path: root/drawinglayer/source/processor3d/zbufferprocessor3d.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <processor3d/zbufferprocessor3d.hxx>
#include <basegfx/raster/bzpixelraster.hxx>
#include <basegfx/raster/rasterconvert3d.hxx>
#include <drawinglayer/attribute/materialattribute3d.hxx>
#include <texture/texture.hxx>
#include <basegfx/polygon/b3dpolygon.hxx>
#include <basegfx/polygon/b3dpolypolygon.hxx>
#include <basegfx/polygon/b3dpolygontools.hxx>
#include <basegfx/polygon/b3dpolypolygontools.hxx>
#include <drawinglayer/attribute/sdrlightingattribute3d.hxx>
#include <o3tl/safeint.hxx>
#include <svtools/optionsdrawinglayer.hxx>

using namespace com::sun::star;

class ZBufferRasterConverter3D : public basegfx::RasterConverter3D
{
private:
    const drawinglayer::processor3d::DefaultProcessor3D&    mrProcessor;
    basegfx::BZPixelRaster&                                 mrBuffer;

    // interpolators for a single line span
    basegfx::ip_single                                      maIntZ;
    basegfx::ip_triple                                      maIntColor;
    basegfx::ip_triple                                      maIntNormal;
    basegfx::ip_double                                      maIntTexture;
    basegfx::ip_triple                                      maIntInvTexture;

    // current material to use for rasterconversion
    const drawinglayer::attribute::MaterialAttribute3D*     mpCurrentMaterial;

    // some boolean flags for line span interpolator usages
    bool                                                    mbModifyColor : 1;
    bool                                                    mbUseTex : 1;
    bool                                                    mbHasTexCoor : 1;
    bool                                                    mbHasInvTexCoor : 1;
    bool                                                    mbUseNrm : 1;
    bool                                                    mbUseCol : 1;

    void getTextureCoor(basegfx::B2DPoint& rTarget) const
    {
        if(mbHasTexCoor)
        {
            rTarget.setX(maIntTexture.getX().getVal());
            rTarget.setY(maIntTexture.getY().getVal());
        }
        else if(mbHasInvTexCoor)
        {
            const double fZFactor(maIntInvTexture.getZ().getVal());
            const double fInvZFactor(basegfx::fTools::equalZero(fZFactor) ? 1.0 : 1.0 / fZFactor);
            rTarget.setX(maIntInvTexture.getX().getVal() * fInvZFactor);
            rTarget.setY(maIntInvTexture.getY().getVal() * fInvZFactor);
        }
    }

    void incrementLineSpanInterpolators(double fStep)
    {
        maIntZ.increment(fStep);

        if(mbUseTex)
        {
            if(mbHasTexCoor)
            {
                maIntTexture.increment(fStep);
            }
            else if(mbHasInvTexCoor)
            {
                maIntInvTexture.increment(fStep);
            }
        }

        if(mbUseNrm)
        {
            maIntNormal.increment(fStep);
        }

        if(mbUseCol)
        {
            maIntColor.increment(fStep);
        }
    }

    double decideColorAndOpacity(basegfx::BColor& rColor) const
    {
        // init values with full opacity and material color
        OSL_ENSURE(nullptr != mpCurrentMaterial, "CurrentMaterial not set (!)");
        double fOpacity(1.0);
        rColor = mpCurrentMaterial->getColor();

        if(mbUseTex)
        {
            basegfx::B2DPoint aTexCoor(0.0, 0.0);
            getTextureCoor(aTexCoor);

            if(mrProcessor.getGeoTexSvx())
            {
                // calc color in spot. This may also set to invisible already when
                // e.g. bitmap textures have transparent parts
                mrProcessor.getGeoTexSvx()->modifyBColor(aTexCoor, rColor, fOpacity);
            }

            if(basegfx::fTools::more(fOpacity, 0.0) && mrProcessor.getTransparenceGeoTexSvx())
            {
                // calc opacity. Object has a 2nd texture, a transparence texture
                mrProcessor.getTransparenceGeoTexSvx()->modifyOpacity(aTexCoor, fOpacity);
            }
        }

