summaryrefslogtreecommitdiffstats
path: root/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c
diff options
context:
space:
mode:
Diffstat (limited to 'debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c')
-rw-r--r--debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c553
1 files changed, 553 insertions, 0 deletions
diff --git a/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c
new file mode 100644
index 0000000..07c85d0
--- /dev/null
+++ b/debian/grub-extras/disabled/gpxe/src/drivers/net/3c595.c
@@ -0,0 +1,553 @@
+/*
+* 3c595.c -- 3COM 3C595 Fast Etherlink III PCI driver for etherboot
+*
+* Copyright (C) 2000 Shusuke Nisiyama <shu@athena.qe.eng.hokudai.ac.jp>
+* All rights reserved.
+* Mar. 14, 2000
+*
+* This software may be used, modified, copied, distributed, and sold, in
+* both source and binary form provided that the above copyright and these
+* terms are retained. Under no circumstances are the authors responsible for
+* the proper functioning of this software, nor do the authors assume any
+* responsibility for damages incurred with its use.
+*
+* This code is based on Martin Renters' etherboot-4.4.3 3c509.c and
+* Herb Peyerl's FreeBSD 3.4-RELEASE if_vx.c driver.
+*
+* Copyright (C) 1993-1994, David Greenman, Martin Renters.
+* Copyright (C) 1993-1995, Andres Vega Garcia.
+* Copyright (C) 1995, Serge Babkin.
+*
+* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
+*
+* timlegge 08-24-2003 Add Multicast Support
+*/
+
+FILE_LICENCE ( BSD2 );
+
+/* #define EDEBUG */
+
+#include "etherboot.h"
+#include "nic.h"
+#include <gpxe/pci.h>
+#include <gpxe/ethernet.h>
+#include "3c595.h"
+
+static struct nic_operations t595_operations;
+
+static unsigned short eth_nic_base;
+static unsigned short vx_connector, vx_connectors;
+
+static struct connector_entry {
+ int bit;
+ char *name;
+} conn_tab[VX_CONNECTORS] = {
+#define CONNECTOR_UTP 0
+ { 0x08, "utp"},
+#define CONNECTOR_AUI 1
+ { 0x20, "aui"},
+/* dummy */
+ { 0, "???"},
+#define CONNECTOR_BNC 3
+ { 0x10, "bnc"},
+#define CONNECTOR_TX 4
+ { 0x02, "tx"},
+#define CONNECTOR_FX 5
+ { 0x04, "fx"},
+#define CONNECTOR_MII 6
+ { 0x40, "mii"},
+ { 0, "???"}
+};
+
+static void vxgetlink(void);
+static void vxsetlink(void);
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+static void t595_reset(struct nic *nic)
+{
+ int i;
+
+ /***********************************************************
+ Reset 3Com 595 card
+ *************************************************************/
+
+ /* stop card */
+ outw(RX_DISABLE, BASE + VX_COMMAND);
+ outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+ outw(TX_DISABLE, BASE + VX_COMMAND);
+ outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+ udelay(8000);
+ outw(RX_RESET, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+ outw(TX_RESET, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+ outw(C_INTR_LATCH, BASE + VX_COMMAND);
+ outw(SET_RD_0_MASK, BASE + VX_COMMAND);
+ outw(SET_INTR_MASK, BASE + VX_COMMAND);
+ outw(SET_RX_FILTER, BASE + VX_COMMAND);
+
+ /*
+ * initialize card
+ */
+ VX_BUSY_WAIT;
+
+ GO_WINDOW(0);
+
+ /* Disable the card */
+/* outw(0, BASE + VX_W0_CONFIG_CTRL); */
+
+ /* Configure IRQ to none */
+/* outw(SET_IRQ(0), BASE + VX_W0_RESOURCE_CFG); */
+
+ /* Enable the card */
+/* outw(ENABLE_DRQ_IRQ, BASE + VX_W0_CONFIG_CTRL); */
+
+ GO_WINDOW(2);
+
+ /* Reload the ether_addr. */
+ for (i = 0; i < ETH_ALEN; i++)
+ outb(nic->node_addr[i], BASE + VX_W2_ADDR_0 + i);
+
+ outw(RX_RESET, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+ outw(TX_RESET, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+ /* Window 1 is operating window */
+ GO_WINDOW(1);
+ for (i = 0; i < 31; i++)
+ inb(BASE + VX_W1_TX_STATUS);
+
+ outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+ S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+ outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+ S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+
+/*
+ * Attempt to get rid of any stray interrupts that occured during
+ * configuration. On the i386 this isn't possible because one may
+ * already be queued. However, a single stray interrupt is
+ * unimportant.
