diff options
Diffstat (limited to 'debian/grub-extras/disabled/gpxe/src/drivers/net/3c515.c')
| -rw-r--r-- | debian/grub-extras/disabled/gpxe/src/drivers/net/3c515.c | 763 |
1 files changed, 763 insertions, 0 deletions
diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/net/3c515.c b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c515.c new file mode 100644 index 0000000..eb9569f --- /dev/null +++ b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c515.c @@ -0,0 +1,763 @@ +/* +* 3c515.c -- 3COM 3C515 Fast Etherlink ISA 10/100BASE-TX driver for etherboot +* Copyright (C) 2002 Timothy Legge <tlegge@rogers.com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +* +* Portions of this code: +* Copyright (C) 1997-2002 Donald Becker 3c515.c: A 3Com ISA EtherLink XL "Corkscrew" ethernet driver for linux. +* Copyright (C) 2001 P.J.H.Fox (fox@roestock.demon.co.uk) ISAPNP Tools +* Copyright (c) 2002 Jaroslav Kysela <perex@suse.cz> ISA Plug & Play support Linux Kernel +* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp> etherboot-5.0.5 3c595.c +* Coptright (C) 1995 Martin Renters etherboot-5.0.5 3c509.c +* Copyright (C) 1999 LightSys Technology Services, Inc. etherboot-5.0.5 3c90x.c +* Portions Copyright (C) 1999 Steve Smith etherboot-5.0.5 3c90x.c +* +* The probe and reset functions and defines are direct copies from the +* Becker code modified where necessary to make it work for etherboot +* +* The poll and transmit functions either contain code from or were written by referencing +* the above referenced etherboot drivers. This driver would not have been +* possible without this prior work +* +* REVISION HISTORY: +* ================ +* v0.10 4-17-2002 TJL Initial implementation. +* v0.11 4-17-2002 TJL Cleanup of the code +* v0.12 4-26-2002 TJL Added ISA Plug and Play for Non-PNP Bioses +* v0.13 6-10-2002 TJL Fixed ISA_PNP MAC Address problem +* v0.14 9-23-2003 TJL Replaced delay with currticks +* +* Indent Options: indent -kr -i8 +* *********************************************************/ + +FILE_LICENCE ( GPL2_OR_LATER ); + +/* to get some global routines like printf */ +#include "etherboot.h" +/* to get the interface to the body of the program */ +#include "nic.h" +#include <gpxe/isapnp.h> +#include <gpxe/isa.h> /* for ISA_ROM */ +#include <gpxe/ethernet.h> + +static void t3c515_wait(unsigned int nticks) +{ + unsigned int to = currticks() + nticks; + while (currticks() < to) + /* wait */ ; +} + +/* TJL definations */ +#define HZ 100 +static int if_port; +static struct corkscrew_private *vp; +/* Brought directly from 3c515.c by Becker */ +#define CORKSCREW 1 + +/* Maximum events (Rx packets, etc.) to handle at each interrupt. +static int max_interrupt_work = 20; +*/ + +/* Enable the automatic media selection code -- usually set. */ +#define AUTOMEDIA 1 + +/* Allow the use of fragment bus master transfers instead of only + programmed-I/O for Vortex cards. Full-bus-master transfers are always + enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined, + the feature may be turned on using 'options'. */ +#define VORTEX_BUS_MASTER + +/* A few values that may be tweaked. */ +/* Keep the ring sizes a power of two for efficiency. */ +#define TX_RING_SIZE 16 +#define RX_RING_SIZE 16 +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ + +/* "Knobs" for adjusting internal parameters. */ +/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */ +#define DRIVER_DEBUG 1 +/* Some values here only for performance evaluation and path-coverage + debugging. +static int rx_nocopy, rx_copy, queued_packet; +*/ + +#define CORKSCREW_ID 10 + +#define EL3WINDOW(win_num) \ + outw(SelectWindow + (win_num), nic->ioaddr + EL3_CMD) +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e +#define RX_BYTES_MASK (unsigned short) (0x07ff) + +enum