        if(basegfx::fTools::more(fOpacity, 0.0))
        {
            if(mrProcessor.getGeoTexSvx())
            {
                if(mbUseNrm)
                {
                    // blend texture with phong
                    rColor = mrProcessor.getSdrLightingAttribute().solveColorModel(
                        basegfx::B3DVector(maIntNormal.getX().getVal(), maIntNormal.getY().getVal(), maIntNormal.getZ().getVal()),
                        rColor,
                        mpCurrentMaterial->getSpecular(),
                        mpCurrentMaterial->getEmission(),
                        mpCurrentMaterial->getSpecularIntensity());
                }
                else if(mbUseCol)
                {
                    // blend texture with gouraud
                    basegfx::BColor aBlendColor(maIntColor.getX().getVal(), maIntColor.getY().getVal(), maIntColor.getZ().getVal());
                    rColor *= aBlendColor;
                }
                else if(mrProcessor.getModulate())
                {
                    // blend texture with single material color
                    rColor *= mpCurrentMaterial->getColor();
                }
            }
            else
            {
                if(mbUseNrm)
                {
                    // modify color with phong
                    rColor = mrProcessor.getSdrLightingAttribute().solveColorModel(
                        basegfx::B3DVector(maIntNormal.getX().getVal(), maIntNormal.getY().getVal(), maIntNormal.getZ().getVal()),
                        rColor,
                        mpCurrentMaterial->getSpecular(),
                        mpCurrentMaterial->getEmission(),
                        mpCurrentMaterial->getSpecularIntensity());
                }
                else if(mbUseCol)
                {
                    // modify color with gouraud
                    rColor.setRed(maIntColor.getX().getVal());
                    rColor.setGreen(maIntColor.getY().getVal());
                    rColor.setBlue(maIntColor.getZ().getVal());
                }
            }

            if(mbModifyColor)
            {
                rColor = mrProcessor.getBColorModifierStack().getModifiedColor(rColor);
            }
        }

        return fOpacity;
    }

    void setupLineSpanInterpolators(const basegfx::RasterConversionLineEntry3D& rA, const basegfx::RasterConversionLineEntry3D& rB)
    {
        // get inverse XDelta
        const double xInvDelta(1.0 / (rB.getX().getVal() - rA.getX().getVal()));

        // prepare Z-interpolator
        const double fZA(rA.getZ().getVal());
        const double fZB(rB.getZ().getVal());
        maIntZ = basegfx::ip_single(fZA, (fZB - fZA) * xInvDelta);

        // get bools and init other interpolators on demand accordingly
        mbModifyColor = mrProcessor.getBColorModifierStack().count();
        mbHasTexCoor = SCANLINE_EMPTY_INDEX != rA.getTextureIndex() && SCANLINE_EMPTY_INDEX != rB.getTextureIndex();
        mbHasInvTexCoor = SCANLINE_EMPTY_INDEX != rA.getInverseTextureIndex() && SCANLINE_EMPTY_INDEX != rB.getInverseTextureIndex();
        const bool bTextureActive(mrProcessor.getGeoTexSvx() || mrProcessor.getTransparenceGeoTexSvx());
        mbUseTex = bTextureActive && (mbHasTexCoor || mbHasInvTexCoor || mrProcessor.getSimpleTextureActive());
        const bool bUseColorTex(mbUseTex && mrProcessor.getGeoTexSvx());
        const bool bNeedNrmOrCol(!bUseColorTex || mrProcessor.getModulate());
        mbUseNrm = bNeedNrmOrCol && SCANLINE_EMPTY_INDEX != rA.getNormalIndex() && SCANLINE_EMPTY_INDEX != rB.getNormalIndex();
        mbUseCol = !mbUseNrm && bNeedNrmOrCol && SCANLINE_EMPTY_INDEX != rA.getColorIndex() && SCANLINE_EMPTY_INDEX != rB.getColorIndex();