+ */
+
+ outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+
+ outw(SET_RX_FILTER | FIL_INDIVIDUAL |
+ FIL_BRDCST|FIL_MULTICAST, BASE + VX_COMMAND);
+
+ vxsetlink();
+/*{
+ int i,j;
+ i = CONNECTOR_TX;
+ GO_WINDOW(3);
+ j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
+ outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
+ GO_WINDOW(4);
+ outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
+ GO_WINDOW(1);
+}*/
+
+ /* start tranciever and receiver */
+ outw(RX_ENABLE, BASE + VX_COMMAND);
+ outw(TX_ENABLE, BASE + VX_COMMAND);
+
+}
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+ 0, 3, 2, 1};
+
+static void t595_transmit(
+struct nic *nic,
+const char *d, /* Destination */
+unsigned int t, /* Type */
+unsigned int s, /* size */
+const char *p) /* Packet */
+{
+ register int len;
+ int pad;
+ int status;
+
+#ifdef EDEBUG
+ printf("{l=%d,t=%hX}",s+ETH_HLEN,t);
+#endif
+
+ /* swap bytes of type */
+ t= htons(t);
+
+ len=s+ETH_HLEN; /* actual length of packet */
+ pad = padmap[len & 3];
+
+ /*
+ * The 3c595 automatically pads short packets to minimum ethernet length,
+ * but we drop packets that are too large. Perhaps we should truncate
+ * them instead?
+ */
+ if (len + pad > ETH_FRAME_LEN) {
+ return;
+ }
+
+ /* drop acknowledgements */
+ while(( status=inb(BASE + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
+ if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+ outw(TX_RESET, BASE + VX_COMMAND);
+ outw(TX_ENABLE, BASE + VX_COMMAND);
+ }
+
+ outb(0x0, BASE + VX_W1_TX_STATUS);
+ }
+
+ while (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
+ /* no room in FIFO */
+ }
+
+ outw(len, BASE + VX_W1_TX_PIO_WR_1);
+ outw(0x0, BASE + VX_W1_TX_PIO_WR_1); /* Second dword meaningless */
+
+ /* write packet */
+ outsw(BASE + VX_W1_TX_PIO_WR_1, d, ETH_ALEN/2);
+ outsw(BASE + VX_W1_TX_PIO_WR_1, nic->node_addr, ETH_ALEN/2);
+ outw(t, BASE + VX_W1_TX_PIO_WR_1);
+ outsw(BASE + VX_W1_TX_PIO_WR_1, p, s / 2);
+ if (s & 1)
+ outb(*(p+s - 1), BASE + VX_W1_TX_PIO_WR_1);
+
+ while (pad--)
+ outb(0, BASE + VX_W1_TX_PIO_WR_1); /* Padding */
+
+ /* wait for Tx complete */
+ while((inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS) != 0)
+ ;
+}
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+static int t595_poll(struct nic *nic, int retrieve)
+{
+ /* common variables */
+ /* variables for 3C595 */
+ short status, cst;
+ register short rx_fifo;
+
+ cst=inw(BASE + VX_STATUS);
+
+#ifdef EDEBUG
+ if(cst & 0x1FFF)
+ printf("-%hX-",cst);
+#endif
+
+ if( (cst & S_RX_COMPLETE)==0 ) {
+ /* acknowledge everything */
+ outw(ACK_INTR | cst, BASE + VX_COMMAND);
+ outw(C_INTR_LATCH, BASE + VX_COMMAND);
+
+ return 0;
+ }
+
+ status = inw(BASE + VX_W1_RX_STATUS);
+#ifdef EDEBUG
+ printf("*%hX*",status);
+#endif
+
+ if (status & ERR_RX) {
+ outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+ return 0;
+ }
+
+ rx_fifo = status & RX_BYTES_MASK;
+ if (rx_fifo==0)
+ return 0;
+
+ if ( ! retrieve ) return 1;
+
+ /* read packet */
+#ifdef EDEBUG
+ printf("[l=%d",rx_fifo);
+#endif
+ insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet, rx_fifo / 2);
+ if(rx_fifo & 1)
+ nic->packet[rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
+ nic->packetlen=rx_fifo;
+
+ while(1) {
+ status = inw(BASE + VX_W1_RX_STATUS);
+#ifdef EDEBUG
+ printf("*%hX*",status);
+#endif
+ rx_fifo = status & RX_BYTES_MASK;