corkscrew_cmd { + TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11, + RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11, + UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, + DownStall = (6 << 11) + 2, DownUnstall = (6 << 11) + 3, + RxDiscard = 8 << 11, TxEnable = 9 << 11, TxDisable = + 10 << 11, TxReset = 11 << 11, + FakeIntr = 12 << 11, AckIntr = 13 << 11, SetIntrEnb = 14 << 11, + SetStatusEnb = 15 << 11, SetRxFilter = 16 << 11, SetRxThreshold = + 17 << 11, + SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, + StartDMAUp = 20 << 11, StartDMADown = (20 << 11) + 1, StatsEnable = + 21 << 11, + StatsDisable = 22 << 11, StopCoax = 23 << 11, +}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 +}; + +/* Bits in the general status register. */ +enum corkscrew_status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, + DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10, + DMAInProgress = 1 << 11, /* DMA controller is still busy. */ + CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B, + TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ +}; +enum Window0 { + Wn0IRQ = 0x08, +#if defined(CORKSCREW) + Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */ + Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */ +#else + Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ + Wn0EepromData = 12, /* Window 0: EEPROM results register. */ +#endif +}; +enum Win0_EEPROM_bits { + EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; + +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8, +}; +union wn3_config { + int i; + struct w3_config_fields { + unsigned int ram_size:3, ram_width:1, ram_speed:2, + rom_size:2; + int pad8:8; + unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1, + autoselect:1; + int pad24:7; + } u; +}; + +enum Window4 { + Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */ +}; +enum Win4_Media_bits { + Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ + Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ + Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ + Media_LnkBeat = 0x0800, +}; +enum Window7 { /* Window 7: Bus Master control. */ + Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12, +}; + +/* Boomerang-style bus master control registers. Note ISA aliases! */ +enum MasterCtrl { + PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen = + 0x40c, + TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418, +}; + +/* The Rx and Tx descriptor lists. + Caution Alpha hackers: these types are 32 bits! Note also the 8 byte + alignment contraint on tx_ring[] and rx_ring[]. */ +struct boom_rx_desc { + u32 next; + s32 status; + u32 addr; + s32 length; +}; + +/* Values for the Rx status entry. */ +enum rx_desc_status { + RxDComplete = 0x00008000, RxDError = 0x4000, + /* See boomerang_rx() for actual error bits */ +}; + +struct boom_tx_desc { + u32 next; + s32 status; + u32 addr; + s32 length; +}; + +struct corkscrew_private { + const char *product_name; + struct net_device *next_module; + /* The Rx and Tx rings are here to keep them quad-word-aligned. */ + struct boom_rx_desc rx_ring[RX_RING_SIZE]; + struct boom_tx_desc tx_ring[TX_RING_SIZE]; + /* The addresses of transmit- and receive-in-place skbuffs. */ + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ + int capabilities; /* Adapter capabilities word. */ + int options; /* User-settable misc. driver options. */ + int last_rx_packets; /* For media autoselection. */ + unsigned int available_media:8, /* From Wn3_Options */ + media_override:3, /* Passed-in media type. */ + default_media:3, /* Read from the EEPROM. */ + full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ + full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */ + tx_full:1; +}; + +/* The action to take with a media selection timer