Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

117 files changed, 86455 insertions, 0 deletions

diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
new file mode 100644
index 000000000..f3f3f8cd1
--- /dev/null
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG			(1 << 2)
+#define STATUS2_BAT			(1 << 3)
+#define STATUS2_VBUS			(1 << 4)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_TINT			(1 << 3)
+#define MEAS1_GP1			(1 << 5)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT			(1 << 0)
+#define MEAS3_BAT_DET			(1 << 1)
+#define MEAS3_CC			(1 << 2)
+
+/* bit definitions of Measurement Off Time Register */
+#define MEAS_OFF_SLEEP_EN		(1 << 1)
+
+/* bit definitions of GPADC Bias Current 2 Register */
+#define GPBIAS2_GPADC1_SET		(2 << 4)
+/* GPADC1 Bias Current value in uA unit */
+#define GPBIAS2_GPADC1_UA		((GPBIAS2_GPADC1_SET >> 4) * 5 + 1)
+
+/* bit definitions of GPADC Misc 1 Register */
+#define GPMISC1_GPADC_EN		(1 << 0)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_DET_GPADC1		1
+
+/* bit definitions of Coulomb Counter Reading Register */
+#define CCNT_AVG_SEL			(4 << 3)
+
+/* bit definitions of RTC miscellaneous Register1 */
+#define RTC_SOC_5LSB		(0x1F << 3)
+
+/* bit definitions of RTC Register1 */
+#define RTC_SOC_3MSB		(0x7)
+
+/* bit definitions of Power up Log register */
+#define BAT_WU_LOG			(1<<6)
+
+/* coulomb counter index */
+#define CCNT_POS1			0
+#define CCNT_POS2			1
+#define CCNT_NEG1			2
+#define CCNT_NEG2			3
+#define CCNT_SPOS			4
+#define CCNT_SNEG			5
+
+/* OCV -- Open Circuit Voltage */
+#define OCV_MODE_ACTIVE			0
+#define OCV_MODE_SLEEP			1
+
+/* Vbat range of CC for measuring Rbat */
+#define LOW_BAT_THRESHOLD		3600
+#define VBATT_RESISTOR_MIN		3800
+#define VBATT_RESISTOR_MAX		4100
+
+/* TBAT for batt, TINT for chip itself */
+#define PM860X_TEMP_TINT		(0)
+#define PM860X_TEMP_TBAT		(1)
+
+/*
+ * Battery temperature based on NTC resistor, defined
+ * corresponding resistor value  -- Ohm / C degeree.
+ */
+#define TBAT_NEG_25D		127773	/* -25 */
+#define TBAT_NEG_10D		54564	/* -10 */
+#define TBAT_0D			32330	/* 0 */
+#define TBAT_10D		19785	/* 10 */
+#define TBAT_20D		12468	/* 20 */
+#define TBAT_30D		8072	/* 30 */
+#define TBAT_40D		5356	/* 40 */
+
+struct pm860x_battery_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct device *dev;
+
+	struct power_supply *battery;
+	struct mutex lock;
+	int status;
+	int irq_cc;
+	int irq_batt;
+	int max_capacity;
+	int resistor;		/* Battery Internal Resistor */
+	int last_capacity;
+	int start_soc;
+	unsigned present:1;
+	unsigned temp_type:1;	/* TINT or TBAT */
+};
+
+struct ccnt {
+	unsigned long long pos;
+	unsigned long long neg;
+	unsigned int spos;
+	unsigned int sneg;
+
+	int total_chg;		/* mAh(3.6C) */
+	int total_dischg;	/* mAh(3.6C) */
+};
+
+/*
+ * State of Charge.
+ * The first number is mAh(=3.6C), and the second number is percent point.
+ */
+static int array_soc[][2] = {
+	{4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96},
+	{4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91},
+	{4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86},
+	{4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81},
+	{3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76},
+	{3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71},
+	{3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66},
+	{3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61},
+	{3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56},
+	{3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51},
+	{3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46},
+	{3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41},
+	{3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36},
+	{3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31},
+	{3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26},
+	{3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21},
+	{3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16},
+	{3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11},
+	{3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6},
+	{3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1},
+};
+
+static struct ccnt ccnt_data;
+
+/*
+ * register 1 bit[7:0] -- bit[11:4] of measured value of voltage
+ * register 0 bit[3:0] -- bit[3:0] of measured value of voltage
+ */
+static int measure_12bit_voltage(struct pm860x_battery_info *info,
+				 int offset, int *data)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, offset, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 25) >> 9;
+	return 0;
+}
+
+static int measure_vbatt(struct pm860x_battery_info *info, int state,
+			 int *data)
+{
+	unsigned char buf[5];
+	int ret;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data);
+		if (ret)
+			return ret;
+		/* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */
+		*data *= 3;
+		break;
+	case OCV_MODE_SLEEP:
+		/*
+		 * voltage value of VBATT in sleep mode is saved in different
+		 * registers.
+		 * bit[11:10] -- bit[7:6] of LDO9(0x18)
+		 * bit[9:8] -- bit[7:6] of LDO8(0x17)
+		 * bit[7:6] -- bit[7:6] of LDO7(0x16)
+		 * bit[5:4] -- bit[7:6] of LDO6(0x15)
+		 * bit[3:0] -- bit[7:4] of LDO5(0x14)
+		 */
+		ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf);
+		if (ret < 0)
+			return ret;
+		ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8)
+		    | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4)
+		    | (buf[0] >> 4);
+		/* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */
+		*data = ((*data & 0xff) * 27 * 25) >> 9;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Return value is signed data.
+ * Negative value means discharging, and positive value means charging.
+ */
+static int measure_current(struct pm860x_battery_info *info, int *data)
+{
+	unsigned char buf[2];
+	short s;
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	/* current(mA) = value * 0.125 */
+	*data = s >> 3;
+	return 0;
+}
+
+static int set_charger_current(struct pm860x_battery_info *info, int data,
+			       int *old)
+{
+	int ret;
+
+	if (data < 50 || data > 1600 || !old)
+		return -EINVAL;
+
+	data = ((data - 50) / 50) & 0x1f;
+	*old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2);
+	*old = (*old & 0x1f) * 50 + 50;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int read_ccnt(struct pm860x_battery_info *info, int offset,
+		     int *ccnt)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf);
+	if (ret < 0)
+		goto out;
+	*ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	return 0;
+out:
+	return ret;
+}
+
+static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	unsigned int sum;
+	int ret;
+	int data;
+
+	ret = read_ccnt(info, CCNT_POS1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_POS2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	ccnt->pos += sum;
+
+	ret = read_ccnt(info, CCNT_NEG1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_NEG2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	sum = ~sum + 1;		/* since it's negative */
+	ccnt->neg += sum;
+
+	ret = read_ccnt(info, CCNT_SPOS, &data);
+	if (ret)
+		goto out;
+	ccnt->spos += data;
+	ret = read_ccnt(info, CCNT_SNEG, &data);
+	if (ret)
+		goto out;
+
+	/*
+	 * charge(mAh)  = count * 1.6984 * 1e(-8)
+	 *              = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40)
+	 *              = count * 18236 / (2 ^ 40)
+	 */
+	ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40);
+	ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40);
+	return 0;
+out:
+	return ret;
+}
+
+static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	int data;
+
+	memset(ccnt, 0, sizeof(*ccnt));
+	/* read to clear ccnt */
+	read_ccnt(info, CCNT_POS1, &data);
+	read_ccnt(info, CCNT_POS2, &data);
+	read_ccnt(info, CCNT_NEG1, &data);
+	read_ccnt(info, CCNT_NEG2, &data);
+	read_ccnt(info, CCNT_SPOS, &data);
+	read_ccnt(info, CCNT_SNEG, &data);
+	return 0;
+}
+
+/* Calculate Open Circuit Voltage */
+static int calc_ocv(struct pm860x_battery_info *info, int *ocv)
+{
+	int ret;
+	int i;
+	int data;
+	int vbatt_avg;
+	int vbatt_sum;
+	int ibatt_avg;
+	int ibatt_sum;
+
+	if (!ocv)
+		return -EINVAL;
+
+	for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		vbatt_sum += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out;
+		ibatt_sum += data;
+	}
+	vbatt_avg = vbatt_sum / 10;
+	ibatt_avg = ibatt_sum / 10;
+
+	mutex_lock(&info->lock);
+	if (info->present)
+		*ocv = vbatt_avg - ibatt_avg * info->resistor / 1000;
+	else
+		*ocv = vbatt_avg;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv);
+	return 0;
+out:
+	return ret;
+}
+
+/* Calculate State of Charge (percent points) */
+static int calc_soc(struct pm860x_battery_info *info, int state, int *soc)
+{
+	int i;
+	int ocv;
+	int count;
+	int ret = -EINVAL;
+
+	if (!soc)
+		return -EINVAL;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = calc_ocv(info, &ocv);
+		break;
+	case OCV_MODE_SLEEP:
+		ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv);
+		break;
+	}
+	if (ret)
+		return ret;
+
+	count = ARRAY_SIZE(array_soc);
+	if (ocv < array_soc[count - 1][0]) {
+		*soc = 0;
+		return 0;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (ocv >= array_soc[i][0]) {
+			*soc = array_soc[i][1];
+			break;
+		}
+	}
+	return 0;
+}
+
+static irqreturn_t pm860x_coulomb_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+
+	calc_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_batt_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+	/* clear ccnt since battery is attached or dettached */
+	clear_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static void pm860x_init_battery(struct pm860x_battery_info *info)
+{
+	unsigned char buf[2];
+	int ret;
+	int data;
+	int bat_remove;
+	int soc = 0;
+
+	/* measure enable on GPADC1 */
+	data = MEAS1_GP1;
+	if (info->temp_type == PM860X_TEMP_TINT)
+		data |= MEAS1_TINT;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data);
+	if (ret)
+		goto out;
+
+	/* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */
+	data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data);
+	if (ret)
+		goto out;
+
+	/* measure disable CC in sleep time  */
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82);
+	if (ret)
+		goto out;
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c);
+	if (ret)
+		goto out;
+
+	/* enable GPADC */
+	ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1,
+			    GPMISC1_GPADC_EN, GPMISC1_GPADC_EN);
+	if (ret < 0)
+		goto out;
+
+	/* detect battery via GPADC1 */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			    CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1);
+	if (ret < 0)
+		goto out;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3,
+			      CCNT_AVG_SEL);
+	if (ret < 0)
+		goto out;
+
+	/* set GPADC1 bias */
+	ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4,
+			      GPBIAS2_GPADC1_SET);
+	if (ret < 0)
+		goto out;
+
+	/* check whether battery present) */
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+
+	ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+	if (ret < 0)
+		goto out;
+
+	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
+	bat_remove = data & BAT_WU_LOG;
+
+	dev_dbg(info->dev, "battery wake up? %s\n",
+		bat_remove != 0 ? "yes" : "no");
+
+	/* restore SOC from RTC domain register */
+	if (bat_remove == 0) {
+		buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2);
+		buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1);
+		data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F);
+		if (data > soc + 15)
+			info->start_soc = soc;
+		else if (data < soc - 15)
+			info->start_soc = soc;
+		else
+			info->start_soc = data;
+		dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc);
+	} else {
+		pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG,
+				BAT_WU_LOG, BAT_WU_LOG);
+		info->start_soc = soc;
+	}
+	info->last_capacity = info->start_soc;
+	dev_dbg(info->dev, "init soc : %d\n", info->last_capacity);
+out:
+	return;
+}
+
+static void set_temp_threshold(struct pm860x_battery_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data);
+	dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data);
+	dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data);
+}
+
+static int measure_temp(struct pm860x_battery_info *info, int *data)
+{
+	int ret;
+	int temp;
+	int min;
+	int max;
+
+	if (info->temp_type == PM860X_TEMP_TINT) {
+		ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data);
+		if (ret)
+			return ret;
+		*data = (*data - 884) * 1000 / 3611;
+	} else {
+		ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data);
+		if (ret)
+			return ret;
+		/* meausered Vtbat(mV) / Ibias_current(11uA)*/
+		*data = (*data * 1000) / GPBIAS2_GPADC1_UA;
+
+		if (*data > TBAT_NEG_25D) {
+			temp = -30;	/* over cold , suppose -30 roughly */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_NEG_10D) {
+			temp = -15;	/* -15 degree, code */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_0D) {
+			temp = -5;	/* -5 degree */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_10D) {
+			temp = 5;	/* in range of (0, 10) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_20D) {
+			temp = 15;	/* in range of (10, 20) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_30D) {
+			temp = 25;	/* in range of (20, 30) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_40D) {
+			temp = 35;	/* in range of (30, 40) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else {
+			min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, 0);
+			temp = 45;	/* over heat ,suppose 45 roughly */
+		}
+
+		dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data);
+		*data = temp;
+	}
+	return 0;
+}
+
+static int calc_resistor(struct pm860x_battery_info *info)
+{
+	int vbatt_sum1;
+	int vbatt_sum2;
+	int chg_current;
+	int ibatt_sum1;
+	int ibatt_sum2;
+	int data;
+	int ret;
+	int i;
+
+	ret = measure_current(info, &data);
+	/* make sure that charging is launched by data > 0 */
+	if (ret || data < 0)
+		goto out;
+
+	ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+	if (ret)
+		goto out;
+	/* calculate resistor only in CC charge mode */
+	if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX)
+		goto out;
+
+	/* current is saved */
+	if (set_charger_current(info, 500, &chg_current))
+		goto out;
+
+	/*
+	 * set charge current as 500mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum1 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum1 = ibatt_sum1 - data;	/* discharging */
+		else
+			ibatt_sum1 = ibatt_sum1 + data;	/* charging */
+	}
+
+	if (set_charger_current(info, 100, &ret))
+		goto out_meas;
+	/*
+	 * set charge current as 100mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum2 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum2 = ibatt_sum2 - data;	/* discharging */
+		else
+			ibatt_sum2 = ibatt_sum2 + data;	/* charging */
+	}
+
+	/* restore current setting */
+	if (set_charger_current(info, chg_current, &ret))
+		goto out_meas;
+
+	if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) &&
+			(ibatt_sum2 > 0)) {
+		/* calculate resistor in discharging case */
+		data = 1000 * (vbatt_sum1 - vbatt_sum2)
+		    / (ibatt_sum1 - ibatt_sum2);
+		if ((data - info->resistor > 0) &&
+				(data - info->resistor < info->resistor))
+			info->resistor = data;
+		if ((info->resistor - data > 0) &&
+				(info->resistor - data < data))
+			info->resistor = data;
+	}
+	return 0;
+
+out_meas:
+	set_charger_current(info, chg_current, &ret);
+out:
+	return -EINVAL;
+}
+
+static int calc_capacity(struct pm860x_battery_info *info, int *cap)
+{
+	int ret;
+	int data;
+	int ibat;
+	int cap_ocv = 0;
+	int cap_cc = 0;
+
+	ret = calc_ccnt(info, &ccnt_data);
+	if (ret)
+		goto out;
+soc:
+	data = info->max_capacity * info->start_soc / 100;
+	if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) {
+		cap_cc =
+		    data + ccnt_data.total_chg - ccnt_data.total_dischg;
+	} else {
+		clear_ccnt(info, &ccnt_data);
+		calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc);
+		dev_dbg(info->dev, "restart soc = %d !\n",
+			info->start_soc);
+		goto soc;
+	}
+
+	cap_cc = cap_cc * 100 / info->max_capacity;
+	if (cap_cc < 0)
+		cap_cc = 0;
+	else if (cap_cc > 100)
+		cap_cc = 100;
+
+	dev_dbg(info->dev, "%s, last cap : %d", __func__,
+		info->last_capacity);
+
+	ret = measure_current(info, &ibat);
+	if (ret)
+		goto out;
+	/* Calculate the capacity when discharging(ibat < 0) */
+	if (ibat < 0) {
+		ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv);
+		if (ret)
+			cap_ocv = info->last_capacity;
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		if (data <= LOW_BAT_THRESHOLD) {
+			/* choose the lower capacity value to report
+			 * between vbat and CC when vbat < 3.6v;
+			 * than 3.6v;
+			 */
+			*cap = min(cap_ocv, cap_cc);
+		} else {
+			/* when detect vbat > 3.6v, but cap_cc < 15,and
+			 * cap_ocv is 10% larger than cap_cc, we can think
+			 * CC have some accumulation error, switch to OCV
+			 * to estimate capacity;
+			 * */
+			if (cap_cc < 15 && cap_ocv - cap_cc > 10)
+				*cap = cap_ocv;
+			else
+				*cap = cap_cc;
+		}
+		/* when discharging, make sure current capacity
+		 * is lower than last*/
+		if (*cap > info->last_capacity)
+			*cap = info->last_capacity;
+	} else {
+		*cap = cap_cc;
+	}
+	info->last_capacity = *cap;
+
+	dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n",
+		(ibat < 0) ? "discharging" : "charging",
+		 cap_ocv, cap_cc, *cap);
+	/*
+	 * store the current capacity to RTC domain register,
+	 * after next power up , it will be restored.
+	 */
+	pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB,
+			(*cap & 0x1F) << 3);
+	pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB,
+			((*cap >> 5) & 0x3));
+	return 0;
+out:
+	return ret;
+}
+
+static void pm860x_external_power_changed(struct power_supply *psy)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+	calc_resistor(info);
+}
+
+static int pm860x_batt_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+	int data;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = info->present;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = calc_capacity(info, &data);
+		if (ret)
+			return ret;
+		if (data < 0)
+			data = 0;
+		else if (data > 100)
+			data = 100;
+		/* return 100 if battery is not attached */
+		if (!info->present)
+			data = 100;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* return real vbatt Voltage */
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/* return Open Circuit Voltage (not measured voltage) */
+		ret = calc_ocv(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = measure_current(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (info->present) {
+			ret = measure_temp(info, &data);
+			if (ret)
+				return ret;
+			data *= 10;
+		} else {
+			/* Fake Temp 25C Without Battery */
+			data = 250;
+		}
+		val->intval = data;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int pm860x_batt_set_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		clear_ccnt(info, &ccnt_data);
+		info->start_soc = 100;
+		dev_dbg(info->dev, "chg done, update soc = %d\n",
+			info->start_soc);
+		break;
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+
+static enum power_supply_property pm860x_batt_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static const struct power_supply_desc pm860x_battery_desc = {
+	.name			= "battery-monitor",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= pm860x_batt_props,
+	.num_properties		= ARRAY_SIZE(pm860x_batt_props),
+	.get_property		= pm860x_batt_get_prop,
+	.set_property		= pm860x_batt_set_prop,
+	.external_power_changed	= pm860x_external_power_changed,
+};
+
+static int pm860x_battery_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_battery_info *info;
+	struct pm860x_power_pdata *pdata;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->irq_cc = platform_get_irq(pdev, 0);
+	if (info->irq_cc <= 0)
+		return -EINVAL;
+
+	info->irq_batt = platform_get_irq(pdev, 1);
+	if (info->irq_batt <= 0)
+		return -EINVAL;
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->dev = &pdev->dev;
+	info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	pdata = pdev->dev.platform_data;
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	pm860x_init_battery(info);
+
+	if (pdata && pdata->max_capacity)
+		info->max_capacity = pdata->max_capacity;
+	else
+		info->max_capacity = 1500;	/* set default capacity */
+	if (pdata && pdata->resistor)
+		info->resistor = pdata->resistor;
+	else
+		info->resistor = 300;	/* set default internal resistor */
+
+	info->battery = devm_power_supply_register(&pdev->dev,
+						   &pm860x_battery_desc,
+						   NULL);
+	if (IS_ERR(info->battery))
+		return PTR_ERR(info->battery);
+	info->battery->dev.parent = &pdev->dev;
+
+	ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL,
+					pm860x_coulomb_handler, IRQF_ONESHOT,
+					"coulomb", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_cc, ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL,
+					pm860x_batt_handler,
+					IRQF_ONESHOT, "battery", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_batt, ret);
+		return ret;
+	}
+
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_battery_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_CC;
+	return 0;
+}
+
+static int pm860x_battery_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops,
+			pm860x_battery_suspend, pm860x_battery_resume);
+
+static struct platform_driver pm860x_battery_driver = {
+	.driver = {
+		   .name = "88pm860x-battery",
+		   .pm = &pm860x_battery_pm_ops,
+	},
+	.probe = pm860x_battery_probe,
+};
+module_platform_driver(pm860x_battery_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/88pm860x_charger.c b/drivers/power/supply/88pm860x_charger.c
new file mode 100644
index 000000000..f21ce52fb
--- /dev/null
+++ b/drivers/power/supply/88pm860x_charger.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG		(1 << 2)
+
+/* bit definitions of Reset Out Register */
+#define RESET_SW_PD		(1 << 7)
+
+/* bit definitions of PreReg 1 */
+#define PREREG1_90MA		(0x0)
+#define PREREG1_180MA		(0x1)
+#define PREREG1_450MA		(0x4)
+#define PREREG1_540MA		(0x5)
+#define PREREG1_1350MA		(0xE)
+#define PREREG1_VSYS_4_5V	(3 << 4)
+
+/* bit definitions of Charger Control 1 Register */
+#define CC1_MODE_OFF		(0)
+#define CC1_MODE_PRECHARGE	(1)
+#define CC1_MODE_FASTCHARGE	(2)
+#define CC1_MODE_PULSECHARGE	(3)
+#define CC1_ITERM_20MA		(0 << 2)
+#define CC1_ITERM_60MA		(2 << 2)
+#define CC1_VFCHG_4_2V		(9 << 4)
+
+/* bit definitions of Charger Control 2 Register */
+#define CC2_ICHG_100MA		(0x1)
+#define CC2_ICHG_500MA		(0x9)
+#define CC2_ICHG_1000MA		(0x13)
+
+/* bit definitions of Charger Control 3 Register */
+#define CC3_180MIN_TIMEOUT	(0x6 << 4)
+#define CC3_270MIN_TIMEOUT	(0x7 << 4)
+#define CC3_360MIN_TIMEOUT	(0xA << 4)
+#define CC3_DISABLE_TIMEOUT	(0xF << 4)
+
+/* bit definitions of Charger Control 4 Register */
+#define CC4_IPRE_40MA		(7)
+#define CC4_VPCHG_3_2V		(3 << 4)
+#define CC4_IFCHG_MON_EN	(1 << 6)
+#define CC4_BTEMP_MON_EN	(1 << 7)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_OV_EN		(1 << 2)
+#define CC6_BAT_UV_EN		(1 << 3)
+#define CC6_UV_VBAT_SET		(0x3 << 6)	/* 2.8v */
+
+/* bit definitions of Charger Control 7 Register */
+#define CC7_BAT_REM_EN		(1 << 3)
+#define CC7_IFSM_EN		(1 << 7)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_VBAT		(1 << 0)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT_EN		(1 << 0)
+#define MEAS3_CC_EN		(1 << 2)
+
+#define FSM_INIT		0
+#define FSM_DISCHARGE		1
+#define FSM_PRECHARGE		2
+#define FSM_FASTCHARGE		3
+
+#define PRECHARGE_THRESHOLD	3100
+#define POWEROFF_THRESHOLD	3400
+#define CHARGE_THRESHOLD	4000
+#define DISCHARGE_THRESHOLD	4180
+
+/* over-temperature on PM8606 setting */
+#define OVER_TEMP_FLAG		(1 << 6)
+#define OVTEMP_AUTORECOVER	(1 << 3)
+
+/* over-voltage protect on vchg setting mv */
+#define VCHG_NORMAL_LOW		4200
+#define VCHG_NORMAL_CHECK	5800
+#define VCHG_NORMAL_HIGH	6000
+#define VCHG_OVP_LOW		5500
+
+struct pm860x_charger_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct i2c_client *i2c_8606;
+	struct device *dev;
+
+	struct power_supply *usb;
+	struct mutex lock;
+	int irq_nums;
+	int irq[7];
+	unsigned state:3;	/* fsm state */
+	unsigned online:1;	/* usb charger */
+	unsigned present:1;	/* battery present */
+	unsigned allowed:1;
+};
+
+static char *pm860x_supplied_to[] = {
+	"battery-monitor",
+};
+
+static int measure_vchg(struct pm860x_charger_info *info, int *data)
+{
+	unsigned char buf[2];
+	int ret = 0;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 125) >> 9;
+
+	dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);
+
+	return ret;
+}
+
+static void set_vchg_threshold(struct pm860x_charger_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * / 5 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
+	dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
+	dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);
+
+}
+
+static void set_vbatt_threshold(struct pm860x_charger_info *info,
+				int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * 3 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
+	dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
+	dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);
+
+	return;
+}
+
+static int start_precharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Pre-charging!\n");
+	set_vbatt_threshold(info, 0, 0);
+
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_1350MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	/* stop charging */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_OFF);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set precharge current, termination voltage, IBAT & TBAT monitor */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
+			       CC4_IPRE_40MA | CC4_VPCHG_3_2V |
+			       CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* trigger precharge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_PRECHARGE);
+out:
+	return ret;
+}
+
+static int start_fastcharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Fast-charging!\n");
+
+	/* set fastcharge termination current & voltage, disable charging */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
+			       CC1_MODE_OFF | CC1_ITERM_60MA |
+			       CC1_VFCHG_4_2V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_540MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
+			      CC2_ICHG_500MA);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set IBAT & TBAT monitor */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* launch fast-charge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_FASTCHARGE);
+	/* vchg threshold setting */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
+out:
+	return ret;
+}
+
+static void stop_charge(struct pm860x_charger_info *info, int vbatt)
+{
+	dev_dbg(info->dev, "Stop charging!\n");
+	pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
+	if (vbatt > CHARGE_THRESHOLD && info->online)
+		set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+}
+
+static void power_off_notification(struct pm860x_charger_info *info)
+{
+	dev_dbg(info->dev, "Power-off notification!\n");
+}
+
+static int set_charging_fsm(struct pm860x_charger_info *info)
+{
+	struct power_supply *psy;
+	union power_supply_propval data;
+	unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
+		"fastcharge",
+	};
+	int ret;
+	int vbatt;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		return -EINVAL;
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW,
+			&data);
+	if (ret) {
+		power_supply_put(psy);
+		return ret;
+	}
+	vbatt = data.intval / 1000;
+
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
+	if (ret) {
+		power_supply_put(psy);
+		return ret;
+	}
+	power_supply_put(psy);
+
+	mutex_lock(&info->lock);
+	info->present = data.intval;
+
+	dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
+		"Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);
+
+	switch (info->state) {
+	case FSM_INIT:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt > DISCHARGE_THRESHOLD) {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD) {
+				power_off_notification(info);
+			} else {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			}
+		}
+		break;
+	case FSM_PRECHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt > PRECHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_FASTCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_DISCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD)
+				power_off_notification(info);
+			else if (vbatt > CHARGE_THRESHOLD && info->online)
+				set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+		}
+		break;
+	default:
+		dev_warn(info->dev, "FSM meets wrong state:%d\n",
+			 info->state);
+		break;
+	}
+	dev_dbg(info->dev,
+		"Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	mutex_unlock(&info->lock);
+
+	return 0;
+}
+
+static irqreturn_t pm860x_charger_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
+		(info->online) ? "online" : "N/A", info->allowed);
+
+	set_charging_fsm(info);
+
+	power_supply_changed(info->usb);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_temp_handler(int irq, void *data)
+{
+	struct power_supply *psy;
+	struct pm860x_charger_info *info = data;
+	union power_supply_propval temp;
+	int value;
+	int ret;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		return IRQ_HANDLED;
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
+	if (ret)
+		goto out;
+	value = temp.intval / 10;
+
+	mutex_lock(&info->lock);
+	/* Temperature < -10 C or >40 C, Will not allow charge */
+	if (value < -10 || value > 40)
+		info->allowed = 0;
+	else
+		info->allowed = 1;
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+out:
+	power_supply_put(psy);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_exception_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+	info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);
+
+	set_charging_fsm(info);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_done_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	struct power_supply *psy;
+	union power_supply_propval val;
+	int ret;
+	int vbatt;
+
+	mutex_lock(&info->lock);
+	/* pre-charge done, will transimit to fast-charge stage */
+	if (info->state == FSM_PRECHARGE) {
+		info->allowed = 1;
+		goto out;
+	}
+	/*
+	 * Fast charge done, delay to read
+	 * the correct status of CHG_DET.
+	 */
+	mdelay(5);
+	info->allowed = 0;
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		goto out;
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW,
+			&val);
+	if (ret)
+		goto out_psy_put;
+	vbatt = val.intval / 1000;
+	/*
+	 * CHG_DONE interrupt is faster than CHG_DET interrupt when
+	 * plug in/out usb, So we can not rely on info->online, we
+	 * need check pm8607 status register to check usb is online
+	 * or not, then we can decide it is real charge done
+	 * automatically or it is triggered by usb plug out;
+	 */
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		goto out_psy_put;
+	if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
+		power_supply_set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL,
+				&val);
+
+out_psy_put:
+	power_supply_put(psy);
+out:
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+
+	set_vbatt_threshold(info, 0, 0);
+
+	if (info->present && info->online)
+		info->allowed = 1;
+	else
+		info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vchg_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int vchg = 0;
+
+	if (info->present)
+		goto out;
+
+	measure_vchg(info, &vchg);
+
+	mutex_lock(&info->lock);
+	if (!info->online) {
+		int status;
+		/* check if over-temp on pm8606 or not */
+		status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
+		if (status & OVER_TEMP_FLAG) {
+			/* clear over temp flag and set auto recover */
+			pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
+					OVER_TEMP_FLAG, OVER_TEMP_FLAG);
+			pm860x_set_bits(info->i2c_8606,
+					PM8606_VSYS,
+					OVTEMP_AUTORECOVER,
+					OVTEMP_AUTORECOVER);
+			dev_dbg(info->dev,
+				"%s, pm8606 over-temp occurred\n", __func__);
+		}
+	}
+
+	if (vchg > VCHG_NORMAL_CHECK) {
+		set_vchg_threshold(info, VCHG_OVP_LOW, 0);
+		info->allowed = 0;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg occurred,vchg = %dmv\n",
+			__func__, vchg);
+	} else if (vchg < VCHG_OVP_LOW) {
+		set_vchg_threshold(info, VCHG_NORMAL_LOW,
+				   VCHG_NORMAL_HIGH);
+		info->allowed = 1;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg recover,vchg = %dmv\n",
+			__func__, vchg);
+	}
+	mutex_unlock(&info->lock);
+
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+out:
+	return IRQ_HANDLED;
+}
+
+static int pm860x_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct pm860x_charger_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (info->state == FSM_FASTCHARGE ||
+				info->state == FSM_PRECHARGE)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->online;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static enum power_supply_property pm860x_usb_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int pm860x_init_charger(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+	info->state = FSM_INIT;
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+	return 0;
+}
+
+static struct pm860x_irq_desc {
+	const char *name;
+	irqreturn_t (*handler)(int irq, void *data);
+} pm860x_irq_descs[] = {
+	{ "usb supply detect", pm860x_charger_handler },
+	{ "charge done", pm860x_done_handler },
+	{ "charge timeout", pm860x_exception_handler },
+	{ "charge fault", pm860x_exception_handler },
+	{ "temperature", pm860x_temp_handler },
+	{ "vbatt", pm860x_vbattery_handler },
+	{ "vchg", pm860x_vchg_handler },
+};
+
+static const struct power_supply_desc pm860x_charger_desc = {
+	.name		= "usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= pm860x_usb_props,
+	.num_properties	= ARRAY_SIZE(pm860x_usb_props),
+	.get_property	= pm860x_usb_get_prop,
+};
+
+static int pm860x_charger_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct pm860x_charger_info *info;
+	int ret;
+	int count;
+	int i;
+	int j;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	count = pdev->num_resources;
+	for (i = 0, j = 0; i < count; i++) {
+		info->irq[j] = platform_get_irq(pdev, i);
+		if (info->irq[j] < 0)
+			continue;
+		j++;
+	}
+	info->irq_nums = j;
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->i2c_8606 =
+	    (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
+	if (!info->i2c_8606) {
+		dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	info->dev = &pdev->dev;
+
+	/* set init value for the case we are not using battery */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	psy_cfg.drv_data = info;
+	psy_cfg.supplied_to = pm860x_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
+	info->usb = power_supply_register(&pdev->dev, &pm860x_charger_desc,
+					  &psy_cfg);
+	if (IS_ERR(info->usb)) {
+		ret = PTR_ERR(info->usb);
+		goto out;
+	}
+
+	pm860x_init_charger(info);
+
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
+		ret = request_threaded_irq(info->irq[i], NULL,
+			pm860x_irq_descs[i].handler,
+			IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+				info->irq[i], ret);
+			goto out_irq;
+		}
+	}
+	return 0;
+
+out_irq:
+	power_supply_unregister(info->usb);
+	while (--i >= 0)
+		free_irq(info->irq[i], info);
+out:
+	return ret;
+}
+
+static int pm860x_charger_remove(struct platform_device *pdev)
+{
+	struct pm860x_charger_info *info = platform_get_drvdata(pdev);
+	int i;
+
+	power_supply_unregister(info->usb);
+	for (i = 0; i < info->irq_nums; i++)
+		free_irq(info->irq[i], info);
+	return 0;
+}
+
+static struct platform_driver pm860x_charger_driver = {
+	.driver = {
+		   .name = "88pm860x-charger",
+	},
+	.probe = pm860x_charger_probe,
+	.remove = pm860x_charger_remove,
+};
+module_platform_driver(pm860x_charger_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
new file mode 100644
index 000000000..0bbfe6a7c
--- /dev/null
+++ b/drivers/power/supply/Kconfig
@@ -0,0 +1,921 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig POWER_SUPPLY
+	bool "Power supply class support"
+	help
+	  Say Y here to enable power supply class support. This allows
+	  power supply (batteries, AC, USB) monitoring by userspace
+	  via sysfs and uevent (if available) and/or APM kernel interface
+	  (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+	bool "Power supply debug"
+	help
+	  Say Y here to enable debugging messages for power supply class
+	  and drivers.
+
+config POWER_SUPPLY_HWMON
+	bool
+	prompt "Expose power supply sensors as hwmon device"
+	depends on HWMON=y || HWMON=POWER_SUPPLY
+	default y
+	help
+	  This options enables API that allows sensors found on a
+	  power supply device (current, voltage, temperature) to be
+	  exposed as a hwmon device.
+
+	  Say 'Y' here if you want power supplies to
+	  have hwmon sysfs interface too.
+
+
+config PDA_POWER
+	tristate "Generic PDA/phone power driver"
+	depends on !S390
+	help
+	  Say Y here to enable generic power driver for PDAs and phones with
+	  one or two external power supplies (AC/USB) connected to main and
+	  backup batteries, and optional builtin charger.
+
+config APM_POWER
+	tristate "APM emulation for class batteries"
+	depends on APM_EMULATION
+	help
+	  Say Y here to enable support APM status emulation using
+	  battery class devices.
+
+config GENERIC_ADC_BATTERY
+	tristate "Generic battery support using IIO"
+	depends on IIO
+	help
+	  Say Y here to enable support for the generic battery driver
+	  which uses IIO framework to read adc.
+
+config IP5XXX_POWER
+	tristate "Injoinic IP5xxx power bank IC driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y to include support for Injoinic IP5xxx power bank ICs,
+	  which include a battery charger and a boost converter.
+
+config MAX8925_POWER
+	tristate "MAX8925 battery charger support"
+	depends on MFD_MAX8925
+	help
+	  Say Y here to enable support for the battery charger in the Maxim
+	  MAX8925 PMIC.
+
+config WM831X_BACKUP
+	tristate "WM831X backup battery charger support"
+	depends on MFD_WM831X
+	help
+	  Say Y here to enable support for the backup battery charger
+	  in the Wolfson Microelectronics WM831x PMICs.
+
+config WM831X_POWER
+	tristate "WM831X PMU support"
+	depends on MFD_WM831X
+	help
+	  Say Y here to enable support for the power management unit
+	  provided by Wolfson Microelectronics WM831x PMICs.
+
+config WM8350_POWER
+	tristate "WM8350 PMU support"
+	depends on MFD_WM8350
+	help
+	  Say Y here to enable support for the power management unit
+	  provided by the Wolfson Microelectronics WM8350 PMIC.
+
+config TEST_POWER
+	tristate "Test power driver"
+	help
+	  This driver is used for testing. It's safe to say M here.
+
+config BATTERY_88PM860X
+	tristate "Marvell 88PM860x battery driver"
+	depends on MFD_88PM860X
+	help
+	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
+config CHARGER_ADP5061
+	tristate "ADP5061 battery charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the ADP5061 standalone battery
+	  charger.
+
+	  This driver can be built as a module. If so, the module will be
+	  called adp5061.
+
+config BATTERY_ACT8945A
+	tristate "Active-semi ACT8945A charger driver"
+	depends on MFD_ACT8945A || COMPILE_TEST
+	help
+	  Say Y here to enable support for power supply provided by
+	  Active-semi ActivePath ACT8945A charger.
+
+config BATTERY_CPCAP
+	tristate "Motorola CPCAP PMIC battery driver"
+	depends on MFD_CPCAP && IIO
+	default MFD_CPCAP
+	help
+	  Say Y here to enable support for battery on Motorola
+	  phones and tablets such as droid 4.
+
+config BATTERY_CW2015
+	tristate "CW2015 Battery driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the cellwise cw2015
+	  battery fuel gauge (used in the Pinebook Pro & others)
+
+	  This driver can also be built as a module. If so, the module will be
+	  called cw2015_battery.
+
+config BATTERY_DS2760
+	tristate "DS2760 battery driver (HP iPAQ & others)"
+	depends on W1
+	help
+	  Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_DS2780
+	tristate "DS2780 battery driver"
+	depends on HAS_IOMEM
+	select W1
+	select W1_SLAVE_DS2780
+	help
+	  Say Y here to enable support for batteries with ds2780 chip.
+
+config BATTERY_DS2781
+	tristate "DS2781 battery driver"
+	depends on HAS_IOMEM
+	select W1
+	select W1_SLAVE_DS2781
+	help
+	  If you enable this you will have the DS2781 battery driver support.
+
+	  The battery monitor chip is used in many batteries/devices
+	  as the one who is responsible for charging/discharging/monitoring
+	  Li+ batteries.
+
+	  If you are unsure, say N.
+
+config BATTERY_DS2782
+	tristate "DS2782/DS2786 standalone gas-gauge"
+	depends on I2C
+	help
+	  Say Y here to enable support for the DS2782/DS2786 standalone battery
+	  gas-gauge.
+
+config BATTERY_LEGO_EV3
+	tristate "LEGO MINDSTORMS EV3 battery"
+	depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
+	help
+	  Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
+
+config BATTERY_PMU
+	tristate "Apple PMU battery"
+	depends on PPC32 && ADB_PMU
+	help
+	  Say Y here to expose battery information on Apple machines
+	  through the generic battery class.
+
+config BATTERY_OLPC
+	tristate "One Laptop Per Child battery"
+	depends on OLPC_EC
+	help
+	  Say Y to enable support for the battery on the OLPC laptop.
+
+config BATTERY_SAMSUNG_SDI
+	bool "Samsung SDI batteries"
+	help
+	  Say Y to enable support for Samsung SDI battery data.
+	  These batteries are used in Samsung mobile phones.
+
+config BATTERY_TOSA
+	tristate "Sharp SL-6000 (tosa) battery"
+	depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-6000 (tosa) models.
+
+config BATTERY_COLLIE
+	tristate "Sharp SL-5500 (collie) battery"
+	depends on SA1100_COLLIE && MCP_UCB1200
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-5500 (collie) models.
+
+config BATTERY_INGENIC
+	tristate "Ingenic JZ47xx SoCs battery driver"
+	depends on MIPS || COMPILE_TEST
+	depends on INGENIC_ADC
+	help
+	  Choose this option if you want to monitor battery status on
+	  Ingenic JZ47xx SoC based devices.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ingenic-battery.
+
+config BATTERY_IPAQ_MICRO
+	tristate "iPAQ Atmel Micro ASIC battery driver"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Choose this option if you want to monitor battery status on
+	  Compaq/HP iPAQ h3100 and h3600.
+
+config BATTERY_WM97XX
+	bool "WM97xx generic battery driver"
+	depends on TOUCHSCREEN_WM97XX=y
+	help
+	  Say Y to enable support for battery measured by WM97xx aux port.
+
+config BATTERY_SBS
+	tristate "SBS Compliant gas gauge"
+	depends on I2C
+	help
+	  Say Y to include support for SBS battery driver for SBS-compliant
+	  gas gauges.
+
+config CHARGER_SBS
+	tristate "SBS Compliant charger"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y to include support for SBS compliant battery chargers.
+
+config MANAGER_SBS
+	tristate "Smart Battery System Manager"
+	depends on I2C && I2C_MUX && GPIOLIB
+	select I2C_SMBUS
+	help
+	  Say Y here to include support for Smart Battery System Manager
+	  ICs. The driver reports online and charging status via sysfs.
+	  It presents itself also as I2C mux which allows to bind
+	  smart battery driver to its ports.
+	  Supported is for example LTC1760.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called sbs-manager.
+
+config BATTERY_BQ27XXX
+	tristate "BQ27xxx battery driver"
+	help
+	  Say Y here to enable support for batteries with BQ27xxx chips.
+
+config BATTERY_BQ27XXX_I2C
+	tristate "BQ27xxx I2C support"
+	depends on BATTERY_BQ27XXX
+	depends on I2C
+	default y
+	help
+	  Say Y here to enable support for batteries with BQ27xxx chips
+	  connected over an I2C bus.
+
+config BATTERY_BQ27XXX_HDQ
+	tristate "BQ27xxx HDQ support"
+	depends on BATTERY_BQ27XXX
+	depends on W1
+	default y
+	help
+	  Say Y here to enable support for batteries with BQ27xxx chips
+	  connected over an HDQ bus.
+
+config BATTERY_BQ27XXX_DT_UPDATES_NVM
+	bool "BQ27xxx support for update of NVM/flash data memory"
+	depends on BATTERY_BQ27XXX_I2C
+	help
+	  Say Y here to enable devicetree monitored-battery config to update
+	  NVM/flash data memory. Only enable this option for devices with a
+	  fuel gauge mounted on the circuit board, and a battery that cannot
+	  easily be replaced with one of a different type. Not for
+	  general-purpose kernels, as this can cause misconfiguration of a
+	  smart battery with embedded NVM/flash.
+
+config BATTERY_DA9030
+	tristate "DA9030 battery driver"
+	depends on PMIC_DA903X
+	help
+	  Say Y here to enable support for batteries charger integrated into
+	  DA9030 PMIC.
+
+config BATTERY_DA9052
+	tristate "Dialog DA9052 Battery"
+	depends on PMIC_DA9052
+	help
+	  Say Y here to enable support for batteries charger integrated into
+	  DA9052 PMIC.
+
+config CHARGER_DA9150
+	tristate "Dialog Semiconductor DA9150 Charger support"
+	depends on MFD_DA9150
+	depends on DA9150_GPADC
+	depends on IIO
+	help
+	  Say Y here to enable support for charger unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-charger.
+
+config BATTERY_DA9150
+	tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+	depends on MFD_DA9150
+	help
+	  Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+	  Integrated Charger & Fuel-Gauge IC
+
+	  This driver can also be built as a module. If so, the module will be
+	  called da9150-fg.
+
+config CHARGER_AXP20X
+	tristate "X-Powers AXP20X and AXP22X AC power supply driver"
+	depends on MFD_AXP20X
+	depends on AXP20X_ADC
+	depends on IIO
+	help
+	  Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
+	  power supply.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called axp20x_ac_power.
+
+config BATTERY_AXP20X
+	tristate "X-Powers AXP20X battery driver"
+	depends on MFD_AXP20X
+	depends on AXP20X_ADC
+	depends on IIO
+	help
+	  Say Y here to enable support for X-Powers AXP20X PMICs' battery power
+	  supply.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called axp20x_battery.
+
+config AXP20X_POWER
+	tristate "AXP20x power supply driver"
+	depends on MFD_AXP20X
+	depends on IIO
+	help
+	  This driver provides support for the power supply features of
+	  AXP20x PMIC.
+
+config AXP288_CHARGER
+	tristate "X-Powers AXP288 Charger"
+	depends on MFD_AXP20X && EXTCON_AXP288 && IOSF_MBI && ACPI
+	help
+	  Say yes here to have support X-Power AXP288 power management IC (PMIC)
+	  integrated charger.
+
+config AXP288_FUEL_GAUGE
+	tristate "X-Powers AXP288 Fuel Gauge"
+	depends on MFD_AXP20X && IIO && IOSF_MBI && ACPI
+	help
+	  Say yes here to have support for X-Power power management IC (PMIC)
+	  Fuel Gauge. The device provides battery statistics and status
+	  monitoring as well as alerts for battery over/under voltage and
+	  over/under temperature.
+
+config BATTERY_MAX17040
+	tristate "Maxim MAX17040/17041/17043 family Fuel Gauge"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver supports Maxim fuel-gauge systems for lithium-ion (Li+)
+	  batteries used mainly in handheld and portable equipment.
+	  Supported devices: max17040, max17041, max17043, max17044, max17048,
+	  max17049, max17058, max17059, max77836.
+
+	  Driver supports reporting SOC (State of Charge, i.e capacity),
+	  voltage and configurable low-SOC wakeup interrupt.
+
+	  Driver can be build as a module (max17040_battery).
+
+config BATTERY_MAX17042
+	tristate "Maxim MAX17042/17047/17050/8997/8966 family Fuel Gauge"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
+	  in handheld and portable equipment. The MAX17042 is configured
+	  to operate with a single lithium cell. MAX8997 and MAX8966 are
+	  multi-function devices that include fuel gauages that are compatible
+	  with MAX17042.
+	  Supported devices: max8966, max8997, max17042, max17047, max17050,
+	  max17055, max77693, max77849.
+
+	  Driver can be build as a module (max17042_battery).
+
+config BATTERY_MAX1721X
+	tristate "MAX17211/MAX17215 standalone gas-gauge"
+	depends on W1
+	select REGMAP_W1
+	help
+	  MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+	  in handheld and portable equipment. MAX17211 used with single cell
+	  battery. MAX17215 designed for muticell battery. Both them have
+	  OneWire (W1) host interface.
+
+	  Say Y here to enable support for the MAX17211/MAX17215 standalone
+	  battery gas-gauge.
+
+config BATTERY_Z2
+	tristate "Z2 battery driver"
+	depends on I2C && MACH_ZIPIT2
+	help
+	  Say Y to include support for the battery on the Zipit Z2.
+
+config BATTERY_S3C_ADC
+	tristate "Battery driver for Samsung ADC based monitoring"
+	depends on S3C_ADC
+	help
+	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
+config BATTERY_TWL4030_MADC
+	tristate "TWL4030 MADC battery driver"
+	depends on TWL4030_MADC
+	help
+	  Say Y here to enable this dumb driver for batteries managed
+	  through the TWL4030 MADC.
+
+config CHARGER_88PM860X
+	tristate "Marvell 88PM860x Charger driver"
+	depends on MFD_88PM860X && BATTERY_88PM860X
+	help
+	  Say Y here to enable charger for Marvell 88PM860x chip.
+
+config CHARGER_PCF50633
+	tristate "NXP PCF50633 MBC"
+	depends on MFD_PCF50633
+	help
+	  Say Y to include support for NXP PCF50633 Main Battery Charger.
+
+config BATTERY_RX51
+	tristate "Nokia RX-51 (N900) battery driver"
+	depends on TWL4030_MADC
+	help
+	  Say Y here to enable support for battery information on Nokia
+	  RX-51, also known as N900 tablet.
+
+config CHARGER_CPCAP
+	tristate "CPCAP PMIC Charger Driver"
+	depends on MFD_CPCAP && IIO
+	depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
+	default MFD_CPCAP
+	help
+	  Say Y to enable support for CPCAP PMIC charger driver for Motorola
+	  mobile devices such as Droid 4.
+
+config CHARGER_ISP1704
+	tristate "ISP1704 USB Charger Detection"
+	depends on USB_PHY
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+	help
+	  Say Y to enable support for USB Charger Detection with
+	  ISP1707/ISP1704 USB transceivers.
+
+config CHARGER_MAX8903
+	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+	help
+	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+	  The driver supports controlling charger-enable and current-limit
+	  pins based on the status of charger connections with interrupt
+	  handlers.
+
+config CHARGER_TWL4030
+	tristate "OMAP TWL4030 BCI charger driver"
+	depends on IIO && TWL4030_CORE
+	help
+	  Say Y here to enable support for TWL4030 Battery Charge Interface.
+
+config CHARGER_LP8727
+	tristate "TI/National Semiconductor LP8727 charger driver"
+	depends on I2C
+	help
+	  Say Y here to enable support for LP8727 Charger Driver.
+
+config CHARGER_LP8788
+	tristate "TI LP8788 charger driver"
+	depends on MFD_LP8788
+	depends on LP8788_ADC
+	depends on IIO
+	help
+	  Say Y to enable support for the LP8788 linear charger.
+
+config CHARGER_GPIO
+	tristate "GPIO charger"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y to include support for chargers which report their online status
+	  through a GPIO pin.
+
+	  This driver can be build as a module. If so, the module will be
+	  called gpio-charger.
+
+config CHARGER_MANAGER
+	tristate "Battery charger manager for multiple chargers"
+	depends on REGULATOR
+	select EXTCON
+	help
+	  Say Y to enable charger-manager support, which allows multiple
+	  chargers attached to a battery and multiple batteries attached to a
+	  system. The charger-manager also can monitor charging status in
+	  runtime and in suspend-to-RAM by waking up the system periodically
+	  with help of suspend_again support.
+
+config CHARGER_LT3651
+	tristate "Analog Devices LT3651 charger"
+	depends on GPIOLIB
+	help
+	  Say Y to include support for the Analog Devices (Linear Technology)
+	  LT3651 battery charger which reports its status via GPIO lines.
+
+config CHARGER_LTC4162L
+	tristate "LTC4162-L charger"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y to include support for the Analog Devices (Linear Technology)
+	  LTC4162-L battery charger connected to I2C.
+
+config CHARGER_MAX14577
+	tristate "Maxim MAX14577/77836 battery charger driver"
+	depends on MFD_MAX14577
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX14577/77836 MUICs.
+
+config CHARGER_DETECTOR_MAX14656
+	tristate "Maxim MAX14656 USB charger detector"
+	depends on I2C
+	depends on OF
+	help
+	  Say Y to enable support for the Maxim MAX14656 USB charger detector.
+	  The device is compliant with the USB Battery Charging Specification
+	  Revision 1.2 and can be found e.g. in Kindle 4/5th generation
+	  readers and certain LG devices.
+
+config CHARGER_MAX77650
+	tristate "Maxim MAX77650 battery charger driver"
+	depends on MFD_MAX77650
+	help
+	  Say Y to enable support for the battery charger control of MAX77650
+	  PMICs.
+
+config CHARGER_MAX77693
+	tristate "Maxim MAX77693 battery charger driver"
+	depends on MFD_MAX77693
+	help
+	  Say Y to enable support for the Maxim MAX77693 battery charger.
+
+config CHARGER_MAX77976
+	tristate "Maxim MAX77976 battery charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  The Maxim MAX77976 is a 19 Vin, 5.5A 1-Cell Li+ Battery Charger
+	  USB OTG support. It has an I2C interface for configuration.
+
+	  Say Y to enable support for the Maxim MAX77976 battery charger.
+	  This driver can also be built as a module. If so, the module will be
+	  called max77976_charger.
+
+config CHARGER_MAX8997
+	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
+	depends on MFD_MAX8997 && REGULATOR_MAX8997
+	depends on EXTCON || !EXTCON
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX8997/LP3974 PMICs.
+
+config CHARGER_MAX8998
+	tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
+	depends on MFD_MAX8998 && REGULATOR_MAX8998
+	help
+	  Say Y to enable support for the battery charger control sysfs and
+	  platform data of MAX8998/LP3974 PMICs.
+
+config CHARGER_MP2629
+	tristate "Monolithic power system MP2629 Battery charger"
+	depends on MFD_MP2629
+	depends on MP2629_ADC
+	depends on IIO
+	help
+	  Select this option to enable support for Monolithic power system
+	  Battery charger. This driver provides Battery charger power management
+	  functions on the systems.
+
+config CHARGER_MT6360
+	tristate "Mediatek MT6360 Charger Driver"
+	depends on MFD_MT6360
+	depends on REGULATOR
+	select LINEAR_RANGES
+	help
+	  Say Y here to enable MT6360 Charger Part.
+	  The device supports High-Accuracy Voltage/Current Regulation,
+	  Average Input Current Regulation, Battery Temperature Sensing,
+	  Over-Temperature Protection, DPDM Detection for BC1.2.
+
+config CHARGER_MT6370
+	tristate "MediaTek MT6370 Charger Driver"
+	depends on MFD_MT6370
+	depends on REGULATOR
+	depends on IIO
+	select LINEAR_RANGES
+	help
+	  Say Y here to enable MT6370 Charger Part.
+	  The device supports High-Accuracy Voltage/Current Regulation,
+	  Average Input Current Regulation, Battery Temperature Sensing,
+	  Over-Temperature Protection, DPDM Detection for BC1.2.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "mt6370-charger".
+
+config CHARGER_QCOM_SMBB
+	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+	depends on MFD_SPMI_PMIC || COMPILE_TEST
+	depends on OF
+	depends on EXTCON
+	depends on REGULATOR
+	help
+	  Say Y to include support for the Switch-Mode Battery Charger and
+	  Boost (SMBB) hardware found in Qualcomm PM8941 PMICs.  The charger
+	  is an integrated, single-cell lithium-ion battery charger.  DT
+	  configuration is required for loading, see the devicetree
+	  documentation for more detail.  The base name for this driver is
+	  'pm8941_charger'.
+
+config CHARGER_BQ2415X
+	tristate "TI BQ2415x battery charger driver"
+	depends on I2C
+	help
+	  Say Y to enable support for the TI BQ2415x battery charger
+	  PMICs.
+
+	  You'll need this driver to charge batteries on e.g. Nokia
+	  RX-51/N900.
+
+config CHARGER_BQ24190
+	tristate "TI BQ24190 battery charger driver"
+	depends on I2C
+	depends on EXTCON
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y to enable support for the TI BQ24190 battery charger.
+
+config CHARGER_BQ24257
+	tristate "TI BQ24250/24251/24257 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+	  chargers.
+
+config CHARGER_BQ24735
+	tristate "TI BQ24735 battery charger support"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y to enable support for the TI BQ24735 battery charger.
+
+config CHARGER_BQ2515X
+	tristate "TI BQ2515X battery charger family"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ2515X family of battery
+	  charging integrated circuits. The BQ2515X are highly integrated
+	  battery charge management ICs that integrate the most common
+	  functions for wearable devices, namely a charger, an output voltage
+	  rail, ADC for battery and system monitoring, and push-button
+	  controller.
+
+config CHARGER_BQ25890
+	tristate "TI BQ25890 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ25890 battery charger.
+
+config CHARGER_BQ25980
+	tristate "TI BQ25980 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960
+	  series of fast battery chargers.
+
+config CHARGER_BQ256XX
+	tristate "TI BQ256XX battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ256XX battery chargers. The
+	  BQ256XX family of devices are highly-integrated, switch-mode battery
+	  charge management and system power path management devices for single
+	  cell Li-ion and Li-polymer batteries.
+
+config CHARGER_RK817
+	tristate "Rockchip RK817 PMIC Battery Charger"
+	depends on MFD_RK808
+	help
+	  Say Y to include support for Rockchip RK817 Battery Charger.
+
+config CHARGER_SMB347
+	tristate "Summit Microelectronics SMB3XX Battery Charger"
+	depends on I2C
+	depends on REGULATOR
+	select REGMAP_I2C
+	help
+	  Say Y to include support for Summit Microelectronics SMB345,
+	  SMB347 or SMB358 Battery Charger.
+
+config CHARGER_TPS65090
+	tristate "TPS65090 battery charger driver"
+	depends on MFD_TPS65090
+	help
+	  Say Y here to enable support for battery charging with TPS65090
+	  PMIC chips.
+
+config CHARGER_TPS65217
+	tristate "TPS65217 battery charger driver"
+	depends on MFD_TPS65217
+	help
+	  Say Y here to enable support for battery charging with TPS65217
+	  PMIC chips.
+
+config BATTERY_GAUGE_LTC2941
+	tristate "LTC2941/LTC2943 Battery Gauge Driver"
+	depends on I2C
+	help
+	  Say Y here to include support for LTC2941 and LTC2943 Battery
+	  Gauge IC. The driver reports the charge count continuously, and
+	  measures the voltage and temperature every 10 seconds.
+
+config AB8500_BM
+	bool "AB8500 Battery Management Driver"
+	depends on AB8500_CORE && AB8500_GPADC && (IIO = y) && OF
+	select THERMAL
+	select THERMAL_OF
+	help
+	  Say Y to include support for AB8500 battery management.
+
+config BATTERY_GOLDFISH
+	tristate "Goldfish battery driver"
+	depends on HAS_IOMEM
+	help
+	  Say Y to enable support for the Goldfish battery and AC power
+	  driver. Originated in the Android Studio Emulator (goldfish) it is
+	  going to be used in other emulators.
+
+config BATTERY_RT5033
+	tristate "RT5033 fuel gauge support"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+	  The fuelgauge calculates and determines the battery state of charge
+	  according to battery open circuit voltage.
+
+config CHARGER_RT9455
+	tristate "Richtek RT9455 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for Richtek RT9455 battery charger.
+
+config CHARGER_CROS_USBPD
+	tristate "ChromeOS EC based USBPD charger"
+	depends on CROS_USBPD_NOTIFY
+	help
+	  Say Y here to enable ChromeOS EC based USBPD charger
+	  driver. This driver gets various bits of information about
+	  what is connected to USB PD ports from the EC and converts
+	  that into power_supply properties.
+
+config CHARGER_CROS_PCHG
+	tristate "ChromeOS EC based peripheral charger"
+	depends on MFD_CROS_EC_DEV
+	default MFD_CROS_EC_DEV
+	help
+	  Say Y here to enable ChromeOS EC based peripheral charge driver.
+	  This driver gets various information about the devices connected to
+	  the peripheral charge ports from the EC and converts that into
+	  power_supply properties.
+
+config CHARGER_SC2731
+	tristate "Spreadtrum SC2731 charger driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  Say Y here to enable support for battery charging with SC2731
+	  PMIC chips.
+
+config FUEL_GAUGE_SC27XX
+	tristate "Spreadtrum SC27XX fuel gauge driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	depends on IIO
+	help
+	  Say Y here to enable support for fuel gauge with SC27XX
+	  PMIC chips.
+
+config CHARGER_UCS1002
+	tristate "Microchip UCS1002 USB Port Power Controller"
+	depends on I2C
+	depends on OF
+	depends on REGULATOR
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for Microchip UCS1002 Programmable
+	  USB Port Power Controller with Charger Emulation.
+
+config CHARGER_BD99954
+	tristate "ROHM bd99954 charger driver"
+	depends on I2C
+	select LINEAR_RANGES
+	help
+	  Say Y here to enable support for getting battery and charger
+	  information and altering charger configurations from the ROHM
+	  BD99954 charger IC.
+
+config CHARGER_WILCO
+	tristate "Wilco EC based charger for ChromeOS"
+	depends on WILCO_EC
+	help
+	  Say Y here to enable control of the charging routines performed
+	  by the Embedded Controller on the Chromebook named Wilco. Further
+	  information can be found in
+	  Documentation/ABI/testing/sysfs-class-power-wilco
+
+config RN5T618_POWER
+	tristate "RN5T618 charger/fuel gauge support"
+	depends on MFD_RN5T618
+	depends on RN5T618_ADC
+	depends on IIO
+	help
+	  Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
+	  This driver can also be built as a module. If so, the module will be
+	  called rn5t618_power.
+
+config BATTERY_ACER_A500
+	tristate "Acer Iconia Tab A500 battery driver"
+	depends on MFD_ACER_A500_EC
+	help
+	  Say Y to include support for Acer Iconia Tab A500 battery fuel gauge.
+
+config BATTERY_SURFACE
+	tristate "Battery driver for 7th-generation Microsoft Surface devices"
+	depends on SURFACE_AGGREGATOR_REGISTRY
+	help
+	  Driver for battery devices connected via/managed by the Surface System
+	  Aggregator Module (SSAM).
+
+	  This driver provides battery-information and -status support for
+	  Surface devices where said data is not exposed via the standard ACPI
+	  devices. On those models (7th-generation), battery-information is
+	  instead handled directly via SSAM client devices and this driver.
+
+	  Say M or Y here to include battery status support for 7th-generation
+	  Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3,
+	  Surface Book 3, and Surface Laptop Go.
+
+config CHARGER_SURFACE
+	tristate "AC driver for 7th-generation Microsoft Surface devices"
+	depends on SURFACE_AGGREGATOR_REGISTRY
+	help
+	  Driver for AC devices connected via/managed by the Surface System
+	  Aggregator Module (SSAM).
+
+	  This driver provides AC-information and -status support for Surface
+	  devices where said data is not exposed via the standard ACPI devices.
+	  On those models (7th-generation), AC-information is instead handled
+	  directly via a SSAM client device and this driver.
+
+	  Say M or Y here to include AC status support for 7th-generation
+	  Microsoft Surface devices, i.e. Surface Pro 7, Surface Laptop 3,
+	  Surface Book 3, and Surface Laptop Go.
+
+config BATTERY_UG3105
+	tristate "uPI uG3105 battery monitor driver"
+	depends on I2C
+	help
+	  Battery monitor driver for the uPI uG3105 battery monitor.
+
+	  Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead
+	  it is expected to be use in combination with some always on
+	  microcontroller reading its coulomb-counter before it can wrap
+	  (it must be read every 400 seconds!).
+
+	  Since Linux does not monitor coulomb-counter changes while the
+	  device is off or suspended, the functionality of this driver is
+	  limited to reporting capacity only.
+
+endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
new file mode 100644
index 000000000..0ee8653e8
--- /dev/null
+++ b/drivers/power/supply/Makefile
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
+
+power_supply-y				:= power_supply_core.o
+power_supply-$(CONFIG_SYSFS)		+= power_supply_sysfs.o
+power_supply-$(CONFIG_LEDS_TRIGGERS)	+= power_supply_leds.o
+
+obj-$(CONFIG_POWER_SUPPLY)	+= power_supply.o
+obj-$(CONFIG_POWER_SUPPLY_HWMON) += power_supply_hwmon.o
+obj-$(CONFIG_GENERIC_ADC_BATTERY)	+= generic-adc-battery.o
+
+obj-$(CONFIG_PDA_POWER)		+= pda_power.o
+obj-$(CONFIG_APM_POWER)		+= apm_power.o
+obj-$(CONFIG_AXP20X_POWER)	+= axp20x_usb_power.o
+obj-$(CONFIG_IP5XXX_POWER)	+= ip5xxx_power.o
+obj-$(CONFIG_MAX8925_POWER)	+= max8925_power.o
+obj-$(CONFIG_WM831X_BACKUP)	+= wm831x_backup.o
+obj-$(CONFIG_WM831X_POWER)	+= wm831x_power.o
+obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
+obj-$(CONFIG_TEST_POWER)	+= test_power.o
+
+obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
+obj-$(CONFIG_CHARGER_ADP5061)	+= adp5061.o
+obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
+obj-$(CONFIG_BATTERY_AXP20X)	+= axp20x_battery.o
+obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
+obj-$(CONFIG_BATTERY_CPCAP)	+= cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015)	+= cw2015_battery.o
+obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
+obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+obj-$(CONFIG_BATTERY_GAUGE_LTC2941)	+= ltc2941-battery-gauge.o
+obj-$(CONFIG_BATTERY_GOLDFISH)	+= goldfish_battery.o
+obj-$(CONFIG_BATTERY_LEGO_EV3)	+= lego_ev3_battery.o
+obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
+obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+obj-$(CONFIG_BATTERY_SAMSUNG_SDI)	+= samsung-sdi-battery.o
+obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
+obj-$(CONFIG_BATTERY_INGENIC)	+= ingenic-battery.o
+obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
+obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
+obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
+obj-$(CONFIG_CHARGER_SBS)	+= sbs-charger.o
+obj-$(CONFIG_MANAGER_SBS)	+= sbs-manager.o
+obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
+obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
+obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
+obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
+obj-$(CONFIG_BATTERY_DA9150)	+= da9150-fg.o
+obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
+obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X)	+= max1721x_battery.o
+obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
+obj-$(CONFIG_BATTERY_RT5033)	+= rt5033_battery.o
+obj-$(CONFIG_CHARGER_RT9455)	+= rt9455_charger.o
+obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
+obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
+obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
+obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
+obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o ab8500_chargalg.o
+obj-$(CONFIG_CHARGER_CPCAP)	+= cpcap-charger.o
+obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
+obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
+obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
+obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
+obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
+obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
+obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
+obj-$(CONFIG_CHARGER_LT3651)	+= lt3651-charger.o
+obj-$(CONFIG_CHARGER_LTC4162L)	+= ltc4162-l-charger.o
+obj-$(CONFIG_CHARGER_MAX14577)	+= max14577_charger.o
+obj-$(CONFIG_CHARGER_DETECTOR_MAX14656)	+= max14656_charger_detector.o
+obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
+obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
+obj-$(CONFIG_CHARGER_MAX77976)	+= max77976_charger.o
+obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
+obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_CHARGER_MP2629)	+= mp2629_charger.o
+obj-$(CONFIG_CHARGER_MT6360)	+= mt6360_charger.o
+obj-$(CONFIG_CHARGER_MT6370)	+= mt6370-charger.o
+obj-$(CONFIG_CHARGER_QCOM_SMBB)	+= qcom_smbb.o
+obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
+obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
+obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
+obj-$(CONFIG_CHARGER_BQ25980)	+= bq25980_charger.o
+obj-$(CONFIG_CHARGER_BQ256XX)	+= bq256xx_charger.o
+obj-$(CONFIG_CHARGER_RK817)	+= rk817_charger.o
+obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
+obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
+obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
+obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
+obj-$(CONFIG_AXP288_CHARGER)	+= axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o
+obj-$(CONFIG_CHARGER_CROS_PCHG)	+= cros_peripheral_charger.o
+obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o
+obj-$(CONFIG_FUEL_GAUGE_SC27XX)	+= sc27xx_fuel_gauge.o
+obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
+obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
+obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o
+obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o
+obj-$(CONFIG_BATTERY_ACER_A500)	+= acer_a500_battery.o
+obj-$(CONFIG_BATTERY_SURFACE)	+= surface_battery.o
+obj-$(CONFIG_CHARGER_SURFACE)	+= surface_charger.o
+obj-$(CONFIG_BATTERY_UG3105)	+= ug3105_battery.o
diff --git a/drivers/power/supply/ab8500-bm.h b/drivers/power/supply/ab8500-bm.h
new file mode 100644
index 000000000..180a016b3
--- /dev/null
+++ b/drivers/power/supply/ab8500-bm.h
@@ -0,0 +1,427 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _AB8500_CHARGER_H_
+#define _AB8500_CHARGER_H_
+
+#include <linux/kernel.h>
+
+/*
+ * System control 2 register offsets.
+ * bank = 0x02
+ */
+#define AB8500_MAIN_WDOG_CTRL_REG	0x01
+#define AB8500_LOW_BAT_REG		0x03
+#define AB8500_BATT_OK_REG		0x04
+/*
+ * USB/ULPI register offsets
+ * Bank : 0x5
+ */
+#define AB8500_USB_LINE_STAT_REG	0x80
+#define AB8500_USB_LINE_CTRL2_REG	0x82
+#define AB8500_USB_LINK1_STAT_REG	0x94
+
+/*
+ * Charger / status register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_STATUS1_REG		0x00
+#define AB8500_CH_STATUS2_REG		0x01
+#define AB8500_CH_USBCH_STAT1_REG	0x02
+#define AB8500_CH_USBCH_STAT2_REG	0x03
+#define AB8540_CH_USBCH_STAT3_REG	0x04
+#define AB8500_CH_STAT_REG		0x05
+
+/*
+ * Charger / control register offfsets
+ * Bank : 0x0B
+ */
+#define AB8500_CH_VOLT_LVL_REG		0x40
+#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/
+#define AB8500_CH_OPT_CRNTLVL_REG	0x42
+#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/
+#define AB8500_CH_WD_TIMER_REG		0x50
+#define AB8500_CHARG_WD_CTRL		0x51
+#define AB8500_BTEMP_HIGH_TH		0x52
+#define AB8500_LED_INDICATOR_PWM_CTRL	0x53
+#define AB8500_LED_INDICATOR_PWM_DUTY	0x54
+#define AB8500_BATT_OVV			0x55
+#define AB8500_CHARGER_CTRL		0x56
+#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/
+
+/*
+ * Charger / main control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_MCH_CTRL1		0x80
+#define AB8500_MCH_CTRL2		0x81
+#define AB8500_MCH_IPT_CURLVL_REG	0x82
+#define AB8500_CH_WD_REG		0x83
+
+/*
+ * Charger / USB control register offsets
+ * Bank : 0x0B
+ */
+#define AB8500_USBCH_CTRL1_REG		0xC0
+#define AB8500_USBCH_CTRL2_REG		0xC1
+#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2
+#define AB8540_USB_PP_MODE_REG		0xC5
+#define AB8540_USB_PP_CHR_REG		0xC6
+
+/*
+ * Gas Gauge register offsets
+ * Bank : 0x0C
+ */
+#define AB8500_GASG_CC_CTRL_REG		0x00
+#define AB8500_GASG_CC_ACCU1_REG	0x01
+#define AB8500_GASG_CC_ACCU2_REG	0x02
+#define AB8500_GASG_CC_ACCU3_REG	0x03
+#define AB8500_GASG_CC_ACCU4_REG	0x04
+#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05
+#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06
+#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07
+#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08
+#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09
+#define AB8500_GASG_CC_OFFSET_REG	0x0A
+#define AB8500_GASG_CC_NCOV_ACCU	0x10
+#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11
+#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12
+#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13
+#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE2_REG		0x01
+#define AB8500_IT_SOURCE21_REG		0x14
+
+/*
+ * RTC register offsets
+ * Bank: 0x0F
+ */
+#define AB8500_RTC_BACKUP_CHG_REG	0x0C
+#define AB8500_RTC_CC_CONF_REG		0x01
+#define AB8500_RTC_CTRL_REG		0x0B
+#define AB8500_RTC_CTRL1_REG		0x11
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_OTP_CONF_15		0x0E
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define ADC_RESOLUTION			1024
+#define ADC_CH_MAIN_MIN			0
+#define ADC_CH_MAIN_MAX			20030
+#define ADC_CH_VBUS_MIN			0
+#define ADC_CH_VBUS_MAX			20030
+#define ADC_CH_VBAT_MIN			2300
+#define ADC_CH_VBAT_MAX			4800
+#define ADC_CH_BKBAT_MIN		0
+#define ADC_CH_BKBAT_MAX		3200
+
+/* Main charge i/p current */
+#define MAIN_CH_IP_CUR_0P9A		0x80
+#define MAIN_CH_IP_CUR_1P0A		0x90
+#define MAIN_CH_IP_CUR_1P1A		0xA0
+#define MAIN_CH_IP_CUR_1P2A		0xB0
+#define MAIN_CH_IP_CUR_1P3A		0xC0
+#define MAIN_CH_IP_CUR_1P4A		0xD0
+#define MAIN_CH_IP_CUR_1P5A		0xE0
+
+/* ChVoltLevel */
+#define CH_VOL_LVL_3P5			0x00
+#define CH_VOL_LVL_4P0			0x14
+#define CH_VOL_LVL_4P05			0x16
+#define CH_VOL_LVL_4P1			0x1B
+#define CH_VOL_LVL_4P15			0x20
+#define CH_VOL_LVL_4P2			0x25
+#define CH_VOL_LVL_4P6			0x4D
+
+/* ChOutputCurrentLevel */
+#define CH_OP_CUR_LVL_0P1		0x00
+#define CH_OP_CUR_LVL_0P2		0x01
+#define CH_OP_CUR_LVL_0P3		0x02
+#define CH_OP_CUR_LVL_0P4		0x03
+#define CH_OP_CUR_LVL_0P5		0x04
+#define CH_OP_CUR_LVL_0P6		0x05
+#define CH_OP_CUR_LVL_0P7		0x06
+#define CH_OP_CUR_LVL_0P8		0x07
+#define CH_OP_CUR_LVL_0P9		0x08
+#define CH_OP_CUR_LVL_1P4		0x0D
+#define CH_OP_CUR_LVL_1P5		0x0E
+#define CH_OP_CUR_LVL_1P6		0x0F
+#define CH_OP_CUR_LVL_2P		0x3F
+
+/* BTEMP High thermal limits */
+#define BTEMP_HIGH_TH_57_0		0x00
+#define BTEMP_HIGH_TH_52		0x01
+#define BTEMP_HIGH_TH_57_1		0x02
+#define BTEMP_HIGH_TH_62		0x03
+
+#define LOW_BAT_3P1V			0x20
+#define LOW_BAT_2P3V			0x00
+#define LOW_BAT_RESET			0x01
+#define LOW_BAT_ENABLE			0x01
+
+/* Backup battery constants */
+#define BUP_ICH_SEL_50UA		0x00
+#define BUP_ICH_SEL_150UA		0x04
+#define BUP_ICH_SEL_300UA		0x08
+#define BUP_ICH_SEL_700UA		0x0C
+
+enum bup_vch_sel {
+	BUP_VCH_SEL_2P5V,
+	BUP_VCH_SEL_2P6V,
+	BUP_VCH_SEL_2P8V,
+	BUP_VCH_SEL_3P1V,
+	/*
+	 * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
+	 * are only available on ab8540. You can't choose these 5
+	 * voltage on ab8500/ab8505/ab9540.
+	 */
+	BUP_VCH_SEL_2P7V,
+	BUP_VCH_SEL_2P9V,
+	BUP_VCH_SEL_3P0V,
+	BUP_VCH_SEL_3P2V,
+	BUP_VCH_SEL_3P3V,
+};
+
+#define BUP_VCH_RANGE		0x02
+#define VBUP33_VRTCN		0x01
+
+/* Battery OVV constants */
+#define BATT_OVV_ENA			0x02
+#define BATT_OVV_TH_3P7			0x00
+#define BATT_OVV_TH_4P75		0x01
+
+/* A value to indicate over voltage (microvolts) */
+#define BATT_OVV_VALUE			4750000
+
+/* VBUS OVV constants */
+#define VBUS_OVV_SELECT_MASK		0x78
+#define VBUS_OVV_SELECT_5P6V		0x00
+#define VBUS_OVV_SELECT_5P7V		0x08
+#define VBUS_OVV_SELECT_5P8V		0x10
+#define VBUS_OVV_SELECT_5P9V		0x18
+#define VBUS_OVV_SELECT_6P0V		0x20
+#define VBUS_OVV_SELECT_6P1V		0x28
+#define VBUS_OVV_SELECT_6P2V		0x30
+#define VBUS_OVV_SELECT_6P3V		0x38
+
+#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04
+
+/* Fuel Gauge constants */
+#define RESET_ACCU			0x02
+#define READ_REQ			0x01
+#define CC_DEEP_SLEEP_ENA		0x02
+#define CC_PWR_UP_ENA			0x01
+#define CC_SAMPLES_40			0x28
+#define RD_NCONV_ACCU_REQ		0x01
+#define CC_CALIB			0x08
+#define CC_INTAVGOFFSET_ENA		0x10
+#define CC_MUXOFFSET			0x80
+#define CC_INT_CAL_N_AVG_MASK		0x60
+#define CC_INT_CAL_SAMPLES_16		0x40
+#define CC_INT_CAL_SAMPLES_8		0x20
+#define CC_INT_CAL_SAMPLES_4		0x00
+
+/* RTC constants */
+#define RTC_BUP_CH_ENA			0x10
+
+/* BatCtrl Current Source Constants */
+#define BAT_CTRL_7U_ENA			0x01
+#define BAT_CTRL_20U_ENA		0x02
+#define BAT_CTRL_18U_ENA		0x01
+#define BAT_CTRL_16U_ENA		0x02
+#define BAT_CTRL_CMP_ENA		0x04
+#define FORCE_BAT_CTRL_CMP_HIGH		0x08
+#define BAT_CTRL_PULL_UP_ENA		0x10
+
+/* Battery type */
+#define BATTERY_UNKNOWN			00
+
+/* Registers for pcut feature in ab8505 and ab9540 */
+#define AB8505_RTC_PCUT_CTL_STATUS_REG	0x12
+#define AB8505_RTC_PCUT_TIME_REG	0x13
+#define AB8505_RTC_PCUT_MAX_TIME_REG	0x14
+#define AB8505_RTC_PCUT_FLAG_TIME_REG	0x15
+#define AB8505_RTC_PCUT_RESTART_REG	0x16
+#define AB8505_RTC_PCUT_DEBOUNCE_REG	0x17
+
+/* USB Power Path constants for ab8540 */
+#define BUS_VSYS_VOL_SELECT_MASK		0x06
+#define BUS_VSYS_VOL_SELECT_3P6V		0x00
+#define BUS_VSYS_VOL_SELECT_3P325V		0x02
+#define BUS_VSYS_VOL_SELECT_3P9V		0x04
+#define BUS_VSYS_VOL_SELECT_4P3V		0x06
+#define BUS_POWER_PATH_MODE_ENA			0x01
+#define BUS_PP_PRECHG_CURRENT_MASK		0x0E
+#define BUS_POWER_PATH_PRECHG_ENA		0x01
+
+/* Forward declaration */
+struct ab8500_fg;
+
+/**
+ * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
+ * if not specified
+ * @recovery_sleep_timer:	Time between measurements while recovering
+ * @recovery_total_time:	Total recovery time
+ * @init_timer:			Measurement interval during startup
+ * @init_discard_time:		Time we discard voltage measurement at startup
+ * @init_total_time:		Total init time during startup
+ * @high_curr_time:		Time current has to be high to go to recovery
+ * @accu_charging:		FG accumulation time while charging
+ * @accu_high_curr_ua:		FG accumulation time in high current mode
+ * @high_curr_threshold_ua:	High current threshold, in uA
+ * @lowbat_threshold_uv:	Low battery threshold, in uV
+ * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
+ *				Resolution in 50 mV step.
+ * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
+ *				Resolution in 50 mV step.
+ * @user_cap_limit		Capacity reported from user must be within this
+ *				limit to be considered as sane, in percentage
+ *				points.
+ * @maint_thres			This is the threshold where we stop reporting
+ *				battery full while in maintenance, in per cent
+ * @pcut_enable:			Enable power cut feature in ab8505
+ * @pcut_max_time:		Max time threshold
+ * @pcut_flag_time:		Flagtime threshold
+ * @pcut_max_restart:		Max number of restarts
+ * @pcut_debounce_time:		Sets battery debounce time
+ */
+struct ab8500_fg_parameters {
+	int recovery_sleep_timer;
+	int recovery_total_time;
+	int init_timer;
+	int init_discard_time;
+	int init_total_time;
+	int high_curr_time;
+	int accu_charging;
+	int accu_high_curr;
+	int high_curr_threshold_ua;
+	int lowbat_threshold_uv;
+	int battok_falling_th_sel0;
+	int battok_raising_th_sel1;
+	int user_cap_limit;
+	int maint_thres;
+	bool pcut_enable;
+	u8 pcut_max_time;
+	u8 pcut_flag_time;
+	u8 pcut_max_restart;
+	u8 pcut_debounce_time;
+};
+
+/**
+ * struct ab8500_charger_maximization - struct used by the board config.
+ * @use_maxi:		Enable maximization for this battery type
+ * @maxi_chg_curr_ua:	Maximum charger current allowed in microampere
+ * @maxi_wait_cycles:	cycles to wait before setting charger current
+ * @charger_curr_step_ua: delta between two charger current settings (uA)
+ */
+struct ab8500_maxim_parameters {
+	bool ena_maxi;
+	int chg_curr_ua;
+	int wait_cycles;
+	int charger_curr_step_ua;
+};
+
+/**
+ * struct ab8500_bm_capacity_levels - ab8500 capacity level data
+ * @critical:		critical capacity level in percent
+ * @low:		low capacity level in percent
+ * @normal:		normal capacity level in percent
+ * @high:		high capacity level in percent
+ * @full:		full capacity level in percent
+ */
+struct ab8500_bm_capacity_levels {
+	int critical;
+	int low;
+	int normal;
+	int high;
+	int full;
+};
+
+/**
+ * struct ab8500_bm_charger_parameters - Charger specific parameters
+ * @usb_volt_max_uv:	maximum allowed USB charger voltage in uV
+ * @usb_curr_max_ua:	maximum allowed USB charger current in uA
+ * @ac_volt_max_uv:	maximum allowed AC charger voltage in uV
+ * @ac_curr_max_ua:	maximum allowed AC charger current in uA
+ */
+struct ab8500_bm_charger_parameters {
+	int usb_volt_max_uv;
+	int usb_curr_max_ua;
+	int ac_volt_max_uv;
+	int ac_curr_max_ua;
+};
+
+/**
+ * struct ab8500_bm_data - ab8500 battery management data
+ * @bi			battery info from device tree
+ * @temp_now		present battery temperature
+ * @temp_interval_chg	temperature measurement interval in s when charging
+ * @temp_interval_nochg	temperature measurement interval in s when not charging
+ * @main_safety_tmr_h	safety timer for main charger
+ * @usb_safety_tmr_h	safety timer for usb charger
+ * @bkup_bat_v		voltage which we charge the backup battery with
+ * @bkup_bat_i		current which we charge the backup battery with
+ * @capacity_scaling    indicates whether capacity scaling is to be used
+ * @chg_unknown_bat	flag to enable charging of unknown batteries
+ * @enable_overshoot	flag to enable VBAT overshoot control
+ * @auto_trig		flag to enable auto adc trigger
+ * @fg_res		resistance of FG resistor in 0.1mOhm
+ * @interval_charging	charge alg cycle period time when charging (sec)
+ * @interval_not_charging charge alg cycle period time when not charging (sec)
+ * @temp_hysteresis	temperature hysteresis
+ * @maxi		maximization parameters
+ * @cap_levels		capacity in percent for the different capacity levels
+ * @chg_params		charger parameters
+ * @fg_params		fuel gauge parameters
+ */
+struct ab8500_bm_data {
+	struct power_supply_battery_info *bi;
+	int temp_now;
+	int temp_interval_chg;
+	int temp_interval_nochg;
+	int main_safety_tmr_h;
+	int usb_safety_tmr_h;
+	int bkup_bat_v;
+	int bkup_bat_i;
+	bool capacity_scaling;
+	bool chg_unknown_bat;
+	bool enable_overshoot;
+	bool auto_trig;
+	int fg_res;
+	int interval_charging;
+	int interval_not_charging;
+	int temp_hysteresis;
+	const struct ab8500_maxim_parameters *maxi;
+	const struct ab8500_bm_capacity_levels *cap_levels;
+	const struct ab8500_bm_charger_parameters *chg_params;
+	const struct ab8500_fg_parameters *fg_params;
+};
+
+/* Forward declaration */
+struct ab8500_fg;
+
+extern struct ab8500_bm_data ab8500_bm_data;
+
+void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
+struct ab8500_fg *ab8500_fg_get(void);
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di);
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
+int ab8500_bm_of_probe(struct power_supply *psy,
+		       struct ab8500_bm_data *bm);
+void ab8500_bm_of_remove(struct power_supply *psy,
+			 struct ab8500_bm_data *bm);
+
+extern struct platform_driver ab8500_fg_driver;
+extern struct platform_driver ab8500_btemp_driver;
+extern struct platform_driver ab8500_chargalg_driver;
+
+#endif /* _AB8500_CHARGER_H_ */
diff --git a/drivers/power/supply/ab8500-chargalg.h b/drivers/power/supply/ab8500-chargalg.h
new file mode 100644
index 000000000..8534d067b
--- /dev/null
+++ b/drivers/power/supply/ab8500-chargalg.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
+ */
+
+#ifndef _AB8500_CHARGALG_H_
+#define _AB8500_CHARGALG_H_
+
+#include <linux/power_supply.h>
+
+/*
+ * Valid only for supplies of type:
+ * - POWER_SUPPLY_TYPE_MAINS,
+ * - POWER_SUPPLY_TYPE_USB,
+ * because only them store as drv_data pointer to struct ux500_charger.
+ */
+#define psy_to_ux500_charger(x) power_supply_get_drvdata(x)
+
+/* Forward declaration */
+struct ux500_charger;
+
+struct ux500_charger_ops {
+	int (*enable) (struct ux500_charger *, int, int, int);
+	int (*check_enable) (struct ux500_charger *, int, int);
+	int (*kick_wd) (struct ux500_charger *);
+	int (*update_curr) (struct ux500_charger *, int);
+};
+
+/**
+ * struct ux500_charger - power supply ux500 charger sub class
+ * @psy			power supply base class
+ * @ops			ux500 charger operations
+ * @max_out_volt_uv	maximum output charger voltage in uV
+ * @max_out_curr_ua	maximum output charger current in uA
+ * @enabled		indicates if this charger is used or not
+ */
+struct ux500_charger {
+	struct power_supply *psy;
+	struct ux500_charger_ops ops;
+	int max_out_volt_uv;
+	int max_out_curr_ua;
+	int wdt_refresh;
+	bool enabled;
+};
+
+#endif /* _AB8500_CHARGALG_H_ */
diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c
new file mode 100644
index 000000000..3e6ea2237
--- /dev/null
+++ b/drivers/power/supply/ab8500_bmdata.c
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include <linux/power_supply.h>
+#include <linux/of.h>
+
+#include "ab8500-bm.h"
+
+/* Default: under this temperature, charging is stopped */
+#define AB8500_TEMP_UNDER	3
+/* Default: between this temp and AB8500_TEMP_UNDER charging is reduced */
+#define AB8500_TEMP_LOW		8
+/* Default: between this temp and AB8500_TEMP_OVER charging is reduced */
+#define AB8500_TEMP_HIGH	43
+/* Default: over this temp, charging is stopped */
+#define AB8500_TEMP_OVER	48
+/* Default: temperature hysteresis */
+#define AB8500_TEMP_HYSTERESIS	3
+
+static struct power_supply_battery_ocv_table ocv_cap_tbl[] = {
+	{ .ocv = 4186000, .capacity = 100},
+	{ .ocv = 4163000, .capacity = 99},
+	{ .ocv = 4114000, .capacity = 95},
+	{ .ocv = 4068000, .capacity = 90},
+	{ .ocv = 3990000, .capacity = 80},
+	{ .ocv = 3926000, .capacity = 70},
+	{ .ocv = 3898000, .capacity = 65},
+	{ .ocv = 3866000, .capacity = 60},
+	{ .ocv = 3833000, .capacity = 55},
+	{ .ocv = 3812000, .capacity = 50},
+	{ .ocv = 3787000, .capacity = 40},
+	{ .ocv = 3768000, .capacity = 30},
+	{ .ocv = 3747000, .capacity = 25},
+	{ .ocv = 3730000, .capacity = 20},
+	{ .ocv = 3705000, .capacity = 15},
+	{ .ocv = 3699000, .capacity = 14},
+	{ .ocv = 3684000, .capacity = 12},
+	{ .ocv = 3672000, .capacity = 9},
+	{ .ocv = 3657000, .capacity = 7},
+	{ .ocv = 3638000, .capacity = 6},
+	{ .ocv = 3556000, .capacity = 4},
+	{ .ocv = 3424000, .capacity = 2},
+	{ .ocv = 3317000, .capacity = 1},
+	{ .ocv = 3094000, .capacity = 0},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work. Factory resistance is 300 mOhm and the
+ * resistance values to the right are percentages of 300 mOhm.
+ */
+static struct power_supply_resistance_temp_table temp_to_batres_tbl_thermistor[] = {
+	{ .temp = 40, .resistance = 40 /* 120 mOhm */ },
+	{ .temp = 30, .resistance = 45 /* 135 mOhm */ },
+	{ .temp = 20, .resistance = 55 /* 165 mOhm */ },
+	{ .temp = 10, .resistance = 77 /* 230 mOhm */ },
+	{ .temp = 00, .resistance = 108 /* 325 mOhm */ },
+	{ .temp = -10, .resistance = 158 /* 445 mOhm */ },
+	{ .temp = -20, .resistance = 198 /* 595 mOhm */ },
+};
+
+static struct power_supply_maintenance_charge_table ab8500_maint_charg_table[] = {
+	{
+		/* Maintenance charging phase A, 60 hours */
+		.charge_current_max_ua = 400000,
+		.charge_voltage_max_uv = 4050000,
+		.charge_safety_timer_minutes = 60*60,
+	},
+	{
+		/* Maintenance charging phase B, 200 hours */
+		.charge_current_max_ua = 400000,
+		.charge_voltage_max_uv = 4000000,
+		.charge_safety_timer_minutes = 200*60,
+	}
+};
+
+static const struct ab8500_bm_capacity_levels cap_levels = {
+	.critical	= 2,
+	.low		= 10,
+	.normal		= 70,
+	.high		= 95,
+	.full		= 100,
+};
+
+static const struct ab8500_fg_parameters fg = {
+	.recovery_sleep_timer = 10,
+	.recovery_total_time = 100,
+	.init_timer = 1,
+	.init_discard_time = 5,
+	.init_total_time = 40,
+	.high_curr_time = 60,
+	.accu_charging = 30,
+	.accu_high_curr = 30,
+	.high_curr_threshold_ua = 50000,
+	.lowbat_threshold_uv = 3100000,
+	.battok_falling_th_sel0 = 2860,
+	.battok_raising_th_sel1 = 2860,
+	.maint_thres = 95,
+	.user_cap_limit = 15,
+	.pcut_enable = 1,
+	.pcut_max_time = 127,
+	.pcut_flag_time = 112,
+	.pcut_max_restart = 15,
+	.pcut_debounce_time = 2,
+};
+
+static const struct ab8500_maxim_parameters ab8500_maxi_params = {
+	.ena_maxi = true,
+	.chg_curr_ua = 910000,
+	.wait_cycles = 10,
+	.charger_curr_step_ua = 100000,
+};
+
+static const struct ab8500_bm_charger_parameters chg = {
+	.usb_volt_max_uv	= 5500000,
+	.usb_curr_max_ua	= 1500000,
+	.ac_volt_max_uv		= 7500000,
+	.ac_curr_max_ua		= 1500000,
+};
+
+/* This is referenced directly in the charger code */
+struct ab8500_bm_data ab8500_bm_data = {
+	.main_safety_tmr_h      = 4,
+	.temp_interval_chg      = 20,
+	.temp_interval_nochg    = 120,
+	.usb_safety_tmr_h       = 4,
+	.bkup_bat_v             = BUP_VCH_SEL_2P6V,
+	.bkup_bat_i             = BUP_ICH_SEL_150UA,
+	.capacity_scaling       = false,
+	.chg_unknown_bat        = false,
+	.enable_overshoot       = false,
+	.fg_res                 = 100,
+	.cap_levels             = &cap_levels,
+	.interval_charging      = 5,
+	.interval_not_charging  = 120,
+	.maxi                   = &ab8500_maxi_params,
+	.chg_params             = &chg,
+	.fg_params              = &fg,
+};
+
+int ab8500_bm_of_probe(struct power_supply *psy,
+		       struct ab8500_bm_data *bm)
+{
+	struct power_supply_battery_info *bi;
+	struct device *dev = &psy->dev;
+	int ret;
+
+	ret = power_supply_get_battery_info(psy, &bm->bi);
+	if (ret) {
+		dev_err(dev, "cannot retrieve battery info\n");
+		return ret;
+	}
+	bi = bm->bi;
+
+	/* Fill in defaults for any data missing from the device tree */
+	if (bi->charge_full_design_uah < 0)
+		/* The default capacity is 612 mAh for unknown batteries */
+		bi->charge_full_design_uah = 612000;
+
+	/*
+	 * All of these voltages need to be specified or we will simply
+	 * fall back to safe defaults.
+	 */
+	if ((bi->voltage_min_design_uv < 0) ||
+	    (bi->voltage_max_design_uv < 0)) {
+		/* Nominal voltage is 3.7V for unknown batteries */
+		bi->voltage_min_design_uv = 3700000;
+		/* Termination voltage 4.05V */
+		bi->voltage_max_design_uv = 4050000;
+	}
+
+	if (bi->constant_charge_current_max_ua < 0)
+		bi->constant_charge_current_max_ua = 400000;
+
+	if (bi->constant_charge_voltage_max_uv < 0)
+		bi->constant_charge_voltage_max_uv = 4100000;
+
+	if (bi->charge_term_current_ua)
+		/* Charging stops when we drop below this current */
+		bi->charge_term_current_ua = 200000;
+
+	if (!bi->maintenance_charge || !bi->maintenance_charge_size) {
+		bi->maintenance_charge = ab8500_maint_charg_table;
+		bi->maintenance_charge_size = ARRAY_SIZE(ab8500_maint_charg_table);
+	}
+
+	if (bi->alert_low_temp_charge_current_ua < 0 ||
+	    bi->alert_low_temp_charge_voltage_uv < 0)
+	{
+		bi->alert_low_temp_charge_current_ua = 300000;
+		bi->alert_low_temp_charge_voltage_uv = 4000000;
+	}
+	if (bi->alert_high_temp_charge_current_ua < 0 ||
+	    bi->alert_high_temp_charge_voltage_uv < 0)
+	{
+		bi->alert_high_temp_charge_current_ua = 300000;
+		bi->alert_high_temp_charge_voltage_uv = 4000000;
+	}
+
+	/*
+	 * Internal resistance and factory resistance are tightly coupled
+	 * so both MUST be defined or we fall back to defaults.
+	 */
+	if ((bi->factory_internal_resistance_uohm < 0) ||
+	    !bi->resist_table) {
+		bi->factory_internal_resistance_uohm = 300000;
+		bi->resist_table = temp_to_batres_tbl_thermistor;
+		bi->resist_table_size = ARRAY_SIZE(temp_to_batres_tbl_thermistor);
+	}
+
+	/* The default battery is emulated by a resistor at 7K */
+	if (bi->bti_resistance_ohm < 0 ||
+	    bi->bti_resistance_tolerance < 0) {
+		bi->bti_resistance_ohm = 7000;
+		bi->bti_resistance_tolerance = 20;
+	}
+
+	if (!bi->ocv_table[0]) {
+		/* Default capacity table at say 25 degrees Celsius */
+		bi->ocv_temp[0] = 25;
+		bi->ocv_table[0] = ocv_cap_tbl;
+		bi->ocv_table_size[0] = ARRAY_SIZE(ocv_cap_tbl);
+	}
+
+	if (bi->temp_min == INT_MIN)
+		bi->temp_min = AB8500_TEMP_UNDER;
+	if (bi->temp_max == INT_MAX)
+		bi->temp_max = AB8500_TEMP_OVER;
+	if (bi->temp_alert_min == INT_MIN)
+		bi->temp_alert_min = AB8500_TEMP_LOW;
+	if (bi->temp_alert_max == INT_MAX)
+		bi->temp_alert_max = AB8500_TEMP_HIGH;
+	bm->temp_hysteresis = AB8500_TEMP_HYSTERESIS;
+
+	return 0;
+}
+
+void ab8500_bm_of_remove(struct power_supply *psy,
+			 struct ab8500_bm_data *bm)
+{
+	power_supply_put_battery_info(psy, bm->bi);
+}
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
new file mode 100644
index 000000000..ce36d6ca3
--- /dev/null
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Battery temperature driver for AB8500
+ *
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/component.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/thermal.h>
+#include <linux/iio/consumer.h>
+#include <linux/fixp-arith.h>
+
+#include "ab8500-bm.h"
+
+#define BTEMP_THERMAL_LOW_LIMIT		-10
+#define BTEMP_THERMAL_MED_LIMIT		0
+#define BTEMP_THERMAL_HIGH_LIMIT_52	52
+#define BTEMP_THERMAL_HIGH_LIMIT_57	57
+#define BTEMP_THERMAL_HIGH_LIMIT_62	62
+
+#define BTEMP_BATCTRL_CURR_SRC_7UA	7
+#define BTEMP_BATCTRL_CURR_SRC_20UA	20
+
+#define BTEMP_BATCTRL_CURR_SRC_16UA	16
+#define BTEMP_BATCTRL_CURR_SRC_18UA	18
+
+#define BTEMP_BATCTRL_CURR_SRC_60UA	60
+#define BTEMP_BATCTRL_CURR_SRC_120UA	120
+
+/**
+ * struct ab8500_btemp_interrupts - ab8500 interrupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_btemp_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_btemp_events {
+	bool batt_rem;
+	bool btemp_high;
+	bool btemp_medhigh;
+	bool btemp_lowmed;
+	bool btemp_low;
+	bool ac_conn;
+	bool usb_conn;
+};
+
+struct ab8500_btemp_ranges {
+	int btemp_high_limit;
+	int btemp_med_limit;
+	int btemp_low_limit;
+};
+
+/**
+ * struct ab8500_btemp - ab8500 BTEMP device information
+ * @dev:		Pointer to the structure device
+ * @node:		List of AB8500 BTEMPs, hence prepared for reentrance
+ * @curr_source:	What current source we use, in uA
+ * @bat_temp:		Dispatched battery temperature in degree Celsius
+ * @prev_bat_temp	Last measured battery temperature in degree Celsius
+ * @parent:		Pointer to the struct ab8500
+ * @tz:			Thermal zone for the battery
+ * @adc_bat_ctrl:	ADC channel for the battery control
+ * @fg:			Pointer to the struct fg
+ * @bm:           	Platform specific battery management information
+ * @btemp_psy:		Structure for BTEMP specific battery properties
+ * @events:		Structure for information about events triggered
+ * @btemp_ranges:	Battery temperature range structure
+ * @btemp_wq:		Work queue for measuring the temperature periodically
+ * @btemp_periodic_work:	Work for measuring the temperature periodically
+ * @initialized:	True if battery id read.
+ */
+struct ab8500_btemp {
+	struct device *dev;
+	struct list_head node;
+	int curr_source;
+	int bat_temp;
+	int prev_bat_temp;
+	struct ab8500 *parent;
+	struct thermal_zone_device *tz;
+	struct iio_channel *bat_ctrl;
+	struct ab8500_fg *fg;
+	struct ab8500_bm_data *bm;
+	struct power_supply *btemp_psy;
+	struct ab8500_btemp_events events;
+	struct ab8500_btemp_ranges btemp_ranges;
+	struct workqueue_struct *btemp_wq;
+	struct delayed_work btemp_periodic_work;
+	bool initialized;
+};
+
+/* BTEMP power supply properties */
+static enum power_supply_property ab8500_btemp_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static LIST_HEAD(ab8500_btemp_list);
+
+/**
+ * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
+ * @di:		pointer to the ab8500_btemp structure
+ * @v_batctrl:	measured batctrl voltage
+ * @inst_curr:	measured instant current
+ *
+ * This function returns the battery resistance that is
+ * derived from the BATCTRL voltage.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
+	int v_batctrl, int inst_curr)
+{
+	if (is_ab8500_1p1_or_earlier(di->parent)) {
+		/*
+		 * For ABB cut1.0 and 1.1 BAT_CTRL is internally
+		 * connected to 1.8V through a 450k resistor
+		 */
+		return (450000 * (v_batctrl)) / (1800 - v_batctrl);
+	}
+
+	/*
+	 * BAT_CTRL is internally
+	 * connected to 1.8V through a 80k resistor
+	 */
+	return (80000 * (v_batctrl)) / (1800 - v_batctrl);
+}
+
+/**
+ * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function returns the voltage on BATCTRL. Returns value in mV.
+ */
+static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
+{
+	int vbtemp, ret;
+	static int prev;
+
+	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+	if (ret < 0) {
+		dev_err(di->dev,
+			"%s ADC conversion failed, using previous value",
+			__func__);
+		return prev;
+	}
+	prev = vbtemp;
+	return vbtemp;
+}
+
+/**
+ * ab8500_btemp_get_batctrl_res() - get battery resistance
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function returns the battery pack identification resistance.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
+{
+	int ret;
+	int batctrl = 0;
+	int res;
+	int inst_curr;
+	int i;
+
+	if (!di->fg)
+		di->fg = ab8500_fg_get();
+	if (!di->fg) {
+		dev_err(di->dev, "No fg found\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_fg_inst_curr_start(di->fg);
+
+	if (ret) {
+		dev_err(di->dev, "Failed to start current measurement\n");
+		return ret;
+	}
+
+	do {
+		msleep(20);
+	} while (!ab8500_fg_inst_curr_started(di->fg));
+
+	i = 0;
+
+	do {
+		batctrl += ab8500_btemp_read_batctrl_voltage(di);
+		i++;
+		msleep(20);
+	} while (!ab8500_fg_inst_curr_done(di->fg));
+	batctrl /= i;
+
+	ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
+	if (ret) {
+		dev_err(di->dev, "Failed to finalize current measurement\n");
+		return ret;
+	}
+
+	res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
+
+	dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
+		__func__, batctrl, res, inst_curr, i);
+
+	return res;
+}
+
+/**
+ * ab8500_btemp_id() - Identify the connected battery
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function will try to identify the battery by reading the ID
+ * resistor. Some brands use a combined ID resistor with a NTC resistor to
+ * both be able to identify and to read the temperature of it.
+ */
+static int ab8500_btemp_id(struct ab8500_btemp *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	int res;
+
+	di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
+
+	res =  ab8500_btemp_get_batctrl_res(di);
+	if (res < 0) {
+		dev_err(di->dev, "%s get batctrl res failed\n", __func__);
+		return -ENXIO;
+	}
+
+	if (power_supply_battery_bti_in_range(bi, res)) {
+		dev_info(di->dev, "Battery detected on BATCTRL (pin C3)"
+			 " resistance %d Ohm = %d Ohm +/- %d%%\n",
+			 res, bi->bti_resistance_ohm,
+			 bi->bti_resistance_tolerance);
+	} else {
+		dev_warn(di->dev, "Battery identified as unknown"
+			 ", resistance %d Ohm\n", res);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+/**
+ * ab8500_btemp_periodic_work() - Measuring the temperature periodically
+ * @work:	pointer to the work_struct structure
+ *
+ * Work function for measuring the temperature periodically
+ */
+static void ab8500_btemp_periodic_work(struct work_struct *work)
+{
+	int interval;
+	int bat_temp;
+	struct ab8500_btemp *di = container_of(work,
+		struct ab8500_btemp, btemp_periodic_work.work);
+	/* Assume 25 degrees celsius as start temperature */
+	static int prev = 25;
+	int ret;
+
+	if (!di->initialized) {
+		/* Identify the battery */
+		if (ab8500_btemp_id(di) < 0)
+			dev_warn(di->dev, "failed to identify the battery\n");
+	}
+
+	/* Failover if a reading is erroneous, use last meausurement */
+	ret = thermal_zone_get_temp(di->tz, &bat_temp);
+	if (ret) {
+		dev_err(di->dev, "error reading temperature\n");
+		bat_temp = prev;
+	} else {
+		/* Convert from millicentigrades to centigrades */
+		bat_temp /= 1000;
+		prev = bat_temp;
+	}
+
+	/*
+	 * Filter battery temperature.
+	 * Allow direct updates on temperature only if two samples result in
+	 * same temperature. Else only allow 1 degree change from previous
+	 * reported value in the direction of the new measurement.
+	 */
+	if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
+		if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
+			di->initialized = true;
+			di->bat_temp = bat_temp;
+			power_supply_changed(di->btemp_psy);
+		}
+	} else if (bat_temp < di->prev_bat_temp) {
+		di->bat_temp--;
+		power_supply_changed(di->btemp_psy);
+	} else if (bat_temp > di->prev_bat_temp) {
+		di->bat_temp++;
+		power_supply_changed(di->btemp_psy);
+	}
+	di->prev_bat_temp = bat_temp;
+
+	if (di->events.ac_conn || di->events.usb_conn)
+		interval = di->bm->temp_interval_chg;
+	else
+		interval = di->bm->temp_interval_nochg;
+
+	/* Schedule a new measurement */
+	queue_delayed_work(di->btemp_wq,
+		&di->btemp_periodic_work,
+		round_jiffies(interval * HZ));
+}
+
+/**
+ * ab8500_btemp_batctrlindb_handler() - battery removal detected
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+	dev_err(di->dev, "Battery removal detected!\n");
+
+	di->events.batt_rem = true;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	if (is_ab8500_3p3_or_earlier(di->parent)) {
+		dev_dbg(di->dev, "Ignore false btemp low irq"
+			" for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
+	} else {
+		dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
+
+		di->events.btemp_low = true;
+		di->events.btemp_high = false;
+		di->events.btemp_medhigh = false;
+		di->events.btemp_lowmed = false;
+		power_supply_changed(di->btemp_psy);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_temphigh_handler() - battery temp higher than max temp
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
+
+	di->events.btemp_high = true;
+	di->events.btemp_medhigh = false;
+	di->events.btemp_lowmed = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_lowmed_handler() - battery temp between low and medium
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_dbg(di->dev, "Battery temperature is between low and medium\n");
+
+	di->events.btemp_lowmed = true;
+	di->events.btemp_medhigh = false;
+	di->events.btemp_high = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_medhigh_handler() - battery temp between medium and high
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_dbg(di->dev, "Battery temperature is between medium and high\n");
+
+	di->events.btemp_medhigh = true;
+	di->events.btemp_lowmed = false;
+	di->events.btemp_high = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_periodic() - Periodic temperature measurements
+ * @di:		pointer to the ab8500_btemp structure
+ * @enable:	enable or disable periodic temperature measurements
+ *
+ * Starts of stops periodic temperature measurements. Periodic measurements
+ * should only be done when a charger is connected.
+ */
+static void ab8500_btemp_periodic(struct ab8500_btemp *di,
+	bool enable)
+{
+	dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
+		enable);
+	/*
+	 * Make sure a new measurement is done directly by cancelling
+	 * any pending work
+	 */
+	cancel_delayed_work_sync(&di->btemp_periodic_work);
+
+	if (enable)
+		queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
+}
+
+/**
+ * ab8500_btemp_get_temp() - get battery temperature
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature
+ */
+static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
+{
+	int temp = 0;
+
+	/*
+	 * The BTEMP events are not reliabe on AB8500 cut3.3
+	 * and prior versions
+	 */
+	if (is_ab8500_3p3_or_earlier(di->parent)) {
+		temp = di->bat_temp * 10;
+	} else {
+		if (di->events.btemp_low) {
+			if (temp > di->btemp_ranges.btemp_low_limit)
+				temp = di->btemp_ranges.btemp_low_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_high) {
+			if (temp < di->btemp_ranges.btemp_high_limit)
+				temp = di->btemp_ranges.btemp_high_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_lowmed) {
+			if (temp > di->btemp_ranges.btemp_med_limit)
+				temp = di->btemp_ranges.btemp_med_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_medhigh) {
+			if (temp < di->btemp_ranges.btemp_med_limit)
+				temp = di->btemp_ranges.btemp_med_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else
+			temp = di->bat_temp * 10;
+	}
+	return temp;
+}
+
+/**
+ * ab8500_btemp_get_property() - get the btemp properties
+ * @psy:        pointer to the power_supply structure
+ * @psp:        pointer to the power_supply_property structure
+ * @val:        pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the btemp
+ * properties by reading the sysfs files.
+ * online:	presence of the battery
+ * present:	presence of the battery
+ * technology:	battery technology
+ * temp:	battery temperature
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_btemp_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_btemp *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (di->events.batt_rem)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = ab8500_btemp_get_temp(di);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_btemp *di;
+	union power_supply_propval ret;
+	int j;
+
+	psy = (struct power_supply *)data;
+	di = power_supply_get_drvdata(psy);
+
+	/*
+	 * For all psy where the name of your driver
+	 * appears in any supplied_to
+	 */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_PRESENT:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC disconnected */
+				if (!ret.intval && di->events.ac_conn) {
+					di->events.ac_conn = false;
+				}
+				/* AC connected */
+				else if (ret.intval && !di->events.ac_conn) {
+					di->events.ac_conn = true;
+					if (!di->events.usb_conn)
+						ab8500_btemp_periodic(di, true);
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB disconnected */
+				if (!ret.intval && di->events.usb_conn) {
+					di->events.usb_conn = false;
+				}
+				/* USB connected */
+				else if (ret.intval && !di->events.usb_conn) {
+					di->events.usb_conn = true;
+					if (!di->events.ac_conn)
+						ab8500_btemp_periodic(di, true);
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_btemp_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is pointing to the function pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in the external power
+ * supply to the btemp.
+ */
+static void ab8500_btemp_external_power_changed(struct power_supply *psy)
+{
+	class_for_each_device(power_supply_class, NULL, psy,
+			      ab8500_btemp_get_ext_psy_data);
+}
+
+/* ab8500 btemp driver interrupts and their respective isr */
+static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
+	{"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
+	{"BTEMP_LOW", ab8500_btemp_templow_handler},
+	{"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
+	{"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
+	{"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
+};
+
+static int __maybe_unused ab8500_btemp_resume(struct device *dev)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	ab8500_btemp_periodic(di, false);
+
+	return 0;
+}
+
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_fg",
+};
+
+static const struct power_supply_desc ab8500_btemp_desc = {
+	.name			= "ab8500_btemp",
+	.type			= POWER_SUPPLY_TYPE_UNKNOWN,
+	.properties		= ab8500_btemp_props,
+	.num_properties		= ARRAY_SIZE(ab8500_btemp_props),
+	.get_property		= ab8500_btemp_get_property,
+	.external_power_changed	= ab8500_btemp_external_power_changed,
+};
+
+static int ab8500_btemp_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for the btemp */
+	di->btemp_wq =
+		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
+	if (di->btemp_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Kick off periodic temperature measurements */
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static void ab8500_btemp_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->btemp_wq);
+}
+
+static const struct component_ops ab8500_btemp_component_ops = {
+	.bind = ab8500_btemp_bind,
+	.unbind = ab8500_btemp_unbind,
+};
+
+static int ab8500_btemp_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = &pdev->dev;
+	struct ab8500_btemp *di;
+	int irq, i, ret = 0;
+	u8 val;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	/* get parent data */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	/* Get thermal zone and ADC */
+	di->tz = thermal_zone_get_zone_by_name("battery-thermal");
+	if (IS_ERR(di->tz)) {
+		ret = PTR_ERR(di->tz);
+		/*
+		 * This usually just means we are probing before the thermal
+		 * zone, so just defer.
+		 */
+		if (ret == -ENODEV)
+			ret = -EPROBE_DEFER;
+		return dev_err_probe(dev, ret,
+				     "failed to get battery thermal zone\n");
+	}
+	di->bat_ctrl = devm_iio_channel_get(dev, "bat_ctrl");
+	if (IS_ERR(di->bat_ctrl)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->bat_ctrl),
+				    "failed to get BAT CTRL ADC channel\n");
+		return ret;
+	}
+
+	di->initialized = false;
+
+	psy_cfg.supplied_to = supply_interface;
+	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	psy_cfg.drv_data = di;
+
+	/* Init work for measuring temperature periodically */
+	INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
+		ab8500_btemp_periodic_work);
+
+	/* Set BTEMP thermal limits. Low and Med are fixed */
+	di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
+	di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
+
+	ret = abx500_get_register_interruptible(dev, AB8500_CHARGER,
+		AB8500_BTEMP_HIGH_TH, &val);
+	if (ret < 0) {
+		dev_err(dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+	switch (val) {
+	case BTEMP_HIGH_TH_57_0:
+	case BTEMP_HIGH_TH_57_1:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_57;
+		break;
+	case BTEMP_HIGH_TH_52:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_52;
+		break;
+	case BTEMP_HIGH_TH_62:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_62;
+		break;
+	}
+
+	/* Register BTEMP power supply class */
+	di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
+						   &psy_cfg);
+	if (IS_ERR(di->btemp_psy)) {
+		dev_err(dev, "failed to register BTEMP psy\n");
+		return PTR_ERR(di->btemp_psy);
+	}
+
+	/* Register interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+		if (irq < 0)
+			return irq;
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+			ab8500_btemp_irq[i].isr,
+			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			ab8500_btemp_irq[i].name, di);
+
+		if (ret) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n"
+				, ab8500_btemp_irq[i].name, irq, ret);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_btemp_irq[i].name, irq, ret);
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	list_add_tail(&di->node, &ab8500_btemp_list);
+
+	return component_add(dev, &ab8500_btemp_component_ops);
+}
+
+static int ab8500_btemp_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &ab8500_btemp_component_ops);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
+
+static const struct of_device_id ab8500_btemp_match[] = {
+	{ .compatible = "stericsson,ab8500-btemp", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
+
+struct platform_driver ab8500_btemp_driver = {
+	.probe = ab8500_btemp_probe,
+	.remove = ab8500_btemp_remove,
+	.driver = {
+		.name = "ab8500-btemp",
+		.of_match_table = ab8500_btemp_match,
+		.pm = &ab8500_btemp_pm_ops,
+	},
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-btemp");
+MODULE_DESCRIPTION("AB8500 battery temperature driver");
diff --git a/drivers/power/supply/ab8500_chargalg.c b/drivers/power/supply/ab8500_chargalg.c
new file mode 100644
index 000000000..2205ea083
--- /dev/null
+++ b/drivers/power/supply/ab8500_chargalg.c
@@ -0,0 +1,1853 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Copyright (c) 2012 Sony Mobile Communications AB
+ *
+ * Charging algorithm driver for AB8500
+ *
+ * Authors:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ *	Author: Imre Sunyi <imre.sunyi@sonymobile.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/component.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/notifier.h>
+
+#include "ab8500-bm.h"
+#include "ab8500-chargalg.h"
+
+/* Watchdog kick interval */
+#define CHG_WD_INTERVAL			(6 * HZ)
+
+/* End-of-charge criteria counter */
+#define EOC_COND_CNT			10
+
+/* One hour expressed in seconds */
+#define ONE_HOUR_IN_SECONDS            3600
+
+/* Five minutes expressed in seconds */
+#define FIVE_MINUTES_IN_SECONDS        300
+
+/*
+ * This is the battery capacity limit that will trigger a new
+ * full charging cycle in the case where maintenance charging
+ * has been disabled
+ */
+#define AB8500_RECHARGE_CAP		95
+
+enum ab8500_chargers {
+	NO_CHG,
+	AC_CHG,
+	USB_CHG,
+};
+
+struct ab8500_chargalg_charger_info {
+	enum ab8500_chargers conn_chg;
+	enum ab8500_chargers prev_conn_chg;
+	enum ab8500_chargers online_chg;
+	enum ab8500_chargers prev_online_chg;
+	enum ab8500_chargers charger_type;
+	bool usb_chg_ok;
+	bool ac_chg_ok;
+	int usb_volt_uv;
+	int usb_curr_ua;
+	int ac_volt_uv;
+	int ac_curr_ua;
+	int usb_vset_uv;
+	int usb_iset_ua;
+	int ac_vset_uv;
+	int ac_iset_ua;
+};
+
+struct ab8500_chargalg_battery_data {
+	int temp;
+	int volt_uv;
+	int avg_curr_ua;
+	int inst_curr_ua;
+	int percent;
+};
+
+enum ab8500_chargalg_states {
+	STATE_HANDHELD_INIT,
+	STATE_HANDHELD,
+	STATE_CHG_NOT_OK_INIT,
+	STATE_CHG_NOT_OK,
+	STATE_HW_TEMP_PROTECT_INIT,
+	STATE_HW_TEMP_PROTECT,
+	STATE_NORMAL_INIT,
+	STATE_NORMAL,
+	STATE_WAIT_FOR_RECHARGE_INIT,
+	STATE_WAIT_FOR_RECHARGE,
+	STATE_MAINTENANCE_A_INIT,
+	STATE_MAINTENANCE_A,
+	STATE_MAINTENANCE_B_INIT,
+	STATE_MAINTENANCE_B,
+	STATE_TEMP_UNDEROVER_INIT,
+	STATE_TEMP_UNDEROVER,
+	STATE_TEMP_LOWHIGH_INIT,
+	STATE_TEMP_LOWHIGH,
+	STATE_OVV_PROTECT_INIT,
+	STATE_OVV_PROTECT,
+	STATE_SAFETY_TIMER_EXPIRED_INIT,
+	STATE_SAFETY_TIMER_EXPIRED,
+	STATE_BATT_REMOVED_INIT,
+	STATE_BATT_REMOVED,
+	STATE_WD_EXPIRED_INIT,
+	STATE_WD_EXPIRED,
+};
+
+static const char * const states[] = {
+	"HANDHELD_INIT",
+	"HANDHELD",
+	"CHG_NOT_OK_INIT",
+	"CHG_NOT_OK",
+	"HW_TEMP_PROTECT_INIT",
+	"HW_TEMP_PROTECT",
+	"NORMAL_INIT",
+	"NORMAL",
+	"WAIT_FOR_RECHARGE_INIT",
+	"WAIT_FOR_RECHARGE",
+	"MAINTENANCE_A_INIT",
+	"MAINTENANCE_A",
+	"MAINTENANCE_B_INIT",
+	"MAINTENANCE_B",
+	"TEMP_UNDEROVER_INIT",
+	"TEMP_UNDEROVER",
+	"TEMP_LOWHIGH_INIT",
+	"TEMP_LOWHIGH",
+	"OVV_PROTECT_INIT",
+	"OVV_PROTECT",
+	"SAFETY_TIMER_EXPIRED_INIT",
+	"SAFETY_TIMER_EXPIRED",
+	"BATT_REMOVED_INIT",
+	"BATT_REMOVED",
+	"WD_EXPIRED_INIT",
+	"WD_EXPIRED",
+};
+
+struct ab8500_chargalg_events {
+	bool batt_unknown;
+	bool mainextchnotok;
+	bool batt_ovv;
+	bool batt_rem;
+	bool btemp_underover;
+	bool btemp_low;
+	bool btemp_high;
+	bool main_thermal_prot;
+	bool usb_thermal_prot;
+	bool main_ovv;
+	bool vbus_ovv;
+	bool usbchargernotok;
+	bool safety_timer_expired;
+	bool maintenance_timer_expired;
+	bool ac_wd_expired;
+	bool usb_wd_expired;
+	bool ac_cv_active;
+	bool usb_cv_active;
+	bool vbus_collapsed;
+};
+
+/**
+ * struct ab8500_charge_curr_maximization - Charger maximization parameters
+ * @original_iset_ua:	the non optimized/maximised charger current
+ * @current_iset_ua:	the charging current used at this moment
+ * @condition_cnt:	number of iterations needed before a new charger current
+			is set
+ * @max_current_ua:	maximum charger current
+ * @wait_cnt:		to avoid too fast current step down in case of charger
+ *			voltage collapse, we insert this delay between step
+ *			down
+ * @level:		tells in how many steps the charging current has been
+			increased
+ */
+struct ab8500_charge_curr_maximization {
+	int original_iset_ua;
+	int current_iset_ua;
+	int condition_cnt;
+	int max_current_ua;
+	int wait_cnt;
+	u8 level;
+};
+
+enum maxim_ret {
+	MAXIM_RET_NOACTION,
+	MAXIM_RET_CHANGE,
+	MAXIM_RET_IBAT_TOO_HIGH,
+};
+
+/**
+ * struct ab8500_chargalg - ab8500 Charging algorithm device information
+ * @dev:		pointer to the structure device
+ * @charge_status:	battery operating status
+ * @eoc_cnt:		counter used to determine end-of_charge
+ * @maintenance_chg:	indicate if maintenance charge is active
+ * @t_hyst_norm		temperature hysteresis when the temperature has been
+ *			over or under normal limits
+ * @t_hyst_lowhigh	temperature hysteresis when the temperature has been
+ *			over or under the high or low limits
+ * @charge_state:	current state of the charging algorithm
+ * @ccm			charging current maximization parameters
+ * @chg_info:		information about connected charger types
+ * @batt_data:		data of the battery
+ * @bm:           	Platform specific battery management information
+ * @parent:		pointer to the struct ab8500
+ * @chargalg_psy:	structure that holds the battery properties exposed by
+ *			the charging algorithm
+ * @events:		structure for information about events triggered
+ * @chargalg_wq:		work queue for running the charging algorithm
+ * @chargalg_periodic_work:	work to run the charging algorithm periodically
+ * @chargalg_wd_work:		work to kick the charger watchdog periodically
+ * @chargalg_work:		work to run the charging algorithm instantly
+ * @safety_timer:		charging safety timer
+ * @maintenance_timer:		maintenance charging timer
+ * @chargalg_kobject:		structure of type kobject
+ */
+struct ab8500_chargalg {
+	struct device *dev;
+	int charge_status;
+	int eoc_cnt;
+	bool maintenance_chg;
+	int t_hyst_norm;
+	int t_hyst_lowhigh;
+	enum ab8500_chargalg_states charge_state;
+	struct ab8500_charge_curr_maximization ccm;
+	struct ab8500_chargalg_charger_info chg_info;
+	struct ab8500_chargalg_battery_data batt_data;
+	struct ab8500 *parent;
+	struct ab8500_bm_data *bm;
+	struct power_supply *chargalg_psy;
+	struct ux500_charger *ac_chg;
+	struct ux500_charger *usb_chg;
+	struct ab8500_chargalg_events events;
+	struct workqueue_struct *chargalg_wq;
+	struct delayed_work chargalg_periodic_work;
+	struct delayed_work chargalg_wd_work;
+	struct work_struct chargalg_work;
+	struct hrtimer safety_timer;
+	struct hrtimer maintenance_timer;
+	struct kobject chargalg_kobject;
+};
+
+/* Main battery properties */
+static enum power_supply_property ab8500_chargalg_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
+/**
+ * ab8500_chargalg_safety_timer_expired() - Expiration of the safety timer
+ * @timer:     pointer to the hrtimer structure
+ *
+ * This function gets called when the safety timer for the charger
+ * expires
+ */
+static enum hrtimer_restart
+ab8500_chargalg_safety_timer_expired(struct hrtimer *timer)
+{
+	struct ab8500_chargalg *di = container_of(timer, struct ab8500_chargalg,
+						  safety_timer);
+	dev_err(di->dev, "Safety timer expired\n");
+	di->events.safety_timer_expired = true;
+
+	/* Trigger execution of the algorithm instantly */
+	queue_work(di->chargalg_wq, &di->chargalg_work);
+
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * ab8500_chargalg_maintenance_timer_expired() - Expiration of
+ * the maintenance timer
+ * @timer:     pointer to the timer structure
+ *
+ * This function gets called when the maintenance timer
+ * expires
+ */
+static enum hrtimer_restart
+ab8500_chargalg_maintenance_timer_expired(struct hrtimer *timer)
+{
+
+	struct ab8500_chargalg *di = container_of(timer, struct ab8500_chargalg,
+						  maintenance_timer);
+
+	dev_dbg(di->dev, "Maintenance timer expired\n");
+	di->events.maintenance_timer_expired = true;
+
+	/* Trigger execution of the algorithm instantly */
+	queue_work(di->chargalg_wq, &di->chargalg_work);
+
+	return HRTIMER_NORESTART;
+}
+
+/**
+ * ab8500_chargalg_state_to() - Change charge state
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * This function gets called when a charge state change should occur
+ */
+static void ab8500_chargalg_state_to(struct ab8500_chargalg *di,
+	enum ab8500_chargalg_states state)
+{
+	dev_dbg(di->dev,
+		"State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
+		di->charge_state == state ? "NO" : "YES",
+		di->charge_state,
+		states[di->charge_state],
+		state,
+		states[state]);
+
+	di->charge_state = state;
+}
+
+static int ab8500_chargalg_check_charger_enable(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	switch (di->charge_state) {
+	case STATE_NORMAL:
+	case STATE_MAINTENANCE_A:
+	case STATE_MAINTENANCE_B:
+		break;
+	default:
+		return 0;
+	}
+
+	if (di->chg_info.charger_type & USB_CHG) {
+		return di->usb_chg->ops.check_enable(di->usb_chg,
+			bi->constant_charge_voltage_max_uv,
+			bi->constant_charge_current_max_ua);
+	} else if (di->chg_info.charger_type & AC_CHG) {
+		return di->ac_chg->ops.check_enable(di->ac_chg,
+			bi->constant_charge_voltage_max_uv,
+			bi->constant_charge_current_max_ua);
+	}
+	return 0;
+}
+
+/**
+ * ab8500_chargalg_check_charger_connection() - Check charger connection change
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * This function will check if there is a change in the charger connection
+ * and change charge state accordingly. AC has precedence over USB.
+ */
+static int ab8500_chargalg_check_charger_connection(struct ab8500_chargalg *di)
+{
+	if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg) {
+		/* Charger state changed since last update */
+		if (di->chg_info.conn_chg & AC_CHG) {
+			dev_info(di->dev, "Charging source is AC\n");
+			if (di->chg_info.charger_type != AC_CHG) {
+				di->chg_info.charger_type = AC_CHG;
+				ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			}
+		} else if (di->chg_info.conn_chg & USB_CHG) {
+			dev_info(di->dev, "Charging source is USB\n");
+			di->chg_info.charger_type = USB_CHG;
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		} else {
+			dev_dbg(di->dev, "Charging source is OFF\n");
+			di->chg_info.charger_type = NO_CHG;
+			ab8500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+		}
+		di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
+	}
+	return di->chg_info.conn_chg;
+}
+
+/**
+ * ab8500_chargalg_start_safety_timer() - Start charging safety timer
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * The safety timer is used to avoid overcharging of old or bad batteries.
+ * There are different timers for AC and USB
+ */
+static void ab8500_chargalg_start_safety_timer(struct ab8500_chargalg *di)
+{
+	/* Charger-dependent expiration time in hours*/
+	int timer_expiration = 0;
+
+	switch (di->chg_info.charger_type) {
+	case AC_CHG:
+		timer_expiration = di->bm->main_safety_tmr_h;
+		break;
+
+	case USB_CHG:
+		timer_expiration = di->bm->usb_safety_tmr_h;
+		break;
+
+	default:
+		dev_err(di->dev, "Unknown charger to charge from\n");
+		break;
+	}
+
+	di->events.safety_timer_expired = false;
+	hrtimer_set_expires_range(&di->safety_timer,
+		ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0),
+		ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+	hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * ab8500_chargalg_stop_safety_timer() - Stop charging safety timer
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * The safety timer is stopped whenever the NORMAL state is exited
+ */
+static void ab8500_chargalg_stop_safety_timer(struct ab8500_chargalg *di)
+{
+	if (hrtimer_try_to_cancel(&di->safety_timer) >= 0)
+		di->events.safety_timer_expired = false;
+}
+
+/**
+ * ab8500_chargalg_start_maintenance_timer() - Start charging maintenance timer
+ * @di:		pointer to the ab8500_chargalg structure
+ * @duration:	duration of the maintenance timer in minutes
+ *
+ * The maintenance timer is used to maintain the charge in the battery once
+ * the battery is considered full. These timers are chosen to match the
+ * discharge curve of the battery
+ */
+static void ab8500_chargalg_start_maintenance_timer(struct ab8500_chargalg *di,
+	int duration)
+{
+	/* Set a timer in minutes with a 30 second range */
+	hrtimer_set_expires_range(&di->maintenance_timer,
+		ktime_set(duration * 60, 0),
+		ktime_set(30, 0));
+	di->events.maintenance_timer_expired = false;
+	hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * ab8500_chargalg_stop_maintenance_timer() - Stop maintenance timer
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * The maintenance timer is stopped whenever maintenance ends or when another
+ * state is entered
+ */
+static void ab8500_chargalg_stop_maintenance_timer(struct ab8500_chargalg *di)
+{
+	if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0)
+		di->events.maintenance_timer_expired = false;
+}
+
+/**
+ * ab8500_chargalg_kick_watchdog() - Kick charger watchdog
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * The charger watchdog have to be kicked periodically whenever the charger is
+ * on, else the ABB will reset the system
+ */
+static int ab8500_chargalg_kick_watchdog(struct ab8500_chargalg *di)
+{
+	/* Check if charger exists and kick watchdog if charging */
+	if (di->ac_chg && di->ac_chg->ops.kick_wd &&
+	    di->chg_info.online_chg & AC_CHG) {
+		return di->ac_chg->ops.kick_wd(di->ac_chg);
+	} else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
+			di->chg_info.online_chg & USB_CHG)
+		return di->usb_chg->ops.kick_wd(di->usb_chg);
+
+	return -ENXIO;
+}
+
+/**
+ * ab8500_chargalg_ac_en() - Turn on/off the AC charger
+ * @di:		pointer to the ab8500_chargalg structure
+ * @enable:	charger on/off
+ * @vset_uv:	requested charger output voltage in microvolt
+ * @iset_ua:	requested charger output current in microampere
+ *
+ * The AC charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int ab8500_chargalg_ac_en(struct ab8500_chargalg *di, int enable,
+	int vset_uv, int iset_ua)
+{
+	if (!di->ac_chg || !di->ac_chg->ops.enable)
+		return -ENXIO;
+
+	/* Select maximum of what both the charger and the battery supports */
+	if (di->ac_chg->max_out_volt_uv)
+		vset_uv = min(vset_uv, di->ac_chg->max_out_volt_uv);
+	if (di->ac_chg->max_out_curr_ua)
+		iset_ua = min(iset_ua, di->ac_chg->max_out_curr_ua);
+
+	di->chg_info.ac_iset_ua = iset_ua;
+	di->chg_info.ac_vset_uv = vset_uv;
+
+	return di->ac_chg->ops.enable(di->ac_chg, enable, vset_uv, iset_ua);
+}
+
+/**
+ * ab8500_chargalg_usb_en() - Turn on/off the USB charger
+ * @di:		pointer to the ab8500_chargalg structure
+ * @enable:	charger on/off
+ * @vset_uv:	requested charger output voltage in microvolt
+ * @iset_ua:	requested charger output current in microampere
+ *
+ * The USB charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int ab8500_chargalg_usb_en(struct ab8500_chargalg *di, int enable,
+	int vset_uv, int iset_ua)
+{
+	if (!di->usb_chg || !di->usb_chg->ops.enable)
+		return -ENXIO;
+
+	/* Select maximum of what both the charger and the battery supports */
+	if (di->usb_chg->max_out_volt_uv)
+		vset_uv = min(vset_uv, di->usb_chg->max_out_volt_uv);
+	if (di->usb_chg->max_out_curr_ua)
+		iset_ua = min(iset_ua, di->usb_chg->max_out_curr_ua);
+
+	di->chg_info.usb_iset_ua = iset_ua;
+	di->chg_info.usb_vset_uv = vset_uv;
+
+	return di->usb_chg->ops.enable(di->usb_chg, enable, vset_uv, iset_ua);
+}
+
+/**
+ * ab8500_chargalg_update_chg_curr() - Update charger current
+ * @di:		pointer to the ab8500_chargalg structure
+ * @iset_ua:	requested charger output current in microampere
+ *
+ * The charger output current will be updated for the charger
+ * that is currently in use
+ */
+static int ab8500_chargalg_update_chg_curr(struct ab8500_chargalg *di,
+		int iset_ua)
+{
+	/* Check if charger exists and update current if charging */
+	if (di->ac_chg && di->ac_chg->ops.update_curr &&
+			di->chg_info.charger_type & AC_CHG) {
+		/*
+		 * Select maximum of what both the charger
+		 * and the battery supports
+		 */
+		if (di->ac_chg->max_out_curr_ua)
+			iset_ua = min(iset_ua, di->ac_chg->max_out_curr_ua);
+
+		di->chg_info.ac_iset_ua = iset_ua;
+
+		return di->ac_chg->ops.update_curr(di->ac_chg, iset_ua);
+	} else if (di->usb_chg && di->usb_chg->ops.update_curr &&
+			di->chg_info.charger_type & USB_CHG) {
+		/*
+		 * Select maximum of what both the charger
+		 * and the battery supports
+		 */
+		if (di->usb_chg->max_out_curr_ua)
+			iset_ua = min(iset_ua, di->usb_chg->max_out_curr_ua);
+
+		di->chg_info.usb_iset_ua = iset_ua;
+
+		return di->usb_chg->ops.update_curr(di->usb_chg, iset_ua);
+	}
+
+	return -ENXIO;
+}
+
+/**
+ * ab8500_chargalg_stop_charging() - Stop charging
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * This function is called from any state where charging should be stopped.
+ * All charging is disabled and all status parameters and timers are changed
+ * accordingly
+ */
+static void ab8500_chargalg_stop_charging(struct ab8500_chargalg *di)
+{
+	ab8500_chargalg_ac_en(di, false, 0, 0);
+	ab8500_chargalg_usb_en(di, false, 0, 0);
+	ab8500_chargalg_stop_safety_timer(di);
+	ab8500_chargalg_stop_maintenance_timer(di);
+	di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	di->maintenance_chg = false;
+	cancel_delayed_work(&di->chargalg_wd_work);
+	power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * ab8500_chargalg_hold_charging() - Pauses charging
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * This function is called in the case where maintenance charging has been
+ * disabled and instead a battery voltage mode is entered to check when the
+ * battery voltage has reached a certain recharge voltage
+ */
+static void ab8500_chargalg_hold_charging(struct ab8500_chargalg *di)
+{
+	ab8500_chargalg_ac_en(di, false, 0, 0);
+	ab8500_chargalg_usb_en(di, false, 0, 0);
+	ab8500_chargalg_stop_safety_timer(di);
+	ab8500_chargalg_stop_maintenance_timer(di);
+	di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+	di->maintenance_chg = false;
+	cancel_delayed_work(&di->chargalg_wd_work);
+	power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * ab8500_chargalg_start_charging() - Start the charger
+ * @di:		pointer to the ab8500_chargalg structure
+ * @vset_uv:	requested charger output voltage in microvolt
+ * @iset_ua:	requested charger output current in microampere
+ *
+ * A charger will be enabled depending on the requested charger type that was
+ * detected previously.
+ */
+static void ab8500_chargalg_start_charging(struct ab8500_chargalg *di,
+	int vset_uv, int iset_ua)
+{
+	switch (di->chg_info.charger_type) {
+	case AC_CHG:
+		dev_dbg(di->dev,
+			"AC parameters: Vset %d, Ich %d\n", vset_uv, iset_ua);
+		ab8500_chargalg_usb_en(di, false, 0, 0);
+		ab8500_chargalg_ac_en(di, true, vset_uv, iset_ua);
+		break;
+
+	case USB_CHG:
+		dev_dbg(di->dev,
+			"USB parameters: Vset %d, Ich %d\n", vset_uv, iset_ua);
+		ab8500_chargalg_ac_en(di, false, 0, 0);
+		ab8500_chargalg_usb_en(di, true, vset_uv, iset_ua);
+		break;
+
+	default:
+		dev_err(di->dev, "Unknown charger to charge from\n");
+		break;
+	}
+}
+
+/**
+ * ab8500_chargalg_check_temp() - Check battery temperature ranges
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * The battery temperature is checked against the predefined limits and the
+ * charge state is changed accordingly
+ */
+static void ab8500_chargalg_check_temp(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	if (di->batt_data.temp > (bi->temp_alert_min + di->t_hyst_norm) &&
+		di->batt_data.temp < (bi->temp_alert_max - di->t_hyst_norm)) {
+		/* Temp OK! */
+		di->events.btemp_underover = false;
+		di->events.btemp_low = false;
+		di->events.btemp_high = false;
+		di->t_hyst_norm = 0;
+		di->t_hyst_lowhigh = 0;
+	} else {
+		if ((di->batt_data.temp >= bi->temp_alert_max) &&
+		    (di->batt_data.temp < (bi->temp_max - di->t_hyst_lowhigh))) {
+			/* Alert zone for high temperature */
+			di->events.btemp_underover = false;
+			di->events.btemp_high = true;
+			di->t_hyst_norm = di->bm->temp_hysteresis;
+			di->t_hyst_lowhigh = 0;
+		} else if ((di->batt_data.temp > (bi->temp_min + di->t_hyst_lowhigh)) &&
+			   (di->batt_data.temp <= bi->temp_alert_min)) {
+			/* Alert zone for low temperature */
+			di->events.btemp_underover = false;
+			di->events.btemp_low = true;
+			di->t_hyst_norm = di->bm->temp_hysteresis;
+			di->t_hyst_lowhigh = 0;
+		} else if (di->batt_data.temp <= bi->temp_min ||
+			di->batt_data.temp >= bi->temp_max) {
+			/* TEMP major!!!!! */
+			di->events.btemp_underover = true;
+			di->events.btemp_low = false;
+			di->events.btemp_high = false;
+			di->t_hyst_norm = 0;
+			di->t_hyst_lowhigh = di->bm->temp_hysteresis;
+		} else {
+			/* Within hysteresis */
+			dev_dbg(di->dev, "Within hysteresis limit temp: %d "
+				"hyst_lowhigh %d, hyst normal %d\n",
+				di->batt_data.temp, di->t_hyst_lowhigh,
+				di->t_hyst_norm);
+		}
+	}
+}
+
+/**
+ * ab8500_chargalg_check_charger_voltage() - Check charger voltage
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * Charger voltage is checked against maximum limit
+ */
+static void ab8500_chargalg_check_charger_voltage(struct ab8500_chargalg *di)
+{
+	if (di->chg_info.usb_volt_uv > di->bm->chg_params->usb_volt_max_uv)
+		di->chg_info.usb_chg_ok = false;
+	else
+		di->chg_info.usb_chg_ok = true;
+
+	if (di->chg_info.ac_volt_uv > di->bm->chg_params->ac_volt_max_uv)
+		di->chg_info.ac_chg_ok = false;
+	else
+		di->chg_info.ac_chg_ok = true;
+
+}
+
+/**
+ * ab8500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * End-of-charge criteria is fulfilled when the battery voltage is above a
+ * certain limit and the battery current is below a certain limit for a
+ * predefined number of consecutive seconds. If true, the battery is full
+ */
+static void ab8500_chargalg_end_of_charge(struct ab8500_chargalg *di)
+{
+	if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
+		di->charge_state == STATE_NORMAL &&
+		!di->maintenance_chg && (di->batt_data.volt_uv >=
+		di->bm->bi->voltage_max_design_uv ||
+		di->events.usb_cv_active || di->events.ac_cv_active) &&
+		di->batt_data.avg_curr_ua <
+		di->bm->bi->charge_term_current_ua &&
+		di->batt_data.avg_curr_ua > 0) {
+		if (++di->eoc_cnt >= EOC_COND_CNT) {
+			di->eoc_cnt = 0;
+			di->charge_status = POWER_SUPPLY_STATUS_FULL;
+			di->maintenance_chg = true;
+			dev_dbg(di->dev, "EOC reached!\n");
+			power_supply_changed(di->chargalg_psy);
+		} else {
+			dev_dbg(di->dev,
+				" EOC limit reached for the %d"
+				" time, out of %d before EOC\n",
+				di->eoc_cnt,
+				EOC_COND_CNT);
+		}
+	} else {
+		di->eoc_cnt = 0;
+	}
+}
+
+static void init_maxim_chg_curr(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	di->ccm.original_iset_ua = bi->constant_charge_current_max_ua;
+	di->ccm.current_iset_ua = bi->constant_charge_current_max_ua;
+	di->ccm.max_current_ua = di->bm->maxi->chg_curr_ua;
+	di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+	di->ccm.level = 0;
+}
+
+/**
+ * ab8500_chargalg_chg_curr_maxim - increases the charger current to
+ *			compensate for the system load
+ * @di		pointer to the ab8500_chargalg structure
+ *
+ * This maximization function is used to raise the charger current to get the
+ * battery current as close to the optimal value as possible. The battery
+ * current during charging is affected by the system load
+ */
+static enum maxim_ret ab8500_chargalg_chg_curr_maxim(struct ab8500_chargalg *di)
+{
+
+	if (!di->bm->maxi->ena_maxi)
+		return MAXIM_RET_NOACTION;
+
+	if (di->events.vbus_collapsed) {
+		dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
+				di->ccm.wait_cnt);
+		if (di->ccm.wait_cnt == 0) {
+			dev_dbg(di->dev, "lowering current\n");
+			di->ccm.wait_cnt++;
+			di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+			di->ccm.max_current_ua = di->ccm.current_iset_ua;
+			di->ccm.current_iset_ua = di->ccm.max_current_ua;
+			di->ccm.level--;
+			return MAXIM_RET_CHANGE;
+		} else {
+			dev_dbg(di->dev, "waiting\n");
+			/* Let's go in here twice before lowering curr again */
+			di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
+			return MAXIM_RET_NOACTION;
+		}
+	}
+
+	di->ccm.wait_cnt = 0;
+
+	if (di->batt_data.inst_curr_ua > di->ccm.original_iset_ua) {
+		dev_dbg(di->dev, " Maximization Ibat (%duA) too high"
+			" (limit %duA) (current iset: %duA)!\n",
+			di->batt_data.inst_curr_ua, di->ccm.original_iset_ua,
+			di->ccm.current_iset_ua);
+
+		if (di->ccm.current_iset_ua == di->ccm.original_iset_ua)
+			return MAXIM_RET_NOACTION;
+
+		di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+		di->ccm.current_iset_ua = di->ccm.original_iset_ua;
+		di->ccm.level = 0;
+
+		return MAXIM_RET_IBAT_TOO_HIGH;
+	}
+
+	di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+	return MAXIM_RET_NOACTION;
+}
+
+static void handle_maxim_chg_curr(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	enum maxim_ret ret;
+	int result;
+
+	ret = ab8500_chargalg_chg_curr_maxim(di);
+	switch (ret) {
+	case MAXIM_RET_CHANGE:
+		result = ab8500_chargalg_update_chg_curr(di,
+			di->ccm.current_iset_ua);
+		if (result)
+			dev_err(di->dev, "failed to set chg curr\n");
+		break;
+	case MAXIM_RET_IBAT_TOO_HIGH:
+		result = ab8500_chargalg_update_chg_curr(di,
+			bi->constant_charge_current_max_ua);
+		if (result)
+			dev_err(di->dev, "failed to set chg curr\n");
+		break;
+
+	case MAXIM_RET_NOACTION:
+	default:
+		/* Do nothing..*/
+		break;
+	}
+}
+
+static int ab8500_chargalg_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_chargalg *di;
+	union power_supply_propval ret;
+	int j;
+	bool capacity_updated = false;
+
+	psy = (struct power_supply *)data;
+	di = power_supply_get_drvdata(psy);
+	/* For all psy where the driver name appears in any supplied_to */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/*
+	 *  If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its
+	 * property because of handling that sysfs entry on its own, this is
+	 * the place to get the battery capacity.
+	 */
+	if (!power_supply_get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) {
+		di->batt_data.percent = ret.intval;
+		capacity_updated = true;
+	}
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		/*
+		 * Initialize chargers if not already done.
+		 * The ab8500_charger*/
+		if (!di->ac_chg &&
+			ext->desc->type == POWER_SUPPLY_TYPE_MAINS)
+			di->ac_chg = psy_to_ux500_charger(ext);
+		else if (!di->usb_chg &&
+			ext->desc->type == POWER_SUPPLY_TYPE_USB)
+			di->usb_chg = psy_to_ux500_charger(ext);
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+		switch (prop) {
+		case POWER_SUPPLY_PROP_PRESENT:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				/* Battery present */
+				if (ret.intval)
+					di->events.batt_rem = false;
+				/* Battery removed */
+				else
+					di->events.batt_rem = true;
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC disconnected */
+				if (!ret.intval &&
+					(di->chg_info.conn_chg & AC_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg &= ~AC_CHG;
+				}
+				/* AC connected */
+				else if (ret.intval &&
+					!(di->chg_info.conn_chg & AC_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg |= AC_CHG;
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB disconnected */
+				if (!ret.intval &&
+					(di->chg_info.conn_chg & USB_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg &= ~USB_CHG;
+				}
+				/* USB connected */
+				else if (ret.intval &&
+					!(di->chg_info.conn_chg & USB_CHG)) {
+					di->chg_info.prev_conn_chg =
+						di->chg_info.conn_chg;
+					di->chg_info.conn_chg |= USB_CHG;
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_ONLINE:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC offline */
+				if (!ret.intval &&
+					(di->chg_info.online_chg & AC_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg &= ~AC_CHG;
+				}
+				/* AC online */
+				else if (ret.intval &&
+					!(di->chg_info.online_chg & AC_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg |= AC_CHG;
+					queue_delayed_work(di->chargalg_wq,
+						&di->chargalg_wd_work, 0);
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB offline */
+				if (!ret.intval &&
+					(di->chg_info.online_chg & USB_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg &= ~USB_CHG;
+				}
+				/* USB online */
+				else if (ret.intval &&
+					!(di->chg_info.online_chg & USB_CHG)) {
+					di->chg_info.prev_online_chg =
+						di->chg_info.online_chg;
+					di->chg_info.online_chg |= USB_CHG;
+					queue_delayed_work(di->chargalg_wq,
+						&di->chargalg_wd_work, 0);
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_HEALTH:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				switch (ret.intval) {
+				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+					di->events.mainextchnotok = true;
+					di->events.main_thermal_prot = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_DEAD:
+					di->events.ac_wd_expired = true;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.main_thermal_prot = false;
+					break;
+				case POWER_SUPPLY_HEALTH_COLD:
+				case POWER_SUPPLY_HEALTH_OVERHEAT:
+					di->events.main_thermal_prot = true;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+					di->events.main_ovv = true;
+					di->events.mainextchnotok = false;
+					di->events.main_thermal_prot = false;
+					di->events.ac_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_GOOD:
+					di->events.main_thermal_prot = false;
+					di->events.mainextchnotok = false;
+					di->events.main_ovv = false;
+					di->events.ac_wd_expired = false;
+					break;
+				default:
+					break;
+				}
+				break;
+
+			case POWER_SUPPLY_TYPE_USB:
+				switch (ret.intval) {
+				case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+					di->events.usbchargernotok = true;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_DEAD:
+					di->events.usb_wd_expired = true;
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					break;
+				case POWER_SUPPLY_HEALTH_COLD:
+				case POWER_SUPPLY_HEALTH_OVERHEAT:
+					di->events.usb_thermal_prot = true;
+					di->events.usbchargernotok = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+					di->events.vbus_ovv = true;
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.usb_wd_expired = false;
+					break;
+				case POWER_SUPPLY_HEALTH_GOOD:
+					di->events.usbchargernotok = false;
+					di->events.usb_thermal_prot = false;
+					di->events.vbus_ovv = false;
+					di->events.usb_wd_expired = false;
+					break;
+				default:
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.volt_uv = ret.intval;
+				break;
+			case POWER_SUPPLY_TYPE_MAINS:
+				di->chg_info.ac_volt_uv = ret.intval;
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				di->chg_info.usb_volt_uv = ret.intval;
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AVG is used to indicate when we are
+				 * in CV mode */
+				if (ret.intval)
+					di->events.ac_cv_active = true;
+				else
+					di->events.ac_cv_active = false;
+
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* AVG is used to indicate when we are
+				 * in CV mode */
+				if (ret.intval)
+					di->events.usb_cv_active = true;
+				else
+					di->events.usb_cv_active = false;
+
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_TECHNOLOGY:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (ret.intval)
+					di->events.batt_unknown = false;
+				else
+					di->events.batt_unknown = true;
+
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_TEMP:
+			di->batt_data.temp = ret.intval / 10;
+			break;
+
+		case POWER_SUPPLY_PROP_CURRENT_NOW:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+				di->chg_info.ac_curr_ua = ret.intval;
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				di->chg_info.usb_curr_ua = ret.intval;
+				break;
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.inst_curr_ua = ret.intval;
+				break;
+			default:
+				break;
+			}
+			break;
+
+		case POWER_SUPPLY_PROP_CURRENT_AVG:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->batt_data.avg_curr_ua = ret.intval;
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				if (ret.intval)
+					di->events.vbus_collapsed = true;
+				else
+					di->events.vbus_collapsed = false;
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_CAPACITY:
+			if (!capacity_updated)
+				di->batt_data.percent = ret.intval;
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_chargalg_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void ab8500_chargalg_external_power_changed(struct power_supply *psy)
+{
+	struct ab8500_chargalg *di = power_supply_get_drvdata(psy);
+
+	/*
+	 * Trigger execution of the algorithm instantly and read
+	 * all power_supply properties there instead
+	 */
+	if (di->chargalg_wq)
+		queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * ab8500_chargalg_time_to_restart() - time to restart CC/CV charging?
+ * @di: charging algorithm state
+ *
+ * This checks if the voltage or capacity of the battery has fallen so
+ * low that we need to restart the CC/CV charge cycle.
+ */
+static bool ab8500_chargalg_time_to_restart(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	/* Sanity check - these need to have some reasonable values */
+	if (!di->batt_data.volt_uv || !di->batt_data.percent)
+		return false;
+
+	/* Some batteries tell us at which voltage we should restart charging */
+	if (bi->charge_restart_voltage_uv > 0) {
+		if (di->batt_data.volt_uv <= bi->charge_restart_voltage_uv)
+			return true;
+		/* Else we restart as we reach a certain capacity */
+	} else {
+		if (di->batt_data.percent <= AB8500_RECHARGE_CAP)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * ab8500_chargalg_algorithm() - Main function for the algorithm
+ * @di:		pointer to the ab8500_chargalg structure
+ *
+ * This is the main control function for the charging algorithm.
+ * It is called periodically or when something happens that will
+ * trigger a state change
+ */
+static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	struct power_supply_maintenance_charge_table *mt;
+	int charger_status;
+	int ret;
+
+	/* Collect data from all power_supply class devices */
+	class_for_each_device(power_supply_class, NULL,
+		di->chargalg_psy, ab8500_chargalg_get_ext_psy_data);
+
+	ab8500_chargalg_end_of_charge(di);
+	ab8500_chargalg_check_temp(di);
+	ab8500_chargalg_check_charger_voltage(di);
+
+	charger_status = ab8500_chargalg_check_charger_connection(di);
+
+	if (is_ab8500(di->parent)) {
+		ret = ab8500_chargalg_check_charger_enable(di);
+		if (ret < 0)
+			dev_err(di->dev, "Checking charger is enabled error"
+					": Returned Value %d\n", ret);
+	}
+
+	/*
+	 * First check if we have a charger connected.
+	 * Also we don't allow charging of unknown batteries if configured
+	 * this way
+	 */
+	if (!charger_status ||
+		(di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
+		if (di->charge_state != STATE_HANDHELD) {
+			di->events.safety_timer_expired = false;
+			ab8500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+		}
+	}
+
+	/* Safety timer expiration */
+	else if (di->events.safety_timer_expired) {
+		if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
+			ab8500_chargalg_state_to(di,
+				STATE_SAFETY_TIMER_EXPIRED_INIT);
+	}
+	/*
+	 * Check if any interrupts has occurred
+	 * that will prevent us from charging
+	 */
+
+	/* Battery removed */
+	else if (di->events.batt_rem) {
+		if (di->charge_state != STATE_BATT_REMOVED)
+			ab8500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
+	}
+	/* Main or USB charger not ok. */
+	else if (di->events.mainextchnotok || di->events.usbchargernotok) {
+		/*
+		 * If vbus_collapsed is set, we have to lower the charger
+		 * current, which is done in the normal state below
+		 */
+		if (di->charge_state != STATE_CHG_NOT_OK &&
+				!di->events.vbus_collapsed)
+			ab8500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
+	}
+	/* VBUS, Main or VBAT OVV. */
+	else if (di->events.vbus_ovv ||
+			di->events.main_ovv ||
+			di->events.batt_ovv ||
+			!di->chg_info.usb_chg_ok ||
+			!di->chg_info.ac_chg_ok) {
+		if (di->charge_state != STATE_OVV_PROTECT)
+			ab8500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
+	}
+	/* USB Thermal, stop charging */
+	else if (di->events.main_thermal_prot ||
+		di->events.usb_thermal_prot) {
+		if (di->charge_state != STATE_HW_TEMP_PROTECT)
+			ab8500_chargalg_state_to(di,
+				STATE_HW_TEMP_PROTECT_INIT);
+	}
+	/* Battery temp over/under */
+	else if (di->events.btemp_underover) {
+		if (di->charge_state != STATE_TEMP_UNDEROVER)
+			ab8500_chargalg_state_to(di,
+				STATE_TEMP_UNDEROVER_INIT);
+	}
+	/* Watchdog expired */
+	else if (di->events.ac_wd_expired ||
+		di->events.usb_wd_expired) {
+		if (di->charge_state != STATE_WD_EXPIRED)
+			ab8500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
+	}
+	/* Battery temp high/low */
+	else if (di->events.btemp_low || di->events.btemp_high) {
+		if (di->charge_state != STATE_TEMP_LOWHIGH)
+			ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
+	}
+
+	dev_dbg(di->dev,
+		"[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
+		"State %s Active_chg %d Chg_status %d AC %d USB %d "
+		"AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
+		"USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
+		di->batt_data.volt_uv,
+		di->batt_data.avg_curr_ua,
+		di->batt_data.inst_curr_ua,
+		di->batt_data.temp,
+		di->batt_data.percent,
+		di->maintenance_chg,
+		states[di->charge_state],
+		di->chg_info.charger_type,
+		di->charge_status,
+		di->chg_info.conn_chg & AC_CHG,
+		di->chg_info.conn_chg & USB_CHG,
+		di->chg_info.online_chg & AC_CHG,
+		di->chg_info.online_chg & USB_CHG,
+		di->events.ac_cv_active,
+		di->events.usb_cv_active,
+		di->chg_info.ac_curr_ua,
+		di->chg_info.usb_curr_ua,
+		di->chg_info.ac_vset_uv,
+		di->chg_info.ac_iset_ua,
+		di->chg_info.usb_vset_uv,
+		di->chg_info.usb_iset_ua);
+
+	switch (di->charge_state) {
+	case STATE_HANDHELD_INIT:
+		ab8500_chargalg_stop_charging(di);
+		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+		ab8500_chargalg_state_to(di, STATE_HANDHELD);
+		fallthrough;
+
+	case STATE_HANDHELD:
+		break;
+
+	case STATE_BATT_REMOVED_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_BATT_REMOVED);
+		fallthrough;
+
+	case STATE_BATT_REMOVED:
+		if (!di->events.batt_rem)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_HW_TEMP_PROTECT_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
+		fallthrough;
+
+	case STATE_HW_TEMP_PROTECT:
+		if (!di->events.main_thermal_prot &&
+				!di->events.usb_thermal_prot)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_OVV_PROTECT_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_OVV_PROTECT);
+		fallthrough;
+
+	case STATE_OVV_PROTECT:
+		if (!di->events.vbus_ovv &&
+				!di->events.main_ovv &&
+				!di->events.batt_ovv &&
+				di->chg_info.usb_chg_ok &&
+				di->chg_info.ac_chg_ok)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_CHG_NOT_OK_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_CHG_NOT_OK);
+		fallthrough;
+
+	case STATE_CHG_NOT_OK:
+		if (!di->events.mainextchnotok &&
+				!di->events.usbchargernotok)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_SAFETY_TIMER_EXPIRED_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
+		fallthrough;
+
+	case STATE_SAFETY_TIMER_EXPIRED:
+		/* We exit this state when charger is removed */
+		break;
+
+	case STATE_NORMAL_INIT:
+		if (bi->constant_charge_current_max_ua == 0)
+			/* "charging" with 0 uA */
+			ab8500_chargalg_stop_charging(di);
+		else {
+			ab8500_chargalg_start_charging(di,
+				bi->constant_charge_voltage_max_uv,
+				bi->constant_charge_current_max_ua);
+		}
+
+		ab8500_chargalg_state_to(di, STATE_NORMAL);
+		ab8500_chargalg_start_safety_timer(di);
+		ab8500_chargalg_stop_maintenance_timer(di);
+		init_maxim_chg_curr(di);
+		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+		di->eoc_cnt = 0;
+		di->maintenance_chg = false;
+		power_supply_changed(di->chargalg_psy);
+
+		break;
+
+	case STATE_NORMAL:
+		handle_maxim_chg_curr(di);
+		if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
+			di->maintenance_chg) {
+			/*
+			 * The battery is fully charged, check if we support
+			 * maintenance charging else go back to waiting for
+			 * the recharge voltage limit.
+			 */
+			if (!power_supply_supports_maintenance_charging(bi))
+				ab8500_chargalg_state_to(di,
+					STATE_WAIT_FOR_RECHARGE_INIT);
+			else
+				ab8500_chargalg_state_to(di,
+					STATE_MAINTENANCE_A_INIT);
+		}
+		break;
+
+	/* This state will be used when the maintenance state is disabled */
+	case STATE_WAIT_FOR_RECHARGE_INIT:
+		ab8500_chargalg_hold_charging(di);
+		ab8500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
+		fallthrough;
+
+	case STATE_WAIT_FOR_RECHARGE:
+		if (ab8500_chargalg_time_to_restart(di))
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_MAINTENANCE_A_INIT:
+		mt = power_supply_get_maintenance_charging_setting(bi, 0);
+		if (!mt) {
+			/* No maintenance A state, go back to normal */
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			power_supply_changed(di->chargalg_psy);
+			break;
+		}
+		ab8500_chargalg_stop_safety_timer(di);
+		ab8500_chargalg_start_maintenance_timer(di,
+			mt->charge_safety_timer_minutes);
+		ab8500_chargalg_start_charging(di,
+			mt->charge_voltage_max_uv,
+			mt->charge_current_max_ua);
+		ab8500_chargalg_state_to(di, STATE_MAINTENANCE_A);
+		power_supply_changed(di->chargalg_psy);
+		fallthrough;
+
+	case STATE_MAINTENANCE_A:
+		if (di->events.maintenance_timer_expired) {
+			ab8500_chargalg_stop_maintenance_timer(di);
+			ab8500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
+		}
+		/*
+		 * This happens if the voltage drops too quickly during
+		 * maintenance charging, especially in older batteries.
+		 */
+		if (ab8500_chargalg_time_to_restart(di)) {
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			dev_info(di->dev, "restarted charging from maintenance state A - battery getting old?\n");
+		}
+		break;
+
+	case STATE_MAINTENANCE_B_INIT:
+		mt = power_supply_get_maintenance_charging_setting(bi, 1);
+		if (!mt) {
+			/* No maintenance B state, go back to normal */
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			power_supply_changed(di->chargalg_psy);
+			break;
+		}
+		ab8500_chargalg_start_maintenance_timer(di,
+			mt->charge_safety_timer_minutes);
+		ab8500_chargalg_start_charging(di,
+			mt->charge_voltage_max_uv,
+			mt->charge_current_max_ua);
+		ab8500_chargalg_state_to(di, STATE_MAINTENANCE_B);
+		power_supply_changed(di->chargalg_psy);
+		fallthrough;
+
+	case STATE_MAINTENANCE_B:
+		if (di->events.maintenance_timer_expired) {
+			ab8500_chargalg_stop_maintenance_timer(di);
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		}
+		/*
+		 * This happens if the voltage drops too quickly during
+		 * maintenance charging, especially in older batteries.
+		 */
+		if (ab8500_chargalg_time_to_restart(di)) {
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			dev_info(di->dev, "restarted charging from maintenance state B - battery getting old?\n");
+		}
+		break;
+
+	case STATE_TEMP_LOWHIGH_INIT:
+		if (di->events.btemp_low) {
+			ab8500_chargalg_start_charging(di,
+				       bi->alert_low_temp_charge_voltage_uv,
+				       bi->alert_low_temp_charge_current_ua);
+		} else if (di->events.btemp_high) {
+			ab8500_chargalg_start_charging(di,
+				       bi->alert_high_temp_charge_voltage_uv,
+				       bi->alert_high_temp_charge_current_ua);
+		} else {
+			dev_err(di->dev, "neither low or high temp event occurred\n");
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+			break;
+		}
+		ab8500_chargalg_stop_maintenance_timer(di);
+		di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+		ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
+		power_supply_changed(di->chargalg_psy);
+		fallthrough;
+
+	case STATE_TEMP_LOWHIGH:
+		if (!di->events.btemp_low && !di->events.btemp_high)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_WD_EXPIRED_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_WD_EXPIRED);
+		fallthrough;
+
+	case STATE_WD_EXPIRED:
+		if (!di->events.ac_wd_expired &&
+				!di->events.usb_wd_expired)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
+	case STATE_TEMP_UNDEROVER_INIT:
+		ab8500_chargalg_stop_charging(di);
+		ab8500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
+		fallthrough;
+
+	case STATE_TEMP_UNDEROVER:
+		if (!di->events.btemp_underover)
+			ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+	}
+
+	/* Start charging directly if the new state is a charge state */
+	if (di->charge_state == STATE_NORMAL_INIT ||
+			di->charge_state == STATE_MAINTENANCE_A_INIT ||
+			di->charge_state == STATE_MAINTENANCE_B_INIT)
+		queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * ab8500_chargalg_periodic_work() - Periodic work for the algorithm
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for the charging algorithm
+ */
+static void ab8500_chargalg_periodic_work(struct work_struct *work)
+{
+	struct ab8500_chargalg *di = container_of(work,
+		struct ab8500_chargalg, chargalg_periodic_work.work);
+
+	ab8500_chargalg_algorithm(di);
+
+	/*
+	 * If a charger is connected then the battery has to be monitored
+	 * frequently, else the work can be delayed.
+	 */
+	if (di->chg_info.conn_chg)
+		queue_delayed_work(di->chargalg_wq,
+			&di->chargalg_periodic_work,
+			di->bm->interval_charging * HZ);
+	else
+		queue_delayed_work(di->chargalg_wq,
+			&di->chargalg_periodic_work,
+			di->bm->interval_not_charging * HZ);
+}
+
+/**
+ * ab8500_chargalg_wd_work() - periodic work to kick the charger watchdog
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog
+ */
+static void ab8500_chargalg_wd_work(struct work_struct *work)
+{
+	int ret;
+	struct ab8500_chargalg *di = container_of(work,
+		struct ab8500_chargalg, chargalg_wd_work.work);
+
+	ret = ab8500_chargalg_kick_watchdog(di);
+	if (ret < 0)
+		dev_err(di->dev, "failed to kick watchdog\n");
+
+	queue_delayed_work(di->chargalg_wq,
+		&di->chargalg_wd_work, CHG_WD_INTERVAL);
+}
+
+/**
+ * ab8500_chargalg_work() - Work to run the charging algorithm instantly
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for calling the charging algorithm
+ */
+static void ab8500_chargalg_work(struct work_struct *work)
+{
+	struct ab8500_chargalg *di = container_of(work,
+		struct ab8500_chargalg, chargalg_work);
+
+	ab8500_chargalg_algorithm(di);
+}
+
+/**
+ * ab8500_chargalg_get_property() - get the chargalg properties
+ * @psy:	pointer to the power_supply structure
+ * @psp:	pointer to the power_supply_property structure
+ * @val:	pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * chargalg properties by reading the sysfs files.
+ * status:     charging/discharging/full/unknown
+ * health:     health of the battery
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_chargalg_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_chargalg *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = di->charge_status;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->events.batt_ovv) {
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		} else if (di->events.btemp_underover) {
+			if (di->batt_data.temp <= di->bm->bi->temp_min)
+				val->intval = POWER_SUPPLY_HEALTH_COLD;
+			else
+				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		} else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
+			   di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) {
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		} else {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int __maybe_unused ab8500_chargalg_resume(struct device *dev)
+{
+	struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+	/* Kick charger watchdog if charging (any charger online) */
+	if (di->chg_info.online_chg)
+		queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
+
+	/*
+	 * Run the charging algorithm directly to be sure we don't
+	 * do it too seldom
+	 */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_chargalg_suspend(struct device *dev)
+{
+	struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+	if (di->chg_info.online_chg)
+		cancel_delayed_work_sync(&di->chargalg_wd_work);
+
+	cancel_delayed_work_sync(&di->chargalg_periodic_work);
+
+	return 0;
+}
+
+static char *supply_interface[] = {
+	"ab8500_fg",
+};
+
+static const struct power_supply_desc ab8500_chargalg_desc = {
+	.name			= "ab8500_chargalg",
+	.type			= POWER_SUPPLY_TYPE_UNKNOWN,
+	.properties		= ab8500_chargalg_props,
+	.num_properties		= ARRAY_SIZE(ab8500_chargalg_props),
+	.get_property		= ab8500_chargalg_get_property,
+	.external_power_changed	= ab8500_chargalg_external_power_changed,
+};
+
+static int ab8500_chargalg_bind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for the chargalg */
+	di->chargalg_wq = alloc_ordered_workqueue("ab8500_chargalg_wq",
+						  WQ_MEM_RECLAIM);
+	if (di->chargalg_wq == NULL) {
+		dev_err(di->dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Run the charging algorithm */
+	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+	return 0;
+}
+
+static void ab8500_chargalg_unbind(struct device *dev, struct device *master,
+				   void *data)
+{
+	struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+	/* Stop all timers and work */
+	hrtimer_cancel(&di->safety_timer);
+	hrtimer_cancel(&di->maintenance_timer);
+
+	cancel_delayed_work_sync(&di->chargalg_periodic_work);
+	cancel_delayed_work_sync(&di->chargalg_wd_work);
+	cancel_work_sync(&di->chargalg_work);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->chargalg_wq);
+}
+
+static const struct component_ops ab8500_chargalg_component_ops = {
+	.bind = ab8500_chargalg_bind,
+	.unbind = ab8500_chargalg_unbind,
+};
+
+static int ab8500_chargalg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
+	struct ab8500_chargalg *di;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	/* get device struct and parent */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	psy_cfg.supplied_to = supply_interface;
+	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	psy_cfg.drv_data = di;
+
+	/* Initilialize safety timer */
+	hrtimer_init(&di->safety_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	di->safety_timer.function = ab8500_chargalg_safety_timer_expired;
+
+	/* Initilialize maintenance timer */
+	hrtimer_init(&di->maintenance_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	di->maintenance_timer.function =
+		ab8500_chargalg_maintenance_timer_expired;
+
+	/* Init work for chargalg */
+	INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work,
+		ab8500_chargalg_periodic_work);
+	INIT_DEFERRABLE_WORK(&di->chargalg_wd_work,
+		ab8500_chargalg_wd_work);
+
+	/* Init work for chargalg */
+	INIT_WORK(&di->chargalg_work, ab8500_chargalg_work);
+
+	/* To detect charger at startup */
+	di->chg_info.prev_conn_chg = -1;
+
+	/* Register chargalg power supply class */
+	di->chargalg_psy = devm_power_supply_register(di->dev,
+						 &ab8500_chargalg_desc,
+						 &psy_cfg);
+	if (IS_ERR(di->chargalg_psy)) {
+		dev_err(di->dev, "failed to register chargalg psy\n");
+		return PTR_ERR(di->chargalg_psy);
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	dev_info(di->dev, "probe success\n");
+	return component_add(dev, &ab8500_chargalg_component_ops);
+}
+
+static int ab8500_chargalg_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &ab8500_chargalg_component_ops);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_chargalg_pm_ops, ab8500_chargalg_suspend, ab8500_chargalg_resume);
+
+static const struct of_device_id ab8500_chargalg_match[] = {
+	{ .compatible = "stericsson,ab8500-chargalg", },
+	{ },
+};
+
+struct platform_driver ab8500_chargalg_driver = {
+	.probe = ab8500_chargalg_probe,
+	.remove = ab8500_chargalg_remove,
+	.driver = {
+		.name = "ab8500_chargalg",
+		.of_match_table = ab8500_chargalg_match,
+		.pm = &ab8500_chargalg_pm_ops,
+	},
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:ab8500-chargalg");
+MODULE_DESCRIPTION("ab8500 battery charging algorithm");
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
new file mode 100644
index 000000000..58757a579
--- /dev/null
+++ b/drivers/power/supply/ab8500_charger.c
@@ -0,0 +1,3745 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Charger driver for AB8500
+ *
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/component.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/usb/otg.h>
+#include <linux/mutex.h>
+#include <linux/iio/consumer.h>
+
+#include "ab8500-bm.h"
+#include "ab8500-chargalg.h"
+
+/* Charger constants */
+#define NO_PW_CONN			0
+#define AC_PW_CONN			1
+#define USB_PW_CONN			2
+
+#define MAIN_WDOG_ENA			0x01
+#define MAIN_WDOG_KICK			0x02
+#define MAIN_WDOG_DIS			0x00
+#define CHARG_WD_KICK			0x01
+#define MAIN_CH_ENA			0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N	0x02
+#define USB_CH_ENA			0x01
+#define USB_CHG_NO_OVERSHOOT_ENA_N	0x02
+#define MAIN_CH_DET			0x01
+#define MAIN_CH_CV_ON			0x04
+#define USB_CH_CV_ON			0x08
+#define VBUS_DET_DBNC100		0x02
+#define VBUS_DET_DBNC1			0x01
+#define OTP_ENABLE_WD			0x01
+#define DROP_COUNT_RESET		0x01
+#define USB_CH_DET			0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT	4
+#define VBUS_IN_CURR_LIM_SHIFT		4
+#define AUTO_VBUS_IN_CURR_LIM_SHIFT	4
+#define VBUS_IN_CURR_LIM_RETRY_SET_TIME	30 /* seconds */
+
+#define LED_INDICATOR_PWM_ENA		0x01
+#define LED_INDICATOR_PWM_DIS		0x00
+#define LED_IND_CUR_5MA			0x04
+#define LED_INDICATOR_PWM_DUTY_252_256	0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT			0x02
+#define VBUS_CH_NOK			0x08
+#define USB_CH_TH_PROT			0x02
+#define VBUS_OVV_TH			0x01
+#define MAIN_CH_NOK			0x01
+#define VBUS_DET			0x80
+
+#define MAIN_CH_STATUS2_MAINCHGDROP		0x80
+#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC	0x40
+#define USB_CH_VBUSDROP				0x40
+#define USB_CH_VBUSDETDBNC			0x01
+
+/* UsbLineStatus register bit masks */
+#define AB8500_USB_LINK_STATUS		0x78
+#define AB8505_USB_LINK_STATUS		0xF8
+#define AB8500_STD_HOST_SUSP		0x18
+#define USB_LINK_STATUS_SHIFT		3
+
+/* Watchdog timeout constant */
+#define WD_TIMER			0x30 /* 4min */
+#define WD_KICK_INTERVAL		(60 * HZ)
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG			0x4E
+
+/* Step up/down delay in us */
+#define STEP_UDELAY			1000
+
+#define CHARGER_STATUS_POLL 10 /* in ms */
+
+#define CHG_WD_INTERVAL			(60 * HZ)
+
+#define AB8500_SW_CONTROL_FALLBACK	0x03
+/* Wait for enumeration before charing in us */
+#define WAIT_ACA_RID_ENUMERATION	(5 * 1000)
+/*External charger control*/
+#define AB8500_SYS_CHARGER_CONTROL_REG		0x52
+#define EXTERNAL_CHARGER_DISABLE_REG_VAL	0x03
+#define EXTERNAL_CHARGER_ENABLE_REG_VAL		0x07
+
+/* UsbLineStatus register - usb types */
+enum ab8500_charger_link_status {
+	USB_STAT_NOT_CONFIGURED,
+	USB_STAT_STD_HOST_NC,
+	USB_STAT_STD_HOST_C_NS,
+	USB_STAT_STD_HOST_C_S,
+	USB_STAT_HOST_CHG_NM,
+	USB_STAT_HOST_CHG_HS,
+	USB_STAT_HOST_CHG_HS_CHIRP,
+	USB_STAT_DEDICATED_CHG,
+	USB_STAT_ACA_RID_A,
+	USB_STAT_ACA_RID_B,
+	USB_STAT_ACA_RID_C_NM,
+	USB_STAT_ACA_RID_C_HS,
+	USB_STAT_ACA_RID_C_HS_CHIRP,
+	USB_STAT_HM_IDGND,
+	USB_STAT_RESERVED,
+	USB_STAT_NOT_VALID_LINK,
+	USB_STAT_PHY_EN,
+	USB_STAT_SUP_NO_IDGND_VBUS,
+	USB_STAT_SUP_IDGND_VBUS,
+	USB_STAT_CHARGER_LINE_1,
+	USB_STAT_CARKIT_1,
+	USB_STAT_CARKIT_2,
+	USB_STAT_ACA_DOCK_CHARGER,
+};
+
+enum ab8500_usb_state {
+	AB8500_BM_USB_STATE_RESET_HS,	/* HighSpeed Reset */
+	AB8500_BM_USB_STATE_RESET_FS,	/* FullSpeed/LowSpeed Reset */
+	AB8500_BM_USB_STATE_CONFIGURED,
+	AB8500_BM_USB_STATE_SUSPEND,
+	AB8500_BM_USB_STATE_RESUME,
+	AB8500_BM_USB_STATE_MAX,
+};
+
+/* VBUS input current limits supported in AB8500 in uA */
+#define USB_CH_IP_CUR_LVL_0P05		50000
+#define USB_CH_IP_CUR_LVL_0P09		98000
+#define USB_CH_IP_CUR_LVL_0P19		193000
+#define USB_CH_IP_CUR_LVL_0P29		290000
+#define USB_CH_IP_CUR_LVL_0P38		380000
+#define USB_CH_IP_CUR_LVL_0P45		450000
+#define USB_CH_IP_CUR_LVL_0P5		500000
+#define USB_CH_IP_CUR_LVL_0P6		600000
+#define USB_CH_IP_CUR_LVL_0P7		700000
+#define USB_CH_IP_CUR_LVL_0P8		800000
+#define USB_CH_IP_CUR_LVL_0P9		900000
+#define USB_CH_IP_CUR_LVL_1P0		1000000
+#define USB_CH_IP_CUR_LVL_1P1		1100000
+#define USB_CH_IP_CUR_LVL_1P3		1300000
+#define USB_CH_IP_CUR_LVL_1P4		1400000
+#define USB_CH_IP_CUR_LVL_1P5		1500000
+
+#define VBAT_TRESH_IP_CUR_RED		3800000
+
+#define to_ab8500_charger_usb_device_info(x) container_of((x), \
+	struct ab8500_charger, usb_chg)
+#define to_ab8500_charger_ac_device_info(x) container_of((x), \
+	struct ab8500_charger, ac_chg)
+
+/**
+ * struct ab8500_charger_interrupts - ab8500 interrupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_charger_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_charger_info {
+	int charger_connected;
+	int charger_online;
+	int charger_voltage_uv;
+	int cv_active;
+	bool wd_expired;
+	int charger_current_ua;
+};
+
+struct ab8500_charger_event_flags {
+	bool mainextchnotok;
+	bool main_thermal_prot;
+	bool usb_thermal_prot;
+	bool vbus_ovv;
+	bool usbchargernotok;
+	bool chgwdexp;
+	bool vbus_collapse;
+	bool vbus_drop_end;
+};
+
+struct ab8500_charger_usb_state {
+	int usb_current_ua;
+	int usb_current_tmp_ua;
+	enum ab8500_usb_state state;
+	enum ab8500_usb_state state_tmp;
+	spinlock_t usb_lock;
+};
+
+struct ab8500_charger_max_usb_in_curr {
+	int usb_type_max_ua;
+	int set_max_ua;
+	int calculated_max_ua;
+};
+
+/**
+ * struct ab8500_charger - ab8500 Charger device information
+ * @dev:		Pointer to the structure device
+ * @vbus_detected:	VBUS detected
+ * @vbus_detected_start:
+ *			VBUS detected during startup
+ * @ac_conn:		This will be true when the AC charger has been plugged
+ * @vddadc_en_ac:	Indicate if VDD ADC supply is enabled because AC
+ *			charger is enabled
+ * @vddadc_en_usb:	Indicate if VDD ADC supply is enabled because USB
+ *			charger is enabled
+ * @vbat		Battery voltage
+ * @old_vbat		Previously measured battery voltage
+ * @usb_device_is_unrecognised	USB device is unrecognised by the hardware
+ * @autopower		Indicate if we should have automatic pwron after pwrloss
+ * @autopower_cfg	platform specific power config support for "pwron after pwrloss"
+ * @invalid_charger_detect_state State when forcing AB to use invalid charger
+ * @is_aca_rid:		Incicate if accessory is ACA type
+ * @current_stepping_sessions:
+ *			Counter for current stepping sessions
+ * @parent:		Pointer to the struct ab8500
+ * @adc_main_charger_v	ADC channel for main charger voltage
+ * @adc_main_charger_c	ADC channel for main charger current
+ * @adc_vbus_v		ADC channel for USB charger voltage
+ * @adc_usb_charger_c	ADC channel for USB charger current
+ * @bm:           	Platform specific battery management information
+ * @flags:		Structure for information about events triggered
+ * @usb_state:		Structure for usb stack information
+ * @max_usb_in_curr:	Max USB charger input current
+ * @ac_chg:		AC charger power supply
+ * @usb_chg:		USB charger power supply
+ * @ac:			Structure that holds the AC charger properties
+ * @usb:		Structure that holds the USB charger properties
+ * @regu:		Pointer to the struct regulator
+ * @charger_wq:		Work queue for the IRQs and checking HW state
+ * @usb_ipt_crnt_lock:	Lock to protect VBUS input current setting from mutuals
+ * @pm_lock:		Lock to prevent system to suspend
+ * @check_vbat_work	Work for checking vbat threshold to adjust vbus current
+ * @check_hw_failure_work:	Work for checking HW state
+ * @check_usbchgnotok_work:	Work for checking USB charger not ok status
+ * @kick_wd_work:		Work for kicking the charger watchdog in case
+ *				of ABB rev 1.* due to the watchog logic bug
+ * @ac_charger_attached_work:	Work for checking if AC charger is still
+ *				connected
+ * @usb_charger_attached_work:	Work for checking if USB charger is still
+ *				connected
+ * @ac_work:			Work for checking AC charger connection
+ * @detect_usb_type_work:	Work for detecting the USB type connected
+ * @usb_link_status_work:	Work for checking the new USB link status
+ * @usb_state_changed_work:	Work for checking USB state
+ * @attach_work:		Work for detecting USB type
+ * @vbus_drop_end_work:		Work for detecting VBUS drop end
+ * @check_main_thermal_prot_work:
+ *				Work for checking Main thermal status
+ * @check_usb_thermal_prot_work:
+ *				Work for checking USB thermal status
+ * @charger_attached_mutex:	For controlling the wakelock
+ */
+struct ab8500_charger {
+	struct device *dev;
+	bool vbus_detected;
+	bool vbus_detected_start;
+	bool ac_conn;
+	bool vddadc_en_ac;
+	bool vddadc_en_usb;
+	int vbat;
+	int old_vbat;
+	bool usb_device_is_unrecognised;
+	bool autopower;
+	bool autopower_cfg;
+	int invalid_charger_detect_state;
+	int is_aca_rid;
+	atomic_t current_stepping_sessions;
+	struct ab8500 *parent;
+	struct iio_channel *adc_main_charger_v;
+	struct iio_channel *adc_main_charger_c;
+	struct iio_channel *adc_vbus_v;
+	struct iio_channel *adc_usb_charger_c;
+	struct ab8500_bm_data *bm;
+	struct ab8500_charger_event_flags flags;
+	struct ab8500_charger_usb_state usb_state;
+	struct ab8500_charger_max_usb_in_curr max_usb_in_curr;
+	struct ux500_charger ac_chg;
+	struct ux500_charger usb_chg;
+	struct ab8500_charger_info ac;
+	struct ab8500_charger_info usb;
+	struct regulator *regu;
+	struct workqueue_struct *charger_wq;
+	struct mutex usb_ipt_crnt_lock;
+	struct delayed_work check_vbat_work;
+	struct delayed_work check_hw_failure_work;
+	struct delayed_work check_usbchgnotok_work;
+	struct delayed_work kick_wd_work;
+	struct delayed_work usb_state_changed_work;
+	struct delayed_work attach_work;
+	struct delayed_work ac_charger_attached_work;
+	struct delayed_work usb_charger_attached_work;
+	struct delayed_work vbus_drop_end_work;
+	struct work_struct ac_work;
+	struct work_struct detect_usb_type_work;
+	struct work_struct usb_link_status_work;
+	struct work_struct check_main_thermal_prot_work;
+	struct work_struct check_usb_thermal_prot_work;
+	struct usb_phy *usb_phy;
+	struct notifier_block nb;
+	struct mutex charger_attached_mutex;
+};
+
+/* AC properties */
+static enum power_supply_property ab8500_charger_ac_props[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/* USB properties */
+static enum power_supply_property ab8500_charger_usb_props[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/*
+ * Function for enabling and disabling sw fallback mode
+ * should always be disabled when no charger is connected.
+ */
+static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
+		bool fallback)
+{
+	u8 val;
+	u8 reg;
+	u8 bank;
+	u8 bit;
+	int ret;
+
+	dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
+
+	if (is_ab8500(di->parent)) {
+		bank = 0x15;
+		reg = 0x0;
+		bit = 3;
+	} else {
+		bank = AB8500_SYS_CTRL1_BLOCK;
+		reg = AB8500_SW_CONTROL_FALLBACK;
+		bit = 0;
+	}
+
+	/* read the register containing fallback bit */
+	ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%d read failed\n", __LINE__);
+		return;
+	}
+
+	if (is_ab8500(di->parent)) {
+		/* enable the OPT emulation registers */
+		ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+		if (ret) {
+			dev_err(di->dev, "%d write failed\n", __LINE__);
+			goto disable_otp;
+		}
+	}
+
+	if (fallback)
+		val |= (1 << bit);
+	else
+		val &= ~(1 << bit);
+
+	/* write back the changed fallback bit value to register */
+	ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
+	if (ret) {
+		dev_err(di->dev, "%d write failed\n", __LINE__);
+	}
+
+disable_otp:
+	if (is_ab8500(di->parent)) {
+		/* disable the set OTP registers again */
+		ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+		if (ret) {
+			dev_err(di->dev, "%d write failed\n", __LINE__);
+		}
+	}
+}
+
+/**
+ * ab8500_power_supply_changed - a wrapper with local extensions for
+ * power_supply_changed
+ * @di:	  pointer to the ab8500_charger structure
+ * @psy:  pointer to power_supply_that have changed.
+ *
+ */
+static void ab8500_power_supply_changed(struct ab8500_charger *di,
+					struct power_supply *psy)
+{
+	/*
+	 * This happens if we get notifications or interrupts and
+	 * the platform has been configured not to support one or
+	 * other type of charging.
+	 */
+	if (!psy)
+		return;
+
+	if (di->autopower_cfg) {
+		if (!di->usb.charger_connected &&
+		    !di->ac.charger_connected &&
+		    di->autopower) {
+			di->autopower = false;
+			ab8500_enable_disable_sw_fallback(di, false);
+		} else if (!di->autopower &&
+			   (di->ac.charger_connected ||
+			    di->usb.charger_connected)) {
+			di->autopower = true;
+			ab8500_enable_disable_sw_fallback(di, true);
+		}
+	}
+	power_supply_changed(psy);
+}
+
+static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
+	bool connected)
+{
+	if (connected != di->usb.charger_connected) {
+		dev_dbg(di->dev, "USB connected:%i\n", connected);
+		di->usb.charger_connected = connected;
+
+		if (!connected)
+			di->flags.vbus_drop_end = false;
+
+		/*
+		 * Sometimes the platform is configured not to support
+		 * USB charging and no psy has been created, but we still
+		 * will get these notifications.
+		 */
+		if (di->usb_chg.psy) {
+			sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL,
+				     "present");
+		}
+
+		if (connected) {
+			mutex_lock(&di->charger_attached_mutex);
+			mutex_unlock(&di->charger_attached_mutex);
+
+			if (is_ab8500(di->parent))
+				queue_delayed_work(di->charger_wq,
+					   &di->usb_charger_attached_work,
+					   HZ);
+		} else {
+			cancel_delayed_work_sync(&di->usb_charger_attached_work);
+			mutex_lock(&di->charger_attached_mutex);
+			mutex_unlock(&di->charger_attached_mutex);
+		}
+	}
+}
+
+/**
+ * ab8500_charger_get_ac_voltage() - get ac charger voltage
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger voltage in microvolt (on success)
+ */
+static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
+{
+	int vch, ret;
+
+	/* Only measure voltage if the charger is connected */
+	if (di->ac.charger_connected) {
+		ret = iio_read_channel_processed(di->adc_main_charger_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+	} else {
+		vch = 0;
+	}
+	/* Convert to microvolt, IIO returns millivolt */
+	return vch * 1000;
+}
+
+/**
+ * ab8500_charger_ac_cv() - check if the main charger is in CV mode
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_ac_cv(struct ab8500_charger *di)
+{
+	u8 val;
+	int ret = 0;
+
+	/* Only check CV mode if the charger is online */
+	if (di->ac.charger_online) {
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_STATUS1_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return 0;
+		}
+
+		if (val & MAIN_CH_CV_ON)
+			ret = 1;
+		else
+			ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_get_vbus_voltage() - get vbus voltage
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the vbus voltage.
+ * Returns vbus voltage in microvolt (on success)
+ */
+static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
+{
+	int vch, ret;
+
+	/* Only measure voltage if the charger is connected */
+	if (di->usb.charger_connected) {
+		ret = iio_read_channel_processed(di->adc_vbus_v, &vch);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+	} else {
+		vch = 0;
+	}
+	/* Convert to microvolt, IIO returns millivolt */
+	return vch * 1000;
+}
+
+/**
+ * ab8500_charger_get_usb_current() - get usb charger current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the usb charger current.
+ * Returns usb current in microamperes (on success) and error code on failure
+ */
+static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
+{
+	int ich, ret;
+
+	/* Only measure current if the charger is online */
+	if (di->usb.charger_online) {
+		ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+	} else {
+		ich = 0;
+	}
+	/* Return microamperes */
+	return ich * 1000;
+}
+
+/**
+ * ab8500_charger_get_ac_current() - get ac charger current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the ac charger current.
+ * Returns ac current in microamperes (on success) and error code on failure.
+ */
+static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
+{
+	int ich, ret;
+
+	/* Only measure current if the charger is online */
+	if (di->ac.charger_online) {
+		ret = iio_read_channel_processed(di->adc_main_charger_c, &ich);
+		if (ret < 0)
+			dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+	} else {
+		ich = 0;
+	}
+	/* Return microamperes */
+	return ich * 1000;
+}
+
+/**
+ * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_usb_cv(struct ab8500_charger *di)
+{
+	int ret;
+	u8 val;
+
+	/* Only check CV mode if the charger is online */
+	if (di->usb.charger_online) {
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_USBCH_STAT1_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return 0;
+		}
+
+		if (val & USB_CH_CV_ON)
+			ret = 1;
+		else
+			ret = 0;
+	} else {
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_detect_chargers() - Detect the connected chargers
+ * @di:		pointer to the ab8500_charger structure
+ * @probe:	if probe, don't delay and wait for HW
+ *
+ * Returns the type of charger connected.
+ * For USB it will not mean we can actually charge from it
+ * but that there is a USB cable connected that we have to
+ * identify. This is used during startup when we don't get
+ * interrupts of the charger detection
+ *
+ * Returns an integer value, that means,
+ * NO_PW_CONN  no power supply is connected
+ * AC_PW_CONN  if the AC power supply is connected
+ * USB_PW_CONN  if the USB power supply is connected
+ * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
+ */
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
+{
+	int result = NO_PW_CONN;
+	int ret;
+	u8 val;
+
+	/* Check for AC charger */
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_STATUS1_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+
+	if (val & MAIN_CH_DET)
+		result = AC_PW_CONN;
+
+	/* Check for USB charger */
+
+	if (!probe) {
+		/*
+		 * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
+		 * when disconnecting ACA even though no
+		 * charger was connected. Try waiting a little
+		 * longer than the 100 ms of VBUS_DET_DBNC100...
+		 */
+		msleep(110);
+	}
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_USBCH_STAT1_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+	dev_dbg(di->dev,
+		"%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
+		val);
+	if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
+		result |= USB_PW_CONN;
+
+	return result;
+}
+
+/**
+ * ab8500_charger_max_usb_curr() - get the max curr for the USB type
+ * @di:			pointer to the ab8500_charger structure
+ * @link_status:	the identified USB type
+ *
+ * Get the maximum current that is allowed to be drawn from the host
+ * based on the USB type.
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
+		enum ab8500_charger_link_status link_status)
+{
+	int ret = 0;
+
+	di->usb_device_is_unrecognised = false;
+
+	/*
+	 * Platform only supports USB 2.0.
+	 * This means that charging current from USB source
+	 * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*
+	 * should set USB_CH_IP_CUR_LVL_0P5.
+	 */
+
+	switch (link_status) {
+	case USB_STAT_STD_HOST_NC:
+	case USB_STAT_STD_HOST_C_NS:
+	case USB_STAT_STD_HOST_C_S:
+		dev_dbg(di->dev, "USB Type - Standard host is "
+			"detected through USB driver\n");
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_HOST_CHG_HS_CHIRP:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_HOST_CHG_HS:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_ACA_RID_C_HS:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P9;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_ACA_RID_A:
+		/*
+		 * Dedicated charger level minus maximum current accessory
+		 * can consume (900mA). Closest level is 500mA
+		 */
+		dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		di->is_aca_rid = 1;
+		break;
+	case USB_STAT_ACA_RID_B:
+		/*
+		 * Dedicated charger level minus 120mA (20mA for ACA and
+		 * 100mA for potential accessory). Closest level is 1300mA
+		 */
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P3;
+		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+				di->max_usb_in_curr.usb_type_max_ua);
+		di->is_aca_rid = 1;
+		break;
+	case USB_STAT_HOST_CHG_NM:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_DEDICATED_CHG:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P5;
+		di->is_aca_rid = 0;
+		break;
+	case USB_STAT_ACA_RID_C_HS_CHIRP:
+	case USB_STAT_ACA_RID_C_NM:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_1P5;
+		di->is_aca_rid = 1;
+		break;
+	case USB_STAT_NOT_CONFIGURED:
+		if (di->vbus_detected) {
+			di->usb_device_is_unrecognised = true;
+			dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+			di->max_usb_in_curr.usb_type_max_ua =
+						USB_CH_IP_CUR_LVL_1P5;
+			break;
+		}
+		fallthrough;
+	case USB_STAT_HM_IDGND:
+		dev_err(di->dev, "USB Type - Charging not allowed\n");
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
+		ret = -ENXIO;
+		break;
+	case USB_STAT_RESERVED:
+		if (is_ab8500(di->parent)) {
+			di->flags.vbus_collapse = true;
+			dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
+						"VBUS has collapsed\n");
+			ret = -ENXIO;
+			break;
+		} else {
+			dev_dbg(di->dev, "USB Type - Charging not allowed\n");
+			di->max_usb_in_curr.usb_type_max_ua =
+						USB_CH_IP_CUR_LVL_0P05;
+			dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+				link_status,
+				di->max_usb_in_curr.usb_type_max_ua);
+			ret = -ENXIO;
+			break;
+		}
+	case USB_STAT_CARKIT_1:
+	case USB_STAT_CARKIT_2:
+	case USB_STAT_ACA_DOCK_CHARGER:
+	case USB_STAT_CHARGER_LINE_1:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+				di->max_usb_in_curr.usb_type_max_ua);
+		break;
+	case USB_STAT_NOT_VALID_LINK:
+		dev_err(di->dev, "USB Type invalid - try charging anyway\n");
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		break;
+
+	default:
+		dev_err(di->dev, "USB Type - Unknown\n");
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
+		ret = -ENXIO;
+		break;
+	}
+
+	di->max_usb_in_curr.set_max_ua = di->max_usb_in_curr.usb_type_max_ua;
+	dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+		link_status, di->max_usb_in_curr.set_max_ua);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_read_usb_type() - read the type of usb connected
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
+{
+	int ret;
+	u8 val;
+
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+	if (is_ab8500(di->parent))
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+			AB8500_USB_LINE_STAT_REG, &val);
+	else
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+
+	/* get the USB type */
+	if (is_ab8500(di->parent))
+		val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+	else
+		val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+	ret = ab8500_charger_max_usb_curr(di,
+		(enum ab8500_charger_link_status) val);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_detect_usb_type() - get the type of usb connected
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
+{
+	int i, ret;
+	u8 val;
+
+	/*
+	 * On getting the VBUS rising edge detect interrupt there
+	 * is a 250ms delay after which the register UsbLineStatus
+	 * is filled with valid data.
+	 */
+	for (i = 0; i < 10; i++) {
+		msleep(250);
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
+			&val);
+		dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
+			__func__, val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return ret;
+		}
+
+		if (is_ab8500(di->parent))
+			ret = abx500_get_register_interruptible(di->dev,
+				AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
+		else
+			ret = abx500_get_register_interruptible(di->dev,
+				AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return ret;
+		}
+		dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
+			val);
+		/*
+		 * Until the IT source register is read the UsbLineStatus
+		 * register is not updated, hence doing the same
+		 * Revisit this:
+		 */
+
+		/* get the USB type */
+		if (is_ab8500(di->parent))
+			val = (val & AB8500_USB_LINK_STATUS) >>
+							USB_LINK_STATUS_SHIFT;
+		else
+			val = (val & AB8505_USB_LINK_STATUS) >>
+							USB_LINK_STATUS_SHIFT;
+		if (val)
+			break;
+	}
+	ret = ab8500_charger_max_usb_curr(di,
+		(enum ab8500_charger_link_status) val);
+
+	return ret;
+}
+
+/*
+ * This array maps the raw hex value to charger voltage used by the AB8500
+ * Values taken from the UM0836, in microvolt.
+ */
+static int ab8500_charger_voltage_map[] = {
+	3500000,
+	3525000,
+	3550000,
+	3575000,
+	3600000,
+	3625000,
+	3650000,
+	3675000,
+	3700000,
+	3725000,
+	3750000,
+	3775000,
+	3800000,
+	3825000,
+	3850000,
+	3875000,
+	3900000,
+	3925000,
+	3950000,
+	3975000,
+	4000000,
+	4025000,
+	4050000,
+	4060000,
+	4070000,
+	4080000,
+	4090000,
+	4100000,
+	4110000,
+	4120000,
+	4130000,
+	4140000,
+	4150000,
+	4160000,
+	4170000,
+	4180000,
+	4190000,
+	4200000,
+	4210000,
+	4220000,
+	4230000,
+	4240000,
+	4250000,
+	4260000,
+	4270000,
+	4280000,
+	4290000,
+	4300000,
+	4310000,
+	4320000,
+	4330000,
+	4340000,
+	4350000,
+	4360000,
+	4370000,
+	4380000,
+	4390000,
+	4400000,
+	4410000,
+	4420000,
+	4430000,
+	4440000,
+	4450000,
+	4460000,
+	4470000,
+	4480000,
+	4490000,
+	4500000,
+	4510000,
+	4520000,
+	4530000,
+	4540000,
+	4550000,
+	4560000,
+	4570000,
+	4580000,
+	4590000,
+	4600000,
+};
+
+static int ab8500_voltage_to_regval(int voltage_uv)
+{
+	int i;
+
+	/* Special case for voltage below 3.5V */
+	if (voltage_uv < ab8500_charger_voltage_map[0])
+		return LOW_VOLT_REG;
+
+	for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
+		if (voltage_uv < ab8500_charger_voltage_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
+	if (voltage_uv == ab8500_charger_voltage_map[i])
+		return i;
+	else
+		return -1;
+}
+
+/* This array maps the raw register value to charger input current */
+static int ab8500_charge_input_curr_map[] = {
+	50000, 98000, 193000, 290000, 380000, 450000, 500000, 600000,
+	700000, 800000, 900000, 1000000, 1100000, 1300000, 1400000, 1500000,
+};
+
+/* This array maps the raw register value to charger output current */
+static int ab8500_charge_output_curr_map[] = {
+	100000, 200000, 300000, 400000, 500000, 600000, 700000, 800000,
+	900000, 1000000, 1100000, 1200000, 1300000, 1400000, 1500000, 1500000,
+};
+
+static int ab8500_current_to_regval(struct ab8500_charger *di, int curr_ua)
+{
+	int i;
+
+	if (curr_ua < ab8500_charge_output_curr_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_charge_output_curr_map); i++) {
+		if (curr_ua < ab8500_charge_output_curr_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i =  ARRAY_SIZE(ab8500_charge_output_curr_map) - 1;
+	if (curr_ua == ab8500_charge_output_curr_map[i])
+		return i;
+	else
+		return -1;
+}
+
+static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr_ua)
+{
+	int i;
+
+	if (curr_ua < ab8500_charge_input_curr_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_charge_input_curr_map); i++) {
+		if (curr_ua < ab8500_charge_input_curr_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i =  ARRAY_SIZE(ab8500_charge_input_curr_map) - 1;
+	if (curr_ua == ab8500_charge_input_curr_map[i])
+		return i;
+	else
+		return -1;
+}
+
+/**
+ * ab8500_charger_get_usb_cur() - get usb current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * The usb stack provides the maximum current that can be drawn from
+ * the standard usb host. This will be in uA.
+ * This function converts current in uA to a value that can be written
+ * to the register. Returns -1 if charging is not allowed
+ */
+static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
+{
+	int ret = 0;
+	switch (di->usb_state.usb_current_ua) {
+	case 100000:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P09;
+		break;
+	case 200000:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P19;
+		break;
+	case 300000:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P29;
+		break;
+	case 400000:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P38;
+		break;
+	case 500000:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P5;
+		break;
+	default:
+		di->max_usb_in_curr.usb_type_max_ua = USB_CH_IP_CUR_LVL_0P05;
+		ret = -EPERM;
+		break;
+	}
+	di->max_usb_in_curr.set_max_ua = di->max_usb_in_curr.usb_type_max_ua;
+	return ret;
+}
+
+/**
+ * ab8500_charger_check_continue_stepping() - Check to allow stepping
+ * @di:		pointer to the ab8500_charger structure
+ * @reg:	select what charger register to check
+ *
+ * Check if current stepping should be allowed to continue.
+ * Checks if charger source has not collapsed. If it has, further stepping
+ * is not allowed.
+ */
+static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di,
+						   int reg)
+{
+	if (reg == AB8500_USBCH_IPT_CRNTLVL_REG)
+		return !di->flags.vbus_drop_end;
+	else
+		return true;
+}
+
+/**
+ * ab8500_charger_set_current() - set charger current
+ * @di:		pointer to the ab8500_charger structure
+ * @ich_ua:	charger current, in uA
+ * @reg:	select what charger register to set
+ *
+ * Set charger current.
+ * There is no state machine in the AB to step up/down the charger
+ * current to avoid dips and spikes on MAIN, VBUS and VBAT when
+ * charging is started. Instead we need to implement
+ * this charger current step-up/down here.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_current(struct ab8500_charger *di,
+	int ich_ua, int reg)
+{
+	int ret = 0;
+	int curr_index, prev_curr_index, shift_value, i;
+	u8 reg_value;
+	u32 step_udelay;
+	bool no_stepping = false;
+
+	atomic_inc(&di->current_stepping_sessions);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+		reg, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s read failed\n", __func__);
+		goto exit_set_current;
+	}
+
+	switch (reg) {
+	case AB8500_MCH_IPT_CURLVL_REG:
+		shift_value = MAIN_CH_INPUT_CURR_SHIFT;
+		prev_curr_index = (reg_value >> shift_value);
+		curr_index = ab8500_current_to_regval(di, ich_ua);
+		step_udelay = STEP_UDELAY;
+		if (!di->ac.charger_connected)
+			no_stepping = true;
+		break;
+	case AB8500_USBCH_IPT_CRNTLVL_REG:
+		shift_value = VBUS_IN_CURR_LIM_SHIFT;
+		prev_curr_index = (reg_value >> shift_value);
+		curr_index = ab8500_vbus_in_curr_to_regval(di, ich_ua);
+		step_udelay = STEP_UDELAY * 100;
+
+		if (!di->usb.charger_connected)
+			no_stepping = true;
+		break;
+	case AB8500_CH_OPT_CRNTLVL_REG:
+		shift_value = 0;
+		prev_curr_index = (reg_value >> shift_value);
+		curr_index = ab8500_current_to_regval(di, ich_ua);
+		step_udelay = STEP_UDELAY;
+		if (curr_index && (curr_index - prev_curr_index) > 1)
+			step_udelay *= 100;
+
+		if (!di->usb.charger_connected && !di->ac.charger_connected)
+			no_stepping = true;
+
+		break;
+	default:
+		dev_err(di->dev, "%s current register not valid\n", __func__);
+		ret = -ENXIO;
+		goto exit_set_current;
+	}
+
+	if (curr_index < 0) {
+		dev_err(di->dev, "requested current limit out-of-range\n");
+		ret = -ENXIO;
+		goto exit_set_current;
+	}
+
+	/* only update current if it's been changed */
+	if (prev_curr_index == curr_index) {
+		dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
+			__func__, reg);
+		ret = 0;
+		goto exit_set_current;
+	}
+
+	dev_dbg(di->dev, "%s set charger current: %d uA for reg: 0x%02x\n",
+		__func__, ich_ua, reg);
+
+	if (no_stepping) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+					reg, (u8)curr_index << shift_value);
+		if (ret)
+			dev_err(di->dev, "%s write failed\n", __func__);
+	} else if (prev_curr_index > curr_index) {
+		for (i = prev_curr_index - 1; i >= curr_index; i--) {
+			dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
+				(u8) i << shift_value, reg);
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER, reg, (u8)i << shift_value);
+			if (ret) {
+				dev_err(di->dev, "%s write failed\n", __func__);
+				goto exit_set_current;
+			}
+			if (i != curr_index)
+				usleep_range(step_udelay, step_udelay * 2);
+		}
+	} else {
+		bool allow = true;
+		for (i = prev_curr_index + 1; i <= curr_index && allow; i++) {
+			dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
+				(u8)i << shift_value, reg);
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER, reg, (u8)i << shift_value);
+			if (ret) {
+				dev_err(di->dev, "%s write failed\n", __func__);
+				goto exit_set_current;
+			}
+			if (i != curr_index)
+				usleep_range(step_udelay, step_udelay * 2);
+
+			allow = ab8500_charger_check_continue_stepping(di, reg);
+		}
+	}
+
+exit_set_current:
+	atomic_dec(&di->current_stepping_sessions);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
+ * @di:		pointer to the ab8500_charger structure
+ * @ich_in_ua:	charger input current limit in microampere
+ *
+ * Sets the current that can be drawn from the USB host
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
+		int ich_in_ua)
+{
+	int min_value;
+	int ret;
+
+	/* We should always use to lowest current limit */
+	min_value = min(di->bm->chg_params->usb_curr_max_ua, ich_in_ua);
+	if (di->max_usb_in_curr.set_max_ua > 0)
+		min_value = min(di->max_usb_in_curr.set_max_ua, min_value);
+
+	if (di->usb_state.usb_current_ua >= 0)
+		min_value = min(di->usb_state.usb_current_ua, min_value);
+
+	switch (min_value) {
+	case 100000:
+		if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+			min_value = USB_CH_IP_CUR_LVL_0P05;
+		break;
+	case 500000:
+		if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+			min_value = USB_CH_IP_CUR_LVL_0P45;
+		break;
+	default:
+		break;
+	}
+
+	dev_info(di->dev, "VBUS input current limit set to %d uA\n", min_value);
+
+	mutex_lock(&di->usb_ipt_crnt_lock);
+	ret = ab8500_charger_set_current(di, min_value,
+		AB8500_USBCH_IPT_CRNTLVL_REG);
+	mutex_unlock(&di->usb_ipt_crnt_lock);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_set_main_in_curr() - set main charger input current
+ * @di:		pointer to the ab8500_charger structure
+ * @ich_in_ua:	input charger current, in uA
+ *
+ * Set main charger input current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
+	int ich_in_ua)
+{
+	return ab8500_charger_set_current(di, ich_in_ua,
+		AB8500_MCH_IPT_CURLVL_REG);
+}
+
+/**
+ * ab8500_charger_set_output_curr() - set charger output current
+ * @di:		pointer to the ab8500_charger structure
+ * @ich_out_ua:	output charger current, in uA
+ *
+ * Set charger output current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
+	int ich_out_ua)
+{
+	return ab8500_charger_set_current(di, ich_out_ua,
+		AB8500_CH_OPT_CRNTLVL_REG);
+}
+
+/**
+ * ab8500_charger_led_en() - turn on/off chargign led
+ * @di:		pointer to the ab8500_charger structure
+ * @on:		flag to turn on/off the chargign led
+ *
+ * Power ON/OFF charging LED indication
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
+{
+	int ret;
+
+	if (on) {
+		/* Power ON charging LED indicator, set LED current to 5mA */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_CTRL,
+			(LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
+		if (ret) {
+			dev_err(di->dev, "Power ON LED failed\n");
+			return ret;
+		}
+		/* LED indicator PWM duty cycle 252/256 */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_DUTY,
+			LED_INDICATOR_PWM_DUTY_252_256);
+		if (ret) {
+			dev_err(di->dev, "Set LED PWM duty cycle failed\n");
+			return ret;
+		}
+	} else {
+		/* Power off charging LED indicator */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_CTRL,
+			LED_INDICATOR_PWM_DIS);
+		if (ret) {
+			dev_err(di->dev, "Power-off LED failed\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_ac_en() - enable or disable ac charging
+ * @di:		pointer to the ab8500_charger structure
+ * @enable:	enable/disable flag
+ * @vset_uv:	charging voltage in microvolt
+ * @iset_ua:	charging current in microampere
+ *
+ * Enable/Disable AC/Mains charging and turns on/off the charging led
+ * respectively.
+ **/
+static int ab8500_charger_ac_en(struct ux500_charger *charger,
+	int enable, int vset_uv, int iset_ua)
+{
+	int ret;
+	int volt_index;
+	int curr_index;
+	int input_curr_index;
+	u8 overshoot = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+	if (enable) {
+		/* Check if AC is connected */
+		if (!di->ac.charger_connected) {
+			dev_err(di->dev, "AC charger not connected\n");
+			return -ENXIO;
+		}
+
+		/* Enable AC charging */
+		dev_dbg(di->dev, "Enable AC: %duV %duA\n", vset_uv, iset_ua);
+
+		/*
+		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+		 * will be triggered every time we enable the VDD ADC supply.
+		 * This will turn off charging for a short while.
+		 * It can be avoided by having the supply on when
+		 * there is a charger enabled. Normally the VDD ADC supply
+		 * is enabled every time a GPADC conversion is triggered.
+		 * We will force it to be enabled from this driver to have
+		 * the GPADC module independent of the AB8500 chargers
+		 */
+		if (!di->vddadc_en_ac) {
+			ret = regulator_enable(di->regu);
+			if (ret)
+				dev_warn(di->dev,
+					"Failed to enable regulator\n");
+			else
+				di->vddadc_en_ac = true;
+		}
+
+		/* Check if the requested voltage or current is valid */
+		volt_index = ab8500_voltage_to_regval(vset_uv);
+		curr_index = ab8500_current_to_regval(di, iset_ua);
+		input_curr_index = ab8500_current_to_regval(di,
+			di->bm->chg_params->ac_curr_max_ua);
+		if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
+			dev_err(di->dev,
+				"Charger voltage or current too high, "
+				"charging not started\n");
+			return -ENXIO;
+		}
+
+		/* ChVoltLevel: maximum battery charging voltage */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* MainChInputCurr: current that can be drawn from the charger*/
+		ret = ab8500_charger_set_main_in_curr(di,
+			di->bm->chg_params->ac_curr_max_ua);
+		if (ret) {
+			dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
+				__func__);
+			return ret;
+		}
+		/* ChOutputCurentLevel: protected output current */
+		ret = ab8500_charger_set_output_curr(di, iset_ua);
+		if (ret) {
+			dev_err(di->dev, "%s "
+				"Failed to set ChOutputCurentLevel\n",
+				__func__);
+			return ret;
+		}
+
+		/* Check if VBAT overshoot control should be enabled */
+		if (!di->bm->enable_overshoot)
+			overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
+
+		/* Enable Main Charger */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+
+		/* Power on charging LED indication */
+		ret = ab8500_charger_led_en(di, true);
+		if (ret < 0)
+			dev_err(di->dev, "failed to enable LED\n");
+
+		di->ac.charger_online = 1;
+	} else {
+		/* Disable AC charging */
+		if (is_ab8500_1p1_or_earlier(di->parent)) {
+			/*
+			 * For ABB revision 1.0 and 1.1 there is a bug in the
+			 * watchdog logic. That means we have to continuously
+			 * kick the charger watchdog even when no charger is
+			 * connected. This is only valid once the AC charger
+			 * has been enabled. This is a bug that is not handled
+			 * by the algorithm and the watchdog have to be kicked
+			 * by the charger driver when the AC charger
+			 * is disabled
+			 */
+			if (di->ac_conn) {
+				queue_delayed_work(di->charger_wq,
+					&di->kick_wd_work,
+					round_jiffies(WD_KICK_INTERVAL));
+			}
+
+			/*
+			 * We can't turn off charging completely
+			 * due to a bug in AB8500 cut1.
+			 * If we do, charging will not start again.
+			 * That is why we set the lowest voltage
+			 * and current possible
+			 */
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER,
+				AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
+			if (ret) {
+				dev_err(di->dev,
+					"%s write failed\n", __func__);
+				return ret;
+			}
+
+			ret = ab8500_charger_set_output_curr(di, 0);
+			if (ret) {
+				dev_err(di->dev, "%s "
+					"Failed to set ChOutputCurentLevel\n",
+					__func__);
+				return ret;
+			}
+		} else {
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER,
+				AB8500_MCH_CTRL1, 0);
+			if (ret) {
+				dev_err(di->dev,
+					"%s write failed\n", __func__);
+				return ret;
+			}
+		}
+
+		ret = ab8500_charger_led_en(di, false);
+		if (ret < 0)
+			dev_err(di->dev, "failed to disable LED\n");
+
+		di->ac.charger_online = 0;
+		di->ac.wd_expired = false;
+
+		/* Disable regulator if enabled */
+		if (di->vddadc_en_ac) {
+			regulator_disable(di->regu);
+			di->vddadc_en_ac = false;
+		}
+
+		dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
+	}
+	ab8500_power_supply_changed(di, di->ac_chg.psy);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_usb_en() - enable usb charging
+ * @di:		pointer to the ab8500_charger structure
+ * @enable:	enable/disable flag
+ * @vset_uv:	charging voltage in microvolt
+ * @ich_out_ua:	charger output current in microampere
+ *
+ * Enable/Disable USB charging and turns on/off the charging led respectively.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_en(struct ux500_charger *charger,
+	int enable, int vset_uv, int ich_out_ua)
+{
+	int ret;
+	int volt_index;
+	int curr_index;
+	u8 overshoot = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+	if (enable) {
+		/* Check if USB is connected */
+		if (!di->usb.charger_connected) {
+			dev_err(di->dev, "USB charger not connected\n");
+			return -ENXIO;
+		}
+
+		/*
+		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+		 * will be triggered every time we enable the VDD ADC supply.
+		 * This will turn off charging for a short while.
+		 * It can be avoided by having the supply on when
+		 * there is a charger enabled. Normally the VDD ADC supply
+		 * is enabled every time a GPADC conversion is triggered.
