn_pac(state->common.pc);
 
-	return unwind_recover_return_address(state);
+	return kunwind_recover_return_address(state);
 }
 
+typedef bool (*kunwind_consume_fn)(const struct kunwind_state *state, void *cookie);
+
 static __always_inline void
-unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
-       void *cookie)
+do_kunwind(struct kunwind_state *state, kunwind_consume_fn consume_state,
+	   void *cookie)
 {
-	if (unwind_recover_return_address(state))
+	if (kunwind_recover_return_address(state))
 		return;
 
 	while (1) {
 		int ret;
 
-		if (!consume_entry(cookie, state->pc))
+		if (!consume_state(state, cookie))
 			break;
-		ret = unwind_next(state);
+		ret = kunwind_next(state);
 		if (ret < 0)
 			break;
 	}
@@ -172,9 +203,10 @@ unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
 			: stackinfo_get_unknown();		\
 	})
 
-noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
-			      void *cookie, struct task_struct *task,
-			      struct pt_regs *regs)
+static __always_inline void
+kunwind_stack_walk(kunwind_consume_fn consume_state,
+		   void *cookie, struct task_struct *task,
+		   struct pt_regs *regs)
 {
 	struct stack_info stacks[] = {
 		stackinfo_get_task(task),
@@ -190,22 +222,48 @@ noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
 		STACKINFO_EFI,
 #endif
 	};
-	struct unwind_state state = {
-		.stacks = stacks,
-		.nr_stacks = ARRAY_SIZE(stacks),
+	struct kunwind_state state = {
+		.common = {
+			.stacks = stacks,
+			.nr_stacks = ARRAY_SIZE(stacks),
+		},
 	};
 
 	if (regs) {
 		if (task != current)
 			return;
-		unwind_init_from_regs(&state, regs);
+		kunwind_init_from_regs(&state, regs);
 	} else if (task == current) {
-		unwind_init_from_caller(&state);
+		kunwind_init_from_caller(&state);
 	} else {
-		unwind_init_from_task(&state, task);
+		kunwind_init_from_task(&state, task);
 	}
 
-	unwind(&state, consume_entry, cookie);
+	do_kunwind(&state, consume_state, cookie);
+}
+
+struct kunwind_consume_entry_data {
+	stack_trace_consume_fn consume_entry;
+	void *cookie;
+};
+
+static __always_inline bool
+arch_kunwind_consume_entry(const struct kunwind_state *state, void *cookie)
+{
+	struct kunwind_consume_entry_data *data = cookie;
+	return data->consume_entry(data->cookie, state->common.pc);
+}
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
+			      void *cookie, struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	struct kunwind_consume_entry_data data = {
+		.consume_entry = consume_entry,
+		.cookie = cookie,
+	};
+
+	kunwind_stack_walk(arch_kunwind_consume_entry, &data, task, regs);
 }
 
 static bool dump_backtrace_entry(void *arg, unsigned long where)
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index 0fbdf5fe6..eaaff9432 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -12,6 +12,7 @@
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
 #include <asm/exec.h>
+#include <asm/fpsimd.h>
 #include <asm/mte.h>
 #include <asm/memory.h>
 #include <asm/mmu_context.h>
@@ -55,13 +56,13 @@ void notrace __cpu_suspend_exit(void)
 
 	/* Restore CnP bit in TTBR1_EL1 */
 	if (system_supports_cnp())
-		cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
+		cpu_enable_swapper_cnp();
 
 	/*
 	 * PSTATE was not saved over suspend/resume, re-enable any detected
 	 * features that might not have been set correctly.
 	 */
-	if (cpus_have_const_cap(ARM64_HAS_DIT))
+	if (alternative_has_cap_unlikely(ARM64_HAS_DIT))
 		set_pstate_dit(1);
 	__uaccess_enable_hw_pan();
 
@@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void)
 	 */
 	spectre_v4_enable_mitigation(NULL);
 
+	sme_suspend_exit();
+
 	/* Restore additional feature-specific configuration */
 	ptrauth_suspend_exit();
 }
@@ -98,6 +101,15 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	struct sleep_stack_data state;
 	struct arm_cpuidle_irq_context context;
 
+	/*
+	 * Some portions of CPU state (e.g. PSTATE.{PAN,DIT}) are initialized
+	 * before alternatives are patched, but are only restored by
+	 * __cpu_suspend_exit() after alternatives are patched. To avoid
+	 * accidentally losing these bits we must not attempt to suspend until
+	 * after alternatives have been patched.
+	 */
+	WARN_ON(!system_capabilities_finalized());
+
 	/* Report any MTE async fault before going to suspend */
 	mte_suspend_enter();
 
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index df14336c3..4a609e9b6 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -31,7 +31,7 @@ __do_compat_cache_op(unsigned long start, unsigned long end)
 		if (fatal_signal_pending(current))
 			return 0;
 
-		if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+		if (cpus_have_final_cap(ARM64_WORKAROUND_1542419)) {
 			/*
 			 * The workaround requires an inner-shareable tlbi.
 			 * We pick the reserved-ASID to minimise the impact.
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 817d788cd..1a2c72f3e 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -82,7 +82,12 @@ int __init parse_acpi_topology(void)
 #undef pr_fmt
 #define pr_fmt(fmt) "AMU: " fmt
 
-static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale);
+/*
+ * Ensure that amu_scale_freq_tick() will return SCHED_CAPACITY_SCALE until
+ * the CPU capacity and its associated frequency have been correctly
+ * initialized.
+ */
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale) =  1UL << (2 * SCHED_CAPACITY_SHIFT);
 static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
 static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
 static cpumask_var_t amu_fie_cpus;
@@ -112,14 +117,14 @@ static inline bool freq_counters_valid(int cpu)
 	return true;
 }
 
-static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
+void freq_inv_set_max_ratio(int cpu, u64 max_rate)
 {
-	u64 ratio;
+	u64 ratio, ref_rate = arch_timer_get_rate();
 
 	if (unlikely(!max_rate || !ref_rate)) {
-		pr_debug("CPU%d: invalid maximum or reference frequency.\n",
+		WARN_ONCE(1, "CPU%d: invalid maximum or reference frequency.\n",
 			 cpu);
-		return -EINVAL;
+		return;
 	}
 
 	/*
@@ -139,12 +144,10 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
 	ratio = div64_u64(ratio, max_rate);
 	if (!ratio) {
 		WARN_ONCE(1, "Reference frequency too low.\n");
-		return -EINVAL;
+		return;
 	}
 
-	per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio;
-
-	return 0;
+	WRITE_ONCE(per_cpu(arch_max_freq_scale, cpu), (unsigned long)ratio);
 }
 
 static void amu_scale_freq_tick(void)
@@ -195,10 +198,7 @@ static void amu_fie_setup(const struct cpumask *cpus)
 		return;
 
 	for_each_cpu(cpu, cpus) {
-		if (!freq_counters_valid(cpu) ||
-		    freq_inv_set_max_ratio(cpu,
-					   cpufreq_get_hw_max_freq(cpu) * 1000ULL,
-					   arch_timer_get_rate()))
+		if (!freq_counters_valid(cpu))
 			return;
 	}
 
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 8b70759cd..215e6d7f2 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -516,53 +516,7 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr)
 
 void do_el0_mops(struct pt_regs *regs, unsigned long esr)
 {
-	bool wrong_option = esr & ESR_ELx_MOPS_ISS_WRONG_OPTION;
-	bool option_a = esr & ESR_ELx_MOPS_ISS_OPTION_A;
-	int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr);
-	int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr);
-	int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr);
-	unsigned long dst, src, size;
-
-	dst = pt_regs_read_reg(regs, dstreg);
-	src = pt_regs_read_reg(regs, srcreg);
-	size = pt_regs_read_reg(regs, sizereg);
-
-	/*
-	 * Put the registers back in the original format suitable for a
-	 * prologue instruction, using the generic return routine from the
-	 * Arm ARM (DDI 0487I.a) rules CNTMJ and MWFQH.
-	 */
-	if (esr & ESR_ELx_MOPS_ISS_MEM_INST) {
-		/* SET* instruction */
-		if (option_a ^ wrong_option) {
-			/* Format is from Option A; forward set */
-			pt_regs_write_reg(regs, dstreg, dst + size);
-			pt_regs_write_reg(regs, sizereg, -size);
-		}
-	} else {
-		/* CPY* instruction */
-		if (!(option_a ^ wrong_option)) {
-			/* Format is from Option B */
-			if (regs->pstate & PSR_N_BIT) {
-				/* Backward copy */
-				pt_regs_write_reg(regs, dstreg, dst - size);
-				pt_regs_write_reg(regs, srcreg, src - size);
-			}
-		} else {
-			/* Format is from Option A */
-			if (size & BIT(63)) {
-				/* Forward copy */
-				pt_regs_write_reg(regs, dstreg, dst + size);
-				pt_regs_write_reg(regs, srcreg, src + size);
-				pt_regs_write_reg(regs, sizereg, -size);
-			}
-		}
-	}
-
-	if (esr & ESR_ELx_MOPS_ISS_FROM_EPILOGUE)
-		regs->pc -= 8;
-	else
-		regs->pc -= 4;
+	arm64_mops_reset_regs(&regs->user_regs, esr);
 
 	/*
 	 * If single stepping then finish the step before executing the
@@ -631,7 +585,7 @@ static void ctr_read_handler(unsigned long esr, struct pt_regs *regs)
 	int rt = ESR_ELx_SYS64_ISS_RT(esr);
 	unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
 
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+	if (cpus_have_final_cap(ARM64_WORKAROUND_1542419)) {
 		/* Hide DIC so that we can trap the unnecessary maintenance...*/
 		val &= ~BIT(CTR_EL0_DIC_SHIFT);
 
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index d9e135573..5562daf38 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -212,7 +212,7 @@ static int __setup_additional_pages(enum vdso_abi abi,
 	if (IS_ERR(ret))
 		goto up_fail;
 
-	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti())
+	if (system_supports_bti_kernel())
 		gp_flags = VM_ARM64_BTI;
 
 	vdso_base += VVAR_NR_PAGES * PAGE_SIZE;
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index fe7a53c67..8818287f1 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -78,13 +78,3 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
 # Actual build commands
 quiet_cmd_vdsold_and_vdso_check = LD      $@
       cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check)
-
-# Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 2f73e5bca..f5f80fdce 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -118,7 +118,7 @@ endif
 VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
 
 # Build rules
-targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw
+targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso32.so.dbg vdso.so.raw
 c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso))
 c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday))
 asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso))
@@ -127,15 +127,12 @@ obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso)
 targets += vdso.lds
 CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 
-include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE
-	$(call if_changed,vdsosym)
-
 # Strip rule for vdso.so
 $(obj)/vdso.so: OBJCOPYFLAGS := -S
-$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
+$(obj)/vdso.so: $(obj)/vdso32.so.dbg FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
+$(obj)/vdso32.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
 	$(call if_changed,vdsomunge)
 
 # Link rule for the .so file, .lds has to be first
@@ -166,19 +163,3 @@ quiet_cmd_vdsoas = AS32    $@
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(obj)/$(munge) $< $@
-
-# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO)
-gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
-quiet_cmd_vdsosym = VDSOSYM $@
-# The AArch64 nm should be able to read an AArch32 binary
-      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
-
-# Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL32 $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git a/arch/arm64/kernel/vdso32/vgettimeofday.c b/arch/arm64/kernel/vdso32/vgettimeofday.c
index 5acff29c5..29b4d8f61 100644
--- a/arch/arm64/kernel/vdso32/vgettimeofday.c
+++ b/arch/arm64/kernel/vdso32/vgettimeofday.c
@@ -5,6 +5,8 @@
  * Copyright (C) 2018 ARM Limited
  *
  */
+#define BUILD_VDSO32_64
+#include <vdso/gettime.h>
 
 int __vdso_clock_gettime(clockid_t clock,
 			 struct old_timespec32 *ts)
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index 83c1e09be..27ca89b62 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -3,7 +3,6 @@
 # KVM configuration
 #
 
-source "virt/lib/Kconfig"
 source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
@@ -21,16 +20,14 @@ if VIRTUALIZATION
 menuconfig KVM
 	bool "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
+	select KVM_COMMON
 	select KVM_GENERIC_HARDWARE_ENABLING
-	select MMU_NOTIFIER
-	select PREEMPT_NOTIFIERS
+	select KVM_GENERIC_MMU_NOTIFIER
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_XFER_TO_GUEST_WORK
 	select KVM_VFIO
-	select HAVE_KVM_EVENTFD
-	select HAVE_KVM_IRQFD
 	select HAVE_KVM_DIRTY_RING_ACQ_REL
 	select NEED_KVM_DIRTY_RING_WITH_BITMAP
 	select HAVE_KVM_MSI
@@ -41,7 +38,6 @@ menuconfig KVM
 	select HAVE_KVM_VCPU_RUN_PID_CHANGE
 	select SCHED_INFO
 	select GUEST_PERF_EVENTS if PERF_EVENTS
-	select INTERVAL_TREE
 	select XARRAY_MULTI
 	help
 	  Support hosting virtualized guest machines.
diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
index a1e24228a..9dec8c419 100644
--- a/arch/arm64/kvm/arch_timer.c
+++ b/arch/arm64/kvm/arch_timer.c
@@ -295,8 +295,7 @@ static u64 wfit_delay_ns(struct kvm_vcpu *vcpu)
 	u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
 	struct arch_timer_context *ctx;
 
-	ctx = (vcpu_has_nv(vcpu) && is_hyp_ctxt(vcpu)) ? vcpu_hvtimer(vcpu)
-						       : vcpu_vtimer(vcpu);
+	ctx = is_hyp_ctxt(vcpu) ? vcpu_hvtimer(vcpu) : vcpu_vtimer(vcpu);
 
 	return kvm_counter_compute_delta(ctx, val);
 }
@@ -453,7 +452,7 @@ static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
 				   timer_ctx->irq.level);
 
 	if (!userspace_irqchip(vcpu->kvm)) {
-		ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
+		ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu,
 					  timer_irq(timer_ctx),
 					  timer_ctx->irq.level,
 					  timer_ctx);
@@ -936,7 +935,7 @@ void kvm_timer_sync_user(struct kvm_vcpu *vcpu)
 		unmask_vtimer_irq_user(vcpu);
 }
 
-int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
+void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
 {
 	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
 	struct timer_map map;
@@ -980,8 +979,6 @@ int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
 		soft_timer_cancel(&map.emul_vtimer->hrtimer);
 	if (map.emul_ptimer)
 		soft_timer_cancel(&map.emul_ptimer->hrtimer);
-
-	return 0;
 }
 
 static void timer_context_init(struct kvm_vcpu *vcpu, int timerid)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 685cc4361..a25265aca 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -205,6 +205,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (is_protected_kvm_enabled())
 		pkvm_destroy_hyp_vm(kvm);
 
+	kfree(kvm->arch.mpidr_data);
 	kvm_destroy_vcpus(kvm);
 
 	kvm_unshare_hyp(kvm, kvm + 1);
@@ -220,7 +221,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = vgic_present;
 		break;
 	case KVM_CAP_IOEVENTFD:
-	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
 	case KVM_CAP_SYNC_MMU:
 	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
@@ -284,7 +284,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = kvm_arm_pvtime_supported();
 		break;
 	case KVM_CAP_ARM_EL1_32BIT:
-		r = cpus_have_const_cap(ARM64_HAS_32BIT_EL1);
+		r = cpus_have_final_cap(ARM64_HAS_32BIT_EL1);
 		break;
 	case KVM_CAP_GUEST_DEBUG_HW_BPS:
 		r = get_num_brps();
@@ -296,7 +296,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		r = kvm_arm_support_pmu_v3();
 		break;
 	case KVM_CAP_ARM_INJECT_SERROR_ESR:
-		r = cpus_have_const_cap(ARM64_HAS_RAS_EXTN);
+		r = cpus_have_final_cap(ARM64_HAS_RAS_EXTN);
 		break;
 	case KVM_CAP_ARM_VM_IPA_SIZE:
 		r = get_kvm_ipa_limit();
@@ -317,6 +317,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES:
 		r = kvm_supported_block_sizes();
 		break;
+	case KVM_CAP_ARM_SUPPORTED_REG_MASK_RANGES:
+		r = BIT(0);
+		break;
 	default:
 		r = 0;
 	}
@@ -367,7 +370,6 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 
 	/* Force users to call KVM_ARM_VCPU_INIT */
 	vcpu_clear_flag(vcpu, VCPU_INITIALIZED);
-	bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
 
 	vcpu->arch.mmu_page_cache.gfp_zero = __GFP_ZERO;
 
@@ -438,9 +440,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	 * We might get preempted before the vCPU actually runs, but
 	 * over-invalidation doesn't affect correctness.
 	 */
-	if (*last_ran != vcpu->vcpu_id) {
+	if (*last_ran != vcpu->vcpu_idx) {
 		kvm_call_hyp(__kvm_flush_cpu_context, mmu);
-		*last_ran = vcpu->vcpu_id;
+		*last_ran = vcpu->vcpu_idx;
 	}
 
 	vcpu->cpu = cpu;
@@ -448,7 +450,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	kvm_vgic_load(vcpu);
 	kvm_timer_vcpu_load(vcpu);
 	if (has_vhe())
-		kvm_vcpu_load_sysregs_vhe(vcpu);
+		kvm_vcpu_load_vhe(vcpu);
 	kvm_arch_vcpu_load_fp(vcpu);
 	kvm_vcpu_pmu_restore_guest(vcpu);
 	if (kvm_arm_is_pvtime_enabled(&vcpu->arch))
@@ -472,7 +474,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	kvm_arch_vcpu_put_debug_state_flags(vcpu);
 	kvm_arch_vcpu_put_fp(vcpu);
 	if (has_vhe())
-		kvm_vcpu_put_sysregs_vhe(vcpu);
+		kvm_vcpu_put_vhe(vcpu);
 	kvm_timer_vcpu_put(vcpu);
 	kvm_vgic_put(vcpu);
 	kvm_vcpu_pmu_restore_host(vcpu);
@@ -578,6 +580,57 @@ static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
 	return vcpu_get_flag(vcpu, VCPU_INITIALIZED);
 }
 
+static void kvm_init_mpidr_data(struct kvm *kvm)
+{
+	struct kvm_mpidr_data *data = NULL;
+	unsigned long c, mask, nr_entries;
+	u64 aff_set = 0, aff_clr = ~0UL;
+	struct kvm_vcpu *vcpu;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (kvm->arch.mpidr_data || atomic_read(&kvm->online_vcpus) == 1)
+		goto out;
+
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		u64 aff = kvm_vcpu_get_mpidr_aff(vcpu);
+		aff_set |= aff;
+		aff_clr &= aff;
+	}
+
+	/*
+	 * A significant bit can be either 0 or 1, and will only appear in
+	 * aff_set. Use aff_clr to weed out the useless stuff.
+	 */
+	mask = aff_set ^ aff_clr;
+	nr_entries = BIT_ULL(hweight_long(mask));
+
+	/*
+	 * Don't let userspace fool us. If we need more than a single page
+	 * to describe the compressed MPIDR array, just fall back to the
+	 * iterative method. Single vcpu VMs do not need this either.
+	 */
+	if (struct_size(data, cmpidr_to_idx, nr_entries) <= PAGE_SIZE)
+		data = kzalloc(struct_size(data, cmpidr_to_idx, nr_entries),
+			       GFP_KERNEL_ACCOUNT);
+
+	if (!data)
+		goto out;
+
+	data->mpidr_mask = mask;
+
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		u64 aff = kvm_vcpu_get_mpidr_aff(vcpu);
+		u16 index = kvm_mpidr_index(data, aff);
+
+		data->cmpidr_to_idx[index] = c;
+	}
+
+	kvm->arch.mpidr_data = data;
+out:
+	mutex_unlock(&kvm->arch.config_lock);
+}
+
 /*
  * Handle both the initialisation that is being done when the vcpu is
  * run for the first time, as well as the updates that must be
@@ -601,6 +654,8 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 	if (likely(vcpu_has_run_once(vcpu)))
 		return 0;
 
+	kvm_init_mpidr_data(kvm);
+
 	kvm_arm_vcpu_init_debug(vcpu);
 
 	if (likely(irqchip_in_kernel(kvm))) {
@@ -613,6 +668,12 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
 			return ret;
 	}
 
+	if (vcpu_has_nv(vcpu)) {
+		ret = kvm_init_nv_sysregs(vcpu->kvm);
+		if (ret)
+			return ret;
+	}
+
 	ret = kvm_timer_enable(vcpu);
 	if (ret)
 		return ret;
@@ -801,8 +862,7 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)
 		}
 
 		if (kvm_check_request(KVM_REQ_RELOAD_PMU, vcpu))
-			kvm_pmu_handle_pmcr(vcpu,
-					    __vcpu_sys_reg(vcpu, PMCR_EL0));
+			kvm_vcpu_reload_pmu(vcpu);
 
 		if (kvm_check_request(KVM_REQ_RESYNC_PMU_EL0, vcpu))
 			kvm_vcpu_pmu_restore_guest(vcpu);
@@ -950,7 +1010,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * making a thread's VMID inactive. So we need to call
 		 * kvm_arm_vmid_update() in non-premptible context.
 		 */
-		kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid);
+		if (kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid) &&
+		    has_vhe())
+			__load_stage2(vcpu->arch.hw_mmu,
+				      vcpu->arch.hw_mmu->arch);
 
 		kvm_pmu_flush_hwstate(vcpu);
 
@@ -1134,27 +1197,23 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
 			  bool line_status)
 {
 	u32 irq = irq_level->irq;
-	unsigned int irq_type, vcpu_idx, irq_num;
-	int nrcpus = atomic_read(&kvm->online_vcpus);
+	unsigned int irq_type, vcpu_id, irq_num;
 	struct kvm_vcpu *vcpu = NULL;
 	bool level = irq_level->level;
 
 	irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
-	vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
-	vcpu_idx += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1);
+	vcpu_id = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
+	vcpu_id += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1);
 	irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
 
-	trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
+	trace_kvm_irq_line(irq_type, vcpu_id, irq_num, irq_level->level);
 
 	switch (irq_type) {
 	case KVM_ARM_IRQ_TYPE_CPU:
 		if (irqchip_in_kernel(kvm))
 			return -ENXIO;
 
-		if (vcpu_idx >= nrcpus)
-			return -EINVAL;
-
-		vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+		vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id);
 		if (!vcpu)
 			return -EINVAL;
 
@@ -1166,17 +1225,14 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
 		if (!irqchip_in_kernel(kvm))
 			return -ENXIO;
 
-		if (vcpu_idx >= nrcpus)
-			return -EINVAL;
-
-		vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+		vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id);
 		if (!vcpu)
 			return -EINVAL;
 
 		if (irq_num < VGIC_NR_SGIS || irq_num >= VGIC_NR_PRIVATE_IRQS)
 			return -EINVAL;
 
-		return kvm_vgic_inject_irq(kvm, vcpu->vcpu_id, irq_num, level, NULL);
+		return kvm_vgic_inject_irq(kvm, vcpu, irq_num, level, NULL);
 	case KVM_ARM_IRQ_TYPE_SPI:
 		if (!irqchip_in_kernel(kvm))
 			return -ENXIO;
@@ -1184,12 +1240,36 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
 		if (irq_num < VGIC_NR_PRIVATE_IRQS)
 			return -EINVAL;
 
-		return kvm_vgic_inject_irq(kvm, 0, irq_num, level, NULL);
+		return kvm_vgic_inject_irq(kvm, NULL, irq_num, level, NULL);
 	}
 
 	return -EINVAL;
 }
 
+static unsigned long system_supported_vcpu_features(void)
+{
+	unsigned long features = KVM_VCPU_VALID_FEATURES;
+
+	if (!cpus_have_final_cap(ARM64_HAS_32BIT_EL1))
+		clear_bit(KVM_ARM_VCPU_EL1_32BIT, &features);
+
+	if (!kvm_arm_support_pmu_v3())
+		clear_bit(KVM_ARM_VCPU_PMU_V3, &features);
+
+	if (!system_supports_sve())
+		clear_bit(KVM_ARM_VCPU_SVE, &features);
+
+	if (!system_has_full_ptr_auth()) {
+		clear_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, &features);
+		clear_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, &features);
+	}
+
+	if (!cpus_have_final_cap(ARM64_HAS_NESTED_VIRT))
+		clear_bit(KVM_ARM_VCPU_HAS_EL2, &features);
+
+	return features;
+}
+
 static int kvm_vcpu_init_check_features(struct kvm_vcpu *vcpu,
 					const struct kvm_vcpu_init *init)
 {
@@ -1204,12 +1284,25 @@ static int kvm_vcpu_init_check_features(struct kvm_vcpu *vcpu,
 			return -ENOENT;
 	}
 
-	if (!test_bit(KVM_ARM_VCPU_EL1_32BIT, &features))
-		return 0;
+	if (features & ~system_supported_vcpu_features())
+		return -EINVAL;
+
+	/*
+	 * For now make sure that both address/generic pointer authentication
+	 * features are requested by the userspace together.
+	 */
+	if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, &features) !=
+	    test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, &features))
+		return -EINVAL;
 
-	if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1))
+	/* Disallow NV+SVE for the time being */
+	if (test_bit(KVM_ARM_VCPU_HAS_EL2, &features) &&
+	    test_bit(KVM_ARM_VCPU_SVE, &features))
 		return -EINVAL;
 
+	if (!test_bit(KVM_ARM_VCPU_EL1_32BIT, &features))
+		return 0;
+
 	/* MTE is incompatible with AArch32 */
 	if (kvm_has_mte(vcpu->kvm))
 		return -EINVAL;
@@ -1226,7 +1319,23 @@ static bool kvm_vcpu_init_changed(struct kvm_vcpu *vcpu,
 {
 	unsigned long features = init->features[0];
 
-	return !bitmap_equal(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES);
+	return !bitmap_equal(vcpu->kvm->arch.vcpu_features, &features,
+			     KVM_VCPU_MAX_FEATURES);
+}
+
+static int kvm_setup_vcpu(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	int ret = 0;
+
+	/*
+	 * When the vCPU has a PMU, but no PMU is set for the guest
+	 * yet, set the default one.
+	 */
+	if (kvm_vcpu_has_pmu(vcpu) && !kvm->arch.arm_pmu)
+		ret = kvm_arm_set_default_pmu(kvm);
+
+	return ret;
 }
 
 static int __kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
@@ -1239,21 +1348,21 @@ static int __kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 	mutex_lock(&kvm->arch.config_lock);
 
 	if (test_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags) &&
-	    !bitmap_equal(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES))
+	    kvm_vcpu_init_changed(vcpu, init))
 		goto out_unlock;
 
