diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_vrr.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_vrr.c | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c new file mode 100644 index 000000000..5eac99021 --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_vrr.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2020 Intel Corporation + * + */ + +#include "i915_drv.h" +#include "intel_de.h" +#include "intel_display_types.h" +#include "intel_vrr.h" + +bool intel_vrr_is_capable(struct intel_connector *connector) +{ + const struct drm_display_info *info = &connector->base.display_info; + struct drm_i915_private *i915 = to_i915(connector->base.dev); + struct intel_dp *intel_dp; + + /* + * DP Sink is capable of VRR video timings if + * Ignore MSA bit is set in DPCD. + * EDID monitor range also should be atleast 10 for reasonable + * Adaptive Sync or Variable Refresh Rate end user experience. + */ + switch (connector->base.connector_type) { + case DRM_MODE_CONNECTOR_eDP: + if (!connector->panel.vbt.vrr) + return false; + fallthrough; + case DRM_MODE_CONNECTOR_DisplayPort: + intel_dp = intel_attached_dp(connector); + + if (!drm_dp_sink_can_do_video_without_timing_msa(intel_dp->dpcd)) + return false; + + break; + default: + return false; + } + + return HAS_VRR(i915) && + info->monitor_range.max_vfreq - info->monitor_range.min_vfreq > 10; +} + +void +intel_vrr_check_modeset(struct intel_atomic_state *state) +{ + int i; + struct intel_crtc_state *old_crtc_state, *new_crtc_state; + struct intel_crtc *crtc; + + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, + new_crtc_state, i) { + if (new_crtc_state->uapi.vrr_enabled != + old_crtc_state->uapi.vrr_enabled) + new_crtc_state->uapi.mode_changed = true; + } +} + +/* + * Without VRR registers get latched at: + * vblank_start + * + * With VRR the earliest registers can get latched is: + * intel_vrr_vmin_vblank_start(), which if we want to maintain + * the correct min vtotal is >=vblank_start+1 + * + * The latest point registers can get latched is the vmax decision boundary: + * intel_vrr_vmax_vblank_start() + * + * Between those two points the vblank exit starts (and hence registers get + * latched) ASAP after a push is sent. + * + * framestart_delay is programmable 1-4. + */ +static int intel_vrr_vblank_exit_length(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *i915 = to_i915(crtc->base.dev); + + /* The hw imposes the extra scanline before frame start */ + if (DISPLAY_VER(i915) >= 13) + return crtc_state->vrr.guardband + crtc_state->framestart_delay + 1; + else + return crtc_state->vrr.pipeline_full + crtc_state->framestart_delay + 1; +} + +int intel_vrr_vmin_vblank_start(const struct intel_crtc_state *crtc_state) +{ + /* Min vblank actually determined by flipline that is always >=vmin+1 */ + return crtc_state->vrr.vmin + 1 - intel_vrr_vblank_exit_length(crtc_state); +} + +int intel_vrr_vmax_vblank_start(const struct intel_crtc_state *crtc_state) +{ + return crtc_state->vrr.vmax - intel_vrr_vblank_exit_length(crtc_state); +} + +void +intel_vrr_compute_config(struct intel_crtc_state *crtc_state, + struct drm_connector_state *conn_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *i915 = to_i915(crtc->base.dev); + struct intel_connector *connector = + to_intel_connector(conn_state->connector); + struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; + const struct drm_display_info *info = &connector->base.display_info; + int vmin, vmax; + + if (!intel_vrr_is_capable(connector)) + return; + + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) + return; + + if (!crtc_state->uapi.vrr_enabled) + return; + + vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000, + adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq); + vmax = adjusted_mode->crtc_clock * 1000 / + (adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq); + + vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal); + vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal); + + if (vmin >= vmax) + return; + + /* + * flipline determines the min vblank length the hardware will + * generate, and flipline>=vmin+1, hence we reduce vmin by one + * to make sure we can get the actual min vblank length. + */ + crtc_state->vrr.vmin = vmin - 1; + crtc_state->vrr.vmax = vmax; + crtc_state->vrr.enable = true; + + crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1; + + /* + * For XE_LPD+, we use guardband and pipeline override + * is deprecated. + */ + if (DISPLAY_VER(i915) >= 13) { + /* + * FIXME: Subtract Window2 delay from below value. + * + * Window2 specifies time required to program DSB (Window2) in + * number of scan lines. Assuming 0 for no DSB. + */ + crtc_state->vrr.guardband = + crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay; + } else { + /* + * FIXME: s/4/framestart_delay/ to get consistent + * earliest/latest points for register latching regardless + * of the framestart_delay used? + * + * FIXME: this really needs the extra scanline to provide consistent + * behaviour for all framestart_delay values. Otherwise with + * framestart_delay==4 we will end up extending the min vblank by + * one extra line. + */ + crtc_state->vrr.pipeline_full = + min(255, crtc_state->vrr.vmin - adjusted_mode->crtc_vdisplay - 4 - 1); + } + + crtc_state->mode_flags |= I915_MODE_FLAG_VRR; +} + +void intel_vrr_enable(struct intel_encoder *encoder, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 trans_vrr_ctl; + + if (!crtc_state->vrr.enable) + return; + + if (DISPLAY_VER(dev_priv) >= 13) + trans_vrr_ctl = VRR_CTL_VRR_ENABLE | + VRR_CTL_IGN_MAX_SHIFT | VRR_CTL_FLIP_LINE_EN | + XELPD_VRR_CTL_VRR_GUARDBAND(crtc_state->vrr.guardband); + else + trans_vrr_ctl = VRR_CTL_VRR_ENABLE | + VRR_CTL_IGN_MAX_SHIFT | VRR_CTL_FLIP_LINE_EN | + VRR_CTL_PIPELINE_FULL(crtc_state->vrr.pipeline_full) | + VRR_CTL_PIPELINE_FULL_OVERRIDE; + + intel_de_write(dev_priv, TRANS_VRR_VMIN(cpu_transcoder), crtc_state->vrr.vmin - 1); + intel_de_write(dev_priv, TRANS_VRR_VMAX(cpu_transcoder), crtc_state->vrr.vmax - 1); + intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), trans_vrr_ctl); + intel_de_write(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder), crtc_state->vrr.flipline - 1); + intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), TRANS_PUSH_EN); +} + +void intel_vrr_send_push(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + + if (!crtc_state->vrr.enable) + return; + + intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), + TRANS_PUSH_EN | TRANS_PUSH_SEND); +} + +bool intel_vrr_is_push_sent(const struct intel_crtc_state *crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + + if (!crtc_state->vrr.enable) + return false; + + return intel_de_read(dev_priv, TRANS_PUSH(cpu_transcoder)) & TRANS_PUSH_SEND; +} + +void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state) +{ + struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; + + if (!old_crtc_state->vrr.enable) + return; + + intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), 0); + intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), 0); +} + +void intel_vrr_get_config(struct intel_crtc *crtc, + struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; + u32 trans_vrr_ctl; + + trans_vrr_ctl = intel_de_read(dev_priv, TRANS_VRR_CTL(cpu_transcoder)); + crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE; + if (!crtc_state->vrr.enable) + return; + + if (DISPLAY_VER(dev_priv) >= 13) + crtc_state->vrr.guardband = + REG_FIELD_GET(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, trans_vrr_ctl); + else + if (trans_vrr_ctl & VRR_CTL_PIPELINE_FULL_OVERRIDE) + crtc_state->vrr.pipeline_full = + REG_FIELD_GET(VRR_CTL_PIPELINE_FULL_MASK, trans_vrr_ctl); + if (trans_vrr_ctl & VRR_CTL_FLIP_LINE_EN) + crtc_state->vrr.flipline = intel_de_read(dev_priv, TRANS_VRR_FLIPLINE(cpu_transcoder)) + 1; + crtc_state->vrr.vmax = intel_de_read(dev_priv, TRANS_VRR_VMAX(cpu_transcoder)) + 1; + crtc_state->vrr.vmin = intel_de_read(dev_priv, TRANS_VRR_VMIN(cpu_transcoder)) + 1; + + crtc_state->mode_flags |= I915_MODE_FLAG_VRR; +} |