+		 * We will force it to be enabled from this driver to have
+		 * the GPADC module independent of the AB8500 chargers
+		 */
+		if (!di->vddadc_en_usb) {
+			ret = regulator_enable(di->regu);
+			if (ret)
+				dev_warn(di->dev,
+					"Failed to enable regulator\n");
+			else
+				di->vddadc_en_usb = true;
+		}
+
+		/* Enable USB charging */
+		dev_dbg(di->dev, "Enable USB: %d uV %d uA\n", vset_uv, ich_out_ua);
+
+		/* Check if the requested voltage or current is valid */
+		volt_index = ab8500_voltage_to_regval(vset_uv);
+		curr_index = ab8500_current_to_regval(di, ich_out_ua);
+		if (volt_index < 0 || curr_index < 0) {
+			dev_err(di->dev,
+				"Charger voltage or current too high, "
+				"charging not started\n");
+			return -ENXIO;
+		}
+
+		/*
+		 * ChVoltLevel: max voltage up to which battery can be
+		 * charged
+		 */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* Check if VBAT overshoot control should be enabled */
+		if (!di->bm->enable_overshoot)
+			overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
+
+		/* Enable USB Charger */
+		dev_dbg(di->dev,
+			"Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+
+		/* If success power on charging LED indication */
+		ret = ab8500_charger_led_en(di, true);
+		if (ret < 0)
+			dev_err(di->dev, "failed to enable LED\n");
+
+		di->usb.charger_online = 1;
+
+		/* USBChInputCurr: current that can be drawn from the usb */
+		ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max_ua);
+		if (ret) {
+			dev_err(di->dev, "setting USBChInputCurr failed\n");
+			return ret;
+		}
+
+		/* ChOutputCurentLevel: protected output current */
+		ret = ab8500_charger_set_output_curr(di, ich_out_ua);
+		if (ret) {
+			dev_err(di->dev, "%s "
+				"Failed to set ChOutputCurentLevel\n",
+				__func__);
+			return ret;
+		}
+
+		queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
+
+	} else {
+		/* Disable USB charging */
+		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_USBCH_CTRL1_REG, 0);
+		if (ret) {
+			dev_err(di->dev,
+				"%s write failed\n", __func__);
+			return ret;
+		}
+
+		ret = ab8500_charger_led_en(di, false);
+		if (ret < 0)
+			dev_err(di->dev, "failed to disable LED\n");
+		/* USBChInputCurr: current that can be drawn from the usb */
+		ret = ab8500_charger_set_vbus_in_curr(di, 0);
+		if (ret) {
+			dev_err(di->dev, "setting USBChInputCurr failed\n");
+			return ret;
+		}
+
+		/* ChOutputCurentLevel: protected output current */
+		ret = ab8500_charger_set_output_curr(di, 0);
+		if (ret) {
+			dev_err(di->dev, "%s "
+				"Failed to reset ChOutputCurentLevel\n",
+				__func__);
+			return ret;
+		}
+		di->usb.charger_online = 0;
+		di->usb.wd_expired = false;
+
+		/* Disable regulator if enabled */
+		if (di->vddadc_en_usb) {
+			regulator_disable(di->regu);
+			di->vddadc_en_usb = false;
+		}
+
+		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+
+		/* Cancel any pending Vbat check work */
+		cancel_delayed_work(&di->check_vbat_work);
+
+	}
+	ab8500_power_supply_changed(di, di->usb_chg.psy);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_usb_check_enable() - enable usb charging
+ * @charger:	pointer to the ux500_charger structure
+ * @vset_uv:	charging voltage in microvolt
+ * @iset_ua:	charger output current in microampere
+ *
+ * Check if the VBUS charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
+	int vset_uv, int iset_ua)
+{
+	u8 usbch_ctrl1 = 0;
+	int ret = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+	if (!di->usb.charger_connected)
+		return ret;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
+	if (ret < 0) {
+		dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+		return ret;
+	}
+	dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
+
+	if (!(usbch_ctrl1 & USB_CH_ENA)) {
+		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_CHARGER, AB8500_CHARGER_CTRL,
+					DROP_COUNT_RESET, DROP_COUNT_RESET);
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+			return ret;
+		}
+
+		ret = ab8500_charger_usb_en(&di->usb_chg, true, vset_uv, iset_ua);
+		if (ret < 0) {
+			dev_err(di->dev, "Failed to enable VBUS charger %d\n",
+					__LINE__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * ab8500_charger_ac_check_enable() - enable usb charging
+ * @charger:	pointer to the ux500_charger structure
+ * @vset_uv:	charging voltage in microvolt
+ * @iset_ua:	charger output current in micrompere
+ *
+ * Check if the AC charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
+	int vset_uv, int iset_ua)
+{
+	u8 mainch_ctrl1 = 0;
+	int ret = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+	if (!di->ac.charger_connected)
+		return ret;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_MCH_CTRL1, &mainch_ctrl1);
+	if (ret < 0) {
+		dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+		return ret;
+	}
+	dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);
+
+	if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
+		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_CHARGER, AB8500_CHARGER_CTRL,
+					DROP_COUNT_RESET, DROP_COUNT_RESET);
+
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+			return ret;
+		}
+
+		ret = ab8500_charger_ac_en(&di->usb_chg, true, vset_uv, iset_ua);
+		if (ret < 0) {
+			dev_err(di->dev, "failed to enable AC charger %d\n",
+				__LINE__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * ab8500_charger_watchdog_kick() - kick charger watchdog
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Kick charger watchdog
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
+{
+	int ret;
+	struct ab8500_charger *di;
+
+	if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+		di = to_ab8500_charger_ac_device_info(charger);
+	else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+	if (ret)
+		dev_err(di->dev, "Failed to kick WD!\n");
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_update_charger_current() - update charger current
+ * @charger:		pointer to the ab8500_charger structure
+ * @ich_out_ua:		desired output current in microampere
+ *
+ * Update the charger output current for the specified charger
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
+		int ich_out_ua)
+{
+	int ret;
+	struct ab8500_charger *di;
+
+	if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+		di = to_ab8500_charger_ac_device_info(charger);
+	else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	ret = ab8500_charger_set_output_curr(di, ich_out_ua);
+	if (ret) {
+		dev_err(di->dev, "%s "
+			"Failed to set ChOutputCurentLevel\n",
+			__func__);
+		return ret;
+	}
+
+	/* Reset the main and usb drop input current measurement counter */
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_charger *di;
+	union power_supply_propval ret;
+	int j;
+	struct ux500_charger *usb_chg;
+
+	usb_chg = (struct ux500_charger *)data;
+	psy = usb_chg->psy;
+
+	di = to_ab8500_charger_usb_device_info(usb_chg);
+
+	/*
+	 * For all psy where the driver name appears in any supplied_to
+	 * in practice what we will find will always be "ab8500_fg" as
+	 * the fuel gauge is responsible of keeping track of VBAT.
+	 */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				/* This will always be "ab8500_fg" */
+				dev_dbg(di->dev, "get VBAT from %s\n",
+					dev_name(&ext->dev));
+				di->vbat = ret.intval;
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_check_vbat_work() - keep vbus current within spec
+ * @work	pointer to the work_struct structure
+ *
+ * Due to a asic bug it is necessary to lower the input current to the vbus
+ * charger when charging with at some specific levels. This issue is only valid
+ * for below a certain battery voltage. This function makes sure that the
+ * the allowed current limit isn't exceeded.
+ */
+static void ab8500_charger_check_vbat_work(struct work_struct *work)
+{
+	int t = 10;
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_vbat_work.work);
+
+	class_for_each_device(power_supply_class, NULL,
+			      &di->usb_chg, ab8500_charger_get_ext_psy_data);
+
+	/* First run old_vbat is 0. */
+	if (di->old_vbat == 0)
+		di->old_vbat = di->vbat;
+
+	if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
+		di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
+		(di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
+		di->vbat > VBAT_TRESH_IP_CUR_RED))) {
+
+		dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
+			" old: %d\n", di->max_usb_in_curr.usb_type_max_ua,
+			di->vbat, di->old_vbat);
+		ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max_ua);
+		power_supply_changed(di->usb_chg.psy);
+	}
+
+	di->old_vbat = di->vbat;
+
+	/*
+	 * No need to check the battery voltage every second when not close to
+	 * the threshold.
+	 */
+	if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100000) &&
+		(di->vbat > (VBAT_TRESH_IP_CUR_RED - 100000)))
+			t = 1;
+
+	queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
+}
+
+/**
+ * ab8500_charger_check_hw_failure_work() - check main charger failure
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_hw_failure_work.work);
+
+	/* Check if the status bits for HW failure is still active */
+	if (di->flags.mainextchnotok) {
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return;
+		}
+		if (!(reg_value & MAIN_CH_NOK)) {
+			di->flags.mainextchnotok = false;
+			ab8500_power_supply_changed(di, di->ac_chg.psy);
+		}
+	}
+	if (di->flags.vbus_ovv) {
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
+			&reg_value);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return;
+		}
+		if (!(reg_value & VBUS_OVV_TH)) {
+			di->flags.vbus_ovv = false;
+			ab8500_power_supply_changed(di, di->usb_chg.psy);
+		}
+	}
+	/* If we still have a failure, schedule a new check */
+	if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+		queue_delayed_work(di->charger_wq,
+			&di->check_hw_failure_work, round_jiffies(HZ));
+	}
+}
+
+/**
+ * ab8500_charger_kick_watchdog_work() - kick the watchdog
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog.
+ *
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continuously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, kick_wd_work.work);
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+	if (ret)
+		dev_err(di->dev, "Failed to kick WD!\n");
+
+	/* Schedule a new watchdog kick */
+	queue_delayed_work(di->charger_wq,
+		&di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
+}
+
+/**
+ * ab8500_charger_ac_work() - work to get and set main charger status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_ac_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, ac_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if the main charger is
+	 * connected by reading the status register
+	 */
+	ret = ab8500_charger_detect_chargers(di, false);
+	if (ret < 0)
+		return;
+
+	if (ret & AC_PW_CONN) {
+		di->ac.charger_connected = 1;
+		di->ac_conn = true;
+	} else {
+		di->ac.charger_connected = 0;
+	}
+
+	ab8500_power_supply_changed(di, di->ac_chg.psy);
+	sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
+}
+
+static void ab8500_charger_usb_attached_work(struct work_struct *work)
+{
+	struct ab8500_charger *di = container_of(work,
+						 struct ab8500_charger,
+						 usb_charger_attached_work.work);
+	int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
+	int ret, i;
+	u8 statval;
+
+	for (i = 0; i < 10; i++) {
+		ret = abx500_get_register_interruptible(di->dev,
+							AB8500_CHARGER,
+							AB8500_CH_USBCH_STAT1_REG,
+							&statval);
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+			goto reschedule;
+		}
+		if ((statval & usbch) != usbch)
+			goto reschedule;
+
+		msleep(CHARGER_STATUS_POLL);
+	}
+
+	ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);
+
+	mutex_lock(&di->charger_attached_mutex);
+	mutex_unlock(&di->charger_attached_mutex);
+
+	return;
+
+reschedule:
+	queue_delayed_work(di->charger_wq,
+			   &di->usb_charger_attached_work,
+			   HZ);
+}
+
+static void ab8500_charger_ac_attached_work(struct work_struct *work)
+{
+
+	struct ab8500_charger *di = container_of(work,
+						 struct ab8500_charger,
+						 ac_charger_attached_work.work);
+	int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
+		      MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
+	int ret, i;
+	u8 statval;
+
+	for (i = 0; i < 10; i++) {
+		ret = abx500_get_register_interruptible(di->dev,
+							AB8500_CHARGER,
+							AB8500_CH_STATUS2_REG,
+							&statval);
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+			goto reschedule;
+		}
+
+		if ((statval & mainch) != mainch)
+			goto reschedule;
+
+		msleep(CHARGER_STATUS_POLL);
+	}
+
+	ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
+	queue_work(di->charger_wq, &di->ac_work);
+
+	mutex_lock(&di->charger_attached_mutex);
+	mutex_unlock(&di->charger_attached_mutex);
+
+	return;
+
+reschedule:
+	queue_delayed_work(di->charger_wq,
+			   &di->ac_charger_attached_work,
+			   HZ);
+}
+
+/**
+ * ab8500_charger_detect_usb_type_work() - work to detect USB type
+ * @work:	Pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, detect_usb_type_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if is
+	 * connected by reading the status register
+	 */
+	ret = ab8500_charger_detect_chargers(di, false);
+	if (ret < 0)
+		return;
+
+	if (!(ret & USB_PW_CONN)) {
+		dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
+		di->vbus_detected = false;
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, di->usb_chg.psy);
+	} else {
+		dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
+		di->vbus_detected = true;
+
+		if (is_ab8500_1p1_or_earlier(di->parent)) {
+			ret = ab8500_charger_detect_usb_type(di);
+			if (!ret) {
+				ab8500_charger_set_usb_connected(di, true);
+				ab8500_power_supply_changed(di,
+							    di->usb_chg.psy);
+			}
+		} else {
+			/*
+			 * For ABB cut2.0 and onwards we have an IRQ,
+			 * USB_LINK_STATUS that will be triggered when the USB
+			 * link status changes. The exception is USB connected
+			 * during startup. Then we don't get a
+			 * USB_LINK_STATUS IRQ
+			 */
+			if (di->vbus_detected_start) {
+				di->vbus_detected_start = false;
+				ret = ab8500_charger_detect_usb_type(di);
+				if (!ret) {
+					ab8500_charger_set_usb_connected(di,
+						true);
+					ab8500_power_supply_changed(di,
+						di->usb_chg.psy);
+				}
+			}
+		}
+	}
+}
+
+/**
+ * ab8500_charger_usb_link_attach_work() - work to detect USB type
+ * @work:	pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+	struct ab8500_charger *di =
+		container_of(work, struct ab8500_charger, attach_work.work);
+	int ret;
+
+	/* Update maximum input current if USB enumeration is not detected */
+	if (!di->usb.charger_online) {
+		ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max_ua);
+		if (ret)
+			return;
+	}
+
+	ab8500_charger_set_usb_connected(di, true);
+	ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_usb_link_status_work() - work to detect USB type
+ * @work:	pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_status_work(struct work_struct *work)
+{
+	int detected_chargers;
+	int ret;
+	u8 val;
+	u8 link_status;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, usb_link_status_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if  is
+	 * connected by reading the status register
+	 */
+	detected_chargers = ab8500_charger_detect_chargers(di, false);
+	if (detected_chargers < 0)
+		return;
+
+	/*
+	 * Some chargers that breaks the USB spec is
+	 * identified as invalid by AB8500 and it refuse
+	 * to start the charging process. but by jumping
+	 * through a few hoops it can be forced to start.
+	 */
+	if (is_ab8500(di->parent))
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+					AB8500_USB_LINE_STAT_REG, &val);
+	else
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+					AB8500_USB_LINK1_STAT_REG, &val);
+
+	if (ret >= 0)
+		dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
+	else
+		dev_dbg(di->dev, "Error reading USB link status\n");
+
+	if (is_ab8500(di->parent))
+		link_status = AB8500_USB_LINK_STATUS;
+	else
+		link_status = AB8505_USB_LINK_STATUS;
+
+	if (detected_chargers & USB_PW_CONN) {
+		if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
+				USB_STAT_NOT_VALID_LINK &&
+				di->invalid_charger_detect_state == 0) {
+			dev_dbg(di->dev,
+					"Invalid charger detected, state= 0\n");
+			/*Enable charger*/
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
+					USB_CH_ENA, USB_CH_ENA);
+			/*Enable charger detection*/
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, USB_CH_DET);
+			di->invalid_charger_detect_state = 1;
+			/*exit and wait for new link status interrupt.*/
+			return;
+
+		}
+		if (di->invalid_charger_detect_state == 1) {
+			dev_dbg(di->dev,
+					"Invalid charger detected, state= 1\n");
+			/*Stop charger detection*/
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, 0x00);
+			/*Check link status*/
+			if (is_ab8500(di->parent))
+				ret = abx500_get_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_STAT_REG,
+					&val);
+			else
+				ret = abx500_get_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINK1_STAT_REG,
+					&val);
+
+			dev_dbg(di->dev, "USB link status= 0x%02x\n",
+				(val & link_status) >> USB_LINK_STATUS_SHIFT);
+			di->invalid_charger_detect_state = 2;
+		}
+	} else {
+		di->invalid_charger_detect_state = 0;
+	}
+
+	if (!(detected_chargers & USB_PW_CONN)) {
+		di->vbus_detected = false;
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, di->usb_chg.psy);
+		return;
+	}
+
+	dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
+	di->vbus_detected = true;
+	ret = ab8500_charger_read_usb_type(di);
+	if (ret) {
+		if (ret == -ENXIO) {
+			/* No valid charger type detected */
+			ab8500_charger_set_usb_connected(di, false);
+			ab8500_power_supply_changed(di, di->usb_chg.psy);
+		}
+		return;
+	}
+
+	if (di->usb_device_is_unrecognised) {
+		dev_dbg(di->dev,
+			"Potential Legacy Charger device. "
+			"Delay work for %d msec for USB enum "
+			"to finish",
+			WAIT_ACA_RID_ENUMERATION);
+		queue_delayed_work(di->charger_wq,
+				   &di->attach_work,
+				   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+	} else if (di->is_aca_rid == 1) {
+		/* Only wait once */
+		di->is_aca_rid++;
+		dev_dbg(di->dev,
+			"%s Wait %d msec for USB enum to finish",
+			__func__, WAIT_ACA_RID_ENUMERATION);
+		queue_delayed_work(di->charger_wq,
+				   &di->attach_work,
+				   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+	} else {
+		queue_delayed_work(di->charger_wq,
+				   &di->attach_work,
+				   0);
+	}
+}
+
+static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
+{
+	int ret;
+	unsigned long flags;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, usb_state_changed_work.work);
+
+	if (!di->vbus_detected)	{
+		dev_dbg(di->dev,
+			"%s !di->vbus_detected\n",
+			__func__);
+		return;
+	}
+
+	spin_lock_irqsave(&di->usb_state.usb_lock, flags);
+	di->usb_state.state = di->usb_state.state_tmp;
+	di->usb_state.usb_current_ua = di->usb_state.usb_current_tmp_ua;
+	spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
+
+	dev_dbg(di->dev, "%s USB state: 0x%02x uA: %d\n",
+		__func__, di->usb_state.state, di->usb_state.usb_current_ua);
+
+	switch (di->usb_state.state) {
+	case AB8500_BM_USB_STATE_RESET_HS:
+	case AB8500_BM_USB_STATE_RESET_FS:
+	case AB8500_BM_USB_STATE_SUSPEND:
+	case AB8500_BM_USB_STATE_MAX:
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, di->usb_chg.psy);
+		break;
+
+	case AB8500_BM_USB_STATE_RESUME:
+		/*
+		 * when suspend->resume there should be delay
+		 * of 1sec for enabling charging
+		 */
+		msleep(1000);
+		fallthrough;
+	case AB8500_BM_USB_STATE_CONFIGURED:
+		/*
+		 * USB is configured, enable charging with the charging
+		 * input current obtained from USB driver
+		 */
+		if (!ab8500_charger_get_usb_cur(di)) {
+			/* Update maximum input current */
+			ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max_ua);
+			if (ret)
+				return;
+
+			ab8500_charger_set_usb_connected(di, true);
+			ab8500_power_supply_changed(di, di->usb_chg.psy);
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB charger Not OK status
+ */
+static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+	bool prev_status;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_usbchgnotok_work.work);
+
+	/* Check if the status bit for usbchargernotok is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	prev_status = di->flags.usbchargernotok;
+
+	if (reg_value & VBUS_CH_NOK) {
+		di->flags.usbchargernotok = true;
+		/* Check again in 1sec */
+		queue_delayed_work(di->charger_wq,
+			&di->check_usbchgnotok_work, HZ);
+	} else {
+		di->flags.usbchargernotok = false;
+		di->flags.vbus_collapse = false;
+	}
+
+	if (prev_status != di->flags.usbchargernotok)
+		ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the Main thermal prot status
+ */
+static void ab8500_charger_check_main_thermal_prot_work(
+	struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_main_thermal_prot_work);
+
+	/* Check if the status bit for main_thermal_prot is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if (reg_value & MAIN_CH_TH_PROT)
+		di->flags.main_thermal_prot = true;
+	else
+		di->flags.main_thermal_prot = false;
+
+	ab8500_power_supply_changed(di, di->ac_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB thermal prot status
+ */
+static void ab8500_charger_check_usb_thermal_prot_work(
+	struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_usb_thermal_prot_work);
+
+	/* Check if the status bit for usb_thermal_prot is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if (reg_value & USB_CH_TH_PROT)
+		di->flags.usb_thermal_prot = true;
+	else
+		di->flags.usb_thermal_prot = false;
+
+	ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger unplugged\n");
+	queue_work(di->charger_wq, &di->ac_work);
+
+	cancel_delayed_work_sync(&di->ac_charger_attached_work);
+	mutex_lock(&di->charger_attached_mutex);
+	mutex_unlock(&di->charger_attached_mutex);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchplugdet_handler() - main charger plugged
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger plugged\n");
+	queue_work(di->charger_wq, &di->ac_work);
+
+	mutex_lock(&di->charger_attached_mutex);
+	mutex_unlock(&di->charger_attached_mutex);
+
+	if (is_ab8500(di->parent))
+		queue_delayed_work(di->charger_wq,
+			   &di->ac_charger_attached_work,
+			   HZ);
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainextchnotok_handler() - main charger not ok
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger not ok\n");
+	di->flags.mainextchnotok = true;
+	ab8500_power_supply_changed(di, di->ac_chg.psy);
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp above Main charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp ok for Main charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
+{
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, vbus_drop_end_work.work);
+	int ret, curr_ua;
+	u8 reg_value;
+
+	di->flags.vbus_drop_end = false;
+
+	/* Reset the drop counter */
+	abx500_set_register_interruptible(di->dev,
+				  AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s read failed\n", __func__);
+		return;
+	}
+
+	curr_ua = ab8500_charge_input_curr_map[
+		reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
+
+	if (di->max_usb_in_curr.calculated_max_ua != curr_ua) {
+		/* USB source is collapsing */
+		di->max_usb_in_curr.calculated_max_ua = curr_ua;
+		dev_dbg(di->dev,
+			 "VBUS input current limiting to %d uA\n",
+			 di->max_usb_in_curr.calculated_max_ua);
+	} else {
+		/*
+		 * USB source can not give more than this amount.
+		 * Taking more will collapse the source.
+		 */
+		di->max_usb_in_curr.set_max_ua =
+			di->max_usb_in_curr.calculated_max_ua;
+		dev_dbg(di->dev,
+			 "VBUS input current limited to %d uA\n",
+			 di->max_usb_in_curr.set_max_ua);
+	}
+
+	if (di->usb.charger_connected)
+		ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max_ua);
+}
+
+/**
+ * ab8500_charger_vbusdetf_handler() - VBUS falling detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	di->vbus_detected = false;
+	dev_dbg(di->dev, "VBUS falling detected\n");
+	queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetr_handler() - VBUS rising detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	di->vbus_detected = true;
+	dev_dbg(di->dev, "VBUS rising detected\n");
+
+	queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usblinkstatus_handler() - USB link status has changed
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "USB link status changed\n");
+
+	queue_work(di->charger_wq, &di->usb_link_status_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp above USB charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp ok for USB charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Not allowed USB charger detected\n");
+	queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_chwdexp_handler() - Charger watchdog expired
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Charger watchdog expired\n");
+
+	/*
+	 * The charger that was online when the watchdog expired
+	 * needs to be restarted for charging to start again
+	 */
+	if (di->ac.charger_online) {
+		di->ac.wd_expired = true;
+		ab8500_power_supply_changed(di, di->ac_chg.psy);
+	}
+	if (di->usb.charger_online) {
+		di->usb.wd_expired = true;
+		ab8500_power_supply_changed(di, di->usb_chg.psy);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "VBUS charger drop ended\n");
+	di->flags.vbus_drop_end = true;
+
+	/*
+	 * VBUS might have dropped due to bad connection.
+	 * Schedule a new input limit set to the value SW requests.
+	 */
+	queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
+			   round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ));
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "VBUS overvoltage detected\n");
+	di->flags.vbus_ovv = true;
+	ab8500_power_supply_changed(di, di->usb_chg.psy);
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_ac_get_property() - get the ac/mains properties
+ * @psy:       pointer to the power_supply structure
+ * @psp:       pointer to the power_supply_property structure
+ * @val:       pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the ac/mains
+ * properties by reading the sysfs files.
+ * AC/Mains properties are online, present and voltage.
+ * online:     ac/mains charging is in progress or not
+ * present:    presence of the ac/mains
+ * voltage:    AC/Mains voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_ac_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_charger *di;
+	int ret;
+
+	di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->flags.mainextchnotok)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (di->ac.wd_expired || di->usb.wd_expired)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (di->flags.main_thermal_prot)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = di->ac.charger_online;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = di->ac.charger_connected;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ab8500_charger_get_ac_voltage(di);
+		if (ret >= 0)
+			di->ac.charger_voltage_uv = ret;
+		/* On error, use previous value */
+		val->intval = di->ac.charger_voltage_uv;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to indicate when CV mode is entered
+		 * for the AC charger
+		 */
+		di->ac.cv_active = ab8500_charger_ac_cv(di);
+		val->intval = di->ac.cv_active;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ab8500_charger_get_ac_current(di);
+		if (ret >= 0)
+			di->ac.charger_current_ua = ret;
+		val->intval = di->ac.charger_current_ua;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_usb_get_property() - get the usb properties
+ * @psy:        pointer to the power_supply structure
+ * @psp:        pointer to the power_supply_property structure
+ * @val:        pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the usb
+ * properties by reading the sysfs files.
+ * USB properties are online, present and voltage.
+ * online:     usb charging is in progress or not
+ * present:    presence of the usb
+ * voltage:    vbus voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_charger *di;
+	int ret;
+
+	di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->flags.usbchargernotok)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (di->ac.wd_expired || di->usb.wd_expired)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (di->flags.usb_thermal_prot)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (di->flags.vbus_ovv)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = di->usb.charger_online;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = di->usb.charger_connected;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ab8500_charger_get_vbus_voltage(di);
+		if (ret >= 0)
+			di->usb.charger_voltage_uv = ret;
+		val->intval = di->usb.charger_voltage_uv;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to indicate when CV mode is entered
+		 * for the USB charger
+		 */
+		di->usb.cv_active = ab8500_charger_usb_cv(di);
+		val->intval = di->usb.cv_active;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ab8500_charger_get_usb_current(di);
+		if (ret >= 0)
+			di->usb.charger_current_ua = ret;
+		val->intval = di->usb.charger_current_ua;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		/*
+		 * This property is used to indicate when VBUS has collapsed
+		 * due to too high output current from the USB charger
+		 */
+		if (di->flags.vbus_collapse)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_init_hw_registers() - Set up charger related registers
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Set up charger OVV, watchdog and maximum voltage registers as well as
+ * charging of the backup battery
+ */
+static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
+{
+	int ret = 0;
+
+	/* Setup maximum charger current and voltage for ABB cut2.0 */
+	if (!is_ab8500_1p1_or_earlier(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to set CH_VOLT_LVL_MAX_REG\n");
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+			CH_OP_CUR_LVL_1P6);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to set CH_OPT_CRNTLVL_MAX_REG\n");
+			goto out;
+		}
+	}
+
+	if (is_ab8505_2p0(di->parent))
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_USBCH_CTRL2_REG,
+			VBUS_AUTO_IN_CURR_LIM_ENA,
+			VBUS_AUTO_IN_CURR_LIM_ENA);
+	else
+		/*
+		 * VBUS OVV set to 6.3V and enable automatic current limitation
+		 */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_USBCH_CTRL2_REG,
+			VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+	if (ret) {
+		dev_err(di->dev,
+			"failed to set automatic current limitation\n");
+		goto out;
+	}
+
+	/* Enable main watchdog in OTP */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
+	if (ret) {
+		dev_err(di->dev, "failed to enable main WD in OTP\n");
+		goto out;
+	}
+
+	/* Enable main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
+	if (ret) {
+		dev_err(di->dev, "failed to enable main watchdog\n");
+		goto out;
+	}
+
+	/*
+	 * Due to internal synchronisation, Enable and Kick watchdog bits
+	 * cannot be enabled in a single write.
+	 * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
+	 * between writing Enable then Kick bits.
+	 */
+	udelay(63);
+
+	/* Kick main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG,
+		(MAIN_WDOG_ENA | MAIN_WDOG_KICK));
+	if (ret) {
+		dev_err(di->dev, "failed to kick main watchdog\n");
+		goto out;
+	}
+
+	/* Disable main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
+	if (ret) {
+		dev_err(di->dev, "failed to disable main watchdog\n");
+		goto out;
+	}
+
+	/* Set watchdog timeout */
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_WD_TIMER_REG, WD_TIMER);
+	if (ret) {
+		dev_err(di->dev, "failed to set charger watchdog timeout\n");
+		goto out;
+	}
+
+	ret = ab8500_charger_led_en(di, false);
+	if (ret < 0) {
+		dev_err(di->dev, "failed to disable LED\n");
+		goto out;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_RTC,
+		AB8500_RTC_BACKUP_CHG_REG,
+		(di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i);
+	if (ret) {
+		dev_err(di->dev, "failed to setup backup battery charging\n");
+		goto out;
+	}
+
+	/* Enable backup battery charging */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_RTC, AB8500_RTC_CTRL_REG,
+		RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
+	if (ret < 0) {
+		dev_err(di->dev, "%s mask and set failed\n", __func__);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * ab8500 charger driver interrupts and their respective isr
+ */
+static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
+	{"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
+	{"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
+	{"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
+	{"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
+	{"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
+	{"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
+	{"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
+	{"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
+	{"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
+	{"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
+	{"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
+	{"VBUS_OVV", ab8500_charger_vbusovv_handler},
+	{"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+	{"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
+};
+
+static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
+		unsigned long event, void *power)
+{
+	struct ab8500_charger *di =
+		container_of(nb, struct ab8500_charger, nb);
+	enum ab8500_usb_state bm_usb_state;
+	/*
+	 * FIXME: it appears the AB8500 PHY never sends what it should here.
+	 * Fix the PHY driver to properly notify the desired current.
+	 * Also broadcast microampere and not milliampere.
+	 */
+	unsigned mA = *((unsigned *)power);
+
+	if (event != USB_EVENT_VBUS) {
+		dev_dbg(di->dev, "not a standard host, returning\n");
+		return NOTIFY_DONE;
+	}
+
+	/* TODO: State is fabricate  here. See if charger really needs USB
+	 * state or if mA is enough
+	 */
+	if ((di->usb_state.usb_current_ua == 2000) && (mA > 2))
+		bm_usb_state = AB8500_BM_USB_STATE_RESUME;
+	else if (mA == 0)
+		bm_usb_state = AB8500_BM_USB_STATE_RESET_HS;
+	else if (mA == 2)
+		bm_usb_state = AB8500_BM_USB_STATE_SUSPEND;
+	else if (mA >= 8) /* 8, 100, 500 */
+		bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED;
+	else /* Should never occur */
+		bm_usb_state = AB8500_BM_USB_STATE_RESET_FS;
+
+	dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n",
+		__func__, bm_usb_state, mA);
+
+	spin_lock(&di->usb_state.usb_lock);
+	di->usb_state.state_tmp = bm_usb_state;
+	/* FIXME: broadcast ua instead, see above */
+	di->usb_state.usb_current_tmp_ua = mA * 1000;
+	spin_unlock(&di->usb_state.usb_lock);
+
+	/*
+	 * wait for some time until you get updates from the usb stack
+	 * and negotiations are completed
+	 */
+	queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2);
+
+	return NOTIFY_OK;
+}
+
+static int __maybe_unused ab8500_charger_resume(struct device *dev)
+{
+	int ret;
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+
+	/*
+	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+	 * logic. That means we have to continuously kick the charger
+	 * watchdog even when no charger is connected. This is only
+	 * valid once the AC charger has been enabled. This is
+	 * a bug that is not handled by the algorithm and the
+	 * watchdog have to be kicked by the charger driver
+	 * when the AC charger is disabled
+	 */
+	if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+		if (ret)
+			dev_err(di->dev, "Failed to kick WD!\n");
+
+		/* If not already pending start a new timer */
+		queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+				   round_jiffies(WD_KICK_INTERVAL));
+	}
+
+	/* If we still have a HW failure, schedule a new check */
+	if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+		queue_delayed_work(di->charger_wq,
+			&di->check_hw_failure_work, 0);
+	}
+
+	if (di->flags.vbus_drop_end)
+		queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0);
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_charger_suspend(struct device *dev)
+{
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+
+	/* Cancel any pending jobs */
+	cancel_delayed_work(&di->check_hw_failure_work);
+	cancel_delayed_work(&di->vbus_drop_end_work);
+
+	flush_delayed_work(&di->attach_work);
+	flush_delayed_work(&di->usb_charger_attached_work);
+	flush_delayed_work(&di->ac_charger_attached_work);
+	flush_delayed_work(&di->check_usbchgnotok_work);
+	flush_delayed_work(&di->check_vbat_work);
+	flush_delayed_work(&di->kick_wd_work);
+
+	flush_work(&di->usb_link_status_work);
+	flush_work(&di->ac_work);
+	flush_work(&di->detect_usb_type_work);
+
+	if (atomic_read(&di->current_stepping_sessions))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_fg",
+	"ab8500_btemp",
+};
+
+static const struct power_supply_desc ab8500_ac_chg_desc = {
+	.name		= "ab8500_ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= ab8500_charger_ac_props,
+	.num_properties	= ARRAY_SIZE(ab8500_charger_ac_props),
+	.get_property	= ab8500_charger_ac_get_property,
+};
+
+static const struct power_supply_desc ab8500_usb_chg_desc = {
+	.name		= "ab8500_usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= ab8500_charger_usb_props,
+	.num_properties	= ARRAY_SIZE(ab8500_charger_usb_props),
+	.get_property	= ab8500_charger_usb_get_property,
+};
+
+static int ab8500_charger_bind(struct device *dev)
+{
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+	int ch_stat;
+	int ret;
+
+	/* Create a work queue for the charger */
+	di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
+						 WQ_MEM_RECLAIM);
+	if (di->charger_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	ch_stat = ab8500_charger_detect_chargers(di, false);
+
+	if (ch_stat & AC_PW_CONN) {
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->ac_charger_attached_work,
+					   HZ);
+	}
+	if (ch_stat & USB_PW_CONN) {
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->usb_charger_attached_work,
+					   HZ);
+		di->vbus_detected = true;
+		di->vbus_detected_start = true;
+		queue_work(di->charger_wq,
+			   &di->detect_usb_type_work);
+	}
+
+	ret = component_bind_all(dev, di);
+	if (ret) {
+		dev_err(dev, "can't bind component devices\n");
+		destroy_workqueue(di->charger_wq);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ab8500_charger_unbind(struct device *dev)
+{
+	struct ab8500_charger *di = dev_get_drvdata(dev);
+	int ret;
+
+	/* Disable AC charging */
+	ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);
+
+	/* Disable USB charging */
+	ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);
+
+	/* Backup battery voltage and current disable */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
+	if (ret < 0)
+		dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->charger_wq);
+
+	/* Unbind fg, btemp, algorithm */
+	component_unbind_all(dev, di);
+}
+
+static const struct component_master_ops ab8500_charger_comp_ops = {
+	.bind = ab8500_charger_bind,
+	.unbind = ab8500_charger_unbind,
+};
+
+static struct platform_driver *const ab8500_charger_component_drivers[] = {
+	&ab8500_fg_driver,
+	&ab8500_btemp_driver,
+	&ab8500_chargalg_driver,
+};
+
+static int ab8500_charger_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct component_match *match = NULL;
+	struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {};
+	struct ab8500_charger *di;
+	int charger_status;
+	int i, irq;
+	int ret;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+
+	/* get parent data */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	/* Get ADC channels */
+	if (!is_ab8505(di->parent)) {
+		di->adc_main_charger_v = devm_iio_channel_get(dev, "main_charger_v");
+		if (IS_ERR(di->adc_main_charger_v)) {
+			ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_v),
+					    "failed to get ADC main charger voltage\n");
+			return ret;
+		}
+		di->adc_main_charger_c = devm_iio_channel_get(dev, "main_charger_c");
+		if (IS_ERR(di->adc_main_charger_c)) {
+			ret = dev_err_probe(dev, PTR_ERR(di->adc_main_charger_c),
+					    "failed to get ADC main charger current\n");
+			return ret;
+		}
+	}
+	di->adc_vbus_v = devm_iio_channel_get(dev, "vbus_v");
+	if (IS_ERR(di->adc_vbus_v)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->adc_vbus_v),
+				    "failed to get ADC USB charger voltage\n");
+		return ret;
+	}
+	di->adc_usb_charger_c = devm_iio_channel_get(dev, "usb_charger_c");
+	if (IS_ERR(di->adc_usb_charger_c)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->adc_usb_charger_c),
+				    "failed to get ADC USB charger current\n");
+		return ret;
+	}
+
+	/*
+	 * VDD ADC supply needs to be enabled from this driver when there
+	 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+	 * interrupts during charging
+	 */
+	di->regu = devm_regulator_get(dev, "vddadc");
+	if (IS_ERR(di->regu)) {
+		ret = PTR_ERR(di->regu);
+		dev_err(dev, "failed to get vddadc regulator\n");
+		return ret;
+	}
+
+	/* Request interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		if (irq < 0)
+			return irq;
+
+		ret = devm_request_threaded_irq(dev,
+			irq, NULL, ab8500_charger_irq[i].isr,
+			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			ab8500_charger_irq[i].name, di);
+
+		if (ret != 0) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n"
+				, ab8500_charger_irq[i].name, irq, ret);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_charger_irq[i].name, irq, ret);
+	}
+
+	/* initialize lock */
+	spin_lock_init(&di->usb_state.usb_lock);
+	mutex_init(&di->usb_ipt_crnt_lock);
+
+	di->autopower = false;
+	di->invalid_charger_detect_state = 0;
+
+	/* AC and USB supply config */
+	ac_psy_cfg.of_node = np;
+	ac_psy_cfg.supplied_to = supply_interface;
+	ac_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	ac_psy_cfg.drv_data = &di->ac_chg;
+	usb_psy_cfg.of_node = np;
+	usb_psy_cfg.supplied_to = supply_interface;
+	usb_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	usb_psy_cfg.drv_data = &di->usb_chg;
+
+	/* AC supply */
+	/* ux500_charger sub-class */
+	di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+	di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
+	di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+	di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+	di->ac_chg.max_out_volt_uv = ab8500_charger_voltage_map[
+		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+	di->ac_chg.max_out_curr_ua =
+		ab8500_charge_output_curr_map[ARRAY_SIZE(ab8500_charge_output_curr_map) - 1];
+	di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
+	/*
+	 * The AB8505 only supports USB charging. If we are not the
+	 * AB8505, register an AC charger.
+	 *
+	 * TODO: if this should be opt-in, add DT properties for this.
+	 */
+	if (!is_ab8505(di->parent))
+		di->ac_chg.enabled = true;
+
+	/* USB supply */
+	/* ux500_charger sub-class */
+	di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+	di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
+	di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+	di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+	di->usb_chg.max_out_volt_uv = ab8500_charger_voltage_map[
+		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+	di->usb_chg.max_out_curr_ua =
+		ab8500_charge_output_curr_map[ARRAY_SIZE(ab8500_charge_output_curr_map) - 1];
+	di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
+	di->usb_state.usb_current_ua = -1;
+
+	mutex_init(&di->charger_attached_mutex);
+
+	/* Init work for HW failure check */
+	INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
+		ab8500_charger_check_hw_failure_work);
+	INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
+		ab8500_charger_check_usbchargernotok_work);
+
+	INIT_DELAYED_WORK(&di->ac_charger_attached_work,
+			  ab8500_charger_ac_attached_work);
+	INIT_DELAYED_WORK(&di->usb_charger_attached_work,
+			  ab8500_charger_usb_attached_work);
+
+	/*
+	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+	 * logic. That means we have to continuously kick the charger
+	 * watchdog even when no charger is connected. This is only
+	 * valid once the AC charger has been enabled. This is
+	 * a bug that is not handled by the algorithm and the
+	 * watchdog have to be kicked by the charger driver
+	 * when the AC charger is disabled
+	 */
+	INIT_DEFERRABLE_WORK(&di->kick_wd_work,
+		ab8500_charger_kick_watchdog_work);
+
+	INIT_DEFERRABLE_WORK(&di->check_vbat_work,
+		ab8500_charger_check_vbat_work);
+
+	INIT_DELAYED_WORK(&di->attach_work,
+		ab8500_charger_usb_link_attach_work);
+
+	INIT_DELAYED_WORK(&di->usb_state_changed_work,
+		ab8500_charger_usb_state_changed_work);
+
+	INIT_DELAYED_WORK(&di->vbus_drop_end_work,
+		ab8500_charger_vbus_drop_end_work);
+
+	/* Init work for charger detection */
+	INIT_WORK(&di->usb_link_status_work,
+		ab8500_charger_usb_link_status_work);
+	INIT_WORK(&di->ac_work, ab8500_charger_ac_work);
+	INIT_WORK(&di->detect_usb_type_work,
+		ab8500_charger_detect_usb_type_work);
+
+	/* Init work for checking HW status */
+	INIT_WORK(&di->check_main_thermal_prot_work,
+		ab8500_charger_check_main_thermal_prot_work);
+	INIT_WORK(&di->check_usb_thermal_prot_work,
+		ab8500_charger_check_usb_thermal_prot_work);
+
+
+	/* Initialize OVV, and other registers */
+	ret = ab8500_charger_init_hw_registers(di);
+	if (ret) {
+		dev_err(dev, "failed to initialize ABB registers\n");
+		return ret;
+	}
+
+	/* Register AC charger class */
+	if (di->ac_chg.enabled) {
+		di->ac_chg.psy = devm_power_supply_register(dev,
+						       &ab8500_ac_chg_desc,
+						       &ac_psy_cfg);
+		if (IS_ERR(di->ac_chg.psy)) {
+			dev_err(dev, "failed to register AC charger\n");
+			return PTR_ERR(di->ac_chg.psy);
+		}
+	}
+
+	/* Register USB charger class */
+	di->usb_chg.psy = devm_power_supply_register(dev,
+						     &ab8500_usb_chg_desc,
+						     &usb_psy_cfg);
+	if (IS_ERR(di->usb_chg.psy)) {
+		dev_err(dev, "failed to register USB charger\n");
+		return PTR_ERR(di->usb_chg.psy);
+	}
+
+	/*
+	 * Check what battery we have, since we always have the USB
+	 * psy, use that as a handle.
+	 */
+	ret = ab8500_bm_of_probe(di->usb_chg.psy, di->bm);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to get battery information\n");
+
+	/* Identify the connected charger types during startup */
+	charger_status = ab8500_charger_detect_chargers(di, true);
+	if (charger_status & AC_PW_CONN) {
+		di->ac.charger_connected = 1;
+		di->ac_conn = true;
+		ab8500_power_supply_changed(di, di->ac_chg.psy);
+		sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	/* Create something that will match the subdrivers when we bind */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_component_drivers); i++) {
+		struct device_driver *drv = &ab8500_charger_component_drivers[i]->driver;
+		struct device *p = NULL, *d;
+
+		while ((d = platform_find_device_by_driver(p, drv))) {
+			put_device(p);
+			component_match_add(dev, &match, component_compare_dev, d);
+			p = d;
+		}
+		put_device(p);
+	}
+	if (!match) {
+		dev_err(dev, "no matching components\n");
+		ret = -ENODEV;
+		goto remove_ab8500_bm;
+	}
+	if (IS_ERR(match)) {
+		dev_err(dev, "could not create component match\n");
+		ret = PTR_ERR(match);
+		goto remove_ab8500_bm;
+	}
+
+	di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(di->usb_phy)) {
+		dev_err(dev, "failed to get usb transceiver\n");
+		ret = -EINVAL;
+		goto remove_ab8500_bm;
+	}
+	di->nb.notifier_call = ab8500_charger_usb_notifier_call;
+	ret = usb_register_notifier(di->usb_phy, &di->nb);
+	if (ret) {
+		dev_err(dev, "failed to register usb notifier\n");
+		goto put_usb_phy;
+	}
+
+	ret = component_master_add_with_match(&pdev->dev,
+					      &ab8500_charger_comp_ops,
+					      match);
+	if (ret) {
+		dev_err(dev, "failed to add component master\n");
+		goto free_notifier;
+	}
+
+	return 0;
+
+free_notifier:
+	usb_unregister_notifier(di->usb_phy, &di->nb);
+put_usb_phy:
+	usb_put_phy(di->usb_phy);
+remove_ab8500_bm:
+	ab8500_bm_of_remove(di->usb_chg.psy, di->bm);
+	return ret;
+}
+
+static int ab8500_charger_remove(struct platform_device *pdev)
+{
+	struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+	component_master_del(&pdev->dev, &ab8500_charger_comp_ops);
+
+	usb_unregister_notifier(di->usb_phy, &di->nb);
+	ab8500_bm_of_remove(di->usb_chg.psy, di->bm);
+	usb_put_phy(di->usb_phy);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_charger_pm_ops, ab8500_charger_suspend, ab8500_charger_resume);
+
+static const struct of_device_id ab8500_charger_match[] = {
+	{ .compatible = "stericsson,ab8500-charger", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ab8500_charger_match);
+
+static struct platform_driver ab8500_charger_driver = {
+	.probe = ab8500_charger_probe,
+	.remove = ab8500_charger_remove,
+	.driver = {
+		.name = "ab8500-charger",
+		.of_match_table = ab8500_charger_match,
+		.pm = &ab8500_charger_pm_ops,
+	},
+};
+
+static int __init ab8500_charger_init(void)
+{
+	int ret;
+
+	ret = platform_register_drivers(ab8500_charger_component_drivers,
+			ARRAY_SIZE(ab8500_charger_component_drivers));
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&ab8500_charger_driver);
+	if (ret) {
+		platform_unregister_drivers(ab8500_charger_component_drivers,
+				ARRAY_SIZE(ab8500_charger_component_drivers));
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit ab8500_charger_exit(void)
+{
+	platform_unregister_drivers(ab8500_charger_component_drivers,
+			ARRAY_SIZE(ab8500_charger_component_drivers));
+	platform_driver_unregister(&ab8500_charger_driver);
+}
+
+module_init(ab8500_charger_init);
+module_exit(ab8500_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-charger");
+MODULE_DESCRIPTION("AB8500 charger management driver");
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
new file mode 100644
index 000000000..71ce28eed
--- /dev/null
+++ b/drivers/power/supply/ab8500_fg.c
@@ -0,0 +1,3263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson AB 2012
+ *
+ * Main and Back-up battery management driver.
+ *
+ * Note: Backup battery management is required in case of Li-Ion battery and not
+ * for capacitive battery. HREF boards have capacitive battery and hence backup
+ * battery management is not used and the supported code is available in this
+ * driver.
+ *
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/component.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/time64.h>
+#include <linux/of.h>
+#include <linux/completion.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/iio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/fixp-arith.h>
+
+#include "ab8500-bm.h"
+
+#define FG_LSB_IN_MA			1627
+#define QLSB_NANO_AMP_HOURS_X10		1071
+#define INS_CURR_TIMEOUT		(3 * HZ)
+
+#define SEC_TO_SAMPLE(S)		(S * 4)
+
+#define NBR_AVG_SAMPLES			20
+#define WAIT_FOR_INST_CURRENT_MAX	70
+/* Currents higher than -500mA (dissipating) will make compensation unstable */
+#define IGNORE_VBAT_HIGHCUR		-500000
+
+#define LOW_BAT_CHECK_INTERVAL		(HZ / 16) /* 62.5 ms */
+
+#define VALID_CAPACITY_SEC		(45 * 60) /* 45 minutes */
+#define BATT_OK_MIN			2360 /* mV */
+#define BATT_OK_INCREMENT		50 /* mV */
+#define BATT_OK_MAX_NR_INCREMENTS	0xE
+
+/* FG constants */
+#define BATT_OVV			0x01
+
+/**
+ * struct ab8500_fg_interrupts - ab8500 fg interrupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_fg_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+enum ab8500_fg_discharge_state {
+	AB8500_FG_DISCHARGE_INIT,
+	AB8500_FG_DISCHARGE_INITMEASURING,
+	AB8500_FG_DISCHARGE_INIT_RECOVERY,
+	AB8500_FG_DISCHARGE_RECOVERY,
+	AB8500_FG_DISCHARGE_READOUT_INIT,
+	AB8500_FG_DISCHARGE_READOUT,
+	AB8500_FG_DISCHARGE_WAKEUP,
+};
+
+static char *discharge_state[] = {
+	"DISCHARGE_INIT",
+	"DISCHARGE_INITMEASURING",
+	"DISCHARGE_INIT_RECOVERY",
+	"DISCHARGE_RECOVERY",
+	"DISCHARGE_READOUT_INIT",
+	"DISCHARGE_READOUT",
+	"DISCHARGE_WAKEUP",
+};
+
+enum ab8500_fg_charge_state {
+	AB8500_FG_CHARGE_INIT,
+	AB8500_FG_CHARGE_READOUT,
+};
+
+static char *charge_state[] = {
+	"CHARGE_INIT",
+	"CHARGE_READOUT",
+};
+
+enum ab8500_fg_calibration_state {
+	AB8500_FG_CALIB_INIT,
+	AB8500_FG_CALIB_WAIT,
+	AB8500_FG_CALIB_END,
+};
+
+struct ab8500_fg_avg_cap {
+	int avg;
+	int samples[NBR_AVG_SAMPLES];
+	time64_t time_stamps[NBR_AVG_SAMPLES];
+	int pos;
+	int nbr_samples;
+	int sum;
+};
+
+struct ab8500_fg_cap_scaling {
+	bool enable;
+	int cap_to_scale[2];
+	int disable_cap_level;
+	int scaled_cap;
+};
+
+struct ab8500_fg_battery_capacity {
+	int max_mah_design;
+	int max_mah;
+	int mah;
+	int permille;
+	int level;
+	int prev_mah;
+	int prev_percent;
+	int prev_level;
+	int user_mah;
+	struct ab8500_fg_cap_scaling cap_scale;
+};
+
+struct ab8500_fg_flags {
+	bool fg_enabled;
+	bool conv_done;
+	bool charging;
+	bool fully_charged;
+	bool force_full;
+	bool low_bat_delay;
+	bool low_bat;
+	bool bat_ovv;
+	bool batt_unknown;
+	bool calibrate;
+	bool user_cap;
+	bool batt_id_received;
+};
+
+struct inst_curr_result_list {
+	struct list_head list;
+	int *result;
+};
+
+/**
+ * struct ab8500_fg - ab8500 FG device information
+ * @dev:		Pointer to the structure device
+ * @node:		a list of AB8500 FGs, hence prepared for reentrance
+ * @irq			holds the CCEOC interrupt number
+ * @vbat_uv:		Battery voltage in uV
+ * @vbat_nom_uv:	Nominal battery voltage in uV
+ * @inst_curr_ua:	Instantenous battery current in uA
+ * @avg_curr_ua:	Average battery current in uA
+ * @bat_temp		battery temperature
+ * @fg_samples:		Number of samples used in the FG accumulation
+ * @accu_charge:	Accumulated charge from the last conversion
+ * @recovery_cnt:	Counter for recovery mode
+ * @high_curr_cnt:	Counter for high current mode
+ * @init_cnt:		Counter for init mode
+ * @low_bat_cnt		Counter for number of consecutive low battery measures
+ * @nbr_cceoc_irq_cnt	Counter for number of CCEOC irqs received since enabled
+ * @recovery_needed:	Indicate if recovery is needed
+ * @high_curr_mode:	Indicate if we're in high current mode
+ * @init_capacity:	Indicate if initial capacity measuring should be done
+ * @turn_off_fg:	True if fg was off before current measurement
+ * @calib_state		State during offset calibration
+ * @discharge_state:	Current discharge state
+ * @charge_state:	Current charge state
+ * @ab8500_fg_started	Completion struct used for the instant current start
+ * @ab8500_fg_complete	Completion struct used for the instant current reading
+ * @flags:		Structure for information about events triggered
+ * @bat_cap:		Structure for battery capacity specific parameters
+ * @avg_cap:		Average capacity filter
+ * @parent:		Pointer to the struct ab8500
+ * @main_bat_v:		ADC channel for the main battery voltage
+ * @bm:           	Platform specific battery management information
+ * @fg_psy:		Structure that holds the FG specific battery properties
+ * @fg_wq:		Work queue for running the FG algorithm
+ * @fg_periodic_work:	Work to run the FG algorithm periodically
+ * @fg_low_bat_work:	Work to check low bat condition
+ * @fg_reinit_work	Work used to reset and reinitialise the FG algorithm
+ * @fg_work:		Work to run the FG algorithm instantly
+ * @fg_acc_cur_work:	Work to read the FG accumulator
+ * @fg_check_hw_failure_work:	Work for checking HW state
+ * @cc_lock:		Mutex for locking the CC
+ * @fg_kobject:		Structure of type kobject
+ */
+struct ab8500_fg {
+	struct device *dev;
+	struct list_head node;
+	int irq;
+	int vbat_uv;
+	int vbat_nom_uv;
+	int inst_curr_ua;
+	int avg_curr_ua;
+	int bat_temp;
+	int fg_samples;
+	int accu_charge;
+	int recovery_cnt;
+	int high_curr_cnt;
+	int init_cnt;
+	int low_bat_cnt;
+	int nbr_cceoc_irq_cnt;
+	u32 line_impedance_uohm;
+	bool recovery_needed;
+	bool high_curr_mode;
+	bool init_capacity;
+	bool turn_off_fg;
+	enum ab8500_fg_calibration_state calib_state;
+	enum ab8500_fg_discharge_state discharge_state;
+	enum ab8500_fg_charge_state charge_state;
+	struct completion ab8500_fg_started;
+	struct completion ab8500_fg_complete;
+	struct ab8500_fg_flags flags;
+	struct ab8500_fg_battery_capacity bat_cap;
+	struct ab8500_fg_avg_cap avg_cap;
+	struct ab8500 *parent;
+	struct iio_channel *main_bat_v;
+	struct ab8500_bm_data *bm;
+	struct power_supply *fg_psy;
+	struct workqueue_struct *fg_wq;
+	struct delayed_work fg_periodic_work;
+	struct delayed_work fg_low_bat_work;
+	struct delayed_work fg_reinit_work;
+	struct work_struct fg_work;
+	struct work_struct fg_acc_cur_work;
+	struct delayed_work fg_check_hw_failure_work;
+	struct mutex cc_lock;
+	struct kobject fg_kobject;
+};
+static LIST_HEAD(ab8500_fg_list);
+
+/**
+ * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge
+ * (i.e. the first fuel gauge in the instance list)
+ */
+struct ab8500_fg *ab8500_fg_get(void)
+{
+	return list_first_entry_or_null(&ab8500_fg_list, struct ab8500_fg,
+					node);
+}
+
+/* Main battery properties */
+static enum power_supply_property ab8500_fg_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+};
+
+/*
+ * This array maps the raw hex value to lowbat voltage used by the AB8500
+ * Values taken from the UM0836, in microvolts.
+ */
+static int ab8500_fg_lowbat_voltage_map[] = {
+	2300000,
+	2325000,
+	2350000,
+	2375000,
+	2400000,
+	2425000,
+	2450000,
+	2475000,
+	2500000,
+	2525000,
+	2550000,
+	2575000,
+	2600000,
+	2625000,
+	2650000,
+	2675000,
+	2700000,
+	2725000,
+	2750000,
+	2775000,
+	2800000,
+	2825000,
+	2850000,
+	2875000,
+	2900000,
+	2925000,
+	2950000,
+	2975000,
+	3000000,
+	3025000,
+	3050000,
+	3075000,
+	3100000,
+	3125000,
+	3150000,
+	3175000,
+	3200000,
+	3225000,
+	3250000,
+	3275000,
+	3300000,
+	3325000,
+	3350000,
+	3375000,
+	3400000,
+	3425000,
+	3450000,
+	3475000,
+	3500000,
+	3525000,
+	3550000,
+	3575000,
+	3600000,
+	3625000,
+	3650000,
+	3675000,
+	3700000,
+	3725000,
+	3750000,
+	3775000,
+	3800000,
+	3825000,
+	3850000,
+	3850000,
+};
+
+static u8 ab8500_volt_to_regval(int voltage_uv)
+{
+	int i;
+
+	if (voltage_uv < ab8500_fg_lowbat_voltage_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) {
+		if (voltage_uv < ab8500_fg_lowbat_voltage_map[i])
+			return (u8) i - 1;
+	}
+
+	/* If not captured above, return index of last element */
+	return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1;
+}
+
+/**
+ * ab8500_fg_is_low_curr() - Low or high current mode
+ * @di:		pointer to the ab8500_fg structure
+ * @curr_ua:	the current to base or our decision on in microampere
+ *
+ * Low current mode if the current consumption is below a certain threshold
+ */
+static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr_ua)
+{
+	/*
+	 * We want to know if we're in low current mode
+	 */
+	if (curr_ua > -di->bm->fg_params->high_curr_threshold_ua)
+		return true;
+	else
+		return false;
+}
+
+/**
+ * ab8500_fg_add_cap_sample() - Add capacity to average filter
+ * @di:		pointer to the ab8500_fg structure
+ * @sample:	the capacity in mAh to add to the filter
+ *
+ * A capacity is added to the filter and a new mean capacity is calculated and
+ * returned
+ */
+static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
+{
+	time64_t now = ktime_get_boottime_seconds();
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	do {
+		avg->sum += sample - avg->samples[avg->pos];
+		avg->samples[avg->pos] = sample;
+		avg->time_stamps[avg->pos] = now;
+		avg->pos++;
+
+		if (avg->pos == NBR_AVG_SAMPLES)
+			avg->pos = 0;
+
+		if (avg->nbr_samples < NBR_AVG_SAMPLES)
+			avg->nbr_samples++;
+
+		/*
+		 * Check the time stamp for each sample. If too old,
+		 * replace with latest sample
+		 */
+	} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+
+	avg->avg = avg->sum / avg->nbr_samples;
+
+	return avg->avg;
+}
+
+/**
+ * ab8500_fg_clear_cap_samples() - Clear average filter
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * The capacity filter is reset to zero.
+ */
+static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
+{
+	int i;
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	avg->pos = 0;
+	avg->nbr_samples = 0;
+	avg->sum = 0;
+	avg->avg = 0;
+
+	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+		avg->samples[i] = 0;
+		avg->time_stamps[i] = 0;
+	}
+}
+
+/**
+ * ab8500_fg_fill_cap_sample() - Fill average filter
+ * @di:		pointer to the ab8500_fg structure
+ * @sample:	the capacity in mAh to fill the filter with
+ *
+ * The capacity filter is filled with a capacity in mAh
+ */
+static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
+{
+	int i;
+	time64_t now;
+	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+	now = ktime_get_boottime_seconds();
+
+	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+		avg->samples[i] = sample;
+		avg->time_stamps[i] = now;
+	}
+
+	avg->pos = 0;
+	avg->nbr_samples = NBR_AVG_SAMPLES;
+	avg->sum = sample * NBR_AVG_SAMPLES;
+	avg->avg = sample;
+}
+
+/**
+ * ab8500_fg_coulomb_counter() - enable coulomb counter
+ * @di:		pointer to the ab8500_fg structure
+ * @enable:	enable/disable
+ *
+ * Enable/Disable coulomb counter.
+ * On failure returns negative value.
+ */
+static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
+{
+	int ret = 0;
+	mutex_lock(&di->cc_lock);
+	if (enable) {
+		/* To be able to reprogram the number of samples, we have to
+		 * first stop the CC and then enable it again */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0x00);
+		if (ret)
+			goto cc_err;
+
+		/* Program the samples */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+			di->fg_samples);
+		if (ret)
+			goto cc_err;
+
+		/* Start the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG,
+			(CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+		if (ret)
+			goto cc_err;
+
+		di->flags.fg_enabled = true;
+	} else {
+		/* Clear any pending read requests */
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			(RESET_ACCU | READ_REQ), 0);
+		if (ret)
+			goto cc_err;
+
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0);
+		if (ret)
+			goto cc_err;
+
+		/* Stop the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0);
+		if (ret)
+			goto cc_err;
+
+		di->flags.fg_enabled = false;
+
+	}
+	dev_dbg(di->dev, " CC enabled: %d Samples: %d\n",
+		enable, di->fg_samples);
+
+	mutex_unlock(&di->cc_lock);
+
+	return ret;
+cc_err:
+	dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__);
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_start() - start battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 0 or error code
+ * Note: This is part "one" and has to be called before
+ * ab8500_fg_inst_curr_finalize()
+ */
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+{
+	u8 reg_val;
+	int ret;
+
+	mutex_lock(&di->cc_lock);
+
+	di->nbr_cceoc_irq_cnt = 0;
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8500_RTC_CC_CONF_REG, &reg_val);
+	if (ret < 0)
+		goto fail;
+
+	if (!(reg_val & CC_PWR_UP_ENA)) {
+		dev_dbg(di->dev, "%s Enable FG\n", __func__);
+		di->turn_off_fg = true;
+
+		/* Program the samples */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+			SEC_TO_SAMPLE(10));
+		if (ret)
+			goto fail;
+
+		/* Start the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG,
+			(CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+		if (ret)
+			goto fail;
+	} else {
+		di->turn_off_fg = false;
+	}
+
+	/* Return and WFI */
+	reinit_completion(&di->ab8500_fg_started);
+	reinit_completion(&di->ab8500_fg_complete);
+	enable_irq(di->irq);
+
+	/* Note: cc_lock is still locked */
+	return 0;
+fail:
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_started() - check if fg conversion has started
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion started, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
+{
+	return completion_done(&di->ab8500_fg_started);
+}
+
+/**
+ * ab8500_fg_inst_curr_done() - check if fg conversion is done
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion done, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
+{
+	return completion_done(&di->ab8500_fg_complete);
+}
+
+/**
+ * ab8500_fg_inst_curr_finalize() - battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ * @curr_ua:	battery instantenous current in microampere (on success)
+ *
+ * Returns 0 or an error code
+ * Note: This is part "two" and has to be called at earliest 250 ms
+ * after ab8500_fg_inst_curr_start()
+ */
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *curr_ua)
+{
+	u8 low, high;
+	int val;
+	int ret;
+	unsigned long timeout;
+
+	if (!completion_done(&di->ab8500_fg_complete)) {
+		timeout = wait_for_completion_timeout(
+			&di->ab8500_fg_complete,
+			INS_CURR_TIMEOUT);
+		dev_dbg(di->dev, "Finalize time: %d ms\n",
+			jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+		if (!timeout) {
+			ret = -ETIME;
+			disable_irq(di->irq);
+			di->nbr_cceoc_irq_cnt = 0;
+			dev_err(di->dev, "completion timed out [%d]\n",
+				__LINE__);
+			goto fail;
+		}
+	}
+
+	disable_irq(di->irq);
+	di->nbr_cceoc_irq_cnt = 0;
+
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			READ_REQ, READ_REQ);
+
+	/* 100uS between read request and read is needed */
+	usleep_range(100, 100);
+
+	/* Read CC Sample conversion value Low and high */
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_SMPL_CNVL_REG,  &low);
+	if (ret < 0)
+		goto fail;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_SMPL_CNVH_REG,  &high);
+	if (ret < 0)
+		goto fail;
+
+	/*
+	 * negative value for Discharging
+	 * convert 2's complement into decimal
+	 */
+	if (high & 0x10)
+		val = (low | (high << 8) | 0xFFFFE000);
+	else
+		val = (low | (high << 8));
+
+	/*
+	 * Convert to unit value in mA
+	 * Full scale input voltage is
+	 * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542.000 uA
+	 * Given a 250ms conversion cycle time the LSB corresponds
+	 * to 107.1 nAh. Convert to current by dividing by the conversion
+	 * time in hours (250ms = 1 / (3600 * 4)h)
+	 * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 */
+	val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / di->bm->fg_res;
+
+	if (di->turn_off_fg) {
+		dev_dbg(di->dev, "%s Disable FG\n", __func__);
+
+		/* Clear any pending read requests */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+		if (ret)
+			goto fail;
+
+		/* Stop the CC */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8500_RTC_CC_CONF_REG, 0);
+		if (ret)
+			goto fail;
+	}
+	mutex_unlock(&di->cc_lock);
+	*curr_ua = val;
+
+	return 0;
+fail:
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_blocking() - battery instantaneous current
+ * @di:         pointer to the ab8500_fg structure
+ *
+ * Returns battery instantenous current in microampere (on success)
+ * else error code
+ */
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
+{
+	int ret;
+	unsigned long timeout;
+	int curr_ua = 0;
+
+	ret = ab8500_fg_inst_curr_start(di);
+	if (ret) {
+		dev_err(di->dev, "Failed to initialize fg_inst\n");
+		return 0;
+	}
+
+	/* Wait for CC to actually start */
+	if (!completion_done(&di->ab8500_fg_started)) {
+		timeout = wait_for_completion_timeout(
+			&di->ab8500_fg_started,
+			INS_CURR_TIMEOUT);
+		dev_dbg(di->dev, "Start time: %d ms\n",
+			jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+		if (!timeout) {
+			ret = -ETIME;
+			dev_err(di->dev, "completion timed out [%d]\n",
+				__LINE__);
+			goto fail;
+		}
+	}
+
+	ret = ab8500_fg_inst_curr_finalize(di, &curr_ua);
+	if (ret) {
+		dev_err(di->dev, "Failed to finalize fg_inst\n");
+		return 0;
+	}
+
+	dev_dbg(di->dev, "%s instant current: %d uA", __func__, curr_ua);
+	return curr_ua;
+fail:
+	disable_irq(di->irq);
+	mutex_unlock(&di->cc_lock);
+	return ret;
+}
+
+/**
+ * ab8500_fg_acc_cur_work() - average battery current
+ * @work:	pointer to the work_struct structure
+ *
+ * Updated the average battery current obtained from the
+ * coulomb counter.
+ */
+static void ab8500_fg_acc_cur_work(struct work_struct *work)
+{
+	int val;
+	int ret;
+	u8 low, med, high;
+
+	struct ab8500_fg *di = container_of(work,
+		struct ab8500_fg, fg_acc_cur_work);
+
+	mutex_lock(&di->cc_lock);
+	ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ);
+	if (ret)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_LOW,  &low);
+	if (ret < 0)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_MED,  &med);
+	if (ret < 0)
+		goto exit;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+		AB8500_GASG_CC_NCOV_ACCU_HIGH, &high);
+	if (ret < 0)
+		goto exit;
+
+	/* Check for sign bit in case of negative value, 2's complement */
+	if (high & 0x10)
+		val = (low | (med << 8) | (high << 16) | 0xFFE00000);
+	else
+		val = (low | (med << 8) | (high << 16));
+
+	/*
+	 * Convert to uAh
+	 * Given a 250ms conversion cycle time the LSB corresponds
+	 * to 112.9 nAh.
+	 * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 */
+	di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
+		(100 * di->bm->fg_res);
+
+	/*
+	 * Convert to unit value in uA
+	 * by dividing by the conversion
+	 * time in hours (= samples / (3600 * 4)h)
+	 */
+	di->avg_curr_ua = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
+		(di->bm->fg_res * (di->fg_samples / 4));
+
+	di->flags.conv_done = true;
+
+	mutex_unlock(&di->cc_lock);
+
+	queue_work(di->fg_wq, &di->fg_work);
+
+	dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+				di->bm->fg_res, di->fg_samples, val, di->accu_charge);
+	return;
+exit:
+	dev_err(di->dev,
+		"Failed to read or write gas gauge registers\n");
+	mutex_unlock(&di->cc_lock);
+	queue_work(di->fg_wq, &di->fg_work);
+}
+
+/**
+ * ab8500_fg_bat_voltage() - get battery voltage
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery voltage in microvolts (on success) else error code
+ */
+static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
+{
+	int vbat, ret;
+	static int prev;
+
+	ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+	if (ret < 0) {
+		dev_err(di->dev,
+			"%s ADC conversion failed, using previous value\n",
+			__func__);
+		return prev;
+	}
+
+	/* IIO returns millivolts but we want microvolts */
+	vbat *= 1000;
+	prev = vbat;
+	return vbat;
+}
+
+/**
+ * ab8500_fg_volt_to_capacity() - Voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ * @voltage_uv:	The voltage to convert to a capacity in microvolt
+ *
+ * Returns battery capacity in per mille based on voltage
+ */
+static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage_uv)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+
+	/* Multiply by 10 because the capacity is tracked in per mille */
+	return power_supply_batinfo_ocv2cap(bi, voltage_uv, di->bat_temp) *  10;
+}
+
+/**
+ * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is not compensated
+ * for the voltage drop due to the load
+ */
+static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
+{
+	di->vbat_uv = ab8500_fg_bat_voltage(di);
+	return ab8500_fg_volt_to_capacity(di, di->vbat_uv);
+}
+
+/**
+ * ab8500_fg_battery_resistance() - Returns the battery inner resistance
+ * @di:		pointer to the ab8500_fg structure
+ * @vbat_uncomp_uv: Uncompensated VBAT voltage
+ *
+ * Returns battery inner resistance added with the fuel gauge resistor value
+ * to get the total resistance in the whole link from gnd to bat+ node
+ * in milliohm.
+ */
+static int ab8500_fg_battery_resistance(struct ab8500_fg *di, int vbat_uncomp_uv)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	int resistance_percent = 0;
+	int resistance;
+
+	/*
+	 * Determine the resistance at this voltage. First try VBAT-to-Ri else
+	 * just infer it from the surrounding temperature, if nothing works just
+	 * use the internal resistance.
+	 */
+	if (power_supply_supports_vbat2ri(bi)) {
+		resistance = power_supply_vbat2ri(bi, vbat_uncomp_uv, di->flags.charging);
+		/* Convert to milliohm */
+		resistance = resistance / 1000;
+	} else if (power_supply_supports_temp2ri(bi)) {
+		resistance_percent = power_supply_temp2resist_simple(bi->resist_table,
+								     bi->resist_table_size,
+								     di->bat_temp / 10);
+		/* Convert to milliohm */
+		resistance = bi->factory_internal_resistance_uohm / 1000;
+		resistance = resistance * resistance_percent / 100;
+	} else {
+		/* Last fallback */
+		resistance = bi->factory_internal_resistance_uohm / 1000;
+	}
+
+	/* Compensate for line impedance */
+	resistance += (di->line_impedance_uohm / 1000);
+
+	dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
+	    " fg resistance %d, total: %d (mOhm)\n",
+		__func__, di->bat_temp, resistance, di->bm->fg_res / 10,
+		(di->bm->fg_res / 10) + resistance);
+
+	/* fg_res variable is in 0.1mOhm */
+	resistance += di->bm->fg_res / 10;
+
+	return resistance;
+}
+
+/**
+ * ab8500_load_comp_fg_bat_voltage() - get load compensated battery voltage
+ * @di:		pointer to the ab8500_fg structure
+ * @always:	always return a voltage, also uncompensated
+ *
+ * Returns compensated battery voltage (on success) else error code.
+ * If always is specified, we always return a voltage but it may be
+ * uncompensated.
+ */
+static int ab8500_load_comp_fg_bat_voltage(struct ab8500_fg *di, bool always)
+{
+	int i = 0;
+	int vbat_uv = 0;
+	int rcomp;
+
+	/* Average the instant current to get a stable current measurement */
+	ab8500_fg_inst_curr_start(di);
+
+	do {
+		vbat_uv += ab8500_fg_bat_voltage(di);
+		i++;
+		usleep_range(5000, 6000);
+	} while (!ab8500_fg_inst_curr_done(di) &&
+		 i <= WAIT_FOR_INST_CURRENT_MAX);
+
+	if (i > WAIT_FOR_INST_CURRENT_MAX) {
+		dev_err(di->dev,
+			"TIMEOUT: return uncompensated measurement of VBAT\n");
+		di->vbat_uv = vbat_uv / i;
+		return di->vbat_uv;
+	}
+
+	ab8500_fg_inst_curr_finalize(di, &di->inst_curr_ua);
+
+	/*
+	 * If there is too high current dissipation, the compensation cannot be
+	 * trusted so return an error unless we must return something here, as
+	 * enforced by the "always" parameter.
+	 */
+	if (!always && di->inst_curr_ua < IGNORE_VBAT_HIGHCUR)
+		return -EINVAL;
+
+	vbat_uv = vbat_uv / i;
+
+	/* Next we apply voltage compensation from internal resistance */
+	rcomp = ab8500_fg_battery_resistance(di, vbat_uv);
+	vbat_uv = vbat_uv - (di->inst_curr_ua * rcomp) / 1000;
+
+	/* Always keep this state at latest measurement */
+	di->vbat_uv = vbat_uv;
+
+	return vbat_uv;
+}
+
+/**
+ * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is load compensated
+ * for the voltage drop
+ */
+static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
+{
+	int vbat_comp_uv;
+
+	vbat_comp_uv = ab8500_load_comp_fg_bat_voltage(di, true);
+
+	return ab8500_fg_volt_to_capacity(di, vbat_comp_uv);
+}
+
+/**
+ * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_mah:	capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in permille
+ */
+static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah)
+{
+	return (cap_mah * 1000) / di->bat_cap.max_mah_design;
+}
+
+/**
+ * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_pm:	capacity in permille
+ *
+ * Converts capacity in permille to capacity in mAh
+ */
+static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm)
+{
+	return cap_pm * di->bat_cap.max_mah_design / 1000;
+}
+
+/**
+ * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh
+ * @di:		pointer to the ab8500_fg structure
+ * @cap_mah:	capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in uWh
+ */
+static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah)
+{
+	u64 div_res;
+	u32 div_rem;
+
+	/*
+	 * Capacity is in milli ampere hours (10^-3)Ah
+	 * Nominal voltage is in microvolts (10^-6)V
+	 * divide by 1000000 after multiplication to get to mWh
+	 */
+	div_res = ((u64) cap_mah) * ((u64) di->vbat_nom_uv);
+	div_rem = do_div(div_res, 1000000);
+
+	/* Make sure to round upwards if necessary */
+	if (div_rem >= 1000000 / 2)
+		div_res++;
+
+	return (int) div_res;
+}
+
+/**
+ * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. The filter is filled with this capacity
+ */
+static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di)
+{
+	dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+		__func__,
+		di->bat_cap.mah,
+		di->accu_charge);
+
+	/* Capacity should not be less than 0 */
+	if (di->bat_cap.mah + di->accu_charge > 0)
+		di->bat_cap.mah += di->accu_charge;
+	else
+		di->bat_cap.mah = 0;
+	/*
+	 * We force capacity to 100% once when the algorithm
+	 * reports that it's full.
+	 */
+	if (di->bat_cap.mah >= di->bat_cap.max_mah_design ||
+		di->flags.force_full) {
+		di->bat_cap.mah = di->bat_cap.max_mah_design;
+	}
+
+	ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+	di->bat_cap.permille =
+		ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+	/* We need to update battery voltage and inst current when charging */
+	di->vbat_uv = ab8500_fg_bat_voltage(di);
+	di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on the load compensated battery voltage.
+ * This value is added to the filter and a new mean value is calculated and
+ * returned.
+ */
+static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di)
+{
+	int permille, mah;
+
+	permille = ab8500_fg_load_comp_volt_to_capacity(di);
+
+	mah = ab8500_fg_convert_permille_to_mah(di, permille);
+
+	di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah);
+	di->bat_cap.permille =
+		ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. This value is added to the filter and a
+ * new mean value is calculated and returned.
+ */
+static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di)
+{
+	int permille_volt, permille;
+
+	dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+		__func__,
+		di->bat_cap.mah,
+		di->accu_charge);
+
+	/* Capacity should not be less than 0 */
+	if (di->bat_cap.mah + di->accu_charge > 0)
+		di->bat_cap.mah += di->accu_charge;
+	else
+		di->bat_cap.mah = 0;
+
+	if (di->bat_cap.mah >= di->bat_cap.max_mah_design)
+		di->bat_cap.mah = di->bat_cap.max_mah_design;
+
+	/*
+	 * Check against voltage based capacity. It can not be lower
+	 * than what the uncompensated voltage says
+	 */
+	permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+	permille_volt = ab8500_fg_uncomp_volt_to_capacity(di);
+
+	if (permille < permille_volt) {
+		di->bat_cap.permille = permille_volt;
+		di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di,
+			di->bat_cap.permille);
+
+		dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n",
+			__func__,
+			permille,
+			permille_volt);
+
+		ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+	} else {
+		ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+		di->bat_cap.permille =
+			ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+	}
+
+	return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_capacity_level() - Get the battery capacity level
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Get the battery capacity level based on the capacity in percent
+ */
+static int ab8500_fg_capacity_level(struct ab8500_fg *di)
+{
+	int ret, percent;
+
+	percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+	if (percent <= di->bm->cap_levels->critical ||
+		di->flags.low_bat)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+	else if (percent <= di->bm->cap_levels->low)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+	else if (percent <= di->bm->cap_levels->normal)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	else if (percent <= di->bm->cap_levels->high)
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+	else
+		ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+
+	return ret;
+}
+
+/**
+ * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Calculates the capacity to be shown to upper layers. Scales the capacity
+ * to have 100% as a reference from the actual capacity upon removal of charger
+ * when charging is in maintenance mode.
+ */
+static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
+{
+	struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+	int capacity = di->bat_cap.prev_percent;
+
+	if (!cs->enable)
+		return capacity;
+
+	/*
+	 * As long as we are in fully charge mode scale the capacity
+	 * to show 100%.
+	 */
+	if (di->flags.fully_charged) {
+		cs->cap_to_scale[0] = 100;
+		cs->cap_to_scale[1] =
+			max(capacity, di->bm->fg_params->maint_thres);
+		dev_dbg(di->dev, "Scale cap with %d/%d\n",
+			 cs->cap_to_scale[0], cs->cap_to_scale[1]);
+	}
+
+	/* Calculates the scaled capacity. */
+	if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
+					&& (cs->cap_to_scale[1] > 0))
+		capacity = min(100,
+				 DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
+						 cs->cap_to_scale[0],
+						 cs->cap_to_scale[1]));
+
+	if (di->flags.charging) {
+		if (capacity < cs->disable_cap_level) {
+			cs->disable_cap_level = capacity;
+			dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
+				cs->disable_cap_level);
+		} else if (!di->flags.fully_charged) {
+			if (di->bat_cap.prev_percent >=
+			    cs->disable_cap_level) {
+				dev_dbg(di->dev, "Disabling scaled capacity\n");
+				cs->enable = false;
+				capacity = di->bat_cap.prev_percent;
+			} else {
+				dev_dbg(di->dev,
+					"Waiting in cap to level %d%%\n",
+					cs->disable_cap_level);
+				capacity = cs->disable_cap_level;
+			}
+		}
+	}
+
+	return capacity;
+}
+
+/**
+ * ab8500_fg_update_cap_scalers() - Capacity scaling
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * To be called when state change from charge<->discharge to update
+ * the capacity scalers.
+ */
+static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
+{
+	struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+
+	if (!cs->enable)
+		return;
+	if (di->flags.charging) {
+		di->bat_cap.cap_scale.disable_cap_level =
+			di->bat_cap.cap_scale.scaled_cap;
+		dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
+				di->bat_cap.cap_scale.disable_cap_level);
+	} else {
+		if (cs->scaled_cap != 100) {
+			cs->cap_to_scale[0] = cs->scaled_cap;
+			cs->cap_to_scale[1] = di->bat_cap.prev_percent;
+		} else {
+			cs->cap_to_scale[0] = 100;
+			cs->cap_to_scale[1] =
+				max(di->bat_cap.prev_percent,
+				    di->bm->fg_params->maint_thres);
+		}
+
+		dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
+				cs->cap_to_scale[0], cs->cap_to_scale[1]);
+	}
+}
+
+/**
+ * ab8500_fg_check_capacity_limits() - Check if capacity has changed
+ * @di:		pointer to the ab8500_fg structure
+ * @init:	capacity is allowed to go up in init mode
+ *
+ * Check if capacity or capacity limit has changed and notify the system
+ * about it using the power_supply framework
+ */
+static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
+{
+	bool changed = false;
+	int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+	di->bat_cap.level = ab8500_fg_capacity_level(di);
+
+	if (di->bat_cap.level != di->bat_cap.prev_level) {
+		/*
+		 * We do not allow reported capacity level to go up
+		 * unless we're charging or if we're in init
+		 */
+		if (!(!di->flags.charging && di->bat_cap.level >
+			di->bat_cap.prev_level) || init) {
+			dev_dbg(di->dev, "level changed from %d to %d\n",
+				di->bat_cap.prev_level,
+				di->bat_cap.level);
+			di->bat_cap.prev_level = di->bat_cap.level;
+			changed = true;
+		} else {
+			dev_dbg(di->dev, "level not allowed to go up "
+				"since no charger is connected: %d to %d\n",
+				di->bat_cap.prev_level,
+				di->bat_cap.level);
+		}
+	}
+
+	/*
+	 * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate
+	 * shutdown
+	 */
+	if (di->flags.low_bat) {
+		dev_dbg(di->dev, "Battery low, set capacity to 0\n");
+		di->bat_cap.prev_percent = 0;
+		di->bat_cap.permille = 0;
+		percent = 0;
+		di->bat_cap.prev_mah = 0;
+		di->bat_cap.mah = 0;
+		changed = true;
+	} else if (di->flags.fully_charged) {
+		/*
+		 * We report 100% if algorithm reported fully charged
+		 * and show 100% during maintenance charging (scaling).
+		 */
+		if (di->flags.force_full) {
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+
+			if (!di->bat_cap.cap_scale.enable &&
+						di->bm->capacity_scaling) {
+				di->bat_cap.cap_scale.enable = true;
+				di->bat_cap.cap_scale.cap_to_scale[0] = 100;
+				di->bat_cap.cap_scale.cap_to_scale[1] =
+						di->bat_cap.prev_percent;
+				di->bat_cap.cap_scale.disable_cap_level = 100;
+			}
+		} else if (di->bat_cap.prev_percent != percent) {
+			dev_dbg(di->dev,
+				"battery reported full "
+				"but capacity dropping: %d\n",
+				percent);
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+		}
+	} else if (di->bat_cap.prev_percent != percent) {
+		if (percent == 0) {
+			/*
+			 * We will not report 0% unless we've got
+			 * the LOW_BAT IRQ, no matter what the FG
+			 * algorithm says.
+			 */
+			di->bat_cap.prev_percent = 1;
+			percent = 1;
+
+			changed = true;
+		} else if (!(!di->flags.charging &&
+			percent > di->bat_cap.prev_percent) || init) {
+			/*
+			 * We do not allow reported capacity to go up
+			 * unless we're charging or if we're in init
+			 */
+			dev_dbg(di->dev,
+				"capacity changed from %d to %d (%d)\n",
+				di->bat_cap.prev_percent,
+				percent,
+				di->bat_cap.permille);
+			di->bat_cap.prev_percent = percent;
+			di->bat_cap.prev_mah = di->bat_cap.mah;
+
+			changed = true;
+		} else {
+			dev_dbg(di->dev, "capacity not allowed to go up since "
+				"no charger is connected: %d to %d (%d)\n",
+				di->bat_cap.prev_percent,
+				percent,
+				di->bat_cap.permille);
+		}
+	}
+
+	if (changed) {
+		if (di->bm->capacity_scaling) {
+			di->bat_cap.cap_scale.scaled_cap =
+				ab8500_fg_calculate_scaled_capacity(di);
+
+			dev_info(di->dev, "capacity=%d (%d)\n",
+				di->bat_cap.prev_percent,
+				di->bat_cap.cap_scale.scaled_cap);
+		}
+		power_supply_changed(di->fg_psy);
+		if (di->flags.fully_charged && di->flags.force_full) {
+			dev_dbg(di->dev, "Battery full, notifying.\n");
+			di->flags.force_full = false;
+			sysfs_notify(&di->fg_kobject, NULL, "charge_full");
+		}
+		sysfs_notify(&di->fg_kobject, NULL, "charge_now");
+	}
+}
+
+static void ab8500_fg_charge_state_to(struct ab8500_fg *di,
+	enum ab8500_fg_charge_state new_state)
+{
+	dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n",
+		di->charge_state,
+		charge_state[di->charge_state],
+		new_state,
+		charge_state[new_state]);
+
+	di->charge_state = new_state;
+}
+
+static void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
+	enum ab8500_fg_discharge_state new_state)
+{
+	dev_dbg(di->dev, "Discharge state from %d [%s] to %d [%s]\n",
+		di->discharge_state,
+		discharge_state[di->discharge_state],
+		new_state,
+		discharge_state[new_state]);
+
+	di->discharge_state = new_state;
+}
+
+/**
+ * ab8500_fg_algorithm_charging() - FG algorithm for when charging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're charging
+ */
+static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
+{
+	/*
+	 * If we change to discharge mode
+	 * we should start with recovery
+	 */
+	if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY)
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+	switch (di->charge_state) {
+	case AB8500_FG_CHARGE_INIT:
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_charging);
+
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
+
+		break;
+
+	case AB8500_FG_CHARGE_READOUT:
+		/*
+		 * Read the FG and calculate the new capacity
+		 */
+		mutex_lock(&di->cc_lock);
+		if (!di->flags.conv_done && !di->flags.force_full) {
+			/* Wasn't the CC IRQ that got us here */
+			mutex_unlock(&di->cc_lock);
+			dev_dbg(di->dev, "%s CC conv not done\n",
+				__func__);
+
+			break;
+		}
+		di->flags.conv_done = false;
+		mutex_unlock(&di->cc_lock);
+
+		ab8500_fg_calc_cap_charging(di);
+
+		break;
+
+	default:
+		break;
+	}
+
+	/* Check capacity limits */
+	ab8500_fg_check_capacity_limits(di, false);
+}
+
+static void force_capacity(struct ab8500_fg *di)
+{
+	int cap;
+
+	ab8500_fg_clear_cap_samples(di);
+	cap = di->bat_cap.user_mah;
+	if (cap > di->bat_cap.max_mah_design) {
+		dev_dbg(di->dev, "Remaining cap %d can't be bigger than total"
+			" %d\n", cap, di->bat_cap.max_mah_design);
+		cap = di->bat_cap.max_mah_design;
+	}
+	ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah);
+	di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap);
+	di->bat_cap.mah = cap;
+	ab8500_fg_check_capacity_limits(di, true);
+}
+
+static bool check_sysfs_capacity(struct ab8500_fg *di)
+{
+	int cap, lower, upper;
+	int cap_permille;
+
+	cap = di->bat_cap.user_mah;
+
+	cap_permille = ab8500_fg_convert_mah_to_permille(di,
+		di->bat_cap.user_mah);
+
+	lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+	upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
+
+	if (lower < 0)
+		lower = 0;
+	/* 1000 is permille, -> 100 percent */
+	if (upper > 1000)
+		upper = 1000;
+
+	dev_dbg(di->dev, "Capacity limits:"
+		" (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n",
+		lower, cap_permille, upper, cap, di->bat_cap.mah);
+
+	/* If within limits, use the saved capacity and exit estimation...*/
+	if (cap_permille > lower && cap_permille < upper) {
+		dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap);
+		force_capacity(di);
+		return true;
+	}
+	dev_dbg(di->dev, "Capacity from user out of limits, ignoring");
+	return false;
+}
+
+/**
+ * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're discharging
+ */
+static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
+{
+	int sleep_time;
+
+	/* If we change to charge mode we should start with init */
+	if (di->charge_state != AB8500_FG_CHARGE_INIT)
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+
+	switch (di->discharge_state) {
+	case AB8500_FG_DISCHARGE_INIT:
+		/* We use the FG IRQ to work on */
+		di->init_cnt = 0;
+		di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_INITMEASURING);
+
+		fallthrough;
+	case AB8500_FG_DISCHARGE_INITMEASURING:
+		/*
+		 * Discard a number of samples during startup.
+		 * After that, use compensated voltage for a few
+		 * samples to get an initial capacity.
+		 * Then go to READOUT
+		 */
+		sleep_time = di->bm->fg_params->init_timer;
+
+		/* Discard the first [x] seconds */
+		if (di->init_cnt > di->bm->fg_params->init_discard_time) {
+			ab8500_fg_calc_cap_discharge_voltage(di);
+
+			ab8500_fg_check_capacity_limits(di, true);
+		}
+
+		di->init_cnt += sleep_time;
+		if (di->init_cnt > di->bm->fg_params->init_total_time)
+			ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT_INIT);
+
+		break;
+
+	case AB8500_FG_DISCHARGE_INIT_RECOVERY:
+		di->recovery_cnt = 0;
+		di->recovery_needed = true;
+		ab8500_fg_discharge_state_to(di,
+			AB8500_FG_DISCHARGE_RECOVERY);
+
+		fallthrough;
+
+	case AB8500_FG_DISCHARGE_RECOVERY:
+		sleep_time = di->bm->fg_params->recovery_sleep_timer;
+
+		/*
+		 * We should check the power consumption
+		 * If low, go to READOUT (after x min) or
+		 * RECOVERY_SLEEP if time left.
+		 * If high, go to READOUT
+		 */
+		di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+		if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
+			if (di->recovery_cnt >
+				di->bm->fg_params->recovery_total_time) {
+				di->fg_samples = SEC_TO_SAMPLE(
+					di->bm->fg_params->accu_high_curr);
+				ab8500_fg_coulomb_counter(di, true);
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_READOUT);
+				di->recovery_needed = false;
+			} else {
+				queue_delayed_work(di->fg_wq,
+					&di->fg_periodic_work,
+					sleep_time * HZ);
+			}
+			di->recovery_cnt += sleep_time;
+		} else {
+			di->fg_samples = SEC_TO_SAMPLE(
+				di->bm->fg_params->accu_high_curr);
+			ab8500_fg_coulomb_counter(di, true);
+			ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+		}
+		break;
+
+	case AB8500_FG_DISCHARGE_READOUT_INIT:
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_high_curr);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+		break;
+
+	case AB8500_FG_DISCHARGE_READOUT:
+		di->inst_curr_ua = ab8500_fg_inst_curr_blocking(di);
+
+		if (ab8500_fg_is_low_curr(di, di->inst_curr_ua)) {
+			/* Detect mode change */
+			if (di->high_curr_mode) {
+				di->high_curr_mode = false;
+				di->high_curr_cnt = 0;
+			}
+
+			if (di->recovery_needed) {
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+				queue_delayed_work(di->fg_wq,
+					&di->fg_periodic_work, 0);
+
+				break;
+			}
+
+			ab8500_fg_calc_cap_discharge_voltage(di);
+		} else {
+			mutex_lock(&di->cc_lock);
+			if (!di->flags.conv_done) {
+				/* Wasn't the CC IRQ that got us here */
+				mutex_unlock(&di->cc_lock);
+				dev_dbg(di->dev, "%s CC conv not done\n",
+					__func__);
+
+				break;
+			}
+			di->flags.conv_done = false;
+			mutex_unlock(&di->cc_lock);
+
+			/* Detect mode change */
+			if (!di->high_curr_mode) {
+				di->high_curr_mode = true;
+				di->high_curr_cnt = 0;
+			}
+
+			di->high_curr_cnt +=
+				di->bm->fg_params->accu_high_curr;
+			if (di->high_curr_cnt >
+				di->bm->fg_params->high_curr_time)
+				di->recovery_needed = true;
+
+			ab8500_fg_calc_cap_discharge_fg(di);
+		}
+
+		ab8500_fg_check_capacity_limits(di, false);
+
+		break;
+
+	case AB8500_FG_DISCHARGE_WAKEUP:
+		ab8500_fg_calc_cap_discharge_voltage(di);
+
+		di->fg_samples = SEC_TO_SAMPLE(
+			di->bm->fg_params->accu_high_curr);
+		ab8500_fg_coulomb_counter(di, true);
+		ab8500_fg_discharge_state_to(di,
+				AB8500_FG_DISCHARGE_READOUT);
+
+		ab8500_fg_check_capacity_limits(di, false);
+
+		break;
+
+	default:
+		break;
+	}
+}
+
+/**
+ * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration
+ * @di:		pointer to the ab8500_fg structure
+ *
+ */
+static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di)
+{
+	int ret;
+
+	switch (di->calib_state) {
+	case AB8500_FG_CALIB_INIT:
+		dev_dbg(di->dev, "Calibration ongoing...\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8);
+		if (ret < 0)
+			goto err;
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA);
+		if (ret < 0)
+			goto err;
+		di->calib_state = AB8500_FG_CALIB_WAIT;
+		break;
+	case AB8500_FG_CALIB_END:
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+			CC_MUXOFFSET, CC_MUXOFFSET);
+		if (ret < 0)
+			goto err;
+		di->flags.calibrate = false;
+		dev_dbg(di->dev, "Calibration done...\n");
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+		break;
+	case AB8500_FG_CALIB_WAIT:
+		dev_dbg(di->dev, "Calibration WFI\n");
+		break;
+	default:
+		break;
+	}
+	return;
+err:
+	/* Something went wrong, don't calibrate then */
+	dev_err(di->dev, "failed to calibrate the CC\n");
+	di->flags.calibrate = false;
+	di->calib_state = AB8500_FG_CALIB_INIT;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+}
+
+/**
+ * ab8500_fg_algorithm() - Entry point for the FG algorithm
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Entry point for the battery capacity calculation state machine
+ */
+static void ab8500_fg_algorithm(struct ab8500_fg *di)
+{
+	if (di->flags.calibrate)
+		ab8500_fg_algorithm_calibrate(di);
+	else {
+		if (di->flags.charging)
+			ab8500_fg_algorithm_charging(di);
+		else
+			ab8500_fg_algorithm_discharging(di);
+	}
+
+	dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
+		"%d %d %d %d %d %d %d\n",
+		di->bat_cap.max_mah_design,
+		di->bat_cap.max_mah,
+		di->bat_cap.mah,
+		di->bat_cap.permille,
+		di->bat_cap.level,
+		di->bat_cap.prev_mah,
+		di->bat_cap.prev_percent,
+		di->bat_cap.prev_level,
+		di->vbat_uv,
+		di->inst_curr_ua,
+		di->avg_curr_ua,
+		di->accu_charge,
+		di->flags.charging,
+		di->charge_state,
+		di->discharge_state,
+		di->high_curr_mode,
+		di->recovery_needed);
+}
+
+/**
+ * ab8500_fg_periodic_work() - Run the FG state machine periodically
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for periodic work
+ */
+static void ab8500_fg_periodic_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_periodic_work.work);
+
+	if (di->init_capacity) {
+		/* Get an initial capacity calculation */
+		ab8500_fg_calc_cap_discharge_voltage(di);
+		ab8500_fg_check_capacity_limits(di, true);
+		di->init_capacity = false;
+
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	} else if (di->flags.user_cap) {
+		if (check_sysfs_capacity(di)) {
+			ab8500_fg_check_capacity_limits(di, true);
+			if (di->flags.charging)
+				ab8500_fg_charge_state_to(di,
+					AB8500_FG_CHARGE_INIT);
+			else
+				ab8500_fg_discharge_state_to(di,
+					AB8500_FG_DISCHARGE_READOUT_INIT);
+		}
+		di->flags.user_cap = false;
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	} else
+		ab8500_fg_algorithm(di);
+
+}
+
+/**
+ * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the OVV_BAT condition
+ */
+static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_check_hw_failure_work.work);
+
+	/*
+	 * If we have had a battery over-voltage situation,
+	 * check ovv-bit to see if it should be reset.
+	 */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_STAT_REG,
+		&reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if ((reg_value & BATT_OVV) == BATT_OVV) {
+		if (!di->flags.bat_ovv) {
+			dev_dbg(di->dev, "Battery OVV\n");
+			di->flags.bat_ovv = true;
+			power_supply_changed(di->fg_psy);
+		}
+		/* Not yet recovered from ovv, reschedule this test */
+		queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
+				   HZ);
+		} else {
+			dev_dbg(di->dev, "Battery recovered from OVV\n");
+			di->flags.bat_ovv = false;
+			power_supply_changed(di->fg_psy);
+	}
+}
+
+/**
+ * ab8500_fg_low_bat_work() - Check LOW_BAT condition
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the LOW_BAT condition
+ */
+static void ab8500_fg_low_bat_work(struct work_struct *work)
+{
+	int vbat_uv;
+
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_low_bat_work.work);
+
+	vbat_uv = ab8500_fg_bat_voltage(di);
+
+	/* Check if LOW_BAT still fulfilled */
+	if (vbat_uv < di->bm->fg_params->lowbat_threshold_uv) {
+		/* Is it time to shut down? */
+		if (di->low_bat_cnt < 1) {
+			di->flags.low_bat = true;
+			dev_warn(di->dev, "Shut down pending...\n");
+		} else {
+			/*
+			* Else we need to re-schedule this check to be able to detect
+			* if the voltage increases again during charging or
+			* due to decreasing load.
+			*/
+			di->low_bat_cnt--;
+			dev_warn(di->dev, "Battery voltage still LOW\n");
+			queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+				round_jiffies(LOW_BAT_CHECK_INTERVAL));
+		}
+	} else {
+		di->flags.low_bat_delay = false;
+		di->low_bat_cnt = 10;
+		dev_warn(di->dev, "Battery voltage OK again\n");
+	}
+
+	/* This is needed to dispatch LOW_BAT */
+	ab8500_fg_check_capacity_limits(di, false);
+}
+
+/**
+ * ab8500_fg_battok_calc - calculate the bit pattern corresponding
+ * to the target voltage.
+ * @di:       pointer to the ab8500_fg structure
+ * @target:   target voltage
+ *
+ * Returns bit pattern closest to the target voltage
+ * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS)
+ */
+
+static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target)
+{
+	if (target > BATT_OK_MIN +
+		(BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS))
+		return BATT_OK_MAX_NR_INCREMENTS;
+	if (target < BATT_OK_MIN)
+		return 0;
+	return (target - BATT_OK_MIN) / BATT_OK_INCREMENT;
+}
+
+/**
+ * ab8500_fg_battok_init_hw_register - init battok levels
+ * @di:       pointer to the ab8500_fg structure
+ *
+ */
+
+static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
+{
+	int selected;
+	int sel0;
+	int sel1;
+	int cbp_sel0;
+	int cbp_sel1;
+	int ret;
+	int new_val;
+
+	sel0 = di->bm->fg_params->battok_falling_th_sel0;
+	sel1 = di->bm->fg_params->battok_raising_th_sel1;
+
+	cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
+	cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
+
+	selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT;
+
+	if (selected != sel0)
+		dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+			sel0, selected, cbp_sel0);
+
+	selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT;
+
+	if (selected != sel1)
+		dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+			sel1, selected, cbp_sel1);
+
+	new_val = cbp_sel0 | (cbp_sel1 << 4);
+
+	dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1);
+	ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK,
+		AB8500_BATT_OK_REG, new_val);
+	return ret;
+}
+
+/**
+ * ab8500_fg_instant_work() - Run the FG state machine instantly
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for instant work
+ */
+static void ab8500_fg_instant_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work);
+
+	ab8500_fg_algorithm(di);
+}
+
+/**
+ * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+	if (!di->nbr_cceoc_irq_cnt) {
+		di->nbr_cceoc_irq_cnt++;
+		complete(&di->ab8500_fg_started);
+	} else {
+		di->nbr_cceoc_irq_cnt = 0;
+		complete(&di->ab8500_fg_complete);
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+	di->calib_state = AB8500_FG_CALIB_END;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	queue_work(di->fg_wq, &di->fg_acc_cur_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_batt_ovv_handler() - Battery OVV occured
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	dev_dbg(di->dev, "Battery OVV\n");
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di)
+{
+	struct ab8500_fg *di = _di;
+
+	/* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
+	if (!di->flags.low_bat_delay) {
+		dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
+		di->flags.low_bat_delay = true;
+		/*
+		 * Start a timer to check LOW_BAT again after some time
+		 * This is done to avoid shutdown on single voltage dips
+		 */
+		queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+			round_jiffies(LOW_BAT_CHECK_INTERVAL));
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_get_property() - get the fg properties
+ * @psy:	pointer to the power_supply structure
+ * @psp:	pointer to the power_supply_property structure
+ * @val:	pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * fg properties by reading the sysfs files.
+ * voltage_now:		battery voltage
+ * current_now:		battery instant current
+ * current_avg:		battery average current
+ * charge_full_design:	capacity where battery is considered full
+ * charge_now:		battery capacity in nAh
+ * capacity:		capacity in percent
+ * capacity_level:	capacity level
+ *
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_fg_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	/*
+	 * If battery is identified as unknown and charging of unknown
+	 * batteries is disabled, we always report 100% capacity and
+	 * capacity level UNKNOWN, since we can't calculate
+	 * remaining capacity
+	 */
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (di->flags.bat_ovv)
+			val->intval = BATT_OVV_VALUE;
+		else
+			val->intval = di->vbat_uv;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = di->inst_curr_ua;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = di->avg_curr_ua;
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		val->intval = ab8500_fg_convert_mah_to_uwh(di,
+				di->bat_cap.max_mah_design);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		val->intval = ab8500_fg_convert_mah_to_uwh(di,
+				di->bat_cap.max_mah);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = ab8500_fg_convert_mah_to_uwh(di,
+					di->bat_cap.max_mah);
+		else
+			val->intval = ab8500_fg_convert_mah_to_uwh(di,
+					di->bat_cap.prev_mah);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = di->bat_cap.max_mah_design;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = di->bat_cap.max_mah;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = di->bat_cap.max_mah;
+		else
+			val->intval = di->bat_cap.prev_mah;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = 100;
+		else
+			val->intval = di->bat_cap.prev_percent;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+				di->flags.batt_id_received)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		else
+			val->intval = di->bat_cap.prev_level;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_fg *di;
+	struct power_supply_battery_info *bi;
+	union power_supply_propval ret;
+	int j;
+
+	psy = (struct power_supply *)data;
+	di = power_supply_get_drvdata(psy);
+	bi = di->bm->bi;
+
+	/*
+	 * For all psy where the name of your driver
+	 * appears in any supplied_to
+	 */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_STATUS:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				switch (ret.intval) {
+				case POWER_SUPPLY_STATUS_UNKNOWN:
+				case POWER_SUPPLY_STATUS_DISCHARGING:
+				case POWER_SUPPLY_STATUS_NOT_CHARGING:
+					if (!di->flags.charging)
+						break;
+					di->flags.charging = false;
+					di->flags.fully_charged = false;
+					if (di->bm->capacity_scaling)
+						ab8500_fg_update_cap_scalers(di);
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				case POWER_SUPPLY_STATUS_FULL:
+					if (di->flags.fully_charged)
+						break;
+					di->flags.fully_charged = true;
+					di->flags.force_full = true;
+					/* Save current capacity as maximum */
+					di->bat_cap.max_mah = di->bat_cap.mah;
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				case POWER_SUPPLY_STATUS_CHARGING:
+					if (di->flags.charging &&
+						!di->flags.fully_charged)
+						break;
+					di->flags.charging = true;
+					di->flags.fully_charged = false;
+					if (di->bm->capacity_scaling)
+						ab8500_fg_update_cap_scalers(di);
+					queue_work(di->fg_wq, &di->fg_work);
+					break;
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_TECHNOLOGY:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (!di->flags.batt_id_received &&
+				    (bi && (bi->technology !=
+					    POWER_SUPPLY_TECHNOLOGY_UNKNOWN))) {
+					di->flags.batt_id_received = true;
+
+					di->bat_cap.max_mah_design =
+						di->bm->bi->charge_full_design_uah;
+
+					di->bat_cap.max_mah =
+						di->bat_cap.max_mah_design;
+
+					di->vbat_nom_uv =
+						di->bm->bi->voltage_max_design_uv;
+				}
+
+				if (ret.intval)
+					di->flags.batt_unknown = false;
+				else
+					di->flags.batt_unknown = true;
+				break;
+			default:
+				break;
+			}
+			break;
+		case POWER_SUPPLY_PROP_TEMP:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				if (di->flags.batt_id_received)
+					di->bat_temp = ret.intval;
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_fg_init_hw_registers() - Set up FG related registers
+ * @di:		pointer to the ab8500_fg structure
+ *
+ * Set up battery OVV, low battery voltage registers
+ */
+static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
+{
+	int ret;
+
+	/*
+	 * Set VBAT OVV (overvoltage) threshold to 4.75V (typ) this is what
+	 * the hardware supports, nothing else can be configured in hardware.
+	 * See this as an "outer limit" where the charger will certainly
+	 * shut down. Other (lower) overvoltage levels need to be implemented
+	 * in software.
+	 */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_CHARGER,
+		AB8500_BATT_OVV,
+		BATT_OVV_TH_4P75,
+		BATT_OVV_TH_4P75);
+	if (ret) {
+		dev_err(di->dev, "failed to set BATT_OVV\n");
+		goto out;
+	}
+
+	/* Enable VBAT OVV detection */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_CHARGER,
+		AB8500_BATT_OVV,
+		BATT_OVV_ENA,
+		BATT_OVV_ENA);
+	if (ret) {
+		dev_err(di->dev, "failed to enable BATT_OVV\n");
+		goto out;
+	}
+
+	/* Low Battery Voltage */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_LOW_BAT_REG,
+		ab8500_volt_to_regval(
+			di->bm->fg_params->lowbat_threshold_uv) << 1 |
+		LOW_BAT_ENABLE);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		goto out;
+	}
+
+	/* Battery OK threshold */
+	ret = ab8500_fg_battok_init_hw_register(di);
+	if (ret) {
+		dev_err(di->dev, "BattOk init write failed.\n");
+		goto out;
+	}
+
+	if (is_ab8505(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
+			goto out;
+		}
+	}
+out:
+	return ret;
+}
+
+/**
+ * ab8500_fg_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void ab8500_fg_external_power_changed(struct power_supply *psy)
+{
+	class_for_each_device(power_supply_class, NULL, psy,
+			      ab8500_fg_get_ext_psy_data);
+}
+
+/**
+ * ab8500_fg_reinit_work() - work to reset the FG algorithm
+ * @work:	pointer to the work_struct structure
+ *
+ * Used to reset the current battery capacity to be able to
+ * retrigger a new voltage base capacity calculation. For
+ * test and verification purpose.
+ */
+static void ab8500_fg_reinit_work(struct work_struct *work)
+{
+	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+		fg_reinit_work.work);
+
+	if (!di->flags.calibrate) {
+		dev_dbg(di->dev, "Resetting FG state machine to init.\n");
+		ab8500_fg_clear_cap_samples(di);
+		ab8500_fg_calc_cap_discharge_voltage(di);
+		ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+		ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	} else {
+		dev_err(di->dev, "Residual offset calibration ongoing "
+			"retrying..\n");
+		/* Wait one second until next try*/
+		queue_delayed_work(di->fg_wq, &di->fg_reinit_work,
+			round_jiffies(1));
+	}
+}
+
+/* Exposure to the sysfs interface */
+
+struct ab8500_fg_sysfs_entry {
+	struct attribute attr;
+	ssize_t (*show)(struct ab8500_fg *, char *);
+	ssize_t (*store)(struct ab8500_fg *, const char *, size_t);
+};
+
+static ssize_t charge_full_show(struct ab8500_fg *di, char *buf)
+{
+	return sprintf(buf, "%d\n", di->bat_cap.max_mah);
+}
+
+static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
+				 size_t count)
+{
+	unsigned long charge_full;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &charge_full);
+	if (ret)
+		return ret;
+
+	di->bat_cap.max_mah = (int) charge_full;
+	return count;
+}
+
+static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
+{
+	return sprintf(buf, "%d\n", di->bat_cap.prev_mah);
+}
+
+static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
+				 size_t count)
+{
+	unsigned long charge_now;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &charge_now);
+	if (ret)
+		return ret;
+
+	di->bat_cap.user_mah = (int) charge_now;
+	di->flags.user_cap = true;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	return count;
+}
+
+static struct ab8500_fg_sysfs_entry charge_full_attr =
+	__ATTR(charge_full, 0644, charge_full_show, charge_full_store);
+
+static struct ab8500_fg_sysfs_entry charge_now_attr =
+	__ATTR(charge_now, 0644, charge_now_show, charge_now_store);
+
+static ssize_t
+ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+	struct ab8500_fg_sysfs_entry *entry;
+	struct ab8500_fg *di;
+
+	entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+	di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+	if (!entry->show)
+		return -EIO;
+
+	return entry->show(di, buf);
+}
+static ssize_t
+ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf,
+		size_t count)
+{
+	struct ab8500_fg_sysfs_entry *entry;
+	struct ab8500_fg *di;
+
+	entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+	di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+	if (!entry->store)
+		return -EIO;
+
+	return entry->store(di, buf, count);
+}
+
+static const struct sysfs_ops ab8500_fg_sysfs_ops = {
+	.show = ab8500_fg_show,
+	.store = ab8500_fg_store,
+};
+
+static struct attribute *ab8500_fg_attrs[] = {
+	&charge_full_attr.attr,
+	&charge_now_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ab8500_fg);
+
+static struct kobj_type ab8500_fg_ktype = {
+	.sysfs_ops = &ab8500_fg_sysfs_ops,
+	.default_groups = ab8500_fg_groups,
+};
+
+/**
+ * ab8500_fg_sysfs_exit() - de-init of sysfs entry
+ * @di:                pointer to the struct ab8500_chargalg
+ *
+ * This function removes the entry in sysfs.
+ */
+static void ab8500_fg_sysfs_exit(struct ab8500_fg *di)
+{
+	kobject_del(&di->fg_kobject);
+}
+
+/**
+ * ab8500_fg_sysfs_init() - init of sysfs entry
+ * @di:                pointer to the struct ab8500_chargalg
+ *
+ * This function adds an entry in sysfs.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
+{
+	int ret = 0;
+
+	ret = kobject_init_and_add(&di->fg_kobject,
+		&ab8500_fg_ktype,
+		NULL, "battery");
+	if (ret < 0) {
+		kobject_put(&di->fg_kobject);
+		dev_err(di->dev, "failed to create sysfs entry\n");
+	}
+
+	return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+
+}
+
+static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_restart_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_write(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0xF) {
+		dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
+
+fail:
+	return count;
+
+}
+
+static ssize_t ab8505_powercut_timer_read(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_read(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0)
+		goto fail;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_write(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x1) {
+		dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_flag_read(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_read(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_write(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	if (kstrtoint(buf, 10, &reg_value))
+		goto fail;
+
+	if (reg_value > 0x7) {
+		dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
+						  struct device_attribute *attr,
+						  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
+
+fail:
+	return ret;
+}
+
+static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
+	__ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
+	__ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
+	__ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_restart_read, ab8505_powercut_restart_write),
+	__ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
+	__ATTR(powercut_restart_counter, S_IRUGO,
+		ab8505_powercut_restart_counter_read, NULL),
+	__ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_read, ab8505_powercut_write),
+	__ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
+	__ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
+	__ATTR(powercut_enable_status, S_IRUGO,
+		ab8505_powercut_enable_status_read, NULL),
+};
+
+static int ab8500_fg_sysfs_psy_create_attrs(struct ab8500_fg *di)
+{
+	unsigned int i;
+
+	if (is_ab8505(di->parent)) {
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			if (device_create_file(&di->fg_psy->dev,
+					       &ab8505_fg_sysfs_psy_attrs[i]))
+				goto sysfs_psy_create_attrs_failed_ab8505;
+	}
+	return 0;
+sysfs_psy_create_attrs_failed_ab8505:
+	dev_err(&di->fg_psy->dev, "Failed creating sysfs psy attrs for ab8505.\n");
+	while (i--)
+		device_remove_file(&di->fg_psy->dev,
+				   &ab8505_fg_sysfs_psy_attrs[i]);
+
+	return -EIO;
+}
+
+static void ab8500_fg_sysfs_psy_remove_attrs(struct ab8500_fg *di)
+{
+	unsigned int i;
+
+	if (is_ab8505(di->parent)) {
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			(void)device_remove_file(&di->fg_psy->dev,
+						 &ab8505_fg_sysfs_psy_attrs[i]);
+	}
+}
+
+/* Exposure to the sysfs interface <<END>> */
+
+static int __maybe_unused ab8500_fg_resume(struct device *dev)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	/*
+	 * Change state if we're not charging. If we're charging we will wake
+	 * up on the FG IRQ
+	 */
+	if (!di->flags.charging) {
+		ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP);
+		queue_work(di->fg_wq, &di->fg_work);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_fg_suspend(struct device *dev)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	flush_delayed_work(&di->fg_periodic_work);
+	flush_work(&di->fg_work);
+	flush_work(&di->fg_acc_cur_work);
+	flush_delayed_work(&di->fg_reinit_work);
+	flush_delayed_work(&di->fg_low_bat_work);
+	flush_delayed_work(&di->fg_check_hw_failure_work);
+
+	/*
+	 * If the FG is enabled we will disable it before going to suspend
+	 * only if we're not charging
+	 */
+	if (di->flags.fg_enabled && !di->flags.charging)
+		ab8500_fg_coulomb_counter(di, false);
+
+	return 0;
+}
+
+/* ab8500 fg driver interrupts and their respective isr */
+static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
+	{"NCONV_ACCU", ab8500_fg_cc_convend_handler},
+	{"BATT_OVV", ab8500_fg_batt_ovv_handler},
+	{"LOW_BAT_F", ab8500_fg_lowbatf_handler},
+	{"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler},
+	{"CCEOC", ab8500_fg_cc_data_end_handler},
+};
+
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_usb",
+};
+
+static const struct power_supply_desc ab8500_fg_desc = {
+	.name			= "ab8500_fg",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= ab8500_fg_props,
+	.num_properties		= ARRAY_SIZE(ab8500_fg_props),
+	.get_property		= ab8500_fg_get_property,
+	.external_power_changed	= ab8500_fg_external_power_changed,
+};
+
+static int ab8500_fg_bind(struct device *dev, struct device *master,
+			  void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+
+	di->bat_cap.max_mah_design = di->bm->bi->charge_full_design_uah;
+	di->bat_cap.max_mah = di->bat_cap.max_mah_design;
+	di->vbat_nom_uv = di->bm->bi->voltage_max_design_uv;
+
+	/* Start the coulomb counter */
+	ab8500_fg_coulomb_counter(di, true);
+	/* Run the FG algorithm */
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+	return 0;
+}
+
+static void ab8500_fg_unbind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_fg *di = dev_get_drvdata(dev);
+	int ret;
+
+	/* Disable coulomb counter */
+	ret = ab8500_fg_coulomb_counter(di, false);
+	if (ret)
+		dev_err(dev, "failed to disable coulomb counter\n");
+
+	flush_workqueue(di->fg_wq);
+}
+
+static const struct component_ops ab8500_fg_component_ops = {
+	.bind = ab8500_fg_bind,
+	.unbind = ab8500_fg_unbind,
+};
+
+static int ab8500_fg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
+	struct ab8500_fg *di;
+	int i, irq;
+	int ret = 0;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	mutex_init(&di->cc_lock);
+
+	/* get parent data */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	di->main_bat_v = devm_iio_channel_get(dev, "main_bat_v");
+	if (IS_ERR(di->main_bat_v)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->main_bat_v),
+				    "failed to get main battery ADC channel\n");
+		return ret;
+	}
+
+	if (!of_property_read_u32(dev->of_node, "line-impedance-micro-ohms",
+				  &di->line_impedance_uohm))
+		dev_info(dev, "line impedance: %u uOhm\n",
+			 di->line_impedance_uohm);
+
+	psy_cfg.supplied_to = supply_interface;
+	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	psy_cfg.drv_data = di;
+
+	di->init_capacity = true;
+
+	ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+	ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+
+	/* Create a work queue for running the FG algorithm */
+	di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
+	if (di->fg_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Init work for running the fg algorithm instantly */
+	INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
+
+	/* Init work for getting the battery accumulated current */
+	INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work);
+
+	/* Init work for reinitialising the fg algorithm */
+	INIT_DEFERRABLE_WORK(&di->fg_reinit_work,
+		ab8500_fg_reinit_work);
+
+	/* Work delayed Queue to run the state machine */
+	INIT_DEFERRABLE_WORK(&di->fg_periodic_work,
+		ab8500_fg_periodic_work);
+
+	/* Work to check low battery condition */
+	INIT_DEFERRABLE_WORK(&di->fg_low_bat_work,
+		ab8500_fg_low_bat_work);
+
+	/* Init work for HW failure check */
+	INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
+		ab8500_fg_check_hw_failure_work);
+
+	/* Reset battery low voltage flag */
+	di->flags.low_bat = false;
+
+	/* Initialize low battery counter */
+	di->low_bat_cnt = 10;
+
+	/* Initialize OVV, and other registers */
+	ret = ab8500_fg_init_hw_registers(di);
+	if (ret) {
+		dev_err(dev, "failed to initialize registers\n");
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	/* Consider battery unknown until we're informed otherwise */
+	di->flags.batt_unknown = true;
+	di->flags.batt_id_received = false;
+
+	/* Register FG power supply class */
+	di->fg_psy = devm_power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
+	if (IS_ERR(di->fg_psy)) {
+		dev_err(dev, "failed to register FG psy\n");
+		destroy_workqueue(di->fg_wq);
+		return PTR_ERR(di->fg_psy);
+	}
+
+	di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+
+	/*
+	 * Initialize completion used to notify completion and start
+	 * of inst current
+	 */
+	init_completion(&di->ab8500_fg_started);
+	init_completion(&di->ab8500_fg_complete);
+
+	/* Register primary interrupt handlers */
+	for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
+		if (irq < 0) {
+			destroy_workqueue(di->fg_wq);
+			return irq;
+		}
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+				  ab8500_fg_irq[i].isr,
+				  IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+				  ab8500_fg_irq[i].name, di);
+
+		if (ret != 0) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n",
+				ab8500_fg_irq[i].name, irq, ret);
+			destroy_workqueue(di->fg_wq);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_fg_irq[i].name, irq, ret);
+	}
+
+	di->irq = platform_get_irq_byname(pdev, "CCEOC");
+	disable_irq(di->irq);
+	di->nbr_cceoc_irq_cnt = 0;
+
+	platform_set_drvdata(pdev, di);
+
+	ret = ab8500_fg_sysfs_init(di);
+	if (ret) {
+		dev_err(dev, "failed to create sysfs entry\n");
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	ret = ab8500_fg_sysfs_psy_create_attrs(di);
+	if (ret) {
+		dev_err(dev, "failed to create FG psy\n");
+		ab8500_fg_sysfs_exit(di);
+		destroy_workqueue(di->fg_wq);
+		return ret;
+	}
+
+	/* Calibrate the fg first time */
+	di->flags.calibrate = true;
+	di->calib_state = AB8500_FG_CALIB_INIT;
+
+	/* Use room temp as default value until we get an update from driver. */
+	di->bat_temp = 210;
+
+	list_add_tail(&di->node, &ab8500_fg_list);
+
+	return component_add(dev, &ab8500_fg_component_ops);
+}
+
+static int ab8500_fg_remove(struct platform_device *pdev)
+{
+	struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+	destroy_workqueue(di->fg_wq);
+	component_del(&pdev->dev, &ab8500_fg_component_ops);
+	list_del(&di->node);
+	ab8500_fg_sysfs_exit(di);
+	ab8500_fg_sysfs_psy_remove_attrs(di);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_fg_pm_ops, ab8500_fg_suspend, ab8500_fg_resume);
+
+static const struct of_device_id ab8500_fg_match[] = {
+	{ .compatible = "stericsson,ab8500-fg", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ab8500_fg_match);
+
+struct platform_driver ab8500_fg_driver = {
+	.probe = ab8500_fg_probe,
+	.remove = ab8500_fg_remove,
+	.driver = {
+		.name = "ab8500-fg",
+		.of_match_table = ab8500_fg_match,
+		.pm = &ab8500_fg_pm_ops,
+	},
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:ab8500-fg");
+MODULE_DESCRIPTION("AB8500 Fuel Gauge driver");
diff --git a/drivers/power/supply/acer_a500_battery.c b/drivers/power/supply/acer_a500_battery.c
new file mode 100644
index 000000000..32a0bfcac
--- /dev/null
+++ b/drivers/power/supply/acer_a500_battery.c
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Battery driver for Acer Iconia Tab A500.
+ *
+ * Copyright 2020 GRATE-driver project.
+ *
+ * Based on downstream driver from Acer Inc.
+ * Based on NVIDIA Gas Gauge driver for SBS Compliant Batteries.
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+enum {
+	REG_CAPACITY,
+	REG_VOLTAGE,
+	REG_CURRENT,
+	REG_DESIGN_CAPACITY,
+	REG_TEMPERATURE,
+};
+
+#define EC_DATA(_reg, _psp) {			\
+	.psp = POWER_SUPPLY_PROP_ ## _psp,	\
+	.reg = _reg,				\
+}
+
+static const struct battery_register {
+	enum power_supply_property psp;
+	unsigned int reg;
+} ec_data[] = {
+	[REG_CAPACITY]		= EC_DATA(0x00, CAPACITY),
+	[REG_VOLTAGE]		= EC_DATA(0x01, VOLTAGE_NOW),
+	[REG_CURRENT]		= EC_DATA(0x03, CURRENT_NOW),
+	[REG_DESIGN_CAPACITY]	= EC_DATA(0x08, CHARGE_FULL_DESIGN),
+	[REG_TEMPERATURE]	= EC_DATA(0x0a, TEMP),
+};
+
+static const enum power_supply_property a500_battery_properties[] = {
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+struct a500_battery {
+	struct delayed_work poll_work;
+	struct power_supply *psy;
+	struct regmap *regmap;
+	unsigned int capacity;
+};
+
+static bool a500_battery_update_capacity(struct a500_battery *bat)
+{
+	unsigned int capacity;
+	int err;
+
+	err = regmap_read(bat->regmap, ec_data[REG_CAPACITY].reg, &capacity);
+	if (err)
+		return false;
+
+	/* capacity can be >100% even if max value is 100% */
+	capacity = min(capacity, 100u);
+
+	if (bat->capacity != capacity) {
+		bat->capacity = capacity;
+		return true;
+	}
+
+	return false;
+}
+
+static int a500_battery_get_status(struct a500_battery *bat)
+{
+	if (bat->capacity < 100) {
+		if (power_supply_am_i_supplied(bat->psy))
+			return POWER_SUPPLY_STATUS_CHARGING;
+		else
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	return POWER_SUPPLY_STATUS_FULL;
+}
+
+static void a500_battery_unit_adjustment(struct device *dev,
+					 enum power_supply_property psp,
+					 union power_supply_propval *val)
+{
+	const unsigned int base_unit_conversion = 1000;
+	const unsigned int temp_kelvin_to_celsius = 2731;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval *= base_unit_conversion;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval -= temp_kelvin_to_celsius;
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!val->intval;
+		break;
+
+	default:
+		dev_dbg(dev,
+			"%s: no need for unit conversion %d\n", __func__, psp);
+	}
+}
+
+static int a500_battery_get_ec_data_index(struct device *dev,
+					  enum power_supply_property psp)
+{
+	unsigned int i;
+
+	/*
+	 * DESIGN_CAPACITY register always returns a non-zero value if
+	 * battery is connected and zero if disconnected, hence we'll use
+	 * it for judging the battery presence.
+	 */
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		psp = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+
+	for (i = 0; i < ARRAY_SIZE(ec_data); i++)
+		if (psp == ec_data[i].psp)
+			return i;
+
+	dev_dbg(dev, "%s: invalid property %u\n", __func__, psp);
+
+	return -EINVAL;
+}
+
+static int a500_battery_get_property(struct power_supply *psy,
+				     enum power_supply_property psp,
+				     union power_supply_propval *val)
+{
+	struct a500_battery *bat = power_supply_get_drvdata(psy);
+	struct device *dev = psy->dev.parent;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = a500_battery_get_status(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		a500_battery_update_capacity(bat);
+		val->intval = bat->capacity;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = a500_battery_get_ec_data_index(dev, psp);
+		if (ret < 0)
+			break;
+
+		ret = regmap_read(bat->regmap, ec_data[ret].reg, &val->intval);
+		break;
+
+	default:
+		dev_err(dev, "%s: invalid property %u\n", __func__, psp);
+		return -EINVAL;
+	}
+
+	if (!ret) {
+		/* convert units to match requirements of power supply class */
+		a500_battery_unit_adjustment(dev, psp, val);
+	}
+
+	dev_dbg(dev, "%s: property = %d, value = %x\n",
+		__func__, psp, val->intval);
+
+	/* return NODATA for properties if battery not presents */
+	if (ret)
+		return -ENODATA;
+
+	return 0;
+}
+
+static void a500_battery_poll_work(struct work_struct *work)
+{
+	struct a500_battery *bat;
+	bool capacity_changed;
+
+	bat = container_of(work, struct a500_battery, poll_work.work);
+	capacity_changed = a500_battery_update_capacity(bat);
+
+	if (capacity_changed)
+		power_supply_changed(bat->psy);
+
+	/* continuously send uevent notification */
+	schedule_delayed_work(&bat->poll_work, 30 * HZ);
+}
+
+static const struct power_supply_desc a500_battery_desc = {
+	.name = "ec-battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = a500_battery_properties,
+	.get_property = a500_battery_get_property,
+	.num_properties = ARRAY_SIZE(a500_battery_properties),
+	.external_power_changed = power_supply_changed,
+};
+
+static int a500_battery_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct a500_battery *bat;
+
+	bat = devm_kzalloc(&pdev->dev, sizeof(*bat), GFP_KERNEL);
+	if (!bat)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, bat);
+
+	psy_cfg.of_node = pdev->dev.parent->of_node;
+	psy_cfg.drv_data = bat;
+
+	bat->regmap = dev_get_regmap(pdev->dev.parent, "KB930");
+	if (!bat->regmap)
+		return -EINVAL;
+
+	bat->psy = devm_power_supply_register_no_ws(&pdev->dev,
+						    &a500_battery_desc,
+						    &psy_cfg);
+	if (IS_ERR(bat->psy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bat->psy),
+				     "failed to register battery\n");
+
+	INIT_DELAYED_WORK(&bat->poll_work, a500_battery_poll_work);
+	schedule_delayed_work(&bat->poll_work, HZ);
+
+	return 0;
+}
+
+static int a500_battery_remove(struct platform_device *pdev)
+{
+	struct a500_battery *bat = dev_get_drvdata(&pdev->dev);
+
+	cancel_delayed_work_sync(&bat->poll_work);
+
+	return 0;
+}
+
+static int __maybe_unused a500_battery_suspend(struct device *dev)
+{
+	struct a500_battery *bat = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&bat->poll_work);
+
+	return 0;
+}
+
+static int __maybe_unused a500_battery_resume(struct device *dev)
+{
+	struct a500_battery *bat = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&bat->poll_work, HZ);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(a500_battery_pm_ops,
+			 a500_battery_suspend, a500_battery_resume);
+
+static struct platform_driver a500_battery_driver = {
+	.driver = {
+		.name = "acer-a500-iconia-battery",
+		.pm = &a500_battery_pm_ops,
+	},
+	.probe = a500_battery_probe,
+	.remove = a500_battery_remove,
+};
+module_platform_driver(a500_battery_driver);
+
+MODULE_DESCRIPTION("Battery gauge driver for Acer Iconia Tab A500");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_ALIAS("platform:acer-a500-iconia-battery");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
new file mode 100644
index 000000000..e9b5f4283
--- /dev/null
+++ b/drivers/power/supply/act8945a_charger.c
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power supply driver for the Active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+
+static const char *act8945a_charger_model = "ACT8945A";
+static const char *act8945a_charger_manufacturer = "Active-semi";
+
+/*
+ * ACT8945A Charger Register Map
+ */
+
+/* 0x70: Reserved */
+#define ACT8945A_APCH_CFG		0x71
+#define ACT8945A_APCH_STATUS		0x78
+#define ACT8945A_APCH_CTRL		0x79
+#define ACT8945A_APCH_STATE		0x7A
+
+/* ACT8945A_APCH_CFG */
+#define APCH_CFG_OVPSET			(0x3 << 0)
+#define APCH_CFG_OVPSET_6V6		(0x0 << 0)
+#define APCH_CFG_OVPSET_7V		(0x1 << 0)
+#define APCH_CFG_OVPSET_7V5		(0x2 << 0)
+#define APCH_CFG_OVPSET_8V		(0x3 << 0)
+#define APCH_CFG_PRETIMO		(0x3 << 2)
+#define APCH_CFG_PRETIMO_40_MIN		(0x0 << 2)
+#define APCH_CFG_PRETIMO_60_MIN		(0x1 << 2)
+#define APCH_CFG_PRETIMO_80_MIN		(0x2 << 2)
+#define APCH_CFG_PRETIMO_DISABLED	(0x3 << 2)
+#define APCH_CFG_TOTTIMO		(0x3 << 4)
+#define APCH_CFG_TOTTIMO_3_HOUR		(0x0 << 4)
+#define APCH_CFG_TOTTIMO_4_HOUR		(0x1 << 4)
+#define APCH_CFG_TOTTIMO_5_HOUR		(0x2 << 4)
+#define APCH_CFG_TOTTIMO_DISABLED	(0x3 << 4)
+#define APCH_CFG_SUSCHG			(0x1 << 7)
+
+#define APCH_STATUS_CHGDAT		BIT(0)
+#define APCH_STATUS_INDAT		BIT(1)
+#define APCH_STATUS_TEMPDAT		BIT(2)
+#define APCH_STATUS_TIMRDAT		BIT(3)
+#define APCH_STATUS_CHGSTAT		BIT(4)
+#define APCH_STATUS_INSTAT		BIT(5)
+#define APCH_STATUS_TEMPSTAT		BIT(6)
+#define APCH_STATUS_TIMRSTAT		BIT(7)
+
+#define APCH_CTRL_CHGEOCOUT		BIT(0)
+#define APCH_CTRL_INDIS			BIT(1)
+#define APCH_CTRL_TEMPOUT		BIT(2)
+#define APCH_CTRL_TIMRPRE		BIT(3)
+#define APCH_CTRL_CHGEOCIN		BIT(4)
+#define APCH_CTRL_INCON			BIT(5)
+#define APCH_CTRL_TEMPIN		BIT(6)
+#define APCH_CTRL_TIMRTOT		BIT(7)
+
+#define APCH_STATE_ACINSTAT		(0x1 << 1)
+#define APCH_STATE_CSTATE		(0x3 << 4)
+#define APCH_STATE_CSTATE_SHIFT		4
+#define APCH_STATE_CSTATE_DISABLED	0x00
+#define APCH_STATE_CSTATE_EOC		0x01
+#define APCH_STATE_CSTATE_FAST		0x02
+#define APCH_STATE_CSTATE_PRE		0x03
+
+struct act8945a_charger {
+	struct power_supply *psy;
+	struct power_supply_desc desc;
+	struct regmap *regmap;
+	struct work_struct work;
+
+	bool init_done;
+	struct gpio_desc *lbo_gpio;
+	struct gpio_desc *chglev_gpio;
+};
+
+static int act8945a_get_charger_state(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_PRE:
+	case APCH_STATE_CSTATE_FAST:
+		*val = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case APCH_STATE_CSTATE_EOC:
+		if (status & APCH_STATUS_CHGDAT)
+			*val = POWER_SUPPLY_STATUS_FULL;
+		else
+			*val = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case APCH_STATE_CSTATE_DISABLED:
+	default:
+		if (!(status & APCH_STATUS_INDAT))
+			*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	}
+
+	return 0;
+}
+
+static int act8945a_get_charge_type(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_PRE:
+		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case APCH_STATE_CSTATE_FAST:
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case APCH_STATE_CSTATE_EOC:
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case APCH_STATE_CSTATE_DISABLED:
+	default:
+		if (!(status & APCH_STATUS_INDAT))
+			*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		else
+			*val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static int act8945a_get_battery_health(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state, config;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_DISABLED:
+		if (config & APCH_CFG_SUSCHG) {
+			*val = POWER_SUPPLY_HEALTH_UNKNOWN;
+		} else if (status & APCH_STATUS_INDAT) {
+			if (!(status & APCH_STATUS_TEMPDAT))
+				*val = POWER_SUPPLY_HEALTH_OVERHEAT;
+			else if (status & APCH_STATUS_TIMRDAT)
+				*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			else
+				*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		} else {
+			*val = POWER_SUPPLY_HEALTH_GOOD;
+		}
+		break;
+	case APCH_STATE_CSTATE_PRE:
+	case APCH_STATE_CSTATE_FAST:
+	case APCH_STATE_CSTATE_EOC:
+	default:
+		*val = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	}
+
+	return 0;
+}
+
+static int act8945a_get_capacity_level(struct act8945a_charger *charger,
+				       struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state, config;
+	int lbo_level = gpiod_get_value(charger->lbo_gpio);
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_PRE:
+		*val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		break;
+	case APCH_STATE_CSTATE_FAST:
+		if (lbo_level)
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+		else
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		break;
+	case APCH_STATE_CSTATE_EOC:
+		if (status & APCH_STATUS_CHGDAT)
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case APCH_STATE_CSTATE_DISABLED:
+	default:
+		if (config & APCH_CFG_SUSCHG) {
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		} else {
+			*val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+			if (!(status & APCH_STATUS_INDAT)) {
+				if (!lbo_level)
+					*val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+			}
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#define MAX_CURRENT_USB_HIGH	450000
+#define MAX_CURRENT_USB_LOW	90000
+#define MAX_CURRENT_USB_PRE	45000
+/*
+ * Riset(K) = 2336 * (1V/Ichg(mA)) - 0.205
+ * Riset = 2.43K
+ */
+#define MAX_CURRENT_AC_HIGH		886527
+#define MAX_CURRENT_AC_LOW		117305
+#define MAX_CURRENT_AC_HIGH_PRE		88653
+#define MAX_CURRENT_AC_LOW_PRE		11731
+
+static int act8945a_get_current_max(struct act8945a_charger *charger,
+				    struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state;
+	unsigned int acin_state;
+	int chgin_level = gpiod_get_value(charger->chglev_gpio);
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	acin_state = (state & APCH_STATE_ACINSTAT) >> 1;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_PRE:
+		if (acin_state) {
+			if (chgin_level)
+				*val = MAX_CURRENT_AC_HIGH_PRE;
+			else
+				*val = MAX_CURRENT_AC_LOW_PRE;
+		} else {
+			*val = MAX_CURRENT_USB_PRE;
+		}
+		break;
+	case APCH_STATE_CSTATE_FAST:
+		if (acin_state) {
+			if (chgin_level)
+				*val = MAX_CURRENT_AC_HIGH;
+			else
+				*val = MAX_CURRENT_AC_LOW;
+		} else {
+			if (chgin_level)
+				*val = MAX_CURRENT_USB_HIGH;
+			else
+				*val = MAX_CURRENT_USB_LOW;
+		}
+		break;
+	case APCH_STATE_CSTATE_EOC:
+	case APCH_STATE_CSTATE_DISABLED:
+	default:
+		*val = 0;
+		break;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property act8945a_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER
+};
+
+static int act8945a_charger_get_property(struct power_supply *psy,
+					 enum power_supply_property prop,
+					 union power_supply_propval *val)
+{
+	struct act8945a_charger *charger = power_supply_get_drvdata(psy);
+	struct regmap *regmap = charger->regmap;
+	int ret = 0;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = act8945a_get_charger_state(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = act8945a_get_charge_type(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = act8945a_get_battery_health(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		ret = act8945a_get_capacity_level(charger,
+						  regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		ret = act8945a_get_current_max(charger,
+					       regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = act8945a_charger_model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = act8945a_charger_manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int act8945a_enable_interrupt(struct act8945a_charger *charger)
+{
+	struct regmap *regmap = charger->regmap;
+	unsigned char ctrl;
+	int ret;
+
+	ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN |
+	       APCH_CTRL_INDIS | APCH_CTRL_INCON |
+	       APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN |
+	       APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT;
+	ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl);
+	if (ret)
+		return ret;
+
+	ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT |
+	       APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT;
+	ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static unsigned int act8945a_set_supply_type(struct act8945a_charger *charger,
+					     unsigned int *type)
+{
+	unsigned int status, state;
+	int ret;
+
+	ret = regmap_read(charger->regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(charger->regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	if (status & APCH_STATUS_INDAT) {
+		if (state & APCH_STATE_ACINSTAT)
+			*type = POWER_SUPPLY_TYPE_MAINS;
+		else
+			*type = POWER_SUPPLY_TYPE_USB;
+	} else {
+		*type = POWER_SUPPLY_TYPE_BATTERY;
+	}
+
+	return 0;
+}
+
+static void act8945a_work(struct work_struct *work)
+{
+	struct act8945a_charger *charger =
+			container_of(work, struct act8945a_charger, work);
+
+	act8945a_set_supply_type(charger, &charger->desc.type);
+
+	power_supply_changed(charger->psy);
+}
+
+static irqreturn_t act8945a_status_changed(int irq, void *dev_id)
+{
+	struct act8945a_charger *charger = dev_id;
+
+	if (charger->init_done)
+		schedule_work(&charger->work);
+
+	return IRQ_HANDLED;
+}
+
+#define DEFAULT_TOTAL_TIME_OUT		3
+#define DEFAULT_PRE_TIME_OUT		40
+#define DEFAULT_INPUT_OVP_THRESHOLD	6600
+
+static int act8945a_charger_config(struct device *dev,
+				   struct act8945a_charger *charger)
+{
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap = charger->regmap;
+
+	u32 total_time_out;
+	u32 pre_time_out;
+	u32 input_voltage_threshold;
+	int err, ret;
+
+	unsigned int tmp;
+	unsigned int value = 0;
+
+	if (!np) {
+		dev_err(dev, "no charger of node\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_read(regmap, ACT8945A_APCH_CFG, &tmp);
+	if (ret)
+		return ret;
+
+	if (tmp & APCH_CFG_SUSCHG) {
+		value |= APCH_CFG_SUSCHG;
+		dev_info(dev, "have been suspended\n");
+	}
+
+	charger->lbo_gpio = devm_gpiod_get_optional(dev, "active-semi,lbo",
+						    GPIOD_IN);
+	if (IS_ERR(charger->lbo_gpio)) {
+		err = PTR_ERR(charger->lbo_gpio);
+		dev_err(dev, "unable to claim gpio \"lbo\": %d\n", err);
+		return err;
+	}
+
+	ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
+			       act8945a_status_changed,
+			       (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+			       "act8945a_lbo_detect", charger);
+	if (ret)
+		dev_info(dev, "failed to request gpio \"lbo\" IRQ\n");
+
+	charger->chglev_gpio = devm_gpiod_get_optional(dev,
+						       "active-semi,chglev",
+						       GPIOD_IN);
+	if (IS_ERR(charger->chglev_gpio)) {
+		err = PTR_ERR(charger->chglev_gpio);
+		dev_err(dev, "unable to claim gpio \"chglev\": %d\n", err);
+		return err;
+	}
+
+	if (of_property_read_u32(np,
+				 "active-semi,input-voltage-threshold-microvolt",
+				 &input_voltage_threshold))
+		input_voltage_threshold = DEFAULT_INPUT_OVP_THRESHOLD;
+
+	if (of_property_read_u32(np,
+				 "active-semi,precondition-timeout",
+				 &pre_time_out))
+		pre_time_out = DEFAULT_PRE_TIME_OUT;
+
+	if (of_property_read_u32(np, "active-semi,total-timeout",
+				 &total_time_out))
+		total_time_out = DEFAULT_TOTAL_TIME_OUT;
+
+	switch (input_voltage_threshold) {
+	case 8000:
+		value |= APCH_CFG_OVPSET_8V;
+		break;
+	case 7500:
+		value |= APCH_CFG_OVPSET_7V5;
+		break;
+	case 7000:
+		value |= APCH_CFG_OVPSET_7V;
+		break;
+	case 6600:
+	default:
+		value |= APCH_CFG_OVPSET_6V6;
+		break;
+	}
+
+	switch (pre_time_out) {
+	case 60:
+		value |= APCH_CFG_PRETIMO_60_MIN;
+		break;
+	case 80:
+		value |= APCH_CFG_PRETIMO_80_MIN;
+		break;
+	case 0:
+		value |= APCH_CFG_PRETIMO_DISABLED;
+		break;
+	case 40:
+	default:
+		value |= APCH_CFG_PRETIMO_40_MIN;
+		break;
+	}
+
+	switch (total_time_out) {
+	case 4:
+		value |= APCH_CFG_TOTTIMO_4_HOUR;
+		break;
+	case 5:
+		value |= APCH_CFG_TOTTIMO_5_HOUR;
+		break;
+	case 0:
+		value |= APCH_CFG_TOTTIMO_DISABLED;
+		break;
+	case 3:
+	default:
+		value |= APCH_CFG_TOTTIMO_3_HOUR;
+		break;
+	}
+
+	return regmap_write(regmap, ACT8945A_APCH_CFG, value);
+}
+
+static int act8945a_charger_probe(struct platform_device *pdev)
+{
+	struct act8945a_charger *charger;
+	struct power_supply_config psy_cfg = {};
+	int irq, ret;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!charger->regmap) {
+		dev_err(&pdev->dev, "Parent did not provide regmap\n");
+		return -EINVAL;
+	}
+
+	ret = act8945a_charger_config(&pdev->dev, charger);
+	if (ret)
+		return ret;
+
+	irq = of_irq_get(pdev->dev.of_node, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "failed to find IRQ number\n");
+		return irq ?: -ENXIO;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,
+			       IRQF_TRIGGER_FALLING, "act8945a_interrupt",
+			       charger);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n");
+		return ret;
+	}
+
+	charger->desc.name = "act8945a-charger";
+	charger->desc.get_property = act8945a_charger_get_property;
+	charger->desc.properties = act8945a_charger_props;
+	charger->desc.num_properties = ARRAY_SIZE(act8945a_charger_props);
+
+	ret = act8945a_set_supply_type(charger, &charger->desc.type);
+	if (ret)
+		return -EINVAL;
+
+	psy_cfg.of_node	= pdev->dev.of_node;
+	psy_cfg.drv_data = charger;
+
+	charger->psy = devm_power_supply_register(&pdev->dev,
+						  &charger->desc,
+						  &psy_cfg);
+	if (IS_ERR(charger->psy)) {
+		dev_err(&pdev->dev, "failed to register power supply\n");
+		return PTR_ERR(charger->psy);
+	}
+
+	platform_set_drvdata(pdev, charger);
+
+	INIT_WORK(&charger->work, act8945a_work);
+
+	ret = act8945a_enable_interrupt(charger);
+	if (ret)
+		return -EIO;
+
+	charger->init_done = true;
+
+	return 0;
+}
+
+static int act8945a_charger_remove(struct platform_device *pdev)
+{
+	struct act8945a_charger *charger = platform_get_drvdata(pdev);
+
+	charger->init_done = false;
+	cancel_work_sync(&charger->work);
+
+	return 0;
+}
+
+static struct platform_driver act8945a_charger_driver = {
+	.driver	= {
+		.name = "act8945a-charger",
+	},
+	.probe	= act8945a_charger_probe,
+	.remove = act8945a_charger_remove,
+};
+module_platform_driver(act8945a_charger_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/adp5061.c b/drivers/power/supply/adp5061.c
new file mode 100644
index 000000000..fcf8ff0bc
--- /dev/null
+++ b/drivers/power/supply/adp5061.c
@@ -0,0 +1,747 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADP5061 I2C Programmable Linear Battery Charger
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* ADP5061 registers definition */
+#define ADP5061_ID			0x00
+#define ADP5061_REV			0x01
+#define ADP5061_VINX_SET		0x02
+#define ADP5061_TERM_SET		0x03
+#define ADP5061_CHG_CURR		0x04
+#define ADP5061_VOLTAGE_TH		0x05
+#define ADP5061_TIMER_SET		0x06
+#define ADP5061_FUNC_SET_1		0x07
+#define ADP5061_FUNC_SET_2		0x08
+#define ADP5061_INT_EN			0x09
+#define ADP5061_INT_ACT			0x0A
+#define ADP5061_CHG_STATUS_1		0x0B
+#define ADP5061_CHG_STATUS_2		0x0C
+#define ADP5061_FAULT			0x0D
+#define ADP5061_BATTERY_SHORT		0x10
+#define ADP5061_IEND			0x11
+
+/* ADP5061_VINX_SET */
+#define ADP5061_VINX_SET_ILIM_MSK		GENMASK(3, 0)
+#define ADP5061_VINX_SET_ILIM_MODE(x)		(((x) & 0x0F) << 0)
+
+/* ADP5061_TERM_SET */
+#define ADP5061_TERM_SET_VTRM_MSK		GENMASK(7, 2)
+#define ADP5061_TERM_SET_VTRM_MODE(x)		(((x) & 0x3F) << 2)
+#define ADP5061_TERM_SET_CHG_VLIM_MSK		GENMASK(1, 0)
+#define ADP5061_TERM_SET_CHG_VLIM_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_CHG_CURR */
+#define ADP5061_CHG_CURR_ICHG_MSK		GENMASK(6, 2)
+#define ADP5061_CHG_CURR_ICHG_MODE(x)		(((x) & 0x1F) << 2)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MSK		GENMASK(1, 0)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_VOLTAGE_TH */
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MSK		BIT(7)
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MODE(x)	(((x) & 0x01) << 7)
+#define ADP5061_VOLTAGE_TH_VRCH_MSK		GENMASK(6, 5)
+#define ADP5061_VOLTAGE_TH_VRCH_MODE(x)		(((x) & 0x03) << 5)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK	GENMASK(4, 3)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(x)	(((x) & 0x03) << 3)
+#define ADP5061_VOLTAGE_TH_VWEAK_MSK		GENMASK(2, 0)
+#define ADP5061_VOLTAGE_TH_VWEAK_MODE(x)	(((x) & 0x07) << 0)
+
+/* ADP5061_CHG_STATUS_1 */
+#define ADP5061_CHG_STATUS_1_VIN_OV(x)		(((x) >> 7) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_OK(x)		(((x) >> 6) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_ILIM(x)	(((x) >> 5) & 0x1)
+#define ADP5061_CHG_STATUS_1_THERM_LIM(x)	(((x) >> 4) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHDONE(x)		(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHG_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_CHG_STATUS_2 */
+#define ADP5061_CHG_STATUS_2_THR_STATUS(x)	(((x) >> 5) & 0x7)
+#define ADP5061_CHG_STATUS_2_RCH_LIM_INFO(x)	(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_2_BAT_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_IEND */
+#define ADP5061_IEND_IEND_MSK			GENMASK(7, 5)
+#define ADP5061_IEND_IEND_MODE(x)		(((x) & 0x07) << 5)
+
+#define ADP5061_NO_BATTERY	0x01
+#define ADP5061_ICHG_MAX	1300 // mA
+
+enum adp5061_chg_status {
+	ADP5061_CHG_OFF,
+	ADP5061_CHG_TRICKLE,
+	ADP5061_CHG_FAST_CC,
+	ADP5061_CHG_FAST_CV,
+	ADP5061_CHG_COMPLETE,
+	ADP5061_CHG_LDO_MODE,
+	ADP5061_CHG_TIMER_EXP,
+	ADP5061_CHG_BAT_DET,
+};
+
+static const int adp5061_chg_type[4] = {
+	[ADP5061_CHG_OFF] = POWER_SUPPLY_CHARGE_TYPE_NONE,
+	[ADP5061_CHG_TRICKLE] = POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+	[ADP5061_CHG_FAST_CC] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+	[ADP5061_CHG_FAST_CV] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
+static const int adp5061_vweak_th[8] = {
+	2700, 2800, 2900, 3000, 3100, 3200, 3300, 3400,
+};
+
+static const int adp5061_prechg_current[4] = {
+	5, 10, 20, 80,
+};
+
+static const int adp5061_vmin[4] = {
+	2000, 2500, 2600, 2900,
+};
+
+static const int adp5061_const_chg_vmax[4] = {
+	3200, 3400, 3700, 3800,
+};
+
+static const int adp5061_const_ichg[24] = {
+	50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650,
+	700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1200, 1300,
+};
+
+static const int adp5061_vmax[36] = {
+	3800, 3820, 3840, 3860, 3880, 3900, 3920, 3940, 3960, 3980,
+	4000, 4020, 4040, 4060, 4080, 4100, 4120, 4140, 4160, 4180,
+	4200, 4220, 4240, 4260, 4280, 4300, 4320, 4340, 4360, 4380,
+	4400, 4420, 4440, 4460, 4480, 4500,
+};
+
+static const int adp5061_in_current_lim[16] = {
+	100, 150, 200, 250, 300, 400, 500, 600, 700,
+	800, 900, 1000, 1200, 1500, 1800, 2100,
+};
+
+static const int adp5061_iend[8] = {
+	12500, 32500, 52500, 72500, 92500, 117500, 142500, 170000,
+};
+
+struct adp5061_state {
+	struct i2c_client		*client;
+	struct regmap			*regmap;
+	struct power_supply		*psy;
+};
+
+static int adp5061_get_array_index(const int *array, u8 size, int val)
+{
+	int i;
+
+	for (i = 1; i < size; i++) {
+		if (val < array[i])
+			break;
+	}
+
+	return i-1;
+}
+
+static int adp5061_get_status(struct adp5061_state *st,
+			      u8 *status1, u8 *status2)
+{
+	u8 buf[2];
+	int ret;
+
+	/* CHG_STATUS1 and CHG_STATUS2 are adjacent regs */
+	ret = regmap_bulk_read(st->regmap, ADP5061_CHG_STATUS_1,
+			       &buf[0], 2);
+	if (ret < 0)
+		return ret;
+
+	*status1 = buf[0];
+	*status2 = buf[1];
+
+	return ret;
+}
+
+static int adp5061_get_input_current_limit(struct adp5061_state *st,
+		union power_supply_propval *val)
+{
+	unsigned int regval;
+	int mode, ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VINX_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	mode = ADP5061_VINX_SET_ILIM_MODE(regval);
+	val->intval = adp5061_in_current_lim[mode] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_input_current_limit(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_in_current_lim,
+					ARRAY_SIZE(adp5061_in_current_lim),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VINX_SET,
+				  ADP5061_VINX_SET_ILIM_MSK,
+				  ADP5061_VINX_SET_ILIM_MODE(index));
+}
+
+static int adp5061_set_min_voltage(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_vmin,
+					ARRAY_SIZE(adp5061_vmin),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+				  ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK,
+				  ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_min_voltage(struct adp5061_state *st,
+				   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK) >> 3);
+	val->intval = adp5061_vmin[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_chg_volt_lim(struct adp5061_state *st,
+				    union power_supply_propval *val)
+{
+	unsigned int regval;
+	int mode, ret;
+
+	ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	mode = ADP5061_TERM_SET_CHG_VLIM_MODE(regval);
+	val->intval = adp5061_const_chg_vmax[mode] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_max_voltage(struct adp5061_state *st,
+				   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_TERM_SET_VTRM_MSK) >> 2) - 0x0F;
+	if (regval >= ARRAY_SIZE(adp5061_vmax))
+		regval = ARRAY_SIZE(adp5061_vmax) - 1;
+
+	val->intval = adp5061_vmax[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_max_voltage(struct adp5061_state *st, int val)
+{
+	int vmax_index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	if (val > 4500)
+		val = 4500;
+
+	vmax_index = adp5061_get_array_index(adp5061_vmax,
+					     ARRAY_SIZE(adp5061_vmax), val);
+	if (vmax_index < 0)
+		return vmax_index;
+
+	vmax_index += 0x0F;
+
+	return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+				  ADP5061_TERM_SET_VTRM_MSK,
+				  ADP5061_TERM_SET_VTRM_MODE(vmax_index));
+}
+
+static int adp5061_set_const_chg_vmax(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_const_chg_vmax,
+					ARRAY_SIZE(adp5061_const_chg_vmax),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+				  ADP5061_TERM_SET_CHG_VLIM_MSK,
+				  ADP5061_TERM_SET_CHG_VLIM_MODE(index));
+}
+
+static int adp5061_set_const_chg_current(struct adp5061_state *st, int val)
+{
+
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	if (val > ADP5061_ICHG_MAX)
+		val = ADP5061_ICHG_MAX;
+
+	index = adp5061_get_array_index(adp5061_const_ichg,
+					ARRAY_SIZE(adp5061_const_ichg),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+				  ADP5061_CHG_CURR_ICHG_MSK,
+				  ADP5061_CHG_CURR_ICHG_MODE(index));
+}
+
+static int adp5061_get_const_chg_current(struct adp5061_state *st,
+		union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_CHG_CURR_ICHG_MSK) >> 2);
+	if (regval >= ARRAY_SIZE(adp5061_const_ichg))
+		regval = ARRAY_SIZE(adp5061_const_ichg) - 1;
+
+	val->intval = adp5061_const_ichg[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_prechg_current(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval &= ADP5061_CHG_CURR_ITRK_DEAD_MSK;
+	val->intval = adp5061_prechg_current[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_prechg_current(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_prechg_current,
+					ARRAY_SIZE(adp5061_prechg_current),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+				  ADP5061_CHG_CURR_ITRK_DEAD_MSK,
+				  ADP5061_CHG_CURR_ITRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_vweak_th(struct adp5061_state *st,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval &= ADP5061_VOLTAGE_TH_VWEAK_MSK;
+	val->intval = adp5061_vweak_th[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_vweak_th(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_vweak_th,
+					ARRAY_SIZE(adp5061_vweak_th),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+				  ADP5061_VOLTAGE_TH_VWEAK_MSK,
+				  ADP5061_VOLTAGE_TH_VWEAK_MODE(index));
+}
+
+static int adp5061_get_chg_type(struct adp5061_state *st,
+				union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int chg_type, ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	chg_type = ADP5061_CHG_STATUS_1_CHG_STATUS(status1);
+	if (chg_type >= ARRAY_SIZE(adp5061_chg_type))
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+	else
+		val->intval = adp5061_chg_type[chg_type];
+
+	return ret;
+}
+
+static int adp5061_get_charger_status(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	switch (ADP5061_CHG_STATUS_1_CHG_STATUS(status1)) {
+	case ADP5061_CHG_OFF:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case ADP5061_CHG_TRICKLE:
+	case ADP5061_CHG_FAST_CC:
+	case ADP5061_CHG_FAST_CV:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case ADP5061_CHG_COMPLETE:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case ADP5061_CHG_TIMER_EXP:
+		/* The battery must be discharging if there is a charge fault */
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	return ret;
+}
+
+static int adp5061_get_battery_status(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	switch (ADP5061_CHG_STATUS_2_BAT_STATUS(status2)) {
+	case 0x0: /* Battery monitor off */
+	case 0x1: /* No battery */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		break;
+	case 0x2: /* VBAT < VTRK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		break;
+	case 0x3: /* VTRK < VBAT_SNS < VWEAK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		break;
+	case 0x4: /* VBAT_SNS > VWEAK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		break;
+	}
+
+	return ret;
+}
+
+static int adp5061_get_termination_current(struct adp5061_state *st,
+					   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_IEND, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = (regval & ADP5061_IEND_IEND_MSK) >> 5;
+	val->intval = adp5061_iend[regval];
+
+	return ret;
+}
+
+static int adp5061_set_termination_current(struct adp5061_state *st, int val)
+{
+	int index;
+
+	index = adp5061_get_array_index(adp5061_iend,
+					ARRAY_SIZE(adp5061_iend),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_IEND,
+				  ADP5061_IEND_IEND_MSK,
+				  ADP5061_IEND_IEND_MODE(index));
+}
+
+static int adp5061_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct adp5061_state *st = power_supply_get_drvdata(psy);
+	u8 status1, status2;
+	int mode, ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = adp5061_get_status(st, &status1, &status2);
+		if (ret < 0)
+			return ret;
+
+		mode = ADP5061_CHG_STATUS_2_BAT_STATUS(status2);
+		if (mode == ADP5061_NO_BATTERY)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return adp5061_get_chg_type(st, val);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		/* This property is used to indicate the input current
+		 * limit into VINx (ILIM)
+		 */
+		return adp5061_get_input_current_limit(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		/* This property is used to indicate the termination
+		 * voltage (VTRM)
+		 */
+		return adp5061_get_max_voltage(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		/*
+		 * This property is used to indicate the trickle to fast
+		 * charge threshold (VTRK_DEAD)
+		 */
+		return adp5061_get_min_voltage(st, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		/* This property is used to indicate the charging
+		 * voltage limit (CHG_VLIM)
+		 */
+		return adp5061_get_chg_volt_lim(st, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		/*
+		 * This property is used to indicate the value of the constant
+		 * current charge (ICHG)
+		 */
+		return adp5061_get_const_chg_current(st, val);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		/*
+		 * This property is used to indicate the value of the trickle
+		 * and weak charge currents (ITRK_DEAD)
+		 */
+		return adp5061_get_prechg_current(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to set the VWEAK threshold
+		 * bellow this value, weak charge mode is entered
+		 * above this value, fast chargerge mode is entered
+		 */
+		return adp5061_get_vweak_th(st, val);
+	case POWER_SUPPLY_PROP_STATUS:
+		/*
+		 * Indicate the charger status in relation to power
+		 * supply status property
+		 */
+		return adp5061_get_charger_status(st, val);
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		/*
+		 * Indicate the battery status in relation to power
+		 * supply capacity level property
+		 */
+		return adp5061_get_battery_status(st, val);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		/* Indicate the values of the termination current */
+		return adp5061_get_termination_current(st, val);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adp5061_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct adp5061_state *st = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return adp5061_set_input_current_limit(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		return adp5061_set_max_voltage(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return adp5061_set_min_voltage(st, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return adp5061_set_const_chg_vmax(st, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return adp5061_set_const_chg_current(st, val->intval);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return adp5061_set_prechg_current(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		return adp5061_set_vweak_th(st, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return adp5061_set_termination_current(st, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adp5061_prop_writeable(struct power_supply *psy,
+				  enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property adp5061_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static const struct regmap_config adp5061_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct power_supply_desc adp5061_desc = {
+	.name			= "adp5061",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.get_property		= adp5061_get_property,
+	.set_property		= adp5061_set_property,
+	.property_is_writeable	= adp5061_prop_writeable,
+	.properties		= adp5061_props,
+	.num_properties		= ARRAY_SIZE(adp5061_props),
+};
+
+static int adp5061_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct power_supply_config psy_cfg = {};
+	struct adp5061_state *st;
+
+	st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->client = client;
+	st->regmap = devm_regmap_init_i2c(client,
+					  &adp5061_regmap_config);
+	if (IS_ERR(st->regmap)) {
+		dev_err(&client->dev, "Failed to initialize register map\n");
+		return -EINVAL;
+	}
+
+	i2c_set_clientdata(client, st);
+	psy_cfg.drv_data = st;
+
+	st->psy = devm_power_supply_register(&client->dev,
+					     &adp5061_desc,
+					     &psy_cfg);
+
+	if (IS_ERR(st->psy)) {
+		dev_err(&client->dev, "Failed to register power supply\n");
+		return PTR_ERR(st->psy);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id adp5061_id[] = {
+	{ "adp5061", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp5061_id);
+
+static struct i2c_driver adp5061_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+	},
+	.probe = adp5061_probe,
+	.id_table = adp5061_id,
+};
+module_i2c_driver(adp5061_driver);
+
+MODULE_DESCRIPTION("Analog Devices adp5061 battery charger driver");
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/apm_power.c b/drivers/power/supply/apm_power.c
new file mode 100644
index 000000000..9d1a7fbca
--- /dev/null
+++ b/drivers/power/supply/apm_power.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2007 Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Author: Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+
+#define PSY_PROP(psy, prop, val) (power_supply_get_property(psy, \
+			 POWER_SUPPLY_PROP_##prop, val))
+
+#define _MPSY_PROP(prop, val) (power_supply_get_property(main_battery, \
+							 prop, val))
+
+#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
+
+static DEFINE_MUTEX(apm_mutex);
+static struct power_supply *main_battery;
+
+enum apm_source {
+	SOURCE_ENERGY,
+	SOURCE_CHARGE,
+	SOURCE_VOLTAGE,
+};
+
+struct find_bat_param {
+	struct power_supply *main;
+	struct power_supply *bat;
+	struct power_supply *max_charge_bat;
+	struct power_supply *max_energy_bat;
+	union power_supply_propval full;
+	int max_charge;
+	int max_energy;
+};
+
+static int __find_main_battery(struct device *dev, void *data)
+{
+	struct find_bat_param *bp = (struct find_bat_param *)data;
+
+	bp->bat = dev_get_drvdata(dev);
+
+	if (bp->bat->desc->use_for_apm) {
+		/* nice, we explicitly asked to report this battery. */
+		bp->main = bp->bat;
+		return 1;
+	}
+
+	if (!PSY_PROP(bp->bat, CHARGE_FULL_DESIGN, &bp->full) ||
+			!PSY_PROP(bp->bat, CHARGE_FULL, &bp->full)) {
+		if (bp->full.intval > bp->max_charge) {
+			bp->max_charge_bat = bp->bat;
+			bp->max_charge = bp->full.intval;
+		}
+	} else if (!PSY_PROP(bp->bat, ENERGY_FULL_DESIGN, &bp->full) ||
+			!PSY_PROP(bp->bat, ENERGY_FULL, &bp->full)) {
+		if (bp->full.intval > bp->max_energy) {
+			bp->max_energy_bat = bp->bat;
+			bp->max_energy = bp->full.intval;
+		}
+	}
+	return 0;
+}
+
+static void find_main_battery(void)
+{
+	struct find_bat_param bp;
+	int error;
+
+	memset(&bp, 0, sizeof(struct find_bat_param));
+	main_battery = NULL;
+	bp.main = main_battery;
+
+	error = class_for_each_device(power_supply_class, NULL, &bp,
+				      __find_main_battery);
+	if (error) {
+		main_battery = bp.main;
+		return;
+	}
+
+	if ((bp.max_energy_bat && bp.max_charge_bat) &&
+			(bp.max_energy_bat != bp.max_charge_bat)) {
+		/* try guess battery with more capacity */
+		if (!PSY_PROP(bp.max_charge_bat, VOLTAGE_MAX_DESIGN,
+			      &bp.full)) {
+			if (bp.max_energy > bp.max_charge * bp.full.intval)
+				main_battery = bp.max_energy_bat;
+			else
+				main_battery = bp.max_charge_bat;
+		} else if (!PSY_PROP(bp.max_energy_bat, VOLTAGE_MAX_DESIGN,
+								  &bp.full)) {
+			if (bp.max_charge > bp.max_energy / bp.full.intval)
+				main_battery = bp.max_charge_bat;
+			else
+				main_battery = bp.max_energy_bat;
+		} else {
+			/* give up, choice any */
+			main_battery = bp.max_energy_bat;
+		}
+	} else if (bp.max_charge_bat) {
+		main_battery = bp.max_charge_bat;
+	} else if (bp.max_energy_bat) {
+		main_battery = bp.max_energy_bat;
+	} else {
+		/* give up, try the last if any */
+		main_battery = bp.bat;
+	}
+}
+
+static int do_calculate_time(int status, enum apm_source source)
+{
+	union power_supply_propval full;
+	union power_supply_propval empty;
+	union power_supply_propval cur;
+	union power_supply_propval I;
+	enum power_supply_property full_prop;
+	enum power_supply_property full_design_prop;
+	enum power_supply_property empty_prop;
+	enum power_supply_property empty_design_prop;
+	enum power_supply_property cur_avg_prop;
+	enum power_supply_property cur_now_prop;
+
+	if (MPSY_PROP(CURRENT_AVG, &I)) {
+		/* if battery can't report average value, use momentary */
+		if (MPSY_PROP(CURRENT_NOW, &I))
+			return -1;
+	}
+
+	if (!I.intval)
+		return 0;
+
+	switch (source) {
+	case SOURCE_CHARGE:
+		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+		cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+		break;
+	case SOURCE_ENERGY:
+		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+		cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+		break;
+	case SOURCE_VOLTAGE:
+		full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+		full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+		empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+		empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+		cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+		cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+		break;
+	default:
+		printk(KERN_ERR "Unsupported source: %d\n", source);
+		return -1;
+	}
+
+	if (_MPSY_PROP(full_prop, &full)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(full_design_prop, &full))
+			return -1;
+	}
+
+	if (_MPSY_PROP(empty_prop, &empty)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(empty_design_prop, &empty))
+			empty.intval = 0;
+	}
+
+	if (_MPSY_PROP(cur_avg_prop, &cur)) {
+		/* if battery can't report average value, use momentary */
+		if (_MPSY_PROP(cur_now_prop, &cur))
+			return -1;
+	}
+
+	if (status == POWER_SUPPLY_STATUS_CHARGING)
+		return ((cur.intval - full.intval) * 60L) / I.intval;
+	else
+		return -((cur.intval - empty.intval) * 60L) / I.intval;
+}
+
+static int calculate_time(int status)
+{
+	int time;
+
+	time = do_calculate_time(status, SOURCE_ENERGY);
+	if (time != -1)
+		return time;
+
+	time = do_calculate_time(status, SOURCE_CHARGE);
+	if (time != -1)
+		return time;
+
+	time = do_calculate_time(status, SOURCE_VOLTAGE);
+	if (time != -1)
+		return time;
+
+	return -1;
+}
+
+static int calculate_capacity(enum apm_source source)
+{
+	enum power_supply_property full_prop, empty_prop;
+	enum power_supply_property full_design_prop, empty_design_prop;
+	enum power_supply_property now_prop, avg_prop;
+	union power_supply_propval empty, full, cur;
+	int ret;
+
+	switch (source) {
+	case SOURCE_CHARGE:
+		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+		avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+		break;
+	case SOURCE_ENERGY:
+		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+		avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+		break;
+	case SOURCE_VOLTAGE:
+		full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+		empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+		full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+		avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+		break;
+	default:
+		printk(KERN_ERR "Unsupported source: %d\n", source);
+		return -1;
+	}
+
+	if (_MPSY_PROP(full_prop, &full)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(full_design_prop, &full))
+			return -1;
+	}
+
+	if (_MPSY_PROP(avg_prop, &cur)) {
+		/* if battery can't report average value, use momentary */
+		if (_MPSY_PROP(now_prop, &cur))
+			return -1;
+	}
+
+	if (_MPSY_PROP(empty_prop, &empty)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(empty_design_prop, &empty))
+			empty.intval = 0;
+	}
+
+	if (full.intval - empty.intval)
+		ret =  ((cur.intval - empty.intval) * 100L) /
+		       (full.intval - empty.intval);
+	else
+		return -1;
+
+	if (ret > 100)
+		return 100;
+	else if (ret < 0)
+		return 0;
+
+	return ret;
+}
+
+static void apm_battery_apm_get_power_status(struct apm_power_info *info)
+{
+	union power_supply_propval status;
+	union power_supply_propval capacity, time_to_full, time_to_empty;
+
+	mutex_lock(&apm_mutex);
+	find_main_battery();
+	if (!main_battery) {
+		mutex_unlock(&apm_mutex);
+		return;
+	}
+
+	/* status */
+
+	if (MPSY_PROP(STATUS, &status))
+		status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	/* ac line status */
+
+	if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_FULL))
+		info->ac_line_status = APM_AC_ONLINE;
+	else
+		info->ac_line_status = APM_AC_OFFLINE;
+
+	/* battery life (i.e. capacity, in percents) */
+
+	if (MPSY_PROP(CAPACITY, &capacity) == 0) {
+		info->battery_life = capacity.intval;
+	} else {
+		/* try calculate using energy */
+		info->battery_life = calculate_capacity(SOURCE_ENERGY);
+		/* if failed try calculate using charge instead */
+		if (info->battery_life == -1)
+			info->battery_life = calculate_capacity(SOURCE_CHARGE);
+		if (info->battery_life == -1)
+			info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
+	}
+
+	/* charging status */
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	} else {
+		if (info->battery_life > 50)
+			info->battery_status = APM_BATTERY_STATUS_HIGH;
+		else if (info->battery_life > 5)
+			info->battery_status = APM_BATTERY_STATUS_LOW;
+		else
+			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+	}
+	info->battery_flag = info->battery_status;
+
+	/* time */
+
+	info->units = APM_UNITS_MINS;
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+		if (!MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full) ||
+				!MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
+			info->time = time_to_full.intval / 60;
+		else
+			info->time = calculate_time(status.intval);
+	} else {
+		if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
+			      !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
+			info->time = time_to_empty.intval / 60;
+		else
+			info->time = calculate_time(status.intval);
+	}
+
+	mutex_unlock(&apm_mutex);
+}
+
+static int __init apm_battery_init(void)
+{
+	printk(KERN_INFO "APM Battery Driver\n");
+
+	apm_get_power_status = apm_battery_apm_get_power_status;
+	return 0;
+}
+
+static void __exit apm_battery_exit(void)
+{
+	apm_get_power_status = NULL;
+}
+
+module_init(apm_battery_init);
+module_exit(apm_battery_exit);
+
+MODULE_AUTHOR("Eugeny Boger <eugenyboger@dgap.mipt.ru>");
+MODULE_DESCRIPTION("APM emulation driver for battery monitoring class");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
new file mode 100644
index 000000000..57e50208d
--- /dev/null
+++ b/drivers/power/supply/axp20x_ac_power.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AXP20X and AXP22X PMICs' ACIN power supply driver
+ *
+ * Copyright (C) 2016 Free Electrons
+ *	Quentin Schulz <quentin.schulz@free-electrons.com>
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+
+#define AXP20X_PWR_STATUS_ACIN_PRESENT	BIT(7)
+#define AXP20X_PWR_STATUS_ACIN_AVAIL	BIT(6)
+
+#define AXP813_ACIN_PATH_SEL		BIT(7)
+#define AXP813_ACIN_PATH_SEL_TO_BIT(x)	(!!(x) << 7)
+
+#define AXP813_VHOLD_MASK		GENMASK(5, 3)
+#define AXP813_VHOLD_UV_TO_BIT(x)	((((x) / 100000) - 40) << 3)
+#define AXP813_VHOLD_REG_TO_UV(x)	\
+	(((((x) & AXP813_VHOLD_MASK) >> 3) + 40) * 100000)
+
+#define AXP813_CURR_LIMIT_MASK		GENMASK(2, 0)
+#define AXP813_CURR_LIMIT_UA_TO_BIT(x)	(((x) / 500000) - 3)
+#define AXP813_CURR_LIMIT_REG_TO_UA(x)	\
+	((((x) & AXP813_CURR_LIMIT_MASK) + 3) * 500000)
+
+#define DRVNAME "axp20x-ac-power-supply"
+
+struct axp20x_ac_power {
+	struct regmap *regmap;
+	struct power_supply *supply;
+	struct iio_channel *acin_v;
+	struct iio_channel *acin_i;
+	bool has_acin_path_sel;
+	unsigned int num_irqs;
+	unsigned int irqs[];
+};
+
+static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
+{
+	struct axp20x_ac_power *power = devid;
+
+	power_supply_changed(power->supply);
+
+	return IRQ_HANDLED;
+}
+
+static int axp20x_ac_power_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+	int ret, reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+			return 0;
+		}
+
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		return 0;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT);
+		return 0;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
+
+		/* ACIN_PATH_SEL disables ACIN even if ACIN_AVAIL is set. */
+		if (val->intval && power->has_acin_path_sel) {
+			ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  &reg);
+			if (ret)
+				return ret;
+
+			val->intval = !!(reg & AXP813_ACIN_PATH_SEL);
+		}
+
+		return 0;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = iio_read_channel_processed(power->acin_v, &val->intval);
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mV but Power Supply framework gives uV */
+		val->intval *= 1000;
+
+		return 0;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = iio_read_channel_processed(power->acin_i, &val->intval);
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mA but Power Supply framework gives uA */
+		val->intval *= 1000;
+
+		return 0;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = AXP813_VHOLD_REG_TO_UV(reg);
+
+		return 0;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = AXP813_CURR_LIMIT_REG_TO_UA(reg);
+		/* AXP813 datasheet defines values 11x as 4000mA */
+		if (val->intval > 4000000)
+			val->intval = 4000000;
+
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp813_ac_power_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  AXP813_ACIN_PATH_SEL,
+					  AXP813_ACIN_PATH_SEL_TO_BIT(val->intval));
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		if (val->intval < 4000000 || val->intval > 4700000)
+			return -EINVAL;
+
+		return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  AXP813_VHOLD_MASK,
+					  AXP813_VHOLD_UV_TO_BIT(val->intval));
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (val->intval < 1500000 || val->intval > 4000000)
+			return -EINVAL;
+
+		return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+					  AXP813_CURR_LIMIT_MASK,
+					  AXP813_CURR_LIMIT_UA_TO_BIT(val->intval));
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp813_ac_power_prop_writeable(struct power_supply *psy,
+					  enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_ONLINE ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+	       psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT;
+}
+
+static enum power_supply_property axp20x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property axp813_ac_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc axp20x_ac_power_desc = {
+	.name = "axp20x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp20x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp22x_ac_power_desc = {
+	.name = "axp22x-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp22x_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
+	.get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp813_ac_power_desc = {
+	.name = "axp813-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = axp813_ac_power_properties,
+	.num_properties = ARRAY_SIZE(axp813_ac_power_properties),
+	.property_is_writeable = axp813_ac_power_prop_writeable,
+	.get_property = axp20x_ac_power_get_property,
+	.set_property = axp813_ac_power_set_property,
+};
+
+static const char * const axp20x_irq_names[] = {
+	"ACIN_PLUGIN",
+	"ACIN_REMOVAL",
+};
+
+struct axp_data {
+	const struct power_supply_desc	*power_desc;
+	const char * const		*irq_names;
+	unsigned int			num_irq_names;
+	bool				acin_adc;
+	bool				acin_path_sel;
+};
+
+static const struct axp_data axp20x_data = {
+	.power_desc	= &axp20x_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= true,
+	.acin_path_sel	= false,
+};
+
+static const struct axp_data axp22x_data = {
+	.power_desc	= &axp22x_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= false,
+	.acin_path_sel	= false,
+};
+
+static const struct axp_data axp813_data = {
+	.power_desc	= &axp813_ac_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.acin_adc	= false,
+	.acin_path_sel	= true,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int axp20x_ac_power_suspend(struct device *dev)
+{
+	struct axp20x_ac_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	/*
+	 * Allow wake via ACIN_PLUGIN only.
+	 *
+	 * As nested threaded IRQs are not automatically disabled during
+	 * suspend, we must explicitly disable the remainder of the IRQs.
+	 */
+	if (device_may_wakeup(&power->supply->dev))
+		enable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		disable_irq(power->irqs[i++]);
+
+	return 0;
+}
+
+static int axp20x_ac_power_resume(struct device *dev)
+{
+	struct axp20x_ac_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	if (device_may_wakeup(&power->supply->dev))
+		disable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		enable_irq(power->irqs[i++]);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(axp20x_ac_power_pm_ops, axp20x_ac_power_suspend,
+						 axp20x_ac_power_resume);
+
+static int axp20x_ac_power_probe(struct platform_device *pdev)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct axp20x_ac_power *power;
+	const struct axp_data *axp_data;
+	int i, irq, ret;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	if (!axp20x) {
+		dev_err(&pdev->dev, "Parent drvdata not set\n");
+		return -EINVAL;
+	}
+
+	axp_data = of_device_get_match_data(&pdev->dev);
+
+	power = devm_kzalloc(&pdev->dev,
+			     struct_size(power, irqs, axp_data->num_irq_names),
+			     GFP_KERNEL);
+	if (!power)
+		return -ENOMEM;
+
+	if (axp_data->acin_adc) {
+		power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
+		if (IS_ERR(power->acin_v)) {
+			if (PTR_ERR(power->acin_v) == -ENODEV)
+				return -EPROBE_DEFER;
+			return PTR_ERR(power->acin_v);
+		}
+
+		power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i");
+		if (IS_ERR(power->acin_i)) {
+			if (PTR_ERR(power->acin_i) == -ENODEV)
+				return -EPROBE_DEFER;
+			return PTR_ERR(power->acin_i);
+		}
+	}
+
+	power->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	power->has_acin_path_sel = axp_data->acin_path_sel;
+	power->num_irqs = axp_data->num_irq_names;
+
+	platform_set_drvdata(pdev, power);
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = power;
+
+	power->supply = devm_power_supply_register(&pdev->dev,
+						   axp_data->power_desc,
+						   &psy_cfg);
+	if (IS_ERR(power->supply))
+		return PTR_ERR(power->supply);
+
+	/* Request irqs after registering, as irqs may trigger immediately */
+	for (i = 0; i < axp_data->num_irq_names; i++) {
+		irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
+		if (irq < 0)
+			return irq;
+
+		power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+		ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
+						   axp20x_ac_power_irq, 0,
+						   DRVNAME, power);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
+				axp_data->irq_names[i], ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id axp20x_ac_power_match[] = {
+	{
+		.compatible = "x-powers,axp202-ac-power-supply",
+		.data = &axp20x_data,
+	}, {
+		.compatible = "x-powers,axp221-ac-power-supply",
+		.data = &axp22x_data,
+	}, {
+		.compatible = "x-powers,axp813-ac-power-supply",
+		.data = &axp813_data,
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
+
+static struct platform_driver axp20x_ac_power_driver = {
+	.probe = axp20x_ac_power_probe,
+	.driver = {
+		.name		= DRVNAME,
+		.of_match_table	= axp20x_ac_power_match,
+		.pm		= &axp20x_ac_power_pm_ops,
+	},
+};
+
+module_platform_driver(axp20x_ac_power_driver);
+
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
new file mode 100644
index 000000000..9106077c0
--- /dev/null
+++ b/drivers/power/supply/axp20x_battery.c
@@ -0,0 +1,660 @@
+/*
+ * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
+ *
+ * Copyright 2016 Free Electrons NextThing Co.
+ *	Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This driver is based on a previous upstreaming attempt by:
+ *	Bruno Prémont <bonbons@linux-vserver.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/axp20x.h>
+
+#define AXP20X_PWR_STATUS_BAT_CHARGING	BIT(2)
+
+#define AXP20X_PWR_OP_BATT_PRESENT	BIT(5)
+#define AXP20X_PWR_OP_BATT_ACTIVATED	BIT(3)
+
+#define AXP209_FG_PERCENT		GENMASK(6, 0)
+#define AXP22X_FG_VALID			BIT(7)
+
+#define AXP20X_CHRG_CTRL1_ENABLE	BIT(7)
+#define AXP20X_CHRG_CTRL1_TGT_VOLT	GENMASK(6, 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_1V	(0 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_15V	(1 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_2V	(2 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_36V	(3 << 5)
+
+#define AXP22X_CHRG_CTRL1_TGT_4_22V	(1 << 5)
+#define AXP22X_CHRG_CTRL1_TGT_4_24V	(3 << 5)
+
+#define AXP813_CHRG_CTRL1_TGT_4_35V	(3 << 5)
+
+#define AXP20X_CHRG_CTRL1_TGT_CURR	GENMASK(3, 0)
+
+#define AXP20X_V_OFF_MASK		GENMASK(2, 0)
+
+struct axp20x_batt_ps;
+
+struct axp_data {
+	int	ccc_scale;
+	int	ccc_offset;
+	bool	has_fg_valid;
+	int	(*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
+	int	(*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
+};
+
+struct axp20x_batt_ps {
+	struct regmap *regmap;
+	struct power_supply *batt;
+	struct device *dev;
+	struct iio_channel *batt_chrg_i;
+	struct iio_channel *batt_dischrg_i;
+	struct iio_channel *batt_v;
+	/* Maximum constant charge current */
+	unsigned int max_ccc;
+	const struct axp_data	*data;
+};
+
+static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
+{
+	int ret, reg;
+
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_15V:
+		*val = 4150000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_36V:
+		*val = 4360000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
+{
+	int ret, reg;
+
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP22X_CHRG_CTRL1_TGT_4_22V:
+		*val = 4220000;
+		break;
+	case AXP22X_CHRG_CTRL1_TGT_4_24V:
+		*val = 4240000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int *val)
+{
+	int ret, reg;
+
+	ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+	case AXP20X_CHRG_CTRL1_TGT_4_1V:
+		*val = 4100000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_15V:
+		*val = 4150000;
+		break;
+	case AXP20X_CHRG_CTRL1_TGT_4_2V:
+		*val = 4200000;
+		break;
+	case AXP813_CHRG_CTRL1_TGT_4_35V:
+		*val = 4350000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
+					      int *val)
+{
+	int ret;
+
+	ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
+	if (ret)
+		return ret;
+
+	*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
+
+	*val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
+
+	return 0;
+}
+
+static int axp20x_battery_get_prop(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
+	int ret = 0, reg, val1;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+				  &reg);
+		if (ret)
+			return ret;
+
+		val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
+				  &reg);
+		if (ret)
+			return ret;
+
+		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			return 0;
+		}
+
+		ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
+						 &val1);
+		if (ret)
+			return ret;
+
+		if (val1) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			return 0;
+		}
+
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
+		if (ret)
+			return ret;
+
+		/*
+		 * Fuel Gauge data takes 7 bits but the stored value seems to be
+		 * directly the raw percentage without any scaling to 7 bits.
+		 */
+		if ((val1 & AXP209_FG_PERCENT) == 100)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+				  &val1);
+		if (ret)
+			return ret;
+
+		if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+			return 0;
+		}
+
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = axp20x_get_constant_charge_current(axp20x_batt,
+							 &val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = axp20x_batt->max_ccc;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
+				  &reg);
+		if (ret)
+			return ret;
+
+		if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
+			ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval);
+		} else {
+			ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1);
+			val->intval = -val1;
+		}
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mA but Power Supply framework gives uA */
+		val->intval *= 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		/* When no battery is present, return capacity is 100% */
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+				  &reg);
+		if (ret)
+			return ret;
+
+		if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
+			val->intval = 100;
+			return 0;
+		}
+
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &reg);
+		if (ret)
+			return ret;
+
+		if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
+			return -EINVAL;
+
+		/*
+		 * Fuel Gauge data takes 7 bits but the stored value seems to be
+		 * directly the raw percentage without any scaling to 7 bits.
+		 */
+		val->intval = reg & AXP209_FG_PERCENT;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		return axp20x_batt->data->get_max_voltage(axp20x_batt,
+							  &val->intval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
+		if (ret)
+			return ret;
+
+		val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = iio_read_channel_processed(axp20x_batt->batt_v,
+						 &val->intval);
+		if (ret)
+			return ret;
+
+		/* IIO framework gives mV but Power Supply framework gives uV */
+		val->intval *= 1000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int val)
+{
+	switch (val) {
+	case 4100000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+		break;
+
+	case 4200000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+		break;
+
+	default:
+		/*
+		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+		 * can be set to 4.22V and 4.24V, but these voltages are too
+		 * high for Lithium based batteries (AXP PMICs are supposed to
+		 * be used with these kinds of battery).
+		 */
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
+static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+					  int val)
+{
+	switch (val) {
+	case 4100000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+		break;
+
+	case 4150000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_15V;
+		break;
+
+	case 4200000:
+		val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+		break;
+
+	default:
+		/*
+		 * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+		 * can be set to 4.22V and 4.24V, but these voltages are too
+		 * high for Lithium based batteries (AXP PMICs are supposed to
+		 * be used with these kinds of battery).
+		 */
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				  AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
+static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
+					      int charge_current)
+{
+	if (charge_current > axp_batt->max_ccc)
+		return -EINVAL;
+
+	charge_current = (charge_current - axp_batt->data->ccc_offset) /
+		axp_batt->data->ccc_scale;
+
+	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
+		return -EINVAL;
+
+	return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
+				  AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
+}
+
+static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
+						  int charge_current)
+{
+	bool lower_max = false;
+
+	charge_current = (charge_current - axp->data->ccc_offset) /
+		axp->data->ccc_scale;
+
+	if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
+		return -EINVAL;
+
+	charge_current = charge_current * axp->data->ccc_scale +
+		axp->data->ccc_offset;
+
+	if (charge_current > axp->max_ccc)
+		dev_warn(axp->dev,
+			 "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
+	else
+		lower_max = true;
+
+	axp->max_ccc = charge_current;
+
+	if (lower_max) {
+		int current_cc;
+
+		axp20x_get_constant_charge_current(axp, &current_cc);
+		if (current_cc > charge_current)
+			axp20x_set_constant_charge_current(axp, charge_current);
+	}
+
+	return 0;
+}
+static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
+					 int min_voltage)
+{
+	int val1 = (min_voltage - 2600000) / 100000;
+
+	if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
+		return -EINVAL;
+
+	return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
+				  AXP20X_V_OFF_MASK, val1);
+}
+
+static int axp20x_battery_set_prop(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   const union power_supply_propval *val)
+{
+	struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return axp20x_set_constant_charge_current(axp20x_batt,
+							  val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return axp20x_set_max_constant_charge_current(axp20x_batt,
+							      val->intval);
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				AXP20X_CHRG_CTRL1_ENABLE, AXP20X_CHRG_CTRL1_ENABLE);
+
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+				AXP20X_CHRG_CTRL1_ENABLE, 0);
+		}
+		fallthrough;
+	default:
+		return -EINVAL;
+	}
+}
+
+static enum power_supply_property axp20x_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int axp20x_battery_prop_writeable(struct power_supply *psy,
+					 enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_STATUS ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
+	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
+	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+}
+
+static const struct power_supply_desc axp20x_batt_ps_desc = {
+	.name = "axp20x-battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = axp20x_battery_props,
+	.num_properties = ARRAY_SIZE(axp20x_battery_props),
+	.property_is_writeable = axp20x_battery_prop_writeable,
+	.get_property = axp20x_battery_get_prop,
+	.set_property = axp20x_battery_set_prop,
+};
+
+static const struct axp_data axp209_data = {
+	.ccc_scale = 100000,
+	.ccc_offset = 300000,
+	.get_max_voltage = axp20x_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp221_data = {
+	.ccc_scale = 150000,
+	.ccc_offset = 300000,
+	.has_fg_valid = true,
+	.get_max_voltage = axp22x_battery_get_max_voltage,
+	.set_max_voltage = axp22x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp813_data = {
+	.ccc_scale = 200000,
+	.ccc_offset = 200000,
+	.has_fg_valid = true,
+	.get_max_voltage = axp813_battery_get_max_voltage,
+	.set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct of_device_id axp20x_battery_ps_id[] = {
+	{
+		.compatible = "x-powers,axp209-battery-power-supply",
+		.data = (void *)&axp209_data,
+	}, {
+		.compatible = "x-powers,axp221-battery-power-supply",
+		.data = (void *)&axp221_data,
+	}, {
+		.compatible = "x-powers,axp813-battery-power-supply",
+		.data = (void *)&axp813_data,
+	}, { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
+
+static int axp20x_power_probe(struct platform_device *pdev)
+{
+	struct axp20x_batt_ps *axp20x_batt;
+	struct power_supply_config psy_cfg = {};
+	struct power_supply_battery_info *info;
+	struct device *dev = &pdev->dev;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
+				   GFP_KERNEL);
+	if (!axp20x_batt)
+		return -ENOMEM;
+
+	axp20x_batt->dev = &pdev->dev;
+
+	axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
+	if (IS_ERR(axp20x_batt->batt_v)) {
+		if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(axp20x_batt->batt_v);
+	}
+
+	axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
+							"batt_chrg_i");
+	if (IS_ERR(axp20x_batt->batt_chrg_i)) {
+		if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(axp20x_batt->batt_chrg_i);
+	}
+
+	axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
+							   "batt_dischrg_i");
+	if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
+		if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(axp20x_batt->batt_dischrg_i);
+	}
+
+	axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	platform_set_drvdata(pdev, axp20x_batt);
+
+	psy_cfg.drv_data = axp20x_batt;
+	psy_cfg.of_node = pdev->dev.of_node;
+
+	axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
+
+	axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
+						       &axp20x_batt_ps_desc,
+						       &psy_cfg);
+	if (IS_ERR(axp20x_batt->batt)) {
+		dev_err(&pdev->dev, "failed to register power supply: %ld\n",
+			PTR_ERR(axp20x_batt->batt));
+		return PTR_ERR(axp20x_batt->batt);
+	}
+
+	if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
+		int vmin = info->voltage_min_design_uv;
+		int ccc = info->constant_charge_current_max_ua;
+
+		if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
+							      vmin))
+			dev_err(&pdev->dev,
+				"couldn't set voltage_min_design\n");
+
+		/* Set max to unverified value to be able to set CCC */
+		axp20x_batt->max_ccc = ccc;
+
+		if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
+								   ccc)) {
+			dev_err(&pdev->dev,
+				"couldn't set constant charge current from DT: fallback to minimum value\n");
+			ccc = 300000;
+			axp20x_batt->max_ccc = ccc;
+			axp20x_set_constant_charge_current(axp20x_batt, ccc);
+		}
+	}
+
+	/*
+	 * Update max CCC to a valid value if battery info is present or set it
+	 * to current register value by default.
+	 */
+	axp20x_get_constant_charge_current(axp20x_batt,
+					   &axp20x_batt->max_ccc);
+
+	return 0;
+}
+
+static struct platform_driver axp20x_batt_driver = {
+	.probe    = axp20x_power_probe,
+	.driver   = {
+		.name  = "axp20x-battery-power-supply",
+		.of_match_table = axp20x_battery_ps_id,
+	},
+};
+
+module_platform_driver(axp20x_batt_driver);
+
+MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
new file mode 100644
index 000000000..a1e6d1d44
--- /dev/null
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AXP20x PMIC USB power supply status driver
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/devm-helpers.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/workqueue.h>
+
+#define DRVNAME "axp20x-usb-power-supply"
+
+#define AXP20X_PWR_STATUS_VBUS_PRESENT	BIT(5)
+#define AXP20X_PWR_STATUS_VBUS_USED	BIT(4)
+
+#define AXP20X_USB_STATUS_VBUS_VALID	BIT(2)
+
+#define AXP20X_VBUS_PATH_SEL		BIT(7)
+#define AXP20X_VBUS_PATH_SEL_OFFSET	7
+
+#define AXP20X_VBUS_VHOLD_uV(b)		(4000000 + (((b) >> 3) & 7) * 100000)
+#define AXP20X_VBUS_VHOLD_MASK		GENMASK(5, 3)
+#define AXP20X_VBUS_VHOLD_OFFSET	3
+#define AXP20X_VBUS_CLIMIT_MASK		3
+#define AXP20X_VBUS_CLIMIT_900mA	0
+#define AXP20X_VBUS_CLIMIT_500mA	1
+#define AXP20X_VBUS_CLIMIT_100mA	2
+#define AXP20X_VBUS_CLIMIT_NONE		3
+
+#define AXP813_VBUS_CLIMIT_900mA	0
+#define AXP813_VBUS_CLIMIT_1500mA	1
+#define AXP813_VBUS_CLIMIT_2000mA	2
+#define AXP813_VBUS_CLIMIT_2500mA	3
+
+#define AXP20X_ADC_EN1_VBUS_CURR	BIT(2)
+#define AXP20X_ADC_EN1_VBUS_VOLT	BIT(3)
+
+#define AXP20X_VBUS_MON_VBUS_VALID	BIT(3)
+
+#define AXP813_BC_EN		BIT(0)
+
+/*
+ * Note do not raise the debounce time, we must report Vusb high within
+ * 100ms otherwise we get Vbus errors in musb.
+ */
+#define DEBOUNCE_TIME			msecs_to_jiffies(50)
+
+struct axp20x_usb_power {
+	struct regmap *regmap;
+	struct power_supply *supply;
+	enum axp20x_variants axp20x_id;
+	struct iio_channel *vbus_v;
+	struct iio_channel *vbus_i;
+	struct delayed_work vbus_detect;
+	unsigned int old_status;
+	unsigned int online;
+	unsigned int num_irqs;
+	unsigned int irqs[];
+};
+
+static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
+{
+	/*
+	 * Polling is only necessary while VBUS is offline. While online, a
+	 * present->absent transition implies an online->offline transition
+	 * and will trigger the VBUS_REMOVAL IRQ.
+	 */
+	if (power->axp20x_id >= AXP221_ID && !power->online)
+		return true;
+
+	return false;
+}
+
+static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
+{
+	struct axp20x_usb_power *power = devid;
+
+	power_supply_changed(power->supply);
+
+	mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
+
+	return IRQ_HANDLED;
+}
+
+static void axp20x_usb_power_poll_vbus(struct work_struct *work)
+{
+	struct axp20x_usb_power *power =
+		container_of(work, struct axp20x_usb_power, vbus_detect.work);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+	if (ret)
+		goto out;
+
+	val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED);
+	if (val != power->old_status)
+		power_supply_changed(power->supply);
+
+	power->old_status = val;
+	power->online = val & AXP20X_PWR_STATUS_VBUS_USED;
+
+out:
+	if (axp20x_usb_vbus_needs_polling(power))
+		mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
+}
+
+static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val)
+{
+	unsigned int v;
+	int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+
+	if (ret)
+		return ret;
+
+	switch (v & AXP20X_VBUS_CLIMIT_MASK) {
+	case AXP20X_VBUS_CLIMIT_100mA:
+		if (power->axp20x_id == AXP221_ID)
+			*val = -1; /* No 100mA limit */
+		else
+			*val = 100000;
+		break;
+	case AXP20X_VBUS_CLIMIT_500mA:
+		*val = 500000;
+		break;
+	case AXP20X_VBUS_CLIMIT_900mA:
+		*val = 900000;
+		break;
+	case AXP20X_VBUS_CLIMIT_NONE:
+		*val = -1;
+		break;
+	}
+
+	return 0;
+}
+
+static int axp813_get_current_max(struct axp20x_usb_power *power, int *val)
+{
+	unsigned int v;
+	int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+
+	if (ret)
+		return ret;
+
+	switch (v & AXP20X_VBUS_CLIMIT_MASK) {
+	case AXP813_VBUS_CLIMIT_900mA:
+		*val = 900000;
+		break;
+	case AXP813_VBUS_CLIMIT_1500mA:
+		*val = 1500000;
+		break;
+	case AXP813_VBUS_CLIMIT_2000mA:
+		*val = 2000000;
+		break;
+	case AXP813_VBUS_CLIMIT_2500mA:
+		*val = 2500000;
+		break;
+	}
+	return 0;
+}
+
+static int axp20x_usb_power_get_property(struct power_supply *psy,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+	unsigned int input, v;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+		if (ret)
+			return ret;
+
+		val->intval = AXP20X_VBUS_VHOLD_uV(v);
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+			ret = iio_read_channel_processed(power->vbus_v,
+							 &val->intval);
+			if (ret)
+				return ret;
+
+			/*
+			 * IIO framework gives mV but Power Supply framework
+			 * gives uV.
+			 */
+			val->intval *= 1000;
+			return 0;
+		}
+
+		ret = axp20x_read_variable_width(power->regmap,
+						 AXP20X_VBUS_V_ADC_H, 12);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 1700; /* 1 step = 1.7 mV */
+		return 0;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		if (power->axp20x_id == AXP813_ID)
+			return axp813_get_current_max(power, &val->intval);
+		return axp20x_get_current_max(power, &val->intval);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+			ret = iio_read_channel_processed(power->vbus_i,
+							 &val->intval);
+			if (ret)
+				return ret;
+
+			/*
+			 * IIO framework gives mA but Power Supply framework
+			 * gives uA.
+			 */
+			val->intval *= 1000;
+			return 0;
+		}
+
+		ret = axp20x_read_variable_width(power->regmap,
+						 AXP20X_VBUS_I_ADC_H, 12);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret * 375; /* 1 step = 0.375 mA */
+		return 0;
+	default:
+		break;
+	}
+
+	/* All the properties below need the input-status reg value */
+	ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) {
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+			break;
+		}
+
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+		if (power->axp20x_id == AXP202_ID) {
+			ret = regmap_read(power->regmap,
+					  AXP20X_USB_OTG_STATUS, &v);
+			if (ret)
+				return ret;
+
+			if (!(v & AXP20X_USB_STATUS_VBUS_VALID))
+				val->intval =
+					POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		}
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int axp813_usb_power_set_online(struct axp20x_usb_power *power,
+				       int intval)
+{
+	int val = !intval << AXP20X_VBUS_PATH_SEL_OFFSET;
+
+	return regmap_update_bits(power->regmap,
+				  AXP20X_VBUS_IPSOUT_MGMT,
+				  AXP20X_VBUS_PATH_SEL, val);
+}
+
+static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
+					    int intval)
+{
+	int val;
+
+	switch (intval) {
+	case 4000000:
+	case 4100000:
+	case 4200000:
+	case 4300000:
+	case 4400000:
+	case 4500000:
+	case 4600000:
+	case 4700000:
+		val = (intval - 4000000) / 100000;
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_VHOLD_MASK,
+					  val << AXP20X_VBUS_VHOLD_OFFSET);
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power,
+					    int intval)
+{
+	int val;
+
+	switch (intval) {
+	case 900000:
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_CLIMIT_MASK,
+					  AXP813_VBUS_CLIMIT_900mA);
+	case 1500000:
+	case 2000000:
+	case 2500000:
+		val = (intval - 1000000) / 500000;
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_CLIMIT_MASK, val);
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
+					    int intval)
+{
+	int val;
+
+	switch (intval) {
+	case 100000:
+		if (power->axp20x_id == AXP221_ID)
+			return -EINVAL;
+		fallthrough;
+	case 500000:
+	case 900000:
+		val = (900000 - intval) / 400000;
+		return regmap_update_bits(power->regmap,
+					  AXP20X_VBUS_IPSOUT_MGMT,
+					  AXP20X_VBUS_CLIMIT_MASK, val);
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_set_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 const union power_supply_propval *val)
+{
+	struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (power->axp20x_id != AXP813_ID)
+			return -EINVAL;
+		return axp813_usb_power_set_online(power, val->intval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return axp20x_usb_power_set_voltage_min(power, val->intval);
+
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		if (power->axp20x_id == AXP813_ID)
+			return axp813_usb_power_set_current_max(power,
+								val->intval);
+		return axp20x_usb_power_set_current_max(power, val->intval);
+
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
+					   enum power_supply_property psp)
+{
+	struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+	/*
+	 * The VBUS path select flag works differently on AXP288 and newer:
+	 *  - On AXP20x and AXP22x, the flag enables VBUS (ignoring N_VBUSEN).
+	 *  - On AXP288 and AXP8xx, the flag disables VBUS (ignoring N_VBUSEN).
+	 * We only expose the control on variants where it can be used to force
+	 * the VBUS input offline.
+	 */
+	if (psp == POWER_SUPPLY_PROP_ONLINE)
+		return power->axp20x_id == AXP813_ID;
+
+	return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+	       psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+}
+
+static enum power_supply_property axp20x_usb_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_usb_power_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static const struct power_supply_desc axp20x_usb_power_desc = {
+	.name = "axp20x-usb",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = axp20x_usb_power_properties,
+	.num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
+	.property_is_writeable = axp20x_usb_power_prop_writeable,
+	.get_property = axp20x_usb_power_get_property,
+	.set_property = axp20x_usb_power_set_property,
+};
+
+static const struct power_supply_desc axp22x_usb_power_desc = {
+	.name = "axp20x-usb",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = axp22x_usb_power_properties,
+	.num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
+	.property_is_writeable = axp20x_usb_power_prop_writeable,
+	.get_property = axp20x_usb_power_get_property,
+	.set_property = axp20x_usb_power_set_property,
+};
+
+static const char * const axp20x_irq_names[] = {
+	"VBUS_PLUGIN",
+	"VBUS_REMOVAL",
+	"VBUS_VALID",
+	"VBUS_NOT_VALID",
+};
+
+static const char * const axp22x_irq_names[] = {
+	"VBUS_PLUGIN",
+	"VBUS_REMOVAL",
+};
+
+struct axp_data {
+	const struct power_supply_desc	*power_desc;
+	const char * const		*irq_names;
+	unsigned int			num_irq_names;
+	enum axp20x_variants		axp20x_id;
+};
+
+static const struct axp_data axp202_data = {
+	.power_desc	= &axp20x_usb_power_desc,
+	.irq_names	= axp20x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp20x_irq_names),
+	.axp20x_id	= AXP202_ID,
+};
+
+static const struct axp_data axp221_data = {
+	.power_desc	= &axp22x_usb_power_desc,
+	.irq_names	= axp22x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
+	.axp20x_id	= AXP221_ID,
+};
+
+static const struct axp_data axp223_data = {
+	.power_desc	= &axp22x_usb_power_desc,
+	.irq_names	= axp22x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
+	.axp20x_id	= AXP223_ID,
+};
+
+static const struct axp_data axp813_data = {
+	.power_desc	= &axp22x_usb_power_desc,
+	.irq_names	= axp22x_irq_names,
+	.num_irq_names	= ARRAY_SIZE(axp22x_irq_names),
+	.axp20x_id	= AXP813_ID,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int axp20x_usb_power_suspend(struct device *dev)
+{
+	struct axp20x_usb_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	/*
+	 * Allow wake via VBUS_PLUGIN only.
+	 *
+	 * As nested threaded IRQs are not automatically disabled during
+	 * suspend, we must explicitly disable the remainder of the IRQs.
+	 */
+	if (device_may_wakeup(&power->supply->dev))
+		enable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		disable_irq(power->irqs[i++]);
+
+	return 0;
+}
+
+static int axp20x_usb_power_resume(struct device *dev)
+{
+	struct axp20x_usb_power *power = dev_get_drvdata(dev);
+	int i = 0;
+
+	if (device_may_wakeup(&power->supply->dev))
+		disable_irq_wake(power->irqs[i++]);
+	while (i < power->num_irqs)
+		enable_irq(power->irqs[i++]);
+
+	mod_delayed_work(system_power_efficient_wq, &power->vbus_detect, DEBOUNCE_TIME);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(axp20x_usb_power_pm_ops, axp20x_usb_power_suspend,
+						  axp20x_usb_power_resume);
+
+static int configure_iio_channels(struct platform_device *pdev,
+				  struct axp20x_usb_power *power)
+{
+	power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+	if (IS_ERR(power->vbus_v)) {
+		if (PTR_ERR(power->vbus_v) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(power->vbus_v);
+	}
+
+	power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
+	if (IS_ERR(power->vbus_i)) {
+		if (PTR_ERR(power->vbus_i) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(power->vbus_i);
+	}
+
+	return 0;
+}
+
+static int configure_adc_registers(struct axp20x_usb_power *power)
+{
+	/* Enable vbus voltage and current measurement */
+	return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
+				  AXP20X_ADC_EN1_VBUS_CURR |
+				  AXP20X_ADC_EN1_VBUS_VOLT,
+				  AXP20X_ADC_EN1_VBUS_CURR |
+				  AXP20X_ADC_EN1_VBUS_VOLT);
+}
+
+static int axp20x_usb_power_probe(struct platform_device *pdev)
+{
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct axp20x_usb_power *power;
+	const struct axp_data *axp_data;
+	int i, irq, ret;
+
+	if (!of_device_is_available(pdev->dev.of_node))
+		return -ENODEV;
+
+	if (!axp20x) {
+		dev_err(&pdev->dev, "Parent drvdata not set\n");
+		return -EINVAL;
+	}
+
+	axp_data = of_device_get_match_data(&pdev->dev);
+
+	power = devm_kzalloc(&pdev->dev,
+			     struct_size(power, irqs, axp_data->num_irq_names),
+			     GFP_KERNEL);
+	if (!power)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, power);
+
+	power->axp20x_id = axp_data->axp20x_id;
+	power->regmap = axp20x->regmap;
+	power->num_irqs = axp_data->num_irq_names;
+
+	ret = devm_delayed_work_autocancel(&pdev->dev, &power->vbus_detect,
+					   axp20x_usb_power_poll_vbus);
+	if (ret)
+		return ret;
+
+	if (power->axp20x_id == AXP202_ID) {
+		/* Enable vbus valid checking */
+		ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
+					 AXP20X_VBUS_MON_VBUS_VALID,
+					 AXP20X_VBUS_MON_VBUS_VALID);
+		if (ret)
+			return ret;
+
+		if (IS_ENABLED(CONFIG_AXP20X_ADC))
+			ret = configure_iio_channels(pdev, power);
+		else
+			ret = configure_adc_registers(power);
+
+		if (ret)
+			return ret;
+	}
+
+	if (power->axp20x_id == AXP813_ID) {
+		/* Enable USB Battery Charging specification detection */
+		ret = regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+				   AXP813_BC_EN, AXP813_BC_EN);
+		if (ret)
+			return ret;
+	}
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = power;
+
+	power->supply = devm_power_supply_register(&pdev->dev,
+						   axp_data->power_desc,
+						   &psy_cfg);
+	if (IS_ERR(power->supply))
+		return PTR_ERR(power->supply);
+
+	/* Request irqs after registering, as irqs may trigger immediately */
+	for (i = 0; i < axp_data->num_irq_names; i++) {
+		irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
+		if (irq < 0)
+			return irq;
+
+		power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+		ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
+						   axp20x_usb_power_irq, 0,
+						   DRVNAME, power);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
+				axp_data->irq_names[i], ret);
+			return ret;
+		}
+	}
+
+	if (axp20x_usb_vbus_needs_polling(power))
+		queue_delayed_work(system_power_efficient_wq, &power->vbus_detect, 0);
+
+	return 0;
+}
+
+static const struct of_device_id axp20x_usb_power_match[] = {
+	{
+		.compatible = "x-powers,axp202-usb-power-supply",
+		.data = &axp202_data,
+	}, {
+		.compatible = "x-powers,axp221-usb-power-supply",
+		.data = &axp221_data,
+	}, {
+		.compatible = "x-powers,axp223-usb-power-supply",
+		.data = &axp223_data,
+	}, {
+		.compatible = "x-powers,axp813-usb-power-supply",
+		.data = &axp813_data,
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
+
+static struct platform_driver axp20x_usb_power_driver = {
+	.probe = axp20x_usb_power_probe,
+	.driver = {
+		.name		= DRVNAME,
+		.of_match_table	= axp20x_usb_power_match,
+		.pm		= &axp20x_usb_power_pm_ops,
+	},
+};
+
+module_platform_driver(axp20x_usb_power_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
new file mode 100644
index 000000000..15219ed43
--- /dev/null
+++ b/drivers/power/supply/axp288_charger.c
@@ -0,0 +1,974 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * axp288_charger.c - X-power AXP288 PMIC Charger driver
+ *
+ * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Intel Corporation
+ * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/extcon.h>
+#include <linux/dmi.h>
+#include <asm/iosf_mbi.h>
+
+#define PS_STAT_VBUS_TRIGGER		BIT(0)
+#define PS_STAT_BAT_CHRG_DIR		BIT(2)
+#define PS_STAT_VBAT_ABOVE_VHOLD	BIT(3)
+#define PS_STAT_VBUS_VALID		BIT(4)
+#define PS_STAT_VBUS_PRESENT		BIT(5)
+
+#define CHRG_STAT_BAT_SAFE_MODE		BIT(3)
+#define CHRG_STAT_BAT_VALID		BIT(4)
+#define CHRG_STAT_BAT_PRESENT		BIT(5)
+#define CHRG_STAT_CHARGING		BIT(6)
+#define CHRG_STAT_PMIC_OTP		BIT(7)
+
+#define VBUS_ISPOUT_CUR_LIM_MASK	0x03
+#define VBUS_ISPOUT_CUR_LIM_BIT_POS	0
+#define VBUS_ISPOUT_CUR_LIM_900MA	0x0	/* 900mA */
+#define VBUS_ISPOUT_CUR_LIM_1500MA	0x1	/* 1500mA */
+#define VBUS_ISPOUT_CUR_LIM_2000MA	0x2	/* 2000mA */
+#define VBUS_ISPOUT_CUR_NO_LIM		0x3	/* 2500mA */
+#define VBUS_ISPOUT_VHOLD_SET_MASK	0x38
+#define VBUS_ISPOUT_VHOLD_SET_BIT_POS	0x3
+#define VBUS_ISPOUT_VHOLD_SET_OFFSET	4000	/* 4000mV */
+#define VBUS_ISPOUT_VHOLD_SET_LSB_RES	100	/* 100mV */
+#define VBUS_ISPOUT_VHOLD_SET_4400MV	0x4	/* 4400mV */
+#define VBUS_ISPOUT_VBUS_PATH_DIS	BIT(7)
+
+#define CHRG_CCCV_CC_MASK		0xf		/* 4 bits */
+#define CHRG_CCCV_CC_BIT_POS		0
+#define CHRG_CCCV_CC_OFFSET		200		/* 200mA */
+#define CHRG_CCCV_CC_LSB_RES		200		/* 200mA */
+#define CHRG_CCCV_ITERM_20P		BIT(4)		/* 20% of CC */
+#define CHRG_CCCV_CV_MASK		0x60		/* 2 bits */
+#define CHRG_CCCV_CV_BIT_POS		5
+#define CHRG_CCCV_CV_4100MV		0x0		/* 4.10V */
+#define CHRG_CCCV_CV_4150MV		0x1		/* 4.15V */
+#define CHRG_CCCV_CV_4200MV		0x2		/* 4.20V */
+#define CHRG_CCCV_CV_4350MV		0x3		/* 4.35V */
+#define CHRG_CCCV_CHG_EN		BIT(7)
+
+#define CNTL2_CC_TIMEOUT_MASK		0x3	/* 2 bits */
+#define CNTL2_CC_TIMEOUT_OFFSET		6	/* 6 Hrs */
+#define CNTL2_CC_TIMEOUT_LSB_RES	2	/* 2 Hrs */
+#define CNTL2_CC_TIMEOUT_12HRS		0x3	/* 12 Hrs */
+#define CNTL2_CHGLED_TYPEB		BIT(4)
+#define CNTL2_CHG_OUT_TURNON		BIT(5)
+#define CNTL2_PC_TIMEOUT_MASK		0xC0
+#define CNTL2_PC_TIMEOUT_OFFSET		40	/* 40 mins */
+#define CNTL2_PC_TIMEOUT_LSB_RES	10	/* 10 mins */
+#define CNTL2_PC_TIMEOUT_70MINS		0x3
+
+#define CHRG_ILIM_TEMP_LOOP_EN		BIT(3)
+#define CHRG_VBUS_ILIM_MASK		0xf0
+#define CHRG_VBUS_ILIM_BIT_POS		4
+#define CHRG_VBUS_ILIM_100MA		0x0	/* 100mA */
+#define CHRG_VBUS_ILIM_500MA		0x1	/* 500mA */
+#define CHRG_VBUS_ILIM_900MA		0x2	/* 900mA */
+#define CHRG_VBUS_ILIM_1500MA		0x3	/* 1500mA */
+#define CHRG_VBUS_ILIM_2000MA		0x4	/* 2000mA */
+#define CHRG_VBUS_ILIM_2500MA		0x5	/* 2500mA */
+#define CHRG_VBUS_ILIM_3000MA		0x6	/* 3000mA */
+#define CHRG_VBUS_ILIM_3500MA		0x7	/* 3500mA */
+#define CHRG_VBUS_ILIM_4000MA		0x8	/* 4000mA */
+
+#define CHRG_VLTFC_0C			0xA5	/* 0 DegC */
+#define CHRG_VHTFC_45C			0x1F	/* 45 DegC */
+
+#define FG_CNTL_OCV_ADJ_EN		BIT(3)
+
+#define CV_4100MV			4100	/* 4100mV */
+#define CV_4150MV			4150	/* 4150mV */
+#define CV_4200MV			4200	/* 4200mV */
+#define CV_4350MV			4350	/* 4350mV */
+
+#define AXP288_REG_UPDATE_INTERVAL	(60 * HZ)
+
+#define AXP288_EXTCON_DEV_NAME		"axp288_extcon"
+#define USB_HOST_EXTCON_HID		"INT3496"
+#define USB_HOST_EXTCON_NAME		"INT3496:00"
+
+enum {
+	VBUS_OV_IRQ = 0,
+	CHARGE_DONE_IRQ,
+	CHARGE_CHARGING_IRQ,
+	BAT_SAFE_QUIT_IRQ,
+	BAT_SAFE_ENTER_IRQ,
+	QCBTU_IRQ,
+	CBTU_IRQ,
+	QCBTO_IRQ,
+	CBTO_IRQ,
+	CHRG_INTR_END,
+};
+
+struct axp288_chrg_info {
+	struct platform_device *pdev;
+	struct regmap *regmap;
+	struct regmap_irq_chip_data *regmap_irqc;
+	int irq[CHRG_INTR_END];
+	struct power_supply *psy_usb;
+	struct mutex lock;
+
+	/* OTG/Host mode */
+	struct {
+		struct work_struct work;
+		struct extcon_dev *cable;
+		struct notifier_block id_nb;
+		bool id_short;
+	} otg;
+
+	/* SDP/CDP/DCP USB charging cable notifications */
+	struct {
+		struct extcon_dev *edev;
+		struct notifier_block nb;
+		struct work_struct work;
+	} cable;
+
+	int cc;
+	int cv;
+	int max_cc;
+	int max_cv;
+
+	unsigned long last_updated;
+	unsigned int input_status;
+	unsigned int op_mode;
+	unsigned int backend_control;
+	bool valid;
+};
+
+static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
+{
+	u8 reg_val;
+	int ret;
+
+	if (cc < CHRG_CCCV_CC_OFFSET)
+		cc = CHRG_CCCV_CC_OFFSET;
+	else if (cc > info->max_cc)
+		cc = info->max_cc;
+
+	reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
+	cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+	reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
+
+	ret = regmap_update_bits(info->regmap,
+				AXP20X_CHRG_CTRL1,
+				CHRG_CCCV_CC_MASK, reg_val);
+	if (ret >= 0)
+		info->cc = cc;
+
+	return ret;
+}
+
+static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
+{
+	u8 reg_val;
+	int ret;
+
+	if (cv <= CV_4100MV) {
+		reg_val = CHRG_CCCV_CV_4100MV;
+		cv = CV_4100MV;
+	} else if (cv <= CV_4150MV) {
+		reg_val = CHRG_CCCV_CV_4150MV;
+		cv = CV_4150MV;
+	} else if (cv <= CV_4200MV) {
+		reg_val = CHRG_CCCV_CV_4200MV;
+		cv = CV_4200MV;
+	} else {
+		reg_val = CHRG_CCCV_CV_4350MV;
+		cv = CV_4350MV;
+	}
+
+	reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
+
+	ret = regmap_update_bits(info->regmap,
+				AXP20X_CHRG_CTRL1,
+				CHRG_CCCV_CV_MASK, reg_val);
+
+	if (ret >= 0)
+		info->cv = cv;
+
+	return ret;
+}
+
+static int axp288_charger_get_vbus_inlmt(struct axp288_chrg_info *info)
+{
+	unsigned int val;
+
+	val = info->backend_control;
+
+	val >>= CHRG_VBUS_ILIM_BIT_POS;
+	switch (val) {
+	case CHRG_VBUS_ILIM_100MA:
+		return 100000;
+	case CHRG_VBUS_ILIM_500MA:
+		return 500000;
+	case CHRG_VBUS_ILIM_900MA:
+		return 900000;
+	case CHRG_VBUS_ILIM_1500MA:
+		return 1500000;
+	case CHRG_VBUS_ILIM_2000MA:
+		return 2000000;
+	case CHRG_VBUS_ILIM_2500MA:
+		return 2500000;
+	case CHRG_VBUS_ILIM_3000MA:
+		return 3000000;
+	case CHRG_VBUS_ILIM_3500MA:
+		return 3500000;
+	default:
+		/* All b1xxx values map to 4000 mA */
+		return 4000000;
+	}
+}
+
+static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
+					   int inlmt)
+{
+	int ret;
+	u8 reg_val;
+
+	if (inlmt >= 4000000)
+		reg_val = CHRG_VBUS_ILIM_4000MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 3500000)
+		reg_val = CHRG_VBUS_ILIM_3500MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 3000000)
+		reg_val = CHRG_VBUS_ILIM_3000MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 2500000)
+		reg_val = CHRG_VBUS_ILIM_2500MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 2000000)
+		reg_val = CHRG_VBUS_ILIM_2000MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 1500000)
+		reg_val = CHRG_VBUS_ILIM_1500MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 900000)
+		reg_val = CHRG_VBUS_ILIM_900MA << CHRG_VBUS_ILIM_BIT_POS;
+	else if (inlmt >= 500000)
+		reg_val = CHRG_VBUS_ILIM_500MA << CHRG_VBUS_ILIM_BIT_POS;
+	else
+		reg_val = CHRG_VBUS_ILIM_100MA << CHRG_VBUS_ILIM_BIT_POS;
+
+	ret = regmap_update_bits(info->regmap, AXP20X_CHRG_BAK_CTRL,
+				 CHRG_VBUS_ILIM_MASK, reg_val);
+	if (ret < 0)
+		dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
+
+	return ret;
+}
+
+static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
+								bool enable)
+{
+	int ret;
+
+	if (enable)
+		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+					VBUS_ISPOUT_VBUS_PATH_DIS, 0);
+	else
+		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+			VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
+
+	if (ret < 0)
+		dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
+
+	return ret;
+}
+
+static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
+								bool enable)
+{
+	int ret;
+
+	if (enable)
+		ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+				CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
+	else
+		ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+				CHRG_CCCV_CHG_EN, 0);
+	if (ret < 0)
+		dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
+
+	return ret;
+}
+
+static int axp288_get_charger_health(struct axp288_chrg_info *info)
+{
+	if (!(info->input_status & PS_STAT_VBUS_PRESENT))
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+
+	if (!(info->input_status & PS_STAT_VBUS_VALID))
+		return POWER_SUPPLY_HEALTH_DEAD;
+	else if (info->op_mode & CHRG_STAT_PMIC_OTP)
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	else if (info->op_mode & CHRG_STAT_BAT_SAFE_MODE)
+		return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+	else
+		return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int axp288_charger_usb_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+	int ret = 0;
+	int scaled_val;
+
+	mutex_lock(&info->lock);
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		scaled_val = min(val->intval, info->max_cc);
+		scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+		ret = axp288_charger_set_cc(info, scaled_val);
+		if (ret < 0) {
+			dev_warn(&info->pdev->dev, "set charge current failed\n");
+			goto out;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		scaled_val = min(val->intval, info->max_cv);
+		scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+		ret = axp288_charger_set_cv(info, scaled_val);
+		if (ret < 0) {
+			dev_warn(&info->pdev->dev, "set charge voltage failed\n");
+			goto out;
+		}
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = axp288_charger_set_vbus_inlmt(info, val->intval);
+		if (ret < 0) {
+			dev_warn(&info->pdev->dev, "set input current limit failed\n");
+			goto out;
+		}
+		info->valid = false;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int axp288_charger_reg_readb(struct axp288_chrg_info *info, int reg, unsigned int *ret_val)
+{
+	int ret;
+
+	ret = regmap_read(info->regmap, reg, ret_val);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "Error %d on reading value from register 0x%04x\n",
+			ret,
+			reg);
+		return ret;
+	}
+	return 0;
+}
+
+static int axp288_charger_usb_update_property(struct axp288_chrg_info *info)
+{
+	int ret = 0;
+
+	if (info->valid && time_before(jiffies, info->last_updated + AXP288_REG_UPDATE_INTERVAL))
+		return 0;
+
+	dev_dbg(&info->pdev->dev, "Charger updating register values...\n");
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret < 0)
+		return ret;
+
+	ret = axp288_charger_reg_readb(info, AXP20X_PWR_INPUT_STATUS, &info->input_status);
+	if (ret < 0)
+		goto out;
+
+	ret = axp288_charger_reg_readb(info, AXP20X_PWR_OP_MODE, &info->op_mode);
+	if (ret < 0)
+		goto out;
+
+	ret = axp288_charger_reg_readb(info, AXP20X_CHRG_BAK_CTRL, &info->backend_control);
+	if (ret < 0)
+		goto out;
+
+	info->last_updated = jiffies;
+	info->valid = true;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
+	return ret;
+}
+
+static int axp288_charger_usb_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = axp288_charger_usb_update_property(info);
+	if (ret < 0)
+		goto out;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		/* Check for OTG case first */
+		if (info->otg.id_short) {
+			val->intval = 0;
+			break;
+		}
+		val->intval = (info->input_status & PS_STAT_VBUS_PRESENT) ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		/* Check for OTG case first */
+		if (info->otg.id_short) {
+			val->intval = 0;
+			break;
+		}
+		val->intval = (info->input_status & PS_STAT_VBUS_VALID) ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = axp288_get_charger_health(info);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		val->intval = info->cc * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = info->max_cc * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = info->cv * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = info->max_cv * 1000;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		val->intval = axp288_charger_get_vbus_inlmt(info);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int axp288_charger_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property axp288_usb_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc axp288_charger_desc = {
+	.name			= "axp288_charger",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= axp288_usb_props,
+	.num_properties		= ARRAY_SIZE(axp288_usb_props),
+	.get_property		= axp288_charger_usb_get_property,
+	.set_property		= axp288_charger_usb_set_property,
+	.property_is_writeable	= axp288_charger_property_is_writeable,
+};
+
+static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
+{
+	struct axp288_chrg_info *info = dev;
+	int i;
+
+	for (i = 0; i < CHRG_INTR_END; i++) {
+		if (info->irq[i] == irq)
+			break;
+	}
+
+	if (i >= CHRG_INTR_END) {
+		dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
+		return IRQ_NONE;
+	}
+
+	switch (i) {
+	case VBUS_OV_IRQ:
+		dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
+		break;
+	case CHARGE_DONE_IRQ:
+		dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
+		break;
+	case CHARGE_CHARGING_IRQ:
+		dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
+		break;
+	case BAT_SAFE_QUIT_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Quit Safe Mode(restart timer) Charging IRQ\n");
+		break;
+	case BAT_SAFE_ENTER_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Enter Safe Mode(timer expire) Charging IRQ\n");
+		break;
+	case QCBTU_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Quit Battery Under Temperature(CHRG) INTR\n");
+		break;
+	case CBTU_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Hit Battery Under Temperature(CHRG) INTR\n");
+		break;
+	case QCBTO_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Quit Battery Over Temperature(CHRG) INTR\n");
+		break;
+	case CBTO_IRQ:
+		dev_dbg(&info->pdev->dev,
+			"Hit Battery Over Temperature(CHRG) INTR\n");
+		break;
+	default:
+		dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
+		goto out;
+	}
+	mutex_lock(&info->lock);
+	info->valid = false;
+	mutex_unlock(&info->lock);
+	power_supply_changed(info->psy_usb);
+out:
+	return IRQ_HANDLED;
+}
+
+/*
+ * The HP Pavilion x2 10 series comes in a number of variants:
+ * Bay Trail SoC    + AXP288 PMIC, Micro-USB, DMI_BOARD_NAME: "8021"
+ * Bay Trail SoC    + AXP288 PMIC, Type-C,    DMI_BOARD_NAME: "815D"
+ * Cherry Trail SoC + AXP288 PMIC, Type-C,    DMI_BOARD_NAME: "813E"
+ * Cherry Trail SoC + TI PMIC,     Type-C,    DMI_BOARD_NAME: "827C" or "82F4"
+ *
+ * The variants with the AXP288 + Type-C connector are all kinds of special:
+ *
+ * 1. They use a Type-C connector which the AXP288 does not support, so when
+ * using a Type-C charger it is not recognized. Unlike most AXP288 devices,
+ * this model actually has mostly working ACPI AC / Battery code, the ACPI code
+ * "solves" this by simply setting the input_current_limit to 3A.