-	bitmap_copy(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES);
+	bitmap_copy(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES);
 
-	/* Now we know what it is, we can reset it. */
-	ret = kvm_reset_vcpu(vcpu);
-	if (ret) {
-		bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
+	ret = kvm_setup_vcpu(vcpu);
+	if (ret)
 		goto out_unlock;
-	}
 
-	bitmap_copy(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES);
+	/* Now we know what it is, we can reset it. */
+	kvm_reset_vcpu(vcpu);
+
 	set_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags);
 	vcpu_set_flag(vcpu, VCPU_INITIALIZED);
+	ret = 0;
 out_unlock:
 	mutex_unlock(&kvm->arch.config_lock);
 	return ret;
@@ -1278,7 +1387,8 @@ static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 	if (kvm_vcpu_init_changed(vcpu, init))
 		return -EINVAL;
 
-	return kvm_reset_vcpu(vcpu);
+	kvm_reset_vcpu(vcpu);
+	return 0;
 }
 
 static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
@@ -1629,6 +1739,13 @@ int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
 
 		return kvm_vm_set_attr(kvm, &attr);
 	}
+	case KVM_ARM_GET_REG_WRITABLE_MASKS: {
+		struct reg_mask_range range;
+
+		if (copy_from_user(&range, argp, sizeof(range)))
+			return -EFAULT;
+		return kvm_vm_ioctl_get_reg_writable_masks(kvm, &range);
+	}
 	default:
 		return -EINVAL;
 	}
@@ -1725,6 +1842,7 @@ static int kvm_init_vector_slots(void)
 static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 {
 	struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
+	u64 mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	unsigned long tcr;
 
 	/*
@@ -1747,6 +1865,10 @@ static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
 	}
 	tcr &= ~TCR_T0SZ_MASK;
 	tcr |= TCR_T0SZ(hyp_va_bits);
+	tcr &= ~TCR_EL2_PS_MASK;
+	tcr |= FIELD_PREP(TCR_EL2_PS_MASK, kvm_get_parange(mmfr0));
+	if (kvm_lpa2_is_enabled())
+		tcr |= TCR_EL2_DS;
 	params->tcr_el2 = tcr;
 
 	params->pgd_pa = kvm_mmu_get_httbr();
@@ -1777,7 +1899,7 @@ static void hyp_install_host_vector(void)
 	 * Call initialization code, and switch to the full blown HYP code.
 	 * If the cpucaps haven't been finalized yet, something has gone very
 	 * wrong, and hyp will crash and burn when it uses any
-	 * cpus_have_const_cap() wrapper.
+	 * cpus_have_*_cap() wrapper.
 	 */
 	BUG_ON(!system_capabilities_finalized());
 	params = this_cpu_ptr_nvhe_sym(kvm_init_params);
@@ -2310,7 +2432,7 @@ static int __init init_hyp_mode(void)
 
 	if (is_protected_kvm_enabled()) {
 		if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL) &&
-		    cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH))
+		    cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH))
 			pkvm_hyp_init_ptrauth();
 
 		init_cpu_logical_map();
@@ -2341,6 +2463,18 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
 	unsigned long i;
 
 	mpidr &= MPIDR_HWID_BITMASK;
+
+	if (kvm->arch.mpidr_data) {
+		u16 idx = kvm_mpidr_index(kvm->arch.mpidr_data, mpidr);
+
+		vcpu = kvm_get_vcpu(kvm,
+				    kvm->arch.mpidr_data->cmpidr_to_idx[idx]);
+		if (mpidr != kvm_vcpu_get_mpidr_aff(vcpu))
+			vcpu = NULL;
+
+		return vcpu;
+	}
+
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu))
 			return vcpu;
diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c
index ee902ff2a..431fd4299 100644
--- a/arch/arm64/kvm/emulate-nested.c
+++ b/arch/arm64/kvm/emulate-nested.c
@@ -648,15 +648,80 @@ static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
 	SR_TRAP(SYS_APGAKEYLO_EL1,	CGT_HCR_APK),
 	SR_TRAP(SYS_APGAKEYHI_EL1,	CGT_HCR_APK),
 	/* All _EL2 registers */
-	SR_RANGE_TRAP(sys_reg(3, 4, 0, 0, 0),
-		      sys_reg(3, 4, 3, 15, 7), CGT_HCR_NV),
+	SR_TRAP(SYS_BRBCR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_VPIDR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_VMPIDR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_SCTLR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_ACTLR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_SCTLR2_EL2,		CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_HCR_EL2,
+		      SYS_HCRX_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_SMPRIMAP_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_SMCR_EL2,		CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_TTBR0_EL2,
+		      SYS_TCR2_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_VTTBR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_VTCR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_VNCR_EL2,		CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_HDFGRTR_EL2,
+		      SYS_HAFGRTR_EL2,	CGT_HCR_NV),
 	/* Skip the SP_EL1 encoding... */
 	SR_TRAP(SYS_SPSR_EL2,		CGT_HCR_NV),
 	SR_TRAP(SYS_ELR_EL2,		CGT_HCR_NV),
-	SR_RANGE_TRAP(sys_reg(3, 4, 4, 1, 1),
-		      sys_reg(3, 4, 10, 15, 7), CGT_HCR_NV),
-	SR_RANGE_TRAP(sys_reg(3, 4, 12, 0, 0),
-		      sys_reg(3, 4, 14, 15, 7), CGT_HCR_NV),
+	/* Skip SPSR_irq, SPSR_abt, SPSR_und, SPSR_fiq */
+	SR_TRAP(SYS_AFSR0_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_AFSR1_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_ESR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_VSESR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_TFSR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_FAR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_HPFAR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_PMSCR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_MAIR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_AMAIR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_MPAMHCR_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_MPAMVPMV_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_MPAM2_EL2,		CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_MPAMVPM0_EL2,
+		      SYS_MPAMVPM7_EL2,	CGT_HCR_NV),
+	/*
+	 * Note that the spec. describes a group of MEC registers
+	 * whose access should not trap, therefore skip the following:
+	 * MECID_A0_EL2, MECID_A1_EL2, MECID_P0_EL2,
+	 * MECID_P1_EL2, MECIDR_EL2, VMECID_A_EL2,
+	 * VMECID_P_EL2.
+	 */
+	SR_RANGE_TRAP(SYS_VBAR_EL2,
+		      SYS_RMR_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_VDISR_EL2,		CGT_HCR_NV),
+	/* ICH_AP0R<m>_EL2 */
+	SR_RANGE_TRAP(SYS_ICH_AP0R0_EL2,
+		      SYS_ICH_AP0R3_EL2, CGT_HCR_NV),
+	/* ICH_AP1R<m>_EL2 */
+	SR_RANGE_TRAP(SYS_ICH_AP1R0_EL2,
+		      SYS_ICH_AP1R3_EL2, CGT_HCR_NV),
+	SR_TRAP(SYS_ICC_SRE_EL2,	CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_ICH_HCR_EL2,
+		      SYS_ICH_EISR_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_ICH_ELRSR_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_ICH_VMCR_EL2,	CGT_HCR_NV),
+	/* ICH_LR<m>_EL2 */
+	SR_RANGE_TRAP(SYS_ICH_LR0_EL2,
+		      SYS_ICH_LR15_EL2, CGT_HCR_NV),
+	SR_TRAP(SYS_CONTEXTIDR_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_TPIDR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_SCXTNUM_EL2,	CGT_HCR_NV),
+	/* AMEVCNTVOFF0<n>_EL2, AMEVCNTVOFF1<n>_EL2  */
+	SR_RANGE_TRAP(SYS_AMEVCNTVOFF0n_EL2(0),
+		      SYS_AMEVCNTVOFF1n_EL2(15), CGT_HCR_NV),
+	/* CNT*_EL2 */
+	SR_TRAP(SYS_CNTVOFF_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_CNTPOFF_EL2,	CGT_HCR_NV),
+	SR_TRAP(SYS_CNTHCTL_EL2,	CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_CNTHP_TVAL_EL2,
+		      SYS_CNTHP_CVAL_EL2, CGT_HCR_NV),
+	SR_RANGE_TRAP(SYS_CNTHV_TVAL_EL2,
+		      SYS_CNTHV_CVAL_EL2, CGT_HCR_NV),
 	/* All _EL02, _EL12 registers */
 	SR_RANGE_TRAP(sys_reg(3, 5, 0, 0, 0),
 		      sys_reg(3, 5, 10, 15, 7), CGT_HCR_NV),
@@ -947,6 +1012,7 @@ enum fgt_group_id {
 	HDFGRTR_GROUP,
 	HDFGWTR_GROUP,
 	HFGITR_GROUP,
+	HAFGRTR_GROUP,
 
 	/* Must be last */
 	__NR_FGT_GROUP_IDS__
@@ -977,10 +1043,20 @@ enum fg_filter_id {
 
 static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	/* HFGRTR_EL2, HFGWTR_EL2 */
+	SR_FGT(SYS_AMAIR2_EL1,		HFGxTR, nAMAIR2_EL1, 0),
+	SR_FGT(SYS_MAIR2_EL1,		HFGxTR, nMAIR2_EL1, 0),
+	SR_FGT(SYS_S2POR_EL1,		HFGxTR, nS2POR_EL1, 0),
+	SR_FGT(SYS_POR_EL1,		HFGxTR, nPOR_EL1, 0),
+	SR_FGT(SYS_POR_EL0,		HFGxTR, nPOR_EL0, 0),
 	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
 	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_RCWMASK_EL1,		HFGxTR, nRCWMASK_EL1, 0),
 	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
 	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_GCSCR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSPR_EL1,		HFGxTR, nGCS_EL1, 0),
+	SR_FGT(SYS_GCSCRE0_EL1,		HFGxTR, nGCS_EL0, 0),
+	SR_FGT(SYS_GCSPR_EL0,		HFGxTR, nGCS_EL0, 0),
 	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
 	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
 	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
@@ -1042,6 +1118,11 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
 	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
 	/* HFGITR_EL2 */
+	SR_FGT(OP_AT_S1E1A, 		HFGITR, ATS1E1A, 1),
+	SR_FGT(OP_COSP_RCTX, 		HFGITR, COSPRCTX, 1),
+	SR_FGT(OP_GCSPUSHX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPOPX, 		HFGITR, nGCSEPP, 0),
+	SR_FGT(OP_GCSPUSHM, 		HFGITR, nGCSPUSHM_EL1, 0),
 	SR_FGT(OP_BRB_IALL, 		HFGITR, nBRBIALL, 0),
 	SR_FGT(OP_BRB_INJ, 		HFGITR, nBRBINJ, 0),
 	SR_FGT(SYS_DC_CVAC, 		HFGITR, DCCVAC, 1),
@@ -1609,6 +1690,49 @@ static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
 	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
 	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
 	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+	/*
+	 * HAFGRTR_EL2
+	 */
+	SR_FGT(SYS_AMEVTYPER1_EL0(15),	HAFGRTR, AMEVTYPER115_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(14),	HAFGRTR, AMEVTYPER114_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(13),	HAFGRTR, AMEVTYPER113_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(12),	HAFGRTR, AMEVTYPER112_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(11),	HAFGRTR, AMEVTYPER111_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(10),	HAFGRTR, AMEVTYPER110_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(9),	HAFGRTR, AMEVTYPER19_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(8),	HAFGRTR, AMEVTYPER18_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(7),	HAFGRTR, AMEVTYPER17_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(6),	HAFGRTR, AMEVTYPER16_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(5),	HAFGRTR, AMEVTYPER15_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(4),	HAFGRTR, AMEVTYPER14_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(3),	HAFGRTR, AMEVTYPER13_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(2),	HAFGRTR, AMEVTYPER12_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(1),	HAFGRTR, AMEVTYPER11_EL0, 1),
+	SR_FGT(SYS_AMEVTYPER1_EL0(0),	HAFGRTR, AMEVTYPER10_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(15),	HAFGRTR, AMEVCNTR115_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(14),	HAFGRTR, AMEVCNTR114_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(13),	HAFGRTR, AMEVCNTR113_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(12),	HAFGRTR, AMEVCNTR112_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(11),	HAFGRTR, AMEVCNTR111_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(10),	HAFGRTR, AMEVCNTR110_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(9),	HAFGRTR, AMEVCNTR19_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(8),	HAFGRTR, AMEVCNTR18_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(7),	HAFGRTR, AMEVCNTR17_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(6),	HAFGRTR, AMEVCNTR16_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(5),	HAFGRTR, AMEVCNTR15_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(4),	HAFGRTR, AMEVCNTR14_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(3),	HAFGRTR, AMEVCNTR13_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(2),	HAFGRTR, AMEVCNTR12_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(1),	HAFGRTR, AMEVCNTR11_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR1_EL0(0),	HAFGRTR, AMEVCNTR10_EL0, 1),
+	SR_FGT(SYS_AMCNTENCLR1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENSET1_EL0,	HAFGRTR, AMCNTEN1, 1),
+	SR_FGT(SYS_AMCNTENCLR0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMCNTENSET0_EL0,	HAFGRTR, AMCNTEN0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(3),	HAFGRTR, AMEVCNTR03_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(2),	HAFGRTR, AMEVCNTR02_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(1),	HAFGRTR, AMEVCNTR01_EL0, 1),
+	SR_FGT(SYS_AMEVCNTR0_EL0(0),	HAFGRTR, AMEVCNTR00_EL0, 1),
 };
 
 static union trap_config get_trap_config(u32 sysreg)
@@ -1829,6 +1953,10 @@ bool __check_nv_sr_forward(struct kvm_vcpu *vcpu)
 			val = sanitised_sys_reg(vcpu, HDFGWTR_EL2);
 		break;
 
+	case HAFGRTR_GROUP:
+		val = sanitised_sys_reg(vcpu, HAFGRTR_EL2);
+		break;
+
 	case HFGITR_GROUP:
 		val = sanitised_sys_reg(vcpu, HFGITR_EL2);
 		switch (tc.fgf) {
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index a1710e5fa..aaf1d4939 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -815,7 +815,7 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
 			      struct kvm_vcpu_events *events)
 {
 	events->exception.serror_pending = !!(vcpu->arch.hcr_el2 & HCR_VSE);
-	events->exception.serror_has_esr = cpus_have_const_cap(ARM64_HAS_RAS_EXTN);
+	events->exception.serror_has_esr = cpus_have_final_cap(ARM64_HAS_RAS_EXTN);
 
 	if (events->exception.serror_pending && events->exception.serror_has_esr)
 		events->exception.serror_esr = vcpu_get_vsesr(vcpu);
@@ -837,7 +837,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 	bool ext_dabt_pending = events->exception.ext_dabt_pending;
 
 	if (serror_pending && has_esr) {
-		if (!cpus_have_const_cap(ARM64_HAS_RAS_EXTN))
+		if (!cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
 			return -EINVAL;
 
 		if (!((events->exception.serror_esr) & ~ESR_ELx_ISS_MASK))
diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h
index 9ddcfe2c3..9e13c1bc2 100644
--- a/arch/arm64/kvm/hyp/include/hyp/fault.h
+++ b/arch/arm64/kvm/hyp/include/hyp/fault.h
@@ -60,7 +60,7 @@ static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
 	 */
 	if (!(esr & ESR_ELx_S1PTW) &&
 	    (cpus_have_final_cap(ARM64_WORKAROUND_834220) ||
-	     (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) {
+	     esr_fsc_is_permission_fault(esr))) {
 		if (!__translate_far_to_hpfar(far, &hpfar))
 			return false;
 	} else {
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index 9cfe6bd1d..a038320cd 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -30,6 +30,7 @@
 #include <asm/fpsimd.h>
 #include <asm/debug-monitors.h>
 #include <asm/processor.h>
+#include <asm/traps.h>
 
 struct kvm_exception_table_entry {
 	int insn, fixup;
@@ -78,6 +79,45 @@ static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
 		clr |= ~hfg & __ ## reg ## _nMASK; 			\
 	} while(0)
 
+#define update_fgt_traps_cs(vcpu, reg, clr, set)			\
+	do {								\
+		struct kvm_cpu_context *hctxt =				\
+			&this_cpu_ptr(&kvm_host_data)->host_ctxt;	\
+		u64 c = 0, s = 0;					\
+									\
+		ctxt_sys_reg(hctxt, reg) = read_sysreg_s(SYS_ ## reg);	\
+		compute_clr_set(vcpu, reg, c, s);			\
+		s |= set;						\
+		c |= clr;						\
+		if (c || s) {						\
+			u64 val = __ ## reg ## _nMASK;			\
+			val |= s;					\
+			val &= ~c;					\
+			write_sysreg_s(val, SYS_ ## reg);		\
+		}							\
+	} while(0)
+
+#define update_fgt_traps(vcpu, reg)		\
+	update_fgt_traps_cs(vcpu, reg, 0, 0)
+
+/*
+ * Validate the fine grain trap masks.
+ * Check that the masks do not overlap and that all bits are accounted for.
+ */
+#define CHECK_FGT_MASKS(reg)							\
+	do {									\
+		BUILD_BUG_ON((__ ## reg ## _MASK) & (__ ## reg ## _nMASK));	\
+		BUILD_BUG_ON(~((__ ## reg ## _RES0) ^ (__ ## reg ## _MASK) ^	\
+			       (__ ## reg ## _nMASK)));				\
+	} while(0)
+
+static inline bool cpu_has_amu(void)
+{
+       u64 pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+
+       return cpuid_feature_extract_unsigned_field(pfr0,
+               ID_AA64PFR0_EL1_AMU_SHIFT);
+}
 
 static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 {
@@ -85,6 +125,14 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	u64 r_clr = 0, w_clr = 0, r_set = 0, w_set = 0, tmp;
 	u64 r_val, w_val;
 
+	CHECK_FGT_MASKS(HFGRTR_EL2);
+	CHECK_FGT_MASKS(HFGWTR_EL2);
+	CHECK_FGT_MASKS(HFGITR_EL2);
+	CHECK_FGT_MASKS(HDFGRTR_EL2);
+	CHECK_FGT_MASKS(HDFGWTR_EL2);
+	CHECK_FGT_MASKS(HAFGRTR_EL2);
+	CHECK_FGT_MASKS(HCRX_EL2);
+
 	if (!cpus_have_final_cap(ARM64_HAS_FGT))
 		return;
 
@@ -109,12 +157,15 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 		compute_clr_set(vcpu, HFGWTR_EL2, w_clr, w_set);
 	}
 
-	/* The default is not to trap anything but ACCDATA_EL1 */
-	r_val = __HFGRTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	/* The default to trap everything not handled or supported in KVM. */
+	tmp = HFGxTR_EL2_nAMAIR2_EL1 | HFGxTR_EL2_nMAIR2_EL1 | HFGxTR_EL2_nS2POR_EL1 |
+	      HFGxTR_EL2_nPOR_EL1 | HFGxTR_EL2_nPOR_EL0 | HFGxTR_EL2_nACCDATA_EL1;
+
+	r_val = __HFGRTR_EL2_nMASK & ~tmp;
 	r_val |= r_set;
 	r_val &= ~r_clr;
 
-	w_val = __HFGWTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	w_val = __HFGWTR_EL2_nMASK & ~tmp;
 	w_val |= w_set;
 	w_val &= ~w_clr;
 
@@ -124,34 +175,12 @@ static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
 		return;
 
-	ctxt_sys_reg(hctxt, HFGITR_EL2) = read_sysreg_s(SYS_HFGITR_EL2);
-
-	r_set = r_clr = 0;
-	compute_clr_set(vcpu, HFGITR_EL2, r_clr, r_set);
-	r_val = __HFGITR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	write_sysreg_s(r_val, SYS_HFGITR_EL2);
-
-	ctxt_sys_reg(hctxt, HDFGRTR_EL2) = read_sysreg_s(SYS_HDFGRTR_EL2);
-	ctxt_sys_reg(hctxt, HDFGWTR_EL2) = read_sysreg_s(SYS_HDFGWTR_EL2);
+	update_fgt_traps(vcpu, HFGITR_EL2);
+	update_fgt_traps(vcpu, HDFGRTR_EL2);
+	update_fgt_traps(vcpu, HDFGWTR_EL2);
 
-	r_clr = r_set = w_clr = w_set = 0;
-
-	compute_clr_set(vcpu, HDFGRTR_EL2, r_clr, r_set);
-	compute_clr_set(vcpu, HDFGWTR_EL2, w_clr, w_set);
-
-	r_val = __HDFGRTR_EL2_nMASK;
-	r_val |= r_set;
-	r_val &= ~r_clr;
-
-	w_val = __HDFGWTR_EL2_nMASK;
-	w_val |= w_set;
-	w_val &= ~w_clr;
-
-	write_sysreg_s(r_val, SYS_HDFGRTR_EL2);
-	write_sysreg_s(w_val, SYS_HDFGWTR_EL2);
+	if (cpu_has_amu())
+		update_fgt_traps(vcpu, HAFGRTR_EL2);
 }
 
 static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
@@ -170,6 +199,9 @@ static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
 	write_sysreg_s(ctxt_sys_reg(hctxt, HFGITR_EL2), SYS_HFGITR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGRTR_EL2), SYS_HDFGRTR_EL2);
 	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGWTR_EL2), SYS_HDFGWTR_EL2);
+
+	if (cpu_has_amu())
+		write_sysreg_s(ctxt_sys_reg(hctxt, HAFGRTR_EL2), SYS_HAFGRTR_EL2);
 }
 
 static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
@@ -265,6 +297,22 @@ static inline bool __populate_fault_info(struct kvm_vcpu *vcpu)
 	return __get_fault_info(vcpu->arch.fault.esr_el2, &vcpu->arch.fault);
 }
 
+static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
+	arm64_mops_reset_regs(vcpu_gp_regs(vcpu), vcpu->arch.fault.esr_el2);
+	write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
+
+	/*
+	 * Finish potential single step before executing the prologue
+	 * instruction.
+	 */
+	*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+	write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
+
+	return true;
+}
+
 static inline void __hyp_sve_restore_guest(struct kvm_vcpu *vcpu)
 {
 	sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1, SYS_ZCR_EL2);
@@ -574,7 +622,7 @@ static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
 		bool valid;
 
-		valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT &&
+		valid = kvm_vcpu_trap_is_translation_fault(vcpu) &&
 			kvm_vcpu_dabt_isvalid(vcpu) &&
 			!kvm_vcpu_abt_issea(vcpu) &&
 			!kvm_vcpu_abt_iss1tw(vcpu);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index 37440e1dd..51f043649 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -69,6 +69,8 @@
 	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \
 	)
 
+#define PVM_ID_AA64PFR2_ALLOW 0ULL
+
 /*
  * Allow for protected VMs:
  * - Mixed-endian
@@ -101,6 +103,7 @@
  * - Privileged Access Never
  * - SError interrupt exceptions from speculative reads
  * - Enhanced Translation Synchronization
+ * - Control for cache maintenance permission
  */
 #define PVM_ID_AA64MMFR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \
@@ -108,7 +111,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \
 	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \
-	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_CMOW) \
 	)
 
 /*
@@ -133,6 +137,8 @@
 	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \
 	)
 
+#define PVM_ID_AA64MMFR3_ALLOW (0ULL)
+
 /*
  * No support for Scalable Vectors for protected VMs:
  *	Requires additional support from KVM, e.g., context-switching and
@@ -178,10 +184,18 @@
 	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \
 	)
 
+/* Restrict pointer authentication to the basic version. */
+#define PVM_ID_AA64ISAR1_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA), ID_AA64ISAR1_EL1_APA_PAuth) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API), ID_AA64ISAR1_EL1_API_PAuth) \
+	)
+
+#define PVM_ID_AA64ISAR2_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3), ID_AA64ISAR2_EL1_APA3_PAuth) \
+	)
+
 #define PVM_ID_AA64ISAR1_ALLOW (\
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
@@ -196,8 +210,9 @@
 	)
 
 #define PVM_ID_AA64ISAR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_ATS1A)| \
 	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
-	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) \
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS) \
 	)
 
 u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
index fe5472a18..97c527ef5 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/gfp.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -16,7 +16,7 @@ struct hyp_pool {
 	 * API at EL2.
 	 */
 	hyp_spinlock_t lock;
-	struct list_head free_area[MAX_ORDER + 1];
+	struct list_head free_area[NR_PAGE_ORDERS];
 	phys_addr_t range_start;
 	phys_addr_t range_end;
 	unsigned short max_order;
diff --git a/arch/arm64/kvm/hyp/nvhe/ffa.c b/arch/arm64/kvm/hyp/nvhe/ffa.c
index 6e4dba9ea..320f2eaa1 100644
--- a/arch/arm64/kvm/hyp/nvhe/ffa.c
+++ b/arch/arm64/kvm/hyp/nvhe/ffa.c
@@ -423,6 +423,7 @@ static __always_inline void do_ffa_mem_xfer(const u64 func_id,
 	DECLARE_REG(u32, fraglen, ctxt, 2);
 	DECLARE_REG(u64, addr_mbz, ctxt, 3);
 	DECLARE_REG(u32, npages_mbz, ctxt, 4);
+	struct ffa_mem_region_attributes *ep_mem_access;
 	struct ffa_composite_mem_region *reg;
 	struct ffa_mem_region *buf;
 	u32 offset, nr_ranges;
@@ -452,7 +453,9 @@ static __always_inline void do_ffa_mem_xfer(const u64 func_id,
 	buf = hyp_buffers.tx;
 	memcpy(buf, host_buffers.tx, fraglen);
 
-	offset = buf->ep_mem_access[0].composite_off;
+	ep_mem_access = (void *)buf +
+			ffa_mem_desc_offset(buf, 0, FFA_VERSION_1_0);
+	offset = ep_mem_access->composite_off;
 	if (!offset || buf->ep_count != 1 || buf->sender_id != HOST_FFA_ID) {
 		ret = FFA_RET_INVALID_PARAMETERS;
 		goto out_unlock;
@@ -504,6 +507,7 @@ static void do_ffa_mem_reclaim(struct arm_smccc_res *res,
 	DECLARE_REG(u32, handle_lo, ctxt, 1);
 	DECLARE_REG(u32, handle_hi, ctxt, 2);
 	DECLARE_REG(u32, flags, ctxt, 3);
+	struct ffa_mem_region_attributes *ep_mem_access;
 	struct ffa_composite_mem_region *reg;
 	u32 offset, len, fraglen, fragoff;
 	struct ffa_mem_region *buf;
@@ -528,7 +532,9 @@ static void do_ffa_mem_reclaim(struct arm_smccc_res *res,
 	len = res->a1;
 	fraglen = res->a2;
 