+
+ if(rx_fifo>0) {
+ insw(BASE + VX_W1_RX_PIO_RD_1, nic->packet+nic->packetlen, rx_fifo / 2);
+ if(rx_fifo & 1)
+ nic->packet[nic->packetlen+rx_fifo-1]=inb(BASE + VX_W1_RX_PIO_RD_1);
+ nic->packetlen+=rx_fifo;
+#ifdef EDEBUG
+ printf("+%d",rx_fifo);
+#endif
+ }
+ if(( status & RX_INCOMPLETE )==0) {
+#ifdef EDEBUG
+ printf("=%d",nic->packetlen);
+#endif
+ break;
+ }
+ udelay(1000);
+ }
+
+ /* acknowledge reception of packet */
+ outw(RX_DISCARD_TOP_PACK, BASE + VX_COMMAND);
+ while (inw(BASE + VX_STATUS) & S_COMMAND_IN_PROGRESS);
+#ifdef EDEBUG
+{
+ unsigned short type = 0; /* used by EDEBUG */
+ type = (nic->packet[12]<<8) | nic->packet[13];
+ if(nic->packet[0]+nic->packet[1]+nic->packet[2]+nic->packet[3]+nic->packet[4]+
+ nic->packet[5] == 0xFF*ETH_ALEN)
+ printf(",t=%hX,b]",type);
+ else
+ printf(",t=%hX]",type);
+}
+#endif
+ return 1;
+}
+
+
+/*************************************************************************
+ 3Com 595 - specific routines
+**************************************************************************/
+
+static int
+eeprom_rdy()
+{
+ int i;
+
+ for (i = 0; is_eeprom_busy(BASE) && i < MAX_EEPROMBUSY; i++)
+ udelay(1000);
+ if (i >= MAX_EEPROMBUSY) {
+ /* printf("3c595: eeprom failed to come ready.\n"); */
+ printf("3c595: eeprom is busy.\n"); /* memory in EPROM is tight */
+ return (0);
+ }
+ return (1);
+}
+
+/*
+ * get_e: gets a 16 bits word from the EEPROM. we must have set the window
+ * before
+ */
+static int
+get_e(offset)
+int offset;
+{
+ if (!eeprom_rdy())
+ return (0xffff);
+ outw(EEPROM_CMD_RD | offset, BASE + VX_W0_EEPROM_COMMAND);
+ if (!eeprom_rdy())
+ return (0xffff);
+ return (inw(BASE + VX_W0_EEPROM_DATA));
+}
+
+static void
+vxgetlink(void)
+{
+ int n, k;
+
+ GO_WINDOW(3);
+ vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
+ for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
+ if (vx_connectors & conn_tab[k].bit) {
+ if (n > 0) {
+ printf("/");
+ }
+ printf("%s", conn_tab[k].name );
+ n++;
+ }
+ }
+ if (vx_connectors == 0) {
+ printf("no connectors!");
+ return;
+ }
+ GO_WINDOW(3);
+ vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG)
+ & INTERNAL_CONNECTOR_MASK)
+ >> INTERNAL_CONNECTOR_BITS;
+ if (vx_connector & 0x10) {
+ vx_connector &= 0x0f;
+ printf("[*%s*]", conn_tab[vx_connector].name);
+ printf(": disable 'auto select' with DOS util!");
+ } else {
+ printf("[*%s*]", conn_tab[vx_connector].name);
+ }
+}
+
+static void
+vxsetlink(void)
+{
+ int i, j;
+ char *reason, *warning;
+ static char prev_conn = -1;
+
+ if (prev_conn == -1) {
+ prev_conn = vx_connector;
+ }
+
+ i = vx_connector; /* default in EEPROM */
+ reason = "default";
+ warning = 0;
+
+ if ((vx_connectors & conn_tab[vx_connector].bit) == 0) {
+ warning = "strange connector type in EEPROM.";
+ reason = "forced";
+ i = CONNECTOR_UTP;
+ }
+
+ if (warning != 0) {
+ printf("warning: %s\n", warning);
+ }
+ printf("selected %s. (%s)\n", conn_tab[i].name, reason);
+
+ /* Set the selected connector. */
+ GO_WINDOW(3);
+ j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
+ outl(j | (i <<INTERNAL_CONNECTOR_BITS), BASE + VX_W3_INTERNAL_CFG);
+
+ /* First, disable all. */
+ outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+ udelay(8000);
+ GO_WINDOW(4);
+ outw(0, BASE + VX_W4_MEDIA_TYPE);
+
+ /* Second, enable the selected one. */
+ switch(i) {
+ case CONNECTOR_UTP:
+ GO_WINDOW(4);
+ outw(ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
+ break;
+ case CONNECTOR_BNC:
+ outw(START_TRANSCEIVER,BASE + VX_COMMAND);
+ udelay(8000);
+ break;
+ case CONNECTOR_TX:
+ case CONNECTOR_FX:
+ GO_WINDOW(4);
+ outw(LINKBEAT_ENABLE, BASE + VX_W4_MEDIA_TYPE);
+ break;
+ default: /* AUI and MII fall here */
+ break;
+ }
+ GO_WINDOW(1);
+}
+
+static void t595_disable ( struct nic *nic ) {
+
+ t595_reset(nic);
+
+ outw(STOP_TRANSCEIVER, BASE + VX_COMMAND);
+ udelay(8000);
+ GO_WINDOW(4);
+ outw(0, BASE + VX_W4_MEDIA_TYPE);
+ GO_WINDOW(1);
+}
+
+static void t595_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+ switch ( action ) {
+ case DISABLE :
+ break;
+ case ENABLE :
+ break;
+ case FORCE :
+ break;
+ }
+}
+
+/**************************************************************************
+ETH_PROBE - Look for an adapter
+***************************************************************************/
+static int t595_probe ( struct nic *nic, struct pci_device *pci ) {
+
+ int i;
+ unsigned short *p;
+
+ if (pci->ioaddr == 0)
+ return 0;
+ eth_nic_base = pci->ioaddr;
+
+ nic->irqno = 0;
+ nic->ioaddr = pci->ioaddr;
+
+ GO_WINDOW(0);
+ outw(GLOBAL_RESET, BASE + VX_COMMAND);
+ VX_BUSY_WAIT;
+
+ vxgetlink();
+
+/*
+ printf("\nEEPROM:");
+ for (i = 0; i < (EEPROMSIZE/2); i++) {
+ printf("%hX:", get_e(i));
+ }
+ printf("\n");
+*/
+ /*
+ * Read the station address from the eeprom
+ */
+ p = (unsigned short *) nic->node_addr;
+ for (i = 0; i < 3; i++) {
+ GO_WINDOW(0);
+ p[i] = htons(get_e(EEPROM_OEM_ADDR_0 + i));
+ GO_WINDOW(2);
+ outw(ntohs(p[i]), BASE + VX_W2_ADDR_0 + (i * 2));
+ }
+
+ DBG ( "Ethernet address: %s\n", eth_ntoa (nic->node_addr) );
+
+ t595_reset(nic);
+ nic->nic_op = &t595_operations;
+ return 1;
+
+}
+
+static struct nic_operations t595_operations = {
+ .connect = dummy_connect,
+ .poll = t595_poll,
+ .transmit = t595_transmit,
+ .irq = t595_irq,
+
+};
+
+static struct pci_device_id t595_nics[] = {
+PCI_ROM(0x10b7, 0x5900, "3c590", "3Com590", 0), /* Vortex 10Mbps */
+PCI_ROM(0x10b7, 0x5950, "3c595", "3Com595", 0), /* Vortex 100baseTx */
+PCI_ROM(0x10b7, 0x5951, "3c595-1", "3Com595", 0), /* Vortex 100baseT4 */
+PCI_ROM(0x10b7, 0x5952, "3c595-2", "3Com595", 0), /* Vortex 100base-MII */
+PCI_ROM(0x10b7, 0x9000, "3c900-tpo", "3Com900-TPO", 0), /* 10 Base TPO */
+PCI_ROM(0x10b7, 0x9001, "3c900-t4", "3Com900-Combo", 0), /* 10/100 T4 */
+PCI_ROM(0x10b7, 0x9004, "3c900b-tpo", "3Com900B-TPO", 0), /* 10 Base TPO */
+PCI_ROM(0x10b7, 0x9005, "3c900b-combo", "3Com900B-Combo", 0), /* 10 Base Combo */
+PCI_ROM(0x10b7, 0x9006, "3c900b-tpb2", "3Com900B-2/T", 0), /* 10 Base TP and Base2 */
+PCI_ROM(0x10b7, 0x900a, "3c900b-fl", "3Com900B-FL", 0), /* 10 Base F */
+PCI_ROM(0x10b7, 0x9800, "3c980-cyclone-1", "3Com980-Cyclone", 0), /* Cyclone */
+PCI_ROM(0x10b7, 0x9805, "3c9805-1", "3Com9805", 0), /* Dual Port Server Cyclone */
+PCI_ROM(0x10b7, 0x7646, "3csoho100-tx-1", "3CSOHO100-TX", 0), /* Hurricane */
+PCI_ROM(0x10b7, 0x4500, "3c450-1", "3Com450 HomePNA Tornado", 0),
+};
+
+PCI_DRIVER ( t595_driver, t595_nics, PCI_NO_CLASS );
+
+DRIVER ( "3C595", nic_driver, pci_driver, t595_driver,
+ t595_probe, t595_disable );
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * c-indent-level: 8
+ * tab-width: 8
+ * End:
+ */
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-02 00:09:22 +0000