+ * There are still some issues with the ACPI code, so we use this native driver,
+ * and to solve the charging not working (500mA is not enough) issue we hardcode
+ * the 3A input_current_limit like the ACPI code does.
+ *
+ * 2. If no charger is connected the machine boots with the vbus-path disabled.
+ * Normally this is done when a 5V boost converter is active to avoid the PMIC
+ * trying to charge from the 5V boost converter's output. This is done when
+ * an OTG host cable is inserted and the ID pin on the micro-B receptacle is
+ * pulled low and the ID pin has an ACPI event handler associated with it
+ * which re-enables the vbus-path when the ID pin is pulled high when the
+ * OTG host cable is removed. The Type-C connector has no ID pin, there is
+ * no ID pin handler and there appears to be no 5V boost converter, so we
+ * end up not charging because the vbus-path is disabled, until we unplug
+ * the charger which automatically clears the vbus-path disable bit and then
+ * on the second plug-in of the adapter we start charging. To solve the not
+ * charging on first charger plugin we unconditionally enable the vbus-path at
+ * probe on this model, which is safe since there is no 5V boost converter.
+ */
+static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "815D"),
+		},
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "813E"),
+		},
+	},
+	{} /* Terminating entry */
+};
+
+static void axp288_charger_extcon_evt_worker(struct work_struct *work)
+{
+	struct axp288_chrg_info *info =
+	    container_of(work, struct axp288_chrg_info, cable.work);
+	int ret, current_limit;
+	struct extcon_dev *edev = info->cable.edev;
+	unsigned int val;
+
+	ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "Error reading status (%d)\n", ret);
+		return;
+	}
+
+	/* Offline? Disable charging and bail */
+	if (!(val & PS_STAT_VBUS_VALID)) {
+		dev_dbg(&info->pdev->dev, "USB charger disconnected\n");
+		axp288_charger_enable_charger(info, false);
+		mutex_lock(&info->lock);
+		info->valid = false;
+		mutex_unlock(&info->lock);
+		power_supply_changed(info->psy_usb);
+		return;
+	}
+
+	/* Determine cable/charger type */
+	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+		/* See comment above axp288_hp_x2_dmi_ids declaration */
+		dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
+		current_limit = 3000000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
+		dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
+		current_limit = 500000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
+		dev_dbg(&info->pdev->dev, "USB CDP charger is connected\n");
+		current_limit = 1500000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
+		dev_dbg(&info->pdev->dev, "USB DCP charger is connected\n");
+		current_limit = 2000000;
+	} else {
+		/* Charger type detection still in progress, bail. */
+		return;
+	}
+
+	/* Set vbus current limit first, then enable charger */
+	ret = axp288_charger_set_vbus_inlmt(info, current_limit);
+	if (ret == 0)
+		axp288_charger_enable_charger(info, true);
+	else
+		dev_err(&info->pdev->dev,
+			"error setting current limit (%d)\n", ret);
+
+	mutex_lock(&info->lock);
+	info->valid = false;
+	mutex_unlock(&info->lock);
+	power_supply_changed(info->psy_usb);
+}
+
+static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
+					   unsigned long event, void *param)
+{
+	struct axp288_chrg_info *info =
+		container_of(nb, struct axp288_chrg_info, cable.nb);
+	schedule_work(&info->cable.work);
+	return NOTIFY_OK;
+}
+
+static void axp288_charger_otg_evt_worker(struct work_struct *work)
+{
+	struct axp288_chrg_info *info =
+	    container_of(work, struct axp288_chrg_info, otg.work);
+	struct extcon_dev *edev = info->otg.cable;
+	int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);
+
+	dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
+				usb_host ? "attached" : "detached");
+
+	/*
+	 * Set usb_id_short flag to avoid running charger detection logic
+	 * in case usb host.
+	 */
+	info->otg.id_short = usb_host;
+
+	/* Disable VBUS path before enabling the 5V boost */
+	ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
+	if (ret < 0)
+		dev_warn(&info->pdev->dev, "vbus path disable failed\n");
+}
+
+static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
+				   unsigned long event, void *param)
+{
+	struct axp288_chrg_info *info =
+	    container_of(nb, struct axp288_chrg_info, otg.id_nb);
+
+	schedule_work(&info->otg.work);
+
+	return NOTIFY_OK;
+}
+
+static int charger_init_hw_regs(struct axp288_chrg_info *info)
+{
+	int ret, cc, cv;
+	unsigned int val;
+
+	/* Program temperature thresholds */
+	ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+							AXP20X_V_LTF_CHRG, ret);
+		return ret;
+	}
+
+	ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+							AXP20X_V_HTF_CHRG, ret);
+		return ret;
+	}
+
+	/* Do not turn-off charger o/p after charge cycle ends */
+	ret = regmap_update_bits(info->regmap,
+				AXP20X_CHRG_CTRL2,
+				CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+						AXP20X_CHRG_CTRL2, ret);
+		return ret;
+	}
+
+	/* Setup ending condition for charging to be 10% of I(chrg) */
+	ret = regmap_update_bits(info->regmap,
+				AXP20X_CHRG_CTRL1,
+				CHRG_CCCV_ITERM_20P, 0);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+						AXP20X_CHRG_CTRL1, ret);
+		return ret;
+	}
+
+	/* Disable OCV-SOC curve calibration */
+	ret = regmap_update_bits(info->regmap,
+				AXP20X_CC_CTRL,
+				FG_CNTL_OCV_ADJ_EN, 0);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+						AXP20X_CC_CTRL, ret);
+		return ret;
+	}
+
+	if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+		/* See comment above axp288_hp_x2_dmi_ids declaration */
+		ret = axp288_charger_vbus_path_select(info, true);
+		if (ret < 0)
+			return ret;
+	} else {
+		/* Set Vhold to the factory default / recommended 4.4V */
+		val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS;
+		ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+					 VBUS_ISPOUT_VHOLD_SET_MASK, val);
+		if (ret < 0) {
+			dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+				AXP20X_VBUS_IPSOUT_MGMT, ret);
+			return ret;
+		}
+	}
+
+	/* Read current charge voltage and current limit */
+	ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
+	if (ret < 0) {
+		dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
+			AXP20X_CHRG_CTRL1, ret);
+		return ret;
+	}
+
+	/* Determine charge voltage */
+	cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
+	switch (cv) {
+	case CHRG_CCCV_CV_4100MV:
+		info->cv = CV_4100MV;
+		break;
+	case CHRG_CCCV_CV_4150MV:
+		info->cv = CV_4150MV;
+		break;
+	case CHRG_CCCV_CV_4200MV:
+		info->cv = CV_4200MV;
+		break;
+	case CHRG_CCCV_CV_4350MV:
+		info->cv = CV_4350MV;
+		break;
+	}
+
+	/* Determine charge current limit */
+	cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+	cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+	info->cc = cc;
+
+	/*
+	 * Do not allow the user to configure higher settings then those
+	 * set by the firmware
+	 */
+	info->max_cv = info->cv;
+	info->max_cc = info->cc;
+
+	return 0;
+}
+
+static void axp288_charger_cancel_work(void *data)
+{
+	struct axp288_chrg_info *info = data;
+
+	cancel_work_sync(&info->otg.work);
+	cancel_work_sync(&info->cable.work);
+}
+
+static int axp288_charger_probe(struct platform_device *pdev)
+{
+	int ret, i, pirq;
+	struct axp288_chrg_info *info;
+	struct device *dev = &pdev->dev;
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config charger_cfg = {};
+	unsigned int val;
+
+	/*
+	 * Normally the native AXP288 fg/charger drivers are preferred but
+	 * on some devices the ACPI drivers should be used instead.
+	 */
+	if (!acpi_quirk_skip_acpi_ac_and_battery())
+		return -ENODEV;
+
+	/*
+	 * On some devices the fuelgauge and charger parts of the axp288 are
+	 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
+	 */
+	ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
+	if (ret < 0)
+		return ret;
+	if (val == 0)
+		return -ENODEV;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->lock);
+	info->pdev = pdev;
+	info->regmap = axp20x->regmap;
+	info->regmap_irqc = axp20x->regmap_irqc;
+
+	info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
+	if (IS_ERR(info->cable.edev)) {
+		dev_err_probe(dev, PTR_ERR(info->cable.edev),
+			      "extcon_get_extcon_dev(%s) failed\n",
+			      AXP288_EXTCON_DEV_NAME);
+		return PTR_ERR(info->cable.edev);
+	}
+
+	if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1)) {
+		info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_NAME);
+		if (IS_ERR(info->otg.cable)) {
+			dev_err_probe(dev, PTR_ERR(info->otg.cable),
+				      "extcon_get_extcon_dev(%s) failed\n",
+				      USB_HOST_EXTCON_NAME);
+			return PTR_ERR(info->otg.cable);
+		}
+		dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
+	}
+
+	platform_set_drvdata(pdev, info);
+
+	ret = charger_init_hw_regs(info);
+	if (ret)
+		return ret;
+
+	/* Register with power supply class */
+	charger_cfg.drv_data = info;
+	info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
+						   &charger_cfg);
+	if (IS_ERR(info->psy_usb)) {
+		ret = PTR_ERR(info->psy_usb);
+		dev_err(dev, "failed to register power supply: %d\n", ret);
+		return ret;
+	}
+
+	/* Cancel our work on cleanup, register this before the notifiers */
+	ret = devm_add_action(dev, axp288_charger_cancel_work, info);
+	if (ret)
+		return ret;
+
+	/* Register for extcon notification */
+	INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
+	info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
+	ret = devm_extcon_register_notifier_all(dev, info->cable.edev,
+						&info->cable.nb);
+	if (ret) {
+		dev_err(dev, "failed to register cable extcon notifier\n");
+		return ret;
+	}
+	schedule_work(&info->cable.work);
+
+	/* Register for OTG notification */
+	INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
+	info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
+	if (info->otg.cable) {
+		ret = devm_extcon_register_notifier(dev, info->otg.cable,
+					EXTCON_USB_HOST, &info->otg.id_nb);
+		if (ret) {
+			dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
+			return ret;
+		}
+		schedule_work(&info->otg.work);
+	}
+
+	/* Register charger interrupts */
+	for (i = 0; i < CHRG_INTR_END; i++) {
+		pirq = platform_get_irq(info->pdev, i);
+		if (pirq < 0)
+			return pirq;
+
+		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
+		if (info->irq[i] < 0) {
+			dev_warn(&info->pdev->dev,
+				"failed to get virtual interrupt=%d\n", pirq);
+			return info->irq[i];
+		}
+		ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
+					NULL, axp288_charger_irq_thread_handler,
+					IRQF_ONESHOT, info->pdev->name, info);
+		if (ret) {
+			dev_err(dev, "failed to request interrupt=%d\n",
+								info->irq[i]);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id axp288_charger_id_table[] = {
+	{ .name = "axp288_charger" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);
+
+static struct platform_driver axp288_charger_driver = {
+	.probe = axp288_charger_probe,
+	.id_table = axp288_charger_id_table,
+	.driver = {
+		.name = "axp288_charger",
+	},
+};
+
+module_platform_driver(axp288_charger_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
new file mode 100644
index 000000000..3be6f3b10
--- /dev/null
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * axp288_fuel_gauge.c - Xpower AXP288 PMIC Fuel Gauge Driver
+ *
+ * Copyright (C) 2020-2021 Andrejus Basovas <xxx@yyy.tld>
+ * Copyright (C) 2016-2021 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/iio/consumer.h>
+#include <asm/unaligned.h>
+#include <asm/iosf_mbi.h>
+
+#define PS_STAT_VBUS_TRIGGER			(1 << 0)
+#define PS_STAT_BAT_CHRG_DIR			(1 << 2)
+#define PS_STAT_VBAT_ABOVE_VHOLD		(1 << 3)
+#define PS_STAT_VBUS_VALID			(1 << 4)
+#define PS_STAT_VBUS_PRESENT			(1 << 5)
+
+#define CHRG_STAT_BAT_SAFE_MODE			(1 << 3)
+#define CHRG_STAT_BAT_VALID			(1 << 4)
+#define CHRG_STAT_BAT_PRESENT			(1 << 5)
+#define CHRG_STAT_CHARGING			(1 << 6)
+#define CHRG_STAT_PMIC_OTP			(1 << 7)
+
+#define CHRG_CCCV_CC_MASK			0xf     /* 4 bits */
+#define CHRG_CCCV_CC_BIT_POS			0
+#define CHRG_CCCV_CC_OFFSET			200     /* 200mA */
+#define CHRG_CCCV_CC_LSB_RES			200     /* 200mA */
+#define CHRG_CCCV_ITERM_20P			(1 << 4)    /* 20% of CC */
+#define CHRG_CCCV_CV_MASK			0x60        /* 2 bits */
+#define CHRG_CCCV_CV_BIT_POS			5
+#define CHRG_CCCV_CV_4100MV			0x0     /* 4.10V */
+#define CHRG_CCCV_CV_4150MV			0x1     /* 4.15V */
+#define CHRG_CCCV_CV_4200MV			0x2     /* 4.20V */
+#define CHRG_CCCV_CV_4350MV			0x3     /* 4.35V */
+#define CHRG_CCCV_CHG_EN			(1 << 7)
+
+#define FG_CNTL_OCV_ADJ_STAT			(1 << 2)
+#define FG_CNTL_OCV_ADJ_EN			(1 << 3)
+#define FG_CNTL_CAP_ADJ_STAT			(1 << 4)
+#define FG_CNTL_CAP_ADJ_EN			(1 << 5)
+#define FG_CNTL_CC_EN				(1 << 6)
+#define FG_CNTL_GAUGE_EN			(1 << 7)
+
+#define FG_15BIT_WORD_VALID			(1 << 15)
+#define FG_15BIT_VAL_MASK			0x7fff
+
+#define FG_REP_CAP_VALID			(1 << 7)
+#define FG_REP_CAP_VAL_MASK			0x7F
+
+#define FG_DES_CAP1_VALID			(1 << 7)
+#define FG_DES_CAP_RES_LSB			1456    /* 1.456mAhr */
+
+#define FG_DES_CC_RES_LSB			1456    /* 1.456mAhr */
+
+#define FG_OCV_CAP_VALID			(1 << 7)
+#define FG_OCV_CAP_VAL_MASK			0x7F
+#define FG_CC_CAP_VALID				(1 << 7)
+#define FG_CC_CAP_VAL_MASK			0x7F
+
+#define FG_LOW_CAP_THR1_MASK			0xf0    /* 5% tp 20% */
+#define FG_LOW_CAP_THR1_VAL			0xa0    /* 15 perc */
+#define FG_LOW_CAP_THR2_MASK			0x0f    /* 0% to 15% */
+#define FG_LOW_CAP_WARN_THR			14  /* 14 perc */
+#define FG_LOW_CAP_CRIT_THR			4   /* 4 perc */
+#define FG_LOW_CAP_SHDN_THR			0   /* 0 perc */
+
+#define DEV_NAME				"axp288_fuel_gauge"
+
+/* 1.1mV per LSB expressed in uV */
+#define VOLTAGE_FROM_ADC(a)			((a * 11) / 10)
+/* properties converted to uV, uA */
+#define PROP_VOLT(a)				((a) * 1000)
+#define PROP_CURR(a)				((a) * 1000)
+
+#define AXP288_REG_UPDATE_INTERVAL		(60 * HZ)
+#define AXP288_FG_INTR_NUM			6
+
+#define AXP288_QUIRK_NO_BATTERY			BIT(0)
+
+static bool no_current_sense_res;
+module_param(no_current_sense_res, bool, 0444);
+MODULE_PARM_DESC(no_current_sense_res, "No (or broken) current sense resistor");
+
+enum {
+	QWBTU_IRQ = 0,
+	WBTU_IRQ,
+	QWBTO_IRQ,
+	WBTO_IRQ,
+	WL2_IRQ,
+	WL1_IRQ,
+};
+
+enum {
+	BAT_CHRG_CURR,
+	BAT_D_CURR,
+	BAT_VOLT,
+	IIO_CHANNEL_NUM
+};
+
+struct axp288_fg_info {
+	struct device *dev;
+	struct regmap *regmap;
+	int irq[AXP288_FG_INTR_NUM];
+	struct iio_channel *iio_channel[IIO_CHANNEL_NUM];
+	struct power_supply *bat;
+	struct mutex lock;
+	int status;
+	int max_volt;
+	int pwr_op;
+	int low_cap;
+	struct dentry *debug_file;
+
+	char valid;                 /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	int pwr_stat;
+	int fg_res;
+	int bat_volt;
+	int d_curr;
+	int c_curr;
+	int ocv;
+	int fg_cc_mtr1;
+	int fg_des_cap1;
+};
+
+static enum power_supply_property fuel_gauge_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	/* The 3 props below are not used when no_current_sense_res is set */
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(info->regmap, reg, &val);
+	if (ret < 0) {
+		dev_err(info->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
+		return ret;
+	}
+
+	return val;
+}
+
+static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val)
+{
+	int ret;
+
+	ret = regmap_write(info->regmap, reg, (unsigned int)val);
+
+	if (ret < 0)
+		dev_err(info->dev, "Error writing reg 0x%02x err: %d\n", reg, ret);
+
+	return ret;
+}
+
+static int fuel_gauge_read_15bit_word(struct axp288_fg_info *info, int reg)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+	if (ret < 0) {
+		dev_err(info->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
+		return ret;
+	}
+
+	ret = get_unaligned_be16(buf);
+	if (!(ret & FG_15BIT_WORD_VALID)) {
+		dev_err(info->dev, "Error reg 0x%02x contents not valid\n", reg);
+		return -ENXIO;
+	}
+
+	return ret & FG_15BIT_VAL_MASK;
+}
+
+static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+	if (ret < 0) {
+		dev_err(info->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
+		return ret;
+	}
+
+	/* 12-bit data values have upper 8 bits in buf[0], lower 4 in buf[1] */
+	return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f);
+}
+
+static int fuel_gauge_update_registers(struct axp288_fg_info *info)
+{
+	int ret;
+
+	if (info->valid && time_before(jiffies, info->last_updated + AXP288_REG_UPDATE_INTERVAL))
+		return 0;
+
+	dev_dbg(info->dev, "Fuel Gauge updating register values...\n");
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret < 0)
+		return ret;
+
+	ret = fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS);
+	if (ret < 0)
+		goto out;
+	info->pwr_stat = ret;
+
+	if (no_current_sense_res)
+		ret = fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG);
+	else
+		ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
+	if (ret < 0)
+		goto out;
+	info->fg_res = ret;
+
+	ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &info->bat_volt);
+	if (ret < 0)
+		goto out;
+
+	ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG);
+	if (ret < 0)
+		goto out;
+	info->ocv = ret;
+
+	if (no_current_sense_res)
+		goto out_no_current_sense_res;
+
+	if (info->pwr_stat & PS_STAT_BAT_CHRG_DIR) {
+		info->d_curr = 0;
+		ret = iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], &info->c_curr);
+		if (ret < 0)
+			goto out;
+	} else {
+		info->c_curr = 0;
+		ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &info->d_curr);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG);
+	if (ret < 0)
+		goto out;
+	info->fg_cc_mtr1 = ret;
+
+	ret = fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG);
+	if (ret < 0)
+		goto out;
+	info->fg_des_cap1 = ret;
+
+out_no_current_sense_res:
+	info->last_updated = jiffies;
+	info->valid = 1;
+	ret = 0;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
+	return ret;
+}
+
+static void fuel_gauge_get_status(struct axp288_fg_info *info)
+{
+	int pwr_stat = info->pwr_stat;
+	int fg_res = info->fg_res;
+	int curr = info->d_curr;
+
+	/* Report full if Vbus is valid and the reported capacity is 100% */
+	if (!(pwr_stat & PS_STAT_VBUS_VALID))
+		goto not_full;
+
+	if (!(fg_res & FG_REP_CAP_VALID))
+		goto not_full;
+
+	fg_res &= ~FG_REP_CAP_VALID;
+	if (fg_res == 100) {
+		info->status = POWER_SUPPLY_STATUS_FULL;
+		return;
+	}
+
+	/*
+	 * Sometimes the charger turns itself off before fg-res reaches 100%.
+	 * When this happens the AXP288 reports a not-charging status and
+	 * 0 mA discharge current.
+	 */
+	if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR) || no_current_sense_res)
+		goto not_full;
+
+	if (curr == 0) {
+		info->status = POWER_SUPPLY_STATUS_FULL;
+		return;
+	}
+
+not_full:
+	if (pwr_stat & PS_STAT_BAT_CHRG_DIR)
+		info->status = POWER_SUPPLY_STATUS_CHARGING;
+	else
+		info->status = POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int fuel_gauge_battery_health(struct axp288_fg_info *info)
+{
+	int vocv = VOLTAGE_FROM_ADC(info->ocv);
+	int health = POWER_SUPPLY_HEALTH_UNKNOWN;
+
+	if (vocv > info->max_volt)
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else
+		health = POWER_SUPPLY_HEALTH_GOOD;
+
+	return health;
+}
+
+static int fuel_gauge_get_property(struct power_supply *ps,
+		enum power_supply_property prop,
+		union power_supply_propval *val)
+{
+	struct axp288_fg_info *info = power_supply_get_drvdata(ps);
+	int ret, value;
+
+	mutex_lock(&info->lock);
+
+	ret = fuel_gauge_update_registers(info);
+	if (ret < 0)
+		goto out;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		fuel_gauge_get_status(info);
+		val->intval = info->status;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = fuel_gauge_battery_health(info);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		value = VOLTAGE_FROM_ADC(info->bat_volt);
+		val->intval = PROP_VOLT(value);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		value = VOLTAGE_FROM_ADC(info->ocv);
+		val->intval = PROP_VOLT(value);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (info->d_curr > 0)
+			value = -1 * info->d_curr;
+		else
+			value = info->c_curr;
+
+		val->intval = PROP_CURR(value);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (info->pwr_op & CHRG_STAT_BAT_PRESENT)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (!(info->fg_res & FG_REP_CAP_VALID))
+			dev_err(info->dev, "capacity measurement not valid\n");
+		val->intval = (info->fg_res & FG_REP_CAP_VAL_MASK);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		val->intval = (info->low_cap & 0x0f);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = info->fg_cc_mtr1 * FG_DES_CAP_RES_LSB;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = info->fg_des_cap1 * FG_DES_CAP_RES_LSB;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = PROP_VOLT(info->max_volt);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int fuel_gauge_set_property(struct power_supply *ps,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct axp288_fg_info *info = power_supply_get_drvdata(ps);
+	int new_low_cap, ret = 0;
+
+	mutex_lock(&info->lock);
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		if ((val->intval < 0) || (val->intval > 15)) {
+			ret = -EINVAL;
+			break;
+		}
+		new_low_cap = info->low_cap;
+		new_low_cap &= 0xf0;
+		new_low_cap |= (val->intval & 0xf);
+		ret = fuel_gauge_reg_writeb(info, AXP288_FG_LOW_CAP_REG, new_low_cap);
+		if (ret == 0)
+			info->low_cap = new_low_cap;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int fuel_gauge_property_is_writeable(struct power_supply *psy,
+	enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static irqreturn_t fuel_gauge_thread_handler(int irq, void *dev)
+{
+	struct axp288_fg_info *info = dev;
+	int i;
+
+	for (i = 0; i < AXP288_FG_INTR_NUM; i++) {
+		if (info->irq[i] == irq)
+			break;
+	}
+
+	if (i >= AXP288_FG_INTR_NUM) {
+		dev_warn(info->dev, "spurious interrupt!!\n");
+		return IRQ_NONE;
+	}
+
+	switch (i) {
+	case QWBTU_IRQ:
+		dev_info(info->dev, "Quit Battery under temperature in work mode IRQ (QWBTU)\n");
+		break;
+	case WBTU_IRQ:
+		dev_info(info->dev, "Battery under temperature in work mode IRQ (WBTU)\n");
+		break;
+	case QWBTO_IRQ:
+		dev_info(info->dev, "Quit Battery over temperature in work mode IRQ (QWBTO)\n");
+		break;
+	case WBTO_IRQ:
+		dev_info(info->dev, "Battery over temperature in work mode IRQ (WBTO)\n");
+		break;
+	case WL2_IRQ:
+		dev_info(info->dev, "Low Batt Warning(2) INTR\n");
+		break;
+	case WL1_IRQ:
+		dev_info(info->dev, "Low Batt Warning(1) INTR\n");
+		break;
+	default:
+		dev_warn(info->dev, "Spurious Interrupt!!!\n");
+	}
+
+	mutex_lock(&info->lock);
+	info->valid = 0; /* Force updating of the cached registers */
+	mutex_unlock(&info->lock);
+
+	power_supply_changed(info->bat);
+	return IRQ_HANDLED;
+}
+
+static void fuel_gauge_external_power_changed(struct power_supply *psy)
+{
+	struct axp288_fg_info *info = power_supply_get_drvdata(psy);
+
+	mutex_lock(&info->lock);
+	info->valid = 0; /* Force updating of the cached registers */
+	mutex_unlock(&info->lock);
+	power_supply_changed(psy);
+}
+
+static struct power_supply_desc fuel_gauge_desc = {
+	.name			= DEV_NAME,
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= fuel_gauge_props,
+	.num_properties		= ARRAY_SIZE(fuel_gauge_props),
+	.get_property		= fuel_gauge_get_property,
+	.set_property		= fuel_gauge_set_property,
+	.property_is_writeable	= fuel_gauge_property_is_writeable,
+	.external_power_changed	= fuel_gauge_external_power_changed,
+};
+
+/*
+ * Some devices have no battery (HDMI sticks) and the axp288 battery's
+ * detection reports one despite it not being there.
+ * Please keep this listed sorted alphabetically.
+ */
+static const struct dmi_system_id axp288_quirks[] = {
+	{
+		/* ACEPC T8 Cherry Trail Z8350 mini PC */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"),
+			/* also match on somewhat unique bios-version */
+			DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/* ACEPC T11 Cherry Trail Z8350 mini PC */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T11"),
+			/* also match on somewhat unique bios-version */
+			DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/* Intel Cherry Trail Compute Stick, Windows version */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/* Intel Cherry Trail Compute Stick, version without an OS */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/* Meegopad T02 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{	/* Mele PCG03 Mini PC */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Mini PC"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Mini PC"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/* Minix Neo Z83-4 mini PC */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{
+		/*
+		 * One Mix 1, this uses the "T3 MRD" boardname used by
+		 * generic mini PCs, but it is a mini laptop so it does
+		 * actually have a battery!
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_MATCH(DMI_BIOS_DATE, "06/14/2018"),
+		},
+		.driver_data = NULL,
+	},
+	{
+		/*
+		 * Various Ace PC/Meegopad/MinisForum/Wintel Mini-PCs/HDMI-sticks
+		 * This entry must be last because it is generic, this allows
+		 * adding more specifuc quirks overriding this generic entry.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "3"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+		},
+		.driver_data = (void *)AXP288_QUIRK_NO_BATTERY,
+	},
+	{}
+};
+
+static int axp288_fuel_gauge_read_initial_regs(struct axp288_fg_info *info)
+{
+	unsigned int val;
+	int ret;
+
+	/*
+	 * On some devices the fuelgauge and charger parts of the axp288 are
+	 * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
+	 */
+	ret = regmap_read(info->regmap, AXP20X_CC_CTRL, &val);
+	if (ret < 0)
+		return ret;
+	if (val == 0)
+		return -ENODEV;
+
+	ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & FG_DES_CAP1_VALID)) {
+		dev_err(info->dev, "axp288 not configured by firmware\n");
+		return -ENODEV;
+	}
+
+	ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
+	if (ret < 0)
+		return ret;
+	switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) {
+	case CHRG_CCCV_CV_4100MV:
+		info->max_volt = 4100;
+		break;
+	case CHRG_CCCV_CV_4150MV:
+		info->max_volt = 4150;
+		break;
+	case CHRG_CCCV_CV_4200MV:
+		info->max_volt = 4200;
+		break;
+	case CHRG_CCCV_CV_4350MV:
+		info->max_volt = 4350;
+		break;
+	}
+
+	ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE);
+	if (ret < 0)
+		return ret;
+	info->pwr_op = ret;
+
+	ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG);
+	if (ret < 0)
+		return ret;
+	info->low_cap = ret;
+
+	return 0;
+}
+
+static void axp288_fuel_gauge_release_iio_chans(void *data)
+{
+	struct axp288_fg_info *info = data;
+	int i;
+
+	for (i = 0; i < IIO_CHANNEL_NUM; i++)
+		if (!IS_ERR_OR_NULL(info->iio_channel[i]))
+			iio_channel_release(info->iio_channel[i]);
+}
+
+static int axp288_fuel_gauge_probe(struct platform_device *pdev)
+{
+	struct axp288_fg_info *info;
+	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	static const char * const iio_chan_name[] = {
+		[BAT_CHRG_CURR] = "axp288-chrg-curr",
+		[BAT_D_CURR] = "axp288-chrg-d-curr",
+		[BAT_VOLT] = "axp288-batt-volt",
+	};
+	const struct dmi_system_id *dmi_id;
+	struct device *dev = &pdev->dev;
+	unsigned long quirks = 0;
+	int i, pirq, ret;
+
+	/*
+	 * Normally the native AXP288 fg/charger drivers are preferred but
+	 * on some devices the ACPI drivers should be used instead.
+	 */
+	if (!acpi_quirk_skip_acpi_ac_and_battery())
+		return -ENODEV;
+
+	dmi_id = dmi_first_match(axp288_quirks);
+	if (dmi_id)
+		quirks = (unsigned long)dmi_id->driver_data;
+
+	if (quirks & AXP288_QUIRK_NO_BATTERY)
+		return -ENODEV;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->dev = dev;
+	info->regmap = axp20x->regmap;
+	info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	info->valid = 0;
+
+	platform_set_drvdata(pdev, info);
+
+	mutex_init(&info->lock);
+
+	for (i = 0; i < AXP288_FG_INTR_NUM; i++) {
+		pirq = platform_get_irq(pdev, i);
+		if (pirq < 0)
+			continue;
+		ret = regmap_irq_get_virq(axp20x->regmap_irqc, pirq);
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "getting vIRQ %d\n", pirq);
+
+		info->irq[i] = ret;
+	}
+
+	for (i = 0; i < IIO_CHANNEL_NUM; i++) {
+		/*
+		 * Note cannot use devm_iio_channel_get because x86 systems
+		 * lack the device<->channel maps which iio_channel_get will
+		 * try to use when passed a non NULL device pointer.
+		 */
+		info->iio_channel[i] =
+			iio_channel_get(NULL, iio_chan_name[i]);
+		if (IS_ERR(info->iio_channel[i])) {
+			ret = PTR_ERR(info->iio_channel[i]);
+			dev_dbg(dev, "error getting iiochan %s: %d\n", iio_chan_name[i], ret);
+			/* Wait for axp288_adc to load */
+			if (ret == -ENODEV)
+				ret = -EPROBE_DEFER;
+
+			axp288_fuel_gauge_release_iio_chans(info);
+			return ret;
+		}
+	}
+
+	ret = devm_add_action_or_reset(dev, axp288_fuel_gauge_release_iio_chans, info);
+	if (ret)
+		return ret;
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret < 0)
+		return ret;
+
+	ret = axp288_fuel_gauge_read_initial_regs(info);
+	iosf_mbi_unblock_punit_i2c_access();
+	if (ret < 0)
+		return ret;
+
+	psy_cfg.drv_data = info;
+	if (no_current_sense_res)
+		fuel_gauge_desc.num_properties = ARRAY_SIZE(fuel_gauge_props) - 3;
+	info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg);
+	if (IS_ERR(info->bat)) {
+		ret = PTR_ERR(info->bat);
+		dev_err(dev, "failed to register battery: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < AXP288_FG_INTR_NUM; i++) {
+		ret = devm_request_threaded_irq(dev, info->irq[i], NULL,
+						fuel_gauge_thread_handler,
+						IRQF_ONESHOT, DEV_NAME, info);
+		if (ret)
+			return dev_err_probe(dev, ret, "requesting IRQ %d\n", info->irq[i]);
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id axp288_fg_id_table[] = {
+	{ .name = DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, axp288_fg_id_table);
+
+static struct platform_driver axp288_fuel_gauge_driver = {
+	.probe = axp288_fuel_gauge_probe,
+	.id_table = axp288_fg_id_table,
+	.driver = {
+		.name = DEV_NAME,
+	},
+};
+
+module_platform_driver(axp288_fuel_gauge_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_AUTHOR("Todd Brandt <todd.e.brandt@linux.intel.com>");
+MODULE_DESCRIPTION("Xpower AXP288 Fuel Gauge Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bd99954-charger.c b/drivers/power/supply/bd99954-charger.c
new file mode 100644
index 000000000..96e93e1b8
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.c
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ROHM BD99954 charger driver
+ *
+ * Copyright (C) 2020 Rohm Semiconductors
+ *	Originally written by:
+ *		Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+ *		Markus Laine <markus.laine@fi.rohmeurope.com>
+ *	Bugs added by:
+ *		Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ */
+
+/*
+ *   The battery charging profile of BD99954.
+ *
+ *   Curve (1) represents charging current.
+ *   Curve (2) represents battery voltage.
+ *
+ *   The BD99954 data sheet divides charging to three phases.
+ *   a) Trickle-charge with constant current (8).
+ *   b) pre-charge with constant current (6)
+ *   c) fast-charge, first with constant current (5) phase. After
+ *      the battery voltage has reached target level (4) we have constant
+ *      voltage phase until charging current has dropped to termination
+ *      level (7)
+ *
+ *    V ^                                                        ^ I
+ *      .                                                        .
+ *      .                                                        .
+ *(4)` `.` ` ` ` ` ` ` ` ` ` ` ` ` ` ----------------------------.
+ *      .                           :/                           .
+ *      .                     o----+/:/ ` ` ` ` ` ` ` ` ` ` ` ` `.` ` (5)
+ *      .                     +   ::  +                          .
+ *      .                     +  /-   --                         .
+ *      .                     +`/-     +                         .
+ *      .                     o/-      -:                        .
+ *      .                    .s.        +`                       .
+ *      .                  .--+         `/                       .
+ *      .               ..``  +          .:                      .
+ *      .             -`      +           --                     .
+ *      .    (2)  ...``       +            :-                    .
+ *      .    ...``            +             -:                   .
+ *(3)` `.`.""  ` ` ` `+-------- ` ` ` ` ` ` `.:` ` ` ` ` ` ` ` ` .` ` (6)
+ *      .             +                       `:.                .
+ *      .             +                         -:               .
+ *      .             +                           -:.            .
+ *      .             +                             .--.         .
+ *      .   (1)       +                                `.+` ` ` `.` ` (7)
+ *      -..............` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` + ` ` ` .` ` (8)
+ *      .                                                +       -
+ *      -------------------------------------------------+++++++++-->
+ *      |   trickle   |  pre  |          fast            |
+ *
+ * Details of DT properties for different limits can be found from BD99954
+ * device tree binding documentation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "bd99954-charger.h"
+
+struct battery_data {
+	u16 precharge_current;	/* Trickle-charge Current */
+	u16 fc_reg_voltage;	/* Fast Charging Regulation Voltage */
+	u16 voltage_min;
+	u16 voltage_max;
+};
+
+/* Initial field values, converted to initial register values */
+struct bd9995x_init_data {
+	u16 vsysreg_set;	/* VSYS Regulation Setting */
+	u16 ibus_lim_set;	/* VBUS input current limitation */
+	u16 icc_lim_set;	/* VCC/VACP Input Current Limit Setting */
+	u16 itrich_set;		/* Trickle-charge Current Setting */
+	u16 iprech_set;		/* Pre-Charge Current Setting */
+	u16 ichg_set;		/* Fast-Charge constant current */
+	u16 vfastchg_reg_set1;	/* Fast Charging Regulation Voltage */
+	u16 vprechg_th_set;	/* Pre-charge Voltage Threshold Setting */
+	u16 vrechg_set;		/* Re-charge Battery Voltage Setting */
+	u16 vbatovp_set;	/* Battery Over Voltage Threshold Setting */
+	u16 iterm_set;		/* Charging termination current */
+};
+
+struct bd9995x_state {
+	u8 online;
+	u16 chgstm_status;
+	u16 vbat_vsys_status;
+	u16 vbus_vcc_status;
+};
+
+struct bd9995x_device {
+	struct i2c_client *client;
+	struct device *dev;
+	struct power_supply *charger;
+
+	struct regmap *rmap;
+	struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+	int chip_id;
+	int chip_rev;
+	struct bd9995x_init_data init_data;
+	struct bd9995x_state state;
+
+	struct mutex lock; /* Protect state data */
+};
+
+static const struct regmap_range bd9995x_readonly_reg_ranges[] = {
+	regmap_reg_range(CHGSTM_STATUS, SEL_ILIM_VAL),
+	regmap_reg_range(IOUT_DACIN_VAL, IOUT_DACIN_VAL),
+	regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+	regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+	regmap_reg_range(CHIP_ID, CHIP_REV),
+	regmap_reg_range(SYSTEM_STATUS, SYSTEM_STATUS),
+	regmap_reg_range(IBATP_VAL, VBAT_AVE_VAL),
+	regmap_reg_range(VTH_VAL, EXTIADP_AVE_VAL),
+};
+
+static const struct regmap_access_table bd9995x_writeable_regs = {
+	.no_ranges = bd9995x_readonly_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(bd9995x_readonly_reg_ranges),
+};
+
+static const struct regmap_range bd9995x_volatile_reg_ranges[] = {
+	regmap_reg_range(CHGSTM_STATUS, WDT_STATUS),
+	regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+	regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+	regmap_reg_range(INT0_STATUS, INT7_STATUS),
+	regmap_reg_range(SYSTEM_STATUS, SYSTEM_CTRL_SET),
+	regmap_reg_range(IBATP_VAL, EXTIADP_AVE_VAL), /* Measurement regs */
+};
+
+static const struct regmap_access_table bd9995x_volatile_regs = {
+	.yes_ranges = bd9995x_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(bd9995x_volatile_reg_ranges),
+};
+
+static const struct regmap_range_cfg regmap_range_cfg[] = {
+	{
+	.selector_reg     = MAP_SET,
+	.selector_mask    = 0xFFFF,
+	.selector_shift   = 0,
+	.window_start     = 0,
+	.window_len       = 0x100,
+	.range_min        = 0 * 0x100,
+	.range_max        = 3 * 0x100,
+	},
+};
+
+static const struct regmap_config bd9995x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.reg_stride = 1,
+
+	.max_register = 3 * 0x100,
+	.cache_type = REGCACHE_RBTREE,
+
+	.ranges = regmap_range_cfg,
+	.num_ranges = ARRAY_SIZE(regmap_range_cfg),
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.wr_table = &bd9995x_writeable_regs,
+	.volatile_table = &bd9995x_volatile_regs,
+};
+
+enum bd9995x_chrg_fault {
+	CHRG_FAULT_NORMAL,
+	CHRG_FAULT_INPUT,
+	CHRG_FAULT_THERMAL_SHUTDOWN,
+	CHRG_FAULT_TIMER_EXPIRED,
+};
+
+static int bd9995x_get_prop_batt_health(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+	if (ret)
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+
+	/* TODO: Check these against datasheet page 34 */
+
+	switch (tmp) {
+	case ROOM:
+		return POWER_SUPPLY_HEALTH_GOOD;
+	case HOT1:
+	case HOT2:
+	case HOT3:
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	case COLD1:
+	case COLD2:
+		return POWER_SUPPLY_HEALTH_COLD;
+	case TEMP_DIS:
+	case BATT_OPEN:
+	default:
+		return POWER_SUPPLY_HEALTH_UNKNOWN;
+	}
+}
+
+static int bd9995x_get_prop_charge_type(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_CHGSTM_STATE], &tmp);
+	if (ret)
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+	switch (tmp) {
+	case CHGSTM_TRICKLE_CHARGE:
+	case CHGSTM_PRE_CHARGE:
+		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	case CHGSTM_FAST_CHARGE:
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+	case CHGSTM_TOP_OFF:
+	case CHGSTM_DONE:
+	case CHGSTM_SUSPEND:
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+	default: /* Rest of the states are error related, no charging */
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+	}
+}
+
+static bool bd9995x_get_prop_batt_present(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+	if (ret)
+		return false;
+
+	return tmp != BATT_OPEN;
+}
+
+static int bd9995x_get_prop_batt_voltage(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_VBAT_VAL], &tmp);
+	if (ret)
+		return 0;
+
+	tmp = min(tmp, 19200);
+
+	return tmp * 1000;
+}
+
+static int bd9995x_get_prop_batt_current(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+	if (ret)
+		return 0;
+
+	return tmp * 1000;
+}
+
+#define DEFAULT_BATTERY_TEMPERATURE 250
+
+static int bd9995x_get_prop_batt_temp(struct bd9995x_device *bd)
+{
+	int ret, tmp;
+
+	ret = regmap_field_read(bd->rmap_fields[F_THERM_VAL], &tmp);
+	if (ret)
+		return DEFAULT_BATTERY_TEMPERATURE;
+
+	return (200 - tmp) * 10;
+}
+
+static int bd9995x_power_supply_get_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     union power_supply_propval *val)
+{
+	int ret, tmp;
+	struct bd9995x_device *bd = power_supply_get_drvdata(psy);
+	struct bd9995x_state state;
+
+	mutex_lock(&bd->lock);
+	state = bd->state;
+	mutex_unlock(&bd->lock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (state.chgstm_status) {
+		case CHGSTM_TRICKLE_CHARGE:
+		case CHGSTM_PRE_CHARGE:
+		case CHGSTM_FAST_CHARGE:
+		case CHGSTM_TOP_OFF:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+
+		case CHGSTM_DONE:
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+			break;
+
+		case CHGSTM_SUSPEND:
+		case CHGSTM_TEMPERATURE_ERROR_1:
+		case CHGSTM_TEMPERATURE_ERROR_2:
+		case CHGSTM_TEMPERATURE_ERROR_3:
+		case CHGSTM_TEMPERATURE_ERROR_4:
+		case CHGSTM_TEMPERATURE_ERROR_5:
+		case CHGSTM_TEMPERATURE_ERROR_6:
+		case CHGSTM_TEMPERATURE_ERROR_7:
+		case CHGSTM_THERMAL_SHUT_DOWN_1:
+		case CHGSTM_THERMAL_SHUT_DOWN_2:
+		case CHGSTM_THERMAL_SHUT_DOWN_3:
+		case CHGSTM_THERMAL_SHUT_DOWN_4:
+		case CHGSTM_THERMAL_SHUT_DOWN_5:
+		case CHGSTM_THERMAL_SHUT_DOWN_6:
+		case CHGSTM_THERMAL_SHUT_DOWN_7:
+		case CHGSTM_BATTERY_ERROR:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			break;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BD9995X_MANUFACTURER;
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = state.online;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+		if (ret)
+			return ret;
+		val->intval = tmp * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_AVG:
+		ret = regmap_field_read(bd->rmap_fields[F_IBATP_AVE_VAL], &tmp);
+		if (ret)
+			return ret;
+		val->intval = tmp * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		/*
+		 * Currently the DT uses this property to give the
+		 * target current for fast-charging constant current phase.
+		 * I think it is correct in a sense.
+		 *
+		 * Yet, this prop we read and return here is the programmed
+		 * safety limit for combined input currents. This feels
+		 * also correct in a sense.
+		 *
+		 * However, this results a mismatch to DT value and value
+		 * read from sysfs.
+		 */
+		ret = regmap_field_read(bd->rmap_fields[F_SEL_ILIM_VAL], &tmp);
+		if (ret)
+			return ret;
+		val->intval = tmp * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		if (!state.online) {
+			val->intval = 0;
+			break;
+		}
+
+		ret = regmap_field_read(bd->rmap_fields[F_VFASTCHG_REG_SET1],
+					&tmp);
+		if (ret)
+			return ret;
+
+		/*
+		 * The actual range : 2560 to 19200 mV. No matter what the
+		 * register says
+		 */
+		val->intval = clamp_val(tmp << 4, 2560, 19200);
+		val->intval *= 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = regmap_field_read(bd->rmap_fields[F_ITERM_SET], &tmp);
+		if (ret)
+			return ret;
+		/* Start step is 64 mA */
+		val->intval = tmp << 6;
+		/* Maximum is 1024 mA - no matter what register says */
+		val->intval = min(val->intval, 1024);
+		val->intval *= 1000;
+		break;
+
+	/* Battery properties which we access through charger */
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bd9995x_get_prop_batt_present(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = bd9995x_get_prop_batt_voltage(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = bd9995x_get_prop_batt_current(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = bd9995x_get_prop_charge_type(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = bd9995x_get_prop_batt_health(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = bd9995x_get_prop_batt_temp(bd);
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = "bd99954";
+		break;
+
+	default:
+		return -EINVAL;
+
+	}
+
+	return 0;
+}
+
+static int bd9995x_get_chip_state(struct bd9995x_device *bd,
+				  struct bd9995x_state *state)
+{
+	int i, ret, tmp;
+	struct {
+		struct regmap_field *id;
+		u16 *data;
+	} state_fields[] = {
+		{
+			bd->rmap_fields[F_CHGSTM_STATE], &state->chgstm_status,
+		}, {
+			bd->rmap_fields[F_VBAT_VSYS_STATUS],
+			&state->vbat_vsys_status,
+		}, {
+			bd->rmap_fields[F_VBUS_VCC_STATUS],
+			&state->vbus_vcc_status,
+		},
+	};
+
+
+	for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
+		ret = regmap_field_read(state_fields[i].id, &tmp);
+		if (ret)
+			return ret;
+
+		*state_fields[i].data = tmp;
+	}
+
+	if (state->vbus_vcc_status & STATUS_VCC_DET ||
+	    state->vbus_vcc_status & STATUS_VBUS_DET)
+		state->online = 1;
+	else
+		state->online = 0;
+
+	return 0;
+}
+
+static irqreturn_t bd9995x_irq_handler_thread(int irq, void *private)
+{
+	struct bd9995x_device *bd = private;
+	int ret, status, mask, i;
+	unsigned long tmp;
+	struct bd9995x_state state;
+
+	/*
+	 * The bd9995x does not seem to generate big amount of interrupts.
+	 * The logic regarding which interrupts can cause relevant
+	 * status changes seem to be pretty complex.
+	 *
+	 * So lets implement really simple and hopefully bullet-proof handler:
+	 * It does not really matter which IRQ we handle, we just go and
+	 * re-read all interesting statuses + give the framework a nudge.
+	 *
+	 * Other option would be building a _complex_ and error prone logic
+	 * trying to decide what could have been changed (resulting this IRQ
+	 * we are now handling). During the normal operation the BD99954 does
+	 * not seem to be generating much of interrupts so benefit from such
+	 * logic would probably be minimal.
+	 */
+
+	ret = regmap_read(bd->rmap, INT0_STATUS, &status);
+	if (ret) {
+		dev_err(bd->dev, "Failed to read IRQ status\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_field_read(bd->rmap_fields[F_INT0_SET], &mask);
+	if (ret) {
+		dev_err(bd->dev, "Failed to read IRQ mask\n");
+		return IRQ_NONE;
+	}
+
+	/* Handle only IRQs that are not masked */
+	status &= mask;
+	tmp = status;
+
+	/* Lowest bit does not represent any sub-registers */
+	tmp >>= 1;
+
+	/*
+	 * Mask and ack IRQs we will handle (+ the idiot bit)
+	 */
+	ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], 0);
+	if (ret) {
+		dev_err(bd->dev, "Failed to mask F_INT0\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_write(bd->rmap, INT0_STATUS, status);
+	if (ret) {
+		dev_err(bd->dev, "Failed to ack F_INT0\n");
+		goto err_umask;
+	}
+
+	for_each_set_bit(i, &tmp, 7) {
+		int sub_status, sub_mask;
+		int sub_status_reg[] = {
+			INT1_STATUS, INT2_STATUS, INT3_STATUS, INT4_STATUS,
+			INT5_STATUS, INT6_STATUS, INT7_STATUS,
+		};
+		struct regmap_field *sub_mask_f[] = {
+			bd->rmap_fields[F_INT1_SET],
+			bd->rmap_fields[F_INT2_SET],
+			bd->rmap_fields[F_INT3_SET],
+			bd->rmap_fields[F_INT4_SET],
+			bd->rmap_fields[F_INT5_SET],
+			bd->rmap_fields[F_INT6_SET],
+			bd->rmap_fields[F_INT7_SET],
+		};
+
+		/* Clear sub IRQs */
+		ret = regmap_read(bd->rmap, sub_status_reg[i], &sub_status);
+		if (ret) {
+			dev_err(bd->dev, "Failed to read IRQ sub-status\n");
+			goto err_umask;
+		}
+
+		ret = regmap_field_read(sub_mask_f[i], &sub_mask);
+		if (ret) {
+			dev_err(bd->dev, "Failed to read IRQ sub-mask\n");
+			goto err_umask;
+		}
+
+		/* Ack active sub-statuses */
+		sub_status &= sub_mask;
+
+		ret = regmap_write(bd->rmap, sub_status_reg[i], sub_status);
+		if (ret) {
+			dev_err(bd->dev, "Failed to ack sub-IRQ\n");
+			goto err_umask;
+		}
+	}
+
+	ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+	if (ret)
+		/* May as well retry once */
+		goto err_umask;
+
+	/* Read whole chip state */
+	ret = bd9995x_get_chip_state(bd, &state);
+	if (ret < 0) {
+		dev_err(bd->dev, "Failed to read chip state\n");
+	} else {
+		mutex_lock(&bd->lock);
+		bd->state = state;
+		mutex_unlock(&bd->lock);
+
+		power_supply_changed(bd->charger);
+	}
+
+	return IRQ_HANDLED;
+
+err_umask:
+	ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+	if (ret)
+		dev_err(bd->dev,
+		"Failed to un-mask F_INT0 - IRQ permanently disabled\n");
+
+	return IRQ_NONE;
+}
+
+static int __bd9995x_chip_reset(struct bd9995x_device *bd)
+{
+	int ret, state;
+	int rst_check_counter = 10;
+	u16 tmp = ALLRST | OTPLD;
+
+	ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+	if (ret < 0)
+		return ret;
+
+	do {
+		ret = regmap_field_read(bd->rmap_fields[F_OTPLD_STATE], &state);
+		if (ret)
+			return ret;
+
+		msleep(10);
+	} while (state == 0 && --rst_check_counter);
+
+	if (!rst_check_counter) {
+		dev_err(bd->dev, "chip reset not completed\n");
+		return -ETIMEDOUT;
+	}
+
+	tmp = 0;
+	ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+
+	return ret;
+}
+
+static int bd9995x_hw_init(struct bd9995x_device *bd)
+{
+	int ret;
+	int i;
+	struct bd9995x_state state;
+	struct bd9995x_init_data *id = &bd->init_data;
+
+	const struct {
+		enum bd9995x_fields id;
+		u16 value;
+	} init_data[] = {
+		/* Enable the charging trigger after SDP charger attached */
+		{F_SDP_CHG_TRIG_EN,	1},
+		/* Enable charging trigger after SDP charger attached */
+		{F_SDP_CHG_TRIG,	1},
+		/* Disable charging trigger by BC1.2 detection */
+		{F_VBUS_BC_DISEN,	1},
+		/* Disable charging trigger by BC1.2 detection */
+		{F_VCC_BC_DISEN,	1},
+		/* Disable automatic limitation of the input current */
+		{F_ILIM_AUTO_DISEN,	1},
+		/* Select current limitation when SDP charger attached*/
+		{F_SDP_500_SEL,		1},
+		/* Select current limitation when DCP charger attached */
+		{F_DCP_2500_SEL,	1},
+		{F_VSYSREG_SET,		id->vsysreg_set},
+		/* Activate USB charging and DC/DC converter */
+		{F_USB_SUS,		0},
+		/* DCDC clock: 1200 kHz*/
+		{F_DCDC_CLK_SEL,	3},
+		/* Enable charging */
+		{F_CHG_EN,		1},
+		/* Disable Input current Limit setting voltage measurement */
+		{F_EXTIADPEN,		0},
+		/* Disable input current limiting */
+		{F_VSYS_PRIORITY,	1},
+		{F_IBUS_LIM_SET,	id->ibus_lim_set},
+		{F_ICC_LIM_SET,		id->icc_lim_set},
+		/* Charge Termination Current Setting to 0*/
+		{F_ITERM_SET,		id->iterm_set},
+		/* Trickle-charge Current Setting */
+		{F_ITRICH_SET,		id->itrich_set},
+		/* Pre-charge Current setting */
+		{F_IPRECH_SET,		id->iprech_set},
+		/* Fast Charge Current for constant current phase */
+		{F_ICHG_SET,		id->ichg_set},
+		/* Fast Charge Voltage Regulation Setting */
+		{F_VFASTCHG_REG_SET1,	id->vfastchg_reg_set1},
+		/* Set Pre-charge Voltage Threshold for trickle charging. */
+		{F_VPRECHG_TH_SET,	id->vprechg_th_set},
+		{F_VRECHG_SET,		id->vrechg_set},
+		{F_VBATOVP_SET,		id->vbatovp_set},
+		/* Reverse buck boost voltage Setting */
+		{F_VRBOOST_SET,		0},
+		/* Disable fast-charging watchdog */
+		{F_WDT_FST,		0},
+		/* Disable pre-charging watchdog */
+		{F_WDT_PRE,		0},
+		/* Power save off */
+		{F_POWER_SAVE_MODE,	0},
+		{F_INT1_SET,		INT1_ALL},
+		{F_INT2_SET,		INT2_ALL},
+		{F_INT3_SET,		INT3_ALL},
+		{F_INT4_SET,		INT4_ALL},
+		{F_INT5_SET,		INT5_ALL},
+		{F_INT6_SET,		INT6_ALL},
+		{F_INT7_SET,		INT7_ALL},
+	};
+
+	/*
+	 * Currently we initialize charger to a known state at startup.
+	 * If we want to allow for example the boot code to initialize
+	 * charger we should get rid of this.
+	 */
+	ret = __bd9995x_chip_reset(bd);
+	if (ret < 0)
+		return ret;
+
+	/* Initialize currents/voltages and other parameters */
+	for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+		ret = regmap_field_write(bd->rmap_fields[init_data[i].id],
+					 init_data[i].value);
+		if (ret) {
+			dev_err(bd->dev, "failed to initialize charger (%d)\n",
+				ret);
+			return ret;
+		}
+	}
+
+	ret = bd9995x_get_chip_state(bd, &state);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&bd->lock);
+	bd->state = state;
+	mutex_unlock(&bd->lock);
+
+	return 0;
+}
+
+static enum power_supply_property bd9995x_power_supply_props[] = {
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	/* Battery props we access through charger */
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static const struct power_supply_desc bd9995x_power_supply_desc = {
+	.name = "bd9995x-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = bd9995x_power_supply_props,
+	.num_properties = ARRAY_SIZE(bd9995x_power_supply_props),
+	.get_property = bd9995x_power_supply_get_property,
+};
+
+/*
+ * Limit configurations for vbus-input-current and vcc-vacp-input-current
+ * Minimum limit is 0 uA. Max is 511 * 32000 uA = 16352000 uA. This is
+ * configured by writing a register so that each increment in register
+ * value equals to 32000 uA limit increment.
+ *
+ * Eg, value 0x0 is limit 0, value 0x1 is limit 32000, ...
+ * Describe the setting in linear_range table.
+ */
+static const struct linear_range input_current_limit_ranges[] = {
+	{
+		.min = 0,
+		.step = 32000,
+		.min_sel = 0x0,
+		.max_sel = 0x1ff,
+	},
+};
+
+/* Possible trickle, pre-charging and termination current values */
+static const struct linear_range charging_current_ranges[] = {
+	{
+		.min = 0,
+		.step = 64000,
+		.min_sel = 0x0,
+		.max_sel = 0x10,
+	}, {
+		.min = 1024000,
+		.step = 0,
+		.min_sel = 0x11,
+		.max_sel = 0x1f,
+	},
+};
+
+/*
+ * Fast charging voltage regulation, starting re-charging limit
+ * and battery over voltage protection have same possible values
+ */
+static const struct linear_range charge_voltage_regulation_ranges[] = {
+	{
+		.min = 2560000,
+		.step = 0,
+		.min_sel = 0,
+		.max_sel = 0xA0,
+	}, {
+		.min = 2560000,
+		.step = 16000,
+		.min_sel = 0xA0,
+		.max_sel = 0x4B0,
+	}, {
+		.min = 19200000,
+		.step = 0,
+		.min_sel = 0x4B0,
+		.max_sel = 0x7FF,
+	},
+};
+
+/* Possible VSYS voltage regulation values */
+static const struct linear_range vsys_voltage_regulation_ranges[] = {
+	{
+		.min = 2560000,
+		.step = 0,
+		.min_sel = 0,
+		.max_sel = 0x28,
+	}, {
+		.min = 2560000,
+		.step = 64000,
+		.min_sel = 0x28,
+		.max_sel = 0x12C,
+	}, {
+		.min = 19200000,
+		.step = 0,
+		.min_sel = 0x12C,
+		.max_sel = 0x1FF,
+	},
+};
+
+/* Possible settings for switching from trickle to pre-charging limits */
+static const struct linear_range trickle_to_pre_threshold_ranges[] = {
+	{
+		.min = 2048000,
+		.step = 0,
+		.min_sel = 0,
+		.max_sel = 0x20,
+	}, {
+		.min = 2048000,
+		.step = 64000,
+		.min_sel = 0x20,
+		.max_sel = 0x12C,
+	}, {
+		.min = 19200000,
+		.step = 0,
+		.min_sel = 0x12C,
+		.max_sel = 0x1FF
+	}
+};
+
+/* Possible current values for fast-charging constant current phase */
+static const struct linear_range fast_charge_current_ranges[] = {
+	{
+		.min = 0,
+		.step = 64000,
+		.min_sel = 0,
+		.max_sel = 0xFF,
+	}
+};
+
+struct battery_init {
+	const char *name;
+	int *info_data;
+	const struct linear_range *range;
+	int ranges;
+	u16 *data;
+};
+
+struct dt_init {
+	char *prop;
+	const struct linear_range *range;
+	int ranges;
+	u16 *data;
+};
+
+static int bd9995x_fw_probe(struct bd9995x_device *bd)
+{
+	int ret;
+	struct power_supply_battery_info *info;
+	u32 property;
+	int i;
+	int regval;
+	bool found;
+	struct bd9995x_init_data *init = &bd->init_data;
+	struct battery_init battery_inits[] = {
+		{
+			.name = "trickle-charging current",
+			.range = &charging_current_ranges[0],
+			.ranges = 2,
+			.data = &init->itrich_set,
+		}, {
+			.name = "pre-charging current",
+			.range = &charging_current_ranges[0],
+			.ranges = 2,
+			.data = &init->iprech_set,
+		}, {
+			.name = "pre-to-trickle charge voltage threshold",
+			.range = &trickle_to_pre_threshold_ranges[0],
+			.ranges = 2,
+			.data = &init->vprechg_th_set,
+		}, {
+			.name = "charging termination current",
+			.range = &charging_current_ranges[0],
+			.ranges = 2,
+			.data = &init->iterm_set,
+		}, {
+			.name = "charging re-start voltage",
+			.range = &charge_voltage_regulation_ranges[0],
+			.ranges = 2,
+			.data = &init->vrechg_set,
+		}, {
+			.name = "battery overvoltage limit",
+			.range = &charge_voltage_regulation_ranges[0],
+			.ranges = 2,
+			.data = &init->vbatovp_set,
+		}, {
+			.name = "fast-charging max current",
+			.range = &fast_charge_current_ranges[0],
+			.ranges = 1,
+			.data = &init->ichg_set,
+		}, {
+			.name = "fast-charging voltage",
+			.range = &charge_voltage_regulation_ranges[0],
+			.ranges = 2,
+			.data = &init->vfastchg_reg_set1,
+		},
+	};
+	struct dt_init props[] = {
+		{
+			.prop = "rohm,vsys-regulation-microvolt",
+			.range = &vsys_voltage_regulation_ranges[0],
+			.ranges = 2,
+			.data = &init->vsysreg_set,
+		}, {
+			.prop = "rohm,vbus-input-current-limit-microamp",
+			.range = &input_current_limit_ranges[0],
+			.ranges = 1,
+			.data = &init->ibus_lim_set,
+		}, {
+			.prop = "rohm,vcc-input-current-limit-microamp",
+			.range = &input_current_limit_ranges[0],
+			.ranges = 1,
+			.data = &init->icc_lim_set,
+		},
+	};
+
+	/*
+	 * The power_supply_get_battery_info() does not support getting values
+	 * from ACPI. Let's fix it if ACPI is required here.
+	 */
+	ret = power_supply_get_battery_info(bd->charger, &info);
+	if (ret < 0)
+		return ret;
+
+	/* Put pointers to the generic battery info */
+	battery_inits[0].info_data = &info->tricklecharge_current_ua;
+	battery_inits[1].info_data = &info->precharge_current_ua;
+	battery_inits[2].info_data = &info->precharge_voltage_max_uv;
+	battery_inits[3].info_data = &info->charge_term_current_ua;
+	battery_inits[4].info_data = &info->charge_restart_voltage_uv;
+	battery_inits[5].info_data = &info->overvoltage_limit_uv;
+	battery_inits[6].info_data = &info->constant_charge_current_max_ua;
+	battery_inits[7].info_data = &info->constant_charge_voltage_max_uv;
+
+	for (i = 0; i < ARRAY_SIZE(battery_inits); i++) {
+		int val = *battery_inits[i].info_data;
+		const struct linear_range *range = battery_inits[i].range;
+		int ranges = battery_inits[i].ranges;
+
+		if (val == -EINVAL)
+			continue;
+
+		ret = linear_range_get_selector_low_array(range, ranges, val,
+							  &regval, &found);
+		if (ret) {
+			dev_err(bd->dev, "Unsupported value for %s\n",
+				battery_inits[i].name);
+
+			power_supply_put_battery_info(bd->charger, info);
+			return -EINVAL;
+		}
+		if (!found) {
+			dev_warn(bd->dev,
+				 "Unsupported value for %s - using smaller\n",
+				 battery_inits[i].name);
+		}
+		*(battery_inits[i].data) = regval;
+	}
+
+	power_supply_put_battery_info(bd->charger, info);
+
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		ret = device_property_read_u32(bd->dev, props[i].prop,
+					       &property);
+		if (ret < 0) {
+			dev_err(bd->dev, "failed to read %s", props[i].prop);
+
+			return ret;
+		}
+
+		ret = linear_range_get_selector_low_array(props[i].range,
+							  props[i].ranges,
+							  property, &regval,
+							  &found);
+		if (ret) {
+			dev_err(bd->dev, "Unsupported value for '%s'\n",
+				props[i].prop);
+
+			return -EINVAL;
+		}
+
+		if (!found) {
+			dev_warn(bd->dev,
+				 "Unsupported value for '%s' - using smaller\n",
+				 props[i].prop);
+		}
+
+		*(props[i].data) = regval;
+	}
+
+	return 0;
+}
+
+static void bd9995x_chip_reset(void *bd)
+{
+	__bd9995x_chip_reset(bd);
+}
+
+static int bd9995x_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct bd9995x_device *bd;
+	struct power_supply_config psy_cfg = {};
+	int ret;
+	int i;
+
+	bd = devm_kzalloc(dev, sizeof(*bd), GFP_KERNEL);
+	if (!bd)
+		return -ENOMEM;
+
+	bd->client = client;
+	bd->dev = dev;
+	psy_cfg.drv_data = bd;
+	psy_cfg.of_node = dev->of_node;
+
+	mutex_init(&bd->lock);
+
+	bd->rmap = devm_regmap_init_i2c(client, &bd9995x_regmap_config);
+	if (IS_ERR(bd->rmap)) {
+		dev_err(dev, "Failed to setup register access via i2c\n");
+		return PTR_ERR(bd->rmap);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(bd9995x_reg_fields); i++) {
+		const struct reg_field *reg_fields = bd9995x_reg_fields;
+
+		bd->rmap_fields[i] = devm_regmap_field_alloc(dev, bd->rmap,
+							     reg_fields[i]);
+		if (IS_ERR(bd->rmap_fields[i])) {
+			dev_err(dev, "cannot allocate regmap field\n");
+			return PTR_ERR(bd->rmap_fields[i]);
+		}
+	}
+
+	i2c_set_clientdata(client, bd);
+
+	ret = regmap_field_read(bd->rmap_fields[F_CHIP_ID], &bd->chip_id);
+	if (ret) {
+		dev_err(dev, "Cannot read chip ID.\n");
+		return ret;
+	}
+
+	if (bd->chip_id != BD99954_ID) {
+		dev_err(dev, "Chip with ID=0x%x, not supported!\n",
+			bd->chip_id);
+		return -ENODEV;
+	}
+
+	ret = regmap_field_read(bd->rmap_fields[F_CHIP_REV], &bd->chip_rev);
+	if (ret) {
+		dev_err(dev, "Cannot read revision.\n");
+		return ret;
+	}
+
+	dev_info(bd->dev, "Found BD99954 chip rev %d\n", bd->chip_rev);
+
+	/*
+	 * We need to init the psy before we can call
+	 * power_supply_get_battery_info() for it
+	 */
+	bd->charger = devm_power_supply_register(bd->dev,
+						 &bd9995x_power_supply_desc,
+						&psy_cfg);
+	if (IS_ERR(bd->charger)) {
+		dev_err(dev, "Failed to register power supply\n");
+		return PTR_ERR(bd->charger);
+	}
+
+	ret = bd9995x_fw_probe(bd);
+	if (ret < 0) {
+		dev_err(dev, "Cannot read device properties.\n");
+		return ret;
+	}
+
+	ret = bd9995x_hw_init(bd);
+	if (ret < 0) {
+		dev_err(dev, "Cannot initialize the chip.\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, bd9995x_chip_reset, bd);
+	if (ret)
+		return ret;
+
+	return devm_request_threaded_irq(dev, client->irq, NULL,
+					 bd9995x_irq_handler_thread,
+					 IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					 BD9995X_IRQ_PIN, bd);
+}
+
+static const struct of_device_id bd9995x_of_match[] = {
+	{ .compatible = "rohm,bd99954", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bd9995x_of_match);
+
+static struct i2c_driver bd9995x_driver = {
+	.driver = {
+		.name = "bd9995x-charger",
+		.of_match_table = bd9995x_of_match,
+	},
+	.probe_new = bd9995x_probe,
+};
+module_i2c_driver(bd9995x_driver);
+
+MODULE_AUTHOR("Laine Markus <markus.laine@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD99954 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bd99954-charger.h b/drivers/power/supply/bd99954-charger.h
new file mode 100644
index 000000000..f58897925
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.h
@@ -0,0 +1,1075 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 ROHM Semiconductors */
+#ifndef BD99954_CHARGER_H
+#define BD99954_CHARGER_H
+
+#include <linux/regmap.h>
+
+#define BD9995X_MANUFACTURER "Rohm Semiconductor"
+#define BD9995X_IRQ_PIN      "bd9995x_irq"
+
+#define BD9995X_VSYS_PRECHARGE_OFFSET_MV 200
+
+#define BD99954_ID            0x346
+#define BD99955_ID            0x221
+#define BD99956_ID            0x331
+
+/* Battery Charger Commands */
+#define    CHARGING_CURRENT   0x14
+#define    CHARGING_VOLTAGE   0x15
+#define    PROTECT_SET        0x3E
+#define    MAP_SET            0x3F
+
+/* Extended commands */
+#define    CHGSTM_STATUS       0x100
+#define    VBAT_VSYS_STATUS    0x101
+#define    VBUS_VCC_STATUS     0x102
+#define    CHGOP_STATUS        0x103
+#define    WDT_STATUS          0x104
+#define    CUR_ILIM_VAL        0x105
+#define    SEL_ILIM_VAL        0x106
+#define    IBUS_LIM_SET        0x107
+#define    ICC_LIM_SET         0x108
+#define    IOTG_LIM_SET        0x109
+#define    VIN_CTRL_SET        0x10A
+#define    CHGOP_SET1          0x10B
+#define    CHGOP_SET2          0x10C
+#define    VBUSCLPS_TH_SET     0x10D
+#define    VCCCLPS_TH_SET      0x10E
+#define    CHGWDT_SET          0x10F
+#define    BATTWDT_SET         0x110
+#define    VSYSREG_SET         0x111
+#define    VSYSVAL_THH_SET     0x112
+#define    VSYSVAL_THL_SET     0x113
+#define    ITRICH_SET          0x114
+#define    IPRECH_SET          0x115
+#define    ICHG_SET            0x116
+#define    ITERM_SET           0x117
+#define    VPRECHG_TH_SET      0x118
+#define    VRBOOST_SET         0x119
+#define    VFASTCHG_REG_SET1   0x11A
+#define    VFASTCHG_REG_SET2   0x11B
+#define    VFASTCHG_REG_SET3   0x11C
+#define    VRECHG_SET          0x11D
+#define    VBATOVP_SET         0x11E
+#define    IBATSHORT_SET       0x11F
+#define    PROCHOT_CTRL_SET    0x120
+#define    PROCHOT_ICRIT_SET   0x121
+#define    PROCHOT_INORM_SET   0x122
+#define    PROCHOT_IDCHG_SET   0x123
+#define    PROCHOT_VSYS_SET    0x124
+#define    PMON_IOUT_CTRL_SET  0x125
+#define    PMON_DACIN_VAL      0x126
+#define    IOUT_DACIN_VAL      0x127
+#define    VCC_UCD_SET         0x128
+#define    VCC_UCD_STATUS      0x129
+#define    VCC_IDD_STATUS      0x12A
+#define    VCC_UCD_FCTRL_SET   0x12B
+#define    VCC_UCD_FCTRL_EN    0x12C
+#define    VBUS_UCD_SET        0x130
+#define    VBUS_UCD_STATUS     0x131
+#define    VBUS_IDD_STATUS     0x132
+#define    VBUS_UCD_FCTRL_SET  0x133
+#define    VBUS_UCD_FCTRL_EN   0x134
+#define    CHIP_ID             0x138
+#define    CHIP_REV            0x139
+#define    IC_SET1             0x13A
+#define    IC_SET2             0x13B
+#define    SYSTEM_STATUS       0x13C
+#define    SYSTEM_CTRL_SET     0x13D
+#define    VM_CTRL_SET         0x140
+#define    THERM_WINDOW_SET1   0x141
+#define    THERM_WINDOW_SET2   0x142
+#define    THERM_WINDOW_SET3   0x143
+#define    THERM_WINDOW_SET4   0x144
+#define    THERM_WINDOW_SET5   0x145
+#define    IBATP_TH_SET        0x146
+#define    IBATM_TH_SET        0x147
+#define    VBAT_TH_SET         0x148
+#define    THERM_TH_SET        0x149
+#define    IACP_TH_SET         0x14A
+#define    VACP_TH_SET         0x14B
+#define    VBUS_TH_SET         0x14C
+#define    VCC_TH_SET          0x14D
+#define    VSYS_TH_SET         0x14E
+#define    EXTIADP_TH_SET      0x14F
+#define    IBATP_VAL           0x150
+#define    IBATP_AVE_VAL       0x151
+#define    IBATM_VAL           0x152
+#define    IBATM_AVE_VAL       0x153
+#define    VBAT_VAL            0x154
+#define    VBAT_AVE_VAL        0x155
+#define    THERM_VAL           0x156
+#define    VTH_VAL             0x157
+#define    IACP_VAL            0x158
+#define    IACP_AVE_VAL        0x159
+#define    VACP_VAL            0x15A
+#define    VACP_AVE_VAL        0x15B
+#define    VBUS_VAL            0x15C
+#define    VBUS_AVE_VAL        0x15D
+#define    VCC_VAL             0x15E
+#define    VCC_AVE_VAL         0x15F
+#define    VSYS_VAL            0x160
+#define    VSYS_AVE_VAL        0x161
+#define    EXTIADP_VAL         0x162
+#define    EXTIADP_AVE_VAL     0x163
+#define    VACPCLPS_TH_SET     0x164
+#define    INT0_SET            0x168
+#define    INT1_SET            0x169
+#define    INT2_SET            0x16A
+#define    INT3_SET            0x16B
+#define    INT4_SET            0x16C
+#define    INT5_SET            0x16D
+#define    INT6_SET            0x16E
+#define    INT7_SET            0x16F
+#define    INT0_STATUS         0x170
+#define    INT1_STATUS         0x171
+#define    INT2_STATUS         0x172
+#define    INT3_STATUS         0x173
+#define    INT4_STATUS         0x174
+#define    INT5_STATUS         0x175
+#define    INT6_STATUS         0x176
+#define    INT7_STATUS         0x177
+#define    OTPREG0             0x17A
+#define    OTPREG1             0x17B
+#define    SMBREG              0x17C
+#define    DEBUG_MODE_SET      0x17F
+#define    DEBUG0x14           0x214
+#define    DEBUG0x1A           0x21A
+
+enum bd9995x_fields {
+	F_PREV_CHGSTM_STATE, F_CHGSTM_STATE,
+	F_VBAT_VSYS_STATUS,
+	F_VBUS_VCC_STATUS,
+	F_BATTEMP, F_VRECHG_DET, F_RBOOST_UV, F_RBOOSTS,
+	F_THERMWDT_VAL, F_CHGWDT_VAL,
+	F_CUR_ILIM_VAL,
+	F_SEL_ILIM_VAL,
+	F_IBUS_LIM_SET,
+	F_ICC_LIM_SET,
+	F_IOTG_LIM_SET,
+	F_OTG_BOTH_EN,
+	F_VRBOOST_TRIG,
+	F_VRBOOST_EN,
+	F_PP_BOTH_THRU,
+	F_VIN_ORD,
+	F_VBUS_EN,
+	F_VCC_EN,
+	F_VSYS_PRIORITY,
+	F_PPC_SUB_CAP,
+	F_PPC_CAP,
+	F_DCP_2500_SEL,
+	F_SDP_500_SEL,
+	F_ILIM_AUTO_DISEN,
+	F_VCC_BC_DISEN,
+	F_VBUS_BC_DISEN,
+	F_SDP_CHG_TRIG_EN,
+	F_SDP_CHG_TRIG,
+	F_AUTO_TOF,
+	F_AUTO_FST,
+	F_AUTO_RECH,
+	F_ILIM_RESET_EN,
+	F_DCDC_1MS_SEL,
+	F_SEL_ILIM_DIV,
+	F_BATT_LEARN,
+	F_CHG_EN,
+	F_USB_SUS,
+	F_CHOP_SS_INIT,
+	F_CHOP_ALL_INIT,
+	F_DCDC_CLK_SEL,
+	F_CHOP_SS,
+	F_CHOP_ALL,
+	F_VBUSCLPS_TH_SET,
+	F_VCCCLPS_TH_SET,
+	F_WDT_FST,
+	F_WDT_PRE,
+	F_WDT_IBAT_SHORT,
+	F_WDT_THERM,
+	F_VSYSREG_SET,
+	F_VSYSVAL_THH_SET,
+	F_VSYSVAL_THL_SET,
+	F_ITRICH_SET,
+	F_IPRECH_SET,
+	F_ICHG_SET,
+	F_ITERM_SET,
+	F_VPRECHG_TH_SET,
+	F_VRBOOST_SET,
+	F_VFASTCHG_REG_SET1,
+	F_VFASTCHG_REG_SET2,
+	F_VFASTCHG_REG_SET3,
+	F_VRECHG_SET,
+	F_VBATOVP_SET,
+	F_IBATM_SHORT_SET,
+	F_PROCHOT_DG_SET,
+	F_PROCHOT_ICRIT_DG_SET,
+	F_PROCHOT_IDCHG_DG_SET,
+	F_PROCHOT_EN,
+	F_PROCHOT_ICRIT_SET,
+	F_PROCHOT_INORM_SET,
+	F_PROCHOT_IDCHG_SET,
+	F_PROCHOT_VSYS_SET,
+	F_IMON_INSEL,
+	F_PMON_INSEL,
+	F_IOUT_OUT_EN,
+	F_IOUT_SOURCE_SEL,
+	F_IOUT_GAIN_SET,
+	F_PMON_OUT_EN,
+	F_PMON_GAIN_SET,
+	F_PMON_DACIN_VAL,
+	F_IOUT_DACIN_VAL,
+	F_VCC_BCSRETRY,
+	F_VCC_ADCRTRY,
+	F_VCC_USBDETEN,
+	F_VCC_IDRDETEN,
+	F_VCC_ENUMRDY,
+	F_VCC_ADCPOLEN,
+	F_VCC_DCDMODE,
+	F_VCC_USB_SW_EN,
+	F_VCC_USB_SW,
+	F_VCC_DCDFAIL,
+	F_VCC_CHGPORT,
+	F_VCC_PUPDET,
+	F_VCC_VBUS_VLD,
+	F_VCC_CHGDET,
+	F_VCC_OTGDET,
+	F_VCC_VBINOP,
+	F_VCC_EXTID,
+	F_VCC_IDRDET,
+	F_VCC_INDO,
+	F_VCC_UCDSWEN,
+	F_VCC_RREF_EN,
+	F_VCC_DPPU_EN,
+	F_VCC_DPREF_EN,
+	F_VCC_DMREF_EN,
+	F_VCC_DPDET_EN,
+	F_VCC_DMDET_EN,
+	F_VCC_DPSINK_EN,
+	F_VCC_DMSINK_EN,
+	F_VCC_DP_BUFF_EN,
+	F_VCC_DM_BUFF_EN,
+	F_VCC_EXTCLKENBL,
+	F_VCC_PLSTESTEN,
+	F_VCC_UCDSWEN_TSTENB,
+	F_VCC_RREF_EN_TSTENB,
+	F_VCC_DPPU_EN_TSTENB,
+	F_VCC_DPREF_EN_TSTENB,
+	F_VCC_DMREF_EN_TSTENB,
+	F_VCC_DPDET_EN_TSTENB,
+	F_VCC_DMDET_EN_TSTENB,
+	F_VCC_DPSINK_EN_TSTENB,
+	F_VCC_DMSINK_EN_TSTENB,
+	F_VCC_DP_BUFF_EN_TSTENB,
+	F_VCC_DM_BUFF_EN_TSTENB,
+	F_VBUS_BCSRETRY,
+	F_VBUS_ADCRTRY,
+	F_VBUS_USBDETEN,
+	F_VBUS_IDRDETEN,
+	F_VBUS_ENUMRDY,
+	F_VBUS_ADCPOLEN,
+	F_VBUS_DCDMODE,
+	F_VBUS_USB_SW_EN,
+	F_VBUS_USB_SW,
+	F_VBUS_DCDFAIL,
+	F_VBUS_CHGPORT,
+	F_VBUS_PUPDET,
+	F_VBUS_VBUS_VLD,
+	F_VBUS_CHGDET,
+	F_VBUS_OTGDET,
+	F_VBUS_VBINOP,
+	F_VBUS_EXTID,
+	F_VBUS_IDRDET,
+	F_VBUS_INDO,
+	F_VBUS_UCDSWEN,
+	F_VBUS_RREF_EN,
+	F_VBUS_DPPU_EN,
+	F_VBUS_DPREF_EN,
+	F_VBUS_DMREF_EN,
+	F_VBUS_DPDET_EN,
+	F_VBUS_DMDET_EN,
+	F_VBUS_DPSINK_EN,
+	F_VBUS_DMSINK_EN,
+	F_VBUS_DP_BUFF_EN,
+	F_VBUS_DM_BUFF_EN,
+	F_VBUS_EXTCLKENBL,
+	F_VBUS_PLSTESTEN,
+	F_VBUS_UCDSWEN_TSTENB,
+	F_VBUS_RREF_EN_TSTENB,
+	F_VBUS_DPPU_EN_TSTENB,
+	F_VBUS_DPREF_EN_TSTENB,
+	F_VBUS_DMREF_EN_TSTENB,
+	F_VBUS_DPDET_EN_TSTENB,
+	F_VBUS_DMDET_EN_TSTENB,
+	F_VBUS_DPSINK_EN_TSTENB,
+	F_VBUS_DMSINK_EN_TSTENB,
+	F_VBUS_DP_BUFF_EN_TSTENB,
+	F_VBUS_DM_BUFF_EN_TSTENB,
+	F_CHIP_ID,
+	F_CHIP_REV,
+	F_ONE_CELL_MODE,
+	F_cell,
+	F_VACP_AUTO_DISCHG,
+	F_VACP_LOAD,
+	F_ACOK_POL,
+	F_ACOK_DISEN,
+	F_DEBUG_SET1,
+	F_DEBUG_SET0,
+	F_MONRST_STATE,
+	F_ALMRST_STATE,
+	F_CHGRST_STATE,
+	F_OTPLD_STATE,
+	F_ALLRST_STATE,
+	F_PROTECT_SET,
+	F_MAP_SET,
+	F_ADCINTERVAL,
+	F_ADCMOD,
+	F_ADCTMOD,
+	F_EXTIADPEN,
+	F_VSYSENB,
+	F_VCCENB,
+	F_VBUSENB,
+	F_VACPENB,
+	F_IACPENB,
+	F_THERMENB,
+	F_VBATENB,
+	F_IBATMENB,
+	F_IBATPENB,
+	F_TMPTHR1B,
+	F_TMPTHR1A,
+	F_TMPTHR2B,
+	F_TMPTHR2A,
+	F_TMPTHR3B,
+	F_TMPTHR3A,
+	F_TMPTHR4B,
+	F_TMPTHR4A,
+	F_TMPTHR5B,
+	F_TMPTHR5A,
+	F_IBATP_TH_SET,
+	F_IBATM_TH_SET,
+	F_VBAT_TH_SET,
+	F_THERM_TH_SET,
+	F_IACP_TH_SET,
+	F_VACP_TH_SET,
+	F_VBUS_TH_SET,
+	F_VCC_TH_SET,
+	F_VSYS_TH_SET,
+	F_EXTIADP_TH_SET,
+	F_IBATP_VAL,
+	F_IBATP_AVE_VAL,
+	F_IBATM_VAL,
+	F_IBATM_AVE_VAL,
+	F_VBAT_VAL,
+	F_VBAT_AVE_VAL,
+	F_THERM_VAL,
+	F_VTH_VAL,
+	F_IACP_VAL,
+	F_IACP_AVE_VAL,
+	F_VACP_VAL,
+	F_VACP_AVE_VAL,
+	F_VBUS_VAL,
+	F_VBUS_AVE_VAL,
+	F_VCC_VAL,
+	F_VCC_AVE_VAL,
+	F_VSYS_VAL,
+	F_VSYS_AVE_VAL,
+	F_EXTIADP_VAL,
+	F_EXTIADP_AVE_VAL,
+	F_VACPCLPS_TH_SET,
+	F_INT7_SET,
+	F_INT6_SET,
+	F_INT5_SET,
+	F_INT4_SET,
+	F_INT3_SET,
+	F_INT2_SET,
+	F_INT1_SET,
+	F_INT0_SET,
+	F_VBUS_RBUV_DET,
+	F_VBUS_RBUV_RES,
+	F_VBUS_TH_DET,
+	F_VBUS_TH_RES,
+	F_VBUS_IIN_MOD,
+	F_VBUS_OV_DET,
+	F_VBUS_OV_RES,
+	F_VBUS_CLPS_DET,
+	F_VBUS_CLPS,
+	F_VBUS_DET,
+	F_VBUS_RES,
+	F_VCC_RBUV_DET,
+	F_VCC_RBUV_RES,
+	F_VCC_TH_DET,
+	F_VCC_TH_RES,
+	F_VCC_IIN_MOD,
+	F_VCC_OVP_DET,
+	F_VCC_OVP_RES,
+	F_VCC_CLPS_DET,
+	F_VCC_CLPS_RES,
+	F_VCC_DET,
+	F_VCC_RES,
+	F_TH_DET,
+	F_TH_RMV,
+	F_TMP_OUT_DET,
+	F_TMP_OUT_RES,
+	F_VBAT_TH_DET,
+	F_VBAT_TH_RES,
+	F_IBAT_SHORT_DET,
+	F_IBAT_SHORT_RES,
+	F_VBAT_OV_DET,
+	F_VBAT_OV_RES,
+	F_BAT_ASSIST_DET,
+	F_BAT_ASSIST_RES,
+	F_VSYS_TH_DET,
+	F_VSYS_TH_RES,
+	F_VSYS_OV_DET,
+	F_VSYS_OV_RES,
+	F_VSYS_SHT_DET,
+	F_VSYS_SHT_RES,
+	F_VSYS_UV_DET,
+	F_VSYS_UV_RES,
+	F_OTP_LOAD_DONE,
+	F_PWR_ON,
+	F_EXTIADP_TRNS,
+	F_EXTIADP_TH_DET,
+	F_EXIADP_TH_RES,
+	F_BAT_MNT_DET,
+	F_BAT_MNT_RES,
+	F_TSD_DET,
+	F_TSD_RES,
+	F_CHGWDT_EXP,
+	F_THERMWDT_EXP,
+	F_TMP_TRNS,
+	F_CHG_TRNS,
+	F_VBUS_UCD_PORT_DET,
+	F_VBUS_UCD_UCHG_DET,
+	F_VBUS_UCD_URID_RMV,
+	F_VBUS_UCD_OTG_DET,
+	F_VBUS_UCD_URID_MOD,
+	F_VCC_UCD_PORT_DET,
+	F_VCC_UCD_UCHG_DET,
+	F_VCC_UCD_URID_RMV,
+	F_VCC_UCD_OTG_DET,
+	F_VCC_UCD_URID_MOD,
+	F_PROCHOT_DET,
+	F_PROCHOT_RES,
+	F_VACP_DET,
+	F_VACP_RES,
+	F_VACP_TH_DET,
+	F_VACP_TH_RES,
+	F_IACP_TH_DET,
+	F_IACP_THE_RES,
+	F_THERM_TH_DET,
+	F_THERM_TH_RES,
+	F_IBATM_TH_DET,
+	F_IBATM_TH_RES,
+	F_IBATP_TH_DET,
+	F_IBATP_TH_RES,
+	F_INT7_STATUS,
+	F_INT6_STATUS,
+	F_INT5_STATUS,
+	F_INT4_STATUS,
+	F_INT3_STATUS,
+	F_INT2_STATUS,
+	F_INT1_STATUS,
+	F_INT0_STATUS,
+	F_ILIM_DECREASE,
+	F_RESERVE_OTPREG1,
+	F_POWER_SAVE_MODE,
+	F_DEBUG_MODE_SET,
+	F_DEBUG0x14,
+	F_DEBUG0x1A,
+	F_MAX_FIELDS
+};
+
+static const struct reg_field bd9995x_reg_fields[] = {
+	    [F_PREV_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 8, 14),
+	    [F_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 0, 6),
+	    [F_VBAT_VSYS_STATUS] = REG_FIELD(VBAT_VSYS_STATUS, 0, 15),
+	    [F_VBUS_VCC_STATUS] = REG_FIELD(VBUS_VCC_STATUS, 0, 12),
+	    [F_BATTEMP] = REG_FIELD(CHGOP_STATUS, 8, 10),
+	    [F_VRECHG_DET] = REG_FIELD(CHGOP_STATUS, 6, 6),
+	    [F_RBOOST_UV] = REG_FIELD(CHGOP_STATUS, 1, 1),
+	    [F_RBOOSTS] = REG_FIELD(CHGOP_STATUS, 0, 0),
+	    [F_THERMWDT_VAL] = REG_FIELD(WDT_STATUS, 8, 15),
+	    [F_CHGWDT_VAL] = REG_FIELD(WDT_STATUS, 0, 7),
+	    [F_CUR_ILIM_VAL] = REG_FIELD(CUR_ILIM_VAL, 0, 13),
+	    [F_SEL_ILIM_VAL] = REG_FIELD(SEL_ILIM_VAL, 0, 13),
+	    [F_IBUS_LIM_SET] = REG_FIELD(IBUS_LIM_SET, 5, 13),
+	    [F_ICC_LIM_SET] = REG_FIELD(ICC_LIM_SET, 5, 13),
+	    [F_IOTG_LIM_SET] = REG_FIELD(IOTG_LIM_SET, 5, 13),
+	    [F_OTG_BOTH_EN] = REG_FIELD(VIN_CTRL_SET, 15, 15),
+	    [F_VRBOOST_TRIG] = REG_FIELD(VIN_CTRL_SET, 14, 14),
+	    [F_VRBOOST_EN] = REG_FIELD(VIN_CTRL_SET, 12, 13),
+	    [F_PP_BOTH_THRU] = REG_FIELD(VIN_CTRL_SET, 11, 11),
+	    [F_VIN_ORD] = REG_FIELD(VIN_CTRL_SET, 7, 7),
+	    [F_VBUS_EN] = REG_FIELD(VIN_CTRL_SET, 6, 6),
+	    [F_VCC_EN] = REG_FIELD(VIN_CTRL_SET, 5, 5),
+	    [F_VSYS_PRIORITY] = REG_FIELD(VIN_CTRL_SET, 4, 4),
+	    [F_PPC_SUB_CAP] = REG_FIELD(VIN_CTRL_SET, 2, 3),
+	    [F_PPC_CAP] = REG_FIELD(VIN_CTRL_SET, 0, 1),
+	    [F_DCP_2500_SEL] = REG_FIELD(CHGOP_SET1, 15, 15),
+	    [F_SDP_500_SEL] = REG_FIELD(CHGOP_SET1, 14, 14),
+	    [F_ILIM_AUTO_DISEN] = REG_FIELD(CHGOP_SET1, 13, 13),
+	    [F_VCC_BC_DISEN] = REG_FIELD(CHGOP_SET1, 11, 11),
+	    [F_VBUS_BC_DISEN] = REG_FIELD(CHGOP_SET1, 10, 10),
+	    [F_SDP_CHG_TRIG_EN] = REG_FIELD(CHGOP_SET1, 9, 9),
+	    [F_SDP_CHG_TRIG] = REG_FIELD(CHGOP_SET1, 8, 8),
+	    [F_AUTO_TOF] = REG_FIELD(CHGOP_SET1, 6, 6),
+	    [F_AUTO_FST] = REG_FIELD(CHGOP_SET1, 5, 5),
+	    [F_AUTO_RECH] = REG_FIELD(CHGOP_SET1, 3, 3),
+	    [F_ILIM_RESET_EN] = REG_FIELD(CHGOP_SET2, 14, 14),
+	    [F_DCDC_1MS_SEL] = REG_FIELD(CHGOP_SET2, 12, 13),
+	    [F_SEL_ILIM_DIV] = REG_FIELD(CHGOP_SET2, 10, 10),
+	    [F_BATT_LEARN] = REG_FIELD(CHGOP_SET2, 8, 8),
+	    [F_CHG_EN] = REG_FIELD(CHGOP_SET2, 7, 7),
+	    [F_USB_SUS] = REG_FIELD(CHGOP_SET2, 6, 6),
+	    [F_CHOP_SS_INIT] = REG_FIELD(CHGOP_SET2, 5, 5),
+	    [F_CHOP_ALL_INIT] = REG_FIELD(CHGOP_SET2, 4, 4),
+	    [F_DCDC_CLK_SEL] = REG_FIELD(CHGOP_SET2, 2, 3),
+	    [F_CHOP_SS] = REG_FIELD(CHGOP_SET2, 1, 1),
+	    [F_CHOP_ALL] = REG_FIELD(CHGOP_SET2, 0, 0),
+	    [F_VBUSCLPS_TH_SET] = REG_FIELD(VBUSCLPS_TH_SET, 7, 14),
+	    [F_VCCCLPS_TH_SET] = REG_FIELD(VCCCLPS_TH_SET, 7, 14),
+	    [F_WDT_FST] = REG_FIELD(CHGWDT_SET, 8, 15),
+	    [F_WDT_PRE] = REG_FIELD(CHGWDT_SET, 0, 7),
+	    [F_WDT_IBAT_SHORT] = REG_FIELD(BATTWDT_SET, 8, 15),
+	    [F_WDT_THERM] = REG_FIELD(BATTWDT_SET, 0, 7),
+	    [F_VSYSREG_SET] = REG_FIELD(VSYSREG_SET, 6, 14),
+	    [F_VSYSVAL_THH_SET] = REG_FIELD(VSYSVAL_THH_SET, 6, 14),
+	    [F_VSYSVAL_THL_SET] = REG_FIELD(VSYSVAL_THL_SET, 6, 14),
+	    [F_ITRICH_SET] = REG_FIELD(ITRICH_SET, 6, 10),
+	    [F_IPRECH_SET] = REG_FIELD(IPRECH_SET, 6, 10),
+	    [F_ICHG_SET] = REG_FIELD(ICHG_SET, 6, 13),
+	    [F_ITERM_SET] = REG_FIELD(ITERM_SET, 6, 10),
+	    [F_VPRECHG_TH_SET] = REG_FIELD(VPRECHG_TH_SET, 6, 14),
+	    [F_VRBOOST_SET] = REG_FIELD(VRBOOST_SET, 6, 14),
+	    [F_VFASTCHG_REG_SET1] = REG_FIELD(VFASTCHG_REG_SET1, 4, 14),
+	    [F_VFASTCHG_REG_SET2] = REG_FIELD(VFASTCHG_REG_SET2, 4, 14),
+	    [F_VFASTCHG_REG_SET3] = REG_FIELD(VFASTCHG_REG_SET3, 4, 14),
+	    [F_VRECHG_SET] = REG_FIELD(VRECHG_SET, 4, 14),
+	    [F_VBATOVP_SET] = REG_FIELD(VBATOVP_SET, 4, 14),
+	    [F_IBATM_SHORT_SET] = REG_FIELD(IBATSHORT_SET, 0, 14),
+	    [F_PROCHOT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 14, 15),
+	    [F_PROCHOT_ICRIT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 10, 11),
+	    [F_PROCHOT_IDCHG_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 8, 9),
+	    [F_PROCHOT_EN] = REG_FIELD(PROCHOT_CTRL_SET, 0, 4),
+	    [F_PROCHOT_ICRIT_SET] = REG_FIELD(PROCHOT_ICRIT_SET, 0, 14),
+	    [F_PROCHOT_INORM_SET] = REG_FIELD(PROCHOT_INORM_SET, 0, 14),
+	    [F_PROCHOT_IDCHG_SET] = REG_FIELD(PROCHOT_IDCHG_SET, 0, 14),
+	    [F_PROCHOT_VSYS_SET] = REG_FIELD(PROCHOT_VSYS_SET, 0, 14),
+	    [F_IMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 9, 9),
+	    [F_PMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 8, 8),
+	    [F_IOUT_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 7, 7),
+	    [F_IOUT_SOURCE_SEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 6, 6),
+	    [F_IOUT_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 4, 5),
+	    [F_PMON_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 3, 3),
+	    [F_PMON_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 0, 2),
+	    [F_PMON_DACIN_VAL] = REG_FIELD(PMON_DACIN_VAL, 0, 9),
+	    [F_IOUT_DACIN_VAL] = REG_FIELD(IOUT_DACIN_VAL, 0, 11),
+	    [F_VCC_BCSRETRY] = REG_FIELD(VCC_UCD_SET, 12, 12),
+	    [F_VCC_ADCRTRY] = REG_FIELD(VCC_UCD_SET, 8, 8),
+	    [F_VCC_USBDETEN] = REG_FIELD(VCC_UCD_SET, 7, 7),
+	    [F_VCC_IDRDETEN] = REG_FIELD(VCC_UCD_SET, 6, 6),
+	    [F_VCC_ENUMRDY] = REG_FIELD(VCC_UCD_SET, 5, 5),
+	    [F_VCC_ADCPOLEN] = REG_FIELD(VCC_UCD_SET, 4, 4),
+	    [F_VCC_DCDMODE] = REG_FIELD(VCC_UCD_SET, 3, 3),
+	    [F_VCC_USB_SW_EN] = REG_FIELD(VCC_UCD_SET, 1, 1),
+	    [F_VCC_USB_SW] = REG_FIELD(VCC_UCD_SET, 0, 0),
+	    [F_VCC_DCDFAIL] = REG_FIELD(VCC_UCD_STATUS, 15, 15),
+	    [F_VCC_CHGPORT] = REG_FIELD(VCC_UCD_STATUS, 12, 13),
+	    [F_VCC_PUPDET] = REG_FIELD(VCC_UCD_STATUS, 11, 11),
+	    [F_VCC_VBUS_VLD] = REG_FIELD(VCC_UCD_STATUS, 7, 7),
+	    [F_VCC_CHGDET] = REG_FIELD(VCC_UCD_STATUS, 6, 6),
+	    [F_VCC_OTGDET] = REG_FIELD(VCC_UCD_STATUS, 3, 3),
+	    [F_VCC_VBINOP] = REG_FIELD(VCC_IDD_STATUS, 6, 6),
+	    [F_VCC_EXTID] = REG_FIELD(VCC_IDD_STATUS, 5, 5),
+	    [F_VCC_IDRDET] = REG_FIELD(VCC_IDD_STATUS, 4, 4),
+	    [F_VCC_INDO] = REG_FIELD(VCC_IDD_STATUS, 0, 3),
+	    [F_VCC_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+	    [F_VCC_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+	    [F_VCC_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+	    [F_VCC_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+	    [F_VCC_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+	    [F_VCC_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+	    [F_VCC_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+	    [F_VCC_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+	    [F_VCC_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+	    [F_VCC_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+	    [F_VCC_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+	    [F_VCC_EXTCLKENBL] = REG_FIELD(VCC_UCD_FCTRL_EN, 15, 15),
+	    [F_VCC_PLSTESTEN] = REG_FIELD(VCC_UCD_FCTRL_EN, 14, 14),
+	    [F_VCC_UCDSWEN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 10, 10),
+	    [F_VCC_RREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 9, 9),
+	    [F_VCC_DPPU_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 8, 8),
+	    [F_VCC_DPREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 7, 7),
+	    [F_VCC_DMREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 6, 6),
+	    [F_VCC_DPDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 5, 5),
+	    [F_VCC_DMDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 4, 4),
+	    [F_VCC_DPSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 3, 3),
+	    [F_VCC_DMSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 2, 2),
+	    [F_VCC_DP_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 1, 1),
+	    [F_VCC_DM_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 0, 0),
+
+	    [F_VBUS_BCSRETRY] = REG_FIELD(VBUS_UCD_SET, 12, 12),
+	    [F_VBUS_ADCRTRY] = REG_FIELD(VBUS_UCD_SET, 8, 8),
+	    [F_VBUS_USBDETEN] = REG_FIELD(VBUS_UCD_SET, 7, 7),
+	    [F_VBUS_IDRDETEN] = REG_FIELD(VBUS_UCD_SET, 6, 6),
+	    [F_VBUS_ENUMRDY] = REG_FIELD(VBUS_UCD_SET, 5, 5),
+	    [F_VBUS_ADCPOLEN] = REG_FIELD(VBUS_UCD_SET, 4, 4),
+	    [F_VBUS_DCDMODE] = REG_FIELD(VBUS_UCD_SET, 3, 3),
+	    [F_VBUS_USB_SW_EN] = REG_FIELD(VBUS_UCD_SET, 1, 1),
+	    [F_VBUS_USB_SW] = REG_FIELD(VBUS_UCD_SET, 0, 0),
+	    [F_VBUS_DCDFAIL] = REG_FIELD(VBUS_UCD_STATUS, 15, 15),
+	    [F_VBUS_CHGPORT] = REG_FIELD(VBUS_UCD_STATUS, 12, 13),
+	    [F_VBUS_PUPDET] = REG_FIELD(VBUS_UCD_STATUS, 11, 11),
+	    [F_VBUS_VBUS_VLD] = REG_FIELD(VBUS_UCD_STATUS, 7, 7),
+	    [F_VBUS_CHGDET] = REG_FIELD(VBUS_UCD_STATUS, 6, 6),
+	    [F_VBUS_OTGDET] = REG_FIELD(VBUS_UCD_STATUS, 3, 3),
+	    [F_VBUS_VBINOP] = REG_FIELD(VBUS_IDD_STATUS, 6, 6),
+	    [F_VBUS_EXTID] = REG_FIELD(VBUS_IDD_STATUS, 5, 5),
+	    [F_VBUS_IDRDET] = REG_FIELD(VBUS_IDD_STATUS, 4, 4),
+	    [F_VBUS_INDO] = REG_FIELD(VBUS_IDD_STATUS, 0, 3),
+	    [F_VBUS_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+	    [F_VBUS_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+	    [F_VBUS_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+	    [F_VBUS_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+	    [F_VBUS_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+	    [F_VBUS_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+	    [F_VBUS_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+	    [F_VBUS_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+	    [F_VBUS_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+	    [F_VBUS_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+	    [F_VBUS_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+
+	    [F_VBUS_EXTCLKENBL] = REG_FIELD(VBUS_UCD_FCTRL_EN, 15, 15),
+	    [F_VBUS_PLSTESTEN] = REG_FIELD(VBUS_UCD_FCTRL_EN, 14, 14),
+	    [F_VBUS_UCDSWEN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 10, 10),
+	    [F_VBUS_RREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 9, 9),
+	    [F_VBUS_DPPU_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 8, 8),
+	    [F_VBUS_DPREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 7, 7),
+	    [F_VBUS_DMREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 6, 6),
+	    [F_VBUS_DPDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 5, 5),
+	    [F_VBUS_DMDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 4, 4),
+	    [F_VBUS_DPSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 3, 3),
+	    [F_VBUS_DMSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 2, 2),
+	    [F_VBUS_DP_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 1, 1),
+	    [F_VBUS_DM_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 0, 0),
+
+	    [F_CHIP_ID] = REG_FIELD(CHIP_ID, 0, 15),
+	    [F_CHIP_REV] = REG_FIELD(CHIP_REV, 0, 15),
+	    [F_ONE_CELL_MODE] = REG_FIELD(IC_SET1, 11, 11),
+	    [F_cell] = REG_FIELD(IC_SET1, 1, 1),
+	    [F_VACP_AUTO_DISCHG] = REG_FIELD(IC_SET1, 9, 9),
+	    [F_VACP_LOAD] = REG_FIELD(IC_SET1, 8, 8),
+	    [F_ACOK_POL] = REG_FIELD(IC_SET1, 1, 1),
+	    [F_ACOK_DISEN] = REG_FIELD(IC_SET1, 0, 0),
+	    [F_DEBUG_SET1] = REG_FIELD(IC_SET2, 4, 8),
+	    [F_DEBUG_SET0] = REG_FIELD(IC_SET2, 0, 0),
+	    [F_MONRST_STATE] = REG_FIELD(SYSTEM_STATUS, 6, 6),
+	    [F_ALMRST_STATE] = REG_FIELD(SYSTEM_STATUS, 5, 5),
+	    [F_CHGRST_STATE] = REG_FIELD(SYSTEM_STATUS, 4, 4),
+	    [F_OTPLD_STATE] = REG_FIELD(SYSTEM_STATUS, 1, 1),
+	    [F_ALLRST_STATE] = REG_FIELD(SYSTEM_STATUS, 0, 0),
+	    [F_PROTECT_SET] = REG_FIELD(PROTECT_SET, 0, 15),
+	    [F_MAP_SET] = REG_FIELD(MAP_SET, 0, 15),
+	    [F_ADCINTERVAL] = REG_FIELD(VM_CTRL_SET, 14, 15),
+	    [F_ADCMOD] = REG_FIELD(VM_CTRL_SET, 12, 13),
+	    [F_ADCTMOD] = REG_FIELD(VM_CTRL_SET, 10, 11),
+	    [F_EXTIADPEN] = REG_FIELD(VM_CTRL_SET, 9, 9),
+	    [F_VSYSENB] = REG_FIELD(VM_CTRL_SET, 8, 8),
+	    [F_VCCENB] = REG_FIELD(VM_CTRL_SET, 7, 7),
+	    [F_VBUSENB] = REG_FIELD(VM_CTRL_SET, 6, 6),
+	    [F_VACPENB] = REG_FIELD(VM_CTRL_SET, 5, 5),
+	    [F_IACPENB] = REG_FIELD(VM_CTRL_SET, 4, 4),
+	    [F_THERMENB] = REG_FIELD(VM_CTRL_SET, 3, 3),
+	    [F_VBATENB] = REG_FIELD(VM_CTRL_SET, 2, 2),
+	    [F_IBATMENB] = REG_FIELD(VM_CTRL_SET, 1, 1),
+	    [F_IBATPENB] = REG_FIELD(VM_CTRL_SET, 0, 0),
+	    [F_TMPTHR1B] = REG_FIELD(THERM_WINDOW_SET1, 8, 15),
+	    [F_TMPTHR1A] = REG_FIELD(THERM_WINDOW_SET1, 0, 7),
+	    [F_TMPTHR2B] = REG_FIELD(THERM_WINDOW_SET2, 8, 15),
+	    [F_TMPTHR2A] = REG_FIELD(THERM_WINDOW_SET2, 0, 7),
+	    [F_TMPTHR3B] = REG_FIELD(THERM_WINDOW_SET3, 8, 15),
+	    [F_TMPTHR3A] = REG_FIELD(THERM_WINDOW_SET3, 0, 7),
+	    [F_TMPTHR4B] = REG_FIELD(THERM_WINDOW_SET4, 8, 15),
+	    [F_TMPTHR4A] = REG_FIELD(THERM_WINDOW_SET4, 0, 7),
+	    [F_TMPTHR5B] = REG_FIELD(THERM_WINDOW_SET5, 8, 15),
+	    [F_TMPTHR5A] = REG_FIELD(THERM_WINDOW_SET5, 0, 7),
+	    [F_IBATP_TH_SET] = REG_FIELD(IBATP_TH_SET, 0, 14),
+	    [F_IBATM_TH_SET] = REG_FIELD(IBATM_TH_SET, 0, 14),
+	    [F_VBAT_TH_SET] = REG_FIELD(VBAT_TH_SET, 0, 14),
+	    [F_THERM_TH_SET] = REG_FIELD(THERM_TH_SET, 0, 7),
+	    [F_IACP_TH_SET] = REG_FIELD(IACP_TH_SET, 0, 14),
+	    [F_VACP_TH_SET] = REG_FIELD(VACP_TH_SET, 0, 14),
+	    [F_VBUS_TH_SET] = REG_FIELD(VBUS_TH_SET, 0, 14),
+	    [F_VCC_TH_SET] = REG_FIELD(VCC_TH_SET, 0, 14),
+	    [F_VSYS_TH_SET] = REG_FIELD(VSYS_TH_SET, 0, 14),
+	    [F_EXTIADP_TH_SET] = REG_FIELD(EXTIADP_TH_SET, 0, 11),
+	    [F_IBATP_VAL] = REG_FIELD(IBATP_VAL, 0, 14),
+	    [F_IBATP_AVE_VAL] = REG_FIELD(IBATP_AVE_VAL, 0, 14),
+	    [F_IBATM_VAL] = REG_FIELD(IBATM_VAL, 0, 14),
+	    [F_IBATM_AVE_VAL] = REG_FIELD(IBATM_AVE_VAL, 0, 14),
+	    [F_VBAT_VAL] = REG_FIELD(VBAT_VAL, 0, 14),
+	    [F_VBAT_AVE_VAL] = REG_FIELD(VBAT_AVE_VAL, 0, 14),
+	    [F_THERM_VAL] = REG_FIELD(THERM_VAL, 0, 7),
+	    [F_VTH_VAL] = REG_FIELD(VTH_VAL, 0, 11),
+	    [F_IACP_VAL] = REG_FIELD(IACP_VAL, 0, 14),
+	    [F_IACP_AVE_VAL] = REG_FIELD(IACP_AVE_VAL, 0, 14),
+	    [F_VACP_VAL] = REG_FIELD(VACP_VAL, 0, 14),
+	    [F_VACP_AVE_VAL] = REG_FIELD(VACP_AVE_VAL, 0, 14),
+	    [F_VBUS_VAL] = REG_FIELD(VBUS_VAL, 0, 14),
+	    [F_VBUS_AVE_VAL] = REG_FIELD(VBUS_AVE_VAL, 0, 14),
+	    [F_VCC_VAL] = REG_FIELD(VCC_VAL, 0, 14),
+	    [F_VCC_AVE_VAL] = REG_FIELD(VCC_AVE_VAL, 0, 14),
+	    [F_VSYS_VAL] = REG_FIELD(VSYS_VAL, 0, 14),
+	    [F_VSYS_AVE_VAL] = REG_FIELD(VSYS_AVE_VAL, 0, 14),
+	    [F_EXTIADP_VAL] = REG_FIELD(EXTIADP_VAL, 0, 11),
+	    [F_EXTIADP_AVE_VAL] = REG_FIELD(EXTIADP_AVE_VAL, 0, 11),
+	    [F_VACPCLPS_TH_SET] = REG_FIELD(VACPCLPS_TH_SET, 7, 14),
+	    [F_INT7_SET] = REG_FIELD(INT7_SET, 0, 15),
+	    [F_INT6_SET] = REG_FIELD(INT6_SET, 0, 13),
+	    [F_INT5_SET] = REG_FIELD(INT5_SET, 0, 13),
+	    [F_INT4_SET] = REG_FIELD(INT4_SET, 0, 9),
+	    [F_INT3_SET] = REG_FIELD(INT3_SET, 0, 15),
+	    [F_INT2_SET] = REG_FIELD(INT2_SET, 0, 15),
+	    [F_INT1_SET] = REG_FIELD(INT1_SET, 0, 15),
+	    [F_INT0_SET] = REG_FIELD(INT0_SET, 0, 7),
+	    [F_VBUS_RBUV_DET] = REG_FIELD(INT1_SET, 15, 15),
+	    [F_VBUS_RBUV_RES] = REG_FIELD(INT1_SET, 14, 14),
+	    [F_VBUS_TH_DET] = REG_FIELD(INT1_SET, 9, 9),
+	    [F_VBUS_TH_RES] = REG_FIELD(INT1_SET, 8, 8),
+	    [F_VBUS_IIN_MOD] = REG_FIELD(INT1_SET, 6, 6),
+	    [F_VBUS_OV_DET] = REG_FIELD(INT1_SET, 5, 5),
+	    [F_VBUS_OV_RES] = REG_FIELD(INT1_SET, 4, 4),
+	    [F_VBUS_CLPS_DET] = REG_FIELD(INT1_SET, 3, 3),
+	    [F_VBUS_CLPS] = REG_FIELD(INT1_SET, 2, 2),
+	    [F_VBUS_DET] = REG_FIELD(INT1_SET, 1, 1),
+	    [F_VBUS_RES] = REG_FIELD(INT1_SET, 0, 0),
+	    [F_VCC_RBUV_DET] = REG_FIELD(INT2_SET, 15, 15),
+	    [F_VCC_RBUV_RES] = REG_FIELD(INT2_SET, 14, 14),
+	    [F_VCC_TH_DET] = REG_FIELD(INT2_SET, 9, 9),
+	    [F_VCC_TH_RES] = REG_FIELD(INT2_SET, 8, 8),
+	    [F_VCC_IIN_MOD] = REG_FIELD(INT2_SET, 6, 6),
+	    [F_VCC_OVP_DET] = REG_FIELD(INT2_SET, 5, 5),
+	    [F_VCC_OVP_RES] = REG_FIELD(INT2_SET, 4, 4),
+	    [F_VCC_CLPS_DET] = REG_FIELD(INT2_SET, 3, 3),
+	    [F_VCC_CLPS_RES] = REG_FIELD(INT2_SET, 2, 2),
+	    [F_VCC_DET] = REG_FIELD(INT2_SET, 1, 1),
+	    [F_VCC_RES] = REG_FIELD(INT2_SET, 0, 0),
+	    [F_TH_DET] = REG_FIELD(INT3_SET, 15, 15),
+	    [F_TH_RMV] = REG_FIELD(INT3_SET, 14, 14),
+	    [F_TMP_OUT_DET] = REG_FIELD(INT3_SET, 11, 11),
+	    [F_TMP_OUT_RES] = REG_FIELD(INT3_SET, 10, 10),
+	    [F_VBAT_TH_DET] = REG_FIELD(INT3_SET, 9, 9),
+	    [F_VBAT_TH_RES] = REG_FIELD(INT3_SET, 8, 8),
+	    [F_IBAT_SHORT_DET] = REG_FIELD(INT3_SET, 7, 7),
+	    [F_IBAT_SHORT_RES] = REG_FIELD(INT3_SET, 6, 6),
+	    [F_VBAT_OV_DET] = REG_FIELD(INT3_SET, 5, 5),
+	    [F_VBAT_OV_RES] = REG_FIELD(INT3_SET, 4, 4),
+	    [F_BAT_ASSIST_DET] = REG_FIELD(INT3_SET, 3, 3),
+	    [F_BAT_ASSIST_RES] = REG_FIELD(INT3_SET, 2, 2),
+	    [F_VSYS_TH_DET] = REG_FIELD(INT4_SET, 9, 9),
+	    [F_VSYS_TH_RES] = REG_FIELD(INT4_SET, 8, 8),
+	    [F_VSYS_OV_DET] = REG_FIELD(INT4_SET, 5, 5),
+	    [F_VSYS_OV_RES] = REG_FIELD(INT4_SET, 4, 4),
+	    [F_VSYS_SHT_DET] = REG_FIELD(INT4_SET, 3, 3),
+	    [F_VSYS_SHT_RES] = REG_FIELD(INT4_SET, 2, 2),
+	    [F_VSYS_UV_DET] = REG_FIELD(INT4_SET, 1, 1),
+	    [F_VSYS_UV_RES] = REG_FIELD(INT4_SET, 0, 0),
+	    [F_OTP_LOAD_DONE] = REG_FIELD(INT5_SET, 13, 13),
+	    [F_PWR_ON] = REG_FIELD(INT5_SET, 12, 12),
+	    [F_EXTIADP_TRNS] = REG_FIELD(INT5_SET, 11, 11),
+	    [F_EXTIADP_TH_DET] = REG_FIELD(INT5_SET, 9, 9),
+	    [F_EXIADP_TH_RES] = REG_FIELD(INT5_SET, 8, 8),
+	    [F_BAT_MNT_DET] = REG_FIELD(INT5_SET, 7, 7),
+	    [F_BAT_MNT_RES] = REG_FIELD(INT5_SET, 6, 6),
+	    [F_TSD_DET] = REG_FIELD(INT5_SET, 5, 5),
+	    [F_TSD_RES] = REG_FIELD(INT5_SET, 4, 4),
+	    [F_CHGWDT_EXP] = REG_FIELD(INT5_SET, 3, 3),
+	    [F_THERMWDT_EXP] = REG_FIELD(INT5_SET, 2, 2),
+	    [F_TMP_TRNS] = REG_FIELD(INT5_SET, 1, 1),
+	    [F_CHG_TRNS] = REG_FIELD(INT5_SET, 0, 0),
+	    [F_VBUS_UCD_PORT_DET] = REG_FIELD(INT6_SET, 13, 13),
+	    [F_VBUS_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 12, 12),
+	    [F_VBUS_UCD_URID_RMV] = REG_FIELD(INT6_SET, 11, 11),
+	    [F_VBUS_UCD_OTG_DET] = REG_FIELD(INT6_SET, 10, 10),
+	    [F_VBUS_UCD_URID_MOD] = REG_FIELD(INT6_SET, 8, 8),
+	    [F_VCC_UCD_PORT_DET] = REG_FIELD(INT6_SET, 5, 5),
+	    [F_VCC_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 4, 4),
+	    [F_VCC_UCD_URID_RMV] = REG_FIELD(INT6_SET, 3, 3),
+	    [F_VCC_UCD_OTG_DET] = REG_FIELD(INT6_SET, 2, 2),
+	    [F_VCC_UCD_URID_MOD] = REG_FIELD(INT6_SET, 0, 0),
+	    [F_PROCHOT_DET] = REG_FIELD(INT7_SET, 15, 15),
+	    [F_PROCHOT_RES] = REG_FIELD(INT7_SET, 14, 14),
+	    [F_VACP_DET] = REG_FIELD(INT7_SET, 11, 11),
+	    [F_VACP_RES] = REG_FIELD(INT7_SET, 10, 10),
+	    [F_VACP_TH_DET] = REG_FIELD(INT7_SET, 9, 9),
+	    [F_VACP_TH_RES] = REG_FIELD(INT7_SET, 8, 8),
+	    [F_IACP_TH_DET] = REG_FIELD(INT7_SET, 7, 7),
+	    [F_IACP_THE_RES] = REG_FIELD(INT7_SET, 6, 6),
+	    [F_THERM_TH_DET] = REG_FIELD(INT7_SET, 5, 5),
+	    [F_THERM_TH_RES] = REG_FIELD(INT7_SET, 4, 4),
+	    [F_IBATM_TH_DET] = REG_FIELD(INT7_SET, 3, 3),
+	    [F_IBATM_TH_RES] = REG_FIELD(INT7_SET, 2, 2),
+	    [F_IBATP_TH_DET] = REG_FIELD(INT7_SET, 1, 1),
+	    [F_IBATP_TH_RES] = REG_FIELD(INT7_SET, 0, 0),
+	    [F_INT7_STATUS] = REG_FIELD(INT7_STATUS, 0, 15),
+	    [F_INT6_STATUS] = REG_FIELD(INT6_STATUS, 0, 13),
+	    [F_INT5_STATUS] = REG_FIELD(INT5_STATUS, 0, 13),
+	    [F_INT4_STATUS] = REG_FIELD(INT4_STATUS, 0, 9),
+	    [F_INT3_STATUS] = REG_FIELD(INT3_STATUS, 0, 15),
+	    [F_INT2_STATUS] = REG_FIELD(INT2_STATUS, 0, 15),
+	    [F_INT1_STATUS] = REG_FIELD(INT1_STATUS, 0, 15),
+	    [F_INT0_STATUS] = REG_FIELD(INT0_STATUS, 0, 7),
+	    [F_ILIM_DECREASE] = REG_FIELD(OTPREG0, 0, 15),
+	    [F_RESERVE_OTPREG1] = REG_FIELD(OTPREG1, 0, 15),
+	    [F_POWER_SAVE_MODE] = REG_FIELD(SMBREG, 0, 15),
+	    [F_DEBUG_MODE_SET] = REG_FIELD(DEBUG_MODE_SET, 0, 15),
+	    [F_DEBUG0x14] = REG_FIELD(DEBUG0x14, 0, 15),
+	    [F_DEBUG0x1A] = REG_FIELD(DEBUG0x1A, 0, 15),
+};
+
+/* CHGSTM_STATEs */
+#define CHGSTM_SUSPEND 0x00
+#define CHGSTM_TRICKLE_CHARGE 0x01
+#define CHGSTM_PRE_CHARGE 0x02
+#define CHGSTM_FAST_CHARGE 0x03
+#define CHGSTM_TOP_OFF 0x04
+#define CHGSTM_DONE 0x05
+#define CHGSTM_OTG 0x08
+#define CHGSTM_OTG_DONE 0x09
+#define CHGSTM_TEMPERATURE_ERROR_1 0x10
+#define CHGSTM_TEMPERATURE_ERROR_2 0x11
+#define CHGSTM_TEMPERATURE_ERROR_3 0x12
+#define CHGSTM_TEMPERATURE_ERROR_4 0x13
+#define CHGSTM_TEMPERATURE_ERROR_5 0x14
+#define CHGSTM_TEMPERATURE_ERROR_6 0x15
+#define CHGSTM_TEMPERATURE_ERROR_7 0x18
+#define CHGSTM_THERMAL_SHUT_DOWN_1 0x20
+#define CHGSTM_THERMAL_SHUT_DOWN_2 0x21
+#define CHGSTM_THERMAL_SHUT_DOWN_3 0x22
+#define CHGSTM_THERMAL_SHUT_DOWN_4 0x23
+#define CHGSTM_THERMAL_SHUT_DOWN_5 0x24
+#define CHGSTM_THERMAL_SHUT_DOWN_6 0x25
+#define CHGSTM_THERMAL_SHUT_DOWN_7 0x28
+#define CHGSTM_BATTERY_ERROR 0x40
+
+/* VBAT_VSYS_STATUS */
+#define STATUS_VSYS_OV BIT(15)
+#define STATUS_VSYS_SSD BIT(14)
+#define STATUS_VSYS_SCP BIT(13)
+#define STATUS_VSYS_UVN BIT(12)
+#define STATUS_IBAT_SHORT BIT(6)
+#define STATUS_VBAT_OV BIT(3)
+#define STATUS_DEAD_BAT BIT(0)
+
+/* VBUS_VCC_STATUS */
+#define STATUS_VACP_DET BIT(12)
+#define STATUS_VCC_OVP BIT(11)
+#define STATUS_ILIM_VCC_MOD BIT(10)
+#define STATUS_VCC_CLPS BIT(9)
+#define STATUS_VCC_DET BIT(8)
+#define STATUS_VBUS_OVP BIT(3)
+#define STATUS_ILIM_VBUS_MOD BIT(2)
+#define STATUS_VBUS_CLPS BIT(1)
+#define STATUS_VBUS_DET BIT(0)
+
+/* Interrupt set/status definitions */
+
+/* INT 0 */
+#define INT0_INT7_STATUS BIT(7)
+#define INT0_INT6_STATUS BIT(6)
+#define INT0_INT5_STATUS BIT(5)
+#define INT0_INT4_STATUS BIT(4)
+#define INT0_INT3_STATUS BIT(3)
+#define INT0_INT2_STATUS BIT(2)
+#define INT0_INT1_STATUS BIT(1)
+#define INT0_INT0_STATUS BIT(0)
+#define INT0_ALL 0xff
+
+/* INT 1 */
+#define VBUS_RBUV_DET BIT(15)
+#define VBUS_RBUV_RES BIT(14)
+#define VBUS_TH_DET BIT(9)
+#define VBUS_TH_RES BIT(8)
+#define VBUS_IIN_MOD BIT(6)
+#define VBUS_OV_DET BIT(5)
+#define VBUS_OV_RES BIT(4)
+#define VBUS_CLPS_DET BIT(3)
+#define VBUS_CLPS BIT(2)
+#define VBUS_DET BIT(1)
+#define VBUS_RES BIT(0)
+#define INT1_ALL (VBUS_RBUV_DET|\
+		 VBUS_RBUV_RES|\
+		 VBUS_TH_DET |\
+		 VBUS_TH_RES |\
+		 VBUS_IIN_MOD|\
+		 VBUS_OV_DET |\
+		 VBUS_OV_RES |\
+		 VBUS_CLPS_DET |\
+		 VBUS_CLPS |\
+		 VBUS_DET |\
+		 VBUS_RES)
+
+/* INT 2 */
+#define VCC_RBUV_DET BIT(15)
+#define VCC_RBUV_RES BIT(14)
+#define VCC_TH_DET BIT(9)
+#define VCC_TH_RES BIT(8)
+#define VCC_IIN_MOD BIT(6)
+#define VCC_OVP_DET BIT(5)
+#define VCC_OVP_RES BIT(4)
+#define VCC_CLPS_DET BIT(3)
+#define VCC_CLPS_RES BIT(2)
+#define VCC_DET BIT(1)
+#define VCC_RES BIT(0)
+#define INT2_ALL (VCC_RBUV_DET |\
+		 VCC_RBUV_RES |\
+		 VCC_TH_DET |\
+		 VCC_TH_RES |\
+		 VCC_IIN_MOD |\
+		 VCC_OVP_DET |\
+		 VCC_OVP_RES |\
+		 VCC_CLPS_DET |\
+		 VCC_CLPS_RES |\
+		 VCC_DET |\
+		 VCC_RES)
+/* INT 3 */
+#define TH_DET BIT(15)
+#define TH_RMV BIT(14)
+#define TMP_OUT_DET BIT(11)
+#define TMP_OUT_RES BIT(10)
+#define VBAT_TH_DET BIT(9)
+#define VBAT_TH_RES BIT(8)
+#define IBAT_SHORT_DET BIT(7)
+#define IBAT_SHORT_RES BIT(6)
+#define VBAT_OV_DET BIT(5)
+#define VBAT_OV_RES BIT(4)
+#define BAT_ASSIST_DET BIT(3)
+#define BAT_ASSIST_RES BIT(2)
+#define INT3_ALL (TH_DET |\
+		 TH_RMV |\
+		 TMP_OUT_DET |\
+		 TMP_OUT_RES |\
+		 VBAT_TH_DET |\
+		 VBAT_TH_RES |\
+		 IBAT_SHORT_DET |\
+		 IBAT_SHORT_RES |\
+		 VBAT_OV_DET |\
+		 VBAT_OV_RES |\
+		 BAT_ASSIST_DET |\
+		 BAT_ASSIST_RES)
+
+/* INT 4 */
+#define VSYS_TH_DET BIT(9)
+#define VSYS_TH_RES BIT(8)
+#define VSYS_OV_DET BIT(5)
+#define VSYS_OV_RES BIT(4)
+#define VSYS_SHT_DET BIT(3)
+#define VSYS_SHT_RES BIT(2)
+#define VSYS_UV_DET BIT(1)
+#define VSYS_UV_RES BIT(0)
+#define INT4_ALL (VSYS_TH_DET |\
+		 VSYS_TH_RES |\
+		 VSYS_OV_DET |\
+		 VSYS_OV_RES |\
+		 VSYS_SHT_DET |\
+		 VSYS_SHT_RES |\
+		 VSYS_UV_DET |\
+		 VSYS_UV_RES)
+
+/* INT 5*/
+#define OTP_LOAD_DONE BIT(13)
+#define PWR_ON BIT(12)
+#define EXTIADP_TRNS BIT(11)
+#define EXTIADP_TH_DET BIT(9)
+#define EXIADP_TH_RES BIT(8)
+#define BAT_MNT_DET BIT(7)
+#define BAT_MNT_RES BIT(6)
+#define TSD_DET BIT(5)
+#define TSD_RES BIT(4)
+#define CHGWDT_EXP BIT(3)
+#define THERMWDT_EXP BIT(2)
+#define TMP_TRNS BIT(1)
+#define CHG_TRNS BIT(0)
+#define INT5_ALL (OTP_LOAD_DONE |\
+		 PWR_ON |\
+		 EXTIADP_TRNS |\
+		 EXTIADP_TH_DET |\
+		 EXIADP_TH_RES |\
+		 BAT_MNT_DET |\
+		 BAT_MNT_RES |\
+		 TSD_DET |\
+		 TSD_RES |\
+		 CHGWDT_EXP |\
+		 THERMWDT_EXP |\
+		 TMP_TRNS |\
+		 CHG_TRNS)
+
+/* INT 6*/
+#define VBUS_UCD_PORT_DET BIT(13)
+#define VBUS_UCD_UCHG_DET BIT(12)
+#define VBUS_UCD_URID_RMV BIT(11)
+#define VBUS_UCD_OTG_DET BIT(10)
+#define VBUS_UCD_URID_MOD BIT(8)
+#define VCC_UCD_PORT_DET BIT(5)
+#define VCC_UCD_UCHG_DET BIT(4)
+#define VCC_UCD_URID_RMV BIT(3)
+#define VCC_UCD_OTG_DET BIT(2)
+#define VCC_UCD_URID_MOD BIT(0)
+#define INT6_ALL (VBUS_UCD_PORT_DET |\
+		 VBUS_UCD_UCHG_DET |\
+		 VBUS_UCD_URID_RMV |\
+		 VBUS_UCD_OTG_DET |\
+		 VBUS_UCD_URID_MOD |\
+		 VCC_UCD_PORT_DET |\
+		 VCC_UCD_UCHG_DET |\
+		 VCC_UCD_URID_RMV |\
+		 VCC_UCD_OTG_DET |\
+		 VCC_UCD_URID_MOD)
+
+/* INT 7 */
+#define PROCHOT_DET BIT(15)
+#define PROCHOT_RES BIT(14)
+#define VACP_DET BIT(11)
+#define VACP_RES BIT(10)
+#define VACP_TH_DET BIT(9)
+#define VACP_TH_RES BIT(8)
+#define IACP_TH_DET BIT(7)
+#define IACP_THE_RES BIT(6)
+#define THERM_TH_DET BIT(5)
+#define THERM_TH_RES BIT(4)
+#define IBATM_TH_DET BIT(3)
+#define IBATM_TH_RES BIT(2)
+#define IBATP_TH_DET BIT(1)
+#define IBATP_TH_RES BIT(0)
+#define INT7_ALL (PROCHOT_DET |\
+		 PROCHOT_RES |\
+		 VACP_DET |\
+		 VACP_RES |\
+		 VACP_TH_DET |\
+		 VACP_TH_RES |\
+		 IACP_TH_DET |\
+		 IACP_THE_RES |\
+		 THERM_TH_DET |\
+		 THERM_TH_RES |\
+		 IBATM_TH_DET |\
+		 IBATM_TH_RES |\
+		 IBATP_TH_DET |\
+		 IBATP_TH_RES)
+
+/* SYSTEM_CTRL_SET*/
+#define MONRST BIT(6)
+#define ALMRST BIT(5)
+#define CHGRST BIT(4)
+#define OTPLD  BIT(1)
+#define ALLRST BIT(0)
+
+/* F_BATTEMP */
+#define ROOM		0x0
+#define HOT1		0x1
+#define HOT2		0x2
+#define HOT3		0x3
+#define COLD1		0x4
+#define COLD2		0x5
+#define TEMP_DIS	0x6
+#define BATT_OPEN	0x7
+
+#endif
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
new file mode 100644
index 000000000..6b99e1c67
--- /dev/null
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -0,0 +1,1791 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * bq2415x charger driver
+ *
+ * Copyright (C) 2011-2013  Pali Rohár <pali@kernel.org>
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq24150
+ * https://www.ti.com/product/bq24150a
+ * https://www.ti.com/product/bq24152
+ * https://www.ti.com/product/bq24153
+ * https://www.ti.com/product/bq24153a
+ * https://www.ti.com/product/bq24155
+ * https://www.ti.com/product/bq24157s
+ * https://www.ti.com/product/bq24158
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+#include <linux/power/bq2415x_charger.h>
+
+/* timeout for resetting chip timer */
+#define BQ2415X_TIMER_TIMEOUT		10
+
+#define BQ2415X_REG_STATUS		0x00
+#define BQ2415X_REG_CONTROL		0x01
+#define BQ2415X_REG_VOLTAGE		0x02
+#define BQ2415X_REG_VENDER		0x03
+#define BQ2415X_REG_CURRENT		0x04
+
+/* reset state for all registers */
+#define BQ2415X_RESET_STATUS		BIT(6)
+#define BQ2415X_RESET_CONTROL		(BIT(4)|BIT(5))
+#define BQ2415X_RESET_VOLTAGE		(BIT(1)|BIT(3))
+#define BQ2415X_RESET_CURRENT		(BIT(0)|BIT(3)|BIT(7))
+
+/* status register */
+#define BQ2415X_BIT_TMR_RST		7
+#define BQ2415X_BIT_OTG			7
+#define BQ2415X_BIT_EN_STAT		6
+#define BQ2415X_MASK_STAT		(BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_STAT		4
+#define BQ2415X_BIT_BOOST		3
+#define BQ2415X_MASK_FAULT		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_FAULT		0
+
+/* control register */
+#define BQ2415X_MASK_LIMIT		(BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_LIMIT		6
+#define BQ2415X_MASK_VLOWV		(BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_VLOWV		4
+#define BQ2415X_BIT_TE			3
+#define BQ2415X_BIT_CE			2
+#define BQ2415X_BIT_HZ_MODE		1
+#define BQ2415X_BIT_OPA_MODE		0
+
+/* voltage register */
+#define BQ2415X_MASK_VO		(BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VO		2
+#define BQ2415X_BIT_OTG_PL		1
+#define BQ2415X_BIT_OTG_EN		0
+
+/* vender register */
+#define BQ2415X_MASK_VENDER		(BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VENDER		5
+#define BQ2415X_MASK_PN			(BIT(3)|BIT(4))
+#define BQ2415X_SHIFT_PN		3
+#define BQ2415X_MASK_REVISION		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_REVISION		0
+
+/* current register */
+#define BQ2415X_MASK_RESET		BIT(7)
+#define BQ2415X_MASK_VI_CHRG		(BIT(4)|BIT(5)|BIT(6))
+#define BQ2415X_SHIFT_VI_CHRG		4
+/* N/A					BIT(3) */
+#define BQ2415X_MASK_VI_TERM		(BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_VI_TERM		0
+
+
+enum bq2415x_command {
+	BQ2415X_TIMER_RESET,
+	BQ2415X_OTG_STATUS,
+	BQ2415X_STAT_PIN_STATUS,
+	BQ2415X_STAT_PIN_ENABLE,
+	BQ2415X_STAT_PIN_DISABLE,
+	BQ2415X_CHARGE_STATUS,
+	BQ2415X_BOOST_STATUS,
+	BQ2415X_FAULT_STATUS,
+
+	BQ2415X_CHARGE_TERMINATION_STATUS,
+	BQ2415X_CHARGE_TERMINATION_ENABLE,
+	BQ2415X_CHARGE_TERMINATION_DISABLE,
+	BQ2415X_CHARGER_STATUS,
+	BQ2415X_CHARGER_ENABLE,
+	BQ2415X_CHARGER_DISABLE,
+	BQ2415X_HIGH_IMPEDANCE_STATUS,
+	BQ2415X_HIGH_IMPEDANCE_ENABLE,
+	BQ2415X_HIGH_IMPEDANCE_DISABLE,
+	BQ2415X_BOOST_MODE_STATUS,
+	BQ2415X_BOOST_MODE_ENABLE,
+	BQ2415X_BOOST_MODE_DISABLE,
+
+	BQ2415X_OTG_LEVEL,
+	BQ2415X_OTG_ACTIVATE_HIGH,
+	BQ2415X_OTG_ACTIVATE_LOW,
+	BQ2415X_OTG_PIN_STATUS,
+	BQ2415X_OTG_PIN_ENABLE,
+	BQ2415X_OTG_PIN_DISABLE,
+
+	BQ2415X_VENDER_CODE,
+	BQ2415X_PART_NUMBER,
+	BQ2415X_REVISION,
+};
+
+enum bq2415x_chip {
+	BQUNKNOWN,
+	BQ24150,
+	BQ24150A,
+	BQ24151,
+	BQ24151A,
+	BQ24152,
+	BQ24153,
+	BQ24153A,
+	BQ24155,
+	BQ24156,
+	BQ24156A,
+	BQ24157S,
+	BQ24158,
+};
+
+static char *bq2415x_chip_name[] = {
+	"unknown",
+	"bq24150",
+	"bq24150a",
+	"bq24151",
+	"bq24151a",
+	"bq24152",
+	"bq24153",
+	"bq24153a",
+	"bq24155",
+	"bq24156",
+	"bq24156a",
+	"bq24157s",
+	"bq24158",
+};
+
+struct bq2415x_device {
+	struct device *dev;
+	struct bq2415x_platform_data init_data;
+	struct power_supply *charger;
+	struct power_supply_desc charger_desc;
+	struct delayed_work work;
+	struct device_node *notify_node;
+	struct notifier_block nb;
+	enum bq2415x_mode reported_mode;/* mode reported by hook function */
+	enum bq2415x_mode mode;		/* currently configured mode */
+	enum bq2415x_chip chip;
+	const char *timer_error;
+	char *model;
+	char *name;
+	int autotimer;	/* 1 - if driver automatically reset timer, 0 - not */
+	int automode;	/* 1 - enabled, 0 - disabled; -1 - not supported */
+	int id;
+};
+
+/* each registered chip must have unique id */
+static DEFINE_IDR(bq2415x_id);
+
+static DEFINE_MUTEX(bq2415x_id_mutex);
+static DEFINE_MUTEX(bq2415x_timer_mutex);
+static DEFINE_MUTEX(bq2415x_i2c_mutex);
+
+/**** i2c read functions ****/
+
+/* read value from register */
+static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	struct i2c_msg msg[2];
+	u8 val;
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = &reg;
+	msg[0].len = sizeof(reg);
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = &val;
+	msg[1].len = sizeof(val);
+
+	mutex_lock(&bq2415x_i2c_mutex);
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&bq2415x_i2c_mutex);
+
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+/* read value from register, apply mask and right shift it */
+static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg,
+				 u8 mask, u8 shift)
+{
+	int ret;
+
+	if (shift > 8)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read(bq, reg);
+	if (ret < 0)
+		return ret;
+	return (ret & mask) >> shift;
+}
+
+/* read value from register and return one specified bit */
+static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit)
+{
+	if (bit > 8)
+		return -EINVAL;
+	return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit);
+}
+
+/**** i2c write functions ****/
+
+/* write value to register */
+static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	struct i2c_msg msg[1];
+	u8 data[2];
+	int ret;
+
+	data[0] = reg;
+	data[1] = val;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = data;
+	msg[0].len = ARRAY_SIZE(data);
+
+	mutex_lock(&bq2415x_i2c_mutex);
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&bq2415x_i2c_mutex);
+
+	/* i2c_transfer returns number of messages transferred */
+	if (ret < 0)
+		return ret;
+	else if (ret != 1)
+		return -EIO;
+
+	return 0;
+}
+
+/* read value from register, change it with mask left shifted and write back */
+static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val,
+				  u8 mask, u8 shift)
+{
+	int ret;
+
+	if (shift > 8)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read(bq, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~mask;
+	ret |= val << shift;
+
+	return bq2415x_i2c_write(bq, reg, ret);
+}
+
+/* change only one bit in register */
+static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg,
+				 bool val, u8 bit)
+{
+	if (bit > 8)
+		return -EINVAL;
+	return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit);
+}
+
+/**** global functions ****/
+
+/* exec command function */
+static int bq2415x_exec_command(struct bq2415x_device *bq,
+				enum bq2415x_command command)
+{
+	int ret;
+
+	switch (command) {
+	case BQ2415X_TIMER_RESET:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS,
+				1, BQ2415X_BIT_TMR_RST);
+	case BQ2415X_OTG_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_OTG);
+	case BQ2415X_STAT_PIN_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_STAT_PIN_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_STAT_PIN_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0,
+				BQ2415X_BIT_EN_STAT);
+	case BQ2415X_CHARGE_STATUS:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+				BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT);
+	case BQ2415X_BOOST_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+				BQ2415X_BIT_BOOST);
+	case BQ2415X_FAULT_STATUS:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+			BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT);
+
+	case BQ2415X_CHARGE_TERMINATION_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_TE);
+	case BQ2415X_CHARGE_TERMINATION_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_TE);
+	case BQ2415X_CHARGE_TERMINATION_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_TE);
+	case BQ2415X_CHARGER_STATUS:
+		ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_BIT_CE);
+		if (ret < 0)
+			return ret;
+		return ret > 0 ? 0 : 1;
+	case BQ2415X_CHARGER_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_CE);
+	case BQ2415X_CHARGER_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_CE);
+	case BQ2415X_HIGH_IMPEDANCE_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_HIGH_IMPEDANCE_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_HIGH_IMPEDANCE_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_HZ_MODE);
+	case BQ2415X_BOOST_MODE_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+				BQ2415X_BIT_OPA_MODE);
+	case BQ2415X_BOOST_MODE_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				1, BQ2415X_BIT_OPA_MODE);
+	case BQ2415X_BOOST_MODE_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+				0, BQ2415X_BIT_OPA_MODE);
+
+	case BQ2415X_OTG_LEVEL:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+				BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_ACTIVATE_HIGH:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				1, BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_ACTIVATE_LOW:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				0, BQ2415X_BIT_OTG_PL);
+	case BQ2415X_OTG_PIN_STATUS:
+		return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+				BQ2415X_BIT_OTG_EN);
+	case BQ2415X_OTG_PIN_ENABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				1, BQ2415X_BIT_OTG_EN);
+	case BQ2415X_OTG_PIN_DISABLE:
+		return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+				0, BQ2415X_BIT_OTG_EN);
+
+	case BQ2415X_VENDER_CODE:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+			BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER);
+	case BQ2415X_PART_NUMBER:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+				BQ2415X_MASK_PN, BQ2415X_SHIFT_PN);
+	case BQ2415X_REVISION:
+		return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+			BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION);
+	}
+	return -EINVAL;
+}
+
+/* detect chip type */
+static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq)
+{
+	struct i2c_client *client = to_i2c_client(bq->dev);
+	int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER);
+
+	if (ret < 0)
+		return ret;
+
+	switch (client->addr) {
+	case 0x6b:
+		switch (ret) {
+		case 0:
+			if (bq->chip == BQ24151A)
+				return bq->chip;
+			return BQ24151;
+		case 1:
+			if (bq->chip == BQ24150A ||
+				bq->chip == BQ24152 ||
+				bq->chip == BQ24155)
+				return bq->chip;
+			return BQ24150;
+		case 2:
+			if (bq->chip == BQ24153A)
+				return bq->chip;
+			return BQ24153;
+		default:
+			return BQUNKNOWN;
+		}
+		break;
+
+	case 0x6a:
+		switch (ret) {
+		case 0:
+			if (bq->chip == BQ24156A)
+				return bq->chip;
+			return BQ24156;
+		case 2:
+			if (bq->chip == BQ24157S)
+				return bq->chip;
+			return BQ24158;
+		default:
+			return BQUNKNOWN;
+		}
+		break;
+	}
+
+	return BQUNKNOWN;
+}
+
+/* detect chip revision */
+static int bq2415x_detect_revision(struct bq2415x_device *bq)
+{
+	int ret = bq2415x_exec_command(bq, BQ2415X_REVISION);
+	int chip = bq2415x_detect_chip(bq);
+
+	if (ret < 0 || chip < 0)
+		return -1;
+
+	switch (chip) {
+	case BQ24150:
+	case BQ24150A:
+	case BQ24151:
+	case BQ24151A:
+	case BQ24152:
+		if (ret >= 0 && ret <= 3)
+			return ret;
+		return -1;
+	case BQ24153:
+	case BQ24153A:
+	case BQ24156:
+	case BQ24156A:
+	case BQ24157S:
+	case BQ24158:
+		if (ret == 3)
+			return 0;
+		else if (ret == 1)
+			return 1;
+		return -1;
+	case BQ24155:
+		if (ret == 3)
+			return 3;
+		return -1;
+	case BQUNKNOWN:
+		return -1;
+	}
+
+	return -1;
+}
+
+/* return chip vender code */
+static int bq2415x_get_vender_code(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE);
+	if (ret < 0)
+		return 0;
+
+	/* convert to binary */
+	return (ret & 0x1) +
+	       ((ret >> 1) & 0x1) * 10 +
+	       ((ret >> 2) & 0x1) * 100;
+}
+
+/* reset all chip registers to default state */
+static void bq2415x_reset_chip(struct bq2415x_device *bq)
+{
+	bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT);
+	bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE);
+	bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL);
+	bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS);
+	bq->timer_error = NULL;
+}
+
+/**** properties functions ****/
+
+/* set current limit in mA */
+static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (mA <= 100)
+		val = 0;
+	else if (mA <= 500)
+		val = 1;
+	else if (mA <= 800)
+		val = 2;
+	else
+		val = 3;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+			BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+}
+
+/* get current limit in mA */
+static int bq2415x_get_current_limit(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+	if (ret < 0)
+		return ret;
+	else if (ret == 0)
+		return 100;
+	else if (ret == 1)
+		return 500;
+	else if (ret == 2)
+		return 800;
+	else if (ret == 3)
+		return 1800;
+	return -EINVAL;
+}
+
+/* set weak battery voltage in mV */
+static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
+{
+	int val;
+
+	/* round to 100mV */
+	if (mV <= 3400 + 50)
+		val = 0;
+	else if (mV <= 3500 + 50)
+		val = 1;
+	else if (mV <= 3600 + 50)
+		val = 2;
+	else
+		val = 3;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+			BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+}
+
+/* get weak battery voltage in mV */
+static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq)
+{
+	int ret;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+			BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+	if (ret < 0)
+		return ret;
+	return 100 * (34 + ret);
+}
+
+/* set battery regulation voltage in mV */
+static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
+						  int mV)
+{
+	int val = (mV/10 - 350) / 2;
+
+	/*
+	 * According to datasheet, maximum battery regulation voltage is
+	 * 4440mV which is b101111 = 47.
+	 */
+	if (val < 0)
+		val = 0;
+	else if (val > 47)
+		return -EINVAL;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
+			BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+}
+
+/* get battery regulation voltage in mV */
+static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq)
+{
+	int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE,
+			BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+
+	if (ret < 0)
+		return ret;
+	return 10 * (350 + 2*ret);
+}
+
+/* set charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
+	if (val < 0)
+		val = 0;
+	else if (val > 7)
+		val = 7;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+			BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET,
+			BQ2415X_SHIFT_VI_CHRG);
+}
+
+/* get charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_charge_current(struct bq2415x_device *bq)
+{
+	int ret;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+			BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
+	if (ret < 0)
+		return ret;
+	return (37400 + 6800*ret) / bq->init_data.resistor_sense;
+}
+
+/* set termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
+{
+	int val;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
+	if (val < 0)
+		val = 0;
+	else if (val > 7)
+		val = 7;
+
+	return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+			BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET,
+			BQ2415X_SHIFT_VI_TERM);
+}
+
+/* get termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_termination_current(struct bq2415x_device *bq)
+{
+	int ret;
+
+	if (bq->init_data.resistor_sense <= 0)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+			BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
+	if (ret < 0)
+		return ret;
+	return (3400 + 3400*ret) / bq->init_data.resistor_sense;
+}
+
+/* set default value of property */
+#define bq2415x_set_default_value(bq, prop) \
+	do { \
+		int ret = 0; \
+		if (bq->init_data.prop != -1) \
+			ret = bq2415x_set_##prop(bq, bq->init_data.prop); \
+		if (ret < 0) \
+			return ret; \
+	} while (0)
+
+/* set default values of all properties */
+static int bq2415x_set_defaults(struct bq2415x_device *bq)
+{
+	bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+	bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+	bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE);
+
+	bq2415x_set_default_value(bq, current_limit);
+	bq2415x_set_default_value(bq, weak_battery_voltage);
+	bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+	if (bq->init_data.resistor_sense > 0) {
+		bq2415x_set_default_value(bq, charge_current);
+		bq2415x_set_default_value(bq, termination_current);
+		bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE);
+	}
+
+	bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+	return 0;
+}
+
+/**** charger mode functions ****/
+
+/* set charger mode */
+static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
+{
+	int ret = 0;
+	int charger = 0;
+	int boost = 0;
+
+	if (mode == BQ2415X_MODE_BOOST)
+		boost = 1;
+	else if (mode != BQ2415X_MODE_OFF)
+		charger = 1;
+
+	if (!charger)
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+
+	if (!boost)
+		ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+
+	if (ret < 0)
+		return ret;
+
+	switch (mode) {
+	case BQ2415X_MODE_OFF:
+		dev_dbg(bq->dev, "changing mode to: Offline\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	case BQ2415X_MODE_NONE:
+		dev_dbg(bq->dev, "changing mode to: N/A\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	case BQ2415X_MODE_HOST_CHARGER:
+		dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
+		ret = bq2415x_set_current_limit(bq, 500);
+		break;
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
+		ret = bq2415x_set_current_limit(bq, 1800);
+		break;
+	case BQ2415X_MODE_BOOST: /* Boost mode */
+		dev_dbg(bq->dev, "changing mode to: Boost\n");
+		ret = bq2415x_set_current_limit(bq, 100);
+		break;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	if (charger)
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+	else if (boost)
+		ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE);
+
+	if (ret < 0)
+		return ret;
+
+	bq2415x_set_default_value(bq, weak_battery_voltage);
+	bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+	bq->mode = mode;
+	sysfs_notify(&bq->charger->dev.kobj, NULL, "mode");
+
+	return 0;
+
+}
+
+static bool bq2415x_update_reported_mode(struct bq2415x_device *bq, int mA)
+{
+	enum bq2415x_mode mode;
+
+	if (mA == 0)
+		mode = BQ2415X_MODE_OFF;
+	else if (mA < 500)
+		mode = BQ2415X_MODE_NONE;
+	else if (mA < 1800)
+		mode = BQ2415X_MODE_HOST_CHARGER;
+	else
+		mode = BQ2415X_MODE_DEDICATED_CHARGER;
+
+	if (bq->reported_mode == mode)
+		return false;
+
+	bq->reported_mode = mode;
+	return true;
+}
+
+static int bq2415x_notifier_call(struct notifier_block *nb,
+		unsigned long val, void *v)
+{
+	struct bq2415x_device *bq =
+		container_of(nb, struct bq2415x_device, nb);
+	struct power_supply *psy = v;
+	union power_supply_propval prop;
+	int ret;
+
+	if (val != PSY_EVENT_PROP_CHANGED)
+		return NOTIFY_OK;
+
+	/* Ignore event if it was not send by notify_node/notify_device */
+	if (bq->notify_node) {
+		if (!psy->dev.parent ||
+		    psy->dev.parent->of_node != bq->notify_node)
+			return NOTIFY_OK;
+	} else if (bq->init_data.notify_device) {
+		if (strcmp(psy->desc->name, bq->init_data.notify_device) != 0)
+			return NOTIFY_OK;
+	}
+
+	dev_dbg(bq->dev, "notifier call was called\n");
+
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX,
+			&prop);
+	if (ret != 0)
+		return NOTIFY_OK;
+
+	if (!bq2415x_update_reported_mode(bq, prop.intval))
+		return NOTIFY_OK;
+
+	/* if automode is not enabled do not tell about reported_mode */
+	if (bq->automode < 1)
+		return NOTIFY_OK;
+
+	schedule_delayed_work(&bq->work, 0);
+
+	return NOTIFY_OK;
+}
+
+/**** timer functions ****/
+
+/* enable/disable auto resetting chip timer */
+static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state)
+{
+	mutex_lock(&bq2415x_timer_mutex);
+
+	if (bq->autotimer == state) {
+		mutex_unlock(&bq2415x_timer_mutex);
+		return;
+	}
+
+	bq->autotimer = state;
+
+	if (state) {
+		schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+		bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+		bq->timer_error = NULL;
+	} else {
+		cancel_delayed_work_sync(&bq->work);
+	}
+
+	mutex_unlock(&bq2415x_timer_mutex);
+}
+
+/* called by bq2415x_timer_work on timer error */
+static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
+{
+	bq->timer_error = msg;
+	sysfs_notify(&bq->charger->dev.kobj, NULL, "timer");
+	dev_err(bq->dev, "%s\n", msg);
+	if (bq->automode > 0)
+		bq->automode = 0;
+	bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
+	bq2415x_set_autotimer(bq, 0);
+}
+
+/* delayed work function for auto resetting chip timer */
+static void bq2415x_timer_work(struct work_struct *work)
+{
+	struct bq2415x_device *bq = container_of(work, struct bq2415x_device,
+						 work.work);
+	int ret;
+	int error;
+	int boost;
+
+	if (bq->automode > 0 && (bq->reported_mode != bq->mode)) {
+		sysfs_notify(&bq->charger->dev.kobj, NULL, "reported_mode");
+		bq2415x_set_mode(bq, bq->reported_mode);
+	}
+
+	if (!bq->autotimer)
+		return;
+
+	ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+	if (ret < 0) {
+		bq2415x_timer_error(bq, "Resetting timer failed");
+		return;
+	}
+
+	boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
+	if (boost < 0) {
+		bq2415x_timer_error(bq, "Unknown error");
+		return;
+	}
+
+	error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
+	if (error < 0) {
+		bq2415x_timer_error(bq, "Unknown error");
+		return;
+	}
+
+	if (boost) {
+		switch (error) {
+		/* Non fatal errors, chip is OK */
+		case 0: /* No error */
+			break;
+		case 6: /* Timer expired */
+			dev_err(bq->dev, "Timer expired\n");
+			break;
+		case 3: /* Battery voltage too low */
+			dev_err(bq->dev, "Battery voltage to low\n");
+			break;
+
+		/* Fatal errors, disable and reset chip */
+		case 1: /* Overvoltage protection (chip fried) */
+			bq2415x_timer_error(bq,
+				"Overvoltage protection (chip fried)");
+			return;
+		case 2: /* Overload */
+			bq2415x_timer_error(bq, "Overload");
+			return;
+		case 4: /* Battery overvoltage protection */
+			bq2415x_timer_error(bq,
+				"Battery overvoltage protection");
+			return;
+		case 5: /* Thermal shutdown (too hot) */
+			bq2415x_timer_error(bq,
+					"Thermal shutdown (too hot)");
+			return;
+		case 7: /* N/A */
+			bq2415x_timer_error(bq, "Unknown error");
+			return;
+		}
+	} else {
+		switch (error) {
+		/* Non fatal errors, chip is OK */
+		case 0: /* No error */
+			break;
+		case 2: /* Sleep mode */
+			dev_err(bq->dev, "Sleep mode\n");
+			break;
+		case 3: /* Poor input source */
+			dev_err(bq->dev, "Poor input source\n");
+			break;
+		case 6: /* Timer expired */
+			dev_err(bq->dev, "Timer expired\n");
+			break;
+		case 7: /* No battery */
+			dev_err(bq->dev, "No battery\n");
+			break;
+
+		/* Fatal errors, disable and reset chip */
+		case 1: /* Overvoltage protection (chip fried) */
+			bq2415x_timer_error(bq,
+				"Overvoltage protection (chip fried)");
+			return;
+		case 4: /* Battery overvoltage protection */
+			bq2415x_timer_error(bq,
+				"Battery overvoltage protection");
+			return;
+		case 5: /* Thermal shutdown (too hot) */
+			bq2415x_timer_error(bq,
+				"Thermal shutdown (too hot)");
+			return;
+		}
+	}
+
+	schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+}
+
+/**** power supply interface code ****/
+
+static enum power_supply_property bq2415x_power_supply_props[] = {
+	/* TODO: maybe add more power supply properties */
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static int bq2415x_power_supply_get_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     union power_supply_propval *val)
+{
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
+		if (ret < 0)
+			return ret;
+		else if (ret == 0) /* Ready */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (ret == 1) /* Charge in progress */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ret == 2) /* Charge done */
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq->model;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void bq2415x_power_supply_exit(struct bq2415x_device *bq)
+{
+	bq->autotimer = 0;
+	if (bq->automode > 0)
+		bq->automode = 0;
+	cancel_delayed_work_sync(&bq->work);
+	power_supply_unregister(bq->charger);
+	kfree(bq->model);
+}
+
+/**** additional sysfs entries for power supply interface ****/
+
+/* show *_status entries */
+static ssize_t bq2415x_sysfs_show_status(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	int ret;
+
+	if (strcmp(attr->attr.name, "otg_status") == 0)
+		command = BQ2415X_OTG_STATUS;
+	else if (strcmp(attr->attr.name, "charge_status") == 0)
+		command = BQ2415X_CHARGE_STATUS;
+	else if (strcmp(attr->attr.name, "boost_status") == 0)
+		command = BQ2415X_BOOST_STATUS;
+	else if (strcmp(attr->attr.name, "fault_status") == 0)
+		command = BQ2415X_FAULT_STATUS;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+/*
+ * set timer entry:
+ *    auto - enable auto mode
+ *    off - disable auto mode
+ *    (other values) - reset chip timer
+ */
+static ssize_t bq2415x_sysfs_set_timer(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	if (strncmp(buf, "auto", 4) == 0)
+		bq2415x_set_autotimer(bq, 1);
+	else if (strncmp(buf, "off", 3) == 0)
+		bq2415x_set_autotimer(bq, 0);
+	else
+		ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show timer entry (auto or off) */
+static ssize_t bq2415x_sysfs_show_timer(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+	if (bq->timer_error)
+		return sprintf(buf, "%s\n", bq->timer_error);
+
+	if (bq->autotimer)
+		return sprintf(buf, "auto\n");
+	return sprintf(buf, "off\n");
+}
+
+/*
+ * set mode entry:
+ *    auto - if automode is supported, enable it and set mode to reported
+ *    none - disable charger and boost mode
+ *    host - charging mode for host/hub chargers (current limit 500mA)
+ *    dedicated - charging mode for dedicated chargers (unlimited current limit)
+ *    boost - disable charger and enable boost mode
+ */
+static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf,
+				      size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_mode mode;
+	int ret = 0;
+
+	if (strncmp(buf, "auto", 4) == 0) {
+		if (bq->automode < 0)
+			return -EINVAL;
+		bq->automode = 1;
+		mode = bq->reported_mode;
+	} else if (strncmp(buf, "off", 3) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_OFF;
+	} else if (strncmp(buf, "none", 4) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_NONE;
+	} else if (strncmp(buf, "host", 4) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_HOST_CHARGER;
+	} else if (strncmp(buf, "dedicated", 9) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_DEDICATED_CHARGER;
+	} else if (strncmp(buf, "boost", 5) == 0) {
+		if (bq->automode > 0)
+			bq->automode = 0;
+		mode = BQ2415X_MODE_BOOST;
+	} else if (strncmp(buf, "reset", 5) == 0) {
+		bq2415x_reset_chip(bq);
+		bq2415x_set_defaults(bq);
+		if (bq->automode <= 0)
+			return count;
+		bq->automode = 1;
+		mode = bq->reported_mode;
+	} else {
+		return -EINVAL;
+	}
+
+	ret = bq2415x_set_mode(bq, mode);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show mode entry (auto, none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+
+	if (bq->automode > 0)
+		ret += sprintf(buf+ret, "auto (");
+
+	switch (bq->mode) {
+	case BQ2415X_MODE_OFF:
+		ret += sprintf(buf+ret, "off");
+		break;
+	case BQ2415X_MODE_NONE:
+		ret += sprintf(buf+ret, "none");
+		break;
+	case BQ2415X_MODE_HOST_CHARGER:
+		ret += sprintf(buf+ret, "host");
+		break;
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		ret += sprintf(buf+ret, "dedicated");
+		break;
+	case BQ2415X_MODE_BOOST:
+		ret += sprintf(buf+ret, "boost");
+		break;
+	}
+
+	if (bq->automode > 0)
+		ret += sprintf(buf+ret, ")");
+
+	ret += sprintf(buf+ret, "\n");
+	return ret;
+}
+
+/* show reported_mode entry (none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+	if (bq->automode < 0)
+		return -EINVAL;
+
+	switch (bq->reported_mode) {
+	case BQ2415X_MODE_OFF:
+		return sprintf(buf, "off\n");
+	case BQ2415X_MODE_NONE:
+		return sprintf(buf, "none\n");
+	case BQ2415X_MODE_HOST_CHARGER:
+		return sprintf(buf, "host\n");
+	case BQ2415X_MODE_DEDICATED_CHARGER:
+		return sprintf(buf, "dedicated\n");
+	case BQ2415X_MODE_BOOST:
+		return sprintf(buf, "boost\n");
+	}
+
+	return -EINVAL;
+}
+
+/* directly set raw value to chip register, format: 'register value' */
+static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf,
+					   size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+	unsigned int reg;
+	unsigned int val;
+
+	if (sscanf(buf, "%x %x", &reg, &val) != 2)
+		return -EINVAL;
+
+	if (reg > 4 || val > 255)
+		return -EINVAL;
+
+	ret = bq2415x_i2c_write(bq, reg, val);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* print value of chip register, format: 'register=value' */
+static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq,
+				       u8 reg,
+				       char *buf)
+{
+	int ret = bq2415x_i2c_read(bq, reg);
+
+	if (ret < 0)
+		return sprintf(buf, "%#.2x=error %d\n", reg, ret);
+	return sprintf(buf, "%#.2x=%#.2x\n", reg, ret);
+}
+
+/* show all raw values of chip register, format per line: 'register=value' */
+static ssize_t bq2415x_sysfs_show_registers(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	ssize_t ret = 0;
+
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret);
+	ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret);
+	return ret;
+}
+
+/* set current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_set_limit(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf,
+				       size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	long val;
+	int ret;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "current_limit") == 0)
+		ret = bq2415x_set_current_limit(bq, val);
+	else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+		ret = bq2415x_set_weak_battery_voltage(bq, val);
+	else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+		ret = bq2415x_set_battery_regulation_voltage(bq, val);
+	else if (strcmp(attr->attr.name, "charge_current") == 0)
+		ret = bq2415x_set_charge_current(bq, val);
+	else if (strcmp(attr->attr.name, "termination_current") == 0)
+		ret = bq2415x_set_termination_current(bq, val);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_show_limit(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	int ret;
+
+	if (strcmp(attr->attr.name, "current_limit") == 0)
+		ret = bq2415x_get_current_limit(bq);
+	else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+		ret = bq2415x_get_weak_battery_voltage(bq);
+	else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+		ret = bq2415x_get_battery_regulation_voltage(bq);
+	else if (strcmp(attr->attr.name, "charge_current") == 0)
+		ret = bq2415x_get_charge_current(bq);
+	else if (strcmp(attr->attr.name, "termination_current") == 0)
+		ret = bq2415x_get_termination_current(bq);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+/* set *_enable entries */
+static ssize_t bq2415x_sysfs_set_enable(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	long val;
+	int ret;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+		command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE :
+			BQ2415X_CHARGE_TERMINATION_DISABLE;
+	else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE :
+			BQ2415X_HIGH_IMPEDANCE_DISABLE;
+	else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+		command = val ? BQ2415X_OTG_PIN_ENABLE :
+			BQ2415X_OTG_PIN_DISABLE;
+	else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+		command = val ? BQ2415X_STAT_PIN_ENABLE :
+			BQ2415X_STAT_PIN_DISABLE;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+/* show *_enable entries */
+static ssize_t bq2415x_sysfs_show_enable(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+	enum bq2415x_command command;
+	int ret;
+
+	if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+		command = BQ2415X_CHARGE_TERMINATION_STATUS;
+	else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		command = BQ2415X_HIGH_IMPEDANCE_STATUS;
+	else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+		command = BQ2415X_OTG_PIN_STATUS;
+	else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+		command = BQ2415X_STAT_PIN_STATUS;
+	else
+		return -EINVAL;
+
+	ret = bq2415x_exec_command(bq, command);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", ret);
+}
+
+static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+
+static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+
+static DEVICE_ATTR(reported_mode, S_IRUGO,
+		bq2415x_sysfs_show_reported_mode, NULL);
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
+static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer);
+
+static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO,
+		bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers);
+
+static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+
+static struct attribute *bq2415x_sysfs_attrs[] = {
+	/*
+	 * TODO: some (appropriate) of these attrs should be switched to
+	 * use power supply class props.
+	 */
+	&dev_attr_current_limit.attr,
+	&dev_attr_weak_battery_voltage.attr,
+	&dev_attr_battery_regulation_voltage.attr,
+	&dev_attr_charge_current.attr,
+	&dev_attr_termination_current.attr,
+
+	&dev_attr_charge_termination_enable.attr,
+	&dev_attr_high_impedance_enable.attr,
+	&dev_attr_otg_pin_enable.attr,
+	&dev_attr_stat_pin_enable.attr,
+
+	&dev_attr_reported_mode.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_timer.attr,
+
+	&dev_attr_registers.attr,
+
+	&dev_attr_otg_status.attr,
+	&dev_attr_charge_status.attr,
+	&dev_attr_boost_status.attr,
+	&dev_attr_fault_status.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(bq2415x_sysfs);
+
+static int bq2415x_power_supply_init(struct bq2415x_device *bq)
+{
+	int ret;
+	int chip;
+	char revstr[8];
+	struct power_supply_config psy_cfg = {
+		.drv_data = bq,
+		.of_node = bq->dev->of_node,
+		.attr_grp = bq2415x_sysfs_groups,
+	};
+
+	bq->charger_desc.name = bq->name;
+	bq->charger_desc.type = POWER_SUPPLY_TYPE_USB;
+	bq->charger_desc.properties = bq2415x_power_supply_props;
+	bq->charger_desc.num_properties =
+			ARRAY_SIZE(bq2415x_power_supply_props);
+	bq->charger_desc.get_property = bq2415x_power_supply_get_property;
+
+	ret = bq2415x_detect_chip(bq);
+	if (ret < 0)
+		chip = BQUNKNOWN;
+	else
+		chip = ret;
+
+	ret = bq2415x_detect_revision(bq);
+	if (ret < 0)
+		strcpy(revstr, "unknown");
+	else
+		sprintf(revstr, "1.%d", ret);
+
+	bq->model = kasprintf(GFP_KERNEL,
+				"chip %s, revision %s, vender code %.3d",
+				bq2415x_chip_name[chip], revstr,
+				bq2415x_get_vender_code(bq));
+	if (!bq->model) {
+		dev_err(bq->dev, "failed to allocate model name\n");
+		return -ENOMEM;
+	}
+
+	bq->charger = power_supply_register(bq->dev, &bq->charger_desc,
+					    &psy_cfg);
+	if (IS_ERR(bq->charger)) {
+		kfree(bq->model);
+		return PTR_ERR(bq->charger);
+	}
+
+	return 0;
+}
+
+/* main bq2415x probe function */
+static int bq2415x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	int ret;
+	int num;
+	char *name = NULL;
+	struct bq2415x_device *bq;
+	struct device_node *np = client->dev.of_node;
+	struct bq2415x_platform_data *pdata = client->dev.platform_data;
+	const struct acpi_device_id *acpi_id = NULL;
+	struct power_supply *notify_psy = NULL;
+	union power_supply_propval prop;
+
+	if (!np && !pdata && !ACPI_HANDLE(&client->dev)) {
+		dev_err(&client->dev, "Neither devicetree, nor platform data, nor ACPI support\n");
+		return -ENODEV;
+	}
+
+	/* Get new ID for the new device */
+	mutex_lock(&bq2415x_id_mutex);
+	num = idr_alloc(&bq2415x_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&bq2415x_id_mutex);
+	if (num < 0)
+		return num;
+
+	if (id) {
+		name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
+	} else if (ACPI_HANDLE(&client->dev)) {
+		acpi_id =
+			acpi_match_device(client->dev.driver->acpi_match_table,
+					  &client->dev);
+		if (!acpi_id) {
+			dev_err(&client->dev, "failed to match device name\n");
+			ret = -ENODEV;
+			goto error_1;
+		}
+		name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
+	}
+	if (!name) {
+		dev_err(&client->dev, "failed to allocate device name\n");
+		ret = -ENOMEM;
+		goto error_1;
+	}
+
+	bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq) {
+		ret = -ENOMEM;
+		goto error_2;
+	}
+
+	i2c_set_clientdata(client, bq);
+
+	bq->id = num;
+	bq->dev = &client->dev;
+	if (id)
+		bq->chip = id->driver_data;
+	else if (ACPI_HANDLE(bq->dev))
+		bq->chip = acpi_id->driver_data;
+	bq->name = name;
+	bq->mode = BQ2415X_MODE_OFF;
+	bq->reported_mode = BQ2415X_MODE_OFF;
+	bq->autotimer = 0;
+	bq->automode = 0;
+
+	if (np || ACPI_HANDLE(bq->dev)) {
+		ret = device_property_read_u32(bq->dev,
+					       "ti,current-limit",
+					       &bq->init_data.current_limit);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					"ti,weak-battery-voltage",
+					&bq->init_data.weak_battery_voltage);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+				"ti,battery-regulation-voltage",
+				&bq->init_data.battery_regulation_voltage);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					       "ti,charge-current",
+					       &bq->init_data.charge_current);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+				"ti,termination-current",
+				&bq->init_data.termination_current);
+		if (ret)
+			goto error_2;
+		ret = device_property_read_u32(bq->dev,
+					       "ti,resistor-sense",
+					       &bq->init_data.resistor_sense);
+		if (ret)
+			goto error_2;
+		if (np)
+			bq->notify_node = of_parse_phandle(np,
+						"ti,usb-charger-detection", 0);
+	} else {
+		memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
+	}
+
+	bq2415x_reset_chip(bq);
+
+	ret = bq2415x_power_supply_init(bq);
+	if (ret) {
+		dev_err(bq->dev, "failed to register power supply: %d\n", ret);
+		goto error_2;
+	}
+
+	ret = bq2415x_set_defaults(bq);
+	if (ret) {
+		dev_err(bq->dev, "failed to set default values: %d\n", ret);
+		goto error_3;
+	}
+
+	if (bq->notify_node || bq->init_data.notify_device) {
+		bq->nb.notifier_call = bq2415x_notifier_call;
+		ret = power_supply_reg_notifier(&bq->nb);
+		if (ret) {
+			dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
+			goto error_3;
+		}
+
+		bq->automode = 1;
+		dev_info(bq->dev, "automode supported, waiting for events\n");
+	} else {
+		bq->automode = -1;
+		dev_info(bq->dev, "automode not supported\n");
+	}
+
+	/* Query for initial reported_mode and set it */
+	if (bq->nb.notifier_call) {
+		if (np) {
+			notify_psy = power_supply_get_by_phandle(np,
+						"ti,usb-charger-detection");
+			if (IS_ERR(notify_psy))
+				notify_psy = NULL;
+		} else if (bq->init_data.notify_device) {
+			notify_psy = power_supply_get_by_name(
+						bq->init_data.notify_device);
+		}
+	}
+	if (notify_psy) {
+		ret = power_supply_get_property(notify_psy,
+					POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
+		power_supply_put(notify_psy);
+
+		if (ret == 0) {
+			bq2415x_update_reported_mode(bq, prop.intval);
+			bq2415x_set_mode(bq, bq->reported_mode);
+		}
+	}
+
+	INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
+	bq2415x_set_autotimer(bq, 1);
+
+	dev_info(bq->dev, "driver registered\n");
+	return 0;
+
+error_3:
+	bq2415x_power_supply_exit(bq);
+error_2:
+	if (bq)
+		of_node_put(bq->notify_node);
+	kfree(name);
+error_1:
+	mutex_lock(&bq2415x_id_mutex);
+	idr_remove(&bq2415x_id, num);
+	mutex_unlock(&bq2415x_id_mutex);
+
+	return ret;
+}
+
+/* main bq2415x remove function */
+
+static void bq2415x_remove(struct i2c_client *client)
+{
+	struct bq2415x_device *bq = i2c_get_clientdata(client);
+
+	if (bq->nb.notifier_call)
+		power_supply_unreg_notifier(&bq->nb);
+
+	of_node_put(bq->notify_node);
+	bq2415x_power_supply_exit(bq);
+
+	bq2415x_reset_chip(bq);
+
+	mutex_lock(&bq2415x_id_mutex);
+	idr_remove(&bq2415x_id, bq->id);
+	mutex_unlock(&bq2415x_id_mutex);
+
+	dev_info(bq->dev, "driver unregistered\n");
+
+	kfree(bq->name);
+}
+
+static const struct i2c_device_id bq2415x_i2c_id_table[] = {
+	{ "bq2415x", BQUNKNOWN },
+	{ "bq24150", BQ24150 },
+	{ "bq24150a", BQ24150A },
+	{ "bq24151", BQ24151 },
+	{ "bq24151a", BQ24151A },
+	{ "bq24152", BQ24152 },
+	{ "bq24153", BQ24153 },
+	{ "bq24153a", BQ24153A },
+	{ "bq24155", BQ24155 },
+	{ "bq24156", BQ24156 },
+	{ "bq24156a", BQ24156A },
+	{ "bq24157s", BQ24157S },
+	{ "bq24158", BQ24158 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
+	{ "BQ2415X", BQUNKNOWN },
+	{ "BQ241500", BQ24150 },
+	{ "BQA24150", BQ24150A },
+	{ "BQ241510", BQ24151 },
+	{ "BQA24151", BQ24151A },
+	{ "BQ241520", BQ24152 },
+	{ "BQ241530", BQ24153 },
+	{ "BQA24153", BQ24153A },
+	{ "BQ241550", BQ24155 },
+	{ "BQ241560", BQ24156 },
+	{ "BQA24156", BQ24156A },
+	{ "BQS24157", BQ24157S },
+	{ "BQ241580", BQ24158 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq2415x_of_match_table[] = {
+	{ .compatible = "ti,bq24150" },
+	{ .compatible = "ti,bq24150a" },
+	{ .compatible = "ti,bq24151" },
+	{ .compatible = "ti,bq24151a" },
+	{ .compatible = "ti,bq24152" },
+	{ .compatible = "ti,bq24153" },
+	{ .compatible = "ti,bq24153a" },
+	{ .compatible = "ti,bq24155" },
+	{ .compatible = "ti,bq24156" },
+	{ .compatible = "ti,bq24156a" },
+	{ .compatible = "ti,bq24157s" },
+	{ .compatible = "ti,bq24158" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq2415x_of_match_table);
+#endif
+
+static struct i2c_driver bq2415x_driver = {
+	.driver = {
+		.name = "bq2415x-charger",
+		.of_match_table = of_match_ptr(bq2415x_of_match_table),
+		.acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
+	},
+	.probe = bq2415x_probe,
+	.remove = bq2415x_remove,
+	.id_table = bq2415x_i2c_id_table,
+};
+module_i2c_driver(bq2415x_driver);
+
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("bq2415x charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
new file mode 100644
index 000000000..0d3db227b
--- /dev/null
+++ b/drivers/power/supply/bq24190_charger.c
@@ -0,0 +1,2051 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the TI bq24190 battery charger.
+ *
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/workqueue.h>
+#include <linux/i2c.h>
+#include <linux/extcon-provider.h>
+
+#define	BQ24190_MANUFACTURER	"Texas Instruments"
+
+#define BQ24190_REG_ISC		0x00 /* Input Source Control */
+#define BQ24190_REG_ISC_EN_HIZ_MASK		BIT(7)
+#define BQ24190_REG_ISC_EN_HIZ_SHIFT		7
+#define BQ24190_REG_ISC_VINDPM_MASK		(BIT(6) | BIT(5) | BIT(4) | \
+						 BIT(3))
+#define BQ24190_REG_ISC_VINDPM_SHIFT		3
+#define BQ24190_REG_ISC_IINLIM_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_ISC_IINLIM_SHIFT		0
+
+#define BQ24190_REG_POC		0x01 /* Power-On Configuration */
+#define BQ24190_REG_POC_RESET_MASK		BIT(7)
+#define BQ24190_REG_POC_RESET_SHIFT		7
+#define BQ24190_REG_POC_WDT_RESET_MASK		BIT(6)
+#define BQ24190_REG_POC_WDT_RESET_SHIFT		6
+#define BQ24190_REG_POC_CHG_CONFIG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_POC_CHG_CONFIG_SHIFT	4
+#define BQ24190_REG_POC_CHG_CONFIG_DISABLE		0x0
+#define BQ24190_REG_POC_CHG_CONFIG_CHARGE		0x1
+#define BQ24190_REG_POC_CHG_CONFIG_OTG			0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT		0x3
+#define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
+#define BQ24190_REG_POC_SYS_MIN_SHIFT		1
+#define BQ24190_REG_POC_SYS_MIN_MIN			3000
+#define BQ24190_REG_POC_SYS_MIN_MAX			3700
+#define BQ24190_REG_POC_BOOST_LIM_MASK		BIT(0)
+#define BQ24190_REG_POC_BOOST_LIM_SHIFT		0
+
+#define BQ24190_REG_CCC		0x02 /* Charge Current Control */
+#define BQ24190_REG_CCC_ICHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CCC_ICHG_SHIFT		2
+#define BQ24190_REG_CCC_FORCE_20PCT_MASK	BIT(0)
+#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT	0
+
+#define BQ24190_REG_PCTCC	0x03 /* Pre-charge/Termination Current Cntl */
+#define BQ24190_REG_PCTCC_IPRECHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4))
+#define BQ24190_REG_PCTCC_IPRECHG_SHIFT		4
+#define BQ24190_REG_PCTCC_IPRECHG_MIN			128
+#define BQ24190_REG_PCTCC_IPRECHG_MAX			2048
+#define BQ24190_REG_PCTCC_ITERM_MASK		(BIT(3) | BIT(2) | BIT(1) | \
+						 BIT(0))
+#define BQ24190_REG_PCTCC_ITERM_SHIFT		0
+#define BQ24190_REG_PCTCC_ITERM_MIN			128
+#define BQ24190_REG_PCTCC_ITERM_MAX			2048
+
+#define BQ24190_REG_CVC		0x04 /* Charge Voltage Control */
+#define BQ24190_REG_CVC_VREG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CVC_VREG_SHIFT		2
+#define BQ24190_REG_CVC_BATLOWV_MASK		BIT(1)
+#define BQ24190_REG_CVC_BATLOWV_SHIFT		1
+#define BQ24190_REG_CVC_VRECHG_MASK		BIT(0)
+#define BQ24190_REG_CVC_VRECHG_SHIFT		0
+
+#define BQ24190_REG_CTTC	0x05 /* Charge Term/Timer Control */
+#define BQ24190_REG_CTTC_EN_TERM_MASK		BIT(7)
+#define BQ24190_REG_CTTC_EN_TERM_SHIFT		7
+#define BQ24190_REG_CTTC_TERM_STAT_MASK		BIT(6)
+#define BQ24190_REG_CTTC_TERM_STAT_SHIFT	6
+#define BQ24190_REG_CTTC_WATCHDOG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_CTTC_WATCHDOG_SHIFT		4
+#define BQ24190_REG_CTTC_EN_TIMER_MASK		BIT(3)
+#define BQ24190_REG_CTTC_EN_TIMER_SHIFT		3
+#define BQ24190_REG_CTTC_CHG_TIMER_MASK		(BIT(2) | BIT(1))
+#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT	1
+#define BQ24190_REG_CTTC_JEITA_ISET_MASK	BIT(0)
+#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT	0
+
+#define BQ24190_REG_ICTRC	0x06 /* IR Comp/Thermal Regulation Control */
+#define BQ24190_REG_ICTRC_BAT_COMP_MASK		(BIT(7) | BIT(6) | BIT(5))
+#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT	5
+#define BQ24190_REG_ICTRC_VCLAMP_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_ICTRC_VCLAMP_SHIFT		2
+#define BQ24190_REG_ICTRC_TREG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_ICTRC_TREG_SHIFT		0
+
+#define BQ24190_REG_MOC		0x07 /* Misc. Operation Control */
+#define BQ24190_REG_MOC_DPDM_EN_MASK		BIT(7)
+#define BQ24190_REG_MOC_DPDM_EN_SHIFT		7
+#define BQ24190_REG_MOC_TMR2X_EN_MASK		BIT(6)
+#define BQ24190_REG_MOC_TMR2X_EN_SHIFT		6
+#define BQ24190_REG_MOC_BATFET_DISABLE_MASK	BIT(5)
+#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT	5
+#define BQ24190_REG_MOC_JEITA_VSET_MASK		BIT(4)
+#define BQ24190_REG_MOC_JEITA_VSET_SHIFT	4
+#define BQ24190_REG_MOC_INT_MASK_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_MOC_INT_MASK_SHIFT		0
+
+#define BQ24190_REG_SS		0x08 /* System Status */
+#define BQ24190_REG_SS_VBUS_STAT_MASK		(BIT(7) | BIT(6))
+#define BQ24190_REG_SS_VBUS_STAT_SHIFT		6
+#define BQ24190_REG_SS_CHRG_STAT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_SS_CHRG_STAT_SHIFT		4
+#define BQ24190_REG_SS_DPM_STAT_MASK		BIT(3)
+#define BQ24190_REG_SS_DPM_STAT_SHIFT		3
+#define BQ24190_REG_SS_PG_STAT_MASK		BIT(2)
+#define BQ24190_REG_SS_PG_STAT_SHIFT		2
+#define BQ24190_REG_SS_THERM_STAT_MASK		BIT(1)
+#define BQ24190_REG_SS_THERM_STAT_SHIFT		1
+#define BQ24190_REG_SS_VSYS_STAT_MASK		BIT(0)
+#define BQ24190_REG_SS_VSYS_STAT_SHIFT		0
+
+#define BQ24190_REG_F		0x09 /* Fault */
+#define BQ24190_REG_F_WATCHDOG_FAULT_MASK	BIT(7)
+#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT	7
+#define BQ24190_REG_F_BOOST_FAULT_MASK		BIT(6)
+#define BQ24190_REG_F_BOOST_FAULT_SHIFT		6
+#define BQ24190_REG_F_CHRG_FAULT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_F_CHRG_FAULT_SHIFT		4
+#define BQ24190_REG_F_BAT_FAULT_MASK		BIT(3)
+#define BQ24190_REG_F_BAT_FAULT_SHIFT		3
+#define BQ24190_REG_F_NTC_FAULT_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_F_NTC_FAULT_SHIFT		0
+
+#define BQ24190_REG_VPRS	0x0A /* Vendor/Part/Revision Status */
+#define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
+#define BQ24190_REG_VPRS_PN_SHIFT		3
+#define BQ24190_REG_VPRS_PN_24190			0x4
+#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193, 24196 */
+#define BQ24190_REG_VPRS_PN_24192I			0x3
+#define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
+#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
+#define BQ24190_REG_VPRS_DEV_REG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_VPRS_DEV_REG_SHIFT		0
+
+/*
+ * The FAULT register is latched by the bq24190 (except for NTC_FAULT)
+ * so the first read after a fault returns the latched value and subsequent
+ * reads return the current value.  In order to return the fault status
+ * to the user, have the interrupt handler save the reg's value and retrieve
+ * it in the appropriate health/status routine.
+ */
+struct bq24190_dev_info {
+	struct i2c_client		*client;
+	struct device			*dev;
+	struct extcon_dev		*edev;
+	struct power_supply		*charger;
+	struct power_supply		*battery;
+	struct delayed_work		input_current_limit_work;
+	char				model_name[I2C_NAME_SIZE];
+	bool				initialized;
+	bool				irq_event;
+	bool				otg_vbus_enabled;
+	int				charge_type;
+	u16				sys_min;
+	u16				iprechg;
+	u16				iterm;
+	u32				ichg;
+	u32				ichg_max;
+	u32				vreg;
+	u32				vreg_max;
+	struct mutex			f_reg_lock;
+	u8				f_reg;
+	u8				ss_reg;
+	u8				watchdog;
+};
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+					   const union power_supply_propval *val);
+
+static const unsigned int bq24190_usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_NONE,
+};
+
+/*
+ * The tables below provide a 2-way mapping for the value that goes in
+ * the register field and the real-world value that it represents.
+ * The index of the array is the value that goes in the register; the
+ * number at that index in the array is the real-world value that it
+ * represents.
+ */
+
+/* REG00[2:0] (IINLIM) in uAh */
+static const int bq24190_isc_iinlim_values[] = {
+	 100000,  150000,  500000,  900000, 1200000, 1500000, 2000000, 3000000
+};
+
+/* REG02[7:2] (ICHG) in uAh */
+static const int bq24190_ccc_ichg_values[] = {
+	 512000,  576000,  640000,  704000,  768000,  832000,  896000,  960000,
+	1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
+	1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
+	2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
+	2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
+	3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
+	3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
+	4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
+};
+
+/* REG04[7:2] (VREG) in uV */
+static const int bq24190_cvc_vreg_values[] = {
+	3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
+	3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
+	3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
+	3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
+	4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
+	4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
+	4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
+	4400000
+};
+
+/* REG06[1:0] (TREG) in tenths of degrees Celsius */
+static const int bq24190_ictrc_treg_values[] = {
+	600, 800, 1000, 1200
+};
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'.  The index range returned is 0 to 'tbl_size' - 1.  Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
+{
+	int i;
+
+	for (i = 1; i < tbl_size; i++)
+		if (v < tbl[i])
+			break;
+
+	return i - 1;
+}
+
+/* Basic driver I/O routines */
+
+static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(bdi->client, reg);
+	if (ret < 0)
+		return ret;
+
+	*data = ret;
+	return 0;
+}
+
+static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(bdi->client, reg, data);
+}
+
+static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 *data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= mask;
+	v >>= shift;
+	*data = v;
+
+	return 0;
+}
+
+static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= ~mask;
+	v |= ((data << shift) & mask);
+
+	return bq24190_write(bdi, reg, v);
+}
+
+static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
+	if (ret < 0)
+		return ret;
+
+	v = (v >= tbl_size) ? (tbl_size - 1) : v;
+	*val = tbl[v];
+
+	return 0;
+}
+
+static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int val)
+{
+	u8 idx;
+
+	idx = bq24190_find_idx(tbl, tbl_size, val);
+
+	return bq24190_write_mask(bdi, reg, mask, shift, idx);
+}
+
+#ifdef CONFIG_SYSFS
+/*
+ * There are a numerous options that are configurable on the bq24190
+ * that go well beyond what the power_supply properties provide access to.
+ * Provide sysfs access to them so they can be examined and possibly modified
+ * on the fly.  They will be provided for the charger power_supply object only
+ * and will be prefixed by 'f_' to make them easier to recognize.
+ */
+
+#define BQ24190_SYSFS_FIELD(_name, r, f, m, store)			\
+{									\
+	.attr	= __ATTR(f_##_name, m, bq24190_sysfs_show, store),	\
+	.reg	= BQ24190_REG_##r,					\
+	.mask	= BQ24190_REG_##r##_##f##_MASK,				\
+	.shift	= BQ24190_REG_##r##_##f##_SHIFT,			\
+}
+
+#define BQ24190_SYSFS_FIELD_RW(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO,	\
+				bq24190_sysfs_store)
+
+#define BQ24190_SYSFS_FIELD_RO(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf);
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count);
+
+struct bq24190_sysfs_field_info {
+	struct device_attribute	attr;
+	u8	reg;
+	u8	mask;
+	u8	shift;
+};
+
+/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
+#undef SS
+
+static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
+			/*	sysfs name	reg	field in reg */
+	BQ24190_SYSFS_FIELD_RW(en_hiz,		ISC,	EN_HIZ),
+	BQ24190_SYSFS_FIELD_RW(vindpm,		ISC,	VINDPM),
+	BQ24190_SYSFS_FIELD_RW(iinlim,		ISC,	IINLIM),
+	BQ24190_SYSFS_FIELD_RW(chg_config,	POC,	CHG_CONFIG),
+	BQ24190_SYSFS_FIELD_RW(sys_min,		POC,	SYS_MIN),
+	BQ24190_SYSFS_FIELD_RW(boost_lim,	POC,	BOOST_LIM),
+	BQ24190_SYSFS_FIELD_RW(ichg,		CCC,	ICHG),
+	BQ24190_SYSFS_FIELD_RW(force_20_pct,	CCC,	FORCE_20PCT),
+	BQ24190_SYSFS_FIELD_RW(iprechg,		PCTCC,	IPRECHG),
+	BQ24190_SYSFS_FIELD_RW(iterm,		PCTCC,	ITERM),
+	BQ24190_SYSFS_FIELD_RW(vreg,		CVC,	VREG),
+	BQ24190_SYSFS_FIELD_RW(batlowv,		CVC,	BATLOWV),
+	BQ24190_SYSFS_FIELD_RW(vrechg,		CVC,	VRECHG),
+	BQ24190_SYSFS_FIELD_RW(en_term,		CTTC,	EN_TERM),
+	BQ24190_SYSFS_FIELD_RW(term_stat,	CTTC,	TERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog,	CTTC,	WATCHDOG),
+	BQ24190_SYSFS_FIELD_RW(en_timer,	CTTC,	EN_TIMER),
+	BQ24190_SYSFS_FIELD_RW(chg_timer,	CTTC,	CHG_TIMER),
+	BQ24190_SYSFS_FIELD_RW(jeta_iset,	CTTC,	JEITA_ISET),
+	BQ24190_SYSFS_FIELD_RW(bat_comp,	ICTRC,	BAT_COMP),
+	BQ24190_SYSFS_FIELD_RW(vclamp,		ICTRC,	VCLAMP),
+	BQ24190_SYSFS_FIELD_RW(treg,		ICTRC,	TREG),
+	BQ24190_SYSFS_FIELD_RW(dpdm_en,		MOC,	DPDM_EN),
+	BQ24190_SYSFS_FIELD_RW(tmr2x_en,	MOC,	TMR2X_EN),
+	BQ24190_SYSFS_FIELD_RW(batfet_disable,	MOC,	BATFET_DISABLE),
+	BQ24190_SYSFS_FIELD_RW(jeita_vset,	MOC,	JEITA_VSET),
+	BQ24190_SYSFS_FIELD_RO(int_mask,	MOC,	INT_MASK),
+	BQ24190_SYSFS_FIELD_RO(vbus_stat,	SS,	VBUS_STAT),
+	BQ24190_SYSFS_FIELD_RO(chrg_stat,	SS,	CHRG_STAT),
+	BQ24190_SYSFS_FIELD_RO(dpm_stat,	SS,	DPM_STAT),
+	BQ24190_SYSFS_FIELD_RO(pg_stat,		SS,	PG_STAT),
+	BQ24190_SYSFS_FIELD_RO(therm_stat,	SS,	THERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(vsys_stat,	SS,	VSYS_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog_fault,	F,	WATCHDOG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(boost_fault,	F,	BOOST_FAULT),
+	BQ24190_SYSFS_FIELD_RO(chrg_fault,	F,	CHRG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(bat_fault,	F,	BAT_FAULT),
+	BQ24190_SYSFS_FIELD_RO(ntc_fault,	F,	NTC_FAULT),
+	BQ24190_SYSFS_FIELD_RO(pn,		VPRS,	PN),
+	BQ24190_SYSFS_FIELD_RO(ts_profile,	VPRS,	TS_PROFILE),
+	BQ24190_SYSFS_FIELD_RO(dev_reg,		VPRS,	DEV_REG),
+};
+
+static struct attribute *
+	bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
+
+ATTRIBUTE_GROUPS(bq24190_sysfs);
+
+static void bq24190_sysfs_init_attrs(void)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
+
+	bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
+}
+
+static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
+		const char *name)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
+			break;
+
+	if (i >= limit)
+		return NULL;
+
+	return &bq24190_sysfs_field_tbl[i];
+}
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	struct bq24190_sysfs_field_info *info;
+	ssize_t count;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
+	if (ret)
+		count = ret;
+	else
+		count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return count;
+}
+
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	struct bq24190_sysfs_field_info *info;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = kstrtou8(buf, 0, &v);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
+	if (ret)
+		count = ret;
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return count;
+}
+#endif
+
+static int bq24190_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable)
+{
+	union power_supply_propval val = { .intval = bdi->charge_type };
+	int ret;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		return ret;
+	}
+
+	bdi->otg_vbus_enabled = enable;
+	if (enable)
+		ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+					 BQ24190_REG_POC_CHG_CONFIG_MASK,
+					 BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+					 BQ24190_REG_POC_CHG_CONFIG_OTG);
+	else
+		ret = bq24190_charger_set_charge_type(bdi, &val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_REGULATOR
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+	return bq24190_set_otg_vbus(rdev_get_drvdata(dev), true);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+	return bq24190_set_otg_vbus(rdev_get_drvdata(dev), false);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+	u8 val;
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		return ret;
+	}
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_CHG_CONFIG_MASK,
+				BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	if (ret)
+		return ret;
+
+	bdi->otg_vbus_enabled = (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+				 val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
+	return bdi->otg_vbus_enabled;
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+	.enable = bq24190_vbus_enable,
+	.disable = bq24190_vbus_disable,
+	.is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+	.name = "usb_otg_vbus",
+	.of_match = "usb-otg-vbus",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq24190_vbus_ops,
+	.fixed_uV = 5000000,
+	.n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+	struct regulator_config cfg = { };
+	struct regulator_dev *reg;
+	int ret = 0;
+
+	cfg.dev = bdi->dev;
+	if (pdata && pdata->regulator_init_data)
+		cfg.init_data = pdata->regulator_init_data;
+	else
+		cfg.init_data = &bq24190_vbus_init_data;
+	cfg.driver_data = bdi;
+	reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+	}
+
+	return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	return 0;
+}
+#endif
+
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
+{
+	int ret;
+	u8 v;
+
+	ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
+	if (ret < 0)
+		return ret;
+
+	bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
+					BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+	/*
+	 * According to the "Host Mode and default Mode" section of the
+	 * manual, a write to any register causes the bq24190 to switch
+	 * from default mode to host mode.  It will switch back to default
+	 * mode after a WDT timeout unless the WDT is turned off as well.
+	 * So, by simply turning off the WDT, we accomplish both with the
+	 * same write.
+	 */
+	v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
+
+	ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+	if (ret < 0)
+		return ret;
+
+	if (bdi->sys_min) {
+		v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
+		ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+					 BQ24190_REG_POC_SYS_MIN_MASK,
+					 BQ24190_REG_POC_SYS_MIN_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iprechg) {
+		v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_IPRECHG_MASK,
+					 BQ24190_REG_PCTCC_IPRECHG_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->iterm) {
+		v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
+		ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+					 BQ24190_REG_PCTCC_ITERM_MASK,
+					 BQ24190_REG_PCTCC_ITERM_SHIFT,
+					 v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->ichg) {
+		ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+					    BQ24190_REG_CCC_ICHG_MASK,
+					    BQ24190_REG_CCC_ICHG_SHIFT,
+					    bq24190_ccc_ichg_values,
+					    ARRAY_SIZE(bq24190_ccc_ichg_values),
+					    bdi->ichg);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (bdi->vreg) {
+		ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+					    BQ24190_REG_CVC_VREG_MASK,
+					    BQ24190_REG_CVC_VREG_SHIFT,
+					    bq24190_cvc_vreg_values,
+					    ARRAY_SIZE(bq24190_cvc_vreg_values),
+					    bdi->vreg);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int bq24190_register_reset(struct bq24190_dev_info *bdi)
+{
+	int ret, limit = 100;
+	u8 v;
+
+	/*
+	 * This prop. can be passed on device instantiation from platform code:
+	 * struct property_entry pe[] =
+	 *   { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
+	 * struct i2c_board_info bi =
+	 *   { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
+	 * struct i2c_adapter ad = { ... };
+	 * i2c_add_adapter(&ad);
+	 * i2c_new_client_device(&ad, &bi);
+	 */
+	if (device_property_read_bool(bdi->dev, "disable-reset"))
+		return 0;
+
+	/* Reset the registers */
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_RESET_MASK,
+			BQ24190_REG_POC_RESET_SHIFT,
+			0x1);
+	if (ret < 0)
+		return ret;
+
+	/* Reset bit will be cleared by hardware so poll until it is */
+	do {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_RESET_MASK,
+				BQ24190_REG_POC_RESET_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		if (v == 0)
+			return 0;
+
+		usleep_range(100, 200);
+	} while (--limit);
+
+	return -EIO;
+}
+
+/* Charger power supply property routines */
+
+static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int type, ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+			&v);
+	if (ret < 0)
+		return ret;
+
+	/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
+	if (!v) {
+		type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+	} else {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
+			     POWER_SUPPLY_CHARGE_TYPE_FAST;
+	}
+
+	val->intval = type;
+
+	return 0;
+}
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 chg_config, force_20pct, en_term;
+	int ret;
+
+	/*
+	 * According to the "Termination when REG02[0] = 1" section of
+	 * the bq24190 manual, the trickle charge could be less than the
+	 * termination current so it recommends turning off the termination
+	 * function.
+	 *
+	 * Note: AFAICT from the datasheet, the user will have to manually
+	 * turn off the charging when in 20% mode.  If its not turned off,
+	 * there could be battery damage.  So, use this mode at your own risk.
+	 */
+	switch (val->intval) {
+	case POWER_SUPPLY_CHARGE_TYPE_NONE:
+		chg_config = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		chg_config = 0x1;
+		force_20pct = 0x1;
+		en_term = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		chg_config = 0x1;
+		force_20pct = 0x0;
+		en_term = 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	bdi->charge_type = val->intval;
+	/*
+	 * If the 5V Vbus boost regulator is enabled delay setting
+	 * the charge-type until its gets disabled.
+	 */
+	if (bdi->otg_vbus_enabled)
+		return 0;
+
+	if (chg_config) { /* Enabling the charger */
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				force_20pct);
+		if (ret < 0)
+			return ret;
+
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
+				BQ24190_REG_CTTC_EN_TERM_MASK,
+				BQ24190_REG_CTTC_EN_TERM_SHIFT,
+				en_term);
+		if (ret < 0)
+			return ret;
+	}
+
+	return bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
+}
+
+static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health;
+
+	mutex_lock(&bdi->f_reg_lock);
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	if (v & BQ24190_REG_F_NTC_FAULT_MASK) {
+		switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) {
+		case 0x1: /* TS1  Cold */
+		case 0x3: /* TS2  Cold */
+		case 0x5: /* Both Cold */
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		case 0x2: /* TS1  Hot */
+		case 0x4: /* TS2  Hot */
+		case 0x6: /* Both Hot */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	} else if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) {
+		switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) {
+		case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
+			/*
+			 * This could be over-voltage or under-voltage
+			 * and there's no way to tell which.  Instead
+			 * of looking foolish and returning 'OVERVOLTAGE'
+			 * when its really under-voltage, just return
+			 * 'UNSPEC_FAILURE'.
+			 */
+			health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+			break;
+		case 0x2: /* Thermal Shutdown */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		case 0x3: /* Charge Safety Timer Expiration */
+			health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			break;
+		default:  /* prevent compiler warning */
+			health = -1;
+		}
+	} else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
+		/*
+		 * This could be over-current or over-voltage but there's
+		 * no way to tell which.  Return 'OVERVOLTAGE' since there
+		 * isn't an 'OVERCURRENT' value defined that we can return
+		 * even if it was over-current.
+		 */
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		health = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	val->intval = health;
+
+	return 0;
+}
+
+static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 pg_stat, batfet_disable;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
+			BQ24190_REG_SS_PG_STAT_MASK,
+			BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+	if (ret < 0)
+		return ret;
+
+	val->intval = pg_stat && !batfet_disable;
+
+	return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+				      const union power_supply_propval *val);
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+				      union power_supply_propval *val);
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+					      union power_supply_propval *val);
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+					      const union power_supply_propval *val);
+
+static int bq24190_charger_set_online(struct bq24190_dev_info *bdi,
+				      const union power_supply_propval *val)
+{
+	return bq24190_battery_set_online(bdi, val);
+}
+
+static int bq24190_charger_get_status(struct bq24190_dev_info *bdi,
+				      union power_supply_propval *val)
+{
+	return bq24190_battery_get_status(bdi, val);
+}
+
+static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi,
+					      union power_supply_propval *val)
+{
+	return bq24190_battery_get_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
+					      const union power_supply_propval *val)
+{
+	return bq24190_battery_set_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_IPRECHG_MASK,
+			BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
+static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+			BQ24190_REG_PCTCC_ITERM_MASK,
+			BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ++v * 128 * 1000;
+	return 0;
+}
+
+static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int curr, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
+	if (v)
+		curr /= 5;
+
+	val->intval = curr;
+	return 0;
+}
+
+static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 v;
+	int ret, curr = val->intval;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
+	if (v)
+		curr *= 5;
+
+	if (curr > bdi->ichg_max)
+		return -EINVAL;
+
+	ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
+	if (ret < 0)
+		return ret;
+
+	bdi->ichg = curr;
+
+	return 0;
+}
+
+static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int voltage, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
+	if (ret < 0)
+		return ret;
+
+	val->intval = voltage;
+	return 0;
+}
+
+static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	int ret;
+
+	if (val->intval > bdi->vreg_max)
+		return -EINVAL;
+
+	ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
+	if (ret < 0)
+		return ret;
+
+	bdi->vreg = val->intval;
+
+	return 0;
+}
+
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int iinlimit, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+	if (ret < 0)
+		return ret;
+
+	val->intval = iinlimit;
+	return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+			BQ24190_REG_ISC_IINLIM_MASK,
+			BQ24190_REG_ISC_IINLIM_SHIFT,
+			bq24190_isc_iinlim_values,
+			ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
+static int bq24190_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_get_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_charger_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_charger_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq24190_charger_get_status(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret =  bq24190_charger_get_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq24190_charger_get_precharge(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq24190_charger_get_charge_term(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_get_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = bdi->ichg_max;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_get_voltage(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = bdi->vreg_max;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_get_iinlimit(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bdi->model_name;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ24190_MANUFACTURER;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_charger_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_charger_set_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_charger_set_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_set_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_set_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_set_voltage(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq24190_charger_set_iinlimit(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_charger_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+	struct bq24190_dev_info *bdi =
+		container_of(work, struct bq24190_dev_info,
+			     input_current_limit_work.work);
+	union power_supply_propval val;
+	int ret;
+
+	ret = power_supply_get_property_from_supplier(bdi->charger,
+						      POWER_SUPPLY_PROP_CURRENT_MAX,
+						      &val);
+	if (ret)
+		return;
+
+	bq24190_charger_set_property(bdi->charger,
+				     POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+				     &val);
+	power_supply_changed(bdi->charger);
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+	/*
+	 * The Power-Good detection may take up to 220ms, sometimes
+	 * the external charger detection is quicker, and the bq24190 will
+	 * reset to iinlim based on its own charger detection (which is not
+	 * hooked up when using external charger detection) resulting in a
+	 * too low default 500mA iinlim. Delay setting the input-current-limit
+	 * for 300ms to avoid this.
+	 */
+	queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+			   msecs_to_jiffies(300));
+}
+
+static enum power_supply_property bq24190_charger_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *bq24190_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static const struct power_supply_desc bq24190_charger_desc = {
+	.name			= "bq24190-charger",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= bq24190_charger_properties,
+	.num_properties		= ARRAY_SIZE(bq24190_charger_properties),
+	.get_property		= bq24190_charger_get_property,
+	.set_property		= bq24190_charger_set_property,
+	.property_is_writeable	= bq24190_charger_property_is_writeable,
+	.external_power_changed	= bq24190_charger_external_power_changed,
+};
+
+/* Battery power supply property routines */
+
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 ss_reg, chrg_fault;
+	int status, ret;
+
+	mutex_lock(&bdi->f_reg_lock);
+	chrg_fault = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
+	chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The battery must be discharging when any of these are true:
+	 * - there is no good power source;
+	 * - there is a charge fault.
+	 * Could also be discharging when in "supplement mode" but
+	 * there is no way to tell when its in that mode.
+	 */
+	if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+	} else {
+		ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
+		ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
+
+		switch (ss_reg) {
+		case 0x0: /* Not Charging */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		case 0x1: /* Pre-charge */
+		case 0x2: /* Fast Charging */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0x3: /* Charge Termination Done */
+			status = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			ret = -EIO;
+		}
+	}
+
+	if (!ret)
+		val->intval = status;
+
+	return ret;
+}
+
+static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health;
+
+	mutex_lock(&bdi->f_reg_lock);
+	v = bdi->f_reg;
+	mutex_unlock(&bdi->f_reg_lock);
+
+	if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		v &= BQ24190_REG_F_NTC_FAULT_MASK;
+		v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
+
+		switch (v) {
+		case 0x0: /* Normal */
+			health = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		case 0x1: /* TS1 Cold */
+		case 0x3: /* TS2 Cold */
+		case 0x5: /* Both Cold */
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		case 0x2: /* TS1 Hot */
+		case 0x4: /* TS2 Hot */
+		case 0x6: /* Both Hot */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	val->intval = health;
+	return 0;
+}
+
+static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 batfet_disable;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+	if (ret < 0)
+		return ret;
+
+	val->intval = !batfet_disable;
+	return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_write_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
+}
+
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int temp, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
+	if (ret < 0)
+		return ret;
+
+	val->intval = temp;
+	return 0;
+}
+
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
+}
+
+static int bq24190_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq24190_battery_get_status(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_battery_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		/* Could be Li-on or Li-polymer but no way to tell which */
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_get_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_battery_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+	int ret;
+
+	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_set_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_set_temp_alert_max(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_battery_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property bq24190_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static const struct power_supply_desc bq24190_battery_desc = {
+	.name			= "bq24190-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= bq24190_battery_properties,
+	.num_properties		= ARRAY_SIZE(bq24190_battery_properties),
+	.get_property		= bq24190_battery_get_property,
+	.set_property		= bq24190_battery_set_property,
+	.property_is_writeable	= bq24190_battery_property_is_writeable,
+};
+
+static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg)
+{
+	bool otg_enabled;
+	int ret;
+
+	otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK);
+	ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled);
+	if (ret < 0)
+		dev_err(bdi->dev, "Can't set extcon state to %d: %d\n",
+			otg_enabled, ret);
+
+	return ret;
+}
+
+static void bq24190_check_status(struct bq24190_dev_info *bdi)
+{
+	const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+	const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+				| BQ24190_REG_F_NTC_FAULT_MASK;
+	bool alert_charger = false, alert_battery = false;
+	u8 ss_reg = 0, f_reg = 0;
+	int i, ret;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0) {
+		dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
+		return;
+	}
+
+	i = 0;
+	do {
+		ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+		if (ret < 0) {
+			dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+			return;
+		}
+	} while (f_reg && ++i < 2);
+
+	/* ignore over/under voltage fault after disconnect */
+	if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
+	    !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
+		f_reg = 0;
+
+	if (f_reg != bdi->f_reg) {
+		dev_warn(bdi->dev,
+			"Fault: boost %d, charge %d, battery %d, ntc %d\n",
+			!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
+			!!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
+
+		mutex_lock(&bdi->f_reg_lock);
+		if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+			alert_battery = true;
+		if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+			alert_charger = true;
+		bdi->f_reg = f_reg;
+		mutex_unlock(&bdi->f_reg_lock);
+	}
+
+	if (ss_reg != bdi->ss_reg) {
+		/*
+		 * The device is in host mode so when PG_STAT goes from 1->0
+		 * (i.e., power removed) HIZ needs to be disabled.