-	offset = buf->ep_mem_access[0].composite_off;
+	ep_mem_access = (void *)buf +
+			ffa_mem_desc_offset(buf, 0, FFA_VERSION_1_0);
+	offset = ep_mem_access->composite_off;
 	/*
 	 * We can trust the SPMD to get this right, but let's at least
 	 * check that we end up with something that doesn't look _completely_
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
index 1cc06e679..2994878d6 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-init.S
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -122,11 +122,7 @@ alternative_if ARM64_HAS_CNP
 alternative_else_nop_endif
 	msr	ttbr0_el2, x2
 
-	/*
-	 * Set the PS bits in TCR_EL2.
-	 */
 	ldr	x0, [x0, #NVHE_INIT_TCR_EL2]
-	tcr_compute_pa_size x0, #TCR_EL2_PS_SHIFT, x1, x2
 	msr	tcr_el2, x0
 
 	isb
@@ -292,6 +288,8 @@ alternative_else_nop_endif
 	mov	sp, x0
 
 	/* And turn the MMU back on! */
+	dsb	nsh
+	isb
 	set_sctlr_el2	x2
 	ret	x1
 SYM_FUNC_END(__pkvm_init_switch_pgd)
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index 9d7034412..861c76021 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -91,7 +91,7 @@ static void host_s2_put_page(void *addr)
 	hyp_put_page(&host_s2_pool, addr);
 }
 
-static void host_s2_free_unlinked_table(void *addr, u32 level)
+static void host_s2_free_unlinked_table(void *addr, s8 level)
 {
 	kvm_pgtable_stage2_free_unlinked(&host_mmu.mm_ops, addr, level);
 }
@@ -129,8 +129,8 @@ static void prepare_host_vtcr(void)
 	parange = kvm_get_parange(id_aa64mmfr0_el1_sys_val);
 	phys_shift = id_aa64mmfr0_parange_to_phys_shift(parange);
 
-	host_mmu.arch.vtcr = kvm_get_vtcr(id_aa64mmfr0_el1_sys_val,
-					  id_aa64mmfr1_el1_sys_val, phys_shift);
+	host_mmu.arch.mmu.vtcr = kvm_get_vtcr(id_aa64mmfr0_el1_sys_val,
+					      id_aa64mmfr1_el1_sys_val, phys_shift);
 }
 
 static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot);
@@ -235,7 +235,7 @@ int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
 	unsigned long nr_pages;
 	int ret;
 
-	nr_pages = kvm_pgtable_stage2_pgd_size(vm->kvm.arch.vtcr) >> PAGE_SHIFT;
+	nr_pages = kvm_pgtable_stage2_pgd_size(mmu->vtcr) >> PAGE_SHIFT;
 	ret = hyp_pool_init(&vm->pool, hyp_virt_to_pfn(pgd), nr_pages, 0);
 	if (ret)
 		return ret;
@@ -295,7 +295,7 @@ int __pkvm_prot_finalize(void)
 		return -EPERM;
 
 	params->vttbr = kvm_get_vttbr(mmu);
-	params->vtcr = host_mmu.arch.vtcr;
+	params->vtcr = mmu->vtcr;
 	params->hcr_el2 |= HCR_VM;
 
 	/*
@@ -443,7 +443,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 {
 	struct kvm_mem_range cur;
 	kvm_pte_t pte;
-	u32 level;
+	s8 level;
 	int ret;
 
 	hyp_assert_lock_held(&host_mmu.lock);
@@ -462,7 +462,7 @@ static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
 		cur.start = ALIGN_DOWN(addr, granule);
 		cur.end = cur.start + granule;
 		level++;
-	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
+	} while ((level <= KVM_PGTABLE_LAST_LEVEL) &&
 			!(kvm_level_supports_block_mapping(level) &&
 			  range_included(&cur, range)));
 
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
index 65a7a186d..b01a3d107 100644
--- a/arch/arm64/kvm/hyp/nvhe/mm.c
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -260,7 +260,7 @@ static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
 	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
 	 */
 	dsb(ishst);
-	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), (KVM_PGTABLE_MAX_LEVELS - 1));
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), KVM_PGTABLE_LAST_LEVEL);
 	dsb(ish);
 	isb();
 }
@@ -275,7 +275,7 @@ static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
 
-	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_MAX_LEVELS - 1)
+	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	slot->addr = ctx->addr;
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index b1e392186..e691290d3 100644
--- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -228,7 +228,8 @@ int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
 	int i;
 
 	hyp_spin_lock_init(&pool->lock);
-	pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT));
+	pool->max_order = min(MAX_PAGE_ORDER,
+			      get_order(nr_pages << PAGE_SHIFT));
 	for (i = 0; i <= pool->max_order; i++)
 		INIT_LIST_HEAD(&pool->free_area[i]);
 	pool->range_start = phys;
diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c
index 8033ef353..26dd9a20a 100644
--- a/arch/arm64/kvm/hyp/nvhe/pkvm.c
+++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -12,7 +12,7 @@
 #include <nvhe/pkvm.h>
 #include <nvhe/trap_handler.h>
 
-/* Used by icache_is_vpipt(). */
+/* Used by icache_is_aliasing(). */
 unsigned long __icache_flags;
 
 /* Used by kvm_get_vttbr(). */
@@ -136,6 +136,10 @@ static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu)
 			cptr_set |= CPTR_EL2_TTA;
 	}
 
+	/* Trap External Trace */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_ExtTrcBuff), feature_ids))
+		mdcr_clear |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT;
+
 	vcpu->arch.mdcr_el2 |= mdcr_set;
 	vcpu->arch.mdcr_el2 &= ~mdcr_clear;
 	vcpu->arch.cptr_el2 |= cptr_set;
@@ -303,7 +307,7 @@ static void init_pkvm_hyp_vm(struct kvm *host_kvm, struct pkvm_hyp_vm *hyp_vm,
 {
 	hyp_vm->host_kvm = host_kvm;
 	hyp_vm->kvm.created_vcpus = nr_vcpus;
-	hyp_vm->kvm.arch.vtcr = host_mmu.arch.vtcr;
+	hyp_vm->kvm.arch.mmu.vtcr = host_mmu.arch.mmu.vtcr;
 }
 
 static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu,
@@ -483,7 +487,7 @@ int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
 	}
 
 	vm_size = pkvm_get_hyp_vm_size(nr_vcpus);
-	pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.vtcr);
+	pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.mmu.vtcr);
 
 	ret = -ENOMEM;
 
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
index 0d5e0a89d..bc58d1b51 100644
--- a/arch/arm64/kvm/hyp/nvhe/setup.c
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -181,7 +181,7 @@ static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (!kvm_pte_valid(ctx->old))
 		return 0;
 
-	if (ctx->level != (KVM_PGTABLE_MAX_LEVELS - 1))
+	if (ctx->level != KVM_PGTABLE_LAST_LEVEL)
 		return -EINVAL;
 
 	phys = kvm_pte_to_phys(ctx->old);
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
index c353a06ee..c50f8459e 100644
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -192,6 +192,7 @@ static const exit_handler_fn hyp_exit_handlers[] = {
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
 	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+	[ESR_ELx_EC_MOPS]		= kvm_hyp_handle_mops,
 };
 
 static const exit_handler_fn pvm_exit_handlers[] = {
@@ -203,6 +204,7 @@ static const exit_handler_fn pvm_exit_handlers[] = {
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
 	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+	[ESR_ELx_EC_MOPS]		= kvm_hyp_handle_mops,
 };
 
 static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c
index 1b265713d..2fc68da40 100644
--- a/arch/arm64/kvm/hyp/nvhe/tlb.c
+++ b/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -105,28 +105,6 @@ void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
 	dsb(ish);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -157,28 +135,6 @@ void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
 	dsb(nsh);
 	isb();
 
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -198,17 +154,14 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
 	/* Switch to requested VMID */
 	__tlb_switch_to_guest(mmu, &cxt, false);
 
-	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0);
+	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride,
+				TLBI_TTL_UNKNOWN);
 
 	dsb(ish);
 	__tlbi(vmalle1is);
 	dsb(ish);
 	isb();
 
-	/* See the comment in __kvm_tlb_flush_vmid_ipa() */
-	if (icache_is_vpipt())
-		icache_inval_all_pou();
-
 	__tlb_switch_to_host(&cxt);
 }
 
@@ -246,18 +199,5 @@ void __kvm_flush_vm_context(void)
 	/* Same remark as in __tlb_switch_to_guest() */
 	dsb(ish);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index f155b8c9e..ce5cef7d7 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -79,7 +79,10 @@ static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx)
 
 static bool kvm_phys_is_valid(u64 phys)
 {
-	return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX));
+	u64 parange_max = kvm_get_parange_max();
+	u8 shift = id_aa64mmfr0_parange_to_phys_shift(parange_max);
+
+	return phys < BIT(shift);
 }
 
 static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys)
@@ -98,7 +101,7 @@ static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx,
 	return IS_ALIGNED(ctx->addr, granule);
 }
 
-static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, u32 level)
+static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, s8 level)
 {
 	u64 shift = kvm_granule_shift(level);
 	u64 mask = BIT(PAGE_SHIFT - 3) - 1;
@@ -114,7 +117,7 @@ static u32 kvm_pgd_page_idx(struct kvm_pgtable *pgt, u64 addr)
 	return (addr & mask) >> shift;
 }
 
-static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
+static u32 kvm_pgd_pages(u32 ia_bits, s8 start_level)
 {
 	struct kvm_pgtable pgt = {
 		.ia_bits	= ia_bits,
@@ -124,9 +127,9 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
 	return kvm_pgd_page_idx(&pgt, -1ULL) + 1;
 }
 
-static bool kvm_pte_table(kvm_pte_t pte, u32 level)
+static bool kvm_pte_table(kvm_pte_t pte, s8 level)
 {
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	if (!kvm_pte_valid(pte))
@@ -154,11 +157,11 @@ static kvm_pte_t kvm_init_table_pte(kvm_pte_t *childp, struct kvm_pgtable_mm_ops
 	return pte;
 }
 
-static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level)
+static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, s8 level)
 {
 	kvm_pte_t pte = kvm_phys_to_pte(pa);
-	u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE :
-							   KVM_PTE_TYPE_BLOCK;
+	u64 type = (level == KVM_PGTABLE_LAST_LEVEL) ? KVM_PTE_TYPE_PAGE :
+						       KVM_PTE_TYPE_BLOCK;
 
 	pte |= attr & (KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI);
 	pte |= FIELD_PREP(KVM_PTE_TYPE, type);
@@ -203,11 +206,11 @@ static bool kvm_pgtable_walk_continue(const struct kvm_pgtable_walker *walker,
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level);
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level);
 
 static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data,
 				      struct kvm_pgtable_mm_ops *mm_ops,
-				      kvm_pteref_t pteref, u32 level)
+				      kvm_pteref_t pteref, s8 level)
 {
 	enum kvm_pgtable_walk_flags flags = data->walker->flags;
 	kvm_pte_t *ptep = kvm_dereference_pteref(data->walker, pteref);
@@ -272,12 +275,13 @@ out:
 }
 
 static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
-			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level)
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, s8 level)
 {
 	u32 idx;
 	int ret = 0;
 
-	if (WARN_ON_ONCE(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON_ONCE(level < KVM_PGTABLE_FIRST_LEVEL ||
+			 level > KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	for (idx = kvm_pgtable_idx(data, level); idx < PTRS_PER_PTE; ++idx) {
@@ -340,7 +344,7 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
 
 struct leaf_walk_data {
 	kvm_pte_t	pte;
-	u32		level;
+	s8		level;
 };
 
 static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -355,7 +359,7 @@ static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
 }
 
 int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
-			 kvm_pte_t *ptep, u32 *level)
+			 kvm_pte_t *ptep, s8 *level)
 {
 	struct leaf_walk_data data;
 	struct kvm_pgtable_walker walker = {
@@ -401,14 +405,15 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep)
 		if (device)
 			return -EINVAL;
 
-		if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti())
+		if (system_supports_bti_kernel())
 			attr |= KVM_PTE_LEAF_ATTR_HI_S1_GP;
 	} else {
 		attr |= KVM_PTE_LEAF_ATTR_HI_S1_XN;
 	}
 
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap);
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
 	attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -467,7 +472,7 @@ static int hyp_map_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	if (hyp_map_walker_try_leaf(ctx, data))
 		return 0;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	childp = (kvm_pte_t *)mm_ops->zalloc_page(NULL);
@@ -563,14 +568,19 @@ u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
 int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
 			 struct kvm_pgtable_mm_ops *mm_ops)
 {
-	u64 levels = ARM64_HW_PGTABLE_LEVELS(va_bits);
+	s8 start_level = KVM_PGTABLE_LAST_LEVEL + 1 -
+			 ARM64_HW_PGTABLE_LEVELS(va_bits);
+
+	if (start_level < KVM_PGTABLE_FIRST_LEVEL ||
+	    start_level > KVM_PGTABLE_LAST_LEVEL)
+		return -EINVAL;
 
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_page(NULL);
 	if (!pgt->pgd)
 		return -ENOMEM;
 
 	pgt->ia_bits		= va_bits;
-	pgt->start_level	= KVM_PGTABLE_MAX_LEVELS - levels;
+	pgt->start_level	= start_level;
 	pgt->mm_ops		= mm_ops;
 	pgt->mmu		= NULL;
 	pgt->force_pte_cb	= NULL;
@@ -624,7 +634,7 @@ struct stage2_map_data {
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 {
 	u64 vtcr = VTCR_EL2_FLAGS;
-	u8 lvls;
+	s8 lvls;
 
 	vtcr |= kvm_get_parange(mmfr0) << VTCR_EL2_PS_SHIFT;
 	vtcr |= VTCR_EL2_T0SZ(phys_shift);
@@ -635,6 +645,15 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 	lvls = stage2_pgtable_levels(phys_shift);
 	if (lvls < 2)
 		lvls = 2;
+
+	/*
+	 * When LPA2 is enabled, the HW supports an extra level of translation
+	 * (for 5 in total) when using 4K pages. It also introduces VTCR_EL2.SL2
+	 * to as an addition to SL0 to enable encoding this extra start level.
+	 * However, since we always use concatenated pages for the first level
+	 * lookup, we will never need this extra level and therefore do not need
+	 * to touch SL2.
+	 */
 	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
 
 #ifdef CONFIG_ARM64_HW_AFDBM
@@ -654,6 +673,9 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 		vtcr |= VTCR_EL2_HA;
 #endif /* CONFIG_ARM64_HW_AFDBM */
 
+	if (kvm_lpa2_is_enabled())
+		vtcr |= VTCR_EL2_DS;
+
 	/* Set the vmid bits */
 	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
 		VTCR_EL2_VS_16BIT :
@@ -664,7 +686,7 @@ u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
 
 static bool stage2_has_fwb(struct kvm_pgtable *pgt)
 {
-	if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+	if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
 		return false;
 
 	return !(pgt->flags & KVM_PGTABLE_S2_NOFWB);
@@ -711,7 +733,9 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p
 	if (prot & KVM_PGTABLE_PROT_W)
 		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
 
-	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+	if (!kvm_lpa2_is_enabled())
+		attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+
 	attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
 	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
@@ -805,12 +829,15 @@ static bool stage2_try_break_pte(const struct kvm_pgtable_visit_ctx *ctx,
 		 * Perform the appropriate TLB invalidation based on the
 		 * evicted pte value (if any).
 		 */
-		if (kvm_pte_table(ctx->old, ctx->level))
-			kvm_tlb_flush_vmid_range(mmu, ctx->addr,
-						kvm_granule_size(ctx->level));
-		else if (kvm_pte_valid(ctx->old))
+		if (kvm_pte_table(ctx->old, ctx->level)) {
+			u64 size = kvm_granule_size(ctx->level);
+			u64 addr = ALIGN_DOWN(ctx->addr, size);
+
+			kvm_tlb_flush_vmid_range(mmu, addr, size);
+		} else if (kvm_pte_valid(ctx->old)) {
 			kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
 				     ctx->addr, ctx->level);
+		}
 	}
 
 	if (stage2_pte_is_counted(ctx->old))
@@ -902,7 +929,7 @@ static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx,
 {
 	u64 phys = stage2_map_walker_phys_addr(ctx, data);
 
-	if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1)))
+	if (data->force_pte && ctx->level < KVM_PGTABLE_LAST_LEVEL)
 		return false;
 
 	return kvm_block_mapping_supported(ctx, phys);
@@ -981,7 +1008,7 @@ static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
 	if (ret != -E2BIG)
 		return ret;
 
-	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+	if (WARN_ON(ctx->level == KVM_PGTABLE_LAST_LEVEL))
 		return -EINVAL;
 
 	if (!data->memcache)
@@ -1151,7 +1178,7 @@ struct stage2_attr_data {
 	kvm_pte_t			attr_set;
 	kvm_pte_t			attr_clr;
 	kvm_pte_t			pte;
-	u32				level;
+	s8				level;
 };
 
 static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
@@ -1194,7 +1221,7 @@ static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
 static int stage2_update_leaf_attrs(struct kvm_pgtable *pgt, u64 addr,
 				    u64 size, kvm_pte_t attr_set,
 				    kvm_pte_t attr_clr, kvm_pte_t *orig_pte,
-				    u32 *level, enum kvm_pgtable_walk_flags flags)
+				    s8 *level, enum kvm_pgtable_walk_flags flags)
 {
 	int ret;
 	kvm_pte_t attr_mask = KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI;
@@ -1296,7 +1323,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 				   enum kvm_pgtable_prot prot)
 {
 	int ret;
-	u32 level;
+	s8 level;
 	kvm_pte_t set = 0, clr = 0;
 
 	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
@@ -1314,7 +1341,7 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 	ret = stage2_update_leaf_attrs(pgt, addr, 1, set, clr, NULL, &level,
 				       KVM_PGTABLE_WALK_HANDLE_FAULT |
 				       KVM_PGTABLE_WALK_SHARED);
-	if (!ret)
+	if (!ret || ret == -EAGAIN)
 		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa_nsh, pgt->mmu, addr, level);
 	return ret;
 }
@@ -1349,7 +1376,7 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
 }
 
 kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
-					      u64 phys, u32 level,
+					      u64 phys, s8 level,
 					      enum kvm_pgtable_prot prot,
 					      void *mc, bool force_pte)
 {
@@ -1395,7 +1422,6 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
 				 level + 1);
 	if (ret) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level);
-		mm_ops->put_page(pgtable);
 		return ERR_PTR(ret);
 	}
 
@@ -1407,7 +1433,7 @@ kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
  * fully populated tree up to the PTE entries. Note that @level is
  * interpreted as in "level @level entry".
  */
-static int stage2_block_get_nr_page_tables(u32 level)
+static int stage2_block_get_nr_page_tables(s8 level)
 {
 	switch (level) {
 	case 1:
@@ -1418,7 +1444,7 @@ static int stage2_block_get_nr_page_tables(u32 level)
 		return 0;
 	default:
 		WARN_ON_ONCE(level < KVM_PGTABLE_MIN_BLOCK_LEVEL ||
-			     level >= KVM_PGTABLE_MAX_LEVELS);
+			     level > KVM_PGTABLE_LAST_LEVEL);
 		return -EINVAL;
 	};
 }
@@ -1431,13 +1457,13 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 	struct kvm_s2_mmu *mmu;
 	kvm_pte_t pte = ctx->old, new, *childp;
 	enum kvm_pgtable_prot prot;
-	u32 level = ctx->level;
+	s8 level = ctx->level;
 	bool force_pte;
 	int nr_pages;
 	u64 phys;
 
 	/* No huge-pages exist at the last level */
-	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+	if (level == KVM_PGTABLE_LAST_LEVEL)
 		return 0;
 
 	/* We only split valid block mappings */
@@ -1478,7 +1504,6 @@ static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
 
 	if (!stage2_try_break_pte(ctx, mmu)) {
 		kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level);
-		mm_ops->put_page(childp);
 		return -EAGAIN;
 	}
 
@@ -1511,10 +1536,10 @@ int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
 			      kvm_pgtable_force_pte_cb_t force_pte_cb)
 {
 	size_t pgd_sz;
-	u64 vtcr = mmu->arch->vtcr;
+	u64 vtcr = mmu->vtcr;
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_pages_exact(pgd_sz);
@@ -1537,7 +1562,7 @@ size_t kvm_pgtable_stage2_pgd_size(u64 vtcr)
 {
 	u32 ia_bits = VTCR_EL2_IPA(vtcr);
 	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
-	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+	s8 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
 
 	return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
 }
@@ -1573,7 +1598,7 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
 	pgt->pgd = NULL;
 }
 
-void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level)
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, s8 level)
 {
 	kvm_pteref_t ptep = (kvm_pteref_t)pgtable;
 	struct kvm_pgtable_walker walker = {
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index 448b17080..1581df6ae 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -137,12 +137,12 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 NOKPROBE_SYMBOL(__deactivate_traps);
 
 /*
- * Disable IRQs in {activate,deactivate}_traps_vhe_{load,put}() to
+ * Disable IRQs in __vcpu_{load,put}_{activate,deactivate}_traps() to
  * prevent a race condition between context switching of PMUSERENR_EL0
  * in __{activate,deactivate}_traps_common() and IPIs that attempts to
  * update PMUSERENR_EL0. See also kvm_set_pmuserenr().
  */
-void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
+static void __vcpu_load_activate_traps(struct kvm_vcpu *vcpu)
 {
 	unsigned long flags;
 
@@ -151,7 +151,7 @@ void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
 	local_irq_restore(flags);
 }
 
-void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
+static void __vcpu_put_deactivate_traps(struct kvm_vcpu *vcpu)
 {
 	unsigned long flags;
 
@@ -160,6 +160,19 @@ void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
 	local_irq_restore(flags);
 }
 
+void kvm_vcpu_load_vhe(struct kvm_vcpu *vcpu)
+{
+	__vcpu_load_switch_sysregs(vcpu);
+	__vcpu_load_activate_traps(vcpu);
+	__load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch);
+}
+
+void kvm_vcpu_put_vhe(struct kvm_vcpu *vcpu)
+{
+	__vcpu_put_deactivate_traps(vcpu);
+	__vcpu_put_switch_sysregs(vcpu);
+}
+
 static const exit_handler_fn hyp_exit_handlers[] = {
 	[0 ... ESR_ELx_EC_MAX]		= NULL,
 	[ESR_ELx_EC_CP15_32]		= kvm_hyp_handle_cp15_32,
@@ -170,6 +183,7 @@ static const exit_handler_fn hyp_exit_handlers[] = {
 	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
 	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
 	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+	[ESR_ELx_EC_MOPS]		= kvm_hyp_handle_mops,
 };
 
 static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
@@ -214,17 +228,11 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 	sysreg_save_host_state_vhe(host_ctxt);
 
 	/*
-	 * ARM erratum 1165522 requires us to configure both stage 1 and
-	 * stage 2 translation for the guest context before we clear
-	 * HCR_EL2.TGE.
-	 *
-	 * We have already configured the guest's stage 1 translation in
-	 * kvm_vcpu_load_sysregs_vhe above.  We must now call
-	 * __load_stage2 before __activate_traps, because
-	 * __load_stage2 configures stage 2 translation, and
-	 * __activate_traps clear HCR_EL2.TGE (among other things).
+	 * Note that ARM erratum 1165522 requires us to configure both stage 1
+	 * and stage 2 translation for the guest context before we clear
+	 * HCR_EL2.TGE. The stage 1 and stage 2 guest context has already been
+	 * loaded on the CPU in kvm_vcpu_load_vhe().
 	 */
-	__load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch);
 	__activate_traps(vcpu);
 
 	__kvm_adjust_pc(vcpu);
diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
index b35a178e7..8e1e0d503 100644
--- a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
@@ -52,7 +52,7 @@ void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt)
 NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe);
 
 /**
- * kvm_vcpu_load_sysregs_vhe - Load guest system registers to the physical CPU
+ * __vcpu_load_switch_sysregs - Load guest system registers to the physical CPU
  *
  * @vcpu: The VCPU pointer
  *
@@ -62,7 +62,7 @@ NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe);
  * and loading system register state early avoids having to load them on
  * every entry to the VM.
  */
-void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu)
+void __vcpu_load_switch_sysregs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
 	struct kvm_cpu_context *host_ctxt;
@@ -92,12 +92,10 @@ void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu)
 	__sysreg_restore_el1_state(guest_ctxt);
 
 	vcpu_set_flag(vcpu, SYSREGS_ON_CPU);
-
-	activate_traps_vhe_load(vcpu);
 }
 
 /**
- * kvm_vcpu_put_sysregs_vhe - Restore host system registers to the physical CPU
+ * __vcpu_put_switch_syregs - Restore host system registers to the physical CPU
  *
  * @vcpu: The VCPU pointer
  *
@@ -107,13 +105,12 @@ void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu)
  * and deferring saving system register state until we're no longer running the
  * VCPU avoids having to save them on every exit from the VM.
  */
-void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu)
+void __vcpu_put_switch_sysregs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
 	struct kvm_cpu_context *host_ctxt;
 
 	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
-	deactivate_traps_vhe_put(vcpu);
 
 	__sysreg_save_el1_state(guest_ctxt);
 	__sysreg_save_user_state(guest_ctxt);
diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
index 46bd43f61..1a60b9538 100644
--- a/arch/arm64/kvm/hyp/vhe/tlb.c
+++ b/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -11,18 +11,25 @@
 #include <asm/tlbflush.h>
 
 struct tlb_inv_context {
-	unsigned long	flags;
-	u64		tcr;
-	u64		sctlr;
+	struct kvm_s2_mmu	*mmu;
+	unsigned long		flags;
+	u64			tcr;
+	u64			sctlr;
 };
 
 static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
 				  struct tlb_inv_context *cxt)
 {
+	struct kvm_vcpu *vcpu = kvm_get_running_vcpu();
 	u64 val;
 
 	local_irq_save(cxt->flags);
 