        if(mbUseTex)
        {
            if(mbHasTexCoor)
            {
                const basegfx::ip_double& rTA(getTextureInterpolators()[rA.getTextureIndex()]);
                const basegfx::ip_double& rTB(getTextureInterpolators()[rB.getTextureIndex()]);
                maIntTexture = basegfx::ip_double(
                    rTA.getX().getVal(), (rTB.getX().getVal() - rTA.getX().getVal()) * xInvDelta,
                    rTA.getY().getVal(), (rTB.getY().getVal() - rTA.getY().getVal()) * xInvDelta);
            }
            else if(mbHasInvTexCoor)
            {
                const basegfx::ip_triple& rITA(getInverseTextureInterpolators()[rA.getInverseTextureIndex()]);
                const basegfx::ip_triple& rITB(getInverseTextureInterpolators()[rB.getInverseTextureIndex()]);
                maIntInvTexture = basegfx::ip_triple(
                    rITA.getX().getVal(), (rITB.getX().getVal() - rITA.getX().getVal()) * xInvDelta,
                    rITA.getY().getVal(), (rITB.getY().getVal() - rITA.getY().getVal()) * xInvDelta,
                    rITA.getZ().getVal(), (rITB.getZ().getVal() - rITA.getZ().getVal()) * xInvDelta);
            }
        }

        if(mbUseNrm)
        {
            const basegfx::ip_triple& rNA(getNormalInterpolators()[rA.getNormalIndex()]);
            const basegfx::ip_triple& rNB(getNormalInterpolators()[rB.getNormalIndex()]);
            maIntNormal = basegfx::ip_triple(
                rNA.getX().getVal(), (rNB.getX().getVal() - rNA.getX().getVal()) * xInvDelta,
                rNA.getY().getVal(), (rNB.getY().getVal() - rNA.getY().getVal()) * xInvDelta,
                rNA.getZ().getVal(), (rNB.getZ().getVal() - rNA.getZ().getVal()) * xInvDelta);
        }

        if(mbUseCol)
        {
            const basegfx::ip_triple& rCA(getColorInterpolators()[rA.getColorIndex()]);
            const basegfx::ip_triple& rCB(getColorInterpolators()[rB.getColorIndex()]);
            maIntColor = basegfx::ip_triple(
                rCA.getX().getVal(), (rCB.getX().getVal() - rCA.getX().getVal()) * xInvDelta,
                rCA.getY().getVal(), (rCB.getY().getVal() - rCA.getY().getVal()) * xInvDelta,
                rCA.getZ().getVal(), (rCB.getZ().getVal() - rCA.getZ().getVal()) * xInvDelta);
        }
    }

    virtual void processLineSpan(const basegfx::RasterConversionLineEntry3D& rA, const basegfx::RasterConversionLineEntry3D& rB, sal_Int32 nLine, sal_uInt32 nSpanCount) override;

public:
    ZBufferRasterConverter3D(basegfx::BZPixelRaster& rBuffer, const drawinglayer::processor3d::ZBufferProcessor3D& rProcessor)
    :   mrProcessor(rProcessor),
        mrBuffer(rBuffer),
        mpCurrentMaterial(nullptr),
        mbModifyColor(false),
        mbUseTex(false),
        mbHasTexCoor(false),
        mbHasInvTexCoor(false),
        mbUseNrm(false),
        mbUseCol(false)
    {}

    void setCurrentMaterial(const drawinglayer::attribute::MaterialAttribute3D& rMaterial)
    {
        mpCurrentMaterial = &rMaterial;
    }
};

void ZBufferRasterConverter3D::processLineSpan(const basegfx::RasterConversionLineEntry3D& rA, const basegfx::RasterConversionLineEntry3D& rB, sal_Int32 nLine, sal_uInt32 nSpanCount)
{
    if(nSpanCount & 0x0001)
        return;

    if(nLine < 0 || o3tl::make_unsigned(nLine) >= mrBuffer.getHeight())
        return;

    sal_uInt32 nXA(std::min(mrBuffer.getWidth(), static_cast<sal_uInt32>(std::max(sal_Int32(0), basegfx::fround(rA.getX().getVal())))));
    const sal_uInt32 nXB(std::min(mrBuffer.getWidth(), static_cast<sal_uInt32>(std::max(sal_Int32(0), basegfx::fround(rB.getX().getVal())))));

    if(nXA >= nXB)
        return;