tick. + Note that we deviate from the 3Com order by checking 10base2 before AUI. + */ +enum xcvr_types { + XCVR_10baseT = + 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, + XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8, +}; + +static struct media_table { + char *name; + unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ + mask:8, /* The transceiver-present bit in Wn3_Config. */ + next:8; /* The media type to try next. */ + short wait; /* Time before we check media status. */ +} media_tbl[] = { + { + "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10} + , { + "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10} + , { + "undefined", 0, 0x80, XCVR_10baseT, 10000} + , { + "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10} + , { + "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, + (14 * HZ) / 10} + , { + "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10} + , { + "MII", 0, 0x40, XCVR_10baseT, 3 * HZ} + , { + "undefined", 0, 0x01, XCVR_10baseT, 10000} + , { + "Default", 0, 0xFF, XCVR_10baseT, 10000} +,}; + +/* TILEG Modified to remove reference to dev */ +static int corkscrew_found_device(int ioaddr, int irq, int product_index, + int options, struct nic *nic); +static int corkscrew_probe1(int ioaddr, int irq, int product_index, + struct nic *nic); + +/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ +/* Note: this is the only limit on the number of cards supported!! */ +static int options = -1; + +/* End Brought directly from 3c515.c by Becker */ + +/************************************************************************** +RESET - Reset adapter +***************************************************************************/ +static void t515_reset(struct nic *nic) +{ + union wn3_config config; + int i; + + /* Before initializing select the active media port. */ + EL3WINDOW(3); + if (vp->full_duplex) + outb(0x20, nic->ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */ + config.i = inl(nic->ioaddr + Wn3_Config); + + if (vp->media_override != 7) { + DBG ( "Media override to transceiver %d (%s).\n", + vp->media_override, + media_tbl[vp->media_override].name); + if_port = vp->media_override; + } else if (vp->autoselect) { + /* Find first available media type, starting with 100baseTx. */ + if_port = 4; + while (!(vp->available_media & media_tbl[if_port].mask)) + if_port = media_tbl[if_port].next; + + DBG ( "Initial media type %s.\n", + media_tbl[if_port].name); + } else + if_port = vp->default_media; + + config.u.xcvr = if_port; + outl(config.i, nic->ioaddr + Wn3_Config); + + DBG ( "corkscrew_open() InternalConfig 0x%hX.\n", + config.i); + + outw(TxReset, nic->ioaddr + EL3_CMD); + for (i = 20; i >= 0; i--) + if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress)) + break; + + outw(RxReset, nic->ioaddr + EL3_CMD); + /* Wait a few ticks for the RxReset command to complete. */ + for (i = 20; i >= 0; i--) + if (!(inw(nic->ioaddr + EL3_STATUS) & CmdInProgress)) + break; + + outw(SetStatusEnb | 0x00, nic->ioaddr + EL3_CMD); + +#ifdef debug_3c515 + EL3WINDOW(4); + DBG ( "FIXME: fix print for irq, not 9" ); + DBG ( "corkscrew_open() irq %d media status 0x%hX.\n", + 9, inw(nic->ioaddr + Wn4_Media) ); +#endif + + /* Set the station address and mask in window 2 each time opened. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(nic->node_addr[i], nic->ioaddr + i); + for (; i < 12; i += 2) + outw(0, nic->ioaddr + i); + + if (if_port == 3) + /* Start the thinnet transceiver. We should really wait 50ms... */ + outw(StartCoax, nic->ioaddr + EL3_CMD); + EL3WINDOW(4); + outw((inw(nic->ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) | + media_tbl[if_port].media_bits, nic->ioaddr + Wn4_Media); + + /* Switch to the stats window, and clear all stats by reading. */ +/* outw(StatsDisable, nic->ioaddr + EL3_CMD);*/ + EL3WINDOW(6); + for (i = 0; i < 10; i++) + inb(nic->ioaddr + i); + inw(nic->ioaddr + 10); + inw(nic->ioaddr + 12); + /* New: On the Vortex we must also clear the BadSSD counter. */ + EL3WINDOW(4); + inb(nic->ioaddr + 12); + /* ..and on the Boomerang we enable the extra statistics bits. */ + outw(0x0040, nic->ioaddr + Wn4_NetDiag); + + /* Switch to register set 7 for normal use. */ + EL3WINDOW(7); + + /* Temporarily left in place. If these FIXMEs are printed + it meand that special logic for that card may need to be added + see Becker's 3c515.c driver */ + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + printf("FIXME: Is this if necessary"); + vp->cur_rx = vp->dirty_rx = 0; + DBG ( " Filling in the Rx ring.\n" ); + for (i = 0; i < RX_RING_SIZE; i++) { + printf("FIXME: Is this if necessary"); + } + } + if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ + vp->cur_tx = vp->dirty_tx = 0; + outb(PKT_BUF_SZ >> 8, nic->ioaddr + TxFreeThreshold); /* Room for a packet. */ + /* Clear the Tx ring. */ + for (i = 0; i < TX_RING_SIZE; i++) + vp->tx_skbuff[i] = 0; + outl(0, nic->ioaddr + DownListPtr); + } + /* Set receiver mode: presumably accept b-case and phys addr only. */ + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, + nic->ioaddr + EL3_CMD); + + outw(RxEnable, nic->ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, nic->ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull | + (vp->full_bus_master_tx ? DownComplete : TxAvailable) | + (vp->full_bus_master_rx ? UpComplete : RxComplete) | + (vp->bus_master ? DMADone : 0), nic->ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + nic->ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete, + nic->ioaddr + EL3_CMD); + +} + +/************************************************************************** +POLL - Wait for a frame +***************************************************************************/ +static int t515_poll(struct nic *nic, int retrieve) +{ + short status, cst; + register short rx_fifo; + + cst = inw(nic->ioaddr + EL3_STATUS); + + if ((cst & RxComplete) == 0) { + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + nic->ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | + StatsFull | (vp-> + bus_master ? DMADone : 0) | UpComplete | + DownComplete, nic->ioaddr + EL3_CMD); + return 0; + } + status = inw(nic->ioaddr + RxStatus); + + if (status & RxDError) { + printf("RxDError\n"); + outw(RxDiscard, nic->ioaddr + EL3_CMD); + return 0; + } + + rx_fifo = status & RX_BYTES_MASK; + if (rx_fifo == 0) + return 0; + + if ( ! retrieve ) return 1; + + DBG ( "[l=%d", rx_fifo ); + insw(nic->ioaddr + RX_FIFO, nic->packet, rx_fifo / 2); + if (rx_fifo & 1) + nic->packet[rx_fifo - 1] = inb(nic->ioaddr + RX_FIFO); + nic->packetlen = rx_fifo; + + while (1) { + status = inw(nic->ioaddr + RxStatus); + DBG ( "0x%hX*", status ); + rx_fifo = status & RX_BYTES_MASK; + + if (rx_fifo > 0) { + insw(nic->ioaddr + RX_FIFO, nic->packet + nic->packetlen, + rx_fifo / 2); + if (rx_fifo & 1) + nic->packet[nic->packetlen + rx_fifo - 1] = + inb(nic->ioaddr + RX_FIFO); + nic->packetlen += rx_fifo; + DBG ( "+%d", rx_fifo ); + } + if ((status & RxComplete) == 0) { + DBG ( "=%d", nic->packetlen ); + break; + } + udelay(1000); + } + + /* acknowledge reception of packet */ + outw(RxDiscard, nic->ioaddr + EL3_CMD); + while (inw(nic->ioaddr + EL3_STATUS) & CmdInProgress); +#ifdef debug_3c515 + { + unsigned short type = 0; + type = (nic->packet[12] << 8) | nic->packet[13]; + if (nic->packet[0] + nic->packet[1] + nic->packet[2] + + nic->packet[3] + nic->packet[4] + nic->packet[5] == + 0xFF * ETH_ALEN) + DBG ( ",t=0x%hX,b]", type ); + else + DBG ( ",t=0x%hX]", type ); + } +#endif + + return 1; +} + +/************************************************************************* + 