+	if (vcpu && mmu != vcpu->arch.hw_mmu)
+		cxt->mmu = vcpu->arch.hw_mmu;
+	else
+		cxt->mmu = NULL;
+
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
 		/*
 		 * For CPUs that are affected by ARM errata 1165522 or 1530923,
@@ -66,10 +73,13 @@ static void __tlb_switch_to_host(struct tlb_inv_context *cxt)
 	 * We're done with the TLB operation, let's restore the host's
 	 * view of HCR_EL2.
 	 */
-	write_sysreg(0, vttbr_el2);
 	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
 	isb();
 
+	/* ... and the stage-2 MMU context that we switched away from */
+	if (cxt->mmu)
+		__load_stage2(cxt->mmu, cxt->mmu->arch);
+
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
 		/* Restore the registers to what they were */
 		write_sysreg_el1(cxt->tcr, SYS_TCR);
@@ -161,7 +171,8 @@ void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
 	/* Switch to requested VMID */
 	__tlb_switch_to_guest(mmu, &cxt);
 
-	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0);
+	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride,
+				TLBI_TTL_UNKNOWN);
 
 	dsb(ish);
 	__tlbi(vmalle1is);
@@ -206,18 +217,5 @@ void __kvm_flush_vm_context(void)
 {
 	dsb(ishst);
 	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
 	dsb(ish);
 }
diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
index 7fb4df045..5763d979d 100644
--- a/arch/arm64/kvm/hypercalls.c
+++ b/arch/arm64/kvm/hypercalls.c
@@ -133,12 +133,10 @@ static bool kvm_smccc_test_fw_bmap(struct kvm_vcpu *vcpu, u32 func_id)
 						   ARM_SMCCC_SMC_64,		\
 						   0, ARM_SMCCC_FUNC_MASK)
 
-static void init_smccc_filter(struct kvm *kvm)
+static int kvm_smccc_filter_insert_reserved(struct kvm *kvm)
 {
 	int r;
 
-	mt_init(&kvm->arch.smccc_filter);
-
 	/*
 	 * Prevent userspace from handling any SMCCC calls in the architecture
 	 * range, avoiding the risk of misrepresenting Spectre mitigation status
@@ -148,14 +146,25 @@ static void init_smccc_filter(struct kvm *kvm)
 			       SMC32_ARCH_RANGE_BEGIN, SMC32_ARCH_RANGE_END,
 			       xa_mk_value(KVM_SMCCC_FILTER_HANDLE),
 			       GFP_KERNEL_ACCOUNT);
-	WARN_ON_ONCE(r);
+	if (r)
+		goto out_destroy;
 
 	r = mtree_insert_range(&kvm->arch.smccc_filter,
 			       SMC64_ARCH_RANGE_BEGIN, SMC64_ARCH_RANGE_END,
 			       xa_mk_value(KVM_SMCCC_FILTER_HANDLE),
 			       GFP_KERNEL_ACCOUNT);
-	WARN_ON_ONCE(r);
+	if (r)
+		goto out_destroy;
 
+	return 0;
+out_destroy:
+	mtree_destroy(&kvm->arch.smccc_filter);
+	return r;
+}
+
+static bool kvm_smccc_filter_configured(struct kvm *kvm)
+{
+	return !mtree_empty(&kvm->arch.smccc_filter);
 }
 
 static int kvm_smccc_set_filter(struct kvm *kvm, struct kvm_smccc_filter __user *uaddr)
@@ -184,13 +193,14 @@ static int kvm_smccc_set_filter(struct kvm *kvm, struct kvm_smccc_filter __user
 		goto out_unlock;
 	}
 
+	if (!kvm_smccc_filter_configured(kvm)) {
+		r = kvm_smccc_filter_insert_reserved(kvm);
+		if (WARN_ON_ONCE(r))
+			goto out_unlock;
+	}
+
 	r = mtree_insert_range(&kvm->arch.smccc_filter, start, end,
 			       xa_mk_value(filter.action), GFP_KERNEL_ACCOUNT);
-	if (r)
-		goto out_unlock;
-
-	set_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags);
-
 out_unlock:
 	mutex_unlock(&kvm->arch.config_lock);
 	return r;
@@ -201,7 +211,7 @@ static u8 kvm_smccc_filter_get_action(struct kvm *kvm, u32 func_id)
 	unsigned long idx = func_id;
 	void *val;
 
-	if (!test_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags))
+	if (!kvm_smccc_filter_configured(kvm))
 		return KVM_SMCCC_FILTER_HANDLE;
 
 	/*
@@ -387,7 +397,7 @@ void kvm_arm_init_hypercalls(struct kvm *kvm)
 	smccc_feat->std_hyp_bmap = KVM_ARM_SMCCC_STD_HYP_FEATURES;
 	smccc_feat->vendor_hyp_bmap = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES;
 
-	init_smccc_filter(kvm);
+	mt_init(&kvm->arch.smccc_filter);
 }
 
 void kvm_arm_teardown_hypercalls(struct kvm *kvm)
@@ -554,7 +564,7 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	{
 		bool wants_02;
 
-		wants_02 = test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features);
+		wants_02 = vcpu_has_feature(vcpu, KVM_ARM_VCPU_PSCI_0_2);
 
 		switch (val) {
 		case KVM_ARM_PSCI_0_1:
diff --git a/arch/arm64/kvm/mmio.c b/arch/arm64/kvm/mmio.c
index 3dd38a151..200c8019a 100644
--- a/arch/arm64/kvm/mmio.c
+++ b/arch/arm64/kvm/mmio.c
@@ -135,6 +135,9 @@ int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 	 * volunteered to do so, and bail out otherwise.
 	 */
 	if (!kvm_vcpu_dabt_isvalid(vcpu)) {
+		trace_kvm_mmio_nisv(*vcpu_pc(vcpu), kvm_vcpu_get_esr(vcpu),
+				    kvm_vcpu_get_hfar(vcpu), fault_ipa);
+
 		if (test_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER,
 			     &vcpu->kvm->arch.flags)) {
 			run->exit_reason = KVM_EXIT_ARM_NISV;
@@ -143,7 +146,6 @@ int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 			return 0;
 		}
 
-		kvm_pr_unimpl("Data abort outside memslots with no valid syndrome info\n");
 		return -ENOSYS;
 	}
 
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 482280fe2..92270acfc 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -223,12 +223,12 @@ static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head)
 {
 	struct page *page = container_of(head, struct page, rcu_head);
 	void *pgtable = page_to_virt(page);
-	u32 level = page_private(page);
+	s8 level = page_private(page);
 
 	kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level);
 }
 
-static void stage2_free_unlinked_table(void *addr, u32 level)
+static void stage2_free_unlinked_table(void *addr, s8 level)
 {
 	struct page *page = virt_to_page(addr);
 
@@ -804,13 +804,13 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	struct kvm_pgtable pgt = {
 		.pgd		= (kvm_pteref_t)kvm->mm->pgd,
 		.ia_bits	= vabits_actual,
-		.start_level	= (KVM_PGTABLE_MAX_LEVELS -
-				   CONFIG_PGTABLE_LEVELS),
+		.start_level	= (KVM_PGTABLE_LAST_LEVEL -
+				   CONFIG_PGTABLE_LEVELS + 1),
 		.mm_ops		= &kvm_user_mm_ops,
 	};
 	unsigned long flags;
 	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
-	u32 level = ~0;
+	s8 level = S8_MAX;
 	int ret;
 
 	/*
@@ -829,7 +829,9 @@ static int get_user_mapping_size(struct kvm *kvm, u64 addr)
 	 * Not seeing an error, but not updating level? Something went
 	 * deeply wrong...
 	 */
-	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+	if (WARN_ON(level > KVM_PGTABLE_LAST_LEVEL))
+		return -EFAULT;
+	if (WARN_ON(level < KVM_PGTABLE_FIRST_LEVEL))
 		return -EFAULT;
 
 	/* Oops, the userspace PTs are gone... Replay the fault */
@@ -892,7 +894,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long t
 
 	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
-	kvm->arch.vtcr = kvm_get_vtcr(mmfr0, mmfr1, phys_shift);
+	mmu->vtcr = kvm_get_vtcr(mmfr0, mmfr1, phys_shift);
 
 	if (mmu->pgt != NULL) {
 		kvm_err("kvm_arch already initialized?\n");
@@ -1067,7 +1069,8 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 	phys_addr_t addr;
 	int ret = 0;
 	struct kvm_mmu_memory_cache cache = { .gfp_zero = __GFP_ZERO };
-	struct kvm_pgtable *pgt = kvm->arch.mmu.pgt;
+	struct kvm_s2_mmu *mmu = &kvm->arch.mmu;
+	struct kvm_pgtable *pgt = mmu->pgt;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_DEVICE |
 				     KVM_PGTABLE_PROT_R |
 				     (writable ? KVM_PGTABLE_PROT_W : 0);
@@ -1080,7 +1083,7 @@ int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 
 	for (addr = guest_ipa; addr < guest_ipa + size; addr += PAGE_SIZE) {
 		ret = kvm_mmu_topup_memory_cache(&cache,
-						 kvm_mmu_cache_min_pages(kvm));
+						 kvm_mmu_cache_min_pages(mmu));
 		if (ret)
 			break;
 
@@ -1298,28 +1301,8 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 		if (sz < PMD_SIZE)
 			return PAGE_SIZE;
 
-		/*
-		 * The address we faulted on is backed by a transparent huge
-		 * page.  However, because we map the compound huge page and
-		 * not the individual tail page, we need to transfer the
-		 * refcount to the head page.  We have to be careful that the
-		 * THP doesn't start to split while we are adjusting the
-		 * refcounts.
-		 *
-		 * We are sure this doesn't happen, because mmu_invalidate_retry
-		 * was successful and we are holding the mmu_lock, so if this
-		 * THP is trying to split, it will be blocked in the mmu
-		 * notifier before touching any of the pages, specifically
-		 * before being able to call __split_huge_page_refcount().
-		 *
-		 * We can therefore safely transfer the refcount from PG_tail
-		 * to PG_head and switch the pfn from a tail page to the head
-		 * page accordingly.
-		 */
 		*ipap &= PMD_MASK;
-		kvm_release_pfn_clean(pfn);
 		pfn &= ~(PTRS_PER_PMD - 1);
-		get_page(pfn_to_page(pfn));
 		*pfnp = pfn;
 
 		return PMD_SIZE;
@@ -1393,7 +1376,7 @@ static bool kvm_vma_mte_allowed(struct vm_area_struct *vma)
 
 static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			  struct kvm_memory_slot *memslot, unsigned long hva,
-			  unsigned long fault_status)
+			  bool fault_is_perm)
 {
 	int ret = 0;
 	bool write_fault, writable, force_pte = false;
@@ -1407,17 +1390,17 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	gfn_t gfn;
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
-	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
 	long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
-	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
+	if (fault_is_perm)
+		fault_granule = kvm_vcpu_trap_get_perm_fault_granule(vcpu);
 	write_fault = kvm_is_write_fault(vcpu);
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
 	VM_BUG_ON(write_fault && exec_fault);
 
-	if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) {
+	if (fault_is_perm && !write_fault && !exec_fault) {
 		kvm_err("Unexpected L2 read permission error\n");
 		return -EFAULT;
 	}
@@ -1428,10 +1411,9 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * only exception to this is when dirty logging is enabled at runtime
 	 * and a write fault needs to collapse a block entry into a table.
 	 */
-	if (fault_status != ESR_ELx_FSC_PERM ||
-	    (logging_active && write_fault)) {
+	if (!fault_is_perm || (logging_active && write_fault)) {
 		ret = kvm_mmu_topup_memory_cache(memcache,
-						 kvm_mmu_cache_min_pages(kvm));
+						 kvm_mmu_cache_min_pages(vcpu->arch.hw_mmu));
 		if (ret)
 			return ret;
 	}
@@ -1546,8 +1528,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * backed by a THP and thus use block mapping if possible.
 	 */
 	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
-		if (fault_status ==  ESR_ELx_FSC_PERM &&
-		    fault_granule > PAGE_SIZE)
+		if (fault_is_perm && fault_granule > PAGE_SIZE)
 			vma_pagesize = fault_granule;
 		else
 			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
@@ -1560,7 +1541,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		}
 	}
 
-	if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) {
+	if (!fault_is_perm && !device && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new disallowed VMA */
 		if (mte_allowed) {
 			sanitise_mte_tags(kvm, pfn, vma_pagesize);
@@ -1578,7 +1559,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 
 	if (device)
 		prot |= KVM_PGTABLE_PROT_DEVICE;
-	else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
+	else if (cpus_have_final_cap(ARM64_HAS_CACHE_DIC))
 		prot |= KVM_PGTABLE_PROT_X;
 
 	/*
@@ -1586,7 +1567,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
 	 * kvm_pgtable_stage2_map() should be called to change block size.
 	 */
-	if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule)
+	if (fault_is_perm && vma_pagesize == fault_granule)
 		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
 	else
 		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
@@ -1637,7 +1618,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
  */
 int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 {
-	unsigned long fault_status;
+	unsigned long esr;
 	phys_addr_t fault_ipa;
 	struct kvm_memory_slot *memslot;
 	unsigned long hva;
@@ -1645,12 +1626,12 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 	int ret, idx;
 
-	fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
+	esr = kvm_vcpu_get_esr(vcpu);
 
 	fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
 	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
 
-	if (fault_status == ESR_ELx_FSC_FAULT) {
+	if (esr_fsc_is_translation_fault(esr)) {
 		/* Beyond sanitised PARange (which is the IPA limit) */
 		if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) {
 			kvm_inject_size_fault(vcpu);
@@ -1685,9 +1666,9 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 			      kvm_vcpu_get_hfar(vcpu), fault_ipa);
 
 	/* Check the stage-2 fault is trans. fault or write fault */
-	if (fault_status != ESR_ELx_FSC_FAULT &&
-	    fault_status != ESR_ELx_FSC_PERM &&
-	    fault_status != ESR_ELx_FSC_ACCESS) {
+	if (!esr_fsc_is_translation_fault(esr) &&
+	    !esr_fsc_is_permission_fault(esr) &&
+	    !esr_fsc_is_access_flag_fault(esr)) {
 		kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
 			kvm_vcpu_trap_get_class(vcpu),
 			(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
@@ -1747,15 +1728,16 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	}
 
 	/* Userspace should not be able to register out-of-bounds IPAs */
-	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm));
+	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->arch.hw_mmu));
 
-	if (fault_status == ESR_ELx_FSC_ACCESS) {
+	if (esr_fsc_is_access_flag_fault(esr)) {
 		handle_access_fault(vcpu, fault_ipa);
 		ret = 1;
 		goto out_unlock;
 	}
 
-	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status);
+	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva,
+			     esr_fsc_is_permission_fault(esr));
 	if (ret == 0)
 		ret = 1;
 out:
@@ -2021,7 +2003,7 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	 * Prevent userspace from creating a memory region outside of the IPA
 	 * space addressable by the KVM guest IPA space.
 	 */
-	if ((new->base_gfn + new->npages) > (kvm_phys_size(kvm) >> PAGE_SHIFT))
+	if ((new->base_gfn + new->npages) > (kvm_phys_size(&kvm->arch.mmu) >> PAGE_SHIFT))
 		return -EFAULT;
 
 	hva = new->userspace_addr;
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
index 042695a21..ba95d044b 100644
--- a/arch/arm64/kvm/nested.c
+++ b/arch/arm64/kvm/nested.c
@@ -23,13 +23,9 @@
  * This list should get updated as new features get added to the NV
  * support, and new extension to the architecture.
  */
-void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
-			  const struct sys_reg_desc *r)
+static u64 limit_nv_id_reg(u32 id, u64 val)
 {
-	u32 id = reg_to_encoding(r);
-	u64 val, tmp;
-
-	val = p->regval;
+	u64 tmp;
 
 	switch (id) {
 	case SYS_ID_AA64ISAR0_EL1:
@@ -158,5 +154,17 @@ void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
 		break;
 	}
 
-	p->regval = val;
+	return val;
+}
+int kvm_init_nv_sysregs(struct kvm *kvm)
+{
+	mutex_lock(&kvm->arch.config_lock);
+
+	for (int i = 0; i < KVM_ARM_ID_REG_NUM; i++)
+		kvm->arch.id_regs[i] = limit_nv_id_reg(IDX_IDREG(i),
+						       kvm->arch.id_regs[i]);
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	return 0;
 }
diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c
index 6ff3ec18c..b7be96a53 100644
--- a/arch/arm64/kvm/pkvm.c
+++ b/arch/arm64/kvm/pkvm.c
@@ -101,6 +101,17 @@ void __init kvm_hyp_reserve(void)
 		 hyp_mem_base);
 }
 
+static void __pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+{
+	if (host_kvm->arch.pkvm.handle) {
+		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
+					  host_kvm->arch.pkvm.handle));
+	}
+
+	host_kvm->arch.pkvm.handle = 0;
+	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+}
+
 /*
  * Allocates and donates memory for hypervisor VM structs at EL2.
  *
@@ -123,7 +134,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	if (host_kvm->created_vcpus < 1)
 		return -EINVAL;
 
-	pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.vtcr);
+	pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.mmu.vtcr);
 
 	/*
 	 * The PGD pages will be reclaimed using a hyp_memcache which implies
@@ -181,7 +192,7 @@ static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
 	return 0;
 
 destroy_vm:
-	pkvm_destroy_hyp_vm(host_kvm);
+	__pkvm_destroy_hyp_vm(host_kvm);
 	return ret;
 free_vm:
 	free_pages_exact(hyp_vm, hyp_vm_sz);
@@ -194,23 +205,19 @@ int pkvm_create_hyp_vm(struct kvm *host_kvm)
 {
 	int ret = 0;
 
-	mutex_lock(&host_kvm->lock);
+	mutex_lock(&host_kvm->arch.config_lock);
 	if (!host_kvm->arch.pkvm.handle)
 		ret = __pkvm_create_hyp_vm(host_kvm);
-	mutex_unlock(&host_kvm->lock);
+	mutex_unlock(&host_kvm->arch.config_lock);
 
 	return ret;
 }
 
 void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
 {
-	if (host_kvm->arch.pkvm.handle) {
-		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
-					  host_kvm->arch.pkvm.handle));
-	}
-
-	host_kvm->arch.pkvm.handle = 0;
-	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+	mutex_lock(&host_kvm->arch.config_lock);
+	__pkvm_destroy_hyp_vm(host_kvm);
+	mutex_unlock(&host_kvm->arch.config_lock);
 }
 
 int pkvm_init_host_vm(struct kvm *host_kvm)
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index 6b066e04d..3d9467ff7 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -60,6 +60,23 @@ static u32 kvm_pmu_event_mask(struct kvm *kvm)
 	return __kvm_pmu_event_mask(pmuver);
 }
 
+u64 kvm_pmu_evtyper_mask(struct kvm *kvm)
+{
+	u64 mask = ARMV8_PMU_EXCLUDE_EL1 | ARMV8_PMU_EXCLUDE_EL0 |
+		   kvm_pmu_event_mask(kvm);
+	u64 pfr0 = IDREG(kvm, SYS_ID_AA64PFR0_EL1);
+
+	if (SYS_FIELD_GET(ID_AA64PFR0_EL1, EL2, pfr0))
+		mask |= ARMV8_PMU_INCLUDE_EL2;
+
+	if (SYS_FIELD_GET(ID_AA64PFR0_EL1, EL3, pfr0))
+		mask |= ARMV8_PMU_EXCLUDE_NS_EL0 |
+			ARMV8_PMU_EXCLUDE_NS_EL1 |
+			ARMV8_PMU_EXCLUDE_EL3;
+
+	return mask;
+}
+
 /**
  * kvm_pmc_is_64bit - determine if counter is 64bit
  * @pmc: counter context
@@ -72,7 +89,7 @@ static bool kvm_pmc_is_64bit(struct kvm_pmc *pmc)
 
 static bool kvm_pmc_has_64bit_overflow(struct kvm_pmc *pmc)
 {
-	u64 val = __vcpu_sys_reg(kvm_pmc_to_vcpu(pmc), PMCR_EL0);
+	u64 val = kvm_vcpu_read_pmcr(kvm_pmc_to_vcpu(pmc));
 
 	return (pmc->idx < ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LP)) ||
 	       (pmc->idx == ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LC));
@@ -250,9 +267,8 @@ void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu)
 
 u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
 {
-	u64 val = __vcpu_sys_reg(vcpu, PMCR_EL0) >> ARMV8_PMU_PMCR_N_SHIFT;
+	u64 val = FIELD_GET(ARMV8_PMU_PMCR_N, kvm_vcpu_read_pmcr(vcpu));
 
-	val &= ARMV8_PMU_PMCR_N_MASK;
 	if (val == 0)
 		return BIT(ARMV8_PMU_CYCLE_IDX);
 	else
@@ -272,7 +288,7 @@ void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
 	if (!kvm_vcpu_has_pmu(vcpu))
 		return;
 
-	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val)
+	if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E) || !val)
 		return;
 
 	for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) {
@@ -324,7 +340,7 @@ static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu)
 {
 	u64 reg = 0;
 
-	if ((__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) {
+	if ((kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E)) {
 		reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 		reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
 		reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
@@ -348,7 +364,7 @@ static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
 	pmu->irq_level = overflow;
 
 	if (likely(irqchip_in_kernel(vcpu->kvm))) {
-		int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
+		int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu,
 					      pmu->irq_num, overflow, pmu);
 		WARN_ON(ret);
 	}
@@ -426,7 +442,7 @@ static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu,
 {
 	int i;
 
-	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E))
+	if (!(kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E))
 		return;
 
 	/* Weed out disabled counters */
@@ -569,7 +585,7 @@ void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc)
 {
 	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
-	return (__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) &&
+	return (kvm_vcpu_read_pmcr(vcpu) & ARMV8_PMU_PMCR_E) &&
 	       (__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & BIT(pmc->idx));
 }
 
@@ -584,6 +600,7 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc)
 	struct perf_event *event;
 	struct perf_event_attr attr;
 	u64 eventsel, reg, data;
+	bool p, u, nsk, nsu;
 
 	reg = counter_index_to_evtreg(pmc->idx);
 	data = __vcpu_sys_reg(vcpu, reg);
@@ -610,13 +627,18 @@ static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc)
 	    !test_bit(eventsel, vcpu->kvm->arch.pmu_filter))
 		return;
 
+	p = data & ARMV8_PMU_EXCLUDE_EL1;
+	u = data & ARMV8_PMU_EXCLUDE_EL0;
+	nsk = data & ARMV8_PMU_EXCLUDE_NS_EL1;
+	nsu = data & ARMV8_PMU_EXCLUDE_NS_EL0;
+
 	memset(&attr, 0, sizeof(struct perf_event_attr));
 	attr.type = arm_pmu->pmu.type;
 	attr.size = sizeof(attr);
 	attr.pinned = 1;
 	attr.disabled = !kvm_pmu_counter_is_enabled(pmc);
-	attr.exclude_user = data & ARMV8_PMU_EXCLUDE_EL0 ? 1 : 0;
-	attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0;
+	attr.exclude_user = (u != nsu);
+	attr.exclude_kernel = (p != nsk);
 	attr.exclude_hv = 1; /* Don't count EL2 events */
 	attr.exclude_host = 1; /* Don't count host events */
 	attr.config = eventsel;
@@ -657,18 +679,13 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
 				    u64 select_idx)
 {
 	struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, select_idx);
-	u64 reg, mask;
+	u64 reg;
 
 	if (!kvm_vcpu_has_pmu(vcpu))
 		return;
 
-	mask  =  ARMV8_PMU_EVTYPE_MASK;
-	mask &= ~ARMV8_PMU_EVTYPE_EVENT;
-	mask |= kvm_pmu_event_mask(vcpu->kvm);
-
 	reg = counter_index_to_evtreg(pmc->idx);
-
-	__vcpu_sys_reg(vcpu, reg) = data & mask;
+	__vcpu_sys_reg(vcpu, reg) = data & kvm_pmu_evtyper_mask(vcpu->kvm);
 
 	kvm_pmu_create_perf_event(pmc);
 }
@@ -717,10 +734,9 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void)
 	 * It is still necessary to get a valid cpu, though, to probe for the
 	 * default PMU instance as userspace is not required to specify a PMU
 	 * type. In order to uphold the preexisting behavior KVM selects the
-	 * PMU instance for the core where the first call to the
-	 * KVM_ARM_VCPU_PMU_V3_CTRL attribute group occurs. A dependent use case
-	 * would be a user with disdain of all things big.LITTLE that affines
-	 * the VMM to a particular cluster of cores.
+	 * PMU instance for the core during vcpu init. A dependent use
+	 * case would be a user with disdain of all things big.LITTLE that
+	 * affines the VMM to a particular cluster of cores.
 	 *
 	 * In any case, userspace should just do the sane thing and use the UAPI
 	 * to select a PMU type directly. But, be wary of the baggage being
@@ -786,6 +802,17 @@ u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
 	return val & mask;
 }
 
+void kvm_vcpu_reload_pmu(struct kvm_vcpu *vcpu)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	kvm_pmu_handle_pmcr(vcpu, kvm_vcpu_read_pmcr(vcpu));
+
+	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= mask;
+	__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= mask;
+	__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= mask;
+}
+
 int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu)
 {
 	if (!kvm_vcpu_has_pmu(vcpu))
@@ -874,6 +901,52 @@ static bool pmu_irq_is_valid(struct kvm *kvm, int irq)
 	return true;
 }
 
+/**
+ * kvm_arm_pmu_get_max_counters - Return the max number of PMU counters.
+ * @kvm: The kvm pointer
+ */
+u8 kvm_arm_pmu_get_max_counters(struct kvm *kvm)
+{
+	struct arm_pmu *arm_pmu = kvm->arch.arm_pmu;
+
+	/*
+	 * The arm_pmu->num_events considers the cycle counter as well.
+	 * Ignore that and return only the general-purpose counters.
+	 */
+	return arm_pmu->num_events - 1;
+}
+
+static void kvm_arm_set_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu)
+{
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	kvm->arch.arm_pmu = arm_pmu;
+	kvm->arch.pmcr_n = kvm_arm_pmu_get_max_counters(kvm);
+}
+
+/**
+ * kvm_arm_set_default_pmu - No PMU set, get the default one.
+ * @kvm: The kvm pointer
+ *
+ * The observant among you will notice that the supported_cpus
+ * mask does not get updated for the default PMU even though it
+ * is quite possible the selected instance supports only a
+ * subset of cores in the system. This is intentional, and
+ * upholds the preexisting behavior on heterogeneous systems
+ * where vCPUs can be scheduled on any core but the guest
+ * counters could stop working.
+ */
+int kvm_arm_set_default_pmu(struct kvm *kvm)
+{
+	struct arm_pmu *arm_pmu = kvm_pmu_probe_armpmu();
+
+	if (!arm_pmu)
+		return -ENODEV;
+
+	kvm_arm_set_pmu(kvm, arm_pmu);
+	return 0;
+}
+
 static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -893,7 +966,7 @@ static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
 				break;
 			}
 