+		 */
+		if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+				!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+			ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+					BQ24190_REG_ISC_EN_HIZ_MASK,
+					BQ24190_REG_ISC_EN_HIZ_SHIFT,
+					0);
+			if (ret < 0)
+				dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+					ret);
+		}
+
+		if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+			alert_battery = true;
+		if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+			alert_charger = true;
+		bdi->ss_reg = ss_reg;
+	}
+
+	if (alert_charger || alert_battery) {
+		power_supply_changed(bdi->charger);
+		bq24190_configure_usb_otg(bdi, ss_reg);
+	}
+	if (alert_battery && bdi->battery)
+		power_supply_changed(bdi->battery);
+
+	dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
+}
+
+static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
+{
+	struct bq24190_dev_info *bdi = data;
+	int error;
+
+	bdi->irq_event = true;
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+		return IRQ_NONE;
+	}
+	bq24190_check_status(bdi);
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+	bdi->irq_event = false;
+
+	return IRQ_HANDLED;
+}
+
+static int bq24190_hw_init(struct bq24190_dev_info *bdi)
+{
+	u8 v;
+	int ret;
+
+	/* First check that the device really is what its supposed to be */
+	ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
+			BQ24190_REG_VPRS_PN_MASK,
+			BQ24190_REG_VPRS_PN_SHIFT,
+			&v);
+	if (ret < 0)
+		return ret;
+
+	switch (v) {
+	case BQ24190_REG_VPRS_PN_24190:
+	case BQ24190_REG_VPRS_PN_24192:
+	case BQ24190_REG_VPRS_PN_24192I:
+		break;
+	default:
+		dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
+		return -ENODEV;
+	}
+
+	ret = bq24190_register_reset(bdi);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_set_config(bdi);
+	if (ret < 0)
+		return ret;
+
+	return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+}
+
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+	const char * const s = "ti,system-minimum-microvolt";
+	struct power_supply_battery_info *info;
+	int v, idx;
+
+	idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
+	bdi->ichg_max = bq24190_ccc_ichg_values[idx];
+
+	idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
+	bdi->vreg_max = bq24190_cvc_vreg_values[idx];
+
+	if (device_property_read_u32(bdi->dev, s, &v) == 0) {
+		v /= 1000;
+		if (v >= BQ24190_REG_POC_SYS_MIN_MIN
+		 && v <= BQ24190_REG_POC_SYS_MIN_MAX)
+			bdi->sys_min = v;
+		else
+			dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
+	}
+
+	if (!power_supply_get_battery_info(bdi->charger, &info)) {
+		v = info->precharge_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
+		 && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
+			bdi->iprechg = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
+				 v);
+
+		v = info->charge_term_current_ua / 1000;
+		if (v >= BQ24190_REG_PCTCC_ITERM_MIN
+		 && v <= BQ24190_REG_PCTCC_ITERM_MAX)
+			bdi->iterm = v;
+		else
+			dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
+				 v);
+
+		/* These are optional, so no warning when not set */
+		v = info->constant_charge_current_max_ua;
+		if (v >= bq24190_ccc_ichg_values[0] && v <= bdi->ichg_max)
+			bdi->ichg = bdi->ichg_max = v;
+
+		v = info->constant_charge_voltage_max_uv;
+		if (v >= bq24190_cvc_vreg_values[0] && v <= bdi->vreg_max)
+			bdi->vreg = bdi->vreg_max = v;
+	}
+
+	return 0;
+}
+
+static int bq24190_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct power_supply_config charger_cfg = {}, battery_cfg = {};
+	struct bq24190_dev_info *bdi;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
+	if (!bdi) {
+		dev_err(dev, "Can't alloc bdi struct\n");
+		return -ENOMEM;
+	}
+
+	bdi->client = client;
+	bdi->dev = dev;
+	strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
+	mutex_init(&bdi->f_reg_lock);
+	bdi->charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+	INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+			  bq24190_input_current_limit_work);
+
+	i2c_set_clientdata(client, bdi);
+
+	if (client->irq <= 0) {
+		dev_err(dev, "Can't get irq info\n");
+		return -EINVAL;
+	}
+
+	bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable);
+	if (IS_ERR(bdi->edev))
+		return PTR_ERR(bdi->edev);
+
+	ret = devm_extcon_dev_register(dev, bdi->edev);
+	if (ret < 0)
+		return ret;
+
+	pm_runtime_enable(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, 600);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get failed: %i\n", ret);
+		goto out_pmrt;
+	}
+
+#ifdef CONFIG_SYSFS
+	bq24190_sysfs_init_attrs();
+	charger_cfg.attr_grp = bq24190_sysfs_groups;
+#endif
+
+	charger_cfg.drv_data = bdi;
+	charger_cfg.of_node = dev->of_node;
+	charger_cfg.supplied_to = bq24190_charger_supplied_to;
+	charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to);
+	bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
+						&charger_cfg);
+	if (IS_ERR(bdi->charger)) {
+		dev_err(dev, "Can't register charger\n");
+		ret = PTR_ERR(bdi->charger);
+		goto out_pmrt;
+	}
+
+	/* the battery class is deprecated and will be removed. */
+	/* in the interim, this property hides it.              */
+	if (!device_property_read_bool(dev, "omit-battery-class")) {
+		battery_cfg.drv_data = bdi;
+		bdi->battery = power_supply_register(dev, &bq24190_battery_desc,
+						     &battery_cfg);
+		if (IS_ERR(bdi->battery)) {
+			dev_err(dev, "Can't register battery\n");
+			ret = PTR_ERR(bdi->battery);
+			goto out_charger;
+		}
+	}
+
+	ret = bq24190_get_config(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't get devicetree config\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_hw_init(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Hardware init failed\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg);
+	if (ret < 0)
+		goto out_charger;
+
+	bdi->initialized = true;
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+			bq24190_irq_handler_thread,
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"bq24190-charger", bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't set up irq handler\n");
+		goto out_charger;
+	}
+
+	ret = bq24190_register_vbus_regulator(bdi);
+	if (ret < 0)
+		goto out_charger;
+
+	enable_irq_wake(client->irq);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+
+out_charger:
+	if (!IS_ERR_OR_NULL(bdi->battery))
+		power_supply_unregister(bdi->battery);
+	power_supply_unregister(bdi->charger);
+
+out_pmrt:
+	pm_runtime_put_sync(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+	return ret;
+}
+
+static void bq24190_remove(struct i2c_client *client)
+{
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	cancel_delayed_work_sync(&bdi->input_current_limit_work);
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+	if (bdi->battery)
+		power_supply_unregister(bdi->battery);
+	power_supply_unregister(bdi->charger);
+	if (error >= 0)
+		pm_runtime_put_sync(bdi->dev);
+	pm_runtime_dont_use_autosuspend(bdi->dev);
+	pm_runtime_disable(bdi->dev);
+}
+
+static void bq24190_shutdown(struct i2c_client *client)
+{
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	/* Turn off 5V boost regulator on shutdown */
+	bq24190_set_otg_vbus(bdi, false);
+}
+
+static __maybe_unused int bq24190_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	if (!bdi->initialized)
+		return 0;
+
+	dev_dbg(bdi->dev, "%s\n", __func__);
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	if (!bdi->initialized)
+		return 0;
+
+	if (!bdi->irq_event) {
+		dev_dbg(bdi->dev, "checking events on possible wakeirq\n");
+		bq24190_check_status(bdi);
+	}
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_pm_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+
+	if (error >= 0) {
+		pm_runtime_mark_last_busy(bdi->dev);
+		pm_runtime_put_autosuspend(bdi->dev);
+	}
+
+	return 0;
+}
+
+static __maybe_unused int bq24190_pm_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+	int error;
+
+	bdi->f_reg = 0;
+	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+	bq24190_register_reset(bdi);
+	bq24190_set_config(bdi);
+	bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+
+	if (error >= 0) {
+		pm_runtime_mark_last_busy(bdi->dev);
+		pm_runtime_put_autosuspend(bdi->dev);
+	}
+
+	/* Things may have changed while suspended so alert upper layer */
+	power_supply_changed(bdi->charger);
+	if (bdi->battery)
+		power_supply_changed(bdi->battery);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bq24190_pm_ops = {
+	SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume)
+};
+
+static const struct i2c_device_id bq24190_i2c_ids[] = {
+	{ "bq24190" },
+	{ "bq24192" },
+	{ "bq24192i" },
+	{ "bq24196" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
+
+static const struct of_device_id bq24190_of_match[] = {
+	{ .compatible = "ti,bq24190", },
+	{ .compatible = "ti,bq24192", },
+	{ .compatible = "ti,bq24192i", },
+	{ .compatible = "ti,bq24196", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq24190_of_match);
+
+static struct i2c_driver bq24190_driver = {
+	.probe		= bq24190_probe,
+	.remove		= bq24190_remove,
+	.shutdown	= bq24190_shutdown,
+	.id_table	= bq24190_i2c_ids,
+	.driver = {
+		.name		= "bq24190-charger",
+		.pm		= &bq24190_pm_ops,
+		.of_match_table	= bq24190_of_match,
+	},
+};
+module_i2c_driver(bq24190_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_DESCRIPTION("TI BQ24190 Charger Driver");
diff --git a/drivers/power/supply/bq24257_charger.c b/drivers/power/supply/bq24257_charger.c
new file mode 100644
index 000000000..a309bbedf
--- /dev/null
+++ b/drivers/power/supply/bq24257_charger.c
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI BQ24257 charger driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq24250
+ * https://www.ti.com/product/bq24251
+ * https://www.ti.com/product/bq24257
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+#define BQ24257_REG_1			0x00
+#define BQ24257_REG_2			0x01
+#define BQ24257_REG_3			0x02
+#define BQ24257_REG_4			0x03
+#define BQ24257_REG_5			0x04
+#define BQ24257_REG_6			0x05
+#define BQ24257_REG_7			0x06
+
+#define BQ24257_MANUFACTURER		"Texas Instruments"
+#define BQ24257_PG_GPIO			"pg"
+
+#define BQ24257_ILIM_SET_DELAY		1000	/* msec */
+
+/*
+ * When adding support for new devices make sure that enum bq2425x_chip and
+ * bq2425x_chip_name[] always stay in sync!
+ */
+enum bq2425x_chip {
+	BQ24250,
+	BQ24251,
+	BQ24257,
+};
+
+static const char *const bq2425x_chip_name[] = {
+	"bq24250",
+	"bq24251",
+	"bq24257",
+};
+
+enum bq24257_fields {
+	F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT,			    /* REG 1 */
+	F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE,  /* REG 2 */
+	F_VBAT, F_USB_DET,					    /* REG 3 */
+	F_ICHG, F_ITERM,					    /* REG 4 */
+	F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
+	F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_EN, F_TS_STAT,	    /* REG 6 */
+	F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM,		    /* REG 7 */
+
+	F_MAX_FIELDS
+};
+
+/* initial field values, converted from uV/uA */
+struct bq24257_init_data {
+	u8 ichg;	/* charge current      */
+	u8 vbat;	/* regulation voltage  */
+	u8 iterm;	/* termination current */
+	u8 iilimit;	/* input current limit */
+	u8 vovp;	/* over voltage protection voltage */
+	u8 vindpm;	/* VDMP input threshold voltage */
+};
+
+struct bq24257_state {
+	u8 status;
+	u8 fault;
+	bool power_good;
+};
+
+struct bq24257_device {
+	struct i2c_client *client;
+	struct device *dev;
+	struct power_supply *charger;
+
+	enum bq2425x_chip chip;
+
+	struct regmap *rmap;
+	struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+	struct gpio_desc *pg;
+
+	struct delayed_work iilimit_setup_work;
+
+	struct bq24257_init_data init_data;
+	struct bq24257_state state;
+
+	struct mutex lock; /* protect state data */
+
+	bool iilimit_autoset_enable;
+};
+
+static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BQ24257_REG_2:
+	case BQ24257_REG_4:
+		return false;
+
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config bq24257_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ24257_REG_7,
+	.cache_type = REGCACHE_RBTREE,
+
+	.volatile_reg = bq24257_is_volatile_reg,
+};
+
+static const struct reg_field bq24257_reg_fields[] = {
+	/* REG 1 */
+	[F_WD_FAULT]		= REG_FIELD(BQ24257_REG_1, 7, 7),
+	[F_WD_EN]		= REG_FIELD(BQ24257_REG_1, 6, 6),
+	[F_STAT]		= REG_FIELD(BQ24257_REG_1, 4, 5),
+	[F_FAULT]		= REG_FIELD(BQ24257_REG_1, 0, 3),
+	/* REG 2 */
+	[F_RESET]		= REG_FIELD(BQ24257_REG_2, 7, 7),
+	[F_IILIMIT]		= REG_FIELD(BQ24257_REG_2, 4, 6),
+	[F_EN_STAT]		= REG_FIELD(BQ24257_REG_2, 3, 3),
+	[F_EN_TERM]		= REG_FIELD(BQ24257_REG_2, 2, 2),
+	[F_CE]			= REG_FIELD(BQ24257_REG_2, 1, 1),
+	[F_HZ_MODE]		= REG_FIELD(BQ24257_REG_2, 0, 0),
+	/* REG 3 */
+	[F_VBAT]		= REG_FIELD(BQ24257_REG_3, 2, 7),
+	[F_USB_DET]		= REG_FIELD(BQ24257_REG_3, 0, 1),
+	/* REG 4 */
+	[F_ICHG]		= REG_FIELD(BQ24257_REG_4, 3, 7),
+	[F_ITERM]		= REG_FIELD(BQ24257_REG_4, 0, 2),
+	/* REG 5 */
+	[F_LOOP_STATUS]		= REG_FIELD(BQ24257_REG_5, 6, 7),
+	[F_LOW_CHG]		= REG_FIELD(BQ24257_REG_5, 5, 5),
+	[F_DPDM_EN]		= REG_FIELD(BQ24257_REG_5, 4, 4),
+	[F_CE_STATUS]		= REG_FIELD(BQ24257_REG_5, 3, 3),
+	[F_VINDPM]		= REG_FIELD(BQ24257_REG_5, 0, 2),
+	/* REG 6 */
+	[F_X2_TMR_EN]		= REG_FIELD(BQ24257_REG_6, 7, 7),
+	[F_TMR]			= REG_FIELD(BQ24257_REG_6, 5, 6),
+	[F_SYSOFF]		= REG_FIELD(BQ24257_REG_6, 4, 4),
+	[F_TS_EN]		= REG_FIELD(BQ24257_REG_6, 3, 3),
+	[F_TS_STAT]		= REG_FIELD(BQ24257_REG_6, 0, 2),
+	/* REG 7 */
+	[F_VOVP]		= REG_FIELD(BQ24257_REG_7, 5, 7),
+	[F_CLR_VDP]		= REG_FIELD(BQ24257_REG_7, 4, 4),
+	[F_FORCE_BATDET]	= REG_FIELD(BQ24257_REG_7, 3, 3),
+	[F_FORCE_PTM]		= REG_FIELD(BQ24257_REG_7, 2, 2)
+};
+
+static const u32 bq24257_vbat_map[] = {
+	3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
+	3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
+	3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
+	3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
+	4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
+	4300000, 4320000, 4340000, 4360000, 4380000, 4400000, 4420000, 4440000
+};
+
+#define BQ24257_VBAT_MAP_SIZE		ARRAY_SIZE(bq24257_vbat_map)
+
+static const u32 bq24257_ichg_map[] = {
+	500000, 550000, 600000, 650000, 700000, 750000, 800000, 850000, 900000,
+	950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000,
+	1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
+	1750000, 1800000, 1850000, 1900000, 1950000, 2000000
+};
+
+#define BQ24257_ICHG_MAP_SIZE		ARRAY_SIZE(bq24257_ichg_map)
+
+static const u32 bq24257_iterm_map[] = {
+	50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000
+};
+
+#define BQ24257_ITERM_MAP_SIZE		ARRAY_SIZE(bq24257_iterm_map)
+
+static const u32 bq24257_iilimit_map[] = {
+	100000, 150000, 500000, 900000, 1500000, 2000000
+};
+
+#define BQ24257_IILIMIT_MAP_SIZE	ARRAY_SIZE(bq24257_iilimit_map)
+
+static const u32 bq24257_vovp_map[] = {
+	6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
+	10500000
+};
+
+#define BQ24257_VOVP_MAP_SIZE		ARRAY_SIZE(bq24257_vovp_map)
+
+static const u32 bq24257_vindpm_map[] = {
+	4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+	4760000
+};
+
+#define BQ24257_VINDPM_MAP_SIZE		ARRAY_SIZE(bq24257_vindpm_map)
+
+static int bq24257_field_read(struct bq24257_device *bq,
+			      enum bq24257_fields field_id)
+{
+	int ret;
+	int val;
+
+	ret = regmap_field_read(bq->rmap_fields[field_id], &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static int bq24257_field_write(struct bq24257_device *bq,
+			       enum bq24257_fields field_id, u8 val)
+{
+	return regmap_field_write(bq->rmap_fields[field_id], val);
+}
+
+static u8 bq24257_find_idx(u32 value, const u32 *map, u8 map_size)
+{
+	u8 idx;
+
+	for (idx = 1; idx < map_size; idx++)
+		if (value < map[idx])
+			break;
+
+	return idx - 1;
+}
+
+enum bq24257_status {
+	STATUS_READY,
+	STATUS_CHARGE_IN_PROGRESS,
+	STATUS_CHARGE_DONE,
+	STATUS_FAULT,
+};
+
+enum bq24257_fault {
+	FAULT_NORMAL,
+	FAULT_INPUT_OVP,
+	FAULT_INPUT_UVLO,
+	FAULT_SLEEP,
+	FAULT_BAT_TS,
+	FAULT_BAT_OVP,
+	FAULT_TS,
+	FAULT_TIMER,
+	FAULT_NO_BAT,
+	FAULT_ISET,
+	FAULT_INPUT_LDO_LOW,
+};
+
+static int bq24257_get_input_current_limit(struct bq24257_device *bq,
+					   union power_supply_propval *val)
+{
+	int ret;
+
+	ret = bq24257_field_read(bq, F_IILIMIT);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The "External ILIM" and "Production & Test" modes are not exposed
+	 * through this driver and not being covered by the lookup table.
+	 * Should such a mode have become active let's return an error rather
+	 * than exceeding the bounds of the lookup table and returning
+	 * garbage.
+	 */
+	if (ret >= BQ24257_IILIMIT_MAP_SIZE)
+		return -ENODATA;
+
+	val->intval = bq24257_iilimit_map[ret];
+
+	return 0;
+}
+
+static int bq24257_set_input_current_limit(struct bq24257_device *bq,
+					const union power_supply_propval *val)
+{
+	/*
+	 * Address the case where the user manually sets an input current limit
+	 * while the charger auto-detection mechanism is active. In this
+	 * case we want to abort and go straight to the user-specified value.
+	 */
+	if (bq->iilimit_autoset_enable)
+		cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+	return bq24257_field_write(bq, F_IILIMIT,
+				   bq24257_find_idx(val->intval,
+						    bq24257_iilimit_map,
+						    BQ24257_IILIMIT_MAP_SIZE));
+}
+
+static int bq24257_power_supply_get_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     union power_supply_propval *val)
+{
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+	struct bq24257_state state;
+
+	mutex_lock(&bq->lock);
+	state = bq->state;
+	mutex_unlock(&bq->lock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!state.power_good)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (state.status == STATUS_READY)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (state.status == STATUS_CHARGE_IN_PROGRESS)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (state.status == STATUS_CHARGE_DONE)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ24257_MANUFACTURER;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq2425x_chip_name[bq->chip];
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = state.power_good;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		switch (state.fault) {
+		case FAULT_NORMAL:
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+
+		case FAULT_INPUT_OVP:
+		case FAULT_BAT_OVP:
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+			break;
+
+		case FAULT_TS:
+		case FAULT_BAT_TS:
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+
+		case FAULT_TIMER:
+			val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			break;
+
+		default:
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+			break;
+		}
+
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		val->intval = bq24257_ichg_map[bq->init_data.ichg];
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = bq24257_ichg_map[BQ24257_ICHG_MAP_SIZE - 1];
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = bq24257_vbat_map[bq->init_data.vbat];
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = bq24257_vbat_map[BQ24257_VBAT_MAP_SIZE - 1];
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		val->intval = bq24257_iterm_map[bq->init_data.iterm];
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return bq24257_get_input_current_limit(bq, val);
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq24257_power_supply_set_property(struct power_supply *psy,
+					enum power_supply_property prop,
+					const union power_supply_propval *val)
+{
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return bq24257_set_input_current_limit(bq, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bq24257_power_supply_property_is_writeable(struct power_supply *psy,
+					enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int bq24257_get_chip_state(struct bq24257_device *bq,
+				  struct bq24257_state *state)
+{
+	int ret;
+
+	ret = bq24257_field_read(bq, F_STAT);
+	if (ret < 0)
+		return ret;
+
+	state->status = ret;
+
+	ret = bq24257_field_read(bq, F_FAULT);
+	if (ret < 0)
+		return ret;
+
+	state->fault = ret;
+
+	if (bq->pg)
+		state->power_good = !gpiod_get_value_cansleep(bq->pg);
+	else
+		/*
+		 * If we have a chip without a dedicated power-good GPIO or
+		 * some other explicit bit that would provide this information
+		 * assume the power is good if there is no supply related
+		 * fault - and not good otherwise. There is a possibility for
+		 * other errors to mask that power in fact is not good but this
+		 * is probably the best we can do here.
+		 */
+		switch (state->fault) {
+		case FAULT_INPUT_OVP:
+		case FAULT_INPUT_UVLO:
+		case FAULT_INPUT_LDO_LOW:
+			state->power_good = false;
+			break;
+		default:
+			state->power_good = true;
+		}
+
+	return 0;
+}
+
+static bool bq24257_state_changed(struct bq24257_device *bq,
+				  struct bq24257_state *new_state)
+{
+	int ret;
+
+	mutex_lock(&bq->lock);
+	ret = (bq->state.status != new_state->status ||
+	       bq->state.fault != new_state->fault ||
+	       bq->state.power_good != new_state->power_good);
+	mutex_unlock(&bq->lock);
+
+	return ret;
+}
+
+enum bq24257_loop_status {
+	LOOP_STATUS_NONE,
+	LOOP_STATUS_IN_DPM,
+	LOOP_STATUS_IN_CURRENT_LIMIT,
+	LOOP_STATUS_THERMAL,
+};
+
+enum bq24257_in_ilimit {
+	IILIMIT_100,
+	IILIMIT_150,
+	IILIMIT_500,
+	IILIMIT_900,
+	IILIMIT_1500,
+	IILIMIT_2000,
+	IILIMIT_EXT,
+	IILIMIT_NONE,
+};
+
+enum bq24257_vovp {
+	VOVP_6000,
+	VOVP_6500,
+	VOVP_7000,
+	VOVP_8000,
+	VOVP_9000,
+	VOVP_9500,
+	VOVP_10000,
+	VOVP_10500
+};
+
+enum bq24257_vindpm {
+	VINDPM_4200,
+	VINDPM_4280,
+	VINDPM_4360,
+	VINDPM_4440,
+	VINDPM_4520,
+	VINDPM_4600,
+	VINDPM_4680,
+	VINDPM_4760
+};
+
+enum bq24257_port_type {
+	PORT_TYPE_DCP,		/* Dedicated Charging Port */
+	PORT_TYPE_CDP,		/* Charging Downstream Port */
+	PORT_TYPE_SDP,		/* Standard Downstream Port */
+	PORT_TYPE_NON_STANDARD,
+};
+
+enum bq24257_safety_timer {
+	SAFETY_TIMER_45,
+	SAFETY_TIMER_360,
+	SAFETY_TIMER_540,
+	SAFETY_TIMER_NONE,
+};
+
+static int bq24257_iilimit_autoset(struct bq24257_device *bq)
+{
+	int loop_status;
+	int iilimit;
+	int port_type;
+	int ret;
+	const u8 new_iilimit[] = {
+		[PORT_TYPE_DCP] = IILIMIT_2000,
+		[PORT_TYPE_CDP] = IILIMIT_2000,
+		[PORT_TYPE_SDP] = IILIMIT_500,
+		[PORT_TYPE_NON_STANDARD] = IILIMIT_500
+	};
+
+	ret = bq24257_field_read(bq, F_LOOP_STATUS);
+	if (ret < 0)
+		goto error;
+
+	loop_status = ret;
+
+	ret = bq24257_field_read(bq, F_IILIMIT);
+	if (ret < 0)
+		goto error;
+
+	iilimit = ret;
+
+	/*
+	 * All USB ports should be able to handle 500mA. If not, DPM will lower
+	 * the charging current to accommodate the power source. No need to set
+	 * a lower IILIMIT value.
+	 */
+	if (loop_status == LOOP_STATUS_IN_DPM && iilimit == IILIMIT_500)
+		return 0;
+
+	ret = bq24257_field_read(bq, F_USB_DET);
+	if (ret < 0)
+		goto error;
+
+	port_type = ret;
+
+	ret = bq24257_field_write(bq, F_IILIMIT, new_iilimit[port_type]);
+	if (ret < 0)
+		goto error;
+
+	ret = bq24257_field_write(bq, F_TMR, SAFETY_TIMER_360);
+	if (ret < 0)
+		goto error;
+
+	ret = bq24257_field_write(bq, F_CLR_VDP, 1);
+	if (ret < 0)
+		goto error;
+
+	dev_dbg(bq->dev, "port/loop = %d/%d -> iilimit = %d\n",
+		port_type, loop_status, new_iilimit[port_type]);
+
+	return 0;
+
+error:
+	dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
+	return ret;
+}
+
+static void bq24257_iilimit_setup_work(struct work_struct *work)
+{
+	struct bq24257_device *bq = container_of(work, struct bq24257_device,
+						 iilimit_setup_work.work);
+
+	bq24257_iilimit_autoset(bq);
+}
+
+static void bq24257_handle_state_change(struct bq24257_device *bq,
+					struct bq24257_state *new_state)
+{
+	int ret;
+	struct bq24257_state old_state;
+
+	mutex_lock(&bq->lock);
+	old_state = bq->state;
+	mutex_unlock(&bq->lock);
+
+	/*
+	 * Handle BQ2425x state changes observing whether the D+/D- based input
+	 * current limit autoset functionality is enabled.
+	 */
+	if (!new_state->power_good) {
+		dev_dbg(bq->dev, "Power removed\n");
+		if (bq->iilimit_autoset_enable) {
+			cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+			/* activate D+/D- port detection algorithm */
+			ret = bq24257_field_write(bq, F_DPDM_EN, 1);
+			if (ret < 0)
+				goto error;
+		}
+		/*
+		 * When power is removed always return to the default input
+		 * current limit as configured during probe.
+		 */
+		ret = bq24257_field_write(bq, F_IILIMIT, bq->init_data.iilimit);
+		if (ret < 0)
+			goto error;
+	} else if (!old_state.power_good) {
+		dev_dbg(bq->dev, "Power inserted\n");
+
+		if (bq->iilimit_autoset_enable)
+			/* configure input current limit */
+			schedule_delayed_work(&bq->iilimit_setup_work,
+				      msecs_to_jiffies(BQ24257_ILIM_SET_DELAY));
+	} else if (new_state->fault == FAULT_NO_BAT) {
+		dev_warn(bq->dev, "Battery removed\n");
+	} else if (new_state->fault == FAULT_TIMER) {
+		dev_err(bq->dev, "Safety timer expired! Battery dead?\n");
+	}
+
+	return;
+
+error:
+	dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
+}
+
+static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
+{
+	int ret;
+	struct bq24257_device *bq = private;
+	struct bq24257_state state;
+
+	ret = bq24257_get_chip_state(bq, &state);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (!bq24257_state_changed(bq, &state))
+		return IRQ_HANDLED;
+
+	dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
+		state.status, state.fault, state.power_good);
+
+	bq24257_handle_state_change(bq, &state);
+
+	mutex_lock(&bq->lock);
+	bq->state = state;
+	mutex_unlock(&bq->lock);
+
+	power_supply_changed(bq->charger);
+
+	return IRQ_HANDLED;
+}
+
+static int bq24257_hw_init(struct bq24257_device *bq)
+{
+	int ret;
+	int i;
+	struct bq24257_state state;
+
+	const struct {
+		int field;
+		u32 value;
+	} init_data[] = {
+		{F_ICHG, bq->init_data.ichg},
+		{F_VBAT, bq->init_data.vbat},
+		{F_ITERM, bq->init_data.iterm},
+		{F_VOVP, bq->init_data.vovp},
+		{F_VINDPM, bq->init_data.vindpm},
+	};
+
+	/*
+	 * Disable the watchdog timer to prevent the IC from going back to
+	 * default settings after 50 seconds of I2C inactivity.
+	 */
+	ret = bq24257_field_write(bq, F_WD_EN, 0);
+	if (ret < 0)
+		return ret;
+
+	/* configure the charge currents and voltages */
+	for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+		ret = bq24257_field_write(bq, init_data[i].field,
+					  init_data[i].value);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = bq24257_get_chip_state(bq, &state);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&bq->lock);
+	bq->state = state;
+	mutex_unlock(&bq->lock);
+
+	if (!bq->iilimit_autoset_enable) {
+		dev_dbg(bq->dev, "manually setting iilimit = %u\n",
+			bq->init_data.iilimit);
+
+		/* program fixed input current limit */
+		ret = bq24257_field_write(bq, F_IILIMIT,
+					  bq->init_data.iilimit);
+		if (ret < 0)
+			return ret;
+	} else if (!state.power_good)
+		/* activate D+/D- detection algorithm */
+		ret = bq24257_field_write(bq, F_DPDM_EN, 1);
+	else if (state.fault != FAULT_NO_BAT)
+		ret = bq24257_iilimit_autoset(bq);
+
+	return ret;
+}
+
+static enum power_supply_property bq24257_power_supply_props[] = {
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static char *bq24257_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static const struct power_supply_desc bq24257_power_supply_desc = {
+	.name = "bq24257-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = bq24257_power_supply_props,
+	.num_properties = ARRAY_SIZE(bq24257_power_supply_props),
+	.get_property = bq24257_power_supply_get_property,
+	.set_property = bq24257_power_supply_set_property,
+	.property_is_writeable = bq24257_power_supply_property_is_writeable,
+};
+
+static ssize_t bq24257_show_ovp_voltage(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n",
+			 bq24257_vovp_map[bq->init_data.vovp]);
+}
+
+static ssize_t bq24257_show_in_dpm_voltage(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n",
+			 bq24257_vindpm_map[bq->init_data.vindpm]);
+}
+
+static ssize_t bq24257_sysfs_show_enable(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+	int ret;
+
+	if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		ret = bq24257_field_read(bq, F_HZ_MODE);
+	else if (strcmp(attr->attr.name, "sysoff_enable") == 0)
+		ret = bq24257_field_read(bq, F_SYSOFF);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+static ssize_t bq24257_sysfs_set_enable(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24257_device *bq = power_supply_get_drvdata(psy);
+	long val;
+	int ret;
+
+	if (kstrtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+		ret = bq24257_field_write(bq, F_HZ_MODE, (bool)val);
+	else if (strcmp(attr->attr.name, "sysoff_enable") == 0)
+		ret = bq24257_field_write(bq, F_SYSOFF, (bool)val);
+	else
+		return -EINVAL;
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(ovp_voltage, S_IRUGO, bq24257_show_ovp_voltage, NULL);
+static DEVICE_ATTR(in_dpm_voltage, S_IRUGO, bq24257_show_in_dpm_voltage, NULL);
+static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
+		   bq24257_sysfs_show_enable, bq24257_sysfs_set_enable);
+static DEVICE_ATTR(sysoff_enable, S_IWUSR | S_IRUGO,
+		   bq24257_sysfs_show_enable, bq24257_sysfs_set_enable);
+
+static struct attribute *bq24257_charger_sysfs_attrs[] = {
+	&dev_attr_ovp_voltage.attr,
+	&dev_attr_in_dpm_voltage.attr,
+	&dev_attr_high_impedance_enable.attr,
+	&dev_attr_sysoff_enable.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(bq24257_charger_sysfs);
+
+static int bq24257_power_supply_init(struct bq24257_device *bq)
+{
+	struct power_supply_config psy_cfg = { .drv_data = bq, };
+
+	psy_cfg.attr_grp = bq24257_charger_sysfs_groups;
+	psy_cfg.supplied_to = bq24257_charger_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to);
+
+	bq->charger = devm_power_supply_register(bq->dev,
+						 &bq24257_power_supply_desc,
+						 &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(bq->charger);
+}
+
+static void bq24257_pg_gpio_probe(struct bq24257_device *bq)
+{
+	bq->pg = devm_gpiod_get_optional(bq->dev, BQ24257_PG_GPIO, GPIOD_IN);
+
+	if (PTR_ERR(bq->pg) == -EPROBE_DEFER) {
+		dev_info(bq->dev, "probe retry requested for PG pin\n");
+		return;
+	} else if (IS_ERR(bq->pg)) {
+		dev_err(bq->dev, "error probing PG pin\n");
+		bq->pg = NULL;
+		return;
+	}
+
+	if (bq->pg)
+		dev_dbg(bq->dev, "probed PG pin = %d\n", desc_to_gpio(bq->pg));
+}
+
+static int bq24257_fw_probe(struct bq24257_device *bq)
+{
+	int ret;
+	u32 property;
+
+	/* Required properties */
+	ret = device_property_read_u32(bq->dev, "ti,charge-current", &property);
+	if (ret < 0)
+		return ret;
+
+	bq->init_data.ichg = bq24257_find_idx(property, bq24257_ichg_map,
+					      BQ24257_ICHG_MAP_SIZE);
+
+	ret = device_property_read_u32(bq->dev, "ti,battery-regulation-voltage",
+				       &property);
+	if (ret < 0)
+		return ret;
+
+	bq->init_data.vbat = bq24257_find_idx(property, bq24257_vbat_map,
+					      BQ24257_VBAT_MAP_SIZE);
+
+	ret = device_property_read_u32(bq->dev, "ti,termination-current",
+				       &property);
+	if (ret < 0)
+		return ret;
+
+	bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map,
+					       BQ24257_ITERM_MAP_SIZE);
+
+	/* Optional properties. If not provided use reasonable default. */
+	ret = device_property_read_u32(bq->dev, "ti,current-limit",
+				       &property);
+	if (ret < 0) {
+		bq->iilimit_autoset_enable = true;
+
+		/*
+		 * Explicitly set a default value which will be needed for
+		 * devices that don't support the automatic setting of the input
+		 * current limit through the charger type detection mechanism.
+		 */
+		bq->init_data.iilimit = IILIMIT_500;
+	} else
+		bq->init_data.iilimit =
+				bq24257_find_idx(property,
+						 bq24257_iilimit_map,
+						 BQ24257_IILIMIT_MAP_SIZE);
+
+	ret = device_property_read_u32(bq->dev, "ti,ovp-voltage",
+				       &property);
+	if (ret < 0)
+		bq->init_data.vovp = VOVP_6500;
+	else
+		bq->init_data.vovp = bq24257_find_idx(property,
+						      bq24257_vovp_map,
+						      BQ24257_VOVP_MAP_SIZE);
+
+	ret = device_property_read_u32(bq->dev, "ti,in-dpm-voltage",
+				       &property);
+	if (ret < 0)
+		bq->init_data.vindpm = VINDPM_4360;
+	else
+		bq->init_data.vindpm =
+				bq24257_find_idx(property,
+						 bq24257_vindpm_map,
+						 BQ24257_VINDPM_MAP_SIZE);
+
+	return 0;
+}
+
+static int bq24257_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	const struct acpi_device_id *acpi_id;
+	struct bq24257_device *bq;
+	int ret;
+	int i;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq)
+		return -ENOMEM;
+
+	bq->client = client;
+	bq->dev = dev;
+
+	if (ACPI_HANDLE(dev)) {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table,
+					    &client->dev);
+		if (!acpi_id) {
+			dev_err(dev, "Failed to match ACPI device\n");
+			return -ENODEV;
+		}
+		bq->chip = (enum bq2425x_chip)acpi_id->driver_data;
+	} else {
+		bq->chip = (enum bq2425x_chip)id->driver_data;
+	}
+
+	mutex_init(&bq->lock);
+
+	bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
+	if (IS_ERR(bq->rmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(bq->rmap);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(bq24257_reg_fields); i++) {
+		const struct reg_field *reg_fields = bq24257_reg_fields;
+
+		bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
+							     reg_fields[i]);
+		if (IS_ERR(bq->rmap_fields[i])) {
+			dev_err(dev, "cannot allocate regmap field\n");
+			return PTR_ERR(bq->rmap_fields[i]);
+		}
+	}
+
+	i2c_set_clientdata(client, bq);
+
+	if (!dev->platform_data) {
+		ret = bq24257_fw_probe(bq);
+		if (ret < 0) {
+			dev_err(dev, "Cannot read device properties.\n");
+			return ret;
+		}
+	} else {
+		return -ENODEV;
+	}
+
+	/*
+	 * The BQ24250 doesn't support the D+/D- based charger type detection
+	 * used for the automatic setting of the input current limit setting so
+	 * explicitly disable that feature.
+	 */
+	if (bq->chip == BQ24250)
+		bq->iilimit_autoset_enable = false;
+
+	if (bq->iilimit_autoset_enable)
+		INIT_DELAYED_WORK(&bq->iilimit_setup_work,
+				  bq24257_iilimit_setup_work);
+
+	/*
+	 * The BQ24250 doesn't have a dedicated Power Good (PG) pin so let's
+	 * not probe for it and instead use a SW-based approach to determine
+	 * the PG state. We also use a SW-based approach for all other devices
+	 * if the PG pin is either not defined or can't be probed.
+	 */
+	if (bq->chip != BQ24250)
+		bq24257_pg_gpio_probe(bq);
+
+	if (PTR_ERR(bq->pg) == -EPROBE_DEFER)
+		return PTR_ERR(bq->pg);
+	else if (!bq->pg)
+		dev_info(bq->dev, "using SW-based power-good detection\n");
+
+	/* reset all registers to defaults */
+	ret = bq24257_field_write(bq, F_RESET, 1);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Put the RESET bit back to 0, in cache. For some reason the HW always
+	 * returns 1 on this bit, so this is the only way to avoid resetting the
+	 * chip every time we update another field in this register.
+	 */
+	ret = bq24257_field_write(bq, F_RESET, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24257_hw_init(bq);
+	if (ret < 0) {
+		dev_err(dev, "Cannot initialize the chip.\n");
+		return ret;
+	}
+
+	ret = bq24257_power_supply_init(bq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register power supply\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					bq24257_irq_handler_thread,
+					IRQF_TRIGGER_FALLING |
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					bq2425x_chip_name[bq->chip], bq);
+	if (ret) {
+		dev_err(dev, "Failed to request IRQ #%d\n", client->irq);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void bq24257_remove(struct i2c_client *client)
+{
+	struct bq24257_device *bq = i2c_get_clientdata(client);
+
+	if (bq->iilimit_autoset_enable)
+		cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+	bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq24257_suspend(struct device *dev)
+{
+	struct bq24257_device *bq = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (bq->iilimit_autoset_enable)
+		cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+	/* reset all registers to default (and activate standalone mode) */
+	ret = bq24257_field_write(bq, F_RESET, 1);
+	if (ret < 0)
+		dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
+
+	return ret;
+}
+
+static int bq24257_resume(struct device *dev)
+{
+	int ret;
+	struct bq24257_device *bq = dev_get_drvdata(dev);
+
+	ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24257_field_write(bq, F_RESET, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24257_hw_init(bq);
+	if (ret < 0) {
+		dev_err(bq->dev, "Cannot init chip after resume.\n");
+		return ret;
+	}
+
+	/* signal userspace, maybe state changed while suspended */
+	power_supply_changed(bq->charger);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops bq24257_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(bq24257_suspend, bq24257_resume)
+};
+
+static const struct i2c_device_id bq24257_i2c_ids[] = {
+	{ "bq24250", BQ24250 },
+	{ "bq24251", BQ24251 },
+	{ "bq24257", BQ24257 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
+
+static const struct of_device_id bq24257_of_match[] = {
+	{ .compatible = "ti,bq24250", },
+	{ .compatible = "ti,bq24251", },
+	{ .compatible = "ti,bq24257", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq24257_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq24257_acpi_match[] = {
+	{ "BQ242500", BQ24250 },
+	{ "BQ242510", BQ24251 },
+	{ "BQ242570", BQ24257 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
+#endif
+
+static struct i2c_driver bq24257_driver = {
+	.driver = {
+		.name = "bq24257-charger",
+		.of_match_table = of_match_ptr(bq24257_of_match),
+		.acpi_match_table = ACPI_PTR(bq24257_acpi_match),
+		.pm = &bq24257_pm,
+	},
+	.probe = bq24257_probe,
+	.remove = bq24257_remove,
+	.id_table = bq24257_i2c_ids,
+};
+module_i2c_driver(bq24257_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("bq24257 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
new file mode 100644
index 000000000..3ce36d09c
--- /dev/null
+++ b/drivers/power/supply/bq24735-charger.c
@@ -0,0 +1,517 @@
+/*
+ * Battery charger driver for TI BQ24735
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/bq24735-charger.h>
+
+/* BQ24735 available commands and their respective masks */
+#define BQ24735_CHARGE_OPT		0x12
+#define BQ24735_CHARGE_CURRENT		0x14
+#define BQ24735_CHARGE_CURRENT_MASK	0x1fc0
+#define BQ24735_CHARGE_VOLTAGE		0x15
+#define BQ24735_CHARGE_VOLTAGE_MASK	0x7ff0
+#define BQ24735_INPUT_CURRENT		0x3f
+#define BQ24735_INPUT_CURRENT_MASK	0x1f80
+#define BQ24735_MANUFACTURER_ID		0xfe
+#define BQ24735_DEVICE_ID		0xff
+
+/* ChargeOptions bits of interest */
+#define BQ24735_CHARGE_OPT_CHG_DISABLE	(1 << 0)
+#define BQ24735_CHARGE_OPT_AC_PRESENT	(1 << 4)
+
+struct bq24735 {
+	struct power_supply		*charger;
+	struct power_supply_desc	charger_desc;
+	struct i2c_client		*client;
+	struct bq24735_platform		*pdata;
+	struct mutex			lock;
+	struct gpio_desc		*status_gpio;
+	struct delayed_work		poll;
+	u32				poll_interval;
+	bool				charging;
+};
+
+static inline struct bq24735 *to_bq24735(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static enum power_supply_property bq24735_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int bq24735_charger_property_is_writeable(struct power_supply *psy,
+						 enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static inline int bq24735_write_word(struct i2c_client *client, u8 reg,
+				     u16 value)
+{
+	return i2c_smbus_write_word_data(client, reg, value);
+}
+
+static inline int bq24735_read_word(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_word_data(client, reg);
+}
+
+static int bq24735_update_word(struct i2c_client *client, u8 reg,
+			       u16 mask, u16 value)
+{
+	unsigned int tmp;
+	int ret;
+
+	ret = bq24735_read_word(client, reg);
+	if (ret < 0)
+		return ret;
+
+	tmp = ret & ~mask;
+	tmp |= value & mask;
+
+	return bq24735_write_word(client, reg, tmp);
+}
+
+static int bq24735_config_charger(struct bq24735 *charger)
+{
+	struct bq24735_platform *pdata = charger->pdata;
+	int ret;
+	u16 value;
+
+	if (pdata->ext_control)
+		return 0;
+
+	if (pdata->charge_current) {
+		value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_CHARGE_CURRENT, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write charger current : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (pdata->charge_voltage) {
+		value = pdata->charge_voltage & BQ24735_CHARGE_VOLTAGE_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_CHARGE_VOLTAGE, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write charger voltage : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (pdata->input_current) {
+		value = pdata->input_current & BQ24735_INPUT_CURRENT_MASK;
+
+		ret = bq24735_write_word(charger->client,
+					 BQ24735_INPUT_CURRENT, value);
+		if (ret < 0) {
+			dev_err(&charger->client->dev,
+				"Failed to write input current : %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+	int ret;
+
+	if (charger->pdata->ext_control)
+		return 0;
+
+	ret = bq24735_config_charger(charger);
+	if (ret)
+		return ret;
+
+	return bq24735_update_word(charger->client, BQ24735_CHARGE_OPT,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE, 0);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+	if (charger->pdata->ext_control)
+		return 0;
+
+	return bq24735_update_word(charger->client, BQ24735_CHARGE_OPT,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE,
+				   BQ24735_CHARGE_OPT_CHG_DISABLE);
+}
+
+static bool bq24735_charger_is_present(struct bq24735 *charger)
+{
+	if (charger->status_gpio) {
+		return !gpiod_get_value_cansleep(charger->status_gpio);
+	} else {
+		int ac = 0;
+
+		ac = bq24735_read_word(charger->client, BQ24735_CHARGE_OPT);
+		if (ac < 0) {
+			dev_dbg(&charger->client->dev,
+				"Failed to read charger options : %d\n",
+				ac);
+			return false;
+		}
+		return (ac & BQ24735_CHARGE_OPT_AC_PRESENT) ? true : false;
+	}
+
+	return false;
+}
+
+static int bq24735_charger_is_charging(struct bq24735 *charger)
+{
+	int ret;
+
+	if (!bq24735_charger_is_present(charger))
+		return 0;
+
+	ret  = bq24735_read_word(charger->client, BQ24735_CHARGE_OPT);
+	if (ret < 0)
+		return ret;
+
+	return !(ret & BQ24735_CHARGE_OPT_CHG_DISABLE);
+}
+
+static void bq24735_update(struct bq24735 *charger)
+{
+	mutex_lock(&charger->lock);
+
+	if (charger->charging && bq24735_charger_is_present(charger))
+		bq24735_enable_charging(charger);
+	else
+		bq24735_disable_charging(charger);
+
+	mutex_unlock(&charger->lock);
+
+	power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+	struct power_supply *psy = devid;
+	struct bq24735 *charger = to_bq24735(psy);
+
+	bq24735_update(charger);
+
+	return IRQ_HANDLED;
+}
+
+static void bq24735_poll(struct work_struct *work)
+{
+	struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+	bq24735_update(charger);
+
+	schedule_delayed_work(&charger->poll,
+			      msecs_to_jiffies(charger->poll_interval));
+}
+
+static int bq24735_charger_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct bq24735 *charger = to_bq24735(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = bq24735_charger_is_present(charger) ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (bq24735_charger_is_charging(charger)) {
+		case 1:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq24735_charger_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct bq24735 *charger = to_bq24735(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = true;
+			ret = bq24735_enable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			break;
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = false;
+			ret = bq24735_disable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			break;
+		default:
+			return -EINVAL;
+		}
+		power_supply_changed(psy);
+		break;
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
+{
+	struct bq24735_platform *pdata;
+	struct device_node *np = client->dev.of_node;
+	u32 val;
+	int ret;
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&client->dev,
+			"Memory alloc for bq24735 pdata failed\n");
+		return NULL;
+	}
+
+	ret = of_property_read_u32(np, "ti,charge-current", &val);
+	if (!ret)
+		pdata->charge_current = val;
+
+	ret = of_property_read_u32(np, "ti,charge-voltage", &val);
+	if (!ret)
+		pdata->charge_voltage = val;
+
+	ret = of_property_read_u32(np, "ti,input-current", &val);
+	if (!ret)
+		pdata->input_current = val;
+
+	pdata->ext_control = of_property_read_bool(np, "ti,external-control");
+
+	return pdata;
+}
+
+static int bq24735_charger_probe(struct i2c_client *client,
+				 const struct i2c_device_id *id)
+{
+	int ret;
+	struct bq24735 *charger;
+	struct power_supply_desc *supply_desc;
+	struct power_supply_config psy_cfg = {};
+	char *name;
+
+	charger = devm_kzalloc(&client->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	mutex_init(&charger->lock);
+	charger->charging = true;
+	charger->pdata = client->dev.platform_data;
+
+	if (IS_ENABLED(CONFIG_OF) && !charger->pdata && client->dev.of_node)
+		charger->pdata = bq24735_parse_dt_data(client);
+
+	if (!charger->pdata) {
+		dev_err(&client->dev, "no platform data provided\n");
+		return -EINVAL;
+	}
+
+	name = (char *)charger->pdata->name;
+	if (!name) {
+		name = devm_kasprintf(&client->dev, GFP_KERNEL,
+				      "bq24735@%s",
+				      dev_name(&client->dev));
+		if (!name) {
+			dev_err(&client->dev, "Failed to alloc device name\n");
+			return -ENOMEM;
+		}
+	}
+
+	charger->client = client;
+
+	supply_desc = &charger->charger_desc;
+
+	supply_desc->name = name;
+	supply_desc->type = POWER_SUPPLY_TYPE_MAINS;
+	supply_desc->properties = bq24735_charger_properties;
+	supply_desc->num_properties = ARRAY_SIZE(bq24735_charger_properties);
+	supply_desc->get_property = bq24735_charger_get_property;
+	supply_desc->set_property = bq24735_charger_set_property;
+	supply_desc->property_is_writeable =
+				bq24735_charger_property_is_writeable;
+
+	psy_cfg.supplied_to = charger->pdata->supplied_to;
+	psy_cfg.num_supplicants = charger->pdata->num_supplicants;
+	psy_cfg.of_node = client->dev.of_node;
+	psy_cfg.drv_data = charger;
+
+	i2c_set_clientdata(client, charger);
+
+	charger->status_gpio = devm_gpiod_get_optional(&client->dev,
+						       "ti,ac-detect",
+						       GPIOD_IN);
+	if (IS_ERR(charger->status_gpio)) {
+		ret = PTR_ERR(charger->status_gpio);
+		dev_err(&client->dev, "Getting gpio failed: %d\n", ret);
+		return ret;
+	}
+
+	if (bq24735_charger_is_present(charger)) {
+		ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
+				ret);
+			return ret;
+		} else if (ret != 0x0040) {
+			dev_err(&client->dev,
+				"manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
+			return -ENODEV;
+		}
+
+		ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read device id : %d\n", ret);
+			return ret;
+		} else if (ret != 0x000B) {
+			dev_err(&client->dev,
+				"device id mismatch. 0x000b != 0x%04x\n", ret);
+			return -ENODEV;
+		}
+
+		ret = bq24735_enable_charging(charger);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to enable charging\n");
+			return ret;
+		}
+	}
+
+	charger->charger = devm_power_supply_register(&client->dev, supply_desc,
+						      &psy_cfg);
+	if (IS_ERR(charger->charger)) {
+		ret = PTR_ERR(charger->charger);
+		dev_err(&client->dev, "Failed to register power supply: %d\n",
+			ret);
+		return ret;
+	}
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, bq24735_charger_isr,
+						IRQF_TRIGGER_RISING |
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						supply_desc->name,
+						charger->charger);
+		if (ret) {
+			dev_err(&client->dev,
+				"Unable to register IRQ %d err %d\n",
+				client->irq, ret);
+			return ret;
+		}
+	} else {
+		ret = device_property_read_u32(&client->dev, "poll-interval",
+					       &charger->poll_interval);
+		if (ret)
+			return 0;
+		if (!charger->poll_interval)
+			return 0;
+
+		ret = devm_delayed_work_autocancel(&client->dev, &charger->poll,
+						   bq24735_poll);
+		if (ret)
+			return ret;
+
+		schedule_delayed_work(&charger->poll,
+				      msecs_to_jiffies(charger->poll_interval));
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bq24735_charger_id[] = {
+	{ "bq24735-charger", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, bq24735_charger_id);
+
+static const struct of_device_id bq24735_match_ids[] = {
+	{ .compatible = "ti,bq24735", },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, bq24735_match_ids);
+
+static struct i2c_driver bq24735_charger_driver = {
+	.driver = {
+		.name = "bq24735-charger",
+		.of_match_table = bq24735_match_ids,
+	},
+	.probe = bq24735_charger_probe,
+	.id_table = bq24735_charger_id,
+};
+
+module_i2c_driver(bq24735_charger_driver);
+
+MODULE_DESCRIPTION("bq24735 battery charging driver");
+MODULE_AUTHOR("Darbha Sriharsha <dsriharsha@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
new file mode 100644
index 000000000..4f76ad9c2
--- /dev/null
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -0,0 +1,1169 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ2515X Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BQ2515X_MANUFACTURER "Texas Instruments"
+
+#define BQ2515X_STAT0		0x00
+#define BQ2515X_STAT1		0x01
+#define BQ2515X_STAT2		0x02
+#define BQ2515X_FLAG0		0x03
+#define BQ2515X_FLAG1		0x04
+#define BQ2515X_FLAG2		0x05
+#define BQ2515X_FLAG3		0x06
+#define BQ2515X_MASK0		0x07
+#define BQ2515X_MASK1		0x08
+#define BQ2515X_MASK2		0x09
+#define BQ2515X_MASK3		0x0a
+#define BQ2515X_VBAT_CTRL	0x12
+#define BQ2515X_ICHG_CTRL	0x13
+#define BQ2515X_PCHRGCTRL	0x14
+#define BQ2515X_TERMCTRL	0x15
+#define BQ2515X_BUVLO		0x16
+#define BQ2515X_CHARGERCTRL0	0x17
+#define BQ2515X_CHARGERCTRL1	0x18
+#define BQ2515X_ILIMCTRL	0x19
+#define BQ2515X_LDOCTRL		0x1d
+#define BQ2515X_MRCTRL		0x30
+#define BQ2515X_ICCTRL0		0x35
+#define BQ2515X_ICCTRL1		0x36
+#define BQ2515X_ICCTRL2		0x37
+#define BQ2515X_ADCCTRL0	0x40
+#define BQ2515X_ADCCTRL1	0x41
+#define BQ2515X_ADC_VBAT_M	0x42
+#define BQ2515X_ADC_VBAT_L	0x43
+#define BQ2515X_ADC_TS_M	0x44
+#define BQ2515X_ADC_TS_L	0x45
+#define BQ2515X_ADC_ICHG_M	0x46
+#define BQ2515X_ADC_ICHG_L	0x47
+#define BQ2515X_ADC_ADCIN_M	0x48
+#define BQ2515X_ADC_ADCIN_L	0x49
+#define BQ2515X_ADC_VIN_M	0x4a
+#define BQ2515X_ADC_VIN_L	0x4b
+#define BQ2515X_ADC_PMID_M	0x4c
+#define BQ2515X_ADC_PMID_L	0x4d
+#define BQ2515X_ADC_IIN_M	0x4e
+#define BQ2515X_ADC_IIN_L	0x4f
+#define BQ2515X_ADC_COMP1_M	0x52
+#define BQ2515X_ADC_COMP1_L	0X53
+#define BQ2515X_ADC_COMP2_M	0X54
+#define BQ2515X_ADC_COMP2_L	0x55
+#define BQ2515X_ADC_COMP3_M	0x56
+#define BQ2515X_ADC_COMP3_L	0x57
+#define BQ2515X_ADC_READ_EN	0x58
+#define BQ2515X_TS_FASTCHGCTRL	0x61
+#define BQ2515X_TS_COLD		0x62
+#define BQ2515X_TS_COOL		0x63
+#define BQ2515X_TS_WARM		0x64
+#define BQ2515X_TS_HOT		0x65
+#define BQ2515X_DEVICE_ID	0x6f
+
+#define BQ2515X_DEFAULT_ICHG_UA		10000
+#define BQ25150_DEFAULT_ILIM_UA		100000
+#define BQ25155_DEFAULT_ILIM_UA		500000
+#define BQ2515X_DEFAULT_VBAT_REG_UV	4200000
+#define BQ2515X_DEFAULT_IPRECHARGE_UA	2500
+
+#define BQ2515X_DIVISOR				65536
+#define BQ2515X_VBAT_BASE_VOLT			3600000
+#define BQ2515X_VBAT_REG_MAX			4600000
+#define BQ2515X_VBAT_REG_MIN			3600000
+#define BQ2515X_VBAT_STEP_UV			10000
+#define BQ2515X_UV_FACTOR			1000000
+#define BQ2515X_VBAT_MULTIPLIER			6
+#define BQ2515X_ICHG_DIVISOR			52429
+#define BQ2515X_ICHG_CURR_STEP_THRESH_UA	318750
+#define BQ2515X_ICHG_MIN_UA			0
+#define BQ2515X_ICHG_MAX_UA			500000
+#define BQ2515X_ICHG_RNG_1B0_UA			1250
+#define BQ2515X_ICHG_RNG_1B1_UA			2500
+#define BQ2515X_VLOWV_SEL_1B0_UV		3000000
+#define BQ2515X_VLOWV_SEL_1B1_UV		2800000
+#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA	18750
+#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA	37500
+#define BQ2515X_TWAKE2_MIN_US			1700000
+#define BQ2515X_TWAKE2_MAX_US			2300000
+
+#define BQ2515X_ILIM_150MA	0x2
+#define BQ2515X_ILIM_MASK	0x7
+#define BQ2515X_ILIM_MIN	50000
+#define BQ2515X_ILIM_MAX	600000
+#define BQ2515X_HEALTH_MASK	0xf
+#define BQ2515X_ICHGRNG_MASK	0x80
+#define BQ2515X_STAT0_MASK	0x0f
+#define BQ2515X_STAT1_MASK	0x1f
+#define BQ2515X_PRECHARGE_MASK	0x1f
+
+#define BQ2515X_TS_HOT_STAT		BIT(0)
+#define BQ2515X_TS_WARM_STAT		BIT(1)
+#define BQ2515X_TS_COOL_STAT		BIT(2)
+#define BQ2515X_TS_COLD_STAT		BIT(3)
+#define BQ2515X_SAFETY_TIMER_EXP	BIT(5)
+
+#define BQ2515X_EN_VBAT_READ		BIT(3)
+#define BQ2515X_EN_ICHG_READ		BIT(5)
+
+#define BQ2515X_VIN_GOOD		BIT(0)
+#define BQ2515X_CHRG_DONE		BIT(5)
+#define BQ2515X_CV_CHRG_MODE		BIT(6)
+
+#define BQ2515X_VIN_OVP_FAULT_STAT	BIT(7)
+
+#define BQ2515X_WATCHDOG_DISABLE	BIT(4)
+
+#define BQ2515X_ICHARGE_RANGE		BIT(7)
+
+#define BQ2515X_VLOWV_SEL		BIT(5)
+
+#define BQ2515X_CHARGER_DISABLE		BIT(0)
+
+#define BQ2515X_HWRESET_14S_WD		BIT(1)
+
+static const int bq2515x_ilim_lvl_values[] = {
+	50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
+};
+
+/**
+ * struct bq2515x_init_data -
+ * @ilim: input current limit
+ * @ichg: fast charge current
+ * @vbatreg: battery regulation voltage
+ * @iprechg: precharge current
+ */
+struct bq2515x_init_data {
+	int ilim;
+	int ichg;
+	int vbatreg;
+	int iprechg;
+};
+
+enum bq2515x_id {
+	BQ25150,
+	BQ25155,
+};
+
+/**
+ * struct bq2515x_device -
+ * @mains: mains properties
+ * @battery: battery properties
+ * @regmap: register map structure
+ * @dev: device structure
+ *
+ * @reset_gpio: manual reset (MR) pin
+ * @powerdown_gpio: low power mode pin
+ * @ac_detect_gpio: power good (PG) pin
+ * @ce_gpio: charge enable (CE) pin
+ *
+ * @model_name: string value describing device model
+ * @device_id: value of device_id
+ * @mains_online: boolean value indicating power supply online
+ *
+ * @init_data: charger initialization data structure
+ */
+struct bq2515x_device {
+	struct power_supply *mains;
+	struct power_supply *battery;
+	struct regmap *regmap;
+	struct device *dev;
+
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *powerdown_gpio;
+	struct gpio_desc *ac_detect_gpio;
+	struct gpio_desc *ce_gpio;
+
+	char model_name[I2C_NAME_SIZE];
+	int device_id;
+	bool mains_online;
+
+	struct bq2515x_init_data init_data;
+};
+
+static const struct reg_default bq25150_reg_defaults[] = {
+	{BQ2515X_FLAG0, 0x0},
+	{BQ2515X_FLAG1, 0x0},
+	{BQ2515X_FLAG2, 0x0},
+	{BQ2515X_FLAG3, 0x0},
+	{BQ2515X_MASK0, 0x0},
+	{BQ2515X_MASK1, 0x0},
+	{BQ2515X_MASK2, 0x71},
+	{BQ2515X_MASK3, 0x0},
+	{BQ2515X_VBAT_CTRL, 0x3C},
+	{BQ2515X_ICHG_CTRL, 0x8},
+	{BQ2515X_PCHRGCTRL, 0x2},
+	{BQ2515X_TERMCTRL, 0x14},
+	{BQ2515X_BUVLO, 0x0},
+	{BQ2515X_CHARGERCTRL0, 0x82},
+	{BQ2515X_CHARGERCTRL1, 0x42},
+	{BQ2515X_ILIMCTRL, 0x1},
+	{BQ2515X_LDOCTRL, 0xB0},
+	{BQ2515X_MRCTRL, 0x2A},
+	{BQ2515X_ICCTRL0, 0x10},
+	{BQ2515X_ICCTRL1, 0x0},
+	{BQ2515X_ICCTRL2, 0x0},
+	{BQ2515X_ADCCTRL0, 0x2},
+	{BQ2515X_ADCCTRL1, 0x40},
+	{BQ2515X_ADC_COMP1_M, 0x23},
+	{BQ2515X_ADC_COMP1_L, 0x20},
+	{BQ2515X_ADC_COMP2_M, 0x38},
+	{BQ2515X_ADC_COMP2_L, 0x90},
+	{BQ2515X_ADC_COMP3_M, 0x0},
+	{BQ2515X_ADC_COMP3_L, 0x0},
+	{BQ2515X_ADC_READ_EN, 0x0},
+	{BQ2515X_TS_FASTCHGCTRL, 0x34},
+	{BQ2515X_TS_COLD, 0x7C},
+	{BQ2515X_TS_COOL, 0x6D},
+	{BQ2515X_TS_WARM, 0x38},
+	{BQ2515X_TS_HOT, 0x27},
+	{BQ2515X_DEVICE_ID, 0x20},
+};
+
+static const struct reg_default bq25155_reg_defaults[] = {
+	{BQ2515X_FLAG0, 0x0},
+	{BQ2515X_FLAG1, 0x0},
+	{BQ2515X_FLAG2, 0x0},
+	{BQ2515X_FLAG3, 0x0},
+	{BQ2515X_MASK0, 0x0},
+	{BQ2515X_MASK1, 0x0},
+	{BQ2515X_MASK2, 0x71},
+	{BQ2515X_MASK3, 0x0},
+	{BQ2515X_VBAT_CTRL, 0x3C},
+	{BQ2515X_ICHG_CTRL, 0x8},
+	{BQ2515X_PCHRGCTRL, 0x2},
+	{BQ2515X_TERMCTRL, 0x14},
+	{BQ2515X_BUVLO, 0x0},
+	{BQ2515X_CHARGERCTRL0, 0x82},
+	{BQ2515X_CHARGERCTRL1, 0xC2},
+	{BQ2515X_ILIMCTRL, 0x6},
+	{BQ2515X_LDOCTRL, 0xB0},
+	{BQ2515X_MRCTRL, 0x2A},
+	{BQ2515X_ICCTRL0, 0x10},
+	{BQ2515X_ICCTRL1, 0x0},
+	{BQ2515X_ICCTRL2, 0x40},
+	{BQ2515X_ADCCTRL0, 0x2},
+	{BQ2515X_ADCCTRL1, 0x40},
+	{BQ2515X_ADC_COMP1_M, 0x23},
+	{BQ2515X_ADC_COMP1_L, 0x20},
+	{BQ2515X_ADC_COMP2_M, 0x38},
+	{BQ2515X_ADC_COMP2_L, 0x90},
+	{BQ2515X_ADC_COMP3_M, 0x0},
+	{BQ2515X_ADC_COMP3_L, 0x0},
+	{BQ2515X_ADC_READ_EN, 0x0},
+	{BQ2515X_TS_FASTCHGCTRL, 0x34},
+	{BQ2515X_TS_COLD, 0x7C},
+	{BQ2515X_TS_COOL, 0x6D},
+	{BQ2515X_TS_WARM, 0x38},
+	{BQ2515X_TS_HOT, 0x27},
+	{BQ2515X_DEVICE_ID, 0x35},
+};
+
+static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int val;
+
+	/* Read the STAT register if we can read it then the device is out
+	 * of ship mode.  If the register cannot be read then attempt to wake
+	 * it up and enable the ADC.
+	 */
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+	if (ret)
+		return ret;
+
+	/* Need to toggle LP and bring device out of ship mode. The device
+	 * will exit the ship mode when the MR pin is held low for at least
+	 * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
+	 */
+	gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
+
+	gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
+	usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
+	gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
+
+	return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
+				(BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
+}
+
+static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
+{
+	bool dc = false;
+	unsigned int val;
+	int ret;
+
+	if (bq2515x->ac_detect_gpio)
+		val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
+	else {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+		if (ret)
+			return ret;
+	}
+
+	dc = val & BQ2515X_VIN_GOOD;
+
+	ret = bq2515x->mains_online != dc;
+
+	bq2515x->mains_online = dc;
+
+	return ret;
+}
+
+static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
+{
+	int ret;
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
+			BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+						BQ2515X_HWRESET_14S_WD, 0);
+}
+
+static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int vbat_msb;
+	int vbat_lsb;
+	uint32_t vbat_measurement;
+
+	if (!bq2515x->mains_online)
+		bq2515x_wake_up(bq2515x);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
+	if (ret)
+		return ret;
+
+	vbat_measurement = (vbat_msb << 8) | vbat_lsb;
+
+	return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
+						BQ2515X_VBAT_MULTIPLIER;
+}
+
+static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ichg_msb;
+	int ichg_lsb;
+	uint32_t ichg_measurement;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int ichg_reg_code, reg_code;
+	unsigned int icharge_range = 0, pchrgctrl;
+	unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
+
+	if (!bq2515x->mains_online)
+		return -ENODATA;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
+	if (ret)
+		return ret;
+
+	ichg_measurement = (ichg_msb << 8) | ichg_lsb;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
+	if (ret)
+		return ret;
+
+	vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
+
+	if (vlowv_sel)
+		vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
+
+	if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+								&pchrgctrl);
+		if (ret)
+			return ret;
+
+		reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+	} else {
+		ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
+							&ichg_reg_code);
+		if (ret)
+			return ret;
+
+		reg_code = ichg_reg_code;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	return reg_code * (ichg_multiplier * ichg_measurement /
+							BQ2515X_ICHG_DIVISOR);
+}
+
+static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ce_pin;
+	int icctrl2;
+	int charger_disable;
+
+	ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
+	if (ret)
+		return ret;
+
+	charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
+
+	if (charger_disable || ce_pin)
+		return true;
+
+	return false;
+}
+
+static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
+{
+	gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
+
+	return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+					BQ2515X_CHARGER_DISABLE, val);
+}
+
+static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int ichg_reg_code;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	return ichg_reg_code * ichg_multiplier;
+}
+
+static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
+								int val)
+{
+	int ret;
+	unsigned int ichg_reg_code;
+	u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int icharge_range = 0;
+
+	if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
+		return -EINVAL;
+
+	if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
+		ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+		icharge_range = BQ2515X_ICHARGE_RANGE;
+	}
+
+	bq2515x_set_charge_disable(bq2515x, 1);
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+					BQ2515X_ICHARGE_RANGE, icharge_range);
+	if (ret)
+		return ret;
+
+	ichg_reg_code = val / ichg_multiplier;
+
+	ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+	u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int precharge_reg_code;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range)
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+	precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+
+	return precharge_reg_code * precharge_multiplier;
+}
+
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+					int val)
+{
+	int ret;
+	unsigned int pchrgctrl;
+	unsigned int icharge_range;
+	unsigned int precharge_reg_code;
+	unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+	if (ret)
+		return ret;
+
+	icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+	if (icharge_range) {
+		precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+	} else {
+		precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+		precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+	}
+	if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+		return -EINVAL;
+
+	precharge_reg_code = val / precharge_multiplier;
+
+	ret = bq2515x_set_charge_disable(bq2515x, 1);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+				BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
+				   union power_supply_propval *val)
+{
+	bool status0_no_fault;
+	bool status1_no_fault;
+	bool ce_status;
+	bool charge_done;
+	unsigned int status;
+	int ret;
+
+	if (!bq2515x->mains_online) {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
+	if (ret)
+		return ret;
+
+	/*
+	 * The code block below is used to determine if any faults from the
+	 * STAT0 register are disbaling charging or if the charge has completed
+	 * according to the CHARGE_DONE_STAT bit.
+	 */
+	if (((status & BQ2515X_STAT0_MASK) == true) &
+			((status & BQ2515X_CHRG_DONE) == false)) {
+		status0_no_fault = true;
+		charge_done = false;
+	} else if (status & BQ2515X_CHRG_DONE) {
+		charge_done = true;
+		status0_no_fault = false;
+	} else {
+		status0_no_fault = false;
+		charge_done = false;
+	}
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
+	if (ret)
+		return ret;
+	/*
+	 * The code block below is used to determine if any faults from the
+	 * STAT1 register are disbaling charging
+	 */
+	if ((status & BQ2515X_STAT1_MASK) == false)
+		status1_no_fault = true;
+	else
+		status1_no_fault = false;
+
+	ce_status = (!bq2515x_get_charge_disable(bq2515x));
+
+	/*
+	 * If there are no faults and charging is enabled, then status is
+	 * charging. Otherwise, if charging is complete, then status is full.
+	 * Otherwise, if a fault exists or charging is disabled, then status is
+	 * not charging
+	 */
+	if (status0_no_fault & status1_no_fault & ce_status)
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	else if (charge_done)
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+	else if (!(status0_no_fault & status1_no_fault & ce_status))
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+	return 0;
+}
+
+static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
+{
+	int vbat_reg_code;
+	int ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
+	if (ret)
+		return ret;
+
+	return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
+}
+
+static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
+{
+	int vbat_reg_code;
+
+	if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
+		return -EINVAL;
+
+	vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
+
+	return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
+}
+
+static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	int ilimctrl;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
+	if (ret)
+		return ret;
+
+	return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
+}
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+	int i = 0;
+	unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+	for (i = array_size - 1; i > 0; i--) {
+		if (val >= bq2515x_ilim_lvl_values[i])
+			break;
+	}
+	return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
+static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
+					enum power_supply_property prop)
+{
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
+				      union power_supply_propval *val)
+{
+	int health = POWER_SUPPLY_HEALTH_GOOD;
+	int ret;
+	unsigned int stat1;
+	unsigned int flag3;
+
+	if (!bq2515x->mains_online)
+		bq2515x_wake_up(bq2515x);
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
+	if (ret)
+		return ret;
+
+	if (stat1 & BQ2515X_HEALTH_MASK) {
+		switch (stat1 & BQ2515X_HEALTH_MASK) {
+		case BQ2515X_TS_HOT_STAT:
+			health = POWER_SUPPLY_HEALTH_HOT;
+			break;
+		case BQ2515X_TS_WARM_STAT:
+			health = POWER_SUPPLY_HEALTH_WARM;
+			break;
+		case BQ2515X_TS_COOL_STAT:
+			health = POWER_SUPPLY_HEALTH_COOL;
+			break;
+		case BQ2515X_TS_COLD_STAT:
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+			break;
+		}
+	}
+
+	if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+	if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
+		health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+
+	val->intval = health;
+	return 0;
+}
+
+static int bq2515x_mains_set_property(struct power_supply *psy,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2515x_set_batt_reg(bq2515x, val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq2515x_set_precharge_current(bq2515x, val->intval);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq2515x_mains_get_property(struct power_supply *psy,
+				     enum power_supply_property prop,
+				     union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (prop) {
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq2515x_get_const_charge_current(bq2515x);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq2515x_get_batt_reg(bq2515x);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq2515x_get_precharge_current(bq2515x);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = bq2515x->mains_online;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq2515x_charger_get_health(bq2515x, val);
+		if (ret)
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq2515x_get_ilim_lvl(bq2515x);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq2515x->model_name;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ2515X_MANUFACTURER;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq2515x_charging_status(bq2515x, val);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq2515x_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+	int ret;
+
+	ret = bq2515x_update_ps_status(bq2515x);
+	if (ret)
+		return ret;
+
+	switch (prop) {
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = bq2515x->init_data.vbatreg;
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		ret = bq2515x->init_data.ichg;
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq2515x_get_battery_voltage_now(bq2515x);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq2515x_get_battery_current_now(bq2515x);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const enum power_supply_property bq2515x_battery_properties[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static const enum power_supply_property bq2515x_mains_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+};
+
+static const struct power_supply_desc bq2515x_mains_desc = {
+	.name			= "bq2515x-mains",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.get_property		= bq2515x_mains_get_property,
+	.set_property		= bq2515x_mains_set_property,
+	.properties		= bq2515x_mains_properties,
+	.num_properties		= ARRAY_SIZE(bq2515x_mains_properties),
+	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
+};
+
+static const struct power_supply_desc bq2515x_battery_desc = {
+	.name			= "bq2515x-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= bq2515x_battery_get_property,
+	.properties		= bq2515x_battery_properties,
+	.num_properties		= ARRAY_SIZE(bq2515x_battery_properties),
+	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
+};
+
+static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
+		struct device *dev, struct power_supply_config psy_cfg)
+{
+	bq2515x->mains = devm_power_supply_register(bq2515x->dev,
+						    &bq2515x_mains_desc,
+						    &psy_cfg);
+	if (IS_ERR(bq2515x->mains))
+		return -EINVAL;
+
+	bq2515x->battery = devm_power_supply_register(bq2515x->dev,
+						      &bq2515x_battery_desc,
+						      &psy_cfg);
+	if (IS_ERR(bq2515x->battery))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
+{
+	int ret;
+	struct power_supply_battery_info *bat_info;
+
+	ret = bq2515x_disable_watchdog_timers(bq2515x);
+	if (ret)
+		return ret;
+
+	if (bq2515x->init_data.ilim) {
+		ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
+		if (ret)
+			return ret;
+	}
+
+	ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
+	if (ret) {
+		dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
+
+		bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA;
+
+		bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV;
+
+		bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA;
+
+	} else {
+		bq2515x->init_data.ichg =
+				bat_info->constant_charge_current_max_ua;
+
+		bq2515x->init_data.vbatreg =
+				bat_info->constant_charge_voltage_max_uv;
+
+		bq2515x->init_data.iprechg =
+				bat_info->precharge_current_ua;
+	}
+
+	ret = bq2515x_set_const_charge_current(bq2515x,
+						bq2515x->init_data.ichg);
+	if (ret)
+		return ret;
+
+	ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg);
+	if (ret)
+		return ret;
+
+	return bq2515x_set_precharge_current(bq2515x,
+						bq2515x->init_data.iprechg);
+}
+
+static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
+{
+	int ret;
+
+	ret = device_property_read_u32(bq2515x->dev,
+				      "input-current-limit-microamp",
+				      &bq2515x->init_data.ilim);
+	if (ret) {
+		switch (bq2515x->device_id) {
+		case BQ25150:
+			bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
+			break;
+		case BQ25155:
+			bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
+			break;
+		}
+	}
+
+	bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "ac-detect", GPIOD_IN);
+	if (IS_ERR(bq2515x->ac_detect_gpio)) {
+		ret = PTR_ERR(bq2515x->ac_detect_gpio);
+		dev_err(bq2515x->dev, "Failed to get ac detect");
+		return ret;
+	}
+
+	bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->reset_gpio)) {
+		ret = PTR_ERR(bq2515x->reset_gpio);
+		dev_err(bq2515x->dev, "Failed to get reset");
+		return ret;
+	}
+
+	bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						"powerdown", GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->powerdown_gpio)) {
+		ret = PTR_ERR(bq2515x->powerdown_gpio);
+		dev_err(bq2515x->dev, "Failed to get powerdown");
+		return ret;
+	}
+
+	bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
+						   "charge-enable",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(bq2515x->ce_gpio)) {
+		ret = PTR_ERR(bq2515x->ce_gpio);
+		dev_err(bq2515x->dev, "Failed to get ce");
+		return ret;
+	}
+
+	return 0;
+}
+
+static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BQ2515X_STAT0 ... BQ2515X_FLAG3:
+	case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bq25150_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register		= BQ2515X_DEVICE_ID,
+	.reg_defaults		= bq25150_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(bq25150_reg_defaults),
+	.cache_type		= REGCACHE_RBTREE,
+	.volatile_reg		= bq2515x_volatile_register,
+};
+
+static const struct regmap_config bq25155_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register		= BQ2515X_DEVICE_ID,
+	.reg_defaults		= bq25155_reg_defaults,
+	.num_reg_defaults	= ARRAY_SIZE(bq25155_reg_defaults),
+	.cache_type		= REGCACHE_RBTREE,
+	.volatile_reg		= bq2515x_volatile_register,
+};
+
+static int bq2515x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct bq2515x_device *bq2515x;
+	struct power_supply_config charger_cfg = {};
+	int ret;
+
+	bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
+	if (!bq2515x)
+		return -ENOMEM;
+
+	bq2515x->dev = dev;
+
+	strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
+
+	bq2515x->device_id = id->driver_data;
+
+	switch (bq2515x->device_id) {
+	case BQ25150:
+		bq2515x->regmap = devm_regmap_init_i2c(client,
+						&bq25150_regmap_config);
+		break;
+	case BQ25155:
+		bq2515x->regmap = devm_regmap_init_i2c(client,
+						&bq25155_regmap_config);
+		break;
+	}
+
+	if (IS_ERR(bq2515x->regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(bq2515x->regmap);
+	}
+
+	i2c_set_clientdata(client, bq2515x);
+
+	charger_cfg.drv_data = bq2515x;
+	charger_cfg.of_node = dev->of_node;
+
+	ret = bq2515x_read_properties(bq2515x);
+	if (ret) {
+		dev_err(dev, "Failed to read device tree properties %d\n",
+									ret);
+		return ret;
+	}
+
+	ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
+	if (ret) {
+		dev_err(dev, "failed to register power supply\n");
+		return ret;
+	}
+
+	ret = bq2515x_hw_init(bq2515x);
+	if (ret) {
+		dev_err(dev, "Cannot initialize the chip\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bq2515x_i2c_ids[] = {
+	{ "bq25150", BQ25150, },
+	{ "bq25155", BQ25155, },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
+
+static const struct of_device_id bq2515x_of_match[] = {
+	{ .compatible = "ti,bq25150", },
+	{ .compatible = "ti,bq25155", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq2515x_of_match);
+
+static struct i2c_driver bq2515x_driver = {
+	.driver = {
+		.name = "bq2515x-charger",
+		.of_match_table = bq2515x_of_match,
+	},
+	.probe = bq2515x_probe,
+	.id_table = bq2515x_i2c_ids,
+};
+module_i2c_driver(bq2515x_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
+MODULE_DESCRIPTION("BQ2515X charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq256xx_charger.c b/drivers/power/supply/bq256xx_charger.c
new file mode 100644
index 000000000..686eb8d86
--- /dev/null
+++ b/drivers/power/supply/bq256xx_charger.c
@@ -0,0 +1,1757 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ256XX Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/usb/phy.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+#define BQ256XX_MANUFACTURER "Texas Instruments"
+
+#define BQ256XX_INPUT_CURRENT_LIMIT		0x00
+#define BQ256XX_CHARGER_CONTROL_0		0x01
+#define BQ256XX_CHARGE_CURRENT_LIMIT		0x02
+#define BQ256XX_PRECHG_AND_TERM_CURR_LIM	0x03
+#define BQ256XX_BATTERY_VOLTAGE_LIMIT		0x04
+#define BQ256XX_CHARGER_CONTROL_1		0x05
+#define BQ256XX_CHARGER_CONTROL_2		0x06
+#define BQ256XX_CHARGER_CONTROL_3		0x07
+#define BQ256XX_CHARGER_STATUS_0		0x08
+#define BQ256XX_CHARGER_STATUS_1		0x09
+#define BQ256XX_CHARGER_STATUS_2		0x0a
+#define BQ256XX_PART_INFORMATION		0x0b
+#define BQ256XX_CHARGER_CONTROL_4		0x0c
+
+#define BQ256XX_IINDPM_MASK		GENMASK(4, 0)
+#define BQ256XX_IINDPM_STEP_uA		100000
+#define BQ256XX_IINDPM_OFFSET_uA	100000
+#define BQ256XX_IINDPM_MIN_uA		100000
+#define BQ256XX_IINDPM_MAX_uA		3200000
+#define BQ256XX_IINDPM_DEF_uA		2400000
+
+#define BQ256XX_VINDPM_MASK		GENMASK(3, 0)
+#define BQ256XX_VINDPM_STEP_uV		100000
+#define BQ256XX_VINDPM_OFFSET_uV	3900000
+#define BQ256XX_VINDPM_MIN_uV		3900000
+#define BQ256XX_VINDPM_MAX_uV		5400000
+#define BQ256XX_VINDPM_DEF_uV		4500000
+
+#define BQ256XX_VBATREG_MASK		GENMASK(7, 3)
+#define BQ2560X_VBATREG_STEP_uV		32000
+#define BQ2560X_VBATREG_OFFSET_uV	3856000
+#define BQ2560X_VBATREG_MIN_uV		3856000
+#define BQ2560X_VBATREG_MAX_uV		4624000
+#define BQ2560X_VBATREG_DEF_uV		4208000
+#define BQ25601D_VBATREG_OFFSET_uV	3847000
+#define BQ25601D_VBATREG_MIN_uV		3847000
+#define BQ25601D_VBATREG_MAX_uV		4615000
+#define BQ25601D_VBATREG_DEF_uV		4199000
+#define BQ2561X_VBATREG_STEP_uV		10000
+#define BQ25611D_VBATREG_MIN_uV		3494000
+#define BQ25611D_VBATREG_MAX_uV		4510000
+#define BQ25611D_VBATREG_DEF_uV		4190000
+#define BQ25618_VBATREG_MIN_uV		3504000
+#define BQ25618_VBATREG_MAX_uV		4500000
+#define BQ25618_VBATREG_DEF_uV		4200000
+#define BQ256XX_VBATREG_BIT_SHIFT	3
+#define BQ2561X_VBATREG_THRESH		0x8
+#define BQ25611D_VBATREG_THRESH_uV	4290000
+#define BQ25618_VBATREG_THRESH_uV	4300000
+
+#define BQ256XX_ITERM_MASK		GENMASK(3, 0)
+#define BQ256XX_ITERM_STEP_uA		60000
+#define BQ256XX_ITERM_OFFSET_uA		60000
+#define BQ256XX_ITERM_MIN_uA		60000
+#define BQ256XX_ITERM_MAX_uA		780000
+#define BQ256XX_ITERM_DEF_uA		180000
+#define BQ25618_ITERM_STEP_uA		20000
+#define BQ25618_ITERM_OFFSET_uA		20000
+#define BQ25618_ITERM_MIN_uA		20000
+#define BQ25618_ITERM_MAX_uA		260000
+#define BQ25618_ITERM_DEF_uA		60000
+
+#define BQ256XX_IPRECHG_MASK		GENMASK(7, 4)
+#define BQ256XX_IPRECHG_STEP_uA		60000
+#define BQ256XX_IPRECHG_OFFSET_uA	60000
+#define BQ256XX_IPRECHG_MIN_uA		60000
+#define BQ256XX_IPRECHG_MAX_uA		780000
+#define BQ256XX_IPRECHG_DEF_uA		180000
+#define BQ25618_IPRECHG_STEP_uA		20000
+#define BQ25618_IPRECHG_OFFSET_uA	20000
+#define BQ25618_IPRECHG_MIN_uA		20000
+#define BQ25618_IPRECHG_MAX_uA		260000
+#define BQ25618_IPRECHG_DEF_uA		40000
+#define BQ256XX_IPRECHG_BIT_SHIFT	4
+
+#define BQ256XX_ICHG_MASK		GENMASK(5, 0)
+#define BQ256XX_ICHG_STEP_uA		60000
+#define BQ256XX_ICHG_MIN_uA		0
+#define BQ256XX_ICHG_MAX_uA		3000000
+#define BQ2560X_ICHG_DEF_uA		2040000
+#define BQ25611D_ICHG_DEF_uA		1020000
+#define BQ25618_ICHG_STEP_uA		20000
+#define BQ25618_ICHG_MIN_uA		0
+#define BQ25618_ICHG_MAX_uA		1500000
+#define BQ25618_ICHG_DEF_uA		340000
+#define BQ25618_ICHG_THRESH		0x3c
+#define BQ25618_ICHG_THRESH_uA		1180000
+
+#define BQ256XX_VBUS_STAT_MASK		GENMASK(7, 5)
+#define BQ256XX_VBUS_STAT_NO_INPUT	0
+#define BQ256XX_VBUS_STAT_USB_SDP	BIT(5)
+#define BQ256XX_VBUS_STAT_USB_CDP	BIT(6)
+#define BQ256XX_VBUS_STAT_USB_DCP	(BIT(6) | BIT(5))
+#define BQ256XX_VBUS_STAT_USB_OTG	(BIT(7) | BIT(6) | BIT(5))
+
+#define BQ256XX_CHRG_STAT_MASK		GENMASK(4, 3)
+#define BQ256XX_CHRG_STAT_NOT_CHRGING	0
+#define BQ256XX_CHRG_STAT_PRECHRGING	BIT(3)
+#define BQ256XX_CHRG_STAT_FAST_CHRGING	BIT(4)
+#define BQ256XX_CHRG_STAT_CHRG_TERM	(BIT(4) | BIT(3))
+
+#define BQ256XX_PG_STAT_MASK		BIT(2)
+#define BQ256XX_WDT_FAULT_MASK		BIT(7)
+#define BQ256XX_CHRG_FAULT_MASK		GENMASK(5, 4)
+#define BQ256XX_CHRG_FAULT_NORMAL	0
+#define BQ256XX_CHRG_FAULT_INPUT	BIT(4)
+#define BQ256XX_CHRG_FAULT_THERM	BIT(5)
+#define BQ256XX_CHRG_FAULT_CST_EXPIRE	(BIT(5) | BIT(4))
+#define BQ256XX_BAT_FAULT_MASK		BIT(3)
+#define BQ256XX_NTC_FAULT_MASK		GENMASK(2, 0)
+#define BQ256XX_NTC_FAULT_WARM		BIT(1)
+#define BQ256XX_NTC_FAULT_COOL		(BIT(1) | BIT(0))
+#define BQ256XX_NTC_FAULT_COLD		(BIT(2) | BIT(0))
+#define BQ256XX_NTC_FAULT_HOT		(BIT(2) | BIT(1))
+
+#define BQ256XX_NUM_WD_VAL	4
+#define BQ256XX_WATCHDOG_MASK	GENMASK(5, 4)
+#define BQ256XX_WATCHDOG_MAX	1600000
+#define BQ256XX_WATCHDOG_DIS	0
+#define BQ256XX_WDT_BIT_SHIFT	4
+
+#define BQ256XX_REG_RST		BIT(7)
+
+/**
+ * struct bq256xx_init_data -
+ * @ichg: fast charge current
+ * @iindpm: input current limit
+ * @vbatreg: charge voltage
+ * @iterm: termination current
+ * @iprechg: precharge current
+ * @vindpm: input voltage limit
+ * @ichg_max: maximum fast charge current
+ * @vbatreg_max: maximum charge voltage
+ */
+struct bq256xx_init_data {
+	u32 ichg;
+	u32 iindpm;
+	u32 vbatreg;
+	u32 iterm;
+	u32 iprechg;
+	u32 vindpm;
+	u32 ichg_max;
+	u32 vbatreg_max;
+};
+
+/**
+ * struct bq256xx_state -
+ * @vbus_stat: VBUS status according to BQ256XX_CHARGER_STATUS_0
+ * @chrg_stat: charging status according to BQ256XX_CHARGER_STATUS_0
+ * @online: PG status according to BQ256XX_CHARGER_STATUS_0
+ *
+ * @wdt_fault: watchdog fault according to BQ256XX_CHARGER_STATUS_1
+ * @bat_fault: battery fault according to BQ256XX_CHARGER_STATUS_1
+ * @chrg_fault: charging fault according to BQ256XX_CHARGER_STATUS_1
+ * @ntc_fault: TS fault according to BQ256XX_CHARGER_STATUS_1
+ */
+struct bq256xx_state {
+	u8 vbus_stat;
+	u8 chrg_stat;
+	bool online;
+
+	u8 wdt_fault;
+	u8 bat_fault;
+	u8 chrg_fault;
+	u8 ntc_fault;
+};
+
+enum bq256xx_id {
+	BQ25600,
+	BQ25600D,
+	BQ25601,
+	BQ25601D,
+	BQ25618,
+	BQ25619,
+	BQ25611D,
+};
+
+/**
+ * struct bq256xx_device -
+ * @client: i2c client structure
+ * @regmap: register map structure
+ * @dev: device structure
+ * @charger: power supply registered for the charger
+ * @battery: power supply registered for the battery
+ * @lock: mutex lock structure
+ *
+ * @usb2_phy: usb_phy identifier
+ * @usb3_phy: usb_phy identifier
+ * @usb_nb: notifier block
+ * @usb_work: usb work queue
+ * @usb_event: usb_event code
+ *
+ * @model_name: i2c name string
+ *
+ * @init_data: initialization data
+ * @chip_info: device variant information
+ * @state: device status and faults
+ * @watchdog_timer: watchdog timer value in milliseconds
+ */
+struct bq256xx_device {
+	struct i2c_client *client;
+	struct device *dev;
+	struct power_supply *charger;
+	struct power_supply *battery;
+	struct mutex lock;
+	struct regmap *regmap;
+
+	struct usb_phy *usb2_phy;
+	struct usb_phy *usb3_phy;
+	struct notifier_block usb_nb;
+	struct work_struct usb_work;
+	unsigned long usb_event;
+
+	char model_name[I2C_NAME_SIZE];
+
+	struct bq256xx_init_data init_data;
+	const struct bq256xx_chip_info *chip_info;
+	struct bq256xx_state state;
+	int watchdog_timer;
+};
+
+/**
+ * struct bq256xx_chip_info -
+ * @model_id: device instance
+ *
+ * @bq256xx_regmap_config: regmap configuration struct
+ * @bq256xx_get_ichg: pointer to instance specific get_ichg function
+ * @bq256xx_get_iindpm: pointer to instance specific get_iindpm function
+ * @bq256xx_get_vbatreg: pointer to instance specific get_vbatreg function
+ * @bq256xx_get_iterm: pointer to instance specific get_iterm function
+ * @bq256xx_get_iprechg: pointer to instance specific get_iprechg function
+ * @bq256xx_get_vindpm: pointer to instance specific get_vindpm function
+ *
+ * @bq256xx_set_ichg: pointer to instance specific set_ichg function
+ * @bq256xx_set_iindpm: pointer to instance specific set_iindpm function
+ * @bq256xx_set_vbatreg: pointer to instance specific set_vbatreg function
+ * @bq256xx_set_iterm: pointer to instance specific set_iterm function
+ * @bq256xx_set_iprechg: pointer to instance specific set_iprechg function
+ * @bq256xx_set_vindpm: pointer to instance specific set_vindpm function
+ *
+ * @bq256xx_def_ichg: default ichg value in microamps
+ * @bq256xx_def_iindpm: default iindpm value in microamps
+ * @bq256xx_def_vbatreg: default vbatreg value in microvolts
+ * @bq256xx_def_iterm: default iterm value in microamps
+ * @bq256xx_def_iprechg: default iprechg value in microamps
+ * @bq256xx_def_vindpm: default vindpm value in microvolts
+ *
+ * @bq256xx_max_ichg: maximum charge current in microamps
+ * @bq256xx_max_vbatreg: maximum battery regulation voltage in microvolts
+ *
+ * @has_usb_detect: indicates whether device has BC1.2 detection
+ */
+struct bq256xx_chip_info {
+	int model_id;
+
+	const struct regmap_config *bq256xx_regmap_config;
+
+	int (*bq256xx_get_ichg)(struct bq256xx_device *bq);
+	int (*bq256xx_get_iindpm)(struct bq256xx_device *bq);
+	int (*bq256xx_get_vbatreg)(struct bq256xx_device *bq);
+	int (*bq256xx_get_iterm)(struct bq256xx_device *bq);
+	int (*bq256xx_get_iprechg)(struct bq256xx_device *bq);
+	int (*bq256xx_get_vindpm)(struct bq256xx_device *bq);
+
+	int (*bq256xx_set_ichg)(struct bq256xx_device *bq, int ichg);
+	int (*bq256xx_set_iindpm)(struct bq256xx_device *bq, int iindpm);
+	int (*bq256xx_set_vbatreg)(struct bq256xx_device *bq, int vbatreg);
+	int (*bq256xx_set_iterm)(struct bq256xx_device *bq, int iterm);
+	int (*bq256xx_set_iprechg)(struct bq256xx_device *bq, int iprechg);
+	int (*bq256xx_set_vindpm)(struct bq256xx_device *bq, int vindpm);
+
+	int bq256xx_def_ichg;
+	int bq256xx_def_iindpm;
+	int bq256xx_def_vbatreg;
+	int bq256xx_def_iterm;
+	int bq256xx_def_iprechg;
+	int bq256xx_def_vindpm;
+
+	int bq256xx_max_ichg;
+	int bq256xx_max_vbatreg;
+
+	bool has_usb_detect;
+};
+
+static int bq256xx_watchdog_time[BQ256XX_NUM_WD_VAL] = {
+	0, 40000, 80000, 1600000
+};
+
+static const int bq25611d_vbatreg_values[] = {
+	3494000, 3590000, 3686000, 3790000, 3894000, 3990000, 4090000, 4140000,
+	4190000
+};
+
+static const int bq25618_619_vbatreg_values[] = {
+	3504000, 3600000, 3696000, 3800000, 3904000, 4000000, 4100000, 4150000,
+	4200000
+};
+
+static const int bq25618_619_ichg_values[] = {
+	1290000, 1360000, 1430000, 1500000
+};
+
+static enum power_supply_usb_type bq256xx_usb_type[] = {
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+	POWER_SUPPLY_USB_TYPE_ACA,
+};
+
+static int bq256xx_array_parse(int array_size, int val, const int array[])
+{
+	int i = 0;
+
+	if (val < array[i])
+		return i - 1;
+
+	if (val >= array[array_size - 1])
+		return array_size - 1;
+
+	for (i = 1; i < array_size; i++) {
+		if (val == array[i])
+			return i;
+
+		if (val > array[i - 1] && val < array[i]) {
+			if (val < array[i])
+				return i - 1;
+			else
+				return i;
+		}
+	}
+	return -EINVAL;
+}
+
+static int bq256xx_usb_notifier(struct notifier_block *nb, unsigned long val,
+				void *priv)
+{
+	struct bq256xx_device *bq =
+			container_of(nb, struct bq256xx_device, usb_nb);
+
+	bq->usb_event = val;
+	queue_work(system_power_efficient_wq, &bq->usb_work);
+
+	return NOTIFY_OK;
+}
+
+static void bq256xx_usb_work(struct work_struct *data)
+{
+	struct bq256xx_device *bq =
+			container_of(data, struct bq256xx_device, usb_work);
+
+	switch (bq->usb_event) {
+	case USB_EVENT_ID:
+		break;
+	case USB_EVENT_NONE:
+		power_supply_changed(bq->charger);
+		break;
+	default:
+		dev_err(bq->dev, "Error switching to charger mode.\n");
+		break;
+	}
+}
+
+static struct reg_default bq2560x_reg_defs[] = {
+	{BQ256XX_INPUT_CURRENT_LIMIT, 0x17},
+	{BQ256XX_CHARGER_CONTROL_0, 0x1a},
+	{BQ256XX_CHARGE_CURRENT_LIMIT, 0xa2},
+	{BQ256XX_PRECHG_AND_TERM_CURR_LIM, 0x22},
+	{BQ256XX_BATTERY_VOLTAGE_LIMIT, 0x58},
+	{BQ256XX_CHARGER_CONTROL_1, 0x9f},
+	{BQ256XX_CHARGER_CONTROL_2, 0x66},
+	{BQ256XX_CHARGER_CONTROL_3, 0x4c},
+};
+
+static struct reg_default bq25611d_reg_defs[] = {
+	{BQ256XX_INPUT_CURRENT_LIMIT, 0x17},
+	{BQ256XX_CHARGER_CONTROL_0, 0x1a},
+	{BQ256XX_CHARGE_CURRENT_LIMIT, 0x91},
+	{BQ256XX_PRECHG_AND_TERM_CURR_LIM, 0x12},
+	{BQ256XX_BATTERY_VOLTAGE_LIMIT, 0x40},
+	{BQ256XX_CHARGER_CONTROL_1, 0x9e},
+	{BQ256XX_CHARGER_CONTROL_2, 0xe6},
+	{BQ256XX_CHARGER_CONTROL_3, 0x4c},
+	{BQ256XX_PART_INFORMATION, 0x54},
+	{BQ256XX_CHARGER_CONTROL_4, 0x75},
+};
+
+static struct reg_default bq25618_619_reg_defs[] = {
+	{BQ256XX_INPUT_CURRENT_LIMIT, 0x17},
+	{BQ256XX_CHARGER_CONTROL_0, 0x1a},
+	{BQ256XX_CHARGE_CURRENT_LIMIT, 0x91},
+	{BQ256XX_PRECHG_AND_TERM_CURR_LIM, 0x12},
+	{BQ256XX_BATTERY_VOLTAGE_LIMIT, 0x40},
+	{BQ256XX_CHARGER_CONTROL_1, 0x9e},
+	{BQ256XX_CHARGER_CONTROL_2, 0xe6},
+	{BQ256XX_CHARGER_CONTROL_3, 0x4c},
+	{BQ256XX_PART_INFORMATION, 0x2c},
+	{BQ256XX_CHARGER_CONTROL_4, 0x75},
+};
+
+static int bq256xx_get_state(struct bq256xx_device *bq,
+				struct bq256xx_state *state)
+{
+	unsigned int charger_status_0;
+	unsigned int charger_status_1;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_CHARGER_STATUS_0,
+						&charger_status_0);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_CHARGER_STATUS_1,
+						&charger_status_1);
+	if (ret)
+		return ret;
+
+	state->vbus_stat = charger_status_0 & BQ256XX_VBUS_STAT_MASK;
+	state->chrg_stat = charger_status_0 & BQ256XX_CHRG_STAT_MASK;
+	state->online = charger_status_0 & BQ256XX_PG_STAT_MASK;
+
+	state->wdt_fault = charger_status_1 & BQ256XX_WDT_FAULT_MASK;
+	state->bat_fault = charger_status_1 & BQ256XX_BAT_FAULT_MASK;
+	state->chrg_fault = charger_status_1 & BQ256XX_CHRG_FAULT_MASK;
+	state->ntc_fault = charger_status_1 & BQ256XX_NTC_FAULT_MASK;
+
+	return 0;
+}
+
+static int bq256xx_get_ichg_curr(struct bq256xx_device *bq)
+{
+	unsigned int charge_current_limit;
+	unsigned int ichg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_CHARGE_CURRENT_LIMIT,
+						&charge_current_limit);
+	if (ret)
+		return ret;
+
+	ichg_reg_code = charge_current_limit & BQ256XX_ICHG_MASK;
+
+	return ichg_reg_code * BQ256XX_ICHG_STEP_uA;
+}
+
+static int bq25618_619_get_ichg_curr(struct bq256xx_device *bq)
+{
+	unsigned int charge_current_limit;
+	unsigned int ichg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_CHARGE_CURRENT_LIMIT,
+						&charge_current_limit);
+	if (ret)
+		return ret;
+
+	ichg_reg_code = charge_current_limit & BQ256XX_ICHG_MASK;
+
+	if (ichg_reg_code < BQ25618_ICHG_THRESH)
+		return ichg_reg_code * BQ25618_ICHG_STEP_uA;
+
+	return bq25618_619_ichg_values[ichg_reg_code - BQ25618_ICHG_THRESH];
+}
+
+static int bq256xx_set_ichg_curr(struct bq256xx_device *bq, int ichg)
+{
+	unsigned int ichg_reg_code;
+	int ichg_max = bq->init_data.ichg_max;
+
+	ichg = clamp(ichg, BQ256XX_ICHG_MIN_uA, ichg_max);
+	ichg_reg_code = ichg / BQ256XX_ICHG_STEP_uA;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_CHARGE_CURRENT_LIMIT,
+					BQ256XX_ICHG_MASK, ichg_reg_code);
+}
+
+static int bq25618_619_set_ichg_curr(struct bq256xx_device *bq, int ichg)
+{
+	int array_size = ARRAY_SIZE(bq25618_619_ichg_values);
+	unsigned int ichg_reg_code;
+	int ichg_max = bq->init_data.ichg_max;
+
+	ichg = clamp(ichg, BQ25618_ICHG_MIN_uA, ichg_max);
+
+	if (ichg <= BQ25618_ICHG_THRESH_uA) {
+		ichg_reg_code = ichg / BQ25618_ICHG_STEP_uA;
+	} else {
+		ichg_reg_code = bq256xx_array_parse(array_size, ichg,
+			bq25618_619_ichg_values) + BQ25618_ICHG_THRESH;
+	}
+
+	return regmap_update_bits(bq->regmap, BQ256XX_CHARGE_CURRENT_LIMIT,
+					BQ256XX_ICHG_MASK, ichg_reg_code);
+}
+
+static int bq25618_619_get_chrg_volt(struct bq256xx_device *bq)
+{
+	unsigned int battery_volt_lim;
+	unsigned int vbatreg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+							&battery_volt_lim);
+
+	if (ret)
+		return ret;
+
+	vbatreg_reg_code = (battery_volt_lim & BQ256XX_VBATREG_MASK) >>
+						BQ256XX_VBATREG_BIT_SHIFT;
+
+	if (vbatreg_reg_code > BQ2561X_VBATREG_THRESH)
+		return ((vbatreg_reg_code - BQ2561X_VBATREG_THRESH) *
+					BQ2561X_VBATREG_STEP_uV) +
+					BQ25618_VBATREG_THRESH_uV;
+
+	return bq25618_619_vbatreg_values[vbatreg_reg_code];
+}
+
+static int bq25611d_get_chrg_volt(struct bq256xx_device *bq)
+{
+	unsigned int battery_volt_lim;
+	unsigned int vbatreg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+							&battery_volt_lim);
+	if (ret)
+		return ret;
+
+	vbatreg_reg_code = (battery_volt_lim & BQ256XX_VBATREG_MASK) >>
+						BQ256XX_VBATREG_BIT_SHIFT;
+
+	if (vbatreg_reg_code > BQ2561X_VBATREG_THRESH)
+		return ((vbatreg_reg_code - BQ2561X_VBATREG_THRESH) *
+					BQ2561X_VBATREG_STEP_uV) +
+					BQ25611D_VBATREG_THRESH_uV;
+
+	return bq25611d_vbatreg_values[vbatreg_reg_code];
+}
+
+static int bq2560x_get_chrg_volt(struct bq256xx_device *bq)
+{
+	unsigned int battery_volt_lim;
+	unsigned int vbatreg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+							&battery_volt_lim);
+	if (ret)
+		return ret;
+
+	vbatreg_reg_code = (battery_volt_lim & BQ256XX_VBATREG_MASK) >>
+						BQ256XX_VBATREG_BIT_SHIFT;
+
+	return (vbatreg_reg_code * BQ2560X_VBATREG_STEP_uV)
+					+ BQ2560X_VBATREG_OFFSET_uV;
+}
+
+static int bq25601d_get_chrg_volt(struct bq256xx_device *bq)
+{
+	unsigned int battery_volt_lim;
+	unsigned int vbatreg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+							&battery_volt_lim);
+	if (ret)
+		return ret;
+
+	vbatreg_reg_code = (battery_volt_lim & BQ256XX_VBATREG_MASK) >>
+						BQ256XX_VBATREG_BIT_SHIFT;
+
+	return (vbatreg_reg_code * BQ2560X_VBATREG_STEP_uV)
+					+ BQ25601D_VBATREG_OFFSET_uV;
+}
+
+static int bq25618_619_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
+{
+	int array_size = ARRAY_SIZE(bq25618_619_vbatreg_values);
+	unsigned int vbatreg_reg_code;
+	int vbatreg_max = bq->init_data.vbatreg_max;
+
+	vbatreg = clamp(vbatreg, BQ25618_VBATREG_MIN_uV, vbatreg_max);
+
+	if (vbatreg > BQ25618_VBATREG_THRESH_uV)
+		vbatreg_reg_code = ((vbatreg -
+		BQ25618_VBATREG_THRESH_uV) /
+		(BQ2561X_VBATREG_STEP_uV)) + BQ2561X_VBATREG_THRESH;
+	else {
+		vbatreg_reg_code = bq256xx_array_parse(array_size, vbatreg,
+						bq25618_619_vbatreg_values);
+	}
+
+	return regmap_update_bits(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+				BQ256XX_VBATREG_MASK, vbatreg_reg_code <<
+						BQ256XX_VBATREG_BIT_SHIFT);
+}
+
+static int bq25611d_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
+{
+	int array_size = ARRAY_SIZE(bq25611d_vbatreg_values);
+	unsigned int vbatreg_reg_code;
+	int vbatreg_max = bq->init_data.vbatreg_max;
+
+	vbatreg = clamp(vbatreg, BQ25611D_VBATREG_MIN_uV, vbatreg_max);
+
+	if (vbatreg > BQ25611D_VBATREG_THRESH_uV)
+		vbatreg_reg_code = ((vbatreg -
+		BQ25611D_VBATREG_THRESH_uV) /
+		(BQ2561X_VBATREG_STEP_uV)) + BQ2561X_VBATREG_THRESH;
+	else {
+		vbatreg_reg_code = bq256xx_array_parse(array_size, vbatreg,
+						bq25611d_vbatreg_values);
+	}
+
+	return regmap_update_bits(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+				BQ256XX_VBATREG_MASK, vbatreg_reg_code <<
+						BQ256XX_VBATREG_BIT_SHIFT);
+}
+
+static int bq2560x_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
+{
+	unsigned int vbatreg_reg_code;
+	int vbatreg_max = bq->init_data.vbatreg_max;
+
+	vbatreg = clamp(vbatreg, BQ2560X_VBATREG_MIN_uV, vbatreg_max);
+
+	vbatreg_reg_code = (vbatreg - BQ2560X_VBATREG_OFFSET_uV) /
+						BQ2560X_VBATREG_STEP_uV;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+				BQ256XX_VBATREG_MASK, vbatreg_reg_code <<
+						BQ256XX_VBATREG_BIT_SHIFT);
+}
+
+static int bq25601d_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
+{
+	unsigned int vbatreg_reg_code;
+	int vbatreg_max = bq->init_data.vbatreg_max;
+
+	vbatreg = clamp(vbatreg, BQ25601D_VBATREG_MIN_uV, vbatreg_max);
+
+	vbatreg_reg_code = (vbatreg - BQ25601D_VBATREG_OFFSET_uV) /
+						BQ2560X_VBATREG_STEP_uV;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_BATTERY_VOLTAGE_LIMIT,
+				BQ256XX_VBATREG_MASK, vbatreg_reg_code <<
+						BQ256XX_VBATREG_BIT_SHIFT);
+}
+
+static int bq256xx_get_prechrg_curr(struct bq256xx_device *bq)
+{
+	unsigned int prechg_and_term_curr_lim;
+	unsigned int iprechg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+						&prechg_and_term_curr_lim);
+	if (ret)
+		return ret;
+
+	iprechg_reg_code = (prechg_and_term_curr_lim & BQ256XX_IPRECHG_MASK)
+						>> BQ256XX_IPRECHG_BIT_SHIFT;
+
+	return (iprechg_reg_code * BQ256XX_IPRECHG_STEP_uA) +
+						BQ256XX_IPRECHG_OFFSET_uA;
+}
+
+static int bq256xx_set_prechrg_curr(struct bq256xx_device *bq, int iprechg)
+{
+	unsigned int iprechg_reg_code;
+
+	iprechg = clamp(iprechg, BQ256XX_IPRECHG_MIN_uA,
+						BQ256XX_IPRECHG_MAX_uA);
+
+	iprechg_reg_code = ((iprechg - BQ256XX_IPRECHG_OFFSET_uA) /
+			BQ256XX_IPRECHG_STEP_uA) << BQ256XX_IPRECHG_BIT_SHIFT;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+				BQ256XX_IPRECHG_MASK, iprechg_reg_code);
+}
+
+static int bq25618_619_get_prechrg_curr(struct bq256xx_device *bq)
+{
+	unsigned int prechg_and_term_curr_lim;
+	unsigned int iprechg_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+						&prechg_and_term_curr_lim);
+	if (ret)
+		return ret;
+
+	iprechg_reg_code = (prechg_and_term_curr_lim & BQ256XX_IPRECHG_MASK)
+						>> BQ256XX_IPRECHG_BIT_SHIFT;
+
+	return (iprechg_reg_code * BQ25618_IPRECHG_STEP_uA) +
+						BQ25618_IPRECHG_OFFSET_uA;
+}
+
+static int bq25618_619_set_prechrg_curr(struct bq256xx_device *bq, int iprechg)
+{
+	unsigned int iprechg_reg_code;
+
+	iprechg = clamp(iprechg, BQ25618_IPRECHG_MIN_uA,
+						BQ25618_IPRECHG_MAX_uA);
+
+	iprechg_reg_code = ((iprechg - BQ25618_IPRECHG_OFFSET_uA) /
+			BQ25618_IPRECHG_STEP_uA) << BQ256XX_IPRECHG_BIT_SHIFT;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+				BQ256XX_IPRECHG_MASK, iprechg_reg_code);
+}
+
+static int bq256xx_get_term_curr(struct bq256xx_device *bq)
+{
+	unsigned int prechg_and_term_curr_lim;
+	unsigned int iterm_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+						&prechg_and_term_curr_lim);
+	if (ret)
+		return ret;
+
+	iterm_reg_code = prechg_and_term_curr_lim & BQ256XX_ITERM_MASK;
+
+	return (iterm_reg_code * BQ256XX_ITERM_STEP_uA) +
+						BQ256XX_ITERM_OFFSET_uA;
+}
+
+static int bq256xx_set_term_curr(struct bq256xx_device *bq, int iterm)
+{
+	unsigned int iterm_reg_code;
+
+	iterm = clamp(iterm, BQ256XX_ITERM_MIN_uA, BQ256XX_ITERM_MAX_uA);
+
+	iterm_reg_code = (iterm - BQ256XX_ITERM_OFFSET_uA) /
+							BQ256XX_ITERM_STEP_uA;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+				BQ256XX_ITERM_MASK, iterm_reg_code);
+}
+
+static int bq25618_619_get_term_curr(struct bq256xx_device *bq)
+{
+	unsigned int prechg_and_term_curr_lim;
+	unsigned int iterm_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+						&prechg_and_term_curr_lim);
+	if (ret)
+		return ret;
+
+	iterm_reg_code = prechg_and_term_curr_lim & BQ256XX_ITERM_MASK;
+
+	return (iterm_reg_code * BQ25618_ITERM_STEP_uA) +
+						BQ25618_ITERM_OFFSET_uA;
+}
+
+static int bq25618_619_set_term_curr(struct bq256xx_device *bq, int iterm)
+{
+	unsigned int iterm_reg_code;
+
+	iterm = clamp(iterm, BQ25618_ITERM_MIN_uA, BQ25618_ITERM_MAX_uA);
+
+	iterm_reg_code = (iterm - BQ25618_ITERM_OFFSET_uA) /
+							BQ25618_ITERM_STEP_uA;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_PRECHG_AND_TERM_CURR_LIM,
+				BQ256XX_ITERM_MASK, iterm_reg_code);
+}
+
+static int bq256xx_get_input_volt_lim(struct bq256xx_device *bq)
+{
+	unsigned int charger_control_2;
+	unsigned int vindpm_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_CHARGER_CONTROL_2,
+						&charger_control_2);
+	if (ret)
+		return ret;
+
+	vindpm_reg_code = charger_control_2 & BQ256XX_VINDPM_MASK;
+
+	return (vindpm_reg_code * BQ256XX_VINDPM_STEP_uV) +
+						BQ256XX_VINDPM_OFFSET_uV;
+}
+
+static int bq256xx_set_input_volt_lim(struct bq256xx_device *bq, int vindpm)
+{
+	unsigned int vindpm_reg_code;
+
+	vindpm = clamp(vindpm, BQ256XX_VINDPM_MIN_uV, BQ256XX_VINDPM_MAX_uV);
+
+	vindpm_reg_code = (vindpm - BQ256XX_VINDPM_OFFSET_uV) /
+						BQ256XX_VINDPM_STEP_uV;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_CHARGER_CONTROL_2,
+					BQ256XX_VINDPM_MASK, vindpm_reg_code);
+}
+
+static int bq256xx_get_input_curr_lim(struct bq256xx_device *bq)
+{
+	unsigned int input_current_limit;
+	unsigned int iindpm_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ256XX_INPUT_CURRENT_LIMIT,
+						&input_current_limit);
+	if (ret)
+		return ret;
+
+	iindpm_reg_code = input_current_limit & BQ256XX_IINDPM_MASK;
+
+	return (iindpm_reg_code * BQ256XX_IINDPM_STEP_uA) +
+						BQ256XX_IINDPM_OFFSET_uA;
+}
+
+static int bq256xx_set_input_curr_lim(struct bq256xx_device *bq, int iindpm)
+{
+	unsigned int iindpm_reg_code;
+
+	iindpm = clamp(iindpm, BQ256XX_IINDPM_MIN_uA, BQ256XX_IINDPM_MAX_uA);
+
+	iindpm_reg_code = (iindpm - BQ256XX_IINDPM_OFFSET_uA) /
+							BQ256XX_IINDPM_STEP_uA;
+
+	return regmap_update_bits(bq->regmap, BQ256XX_INPUT_CURRENT_LIMIT,
+					BQ256XX_IINDPM_MASK, iindpm_reg_code);
+}
+
+static void bq256xx_charger_reset(void *data)
+{
+	struct bq256xx_device *bq = data;
+
+	regmap_update_bits(bq->regmap, BQ256XX_PART_INFORMATION,
+					BQ256XX_REG_RST, BQ256XX_REG_RST);
+
+	if (!IS_ERR_OR_NULL(bq->usb2_phy))
+		usb_unregister_notifier(bq->usb2_phy, &bq->usb_nb);
+
+	if (!IS_ERR_OR_NULL(bq->usb3_phy))
+		usb_unregister_notifier(bq->usb3_phy, &bq->usb_nb);
+}
+
+static int bq256xx_set_charger_property(struct power_supply *psy,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct bq256xx_device *bq = power_supply_get_drvdata(psy);
+	int ret = -EINVAL;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq->chip_info->bq256xx_set_iindpm(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq->chip_info->bq256xx_set_vbatreg(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq->chip_info->bq256xx_set_ichg(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq->chip_info->bq256xx_set_iprechg(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq->chip_info->bq256xx_set_iterm(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = bq->chip_info->bq256xx_set_vindpm(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+
+static int bq256xx_get_battery_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct bq256xx_device *bq = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = bq->init_data.ichg_max;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = bq->init_data.vbatreg_max;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq256xx_get_charger_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct bq256xx_device *bq = power_supply_get_drvdata(psy);
+	struct bq256xx_state state;
+	int ret = 0;
+
+	mutex_lock(&bq->lock);
+	ret = bq256xx_get_state(bq, &state);
+	mutex_unlock(&bq->lock);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (state.vbus_stat == BQ256XX_VBUS_STAT_NO_INPUT ||
+		    state.vbus_stat == BQ256XX_VBUS_STAT_USB_OTG)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (state.chrg_stat == BQ256XX_CHRG_STAT_NOT_CHRGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (state.chrg_stat == BQ256XX_CHRG_STAT_CHRG_TERM)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		if (state.wdt_fault) {
+			val->intval =
+				POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
+		} else if (state.bat_fault) {
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		} else {
+			switch (state.chrg_stat) {
+			case BQ256XX_CHRG_FAULT_INPUT:
+				val->intval =
+					POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+				break;
+			case BQ256XX_CHRG_FAULT_THERM:
+				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+				break;
+			case BQ256XX_CHRG_FAULT_CST_EXPIRE:
+				val->intval =
+				POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+				break;
+			default:
+				break;
+			}
+
+			switch (state.ntc_fault) {
+			case BQ256XX_NTC_FAULT_WARM:
+				val->intval = POWER_SUPPLY_HEALTH_WARM;
+				break;
+			case BQ256XX_NTC_FAULT_COOL:
+				val->intval = POWER_SUPPLY_HEALTH_COOL;
+				break;
+			case BQ256XX_NTC_FAULT_COLD:
+				val->intval = POWER_SUPPLY_HEALTH_COLD;
+				break;
+			case BQ256XX_NTC_FAULT_HOT:
+				val->intval = POWER_SUPPLY_HEALTH_HOT;
+				break;
+			default:
+				val->intval = POWER_SUPPLY_HEALTH_GOOD;
+				break;
+			}
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		if (bq->chip_info->has_usb_detect) {
+			switch (state.vbus_stat) {
+			case BQ256XX_VBUS_STAT_USB_SDP:
+				val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+				break;
+			case BQ256XX_VBUS_STAT_USB_CDP:
+				val->intval = POWER_SUPPLY_USB_TYPE_CDP;
+				break;
+			case BQ256XX_VBUS_STAT_USB_DCP:
+				val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+				break;
+			case BQ256XX_VBUS_STAT_USB_OTG:
+				val->intval = POWER_SUPPLY_USB_TYPE_ACA;
+				break;
+			default:
+				val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+				break;
+			}
+		} else {
+			switch (state.vbus_stat) {
+			case BQ256XX_VBUS_STAT_USB_SDP:
+				val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+				break;
+			case BQ256XX_VBUS_STAT_USB_OTG:
+				val->intval = POWER_SUPPLY_USB_TYPE_ACA;
+				break;
+			default:
+				val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+				break;
+			}
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		switch (state.chrg_stat) {
+		case BQ256XX_CHRG_STAT_NOT_CHRGING:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		case BQ256XX_CHRG_STAT_PRECHRGING:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case BQ256XX_CHRG_STAT_FAST_CHRGING:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case BQ256XX_CHRG_STAT_CHRG_TERM:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ256XX_MANUFACTURER;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq->model_name;
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = state.online;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = bq->chip_info->bq256xx_get_vindpm(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq->chip_info->bq256xx_get_iindpm(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq->chip_info->bq256xx_get_vbatreg(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq->chip_info->bq256xx_get_ichg(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = bq->chip_info->bq256xx_get_iprechg(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = bq->chip_info->bq256xx_get_iterm(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static bool bq256xx_state_changed(struct bq256xx_device *bq,
+				  struct bq256xx_state *new_state)
+{
+	struct bq256xx_state old_state;
+
+	mutex_lock(&bq->lock);
+	old_state = bq->state;
+	mutex_unlock(&bq->lock);
+
+	return memcmp(&old_state, new_state, sizeof(struct bq256xx_state)) != 0;
+}
+
+static irqreturn_t bq256xx_irq_handler_thread(int irq, void *private)
+{
+	struct bq256xx_device *bq = private;
+	struct bq256xx_state state;
+	int ret;
+
+	ret = bq256xx_get_state(bq, &state);
+	if (ret < 0)
+		goto irq_out;
+
+	if (!bq256xx_state_changed(bq, &state))
+		goto irq_out;
+
+	mutex_lock(&bq->lock);
+	bq->state = state;
+	mutex_unlock(&bq->lock);
+
+	power_supply_changed(bq->charger);
+
+irq_out:
+	return IRQ_HANDLED;
+}
+
+static enum power_supply_property bq256xx_power_supply_props[] = {
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static enum power_supply_property bq256xx_battery_props[] = {
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static int bq256xx_property_is_writeable(struct power_supply *psy,
+					 enum power_supply_property prop)
+{
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct power_supply_desc bq256xx_power_supply_desc = {
+	.name = "bq256xx-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.usb_types = bq256xx_usb_type,
+	.num_usb_types = ARRAY_SIZE(bq256xx_usb_type),
+	.properties = bq256xx_power_supply_props,
+	.num_properties = ARRAY_SIZE(bq256xx_power_supply_props),
+	.get_property = bq256xx_get_charger_property,
+	.set_property = bq256xx_set_charger_property,
+	.property_is_writeable = bq256xx_property_is_writeable,
+};
+
+static struct power_supply_desc bq256xx_battery_desc = {
+	.name			= "bq256xx-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= bq256xx_get_battery_property,
+	.properties		= bq256xx_battery_props,
+	.num_properties		= ARRAY_SIZE(bq256xx_battery_props),
+	.property_is_writeable	= bq256xx_property_is_writeable,
+};
+
+
+static bool bq256xx_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BQ256XX_INPUT_CURRENT_LIMIT:
+	case BQ256XX_CHARGER_STATUS_0...BQ256XX_CHARGER_STATUS_2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bq25600_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ256XX_PART_INFORMATION,
+	.reg_defaults	= bq2560x_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq2560x_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+	.volatile_reg = bq256xx_is_volatile_reg,
+};
+
+static const struct regmap_config bq25611d_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ256XX_CHARGER_CONTROL_4,
+	.reg_defaults	= bq25611d_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq25611d_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+	.volatile_reg = bq256xx_is_volatile_reg,
+};
+
+static const struct regmap_config bq25618_619_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ256XX_CHARGER_CONTROL_4,
+	.reg_defaults	= bq25618_619_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq25618_619_reg_defs),
+	.cache_type = REGCACHE_FLAT,
+	.volatile_reg = bq256xx_is_volatile_reg,
+};
+
+static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
+	[BQ25600] = {
+		.model_id = BQ25600,
+		.bq256xx_regmap_config = &bq25600_regmap_config,
+		.bq256xx_get_ichg = bq256xx_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq2560x_get_chrg_volt,
+		.bq256xx_get_iterm = bq256xx_get_term_curr,
+		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq2560x_set_chrg_volt,
+		.bq256xx_set_iterm = bq256xx_set_term_curr,
+		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ2560X_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ256XX_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ256XX_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ256XX_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ2560X_VBATREG_MAX_uV,
+
+		.has_usb_detect = false,
+	},
+
+	[BQ25600D] = {
+		.model_id = BQ25600D,
+		.bq256xx_regmap_config = &bq25600_regmap_config,
+		.bq256xx_get_ichg = bq256xx_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq2560x_get_chrg_volt,
+		.bq256xx_get_iterm = bq256xx_get_term_curr,
+		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq2560x_set_chrg_volt,
+		.bq256xx_set_iterm = bq256xx_set_term_curr,
+		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ2560X_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ256XX_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ256XX_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ256XX_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ2560X_VBATREG_MAX_uV,
+
+		.has_usb_detect = true,
+	},
+
+	[BQ25601] = {
+		.model_id = BQ25601,
+		.bq256xx_regmap_config = &bq25600_regmap_config,
+		.bq256xx_get_ichg = bq256xx_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq2560x_get_chrg_volt,
+		.bq256xx_get_iterm = bq256xx_get_term_curr,
+		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq2560x_set_chrg_volt,
+		.bq256xx_set_iterm = bq256xx_set_term_curr,
+		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ2560X_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ256XX_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ256XX_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ256XX_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ2560X_VBATREG_MAX_uV,
+
+		.has_usb_detect = false,
+	},
+
+	[BQ25601D] = {
+		.model_id = BQ25601D,
+		.bq256xx_regmap_config = &bq25600_regmap_config,
+		.bq256xx_get_ichg = bq256xx_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq25601d_get_chrg_volt,
+		.bq256xx_get_iterm = bq256xx_get_term_curr,
+		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq25601d_set_chrg_volt,
+		.bq256xx_set_iterm = bq256xx_set_term_curr,
+		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ2560X_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ256XX_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ256XX_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ256XX_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ2560X_VBATREG_MAX_uV,
+
+		.has_usb_detect = true,
+	},
+
+	[BQ25611D] = {
+		.model_id = BQ25611D,
+		.bq256xx_regmap_config = &bq25611d_regmap_config,
+		.bq256xx_get_ichg = bq256xx_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq25611d_get_chrg_volt,
+		.bq256xx_get_iterm = bq256xx_get_term_curr,
+		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq25611d_set_chrg_volt,
+		.bq256xx_set_iterm = bq256xx_set_term_curr,
+		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ25611D_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ25611D_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ256XX_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ256XX_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ256XX_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ25611D_VBATREG_MAX_uV,
+
+		.has_usb_detect = true,
+	},
+
+	[BQ25618] = {
+		.model_id = BQ25618,
+		.bq256xx_regmap_config = &bq25618_619_regmap_config,
+		.bq256xx_get_ichg = bq25618_619_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq25618_619_get_chrg_volt,
+		.bq256xx_get_iterm = bq25618_619_get_term_curr,
+		.bq256xx_get_iprechg = bq25618_619_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq25618_619_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq25618_619_set_chrg_volt,
+		.bq256xx_set_iterm = bq25618_619_set_term_curr,
+		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ25618_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ25618_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ25618_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ25618_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ25618_VBATREG_MAX_uV,
+
+		.has_usb_detect = false,
+	},
+
+	[BQ25619] = {
+		.model_id = BQ25619,
+		.bq256xx_regmap_config = &bq25618_619_regmap_config,
+		.bq256xx_get_ichg = bq25618_619_get_ichg_curr,
+		.bq256xx_get_iindpm = bq256xx_get_input_curr_lim,
+		.bq256xx_get_vbatreg = bq25618_619_get_chrg_volt,
+		.bq256xx_get_iterm = bq25618_619_get_term_curr,
+		.bq256xx_get_iprechg = bq25618_619_get_prechrg_curr,
+		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+
+		.bq256xx_set_ichg = bq25618_619_set_ichg_curr,
+		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
+		.bq256xx_set_vbatreg = bq25618_619_set_chrg_volt,
+		.bq256xx_set_iterm = bq25618_619_set_term_curr,
+		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
+		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+
+		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
+		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
+		.bq256xx_def_vbatreg = BQ25618_VBATREG_DEF_uV,
+		.bq256xx_def_iterm = BQ25618_ITERM_DEF_uA,
+		.bq256xx_def_iprechg = BQ25618_IPRECHG_DEF_uA,
+		.bq256xx_def_vindpm = BQ256XX_VINDPM_DEF_uV,
+
+		.bq256xx_max_ichg = BQ25618_ICHG_MAX_uA,
+		.bq256xx_max_vbatreg = BQ25618_VBATREG_MAX_uV,
+
+		.has_usb_detect = false,
+	},
+};
+
+static int bq256xx_power_supply_init(struct bq256xx_device *bq,
+		struct power_supply_config *psy_cfg, struct device *dev)
+{
+	bq->charger = devm_power_supply_register(bq->dev,
+						 &bq256xx_power_supply_desc,
+						 psy_cfg);
+	if (IS_ERR(bq->charger)) {
+		dev_err(dev, "power supply register charger failed\n");
+		return PTR_ERR(bq->charger);
+	}
+
+	bq->battery = devm_power_supply_register(bq->dev,
+						      &bq256xx_battery_desc,
+						      psy_cfg);
+	if (IS_ERR(bq->battery)) {
+		dev_err(dev, "power supply register battery failed\n");
+		return PTR_ERR(bq->battery);
+	}
+	return 0;
+}
+
+static int bq256xx_hw_init(struct bq256xx_device *bq)
+{
+	struct power_supply_battery_info *bat_info;
+	int wd_reg_val = BQ256XX_WATCHDOG_DIS;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < BQ256XX_NUM_WD_VAL; i++) {
+		if (bq->watchdog_timer == bq256xx_watchdog_time[i]) {
+			wd_reg_val = i;
+			break;
+		}
+		if (i + 1 < BQ256XX_NUM_WD_VAL &&
+		    bq->watchdog_timer > bq256xx_watchdog_time[i] &&
+		    bq->watchdog_timer < bq256xx_watchdog_time[i + 1])
+			wd_reg_val = i;
+	}
+	ret = regmap_update_bits(bq->regmap, BQ256XX_CHARGER_CONTROL_1,
+				 BQ256XX_WATCHDOG_MASK, wd_reg_val <<
+						BQ256XX_WDT_BIT_SHIFT);
+	if (ret)
+		return ret;
+
+	ret = power_supply_get_battery_info(bq->charger, &bat_info);
+	if (ret == -ENOMEM)
+		return ret;
+
+	if (ret) {
+		dev_warn(bq->dev, "battery info missing, default values will be applied\n");
+
+		bat_info->constant_charge_current_max_ua =
+				bq->chip_info->bq256xx_def_ichg;
+
+		bat_info->constant_charge_voltage_max_uv =
+				bq->chip_info->bq256xx_def_vbatreg;
+
+		bat_info->precharge_current_ua =
+				bq->chip_info->bq256xx_def_iprechg;
+
+		bat_info->charge_term_current_ua =
+				bq->chip_info->bq256xx_def_iterm;
+
+		bq->init_data.ichg_max =
+				bq->chip_info->bq256xx_max_ichg;
+
+		bq->init_data.vbatreg_max =
+				bq->chip_info->bq256xx_max_vbatreg;
+	} else {
+		bq->init_data.ichg_max =
+			bat_info->constant_charge_current_max_ua;
+
+		bq->init_data.vbatreg_max =
+			bat_info->constant_charge_voltage_max_uv;
+	}
+
+	ret = bq->chip_info->bq256xx_set_vindpm(bq, bq->init_data.vindpm);
+	if (ret)
+		return ret;
+
+	ret = bq->chip_info->bq256xx_set_iindpm(bq, bq->init_data.iindpm);
+	if (ret)
+		return ret;
+
+	ret = bq->chip_info->bq256xx_set_ichg(bq,
+				bat_info->constant_charge_current_max_ua);
+	if (ret)
+		return ret;
+
+	ret = bq->chip_info->bq256xx_set_iprechg(bq,
+				bat_info->precharge_current_ua);
+	if (ret)
+		return ret;
+
+	ret = bq->chip_info->bq256xx_set_vbatreg(bq,
+				bat_info->constant_charge_voltage_max_uv);
+	if (ret)
+		return ret;
+
+	ret = bq->chip_info->bq256xx_set_iterm(bq,
+				bat_info->charge_term_current_ua);
+	if (ret)
+		return ret;
+
+	power_supply_put_battery_info(bq->charger, bat_info);
+
+	return 0;
+}
+
+static int bq256xx_parse_dt(struct bq256xx_device *bq,
+		struct power_supply_config *psy_cfg, struct device *dev)
+{
+	int ret = 0;
+
+	psy_cfg->drv_data = bq;
+	psy_cfg->of_node = dev->of_node;
+
+	ret = device_property_read_u32(bq->dev, "ti,watchdog-timeout-ms",
+				       &bq->watchdog_timer);
+	if (ret)
+		bq->watchdog_timer = BQ256XX_WATCHDOG_DIS;
+
+	if (bq->watchdog_timer > BQ256XX_WATCHDOG_MAX ||
+	    bq->watchdog_timer < BQ256XX_WATCHDOG_DIS)
+		return -EINVAL;
+
+	ret = device_property_read_u32(bq->dev,
+				       "input-voltage-limit-microvolt",
+				       &bq->init_data.vindpm);
+	if (ret)
+		bq->init_data.vindpm = bq->chip_info->bq256xx_def_vindpm;
+
+	ret = device_property_read_u32(bq->dev,
+				       "input-current-limit-microamp",
+				       &bq->init_data.iindpm);
+	if (ret)
+		bq->init_data.iindpm = bq->chip_info->bq256xx_def_iindpm;
+
+	return 0;
+}
+
+static int bq256xx_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct bq256xx_device *bq;
+	struct power_supply_config psy_cfg = { };
+
+	int ret;
+
+	bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq)
+		return -ENOMEM;
+
+	bq->client = client;
+	bq->dev = dev;
+	bq->chip_info = &bq256xx_chip_info_tbl[id->driver_data];
+
+	mutex_init(&bq->lock);
+
+	strncpy(bq->model_name, id->name, I2C_NAME_SIZE);
+
+	bq->regmap = devm_regmap_init_i2c(client,
+					bq->chip_info->bq256xx_regmap_config);
+
+	if (IS_ERR(bq->regmap)) {
+		dev_err(dev, "Failed to allocate register map\n");
+		return PTR_ERR(bq->regmap);
+	}
+
+	i2c_set_clientdata(client, bq);
+
+	ret = bq256xx_parse_dt(bq, &psy_cfg, dev);
+	if (ret) {
+		dev_err(dev, "Failed to read device tree properties%d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, bq256xx_charger_reset, bq);
+	if (ret)
+		return ret;
+
+	/* OTG reporting */
+	bq->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (!IS_ERR_OR_NULL(bq->usb2_phy)) {
+		INIT_WORK(&bq->usb_work, bq256xx_usb_work);
+		bq->usb_nb.notifier_call = bq256xx_usb_notifier;
+		usb_register_notifier(bq->usb2_phy, &bq->usb_nb);
+	}
+
+	bq->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
+	if (!IS_ERR_OR_NULL(bq->usb3_phy)) {
+		INIT_WORK(&bq->usb_work, bq256xx_usb_work);
+		bq->usb_nb.notifier_call = bq256xx_usb_notifier;
+		usb_register_notifier(bq->usb3_phy, &bq->usb_nb);
+	}
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						bq256xx_irq_handler_thread,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						dev_name(&client->dev), bq);
+		if (ret < 0) {
+			dev_err(dev, "get irq fail: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = bq256xx_power_supply_init(bq, &psy_cfg, dev);
+	if (ret) {
+		dev_err(dev, "Failed to register power supply\n");
+		return ret;
+	}
+
+	ret = bq256xx_hw_init(bq);
+	if (ret) {
+		dev_err(dev, "Cannot initialize the chip.\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct i2c_device_id bq256xx_i2c_ids[] = {
+	{ "bq25600", BQ25600 },
+	{ "bq25600d", BQ25600D },
+	{ "bq25601", BQ25601 },
+	{ "bq25601d", BQ25601D },
+	{ "bq25611d", BQ25611D },
+	{ "bq25618", BQ25618 },
+	{ "bq25619", BQ25619 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq256xx_i2c_ids);
+
+static const struct of_device_id bq256xx_of_match[] = {
+	{ .compatible = "ti,bq25600", .data = (void *)BQ25600 },
+	{ .compatible = "ti,bq25600d", .data = (void *)BQ25600D },
+	{ .compatible = "ti,bq25601", .data = (void *)BQ25601 },
+	{ .compatible = "ti,bq25601d", .data = (void *)BQ25601D },
+	{ .compatible = "ti,bq25611d", .data = (void *)BQ25611D },
+	{ .compatible = "ti,bq25618", .data = (void *)BQ25618 },
+	{ .compatible = "ti,bq25619", .data = (void *)BQ25619 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq256xx_of_match);
+
+static const struct acpi_device_id bq256xx_acpi_match[] = {
+	{ "bq25600", BQ25600 },
+	{ "bq25600d", BQ25600D },
+	{ "bq25601", BQ25601 },
+	{ "bq25601d", BQ25601D },
+	{ "bq25611d", BQ25611D },
+	{ "bq25618", BQ25618 },
+	{ "bq25619", BQ25619 },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, bq256xx_acpi_match);
+
+static struct i2c_driver bq256xx_driver = {
+	.driver = {
+		.name = "bq256xx-charger",
+		.of_match_table = bq256xx_of_match,
+		.acpi_match_table = bq256xx_acpi_match,
+	},
+	.probe = bq256xx_probe,
+	.id_table = bq256xx_i2c_ids,
+};
+module_i2c_driver(bq256xx_driver);
+
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
+MODULE_DESCRIPTION("bq256xx charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
new file mode 100644
index 000000000..ee6e28f1d
--- /dev/null
+++ b/drivers/power/supply/bq25890_charger.c
@@ -0,0 +1,1448 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI BQ25890 charger driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/power/bq25890_charger.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/usb/phy.h>
+
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+#define BQ25890_MANUFACTURER		"Texas Instruments"
+#define BQ25890_IRQ_PIN			"bq25890_irq"
+
+#define BQ25890_ID			3
+#define BQ25895_ID			7
+#define BQ25896_ID			0
+
+#define PUMP_EXPRESS_START_DELAY	(5 * HZ)
+#define PUMP_EXPRESS_MAX_TRIES		6
+#define PUMP_EXPRESS_VBUS_MARGIN_uV	1000000
+
+enum bq25890_chip_version {
+	BQ25890,
+	BQ25892,
+	BQ25895,
+	BQ25896,
+};
+
+static const char *const bq25890_chip_name[] = {
+	"BQ25890",
+	"BQ25892",
+	"BQ25895",
+	"BQ25896",
+};
+
+enum bq25890_fields {
+	F_EN_HIZ, F_EN_ILIM, F_IINLIM,				     /* Reg00 */
+	F_BHOT, F_BCOLD, F_VINDPM_OFS,				     /* Reg01 */
+	F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
+	F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN,	     /* Reg02 */
+	F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,
+	F_MIN_VBAT_SEL,						     /* Reg03 */
+	F_PUMPX_EN, F_ICHG,					     /* Reg04 */
+	F_IPRECHG, F_ITERM,					     /* Reg05 */
+	F_VREG, F_BATLOWV, F_VRECHG,				     /* Reg06 */
+	F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR,
+	F_JEITA_ISET,						     /* Reg07 */
+	F_BATCMP, F_VCLAMP, F_TREG,				     /* Reg08 */
+	F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
+	F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN,	     /* Reg09 */
+	F_BOOSTV, F_PFM_OTG_DIS, F_BOOSTI,			     /* Reg0A */
+	F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_0B_RSVD,
+	F_VSYS_STAT,						     /* Reg0B */
+	F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
+	F_NTC_FAULT,						     /* Reg0C */
+	F_FORCE_VINDPM, F_VINDPM,				     /* Reg0D */
+	F_THERM_STAT, F_BATV,					     /* Reg0E */
+	F_SYSV,							     /* Reg0F */
+	F_TSPCT,						     /* Reg10 */
+	F_VBUS_GD, F_VBUSV,					     /* Reg11 */
+	F_ICHGR,						     /* Reg12 */
+	F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM,			     /* Reg13 */
+	F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV,   /* Reg14 */
+
+	F_MAX_FIELDS
+};
+
+/* initial field values, converted to register values */
+struct bq25890_init_data {
+	u8 ichg;	/* charge current		*/
+	u8 vreg;	/* regulation voltage		*/
+	u8 iterm;	/* termination current		*/
+	u8 iprechg;	/* precharge current		*/
+	u8 sysvmin;	/* minimum system voltage limit */
+	u8 boostv;	/* boost regulation voltage	*/
+	u8 boosti;	/* boost current limit		*/
+	u8 boostf;	/* boost frequency		*/
+	u8 ilim_en;	/* enable ILIM pin		*/
+	u8 treg;	/* thermal regulation threshold */
+	u8 rbatcomp;	/* IBAT sense resistor value    */
+	u8 vclamp;	/* IBAT compensation voltage limit */
+};
+
+struct bq25890_state {
+	u8 online;
+	u8 chrg_status;
+	u8 chrg_fault;
+	u8 vsys_status;
+	u8 boost_fault;
+	u8 bat_fault;
+	u8 ntc_fault;
+};
+
+struct bq25890_device {
+	struct i2c_client *client;
+	struct device *dev;
+	struct power_supply *charger;
+
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_nb;
+	struct work_struct usb_work;
+	struct delayed_work pump_express_work;
+	unsigned long usb_event;
+
+	struct regmap *rmap;
+	struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+	bool skip_reset;
+	bool read_back_init_data;
+	u32 pump_express_vbus_max;
+	enum bq25890_chip_version chip_version;
+	struct bq25890_init_data init_data;
+	struct bq25890_state state;
+
+	struct mutex lock; /* protect state data */
+};
+
+static const struct regmap_range bq25890_readonly_reg_ranges[] = {
+	regmap_reg_range(0x0b, 0x0c),
+	regmap_reg_range(0x0e, 0x13),
+};
+
+static const struct regmap_access_table bq25890_writeable_regs = {
+	.no_ranges = bq25890_readonly_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges),
+};
+
+static const struct regmap_range bq25890_volatile_reg_ranges[] = {
+	regmap_reg_range(0x00, 0x00),
+	regmap_reg_range(0x02, 0x02),
+	regmap_reg_range(0x09, 0x09),
+	regmap_reg_range(0x0b, 0x14),
+};
+
+static const struct regmap_access_table bq25890_volatile_regs = {
+	.yes_ranges = bq25890_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges),
+};
+
+static const struct regmap_config bq25890_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0x14,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &bq25890_writeable_regs,
+	.volatile_table = &bq25890_volatile_regs,
+};
+
+static const struct reg_field bq25890_reg_fields[] = {
+	/* REG00 */
+	[F_EN_HIZ]		= REG_FIELD(0x00, 7, 7),
+	[F_EN_ILIM]		= REG_FIELD(0x00, 6, 6),
+	[F_IINLIM]		= REG_FIELD(0x00, 0, 5),
+	/* REG01 */
+	[F_BHOT]		= REG_FIELD(0x01, 6, 7),
+	[F_BCOLD]		= REG_FIELD(0x01, 5, 5),
+	[F_VINDPM_OFS]		= REG_FIELD(0x01, 0, 4),
+	/* REG02 */
+	[F_CONV_START]		= REG_FIELD(0x02, 7, 7),
+	[F_CONV_RATE]		= REG_FIELD(0x02, 6, 6),
+	[F_BOOSTF]		= REG_FIELD(0x02, 5, 5),
+	[F_ICO_EN]		= REG_FIELD(0x02, 4, 4),
+	[F_HVDCP_EN]		= REG_FIELD(0x02, 3, 3),  // reserved on BQ25896
+	[F_MAXC_EN]		= REG_FIELD(0x02, 2, 2),  // reserved on BQ25896
+	[F_FORCE_DPM]		= REG_FIELD(0x02, 1, 1),
+	[F_AUTO_DPDM_EN]	= REG_FIELD(0x02, 0, 0),
+	/* REG03 */
+	[F_BAT_LOAD_EN]		= REG_FIELD(0x03, 7, 7),
+	[F_WD_RST]		= REG_FIELD(0x03, 6, 6),
+	[F_OTG_CFG]		= REG_FIELD(0x03, 5, 5),
+	[F_CHG_CFG]		= REG_FIELD(0x03, 4, 4),
+	[F_SYSVMIN]		= REG_FIELD(0x03, 1, 3),
+	[F_MIN_VBAT_SEL]	= REG_FIELD(0x03, 0, 0), // BQ25896 only
+	/* REG04 */
+	[F_PUMPX_EN]		= REG_FIELD(0x04, 7, 7),
+	[F_ICHG]		= REG_FIELD(0x04, 0, 6),
+	/* REG05 */
+	[F_IPRECHG]		= REG_FIELD(0x05, 4, 7),
+	[F_ITERM]		= REG_FIELD(0x05, 0, 3),
+	/* REG06 */
+	[F_VREG]		= REG_FIELD(0x06, 2, 7),
+	[F_BATLOWV]		= REG_FIELD(0x06, 1, 1),
+	[F_VRECHG]		= REG_FIELD(0x06, 0, 0),
+	/* REG07 */
+	[F_TERM_EN]		= REG_FIELD(0x07, 7, 7),
+	[F_STAT_DIS]		= REG_FIELD(0x07, 6, 6),
+	[F_WD]			= REG_FIELD(0x07, 4, 5),
+	[F_TMR_EN]		= REG_FIELD(0x07, 3, 3),
+	[F_CHG_TMR]		= REG_FIELD(0x07, 1, 2),
+	[F_JEITA_ISET]		= REG_FIELD(0x07, 0, 0), // reserved on BQ25895
+	/* REG08 */
+	[F_BATCMP]		= REG_FIELD(0x08, 5, 7),
+	[F_VCLAMP]		= REG_FIELD(0x08, 2, 4),
+	[F_TREG]		= REG_FIELD(0x08, 0, 1),
+	/* REG09 */
+	[F_FORCE_ICO]		= REG_FIELD(0x09, 7, 7),
+	[F_TMR2X_EN]		= REG_FIELD(0x09, 6, 6),
+	[F_BATFET_DIS]		= REG_FIELD(0x09, 5, 5),
+	[F_JEITA_VSET]		= REG_FIELD(0x09, 4, 4), // reserved on BQ25895
+	[F_BATFET_DLY]		= REG_FIELD(0x09, 3, 3),
+	[F_BATFET_RST_EN]	= REG_FIELD(0x09, 2, 2),
+	[F_PUMPX_UP]		= REG_FIELD(0x09, 1, 1),
+	[F_PUMPX_DN]		= REG_FIELD(0x09, 0, 0),
+	/* REG0A */
+	[F_BOOSTV]		= REG_FIELD(0x0A, 4, 7),
+	[F_BOOSTI]		= REG_FIELD(0x0A, 0, 2), // reserved on BQ25895
+	[F_PFM_OTG_DIS]		= REG_FIELD(0x0A, 3, 3), // BQ25896 only
+	/* REG0B */
+	[F_VBUS_STAT]		= REG_FIELD(0x0B, 5, 7),
+	[F_CHG_STAT]		= REG_FIELD(0x0B, 3, 4),
+	[F_PG_STAT]		= REG_FIELD(0x0B, 2, 2),
+	[F_SDP_STAT]		= REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
+	[F_VSYS_STAT]		= REG_FIELD(0x0B, 0, 0),
+	/* REG0C */
+	[F_WD_FAULT]		= REG_FIELD(0x0C, 7, 7),
+	[F_BOOST_FAULT]		= REG_FIELD(0x0C, 6, 6),
+	[F_CHG_FAULT]		= REG_FIELD(0x0C, 4, 5),
+	[F_BAT_FAULT]		= REG_FIELD(0x0C, 3, 3),
+	[F_NTC_FAULT]		= REG_FIELD(0x0C, 0, 2),
+	/* REG0D */
+	[F_FORCE_VINDPM]	= REG_FIELD(0x0D, 7, 7),
+	[F_VINDPM]		= REG_FIELD(0x0D, 0, 6),
+	/* REG0E */
+	[F_THERM_STAT]		= REG_FIELD(0x0E, 7, 7),
+	[F_BATV]		= REG_FIELD(0x0E, 0, 6),
+	/* REG0F */
+	[F_SYSV]		= REG_FIELD(0x0F, 0, 6),
+	/* REG10 */
+	[F_TSPCT]		= REG_FIELD(0x10, 0, 6),
+	/* REG11 */
+	[F_VBUS_GD]		= REG_FIELD(0x11, 7, 7),
+	[F_VBUSV]		= REG_FIELD(0x11, 0, 6),
+	/* REG12 */
+	[F_ICHGR]		= REG_FIELD(0x12, 0, 6),
+	/* REG13 */
+	[F_VDPM_STAT]		= REG_FIELD(0x13, 7, 7),
+	[F_IDPM_STAT]		= REG_FIELD(0x13, 6, 6),
+	[F_IDPM_LIM]		= REG_FIELD(0x13, 0, 5),
+	/* REG14 */
+	[F_REG_RST]		= REG_FIELD(0x14, 7, 7),
+	[F_ICO_OPTIMIZED]	= REG_FIELD(0x14, 6, 6),
+	[F_PN]			= REG_FIELD(0x14, 3, 5),
+	[F_TS_PROFILE]		= REG_FIELD(0x14, 2, 2),
+	[F_DEV_REV]		= REG_FIELD(0x14, 0, 1)
+};
+
+/*
+ * Most of the val -> idx conversions can be computed, given the minimum,
+ * maximum and the step between values. For the rest of conversions, we use
+ * lookup tables.
+ */
+enum bq25890_table_ids {
+	/* range tables */
+	TBL_ICHG,
+	TBL_ITERM,
+	TBL_IINLIM,
+	TBL_VREG,
+	TBL_BOOSTV,
+	TBL_SYSVMIN,
+	TBL_VBUSV,
+	TBL_VBATCOMP,
+	TBL_RBATCOMP,
+
+	/* lookup tables */
+	TBL_TREG,
+	TBL_BOOSTI,
+	TBL_TSPCT,
+};
+
+/* Thermal Regulation Threshold lookup table, in degrees Celsius */
+static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 };
+
+#define BQ25890_TREG_TBL_SIZE		ARRAY_SIZE(bq25890_treg_tbl)
+
+/* Boost mode current limit lookup table, in uA */
+static const u32 bq25890_boosti_tbl[] = {
+	500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000
+};
+
+#define BQ25890_BOOSTI_TBL_SIZE		ARRAY_SIZE(bq25890_boosti_tbl)
+
+/* NTC 10K temperature lookup table in tenths of a degree */
+static const u32 bq25890_tspct_tbl[] = {
+	850, 840, 830, 820, 810, 800, 790, 780,
+	770, 760, 750, 740, 730, 720, 710, 700,
+	690, 685, 680, 675, 670, 660, 650, 645,
+	640, 630, 620, 615, 610, 600, 590, 585,
+	580, 570, 565, 560, 550, 540, 535, 530,
+	520, 515, 510, 500, 495, 490, 480, 475,
+	470, 460, 455, 450, 440, 435, 430, 425,
+	420, 410, 405, 400, 390, 385, 380, 370,
+	365, 360, 355, 350, 340, 335, 330, 320,
+	310, 305, 300, 290, 285, 280, 275, 270,
+	260, 250, 245, 240, 230, 225, 220, 210,
+	205, 200, 190, 180, 175, 170, 160, 150,
+	145, 140, 130, 120, 115, 110, 100, 90,
+	80, 70, 60, 50, 40, 30, 20, 10,
+	0, -10, -20, -30, -40, -60, -70, -80,
+	-90, -10, -120, -140, -150, -170, -190, -210,
+};
+
+#define BQ25890_TSPCT_TBL_SIZE		ARRAY_SIZE(bq25890_tspct_tbl)
+
+struct bq25890_range {
+	u32 min;
+	u32 max;
+	u32 step;
+};
+
+struct bq25890_lookup {
+	const u32 *tbl;
+	u32 size;
+};
+
+static const union {
+	struct bq25890_range  rt;
+	struct bq25890_lookup lt;
+} bq25890_tables[] = {
+	/* range tables */
+	/* TODO: BQ25896 has max ICHG 3008 mA */
+	[TBL_ICHG] =	 { .rt = {0,        5056000, 64000} },	 /* uA */
+	[TBL_ITERM] =	 { .rt = {64000,    1024000, 64000} },	 /* uA */
+	[TBL_IINLIM] =   { .rt = {100000,   3250000, 50000} },	 /* uA */
+	[TBL_VREG] =	 { .rt = {3840000,  4608000, 16000} },	 /* uV */
+	[TBL_BOOSTV] =	 { .rt = {4550000,  5510000, 64000} },	 /* uV */
+	[TBL_SYSVMIN] =  { .rt = {3000000,  3700000, 100000} },	 /* uV */
+	[TBL_VBUSV] =	 { .rt = {2600000, 15300000, 100000} },	 /* uV */
+	[TBL_VBATCOMP] = { .rt = {0,         224000, 32000} },	 /* uV */
+	[TBL_RBATCOMP] = { .rt = {0,         140000, 20000} },	 /* uOhm */
+
+	/* lookup tables */
+	[TBL_TREG] =	{ .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
+	[TBL_BOOSTI] =	{ .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} },
+	[TBL_TSPCT] =	{ .lt = {bq25890_tspct_tbl, BQ25890_TSPCT_TBL_SIZE} }
+};
+
+static int bq25890_field_read(struct bq25890_device *bq,
+			      enum bq25890_fields field_id)
+{
+	int ret;
+	int val;
+
+	ret = regmap_field_read(bq->rmap_fields[field_id], &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static int bq25890_field_write(struct bq25890_device *bq,
+			       enum bq25890_fields field_id, u8 val)
+{
+	return regmap_field_write(bq->rmap_fields[field_id], val);
+}
+
+static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id)
+{
+	u8 idx;
+
+	if (id >= TBL_TREG) {
+		const u32 *tbl = bq25890_tables[id].lt.tbl;
+		u32 tbl_size = bq25890_tables[id].lt.size;
+
+		for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++)
+			;
+	} else {
+		const struct bq25890_range *rtbl = &bq25890_tables[id].rt;
+		u8 rtbl_size;
+
+		rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1;
+
+		for (idx = 1;
+		     idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value);
+		     idx++)
+			;
+	}
+
+	return idx - 1;
+}
+
+static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id)
+{
+	const struct bq25890_range *rtbl;
+
+	/* lookup table? */
+	if (id >= TBL_TREG)
+		return bq25890_tables[id].lt.tbl[idx];
+
+	/* range table */
+	rtbl = &bq25890_tables[id].rt;
+
+	return (rtbl->min + idx * rtbl->step);
+}
+
+enum bq25890_status {
+	STATUS_NOT_CHARGING,
+	STATUS_PRE_CHARGING,
+	STATUS_FAST_CHARGING,
+	STATUS_TERMINATION_DONE,
+};
+
+enum bq25890_chrg_fault {
+	CHRG_FAULT_NORMAL,
+	CHRG_FAULT_INPUT,
+	CHRG_FAULT_THERMAL_SHUTDOWN,
+	CHRG_FAULT_TIMER_EXPIRED,
+};
+
+enum bq25890_ntc_fault {
+	NTC_FAULT_NORMAL = 0,
+	NTC_FAULT_WARM = 2,
+	NTC_FAULT_COOL = 3,
+	NTC_FAULT_COLD = 5,
+	NTC_FAULT_HOT = 6,
+};
+
+static bool bq25890_is_adc_property(enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_TEMP:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq);
+
+static int bq25890_get_vbus_voltage(struct bq25890_device *bq)
+{
+	int ret;
+
+	ret = bq25890_field_read(bq, F_VBUSV);
+	if (ret < 0)
+		return ret;
+
+	return bq25890_find_val(ret, TBL_VBUSV);
+}
+
+static int bq25890_power_supply_get_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     union power_supply_propval *val)
+{
+	struct bq25890_device *bq = power_supply_get_drvdata(psy);
+	struct bq25890_state state;
+	bool do_adc_conv;
+	int ret;
+
+	mutex_lock(&bq->lock);
+	/* update state in case we lost an interrupt */
+	__bq25890_handle_irq(bq);
+	state = bq->state;
+	do_adc_conv = !state.online && bq25890_is_adc_property(psp);
+	if (do_adc_conv)
+		bq25890_field_write(bq, F_CONV_START, 1);
+	mutex_unlock(&bq->lock);
+
+	if (do_adc_conv)
+		regmap_field_read_poll_timeout(bq->rmap_fields[F_CONV_START],
+			ret, !ret, 25000, 1000000);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!state.online)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (state.chrg_status == STATUS_NOT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (state.chrg_status == STATUS_PRE_CHARGING ||
+			 state.chrg_status == STATUS_FAST_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (state.chrg_status == STATUS_TERMINATION_DONE)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (!state.online || state.chrg_status == STATUS_NOT_CHARGING ||
+		    state.chrg_status == STATUS_TERMINATION_DONE)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		else if (state.chrg_status == STATUS_PRE_CHARGING)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+		else if (state.chrg_status == STATUS_FAST_CHARGING)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else /* unreachable */
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ25890_MANUFACTURER;
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq25890_chip_name[bq->chip_version];
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = state.online;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (!state.chrg_fault && !state.bat_fault && !state.boost_fault)
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		else if (state.bat_fault)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED)
+			val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG);
+
+		/* When temperature is too low, charge current is decreased */
+		if (bq->state.ntc_fault == NTC_FAULT_COOL) {
+			ret = bq25890_field_read(bq, F_JEITA_ISET);
+			if (ret < 0)
+				return ret;
+
+			if (ret)
+				val->intval /= 5;
+			else
+				val->intval /= 2;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		if (!state.online) {
+			val->intval = 0;
+			break;
+		}
+
+		ret = bq25890_field_read(bq, F_BATV); /* read measured value */
+		if (ret < 0)
+			return ret;
+
+		/* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+		val->intval = 2304000 + ret * 20000;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = bq25890_find_val(bq->init_data.vreg, TBL_VREG);
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		val->intval = bq25890_find_val(bq->init_data.iprechg, TBL_ITERM);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq25890_field_read(bq, F_IINLIM);
+		if (ret < 0)
+			return ret;
+
+		val->intval = bq25890_find_val(ret, TBL_IINLIM);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
+		if (ret < 0)
+			return ret;
+
+		/* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+		val->intval = 2304000 + ret * 20000;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
+		if (ret < 0)
+			return ret;
+
+		/* converted_val = ADC_val * 50mA (table 10.3.19) */
+		val->intval = ret * -50000;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = bq25890_field_read(bq, F_TSPCT);
+		if (ret < 0)
+			return ret;
+
+		/* convert TS percentage into rough temperature */
+		val->intval = bq25890_find_val(ret, TBL_TSPCT);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq25890_power_supply_set_property(struct power_supply *psy,
+					     enum power_supply_property psp,
+					     const union power_supply_propval *val)
+{
+	struct bq25890_device *bq = power_supply_get_drvdata(psy);
+	u8 lval;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		lval = bq25890_find_idx(val->intval, TBL_IINLIM);
+		return bq25890_field_write(bq, F_IINLIM, lval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bq25890_power_supply_property_is_writeable(struct power_supply *psy,
+						      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/* On the BQ25892 try to get charger-type info from our supplier */
+static void bq25890_charger_external_power_changed(struct power_supply *psy)
+{
+	struct bq25890_device *bq = power_supply_get_drvdata(psy);
+	union power_supply_propval val;
+	int input_current_limit, ret;
+
+	if (bq->chip_version != BQ25892)
+		return;
+
+	ret = power_supply_get_property_from_supplier(psy,
+						      POWER_SUPPLY_PROP_USB_TYPE,
+						      &val);
+	if (ret)
+		return;
+
+	switch (val.intval) {
+	case POWER_SUPPLY_USB_TYPE_DCP:
+		input_current_limit = bq25890_find_idx(2000000, TBL_IINLIM);
+		if (bq->pump_express_vbus_max) {
+			queue_delayed_work(system_power_efficient_wq,
+					   &bq->pump_express_work,
+					   PUMP_EXPRESS_START_DELAY);
+		}
+		break;
+	case POWER_SUPPLY_USB_TYPE_CDP:
+	case POWER_SUPPLY_USB_TYPE_ACA:
+		input_current_limit = bq25890_find_idx(1500000, TBL_IINLIM);
+		break;
+	case POWER_SUPPLY_USB_TYPE_SDP:
+	default:
+		input_current_limit = bq25890_find_idx(500000, TBL_IINLIM);
+	}
+
+	bq25890_field_write(bq, F_IINLIM, input_current_limit);
+	power_supply_changed(psy);
+}
+
+static int bq25890_get_chip_state(struct bq25890_device *bq,
+				  struct bq25890_state *state)
+{
+	int i, ret;
+
+	struct {
+		enum bq25890_fields id;
+		u8 *data;
+	} state_fields[] = {
+		{F_CHG_STAT,	&state->chrg_status},
+		{F_PG_STAT,	&state->online},
+		{F_VSYS_STAT,	&state->vsys_status},
+		{F_BOOST_FAULT, &state->boost_fault},
+		{F_BAT_FAULT,	&state->bat_fault},
+		{F_CHG_FAULT,	&state->chrg_fault},
+		{F_NTC_FAULT,	&state->ntc_fault}
+	};
+
+	for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
+		ret = bq25890_field_read(bq, state_fields[i].id);
+		if (ret < 0)
+			return ret;
+
+		*state_fields[i].data = ret;
+	}
+
+	dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT/NTC=%d/%d/%d/%d\n",
+		state->chrg_status, state->online, state->vsys_status,
+		state->chrg_fault, state->boost_fault, state->bat_fault,
+		state->ntc_fault);
+
+	return 0;
+}
+
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
+{
+	struct bq25890_state new_state;
+	int ret;
+
+	ret = bq25890_get_chip_state(bq, &new_state);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	if (!memcmp(&bq->state, &new_state, sizeof(new_state)))
+		return IRQ_NONE;
+
+	if (!new_state.online && bq->state.online) {	    /* power removed */
+		/* disable ADC */
+		ret = bq25890_field_write(bq, F_CONV_RATE, 0);
+		if (ret < 0)
+			goto error;
+	} else if (new_state.online && !bq->state.online) { /* power inserted */
+		/* enable ADC, to have control of charge current/voltage */
+		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
+		if (ret < 0)
+			goto error;
+	}
+
+	bq->state = new_state;
+	power_supply_changed(bq->charger);
+
+	return IRQ_HANDLED;
+error:
+	dev_err(bq->dev, "Error communicating with the chip: %pe\n",
+		ERR_PTR(ret));
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
+{
+	struct bq25890_device *bq = private;
+	irqreturn_t ret;
+
+	mutex_lock(&bq->lock);
+	ret = __bq25890_handle_irq(bq);
+	mutex_unlock(&bq->lock);
+
+	return ret;
+}
+
+static int bq25890_chip_reset(struct bq25890_device *bq)
+{
+	int ret;
+	int rst_check_counter = 10;
+
+	ret = bq25890_field_write(bq, F_REG_RST, 1);
+	if (ret < 0)
+		return ret;
+
+	do {
+		ret = bq25890_field_read(bq, F_REG_RST);
+		if (ret < 0)
+			return ret;
+
+		usleep_range(5, 10);
+	} while (ret == 1 && --rst_check_counter);
+
+	if (!rst_check_counter)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int bq25890_rw_init_data(struct bq25890_device *bq)
+{
+	bool write = !bq->read_back_init_data;
+	int ret;
+	int i;
+
+	const struct {
+		enum bq25890_fields id;
+		u8 *value;
+	} init_data[] = {
+		{F_ICHG,	 &bq->init_data.ichg},
+		{F_VREG,	 &bq->init_data.vreg},
+		{F_ITERM,	 &bq->init_data.iterm},
+		{F_IPRECHG,	 &bq->init_data.iprechg},
+		{F_SYSVMIN,	 &bq->init_data.sysvmin},
+		{F_BOOSTV,	 &bq->init_data.boostv},
+		{F_BOOSTI,	 &bq->init_data.boosti},
+		{F_BOOSTF,	 &bq->init_data.boostf},
+		{F_EN_ILIM,	 &bq->init_data.ilim_en},
+		{F_TREG,	 &bq->init_data.treg},
+		{F_BATCMP,	 &bq->init_data.rbatcomp},
+		{F_VCLAMP,	 &bq->init_data.vclamp},
+	};
+
+	for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+		if (write) {
+			ret = bq25890_field_write(bq, init_data[i].id,
+						  *init_data[i].value);
+		} else {
+			ret = bq25890_field_read(bq, init_data[i].id);
+			if (ret >= 0)
+				*init_data[i].value = ret;
+		}
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Accessing init data failed %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int bq25890_hw_init(struct bq25890_device *bq)
+{
+	int ret;
+
+	if (!bq->skip_reset) {
+		ret = bq25890_chip_reset(bq);
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Reset failed %d\n", ret);
+			return ret;
+		}
+	} else {
+		/*
+		 * Ensure charging is enabled, on some boards where the fw
+		 * takes care of initalizition F_CHG_CFG is set to 0 before
+		 * handing control over to the OS.
+		 */
+		ret = bq25890_field_write(bq, F_CHG_CFG, 1);
+		if (ret < 0) {
+			dev_dbg(bq->dev, "Enabling charging failed %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* disable watchdog */
+	ret = bq25890_field_write(bq, F_WD, 0);
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret);
+		return ret;
+	}
+
+	/* initialize currents/voltages and other parameters */
+	ret = bq25890_rw_init_data(bq);
+	if (ret)
+		return ret;
+
+	ret = bq25890_get_chip_state(bq, &bq->state);
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Get state failed %d\n", ret);
+		return ret;
+	}
+
+	/* Configure ADC for continuous conversions when charging */
+	ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online);
+	if (ret < 0) {
+		dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const enum power_supply_property bq25890_power_supply_props[] = {
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static char *bq25890_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static const struct power_supply_desc bq25890_power_supply_desc = {
+	.name = "bq25890-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = bq25890_power_supply_props,
+	.num_properties = ARRAY_SIZE(bq25890_power_supply_props),
+	.get_property = bq25890_power_supply_get_property,
+	.set_property = bq25890_power_supply_set_property,
+	.property_is_writeable = bq25890_power_supply_property_is_writeable,
+	.external_power_changed	= bq25890_charger_external_power_changed,
+};
+
+static int bq25890_power_supply_init(struct bq25890_device *bq)
+{
+	struct power_supply_config psy_cfg = { .drv_data = bq, };
+
+	psy_cfg.supplied_to = bq25890_charger_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to);
+
+	bq->charger = devm_power_supply_register(bq->dev,
+						 &bq25890_power_supply_desc,
+						 &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(bq->charger);
+}
+
+static int bq25890_set_otg_cfg(struct bq25890_device *bq, u8 val)
+{
+	int ret;
+
+	ret = bq25890_field_write(bq, F_OTG_CFG, val);
+	if (ret < 0)
+		dev_err(bq->dev, "Error switching to boost/charger mode: %d\n", ret);
+
+	return ret;
+}
+
+static void bq25890_pump_express_work(struct work_struct *data)
+{
+	struct bq25890_device *bq =
+		container_of(data, struct bq25890_device, pump_express_work.work);
+	int voltage, i, ret;
+
+	dev_dbg(bq->dev, "Start to request input voltage increasing\n");
+
+	/* Enable current pulse voltage control protocol */
+	ret = bq25890_field_write(bq, F_PUMPX_EN, 1);
+	if (ret < 0)
+		goto error_print;
+
+	for (i = 0; i < PUMP_EXPRESS_MAX_TRIES; i++) {
+		voltage = bq25890_get_vbus_voltage(bq);
+		if (voltage < 0)
+			goto error_print;
+		dev_dbg(bq->dev, "input voltage = %d uV\n", voltage);
+
+		if ((voltage + PUMP_EXPRESS_VBUS_MARGIN_uV) >
+					bq->pump_express_vbus_max)
+			break;
+
+		ret = bq25890_field_write(bq, F_PUMPX_UP, 1);
+		if (ret < 0)
+			goto error_print;
+
+		/* Note a single PUMPX up pulse-sequence takes 2.1s */
+		ret = regmap_field_read_poll_timeout(bq->rmap_fields[F_PUMPX_UP],
+						     ret, !ret, 100000, 3000000);
+		if (ret < 0)
+			goto error_print;
+
+		/* Make sure ADC has sampled Vbus before checking again */
+		msleep(1000);
+	}
+
+	bq25890_field_write(bq, F_PUMPX_EN, 0);
+
+	dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n",
+		 voltage);
+
+	power_supply_changed(bq->charger);
+
+	return;
+error_print:
+	bq25890_field_write(bq, F_PUMPX_EN, 0);
+	dev_err(bq->dev, "Failed to request hi-voltage charging\n");
+}
+
+static void bq25890_usb_work(struct work_struct *data)
+{
+	int ret;
+	struct bq25890_device *bq =
+			container_of(data, struct bq25890_device, usb_work);
+
+	switch (bq->usb_event) {
+	case USB_EVENT_ID:
+		/* Enable boost mode */
+		bq25890_set_otg_cfg(bq, 1);
+		break;
+
+	case USB_EVENT_NONE:
+		/* Disable boost mode */
+		ret = bq25890_set_otg_cfg(bq, 0);
+		if (ret == 0)
+			power_supply_changed(bq->charger);
+		break;
+	}
+}
+
+static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
+				void *priv)
+{
+	struct bq25890_device *bq =
+			container_of(nb, struct bq25890_device, usb_nb);
+
+	bq->usb_event = val;
+	queue_work(system_power_efficient_wq, &bq->usb_work);
+
+	return NOTIFY_OK;
+}
+
+#ifdef CONFIG_REGULATOR
+static int bq25890_vbus_enable(struct regulator_dev *rdev)
+{
+	struct bq25890_device *bq = rdev_get_drvdata(rdev);
+
+	return bq25890_set_otg_cfg(bq, 1);
+}
+
+static int bq25890_vbus_disable(struct regulator_dev *rdev)
+{
+	struct bq25890_device *bq = rdev_get_drvdata(rdev);
+
+	return bq25890_set_otg_cfg(bq, 0);
+}
+
+static int bq25890_vbus_is_enabled(struct regulator_dev *rdev)
+{
+	struct bq25890_device *bq = rdev_get_drvdata(rdev);
+
+	return bq25890_field_read(bq, F_OTG_CFG);
+}
+
+static const struct regulator_ops bq25890_vbus_ops = {
+	.enable = bq25890_vbus_enable,
+	.disable = bq25890_vbus_disable,
+	.is_enabled = bq25890_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq25890_vbus_desc = {
+	.name = "usb_otg_vbus",
+	.of_match = "usb-otg-vbus",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq25890_vbus_ops,
+	.fixed_uV = 5000000,
+	.n_voltages = 1,
+};
+
+static int bq25890_register_regulator(struct bq25890_device *bq)
+{
+	struct bq25890_platform_data *pdata = dev_get_platdata(bq->dev);
+	struct regulator_config cfg = {
+		.dev = bq->dev,
+		.driver_data = bq,
+	};
+	struct regulator_dev *reg;
+
+	if (!IS_ERR_OR_NULL(bq->usb_phy))
+		return 0;
+
+	if (pdata)
+		cfg.init_data = pdata->regulator_init_data;
+
+	reg = devm_regulator_register(bq->dev, &bq25890_vbus_desc, &cfg);
+	if (IS_ERR(reg)) {
+		return dev_err_probe(bq->dev, PTR_ERR(reg),
+				     "registering vbus regulator");
+	}
+
+	return 0;
+}
+#else
+static inline int
+bq25890_register_regulator(struct bq25890_device *bq)
+{
+	return 0;
+}
+#endif
+
+static int bq25890_get_chip_version(struct bq25890_device *bq)
+{
+	int id, rev;
+
+	id = bq25890_field_read(bq, F_PN);
+	if (id < 0) {
+		dev_err(bq->dev, "Cannot read chip ID: %d\n", id);
+		return id;
+	}
+
+	rev = bq25890_field_read(bq, F_DEV_REV);
+	if (rev < 0) {
+		dev_err(bq->dev, "Cannot read chip revision: %d\n", rev);
+		return rev;
+	}
+
+	switch (id) {
+	case BQ25890_ID:
+		bq->chip_version = BQ25890;
+		break;
+
+	/* BQ25892 and BQ25896 share same ID 0 */
+	case BQ25896_ID:
+		switch (rev) {
+		case 2:
+			bq->chip_version = BQ25896;
+			break;
+		case 1:
+			bq->chip_version = BQ25892;
+			break;
+		default:
+			dev_err(bq->dev,
+				"Unknown device revision %d, assume BQ25892\n",
+				rev);
+			bq->chip_version = BQ25892;
+		}
+		break;
+
+	case BQ25895_ID:
+		bq->chip_version = BQ25895;
+		break;
+
+	default:
+		dev_err(bq->dev, "Unknown chip ID %d\n", id);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int bq25890_irq_probe(struct bq25890_device *bq)
+{
+	struct gpio_desc *irq;
+
+	irq = devm_gpiod_get(bq->dev, BQ25890_IRQ_PIN, GPIOD_IN);
+	if (IS_ERR(irq))
+		return dev_err_probe(bq->dev, PTR_ERR(irq),
+				     "Could not probe irq pin.\n");
+
+	return gpiod_to_irq(irq);
+}
+
+static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
+{
+	int ret;
+	u32 property;
+	int i;
+	struct bq25890_init_data *init = &bq->init_data;
+	struct {
+		char *name;
+		bool optional;
+		enum bq25890_table_ids tbl_id;
+		u8 *conv_data; /* holds converted value from given property */
+	} props[] = {
+		/* required properties */
+		{"ti,charge-current", false, TBL_ICHG, &init->ichg},
+		{"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg},
+		{"ti,termination-current", false, TBL_ITERM, &init->iterm},
+		{"ti,precharge-current", false, TBL_ITERM, &init->iprechg},
+		{"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin},
+		{"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv},
+		{"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
+
+		/* optional properties */
+		{"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg},
+		{"ti,ibatcomp-micro-ohms", true, TBL_RBATCOMP, &init->rbatcomp},
+		{"ti,ibatcomp-clamp-microvolt", true, TBL_VBATCOMP, &init->vclamp},
+	};
+
+	/* initialize data for optional properties */
+	init->treg = 3; /* 120 degrees Celsius */
+	init->rbatcomp = init->vclamp = 0; /* IBAT compensation disabled */
+
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		ret = device_property_read_u32(bq->dev, props[i].name,
+					       &property);
+		if (ret < 0) {
+			if (props[i].optional)
+				continue;
+
+			dev_err(bq->dev, "Unable to read property %d %s\n", ret,
+				props[i].name);
+
+			return ret;
+		}
+
+		*props[i].conv_data = bq25890_find_idx(property,
+						       props[i].tbl_id);
+	}
+
+	return 0;
+}
+
+static int bq25890_fw_probe(struct bq25890_device *bq)
+{
+	int ret;
+	struct bq25890_init_data *init = &bq->init_data;
+
+	/* Optional, left at 0 if property is not present */
+	device_property_read_u32(bq->dev, "linux,pump-express-vbus-max",
+				 &bq->pump_express_vbus_max);
+
+	bq->skip_reset = device_property_read_bool(bq->dev, "linux,skip-reset");
+	bq->read_back_init_data = device_property_read_bool(bq->dev,
+						"linux,read-back-settings");
+	if (bq->read_back_init_data)
+		return 0;
+
+	ret = bq25890_fw_read_u32_props(bq);
+	if (ret < 0)
+		return ret;
+
+	init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin");
+	init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq");
+
+	return 0;
+}
+
+static void bq25890_non_devm_cleanup(void *data)
+{
+	struct bq25890_device *bq = data;
+
+	cancel_delayed_work_sync(&bq->pump_express_work);
+}
+
+static int bq25890_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct bq25890_device *bq;
+	int ret;
+
+	bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq)
+		return -ENOMEM;
+
+	bq->client = client;
+	bq->dev = dev;
+
+	mutex_init(&bq->lock);
+	INIT_DELAYED_WORK(&bq->pump_express_work, bq25890_pump_express_work);
+
+	bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config);
+	if (IS_ERR(bq->rmap))
+		return dev_err_probe(dev, PTR_ERR(bq->rmap),
+				     "failed to allocate register map\n");
+
+	ret = devm_regmap_field_bulk_alloc(dev, bq->rmap, bq->rmap_fields,
+					   bq25890_reg_fields, F_MAX_FIELDS);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, bq);
+
+	ret = bq25890_get_chip_version(bq);
+	if (ret) {
+		dev_err(dev, "Cannot read chip ID or unknown chip: %d\n", ret);
+		return ret;
+	}
+
+	ret = bq25890_fw_probe(bq);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "reading device properties\n");
+
+	ret = bq25890_hw_init(bq);
+	if (ret < 0) {
+		dev_err(dev, "Cannot initialize the chip: %d\n", ret);
+		return ret;
+	}
+
+	if (client->irq <= 0)
+		client->irq = bq25890_irq_probe(bq);
+
+	if (client->irq < 0) {
+		dev_err(dev, "No irq resource found.\n");
+		return client->irq;
+	}
+
+	/* OTG reporting */
+	bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+
+	/*
+	 * This must be before bq25890_power_supply_init(), so that it runs
+	 * after devm unregisters the power_supply.
+	 */
+	ret = devm_add_action_or_reset(dev, bq25890_non_devm_cleanup, bq);
+	if (ret)
+		return ret;
+
+	ret = bq25890_register_regulator(bq);
+	if (ret)
+		return ret;
+
+	if (!IS_ERR_OR_NULL(bq->usb_phy)) {
+		INIT_WORK(&bq->usb_work, bq25890_usb_work);
+		bq->usb_nb.notifier_call = bq25890_usb_notifier;
+		usb_register_notifier(bq->usb_phy, &bq->usb_nb);
+	}
+
+	ret = bq25890_power_supply_init(bq);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register power supply\n");
+		goto err_unregister_usb_notifier;
+	}
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					bq25890_irq_handler_thread,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					BQ25890_IRQ_PIN, bq);
+	if (ret)
+		goto err_unregister_usb_notifier;
+
+	return 0;
+
+err_unregister_usb_notifier:
+	if (!IS_ERR_OR_NULL(bq->usb_phy))
+		usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
+
+	return ret;
+}
+
+static void bq25890_remove(struct i2c_client *client)
+{
+	struct bq25890_device *bq = i2c_get_clientdata(client);
+
+	if (!IS_ERR_OR_NULL(bq->usb_phy))
+		usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
+
+	if (!bq->skip_reset) {
+		/* reset all registers to default values */
+		bq25890_chip_reset(bq);
+	}
+}
+
+static void bq25890_shutdown(struct i2c_client *client)
+{
+	struct bq25890_device *bq = i2c_get_clientdata(client);
+
+	/*
+	 * TODO this if + return should probably be removed, but that would
+	 * introduce a function change for boards using the usb-phy framework.
+	 * This needs to be tested on such a board before making this change.
+	 */
+	if (!IS_ERR_OR_NULL(bq->usb_phy))
+		return;
+
+	/*
+	 * Turn off the 5v Boost regulator which outputs Vbus to the device's
+	 * Micro-USB or Type-C USB port. Leaving this on drains power and
+	 * this avoids the PMIC on some device-models seeing this as Vbus
+	 * getting inserted after shutdown, causing the device to immediately
+	 * power-up again.
+	 */
+	bq25890_set_otg_cfg(bq, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq25890_suspend(struct device *dev)
+{
+	struct bq25890_device *bq = dev_get_drvdata(dev);
+
+	/*
+	 * If charger is removed, while in suspend, make sure ADC is diabled
+	 * since it consumes slightly more power.
+	 */
+	return bq25890_field_write(bq, F_CONV_RATE, 0);
+}
+
+static int bq25890_resume(struct device *dev)
+{
+	int ret;
+	struct bq25890_device *bq = dev_get_drvdata(dev);
+
+	mutex_lock(&bq->lock);
+
+	ret = bq25890_get_chip_state(bq, &bq->state);
+	if (ret < 0)
+		goto unlock;
+
+	/* Re-enable ADC only if charger is plugged in. */
+	if (bq->state.online) {
+		ret = bq25890_field_write(bq, F_CONV_RATE, 1);
+		if (ret < 0)
+			goto unlock;
+	}
+
+	/* signal userspace, maybe state changed while suspended */
+	power_supply_changed(bq->charger);
+
+unlock:
+	mutex_unlock(&bq->lock);
+
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops bq25890_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume)
+};
+
+static const struct i2c_device_id bq25890_i2c_ids[] = {
+	{ "bq25890", 0 },
+	{ "bq25892", 0 },
+	{ "bq25895", 0 },
+	{ "bq25896", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
+
+static const struct of_device_id bq25890_of_match[] = {
+	{ .compatible = "ti,bq25890", },
+	{ .compatible = "ti,bq25892", },
+	{ .compatible = "ti,bq25895", },
+	{ .compatible = "ti,bq25896", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq25890_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq25890_acpi_match[] = {
+	{"BQ258900", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
+#endif
+
+static struct i2c_driver bq25890_driver = {
+	.driver = {
+		.name = "bq25890-charger",
+		.of_match_table = of_match_ptr(bq25890_of_match),
+		.acpi_match_table = ACPI_PTR(bq25890_acpi_match),
+		.pm = &bq25890_pm,
+	},
+	.probe_new = bq25890_probe,
+	.remove = bq25890_remove,
+	.shutdown = bq25890_shutdown,
+	.id_table = bq25890_i2c_ids,
+};
+module_i2c_driver(bq25890_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("bq25890 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq25980_charger.c b/drivers/power/supply/bq25980_charger.c
new file mode 100644
index 000000000..9339f5649
--- /dev/null
+++ b/drivers/power/supply/bq25980_charger.c
@@ -0,0 +1,1298 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ25980 Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+
+#include "bq25980_charger.h"
+
+struct bq25980_state {
+	bool dischg;
+	bool ovp;
+	bool ocp;
+	bool wdt;
+	bool tflt;
+	bool online;
+	bool ce;
+	bool hiz;
+	bool bypass;
+
+	u32 vbat_adc;
+	u32 vsys_adc;
+	u32 ibat_adc;
+};
+
+enum bq25980_id {
+	BQ25980,
+	BQ25975,
+	BQ25960,
+};
+
+struct bq25980_chip_info {
+
+	int model_id;
+
+	const struct regmap_config *regmap_config;
+
+	int busocp_def;
+	int busocp_sc_max;
+	int busocp_byp_max;
+	int busocp_sc_min;
+	int busocp_byp_min;
+
+	int busovp_sc_def;
+	int busovp_byp_def;
+	int busovp_sc_step;
+
+	int busovp_sc_offset;
+	int busovp_byp_step;
+	int busovp_byp_offset;
+	int busovp_sc_min;
+	int busovp_sc_max;
+	int busovp_byp_min;
+	int busovp_byp_max;
+
+	int batovp_def;
+	int batovp_max;
+	int batovp_min;
+	int batovp_step;
+	int batovp_offset;
+
+	int batocp_def;
+	int batocp_max;
+};
+
+struct bq25980_init_data {
+	u32 ichg;
+	u32 bypass_ilim;
+	u32 sc_ilim;
+	u32 vreg;
+	u32 iterm;
+	u32 iprechg;
+	u32 bypass_vlim;
+	u32 sc_vlim;
+	u32 ichg_max;
+	u32 vreg_max;
+};
+
+struct bq25980_device {
+	struct i2c_client *client;
+	struct device *dev;
+	struct power_supply *charger;
+	struct power_supply *battery;
+	struct mutex lock;
+	struct regmap *regmap;
+
+	char model_name[I2C_NAME_SIZE];
+
+	struct bq25980_init_data init_data;
+	const struct bq25980_chip_info *chip_info;
+	struct bq25980_state state;
+	int watchdog_timer;
+};
+
+static struct reg_default bq25980_reg_defs[] = {
+	{BQ25980_BATOVP, 0x5A},
+	{BQ25980_BATOVP_ALM, 0x46},
+	{BQ25980_BATOCP, 0x51},
+	{BQ25980_BATOCP_ALM, 0x50},
+	{BQ25980_BATUCP_ALM, 0x28},
+	{BQ25980_CHRGR_CTRL_1, 0x0},
+	{BQ25980_BUSOVP, 0x26},
+	{BQ25980_BUSOVP_ALM, 0x22},
+	{BQ25980_BUSOCP, 0xD},
+	{BQ25980_BUSOCP_ALM, 0xC},
+	{BQ25980_TEMP_CONTROL, 0x30},
+	{BQ25980_TDIE_ALM, 0xC8},
+	{BQ25980_TSBUS_FLT, 0x15},
+	{BQ25980_TSBAT_FLG, 0x15},
+	{BQ25980_VAC_CONTROL, 0x0},
+	{BQ25980_CHRGR_CTRL_2, 0x0},
+	{BQ25980_CHRGR_CTRL_3, 0x20},
+	{BQ25980_CHRGR_CTRL_4, 0x1D},
+	{BQ25980_CHRGR_CTRL_5, 0x18},
+	{BQ25980_STAT1, 0x0},
+	{BQ25980_STAT2, 0x0},
+	{BQ25980_STAT3, 0x0},
+	{BQ25980_STAT4, 0x0},
+	{BQ25980_STAT5, 0x0},
+	{BQ25980_FLAG1, 0x0},
+	{BQ25980_FLAG2, 0x0},
+	{BQ25980_FLAG3, 0x0},
+	{BQ25980_FLAG4, 0x0},
+	{BQ25980_FLAG5, 0x0},
+	{BQ25980_MASK1, 0x0},
+	{BQ25980_MASK2, 0x0},
+	{BQ25980_MASK3, 0x0},
+	{BQ25980_MASK4, 0x0},
+	{BQ25980_MASK5, 0x0},
+	{BQ25980_DEVICE_INFO, 0x8},
+	{BQ25980_ADC_CONTROL1, 0x0},
+	{BQ25980_ADC_CONTROL2, 0x0},
+	{BQ25980_IBUS_ADC_LSB, 0x0},
+	{BQ25980_IBUS_ADC_MSB, 0x0},
+	{BQ25980_VBUS_ADC_LSB, 0x0},
+	{BQ25980_VBUS_ADC_MSB, 0x0},
+	{BQ25980_VAC1_ADC_LSB, 0x0},
+	{BQ25980_VAC2_ADC_LSB, 0x0},
+	{BQ25980_VOUT_ADC_LSB, 0x0},
+	{BQ25980_VBAT_ADC_LSB, 0x0},
+	{BQ25980_IBAT_ADC_MSB, 0x0},
+	{BQ25980_IBAT_ADC_LSB, 0x0},
+	{BQ25980_TSBUS_ADC_LSB, 0x0},
+	{BQ25980_TSBAT_ADC_LSB, 0x0},
+	{BQ25980_TDIE_ADC_LSB, 0x0},
+	{BQ25980_DEGLITCH_TIME, 0x0},
+	{BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static struct reg_default bq25975_reg_defs[] = {
+	{BQ25980_BATOVP, 0x5A},
+	{BQ25980_BATOVP_ALM, 0x46},
+	{BQ25980_BATOCP, 0x51},
+	{BQ25980_BATOCP_ALM, 0x50},
+	{BQ25980_BATUCP_ALM, 0x28},
+	{BQ25980_CHRGR_CTRL_1, 0x0},
+	{BQ25980_BUSOVP, 0x26},
+	{BQ25980_BUSOVP_ALM, 0x22},
+	{BQ25980_BUSOCP, 0xD},
+	{BQ25980_BUSOCP_ALM, 0xC},
+	{BQ25980_TEMP_CONTROL, 0x30},
+	{BQ25980_TDIE_ALM, 0xC8},
+	{BQ25980_TSBUS_FLT, 0x15},
+	{BQ25980_TSBAT_FLG, 0x15},
+	{BQ25980_VAC_CONTROL, 0x0},
+	{BQ25980_CHRGR_CTRL_2, 0x0},
+	{BQ25980_CHRGR_CTRL_3, 0x20},
+	{BQ25980_CHRGR_CTRL_4, 0x1D},
+	{BQ25980_CHRGR_CTRL_5, 0x18},
+	{BQ25980_STAT1, 0x0},
+	{BQ25980_STAT2, 0x0},
+	{BQ25980_STAT3, 0x0},
+	{BQ25980_STAT4, 0x0},
+	{BQ25980_STAT5, 0x0},
+	{BQ25980_FLAG1, 0x0},
+	{BQ25980_FLAG2, 0x0},
+	{BQ25980_FLAG3, 0x0},
+	{BQ25980_FLAG4, 0x0},
+	{BQ25980_FLAG5, 0x0},
+	{BQ25980_MASK1, 0x0},
+	{BQ25980_MASK2, 0x0},
+	{BQ25980_MASK3, 0x0},
+	{BQ25980_MASK4, 0x0},
+	{BQ25980_MASK5, 0x0},
+	{BQ25980_DEVICE_INFO, 0x8},
+	{BQ25980_ADC_CONTROL1, 0x0},
+	{BQ25980_ADC_CONTROL2, 0x0},
+	{BQ25980_IBUS_ADC_LSB, 0x0},
+	{BQ25980_IBUS_ADC_MSB, 0x0},
+	{BQ25980_VBUS_ADC_LSB, 0x0},
+	{BQ25980_VBUS_ADC_MSB, 0x0},
+	{BQ25980_VAC1_ADC_LSB, 0x0},
+	{BQ25980_VAC2_ADC_LSB, 0x0},
+	{BQ25980_VOUT_ADC_LSB, 0x0},
+	{BQ25980_VBAT_ADC_LSB, 0x0},
+	{BQ25980_IBAT_ADC_MSB, 0x0},
+	{BQ25980_IBAT_ADC_LSB, 0x0},
+	{BQ25980_TSBUS_ADC_LSB, 0x0},
+	{BQ25980_TSBAT_ADC_LSB, 0x0},
+	{BQ25980_TDIE_ADC_LSB, 0x0},
+	{BQ25980_DEGLITCH_TIME, 0x0},
+	{BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static struct reg_default bq25960_reg_defs[] = {
+	{BQ25980_BATOVP, 0x5A},
+	{BQ25980_BATOVP_ALM, 0x46},
+	{BQ25980_BATOCP, 0x51},
+	{BQ25980_BATOCP_ALM, 0x50},
+	{BQ25980_BATUCP_ALM, 0x28},
+	{BQ25980_CHRGR_CTRL_1, 0x0},
+	{BQ25980_BUSOVP, 0x26},
+	{BQ25980_BUSOVP_ALM, 0x22},
+	{BQ25980_BUSOCP, 0xD},
+	{BQ25980_BUSOCP_ALM, 0xC},
+	{BQ25980_TEMP_CONTROL, 0x30},
+	{BQ25980_TDIE_ALM, 0xC8},
+	{BQ25980_TSBUS_FLT, 0x15},
+	{BQ25980_TSBAT_FLG, 0x15},
+	{BQ25980_VAC_CONTROL, 0x0},
+	{BQ25980_CHRGR_CTRL_2, 0x0},
+	{BQ25980_CHRGR_CTRL_3, 0x20},
+	{BQ25980_CHRGR_CTRL_4, 0x1D},
+	{BQ25980_CHRGR_CTRL_5, 0x18},
+	{BQ25980_STAT1, 0x0},
+	{BQ25980_STAT2, 0x0},
+	{BQ25980_STAT3, 0x0},
+	{BQ25980_STAT4, 0x0},
+	{BQ25980_STAT5, 0x0},
+	{BQ25980_FLAG1, 0x0},
+	{BQ25980_FLAG2, 0x0},
+	{BQ25980_FLAG3, 0x0},
+	{BQ25980_FLAG4, 0x0},
+	{BQ25980_FLAG5, 0x0},
+	{BQ25980_MASK1, 0x0},
+	{BQ25980_MASK2, 0x0},
+	{BQ25980_MASK3, 0x0},
+	{BQ25980_MASK4, 0x0},
+	{BQ25980_MASK5, 0x0},
+	{BQ25980_DEVICE_INFO, 0x8},
+	{BQ25980_ADC_CONTROL1, 0x0},
+	{BQ25980_ADC_CONTROL2, 0x0},
+	{BQ25980_IBUS_ADC_LSB, 0x0},
+	{BQ25980_IBUS_ADC_MSB, 0x0},
+	{BQ25980_VBUS_ADC_LSB, 0x0},
+	{BQ25980_VBUS_ADC_MSB, 0x0},
+	{BQ25980_VAC1_ADC_LSB, 0x0},
+	{BQ25980_VAC2_ADC_LSB, 0x0},
+	{BQ25980_VOUT_ADC_LSB, 0x0},
+	{BQ25980_VBAT_ADC_LSB, 0x0},
+	{BQ25980_IBAT_ADC_MSB, 0x0},
+	{BQ25980_IBAT_ADC_LSB, 0x0},
+	{BQ25980_TSBUS_ADC_LSB, 0x0},
+	{BQ25980_TSBAT_ADC_LSB, 0x0},
+	{BQ25980_TDIE_ADC_LSB, 0x0},
+	{BQ25980_DEGLITCH_TIME, 0x0},
+	{BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static int bq25980_watchdog_time[BQ25980_NUM_WD_VAL] = {5000, 10000, 50000,
+							300000};
+
+static int bq25980_get_input_curr_lim(struct bq25980_device *bq)
+{
+	unsigned int busocp_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_BUSOCP, &busocp_reg_code);
+	if (ret)
+		return ret;
+
+	return (busocp_reg_code * BQ25980_BUSOCP_STEP_uA) + BQ25980_BUSOCP_OFFSET_uA;
+}
+
+static int bq25980_set_hiz(struct bq25980_device *bq, int setting)
+{
+	return regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+			BQ25980_EN_HIZ, setting);
+}
+
+static int bq25980_set_input_curr_lim(struct bq25980_device *bq, int busocp)
+{
+	unsigned int busocp_reg_code;
+	int ret;
+
+	if (!busocp)
+		return bq25980_set_hiz(bq, BQ25980_ENABLE_HIZ);
+
+	bq25980_set_hiz(bq, BQ25980_DISABLE_HIZ);
+
+	if (busocp < BQ25980_BUSOCP_MIN_uA)
+		busocp = BQ25980_BUSOCP_MIN_uA;
+
+	if (bq->state.bypass)
+		busocp = min(busocp, bq->chip_info->busocp_sc_max);
+	else
+		busocp = min(busocp, bq->chip_info->busocp_byp_max);
+
+	busocp_reg_code = (busocp - BQ25980_BUSOCP_OFFSET_uA)
+						/ BQ25980_BUSOCP_STEP_uA;
+
+	ret = regmap_write(bq->regmap, BQ25980_BUSOCP, busocp_reg_code);
+	if (ret)
+		return ret;
+
+	return regmap_write(bq->regmap, BQ25980_BUSOCP_ALM, busocp_reg_code);
+}
+
+static int bq25980_get_input_volt_lim(struct bq25980_device *bq)
+{
+	unsigned int busovp_reg_code;
+	unsigned int busovp_offset;
+	unsigned int busovp_step;
+	int ret;
+
+	if (bq->state.bypass) {
+		busovp_step = bq->chip_info->busovp_byp_step;
+		busovp_offset = bq->chip_info->busovp_byp_offset;
+	} else {
+		busovp_step = bq->chip_info->busovp_sc_step;
+		busovp_offset = bq->chip_info->busovp_sc_offset;
+	}
+
+	ret = regmap_read(bq->regmap, BQ25980_BUSOVP, &busovp_reg_code);
+	if (ret)
+		return ret;
+
+	return (busovp_reg_code * busovp_step) + busovp_offset;
+}
+
+static int bq25980_set_input_volt_lim(struct bq25980_device *bq, int busovp)
+{
+	unsigned int busovp_reg_code;
+	unsigned int busovp_step;
+	unsigned int busovp_offset;
+	int ret;
+
+	if (bq->state.bypass) {
+		busovp_step = bq->chip_info->busovp_byp_step;
+		busovp_offset = bq->chip_info->busovp_byp_offset;
+		if (busovp > bq->chip_info->busovp_byp_max)
+			busovp = bq->chip_info->busovp_byp_max;
+		else if (busovp < bq->chip_info->busovp_byp_min)
+			busovp = bq->chip_info->busovp_byp_min;
+	} else {
+		busovp_step = bq->chip_info->busovp_sc_step;
+		busovp_offset = bq->chip_info->busovp_sc_offset;
+		if (busovp > bq->chip_info->busovp_sc_max)
+			busovp = bq->chip_info->busovp_sc_max;
+		else if (busovp < bq->chip_info->busovp_sc_min)
+			busovp = bq->chip_info->busovp_sc_min;
+	}
+
+	busovp_reg_code = (busovp - busovp_offset) / busovp_step;
+
+	ret = regmap_write(bq->regmap, BQ25980_BUSOVP, busovp_reg_code);
+	if (ret)
+		return ret;
+
+	return regmap_write(bq->regmap, BQ25980_BUSOVP_ALM, busovp_reg_code);
+}
+
+static int bq25980_get_const_charge_curr(struct bq25980_device *bq)
+{
+	unsigned int batocp_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_BATOCP, &batocp_reg_code);
+	if (ret)
+		return ret;
+
+	return (batocp_reg_code & BQ25980_BATOCP_MASK) *
+						BQ25980_BATOCP_STEP_uA;
+}
+
+static int bq25980_set_const_charge_curr(struct bq25980_device *bq, int batocp)
+{
+	unsigned int batocp_reg_code;
+	int ret;
+
+	batocp = max(batocp, BQ25980_BATOCP_MIN_uA);
+	batocp = min(batocp, bq->chip_info->batocp_max);
+
+	batocp_reg_code = batocp / BQ25980_BATOCP_STEP_uA;
+
+	ret = regmap_update_bits(bq->regmap, BQ25980_BATOCP,
+				BQ25980_BATOCP_MASK, batocp_reg_code);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(bq->regmap, BQ25980_BATOCP_ALM,
+				BQ25980_BATOCP_MASK, batocp_reg_code);
+}
+
+static int bq25980_get_const_charge_volt(struct bq25980_device *bq)
+{
+	unsigned int batovp_reg_code;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_BATOVP, &batovp_reg_code);
+	if (ret)
+		return ret;
+
+	return ((batovp_reg_code * bq->chip_info->batovp_step) +
+			bq->chip_info->batovp_offset);
+}
+
+static int bq25980_set_const_charge_volt(struct bq25980_device *bq, int batovp)
+{
+	unsigned int batovp_reg_code;
+	int ret;
+
+	if (batovp < bq->chip_info->batovp_min)
+		batovp = bq->chip_info->batovp_min;
+
+	if (batovp > bq->chip_info->batovp_max)
+		batovp = bq->chip_info->batovp_max;
+
+	batovp_reg_code = (batovp - bq->chip_info->batovp_offset) /
+						bq->chip_info->batovp_step;
+
+	ret = regmap_write(bq->regmap, BQ25980_BATOVP, batovp_reg_code);
+	if (ret)
+		return ret;
+
+	return regmap_write(bq->regmap, BQ25980_BATOVP_ALM, batovp_reg_code);
+}
+
+static int bq25980_set_bypass(struct bq25980_device *bq, bool en_bypass)
+{
+	int ret;
+
+	if (en_bypass)
+		ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+					BQ25980_EN_BYPASS, BQ25980_EN_BYPASS);
+	else
+		ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+					BQ25980_EN_BYPASS, en_bypass);
+	if (ret)
+		return ret;
+
+	bq->state.bypass = en_bypass;
+
+	return bq->state.bypass;
+}
+
+static int bq25980_set_chg_en(struct bq25980_device *bq, bool en_chg)
+{
+	int ret;
+
+	if (en_chg)
+		ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+					BQ25980_CHG_EN, BQ25980_CHG_EN);
+	else
+		ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+					BQ25980_CHG_EN, en_chg);
+	if (ret)
+		return ret;
+
+	bq->state.ce = en_chg;
+
+	return 0;
+}
+
+static int bq25980_get_adc_ibus(struct bq25980_device *bq)
+{
+	int ibus_adc_lsb, ibus_adc_msb;
+	u16 ibus_adc;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_MSB, &ibus_adc_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_LSB, &ibus_adc_lsb);
+	if (ret)
+		return ret;
+
+	ibus_adc = (ibus_adc_msb << 8) | ibus_adc_lsb;
+
+	if (ibus_adc_msb & BQ25980_ADC_POLARITY_BIT)
+		return ((ibus_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA;
+
+	return ibus_adc * BQ25980_ADC_CURR_STEP_uA;
+}
+
+static int bq25980_get_adc_vbus(struct bq25980_device *bq)
+{
+	int vbus_adc_lsb, vbus_adc_msb;
+	u16 vbus_adc;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_MSB, &vbus_adc_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_LSB, &vbus_adc_lsb);
+	if (ret)
+		return ret;
+
+	vbus_adc = (vbus_adc_msb << 8) | vbus_adc_lsb;
+
+	return vbus_adc * BQ25980_ADC_VOLT_STEP_uV;
+}
+
+static int bq25980_get_ibat_adc(struct bq25980_device *bq)
+{
+	int ret;
+	int ibat_adc_lsb, ibat_adc_msb;
+	int ibat_adc;
+
+	ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_LSB, &ibat_adc_lsb);
+	if (ret)
+		return ret;
+
+	ibat_adc = (ibat_adc_msb << 8) | ibat_adc_lsb;
+
+	if (ibat_adc_msb & BQ25980_ADC_POLARITY_BIT)
+		return ((ibat_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA;
+
+	return ibat_adc * BQ25980_ADC_CURR_STEP_uA;
+}
+
+static int bq25980_get_adc_vbat(struct bq25980_device *bq)
+{
+	int vsys_adc_lsb, vsys_adc_msb;
+	u16 vsys_adc;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_MSB, &vsys_adc_msb);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_LSB, &vsys_adc_lsb);
+	if (ret)
+		return ret;
+
+	vsys_adc = (vsys_adc_msb << 8) | vsys_adc_lsb;
+
+	return vsys_adc * BQ25980_ADC_VOLT_STEP_uV;
+}
+
+static int bq25980_get_state(struct bq25980_device *bq,
+				struct bq25980_state *state)
+{
+	unsigned int chg_ctrl_2;
+	unsigned int stat1;
+	unsigned int stat2;
+	unsigned int stat3;
+	unsigned int stat4;
+	unsigned int ibat_adc_msb;
+	int ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_STAT1, &stat1);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_STAT2, &stat2);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_STAT3, &stat3);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_STAT4, &stat4);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_CHRGR_CTRL_2, &chg_ctrl_2);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb);
+	if (ret)
+		return ret;
+
+	state->dischg = ibat_adc_msb & BQ25980_ADC_POLARITY_BIT;
+	state->ovp = (stat1 & BQ25980_STAT1_OVP_MASK) |
+		(stat3 & BQ25980_STAT3_OVP_MASK);
+	state->ocp = (stat1 & BQ25980_STAT1_OCP_MASK) |
+		(stat2 & BQ25980_STAT2_OCP_MASK);
+	state->tflt = stat4 & BQ25980_STAT4_TFLT_MASK;
+	state->wdt = stat4 & BQ25980_WD_STAT;
+	state->online = stat3 & BQ25980_PRESENT_MASK;
+	state->ce = chg_ctrl_2 & BQ25980_CHG_EN;
+	state->hiz = chg_ctrl_2 & BQ25980_EN_HIZ;
+	state->bypass = chg_ctrl_2 & BQ25980_EN_BYPASS;
+
+	return 0;
+}
+
+static int bq25980_get_battery_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct bq25980_device *bq = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = bq->init_data.ichg_max;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = bq->init_data.vreg_max;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq25980_get_ibat_adc(bq);
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq25980_get_adc_vbat(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq25980_set_charger_property(struct power_supply *psy,
+		enum power_supply_property prop,
+		const union power_supply_propval *val)
+{
+	struct bq25980_device *bq = power_supply_get_drvdata(psy);
+	int ret = -EINVAL;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq25980_set_input_curr_lim(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = bq25980_set_input_volt_lim(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq25980_set_bypass(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq25980_set_chg_en(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq25980_set_const_charge_curr(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq25980_set_const_charge_volt(bq, val->intval);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int bq25980_get_charger_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct bq25980_device *bq = power_supply_get_drvdata(psy);
+	struct bq25980_state state;
+	int ret = 0;
+
+	mutex_lock(&bq->lock);
+	ret = bq25980_get_state(bq, &state);
+	mutex_unlock(&bq->lock);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ25980_MANUFACTURER;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bq->model_name;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = state.online;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = bq25980_get_input_volt_lim(bq);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = bq25980_get_input_curr_lim(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+		if (state.tflt)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (state.ovp)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else if (state.ocp)
+			val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT;
+		else if (state.wdt)
+			val->intval =
+				POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+		if ((state.ce) && (!state.hiz))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (state.dischg)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (!state.ce)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+		if (!state.ce)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		else if (state.bypass)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_BYPASS;
+		else if (!state.bypass)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq25980_get_adc_ibus(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq25980_get_adc_vbus(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq25980_get_const_charge_curr(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq25980_get_const_charge_volt(bq);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static bool bq25980_state_changed(struct bq25980_device *bq,
+				  struct bq25980_state *new_state)
+{
+	struct bq25980_state old_state;
+
+	mutex_lock(&bq->lock);
+	old_state = bq->state;
+	mutex_unlock(&bq->lock);
+
+	return (old_state.dischg != new_state->dischg ||
+		old_state.ovp != new_state->ovp ||
+		old_state.ocp != new_state->ocp ||
+		old_state.online != new_state->online ||
+		old_state.wdt != new_state->wdt ||
+		old_state.tflt != new_state->tflt ||
+		old_state.ce != new_state->ce ||
+		old_state.hiz != new_state->hiz ||
+		old_state.bypass != new_state->bypass);
+}
+
+static irqreturn_t bq25980_irq_handler_thread(int irq, void *private)
+{
+	struct bq25980_device *bq = private;
+	struct bq25980_state state;
+	int ret;
+
+	ret = bq25980_get_state(bq, &state);
+	if (ret < 0)
+		goto irq_out;
+
+	if (!bq25980_state_changed(bq, &state))
+		goto irq_out;
+
+	mutex_lock(&bq->lock);
+	bq->state = state;
+	mutex_unlock(&bq->lock);
+
+	power_supply_changed(bq->charger);
+
+irq_out:
+	return IRQ_HANDLED;
+}
+
+static enum power_supply_property bq25980_power_supply_props[] = {
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static enum power_supply_property bq25980_battery_props[] = {
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static char *bq25980_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static int bq25980_property_is_writeable(struct power_supply *psy,
+					 enum power_supply_property prop)
+{
+	switch (prop) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct power_supply_desc bq25980_power_supply_desc = {
+	.name = "bq25980-charger",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = bq25980_power_supply_props,
+	.num_properties = ARRAY_SIZE(bq25980_power_supply_props),
+	.get_property = bq25980_get_charger_property,
+	.set_property = bq25980_set_charger_property,
+	.property_is_writeable = bq25980_property_is_writeable,
+};
+
+static struct power_supply_desc bq25980_battery_desc = {
+	.name			= "bq25980-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= bq25980_get_battery_property,
+	.properties		= bq25980_battery_props,
+	.num_properties		= ARRAY_SIZE(bq25980_battery_props),
+	.property_is_writeable	= bq25980_property_is_writeable,
+};
+
+
+static bool bq25980_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BQ25980_CHRGR_CTRL_2:
+	case BQ25980_STAT1...BQ25980_FLAG5:
+	case BQ25980_ADC_CONTROL1...BQ25980_TDIE_ADC_LSB:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bq25980_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ25980_CHRGR_CTRL_6,
+	.reg_defaults	= bq25980_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq25980_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct regmap_config bq25975_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ25980_CHRGR_CTRL_6,
+	.reg_defaults	= bq25975_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq25975_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct regmap_config bq25960_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BQ25980_CHRGR_CTRL_6,
+	.reg_defaults	= bq25960_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(bq25960_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct bq25980_chip_info bq25980_chip_info_tbl[] = {
+	[BQ25980] = {
+		.model_id = BQ25980,
+		.regmap_config = &bq25980_regmap_config,
+
+		.busocp_def = BQ25980_BUSOCP_DFLT_uA,
+		.busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA,
+		.busocp_sc_max = BQ25980_BUSOCP_SC_MAX_uA,
+		.busocp_byp_max = BQ25980_BUSOCP_BYP_MAX_uA,
+		.busocp_byp_min = BQ25980_BUSOCP_MIN_uA,
+
+		.busovp_sc_def = BQ25980_BUSOVP_DFLT_uV,
+		.busovp_byp_def = BQ25980_BUSOVP_BYPASS_DFLT_uV,
+		.busovp_sc_step = BQ25980_BUSOVP_SC_STEP_uV,
+		.busovp_sc_offset = BQ25980_BUSOVP_SC_OFFSET_uV,
+		.busovp_byp_step = BQ25980_BUSOVP_BYP_STEP_uV,
+		.busovp_byp_offset = BQ25980_BUSOVP_BYP_OFFSET_uV,
+		.busovp_sc_min = BQ25980_BUSOVP_SC_MIN_uV,
+		.busovp_sc_max = BQ25980_BUSOVP_SC_MAX_uV,
+		.busovp_byp_min = BQ25980_BUSOVP_BYP_MIN_uV,
+		.busovp_byp_max = BQ25980_BUSOVP_BYP_MAX_uV,
+
+		.batovp_def = BQ25980_BATOVP_DFLT_uV,
+		.batovp_max = BQ25980_BATOVP_MAX_uV,
+		.batovp_min = BQ25980_BATOVP_MIN_uV,
+		.batovp_step = BQ25980_BATOVP_STEP_uV,
+		.batovp_offset = BQ25980_BATOVP_OFFSET_uV,
+
+		.batocp_def = BQ25980_BATOCP_DFLT_uA,
+		.batocp_max = BQ25980_BATOCP_MAX_uA,
+	},
+
+	[BQ25975] = {
+		.model_id = BQ25975,
+		.regmap_config = &bq25975_regmap_config,
+
+		.busocp_def = BQ25975_BUSOCP_DFLT_uA,
+		.busocp_sc_min = BQ25975_BUSOCP_SC_MAX_uA,
+		.busocp_sc_max = BQ25975_BUSOCP_SC_MAX_uA,
+		.busocp_byp_min = BQ25980_BUSOCP_MIN_uA,
+		.busocp_byp_max = BQ25975_BUSOCP_BYP_MAX_uA,
+
+		.busovp_sc_def = BQ25975_BUSOVP_DFLT_uV,
+		.busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV,
+		.busovp_sc_step = BQ25975_BUSOVP_SC_STEP_uV,
+		.busovp_sc_offset = BQ25975_BUSOVP_SC_OFFSET_uV,
+		.busovp_byp_step = BQ25975_BUSOVP_BYP_STEP_uV,
+		.busovp_byp_offset = BQ25975_BUSOVP_BYP_OFFSET_uV,
+		.busovp_sc_min = BQ25975_BUSOVP_SC_MIN_uV,
+		.busovp_sc_max = BQ25975_BUSOVP_SC_MAX_uV,
+		.busovp_byp_min = BQ25975_BUSOVP_BYP_MIN_uV,
+		.busovp_byp_max = BQ25975_BUSOVP_BYP_MAX_uV,
+
+		.batovp_def = BQ25975_BATOVP_DFLT_uV,
+		.batovp_max = BQ25975_BATOVP_MAX_uV,
+		.batovp_min = BQ25975_BATOVP_MIN_uV,
+		.batovp_step = BQ25975_BATOVP_STEP_uV,
+		.batovp_offset = BQ25975_BATOVP_OFFSET_uV,
+
+		.batocp_def = BQ25980_BATOCP_DFLT_uA,
+		.batocp_max = BQ25980_BATOCP_MAX_uA,
+	},
+
+	[BQ25960] = {
+		.model_id = BQ25960,
+		.regmap_config = &bq25960_regmap_config,
+
+		.busocp_def = BQ25960_BUSOCP_DFLT_uA,
+		.busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA,
+		.busocp_sc_max = BQ25960_BUSOCP_SC_MAX_uA,
+		.busocp_byp_min = BQ25960_BUSOCP_SC_MAX_uA,
+		.busocp_byp_max = BQ25960_BUSOCP_BYP_MAX_uA,
+
+		.busovp_sc_def = BQ25975_BUSOVP_DFLT_uV,
+		.busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV,
+		.busovp_sc_step = BQ25960_BUSOVP_SC_STEP_uV,
+		.busovp_sc_offset = BQ25960_BUSOVP_SC_OFFSET_uV,
+		.busovp_byp_step = BQ25960_BUSOVP_BYP_STEP_uV,
+		.busovp_byp_offset = BQ25960_BUSOVP_BYP_OFFSET_uV,
+		.busovp_sc_min = BQ25960_BUSOVP_SC_MIN_uV,
+		.busovp_sc_max = BQ25960_BUSOVP_SC_MAX_uV,
+		.busovp_byp_min = BQ25960_BUSOVP_BYP_MIN_uV,
+		.busovp_byp_max = BQ25960_BUSOVP_BYP_MAX_uV,
+
+		.batovp_def = BQ25960_BATOVP_DFLT_uV,
+		.batovp_max = BQ25960_BATOVP_MAX_uV,
+		.batovp_min = BQ25960_BATOVP_MIN_uV,
+		.batovp_step = BQ25960_BATOVP_STEP_uV,
+		.batovp_offset = BQ25960_BATOVP_OFFSET_uV,
+
+		.batocp_def = BQ25960_BATOCP_DFLT_uA,
+		.batocp_max = BQ25960_BATOCP_MAX_uA,
+	},
+};
+
+static int bq25980_power_supply_init(struct bq25980_device *bq,
+							struct device *dev)
+{
+	struct power_supply_config psy_cfg = { .drv_data = bq,
+						.of_node = dev->of_node, };
+
+	psy_cfg.supplied_to = bq25980_charger_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(bq25980_charger_supplied_to);
+
+	bq->charger = devm_power_supply_register(bq->dev,
+						 &bq25980_power_supply_desc,
+						 &psy_cfg);
+	if (IS_ERR(bq->charger))
+		return -EINVAL;
+
+	bq->battery = devm_power_supply_register(bq->dev,
+						      &bq25980_battery_desc,
+						      &psy_cfg);
+	if (IS_ERR(bq->battery))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int bq25980_hw_init(struct bq25980_device *bq)
+{
+	struct power_supply_battery_info *bat_info;
+	int wd_reg_val = BQ25980_WATCHDOG_DIS;
+	int wd_max_val = BQ25980_NUM_WD_VAL - 1;
+	int ret = 0;
+	int curr_val;
+	int volt_val;
+	int i;
+
+	if (bq->watchdog_timer) {
+		if (bq->watchdog_timer >= bq25980_watchdog_time[wd_max_val])
+			wd_reg_val = wd_max_val;
+		else {
+			for (i = 0; i < wd_max_val; i++) {
+				if (bq->watchdog_timer > bq25980_watchdog_time[i] &&
+				    bq->watchdog_timer < bq25980_watchdog_time[i + 1]) {
+					wd_reg_val = i;
+					break;
+				}
+			}
+		}
+	}
+
+	ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_3,
+				 BQ25980_WATCHDOG_MASK, wd_reg_val);
+	if (ret)
+		return ret;
+
+	ret = power_supply_get_battery_info(bq->charger, &bat_info);
+	if (ret) {
+		dev_warn(bq->dev, "battery info missing\n");
+		return -EINVAL;
+	}
+
+	bq->init_data.ichg_max = bat_info->constant_charge_current_max_ua;
+	bq->init_data.vreg_max = bat_info->constant_charge_voltage_max_uv;
+
+	if (bq->state.bypass) {
+		ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+					BQ25980_EN_BYPASS, BQ25980_EN_BYPASS);
+		if (ret)
+			return ret;
+
+		curr_val = bq->init_data.bypass_ilim;
+		volt_val = bq->init_data.bypass_vlim;
+	} else {
+		curr_val = bq->init_data.sc_ilim;
+		volt_val = bq->init_data.sc_vlim;
+	}
+
+	ret = bq25980_set_input_curr_lim(bq, curr_val);
+	if (ret)
+		return ret;
+
+	ret = bq25980_set_input_volt_lim(bq, volt_val);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(bq->regmap, BQ25980_ADC_CONTROL1,
+				 BQ25980_ADC_EN, BQ25980_ADC_EN);
+}
+
+static int bq25980_parse_dt(struct bq25980_device *bq)
+{
+	int ret;
+
+	ret = device_property_read_u32(bq->dev, "ti,watchdog-timeout-ms",
+				       &bq->watchdog_timer);
+	if (ret)
+		bq->watchdog_timer = BQ25980_WATCHDOG_MIN;
+
+	if (bq->watchdog_timer > BQ25980_WATCHDOG_MAX ||
+	    bq->watchdog_timer < BQ25980_WATCHDOG_MIN)
+		return -EINVAL;
+
+	ret = device_property_read_u32(bq->dev,
+				       "ti,sc-ovp-limit-microvolt",
+				       &bq->init_data.sc_vlim);
+	if (ret)
+		bq->init_data.sc_vlim = bq->chip_info->busovp_sc_def;
+
+	if (bq->init_data.sc_vlim > bq->chip_info->busovp_sc_max ||
+	    bq->init_data.sc_vlim < bq->chip_info->busovp_sc_min) {
+		dev_err(bq->dev, "SC ovp limit is out of range\n");
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32(bq->dev,
+				       "ti,sc-ocp-limit-microamp",
+				       &bq->init_data.sc_ilim);
+	if (ret)
+		bq->init_data.sc_ilim = bq->chip_info->busocp_def;
+
+	if (bq->init_data.sc_ilim > bq->chip_info->busocp_sc_max ||
+	    bq->init_data.sc_ilim < bq->chip_info->busocp_sc_min) {
+		dev_err(bq->dev, "SC ocp limit is out of range\n");
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32(bq->dev,
+				       "ti,bypass-ovp-limit-microvolt",
+				       &bq->init_data.bypass_vlim);
+	if (ret)
+		bq->init_data.bypass_vlim = bq->chip_info->busovp_byp_def;
+
+	if (bq->init_data.bypass_vlim > bq->chip_info->busovp_byp_max ||
+	    bq->init_data.bypass_vlim < bq->chip_info->busovp_byp_min) {
+		dev_err(bq->dev, "Bypass ovp limit is out of range\n");
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32(bq->dev,
+				       "ti,bypass-ocp-limit-microamp",
+				       &bq->init_data.bypass_ilim);
+	if (ret)
+		bq->init_data.bypass_ilim = bq->chip_info->busocp_def;
+
+	if (bq->init_data.bypass_ilim > bq->chip_info->busocp_byp_max ||
+	    bq->init_data.bypass_ilim < bq->chip_info->busocp_byp_min) {
+		dev_err(bq->dev, "Bypass ocp limit is out of range\n");
+		return -EINVAL;
+	}
+
+
+	bq->state.bypass = device_property_read_bool(bq->dev,
+						      "ti,bypass-enable");
+	return 0;
+}
+
+static int bq25980_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct bq25980_device *bq;
+	int ret;
+
+	bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+	if (!bq)
+		return -ENOMEM;
+
+	bq->client = client;
+	bq->dev = dev;
+
+	mutex_init(&bq->lock);
+
+	strncpy(bq->model_name, id->name, I2C_NAME_SIZE);
+	bq->chip_info = &bq25980_chip_info_tbl[id->driver_data];
+
+	bq->regmap = devm_regmap_init_i2c(client,
+					  bq->chip_info->regmap_config);
+	if (IS_ERR(bq->regmap)) {
+		dev_err(dev, "Failed to allocate register map\n");
+		return PTR_ERR(bq->regmap);
+	}
+
+	i2c_set_clientdata(client, bq);
+
+	ret = bq25980_parse_dt(bq);
+	if (ret) {
+		dev_err(dev, "Failed to read device tree properties%d\n", ret);
+		return ret;
+	}
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						bq25980_irq_handler_thread,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						dev_name(&client->dev), bq);
+		if (ret)
+			return ret;
+	}
+
+	ret = bq25980_power_supply_init(bq, dev);
+	if (ret) {
+		dev_err(dev, "Failed to register power supply\n");
+		return ret;
+	}
+
+	ret = bq25980_hw_init(bq);
+	if (ret) {
+		dev_err(dev, "Cannot initialize the chip.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id bq25980_i2c_ids[] = {
+	{ "bq25980", BQ25980 },
+	{ "bq25975", BQ25975 },
+	{ "bq25960", BQ25960 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq25980_i2c_ids);
+
+static const struct of_device_id bq25980_of_match[] = {
+	{ .compatible = "ti,bq25980", .data = (void *)BQ25980 },
+	{ .compatible = "ti,bq25975", .data = (void *)BQ25975 },
+	{ .compatible = "ti,bq25960", .data = (void *)BQ25960 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq25980_of_match);
+
+static struct i2c_driver bq25980_driver = {
+	.driver = {
+		.name = "bq25980-charger",
+		.of_match_table = bq25980_of_match,
+	},
+	.probe = bq25980_probe,
+	.id_table = bq25980_i2c_ids,
+};
+module_i2c_driver(bq25980_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
+MODULE_DESCRIPTION("bq25980 charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq25980_charger.h b/drivers/power/supply/bq25980_charger.h
new file mode 100644
index 000000000..39f94eba5
--- /dev/null
+++ b/drivers/power/supply/bq25980_charger.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ */
+
+#ifndef BQ25980_CHARGER_H
+#define BQ25980_CHARGER_H
+
+#define BQ25980_MANUFACTURER "Texas Instruments"
+
+#define BQ25980_BATOVP			0x0
+#define BQ25980_BATOVP_ALM		0x1
+#define BQ25980_BATOCP			0x2
+#define BQ25980_BATOCP_ALM		0x3
+#define BQ25980_BATUCP_ALM		0x4
+#define BQ25980_CHRGR_CTRL_1	0x5
+#define BQ25980_BUSOVP			0x6
+#define BQ25980_BUSOVP_ALM		0x7
+#define BQ25980_BUSOCP			0x8
+#define BQ25980_BUSOCP_ALM		0x9
+#define BQ25980_TEMP_CONTROL		0xA
+#define BQ25980_TDIE_ALM		0xB
+#define BQ25980_TSBUS_FLT		0xC
+#define BQ25980_TSBAT_FLG		0xD
+#define BQ25980_VAC_CONTROL		0xE
+#define BQ25980_CHRGR_CTRL_2	0xF
+#define BQ25980_CHRGR_CTRL_3	0x10
+#define BQ25980_CHRGR_CTRL_4	0x11
+#define BQ25980_CHRGR_CTRL_5	0x12
+#define BQ25980_STAT1			0x13
+#define BQ25980_STAT2			0x14
+#define BQ25980_STAT3			0x15
+#define BQ25980_STAT4			0x16
+#define BQ25980_STAT5			0x17
+#define BQ25980_FLAG1			0x18
+#define BQ25980_FLAG2			0x19
+#define BQ25980_FLAG3			0x1A
+#define BQ25980_FLAG4			0x1B
+#define BQ25980_FLAG5			0x1C
+#define BQ25980_MASK1			0x1D
+#define BQ25980_MASK2			0x1E
+#define BQ25980_MASK3			0x1F
+#define BQ25980_MASK4			0x20
+#define BQ25980_MASK5			0x21
+#define BQ25980_DEVICE_INFO		0x22
+#define BQ25980_ADC_CONTROL1		0x23
+#define BQ25980_ADC_CONTROL2		0x24
+#define BQ25980_IBUS_ADC_MSB		0x25
+#define BQ25980_IBUS_ADC_LSB		0x26
+#define BQ25980_VBUS_ADC_MSB		0x27
+#define BQ25980_VBUS_ADC_LSB		0x28
+#define BQ25980_VAC1_ADC_MSB		0x29
+#define BQ25980_VAC1_ADC_LSB		0x2A
+#define BQ25980_VAC2_ADC_MSB		0x2B
+#define BQ25980_VAC2_ADC_LSB		0x2C
+#define BQ25980_VOUT_ADC_MSB		0x2D
+#define BQ25980_VOUT_ADC_LSB		0x2E
+#define BQ25980_VBAT_ADC_MSB		0x2F
+#define BQ25980_VBAT_ADC_LSB		0x30
+#define BQ25980_IBAT_ADC_MSB		0x31
+#define BQ25980_IBAT_ADC_LSB		0x32
+#define BQ25980_TSBUS_ADC_MSB		0x33
+#define BQ25980_TSBUS_ADC_LSB		0x34
+#define BQ25980_TSBAT_ADC_MSB		0x35
+#define BQ25980_TSBAT_ADC_LSB		0x36
+#define BQ25980_TDIE_ADC_MSB		0x37
+#define BQ25980_TDIE_ADC_LSB		0x38
+#define BQ25980_DEGLITCH_TIME		0x39
+#define BQ25980_CHRGR_CTRL_6	0x3A
+
+#define BQ25980_BUSOCP_STEP_uA		250000
+#define BQ25980_BUSOCP_OFFSET_uA	1000000
+
+#define BQ25980_BUSOCP_DFLT_uA		4250000
+#define BQ25975_BUSOCP_DFLT_uA		4250000
+#define BQ25960_BUSOCP_DFLT_uA		3250000
+
+#define BQ25980_BUSOCP_MIN_uA		1000000
+
+#define BQ25980_BUSOCP_SC_MAX_uA	5750000
+#define BQ25975_BUSOCP_SC_MAX_uA	5750000
+#define BQ25960_BUSOCP_SC_MAX_uA	3750000
+
+#define BQ25980_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25975_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25960_BUSOCP_BYP_MAX_uA	5750000
+
+#define BQ25980_BUSOVP_SC_STEP_uV	100000
+#define BQ25975_BUSOVP_SC_STEP_uV	50000
+#define BQ25960_BUSOVP_SC_STEP_uV	50000
+#define BQ25980_BUSOVP_SC_OFFSET_uV	14000000
+#define BQ25975_BUSOVP_SC_OFFSET_uV	7000000
+#define BQ25960_BUSOVP_SC_OFFSET_uV	7000000
+
+#define BQ25980_BUSOVP_BYP_STEP_uV	50000
+#define BQ25975_BUSOVP_BYP_STEP_uV	25000
+#define BQ25960_BUSOVP_BYP_STEP_uV	25000
+#define BQ25980_BUSOVP_BYP_OFFSET_uV	7000000
+#define BQ25975_BUSOVP_BYP_OFFSET_uV	3500000
+#define BQ25960_BUSOVP_BYP_OFFSET_uV	3500000
+
+#define BQ25980_BUSOVP_DFLT_uV		17800000
+#define BQ25980_BUSOVP_BYPASS_DFLT_uV	8900000
+#define BQ25975_BUSOVP_DFLT_uV		8900000
+#define BQ25975_BUSOVP_BYPASS_DFLT_uV	4450000
+#define BQ25960_BUSOVP_DFLT_uV		8900000
+
+#define BQ25980_BUSOVP_SC_MIN_uV	14000000
+#define BQ25975_BUSOVP_SC_MIN_uV	7000000
+#define BQ25960_BUSOVP_SC_MIN_uV	7000000
+#define BQ25980_BUSOVP_BYP_MIN_uV	7000000
+#define BQ25975_BUSOVP_BYP_MIN_uV	3500000
+#define BQ25960_BUSOVP_BYP_MIN_uV	3500000
+
+#define BQ25980_BUSOVP_SC_MAX_uV	22000000
+#define BQ25975_BUSOVP_SC_MAX_uV	12750000
+#define BQ25960_BUSOVP_SC_MAX_uV	12750000
+
+#define BQ25980_BUSOVP_BYP_MAX_uV	12750000
+#define BQ25975_BUSOVP_BYP_MAX_uV	6500000
+#define BQ25960_BUSOVP_BYP_MAX_uV	6500000
+
+#define BQ25980_BATOVP_STEP_uV		20000
+#define BQ25975_BATOVP_STEP_uV		10000
+#define BQ25960_BATOVP_STEP_uV		10000
+
+#define BQ25980_BATOVP_OFFSET_uV	7000000
+#define BQ25975_BATOVP_OFFSET_uV	3500000
+#define BQ25960_BATOVP_OFFSET_uV	3500000
+
+#define BQ25980_BATOVP_DFLT_uV		14000000
+#define BQ25975_BATOVP_DFLT_uV		8900000
+#define BQ25960_BATOVP_DFLT_uV		8900000
+
+#define BQ25980_BATOVP_MIN_uV		7000000
+#define BQ25975_BATOVP_MIN_uV		3500000
+#define BQ25960_BATOVP_MIN_uV		3500000
+
+#define BQ25980_BATOVP_MAX_uV		9540000
+#define BQ25975_BATOVP_MAX_uV		4770000
+#define BQ25960_BATOVP_MAX_uV		4770000
+
+#define BQ25980_BATOCP_STEP_uA		100000
+
+#define BQ25980_BATOCP_MASK		GENMASK(6, 0)
+
+#define BQ25980_BATOCP_DFLT_uA		8100000
+#define BQ25960_BATOCP_DFLT_uA		6100000
+
+#define BQ25980_BATOCP_MIN_uA		2000000
+
+#define BQ25980_BATOCP_MAX_uA		11000000
+#define BQ25975_BATOCP_MAX_uA		11000000
+#define BQ25960_BATOCP_MAX_uA		7000000
+
+#define BQ25980_ENABLE_HIZ		0xff
+#define BQ25980_DISABLE_HIZ		0x0
+#define BQ25980_EN_BYPASS		BIT(3)
+#define BQ25980_STAT1_OVP_MASK		(BIT(6) | BIT(5) | BIT(0))
+#define BQ25980_STAT3_OVP_MASK		(BIT(7) | BIT(6))
+#define BQ25980_STAT1_OCP_MASK		BIT(3)
+#define BQ25980_STAT2_OCP_MASK		(BIT(6) | BIT(1))
+#define BQ25980_STAT4_TFLT_MASK		GENMASK(5, 1)
+#define BQ25980_WD_STAT			BIT(0)
+#define BQ25980_PRESENT_MASK		GENMASK(4, 2)
+#define BQ25980_CHG_EN			BIT(4)
+#define BQ25980_EN_HIZ			BIT(6)
+#define BQ25980_ADC_EN			BIT(7)
+
+#define BQ25980_ADC_VOLT_STEP_uV        1000
+#define BQ25980_ADC_CURR_STEP_uA        1000
+#define BQ25980_ADC_POLARITY_BIT	BIT(7)
+
+#define BQ25980_WATCHDOG_MASK	GENMASK(4, 3)
+#define BQ25980_WATCHDOG_DIS	BIT(2)
+#define BQ25980_WATCHDOG_MAX	300000
+#define BQ25980_WATCHDOG_MIN	0
+#define BQ25980_NUM_WD_VAL	4
+
+#endif /* BQ25980_CHARGER_H */
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
new file mode 100644
index 000000000..4a5371a3a
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -0,0 +1,2167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery driver
+ *
+ * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011 Pali Rohár <pali@kernel.org>
+ * Copyright (C) 2017 Liam Breck <kernel@networkimprov.net>
+ *
+ * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq27000
+ * https://www.ti.com/product/bq27200
+ * https://www.ti.com/product/bq27010
+ * https://www.ti.com/product/bq27210
+ * https://www.ti.com/product/bq27500
+ * https://www.ti.com/product/bq27510-g1
+ * https://www.ti.com/product/bq27510-g2
+ * https://www.ti.com/product/bq27510-g3
+ * https://www.ti.com/product/bq27520-g1
+ * https://www.ti.com/product/bq27520-g2
+ * https://www.ti.com/product/bq27520-g3
+ * https://www.ti.com/product/bq27520-g4
+ * https://www.ti.com/product/bq27530-g1
+ * https://www.ti.com/product/bq27531-g1
+ * https://www.ti.com/product/bq27541-g1
+ * https://www.ti.com/product/bq27542-g1
+ * https://www.ti.com/product/bq27546-g1
+ * https://www.ti.com/product/bq27742-g1
+ * https://www.ti.com/product/bq27545-g1
+ * https://www.ti.com/product/bq27421-g1
+ * https://www.ti.com/product/bq27425-g1
+ * https://www.ti.com/product/bq27426
+ * https://www.ti.com/product/bq27411-g1
+ * https://www.ti.com/product/bq27441-g1
+ * https://www.ti.com/product/bq27621-g1
+ * https://www.ti.com/product/bq27z561
+ * https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
+ * https://www.ti.com/product/bq78z100
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/power/bq27xxx_battery.h>
+
+#define BQ27XXX_MANUFACTURER	"Texas Instruments"
+
+/* BQ27XXX Flags */
+#define BQ27XXX_FLAG_DSC	BIT(0)
+#define BQ27XXX_FLAG_SOCF	BIT(1) /* State-of-Charge threshold final */
+#define BQ27XXX_FLAG_SOC1	BIT(2) /* State-of-Charge threshold 1 */
+#define BQ27XXX_FLAG_CFGUP	BIT(4)
+#define BQ27XXX_FLAG_FC		BIT(9)
+#define BQ27XXX_FLAG_OTD	BIT(14)
+#define BQ27XXX_FLAG_OTC	BIT(15)
+#define BQ27XXX_FLAG_UT		BIT(14)
+#define BQ27XXX_FLAG_OT		BIT(15)
+
+/* BQ27000 has different layout for Flags register */
+#define BQ27000_FLAG_EDVF	BIT(0) /* Final End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_EDV1	BIT(1) /* First End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_CI		BIT(4) /* Capacity Inaccurate flag */
+#define BQ27000_FLAG_FC		BIT(5)
+#define BQ27000_FLAG_CHGS	BIT(7) /* Charge state flag */
+
+/* BQ27Z561 has different layout for Flags register */
+#define BQ27Z561_FLAG_FDC	BIT(4) /* Battery fully discharged */
+#define BQ27Z561_FLAG_FC	BIT(5) /* Battery fully charged */
+#define BQ27Z561_FLAG_DIS_CH	BIT(6) /* Battery is discharging */
+
+/* control register params */
+#define BQ27XXX_SEALED			0x20
+#define BQ27XXX_SET_CFGUPDATE		0x13
+#define BQ27XXX_SOFT_RESET		0x42
+#define BQ27XXX_RESET			0x41
+
+#define BQ27XXX_RS			(20) /* Resistor sense mOhm */
+#define BQ27XXX_POWER_CONSTANT		(29200) /* 29.2 µV^2 * 1000 */
+#define BQ27XXX_CURRENT_CONSTANT	(3570) /* 3.57 µV * 1000 */
+
+#define INVALID_REG_ADDR	0xff
+
+/*
+ * bq27xxx_reg_index - Register names
+ *
+ * These are indexes into a device's register mapping array.