3Com 515 - specific routines +**************************************************************************/ +static char padmap[] = { + 0, 3, 2, 1 +}; +/************************************************************************** +TRANSMIT - Transmit a frame +***************************************************************************/ +static void t515_transmit(struct nic *nic, const char *d, /* Destination */ + unsigned int t, /* Type */ + unsigned int s, /* size */ + const char *p) +{ /* Packet */ + register int len; + int pad; + int status; + + DBG ( "{l=%d,t=0x%hX}", s + ETH_HLEN, t ); + + /* swap bytes of type */ + t = htons(t); + + len = s + ETH_HLEN; /* actual length of packet */ + pad = padmap[len & 3]; + + /* + * The 3c515 automatically pads short packets to minimum ethernet length, + * but we drop packets that are too large. Perhaps we should truncate + * them instead? + Copied from 3c595. Is this true for the 3c515? + */ + if (len + pad > ETH_FRAME_LEN) { + return; + } + /* drop acknowledgements */ + while ((status = inb(nic->ioaddr + TxStatus)) & TxComplete) { + /*if(status & (TXS_UNDERRUN|0x88|TXS_STATUS_OVERFLOW)) { */ + outw(TxReset, nic->ioaddr + EL3_CMD); + outw(TxEnable, nic->ioaddr + EL3_CMD); +/* } */ + + outb(0x0, nic->ioaddr + TxStatus); + } + + while (inw(nic->ioaddr + TxFree) < len + pad + 4) { + /* no room in FIFO */ + } + + outw(len, nic->ioaddr + TX_FIFO); + outw(0x0, nic->ioaddr + TX_FIFO); /* Second dword meaningless */ + + /* write packet */ + outsw(nic->ioaddr + TX_FIFO, d, ETH_ALEN / 2); + outsw(nic->ioaddr + TX_FIFO, nic->node_addr, ETH_ALEN / 2); + outw(t, nic->ioaddr + TX_FIFO); + outsw(nic->ioaddr + TX_FIFO, p, s / 2); + + if (s & 1) + outb(*(p + s - 1), nic->ioaddr + TX_FIFO); + + while (pad--) + outb(0, nic->ioaddr + TX_FIFO); /* Padding */ + + /* wait for Tx complete */ + while ((inw(nic->ioaddr + EL3_STATUS) & CmdInProgress) != 0); +} + +/************************************************************************** +DISABLE - Turn off ethernet interface +***************************************************************************/ +static void t515_disable ( struct nic *nic, + struct isapnp_device *isapnp ) { + + t515_reset(nic); + + /* This is a hack. Since ltsp worked on my + system without any disable functionality I + have no way to determine if this works */ + + /* Disable the receiver and transmitter. */ + outw(RxDisable, nic->ioaddr + EL3_CMD); + outw(TxDisable, nic->ioaddr + EL3_CMD); + + if (if_port == XCVR_10base2) + /* Turn off thinnet power. Green! */ + outw(StopCoax, nic->ioaddr + EL3_CMD); + + + outw(SetIntrEnb | 0x0000, nic->ioaddr + EL3_CMD); + + deactivate_isapnp_device ( isapnp ); + return; +} + +static void t515_irq(struct nic *nic __unused, irq_action_t action __unused) +{ + switch ( action ) { + case DISABLE : + break; + case ENABLE : + break; + case FORCE : + break; + } +} + +static struct nic_operations t515_operations = { + .connect = dummy_connect, + .poll = t515_poll, + .transmit = t515_transmit, + .irq = t515_irq, + +}; + +/************************************************************************** +PROBE - Look for an adapter, this routine's visible to the outside +You should omit the last argument struct pci_device * for a non-PCI NIC +***************************************************************************/ +static int t515_probe ( struct nic *nic, struct isapnp_device *isapnp ) { + + /* Direct copy from Beckers 3c515.c removing any ISAPNP sections */ + + nic->ioaddr = isapnp->ioaddr; + nic->irqno = isapnp->irqno; + activate_isapnp_device ( isapnp ); + + /* Check the resource configuration for a matching ioaddr. */ + if ((unsigned)(inw(nic->ioaddr + 0x2002) & 0x1f0) + != (nic->ioaddr & 0x1f0)) { + DBG ( "3c515 ioaddr mismatch\n" ); + return 0; + } + + /* Verify by reading the device ID from the EEPROM. */ + { + int timer; + outw(EEPROM_Read + 7, nic->ioaddr + Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 4; timer >= 0; timer--) { + t3c515_wait(1); + if ((inw(nic->ioaddr + Wn0EepromCmd) & 0x0200) == 0) + break; + } + if (inw(nic->ioaddr + Wn0EepromData) != 0x6d50) { + DBG ( "3c515 read incorrect vendor ID from EEPROM" ); + return 0; + } + + } + DBG ( "3c515 Resource configuration register 0x%X, DCR 0x%hX.