    // prepare the span interpolators
    setupLineSpanInterpolators(rA, rB);

    // bring span interpolators to start condition by incrementing with the possible difference of
    // clamped and non-clamped XStart. Interpolators are setup relying on double precision
    // X-values, so that difference is the correct value to compensate for possible clampings
    incrementLineSpanInterpolators(static_cast<double>(nXA) - rA.getX().getVal());

    // prepare scanline index
    sal_uInt32 nScanlineIndex(mrBuffer.getIndexFromXY(nXA, static_cast<sal_uInt32>(nLine)));
    basegfx::BColor aNewColor;

    while(nXA < nXB)
    {
        // early-test Z values if we need to do anything at all
        const double fNewZ(std::clamp(maIntZ.getVal(), 0.0, 65535.0));
        const sal_uInt16 nNewZ(static_cast< sal_uInt16 >(fNewZ));
        sal_uInt16& rOldZ(mrBuffer.getZ(nScanlineIndex));

        if(nNewZ > rOldZ)
        {
            // detect color and opacity for this pixel
            const sal_uInt16 nOpacity(std::max(sal_Int16(0), static_cast< sal_Int16 >(decideColorAndOpacity(aNewColor) * 255.0)));

            if(nOpacity > 0)
            {
                // avoid color overrun
                aNewColor.clamp();

                if(nOpacity >= 0x00ff)
                {
                    // full opacity (not transparent), set z and color
                    rOldZ = nNewZ;
                    mrBuffer.getBPixel(nScanlineIndex) = basegfx::BPixel(aNewColor, 0xff);
                }
                else
                {
                    basegfx::BPixel& rDest = mrBuffer.getBPixel(nScanlineIndex);

                    if(rDest.getAlpha())
                    {
                        // mix new color by using
                        // color' = color * (1 - opacity) + newcolor * opacity
                        const sal_uInt16 nTransparence(255 - nOpacity);
                        rDest.setRed(static_cast<sal_uInt8>(((rDest.getRed() * nTransparence) + (static_cast<sal_uInt16>(255.0 * aNewColor.getRed()) * nOpacity)) >> 8));
                        rDest.setGreen(static_cast<sal_uInt8>(((rDest.getGreen() * nTransparence) + (static_cast<sal_uInt16>(255.0 * aNewColor.getGreen()) * nOpacity)) >> 8));
                        rDest.setBlue(static_cast<sal_uInt8>(((rDest.getBlue() * nTransparence) + (static_cast<sal_uInt16>(255.0 * aNewColor.getBlue()) * nOpacity)) >> 8));

                        if(255 != rDest.getAlpha())
                        {
                            // both are transparent, mix new opacity by using
                            // opacity = newopacity * (1 - oldopacity) + oldopacity
                            rDest.setAlpha(static_cast<sal_uInt8>((nOpacity * (255 - rDest.getAlpha())) >> 8) + rDest.getAlpha());
                        }
                    }
                    else
                    {
                        // dest is unused, set color
                        rDest = basegfx::BPixel(aNewColor, static_cast<sal_uInt8>(nOpacity));
                    }
                }
            }
        }

        // increments
        nScanlineIndex++;
        nXA++;
        incrementLineSpanInterpolators(1.0);
    }
}