-			kvm->arch.arm_pmu = arm_pmu;
+			kvm_arm_set_pmu(kvm, arm_pmu);
 			cpumask_copy(kvm->arch.supported_cpus, &arm_pmu->supported_cpus);
 			ret = 0;
 			break;
@@ -916,23 +989,6 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 	if (vcpu->arch.pmu.created)
 		return -EBUSY;
 
-	if (!kvm->arch.arm_pmu) {
-		/*
-		 * No PMU set, get the default one.
-		 *
-		 * The observant among you will notice that the supported_cpus
-		 * mask does not get updated for the default PMU even though it
-		 * is quite possible the selected instance supports only a
-		 * subset of cores in the system. This is intentional, and
-		 * upholds the preexisting behavior on heterogeneous systems
-		 * where vCPUs can be scheduled on any core but the guest
-		 * counters could stop working.
-		 */
-		kvm->arch.arm_pmu = kvm_pmu_probe_armpmu();
-		if (!kvm->arch.arm_pmu)
-			return -ENODEV;
-	}
-
 	switch (attr->attr) {
 	case KVM_ARM_VCPU_PMU_V3_IRQ: {
 		int __user *uaddr = (int __user *)(long)attr->addr;
@@ -1072,3 +1128,14 @@ u8 kvm_arm_pmu_get_pmuver_limit(void)
 					      ID_AA64DFR0_EL1_PMUVer_V3P5);
 	return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp);
 }
+
+/**
+ * kvm_vcpu_read_pmcr - Read PMCR_EL0 register for the vCPU
+ * @vcpu: The vcpu pointer
+ */
+u64 kvm_vcpu_read_pmcr(struct kvm_vcpu *vcpu)
+{
+	u64 pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
+
+	return u64_replace_bits(pmcr, vcpu->kvm->arch.pmcr_n, ARMV8_PMU_PMCR_N);
+}
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index 7a65a35ee..68d1d0567 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -73,11 +73,8 @@ int __init kvm_arm_init_sve(void)
 	return 0;
 }
 
-static int kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu)
+static void kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu)
 {
-	if (!system_supports_sve())
-		return -EINVAL;
-
 	vcpu->arch.sve_max_vl = kvm_sve_max_vl;
 
 	/*
@@ -86,8 +83,6 @@ static int kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu)
 	 * kvm_arm_vcpu_finalize(), which freezes the configuration.
 	 */
 	vcpu_set_flag(vcpu, GUEST_HAS_SVE);
-
-	return 0;
 }
 
 /*
@@ -170,20 +165,9 @@ static void kvm_vcpu_reset_sve(struct kvm_vcpu *vcpu)
 		memset(vcpu->arch.sve_state, 0, vcpu_sve_state_size(vcpu));
 }
 
-static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
+static void kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
 {
-	/*
-	 * For now make sure that both address/generic pointer authentication
-	 * features are requested by the userspace together and the system
-	 * supports these capabilities.
-	 */
-	if (!test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
-	    !test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features) ||
-	    !system_has_full_ptr_auth())
-		return -EINVAL;
-
 	vcpu_set_flag(vcpu, GUEST_HAS_PTRAUTH);
-	return 0;
 }
 
 /**
@@ -204,10 +188,9 @@ static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
  * disable preemption around the vcpu reset as we would otherwise race with
  * preempt notifiers which also call put/load.
  */
-int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
+void kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_reset_state reset_state;
-	int ret;
 	bool loaded;
 	u32 pstate;
 
@@ -224,29 +207,16 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	if (loaded)
 		kvm_arch_vcpu_put(vcpu);
 
-	/* Disallow NV+SVE for the time being */
-	if (vcpu_has_nv(vcpu) && vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	if (!kvm_arm_vcpu_sve_finalized(vcpu)) {
-		if (test_bit(KVM_ARM_VCPU_SVE, vcpu->arch.features)) {
-			ret = kvm_vcpu_enable_sve(vcpu);
-			if (ret)
-				goto out;
-		}
+		if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE))
+			kvm_vcpu_enable_sve(vcpu);
 	} else {
 		kvm_vcpu_reset_sve(vcpu);
 	}
 
-	if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
-	    test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) {
-		if (kvm_vcpu_enable_ptrauth(vcpu)) {
-			ret = -EINVAL;
-			goto out;
-		}
-	}
+	if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_ADDRESS) ||
+	    vcpu_has_feature(vcpu, KVM_ARM_VCPU_PTRAUTH_GENERIC))
+		kvm_vcpu_enable_ptrauth(vcpu);
 
 	if (vcpu_el1_is_32bit(vcpu))
 		pstate = VCPU_RESET_PSTATE_SVC;
@@ -255,11 +225,6 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	else
 		pstate = VCPU_RESET_PSTATE_EL1;
 
-	if (kvm_vcpu_has_pmu(vcpu) && !kvm_arm_support_pmu_v3()) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	/* Reset core registers */
 	memset(vcpu_gp_regs(vcpu), 0, sizeof(*vcpu_gp_regs(vcpu)));
 	memset(&vcpu->arch.ctxt.fp_regs, 0, sizeof(vcpu->arch.ctxt.fp_regs));
@@ -294,12 +259,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset timer */
-	ret = kvm_timer_vcpu_reset(vcpu);
-out:
+	kvm_timer_vcpu_reset(vcpu);
+
 	if (loaded)
 		kvm_arch_vcpu_load(vcpu, smp_processor_id());
 	preempt_enable();
-	return ret;
 }
 
 u32 get_kvm_ipa_limit(void)
@@ -316,12 +280,11 @@ int __init kvm_set_ipa_limit(void)
 	parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
 	/*
-	 * IPA size beyond 48 bits could not be supported
-	 * on either 4K or 16K page size. Hence let's cap
-	 * it to 48 bits, in case it's reported as larger
-	 * on the system.
+	 * IPA size beyond 48 bits for 4K and 16K page size is only supported
+	 * when LPA2 is available. So if we have LPA2, enable it, else cap to 48
+	 * bits, in case it's reported as larger on the system.
 	 */
-	if (PAGE_SIZE != SZ_64K)
+	if (!kvm_lpa2_is_enabled() && PAGE_SIZE != SZ_64K)
 		parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48);
 
 	/*
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 0afd6136e..30253bd19 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -45,44 +45,170 @@ static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
 static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 		      u64 val);
 
-static bool read_from_write_only(struct kvm_vcpu *vcpu,
-				 struct sys_reg_params *params,
-				 const struct sys_reg_desc *r)
+static bool bad_trap(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *params,
+		     const struct sys_reg_desc *r,
+		     const char *msg)
 {
-	WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n");
+	WARN_ONCE(1, "Unexpected %s\n", msg);
 	print_sys_reg_instr(params);
 	kvm_inject_undefined(vcpu);
 	return false;
 }
 
+static bool read_from_write_only(struct kvm_vcpu *vcpu,
+				 struct sys_reg_params *params,
+				 const struct sys_reg_desc *r)
+{
+	return bad_trap(vcpu, params, r,
+			"sys_reg read to write-only register");
+}
+
 static bool write_to_read_only(struct kvm_vcpu *vcpu,
 			       struct sys_reg_params *params,
 			       const struct sys_reg_desc *r)
 {
-	WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n");
-	print_sys_reg_instr(params);
-	kvm_inject_undefined(vcpu);
-	return false;
+	return bad_trap(vcpu, params, r,
+			"sys_reg write to read-only register");
+}
+
+#define PURE_EL2_SYSREG(el2)						\
+	case el2: {							\
+		*el1r = el2;						\
+		return true;						\
+	}
+
+#define MAPPED_EL2_SYSREG(el2, el1, fn)					\
+	case el2: {							\
+		*xlate = fn;						\
+		*el1r = el1;						\
+		return true;						\
+	}
+
+static bool get_el2_to_el1_mapping(unsigned int reg,
+				   unsigned int *el1r, u64 (**xlate)(u64))
+{
+	switch (reg) {
+		PURE_EL2_SYSREG(  VPIDR_EL2	);
+		PURE_EL2_SYSREG(  VMPIDR_EL2	);
+		PURE_EL2_SYSREG(  ACTLR_EL2	);
+		PURE_EL2_SYSREG(  HCR_EL2	);
+		PURE_EL2_SYSREG(  MDCR_EL2	);
+		PURE_EL2_SYSREG(  HSTR_EL2	);
+		PURE_EL2_SYSREG(  HACR_EL2	);
+		PURE_EL2_SYSREG(  VTTBR_EL2	);
+		PURE_EL2_SYSREG(  VTCR_EL2	);
+		PURE_EL2_SYSREG(  RVBAR_EL2	);
+		PURE_EL2_SYSREG(  TPIDR_EL2	);
+		PURE_EL2_SYSREG(  HPFAR_EL2	);
+		PURE_EL2_SYSREG(  CNTHCTL_EL2	);
+		MAPPED_EL2_SYSREG(SCTLR_EL2,   SCTLR_EL1,
+				  translate_sctlr_el2_to_sctlr_el1	     );
+		MAPPED_EL2_SYSREG(CPTR_EL2,    CPACR_EL1,
+				  translate_cptr_el2_to_cpacr_el1	     );
+		MAPPED_EL2_SYSREG(TTBR0_EL2,   TTBR0_EL1,
+				  translate_ttbr0_el2_to_ttbr0_el1	     );
+		MAPPED_EL2_SYSREG(TTBR1_EL2,   TTBR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(TCR_EL2,     TCR_EL1,
+				  translate_tcr_el2_to_tcr_el1		     );
+		MAPPED_EL2_SYSREG(VBAR_EL2,    VBAR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AFSR0_EL2,   AFSR0_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(AFSR1_EL2,   AFSR1_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ESR_EL2,     ESR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(FAR_EL2,     FAR_EL1,     NULL	     );
+		MAPPED_EL2_SYSREG(MAIR_EL2,    MAIR_EL1,    NULL	     );
+		MAPPED_EL2_SYSREG(AMAIR_EL2,   AMAIR_EL1,   NULL	     );
+		MAPPED_EL2_SYSREG(ELR_EL2,     ELR_EL1,	    NULL	     );
+		MAPPED_EL2_SYSREG(SPSR_EL2,    SPSR_EL1,    NULL	     );
+	default:
+		return false;
+	}
 }
 
 u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
 {
 	u64 val = 0x8badf00d8badf00d;
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_read;
 
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_read_sys_reg_from_cpu(reg, &val))
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_read;
+
+		/*
+		 * If this register does not have an EL1 counterpart,
+		 * then read the stored EL2 version.
+		 */
+		if (reg == el1r)
+			goto memory_read;
+
+		/*
+		 * If we have a non-VHE guest and that the sysreg
+		 * requires translation to be used at EL1, use the
+		 * in-memory copy instead.
+		 */
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			goto memory_read;
+
+		/* Get the current version of the EL1 counterpart. */
+		WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val));
 		return val;
+	}
 
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_read;
+
+	if (__vcpu_read_sys_reg_from_cpu(reg, &val))
+		return val;
+
+memory_read:
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
 void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 {
-	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-	    __vcpu_write_sys_reg_to_cpu(val, reg))
+	u64 (*xlate)(u64) = NULL;
+	unsigned int el1r;
+
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
+		goto memory_write;
+
+	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
+		if (!is_hyp_ctxt(vcpu))
+			goto memory_write;
+
+		/*
+		 * Always store a copy of the write to memory to avoid having
+		 * to reverse-translate virtual EL2 system registers for a
+		 * non-VHE guest hypervisor.
+		 */
+		__vcpu_sys_reg(vcpu, reg) = val;
+
+		/* No EL1 counterpart? We're done here.? */
+		if (reg == el1r)
+			return;
+
+		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
+			val = xlate(val);
+
+		/* Redirect this to the EL1 version of the register. */
+		WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r));
+		return;
+	}
+
+	/* EL1 register can't be on the CPU if the guest is in vEL2. */
+	if (unlikely(is_hyp_ctxt(vcpu)))
+		goto memory_write;
+
+	if (__vcpu_write_sys_reg_to_cpu(val, reg))
 		return;
 
-	__vcpu_sys_reg(vcpu, reg) = val;
+memory_write:
+	 __vcpu_sys_reg(vcpu, reg) = val;
 }
 
 /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
@@ -207,7 +333,7 @@ static bool access_dcsw(struct kvm_vcpu *vcpu,
 	 * CPU left in the system, and certainly not from non-secure
 	 * software).
 	 */
-	if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+	if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
 		kvm_set_way_flush(vcpu);
 
 	return true;
@@ -379,7 +505,7 @@ static bool trap_loregion(struct kvm_vcpu *vcpu,
 			  struct sys_reg_params *p,
 			  const struct sys_reg_desc *r)
 {
-	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	u64 val = IDREG(vcpu->kvm, SYS_ID_AA64MMFR1_EL1);
 	u32 sr = reg_to_encoding(r);
 
 	if (!(val & (0xfUL << ID_AA64MMFR1_EL1_LO_SHIFT))) {
@@ -719,14 +845,9 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
 
 static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
-	u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX);
+	u64 mask = BIT(ARMV8_PMU_CYCLE_IDX);
+	u8 n = vcpu->kvm->arch.pmcr_n;
 
-	/* No PMU available, any PMU reg may UNDEF... */
-	if (!kvm_arm_support_pmu_v3())
-		return 0;
-
-	n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT;
-	n &= ARMV8_PMU_PMCR_N_MASK;
 	if (n)
 		mask |= GENMASK(n - 1, 0);
 
@@ -746,8 +867,12 @@ static u64 reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 
 static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
+	/* This thing will UNDEF, who cares about the reset value? */
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return 0;
+
 	reset_unknown(vcpu, r);
-	__vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_EVTYPE_MASK;
+	__vcpu_sys_reg(vcpu, r->reg) &= kvm_pmu_evtyper_mask(vcpu->kvm);
 
 	return __vcpu_sys_reg(vcpu, r->reg);
 }
@@ -762,17 +887,15 @@ static u64 reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 
 static u64 reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
-	u64 pmcr;
-
-	/* No PMU available, PMCR_EL0 may UNDEF... */
-	if (!kvm_arm_support_pmu_v3())
-		return 0;
+	u64 pmcr = 0;
 
-	/* Only preserve PMCR_EL0.N, and reset the rest to 0 */
-	pmcr = read_sysreg(pmcr_el0) & (ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT);
 	if (!kvm_supports_32bit_el0())
 		pmcr |= ARMV8_PMU_PMCR_LC;
 
+	/*
+	 * The value of PMCR.N field is included when the
+	 * vCPU register is read via kvm_vcpu_read_pmcr().
+	 */
 	__vcpu_sys_reg(vcpu, r->reg) = pmcr;
 
 	return __vcpu_sys_reg(vcpu, r->reg);
@@ -822,7 +945,7 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		 * Only update writeable bits of PMCR (continuing into
 		 * kvm_pmu_handle_pmcr() as well)
 		 */
-		val = __vcpu_sys_reg(vcpu, PMCR_EL0);
+		val = kvm_vcpu_read_pmcr(vcpu);
 		val &= ~ARMV8_PMU_PMCR_MASK;
 		val |= p->regval & ARMV8_PMU_PMCR_MASK;
 		if (!kvm_supports_32bit_el0())
@@ -830,7 +953,7 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		kvm_pmu_handle_pmcr(vcpu, val);
 	} else {
 		/* PMCR.P & PMCR.C are RAZ */
-		val = __vcpu_sys_reg(vcpu, PMCR_EL0)
+		val = kvm_vcpu_read_pmcr(vcpu)
 		      & ~(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C);
 		p->regval = val;
 	}
@@ -879,8 +1002,8 @@ static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
 {
 	u64 pmcr, val;
 
-	pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
-	val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	pmcr = kvm_vcpu_read_pmcr(vcpu);
+	val = FIELD_GET(ARMV8_PMU_PMCR_N, pmcr);
 	if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) {
 		kvm_inject_undefined(vcpu);
 		return false;
@@ -988,12 +1111,45 @@ static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		kvm_pmu_set_counter_event_type(vcpu, p->regval, idx);
 		kvm_vcpu_pmu_restore_guest(vcpu);
 	} else {
-		p->regval = __vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_MASK;
+		p->regval = __vcpu_sys_reg(vcpu, reg);
 	}
 
 	return true;
 }
 
+static int set_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 val)
+{
+	bool set;
+
+	val &= kvm_pmu_valid_counter_mask(vcpu);
+
+	switch (r->reg) {
+	case PMOVSSET_EL0:
+		/* CRm[1] being set indicates a SET register, and CLR otherwise */
+		set = r->CRm & 2;
+		break;
+	default:
+		/* Op2[0] being set indicates a SET register, and CLR otherwise */
+		set = r->Op2 & 1;
+		break;
+	}
+
+	if (set)
+		__vcpu_sys_reg(vcpu, r->reg) |= val;
+	else
+		__vcpu_sys_reg(vcpu, r->reg) &= ~val;
+
+	return 0;
+}
+
+static int get_pmreg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r, u64 *val)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	*val = __vcpu_sys_reg(vcpu, r->reg) & mask;
+	return 0;
+}
+
 static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
 {
@@ -1103,6 +1259,51 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	return true;
 }
 
+static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		    u64 *val)
+{
+	*val = kvm_vcpu_read_pmcr(vcpu);
+	return 0;
+}
+
+static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		    u64 val)
+{
+	u8 new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val);
+	struct kvm *kvm = vcpu->kvm;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	/*
+	 * The vCPU can't have more counters than the PMU hardware
+	 * implements. Ignore this error to maintain compatibility
+	 * with the existing KVM behavior.
+	 */
+	if (!kvm_vm_has_ran_once(kvm) &&
+	    new_n <= kvm_arm_pmu_get_max_counters(kvm))
+		kvm->arch.pmcr_n = new_n;
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	/*
+	 * Ignore writes to RES0 bits, read only bits that are cleared on
+	 * vCPU reset, and writable bits that KVM doesn't support yet.
+	 * (i.e. only PMCR.N and bits [7:0] are mutable from userspace)
+	 * The LP bit is RES0 when FEAT_PMUv3p5 is not supported on the vCPU.
+	 * But, we leave the bit as it is here, as the vCPU's PMUver might
+	 * be changed later (NOTE: the bit will be cleared on first vCPU run
+	 * if necessary).
+	 */
+	val &= ARMV8_PMU_PMCR_MASK;
+
+	/* The LC bit is RES1 when AArch32 is not supported */
+	if (!kvm_supports_32bit_el0())
+		val |= ARMV8_PMU_PMCR_LC;
+
+	__vcpu_sys_reg(vcpu, r->reg) = val;
+	return 0;
+}
+
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
 	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
@@ -1216,8 +1417,14 @@ static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp,
 	/* Some features have different safe value type in KVM than host features */
 	switch (id) {
 	case SYS_ID_AA64DFR0_EL1:
-		if (kvm_ftr.shift == ID_AA64DFR0_EL1_PMUVer_SHIFT)
+		switch (kvm_ftr.shift) {
+		case ID_AA64DFR0_EL1_PMUVer_SHIFT:
 			kvm_ftr.type = FTR_LOWER_SAFE;
+			break;
+		case ID_AA64DFR0_EL1_DebugVer_SHIFT:
+			kvm_ftr.type = FTR_LOWER_SAFE;
+			break;
+		}
 		break;
 	case SYS_ID_DFR0_EL1:
 		if (kvm_ftr.shift == ID_DFR0_EL1_PerfMon_SHIFT)
@@ -1228,7 +1435,7 @@ static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp,
 	return arm64_ftr_safe_value(&kvm_ftr, new, cur);
 }
 
-/**
+/*
  * arm64_check_features() - Check if a feature register value constitutes
  * a subset of features indicated by the idreg's KVM sanitised limit.
  *
@@ -1338,7 +1545,6 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 				 ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
 		if (!cpus_have_final_cap(ARM64_HAS_WFXT))
 			val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS);
 		break;
 	case SYS_ID_AA64MMFR2_EL1:
 		val &= ~ID_AA64MMFR2_EL1_CCIDX_MASK;
@@ -1373,6 +1579,13 @@ static inline bool is_id_reg(u32 id)
 		sys_reg_CRm(id) < 8);
 }
 
+static inline bool is_aa32_id_reg(u32 id)
+{
+	return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 &&
+		sys_reg_CRn(id) == 0 && sys_reg_CRm(id) >= 1 &&
+		sys_reg_CRm(id) <= 3);
+}
+
 static unsigned int id_visibility(const struct kvm_vcpu *vcpu,
 				  const struct sys_reg_desc *r)
 {
@@ -1418,8 +1631,6 @@ static bool access_id_reg(struct kvm_vcpu *vcpu,
 		return write_to_read_only(vcpu, p, r);
 
 	p->regval = read_id_reg(vcpu, r);
-	if (vcpu_has_nv(vcpu))
-		access_nested_id_reg(vcpu, p, r);
 
 	return true;
 }
@@ -1469,14 +1680,21 @@ static u64 read_sanitised_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
 	return val;
 }
 
+#define ID_REG_LIMIT_FIELD_ENUM(val, reg, field, limit)			       \
+({									       \
+	u64 __f_val = FIELD_GET(reg##_##field##_MASK, val);		       \
+	(val) &= ~reg##_##field##_MASK;					       \
+	(val) |= FIELD_PREP(reg##_##field##_MASK,			       \
+			min(__f_val, (u64)reg##_##field##_##limit));	       \
+	(val);								       \
+})
+
 static u64 read_sanitised_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
 					  const struct sys_reg_desc *rd)
 {
 	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
 
-	/* Limit debug to ARMv8.0 */
-	val &= ~ID_AA64DFR0_EL1_DebugVer_MASK;
-	val |= SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, DebugVer, IMP);
+	val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64DFR0_EL1, DebugVer, V8P8);
 
 	/*
 	 * Only initialize the PMU version if the vCPU was configured with one.
@@ -1496,6 +1714,7 @@ static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
 			       const struct sys_reg_desc *rd,
 			       u64 val)
 {
+	u8 debugver = SYS_FIELD_GET(ID_AA64DFR0_EL1, DebugVer, val);
 	u8 pmuver = SYS_FIELD_GET(ID_AA64DFR0_EL1, PMUVer, val);
 
 	/*
@@ -1515,6 +1734,13 @@ static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
 	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
 		val &= ~ID_AA64DFR0_EL1_PMUVer_MASK;
 
+	/*
+	 * ID_AA64DFR0_EL1.DebugVer is one of those awkward fields with a
+	 * nonzero minimum safe value.
+	 */
+	if (debugver < ID_AA64DFR0_EL1_DebugVer_IMP)
+		return -EINVAL;
+
 	return set_id_reg(vcpu, rd, val);
 }
 
@@ -1528,6 +1754,8 @@ static u64 read_sanitised_id_dfr0_el1(struct kvm_vcpu *vcpu,
 	if (kvm_vcpu_has_pmu(vcpu))
 		val |= SYS_FIELD_PREP(ID_DFR0_EL1, PerfMon, perfmon);
 
+	val = ID_REG_LIMIT_FIELD_ENUM(val, ID_DFR0_EL1, CopDbg, Debugv8p8);
+
 	return val;
 }
 
@@ -1536,6 +1764,7 @@ static int set_id_dfr0_el1(struct kvm_vcpu *vcpu,
 			   u64 val)
 {
 	u8 perfmon = SYS_FIELD_GET(ID_DFR0_EL1, PerfMon, val);
+	u8 copdbg = SYS_FIELD_GET(ID_DFR0_EL1, CopDbg, val);
 
 	if (perfmon == ID_DFR0_EL1_PerfMon_IMPDEF) {
 		val &= ~ID_DFR0_EL1_PerfMon_MASK;
@@ -1551,6 +1780,9 @@ static int set_id_dfr0_el1(struct kvm_vcpu *vcpu,
 	if (perfmon != 0 && perfmon < ID_DFR0_EL1_PerfMon_PMUv3)
 		return -EINVAL;
 
+	if (copdbg < ID_DFR0_EL1_CopDbg_Armv8)
+		return -EINVAL;
+
 	return set_id_reg(vcpu, rd, val);
 }
 
@@ -1777,6 +2009,32 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN;
 }
 
+static bool bad_vncr_trap(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * VNCR page, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of VNCR-backed register");
+}
+
+static bool bad_redir_trap(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	/*
+	 * We really shouldn't be here, and this is likely the result
+	 * of a misconfigured trap, as this register should target the
+	 * corresponding EL1, and nothing else.
+	 */
+	return bad_trap(vcpu, p, r,
+			"trap of EL2 register redirected to EL1");
+}
+
 #define EL2_REG(name, acc, rst, v) {		\
 	SYS_DESC(SYS_##name),			\
 	.access = acc,				\
@@ -1786,13 +2044,16 @@ static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
 	.val = v,				\
 }
 
+#define EL2_REG_VNCR(name, rst, v)	EL2_REG(name, bad_vncr_trap, rst, v)
+#define EL2_REG_REDIR(name, rst, v)	EL2_REG(name, bad_redir_trap, rst, v)
+
 /*
  * EL{0,1}2 registers are the EL2 view on an EL0 or EL1 register when
  * HCR_EL2.E2H==1, and only in the sysreg table for convenience of
  * handling traps. Given that, they are always hidden from userspace.
  */
-static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
-				    const struct sys_reg_desc *rd)
+static unsigned int hidden_user_visibility(const struct kvm_vcpu *vcpu,
+					   const struct sys_reg_desc *rd)
 {
 	return REG_HIDDEN_USER;
 }
@@ -1803,7 +2064,7 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
 	.reset = rst,				\
 	.reg = name##_EL1,			\
 	.val = v,				\
-	.visibility = elx2_visibility,		\
+	.visibility = hidden_user_visibility,	\
 }
 
 /*
@@ -1817,11 +2078,14 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
  * from userspace.
  */
 
