diff options
Diffstat (limited to 'tools/testing/selftests/kvm/lib/aarch64/gic_v3.c')
-rw-r--r-- | tools/testing/selftests/kvm/lib/aarch64/gic_v3.c | 398 |
1 files changed, 398 insertions, 0 deletions
diff --git a/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c new file mode 100644 index 0000000000..263bf3ed8f --- /dev/null +++ b/tools/testing/selftests/kvm/lib/aarch64/gic_v3.c @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ARM Generic Interrupt Controller (GIC) v3 support + */ + +#include <linux/sizes.h> + +#include "kvm_util.h" +#include "processor.h" +#include "delay.h" + +#include "gic_v3.h" +#include "gic_private.h" + +struct gicv3_data { + void *dist_base; + void *redist_base[GICV3_MAX_CPUS]; + unsigned int nr_cpus; + unsigned int nr_spis; +}; + +#define sgi_base_from_redist(redist_base) (redist_base + SZ_64K) +#define DIST_BIT (1U << 31) + +enum gicv3_intid_range { + SGI_RANGE, + PPI_RANGE, + SPI_RANGE, + INVALID_RANGE, +}; + +static struct gicv3_data gicv3_data; + +static void gicv3_gicd_wait_for_rwp(void) +{ + unsigned int count = 100000; /* 1s */ + + while (readl(gicv3_data.dist_base + GICD_CTLR) & GICD_CTLR_RWP) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static void gicv3_gicr_wait_for_rwp(void *redist_base) +{ + unsigned int count = 100000; /* 1s */ + + while (readl(redist_base + GICR_CTLR) & GICR_CTLR_RWP) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static void gicv3_wait_for_rwp(uint32_t cpu_or_dist) +{ + if (cpu_or_dist & DIST_BIT) + gicv3_gicd_wait_for_rwp(); + else + gicv3_gicr_wait_for_rwp(gicv3_data.redist_base[cpu_or_dist]); +} + +static enum gicv3_intid_range get_intid_range(unsigned int intid) +{ + switch (intid) { + case 0 ... 15: + return SGI_RANGE; + case 16 ... 31: + return PPI_RANGE; + case 32 ... 1019: + return SPI_RANGE; + } + + /* We should not be reaching here */ + GUEST_ASSERT(0); + + return INVALID_RANGE; +} + +static uint64_t gicv3_read_iar(void) +{ + uint64_t irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1); + + dsb(sy); + return irqstat; +} + +static void gicv3_write_eoir(uint32_t irq) +{ + write_sysreg_s(irq, SYS_ICC_EOIR1_EL1); + isb(); +} + +static void gicv3_write_dir(uint32_t irq) +{ + write_sysreg_s(irq, SYS_ICC_DIR_EL1); + isb(); +} + +static void gicv3_set_priority_mask(uint64_t mask) +{ + write_sysreg_s(mask, SYS_ICC_PMR_EL1); +} + +static void gicv3_set_eoi_split(bool split) +{ + uint32_t val; + + /* + * All other fields are read-only, so no need to read CTLR first. In + * fact, the kernel does the same. + */ + val = split ? (1U << 1) : 0; + write_sysreg_s(val, SYS_ICC_CTLR_EL1); + isb(); +} + +uint32_t gicv3_reg_readl(uint32_t cpu_or_dist, uint64_t offset) +{ + void *base = cpu_or_dist & DIST_BIT ? gicv3_data.dist_base + : sgi_base_from_redist(gicv3_data.redist_base[cpu_or_dist]); + return readl(base + offset); +} + +void gicv3_reg_writel(uint32_t cpu_or_dist, uint64_t offset, uint32_t reg_val) +{ + void *base = cpu_or_dist & DIST_BIT ? gicv3_data.dist_base + : sgi_base_from_redist(gicv3_data.redist_base[cpu_or_dist]); + writel(reg_val, base + offset); +} + +uint32_t gicv3_getl_fields(uint32_t cpu_or_dist, uint64_t offset, uint32_t mask) +{ + return gicv3_reg_readl(cpu_or_dist, offset) & mask; +} + +void gicv3_setl_fields(uint32_t cpu_or_dist, uint64_t offset, + uint32_t mask, uint32_t reg_val) +{ + uint32_t tmp = gicv3_reg_readl(cpu_or_dist, offset) & ~mask; + + tmp |= (reg_val & mask); + gicv3_reg_writel(cpu_or_dist, offset, tmp); +} + +/* + * We use a single offset for the distributor and redistributor maps as they + * have the same value in both. The only exceptions are registers that only + * exist in