Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 262 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
new file mode 100644
index 000000000..5eac99021
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ */
+
+#include "i915_drv.h"
+#include "intel_de.h"
+#include "intel_display_types.h"
+#include "intel_vrr.h"
+
+bool intel_vrr_is_capable(struct intel_connector *connector)
+{
+	const struct drm_display_info *info = &connector->base.display_info;
+	struct drm_i915_private *i915 = to_i915(connector->base.dev);
+	struct intel_dp *intel_dp;
+
+	/*
+	 * DP Sink is capable of VRR video timings if
+	 * Ignore MSA bit is set in DPCD.
+	 * EDID monitor range also should be atleast 10 for reasonable
+	 * Adaptive Sync or Variable Refresh Rate end user experience.
+	 */
+	switch (connector->base.connector_type) {
+	case DRM_MODE_CONNECTOR_eDP:
+		if (!connector->panel.vbt.vrr)
+			return false;
+		fallthrough;
+	case DRM_MODE_CONNECTOR_DisplayPort:
+		intel_dp = intel_attached_dp(connector);
+
+		if (!drm_dp_sink_can_do_video_without_timing_msa(intel_dp->dpcd))
+			return false;
+
+		break;
+	default:
+		return false;
+	}
+
+	return HAS_VRR(i915) &&
+		info->monitor_range.max_vfreq - info->monitor_range.min_vfreq > 10;
+}
+
+void
+intel_vrr_check_modeset(struct intel_atomic_state *state)
+{
+	int i;
+	struct intel_crtc_state *old_crtc_state, *new_crtc_state;
+	struct intel_crtc *crtc;
+
+	for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+					    new_crtc_state, i) {
+		if (new_crtc_state->uapi.vrr_enabled !=
+		    old_crtc_state->uapi.vrr_enabled)
+			new_crtc_state->uapi.mode_changed = true;
+	}
+}
+
+/*
+ * Without VRR registers get latched at:
+ *  vblank_start
+ *
+ * With VRR the earliest registers can get latched is:
+ *  intel_vrr_vmin_vblank_start(), which if we want to maintain
+ *  the correct min vtotal is >=vblank_start+1
+ *
+ * The latest point registers can get latched is the vmax decision boundary:
+ *  intel_vrr_vmax_vblank_start()
+ *
+ * Between those two points the vblank exit starts (and hence registers get
+ * latched) ASAP after a push is sent.
+ *
+ * framestart_delay is programmable 1-4.
+ */
+static int intel_vrr_vblank_exit_length(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+
+	/* The hw imposes the extra scanline before frame start */
+	if (DISPLAY_VER(i915) >= 13)
+		return crtc_state->vrr.guardband + crtc_state->framestart_delay + 1;
+	else
+		return crtc_state->vrr.pipeline_full + crtc_state->framestart_delay + 1;
+}
+
+int intel_vrr_vmin_vblank_start(const struct intel_crtc_state *crtc_state)
+{
+	/* Min vblank actually determined by flipline that is always >=vmin+1 */
+	return crtc_state->vrr.vmin + 1 - intel_vrr_vblank_exit_length(crtc_state);
+}
+
+int intel_vrr_vmax_vblank_start(const struct intel_crtc_state *crtc_state)
+{
+	return crtc_state->vrr.vmax - intel_vrr_vblank_exit_length(crtc_state);
+}
+
+void
+intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
+			 struct drm_connector_state *conn_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+	struct intel_connector *connector =
+		to_intel_connector(conn_state->connector);
+	struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+	const struct drm_display_info *info = &connector->base.display_info;
+	int vmin, vmax;
+
+	if (!intel_vrr_is_capable(connector))
+		return;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return;
+
+	if (!crtc_state->uapi.vrr_enabled)
+		return;
+
+	vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
+			    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
+	vmax = adjusted_mode->crtc_clock * 1000 /
+		(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
+
+	vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
+	vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
+
+	if (vmin >= vmax)
+		return;
+
+	/*
+	 * flipline determines the min vblank length the hardware will
+	 * generate, and flipline>=vmin+1, hence we reduce vmin by one
+	 * to make sure we can get the actual min vblank length.
+	 */
+	crtc_state->vrr.vmin = vmin - 1;
+	crtc_state->vrr.vmax = vmax;
+	crtc_state->vrr.enable = true;
+
+	crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
+
+	/*
+	 * For XE_LPD+, we use guardband and pipeline override
+	 * is deprecated.
+	 */
+	if (DISPLAY_VER(i915) >= 13) {
+		/*
+		 * FIXME: Subtract Window2 delay from below value.
+		 *
+		 * Window2 specifies time required to program DSB (Window2) in
+		 * number of scan lines. Assuming 0 for no DSB.
+		 */
+		crtc_state->vrr.guardband =
+			crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay;
+	} else {
+		/*
+		 * FIXME: s/4/framestart_delay/ to get consistent
+		 * earliest/latest points for register latching regardless
+		 * of the framestart_delay used?
+		 *
+		 * FIXME: this really needs the extra scanline to provide consistent
+		 * behaviour for all framestart_delay values. Otherwise with
+		 * framestart_delay==4 we will end up extending the min vblank by
+		 * one extra line.
+		 */
+		crtc_state->vrr.pipeline_full =
+			min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay - 4 - 1);
+	}
+
+	crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+}
+
+void intel_vrr_enable(struct intel_encoder *encoder,
+		      const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	u32 trans_vrr_ctl;
+
+	if (!crtc_state->vrr.enable)
+		return;
+
+	if (DISPLAY_VER(dev_priv) >= 13)
+		trans_vrr_ctl = VRR_CTL_VRR_ENABLE |
+			VRR_CTL_IGN_MAX_SHIFT | VRR_CTL_FLIP_LINE_EN |
+			XELPD_VRR_CTL_VRR_GUARDBAND(crtc_state->vrr.guardband);
+	else
+		trans_vrr_ctl = VRR_CTL_VRR_ENABLE |
+			VRR_CTL_IGN_MAX_SHIFT | VRR_CTL_FLIP_LINE_EN |
+			VRR_CTL_PIPELINE_FULL(crtc_state->vrr.pipeline_full) |
+			VRR_CTL_PIPELINE_FULL_OVERRIDE;
+
+	intel_de_write(dev_priv, TRANS_VRR_VMIN(cpu_transcoder), crtc_state->vrr.vmin - 1);
+	intel_de_write(dev_priv, TRANS_VRR_VMAX(cpu_transcoder), crtc_state->vrr.vmax - 1);
+	intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), trans_vrr_ctl);
+	intel_de_write(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder), crtc_state->vrr.flipline - 1);
+	intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), TRANS_PUSH_EN);
+}
+
+void intel_vrr_send_push(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+	if (!crtc_state->vrr.enable)
+		return;
+
+	intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder),
+		       TRANS_PUSH_EN | TRANS_PUSH_SEND);
+}
+
+bool intel_vrr_is_push_sent(const struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+
+	if (!crtc_state->vrr.enable)
+		return false;
+
+	return intel_de_read(dev_priv, TRANS_PUSH(cpu_transcoder)) & TRANS_PUSH_SEND;
+}
+
+void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
+
+	if (!old_crtc_state->vrr.enable)
+		return;
+
+	intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), 0);
+	intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), 0);
+}
+
+void intel_vrr_get_config(struct intel_crtc *crtc,
+			  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+	u32 trans_vrr_ctl;
+
+	trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder));
+	crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE;
+	if (!crtc_state->vrr.enable)
+		return;
+
+	if (DISPLAY_VER(dev_priv) >= 13)
+		crtc_state->vrr.guardband =
+			REG_FIELD_GET(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, trans_vrr_ctl);
+	else
+		if (trans_vrr_ctl & VRR_CTL_PIPELINE_FULL_OVERRIDE)
+			crtc_state->vrr.pipeline_full =
+				REG_FIELD_GET(VRR_CTL_PIPELINE_FULL_MASK, trans_vrr_ctl);
+	if (trans_vrr_ctl & VRR_CTL_FLIP_LINE_EN)
+		crtc_state->vrr.flipline = intel_de_read(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder)) + 1;
+	crtc_state->vrr.vmax = intel_de_read(dev_priv, TRANS_VRR_VMAX(cpu_transcoder)) + 1;
+	crtc_state->vrr.vmin = intel_de_read(dev_priv, TRANS_VRR_VMIN(cpu_transcoder)) + 1;
+
+	crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
+}