\n", + inl(nic->ioaddr + 0x2002), inw(nic->ioaddr + 0x2000) ); + corkscrew_found_device(nic->ioaddr, nic->irqno, CORKSCREW_ID, + options, nic); + + t515_reset(nic); + nic->nic_op = &t515_operations; + return 1; +} + +static int +corkscrew_found_device(int ioaddr, int irq, + int product_index, int options, struct nic *nic) +{ + /* Direct copy from Becker 3c515.c with unecessary parts removed */ + vp->product_name = "3c515"; + vp->options = options; + if (options >= 0) { + vp->media_override = + ((options & 7) == 2) ? 0 : options & 7; + vp->full_duplex = (options & 8) ? 1 : 0; + vp->bus_master = (options & 16) ? 1 : 0; + } else { + vp->media_override = 7; + vp->full_duplex = 0; + vp->bus_master = 0; + } + + corkscrew_probe1(ioaddr, irq, product_index, nic); + return 0; +} + +static int +corkscrew_probe1(int ioaddr, int irq, int product_index __unused, + struct nic *nic) +{ + unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ + int i; + + printf("3Com %s at 0x%hX, ", vp->product_name, ioaddr); + + /* Read the station address from the EEPROM. */ + EL3WINDOW(0); + for (i = 0; i < 0x18; i++) { + short *phys_addr = (short *) nic->node_addr; + int timer; + outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 4; timer >= 0; timer--) { + t3c515_wait(1); + if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0) + break; + } + eeprom[i] = inw(ioaddr + Wn0EepromData); + DBG ( "Value %d: %hX ", i, eeprom[i] ); + checksum ^= eeprom[i]; + if (i < 3) + phys_addr[i] = htons(eeprom[i]); + } + checksum = (checksum ^ (checksum >> 8)) & 0xff; + if (checksum != 0x00) + printf(" ***INVALID CHECKSUM 0x%hX*** ", checksum); + + DBG ( "%s", eth_ntoa ( nic->node_addr ) ); + + if (eeprom[16] == 0x11c7) { /* Corkscrew */ + + } + printf(", IRQ %d\n", irq); + /* Tell them about an invalid IRQ. */ + if ( (irq <= 0 || irq > 15) ) { + DBG (" *** Warning: this IRQ is unlikely to work! ***\n" ); + } + + { + char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" }; + union wn3_config config; + EL3WINDOW(3); + vp->available_media = inw(ioaddr + Wn3_Options); + config.i = inl(ioaddr + Wn3_Config); + DBG ( " Internal config register is %4.4x, " + "transceivers 0x%hX.\n", + config.i, inw(ioaddr + Wn3_Options) ); + printf + (" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + 8 << config.u.ram_size, + config.u.ram_width ? "word" : "byte", + ram_split[config.u.ram_split], + config.u.autoselect ? "autoselect/" : "", + media_tbl[config.u.xcvr].name); + if_port = config.u.xcvr; + vp->default_media = config.u.xcvr; + vp->autoselect = config.u.autoselect; + } + if (vp->media_override != 7) { + printf(" Media override to transceiver type %d (%s).\n", + vp->media_override, + media_tbl[vp->media_override].name); + if_port = vp->media_override; + } + + vp->capabilities = eeprom[16]; + vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0; + /* Rx is broken at 10mbps, so we always disable it. */ + /* vp->full_bus_master_rx = 0; */ + vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0; + + return 0; +} + +static struct isapnp_device_id t515_adapters[] = { + { "3c515 (ISAPnP)", ISAPNP_VENDOR('T','C','M'), 0x5051 }, +}; + +ISAPNP_DRIVER ( t515_driver, t515_adapters ); + +DRIVER ( "3c515", nic_driver, isapnp_driver, t515_driver, + t515_probe, t515_disable ); + +ISA_ROM ( "3c515", "3c515 Fast EtherLink ISAPnP" ); |