// helper class to buffer output for transparent rasterprimitives (filled areas
// and lines) until the end of processing. To ensure correct transparent
// visualisation, ZBuffers require to not set Z and to mix with the transparent
// color. If transparent rasterprimitives overlap, it gets necessary to
// paint transparent rasterprimitives from back to front to ensure that the
// mixing happens from back to front. For that purpose, transparent
// rasterprimitives are held in this class during the processing run, remember
// all data and will be rendered

class RasterPrimitive3D
{
private:
    std::shared_ptr< drawinglayer::texture::GeoTexSvx >     mpGeoTexSvx;
    std::shared_ptr< drawinglayer::texture::GeoTexSvx >     mpTransparenceGeoTexSvx;
    drawinglayer::attribute::MaterialAttribute3D              maMaterial;
    basegfx::B3DPolyPolygon                                   maPolyPolygon;
    double                                                    mfCenterZ;

    bool                                                      mbModulate : 1;
    bool                                                      mbFilter : 1;
    bool                                                      mbSimpleTextureActive : 1;
    bool                                                      mbIsLine : 1;

public:
    RasterPrimitive3D(
        const std::shared_ptr< drawinglayer::texture::GeoTexSvx >& pGeoTexSvx,
        const std::shared_ptr< drawinglayer::texture::GeoTexSvx >& pTransparenceGeoTexSvx,
        const drawinglayer::attribute::MaterialAttribute3D& rMaterial,
        const basegfx::B3DPolyPolygon& rPolyPolygon,
        bool bModulate,
        bool bFilter,
        bool bSimpleTextureActive,
        bool bIsLine)
    :   mpGeoTexSvx(pGeoTexSvx),
        mpTransparenceGeoTexSvx(pTransparenceGeoTexSvx),
        maMaterial(rMaterial),
        maPolyPolygon(rPolyPolygon),
        mfCenterZ(basegfx::utils::getRange(rPolyPolygon).getCenter().getZ()),
        mbModulate(bModulate),
        mbFilter(bFilter),
        mbSimpleTextureActive(bSimpleTextureActive),
        mbIsLine(bIsLine)
    {
    }

    bool operator<(const RasterPrimitive3D& rComp) const
    {
        return mfCenterZ < rComp.mfCenterZ;
    }

    const std::shared_ptr< drawinglayer::texture::GeoTexSvx >& getGeoTexSvx() const { return mpGeoTexSvx; }
    const std::shared_ptr< drawinglayer::texture::GeoTexSvx >& getTransparenceGeoTexSvx() const { return mpTransparenceGeoTexSvx; }
    const drawinglayer::attribute::MaterialAttribute3D& getMaterial() const { return maMaterial; }
    const basegfx::B3DPolyPolygon& getPolyPolygon() const { return maPolyPolygon; }
    bool getModulate() const { return mbModulate; }
    bool getFilter() const { return mbFilter; }
    bool getSimpleTextureActive() const { return mbSimpleTextureActive; }
    bool getIsLine() const { return mbIsLine; }
};

namespace drawinglayer::processor3d
{
        void ZBufferProcessor3D::rasterconvertB3DPolygon(const attribute::MaterialAttribute3D& rMaterial, const basegfx::B3DPolygon& rHairline) const
        {
            if(getTransparenceCounter())
            {
                // transparent output; record for later sorting and painting from
                // back to front

                maRasterPrimitive3Ds.push_back(RasterPrimitive3D(
                    getGeoTexSvx(),
                    getTransparenceGeoTexSvx(),
                    rMaterial,
                    basegfx::B3DPolyPolygon(rHairline),
                    getModulate(),
                    getFilter(),
                    getSimpleTextureActive(),
                    true));
            }
            else
            {
                // do rasterconversion
                mpZBufferRasterConverter3D->setCurrentMaterial(rMaterial);

                if(mnAntiAlialize > 1)
                {
                    const bool bForceLineSnap(SvtOptionsDrawinglayer::IsAntiAliasing() && SvtOptionsDrawinglayer::IsSnapHorVerLinesToDiscrete());

                    if(bForceLineSnap)
                    {
                        basegfx::B3DHomMatrix aTransform;
                        basegfx::B3DPolygon aSnappedHairline(rHairline);
                        const double fScaleDown(1.0 / mnAntiAlialize);
                        const double fScaleUp(mnAntiAlialize);