+ */
+
+enum bq27xxx_reg_index {
+	BQ27XXX_REG_CTRL = 0,	/* Control */
+	BQ27XXX_REG_TEMP,	/* Temperature */
+	BQ27XXX_REG_INT_TEMP,	/* Internal Temperature */
+	BQ27XXX_REG_VOLT,	/* Voltage */
+	BQ27XXX_REG_AI,		/* Average Current */
+	BQ27XXX_REG_FLAGS,	/* Flags */
+	BQ27XXX_REG_TTE,	/* Time-to-Empty */
+	BQ27XXX_REG_TTF,	/* Time-to-Full */
+	BQ27XXX_REG_TTES,	/* Time-to-Empty Standby */
+	BQ27XXX_REG_TTECP,	/* Time-to-Empty at Constant Power */
+	BQ27XXX_REG_NAC,	/* Nominal Available Capacity */
+	BQ27XXX_REG_RC,		/* Remaining Capacity */
+	BQ27XXX_REG_FCC,	/* Full Charge Capacity */
+	BQ27XXX_REG_CYCT,	/* Cycle Count */
+	BQ27XXX_REG_AE,		/* Available Energy */
+	BQ27XXX_REG_SOC,	/* State-of-Charge */
+	BQ27XXX_REG_DCAP,	/* Design Capacity */
+	BQ27XXX_REG_AP,		/* Average Power */
+	BQ27XXX_DM_CTRL,	/* Block Data Control */
+	BQ27XXX_DM_CLASS,	/* Data Class */
+	BQ27XXX_DM_BLOCK,	/* Data Block */
+	BQ27XXX_DM_DATA,	/* Block Data */
+	BQ27XXX_DM_CKSUM,	/* Block Data Checksum */
+	BQ27XXX_REG_MAX,	/* sentinel */
+};
+
+#define BQ27XXX_DM_REG_ROWS \
+	[BQ27XXX_DM_CTRL] = 0x61,  \
+	[BQ27XXX_DM_CLASS] = 0x3e, \
+	[BQ27XXX_DM_BLOCK] = 0x3f, \
+	[BQ27XXX_DM_DATA] = 0x40,  \
+	[BQ27XXX_DM_CKSUM] = 0x60
+
+/* Register mappings */
+static u8
+	bq27000_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x0b,
+		[BQ27XXX_REG_DCAP] = 0x76,
+		[BQ27XXX_REG_AP] = 0x24,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
+	bq27010_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x0b,
+		[BQ27XXX_REG_DCAP] = 0x76,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
+	bq2750x_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = 0x1a,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		BQ27XXX_DM_REG_ROWS,
+	},
+#define bq2751x_regs bq27510g3_regs
+#define bq2752x_regs bq27510g3_regs
+	bq27500_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+#define bq27510g1_regs bq27500_regs
+#define bq27510g2_regs bq27500_regs
+	bq27510g3_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = 0x1a,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x1e,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x20,
+		[BQ27XXX_REG_DCAP] = 0x2e,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27520g1_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27520g2_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x36,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27520g3_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x36,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = 0x26,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27520g4_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x1e,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x20,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27521_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x02,
+		[BQ27XXX_REG_TEMP] = 0x0a,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x0c,
+		[BQ27XXX_REG_AI] = 0x0e,
+		[BQ27XXX_REG_FLAGS] = 0x08,
+		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
+	bq27530_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x32,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+#define bq27531_regs bq27530_regs
+	bq27541_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+#define bq27542_regs bq27541_regs
+#define bq27546_regs bq27541_regs
+#define bq27742_regs bq27541_regs
+	bq27545_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x0c,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = 0x24,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq27421_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x02,
+		[BQ27XXX_REG_INT_TEMP] = 0x1e,
+		[BQ27XXX_REG_VOLT] = 0x04,
+		[BQ27XXX_REG_AI] = 0x10,
+		[BQ27XXX_REG_FLAGS] = 0x06,
+		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = 0x08,
+		[BQ27XXX_REG_RC] = 0x0c,
+		[BQ27XXX_REG_FCC] = 0x0e,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x1c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x18,
+		BQ27XXX_DM_REG_ROWS,
+	},
+#define bq27411_regs bq27421_regs
+#define bq27425_regs bq27421_regs
+#define bq27426_regs bq27421_regs
+#define bq27441_regs bq27421_regs
+#define bq27621_regs bq27421_regs
+	bq27z561_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq28z610_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq34z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x0c,
+		[BQ27XXX_REG_INT_TEMP] = 0x2a,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x0a,
+		[BQ27XXX_REG_FLAGS] = 0x0e,
+		[BQ27XXX_REG_TTE] = 0x18,
+		[BQ27XXX_REG_TTF] = 0x1a,
+		[BQ27XXX_REG_TTES] = 0x1e,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = 0x04,
+		[BQ27XXX_REG_FCC] = 0x06,
+		[BQ27XXX_REG_CYCT] = 0x2c,
+		[BQ27XXX_REG_AE] = 0x24,
+		[BQ27XXX_REG_SOC] = 0x02,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	},
+	bq78z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
+	};
+
+static enum power_supply_property bq27000_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27010_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+#define bq2750x_props bq27510g3_props
+#define bq2751x_props bq27510g3_props
+#define bq2752x_props bq27510g3_props
+
+static enum power_supply_property bq27500_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27510g1_props bq27500_props
+#define bq27510g2_props bq27500_props
+
+static enum power_supply_property bq27510g3_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g1_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+#define bq27520g2_props bq27500_props
+
+static enum power_supply_property bq27520g3_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g4_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27521_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static enum power_supply_property bq27530_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27531_props bq27530_props
+
+static enum power_supply_property bq27541_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27542_props bq27541_props
+#define bq27546_props bq27541_props
+#define bq27742_props bq27541_props
+
+static enum power_supply_property bq27545_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27421_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27411_props bq27421_props
+#define bq27425_props bq27421_props
+#define bq27426_props bq27421_props
+#define bq27441_props bq27421_props
+#define bq27621_props bq27421_props
+
+static enum power_supply_property bq27z561_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq28z610_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq34z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq78z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+struct bq27xxx_dm_reg {
+	u8 subclass_id;
+	u8 offset;
+	u8 bytes;
+	u16 min, max;
+};
+
+enum bq27xxx_dm_reg_id {
+	BQ27XXX_DM_DESIGN_CAPACITY = 0,
+	BQ27XXX_DM_DESIGN_ENERGY,
+	BQ27XXX_DM_TERMINATE_VOLTAGE,
+};
+
+#define bq27000_dm_regs NULL
+#define bq27010_dm_regs NULL
+#define bq2750x_dm_regs NULL
+#define bq2751x_dm_regs NULL
+#define bq2752x_dm_regs NULL
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 48, 10, 2,    0, 65535 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { }, /* missing on chip */
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 48, 2, 1000, 32767 },
+};
+#else
+#define bq27500_dm_regs NULL
+#endif
+
+/* todo create data memory definitions from datasheets and test on chips */
+#define bq27510g1_dm_regs NULL
+#define bq27510g2_dm_regs NULL
+#define bq27510g3_dm_regs NULL
+#define bq27520g1_dm_regs NULL
+#define bq27520g2_dm_regs NULL
+#define bq27520g3_dm_regs NULL
+#define bq27520g4_dm_regs NULL
+#define bq27521_dm_regs NULL
+#define bq27530_dm_regs NULL
+#define bq27531_dm_regs NULL
+#define bq27541_dm_regs NULL
+#define bq27542_dm_regs NULL
+#define bq27546_dm_regs NULL
+#define bq27742_dm_regs NULL
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27545_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 48, 23, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 48, 25, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 67, 2, 2800,  3700 },
+};
+#else
+#define bq27545_dm_regs NULL
+#endif
+
+static struct bq27xxx_dm_reg bq27411_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 10, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2800,  3700 },
+};
+
+static struct bq27xxx_dm_reg bq27421_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 10, 2,    0,  8000 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2500,  3700 },
+};
+
+static struct bq27xxx_dm_reg bq27425_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 12, 2,    0, 32767 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 14, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 18, 2, 2800,  3700 },
+};
+
+static struct bq27xxx_dm_reg bq27426_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82,  6, 2,    0,  8000 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82,  8, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 10, 2, 2500,  3700 },
+};
+
+#if 0 /* not yet tested */
+#define bq27441_dm_regs bq27421_dm_regs
+#else
+#define bq27441_dm_regs NULL
+#endif
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY]   = { 82, 3, 2,    0,  8000 },
+	[BQ27XXX_DM_DESIGN_ENERGY]     = { 82, 5, 2,    0, 32767 },
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 9, 2, 2500,  3700 },
+};
+#else
+#define bq27621_dm_regs NULL
+#endif
+
+#define bq27z561_dm_regs NULL
+#define bq28z610_dm_regs NULL
+#define bq34z100_dm_regs NULL
+#define bq78z100_dm_regs NULL
+
+#define BQ27XXX_O_ZERO		BIT(0)
+#define BQ27XXX_O_OTDC		BIT(1) /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT		BIT(2) /* has OT overtemperature flag */
+#define BQ27XXX_O_CFGUP		BIT(3)
+#define BQ27XXX_O_RAM		BIT(4)
+#define BQ27Z561_O_BITS		BIT(5)
+#define BQ27XXX_O_SOC_SI	BIT(6) /* SoC is single register */
+#define BQ27XXX_O_HAS_CI	BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM	BIT(8) /* multiple chemistries supported */
+
+#define BQ27XXX_DATA(ref, key, opt) {		\
+	.opts = (opt),				\
+	.unseal_key = key,			\
+	.regs  = ref##_regs,			\
+	.dm_regs = ref##_dm_regs,		\
+	.props = ref##_props,			\
+	.props_size = ARRAY_SIZE(ref##_props) }
+
+static struct {
+	u32 opts;
+	u32 unseal_key;
+	u8 *regs;
+	struct bq27xxx_dm_reg *dm_regs;
+	enum power_supply_property *props;
+	size_t props_size;
+} bq27xxx_chip_data[] = {
+	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+	[BQ2750X]   = BQ27XXX_DATA(bq2750x,   0         , BQ27XXX_O_OTDC),
+	[BQ2751X]   = BQ27XXX_DATA(bq2751x,   0         , BQ27XXX_O_OTDC),
+	[BQ2752X]   = BQ27XXX_DATA(bq2752x,   0         , BQ27XXX_O_OTDC),
+	[BQ27500]   = BQ27XXX_DATA(bq27500,   0x04143672, BQ27XXX_O_OTDC),
+	[BQ27510G1] = BQ27XXX_DATA(bq27510g1, 0         , BQ27XXX_O_OTDC),
+	[BQ27510G2] = BQ27XXX_DATA(bq27510g2, 0         , BQ27XXX_O_OTDC),
+	[BQ27510G3] = BQ27XXX_DATA(bq27510g3, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G1] = BQ27XXX_DATA(bq27520g1, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
+	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
+	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
+	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
+	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
+	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
+	[BQ27542]   = BQ27XXX_DATA(bq27542,   0         , BQ27XXX_O_OTDC),
+	[BQ27546]   = BQ27XXX_DATA(bq27546,   0         , BQ27XXX_O_OTDC),
+	[BQ27742]   = BQ27XXX_DATA(bq27742,   0         , BQ27XXX_O_OTDC),
+	[BQ27545]   = BQ27XXX_DATA(bq27545,   0x04143672, BQ27XXX_O_OTDC),
+	[BQ27411]   = BQ27XXX_DATA(bq27411,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27421]   = BQ27XXX_DATA(bq27421,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27425]   = BQ27XXX_DATA(bq27425,   0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP),
+	[BQ27426]   = BQ27XXX_DATA(bq27426,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27441]   = BQ27XXX_DATA(bq27441,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
+	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
+	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
+	[BQ78Z100]  = BQ27XXX_DATA(bq78z100,  0         , BQ27Z561_O_BITS),
+};
+
+static DEFINE_MUTEX(bq27xxx_list_lock);
+static LIST_HEAD(bq27xxx_battery_devices);
+
+#define BQ27XXX_MSLEEP(i) usleep_range((i)*1000, (i)*1000+500)
+
+#define BQ27XXX_DM_SZ	32
+
+/**
+ * struct bq27xxx_dm_buf - chip data memory buffer
+ * @class: data memory subclass_id
+ * @block: data memory block number
+ * @data: data from/for the block
+ * @has_data: true if data has been filled by read
+ * @dirty: true if data has changed since last read/write
+ *
+ * Encapsulates info required to manage chip data memory blocks.
+ */
+struct bq27xxx_dm_buf {
+	u8 class;
+	u8 block;
+	u8 data[BQ27XXX_DM_SZ];
+	bool has_data, dirty;
+};
+
+#define BQ27XXX_DM_BUF(di, i) { \
+	.class = (di)->dm_regs[i].subclass_id, \
+	.block = (di)->dm_regs[i].offset / BQ27XXX_DM_SZ, \
+}
+
+static inline __be16 *bq27xxx_dm_reg_ptr(struct bq27xxx_dm_buf *buf,
+				      struct bq27xxx_dm_reg *reg)
+{
+	if (buf->class == reg->subclass_id &&
+	    buf->block == reg->offset / BQ27XXX_DM_SZ)
+		return (__be16 *) (buf->data + reg->offset % BQ27XXX_DM_SZ);
+
+	return NULL;
+}
+
+static const char * const bq27xxx_dm_reg_name[] = {
+	[BQ27XXX_DM_DESIGN_CAPACITY] = "design-capacity",
+	[BQ27XXX_DM_DESIGN_ENERGY] = "design-energy",
+	[BQ27XXX_DM_TERMINATE_VOLTAGE] = "terminate-voltage",
+};
+
+
+static bool bq27xxx_dt_to_nvm = true;
+module_param_named(dt_monitored_battery_updates_nvm, bq27xxx_dt_to_nvm, bool, 0444);
+MODULE_PARM_DESC(dt_monitored_battery_updates_nvm,
+	"Devicetree monitored-battery config updates data memory on NVM/flash chips.\n"
+	"Users must set this =0 when installing a different type of battery!\n"
+	"Default is =1."
+#ifndef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+	"\nSetting this affects future kernel updates, not the current configuration."
+#endif
+);
+
+static int poll_interval_param_set(const char *val, const struct kernel_param *kp)
+{
+	struct bq27xxx_device_info *di;
+	unsigned int prev_val = *(unsigned int *) kp->arg;
+	int ret;
+
+	ret = param_set_uint(val, kp);
+	if (ret < 0 || prev_val == *(unsigned int *) kp->arg)
+		return ret;
+
+	mutex_lock(&bq27xxx_list_lock);
+	list_for_each_entry(di, &bq27xxx_battery_devices, list)
+		mod_delayed_work(system_wq, &di->work, 0);
+	mutex_unlock(&bq27xxx_list_lock);
+
+	return ret;
+}
+
+static const struct kernel_param_ops param_ops_poll_interval = {
+	.get = param_get_uint,
+	.set = poll_interval_param_set,
+};
+
+static unsigned int poll_interval = 360;
+module_param_cb(poll_interval, &param_ops_poll_interval, &poll_interval, 0644);
+MODULE_PARM_DESC(poll_interval,
+		 "battery poll interval in seconds - 0 disables polling");
+
+/*
+ * Common code for BQ27xxx devices
+ */
+
+static inline int bq27xxx_read(struct bq27xxx_device_info *di, int reg_index,
+			       bool single)
+{
+	int ret;
+
+	if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+		return -EINVAL;
+
+	ret = di->bus.read(di, di->regs[reg_index], single);
+	if (ret < 0)
+		dev_dbg(di->dev, "failed to read register 0x%02x (index %d)\n",
+			di->regs[reg_index], reg_index);
+
+	return ret;
+}
+
+static inline int bq27xxx_write(struct bq27xxx_device_info *di, int reg_index,
+				u16 value, bool single)
+{
+	int ret;
+
+	if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+		return -EINVAL;
+
+	if (!di->bus.write)
+		return -EPERM;
+
+	ret = di->bus.write(di, di->regs[reg_index], value, single);
+	if (ret < 0)
+		dev_dbg(di->dev, "failed to write register 0x%02x (index %d)\n",
+			di->regs[reg_index], reg_index);
+
+	return ret;
+}
+
+static inline int bq27xxx_read_block(struct bq27xxx_device_info *di, int reg_index,
+				     u8 *data, int len)
+{
+	int ret;
+
+	if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+		return -EINVAL;
+
+	if (!di->bus.read_bulk)
+		return -EPERM;
+
+	ret = di->bus.read_bulk(di, di->regs[reg_index], data, len);
+	if (ret < 0)
+		dev_dbg(di->dev, "failed to read_bulk register 0x%02x (index %d)\n",
+			di->regs[reg_index], reg_index);
+
+	return ret;
+}
+
+static inline int bq27xxx_write_block(struct bq27xxx_device_info *di, int reg_index,
+				      u8 *data, int len)
+{
+	int ret;
+
+	if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+		return -EINVAL;
+
+	if (!di->bus.write_bulk)
+		return -EPERM;
+
+	ret = di->bus.write_bulk(di, di->regs[reg_index], data, len);
+	if (ret < 0)
+		dev_dbg(di->dev, "failed to write_bulk register 0x%02x (index %d)\n",
+			di->regs[reg_index], reg_index);
+
+	return ret;
+}
+
+static int bq27xxx_battery_seal(struct bq27xxx_device_info *di)
+{
+	int ret;
+
+	ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_SEALED, false);
+	if (ret < 0) {
+		dev_err(di->dev, "bus error on seal: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bq27xxx_battery_unseal(struct bq27xxx_device_info *di)
+{
+	int ret;
+
+	if (di->unseal_key == 0) {
+		dev_err(di->dev, "unseal failed due to missing key\n");
+		return -EINVAL;
+	}
+
+	ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, (u16)(di->unseal_key >> 16), false);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, (u16)di->unseal_key, false);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	dev_err(di->dev, "bus error on unseal: %d\n", ret);
+	return ret;
+}
+
+static u8 bq27xxx_battery_checksum_dm_block(struct bq27xxx_dm_buf *buf)
+{
+	u16 sum = 0;
+	int i;
+
+	for (i = 0; i < BQ27XXX_DM_SZ; i++)
+		sum += buf->data[i];
+	sum &= 0xff;
+
+	return 0xff - sum;
+}
+
+static int bq27xxx_battery_read_dm_block(struct bq27xxx_device_info *di,
+					 struct bq27xxx_dm_buf *buf)
+{
+	int ret;
+
+	buf->has_data = false;
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_CLASS, buf->class, true);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_BLOCK, buf->block, true);
+	if (ret < 0)
+		goto out;
+
+	BQ27XXX_MSLEEP(1);
+
+	ret = bq27xxx_read_block(di, BQ27XXX_DM_DATA, buf->data, BQ27XXX_DM_SZ);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_read(di, BQ27XXX_DM_CKSUM, true);
+	if (ret < 0)
+		goto out;
+
+	if ((u8)ret != bq27xxx_battery_checksum_dm_block(buf)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	buf->has_data = true;
+	buf->dirty = false;
+
+	return 0;
+
+out:
+	dev_err(di->dev, "bus error reading chip memory: %d\n", ret);
+	return ret;
+}
+
+static void bq27xxx_battery_update_dm_block(struct bq27xxx_device_info *di,
+					    struct bq27xxx_dm_buf *buf,
+					    enum bq27xxx_dm_reg_id reg_id,
+					    unsigned int val)
+{
+	struct bq27xxx_dm_reg *reg = &di->dm_regs[reg_id];
+	const char *str = bq27xxx_dm_reg_name[reg_id];
+	__be16 *prev = bq27xxx_dm_reg_ptr(buf, reg);
+
+	if (prev == NULL) {
+		dev_warn(di->dev, "buffer does not match %s dm spec\n", str);
+		return;
+	}
+
+	if (reg->bytes != 2) {
+		dev_warn(di->dev, "%s dm spec has unsupported byte size\n", str);
+		return;
+	}
+
+	if (!buf->has_data)
+		return;
+
+	if (be16_to_cpup(prev) == val) {
+		dev_info(di->dev, "%s has %u\n", str, val);
+		return;
+	}
+
+#ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+	if (!(di->opts & BQ27XXX_O_RAM) && !bq27xxx_dt_to_nvm) {
+#else
+	if (!(di->opts & BQ27XXX_O_RAM)) {
+#endif
+		/* devicetree and NVM differ; defer to NVM */
+		dev_warn(di->dev, "%s has %u; update to %u disallowed "
+#ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+			 "by dt_monitored_battery_updates_nvm=0"
+#else
+			 "for flash/NVM data memory"
+#endif
+			 "\n", str, be16_to_cpup(prev), val);
+		return;
+	}
+
+	dev_info(di->dev, "update %s to %u\n", str, val);
+
+	*prev = cpu_to_be16(val);
+	buf->dirty = true;
+}
+
+static int bq27xxx_battery_cfgupdate_priv(struct bq27xxx_device_info *di, bool active)
+{
+	const int limit = 100;
+	u16 cmd = active ? BQ27XXX_SET_CFGUPDATE : BQ27XXX_SOFT_RESET;
+	int ret, try = limit;
+
+	ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, cmd, false);
+	if (ret < 0)
+		return ret;
+
+	do {
+		BQ27XXX_MSLEEP(25);
+		ret = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
+		if (ret < 0)
+			return ret;
+	} while (!!(ret & BQ27XXX_FLAG_CFGUP) != active && --try);
+
+	if (!try && di->chip != BQ27425) { // 425 has a bug
+		dev_err(di->dev, "timed out waiting for cfgupdate flag %d\n", active);
+		return -EINVAL;
+	}
+
+	if (limit - try > 3)
+		dev_warn(di->dev, "cfgupdate %d, retries %d\n", active, limit - try);
+
+	return 0;
+}
+
+static inline int bq27xxx_battery_set_cfgupdate(struct bq27xxx_device_info *di)
+{
+	int ret = bq27xxx_battery_cfgupdate_priv(di, true);
+	if (ret < 0 && ret != -EINVAL)
+		dev_err(di->dev, "bus error on set_cfgupdate: %d\n", ret);
+
+	return ret;
+}
+
+static inline int bq27xxx_battery_soft_reset(struct bq27xxx_device_info *di)
+{
+	int ret = bq27xxx_battery_cfgupdate_priv(di, false);
+	if (ret < 0 && ret != -EINVAL)
+		dev_err(di->dev, "bus error on soft_reset: %d\n", ret);
+
+	return ret;
+}
+
+static int bq27xxx_battery_write_dm_block(struct bq27xxx_device_info *di,
+					  struct bq27xxx_dm_buf *buf)
+{
+	bool cfgup = di->opts & BQ27XXX_O_CFGUP;
+	int ret;
+
+	if (!buf->dirty)
+		return 0;
+
+	if (cfgup) {
+		ret = bq27xxx_battery_set_cfgupdate(di);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_CTRL, 0, true);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_CLASS, buf->class, true);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_BLOCK, buf->block, true);
+	if (ret < 0)
+		goto out;
+
+	BQ27XXX_MSLEEP(1);
+
+	ret = bq27xxx_write_block(di, BQ27XXX_DM_DATA, buf->data, BQ27XXX_DM_SZ);
+	if (ret < 0)
+		goto out;
+
+	ret = bq27xxx_write(di, BQ27XXX_DM_CKSUM,
+			    bq27xxx_battery_checksum_dm_block(buf), true);
+	if (ret < 0)
+		goto out;
+
+	/* DO NOT read BQ27XXX_DM_CKSUM here to verify it! That may cause NVM
+	 * corruption on the '425 chip (and perhaps others), which can damage
+	 * the chip.
+	 */
+
+	if (cfgup) {
+		BQ27XXX_MSLEEP(1);
+		ret = bq27xxx_battery_soft_reset(di);
+		if (ret < 0)
+			return ret;
+	} else {
+		BQ27XXX_MSLEEP(100); /* flash DM updates in <100ms */
+	}
+
+	buf->dirty = false;
+
+	return 0;
+
+out:
+	if (cfgup)
+		bq27xxx_battery_soft_reset(di);
+
+	dev_err(di->dev, "bus error writing chip memory: %d\n", ret);
+	return ret;
+}
+
+static void bq27xxx_battery_set_config(struct bq27xxx_device_info *di,
+				       struct power_supply_battery_info *info)
+{
+	struct bq27xxx_dm_buf bd = BQ27XXX_DM_BUF(di, BQ27XXX_DM_DESIGN_CAPACITY);
+	struct bq27xxx_dm_buf bt = BQ27XXX_DM_BUF(di, BQ27XXX_DM_TERMINATE_VOLTAGE);
+	bool updated;
+
+	if (bq27xxx_battery_unseal(di) < 0)
+		return;
+
+	if (info->charge_full_design_uah != -EINVAL &&
+	    info->energy_full_design_uwh != -EINVAL) {
+		bq27xxx_battery_read_dm_block(di, &bd);
+		/* assume design energy & capacity are in same block */
+		bq27xxx_battery_update_dm_block(di, &bd,
+					BQ27XXX_DM_DESIGN_CAPACITY,
+					info->charge_full_design_uah / 1000);
+		bq27xxx_battery_update_dm_block(di, &bd,
+					BQ27XXX_DM_DESIGN_ENERGY,
+					info->energy_full_design_uwh / 1000);
+	}
+
+	if (info->voltage_min_design_uv != -EINVAL) {
+		bool same = bd.class == bt.class && bd.block == bt.block;
+		if (!same)
+			bq27xxx_battery_read_dm_block(di, &bt);
+		bq27xxx_battery_update_dm_block(di, same ? &bd : &bt,
+					BQ27XXX_DM_TERMINATE_VOLTAGE,
+					info->voltage_min_design_uv / 1000);
+	}
+
+	updated = bd.dirty || bt.dirty;
+
+	bq27xxx_battery_write_dm_block(di, &bd);
+	bq27xxx_battery_write_dm_block(di, &bt);
+
+	bq27xxx_battery_seal(di);
+
+	if (updated && !(di->opts & BQ27XXX_O_CFGUP)) {
+		bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_RESET, false);
+		BQ27XXX_MSLEEP(300); /* reset time is not documented */
+	}
+	/* assume bq27xxx_battery_update() is called hereafter */
+}
+
+static void bq27xxx_battery_settings(struct bq27xxx_device_info *di)
+{
+	struct power_supply_battery_info *info;
+	unsigned int min, max;
+
+	if (power_supply_get_battery_info(di->bat, &info) < 0)
+		return;
+
+	if (!di->dm_regs) {
+		dev_warn(di->dev, "data memory update not supported for chip\n");
+		return;
+	}
+
+	if (info->energy_full_design_uwh != info->charge_full_design_uah) {
+		if (info->energy_full_design_uwh == -EINVAL)
+			dev_warn(di->dev, "missing battery:energy-full-design-microwatt-hours\n");
+		else if (info->charge_full_design_uah == -EINVAL)
+			dev_warn(di->dev, "missing battery:charge-full-design-microamp-hours\n");
+	}
+
+	/* assume min == 0 */
+	max = di->dm_regs[BQ27XXX_DM_DESIGN_ENERGY].max;
+	if (info->energy_full_design_uwh > max * 1000) {
+		dev_err(di->dev, "invalid battery:energy-full-design-microwatt-hours %d\n",
+			info->energy_full_design_uwh);
+		info->energy_full_design_uwh = -EINVAL;
+	}
+
+	/* assume min == 0 */
+	max = di->dm_regs[BQ27XXX_DM_DESIGN_CAPACITY].max;
+	if (info->charge_full_design_uah > max * 1000) {
+		dev_err(di->dev, "invalid battery:charge-full-design-microamp-hours %d\n",
+			info->charge_full_design_uah);
+		info->charge_full_design_uah = -EINVAL;
+	}
+
+	min = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].min;
+	max = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].max;
+	if ((info->voltage_min_design_uv < min * 1000 ||
+	     info->voltage_min_design_uv > max * 1000) &&
+	     info->voltage_min_design_uv != -EINVAL) {
+		dev_err(di->dev, "invalid battery:voltage-min-design-microvolt %d\n",
+			info->voltage_min_design_uv);
+		info->voltage_min_design_uv = -EINVAL;
+	}
+
+	if ((info->energy_full_design_uwh != -EINVAL &&
+	     info->charge_full_design_uah != -EINVAL) ||
+	     info->voltage_min_design_uv  != -EINVAL)
+		bq27xxx_battery_set_config(di, info);
+}
+
+/*
+ * Return the battery State-of-Charge
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
+{
+	int soc;
+
+	if (di->opts & BQ27XXX_O_SOC_SI)
+		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
+	else
+		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
+
+	if (soc < 0)
+		dev_dbg(di->dev, "error reading State-of-Charge\n");
+
+	return soc;
+}
+
+/*
+ * Return a battery charge value in µAh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
+{
+	int charge;
+
+	charge = bq27xxx_read(di, reg, false);
+	if (charge < 0) {
+		dev_dbg(di->dev, "error reading charge register %02x: %d\n",
+			reg, charge);
+		return charge;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		charge *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+	else
+		charge *= 1000;
+
+	return charge;
+}
+
+/*
+ * Return the battery Nominal available capacity in µAh
+ * Or < 0 if something fails.
+ */
+static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
+{
+	return bq27xxx_battery_read_charge(di, BQ27XXX_REG_NAC);
+}
+
+/*
+ * Return the battery Remaining Capacity in µAh
+ * Or < 0 if something fails.
+ */
+static inline int bq27xxx_battery_read_rc(struct bq27xxx_device_info *di)
+{
+	return bq27xxx_battery_read_charge(di, BQ27XXX_REG_RC);
+}
+
+/*
+ * Return the battery Full Charge Capacity in µAh
+ * Or < 0 if something fails.
+ */
+static inline int bq27xxx_battery_read_fcc(struct bq27xxx_device_info *di)
+{
+	return bq27xxx_battery_read_charge(di, BQ27XXX_REG_FCC);
+}
+
+/*
+ * Return the Design Capacity in µAh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
+{
+	int dcap;
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, true);
+	else
+		dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false);
+
+	if (dcap < 0) {
+		dev_dbg(di->dev, "error reading initial last measured discharge\n");
+		return dcap;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		dcap = (dcap << 8) * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+	else
+		dcap *= 1000;
+
+	return dcap;
+}
+
+/*
+ * Return the battery Available energy in µWh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_energy(struct bq27xxx_device_info *di)
+{
+	int ae;
+
+	ae = bq27xxx_read(di, BQ27XXX_REG_AE, false);
+	if (ae < 0) {
+		dev_dbg(di->dev, "error reading available energy\n");
+		return ae;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		ae *= BQ27XXX_POWER_CONSTANT / BQ27XXX_RS;
+	else
+		ae *= 1000;
+
+	return ae;
+}
+
+/*
+ * Return the battery temperature in tenths of degree Kelvin
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_temperature(struct bq27xxx_device_info *di)
+{
+	int temp;
+
+	temp = bq27xxx_read(di, BQ27XXX_REG_TEMP, false);
+	if (temp < 0) {
+		dev_err(di->dev, "error reading temperature\n");
+		return temp;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		temp = 5 * temp / 2;
+
+	return temp;
+}
+
+/*
+ * Return the battery Cycle count total
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_cyct(struct bq27xxx_device_info *di)
+{
+	int cyct;
+
+	cyct = bq27xxx_read(di, BQ27XXX_REG_CYCT, false);
+	if (cyct < 0)
+		dev_err(di->dev, "error reading cycle count total\n");
+
+	return cyct;
+}
+
+/*
+ * Read a time register.
+ * Return < 0 if something fails.
+ */
+static int bq27xxx_battery_read_time(struct bq27xxx_device_info *di, u8 reg)
+{
+	int tval;
+
+	tval = bq27xxx_read(di, reg, false);
+	if (tval < 0) {
+		dev_dbg(di->dev, "error reading time register %02x: %d\n",
+			reg, tval);
+		return tval;
+	}
+
+	if (tval == 65535)
+		return -ENODATA;
+
+	return tval * 60;
+}
+
+/*
+ * Returns true if a battery over temperature condition is detected
+ */
+static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
+{
+	if (di->opts & BQ27XXX_O_OTDC)
+		return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
+        if (di->opts & BQ27XXX_O_UTOT)
+		return flags & BQ27XXX_FLAG_OT;
+
+	return false;
+}
+
+/*
+ * Returns true if a battery under temperature condition is detected
+ */
+static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
+{
+	if (di->opts & BQ27XXX_O_UTOT)
+		return flags & BQ27XXX_FLAG_UT;
+
+	return false;
+}
+
+/*
+ * Returns true if a low state of charge condition is detected
+ */
+static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
+{
+	if (di->opts & BQ27XXX_O_ZERO)
+		return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF);
+	else if (di->opts & BQ27Z561_O_BITS)
+		return flags & BQ27Z561_FLAG_FDC;
+	else
+		return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
+}
+
+/*
+ * Returns true if reported battery capacity is inaccurate
+ */
+static bool bq27xxx_battery_capacity_inaccurate(struct bq27xxx_device_info *di,
+						 u16 flags)
+{
+	if (di->opts & BQ27XXX_O_HAS_CI)
+		return (flags & BQ27000_FLAG_CI);
+	else
+		return false;
+}
+
+static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
+{
+	/* Unlikely but important to return first */
+	if (unlikely(bq27xxx_battery_overtemp(di, di->cache.flags)))
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	if (unlikely(bq27xxx_battery_undertemp(di, di->cache.flags)))
+		return POWER_SUPPLY_HEALTH_COLD;
+	if (unlikely(bq27xxx_battery_dead(di, di->cache.flags)))
+		return POWER_SUPPLY_HEALTH_DEAD;
+	if (unlikely(bq27xxx_battery_capacity_inaccurate(di, di->cache.flags)))
+		return POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+
+	return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static bool bq27xxx_battery_is_full(struct bq27xxx_device_info *di, int flags)
+{
+	if (di->opts & BQ27XXX_O_ZERO)
+		return (flags & BQ27000_FLAG_FC);
+	else if (di->opts & BQ27Z561_O_BITS)
+		return (flags & BQ27Z561_FLAG_FC);
+	else
+		return (flags & BQ27XXX_FLAG_FC);
+}
+
+/*
+ * Return the battery average current in µA and the status
+ * Note that current can be negative signed as well
+ * Or 0 if something fails.
+ */
+static int bq27xxx_battery_current_and_status(
+	struct bq27xxx_device_info *di,
+	union power_supply_propval *val_curr,
+	union power_supply_propval *val_status,
+	struct bq27xxx_reg_cache *cache)
+{
+	bool single_flags = (di->opts & BQ27XXX_O_ZERO);
+	int curr;
+	int flags;
+
+	curr = bq27xxx_read(di, BQ27XXX_REG_AI, false);
+	if (curr < 0) {
+		dev_err(di->dev, "error reading current\n");
+		return curr;
+	}
+
+	if (cache) {
+		flags = cache->flags;
+	} else {
+		flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, single_flags);
+		if (flags < 0) {
+			dev_err(di->dev, "error reading flags\n");
+			return flags;
+		}
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO) {
+		if (!(flags & BQ27000_FLAG_CHGS)) {
+			dev_dbg(di->dev, "negative current!\n");
+			curr = -curr;
+		}
+
+		curr = curr * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+	} else {
+		/* Other gauges return signed value */
+		curr = (int)((s16)curr) * 1000;
+	}
+
+	if (val_curr)
+		val_curr->intval = curr;
+
+	if (val_status) {
+		if (curr > 0) {
+			val_status->intval = POWER_SUPPLY_STATUS_CHARGING;
+		} else if (curr < 0) {
+			val_status->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		} else {
+			if (bq27xxx_battery_is_full(di, flags))
+				val_status->intval = POWER_SUPPLY_STATUS_FULL;
+			else
+				val_status->intval =
+					POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+	}
+
+	return 0;
+}
+
+static void bq27xxx_battery_update_unlocked(struct bq27xxx_device_info *di)
+{
+	union power_supply_propval status = di->last_status;
+	struct bq27xxx_reg_cache cache = {0, };
+	bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
+
+	cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
+	if ((cache.flags & 0xff) == 0xff)
+		cache.flags = -1; /* read error */
+	if (cache.flags >= 0) {
+		cache.temperature = bq27xxx_battery_read_temperature(di);
+		if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
+			cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
+		if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
+			cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
+		if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
+			cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
+
+		cache.charge_full = bq27xxx_battery_read_fcc(di);
+		cache.capacity = bq27xxx_battery_read_soc(di);
+		if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
+			cache.energy = bq27xxx_battery_read_energy(di);
+		di->cache.flags = cache.flags;
+		cache.health = bq27xxx_battery_read_health(di);
+		if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR)
+			cache.cycle_count = bq27xxx_battery_read_cyct(di);
+
+		/*
+		 * On gauges with signed current reporting the current must be
+		 * checked to detect charging <-> discharging status changes.
+		 */
+		if (!(di->opts & BQ27XXX_O_ZERO))
+			bq27xxx_battery_current_and_status(di, NULL, &status, &cache);
+
+		/* We only have to read charge design full once */
+		if (di->charge_design_full <= 0)
+			di->charge_design_full = bq27xxx_battery_read_dcap(di);
+	}
+
+	if ((di->cache.capacity != cache.capacity) ||
+	    (di->cache.flags != cache.flags) ||
+	    (di->last_status.intval != status.intval)) {
+		di->last_status.intval = status.intval;
+		power_supply_changed(di->bat);
+	}
+
+	if (memcmp(&di->cache, &cache, sizeof(cache)) != 0)
+		di->cache = cache;
+
+	di->last_update = jiffies;
+
+	if (!di->removed && poll_interval > 0)
+		mod_delayed_work(system_wq, &di->work, poll_interval * HZ);
+}
+
+void bq27xxx_battery_update(struct bq27xxx_device_info *di)
+{
+	mutex_lock(&di->lock);
+	bq27xxx_battery_update_unlocked(di);
+	mutex_unlock(&di->lock);
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_update);
+
+static void bq27xxx_battery_poll(struct work_struct *work)
+{
+	struct bq27xxx_device_info *di =
+			container_of(work, struct bq27xxx_device_info,
+				     work.work);
+
+	bq27xxx_battery_update(di);
+}
+
+/*
+ * Get the average power in µW
+ * Return < 0 if something fails.
+ */
+static int bq27xxx_battery_pwr_avg(struct bq27xxx_device_info *di,
+				   union power_supply_propval *val)
+{
+	int power;
+
+	power = bq27xxx_read(di, BQ27XXX_REG_AP, false);
+	if (power < 0) {
+		dev_err(di->dev,
+			"error reading average power register %02x: %d\n",
+			BQ27XXX_REG_AP, power);
+		return power;
+	}
+
+	if (di->opts & BQ27XXX_O_ZERO)
+		val->intval = (power * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
+	else
+		/* Other gauges return a signed value in units of 10mW */
+		val->intval = (int)((s16)power) * 10000;
+
+	return 0;
+}
+
+static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
+					  union power_supply_propval *val)
+{
+	int level;
+
+	if (di->opts & BQ27XXX_O_ZERO) {
+		if (di->cache.flags & BQ27000_FLAG_FC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (di->cache.flags & BQ27000_FLAG_EDV1)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else if (di->cache.flags & BQ27000_FLAG_EDVF)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else
+			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	} else if (di->opts & BQ27Z561_O_BITS) {
+		if (di->cache.flags & BQ27Z561_FLAG_FC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (di->cache.flags & BQ27Z561_FLAG_FDC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else
+			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	} else {
+		if (di->cache.flags & BQ27XXX_FLAG_FC)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (di->cache.flags & BQ27XXX_FLAG_SOC1)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else if (di->cache.flags & BQ27XXX_FLAG_SOCF)
+			level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else
+			level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+	}
+
+	val->intval = level;
+
+	return 0;
+}
+
+/*
+ * Return the battery Voltage in millivolts
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_voltage(struct bq27xxx_device_info *di,
+				   union power_supply_propval *val)
+{
+	int volt;
+
+	volt = bq27xxx_read(di, BQ27XXX_REG_VOLT, false);
+	if (volt < 0) {
+		dev_err(di->dev, "error reading voltage\n");
+		return volt;
+	}
+
+	val->intval = volt * 1000;
+
+	return 0;
+}
+
+static int bq27xxx_simple_value(int value,
+				union power_supply_propval *val)
+{
+	if (value < 0)
+		return value;
+
+	val->intval = value;
+
+	return 0;
+}
+
+static int bq27xxx_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	int ret = 0;
+	struct bq27xxx_device_info *di = power_supply_get_drvdata(psy);
+
+	mutex_lock(&di->lock);
+	if (time_is_before_jiffies(di->last_update + 5 * HZ))
+		bq27xxx_battery_update_unlocked(di);
+	mutex_unlock(&di->lock);
+
+	if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq27xxx_battery_current_and_status(di, NULL, val, NULL);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = bq27xxx_battery_voltage(di, val);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = di->cache.flags < 0 ? 0 : 1;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = bq27xxx_battery_current_and_status(di, val, NULL, NULL);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = bq27xxx_simple_value(di->cache.capacity, val);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		ret = bq27xxx_battery_capacity_level(di, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = bq27xxx_simple_value(di->cache.temperature, val);
+		if (ret == 0)
+			val->intval -= 2731; /* convert decidegree k to c */
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		ret = bq27xxx_simple_value(di->cache.time_to_empty, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		ret = bq27xxx_simple_value(di->cache.time_to_empty_avg, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		ret = bq27xxx_simple_value(di->cache.time_to_full, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		if (di->opts & BQ27XXX_O_MUL_CHEM)
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		else
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		if (di->regs[BQ27XXX_REG_NAC] != INVALID_REG_ADDR)
+			ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val);
+		else
+			ret = bq27xxx_simple_value(bq27xxx_battery_read_rc(di), val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = bq27xxx_simple_value(di->cache.charge_full, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = bq27xxx_simple_value(di->charge_design_full, val);
+		break;
+	/*
+	 * TODO: Implement these to make registers set from
+	 * power_supply_battery_info visible in sysfs.
+	 */
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		return -EINVAL;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		ret = bq27xxx_simple_value(di->cache.cycle_count, val);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+		ret = bq27xxx_simple_value(di->cache.energy, val);
+		break;
+	case POWER_SUPPLY_PROP_POWER_AVG:
+		ret = bq27xxx_battery_pwr_avg(di, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq27xxx_simple_value(di->cache.health, val);
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ27XXX_MANUFACTURER;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void bq27xxx_external_power_changed(struct power_supply *psy)
+{
+	struct bq27xxx_device_info *di = power_supply_get_drvdata(psy);
+
+	/* After charger plug in/out wait 0.5s for things to stabilize */
+	mod_delayed_work(system_wq, &di->work, HZ / 2);
+}
+
+int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
+{
+	struct power_supply_desc *psy_desc;
+	struct power_supply_config psy_cfg = {
+		.of_node = di->dev->of_node,
+		.drv_data = di,
+	};
+
+	INIT_DELAYED_WORK(&di->work, bq27xxx_battery_poll);
+	mutex_init(&di->lock);
+
+	di->regs       = bq27xxx_chip_data[di->chip].regs;
+	di->unseal_key = bq27xxx_chip_data[di->chip].unseal_key;
+	di->dm_regs    = bq27xxx_chip_data[di->chip].dm_regs;
+	di->opts       = bq27xxx_chip_data[di->chip].opts;
+
+	psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL);
+	if (!psy_desc)
+		return -ENOMEM;
+
+	psy_desc->name = di->name;
+	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	psy_desc->properties = bq27xxx_chip_data[di->chip].props;
+	psy_desc->num_properties = bq27xxx_chip_data[di->chip].props_size;
+	psy_desc->get_property = bq27xxx_battery_get_property;
+	psy_desc->external_power_changed = bq27xxx_external_power_changed;
+
+	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
+	if (IS_ERR(di->bat))
+		return dev_err_probe(di->dev, PTR_ERR(di->bat),
+				     "failed to register battery\n");
+
+	bq27xxx_battery_settings(di);
+	bq27xxx_battery_update(di);
+
+	mutex_lock(&bq27xxx_list_lock);
+	list_add(&di->list, &bq27xxx_battery_devices);
+	mutex_unlock(&bq27xxx_list_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_setup);
+
+void bq27xxx_battery_teardown(struct bq27xxx_device_info *di)
+{
+	mutex_lock(&bq27xxx_list_lock);
+	list_del(&di->list);
+	mutex_unlock(&bq27xxx_list_lock);
+
+	/* Set removed to avoid bq27xxx_battery_update() re-queuing the work */
+	mutex_lock(&di->lock);
+	di->removed = true;
+	mutex_unlock(&di->lock);
+
+	cancel_delayed_work_sync(&di->work);
+
+	power_supply_unregister(di->bat);
+	mutex_destroy(&di->lock);
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("BQ27xxx battery monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq27xxx_battery_hdq.c b/drivers/power/supply/bq27xxx_battery_hdq.c
new file mode 100644
index 000000000..922759ab2
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery_hdq.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery monitor HDQ/1-wire driver
+ *
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power/bq27xxx_battery.h>
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000	0x01
+
+#define HDQ_CMD_READ	(0 << 7)
+#define HDQ_CMD_WRITE	(1 << 7)
+
+static int F_ID;
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ27xxx device");
+
+static int w1_bq27000_read(struct w1_slave *sl, unsigned int reg)
+{
+	u8 val;
+
+	mutex_lock(&sl->master->bus_mutex);
+	w1_write_8(sl->master, HDQ_CMD_READ | reg);
+	val = w1_read_8(sl->master);
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return val;
+}
+
+static int bq27xxx_battery_hdq_read(struct bq27xxx_device_info *di, u8 reg,
+				    bool single)
+{
+	struct w1_slave *sl = dev_to_w1_slave(di->dev);
+	unsigned int timeout = 3;
+	int upper, lower;
+	int temp;
+
+	if (!single) {
+		/*
+		 * Make sure the value has not changed in between reading the
+		 * lower and the upper part
+		 */
+		upper = w1_bq27000_read(sl, reg + 1);
+		do {
+			temp = upper;
+			if (upper < 0)
+				return upper;
+
+			lower = w1_bq27000_read(sl, reg);
+			if (lower < 0)
+				return lower;
+
+			upper = w1_bq27000_read(sl, reg + 1);
+		} while (temp != upper && --timeout);
+
+		if (timeout == 0)
+			return -EIO;
+
+		return (upper << 8) | lower;
+	}
+
+	return w1_bq27000_read(sl, reg);
+}
+
+static int bq27xxx_battery_hdq_add_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di;
+
+	di = devm_kzalloc(&sl->dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	dev_set_drvdata(&sl->dev, di);
+
+	di->dev = &sl->dev;
+	di->chip = BQ27000;
+	di->name = "bq27000-battery";
+	di->bus.read = bq27xxx_battery_hdq_read;
+
+	return bq27xxx_battery_setup(di);
+}
+
+static void bq27xxx_battery_hdq_remove_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di = dev_get_drvdata(&sl->dev);
+
+	bq27xxx_battery_teardown(di);
+}
+
+static const struct w1_family_ops bq27xxx_battery_hdq_fops = {
+	.add_slave	= bq27xxx_battery_hdq_add_slave,
+	.remove_slave	= bq27xxx_battery_hdq_remove_slave,
+};
+
+static struct w1_family bq27xxx_battery_hdq_family = {
+	.fid = W1_FAMILY_BQ27000,
+	.fops = &bq27xxx_battery_hdq_fops,
+};
+
+static int __init bq27xxx_battery_hdq_init(void)
+{
+	if (F_ID)
+		bq27xxx_battery_hdq_family.fid = F_ID;
+
+	return w1_register_family(&bq27xxx_battery_hdq_family);
+}
+module_init(bq27xxx_battery_hdq_init);
+
+static void __exit bq27xxx_battery_hdq_exit(void)
+{
+	w1_unregister_family(&bq27xxx_battery_hdq_family);
+}
+module_exit(bq27xxx_battery_hdq_exit);
+
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("BQ27xxx battery monitor HDQ/1-wire driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
new file mode 100644
index 000000000..0713a52a2
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery monitor I2C driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/power/bq27xxx_battery.h>
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_mutex);
+
+static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data)
+{
+	struct bq27xxx_device_info *di = data;
+
+	bq27xxx_battery_update(di);
+
+	return IRQ_HANDLED;
+}
+
+static int bq27xxx_battery_i2c_read(struct bq27xxx_device_info *di, u8 reg,
+				    bool single)
+{
+	struct i2c_client *client = to_i2c_client(di->dev);
+	struct i2c_msg msg[2];
+	u8 data[2];
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = &reg;
+	msg[0].len = sizeof(reg);
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = data;
+	if (single)
+		msg[1].len = 1;
+	else
+		msg[1].len = 2;
+
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (ret < 0)
+		return ret;
+
+	if (!single)
+		ret = get_unaligned_le16(data);
+	else
+		ret = data[0];
+
+	return ret;
+}
+
+static int bq27xxx_battery_i2c_write(struct bq27xxx_device_info *di, u8 reg,
+				     int value, bool single)
+{
+	struct i2c_client *client = to_i2c_client(di->dev);
+	struct i2c_msg msg;
+	u8 data[4];
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	data[0] = reg;
+	if (single) {
+		data[1] = (u8) value;
+		msg.len = 2;
+	} else {
+		put_unaligned_le16(value, &data[1]);
+		msg.len = 3;
+	}
+
+	msg.buf = data;
+	msg.addr = client->addr;
+	msg.flags = 0;
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		return ret;
+	if (ret != 1)
+		return -EINVAL;
+	return 0;
+}
+
+static int bq27xxx_battery_i2c_bulk_read(struct bq27xxx_device_info *di, u8 reg,
+					 u8 *data, int len)
+{
+	struct i2c_client *client = to_i2c_client(di->dev);
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, len, data);
+	if (ret < 0)
+		return ret;
+	if (ret != len)
+		return -EINVAL;
+	return 0;
+}
+
+static int bq27xxx_battery_i2c_bulk_write(struct bq27xxx_device_info *di,
+					  u8 reg, u8 *data, int len)
+{
+	struct i2c_client *client = to_i2c_client(di->dev);
+	struct i2c_msg msg;
+	u8 buf[33];
+	int ret;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	buf[0] = reg;
+	memcpy(&buf[1], data, len);
+
+	msg.buf = buf;
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.len = len + 1;
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		return ret;
+	if (ret != 1)
+		return -EINVAL;
+	return 0;
+}
+
+static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct bq27xxx_device_info *di;
+	int ret;
+	char *name;
+	int num;
+
+	/* Get new ID for the new battery device */
+	mutex_lock(&battery_mutex);
+	num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&battery_mutex);
+	if (num < 0)
+		return num;
+
+	name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num);
+	if (!name)
+		goto err_mem;
+
+	di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		goto err_mem;
+
+	di->id = num;
+	di->dev = &client->dev;
+	di->chip = id->driver_data;
+	di->name = name;
+
+	di->bus.read = bq27xxx_battery_i2c_read;
+	di->bus.write = bq27xxx_battery_i2c_write;
+	di->bus.read_bulk = bq27xxx_battery_i2c_bulk_read;
+	di->bus.write_bulk = bq27xxx_battery_i2c_bulk_write;
+
+	ret = bq27xxx_battery_setup(di);
+	if (ret)
+		goto err_failed;
+
+	/* Schedule a polling after about 1 min */
+	schedule_delayed_work(&di->work, 60 * HZ);
+
+	i2c_set_clientdata(client, di);
+
+	if (client->irq) {
+		ret = request_threaded_irq(client->irq,
+				NULL, bq27xxx_battery_irq_handler_thread,
+				IRQF_ONESHOT,
+				di->name, di);
+		if (ret) {
+			dev_err(&client->dev,
+				"Unable to register IRQ %d error %d\n",
+				client->irq, ret);
+			bq27xxx_battery_teardown(di);
+			goto err_failed;
+		}
+	}
+
+	return 0;
+
+err_mem:
+	ret = -ENOMEM;
+
+err_failed:
+	mutex_lock(&battery_mutex);
+	idr_remove(&battery_id, num);
+	mutex_unlock(&battery_mutex);
+
+	return ret;
+}
+
+static void bq27xxx_battery_i2c_remove(struct i2c_client *client)
+{
+	struct bq27xxx_device_info *di = i2c_get_clientdata(client);
+
+	free_irq(client->irq, di);
+	bq27xxx_battery_teardown(di);
+
+	mutex_lock(&battery_mutex);
+	idr_remove(&battery_id, di->id);
+	mutex_unlock(&battery_mutex);
+}
+
+static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
+	{ "bq27200", BQ27000 },
+	{ "bq27210", BQ27010 },
+	{ "bq27500", BQ2750X },
+	{ "bq27510", BQ2751X },
+	{ "bq27520", BQ2752X },
+	{ "bq27500-1", BQ27500 },
+	{ "bq27510g1", BQ27510G1 },
+	{ "bq27510g2", BQ27510G2 },
+	{ "bq27510g3", BQ27510G3 },
+	{ "bq27520g1", BQ27520G1 },
+	{ "bq27520g2", BQ27520G2 },
+	{ "bq27520g3", BQ27520G3 },
+	{ "bq27520g4", BQ27520G4 },
+	{ "bq27521", BQ27521 },
+	{ "bq27530", BQ27530 },
+	{ "bq27531", BQ27531 },
+	{ "bq27541", BQ27541 },
+	{ "bq27542", BQ27542 },
+	{ "bq27546", BQ27546 },
+	{ "bq27742", BQ27742 },
+	{ "bq27545", BQ27545 },
+	{ "bq27411", BQ27411 },
+	{ "bq27421", BQ27421 },
+	{ "bq27425", BQ27425 },
+	{ "bq27426", BQ27426 },
+	{ "bq27441", BQ27441 },
+	{ "bq27621", BQ27621 },
+	{ "bq27z561", BQ27Z561 },
+	{ "bq28z610", BQ28Z610 },
+	{ "bq34z100", BQ34Z100 },
+	{ "bq78z100", BQ78Z100 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
+	{ .compatible = "ti,bq27200" },
+	{ .compatible = "ti,bq27210" },
+	{ .compatible = "ti,bq27500" },
+	{ .compatible = "ti,bq27510" },
+	{ .compatible = "ti,bq27520" },
+	{ .compatible = "ti,bq27500-1" },
+	{ .compatible = "ti,bq27510g1" },
+	{ .compatible = "ti,bq27510g2" },
+	{ .compatible = "ti,bq27510g3" },
+	{ .compatible = "ti,bq27520g1" },
+	{ .compatible = "ti,bq27520g2" },
+	{ .compatible = "ti,bq27520g3" },
+	{ .compatible = "ti,bq27520g4" },
+	{ .compatible = "ti,bq27521" },
+	{ .compatible = "ti,bq27530" },
+	{ .compatible = "ti,bq27531" },
+	{ .compatible = "ti,bq27541" },
+	{ .compatible = "ti,bq27542" },
+	{ .compatible = "ti,bq27546" },
+	{ .compatible = "ti,bq27742" },
+	{ .compatible = "ti,bq27545" },
+	{ .compatible = "ti,bq27411" },
+	{ .compatible = "ti,bq27421" },
+	{ .compatible = "ti,bq27425" },
+	{ .compatible = "ti,bq27426" },
+	{ .compatible = "ti,bq27441" },
+	{ .compatible = "ti,bq27621" },
+	{ .compatible = "ti,bq27z561" },
+	{ .compatible = "ti,bq28z610" },
+	{ .compatible = "ti,bq34z100" },
+	{ .compatible = "ti,bq78z100" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
+#endif
+
+static struct i2c_driver bq27xxx_battery_i2c_driver = {
+	.driver = {
+		.name = "bq27xxx-battery",
+		.of_match_table = of_match_ptr(bq27xxx_battery_i2c_of_match_table),
+	},
+	.probe = bq27xxx_battery_i2c_probe,
+	.remove = bq27xxx_battery_i2c_remove,
+	.id_table = bq27xxx_i2c_id_table,
+};
+module_i2c_driver(bq27xxx_battery_i2c_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("BQ27xxx battery monitor i2c driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
new file mode 100644
index 000000000..92db79400
--- /dev/null
+++ b/drivers/power/supply/charger-manager.c
@@ -0,0 +1,1770 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This driver enables to monitor battery health and control charger
+ * during suspend-to-mem.
+ * Charger manager depends on other devices. Register this later than
+ * the depending devices.
+ *
+**/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power/charger-manager.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
+
+static struct {
+	const char *name;
+	u64 extcon_type;
+} extcon_mapping[] = {
+	/* Current textual representations */
+	{ "USB", EXTCON_USB },
+	{ "USB-HOST", EXTCON_USB_HOST },
+	{ "SDP", EXTCON_CHG_USB_SDP },
+	{ "DCP", EXTCON_CHG_USB_DCP },
+	{ "CDP", EXTCON_CHG_USB_CDP },
+	{ "ACA", EXTCON_CHG_USB_ACA },
+	{ "FAST-CHARGER", EXTCON_CHG_USB_FAST },
+	{ "SLOW-CHARGER", EXTCON_CHG_USB_SLOW },
+	{ "WPT", EXTCON_CHG_WPT },
+	{ "PD", EXTCON_CHG_USB_PD },
+	{ "DOCK", EXTCON_DOCK },
+	{ "JIG", EXTCON_JIG },
+	{ "MECHANICAL", EXTCON_MECHANICAL },
+	/* Deprecated textual representations */
+	{ "TA", EXTCON_CHG_USB_SDP },
+	{ "CHARGE-DOWNSTREAM", EXTCON_CHG_USB_CDP },
+};
+
+/*
+ * Default temperature threshold for charging.
+ * Every temperature units are in tenth of centigrade.
+ */
+#define CM_DEFAULT_RECHARGE_TEMP_DIFF	50
+#define CM_DEFAULT_CHARGE_TEMP_MAX	500
+
+/*
+ * Regard CM_JIFFIES_SMALL jiffies is small enough to ignore for
+ * delayed works so that we can run delayed works with CM_JIFFIES_SMALL
+ * without any delays.
+ */
+#define	CM_JIFFIES_SMALL	(2)
+
+/* If y is valid (> 0) and smaller than x, do x = y */
+#define CM_MIN_VALID(x, y)	x = (((y > 0) && ((x) > (y))) ? (y) : (x))
+
+/*
+ * Regard CM_RTC_SMALL (sec) is small enough to ignore error in invoking
+ * rtc alarm. It should be 2 or larger
+ */
+#define CM_RTC_SMALL		(2)
+
+static LIST_HEAD(cm_list);
+static DEFINE_MUTEX(cm_list_mtx);
+
+/* About in-suspend (suspend-again) monitoring */
+static struct alarm *cm_timer;
+
+static bool cm_suspended;
+static bool cm_timer_set;
+static unsigned long cm_suspend_duration_ms;
+
+/* About normal (not suspended) monitoring */
+static unsigned long polling_jiffy = ULONG_MAX; /* ULONG_MAX: no polling */
+static unsigned long next_polling; /* Next appointed polling time */
+static struct workqueue_struct *cm_wq; /* init at driver add */
+static struct delayed_work cm_monitor_work; /* init at driver add */
+
+/**
+ * is_batt_present - See if the battery presents in place.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_batt_present(struct charger_manager *cm)
+{
+	union power_supply_propval val;
+	struct power_supply *psy;
+	bool present = false;
+	int i, ret;
+
+	switch (cm->desc->battery_present) {
+	case CM_BATTERY_PRESENT:
+		present = true;
+		break;
+	case CM_NO_BATTERY:
+		break;
+	case CM_FUEL_GAUGE:
+		psy = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+		if (!psy)
+			break;
+
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT,
+				&val);
+		if (ret == 0 && val.intval)
+			present = true;
+		power_supply_put(psy);
+		break;
+	case CM_CHARGER_STAT:
+		for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+			psy = power_supply_get_by_name(
+					cm->desc->psy_charger_stat[i]);
+			if (!psy) {
+				dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+					cm->desc->psy_charger_stat[i]);
+				continue;
+			}
+
+			ret = power_supply_get_property(psy,
+				POWER_SUPPLY_PROP_PRESENT, &val);
+			power_supply_put(psy);
+			if (ret == 0 && val.intval) {
+				present = true;
+				break;
+			}
+		}
+		break;
+	}
+
+	return present;
+}
+
+/**
+ * is_ext_pwr_online - See if an external power source is attached to charge
+ * @cm: the Charger Manager representing the battery.
+ *
+ * Returns true if at least one of the chargers of the battery has an external
+ * power source attached to charge the battery regardless of whether it is
+ * actually charging or not.
+ */
+static bool is_ext_pwr_online(struct charger_manager *cm)
+{
+	union power_supply_propval val;
+	struct power_supply *psy;
+	bool online = false;
+	int i, ret;
+
+	/* If at least one of them has one, it's yes. */
+	for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+		psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+		if (!psy) {
+			dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+					cm->desc->psy_charger_stat[i]);
+			continue;
+		}
+
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+				&val);
+		power_supply_put(psy);
+		if (ret == 0 && val.intval) {
+			online = true;
+			break;
+		}
+	}
+
+	return online;
+}
+
+/**
+ * get_batt_uV - Get the voltage level of the battery
+ * @cm: the Charger Manager representing the battery.
+ * @uV: the voltage level returned.
+ *
+ * Returns 0 if there is no error.
+ * Returns a negative value on error.
+ */
+static int get_batt_uV(struct charger_manager *cm, int *uV)
+{
+	union power_supply_propval val;
+	struct power_supply *fuel_gauge;
+	int ret;
+
+	fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+	if (!fuel_gauge)
+		return -ENODEV;
+
+	ret = power_supply_get_property(fuel_gauge,
+				POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
+	power_supply_put(fuel_gauge);
+	if (ret)
+		return ret;
+
+	*uV = val.intval;
+	return 0;
+}
+
+/**
+ * is_charging - Returns true if the battery is being charged.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_charging(struct charger_manager *cm)
+{
+	int i, ret;
+	bool charging = false;
+	struct power_supply *psy;
+	union power_supply_propval val;
+
+	/* If there is no battery, it cannot be charged */
+	if (!is_batt_present(cm))
+		return false;
+
+	/* If at least one of the charger is charging, return yes */
+	for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+		/* 1. The charger sholuld not be DISABLED */
+		if (cm->emergency_stop)
+			continue;
+		if (!cm->charger_enabled)
+			continue;
+
+		psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+		if (!psy) {
+			dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+					cm->desc->psy_charger_stat[i]);
+			continue;
+		}
+
+		/* 2. The charger should be online (ext-power) */
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+				&val);
+		if (ret) {
+			dev_warn(cm->dev, "Cannot read ONLINE value from %s\n",
+				 cm->desc->psy_charger_stat[i]);
+			power_supply_put(psy);
+			continue;
+		}
+		if (val.intval == 0) {
+			power_supply_put(psy);
+			continue;
+		}
+
+		/*
+		 * 3. The charger should not be FULL, DISCHARGING,
+		 * or NOT_CHARGING.
+		 */
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS,
+				&val);
+		power_supply_put(psy);
+		if (ret) {
+			dev_warn(cm->dev, "Cannot read STATUS value from %s\n",
+				 cm->desc->psy_charger_stat[i]);
+			continue;
+		}
+		if (val.intval == POWER_SUPPLY_STATUS_FULL ||
+				val.intval == POWER_SUPPLY_STATUS_DISCHARGING ||
+				val.intval == POWER_SUPPLY_STATUS_NOT_CHARGING)
+			continue;
+
+		/* Then, this is charging. */
+		charging = true;
+		break;
+	}
+
+	return charging;
+}
+
+/**
+ * is_full_charged - Returns true if the battery is fully charged.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_full_charged(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	union power_supply_propval val;
+	struct power_supply *fuel_gauge;
+	bool is_full = false;
+	int ret = 0;
+	int uV;
+
+	/* If there is no battery, it cannot be charged */
+	if (!is_batt_present(cm))
+		return false;
+
+	fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+	if (!fuel_gauge)
+		return false;
+
+	/* Full, if it's over the fullbatt voltage */
+	if (desc->fullbatt_uV > 0) {
+		ret = get_batt_uV(cm, &uV);
+		if (!ret) {
+			/* Battery is already full, checks voltage drop. */
+			if (cm->battery_status == POWER_SUPPLY_STATUS_FULL
+					&& desc->fullbatt_vchkdrop_uV)
+				uV += desc->fullbatt_vchkdrop_uV;
+			if (uV >= desc->fullbatt_uV)
+				return true;
+		}
+	}
+
+	if (desc->fullbatt_full_capacity > 0) {
+		val.intval = 0;
+
+		/* Not full if capacity of fuel gauge isn't full */
+		ret = power_supply_get_property(fuel_gauge,
+				POWER_SUPPLY_PROP_CHARGE_FULL, &val);
+		if (!ret && val.intval > desc->fullbatt_full_capacity) {
+			is_full = true;
+			goto out;
+		}
+	}
+
+	/* Full, if the capacity is more than fullbatt_soc */
+	if (desc->fullbatt_soc > 0) {
+		val.intval = 0;
+
+		ret = power_supply_get_property(fuel_gauge,
+				POWER_SUPPLY_PROP_CAPACITY, &val);
+		if (!ret && val.intval >= desc->fullbatt_soc) {
+			is_full = true;
+			goto out;
+		}
+	}
+
+out:
+	power_supply_put(fuel_gauge);
+	return is_full;
+}
+
+/**
+ * is_polling_required - Return true if need to continue polling for this CM.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_polling_required(struct charger_manager *cm)
+{
+	switch (cm->desc->polling_mode) {
+	case CM_POLL_DISABLE:
+		return false;
+	case CM_POLL_ALWAYS:
+		return true;
+	case CM_POLL_EXTERNAL_POWER_ONLY:
+		return is_ext_pwr_online(cm);
+	case CM_POLL_CHARGING_ONLY:
+		return is_charging(cm);
+	default:
+		dev_warn(cm->dev, "Incorrect polling_mode (%d)\n",
+			 cm->desc->polling_mode);
+	}
+
+	return false;
+}
+
+/**
+ * try_charger_enable - Enable/Disable chargers altogether
+ * @cm: the Charger Manager representing the battery.
+ * @enable: true: enable / false: disable
+ *
+ * Note that Charger Manager keeps the charger enabled regardless whether
+ * the charger is charging or not (because battery is full or no external
+ * power source exists) except when CM needs to disable chargers forcibly
+ * because of emergency causes; when the battery is overheated or too cold.
+ */
+static int try_charger_enable(struct charger_manager *cm, bool enable)
+{
+	int err = 0, i;
+	struct charger_desc *desc = cm->desc;
+
+	/* Ignore if it's redundant command */
+	if (enable == cm->charger_enabled)
+		return 0;
+
+	if (enable) {
+		if (cm->emergency_stop)
+			return -EAGAIN;
+
+		/*
+		 * Save start time of charging to limit
+		 * maximum possible charging time.
+		 */
+		cm->charging_start_time = ktime_to_ms(ktime_get());
+		cm->charging_end_time = 0;
+
+		for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+			if (desc->charger_regulators[i].externally_control)
+				continue;
+
+			err = regulator_enable(desc->charger_regulators[i].consumer);
+			if (err < 0) {
+				dev_warn(cm->dev, "Cannot enable %s regulator\n",
+					 desc->charger_regulators[i].regulator_name);
+			}
+		}
+	} else {
+		/*
+		 * Save end time of charging to maintain fully charged state
+		 * of battery after full-batt.
+		 */
+		cm->charging_start_time = 0;
+		cm->charging_end_time = ktime_to_ms(ktime_get());
+
+		for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+			if (desc->charger_regulators[i].externally_control)
+				continue;
+
+			err = regulator_disable(desc->charger_regulators[i].consumer);
+			if (err < 0) {
+				dev_warn(cm->dev, "Cannot disable %s regulator\n",
+					 desc->charger_regulators[i].regulator_name);
+			}
+		}
+
+		/*
+		 * Abnormal battery state - Stop charging forcibly,
+		 * even if charger was enabled at the other places
+		 */
+		for (i = 0; i < desc->num_charger_regulators; i++) {
+			if (regulator_is_enabled(
+				    desc->charger_regulators[i].consumer)) {
+				regulator_force_disable(
+					desc->charger_regulators[i].consumer);
+				dev_warn(cm->dev, "Disable regulator(%s) forcibly\n",
+					 desc->charger_regulators[i].regulator_name);
+			}
+		}
+	}
+
+	if (!err)
+		cm->charger_enabled = enable;
+
+	return err;
+}
+
+/**
+ * check_charging_duration - Monitor charging/discharging duration
+ * @cm: the Charger Manager representing the battery.
+ *
+ * If whole charging duration exceed 'charging_max_duration_ms',
+ * cm stop charging to prevent overcharge/overheat. If discharging
+ * duration exceed 'discharging _max_duration_ms', charger cable is
+ * attached, after full-batt, cm start charging to maintain fully
+ * charged state for battery.
+ */
+static int check_charging_duration(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	u64 curr = ktime_to_ms(ktime_get());
+	u64 duration;
+	int ret = false;
+
+	if (!desc->charging_max_duration_ms &&
+			!desc->discharging_max_duration_ms)
+		return ret;
+
+	if (cm->charger_enabled) {
+		duration = curr - cm->charging_start_time;
+
+		if (duration > desc->charging_max_duration_ms) {
+			dev_info(cm->dev, "Charging duration exceed %ums\n",
+				 desc->charging_max_duration_ms);
+			ret = true;
+		}
+	} else if (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING) {
+		duration = curr - cm->charging_end_time;
+
+		if (duration > desc->discharging_max_duration_ms) {
+			dev_info(cm->dev, "Discharging duration exceed %ums\n",
+				 desc->discharging_max_duration_ms);
+			ret = true;
+		}
+	}
+
+	return ret;
+}
+
+static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
+					int *temp)
+{
+	struct power_supply *fuel_gauge;
+	int ret;
+
+	fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+	if (!fuel_gauge)
+		return -ENODEV;
+
+	ret = power_supply_get_property(fuel_gauge,
+				POWER_SUPPLY_PROP_TEMP,
+				(union power_supply_propval *)temp);
+	power_supply_put(fuel_gauge);
+
+	return ret;
+}
+
+static int cm_get_battery_temperature(struct charger_manager *cm,
+					int *temp)
+{
+	int ret;
+
+	if (!cm->desc->measure_battery_temp)
+		return -ENODEV;
+
+#ifdef CONFIG_THERMAL
+	if (cm->tzd_batt) {
+		ret = thermal_zone_get_temp(cm->tzd_batt, temp);
+		if (!ret)
+			/* Calibrate temperature unit */
+			*temp /= 100;
+	} else
+#endif
+	{
+		/* if-else continued from CONFIG_THERMAL */
+		ret = cm_get_battery_temperature_by_psy(cm, temp);
+	}
+
+	return ret;
+}
+
+static int cm_check_thermal_status(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	int temp, upper_limit, lower_limit;
+	int ret = 0;
+
+	ret = cm_get_battery_temperature(cm, &temp);
+	if (ret) {
+		/* FIXME:
+		 * No information of battery temperature might
+		 * occur hazardous result. We have to handle it
+		 * depending on battery type.
+		 */
+		dev_err(cm->dev, "Failed to get battery temperature\n");
+		return 0;
+	}
+
+	upper_limit = desc->temp_max;
+	lower_limit = desc->temp_min;
+
+	if (cm->emergency_stop) {
+		upper_limit -= desc->temp_diff;
+		lower_limit += desc->temp_diff;
+	}
+
+	if (temp > upper_limit)
+		ret = CM_BATT_OVERHEAT;
+	else if (temp < lower_limit)
+		ret = CM_BATT_COLD;
+	else
+		ret = CM_BATT_OK;
+
+	cm->emergency_stop = ret;
+
+	return ret;
+}
+
+/**
+ * cm_get_target_status - Check current status and get next target status.
+ * @cm: the Charger Manager representing the battery.
+ */
+static int cm_get_target_status(struct charger_manager *cm)
+{
+	if (!is_ext_pwr_online(cm))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (cm_check_thermal_status(cm)) {
+		/* Check if discharging duration exceeds limit. */
+		if (check_charging_duration(cm))
+			goto charging_ok;
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+
+	switch (cm->battery_status) {
+	case POWER_SUPPLY_STATUS_CHARGING:
+		/* Check if charging duration exceeds limit. */
+		if (check_charging_duration(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	case POWER_SUPPLY_STATUS_FULL:
+		if (is_full_charged(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	default:
+		break;
+	}
+
+charging_ok:
+	/* Charging is allowed. */
+	return POWER_SUPPLY_STATUS_CHARGING;
+}
+
+/**
+ * _cm_monitor - Monitor the temperature and return true for exceptions.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * Returns true if there is an event to notify for the battery.
+ * (True if the status of "emergency_stop" changes)
+ */
+static bool _cm_monitor(struct charger_manager *cm)
+{
+	int target;
+
+	target = cm_get_target_status(cm);
+
+	try_charger_enable(cm, (target == POWER_SUPPLY_STATUS_CHARGING));
+
+	if (cm->battery_status != target) {
+		cm->battery_status = target;
+		power_supply_changed(cm->charger_psy);
+	}
+
+	return (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING);
+}
+
+/**
+ * cm_monitor - Monitor every battery.
+ *
+ * Returns true if there is an event to notify from any of the batteries.
+ * (True if the status of "emergency_stop" changes)
+ */
+static bool cm_monitor(void)
+{
+	bool stop = false;
+	struct charger_manager *cm;
+
+	mutex_lock(&cm_list_mtx);
+
+	list_for_each_entry(cm, &cm_list, entry) {
+		if (_cm_monitor(cm))
+			stop = true;
+	}
+
+	mutex_unlock(&cm_list_mtx);
+
+	return stop;
+}
+
+/**
+ * _setup_polling - Setup the next instance of polling.
+ * @work: work_struct of the function _setup_polling.
+ */
+static void _setup_polling(struct work_struct *work)
+{
+	unsigned long min = ULONG_MAX;
+	struct charger_manager *cm;
+	bool keep_polling = false;
+	unsigned long _next_polling;
+
+	mutex_lock(&cm_list_mtx);
+
+	list_for_each_entry(cm, &cm_list, entry) {
+		if (is_polling_required(cm) && cm->desc->polling_interval_ms) {
+			keep_polling = true;
+
+			if (min > cm->desc->polling_interval_ms)
+				min = cm->desc->polling_interval_ms;
+		}
+	}
+
+	polling_jiffy = msecs_to_jiffies(min);
+	if (polling_jiffy <= CM_JIFFIES_SMALL)
+		polling_jiffy = CM_JIFFIES_SMALL + 1;
+
+	if (!keep_polling)
+		polling_jiffy = ULONG_MAX;
+	if (polling_jiffy == ULONG_MAX)
+		goto out;
+
+	WARN(cm_wq == NULL, "charger-manager: workqueue not initialized"
+			    ". try it later. %s\n", __func__);
+
+	/*
+	 * Use mod_delayed_work() iff the next polling interval should
+	 * occur before the currently scheduled one.  If @cm_monitor_work
+	 * isn't active, the end result is the same, so no need to worry
+	 * about stale @next_polling.
+	 */
+	_next_polling = jiffies + polling_jiffy;
+
+	if (time_before(_next_polling, next_polling)) {
+		mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy);
+		next_polling = _next_polling;
+	} else {
+		if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy))
+			next_polling = _next_polling;
+	}
+out:
+	mutex_unlock(&cm_list_mtx);
+}
+static DECLARE_WORK(setup_polling, _setup_polling);
+
+/**
+ * cm_monitor_poller - The Monitor / Poller.
+ * @work: work_struct of the function cm_monitor_poller
+ *
+ * During non-suspended state, cm_monitor_poller is used to poll and monitor
+ * the batteries.
+ */
+static void cm_monitor_poller(struct work_struct *work)
+{
+	cm_monitor();
+	schedule_work(&setup_polling);
+}
+
+static int charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct charger_manager *cm = power_supply_get_drvdata(psy);
+	struct charger_desc *desc = cm->desc;
+	struct power_supply *fuel_gauge = NULL;
+	int ret = 0;
+	int uV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = cm->battery_status;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (cm->emergency_stop == CM_BATT_OVERHEAT)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (cm->emergency_stop == CM_BATT_COLD)
+			val->intval = POWER_SUPPLY_HEALTH_COLD;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (is_batt_present(cm))
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = get_batt_uV(cm, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+		if (!fuel_gauge) {
+			ret = -ENODEV;
+			break;
+		}
+		ret = power_supply_get_property(fuel_gauge,
+				POWER_SUPPLY_PROP_CURRENT_NOW, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		return cm_get_battery_temperature(cm, &val->intval);
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (!is_batt_present(cm)) {
+			/* There is no battery. Assume 100% */
+			val->intval = 100;
+			break;
+		}
+
+		fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+		if (!fuel_gauge) {
+			ret = -ENODEV;
+			break;
+		}
+
+		ret = power_supply_get_property(fuel_gauge,
+					POWER_SUPPLY_PROP_CAPACITY, val);
+		if (ret)
+			break;
+
+		if (val->intval > 100) {
+			val->intval = 100;
+			break;
+		}
+		if (val->intval < 0)
+			val->intval = 0;
+
+		/* Do not adjust SOC when charging: voltage is overrated */
+		if (is_charging(cm))
+			break;
+
+		/*
+		 * If the capacity value is inconsistent, calibrate it base on
+		 * the battery voltage values and the thresholds given as desc
+		 */
+		ret = get_batt_uV(cm, &uV);
+		if (ret) {
+			/* Voltage information not available. No calibration */
+			ret = 0;
+			break;
+		}
+
+		if (desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV &&
+		    !is_charging(cm)) {
+			val->intval = 100;
+			break;
+		}
+
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (is_ext_pwr_online(cm))
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+		if (!fuel_gauge) {
+			ret = -ENODEV;
+			break;
+		}
+		ret = power_supply_get_property(fuel_gauge, psp, val);
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (fuel_gauge)
+		power_supply_put(fuel_gauge);
+	return ret;
+}
+
+#define NUM_CHARGER_PSY_OPTIONAL	(4)
+static enum power_supply_property default_charger_props[] = {
+	/* Guaranteed to provide */
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_ONLINE,
+	/*
+	 * Optional properties are:
+	 * POWER_SUPPLY_PROP_CHARGE_FULL,
+	 * POWER_SUPPLY_PROP_CHARGE_NOW,
+	 * POWER_SUPPLY_PROP_CURRENT_NOW,
+	 * POWER_SUPPLY_PROP_TEMP,
+	 */
+};
+
+static const struct power_supply_desc psy_default = {
+	.name = "battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = default_charger_props,
+	.num_properties = ARRAY_SIZE(default_charger_props),
+	.get_property = charger_get_property,
+	.no_thermal = true,
+};
+
+/**
+ * cm_setup_timer - For in-suspend monitoring setup wakeup alarm
+ *		    for suspend_again.
+ *
+ * Returns true if the alarm is set for Charger Manager to use.
+ * Returns false if
+ *	cm_setup_timer fails to set an alarm,
+ *	cm_setup_timer does not need to set an alarm for Charger Manager,
+ *	or an alarm previously configured is to be used.
+ */
+static bool cm_setup_timer(void)
+{
+	struct charger_manager *cm;
+	unsigned int wakeup_ms = UINT_MAX;
+	int timer_req = 0;
+
+	if (time_after(next_polling, jiffies))
+		CM_MIN_VALID(wakeup_ms,
+			jiffies_to_msecs(next_polling - jiffies));
+
+	mutex_lock(&cm_list_mtx);
+	list_for_each_entry(cm, &cm_list, entry) {
+		/* Skip if polling is not required for this CM */
+		if (!is_polling_required(cm) && !cm->emergency_stop)
+			continue;
+		timer_req++;
+		if (cm->desc->polling_interval_ms == 0)
+			continue;
+		CM_MIN_VALID(wakeup_ms, cm->desc->polling_interval_ms);
+	}
+	mutex_unlock(&cm_list_mtx);
+
+	if (timer_req && cm_timer) {
+		ktime_t now, add;
+
+		/*
+		 * Set alarm with the polling interval (wakeup_ms)
+		 * The alarm time should be NOW + CM_RTC_SMALL or later.
+		 */
+		if (wakeup_ms == UINT_MAX ||
+			wakeup_ms < CM_RTC_SMALL * MSEC_PER_SEC)
+			wakeup_ms = 2 * CM_RTC_SMALL * MSEC_PER_SEC;
+
+		pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms);
+
+		now = ktime_get_boottime();
+		add = ktime_set(wakeup_ms / MSEC_PER_SEC,
+				(wakeup_ms % MSEC_PER_SEC) * NSEC_PER_MSEC);
+		alarm_start(cm_timer, ktime_add(now, add));
+
+		cm_suspend_duration_ms = wakeup_ms;
+
+		return true;
+	}
+	return false;
+}
+
+/**
+ * charger_extcon_work - enable/diable charger according to the state
+ *			of charger cable
+ *
+ * @work: work_struct of the function charger_extcon_work.
+ */
+static void charger_extcon_work(struct work_struct *work)
+{
+	struct charger_cable *cable =
+			container_of(work, struct charger_cable, wq);
+	int ret;
+
+	if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) {
+		ret = regulator_set_current_limit(cable->charger->consumer,
+					cable->min_uA, cable->max_uA);
+		if (ret < 0) {
+			pr_err("Cannot set current limit of %s (%s)\n",
+			       cable->charger->regulator_name, cable->name);
+			return;
+		}
+
+		pr_info("Set current limit of %s : %duA ~ %duA\n",
+			cable->charger->regulator_name,
+			cable->min_uA, cable->max_uA);
+	}
+
+	cancel_delayed_work(&cm_monitor_work);
+	queue_delayed_work(cm_wq, &cm_monitor_work, 0);
+}
+
+/**
+ * charger_extcon_notifier - receive the state of charger cable
+ *			when registered cable is attached or detached.
+ *
+ * @self: the notifier block of the charger_extcon_notifier.
+ * @event: the cable state.
+ * @ptr: the data pointer of notifier block.
+ */
+static int charger_extcon_notifier(struct notifier_block *self,
+			unsigned long event, void *ptr)
+{
+	struct charger_cable *cable =
+		container_of(self, struct charger_cable, nb);
+
+	/*
+	 * The newly state of charger cable.
+	 * If cable is attached, cable->attached is true.
+	 */
+	cable->attached = event;
+
+	/*
+	 * Setup work for controlling charger(regulator)
+	 * according to charger cable.
+	 */
+	schedule_work(&cable->wq);
+
+	return NOTIFY_DONE;
+}
+
+/**
+ * charger_extcon_init - register external connector to use it
+ *			as the charger cable
+ *
+ * @cm: the Charger Manager representing the battery.
+ * @cable: the Charger cable representing the external connector.
+ */
+static int charger_extcon_init(struct charger_manager *cm,
+		struct charger_cable *cable)
+{
+	int ret, i;
+	u64 extcon_type = EXTCON_NONE;
+
+	/*
+	 * Charger manager use Extcon framework to identify
+	 * the charger cable among various external connector
+	 * cable (e.g., TA, USB, MHL, Dock).
+	 */
+	INIT_WORK(&cable->wq, charger_extcon_work);
+	cable->nb.notifier_call = charger_extcon_notifier;
+
+	cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
+	if (IS_ERR(cable->extcon_dev)) {
+		pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
+			cable->extcon_name, cable->name);
+		return PTR_ERR(cable->extcon_dev);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
+		if (!strcmp(cable->name, extcon_mapping[i].name)) {
+			extcon_type = extcon_mapping[i].extcon_type;
+			break;
+		}
+	}
+	if (extcon_type == EXTCON_NONE) {
+		pr_err("Cannot find cable for type %s", cable->name);
+		return -EINVAL;
+	}
+
+	cable->extcon_type = extcon_type;
+
+	ret = devm_extcon_register_notifier(cm->dev, cable->extcon_dev,
+		cable->extcon_type, &cable->nb);
+	if (ret < 0) {
+		pr_err("Cannot register extcon_dev for %s (cable: %s)\n",
+			cable->extcon_name, cable->name);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * charger_manager_register_extcon - Register extcon device to receive state
+ *				     of charger cable.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function support EXTCON(External Connector) subsystem to detect the
+ * state of charger cables for enabling or disabling charger(regulator) and
+ * select the charger cable for charging among a number of external cable
+ * according to policy of H/W board.
+ */
+static int charger_manager_register_extcon(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	struct charger_regulator *charger;
+	unsigned long event;
+	int ret;
+	int i;
+	int j;
+
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		charger = &desc->charger_regulators[i];
+
+		charger->consumer = regulator_get(cm->dev,
+					charger->regulator_name);
+		if (IS_ERR(charger->consumer)) {
+			dev_err(cm->dev, "Cannot find charger(%s)\n",
+				charger->regulator_name);
+			return PTR_ERR(charger->consumer);
+		}
+		charger->cm = cm;
+
+		for (j = 0; j < charger->num_cables; j++) {
+			struct charger_cable *cable = &charger->cables[j];
+
+			ret = charger_extcon_init(cm, cable);
+			if (ret < 0) {
+				dev_err(cm->dev, "Cannot initialize charger(%s)\n",
+					charger->regulator_name);
+				return ret;
+			}
+			cable->charger = charger;
+			cable->cm = cm;
+
+			event = extcon_get_state(cable->extcon_dev,
+				cable->extcon_type);
+			charger_extcon_notifier(&cable->nb,
+				event, NULL);
+		}
+	}
+
+	return 0;
+}
+
+/* help function of sysfs node to control charger(regulator) */
+static ssize_t charger_name_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator, attr_name);
+
+	return sprintf(buf, "%s\n", charger->regulator_name);
+}
+
+static ssize_t charger_state_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator, attr_state);
+	int state = 0;
+
+	if (!charger->externally_control)
+		state = regulator_is_enabled(charger->consumer);
+
+	return sprintf(buf, "%s\n", state ? "enabled" : "disabled");
+}
+
+static ssize_t charger_externally_control_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger = container_of(attr,
+			struct charger_regulator, attr_externally_control);
+
+	return sprintf(buf, "%d\n", charger->externally_control);
+}
+
+static ssize_t charger_externally_control_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator,
+					attr_externally_control);
+	struct charger_manager *cm = charger->cm;
+	struct charger_desc *desc = cm->desc;
+	int i;
+	int ret;
+	int externally_control;
+	int chargers_externally_control = 1;
+
+	ret = sscanf(buf, "%d", &externally_control);
+	if (ret == 0) {
+		ret = -EINVAL;
+		return ret;
+	}
+
+	if (!externally_control) {
+		charger->externally_control = 0;
+		return count;
+	}
+
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		if (&desc->charger_regulators[i] != charger &&
+			!desc->charger_regulators[i].externally_control) {
+			/*
+			 * At least, one charger is controlled by
+			 * charger-manager
+			 */
+			chargers_externally_control = 0;
+			break;
+		}
+	}
+
+	if (!chargers_externally_control) {
+		if (cm->charger_enabled) {
+			try_charger_enable(charger->cm, false);
+			charger->externally_control = externally_control;
+			try_charger_enable(charger->cm, true);
+		} else {
+			charger->externally_control = externally_control;
+		}
+	} else {
+		dev_warn(cm->dev,
+			 "'%s' regulator should be controlled in charger-manager because charger-manager must need at least one charger for charging\n",
+			 charger->regulator_name);
+	}
+
+	return count;
+}
+
+/**
+ * charger_manager_prepare_sysfs - Prepare sysfs entry for each charger
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function add sysfs entry for charger(regulator) to control charger from
+ * user-space. If some development board use one more chargers for charging
+ * but only need one charger on specific case which is dependent on user
+ * scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/
+ * class/power_supply/battery/charger.[index]/externally_control'. For example,
+ * if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/
+ * externally_control, this charger isn't controlled from charger-manager and
+ * always stay off state of regulator.
+ */
+static int charger_manager_prepare_sysfs(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	struct charger_regulator *charger;
+	int chargers_externally_control = 1;
+	char *name;
+	int i;
+
+	/* Create sysfs entry to control charger(regulator) */
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		charger = &desc->charger_regulators[i];
+
+		name = devm_kasprintf(cm->dev, GFP_KERNEL, "charger.%d", i);
+		if (!name)
+			return -ENOMEM;
+
+		charger->attrs[0] = &charger->attr_name.attr;
+		charger->attrs[1] = &charger->attr_state.attr;
+		charger->attrs[2] = &charger->attr_externally_control.attr;
+		charger->attrs[3] = NULL;
+
+		charger->attr_grp.name = name;
+		charger->attr_grp.attrs = charger->attrs;
+		desc->sysfs_groups[i] = &charger->attr_grp;
+
+		sysfs_attr_init(&charger->attr_name.attr);
+		charger->attr_name.attr.name = "name";
+		charger->attr_name.attr.mode = 0444;
+		charger->attr_name.show = charger_name_show;
+
+		sysfs_attr_init(&charger->attr_state.attr);
+		charger->attr_state.attr.name = "state";
+		charger->attr_state.attr.mode = 0444;
+		charger->attr_state.show = charger_state_show;
+
+		sysfs_attr_init(&charger->attr_externally_control.attr);
+		charger->attr_externally_control.attr.name
+				= "externally_control";
+		charger->attr_externally_control.attr.mode = 0644;
+		charger->attr_externally_control.show
+				= charger_externally_control_show;
+		charger->attr_externally_control.store
+				= charger_externally_control_store;
+
+		if (!desc->charger_regulators[i].externally_control ||
+				!chargers_externally_control)
+			chargers_externally_control = 0;
+
+		dev_info(cm->dev, "'%s' regulator's externally_control is %d\n",
+			 charger->regulator_name, charger->externally_control);
+	}
+
+	if (chargers_externally_control) {
+		dev_err(cm->dev, "Cannot register regulator because charger-manager must need at least one charger for charging battery\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cm_init_thermal_data(struct charger_manager *cm,
+		struct power_supply *fuel_gauge,
+		enum power_supply_property *properties,
+		size_t *num_properties)
+{
+	struct charger_desc *desc = cm->desc;
+	union power_supply_propval val;
+	int ret;
+
+	/* Verify whether fuel gauge provides battery temperature */
+	ret = power_supply_get_property(fuel_gauge,
+					POWER_SUPPLY_PROP_TEMP, &val);
+
+	if (!ret) {
+		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+		(*num_properties)++;
+		cm->desc->measure_battery_temp = true;
+	}
+#ifdef CONFIG_THERMAL
+	if (ret && desc->thermal_zone) {
+		cm->tzd_batt =
+			thermal_zone_get_zone_by_name(desc->thermal_zone);
+		if (IS_ERR(cm->tzd_batt))
+			return PTR_ERR(cm->tzd_batt);
+
+		/* Use external thermometer */
+		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+		(*num_properties)++;
+		cm->desc->measure_battery_temp = true;
+		ret = 0;
+	}
+#endif
+	if (cm->desc->measure_battery_temp) {
+		/* NOTICE : Default allowable minimum charge temperature is 0 */
+		if (!desc->temp_max)
+			desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX;
+		if (!desc->temp_diff)
+			desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF;
+	}
+
+	return ret;
+}
+
+static const struct of_device_id charger_manager_match[] = {
+	{
+		.compatible = "charger-manager",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, charger_manager_match);
+
+static struct charger_desc *of_cm_parse_desc(struct device *dev)
+{
+	struct charger_desc *desc;
+	struct device_node *np = dev->of_node;
+	u32 poll_mode = CM_POLL_DISABLE;
+	u32 battery_stat = CM_NO_BATTERY;
+	int num_chgs = 0;
+
+	desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	of_property_read_string(np, "cm-name", &desc->psy_name);
+
+	of_property_read_u32(np, "cm-poll-mode", &poll_mode);
+	desc->polling_mode = poll_mode;
+
+	of_property_read_u32(np, "cm-poll-interval",
+				&desc->polling_interval_ms);
+
+	of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt",
+					&desc->fullbatt_vchkdrop_uV);
+	of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV);
+	of_property_read_u32(np, "cm-fullbatt-soc", &desc->fullbatt_soc);
+	of_property_read_u32(np, "cm-fullbatt-capacity",
+					&desc->fullbatt_full_capacity);
+
+	of_property_read_u32(np, "cm-battery-stat", &battery_stat);
+	desc->battery_present = battery_stat;
+
+	/* chargers */
+	num_chgs = of_property_count_strings(np, "cm-chargers");
+	if (num_chgs > 0) {
+		int i;
+
+		/* Allocate empty bin at the tail of array */
+		desc->psy_charger_stat = devm_kcalloc(dev,
+						      num_chgs + 1,
+						      sizeof(char *),
+						      GFP_KERNEL);
+		if (!desc->psy_charger_stat)
+			return ERR_PTR(-ENOMEM);
+
+		for (i = 0; i < num_chgs; i++)
+			of_property_read_string_index(np, "cm-chargers",
+						      i, &desc->psy_charger_stat[i]);
+	}
+
+	of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge);
+
+	of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone);
+
+	of_property_read_u32(np, "cm-battery-cold", &desc->temp_min);
+	if (of_get_property(np, "cm-battery-cold-in-minus", NULL))
+		desc->temp_min *= -1;
+	of_property_read_u32(np, "cm-battery-hot", &desc->temp_max);
+	of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff);
+
+	of_property_read_u32(np, "cm-charging-max",
+				&desc->charging_max_duration_ms);
+	of_property_read_u32(np, "cm-discharging-max",
+				&desc->discharging_max_duration_ms);
+
+	/* battery charger regulators */
+	desc->num_charger_regulators = of_get_child_count(np);
+	if (desc->num_charger_regulators) {
+		struct charger_regulator *chg_regs;
+		struct device_node *child;
+
+		chg_regs = devm_kcalloc(dev,
+					desc->num_charger_regulators,
+					sizeof(*chg_regs),
+					GFP_KERNEL);
+		if (!chg_regs)
+			return ERR_PTR(-ENOMEM);
+
+		desc->charger_regulators = chg_regs;
+
+		desc->sysfs_groups = devm_kcalloc(dev,
+					desc->num_charger_regulators + 1,
+					sizeof(*desc->sysfs_groups),
+					GFP_KERNEL);
+		if (!desc->sysfs_groups)
+			return ERR_PTR(-ENOMEM);
+
+		for_each_child_of_node(np, child) {
+			struct charger_cable *cables;
+			struct device_node *_child;
+
+			of_property_read_string(child, "cm-regulator-name",
+					&chg_regs->regulator_name);
+
+			/* charger cables */
+			chg_regs->num_cables = of_get_child_count(child);
+			if (chg_regs->num_cables) {
+				cables = devm_kcalloc(dev,
+						      chg_regs->num_cables,
+						      sizeof(*cables),
+						      GFP_KERNEL);
+				if (!cables) {
+					of_node_put(child);
+					return ERR_PTR(-ENOMEM);
+				}
+
+				chg_regs->cables = cables;
+
+				for_each_child_of_node(child, _child) {
+					of_property_read_string(_child,
+					"cm-cable-name", &cables->name);
+					of_property_read_string(_child,
+					"cm-cable-extcon",
+					&cables->extcon_name);
+					of_property_read_u32(_child,
+					"cm-cable-min",
+					&cables->min_uA);
+					of_property_read_u32(_child,
+					"cm-cable-max",
+					&cables->max_uA);
+					cables++;
+				}
+			}
+			chg_regs++;
+		}
+	}
+	return desc;
+}
+
+static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node)
+		return of_cm_parse_desc(&pdev->dev);
+	return dev_get_platdata(&pdev->dev);
+}
+
+static enum alarmtimer_restart cm_timer_func(struct alarm *alarm, ktime_t now)
+{
+	cm_timer_set = false;
+	return ALARMTIMER_NORESTART;
+}
+
+static int charger_manager_probe(struct platform_device *pdev)
+{
+	struct charger_desc *desc = cm_get_drv_data(pdev);
+	struct charger_manager *cm;
+	int ret, i = 0;
+	union power_supply_propval val;
+	struct power_supply *fuel_gauge;
+	enum power_supply_property *properties;
+	size_t num_properties;
+	struct power_supply_config psy_cfg = {};
+
+	if (IS_ERR(desc)) {
+		dev_err(&pdev->dev, "No platform data (desc) found\n");
+		return PTR_ERR(desc);
+	}
+
+	cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
+	if (!cm)
+		return -ENOMEM;
+
+	/* Basic Values. Unspecified are Null or 0 */
+	cm->dev = &pdev->dev;
+	cm->desc = desc;
+	psy_cfg.drv_data = cm;
+
+	/* Initialize alarm timer */
+	if (alarmtimer_get_rtcdev()) {
+		cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+		if (!cm_timer)
+			return -ENOMEM;
+		alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
+	}
+
+	/*
+	 * Some of the following do not need to be errors.
+	 * Users may intentionally ignore those features.
+	 */
+	if (desc->fullbatt_uV == 0) {
+		dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
+	}
+	if (!desc->fullbatt_vchkdrop_uV) {
+		dev_info(&pdev->dev, "Disabling full-battery voltage drop checking mechanism as it is not supplied\n");
+		desc->fullbatt_vchkdrop_uV = 0;
+	}
+	if (desc->fullbatt_soc == 0) {
+		dev_info(&pdev->dev, "Ignoring full-battery soc(state of charge) threshold as it is not supplied\n");
+	}
+	if (desc->fullbatt_full_capacity == 0) {
+		dev_info(&pdev->dev, "Ignoring full-battery full capacity threshold as it is not supplied\n");
+	}
+
+	if (!desc->charger_regulators || desc->num_charger_regulators < 1) {
+		dev_err(&pdev->dev, "charger_regulators undefined\n");
+		return -EINVAL;
+	}
+
+	if (!desc->psy_charger_stat || !desc->psy_charger_stat[0]) {
+		dev_err(&pdev->dev, "No power supply defined\n");
+		return -EINVAL;
+	}
+
+	if (!desc->psy_fuel_gauge) {
+		dev_err(&pdev->dev, "No fuel gauge power supply defined\n");
+		return -EINVAL;
+	}
+
+	/* Check if charger's supplies are present at probe */
+	for (i = 0; desc->psy_charger_stat[i]; i++) {
+		struct power_supply *psy;
+
+		psy = power_supply_get_by_name(desc->psy_charger_stat[i]);
+		if (!psy) {
+			dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
+				desc->psy_charger_stat[i]);
+			return -ENODEV;
+		}
+		power_supply_put(psy);
+	}
+
+	if (cm->desc->polling_mode != CM_POLL_DISABLE &&
+	    (desc->polling_interval_ms == 0 ||
+	     msecs_to_jiffies(desc->polling_interval_ms) <= CM_JIFFIES_SMALL)) {
+		dev_err(&pdev->dev, "polling_interval_ms is too small\n");
+		return -EINVAL;
+	}
+
+	if (!desc->charging_max_duration_ms ||
+			!desc->discharging_max_duration_ms) {
+		dev_info(&pdev->dev, "Cannot limit charging duration checking mechanism to prevent overcharge/overheat and control discharging duration\n");
+		desc->charging_max_duration_ms = 0;
+		desc->discharging_max_duration_ms = 0;
+	}
+
+	platform_set_drvdata(pdev, cm);
+
+	memcpy(&cm->charger_psy_desc, &psy_default, sizeof(psy_default));
+
+	if (!desc->psy_name)
+		strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
+	else
+		strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
+	cm->charger_psy_desc.name = cm->psy_name_buf;
+
+	/* Allocate for psy properties because they may vary */
+	properties = devm_kcalloc(&pdev->dev,
+			     ARRAY_SIZE(default_charger_props) +
+				NUM_CHARGER_PSY_OPTIONAL,
+			     sizeof(*properties), GFP_KERNEL);
+	if (!properties)
+		return -ENOMEM;
+
+	memcpy(properties, default_charger_props,
+		sizeof(enum power_supply_property) *
+		ARRAY_SIZE(default_charger_props));
+	num_properties = ARRAY_SIZE(default_charger_props);
+
+	/* Find which optional psy-properties are available */
+	fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
+	if (!fuel_gauge) {
+		dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
+			desc->psy_fuel_gauge);
+		return -ENODEV;
+	}
+	if (!power_supply_get_property(fuel_gauge,
+					POWER_SUPPLY_PROP_CHARGE_FULL, &val)) {
+		properties[num_properties] =
+				POWER_SUPPLY_PROP_CHARGE_FULL;
+		num_properties++;
+	}
+	if (!power_supply_get_property(fuel_gauge,
+					  POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
+		properties[num_properties] =
+				POWER_SUPPLY_PROP_CHARGE_NOW;
+		num_properties++;
+	}
+	if (!power_supply_get_property(fuel_gauge,
+					  POWER_SUPPLY_PROP_CURRENT_NOW,
+					  &val)) {
+		properties[num_properties] =
+				POWER_SUPPLY_PROP_CURRENT_NOW;
+		num_properties++;
+	}
+
+	ret = cm_init_thermal_data(cm, fuel_gauge, properties, &num_properties);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize thermal data\n");
+		cm->desc->measure_battery_temp = false;
+	}
+	power_supply_put(fuel_gauge);
+
+	cm->charger_psy_desc.properties = properties;
+	cm->charger_psy_desc.num_properties = num_properties;
+
+	/* Register sysfs entry for charger(regulator) */
+	ret = charger_manager_prepare_sysfs(cm);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Cannot prepare sysfs entry of regulators\n");
+		return ret;
+	}
+	psy_cfg.attr_grp = desc->sysfs_groups;
+
+	cm->charger_psy = power_supply_register(&pdev->dev,
+						&cm->charger_psy_desc,
+						&psy_cfg);
+	if (IS_ERR(cm->charger_psy)) {
+		dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
+			cm->charger_psy_desc.name);
+		return PTR_ERR(cm->charger_psy);
+	}
+
+	/* Register extcon device for charger cable */
+	ret = charger_manager_register_extcon(cm);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot initialize extcon device\n");
+		goto err_reg_extcon;
+	}
+
+	/* Add to the list */
+	mutex_lock(&cm_list_mtx);
+	list_add(&cm->entry, &cm_list);
+	mutex_unlock(&cm_list_mtx);
+
+	/*
+	 * Charger-manager is capable of waking up the system from sleep
+	 * when event is happened through cm_notify_event()
+	 */
+	device_init_wakeup(&pdev->dev, true);
+	device_set_wakeup_capable(&pdev->dev, false);
+
+	/*
+	 * Charger-manager have to check the charging state right after
+	 * initialization of charger-manager and then update current charging
+	 * state.
+	 */
+	cm_monitor();
+
+	schedule_work(&setup_polling);
+
+	return 0;
+
+err_reg_extcon:
+	for (i = 0; i < desc->num_charger_regulators; i++)
+		regulator_put(desc->charger_regulators[i].consumer);
+
+	power_supply_unregister(cm->charger_psy);
+
+	return ret;
+}
+
+static int charger_manager_remove(struct platform_device *pdev)
+{
+	struct charger_manager *cm = platform_get_drvdata(pdev);
+	struct charger_desc *desc = cm->desc;
+	int i = 0;
+
+	/* Remove from the list */
+	mutex_lock(&cm_list_mtx);
+	list_del(&cm->entry);
+	mutex_unlock(&cm_list_mtx);
+
+	cancel_work_sync(&setup_polling);
+	cancel_delayed_work_sync(&cm_monitor_work);
+
+	for (i = 0 ; i < desc->num_charger_regulators ; i++)
+		regulator_put(desc->charger_regulators[i].consumer);
+
+	power_supply_unregister(cm->charger_psy);
+
+	try_charger_enable(cm, false);
+
+	return 0;
+}
+
+static const struct platform_device_id charger_manager_id[] = {
+	{ "charger-manager", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, charger_manager_id);
+
+static int cm_suspend_noirq(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		device_set_wakeup_capable(dev, false);
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static bool cm_need_to_awake(void)
+{
+	struct charger_manager *cm;
+
+	if (cm_timer)
+		return false;
+
+	mutex_lock(&cm_list_mtx);
+	list_for_each_entry(cm, &cm_list, entry) {
+		if (is_charging(cm)) {
+			mutex_unlock(&cm_list_mtx);
+			return true;
+		}
+	}
+	mutex_unlock(&cm_list_mtx);
+
+	return false;
+}
+
+static int cm_suspend_prepare(struct device *dev)
+{
+	if (cm_need_to_awake())
+		return -EBUSY;
+
+	if (!cm_suspended)
+		cm_suspended = true;
+
+	cm_timer_set = cm_setup_timer();
+
+	if (cm_timer_set) {
+		cancel_work_sync(&setup_polling);
+		cancel_delayed_work_sync(&cm_monitor_work);
+	}
+
+	return 0;
+}
+
+static void cm_suspend_complete(struct device *dev)
+{
+	struct charger_manager *cm = dev_get_drvdata(dev);
+
+	if (cm_suspended)
+		cm_suspended = false;
+
+	if (cm_timer_set) {
+		ktime_t remain;
+
+		alarm_cancel(cm_timer);
+		cm_timer_set = false;
+		remain = alarm_expires_remaining(cm_timer);
+		cm_suspend_duration_ms -= ktime_to_ms(remain);
+		schedule_work(&setup_polling);
+	}
+
+	_cm_monitor(cm);
+
+	device_set_wakeup_capable(cm->dev, false);
+}
+
+static const struct dev_pm_ops charger_manager_pm = {
+	.prepare	= cm_suspend_prepare,
+	.suspend_noirq	= cm_suspend_noirq,
+	.complete	= cm_suspend_complete,
+};
+
+static struct platform_driver charger_manager_driver = {
+	.driver = {
+		.name = "charger-manager",
+		.pm = &charger_manager_pm,
+		.of_match_table = charger_manager_match,
+	},
+	.probe = charger_manager_probe,
+	.remove = charger_manager_remove,
+	.id_table = charger_manager_id,
+};
+
+static int __init charger_manager_init(void)
+{
+	cm_wq = create_freezable_workqueue("charger_manager");
+	if (unlikely(!cm_wq))
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&cm_monitor_work, cm_monitor_poller);
+
+	return platform_driver_register(&charger_manager_driver);
+}
+late_initcall(charger_manager_init);
+
+static void __exit charger_manager_cleanup(void)
+{
+	destroy_workqueue(cm_wq);
+	cm_wq = NULL;
+
+	platform_driver_unregister(&charger_manager_driver);
+}
+module_exit(charger_manager_cleanup);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("Charger Manager");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/collie_battery.c b/drivers/power/supply/collie_battery.c
new file mode 100644
index 000000000..7fb9b549f
--- /dev/null
+++ b/drivers/power/supply/collie_battery.c
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery and Power Management code for the Sharp SL-5x00
+ *
+ * Copyright (C) 2009 Thomas Kunze
+ *
+ * based on tosa_battery.c
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/ucb1x00.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+#include <mach/collie.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+static struct ucb1x00 *ucb;
+
+struct collie_bat {
+	int status;
+	struct power_supply *psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct collie_bat *bat);
+	struct gpio_desc *gpio_full;
+	struct gpio_desc *gpio_charge_on;
+
+	int technology;
+
+	struct gpio_desc *gpio_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	struct gpio_desc *gpio_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct collie_bat collie_bat_main;
+
+static unsigned long collie_read_bat(struct collie_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (!bat->gpio_bat || bat->adc_bat < 0)
+		return 0;
+	mutex_lock(&bat_lock);
+	gpiod_set_value(bat->gpio_bat, 1);
+	msleep(5);
+	ucb1x00_adc_enable(ucb);
+	value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
+	ucb1x00_adc_disable(ucb);
+	gpiod_set_value(bat->gpio_bat, 0);
+	mutex_unlock(&bat_lock);
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long collie_read_temp(struct collie_bat *bat)
+{
+	unsigned long value = 0;
+	if (!bat->gpio_temp || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpiod_set_value(bat->gpio_temp, 1);
+	msleep(5);
+	ucb1x00_adc_enable(ucb);
+	value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
+	ucb1x00_adc_disable(ucb);
+	gpiod_set_value(bat->gpio_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int collie_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct collie_bat *bat = power_supply_get_drvdata(psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = collie_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = collie_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static void collie_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("collie_bat_gpio irq\n");
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void collie_bat_update(struct collie_bat *bat)
+{
+	int old;
+	struct power_supply *psy = bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->desc->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpiod_set_value(bat->gpio_charge_on, 1);
+			mdelay(15);
+		}
+
+		if (gpiod_get_value(bat->gpio_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = collie_read_bat(bat);
+
+			gpiod_set_value(bat->gpio_charge_on, 0);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpiod_set_value(bat->gpio_charge_on, 1);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpiod_set_value(bat->gpio_charge_on, 0);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void collie_bat_work(struct work_struct *work)
+{
+	collie_bat_update(&collie_bat_main);
+}
+
+
+static enum power_supply_property collie_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static enum power_supply_property collie_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static const struct power_supply_desc collie_bat_main_desc = {
+	.name		= "main-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= collie_bat_main_props,
+	.num_properties	= ARRAY_SIZE(collie_bat_main_props),
+	.get_property	= collie_bat_get_property,
+	.external_power_changed = collie_bat_external_power_changed,
+	.use_for_apm	= 1,
+};
+
+static struct collie_bat collie_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = NULL,
+
+	.gpio_full = NULL,
+	.gpio_charge_on = NULL,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = NULL,
+	.adc_bat = UCB_ADC_INP_AD1,
+	.adc_bat_divider = 155,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = NULL,
+	.adc_temp = UCB_ADC_INP_AD0,
+	.adc_temp_divider = 10000,
+};
+
+static const struct power_supply_desc collie_bat_bu_desc = {
+	.name		= "backup-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= collie_bat_bu_props,
+	.num_properties	= ARRAY_SIZE(collie_bat_bu_props),
+	.get_property	= collie_bat_get_property,
+	.external_power_changed = collie_bat_external_power_changed,
+};
+
+static struct collie_bat collie_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+	.psy = NULL,
+
+	.gpio_full = NULL,
+	.gpio_charge_on = NULL,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpio_bat = NULL,
+	.adc_bat = UCB_ADC_INP_AD1,
+	.adc_bat_divider = 155,
+	.bat_max = 3000000,
+	.bat_min = 1900000,
+
+	.gpio_temp = NULL,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+/* Obtained but unused GPIO */
+static struct gpio_desc *collie_mbat_low;
+
+#ifdef CONFIG_PM
+static int wakeup_enabled;
+
+static int collie_bat_suspend(struct ucb1x00_dev *dev)
+{
+	/* flush all pending status updates */
+	flush_work(&bat_work);
+
+	if (device_may_wakeup(&dev->ucb->dev) &&
+	    collie_bat_main.status == POWER_SUPPLY_STATUS_CHARGING)
+		wakeup_enabled = !enable_irq_wake(gpiod_to_irq(collie_bat_main.gpio_full));
+	else
+		wakeup_enabled = 0;
+
+	return 0;
+}
+
+static int collie_bat_resume(struct ucb1x00_dev *dev)
+{
+	if (wakeup_enabled)
+		disable_irq_wake(gpiod_to_irq(collie_bat_main.gpio_full));
+
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define collie_bat_suspend NULL
+#define collie_bat_resume NULL
+#endif
+
+static int collie_bat_probe(struct ucb1x00_dev *dev)
+{
+	int ret;
+	struct power_supply_config psy_main_cfg = {}, psy_bu_cfg = {};
+	struct gpio_chip *gc = &dev->ucb->gpio;
+
+	if (!machine_is_collie())
+		return -ENODEV;
+
+	ucb = dev->ucb;
+
+	/* Obtain all the main battery GPIOs */
+	collie_bat_main.gpio_full = gpiod_get(&dev->ucb->dev,
+					      "main battery full",
+					      GPIOD_IN);
+	if (IS_ERR(collie_bat_main.gpio_full))
+		return PTR_ERR(collie_bat_main.gpio_full);
+
+	collie_mbat_low = gpiod_get(&dev->ucb->dev,
+				    "main battery low",
+				    GPIOD_IN);
+	if (IS_ERR(collie_mbat_low)) {
+		ret = PTR_ERR(collie_mbat_low);
+		goto err_put_gpio_full;
+	}
+
+	collie_bat_main.gpio_charge_on = gpiod_get(&dev->ucb->dev,
+						   "main charge on",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(collie_bat_main.gpio_charge_on)) {
+		ret = PTR_ERR(collie_bat_main.gpio_charge_on);
+		goto err_put_mbat_low;
+	}
+
+	/* COLLIE_GPIO_MBAT_ON = GPIO 7 on the UCB (TC35143) */
+	collie_bat_main.gpio_bat = gpiochip_request_own_desc(gc,
+						7,
+						"main battery",
+						GPIO_ACTIVE_HIGH,
+						GPIOD_OUT_LOW);
+	if (IS_ERR(collie_bat_main.gpio_bat)) {
+		ret = PTR_ERR(collie_bat_main.gpio_bat);
+		goto err_put_gpio_charge_on;
+	}
+
+	/* COLLIE_GPIO_TMP_ON = GPIO 9 on the UCB (TC35143) */
+	collie_bat_main.gpio_temp = gpiochip_request_own_desc(gc,
+						9,
+						"main battery temp",
+						GPIO_ACTIVE_HIGH,
+						GPIOD_OUT_LOW);
+	if (IS_ERR(collie_bat_main.gpio_temp)) {
+		ret = PTR_ERR(collie_bat_main.gpio_temp);
+		goto err_free_gpio_bat;
+	}
+
+	/*
+	 * Obtain the backup battery COLLIE_GPIO_BBAT_ON which is
+	 * GPIO 8 on the UCB (TC35143)
+	 */
+	collie_bat_bu.gpio_bat = gpiochip_request_own_desc(gc,
+						8,
+						"backup battery",
+						GPIO_ACTIVE_HIGH,
+						GPIOD_OUT_LOW);
+	if (IS_ERR(collie_bat_bu.gpio_bat)) {
+		ret = PTR_ERR(collie_bat_bu.gpio_bat);
+		goto err_free_gpio_temp;
+	}
+
+	mutex_init(&collie_bat_main.work_lock);
+
+	INIT_WORK(&bat_work, collie_bat_work);
+
+	psy_main_cfg.drv_data = &collie_bat_main;
+	collie_bat_main.psy = power_supply_register(&dev->ucb->dev,
+						    &collie_bat_main_desc,
+						    &psy_main_cfg);
+	if (IS_ERR(collie_bat_main.psy)) {
+		ret = PTR_ERR(collie_bat_main.psy);
+		goto err_psy_reg_main;
+	}
+
+	psy_bu_cfg.drv_data = &collie_bat_bu;
+	collie_bat_bu.psy = power_supply_register(&dev->ucb->dev,
+						  &collie_bat_bu_desc,
+						  &psy_bu_cfg);
+	if (IS_ERR(collie_bat_bu.psy)) {
+		ret = PTR_ERR(collie_bat_bu.psy);
+		goto err_psy_reg_bu;
+	}
+
+	ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
+				collie_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &collie_bat_main);
+	if (ret)
+		goto err_irq;
+
+	device_init_wakeup(&ucb->dev, 1);
+	schedule_work(&bat_work);
+
+	return 0;
+
+err_irq:
+	power_supply_unregister(collie_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(collie_bat_main.psy);
+err_psy_reg_main:
+	/* see comment in collie_bat_remove */
+	cancel_work_sync(&bat_work);
+	gpiochip_free_own_desc(collie_bat_bu.gpio_bat);
+err_free_gpio_temp:
+	gpiochip_free_own_desc(collie_bat_main.gpio_temp);
+err_free_gpio_bat:
+	gpiochip_free_own_desc(collie_bat_main.gpio_bat);
+err_put_gpio_charge_on:
+	gpiod_put(collie_bat_main.gpio_charge_on);
+err_put_mbat_low:
+	gpiod_put(collie_mbat_low);
+err_put_gpio_full:
+	gpiod_put(collie_bat_main.gpio_full);
+
+	return ret;
+}
+
+static void collie_bat_remove(struct ucb1x00_dev *dev)
+{
+	free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
+	power_supply_unregister(collie_bat_bu.psy);
+	power_supply_unregister(collie_bat_main.psy);
+
+	/* These are obtained from the machine */
+	gpiod_put(collie_bat_main.gpio_full);
+	gpiod_put(collie_mbat_low);
+	gpiod_put(collie_bat_main.gpio_charge_on);
+	/* These are directly from the UCB so let's free them */
+	gpiochip_free_own_desc(collie_bat_main.gpio_bat);
+	gpiochip_free_own_desc(collie_bat_main.gpio_temp);
+	gpiochip_free_own_desc(collie_bat_bu.gpio_bat);
+	/*
+	 * Now cancel the bat_work.  We won't get any more schedules,
+	 * since all sources (isr and external_power_changed) are
+	 * unregistered now.
+	 */
+	cancel_work_sync(&bat_work);
+}
+
+static struct ucb1x00_driver collie_bat_driver = {
+	.add		= collie_bat_probe,
+	.remove		= collie_bat_remove,
+	.suspend	= collie_bat_suspend,
+	.resume		= collie_bat_resume,
+};
+
+static int __init collie_bat_init(void)
+{
+	return ucb1x00_register_driver(&collie_bat_driver);
+}
+
+static void __exit collie_bat_exit(void)
+{
+	ucb1x00_unregister_driver(&collie_bat_driver);
+}
+
+module_init(collie_bat_init);
+module_exit(collie_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Kunze");
+MODULE_DESCRIPTION("Collie battery driver");
diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
new file mode 100644
index 000000000..d98d9244e
--- /dev/null
+++ b/drivers/power/supply/cpcap-battery.c
@@ -0,0 +1,1180 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for CPCAP PMIC
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Some parts of the code based on earlier Motorola mapphone Linux kernel
+ * drivers:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/moduleparam.h>
+
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to
+ * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0"
+ * to enable BATTDETEN, LOBAT and EOL features. We currently use
+ * LOBAT interrupts instead of EOL.
+ */
+#define CPCAP_REG_BPEOL_BIT_EOL9	BIT(9)	/* Set for EOL irq */
+#define CPCAP_REG_BPEOL_BIT_EOL8	BIT(8)	/* Set for EOL irq */
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN7	BIT(7)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN6	BIT(6)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN5	BIT(5)
+#define CPCAP_REG_BPEOL_BIT_EOL_MULTI	BIT(4)	/* Set for multiple EOL irqs */
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN3	BIT(3)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN2	BIT(2)
+#define CPCAP_REG_BPEOL_BIT_BATTDETEN	BIT(1)	/* Enable battery detect */
+#define CPCAP_REG_BPEOL_BIT_EOLSEL	BIT(0)	/* BPDET = 0, EOL = 1 */
+
+/*
+ * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030
+ * coulomb counter registers rather than the mc13892 registers. Both twl6030
+ * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892
+ * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop
+ * the coulomb counter like cpcap does. So for now, we use the twl6030 style
+ * naming for the registers.
+ */
+#define CPCAP_REG_CCC1_ACTIVE_MODE1	BIT(4)	/* Update rate */
+#define CPCAP_REG_CCC1_ACTIVE_MODE0	BIT(3)	/* Update rate */
+#define CPCAP_REG_CCC1_AUTOCLEAR	BIT(2)	/* Resets sample registers */
+#define CPCAP_REG_CCC1_CAL_EN		BIT(1)	/* Clears after write in 1s */
+#define CPCAP_REG_CCC1_PAUSE		BIT(0)	/* Stop counters, allow write */
+#define CPCAP_REG_CCC1_RESET_MASK	(CPCAP_REG_CCC1_AUTOCLEAR | \
+					 CPCAP_REG_CCC1_CAL_EN)
+
+#define CPCAP_REG_CCCC2_RATE1		BIT(5)
+#define CPCAP_REG_CCCC2_RATE0		BIT(4)
+#define CPCAP_REG_CCCC2_ENABLE		BIT(3)
+
+#define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS	250
+
+#define CPCAP_BATTERY_EB41_HW4X_ID 0x9E
+#define CPCAP_BATTERY_BW8X_ID 0x98
+
+enum {
+	CPCAP_BATTERY_IIO_BATTDET,
+	CPCAP_BATTERY_IIO_VOLTAGE,
+	CPCAP_BATTERY_IIO_CHRG_CURRENT,
+	CPCAP_BATTERY_IIO_BATT_CURRENT,
+	CPCAP_BATTERY_IIO_NR,
+};
+
+enum cpcap_battery_irq_action {
+	CPCAP_BATTERY_IRQ_ACTION_NONE,
+	CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE,
+	CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW,
+	CPCAP_BATTERY_IRQ_ACTION_POWEROFF,
+};
+
+struct cpcap_interrupt_desc {
+	const char *name;
+	struct list_head node;
+	int irq;
+	enum cpcap_battery_irq_action action;
+};
+
+struct cpcap_battery_config {
+	int cd_factor;
+	struct power_supply_info info;
+	struct power_supply_battery_info bat;
+};
+
+struct cpcap_coulomb_counter_data {
+	s32 sample;		/* 24 or 32 bits */
+	s32 accumulator;
+	s16 offset;		/* 9 bits */
+	s16 integrator;		/* 13 or 16 bits */
+};
+
+enum cpcap_battery_state {
+	CPCAP_BATTERY_STATE_PREVIOUS,
+	CPCAP_BATTERY_STATE_LATEST,
+	CPCAP_BATTERY_STATE_EMPTY,
+	CPCAP_BATTERY_STATE_FULL,
+	CPCAP_BATTERY_STATE_NR,
+};
+
+struct cpcap_battery_state_data {
+	int voltage;
+	int current_ua;
+	int counter_uah;
+	int temperature;
+	ktime_t time;
+	struct cpcap_coulomb_counter_data cc;
+};
+
+struct cpcap_battery_ddata {
+	struct device *dev;
+	struct regmap *reg;
+	struct list_head irq_list;
+	struct iio_channel *channels[CPCAP_BATTERY_IIO_NR];
+	struct power_supply *psy;
+	struct cpcap_battery_config config;
+	struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR];
+	u32 cc_lsb;		/* μAms per LSB */
+	atomic_t active;
+	int charge_full;
+	int status;
+	u16 vendor;
+	bool check_nvmem;
+	unsigned int is_full:1;
+};
+
+#define CPCAP_NO_BATTERY	-400
+
+static bool ignore_temperature_probe;
+module_param(ignore_temperature_probe, bool, 0660);
+
+static struct cpcap_battery_state_data *
+cpcap_battery_get_state(struct cpcap_battery_ddata *ddata,
+			enum cpcap_battery_state state)
+{
+	if (state >= CPCAP_BATTERY_STATE_NR)
+		return NULL;
+
+	return &ddata->state[state];
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_latest(struct cpcap_battery_ddata *ddata)
+{
+	return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_LATEST);
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_previous(struct cpcap_battery_ddata *ddata)
+{
+	return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_PREVIOUS);
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_get_empty(struct cpcap_battery_ddata *ddata)
+{
+	return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_EMPTY);
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_get_full(struct cpcap_battery_ddata *ddata)
+{
+	return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_FULL);
+}
+
+static int cpcap_charger_battery_temperature(struct cpcap_battery_ddata *ddata,
+					     int *value)
+{
+	struct iio_channel *channel;
+	int error;
+
+	channel = ddata->channels[CPCAP_BATTERY_IIO_BATTDET];
+	error = iio_read_channel_processed(channel, value);
+	if (error < 0) {
+		if (!ignore_temperature_probe)
+			dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+		*value = CPCAP_NO_BATTERY;
+
+		return error;
+	}
+
+	*value /= 100;
+
+	return 0;
+}
+
+static int cpcap_battery_get_voltage(struct cpcap_battery_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_BATTERY_IIO_VOLTAGE];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value * 1000;
+}
+
+static int cpcap_battery_get_current(struct cpcap_battery_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_BATTERY_IIO_BATT_CURRENT];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value * 1000;
+}
+
+/**
+ * cpcap_battery_cc_raw_div - calculate and divide coulomb counter μAms values
+ * @ddata: device driver data
+ * @sample: coulomb counter sample value
+ * @accumulator: coulomb counter integrator value
+ * @offset: coulomb counter offset value
+ * @divider: conversion divider
+ *
+ * Note that cc_lsb and cc_dur values are from Motorola Linux kernel
+ * function data_get_avg_curr_ua() and seem to be based on measured test
+ * results. It also has the following comment:
+ *
+ * Adjustment factors are applied here as a temp solution per the test
+ * results. Need to work out a formal solution for this adjustment.
+ *
+ * A coulomb counter for similar hardware seems to be documented in
+ * "TWL6030 Gas Gauging Basics (Rev. A)" swca095a.pdf in chapter
+ * "10 Calculating Accumulated Current". We however follow what the
+ * Motorola mapphone Linux kernel is doing as there may be either a
+ * TI or ST coulomb counter in the PMIC.
+ */
+static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
+				    s32 sample, s32 accumulator,
+				    s16 offset, u32 divider)
+{
+	s64 acc;
+
+	if (!divider)
+		return 0;
+
+	acc = accumulator;
+	acc -= (s64)sample * offset;
+	acc *= ddata->cc_lsb;
+	acc *= -1;
+	acc = div_s64(acc, divider);
+
+	return acc;
+}
+
+/* 3600000μAms = 1μAh */
+static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata,
+				   s32 sample, s32 accumulator,
+				   s16 offset)
+{
+	return cpcap_battery_cc_raw_div(ddata, sample,
+					accumulator, offset,
+					3600000);
+}
+
+static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata,
+				  s32 sample, s32 accumulator,
+				  s16 offset)
+{
+	return cpcap_battery_cc_raw_div(ddata, sample,
+					accumulator, offset,
+					sample *
+					CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS);
+}
+
+/**
+ * cpcap_battery_read_accumulated - reads cpcap coulomb counter
+ * @ddata: device driver data
+ * @ccd: coulomb counter values
+ *
+ * Based on Motorola mapphone kernel function data_read_regs().
+ * Looking at the registers, the coulomb counter seems similar to
+ * the coulomb counter in TWL6030. See "TWL6030 Gas Gauging Basics
+ * (Rev. A) swca095a.pdf for "10 Calculating Accumulated Current".
+ *
+ * Note that swca095a.pdf instructs to stop the coulomb counter
+ * before reading to avoid values changing. Motorola mapphone
+ * Linux kernel does not do it, so let's assume they've verified
+ * the data produced is correct.
+ */
+static int
+cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
+			       struct cpcap_coulomb_counter_data *ccd)
+{
+	u16 buf[7];	/* CPCAP_REG_CCS1 to CCI */
+	int error;
+
+	ccd->sample = 0;
+	ccd->accumulator = 0;
+	ccd->offset = 0;
+	ccd->integrator = 0;
+
+	/* Read coulomb counter register range */
+	error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1,
+				 buf, ARRAY_SIZE(buf));
+	if (error)
+		return 0;
+
+	/* Sample value CPCAP_REG_CCS1 & 2 */
+	ccd->sample = (buf[1] & 0x0fff) << 16;
+	ccd->sample |= buf[0];
+	if (ddata->vendor == CPCAP_VENDOR_TI)
+		ccd->sample = sign_extend32(24, ccd->sample);
+
+	/* Accumulator value CPCAP_REG_CCA1 & 2 */
+	ccd->accumulator = ((s16)buf[3]) << 16;
+	ccd->accumulator |= buf[2];
+
+	/*
+	 * Coulomb counter calibration offset is CPCAP_REG_CCM,
+	 * REG_CCO seems unused
+	 */
+	ccd->offset = buf[4];
+	ccd->offset = sign_extend32(ccd->offset, 9);
+
+	/* Integrator register CPCAP_REG_CCI */
+	if (ddata->vendor == CPCAP_VENDOR_TI)
+		ccd->integrator = sign_extend32(buf[6], 13);
+	else
+		ccd->integrator = (s16)buf[6];
+
+	return cpcap_battery_cc_to_uah(ddata,
+				       ccd->sample,
+				       ccd->accumulator,
+				       ccd->offset);
+}
+
+
+/*
+ * Based on the values from Motorola mapphone Linux kernel for the
+ * stock Droid 4 battery eb41. In the Motorola mapphone Linux
+ * kernel tree the value for pm_cd_factor is passed to the kernel
+ * via device tree. If it turns out to be something device specific
+ * we can consider that too later. These values are also fine for
+ * Bionic's hw4x.
+ *
+ * And looking at the battery full and shutdown values for the stock
+ * kernel on droid 4, full is 4351000 and software initiates shutdown
+ * at 3078000. The device will die around 2743000.
+ */
+static const struct cpcap_battery_config cpcap_battery_eb41_data = {
+	.cd_factor = 0x3cc,
+	.info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+	.info.voltage_max_design = 4351000,
+	.info.voltage_min_design = 3100000,
+	.info.charge_full_design = 1740000,
+	.bat.constant_charge_voltage_max_uv = 4200000,
+};
+
+/* Values for the extended Droid Bionic battery bw8x. */
+static const struct cpcap_battery_config cpcap_battery_bw8x_data = {
+	.cd_factor = 0x3cc,
+	.info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+	.info.voltage_max_design = 4200000,
+	.info.voltage_min_design = 3200000,
+	.info.charge_full_design = 2760000,
+	.bat.constant_charge_voltage_max_uv = 4200000,
+};
+
+/*
+ * Safe values for any lipo battery likely to fit into a mapphone
+ * battery bay.
+ */
+static const struct cpcap_battery_config cpcap_battery_unkown_data = {
+	.cd_factor = 0x3cc,
+	.info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+	.info.voltage_max_design = 4200000,
+	.info.voltage_min_design = 3200000,
+	.info.charge_full_design = 3000000,
+	.bat.constant_charge_voltage_max_uv = 4200000,
+};
+
+static int cpcap_battery_match_nvmem(struct device *dev, const void *data)
+{
+	if (strcmp(dev_name(dev), "89-500029ba0f73") == 0)
+		return 1;
+	else
+		return 0;
+}
+
+static void cpcap_battery_detect_battery_type(struct cpcap_battery_ddata *ddata)
+{
+	struct nvmem_device *nvmem;
+	u8 battery_id = 0;
+
+	ddata->check_nvmem = false;
+
+	nvmem = nvmem_device_find(NULL, &cpcap_battery_match_nvmem);
+	if (IS_ERR_OR_NULL(nvmem)) {
+		ddata->check_nvmem = true;
+		dev_info_once(ddata->dev, "Can not find battery nvmem device. Assuming generic lipo battery\n");
+	} else if (nvmem_device_read(nvmem, 2, 1, &battery_id) < 0) {
+		battery_id = 0;
+		ddata->check_nvmem = true;
+		dev_warn(ddata->dev, "Can not read battery nvmem device. Assuming generic lipo battery\n");
+	}
+
+	switch (battery_id) {
+	case CPCAP_BATTERY_EB41_HW4X_ID:
+		ddata->config = cpcap_battery_eb41_data;
+		break;
+	case CPCAP_BATTERY_BW8X_ID:
+		ddata->config = cpcap_battery_bw8x_data;
+		break;
+	default:
+		ddata->config = cpcap_battery_unkown_data;
+	}
+}
+
+/**
+ * cpcap_battery_cc_get_avg_current - read cpcap coulumb counter
+ * @ddata: cpcap battery driver device data
+ */
+static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata)
+{
+	int value, acc, error;
+	s32 sample;
+	s16 offset;
+
+	/* Coulomb counter integrator */
+	error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value);
+	if (error)
+		return error;
+
+	if (ddata->vendor == CPCAP_VENDOR_TI) {
+		acc = sign_extend32(value, 13);
+		sample = 1;
+	} else {
+		acc = (s16)value;
+		sample = 4;
+	}
+
+	/* Coulomb counter calibration offset  */
+	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+	if (error)
+		return error;
+
+	offset = sign_extend32(value, 9);
+
+	return cpcap_battery_cc_to_ua(ddata, sample, acc, offset);
+}
+
+static int cpcap_battery_get_charger_status(struct cpcap_battery_ddata *ddata,
+					    int *val)
+{
+	union power_supply_propval prop;
+	struct power_supply *charger;
+	int error;
+
+	charger = power_supply_get_by_name("usb");
+	if (!charger)
+		return -ENODEV;
+
+	error = power_supply_get_property(charger, POWER_SUPPLY_PROP_STATUS,
+					  &prop);
+	if (error)
+		*val = POWER_SUPPLY_STATUS_UNKNOWN;
+	else
+		*val = prop.intval;
+
+	power_supply_put(charger);
+
+	return error;
+}
+
+static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata)
+{
+	struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
+	unsigned int vfull;
+	int error, val;
+
+	error = cpcap_battery_get_charger_status(ddata, &val);
+	if (!error) {
+		switch (val) {
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+			dev_dbg(ddata->dev, "charger disconnected\n");
+			ddata->is_full = 0;
+			break;
+		case POWER_SUPPLY_STATUS_FULL:
+			dev_dbg(ddata->dev, "charger full status\n");
+			ddata->is_full = 1;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/*
+	 * The full battery voltage here can be inaccurate, it's used just to
+	 * filter out any trickle charging events. We clear the is_full status
+	 * on charger disconnect above anyways.
+	 */
+	vfull = ddata->config.bat.constant_charge_voltage_max_uv - 120000;
+
+	if (ddata->is_full && state->voltage < vfull)
+		ddata->is_full = 0;
+
+	return ddata->is_full;
+}
+
+static bool cpcap_battery_low(struct cpcap_battery_ddata *ddata)
+{
+	struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
+	static bool is_low;
+
+	if (state->current_ua > 0 && (state->voltage <= 3350000 || is_low))
+		is_low = true;
+	else
+		is_low = false;
+
+	return is_low;
+}
+
+static int cpcap_battery_update_status(struct cpcap_battery_ddata *ddata)
+{
+	struct cpcap_battery_state_data state, *latest, *previous,
+					*empty, *full;
+	ktime_t now;
+	int error;
+
+	memset(&state, 0, sizeof(state));
+	now = ktime_get();
+
+	latest = cpcap_battery_latest(ddata);
+	if (latest) {
+		s64 delta_ms = ktime_to_ms(ktime_sub(now, latest->time));
+
+		if (delta_ms < CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS)
+			return delta_ms;
+	}
+
+	state.time = now;
+	state.voltage = cpcap_battery_get_voltage(ddata);
+	state.current_ua = cpcap_battery_get_current(ddata);
+	state.counter_uah = cpcap_battery_read_accumulated(ddata, &state.cc);
+
+	error = cpcap_charger_battery_temperature(ddata,
+						  &state.temperature);
+	if (error)
+		return error;
+
+	previous = cpcap_battery_previous(ddata);
+	memcpy(previous, latest, sizeof(*previous));
+	memcpy(latest, &state, sizeof(*latest));
+
+	if (cpcap_battery_full(ddata)) {
+		full = cpcap_battery_get_full(ddata);
+		memcpy(full, latest, sizeof(*full));
+
+		empty = cpcap_battery_get_empty(ddata);
+		if (empty->voltage && empty->voltage != -1) {
+			empty->voltage = -1;
+			ddata->charge_full =
+				empty->counter_uah - full->counter_uah;
+		} else if (ddata->charge_full) {
+			empty->voltage = -1;
+			empty->counter_uah =
+				full->counter_uah + ddata->charge_full;
+		}
+	} else if (cpcap_battery_low(ddata)) {
+		empty = cpcap_battery_get_empty(ddata);
+		memcpy(empty, latest, sizeof(*empty));
+
+		full = cpcap_battery_get_full(ddata);
+		if (full->voltage) {
+			full->voltage = 0;
+			ddata->charge_full =
+				empty->counter_uah - full->counter_uah;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Update battery status when cpcap-charger calls power_supply_changed().
+ * This allows us to detect battery full condition before the charger
+ * disconnects.
+ */
+static void cpcap_battery_external_power_changed(struct power_supply *psy)
+{
+	union power_supply_propval prop;
+
+	power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, &prop);
+}
+
+static enum power_supply_property cpcap_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_POWER_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int cpcap_battery_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+	struct cpcap_battery_state_data *latest, *previous, *empty;
+	u32 sample;
+	s32 accumulator;
+	int cached;
+	s64 tmp;
+
+	cached = cpcap_battery_update_status(ddata);
+	if (cached < 0)
+		return cached;
+
+	latest = cpcap_battery_latest(ddata);
+	previous = cpcap_battery_previous(ddata);
+
+	if (ddata->check_nvmem)
+		cpcap_battery_detect_battery_type(ddata);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (latest->temperature > CPCAP_NO_BATTERY || ignore_temperature_probe)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (cpcap_battery_full(ddata)) {
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+			break;
+		}
+		if (cpcap_battery_cc_get_avg_current(ddata) < 0)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = ddata->config.info.technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = cpcap_battery_get_voltage(ddata);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = ddata->config.info.voltage_max_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = ddata->config.info.voltage_min_design;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->config.bat.constant_charge_voltage_max_uv;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		sample = latest->cc.sample - previous->cc.sample;
+		if (!sample) {
+			val->intval = cpcap_battery_cc_get_avg_current(ddata);
+			break;
+		}
+		accumulator = latest->cc.accumulator - previous->cc.accumulator;
+		val->intval = cpcap_battery_cc_to_ua(ddata, sample,
+						     accumulator,
+						     latest->cc.offset);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = latest->current_ua;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = latest->counter_uah;
+		break;
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		tmp = (latest->voltage / 10000) * latest->current_ua;
+		val->intval = div64_s64(tmp, 100);
+		break;
+	case POWER_SUPPLY_PROP_POWER_AVG:
+		sample = latest->cc.sample - previous->cc.sample;
+		if (!sample) {
+			tmp = cpcap_battery_cc_get_avg_current(ddata);
+			tmp *= (latest->voltage / 10000);
+			val->intval = div64_s64(tmp, 100);
+			break;
+		}
+		accumulator = latest->cc.accumulator - previous->cc.accumulator;
+		tmp = cpcap_battery_cc_to_ua(ddata, sample, accumulator,
+					     latest->cc.offset);
+		tmp *= ((latest->voltage + previous->voltage) / 20000);
+		val->intval = div64_s64(tmp, 100);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		empty = cpcap_battery_get_empty(ddata);
+		if (!empty->voltage || !ddata->charge_full)
+			return -ENODATA;
+		/* (ddata->charge_full / 200) is needed for rounding */
+		val->intval = empty->counter_uah - latest->counter_uah +
+			ddata->charge_full / 200;
+		val->intval = clamp(val->intval, 0, ddata->charge_full);
+		val->intval = val->intval * 100 / ddata->charge_full;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (cpcap_battery_full(ddata))
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (latest->voltage >= 3750000)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+		else if (latest->voltage >= 3300000)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		else if (latest->voltage > 3100000)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else if (latest->voltage <= 3100000)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		else
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		empty = cpcap_battery_get_empty(ddata);
+		if (!empty->voltage)
+			return -ENODATA;
+		val->intval = empty->counter_uah - latest->counter_uah;
+		if (val->intval < 0) {
+			/* Assume invalid config if CHARGE_NOW is -20% */
+			if (ddata->charge_full && abs(val->intval) > ddata->charge_full/5) {
+				empty->voltage = 0;
+				ddata->charge_full = 0;
+				return -ENODATA;
+			}
+			val->intval = 0;
+		} else if (ddata->charge_full && ddata->charge_full < val->intval) {
+			/* Assume invalid config if CHARGE_NOW exceeds CHARGE_FULL by 20% */
+			if (val->intval > (6*ddata->charge_full)/5) {
+				empty->voltage = 0;
+				ddata->charge_full = 0;
+				return -ENODATA;
+			}
+			val->intval = ddata->charge_full;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		if (!ddata->charge_full)
+			return -ENODATA;
+		val->intval = ddata->charge_full;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = ddata->config.info.charge_full_design;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (ignore_temperature_probe)
+			return -ENODATA;
+		val->intval = latest->temperature;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata,
+					int const_charge_voltage)
+{
+	union power_supply_propval prop;
+	union power_supply_propval val;
+	struct power_supply *charger;
+	int error;
+
+	charger = power_supply_get_by_name("usb");
+	if (!charger)
+		return -ENODEV;
+
+	error = power_supply_get_property(charger,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+	if (error)
+		goto out_put;
+
+	/* Allow charger const voltage lower than battery const voltage */
+	if (const_charge_voltage > prop.intval)
+		goto out_put;
+
+	val.intval = const_charge_voltage;
+
+	error = power_supply_set_property(charger,
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+			&val);
+out_put:
+	power_supply_put(charger);
+
+	return error;
+}
+
+static int cpcap_battery_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		if (val->intval < ddata->config.info.voltage_min_design)
+			return -EINVAL;
+		if (val->intval > ddata->config.info.voltage_max_design)
+			return -EINVAL;
+
+		ddata->config.bat.constant_charge_voltage_max_uv = val->intval;
+
+		return cpcap_battery_update_charger(ddata, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		if (val->intval < 0)
+			return -EINVAL;
+		if (val->intval > (6*ddata->config.info.charge_full_design)/5)
+			return -EINVAL;
+
+		ddata->charge_full = val->intval;
+
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_battery_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
+{
+	struct cpcap_battery_ddata *ddata = data;
+	struct cpcap_battery_state_data *latest;
+	struct cpcap_interrupt_desc *d;
+
+	if (!atomic_read(&ddata->active))
+		return IRQ_NONE;
+
+	list_for_each_entry(d, &ddata->irq_list, node) {
+		if (irq == d->irq)
+			break;
+	}
+
+	if (list_entry_is_head(d, &ddata->irq_list, node))
+		return IRQ_NONE;
+
+	latest = cpcap_battery_latest(ddata);
+
+	switch (d->action) {
+	case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE:
+		dev_info(ddata->dev, "Coulomb counter calibration done\n");
+		break;
+	case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
+		if (latest->current_ua >= 0)
+			dev_warn(ddata->dev, "Battery low at %imV!\n",
+				latest->voltage / 1000);
+		break;
+	case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
+		if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
+			dev_emerg(ddata->dev,
+				  "Battery empty at %imV, powering off\n",
+				  latest->voltage / 1000);
+			orderly_poweroff(true);
+		}
+		break;
+	default:
+		break;
+	}
+
+	power_supply_changed(ddata->psy);
+
+	return IRQ_HANDLED;
+}
+
+static int cpcap_battery_init_irq(struct platform_device *pdev,
+				  struct cpcap_battery_ddata *ddata,
+				  const char *name)
+{
+	struct cpcap_interrupt_desc *d;
+	int irq, error;
+
+	irq = platform_get_irq_byname(pdev, name);
+	if (irq < 0)
+		return irq;
+
+	error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+					  cpcap_battery_irq_thread,
+					  IRQF_SHARED | IRQF_ONESHOT,
+					  name, ddata);
+	if (error) {
+		dev_err(ddata->dev, "could not get irq %s: %i\n",
+			name, error);
+
+		return error;
+	}
+
+	d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->name = name;
+	d->irq = irq;
+
+	if (!strncmp(name, "cccal", 5))
+		d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE;
+	else if (!strncmp(name, "lowbph", 6))
+		d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW;
+	else if (!strncmp(name, "lowbpl", 6))
+		d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF;
+
+	list_add(&d->node, &ddata->irq_list);
+
+	return 0;
+}
+
+static int cpcap_battery_init_interrupts(struct platform_device *pdev,
+					 struct cpcap_battery_ddata *ddata)
+{
+	static const char * const cpcap_battery_irqs[] = {
+		"eol", "lowbph", "lowbpl",
+		"chrgcurr1", "battdetb"
+	};
+	int i, error;
+
+	for (i = 0; i < ARRAY_SIZE(cpcap_battery_irqs); i++) {
+		error = cpcap_battery_init_irq(pdev, ddata,
+					       cpcap_battery_irqs[i]);
+		if (error)
+			return error;
+	}
+
+	/* Enable calibration interrupt if already available in dts */
+	cpcap_battery_init_irq(pdev, ddata, "cccal");
+
+	/* Enable low battery interrupts for 3.3V high and 3.1V low */
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
+				   0xffff,
+				   CPCAP_REG_BPEOL_BIT_BATTDETEN);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata)
+{
+	const char * const names[CPCAP_BATTERY_IIO_NR] = {
+		"battdetb", "battp", "chg_isense", "batti",
+	};
+	int error, i;
+
+	for (i = 0; i < CPCAP_BATTERY_IIO_NR; i++) {
+		ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+							  names[i]);
+		if (IS_ERR(ddata->channels[i])) {
+			error = PTR_ERR(ddata->channels[i]);
+			goto out_err;
+		}
+
+		if (!ddata->channels[i]->indio_dev) {
+			error = -ENXIO;
+			goto out_err;
+		}
+	}
+
+	return 0;
+
+out_err:
+	return dev_err_probe(ddata->dev, error,
+			     "could not initialize VBUS or ID IIO\n");
+}
+
+/* Calibrate coulomb counter */
+static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata)
+{
+	int error, ccc1, value;
+	unsigned long timeout;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1);
+	if (error)
+		return error;
+
+	timeout = jiffies + msecs_to_jiffies(6000);
+
+	/* Start calibration */
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff,
+				   CPCAP_REG_CCC1_CAL_EN);
+	if (error)
+		goto restore;
+
+	while (time_before(jiffies, timeout)) {
+		error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value);
+		if (error)
+			goto restore;
+
+		if (!(value & CPCAP_REG_CCC1_CAL_EN))
+			break;
+
+		error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+		if (error)
+			goto restore;
+
+		msleep(300);
+	}
+
+	/* Read calibration offset from CCM */
+	error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+	if (error)
+		goto restore;
+
+	dev_info(ddata->dev, "calibration done: 0x%04x\n", value);
+
+restore:
+	if (error)
+		dev_err(ddata->dev, "%s: error %i\n", __func__, error);
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+				   0xffff, ccc1);
+	if (error)
+		dev_err(ddata->dev, "%s: restore error %i\n",
+			__func__, error);
+
+	return error;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_battery_id_table[] = {
+	{
+		.compatible = "motorola,cpcap-battery",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_battery_id_table);
+#endif
+
+static const struct power_supply_desc cpcap_charger_battery_desc = {
+	.name		= "battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= cpcap_battery_props,
+	.num_properties	= ARRAY_SIZE(cpcap_battery_props),
+	.get_property	= cpcap_battery_get_property,
+	.set_property	= cpcap_battery_set_property,
+	.property_is_writeable = cpcap_battery_property_is_writeable,
+	.external_power_changed = cpcap_battery_external_power_changed,
+};
+
+static int cpcap_battery_probe(struct platform_device *pdev)
+{
+	struct cpcap_battery_ddata *ddata;
+	struct power_supply_config psy_cfg = {};
+	int error;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	cpcap_battery_detect_battery_type(ddata);
+
+	INIT_LIST_HEAD(&ddata->irq_list);
+	ddata->dev = &pdev->dev;
+
+	ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor);
+	if (error)
+		return error;
+
+	switch (ddata->vendor) {
+	case CPCAP_VENDOR_ST:
+		ddata->cc_lsb = 95374;	/* μAms per LSB */
+		break;
+	case CPCAP_VENDOR_TI:
+		ddata->cc_lsb = 91501;	/* μAms per LSB */
+		break;
+	default:
+		return -EINVAL;
+	}
+	ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000;
+
+	platform_set_drvdata(pdev, ddata);
+
+	error = cpcap_battery_init_interrupts(pdev, ddata);
+	if (error)
+		return error;
+
+	error = cpcap_battery_init_iio(ddata);
+	if (error)
+		return error;
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = ddata;
+
+	ddata->psy = devm_power_supply_register(ddata->dev,
+						&cpcap_charger_battery_desc,
+						&psy_cfg);
+	error = PTR_ERR_OR_ZERO(ddata->psy);
+	if (error) {
+		dev_err(ddata->dev, "failed to register power supply\n");
+		return error;
+	}
+
+	atomic_set(&ddata->active, 1);
+
+	error = cpcap_battery_calibrate(ddata);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int cpcap_battery_remove(struct platform_device *pdev)
+{
+	struct cpcap_battery_ddata *ddata = platform_get_drvdata(pdev);
+	int error;
+
+	atomic_set(&ddata->active, 0);
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
+				   0xffff, 0);
+	if (error)
+		dev_err(&pdev->dev, "could not disable: %i\n", error);
+
+	return 0;
+}
+
+static struct platform_driver cpcap_battery_driver = {
+	.driver	= {
+		.name		= "cpcap_battery",
+		.of_match_table = of_match_ptr(cpcap_battery_id_table),
+	},
+	.probe	= cpcap_battery_probe,
+	.remove = cpcap_battery_remove,
+};
+module_platform_driver(cpcap_battery_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP PMIC Battery Driver");
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
new file mode 100644
index 000000000..be9764541
--- /dev/null
+++ b/drivers/power/supply/cpcap-charger.c
@@ -0,0 +1,990 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Motorola CPCAP PMIC battery charger driver
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Rewritten for Linux power framework with some parts based on
+ * earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * CPCAP_REG_CRM register bits. For documentation of somewhat similar hardware,
+ * see NXP "MC13783 Power Management and Audio Circuit Users's Guide"
+ * MC13783UG.pdf chapter "8.5 Battery Interface Register Summary". The registers
+ * and values for CPCAP are different, but some of the internal components seem
+ * similar. Also see the Motorola Linux kernel cpcap-regbits.h. CPCAP_REG_CHRGR_1
+ * bits that seem to describe the CRM register.
+ */
+#define CPCAP_REG_CRM_UNUSED_641_15	BIT(15)	/* 641 = register number */
+#define CPCAP_REG_CRM_UNUSED_641_14	BIT(14)	/* 641 = register number */
+#define CPCAP_REG_CRM_CHRG_LED_EN	BIT(13)	/* Charger LED */
+#define CPCAP_REG_CRM_RVRSMODE		BIT(12)	/* USB VBUS output enable */
+#define CPCAP_REG_CRM_ICHRG_TR1		BIT(11)	/* Trickle charge current */
+#define CPCAP_REG_CRM_ICHRG_TR0		BIT(10)
+#define CPCAP_REG_CRM_FET_OVRD		BIT(9)	/* 0 = hardware, 1 = FET_CTRL */
+#define CPCAP_REG_CRM_FET_CTRL		BIT(8)	/* BPFET 1 if FET_OVRD set */
+#define CPCAP_REG_CRM_VCHRG3		BIT(7)	/* Charge voltage bits */
+#define CPCAP_REG_CRM_VCHRG2		BIT(6)
+#define CPCAP_REG_CRM_VCHRG1		BIT(5)
+#define CPCAP_REG_CRM_VCHRG0		BIT(4)
+#define CPCAP_REG_CRM_ICHRG3		BIT(3)	/* Charge current bits */
+#define CPCAP_REG_CRM_ICHRG2		BIT(2)
+#define CPCAP_REG_CRM_ICHRG1		BIT(1)
+#define CPCAP_REG_CRM_ICHRG0		BIT(0)
+
+/* CPCAP_REG_CRM trickle charge voltages */
+#define CPCAP_REG_CRM_TR(val)		(((val) & 0x3) << 10)
+#define CPCAP_REG_CRM_TR_0A00		CPCAP_REG_CRM_TR(0x0)
+#define CPCAP_REG_CRM_TR_0A24		CPCAP_REG_CRM_TR(0x1)
+#define CPCAP_REG_CRM_TR_0A48		CPCAP_REG_CRM_TR(0x2)
+#define CPCAP_REG_CRM_TR_0A72		CPCAP_REG_CRM_TR(0x4)
+
+/*
+ * CPCAP_REG_CRM charge voltages based on the ADC channel 1 values.
+ * Note that these register bits don't match MC13783UG.pdf VCHRG
+ * register bits.
+ */
+#define CPCAP_REG_CRM_VCHRG(val)	(((val) & 0xf) << 4)
+#define CPCAP_REG_CRM_VCHRG_3V80	CPCAP_REG_CRM_VCHRG(0x0)
+#define CPCAP_REG_CRM_VCHRG_4V10	CPCAP_REG_CRM_VCHRG(0x1)
+#define CPCAP_REG_CRM_VCHRG_4V12	CPCAP_REG_CRM_VCHRG(0x2)
+#define CPCAP_REG_CRM_VCHRG_4V15	CPCAP_REG_CRM_VCHRG(0x3)
+#define CPCAP_REG_CRM_VCHRG_4V17	CPCAP_REG_CRM_VCHRG(0x4)
+#define CPCAP_REG_CRM_VCHRG_4V20	CPCAP_REG_CRM_VCHRG(0x5)
+#define CPCAP_REG_CRM_VCHRG_4V23	CPCAP_REG_CRM_VCHRG(0x6)
+#define CPCAP_REG_CRM_VCHRG_4V25	CPCAP_REG_CRM_VCHRG(0x7)
+#define CPCAP_REG_CRM_VCHRG_4V27	CPCAP_REG_CRM_VCHRG(0x8)
+#define CPCAP_REG_CRM_VCHRG_4V30	CPCAP_REG_CRM_VCHRG(0x9)
+#define CPCAP_REG_CRM_VCHRG_4V33	CPCAP_REG_CRM_VCHRG(0xa)
+#define CPCAP_REG_CRM_VCHRG_4V35	CPCAP_REG_CRM_VCHRG(0xb)
+#define CPCAP_REG_CRM_VCHRG_4V38	CPCAP_REG_CRM_VCHRG(0xc)
+#define CPCAP_REG_CRM_VCHRG_4V40	CPCAP_REG_CRM_VCHRG(0xd)
+#define CPCAP_REG_CRM_VCHRG_4V42	CPCAP_REG_CRM_VCHRG(0xe)
+#define CPCAP_REG_CRM_VCHRG_4V44	CPCAP_REG_CRM_VCHRG(0xf)
+
+/*
+ * CPCAP_REG_CRM charge currents. These seem to match MC13783UG.pdf
+ * values in "Table 8-3. Charge Path Regulator Current Limit
+ * Characteristics" for the nominal values.
+ *
+ * Except 70mA and 1.596A and unlimited, these are simply 88.7mA / step.
+ */
+#define CPCAP_REG_CRM_ICHRG(val)	(((val) & 0xf) << 0)
+#define CPCAP_REG_CRM_ICHRG_0A000	CPCAP_REG_CRM_ICHRG(0x0)
+#define CPCAP_REG_CRM_ICHRG_0A070	CPCAP_REG_CRM_ICHRG(0x1)
+#define CPCAP_REG_CRM_ICHRG_0A177	CPCAP_REG_CRM_ICHRG(0x2)
+#define CPCAP_REG_CRM_ICHRG_0A266	CPCAP_REG_CRM_ICHRG(0x3)
+#define CPCAP_REG_CRM_ICHRG_0A355	CPCAP_REG_CRM_ICHRG(0x4)
+#define CPCAP_REG_CRM_ICHRG_0A443	CPCAP_REG_CRM_ICHRG(0x5)
+#define CPCAP_REG_CRM_ICHRG_0A532	CPCAP_REG_CRM_ICHRG(0x6)
+#define CPCAP_REG_CRM_ICHRG_0A621	CPCAP_REG_CRM_ICHRG(0x7)
+#define CPCAP_REG_CRM_ICHRG_0A709	CPCAP_REG_CRM_ICHRG(0x8)
+#define CPCAP_REG_CRM_ICHRG_0A798	CPCAP_REG_CRM_ICHRG(0x9)
+#define CPCAP_REG_CRM_ICHRG_0A886	CPCAP_REG_CRM_ICHRG(0xa)
+#define CPCAP_REG_CRM_ICHRG_0A975	CPCAP_REG_CRM_ICHRG(0xb)
+#define CPCAP_REG_CRM_ICHRG_1A064	CPCAP_REG_CRM_ICHRG(0xc)
+#define CPCAP_REG_CRM_ICHRG_1A152	CPCAP_REG_CRM_ICHRG(0xd)
+#define CPCAP_REG_CRM_ICHRG_1A596	CPCAP_REG_CRM_ICHRG(0xe)
+#define CPCAP_REG_CRM_ICHRG_NO_LIMIT	CPCAP_REG_CRM_ICHRG(0xf)
+
+/* CPCAP_REG_VUSBC register bits needed for VBUS */
+#define CPCAP_BIT_VBUS_SWITCH		BIT(0)	/* VBUS boost to 5V */
+
+enum {
+	CPCAP_CHARGER_IIO_BATTDET,
+	CPCAP_CHARGER_IIO_VOLTAGE,
+	CPCAP_CHARGER_IIO_VBUS,
+	CPCAP_CHARGER_IIO_CHRG_CURRENT,
+	CPCAP_CHARGER_IIO_BATT_CURRENT,
+	CPCAP_CHARGER_IIO_NR,
+};
+
+struct cpcap_charger_ddata {
+	struct device *dev;
+	struct regmap *reg;
+	struct list_head irq_list;
+	struct delayed_work detect_work;
+	struct delayed_work vbus_work;
+	struct gpio_desc *gpio[2];		/* gpio_reven0 & 1 */
+
+	struct iio_channel *channels[CPCAP_CHARGER_IIO_NR];
+
+	struct power_supply *usb;
+
+	struct phy_companion comparator;	/* For USB VBUS */
+	unsigned int vbus_enabled:1;
+	unsigned int feeding_vbus:1;
+	atomic_t active;
+
+	int status;
+	int voltage;
+	int limit_current;
+};
+
+struct cpcap_interrupt_desc {
+	int irq;
+	struct list_head node;
+	const char *name;
+};
+
+struct cpcap_charger_ints_state {
+	bool chrg_det;
+	bool rvrs_chrg;
+	bool vbusov;
+
+	bool chrg_se1b;
+	bool rvrs_mode;
+	bool chrgcurr2;
+	bool chrgcurr1;
+	bool vbusvld;
+
+	bool battdetb;
+};
+
+static enum power_supply_property cpcap_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value;
+}
+
+static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata)
+{
+	struct iio_channel *channel;
+	int error, value = 0;
+
+	channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT];
+	error = iio_read_channel_processed(channel, &value);
+	if (error < 0) {
+		dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+		return 0;
+	}
+
+	return value;
+}
+
+static int cpcap_charger_get_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = ddata->status;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		val->intval = ddata->limit_current;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		val->intval = ddata->voltage;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = cpcap_charger_get_charge_voltage(ddata) *
+				1000;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = cpcap_charger_get_charge_current(ddata) *
+				1000;
+		else
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_charger_match_voltage(int voltage)
+{
+	switch (voltage) {
+	case 0 ... 4100000 - 1: return 3800000;
+	case 4100000 ... 4120000 - 1: return 4100000;
+	case 4120000 ... 4150000 - 1: return 4120000;
+	case 4150000 ... 4170000 - 1: return 4150000;
+	case 4170000 ... 4200000 - 1: return 4170000;
+	case 4200000 ... 4230000 - 1: return 4200000;
+	case 4230000 ... 4250000 - 1: return 4230000;
+	case 4250000 ... 4270000 - 1: return 4250000;
+	case 4270000 ... 4300000 - 1: return 4270000;
+	case 4300000 ... 4330000 - 1: return 4300000;
+	case 4330000 ... 4350000 - 1: return 4330000;
+	case 4350000 ... 4380000 - 1: return 4350000;
+	case 4380000 ... 4400000 - 1: return 4380000;
+	case 4400000 ... 4420000 - 1: return 4400000;
+	case 4420000 ... 4440000 - 1: return 4420000;
+	case 4440000: return 4440000;
+	default: return 0;
+	}
+}
+
+static int
+cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+	union power_supply_propval prop;
+	struct power_supply *battery;
+	int voltage = ddata->voltage;
+	int error;
+
+	battery = power_supply_get_by_name("battery");
+	if (battery) {
+		error = power_supply_get_property(battery,
+				POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+				&prop);
+		if (!error)
+			voltage = prop.intval;
+
+		power_supply_put(battery);
+	}
+
+	return voltage;
+}
+
+static int cpcap_charger_current_to_regval(int microamp)
+{
+	int miliamp = microamp / 1000;
+	int res;
+
+	if (miliamp < 0)
+		return -EINVAL;
+	if (miliamp < 70)
+		return CPCAP_REG_CRM_ICHRG(0x0);
+	if (miliamp < 177)
+		return CPCAP_REG_CRM_ICHRG(0x1);
+	if (miliamp >= 1596)
+		return CPCAP_REG_CRM_ICHRG(0xe);
+
+	res = microamp / 88666;
+	if (res > 0xd)
+		res = 0xd;
+	return CPCAP_REG_CRM_ICHRG(res);
+}
+
+static int cpcap_charger_set_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      const union power_supply_propval *val)
+{
+	struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+	int voltage, batvolt;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (cpcap_charger_current_to_regval(val->intval) < 0)
+			return -EINVAL;
+		ddata->limit_current = val->intval;
+		schedule_delayed_work(&ddata->detect_work, 0);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		voltage = cpcap_charger_match_voltage(val->intval);
+		batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata);
+		if (voltage > batvolt)
+			voltage = batvolt;
+		ddata->voltage = voltage;
+		schedule_delayed_work(&ddata->detect_work, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cpcap_charger_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
+					 bool enabled)
+{
+	if (!ddata->gpio[0])
+		return;
+
+	gpiod_set_value(ddata->gpio[0], enabled);
+}
+
+static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata,
+					     bool enabled)
+{
+	if (!ddata->gpio[1])
+		return;
+
+	gpiod_set_value(ddata->gpio[1], enabled);
+}
+
+static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata,
+				       int state)
+{
+	const char *status;
+
+	if (state > POWER_SUPPLY_STATUS_FULL) {
+		dev_warn(ddata->dev, "unknown state: %i\n", state);
+
+		return;
+	}
+
+	ddata->status = state;
+
+	switch (state) {
+	case POWER_SUPPLY_STATUS_DISCHARGING:
+		status = "DISCONNECTED";
+		break;
+	case POWER_SUPPLY_STATUS_NOT_CHARGING:
+		status = "DETECTING";
+		break;
+	case POWER_SUPPLY_STATUS_CHARGING:
+		status = "CHARGING";
+		break;
+	case POWER_SUPPLY_STATUS_FULL:
+		status = "DONE";
+		break;
+	default:
+		return;
+	}
+
+	dev_dbg(ddata->dev, "state: %s\n", status);
+}
+
+static int cpcap_charger_disable(struct cpcap_charger_ddata *ddata)
+{
+	int error;
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff,
+				   CPCAP_REG_CRM_FET_OVRD |
+				   CPCAP_REG_CRM_FET_CTRL);
+	if (error)
+		dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+	return error;
+}
+
+static int cpcap_charger_enable(struct cpcap_charger_ddata *ddata,
+				int max_voltage, int charge_current,
+				int trickle_current)
+{
+	int error;
+
+	if (!max_voltage || !charge_current)
+		return -EINVAL;
+
+	dev_dbg(ddata->dev, "enable: %i %i %i\n",
+		max_voltage, charge_current, trickle_current);
+
+	error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff,
+				   CPCAP_REG_CRM_CHRG_LED_EN |
+				   trickle_current |
+				   CPCAP_REG_CRM_FET_OVRD |
+				   CPCAP_REG_CRM_FET_CTRL |
+				   max_voltage |
+				   charge_current);
+	if (error)
+		dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+	return error;
+}
+
+static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
+{
+	int error, value = 0;
+	struct iio_channel *channel =
+		ddata->channels[CPCAP_CHARGER_IIO_VBUS];
+
+	error = iio_read_channel_processed(channel, &value);
+	if (error >= 0)
+		return value > 3900;
+
+	dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+	return false;
+}
+
+/* VBUS control functions for the USB PHY companion */
+static void cpcap_charger_vbus_work(struct work_struct *work)
+{
+	struct cpcap_charger_ddata *ddata;
+	bool vbus = false;
+	int error;
+
+	ddata = container_of(work, struct cpcap_charger_ddata,
+			     vbus_work.work);
+
+	if (ddata->vbus_enabled) {
+		vbus = cpcap_charger_vbus_valid(ddata);
+		if (vbus) {
+			dev_dbg(ddata->dev, "VBUS already provided\n");
+
+			return;
+		}
+
+		ddata->feeding_vbus = true;
+		cpcap_charger_set_cable_path(ddata, false);
+		cpcap_charger_set_inductive_path(ddata, false);
+
+		error = cpcap_charger_disable(ddata);
+		if (error)
+			goto out_err;
+
+		cpcap_charger_update_state(ddata,
+					   POWER_SUPPLY_STATUS_DISCHARGING);
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH,
+					   CPCAP_BIT_VBUS_SWITCH);
+		if (error)
+			goto out_err;
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+					   CPCAP_REG_CRM_RVRSMODE,
+					   CPCAP_REG_CRM_RVRSMODE);
+		if (error)
+			goto out_err;
+	} else {
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+					   CPCAP_BIT_VBUS_SWITCH, 0);
+		if (error)
+			goto out_err;
+
+		error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+					   CPCAP_REG_CRM_RVRSMODE, 0);
+		if (error)
+			goto out_err;
+
+		cpcap_charger_set_cable_path(ddata, true);
+		cpcap_charger_set_inductive_path(ddata, true);
+		ddata->feeding_vbus = false;
+	}
+
+	return;
+
+out_err:
+	cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN);
+	dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__,
+		ddata->vbus_enabled ? "enable" : "disable", error);
+}
+
+static int cpcap_charger_set_vbus(struct phy_companion *comparator,
+				  bool enabled)
+{
+	struct cpcap_charger_ddata *ddata =
+		container_of(comparator, struct cpcap_charger_ddata,
+			     comparator);
+
+	ddata->vbus_enabled = enabled;
+	schedule_delayed_work(&ddata->vbus_work, 0);
+
+	return 0;
+}
+
+/* Charger interrupt handling functions */
+
+static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
+					struct cpcap_charger_ints_state *s)
+{
+	int val, error;
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+	if (error)
+		return error;
+
+	s->chrg_det = val & BIT(13);
+	s->rvrs_chrg = val & BIT(12);
+	s->vbusov = val & BIT(11);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+	if (error)
+		return error;
+
+	s->chrg_se1b = val & BIT(13);
+	s->rvrs_mode = val & BIT(6);
+	s->chrgcurr2 = val & BIT(5);
+	s->chrgcurr1 = val & BIT(4);
+	s->vbusvld = val & BIT(3);
+
+	error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+	if (error)
+		return error;
+
+	s->battdetb = val & BIT(6);
+
+	return 0;
+}
+
+static int cpcap_charger_voltage_to_regval(int voltage)
+{
+	int offset;
+
+	switch (voltage) {
+	case 0 ... 4100000 - 1:
+		return 0;
+	case 4100000 ... 4200000 - 1:
+		offset = 1;
+		break;
+	case 4200000 ... 4300000 - 1:
+		offset = 0;
+		break;
+	case 4300000 ... 4380000 - 1:
+		offset = -1;
+		break;
+	case 4380000 ... 4440000:
+		offset = -2;
+		break;
+	default:
+		return 0;
+	}
+
+	return ((voltage - 4100000) / 20000) + offset;
+}
+
+static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata,
+				     int state, unsigned long delay)
+{
+	int error;
+
+	/* Update battery state before disconnecting the charger */
+	switch (state) {
+	case POWER_SUPPLY_STATUS_DISCHARGING:
+	case POWER_SUPPLY_STATUS_FULL:
+		power_supply_changed(ddata->usb);
+		break;
+	default:
+		break;
+	}
+
+	error = cpcap_charger_disable(ddata);
+	if (error) {
+		cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN);
+		return;
+	}
+
+	cpcap_charger_update_state(ddata, state);
+	power_supply_changed(ddata->usb);
+	schedule_delayed_work(&ddata->detect_work, delay);
+}
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+	struct cpcap_charger_ddata *ddata;
+	struct cpcap_charger_ints_state s;
+	int error, new_state;
+
+	ddata = container_of(work, struct cpcap_charger_ddata,
+			     detect_work.work);
+
+	error = cpcap_charger_get_ints_state(ddata, &s);
+	if (error)
+		return;
+
+	/* Just init the state if a charger is connected with no chrg_det set */
+	if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) {
+		cpcap_charger_update_state(ddata,
+					   POWER_SUPPLY_STATUS_NOT_CHARGING);
+
+		return;
+	}
+
+	/*
+	 * If battery voltage is higher than charge voltage, it may have been
+	 * charged to 4.35V by Android. Try again in 10 minutes.
+	 */
+	if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) {
+		cpcap_charger_disconnect(ddata,
+					 POWER_SUPPLY_STATUS_NOT_CHARGING,
+					 HZ * 60 * 10);
+
+		return;
+	}
+
+	/* Delay for 80ms to avoid vbus bouncing when usb cable is plugged in */
+	usleep_range(80000, 120000);
+
+	/* Throttle chrgcurr2 interrupt for charger done and retry */
+	switch (ddata->status) {
+	case POWER_SUPPLY_STATUS_CHARGING:
+		if (s.chrgcurr2)
+			break;
+		new_state = POWER_SUPPLY_STATUS_FULL;
+
+		if (s.chrgcurr1 && s.vbusvld) {
+			cpcap_charger_disconnect(ddata, new_state, HZ * 5);
+			return;
+		}
+		break;
+	case POWER_SUPPLY_STATUS_FULL:
+		if (!s.chrgcurr2)
+			break;
+		if (s.vbusvld)
+			new_state = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else
+			new_state = POWER_SUPPLY_STATUS_DISCHARGING;
+
+		cpcap_charger_disconnect(ddata, new_state, HZ * 5);
+
+		return;
+	default:
+		break;
+	}
+
+	if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
+	    s.chrgcurr1) {
+		int max_current;
+		int vchrg, ichrg;
+		union power_supply_propval val;
+		struct power_supply *battery;
+
+		battery = power_supply_get_by_name("battery");
+		if (IS_ERR_OR_NULL(battery)) {
+			dev_err(ddata->dev, "battery power_supply not available %li\n",
+					PTR_ERR(battery));
+			return;
+		}
+
+		error = power_supply_get_property(battery, POWER_SUPPLY_PROP_PRESENT, &val);
+		power_supply_put(battery);
+		if (error)
+			goto out_err;
+
+		if (val.intval) {
+			max_current = 1596000;
+		} else {
+			dev_info(ddata->dev, "battery not inserted, charging disabled\n");
+			max_current = 0;
+		}
+
+		if (max_current > ddata->limit_current)
+			max_current = ddata->limit_current;
+
+		ichrg = cpcap_charger_current_to_regval(max_current);
+		vchrg = cpcap_charger_voltage_to_regval(ddata->voltage);
+		error = cpcap_charger_enable(ddata,
+					     CPCAP_REG_CRM_VCHRG(vchrg),
+					     ichrg, 0);
+		if (error)
+			goto out_err;
+		cpcap_charger_update_state(ddata,
+					   POWER_SUPPLY_STATUS_CHARGING);
+	} else {
+		error = cpcap_charger_disable(ddata);
+		if (error)
+			goto out_err;
+		cpcap_charger_update_state(ddata,
+					   POWER_SUPPLY_STATUS_DISCHARGING);
+	}
+
+	power_supply_changed(ddata->usb);
+	return;
+
+out_err:
+	cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN);
+	dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+}
+
+static irqreturn_t cpcap_charger_irq_thread(int irq, void *data)
+{
+	struct cpcap_charger_ddata *ddata = data;
+
+	if (!atomic_read(&ddata->active))
+		return IRQ_NONE;
+
+	schedule_delayed_work(&ddata->detect_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+			      struct cpcap_charger_ddata *ddata,
+			      const char *name)
+{
+	struct cpcap_interrupt_desc *d;
+	int irq, error;
+
+	irq = platform_get_irq_byname(pdev, name);
+	if (irq < 0)
+		return -ENODEV;
+
+	error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+					  cpcap_charger_irq_thread,
+					  IRQF_SHARED | IRQF_ONESHOT,
+					  name, ddata);
+	if (error) {
+		dev_err(ddata->dev, "could not get irq %s: %i\n",
+			name, error);
+
+		return error;
+	}
+
+	d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	d->name = name;
+	d->irq = irq;
+	list_add(&d->node, &ddata->irq_list);
+
+	return 0;
+}
+
+static const char * const cpcap_charger_irqs[] = {
+	/* REG_INT_0 */
+	"chrg_det", "rvrs_chrg",
+
+	/* REG_INT1 */
+	"chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+
+	/* REG_INT_3 */
+	"battdetb",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+				     struct cpcap_charger_ddata *ddata)
+{
+	int i, error;
+
+	for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) {
+		error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]);
+		if (error)
+			return error;
+	}
+
+	return 0;
+}
+
+static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+						      i, GPIOD_OUT_HIGH);
+		if (IS_ERR(ddata->gpio[i])) {
+			dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+				 i, PTR_ERR(ddata->gpio[i]));
+			ddata->gpio[i] = NULL;
+		}
+	}
+}
+
+static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata)
+{
+	const char * const names[CPCAP_CHARGER_IIO_NR] = {
+		"battdetb", "battp", "vbus", "chg_isense", "batti",
+	};
+	int error, i;
+
+	for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) {
+		ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+							  names[i]);
+		if (IS_ERR(ddata->channels[i])) {
+			error = PTR_ERR(ddata->channels[i]);
+			goto out_err;
+		}
+
+		if (!ddata->channels[i]->indio_dev) {
+			error = -ENXIO;
+			goto out_err;
+		}
+	}
+
+	return 0;
+
+out_err:
+	if (error != -EPROBE_DEFER)
+		dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+			error);
+
+	return error;
+}
+
+static char *cpcap_charger_supplied_to[] = {
+	"battery",
+};
+
+static const struct power_supply_desc cpcap_charger_usb_desc = {
+	.name		= "usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= cpcap_charger_props,
+	.num_properties	= ARRAY_SIZE(cpcap_charger_props),
+	.get_property	= cpcap_charger_get_property,
+	.set_property	= cpcap_charger_set_property,
+	.property_is_writeable = cpcap_charger_property_is_writeable,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_charger_id_table[] = {
+	{
+		.compatible = "motorola,mapphone-cpcap-charger",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpcap_charger_id_table);
+#endif
+
+static int cpcap_charger_probe(struct platform_device *pdev)
+{
+	struct cpcap_charger_ddata *ddata;
+	const struct of_device_id *of_id;
+	struct power_supply_config psy_cfg = {};
+	int error;
+
+	of_id = of_match_device(of_match_ptr(cpcap_charger_id_table),
+				&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->dev = &pdev->dev;
+	ddata->voltage = 4200000;
+	ddata->limit_current = 532000;
+
+	ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+	if (!ddata->reg)
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&ddata->irq_list);
+	INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+	INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work);
+	platform_set_drvdata(pdev, ddata);
+
+	error = cpcap_charger_init_iio(ddata);
+	if (error)
+		return error;
+
+	atomic_set(&ddata->active, 1);
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = ddata;
+	psy_cfg.supplied_to = cpcap_charger_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(cpcap_charger_supplied_to),
+
+	ddata->usb = devm_power_supply_register(ddata->dev,
+						&cpcap_charger_usb_desc,
+						&psy_cfg);
+	if (IS_ERR(ddata->usb)) {
+		error = PTR_ERR(ddata->usb);
+		dev_err(ddata->dev, "failed to register USB charger: %i\n",
+			error);
+
+		return error;
+	}
+
+	error = cpcap_usb_init_interrupts(pdev, ddata);
+	if (error)
+		return error;
+
+	ddata->comparator.set_vbus = cpcap_charger_set_vbus;
+	error = omap_usb2_set_comparator(&ddata->comparator);
+	if (error == -ENODEV) {
+		dev_info(ddata->dev, "charger needs phy, deferring probe\n");
+		return -EPROBE_DEFER;
+	}
+
+	cpcap_charger_init_optional_gpios(ddata);
+
+	schedule_delayed_work(&ddata->detect_work, 0);
+
+	return 0;
+}
+
+static void cpcap_charger_shutdown(struct platform_device *pdev)
+{
+	struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev);
+	int error;
+
+	atomic_set(&ddata->active, 0);
+	error = omap_usb2_set_comparator(NULL);
+	if (error)
+		dev_warn(ddata->dev, "could not clear USB comparator: %i\n",
+			 error);
+
+	error = cpcap_charger_disable(ddata);
+	if (error) {
+		cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN);
+		dev_warn(ddata->dev, "could not clear charger: %i\n",
+			 error);
+	}
+	cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_DISCHARGING);
+	cancel_delayed_work_sync(&ddata->vbus_work);
+	cancel_delayed_work_sync(&ddata->detect_work);
+}
+
+static int cpcap_charger_remove(struct platform_device *pdev)
+{
+	cpcap_charger_shutdown(pdev);
+
+	return 0;
+}
+
+static struct platform_driver cpcap_charger_driver = {
+	.probe = cpcap_charger_probe,
+	.driver	= {
+		.name	= "cpcap-charger",
+		.of_match_table = of_match_ptr(cpcap_charger_id_table),
+	},
+	.shutdown = cpcap_charger_shutdown,
+	.remove	= cpcap_charger_remove,
+};
+module_platform_driver(cpcap_charger_driver);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cpcap-charger");
diff --git a/drivers/power/supply/cros_peripheral_charger.c b/drivers/power/supply/cros_peripheral_charger.c
new file mode 100644
index 000000000..1379afd96
--- /dev/null
+++ b/drivers/power/supply/cros_peripheral_charger.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power supply driver for ChromeOS EC based Peripheral Device Charger.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#define DRV_NAME		"cros-ec-pchg"
+#define PCHG_DIR_PREFIX		"peripheral"
+#define PCHG_DIR_NAME		PCHG_DIR_PREFIX "%d"
+#define PCHG_DIR_NAME_LENGTH \
+		sizeof(PCHG_DIR_PREFIX __stringify(EC_PCHG_MAX_PORTS))
+#define PCHG_CACHE_UPDATE_DELAY	msecs_to_jiffies(500)
+
+struct port_data {
+	int port_number;
+	char name[PCHG_DIR_NAME_LENGTH];
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	int psy_status;
+	int battery_percentage;
+	int charge_type;
+	struct charger_data *charger;
+	unsigned long last_update;
+};
+
+struct charger_data {
+	struct device *dev;
+	struct cros_ec_dev *ec_dev;
+	struct cros_ec_device *ec_device;
+	int num_registered_psy;
+	struct port_data *ports[EC_PCHG_MAX_PORTS];
+	struct notifier_block notifier;
+};
+
+static enum power_supply_property cros_pchg_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static int cros_pchg_ec_command(const struct charger_data *charger,
+				unsigned int version,
+				unsigned int command,
+				const void *outdata,
+				unsigned int outsize,
+				void *indata,
+				unsigned int insize)
+{
+	struct cros_ec_dev *ec_dev = charger->ec_dev;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = ec_dev->cmd_offset + command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+static const unsigned int pchg_cmd_version = 1;
+
+static bool cros_pchg_cmd_ver_check(const struct charger_data *charger)
+{
+	struct ec_params_get_cmd_versions_v1 req;
+	struct ec_response_get_cmd_versions rsp;
+	int ret;
+
+	req.cmd = EC_CMD_PCHG;
+	ret = cros_pchg_ec_command(charger, 1, EC_CMD_GET_CMD_VERSIONS,
+				   &req, sizeof(req), &rsp, sizeof(rsp));
+	if (ret < 0) {
+		dev_warn(charger->dev,
+			 "Unable to get versions of EC_CMD_PCHG (err:%d)\n",
+			 ret);
+		return false;
+	}
+
+	return !!(rsp.version_mask & BIT(pchg_cmd_version));
+}
+
+static int cros_pchg_port_count(const struct charger_data *charger)
+{
+	struct ec_response_pchg_count rsp;
+	int ret;
+
+	ret = cros_pchg_ec_command(charger, 0, EC_CMD_PCHG_COUNT,
+				   NULL, 0, &rsp, sizeof(rsp));
+	if (ret < 0) {
+		dev_warn(charger->dev,
+			 "Unable to get number or ports (err:%d)\n", ret);
+		return ret;
+	}
+
+	return rsp.port_count;
+}
+
+static int cros_pchg_get_status(struct port_data *port)
+{
+	struct charger_data *charger = port->charger;
+	struct ec_params_pchg req;
+	struct ec_response_pchg rsp;
+	struct device *dev = charger->dev;
+	int old_status = port->psy_status;
+	int old_percentage = port->battery_percentage;
+	int ret;
+
+	req.port = port->port_number;
+	ret = cros_pchg_ec_command(charger, pchg_cmd_version, EC_CMD_PCHG,
+				   &req, sizeof(req), &rsp, sizeof(rsp));
+	if (ret < 0) {
+		dev_err(dev, "Unable to get port.%d status (err:%d)\n",
+			port->port_number, ret);
+		return ret;
+	}
+
+	switch (rsp.state) {
+	case PCHG_STATE_RESET:
+	case PCHG_STATE_INITIALIZED:
+	case PCHG_STATE_ENABLED:
+	default:
+		port->psy_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		port->charge_type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case PCHG_STATE_DETECTED:
+		port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+		port->charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case PCHG_STATE_CHARGING:
+		port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+		port->charge_type = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+		break;
+	case PCHG_STATE_FULL:
+		port->psy_status = POWER_SUPPLY_STATUS_FULL;
+		port->charge_type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	port->battery_percentage = rsp.battery_percentage;
+
+	if (port->psy_status != old_status ||
+			port->battery_percentage != old_percentage)
+		power_supply_changed(port->psy);
+
+	dev_dbg(dev,
+		"Port %d: state=%d battery=%d%%\n",
+		port->port_number, rsp.state, rsp.battery_percentage);
+
+	return 0;
+}
+
+static int cros_pchg_get_port_status(struct port_data *port, bool ratelimit)
+{
+	int ret;
+
+	if (ratelimit &&
+	    time_is_after_jiffies(port->last_update + PCHG_CACHE_UPDATE_DELAY))
+		return 0;
+
+	ret = cros_pchg_get_status(port);
+	if (ret < 0)
+		return ret;
+
+	port->last_update = jiffies;
+
+	return ret;
+}
+
+static int cros_pchg_get_prop(struct power_supply *psy,
+			      enum power_supply_property psp,
+			      union power_supply_propval *val)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_CAPACITY:
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		cros_pchg_get_port_status(port, true);
+		break;
+	default:
+		break;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = port->psy_status;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = port->battery_percentage;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = port->charge_type;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cros_pchg_event(const struct charger_data *charger,
+			   unsigned long host_event)
+{
+	int i;
+
+	for (i = 0; i < charger->num_registered_psy; i++)
+		cros_pchg_get_port_status(charger->ports[i], false);
+
+	return NOTIFY_OK;
+}
+
+static int cros_ec_notify(struct notifier_block *nb,
+			  unsigned long queued_during_suspend,
+			  void *data)
+{
+	struct cros_ec_device *ec_dev = data;
+	struct charger_data *charger =
+			container_of(nb, struct charger_data, notifier);
+	u32 host_event;
+
+	if (ec_dev->event_data.event_type != EC_MKBP_EVENT_PCHG ||
+			ec_dev->event_size != sizeof(host_event))
+		return NOTIFY_DONE;
+
+	host_event = get_unaligned_le32(&ec_dev->event_data.data.host_event);
+
+	if (!(host_event & EC_MKBP_PCHG_DEVICE_EVENT))
+		return NOTIFY_DONE;
+
+	return cros_pchg_event(charger, host_event);
+}
+
+static int cros_pchg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
+	struct cros_ec_device *ec_device = ec_dev->ec_dev;
+	struct power_supply_desc *psy_desc;
+	struct charger_data *charger;
+	struct power_supply *psy;
+	struct port_data *port;
+	struct notifier_block *nb;
+	int num_ports;
+	int ret;
+	int i;
+
+	charger = devm_kzalloc(dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->dev = dev;
+	charger->ec_dev = ec_dev;
+	charger->ec_device = ec_device;
+
+	ret = cros_pchg_port_count(charger);
+	if (ret <= 0) {
+		/*
+		 * This feature is enabled by the EC and the kernel driver is
+		 * included by default for CrOS devices. Don't need to be loud
+		 * since this error can be normal.
+		 */
+		dev_info(dev, "No peripheral charge ports (err:%d)\n", ret);
+		return -ENODEV;
+	}
+
+	if (!cros_pchg_cmd_ver_check(charger)) {
+		dev_err(dev, "EC_CMD_PCHG version %d isn't available.\n",
+			pchg_cmd_version);
+		return -EOPNOTSUPP;
+	}
+
+	num_ports = ret;
+	if (num_ports > EC_PCHG_MAX_PORTS) {
+		dev_err(dev, "Too many peripheral charge ports (%d)\n",
+			num_ports);
+		return -ENOBUFS;
+	}
+
+	dev_info(dev, "%d peripheral charge ports found\n", num_ports);
+
+	for (i = 0; i < num_ports; i++) {
+		struct power_supply_config psy_cfg = {};
+
+		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+		if (!port)
+			return -ENOMEM;
+
+		port->charger = charger;
+		port->port_number = i;
+		snprintf(port->name, sizeof(port->name), PCHG_DIR_NAME, i);
+
+		psy_desc = &port->psy_desc;
+		psy_desc->name = port->name;
+		psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+		psy_desc->get_property = cros_pchg_get_prop;
+		psy_desc->external_power_changed = NULL;
+		psy_desc->properties = cros_pchg_props;
+		psy_desc->num_properties = ARRAY_SIZE(cros_pchg_props);
+		psy_cfg.drv_data = port;
+
+		psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
+		if (IS_ERR(psy))
+			return dev_err_probe(dev, PTR_ERR(psy),
+					"Failed to register power supply\n");
+		port->psy = psy;
+
+		charger->ports[charger->num_registered_psy++] = port;
+	}
+
+	if (!charger->num_registered_psy)
+		return -ENODEV;
+
+	nb = &charger->notifier;
+	nb->notifier_call = cros_ec_notify;
+	ret = blocking_notifier_chain_register(&ec_dev->ec_dev->event_notifier,
+					       nb);
+	if (ret < 0)
+		dev_err(dev, "Failed to register notifier (err:%d)\n", ret);
+
+	return 0;
+}
+
+static struct platform_driver cros_pchg_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = cros_pchg_probe
+};
+
+module_platform_driver(cros_pchg_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC peripheral device charger");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
new file mode 100644
index 000000000..b6c963767
--- /dev/null
+++ b/drivers/power/supply/cros_usbpd-charger.c
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for ChromeOS EC based USB PD Charger.
+ *
+ * Copyright (c) 2014 - 2018 Google, Inc
+ */
+
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_usbpd_notify.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define CHARGER_USBPD_DIR_NAME			"CROS_USBPD_CHARGER%d"
+#define CHARGER_DEDICATED_DIR_NAME		"CROS_DEDICATED_CHARGER"
+#define CHARGER_DIR_NAME_LENGTH		(sizeof(CHARGER_USBPD_DIR_NAME) >= \
+					 sizeof(CHARGER_DEDICATED_DIR_NAME) ? \
+					 sizeof(CHARGER_USBPD_DIR_NAME) : \
+					 sizeof(CHARGER_DEDICATED_DIR_NAME))
+#define CHARGER_CACHE_UPDATE_DELAY		msecs_to_jiffies(500)
+#define CHARGER_MANUFACTURER_MODEL_LENGTH	32
+
+#define DRV_NAME "cros-usbpd-charger"
+
+struct port_data {
+	int port_number;
+	char name[CHARGER_DIR_NAME_LENGTH];
+	char manufacturer[CHARGER_MANUFACTURER_MODEL_LENGTH];
+	char model_name[CHARGER_MANUFACTURER_MODEL_LENGTH];
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	int psy_usb_type;
+	int psy_online;
+	int psy_status;
+	int psy_current_max;
+	int psy_voltage_max_design;
+	int psy_voltage_now;
+	int psy_power_max;
+	struct charger_data *charger;
+	unsigned long last_update;
+};
+
+struct charger_data {
+	struct device *dev;
+	struct cros_ec_dev *ec_dev;
+	struct cros_ec_device *ec_device;
+	int num_charger_ports;
+	int num_usbpd_ports;
+	int num_registered_psy;
+	struct port_data *ports[EC_USB_PD_MAX_PORTS];
+	struct notifier_block notifier;
+};
+
+static enum power_supply_property cros_usbpd_charger_props[] = {
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_USB_TYPE
+};
+
+static enum power_supply_property cros_usbpd_dedicated_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_DRP,
+	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
+};
+
+/* Input voltage/current limit in mV/mA. Default to none. */
+static u16 input_voltage_limit = EC_POWER_LIMIT_NONE;
+static u16 input_current_limit = EC_POWER_LIMIT_NONE;
+
+static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port)
+{
+	return port->port_number >= port->charger->num_usbpd_ports;
+}
+
+static int cros_usbpd_charger_ec_command(struct charger_data *charger,
+					 unsigned int version,
+					 unsigned int command,
+					 void *outdata,
+					 unsigned int outsize,
+					 void *indata,
+					 unsigned int insize)
+{
+	struct cros_ec_dev *ec_dev = charger->ec_dev;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = ec_dev->cmd_offset + command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
+{
+	struct ec_response_charge_port_count resp;
+	int ret;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_CHARGE_PORT_COUNT,
+					    NULL, 0, &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.port_count;
+}
+
+static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger)
+{
+	struct ec_response_usb_pd_ports resp;
+	int ret;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
+					    NULL, 0, &resp, sizeof(resp));
+	if (ret < 0)
+		return ret;
+
+	return resp.num_ports;
+}
+
+static int cros_usbpd_charger_get_discovery_info(struct port_data *port)
+{
+	struct charger_data *charger = port->charger;
+	struct ec_params_usb_pd_discovery_entry resp;
+	struct ec_params_usb_pd_info_request req;
+	int ret;
+
+	req.port = port->port_number;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_USB_PD_DISCOVERY,
+					    &req, sizeof(req),
+					    &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(charger->dev,
+			"Unable to query discovery info (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	dev_dbg(charger->dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
+		port->port_number, resp.vid, resp.pid, resp.ptype);
+
+	snprintf(port->manufacturer, sizeof(port->manufacturer), "%x",
+		 resp.vid);
+	snprintf(port->model_name, sizeof(port->model_name), "%x", resp.pid);
+
+	return 0;
+}
+
+static int cros_usbpd_charger_get_power_info(struct port_data *port)
+{
+	struct charger_data *charger = port->charger;
+	struct ec_response_usb_pd_power_info resp;
+	struct ec_params_usb_pd_power_info req;
+	int last_psy_status, last_psy_usb_type;
+	struct device *dev = charger->dev;
+	int ret;
+
+	req.port = port->port_number;
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_USB_PD_POWER_INFO,
+					    &req, sizeof(req),
+					    &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	last_psy_status = port->psy_status;
+	last_psy_usb_type = port->psy_usb_type;
+
+	switch (resp.role) {
+	case USB_PD_PORT_POWER_DISCONNECTED:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 0;
+		break;
+	case USB_PD_PORT_POWER_SOURCE:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 0;
+		break;
+	case USB_PD_PORT_POWER_SINK:
+		port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+		port->psy_online = 1;
+		break;
+	case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 1;
+		break;
+	default:
+		dev_err(dev, "Unknown role %d\n", resp.role);
+		break;
+	}
+
+	port->psy_voltage_max_design = resp.meas.voltage_max;
+	port->psy_voltage_now = resp.meas.voltage_now;
+	port->psy_current_max = resp.meas.current_max;
+	port->psy_power_max = resp.max_power;
+
+	switch (resp.type) {
+	case USB_CHG_TYPE_BC12_SDP:
+	case USB_CHG_TYPE_VBUS:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case USB_CHG_TYPE_NONE:
+		/*
+		 * For dual-role devices when we are a source, the firmware
+		 * reports the type as NONE. Report such chargers as type
+		 * USB_PD_DRP.
+		 */
+		if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+		else
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case USB_CHG_TYPE_OTHER:
+	case USB_CHG_TYPE_PROPRIETARY:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
+		break;
+	case USB_CHG_TYPE_C:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_C;
+		break;
+	case USB_CHG_TYPE_BC12_DCP:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	case USB_CHG_TYPE_BC12_CDP:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case USB_CHG_TYPE_PD:
+		if (resp.dualrole)
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+		else
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		break;
+	case USB_CHG_TYPE_UNKNOWN:
+		/*
+		 * While the EC is trying to determine the type of charger that
+		 * has been plugged in, it will report the charger type as
+		 * unknown. Additionally since the power capabilities are
+		 * unknown, report the max current and voltage as zero.
+		 */
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		port->psy_voltage_max_design = 0;
+		port->psy_current_max = 0;
+		break;
+	default:
+		dev_dbg(dev, "Port %d: default case!\n", port->port_number);
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+	}
+
+	if (cros_usbpd_charger_port_is_dedicated(port))
+		port->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	else
+		port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+	dev_dbg(dev,
+		"Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
+		port->port_number, resp.type, resp.meas.voltage_max,
+		resp.meas.voltage_now, resp.meas.current_max,
+		resp.meas.current_lim, resp.max_power);
+
+	/*
+	 * If power supply type or status changed, explicitly call
+	 * power_supply_changed. This results in udev event getting generated
+	 * and allows user mode apps to react quicker instead of waiting for
+	 * their next poll of power supply status.
+	 */
+	if (last_psy_usb_type != port->psy_usb_type ||
+	    last_psy_status != port->psy_status)
+		power_supply_changed(port->psy);
+
+	return 0;
+}
+
+static int cros_usbpd_charger_get_port_status(struct port_data *port,
+					      bool ratelimit)
+{
+	int ret;
+
+	if (ratelimit &&
+	    time_is_after_jiffies(port->last_update +
+				  CHARGER_CACHE_UPDATE_DELAY))
+		return 0;
+
+	ret = cros_usbpd_charger_get_power_info(port);
+	if (ret < 0)
+		return ret;
+
+	if (!cros_usbpd_charger_port_is_dedicated(port))
+		ret = cros_usbpd_charger_get_discovery_info(port);
+	port->last_update = jiffies;
+
+	return ret;
+}
+
+static int cros_usbpd_charger_set_ext_power_limit(struct charger_data *charger,
+						  u16 current_lim,
+						  u16 voltage_lim)
+{
+	struct ec_params_external_power_limit_v1 req;
+	int ret;
+
+	req.current_lim = current_lim;
+	req.voltage_lim = voltage_lim;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_EXTERNAL_POWER_LIMIT,
+					    &req, sizeof(req), NULL, 0);
+	if (ret < 0)
+		dev_err(charger->dev,
+			"Unable to set the 'External Power Limit': %d\n", ret);
+
+	return ret;
+}
+
+static void cros_usbpd_charger_power_changed(struct power_supply *psy)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+	struct charger_data *charger = port->charger;
+	int i;
+
+	for (i = 0; i < charger->num_registered_psy; i++)
+		cros_usbpd_charger_get_port_status(charger->ports[i], false);
+}
+
+static int cros_usbpd_charger_get_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+	struct charger_data *charger = port->charger;
+	struct cros_ec_device *ec_device = charger->ec_device;
+	struct device *dev = charger->dev;
+	int ret;
+
+	/* Only refresh ec_port_status for dynamic properties */
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		/*
+		 * If mkbp_event_supported, then we can be assured that
+		 * the driver's state for the online property is consistent
+		 * with the hardware. However, if we aren't event driven,
+		 * the optimization before to skip an ec_port_status get
+		 * and only returned cached values of the online property will
+		 * cause a delay in detecting a cable attach until one of the
+		 * other properties are read.
+		 *
+		 * Allow an ec_port_status refresh for online property check
+		 * if we're not already online to check for plug events if
+		 * not mkbp_event_supported.
+		 */
+		if (ec_device->mkbp_event_supported || port->psy_online)
+			break;
+		fallthrough;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = cros_usbpd_charger_get_port_status(port, true);
+		if (ret < 0) {
+			dev_err(dev, "Failed to get port status (err:0x%x)\n",
+				ret);
+			return -EINVAL;
+		}
+		break;
+	default:
+		break;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = port->psy_online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = port->psy_status;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = port->psy_current_max * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = port->psy_voltage_max_design * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = port->psy_voltage_now * 1000;
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = port->psy_usb_type;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (input_current_limit == EC_POWER_LIMIT_NONE)
+			val->intval = -1;
+		else
+			val->intval = input_current_limit * 1000;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		if (input_voltage_limit == EC_POWER_LIMIT_NONE)
+			val->intval = -1;
+		else
+			val->intval = input_voltage_limit * 1000;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = port->model_name;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = port->manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cros_usbpd_charger_set_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+	struct charger_data *charger = port->charger;
+	struct device *dev = charger->dev;
+	u16 intval;
+	int ret;
+
+	/* U16_MAX in mV/mA is the maximum supported value */
+	if (val->intval >= U16_MAX * 1000)
+		return -EINVAL;
+	/* A negative number is used to clear the limit */
+	if (val->intval < 0)
+		intval = EC_POWER_LIMIT_NONE;
+	else	/* Convert from uA/uV to mA/mV */
+		intval = val->intval / 1000;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = cros_usbpd_charger_set_ext_power_limit(charger, intval,
+							input_voltage_limit);
+		if (ret < 0)
+			break;
+
+		input_current_limit = intval;
+		if (input_current_limit == EC_POWER_LIMIT_NONE)
+			dev_info(dev,
+			  "External Current Limit cleared for all ports\n");
+		else
+			dev_info(dev,
+			  "External Current Limit set to %dmA for all ports\n",
+			  input_current_limit);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = cros_usbpd_charger_set_ext_power_limit(charger,
+							input_current_limit,
+							intval);
+		if (ret < 0)
+			break;
+
+		input_voltage_limit = intval;
+		if (input_voltage_limit == EC_POWER_LIMIT_NONE)
+			dev_info(dev,
+			  "External Voltage Limit cleared for all ports\n");
+		else
+			dev_info(dev,
+			  "External Voltage Limit set to %dmV for all ports\n",
+			  input_voltage_limit);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int cros_usbpd_charger_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
+				       unsigned long host_event,
+				       void *_notify)
+{
+	struct charger_data *charger = container_of(nb, struct charger_data,
+						    notifier);
+
+	cros_usbpd_charger_power_changed(charger->ports[0]->psy);
+	return NOTIFY_OK;
+}
+
+static void cros_usbpd_charger_unregister_notifier(void *data)
+{
+	struct charger_data *charger = data;
+
+	cros_usbpd_unregister_notify(&charger->notifier);
+}
+
+static int cros_usbpd_charger_probe(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct cros_ec_device *ec_device = ec_dev->ec_dev;
+	struct power_supply_desc *psy_desc;
+	struct device *dev = &pd->dev;
+	struct charger_data *charger;
+	struct power_supply *psy;
+	struct port_data *port;
+	int ret = -EINVAL;
+	int i;
+
+	charger = devm_kzalloc(dev, sizeof(struct charger_data),
+			       GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->dev = dev;
+	charger->ec_dev = ec_dev;
+	charger->ec_device = ec_device;
+
+	platform_set_drvdata(pd, charger);
+
+	/*
+	 * We need to know the number of USB PD ports in order to know whether
+	 * there is a dedicated port. The dedicated port will always be
+	 * after the USB PD ports, and there should be only one.
+	 */
+	charger->num_usbpd_ports =
+		cros_usbpd_charger_get_usbpd_num_ports(charger);
+	if (charger->num_usbpd_ports <= 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD.
+		 * Log a message, but no need to warn.
+		 */
+		dev_info(dev, "No USB PD charging ports found\n");
+	}
+
+	charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
+	if (charger->num_charger_ports < 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD.
+		 * Log a message, but no need to warn.
+		 * Older ECs do not support the above command, in that case
+		 * let's set up the number of charger ports equal to the number
+		 * of USB PD ports
+		 */
+		dev_info(dev, "Could not get charger port count\n");
+		charger->num_charger_ports = charger->num_usbpd_ports;
+	}
+
+	if (charger->num_charger_ports <= 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD and
+		 * doesn't have a dedicated port.
+		 * Log a message, but no need to warn.
+		 */
+		dev_info(dev, "No charging ports found\n");
+		ret = -ENODEV;
+		goto fail_nowarn;
+	}
+
+	/*
+	 * Sanity checks on the number of ports:
+	 *  there should be at most 1 dedicated port
+	 */
+	if (charger->num_charger_ports < charger->num_usbpd_ports ||
+	    charger->num_charger_ports > (charger->num_usbpd_ports + 1)) {
+		dev_err(dev, "Unexpected number of charge port count\n");
+		ret = -EPROTO;
+		goto fail_nowarn;
+	}
+
+	for (i = 0; i < charger->num_charger_ports; i++) {
+		struct power_supply_config psy_cfg = {};
+
+		port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
+		if (!port) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		port->charger = charger;
+		port->port_number = i;
+
+		psy_desc = &port->psy_desc;
+		psy_desc->get_property = cros_usbpd_charger_get_prop;
+		psy_desc->set_property = cros_usbpd_charger_set_prop;
+		psy_desc->property_is_writeable =
+				cros_usbpd_charger_property_is_writeable;
+		psy_desc->external_power_changed =
+					cros_usbpd_charger_power_changed;
+		psy_cfg.drv_data = port;
+
+		if (cros_usbpd_charger_port_is_dedicated(port)) {
+			sprintf(port->name, CHARGER_DEDICATED_DIR_NAME);
+			psy_desc->type = POWER_SUPPLY_TYPE_MAINS;
+			psy_desc->properties =
+				cros_usbpd_dedicated_charger_props;
+			psy_desc->num_properties =
+				ARRAY_SIZE(cros_usbpd_dedicated_charger_props);
+		} else {
+			sprintf(port->name, CHARGER_USBPD_DIR_NAME, i);
+			psy_desc->type = POWER_SUPPLY_TYPE_USB;
+			psy_desc->properties = cros_usbpd_charger_props;
+			psy_desc->num_properties =
+				ARRAY_SIZE(cros_usbpd_charger_props);
+			psy_desc->usb_types = cros_usbpd_charger_usb_types;
+			psy_desc->num_usb_types =
+				ARRAY_SIZE(cros_usbpd_charger_usb_types);
+		}
+
+		psy_desc->name = port->name;
+
+		psy = devm_power_supply_register_no_ws(dev, psy_desc,
+						       &psy_cfg);
+		if (IS_ERR(psy)) {
+			dev_err(dev, "Failed to register power supply\n");
+			continue;
+		}
+		port->psy = psy;
+
+		charger->ports[charger->num_registered_psy++] = port;
+	}
+
+	if (!charger->num_registered_psy) {
+		ret = -ENODEV;
+		dev_err(dev, "No power supplies registered\n");
+		goto fail;
+	}
+
+	/* Get PD events from the EC */
+	charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
+	ret = cros_usbpd_register_notify(&charger->notifier);
+	if (ret < 0) {
+		dev_warn(dev, "failed to register notifier\n");
+	} else {
+		ret = devm_add_action_or_reset(dev,
+				cros_usbpd_charger_unregister_notifier,
+				charger);
+		if (ret < 0)
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
+
+fail_nowarn:
+	dev_info(dev, "Failing probe (err:0x%x)\n", ret);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_usbpd_charger_resume(struct device *dev)
+{
+	struct charger_data *charger = dev_get_drvdata(dev);
+	int i;
+
+	if (!charger)
+		return 0;
+
+	for (i = 0; i < charger->num_registered_psy; i++) {
+		power_supply_changed(charger->ports[i]->psy);
+		charger->ports[i]->last_update =
+				jiffies - CHARGER_CACHE_UPDATE_DELAY;
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_usbpd_charger_pm_ops, NULL,
+			 cros_usbpd_charger_resume);
+
+static struct platform_driver cros_usbpd_charger_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_usbpd_charger_pm_ops,
+	},
+	.probe = cros_usbpd_charger_probe
+};
+
+module_platform_driver(cros_usbpd_charger_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC USBPD charger");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c
new file mode 100644
index 000000000..9d957cf8e
--- /dev/null
+++ b/drivers/power/supply/cw2015_battery.c
@@ -0,0 +1,759 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2020, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@rock-chips.com>
+ * Authors: Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/gfp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+#include <linux/devm-helpers.h>
+
+#define CW2015_SIZE_BATINFO		64
+
+#define CW2015_RESET_TRIES		5
+
+#define CW2015_REG_VERSION		0x00
+#define CW2015_REG_VCELL		0x02
+#define CW2015_REG_SOC			0x04
+#define CW2015_REG_RRT_ALERT		0x06
+#define CW2015_REG_CONFIG		0x08
+#define CW2015_REG_MODE			0x0A
+#define CW2015_REG_BATINFO		0x10
+
+#define CW2015_MODE_SLEEP_MASK		GENMASK(7, 6)
+#define CW2015_MODE_SLEEP		(0x03 << 6)
+#define CW2015_MODE_NORMAL		(0x00 << 6)
+#define CW2015_MODE_QUICK_START		(0x03 << 4)
+#define CW2015_MODE_RESTART		(0x0f << 0)
+
+#define CW2015_CONFIG_UPDATE_FLG	(0x01 << 1)
+#define CW2015_ATHD(x)			((x) << 3)
+#define CW2015_MASK_ATHD		GENMASK(7, 3)
+#define CW2015_MASK_SOC			GENMASK(12, 0)
+
+/* reset gauge of no valid state of charge could be polled for 40s */
+#define CW2015_BAT_SOC_ERROR_MS		(40 * MSEC_PER_SEC)
+/* reset gauge if state of charge stuck for half an hour during charging */
+#define CW2015_BAT_CHARGING_STUCK_MS	(1800 * MSEC_PER_SEC)
+
+/* poll interval from CellWise GPL Android driver example */
+#define CW2015_DEFAULT_POLL_INTERVAL_MS		8000
+
+#define CW2015_AVERAGING_SAMPLES		3
+
+struct cw_battery {
+	struct device *dev;
+	struct workqueue_struct *battery_workqueue;
+	struct delayed_work battery_delay_work;
+	struct regmap *regmap;
+	struct power_supply *rk_bat;
+	struct power_supply_battery_info *battery;
+	u8 *bat_profile;
+
+	bool charger_attached;
+	bool battery_changed;
+
+	int soc;
+	int voltage_mv;
+	int status;
+	int time_to_empty;
+	int charge_count;
+
+	u32 poll_interval_ms;
+	u8 alert_level;
+
+	unsigned int read_errors;
+	unsigned int charge_stuck_cnt;
+};
+
+static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
+{
+	__be16 value;
+	int ret;
+
+	ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpu(value);
+	return 0;
+}
+
+static int cw_update_profile(struct cw_battery *cw_bat)
+{
+	int ret;
+	unsigned int reg_val;
+	u8 reset_val;
+
+	/* make sure gauge is not in sleep mode */
+	ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+	if (ret)
+		return ret;
+
+	reset_val = reg_val;
+	if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+		dev_err(cw_bat->dev,
+			"Gauge is in sleep mode, can't update battery info\n");
+		return -EINVAL;
+	}
+
+	/* write new battery info */
+	ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
+			       cw_bat->bat_profile,
+			       CW2015_SIZE_BATINFO);
+	if (ret)
+		return ret;
+
+	/* set config update flag  */
+	reg_val |= CW2015_CONFIG_UPDATE_FLG;
+	reg_val &= ~CW2015_MASK_ATHD;
+	reg_val |= CW2015_ATHD(cw_bat->alert_level);
+	ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+	if (ret)
+		return ret;
+
+	/* reset gauge to apply new battery profile */
+	reset_val &= ~CW2015_MODE_RESTART;
+	reg_val = reset_val | CW2015_MODE_RESTART;
+	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+	if (ret)
+		return ret;
+
+	/* wait for gauge to reset */
+	msleep(20);
+
+	/* clear reset flag */
+	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+	if (ret)
+		return ret;
+
+	/* wait for gauge to become ready */
+	ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
+				       reg_val, reg_val <= 100,
+				       10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
+	if (ret)
+		dev_err(cw_bat->dev,
+			"Gauge did not become ready after profile upload\n");
+	else
+		dev_dbg(cw_bat->dev, "Battery profile updated\n");
+
+	return ret;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+	int ret;
+	unsigned int reg_val = CW2015_MODE_SLEEP;
+
+	if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+		reg_val = CW2015_MODE_NORMAL;
+		ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+	if (ret)
+		return ret;
+
+	if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+		dev_dbg(cw_bat->dev, "Setting new alert level\n");
+		reg_val &= ~CW2015_MASK_ATHD;
+		reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+		ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+	if (ret)
+		return ret;
+
+	if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+		dev_dbg(cw_bat->dev,
+			"Battery profile not present, uploading battery profile\n");
+		if (cw_bat->bat_profile) {
+			ret = cw_update_profile(cw_bat);
+			if (ret) {
+				dev_err(cw_bat->dev,
+					"Failed to upload battery profile\n");
+				return ret;
+			}
+		} else {
+			dev_warn(cw_bat->dev,
+				 "No profile specified, continuing without profile\n");
+		}
+	} else if (cw_bat->bat_profile) {
+		u8 bat_info[CW2015_SIZE_BATINFO];
+
+		ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
+				      bat_info, CW2015_SIZE_BATINFO);
+		if (ret) {
+			dev_err(cw_bat->dev,
+				"Failed to read stored battery profile\n");
+			return ret;
+		}
+
+		if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
+			dev_warn(cw_bat->dev, "Replacing stored battery profile\n");
+			ret = cw_update_profile(cw_bat);
+			if (ret)
+				return ret;
+		}
+	} else {
+		dev_warn(cw_bat->dev,
+			 "Can't check current battery profile, no profile provided\n");
+	}
+
+	dev_dbg(cw_bat->dev, "Battery profile configured\n");
+	return 0;
+}
+
+static int cw_power_on_reset(struct cw_battery *cw_bat)
+{
+	int ret;
+	unsigned char reset_val;
+
+	reset_val = CW2015_MODE_SLEEP;
+	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+	if (ret)
+		return ret;
+
+	/* wait for gauge to enter sleep */
+	msleep(20);
+
+	reset_val = CW2015_MODE_NORMAL;
+	ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+	if (ret)
+		return ret;
+
+	ret = cw_init(cw_bat);
+	if (ret)
+		return ret;
+	return 0;
+}
+
+#define HYSTERESIS(current, previous, up, down) \
+	(((current) < (previous) + (up)) && ((current) > (previous) - (down)))
+
+static int cw_get_soc(struct cw_battery *cw_bat)
+{
+	unsigned int soc;
+	int ret;
+
+	ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
+	if (ret)
+		return ret;
+
+	if (soc > 100) {
+		int max_error_cycles =
+			CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
+
+		dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc);
+		cw_bat->read_errors++;
+		if (cw_bat->read_errors > max_error_cycles) {
+			dev_warn(cw_bat->dev,
+				 "Too many invalid SoC reports, resetting gauge\n");
+			cw_power_on_reset(cw_bat);
+			cw_bat->read_errors = 0;
+		}
+		return cw_bat->soc;
+	}
+	cw_bat->read_errors = 0;
+
+	/* Reset gauge if stuck while charging */
+	if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
+		int max_stuck_cycles =
+			CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
+
+		cw_bat->charge_stuck_cnt++;
+		if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
+			dev_warn(cw_bat->dev,
+				 "SoC stuck @%u%%, resetting gauge\n", soc);
+			cw_power_on_reset(cw_bat);
+			cw_bat->charge_stuck_cnt = 0;
+		}
+	} else {
+		cw_bat->charge_stuck_cnt = 0;
+	}
+
+	/* Ignore voltage dips during charge */
+	if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
+		soc = cw_bat->soc;
+
+	/* Ignore voltage spikes during discharge */
+	if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
+		soc = cw_bat->soc;
+
+	return soc;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+	int ret, i, voltage_mv;
+	u16 reg_val;
+	u32 avg = 0;
+
+	for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
+		ret = cw_read_word(cw_bat, CW2015_REG_VCELL, &reg_val);
+		if (ret)
+			return ret;
+
+		avg += reg_val;
+	}
+	avg /= CW2015_AVERAGING_SAMPLES;
+
+	/*
+	 * 305 uV per ADC step
+	 * Use 312 / 1024  as efficient approximation of 305 / 1000
+	 * Negligible error of 0.1%
+	 */
+	voltage_mv = avg * 312 / 1024;
+
+	dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
+		voltage_mv, reg_val);
+	return voltage_mv;
+}
+
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+	int ret;
+	u16 value16;
+
+	ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
+	if (ret)
+		return ret;
+
+	return value16 & CW2015_MASK_SOC;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+	int ret;
+
+	ret = power_supply_am_i_supplied(cw_bat->rk_bat);
+	if (ret < 0) {
+		dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret);
+	} else {
+		bool charger_attached;
+
+		charger_attached = !!ret;
+		if (cw_bat->charger_attached != charger_attached) {
+			cw_bat->battery_changed = true;
+			if (charger_attached)
+				cw_bat->charge_count++;
+		}
+		cw_bat->charger_attached = charger_attached;
+	}
+}
+
+static void cw_update_soc(struct cw_battery *cw_bat)
+{
+	int soc;
+
+	soc = cw_get_soc(cw_bat);
+	if (soc < 0)
+		dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc);
+	else if (cw_bat->soc != soc) {
+		cw_bat->soc = soc;
+		cw_bat->battery_changed = true;
+	}
+}
+
+static void cw_update_voltage(struct cw_battery *cw_bat)
+{
+	int voltage_mv;
+
+	voltage_mv = cw_get_voltage(cw_bat);
+	if (voltage_mv < 0)
+		dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n",
+			voltage_mv);
+	else
+		cw_bat->voltage_mv = voltage_mv;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+	int status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (cw_bat->charger_attached) {
+		if (cw_bat->soc >= 100)
+			status = POWER_SUPPLY_STATUS_FULL;
+		else
+			status = POWER_SUPPLY_STATUS_CHARGING;
+	}
+
+	if (cw_bat->status != status)
+		cw_bat->battery_changed = true;
+	cw_bat->status = status;
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+	int time_to_empty;
+
+	time_to_empty = cw_get_time_to_empty(cw_bat);
+	if (time_to_empty < 0)
+		dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n",
+			time_to_empty);
+	else if (cw_bat->time_to_empty != time_to_empty) {
+		cw_bat->time_to_empty = time_to_empty;
+		cw_bat->battery_changed = true;
+	}
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+	struct delayed_work *delay_work;
+	struct cw_battery *cw_bat;
+	int ret;
+	unsigned int reg_val;
+
+	delay_work = to_delayed_work(work);
+	cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
+	ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+	if (ret) {
+		dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret);
+	} else {
+		if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+			int i;
+
+			for (i = 0; i < CW2015_RESET_TRIES; i++) {
+				if (!cw_power_on_reset(cw_bat))
+					break;
+			}
+		}
+		cw_update_soc(cw_bat);
+		cw_update_voltage(cw_bat);
+		cw_update_charge_status(cw_bat);
+		cw_update_status(cw_bat);
+		cw_update_time_to_empty(cw_bat);
+	}
+	dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached);
+	dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status);
+	dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc);
+	dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv);
+
+	if (cw_bat->battery_changed)
+		power_supply_changed(cw_bat->rk_bat);
+	cw_bat->battery_changed = false;
+
+	queue_delayed_work(cw_bat->battery_workqueue,
+			   &cw_bat->battery_delay_work,
+			   msecs_to_jiffies(cw_bat->poll_interval_ms));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+	return	cw_bat->time_to_empty > 0 &&
+		cw_bat->time_to_empty < CW2015_MASK_SOC &&
+		cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct cw_battery *cw_bat;
+
+	cw_bat = power_supply_get_drvdata(psy);
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = cw_bat->soc;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = cw_bat->status;
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!cw_bat->voltage_mv;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = cw_bat->voltage_mv * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		if (cw_battery_valid_time_to_empty(cw_bat))
+			val->intval = cw_bat->time_to_empty * 60;
+		else
+			val->intval = 0;
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = cw_bat->charge_count;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		if (cw_bat->battery->charge_full_design_uah > 0)
+			val->intval = cw_bat->battery->charge_full_design_uah;
+		else
+			val->intval = 0;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = cw_bat->battery->charge_full_design_uah;
+		val->intval = val->intval * cw_bat->soc / 100;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (cw_battery_valid_time_to_empty(cw_bat) &&
+		    cw_bat->battery->charge_full_design_uah > 0) {
+			/* calculate remaining capacity */
+			val->intval = cw_bat->battery->charge_full_design_uah;
+			val->intval = val->intval * cw_bat->soc / 100;
+
+			/* estimate current based on time to empty */
+			val->intval = 60 * val->intval / cw_bat->time_to_empty;
+		} else {
+			val->intval = 0;
+		}
+
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+	.name		= "cw2015-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= cw_battery_properties,
+	.num_properties	= ARRAY_SIZE(cw_battery_properties),
+	.get_property	= cw_battery_get_property,
+};
+
+static int cw2015_parse_properties(struct cw_battery *cw_bat)
+{
+	struct device *dev = cw_bat->dev;
+	int length;
+	int ret;
+
+	length = device_property_count_u8(dev, "cellwise,battery-profile");
+	if (length < 0) {
+		dev_warn(cw_bat->dev,
+			 "No battery-profile found, using current flash contents\n");
+	} else if (length != CW2015_SIZE_BATINFO) {
+		dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
+			CW2015_SIZE_BATINFO);
+		return -EINVAL;
+	} else {
+		cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
+		if (!cw_bat->bat_profile)
+			return -ENOMEM;
+
+		ret = device_property_read_u8_array(dev,
+						"cellwise,battery-profile",
+						cw_bat->bat_profile,
+						length);
+		if (ret)
+			return ret;
+	}
+
+	ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms",
+				       &cw_bat->poll_interval_ms);
+	if (ret) {
+		dev_dbg(cw_bat->dev, "Using default poll interval\n");
+		cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
+	}
+
+	return 0;
+}
+
+static const struct regmap_range regmap_ranges_rd_yes[] = {
+	regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
+	regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
+	regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+	regmap_reg_range(CW2015_REG_BATINFO,
+			CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_rd_table = {
+	.yes_ranges = regmap_ranges_rd_yes,
+	.n_yes_ranges = 4,
+};
+
+static const struct regmap_range regmap_ranges_wr_yes[] = {
+	regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
+	regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+	regmap_reg_range(CW2015_REG_BATINFO,
+			CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_wr_table = {
+	.yes_ranges = regmap_ranges_wr_yes,
+	.n_yes_ranges = 3,
+};
+
+static const struct regmap_range regmap_ranges_vol_yes[] = {
+	regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
+};
+
+static const struct regmap_access_table regmap_vol_table = {
+	.yes_ranges = regmap_ranges_vol_yes,
+	.n_yes_ranges = 1,
+};
+
+static const struct regmap_config cw2015_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.rd_table = &regmap_rd_table,
+	.wr_table = &regmap_wr_table,
+	.volatile_table = &regmap_vol_table,
+	.max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
+};
+
+static int cw_bat_probe(struct i2c_client *client)
+{
+	int ret;
+	struct cw_battery *cw_bat;
+	struct power_supply_config psy_cfg = { 0 };
+
+	cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+	if (!cw_bat)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, cw_bat);
+	cw_bat->dev = &client->dev;
+	cw_bat->soc = 1;
+
+	ret = cw2015_parse_properties(cw_bat);
+	if (ret) {
+		dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n");
+		return ret;
+	}
+
+	cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
+	if (IS_ERR(cw_bat->regmap)) {
+		dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n",
+			PTR_ERR(cw_bat->regmap));
+		return PTR_ERR(cw_bat->regmap);
+	}
+
+	ret = cw_init(cw_bat);
+	if (ret) {
+		dev_err(cw_bat->dev, "Init failed: %d\n", ret);
+		return ret;
+	}
+
+	psy_cfg.drv_data = cw_bat;
+	psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
+
+	cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+						    &cw2015_bat_desc,
+						    &psy_cfg);
+	if (IS_ERR(cw_bat->rk_bat)) {
+		/* try again if this happens */
+		dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat),
+			"Failed to register power supply\n");
+		return PTR_ERR(cw_bat->rk_bat);
+	}
+
+	ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+	if (ret) {
+		/* Allocate an empty battery */
+		cw_bat->battery = devm_kzalloc(&client->dev,
+					       sizeof(*cw_bat->battery),
+					       GFP_KERNEL);
+		if (!cw_bat->battery)
+			return -ENOMEM;
+		dev_warn(cw_bat->dev,
+			 "No monitored battery, some properties will be missing\n");
+	}
+
+	cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+	if (!cw_bat->battery_workqueue)
+		return -ENOMEM;
+
+	devm_delayed_work_autocancel(&client->dev,
+							  &cw_bat->battery_delay_work, cw_bat_work);
+	queue_delayed_work(cw_bat->battery_workqueue,
+			   &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+	return 0;
+}
+
+static int __maybe_unused cw_bat_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+	cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+	return 0;
+}
+
+static int __maybe_unused cw_bat_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+	queue_delayed_work(cw_bat->battery_workqueue,
+			   &cw_bat->battery_delay_work, 0);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+	{ "cw2015", 0 },
+	{ }
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+	{ .compatible = "cellwise,cw2015" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+	.driver = {
+		.name = "cw2015",
+		.of_match_table = cw2015_of_match,
+		.pm = &cw_bat_pm_ops,
+	},
+	.probe_new = cw_bat_probe,
+	.id_table = cw_bat_id_table,
+};
+
+module_i2c_driver(cw_bat_driver);
+
+MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9030_battery.c b/drivers/power/supply/da9030_battery.c
new file mode 100644
index 000000000..0deba48d2
--- /dev/null
+++ b/drivers/power/supply/da9030_battery.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery charger driver for Dialog Semiconductor DA9030
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * 	Mike Rapoport <mike@compulab.co.il>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/da903x.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/notifier.h>
+
+#define DA9030_FAULT_LOG		0x0a
+#define DA9030_FAULT_LOG_OVER_TEMP	(1 << 7)
+#define DA9030_FAULT_LOG_VBAT_OVER	(1 << 4)
+
+#define DA9030_CHARGE_CONTROL		0x28
+#define DA9030_CHRG_CHARGER_ENABLE	(1 << 7)
+
+#define DA9030_ADC_MAN_CONTROL		0x30
+#define DA9030_ADC_TBATREF_ENABLE	(1 << 5)
+#define DA9030_ADC_LDO_INT_ENABLE	(1 << 4)
+
+#define DA9030_ADC_AUTO_CONTROL		0x31
+#define DA9030_ADC_TBAT_ENABLE		(1 << 5)
+#define DA9030_ADC_VBAT_IN_TXON		(1 << 4)
+#define DA9030_ADC_VCH_ENABLE		(1 << 3)
+#define DA9030_ADC_ICH_ENABLE		(1 << 2)
+#define DA9030_ADC_VBAT_ENABLE		(1 << 1)
+#define DA9030_ADC_AUTO_SLEEP_ENABLE	(1 << 0)
+
+#define DA9030_VBATMON		0x32
+#define DA9030_VBATMONTXON	0x33
+#define DA9030_TBATHIGHP	0x34
+#define DA9030_TBATHIGHN	0x35
+#define DA9030_TBATLOW		0x36
+
+#define DA9030_VBAT_RES		0x41
+#define DA9030_VBATMIN_RES	0x42
+#define DA9030_VBATMINTXON_RES	0x43
+#define DA9030_ICHMAX_RES	0x44
+#define DA9030_ICHMIN_RES	0x45
+#define DA9030_ICHAVERAGE_RES	0x46
+#define DA9030_VCHMAX_RES	0x47
+#define DA9030_VCHMIN_RES	0x48
+#define DA9030_TBAT_RES		0x49
+
+struct da9030_adc_res {
+	uint8_t vbat_res;
+	uint8_t vbatmin_res;
+	uint8_t vbatmintxon;
+	uint8_t ichmax_res;
+	uint8_t ichmin_res;
+	uint8_t ichaverage_res;
+	uint8_t vchmax_res;
+	uint8_t vchmin_res;
+	uint8_t tbat_res;
+	uint8_t adc_in4_res;
+	uint8_t adc_in5_res;
+};
+
+struct da9030_battery_thresholds {
+	int tbat_low;
+	int tbat_high;
+	int tbat_restart;
+
+	int vbat_low;
+	int vbat_crit;
+	int vbat_charge_start;
+	int vbat_charge_stop;
+	int vbat_charge_restart;
+
+	int vcharge_min;
+	int vcharge_max;
+};
+
+struct da9030_charger {
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+
+	struct device *master;
+
+	struct da9030_adc_res adc;
+	struct delayed_work work;
+	unsigned int interval;
+
+	struct power_supply_info *battery_info;
+
+	struct da9030_battery_thresholds thresholds;
+
+	unsigned int charge_milliamp;
+	unsigned int charge_millivolt;
+
+	/* charger status */
+	bool chdet;
+	uint8_t fault;
+	int mA;
+	int mV;
+	bool is_on;
+
+	struct notifier_block nb;
+
+	/* platform callbacks for battery low and critical events */
+	void (*battery_low)(void);
+	void (*battery_critical)(void);
+
+	struct dentry *debug_file;
+};
+
+static inline int da9030_reg_to_mV(int reg)
+{
+	return ((reg * 2650) >> 8) + 2650;
+}
+
+static inline int da9030_millivolt_to_reg(int mV)
+{
+	return ((mV - 2650) << 8) / 2650;
+}
+
+static inline int da9030_reg_to_mA(int reg)
+{
+	return ((reg * 24000) >> 8) / 15;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int bat_debug_show(struct seq_file *s, void *data)
+{
+	struct da9030_charger *charger = s->private;
+
+	seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off");
+	if (charger->chdet) {
+		seq_printf(s, "iset = %dmA, vset = %dmV\n",
+			   charger->mA, charger->mV);
+	}
+
+	seq_printf(s, "vbat_res = %d (%dmV)\n",
+		   charger->adc.vbat_res,
+		   da9030_reg_to_mV(charger->adc.vbat_res));
+	seq_printf(s, "vbatmin_res = %d (%dmV)\n",
+		   charger->adc.vbatmin_res,
+		   da9030_reg_to_mV(charger->adc.vbatmin_res));
+	seq_printf(s, "vbatmintxon = %d (%dmV)\n",
+		   charger->adc.vbatmintxon,
+		   da9030_reg_to_mV(charger->adc.vbatmintxon));
+	seq_printf(s, "ichmax_res = %d (%dmA)\n",
+		   charger->adc.ichmax_res,
+		   da9030_reg_to_mV(charger->adc.ichmax_res));
+	seq_printf(s, "ichmin_res = %d (%dmA)\n",
+		   charger->adc.ichmin_res,
+		   da9030_reg_to_mA(charger->adc.ichmin_res));
+	seq_printf(s, "ichaverage_res = %d (%dmA)\n",
+		   charger->adc.ichaverage_res,
+		   da9030_reg_to_mA(charger->adc.ichaverage_res));
+	seq_printf(s, "vchmax_res = %d (%dmV)\n",
+		   charger->adc.vchmax_res,
+		   da9030_reg_to_mA(charger->adc.vchmax_res));
+	seq_printf(s, "vchmin_res = %d (%dmV)\n",
+		   charger->adc.vchmin_res,
+		   da9030_reg_to_mV(charger->adc.vchmin_res));
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(bat_debug);
+
+static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
+{
+	charger->debug_file = debugfs_create_file("charger", 0666, NULL,
+						  charger, &bat_debug_fops);
+	return charger->debug_file;
+}
+
+static void da9030_bat_remove_debugfs(struct da9030_charger *charger)
+{
+	debugfs_remove(charger->debug_file);
+}
+#else
+static inline struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
+{
+	return NULL;
+}
+static inline void da9030_bat_remove_debugfs(struct da9030_charger *charger)
+{
+}
+#endif
+
+static inline void da9030_read_adc(struct da9030_charger *charger,
+				   struct da9030_adc_res *adc)
+{
+	da903x_reads(charger->master, DA9030_VBAT_RES,
+		     sizeof(*adc), (uint8_t *)adc);
+}
+
+static void da9030_charger_update_state(struct da9030_charger *charger)
+{
+	uint8_t val;
+
+	da903x_read(charger->master, DA9030_CHARGE_CONTROL, &val);
+	charger->is_on = (val & DA9030_CHRG_CHARGER_ENABLE) ? 1 : 0;
+	charger->mA = ((val >> 3) & 0xf) * 100;
+	charger->mV = (val & 0x7) * 50 + 4000;
+
+	da9030_read_adc(charger, &charger->adc);
+	da903x_read(charger->master, DA9030_FAULT_LOG, &charger->fault);
+	charger->chdet = da903x_query_status(charger->master,
+						     DA9030_STATUS_CHDET);
+}
+
+static void da9030_set_charge(struct da9030_charger *charger, int on)
+{
+	uint8_t val;
+
+	if (on) {
+		val = DA9030_CHRG_CHARGER_ENABLE;
+		val |= (charger->charge_milliamp / 100) << 3;
+		val |= (charger->charge_millivolt - 4000) / 50;
+		charger->is_on = 1;
+	} else {
+		val = 0;
+		charger->is_on = 0;
+	}
+
+	da903x_write(charger->master, DA9030_CHARGE_CONTROL, val);
+
+	power_supply_changed(charger->psy);
+}
+
+static void da9030_charger_check_state(struct da9030_charger *charger)
+{
+	da9030_charger_update_state(charger);
+
+	/* we wake or boot with external power on */
+	if (!charger->is_on) {
+		if ((charger->chdet) &&
+		    (charger->adc.vbat_res <
+		     charger->thresholds.vbat_charge_start)) {
+			da9030_set_charge(charger, 1);
+		}
+	} else {
+		/* Charger has been pulled out */
+		if (!charger->chdet) {
+			da9030_set_charge(charger, 0);
+			return;
+		}
+
+		if (charger->adc.vbat_res >=
+		    charger->thresholds.vbat_charge_stop) {
+			da9030_set_charge(charger, 0);
+			da903x_write(charger->master, DA9030_VBATMON,
+				       charger->thresholds.vbat_charge_restart);
+		} else if (charger->adc.vbat_res >
+			   charger->thresholds.vbat_low) {
+			/* we are charging and passed LOW_THRESH,
+			   so upate DA9030 VBAT threshold
+			 */
+			da903x_write(charger->master, DA9030_VBATMON,
+				     charger->thresholds.vbat_low);
+		}
+		if (charger->adc.vchmax_res > charger->thresholds.vcharge_max ||
+		    charger->adc.vchmin_res < charger->thresholds.vcharge_min ||
+		    /* Tempreture readings are negative */
+		    charger->adc.tbat_res < charger->thresholds.tbat_high ||
+		    charger->adc.tbat_res > charger->thresholds.tbat_low) {
+			/* disable charger */
+			da9030_set_charge(charger, 0);
+		}
+	}
+}
+
+static void da9030_charging_monitor(struct work_struct *work)
+{
+	struct da9030_charger *charger;
+
+	charger = container_of(work, struct da9030_charger, work.work);
+
+	da9030_charger_check_state(charger);
+
+	/* reschedule for the next time */
+	schedule_delayed_work(&charger->work, charger->interval);
+}
+
+static enum power_supply_property da9030_battery_props[] = {
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+};
+
+static void da9030_battery_check_status(struct da9030_charger *charger,
+				    union power_supply_propval *val)
+{
+	if (charger->chdet) {
+		if (charger->is_on)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+}
+
+static void da9030_battery_check_health(struct da9030_charger *charger,
+				    union power_supply_propval *val)
+{
+	if (charger->fault & DA9030_FAULT_LOG_OVER_TEMP)
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+	else if (charger->fault & DA9030_FAULT_LOG_VBAT_OVER)
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int da9030_battery_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct da9030_charger *charger = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		da9030_battery_check_status(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		da9030_battery_check_health(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = charger->battery_info->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = charger->battery_info->voltage_max_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = charger->battery_info->voltage_min_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = da9030_reg_to_mV(charger->adc.vbat_res) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval =
+			da9030_reg_to_mA(charger->adc.ichaverage_res) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = charger->battery_info->name;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static void da9030_battery_vbat_event(struct da9030_charger *charger)
+{
+	da9030_read_adc(charger, &charger->adc);
+
+	if (charger->is_on)
+		return;
+
+	if (charger->adc.vbat_res < charger->thresholds.vbat_low) {
+		/* set VBAT threshold for critical */
+		da903x_write(charger->master, DA9030_VBATMON,
+			     charger->thresholds.vbat_crit);
+		if (charger->battery_low)
+			charger->battery_low();
+	} else if (charger->adc.vbat_res <
+		   charger->thresholds.vbat_crit) {
+		/* notify the system of battery critical */
+		if (charger->battery_critical)
+			charger->battery_critical();
+	}
+}
+
+static int da9030_battery_event(struct notifier_block *nb, unsigned long event,
+				void *data)
+{
+	struct da9030_charger *charger =
+		container_of(nb, struct da9030_charger, nb);
+
+	switch (event) {
+	case DA9030_EVENT_CHDET:
+		cancel_delayed_work_sync(&charger->work);
+		schedule_work(&charger->work.work);
+		break;
+	case DA9030_EVENT_VBATMON:
+		da9030_battery_vbat_event(charger);
+		break;
+	case DA9030_EVENT_CHIOVER:
+	case DA9030_EVENT_TBAT:
+		da9030_set_charge(charger, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static void da9030_battery_convert_thresholds(struct da9030_charger *charger,
+					      struct da9030_battery_info *pdata)
+{
+	charger->thresholds.tbat_low = pdata->tbat_low;
+	charger->thresholds.tbat_high = pdata->tbat_high;
+	charger->thresholds.tbat_restart  = pdata->tbat_restart;
+
+	charger->thresholds.vbat_low =
+		da9030_millivolt_to_reg(pdata->vbat_low);
+	charger->thresholds.vbat_crit =
+		da9030_millivolt_to_reg(pdata->vbat_crit);
+	charger->thresholds.vbat_charge_start =
+		da9030_millivolt_to_reg(pdata->vbat_charge_start);
+	charger->thresholds.vbat_charge_stop =
+		da9030_millivolt_to_reg(pdata->vbat_charge_stop);
+	charger->thresholds.vbat_charge_restart =
+		da9030_millivolt_to_reg(pdata->vbat_charge_restart);
+
+	charger->thresholds.vcharge_min =
+		da9030_millivolt_to_reg(pdata->vcharge_min);
+	charger->thresholds.vcharge_max =
+		da9030_millivolt_to_reg(pdata->vcharge_max);
+}
+
+static void da9030_battery_setup_psy(struct da9030_charger *charger)
+{
+	struct power_supply_desc *psy_desc = &charger->psy_desc;
+	struct power_supply_info *info = charger->battery_info;
+
+	psy_desc->name = info->name;
+	psy_desc->use_for_apm = info->use_for_apm;
+	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	psy_desc->get_property = da9030_battery_get_property;
+
+	psy_desc->properties = da9030_battery_props;
+	psy_desc->num_properties = ARRAY_SIZE(da9030_battery_props);
+};
+
+static int da9030_battery_charger_init(struct da9030_charger *charger)
+{
+	char v[5];
+	int ret;
+
+	v[0] = v[1] = charger->thresholds.vbat_low;
+	v[2] = charger->thresholds.tbat_high;
+	v[3] = charger->thresholds.tbat_restart;
+	v[4] = charger->thresholds.tbat_low;
+
+	ret = da903x_writes(charger->master, DA9030_VBATMON, 5, v);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable reference voltage supply for ADC from the LDO_INTERNAL
+	 * regulator. Must be set before ADC measurements can be made.
+	 */
+	ret = da903x_write(charger->master, DA9030_ADC_MAN_CONTROL,
+			   DA9030_ADC_LDO_INT_ENABLE |
+			   DA9030_ADC_TBATREF_ENABLE);
+	if (ret)
+		return ret;
+
+	/* enable auto ADC measuremnts */
+	return da903x_write(charger->master, DA9030_ADC_AUTO_CONTROL,
+			    DA9030_ADC_TBAT_ENABLE | DA9030_ADC_VBAT_IN_TXON |
+			    DA9030_ADC_VCH_ENABLE | DA9030_ADC_ICH_ENABLE |
+			    DA9030_ADC_VBAT_ENABLE |
+			    DA9030_ADC_AUTO_SLEEP_ENABLE);
+}
+
+static int da9030_battery_probe(struct platform_device *pdev)
+{
+	struct da9030_charger *charger;
+	struct power_supply_config psy_cfg = {};
+	struct da9030_battery_info *pdata = pdev->dev.platform_data;
+	int ret;
+
+	if (pdata == NULL)
+		return -EINVAL;
+
+	if (pdata->charge_milliamp >= 1500 ||
+	    pdata->charge_millivolt < 4000 ||
+	    pdata->charge_millivolt > 4350)
+		return -EINVAL;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (charger == NULL)
+		return -ENOMEM;
+
+	charger->master = pdev->dev.parent;
+
+	/* 10 seconds between monitor runs unless platform defines other
+	   interval */
+	charger->interval = msecs_to_jiffies(
+		(pdata->batmon_interval ? : 10) * 1000);
+
+	charger->charge_milliamp = pdata->charge_milliamp;
+	charger->charge_millivolt = pdata->charge_millivolt;
+	charger->battery_info = pdata->battery_info;
+	charger->battery_low = pdata->battery_low;
+	charger->battery_critical = pdata->battery_critical;
+
+	da9030_battery_convert_thresholds(charger, pdata);
+
+	ret = da9030_battery_charger_init(charger);
+	if (ret)
+		goto err_charger_init;
+
+	INIT_DELAYED_WORK(&charger->work, da9030_charging_monitor);
+	schedule_delayed_work(&charger->work, charger->interval);
+
+	charger->nb.notifier_call = da9030_battery_event;
+	ret = da903x_register_notifier(charger->master, &charger->nb,
+				       DA9030_EVENT_CHDET |
+				       DA9030_EVENT_VBATMON |
+				       DA9030_EVENT_CHIOVER |
+				       DA9030_EVENT_TBAT);
+	if (ret)
+		goto err_notifier;
+
+	da9030_battery_setup_psy(charger);
+	psy_cfg.drv_data = charger;
+	charger->psy = power_supply_register(&pdev->dev, &charger->psy_desc,
+					     &psy_cfg);
+	if (IS_ERR(charger->psy)) {
+		ret = PTR_ERR(charger->psy);
+		goto err_ps_register;
+	}
+
+	charger->debug_file = da9030_bat_create_debugfs(charger);
+	platform_set_drvdata(pdev, charger);
+	return 0;
+
+err_ps_register:
+	da903x_unregister_notifier(charger->master, &charger->nb,
+				   DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
+				   DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
+err_notifier:
+	cancel_delayed_work(&charger->work);
+
+err_charger_init:
+	return ret;
+}
+
+static int da9030_battery_remove(struct platform_device *dev)
+{
+	struct da9030_charger *charger = platform_get_drvdata(dev);
+
+	da9030_bat_remove_debugfs(charger);
+
+	da903x_unregister_notifier(charger->master, &charger->nb,
+				   DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
+				   DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
+	cancel_delayed_work_sync(&charger->work);
+	da9030_set_charge(charger, 0);
+	power_supply_unregister(charger->psy);
+
+	return 0;
+}
+
+static struct platform_driver da903x_battery_driver = {
+	.driver	= {
+		.name	= "da903x-battery",
+	},
+	.probe = da9030_battery_probe,
+	.remove = da9030_battery_remove,
+};
+
+module_platform_driver(da903x_battery_driver);
+
+MODULE_DESCRIPTION("DA9030 battery charger driver");
+MODULE_AUTHOR("Mike Rapoport, CompuLab");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9052-battery.c b/drivers/power/supply/da9052-battery.c
new file mode 100644
index 000000000..d87bdecc9
--- /dev/null
+++ b/drivers/power/supply/da9052-battery.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Batttery Driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+#include <linux/mfd/da9052/reg.h>
+
+/* STATIC CONFIGURATION */
+#define DA9052_BAT_CUTOFF_VOLT		2800
+#define DA9052_BAT_TSH			62000
+#define DA9052_BAT_LOW_CAP		4
+#define DA9052_AVG_SZ			4
+#define DA9052_VC_TBL_SZ		68
+#define DA9052_VC_TBL_REF_SZ		3
+
+#define DA9052_ISET_USB_MASK		0x0F
+#define DA9052_CHG_USB_ILIM_MASK	0x40
+#define DA9052_CHG_LIM_COLS		16
+
+#define DA9052_MEAN(x, y)		((x + y) / 2)
+
+enum charger_type_enum {
+	DA9052_NOCHARGER = 1,
+	DA9052_CHARGER,
+};
+
+static const u16 da9052_chg_current_lim[2][DA9052_CHG_LIM_COLS] = {
+	{70,  80,  90,  100, 110, 120, 400,  450,
+	 500, 550, 600, 650, 700, 900, 1100, 1300},
+	{80,  90,  100, 110,  120,  400,  450,  500,
+	 550, 600, 800, 1000, 1200, 1400, 1600, 1800},
+};
+
+static const u16 vc_tbl_ref[3] = {10, 25, 40};
+/* Lookup table for voltage vs capacity */
+static u32 const vc_tbl[3][68][2] = {
+	/* For temperature 10 degree Celsius */
+	{
+	{4082, 100}, {4036, 98},
+	{4020, 96}, {4008, 95},
+	{3997, 93}, {3983, 91},
+	{3964, 90}, {3943, 88},
+	{3926, 87}, {3912, 85},
+	{3900, 84}, {3890, 82},
+	{3881, 80}, {3873, 79},
+	{3865, 77}, {3857, 76},
+	{3848, 74}, {3839, 73},
+	{3829, 71}, {3820, 70},
+	{3811, 68}, {3802, 67},
+	{3794, 65}, {3785, 64},
+	{3778, 62}, {3770, 61},
+	{3763, 59}, {3756, 58},
+	{3750, 56}, {3744, 55},
+	{3738, 53}, {3732, 52},
+	{3727, 50}, {3722, 49},
+	{3717, 47}, {3712, 46},
+	{3708, 44}, {3703, 43},
+	{3700, 41}, {3696, 40},
+	{3693, 38}, {3691, 37},
+	{3688, 35}, {3686, 34},
+	{3683, 32}, {3681, 31},
+	{3678, 29}, {3675, 28},
+	{3672, 26}, {3669, 25},
+	{3665, 23}, {3661, 22},
+	{3656, 21}, {3651, 19},
+	{3645, 18}, {3639, 16},
+	{3631, 15}, {3622, 13},
+	{3611, 12}, {3600, 10},
+	{3587, 9}, {3572, 7},
+	{3548, 6}, {3503, 5},
+	{3420, 3}, {3268, 2},
+	{2992, 1}, {2746, 0}
+	},
+	/* For temperature 25 degree Celsius */
+	{
+	{4102, 100}, {4065, 98},
+	{4048, 96}, {4034, 95},
+	{4021, 93}, {4011, 92},
+	{4001, 90}, {3986, 88},
+	{3968, 87}, {3952, 85},
+	{3938, 84}, {3926, 82},
+	{3916, 81}, {3908, 79},
+	{3900, 77}, {3892, 76},
+	{3883, 74}, {3874, 73},
+	{3864, 71}, {3855, 70},
+	{3846, 68}, {3836, 67},
+	{3827, 65}, {3819, 64},
+	{3810, 62}, {3801, 61},
+	{3793, 59}, {3786, 58},
+	{3778, 56}, {3772, 55},
+	{3765, 53}, {3759, 52},
+	{3754, 50}, {3748, 49},
+	{3743, 47}, {3738, 46},
+	{3733, 44}, {3728, 43},
+	{3724, 41}, {3720, 40},
+	{3716, 38}, {3712, 37},
+	{3709, 35}, {3706, 34},
+	{3703, 33}, {3701, 31},
+	{3698, 30}, {3696, 28},
+	{3693, 27}, {3690, 25},
+	{3687, 24}, {3683, 22},
+	{3680, 21}, {3675, 19},
+	{3671, 18}, {3666, 17},
+	{3660, 15}, {3654, 14},
+	{3647, 12}, {3639, 11},
+	{3630, 9}, {3621, 8},
+	{3613, 6}, {3606, 5},
+	{3597, 4}, {3582, 2},
+	{3546, 1}, {2747, 0}
+	},
+	/* For temperature 40 degree Celsius */
+	{
+	{4114, 100}, {4081, 98},
+	{4065, 96}, {4050, 95},
+	{4036, 93}, {4024, 92},
+	{4013, 90}, {4002, 88},
+	{3990, 87}, {3976, 85},
+	{3962, 84}, {3950, 82},
+	{3939, 81}, {3930, 79},
+	{3921, 77}, {3912, 76},
+	{3902, 74}, {3893, 73},
+	{3883, 71}, {3874, 70},
+	{3865, 68}, {3856, 67},
+	{3847, 65}, {3838, 64},
+	{3829, 62}, {3820, 61},
+	{3812, 59}, {3803, 58},
+	{3795, 56}, {3787, 55},
+	{3780, 53}, {3773, 52},
+	{3767, 50}, {3761, 49},
+	{3756, 47}, {3751, 46},
+	{3746, 44}, {3741, 43},
+	{3736, 41}, {3732, 40},
+	{3728, 38}, {3724, 37},
+	{3720, 35}, {3716, 34},
+	{3713, 33}, {3710, 31},
+	{3707, 30}, {3704, 28},
+	{3701, 27}, {3698, 25},
+	{3695, 24}, {3691, 22},
+	{3686, 21}, {3681, 19},
+	{3676, 18}, {3671, 17},
+	{3666, 15}, {3661, 14},
+	{3655, 12}, {3648, 11},
+	{3640, 9}, {3632, 8},
+	{3622, 6}, {3616, 5},
+	{3611, 4}, {3604, 2},
+	{3594, 1}, {2747, 0}
+	}
+};
+
+struct da9052_battery {
+	struct da9052 *da9052;
+	struct power_supply *psy;
+	struct notifier_block nb;
+	int charger_type;
+	int status;
+	int health;
+};
+
+static inline int volt_reg_to_mV(int value)
+{
+	return ((value * 1000) / 512) + 2500;
+}
+
+static inline int ichg_reg_to_mA(int value)
+{
+	return (value * 3900) / 1000;
+}
+
+static int da9052_read_chgend_current(struct da9052_battery *bat,
+				       int *current_mA)
+{
+	int ret;
+
+	if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+		return -EINVAL;
+
+	ret = da9052_reg_read(bat->da9052, DA9052_ICHG_END_REG);
+	if (ret < 0)
+		return ret;
+
+	*current_mA = ichg_reg_to_mA(ret & DA9052_ICHGEND_ICHGEND);
+
+	return 0;
+}
+
+static int da9052_read_chg_current(struct da9052_battery *bat, int *current_mA)
+{
+	int ret;
+
+	if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+		return -EINVAL;
+
+	ret = da9052_reg_read(bat->da9052, DA9052_ICHG_AV_REG);
+	if (ret < 0)
+		return ret;
+
+	*current_mA = ichg_reg_to_mA(ret & DA9052_ICHGAV_ICHGAV);
+
+	return 0;
+}
+
+static int da9052_bat_check_status(struct da9052_battery *bat, int *status)
+{
+	u8 v[2] = {0, 0};
+	u8 bat_status;
+	u8 chg_end;
+	int ret;
+	int chg_current;
+	int chg_end_current;
+	bool dcinsel;
+	bool dcindet;
+	bool vbussel;
+	bool vbusdet;
+	bool dc;
+	bool vbus;
+
+	ret = da9052_group_read(bat->da9052, DA9052_STATUS_A_REG, 2, v);
+	if (ret < 0)
+		return ret;
+
+	bat_status = v[0];
+	chg_end = v[1];
+
+	dcinsel = bat_status & DA9052_STATUSA_DCINSEL;
+	dcindet = bat_status & DA9052_STATUSA_DCINDET;
+	vbussel = bat_status & DA9052_STATUSA_VBUSSEL;
+	vbusdet = bat_status & DA9052_STATUSA_VBUSDET;
+	dc = dcinsel && dcindet;
+	vbus = vbussel && vbusdet;
+
+	/* Preference to WALL(DCIN) charger unit */
+	if (dc || vbus) {
+		bat->charger_type = DA9052_CHARGER;
+
+		/* If charging end flag is set and Charging current is greater
+		 * than charging end limit then battery is charging
+		*/
+		if ((chg_end & DA9052_STATUSB_CHGEND) != 0) {
+			ret = da9052_read_chg_current(bat, &chg_current);
+			if (ret < 0)
+				return ret;
+			ret = da9052_read_chgend_current(bat, &chg_end_current);
+			if (ret < 0)
+				return ret;
+
+			if (chg_current >= chg_end_current)
+				bat->status = POWER_SUPPLY_STATUS_CHARGING;
+			else
+				bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		} else {
+			/* If Charging end flag is cleared then battery is
+			 * charging
+			*/
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else if (dcindet || vbusdet) {
+			bat->charger_type = DA9052_CHARGER;
+			bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		bat->charger_type = DA9052_NOCHARGER;
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (status != NULL)
+		*status = bat->status;
+	return 0;
+}
+
+static int da9052_bat_read_volt(struct da9052_battery *bat, int *volt_mV)
+{
+	int volt;
+
+	volt = da9052_adc_manual_read(bat->da9052, DA9052_ADC_MAN_MUXSEL_VBAT);
+	if (volt < 0)
+		return volt;
+
+	*volt_mV = volt_reg_to_mV(volt);
+
+	return 0;
+}
+
+static int da9052_bat_check_presence(struct da9052_battery *bat, int *illegal)
+{
+	int bat_temp;
+
+	bat_temp = da9052_adc_read_temp(bat->da9052);
+	if (bat_temp < 0)
+		return bat_temp;
+
+	if (bat_temp > DA9052_BAT_TSH)
+		*illegal = 1;
+	else
+		*illegal = 0;
+
+	return 0;
+}
+
+static int da9052_bat_interpolate(int vbat_lower, int  vbat_upper,
+				   int level_lower, int level_upper,
+				   int bat_voltage)
+{
+	int tmp;
+
+	tmp = ((level_upper - level_lower) * 1000) / (vbat_upper - vbat_lower);
+	tmp = level_lower + (((bat_voltage - vbat_lower) * tmp) / 1000);
+
+	return tmp;
+}
+
+static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
+{
+	int i;
+
+	if (adc_temp <= vc_tbl_ref[0])
+		return 0;
+
+	if (adc_temp > vc_tbl_ref[DA9052_VC_TBL_REF_SZ - 1])
+		return DA9052_VC_TBL_REF_SZ - 1;
+
+	for (i = 0; i < DA9052_VC_TBL_REF_SZ - 1; i++) {
+		if ((adc_temp > vc_tbl_ref[i]) &&
+		    (adc_temp <= DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1])))
+				return i;
+		if ((adc_temp > DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1]))
+		     && (adc_temp <= vc_tbl_ref[i]))
+				return i + 1;
+	}
+	/*
+	 * For some reason authors of the driver didn't presume that we can
+	 * end up here. It might be OK, but might be not, no one knows for
+	 * sure. Go check your battery, is it on fire?
+	 */
+	WARN_ON(1);
+	return 0;
+}
+
+static int da9052_bat_read_capacity(struct da9052_battery *bat, int *capacity)
+{
+	int adc_temp;
+	int bat_voltage;
+	int vbat_lower;
+	int vbat_upper;
+	int level_upper;
+	int level_lower;
+	int ret;
+	int flag;
+	int i = 0;
+	int j;
+
+	ret = da9052_bat_read_volt(bat, &bat_voltage);
+	if (ret < 0)
+		return ret;
+
+	adc_temp = da9052_adc_read_temp(bat->da9052);
+	if (adc_temp < 0)
+		return adc_temp;
+
+	i = da9052_determine_vc_tbl_index(adc_temp);
+
+	if (bat_voltage >= vc_tbl[i][0][0]) {
+		*capacity = 100;
+		return 0;
+	}
+	if (bat_voltage <= vc_tbl[i][DA9052_VC_TBL_SZ - 1][0]) {
+		*capacity = 0;
+		return 0;
+	}
+	flag = 0;
+
+	for (j = 0; j < (DA9052_VC_TBL_SZ-1); j++) {
+		if ((bat_voltage <= vc_tbl[i][j][0]) &&
+		    (bat_voltage >= vc_tbl[i][j + 1][0])) {
+			vbat_upper = vc_tbl[i][j][0];
+			vbat_lower = vc_tbl[i][j + 1][0];
+			level_upper = vc_tbl[i][j][1];
+			level_lower = vc_tbl[i][j + 1][1];
+			flag = 1;
+			break;
+		}
+	}
+	if (!flag)
+		return -EIO;
+
+	*capacity = da9052_bat_interpolate(vbat_lower, vbat_upper, level_lower,
+					   level_upper, bat_voltage);
+
+	return 0;
+}
+
+static int da9052_bat_check_health(struct da9052_battery *bat, int *health)
+{
+	int ret;
+	int bat_illegal;
+	int capacity;
+
+	ret = da9052_bat_check_presence(bat, &bat_illegal);
+	if (ret < 0)
+		return ret;
+
+	if (bat_illegal) {
+		bat->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		return 0;
+	}
+
+	if (bat->health != POWER_SUPPLY_HEALTH_OVERHEAT) {
+		ret = da9052_bat_read_capacity(bat, &capacity);
+		if (ret < 0)
+			return ret;
+		if (capacity < DA9052_BAT_LOW_CAP)
+			bat->health = POWER_SUPPLY_HEALTH_DEAD;
+		else
+			bat->health = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	*health = bat->health;
+
+	return 0;
+}
+
+static irqreturn_t da9052_bat_irq(int irq, void *data)
+{
+	struct da9052_battery *bat = data;
+	int virq;
+
+	virq = regmap_irq_get_virq(bat->da9052->irq_data, irq);
+	irq -= virq;
+
+	if (irq == DA9052_IRQ_CHGEND)
+		bat->status = POWER_SUPPLY_STATUS_FULL;
+	else
+		da9052_bat_check_status(bat, NULL);
+
+	if (irq == DA9052_IRQ_CHGEND || irq == DA9052_IRQ_DCIN ||
+	    irq == DA9052_IRQ_VBUS || irq == DA9052_IRQ_TBAT) {
+		power_supply_changed(bat->psy);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int da9052_USB_current_notifier(struct notifier_block *nb,
+					unsigned long events, void *data)
+{
+	u8 row;
+	u8 col;
+	int *current_mA = data;
+	int ret;
+	struct da9052_battery *bat = container_of(nb, struct da9052_battery,
+						  nb);
+
+	if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+		return -EPERM;
+
+	ret = da9052_reg_read(bat->da9052, DA9052_CHGBUCK_REG);
+	if (ret & DA9052_CHG_USB_ILIM_MASK)
+		return -EPERM;
+
+	if (bat->da9052->chip_id == DA9052)
+		row = 0;
+	else
+		row = 1;
+
+	if (*current_mA < da9052_chg_current_lim[row][0] ||
+	    *current_mA > da9052_chg_current_lim[row][DA9052_CHG_LIM_COLS - 1])
+		return -EINVAL;
+
+	for (col = 0; col <= DA9052_CHG_LIM_COLS - 1 ; col++) {
+		if (*current_mA <= da9052_chg_current_lim[row][col])
+			break;
+	}
+
+	return da9052_reg_update(bat->da9052, DA9052_ISET_REG,
+				 DA9052_ISET_USB_MASK, col);
+}
+
+static int da9052_bat_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	int ret;
+	int illegal;
+	struct da9052_battery *bat = power_supply_get_drvdata(psy);
+
+	ret = da9052_bat_check_presence(bat, &illegal);
+	if (ret < 0)
+		return ret;
+
+	if (illegal && psp != POWER_SUPPLY_PROP_PRESENT)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = da9052_bat_check_status(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval =
+			(bat->charger_type == DA9052_NOCHARGER) ? 0 : 1;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = da9052_bat_check_presence(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = da9052_bat_check_health(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = DA9052_BAT_CUTOFF_VOLT * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = da9052_bat_read_volt(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = da9052_read_chg_current(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = da9052_bat_read_capacity(bat, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = da9052_adc_read_temp(bat->da9052);
+		ret = val->intval;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return ret;
+}
+
+static enum power_supply_property da9052_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static struct power_supply_desc psy_desc = {
+	.name		= "da9052-bat",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= da9052_bat_props,
+	.num_properties	= ARRAY_SIZE(da9052_bat_props),
+	.get_property	= da9052_bat_get_property,
+};
+
+static char *da9052_bat_irqs[] = {
+	"BATT TEMP",
+	"DCIN DET",
+	"DCIN REM",
+	"VBUS DET",
+	"VBUS REM",
+	"CHG END",
+};
+
+static int da9052_bat_irq_bits[] = {
+	DA9052_IRQ_TBAT,
+	DA9052_IRQ_DCIN,
+	DA9052_IRQ_DCINREM,
+	DA9052_IRQ_VBUS,
+	DA9052_IRQ_VBUSREM,
+	DA9052_IRQ_CHGEND,
+};
+
+static s32 da9052_bat_probe(struct platform_device *pdev)
+{
+	struct da9052_pdata *pdata;
+	struct da9052_battery *bat;
+	struct power_supply_config psy_cfg = {};
+	int ret;
+	int i;
+
+	bat = devm_kzalloc(&pdev->dev, sizeof(struct da9052_battery),
+				GFP_KERNEL);
+	if (!bat)
+		return -ENOMEM;
+
+	psy_cfg.drv_data = bat;
+
+	bat->da9052 = dev_get_drvdata(pdev->dev.parent);
+	bat->charger_type = DA9052_NOCHARGER;
+	bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	bat->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+	bat->nb.notifier_call = da9052_USB_current_notifier;
+
+	pdata = bat->da9052->dev->platform_data;
+	if (pdata != NULL && pdata->use_for_apm)
+		psy_desc.use_for_apm = pdata->use_for_apm;
+	else
+		psy_desc.use_for_apm = 1;
+
+	for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+		ret = da9052_request_irq(bat->da9052,
+				da9052_bat_irq_bits[i], da9052_bat_irqs[i],
+				da9052_bat_irq, bat);
+
+		if (ret != 0) {
+			dev_err(bat->da9052->dev,
+				"DA9052 failed to request %s IRQ: %d\n",
+				da9052_bat_irqs[i], ret);
+			goto err;
+		}
+	}
+
+	bat->psy = power_supply_register(&pdev->dev, &psy_desc, &psy_cfg);
+	if (IS_ERR(bat->psy)) {
+		ret = PTR_ERR(bat->psy);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, bat);
+	return 0;
+
+err:
+	while (--i >= 0)
+		da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
+
+	return ret;
+}
+static int da9052_bat_remove(struct platform_device *pdev)
+{
+	int i;
+	struct da9052_battery *bat = platform_get_drvdata(pdev);
+
+	for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++)
+		da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
+
+	power_supply_unregister(bat->psy);
+
+	return 0;
+}
+
+static struct platform_driver da9052_bat_driver = {
+	.probe = da9052_bat_probe,
+	.remove = da9052_bat_remove,
+	.driver = {
+		.name = "da9052-bat",
+	},
+};
+module_platform_driver(da9052_bat_driver);
+
+MODULE_DESCRIPTION("DA9052 BAT Device Driver");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-bat");
diff --git a/drivers/power/supply/da9150-charger.c b/drivers/power/supply/da9150-charger.c
new file mode 100644
index 000000000..6b987da58
--- /dev/null
+++ b/drivers/power/supply/da9150-charger.c
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DA9150 Charger Driver
+ *
+ * Copyright (c) 2014 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/usb/phy.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+
+/* Private data */
+struct da9150_charger {
+	struct da9150 *da9150;
+	struct device *dev;
+
+	struct power_supply *usb;
+	struct power_supply *battery;
+	struct power_supply *supply_online;
+
+	struct usb_phy *usb_phy;
+	struct notifier_block otg_nb;
+	struct work_struct otg_work;
+	unsigned long usb_event;
+
+	struct iio_channel *ibus_chan;
+	struct iio_channel *vbus_chan;
+	struct iio_channel *tjunc_chan;
+	struct iio_channel *vbat_chan;
+};
+
+static inline int da9150_charger_supply_online(struct da9150_charger *charger,
+					       struct power_supply *psy,
+					       union power_supply_propval *val)
+{
+	val->intval = (psy == charger->supply_online) ? 1 : 0;
+
+	return 0;
+}
+
+/* Charger Properties */
+static int da9150_charger_vbus_voltage_now(struct da9150_charger *charger,
+					   union power_supply_propval *val)
+{
+	int v_val, ret;
+
+	/* Read processed value - mV units */
+	ret = iio_read_channel_processed(charger->vbus_chan, &v_val);
+	if (ret < 0)
+		return ret;
+
+	/* Convert voltage to expected uV units */
+	val->intval = v_val * 1000;
+
+	return 0;
+}
+
+static int da9150_charger_ibus_current_avg(struct da9150_charger *charger,
+					   union power_supply_propval *val)
+{
+	int i_val, ret;
+
+	/* Read processed value - mA units */
+	ret = iio_read_channel_processed(charger->ibus_chan, &i_val);
+	if (ret < 0)
+		return ret;
+
+	/* Convert current to expected uA units */
+	val->intval = i_val * 1000;
+
+	return 0;
+}
+
+static int da9150_charger_tjunc_temp(struct da9150_charger *charger,
+				     union power_supply_propval *val)
+{
+	int t_val, ret;
+
+	/* Read processed value - 0.001 degrees C units */
+	ret = iio_read_channel_processed(charger->tjunc_chan, &t_val);
+	if (ret < 0)
+		return ret;
+
+	/* Convert temp to expect 0.1 degrees C units */
+	val->intval = t_val / 100;
+
+	return 0;
+}
+
+static enum power_supply_property da9150_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int da9150_charger_get_prop(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct da9150_charger *charger = dev_get_drvdata(psy->dev.parent);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = da9150_charger_supply_online(charger, psy, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = da9150_charger_vbus_voltage_now(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = da9150_charger_ibus_current_avg(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = da9150_charger_tjunc_temp(charger, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/* Battery Properties */
+static int da9150_charger_battery_status(struct da9150_charger *charger,
+					 union power_supply_propval *val)
+{
+	u8 reg;
+
+	/* Check to see if battery is discharging */
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
+
+	if (((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_OFF) ||
+	    ((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_WAIT)) {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+		return 0;
+	}
+
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+	/* Now check for other states */
+	switch (reg & DA9150_CHG_STAT_MASK) {
+	case DA9150_CHG_STAT_ACT:
+	case DA9150_CHG_STAT_PRE:
+	case DA9150_CHG_STAT_CC:
+	case DA9150_CHG_STAT_CV:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case DA9150_CHG_STAT_OFF:
+	case DA9150_CHG_STAT_SUSP:
+	case DA9150_CHG_STAT_TEMP:
+	case DA9150_CHG_STAT_TIME:
+	case DA9150_CHG_STAT_BAT:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case DA9150_CHG_STAT_FULL:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static int da9150_charger_battery_health(struct da9150_charger *charger,
+					 union power_supply_propval *val)
+{
+	u8 reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+	/* Check if temperature limit reached */
+	switch (reg & DA9150_CHG_TEMP_MASK) {
+	case DA9150_CHG_TEMP_UNDER:
+		val->intval = POWER_SUPPLY_HEALTH_COLD;
+		return 0;
+	case DA9150_CHG_TEMP_OVER:
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		return 0;
+	default:
+		break;
+	}
+
+	/* Check for other health states */
+	switch (reg & DA9150_CHG_STAT_MASK) {
+	case DA9150_CHG_STAT_ACT:
+	case DA9150_CHG_STAT_PRE:
+		val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		break;
+	case DA9150_CHG_STAT_TIME:
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	}
+
+	return 0;
+}
+
+static int da9150_charger_battery_present(struct da9150_charger *charger,
+					  union power_supply_propval *val)
+{
+	u8 reg;
+
+	/* Check if battery present or removed */
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+	if ((reg & DA9150_CHG_STAT_MASK) == DA9150_CHG_STAT_BAT)
+		val->intval = 0;
+	else
+		val->intval = 1;
+
+	return 0;
+}
+
+static int da9150_charger_battery_charge_type(struct da9150_charger *charger,
+					      union power_supply_propval *val)
+{
+	u8 reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+	switch (reg & DA9150_CHG_STAT_MASK) {
+	case DA9150_CHG_STAT_CC:
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case DA9150_CHG_STAT_ACT:
+	case DA9150_CHG_STAT_PRE:
+	case DA9150_CHG_STAT_CV:
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	return 0;
+}
+
+static int da9150_charger_battery_voltage_min(struct da9150_charger *charger,
+					      union power_supply_propval *val)
+{
+	u8 reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_C);
+
+	/* Value starts at 2500 mV, 50 mV increments, presented in uV */
+	val->intval = ((reg & DA9150_CHG_VFAULT_MASK) * 50000) + 2500000;
+
+	return 0;
+}
+
+static int da9150_charger_battery_voltage_now(struct da9150_charger *charger,
+					      union power_supply_propval *val)
+{
+	int v_val, ret;
+
+	/* Read processed value - mV units */
+	ret = iio_read_channel_processed(charger->vbat_chan, &v_val);
+	if (ret < 0)
+		return ret;
+
+	val->intval = v_val * 1000;
+
+	return 0;
+}
+
+static int da9150_charger_battery_current_max(struct da9150_charger *charger,
+					      union power_supply_propval *val)
+{
+	int reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_D);
+
+	/* 25mA increments */
+	val->intval = reg * 25000;
+
+	return 0;
+}
+
+static int da9150_charger_battery_voltage_max(struct da9150_charger *charger,
+					      union power_supply_propval *val)
+{
+	u8 reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_B);
+
+	/* Value starts at 3650 mV, 25 mV increments, presented in uV */
+	val->intval = ((reg & DA9150_CHG_VBAT_MASK) * 25000) + 3650000;
+	return 0;
+}
+
+static enum power_supply_property da9150_charger_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static int da9150_charger_battery_get_prop(struct power_supply *psy,
+					   enum power_supply_property psp,
+					   union power_supply_propval *val)
+{
+	struct da9150_charger *charger = dev_get_drvdata(psy->dev.parent);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = da9150_charger_battery_status(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = da9150_charger_supply_online(charger, psy, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = da9150_charger_battery_health(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = da9150_charger_battery_present(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = da9150_charger_battery_charge_type(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		ret = da9150_charger_battery_voltage_min(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = da9150_charger_battery_voltage_now(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		ret = da9150_charger_battery_current_max(charger, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = da9150_charger_battery_voltage_max(charger, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static irqreturn_t da9150_charger_chg_irq(int irq, void *data)
+{
+	struct da9150_charger *charger = data;
+
+	power_supply_changed(charger->battery);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_tjunc_irq(int irq, void *data)
+{
+	struct da9150_charger *charger = data;
+
+	/* Nothing we can really do except report this. */
+	dev_crit(charger->dev, "TJunc over temperature!!!\n");
+	power_supply_changed(charger->usb);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_vfault_irq(int irq, void *data)
+{
+	struct da9150_charger *charger = data;
+
+	/* Nothing we can really do except report this. */
+	dev_crit(charger->dev, "VSYS under voltage!!!\n");
+	power_supply_changed(charger->usb);
+	power_supply_changed(charger->battery);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_vbus_irq(int irq, void *data)
+{
+	struct da9150_charger *charger = data;
+	u8 reg;
+
+	reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
+
+	/* Charger plugged in or battery only */
+	switch (reg & DA9150_VBUS_STAT_MASK) {
+	case DA9150_VBUS_STAT_OFF:
+	case DA9150_VBUS_STAT_WAIT:
+		charger->supply_online = charger->battery;
+		break;
+	case DA9150_VBUS_STAT_CHG:
+		charger->supply_online = charger->usb;
+		break;
+	default:
+		dev_warn(charger->dev, "Unknown VBUS state - reg = 0x%x\n",
+			 reg);
+		charger->supply_online = NULL;
+		break;
+	}
+
+	power_supply_changed(charger->usb);
+	power_supply_changed(charger->battery);
+
+	return IRQ_HANDLED;
+}
+
+static void da9150_charger_otg_work(struct work_struct *data)
+{
+	struct da9150_charger *charger =
+		container_of(data, struct da9150_charger, otg_work);
+
+	switch (charger->usb_event) {
+	case USB_EVENT_ID:
+		/* Enable OTG Boost */
+		da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
+				DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_OTG);
+		break;
+	case USB_EVENT_NONE:
+		/* Revert to charge mode */
+		power_supply_changed(charger->usb);
+		power_supply_changed(charger->battery);
+		da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
+				DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_CHG);
+		break;
+	}
+}
+
+static int da9150_charger_otg_ncb(struct notifier_block *nb, unsigned long val,
+				  void *priv)
+{
+	struct da9150_charger *charger =
+		container_of(nb, struct da9150_charger, otg_nb);
+
+	dev_dbg(charger->dev, "DA9150 OTG notify %lu\n", val);
+
+	charger->usb_event = val;
+	schedule_work(&charger->otg_work);
+
+	return NOTIFY_OK;
+}
+
+static int da9150_charger_register_irq(struct platform_device *pdev,
+				       irq_handler_t handler,
+				       const char *irq_name)
+{
+	struct device *dev = &pdev->dev;
+	struct da9150_charger *charger = platform_get_drvdata(pdev);
+	int irq, ret;
+
+	irq = platform_get_irq_byname(pdev, irq_name);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get IRQ CHG_STATUS: %d\n", irq);
+		return irq;
+	}
+
+	ret = request_threaded_irq(irq, NULL, handler, IRQF_ONESHOT, irq_name,
+				   charger);
+	if (ret)
+		dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
+
+	return ret;
+}
+
+static void da9150_charger_unregister_irq(struct platform_device *pdev,
+					  const char *irq_name)
+{
+	struct device *dev = &pdev->dev;
+	struct da9150_charger *charger = platform_get_drvdata(pdev);
+	int irq;
+
+	irq = platform_get_irq_byname(pdev, irq_name);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get IRQ CHG_STATUS: %d\n", irq);
+		return;
+	}
+
+	free_irq(irq, charger);
+}
+
+static const struct power_supply_desc usb_desc = {
+	.name		= "da9150-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= da9150_charger_props,
+	.num_properties	= ARRAY_SIZE(da9150_charger_props),
+	.get_property	= da9150_charger_get_prop,
+};
+
+static const struct power_supply_desc battery_desc = {
+	.name		= "da9150-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= da9150_charger_bat_props,
+	.num_properties	= ARRAY_SIZE(da9150_charger_bat_props),
+	.get_property	= da9150_charger_battery_get_prop,
+};
+
+static int da9150_charger_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct da9150 *da9150 = dev_get_drvdata(dev->parent);
+	struct da9150_charger *charger;
+	u8 reg;
+	int ret;
+
+	charger = devm_kzalloc(dev, sizeof(struct da9150_charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, charger);
+	charger->da9150 = da9150;
+	charger->dev = dev;
+
+	/* Acquire ADC channels */
+	charger->ibus_chan = iio_channel_get(dev, "CHAN_IBUS");
+	if (IS_ERR(charger->ibus_chan)) {
+		ret = PTR_ERR(charger->ibus_chan);
+		goto ibus_chan_fail;
+	}
+
+	charger->vbus_chan = iio_channel_get(dev, "CHAN_VBUS");
+	if (IS_ERR(charger->vbus_chan)) {
+		ret = PTR_ERR(charger->vbus_chan);
+		goto vbus_chan_fail;
+	}
+
+	charger->tjunc_chan = iio_channel_get(dev, "CHAN_TJUNC");
+	if (IS_ERR(charger->tjunc_chan)) {
+		ret = PTR_ERR(charger->tjunc_chan);
+		goto tjunc_chan_fail;
+	}
+
+	charger->vbat_chan = iio_channel_get(dev, "CHAN_VBAT");
+	if (IS_ERR(charger->vbat_chan)) {
+		ret = PTR_ERR(charger->vbat_chan);
+		goto vbat_chan_fail;
+	}
+
+	/* Register power supplies */
+	charger->usb = power_supply_register(dev, &usb_desc, NULL);
+	if (IS_ERR(charger->usb)) {
+		ret = PTR_ERR(charger->usb);
+		goto usb_fail;
+	}
+
+	charger->battery = power_supply_register(dev, &battery_desc, NULL);
+	if (IS_ERR(charger->battery)) {
+		ret = PTR_ERR(charger->battery);
+		goto battery_fail;
+	}
+
+	/* Get initial online supply */
+	reg = da9150_reg_read(da9150, DA9150_STATUS_H);
+
+	switch (reg & DA9150_VBUS_STAT_MASK) {
+	case DA9150_VBUS_STAT_OFF:
+	case DA9150_VBUS_STAT_WAIT:
+		charger->supply_online = charger->battery;
+		break;
+	case DA9150_VBUS_STAT_CHG:
+		charger->supply_online = charger->usb;
+		break;
+	default:
+		dev_warn(dev, "Unknown VBUS state - reg = 0x%x\n", reg);
+		charger->supply_online = NULL;
+		break;
+	}
+
+	/* Setup OTG reporting & configuration */
+	charger->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (!IS_ERR_OR_NULL(charger->usb_phy)) {
+		INIT_WORK(&charger->otg_work, da9150_charger_otg_work);
+		charger->otg_nb.notifier_call = da9150_charger_otg_ncb;
+		usb_register_notifier(charger->usb_phy, &charger->otg_nb);
+	}
+
+	/* Register IRQs */
+	ret = da9150_charger_register_irq(pdev, da9150_charger_chg_irq,
+					  "CHG_STATUS");
+	if (ret < 0)
+		goto chg_irq_fail;
+
+	ret = da9150_charger_register_irq(pdev, da9150_charger_tjunc_irq,
+					  "CHG_TJUNC");
+	if (ret < 0)
+		goto tjunc_irq_fail;
+
+	ret = da9150_charger_register_irq(pdev, da9150_charger_vfault_irq,
+					  "CHG_VFAULT");
+	if (ret < 0)
+		goto vfault_irq_fail;
+
+	ret = da9150_charger_register_irq(pdev, da9150_charger_vbus_irq,
+					  "CHG_VBUS");
+	if (ret < 0)
+		goto vbus_irq_fail;
+
+	return 0;
+
+
+vbus_irq_fail:
+	da9150_charger_unregister_irq(pdev, "CHG_VFAULT");
+vfault_irq_fail:
+	da9150_charger_unregister_irq(pdev, "CHG_TJUNC");
+tjunc_irq_fail:
+	da9150_charger_unregister_irq(pdev, "CHG_STATUS");
+chg_irq_fail:
+	if (!IS_ERR_OR_NULL(charger->usb_phy))
+		usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
+battery_fail:
+	power_supply_unregister(charger->usb);
+
+usb_fail:
+	iio_channel_release(charger->vbat_chan);
+
+vbat_chan_fail:
+	iio_channel_release(charger->tjunc_chan);
+
+tjunc_chan_fail:
+	iio_channel_release(charger->vbus_chan);
+
+vbus_chan_fail:
+	iio_channel_release(charger->ibus_chan);
+
+ibus_chan_fail:
+	return ret;
+}
+
+static int da9150_charger_remove(struct platform_device *pdev)
+{
+	struct da9150_charger *charger = platform_get_drvdata(pdev);
+	int irq;
+
+	/* Make sure IRQs are released before unregistering power supplies */
+	irq = platform_get_irq_byname(pdev, "CHG_VBUS");
+	free_irq(irq, charger);
+
+	irq = platform_get_irq_byname(pdev, "CHG_VFAULT");
+	free_irq(irq, charger);
+
+	irq = platform_get_irq_byname(pdev, "CHG_TJUNC");
+	free_irq(irq, charger);
+
+	irq = platform_get_irq_byname(pdev, "CHG_STATUS");
+	free_irq(irq, charger);
+
+	if (!IS_ERR_OR_NULL(charger->usb_phy))
+		usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
+	cancel_work_sync(&charger->otg_work);
+
+	power_supply_unregister(charger->battery);
+	power_supply_unregister(charger->usb);
+
+	/* Release ADC channels */
+	iio_channel_release(charger->ibus_chan);
+	iio_channel_release(charger->vbus_chan);
+	iio_channel_release(charger->tjunc_chan);
+	iio_channel_release(charger->vbat_chan);
+
+	return 0;
+}
+
+static struct platform_driver da9150_charger_driver = {
+	.driver = {
+		.name = "da9150-charger",
+	},
+	.probe = da9150_charger_probe,
+	.remove = da9150_charger_remove,
+};
+
+module_platform_driver(da9150_charger_driver);
+
+MODULE_DESCRIPTION("Charger Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9150-fg.c b/drivers/power/supply/da9150-fg.c
new file mode 100644
index 000000000..8c5e2c49d
--- /dev/null
+++ b/drivers/power/supply/da9150-fg.c
@@ -0,0 +1,562 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DA9150 Fuel-Gauge Driver
+ *
+ * Copyright (c) 2015 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/list.h>
+#include <asm/div64.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+#include <linux/devm-helpers.h>
+
+/* Core2Wire */
+#define DA9150_QIF_READ		(0x0 << 7)
+#define DA9150_QIF_WRITE	(0x1 << 7)
+#define DA9150_QIF_CODE_MASK	0x7F
+
+#define DA9150_QIF_BYTE_SIZE	8
+#define DA9150_QIF_BYTE_MASK	0xFF
+#define DA9150_QIF_SHORT_SIZE	2
+#define DA9150_QIF_LONG_SIZE	4
+
+/* QIF Codes */
+#define DA9150_QIF_UAVG			6
+#define DA9150_QIF_UAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_IAVG			8
+#define DA9150_QIF_IAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_NTCAVG		12
+#define DA9150_QIF_NTCAVG_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_SHUNT_VAL		36
+#define DA9150_QIF_SHUNT_VAL_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SD_GAIN		38
+#define DA9150_QIF_SD_GAIN_SIZE		DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_FCC_MAH		40
+#define DA9150_QIF_FCC_MAH_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SOC_PCT		43
+#define DA9150_QIF_SOC_PCT_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_CHARGE_LIMIT		44
+#define DA9150_QIF_CHARGE_LIMIT_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_DISCHARGE_LIMIT	45
+#define DA9150_QIF_DISCHARGE_LIMIT_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_FW_MAIN_VER		118
+#define DA9150_QIF_FW_MAIN_VER_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_E_FG_STATUS		126
+#define DA9150_QIF_E_FG_STATUS_SIZE	DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SYNC			127
+#define DA9150_QIF_SYNC_SIZE		DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_MAX_CODES		128
+
+/* QIF Sync Timeout */
+#define DA9150_QIF_SYNC_TIMEOUT		1000
+#define DA9150_QIF_SYNC_RETRIES		10
+
+/* QIF E_FG_STATUS */
+#define DA9150_FG_IRQ_LOW_SOC_MASK	(1 << 0)
+#define DA9150_FG_IRQ_HIGH_SOC_MASK	(1 << 1)
+#define DA9150_FG_IRQ_SOC_MASK	\
+	(DA9150_FG_IRQ_LOW_SOC_MASK | DA9150_FG_IRQ_HIGH_SOC_MASK)
+
+/* Private data */
+struct da9150_fg {
+	struct da9150 *da9150;
+	struct device *dev;
+
+	struct mutex io_lock;
+
+	struct power_supply *battery;
+	struct delayed_work work;
+	u32 interval;
+
+	int warn_soc;
+	int crit_soc;
+	int soc;
+};
+
+/* Battery Properties */
+static u32 da9150_fg_read_attr(struct da9150_fg *fg, u8 code, u8 size)
+
+{
+	u8 buf[DA9150_QIF_LONG_SIZE];
+	u8 read_addr;
+	u32 res = 0;
+	int i;
+
+	/* Set QIF code (READ mode) */
+	read_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_READ;
+
+	da9150_read_qif(fg->da9150, read_addr, size, buf);
+	for (i = 0; i < size; ++i)
+		res |= (buf[i] << (i * DA9150_QIF_BYTE_SIZE));
+
+	return res;
+}
+
+static void da9150_fg_write_attr(struct da9150_fg *fg, u8 code, u8 size,
+				 u32 val)
+
+{
+	u8 buf[DA9150_QIF_LONG_SIZE];
+	u8 write_addr;
+	int i;
+
+	/* Set QIF code (WRITE mode) */
+	write_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_WRITE;
+
+	for (i = 0; i < size; ++i) {
+		buf[i] = (val >> (i * DA9150_QIF_BYTE_SIZE)) &
+			 DA9150_QIF_BYTE_MASK;
+	}
+	da9150_write_qif(fg->da9150, write_addr, size, buf);
+}
+
+/* Trigger QIF Sync to update QIF readable data */
+static void da9150_fg_read_sync_start(struct da9150_fg *fg)
+{
+	int i = 0;
+	u32 res = 0;
+
+	mutex_lock(&fg->io_lock);
+
+	/* Check if QIF sync already requested, and write to sync if not */
+	res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+				  DA9150_QIF_SYNC_SIZE);
+	if (res > 0)
+		da9150_fg_write_attr(fg, DA9150_QIF_SYNC,
+				     DA9150_QIF_SYNC_SIZE, 0);
+
+	/* Wait for sync to complete */
+	res = 0;
+	while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	/* Check if sync completed */
+	if (res == 0)
+		dev_err(fg->dev, "Failed to perform QIF read sync!\n");
+}
+
+/*
+ * Should always be called after QIF sync read has been performed, and all
+ * attributes required have been accessed.
+ */
+static inline void da9150_fg_read_sync_end(struct da9150_fg *fg)
+{
+	mutex_unlock(&fg->io_lock);
+}
+
+/* Sync read of single QIF attribute */
+static u32 da9150_fg_read_attr_sync(struct da9150_fg *fg, u8 code, u8 size)
+{
+	u32 val;
+
+	da9150_fg_read_sync_start(fg);
+	val = da9150_fg_read_attr(fg, code, size);
+	da9150_fg_read_sync_end(fg);
+
+	return val;
+}
+
+/* Wait for QIF Sync, write QIF data and wait for ack */
+static void da9150_fg_write_attr_sync(struct da9150_fg *fg, u8 code, u8 size,
+				      u32 val)
+{
+	int i = 0;
+	u32 res = 0, sync_val;
+
+	mutex_lock(&fg->io_lock);
+
+	/* Check if QIF sync already requested */
+	res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+				  DA9150_QIF_SYNC_SIZE);
+
+	/* Wait for an existing sync to complete */
+	while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	if (res == 0) {
+		dev_err(fg->dev, "Timeout waiting for existing QIF sync!\n");
+		mutex_unlock(&fg->io_lock);
+		return;
+	}
+
+	/* Write value for QIF code */
+	da9150_fg_write_attr(fg, code, size, val);
+
+	/* Wait for write acknowledgment */
+	i = 0;
+	sync_val = res;
+	while ((res == sync_val) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+		usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+			     DA9150_QIF_SYNC_TIMEOUT * 2);
+		res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+					  DA9150_QIF_SYNC_SIZE);
+	}
+
+	mutex_unlock(&fg->io_lock);
+
+	/* Check write was actually successful */
+	if (res != (sync_val + 1))
+		dev_err(fg->dev, "Error performing QIF sync write for code %d\n",
+			code);
+}
+
+/* Power Supply attributes */
+static int da9150_fg_capacity(struct da9150_fg *fg,
+			      union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+					       DA9150_QIF_SOC_PCT_SIZE);
+
+	if (val->intval > 100)
+		val->intval = 100;
+
+	return 0;
+}
+
+static int da9150_fg_current_avg(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	u32 iavg, sd_gain, shunt_val;
+	u64 div, res;
+
+	da9150_fg_read_sync_start(fg);
+	iavg = da9150_fg_read_attr(fg, DA9150_QIF_IAVG,
+				   DA9150_QIF_IAVG_SIZE);
+	shunt_val = da9150_fg_read_attr(fg, DA9150_QIF_SHUNT_VAL,
+					DA9150_QIF_SHUNT_VAL_SIZE);
+	sd_gain = da9150_fg_read_attr(fg, DA9150_QIF_SD_GAIN,
+				      DA9150_QIF_SD_GAIN_SIZE);
+	da9150_fg_read_sync_end(fg);
+
+	div = (u64) (sd_gain * shunt_val * 65536ULL);
+	do_div(div, 1000000);
+	res = (u64) (iavg * 1000000ULL);
+	do_div(res, div);
+
+	val->intval = (int) res;
+
+	return 0;
+}
+
+static int da9150_fg_voltage_avg(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	u64 res;
+
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_UAVG,
+					       DA9150_QIF_UAVG_SIZE);
+
+	res = (u64) (val->intval * 186ULL);
+	do_div(res, 10000);
+	val->intval = (int) res;
+
+	return 0;
+}
+
+static int da9150_fg_charge_full(struct da9150_fg *fg,
+				 union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_FCC_MAH,
+					       DA9150_QIF_FCC_MAH_SIZE);
+
+	val->intval = val->intval * 1000;
+
+	return 0;
+}
+
+/*
+ * Temperature reading from device is only valid if battery/system provides
+ * valid NTC to associated pin of DA9150 chip.
+ */
+static int da9150_fg_temp(struct da9150_fg *fg,
+			  union power_supply_propval *val)
+{
+	val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_NTCAVG,
+					       DA9150_QIF_NTCAVG_SIZE);
+
+	val->intval = (val->intval * 10) / 1048576;
+
+	return 0;
+}
+
+static enum power_supply_property da9150_fg_props[] = {
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int da9150_fg_get_prop(struct power_supply *psy,
+			      enum power_supply_property psp,
+			      union power_supply_propval *val)
+{
+	struct da9150_fg *fg = dev_get_drvdata(psy->dev.parent);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = da9150_fg_capacity(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = da9150_fg_current_avg(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = da9150_fg_voltage_avg(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = da9150_fg_charge_full(fg, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = da9150_fg_temp(fg, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/* Repeated SOC check */
+static bool da9150_fg_soc_changed(struct da9150_fg *fg)
+{
+	union power_supply_propval val;
+
+	da9150_fg_capacity(fg, &val);
+	if (val.intval != fg->soc) {
+		fg->soc = val.intval;
+		return true;
+	}
+
+	return false;
+}
+
+static void da9150_fg_work(struct work_struct *work)
+{
+	struct da9150_fg *fg = container_of(work, struct da9150_fg, work.work);
+
+	/* Report if SOC has changed */
+	if (da9150_fg_soc_changed(fg))
+		power_supply_changed(fg->battery);
+
+	schedule_delayed_work(&fg->work, msecs_to_jiffies(fg->interval));
+}
+
+/* SOC level event configuration */
+static void da9150_fg_soc_event_config(struct da9150_fg *fg)
+{
+	int soc;
+
+	soc = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+				       DA9150_QIF_SOC_PCT_SIZE);
+
+	if (soc > fg->warn_soc) {
+		/* If SOC > warn level, set discharge warn level event */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+					  DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+					  fg->warn_soc + 1);
+	} else if ((soc <= fg->warn_soc) && (soc > fg->crit_soc)) {
+		/*
+		 * If SOC <= warn level, set discharge crit level event,
+		 * and set charge warn level event.
+		 */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+					  DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+					  fg->crit_soc + 1);
+
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+					  DA9150_QIF_CHARGE_LIMIT_SIZE,
+					  fg->warn_soc);
+	} else if (soc <= fg->crit_soc) {
+		/* If SOC <= crit level, set charge crit level event */
+		da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+					  DA9150_QIF_CHARGE_LIMIT_SIZE,
+					  fg->crit_soc);
+	}
+}
+
+static irqreturn_t da9150_fg_irq(int irq, void *data)
+{
+	struct da9150_fg *fg = data;
+	u32 e_fg_status;
+
+	/* Read FG IRQ status info */
+	e_fg_status = da9150_fg_read_attr(fg, DA9150_QIF_E_FG_STATUS,
+					  DA9150_QIF_E_FG_STATUS_SIZE);
+
+	/* Handle warning/critical threhold events */
+	if (e_fg_status & DA9150_FG_IRQ_SOC_MASK)
+		da9150_fg_soc_event_config(fg);
+
+	/* Clear any FG IRQs */
+	da9150_fg_write_attr(fg, DA9150_QIF_E_FG_STATUS,
+			     DA9150_QIF_E_FG_STATUS_SIZE, e_fg_status);
+
+	return IRQ_HANDLED;
+}
+
+static struct da9150_fg_pdata *da9150_fg_dt_pdata(struct device *dev)
+{
+	struct device_node *fg_node = dev->of_node;
+	struct da9150_fg_pdata *pdata;
+
+	pdata = devm_kzalloc(dev, sizeof(struct da9150_fg_pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	of_property_read_u32(fg_node, "dlg,update-interval",
+			     &pdata->update_interval);
+	of_property_read_u8(fg_node, "dlg,warn-soc-level",
+			    &pdata->warn_soc_lvl);
+	of_property_read_u8(fg_node, "dlg,crit-soc-level",
+			    &pdata->crit_soc_lvl);
+
+	return pdata;
+}
+
+static const struct power_supply_desc fg_desc = {
+	.name		= "da9150-fg",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= da9150_fg_props,
+	.num_properties	= ARRAY_SIZE(da9150_fg_props),
+	.get_property	= da9150_fg_get_prop,
+};
+
+static int da9150_fg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct da9150 *da9150 = dev_get_drvdata(dev->parent);
+	struct da9150_fg_pdata *fg_pdata = dev_get_platdata(dev);
+	struct da9150_fg *fg;
+	int ver, irq, ret = 0;
+
+	fg = devm_kzalloc(dev, sizeof(*fg), GFP_KERNEL);
+	if (fg == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, fg);
+	fg->da9150 = da9150;
+	fg->dev = dev;
+
+	mutex_init(&fg->io_lock);
+
+	/* Enable QIF */
+	da9150_set_bits(da9150, DA9150_CORE2WIRE_CTRL_A, DA9150_FG_QIF_EN_MASK,
+			DA9150_FG_QIF_EN_MASK);
+
+	fg->battery = devm_power_supply_register(dev, &fg_desc, NULL);
+	if (IS_ERR(fg->battery)) {
+		ret = PTR_ERR(fg->battery);
+		return ret;
+	}
+
+	ver = da9150_fg_read_attr(fg, DA9150_QIF_FW_MAIN_VER,
+				  DA9150_QIF_FW_MAIN_VER_SIZE);
+	dev_info(dev, "Version: 0x%x\n", ver);
+
+	/* Handle DT data if provided */
+	if (dev->of_node) {
+		fg_pdata = da9150_fg_dt_pdata(dev);
+		dev->platform_data = fg_pdata;
+	}
+
+	/* Handle any pdata provided */
+	if (fg_pdata) {
+		fg->interval = fg_pdata->update_interval;
+
+		if (fg_pdata->warn_soc_lvl > 100)
+			dev_warn(dev, "Invalid SOC warning level provided, Ignoring");
+		else
+			fg->warn_soc = fg_pdata->warn_soc_lvl;
+
+		if ((fg_pdata->crit_soc_lvl > 100) ||
+		    (fg_pdata->crit_soc_lvl >= fg_pdata->warn_soc_lvl))
+			dev_warn(dev, "Invalid SOC critical level provided, Ignoring");
+		else
+			fg->crit_soc = fg_pdata->crit_soc_lvl;
+
+
+	}
+
+	/* Configure initial SOC level events */
+	da9150_fg_soc_event_config(fg);
+
+	/*
+	 * If an interval period has been provided then setup repeating
+	 * work for reporting data updates.
+	 */
+	if (fg->interval) {
+		ret = devm_delayed_work_autocancel(dev, &fg->work,
+						   da9150_fg_work);
+		if (ret) {
+			dev_err(dev, "Failed to init work\n");
+			return ret;
+		}
+
+		schedule_delayed_work(&fg->work,
+				      msecs_to_jiffies(fg->interval));
+	}
+
+	/* Register IRQ */
+	irq = platform_get_irq_byname(pdev, "FG");
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, da9150_fg_irq,
+					IRQF_ONESHOT, "FG", fg);
+	if (ret) {
+		dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int da9150_fg_resume(struct platform_device *pdev)
+{
+	struct da9150_fg *fg = platform_get_drvdata(pdev);
+
+	/*
+	 * Trigger SOC check to happen now so as to indicate any value change
+	 * since last check before suspend.
+	 */
+	if (fg->interval)
+		flush_delayed_work(&fg->work);
+
+	return 0;
+}
+
+static struct platform_driver da9150_fg_driver = {
+	.driver = {
+		.name = "da9150-fuel-gauge",
+	},
+	.probe = da9150_fg_probe,
+	.resume = da9150_fg_resume,
+};
+
+module_platform_driver(da9150_fg_driver);
+
+MODULE_DESCRIPTION("Fuel-Gauge Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ds2760_battery.c b/drivers/power/supply/ds2760_battery.c
new file mode 100644
index 000000000..5f50da524
--- /dev/null
+++ b/drivers/power/supply/ds2760_battery.c
@@ -0,0 +1,816 @@
+/*
+ * Driver for batteries with DS2760 chips inside.
+ *
+ * Copyright © 2007 Anton Vorontsov
+ *	       2004-2007 Matt Reimer
+ *	       2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author:  Anton Vorontsov <cbou@mail.ru>
+ *	    February 2007
+ *
+ *	    Matt Reimer <mreimer@vpop.net>
+ *	    April 2004, 2005, 2007
+ *
+ *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *	    September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/suspend.h>
+#include <linux/w1.h>
+#include <linux/of.h>
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+static bool pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
+#define W1_FAMILY_DS2760		0x30
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP			0xAA
+#define W1_DS2760_READ_DATA		0x69
+#define W1_DS2760_WRITE_DATA		0x6C
+#define W1_DS2760_COPY_DATA		0x48
+#define W1_DS2760_RECALL_DATA		0xB8
+#define W1_DS2760_LOCK			0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE		0x40
+
+#define DS2760_PROTECTION_REG		0x00
+
+#define DS2760_STATUS_REG		0x01
+#define DS2760_STATUS_IE		(1 << 2)
+#define DS2760_STATUS_SWEN		(1 << 3)
+#define DS2760_STATUS_RNAOP		(1 << 4)
+#define DS2760_STATUS_PMOD		(1 << 5)
+
+#define DS2760_EEPROM_REG		0x07
+#define DS2760_SPECIAL_FEATURE_REG	0x08
+#define DS2760_VOLTAGE_MSB		0x0c
+#define DS2760_VOLTAGE_LSB		0x0d
+#define DS2760_CURRENT_MSB		0x0e
+#define DS2760_CURRENT_LSB		0x0f
+#define DS2760_CURRENT_ACCUM_MSB	0x10
+#define DS2760_CURRENT_ACCUM_LSB	0x11
+#define DS2760_TEMP_MSB			0x18
+#define DS2760_TEMP_LSB			0x19
+#define DS2760_EEPROM_BLOCK0		0x20
+#define DS2760_ACTIVE_FULL		0x20
+#define DS2760_EEPROM_BLOCK1		0x30
+#define DS2760_STATUS_WRITE_REG		0x31
+#define DS2760_RATED_CAPACITY		0x32
+#define DS2760_CURRENT_OFFSET_BIAS	0x33
+#define DS2760_ACTIVE_EMPTY		0x3b
+
+struct ds2760_device_info {
+	struct device *dev;
+
+	/* DS2760 data, valid after calling ds2760_battery_read_status() */
+	unsigned long update_time;	/* jiffies when data read */
+	char raw[DS2760_DATA_SIZE];	/* raw DS2760 data */
+	int voltage_raw;		/* units of 4.88 mV */
+	int voltage_uV;			/* units of µV */
+	int current_raw;		/* units of 0.625 mA */
+	int current_uA;			/* units of µA */
+	int accum_current_raw;		/* units of 0.25 mAh */
+	int accum_current_uAh;		/* units of µAh */
+	int temp_raw;			/* units of 0.125 °C */
+	int temp_C;			/* units of 0.1 °C */
+	int rated_capacity;		/* units of µAh */
+	int rem_capacity;		/* percentage */
+	int full_active_uAh;		/* units of µAh */
+	int empty_uAh;			/* units of µAh */
+	int life_sec;			/* units of seconds */
+	int charge_status;		/* POWER_SUPPLY_STATUS_* */
+
+	int full_counter;
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct workqueue_struct *monitor_wqueue;
+	struct delayed_work monitor_work;
+	struct delayed_work set_charged_work;
+	struct notifier_block pm_notifier;
+};
+
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+			int io)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+	if (!dev)
+		return 0;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (addr > DS2760_DATA_SIZE || addr < 0) {
+		count = 0;
+		goto out;
+	}
+	if (addr + count > DS2760_DATA_SIZE)
+		count = DS2760_DATA_SIZE - addr;
+
+	if (!w1_reset_select_slave(sl)) {
+		if (!io) {
+			w1_write_8(sl->master, W1_DS2760_READ_DATA);
+			w1_write_8(sl->master, addr);
+			count = w1_read_block(sl->master, buf, count);
+		} else {
+			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+			w1_write_8(sl->master, addr);
+			w1_write_block(sl->master, buf, count);
+			/* XXX w1_write_block returns void, not n_written */
+		}
+	}
+
+out:
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return count;
+}
+
+static int w1_ds2760_read(struct device *dev,
+			  char *buf, int addr,
+			  size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+static int w1_ds2760_write(struct device *dev,
+			   char *buf,
+			   int addr, size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 1);
+}
+
+static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_reset_select_slave(sl) == 0) {
+		w1_write_8(sl->master, cmd);
+		w1_write_8(sl->master, addr);
+	}
+
+	mutex_unlock(&sl->master->bus_mutex);
+	return 0;
+}
+
+static int w1_ds2760_store_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
+}
+
+static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
+}
+
+static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr, char *buf,
+			     loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	return w1_ds2760_read(dev, buf, off, count);
+}
+
+static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
+
+static struct bin_attribute *w1_ds2760_bin_attrs[] = {
+	&bin_attr_w1_slave,
+	NULL,
+};
+
+static const struct attribute_group w1_ds2760_group = {
+	.bin_attrs = w1_ds2760_bin_attrs,
+};
+
+static const struct attribute_group *w1_ds2760_groups[] = {
+	&w1_ds2760_group,
+	NULL,
+};
+/* Some batteries have their rated capacity stored a N * 10 mAh, while
+ * others use an index into this table. */
+static int rated_capacities[] = {
+	0,
+	920,	/* Samsung */
+	920,	/* BYD */
+	920,	/* Lishen */
+	920,	/* NEC */
+	1440,	/* Samsung */
+	1440,	/* BYD */
+#ifdef CONFIG_MACH_H4700
+	1800,	/* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */
+#else
+	1440,	/* Lishen */
+#endif
+	1440,	/* NEC */
+	2880,	/* Samsung */
+	2880,	/* BYD */
+	2880,	/* Lishen */
+	2880,	/* NEC */
+#ifdef CONFIG_MACH_H4700
+	0,
+	3600,	/* HP iPAQ hx4700 3.7V 3600mAh (359114-001) */
+#endif
+};
+
+/* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C
+ * temp is in Celsius */
+static int battery_interpolate(int array[], int temp)
+{
+	int index, dt;
+
+	if (temp <= 0)
+		return array[0];
+	if (temp >= 40)
+		return array[4];
+
+	index = temp / 10;
+	dt    = temp % 10;
+
+	return array[index] + (((array[index + 1] - array[index]) * dt) / 10);
+}
+
+static int ds2760_battery_read_status(struct ds2760_device_info *di)
+{
+	int ret, i, start, count, scale[5];
+
+	if (di->update_time && time_before(jiffies, di->update_time +
+					   msecs_to_jiffies(cache_time)))
+		return 0;
+
+	/* The first time we read the entire contents of SRAM/EEPROM,
+	 * but after that we just read the interesting bits that change. */
+	if (di->update_time == 0) {
+		start = 0;
+		count = DS2760_DATA_SIZE;
+	} else {
+		start = DS2760_VOLTAGE_MSB;
+		count = DS2760_TEMP_LSB - start + 1;
+	}
+
+	ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
+	if (ret != count) {
+		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
+			 di->dev);
+		return 1;
+	}
+
+	di->update_time = jiffies;
+
+	/* DS2760 reports voltage in units of 4.88mV, but the battery class
+	 * reports in units of uV, so convert by multiplying by 4880. */
+	di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) |
+			  (di->raw[DS2760_VOLTAGE_LSB] >> 5);
+	di->voltage_uV = di->voltage_raw * 4880;
+
+	/* DS2760 reports current in signed units of 0.625mA, but the battery
+	 * class reports in units of µA, so convert by multiplying by 625. */
+	di->current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) |
+			  (di->raw[DS2760_CURRENT_LSB] >> 3);
+	di->current_uA = di->current_raw * 625;
+
+	/* DS2760 reports accumulated current in signed units of 0.25mAh. */
+	di->accum_current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) |
+			   di->raw[DS2760_CURRENT_ACCUM_LSB];
+	di->accum_current_uAh = di->accum_current_raw * 250;
+
+	/* DS2760 reports temperature in signed units of 0.125°C, but the
+	 * battery class reports in units of 1/10 °C, so we convert by
+	 * multiplying by .125 * 10 = 1.25. */
+	di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) |
+				     (di->raw[DS2760_TEMP_LSB] >> 5);
+	di->temp_C = di->temp_raw + (di->temp_raw / 4);
+
+	/* At least some battery monitors (e.g. HP iPAQ) store the battery's
+	 * maximum rated capacity. */
+	if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities))
+		di->rated_capacity = rated_capacities[
+			(unsigned int)di->raw[DS2760_RATED_CAPACITY]];
+	else
+		di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10;
+
+	di->rated_capacity *= 1000; /* convert to µAh */
+
+	/* Calculate the full level at the present temperature. */
+	di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
+			      di->raw[DS2760_ACTIVE_FULL + 1];
+
+	/* If the full_active_uAh value is not given, fall back to the rated
+	 * capacity. This is likely to happen when chips are not part of the
+	 * battery pack and is therefore not bootstrapped. */
+	if (di->full_active_uAh == 0)
+		di->full_active_uAh = di->rated_capacity / 1000L;
+
+	scale[0] = di->full_active_uAh;
+	for (i = 1; i < 5; i++)
+		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i];
+
+	di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->full_active_uAh *= 1000; /* convert to µAh */
+
+	/* Calculate the empty level at the present temperature. */
+	scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4];
+	for (i = 3; i >= 0; i--)
+		scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i];
+
+	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->empty_uAh *= 1000; /* convert to µAh */
+
+	if (di->full_active_uAh == di->empty_uAh)
+		di->rem_capacity = 0;
+	else
+		/* From Maxim Application Note 131: remaining capacity =
+		 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+		di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+				    (di->full_active_uAh - di->empty_uAh);
+
+	if (di->rem_capacity < 0)
+		di->rem_capacity = 0;
+	if (di->rem_capacity > 100)
+		di->rem_capacity = 100;
+
+	if (di->current_uA < -100L)
+		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
+					/ (di->current_uA / 100L);
+	else
+		di->life_sec = 0;
+
+	return 0;
+}
+
+static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
+					     unsigned int acr_val)
+{
+	unsigned char acr[2];
+
+	/* acr is in units of 0.25 mAh */
+	acr_val *= 4L;
+	acr_val /= 1000;
+
+	acr[0] = acr_val >> 8;
+	acr[1] = acr_val & 0xff;
+
+	if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+		dev_warn(di->dev, "ACR write failed\n");
+}
+
+static void ds2760_battery_update_status(struct ds2760_device_info *di)
+{
+	int old_charge_status = di->charge_status;
+
+	ds2760_battery_read_status(di);
+
+	if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN)
+		di->full_counter = 0;
+
+	if (power_supply_am_i_supplied(di->bat)) {
+		if (di->current_uA > 10000) {
+			di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			di->full_counter = 0;
+		} else if (di->current_uA < -5000) {
+			if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING)
+				dev_notice(di->dev, "not enough power to "
+					   "charge\n");
+			di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			di->full_counter = 0;
+		} else if (di->current_uA < 10000 &&
+			    di->charge_status != POWER_SUPPLY_STATUS_FULL) {
+
+			/* Don't consider the battery to be full unless
+			 * we've seen the current < 10 mA at least two
+			 * consecutive times. */
+
+			di->full_counter++;
+
+			if (di->full_counter < 2) {
+				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			} else {
+				di->charge_status = POWER_SUPPLY_STATUS_FULL;
+				ds2760_battery_set_current_accum(di,
+						di->full_active_uAh);
+			}
+		}
+	} else {
+		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+		di->full_counter = 0;
+	}
+
+	if (di->charge_status != old_charge_status)
+		power_supply_changed(di->bat);
+}
+
+static void ds2760_battery_write_status(struct ds2760_device_info *di,
+					char status)
+{
+	if (status == di->raw[DS2760_STATUS_REG])
+		return;
+
+	w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+}
+
+static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
+						unsigned char rated_capacity)
+{
+	if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
+		return;
+
+	w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+}
+
+static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
+					     int active_full)
+{
+	unsigned char tmp[2] = {
+		active_full >> 8,
+		active_full & 0xff
+	};
+
+	if (tmp[0] == di->raw[DS2760_ACTIVE_FULL] &&
+	    tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
+		return;
+
+	w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+
+	/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
+	 * values won't be read back by ds2760_battery_read_status() */
+	di->raw[DS2760_ACTIVE_FULL] = tmp[0];
+	di->raw[DS2760_ACTIVE_FULL + 1] = tmp[1];
+}
+
+static void ds2760_battery_work(struct work_struct *work)
+{
+	struct ds2760_device_info *di = container_of(work,
+		struct ds2760_device_info, monitor_work.work);
+	const int interval = HZ * 60;
+
+	dev_dbg(di->dev, "%s\n", __func__);
+
+	ds2760_battery_update_status(di);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval);
+}
+
+static void ds2760_battery_external_power_changed(struct power_supply *psy)
+{
+	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+	dev_dbg(di->dev, "%s\n", __func__);
+
+	mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
+}
+
+
+static void ds2760_battery_set_charged_work(struct work_struct *work)
+{
+	char bias;
+	struct ds2760_device_info *di = container_of(work,
+		struct ds2760_device_info, set_charged_work.work);
+
+	dev_dbg(di->dev, "%s\n", __func__);
+
+	ds2760_battery_read_status(di);
+
+	/* When we get notified by external circuitry that the battery is
+	 * considered fully charged now, we know that there is no current
+	 * flow any more. However, the ds2760's internal current meter is
+	 * too inaccurate to rely on - spec say something ~15% failure.
+	 * Hence, we use the current offset bias register to compensate
+	 * that error.
+	 */
+
+	if (!power_supply_am_i_supplied(di->bat))
+		return;
+
+	bias = (signed char) di->current_raw +
+		(signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
+
+	dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
+
+	w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+
+	/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
+	 * value won't be read back by ds2760_battery_read_status() */
+	di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
+}
+
+static void ds2760_battery_set_charged(struct power_supply *psy)
+{
+	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+	/* postpone the actual work by 20 secs. This is for debouncing GPIO
+	 * signals and to let the current value settle. See AN4188. */
+	mod_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
+}
+
+static int ds2760_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = di->charge_status;
+		return 0;
+	default:
+		break;
+	}
+
+	ds2760_battery_read_status(di);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = di->voltage_uV;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = di->current_uA;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = di->rated_capacity;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = di->full_active_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		val->intval = di->empty_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = di->accum_current_uAh;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = di->temp_C;
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		val->intval = di->life_sec;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = di->rem_capacity;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ds2760_battery_set_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		/* the interface counts in uAh, convert the value */
+		ds2760_battery_write_active_full(di, val->intval / 1000L);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		/* ds2760_battery_set_current_accum() does the conversion */
+		ds2760_battery_set_current_accum(di, val->intval);
+		break;
+
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int ds2760_battery_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return 1;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property ds2760_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int ds2760_pm_notifier(struct notifier_block *notifier,
+			      unsigned long pm_event,
+			      void *unused)
+{
+	struct ds2760_device_info *di =
+		container_of(notifier, struct ds2760_device_info, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		power_supply_changed(di->bat);
+		mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+		break;
+
+	case PM_RESTORE_PREPARE:
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
+{
+	struct power_supply_config psy_cfg = {};
+	struct ds2760_device_info *di;
+	struct device *dev = &sl->dev;
+	int retval = 0;
+	char name[32];
+	char status;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		retval = -ENOMEM;
+		goto di_alloc_failed;
+	}
+
+	snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
+
+	di->dev				= dev;
+	di->bat_desc.name		= name;
+	di->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
+	di->bat_desc.properties		= ds2760_battery_props;
+	di->bat_desc.num_properties	= ARRAY_SIZE(ds2760_battery_props);
+	di->bat_desc.get_property	= ds2760_battery_get_property;
+	di->bat_desc.set_property	= ds2760_battery_set_property;
+	di->bat_desc.property_is_writeable =
+				  ds2760_battery_property_is_writeable;
+	di->bat_desc.set_charged	= ds2760_battery_set_charged;
+	di->bat_desc.external_power_changed =
+				  ds2760_battery_external_power_changed;
+
+	psy_cfg.drv_data = di;
+
+	if (dev->of_node) {
+		u32 tmp;
+
+		psy_cfg.of_node = dev->of_node;
+
+		if (!of_property_read_bool(dev->of_node, "maxim,pmod-enabled"))
+			pmod_enabled = true;
+
+		if (!of_property_read_u32(dev->of_node,
+					  "maxim,cache-time-ms", &tmp))
+			cache_time = tmp;
+
+		if (!of_property_read_u32(dev->of_node,
+					  "rated-capacity-microamp-hours",
+					  &tmp))
+			rated_capacity = tmp / 10; /* property is in mAh */
+	}
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	sl->family_data = di;
+
+	/* enable sleep mode feature */
+	ds2760_battery_read_status(di);
+	status = di->raw[DS2760_STATUS_REG];
+	if (pmod_enabled)
+		status |= DS2760_STATUS_PMOD;
+	else
+		status &= ~DS2760_STATUS_PMOD;
+
+	ds2760_battery_write_status(di, status);
+
+	/* set rated capacity from module param or device tree */
+	if (rated_capacity)
+		ds2760_battery_write_rated_capacity(di, rated_capacity);
+
+	/* set current accumulator if given as parameter.
+	 * this should only be done for bootstrapping the value */
+	if (current_accum)
+		ds2760_battery_set_current_accum(di, current_accum);
+
+	di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
+	if (IS_ERR(di->bat)) {
+		dev_err(di->dev, "failed to register battery\n");
+		retval = PTR_ERR(di->bat);
+		goto batt_failed;
+	}
+
+	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+	INIT_DELAYED_WORK(&di->set_charged_work,
+			  ds2760_battery_set_charged_work);
+	di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
+	if (!di->monitor_wqueue) {
+		retval = -ESRCH;
+		goto workqueue_failed;
+	}
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
+
+	di->pm_notifier.notifier_call = ds2760_pm_notifier;
+	register_pm_notifier(&di->pm_notifier);
+
+	goto success;
+
+workqueue_failed:
+	power_supply_unregister(di->bat);
+batt_failed:
+di_alloc_failed:
+success:
+	return retval;
+}
+
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
+{
+	struct ds2760_device_info *di = sl->family_data;
+
+	unregister_pm_notifier(&di->pm_notifier);
+	cancel_delayed_work_sync(&di->monitor_work);
+	cancel_delayed_work_sync(&di->set_charged_work);
+	destroy_workqueue(di->monitor_wqueue);
+	power_supply_unregister(di->bat);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id w1_ds2760_of_ids[] = {
+	{ .compatible = "maxim,ds2760" },
+	{}
+};
+#endif
+
+static const struct w1_family_ops w1_ds2760_fops = {
+	.add_slave	= w1_ds2760_add_slave,
+	.remove_slave	= w1_ds2760_remove_slave,
+	.groups		= w1_ds2760_groups,
+};
+
+static struct w1_family w1_ds2760_family = {
+	.fid		= W1_FAMILY_DS2760,
+	.fops		= &w1_ds2760_fops,
+	.of_match_table	= of_match_ptr(w1_ds2760_of_ids),
+};
+module_w1_family(w1_ds2760_family);
+
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
+	      "Matt Reimer <mreimer@vpop.net>, "
+	      "Anton Vorontsov <cbou@mail.ru>");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
diff --git a/drivers/power/supply/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c
new file mode 100644
index 000000000..2b8c90d84
--- /dev/null
+++ b/drivers/power/supply/ds2780_battery.c
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@indesign-llc.com>
+ *
+ * Based on ds2760_battery and ds2782_battery drivers
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include <linux/w1.h>
+#include "../../w1/slaves/w1_ds2780.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2780_CURRENT_UNITS	1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2780_CHARGE_UNITS		6250
+/* Number of bytes in user EEPROM space */
+#define DS2780_USER_EEPROM_SIZE		(DS2780_EEPROM_BLOCK0_END - \
+					DS2780_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2780_PARAM_EEPROM_SIZE	(DS2780_EEPROM_BLOCK1_END - \
+					DS2780_EEPROM_BLOCK1_START + 1)
+
+struct ds2780_device_info {
+	struct device *dev;
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct device *w1_dev;
+};
+
+enum current_types {
+	CURRENT_NOW,
+	CURRENT_AVG,
+};
+
+static const char model[] = "DS2780";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2780_device_info *
+to_ds2780_device_info(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
+	char *buf, int addr, size_t count, int io)
+{
+	return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
+	int addr)
+{
+	return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val,
+	int addr)
+{
+	int ret;
+	u8 raw[2];
+
+	ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+	if (ret < 0)
+		return ret;
+
+	*val = (raw[0] << 8) | raw[1];
+
+	return 0;
+}
+
+static inline int ds2780_read_block(struct ds2780_device_info *dev_info,
+	u8 *val, int addr, size_t count)
+{
+	return ds2780_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val,
+	int addr, size_t count)
+{
+	return ds2780_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2780_store_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA);
+}
+
+static inline int ds2780_recall_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA);
+}
+
+static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg)
+{
+	int ret;
+
+	ret = ds2780_store_eeprom(dev_info->w1_dev, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2780_recall_eeprom(dev_info->w1_dev, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2780_set_sense_register(struct ds2780_device_info *dev_info,
+	u8 conductance)
+{
+	int ret;
+
+	ret = ds2780_write(dev_info, &conductance,
+				DS2780_RSNSP_REG, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
+	u16 *rsgain)
+{
+	return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info,
+	u16 rsgain)
+{
+	int ret;
+	u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+	ret = ds2780_write(dev_info, raw,
+				DS2780_RSGAIN_MSB_REG, sizeof(raw));
+	if (ret < 0)
+		return ret;
+
+	return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG);
+}
+
+static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
+	int *voltage_uV)
+{
+	int ret;
+	s16 voltage_raw;
+
+	/*
+	 * The voltage value is located in 10 bits across the voltage MSB
+	 * and LSB registers in two's complement form
+	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+	 * voltage MSB register
+	 * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+	 * voltage LSB register
+	 */
+	ret = ds2780_read16(dev_info, &voltage_raw,
+				DS2780_VOLT_MSB_REG);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * DS2780 reports voltage in units of 4.88mV, but the battery class
+	 * reports in units of uV, so convert by multiplying by 4880.
+	 */
+	*voltage_uV = (voltage_raw / 32) * 4880;
+	return 0;
+}
+
+static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
+	int *temperature)
+{
+	int ret;
+	s16 temperature_raw;
+
+	/*
+	 * The temperature value is located in 10 bits across the temperature
+	 * MSB and LSB registers in two's complement form
+	 * Sign bit of the temperature value is in bit 7 of the temperature
+	 * MSB register
+	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+	 * temperature MSB register
+	 * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+	 * temperature LSB register
+	 */
+	ret = ds2780_read16(dev_info, &temperature_raw,
+				DS2780_TEMP_MSB_REG);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Temperature is measured in units of 0.125 degrees celcius, the
+	 * power_supply class measures temperature in tenths of degrees
+	 * celsius. The temperature value is stored as a 10 bit number, plus
+	 * sign in the upper bits of a 16 bit register.
+	 */
+	*temperature = ((temperature_raw / 32) * 125) / 100;
+	return 0;
+}
+
+static int ds2780_get_current(struct ds2780_device_info *dev_info,
+	enum current_types type, int *current_uA)
+{
+	int ret, sense_res;
+	s16 current_raw;
+	u8 sense_res_raw, reg_msb;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
+	if (ret < 0)
+		return ret;
+
+	if (sense_res_raw == 0) {
+		dev_err(dev_info->dev, "sense resistor value is 0\n");
+		return -EINVAL;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	if (type == CURRENT_NOW)
+		reg_msb = DS2780_CURRENT_MSB_REG;
+	else if (type == CURRENT_AVG)
+		reg_msb = DS2780_IAVG_MSB_REG;
+	else
+		return -EINVAL;
+
+	/*
+	 * The current value is located in 16 bits across the current MSB
+	 * and LSB registers in two's complement form
+	 * Sign bit of the current value is in bit 7 of the current MSB register
+	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+	 * MSB register
+	 * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+	 * LSB register
+	 */
+	ret = ds2780_read16(dev_info, &current_raw, reg_msb);
+	if (ret < 0)
+		return ret;
+
+	*current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info,
+	int *accumulated_current)
+{
+	int ret, sense_res;
+	s16 current_raw;
+	u8 sense_res_raw;
+
+	/*
+	 * The units of measurement for accumulated current are dependent on
+	 * the value of the sense resistor.
+	 */
+	ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
+	if (ret < 0)
+		return ret;
+
+	if (sense_res_raw == 0) {
+		dev_err(dev_info->dev, "sense resistor value is 0\n");
+		return -ENXIO;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	/*
+	 * The ACR value is located in 16 bits across the ACR MSB and
+	 * LSB registers
+	 * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+	 * MSB register
+	 * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+	 * LSB register
+	 */
+	ret = ds2780_read16(dev_info, &current_raw, DS2780_ACR_MSB_REG);
+	if (ret < 0)
+		return ret;
+
+	*accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2780_get_capacity(struct ds2780_device_info *dev_info,
+	int *capacity)
+{
+	int ret;
+	u8 raw;
+
+	ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG);
+	if (ret < 0)
+		return ret;
+
+	*capacity = raw;
+	return raw;
+}
+
+static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status)
+{
+	int ret, current_uA, capacity;
+
+	ret = ds2780_get_current(dev_info, CURRENT_NOW, &current_uA);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2780_get_capacity(dev_info, &capacity);
+	if (ret < 0)
+		return ret;
+
+	if (capacity == 100)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else if (current_uA == 0)
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (current_uA < 0)
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
+static int ds2780_get_charge_now(struct ds2780_device_info *dev_info,
+	int *charge_now)
+{
+	int ret;
+	u16 charge_raw;
+
+	/*
+	 * The RAAC value is located in 16 bits across the RAAC MSB and
+	 * LSB registers
+	 * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+	 * MSB register
+	 * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+	 * LSB register
+	 */
+	ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG);
+	if (ret < 0)
+		return ret;
+
+	*charge_now = charge_raw * 1600;
+	return 0;
+}
+
+static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
+	u8 *control_reg)
+{
+	return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG);
+}
+
+static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
+	u8 control_reg)
+{
+	int ret;
+
+	ret = ds2780_write(dev_info, &control_reg,
+				DS2780_CONTROL_REG, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG);
+}
+
+static int ds2780_battery_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret = 0;
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ds2780_get_voltage(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds2780_get_temperature(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = model;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = manufacturer;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds2780_get_status(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = ds2780_get_capacity(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = ds2780_get_accumulated_current(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = ds2780_get_charge_now(dev_info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property ds2780_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2780_get_pmod_enabled(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 control_reg;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	/* Get power mode */
+	ret = ds2780_get_control_register(dev_info, &control_reg);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n",
+		 !!(control_reg & DS2780_CONTROL_REG_PMOD));
+}
+
+static ssize_t ds2780_set_pmod_enabled(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 control_reg, new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	/* Set power mode */
+	ret = ds2780_get_control_register(dev_info, &control_reg);
+	if (ret < 0)
+		return ret;
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	if ((new_setting != 0) && (new_setting != 1)) {
+		dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+		return -EINVAL;
+	}
+
+	if (new_setting)
+		control_reg |= DS2780_CONTROL_REG_PMOD;
+	else
+		control_reg &= ~DS2780_CONTROL_REG_PMOD;
+
+	ret = ds2780_set_control_register(dev_info, control_reg);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2780_get_sense_resistor_value(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 sense_resistor;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG);
+	if (ret < 0)
+		return ret;
+
+	ret = sprintf(buf, "%d\n", sense_resistor);
+	return ret;
+}
+
+static ssize_t ds2780_set_sense_resistor_value(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2780_set_sense_register(dev_info, new_setting);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2780_get_rsgain_setting(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u16 rsgain;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = ds2780_get_rsgain_register(dev_info, &rsgain);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2780_set_rsgain_setting(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u16 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = kstrtou16(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	/* Gain can only be from 0 to 1.999 in steps of .001 */
+	if (new_setting > 1999) {
+		dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+		return -EINVAL;
+	}
+
+	ret = ds2780_set_rsgain_register(dev_info, new_setting);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2780_get_pio_pin(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 sfr;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG);
+	if (ret < 0)
+		return ret;
+
+	ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC);
+	return ret;
+}
+
+static ssize_t ds2780_set_pio_pin(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	if ((new_setting != 0) && (new_setting != 1)) {
+		dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+		return -EINVAL;
+	}
+
+	ret = ds2780_write(dev_info, &new_setting,
+				DS2780_SFR_REG, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	return ds2780_read_block(dev_info, buf,
+				DS2780_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+	int ret;
+
+	ret = ds2780_write(dev_info, buf,
+				DS2780_EEPROM_BLOCK1_START + off, count);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+	.attr = {
+		.name = "param_eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS2780_PARAM_EEPROM_SIZE,
+	.read = ds2780_read_param_eeprom_bin,
+	.write = ds2780_write_param_eeprom_bin,
+};
+
+static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+	return ds2780_read_block(dev_info, buf,
+				DS2780_EEPROM_BLOCK0_START + off, count);
+}
+
+static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+	int ret;
+
+	ret = ds2780_write(dev_info, buf,
+				DS2780_EEPROM_BLOCK0_START + off, count);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+	.attr = {
+		.name = "user_eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS2780_USER_EEPROM_SIZE,
+	.read = ds2780_read_user_eeprom_bin,
+	.write = ds2780_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled,
+	ds2780_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+	ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting,
+	ds2780_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin,
+	ds2780_set_pio_pin);
+
+static struct attribute *ds2780_sysfs_attrs[] = {
+	&dev_attr_pmod_enabled.attr,
+	&dev_attr_sense_resistor_value.attr,
+	&dev_attr_rsgain_setting.attr,
+	&dev_attr_pio_pin.attr,
+	NULL
+};
+
+static struct bin_attribute *ds2780_sysfs_bin_attrs[] = {
+	&ds2780_param_eeprom_bin_attr,
+	&ds2780_user_eeprom_bin_attr,
+	NULL
+};
+
+static const struct attribute_group ds2780_sysfs_group = {
+	.attrs = ds2780_sysfs_attrs,
+	.bin_attrs = ds2780_sysfs_bin_attrs,
+};
+
+static const struct attribute_group *ds2780_sysfs_groups[] = {
+	&ds2780_sysfs_group,
+	NULL,
+};
+
+static int ds2780_battery_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct ds2780_device_info *dev_info;
+
+	dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev_info);
+
+	dev_info->dev			= &pdev->dev;
+	dev_info->w1_dev		= pdev->dev.parent;
+	dev_info->bat_desc.name		= dev_name(&pdev->dev);
+	dev_info->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
+	dev_info->bat_desc.properties	= ds2780_battery_props;
+	dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2780_battery_props);
+	dev_info->bat_desc.get_property	= ds2780_battery_get_property;
+
+	psy_cfg.drv_data		= dev_info;
+	psy_cfg.attr_grp		= ds2780_sysfs_groups;
+
+	dev_info->bat = devm_power_supply_register(&pdev->dev,
+						   &dev_info->bat_desc,
+						   &psy_cfg);
+	if (IS_ERR(dev_info->bat)) {
+		dev_err(dev_info->dev, "failed to register battery\n");
+		return PTR_ERR(dev_info->bat);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ds2780_battery_driver = {
+	.driver = {
+		.name = "ds2780-battery",
+	},
+	.probe	  = ds2780_battery_probe,
+};
+
+module_platform_driver(ds2780_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC driver");
+MODULE_ALIAS("platform:ds2780-battery");
diff --git a/drivers/power/supply/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c
new file mode 100644
index 000000000..05b859bf2
--- /dev/null
+++ b/drivers/power/supply/ds2781_battery.c
@@ -0,0 +1,794 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on ds2780_battery drivers
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include <linux/w1.h>
+#include "../../w1/slaves/w1_ds2781.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2781_CURRENT_UNITS	1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2781_CHARGE_UNITS		6250
+/* Number of bytes in user EEPROM space */
+#define DS2781_USER_EEPROM_SIZE		(DS2781_EEPROM_BLOCK0_END - \
+					DS2781_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2781_PARAM_EEPROM_SIZE	(DS2781_EEPROM_BLOCK1_END - \
+					DS2781_EEPROM_BLOCK1_START + 1)
+
+struct ds2781_device_info {
+	struct device *dev;
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct device *w1_dev;
+};
+
+enum current_types {
+	CURRENT_NOW,
+	CURRENT_AVG,
+};
+
+static const char model[] = "DS2781";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2781_device_info *
+to_ds2781_device_info(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
+	char *buf, int addr, size_t count, int io)
+{
+	return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+static int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
+		int addr, size_t count)
+{
+	return ds2781_battery_io(dev_info, buf, addr, count, 0);
+}
+
+static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val,
+	int addr)
+{
+	return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val,
+	int addr)
+{
+	int ret;
+	u8 raw[2];
+
+	ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+	if (ret < 0)
+		return ret;
+
+	*val = (raw[0] << 8) | raw[1];
+
+	return 0;
+}
+
+static inline int ds2781_read_block(struct ds2781_device_info *dev_info,
+	u8 *val, int addr, size_t count)
+{
+	return ds2781_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val,
+	int addr, size_t count)
+{
+	return ds2781_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2781_store_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA);
+}
+
+static inline int ds2781_recall_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA);
+}
+
+static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg)
+{
+	int ret;
+
+	ret = ds2781_store_eeprom(dev_info->w1_dev, reg);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2781_recall_eeprom(dev_info->w1_dev, reg);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2781_set_sense_register(struct ds2781_device_info *dev_info,
+	u8 conductance)
+{
+	int ret;
+
+	ret = ds2781_write(dev_info, &conductance,
+				DS2781_RSNSP, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return ds2781_save_eeprom(dev_info, DS2781_RSNSP);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info,
+	u16 *rsgain)
+{
+	return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info,
+	u16 rsgain)
+{
+	int ret;
+	u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+	ret = ds2781_write(dev_info, raw,
+				DS2781_RSGAIN_MSB, sizeof(raw));
+	if (ret < 0)
+		return ret;
+
+	return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB);
+}
+
+static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
+	int *voltage_uV)
+{
+	int ret;
+	char val[2];
+	int voltage_raw;
+
+	ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
+	if (ret < 0)
+		return ret;
+	/*
+	 * The voltage value is located in 10 bits across the voltage MSB
+	 * and LSB registers in two's complement form
+	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+	 * voltage MSB register
+	 * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+	 * voltage LSB register
+	 */
+	voltage_raw = (val[0] << 3) |
+		(val[1] >> 5);
+
+	/* DS2781 reports voltage in units of 9.76mV, but the battery class
+	 * reports in units of uV, so convert by multiplying by 9760. */
+	*voltage_uV = voltage_raw * 9760;
+
+	return 0;
+}
+
+static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
+	int *temp)
+{
+	int ret;
+	char val[2];
+	int temp_raw;
+
+	ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
+	if (ret < 0)
+		return ret;
+	/*
+	 * The temperature value is located in 10 bits across the temperature
+	 * MSB and LSB registers in two's complement form
+	 * Sign bit of the temperature value is in bit 7 of the temperature
+	 * MSB register
+	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+	 * temperature MSB register
+	 * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+	 * temperature LSB register
+	 */
+	temp_raw = ((val[0]) << 3) |
+		(val[1] >> 5);
+	*temp = temp_raw + (temp_raw / 4);
+
+	return 0;
+}
+
+static int ds2781_get_current(struct ds2781_device_info *dev_info,
+	enum current_types type, int *current_uA)
+{
+	int ret, sense_res;
+	s16 current_raw;
+	u8 sense_res_raw, reg_msb;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+	if (ret < 0)
+		return ret;
+
+	if (sense_res_raw == 0) {
+		dev_err(dev_info->dev, "sense resistor value is 0\n");
+		return -EINVAL;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	if (type == CURRENT_NOW)
+		reg_msb = DS2781_CURRENT_MSB;
+	else if (type == CURRENT_AVG)
+		reg_msb = DS2781_IAVG_MSB;
+	else
+		return -EINVAL;
+
+	/*
+	 * The current value is located in 16 bits across the current MSB
+	 * and LSB registers in two's complement form
+	 * Sign bit of the current value is in bit 7 of the current MSB register
+	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+	 * MSB register
+	 * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+	 * LSB register
+	 */
+	ret = ds2781_read16(dev_info, &current_raw, reg_msb);
+	if (ret < 0)
+		return ret;
+
+	*current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info,
+	int *accumulated_current)
+{
+	int ret, sense_res;
+	s16 current_raw;
+	u8 sense_res_raw;
+
+	/*
+	 * The units of measurement for accumulated current are dependent on
+	 * the value of the sense resistor.
+	 */
+	ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+	if (ret < 0)
+		return ret;
+
+	if (sense_res_raw == 0) {
+		dev_err(dev_info->dev, "sense resistor value is 0\n");
+		return -EINVAL;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	/*
+	 * The ACR value is located in 16 bits across the ACR MSB and
+	 * LSB registers
+	 * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+	 * MSB register
+	 * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+	 * LSB register
+	 */
+	ret = ds2781_read16(dev_info, &current_raw, DS2781_ACR_MSB);
+	if (ret < 0)
+		return ret;
+
+	*accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2781_get_capacity(struct ds2781_device_info *dev_info,
+	int *capacity)
+{
+	int ret;
+	u8 raw;
+
+	ret = ds2781_read8(dev_info, &raw, DS2781_RARC);
+	if (ret < 0)
+		return ret;
+
+	*capacity = raw;
+	return 0;
+}
+
+static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status)
+{
+	int ret, current_uA, capacity;
+
+	ret = ds2781_get_current(dev_info, CURRENT_NOW, &current_uA);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2781_get_capacity(dev_info, &capacity);
+	if (ret < 0)
+		return ret;
+
+	if (power_supply_am_i_supplied(dev_info->bat)) {
+		if (capacity == 100)
+			*status = POWER_SUPPLY_STATUS_FULL;
+		else if (current_uA > 50000)
+			*status = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+	return 0;
+}
+
+static int ds2781_get_charge_now(struct ds2781_device_info *dev_info,
+	int *charge_now)
+{
+	int ret;
+	u16 charge_raw;
+
+	/*
+	 * The RAAC value is located in 16 bits across the RAAC MSB and
+	 * LSB registers
+	 * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+	 * MSB register
+	 * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+	 * LSB register
+	 */
+	ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB);
+	if (ret < 0)
+		return ret;
+
+	*charge_now = charge_raw * 1600;
+	return 0;
+}
+
+static int ds2781_get_control_register(struct ds2781_device_info *dev_info,
+	u8 *control_reg)
+{
+	return ds2781_read8(dev_info, control_reg, DS2781_CONTROL);
+}
+
+static int ds2781_set_control_register(struct ds2781_device_info *dev_info,
+	u8 control_reg)
+{
+	int ret;
+
+	ret = ds2781_write(dev_info, &control_reg,
+				DS2781_CONTROL, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return ds2781_save_eeprom(dev_info, DS2781_CONTROL);
+}
+
+static int ds2781_battery_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret = 0;
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ds2781_get_voltage(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds2781_get_temperature(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = model;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = manufacturer;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds2781_get_status(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = ds2781_get_capacity(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = ds2781_get_accumulated_current(dev_info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = ds2781_get_charge_now(dev_info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property ds2781_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2781_get_pmod_enabled(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 control_reg;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	/* Get power mode */
+	ret = ds2781_get_control_register(dev_info, &control_reg);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n",
+		 !!(control_reg & DS2781_CONTROL_PMOD));
+}
+
+static ssize_t ds2781_set_pmod_enabled(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 control_reg, new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	/* Set power mode */
+	ret = ds2781_get_control_register(dev_info, &control_reg);
+	if (ret < 0)
+		return ret;
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	if ((new_setting != 0) && (new_setting != 1)) {
+		dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+		return -EINVAL;
+	}
+
+	if (new_setting)
+		control_reg |= DS2781_CONTROL_PMOD;
+	else
+		control_reg &= ~DS2781_CONTROL_PMOD;
+
+	ret = ds2781_set_control_register(dev_info, control_reg);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2781_get_sense_resistor_value(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 sense_resistor;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP);
+	if (ret < 0)
+		return ret;
+
+	ret = sprintf(buf, "%d\n", sense_resistor);
+	return ret;
+}
+
+static ssize_t ds2781_set_sense_resistor_value(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2781_set_sense_register(dev_info, new_setting);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2781_get_rsgain_setting(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u16 rsgain;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = ds2781_get_rsgain_register(dev_info, &rsgain);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2781_set_rsgain_setting(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u16 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = kstrtou16(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	/* Gain can only be from 0 to 1.999 in steps of .001 */
+	if (new_setting > 1999) {
+		dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+		return -EINVAL;
+	}
+
+	ret = ds2781_set_rsgain_register(dev_info, new_setting);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2781_get_pio_pin(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	int ret;
+	u8 sfr;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = ds2781_read8(dev_info, &sfr, DS2781_SFR);
+	if (ret < 0)
+		return ret;
+
+	ret = sprintf(buf, "%d\n", sfr & DS2781_SFR_PIOSC);
+	return ret;
+}
+
+static ssize_t ds2781_set_pio_pin(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	int ret;
+	u8 new_setting;
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	ret = kstrtou8(buf, 0, &new_setting);
+	if (ret < 0)
+		return ret;
+
+	if ((new_setting != 0) && (new_setting != 1)) {
+		dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+		return -EINVAL;
+	}
+
+	ret = ds2781_write(dev_info, &new_setting,
+				DS2781_SFR, sizeof(u8));
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	return ds2781_read_block(dev_info, buf,
+				DS2781_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+	int ret;
+
+	ret = ds2781_write(dev_info, buf,
+				DS2781_EEPROM_BLOCK1_START + off, count);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+	.attr = {
+		.name = "param_eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS2781_PARAM_EEPROM_SIZE,
+	.read = ds2781_read_param_eeprom_bin,
+	.write = ds2781_write_param_eeprom_bin,
+};
+
+static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+	return ds2781_read_block(dev_info, buf,
+				DS2781_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
+				struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = to_power_supply(dev);
+	struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+	int ret;
+
+	ret = ds2781_write(dev_info, buf,
+				DS2781_EEPROM_BLOCK0_START + off, count);
+	if (ret < 0)
+		return ret;
+
+	ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+	.attr = {
+		.name = "user_eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = DS2781_USER_EEPROM_SIZE,
+	.read = ds2781_read_user_eeprom_bin,
+	.write = ds2781_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled,
+	ds2781_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+	ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting,
+	ds2781_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin,
+	ds2781_set_pio_pin);
+
+static struct attribute *ds2781_sysfs_attrs[] = {
+	&dev_attr_pmod_enabled.attr,
+	&dev_attr_sense_resistor_value.attr,
+	&dev_attr_rsgain_setting.attr,
+	&dev_attr_pio_pin.attr,
+	NULL
+};
+
+static struct bin_attribute *ds2781_sysfs_bin_attrs[] = {
+	&ds2781_param_eeprom_bin_attr,
+	&ds2781_user_eeprom_bin_attr,
+	NULL,
+};
+
+static const struct attribute_group ds2781_sysfs_group = {
+	.attrs = ds2781_sysfs_attrs,
+	.bin_attrs = ds2781_sysfs_bin_attrs,
+
+};
+
+static const struct attribute_group *ds2781_sysfs_groups[] = {
+	&ds2781_sysfs_group,
+	NULL,
+};
+
+static int ds2781_battery_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct ds2781_device_info *dev_info;
+
+	dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev_info);
+
+	dev_info->dev			= &pdev->dev;
+	dev_info->w1_dev		= pdev->dev.parent;
+	dev_info->bat_desc.name		= dev_name(&pdev->dev);
+	dev_info->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
+	dev_info->bat_desc.properties	= ds2781_battery_props;
+	dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2781_battery_props);
+	dev_info->bat_desc.get_property	= ds2781_battery_get_property;
+
+	psy_cfg.drv_data		= dev_info;
+	psy_cfg.attr_grp		= ds2781_sysfs_groups;
+
+	dev_info->bat = devm_power_supply_register(&pdev->dev,
+						   &dev_info->bat_desc,
+						   &psy_cfg);
+	if (IS_ERR(dev_info->bat)) {
+		dev_err(dev_info->dev, "failed to register battery\n");
+		return PTR_ERR(dev_info->bat);
+	}
+
+	return 0;
+}
+
+static struct platform_driver ds2781_battery_driver = {
+	.driver = {
+		.name = "ds2781-battery",
+	},
+	.probe	  = ds2781_battery_probe,
+};
+module_platform_driver(ds2781_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC driver");
+MODULE_ALIAS("platform:ds2781-battery");
+
diff --git a/drivers/power/supply/ds2782_battery.c b/drivers/power/supply/ds2782_battery.c
new file mode 100644
index 000000000..d78cd0540
--- /dev/null
+++ b/drivers/power/supply/ds2782_battery.c
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon
+ *
+ * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
+ *
+ * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/ds2782_battery.h>
+
+#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */
+
+#define DS278x_REG_VOLT_MSB	0x0c
+#define DS278x_REG_TEMP_MSB	0x0a
+#define DS278x_REG_CURRENT_MSB	0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS	1563
+
+#define DS2786_REG_RARC		0x02	/* Remaining active relative capacity */
+
+#define DS2786_CURRENT_UNITS	25
+
+#define DS278x_DELAY		1000
+
+struct ds278x_info;
+
+struct ds278x_battery_ops {
+	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
+	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
+};
+
+#define to_ds278x_info(x) power_supply_get_drvdata(x)
+
+struct ds278x_info {
+	struct i2c_client	*client;
+	struct power_supply	*battery;
+	struct power_supply_desc	battery_desc;
+	const struct ds278x_battery_ops *ops;
+	struct delayed_work	bat_work;
+	int			id;
+	int                     rsns;
+	int			capacity;
+	int			status;		/* State Of Charge */
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(info->client, reg);
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
+				    s16 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(info->client, reg_msb);
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = swab16(ret);
+	return 0;
+}
+
+static int ds278x_get_temp(struct ds278x_info *info, int *temp)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Temperature is measured in units of 0.125 degrees celcius, the
+	 * power_supply class measures temperature in tenths of degrees
+	 * celsius. The temperature value is stored as a 10 bit number, plus
+	 * sign in the upper bits of a 16 bit register.
+	 */
+	err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
+	if (err)
+		return err;
+	*temp = ((raw / 32) * 125) / 100;
+	return 0;
+}
+
+static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
+{
+	int sense_res;
+	int err;
+	u8 sense_res_raw;
+	s16 raw;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+	if (err)
+		return err;
+	if (sense_res_raw == 0) {
+		dev_err(&info->client->dev, "sense resistor value is 0\n");
+		return -ENXIO;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+		sense_res);
+	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
+	if (err)
+		return err;
+	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Voltage is measured in units of 4.88mV. The voltage is stored as
+	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
+	 */
+	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
+	if (err)
+		return err;
+	*voltage_uV = (raw / 32) * 4800;
+	return 0;
+}
+
+static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
+{
+	int err;
+	u8 raw;
+
+	err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
+	if (err)
+		return err;
+	*capacity = raw;
+	return 0;
+}
+
+static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
+{
+	int err;
+	s16 raw;
+
+	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
+	if (err)
+		return err;
+	*current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
+	return 0;
+}
+
+static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Voltage is measured in units of 1.22mV. The voltage is stored as
+	 * a 12-bit number plus sign, in the upper bits of a 16-bit register
+	 */
+	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
+	if (err)
+		return err;
+	*voltage_uV = (raw / 8) * 1220;
+	return 0;
+}
+
+static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
+{
+	int err;
+	u8 raw;
+
+	err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
+	if (err)
+		return err;
+	/* Relative capacity is displayed with resolution 0.5 % */
+	*capacity = raw/2 ;
+	return 0;
+}
+
+static int ds278x_get_status(struct ds278x_info *info, int *status)
+{
+	int err;
+	int current_uA;
+	int capacity;
+
+	err = info->ops->get_battery_current(info, &current_uA);
+	if (err)
+		return err;
+
+	err = info->ops->get_battery_capacity(info, &capacity);
+	if (err)
+		return err;
+
+	info->capacity = capacity;
+
+	if (capacity == 100)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else if (current_uA == 0)
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (current_uA < 0)
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
+static int ds278x_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct ds278x_info *info = to_ds278x_info(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds278x_get_status(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = info->ops->get_battery_capacity(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = info->ops->get_battery_voltage(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = info->ops->get_battery_current(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds278x_get_temp(info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void ds278x_bat_update(struct ds278x_info *info)
+{
+	int old_status = info->status;
+	int old_capacity = info->capacity;
+
+	ds278x_get_status(info, &info->status);
+
+	if ((old_status != info->status) || (old_capacity != info->capacity))
+		power_supply_changed(info->battery);
+}
+
+static void ds278x_bat_work(struct work_struct *work)
+{
+	struct ds278x_info *info;
+
+	info = container_of(work, struct ds278x_info, bat_work.work);
+	ds278x_bat_update(info);
+
+	schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+}
+
+static enum power_supply_property ds278x_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds278x_power_supply_init(struct power_supply_desc *battery)
+{
+	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties		= ds278x_battery_props;
+	battery->num_properties		= ARRAY_SIZE(ds278x_battery_props);
+	battery->get_property		= ds278x_battery_get_property;
+	battery->external_power_changed	= NULL;
+}
+
+static void ds278x_battery_remove(struct i2c_client *client)
+{
+	struct ds278x_info *info = i2c_get_clientdata(client);
+	int id = info->id;
+
+	power_supply_unregister(info->battery);
+	cancel_delayed_work_sync(&info->bat_work);
+	kfree(info->battery_desc.name);
+	kfree(info);
+
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, id);
+	mutex_unlock(&battery_lock);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ds278x_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds278x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->bat_work);
+	return 0;
+}
+
+static int ds278x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds278x_info *info = i2c_get_clientdata(client);
+
+	schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume);
+
+enum ds278x_num_id {
+	DS2782 = 0,
+	DS2786,
+};
+
+static const struct ds278x_battery_ops ds278x_ops[] = {
+	[DS2782] = {
+		.get_battery_current  = ds2782_get_current,
+		.get_battery_voltage  = ds2782_get_voltage,
+		.get_battery_capacity = ds2782_get_capacity,
+	},
+	[DS2786] = {
+		.get_battery_current  = ds2786_get_current,
+		.get_battery_voltage  = ds2786_get_voltage,
+		.get_battery_capacity = ds2786_get_capacity,
+	}
+};
+
+static int ds278x_battery_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct ds278x_platform_data *pdata = client->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+	struct ds278x_info *info;
+	int ret;
+	int num;
+
+	/*
+	 * ds2786 should have the sense resistor value set
+	 * in the platform data
+	 */
+	if (id->driver_data == DS2786 && !pdata) {
+		dev_err(&client->dev, "missing platform data for ds2786\n");
+		return -EINVAL;
+	}
+
+	/* Get an ID for this battery */
+	mutex_lock(&battery_lock);
+	ret = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
+	mutex_unlock(&battery_lock);
+	if (ret < 0)
+		goto fail_id;
+	num = ret;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	info->battery_desc.name = kasprintf(GFP_KERNEL, "%s-%d",
+					    client->name, num);
+	if (!info->battery_desc.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	if (id->driver_data == DS2786)
+		info->rsns = pdata->rsns;
+
+	i2c_set_clientdata(client, info);
+	info->client = client;
+	info->id = num;
+	info->ops  = &ds278x_ops[id->driver_data];
+	ds278x_power_supply_init(&info->battery_desc);
+	psy_cfg.drv_data = info;
+
+	info->capacity = 100;
+	info->status = POWER_SUPPLY_STATUS_FULL;
+
+	INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
+
+	info->battery = power_supply_register(&client->dev,
+					      &info->battery_desc, &psy_cfg);
+	if (IS_ERR(info->battery)) {
+		dev_err(&client->dev, "failed to register battery\n");
+		ret = PTR_ERR(info->battery);
+		goto fail_register;
+	} else {
+		schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->battery_desc.name);
+fail_name:
+	kfree(info);
+fail_info:
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, num);
+	mutex_unlock(&battery_lock);
+fail_id:
+	return ret;
+}
+
+static const struct i2c_device_id ds278x_id[] = {
+	{"ds2782", DS2782},
+	{"ds2786", DS2786},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ds278x_id);
+
+static struct i2c_driver ds278x_battery_driver = {
+	.driver 	= {
+		.name	= "ds2782-battery",
+		.pm	= &ds278x_battery_pm_ops,
+	},
+	.probe		= ds278x_battery_probe,
+	.remove		= ds278x_battery_remove,
+	.id_table	= ds278x_id,
+};
+module_i2c_driver(ds278x_battery_driver);
+
+MODULE_AUTHOR("Ryan Mallon");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
new file mode 100644
index 000000000..0af536f49
--- /dev/null
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -0,0 +1,420 @@
+/*
+ * Generic battery driver code using IIO
+ * Copyright (C) 2012, Anish Kumar <anish198519851985@gmail.com>
+ * based on jz4740-battery.c
+ * based on s3c_adc_battery.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/power/generic-adc-battery.h>
+
+#define JITTER_DEFAULT 10 /* hope 10ms is enough */
+
+enum gab_chan_type {
+	GAB_VOLTAGE = 0,
+	GAB_CURRENT,
+	GAB_POWER,
+	GAB_MAX_CHAN_TYPE
+};
+
+/*
+ * gab_chan_name suggests the standard channel names for commonly used
+ * channel types.
+ */
+static const char *const gab_chan_name[] = {
+	[GAB_VOLTAGE]	= "voltage",
+	[GAB_CURRENT]	= "current",
+	[GAB_POWER]		= "power",
+};
+
+struct gab {
+	struct power_supply		*psy;
+	struct power_supply_desc	psy_desc;
+	struct iio_channel	*channel[GAB_MAX_CHAN_TYPE];
+	struct gab_platform_data	*pdata;
+	struct delayed_work bat_work;
+	int	level;
+	int	status;
+	bool cable_plugged;
+	struct gpio_desc *charge_finished;
+};
+
+static struct gab *to_generic_bat(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static void gab_ext_power_changed(struct power_supply *psy)
+{
+	struct gab *adc_bat = to_generic_bat(psy);
+
+	schedule_delayed_work(&adc_bat->bat_work, msecs_to_jiffies(0));
+}
+
+static const enum power_supply_property gab_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+/*
+ * This properties are set based on the received platform data and this
+ * should correspond one-to-one with enum chan_type.
+ */
+static const enum power_supply_property gab_dyn_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_POWER_NOW,
+};
+
+static bool gab_charge_finished(struct gab *adc_bat)
+{
+	if (!adc_bat->charge_finished)
+		return false;
+	return gpiod_get_value(adc_bat->charge_finished);
+}
+
+static int gab_get_status(struct gab *adc_bat)
+{
+	struct gab_platform_data *pdata = adc_bat->pdata;
+	struct power_supply_info *bat_info;
+
+	bat_info = &pdata->battery_info;
+	if (adc_bat->level == bat_info->charge_full_design)
+		return POWER_SUPPLY_STATUS_FULL;
+	return adc_bat->status;
+}
+
+static enum gab_chan_type gab_prop_to_chan(enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		return GAB_POWER;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return GAB_VOLTAGE;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return GAB_CURRENT;
+	default:
+		WARN_ON(1);
+		break;
+	}
+	return GAB_POWER;
+}
+
+static int read_channel(struct gab *adc_bat, enum power_supply_property psp,
+		int *result)
+{
+	int ret;
+	int chan_index;
+
+	chan_index = gab_prop_to_chan(psp);
+	ret = iio_read_channel_processed(adc_bat->channel[chan_index],
+			result);
+	if (ret < 0)
+		pr_err("read channel error\n");
+	else
+		*result *= 1000;
+
+	return ret;
+}
+
+static int gab_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct gab *adc_bat;
+	struct gab_platform_data *pdata;
+	struct power_supply_info *bat_info;
+	int result = 0;
+	int ret = 0;
+
+	adc_bat = to_generic_bat(psy);
+	if (!adc_bat) {
+		dev_err(&psy->dev, "no battery infos ?!\n");
+		return -EINVAL;
+	}
+	pdata = adc_bat->pdata;
+	bat_info = &pdata->battery_info;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = gab_get_status(adc_bat);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+		val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = pdata->cal_charge(result);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		ret = read_channel(adc_bat, psp, &result);
+		if (ret < 0)
+			goto err;
+		val->intval = result;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat_info->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat_info->voltage_min_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat_info->voltage_max_design;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = bat_info->charge_full_design;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bat_info->name;
+		break;
+	default:
+		return -EINVAL;
+	}
+err:
+	return ret;
+}
+
+static void gab_work(struct work_struct *work)
+{
+	struct gab *adc_bat;
+	struct delayed_work *delayed_work;
+	bool is_plugged;
+	int status;
+
+	delayed_work = to_delayed_work(work);
+	adc_bat = container_of(delayed_work, struct gab, bat_work);
+	status = adc_bat->status;
+
+	is_plugged = power_supply_am_i_supplied(adc_bat->psy);
+	adc_bat->cable_plugged = is_plugged;
+
+	if (!is_plugged)
+		adc_bat->status =  POWER_SUPPLY_STATUS_DISCHARGING;
+	else if (gab_charge_finished(adc_bat))
+		adc_bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else
+		adc_bat->status = POWER_SUPPLY_STATUS_CHARGING;
+
+	if (status != adc_bat->status)
+		power_supply_changed(adc_bat->psy);
+}
+
+static irqreturn_t gab_charged(int irq, void *dev_id)
+{
+	struct gab *adc_bat = dev_id;
+	struct gab_platform_data *pdata = adc_bat->pdata;
+	int delay;
+
+	delay = pdata->jitter_delay ? pdata->jitter_delay : JITTER_DEFAULT;
+	schedule_delayed_work(&adc_bat->bat_work,
+			msecs_to_jiffies(delay));
+	return IRQ_HANDLED;
+}
+
+static int gab_probe(struct platform_device *pdev)
+{
+	struct gab *adc_bat;
+	struct power_supply_desc *psy_desc;
+	struct power_supply_config psy_cfg = {};
+	struct gab_platform_data *pdata = pdev->dev.platform_data;
+	enum power_supply_property *properties;
+	int ret = 0;
+	int chan;
+	int index = ARRAY_SIZE(gab_props);
+	bool any = false;
+
+	adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
+	if (!adc_bat) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	psy_cfg.drv_data = adc_bat;
+	psy_desc = &adc_bat->psy_desc;
+	psy_desc->name = pdata->battery_info.name;
+
+	/* bootup default values for the battery */
+	adc_bat->cable_plugged = false;
+	adc_bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	psy_desc->get_property = gab_get_property;
+	psy_desc->external_power_changed = gab_ext_power_changed;
+	adc_bat->pdata = pdata;
+
+	/*
+	 * copying the static properties and allocating extra memory for holding
+	 * the extra configurable properties received from platform data.
+	 */
+	properties = kcalloc(ARRAY_SIZE(gab_props) +
+			     ARRAY_SIZE(gab_chan_name),
+			     sizeof(*properties),
+			     GFP_KERNEL);
+	if (!properties) {
+		ret = -ENOMEM;
+		goto first_mem_fail;
+	}
+
+	memcpy(properties, gab_props, sizeof(gab_props));
+
+	/*
+	 * getting channel from iio and copying the battery properties
+	 * based on the channel supported by consumer device.
+	 */
+	for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+		adc_bat->channel[chan] = iio_channel_get(&pdev->dev,
+							 gab_chan_name[chan]);
+		if (IS_ERR(adc_bat->channel[chan])) {
+			ret = PTR_ERR(adc_bat->channel[chan]);
+			adc_bat->channel[chan] = NULL;
+		} else {
+			/* copying properties for supported channels only */
+			int index2;
+
+			for (index2 = 0; index2 < index; index2++) {
+				if (properties[index2] == gab_dyn_props[chan])
+					break;	/* already known */
+			}
+			if (index2 == index)	/* really new */
+				properties[index++] = gab_dyn_props[chan];
+			any = true;
+		}
+	}
+
+	/* none of the channels are supported so let's bail out */
+	if (!any) {
+		ret = -ENODEV;
+		goto second_mem_fail;
+	}
+
+	/*
+	 * Total number of properties is equal to static properties
+	 * plus the dynamic properties.Some properties may not be set
+	 * as come channels may be not be supported by the device.So
+	 * we need to take care of that.
+	 */
+	psy_desc->properties = properties;
+	psy_desc->num_properties = index;
+
+	adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
+	if (IS_ERR(adc_bat->psy)) {
+		ret = PTR_ERR(adc_bat->psy);
+		goto err_reg_fail;
+	}
+
+	INIT_DELAYED_WORK(&adc_bat->bat_work, gab_work);
+
+	adc_bat->charge_finished = devm_gpiod_get_optional(&pdev->dev,
+							   "charged", GPIOD_IN);
+	if (adc_bat->charge_finished) {
+		int irq;
+
+		irq = gpiod_to_irq(adc_bat->charge_finished);
+		ret = request_any_context_irq(irq, gab_charged,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"battery charged", adc_bat);
+		if (ret < 0)
+			goto gpio_req_fail;
+	}
+
+	platform_set_drvdata(pdev, adc_bat);
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&adc_bat->bat_work,
+			msecs_to_jiffies(0));
+	return 0;
+
+gpio_req_fail:
+	power_supply_unregister(adc_bat->psy);
+err_reg_fail:
+	for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+		if (adc_bat->channel[chan])
+			iio_channel_release(adc_bat->channel[chan]);
+	}
+second_mem_fail:
+	kfree(properties);
+first_mem_fail:
+	return ret;
+}
+
+static int gab_remove(struct platform_device *pdev)
+{
+	int chan;
+	struct gab *adc_bat = platform_get_drvdata(pdev);
+
+	power_supply_unregister(adc_bat->psy);
+
+	if (adc_bat->charge_finished)
+		free_irq(gpiod_to_irq(adc_bat->charge_finished), adc_bat);
+
+	for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+		if (adc_bat->channel[chan])
+			iio_channel_release(adc_bat->channel[chan]);
+	}
+
+	kfree(adc_bat->psy_desc.properties);
+	cancel_delayed_work_sync(&adc_bat->bat_work);
+	return 0;
+}
+
+static int __maybe_unused gab_suspend(struct device *dev)
+{
+	struct gab *adc_bat = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&adc_bat->bat_work);
+	adc_bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	return 0;
+}
+
+static int __maybe_unused gab_resume(struct device *dev)
+{
+	struct gab *adc_bat = dev_get_drvdata(dev);
+	struct gab_platform_data *pdata = adc_bat->pdata;
+	int delay;
+
+	delay = pdata->jitter_delay ? pdata->jitter_delay : JITTER_DEFAULT;
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&adc_bat->bat_work,
+			msecs_to_jiffies(delay));
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(gab_pm_ops, gab_suspend, gab_resume);
+
+static struct platform_driver gab_driver = {
+	.driver		= {
+		.name	= "generic-adc-battery",
+		.pm	= &gab_pm_ops,
+	},
+	.probe		= gab_probe,
+	.remove		= gab_remove,
+};
+module_platform_driver(gab_driver);
+
+MODULE_AUTHOR("anish kumar <anish198519851985@gmail.com>");
+MODULE_DESCRIPTION("generic battery driver using IIO");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/goldfish_battery.c b/drivers/power/supply/goldfish_battery.c
new file mode 100644
index 000000000..a58d713d7
--- /dev/null
+++ b/drivers/power/supply/goldfish_battery.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power supply driver for the goldfish emulator
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+struct goldfish_battery_data {
+	void __iomem *reg_base;
+	int irq;
+	spinlock_t lock;
+
+	struct power_supply *battery;
+	struct power_supply *ac;
+};
+
+#define GOLDFISH_BATTERY_READ(data, addr) \
+	(readl(data->reg_base + addr))
+#define GOLDFISH_BATTERY_WRITE(data, addr, x) \
+	(writel(x, data->reg_base + addr))
+
+enum {
+	/* status register */
+	BATTERY_INT_STATUS	= 0x00,
+	/* set this to enable IRQ */
+	BATTERY_INT_ENABLE	= 0x04,
+
+	BATTERY_AC_ONLINE	= 0x08,
+	BATTERY_STATUS		= 0x0C,
+	BATTERY_HEALTH		= 0x10,
+	BATTERY_PRESENT		= 0x14,
+	BATTERY_CAPACITY	= 0x18,
+	BATTERY_VOLTAGE		= 0x1C,
+	BATTERY_TEMP		= 0x20,
+	BATTERY_CHARGE_COUNTER	= 0x24,
+	BATTERY_VOLTAGE_MAX	= 0x28,
+	BATTERY_CURRENT_MAX	= 0x2C,
+	BATTERY_CURRENT_NOW	= 0x30,
+	BATTERY_CURRENT_AVG	= 0x34,
+	BATTERY_CHARGE_FULL_UAH	= 0x38,
+	BATTERY_CYCLE_COUNT	= 0x40,
+
+	BATTERY_STATUS_CHANGED	= 1U << 0,
+	AC_STATUS_CHANGED	= 1U << 1,
+	BATTERY_INT_MASK	= BATTERY_STATUS_CHANGED | AC_STATUS_CHANGED,
+};
+
+
+static int goldfish_ac_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct goldfish_battery_data *data = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_AC_ONLINE);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_VOLTAGE_MAX);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_MAX);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int goldfish_battery_get_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct goldfish_battery_data *data = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_STATUS);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_HEALTH);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CAPACITY);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_VOLTAGE);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_TEMP);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = GOLDFISH_BATTERY_READ(data,
+						    BATTERY_CHARGE_COUNTER);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_NOW);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_AVG);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = GOLDFISH_BATTERY_READ(data,
+						    BATTERY_CHARGE_FULL_UAH);
+		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CYCLE_COUNT);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property goldfish_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+};
+
+static enum power_supply_property goldfish_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static irqreturn_t goldfish_battery_interrupt(int irq, void *dev_id)
+{
+	unsigned long irq_flags;
+	struct goldfish_battery_data *data = dev_id;
+	uint32_t status;
+
+	spin_lock_irqsave(&data->lock, irq_flags);
+
+	/* read status flags, which will clear the interrupt */
+	status = GOLDFISH_BATTERY_READ(data, BATTERY_INT_STATUS);
+	status &= BATTERY_INT_MASK;
+
+	if (status & BATTERY_STATUS_CHANGED)
+		power_supply_changed(data->battery);
+	if (status & AC_STATUS_CHANGED)
+		power_supply_changed(data->ac);
+
+	spin_unlock_irqrestore(&data->lock, irq_flags);
+	return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static const struct power_supply_desc battery_desc = {
+	.properties	= goldfish_battery_props,
+	.num_properties	= ARRAY_SIZE(goldfish_battery_props),
+	.get_property	= goldfish_battery_get_property,
+	.name		= "battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+};
+
+static const struct power_supply_desc ac_desc = {
+	.properties	= goldfish_ac_props,
+	.num_properties	= ARRAY_SIZE(goldfish_ac_props),
+	.get_property	= goldfish_ac_get_property,
+	.name		= "ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+};
+
+static int goldfish_battery_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	struct goldfish_battery_data *data;
+	struct power_supply_config psy_cfg = {};
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&data->lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "platform_get_resource failed\n");
+		return -ENODEV;
+	}
+
+	data->reg_base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (data->reg_base == NULL) {
+		dev_err(&pdev->dev, "unable to remap MMIO\n");
+		return -ENOMEM;
+	}
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0)
+		return -ENODEV;
+
+	ret = devm_request_irq(&pdev->dev, data->irq,
+			       goldfish_battery_interrupt,
+			       IRQF_SHARED, pdev->name, data);
+	if (ret)
+		return ret;
+
+	psy_cfg.drv_data = data;
+
+	data->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg);
+	if (IS_ERR(data->ac))
+		return PTR_ERR(data->ac);
+
+	data->battery = power_supply_register(&pdev->dev, &battery_desc,
+						&psy_cfg);
+	if (IS_ERR(data->battery)) {
+		power_supply_unregister(data->ac);
+		return PTR_ERR(data->battery);
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK);
+	return 0;
+}
+
+static int goldfish_battery_remove(struct platform_device *pdev)
+{
+	struct goldfish_battery_data *data = platform_get_drvdata(pdev);
+
+	power_supply_unregister(data->battery);
+	power_supply_unregister(data->ac);
+	return 0;
+}
+
+static const struct of_device_id goldfish_battery_of_match[] = {
+	{ .compatible = "google,goldfish-battery", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_battery_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id goldfish_battery_acpi_match[] = {
+	{ "GFSH0001", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_battery_acpi_match);
+#endif
+
+static struct platform_driver goldfish_battery_device = {
+	.probe		= goldfish_battery_probe,
+	.remove		= goldfish_battery_remove,
+	.driver = {
+		.name = "goldfish-battery",
+		.of_match_table = goldfish_battery_of_match,
+		.acpi_match_table = ACPI_PTR(goldfish_battery_acpi_match),
+	}
+};
+module_platform_driver(goldfish_battery_device);
+
+MODULE_AUTHOR("Mike Lockwood lockwood@android.com");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for the Goldfish emulator");
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
new file mode 100644
index 000000000..68212b397
--- /dev/null
+++ b/drivers/power/supply/gpio-charger.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  Driver for chargers which report their online status through a GPIO pin
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/power/gpio-charger.h>
+
+struct gpio_mapping {
+	u32 limit_ua;
+	u32 gpiodata;
+} __packed;
+
+struct gpio_charger {
+	struct device *dev;
+	unsigned int irq;
+	unsigned int charge_status_irq;
+	bool wakeup_enabled;
+
+	struct power_supply *charger;
+	struct power_supply_desc charger_desc;
+	struct gpio_desc *gpiod;
+	struct gpio_desc *charge_status;
+
+	struct gpio_descs *current_limit_gpios;
+	struct gpio_mapping *current_limit_map;
+	u32 current_limit_map_size;
+	u32 charge_current_limit;
+};
+
+static irqreturn_t gpio_charger_irq(int irq, void *devid)
+{
+	struct power_supply *charger = devid;
+
+	power_supply_changed(charger);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
+{
+	struct gpio_mapping mapping;
+	int ndescs = gpio_charger->current_limit_gpios->ndescs;
+	struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
+	int i;
+
+	if (!gpio_charger->current_limit_map_size)
+		return -EINVAL;
+
+	for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua <= val)
+			break;
+	}
+	mapping = gpio_charger->current_limit_map[i];
+
+	for (i = 0; i < ndescs; i++) {
+		bool val = (mapping.gpiodata >> i) & 1;
+		gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
+	}
+
+	gpio_charger->charge_current_limit = mapping.limit_ua;
+
+	dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
+		gpio_charger->charge_current_limit, val);
+
+	return 0;
+}
+
+static int gpio_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (gpiod_get_value_cansleep(gpio_charger->charge_status))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = gpio_charger->charge_current_limit;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_set_property(struct power_supply *psy,
+	enum power_supply_property psp, const union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return set_charge_current_limit(gpio_charger, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static enum power_supply_type gpio_charger_get_type(struct device *dev)
+{
+	const char *chargetype;
+
+	if (!device_property_read_string(dev, "charger-type", &chargetype)) {
+		if (!strcmp("unknown", chargetype))
+			return POWER_SUPPLY_TYPE_UNKNOWN;
+		if (!strcmp("battery", chargetype))
+			return POWER_SUPPLY_TYPE_BATTERY;
+		if (!strcmp("ups", chargetype))
+			return POWER_SUPPLY_TYPE_UPS;
+		if (!strcmp("mains", chargetype))
+			return POWER_SUPPLY_TYPE_MAINS;
+		if (!strcmp("usb-sdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-dcp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-cdp", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+		if (!strcmp("usb-aca", chargetype))
+			return POWER_SUPPLY_TYPE_USB;
+	}
+	dev_warn(dev, "unknown charger type %s\n", chargetype);
+
+	return POWER_SUPPLY_TYPE_UNKNOWN;
+}
+
+static int gpio_charger_get_irq(struct device *dev, void *dev_id,
+				struct gpio_desc *gpio)
+{
+	int ret, irq = gpiod_to_irq(gpio);
+
+	if (irq > 0) {
+		ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq,
+						   IRQF_TRIGGER_RISING |
+						   IRQF_TRIGGER_FALLING,
+						   dev_name(dev),
+						   dev_id);
+		if (ret < 0) {
+			dev_warn(dev, "Failed to request irq: %d\n", ret);
+			irq = 0;
+		}
+	}
+
+	return irq;
+}
+
+static int init_charge_current_limit(struct device *dev,
+				    struct gpio_charger *gpio_charger)
+{
+	int i, len;
+	u32 cur_limit = U32_MAX;
+
+	gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
+		"charge-current-limit", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_charger->current_limit_gpios)) {
+		dev_err(dev, "error getting current-limit GPIOs\n");
+		return PTR_ERR(gpio_charger->current_limit_gpios);
+	}
+
+	if (!gpio_charger->current_limit_gpios)
+		return 0;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		NULL, 0);
+	if (len < 0)
+		return len;
+
+	if (len == 0 || len % 2) {
+		dev_err(dev, "invalid charge-current-limit-mapping length\n");
+		return -EINVAL;
+	}
+
+	gpio_charger->current_limit_map = devm_kmalloc_array(dev,
+		len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
+	if (!gpio_charger->current_limit_map)
+		return -ENOMEM;
+
+	gpio_charger->current_limit_map_size = len / 2;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		(u32*) gpio_charger->current_limit_map, len);
+	if (len < 0)
+		return len;
+
+	for (i=0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
+			dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
+			return -EINVAL;
+		}
+
+		cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+	}
+
+	/* default to smallest current limitation for safety reasons */
+	len = gpio_charger->current_limit_map_size - 1;
+	set_charge_current_limit(gpio_charger,
+		gpio_charger->current_limit_map[len].limit_ua);
+
+	return 0;
+}
+
+/*
+ * The entries will be overwritten by driver's probe routine depending
+ * on the available features. This list ensures, that the array is big
+ * enough for all optional features.
+ */
+static enum power_supply_property gpio_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+};
+
+static int gpio_charger_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct gpio_charger_platform_data *pdata = dev->platform_data;
+	struct power_supply_config psy_cfg = {};
+	struct gpio_charger *gpio_charger;
+	struct power_supply_desc *charger_desc;
+	struct gpio_desc *charge_status;
+	int charge_status_irq;
+	int ret;
+	int num_props = 0;
+
+	if (!pdata && !dev->of_node) {
+		dev_err(dev, "No platform data\n");
+		return -ENOENT;
+	}
+
+	gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
+	if (!gpio_charger)
+		return -ENOMEM;
+	gpio_charger->dev = dev;
+
+	/*
+	 * This will fetch a GPIO descriptor from device tree, ACPI or
+	 * boardfile descriptor tables. It's good to try this first.
+	 */
+	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
+	if (IS_ERR(gpio_charger->gpiod)) {
+		/* Just try again if this happens */
+		return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod),
+				     "error getting GPIO descriptor\n");
+	}
+
+	if (gpio_charger->gpiod) {
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
+		num_props++;
+	}
+
+	charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
+	if (IS_ERR(charge_status))
+		return PTR_ERR(charge_status);
+	if (charge_status) {
+		gpio_charger->charge_status = charge_status;
+		gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
+		num_props++;
+	}
+
+	ret = init_charge_current_limit(dev, gpio_charger);
+	if (ret < 0)
+		return ret;
+	if (gpio_charger->current_limit_map) {
+		gpio_charger_properties[num_props] =
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+		num_props++;
+	}
+
+	charger_desc = &gpio_charger->charger_desc;
+	charger_desc->properties = gpio_charger_properties;
+	charger_desc->num_properties = num_props;
+	charger_desc->get_property = gpio_charger_get_property;
+	charger_desc->set_property = gpio_charger_set_property;
+	charger_desc->property_is_writeable =
+					gpio_charger_property_is_writeable;
+
+	psy_cfg.of_node = dev->of_node;
+	psy_cfg.drv_data = gpio_charger;
+
+	if (pdata) {
+		charger_desc->name = pdata->name;
+		charger_desc->type = pdata->type;
+		psy_cfg.supplied_to = pdata->supplied_to;
+		psy_cfg.num_supplicants = pdata->num_supplicants;
+	} else {
+		charger_desc->name = dev->of_node->name;
+		charger_desc->type = gpio_charger_get_type(dev);
+	}
+
+	if (!charger_desc->name)
+		charger_desc->name = pdev->name;
+
+	gpio_charger->charger = devm_power_supply_register(dev, charger_desc,
+							   &psy_cfg);
+	if (IS_ERR(gpio_charger->charger)) {
+		ret = PTR_ERR(gpio_charger->charger);
+		dev_err(dev, "Failed to register power supply: %d\n", ret);
+		return ret;
+	}
+
+	gpio_charger->irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+						 gpio_charger->gpiod);
+
+	charge_status_irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+						 gpio_charger->charge_status);
+	gpio_charger->charge_status_irq = charge_status_irq;
+
+	platform_set_drvdata(pdev, gpio_charger);
+
+	device_init_wakeup(dev, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gpio_charger_suspend(struct device *dev)
+{
+	struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		gpio_charger->wakeup_enabled =
+			!enable_irq_wake(gpio_charger->irq);
+
+	return 0;
+}
+
+static int gpio_charger_resume(struct device *dev)
+{
+	struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled)
+		disable_irq_wake(gpio_charger->irq);
+	power_supply_changed(gpio_charger->charger);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops,
+		gpio_charger_suspend, gpio_charger_resume);
+
+static const struct of_device_id gpio_charger_match[] = {
+	{ .compatible = "gpio-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpio_charger_match);
+
+static struct platform_driver gpio_charger_driver = {
+	.probe = gpio_charger_probe,
+	.driver = {
+		.name = "gpio-charger",
+		.pm = &gpio_charger_pm_ops,
+		.of_match_table = gpio_charger_match,
+	},
+};
+
+module_platform_driver(gpio_charger_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-charger");
diff --git a/drivers/power/supply/ingenic-battery.c b/drivers/power/supply/ingenic-battery.c
new file mode 100644
index 000000000..2e7fdfde4
--- /dev/null
+++ b/drivers/power/supply/ingenic-battery.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Battery driver for the Ingenic JZ47xx SoCs
+ * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu>
+ *
+ * based on drivers/power/supply/jz4740-battery.c
+ */
+
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+
+struct ingenic_battery {
+	struct device *dev;
+	struct iio_channel *channel;
+	struct power_supply_desc desc;
+	struct power_supply *battery;
+	struct power_supply_battery_info *info;
+};
+
+static int ingenic_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct ingenic_battery *bat = power_supply_get_drvdata(psy);
+	struct power_supply_battery_info *info = bat->info;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = iio_read_channel_processed(bat->channel, &val->intval);
+		val->intval *= 1000;
+		if (val->intval < info->voltage_min_design_uv)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (val->intval > info->voltage_max_design_uv)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		return ret;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = iio_read_channel_processed(bat->channel, &val->intval);
+		val->intval *= 1000;
+		return ret;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = info->voltage_min_design_uv;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = info->voltage_max_design_uv;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Set the most appropriate IIO channel voltage reference scale
+ * based on the battery's max voltage.
+ */
+static int ingenic_battery_set_scale(struct ingenic_battery *bat)
+{
+	const int *scale_raw;
+	int scale_len, scale_type, best_idx = -1, best_mV, max_raw, i, ret;
+	u64 max_mV;
+
+	ret = iio_read_max_channel_raw(bat->channel, &max_raw);
+	if (ret) {
+		dev_err(bat->dev, "Unable to read max raw channel value\n");
+		return ret;
+	}
+
+	ret = iio_read_avail_channel_attribute(bat->channel, &scale_raw,
+					       &scale_type, &scale_len,
+					       IIO_CHAN_INFO_SCALE);
+	if (ret < 0) {
+		dev_err(bat->dev, "Unable to read channel avail scale\n");
+		return ret;
+	}
+	if (ret != IIO_AVAIL_LIST || scale_type != IIO_VAL_FRACTIONAL_LOG2)
+		return -EINVAL;
+
+	max_mV = bat->info->voltage_max_design_uv / 1000;
+
+	for (i = 0; i < scale_len; i += 2) {
+		u64 scale_mV = (max_raw * scale_raw[i]) >> scale_raw[i + 1];
+
+		if (scale_mV < max_mV)
+			continue;
+
+		if (best_idx >= 0 && scale_mV > best_mV)
+			continue;
+
+		best_mV = scale_mV;
+		best_idx = i;
+	}
+
+	if (best_idx < 0) {
+		dev_err(bat->dev, "Unable to find matching voltage scale\n");
+		return -EINVAL;
+	}
+
+	/* Only set scale if there is more than one (fractional) entry */
+	if (scale_len > 2) {
+		ret = iio_write_channel_attribute(bat->channel,
+						  scale_raw[best_idx],
+						  scale_raw[best_idx + 1],
+						  IIO_CHAN_INFO_SCALE);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property ingenic_battery_properties[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int ingenic_battery_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ingenic_battery *bat;
+	struct power_supply_config psy_cfg = {};
+	struct power_supply_desc *desc;
+	int ret;
+
+	bat = devm_kzalloc(dev, sizeof(*bat), GFP_KERNEL);
+	if (!bat)
+		return -ENOMEM;
+
+	bat->dev = dev;
+	bat->channel = devm_iio_channel_get(dev, "battery");
+	if (IS_ERR(bat->channel))
+		return PTR_ERR(bat->channel);
+
+	desc = &bat->desc;
+	desc->name = "jz-battery";
+	desc->type = POWER_SUPPLY_TYPE_BATTERY;
+	desc->properties = ingenic_battery_properties;
+	desc->num_properties = ARRAY_SIZE(ingenic_battery_properties);
+	desc->get_property = ingenic_battery_get_property;
+	psy_cfg.drv_data = bat;
+	psy_cfg.of_node = dev->of_node;
+
+	bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
+	if (IS_ERR(bat->battery))
+		return dev_err_probe(dev, PTR_ERR(bat->battery),
+				     "Unable to register battery\n");
+
+	ret = power_supply_get_battery_info(bat->battery, &bat->info);
+	if (ret) {
+		dev_err(dev, "Unable to get battery info: %d\n", ret);
+		return ret;
+	}
+	if (bat->info->voltage_min_design_uv < 0) {
+		dev_err(dev, "Unable to get voltage min design\n");
+		return bat->info->voltage_min_design_uv;
+	}
+	if (bat->info->voltage_max_design_uv < 0) {
+		dev_err(dev, "Unable to get voltage max design\n");
+		return bat->info->voltage_max_design_uv;
+	}
+
+	return ingenic_battery_set_scale(bat);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ingenic_battery_of_match[] = {
+	{ .compatible = "ingenic,jz4740-battery", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ingenic_battery_of_match);
+#endif
+
+static struct platform_driver ingenic_battery_driver = {
+	.driver = {
+		.name = "ingenic-battery",
+		.of_match_table = of_match_ptr(ingenic_battery_of_match),
+	},
+	.probe = ingenic_battery_probe,
+};
+module_platform_driver(ingenic_battery_driver);
+
+MODULE_DESCRIPTION("Battery driver for Ingenic JZ47xx SoCs");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ip5xxx_power.c b/drivers/power/supply/ip5xxx_power.c
new file mode 100644
index 000000000..00221e9c0
--- /dev/null
+++ b/drivers/power/supply/ip5xxx_power.c
@@ -0,0 +1,638 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Samuel Holland <samuel@sholland.org>
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define IP5XXX_SYS_CTL0			0x01
+#define IP5XXX_SYS_CTL0_WLED_DET_EN		BIT(4)
+#define IP5XXX_SYS_CTL0_WLED_EN			BIT(3)
+#define IP5XXX_SYS_CTL0_BOOST_EN		BIT(2)
+#define IP5XXX_SYS_CTL0_CHARGER_EN		BIT(1)
+#define IP5XXX_SYS_CTL1			0x02
+#define IP5XXX_SYS_CTL1_LIGHT_SHDN_EN		BIT(1)
+#define IP5XXX_SYS_CTL1_LOAD_PWRUP_EN		BIT(0)
+#define IP5XXX_SYS_CTL2			0x0c
+#define IP5XXX_SYS_CTL2_LIGHT_SHDN_TH		GENMASK(7, 3)
+#define IP5XXX_SYS_CTL3			0x03
+#define IP5XXX_SYS_CTL3_LONG_PRESS_TIME_SEL	GENMASK(7, 6)
+#define IP5XXX_SYS_CTL3_BTN_SHDN_EN		BIT(5)
+#define IP5XXX_SYS_CTL4			0x04
+#define IP5XXX_SYS_CTL4_SHDN_TIME_SEL		GENMASK(7, 6)
+#define IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN	BIT(5)
+#define IP5XXX_SYS_CTL5			0x07
+#define IP5XXX_SYS_CTL5_NTC_DIS			BIT(6)
+#define IP5XXX_SYS_CTL5_WLED_MODE_SEL		BIT(1)
+#define IP5XXX_SYS_CTL5_BTN_SHDN_SEL		BIT(0)
+#define IP5XXX_CHG_CTL1			0x22
+#define IP5XXX_CHG_CTL1_BOOST_UVP_SEL		GENMASK(3, 2)
+#define IP5XXX_CHG_CTL2			0x24
+#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL		GENMASK(6, 5)
+#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V	(0x0 << 5)
+#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V	(0x1 << 5)
+#define IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V	(0x2 << 5)
+#define IP5XXX_CHG_CTL2_CONST_VOLT_SEL		GENMASK(2, 1)
+#define IP5XXX_CHG_CTL4			0x26
+#define IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN		BIT(6)
+#define IP5XXX_CHG_CTL4A		0x25
+#define IP5XXX_CHG_CTL4A_CONST_CUR_SEL		GENMASK(4, 0)
+#define IP5XXX_MFP_CTL0			0x51
+#define IP5XXX_MFP_CTL1			0x52
+#define IP5XXX_GPIO_CTL2		0x53
+#define IP5XXX_GPIO_CTL2A		0x54
+#define IP5XXX_GPIO_CTL3		0x55
+#define IP5XXX_READ0			0x71
+#define IP5XXX_READ0_CHG_STAT			GENMASK(7, 5)
+#define IP5XXX_READ0_CHG_STAT_IDLE		(0x0 << 5)
+#define IP5XXX_READ0_CHG_STAT_TRICKLE		(0x1 << 5)
+#define IP5XXX_READ0_CHG_STAT_CONST_VOLT	(0x2 << 5)
+#define IP5XXX_READ0_CHG_STAT_CONST_CUR		(0x3 << 5)
+#define IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP	(0x4 << 5)
+#define IP5XXX_READ0_CHG_STAT_FULL		(0x5 << 5)
+#define IP5XXX_READ0_CHG_STAT_TIMEOUT		(0x6 << 5)
+#define IP5XXX_READ0_CHG_OP			BIT(4)
+#define IP5XXX_READ0_CHG_END			BIT(3)
+#define IP5XXX_READ0_CONST_VOLT_TIMEOUT		BIT(2)
+#define IP5XXX_READ0_CHG_TIMEOUT		BIT(1)
+#define IP5XXX_READ0_TRICKLE_TIMEOUT		BIT(0)
+#define IP5XXX_READ0_TIMEOUT			GENMASK(2, 0)
+#define IP5XXX_READ1			0x72
+#define IP5XXX_READ1_WLED_PRESENT		BIT(7)
+#define IP5XXX_READ1_LIGHT_LOAD			BIT(6)
+#define IP5XXX_READ1_VIN_OVERVOLT		BIT(5)
+#define IP5XXX_READ2			0x77
+#define IP5XXX_READ2_BTN_PRESS			BIT(3)
+#define IP5XXX_READ2_BTN_LONG_PRESS		BIT(1)
+#define IP5XXX_READ2_BTN_SHORT_PRESS		BIT(0)
+#define IP5XXX_BATVADC_DAT0		0xa2
+#define IP5XXX_BATVADC_DAT1		0xa3
+#define IP5XXX_BATIADC_DAT0		0xa4
+#define IP5XXX_BATIADC_DAT1		0xa5
+#define IP5XXX_BATOCV_DAT0		0xa8
+#define IP5XXX_BATOCV_DAT1		0xa9
+
+struct ip5xxx {
+	struct regmap *regmap;
+	bool initialized;
+};
+
+/*
+ * The IP5xxx charger only responds on I2C when it is "awake". The charger is
+ * generally only awake when VIN is powered or when its boost converter is
+ * enabled. Going into shutdown resets all register values. To handle this:
+ *  1) When any bus error occurs, assume the charger has gone into shutdown.
+ *  2) Attempt the initialization sequence on each subsequent register access
+ *     until it succeeds.
+ */
+static int ip5xxx_read(struct ip5xxx *ip5xxx, unsigned int reg,
+		       unsigned int *val)
+{
+	int ret;
+
+	ret = regmap_read(ip5xxx->regmap, reg, val);
+	if (ret)
+		ip5xxx->initialized = false;
+
+	return ret;
+}
+
+static int ip5xxx_update_bits(struct ip5xxx *ip5xxx, unsigned int reg,
+			      unsigned int mask, unsigned int val)
+{
+	int ret;
+
+	ret = regmap_update_bits(ip5xxx->regmap, reg, mask, val);
+	if (ret)
+		ip5xxx->initialized = false;
+
+	return ret;
+}
+
+static int ip5xxx_initialize(struct power_supply *psy)
+{
+	struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy);
+	int ret;
+
+	if (ip5xxx->initialized)
+		return 0;
+
+	/*
+	 * Disable shutdown under light load.
+	 * Enable power on when under load.
+	 */
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL1,
+				 IP5XXX_SYS_CTL1_LIGHT_SHDN_EN |
+				 IP5XXX_SYS_CTL1_LOAD_PWRUP_EN,
+				 IP5XXX_SYS_CTL1_LOAD_PWRUP_EN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable shutdown after a long button press (as configured below).
+	 */
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL3,
+				 IP5XXX_SYS_CTL3_BTN_SHDN_EN,
+				 IP5XXX_SYS_CTL3_BTN_SHDN_EN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Power on automatically when VIN is removed.
+	 */
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL4,
+				 IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN,
+				 IP5XXX_SYS_CTL4_VIN_PULLOUT_BOOST_EN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable the NTC.
+	 * Configure the button for two presses => LED, long press => shutdown.
+	 */
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL5,
+				 IP5XXX_SYS_CTL5_NTC_DIS |
+				 IP5XXX_SYS_CTL5_WLED_MODE_SEL |
+				 IP5XXX_SYS_CTL5_BTN_SHDN_SEL,
+				 IP5XXX_SYS_CTL5_WLED_MODE_SEL |
+				 IP5XXX_SYS_CTL5_BTN_SHDN_SEL);
+	if (ret)
+		return ret;
+
+	ip5xxx->initialized = true;
+	dev_dbg(psy->dev.parent, "Initialized after power on\n");
+
+	return 0;
+}
+
+static const enum power_supply_property ip5xxx_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static int ip5xxx_battery_get_status(struct ip5xxx *ip5xxx, int *val)
+{
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval);
+	if (ret)
+		return ret;
+
+	switch (rval & IP5XXX_READ0_CHG_STAT) {
+	case IP5XXX_READ0_CHG_STAT_IDLE:
+		*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case IP5XXX_READ0_CHG_STAT_TRICKLE:
+	case IP5XXX_READ0_CHG_STAT_CONST_CUR:
+	case IP5XXX_READ0_CHG_STAT_CONST_VOLT:
+		*val = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP:
+	case IP5XXX_READ0_CHG_STAT_FULL:
+		*val = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case IP5XXX_READ0_CHG_STAT_TIMEOUT:
+		*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ip5xxx_battery_get_charge_type(struct ip5xxx *ip5xxx, int *val)
+{
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval);
+	if (ret)
+		return ret;
+
+	switch (rval & IP5XXX_READ0_CHG_STAT) {
+	case IP5XXX_READ0_CHG_STAT_IDLE:
+	case IP5XXX_READ0_CHG_STAT_CONST_VOLT_STOP:
+	case IP5XXX_READ0_CHG_STAT_FULL:
+	case IP5XXX_READ0_CHG_STAT_TIMEOUT:
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case IP5XXX_READ0_CHG_STAT_TRICKLE:
+		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case IP5XXX_READ0_CHG_STAT_CONST_CUR:
+	case IP5XXX_READ0_CHG_STAT_CONST_VOLT:
+		*val = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ip5xxx_battery_get_health(struct ip5xxx *ip5xxx, int *val)
+{
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_read(ip5xxx, IP5XXX_READ0, &rval);
+	if (ret)
+		return ret;
+
+	if (rval & IP5XXX_READ0_TIMEOUT)
+		*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+	else
+		*val = POWER_SUPPLY_HEALTH_GOOD;
+
+	return 0;
+}
+
+static int ip5xxx_battery_get_voltage_max(struct ip5xxx *ip5xxx, int *val)
+{
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL2, &rval);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is not clear what this will return if
+	 * IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN is not set...
+	 */
+	switch (rval & IP5XXX_CHG_CTL2_BAT_TYPE_SEL) {
+	case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V:
+		*val = 4200000;
+		break;
+	case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V:
+		*val = 4300000;
+		break;
+	case IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V:
+		*val = 4350000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ip5xxx_battery_read_adc(struct ip5xxx *ip5xxx,
+				   u8 lo_reg, u8 hi_reg, int *val)
+{
+	unsigned int hi, lo;
+	int ret;
+
+	ret = ip5xxx_read(ip5xxx, lo_reg, &lo);
+	if (ret)
+		return ret;
+
+	ret = ip5xxx_read(ip5xxx, hi_reg, &hi);
+	if (ret)
+		return ret;
+
+	*val = sign_extend32(hi << 8 | lo, 13);
+
+	return 0;
+}
+
+static int ip5xxx_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy);
+	int raw, ret, vmax;
+	unsigned int rval;
+
+	ret = ip5xxx_initialize(psy);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return ip5xxx_battery_get_status(ip5xxx, &val->intval);
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return ip5xxx_battery_get_charge_type(ip5xxx, &val->intval);
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		return ip5xxx_battery_get_health(ip5xxx, &val->intval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		return ip5xxx_battery_get_voltage_max(ip5xxx, &val->intval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATVADC_DAT0,
+					      IP5XXX_BATVADC_DAT1, &raw);
+
+		val->intval = 2600000 + DIV_ROUND_CLOSEST(raw * 26855, 100);
+		return 0;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATOCV_DAT0,
+					      IP5XXX_BATOCV_DAT1, &raw);
+
+		val->intval = 2600000 + DIV_ROUND_CLOSEST(raw * 26855, 100);
+		return 0;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ip5xxx_battery_read_adc(ip5xxx, IP5XXX_BATIADC_DAT0,
+					      IP5XXX_BATIADC_DAT1, &raw);
+
+		val->intval = DIV_ROUND_CLOSEST(raw * 149197, 200);
+		return 0;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL4A, &rval);
+		if (ret)
+			return ret;
+
+		rval &= IP5XXX_CHG_CTL4A_CONST_CUR_SEL;
+		val->intval = 100000 * rval;
+		return 0;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = 100000 * 0x1f;
+		return 0;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax);
+		if (ret)
+			return ret;
+
+		ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL2, &rval);
+		if (ret)
+			return ret;
+
+		rval &= IP5XXX_CHG_CTL2_CONST_VOLT_SEL;
+		val->intval = vmax + 14000 * (rval >> 1);
+		return 0;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax);
+		if (ret)
+			return ret;
+
+		val->intval = vmax + 14000 * 3;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ip5xxx_battery_set_voltage_max(struct ip5xxx *ip5xxx, int val)
+{
+	unsigned int rval;
+	int ret;
+
+	switch (val) {
+	case 4200000:
+		rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_2V;
+		break;
+	case 4300000:
+		rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_3V;
+		break;
+	case 4350000:
+		rval = IP5XXX_CHG_CTL2_BAT_TYPE_SEL_4_35V;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL2,
+				 IP5XXX_CHG_CTL2_BAT_TYPE_SEL, rval);
+	if (ret)
+		return ret;
+
+	ret = ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL4,
+				 IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN,
+				 IP5XXX_CHG_CTL4_BAT_TYPE_SEL_EN);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ip5xxx_battery_set_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy);
+	unsigned int rval;
+	int ret, vmax;
+
+	ret = ip5xxx_initialize(psy);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			rval = IP5XXX_SYS_CTL0_CHARGER_EN;
+			break;
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			rval = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL0,
+					  IP5XXX_SYS_CTL0_CHARGER_EN, rval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		return ip5xxx_battery_set_voltage_max(ip5xxx, val->intval);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		rval = val->intval / 100000;
+		return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL4A,
+					  IP5XXX_CHG_CTL4A_CONST_CUR_SEL, rval);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = ip5xxx_battery_get_voltage_max(ip5xxx, &vmax);
+		if (ret)
+			return ret;
+
+		rval = ((val->intval - vmax) / 14000) << 1;
+		return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL2,
+					  IP5XXX_CHG_CTL2_CONST_VOLT_SEL, rval);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ip5xxx_battery_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_STATUS ||
+	       psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
+	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
+	       psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE;
+}
+
+static const struct power_supply_desc ip5xxx_battery_desc = {
+	.name			= "ip5xxx-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= ip5xxx_battery_properties,
+	.num_properties		= ARRAY_SIZE(ip5xxx_battery_properties),
+	.get_property		= ip5xxx_battery_get_property,
+	.set_property		= ip5xxx_battery_set_property,
+	.property_is_writeable	= ip5xxx_battery_property_is_writeable,
+};
+
+static const enum power_supply_property ip5xxx_boost_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+};
+
+static int ip5xxx_boost_get_property(struct power_supply *psy,
+				     enum power_supply_property psp,
+				     union power_supply_propval *val)
+{
+	struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy);
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_initialize(psy);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = ip5xxx_read(ip5xxx, IP5XXX_SYS_CTL0, &rval);
+		if (ret)
+			return ret;
+
+		val->intval = !!(rval & IP5XXX_SYS_CTL0_BOOST_EN);
+		return 0;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		ret = ip5xxx_read(ip5xxx, IP5XXX_CHG_CTL1, &rval);
+		if (ret)
+			return ret;
+
+		rval &= IP5XXX_CHG_CTL1_BOOST_UVP_SEL;
+		val->intval = 4530000 + 100000 * (rval >> 2);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ip5xxx_boost_set_property(struct power_supply *psy,
+				     enum power_supply_property psp,
+				     const union power_supply_propval *val)
+{
+	struct ip5xxx *ip5xxx = power_supply_get_drvdata(psy);
+	unsigned int rval;
+	int ret;
+
+	ret = ip5xxx_initialize(psy);
+	if (ret)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		rval = val->intval ? IP5XXX_SYS_CTL0_BOOST_EN : 0;
+		return ip5xxx_update_bits(ip5xxx, IP5XXX_SYS_CTL0,
+					  IP5XXX_SYS_CTL0_BOOST_EN, rval);
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		rval = ((val->intval - 4530000) / 100000) << 2;
+		return ip5xxx_update_bits(ip5xxx, IP5XXX_CHG_CTL1,
+					  IP5XXX_CHG_CTL1_BOOST_UVP_SEL, rval);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ip5xxx_boost_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	return true;
+}
+
+static const struct power_supply_desc ip5xxx_boost_desc = {
+	.name			= "ip5xxx-boost",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= ip5xxx_boost_properties,
+	.num_properties		= ARRAY_SIZE(ip5xxx_boost_properties),
+	.get_property		= ip5xxx_boost_get_property,
+	.set_property		= ip5xxx_boost_set_property,
+	.property_is_writeable	= ip5xxx_boost_property_is_writeable,
+};
+
+static const struct regmap_config ip5xxx_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= IP5XXX_BATOCV_DAT1,
+};
+
+static int ip5xxx_power_probe(struct i2c_client *client)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = &client->dev;
+	struct power_supply *psy;
+	struct ip5xxx *ip5xxx;
+
+	ip5xxx = devm_kzalloc(dev, sizeof(*ip5xxx), GFP_KERNEL);
+	if (!ip5xxx)
+		return -ENOMEM;
+
+	ip5xxx->regmap = devm_regmap_init_i2c(client, &ip5xxx_regmap_config);
+	if (IS_ERR(ip5xxx->regmap))
+		return PTR_ERR(ip5xxx->regmap);
+
+	psy_cfg.of_node = dev->of_node;
+	psy_cfg.drv_data = ip5xxx;
+
+	psy = devm_power_supply_register(dev, &ip5xxx_battery_desc, &psy_cfg);
+	if (IS_ERR(psy))
+		return PTR_ERR(psy);
+
+	psy = devm_power_supply_register(dev, &ip5xxx_boost_desc, &psy_cfg);
+	if (IS_ERR(psy))
+		return PTR_ERR(psy);
+
+	return 0;
+}
+
+static const struct of_device_id ip5xxx_power_of_match[] = {
+	{ .compatible = "injoinic,ip5108" },
+	{ .compatible = "injoinic,ip5109" },
+	{ .compatible = "injoinic,ip5207" },
+	{ .compatible = "injoinic,ip5209" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ip5xxx_power_of_match);
+
+static struct i2c_driver ip5xxx_power_driver = {
+	.probe_new	= ip5xxx_power_probe,
+	.driver		= {
+		.name		= "ip5xxx-power",
+		.of_match_table	= ip5xxx_power_of_match,
+	}
+};
+module_i2c_driver(ip5xxx_power_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Injoinic IP5xxx power bank IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ipaq_micro_battery.c b/drivers/power/supply/ipaq_micro_battery.c
new file mode 100644
index 000000000..192d9db0f
--- /dev/null
+++ b/drivers/power/supply/ipaq_micro_battery.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * h3xxx atmel micro companion support, battery subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/power_supply.h>
+#include <linux/workqueue.h>
+
+#define BATT_PERIOD 100000 /* 100 seconds in milliseconds */
+
+#define MICRO_BATT_CHEM_ALKALINE	0x01
+#define MICRO_BATT_CHEM_NICD		0x02
+#define MICRO_BATT_CHEM_NIMH		0x03
+#define MICRO_BATT_CHEM_LION		0x04
+#define MICRO_BATT_CHEM_LIPOLY		0x05
+#define MICRO_BATT_CHEM_NOT_INSTALLED	0x06
+#define MICRO_BATT_CHEM_UNKNOWN		0xff
+
+#define MICRO_BATT_STATUS_HIGH		0x01
+#define MICRO_BATT_STATUS_LOW		0x02
+#define MICRO_BATT_STATUS_CRITICAL	0x04
+#define MICRO_BATT_STATUS_CHARGING	0x08
+#define MICRO_BATT_STATUS_CHARGEMAIN	0x10
+#define MICRO_BATT_STATUS_DEAD		0x20 /* Battery will not charge */
+#define MICRO_BATT_STATUS_NOTINSTALLED	0x20 /* For expansion pack batteries */
+#define MICRO_BATT_STATUS_FULL		0x40 /* Battery fully charged */
+#define MICRO_BATT_STATUS_NOBATTERY	0x80
+#define MICRO_BATT_STATUS_UNKNOWN	0xff
+
+struct micro_battery {
+	struct ipaq_micro *micro;
+	struct workqueue_struct *wq;
+	struct delayed_work update;
+	u8 ac;
+	u8 chemistry;
+	unsigned int voltage;
+	u16 temperature;
+	u8 flag;
+};
+
+static void micro_battery_work(struct work_struct *work)
+{
+	struct micro_battery *mb = container_of(work,
+				struct micro_battery, update.work);
+	struct ipaq_micro_msg msg_battery = {
+		.id = MSG_BATTERY,
+	};
+	struct ipaq_micro_msg msg_sensor = {
+		.id = MSG_THERMAL_SENSOR,
+	};
+
+	/* First send battery message */
+	ipaq_micro_tx_msg_sync(mb->micro, &msg_battery);
+	if (msg_battery.rx_len < 4)
+		pr_info("ERROR");
+
+	/*
+	 * Returned message format:
+	 * byte 0:   0x00 = Not plugged in
+	 *           0x01 = AC adapter plugged in
+	 * byte 1:   chemistry
+	 * byte 2:   voltage LSB
+	 * byte 3:   voltage MSB
+	 * byte 4:   flags
+	 * byte 5-9: same for battery 2
+	 */
+	mb->ac = msg_battery.rx_data[0];
+	mb->chemistry = msg_battery.rx_data[1];
+	mb->voltage = ((((unsigned short)msg_battery.rx_data[3] << 8) +
+			msg_battery.rx_data[2]) * 5000L) * 1000 / 1024;
+	mb->flag = msg_battery.rx_data[4];
+
+	if (msg_battery.rx_len == 9)
+		pr_debug("second battery ignored\n");
+
+	/* Then read the sensor */
+	ipaq_micro_tx_msg_sync(mb->micro, &msg_sensor);
+	mb->temperature = msg_sensor.rx_data[1] << 8 | msg_sensor.rx_data[0];
+
+	queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
+}
+
+static int get_capacity(struct power_supply *b)
+{
+	struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+	switch (mb->flag & 0x07) {
+	case MICRO_BATT_STATUS_HIGH:
+		return 100;
+		break;
+	case MICRO_BATT_STATUS_LOW:
+		return 50;
+		break;
+	case MICRO_BATT_STATUS_CRITICAL:
+		return 5;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int get_status(struct power_supply *b)
+{
+	struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+	if (mb->flag == MICRO_BATT_STATUS_UNKNOWN)
+		return POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (mb->flag & MICRO_BATT_STATUS_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	if ((mb->flag & MICRO_BATT_STATUS_CHARGING) ||
+		(mb->flag & MICRO_BATT_STATUS_CHARGEMAIN))
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	return POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int micro_batt_get_property(struct power_supply *b,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		switch (mb->chemistry) {
+		case MICRO_BATT_CHEM_NICD:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd;
+			break;
+		case MICRO_BATT_CHEM_NIMH:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+			break;
+		case MICRO_BATT_CHEM_LION:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+			break;
+		case MICRO_BATT_CHEM_LIPOLY:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+			break;
+		}
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = get_status(b);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 4700000;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = get_capacity(b);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = mb->temperature;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = mb->voltage;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int micro_ac_get_property(struct power_supply *b,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = mb->ac;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property micro_batt_power_props[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static const struct power_supply_desc micro_batt_power_desc = {
+	.name			= "main-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= micro_batt_power_props,
+	.num_properties		= ARRAY_SIZE(micro_batt_power_props),
+	.get_property		= micro_batt_get_property,
+	.use_for_apm		= 1,
+};
+
+static enum power_supply_property micro_ac_power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc micro_ac_power_desc = {
+	.name			= "ac",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.properties		= micro_ac_power_props,
+	.num_properties		= ARRAY_SIZE(micro_ac_power_props),
+	.get_property		= micro_ac_get_property,
+};
+
+static struct power_supply *micro_batt_power, *micro_ac_power;
+
+static int micro_batt_probe(struct platform_device *pdev)
+{
+	struct micro_battery *mb;
+	int ret;
+
+	mb = devm_kzalloc(&pdev->dev, sizeof(*mb), GFP_KERNEL);
+	if (!mb)
+		return -ENOMEM;
+
+	mb->micro = dev_get_drvdata(pdev->dev.parent);
+	mb->wq = alloc_workqueue("ipaq-battery-wq", WQ_MEM_RECLAIM, 0);
+	if (!mb->wq)
+		return -ENOMEM;
+
+	INIT_DELAYED_WORK(&mb->update, micro_battery_work);
+	platform_set_drvdata(pdev, mb);
+	queue_delayed_work(mb->wq, &mb->update, 1);
+
+	micro_batt_power = power_supply_register(&pdev->dev,
+						 &micro_batt_power_desc, NULL);
+	if (IS_ERR(micro_batt_power)) {
+		ret = PTR_ERR(micro_batt_power);
+		goto batt_err;
+	}
+
+	micro_ac_power = power_supply_register(&pdev->dev,
+					       &micro_ac_power_desc, NULL);
+	if (IS_ERR(micro_ac_power)) {
+		ret = PTR_ERR(micro_ac_power);
+		goto ac_err;
+	}
+
+	dev_info(&pdev->dev, "iPAQ micro battery driver\n");
+	return 0;
+
+ac_err:
+	power_supply_unregister(micro_batt_power);
+batt_err:
+	cancel_delayed_work_sync(&mb->update);
+	destroy_workqueue(mb->wq);
+	return ret;
+}
+
+static int micro_batt_remove(struct platform_device *pdev)
+
+{
+	struct micro_battery *mb = platform_get_drvdata(pdev);
+
+	power_supply_unregister(micro_ac_power);
+	power_supply_unregister(micro_batt_power);
+	cancel_delayed_work_sync(&mb->update);
+	destroy_workqueue(mb->wq);
+
+	return 0;
+}
+
+static int __maybe_unused micro_batt_suspend(struct device *dev)
+{
+	struct micro_battery *mb = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&mb->update);
+	return 0;
+}
+
+static int __maybe_unused micro_batt_resume(struct device *dev)
+{
+	struct micro_battery *mb = dev_get_drvdata(dev);
+
+	queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
+	return 0;
+}
+
+static const struct dev_pm_ops micro_batt_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(micro_batt_suspend, micro_batt_resume)
+};
+
+static struct platform_driver micro_batt_device_driver = {
+	.driver		= {
+		.name	= "ipaq-micro-battery",
+		.pm	= &micro_batt_dev_pm_ops,
+	},
+	.probe		= micro_batt_probe,
+	.remove		= micro_batt_remove,
+};
+module_platform_driver(micro_batt_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro battery");
+MODULE_ALIAS("platform:ipaq-micro-battery");
diff --git a/drivers/power/supply/isp1704_charger.c b/drivers/power/supply/isp1704_charger.c
new file mode 100644
index 000000000..b6efc454e
--- /dev/null
+++ b/drivers/power/supply/isp1704_charger.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 - 2013 Pali Rohár <pali@kernel.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Vendor specific Power Control register */
+#define ISP1704_PWR_CTRL		0x3d
+#define ISP1704_PWR_CTRL_SWCTRL		(1 << 0)
+#define ISP1704_PWR_CTRL_DET_COMP	(1 << 1)
+#define ISP1704_PWR_CTRL_BVALID_RISE	(1 << 2)
+#define ISP1704_PWR_CTRL_BVALID_FALL	(1 << 3)
+#define ISP1704_PWR_CTRL_DP_WKPU_EN	(1 << 4)
+#define ISP1704_PWR_CTRL_VDAT_DET	(1 << 5)
+#define ISP1704_PWR_CTRL_DPVSRC_EN	(1 << 6)
+#define ISP1704_PWR_CTRL_HWDETECT	(1 << 7)
+
+#define NXP_VENDOR_ID			0x04cc
+
+static u16 isp170x_id[] = {
+	0x1704,
+	0x1707,
+};
+
+struct isp1704_charger {
+	struct device			*dev;
+	struct power_supply		*psy;
+	struct power_supply_desc	psy_desc;
+	struct gpio_desc		*enable_gpio;
+	struct usb_phy			*phy;
+	struct notifier_block		nb;
+	struct work_struct		work;
+
+	/* properties */
+	char			model[8];
+	unsigned		present:1;
+	unsigned		online:1;
+	unsigned		current_max;
+};
+
+static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
+{
+	return usb_phy_io_read(isp->phy, reg);
+}
+
+static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val)
+{
+	return usb_phy_io_write(isp->phy, val, reg);
+}
+
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+	gpiod_set_value(isp->enable_gpio, on);
+}
+
+/*
+ * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
+ * chargers).
+ *
+ * REVISIT: The method is defined in Battery Charging Specification and is
+ * applicable to any ULPI transceiver. Nothing isp170x specific here.
+ */
+static inline int isp1704_charger_type(struct isp1704_charger *isp)
+{
+	u8 reg;
+	u8 func_ctrl;
+	u8 otg_ctrl;
+	int type = POWER_SUPPLY_TYPE_USB_DCP;
+
+	func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
+	otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
+
+	/* disable pulldowns */
+	reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
+	isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
+
+	/* full speed */
+	isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_XCVRSEL_MASK);
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_FULL_SPEED);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
+	usleep_range(1000, 2000);
+
+	reg = isp1704_read(isp, ULPI_DEBUG);
+	if ((reg & 3) != 3)
+		type = POWER_SUPPLY_TYPE_USB_CDP;
+
+	/* recover original state */
+	isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
+	isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
+
+	return type;
+}
+
+/*
+ * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
+ * is actually a dedicated charger, the following steps need to be taken.
+ */
+static inline int isp1704_charger_verify(struct isp1704_charger *isp)
+{
+	int	ret = 0;
+	u8	r;
+
+	/* Reset the transceiver */
+	r = isp1704_read(isp, ULPI_FUNC_CTRL);
+	r |= ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_FUNC_CTRL, r);
+	usleep_range(1000, 2000);
+
+	/* Set normal mode */
+	r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
+	isp1704_write(isp, ULPI_FUNC_CTRL, r);
+
+	/* Clear the DP and DM pull-down bits */
+	r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
+	isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
+	usleep_range(1000, 2000);
+
+	/* Read the line state */
+	if (!isp1704_read(isp, ULPI_DEBUG)) {
+		/* Disable strong pull-up on DP (1.5K) */
+		isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+				ULPI_FUNC_CTRL_TERMSELECT);
+		return 1;
+	}
+
+	/* Is it a charger or PS/2 connection */
+
+	/* Enable weak pull-up resistor on DP */
+	isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	/* Disable strong pull-up on DP (1.5K) */
+	isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_TERMSELECT);
+
+	/* Enable weak pull-down resistor on DM */
+	isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
+			ULPI_OTG_CTRL_DM_PULLDOWN);
+
+	/* It's a charger if the line states are clear */
+	if (!(isp1704_read(isp, ULPI_DEBUG)))
+		ret = 1;
+
+	/* Disable weak pull-up resistor on DP */
+	isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	return ret;
+}
+
+static inline int isp1704_charger_detect(struct isp1704_charger *isp)
+{
+	unsigned long	timeout;
+	u8		pwr_ctrl;
+	int		ret = 0;
+
+	pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
+
+	/* set SW control bit in PWR_CTRL register */
+	isp1704_write(isp, ISP1704_PWR_CTRL,
+			ISP1704_PWR_CTRL_SWCTRL);
+
+	/* enable manual charger detection */
+	isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_SWCTRL
+			| ISP1704_PWR_CTRL_DPVSRC_EN);
+	usleep_range(1000, 2000);
+
+	timeout = jiffies + msecs_to_jiffies(300);
+	do {
+		/* Check if there is a charger */
+		if (isp1704_read(isp, ISP1704_PWR_CTRL)
+				& ISP1704_PWR_CTRL_VDAT_DET) {
+			ret = isp1704_charger_verify(isp);
+			break;
+		}
+	} while (!time_after(jiffies, timeout) && isp->online);
+
+	/* recover original state */
+	isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
+
+	return ret;
+}
+
+static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp)
+{
+	if (isp1704_charger_detect(isp) &&
+			isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP)
+		return true;
+	else
+		return false;
+}
+
+static void isp1704_charger_work(struct work_struct *data)
+{
+	struct isp1704_charger	*isp =
+		container_of(data, struct isp1704_charger, work);
+	static DEFINE_MUTEX(lock);
+
+	mutex_lock(&lock);
+
+	switch (isp->phy->last_event) {
+	case USB_EVENT_VBUS:
+		/* do not call wall charger detection more times */
+		if (!isp->present) {
+			isp->online = true;
+			isp->present = 1;
+			isp1704_charger_set_power(isp, 1);
+
+			/* detect wall charger */
+			if (isp1704_charger_detect_dcp(isp)) {
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP;
+				isp->current_max = 1800;
+			} else {
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+				isp->current_max = 500;
+			}
+
+			/* enable data pullups */
+			if (isp->phy->otg->gadget)
+				usb_gadget_connect(isp->phy->otg->gadget);
+		}
+
+		if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) {
+			/*
+			 * Only 500mA here or high speed chirp
+			 * handshaking may break
+			 */
+			if (isp->current_max > 500)
+				isp->current_max = 500;
+
+			if (isp->current_max > 100)
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP;
+		}
+		break;
+	case USB_EVENT_NONE:
+		isp->online = false;
+		isp->present = 0;
+		isp->current_max = 0;
+		isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+		/*
+		 * Disable data pullups. We need to prevent the controller from
+		 * enumerating.
+		 *
+		 * FIXME: This is here to allow charger detection with Host/HUB
+		 * chargers. The pullups may be enabled elsewhere, so this can
+		 * not be the final solution.
+		 */
+		if (isp->phy->otg->gadget)
+			usb_gadget_disconnect(isp->phy->otg->gadget);
+
+		isp1704_charger_set_power(isp, 0);
+		break;
+	default:
+		goto out;
+	}
+
+	power_supply_changed(isp->psy);
+out:
+	mutex_unlock(&lock);
+}
+
+static int isp1704_notifier_call(struct notifier_block *nb,
+		unsigned long val, void *v)
+{
+	struct isp1704_charger *isp =
+		container_of(nb, struct isp1704_charger, nb);
+
+	schedule_work(&isp->work);
+
+	return NOTIFY_OK;
+}
+
+static int isp1704_charger_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct isp1704_charger *isp = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = isp->present;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = isp->online;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = isp->current_max;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = isp->model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = "NXP";
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property power_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
+{
+	int vendor;
+	int product;
+	int i;
+	int ret;
+
+	/* Test ULPI interface */
+	ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
+	if (ret < 0)
+		return ret;
+
+	ret = isp1704_read(isp, ULPI_SCRATCH);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 0xaa)
+		return -ENODEV;
+
+	/* Verify the product and vendor id matches */
+	vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
+	vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
+	if (vendor != NXP_VENDOR_ID)
+		return -ENODEV;
+
+	product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
+	product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
+
+	for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
+		if (product == isp170x_id[i]) {
+			sprintf(isp->model, "isp%x", product);
+			return product;
+		}
+	}
+
+	dev_err(isp->dev, "product id %x not matching known ids", product);
+
+	return -ENODEV;
+}
+
+static int isp1704_charger_probe(struct platform_device *pdev)
+{
+	struct isp1704_charger	*isp;
+	int			ret = -ENODEV;
+	struct power_supply_config psy_cfg = {};
+
+	isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->enable_gpio = devm_gpiod_get(&pdev->dev, "nxp,enable",
+					  GPIOD_OUT_HIGH);
+	if (IS_ERR(isp->enable_gpio)) {
+		ret = PTR_ERR(isp->enable_gpio);
+		dev_err(&pdev->dev, "Could not get reset gpio: %d\n", ret);
+		return ret;
+	}
+
+	if (pdev->dev.of_node)
+		isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	else
+		isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(isp->phy)) {
+		ret = PTR_ERR(isp->phy);
+		dev_err(&pdev->dev, "usb_get_phy failed\n");
+		goto fail0;
+	}
+
+	isp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, isp);
+
+	isp1704_charger_set_power(isp, 1);
+
+	ret = isp1704_test_ulpi(isp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "isp1704_test_ulpi failed\n");
+		goto fail1;
+	}
+
+	isp->psy_desc.name		= "isp1704";
+	isp->psy_desc.type		= POWER_SUPPLY_TYPE_USB;
+	isp->psy_desc.properties	= power_props;
+	isp->psy_desc.num_properties	= ARRAY_SIZE(power_props);
+	isp->psy_desc.get_property	= isp1704_charger_get_property;
+
+	psy_cfg.drv_data		= isp;
+
+	isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg);
+	if (IS_ERR(isp->psy)) {
+		ret = PTR_ERR(isp->psy);
+		dev_err(&pdev->dev, "power_supply_register failed\n");
+		goto fail1;
+	}
+
+	/*
+	 * REVISIT: using work in order to allow the usb notifications to be
+	 * made atomically in the future.
+	 */
+	INIT_WORK(&isp->work, isp1704_charger_work);
+
+	isp->nb.notifier_call = isp1704_notifier_call;
+
+	ret = usb_register_notifier(isp->phy, &isp->nb);
+	if (ret) {
+		dev_err(&pdev->dev, "usb_register_notifier failed\n");
+		goto fail2;
+	}
+
+	dev_info(isp->dev, "registered with product id %s\n", isp->model);
+
+	/*
+	 * Taking over the D+ pullup.
+	 *
+	 * FIXME: The device will be disconnected if it was already
+	 * enumerated. The charger driver should be always loaded before any
+	 * gadget is loaded.
+	 */
+	if (isp->phy->otg->gadget)
+		usb_gadget_disconnect(isp->phy->otg->gadget);
+
+	if (isp->phy->last_event == USB_EVENT_NONE)
+		isp1704_charger_set_power(isp, 0);
+
+	/* Detect charger if VBUS is valid (the cable was already plugged). */
+	if (isp->phy->last_event == USB_EVENT_VBUS &&
+			!isp->phy->otg->default_a)
+		schedule_work(&isp->work);
+
+	return 0;
+fail2:
+	power_supply_unregister(isp->psy);
+fail1:
+	isp1704_charger_set_power(isp, 0);
+fail0:
+	dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
+
+	return ret;
+}
+
+static int isp1704_charger_remove(struct platform_device *pdev)
+{
+	struct isp1704_charger *isp = platform_get_drvdata(pdev);
+
+	usb_unregister_notifier(isp->phy, &isp->nb);
+	power_supply_unregister(isp->psy);
+	isp1704_charger_set_power(isp, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_isp1704_of_match[] = {
+	{ .compatible = "nxp,isp1704", },
+	{ .compatible = "nxp,isp1707", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);
+#endif
+
+static struct platform_driver isp1704_charger_driver = {
+	.driver = {
+		.name = "isp1704_charger",
+		.of_match_table = of_match_ptr(omap_isp1704_of_match),
+	},
+	.probe = isp1704_charger_probe,
+	.remove = isp1704_charger_remove,
+};
+
+module_platform_driver(isp1704_charger_driver);
+
+MODULE_ALIAS("platform:isp1704_charger");
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("ISP170x USB Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/lego_ev3_battery.c b/drivers/power/supply/lego_ev3_battery.c
new file mode 100644
index 000000000..ccb00be38
--- /dev/null
+++ b/drivers/power/supply/lego_ev3_battery.c
@@ -0,0 +1,232 @@
+/*
+ * Battery driver for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+struct lego_ev3_battery {
+	struct iio_channel *iio_v;
+	struct iio_channel *iio_i;
+	struct gpio_desc *rechargeable_gpio;
+	struct power_supply *psy;
+	int technology;
+	int v_max;
+	int v_min;
+};
+
+static int lego_ev3_battery_get_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 union power_supply_propval *val)
+{
+	struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+	int ret, val2;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = batt->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* battery voltage is iio channel * 2 + Vce of transistor */
+		ret = iio_read_channel_processed(batt->iio_v, &val->intval);
+		if (ret)
+			return ret;
+
+		val->intval *= 2000;
+		val->intval += 50000;
+
+		/* plus adjust for shunt resistor drop */
+		ret = iio_read_channel_processed(batt->iio_i, &val2);
+		if (ret)
+			return ret;
+
+		val2 *= 1000;
+		val2 /= 15;
+		val->intval += val2;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = batt->v_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = batt->v_min;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		/* battery current is iio channel / 15 / 0.05 ohms */
+		ret = iio_read_channel_processed(batt->iio_i, &val->intval);
+		if (ret)
+			return ret;
+
+		val->intval *= 20000;
+		val->intval /= 15;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lego_ev3_battery_set_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 const union power_supply_propval *val)
+{
+	struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		/*
+		 * Only allow changing technology from Unknown to NiMH. Li-ion
+		 * batteries are automatically detected and should not be
+		 * overridden. Rechargeable AA batteries, on the other hand,
+		 * cannot be automatically detected, and so must be manually
+		 * specified. This should only be set once during system init,
+		 * so there is no mechanism to go back to Unknown.
+		 */
+		if (batt->technology != POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+			return -EINVAL;
+		switch (val->intval) {
+		case POWER_SUPPLY_TECHNOLOGY_NiMH:
+			batt->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
+			batt->v_max = 7800000;
+			batt->v_min = 5400000;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lego_ev3_battery_property_is_writeable(struct power_supply *psy,
+						  enum power_supply_property psp)
+{
+	struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+
+	return psp == POWER_SUPPLY_PROP_TECHNOLOGY &&
+		batt->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+}
+
+static enum power_supply_property lego_ev3_battery_props[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static const struct power_supply_desc lego_ev3_battery_desc = {
+	.name			= "lego-ev3-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= lego_ev3_battery_props,
+	.num_properties		= ARRAY_SIZE(lego_ev3_battery_props),
+	.get_property		= lego_ev3_battery_get_property,
+	.set_property		= lego_ev3_battery_set_property,
+	.property_is_writeable	= lego_ev3_battery_property_is_writeable,
+};
+
+static int lego_ev3_battery_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lego_ev3_battery *batt;
+	struct power_supply_config psy_cfg = {};
+	int err;
+
+	batt = devm_kzalloc(dev, sizeof(*batt), GFP_KERNEL);
+	if (!batt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, batt);
+
+	batt->iio_v = devm_iio_channel_get(dev, "voltage");
+	err = PTR_ERR_OR_ZERO(batt->iio_v);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get voltage iio channel\n");
+
+	batt->iio_i = devm_iio_channel_get(dev, "current");
+	err = PTR_ERR_OR_ZERO(batt->iio_i);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get current iio channel\n");
+
+	batt->rechargeable_gpio = devm_gpiod_get(dev, "rechargeable", GPIOD_IN);
+	err = PTR_ERR_OR_ZERO(batt->rechargeable_gpio);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get rechargeable gpio\n");
+
+	/*
+	 * The rechargeable battery indication switch cannot be changed without
+	 * removing the battery, so we only need to read it once.
+	 */
+	if (gpiod_get_value(batt->rechargeable_gpio)) {
+		/* 2-cell Li-ion, 7.4V nominal */
+		batt->technology = POWER_SUPPLY_TECHNOLOGY_LION;
+		batt->v_max = 84000000;
+		batt->v_min = 60000000;
+	} else {
+		/* 6x AA Alkaline, 9V nominal */
+		batt->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		batt->v_max = 90000000;
+		batt->v_min = 48000000;
+	}
+
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = batt;
+
+	batt->psy = devm_power_supply_register(dev, &lego_ev3_battery_desc,
+					       &psy_cfg);
+	err = PTR_ERR_OR_ZERO(batt->psy);
+	if (err) {
+		dev_err(dev, "failed to register power supply\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_lego_ev3_battery_match[] = {
+	{ .compatible = "lego,ev3-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_lego_ev3_battery_match);
+
+static struct platform_driver lego_ev3_battery_driver = {
+	.driver	= {
+		.name		= "lego-ev3-battery",
+		.of_match_table = of_lego_ev3_battery_match,
+	},
+	.probe	= lego_ev3_battery_probe,
+};
+module_platform_driver(lego_ev3_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("LEGO MINDSTORMS EV3 Battery Driver");
diff --git a/drivers/power/supply/lp8727_charger.c b/drivers/power/supply/lp8727_charger.c
new file mode 100644
index 000000000..384a374b5
--- /dev/null
+++ b/drivers/power/supply/lp8727_charger.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for LP8727 Micro/Mini USB IC with integrated charger
+ *
+ *			Copyright (C) 2011 Texas Instruments
+ *			Copyright (C) 2011 National Semiconductor
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/platform_data/lp8727.h>
+#include <linux/of.h>
+
+#define LP8788_NUM_INTREGS	2
+#define DEFAULT_DEBOUNCE_MSEC	270
+
+/* Registers */
+#define LP8727_CTRL1		0x1
+#define LP8727_CTRL2		0x2
+#define LP8727_SWCTRL		0x3
+#define LP8727_INT1		0x4
+#define LP8727_INT2		0x5
+#define LP8727_STATUS1		0x6
+#define LP8727_STATUS2		0x7
+#define LP8727_CHGCTRL2		0x9
+
+/* CTRL1 register */
+#define LP8727_CP_EN		BIT(0)
+#define LP8727_ADC_EN		BIT(1)
+#define LP8727_ID200_EN		BIT(4)
+
+/* CTRL2 register */
+#define LP8727_CHGDET_EN	BIT(1)
+#define LP8727_INT_EN		BIT(6)
+
+/* SWCTRL register */
+#define LP8727_SW_DM1_DM	(0x0 << 0)
+#define LP8727_SW_DM1_HiZ	(0x7 << 0)
+#define LP8727_SW_DP2_DP	(0x0 << 3)
+#define LP8727_SW_DP2_HiZ	(0x7 << 3)
+
+/* INT1 register */
+#define LP8727_IDNO		(0xF << 0)
+#define LP8727_VBUS		BIT(4)
+
+/* STATUS1 register */
+#define LP8727_CHGSTAT		(3 << 4)
+#define LP8727_CHPORT		BIT(6)
+#define LP8727_DCPORT		BIT(7)
+#define LP8727_STAT_EOC		0x30
+
+/* STATUS2 register */
+#define LP8727_TEMP_STAT	(3 << 5)
+#define LP8727_TEMP_SHIFT	5
+
+/* CHGCTRL2 register */
+#define LP8727_ICHG_SHIFT	4
+
+enum lp8727_dev_id {
+	LP8727_ID_NONE,
+	LP8727_ID_TA,
+	LP8727_ID_DEDICATED_CHG,
+	LP8727_ID_USB_CHG,
+	LP8727_ID_USB_DS,
+	LP8727_ID_MAX,
+};
+
+enum lp8727_die_temp {
+	LP8788_TEMP_75C,
+	LP8788_TEMP_95C,
+	LP8788_TEMP_115C,
+	LP8788_TEMP_135C,
+};
+
+struct lp8727_psy {
+	struct power_supply *ac;
+	struct power_supply *usb;
+	struct power_supply *batt;
+};
+
+struct lp8727_chg {
+	struct device *dev;
+	struct i2c_client *client;
+	struct mutex xfer_lock;
+	struct lp8727_psy *psy;
+	struct lp8727_platform_data *pdata;
+
+	/* Charger Data */
+	enum lp8727_dev_id devid;
+	struct lp8727_chg_param *chg_param;
+
+	/* Interrupt Handling */
+	int irq;
+	struct delayed_work work;
+	unsigned long debounce_jiffies;
+};
+
+static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
+{
+	s32 ret;
+
+	mutex_lock(&pchg->xfer_lock);
+	ret = i2c_smbus_read_i2c_block_data(pchg->client, reg, len, data);
+	mutex_unlock(&pchg->xfer_lock);
+
+	return (ret != len) ? -EIO : 0;
+}
+
+static inline int lp8727_read_byte(struct lp8727_chg *pchg, u8 reg, u8 *data)
+{
+	return lp8727_read_bytes(pchg, reg, data, 1);
+}
+
+static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data)
+{
+	int ret;
+
+	mutex_lock(&pchg->xfer_lock);
+	ret = i2c_smbus_write_byte_data(pchg->client, reg, data);
+	mutex_unlock(&pchg->xfer_lock);
+
+	return ret;
+}
+
+static bool lp8727_is_charger_attached(const char *name, int id)
+{
+	if (!strcmp(name, "ac"))
+		return id == LP8727_ID_TA || id == LP8727_ID_DEDICATED_CHG;
+	else if (!strcmp(name, "usb"))
+		return id == LP8727_ID_USB_CHG;
+
+	return id >= LP8727_ID_TA && id <= LP8727_ID_USB_CHG;
+}
+
+static int lp8727_init_device(struct lp8727_chg *pchg)
+{
+	u8 val;
+	int ret;
+	u8 intstat[LP8788_NUM_INTREGS];
+
+	/* clear interrupts */
+	ret = lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS);
+	if (ret)
+		return ret;
+
+	val = LP8727_ID200_EN | LP8727_ADC_EN | LP8727_CP_EN;
+	ret = lp8727_write_byte(pchg, LP8727_CTRL1, val);
+	if (ret)
+		return ret;
+
+	val = LP8727_INT_EN | LP8727_CHGDET_EN;
+	return lp8727_write_byte(pchg, LP8727_CTRL2, val);
+}
+
+static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg)
+{
+	u8 val;
+
+	lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+	return val & LP8727_DCPORT;
+}
+
+static int lp8727_is_usb_charger(struct lp8727_chg *pchg)
+{
+	u8 val;
+
+	lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+	return val & LP8727_CHPORT;
+}
+
+static inline void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw)
+{
+	lp8727_write_byte(pchg, LP8727_SWCTRL, sw);
+}
+
+static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin)
+{
+	struct lp8727_platform_data *pdata = pchg->pdata;
+	u8 devid = LP8727_ID_NONE;
+	u8 swctrl = LP8727_SW_DM1_HiZ | LP8727_SW_DP2_HiZ;
+
+	switch (id) {
+	case 0x5:
+		devid = LP8727_ID_TA;
+		pchg->chg_param = pdata ? pdata->ac : NULL;
+		break;
+	case 0xB:
+		if (lp8727_is_dedicated_charger(pchg)) {
+			pchg->chg_param = pdata ? pdata->ac : NULL;
+			devid = LP8727_ID_DEDICATED_CHG;
+		} else if (lp8727_is_usb_charger(pchg)) {
+			pchg->chg_param = pdata ? pdata->usb : NULL;
+			devid = LP8727_ID_USB_CHG;
+			swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
+		} else if (vbusin) {
+			devid = LP8727_ID_USB_DS;
+			swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
+		}
+		break;
+	default:
+		devid = LP8727_ID_NONE;
+		pchg->chg_param = NULL;
+		break;
+	}
+
+	pchg->devid = devid;
+	lp8727_ctrl_switch(pchg, swctrl);
+}
+
+static void lp8727_enable_chgdet(struct lp8727_chg *pchg)
+{
+	u8 val;
+
+	lp8727_read_byte(pchg, LP8727_CTRL2, &val);
+	val |= LP8727_CHGDET_EN;
+	lp8727_write_byte(pchg, LP8727_CTRL2, val);
+}
+
+static void lp8727_delayed_func(struct work_struct *_work)
+{
+	struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg,
+						work.work);
+	u8 intstat[LP8788_NUM_INTREGS];
+	u8 idno;
+	u8 vbus;
+
+	if (lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS)) {
+		dev_err(pchg->dev, "can not read INT registers\n");
+		return;
+	}
+
+	idno = intstat[0] & LP8727_IDNO;
+	vbus = intstat[0] & LP8727_VBUS;
+
+	lp8727_id_detection(pchg, idno, vbus);
+	lp8727_enable_chgdet(pchg);
+
+	power_supply_changed(pchg->psy->ac);
+	power_supply_changed(pchg->psy->usb);
+	power_supply_changed(pchg->psy->batt);
+}
+
+static irqreturn_t lp8727_isr_func(int irq, void *ptr)
+{
+	struct lp8727_chg *pchg = ptr;
+
+	schedule_delayed_work(&pchg->work, pchg->debounce_jiffies);
+	return IRQ_HANDLED;
+}
+
+static int lp8727_setup_irq(struct lp8727_chg *pchg)
+{
+	int ret;
+	int irq = pchg->client->irq;
+	unsigned delay_msec = pchg->pdata ? pchg->pdata->debounce_msec :
+						DEFAULT_DEBOUNCE_MSEC;
+
+	INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func);
+
+	if (irq <= 0) {
+		dev_warn(pchg->dev, "invalid irq number: %d\n", irq);
+		return 0;
+	}
+
+	ret = request_threaded_irq(irq,	NULL, lp8727_isr_func,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"lp8727_irq", pchg);
+
+	if (ret)
+		return ret;
+
+	pchg->irq = irq;
+	pchg->debounce_jiffies = msecs_to_jiffies(delay_msec);
+
+	return 0;
+}
+
+static void lp8727_release_irq(struct lp8727_chg *pchg)
+{
+	cancel_delayed_work_sync(&pchg->work);
+
+	if (pchg->irq)
+		free_irq(pchg->irq, pchg);
+}
+
+static enum power_supply_property lp8727_charger_prop[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property lp8727_battery_prop[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static char *battery_supplied_to[] = {
+	"main_batt",
+};
+
+static int lp8727_charger_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+
+	if (psp != POWER_SUPPLY_PROP_ONLINE)
+		return -EINVAL;
+
+	val->intval = lp8727_is_charger_attached(psy->desc->name, pchg->devid);
+
+	return 0;
+}
+
+static bool lp8727_is_high_temperature(enum lp8727_die_temp temp)
+{
+	switch (temp) {
+	case LP8788_TEMP_95C:
+	case LP8788_TEMP_115C:
+	case LP8788_TEMP_135C:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int lp8727_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+	struct lp8727_platform_data *pdata = pchg->pdata;
+	enum lp8727_die_temp temp;
+	u8 read;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!lp8727_is_charger_attached(psy->desc->name, pchg->devid)) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			return 0;
+		}
+
+		lp8727_read_byte(pchg, LP8727_STATUS1, &read);
+
+		val->intval = (read & LP8727_CHGSTAT) == LP8727_STAT_EOC ?
+				POWER_SUPPLY_STATUS_FULL :
+				POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		lp8727_read_byte(pchg, LP8727_STATUS2, &read);
+		temp = (read & LP8727_TEMP_STAT) >> LP8727_TEMP_SHIFT;
+
+		val->intval = lp8727_is_high_temperature(temp) ?
+			POWER_SUPPLY_HEALTH_OVERHEAT :
+			POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_present)
+			val->intval = pdata->get_batt_present();
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_level)
+			val->intval = pdata->get_batt_level();
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_capacity)
+			val->intval = pdata->get_batt_capacity();
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_temp)
+			val->intval = pdata->get_batt_temp();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static void lp8727_charger_changed(struct power_supply *psy)
+{
+	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+	u8 eoc_level;
+	u8 ichg;
+	u8 val;
+
+	/* skip if no charger exists */
+	if (!lp8727_is_charger_attached(psy->desc->name, pchg->devid))
+		return;
+
+	/* update charging parameters */
+	if (pchg->chg_param) {
+		eoc_level = pchg->chg_param->eoc_level;
+		ichg = pchg->chg_param->ichg;
+		val = (ichg << LP8727_ICHG_SHIFT) | eoc_level;
+		lp8727_write_byte(pchg, LP8727_CHGCTRL2, val);
+	}
+}
+
+static const struct power_supply_desc lp8727_ac_desc = {
+	.name			= "ac",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.properties		= lp8727_charger_prop,
+	.num_properties		= ARRAY_SIZE(lp8727_charger_prop),
+	.get_property		= lp8727_charger_get_property,
+};
+
+static const struct power_supply_desc lp8727_usb_desc = {
+	.name			= "usb",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= lp8727_charger_prop,
+	.num_properties		= ARRAY_SIZE(lp8727_charger_prop),
+	.get_property		= lp8727_charger_get_property,
+};
+
+static const struct power_supply_desc lp8727_batt_desc = {
+	.name			= "main_batt",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= lp8727_battery_prop,
+	.num_properties		= ARRAY_SIZE(lp8727_battery_prop),
+	.get_property		= lp8727_battery_get_property,
+	.external_power_changed	= lp8727_charger_changed,
+};
+
+static int lp8727_register_psy(struct lp8727_chg *pchg)
+{
+	struct power_supply_config psy_cfg = {}; /* Only for ac and usb */
+	struct lp8727_psy *psy;
+
+	psy = devm_kzalloc(pchg->dev, sizeof(*psy), GFP_KERNEL);
+	if (!psy)
+		return -ENOMEM;
+
+	pchg->psy = psy;
+
+	psy_cfg.supplied_to = battery_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+	psy->ac = power_supply_register(pchg->dev, &lp8727_ac_desc, &psy_cfg);
+	if (IS_ERR(psy->ac))
+		goto err_psy_ac;
+
+	psy->usb = power_supply_register(pchg->dev, &lp8727_usb_desc,
+					 &psy_cfg);
+	if (IS_ERR(psy->usb))
+		goto err_psy_usb;
+
+	psy->batt = power_supply_register(pchg->dev, &lp8727_batt_desc, NULL);
+	if (IS_ERR(psy->batt))
+		goto err_psy_batt;
+
+	return 0;
+
+err_psy_batt:
+	power_supply_unregister(psy->usb);
+err_psy_usb:
+	power_supply_unregister(psy->ac);
+err_psy_ac:
+	return -EPERM;
+}
+
+static void lp8727_unregister_psy(struct lp8727_chg *pchg)
+{
+	struct lp8727_psy *psy = pchg->psy;
+
+	if (!psy)
+		return;
+
+	power_supply_unregister(psy->ac);
+	power_supply_unregister(psy->usb);
+	power_supply_unregister(psy->batt);
+}
+
+#ifdef CONFIG_OF
+static struct lp8727_chg_param
+*lp8727_parse_charge_pdata(struct device *dev, struct device_node *np)
+{
+	struct lp8727_chg_param *param;
+
+	param = devm_kzalloc(dev, sizeof(*param), GFP_KERNEL);
+	if (!param)
+		goto out;
+
+	of_property_read_u8(np, "eoc-level", (u8 *)&param->eoc_level);
+	of_property_read_u8(np, "charging-current", (u8 *)&param->ichg);
+out:
+	return param;
+}
+
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	struct lp8727_platform_data *pdata;
+	const char *type;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	of_property_read_u32(np, "debounce-ms", &pdata->debounce_msec);
+
+	/* If charging parameter is not defined, just skip parsing the dt */
+	if (of_get_child_count(np) == 0)
+		return pdata;
+
+	for_each_child_of_node(np, child) {
+		of_property_read_string(child, "charger-type", &type);
+
+		if (!strcmp(type, "ac"))
+			pdata->ac = lp8727_parse_charge_pdata(dev, child);
+
+		if (!strcmp(type, "usb"))
+			pdata->usb = lp8727_parse_charge_pdata(dev, child);
+	}
+
+	return pdata;
+}
+#else
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+	struct lp8727_chg *pchg;
+	struct lp8727_platform_data *pdata;
+	int ret;
+
+	if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EIO;
+
+	if (cl->dev.of_node) {
+		pdata = lp8727_parse_dt(&cl->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	} else {
+		pdata = dev_get_platdata(&cl->dev);
+	}
+
+	pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL);
+	if (!pchg)
+		return -ENOMEM;
+
+	pchg->client = cl;
+	pchg->dev = &cl->dev;
+	pchg->pdata = pdata;
+	i2c_set_clientdata(cl, pchg);
+
+	mutex_init(&pchg->xfer_lock);
+
+	ret = lp8727_init_device(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "i2c communication err: %d", ret);
+		return ret;
+	}
+
+	ret = lp8727_register_psy(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "power supplies register err: %d", ret);
+		return ret;
+	}
+
+	ret = lp8727_setup_irq(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "irq handler err: %d", ret);
+		lp8727_unregister_psy(pchg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void lp8727_remove(struct i2c_client *cl)
+{
+	struct lp8727_chg *pchg = i2c_get_clientdata(cl);
+
+	lp8727_release_irq(pchg);
+	lp8727_unregister_psy(pchg);
+}
+
+static const struct of_device_id lp8727_dt_ids[] = {
+	{ .compatible = "ti,lp8727", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lp8727_dt_ids);
+
+static const struct i2c_device_id lp8727_ids[] = {
+	{"lp8727", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp8727_ids);
+
+static struct i2c_driver lp8727_driver = {
+	.driver = {
+		   .name = "lp8727",
+		   .of_match_table = of_match_ptr(lp8727_dt_ids),
+		   },
+	.probe = lp8727_probe,
+	.remove = lp8727_remove,
+	.id_table = lp8727_ids,
+};
+module_i2c_driver(lp8727_driver);
+
+MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
new file mode 100644
index 000000000..56c57529c
--- /dev/null
+++ b/drivers/power/supply/lp8788-charger.c
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI LP8788 MFD - battery charger driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+/* register address */
+#define LP8788_CHG_STATUS		0x07
+#define LP8788_CHG_IDCIN		0x13
+#define LP8788_CHG_IBATT		0x14
+#define LP8788_CHG_VTERM		0x15
+#define LP8788_CHG_EOC			0x16
+
+/* mask/shift bits */
+#define LP8788_CHG_INPUT_STATE_M	0x03	/* Addr 07h */
+#define LP8788_CHG_STATE_M		0x3C
+#define LP8788_CHG_STATE_S		2
+#define LP8788_NO_BATT_M		BIT(6)
+#define LP8788_BAD_BATT_M		BIT(7)
+#define LP8788_CHG_IBATT_M		0x1F	/* Addr 14h */
+#define LP8788_CHG_VTERM_M		0x0F	/* Addr 15h */
+#define LP8788_CHG_EOC_LEVEL_M		0x30	/* Addr 16h */
+#define LP8788_CHG_EOC_LEVEL_S		4
+#define LP8788_CHG_EOC_TIME_M		0x0E
+#define LP8788_CHG_EOC_TIME_S		1
+#define LP8788_CHG_EOC_MODE_M		BIT(0)
+
+#define LP8788_CHARGER_NAME		"charger"
+#define LP8788_BATTERY_NAME		"main_batt"
+
+#define LP8788_CHG_START		0x11
+#define LP8788_CHG_END			0x1C
+
+#define LP8788_ISEL_MAX			23
+#define LP8788_ISEL_STEP		50
+#define LP8788_VTERM_MIN		4100
+#define LP8788_VTERM_STEP		25
+#define LP8788_MAX_BATT_CAPACITY	100
+#define LP8788_MAX_CHG_IRQS		11
+
+enum lp8788_charging_state {
+	LP8788_OFF,
+	LP8788_WARM_UP,
+	LP8788_LOW_INPUT = 0x3,
+	LP8788_PRECHARGE,
+	LP8788_CC,
+	LP8788_CV,
+	LP8788_MAINTENANCE,
+	LP8788_BATTERY_FAULT,
+	LP8788_SYSTEM_SUPPORT = 0xC,
+	LP8788_HIGH_CURRENT = 0xF,
+	LP8788_MAX_CHG_STATE,
+};
+
+enum lp8788_charger_adc_sel {
+	LP8788_VBATT,
+	LP8788_BATT_TEMP,
+	LP8788_NUM_CHG_ADC,
+};
+
+enum lp8788_charger_input_state {
+	LP8788_SYSTEM_SUPPLY = 1,
+	LP8788_FULL_FUNCTION,
+};
+
+/*
+ * struct lp8788_chg_irq
+ * @which        : lp8788 interrupt id
+ * @virq         : Linux IRQ number from irq_domain
+ */
+struct lp8788_chg_irq {
+	enum lp8788_int_id which;
+	int virq;
+};
+
+/*
+ * struct lp8788_charger
+ * @lp           : used for accessing the registers of mfd lp8788 device
+ * @charger      : power supply driver for the battery charger
+ * @battery      : power supply driver for the battery
+ * @charger_work : work queue for charger input interrupts
+ * @chan         : iio channels for getting adc values
+ *                 eg) battery voltage, capacity and temperature
+ * @irqs         : charger dedicated interrupts
+ * @num_irqs     : total numbers of charger interrupts
+ * @pdata        : charger platform specific data
+ */
+struct lp8788_charger {
+	struct lp8788 *lp;
+	struct power_supply *charger;
+	struct power_supply *battery;
+	struct work_struct charger_work;
+	struct iio_channel *chan[LP8788_NUM_CHG_ADC];
+	struct lp8788_chg_irq irqs[LP8788_MAX_CHG_IRQS];
+	int num_irqs;
+	struct lp8788_charger_platform_data *pdata;
+};
+
+static char *battery_supplied_to[] = {
+	LP8788_BATTERY_NAME,
+};
+
+static enum power_supply_property lp8788_charger_prop[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static enum power_supply_property lp8788_battery_prop[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static bool lp8788_is_charger_detected(struct lp8788_charger *pchg)
+{
+	u8 data;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	data &= LP8788_CHG_INPUT_STATE_M;
+
+	return data == LP8788_SYSTEM_SUPPLY || data == LP8788_FULL_FUNCTION;
+}
+
+static int lp8788_charger_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(psy->dev.parent);
+	u8 read;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = lp8788_is_charger_detected(pchg);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		lp8788_read_byte(pchg->lp, LP8788_CHG_IDCIN, &read);
+		val->intval = LP8788_ISEL_STEP *
+				(min_t(int, read, LP8788_ISEL_MAX) + 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_status(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	enum lp8788_charging_state state;
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+	switch (state) {
+	case LP8788_OFF:
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case LP8788_PRECHARGE:
+	case LP8788_CC:
+	case LP8788_CV:
+	case LP8788_HIGH_CURRENT:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case LP8788_MAINTENANCE:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_health(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	if (data & LP8788_NO_BATT_M)
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+	else if (data & LP8788_BAD_BATT_M)
+		val->intval = POWER_SUPPLY_HEALTH_DEAD;
+	else
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+	return 0;
+}
+
+static int lp8788_get_battery_present(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	val->intval = !(data & LP8788_NO_BATT_M);
+	return 0;
+}
+
+static int lp8788_get_vbatt_adc(struct lp8788_charger *pchg, int *result)
+{
+	struct iio_channel *channel = pchg->chan[LP8788_VBATT];
+
+	if (!channel)
+		return -EINVAL;
+
+	return iio_read_channel_processed(channel, result);
+}
+
+static int lp8788_get_battery_voltage(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	return lp8788_get_vbatt_adc(pchg, &val->intval);
+}
+
+static int lp8788_get_battery_capacity(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	struct lp8788 *lp = pchg->lp;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	unsigned int max_vbatt;
+	int vbatt;
+	enum lp8788_charging_state state;
+	u8 data;
+	int ret;
+
+	if (!pdata)
+		return -EINVAL;
+
+	max_vbatt = pdata->max_vbatt_mv;
+	if (max_vbatt == 0)
+		return -EINVAL;
+
+	ret = lp8788_read_byte(lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+	if (state == LP8788_MAINTENANCE) {
+		val->intval = LP8788_MAX_BATT_CAPACITY;
+	} else {
+		ret = lp8788_get_vbatt_adc(pchg, &vbatt);
+		if (ret)
+			return ret;
+
+		val->intval = (vbatt * LP8788_MAX_BATT_CAPACITY) / max_vbatt;
+		val->intval = min(val->intval, LP8788_MAX_BATT_CAPACITY);
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_temperature(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	struct iio_channel *channel = pchg->chan[LP8788_BATT_TEMP];
+	int result;
+	int ret;
+
+	if (!channel)
+		return -EINVAL;
+
+	ret = iio_read_channel_processed(channel, &result);
+	if (ret < 0)
+		return -EINVAL;
+
+	/* unit: 0.1 'C */
+	val->intval = result * 10;
+
+	return 0;
+}
+
+static int lp8788_get_battery_charging_current(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 read;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_IBATT, &read);
+	read &= LP8788_CHG_IBATT_M;
+	val->intval = LP8788_ISEL_STEP *
+			(min_t(int, read, LP8788_ISEL_MAX) + 1);
+
+	return 0;
+}
+
+static int lp8788_get_charging_termination_voltage(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 read;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_VTERM, &read);
+	read &= LP8788_CHG_VTERM_M;
+	val->intval = LP8788_VTERM_MIN + LP8788_VTERM_STEP * read;
+
+	return 0;
+}
+
+static int lp8788_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return lp8788_get_battery_status(pchg, val);
+	case POWER_SUPPLY_PROP_HEALTH:
+		return lp8788_get_battery_health(pchg, val);
+	case POWER_SUPPLY_PROP_PRESENT:
+		return lp8788_get_battery_present(pchg, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return lp8788_get_battery_voltage(pchg, val);
+	case POWER_SUPPLY_PROP_CAPACITY:
+		return lp8788_get_battery_capacity(pchg, val);
+	case POWER_SUPPLY_PROP_TEMP:
+		return lp8788_get_battery_temperature(pchg, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return lp8788_get_battery_charging_current(pchg, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return lp8788_get_charging_termination_voltage(pchg, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static inline bool lp8788_is_valid_charger_register(u8 addr)
+{
+	return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END;
+}
+
+static int lp8788_update_charger_params(struct platform_device *pdev,
+					struct lp8788_charger *pchg)
+{
+	struct lp8788 *lp = pchg->lp;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	struct lp8788_chg_param *param;
+	int i;
+	int ret;
+
+	if (!pdata || !pdata->chg_params) {
+		dev_info(&pdev->dev, "skip updating charger parameters\n");
+		return 0;
+	}
+
+	/* setting charging parameters */
+	for (i = 0; i < pdata->num_chg_params; i++) {
+		param = pdata->chg_params + i;
+
+		if (lp8788_is_valid_charger_register(param->addr)) {
+			ret = lp8788_write_byte(lp, param->addr, param->val);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct power_supply_desc lp8788_psy_charger_desc = {
+	.name		= LP8788_CHARGER_NAME,
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= lp8788_charger_prop,
+	.num_properties	= ARRAY_SIZE(lp8788_charger_prop),
+	.get_property	= lp8788_charger_get_property,
+};
+
+static const struct power_supply_desc lp8788_psy_battery_desc = {
+	.name		= LP8788_BATTERY_NAME,
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= lp8788_battery_prop,
+	.num_properties	= ARRAY_SIZE(lp8788_battery_prop),
+	.get_property	= lp8788_battery_get_property,
+};
+
+static void lp8788_psy_unregister(struct lp8788_charger *pchg)
+{
+	power_supply_unregister(pchg->battery);
+	power_supply_unregister(pchg->charger);
+}
+
+static void lp8788_charger_event(struct work_struct *work)
+{
+	struct lp8788_charger *pchg =
+		container_of(work, struct lp8788_charger, charger_work);
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	enum lp8788_charger_event event = lp8788_is_charger_detected(pchg);
+
+	pdata->charger_event(pchg->lp, event);
+}
+
+static bool lp8788_find_irq_id(struct lp8788_charger *pchg, int virq, int *id)
+{
+	bool found = false;
+	int i;
+
+	for (i = 0; i < pchg->num_irqs; i++) {
+		if (pchg->irqs[i].virq == virq) {
+			*id = pchg->irqs[i].which;
+			found = true;
+			break;
+		}
+	}
+
+	return found;
+}
+
+static irqreturn_t lp8788_charger_irq_thread(int virq, void *ptr)
+{
+	struct lp8788_charger *pchg = ptr;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	int id = -1;
+
+	if (!lp8788_find_irq_id(pchg, virq, &id))
+		return IRQ_NONE;
+
+	switch (id) {
+	case LP8788_INT_CHG_INPUT_STATE:
+	case LP8788_INT_CHG_STATE:
+	case LP8788_INT_EOC:
+	case LP8788_INT_BATT_LOW:
+	case LP8788_INT_NO_BATT:
+		power_supply_changed(pchg->charger);
+		power_supply_changed(pchg->battery);
+		break;
+	default:
+		break;
+	}
+
+	/* report charger dectection event if used */
+	if (!pdata)
+		goto irq_handled;
+
+	if (pdata->charger_event && id == LP8788_INT_CHG_INPUT_STATE)
+		schedule_work(&pchg->charger_work);
+
+irq_handled:
+	return IRQ_HANDLED;
+}
+
+static int lp8788_set_irqs(struct platform_device *pdev,
+			struct lp8788_charger *pchg, const char *name)
+{
+	struct resource *r;
+	struct irq_domain *irqdm = pchg->lp->irqdm;
+	int irq_start;
+	int irq_end;
+	int virq;
+	int nr_irq;
+	int i;
+	int ret;
+
+	/* no error even if no irq resource */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, name);
+	if (!r)
+		return 0;
+
+	irq_start = r->start;
+	irq_end = r->end;
+
+	for (i = irq_start; i <= irq_end; i++) {
+		nr_irq = pchg->num_irqs;
+
+		virq = irq_create_mapping(irqdm, i);
+		pchg->irqs[nr_irq].virq = virq;
+		pchg->irqs[nr_irq].which = i;
+		pchg->num_irqs++;
+
+		ret = request_threaded_irq(virq, NULL,
+					lp8788_charger_irq_thread,
+					IRQF_ONESHOT, name, pchg);
+		if (ret)
+			break;
+	}
+
+	if (i <= irq_end)
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	for (i = 0; i < pchg->num_irqs; i++)
+		free_irq(pchg->irqs[i].virq, pchg);
+	return ret;
+}
+
+static int lp8788_irq_register(struct platform_device *pdev,
+				struct lp8788_charger *pchg)
+{
+	const char *name[] = {
+		LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ
+	};
+	int i;
+	int ret;
+
+	INIT_WORK(&pchg->charger_work, lp8788_charger_event);
+	pchg->num_irqs = 0;
+
+	for (i = 0; i < ARRAY_SIZE(name); i++) {
+		ret = lp8788_set_irqs(pdev, pchg, name[i]);
+		if (ret) {
+			dev_warn(&pdev->dev, "irq setup failed: %s\n", name[i]);
+			return ret;
+		}
+	}
+
+	if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) {
+		dev_err(&pdev->dev, "invalid total number of irqs: %d\n",
+			pchg->num_irqs);
+		return -EINVAL;
+	}
+
+
+	return 0;
+}
+
+static void lp8788_irq_unregister(struct platform_device *pdev,
+				  struct lp8788_charger *pchg)
+{
+	int i;
+	int irq;
+
+	for (i = 0; i < pchg->num_irqs; i++) {
+		irq = pchg->irqs[i].virq;
+		if (!irq)
+			continue;
+
+		free_irq(irq, pchg);
+	}
+}
+
+static void lp8788_setup_adc_channel(struct device *dev,
+				struct lp8788_charger *pchg)
+{
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	struct iio_channel *chan;
+
+	if (!pdata)
+		return;
+
+	/* ADC channel for battery voltage */
+	chan = devm_iio_channel_get(dev, pdata->adc_vbatt);
+	pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
+
+	/* ADC channel for battery temperature */
+	chan = devm_iio_channel_get(dev, pdata->adc_batt_temp);
+	pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
+}
+
+static ssize_t lp8788_show_charger_status(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	enum lp8788_charging_state state;
+	static const char * const desc[LP8788_MAX_CHG_STATE] = {
+		[LP8788_OFF] = "CHARGER OFF",
+		[LP8788_WARM_UP] = "WARM UP",
+		[LP8788_LOW_INPUT] = "LOW INPUT STATE",
+		[LP8788_PRECHARGE] = "CHARGING - PRECHARGE",
+		[LP8788_CC] = "CHARGING - CC",
+		[LP8788_CV] = "CHARGING - CV",
+		[LP8788_MAINTENANCE] = "NO CHARGING - MAINTENANCE",
+		[LP8788_BATTERY_FAULT] = "BATTERY FAULT",
+		[LP8788_SYSTEM_SUPPORT] = "SYSTEM SUPPORT",
+		[LP8788_HIGH_CURRENT] = "HIGH CURRENT",
+	};
+	u8 data;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+	return scnprintf(buf, PAGE_SIZE, "%s\n", desc[state]);
+}
+
+static ssize_t lp8788_show_eoc_time(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	static const char * const stime[] = {
+		"400ms", "5min", "10min", "15min",
+		"20min", "25min", "30min", "No timeout"
+	};
+	u8 val;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+	val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S;
+
+	return scnprintf(buf, PAGE_SIZE, "End Of Charge Time: %s\n",
+			stime[val]);
+}
+
+static ssize_t lp8788_show_eoc_level(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	static const char * const abs_level[] = {
+			"25mA", "49mA", "75mA", "98mA"
+	};
+	static const char * const relative_level[] = {
+			"5%", "10%", "15%", "20%"
+	};
+	const char *level;
+	u8 val;
+	u8 mode;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+
+	mode = val & LP8788_CHG_EOC_MODE_M;
+	val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S;
+	level = mode ? abs_level[val] : relative_level[val];
+
+	return scnprintf(buf, PAGE_SIZE, "End Of Charge Level: %s\n", level);
+}
+
+static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL);
+static DEVICE_ATTR(eoc_time, S_IRUSR, lp8788_show_eoc_time, NULL);
+static DEVICE_ATTR(eoc_level, S_IRUSR, lp8788_show_eoc_level, NULL);
+
+static struct attribute *lp8788_charger_sysfs_attrs[] = {
+	&dev_attr_charger_status.attr,
+	&dev_attr_eoc_time.attr,
+	&dev_attr_eoc_level.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(lp8788_charger_sysfs);
+
+static int lp8788_psy_register(struct platform_device *pdev,
+				struct lp8788_charger *pchg)
+{
+	struct power_supply_config charger_cfg = {};
+
+	charger_cfg.attr_grp = lp8788_charger_sysfs_groups;
+	charger_cfg.supplied_to = battery_supplied_to;
+	charger_cfg.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+	pchg->charger = power_supply_register(&pdev->dev,
+					      &lp8788_psy_charger_desc,
+					      &charger_cfg);
+	if (IS_ERR(pchg->charger))
+		return -EPERM;
+
+	pchg->battery = power_supply_register(&pdev->dev,
+					      &lp8788_psy_battery_desc, NULL);
+	if (IS_ERR(pchg->battery)) {
+		power_supply_unregister(pchg->charger);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+static int lp8788_charger_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	struct lp8788_charger *pchg;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	pchg = devm_kzalloc(dev, sizeof(struct lp8788_charger), GFP_KERNEL);
+	if (!pchg)
+		return -ENOMEM;
+
+	pchg->lp = lp;
+	pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL;
+	platform_set_drvdata(pdev, pchg);
+
+	ret = lp8788_update_charger_params(pdev, pchg);
+	if (ret)
+		return ret;
+
+	lp8788_setup_adc_channel(&pdev->dev, pchg);
+
+	ret = lp8788_psy_register(pdev, pchg);
+	if (ret)
+		return ret;
+
+	ret = lp8788_irq_register(pdev, pchg);
+	if (ret)
+		dev_warn(dev, "failed to register charger irq: %d\n", ret);
+
+	return 0;
+}
+
+static int lp8788_charger_remove(struct platform_device *pdev)
+{
+	struct lp8788_charger *pchg = platform_get_drvdata(pdev);
+
+	flush_work(&pchg->charger_work);
+	lp8788_irq_unregister(pdev, pchg);
+	lp8788_psy_unregister(pchg);
+
+	return 0;
+}
+
+static struct platform_driver lp8788_charger_driver = {
+	.probe = lp8788_charger_probe,
+	.remove = lp8788_charger_remove,
+	.driver = {
+		.name = LP8788_DEV_CHARGER,
+	},
+};
+module_platform_driver(lp8788_charger_driver);
+
+MODULE_DESCRIPTION("TI LP8788 Charger Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-charger");
diff --git a/drivers/power/supply/lt3651-charger.c b/drivers/power/supply/lt3651-charger.c
new file mode 100644
index 000000000..8de500ffa
--- /dev/null
+++ b/drivers/power/supply/lt3651-charger.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Driver for Analog Devices (Linear Technology) LT3651 charger IC.
+ *  Copyright (C) 2017, Topic Embedded Products
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+struct lt3651_charger {
+	struct power_supply *charger;
+	struct power_supply_desc charger_desc;
+	struct gpio_desc *acpr_gpio;
+	struct gpio_desc *fault_gpio;
+	struct gpio_desc *chrg_gpio;
+};
+
+static irqreturn_t lt3651_charger_irq(int irq, void *devid)
+{
+	struct power_supply *charger = devid;
+
+	power_supply_changed(charger);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct lt3651_charger *psy_to_lt3651_charger(
+	struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static int lt3651_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct lt3651_charger *lt3651_charger = psy_to_lt3651_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!lt3651_charger->chrg_gpio) {
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			break;
+		}
+		if (gpiod_get_value(lt3651_charger->chrg_gpio))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = gpiod_get_value(lt3651_charger->acpr_gpio);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (!lt3651_charger->fault_gpio) {
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+			break;
+		}
+		if (!gpiod_get_value(lt3651_charger->fault_gpio)) {
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		}
+		/*
+		 * If the fault pin is active, the chrg pin explains the type
+		 * of failure.
+		 */
+		if (!lt3651_charger->chrg_gpio) {
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+			break;
+		}
+		val->intval = gpiod_get_value(lt3651_charger->chrg_gpio) ?
+				POWER_SUPPLY_HEALTH_OVERHEAT :
+				POWER_SUPPLY_HEALTH_DEAD;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property lt3651_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
+static int lt3651_charger_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct lt3651_charger *lt3651_charger;
+	struct power_supply_desc *charger_desc;
+	int ret;
+
+	lt3651_charger = devm_kzalloc(&pdev->dev, sizeof(*lt3651_charger),
+					GFP_KERNEL);
+	if (!lt3651_charger)
+		return -ENOMEM;
+
+	lt3651_charger->acpr_gpio = devm_gpiod_get(&pdev->dev,
+					"lltc,acpr", GPIOD_IN);
+	if (IS_ERR(lt3651_charger->acpr_gpio)) {
+		ret = PTR_ERR(lt3651_charger->acpr_gpio);
+		dev_err(&pdev->dev, "Failed to acquire acpr GPIO: %d\n", ret);
+		return ret;
+	}
+	lt3651_charger->fault_gpio = devm_gpiod_get_optional(&pdev->dev,
+					"lltc,fault", GPIOD_IN);
+	if (IS_ERR(lt3651_charger->fault_gpio)) {
+		ret = PTR_ERR(lt3651_charger->fault_gpio);
+		dev_err(&pdev->dev, "Failed to acquire fault GPIO: %d\n", ret);
+		return ret;
+	}
+	lt3651_charger->chrg_gpio = devm_gpiod_get_optional(&pdev->dev,
+					"lltc,chrg", GPIOD_IN);
+	if (IS_ERR(lt3651_charger->chrg_gpio)) {
+		ret = PTR_ERR(lt3651_charger->chrg_gpio);
+		dev_err(&pdev->dev, "Failed to acquire chrg GPIO: %d\n", ret);
+		return ret;
+	}
+
+	charger_desc = &lt3651_charger->charger_desc;
+	charger_desc->name = pdev->dev.of_node->name;
+	charger_desc->type = POWER_SUPPLY_TYPE_MAINS;
+	charger_desc->properties = lt3651_charger_properties;
+	charger_desc->num_properties = ARRAY_SIZE(lt3651_charger_properties);
+	charger_desc->get_property = lt3651_charger_get_property;
+	psy_cfg.of_node = pdev->dev.of_node;
+	psy_cfg.drv_data = lt3651_charger;
+
+	lt3651_charger->charger = devm_power_supply_register(&pdev->dev,
+						      charger_desc, &psy_cfg);
+	if (IS_ERR(lt3651_charger->charger)) {
+		ret = PTR_ERR(lt3651_charger->charger);
+		dev_err(&pdev->dev, "Failed to register power supply: %d\n",
+			ret);
+		return ret;
+	}
+
+	/*
+	 * Acquire IRQs for the GPIO pins if possible. If the system does not
+	 * support IRQs on these pins, userspace will have to poll the sysfs
+	 * files manually.
+	 */
+	if (lt3651_charger->acpr_gpio) {
+		ret = gpiod_to_irq(lt3651_charger->acpr_gpio);
+		if (ret >= 0)
+			ret = devm_request_any_context_irq(&pdev->dev, ret,
+				lt3651_charger_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				dev_name(&pdev->dev), lt3651_charger->charger);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "Failed to request acpr irq\n");
+	}
+	if (lt3651_charger->fault_gpio) {
+		ret = gpiod_to_irq(lt3651_charger->fault_gpio);
+		if (ret >= 0)
+			ret = devm_request_any_context_irq(&pdev->dev, ret,
+				lt3651_charger_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				dev_name(&pdev->dev), lt3651_charger->charger);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "Failed to request fault irq\n");
+	}
+	if (lt3651_charger->chrg_gpio) {
+		ret = gpiod_to_irq(lt3651_charger->chrg_gpio);
+		if (ret >= 0)
+			ret = devm_request_any_context_irq(&pdev->dev, ret,
+				lt3651_charger_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				dev_name(&pdev->dev), lt3651_charger->charger);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "Failed to request chrg irq\n");
+	}
+
+	platform_set_drvdata(pdev, lt3651_charger);
+
+	return 0;
+}
+
+static const struct of_device_id lt3651_charger_match[] = {
+	{ .compatible = "lltc,ltc3651-charger" }, /* DEPRECATED */
+	{ .compatible = "lltc,lt3651-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lt3651_charger_match);
+
+static struct platform_driver lt3651_charger_driver = {
+	.probe = lt3651_charger_probe,
+	.driver = {
+		.name = "lt3651-charger",
+		.of_match_table = lt3651_charger_match,
+	},
+};
+
+module_platform_driver(lt3651_charger_driver);
+
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
+MODULE_DESCRIPTION("Driver for LT3651 charger");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lt3651-charger");
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
new file mode 100644
index 000000000..657305214
--- /dev/null
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C client/driver for the Linear Technology LTC2941, LTC2942, LTC2943
+ * and LTC2944 Battery Gas Gauge IC
+ *
+ * Copyright (C) 2014 Topic Embedded Systems
+ *
+ * Author: Auryn Verwegen
+ * Author: Mike Looijmans
+ */
+#include <linux/devm-helpers.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define I16_MSB(x)			((x >> 8) & 0xFF)
+#define I16_LSB(x)			(x & 0xFF)
+
+#define LTC294X_WORK_DELAY		10	/* Update delay in seconds */
+
+#define LTC294X_MAX_VALUE		0xFFFF
+#define LTC294X_MID_SUPPLY		0x7FFF
+
+#define LTC2941_MAX_PRESCALER_EXP	7
+#define LTC2943_MAX_PRESCALER_EXP	6
+
+enum ltc294x_reg {
+	LTC294X_REG_STATUS		= 0x00,
+	LTC294X_REG_CONTROL		= 0x01,
+	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
+	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
+	LTC294X_REG_CHARGE_THR_HIGH_MSB	= 0x04,
+	LTC294X_REG_CHARGE_THR_HIGH_LSB	= 0x05,
+	LTC294X_REG_CHARGE_THR_LOW_MSB	= 0x06,
+	LTC294X_REG_CHARGE_THR_LOW_LSB	= 0x07,
+	LTC294X_REG_VOLTAGE_MSB		= 0x08,
+	LTC294X_REG_VOLTAGE_LSB		= 0x09,
+	LTC2942_REG_TEMPERATURE_MSB	= 0x0C,
+	LTC2942_REG_TEMPERATURE_LSB	= 0x0D,
+	LTC2943_REG_CURRENT_MSB		= 0x0E,
+	LTC2943_REG_CURRENT_LSB		= 0x0F,
+	LTC2943_REG_TEMPERATURE_MSB	= 0x14,
+	LTC2943_REG_TEMPERATURE_LSB	= 0x15,
+};
+
+enum ltc294x_id {
+	LTC2941_ID,
+	LTC2942_ID,
+	LTC2943_ID,
+	LTC2944_ID,
+};
+
+#define LTC2941_REG_STATUS_CHIP_ID	BIT(7)
+
+#define LTC2942_REG_CONTROL_MODE_SCAN	(BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN	BIT(7)
+#define LTC294X_REG_CONTROL_PRESCALER_MASK	(BIT(5) | BIT(4) | BIT(3))
+#define LTC294X_REG_CONTROL_SHUTDOWN_MASK	(BIT(0))
+#define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
+	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
+#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
+#define LTC294X_REG_CONTROL_ADC_DISABLE(x)	((x) & ~(BIT(7) | BIT(6)))
+
+struct ltc294x_info {
+	struct i2c_client *client;	/* I2C Client pointer */
+	struct power_supply *supply;	/* Supply pointer */
+	struct power_supply_desc supply_desc;	/* Supply description */
+	struct delayed_work work;	/* Work scheduler */
+	enum ltc294x_id id;		/* Chip type */
+	int charge;	/* Last charge register content */
+	int r_sense;	/* mOhm */
+	int Qlsb;	/* nAh */
+};
+
+static inline int convert_bin_to_uAh(
+	const struct ltc294x_info *info, int Q)
+{
+	return ((Q * (info->Qlsb / 10))) / 100;
+}
+
+static inline int convert_uAh_to_bin(
+	const struct ltc294x_info *info, int uAh)
+{
+	int Q;
+
+	Q = (uAh * 100) / (info->Qlsb/10);
+	return (Q < LTC294X_MAX_VALUE) ? Q : LTC294X_MAX_VALUE;
+}
+
+static int ltc294x_read_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, u8 *buf, int num_regs)
+{
+	int ret;
+	struct i2c_msg msgs[2] = { };
+	u8 reg_start = reg;
+
+	msgs[0].addr	= client->addr;
+	msgs[0].len	= 1;
+	msgs[0].buf	= &reg_start;
+
+	msgs[1].addr	= client->addr;
+	msgs[1].len	= num_regs;
+	msgs[1].buf	= buf;
+	msgs[1].flags	= I2C_M_RD;
+
+	ret = i2c_transfer(client->adapter, &msgs[0], 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 read_reg(0x%x[%d]) failed: %pe\n",
+			reg, num_regs, ERR_PTR(ret));
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_write_regs(struct i2c_client *client,
+	enum ltc294x_reg reg, const u8 *buf, int num_regs)
+{
+	int ret;
+	u8 reg_start = reg;
+
+	ret = i2c_smbus_write_i2c_block_data(client, reg_start, num_regs, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "ltc2941 write_reg(0x%x[%d]) failed: %pe\n",
+			reg, num_regs, ERR_PTR(ret));
+		return ret;
+	}
+
+	dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+		__func__, reg, num_regs, *buf);
+
+	return 0;
+}
+
+static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
+{
+	int ret;
+	u8 value;
+	u8 control;
+
+	/* Read status and control registers */
+	ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+	if (ret < 0)
+		return ret;
+
+	control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
+				LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
+	/* Put device into "monitor" mode */
+	switch (info->id) {
+	case LTC2942_ID:	/* 2942 measures every 2 sec */
+		control |= LTC2942_REG_CONTROL_MODE_SCAN;
+		break;
+	case LTC2943_ID:
+	case LTC2944_ID:	/* 2943 and 2944 measure every 10 sec */
+		control |= LTC2943_REG_CONTROL_MODE_SCAN;
+		break;
+	default:
+		break;
+	}
+
+	if (value != control) {
+		ret = ltc294x_write_regs(info->client,
+			LTC294X_REG_CONTROL, &control, 1);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int ltc294x_read_charge_register(const struct ltc294x_info *info,
+					enum ltc294x_reg reg)
+ {
+	int ret;
+	u8 datar[2];
+
+	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+	if (ret < 0)
+		return ret;
+	return (datar[0] << 8) + datar[1];
+}
+
+static int ltc294x_get_charge(const struct ltc294x_info *info,
+				enum ltc294x_reg reg, int *val)
+{
+	int value = ltc294x_read_charge_register(info, reg);
+
+	if (value < 0)
+		return value;
+	/* When r_sense < 0, this counts up when the battery discharges */
+	if (info->Qlsb < 0)
+		value -= 0xFFFF;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_set_charge_now(const struct ltc294x_info *info, int val)
+{
+	int ret;
+	u8 dataw[2];
+	u8 ctrl_reg;
+	s32 value;
+
+	value = convert_uAh_to_bin(info, val);
+	/* Direction depends on how sense+/- were connected */
+	if (info->Qlsb < 0)
+		value += 0xFFFF;
+	if ((value < 0) || (value > 0xFFFF)) /* input validation */
+		return -EINVAL;
+
+	/* Read control register */
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Disable analog section */
+	ctrl_reg |= LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+	if (ret < 0)
+		return ret;
+	/* Set new charge value */
+	dataw[0] = I16_MSB(value);
+	dataw[1] = I16_LSB(value);
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_ACC_CHARGE_MSB, &dataw[0], 2);
+	if (ret < 0)
+		goto error_exit;
+	/* Enable analog section */
+error_exit:
+	ctrl_reg &= ~LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+	ret = ltc294x_write_regs(info->client,
+		LTC294X_REG_CONTROL, &ctrl_reg, 1);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int ltc294x_set_charge_thr(const struct ltc294x_info *info,
+					enum ltc294x_reg reg, int val)
+{
+	u8 dataw[2];
+	s32 value;
+
+	value = convert_uAh_to_bin(info, val);
+	/* Direction depends on how sense+/- were connected */
+	if (info->Qlsb < 0)
+		value += 0xFFFF;
+	if ((value < 0) || (value > 0xFFFF)) /* input validation */
+		return -EINVAL;
+
+	/* Set new charge value */
+	dataw[0] = I16_MSB(value);
+	dataw[1] = I16_LSB(value);
+	return ltc294x_write_regs(info->client, reg, &dataw[0], 2);
+}
+
+static int ltc294x_get_charge_counter(
+	const struct ltc294x_info *info, int *val)
+{
+	int value = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
+
+	if (value < 0)
+		return value;
+	value -= LTC294X_MID_SUPPLY;
+	*val = convert_bin_to_uAh(info, value);
+	return 0;
+}
+
+static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	switch (info->id) {
+	case LTC2943_ID:
+		value *= 23600 * 2;
+		value /= 0xFFFF;
+		value *= 1000 / 2;
+		break;
+	case LTC2944_ID:
+		value *= 70800 / 5*4;
+		value /= 0xFFFF;
+		value *= 1000 * 5/4;
+		break;
+	default:
+		value *= 6000 * 10;
+		value /= 0xFFFF;
+		value *= 1000 / 10;
+		break;
+	}
+	*val = value;
+	return ret;
+}
+
+static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
+{
+	int ret;
+	u8 datar[2];
+	s32 value;
+
+	ret = ltc294x_read_regs(info->client,
+		LTC2943_REG_CURRENT_MSB, &datar[0], 2);
+	value = (datar[0] << 8) | datar[1];
+	value -= 0x7FFF;
+	if (info->id == LTC2944_ID)
+		value *= 64000;
+	else
+		value *= 60000;
+	/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
+	 * the formula below keeps everything in s32 range while preserving
+	 * enough digits */
+	*val = 1000 * (value / (info->r_sense * 0x7FFF)); /* in uA */
+	return ret;
+}
+
+static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
+{
+	enum ltc294x_reg reg;
+	int ret;
+	u8 datar[2];
+	u32 value;
+
+	if (info->id == LTC2942_ID) {
+		reg = LTC2942_REG_TEMPERATURE_MSB;
+		value = 6000;	/* Full-scale is 600 Kelvin */
+	} else {
+		reg = LTC2943_REG_TEMPERATURE_MSB;
+		value = 5100;	/* Full-scale is 510 Kelvin */
+	}
+	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+	value *= (datar[0] << 8) | datar[1];
+	/* Convert to tenths of degree Celsius */
+	*val = value / 0xFFFF - 2722;
+	return ret;
+}
+
+static int ltc294x_get_property(struct power_supply *psy,
+				enum power_supply_property prop,
+				union power_supply_propval *val)
+{
+	struct ltc294x_info *info = power_supply_get_drvdata(psy);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_HIGH_MSB,
+						&val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_LOW_MSB,
+						&val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_get_charge(info, LTC294X_REG_ACC_CHARGE_MSB,
+						&val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		return ltc294x_get_charge_counter(info, &val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ltc294x_get_voltage(info, &val->intval);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ltc294x_get_current(info, &val->intval);
+	case POWER_SUPPLY_PROP_TEMP:
+		return ltc294x_get_temperature(info, &val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc294x_set_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	const union power_supply_propval *val)
+{
+	struct ltc294x_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		return ltc294x_set_charge_thr(info,
+			LTC294X_REG_CHARGE_THR_HIGH_MSB, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		return ltc294x_set_charge_thr(info,
+			LTC294X_REG_CHARGE_THR_LOW_MSB, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ltc294x_set_charge_now(info, val->intval);
+	default:
+		return -EPERM;
+	}
+}
+
+static int ltc294x_property_is_writeable(
+	struct power_supply *psy, enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static void ltc294x_update(struct ltc294x_info *info)
+{
+	int charge = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
+
+	if (charge != info->charge) {
+		info->charge = charge;
+		power_supply_changed(info->supply);
+	}
+}
+
+static void ltc294x_work(struct work_struct *work)
+{
+	struct ltc294x_info *info;
+
+	info = container_of(work, struct ltc294x_info, work.work);
+	ltc294x_update(info);
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+}
+
+static enum power_supply_property ltc294x_properties[] = {
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int ltc294x_i2c_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct power_supply_config psy_cfg = {};
+	struct ltc294x_info *info;
+	struct device_node *np;
+	int ret;
+	u32 prescaler_exp;
+	s32 r_sense;
+	u8 status;
+
+	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+	if (info == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, info);
+
+	np = of_node_get(client->dev.of_node);
+
+	info->id = (enum ltc294x_id) (uintptr_t) of_device_get_match_data(
+							&client->dev);
+	info->supply_desc.name = np->name;
+
+	/* r_sense can be negative, when sense+ is connected to the battery
+	 * instead of the sense-. This results in reversed measurements. */
+	ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+			"Could not find lltc,resistor-sense in devicetree\n");
+	info->r_sense = r_sense;
+
+	ret = of_property_read_u32(np, "lltc,prescaler-exponent",
+		&prescaler_exp);
+	if (ret < 0) {
+		dev_warn(&client->dev,
+			"lltc,prescaler-exponent not in devicetree\n");
+		prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+	}
+
+	if (info->id == LTC2943_ID) {
+		if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
+		info->Qlsb = ((340 * 50000) / r_sense) >>
+			     (12 - 2*prescaler_exp);
+	} else {
+		if (prescaler_exp > LTC2941_MAX_PRESCALER_EXP)
+			prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+		info->Qlsb = ((85 * 50000) / r_sense) >>
+			     (7 - prescaler_exp);
+	}
+
+	/* Read status register to check for LTC2942 */
+	if (info->id == LTC2941_ID || info->id == LTC2942_ID) {
+		ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1);
+		if (ret < 0)
+			return dev_err_probe(&client->dev, ret,
+				"Could not read status register\n");
+		if (status & LTC2941_REG_STATUS_CHIP_ID)
+			info->id = LTC2941_ID;
+		else
+			info->id = LTC2942_ID;
+	}
+
+	info->client = client;
+	info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->supply_desc.properties = ltc294x_properties;
+	switch (info->id) {
+	case LTC2944_ID:
+	case LTC2943_ID:
+		info->supply_desc.num_properties =
+			ARRAY_SIZE(ltc294x_properties);
+		break;
+	case LTC2942_ID:
+		info->supply_desc.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 1;
+		break;
+	case LTC2941_ID:
+	default:
+		info->supply_desc.num_properties =
+			ARRAY_SIZE(ltc294x_properties) - 3;
+		break;
+	}
+	info->supply_desc.get_property = ltc294x_get_property;
+	info->supply_desc.set_property = ltc294x_set_property;
+	info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
+	info->supply_desc.external_power_changed	= NULL;
+
+	psy_cfg.drv_data = info;
+
+	ret = devm_delayed_work_autocancel(&client->dev, &info->work,
+					   ltc294x_work);
+	if (ret)
+		return ret;
+
+	ret = ltc294x_reset(info, prescaler_exp);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+			"Communication with chip failed\n");
+
+	info->supply = devm_power_supply_register(&client->dev,
+						  &info->supply_desc, &psy_cfg);
+	if (IS_ERR(info->supply))
+		return dev_err_probe(&client->dev, PTR_ERR(info->supply),
+			"failed to register ltc2941\n");
+
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+
+	return 0;
+}
+
+static void ltc294x_i2c_shutdown(struct i2c_client *client)
+{
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+	int ret;
+	u8 value;
+	u8 control;
+
+	/* The LTC2941 does not need any special handling */
+	if (info->id == LTC2941_ID)
+		return;
+
+	/* Read control register */
+	ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+	if (ret < 0)
+		return;
+
+	/* Disable continuous ADC conversion as this drains the battery */
+	control = LTC294X_REG_CONTROL_ADC_DISABLE(value);
+	if (control != value)
+		ltc294x_write_regs(info->client, LTC294X_REG_CONTROL,
+			&control, 1);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ltc294x_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	cancel_delayed_work(&info->work);
+	return 0;
+}
+
+static int ltc294x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc294x_info *info = i2c_get_clientdata(client);
+
+	schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
+#define LTC294X_PM_OPS (&ltc294x_pm_ops)
+
+#else
+#define LTC294X_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+
+static const struct i2c_device_id ltc294x_i2c_id[] = {
+	{ "ltc2941", LTC2941_ID, },
+	{ "ltc2942", LTC2942_ID, },
+	{ "ltc2943", LTC2943_ID, },
+	{ "ltc2944", LTC2944_ID, },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
+
+static const struct of_device_id ltc294x_i2c_of_match[] = {
+	{
+		.compatible = "lltc,ltc2941",
+		.data = (void *)LTC2941_ID,
+	},
+	{
+		.compatible = "lltc,ltc2942",
+		.data = (void *)LTC2942_ID,
+	},
+	{
+		.compatible = "lltc,ltc2943",
+		.data = (void *)LTC2943_ID,
+	},
+	{
+		.compatible = "lltc,ltc2944",
+		.data = (void *)LTC2944_ID,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ltc294x_i2c_of_match);
+
+static struct i2c_driver ltc294x_driver = {
+	.driver = {
+		.name	= "LTC2941",
+		.of_match_table = ltc294x_i2c_of_match,
+		.pm	= LTC294X_PM_OPS,
+	},
+	.probe		= ltc294x_i2c_probe,
+	.shutdown	= ltc294x_i2c_shutdown,
+	.id_table	= ltc294x_i2c_id,
+};
+module_i2c_driver(ltc294x_driver);
+
+MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
+MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
+MODULE_DESCRIPTION("LTC2941/LTC2942/LTC2943/LTC2944 Battery Gas Gauge IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ltc4162-l-charger.c b/drivers/power/supply/ltc4162-l-charger.c
new file mode 100644
index 000000000..1a5cb4405
--- /dev/null
+++ b/drivers/power/supply/ltc4162-l-charger.c
@@ -0,0 +1,931 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Driver for Analog Devices (Linear Technology) LTC4162-L charger IC.
+ *  Copyright (C) 2020, Topic Embedded Products
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+/* Registers (names based on what datasheet uses) */
+#define LTC4162L_EN_LIMIT_ALERTS_REG		0x0D
+#define LTC4162L_EN_CHARGER_STATE_ALERTS_REG	0x0E
+#define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG	0x0F
+#define LTC4162L_CONFIG_BITS_REG		0x14
+#define LTC4162L_IIN_LIMIT_TARGET		0x15
+#define LTC4162L_ARM_SHIP_MODE			0x19
+#define LTC4162L_CHARGE_CURRENT_SETTING		0X1A
+#define LTC4162L_VCHARGE_SETTING		0X1B
+#define LTC4162L_C_OVER_X_THRESHOLD		0x1C
+#define LTC4162L_MAX_CV_TIME			0X1D
+#define LTC4162L_MAX_CHARGE_TIME		0X1E
+#define LTC4162L_CHARGER_CONFIG_BITS		0x29
+#define LTC4162L_CHARGER_STATE			0x34
+#define LTC4162L_CHARGE_STATUS			0x35
+#define LTC4162L_LIMIT_ALERTS_REG		0x36
+#define LTC4162L_CHARGER_STATE_ALERTS_REG	0x37
+#define LTC4162L_CHARGE_STATUS_ALERTS_REG	0x38
+#define LTC4162L_SYSTEM_STATUS_REG		0x39
+#define LTC4162L_VBAT				0x3A
+#define LTC4162L_VIN				0x3B
+#define LTC4162L_VOUT				0x3C
+#define LTC4162L_IBAT				0x3D
+#define LTC4162L_IIN				0x3E
+#define LTC4162L_DIE_TEMPERATURE		0x3F
+#define LTC4162L_THERMISTOR_VOLTAGE		0x40
+#define LTC4162L_BSR				0x41
+#define LTC4162L_JEITA_REGION			0x42
+#define LTC4162L_CHEM_CELLS_REG			0x43
+#define LTC4162L_ICHARGE_DAC			0x44
+#define LTC4162L_VCHARGE_DAC			0x45
+#define LTC4162L_IIN_LIMIT_DAC			0x46
+#define LTC4162L_VBAT_FILT			0x47
+#define LTC4162L_INPUT_UNDERVOLTAGE_DAC		0x4B
+
+/* Enumeration as in datasheet. Individual bits are mutually exclusive. */
+enum ltc4162l_state {
+	battery_detection = 2048,
+	charger_suspended = 256,
+	precharge = 128,   /* trickle on low bat voltage */
+	cc_cv_charge = 64, /* normal charge */
+	ntc_pause = 32,
+	timer_term = 16,
+	c_over_x_term = 8, /* battery is full */
+	max_charge_time_fault = 4,
+	bat_missing_fault = 2,
+	bat_short_fault = 1
+};
+
+/* Individual bits are mutually exclusive. Only active in charging states.*/
+enum ltc4162l_charge_status {
+	ilim_reg_active = 32,
+	thermal_reg_active = 16,
+	vin_uvcl_active = 8,
+	iin_limit_active = 4,
+	constant_current = 2,
+	constant_voltage = 1,
+	charger_off = 0
+};
+
+/* Magic number to write to ARM_SHIP_MODE register */
+#define LTC4162L_ARM_SHIP_MODE_MAGIC 21325
+
+struct ltc4162l_info {
+	struct i2c_client	*client;
+	struct regmap		*regmap;
+	struct power_supply	*charger;
+	u32 rsnsb;	/* Series resistor that sets charge current, microOhm */
+	u32 rsnsi;	/* Series resistor to measure input current, microOhm */
+	u8 cell_count;	/* Number of connected cells, 0 while unknown */
+};
+
+static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info)
+{
+	int ret;
+	unsigned int val;
+
+	/* Once read successfully */
+	if (info->cell_count)
+		return info->cell_count;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val);
+	if (ret)
+		return 0;
+
+	/* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */
+	val &= 0x0f;
+	if (!val)
+		return 0;
+
+	/* Once determined, keep the value */
+	info->cell_count = val;
+
+	return val;
+};
+
+/* Convert enum value to POWER_SUPPLY_STATUS value */
+static int ltc4162l_state_decode(enum ltc4162l_state value)
+{
+	switch (value) {
+	case precharge:
+	case cc_cv_charge:
+		return POWER_SUPPLY_STATUS_CHARGING;
+	case c_over_x_term:
+		return POWER_SUPPLY_STATUS_FULL;
+	case bat_missing_fault:
+	case bat_short_fault:
+		return POWER_SUPPLY_STATUS_UNKNOWN;
+	default:
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+};
+
+static int ltc4162l_get_status(struct ltc4162l_info *info,
+			       union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n");
+		return ret;
+	}
+
+	val->intval = ltc4162l_state_decode(regval);
+
+	return 0;
+}
+
+static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value)
+{
+	if (!value)
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+
+	/* constant voltage/current and input_current limit are "fast" modes */
+	if (value <= iin_limit_active)
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+
+	/* Anything that's not fast we'll return as trickle */
+	return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+}
+
+static int ltc4162l_get_charge_type(struct ltc4162l_info *info,
+				    union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
+	if (ret)
+		return ret;
+
+	val->intval = ltc4162l_charge_status_decode(regval);
+
+	return 0;
+}
+
+static int ltc4162l_state_to_health(enum ltc4162l_state value)
+{
+	switch (value) {
+	case ntc_pause:
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+	case timer_term:
+		return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+	case max_charge_time_fault:
+		return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
+	case bat_missing_fault:
+		return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+	case bat_short_fault:
+		return POWER_SUPPLY_HEALTH_DEAD;
+	default:
+		return POWER_SUPPLY_HEALTH_GOOD;
+	}
+}
+
+static int ltc4162l_get_health(struct ltc4162l_info *info,
+			       union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
+	if (ret)
+		return ret;
+
+	val->intval = ltc4162l_state_to_health(regval);
+
+	return 0;
+}
+
+static int ltc4162l_get_online(struct ltc4162l_info *info,
+			       union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, &regval);
+	if (ret)
+		return ret;
+
+	/* BIT(2) indicates if input voltage is sufficient to charge */
+	val->intval = !!(regval & BIT(2));
+
+	return 0;
+}
+
+static int ltc4162l_get_vbat(struct ltc4162l_info *info,
+				  unsigned int reg,
+				  union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	/* cell_count × 192.4μV/LSB */
+	regval *= 1924;
+	regval *= ltc4162l_get_cell_count(info);
+	regval /= 10;
+	val->intval = regval;
+
+	return 0;
+}
+
+static int ltc4162l_get_ibat(struct ltc4162l_info *info,
+			     union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_IBAT, &regval);
+	if (ret)
+		return ret;
+
+	/* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */
+	ret = (s16)(regval & 0xFFFF);
+	val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb);
+
+	return 0;
+}
+
+
+static int ltc4162l_get_input_voltage(struct ltc4162l_info *info,
+				      union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_VIN, &regval);
+	if (ret)
+		return ret;
+
+	/* 1.649mV/LSB */
+	val->intval =  regval * 1694;
+
+	return 0;
+}
+
+static int ltc4162l_get_input_current(struct ltc4162l_info *info,
+				      union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_IIN, &regval);
+	if (ret)
+		return ret;
+
+	/* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */
+	ret = (s16)(regval & 0xFFFF);
+	ret *= 14660;
+	ret /= info->rsnsi;
+	ret *= 100;
+
+	val->intval = ret;
+
+	return 0;
+}
+
+static int ltc4162l_get_icharge(struct ltc4162l_info *info,
+				unsigned int reg,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	regval &= BIT(6) - 1; /* Only the lower 5 bits */
+
+	/* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */
+	++regval;
+	val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb);
+
+	return 0;
+}
+
+static int ltc4162l_set_icharge(struct ltc4162l_info *info,
+				unsigned int reg,
+				unsigned int value)
+{
+	value = mult_frac(value, info->rsnsb, 100000u);
+	value /= 10000u;
+
+	/* Round to lowest possible */
+	if (value)
+		--value;
+
+	if (value > 31)
+		return -EINVAL;
+
+	return regmap_write(info->regmap, reg, value);
+}
+
+
+static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
+				unsigned int reg,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+	u32 voltage;
+
+	ret = regmap_read(info->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	regval &= BIT(6) - 1; /* Only the lower 5 bits */
+
+	/*
+	 * charge voltage setting can be computed from
+	 * cell_count × (vcharge_setting × 12.5mV + 3.8125V)
+	 * where vcharge_setting ranges from 0 to 31 (4.2V max).
+	 */
+	voltage = 3812500 + (regval * 12500);
+	voltage *= ltc4162l_get_cell_count(info);
+	val->intval = voltage;
+
+	return 0;
+}
+
+static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
+				unsigned int reg,
+				unsigned int value)
+{
+	u8 cell_count = ltc4162l_get_cell_count(info);
+
+	if (!cell_count)
+		return -EBUSY; /* Not available yet, try again later */
+
+	value /= cell_count;
+
+	if (value < 3812500)
+		return -EINVAL;
+
+	value -= 3812500;
+	value /= 12500;
+
+	if (value > 31)
+		return -EINVAL;
+
+	return regmap_write(info->regmap, reg, value);
+}
+
+static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info,
+				     union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, &regval);
+	if (ret)
+		return ret;
+
+	regval &= BIT(6) - 1; /* Only 6 bits */
+
+	/* (iin_limit_dac + 1) × 500μV / RSNSI */
+	++regval;
+	regval *= 5000000u;
+	regval /= info->rsnsi;
+	val->intval = 100u * regval;
+
+	return 0;
+}
+
+static int ltc4162l_set_iin_limit(struct ltc4162l_info *info,
+				  unsigned int value)
+{
+	unsigned int regval;
+
+	regval = mult_frac(value, info->rsnsi, 50000u);
+	regval /= 10000u;
+	if (regval)
+		--regval;
+	if (regval > 63)
+		regval = 63;
+
+	return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval);
+}
+
+static int ltc4162l_get_die_temp(struct ltc4162l_info *info,
+				 union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, &regval);
+	if (ret)
+		return ret;
+
+	/* die_temp × 0.0215°C/LSB - 264.4°C */
+	ret = (s16)(regval & 0xFFFF);
+	ret *= 215;
+	ret /= 100; /* Centidegrees scale */
+	ret -= 26440;
+	val->intval = ret;
+
+	return 0;
+}
+
+static int ltc4162l_get_term_current(struct ltc4162l_info *info,
+				     union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, &regval);
+	if (ret)
+		return ret;
+
+	/* Check if C_OVER_X_THRESHOLD is enabled */
+	if (!(regval & BIT(2))) {
+		val->intval = 0;
+		return 0;
+	}
+
+	ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, &regval);
+	if (ret)
+		return ret;
+
+	/* 1.466μV / RSNSB amperes/LSB */
+	regval *= 14660u;
+	regval /= info->rsnsb;
+	val->intval = 100 * regval;
+
+	return 0;
+}
+
+static int ltc4162l_set_term_current(struct ltc4162l_info *info,
+				     unsigned int value)
+{
+	int ret;
+	unsigned int regval;
+
+	if (!value) {
+		/* Disable en_c_over_x_term when set to zero */
+		return regmap_update_bits(info->regmap,
+					  LTC4162L_CHARGER_CONFIG_BITS,
+					  BIT(2), 0);
+	}
+
+	regval = mult_frac(value, info->rsnsb, 14660u);
+	regval /= 100u;
+
+	ret =  regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval);
+	if (ret)
+		return ret;
+
+	/* Set en_c_over_x_term after changing the threshold value */
+	return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS,
+				  BIT(2), BIT(2));
+}
+
+/* Custom properties */
+static const char * const ltc4162l_charge_status_name[] = {
+	"ilim_reg_active", /* 32 */
+	"thermal_reg_active",
+	"vin_uvcl_active",
+	"iin_limit_active",
+	"constant_current",
+	"constant_voltage",
+	"charger_off" /* 0 */
+};
+
+static ssize_t charge_status_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	const char *result = ltc4162l_charge_status_name[
+				ARRAY_SIZE(ltc4162l_charge_status_name) - 1];
+	unsigned int regval;
+	unsigned int mask;
+	unsigned int index;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
+	if (ret)
+		return ret;
+
+	/* Only one bit is set according to datasheet, let's be safe here */
+	for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) {
+		if (regval & mask) {
+			result = ltc4162l_charge_status_name[index];
+			break;
+		}
+	}
+
+	return sprintf(buf, "%s\n", result);
+}
+static DEVICE_ATTR_RO(charge_status);
+
+static ssize_t vbat_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	union power_supply_propval val;
+	int ret;
+
+	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", val.intval);
+}
+static DEVICE_ATTR_RO(vbat);
+
+static ssize_t vbat_avg_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	union power_supply_propval val;
+	int ret;
+
+	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", val.intval);
+}
+static DEVICE_ATTR_RO(vbat_avg);
+
+static ssize_t ibat_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	union power_supply_propval val;
+	int ret;
+
+	ret = ltc4162l_get_ibat(info, &val);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", val.intval);
+}
+static DEVICE_ATTR_RO(ibat);
+
+static ssize_t force_telemetry_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, &regval);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n", regval & BIT(2) ? 1 : 0);
+}
+
+static ssize_t force_telemetry_store(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int value;
+
+	ret = kstrtouint(buf, 0, &value);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG,
+				 BIT(2), value ? BIT(2) : 0);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(force_telemetry);
+
+static ssize_t arm_ship_mode_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, &regval);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%u\n",
+		regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0);
+}
+
+static ssize_t arm_ship_mode_store(struct device *dev,
+	struct device_attribute *attr,
+	const char *buf,
+	size_t count)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+	int ret;
+	unsigned int value;
+
+	ret = kstrtouint(buf, 0, &value);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE,
+				value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(arm_ship_mode);
+
+static struct attribute *ltc4162l_sysfs_entries[] = {
+	&dev_attr_charge_status.attr,
+	&dev_attr_ibat.attr,
+	&dev_attr_vbat.attr,
+	&dev_attr_vbat_avg.attr,
+	&dev_attr_force_telemetry.attr,
+	&dev_attr_arm_ship_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group ltc4162l_attr_group = {
+	.name	= NULL,	/* put in device directory */
+	.attrs	= ltc4162l_sysfs_entries,
+};
+
+static const struct attribute_group *ltc4162l_attr_groups[] = {
+	&ltc4162l_attr_group,
+	NULL,
+};
+
+static int ltc4162l_get_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return ltc4162l_get_status(info, val);
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return ltc4162l_get_charge_type(info, val);
+	case POWER_SUPPLY_PROP_HEALTH:
+		return ltc4162l_get_health(info, val);
+	case POWER_SUPPLY_PROP_ONLINE:
+		return ltc4162l_get_online(info, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return ltc4162l_get_input_voltage(info, val);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ltc4162l_get_input_current(info, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return ltc4162l_get_icharge(info,
+				LTC4162L_ICHARGE_DAC, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return ltc4162l_get_icharge(info,
+				LTC4162L_CHARGE_CURRENT_SETTING, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return ltc4162l_get_vcharge(info,
+				LTC4162L_VCHARGE_DAC, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return ltc4162l_get_vcharge(info,
+				LTC4162L_VCHARGE_SETTING, val);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return ltc4162l_get_iin_limit_dac(info, val);
+	case POWER_SUPPLY_PROP_TEMP:
+		return ltc4162l_get_die_temp(info, val);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return ltc4162l_get_term_current(info, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc4162l_set_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 const union power_supply_propval *val)
+{
+	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return ltc4162l_set_icharge(info,
+				LTC4162L_CHARGE_CURRENT_SETTING, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return ltc4162l_set_vcharge(info,
+				LTC4162L_VCHARGE_SETTING, val->intval);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return ltc4162l_set_iin_limit(info, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return ltc4162l_set_term_current(info, val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ltc4162l_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+/* Charger power supply property routines */
+static enum power_supply_property ltc4162l_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static const struct power_supply_desc ltc4162l_desc = {
+	.name		= "ltc4162-l",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= ltc4162l_properties,
+	.num_properties	= ARRAY_SIZE(ltc4162l_properties),
+	.get_property	= ltc4162l_get_property,
+	.set_property	= ltc4162l_set_property,
+	.property_is_writeable = ltc4162l_property_is_writeable,
+};
+
+static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	/* all registers up to this one are writeable */
+	if (reg <= LTC4162L_CHARGER_CONFIG_BITS)
+		return true;
+
+	/* The ALERTS registers can be written to clear alerts */
+	if (reg >= LTC4162L_LIMIT_ALERTS_REG &&
+	    reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG)
+		return true;
+
+	return false;
+}
+
+static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	/* all registers after this one are read-only status registers */
+	return reg > LTC4162L_CHARGER_CONFIG_BITS;
+}
+
+static const struct regmap_config ltc4162l_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 16,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+	.writeable_reg	= ltc4162l_is_writeable_reg,
+	.volatile_reg	= ltc4162l_is_volatile_reg,
+	.max_register	= LTC4162L_INPUT_UNDERVOLTAGE_DAC,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static void ltc4162l_clear_interrupts(struct ltc4162l_info *info)
+{
+	/* Acknowledge interrupt to chip by clearing all events */
+	regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0);
+	regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0);
+	regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0);
+}
+
+static int ltc4162l_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct ltc4162l_info *info;
+	struct power_supply_config ltc4162l_config = {};
+	u32 value;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(dev, "No support for SMBUS_WORD_DATA\n");
+		return -ENODEV;
+	}
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->client = client;
+	i2c_set_clientdata(client, info);
+
+	info->regmap = devm_regmap_init_i2c(client, &ltc4162l_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		dev_err(dev, "Failed to initialize register map\n");
+		return PTR_ERR(info->regmap);
+	}
+
+	ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms",
+				       &info->rsnsb);
+	if (ret) {
+		dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n");
+		return ret;
+	}
+	if (!info->rsnsb)
+		return -EINVAL;
+
+	ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms",
+				       &info->rsnsi);
+	if (ret) {
+		dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n");
+		return ret;
+	}
+	if (!info->rsnsi)
+		return -EINVAL;
+
+	if (!device_property_read_u32(dev, "lltc,cell-count", &value))
+		info->cell_count = value;
+
+	ltc4162l_config.of_node = dev->of_node;
+	ltc4162l_config.drv_data = info;
+	ltc4162l_config.attr_grp = ltc4162l_attr_groups;
+
+	info->charger = devm_power_supply_register(dev, &ltc4162l_desc,
+						   &ltc4162l_config);
+	if (IS_ERR(info->charger)) {
+		dev_err(dev, "Failed to register charger\n");
+		return PTR_ERR(info->charger);
+	}
+
+	/* Disable the threshold alerts, we're not using them */
+	regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0);
+
+	/* Enable interrupts on all status changes */
+	regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG,
+		     0x1fff);
+	regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f);
+
+	ltc4162l_clear_interrupts(info);
+
+	return 0;
+}
+
+static void ltc4162l_alert(struct i2c_client *client,
+			   enum i2c_alert_protocol type, unsigned int flag)
+{
+	struct ltc4162l_info *info = i2c_get_clientdata(client);
+
+	if (type != I2C_PROTOCOL_SMBUS_ALERT)
+		return;
+
+	ltc4162l_clear_interrupts(info);
+	power_supply_changed(info->charger);
+}
+
+static const struct i2c_device_id ltc4162l_i2c_id_table[] = {
+	{ "ltc4162-l", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table);
+
+static const struct of_device_id ltc4162l_of_match[] = {
+	{ .compatible = "lltc,ltc4162-l", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ltc4162l_of_match);
+
+static struct i2c_driver ltc4162l_driver = {
+	.probe		= ltc4162l_probe,
+	.alert		= ltc4162l_alert,
+	.id_table	= ltc4162l_i2c_id_table,
+	.driver = {
+		.name		= "ltc4162-l-charger",
+		.of_match_table	= of_match_ptr(ltc4162l_of_match),
+	},
+};
+module_i2c_driver(ltc4162l_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
+MODULE_DESCRIPTION("LTC4162-L charger driver");
diff --git a/drivers/power/supply/max14577_charger.c b/drivers/power/supply/max14577_charger.c
new file mode 100644
index 000000000..f244cd902
--- /dev/null
+++ b/drivers/power/supply/max14577_charger.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577_charger.c - Battery charger driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/mfd/max14577.h>
+
+struct max14577_charger {
+	struct device		*dev;
+	struct max14577		*max14577;
+	struct power_supply	*charger;
+
+	struct max14577_charger_platform_data	*pdata;
+};
+
+/*
+ * Helper function for mapping values of STATUS2/CHGTYP register on max14577
+ * and max77836 chipsets to enum maxim_muic_charger_type.
+ */
+static enum max14577_muic_charger_type maxim_get_charger_type(
+		enum maxim_device_type dev_type, u8 val) {
+	switch (val) {
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+		return val;
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+		if (dev_type == MAXIM_DEVICE_TYPE_MAX77836)
+			val |= 0x8;
+		return val;
+	default:
+		WARN_ONCE(1, "max14577: Unsupported chgtyp register value 0x%02x", val);
+		return val;
+	}
+}
+
+static int max14577_get_charger_state(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	int ret;
+	u8 reg_data;
+
+	/*
+	 * Charging occurs only if:
+	 *  - CHGCTRL2/MBCHOSTEN == 1
+	 *  - STATUS2/CGMBC == 1
+	 *
+	 * TODO:
+	 *  - handle FULL after Top-off timer (EOC register may be off
+	 *    and the charger won't be charging although MBCHOSTEN is on)
+	 *  - handle properly dead-battery charging (respect timer)
+	 *  - handle timers (fast-charge and prequal) /MBCCHGERR/
+	 */
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0) {
+		*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		goto out;
+	}
+
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if (reg_data & STATUS3_CGMBC_MASK) {
+		/* Charger or USB-cable is connected */
+		if (reg_data & STATUS3_EOC_MASK)
+			*val = POWER_SUPPLY_STATUS_FULL;
+		else
+			*val = POWER_SUPPLY_STATUS_CHARGING;
+		goto out;
+	}
+
+	*val = POWER_SUPPLY_STATUS_DISCHARGING;
+
+out:
+	return ret;
+}
+
+/*
+ * Supported charge types:
+ *  - POWER_SUPPLY_CHARGE_TYPE_NONE
+ *  - POWER_SUPPLY_CHARGE_TYPE_FAST
+ */
+static int max14577_get_charge_type(struct max14577_charger *chg, int *val)
+{
+	int ret, charging;
+
+	/*
+	 * TODO: CHARGE_TYPE_TRICKLE (VCHGR_RC or EOC)?
+	 * As spec says:
+	 * [after reaching EOC interrupt]
+	 * "When the battery is fully charged, the 30-minute (typ)
+	 *  top-off timer starts. The device continues to trickle
+	 *  charge the battery until the top-off timer runs out."
+	 */
+	ret = max14577_get_charger_state(chg, &charging);
+	if (ret < 0)
+		return ret;
+
+	if (charging == POWER_SUPPLY_STATUS_CHARGING)
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+	else
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+
+	return 0;
+}
+
+static int max14577_get_online(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	u8 reg_data;
+	int ret;
+	enum max14577_muic_charger_type chg_type;
+
+	ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+	if (ret < 0)
+		return ret;
+
+	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	switch (chg_type) {
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX77836_CHARGER_TYPE_SPECIAL_BIAS:
+		*val = 1;
+		break;
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+	case MAX77836_CHARGER_TYPE_RESERVED:
+	default:
+		*val = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Supported health statuses:
+ *  - POWER_SUPPLY_HEALTH_DEAD
+ *  - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ *  - POWER_SUPPLY_HEALTH_GOOD
+ */
+static int max14577_get_battery_health(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	int ret;
+	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
+
+	ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	if (chg_type == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
+		*val = POWER_SUPPLY_HEALTH_DEAD;
+		goto out;
+	}
+
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if (reg_data & STATUS3_OVP_MASK) {
+		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		goto out;
+	}
+
+	/* Not dead, not overvoltage */
+	*val = POWER_SUPPLY_HEALTH_GOOD;
+
+out:
+	return ret;
+}
+
+/*
+ * Always returns 1.
+ * The max14577 chip doesn't report any status of battery presence.
+ * Lets assume that it will always be used with some battery.
+ */
+static int max14577_get_present(struct max14577_charger *chg, int *val)
+{
+	*val = 1;
+
+	return 0;
+}
+
+static int max14577_set_fast_charge_timer(struct max14577_charger *chg,
+		unsigned long hours)
+{
+	u8 reg_data;
+
+	switch (hours) {
+	case 5 ... 7:
+		reg_data = hours - 3;
+		break;
+	case 0:
+		/* Disable */
+		reg_data = 0x7;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for Fast-Charge Timer: %lu\n",
+				hours);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL1_TCHW_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_REG_CHGCTRL1, CHGCTRL1_TCHW_MASK, reg_data);
+}
+
+static int max14577_init_constant_voltage(struct max14577_charger *chg,
+		unsigned int uvolt)
+{
+	u8 reg_data;
+
+	if (uvolt < MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN ||
+			uvolt > MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		return -EINVAL;
+
+	if (uvolt == 4200000)
+		reg_data = 0x0;
+	else if (uvolt == MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		reg_data = 0x1f;
+	else if (uvolt <= 4280000) {
+		unsigned int val = uvolt;
+
+		val -= MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN;
+		val /= MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP;
+		if (uvolt <= 4180000)
+			reg_data = 0x1 + val;
+		else
+			reg_data = val; /* Fix for gap between 4.18V and 4.22V */
+	} else
+		return -EINVAL;
+
+	reg_data <<= CHGCTRL3_MBCCVWRC_SHIFT;
+
+	return max14577_write_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL3, reg_data);
+}
+
+static int max14577_init_eoc(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int current_bits;
+	u8 reg_data;
+
+	switch (chg->max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		if (uamp < 5000)
+			return -EINVAL; /* Requested current is too low */
+
+		if (uamp >= 7500 && uamp < 10000)
+			current_bits = 0x0;
+		else if (uamp <= 50000) {
+			/* <5000, 7499> and <10000, 50000> */
+			current_bits = uamp / 5000;
+		} else {
+			uamp = min(uamp, 100000U) - 50000U;
+			current_bits = 0xa + uamp / 10000;
+		}
+		break;
+
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		if (uamp < MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN)
+			return -EINVAL; /* Requested current is too low */
+
+		uamp = min(uamp, MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+		uamp -= MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN;
+		current_bits = uamp / MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP;
+		break;
+	}
+
+	reg_data = current_bits << CHGCTRL5_EOCS_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL5, CHGCTRL5_EOCS_MASK,
+			reg_data);
+}
+
+static int max14577_init_fast_charge(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	u8 reg_data;
+	int ret;
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[chg->max14577->dev_type];
+
+	ret = maxim_charger_calc_reg_current(limits, uamp, uamp, &reg_data);
+	if (ret) {
+		dev_err(chg->dev, "Wrong value for fast charge: %u\n", uamp);
+		return ret;
+	}
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ * Some of these values are equal to defaults in MAX14577E
+ * data sheet but there are minor differences.
+ */
+static int max14577_charger_reg_init(struct max14577_charger *chg)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	u8 reg_data;
+	int ret;
+
+	/*
+	 * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0)
+	 * Charger-Detection Enable, default on (set CHGDETEN to 1)
+	 * Combined mask of CHGDETEN and CHGTYPMAN will zero the CHGTYPMAN bit
+	 */
+	reg_data = 0x1 << CDETCTRL1_CHGDETEN_SHIFT;
+	max14577_update_reg(rmap, MAX14577_REG_CDETCTRL1,
+			CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK,
+			reg_data);
+
+	/*
+	 * Wall-Adapter Rapid Charge, default on
+	 * Battery-Charger, default on
+	 */
+	reg_data = 0x1 << CHGCTRL2_VCHGR_RC_SHIFT;
+	reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data);
+
+	/* Auto Charging Stop, default off */
+	reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data);
+
+	ret = max14577_init_constant_voltage(chg, chg->pdata->constant_uvolt);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_eoc(chg, chg->pdata->eoc_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_fast_charge(chg, chg->pdata->fast_charge_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg,
+			MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT);
+	if (ret)
+		return ret;
+
+	/* Initialize Overvoltage-Protection Threshold */
+	switch (chg->pdata->ovp_uvolt) {
+	case 7500000:
+		reg_data = 0x0;
+		break;
+	case 6000000:
+	case 6500000:
+	case 7000000:
+		reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for OVP: %u\n",
+				chg->pdata->ovp_uvolt);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL7_OTPCGHCVS_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data);
+
+	return 0;
+}
+
+/* Support property from charger */
+static enum power_supply_property max14577_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static const char * const model_names[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN]	= "MAX14577-like",
+	[MAXIM_DEVICE_TYPE_MAX14577]	= "MAX14577",
+	[MAXIM_DEVICE_TYPE_MAX77836]	= "MAX77836",
+};
+static const char *manufacturer = "Maxim Integrated";
+
+static int max14577_charger_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max14577_charger *chg = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max14577_get_charger_state(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = max14577_get_charge_type(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = max14577_get_battery_health(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = max14577_get_present(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = max14577_get_online(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		BUILD_BUG_ON(ARRAY_SIZE(model_names) != MAXIM_DEVICE_TYPE_NUM);
+		val->strval = model_names[chg->max14577->dev_type];
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct power_supply_desc max14577_charger_desc = {
+	.name = "max14577-charger",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = max14577_charger_props,
+	.num_properties = ARRAY_SIZE(max14577_charger_props),
+	.get_property = max14577_charger_get_property,
+};
+
+#ifdef CONFIG_OF
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	struct max14577_charger_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No charger OF node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_property_read_u32(np, "maxim,constant-uvolt",
+			&pdata->constant_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,constant-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+			&pdata->fast_charge_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,fast-charge-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,eoc-uamp", &pdata->eoc_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,eoc-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,ovp-uvolt", &pdata->ovp_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,ovp-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+static ssize_t show_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	u8 reg_data;
+	int ret;
+	unsigned int val;
+
+	ret = max14577_read_reg(chg->max14577->regmap, MAX14577_REG_CHGCTRL1,
+			&reg_data);
+	if (ret)
+		return ret;
+
+	reg_data &= CHGCTRL1_TCHW_MASK;
+	reg_data >>= CHGCTRL1_TCHW_SHIFT;
+	switch (reg_data) {
+	case 0x2 ... 0x4:
+		val = reg_data + 3;
+		break;
+	case 0x7:
+		val = 0;
+		break;
+	default:
+		val = 5;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(fast_charge_timer, S_IRUGO | S_IWUSR,
+		show_fast_charge_timer, store_fast_charge_timer);
+
+static int max14577_charger_probe(struct platform_device *pdev)
+{
+	struct max14577_charger *chg;
+	struct power_supply_config psy_cfg = {};
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+	chg->dev = &pdev->dev;
+	chg->max14577 = max14577;
+
+	chg->pdata = max14577_charger_dt_init(pdev);
+	if (IS_ERR_OR_NULL(chg->pdata))
+		return PTR_ERR(chg->pdata);
+
+	ret = max14577_charger_reg_init(chg);
+	if (ret)
+		return ret;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create sysfs entry\n");
+		return ret;
+	}
+
+	psy_cfg.drv_data = chg;
+	chg->charger = power_supply_register(&pdev->dev, &max14577_charger_desc,
+						&psy_cfg);
+	if (IS_ERR(chg->charger)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		ret = PTR_ERR(chg->charger);
+		goto err;
+	}
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN +
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP * 0xf !=
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
+}
+
+static int max14577_charger_remove(struct platform_device *pdev)
+{
+	struct max14577_charger *chg = platform_get_drvdata(pdev);
+
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	power_supply_unregister(chg->charger);
+
+	return 0;
+}
+
+static const struct platform_device_id max14577_charger_id[] = {
+	{ "max14577-charger", MAXIM_DEVICE_TYPE_MAX14577, },
+	{ "max77836-charger", MAXIM_DEVICE_TYPE_MAX77836, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max14577_charger_id);
+
+static const struct of_device_id of_max14577_charger_dt_match[] = {
+	{ .compatible = "maxim,max14577-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, },
+	{ .compatible = "maxim,max77836-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max14577_charger_dt_match);
+
+static struct platform_driver max14577_charger_driver = {
+	.driver = {
+		.name	= "max14577-charger",
+		.of_match_table = of_max14577_charger_dt_match,
+	},
+	.probe		= max14577_charger_probe,
+	.remove		= max14577_charger_remove,
+	.id_table	= max14577_charger_id,
+};
+module_platform_driver(max14577_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c
new file mode 100644
index 000000000..fc3682889
--- /dev/null
+++ b/drivers/power/supply/max14656_charger_detector.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX14656 / AL32 USB Charger Detector driver
+ *
+ * Copyright (C) 2014 LG Electronics, Inc
+ * Copyright (C) 2016 Alexander Kurz <akurz@blala.de>
+ *
+ * Components from Maxim AL32 Charger detection Driver for MX50 Yoshi Board
+ * Copyright (C) Amazon Technologies Inc. All rights reserved.
+ * Manish Lachwani (lachwani@lab126.com)
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+#include <linux/devm-helpers.h>
+
+#define MAX14656_MANUFACTURER	"Maxim Integrated"
+#define MAX14656_NAME		"max14656"
+
+#define MAX14656_DEVICE_ID	0x00
+#define MAX14656_INTERRUPT_1	0x01
+#define MAX14656_INTERRUPT_2	0x02
+#define MAX14656_STATUS_1	0x03
+#define MAX14656_STATUS_2	0x04
+#define MAX14656_INTMASK_1	0x05
+#define MAX14656_INTMASK_2	0x06
+#define MAX14656_CONTROL_1	0x07
+#define MAX14656_CONTROL_2	0x08
+#define MAX14656_CONTROL_3	0x09
+
+#define DEVICE_VENDOR_MASK	0xf0
+#define DEVICE_REV_MASK		0x0f
+#define INT_EN_REG_MASK		BIT(4)
+#define CHG_TYPE_INT_MASK	BIT(0)
+#define STATUS1_VB_VALID_MASK	BIT(4)
+#define STATUS1_CHG_TYPE_MASK	0xf
+#define INT1_DCD_TIMEOUT_MASK	BIT(7)
+#define CONTROL1_DEFAULT	0x0d
+#define CONTROL1_INT_EN		BIT(4)
+#define CONTROL1_INT_ACTIVE_HIGH	BIT(5)
+#define CONTROL1_EDGE		BIT(7)
+#define CONTROL2_DEFAULT	0x8e
+#define CONTROL2_ADC_EN		BIT(0)
+#define CONTROL3_DEFAULT	0x8d
+
+enum max14656_chg_type {
+	MAX14656_NO_CHARGER	= 0,
+	MAX14656_SDP_CHARGER,
+	MAX14656_CDP_CHARGER,
+	MAX14656_DCP_CHARGER,
+	MAX14656_APPLE_500MA_CHARGER,
+	MAX14656_APPLE_1A_CHARGER,
+	MAX14656_APPLE_2A_CHARGER,
+	MAX14656_SPECIAL_500MA_CHARGER,
+	MAX14656_APPLE_12W,
+	MAX14656_CHARGER_LAST
+};
+
+static const struct max14656_chg_type_props {
+	enum power_supply_type type;
+} chg_type_props[] = {
+	{ POWER_SUPPLY_TYPE_UNKNOWN },
+	{ POWER_SUPPLY_TYPE_USB },
+	{ POWER_SUPPLY_TYPE_USB_CDP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB_DCP },
+	{ POWER_SUPPLY_TYPE_USB },
+};
+
+struct max14656_chip {
+	struct i2c_client	*client;
+	struct power_supply	*detect_psy;
+	struct power_supply_desc psy_desc;
+	struct delayed_work	irq_work;
+
+	int irq;
+	int online;
+};
+
+static int max14656_read_reg(struct i2c_client *client, int reg, u8 *val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"i2c read fail: can't read from %02x: %d\n",
+			reg, ret);
+		return ret;
+	}
+	*val = ret;
+	return 0;
+}
+
+static int max14656_write_reg(struct i2c_client *client, int reg, u8 val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"i2c write fail: can't write %02x to %02x: %d\n",
+			val, reg, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static int max14656_read_block_reg(struct i2c_client *client, u8 reg,
+				  u8 length, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, reg, length, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to block read reg 0x%x: %d\n",
+				reg, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define        REG_TOTAL_NUM   5
+static void max14656_irq_worker(struct work_struct *work)
+{
+	struct max14656_chip *chip =
+		container_of(work, struct max14656_chip, irq_work.work);
+
+	u8 buf[REG_TOTAL_NUM];
+	u8 chg_type;
+
+	max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+				REG_TOTAL_NUM, buf);
+
+	if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
+		(buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
+		chg_type = buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK;
+		if (chg_type < MAX14656_CHARGER_LAST)
+			chip->psy_desc.type = chg_type_props[chg_type].type;
+		else
+			chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+		chip->online = 1;
+	} else {
+		chip->online = 0;
+		chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+	}
+
+	power_supply_changed(chip->detect_psy);
+}
+
+static irqreturn_t max14656_irq(int irq, void *dev_id)
+{
+	struct max14656_chip *chip = dev_id;
+
+	schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(100));
+
+	return IRQ_HANDLED;
+}
+
+static int max14656_hw_init(struct max14656_chip *chip)
+{
+	uint8_t val = 0;
+	uint8_t rev;
+	struct i2c_client *client = chip->client;
+
+	if (max14656_read_reg(client, MAX14656_DEVICE_ID, &val))
+		return -ENODEV;
+
+	if ((val & DEVICE_VENDOR_MASK) != 0x20) {
+		dev_err(&client->dev, "wrong vendor ID %d\n",
+			((val & DEVICE_VENDOR_MASK) >> 4));
+		return -ENODEV;
+	}
+	rev = val & DEVICE_REV_MASK;
+
+	/* Turn on ADC_EN */
+	if (max14656_write_reg(client, MAX14656_CONTROL_2, CONTROL2_ADC_EN))
+		return -EINVAL;
+
+	/* turn on interrupts and low power mode */
+	if (max14656_write_reg(client, MAX14656_CONTROL_1,
+		CONTROL1_DEFAULT |
+		CONTROL1_INT_EN |
+		CONTROL1_INT_ACTIVE_HIGH |
+		CONTROL1_EDGE))
+		return -EINVAL;
+
+	if (max14656_write_reg(client, MAX14656_INTMASK_1, 0x3))
+		return -EINVAL;
+
+	if (max14656_write_reg(client, MAX14656_INTMASK_2, 0x1))
+		return -EINVAL;
+
+	dev_info(&client->dev, "detected revision %d\n", rev);
+	return 0;
+}
+
+static int max14656_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max14656_chip *chip = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = chip->online;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = MAX14656_NAME;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = MAX14656_MANUFACTURER;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property max14656_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max14656_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct power_supply_config psy_cfg = {};
+	struct max14656_chip *chip;
+	int irq = client->irq;
+	int ret = 0;
+
+	if (irq <= 0) {
+		dev_err(dev, "invalid irq number: %d\n", irq);
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	psy_cfg.drv_data = chip;
+	chip->client = client;
+	chip->online = 0;
+	chip->psy_desc.name = MAX14656_NAME;
+	chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+	chip->psy_desc.properties = max14656_battery_props;
+	chip->psy_desc.num_properties = ARRAY_SIZE(max14656_battery_props);
+	chip->psy_desc.get_property = max14656_get_property;
+	chip->irq = irq;
+
+	ret = max14656_hw_init(chip);
+	if (ret)
+		return -ENODEV;
+
+	chip->detect_psy = devm_power_supply_register(dev,
+		       &chip->psy_desc, &psy_cfg);
+	if (IS_ERR(chip->detect_psy)) {
+		dev_err(dev, "power_supply_register failed\n");
+		return -EINVAL;
+	}
+
+	ret = devm_delayed_work_autocancel(dev, &chip->irq_work,
+					   max14656_irq_worker);
+	if (ret) {
+		dev_err(dev, "devm_delayed_work_autocancel %d failed\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_irq(dev, chip->irq, max14656_irq,
+			       IRQF_TRIGGER_FALLING,
+			       MAX14656_NAME, chip);
+	if (ret) {
+		dev_err(dev, "request_irq %d failed\n", chip->irq);
+		return -EINVAL;
+	}
+	enable_irq_wake(chip->irq);
+
+	schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(2000));
+
+	return 0;
+}
+
+static const struct i2c_device_id max14656_id[] = {
+	{ "max14656", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max14656_id);
+
+static const struct of_device_id max14656_match_table[] = {
+	{ .compatible = "maxim,max14656", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, max14656_match_table);
+
+static struct i2c_driver max14656_i2c_driver = {
+	.driver = {
+		.name	= "max14656",
+		.of_match_table = max14656_match_table,
+	},
+	.probe		= max14656_probe,
+	.id_table	= max14656_id,
+};
+module_i2c_driver(max14656_i2c_driver);
+
+MODULE_DESCRIPTION("MAX14656 USB charger detector");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
new file mode 100644
index 000000000..a9aef1e8b
--- /dev/null
+++ b/drivers/power/supply/max17040_battery.c
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+//  max17040_battery.c
+//  fuel-gauge systems for lithium-ion (Li+) batteries
+//
+//  Copyright (C) 2009 Samsung Electronics
+//  Minkyu Kang <mk7.kang@samsung.com>
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX17040_VCELL	0x02
+#define MAX17040_SOC	0x04
+#define MAX17040_MODE	0x06
+#define MAX17040_VER	0x08
+#define MAX17040_CONFIG	0x0C
+#define MAX17040_STATUS	0x1A
+#define MAX17040_CMD	0xFE
+
+
+#define MAX17040_DELAY		1000
+#define MAX17040_BATTERY_FULL	95
+#define MAX17040_RCOMP_DEFAULT  0x9700
+
+#define MAX17040_ATHD_MASK		0x3f
+#define MAX17040_ALSC_MASK		0x40
+#define MAX17040_ATHD_DEFAULT_POWER_UP	4
+#define MAX17040_STATUS_HD_MASK		0x1000
+#define MAX17040_STATUS_SC_MASK		0x2000
+#define MAX17040_CFG_RCOMP_MASK		0xff00
+
+enum chip_id {
+	ID_MAX17040,
+	ID_MAX17041,
+	ID_MAX17043,
+	ID_MAX17044,
+	ID_MAX17048,
+	ID_MAX17049,
+	ID_MAX17058,
+	ID_MAX17059,
+};
+
+/* values that differ by chip_id */
+struct chip_data {
+	u16 reset_val;
+	u16 vcell_shift;
+	u16 vcell_mul;
+	u16 vcell_div;
+	u8  has_low_soc_alert;
+	u8  rcomp_bytes;
+	u8  has_soc_alert;
+};
+
+static struct chip_data max17040_family[] = {
+	[ID_MAX17040] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 1250,
+		.vcell_div = 1,
+		.has_low_soc_alert = 0,
+		.rcomp_bytes = 2,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17041] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 2500,
+		.vcell_div = 1,
+		.has_low_soc_alert = 0,
+		.rcomp_bytes = 2,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17043] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 1250,
+		.vcell_div = 1,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17044] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 2500,
+		.vcell_div = 1,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17048] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 8,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 1,
+	},
+	[ID_MAX17049] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 4,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 1,
+	},
+	[ID_MAX17058] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 8,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17059] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 4,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+};
+
+struct max17040_chip {
+	struct i2c_client		*client;
+	struct regmap			*regmap;
+	struct delayed_work		work;
+	struct power_supply		*battery;
+	struct chip_data		data;
+
+	/* battery capacity */
+	int soc;
+	/* Low alert threshold from 32% to 1% of the State of Charge */
+	u32 low_soc_alert;
+	/* some devices return twice the capacity */
+	bool quirk_double_soc;
+	/* higher 8 bits for 17043+, 16 bits for 17040,41 */
+	u16 rcomp;
+};
+
+static int max17040_reset(struct max17040_chip *chip)
+{
+	return regmap_write(chip->regmap, MAX17040_CMD, chip->data.reset_val);
+}
+
+static int max17040_set_low_soc_alert(struct max17040_chip *chip, u32 level)
+{
+	level = 32 - level * (chip->quirk_double_soc ? 2 : 1);
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+			MAX17040_ATHD_MASK, level);
+}
+
+static int max17040_set_soc_alert(struct max17040_chip *chip, bool enable)
+{
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+			MAX17040_ALSC_MASK, enable ? MAX17040_ALSC_MASK : 0);
+}
+
+static int max17040_set_rcomp(struct max17040_chip *chip, u16 rcomp)
+{
+	u16 mask = chip->data.rcomp_bytes == 2 ?
+		0xffff : MAX17040_CFG_RCOMP_MASK;
+
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG, mask, rcomp);
+}
+
+static int max17040_raw_vcell_to_uvolts(struct max17040_chip *chip, u16 vcell)
+{
+	struct chip_data *d = &chip->data;
+
+	return (vcell >> d->vcell_shift) * d->vcell_mul / d->vcell_div;
+}
+
+
+static int max17040_get_vcell(struct max17040_chip *chip)
+{
+	u32 vcell;
+
+	regmap_read(chip->regmap, MAX17040_VCELL, &vcell);
+
+	return max17040_raw_vcell_to_uvolts(chip, vcell);
+}
+
+static int max17040_get_soc(struct max17040_chip *chip)
+{
+	u32 soc;
+
+	regmap_read(chip->regmap, MAX17040_SOC, &soc);
+
+	return soc >> (chip->quirk_double_soc ? 9 : 8);
+}
+
+static int max17040_get_version(struct max17040_chip *chip)
+{
+	int ret;
+	u32 version;
+
+	ret = regmap_read(chip->regmap, MAX17040_VER, &version);
+
+	return ret ? ret : version;
+}
+
+static int max17040_get_online(struct max17040_chip *chip)
+{
+	return 1;
+}
+
+static int max17040_get_of_data(struct max17040_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	struct chip_data *data = &max17040_family[
+		(uintptr_t) of_device_get_match_data(dev)];
+	int rcomp_len;
+	u8 rcomp[2];
+
+	chip->quirk_double_soc = device_property_read_bool(dev,
+							   "maxim,double-soc");
+
+	chip->low_soc_alert = MAX17040_ATHD_DEFAULT_POWER_UP;
+	device_property_read_u32(dev,
+				 "maxim,alert-low-soc-level",
+				 &chip->low_soc_alert);
+
+	if (chip->low_soc_alert <= 0 ||
+	    chip->low_soc_alert > (chip->quirk_double_soc ? 16 : 32)) {
+		dev_err(dev, "maxim,alert-low-soc-level out of bounds\n");
+		return -EINVAL;
+	}
+
+	rcomp_len = device_property_count_u8(dev, "maxim,rcomp");
+	chip->rcomp = MAX17040_RCOMP_DEFAULT;
+	if (rcomp_len == data->rcomp_bytes) {
+		if (!device_property_read_u8_array(dev, "maxim,rcomp",
+						   rcomp, rcomp_len))
+			chip->rcomp = rcomp_len == 2 ? rcomp[0] << 8 | rcomp[1] :
+				      rcomp[0] << 8;
+	} else if (rcomp_len > 0) {
+		dev_err(dev, "maxim,rcomp has incorrect length\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void max17040_check_changes(struct max17040_chip *chip)
+{
+	chip->soc = max17040_get_soc(chip);
+}
+
+static void max17040_queue_work(struct max17040_chip *chip)
+{
+	queue_delayed_work(system_power_efficient_wq, &chip->work,
+			   MAX17040_DELAY);
+}
+
+static void max17040_stop_work(void *data)
+{
+	struct max17040_chip *chip = data;
+
+	cancel_delayed_work_sync(&chip->work);
+}
+
+static void max17040_work(struct work_struct *work)
+{
+	struct max17040_chip *chip;
+	int last_soc;
+
+	chip = container_of(work, struct max17040_chip, work.work);
+
+	/* store SOC to check changes */
+	last_soc = chip->soc;
+	max17040_check_changes(chip);
+
+	/* check changes and send uevent */
+	if (last_soc != chip->soc)
+		power_supply_changed(chip->battery);
+
+	max17040_queue_work(chip);
+}
+
+/* Returns true if alert cause was SOC change, not low SOC */
+static bool max17040_handle_soc_alert(struct max17040_chip *chip)
+{
+	bool ret = true;
+	u32 data;
+
+	regmap_read(chip->regmap, MAX17040_STATUS, &data);
+
+	if (data & MAX17040_STATUS_HD_MASK) {
+		// this alert was caused by low soc
+		ret = false;
+	}
+	if (data & MAX17040_STATUS_SC_MASK) {
+		// soc change bit -- deassert to mark as handled
+		regmap_write(chip->regmap, MAX17040_STATUS,
+				data & ~MAX17040_STATUS_SC_MASK);
+	}
+
+	return ret;
+}
+
+static irqreturn_t max17040_thread_handler(int id, void *dev)
+{
+	struct max17040_chip *chip = dev;
+
+	if (!(chip->data.has_soc_alert && max17040_handle_soc_alert(chip)))
+		dev_warn(&chip->client->dev, "IRQ: Alert battery low level\n");
+
+	/* read registers */
+	max17040_check_changes(chip);
+
+	/* send uevent */
+	power_supply_changed(chip->battery);
+
+	/* reset alert bit */
+	max17040_set_low_soc_alert(chip, chip->low_soc_alert);
+
+	return IRQ_HANDLED;
+}
+
+static int max17040_enable_alert_irq(struct max17040_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					max17040_thread_handler, IRQF_ONESHOT,
+					chip->battery->desc->name, chip);
+
+	return ret;
+}
+
+static int max17040_prop_writeable(struct power_supply *psy,
+				   enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static int max17040_set_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    const union power_supply_propval *val)
+{
+	struct max17040_chip *chip = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		/* alert threshold can be programmed from 1% up to 16/32% */
+		if ((val->intval < 1) ||
+		    (val->intval > (chip->quirk_double_soc ? 16 : 32))) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = max17040_set_low_soc_alert(chip, val->intval);
+		chip->low_soc_alert = val->intval;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int max17040_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max17040_chip *chip = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = max17040_get_online(chip);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = max17040_get_vcell(chip);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = max17040_get_soc(chip);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		val->intval = chip->low_soc_alert;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct regmap_config max17040_regmap = {
+	.reg_bits	= 8,
+	.reg_stride	= 2,
+	.val_bits	= 16,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static enum power_supply_property max17040_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
+};
+
+static const struct power_supply_desc max17040_battery_desc = {
+	.name			= "battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= max17040_get_property,
+	.set_property		= max17040_set_property,
+	.property_is_writeable  = max17040_prop_writeable,
+	.properties		= max17040_battery_props,
+	.num_properties		= ARRAY_SIZE(max17040_battery_props),
+};
+
+static int max17040_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct power_supply_config psy_cfg = {};
+	struct max17040_chip *chip;
+	enum chip_id chip_id;
+	bool enable_irq = false;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+		return -EIO;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->regmap = devm_regmap_init_i2c(client, &max17040_regmap);
+	if (IS_ERR(chip->regmap))
+		return PTR_ERR(chip->regmap);
+	chip_id = (enum chip_id) id->driver_data;
+	if (client->dev.of_node) {
+		ret = max17040_get_of_data(chip);
+		if (ret)
+			return ret;
+		chip_id = (uintptr_t)of_device_get_match_data(&client->dev);
+	}
+	chip->data = max17040_family[chip_id];
+
+	i2c_set_clientdata(client, chip);
+	psy_cfg.drv_data = chip;
+
+	chip->battery = devm_power_supply_register(&client->dev,
+				&max17040_battery_desc, &psy_cfg);
+	if (IS_ERR(chip->battery)) {
+		dev_err(&client->dev, "failed: power supply register\n");
+		return PTR_ERR(chip->battery);
+	}
+
+	ret = max17040_get_version(chip);
+	if (ret < 0)
+		return ret;
+	dev_dbg(&chip->client->dev, "MAX17040 Fuel-Gauge Ver 0x%x\n", ret);
+
+	if (chip_id == ID_MAX17040 || chip_id == ID_MAX17041)
+		max17040_reset(chip);
+
+	max17040_set_rcomp(chip, chip->rcomp);
+
+	/* check interrupt */
+	if (client->irq && chip->data.has_low_soc_alert) {
+		ret = max17040_set_low_soc_alert(chip, chip->low_soc_alert);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to set low SOC alert: err %d\n", ret);
+			return ret;
+		}
+
+		enable_irq = true;
+	}
+
+	if (client->irq && chip->data.has_soc_alert) {
+		ret = max17040_set_soc_alert(chip, 1);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to set SOC alert: err %d\n", ret);
+			return ret;
+		}
+		enable_irq = true;
+	} else {
+		/* soc alerts negate the need for polling */
+		INIT_DEFERRABLE_WORK(&chip->work, max17040_work);
+		ret = devm_add_action(&client->dev, max17040_stop_work, chip);
+		if (ret)
+			return ret;
+		max17040_queue_work(chip);
+	}
+
+	if (enable_irq) {
+		ret = max17040_enable_alert_irq(chip);
+		if (ret) {
+			client->irq = 0;
+			dev_warn(&client->dev,
+				 "Failed to get IRQ err %d\n", ret);
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int max17040_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max17040_chip *chip = i2c_get_clientdata(client);
+
+	if (client->irq && chip->data.has_soc_alert)
+		// disable soc alert to prevent wakeup
+		max17040_set_soc_alert(chip, 0);
+	else
+		cancel_delayed_work(&chip->work);
+
+	if (client->irq && device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int max17040_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max17040_chip *chip = i2c_get_clientdata(client);
+
+	if (client->irq && device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	if (client->irq && chip->data.has_soc_alert)
+		max17040_set_soc_alert(chip, 1);
+	else
+		max17040_queue_work(chip);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
+#define MAX17040_PM_OPS (&max17040_pm_ops)
+
+#else
+
+#define MAX17040_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct i2c_device_id max17040_id[] = {
+	{ "max17040", ID_MAX17040 },
+	{ "max17041", ID_MAX17041 },
+	{ "max17043", ID_MAX17043 },
+	{ "max77836-battery", ID_MAX17043 },
+	{ "max17044", ID_MAX17044 },
+	{ "max17048", ID_MAX17048 },
+	{ "max17049", ID_MAX17049 },
+	{ "max17058", ID_MAX17058 },
+	{ "max17059", ID_MAX17059 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max17040_id);
+
+static const struct of_device_id max17040_of_match[] = {
+	{ .compatible = "maxim,max17040", .data = (void *) ID_MAX17040 },
+	{ .compatible = "maxim,max17041", .data = (void *) ID_MAX17041 },
+	{ .compatible = "maxim,max17043", .data = (void *) ID_MAX17043 },
+	{ .compatible = "maxim,max77836-battery", .data = (void *) ID_MAX17043 },
+	{ .compatible = "maxim,max17044", .data = (void *) ID_MAX17044 },
+	{ .compatible = "maxim,max17048", .data = (void *) ID_MAX17048 },
+	{ .compatible = "maxim,max17049", .data = (void *) ID_MAX17049 },
+	{ .compatible = "maxim,max17058", .data = (void *) ID_MAX17058 },
+	{ .compatible = "maxim,max17059", .data = (void *) ID_MAX17059 },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, max17040_of_match);
+
+static struct i2c_driver max17040_i2c_driver = {
+	.driver	= {
+		.name	= "max17040",
+		.of_match_table = max17040_of_match,
+		.pm	= MAX17040_PM_OPS,
+	},
+	.probe		= max17040_probe,
+	.id_table	= max17040_id,
+};
+module_i2c_driver(max17040_i2c_driver);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("MAX17040 Fuel Gauge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
new file mode 100644
index 000000000..ab031bbfb
--- /dev/null
+++ b/drivers/power/supply/max17042_battery.c
@@ -0,0 +1,1230 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Fuel gauge driver for Maxim 17042 / 8966 / 8997
+//  Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+//
+// This driver is based on max17040_battery.c
+
+#include <linux/acpi.h>
+#include <linux/devm-helpers.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/power/max17042_battery.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* Status register bits */
+#define STATUS_POR_BIT         (1 << 1)
+#define STATUS_BST_BIT         (1 << 3)
+#define STATUS_VMN_BIT         (1 << 8)
+#define STATUS_TMN_BIT         (1 << 9)
+#define STATUS_SMN_BIT         (1 << 10)
+#define STATUS_BI_BIT          (1 << 11)
+#define STATUS_VMX_BIT         (1 << 12)
+#define STATUS_TMX_BIT         (1 << 13)
+#define STATUS_SMX_BIT         (1 << 14)
+#define STATUS_BR_BIT          (1 << 15)
+
+/* Interrupt mask bits */
+#define CONFIG_ALRT_BIT_ENBL	(1 << 2)
+
+#define VFSOC0_LOCK		0x0000
+#define VFSOC0_UNLOCK		0x0080
+#define MODEL_UNLOCK1	0X0059
+#define MODEL_UNLOCK2	0X00C4
+#define MODEL_LOCK1		0X0000
+#define MODEL_LOCK2		0X0000
+
+#define dQ_ACC_DIV	0x4
+#define dP_ACC_100	0x1900
+#define dP_ACC_200	0x3200
+
+#define MAX17042_VMAX_TOLERANCE		50 /* 50 mV */
+
+struct max17042_chip {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct power_supply *battery;
+	enum max170xx_chip_type chip_type;
+	struct max17042_platform_data *pdata;
+	struct work_struct work;
+	int    init_complete;
+};
+
+static enum power_supply_property max17042_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_TEMP_MIN,
+	POWER_SUPPLY_PROP_TEMP_MAX,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	// these two have to be at the end on the list
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+};
+
+static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
+{
+	int ret;
+	u32 data;
+	struct regmap *map = chip->regmap;
+
+	ret = regmap_read(map, MAX17042_TEMP, &data);
+	if (ret < 0)
+		return ret;
+
+	*temp = sign_extend32(data, 15);
+	/* The value is converted into deci-centigrade scale */
+	/* Units of LSB = 1 / 256 degree Celsius */
+	*temp = *temp * 10 / 256;
+	return 0;
+}
+
+static int max17042_get_status(struct max17042_chip *chip, int *status)
+{
+	int ret, charge_full, charge_now;
+	int avg_current;
+	u32 data;
+
+	ret = power_supply_am_i_supplied(chip->battery);
+	if (ret < 0) {
+		*status = POWER_SUPPLY_STATUS_UNKNOWN;
+		return 0;
+	}
+	if (ret == 0) {
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	/*
+	 * The MAX170xx has builtin end-of-charge detection and will update
+	 * FullCAP to match RepCap when it detects end of charging.
+	 *
+	 * When this cycle the battery gets charged to a higher (calculated)
+	 * capacity then the previous cycle then FullCAP will get updated
+	 * continuously once end-of-charge detection kicks in, so allow the
+	 * 2 to differ a bit.
+	 */
+
+	ret = regmap_read(chip->regmap, MAX17042_FullCAP, &charge_full);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(chip->regmap, MAX17042_RepCap, &charge_now);
+	if (ret < 0)
+		return ret;
+
+	if ((charge_full - charge_now) <= MAX17042_FULL_THRESHOLD) {
+		*status = POWER_SUPPLY_STATUS_FULL;
+		return 0;
+	}
+
+	/*
+	 * Even though we are supplied, we may still be discharging if the
+	 * supply is e.g. only delivering 5V 0.5A. Check current if available.
+	 */
+	if (!chip->pdata->enable_current_sense) {
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+		return 0;
+	}
+
+	ret = regmap_read(chip->regmap, MAX17042_AvgCurrent, &data);
+	if (ret < 0)
+		return ret;
+
+	avg_current = sign_extend32(data, 15);
+	avg_current *= 1562500 / chip->pdata->r_sns;
+
+	if (avg_current > 0)
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return 0;
+}
+
+static int max17042_get_battery_health(struct max17042_chip *chip, int *health)
+{
+	int temp, vavg, vbatt, ret;
+	u32 val;
+
+	ret = regmap_read(chip->regmap, MAX17042_AvgVCELL, &val);
+	if (ret < 0)
+		goto health_error;
+
+	/* bits [0-3] unused */
+	vavg = val * 625 / 8;
+	/* Convert to millivolts */
+	vavg /= 1000;
+
+	ret = regmap_read(chip->regmap, MAX17042_VCELL, &val);
+	if (ret < 0)
+		goto health_error;
+
+	/* bits [0-3] unused */
+	vbatt = val * 625 / 8;
+	/* Convert to millivolts */
+	vbatt /= 1000;
+
+	if (vavg < chip->pdata->vmin) {
+		*health = POWER_SUPPLY_HEALTH_DEAD;
+		goto out;
+	}
+
+	if (vbatt > chip->pdata->vmax + MAX17042_VMAX_TOLERANCE) {
+		*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		goto out;
+	}
+
+	ret = max17042_get_temperature(chip, &temp);
+	if (ret < 0)
+		goto health_error;
+
+	if (temp < chip->pdata->temp_min) {
+		*health = POWER_SUPPLY_HEALTH_COLD;
+		goto out;
+	}
+
+	if (temp > chip->pdata->temp_max) {
+		*health = POWER_SUPPLY_HEALTH_OVERHEAT;
+		goto out;
+	}
+
+	*health = POWER_SUPPLY_HEALTH_GOOD;
+
+out:
+	return 0;
+
+health_error:
+	return ret;
+}
+
+static int max17042_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max17042_chip *chip = power_supply_get_drvdata(psy);
+	struct regmap *map = chip->regmap;
+	int ret;
+	u32 data;
+	u64 data64;
+
+	if (!chip->init_complete)
+		return -EAGAIN;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max17042_get_status(chip, &val->intval);
+		if (ret < 0)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = regmap_read(map, MAX17042_STATUS, &data);
+		if (ret < 0)
+			return ret;
+
+		if (data & MAX17042_STATUS_BattAbsent)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		ret = regmap_read(map, MAX17042_Cycles, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		ret = regmap_read(map, MAX17042_MinMaxVolt, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data >> 8;
+		val->intval *= 20000; /* Units of LSB = 20mV */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		ret = regmap_read(map, MAX17042_MinMaxVolt, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = (data & 0xff) * 20000; /* Units of 20mV */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
+			ret = regmap_read(map, MAX17042_V_empty, &data);
+		else
+			ret = regmap_read(map, MAX17047_V_empty, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data >> 7;
+		val->intval *= 10000; /* Units of LSB = 10mV */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = regmap_read(map, MAX17042_VCELL, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data * 625 / 8;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = regmap_read(map, MAX17042_AvgVCELL, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data * 625 / 8;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		ret = regmap_read(map, MAX17042_OCVInternal, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data * 625 / 8;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		if (chip->pdata->enable_current_sense)
+			ret = regmap_read(map, MAX17042_RepSOC, &data);
+		else
+			ret = regmap_read(map, MAX17042_VFSOC, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data >> 8;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = regmap_read(map, MAX17042_DesignCap, &data);
+		if (ret < 0)
+			return ret;
+
+		data64 = data * 5000000ll;
+		do_div(data64, chip->pdata->r_sns);
+		val->intval = data64;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = regmap_read(map, MAX17042_FullCAP, &data);
+		if (ret < 0)
+			return ret;
+
+		data64 = data * 5000000ll;
+		do_div(data64, chip->pdata->r_sns);
+		val->intval = data64;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = regmap_read(map, MAX17042_RepCap, &data);
+		if (ret < 0)
+			return ret;
+
+		data64 = data * 5000000ll;
+		do_div(data64, chip->pdata->r_sns);
+		val->intval = data64;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = regmap_read(map, MAX17042_QH, &data);
+		if (ret < 0)
+			return ret;
+
+		data64 = sign_extend64(data, 15) * 5000000ll;
+		val->intval = div_s64(data64, chip->pdata->r_sns);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = max17042_get_temperature(chip, &val->intval);
+		if (ret < 0)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+		ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+		if (ret < 0)
+			return ret;
+		/* LSB is Alert Minimum. In deci-centigrade */
+		val->intval = sign_extend32(data & 0xff, 7) * 10;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+		if (ret < 0)
+			return ret;
+		/* MSB is Alert Maximum. In deci-centigrade */
+		val->intval = sign_extend32(data >> 8, 7) * 10;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_MIN:
+		val->intval = chip->pdata->temp_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_MAX:
+		val->intval = chip->pdata->temp_max;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = max17042_get_battery_health(chip, &val->intval);
+		if (ret < 0)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (chip->pdata->enable_current_sense) {
+			ret = regmap_read(map, MAX17042_Current, &data);
+			if (ret < 0)
+				return ret;
+
+			data64 = sign_extend64(data, 15) * 1562500ll;
+			val->intval = div_s64(data64, chip->pdata->r_sns);
+		} else {
+			return -EINVAL;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		if (chip->pdata->enable_current_sense) {
+			ret = regmap_read(map, MAX17042_AvgCurrent, &data);
+			if (ret < 0)
+				return ret;
+
+			data64 = sign_extend64(data, 15) * 1562500ll;
+			val->intval = div_s64(data64, chip->pdata->r_sns);
+		} else {
+			return -EINVAL;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = regmap_read(map, MAX17042_ICHGTerm, &data);
+		if (ret < 0)
+			return ret;
+
+		data64 = data * 1562500ll;
+		val->intval = div_s64(data64, chip->pdata->r_sns);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		ret = regmap_read(map, MAX17042_TTE, &data);
+		if (ret < 0)
+			return ret;
+
+		val->intval = data * 5625 / 1000;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int max17042_set_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    const union power_supply_propval *val)
+{
+	struct max17042_chip *chip = power_supply_get_drvdata(psy);
+	struct regmap *map = chip->regmap;
+	int ret = 0;
+	u32 data;
+	int8_t temp;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+		ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+		if (ret < 0)
+			return ret;
+
+		/* Input in deci-centigrade, convert to centigrade */
+		temp = val->intval / 10;
+		/* force min < max */
+		if (temp >= (int8_t)(data >> 8))
+			temp = (int8_t)(data >> 8) - 1;
+		/* Write both MAX and MIN ALERT */
+		data = (data & 0xff00) + temp;
+		ret = regmap_write(map, MAX17042_TALRT_Th, data);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+		if (ret < 0)
+			return ret;
+
+		/* Input in Deci-Centigrade, convert to centigrade */
+		temp = val->intval / 10;
+		/* force max > min */
+		if (temp <= (int8_t)(data & 0xff))
+			temp = (int8_t)(data & 0xff) + 1;
+		/* Write both MAX and MIN ALERT */
+		data = (data & 0xff) + (temp << 8);
+		ret = regmap_write(map, MAX17042_TALRT_Th, data);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int max17042_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static void max17042_external_power_changed(struct power_supply *psy)
+{
+	power_supply_changed(psy);
+}
+
+static int max17042_write_verify_reg(struct regmap *map, u8 reg, u32 value)
+{
+	int retries = 8;
+	int ret;
+	u32 read_value;
+
+	do {
+		ret = regmap_write(map, reg, value);
+		regmap_read(map, reg, &read_value);
+		if (read_value != value) {
+			ret = -EIO;
+			retries--;
+		}
+	} while (retries && read_value != value);
+
+	if (ret < 0)
+		pr_err("%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static inline void max17042_override_por(struct regmap *map,
+					 u8 reg, u16 value)
+{
+	if (value)
+		regmap_write(map, reg, value);
+}
+
+static inline void max17042_unlock_model(struct max17042_chip *chip)
+{
+	struct regmap *map = chip->regmap;
+
+	regmap_write(map, MAX17042_MLOCKReg1, MODEL_UNLOCK1);
+	regmap_write(map, MAX17042_MLOCKReg2, MODEL_UNLOCK2);
+}
+
+static inline void max17042_lock_model(struct max17042_chip *chip)
+{
+	struct regmap *map = chip->regmap;
+
+	regmap_write(map, MAX17042_MLOCKReg1, MODEL_LOCK1);
+	regmap_write(map, MAX17042_MLOCKReg2, MODEL_LOCK2);
+}
+
+static inline void max17042_write_model_data(struct max17042_chip *chip,
+					u8 addr, int size)
+{
+	struct regmap *map = chip->regmap;
+	int i;
+
+	for (i = 0; i < size; i++)
+		regmap_write(map, addr + i,
+			chip->pdata->config_data->cell_char_tbl[i]);
+}
+
+static inline void max17042_read_model_data(struct max17042_chip *chip,
+					u8 addr, u16 *data, int size)
+{
+	struct regmap *map = chip->regmap;
+	int i;
+	u32 tmp;
+
+	for (i = 0; i < size; i++) {
+		regmap_read(map, addr + i, &tmp);
+		data[i] = (u16)tmp;
+	}
+}
+
+static inline int max17042_model_data_compare(struct max17042_chip *chip,
+					u16 *data1, u16 *data2, int size)
+{
+	int i;
+
+	if (memcmp(data1, data2, size)) {
+		dev_err(&chip->client->dev, "%s compare failed\n", __func__);
+		for (i = 0; i < size; i++)
+			dev_info(&chip->client->dev, "0x%x, 0x%x",
+				data1[i], data2[i]);
+		dev_info(&chip->client->dev, "\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int max17042_init_model(struct max17042_chip *chip)
+{
+	int ret;
+	int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl);
+	u16 *temp_data;
+
+	temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL);
+	if (!temp_data)
+		return -ENOMEM;
+
+	max17042_unlock_model(chip);
+	max17042_write_model_data(chip, MAX17042_MODELChrTbl,
+				table_size);
+	max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data,
+				table_size);
+
+	ret = max17042_model_data_compare(
+		chip,
+		chip->pdata->config_data->cell_char_tbl,
+		temp_data,
+		table_size);
+
+	max17042_lock_model(chip);
+	kfree(temp_data);
+
+	return ret;
+}
+
+static int max17042_verify_model_lock(struct max17042_chip *chip)
+{
+	int i;
+	int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl);
+	u16 *temp_data;
+	int ret = 0;
+
+	temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL);
+	if (!temp_data)
+		return -ENOMEM;
+
+	max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data,
+				table_size);
+	for (i = 0; i < table_size; i++)
+		if (temp_data[i])
+			ret = -EINVAL;
+
+	kfree(temp_data);
+	return ret;
+}
+
+static void max17042_write_config_regs(struct max17042_chip *chip)
+{
+	struct max17042_config_data *config = chip->pdata->config_data;
+	struct regmap *map = chip->regmap;
+
+	regmap_write(map, MAX17042_CONFIG, config->config);
+	regmap_write(map, MAX17042_LearnCFG, config->learn_cfg);
+	regmap_write(map, MAX17042_FilterCFG,
+			config->filter_cfg);
+	regmap_write(map, MAX17042_RelaxCFG, config->relax_cfg);
+	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047 ||
+			chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050 ||
+			chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+		regmap_write(map, MAX17047_FullSOCThr,
+						config->full_soc_thresh);
+}
+
+static void  max17042_write_custom_regs(struct max17042_chip *chip)
+{
+	struct max17042_config_data *config = chip->pdata->config_data;
+	struct regmap *map = chip->regmap;
+
+	max17042_write_verify_reg(map, MAX17042_RCOMP0, config->rcomp0);
+	max17042_write_verify_reg(map, MAX17042_TempCo,	config->tcompc0);
+	max17042_write_verify_reg(map, MAX17042_ICHGTerm, config->ichgt_term);
+	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) {
+		regmap_write(map, MAX17042_EmptyTempCo,	config->empty_tempco);
+		max17042_write_verify_reg(map, MAX17042_K_empty0,
+					config->kempty0);
+	} else {
+		max17042_write_verify_reg(map, MAX17047_QRTbl00,
+						config->qrtbl00);
+		max17042_write_verify_reg(map, MAX17047_QRTbl10,
+						config->qrtbl10);
+		max17042_write_verify_reg(map, MAX17047_QRTbl20,
+						config->qrtbl20);
+		max17042_write_verify_reg(map, MAX17047_QRTbl30,
+						config->qrtbl30);
+	}
+}
+
+static void max17042_update_capacity_regs(struct max17042_chip *chip)
+{
+	struct max17042_config_data *config = chip->pdata->config_data;
+	struct regmap *map = chip->regmap;
+
+	max17042_write_verify_reg(map, MAX17042_FullCAP,
+				config->fullcap);
+	regmap_write(map, MAX17042_DesignCap, config->design_cap);
+	max17042_write_verify_reg(map, MAX17042_FullCAPNom,
+				config->fullcapnom);
+}
+
+static void max17042_reset_vfsoc0_reg(struct max17042_chip *chip)
+{
+	unsigned int vfSoc;
+	struct regmap *map = chip->regmap;
+
+	regmap_read(map, MAX17042_VFSOC, &vfSoc);
+	regmap_write(map, MAX17042_VFSOC0Enable, VFSOC0_UNLOCK);
+	max17042_write_verify_reg(map, MAX17042_VFSOC0, vfSoc);
+	regmap_write(map, MAX17042_VFSOC0Enable, VFSOC0_LOCK);
+}
+
+static void max17042_load_new_capacity_params(struct max17042_chip *chip)
+{
+	u32 full_cap0, rep_cap, dq_acc, vfSoc;
+	u32 rem_cap;
+
+	struct max17042_config_data *config = chip->pdata->config_data;
+	struct regmap *map = chip->regmap;
+
+	regmap_read(map, MAX17042_FullCAP0, &full_cap0);
+	regmap_read(map, MAX17042_VFSOC, &vfSoc);
+
+	/* fg_vfSoc needs to shifted by 8 bits to get the
+	 * perc in 1% accuracy, to get the right rem_cap multiply
+	 * full_cap0, fg_vfSoc and devide by 100
+	 */
+	rem_cap = ((vfSoc >> 8) * full_cap0) / 100;
+	max17042_write_verify_reg(map, MAX17042_RemCap, rem_cap);
+
+	rep_cap = rem_cap;
+	max17042_write_verify_reg(map, MAX17042_RepCap, rep_cap);
+
+	/* Write dQ_acc to 200% of Capacity and dP_acc to 200% */
+	dq_acc = config->fullcap / dQ_ACC_DIV;
+	max17042_write_verify_reg(map, MAX17042_dQacc, dq_acc);
+	max17042_write_verify_reg(map, MAX17042_dPacc, dP_ACC_200);
+
+	max17042_write_verify_reg(map, MAX17042_FullCAP,
+			config->fullcap);
+	regmap_write(map, MAX17042_DesignCap,
+			config->design_cap);
+	max17042_write_verify_reg(map, MAX17042_FullCAPNom,
+			config->fullcapnom);
+	/* Update SOC register with new SOC */
+	regmap_write(map, MAX17042_RepSOC, vfSoc);
+}
+
+/*
+ * Block write all the override values coming from platform data.
+ * This function MUST be called before the POR initialization procedure
+ * specified by maxim.
+ */
+static inline void max17042_override_por_values(struct max17042_chip *chip)
+{
+	struct regmap *map = chip->regmap;
+	struct max17042_config_data *config = chip->pdata->config_data;
+
+	max17042_override_por(map, MAX17042_TGAIN, config->tgain);
+	max17042_override_por(map, MAX17042_TOFF, config->toff);
+	max17042_override_por(map, MAX17042_CGAIN, config->cgain);
+	max17042_override_por(map, MAX17042_COFF, config->coff);
+
+	max17042_override_por(map, MAX17042_VALRT_Th, config->valrt_thresh);
+	max17042_override_por(map, MAX17042_TALRT_Th, config->talrt_thresh);
+	max17042_override_por(map, MAX17042_SALRT_Th,
+						config->soc_alrt_thresh);
+	max17042_override_por(map, MAX17042_CONFIG, config->config);
+	max17042_override_por(map, MAX17042_SHDNTIMER, config->shdntimer);
+
+	max17042_override_por(map, MAX17042_DesignCap, config->design_cap);
+	max17042_override_por(map, MAX17042_ICHGTerm, config->ichgt_term);
+
+	max17042_override_por(map, MAX17042_AtRate, config->at_rate);
+	max17042_override_por(map, MAX17042_LearnCFG, config->learn_cfg);
+	max17042_override_por(map, MAX17042_FilterCFG, config->filter_cfg);
+	max17042_override_por(map, MAX17042_RelaxCFG, config->relax_cfg);
+	max17042_override_por(map, MAX17042_MiscCFG, config->misc_cfg);
+
+	max17042_override_por(map, MAX17042_FullCAP, config->fullcap);
+	max17042_override_por(map, MAX17042_FullCAPNom, config->fullcapnom);
+	max17042_override_por(map, MAX17042_dQacc, config->dqacc);
+	max17042_override_por(map, MAX17042_dPacc, config->dpacc);
+
+	max17042_override_por(map, MAX17042_RCOMP0, config->rcomp0);
+	max17042_override_por(map, MAX17042_TempCo, config->tcompc0);
+
+	if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) {
+		max17042_override_por(map, MAX17042_MaskSOC, config->masksoc);
+		max17042_override_por(map, MAX17042_SOC_empty, config->socempty);
+		max17042_override_por(map, MAX17042_V_empty, config->vempty);
+		max17042_override_por(map, MAX17042_EmptyTempCo, config->empty_tempco);
+		max17042_override_por(map, MAX17042_K_empty0, config->kempty0);
+	}
+
+	if ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050)) {
+		max17042_override_por(map, MAX17042_IAvg_empty, config->iavg_empty);
+		max17042_override_por(map, MAX17042_TempNom, config->temp_nom);
+		max17042_override_por(map, MAX17042_TempLim, config->temp_lim);
+		max17042_override_por(map, MAX17042_FCTC, config->fctc);
+	}
+
+	if ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)) {
+		max17042_override_por(map, MAX17047_V_empty, config->vempty);
+	}
+}
+
+static int max17042_init_chip(struct max17042_chip *chip)
+{
+	struct regmap *map = chip->regmap;
+	int ret;
+
+	max17042_override_por_values(chip);
+	/* After Power up, the MAX17042 requires 500mS in order
+	 * to perform signal debouncing and initial SOC reporting
+	 */
+	msleep(500);
+
+	/* Initialize configuration */
+	max17042_write_config_regs(chip);
+
+	/* write cell characterization data */
+	ret = max17042_init_model(chip);
+	if (ret) {
+		dev_err(&chip->client->dev, "%s init failed\n",
+			__func__);
+		return -EIO;
+	}
+
+	ret = max17042_verify_model_lock(chip);
+	if (ret) {
+		dev_err(&chip->client->dev, "%s lock verify failed\n",
+			__func__);
+		return -EIO;
+	}
+	/* write custom parameters */
+	max17042_write_custom_regs(chip);
+
+	/* update capacity params */
+	max17042_update_capacity_regs(chip);
+
+	/* delay must be atleast 350mS to allow VFSOC
+	 * to be calculated from the new configuration
+	 */
+	msleep(350);
+
+	/* reset vfsoc0 reg */
+	max17042_reset_vfsoc0_reg(chip);
+
+	/* load new capacity params */
+	max17042_load_new_capacity_params(chip);
+
+	/* Init complete, Clear the POR bit */
+	regmap_update_bits(map, MAX17042_STATUS, STATUS_POR_BIT, 0x0);
+	return 0;
+}
+
+static void max17042_set_soc_threshold(struct max17042_chip *chip, u16 off)
+{
+	struct regmap *map = chip->regmap;
+	u32 soc, soc_tr;
+
+	/* program interrupt thresholds such that we should
+	 * get interrupt for every 'off' perc change in the soc
+	 */
+	regmap_read(map, MAX17042_RepSOC, &soc);
+	soc >>= 8;
+	soc_tr = (soc + off) << 8;
+	if (off < soc)
+		soc_tr |= soc - off;
+	regmap_write(map, MAX17042_SALRT_Th, soc_tr);
+}
+
+static irqreturn_t max17042_thread_handler(int id, void *dev)
+{
+	struct max17042_chip *chip = dev;
+	u32 val;
+	int ret;
+
+	ret = regmap_read(chip->regmap, MAX17042_STATUS, &val);
+	if (ret)
+		return IRQ_HANDLED;
+
+	if ((val & STATUS_SMN_BIT) || (val & STATUS_SMX_BIT)) {
+		dev_dbg(&chip->client->dev, "SOC threshold INTR\n");
+		max17042_set_soc_threshold(chip, 1);
+	}
+
+	/* we implicitly handle all alerts via power_supply_changed */
+	regmap_clear_bits(chip->regmap, MAX17042_STATUS,
+			  0xFFFF & ~(STATUS_POR_BIT | STATUS_BST_BIT));
+
+	power_supply_changed(chip->battery);
+	return IRQ_HANDLED;
+}
+
+static void max17042_init_worker(struct work_struct *work)
+{
+	struct max17042_chip *chip = container_of(work,
+				struct max17042_chip, work);
+	int ret;
+
+	/* Initialize registers according to values from the platform data */
+	if (chip->pdata->enable_por_init && chip->pdata->config_data) {
+		ret = max17042_init_chip(chip);
+		if (ret)
+			return;
+	}
+
+	chip->init_complete = 1;
+}
+
+#ifdef CONFIG_OF
+static struct max17042_platform_data *
+max17042_get_of_pdata(struct max17042_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	struct device_node *np = dev->of_node;
+	u32 prop;
+	struct max17042_platform_data *pdata;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	/*
+	 * Require current sense resistor value to be specified for
+	 * current-sense functionality to be enabled at all.
+	 */
+	if (of_property_read_u32(np, "maxim,rsns-microohm", &prop) == 0) {
+		pdata->r_sns = prop;
+		pdata->enable_current_sense = true;
+	}
+
+	if (of_property_read_s32(np, "maxim,cold-temp", &pdata->temp_min))
+		pdata->temp_min = INT_MIN;
+	if (of_property_read_s32(np, "maxim,over-heat-temp", &pdata->temp_max))
+		pdata->temp_max = INT_MAX;
+	if (of_property_read_s32(np, "maxim,dead-volt", &pdata->vmin))
+		pdata->vmin = INT_MIN;
+	if (of_property_read_s32(np, "maxim,over-volt", &pdata->vmax))
+		pdata->vmax = INT_MAX;
+
+	return pdata;
+}
+#endif
+
+static struct max17042_reg_data max17047_default_pdata_init_regs[] = {
+	/*
+	 * Some firmwares do not set FullSOCThr, Enable End-of-Charge Detection
+	 * when the voltage FG reports 95%, as recommended in the datasheet.
+	 */
+	{ MAX17047_FullSOCThr, MAX17042_BATTERY_FULL << 8 },
+};
+
+static struct max17042_platform_data *
+max17042_get_default_pdata(struct max17042_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	struct max17042_platform_data *pdata;
+	int ret, misc_cfg;
+
+	/*
+	 * The MAX17047 gets used on x86 where we might not have pdata, assume
+	 * the firmware will already have initialized the fuel-gauge and provide
+	 * default values for the non init bits to make things work.
+	 */
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return pdata;
+
+	if ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+	    (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050)) {
+		pdata->init_data = max17047_default_pdata_init_regs;
+		pdata->num_init_data =
+			ARRAY_SIZE(max17047_default_pdata_init_regs);
+	}
+
+	ret = regmap_read(chip->regmap, MAX17042_MiscCFG, &misc_cfg);
+	if (ret < 0)
+		return NULL;
+
+	/* If bits 0-1 are set to 3 then only Voltage readings are used */
+	if ((misc_cfg & 0x3) == 0x3)
+		pdata->enable_current_sense = false;
+	else
+		pdata->enable_current_sense = true;
+
+	pdata->vmin = MAX17042_DEFAULT_VMIN;
+	pdata->vmax = MAX17042_DEFAULT_VMAX;
+	pdata->temp_min = MAX17042_DEFAULT_TEMP_MIN;
+	pdata->temp_max = MAX17042_DEFAULT_TEMP_MAX;
+
+	return pdata;
+}
+
+static struct max17042_platform_data *
+max17042_get_pdata(struct max17042_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+
+#ifdef CONFIG_OF
+	if (dev->of_node)
+		return max17042_get_of_pdata(chip);
+#endif
+	if (dev->platform_data)
+		return dev->platform_data;
+
+	return max17042_get_default_pdata(chip);
+}
+
+static const struct regmap_config max17042_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+
+static const struct power_supply_desc max17042_psy_desc = {
+	.name		= "max170xx_battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= max17042_get_property,
+	.set_property	= max17042_set_property,
+	.property_is_writeable	= max17042_property_is_writeable,
+	.external_power_changed	= max17042_external_power_changed,
+	.properties	= max17042_battery_props,
+	.num_properties	= ARRAY_SIZE(max17042_battery_props),
+};
+
+static const struct power_supply_desc max17042_no_current_sense_psy_desc = {
+	.name		= "max170xx_battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= max17042_get_property,
+	.set_property	= max17042_set_property,
+	.property_is_writeable	= max17042_property_is_writeable,
+	.properties	= max17042_battery_props,
+	.num_properties	= ARRAY_SIZE(max17042_battery_props) - 2,
+};
+
+static int max17042_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
+	struct power_supply_config psy_cfg = {};
+	const struct acpi_device_id *acpi_id = NULL;
+	struct device *dev = &client->dev;
+	struct max17042_chip *chip;
+	int ret;
+	int i;
+	u32 val;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EIO;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	if (id) {
+		chip->chip_type = id->driver_data;
+	} else {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id)
+			return -ENODEV;
+
+		chip->chip_type = acpi_id->driver_data;
+	}
+	chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		dev_err(&client->dev, "Failed to initialize regmap\n");
+		return -EINVAL;
+	}
+
+	chip->pdata = max17042_get_pdata(chip);
+	if (!chip->pdata) {
+		dev_err(&client->dev, "no platform data provided\n");
+		return -EINVAL;
+	}
+
+	i2c_set_clientdata(client, chip);
+	psy_cfg.drv_data = chip;
+	psy_cfg.of_node = dev->of_node;
+
+	/* When current is not measured,
+	 * CURRENT_NOW and CURRENT_AVG properties should be invisible. */
+	if (!chip->pdata->enable_current_sense)
+		max17042_desc = &max17042_no_current_sense_psy_desc;
+
+	if (chip->pdata->r_sns == 0)
+		chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR;
+
+	if (chip->pdata->init_data)
+		for (i = 0; i < chip->pdata->num_init_data; i++)
+			regmap_write(chip->regmap,
+					chip->pdata->init_data[i].addr,
+					chip->pdata->init_data[i].data);
+
+	if (!chip->pdata->enable_current_sense) {
+		regmap_write(chip->regmap, MAX17042_CGAIN, 0x0000);
+		regmap_write(chip->regmap, MAX17042_MiscCFG, 0x0003);
+		regmap_write(chip->regmap, MAX17042_LearnCFG, 0x0007);
+	}
+
+	chip->battery = devm_power_supply_register(&client->dev, max17042_desc,
+						   &psy_cfg);
+	if (IS_ERR(chip->battery)) {
+		dev_err(&client->dev, "failed: power supply register\n");
+		return PTR_ERR(chip->battery);
+	}
+
+	if (client->irq) {
+		unsigned int flags = IRQF_ONESHOT;
+
+		/*
+		 * On ACPI systems the IRQ may be handled by ACPI-event code,
+		 * so we need to share (if the ACPI code is willing to share).
+		 */
+		if (acpi_id)
+			flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
+
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL,
+						max17042_thread_handler, flags,
+						chip->battery->desc->name,
+						chip);
+		if (!ret) {
+			regmap_update_bits(chip->regmap, MAX17042_CONFIG,
+					CONFIG_ALRT_BIT_ENBL,
+					CONFIG_ALRT_BIT_ENBL);
+			max17042_set_soc_threshold(chip, 1);
+		} else {
+			client->irq = 0;
+			if (ret != -EBUSY)
+				dev_err(&client->dev, "Failed to get IRQ\n");
+		}
+	}
+	/* Not able to update the charge threshold when exceeded? -> disable */
+	if (!client->irq)
+		regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
+
+	regmap_read(chip->regmap, MAX17042_STATUS, &val);
+	if (val & STATUS_POR_BIT) {
+		ret = devm_work_autocancel(&client->dev, &chip->work,
+					   max17042_init_worker);
+		if (ret)
+			return ret;
+		schedule_work(&chip->work);
+	} else {
+		chip->init_complete = 1;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max17042_suspend(struct device *dev)
+{
+	struct max17042_chip *chip = dev_get_drvdata(dev);
+
+	/*
+	 * disable the irq and enable irq_wake
+	 * capability to the interrupt line.
+	 */
+	if (chip->client->irq) {
+		disable_irq(chip->client->irq);
+		enable_irq_wake(chip->client->irq);
+	}
+
+	return 0;
+}
+
+static int max17042_resume(struct device *dev)
+{
+	struct max17042_chip *chip = dev_get_drvdata(dev);
+
+	if (chip->client->irq) {
+		disable_irq_wake(chip->client->irq);
+		enable_irq(chip->client->irq);
+		/* re-program the SOC thresholds to 1% change */
+		max17042_set_soc_threshold(chip, 1);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
+			max17042_resume);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max17042_acpi_match[] = {
+	{ "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id max17042_dt_match[] = {
+	{ .compatible = "maxim,max17042" },
+	{ .compatible = "maxim,max17047" },
+	{ .compatible = "maxim,max17050" },
+	{ .compatible = "maxim,max17055" },
+	{ .compatible = "maxim,max77849-battery" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max17042_dt_match);
+#endif
+
+static const struct i2c_device_id max17042_id[] = {
+	{ "max17042", MAXIM_DEVICE_TYPE_MAX17042 },
+	{ "max17047", MAXIM_DEVICE_TYPE_MAX17047 },
+	{ "max17050", MAXIM_DEVICE_TYPE_MAX17050 },
+	{ "max17055", MAXIM_DEVICE_TYPE_MAX17055 },
+	{ "max77849-battery", MAXIM_DEVICE_TYPE_MAX17047 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max17042_id);
+
+static struct i2c_driver max17042_i2c_driver = {
+	.driver	= {
+		.name	= "max17042",
+		.acpi_match_table = ACPI_PTR(max17042_acpi_match),
+		.of_match_table = of_match_ptr(max17042_dt_match),
+		.pm	= &max17042_pm_ops,
+	},
+	.probe		= max17042_probe,
+	.id_table	= max17042_id,
+};
+module_i2c_driver(max17042_i2c_driver);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("MAX17042 Fuel Gauge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max1721x_battery.c b/drivers/power/supply/max1721x_battery.c
new file mode 100644
index 000000000..d8d52e09d
--- /dev/null
+++ b/drivers/power/supply/max1721x_battery.c
@@ -0,0 +1,448 @@
+/*
+ * 1-Wire implementation for Maxim Semiconductor
+ * MAX7211/MAX17215 standalone fuel gauge chip
+ *
+ * Copyright (C) 2017 Radioavionica Corporation
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/w1.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+#define W1_MAX1721X_FAMILY_ID		0x26
+#define DEF_DEV_NAME_MAX17211		"MAX17211"
+#define DEF_DEV_NAME_MAX17215		"MAX17215"
+#define DEF_DEV_NAME_UNKNOWN		"UNKNOWN"
+#define DEF_MFG_NAME			"MAXIM"
+
+#define PSY_MAX_NAME_LEN	32
+
+/* Number of valid register addresses in W1 mode */
+#define MAX1721X_MAX_REG_NR	0x1EF
+
+/* Factory settings (nonvolatile registers) (W1 specific) */
+#define MAX1721X_REG_NRSENSE	0x1CF	/* RSense in 10^-5 Ohm */
+/* Strings */
+#define MAX1721X_REG_MFG_STR	0x1CC
+#define MAX1721X_REG_MFG_NUMB	3
+#define MAX1721X_REG_DEV_STR	0x1DB
+#define MAX1721X_REG_DEV_NUMB	5
+/* HEX Strings */
+#define MAX1721X_REG_SER_HEX	0x1D8
+
+/* MAX172XX Output Registers for W1 chips */
+#define MAX172XX_REG_STATUS	0x000	/* status reg */
+#define MAX172XX_BAT_PRESENT	(1<<4)	/* battery connected bit */
+#define MAX172XX_REG_DEVNAME	0x021	/* chip config */
+#define MAX172XX_DEV_MASK	0x000F	/* chip type mask */
+#define MAX172X1_DEV		0x0001
+#define MAX172X5_DEV		0x0005
+#define MAX172XX_REG_TEMP	0x008	/* Temperature */
+#define MAX172XX_REG_BATT	0x0DA	/* Battery voltage */
+#define MAX172XX_REG_CURRENT	0x00A	/* Actual current */
+#define MAX172XX_REG_AVGCURRENT	0x00B	/* Average current */
+#define MAX172XX_REG_REPSOC	0x006	/* Percentage of charge */
+#define MAX172XX_REG_DESIGNCAP	0x018	/* Design capacity */
+#define MAX172XX_REG_REPCAP	0x005	/* Average capacity */
+#define MAX172XX_REG_TTE	0x011	/* Time to empty */
+#define MAX172XX_REG_TTF	0x020	/* Time to full */
+
+struct max17211_device_info {
+	char name[PSY_MAX_NAME_LEN];
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct device *w1_dev;
+	struct regmap *regmap;
+	/* battery design format */
+	unsigned int rsense; /* in tenths uOhm */
+	char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
+	char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
+	char SerialNumber[13]; /* see get_sn_str() later for comment */
+};
+
+/* Convert regs value to power_supply units */
+
+static inline int max172xx_time_to_ps(unsigned int reg)
+{
+	return reg * 5625 / 1000;	/* in sec. */
+}
+
+static inline int max172xx_percent_to_ps(unsigned int reg)
+{
+	return reg / 256;	/* in percent from 0 to 100 */
+}
+
+static inline int max172xx_voltage_to_ps(unsigned int reg)
+{
+	return reg * 1250;	/* in uV */
+}
+
+static inline int max172xx_capacity_to_ps(unsigned int reg)
+{
+	return reg * 500;	/* in uAh */
+}
+
+/*
+ * Current and temperature is signed values, so unsigned regs
+ * value must be converted to signed type
+ */
+
+static inline int max172xx_temperature_to_ps(unsigned int reg)
+{
+	int val = (int16_t)(reg);
+
+	return val * 10 / 256; /* in tenths of deg. C */
+}
+
+/*
+ * Calculating current registers resolution:
+ *
+ * RSense stored in 10^-5 Ohm, so measurement voltage must be
+ * in 10^-11 Volts for get current in uA.
+ * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
+ * So: 102400 / 65535 * 10^5 = 156252
+ */
+static inline int max172xx_current_to_voltage(unsigned int reg)
+{
+	int val = (int16_t)(reg);
+
+	return val * 156252;
+}
+
+
+static inline struct max17211_device_info *
+to_device_info(struct power_supply *psy)
+{
+	return power_supply_get_drvdata(psy);
+}
+
+static int max1721x_battery_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct max17211_device_info *info = to_device_info(psy);
+	unsigned int reg = 0;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		/*
+		 * POWER_SUPPLY_PROP_PRESENT will always readable via
+		 * sysfs interface. Value return 0 if battery not
+		 * present or unaccessible via W1.
+		 */
+		val->intval =
+			regmap_read(info->regmap, MAX172XX_REG_STATUS,
+			&reg) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, &reg);
+		val->intval = max172xx_percent_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = regmap_read(info->regmap, MAX172XX_REG_BATT, &reg);
+		val->intval = max172xx_voltage_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, &reg);
+		val->intval = max172xx_capacity_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, &reg);
+		val->intval = max172xx_capacity_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TTE, &reg);
+		val->intval = max172xx_time_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TTF, &reg);
+		val->intval = max172xx_time_to_ps(reg);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, &reg);
+		val->intval = max172xx_temperature_to_ps(reg);
+		break;
+	/* We need signed current, so must cast info->rsense to signed type */
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, &reg);
+		val->intval =
+			max172xx_current_to_voltage(reg) / (int)info->rsense;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, &reg);
+		val->intval =
+			max172xx_current_to_voltage(reg) / (int)info->rsense;
+		break;
+	/*
+	 * Strings already received and inited by probe.
+	 * We do dummy read for check battery still available.
+	 */
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, &reg);
+		val->strval = info->DeviceName;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, &reg);
+		val->strval = info->ManufacturerName;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &reg);
+		val->strval = info->SerialNumber;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property max1721x_battery_props[] = {
+	/* int */
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	/* strings */
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int get_string(struct max17211_device_info *info,
+			uint16_t reg, uint8_t nr, char *str)
+{
+	unsigned int val;
+
+	if (!str || !(reg == MAX1721X_REG_MFG_STR ||
+			reg == MAX1721X_REG_DEV_STR))
+		return -EFAULT;
+
+	while (nr--) {
+		if (regmap_read(info->regmap, reg++, &val))
+			return -EFAULT;
+		*str++ = val>>8 & 0x00FF;
+		*str++ = val & 0x00FF;
+	}
+	return 0;
+}
+
+/* Maxim say: Serial number is a hex string up to 12 hex characters */
+static int get_sn_string(struct max17211_device_info *info, char *str)
+{
+	unsigned int val[3];
+
+	if (!str)
+		return -EFAULT;
+
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
+		return -EFAULT;
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
+		return -EFAULT;
+	if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
+		return -EFAULT;
+
+	snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
+	return 0;
+}
+
+/*
+ * MAX1721x registers description for w1-regmap
+ */
+static const struct regmap_range max1721x_allow_range[] = {
+	regmap_reg_range(0, 0xDF),	/* volatile data */
+	regmap_reg_range(0x180, 0x1DF),	/* non-volatile memory */
+	regmap_reg_range(0x1E0, 0x1EF),	/* non-volatile history (unused) */
+};
+
+static const struct regmap_range max1721x_deny_range[] = {
+	/* volatile data unused registers */
+	regmap_reg_range(0x24, 0x26),
+	regmap_reg_range(0x30, 0x31),
+	regmap_reg_range(0x33, 0x34),
+	regmap_reg_range(0x37, 0x37),
+	regmap_reg_range(0x3B, 0x3C),
+	regmap_reg_range(0x40, 0x41),
+	regmap_reg_range(0x43, 0x44),
+	regmap_reg_range(0x47, 0x49),
+	regmap_reg_range(0x4B, 0x4C),
+	regmap_reg_range(0x4E, 0xAF),
+	regmap_reg_range(0xB1, 0xB3),
+	regmap_reg_range(0xB5, 0xB7),
+	regmap_reg_range(0xBF, 0xD0),
+	regmap_reg_range(0xDB, 0xDB),
+	/* hole between volatile and non-volatile registers */
+	regmap_reg_range(0xE0, 0x17F),
+};
+
+static const struct regmap_access_table max1721x_regs = {
+	.yes_ranges	= max1721x_allow_range,
+	.n_yes_ranges	= ARRAY_SIZE(max1721x_allow_range),
+	.no_ranges	= max1721x_deny_range,
+	.n_no_ranges	= ARRAY_SIZE(max1721x_deny_range),
+};
+
+/*
+ * Model Gauge M5 Algorithm output register
+ * Volatile data (must not be cached)
+ */
+static const struct regmap_range max1721x_volatile_allow[] = {
+	regmap_reg_range(0, 0xDF),
+};
+
+static const struct regmap_access_table max1721x_volatile_regs = {
+	.yes_ranges	= max1721x_volatile_allow,
+	.n_yes_ranges	= ARRAY_SIZE(max1721x_volatile_allow),
+};
+
+/*
+ * W1-regmap config
+ */
+static const struct regmap_config max1721x_regmap_w1_config = {
+	.reg_bits = 16,
+	.val_bits = 16,
+	.rd_table = &max1721x_regs,
+	.volatile_table = &max1721x_volatile_regs,
+	.max_register = MAX1721X_MAX_REG_NR,
+};
+
+static int devm_w1_max1721x_add_device(struct w1_slave *sl)
+{
+	struct power_supply_config psy_cfg = {};
+	struct max17211_device_info *info;
+
+	info = devm_kzalloc(&sl->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	sl->family_data = (void *)info;
+	info->w1_dev = &sl->dev;
+
+	/*
+	 * power_supply class battery name translated from W1 slave device
+	 * unique ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+	 * so, 26 (device family) correspond to max1721x devices.
+	 * Device name still unique for any number of connected devices.
+	 */
+	snprintf(info->name, sizeof(info->name),
+		"max1721x-%012X", (unsigned int)sl->reg_num.id);
+	info->bat_desc.name = info->name;
+
+	/*
+	 * FixMe: battery device name exceed max len for thermal_zone device
+	 * name and translation to thermal_zone must be disabled.
+	 */
+	info->bat_desc.no_thermal = true;
+	info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->bat_desc.properties = max1721x_battery_props;
+	info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
+	info->bat_desc.get_property = max1721x_battery_get_property;
+	psy_cfg.drv_data = info;
+
+	/* regmap init */
+	info->regmap = devm_regmap_init_w1(info->w1_dev,
+					&max1721x_regmap_w1_config);
+	if (IS_ERR(info->regmap)) {
+		int err = PTR_ERR(info->regmap);
+
+		dev_err(info->w1_dev, "Failed to allocate register map: %d\n",
+			err);
+		return err;
+	}
+
+	/* rsense init */
+	info->rsense = 0;
+	if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense)) {
+		dev_err(info->w1_dev, "Can't read RSense. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	if (!info->rsense) {
+		dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
+		info->rsense = 1000; /* in regs in 10^-5 */
+	}
+	dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
+
+	if (get_string(info, MAX1721X_REG_MFG_STR,
+			MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
+		dev_err(info->w1_dev, "Can't read manufacturer. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	if (!info->ManufacturerName[0])
+		strncpy(info->ManufacturerName, DEF_MFG_NAME,
+			2 * MAX1721X_REG_MFG_NUMB);
+
+	if (get_string(info, MAX1721X_REG_DEV_STR,
+			MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
+		dev_err(info->w1_dev, "Can't read device. Hardware error.\n");
+		return -ENODEV;
+	}
+	if (!info->DeviceName[0]) {
+		unsigned int dev_name;
+
+		if (regmap_read(info->regmap,
+				MAX172XX_REG_DEVNAME, &dev_name)) {
+			dev_err(info->w1_dev, "Can't read device name reg.\n");
+			return -ENODEV;
+		}
+
+		switch (dev_name & MAX172XX_DEV_MASK) {
+		case MAX172X1_DEV:
+			strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
+				2 * MAX1721X_REG_DEV_NUMB);
+			break;
+		case MAX172X5_DEV:
+			strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
+				2 * MAX1721X_REG_DEV_NUMB);
+			break;
+		default:
+			strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
+				2 * MAX1721X_REG_DEV_NUMB);
+		}
+	}
+
+	if (get_sn_string(info, info->SerialNumber)) {
+		dev_err(info->w1_dev, "Can't read serial. Hardware error.\n");
+		return -ENODEV;
+	}
+
+	info->bat = devm_power_supply_register(&sl->dev, &info->bat_desc,
+						&psy_cfg);
+	if (IS_ERR(info->bat)) {
+		dev_err(info->w1_dev, "failed to register battery\n");
+		return PTR_ERR(info->bat);
+	}
+
+	return 0;
+}
+
+static const struct w1_family_ops w1_max1721x_fops = {
+	.add_slave = devm_w1_max1721x_add_device,
+};
+
+static struct w1_family w1_max1721x_family = {
+	.fid = W1_MAX1721X_FAMILY_ID,
+	.fops = &w1_max1721x_fops,
+};
+
+module_w1_family(w1_max1721x_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
+MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauge IC driver");
+MODULE_ALIAS("w1-family-" __stringify(W1_MAX1721X_FAMILY_ID));
diff --git a/drivers/power/supply/max77650-charger.c b/drivers/power/supply/max77650-charger.c
new file mode 100644
index 000000000..d913428be
--- /dev/null
+++ b/drivers/power/supply/max77650-charger.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Battery charger driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MAX77650_CHARGER_ENABLED		BIT(0)
+#define MAX77650_CHARGER_DISABLED		0x00
+#define MAX77650_CHARGER_CHG_EN_MASK		BIT(0)
+
+#define MAX77650_CHG_DETAILS_MASK		GENMASK(7, 4)
+#define MAX77650_CHG_DETAILS_BITS(_reg) \
+		(((_reg) & MAX77650_CHG_DETAILS_MASK) >> 4)
+
+/* Charger is OFF. */
+#define MAX77650_CHG_OFF			0x00
+/* Charger is in prequalification mode. */
+#define MAX77650_CHG_PREQ			0x01
+/* Charger is in fast-charge constant current mode. */
+#define MAX77650_CHG_ON_CURR			0x02
+/* Charger is in JEITA modified fast-charge constant-current mode. */
+#define MAX77650_CHG_ON_CURR_JEITA		0x03
+/* Charger is in fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT			0x04
+/* Charger is in JEITA modified fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT_JEITA		0x05
+/* Charger is in top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF			0x06
+/* Charger is in JEITA modified top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF_JEITA		0x07
+/* Charger is done. */
+#define MAX77650_CHG_DONE			0x08
+/* Charger is JEITA modified done. */
+#define MAX77650_CHG_DONE_JEITA			0x09
+/* Charger is suspended due to a prequalification timer fault. */
+#define MAX77650_CHG_SUSP_PREQ_TIM_FAULT	0x0a
+/* Charger is suspended due to a fast-charge timer fault. */
+#define MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT	0x0b
+/* Charger is suspended due to a battery temperature fault. */
+#define MAX77650_CHG_SUSP_BATT_TEMP_FAULT	0x0c
+
+#define MAX77650_CHGIN_DETAILS_MASK		GENMASK(3, 2)
+#define MAX77650_CHGIN_DETAILS_BITS(_reg) \
+		(((_reg) & MAX77650_CHGIN_DETAILS_MASK) >> 2)
+
+#define MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT	0x00
+#define MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT	0x01
+#define MAX77650_CHGIN_OKAY			0x11
+
+#define MAX77650_CHARGER_CHG_MASK	BIT(1)
+#define MAX77650_CHARGER_CHG_CHARGING(_reg) \
+		(((_reg) & MAX77650_CHARGER_CHG_MASK) > 1)
+
+#define MAX77650_CHARGER_VCHGIN_MIN_MASK	0xc0
+#define MAX77650_CHARGER_VCHGIN_MIN_SHIFT(_val)	((_val) << 5)
+
+#define MAX77650_CHARGER_ICHGIN_LIM_MASK	0x1c
+#define MAX77650_CHARGER_ICHGIN_LIM_SHIFT(_val)	((_val) << 2)
+
+struct max77650_charger_data {
+	struct regmap *map;
+	struct device *dev;
+};
+
+static enum power_supply_property max77650_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_TYPE
+};
+
+static const unsigned int max77650_charger_vchgin_min_table[] = {
+	4000000, 4100000, 4200000, 4300000, 4400000, 4500000, 4600000, 4700000
+};
+
+static const unsigned int max77650_charger_ichgin_lim_table[] = {
+	95000, 190000, 285000, 380000, 475000
+};
+
+static int max77650_charger_set_vchgin_min(struct max77650_charger_data *chg,
+					   unsigned int val)
+{
+	int i, rv;
+
+	for (i = 0; i < ARRAY_SIZE(max77650_charger_vchgin_min_table); i++) {
+		if (val == max77650_charger_vchgin_min_table[i]) {
+			rv = regmap_update_bits(chg->map,
+					MAX77650_REG_CNFG_CHG_B,
+					MAX77650_CHARGER_VCHGIN_MIN_MASK,
+					MAX77650_CHARGER_VCHGIN_MIN_SHIFT(i));
+			if (rv)
+				return rv;
+
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max77650_charger_set_ichgin_lim(struct max77650_charger_data *chg,
+					   unsigned int val)
+{
+	int i, rv;
+
+	for (i = 0; i < ARRAY_SIZE(max77650_charger_ichgin_lim_table); i++) {
+		if (val == max77650_charger_ichgin_lim_table[i]) {
+			rv = regmap_update_bits(chg->map,
+					MAX77650_REG_CNFG_CHG_B,
+					MAX77650_CHARGER_ICHGIN_LIM_MASK,
+					MAX77650_CHARGER_ICHGIN_LIM_SHIFT(i));
+			if (rv)
+				return rv;
+
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int max77650_charger_enable(struct max77650_charger_data *chg)
+{
+	int rv;
+
+	rv = regmap_update_bits(chg->map,
+				MAX77650_REG_CNFG_CHG_B,
+				MAX77650_CHARGER_CHG_EN_MASK,
+				MAX77650_CHARGER_ENABLED);
+	if (rv)
+		dev_err(chg->dev, "unable to enable the charger: %d\n", rv);
+
+	return rv;
+}
+
+static int max77650_charger_disable(struct max77650_charger_data *chg)
+{
+	int rv;
+
+	rv = regmap_update_bits(chg->map,
+				MAX77650_REG_CNFG_CHG_B,
+				MAX77650_CHARGER_CHG_EN_MASK,
+				MAX77650_CHARGER_DISABLED);
+	if (rv)
+		dev_err(chg->dev, "unable to disable the charger: %d\n", rv);
+
+	return rv;
+}
+
+static irqreturn_t max77650_charger_check_status(int irq, void *data)
+{
+	struct max77650_charger_data *chg = data;
+	int rv, reg;
+
+	rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+	if (rv) {
+		dev_err(chg->dev,
+			"unable to read the charger status: %d\n", rv);
+		return IRQ_HANDLED;
+	}
+
+	switch (MAX77650_CHGIN_DETAILS_BITS(reg)) {
+	case MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT:
+		dev_err(chg->dev, "undervoltage lockout detected, disabling charger\n");
+		max77650_charger_disable(chg);
+		break;
+	case MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT:
+		dev_err(chg->dev, "overvoltage lockout detected, disabling charger\n");
+		max77650_charger_disable(chg);
+		break;
+	case MAX77650_CHGIN_OKAY:
+		max77650_charger_enable(chg);
+		break;
+	default:
+		/* May be 0x10 - debouncing */
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int max77650_charger_get_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 union power_supply_propval *val)
+{
+	struct max77650_charger_data *chg = power_supply_get_drvdata(psy);
+	int rv, reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		if (MAX77650_CHARGER_CHG_CHARGING(reg)) {
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		}
+
+		switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+		case MAX77650_CHG_OFF:
+		case MAX77650_CHG_SUSP_PREQ_TIM_FAULT:
+		case MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT:
+		case MAX77650_CHG_SUSP_BATT_TEMP_FAULT:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		case MAX77650_CHG_PREQ:
+		case MAX77650_CHG_ON_CURR:
+		case MAX77650_CHG_ON_CURR_JEITA:
+		case MAX77650_CHG_ON_VOLT:
+		case MAX77650_CHG_ON_VOLT_JEITA:
+		case MAX77650_CHG_ON_TOPOFF:
+		case MAX77650_CHG_ON_TOPOFF_JEITA:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case MAX77650_CHG_DONE:
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		}
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		val->intval = MAX77650_CHARGER_CHG_CHARGING(reg);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+		if (rv)
+			return rv;
+
+		if (!MAX77650_CHARGER_CHG_CHARGING(reg)) {
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+
+		switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+		case MAX77650_CHG_PREQ:
+		case MAX77650_CHG_ON_CURR:
+		case MAX77650_CHG_ON_CURR_JEITA:
+		case MAX77650_CHG_ON_VOLT:
+		case MAX77650_CHG_ON_VOLT_JEITA:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case MAX77650_CHG_ON_TOPOFF:
+		case MAX77650_CHG_ON_TOPOFF_JEITA:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct power_supply_desc max77650_battery_desc = {
+	.name		= "max77650",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.get_property	= max77650_charger_get_property,
+	.properties	= max77650_charger_properties,
+	.num_properties	= ARRAY_SIZE(max77650_charger_properties),
+};
+
+static int max77650_charger_probe(struct platform_device *pdev)
+{
+	struct power_supply_config pscfg = {};
+	struct max77650_charger_data *chg;
+	struct power_supply *battery;
+	struct device *dev, *parent;
+	int rv, chg_irq, chgin_irq;
+	unsigned int prop;
+
+	dev = &pdev->dev;
+	parent = dev->parent;
+
+	chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+
+	chg->map = dev_get_regmap(parent, NULL);
+	if (!chg->map)
+		return -ENODEV;
+
+	chg->dev = dev;
+
+	pscfg.of_node = dev->of_node;
+	pscfg.drv_data = chg;
+
+	chg_irq = platform_get_irq_byname(pdev, "CHG");
+	if (chg_irq < 0)
+		return chg_irq;
+
+	chgin_irq = platform_get_irq_byname(pdev, "CHGIN");
+	if (chgin_irq < 0)
+		return chgin_irq;
+
+	rv = devm_request_any_context_irq(dev, chg_irq,
+					  max77650_charger_check_status,
+					  IRQF_ONESHOT, "chg", chg);
+	if (rv < 0)
+		return rv;
+
+	rv = devm_request_any_context_irq(dev, chgin_irq,
+					  max77650_charger_check_status,
+					  IRQF_ONESHOT, "chgin", chg);
+	if (rv < 0)
+		return rv;
+
+	battery = devm_power_supply_register(dev,
+					     &max77650_battery_desc, &pscfg);
+	if (IS_ERR(battery))
+		return PTR_ERR(battery);
+
+	rv = of_property_read_u32(dev->of_node,
+				  "input-voltage-min-microvolt", &prop);
+	if (rv == 0) {
+		rv = max77650_charger_set_vchgin_min(chg, prop);
+		if (rv)
+			return rv;
+	}
+
+	rv = of_property_read_u32(dev->of_node,
+				  "input-current-limit-microamp", &prop);
+	if (rv == 0) {
+		rv = max77650_charger_set_ichgin_lim(chg, prop);
+		if (rv)
+			return rv;
+	}
+
+	return max77650_charger_enable(chg);
+}
+
+static int max77650_charger_remove(struct platform_device *pdev)
+{
+	struct max77650_charger_data *chg = platform_get_drvdata(pdev);
+
+	return max77650_charger_disable(chg);
+}
+
+static const struct of_device_id max77650_charger_of_match[] = {
+	{ .compatible = "maxim,max77650-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max77650_charger_of_match);
+
+static struct platform_driver max77650_charger_driver = {
+	.driver = {
+		.name = "max77650-charger",
+		.of_match_table = max77650_charger_of_match,
+	},
+	.probe = max77650_charger_probe,
+	.remove = max77650_charger_remove,
+};
+module_platform_driver(max77650_charger_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 charger driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max77650-charger");
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c
new file mode 100644
index 000000000..a2c5c9858
--- /dev/null
+++ b/drivers/power/supply/max77693_charger.c
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77693_charger.c - Battery charger driver for the Maxim 77693
+//
+// Copyright (C) 2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
+#include <linux/mfd/max77693-private.h>
+
+#define MAX77693_CHARGER_NAME				"max77693-charger"
+static const char *max77693_charger_model		= "MAX77693";
+static const char *max77693_charger_manufacturer	= "Maxim Integrated";
+
+struct max77693_charger {
+	struct device		*dev;
+	struct max77693_dev	*max77693;
+	struct power_supply	*charger;
+
+	u32 constant_volt;
+	u32 min_system_volt;
+	u32 thermal_regulation_temp;
+	u32 batttery_overcurrent;
+	u32 charge_input_threshold_volt;
+};
+
+static int max77693_get_charger_state(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int data;
+
+	ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_DETAILS_01_CHG_MASK;
+	data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+	switch (data) {
+	case MAX77693_CHARGING_PREQUALIFICATION:
+	case MAX77693_CHARGING_FAST_CONST_CURRENT:
+	case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+	case MAX77693_CHARGING_TOP_OFF:
+	/* In high temp the charging current is reduced, but still charging */
+	case MAX77693_CHARGING_HIGH_TEMP:
+		*val = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case MAX77693_CHARGING_DONE:
+		*val = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case MAX77693_CHARGING_TIMER_EXPIRED:
+	case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+		*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case MAX77693_CHARGING_OFF:
+	case MAX77693_CHARGING_OVER_TEMP:
+	case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+		*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case MAX77693_CHARGING_RESERVED:
+	default:
+		*val = POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int max77693_get_charge_type(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int data;
+
+	ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_DETAILS_01_CHG_MASK;
+	data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+	switch (data) {
+	case MAX77693_CHARGING_PREQUALIFICATION:
+	/*
+	 * Top-off: trickle or fast? In top-off the current varies between
+	 * 100 and 250 mA. It is higher than prequalification current.
+	 */
+	case MAX77693_CHARGING_TOP_OFF:
+		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case MAX77693_CHARGING_FAST_CONST_CURRENT:
+	case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+	/* In high temp the charging current is reduced, but still charging */
+	case MAX77693_CHARGING_HIGH_TEMP:
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case MAX77693_CHARGING_DONE:
+	case MAX77693_CHARGING_TIMER_EXPIRED:
+	case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+	case MAX77693_CHARGING_OFF:
+	case MAX77693_CHARGING_OVER_TEMP:
+	case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case MAX77693_CHARGING_RESERVED:
+	default:
+		*val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+
+	return 0;
+}
+
+/*
+ * Supported health statuses:
+ *  - POWER_SUPPLY_HEALTH_DEAD
+ *  - POWER_SUPPLY_HEALTH_GOOD
+ *  - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ *  - POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE
+ *  - POWER_SUPPLY_HEALTH_UNKNOWN
+ *  - POWER_SUPPLY_HEALTH_UNSPEC_FAILURE
+ */
+static int max77693_get_battery_health(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int data;
+
+	ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_DETAILS_01_BAT_MASK;
+	data >>= CHG_DETAILS_01_BAT_SHIFT;
+
+	switch (data) {
+	case MAX77693_BATTERY_NOBAT:
+		*val = POWER_SUPPLY_HEALTH_DEAD;
+		break;
+	case MAX77693_BATTERY_PREQUALIFICATION:
+	case MAX77693_BATTERY_GOOD:
+	case MAX77693_BATTERY_LOWVOLTAGE:
+		*val = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case MAX77693_BATTERY_TIMER_EXPIRED:
+		/*
+		 * Took longer to charge than expected, charging suspended.
+		 * Damaged battery?
+		 */
+		*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		break;
+	case MAX77693_BATTERY_OVERVOLTAGE:
+		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+	case MAX77693_BATTERY_OVERCURRENT:
+		*val = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	case MAX77693_BATTERY_RESERVED:
+	default:
+		*val = POWER_SUPPLY_HEALTH_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static int max77693_get_present(struct regmap *regmap, int *val)
+{
+	unsigned int data;
+	int ret;
+
+	/*
+	 * Read CHG_INT_OK register. High DETBAT bit here should be
+	 * equal to value 0x0 in CHG_DETAILS_01/BAT field.
+	 */
+	ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+	if (ret < 0)
+		return ret;
+
+	*val = (data & CHG_INT_OK_DETBAT_MASK) ? 0 : 1;
+
+	return 0;
+}
+
+static int max77693_get_online(struct regmap *regmap, int *val)
+{
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+	if (ret < 0)
+		return ret;
+
+	*val = (data & CHG_INT_OK_CHGIN_MASK) ? 1 : 0;
+
+	return 0;
+}
+
+static enum power_supply_property max77693_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max77693_charger_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max77693_charger *chg = power_supply_get_drvdata(psy);
+	struct regmap *regmap = chg->max77693->regmap;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max77693_get_charger_state(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = max77693_get_charge_type(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = max77693_get_battery_health(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = max77693_get_present(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = max77693_get_online(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = max77693_charger_model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = max77693_charger_manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct power_supply_desc max77693_charger_desc = {
+	.name		= MAX77693_CHARGER_NAME,
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= max77693_charger_props,
+	.num_properties	= ARRAY_SIZE(max77693_charger_props),
+	.get_property	= max77693_charger_get_property,
+};
+
+static ssize_t device_attr_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count,
+		int (*fn)(struct max77693_charger *, unsigned long))
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = fn(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t fast_charge_timer_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_01,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_01_FCHGTIME_MASK;
+	data >>= CHG_CNFG_01_FCHGTIME_SHIFT;
+	switch (data) {
+	case 0x1 ... 0x7:
+		/* Starting from 4 hours, step by 2 hours */
+		val = 4 + (data - 1) * 2;
+		break;
+	case 0x0:
+	default:
+		val = 0;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_fast_charge_timer(struct max77693_charger *chg,
+		unsigned long hours)
+{
+	unsigned int data;
+
+	/*
+	 * 0x00 - disable
+	 * 0x01 - 4h
+	 * 0x02 - 6h
+	 * ...
+	 * 0x07 - 16h
+	 * Round down odd values.
+	 */
+	switch (hours) {
+	case 4 ... 16:
+		data = (hours - 4) / 2 + 1;
+		break;
+	case 0:
+		/* Disable */
+		data = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	data <<= CHG_CNFG_01_FCHGTIME_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_01,
+			CHG_CNFG_01_FCHGTIME_MASK, data);
+}
+
+static ssize_t fast_charge_timer_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_fast_charge_timer);
+}
+
+static ssize_t top_off_threshold_current_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_03_TOITH_MASK;
+	data >>= CHG_CNFG_03_TOITH_SHIFT;
+
+	if (data <= 0x04)
+		val = 100000 + data * 25000;
+	else
+		val = data * 50000;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_threshold_current(struct max77693_charger *chg,
+		unsigned long uamp)
+{
+	unsigned int data;
+
+	if (uamp < 100000 || uamp > 350000)
+		return -EINVAL;
+
+	if (uamp <= 200000)
+		data = (uamp - 100000) / 25000;
+	else
+		/* (200000, 350000> */
+		data = uamp / 50000;
+
+	data <<= CHG_CNFG_03_TOITH_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_03,
+			CHG_CNFG_03_TOITH_MASK, data);
+}
+
+static ssize_t top_off_threshold_current_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_top_off_threshold_current);
+}
+
+static ssize_t top_off_timer_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max77693_charger *chg = dev_get_drvdata(dev);
+	unsigned int data, val;
+	int ret;
+
+	ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+			&data);
+	if (ret < 0)
+		return ret;
+
+	data &= CHG_CNFG_03_TOTIME_MASK;
+	data >>= CHG_CNFG_03_TOTIME_SHIFT;
+
+	val = data * 10;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_timer(struct max77693_charger *chg,
+		unsigned long minutes)
+{
+	unsigned int data;
+
+	if (minutes > 70)
+		return -EINVAL;
+
+	data = minutes / 10;
+	data <<= CHG_CNFG_03_TOTIME_SHIFT;
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_03,
+			CHG_CNFG_03_TOTIME_MASK, data);
+}
+
+static ssize_t top_off_timer_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return device_attr_store(dev, attr, buf, count,
+			max77693_set_top_off_timer);
+}
+
+static DEVICE_ATTR_RW(fast_charge_timer);
+static DEVICE_ATTR_RW(top_off_threshold_current);
+static DEVICE_ATTR_RW(top_off_timer);
+
+static int max77693_set_constant_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	/*
+	 * 0x00 - 3.650 V
+	 * 0x01 - 3.675 V
+	 * ...
+	 * 0x1b - 4.325 V
+	 * 0x1c - 4.340 V
+	 * 0x1d - 4.350 V
+	 * 0x1e - 4.375 V
+	 * 0x1f - 4.400 V
+	 */
+	if (uvolt >= 3650000 && uvolt < 4340000)
+		data = (uvolt - 3650000) / 25000;
+	else if (uvolt >= 4340000 && uvolt < 4350000)
+		data = 0x1c;
+	else if (uvolt >= 4350000 && uvolt <= 4400000)
+		data = 0x1d + (uvolt - 4350000) / 25000;
+	else {
+		dev_err(chg->dev, "Wrong value for charging constant voltage\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_04_CHGCVPRM_SHIFT;
+
+	dev_dbg(chg->dev, "Charging constant voltage: %u (0x%x)\n", uvolt,
+			data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_04,
+			CHG_CNFG_04_CHGCVPRM_MASK, data);
+}
+
+static int max77693_set_min_system_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	if (uvolt < 3000000 || uvolt > 3700000) {
+		dev_err(chg->dev, "Wrong value for minimum system regulation voltage\n");
+		return -EINVAL;
+	}
+
+	data = (uvolt - 3000000) / 100000;
+
+	data <<= CHG_CNFG_04_MINVSYS_SHIFT;
+
+	dev_dbg(chg->dev, "Minimum system regulation voltage: %u (0x%x)\n",
+			uvolt, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_04,
+			CHG_CNFG_04_MINVSYS_MASK, data);
+}
+
+static int max77693_set_thermal_regulation_temp(struct max77693_charger *chg,
+		unsigned int cels)
+{
+	unsigned int data;
+
+	switch (cels) {
+	case 70:
+	case 85:
+	case 100:
+	case 115:
+		data = (cels - 70) / 15;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for thermal regulation loop temperature\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_07_REGTEMP_SHIFT;
+
+	dev_dbg(chg->dev, "Thermal regulation loop temperature: %u (0x%x)\n",
+			cels, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_07,
+			CHG_CNFG_07_REGTEMP_MASK, data);
+}
+
+static int max77693_set_batttery_overcurrent(struct max77693_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int data;
+
+	if (uamp && (uamp < 2000000 || uamp > 3500000)) {
+		dev_err(chg->dev, "Wrong value for battery overcurrent\n");
+		return -EINVAL;
+	}
+
+	if (uamp)
+		data = ((uamp - 2000000) / 250000) + 1;
+	else
+		data = 0; /* disable */
+
+	data <<= CHG_CNFG_12_B2SOVRC_SHIFT;
+
+	dev_dbg(chg->dev, "Battery overcurrent: %u (0x%x)\n", uamp, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_12,
+			CHG_CNFG_12_B2SOVRC_MASK, data);
+}
+
+static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg,
+		unsigned int uvolt)
+{
+	unsigned int data;
+
+	switch (uvolt) {
+	case 4300000:
+		data = 0x0;
+		break;
+	case 4700000:
+	case 4800000:
+	case 4900000:
+		data = (uvolt - 4700000) / 100000;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
+		return -EINVAL;
+	}
+
+	data <<= CHG_CNFG_12_VCHGINREG_SHIFT;
+
+	dev_dbg(chg->dev, "Charge input voltage regulation threshold: %u (0x%x)\n",
+			uvolt, data);
+
+	return regmap_update_bits(chg->max77693->regmap,
+			MAX77693_CHG_REG_CHG_CNFG_12,
+			CHG_CNFG_12_VCHGINREG_MASK, data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ */
+static int max77693_reg_init(struct max77693_charger *chg)
+{
+	int ret;
+	unsigned int data;
+
+	/* Unlock charger register protection */
+	data = (0x3 << CHG_CNFG_06_CHGPROT_SHIFT);
+	ret = regmap_update_bits(chg->max77693->regmap,
+				MAX77693_CHG_REG_CHG_CNFG_06,
+				CHG_CNFG_06_CHGPROT_MASK, data);
+	if (ret) {
+		dev_err(chg->dev, "Error unlocking registers: %d\n", ret);
+		return ret;
+	}
+
+	ret = max77693_set_fast_charge_timer(chg, DEFAULT_FAST_CHARGE_TIMER);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_top_off_threshold_current(chg,
+			DEFAULT_TOP_OFF_THRESHOLD_CURRENT);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_top_off_timer(chg, DEFAULT_TOP_OFF_TIMER);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_constant_volt(chg, chg->constant_volt);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_min_system_volt(chg, chg->min_system_volt);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_thermal_regulation_temp(chg,
+			chg->thermal_regulation_temp);
+	if (ret)
+		return ret;
+
+	ret = max77693_set_batttery_overcurrent(chg, chg->batttery_overcurrent);
+	if (ret)
+		return ret;
+
+	return max77693_set_charge_input_threshold_volt(chg,
+			chg->charge_input_threshold_volt);
+}
+
+#ifdef CONFIG_OF
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+	struct device_node *np = dev->of_node;
+
+	if (!np) {
+		dev_err(dev, "no charger OF node\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "maxim,constant-microvolt",
+			&chg->constant_volt))
+		chg->constant_volt = DEFAULT_CONSTANT_VOLT;
+
+	if (of_property_read_u32(np, "maxim,min-system-microvolt",
+			&chg->min_system_volt))
+		chg->min_system_volt = DEFAULT_MIN_SYSTEM_VOLT;
+
+	if (of_property_read_u32(np, "maxim,thermal-regulation-celsius",
+			&chg->thermal_regulation_temp))
+		chg->thermal_regulation_temp = DEFAULT_THERMAL_REGULATION_TEMP;
+
+	if (of_property_read_u32(np, "maxim,battery-overcurrent-microamp",
+			&chg->batttery_overcurrent))
+		chg->batttery_overcurrent = DEFAULT_BATTERY_OVERCURRENT;
+
+	if (of_property_read_u32(np, "maxim,charge-input-threshold-microvolt",
+			&chg->charge_input_threshold_volt))
+		chg->charge_input_threshold_volt =
+			DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT;
+
+	return 0;
+}
+#else /* CONFIG_OF */
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static int max77693_charger_probe(struct platform_device *pdev)
+{
+	struct max77693_charger *chg;
+	struct power_supply_config psy_cfg = {};
+	struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+	chg->dev = &pdev->dev;
+	chg->max77693 = max77693;
+
+	ret = max77693_dt_init(&pdev->dev, chg);
+	if (ret)
+		return ret;
+
+	ret = max77693_reg_init(chg);
+	if (ret)
+		return ret;
+
+	psy_cfg.drv_data = chg;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n");
+		goto err;
+	}
+
+	ret = device_create_file(&pdev->dev,
+			&dev_attr_top_off_threshold_current);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create top off current sysfs entry\n");
+		goto err;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_top_off_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create top off timer sysfs entry\n");
+		goto err;
+	}
+
+	chg->charger = power_supply_register(&pdev->dev,
+						&max77693_charger_desc,
+						&psy_cfg);
+	if (IS_ERR(chg->charger)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		ret = PTR_ERR(chg->charger);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+	device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
+}
+
+static int max77693_charger_remove(struct platform_device *pdev)
+{
+	struct max77693_charger *chg = platform_get_drvdata(pdev);
+
+	device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+	device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	power_supply_unregister(chg->charger);
+
+	return 0;
+}
+
+static const struct platform_device_id max77693_charger_id[] = {
+	{ "max77693-charger", 0, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max77693_charger_id);
+
+static struct platform_driver max77693_charger_driver = {
+	.driver = {
+		.name	= "max77693-charger",
+	},
+	.probe		= max77693_charger_probe,
+	.remove		= max77693_charger_remove,
+	.id_table	= max77693_charger_id,
+};
+module_platform_driver(max77693_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 77693 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max77976_charger.c b/drivers/power/supply/max77976_charger.c
new file mode 100644
index 000000000..4fed74511
--- /dev/null
+++ b/drivers/power/supply/max77976_charger.c
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * max77976_charger.c - Driver for the Maxim MAX77976 battery charger
+ *
+ * Copyright (C) 2021 Luca Ceresoli
+ * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MAX77976_DRIVER_NAME	"max77976-charger"
+#define MAX77976_CHIP_ID	0x76
+
+static const char *max77976_manufacturer	= "Maxim Integrated";
+static const char *max77976_model		= "MAX77976";
+
+/* --------------------------------------------------------------------------
+ * Register map
+ */
+
+#define MAX77976_REG_CHIP_ID		0x00
+#define MAX77976_REG_CHIP_REVISION	0x01
+#define MAX77976_REG_CHG_INT_OK		0x12
+#define MAX77976_REG_CHG_DETAILS_01	0x14
+#define MAX77976_REG_CHG_CNFG_00	0x16
+#define MAX77976_REG_CHG_CNFG_02	0x18
+#define MAX77976_REG_CHG_CNFG_06	0x1c
+#define MAX77976_REG_CHG_CNFG_09	0x1f
+
+/* CHG_DETAILS_01.CHG_DTLS values */
+enum max77976_charging_state {
+	MAX77976_CHARGING_PREQUALIFICATION = 0x0,
+	MAX77976_CHARGING_FAST_CONST_CURRENT,
+	MAX77976_CHARGING_FAST_CONST_VOLTAGE,
+	MAX77976_CHARGING_TOP_OFF,
+	MAX77976_CHARGING_DONE,
+	MAX77976_CHARGING_RESERVED_05,
+	MAX77976_CHARGING_TIMER_FAULT,
+	MAX77976_CHARGING_SUSPENDED_QBATT_OFF,
+	MAX77976_CHARGING_OFF,
+	MAX77976_CHARGING_RESERVED_09,
+	MAX77976_CHARGING_THERMAL_SHUTDOWN,
+	MAX77976_CHARGING_WATCHDOG_EXPIRED,
+	MAX77976_CHARGING_SUSPENDED_JEITA,
+	MAX77976_CHARGING_SUSPENDED_THM_REMOVAL,
+	MAX77976_CHARGING_SUSPENDED_PIN,
+	MAX77976_CHARGING_RESERVED_0F,
+};
+
+/* CHG_DETAILS_01.BAT_DTLS values */
+enum max77976_battery_state {
+	MAX77976_BATTERY_BATTERY_REMOVAL = 0x0,
+	MAX77976_BATTERY_PREQUALIFICATION,
+	MAX77976_BATTERY_TIMER_FAULT,
+	MAX77976_BATTERY_REGULAR_VOLTAGE,
+	MAX77976_BATTERY_LOW_VOLTAGE,
+	MAX77976_BATTERY_OVERVOLTAGE,
+	MAX77976_BATTERY_RESERVED,
+	MAX77976_BATTERY_BATTERY_ONLY, // No valid adapter is present
+};
+
+/* CHG_CNFG_00.MODE values */
+enum max77976_mode {
+	MAX77976_MODE_CHARGER_BUCK		= 0x5,
+	MAX77976_MODE_BOOST			= 0x9,
+};
+
+/* CHG_CNFG_02.CHG_CC: charge current limit, 100..5500 mA, 50 mA steps */
+#define MAX77976_CHG_CC_STEP			  50000U
+#define MAX77976_CHG_CC_MIN			 100000U
+#define MAX77976_CHG_CC_MAX			5500000U
+
+/* CHG_CNFG_09.CHGIN_ILIM: input current limit, 100..3200 mA, 100 mA steps */
+#define MAX77976_CHGIN_ILIM_STEP		 100000U
+#define MAX77976_CHGIN_ILIM_MIN			 100000U
+#define MAX77976_CHGIN_ILIM_MAX			3200000U
+
+enum max77976_field_idx {
+	VERSION, REVISION,                      /* CHIP_REVISION */
+	CHGIN_OK,                               /* CHG_INT_OK */
+	BAT_DTLS, CHG_DTLS,                     /* CHG_DETAILS_01 */
+	MODE,                                   /* CHG_CNFG_00 */
+	CHG_CC,                                 /* CHG_CNFG_02 */
+	CHGPROT,                                /* CHG_CNFG_06 */
+	CHGIN_ILIM,                             /* CHG_CNFG_09 */
+	MAX77976_N_REGMAP_FIELDS
+};
+
+static const struct reg_field max77976_reg_field[MAX77976_N_REGMAP_FIELDS] = {
+	[VERSION]        = REG_FIELD(MAX77976_REG_CHIP_REVISION,   4, 7),
+	[REVISION]       = REG_FIELD(MAX77976_REG_CHIP_REVISION,   0, 3),
+	[CHGIN_OK]       = REG_FIELD(MAX77976_REG_CHG_INT_OK,      6, 6),
+	[CHG_DTLS]       = REG_FIELD(MAX77976_REG_CHG_DETAILS_01,  0, 3),
+	[BAT_DTLS]       = REG_FIELD(MAX77976_REG_CHG_DETAILS_01,  4, 6),
+	[MODE]           = REG_FIELD(MAX77976_REG_CHG_CNFG_00,     0, 3),
+	[CHG_CC]         = REG_FIELD(MAX77976_REG_CHG_CNFG_02,     0, 6),
+	[CHGPROT]        = REG_FIELD(MAX77976_REG_CHG_CNFG_06,     2, 3),
+	[CHGIN_ILIM]     = REG_FIELD(MAX77976_REG_CHG_CNFG_09,     0, 5),
+};
+
+static const struct regmap_config max77976_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x24,
+};
+
+/* --------------------------------------------------------------------------
+ * Data structures
+ */
+
+struct max77976 {
+	struct i2c_client	*client;
+	struct regmap		*regmap;
+	struct regmap_field	*rfield[MAX77976_N_REGMAP_FIELDS];
+};
+
+/* --------------------------------------------------------------------------
+ * power_supply properties
+ */
+
+static int max77976_get_status(struct max77976 *chg, int *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_field_read(chg->rfield[CHG_DTLS], &regval);
+	if (err < 0)
+		return err;
+
+	switch (regval) {
+	case MAX77976_CHARGING_PREQUALIFICATION:
+	case MAX77976_CHARGING_FAST_CONST_CURRENT:
+	case MAX77976_CHARGING_FAST_CONST_VOLTAGE:
+	case MAX77976_CHARGING_TOP_OFF:
+		*val = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case MAX77976_CHARGING_DONE:
+		*val = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case MAX77976_CHARGING_TIMER_FAULT:
+	case MAX77976_CHARGING_SUSPENDED_QBATT_OFF:
+	case MAX77976_CHARGING_SUSPENDED_JEITA:
+	case MAX77976_CHARGING_SUSPENDED_THM_REMOVAL:
+	case MAX77976_CHARGING_SUSPENDED_PIN:
+		*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case MAX77976_CHARGING_OFF:
+	case MAX77976_CHARGING_THERMAL_SHUTDOWN:
+	case MAX77976_CHARGING_WATCHDOG_EXPIRED:
+		*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	default:
+		*val = POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int max77976_get_charge_type(struct max77976 *chg, int *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_field_read(chg->rfield[CHG_DTLS], &regval);
+	if (err < 0)
+		return err;
+
+	switch (regval) {
+	case MAX77976_CHARGING_PREQUALIFICATION:
+		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case MAX77976_CHARGING_FAST_CONST_CURRENT:
+	case MAX77976_CHARGING_FAST_CONST_VOLTAGE:
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case MAX77976_CHARGING_TOP_OFF:
+		*val = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+		break;
+	case MAX77976_CHARGING_DONE:
+	case MAX77976_CHARGING_TIMER_FAULT:
+	case MAX77976_CHARGING_SUSPENDED_QBATT_OFF:
+	case MAX77976_CHARGING_OFF:
+	case MAX77976_CHARGING_THERMAL_SHUTDOWN:
+	case MAX77976_CHARGING_WATCHDOG_EXPIRED:
+	case MAX77976_CHARGING_SUSPENDED_JEITA:
+	case MAX77976_CHARGING_SUSPENDED_THM_REMOVAL:
+	case MAX77976_CHARGING_SUSPENDED_PIN:
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	default:
+		*val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int max77976_get_health(struct max77976 *chg, int *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_field_read(chg->rfield[BAT_DTLS], &regval);
+	if (err < 0)
+		return err;
+
+	switch (regval) {
+	case MAX77976_BATTERY_BATTERY_REMOVAL:
+		*val = POWER_SUPPLY_HEALTH_NO_BATTERY;
+		break;
+	case MAX77976_BATTERY_LOW_VOLTAGE:
+	case MAX77976_BATTERY_REGULAR_VOLTAGE:
+		*val = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case MAX77976_BATTERY_TIMER_FAULT:
+		*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		break;
+	case MAX77976_BATTERY_OVERVOLTAGE:
+		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+	case MAX77976_BATTERY_PREQUALIFICATION:
+	case MAX77976_BATTERY_BATTERY_ONLY:
+		*val = POWER_SUPPLY_HEALTH_UNKNOWN;
+		break;
+	default:
+		*val = POWER_SUPPLY_HEALTH_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int max77976_get_online(struct max77976 *chg, int *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_field_read(chg->rfield[CHGIN_OK], &regval);
+	if (err < 0)
+		return err;
+
+	*val = (regval ? 1 : 0);
+
+	return 0;
+}
+
+static int max77976_get_integer(struct max77976 *chg, enum max77976_field_idx fidx,
+				unsigned int clamp_min, unsigned int clamp_max,
+				unsigned int mult, int *val)
+{
+	unsigned int regval;
+	int err;
+
+	err = regmap_field_read(chg->rfield[fidx], &regval);
+	if (err < 0)
+		return err;
+
+	*val = clamp_val(regval * mult, clamp_min, clamp_max);
+
+	return 0;
+}
+
+static int max77976_set_integer(struct max77976 *chg, enum max77976_field_idx fidx,
+				unsigned int clamp_min, unsigned int clamp_max,
+				unsigned int div, int val)
+{
+	unsigned int regval;
+
+	regval = clamp_val(val, clamp_min, clamp_max) / div;
+
+	return regmap_field_write(chg->rfield[fidx], regval);
+}
+
+static int max77976_get_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct max77976 *chg = power_supply_get_drvdata(psy);
+	int err = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		err = max77976_get_status(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		err = max77976_get_charge_type(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		err = max77976_get_health(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		err = max77976_get_online(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+		val->intval = MAX77976_CHG_CC_MAX;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		err = max77976_get_integer(chg, CHG_CC,
+					   MAX77976_CHG_CC_MIN,
+					   MAX77976_CHG_CC_MAX,
+					   MAX77976_CHG_CC_STEP,
+					   &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		err = max77976_get_integer(chg, CHGIN_ILIM,
+					   MAX77976_CHGIN_ILIM_MIN,
+					   MAX77976_CHGIN_ILIM_MAX,
+					   MAX77976_CHGIN_ILIM_STEP,
+					   &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = max77976_model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = max77976_manufacturer;
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+}
+
+static int max77976_set_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 const union power_supply_propval *val)
+{
+	struct max77976 *chg = power_supply_get_drvdata(psy);
+	int err = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		err = max77976_set_integer(chg, CHG_CC,
+					   MAX77976_CHG_CC_MIN,
+					   MAX77976_CHG_CC_MAX,
+					   MAX77976_CHG_CC_STEP,
+					   val->intval);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		err = max77976_set_integer(chg, CHGIN_ILIM,
+					   MAX77976_CHGIN_ILIM_MIN,
+					   MAX77976_CHGIN_ILIM_MAX,
+					   MAX77976_CHGIN_ILIM_STEP,
+					   val->intval);
+		break;
+	default:
+		err = -EINVAL;
+	}
+
+	return err;
+};
+
+static int max77976_property_is_writeable(struct power_supply *psy,
+					  enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static enum power_supply_property max77976_psy_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static const struct power_supply_desc max77976_psy_desc = {
+	.name			= MAX77976_DRIVER_NAME,
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= max77976_psy_props,
+	.num_properties		= ARRAY_SIZE(max77976_psy_props),
+	.get_property		= max77976_get_property,
+	.set_property		= max77976_set_property,
+	.property_is_writeable	= max77976_property_is_writeable,
+};
+
+/* --------------------------------------------------------------------------
+ * Entry point
+ */
+
+static int max77976_detect(struct max77976 *chg)
+{
+	struct device *dev = &chg->client->dev;
+	unsigned int id, ver, rev;
+	int err;
+
+	err = regmap_read(chg->regmap, MAX77976_REG_CHIP_ID, &id);
+	if (err)
+		return dev_err_probe(dev, err, "cannot read chip ID\n");
+
+	if (id != MAX77976_CHIP_ID)
+		return dev_err_probe(dev, -ENXIO, "unknown model ID 0x%02x\n", id);
+
+	err = regmap_field_read(chg->rfield[VERSION], &ver);
+	if (!err)
+		err = regmap_field_read(chg->rfield[REVISION], &rev);
+	if (err)
+		return dev_err_probe(dev, -ENXIO, "cannot read version/revision\n");
+
+	dev_info(dev, "detected model MAX779%02x ver %u rev %u", id, ver, rev);
+
+	return 0;
+}
+
+static int max77976_configure(struct max77976 *chg)
+{
+	struct device *dev = &chg->client->dev;
+	int err;
+
+	/* Magic value to unlock writing to some registers */
+	err = regmap_field_write(chg->rfield[CHGPROT], 0x3);
+	if (err)
+		goto err;
+
+	/*
+	 * Mode 5 = Charger ON, OTG OFF, buck ON, boost OFF.
+	 * Other modes are not implemented by this driver.
+	 */
+	err = regmap_field_write(chg->rfield[MODE], MAX77976_MODE_CHARGER_BUCK);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	return dev_err_probe(dev, err, "error while configuring");
+}
+
+static int max77976_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct power_supply_config psy_cfg = {};
+	struct power_supply *psy;
+	struct max77976 *chg;
+	int err;
+	int i;
+
+	chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chg);
+	psy_cfg.drv_data = chg;
+	chg->client = client;
+
+	chg->regmap = devm_regmap_init_i2c(client, &max77976_regmap_config);
+	if (IS_ERR(chg->regmap))
+		return dev_err_probe(dev, PTR_ERR(chg->regmap),
+				     "cannot allocate regmap\n");
+
+	for (i = 0; i < MAX77976_N_REGMAP_FIELDS; i++) {
+		chg->rfield[i] = devm_regmap_field_alloc(dev, chg->regmap,
+							 max77976_reg_field[i]);
+		if (IS_ERR(chg->rfield[i]))
+			return dev_err_probe(dev, PTR_ERR(chg->rfield[i]),
+					     "cannot allocate regmap field\n");
+	}
+
+	err = max77976_detect(chg);
+	if (err)
+		return err;
+
+	err = max77976_configure(chg);
+	if (err)
+		return err;
+
+	psy = devm_power_supply_register_no_ws(dev, &max77976_psy_desc, &psy_cfg);
+	if (IS_ERR(psy))
+		return dev_err_probe(dev, PTR_ERR(psy), "cannot register\n");
+
+	return 0;
+}
+
+static const struct i2c_device_id max77976_i2c_id[] = {
+	{ MAX77976_DRIVER_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, max77976_i2c_id);
+
+static const struct of_device_id max77976_of_id[] = {
+	{ .compatible = "maxim,max77976" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, max77976_of_id);
+
+static struct i2c_driver max77976_driver = {
+	.driver = {
+		.name		= MAX77976_DRIVER_NAME,
+		.of_match_table	= max77976_of_id,
+	},
+	.probe_new	= max77976_probe,
+	.id_table	= max77976_i2c_id,
+};
+module_i2c_driver(max77976_driver);
+
+MODULE_AUTHOR("Luca Ceresoli <luca.ceresoli@bootlin.com>");
+MODULE_DESCRIPTION("Maxim MAX77976 charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/max8903_charger.c b/drivers/power/supply/max8903_charger.c
new file mode 100644
index 000000000..54d50b55f
--- /dev/null
+++ b/drivers/power/supply/max8903_charger.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+
+struct max8903_data {
+	struct device *dev;
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	/*
+	 * GPIOs
+	 * chg, flt, dcm and usus are optional.