-/* sys_reg_desc initialiser for known cpufeature ID registers */
-#define ID_SANITISED(name) {			\
+#define ID_DESC(name)				\
 	SYS_DESC(SYS_##name),			\
 	.access	= access_id_reg,		\
-	.get_user = get_id_reg,			\
+	.get_user = get_id_reg			\
+
+/* sys_reg_desc initialiser for known cpufeature ID registers */
+#define ID_SANITISED(name) {			\
+	ID_DESC(name),				\
 	.set_user = set_id_reg,			\
 	.visibility = id_visibility,		\
 	.reset = kvm_read_sanitised_id_reg,	\
@@ -1830,15 +2094,22 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
 
 /* sys_reg_desc initialiser for known cpufeature ID registers */
 #define AA32_ID_SANITISED(name) {		\
-	SYS_DESC(SYS_##name),			\
-	.access	= access_id_reg,		\
-	.get_user = get_id_reg,			\
+	ID_DESC(name),				\
 	.set_user = set_id_reg,			\
 	.visibility = aa32_id_visibility,	\
 	.reset = kvm_read_sanitised_id_reg,	\
 	.val = 0,				\
 }
 
+/* sys_reg_desc initialiser for writable ID registers */
+#define ID_WRITABLE(name, mask) {		\
+	ID_DESC(name),				\
+	.set_user = set_id_reg,			\
+	.visibility = id_visibility,		\
+	.reset = kvm_read_sanitised_id_reg,	\
+	.val = mask,				\
+}
+
 /*
  * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
  * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
@@ -1860,9 +2131,7 @@ static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
  * RAZ for the guest.
  */
 #define ID_HIDDEN(name) {			\
-	SYS_DESC(SYS_##name),			\
-	.access = access_id_reg,		\
-	.get_user = get_id_reg,			\
+	ID_DESC(name),				\
 	.set_user = set_id_reg,			\
 	.visibility = raz_visibility,		\
 	.reset = kvm_read_sanitised_id_reg,	\
@@ -1961,7 +2230,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	// DBGDTR[TR]X_EL0 share the same encoding
 	{ SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi },
 
-	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
+	{ SYS_DESC(SYS_DBGVCR32_EL2), trap_undef, reset_val, DBGVCR32_EL2, 0 },
 
 	{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
 
@@ -1980,7 +2249,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .set_user = set_id_dfr0_el1,
 	  .visibility = aa32_id_visibility,
 	  .reset = read_sanitised_id_dfr0_el1,
-	  .val = ID_DFR0_EL1_PerfMon_MASK, },
+	  .val = ID_DFR0_EL1_PerfMon_MASK |
+		 ID_DFR0_EL1_CopDbg_MASK, },
 	ID_HIDDEN(ID_AFR0_EL1),
 	AA32_ID_SANITISED(ID_MMFR0_EL1),
 	AA32_ID_SANITISED(ID_MMFR1_EL1),
@@ -2014,11 +2284,17 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .get_user = get_id_reg,
 	  .set_user = set_id_reg,
 	  .reset = read_sanitised_id_aa64pfr0_el1,
-	  .val = ID_AA64PFR0_EL1_CSV2_MASK | ID_AA64PFR0_EL1_CSV3_MASK, },
+	  .val = ~(ID_AA64PFR0_EL1_AMU |
+		   ID_AA64PFR0_EL1_MPAM |
+		   ID_AA64PFR0_EL1_SVE |
+		   ID_AA64PFR0_EL1_RAS |
+		   ID_AA64PFR0_EL1_GIC |
+		   ID_AA64PFR0_EL1_AdvSIMD |
+		   ID_AA64PFR0_EL1_FP), },
 	ID_SANITISED(ID_AA64PFR1_EL1),
 	ID_UNALLOCATED(4,2),
 	ID_UNALLOCATED(4,3),
-	ID_SANITISED(ID_AA64ZFR0_EL1),
+	ID_WRITABLE(ID_AA64ZFR0_EL1, ~ID_AA64ZFR0_EL1_RES0),
 	ID_HIDDEN(ID_AA64SMFR0_EL1),
 	ID_UNALLOCATED(4,6),
 	ID_UNALLOCATED(4,7),
@@ -2029,7 +2305,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .get_user = get_id_reg,
 	  .set_user = set_id_aa64dfr0_el1,
 	  .reset = read_sanitised_id_aa64dfr0_el1,
-	  .val = ID_AA64DFR0_EL1_PMUVer_MASK, },
+	  .val = ID_AA64DFR0_EL1_PMUVer_MASK |
+		 ID_AA64DFR0_EL1_DebugVer_MASK, },
 	ID_SANITISED(ID_AA64DFR1_EL1),
 	ID_UNALLOCATED(5,2),
 	ID_UNALLOCATED(5,3),
@@ -2039,9 +2316,14 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_UNALLOCATED(5,7),
 
 	/* CRm=6 */
-	ID_SANITISED(ID_AA64ISAR0_EL1),
-	ID_SANITISED(ID_AA64ISAR1_EL1),
-	ID_SANITISED(ID_AA64ISAR2_EL1),
+	ID_WRITABLE(ID_AA64ISAR0_EL1, ~ID_AA64ISAR0_EL1_RES0),
+	ID_WRITABLE(ID_AA64ISAR1_EL1, ~(ID_AA64ISAR1_EL1_GPI |
+					ID_AA64ISAR1_EL1_GPA |
+					ID_AA64ISAR1_EL1_API |
+					ID_AA64ISAR1_EL1_APA)),
+	ID_WRITABLE(ID_AA64ISAR2_EL1, ~(ID_AA64ISAR2_EL1_RES0 |
+					ID_AA64ISAR2_EL1_APA3 |
+					ID_AA64ISAR2_EL1_GPA3)),
 	ID_UNALLOCATED(6,3),
 	ID_UNALLOCATED(6,4),
 	ID_UNALLOCATED(6,5),
@@ -2049,9 +2331,23 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_UNALLOCATED(6,7),
 
 	/* CRm=7 */
-	ID_SANITISED(ID_AA64MMFR0_EL1),
-	ID_SANITISED(ID_AA64MMFR1_EL1),
-	ID_SANITISED(ID_AA64MMFR2_EL1),
+	ID_WRITABLE(ID_AA64MMFR0_EL1, ~(ID_AA64MMFR0_EL1_RES0 |
+					ID_AA64MMFR0_EL1_TGRAN4_2 |
+					ID_AA64MMFR0_EL1_TGRAN64_2 |
+					ID_AA64MMFR0_EL1_TGRAN16_2)),
+	ID_WRITABLE(ID_AA64MMFR1_EL1, ~(ID_AA64MMFR1_EL1_RES0 |
+					ID_AA64MMFR1_EL1_HCX |
+					ID_AA64MMFR1_EL1_XNX |
+					ID_AA64MMFR1_EL1_TWED |
+					ID_AA64MMFR1_EL1_XNX |
+					ID_AA64MMFR1_EL1_VH |
+					ID_AA64MMFR1_EL1_VMIDBits)),
+	ID_WRITABLE(ID_AA64MMFR2_EL1, ~(ID_AA64MMFR2_EL1_RES0 |
+					ID_AA64MMFR2_EL1_EVT |
+					ID_AA64MMFR2_EL1_FWB |
+					ID_AA64MMFR2_EL1_IDS |
+					ID_AA64MMFR2_EL1_NV |
+					ID_AA64MMFR2_EL1_CCIDX)),
 	ID_SANITISED(ID_AA64MMFR3_EL1),
 	ID_UNALLOCATED(7,4),
 	ID_UNALLOCATED(7,5),
@@ -2116,9 +2412,11 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	/* PMBIDR_EL1 is not trapped */
 
 	{ PMU_SYS_REG(PMINTENSET_EL1),
-	  .access = access_pminten, .reg = PMINTENSET_EL1 },
+	  .access = access_pminten, .reg = PMINTENSET_EL1,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 	{ PMU_SYS_REG(PMINTENCLR_EL1),
-	  .access = access_pminten, .reg = PMINTENSET_EL1 },
+	  .access = access_pminten, .reg = PMINTENSET_EL1,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 	{ SYS_DESC(SYS_PMMIR_EL1), trap_raz_wi },
 
 	{ SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 },
@@ -2166,14 +2464,17 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
 	{ SYS_DESC(SYS_SVCR), undef_access },
 
-	{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr,
-	  .reset = reset_pmcr, .reg = PMCR_EL0 },
+	{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,
+	  .reg = PMCR_EL0, .get_user = get_pmcr, .set_user = set_pmcr },
 	{ PMU_SYS_REG(PMCNTENSET_EL0),
-	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
+	  .access = access_pmcnten, .reg = PMCNTENSET_EL0,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 	{ PMU_SYS_REG(PMCNTENCLR_EL0),
-	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
+	  .access = access_pmcnten, .reg = PMCNTENSET_EL0,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 	{ PMU_SYS_REG(PMOVSCLR_EL0),
-	  .access = access_pmovs, .reg = PMOVSSET_EL0 },
+	  .access = access_pmovs, .reg = PMOVSSET_EL0,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 	/*
 	 * PM_SWINC_EL0 is exposed to userspace as RAZ/WI, as it was
 	 * previously (and pointlessly) advertised in the past...
@@ -2201,7 +2502,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(PMUSERENR_EL0), .access = access_pmuserenr,
 	  .reset = reset_val, .reg = PMUSERENR_EL0, .val = 0 },
 	{ PMU_SYS_REG(PMOVSSET_EL0),
-	  .access = access_pmovs, .reg = PMOVSSET_EL0 },
+	  .access = access_pmovs, .reg = PMOVSSET_EL0,
+	  .get_user = get_pmreg, .set_user = set_pmreg },
 
 	{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
 	{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
@@ -2359,41 +2661,52 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ PMU_SYS_REG(PMCCFILTR_EL0), .access = access_pmu_evtyper,
 	  .reset = reset_val, .reg = PMCCFILTR_EL0, .val = 0 },
 
-	EL2_REG(VPIDR_EL2, access_rw, reset_unknown, 0),
-	EL2_REG(VMPIDR_EL2, access_rw, reset_unknown, 0),
+	EL2_REG_VNCR(VPIDR_EL2, reset_unknown, 0),
+	EL2_REG_VNCR(VMPIDR_EL2, reset_unknown, 0),
 	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
 	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HCR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCR_EL2, reset_val, 0),
 	EL2_REG(MDCR_EL2, access_rw, reset_val, 0),
 	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
-	EL2_REG(HSTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HFGITR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HACR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HSTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HFGITR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HACR_EL2, reset_val, 0),
 
-	EL2_REG(HCRX_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(HCRX_EL2, reset_val, 0),
 
 	EL2_REG(TTBR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(TTBR1_EL2, access_rw, reset_val, 0),
 	EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1),
-	EL2_REG(VTTBR_EL2, access_rw, reset_val, 0),
-	EL2_REG(VTCR_EL2, access_rw, reset_val, 0),
-
-	{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
-	EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0),
-	EL2_REG(SPSR_EL2, access_rw, reset_val, 0),
-	EL2_REG(ELR_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(VTTBR_EL2, reset_val, 0),
+	EL2_REG_VNCR(VTCR_EL2, reset_val, 0),
+
+	{ SYS_DESC(SYS_DACR32_EL2), trap_undef, reset_unknown, DACR32_EL2 },
+	EL2_REG_VNCR(HDFGRTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HDFGWTR_EL2, reset_val, 0),
+	EL2_REG_VNCR(HAFGRTR_EL2, reset_val, 0),
+	EL2_REG_REDIR(SPSR_EL2, reset_val, 0),
+	EL2_REG_REDIR(ELR_EL2, reset_val, 0),
 	{ SYS_DESC(SYS_SP_EL1), access_sp_el1},
 
-	{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
+	/* AArch32 SPSR_* are RES0 if trapped from a NV guest */
+	{ SYS_DESC(SYS_SPSR_irq), .access = trap_raz_wi,
+	  .visibility = hidden_user_visibility },
+	{ SYS_DESC(SYS_SPSR_abt), .access = trap_raz_wi,
+	  .visibility = hidden_user_visibility },
+	{ SYS_DESC(SYS_SPSR_und), .access = trap_raz_wi,
+	  .visibility = hidden_user_visibility },
+	{ SYS_DESC(SYS_SPSR_fiq), .access = trap_raz_wi,
+	  .visibility = hidden_user_visibility },
+
+	{ SYS_DESC(SYS_IFSR32_EL2), trap_undef, reset_unknown, IFSR32_EL2 },
 	EL2_REG(AFSR0_EL2, access_rw, reset_val, 0),
 	EL2_REG(AFSR1_EL2, access_rw, reset_val, 0),
-	EL2_REG(ESR_EL2, access_rw, reset_val, 0),
-	{ SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x700 },
+	EL2_REG_REDIR(ESR_EL2, reset_val, 0),
+	{ SYS_DESC(SYS_FPEXC32_EL2), trap_undef, reset_val, FPEXC32_EL2, 0x700 },
 
-	EL2_REG(FAR_EL2, access_rw, reset_val, 0),
+	EL2_REG_REDIR(FAR_EL2, reset_val, 0),
 	EL2_REG(HPFAR_EL2, access_rw, reset_val, 0),
 
 	EL2_REG(MAIR_EL2, access_rw, reset_val, 0),
@@ -2406,24 +2719,9 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0),
 	EL2_REG(TPIDR_EL2, access_rw, reset_val, 0),
 
-	EL2_REG(CNTVOFF_EL2, access_rw, reset_val, 0),
+	EL2_REG_VNCR(CNTVOFF_EL2, reset_val, 0),
 	EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0),
 
-	EL12_REG(SCTLR, access_vm_reg, reset_val, 0x00C50078),
-	EL12_REG(CPACR, access_rw, reset_val, 0),
-	EL12_REG(TTBR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TTBR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(TCR, access_vm_reg, reset_val, 0),
-	{ SYS_DESC(SYS_SPSR_EL12), access_spsr},
-	{ SYS_DESC(SYS_ELR_EL12), access_elr},
-	EL12_REG(AFSR0, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AFSR1, access_vm_reg, reset_unknown, 0),
-	EL12_REG(ESR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(FAR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(MAIR, access_vm_reg, reset_unknown, 0),
-	EL12_REG(AMAIR, access_vm_reg, reset_amair_el1, 0),
-	EL12_REG(VBAR, access_rw, reset_val, 0),
-	EL12_REG(CONTEXTIDR, access_vm_reg, reset_val, 0),
 	EL12_REG(CNTKCTL, access_rw, reset_val, 0),
 
 	EL2_REG(SP_EL2, NULL, reset_unknown, 0),
@@ -2438,14 +2736,15 @@ static bool trap_dbgdidr(struct kvm_vcpu *vcpu,
 	if (p->is_write) {
 		return ignore_write(vcpu, p);
 	} else {
-		u64 dfr = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
-		u64 pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
-		u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL1_EL3_SHIFT);
-
-		p->regval = ((((dfr >> ID_AA64DFR0_EL1_WRPs_SHIFT) & 0xf) << 28) |
-			     (((dfr >> ID_AA64DFR0_EL1_BRPs_SHIFT) & 0xf) << 24) |
-			     (((dfr >> ID_AA64DFR0_EL1_CTX_CMPs_SHIFT) & 0xf) << 20)
-			     | (6 << 16) | (1 << 15) | (el3 << 14) | (el3 << 12));
+		u64 dfr = IDREG(vcpu->kvm, SYS_ID_AA64DFR0_EL1);
+		u64 pfr = IDREG(vcpu->kvm, SYS_ID_AA64PFR0_EL1);
+		u32 el3 = !!SYS_FIELD_GET(ID_AA64PFR0_EL1, EL3, pfr);
+
+		p->regval = ((SYS_FIELD_GET(ID_AA64DFR0_EL1, WRPs, dfr) << 28) |
+			     (SYS_FIELD_GET(ID_AA64DFR0_EL1, BRPs, dfr) << 24) |
+			     (SYS_FIELD_GET(ID_AA64DFR0_EL1, CTX_CMPs, dfr) << 20) |
+			     (SYS_FIELD_GET(ID_AA64DFR0_EL1, DebugVer, dfr) << 16) |
+			     (1 << 15) | (el3 << 14) | (el3 << 12));
 		return true;
 	}
 }
@@ -3572,6 +3871,65 @@ int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 	return write_demux_regids(uindices);
 }
 
+#define KVM_ARM_FEATURE_ID_RANGE_INDEX(r)			\
+	KVM_ARM_FEATURE_ID_RANGE_IDX(sys_reg_Op0(r),		\
+		sys_reg_Op1(r),					\
+		sys_reg_CRn(r),					\
+		sys_reg_CRm(r),					\
+		sys_reg_Op2(r))
+
+static bool is_feature_id_reg(u32 encoding)
+{
+	return (sys_reg_Op0(encoding) == 3 &&
+		(sys_reg_Op1(encoding) < 2 || sys_reg_Op1(encoding) == 3) &&
+		sys_reg_CRn(encoding) == 0 &&
+		sys_reg_CRm(encoding) <= 7);
+}
+
+int kvm_vm_ioctl_get_reg_writable_masks(struct kvm *kvm, struct reg_mask_range *range)
+{
+	const void *zero_page = page_to_virt(ZERO_PAGE(0));
+	u64 __user *masks = (u64 __user *)range->addr;
+
+	/* Only feature id range is supported, reserved[13] must be zero. */
+	if (range->range ||
+	    memcmp(range->reserved, zero_page, sizeof(range->reserved)))
+		return -EINVAL;
+
+	/* Wipe the whole thing first */
+	if (clear_user(masks, KVM_ARM_FEATURE_ID_RANGE_SIZE * sizeof(__u64)))
+		return -EFAULT;
+
+	for (int i = 0; i < ARRAY_SIZE(sys_reg_descs); i++) {
+		const struct sys_reg_desc *reg = &sys_reg_descs[i];
+		u32 encoding = reg_to_encoding(reg);
+		u64 val;
+
+		if (!is_feature_id_reg(encoding) || !reg->set_user)
+			continue;
+
+		/*
+		 * For ID registers, we return the writable mask. Other feature
+		 * registers return a full 64bit mask. That's not necessary
+		 * compliant with a given revision of the architecture, but the
+		 * RES0/RES1 definitions allow us to do that.
+		 */
+		if (is_id_reg(encoding)) {
+			if (!reg->val ||
+			    (is_aa32_id_reg(encoding) && !kvm_supports_32bit_el0()))
+				continue;
+			val = reg->val;
+		} else {
+			val = ~0UL;
+		}
+
+		if (put_user(val, (masks + KVM_ARM_FEATURE_ID_RANGE_INDEX(encoding))))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
 int __init kvm_sys_reg_table_init(void)
 {
 	struct sys_reg_params params;
diff --git a/arch/arm64/kvm/trace_arm.h b/arch/arm64/kvm/trace_arm.h
index 8ad531049..c18c1a958 100644
--- a/arch/arm64/kvm/trace_arm.h
+++ b/arch/arm64/kvm/trace_arm.h
@@ -136,6 +136,31 @@ TRACE_EVENT(kvm_mmio_emulate,
 		  __entry->vcpu_pc, __entry->instr, __entry->cpsr)
 );
 
+TRACE_EVENT(kvm_mmio_nisv,
+	TP_PROTO(unsigned long vcpu_pc, unsigned long esr,
+		 unsigned long far, unsigned long ipa),
+	TP_ARGS(vcpu_pc, esr, far, ipa),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_pc		)
+		__field(	unsigned long,	esr		)
+		__field(	unsigned long,	far		)
+		__field(	unsigned long,	ipa		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc		= vcpu_pc;
+		__entry->esr			= esr;
+		__entry->far			= far;
+		__entry->ipa			= ipa;
+	),
+
+	TP_printk("ipa %#016lx, esr %#016lx, far %#016lx, pc %#016lx",
+		  __entry->ipa, __entry->esr,
+		  __entry->far, __entry->vcpu_pc)
+);
+
+
 TRACE_EVENT(kvm_set_way_flush,
 	    TP_PROTO(unsigned long vcpu_pc, bool cache),
 	    TP_ARGS(vcpu_pc, cache),
diff --git a/arch/arm64/kvm/vgic/vgic-debug.c b/arch/arm64/kvm/vgic/vgic-debug.c
index 07aa04371..85606a531 100644
--- a/arch/arm64/kvm/vgic/vgic-debug.c
+++ b/arch/arm64/kvm/vgic/vgic-debug.c
@@ -166,7 +166,7 @@ static void print_header(struct seq_file *s, struct vgic_irq *irq,
 
 	if (vcpu) {
 		hdr = "VCPU";
-		id = vcpu->vcpu_id;
+		id = vcpu->vcpu_idx;
 	}
 
 	seq_printf(s, "\n");
@@ -212,7 +212,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 		      "     %2d "
 		      "\n",
 			type, irq->intid,
-			(irq->target_vcpu) ? irq->target_vcpu->vcpu_id : -1,
+			(irq->target_vcpu) ? irq->target_vcpu->vcpu_idx : -1,
 			pending,
 			irq->line_level,
 			irq->active,
@@ -224,7 +224,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
 			irq->mpidr,
 			irq->source,
 			irq->priority,
-			(irq->vcpu) ? irq->vcpu->vcpu_id : -1);
+			(irq->vcpu) ? irq->vcpu->vcpu_idx : -1);
 }
 
 static int vgic_debug_show(struct seq_file *s, void *v)
diff --git a/arch/arm64/kvm/vgic/vgic-irqfd.c b/arch/arm64/kvm/vgic/vgic-irqfd.c
index 475059bac..8c711deb2 100644
--- a/arch/arm64/kvm/vgic/vgic-irqfd.c
+++ b/arch/arm64/kvm/vgic/vgic-irqfd.c
@@ -23,7 +23,7 @@ static int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,
 
 	if (!vgic_valid_spi(kvm, spi_id))
 		return -EINVAL;
-	return kvm_vgic_inject_irq(kvm, 0, spi_id, level, NULL);
+	return kvm_vgic_inject_irq(kvm, NULL, spi_id, level, NULL);
 }
 
 /**
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index c42072354..28a93074e 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -378,6 +378,12 @@ static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu)
 	return ret;
 }
 
+static struct kvm_vcpu *collection_to_vcpu(struct kvm *kvm,
+					   struct its_collection *col)
+{
+	return kvm_get_vcpu_by_id(kvm, col->target_addr);
+}
+
 /*
  * Promotes the ITS view of affinity of an ITTE (which redistributor this LPI
  * is targeting) to the VGIC's view, which deals with target VCPUs.
@@ -391,7 +397,7 @@ static void update_affinity_ite(struct kvm *kvm, struct its_ite *ite)
 	if (!its_is_collection_mapped(ite->collection))
 		return;
 
-	vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr);
+	vcpu = collection_to_vcpu(kvm, ite->collection);
 	update_affinity(ite->irq, vcpu);
 }
 
@@ -462,6 +468,9 @@ static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
 		}
 
 		irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
+
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 		irq->pending_latch = pendmask & (1U << bit_nr);
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -683,7 +692,7 @@ int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its,
 	if (!ite || !its_is_collection_mapped(ite->collection))
 		return E_ITS_INT_UNMAPPED_INTERRUPT;
 
-	vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr);
+	vcpu = collection_to_vcpu(kvm, ite->collection);
 	if (!vcpu)
 		return E_ITS_INT_UNMAPPED_INTERRUPT;
 
@@ -892,7 +901,7 @@ static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its,
 		return E_ITS_MOVI_UNMAPPED_COLLECTION;
 
 	ite->collection = collection;
-	vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+	vcpu = collection_to_vcpu(kvm, collection);
 
 	vgic_its_invalidate_cache(kvm);
 
@@ -1126,7 +1135,7 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its,
 	}
 
 	if (its_is_collection_mapped(collection))
-		vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+		vcpu = collection_to_vcpu(kvm, collection);
 
 	irq = vgic_add_lpi(kvm, lpi_nr, vcpu);
 	if (IS_ERR(irq)) {
@@ -1247,21 +1256,22 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its,
 				    u64 *its_cmd)
 {
 	u16 coll_id;
-	u32 target_addr;
 	struct its_collection *collection;
 	bool valid;
 
 	valid = its_cmd_get_validbit(its_cmd);
 	coll_id = its_cmd_get_collection(its_cmd);
-	target_addr = its_cmd_get_target_addr(its_cmd);
-
-	if (target_addr >= atomic_read(&kvm->online_vcpus))
-		return E_ITS_MAPC_PROCNUM_OOR;
 
 	if (!valid) {
 		vgic_its_free_collection(its, coll_id);
 		vgic_its_invalidate_cache(kvm);
 	} else {
+		struct kvm_vcpu *vcpu;
+
+		vcpu = kvm_get_vcpu_by_id(kvm, its_cmd_get_target_addr(its_cmd));
+		if (!vcpu)
+			return E_ITS_MAPC_PROCNUM_OOR;
+
 		collection = find_collection(its, coll_id);
 
 		if (!collection) {
@@ -1275,9 +1285,9 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its,
 							coll_id);
 			if (ret)
 				return ret;
-			collection->target_addr = target_addr;
+			collection->target_addr = vcpu->vcpu_id;
 		} else {
-			collection->target_addr = target_addr;
+			collection->target_addr = vcpu->vcpu_id;
 			update_affinity_collection(kvm, its, collection);
 		}
 	}
@@ -1387,7 +1397,7 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,
 	if (!its_is_collection_mapped(collection))
 		return E_ITS_INVALL_UNMAPPED_COLLECTION;
 
-	vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+	vcpu = collection_to_vcpu(kvm, collection);
 	vgic_its_invall(vcpu);
 
 	return 0;
@@ -1404,29 +1414,29 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,
 static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its,
 				      u64 *its_cmd)
 {
-	u32 target1_addr = its_cmd_get_target_addr(its_cmd);
-	u32 target2_addr = its_cmd_mask_field(its_cmd, 3, 16, 32);
 	struct kvm_vcpu *vcpu1, *vcpu2;
 	struct vgic_irq *irq;
 	u32 *intids;
 	int irq_count, i;
 
-	if (target1_addr >= atomic_read(&kvm->online_vcpus) ||
-	    target2_addr >= atomic_read(&kvm->online_vcpus))
+	/* We advertise GITS_TYPER.PTA==0, making the address the vcpu ID */
+	vcpu1 = kvm_get_vcpu_by_id(kvm, its_cmd_get_target_addr(its_cmd));
+	vcpu2 = kvm_get_vcpu_by_id(kvm, its_cmd_mask_field(its_cmd, 3, 16, 32));
+
+	if (!vcpu1 || !vcpu2)
 		return E_ITS_MOVALL_PROCNUM_OOR;
 