                        // take oversampling out
                        aTransform.scale(fScaleDown, fScaleDown, 1.0);
                        aSnappedHairline.transform(aTransform);

                        // snap to integer
                        aSnappedHairline = basegfx::utils::snapPointsOfHorizontalOrVerticalEdges(aSnappedHairline);

                        // add oversampling again
                        aTransform.identity();
                        aTransform.scale(fScaleUp, fScaleUp, 1.0);

                        aSnappedHairline.transform(aTransform);

                        mpZBufferRasterConverter3D->rasterconvertB3DPolygon(aSnappedHairline, mnStartLine, mnStopLine, mnAntiAlialize);
                    }
                    else
                    {
                        mpZBufferRasterConverter3D->rasterconvertB3DPolygon(rHairline, mnStartLine, mnStopLine, mnAntiAlialize);
                    }
                }
                else
                {
                    mpZBufferRasterConverter3D->rasterconvertB3DPolygon(rHairline, mnStartLine, mnStopLine, 1);
                }
            }
        }

        void ZBufferProcessor3D::rasterconvertB3DPolyPolygon(const attribute::MaterialAttribute3D& rMaterial, const basegfx::B3DPolyPolygon& rFill) const
        {
            if(getTransparenceCounter())
            {
                // transparent output; record for later sorting and painting from
                // back to front
                maRasterPrimitive3Ds.push_back(RasterPrimitive3D(
                    getGeoTexSvx(),
                    getTransparenceGeoTexSvx(),
                    rMaterial,
                    rFill,
                    getModulate(),
                    getFilter(),
                    getSimpleTextureActive(),
                    false));
            }
            else
            {
                mpZBufferRasterConverter3D->setCurrentMaterial(rMaterial);
                mpZBufferRasterConverter3D->rasterconvertB3DPolyPolygon(rFill, &maInvEyeToView, mnStartLine, mnStopLine);
            }
        }

        ZBufferProcessor3D::ZBufferProcessor3D(
            const geometry::ViewInformation3D& rViewInformation3D,
            const attribute::SdrSceneAttribute& rSdrSceneAttribute,
            const attribute::SdrLightingAttribute& rSdrLightingAttribute,
            const basegfx::B2DRange& rVisiblePart,
            sal_uInt16 nAntiAlialize,
            double fFullViewSizeX,
            double fFullViewSizeY,
            basegfx::BZPixelRaster& rBZPixelRaster,
            sal_uInt32 nStartLine,
            sal_uInt32 nStopLine)
        :   DefaultProcessor3D(rViewInformation3D, rSdrSceneAttribute, rSdrLightingAttribute),
            mnAntiAlialize(nAntiAlialize),
            mnStartLine(nStartLine),
            mnStopLine(nStopLine)
        {
            // create DeviceToView for Z-Buffer renderer since Z is handled
            // different from standard 3D transformations (Z is mirrored). Also
            // the transformation includes the step from unit device coordinates
            // to discrete units ([-1.0 .. 1.0] -> [minDiscrete .. maxDiscrete]
            basegfx::B3DHomMatrix aDeviceToView;

            {
                // step one:
                //
                // bring from [-1.0 .. 1.0] in X,Y and Z to [0.0 .. 1.0]. Also
                // necessary to
                // - flip Y due to screen orientation
                // - flip Z due to Z-Buffer orientation from back to front

                aDeviceToView.scale(0.5, -0.5, -0.5);
                aDeviceToView.translate(0.5, 0.5, 0.5);
            }