one and not the other, like GICR_WAKER that doesn't exist in the + * distributor map. Such registers are conveniently marked as reserved in the + * map that doesn't implement it; like GICR_WAKER's offset of 0x0014 being + * marked as "Reserved" in the Distributor map. + */ +static void gicv3_access_reg(uint32_t intid, uint64_t offset, + uint32_t reg_bits, uint32_t bits_per_field, + bool write, uint32_t *val) +{ + uint32_t cpu = guest_get_vcpuid(); + enum gicv3_intid_range intid_range = get_intid_range(intid); + uint32_t fields_per_reg, index, mask, shift; + uint32_t cpu_or_dist; + + GUEST_ASSERT(bits_per_field <= reg_bits); + GUEST_ASSERT(!write || *val < (1U << bits_per_field)); + /* + * This function does not support 64 bit accesses. Just asserting here + * until we implement readq/writeq. + */ + GUEST_ASSERT(reg_bits == 32); + + fields_per_reg = reg_bits / bits_per_field; + index = intid % fields_per_reg; + shift = index * bits_per_field; + mask = ((1U << bits_per_field) - 1) << shift; + + /* Set offset to the actual register holding intid's config. */ + offset += (intid / fields_per_reg) * (reg_bits / 8); + + cpu_or_dist = (intid_range == SPI_RANGE) ? DIST_BIT : cpu; + + if (write) + gicv3_setl_fields(cpu_or_dist, offset, mask, *val << shift); + *val = gicv3_getl_fields(cpu_or_dist, offset, mask) >> shift; +} + +static void gicv3_write_reg(uint32_t intid, uint64_t offset, + uint32_t reg_bits, uint32_t bits_per_field, uint32_t val) +{ + gicv3_access_reg(intid, offset, reg_bits, + bits_per_field, true, &val); +} + +static uint32_t gicv3_read_reg(uint32_t intid, uint64_t offset, + uint32_t reg_bits, uint32_t bits_per_field) +{ + uint32_t val; + + gicv3_access_reg(intid, offset, reg_bits, + bits_per_field, false, &val); + return val; +} + +static void gicv3_set_priority(uint32_t intid, uint32_t prio) +{ + gicv3_write_reg(intid, GICD_IPRIORITYR, 32, 8, prio); +} + +/* Sets the intid to be level-sensitive or edge-triggered. */ +static void gicv3_irq_set_config(uint32_t intid, bool is_edge) +{ + uint32_t val; + + /* N/A for private interrupts. */ + GUEST_ASSERT(get_intid_range(intid) == SPI_RANGE); + val = is_edge ? 2 : 0; + gicv3_write_reg(intid, GICD_ICFGR, 32, 2, val); +} + +static void gicv3_irq_enable(uint32_t intid) +{ + bool is_spi = get_intid_range(intid) == SPI_RANGE; + uint32_t cpu = guest_get_vcpuid(); + + gicv3_write_reg(intid, GICD_ISENABLER, 32, 1, 1); + gicv3_wait_for_rwp(is_spi ? DIST_BIT : cpu); +} + +static void gicv3_irq_disable(uint32_t intid) +{ + bool is_spi = get_intid_range(intid) == SPI_RANGE; + uint32_t cpu = guest_get_vcpuid(); + + gicv3_write_reg(intid, GICD_ICENABLER, 32, 1, 1); + gicv3_wait_for_rwp(is_spi ? DIST_BIT : cpu); +} + +static void gicv3_irq_set_active(uint32_t intid) +{ + gicv3_write_reg(intid, GICD_ISACTIVER, 32, 1, 1); +} + +static void gicv3_irq_clear_active(uint32_t intid) +{ + gicv3_write_reg(intid, GICD_ICACTIVER, 32, 1, 1); +} + +static bool gicv3_irq_get_active(uint32_t intid) +{ + return gicv3_read_reg(intid, GICD_ISACTIVER, 32, 1); +} + +static void gicv3_irq_set_pending(uint32_t intid) +{ + gicv3_write_reg(intid, GICD_ISPENDR, 32, 1, 1); +} + +static void gicv3_irq_clear_pending(uint32_t intid) +{ + gicv3_write_reg(intid, GICD_ICPENDR, 32, 1, 1); +} + +static bool gicv3_irq_get_pending(uint32_t intid) +{ + return gicv3_read_reg(intid, GICD_ISPENDR, 32, 1); +} + +static void gicv3_enable_redist(void *redist_base) +{ + uint32_t val = readl(redist_base + GICR_WAKER); + unsigned int count = 100000; /* 1s */ + + val &= ~GICR_WAKER_ProcessorSleep; + writel(val, redist_base + GICR_WAKER); + + /* Wait until the processor is 'active' */ + while (readl(redist_base + GICR_WAKER) & GICR_WAKER_ChildrenAsleep) { + GUEST_ASSERT(count--); + udelay(10); + } +} + +static inline void *gicr_base_cpu(void *redist_base, uint32_t cpu) +{ + /* Align all the redistributors sequentially */ + return redist_base + cpu * SZ_64K * 2; +} + +static void gicv3_cpu_init(unsigned int cpu, void *redist_base) +{ + void *sgi_base; + unsigned int i; + void *redist_base_cpu; + + GUEST_ASSERT(cpu < gicv3_data.nr_cpus); + + redist_base_cpu = gicr_base_cpu(redist_base, cpu); + sgi_base = sgi_base_from_redist(redist_base_cpu); + + gicv3_enable_redist(redist_base_cpu); + + /* + * Mark all the SGI and PPI interrupts as non-secure Group-1. + * Also, deactivate and disable them. + */ + writel(~0, sgi_base + GICR_IGROUPR0); + writel(~0, sgi_base + GICR_ICACTIVER0); + writel(~0, sgi_base + GICR_ICENABLER0); + + /* Set a default priority for all the SGIs and PPIs */ + for (i = 0; i < 32; i += 4) + writel(GICD_INT_DEF_PRI_X4, + sgi_base + GICR_IPRIORITYR0 + i); + + gicv3_gicr_wait_for_rwp(redist_base_cpu); + + /* Enable the GIC system register (ICC_*) access */ + write_sysreg_s(read_sysreg_s(SYS_ICC_SRE_EL1) | ICC_SRE_EL1_SRE, + SYS_ICC_SRE_EL1); + + /* Set a default priority threshold */ + write_sysreg_s(ICC_PMR_DEF_PRIO, SYS_ICC_PMR_EL1); + + /* Enable non-secure Group-1 interrupts */ + write_sysreg_s(ICC_IGRPEN1_EL1_ENABLE, SYS_ICC_GRPEN1_EL1); + + gicv3_data.redist_base[cpu] = redist_base_cpu; +} + +static void gicv3_dist_init(void) +{ + void *dist_base = gicv3_data.dist_base; + unsigned int i; + + /* Disable the distributor until we set things up */ + writel(0, dist_base + GICD_CTLR); + gicv3_gicd_wait_for_rwp(); + + /* + * Mark all the SPI interrupts as non-secure Group-1. + * Also, deactivate and disable them. + */ + for (i = 32; i < gicv3_data.nr_spis; i += 32) { + writel(~0, dist_base + GICD_IGROUPR + i / 8); + writel(~0, dist_base + GICD_ICACTIVER + i / 8); + writel(~0, dist_base + GICD_ICENABLER + i / 8); + } + + /* Set a default priority for all the SPIs */ + for (i = 32; i < gicv3_data.nr_spis; i += 4) + writel(GICD_INT_DEF_PRI_X4, + dist_base + GICD_IPRIORITYR + i); + + /* Wait for the settings to sync-in */ + gicv3_gicd_wait_for_rwp(); + + /* Finally, enable the distributor globally with ARE */ + writel(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | + GICD_CTLR_ENABLE_G1, dist_base + GICD_CTLR); + gicv3_gicd_wait_for_rwp(); +} + +static void gicv3_init(unsigned int nr_cpus, void *dist_base) +{ + GUEST_ASSERT(nr_cpus <= GICV3_MAX_CPUS); + + gicv3_data.nr_cpus = nr_cpus; + gicv3_data.dist_base = dist_base; + gicv3_data.nr_spis = GICD_TYPER_SPIS( + readl(gicv3_data.dist_base + GICD_TYPER)); + if (gicv3_data.nr_spis > 1020) + gicv3_data.nr_spis = 1020; + + /* + * Initialize only the distributor for now. + * The redistributor and CPU interfaces are initialized + * later for every PE. + */ + gicv3_dist_init(); +} + +const struct gic_common_ops gicv3_ops = { + .gic_init = gicv3_init, + .gic_cpu_init = gicv3_cpu_init, + .gic_irq_enable = gicv3_irq_enable, + .gic_irq_disable = gicv3_irq_disable, + .gic_read_iar = gicv3_read_iar, + .gic_write_eoir = gicv3_write_eoir, + .gic_write_dir = gicv3_write_dir, + .gic_set_priority_mask = gicv3_set_priority_mask, + .gic_set_eoi_split = gicv3_set_eoi_split, + .gic_set_priority = gicv3_set_priority, + .gic_irq_set_active = gicv3_irq_set_active, + .gic_irq_clear_active = gicv3_irq_clear_active, + .gic_irq_get_active = gicv3_irq_get_active, + .gic_irq_set_pending = gicv3_irq_set_pending, + .gic_irq_clear_pending = gicv3_irq_clear_pending, + .gic_irq_get_pending = gicv3_irq_get_pending, + .gic_irq_set_config = gicv3_irq_set_config, +}; |