-	if (target1_addr == target2_addr)
+	if (vcpu1 == vcpu2)
 		return 0;
 
-	vcpu1 = kvm_get_vcpu(kvm, target1_addr);
-	vcpu2 = kvm_get_vcpu(kvm, target2_addr);
-
 	irq_count = vgic_copy_lpi_list(kvm, vcpu1, &intids);
 	if (irq_count < 0)
 		return irq_count;
 
 	for (i = 0; i < irq_count; i++) {
 		irq = vgic_get_irq(kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
 
 		update_affinity(irq, vcpu2);
 
@@ -2263,7 +2273,7 @@ static int vgic_its_restore_ite(struct vgic_its *its, u32 event_id,
 		return PTR_ERR(ite);
 
 	if (its_is_collection_mapped(collection))
-		vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+		vcpu = kvm_get_vcpu_by_id(kvm, collection->target_addr);
 
 	irq = vgic_add_lpi(kvm, lpi_id, vcpu);
 	if (IS_ERR(irq)) {
@@ -2578,7 +2588,7 @@ static int vgic_its_restore_cte(struct vgic_its *its, gpa_t gpa, int esz)
 	coll_id = val & KVM_ITS_CTE_ICID_MASK;
 
 	if (target_addr != COLLECTION_NOT_MAPPED &&
-	    target_addr >= atomic_read(&kvm->online_vcpus))
+	    !kvm_get_vcpu_by_id(kvm, target_addr))
 		return -EINVAL;
 
 	collection = find_collection(its, coll_id);
diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c
index 212b73a71..1d26bb5b0 100644
--- a/arch/arm64/kvm/vgic/vgic-kvm-device.c
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -27,7 +27,8 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,
 	if (addr + size < addr)
 		return -EINVAL;
 
-	if (addr & ~kvm_phys_mask(kvm) || addr + size > kvm_phys_size(kvm))
+	if (addr & ~kvm_phys_mask(&kvm->arch.mmu) ||
+	    (addr + size) > kvm_phys_size(&kvm->arch.mmu))
 		return -E2BIG;
 
 	return 0;
@@ -337,16 +338,12 @@ int kvm_register_vgic_device(unsigned long type)
 int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
 		       struct vgic_reg_attr *reg_attr)
 {
-	int cpuid;
+	int cpuid = FIELD_GET(KVM_DEV_ARM_VGIC_CPUID_MASK, attr->attr);
 
-	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
-		 KVM_DEV_ARM_VGIC_CPUID_SHIFT;
-
-	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
-		return -EINVAL;
-
-	reg_attr->vcpu = kvm_get_vcpu(dev->kvm, cpuid);
 	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
+	reg_attr->vcpu = kvm_get_vcpu_by_id(dev->kvm, cpuid);
+	if (!reg_attr->vcpu)
+		return -EINVAL;
 
 	return 0;
 }
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index ae5a3a717..c15ee1df0 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -357,38 +357,13 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
 					 gpa_t addr, unsigned int len,
 					 unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for (i = 0; i < len * 8; i++) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-
-		/*
-		 * pending_latch is set irrespective of irq type
-		 * (level or edge) to avoid dependency that VM should
-		 * restore irq config before pending info.
-		 */
-		irq->pending_latch = test_bit(i, &val);
-
-		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
-			irq_set_irqchip_state(irq->host_irq,
-					      IRQCHIP_STATE_PENDING,
-					      irq->pending_latch);
-			irq->pending_latch = false;
-		}
-
-		if (irq->pending_latch)
-			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-		else
-			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	int ret;
 
-		vgic_put_irq(vcpu->kvm, irq);
-	}
+	ret = vgic_uaccess_write_spending(vcpu, addr, len, val);
+	if (ret)
+		return ret;
 
-	return 0;
+	return vgic_uaccess_write_cpending(vcpu, addr, len, ~val);
 }
 
 /* We want to avoid outer shareable. */
@@ -840,6 +815,8 @@ static int vgic_register_all_redist_iodevs(struct kvm *kvm)
 	unsigned long c;
 	int ret = 0;
 
+	lockdep_assert_held(&kvm->slots_lock);
+
 	kvm_for_each_vcpu(c, vcpu, kvm) {
 		ret = vgic_register_redist_iodev(vcpu);
 		if (ret)
@@ -1020,35 +997,6 @@ int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
 
 	return 0;
 }
-/*
- * Compare a given affinity (level 1-3 and a level 0 mask, from the SGI
- * generation register ICC_SGI1R_EL1) with a given VCPU.
- * If the VCPU's MPIDR matches, return the level0 affinity, otherwise
- * return -1.
- */
-static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu)
-{
-	unsigned long affinity;
-	int level0;
-
-	/*
-	 * Split the current VCPU's MPIDR into affinity level 0 and the
-	 * rest as this is what we have to compare against.
-	 */
-	affinity = kvm_vcpu_get_mpidr_aff(vcpu);
-	level0 = MPIDR_AFFINITY_LEVEL(affinity, 0);
-	affinity &= ~MPIDR_LEVEL_MASK;
-
-	/* bail out if the upper three levels don't match */
-	if (sgi_aff != affinity)
-		return -1;
-
-	/* Is this VCPU's bit set in the mask ? */
-	if (!(sgi_cpu_mask & BIT(level0)))
-		return -1;
-
-	return level0;
-}
 
 /*
  * The ICC_SGI* registers encode the affinity differently from the MPIDR,
@@ -1059,6 +1007,38 @@ static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu)
 	((((reg) & ICC_SGI1R_AFFINITY_## level ##_MASK) \
 	>> ICC_SGI1R_AFFINITY_## level ##_SHIFT) << MPIDR_LEVEL_SHIFT(level))
 
+static void vgic_v3_queue_sgi(struct kvm_vcpu *vcpu, u32 sgi, bool allow_group1)
+{
+	struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, sgi);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+	/*
+	 * An access targeting Group0 SGIs can only generate
+	 * those, while an access targeting Group1 SGIs can
+	 * generate interrupts of either group.
+	 */
+	if (!irq->group || allow_group1) {
+		if (!irq->hw) {
+			irq->pending_latch = true;
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		} else {
+			/* HW SGI? Ask the GIC to inject it */
+			int err;
+			err = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    true);
+			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		}
+	} else {
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	}
+
+	vgic_put_irq(vcpu->kvm, irq);
+}
+
 /**
  * vgic_v3_dispatch_sgi - handle SGI requests from VCPUs
  * @vcpu: The VCPU requesting a SGI
@@ -1069,83 +1049,46 @@ static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu)
  * This will trap in sys_regs.c and call this function.
  * This ICC_SGI1R_EL1 register contains the upper three affinity levels of the
  * target processors as well as a bitmask of 16 Aff0 CPUs.
- * If the interrupt routing mode bit is not set, we iterate over all VCPUs to
- * check for matching ones. If this bit is set, we signal all, but not the
- * calling VCPU.
+ *
+ * If the interrupt routing mode bit is not set, we iterate over the Aff0
+ * bits and signal the VCPUs matching the provided Aff{3,2,1}.
+ *
+ * If this bit is set, we signal all, but not the calling VCPU.
  */
 void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1)
 {
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_vcpu *c_vcpu;
-	u16 target_cpus;
+	unsigned long target_cpus;
 	u64 mpidr;
-	int sgi;
-	int vcpu_id = vcpu->vcpu_id;
-	bool broadcast;
-	unsigned long c, flags;
-
-	sgi = (reg & ICC_SGI1R_SGI_ID_MASK) >> ICC_SGI1R_SGI_ID_SHIFT;
-	broadcast = reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT);
-	target_cpus = (reg & ICC_SGI1R_TARGET_LIST_MASK) >> ICC_SGI1R_TARGET_LIST_SHIFT;
-	mpidr = SGI_AFFINITY_LEVEL(reg, 3);
-	mpidr |= SGI_AFFINITY_LEVEL(reg, 2);
-	mpidr |= SGI_AFFINITY_LEVEL(reg, 1);
-
-	/*
-	 * We iterate over all VCPUs to find the MPIDRs matching the request.
-	 * If we have handled one CPU, we clear its bit to detect early
-	 * if we are already finished. This avoids iterating through all
-	 * VCPUs when most of the times we just signal a single VCPU.
-	 */
-	kvm_for_each_vcpu(c, c_vcpu, kvm) {
-		struct vgic_irq *irq;
-
-		/* Exit early if we have dealt with all requested CPUs */
-		if (!broadcast && target_cpus == 0)
-			break;
-
-		/* Don't signal the calling VCPU */
-		if (broadcast && c == vcpu_id)
-			continue;
+	u32 sgi, aff0;
+	unsigned long c;
 
-		if (!broadcast) {
-			int level0;
+	sgi = FIELD_GET(ICC_SGI1R_SGI_ID_MASK, reg);
 
-			level0 = match_mpidr(mpidr, target_cpus, c_vcpu);
-			if (level0 == -1)
+	/* Broadcast */
+	if (unlikely(reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT))) {
+		kvm_for_each_vcpu(c, c_vcpu, kvm) {
+			/* Don't signal the calling VCPU */
+			if (c_vcpu == vcpu)
 				continue;
 
-			/* remove this matching VCPU from the mask */
-			target_cpus &= ~BIT(level0);
+			vgic_v3_queue_sgi(c_vcpu, sgi, allow_group1);
 		}
 
-		irq = vgic_get_irq(vcpu->kvm, c_vcpu, sgi);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		return;
+	}
 
-		/*
-		 * An access targeting Group0 SGIs can only generate
-		 * those, while an access targeting Group1 SGIs can
-		 * generate interrupts of either group.
-		 */
-		if (!irq->group || allow_group1) {
-			if (!irq->hw) {
-				irq->pending_latch = true;
-				vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-			} else {
-				/* HW SGI? Ask the GIC to inject it */
-				int err;
-				err = irq_set_irqchip_state(irq->host_irq,
-							    IRQCHIP_STATE_PENDING,
-							    true);
-				WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
-				raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-			}
-		} else {
-			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-		}
+	/* We iterate over affinities to find the corresponding vcpus */
+	mpidr = SGI_AFFINITY_LEVEL(reg, 3);
+	mpidr |= SGI_AFFINITY_LEVEL(reg, 2);
+	mpidr |= SGI_AFFINITY_LEVEL(reg, 1);
+	target_cpus = FIELD_GET(ICC_SGI1R_TARGET_LIST_MASK, reg);
 
-		vgic_put_irq(vcpu->kvm, irq);
+	for_each_set_bit(aff0, &target_cpus, hweight_long(ICC_SGI1R_TARGET_LIST_MASK)) {
+		c_vcpu = kvm_mpidr_to_vcpu(kvm, mpidr | aff0);
+		if (c_vcpu)
+			vgic_v3_queue_sgi(c_vcpu, sgi, allow_group1);
 	}
 }
 
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index ff558c05e..cf76523a2 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -301,9 +301,8 @@ static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2);
 }
 
-void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __set_pending(struct kvm_vcpu *vcpu, gpa_t addr, unsigned int len,
+			  unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -312,14 +311,22 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ISPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ISPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * GICv2 SGIs are terribly broken. We can't restore
+		 * the source of the interrupt, so just pick the vcpu
+		 * itself as the source...
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source |= BIT(vcpu->vcpu_id);
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to inject it */
 			int err;
@@ -335,7 +342,7 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 		}
 
 		irq->pending_latch = true;
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_irq_set_phys_active(irq, true);
 
 		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
@@ -343,33 +350,18 @@ void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__set_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		irq->pending_latch = true;
-
-		/*
-		 * GICv2 SGIs are terribly broken. We can't restore
-		 * the source of the interrupt, so just pick the vcpu
-		 * itself as the source...
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source |= BIT(vcpu->vcpu_id);
-
-		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__set_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
@@ -394,9 +386,9 @@ static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
 		vgic_irq_set_phys_active(irq, false);
 }
 
-void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
-			      gpa_t addr, unsigned int len,
-			      unsigned long val)
+static void __clear_pending(struct kvm_vcpu *vcpu,
+			    gpa_t addr, unsigned int len,
+			    unsigned long val, bool is_user)
 {
 	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
 	int i;
@@ -405,14 +397,22 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	for_each_set_bit(i, &val, len * 8) {
 		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
 
-		/* GICD_ICPENDR0 SGI bits are WI */
-		if (is_vgic_v2_sgi(vcpu, irq)) {
+		/* GICD_ICPENDR0 SGI bits are WI when written from the guest. */
+		if (is_vgic_v2_sgi(vcpu, irq) && !is_user) {
 			vgic_put_irq(vcpu->kvm, irq);
 			continue;
 		}
 
 		raw_spin_lock_irqsave(&irq->irq_lock, flags);
 
+		/*
+		 * More fun with GICv2 SGIs! If we're clearing one of them
+		 * from userspace, which source vcpu to clear? Let's not
+		 * even think of it, and blow the whole set.
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source = 0;
+
 		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
 			/* HW SGI? Ask the GIC to clear its pending bit */
 			int err;
@@ -427,7 +427,7 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 			continue;
 		}
 
-		if (irq->hw)
+		if (irq->hw && !is_user)
 			vgic_hw_irq_cpending(vcpu, irq);
 		else
 			irq->pending_latch = false;
@@ -437,33 +437,18 @@ void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
 	}
 }
 
+void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	__clear_pending(vcpu, addr, len, val, false);
+}
+
 int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
 				gpa_t addr, unsigned int len,
 				unsigned long val)
 {
-	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
-	int i;
-	unsigned long flags;
-
-	for_each_set_bit(i, &val, len * 8) {
-		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
-
-		raw_spin_lock_irqsave(&irq->irq_lock, flags);
-		/*
-		 * More fun with GICv2 SGIs! If we're clearing one of them
-		 * from userspace, which source vcpu to clear? Let's not
-		 * even think of it, and blow the whole set.
-		 */
-		if (is_vgic_v2_sgi(vcpu, irq))
-			irq->source = 0;
-
-		irq->pending_latch = false;
-
-		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
-
-		vgic_put_irq(vcpu->kvm, irq);
-	}
-
+	__clear_pending(vcpu, addr, len, val, true);
 	return 0;
 }
 
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
index 3dfc8b84e..9465d3706 100644
--- a/arch/arm64/kvm/vgic/vgic-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -684,7 +684,7 @@ int vgic_v3_probe(const struct gic_kvm_info *info)
 	if (kvm_vgic_global_state.vcpu_base == 0)
 		kvm_info("disabling GICv2 emulation\n");
 
-	if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_30115)) {
+	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_30115)) {
 		group0_trap = true;
 		group1_trap = true;
 	}
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index 339a55194..74a67ad87 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -436,6 +436,10 @@ int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
 	if (ret)
 		goto out;
 
+	/* Silently exit if the vLPI is already mapped */
+	if (irq->hw)
+		goto out;
+
 	/*
 	 * Emit the mapping request. If it fails, the ITS probably
 	 * isn't v4 compatible, so let's silently bail out. Holding
diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
index 8be4c1ebd..db2a95762 100644
--- a/arch/arm64/kvm/vgic/vgic.c
+++ b/arch/arm64/kvm/vgic/vgic.c
@@ -422,7 +422,7 @@ retry:
 /**
  * kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic
  * @kvm:     The VM structure pointer
- * @cpuid:   The CPU for PPIs
+ * @vcpu:    The CPU for PPIs or NULL for global interrupts
  * @intid:   The INTID to inject a new state to.
  * @level:   Edge-triggered:  true:  to trigger the interrupt
  *			      false: to ignore the call
@@ -436,24 +436,22 @@ retry:
  * level-sensitive interrupts.  You can think of the level parameter as 1
  * being HIGH and 0 being LOW and all devices being active-HIGH.
  */
-int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
-			bool level, void *owner)
+int kvm_vgic_inject_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
+			unsigned int intid, bool level, void *owner)
 {
-	struct kvm_vcpu *vcpu;
 	struct vgic_irq *irq;
 	unsigned long flags;
 	int ret;
 
-	trace_vgic_update_irq_pending(cpuid, intid, level);
-
 	ret = vgic_lazy_init(kvm);
 	if (ret)
 		return ret;
 
-	vcpu = kvm_get_vcpu(kvm, cpuid);
 	if (!vcpu && intid < VGIC_NR_PRIVATE_IRQS)
 		return -EINVAL;
 
+	trace_vgic_update_irq_pending(vcpu ? vcpu->vcpu_idx : 0, intid, level);
+
 	irq = vgic_get_irq(kvm, vcpu, intid);
 	if (!irq)
 		return -EINVAL;
diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c
index 7fe8ba1a2..806223b70 100644
--- a/arch/arm64/kvm/vmid.c
+++ b/arch/arm64/kvm/vmid.c
@@ -135,10 +135,11 @@ void kvm_arm_vmid_clear_active(void)
 	atomic64_set(this_cpu_ptr(&active_vmids), VMID_ACTIVE_INVALID);
 }
 
-void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
+bool kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
 {
 	unsigned long flags;
 	u64 vmid, old_active_vmid;
+	bool updated = false;
 
 	vmid = atomic64_read(&kvm_vmid->id);
 
@@ -156,17 +157,21 @@ void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
 	if (old_active_vmid != 0 && vmid_gen_match(vmid) &&
 	    0 != atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_vmids),
 					  old_active_vmid, vmid))
-		return;
+		return false;
 
 	raw_spin_lock_irqsave(&cpu_vmid_lock, flags);
 
 	/* Check that our VMID belongs to the current generation. */
 	vmid = atomic64_read(&kvm_vmid->id);
-	if (!vmid_gen_match(vmid))
+	if (!vmid_gen_match(vmid)) {
 		vmid = new_vmid(kvm_vmid);
+		updated = true;
+	}
 
 	atomic64_set(this_cpu_ptr(&active_vmids), vmid);
 	raw_spin_unlock_irqrestore(&cpu_vmid_lock, flags);
+
+	return updated;
 }
 
 /*
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index c336d2ffd..6a56d7cf3 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -18,13 +18,6 @@
  *	x1 - src
  */
 SYM_FUNC_START(__pi_copy_page)
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	// Prefetch three cache lines ahead.
-	prfm	pldl1strm, [x1, #128]
-	prfm	pldl1strm, [x1, #256]
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	ldp	x2, x3, [x1]
 	ldp	x4, x5, [x1, #16]
 	ldp	x6, x7, [x1, #32]
@@ -39,10 +32,6 @@ alternative_else_nop_endif
 1:
 	tst	x0, #(PAGE_SIZE - 1)
 
-alternative_if ARM64_HAS_NO_HW_PREFETCH
-	prfm	pldl1strm, [x1, #384]
-alternative_else_nop_endif
-
 	stnp	x2, x3, [x0, #-256]
 	ldp	x2, x3, [x1]
 	stnp	x4, x5, [x0, #16 - 256]
diff --git a/arch/arm64/lib/delay.c b/arch/arm64/lib/delay.c
index 5b7890139..cb2062e7e 100644
--- a/arch/arm64/lib/delay.c
+++ b/arch/arm64/lib/delay.c
@@ -27,7 +27,7 @@ void __delay(unsigned long cycles)
 {
 	cycles_t start = get_cycles();
 
-	if (cpus_have_const_cap(ARM64_HAS_WFXT)) {
+	if (alternative_has_cap_unlikely(ARM64_HAS_WFXT)) {
 		u64 end = start + cycles;
 
 		/*
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 3cb101e8c..61886e43e 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -47,7 +47,7 @@ void arch_teardown_dma_ops(struct device *dev)
 #endif
 
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+			bool coherent)
 {
 	int cls = cache_line_size_of_cpu();
 
@@ -58,7 +58,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 		   ARCH_DMA_MINALIGN, cls);
 
 	dev->dma_coherent = coherent;
-	if (iommu)
+	if (device_iommu_mapped(dev))
 		iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
 
 	xen_setup_dma_ops(dev);
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 2e5d1e238..55f6455a8 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -571,7 +571,7 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 		/* Write implies read */
 		vm_flags |= VM_WRITE;
 		/* If EPAN is absent then exec implies read */
-		if (!cpus_have_const_cap(ARM64_HAS_EPAN))
+		if (!alternative_has_cap_unlikely(ARM64_HAS_EPAN))
 			vm_flags |= VM_EXEC;
 	}
 
@@ -607,6 +607,8 @@ static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
 		goto done;
 	}
 	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+	if (fault & VM_FAULT_MAJOR)
+		mm_flags |= FAULT_FLAG_TRIED;
 
 	/* Quick path to respond to signals */
 	if (fault_signal_pending(fault, regs)) {
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 13fd59222..8116ac599 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -51,7 +51,7 @@ void __init arm64_hugetlb_cma_reserve(void)
 	 * page allocator. Just warn if there is any change
 	 * breaking this assumption.
 	 */
-	WARN_ON(order <= MAX_ORDER);
+	WARN_ON(order <= MAX_PAGE_ORDER);
 	hugetlb_cma_reserve(order);
 }
 #endif /* CONFIG_CMA */
@@ -544,8 +544,7 @@ bool __init arch_hugetlb_valid_size(unsigned long size)
 
 pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
 {
-	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) &&
-	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) {
 		/*
 		 * Break-before-make (BBM) is required for all user space mappings
 		 * when the permission changes from executable to non-executable
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 8a0f86043..74c1db8ce 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -16,6 +16,7 @@
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
 #include <linux/gfp.h>
+#include <linux/math.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
 #include <linux/of.h>
@@ -64,15 +65,6 @@ EXPORT_SYMBOL(memstart_addr);
  */
 phys_addr_t __ro_after_init arm64_dma_phys_limit;
 
-/* Current arm64 boot protocol requires 2MB alignment */
-#define CRASH_ALIGN			SZ_2M
-
-#define CRASH_ADDR_LOW_MAX		arm64_dma_phys_limit
-#define CRASH_ADDR_HIGH_MAX		(PHYS_MASK + 1)
-#define CRASH_HIGH_SEARCH_BASE		SZ_4G
-
-#define DEFAULT_CRASH_KERNEL_LOW_SIZE	(128UL << 20)
-
 /*
  * To make optimal use of block mappings when laying out the linear
  * mapping, round down the base of physical memory to a size that can
@@ -100,140 +92,25 @@ phys_addr_t __ro_after_init arm64_dma_phys_limit;
 #define ARM64_MEMSTART_ALIGN	(1UL << ARM64_MEMSTART_SHIFT)
 #endif
 
-static int __init reserve_crashkernel_low(unsigned long long low_size)
+static void __init arch_reserve_crashkernel(void)
 {
-	unsigned long long low_base;
-
-	low_base = memblock_phys_alloc_range(low_size, CRASH_ALIGN, 0, CRASH_ADDR_LOW_MAX);
-	if (!low_base) {
-		pr_err("cannot allocate crashkernel low memory (size:0x%llx).\n", low_size);
-		return -ENOMEM;
-	}
-
-	pr_info("crashkernel low memory reserved: 0x%08llx - 0x%08llx (%lld MB)\n",
-		low_base, low_base + low_size, low_size >> 20);
-
-	crashk_low_res.start = low_base;
-	crashk_low_res.end   = low_base + low_size - 1;
-	insert_resource(&iomem_resource, &crashk_low_res);
-
-	return 0;
-}
-
-/*
- * reserve_crashkernel() - reserves memory for crash kernel
- *
- * This function reserves memory area given in "crashkernel=" kernel command
- * line parameter. The memory reserved is used by dump capture kernel when
- * primary kernel is crashing.
- */
-static void __init reserve_crashkernel(void)
-{
-	unsigned long long crash_low_size = 0, search_base = 0;
-	unsigned long long crash_max = CRASH_ADDR_LOW_MAX;
+	unsigned long long low_size = 0;
 	unsigned long long crash_base, crash_size;
 	char *cmdline = boot_command_line;
-	bool fixed_base = false;
 	bool high = false;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
 		return;
 
-	/* crashkernel=X[@offset] */
 	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
-				&crash_size, &crash_base);
-	if (ret == -ENOENT) {
-		ret = parse_crashkernel_high(cmdline, 0, &crash_size, &crash_base);
-		if (ret || !crash_size)
-			return;
-
-		/*
-		 * crashkernel=Y,low can be specified or not, but invalid value
-		 * is not allowed.
-		 */
-		ret = parse_crashkernel_low(cmdline, 0, &crash_low_size, &crash_base);
-		if (ret == -ENOENT)
-			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
-		else if (ret)
-			return;
-
-		search_base = CRASH_HIGH_SEARCH_BASE;
-		crash_max = CRASH_ADDR_HIGH_MAX;
-		high = true;
-	} else if (ret || !crash_size) {
-		/* The specified value is invalid */
-		return;
-	}
-
-	crash_size = PAGE_ALIGN(crash_size);
-
-	/* User specifies base address explicitly. */
-	if (crash_base) {
-		fixed_base = true;
-		search_base = crash_base;
-		crash_max = crash_base + crash_size;
-	}
-
-retry:
-	crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN,
-					       search_base, crash_max);
-	if (!crash_base) {
-		/*
-		 * For crashkernel=size[KMG]@offset[KMG], print out failure
-		 * message if can't reserve the specified region.
-		 */
-		if (fixed_base) {
-			pr_warn("crashkernel reservation failed - memory is in use.\n");
-			return;
-		}
-
-		/*
-		 * For crashkernel=size[KMG], if the first attempt was for
-		 * low memory, fall back to high memory, the minimum required
-		 * low memory will be reserved later.
-		 */
-		if (!high && crash_max == CRASH_ADDR_LOW_MAX) {
-			crash_max = CRASH_ADDR_HIGH_MAX;
-			search_base = CRASH_ADDR_LOW_MAX;
-			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
-			goto retry;
-		}
-
-		/*
-		 * For crashkernel=size[KMG],high, if the first attempt was
-		 * for high memory, fall back to low memory.
-		 */
-		if (high && crash_max == CRASH_ADDR_HIGH_MAX) {
-			crash_max = CRASH_ADDR_LOW_MAX;
-			search_base = 0;
-			goto retry;
-		}
-		pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
-			crash_size);
+				&crash_size, &crash_base,
+				&low_size, &high);
+	if (ret)
 		return;
-	}
-
-	if ((crash_base >= CRASH_ADDR_LOW_MAX) && crash_low_size &&
-	     reserve_crashkernel_low(crash_low_size)) {
-		memblock_phys_free(crash_base, crash_size);
-		return;
-	}
-
-	pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n",
-		crash_base, crash_base + crash_size, crash_size >> 20);
 