            {
                // step two:
                //
                // bring from [0.0 .. 1.0] in X,Y and Z to view coordinates
                //
                // #i102611#
                // also: scale Z to [1.5 .. 65534.5]. Normally, a range of [0.0 .. 65535.0]
                // could be used, but a 'unused' value is needed, so '0' is used what reduces
                // the range to [1.0 .. 65535.0]. It has also shown that small numerical errors
                // (smaller as basegfx::fTools::mfSmallValue, which is 0.000000001) happen.
                // Instead of checking those by basegfx::fTools methods which would cost
                // runtime, just add another 0.5 tolerance to the start and end of the Z-Buffer
                // range, thus resulting in [1.5 .. 65534.5]
                const double fMaxZDepth(65533.0);
                aDeviceToView.translate(-rVisiblePart.getMinX(), -rVisiblePart.getMinY(), 0.0);

                if(mnAntiAlialize)
                    aDeviceToView.scale(fFullViewSizeX * mnAntiAlialize, fFullViewSizeY * mnAntiAlialize, fMaxZDepth);
                else
                    aDeviceToView.scale(fFullViewSizeX, fFullViewSizeY, fMaxZDepth);

                aDeviceToView.translate(0.0, 0.0, 1.5);
            }

            // update local ViewInformation3D with own DeviceToView
            const geometry::ViewInformation3D aNewViewInformation3D(
                getViewInformation3D().getObjectTransformation(),
                getViewInformation3D().getOrientation(),
                getViewInformation3D().getProjection(),
                aDeviceToView,
                getViewInformation3D().getViewTime(),
                getViewInformation3D().getExtendedInformationSequence());
            updateViewInformation(aNewViewInformation3D);

            // prepare inverse EyeToView transformation. This can be done in constructor
            // since changes in object transformations when processing TransformPrimitive3Ds
            // do not influence this prepared partial transformation
            maInvEyeToView = getViewInformation3D().getDeviceToView() * getViewInformation3D().getProjection();
            maInvEyeToView.invert();

            // prepare maRasterRange
            maRasterRange.reset();
            maRasterRange.expand(basegfx::B2DPoint(0.0, nStartLine));
            maRasterRange.expand(basegfx::B2DPoint(rBZPixelRaster.getWidth(), nStopLine));

            // create the raster converter
            mpZBufferRasterConverter3D.reset( new ZBufferRasterConverter3D(rBZPixelRaster, *this) );
        }

        ZBufferProcessor3D::~ZBufferProcessor3D()
        {
            mpZBufferRasterConverter3D.reset();

            if(!maRasterPrimitive3Ds.empty())
            {
                OSL_FAIL("ZBufferProcessor3D: destructed, but there are unrendered transparent geometries. Use ZBufferProcessor3D::finish() to render these (!)");
            }
        }

        void ZBufferProcessor3D::finish()
        {
            if(maRasterPrimitive3Ds.empty())
                return;

            // there are transparent rasterprimitives
            const sal_uInt32 nSize(maRasterPrimitive3Ds.size());

            if(nSize > 1)
            {
                // sort them from back to front
                std::sort(maRasterPrimitive3Ds.begin(), maRasterPrimitive3Ds.end());
            }

            for(sal_uInt32 a(0); a < nSize; a++)
            {
                // paint each one by setting the remembered data and calling
                // the render method
                const RasterPrimitive3D& rCandidate = maRasterPrimitive3Ds[a];

                mpGeoTexSvx = rCandidate.getGeoTexSvx();
                mpTransparenceGeoTexSvx = rCandidate.getTransparenceGeoTexSvx();
                mbModulate = rCandidate.getModulate();
                mbFilter = rCandidate.getFilter();
                mbSimpleTextureActive = rCandidate.getSimpleTextureActive();

                if(rCandidate.getIsLine())
                {
                    rasterconvertB3DPolygon(
                        rCandidate.getMaterial(),
                        rCandidate.getPolyPolygon().getB3DPolygon(0));
                }
                else
                {
                    rasterconvertB3DPolyPolygon(
                        rCandidate.getMaterial(),
                        rCandidate.getPolyPolygon());
                }
            }

            // delete them to signal the destructor that all is done and
            // to allow asserting there
            maRasterPrimitive3Ds.clear();
        }

} // end of namespace

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */