1 files changed, 225 insertions, 0 deletions
diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/bitbash/spi_bit.c b/debian/grub-extras/disabled/gpxe/src/drivers/bitbash/spi_bit.c
new file mode 100644
index 0000000..8e70393
--- /dev/null
+++ b/debian/grub-extras/disabled/gpxe/src/drivers/bitbash/spi_bit.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) 2006 Michael Brown <mbrown@fensystems.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+#include <byteswap.h>
+#include <errno.h>
+#include <assert.h>
+#include <unistd.h>
+#include <gpxe/bitbash.h>
+#include <gpxe/spi_bit.h>
+
+/** @file
+ *
+ * SPI bit-bashing interface
+ *
+ */
+
+/** Delay between SCLK changes and around SS changes */
+static void spi_bit_delay ( void ) {
+	udelay ( SPI_BIT_UDELAY );
+}
+
+/** Chip select line will be asserted */
+#define SELECT_SLAVE 0
+
+/** Chip select line will be deasserted */
+#define DESELECT_SLAVE SPI_MODE_SSPOL
+
+/**
+ * Select/deselect slave
+ *
+ * @v spibit		SPI bit-bashing interface
+ * @v slave		Slave number
+ * @v state		Slave select state
+ *
+ * @c state must be @c SELECT_SLAVE or @c DESELECT_SLAVE.
+ */
+static void spi_bit_set_slave_select ( struct spi_bit_basher *spibit,
+				       unsigned int slave,
+				       unsigned int state ) {
+	struct bit_basher *basher = &spibit->basher;
+
+	state ^= ( spibit->bus.mode & SPI_MODE_SSPOL );
+	DBGC2 ( spibit, "SPIBIT %p setting slave %d select %s\n",
+		spibit, slave, ( state ? "high" : "low" ) );
+
+	spi_bit_delay();
+	write_bit ( basher, SPI_BIT_SS ( slave ), state );
+	spi_bit_delay();
+}
+
+/**
+ * Transfer bits over SPI bit-bashing bus
+ *
+ * @v bus		SPI bus
+ * @v data_out		TX data buffer (or NULL)
+ * @v data_in		RX data buffer (or NULL)
+ * @v len		Length of transfer (in @b bits)
+ * @v endianness	Endianness of this data transfer
+ *
+ * This issues @c len clock cycles on the SPI bus, shifting out data
+ * from the @c data_out buffer to the MOSI line and shifting in data
+ * from the MISO line to the @c data_in buffer.  If @c data_out is
+ * NULL, then the data sent will be all zeroes.  If @c data_in is
+ * NULL, then the incoming data will be discarded.
+ */
+static void spi_bit_transfer ( struct spi_bit_basher *spibit,
+			       const void *data_out, void *data_in,
+			       unsigned int len, int endianness ) {
+	struct spi_bus *bus = &spibit->bus;
+	struct bit_basher *basher = &spibit->basher;
+	unsigned int sclk = ( ( bus->mode & SPI_MODE_CPOL ) ? 1 : 0 );
+	unsigned int cpha = ( ( bus->mode & SPI_MODE_CPHA ) ? 1 : 0 );
+	unsigned int bit_offset;
+	unsigned int byte_offset;
+	unsigned int byte_mask;
+	unsigned int bit;
+	unsigned int step;
+
+	DBGC2 ( spibit, "SPIBIT %p transferring %d bits in mode %#x\n",
+		spibit, len, bus->mode );
+
+	for ( step = 0 ; step < ( len * 2 ) ; step++ ) {
+		/* Calculate byte offset and byte mask */
+		bit_offset = ( ( endianness == SPI_BIT_BIG_ENDIAN ) ?