-	/*
-	 * The crashkernel memory will be removed from the kernel linear
-	 * map. Inform kmemleak so that it won't try to access it.
-	 */
-	kmemleak_ignore_phys(crash_base);
-	if (crashk_low_res.end)
-		kmemleak_ignore_phys(crashk_low_res.start);
-
-	crashk_res.start = crash_base;
-	crashk_res.end = crash_base + crash_size - 1;
-	insert_resource(&iomem_resource, &crashk_res);
+	reserve_crashkernel_generic(cmdline, crash_size, crash_base,
+				    low_size, high);
 }
 
 /*
@@ -479,7 +356,7 @@ void __init bootmem_init(void)
 	 * request_standard_resources() depends on crashkernel's memory being
 	 * reserved, so do it here.
 	 */
-	reserve_crashkernel();
+	arch_reserve_crashkernel();
 
 	memblock_dump_all();
 }
@@ -493,8 +370,16 @@ void __init mem_init(void)
 {
 	bool swiotlb = max_pfn > PFN_DOWN(arm64_dma_phys_limit);
 
-	if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC))
+	if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC) && !swiotlb) {
+		/*
+		 * If no bouncing needed for ZONE_DMA, reduce the swiotlb
+		 * buffer for kmalloc() bouncing to 1MB per 1GB of RAM.
+		 */
+		unsigned long size =
+			DIV_ROUND_UP(memblock_phys_mem_size(), 1024);
+		swiotlb_adjust_size(min(swiotlb_size_or_default(), size));
 		swiotlb = true;
+	}
 
 	swiotlb_init(swiotlb, SWIOTLB_VERBOSE);
 
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index f17d066e8..4c7ad574b 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -170,6 +170,11 @@ asmlinkage void __init kasan_early_init(void)
 {
 	BUILD_BUG_ON(KASAN_SHADOW_OFFSET !=
 		KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT)));
+	/*
+	 * We cannot check the actual value of KASAN_SHADOW_START during build,
+	 * as it depends on vabits_actual. As a best-effort approach, check
+	 * potential values calculated based on VA_BITS and VA_BITS_MIN.
+	 */
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
@@ -300,7 +305,11 @@ void __init kasan_init(void)
 	kasan_init_shadow();
 	kasan_init_depth();
 #if defined(CONFIG_KASAN_GENERIC)
-	/* CONFIG_KASAN_SW_TAGS also requires kasan_init_sw_tags(). */
+	/*
+	 * Generic KASAN is now fully initialized.
+	 * Software and Hardware Tag-Based modes still require
+	 * kasan_init_sw_tags() and kasan_init_hw_tags() correspondingly.
+	 */
 	pr_info("KernelAddressSanitizer initialized (generic)\n");
 #endif
 }
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index 8f5b7ce85..645fe60d0 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -68,7 +68,7 @@ static int __init adjust_protection_map(void)
 	 * With Enhanced PAN we can honour the execute-only permissions as
 	 * there is no PAN override with such mappings.
 	 */
-	if (cpus_have_const_cap(ARM64_HAS_EPAN)) {
+	if (cpus_have_cap(ARM64_HAS_EPAN)) {
 		protection_map[VM_EXEC] = PAGE_EXECONLY;
 		protection_map[VM_EXEC | VM_SHARED] = PAGE_EXECONLY;
 	}
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 47781bec6..1ac7467d3 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -52,9 +52,6 @@ u64 vabits_actual __ro_after_init = VA_BITS_MIN;
 EXPORT_SYMBOL(vabits_actual);
 #endif
 
-u64 kimage_vaddr __ro_after_init = (u64)&_text;
-EXPORT_SYMBOL(kimage_vaddr);
-
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
@@ -674,6 +671,9 @@ static int __init map_entry_trampoline(void)
 {
 	int i;
 
+	if (!arm64_kernel_unmapped_at_el0())
+		return 0;
+
 	pgprot_t prot = kernel_exec_prot();
 	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
 
@@ -1469,8 +1469,7 @@ early_initcall(prevent_bootmem_remove_init);
 
 pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
 {
-	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) &&
-	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+	if (alternative_has_cap_unlikely(ARM64_WORKAROUND_2645198)) {
 		/*
 		 * Break-before-make (BBM) is required for all user space mappings
 		 * when the permission changes from executable to non-executable
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 924843f1f..0a62f458c 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -219,9 +219,6 @@ bool kernel_page_present(struct page *page)
 	pte_t *ptep;
 	unsigned long addr = (unsigned long)page_address(page);
 
-	if (!can_set_direct_map())
-		return true;
-
 	pgdp = pgd_offset_k(addr);
 	if (pgd_none(READ_ONCE(*pgdp)))
 		return false;
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 14fdf645e..f66c37a16 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -405,8 +405,7 @@ SYM_FUNC_START(__cpu_setup)
 	tlbi	vmalle1				// Invalidate local TLB
 	dsb	nsh
 
-	mov	x1, #3 << 20
-	msr	cpacr_el1, x1			// Enable FP/ASIMD
+	msr	cpacr_el1, xzr			// Reset cpacr_el1
 	mov	x1, #1 << 12			// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x1			// access to the DCC from EL0
 	isb					// Unmask debug exceptions now,
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 150d1c654..ceed77c29 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -288,7 +288,7 @@ static bool is_lsi_offset(int offset, int scale)
 static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
 {
 	const struct bpf_prog *prog = ctx->prog;
-	const bool is_main_prog = prog->aux->func_idx == 0;
+	const bool is_main_prog = !bpf_is_subprog(prog);
 	const u8 r6 = bpf2a64[BPF_REG_6];
 	const u8 r7 = bpf2a64[BPF_REG_7];
 	const u8 r8 = bpf2a64[BPF_REG_8];
@@ -876,7 +876,7 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 			emit(A64_UXTH(is64, dst, dst), ctx);
 			break;
 		case 32:
-			emit(A64_REV32(is64, dst, dst), ctx);
+			emit(A64_REV32(0, dst, dst), ctx);
 			/* upper 32 bits already cleared */
 			break;
 		case 64:
@@ -1189,7 +1189,7 @@ emit_cond_jmp:
 			} else {
 				emit_a64_mov_i(1, tmp, off, ctx);
 				if (sign_extend)
-					emit(A64_LDRSW(dst, src_adj, off_adj), ctx);
+					emit(A64_LDRSW(dst, src, tmp), ctx);
 				else
 					emit(A64_LDR32(dst, src, tmp), ctx);
 			}
@@ -1738,15 +1738,15 @@ static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
 
 	emit_call(enter_prog, ctx);
 
+	/* save return value to callee saved register x20 */
+	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
+
 	/* if (__bpf_prog_enter(prog) == 0)
 	 *         goto skip_exec_of_prog;
 	 */
 	branch = ctx->image + ctx->idx;
 	emit(A64_NOP, ctx);
 
-	/* save return value to callee saved register x20 */
-	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
-
 	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
 	if (!p->jited)
 		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);
@@ -1828,7 +1828,7 @@ static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
  *
  */
 static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
-			      struct bpf_tramp_links *tlinks, void *orig_call,
+			      struct bpf_tramp_links *tlinks, void *func_addr,
 			      int nregs, u32 flags)
 {
 	int i;
@@ -1926,7 +1926,7 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 
 	if (flags & BPF_TRAMP_F_IP_ARG) {
 		/* save ip address of the traced function */
-		emit_addr_mov_i64(A64_R(10), (const u64)orig_call, ctx);
+		emit_addr_mov_i64(A64_R(10), (const u64)func_addr, ctx);
 		emit(A64_STR64I(A64_R(10), A64_SP, ip_off), ctx);
 	}
 
@@ -2026,18 +2026,10 @@ static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
 	return ctx->idx;
 }
 
-int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
-				void *image_end, const struct btf_func_model *m,
-				u32 flags, struct bpf_tramp_links *tlinks,
-				void *orig_call)
+static int btf_func_model_nregs(const struct btf_func_model *m)
 {
-	int i, ret;
 	int nregs = m->nr_args;
-	int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE;
-	struct jit_ctx ctx = {
-		.image = NULL,
-		.idx = 0,
-	};
+	int i;
 
 	/* extra registers needed for struct argument */
 	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
@@ -2046,22 +2038,49 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 			nregs += (m->arg_size[i] + 7) / 8 - 1;
 	}
 
+	return nregs;
+}
+
+int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags,
+			     struct bpf_tramp_links *tlinks, void *func_addr)
+{
+	struct jit_ctx ctx = {
+		.image = NULL,
+		.idx = 0,
+	};
+	struct bpf_tramp_image im;
+	int nregs, ret;
+
+	nregs = btf_func_model_nregs(m);
 	/* the first 8 registers are used for arguments */
 	if (nregs > 8)
 		return -ENOTSUPP;
 
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, &im, tlinks, func_addr, nregs, flags);
 	if (ret < 0)
 		return ret;
 
-	if (ret > max_insns)
-		return -EFBIG;
+	return ret < 0 ? ret : ret * AARCH64_INSN_SIZE;
+}
 
-	ctx.image = image;
-	ctx.idx = 0;
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
+				void *image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks,
+				void *func_addr)
+{
+	int ret, nregs;
+	struct jit_ctx ctx = {
+		.image = image,
+		.idx = 0,
+	};
+
+	nregs = btf_func_model_nregs(m);
+	/* the first 8 registers are used for arguments */
+	if (nregs > 8)
+		return -ENOTSUPP;
 
 	jit_fill_hole(image, (unsigned int)(image_end - image));
-	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	ret = prepare_trampoline(&ctx, im, tlinks, func_addr, nregs, flags);
 
 	if (ret > 0 && validate_code(&ctx) < 0)
 		ret = -EINVAL;
diff --git a/arch/arm64/tools/Makefile b/arch/arm64/tools/Makefile
index 07a93ab21..fa2251d97 100644
--- a/arch/arm64/tools/Makefile
+++ b/arch/arm64/tools/Makefile
@@ -3,7 +3,7 @@
 gen := arch/$(ARCH)/include/generated
 kapi := $(gen)/asm
 
-kapi-hdrs-y := $(kapi)/cpucaps.h $(kapi)/sysreg-defs.h
+kapi-hdrs-y := $(kapi)/cpucap-defs.h $(kapi)/sysreg-defs.h
 
 targets += $(addprefix ../../../, $(kapi-hdrs-y))
 
@@ -17,7 +17,7 @@ quiet_cmd_gen_cpucaps = GEN     $@
 quiet_cmd_gen_sysreg = GEN     $@
       cmd_gen_sysreg = mkdir -p $(dir $@); $(AWK) -f $(real-prereqs) > $@
 
-$(kapi)/cpucaps.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE
+$(kapi)/cpucap-defs.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE
 	$(call if_changed,gen_cpucaps)
 
 $(kapi)/sysreg-defs.h: $(src)/gen-sysreg.awk $(src)/sysreg FORCE
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index 5511bee15..b912b1409 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -27,6 +27,7 @@ HAS_ECV_CNTPOFF
 HAS_EPAN
 HAS_EVT
 HAS_FGT
+HAS_FPSIMD
 HAS_GENERIC_AUTH
 HAS_GENERIC_AUTH_ARCH_QARMA3
 HAS_GENERIC_AUTH_ARCH_QARMA5
@@ -36,11 +37,10 @@ HAS_GIC_PRIO_MASKING
 HAS_GIC_PRIO_RELAXED_SYNC
 HAS_HCX
 HAS_LDAPR
+HAS_LPA2
 HAS_LSE_ATOMICS
 HAS_MOPS
 HAS_NESTED_VIRT
-HAS_NO_FPSIMD
-HAS_NO_HW_PREFETCH
 HAS_PAN
 HAS_S1PIE
 HAS_RAS_EXTN
diff --git a/arch/arm64/tools/gen-cpucaps.awk b/arch/arm64/tools/gen-cpucaps.awk
index 852598037..2f4f61a0a 100755
--- a/arch/arm64/tools/gen-cpucaps.awk
+++ b/arch/arm64/tools/gen-cpucaps.awk
@@ -15,8 +15,8 @@ function fatal(msg) {
 /^#/ { next }
 
 BEGIN {
-	print "#ifndef __ASM_CPUCAPS_H"
-	print "#define __ASM_CPUCAPS_H"
+	print "#ifndef __ASM_CPUCAP_DEFS_H"
+	print "#define __ASM_CPUCAP_DEFS_H"
 	print ""
 	print "/* Generated file - do not edit */"
 	cap_num = 0
@@ -31,7 +31,7 @@ BEGIN {
 END {
 	printf("#define ARM64_NCAPS\t\t\t\t\t%d\n", cap_num)
 	print ""
-	print "#endif /* __ASM_CPUCAPS_H */"
+	print "#endif /* __ASM_CPUCAP_DEFS_H */"
 }
 
 # Any lines not handled by previous rules are unexpected
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index 76ce150e7..4c9b67934 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -1002,6 +1002,27 @@ UnsignedEnum	3:0	BT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64PFR2_EL1	3	0	0	4	2
+Res0	63:36
+UnsignedEnum	35:32	FPMR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	31:12
+UnsignedEnum	11:8	MTEFAR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	MTESTOREONLY
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	MTEPERM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64ZFR0_EL1	3	0	0	4	4
 Res0	63:60
 UnsignedEnum	59:56	F64MM
@@ -1026,7 +1047,11 @@ UnsignedEnum	35:32	SHA3
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	31:24
+Res0	31:28
+UnsignedEnum	27:24	B16B16
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	23:20	BF16
 	0b0000	NI
 	0b0001	IMP
@@ -1054,7 +1079,11 @@ UnsignedEnum	63	FA64
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	62:60
+Res0	62:61
+UnsignedEnum	60	LUTv2
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	59:56	SMEver
 	0b0000	SME
 	0b0001	SME2
@@ -1082,7 +1111,14 @@ UnsignedEnum	42	F16F16
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	41:40
+UnsignedEnum	41	F8F16
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	40	F8F32
+	0b0	NI
+	0b1	IMP
+EndEnum
 UnsignedEnum	39:36	I8I32
 	0b0000	NI
 	0b1111	IMP
@@ -1103,7 +1139,49 @@ UnsignedEnum	32	F32F32
 	0b0	NI
 	0b1	IMP
 EndEnum
-Res0	31:0
+Res0	31
+UnsignedEnum	30	SF8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	SF8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	SF8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:0
+EndSysreg
+
+Sysreg	ID_AA64FPFR0_EL1	3	0	0	4	7
+Res0	63:32
+UnsignedEnum	31	F8CVT
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	30	F8FMA
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	29	F8DP4
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	28	F8DP2
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	27:2
+UnsignedEnum	1	F8E4M3
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	0	F8E5M2
+	0b0	NI
+	0b1	IMP
+EndEnum
 EndSysreg
 
 Sysreg	ID_AA64DFR0_EL1	3	0	0	5	0
@@ -1111,7 +1189,10 @@ Enum	63:60	HPMN0
 	0b0000	UNPREDICTABLE
 	0b0001	DEF
 EndEnum
-Res0	59:56
+UnsignedEnum	59:56	ExtTrcBuff
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	BRBE
 	0b0000	NI
 	0b0001	IMP
@@ -1235,6 +1316,7 @@ EndEnum
 UnsignedEnum	23:20	ATOMIC
 	0b0000	NI
 	0b0010	IMP
+	0b0011	FEAT_LSE128
 EndEnum
 UnsignedEnum	19:16	CRC32
 	0b0000	NI
@@ -1305,6 +1387,7 @@ UnsignedEnum	23:20	LRCPC
 	0b0000	NI
 	0b0001	IMP
 	0b0010	LRCPC2
+	0b0011	LRCPC3
 EndEnum
 UnsignedEnum	19:16	FCMA
 	0b0000	NI
@@ -1321,6 +1404,7 @@ UnsignedEnum	11:8	API
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	7:4	APA
 	0b0000	NI
@@ -1329,6 +1413,7 @@ UnsignedEnum	7:4	APA
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	3:0	DPB
 	0b0000	NI
@@ -1338,7 +1423,14 @@ EndEnum
 EndSysreg
 
 Sysreg	ID_AA64ISAR2_EL1	3	0	0	6	2
-Res0	63:56
+UnsignedEnum	63:60	ATS1A
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	LUT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	55:52	CSSC
 	0b0000	NI
 	0b0001	IMP
@@ -1347,7 +1439,19 @@ UnsignedEnum	51:48	RPRFM
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-Res0	47:32
+Res0	47:44
+UnsignedEnum	43:40	PRFMSLC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	SYSINSTR_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	SYSREG_128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
 UnsignedEnum	31:28	CLRBHB
 	0b0000	NI
 	0b0001	IMP
@@ -1371,6 +1475,7 @@ UnsignedEnum	15:12	APA3
 	0b0011	PAuth2
 	0b0100	FPAC
 	0b0101	FPACCOMBINE
+	0b0110	PAuth_LR
 EndEnum
 UnsignedEnum	11:8	GPA3
 	0b0000	NI
@@ -1386,6 +1491,23 @@ UnsignedEnum	3:0	WFxT
 EndEnum
 EndSysreg
 
+Sysreg	ID_AA64ISAR3_EL1	3	0	0	6	3
+Res0	63:12
+UnsignedEnum	11:8	TLBIW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	FAMINMAX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	CPA
+	0b0000	NI
+	0b0001	IMP
+	0b0010	CPA2
+EndEnum
+EndSysreg
+
 Sysreg	ID_AA64MMFR0_EL1	3	0	0	7	0
 UnsignedEnum	63:60	ECV
 	0b0000	NI
@@ -1674,7 +1796,8 @@ Field	63	TIDCP
 Field	62	SPINTMASK
 Field	61	NMI
 Field	60	EnTP2
-Res0	59:58
+Field	59	TCSO
+Field	58	TCSO0
 Field	57	EPAN
 Field	56	EnALS
 Field	55	EnAS0
@@ -1703,7 +1826,7 @@ EndEnum
 Field	37	ITFSB
 Field	36	BT1
 Field	35	BT0
-Res0	34
+Field	34	EnFPM
 Field	33	MSCEn
 Field	32	CMOW
 Field	31	EnIA
@@ -1741,7 +1864,8 @@ Field	0	M
 EndSysreg
 
 SysregFields	CPACR_ELx
-Res0	63:29
+Res0	63:30
+Field	29	E0POE
 Field	28	TTA
 Res0	27:26
 Field	25:24	SMEN
@@ -1784,6 +1908,41 @@ Sysreg	SMCR_EL1	3	0	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+SysregFields	GCSCR_ELx
+Res0	63:10
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7
+Field	6	EXLOCKEN
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysregFields
+
+Sysreg	GCSCR_EL1	3	0	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+SysregFields	GCSPR_ELx
+Field	63:3	PTR
+Res0	2:0
+EndSysregFields
+
+Sysreg	GCSPR_EL1	3	0	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
+Sysreg	GCSCRE0_EL1	3	0	2	5	2
+Res0	63:11
+Field	10	nTR
+Field	9	STREn
+Field	8	PUSHMEn
+Res0	7:6
+Field	5	RVCHKEN
+Res0	4:1
+Field	0	PCRSEL
+EndSysreg
+
 Sysreg	ALLINT	3	0	4	3	0
 Res0	63:14
 Field	13	ALLINT
@@ -1927,10 +2086,18 @@ Sysreg	CONTEXTIDR_EL1	3	0	13	0	1
 Fields	CONTEXTIDR_ELx
 EndSysreg
 
+Sysreg	RCWSMASK_EL1	3	0	13	0	3
+Field	63:0	RCWSMASK
+EndSysreg
+
 Sysreg	TPIDR_EL1	3	0	13	0	4
 Field	63:0	ThreadID
 EndSysreg
 
+Sysreg	RCWMASK_EL1	3	0	13	0	6
+Field	63:0	RCWMASK
+EndSysreg
+
 Sysreg	SCXTNUM_EL1	3	0	13	0	7
 Field	63:0	SoftwareContextNumber
 EndSysreg
@@ -1998,9 +2165,10 @@ Field	27:24	CWG
 Field	23:20	ERG
 Field	19:16	DminLine
 Enum	15:14	L1Ip
-	0b00	VPIPT
+	# This was named as VPIPT in the ARM but now documented as reserved
+	0b00	RESERVED_VPIPT
 	# This is named as AIVIVT in the ARM but documented as reserved
-	0b01	RESERVED
+	0b01	RESERVED_AIVIVT
 	0b10	VIPT
 	0b11	PIPT
 EndEnum
@@ -2014,12 +2182,39 @@ Field	4	DZP
 Field	3:0	BS
 EndSysreg
 
+Sysreg	GCSPR_EL0	3	3	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	SVCR	3	3	4	2	2
 Res0	63:2
 Field	1	ZA
 Field	0	SM
 EndSysreg
 
+Sysreg	FPMR	3	3	4	4	2
+Res0	63:38
+Field	37:32	LSCALE2
+Field	31:24	NSCALE
+Res0	23
+Field	22:16	LSCALE
+Field	15	OSC
+Field	14	OSM
+Res0	13:9
+UnsignedEnum	8:6	F8D
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	5:3	F8S2
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+UnsignedEnum	2:0	F8S1
+	0b000	E5M2
+	0b001	E4M3
+EndEnum
+EndSysreg
+
 SysregFields	HFGxTR_EL2
 Field	63	nAMAIR2_EL1
 Field	62	nMAIR2_EL1
@@ -2096,7 +2291,9 @@ Fields	HFGxTR_EL2
 EndSysreg
 
 Sysreg HFGITR_EL2	3	4	1	1	6
-Res0	63:61
+Res0	63
+Field	62	ATS1E1A
+Res0	61
 Field	60	COSPRCTX
 Field	59	nGCSEPP
 Field	58	nGCSSTR_EL1
@@ -2289,12 +2486,57 @@ Field	1	DBGBVRn_EL1
 Field	0	DBGBCRn_EL1
 EndSysreg
 
+Sysreg HAFGRTR_EL2	3	4	3	1	6
+Res0	63:50
+Field	49	AMEVTYPER115_EL0
+Field	48	AMEVCNTR115_EL0
+Field	47	AMEVTYPER114_EL0
+Field	46	AMEVCNTR114_EL0
+Field	45	AMEVTYPER113_EL0
+Field	44	AMEVCNTR113_EL0
+Field	43	AMEVTYPER112_EL0
+Field	42	AMEVCNTR112_EL0
+Field	41	AMEVTYPER111_EL0
+Field	40	AMEVCNTR111_EL0
+Field	39	AMEVTYPER110_EL0
+Field	38	AMEVCNTR110_EL0
+Field	37	AMEVTYPER19_EL0
+Field	36	AMEVCNTR19_EL0
+Field	35	AMEVTYPER18_EL0
+Field	34	AMEVCNTR18_EL0
+Field	33	AMEVTYPER17_EL0
+Field	32	AMEVCNTR17_EL0
+Field	31	AMEVTYPER16_EL0
+Field	30	AMEVCNTR16_EL0
+Field	29	AMEVTYPER15_EL0
+Field	28	AMEVCNTR15_EL0
+Field	27	AMEVTYPER14_EL0
+Field	26	AMEVCNTR14_EL0
+Field	25	AMEVTYPER13_EL0
+Field	24	AMEVCNTR13_EL0
+Field	23	AMEVTYPER12_EL0
+Field	22	AMEVCNTR12_EL0
+Field	21	AMEVTYPER11_EL0
+Field	20	AMEVCNTR11_EL0
+Field	19	AMEVTYPER10_EL0
+Field	18	AMEVCNTR10_EL0
+Field	17	AMCNTEN1
+Res0	16:5
+Field	4	AMEVCNTR03_EL0
+Field	3	AMEVCNTR02_EL0
+Field	2	AMEVCNTR01_EL0
+Field	1	AMEVCNTR00_EL0
+Field	0	AMCNTEN0
+EndSysreg
+
 Sysreg	ZCR_EL2	3	4	1	2	0
 Fields	ZCR_ELx
 EndSysreg
 
 Sysreg	HCRX_EL2	3	4	1	2	2
-Res0	63:23
+Res0	63:25
+Field	24	PACMEn
+Field	23	EnFPM
 Field	22	GCSEn
 Field	21	EnIDCP128
 Field	20	EnSDERR
@@ -2342,6 +2584,14 @@ Sysreg	SMCR_EL2	3	4	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL2	3	4	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL2	3	4	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	DACR32_EL2	3	4	3	0	0
 Res0	63:32
 Field	31:30	D15
@@ -2401,6 +2651,14 @@ Sysreg	SMCR_EL12	3	5	1	2	6
 Fields	SMCR_ELx
 EndSysreg
 
+Sysreg	GCSCR_EL12	3	5	2	5	0
+Fields	GCSCR_ELx
+EndSysreg
+
+Sysreg	GCSPR_EL12	3	5	2	5	1
+Fields	GCSPR_ELx
+EndSysreg
+
 Sysreg	FAR_EL12	3	5	6	0	0
 Field	63:0	ADDR
 EndSysreg
@@ -2465,6 +2723,33 @@ Field	1	PIE
 Field	0	PnCH
 EndSysreg
 
+SysregFields MAIR2_ELx
+Field	63:56	Attr7
+Field	55:48	Attr6
+Field	47:40	Attr5
+Field	39:32	Attr4
+Field	31:24	Attr3
+Field	23:16	Attr2
+Field	15:8	Attr1
+Field	7:0	Attr0
+EndSysregFields
+
+Sysreg	MAIR2_EL1	3	0	10	2	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	MAIR2_EL2	3	4	10	1	1
+Fields	MAIR2_ELx
+EndSysreg
+
+Sysreg	AMAIR2_EL1	3	0	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
+Sysreg	AMAIR2_EL2	3	4	10	3	1
+Field	63:0	ImpDef
+EndSysreg
+
 SysregFields PIRx_ELx
 Field	63:60	Perm15
 Field	59:56	Perm14
@@ -2504,6 +2789,26 @@ Sysreg	PIR_EL2		3	4	10	2	3
 Fields	PIRx_ELx
 EndSysreg
 
+Sysreg	POR_EL0		3	3	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL1		3	0	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	POR_EL12	3	5	10	2	4
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2POR_EL1	3	0	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	S2PIR_EL2	3	4	10	2	5
+Fields	PIRx_ELx
+EndSysreg
+
 Sysreg	LORSA_EL1	3	0	10	4	0
 Res0	63:52
 Field	51:16	SA