+			       ( len - ( step / 2 ) - 1 ) : ( step / 2 ) );
+		byte_offset = ( bit_offset / 8 );
+		byte_mask = ( 1 << ( bit_offset % 8 ) );
+
+		/* Shift data in or out */
+		if ( sclk == cpha ) {
+			const uint8_t *byte;
+
+			/* Shift data out */
+			if ( data_out ) {
+				byte = ( data_out + byte_offset );
+				bit = ( *byte & byte_mask );
+				DBGCP ( spibit, "SPIBIT %p wrote bit %d\n",
+					spibit, ( bit ? 1 : 0 ) );
+			} else {
+				bit = 0;
+			}
+			write_bit ( basher, SPI_BIT_MOSI, bit );
+		} else {
+			uint8_t *byte;
+
+			/* Shift data in */
+			bit = read_bit ( basher, SPI_BIT_MISO );
+			if ( data_in ) {
+				DBGCP ( spibit, "SPIBIT %p read bit %d\n",
+					spibit, ( bit ? 1 : 0 ) );
+				byte = ( data_in + byte_offset );
+				*byte &= ~byte_mask;
+				*byte |= ( bit & byte_mask );
+			}
+		}
+
+		/* Toggle clock line */
+		spi_bit_delay();
+		sclk ^= 1;
+		write_bit ( basher, SPI_BIT_SCLK, sclk );
+	}
+}
+
+/**
+ * Read/write data via SPI bit-bashing bus
+ *
+ * @v bus		SPI bus
+ * @v device		SPI device
+ * @v command		Command
+ * @v address		Address to read/write (<0 for no address)
+ * @v data_out		TX data buffer (or NULL)
+ * @v data_in		RX data buffer (or NULL)
+ * @v len		Length of transfer
+ * @ret rc		Return status code
+ */
+static int spi_bit_rw ( struct spi_bus *bus, struct spi_device *device,
+			unsigned int command, int address,
+			const void *data_out, void *data_in, size_t len ) {
+	struct spi_bit_basher *spibit
+		= container_of ( bus, struct spi_bit_basher, bus );
+	uint32_t tmp_command;
+	uint32_t tmp_address;
+	uint32_t tmp_address_detect;
+
+	/* Set clock line to idle state */
+	write_bit ( &spibit->basher, SPI_BIT_SCLK, 
+		    ( bus->mode & SPI_MODE_CPOL ) );
+
+	/* Assert chip select on specified slave */
+	spi_bit_set_slave_select ( spibit, device->slave, SELECT_SLAVE );
+
+	/* Transmit command */
+	assert ( device->command_len <= ( 8 * sizeof ( tmp_command ) ) );
+	tmp_command = cpu_to_le32 ( command );
+	spi_bit_transfer ( spibit, &tmp_command, NULL, device->command_len,
+			   SPI_BIT_BIG_ENDIAN );
+
+	/* Transmit address, if present */
+	if ( address >= 0 ) {
+		assert ( device->address_len <= ( 8 * sizeof ( tmp_address )));
+		tmp_address = cpu_to_le32 ( address );
+		if ( device->address_len == SPI_AUTODETECT_ADDRESS_LEN ) {
+			/* Autodetect address length.  This relies on
+			 * the device responding with a dummy zero
+			 * data bit before the first real data bit.
+			 */
+			DBGC ( spibit, "SPIBIT %p autodetecting device "
+			       "address length\n", spibit );
+			assert ( address == 0 );
+			device->address_len = 0;
+			do {
+				spi_bit_transfer ( spibit, &tmp_address,
+						   &tmp_address_detect, 1,
+						   SPI_BIT_BIG_ENDIAN );
+				device->address_len++;
+			} while ( le32_to_cpu ( tmp_address_detect ) & 1 );
+			DBGC ( spibit, "SPIBIT %p autodetected device address "
+			       "length %d\n", spibit, device->address_len );
+		} else {
+			spi_bit_transfer ( spibit, &tmp_address, NULL,
+					   device->address_len,
+					   SPI_BIT_BIG_ENDIAN );
+		}
+	}
+
+	/* Transmit/receive data */
+	spi_bit_transfer ( spibit, data_out, data_in, ( len * 8 ),
+			   spibit->endianness );
+
+	/* Deassert chip select on specified slave */
+	spi_bit_set_slave_select ( spibit, device->slave, DESELECT_SLAVE );
+
+	return 0;
+}
+
+/**
+ * Initialise SPI bit-bashing interface
+ *
+ * @v spibit		SPI bit-bashing interface
+ */
+void init_spi_bit_basher ( struct spi_bit_basher *spibit ) {
+	assert ( &spibit->basher.op->read != NULL );
+	assert ( &spibit->basher.op->write != NULL );
+	spibit->bus.rw = spi_bit_rw;
+}