+	 * dok or uok must be present.
+	 * If dok is present, cen must be present.
+	 */
+	struct gpio_desc *cen; /* Charger Enable input */
+	struct gpio_desc *dok; /* DC (Adapter) Power OK output */
+	struct gpio_desc *uok; /* USB Power OK output */
+	struct gpio_desc *chg; /* Charger status output */
+	struct gpio_desc *flt; /* Fault output */
+	struct gpio_desc *dcm; /* Current-Limit Mode input (1: DC, 2: USB) */
+	struct gpio_desc *usus; /* USB Suspend Input (1: suspended) */
+	bool fault;
+	bool usb_in;
+	bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+	POWER_SUPPLY_PROP_ONLINE, /* External power source */
+	POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct max8903_data *data = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		if (data->chg) {
+			if (gpiod_get_value(data->chg))
+				/* CHG asserted */
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else if (data->usb_in || data->ta_in)
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = 0;
+		if (data->usb_in || data->ta_in)
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		if (data->fault)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	bool ta_in;
+	enum power_supply_type old_type;
+
+	/*
+	 * This means the line is asserted.
+	 *
+	 * The signal is active low, but the inversion is handled in the GPIO
+	 * library as the line should be flagged GPIO_ACTIVE_LOW in the device
+	 * tree.
+	 */
+	ta_in = gpiod_get_value(data->dok);
+
+	if (ta_in == data->ta_in)
+		return IRQ_HANDLED;
+
+	data->ta_in = ta_in;
+
+	/* Set Current-Limit-Mode 1:DC 0:USB */
+	if (data->dcm)
+		gpiod_set_value(data->dcm, ta_in);
+
+	/* Charger Enable / Disable */
+	if (data->cen) {
+		int val;
+
+		if (ta_in)
+			/* Certainly enable if DOK is asserted */
+			val = 1;
+		else if (data->usb_in)
+			/* Enable if the USB charger is enabled */
+			val = 1;
+		else
+			/* Else default-disable */
+			val = 0;
+
+		gpiod_set_value(data->cen, val);
+	}
+
+	dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+			"Connected" : "Disconnected");
+
+	old_type = data->psy_desc.type;
+
+	if (data->ta_in)
+		data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	else if (data->usb_in)
+		data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	else
+		data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+	if (old_type != data->psy_desc.type)
+		power_supply_changed(data->psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	bool usb_in;
+	enum power_supply_type old_type;
+
+	/*
+	 * This means the line is asserted.
+	 *
+	 * The signal is active low, but the inversion is handled in the GPIO
+	 * library as the line should be flagged GPIO_ACTIVE_LOW in the device
+	 * tree.
+	 */
+	usb_in = gpiod_get_value(data->uok);
+
+	if (usb_in == data->usb_in)
+		return IRQ_HANDLED;
+
+	data->usb_in = usb_in;
+
+	/* Do not touch Current-Limit-Mode */
+
+	/* Charger Enable / Disable */
+	if (data->cen) {
+		int val;
+
+		if (usb_in)
+			/* Certainly enable if UOK is asserted */
+			val = 1;
+		else if (data->ta_in)
+			/* Enable if the DC charger is enabled */
+			val = 1;
+		else
+			/* Else default-disable */
+			val = 0;
+
+		gpiod_set_value(data->cen, val);
+	}
+
+	dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+			"Connected" : "Disconnected");
+
+	old_type = data->psy_desc.type;
+
+	if (data->ta_in)
+		data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	else if (data->usb_in)
+		data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+	else
+		data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+	if (old_type != data->psy_desc.type)
+		power_supply_changed(data->psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+	struct max8903_data *data = _data;
+	bool fault;
+
+	/*
+	 * This means the line is asserted.
+	 *
+	 * The signal is active low, but the inversion is handled in the GPIO
+	 * library as the line should be flagged GPIO_ACTIVE_LOW in the device
+	 * tree.
+	 */
+	fault = gpiod_get_value(data->flt);
+
+	if (fault == data->fault)
+		return IRQ_HANDLED;
+
+	data->fault = fault;
+
+	if (fault)
+		dev_err(data->dev, "Charger suffers a fault and stops.\n");
+	else
+		dev_err(data->dev, "Charger recovered from a fault.\n");
+
+	return IRQ_HANDLED;
+}
+
+static int max8903_setup_gpios(struct platform_device *pdev)
+{
+	struct max8903_data *data = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	bool ta_in = false;
+	bool usb_in = false;
+	enum gpiod_flags flags;
+
+	data->dok = devm_gpiod_get_optional(dev, "dok", GPIOD_IN);
+	if (IS_ERR(data->dok))
+		return dev_err_probe(dev, PTR_ERR(data->dok),
+				     "failed to get DOK GPIO");
+	if (data->dok) {
+		gpiod_set_consumer_name(data->dok, data->psy_desc.name);
+		/*
+		 * The DC OK is pulled up to 1 and goes low when a charger
+		 * is plugged in (active low) but in the device tree the
+		 * line is marked as GPIO_ACTIVE_LOW so we get a 1 (asserted)
+		 * here if the DC charger is plugged in.
+		 */
+		ta_in = gpiod_get_value(data->dok);
+	}
+
+	data->uok = devm_gpiod_get_optional(dev, "uok", GPIOD_IN);
+	if (IS_ERR(data->uok))
+		return dev_err_probe(dev, PTR_ERR(data->uok),
+				     "failed to get UOK GPIO");
+	if (data->uok) {
+		gpiod_set_consumer_name(data->uok, data->psy_desc.name);
+		/*
+		 * The USB OK is pulled up to 1 and goes low when a USB charger
+		 * is plugged in (active low) but in the device tree the
+		 * line is marked as GPIO_ACTIVE_LOW so we get a 1 (asserted)
+		 * here if the USB charger is plugged in.
+		 */
+		usb_in = gpiod_get_value(data->uok);
+	}
+
+	/* Either DC OK or USB OK must be provided */
+	if (!data->dok && !data->uok) {
+		dev_err(dev, "no valid power source\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If either charger is already connected at this point,
+	 * assert the CEN line and enable charging from the start.
+	 *
+	 * The line is active low but also marked with GPIO_ACTIVE_LOW
+	 * in the device tree, so when we assert the line with
+	 * GPIOD_OUT_HIGH the line will be driven low.
+	 */
+	flags = (ta_in || usb_in) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	/*
+	 * If DC OK is provided, Charger Enable CEN is compulsory
+	 * so this is not optional here.
+	 */
+	data->cen = devm_gpiod_get(dev, "cen", flags);
+	if (IS_ERR(data->cen))
+		return dev_err_probe(dev, PTR_ERR(data->cen),
+				     "failed to get CEN GPIO");
+	gpiod_set_consumer_name(data->cen, data->psy_desc.name);
+
+	/*
+	 * If the DC charger is connected, then select it.
+	 *
+	 * The DCM line should be marked GPIO_ACTIVE_HIGH in the
+	 * device tree. Driving it high will enable the DC charger
+	 * input over the USB charger input.
+	 */
+	flags = ta_in ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	data->dcm = devm_gpiod_get_optional(dev, "dcm", flags);
+	if (IS_ERR(data->dcm))
+		return dev_err_probe(dev, PTR_ERR(data->dcm),
+				     "failed to get DCM GPIO");
+	gpiod_set_consumer_name(data->dcm, data->psy_desc.name);
+
+	data->chg = devm_gpiod_get_optional(dev, "chg", GPIOD_IN);
+	if (IS_ERR(data->chg))
+		return dev_err_probe(dev, PTR_ERR(data->chg),
+				     "failed to get CHG GPIO");
+	gpiod_set_consumer_name(data->chg, data->psy_desc.name);
+
+	data->flt = devm_gpiod_get_optional(dev, "flt", GPIOD_IN);
+	if (IS_ERR(data->flt))
+		return dev_err_probe(dev, PTR_ERR(data->flt),
+				     "failed to get FLT GPIO");
+	gpiod_set_consumer_name(data->flt, data->psy_desc.name);
+
+	data->usus = devm_gpiod_get_optional(dev, "usus", GPIOD_IN);
+	if (IS_ERR(data->usus))
+		return dev_err_probe(dev, PTR_ERR(data->usus),
+				     "failed to get USUS GPIO");
+	gpiod_set_consumer_name(data->usus, data->psy_desc.name);
+
+	data->fault = false;
+	data->ta_in = ta_in;
+	data->usb_in = usb_in;
+
+	return 0;
+}
+
+static int max8903_probe(struct platform_device *pdev)
+{
+	struct max8903_data *data;
+	struct device *dev = &pdev->dev;
+	struct power_supply_config psy_cfg = {};
+	int ret = 0;
+
+	data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	platform_set_drvdata(pdev, data);
+
+	ret = max8903_setup_gpios(pdev);
+	if (ret)
+		return ret;
+
+	data->psy_desc.name = "max8903_charger";
+	data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+			((data->usb_in) ? POWER_SUPPLY_TYPE_USB :
+			 POWER_SUPPLY_TYPE_BATTERY);
+	data->psy_desc.get_property = max8903_get_property;
+	data->psy_desc.properties = max8903_charger_props;
+	data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+	psy_cfg.of_node = dev->of_node;
+	psy_cfg.drv_data = data;
+
+	data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
+	if (IS_ERR(data->psy)) {
+		dev_err(dev, "failed: power supply register.\n");
+		return PTR_ERR(data->psy);
+	}
+
+	if (data->dok) {
+		ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->dok),
+					NULL, max8903_dcin,
+					IRQF_TRIGGER_FALLING |
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"MAX8903 DC IN", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+					gpiod_to_irq(data->dok), ret);
+			return ret;
+		}
+	}
+
+	if (data->uok) {
+		ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->uok),
+					NULL, max8903_usbin,
+					IRQF_TRIGGER_FALLING |
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"MAX8903 USB IN", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+					gpiod_to_irq(data->uok), ret);
+			return ret;
+		}
+	}
+
+	if (data->flt) {
+		ret = devm_request_threaded_irq(dev, gpiod_to_irq(data->flt),
+					NULL, max8903_fault,
+					IRQF_TRIGGER_FALLING |
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"MAX8903 Fault", data);
+		if (ret) {
+			dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+					gpiod_to_irq(data->flt), ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id max8903_match_ids[] = {
+	{ .compatible = "maxim,max8903", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max8903_match_ids);
+
+static struct platform_driver max8903_driver = {
+	.probe	= max8903_probe,
+	.driver = {
+		.name	= "max8903-charger",
+		.of_match_table = max8903_match_ids
+	},
+};
+
+module_platform_driver(max8903_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("platform:max8903-charger");
diff --git a/drivers/power/supply/max8925_power.c b/drivers/power/supply/max8925_power.c
new file mode 100644
index 000000000..8878f9131
--- /dev/null
+++ b/drivers/power/supply/max8925_power.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Maxim MAX8925
+ *
+ * Copyright (c) 2009-2010 Marvell International Ltd.
+ *	Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8925.h>
+
+/* registers in GPM */
+#define MAX8925_OUT5VEN			0x54
+#define MAX8925_OUT3VEN			0x58
+#define MAX8925_CHG_CNTL1		0x7c
+
+/* bits definition */
+#define MAX8925_CHG_STAT_VSYSLOW	(1 << 0)
+#define MAX8925_CHG_STAT_MODE_MASK	(3 << 2)
+#define MAX8925_CHG_STAT_EN_MASK	(1 << 4)
+#define MAX8925_CHG_MBDET		(1 << 1)
+#define MAX8925_CHG_AC_RANGE_MASK	(3 << 6)
+
+/* registers in ADC */
+#define MAX8925_ADC_RES_CNFG1		0x06
+#define MAX8925_ADC_AVG_CNFG1		0x07
+#define MAX8925_ADC_ACQ_CNFG1		0x08
+#define MAX8925_ADC_ACQ_CNFG2		0x09
+/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
+#define MAX8925_ADC_AUX2		0x62
+#define MAX8925_ADC_VCHG		0x64
+#define MAX8925_ADC_VBBATT		0x66
+#define MAX8925_ADC_VMBATT		0x68
+#define MAX8925_ADC_ISNS		0x6a
+#define MAX8925_ADC_THM			0x6c
+#define MAX8925_ADC_TDIE		0x6e
+#define MAX8925_CMD_AUX2		0xc8
+#define MAX8925_CMD_VCHG		0xd0
+#define MAX8925_CMD_VBBATT		0xd8
+#define MAX8925_CMD_VMBATT		0xe0
+#define MAX8925_CMD_ISNS		0xe8
+#define MAX8925_CMD_THM			0xf0
+#define MAX8925_CMD_TDIE		0xf8
+
+enum {
+	MEASURE_AUX2,
+	MEASURE_VCHG,
+	MEASURE_VBBATT,
+	MEASURE_VMBATT,
+	MEASURE_ISNS,
+	MEASURE_THM,
+	MEASURE_TDIE,
+	MEASURE_MAX,
+};
+
+struct max8925_power_info {
+	struct max8925_chip	*chip;
+	struct i2c_client	*gpm;
+	struct i2c_client	*adc;
+
+	struct power_supply	*ac;
+	struct power_supply	*usb;
+	struct power_supply	*battery;
+	int			irq_base;
+	unsigned		ac_online:1;
+	unsigned		usb_online:1;
+	unsigned		bat_online:1;
+	unsigned		chg_mode:2;
+	unsigned		batt_detect:1;	/* detecing MB by ID pin */
+	unsigned		topoff_threshold:2;
+	unsigned		fast_charge:3;
+	unsigned		no_temp_support:1;
+	unsigned		no_insert_detect:1;
+
+	int (*set_charger) (int);
+};
+
+static int __set_charger(struct max8925_power_info *info, int enable)
+{
+	struct max8925_chip *chip = info->chip;
+	if (enable) {
+		/* enable charger in platform */
+		if (info->set_charger)
+			info->set_charger(1);
+		/* enable charger */
+		max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
+	} else {
+		/* disable charge */
+		max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+		if (info->set_charger)
+			info->set_charger(0);
+	}
+	dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
+		: "Disable charger");
+	return 0;
+}
+
+static irqreturn_t max8925_charger_handler(int irq, void *data)
+{
+	struct max8925_power_info *info = (struct max8925_power_info *)data;
+	struct max8925_chip *chip = info->chip;
+
+	switch (irq - chip->irq_base) {
+	case MAX8925_IRQ_VCHG_DC_R:
+		info->ac_online = 1;
+		__set_charger(info, 1);
+		dev_dbg(chip->dev, "Adapter inserted\n");
+		break;
+	case MAX8925_IRQ_VCHG_DC_F:
+		info->ac_online = 0;
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Adapter removed\n");
+		break;
+	case MAX8925_IRQ_VCHG_THM_OK_F:
+		/* Battery is not ready yet */
+		dev_dbg(chip->dev, "Battery temperature is out of range\n");
+		fallthrough;
+	case MAX8925_IRQ_VCHG_DC_OVP:
+		dev_dbg(chip->dev, "Error detection\n");
+		__set_charger(info, 0);
+		break;
+	case MAX8925_IRQ_VCHG_THM_OK_R:
+		/* Battery is ready now */
+		dev_dbg(chip->dev, "Battery temperature is in range\n");
+		break;
+	case MAX8925_IRQ_VCHG_SYSLOW_R:
+		/* VSYS is low */
+		dev_info(chip->dev, "Sys power is too low\n");
+		break;
+	case MAX8925_IRQ_VCHG_SYSLOW_F:
+		dev_dbg(chip->dev, "Sys power is above low threshold\n");
+		break;
+	case MAX8925_IRQ_VCHG_DONE:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Charging is done\n");
+		break;
+	case MAX8925_IRQ_VCHG_TOPOFF:
+		dev_dbg(chip->dev, "Charging in top-off mode\n");
+		break;
+	case MAX8925_IRQ_VCHG_TMR_FAULT:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Safe timer is expired\n");
+		break;
+	case MAX8925_IRQ_VCHG_RST:
+		__set_charger(info, 0);
+		dev_dbg(chip->dev, "Charger is reset\n");
+		break;
+	}
+	return IRQ_HANDLED;
+}
+
+static int start_measure(struct max8925_power_info *info, int type)
+{
+	unsigned char buf[2] = {0, 0};
+	int meas_cmd;
+	int meas_reg = 0, ret;
+
+	switch (type) {
+	case MEASURE_VCHG:
+		meas_cmd = MAX8925_CMD_VCHG;
+		meas_reg = MAX8925_ADC_VCHG;
+		break;
+	case MEASURE_VBBATT:
+		meas_cmd = MAX8925_CMD_VBBATT;
+		meas_reg = MAX8925_ADC_VBBATT;
+		break;
+	case MEASURE_VMBATT:
+		meas_cmd = MAX8925_CMD_VMBATT;
+		meas_reg = MAX8925_ADC_VMBATT;
+		break;
+	case MEASURE_ISNS:
+		meas_cmd = MAX8925_CMD_ISNS;
+		meas_reg = MAX8925_ADC_ISNS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	max8925_reg_write(info->adc, meas_cmd, 0);
+	max8925_bulk_read(info->adc, meas_reg, 2, buf);
+	ret = ((buf[0]<<8) | buf[1]) >> 4;
+
+	return ret;
+}
+
+static int max8925_ac_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->ac_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->ac_online) {
+			ret = start_measure(info, MEASURE_VCHG);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				goto out;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+out:
+	return ret;
+}
+
+static enum power_supply_property max8925_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_usb_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->usb_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->usb_online) {
+			ret = start_measure(info, MEASURE_VCHG);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				goto out;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+out:
+	return ret;
+}
+
+static enum power_supply_property max8925_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_bat_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->bat_online;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->bat_online) {
+			ret = start_measure(info, MEASURE_VMBATT);
+			if (ret >= 0) {
+				val->intval = ret * 2000;	/* unit is uV */
+				ret = 0;
+				break;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (info->bat_online) {
+			ret = start_measure(info, MEASURE_ISNS);
+			if (ret >= 0) {
+				/* assume r_sns is 0.02 */
+				ret = ((ret * 6250) - 3125) /* uA */;
+				val->intval = 0;
+				if (ret > 0)
+					val->intval = ret; /* unit is mA */
+				ret = 0;
+				break;
+			}
+		}
+		ret = -ENODATA;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (!info->bat_online) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+		ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
+		switch (ret) {
+		case 1:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		case 0:
+		case 2:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case 3:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!info->bat_online) {
+			ret = -ENODATA;
+			break;
+		}
+		ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+		if (info->usb_online || info->ac_online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			if (ret & MAX8925_CHG_STAT_EN_MASK)
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		} else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property max8925_battery_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc ac_desc = {
+	.name		= "max8925-ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= max8925_ac_props,
+	.num_properties	= ARRAY_SIZE(max8925_ac_props),
+	.get_property	= max8925_ac_get_prop,
+};
+
+static const struct power_supply_desc usb_desc = {
+	.name		= "max8925-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= max8925_usb_props,
+	.num_properties	= ARRAY_SIZE(max8925_usb_props),
+	.get_property	= max8925_usb_get_prop,
+};
+
+static const struct power_supply_desc battery_desc = {
+	.name		= "max8925-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= max8925_battery_props,
+	.num_properties	= ARRAY_SIZE(max8925_battery_props),
+	.get_property	= max8925_bat_get_prop,
+};
+
+#define REQUEST_IRQ(_irq, _name)					\
+do {									\
+	ret = request_threaded_irq(chip->irq_base + _irq, NULL,		\
+				    max8925_charger_handler,		\
+				    IRQF_ONESHOT, _name, info);		\
+	if (ret)							\
+		dev_err(chip->dev, "Failed to request IRQ #%d: %d\n",	\
+			_irq, ret);					\
+} while (0)
+
+static int max8925_init_charger(struct max8925_chip *chip,
+					  struct max8925_power_info *info)
+{
+	int ret;
+
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
+	if (!info->no_insert_detect) {
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
+	}
+	if (!info->no_temp_support) {
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
+		REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
+	}
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
+	REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
+
+	info->usb_online = 0;
+	info->bat_online = 0;
+
+	/* check for power - can miss interrupt at boot time */
+	if (start_measure(info, MEASURE_VCHG) * 2000 > 500000)
+		info->ac_online = 1;
+	else
+		info->ac_online = 0;
+
+	ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+	if (ret >= 0) {
+		/*
+		 * If battery detection is enabled, ID pin of battery is
+		 * connected to MBDET pin of MAX8925. It could be used to
+		 * detect battery presence.
+		 * Otherwise, we have to assume that battery is always on.
+		 */
+		if (info->batt_detect)
+			info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
+		else
+			info->bat_online = 1;
+		if (ret & MAX8925_CHG_AC_RANGE_MASK)
+			info->ac_online = 1;
+		else
+			info->ac_online = 0;
+	}
+	/* disable charge */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+	/* set charging current in charge topoff mode */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
+			 info->topoff_threshold << 5);
+	/* set charing current in fast charge mode */
+	max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
+
+	return 0;
+}
+
+static int max8925_deinit_charger(struct max8925_power_info *info)
+{
+	struct max8925_chip *chip = info->chip;
+	int irq;
+
+	irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
+	for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
+		free_irq(irq, info);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+	struct device_node *nproot = pdev->dev.parent->of_node;
+	struct device_node *np;
+	int batt_detect;
+	int topoff_threshold;
+	int fast_charge;
+	int no_temp_support;
+	int no_insert_detect;
+	struct max8925_power_pdata *pdata;
+
+	if (!nproot)
+		return pdev->dev.platform_data;
+
+	np = of_get_child_by_name(nproot, "charger");
+	if (!np) {
+		dev_err(&pdev->dev, "failed to find charger node\n");
+		return NULL;
+	}
+
+	pdata = devm_kzalloc(&pdev->dev,
+			sizeof(struct max8925_power_pdata),
+			GFP_KERNEL);
+	if (!pdata)
+		goto ret;
+
+	of_property_read_u32(np, "topoff-threshold", &topoff_threshold);
+	of_property_read_u32(np, "batt-detect", &batt_detect);
+	of_property_read_u32(np, "fast-charge", &fast_charge);
+	of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
+	of_property_read_u32(np, "no-temp-support", &no_temp_support);
+
+	pdata->batt_detect = batt_detect;
+	pdata->fast_charge = fast_charge;
+	pdata->topoff_threshold = topoff_threshold;
+	pdata->no_insert_detect = no_insert_detect;
+	pdata->no_temp_support = no_temp_support;
+
+ret:
+	of_node_put(np);
+	return pdata;
+}
+#else
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+	return pdev->dev.platform_data;
+}
+#endif
+
+static int max8925_power_probe(struct platform_device *pdev)
+{
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {}; /* Only for ac and usb */
+	struct max8925_power_pdata *pdata = NULL;
+	struct max8925_power_info *info;
+	int ret;
+
+	pdata = max8925_power_dt_init(pdev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data isn't assigned to "
+			"power supply\n");
+		return -EINVAL;
+	}
+
+	info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	info->chip = chip;
+	info->gpm = chip->i2c;
+	info->adc = chip->adc;
+	platform_set_drvdata(pdev, info);
+
+	psy_cfg.supplied_to = pdata->supplied_to;
+	psy_cfg.num_supplicants = pdata->num_supplicants;
+
+	info->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg);
+	if (IS_ERR(info->ac)) {
+		ret = PTR_ERR(info->ac);
+		goto out;
+	}
+	info->ac->dev.parent = &pdev->dev;
+
+	info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg);
+	if (IS_ERR(info->usb)) {
+		ret = PTR_ERR(info->usb);
+		goto out_unregister_ac;
+	}
+	info->usb->dev.parent = &pdev->dev;
+
+	info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL);
+	if (IS_ERR(info->battery)) {
+		ret = PTR_ERR(info->battery);
+		goto out_unregister_usb;
+	}
+	info->battery->dev.parent = &pdev->dev;
+
+	info->batt_detect = pdata->batt_detect;
+	info->topoff_threshold = pdata->topoff_threshold;
+	info->fast_charge = pdata->fast_charge;
+	info->set_charger = pdata->set_charger;
+	info->no_temp_support = pdata->no_temp_support;
+	info->no_insert_detect = pdata->no_insert_detect;
+
+	max8925_init_charger(chip, info);
+	return 0;
+out_unregister_usb:
+	power_supply_unregister(info->usb);
+out_unregister_ac:
+	power_supply_unregister(info->ac);
+out:
+	return ret;
+}
+
+static int max8925_power_remove(struct platform_device *pdev)
+{
+	struct max8925_power_info *info = platform_get_drvdata(pdev);
+
+	if (info) {
+		power_supply_unregister(info->ac);
+		power_supply_unregister(info->usb);
+		power_supply_unregister(info->battery);
+		max8925_deinit_charger(info);
+	}
+	return 0;
+}
+
+static struct platform_driver max8925_power_driver = {
+	.probe	= max8925_power_probe,
+	.remove	= max8925_power_remove,
+	.driver	= {
+		.name	= "max8925-power",
+	},
+};
+
+module_platform_driver(max8925_power_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for MAX8925");
+MODULE_ALIAS("platform:max8925-power");
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
new file mode 100644
index 000000000..1ec3535a2
--- /dev/null
+++ b/drivers/power/supply/max8997_charger.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
+//
+//  Copyright (C) 2011 Samsung Electronics
+//  MyungJoo Ham <myungjoo.ham@samsung.com>
+
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/regulator/consumer.h>
+#include <linux/devm-helpers.h>
+
+/* MAX8997_REG_STATUS4 */
+#define DCINOK_SHIFT		1
+#define DCINOK_MASK		(1 << DCINOK_SHIFT)
+#define DETBAT_SHIFT		2
+#define DETBAT_MASK		(1 << DETBAT_SHIFT)
+
+/* MAX8997_REG_MBCCTRL1 */
+#define TFCH_SHIFT		4
+#define TFCH_MASK		(7 << TFCH_SHIFT)
+
+/* MAX8997_REG_MBCCTRL5 */
+#define ITOPOFF_SHIFT		0
+#define ITOPOFF_MASK		(0xF << ITOPOFF_SHIFT)
+
+struct charger_data {
+	struct device *dev;
+	struct max8997_dev *iodev;
+	struct power_supply *battery;
+	struct regulator *reg;
+	struct extcon_dev *edev;
+	struct notifier_block extcon_nb;
+	struct work_struct extcon_work;
+};
+
+static enum power_supply_property max8997_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS, /* "FULL", "CHARGING" or "DISCHARGING". */
+	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8997_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct charger_data *charger = power_supply_get_drvdata(psy);
+	struct i2c_client *i2c = charger->iodev->i2c;
+	int ret;
+	u8 reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		if ((reg & (1 << 0)) == 0x1)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if ((reg & DCINOK_MASK))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		if ((reg & DETBAT_MASK) == 0x0)
+			val->intval = 1;
+
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = 0;
+		ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+		if (ret)
+			return ret;
+		if (reg & DCINOK_MASK)
+			val->intval = 1;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void max8997_battery_extcon_evt_worker(struct work_struct *work)
+{
+	struct charger_data *charger =
+	    container_of(work, struct charger_data, extcon_work);
+	struct extcon_dev *edev = charger->edev;
+	int current_limit;
+
+	if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
+		dev_dbg(charger->dev, "USB SDP charger is connected\n");
+		current_limit = 450000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
+		dev_dbg(charger->dev, "USB DCP charger is connected\n");
+		current_limit = 650000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) {
+		dev_dbg(charger->dev, "USB FAST charger is connected\n");
+		current_limit = 650000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) {
+		dev_dbg(charger->dev, "USB SLOW charger is connected\n");
+		current_limit = 650000;
+	} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
+		dev_dbg(charger->dev, "USB CDP charger is connected\n");
+		current_limit = 650000;
+	} else {
+		dev_dbg(charger->dev, "USB charger is disconnected\n");
+		current_limit = -1;
+	}
+
+	if (current_limit > 0) {
+		int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit);
+
+		if (ret) {
+			dev_err(charger->dev, "failed to set current limit: %d\n", ret);
+			return;
+		}
+		ret = regulator_enable(charger->reg);
+		if (ret)
+			dev_err(charger->dev, "failed to enable regulator: %d\n", ret);
+	} else {
+		int ret  = regulator_disable(charger->reg);
+
+		if (ret)
+			dev_err(charger->dev, "failed to disable regulator: %d\n", ret);
+	}
+}
+
+static int max8997_battery_extcon_evt(struct notifier_block *nb,
+				unsigned long event, void *param)
+{
+	struct charger_data *charger =
+		container_of(nb, struct charger_data, extcon_nb);
+	schedule_work(&charger->extcon_work);
+	return NOTIFY_OK;
+}
+
+static const struct power_supply_desc max8997_battery_desc = {
+	.name		= "max8997_pmic",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= max8997_battery_get_property,
+	.properties	= max8997_battery_props,
+	.num_properties	= ARRAY_SIZE(max8997_battery_props),
+};
+
+static int max8997_battery_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct charger_data *charger;
+	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *np = pdev->dev.of_node;
+	struct i2c_client *i2c = iodev->i2c;
+	struct max8997_platform_data *pdata = iodev->pdata;
+	struct power_supply_config psy_cfg = {};
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data supplied.\n");
+		return -EINVAL;
+	}
+
+	if (pdata->eoc_mA) {
+		int val = (pdata->eoc_mA - 50) / 10;
+		if (val < 0)
+			val = 0;
+		if (val > 0xf)
+			val = 0xf;
+
+		ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL5,
+				val << ITOPOFF_SHIFT, ITOPOFF_MASK);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+			return ret;
+		}
+	}
+	switch (pdata->timeout) {
+	case 5:
+		ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
+				0x2 << TFCH_SHIFT, TFCH_MASK);
+		break;
+	case 6:
+		ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
+				0x3 << TFCH_SHIFT, TFCH_MASK);
+		break;
+	case 7:
+		ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
+				0x4 << TFCH_SHIFT, TFCH_MASK);
+		break;
+	case 0:
+		ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
+				0x7 << TFCH_SHIFT, TFCH_MASK);
+		break;
+	default:
+		dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
+				pdata->timeout);
+		return -EINVAL;
+	}
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+		return ret;
+	}
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, charger);
+
+	charger->dev = &pdev->dev;
+	charger->iodev = iodev;
+
+	psy_cfg.drv_data = charger;
+
+	charger->battery = devm_power_supply_register(&pdev->dev,
+						 &max8997_battery_desc,
+						 &psy_cfg);
+	if (IS_ERR(charger->battery)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		return PTR_ERR(charger->battery);
+	}
+
+	// grab regulator from parent device's node
+	pdev->dev.of_node = iodev->dev->of_node;
+	charger->reg = devm_regulator_get_optional(&pdev->dev, "charger");
+	pdev->dev.of_node = np;
+	if (IS_ERR(charger->reg)) {
+		if (PTR_ERR(charger->reg) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(&pdev->dev, "couldn't get charger regulator\n");
+	}
+	charger->edev = extcon_get_extcon_dev("max8997-muic");
+	if (IS_ERR(charger->edev)) {
+		dev_err_probe(charger->dev, PTR_ERR(charger->edev),
+			      "couldn't get extcon device: max8997-muic\n");
+		return PTR_ERR(charger->edev);
+	}
+
+	if (!IS_ERR(charger->reg) && !IS_ERR_OR_NULL(charger->edev)) {
+		ret = devm_work_autocancel(&pdev->dev, &charger->extcon_work,
+					   max8997_battery_extcon_evt_worker);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret);
+			return ret;
+		}
+		charger->extcon_nb.notifier_call = max8997_battery_extcon_evt;
+		ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev,
+							&charger->extcon_nb);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register extcon notifier\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id max8997_battery_id[] = {
+	{ "max8997-battery", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max8997_battery_id);
+
+static struct platform_driver max8997_battery_driver = {
+	.driver = {
+		.name = "max8997-battery",
+	},
+	.probe = max8997_battery_probe,
+	.id_table = max8997_battery_id,
+};
+module_platform_driver(max8997_battery_driver);
+
+MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c
new file mode 100644
index 000000000..c26023b19
--- /dev/null
+++ b/drivers/power/supply/max8998_charger.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974
+//
+//  Copyright (C) 2009-2010 Samsung Electronics
+//  MyungJoo Ham <myungjoo.ham@samsung.com>
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_battery_data {
+	struct device *dev;
+	struct max8998_dev *iodev;
+	struct power_supply *battery;
+};
+
+static enum power_supply_property max8998_battery_props[] = {
+	POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+	POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+	POWER_SUPPLY_PROP_STATUS, /* charger is charging/discharging/full */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8998_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct max8998_battery_data *max8998 = power_supply_get_drvdata(psy);
+	struct i2c_client *i2c = max8998->iodev->i2c;
+	int ret;
+	u8 reg;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+		if (reg & (1 << 4))
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+
+		if (reg & (1 << 5))
+			val->intval = 1;
+		else
+			val->intval = 0;
+
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+		if (ret)
+			return ret;
+
+		if (!(reg & (1 << 5))) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		} else {
+			if (reg & (1 << 6))
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else if (reg & (1 << 3))
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct power_supply_desc max8998_battery_desc = {
+	.name		= "max8998_pmic",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= max8998_battery_get_property,
+	.properties	= max8998_battery_props,
+	.num_properties	= ARRAY_SIZE(max8998_battery_props),
+};
+
+static int max8998_battery_probe(struct platform_device *pdev)
+{
+	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max8998_platform_data *pdata = iodev->pdata;
+	struct power_supply_config psy_cfg = {};
+	struct max8998_battery_data *max8998;
+	struct i2c_client *i2c;
+	int ret = 0;
+
+	if (!pdata) {
+		dev_err(pdev->dev.parent, "No platform init data supplied\n");
+		return -ENODEV;
+	}
+
+	max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_battery_data),
+				GFP_KERNEL);
+	if (!max8998)
+		return -ENOMEM;
+
+	max8998->dev = &pdev->dev;
+	max8998->iodev = iodev;
+	platform_set_drvdata(pdev, max8998);
+	i2c = max8998->iodev->i2c;
+
+	/* Setup "End of Charge" */
+	/* If EOC value equals 0,
+	 * remain value set from bootloader or default value */
+	if (pdata->eoc >= 10 && pdata->eoc <= 45) {
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1,
+				(pdata->eoc / 5 - 2) << 5, 0x7 << 5);
+	} else if (pdata->eoc == 0) {
+		dev_dbg(max8998->dev,
+			"EOC value not set: leave it unchanged.\n");
+	} else {
+		dev_err(max8998->dev, "Invalid EOC value\n");
+		return -EINVAL;
+	}
+
+	/* Setup Charge Restart Level */
+	switch (pdata->restart) {
+	case 100:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x1 << 3, 0x3 << 3);
+		break;
+	case 150:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x0 << 3, 0x3 << 3);
+		break;
+	case 200:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x2 << 3, 0x3 << 3);
+		break;
+	case -1:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x3 << 3, 0x3 << 3);
+		break;
+	case 0:
+		dev_dbg(max8998->dev,
+			"Restart Level not set: leave it unchanged.\n");
+		break;
+	default:
+		dev_err(max8998->dev, "Invalid Restart Level\n");
+		return -EINVAL;
+	}
+
+	/* Setup Charge Full Timeout */
+	switch (pdata->timeout) {
+	case 5:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x0 << 4, 0x3 << 4);
+		break;
+	case 6:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x1 << 4, 0x3 << 4);
+		break;
+	case 7:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x2 << 4, 0x3 << 4);
+		break;
+	case -1:
+		max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x3 << 4, 0x3 << 4);
+		break;
+	case 0:
+		dev_dbg(max8998->dev,
+			"Full Timeout not set: leave it unchanged.\n");
+		break;
+	default:
+		dev_err(max8998->dev, "Invalid Full Timeout value\n");
+		return -EINVAL;
+	}
+
+	psy_cfg.drv_data = max8998;
+
+	max8998->battery = devm_power_supply_register(max8998->dev,
+						      &max8998_battery_desc,
+						      &psy_cfg);
+	if (IS_ERR(max8998->battery)) {
+		ret = PTR_ERR(max8998->battery);
+		dev_err(max8998->dev, "failed: power supply register: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id max8998_battery_id[] = {
+	{ "max8998-battery", TYPE_MAX8998 },
+	{ }
+};
+
+static struct platform_driver max8998_battery_driver = {
+	.driver = {
+		.name = "max8998-battery",
+	},
+	.probe = max8998_battery_probe,
+	.id_table = max8998_battery_id,
+};
+
+module_platform_driver(max8998_battery_driver);
+
+MODULE_DESCRIPTION("MAXIM 8998 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8998-battery");
diff --git a/drivers/power/supply/mp2629_charger.c b/drivers/power/supply/mp2629_charger.c
new file mode 100644
index 000000000..bf9c27b46
--- /dev/null
+++ b/drivers/power/supply/mp2629_charger.c
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MP2629 battery charger driver
+ *
+ * Copyright 2020 Monolithic Power Systems, Inc
+ *
+ * Author: Saravanan Sekar <sravanhome@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mp2629.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MP2629_REG_INPUT_ILIM		0x00
+#define MP2629_REG_INPUT_VLIM		0x01
+#define MP2629_REG_CHARGE_CTRL		0x04
+#define MP2629_REG_CHARGE_ILIM		0x05
+#define MP2629_REG_PRECHARGE		0x06
+#define MP2629_REG_TERM_CURRENT		0x06
+#define MP2629_REG_CHARGE_VLIM		0x07
+#define MP2629_REG_TIMER_CTRL		0x08
+#define MP2629_REG_IMPEDANCE_COMP	0x09
+#define MP2629_REG_INTERRUPT		0x0b
+#define MP2629_REG_STATUS		0x0c
+#define MP2629_REG_FAULT		0x0d
+
+#define MP2629_MASK_INPUT_TYPE		GENMASK(7, 5)
+#define MP2629_MASK_CHARGE_TYPE		GENMASK(4, 3)
+#define MP2629_MASK_CHARGE_CTRL		GENMASK(5, 4)
+#define MP2629_MASK_WDOG_CTRL		GENMASK(5, 4)
+#define MP2629_MASK_IMPEDANCE		GENMASK(7, 4)
+
+#define MP2629_INPUTSOURCE_CHANGE	GENMASK(7, 5)
+#define MP2629_CHARGING_CHANGE		GENMASK(4, 3)
+#define MP2629_FAULT_BATTERY		BIT(3)
+#define MP2629_FAULT_THERMAL		BIT(4)
+#define MP2629_FAULT_INPUT		BIT(5)
+#define MP2629_FAULT_OTG		BIT(6)
+
+#define MP2629_MAX_BATT_CAPACITY	100
+
+#define MP2629_PROPS(_idx, _min, _max, _step)		\
+	[_idx] = {					\
+		.min	= _min,				\
+		.max	= _max,				\
+		.step	= _step,			\
+}
+
+enum mp2629_source_type {
+	MP2629_SOURCE_TYPE_NO_INPUT,
+	MP2629_SOURCE_TYPE_NON_STD,
+	MP2629_SOURCE_TYPE_SDP,
+	MP2629_SOURCE_TYPE_CDP,
+	MP2629_SOURCE_TYPE_DCP,
+	MP2629_SOURCE_TYPE_OTG = 7,
+};
+
+enum mp2629_field {
+	INPUT_ILIM,
+	INPUT_VLIM,
+	CHARGE_ILIM,
+	CHARGE_VLIM,
+	PRECHARGE,
+	TERM_CURRENT,
+	MP2629_MAX_FIELD
+};
+
+struct mp2629_charger {
+	struct device *dev;
+	int status;
+	int fault;
+
+	struct regmap *regmap;
+	struct regmap_field *regmap_fields[MP2629_MAX_FIELD];
+	struct mutex lock;
+	struct power_supply *usb;
+	struct power_supply *battery;
+	struct iio_channel *iiochan[MP2629_ADC_CHAN_END];
+};
+
+struct mp2629_prop {
+	int reg;
+	int mask;
+	int min;
+	int max;
+	int step;
+	int shift;
+};
+
+static enum power_supply_usb_type mp2629_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_PD_DRP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN
+};
+
+static enum power_supply_property mp2629_charger_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+};
+
+static enum power_supply_property mp2629_charger_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static struct mp2629_prop props[] = {
+	MP2629_PROPS(INPUT_ILIM, 100000, 3250000, 50000),
+	MP2629_PROPS(INPUT_VLIM, 3800000, 5300000, 100000),
+	MP2629_PROPS(CHARGE_ILIM, 320000, 4520000, 40000),
+	MP2629_PROPS(CHARGE_VLIM, 3400000, 4670000, 10000),
+	MP2629_PROPS(PRECHARGE, 120000, 720000, 40000),
+	MP2629_PROPS(TERM_CURRENT, 80000, 680000, 40000),
+};
+
+static const struct reg_field mp2629_reg_fields[] = {
+	[INPUT_ILIM]	= REG_FIELD(MP2629_REG_INPUT_ILIM, 0, 5),
+	[INPUT_VLIM]	= REG_FIELD(MP2629_REG_INPUT_VLIM, 0, 3),
+	[CHARGE_ILIM]	= REG_FIELD(MP2629_REG_CHARGE_ILIM, 0, 6),
+	[CHARGE_VLIM]	= REG_FIELD(MP2629_REG_CHARGE_VLIM, 1, 7),
+	[PRECHARGE]	= REG_FIELD(MP2629_REG_PRECHARGE, 4, 7),
+	[TERM_CURRENT]	= REG_FIELD(MP2629_REG_TERM_CURRENT, 0, 3),
+};
+
+static char *adc_chan_name[] = {
+	"mp2629-batt-volt",
+	"mp2629-system-volt",
+	"mp2629-input-volt",
+	"mp2629-batt-current",
+	"mp2629-input-current",
+};
+
+static int mp2629_read_adc(struct mp2629_charger *charger,
+			   enum mp2629_adc_chan ch,
+			   union power_supply_propval *val)
+{
+	int ret;
+	int chval;
+
+	ret = iio_read_channel_processed(charger->iiochan[ch], &chval);
+	if (ret)
+		return ret;
+
+	val->intval = chval * 1000;
+
+	return 0;
+}
+
+static int mp2629_get_prop(struct mp2629_charger *charger,
+			   enum mp2629_field fld,
+			   union power_supply_propval *val)
+{
+	int ret;
+	unsigned int rval;
+
+	ret = regmap_field_read(charger->regmap_fields[fld], &rval);
+	if (ret)
+		return ret;
+
+	val->intval = rval * props[fld].step + props[fld].min;
+
+	return 0;
+}
+
+static int mp2629_set_prop(struct mp2629_charger *charger,
+			   enum mp2629_field fld,
+			   const union power_supply_propval *val)
+{
+	unsigned int rval;
+
+	if (val->intval < props[fld].min || val->intval > props[fld].max)
+		return -EINVAL;
+
+	rval = (val->intval - props[fld].min) / props[fld].step;
+	return regmap_field_write(charger->regmap_fields[fld], rval);
+}
+
+static int mp2629_get_battery_capacity(struct mp2629_charger *charger,
+				       union power_supply_propval *val)
+{
+	union power_supply_propval vnow, vlim;
+	int ret;
+
+	ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, &vnow);
+	if (ret)
+		return ret;
+
+	ret = mp2629_get_prop(charger, CHARGE_VLIM, &vlim);
+	if (ret)
+		return ret;
+
+	val->intval = (vnow.intval * 100) / vlim.intval;
+	val->intval = min(val->intval, MP2629_MAX_BATT_CAPACITY);
+
+	return 0;
+}
+
+static int mp2629_charger_battery_get_prop(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+	unsigned int rval;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = mp2629_read_adc(charger, MP2629_BATT_CURRENT, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = 4520000;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = 4670000;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = mp2629_get_battery_capacity(charger, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = mp2629_get_prop(charger, TERM_CURRENT, val);
+		break;
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = mp2629_get_prop(charger, PRECHARGE, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = mp2629_get_prop(charger, CHARGE_VLIM, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = mp2629_get_prop(charger, CHARGE_ILIM, val);
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (!charger->fault)
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		if (MP2629_FAULT_BATTERY & charger->fault)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else if (MP2629_FAULT_THERMAL & charger->fault)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (MP2629_FAULT_INPUT & charger->fault)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+		if (ret)
+			break;
+
+		rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
+		switch (rval) {
+		case 0x00:
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			break;
+		case 0x01:
+		case 0x10:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0x11:
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+		if (ret)
+			break;
+
+		rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
+		switch (rval) {
+		case 0x00:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		case 0x01:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case 0x10:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int mp2629_charger_battery_set_prop(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return mp2629_set_prop(charger, TERM_CURRENT, val);
+
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return mp2629_set_prop(charger, PRECHARGE, val);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return mp2629_set_prop(charger, CHARGE_VLIM, val);
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return mp2629_set_prop(charger, CHARGE_ILIM, val);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mp2629_charger_usb_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+	unsigned int rval;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+		if (ret)
+			break;
+
+		val->intval = !!(rval & MP2629_MASK_INPUT_TYPE);
+		break;
+
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+		if (ret)
+			break;
+
+		rval = (rval & MP2629_MASK_INPUT_TYPE) >> 5;
+		switch (rval) {
+		case MP2629_SOURCE_TYPE_SDP:
+			val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+			break;
+		case MP2629_SOURCE_TYPE_CDP:
+			val->intval = POWER_SUPPLY_USB_TYPE_CDP;
+			break;
+		case MP2629_SOURCE_TYPE_DCP:
+			val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+			break;
+		case MP2629_SOURCE_TYPE_OTG:
+			val->intval = POWER_SUPPLY_USB_TYPE_PD_DRP;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+			break;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = mp2629_read_adc(charger, MP2629_INPUT_VOLT, val);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = mp2629_read_adc(charger, MP2629_INPUT_CURRENT, val);
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = mp2629_get_prop(charger, INPUT_VLIM, val);
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = mp2629_get_prop(charger, INPUT_ILIM, val);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int mp2629_charger_usb_set_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return mp2629_set_prop(charger, INPUT_VLIM, val);
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return mp2629_set_prop(charger, INPUT_ILIM, val);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mp2629_charger_battery_prop_writeable(struct power_supply *psy,
+				     enum power_supply_property psp)
+{
+	return (psp == POWER_SUPPLY_PROP_PRECHARGE_CURRENT) ||
+	       (psp == POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT) ||
+	       (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT) ||
+	       (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE);
+}
+
+static int mp2629_charger_usb_prop_writeable(struct power_supply *psy,
+				     enum power_supply_property psp)
+{
+	return (psp == POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT) ||
+	       (psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT);
+}
+
+static irqreturn_t mp2629_irq_handler(int irq, void *dev_id)
+{
+	struct mp2629_charger *charger = dev_id;
+	unsigned int rval;
+	int ret;
+
+	mutex_lock(&charger->lock);
+
+	ret = regmap_read(charger->regmap, MP2629_REG_FAULT, &rval);
+	if (ret)
+		goto unlock;
+
+	if (rval) {
+		charger->fault = rval;
+		if (MP2629_FAULT_BATTERY & rval)
+			dev_err(charger->dev, "Battery fault OVP\n");
+		else if (MP2629_FAULT_THERMAL & rval)
+			dev_err(charger->dev, "Thermal shutdown fault\n");
+		else if (MP2629_FAULT_INPUT & rval)
+			dev_err(charger->dev, "no input or input OVP\n");
+		else if (MP2629_FAULT_OTG & rval)
+			dev_err(charger->dev, "VIN overloaded\n");
+
+		goto unlock;
+	}
+
+	ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+	if (ret)
+		goto unlock;
+
+	if (rval & MP2629_INPUTSOURCE_CHANGE)
+		power_supply_changed(charger->usb);
+	else if (rval & MP2629_CHARGING_CHANGE)
+		power_supply_changed(charger->battery);
+
+unlock:
+	mutex_unlock(&charger->lock);
+
+	return IRQ_HANDLED;
+}
+
+static const struct power_supply_desc mp2629_usb_desc = {
+	.name		= "mp2629_usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.usb_types      = mp2629_usb_types,
+	.num_usb_types  = ARRAY_SIZE(mp2629_usb_types),
+	.properties	= mp2629_charger_usb_props,
+	.num_properties	= ARRAY_SIZE(mp2629_charger_usb_props),
+	.get_property	= mp2629_charger_usb_get_prop,
+	.set_property	= mp2629_charger_usb_set_prop,
+	.property_is_writeable = mp2629_charger_usb_prop_writeable,
+};
+
+static const struct power_supply_desc mp2629_battery_desc = {
+	.name		= "mp2629_battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= mp2629_charger_bat_props,
+	.num_properties	= ARRAY_SIZE(mp2629_charger_bat_props),
+	.get_property	= mp2629_charger_battery_get_prop,
+	.set_property	= mp2629_charger_battery_set_prop,
+	.property_is_writeable = mp2629_charger_battery_prop_writeable,
+};
+
+static ssize_t batt_impedance_compensation_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+	unsigned int rval;
+	int ret;
+
+	ret = regmap_read(charger->regmap, MP2629_REG_IMPEDANCE_COMP, &rval);
+	if (ret)
+		return ret;
+
+	rval = (rval >> 4) * 10;
+	return sprintf(buf, "%d mohm\n", rval);
+}
+
+static ssize_t batt_impedance_compensation_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf,
+					    size_t count)
+{
+	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > 140)
+		return -ERANGE;
+
+	/* multiples of 10 mohm so round off */
+	val = val / 10;
+	ret = regmap_update_bits(charger->regmap, MP2629_REG_IMPEDANCE_COMP,
+					MP2629_MASK_IMPEDANCE, val << 4);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(batt_impedance_compensation);
+
+static struct attribute *mp2629_charger_sysfs_attrs[] = {
+	&dev_attr_batt_impedance_compensation.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(mp2629_charger_sysfs);
+
+static void mp2629_charger_disable(void *data)
+{
+	struct mp2629_charger *charger = data;
+
+	regmap_update_bits(charger->regmap, MP2629_REG_CHARGE_CTRL,
+					MP2629_MASK_CHARGE_CTRL, 0);
+}
+
+static int mp2629_charger_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mp2629_data *ddata = dev_get_drvdata(dev->parent);
+	struct mp2629_charger *charger;
+	struct power_supply_config psy_cfg = {};
+	int ret, i, irq;
+
+	charger = devm_kzalloc(dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->regmap = ddata->regmap;
+	charger->dev = dev;
+	platform_set_drvdata(pdev, charger);
+
+	irq = platform_get_irq(to_platform_device(dev->parent), 0);
+	if (irq < 0)
+		return irq;
+
+	for (i = 0; i < MP2629_MAX_FIELD; i++) {
+		charger->regmap_fields[i] = devm_regmap_field_alloc(dev,
+					charger->regmap, mp2629_reg_fields[i]);
+		if (IS_ERR(charger->regmap_fields[i])) {
+			dev_err(dev, "regmap field alloc fail %d\n", i);
+			return PTR_ERR(charger->regmap_fields[i]);
+		}
+	}
+
+	for (i = 0; i < MP2629_ADC_CHAN_END; i++) {
+		charger->iiochan[i] = devm_iio_channel_get(dev,
+							adc_chan_name[i]);
+		if (IS_ERR(charger->iiochan[i])) {
+			dev_err(dev, "iio chan get %s err\n", adc_chan_name[i]);
+			return PTR_ERR(charger->iiochan[i]);
+		}
+	}
+
+	ret = devm_add_action_or_reset(dev, mp2629_charger_disable, charger);
+	if (ret)
+		return ret;
+
+	charger->usb = devm_power_supply_register(dev, &mp2629_usb_desc, NULL);
+	if (IS_ERR(charger->usb)) {
+		dev_err(dev, "power supply register usb failed\n");
+		return PTR_ERR(charger->usb);
+	}
+
+	psy_cfg.drv_data = charger;
+	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+	charger->battery = devm_power_supply_register(dev,
+					 &mp2629_battery_desc, &psy_cfg);
+	if (IS_ERR(charger->battery)) {
+		dev_err(dev, "power supply register battery failed\n");
+		return PTR_ERR(charger->battery);
+	}
+
+	ret = regmap_update_bits(charger->regmap, MP2629_REG_CHARGE_CTRL,
+					MP2629_MASK_CHARGE_CTRL, BIT(4));
+	if (ret) {
+		dev_err(dev, "enable charge fail: %d\n", ret);
+		return ret;
+	}
+
+	regmap_update_bits(charger->regmap, MP2629_REG_TIMER_CTRL,
+					MP2629_MASK_WDOG_CTRL, 0);
+
+	mutex_init(&charger->lock);
+
+	ret = devm_request_threaded_irq(dev, irq, NULL,	mp2629_irq_handler,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"mp2629-charger", charger);
+	if (ret) {
+		dev_err(dev, "failed to request gpio IRQ\n");
+		return ret;
+	}
+
+	regmap_update_bits(charger->regmap, MP2629_REG_INTERRUPT,
+				GENMASK(6, 5), BIT(6) | BIT(5));
+
+	return 0;
+}
+
+static const struct of_device_id mp2629_charger_of_match[] = {
+	{ .compatible = "mps,mp2629_charger"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp2629_charger_of_match);
+
+static struct platform_driver mp2629_charger_driver = {
+	.driver = {
+		.name = "mp2629_charger",
+		.of_match_table = mp2629_charger_of_match,
+	},
+	.probe		= mp2629_charger_probe,
+};
+module_platform_driver(mp2629_charger_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
+MODULE_DESCRIPTION("MP2629 Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/mt6360_charger.c b/drivers/power/supply/mt6360_charger.c
new file mode 100644
index 000000000..f1248faf5
--- /dev/null
+++ b/drivers/power/supply/mt6360_charger.c
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define MT6360_PMU_CHG_CTRL1	0x311
+#define MT6360_PMU_CHG_CTRL2	0x312
+#define MT6360_PMU_CHG_CTRL3	0x313
+#define MT6360_PMU_CHG_CTRL4	0x314
+#define MT6360_PMU_CHG_CTRL5	0x315
+#define MT6360_PMU_CHG_CTRL6	0x316
+#define MT6360_PMU_CHG_CTRL7	0x317
+#define MT6360_PMU_CHG_CTRL8	0x318
+#define MT6360_PMU_CHG_CTRL9	0x319
+#define MT6360_PMU_CHG_CTRL10	0x31A
+#define MT6360_PMU_DEVICE_TYPE	0x322
+#define MT6360_PMU_USB_STATUS1	0x327
+#define MT6360_PMU_CHG_STAT	0x34A
+#define MT6360_PMU_CHG_CTRL19	0x361
+#define MT6360_PMU_FOD_STAT	0x3E7
+
+/* MT6360_PMU_CHG_CTRL1 */
+#define MT6360_FSLP_SHFT	(3)
+#define MT6360_FSLP_MASK	BIT(MT6360_FSLP_SHFT)
+#define MT6360_OPA_MODE_SHFT	(0)
+#define MT6360_OPA_MODE_MASK	BIT(MT6360_OPA_MODE_SHFT)
+/* MT6360_PMU_CHG_CTRL2 */
+#define MT6360_IINLMTSEL_SHFT	(2)
+#define MT6360_IINLMTSEL_MASK	GENMASK(3, 2)
+/* MT6360_PMU_CHG_CTRL3 */
+#define MT6360_IAICR_SHFT	(2)
+#define MT6360_IAICR_MASK	GENMASK(7, 2)
+#define MT6360_ILIM_EN_MASK	BIT(0)
+/* MT6360_PMU_CHG_CTRL4 */
+#define MT6360_VOREG_SHFT	(1)
+#define MT6360_VOREG_MASK	GENMASK(7, 1)
+/* MT6360_PMU_CHG_CTRL5 */
+#define MT6360_VOBST_MASK	GENMASK(7, 2)
+/* MT6360_PMU_CHG_CTRL6 */
+#define MT6360_VMIVR_SHFT      (1)
+#define MT6360_VMIVR_MASK      GENMASK(7, 1)
+/* MT6360_PMU_CHG_CTRL7 */
+#define MT6360_ICHG_SHFT	(2)
+#define MT6360_ICHG_MASK	GENMASK(7, 2)
+/* MT6360_PMU_CHG_CTRL8 */
+#define MT6360_IPREC_SHFT	(0)
+#define MT6360_IPREC_MASK	GENMASK(3, 0)
+/* MT6360_PMU_CHG_CTRL9 */
+#define MT6360_IEOC_SHFT	(4)
+#define MT6360_IEOC_MASK	GENMASK(7, 4)
+/* MT6360_PMU_CHG_CTRL10 */
+#define MT6360_OTG_OC_MASK	GENMASK(3, 0)
+/* MT6360_PMU_DEVICE_TYPE */
+#define MT6360_USBCHGEN_MASK	BIT(7)
+/* MT6360_PMU_USB_STATUS1 */
+#define MT6360_USB_STATUS_SHFT	(4)
+#define MT6360_USB_STATUS_MASK	GENMASK(6, 4)
+/* MT6360_PMU_CHG_STAT */
+#define MT6360_CHG_STAT_SHFT	(6)
+#define MT6360_CHG_STAT_MASK	GENMASK(7, 6)
+#define MT6360_VBAT_LVL_MASK	BIT(5)
+/* MT6360_PMU_CHG_CTRL19 */
+#define MT6360_VINOVP_SHFT	(5)
+#define MT6360_VINOVP_MASK	GENMASK(6, 5)
+/* MT6360_PMU_FOD_STAT */
+#define MT6360_CHRDET_EXT_MASK	BIT(4)
+
+/* uV */
+#define MT6360_VMIVR_MIN	3900000
+#define MT6360_VMIVR_MAX	13400000
+#define MT6360_VMIVR_STEP	100000
+/* uA */
+#define MT6360_ICHG_MIN		100000
+#define MT6360_ICHG_MAX		5000000
+#define MT6360_ICHG_STEP	100000
+/* uV */
+#define MT6360_VOREG_MIN	3900000
+#define MT6360_VOREG_MAX	4710000
+#define MT6360_VOREG_STEP	10000
+/* uA */
+#define MT6360_AICR_MIN		100000
+#define MT6360_AICR_MAX		3250000
+#define MT6360_AICR_STEP	50000
+/* uA */
+#define MT6360_IPREC_MIN	100000
+#define MT6360_IPREC_MAX	850000
+#define MT6360_IPREC_STEP	50000
+/* uA */
+#define MT6360_IEOC_MIN		100000
+#define MT6360_IEOC_MAX		850000
+#define MT6360_IEOC_STEP	50000
+
+enum {
+	MT6360_RANGE_VMIVR,
+	MT6360_RANGE_ICHG,
+	MT6360_RANGE_VOREG,
+	MT6360_RANGE_AICR,
+	MT6360_RANGE_IPREC,
+	MT6360_RANGE_IEOC,
+	MT6360_RANGE_MAX,
+};
+
+#define MT6360_LINEAR_RANGE(idx, _min, _min_sel, _max_sel, _step) \
+	[idx] = REGULATOR_LINEAR_RANGE(_min, _min_sel, _max_sel, _step)
+
+static const struct linear_range mt6360_chg_range[MT6360_RANGE_MAX] = {
+	MT6360_LINEAR_RANGE(MT6360_RANGE_VMIVR, 3900000, 0, 0x5F, 100000),
+	MT6360_LINEAR_RANGE(MT6360_RANGE_ICHG, 100000, 0, 0x31, 100000),
+	MT6360_LINEAR_RANGE(MT6360_RANGE_VOREG, 3900000, 0, 0x51, 10000),
+	MT6360_LINEAR_RANGE(MT6360_RANGE_AICR, 100000, 0, 0x3F, 50000),
+	MT6360_LINEAR_RANGE(MT6360_RANGE_IPREC, 100000, 0, 0x0F, 50000),
+	MT6360_LINEAR_RANGE(MT6360_RANGE_IEOC, 100000, 0, 0x0F, 50000),
+};
+
+struct mt6360_chg_info {
+	struct device *dev;
+	struct regmap *regmap;
+	struct power_supply_desc psy_desc;
+	struct power_supply *psy;
+	struct regulator_dev *otg_rdev;
+	struct mutex chgdet_lock;
+	u32 vinovp;
+	bool pwr_rdy;
+	bool bc12_en;
+	int psy_usb_type;
+	struct work_struct chrdet_work;
+};
+
+enum mt6360_iinlmtsel {
+	MT6360_IINLMTSEL_AICR_3250 = 0,
+	MT6360_IINLMTSEL_CHG_TYPE,
+	MT6360_IINLMTSEL_AICR,
+	MT6360_IINLMTSEL_LOWER_LEVEL,
+};
+
+enum mt6360_pmu_chg_type {
+	MT6360_CHG_TYPE_NOVBUS = 0,
+	MT6360_CHG_TYPE_UNDER_GOING,
+	MT6360_CHG_TYPE_SDP,
+	MT6360_CHG_TYPE_SDPNSTD,
+	MT6360_CHG_TYPE_DCP,
+	MT6360_CHG_TYPE_CDP,
+	MT6360_CHG_TYPE_DISABLE_BC12,
+	MT6360_CHG_TYPE_MAX,
+};
+
+static enum power_supply_usb_type mt6360_charger_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+};
+
+static int mt6360_get_chrdet_ext_stat(struct mt6360_chg_info *mci,
+					     bool *pwr_rdy)
+{
+	int ret;
+	unsigned int regval;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_FOD_STAT, &regval);
+	if (ret < 0)
+		return ret;
+	*pwr_rdy = (regval & MT6360_CHRDET_EXT_MASK) ? true : false;
+	return 0;
+}
+
+static int mt6360_charger_get_online(struct mt6360_chg_info *mci,
+				     union power_supply_propval *val)
+{
+	int ret;
+	bool pwr_rdy;
+
+	ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
+	if (ret < 0)
+		return ret;
+	val->intval = pwr_rdy ? true : false;
+	return 0;
+}
+
+static int mt6360_charger_get_status(struct mt6360_chg_info *mci,
+				     union power_supply_propval *val)
+{
+	int status, ret;
+	unsigned int regval;
+	bool pwr_rdy;
+
+	ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
+	if (ret < 0)
+		return ret;
+	if (!pwr_rdy) {
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+		goto out;
+	}
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, &regval);
+	if (ret < 0)
+		return ret;
+	regval &= MT6360_CHG_STAT_MASK;
+	regval >>= MT6360_CHG_STAT_SHFT;
+	switch (regval) {
+	case 0x0:
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case 0x1:
+		status = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case 0x2:
+		status = POWER_SUPPLY_STATUS_FULL;
+		break;
+	default:
+		ret = -EIO;
+	}
+out:
+	if (!ret)
+		val->intval = status;
+	return ret;
+}
+
+static int mt6360_charger_get_charge_type(struct mt6360_chg_info *mci,
+					  union power_supply_propval *val)
+{
+	int type, ret;
+	unsigned int regval;
+	u8 chg_stat;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_STAT, &regval);
+	if (ret < 0)
+		return ret;
+
+	chg_stat = (regval & MT6360_CHG_STAT_MASK) >> MT6360_CHG_STAT_SHFT;
+	switch (chg_stat) {
+	case 0x01: /* Charge in Progress */
+		if (regval & MT6360_VBAT_LVL_MASK)
+			type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else
+			type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case 0x00: /* Not Charging */
+	case 0x02: /* Charge Done */
+	case 0x03: /* Charge Fault */
+	default:
+		type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	val->intval = type;
+	return 0;
+}
+
+static int mt6360_charger_get_ichg(struct mt6360_chg_info *mci,
+				   union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL7, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_ICHG_MASK) >> MT6360_ICHG_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_ICHG], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_get_max_ichg(struct mt6360_chg_info *mci,
+				       union power_supply_propval *val)
+{
+	val->intval = MT6360_ICHG_MAX;
+	return 0;
+}
+
+static int mt6360_charger_get_cv(struct mt6360_chg_info *mci,
+				 union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL4, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_VOREG_MASK) >> MT6360_VOREG_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_VOREG], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_get_max_cv(struct mt6360_chg_info *mci,
+				     union power_supply_propval *val)
+{
+	val->intval = MT6360_VOREG_MAX;
+	return 0;
+}
+
+static int mt6360_charger_get_aicr(struct mt6360_chg_info *mci,
+				   union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL3, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_IAICR_MASK) >> MT6360_IAICR_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_AICR], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_get_mivr(struct mt6360_chg_info *mci,
+				   union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL6, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_VMIVR_MASK) >> MT6360_VMIVR_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_VMIVR], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_get_iprechg(struct mt6360_chg_info *mci,
+				      union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL8, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_IPREC_MASK) >> MT6360_IPREC_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_IPREC], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_get_ieoc(struct mt6360_chg_info *mci,
+				   union power_supply_propval *val)
+{
+	int ret;
+	u32 sel, value;
+
+	ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL9, &sel);
+	if (ret < 0)
+		return ret;
+	sel = (sel & MT6360_IEOC_MASK) >> MT6360_IEOC_SHFT;
+	ret = linear_range_get_value(&mt6360_chg_range[MT6360_RANGE_IEOC], sel, &value);
+	if (!ret)
+		val->intval = value;
+	return ret;
+}
+
+static int mt6360_charger_set_online(struct mt6360_chg_info *mci,
+				     const union power_supply_propval *val)
+{
+	u8 force_sleep = val->intval ? 0 : 1;
+
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL1,
+				  MT6360_FSLP_MASK,
+				  force_sleep << MT6360_FSLP_SHFT);
+}
+
+static int mt6360_charger_set_ichg(struct mt6360_chg_info *mci,
+				   const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_ICHG], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL7,
+				  MT6360_ICHG_MASK,
+				  sel << MT6360_ICHG_SHFT);
+}
+
+static int mt6360_charger_set_cv(struct mt6360_chg_info *mci,
+				 const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_VOREG], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL4,
+				  MT6360_VOREG_MASK,
+				  sel << MT6360_VOREG_SHFT);
+}
+
+static int mt6360_charger_set_aicr(struct mt6360_chg_info *mci,
+				   const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_AICR], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL3,
+				  MT6360_IAICR_MASK,
+				  sel << MT6360_IAICR_SHFT);
+}
+
+static int mt6360_charger_set_mivr(struct mt6360_chg_info *mci,
+				   const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_VMIVR], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL3,
+				  MT6360_VMIVR_MASK,
+				  sel << MT6360_VMIVR_SHFT);
+}
+
+static int mt6360_charger_set_iprechg(struct mt6360_chg_info *mci,
+				      const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_IPREC], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL8,
+				  MT6360_IPREC_MASK,
+				  sel << MT6360_IPREC_SHFT);
+}
+
+static int mt6360_charger_set_ieoc(struct mt6360_chg_info *mci,
+				   const union power_supply_propval *val)
+{
+	u32 sel;
+
+	linear_range_get_selector_within(&mt6360_chg_range[MT6360_RANGE_IEOC], val->intval, &sel);
+	return regmap_update_bits(mci->regmap,
+				  MT6360_PMU_CHG_CTRL9,
+				  MT6360_IEOC_MASK,
+				  sel << MT6360_IEOC_SHFT);
+}
+
+static int mt6360_charger_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct mt6360_chg_info *mci = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = mt6360_charger_get_online(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = mt6360_charger_get_status(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = mt6360_charger_get_charge_type(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = mt6360_charger_get_ichg(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		ret = mt6360_charger_get_max_ichg(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = mt6360_charger_get_cv(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = mt6360_charger_get_max_cv(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = mt6360_charger_get_aicr(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = mt6360_charger_get_mivr(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = mt6360_charger_get_iprechg(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = mt6360_charger_get_ieoc(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = mci->psy_usb_type;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+	return ret;
+}
+
+static int mt6360_charger_set_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct mt6360_chg_info *mci = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = mt6360_charger_set_online(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = mt6360_charger_set_ichg(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = mt6360_charger_set_cv(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = mt6360_charger_set_aicr(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		ret = mt6360_charger_set_mivr(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		ret = mt6360_charger_set_iprechg(mci, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		ret = mt6360_charger_set_ieoc(mci, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static int mt6360_charger_property_is_writeable(struct power_supply *psy,
+					       enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property mt6360_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_USB_TYPE,
+};
+
+static const struct power_supply_desc mt6360_charger_desc = {
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= mt6360_charger_properties,
+	.num_properties		= ARRAY_SIZE(mt6360_charger_properties),
+	.get_property		= mt6360_charger_get_property,
+	.set_property		= mt6360_charger_set_property,
+	.property_is_writeable	= mt6360_charger_property_is_writeable,
+	.usb_types		= mt6360_charger_usb_types,
+	.num_usb_types		= ARRAY_SIZE(mt6360_charger_usb_types),
+};
+
+static const struct regulator_ops mt6360_chg_otg_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_desc mt6360_otg_rdesc = {
+	.of_match = "usb-otg-vbus",
+	.name = "usb-otg-vbus",
+	.ops = &mt6360_chg_otg_ops,
+	.owner = THIS_MODULE,
+	.type = REGULATOR_VOLTAGE,
+	.min_uV = 4425000,
+	.uV_step = 25000,
+	.n_voltages = 57,
+	.vsel_reg = MT6360_PMU_CHG_CTRL5,
+	.vsel_mask = MT6360_VOBST_MASK,
+	.enable_reg = MT6360_PMU_CHG_CTRL1,
+	.enable_mask = MT6360_OPA_MODE_MASK,
+};
+
+static irqreturn_t mt6360_pmu_attach_i_handler(int irq, void *data)
+{
+	struct mt6360_chg_info *mci = data;
+	int ret;
+	unsigned int usb_status;
+	int last_usb_type;
+
+	mutex_lock(&mci->chgdet_lock);
+	if (!mci->bc12_en) {
+		dev_warn(mci->dev, "Received attach interrupt, bc12 disabled, ignore irq\n");
+		goto out;
+	}
+	last_usb_type = mci->psy_usb_type;
+	/* Plug in */
+	ret = regmap_read(mci->regmap, MT6360_PMU_USB_STATUS1, &usb_status);
+	if (ret < 0)
+		goto out;
+	usb_status &= MT6360_USB_STATUS_MASK;
+	usb_status >>= MT6360_USB_STATUS_SHFT;
+	switch (usb_status) {
+	case MT6360_CHG_TYPE_NOVBUS:
+		dev_dbg(mci->dev, "Received attach interrupt, no vbus\n");
+		goto out;
+	case MT6360_CHG_TYPE_UNDER_GOING:
+		dev_dbg(mci->dev, "Received attach interrupt, under going...\n");
+		goto out;
+	case MT6360_CHG_TYPE_SDP:
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case MT6360_CHG_TYPE_SDPNSTD:
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case MT6360_CHG_TYPE_CDP:
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case MT6360_CHG_TYPE_DCP:
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	case MT6360_CHG_TYPE_DISABLE_BC12:
+		dev_dbg(mci->dev, "Received attach interrupt, bc12 detect not enable\n");
+		goto out;
+	default:
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		dev_dbg(mci->dev, "Received attach interrupt, reserved address\n");
+		goto out;
+	}
+
+	dev_dbg(mci->dev, "Received attach interrupt, chg_type = %d\n", mci->psy_usb_type);
+	if (last_usb_type != mci->psy_usb_type)
+		power_supply_changed(mci->psy);
+out:
+	mutex_unlock(&mci->chgdet_lock);
+	return IRQ_HANDLED;
+}
+
+static void mt6360_handle_chrdet_ext_evt(struct mt6360_chg_info *mci)
+{
+	int ret;
+	bool pwr_rdy;
+
+	mutex_lock(&mci->chgdet_lock);
+	ret = mt6360_get_chrdet_ext_stat(mci, &pwr_rdy);
+	if (ret < 0)
+		goto out;
+	if (mci->pwr_rdy == pwr_rdy) {
+		dev_dbg(mci->dev, "Received vbus interrupt, pwr_rdy is same(%d)\n", pwr_rdy);
+		goto out;
+	}
+	mci->pwr_rdy = pwr_rdy;
+	dev_dbg(mci->dev, "Received vbus interrupt, pwr_rdy = %d\n", pwr_rdy);
+	if (!pwr_rdy) {
+		mci->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		power_supply_changed(mci->psy);
+
+	}
+	ret = regmap_update_bits(mci->regmap,
+				 MT6360_PMU_DEVICE_TYPE,
+				 MT6360_USBCHGEN_MASK,
+				 pwr_rdy ? MT6360_USBCHGEN_MASK : 0);
+	if (ret < 0)
+		goto out;
+	mci->bc12_en = pwr_rdy;
+out:
+	mutex_unlock(&mci->chgdet_lock);
+}
+
+static void mt6360_chrdet_work(struct work_struct *work)
+{
+	struct mt6360_chg_info *mci = (struct mt6360_chg_info *)container_of(
+				     work, struct mt6360_chg_info, chrdet_work);
+
+	mt6360_handle_chrdet_ext_evt(mci);
+}
+
+static irqreturn_t mt6360_pmu_chrdet_ext_evt_handler(int irq, void *data)
+{
+	struct mt6360_chg_info *mci = data;
+
+	mt6360_handle_chrdet_ext_evt(mci);
+	return IRQ_HANDLED;
+}
+
+static int mt6360_chg_irq_register(struct platform_device *pdev)
+{
+	const struct {
+		const char *name;
+		irq_handler_t handler;
+	} irq_descs[] = {
+		{ "attach_i", mt6360_pmu_attach_i_handler },
+		{ "chrdet_ext_evt", mt6360_pmu_chrdet_ext_evt_handler }
+	};
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(irq_descs); i++) {
+		ret = platform_get_irq_byname(pdev, irq_descs[i].name);
+		if (ret < 0)
+			return ret;
+
+		ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
+						irq_descs[i].handler,
+						IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+						irq_descs[i].name,
+						platform_get_drvdata(pdev));
+		if (ret < 0)
+			return dev_err_probe(&pdev->dev, ret, "Failed to request %s irq\n",
+					     irq_descs[i].name);
+	}
+
+	return 0;
+}
+
+static u32 mt6360_vinovp_trans_to_sel(u32 val)
+{
+	u32 vinovp_tbl[] = { 5500000, 6500000, 11000000, 14500000 };
+	int i;
+
+	/* Select the smaller and equal supported value */
+	for (i = 0; i < ARRAY_SIZE(vinovp_tbl)-1; i++) {
+		if (val < vinovp_tbl[i+1])
+			break;
+	}
+	return i;
+}
+
+static int mt6360_chg_init_setting(struct mt6360_chg_info *mci)
+{
+	int ret;
+	u32 sel;
+
+	sel = mt6360_vinovp_trans_to_sel(mci->vinovp);
+	ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL19,
+				  MT6360_VINOVP_MASK, sel << MT6360_VINOVP_SHFT);
+	if (ret)
+		return dev_err_probe(mci->dev, ret, "%s: Failed to apply vinovp\n", __func__);
+	ret = regmap_update_bits(mci->regmap, MT6360_PMU_DEVICE_TYPE,
+				 MT6360_USBCHGEN_MASK, 0);
+	if (ret)
+		return dev_err_probe(mci->dev, ret, "%s: Failed to disable bc12\n", __func__);
+	ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL2,
+				 MT6360_IINLMTSEL_MASK,
+				 MT6360_IINLMTSEL_AICR <<
+					MT6360_IINLMTSEL_SHFT);
+	if (ret)
+		return dev_err_probe(mci->dev, ret,
+				     "%s: Failed to switch iinlmtsel to aicr\n", __func__);
+	usleep_range(5000, 6000);
+	ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL3,
+				 MT6360_ILIM_EN_MASK, 0);
+	if (ret)
+		return dev_err_probe(mci->dev, ret,
+				     "%s: Failed to disable ilim\n", __func__);
+	ret = regmap_update_bits(mci->regmap, MT6360_PMU_CHG_CTRL10,
+				 MT6360_OTG_OC_MASK, MT6360_OTG_OC_MASK);
+	if (ret)
+		return dev_err_probe(mci->dev, ret,
+				     "%s: Failed to config otg oc to 3A\n", __func__);
+	return 0;
+}
+
+static int mt6360_charger_probe(struct platform_device *pdev)
+{
+	struct mt6360_chg_info *mci;
+	struct power_supply_config charger_cfg = {};
+	struct regulator_config config = { };
+	int ret;
+
+	mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL);
+	if (!mci)
+		return -ENOMEM;
+
+	mci->dev = &pdev->dev;
+	mci->vinovp = 6500000;
+	mutex_init(&mci->chgdet_lock);
+	platform_set_drvdata(pdev, mci);
+	ret = devm_work_autocancel(&pdev->dev, &mci->chrdet_work, mt6360_chrdet_work);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to set delayed work\n");
+
+	ret = device_property_read_u32(&pdev->dev, "richtek,vinovp-microvolt", &mci->vinovp);
+	if (ret)
+		dev_warn(&pdev->dev, "Failed to parse vinovp in DT, keep default 6.5v\n");
+
+	mci->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!mci->regmap)
+		return dev_err_probe(&pdev->dev, -ENODEV, "Failed to get parent regmap\n");
+
+	ret = mt6360_chg_init_setting(mci);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to initial setting\n");
+
+	memcpy(&mci->psy_desc, &mt6360_charger_desc, sizeof(mci->psy_desc));
+	mci->psy_desc.name = dev_name(&pdev->dev);
+	charger_cfg.drv_data = mci;
+	charger_cfg.of_node = pdev->dev.of_node;
+	mci->psy = devm_power_supply_register(&pdev->dev,
+					      &mci->psy_desc, &charger_cfg);
+	if (IS_ERR(mci->psy))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mci->psy),
+				     "Failed to register power supply dev\n");
+
+
+	ret = mt6360_chg_irq_register(pdev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "Failed to register irqs\n");
+
+	config.dev = &pdev->dev;
+	config.regmap = mci->regmap;
+	mci->otg_rdev = devm_regulator_register(&pdev->dev, &mt6360_otg_rdesc,
+						&config);
+	if (IS_ERR(mci->otg_rdev))
+		return PTR_ERR(mci->otg_rdev);
+
+	schedule_work(&mci->chrdet_work);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused mt6360_charger_of_id[] = {
+	{ .compatible = "mediatek,mt6360-chg", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6360_charger_of_id);
+
+static const struct platform_device_id mt6360_charger_id[] = {
+	{ "mt6360-chg", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, mt6360_charger_id);
+
+static struct platform_driver mt6360_charger_driver = {
+	.driver = {
+		.name = "mt6360-chg",
+		.of_match_table = of_match_ptr(mt6360_charger_of_id),
+	},
+	.probe = mt6360_charger_probe,
+	.id_table = mt6360_charger_id,
+};
+module_platform_driver(mt6360_charger_driver);
+
+MODULE_AUTHOR("Gene Chen <gene_chen@richtek.com>");
+MODULE_DESCRIPTION("MT6360 Charger Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/mt6370-charger.c b/drivers/power/supply/mt6370-charger.c
new file mode 100644
index 000000000..a9641bd3d
--- /dev/null
+++ b/drivers/power/supply/mt6370-charger.c
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiaEn Wu <chiaen_wu@richtek.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/devm-helpers.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/workqueue.h>
+
+#define MT6370_REG_CHG_CTRL1		0x111
+#define MT6370_REG_CHG_CTRL2		0x112
+#define MT6370_REG_CHG_CTRL3		0x113
+#define MT6370_REG_CHG_CTRL4		0x114
+#define MT6370_REG_CHG_CTRL5		0x115
+#define MT6370_REG_CHG_CTRL6		0x116
+#define MT6370_REG_CHG_CTRL7		0x117
+#define MT6370_REG_CHG_CTRL8		0x118
+#define MT6370_REG_CHG_CTRL9		0x119
+#define MT6370_REG_CHG_CTRL10		0x11A
+#define MT6370_REG_DEVICE_TYPE		0x122
+#define MT6370_REG_USB_STATUS1		0x127
+#define MT6370_REG_CHG_STAT		0x14A
+#define MT6370_REG_FLED_EN		0x17E
+#define MT6370_REG_CHG_STAT1		0X1D0
+#define MT6370_REG_OVPCTRL_STAT		0x1D8
+
+#define MT6370_VOBST_MASK		GENMASK(7, 2)
+#define MT6370_OTG_PIN_EN_MASK		BIT(1)
+#define MT6370_OPA_MODE_MASK		BIT(0)
+#define MT6370_OTG_OC_MASK		GENMASK(2, 0)
+
+#define MT6370_MIVR_IBUS_TH_100_mA	100000
+#define MT6370_ADC_CHAN_IBUS		5
+#define MT6370_ADC_CHAN_MAX		9
+
+enum mt6370_chg_reg_field {
+	/* MT6370_REG_CHG_CTRL2 */
+	F_IINLMTSEL, F_CFO_EN, F_CHG_EN,
+	/* MT6370_REG_CHG_CTRL3 */
+	F_IAICR, F_AICR_EN, F_ILIM_EN,
+	/* MT6370_REG_CHG_CTRL4 */
+	F_VOREG,
+	/* MT6370_REG_CHG_CTRL6 */
+	F_VMIVR,
+	/* MT6370_REG_CHG_CTRL7 */
+	F_ICHG,
+	/* MT6370_REG_CHG_CTRL8 */
+	F_IPREC,
+	/* MT6370_REG_CHG_CTRL9 */
+	F_IEOC,
+	/* MT6370_REG_DEVICE_TYPE */
+	F_USBCHGEN,
+	/* MT6370_REG_USB_STATUS1 */
+	F_USB_STAT, F_CHGDET,
+	/* MT6370_REG_CHG_STAT */
+	F_CHG_STAT, F_BOOST_STAT, F_VBAT_LVL,
+	/* MT6370_REG_FLED_EN */
+	F_FL_STROBE,
+	/* MT6370_REG_CHG_STAT1 */
+	F_CHG_MIVR_STAT,
+	/* MT6370_REG_OVPCTRL_STAT */
+	F_UVP_D_STAT,
+	F_MAX
+};
+
+enum mt6370_irq {
+	MT6370_IRQ_ATTACH_I = 0,
+	MT6370_IRQ_UVP_D_EVT,
+	MT6370_IRQ_MIVR,
+	MT6370_IRQ_MAX
+};
+
+struct mt6370_priv {
+	struct device *dev;
+	struct iio_channel *iio_adcs;
+	struct mutex attach_lock;
+	struct power_supply *psy;
+	struct regmap *regmap;
+	struct regmap_field *rmap_fields[F_MAX];
+	struct regulator_dev *rdev;
+	struct workqueue_struct *wq;
+	struct work_struct bc12_work;
+	struct delayed_work mivr_dwork;
+	unsigned int irq_nums[MT6370_IRQ_MAX];
+	int attach;
+	int psy_usb_type;
+	bool pwr_rdy;
+};
+
+enum mt6370_usb_status {
+	MT6370_USB_STAT_NO_VBUS = 0,
+	MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING,
+	MT6370_USB_STAT_SDP,
+	MT6370_USB_STAT_SDP_NSTD,
+	MT6370_USB_STAT_DCP,
+	MT6370_USB_STAT_CDP,
+	MT6370_USB_STAT_MAX
+};
+
+struct mt6370_chg_field {
+	const char *name;
+	const struct linear_range *range;
+	struct reg_field field;
+};
+
+enum {
+	MT6370_RANGE_F_IAICR = 0,
+	MT6370_RANGE_F_VOREG,
+	MT6370_RANGE_F_VMIVR,
+	MT6370_RANGE_F_ICHG,
+	MT6370_RANGE_F_IPREC,
+	MT6370_RANGE_F_IEOC,
+	MT6370_RANGE_F_MAX
+};
+
+static const struct linear_range mt6370_chg_ranges[MT6370_RANGE_F_MAX] = {
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_IAICR, 100000, 0x0, 0x3F, 50000),
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_VOREG, 3900000, 0x0, 0x51, 10000),
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_VMIVR, 3900000, 0x0, 0x5F, 100000),
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_ICHG, 900000, 0x08, 0x31, 100000),
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_IPREC, 100000, 0x0, 0x0F, 50000),
+	LINEAR_RANGE_IDX(MT6370_RANGE_F_IEOC, 100000, 0x0, 0x0F, 50000),
+};
+
+#define MT6370_CHG_FIELD(_fd, _reg, _lsb, _msb)				\
+[_fd] = {								\
+	.name = #_fd,							\
+	.range = NULL,							\
+	.field = REG_FIELD(_reg, _lsb, _msb),				\
+}
+
+#define MT6370_CHG_FIELD_RANGE(_fd, _reg, _lsb, _msb)			\
+[_fd] = {								\
+	.name = #_fd,							\
+	.range = &mt6370_chg_ranges[MT6370_RANGE_##_fd],		\
+	.field = REG_FIELD(_reg, _lsb, _msb),				\
+}
+
+static const struct mt6370_chg_field mt6370_chg_fields[F_MAX] = {
+	MT6370_CHG_FIELD(F_IINLMTSEL, MT6370_REG_CHG_CTRL2, 2, 3),
+	MT6370_CHG_FIELD(F_CFO_EN, MT6370_REG_CHG_CTRL2, 1, 1),
+	MT6370_CHG_FIELD(F_CHG_EN, MT6370_REG_CHG_CTRL2, 0, 0),
+	MT6370_CHG_FIELD_RANGE(F_IAICR, MT6370_REG_CHG_CTRL3, 2, 7),
+	MT6370_CHG_FIELD(F_AICR_EN, MT6370_REG_CHG_CTRL3, 1, 1),
+	MT6370_CHG_FIELD(F_ILIM_EN, MT6370_REG_CHG_CTRL3, 0, 0),
+	MT6370_CHG_FIELD_RANGE(F_VOREG, MT6370_REG_CHG_CTRL4, 1, 7),
+	MT6370_CHG_FIELD_RANGE(F_VMIVR, MT6370_REG_CHG_CTRL6, 1, 7),
+	MT6370_CHG_FIELD_RANGE(F_ICHG, MT6370_REG_CHG_CTRL7, 2, 7),
+	MT6370_CHG_FIELD_RANGE(F_IPREC, MT6370_REG_CHG_CTRL8, 0, 3),
+	MT6370_CHG_FIELD_RANGE(F_IEOC, MT6370_REG_CHG_CTRL9, 4, 7),
+	MT6370_CHG_FIELD(F_USBCHGEN, MT6370_REG_DEVICE_TYPE, 7, 7),
+	MT6370_CHG_FIELD(F_USB_STAT, MT6370_REG_USB_STATUS1, 4, 6),
+	MT6370_CHG_FIELD(F_CHGDET, MT6370_REG_USB_STATUS1, 3, 3),
+	MT6370_CHG_FIELD(F_CHG_STAT, MT6370_REG_CHG_STAT, 6, 7),
+	MT6370_CHG_FIELD(F_BOOST_STAT, MT6370_REG_CHG_STAT, 3, 3),
+	MT6370_CHG_FIELD(F_VBAT_LVL, MT6370_REG_CHG_STAT, 5, 5),
+	MT6370_CHG_FIELD(F_FL_STROBE, MT6370_REG_FLED_EN, 2, 2),
+	MT6370_CHG_FIELD(F_CHG_MIVR_STAT, MT6370_REG_CHG_STAT1, 6, 6),
+	MT6370_CHG_FIELD(F_UVP_D_STAT, MT6370_REG_OVPCTRL_STAT, 4, 4),
+};
+
+static inline int mt6370_chg_field_get(struct mt6370_priv *priv,
+				       enum mt6370_chg_reg_field fd,
+				       unsigned int *val)
+{
+	int ret;
+	unsigned int reg_val;
+
+	ret = regmap_field_read(priv->rmap_fields[fd], &reg_val);
+	if (ret)
+		return ret;
+
+	if (mt6370_chg_fields[fd].range)
+		return linear_range_get_value(mt6370_chg_fields[fd].range,
+					       reg_val, val);
+
+	*val = reg_val;
+	return 0;
+}
+
+static inline int mt6370_chg_field_set(struct mt6370_priv *priv,
+				       enum mt6370_chg_reg_field fd,
+				       unsigned int val)
+{
+	int ret;
+	bool f;
+	const struct linear_range *r;
+
+	if (mt6370_chg_fields[fd].range) {
+		r = mt6370_chg_fields[fd].range;
+
+		if (fd == F_VMIVR) {
+			ret = linear_range_get_selector_high(r, val, &val, &f);
+			if (ret)
+				val = r->max_sel;
+		} else {
+			linear_range_get_selector_within(r, val, &val);
+		}
+	}
+
+	return regmap_field_write(priv->rmap_fields[fd], val);
+}
+
+enum {
+	MT6370_CHG_STAT_READY = 0,
+	MT6370_CHG_STAT_CHARGE_IN_PROGRESS,
+	MT6370_CHG_STAT_DONE,
+	MT6370_CHG_STAT_FAULT,
+	MT6370_CHG_STAT_MAX
+};
+
+enum {
+	MT6370_ATTACH_STAT_DETACH = 0,
+	MT6370_ATTACH_STAT_ATTACH_WAIT_FOR_BC12,
+	MT6370_ATTACH_STAT_ATTACH_BC12_DONE,
+	MT6370_ATTACH_STAT_ATTACH_MAX
+};
+
+static int mt6370_chg_otg_of_parse_cb(struct device_node *of,
+				      const struct regulator_desc *rdesc,
+				      struct regulator_config *rcfg)
+{
+	struct mt6370_priv *priv = rcfg->driver_data;
+
+	rcfg->ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(of),
+						 "enable", 0, GPIOD_OUT_LOW |
+						 GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+						 rdesc->name);
+	if (IS_ERR(rcfg->ena_gpiod)) {
+		rcfg->ena_gpiod = NULL;
+		return 0;
+	}
+
+	return regmap_update_bits(priv->regmap, MT6370_REG_CHG_CTRL1,
+				  MT6370_OTG_PIN_EN_MASK,
+				  MT6370_OTG_PIN_EN_MASK);
+}
+
+static void mt6370_chg_bc12_work_func(struct work_struct *work)
+{
+	struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
+						bc12_work);
+	int ret;
+	bool rpt_psy = false;
+	unsigned int attach, usb_stat;
+
+	mutex_lock(&priv->attach_lock);
+	attach = priv->attach;
+
+	switch (attach) {
+	case MT6370_ATTACH_STAT_DETACH:
+		usb_stat = 0;
+		break;
+	case MT6370_ATTACH_STAT_ATTACH_WAIT_FOR_BC12:
+		ret = mt6370_chg_field_set(priv, F_USBCHGEN, attach);
+		if (ret)
+			dev_err(priv->dev, "Failed to enable USB CHG EN\n");
+		goto bc12_work_func_out;
+	case MT6370_ATTACH_STAT_ATTACH_BC12_DONE:
+		ret = mt6370_chg_field_get(priv, F_USB_STAT, &usb_stat);
+		if (ret) {
+			dev_err(priv->dev, "Failed to get USB status\n");
+			goto bc12_work_func_out;
+		}
+		break;
+	default:
+		dev_err(priv->dev, "Invalid attach state\n");
+		goto bc12_work_func_out;
+	}
+
+	rpt_psy = true;
+
+	switch (usb_stat) {
+	case MT6370_USB_STAT_SDP:
+	case MT6370_USB_STAT_SDP_NSTD:
+		priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case MT6370_USB_STAT_DCP:
+		priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	case MT6370_USB_STAT_CDP:
+		priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case MT6370_USB_STAT_NO_VBUS:
+	case MT6370_USB_STAT_VBUS_FLOW_IS_UNDER_GOING:
+	default:
+		priv->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		break;
+	}
+
+bc12_work_func_out:
+	mutex_unlock(&priv->attach_lock);
+
+	if (rpt_psy)
+		power_supply_changed(priv->psy);
+}
+
+static int mt6370_chg_toggle_cfo(struct mt6370_priv *priv)
+{
+	int ret;
+	unsigned int fl_strobe;
+
+	/* check if flash led in strobe mode */
+	ret = mt6370_chg_field_get(priv, F_FL_STROBE, &fl_strobe);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get FL_STROBE_EN\n");
+		return ret;
+	}
+
+	if (fl_strobe) {
+		dev_err(priv->dev, "Flash led is still in strobe mode\n");
+		return -EINVAL;
+	}
+
+	/* cfo off */
+	ret = mt6370_chg_field_set(priv, F_CFO_EN, 0);
+	if (ret) {
+		dev_err(priv->dev, "Failed to disable CFO_EN\n");
+		return ret;
+	}
+
+	/* cfo on */
+	ret = mt6370_chg_field_set(priv, F_CFO_EN, 1);
+	if (ret)
+		dev_err(priv->dev, "Failed to enable CFO_EN\n");
+
+	return ret;
+}
+
+static int mt6370_chg_read_adc_chan(struct mt6370_priv *priv, unsigned int chan,
+				    int *val)
+{
+	int ret;
+
+	if (chan >= MT6370_ADC_CHAN_MAX)
+		return -EINVAL;
+
+	ret = iio_read_channel_processed(&priv->iio_adcs[chan], val);
+	if (ret)
+		dev_err(priv->dev, "Failed to read ADC\n");
+
+	return ret;
+}
+
+static void mt6370_chg_mivr_dwork_func(struct work_struct *work)
+{
+	struct mt6370_priv *priv = container_of(work, struct mt6370_priv,
+						mivr_dwork.work);
+	int ret;
+	unsigned int mivr_stat, ibus;
+
+	ret = mt6370_chg_field_get(priv, F_CHG_MIVR_STAT, &mivr_stat);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get mivr state\n");
+		goto mivr_handler_out;
+	}
+
+	if (!mivr_stat)
+		goto mivr_handler_out;
+
+	ret = mt6370_chg_read_adc_chan(priv, MT6370_ADC_CHAN_IBUS, &ibus);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get ibus\n");
+		goto mivr_handler_out;
+	}
+
+	if (ibus < MT6370_MIVR_IBUS_TH_100_mA) {
+		ret = mt6370_chg_toggle_cfo(priv);
+		if (ret)
+			dev_err(priv->dev, "Failed to toggle cfo\n");
+	}
+
+mivr_handler_out:
+	enable_irq(priv->irq_nums[MT6370_IRQ_MIVR]);
+	pm_relax(priv->dev);
+}
+
+static void mt6370_chg_pwr_rdy_check(struct mt6370_priv *priv)
+{
+	int ret;
+	unsigned int opposite_pwr_rdy, otg_en;
+	union power_supply_propval val;
+
+	/* Check in OTG mode or not */
+	ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get OTG state\n");
+		return;
+	}
+
+	if (otg_en)
+		return;
+
+	ret = mt6370_chg_field_get(priv, F_UVP_D_STAT, &opposite_pwr_rdy);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get opposite power ready state\n");
+		return;
+	}
+
+	val.intval = opposite_pwr_rdy ?
+		     MT6370_ATTACH_STAT_DETACH :
+		     MT6370_ATTACH_STAT_ATTACH_WAIT_FOR_BC12;
+
+	ret = power_supply_set_property(priv->psy, POWER_SUPPLY_PROP_ONLINE,
+					&val);
+	if (ret)
+		dev_err(priv->dev, "Failed to start attach/detach flow\n");
+}
+
+static int mt6370_chg_get_online(struct mt6370_priv *priv,
+				 union power_supply_propval *val)
+{
+	mutex_lock(&priv->attach_lock);
+	val->intval = !!priv->attach;
+	mutex_unlock(&priv->attach_lock);
+
+	return 0;
+}
+
+static int mt6370_chg_get_status(struct mt6370_priv *priv,
+				 union power_supply_propval *val)
+{
+	int ret;
+	unsigned int chg_stat;
+	union power_supply_propval online;
+
+	ret = power_supply_get_property(priv->psy, POWER_SUPPLY_PROP_ONLINE,
+					&online);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get online status\n");
+		return ret;
+	}
+
+	if (!online.intval) {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
+	if (ret)
+		return ret;
+
+	switch (chg_stat) {
+	case MT6370_CHG_STAT_READY:
+	case MT6370_CHG_STAT_FAULT:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		return ret;
+	case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		return ret;
+	case MT6370_CHG_STAT_DONE:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		return ret;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		return ret;
+	}
+}
+
+static int mt6370_chg_get_charge_type(struct mt6370_priv *priv,
+				      union power_supply_propval *val)
+{
+	int type, ret;
+	unsigned int chg_stat, vbat_lvl;
+
+	ret = mt6370_chg_field_get(priv, F_CHG_STAT, &chg_stat);
+	if (ret)
+		return ret;
+
+	ret = mt6370_chg_field_get(priv, F_VBAT_LVL, &vbat_lvl);
+	if (ret)
+		return ret;
+
+	switch (chg_stat) {
+	case MT6370_CHG_STAT_CHARGE_IN_PROGRESS:
+		if (vbat_lvl)
+			type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else
+			type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case MT6370_CHG_STAT_READY:
+	case MT6370_CHG_STAT_DONE:
+	case MT6370_CHG_STAT_FAULT:
+	default:
+		type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	val->intval = type;
+
+	return 0;
+}
+
+static int mt6370_chg_set_online(struct mt6370_priv *priv,
+				 const union power_supply_propval *val)
+{
+	bool pwr_rdy = !!val->intval;
+
+	mutex_lock(&priv->attach_lock);
+	if (pwr_rdy == !!priv->attach) {
+		dev_err(priv->dev, "pwr_rdy is same(%d)\n", pwr_rdy);
+		mutex_unlock(&priv->attach_lock);
+		return 0;
+	}
+
+	priv->attach = pwr_rdy;
+	mutex_unlock(&priv->attach_lock);
+
+	if (!queue_work(priv->wq, &priv->bc12_work))
+		dev_err(priv->dev, "bc12 work has already queued\n");
+
+	return 0;
+}
+
+static int mt6370_chg_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct mt6370_priv *priv = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		return mt6370_chg_get_online(priv, val);
+	case POWER_SUPPLY_PROP_STATUS:
+		return mt6370_chg_get_status(priv, val);
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return mt6370_chg_get_charge_type(priv, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return mt6370_chg_field_get(priv, F_ICHG, &val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = linear_range_get_max_value(&mt6370_chg_ranges[MT6370_RANGE_F_ICHG]);
+		return 0;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return mt6370_chg_field_get(priv, F_VOREG, &val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = linear_range_get_max_value(&mt6370_chg_ranges[MT6370_RANGE_F_VOREG]);
+		return 0;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return mt6370_chg_field_get(priv, F_IAICR, &val->intval);
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return mt6370_chg_field_get(priv, F_VMIVR, &val->intval);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return mt6370_chg_field_get(priv, F_IPREC, &val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return mt6370_chg_field_get(priv, F_IEOC, &val->intval);
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = priv->psy_usb_type;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mt6370_chg_set_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   const union power_supply_propval *val)
+{
+	struct mt6370_priv *priv = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		return mt6370_chg_set_online(priv, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return mt6370_chg_field_set(priv, F_ICHG, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return mt6370_chg_field_set(priv, F_VOREG, val->intval);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return mt6370_chg_field_set(priv, F_IAICR, val->intval);
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+		return mt6370_chg_field_set(priv, F_VMIVR, val->intval);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return mt6370_chg_field_set(priv, F_IPREC, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return mt6370_chg_field_set(priv, F_IEOC, val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mt6370_chg_property_is_writeable(struct power_supply *psy,
+					    enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property mt6370_chg_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_USB_TYPE,
+};
+
+static enum power_supply_usb_type mt6370_chg_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+};
+
+static const struct power_supply_desc mt6370_chg_psy_desc = {
+	.name = "mt6370-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = mt6370_chg_properties,
+	.num_properties = ARRAY_SIZE(mt6370_chg_properties),
+	.get_property = mt6370_chg_get_property,
+	.set_property = mt6370_chg_set_property,
+	.property_is_writeable = mt6370_chg_property_is_writeable,
+	.usb_types = mt6370_chg_usb_types,
+	.num_usb_types = ARRAY_SIZE(mt6370_chg_usb_types),
+};
+
+static const struct regulator_ops mt6370_chg_otg_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+};
+
+static const u32 mt6370_chg_otg_oc_ma[] = {
+	500000, 700000, 1100000, 1300000, 1800000, 2100000, 2400000,
+};
+
+static const struct regulator_desc mt6370_chg_otg_rdesc = {
+	.of_match = "usb-otg-vbus-regulator",
+	.of_parse_cb = mt6370_chg_otg_of_parse_cb,
+	.name = "mt6370-usb-otg-vbus",
+	.ops = &mt6370_chg_otg_ops,
+	.owner = THIS_MODULE,
+	.type = REGULATOR_VOLTAGE,
+	.min_uV = 4425000,
+	.uV_step = 25000,
+	.n_voltages = 57,
+	.vsel_reg = MT6370_REG_CHG_CTRL5,
+	.vsel_mask = MT6370_VOBST_MASK,
+	.enable_reg = MT6370_REG_CHG_CTRL1,
+	.enable_mask = MT6370_OPA_MODE_MASK,
+	.curr_table = mt6370_chg_otg_oc_ma,
+	.n_current_limits = ARRAY_SIZE(mt6370_chg_otg_oc_ma),
+	.csel_reg = MT6370_REG_CHG_CTRL10,
+	.csel_mask = MT6370_OTG_OC_MASK,
+};
+
+static int mt6370_chg_init_rmap_fields(struct mt6370_priv *priv)
+{
+	int i;
+	const struct mt6370_chg_field *fds = mt6370_chg_fields;
+
+	for (i = 0; i < F_MAX; i++) {
+		priv->rmap_fields[i] = devm_regmap_field_alloc(priv->dev,
+							       priv->regmap,
+							       fds[i].field);
+		if (IS_ERR(priv->rmap_fields[i]))
+			return dev_err_probe(priv->dev,
+					PTR_ERR(priv->rmap_fields[i]),
+					"Failed to allocate regmapfield[%s]\n",
+					fds[i].name);
+	}
+
+	return 0;
+}
+
+static int mt6370_chg_init_setting(struct mt6370_priv *priv)
+{
+	int ret;
+
+	/* Disable usb_chg_en */
+	ret = mt6370_chg_field_set(priv, F_USBCHGEN, 0);
+	if (ret) {
+		dev_err(priv->dev, "Failed to disable usb_chg_en\n");
+		return ret;
+	}
+
+	/* Disable input current limit */
+	ret = mt6370_chg_field_set(priv, F_ILIM_EN, 0);
+	if (ret) {
+		dev_err(priv->dev, "Failed to disable input current limit\n");
+		return ret;
+	}
+
+	/* ICHG/IEOC Workaround, ICHG can not be set less than 900mA */
+	ret = mt6370_chg_field_set(priv, F_ICHG, 900000);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set ICHG to 900mA");
+		return ret;
+	}
+
+	/* Change input current limit selection to using IAICR results */
+	ret = mt6370_chg_field_set(priv, F_IINLMTSEL, 2);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set IINLMTSEL\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#define MT6370_CHG_DT_PROP_DECL(_name, _type, _field)	\
+{							\
+	.name = "mediatek,chg-" #_name,			\
+	.type = MT6370_PARSE_TYPE_##_type,		\
+	.fd = _field,					\
+}
+
+static int mt6370_chg_init_otg_regulator(struct mt6370_priv *priv)
+{
+	struct regulator_config rcfg = {
+		.dev = priv->dev,
+		.regmap = priv->regmap,
+		.driver_data = priv,
+	};
+
+	priv->rdev = devm_regulator_register(priv->dev, &mt6370_chg_otg_rdesc,
+					     &rcfg);
+
+	return PTR_ERR_OR_ZERO(priv->rdev);
+}
+
+static int mt6370_chg_init_psy(struct mt6370_priv *priv)
+{
+	struct power_supply_config cfg = {
+		.drv_data = priv,
+		.of_node = dev_of_node(priv->dev),
+	};
+
+	priv->psy = devm_power_supply_register(priv->dev, &mt6370_chg_psy_desc,
+					       &cfg);
+
+	return PTR_ERR_OR_ZERO(priv->psy);
+}
+
+static void mt6370_chg_destroy_attach_lock(void *data)
+{
+	struct mutex *attach_lock = data;
+
+	mutex_destroy(attach_lock);
+}
+
+static void mt6370_chg_destroy_wq(void *data)
+{
+	struct workqueue_struct *wq = data;
+
+	flush_workqueue(wq);
+	destroy_workqueue(wq);
+}
+
+static irqreturn_t mt6370_attach_i_handler(int irq, void *data)
+{
+	struct mt6370_priv *priv = data;
+	unsigned int otg_en;
+	int ret;
+
+	/* Check in OTG mode or not */
+	ret = mt6370_chg_field_get(priv, F_BOOST_STAT, &otg_en);
+	if (ret) {
+		dev_err(priv->dev, "Failed to get OTG state\n");
+		return IRQ_NONE;
+	}
+
+	if (otg_en)
+		return IRQ_HANDLED;
+
+	mutex_lock(&priv->attach_lock);
+	priv->attach = MT6370_ATTACH_STAT_ATTACH_BC12_DONE;
+	mutex_unlock(&priv->attach_lock);
+
+	if (!queue_work(priv->wq, &priv->bc12_work))
+		dev_err(priv->dev, "bc12 work has already queued\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_uvp_d_evt_handler(int irq, void *data)
+{
+	struct mt6370_priv *priv = data;
+
+	mt6370_chg_pwr_rdy_check(priv);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mt6370_mivr_handler(int irq, void *data)
+{
+	struct mt6370_priv *priv = data;
+
+	pm_stay_awake(priv->dev);
+	disable_irq_nosync(priv->irq_nums[MT6370_IRQ_MIVR]);
+	schedule_delayed_work(&priv->mivr_dwork, msecs_to_jiffies(200));
+
+	return IRQ_HANDLED;
+}
+
+#define MT6370_CHG_IRQ(_name)						\
+{									\
+	.name = #_name,							\
+	.handler = mt6370_##_name##_handler,				\
+}
+
+static int mt6370_chg_init_irq(struct mt6370_priv *priv)
+{
+	int i, ret;
+	const struct {
+		char *name;
+		irq_handler_t handler;
+	} mt6370_chg_irqs[] = {
+		MT6370_CHG_IRQ(attach_i),
+		MT6370_CHG_IRQ(uvp_d_evt),
+		MT6370_CHG_IRQ(mivr),
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mt6370_chg_irqs); i++) {
+		ret = platform_get_irq_byname(to_platform_device(priv->dev),
+					      mt6370_chg_irqs[i].name);
+		if (ret < 0)
+			return dev_err_probe(priv->dev, ret,
+					     "Failed to get irq %s\n",
+					     mt6370_chg_irqs[i].name);
+
+		priv->irq_nums[i] = ret;
+		ret = devm_request_threaded_irq(priv->dev, ret, NULL,
+						mt6370_chg_irqs[i].handler,
+						IRQF_TRIGGER_FALLING,
+						dev_name(priv->dev), priv);
+		if (ret)
+			return dev_err_probe(priv->dev, ret,
+					     "Failed to request irq %s\n",
+					     mt6370_chg_irqs[i].name);
+	}
+
+	return 0;
+}
+
+static int mt6370_chg_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mt6370_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "Failed to get regmap\n");
+
+	ret = mt6370_chg_init_rmap_fields(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init regmap fields\n");
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->iio_adcs = devm_iio_channel_get_all(priv->dev);
+	if (IS_ERR(priv->iio_adcs))
+		return dev_err_probe(dev, PTR_ERR(priv->iio_adcs),
+				     "Failed to get iio adc\n");
+
+	ret = mt6370_chg_init_otg_regulator(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init OTG regulator\n");
+
+	ret = mt6370_chg_init_psy(priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init psy\n");
+
+	mutex_init(&priv->attach_lock);
+	ret = devm_add_action_or_reset(dev, mt6370_chg_destroy_attach_lock,
+				       &priv->attach_lock);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init attach lock\n");
+
+	priv->attach = MT6370_ATTACH_STAT_DETACH;
+
+	priv->wq = create_singlethread_workqueue(dev_name(priv->dev));
+	if (!priv->wq)
+		return dev_err_probe(dev, -ENOMEM,
+				     "Failed to create workqueue\n");
+
+	ret = devm_add_action_or_reset(dev, mt6370_chg_destroy_wq, priv->wq);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init wq\n");
+
+	ret = devm_work_autocancel(dev, &priv->bc12_work, mt6370_chg_bc12_work_func);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init bc12 work\n");
+
+	ret = devm_delayed_work_autocancel(dev, &priv->mivr_dwork, mt6370_chg_mivr_dwork_func);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to init mivr delayed work\n");
+
+	ret = mt6370_chg_init_setting(priv);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Failed to init mt6370 charger setting\n");
+
+	ret = mt6370_chg_init_irq(priv);
+	if (ret)
+		return ret;
+
+	mt6370_chg_pwr_rdy_check(priv);
+
+	return 0;
+}
+
+static const struct of_device_id mt6370_chg_of_match[] = {
+	{ .compatible = "mediatek,mt6370-charger", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mt6370_chg_of_match);
+
+static struct platform_driver mt6370_chg_driver = {
+	.probe = mt6370_chg_probe,
+	.driver = {
+		.name = "mt6370-charger",
+		.of_match_table = mt6370_chg_of_match,
+	},
+};
+module_platform_driver(mt6370_chg_driver);
+
+MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>");
+MODULE_DESCRIPTION("MediaTek MT6370 Charger Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
new file mode 100644
index 000000000..a5da20ffd
--- /dev/null
+++ b/drivers/power/supply/olpc_battery.c
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for One Laptop Per Child board.
+ *
+ *	Copyright © 2006-2010  David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/olpc-ec.h>
+
+
+#define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
+#define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
+#define EC_BAT_ACR	0x12	/* int16_t,	*6250/15,    µAh  */
+#define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
+#define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
+#define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
+#define EC_BAT_SOC	0x16	/* uint8_t,	percentage */
+#define EC_BAT_SERIAL	0x17	/* uint8_t[6] */
+#define EC_BAT_EEPROM	0x18	/* uint8_t adr as input, uint8_t output */
+#define EC_BAT_ERRCODE	0x1f	/* uint8_t,	bitmask */
+
+#define BAT_STAT_PRESENT	0x01
+#define BAT_STAT_FULL		0x02
+#define BAT_STAT_LOW		0x04
+#define BAT_STAT_DESTROY	0x08
+#define BAT_STAT_AC		0x10
+#define BAT_STAT_CHARGING	0x20
+#define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
+
+#define BAT_ERR_INFOFAIL	0x02
+#define BAT_ERR_OVERVOLTAGE	0x04
+#define BAT_ERR_OVERTEMP	0x05
+#define BAT_ERR_GAUGESTOP	0x06
+#define BAT_ERR_OUT_OF_CONTROL	0x07
+#define BAT_ERR_ID_FAIL		0x09
+#define BAT_ERR_ACR_FAIL	0x10
+
+#define BAT_ADDR_MFR_TYPE	0x5F
+
+struct olpc_battery_data {
+	struct power_supply *olpc_ac;
+	struct power_supply *olpc_bat;
+	char bat_serial[17];
+	bool new_proto;
+	bool little_endian;
+};
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int olpc_ac_get_prop(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	uint8_t status;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+		if (ret)
+			return ret;
+
+		val->intval = !!(status & BAT_STAT_AC);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property olpc_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc olpc_ac_desc = {
+	.name = "olpc_ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = olpc_ac_props,
+	.num_properties = ARRAY_SIZE(olpc_ac_props),
+	.get_property = olpc_ac_get_prop,
+};
+
+static int olpc_bat_get_status(struct olpc_battery_data *data,
+		union power_supply_propval *val, uint8_t ec_byte)
+{
+	if (data->new_proto) {
+		if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ec_byte & BAT_STAT_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* er,... */
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		/* Older EC didn't report charge/discharge bits */
+		if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else /* Not _necessarily_ true but EC doesn't tell all yet */
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+	}
+
+	return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte) {
+	case 0:
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+
+	case BAT_ERR_OVERTEMP:
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+
+	case BAT_ERR_OVERVOLTAGE:
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		break;
+
+	case BAT_ERR_INFOFAIL:
+	case BAT_ERR_OUT_OF_CONTROL:
+	case BAT_ERR_ID_FAIL:
+	case BAT_ERR_ACR_FAIL:
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+
+	default:
+		/* Eep. We don't know this failure code */
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte >> 4) {
+	case 1:
+		val->strval = "Gold Peak";
+		break;
+	case 2:
+		val->strval = "BYD";
+		break;
+	default:
+		val->strval = "Unknown";
+		break;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	int ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	switch (ec_byte & 0xf) {
+	case 1:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		break;
+	case 2:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_charge_full_design(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	union power_supply_propval tech;
+	int ret, mfr;
+
+	ret = olpc_bat_get_tech(&tech);
+	if (ret)
+		return ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	mfr = ec_byte >> 4;
+
+	switch (tech.intval) {
+	case POWER_SUPPLY_TECHNOLOGY_NiMH:
+		switch (mfr) {
+		case 1: /* Gold Peak */
+			val->intval = 3000000*.8;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	case POWER_SUPPLY_TECHNOLOGY_LiFe:
+		switch (mfr) {
+		case 1: /* Gold Peak, fall through */
+		case 2: /* BYD */
+			val->intval = 2800000;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	default:
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static int olpc_bat_get_charge_now(union power_supply_propval *val)
+{
+	uint8_t soc;
+	union power_supply_propval full;
+	int ret;
+
+	ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &soc, 1);
+	if (ret)
+		return ret;
+
+	ret = olpc_bat_get_charge_full_design(&full);
+	if (ret)
+		return ret;
+
+	val->intval = soc * (full.intval / 100);
+	return 0;
+}
+
+static int olpc_bat_get_voltage_max_design(union power_supply_propval *val)
+{
+	uint8_t ec_byte;
+	union power_supply_propval tech;
+	int mfr;
+	int ret;
+
+	ret = olpc_bat_get_tech(&tech);
+	if (ret)
+		return ret;
+
+	ec_byte = BAT_ADDR_MFR_TYPE;
+	ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	mfr = ec_byte >> 4;
+
+	switch (tech.intval) {
+	case POWER_SUPPLY_TECHNOLOGY_NiMH:
+		switch (mfr) {
+		case 1: /* Gold Peak */
+			val->intval = 6000000;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	case POWER_SUPPLY_TECHNOLOGY_LiFe:
+		switch (mfr) {
+		case 1: /* Gold Peak */
+			val->intval = 6400000;
+			break;
+		case 2: /* BYD */
+			val->intval = 6500000;
+			break;
+		default:
+			return -EIO;
+		}
+		break;
+
+	default:
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static u16 ecword_to_cpu(struct olpc_battery_data *data, u16 ec_word)
+{
+	if (data->little_endian)
+		return le16_to_cpu((__force __le16)ec_word);
+	else
+		return be16_to_cpu((__force __be16)ec_word);
+}
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+static int olpc_bat_get_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	struct olpc_battery_data *data = power_supply_get_drvdata(psy);
+	int ret = 0;
+	u16 ec_word;
+	uint8_t ec_byte;
+	__be64 ser_buf;
+
+	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	/* Theoretically there's a race here -- the battery could be
+	   removed immediately after we check whether it's present, and
+	   then we query for some other property of the now-absent battery.
+	   It doesn't matter though -- the EC will return the last-known
+	   information, and it's as if we just ran that _little_ bit faster
+	   and managed to read it out before the battery went away. */
+	if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = olpc_bat_get_status(data, val, ec_byte);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (ec_byte & BAT_STAT_TRICKLE)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		else if (ec_byte & BAT_STAT_CHARGING)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+					    BAT_STAT_TRICKLE));
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (ec_byte & BAT_STAT_DESTROY)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else {
+			ret = olpc_bat_get_health(val);
+			if (ret)
+				return ret;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		ret = olpc_bat_get_mfr(val);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		ret = olpc_bat_get_tech(val);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		val->intval = ecword_to_cpu(data, ec_word) * 9760L / 32;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		val->intval = ecword_to_cpu(data, ec_word) * 15625L / 120;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
+		if (ret)
+			return ret;
+		val->intval = ec_byte;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (ec_byte & BAT_STAT_LOW)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = olpc_bat_get_charge_full_design(val);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = olpc_bat_get_charge_now(val);
+		if (ret)
+			return ret;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		val->intval = ecword_to_cpu(data, ec_word) * 10 / 256;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+		ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		val->intval = (int)ecword_to_cpu(data, ec_word) * 10 / 256;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		val->intval = ecword_to_cpu(data, ec_word) * 6250 / 15;
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+		if (ret)
+			return ret;
+
+		sprintf(data->bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+		val->strval = data->bat_serial;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		ret = olpc_bat_get_voltage_max_design(val);
+		if (ret)
+			return ret;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property olpc_xo1_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+/* XO-1.5 does not have ambient temperature property */
+static enum power_supply_property olpc_xo15_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START	0x20
+#define EEPROM_END	0x80
+#define EEPROM_SIZE	(EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+	uint8_t ec_byte;
+	int ret;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		ec_byte = EEPROM_START + off + i;
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
+		if (ret) {
+			pr_err("olpc-battery: "
+			       "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+			       ec_byte, ret);
+			return -EIO;
+		}
+	}
+
+	return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+	},
+	.size = EEPROM_SIZE,
+	.read = olpc_bat_eeprom_read,
+};
+
+/* Allow userspace to see the specific error value pulled from the EC */
+
+static ssize_t olpc_bat_error_read(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	uint8_t ec_byte;
+	ssize_t ret;
+
+	ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ec_byte);
+}
+
+static struct device_attribute olpc_bat_error = {
+	.attr = {
+		.name = "error",
+		.mode = S_IRUGO,
+	},
+	.show = olpc_bat_error_read,
+};
+
+static struct attribute *olpc_bat_sysfs_attrs[] = {
+	&olpc_bat_error.attr,
+	NULL
+};
+
+static struct bin_attribute *olpc_bat_sysfs_bin_attrs[] = {
+	&olpc_bat_eeprom,
+	NULL
+};
+
+static const struct attribute_group olpc_bat_sysfs_group = {
+	.attrs = olpc_bat_sysfs_attrs,
+	.bin_attrs = olpc_bat_sysfs_bin_attrs,
+
+};
+
+static const struct attribute_group *olpc_bat_sysfs_groups[] = {
+	&olpc_bat_sysfs_group,
+	NULL
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct power_supply_desc olpc_bat_desc = {
+	.name = "olpc_battery",
+	.get_property = olpc_bat_get_property,
+	.use_for_apm = 1,
+};
+
+static int olpc_battery_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	struct olpc_battery_data *data = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&data->olpc_ac->dev))
+		olpc_ec_wakeup_set(EC_SCI_SRC_ACPWR);
+	else
+		olpc_ec_wakeup_clear(EC_SCI_SRC_ACPWR);
+
+	if (device_may_wakeup(&data->olpc_bat->dev))
+		olpc_ec_wakeup_set(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+				   | EC_SCI_SRC_BATERR);
+	else
+		olpc_ec_wakeup_clear(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+				     | EC_SCI_SRC_BATERR);
+
+	return 0;
+}
+
+static int olpc_battery_probe(struct platform_device *pdev)
+{
+	struct power_supply_config bat_psy_cfg = {};
+	struct power_supply_config ac_psy_cfg = {};
+	struct olpc_battery_data *data;
+	struct device_node *np;
+	uint8_t status;
+	uint8_t ecver;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, data);
+
+	/* See if the EC is already there and get the EC revision */
+	ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1);
+	if (ret)
+		return ret;
+
+	np = of_find_compatible_node(NULL, NULL, "olpc,xo1.75-ec");
+	if (np) {
+		of_node_put(np);
+		/* XO 1.75 */
+		data->new_proto = true;
+		data->little_endian = true;
+	} else if (ecver > 0x44) {
+		/* XO 1 or 1.5 with a new EC firmware. */
+		data->new_proto = true;
+	} else if (ecver < 0x44) {
+		/*
+		 * We've seen a number of EC protocol changes; this driver
+		 * requires the latest EC protocol, supported by 0x44 and above.
+		 */
+		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+			"battery driver.\n", ecver);
+		return -ENXIO;
+	}
+
+	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+	if (ret)
+		return ret;
+
+	/* Ignore the status. It doesn't actually matter */
+
+	ac_psy_cfg.of_node = pdev->dev.of_node;
+	ac_psy_cfg.drv_data = data;
+
+	data->olpc_ac = devm_power_supply_register(&pdev->dev, &olpc_ac_desc,
+								&ac_psy_cfg);
+	if (IS_ERR(data->olpc_ac))
+		return PTR_ERR(data->olpc_ac);
+
+	if (of_device_is_compatible(pdev->dev.of_node, "olpc,xo1.5-battery")) {
+		/* XO-1.5 */
+		olpc_bat_desc.properties = olpc_xo15_bat_props;
+		olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo15_bat_props);
+	} else {
+		/* XO-1 */
+		olpc_bat_desc.properties = olpc_xo1_bat_props;
+		olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
+	}
+
+	bat_psy_cfg.of_node = pdev->dev.of_node;
+	bat_psy_cfg.drv_data = data;
+	bat_psy_cfg.attr_grp = olpc_bat_sysfs_groups;
+
+	data->olpc_bat = devm_power_supply_register(&pdev->dev, &olpc_bat_desc,
+								&bat_psy_cfg);
+	if (IS_ERR(data->olpc_bat))
+		return PTR_ERR(data->olpc_bat);
+
+	if (olpc_ec_wakeup_available()) {
+		device_set_wakeup_capable(&data->olpc_ac->dev, true);
+		device_set_wakeup_capable(&data->olpc_bat->dev, true);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id olpc_battery_ids[] = {
+	{ .compatible = "olpc,xo1-battery" },
+	{ .compatible = "olpc,xo1.5-battery" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, olpc_battery_ids);
+
+static struct platform_driver olpc_battery_driver = {
+	.driver = {
+		.name = "olpc-battery",
+		.of_match_table = olpc_battery_ids,
+	},
+	.probe = olpc_battery_probe,
+	.suspend = olpc_battery_suspend,
+};
+
+module_platform_driver(olpc_battery_driver);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for One Laptop Per Child 'XO' machine");
diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
new file mode 100644
index 000000000..8c5d892f6
--- /dev/null
+++ b/drivers/power/supply/pcf50633-charger.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* NXP PCF50633 Main Battery Charger Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+
+struct pcf50633_mbc {
+	struct pcf50633 *pcf;
+
+	int adapter_online;
+	int usb_online;
+
+	struct power_supply *usb;
+	struct power_supply *adapter;
+	struct power_supply *ac;
+};
+
+int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+{
+	struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+	int ret = 0;
+	u8 bits;
+	u8 mbcs2, chgmod;
+	unsigned int mbcc5;
+
+	if (ma >= 1000) {
+		bits = PCF50633_MBCC7_USB_1000mA;
+		ma = 1000;
+	} else if (ma >= 500) {
+		bits = PCF50633_MBCC7_USB_500mA;
+		ma = 500;
+	} else if (ma >= 100) {
+		bits = PCF50633_MBCC7_USB_100mA;
+		ma = 100;
+	} else {
+		bits = PCF50633_MBCC7_USB_SUSPEND;
+		ma = 0;
+	}
+
+	ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+					PCF50633_MBCC7_USB_MASK, bits);
+	if (ret)
+		dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma);
+	else
+		dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+
+	/*
+	 * We limit the charging current to be the USB current limit.
+	 * The reason is that on pcf50633, when it enters PMU Standby mode,
+	 * which it does when the device goes "off", the USB current limit
+	 * reverts to the variant default.  In at least one common case, that
+	 * default is 500mA.  By setting the charging current to be the same
+	 * as the USB limit we set here before PMU standby, we enforce it only
+	 * using the correct amount of current even when the USB current limit
+	 * gets reset to the wrong thing
+	 */
+
+	if (mbc->pcf->pdata->charger_reference_current_ma) {
+		mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+		if (mbcc5 > 255)
+			mbcc5 = 255;
+		pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+	}
+
+	mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+	chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+	/* If chgmod == BATFULL, setting chgena has no effect.
+	 * Datasheet says we need to set resume instead but when autoresume is
+	 * used resume doesn't work. Clear and set chgena instead.
+	 */
+	if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
+		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+	else {
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
+				PCF50633_MBCC1_CHGENA);
+		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+				PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+	}
+
+	power_supply_changed(mbc->usb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
+
+int pcf50633_mbc_get_status(struct pcf50633 *pcf)
+{
+	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
+	int status = 0;
+	u8 chgmod;
+
+	if (!mbc)
+		return 0;
+
+	chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
+		& PCF50633_MBCS2_MBC_MASK;
+
+	if (mbc->usb_online)
+		status |= PCF50633_MBC_USB_ONLINE;
+	if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
+	    chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
+		status |= PCF50633_MBC_USB_ACTIVE;
+	if (mbc->adapter_online)
+		status |= PCF50633_MBC_ADAPTER_ONLINE;
+	if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
+	    chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
+		status |= PCF50633_MBC_ADAPTER_ACTIVE;
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
+{
+	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
+
+	if (!mbc)
+		return 0;
+
+	return mbc->usb_online;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
+
+static ssize_t
+show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+
+	u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+	u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+	return sprintf(buf, "%d\n", chgmod);
+}
+static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL);
+
+static ssize_t
+show_usblim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
+	unsigned int ma;
+
+	if (usblim == PCF50633_MBCC7_USB_1000mA)
+		ma = 1000;
+	else if (usblim == PCF50633_MBCC7_USB_500mA)
+		ma = 500;
+	else if (usblim == PCF50633_MBCC7_USB_100mA)
+		ma = 100;
+	else
+		ma = 0;
+
+	return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_usblim(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	unsigned long ma;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &ma);
+	if (ret)
+		return ret;
+
+	pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
+
+	return count;
+}
+
+static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+
+static ssize_t
+show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
+	unsigned int ma;
+
+	if (!mbc->pcf->pdata->charger_reference_current_ma)
+		return -ENODEV;
+
+	ma = (mbc->pcf->pdata->charger_reference_current_ma *  mbcc5) >> 8;
+
+	return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_chglim(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	unsigned long ma;
+	unsigned int mbcc5;
+	int ret;
+
+	if (!mbc->pcf->pdata->charger_reference_current_ma)
+		return -ENODEV;
+
+	ret = kstrtoul(buf, 10, &ma);
+	if (ret)
+		return ret;
+
+	mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+	if (mbcc5 > 255)
+		mbcc5 = 255;
+	pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+
+	return count;
+}
+
+/*
+ * This attribute allows to change MBC charging limit on the fly
+ * independently of usb current limit. It also gets set automatically every
+ * time usb current limit is changed.
+ */
+static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
+
+static struct attribute *pcf50633_mbc_sysfs_attrs[] = {
+	&dev_attr_chgmode.attr,
+	&dev_attr_usb_curlim.attr,
+	&dev_attr_chg_curlim.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(pcf50633_mbc_sysfs);
+
+static void
+pcf50633_mbc_irq_handler(int irq, void *data)
+{
+	struct pcf50633_mbc *mbc = data;
+
+	/* USB */
+	if (irq == PCF50633_IRQ_USBINS) {
+		mbc->usb_online = 1;
+	} else if (irq == PCF50633_IRQ_USBREM) {
+		mbc->usb_online = 0;
+		pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
+	}
+
+	/* Adapter */
+	if (irq == PCF50633_IRQ_ADPINS)
+		mbc->adapter_online = 1;
+	else if (irq == PCF50633_IRQ_ADPREM)
+		mbc->adapter_online = 0;
+
+	power_supply_changed(mbc->ac);
+	power_supply_changed(mbc->usb);
+	power_supply_changed(mbc->adapter);
+
+	if (mbc->pcf->pdata->mbc_event_callback)
+		mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+}
+
+static int adapter_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval =  mbc->adapter_online;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int usb_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+	int ret = 0;
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = mbc->usb_online &&
+				(usblim <= PCF50633_MBCC7_USB_500mA);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int ac_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+	int ret = 0;
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = mbc->usb_online &&
+				(usblim == PCF50633_MBCC7_USB_1000mA);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const u8 mbc_irq_handlers[] = {
+	PCF50633_IRQ_ADPINS,
+	PCF50633_IRQ_ADPREM,
+	PCF50633_IRQ_USBINS,
+	PCF50633_IRQ_USBREM,
+	PCF50633_IRQ_BATFULL,
+	PCF50633_IRQ_CHGHALT,
+	PCF50633_IRQ_THLIMON,
+	PCF50633_IRQ_THLIMOFF,
+	PCF50633_IRQ_USBLIMON,
+	PCF50633_IRQ_USBLIMOFF,
+	PCF50633_IRQ_LOWSYS,
+	PCF50633_IRQ_LOWBAT,
+};
+
+static const struct power_supply_desc pcf50633_mbc_adapter_desc = {
+	.name		= "adapter",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= power_props,
+	.num_properties	= ARRAY_SIZE(power_props),
+	.get_property	= &adapter_get_property,
+};
+
+static const struct power_supply_desc pcf50633_mbc_usb_desc = {
+	.name		= "usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= power_props,
+	.num_properties	= ARRAY_SIZE(power_props),
+	.get_property	= usb_get_property,
+};
+
+static const struct power_supply_desc pcf50633_mbc_ac_desc = {
+	.name		= "ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= power_props,
+	.num_properties	= ARRAY_SIZE(power_props),
+	.get_property	= ac_get_property,
+};
+
+static int pcf50633_mbc_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct power_supply_config usb_psy_cfg;
+	struct pcf50633_mbc *mbc;
+	int i;
+	u8 mbcs1;
+
+	mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL);
+	if (!mbc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mbc);
+	mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+	/* Set up IRQ handlers */
+	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+		pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
+					pcf50633_mbc_irq_handler, mbc);
+
+	psy_cfg.supplied_to		= mbc->pcf->pdata->batteries;
+	psy_cfg.num_supplicants		= mbc->pcf->pdata->num_batteries;
+	psy_cfg.drv_data		= mbc;
+
+	/* Create power supplies */
+	mbc->adapter = power_supply_register(&pdev->dev,
+					     &pcf50633_mbc_adapter_desc,
+					     &psy_cfg);
+	if (IS_ERR(mbc->adapter)) {
+		dev_err(mbc->pcf->dev, "failed to register adapter\n");
+		return PTR_ERR(mbc->adapter);
+	}
+
+	usb_psy_cfg = psy_cfg;
+	usb_psy_cfg.attr_grp = pcf50633_mbc_sysfs_groups;
+
+	mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc,
+					 &usb_psy_cfg);
+	if (IS_ERR(mbc->usb)) {
+		dev_err(mbc->pcf->dev, "failed to register usb\n");
+		power_supply_unregister(mbc->adapter);
+		return PTR_ERR(mbc->usb);
+	}
+
+	mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc,
+					&psy_cfg);
+	if (IS_ERR(mbc->ac)) {
+		dev_err(mbc->pcf->dev, "failed to register ac\n");
+		power_supply_unregister(mbc->adapter);
+		power_supply_unregister(mbc->usb);
+		return PTR_ERR(mbc->ac);
+	}
+
+	mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
+	if (mbcs1 & PCF50633_MBCS1_USBPRES)
+		pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
+	if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
+		pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
+
+	return 0;
+}
+
+static int pcf50633_mbc_remove(struct platform_device *pdev)
+{
+	struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
+	int i;
+
+	/* Remove IRQ handlers */
+	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+		pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
+
+	power_supply_unregister(mbc->usb);
+	power_supply_unregister(mbc->adapter);
+	power_supply_unregister(mbc->ac);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_mbc_driver = {
+	.driver = {
+		.name = "pcf50633-mbc",
+	},
+	.probe = pcf50633_mbc_probe,
+	.remove = pcf50633_mbc_remove,
+};
+
+module_platform_driver(pcf50633_mbc_driver);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 mbc driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-mbc");
diff --git a/drivers/power/supply/pda_power.c b/drivers/power/supply/pda_power.c
new file mode 100644
index 000000000..03a37fd6b
--- /dev/null
+++ b/drivers/power/supply/pda_power.c
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/regulator/consumer.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/usb/otg.h>
+
+static inline unsigned int get_irq_flags(struct resource *res)
+{
+	return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK);
+}
+
+static struct device *dev;
+static struct pda_power_pdata *pdata;
+static struct resource *ac_irq, *usb_irq;
+static struct delayed_work charger_work;
+static struct delayed_work polling_work;
+static struct delayed_work supply_work;
+static int polling;
+static struct power_supply *pda_psy_ac, *pda_psy_usb;
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static struct usb_phy *transceiver;
+static struct notifier_block otg_nb;
+#endif
+
+static struct regulator *ac_draw;
+
+enum {
+	PDA_PSY_OFFLINE = 0,
+	PDA_PSY_ONLINE = 1,
+	PDA_PSY_TO_CHANGE,
+};
+static int new_ac_status = -1;
+static int new_usb_status = -1;
+static int ac_status = -1;
+static int usb_status = -1;
+
+static int pda_power_get_property(struct power_supply *psy,
+				  enum power_supply_property psp,
+				  union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+			val->intval = pdata->is_ac_online ?
+				      pdata->is_ac_online() : 0;
+		else
+			val->intval = pdata->is_usb_online ?
+				      pdata->is_usb_online() : 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property pda_power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static char *pda_power_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static const struct power_supply_desc pda_psy_ac_desc = {
+	.name = "ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = pda_power_props,
+	.num_properties = ARRAY_SIZE(pda_power_props),
+	.get_property = pda_power_get_property,
+};
+
+static const struct power_supply_desc pda_psy_usb_desc = {
+	.name = "usb",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = pda_power_props,
+	.num_properties = ARRAY_SIZE(pda_power_props),
+	.get_property = pda_power_get_property,
+};
+
+static void update_status(void)
+{
+	if (pdata->is_ac_online)
+		new_ac_status = !!pdata->is_ac_online();
+
+	if (pdata->is_usb_online)
+		new_usb_status = !!pdata->is_usb_online();
+}
+
+static void update_charger(void)
+{
+	static int regulator_enabled;
+	int max_uA = pdata->ac_max_uA;
+
+	if (pdata->set_charge) {
+		if (new_ac_status > 0) {
+			dev_dbg(dev, "charger on (AC)\n");
+			pdata->set_charge(PDA_POWER_CHARGE_AC);
+		} else if (new_usb_status > 0) {
+			dev_dbg(dev, "charger on (USB)\n");
+			pdata->set_charge(PDA_POWER_CHARGE_USB);
+		} else {
+			dev_dbg(dev, "charger off\n");
+			pdata->set_charge(0);
+		}
+	} else if (ac_draw) {
+		if (new_ac_status > 0) {
+			regulator_set_current_limit(ac_draw, max_uA, max_uA);
+			if (!regulator_enabled) {
+				dev_dbg(dev, "charger on (AC)\n");
+				WARN_ON(regulator_enable(ac_draw));
+				regulator_enabled = 1;
+			}
+		} else {
+			if (regulator_enabled) {
+				dev_dbg(dev, "charger off\n");
+				WARN_ON(regulator_disable(ac_draw));
+				regulator_enabled = 0;
+			}
+		}
+	}
+}
+
+static void supply_work_func(struct work_struct *work)
+{
+	if (ac_status == PDA_PSY_TO_CHANGE) {
+		ac_status = new_ac_status;
+		power_supply_changed(pda_psy_ac);
+	}
+
+	if (usb_status == PDA_PSY_TO_CHANGE) {
+		usb_status = new_usb_status;
+		power_supply_changed(pda_psy_usb);
+	}
+}
+
+static void psy_changed(void)
+{
+	update_charger();
+
+	/*
+	 * Okay, charger set. Now wait a bit before notifying supplicants,
+	 * charge power should stabilize.
+	 */
+	cancel_delayed_work(&supply_work);
+	schedule_delayed_work(&supply_work,
+			      msecs_to_jiffies(pdata->wait_for_charger));
+}
+
+static void charger_work_func(struct work_struct *work)
+{
+	update_status();
+	psy_changed();
+}
+
+static irqreturn_t power_changed_isr(int irq, void *power_supply)
+{
+	if (power_supply == pda_psy_ac)
+		ac_status = PDA_PSY_TO_CHANGE;
+	else if (power_supply == pda_psy_usb)
+		usb_status = PDA_PSY_TO_CHANGE;
+	else
+		return IRQ_NONE;
+
+	/*
+	 * Wait a bit before reading ac/usb line status and setting charger,
+	 * because ac/usb status readings may lag from irq.
+	 */
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
+
+	return IRQ_HANDLED;
+}
+
+static void polling_work_func(struct work_struct *work)
+{
+	int changed = 0;
+
+	dev_dbg(dev, "polling...\n");
+
+	update_status();
+
+	if (!ac_irq && new_ac_status != ac_status) {
+		ac_status = PDA_PSY_TO_CHANGE;
+		changed = 1;
+	}
+
+	if (!usb_irq && new_usb_status != usb_status) {
+		usb_status = PDA_PSY_TO_CHANGE;
+		changed = 1;
+	}
+
+	if (changed)
+		psy_changed();
+
+	cancel_delayed_work(&polling_work);
+	schedule_delayed_work(&polling_work,
+			      msecs_to_jiffies(pdata->polling_interval));
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static int otg_is_usb_online(void)
+{
+	return (transceiver->last_event == USB_EVENT_VBUS ||
+		transceiver->last_event == USB_EVENT_ENUMERATED);
+}
+
+static int otg_is_ac_online(void)
+{
+	return (transceiver->last_event == USB_EVENT_CHARGER);
+}
+
+static int otg_handle_notification(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	switch (event) {
+	case USB_EVENT_CHARGER:
+		ac_status = PDA_PSY_TO_CHANGE;
+		break;
+	case USB_EVENT_VBUS:
+	case USB_EVENT_ENUMERATED:
+		usb_status = PDA_PSY_TO_CHANGE;
+		break;
+	case USB_EVENT_NONE:
+		ac_status = PDA_PSY_TO_CHANGE;
+		usb_status = PDA_PSY_TO_CHANGE;
+		break;
+	default:
+		return NOTIFY_OK;
+	}
+
+	/*
+	 * Wait a bit before reading ac/usb line status and setting charger,
+	 * because ac/usb status readings may lag from irq.
+	 */
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
+
+	return NOTIFY_OK;
+}
+#endif
+
+static int pda_power_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	int ret = 0;
+
+	dev = &pdev->dev;
+
+	if (pdev->id != -1) {
+		dev_err(dev, "it's meaningless to register several "
+			"pda_powers; use id = -1\n");
+		ret = -EINVAL;
+		goto wrongid;
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	if (pdata->init) {
+		ret = pdata->init(dev);
+		if (ret < 0)
+			goto init_failed;
+	}
+
+	ac_draw = regulator_get(dev, "ac_draw");
+	if (IS_ERR(ac_draw)) {
+		dev_dbg(dev, "couldn't get ac_draw regulator\n");
+		ac_draw = NULL;
+	}
+
+	update_status();
+	update_charger();
+
+	if (!pdata->wait_for_status)
+		pdata->wait_for_status = 500;
+
+	if (!pdata->wait_for_charger)
+		pdata->wait_for_charger = 500;
+
+	if (!pdata->polling_interval)
+		pdata->polling_interval = 2000;
+
+	if (!pdata->ac_max_uA)
+		pdata->ac_max_uA = 500000;
+
+	INIT_DELAYED_WORK(&charger_work, charger_work_func);
+	INIT_DELAYED_WORK(&supply_work, supply_work_func);
+
+	ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
+	usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
+
+	if (pdata->supplied_to) {
+		psy_cfg.supplied_to = pdata->supplied_to;
+		psy_cfg.num_supplicants = pdata->num_supplicants;
+	} else {
+		psy_cfg.supplied_to = pda_power_supplied_to;
+		psy_cfg.num_supplicants = ARRAY_SIZE(pda_power_supplied_to);
+	}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+	transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (!IS_ERR_OR_NULL(transceiver)) {
+		if (!pdata->is_usb_online)
+			pdata->is_usb_online = otg_is_usb_online;
+		if (!pdata->is_ac_online)
+			pdata->is_ac_online = otg_is_ac_online;
+	}
+#endif
+
+	if (pdata->is_ac_online) {
+		pda_psy_ac = power_supply_register(&pdev->dev,
+						   &pda_psy_ac_desc, &psy_cfg);
+		if (IS_ERR(pda_psy_ac)) {
+			dev_err(dev, "failed to register %s power supply\n",
+				pda_psy_ac_desc.name);
+			ret = PTR_ERR(pda_psy_ac);
+			goto ac_supply_failed;
+		}
+
+		if (ac_irq) {
+			ret = request_irq(ac_irq->start, power_changed_isr,
+					  get_irq_flags(ac_irq), ac_irq->name,
+					  pda_psy_ac);
+			if (ret) {
+				dev_err(dev, "request ac irq failed\n");
+				goto ac_irq_failed;
+			}
+		} else {
+			polling = 1;
+		}
+	}
+
+	if (pdata->is_usb_online) {
+		pda_psy_usb = power_supply_register(&pdev->dev,
+						    &pda_psy_usb_desc,
+						    &psy_cfg);
+		if (IS_ERR(pda_psy_usb)) {
+			dev_err(dev, "failed to register %s power supply\n",
+				pda_psy_usb_desc.name);
+			ret = PTR_ERR(pda_psy_usb);
+			goto usb_supply_failed;
+		}
+
+		if (usb_irq) {
+			ret = request_irq(usb_irq->start, power_changed_isr,
+					  get_irq_flags(usb_irq),
+					  usb_irq->name, pda_psy_usb);
+			if (ret) {
+				dev_err(dev, "request usb irq failed\n");
+				goto usb_irq_failed;
+			}
+		} else {
+			polling = 1;
+		}
+	}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) {
+		otg_nb.notifier_call = otg_handle_notification;
+		ret = usb_register_notifier(transceiver, &otg_nb);
+		if (ret) {
+			dev_err(dev, "failure to register otg notifier\n");
+			goto otg_reg_notifier_failed;
+		}
+		polling = 0;
+	}
+#endif
+
+	if (polling) {
+		dev_dbg(dev, "will poll for status\n");
+		INIT_DELAYED_WORK(&polling_work, polling_work_func);
+		cancel_delayed_work(&polling_work);
+		schedule_delayed_work(&polling_work,
+				      msecs_to_jiffies(pdata->polling_interval));
+	}
+
+	if (ac_irq || usb_irq)
+		device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+otg_reg_notifier_failed:
+	if (pdata->is_usb_online && usb_irq)
+		free_irq(usb_irq->start, pda_psy_usb);
+#endif
+usb_irq_failed:
+	if (pdata->is_usb_online)
+		power_supply_unregister(pda_psy_usb);
+usb_supply_failed:
+	if (pdata->is_ac_online && ac_irq)
+		free_irq(ac_irq->start, pda_psy_ac);
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (!IS_ERR_OR_NULL(transceiver))
+		usb_put_phy(transceiver);
+#endif
+ac_irq_failed:
+	if (pdata->is_ac_online)
+		power_supply_unregister(pda_psy_ac);
+ac_supply_failed:
+	if (ac_draw) {
+		regulator_put(ac_draw);
+		ac_draw = NULL;
+	}
+	if (pdata->exit)
+		pdata->exit(dev);
+init_failed:
+wrongid:
+	return ret;
+}
+
+static int pda_power_remove(struct platform_device *pdev)
+{
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier)
+		usb_unregister_notifier(transceiver, &otg_nb);
+#endif
+	if (pdata->is_usb_online && usb_irq)
+		free_irq(usb_irq->start, pda_psy_usb);
+	if (pdata->is_ac_online && ac_irq)
+		free_irq(ac_irq->start, pda_psy_ac);
+
+	if (polling)
+		cancel_delayed_work_sync(&polling_work);
+	cancel_delayed_work_sync(&charger_work);
+	cancel_delayed_work_sync(&supply_work);
+
+	if (pdata->is_usb_online)
+		power_supply_unregister(pda_psy_usb);
+	if (pdata->is_ac_online)
+		power_supply_unregister(pda_psy_ac);
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (!IS_ERR_OR_NULL(transceiver))
+		usb_put_phy(transceiver);
+#endif
+	if (ac_draw) {
+		regulator_put(ac_draw);
+		ac_draw = NULL;
+	}
+	if (pdata->exit)
+		pdata->exit(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ac_wakeup_enabled;
+static int usb_wakeup_enabled;
+
+static int pda_power_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (pdata->suspend) {
+		int ret = pdata->suspend(state);
+
+		if (ret)
+			return ret;
+	}
+
+	if (device_may_wakeup(&pdev->dev)) {
+		if (ac_irq)
+			ac_wakeup_enabled = !enable_irq_wake(ac_irq->start);
+		if (usb_irq)
+			usb_wakeup_enabled = !enable_irq_wake(usb_irq->start);
+	}
+
+	return 0;
+}
+
+static int pda_power_resume(struct platform_device *pdev)
+{
+	if (device_may_wakeup(&pdev->dev)) {
+		if (usb_irq && usb_wakeup_enabled)
+			disable_irq_wake(usb_irq->start);
+		if (ac_irq && ac_wakeup_enabled)
+			disable_irq_wake(ac_irq->start);
+	}
+
+	if (pdata->resume)
+		return pdata->resume();
+
+	return 0;
+}
+#else
+#define pda_power_suspend NULL
+#define pda_power_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver pda_power_pdrv = {
+	.driver = {
+		.name = "pda-power",
+	},
+	.probe = pda_power_probe,
+	.remove = pda_power_remove,
+	.suspend = pda_power_suspend,
+	.resume = pda_power_resume,
+};
+
+module_platform_driver(pda_power_pdrv);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
+MODULE_ALIAS("platform:pda-power");
diff --git a/drivers/power/supply/pmu_battery.c b/drivers/power/supply/pmu_battery.c
new file mode 100644
index 000000000..eaab7500d
--- /dev/null
+++ b/drivers/power/supply/pmu_battery.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery class driver for Apple PMU
+ *
+ *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/slab.h>
+
+static struct pmu_battery_dev {
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct pmu_battery_info *pbi;
+	char name[16];
+	int propval;
+} *pbats[PMU_MAX_BATTERIES];
+
+#define to_pmu_battery_dev(x) power_supply_get_drvdata(x)
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int pmu_get_ac_prop(struct power_supply *psy,
+			   enum power_supply_property psp,
+			   union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = (!!(pmu_power_flags & PMU_PWR_AC_PRESENT)) ||
+			      (pmu_battery_count == 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc pmu_ac_desc = {
+	.name = "pmu-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = pmu_ac_props,
+	.num_properties = ARRAY_SIZE(pmu_ac_props),
+	.get_property = pmu_get_ac_prop,
+};
+
+static struct power_supply *pmu_ac;
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+static char *pmu_batt_types[] = {
+	"Smart", "Comet", "Hooper", "Unknown"
+};
+
+static char *pmu_bat_get_model_name(struct pmu_battery_info *pbi)
+{
+	switch (pbi->flags & PMU_BATT_TYPE_MASK) {
+	case PMU_BATT_TYPE_SMART:
+		return pmu_batt_types[0];
+	case PMU_BATT_TYPE_COMET:
+		return pmu_batt_types[1];
+	case PMU_BATT_TYPE_HOOPER:
+		return pmu_batt_types[2];
+	default: break;
+	}
+	return pmu_batt_types[3];
+}
+
+static int pmu_bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct pmu_battery_dev *pbat = to_pmu_battery_dev(psy);
+	struct pmu_battery_info *pbi = pbat->pbi;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (pbi->flags & PMU_BATT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (pmu_power_flags & PMU_PWR_AC_PRESENT)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(pbi->flags & PMU_BATT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = pmu_bat_get_model_name(pbi);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_AVG:
+		val->intval = pbi->charge     * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		val->intval = pbi->max_charge * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = pbi->amperage   * 1000; /* mA -> µA */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = pbi->voltage    * 1000; /* mV -> µV */
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		val->intval = pbi->time_remaining;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_ENERGY_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static int __init pmu_bat_init(void)
+{
+	int ret = 0;
+	int i;
+
+	bat_pdev = platform_device_register_simple("pmu-battery",
+						   0, NULL, 0);
+	if (IS_ERR(bat_pdev)) {
+		ret = PTR_ERR(bat_pdev);
+		goto pdev_register_failed;
+	}
+
+	pmu_ac = power_supply_register(&bat_pdev->dev, &pmu_ac_desc, NULL);
+	if (IS_ERR(pmu_ac)) {
+		ret = PTR_ERR(pmu_ac);
+		goto ac_register_failed;
+	}
+
+	for (i = 0; i < pmu_battery_count; i++) {
+		struct power_supply_config psy_cfg = {};
+		struct pmu_battery_dev *pbat = kzalloc(sizeof(*pbat),
+						       GFP_KERNEL);
+		if (!pbat)
+			break;
+
+		sprintf(pbat->name, "PMU_battery_%d", i);
+		pbat->bat_desc.name = pbat->name;
+		pbat->bat_desc.properties = pmu_bat_props;
+		pbat->bat_desc.num_properties = ARRAY_SIZE(pmu_bat_props);
+		pbat->bat_desc.get_property = pmu_bat_get_property;
+		pbat->pbi = &pmu_batteries[i];
+		psy_cfg.drv_data = pbat;
+
+		pbat->bat = power_supply_register(&bat_pdev->dev,
+						  &pbat->bat_desc,
+						  &psy_cfg);
+		if (IS_ERR(pbat->bat)) {
+			ret = PTR_ERR(pbat->bat);
+			kfree(pbat);
+			goto battery_register_failed;
+		}
+		pbats[i] = pbat;
+	}
+
+	goto success;
+
+battery_register_failed:
+	while (i--) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(pmu_ac);
+ac_register_failed:
+	platform_device_unregister(bat_pdev);
+pdev_register_failed:
+success:
+	return ret;
+}
+
+static void __exit pmu_bat_exit(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_MAX_BATTERIES; i++) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(pmu_ac);
+	platform_device_unregister(bat_pdev);
+}
+
+module_init(pmu_bat_init);
+module_exit(pmu_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PMU battery driver");
diff --git a/drivers/power/supply/power_supply.h b/drivers/power/supply/power_supply.h
new file mode 100644
index 000000000..c310d4f36
--- /dev/null
+++ b/drivers/power/supply/power_supply.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Functions private to power supply class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ */
+
+struct device;
+struct device_type;
+struct power_supply;
+
+#ifdef CONFIG_SYSFS
+
+extern void power_supply_init_attrs(struct device_type *dev_type);
+extern int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env);
+
+#else
+
+static inline void power_supply_init_attrs(struct device_type *dev_type) {}
+#define power_supply_uevent NULL
+
+#endif /* CONFIG_SYSFS */
+
+#ifdef CONFIG_LEDS_TRIGGERS
+
+extern void power_supply_update_leds(struct power_supply *psy);
+extern int power_supply_create_triggers(struct power_supply *psy);
+extern void power_supply_remove_triggers(struct power_supply *psy);
+
+#else
+
+static inline void power_supply_update_leds(struct power_supply *psy) {}
+static inline int power_supply_create_triggers(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_triggers(struct power_supply *psy) {}
+
+#endif /* CONFIG_LEDS_TRIGGERS */
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
new file mode 100644
index 000000000..ac88c9636
--- /dev/null
+++ b/drivers/power/supply/power_supply_core.c
@@ -0,0 +1,1493 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Universal power supply monitor class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/thermal.h>
+#include <linux/fixp-arith.h>
+#include "power_supply.h"
+#include "samsung-sdi-battery.h"
+
+/* exported for the APM Power driver, APM emulation */
+struct class *power_supply_class;
+EXPORT_SYMBOL_GPL(power_supply_class);
+
+BLOCKING_NOTIFIER_HEAD(power_supply_notifier);
+EXPORT_SYMBOL_GPL(power_supply_notifier);
+
+static struct device_type power_supply_dev_type;
+
+#define POWER_SUPPLY_DEFERRED_REGISTER_TIME	msecs_to_jiffies(10)
+
+static bool __power_supply_is_supplied_by(struct power_supply *supplier,
+					 struct power_supply *supply)
+{
+	int i;
+
+	if (!supply->supplied_from && !supplier->supplied_to)
+		return false;
+
+	/* Support both supplied_to and supplied_from modes */
+	if (supply->supplied_from) {
+		if (!supplier->desc->name)
+			return false;
+		for (i = 0; i < supply->num_supplies; i++)
+			if (!strcmp(supplier->desc->name, supply->supplied_from[i]))
+				return true;
+	} else {
+		if (!supply->desc->name)
+			return false;
+		for (i = 0; i < supplier->num_supplicants; i++)
+			if (!strcmp(supplier->supplied_to[i], supply->desc->name))
+				return true;
+	}
+
+	return false;
+}
+
+static int __power_supply_changed_work(struct device *dev, void *data)
+{
+	struct power_supply *psy = data;
+	struct power_supply *pst = dev_get_drvdata(dev);
+
+	if (__power_supply_is_supplied_by(psy, pst)) {
+		if (pst->desc->external_power_changed)
+			pst->desc->external_power_changed(pst);
+	}
+
+	return 0;
+}
+
+static void power_supply_changed_work(struct work_struct *work)
+{
+	unsigned long flags;
+	struct power_supply *psy = container_of(work, struct power_supply,
+						changed_work);
+
+	dev_dbg(&psy->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&psy->changed_lock, flags);
+	/*
+	 * Check 'changed' here to avoid issues due to race between
+	 * power_supply_changed() and this routine. In worst case
+	 * power_supply_changed() can be called again just before we take above
+	 * lock. During the first call of this routine we will mark 'changed' as
+	 * false and it will stay false for the next call as well.
+	 */
+	if (likely(psy->changed)) {
+		psy->changed = false;
+		spin_unlock_irqrestore(&psy->changed_lock, flags);
+		class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_changed_work);
+		power_supply_update_leds(psy);
+		blocking_notifier_call_chain(&power_supply_notifier,
+				PSY_EVENT_PROP_CHANGED, psy);
+		kobject_uevent(&psy->dev.kobj, KOBJ_CHANGE);
+		spin_lock_irqsave(&psy->changed_lock, flags);
+	}
+
+	/*
+	 * Hold the wakeup_source until all events are processed.
+	 * power_supply_changed() might have called again and have set 'changed'
+	 * to true.
+	 */
+	if (likely(!psy->changed))
+		pm_relax(&psy->dev);
+	spin_unlock_irqrestore(&psy->changed_lock, flags);
+}
+
+void power_supply_changed(struct power_supply *psy)
+{
+	unsigned long flags;
+
+	dev_dbg(&psy->dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&psy->changed_lock, flags);
+	psy->changed = true;
+	pm_stay_awake(&psy->dev);
+	spin_unlock_irqrestore(&psy->changed_lock, flags);
+	schedule_work(&psy->changed_work);
+}
+EXPORT_SYMBOL_GPL(power_supply_changed);
+
+/*
+ * Notify that power supply was registered after parent finished the probing.
+ *
+ * Often power supply is registered from driver's probe function. However
+ * calling power_supply_changed() directly from power_supply_register()
+ * would lead to execution of get_property() function provided by the driver
+ * too early - before the probe ends.
+ *
+ * Avoid that by waiting on parent's mutex.
+ */
+static void power_supply_deferred_register_work(struct work_struct *work)
+{
+	struct power_supply *psy = container_of(work, struct power_supply,
+						deferred_register_work.work);
+
+	if (psy->dev.parent) {
+		while (!mutex_trylock(&psy->dev.parent->mutex)) {
+			if (psy->removing)
+				return;
+			msleep(10);
+		}
+	}
+
+	power_supply_changed(psy);
+
+	if (psy->dev.parent)
+		mutex_unlock(&psy->dev.parent->mutex);
+}
+
+#ifdef CONFIG_OF
+static int __power_supply_populate_supplied_from(struct device *dev,
+						 void *data)
+{
+	struct power_supply *psy = data;
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct device_node *np;
+	int i = 0;
+
+	do {
+		np = of_parse_phandle(psy->of_node, "power-supplies", i++);
+		if (!np)
+			break;
+
+		if (np == epsy->of_node) {
+			dev_dbg(&psy->dev, "%s: Found supply : %s\n",
+				psy->desc->name, epsy->desc->name);
+			psy->supplied_from[i-1] = (char *)epsy->desc->name;
+			psy->num_supplies++;
+			of_node_put(np);
+			break;
+		}
+		of_node_put(np);
+	} while (np);
+
+	return 0;
+}
+
+static int power_supply_populate_supplied_from(struct power_supply *psy)
+{
+	int error;
+
+	error = class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_populate_supplied_from);
+
+	dev_dbg(&psy->dev, "%s %d\n", __func__, error);
+
+	return error;
+}
+
+static int  __power_supply_find_supply_from_node(struct device *dev,
+						 void *data)
+{
+	struct device_node *np = data;
+	struct power_supply *epsy = dev_get_drvdata(dev);
+
+	/* returning non-zero breaks out of class_for_each_device loop */
+	if (epsy->of_node == np)
+		return 1;
+
+	return 0;
+}
+
+static int power_supply_find_supply_from_node(struct device_node *supply_node)
+{
+	int error;
+
+	/*
+	 * class_for_each_device() either returns its own errors or values
+	 * returned by __power_supply_find_supply_from_node().
+	 *
+	 * __power_supply_find_supply_from_node() will return 0 (no match)
+	 * or 1 (match).
+	 *
+	 * We return 0 if class_for_each_device() returned 1, -EPROBE_DEFER if
+	 * it returned 0, or error as returned by it.
+	 */
+	error = class_for_each_device(power_supply_class, NULL, supply_node,
+				       __power_supply_find_supply_from_node);
+
+	return error ? (error == 1 ? 0 : error) : -EPROBE_DEFER;
+}
+
+static int power_supply_check_supplies(struct power_supply *psy)
+{
+	struct device_node *np;
+	int cnt = 0;
+
+	/* If there is already a list honor it */
+	if (psy->supplied_from && psy->num_supplies > 0)
+		return 0;
+
+	/* No device node found, nothing to do */
+	if (!psy->of_node)
+		return 0;
+
+	do {
+		int ret;
+
+		np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
+		if (!np)
+			break;
+
+		ret = power_supply_find_supply_from_node(np);
+		of_node_put(np);
+
+		if (ret) {
+			dev_dbg(&psy->dev, "Failed to find supply!\n");
+			return ret;
+		}
+	} while (np);
+
+	/* Missing valid "power-supplies" entries */
+	if (cnt == 1)
+		return 0;
+
+	/* All supplies found, allocate char ** array for filling */
+	psy->supplied_from = devm_kzalloc(&psy->dev, sizeof(*psy->supplied_from),
+					  GFP_KERNEL);
+	if (!psy->supplied_from)
+		return -ENOMEM;
+
+	*psy->supplied_from = devm_kcalloc(&psy->dev,
+					   cnt - 1, sizeof(**psy->supplied_from),
+					   GFP_KERNEL);
+	if (!*psy->supplied_from)
+		return -ENOMEM;
+
+	return power_supply_populate_supplied_from(psy);
+}
+#else
+static int power_supply_check_supplies(struct power_supply *psy)
+{
+	int nval, ret;
+
+	if (!psy->dev.parent)
+		return 0;
+
+	nval = device_property_string_array_count(psy->dev.parent, "supplied-from");
+	if (nval <= 0)
+		return 0;
+
+	psy->supplied_from = devm_kmalloc_array(&psy->dev, nval,
+						sizeof(char *), GFP_KERNEL);
+	if (!psy->supplied_from)
+		return -ENOMEM;
+
+	ret = device_property_read_string_array(psy->dev.parent,
+		"supplied-from", (const char **)psy->supplied_from, nval);
+	if (ret < 0)
+		return ret;
+
+	psy->num_supplies = nval;
+
+	return 0;
+}
+#endif
+
+struct psy_am_i_supplied_data {
+	struct power_supply *psy;
+	unsigned int count;
+};
+
+static int __power_supply_am_i_supplied(struct device *dev, void *_data)
+{
+	union power_supply_propval ret = {0,};
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct psy_am_i_supplied_data *data = _data;
+
+	if (__power_supply_is_supplied_by(epsy, data->psy)) {
+		data->count++;
+		if (!epsy->desc->get_property(epsy, POWER_SUPPLY_PROP_ONLINE,
+					&ret))
+			return ret.intval;
+	}
+
+	return 0;
+}
+
+int power_supply_am_i_supplied(struct power_supply *psy)
+{
+	struct psy_am_i_supplied_data data = { psy, 0 };
+	int error;
+
+	error = class_for_each_device(power_supply_class, NULL, &data,
+				      __power_supply_am_i_supplied);
+
+	dev_dbg(&psy->dev, "%s count %u err %d\n", __func__, data.count, error);
+
+	if (data.count == 0)
+		return -ENODEV;
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
+
+static int __power_supply_is_system_supplied(struct device *dev, void *data)
+{
+	union power_supply_propval ret = {0,};
+	struct power_supply *psy = dev_get_drvdata(dev);
+	unsigned int *count = data;
+
+	if (!psy->desc->get_property(psy, POWER_SUPPLY_PROP_SCOPE, &ret))
+		if (ret.intval == POWER_SUPPLY_SCOPE_DEVICE)
+			return 0;
+
+	(*count)++;
+	if (psy->desc->type != POWER_SUPPLY_TYPE_BATTERY)
+		if (!psy->desc->get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+					&ret))
+			return ret.intval;
+
+	return 0;
+}
+
+int power_supply_is_system_supplied(void)
+{
+	int error;
+	unsigned int count = 0;
+
+	error = class_for_each_device(power_supply_class, NULL, &count,
+				      __power_supply_is_system_supplied);
+
+	/*
+	 * If no system scope power class device was found at all, most probably we
+	 * are running on a desktop system, so assume we are on mains power.
+	 */
+	if (count == 0)
+		return 1;
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
+
+struct psy_get_supplier_prop_data {
+	struct power_supply *psy;
+	enum power_supply_property psp;
+	union power_supply_propval *val;
+};
+
+static int __power_supply_get_supplier_property(struct device *dev, void *_data)
+{
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct psy_get_supplier_prop_data *data = _data;
+
+	if (__power_supply_is_supplied_by(epsy, data->psy))
+		if (!epsy->desc->get_property(epsy, data->psp, data->val))
+			return 1; /* Success */
+
+	return 0; /* Continue iterating */
+}
+
+int power_supply_get_property_from_supplier(struct power_supply *psy,
+					    enum power_supply_property psp,
+					    union power_supply_propval *val)
+{
+	struct psy_get_supplier_prop_data data = {
+		.psy = psy,
+		.psp = psp,
+		.val = val,
+	};
+	int ret;
+
+	/*
+	 * This function is not intended for use with a supply with multiple
+	 * suppliers, we simply pick the first supply to report the psp.
+	 */
+	ret = class_for_each_device(power_supply_class, NULL, &data,
+				    __power_supply_get_supplier_property);
+	if (ret < 0)
+		return ret;
+	if (ret == 0)
+		return -ENODEV;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_property_from_supplier);
+
+int power_supply_set_battery_charged(struct power_supply *psy)
+{
+	if (atomic_read(&psy->use_cnt) >= 0 &&
+			psy->desc->type == POWER_SUPPLY_TYPE_BATTERY &&
+			psy->desc->set_charged) {
+		psy->desc->set_charged(psy);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
+
+static int power_supply_match_device_by_name(struct device *dev, const void *data)
+{
+	const char *name = data;
+	struct power_supply *psy = dev_get_drvdata(dev);
+
+	return strcmp(psy->desc->name, name) == 0;
+}
+
+/**
+ * power_supply_get_by_name() - Search for a power supply and returns its ref
+ * @name: Power supply name to fetch
+ *
+ * If power supply was found, it increases reference count for the
+ * internal power supply's device. The user should power_supply_put()
+ * after usage.
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to @name, a NULL otherwise.
+ */
+struct power_supply *power_supply_get_by_name(const char *name)
+{
+	struct power_supply *psy = NULL;
+	struct device *dev = class_find_device(power_supply_class, NULL, name,
+					power_supply_match_device_by_name);
+
+	if (dev) {
+		psy = dev_get_drvdata(dev);
+		atomic_inc(&psy->use_cnt);
+	}
+
+	return psy;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_name);
+
+/**
+ * power_supply_put() - Drop reference obtained with power_supply_get_by_name
+ * @psy: Reference to put
+ *
+ * The reference to power supply should be put before unregistering
+ * the power supply.
+ */
+void power_supply_put(struct power_supply *psy)
+{
+	might_sleep();
+
+	atomic_dec(&psy->use_cnt);
+	put_device(&psy->dev);
+}
+EXPORT_SYMBOL_GPL(power_supply_put);
+
+#ifdef CONFIG_OF
+static int power_supply_match_device_node(struct device *dev, const void *data)
+{
+	return dev->parent && dev->parent->of_node == data;
+}
+
+/**
+ * power_supply_get_by_phandle() - Search for a power supply and returns its ref
+ * @np: Pointer to device node holding phandle property
+ * @property: Name of property holding a power supply name
+ *
+ * If power supply was found, it increases reference count for the
+ * internal power supply's device. The user should power_supply_put()
+ * after usage.
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to value under @property, NULL or ERR_PTR otherwise.
+ */
+struct power_supply *power_supply_get_by_phandle(struct device_node *np,
+							const char *property)
+{
+	struct device_node *power_supply_np;
+	struct power_supply *psy = NULL;
+	struct device *dev;
+
+	power_supply_np = of_parse_phandle(np, property, 0);
+	if (!power_supply_np)
+		return ERR_PTR(-ENODEV);
+
+	dev = class_find_device(power_supply_class, NULL, power_supply_np,
+						power_supply_match_device_node);
+
+	of_node_put(power_supply_np);
+
+	if (dev) {
+		psy = dev_get_drvdata(dev);
+		atomic_inc(&psy->use_cnt);
+	}
+
+	return psy;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_phandle);
+
+static void devm_power_supply_put(struct device *dev, void *res)
+{
+	struct power_supply **psy = res;
+
+	power_supply_put(*psy);
+}
+
+/**
+ * devm_power_supply_get_by_phandle() - Resource managed version of
+ *  power_supply_get_by_phandle()
+ * @dev: Pointer to device holding phandle property
+ * @property: Name of property holding a power supply phandle
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to value under @property, NULL or ERR_PTR otherwise.
+ */
+struct power_supply *devm_power_supply_get_by_phandle(struct device *dev,
+						      const char *property)
+{
+	struct power_supply **ptr, *psy;
+
+	if (!dev->of_node)
+		return ERR_PTR(-ENODEV);
+
+	ptr = devres_alloc(devm_power_supply_put, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	psy = power_supply_get_by_phandle(dev->of_node, property);
+	if (IS_ERR_OR_NULL(psy)) {
+		devres_free(ptr);
+	} else {
+		*ptr = psy;
+		devres_add(dev, ptr);
+	}
+	return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_get_by_phandle);
+#endif /* CONFIG_OF */
+
+int power_supply_get_battery_info(struct power_supply *psy,
+				  struct power_supply_battery_info **info_out)
+{
+	struct power_supply_resistance_temp_table *resist_table;
+	struct power_supply_battery_info *info;
+	struct device_node *battery_np = NULL;
+	struct fwnode_reference_args args;
+	struct fwnode_handle *fwnode;
+	const char *value;
+	int err, len, index;
+	const __be32 *list;
+	u32 min_max[2];
+
+	if (psy->of_node) {
+		battery_np = of_parse_phandle(psy->of_node, "monitored-battery", 0);
+		if (!battery_np)
+			return -ENODEV;
+
+		fwnode = fwnode_handle_get(of_fwnode_handle(battery_np));
+	} else {
+		err = fwnode_property_get_reference_args(
+					dev_fwnode(psy->dev.parent),
+					"monitored-battery", NULL, 0, 0, &args);
+		if (err)
+			return err;
+
+		fwnode = args.fwnode;
+	}
+
+	err = fwnode_property_read_string(fwnode, "compatible", &value);
+	if (err)
+		goto out_put_node;
+
+
+	/* Try static batteries first */
+	err = samsung_sdi_battery_get_info(&psy->dev, value, &info);
+	if (!err)
+		goto out_ret_pointer;
+	else if (err == -ENODEV)
+		/*
+		 * Device does not have a static battery.
+		 * Proceed to look for a simple battery.
+		 */
+		err = 0;
+
+	if (strcmp("simple-battery", value)) {
+		err = -ENODEV;
+		goto out_put_node;
+	}
+
+	info = devm_kzalloc(&psy->dev, sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		err = -ENOMEM;
+		goto out_put_node;
+	}
+
+	info->technology                     = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+	info->energy_full_design_uwh         = -EINVAL;
+	info->charge_full_design_uah         = -EINVAL;
+	info->voltage_min_design_uv          = -EINVAL;
+	info->voltage_max_design_uv          = -EINVAL;
+	info->precharge_current_ua           = -EINVAL;
+	info->charge_term_current_ua         = -EINVAL;
+	info->constant_charge_current_max_ua = -EINVAL;
+	info->constant_charge_voltage_max_uv = -EINVAL;
+	info->tricklecharge_current_ua       = -EINVAL;
+	info->precharge_voltage_max_uv       = -EINVAL;
+	info->charge_restart_voltage_uv      = -EINVAL;
+	info->overvoltage_limit_uv           = -EINVAL;
+	info->maintenance_charge             = NULL;
+	info->alert_low_temp_charge_current_ua = -EINVAL;
+	info->alert_low_temp_charge_voltage_uv = -EINVAL;
+	info->alert_high_temp_charge_current_ua = -EINVAL;
+	info->alert_high_temp_charge_voltage_uv = -EINVAL;
+	info->temp_ambient_alert_min         = INT_MIN;
+	info->temp_ambient_alert_max         = INT_MAX;
+	info->temp_alert_min                 = INT_MIN;
+	info->temp_alert_max                 = INT_MAX;
+	info->temp_min                       = INT_MIN;
+	info->temp_max                       = INT_MAX;
+	info->factory_internal_resistance_uohm  = -EINVAL;
+	info->resist_table                   = NULL;
+	info->bti_resistance_ohm             = -EINVAL;
+	info->bti_resistance_tolerance       = -EINVAL;
+
+	for (index = 0; index < POWER_SUPPLY_OCV_TEMP_MAX; index++) {
+		info->ocv_table[index]       = NULL;
+		info->ocv_temp[index]        = -EINVAL;
+		info->ocv_table_size[index]  = -EINVAL;
+	}
+
+	/* The property and field names below must correspond to elements
+	 * in enum power_supply_property. For reasoning, see
+	 * Documentation/power/power_supply_class.rst.
+	 */
+
+	if (!fwnode_property_read_string(fwnode, "device-chemistry", &value)) {
+		if (!strcmp("nickel-cadmium", value))
+			info->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
+		else if (!strcmp("nickel-metal-hydride", value))
+			info->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
+		else if (!strcmp("lithium-ion", value))
+			/* Imprecise lithium-ion type */
+			info->technology = POWER_SUPPLY_TECHNOLOGY_LION;
+		else if (!strcmp("lithium-ion-polymer", value))
+			info->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
+		else if (!strcmp("lithium-ion-iron-phosphate", value))
+			info->technology = POWER_SUPPLY_TECHNOLOGY_LiFe;
+		else if (!strcmp("lithium-ion-manganese-oxide", value))
+			info->technology = POWER_SUPPLY_TECHNOLOGY_LiMn;
+		else
+			dev_warn(&psy->dev, "%s unknown battery type\n", value);
+	}
+
+	fwnode_property_read_u32(fwnode, "energy-full-design-microwatt-hours",
+			     &info->energy_full_design_uwh);
+	fwnode_property_read_u32(fwnode, "charge-full-design-microamp-hours",
+			     &info->charge_full_design_uah);
+	fwnode_property_read_u32(fwnode, "voltage-min-design-microvolt",
+			     &info->voltage_min_design_uv);
+	fwnode_property_read_u32(fwnode, "voltage-max-design-microvolt",
+			     &info->voltage_max_design_uv);
+	fwnode_property_read_u32(fwnode, "trickle-charge-current-microamp",
+			     &info->tricklecharge_current_ua);
+	fwnode_property_read_u32(fwnode, "precharge-current-microamp",
+			     &info->precharge_current_ua);
+	fwnode_property_read_u32(fwnode, "precharge-upper-limit-microvolt",
+			     &info->precharge_voltage_max_uv);
+	fwnode_property_read_u32(fwnode, "charge-term-current-microamp",
+			     &info->charge_term_current_ua);
+	fwnode_property_read_u32(fwnode, "re-charge-voltage-microvolt",
+			     &info->charge_restart_voltage_uv);
+	fwnode_property_read_u32(fwnode, "over-voltage-threshold-microvolt",
+			     &info->overvoltage_limit_uv);
+	fwnode_property_read_u32(fwnode, "constant-charge-current-max-microamp",
+			     &info->constant_charge_current_max_ua);
+	fwnode_property_read_u32(fwnode, "constant-charge-voltage-max-microvolt",
+			     &info->constant_charge_voltage_max_uv);
+	fwnode_property_read_u32(fwnode, "factory-internal-resistance-micro-ohms",
+			     &info->factory_internal_resistance_uohm);
+
+	if (!fwnode_property_read_u32_array(fwnode, "ambient-celsius",
+					    min_max, ARRAY_SIZE(min_max))) {
+		info->temp_ambient_alert_min = min_max[0];
+		info->temp_ambient_alert_max = min_max[1];
+	}
+	if (!fwnode_property_read_u32_array(fwnode, "alert-celsius",
+					    min_max, ARRAY_SIZE(min_max))) {
+		info->temp_alert_min = min_max[0];
+		info->temp_alert_max = min_max[1];
+	}
+	if (!fwnode_property_read_u32_array(fwnode, "operating-range-celsius",
+					    min_max, ARRAY_SIZE(min_max))) {
+		info->temp_min = min_max[0];
+		info->temp_max = min_max[1];
+	}
+
+	/*
+	 * The below code uses raw of-data parsing to parse
+	 * /schemas/types.yaml#/definitions/uint32-matrix
+	 * data, so for now this is only support with of.
+	 */
+	if (!battery_np)
+		goto out_ret_pointer;
+
+	len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius");
+	if (len < 0 && len != -EINVAL) {
+		err = len;
+		goto out_put_node;
+	} else if (len > POWER_SUPPLY_OCV_TEMP_MAX) {
+		dev_err(&psy->dev, "Too many temperature values\n");
+		err = -EINVAL;
+		goto out_put_node;
+	} else if (len > 0) {
+		of_property_read_u32_array(battery_np, "ocv-capacity-celsius",
+					   info->ocv_temp, len);
+	}
+
+	for (index = 0; index < len; index++) {
+		struct power_supply_battery_ocv_table *table;
+		char *propname;
+		int i, tab_len, size;
+
+		propname = kasprintf(GFP_KERNEL, "ocv-capacity-table-%d", index);
+		if (!propname) {
+			power_supply_put_battery_info(psy, info);
+			err = -ENOMEM;
+			goto out_put_node;
+		}
+		list = of_get_property(battery_np, propname, &size);
+		if (!list || !size) {
+			dev_err(&psy->dev, "failed to get %s\n", propname);
+			kfree(propname);
+			power_supply_put_battery_info(psy, info);
+			err = -EINVAL;
+			goto out_put_node;
+		}
+
+		kfree(propname);
+		tab_len = size / (2 * sizeof(__be32));
+		info->ocv_table_size[index] = tab_len;
+
+		table = info->ocv_table[index] =
+			devm_kcalloc(&psy->dev, tab_len, sizeof(*table), GFP_KERNEL);
+		if (!info->ocv_table[index]) {
+			power_supply_put_battery_info(psy, info);
+			err = -ENOMEM;
+			goto out_put_node;
+		}
+
+		for (i = 0; i < tab_len; i++) {
+			table[i].ocv = be32_to_cpu(*list);
+			list++;
+			table[i].capacity = be32_to_cpu(*list);
+			list++;
+		}
+	}
+
+	list = of_get_property(battery_np, "resistance-temp-table", &len);
+	if (!list || !len)
+		goto out_ret_pointer;
+
+	info->resist_table_size = len / (2 * sizeof(__be32));
+	resist_table = info->resist_table = devm_kcalloc(&psy->dev,
+							 info->resist_table_size,
+							 sizeof(*resist_table),
+							 GFP_KERNEL);
+	if (!info->resist_table) {
+		power_supply_put_battery_info(psy, info);
+		err = -ENOMEM;
+		goto out_put_node;
+	}
+
+	for (index = 0; index < info->resist_table_size; index++) {
+		resist_table[index].temp = be32_to_cpu(*list++);
+		resist_table[index].resistance = be32_to_cpu(*list++);
+	}
+
+out_ret_pointer:
+	/* Finally return the whole thing */
+	*info_out = info;
+
+out_put_node:
+	fwnode_handle_put(fwnode);
+	of_node_put(battery_np);
+	return err;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_battery_info);
+
+void power_supply_put_battery_info(struct power_supply *psy,
+				   struct power_supply_battery_info *info)
+{
+	int i;
+
+	for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++) {
+		if (info->ocv_table[i])
+			devm_kfree(&psy->dev, info->ocv_table[i]);
+	}
+
+	if (info->resist_table)
+		devm_kfree(&psy->dev, info->resist_table);
+
+	devm_kfree(&psy->dev, info);
+}
+EXPORT_SYMBOL_GPL(power_supply_put_battery_info);
+
+/**
+ * power_supply_temp2resist_simple() - find the battery internal resistance
+ * percent from temperature
+ * @table: Pointer to battery resistance temperature table
+ * @table_len: The table length
+ * @temp: Current temperature
+ *
+ * This helper function is used to look up battery internal resistance percent
+ * according to current temperature value from the resistance temperature table,
+ * and the table must be ordered descending. Then the actual battery internal
+ * resistance = the ideal battery internal resistance * percent / 100.
+ *
+ * Return: the battery internal resistance percent
+ */
+int power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table,
+				    int table_len, int temp)
+{
+	int i, high, low;
+
+	for (i = 0; i < table_len; i++)
+		if (temp > table[i].temp)
+			break;
+
+	/* The library function will deal with high == low */
+	if (i == 0)
+		high = low = i;
+	else if (i == table_len)
+		high = low = i - 1;
+	else
+		high = (low = i) - 1;
+
+	return fixp_linear_interpolate(table[low].temp,
+				       table[low].resistance,
+				       table[high].temp,
+				       table[high].resistance,
+				       temp);
+}
+EXPORT_SYMBOL_GPL(power_supply_temp2resist_simple);
+
+/**
+ * power_supply_vbat2ri() - find the battery internal resistance
+ * from the battery voltage
+ * @info: The battery information container
+ * @table: Pointer to battery resistance temperature table
+ * @vbat_uv: The battery voltage in microvolt
+ * @charging: If we are charging (true) or not (false)
+ *
+ * This helper function is used to look up battery internal resistance
+ * according to current battery voltage. Depending on whether the battery
+ * is currently charging or not, different resistance will be returned.
+ *
+ * Returns the internal resistance in microohm or negative error code.
+ */
+int power_supply_vbat2ri(struct power_supply_battery_info *info,
+			 int vbat_uv, bool charging)
+{
+	struct power_supply_vbat_ri_table *vbat2ri;
+	int table_len;
+	int i, high, low;
+
+	/*
+	 * If we are charging, and the battery supplies a separate table
+	 * for this state, we use that in order to compensate for the
+	 * charging voltage. Otherwise we use the main table.
+	 */
+	if (charging && info->vbat2ri_charging) {
+		vbat2ri = info->vbat2ri_charging;
+		table_len = info->vbat2ri_charging_size;
+	} else {
+		vbat2ri = info->vbat2ri_discharging;
+		table_len = info->vbat2ri_discharging_size;
+	}
+
+	/*
+	 * If no tables are specified, or if we are above the highest voltage in
+	 * the voltage table, just return the factory specified internal resistance.
+	 */
+	if (!vbat2ri || (table_len <= 0) || (vbat_uv > vbat2ri[0].vbat_uv)) {
+		if (charging && (info->factory_internal_resistance_charging_uohm > 0))
+			return info->factory_internal_resistance_charging_uohm;
+		else
+			return info->factory_internal_resistance_uohm;
+	}
+
+	/* Break loop at table_len - 1 because that is the highest index */
+	for (i = 0; i < table_len - 1; i++)
+		if (vbat_uv > vbat2ri[i].vbat_uv)
+			break;
+
+	/* The library function will deal with high == low */
+	if ((i == 0) || (i == (table_len - 1)))
+		high = i;
+	else
+		high = i - 1;
+	low = i;
+
+	return fixp_linear_interpolate(vbat2ri[low].vbat_uv,
+				       vbat2ri[low].ri_uohm,
+				       vbat2ri[high].vbat_uv,
+				       vbat2ri[high].ri_uohm,
+				       vbat_uv);
+}
+EXPORT_SYMBOL_GPL(power_supply_vbat2ri);
+
+struct power_supply_maintenance_charge_table *
+power_supply_get_maintenance_charging_setting(struct power_supply_battery_info *info,
+					      int index)
+{
+	if (index >= info->maintenance_charge_size)
+		return NULL;
+	return &info->maintenance_charge[index];
+}
+EXPORT_SYMBOL_GPL(power_supply_get_maintenance_charging_setting);
+
+/**
+ * power_supply_ocv2cap_simple() - find the battery capacity
+ * @table: Pointer to battery OCV lookup table
+ * @table_len: OCV table length
+ * @ocv: Current OCV value
+ *
+ * This helper function is used to look up battery capacity according to
+ * current OCV value from one OCV table, and the OCV table must be ordered
+ * descending.
+ *
+ * Return: the battery capacity.
+ */
+int power_supply_ocv2cap_simple(struct power_supply_battery_ocv_table *table,
+				int table_len, int ocv)
+{
+	int i, high, low;
+
+	for (i = 0; i < table_len; i++)
+		if (ocv > table[i].ocv)
+			break;
+
+	/* The library function will deal with high == low */
+	if (i == 0)
+		high = low = i;
+	else if (i == table_len)
+		high = low = i - 1;
+	else
+		high = (low = i) - 1;
+
+	return fixp_linear_interpolate(table[low].ocv,
+				       table[low].capacity,
+				       table[high].ocv,
+				       table[high].capacity,
+				       ocv);
+}
+EXPORT_SYMBOL_GPL(power_supply_ocv2cap_simple);
+
+struct power_supply_battery_ocv_table *
+power_supply_find_ocv2cap_table(struct power_supply_battery_info *info,
+				int temp, int *table_len)
+{
+	int best_temp_diff = INT_MAX, temp_diff;
+	u8 i, best_index = 0;
+
+	if (!info->ocv_table[0])
+		return NULL;
+
+	for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++) {
+		/* Out of capacity tables */
+		if (!info->ocv_table[i])
+			break;
+
+		temp_diff = abs(info->ocv_temp[i] - temp);
+
+		if (temp_diff < best_temp_diff) {
+			best_temp_diff = temp_diff;
+			best_index = i;
+		}
+	}
+
+	*table_len = info->ocv_table_size[best_index];
+	return info->ocv_table[best_index];
+}
+EXPORT_SYMBOL_GPL(power_supply_find_ocv2cap_table);
+
+int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info,
+				 int ocv, int temp)
+{
+	struct power_supply_battery_ocv_table *table;
+	int table_len;
+
+	table = power_supply_find_ocv2cap_table(info, temp, &table_len);
+	if (!table)
+		return -EINVAL;
+
+	return power_supply_ocv2cap_simple(table, table_len, ocv);
+}
+EXPORT_SYMBOL_GPL(power_supply_batinfo_ocv2cap);
+
+bool power_supply_battery_bti_in_range(struct power_supply_battery_info *info,
+				       int resistance)
+{
+	int low, high;
+
+	/* Nothing like this can be checked */
+	if (info->bti_resistance_ohm <= 0)
+		return false;
+
+	/* This will be extremely strict and unlikely to work */
+	if (info->bti_resistance_tolerance <= 0)
+		return (info->bti_resistance_ohm == resistance);
+
+	low = info->bti_resistance_ohm -
+		(info->bti_resistance_ohm * info->bti_resistance_tolerance) / 100;
+	high = info->bti_resistance_ohm +
+		(info->bti_resistance_ohm * info->bti_resistance_tolerance) / 100;
+
+	return ((resistance >= low) && (resistance <= high));
+}
+EXPORT_SYMBOL_GPL(power_supply_battery_bti_in_range);
+
+int power_supply_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	if (atomic_read(&psy->use_cnt) <= 0) {
+		if (!psy->initialized)
+			return -EAGAIN;
+		return -ENODEV;
+	}
+
+	return psy->desc->get_property(psy, psp, val);
+}
+EXPORT_SYMBOL_GPL(power_supply_get_property);
+
+int power_supply_set_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    const union power_supply_propval *val)
+{
+	if (atomic_read(&psy->use_cnt) <= 0 || !psy->desc->set_property)
+		return -ENODEV;
+
+	return psy->desc->set_property(psy, psp, val);
+}
+EXPORT_SYMBOL_GPL(power_supply_set_property);
+
+int power_supply_property_is_writeable(struct power_supply *psy,
+					enum power_supply_property psp)
+{
+	if (atomic_read(&psy->use_cnt) <= 0 ||
+			!psy->desc->property_is_writeable)
+		return -ENODEV;
+
+	return psy->desc->property_is_writeable(psy, psp);
+}
+EXPORT_SYMBOL_GPL(power_supply_property_is_writeable);
+
+void power_supply_external_power_changed(struct power_supply *psy)
+{
+	if (atomic_read(&psy->use_cnt) <= 0 ||
+			!psy->desc->external_power_changed)
+		return;
+
+	psy->desc->external_power_changed(psy);
+}
+EXPORT_SYMBOL_GPL(power_supply_external_power_changed);
+
+int power_supply_powers(struct power_supply *psy, struct device *dev)
+{
+	return sysfs_create_link(&psy->dev.kobj, &dev->kobj, "powers");
+}
+EXPORT_SYMBOL_GPL(power_supply_powers);
+
+static void power_supply_dev_release(struct device *dev)
+{
+	struct power_supply *psy = to_power_supply(dev);
+	dev_dbg(dev, "%s\n", __func__);
+	kfree(psy);
+}
+
+int power_supply_reg_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&power_supply_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(power_supply_reg_notifier);
+
+void power_supply_unreg_notifier(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&power_supply_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(power_supply_unreg_notifier);
+
+static bool psy_has_property(const struct power_supply_desc *psy_desc,
+			     enum power_supply_property psp)
+{
+	bool found = false;
+	int i;
+
+	for (i = 0; i < psy_desc->num_properties; i++) {
+		if (psy_desc->properties[i] == psp) {
+			found = true;
+			break;
+		}
+	}
+
+	return found;
+}
+
+#ifdef CONFIG_THERMAL
+static int power_supply_read_temp(struct thermal_zone_device *tzd,
+		int *temp)
+{
+	struct power_supply *psy;
+	union power_supply_propval val;
+	int ret;
+
+	WARN_ON(tzd == NULL);
+	psy = tzd->devdata;
+	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &val);
+	if (ret)
+		return ret;
+
+	/* Convert tenths of degree Celsius to milli degree Celsius. */
+	*temp = val.intval * 100;
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops psy_tzd_ops = {
+	.get_temp = power_supply_read_temp,
+};
+
+static int psy_register_thermal(struct power_supply *psy)
+{
+	int ret;
+
+	if (psy->desc->no_thermal)
+		return 0;
+
+	/* Register battery zone device psy reports temperature */
+	if (psy_has_property(psy->desc, POWER_SUPPLY_PROP_TEMP)) {
+		psy->tzd = thermal_zone_device_register(psy->desc->name,
+				0, 0, psy, &psy_tzd_ops, NULL, 0, 0);
+		if (IS_ERR(psy->tzd))
+			return PTR_ERR(psy->tzd);
+		ret = thermal_zone_device_enable(psy->tzd);
+		if (ret)
+			thermal_zone_device_unregister(psy->tzd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void psy_unregister_thermal(struct power_supply *psy)
+{
+	if (IS_ERR_OR_NULL(psy->tzd))
+		return;
+	thermal_zone_device_unregister(psy->tzd);
+}
+
+#else
+static int psy_register_thermal(struct power_supply *psy)
+{
+	return 0;
+}
+
+static void psy_unregister_thermal(struct power_supply *psy)
+{
+}
+#endif
+
+static struct power_supply *__must_check
+__power_supply_register(struct device *parent,
+				   const struct power_supply_desc *desc,
+				   const struct power_supply_config *cfg,
+				   bool ws)
+{
+	struct device *dev;
+	struct power_supply *psy;
+	int rc;
+
+	if (!parent)
+		pr_warn("%s: Expected proper parent device for '%s'\n",
+			__func__, desc->name);
+
+	if (!desc || !desc->name || !desc->properties || !desc->num_properties)
+		return ERR_PTR(-EINVAL);
+
+	if (psy_has_property(desc, POWER_SUPPLY_PROP_USB_TYPE) &&
+	    (!desc->usb_types || !desc->num_usb_types))
+		return ERR_PTR(-EINVAL);
+
+	psy = kzalloc(sizeof(*psy), GFP_KERNEL);
+	if (!psy)
+		return ERR_PTR(-ENOMEM);
+
+	dev = &psy->dev;
+
+	device_initialize(dev);
+
+	dev->class = power_supply_class;
+	dev->type = &power_supply_dev_type;
+	dev->parent = parent;
+	dev->release = power_supply_dev_release;
+	dev_set_drvdata(dev, psy);
+	psy->desc = desc;
+	if (cfg) {
+		dev->groups = cfg->attr_grp;
+		psy->drv_data = cfg->drv_data;
+		psy->of_node =
+			cfg->fwnode ? to_of_node(cfg->fwnode) : cfg->of_node;
+		psy->supplied_to = cfg->supplied_to;
+		psy->num_supplicants = cfg->num_supplicants;
+	}
+
+	rc = dev_set_name(dev, "%s", desc->name);
+	if (rc)
+		goto dev_set_name_failed;
+
+	INIT_WORK(&psy->changed_work, power_supply_changed_work);
+	INIT_DELAYED_WORK(&psy->deferred_register_work,
+			  power_supply_deferred_register_work);
+
+	rc = power_supply_check_supplies(psy);
+	if (rc) {
+		dev_dbg(dev, "Not all required supplies found, defer probe\n");
+		goto check_supplies_failed;
+	}
+
+	spin_lock_init(&psy->changed_lock);
+	rc = device_add(dev);
+	if (rc)
+		goto device_add_failed;
+
+	rc = device_init_wakeup(dev, ws);
+	if (rc)
+		goto wakeup_init_failed;
+
+	rc = psy_register_thermal(psy);
+	if (rc)
+		goto register_thermal_failed;
+
+	rc = power_supply_create_triggers(psy);
+	if (rc)
+		goto create_triggers_failed;
+
+	rc = power_supply_add_hwmon_sysfs(psy);
+	if (rc)
+		goto add_hwmon_sysfs_failed;
+
+	/*
+	 * Update use_cnt after any uevents (most notably from device_add()).
+	 * We are here still during driver's probe but
+	 * the power_supply_uevent() calls back driver's get_property
+	 * method so:
+	 * 1. Driver did not assigned the returned struct power_supply,
+	 * 2. Driver could not finish initialization (anything in its probe
+	 *    after calling power_supply_register()).
+	 */
+	atomic_inc(&psy->use_cnt);
+	psy->initialized = true;
+
+	queue_delayed_work(system_power_efficient_wq,
+			   &psy->deferred_register_work,
+			   POWER_SUPPLY_DEFERRED_REGISTER_TIME);
+
+	return psy;
+
+add_hwmon_sysfs_failed:
+	power_supply_remove_triggers(psy);
+create_triggers_failed:
+	psy_unregister_thermal(psy);
+register_thermal_failed:
+wakeup_init_failed:
+	device_del(dev);
+device_add_failed:
+check_supplies_failed:
+dev_set_name_failed:
+	put_device(dev);
+	return ERR_PTR(rc);
+}
+
+/**
+ * power_supply_register() - Register new power supply
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
+ * @desc:	Description of power supply, must be valid through whole
+ *		lifetime of this power supply
+ * @cfg:	Run-time specific configuration accessed during registering,
+ *		may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * Use power_supply_unregister() on returned power_supply pointer to release
+ * resources.
+ */
+struct power_supply *__must_check power_supply_register(struct device *parent,
+		const struct power_supply_desc *desc,
+		const struct power_supply_config *cfg)
+{
+	return __power_supply_register(parent, desc, cfg, true);
+}
+EXPORT_SYMBOL_GPL(power_supply_register);
+
+/**
+ * power_supply_register_no_ws() - Register new non-waking-source power supply
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
+ * @desc:	Description of power supply, must be valid through whole
+ *		lifetime of this power supply
+ * @cfg:	Run-time specific configuration accessed during registering,
+ *		may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * Use power_supply_unregister() on returned power_supply pointer to release
+ * resources.
+ */
+struct power_supply *__must_check
+power_supply_register_no_ws(struct device *parent,
+		const struct power_supply_desc *desc,
+		const struct power_supply_config *cfg)
+{
+	return __power_supply_register(parent, desc, cfg, false);
+}
+EXPORT_SYMBOL_GPL(power_supply_register_no_ws);
+
+static void devm_power_supply_release(struct device *dev, void *res)
+{
+	struct power_supply **psy = res;
+
+	power_supply_unregister(*psy);
+}
+
+/**
+ * devm_power_supply_register() - Register managed power supply
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
+ * @desc:	Description of power supply, must be valid through whole
+ *		lifetime of this power supply
+ * @cfg:	Run-time specific configuration accessed during registering,
+ *		may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * The returned power_supply pointer will be automatically unregistered
+ * on driver detach.
+ */
+struct power_supply *__must_check
+devm_power_supply_register(struct device *parent,
+		const struct power_supply_desc *desc,
+		const struct power_supply_config *cfg)
+{
+	struct power_supply **ptr, *psy;
+
+	ptr = devres_alloc(devm_power_supply_release, sizeof(*ptr), GFP_KERNEL);
+
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+	psy = __power_supply_register(parent, desc, cfg, true);
+	if (IS_ERR(psy)) {
+		devres_free(ptr);
+	} else {
+		*ptr = psy;
+		devres_add(parent, ptr);
+	}
+	return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_register);
+
+/**
+ * devm_power_supply_register_no_ws() - Register managed non-waking-source power supply
+ * @parent:	Device to be a parent of power supply's device, usually
+ *		the device which probe function calls this
+ * @desc:	Description of power supply, must be valid through whole
+ *		lifetime of this power supply
+ * @cfg:	Run-time specific configuration accessed during registering,
+ *		may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * The returned power_supply pointer will be automatically unregistered
+ * on driver detach.
+ */
+struct power_supply *__must_check
+devm_power_supply_register_no_ws(struct device *parent,
+		const struct power_supply_desc *desc,
+		const struct power_supply_config *cfg)
+{
+	struct power_supply **ptr, *psy;
+
+	ptr = devres_alloc(devm_power_supply_release, sizeof(*ptr), GFP_KERNEL);
+
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+	psy = __power_supply_register(parent, desc, cfg, false);
+	if (IS_ERR(psy)) {
+		devres_free(ptr);
+	} else {
+		*ptr = psy;
+		devres_add(parent, ptr);
+	}
+	return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
+
+/**
+ * power_supply_unregister() - Remove this power supply from system
+ * @psy:	Pointer to power supply to unregister
+ *
+ * Remove this power supply from the system. The resources of power supply
+ * will be freed here or on last power_supply_put() call.
+ */
+void power_supply_unregister(struct power_supply *psy)
+{
+	WARN_ON(atomic_dec_return(&psy->use_cnt));
+	psy->removing = true;
+	cancel_work_sync(&psy->changed_work);
+	cancel_delayed_work_sync(&psy->deferred_register_work);
+	sysfs_remove_link(&psy->dev.kobj, "powers");
+	power_supply_remove_hwmon_sysfs(psy);
+	power_supply_remove_triggers(psy);
+	psy_unregister_thermal(psy);
+	device_init_wakeup(&psy->dev, false);
+	device_unregister(&psy->dev);
+}
+EXPORT_SYMBOL_GPL(power_supply_unregister);
+
+void *power_supply_get_drvdata(struct power_supply *psy)
+{
+	return psy->drv_data;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_drvdata);
+
+static int __init power_supply_class_init(void)
+{
+	power_supply_class = class_create(THIS_MODULE, "power_supply");
+
+	if (IS_ERR(power_supply_class))
+		return PTR_ERR(power_supply_class);
+
+	power_supply_class->dev_uevent = power_supply_uevent;
+	power_supply_init_attrs(&power_supply_dev_type);
+
+	return 0;
+}
+
+static void __exit power_supply_class_exit(void)
+{
+	class_destroy(power_supply_class);
+}
+
+subsys_initcall(power_supply_class_init);
+module_exit(power_supply_class_exit);
+
+MODULE_DESCRIPTION("Universal power supply monitor class");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>, "
+	      "Szabolcs Gyurko, "
+	      "Anton Vorontsov <cbou@mail.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c
new file mode 100644
index 000000000..a48aa4afb
--- /dev/null
+++ b/drivers/power/supply/power_supply_hwmon.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  power_supply_hwmon.c - power supply hwmon support.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+struct power_supply_hwmon {
+	struct power_supply *psy;
+	unsigned long *props;
+};
+
+static const char *const ps_temp_label[] = {
+	"temp",
+	"ambient temp",
+};
+
+static int power_supply_hwmon_in_to_property(u32 attr)
+{
+	switch (attr) {
+	case hwmon_in_average:
+		return POWER_SUPPLY_PROP_VOLTAGE_AVG;
+	case hwmon_in_min:
+		return POWER_SUPPLY_PROP_VOLTAGE_MIN;
+	case hwmon_in_max:
+		return POWER_SUPPLY_PROP_VOLTAGE_MAX;
+	case hwmon_in_input:
+		return POWER_SUPPLY_PROP_VOLTAGE_NOW;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int power_supply_hwmon_curr_to_property(u32 attr)
+{
+	switch (attr) {
+	case hwmon_curr_average:
+		return POWER_SUPPLY_PROP_CURRENT_AVG;
+	case hwmon_curr_max:
+		return POWER_SUPPLY_PROP_CURRENT_MAX;
+	case hwmon_curr_input:
+		return POWER_SUPPLY_PROP_CURRENT_NOW;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int power_supply_hwmon_temp_to_property(u32 attr, int channel)
+{
+	if (channel) {
+		switch (attr) {
+		case hwmon_temp_input:
+			return POWER_SUPPLY_PROP_TEMP_AMBIENT;
+		case hwmon_temp_min_alarm:
+			return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN;
+		case hwmon_temp_max_alarm:
+			return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX;
+		default:
+			break;
+		}
+	} else {
+		switch (attr) {
+		case hwmon_temp_input:
+			return POWER_SUPPLY_PROP_TEMP;
+		case hwmon_temp_max:
+			return POWER_SUPPLY_PROP_TEMP_MAX;
+		case hwmon_temp_min:
+			return POWER_SUPPLY_PROP_TEMP_MIN;
+		case hwmon_temp_min_alarm:
+			return POWER_SUPPLY_PROP_TEMP_ALERT_MIN;
+		case hwmon_temp_max_alarm:
+			return POWER_SUPPLY_PROP_TEMP_ALERT_MAX;
+		default:
+			break;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int
+power_supply_hwmon_to_property(enum hwmon_sensor_types type,
+			       u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_in:
+		return power_supply_hwmon_in_to_property(attr);
+	case hwmon_curr:
+		return power_supply_hwmon_curr_to_property(attr);
+	case hwmon_temp:
+		return power_supply_hwmon_temp_to_property(attr, channel);
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type,
+					   u32 attr)
+{
+	return type == hwmon_temp && attr == hwmon_temp_label;
+}
+
+struct hwmon_type_attr_list {
+	const u32 *attrs;
+	size_t n_attrs;
+};
+
+static const u32 ps_temp_attrs[] = {
+	hwmon_temp_input,
+	hwmon_temp_min, hwmon_temp_max,
+	hwmon_temp_min_alarm, hwmon_temp_max_alarm,
+};
+
+static const struct hwmon_type_attr_list ps_type_attrs[hwmon_max] = {
+	[hwmon_temp] = { ps_temp_attrs, ARRAY_SIZE(ps_temp_attrs) },
+};
+
+static bool power_supply_hwmon_has_input(
+	const struct power_supply_hwmon *psyhw,
+	enum hwmon_sensor_types type, int channel)
+{
+	const struct hwmon_type_attr_list *attr_list = &ps_type_attrs[type];
+	size_t i;
+
+	for (i = 0; i < attr_list->n_attrs; ++i) {
+		int prop = power_supply_hwmon_to_property(type,
+			attr_list->attrs[i], channel);
+
+		if (prop >= 0 && test_bit(prop, psyhw->props))
+			return true;
+	}
+
+	return false;
+}
+
+static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type,
+					   u32 attr)
+{
+	switch (type) {
+	case hwmon_in:
+		return attr == hwmon_in_min ||
+		       attr == hwmon_in_max;
+	case hwmon_curr:
+		return attr == hwmon_curr_max;
+	case hwmon_temp:
+		return attr == hwmon_temp_max ||
+		       attr == hwmon_temp_min ||
+		       attr == hwmon_temp_min_alarm ||
+		       attr == hwmon_temp_max_alarm;
+	default:
+		return false;
+	}
+}
+
+static umode_t power_supply_hwmon_is_visible(const void *data,
+					     enum hwmon_sensor_types type,
+					     u32 attr, int channel)
+{
+	const struct power_supply_hwmon *psyhw = data;
+	int prop;
+
+	if (power_supply_hwmon_is_a_label(type, attr)) {
+		if (power_supply_hwmon_has_input(psyhw, type, channel))
+			return 0444;
+		else
+			return 0;
+	}
+
+	prop = power_supply_hwmon_to_property(type, attr, channel);
+	if (prop < 0 || !test_bit(prop, psyhw->props))
+		return 0;
+
+	if (power_supply_property_is_writeable(psyhw->psy, prop) > 0 &&
+	    power_supply_hwmon_is_writable(type, attr))
+		return 0644;
+
+	return 0444;
+}
+
+static int power_supply_hwmon_read_string(struct device *dev,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel,
+					  const char **str)
+{
+	switch (type) {
+	case hwmon_temp:
+		*str = ps_temp_label[channel];
+		break;
+	default:
+		/* unreachable, but see:
+		 * gcc bug #51513 [1] and clang bug #978 [2]
+		 *
+		 * [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51513
+		 * [2] https://github.com/ClangBuiltLinux/linux/issues/978
+		 */
+		break;
+	}
+
+	return 0;
+}
+
+static int
+power_supply_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct power_supply_hwmon *psyhw = dev_get_drvdata(dev);
+	struct power_supply *psy = psyhw->psy;
+	union power_supply_propval pspval;
+	int ret, prop;
+
+	prop = power_supply_hwmon_to_property(type, attr, channel);
+	if (prop < 0)
+		return prop;
+
+	ret  = power_supply_get_property(psy, prop, &pspval);
+	if (ret)
+		return ret;
+
+	switch (type) {
+	/*
+	 * Both voltage and current is reported in units of
+	 * microvolts/microamps, so we need to adjust it to
+	 * milliamps(volts)
+	 */
+	case hwmon_curr:
+	case hwmon_in:
+		pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 1000);
+		break;
+	/*
+	 * Temp needs to be converted from 1/10 C to milli-C
+	 */
+	case hwmon_temp:
+		if (check_mul_overflow(pspval.intval, 100,
+				       &pspval.intval))
+			return -EOVERFLOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*val = pspval.intval;
+
+	return 0;
+}
+
+static int
+power_supply_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	struct power_supply_hwmon *psyhw = dev_get_drvdata(dev);
+	struct power_supply *psy = psyhw->psy;
+	union power_supply_propval pspval;
+	int prop;
+
+	prop = power_supply_hwmon_to_property(type, attr, channel);
+	if (prop < 0)
+		return prop;
+
+	pspval.intval = val;
+
+	switch (type) {
+	/*
+	 * Both voltage and current is reported in units of
+	 * microvolts/microamps, so we need to adjust it to
+	 * milliamps(volts)
+	 */
+	case hwmon_curr:
+	case hwmon_in:
+		if (check_mul_overflow(pspval.intval, 1000,
+				       &pspval.intval))
+			return -EOVERFLOW;
+		break;
+	/*
+	 * Temp needs to be converted from 1/10 C to milli-C
+	 */
+	case hwmon_temp:
+		pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 100);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return power_supply_set_property(psy, prop, &pspval);
+}
+
+static const struct hwmon_ops power_supply_hwmon_ops = {
+	.is_visible	= power_supply_hwmon_is_visible,
+	.read		= power_supply_hwmon_read,
+	.write		= power_supply_hwmon_write,
+	.read_string	= power_supply_hwmon_read_string,
+};
+
+static const struct hwmon_channel_info *power_supply_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_LABEL     |
+			   HWMON_T_INPUT     |
+			   HWMON_T_MAX       |
+			   HWMON_T_MIN       |
+			   HWMON_T_MIN_ALARM,
+
+			   HWMON_T_LABEL     |
+			   HWMON_T_INPUT     |
+			   HWMON_T_MIN_ALARM |
+			   HWMON_T_MAX_ALARM),
+
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_AVERAGE |
+			   HWMON_C_MAX     |
+			   HWMON_C_INPUT),
+
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_AVERAGE |
+			   HWMON_I_MIN     |
+			   HWMON_I_MAX     |
+			   HWMON_I_INPUT),
+	NULL
+};
+
+static const struct hwmon_chip_info power_supply_hwmon_chip_info = {
+	.ops = &power_supply_hwmon_ops,
+	.info = power_supply_hwmon_info,
+};
+
+int power_supply_add_hwmon_sysfs(struct power_supply *psy)
+{
+	const struct power_supply_desc *desc = psy->desc;
+	struct power_supply_hwmon *psyhw;
+	struct device *dev = &psy->dev;
+	struct device *hwmon;
+	int ret, i;
+	const char *name;
+
+	if (!devres_open_group(dev, power_supply_add_hwmon_sysfs,
+			       GFP_KERNEL))
+		return -ENOMEM;
+
+	psyhw = devm_kzalloc(dev, sizeof(*psyhw), GFP_KERNEL);
+	if (!psyhw) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	psyhw->psy = psy;
+	psyhw->props = devm_bitmap_zalloc(dev,
+					  POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1,
+					  GFP_KERNEL);
+	if (!psyhw->props) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	for (i = 0; i < desc->num_properties; i++) {
+		const enum power_supply_property prop = desc->properties[i];
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_CURRENT_AVG:
+		case POWER_SUPPLY_PROP_CURRENT_MAX:
+		case POWER_SUPPLY_PROP_CURRENT_NOW:
+		case POWER_SUPPLY_PROP_TEMP:
+		case POWER_SUPPLY_PROP_TEMP_MAX:
+		case POWER_SUPPLY_PROP_TEMP_MIN:
+		case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+		case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+		case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN:
+		case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX:
+		case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+			set_bit(prop, psyhw->props);
+			break;
+		default:
+			break;
+		}
+	}
+
+	name = psy->desc->name;
+	if (strchr(name, '-')) {
+		char *new_name;
+
+		new_name = devm_kstrdup(dev, name, GFP_KERNEL);
+		if (!new_name) {
+			ret = -ENOMEM;
+			goto error;
+		}
+		strreplace(new_name, '-', '_');
+		name = new_name;
+	}
+	hwmon = devm_hwmon_device_register_with_info(dev, name,
+						psyhw,
+						&power_supply_hwmon_chip_info,
+						NULL);
+	ret = PTR_ERR_OR_ZERO(hwmon);
+	if (ret)
+		goto error;
+
+	devres_close_group(dev, power_supply_add_hwmon_sysfs);
+	return 0;
+error:
+	devres_release_group(dev, NULL);
+	return ret;
+}
+
+void power_supply_remove_hwmon_sysfs(struct power_supply *psy)
+{
+	devres_release_group(&psy->dev, power_supply_add_hwmon_sysfs);
+}
diff --git a/drivers/power/supply/power_supply_leds.c b/drivers/power/supply/power_supply_leds.c
new file mode 100644
index 000000000..b7a2778f8
--- /dev/null
+++ b/drivers/power/supply/power_supply_leds.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  LEDs triggers for power supply class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include "power_supply.h"
+
+/* Battery specific LEDs triggers. */
+
+static void power_supply_update_bat_leds(struct power_supply *psy)
+{
+	union power_supply_propval status;
+	unsigned long delay_on = 0;
+	unsigned long delay_off = 0;
+
+	if (power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, &status))
+		return;
+
+	dev_dbg(&psy->dev, "%s %d\n", __func__, status.intval);
+
+	switch (status.intval) {
+	case POWER_SUPPLY_STATUS_FULL:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_FULL);
+		/* Going from blink to LED on requires a LED_OFF event to stop blink */
+		led_trigger_event(psy->charging_blink_full_solid_trig, LED_OFF);
+		led_trigger_event(psy->charging_blink_full_solid_trig, LED_FULL);
+		break;
+	case POWER_SUPPLY_STATUS_CHARGING:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_FULL);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		led_trigger_blink(psy->charging_blink_full_solid_trig,
+			&delay_on, &delay_off);
+		break;
+	default:
+		led_trigger_event(psy->charging_full_trig, LED_OFF);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		led_trigger_event(psy->charging_blink_full_solid_trig,
+			LED_OFF);
+		break;
+	}
+}
+
+static int power_supply_create_bat_triggers(struct power_supply *psy)
+{
+	psy->charging_full_trig_name = kasprintf(GFP_KERNEL,
+					"%s-charging-or-full", psy->desc->name);
+	if (!psy->charging_full_trig_name)
+		goto charging_full_failed;
+
+	psy->charging_trig_name = kasprintf(GFP_KERNEL,
+					"%s-charging", psy->desc->name);
+	if (!psy->charging_trig_name)
+		goto charging_failed;
+
+	psy->full_trig_name = kasprintf(GFP_KERNEL, "%s-full", psy->desc->name);
+	if (!psy->full_trig_name)
+		goto full_failed;
+
+	psy->charging_blink_full_solid_trig_name = kasprintf(GFP_KERNEL,
+		"%s-charging-blink-full-solid", psy->desc->name);
+	if (!psy->charging_blink_full_solid_trig_name)
+		goto charging_blink_full_solid_failed;
+
+	led_trigger_register_simple(psy->charging_full_trig_name,
+				    &psy->charging_full_trig);
+	led_trigger_register_simple(psy->charging_trig_name,
+				    &psy->charging_trig);
+	led_trigger_register_simple(psy->full_trig_name,
+				    &psy->full_trig);
+	led_trigger_register_simple(psy->charging_blink_full_solid_trig_name,
+				    &psy->charging_blink_full_solid_trig);
+
+	return 0;
+
+charging_blink_full_solid_failed:
+	kfree(psy->full_trig_name);
+full_failed:
+	kfree(psy->charging_trig_name);
+charging_failed:
+	kfree(psy->charging_full_trig_name);
+charging_full_failed:
+	return -ENOMEM;
+}
+
+static void power_supply_remove_bat_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->charging_full_trig);
+	led_trigger_unregister_simple(psy->charging_trig);
+	led_trigger_unregister_simple(psy->full_trig);
+	led_trigger_unregister_simple(psy->charging_blink_full_solid_trig);
+	kfree(psy->charging_blink_full_solid_trig_name);
+	kfree(psy->full_trig_name);
+	kfree(psy->charging_trig_name);
+	kfree(psy->charging_full_trig_name);
+}
+
+/* Generated power specific LEDs triggers. */
+
+static void power_supply_update_gen_leds(struct power_supply *psy)
+{
+	union power_supply_propval online;
+
+	if (power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE, &online))
+		return;
+
+	dev_dbg(&psy->dev, "%s %d\n", __func__, online.intval);
+
+	if (online.intval)
+		led_trigger_event(psy->online_trig, LED_FULL);
+	else
+		led_trigger_event(psy->online_trig, LED_OFF);
+}
+
+static int power_supply_create_gen_triggers(struct power_supply *psy)
+{
+	psy->online_trig_name = kasprintf(GFP_KERNEL, "%s-online",
+					  psy->desc->name);
+	if (!psy->online_trig_name)
+		return -ENOMEM;
+
+	led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
+
+	return 0;
+}
+
+static void power_supply_remove_gen_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->online_trig);
+	kfree(psy->online_trig_name);
+}
+
+/* Choice what triggers to create&update. */
+
+void power_supply_update_leds(struct power_supply *psy)
+{
+	if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_update_bat_leds(psy);
+	else
+		power_supply_update_gen_leds(psy);
+}
+
+int power_supply_create_triggers(struct power_supply *psy)
+{
+	if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+		return power_supply_create_bat_triggers(psy);
+	return power_supply_create_gen_triggers(psy);
+}
+
+void power_supply_remove_triggers(struct power_supply *psy)
+{
+	if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_remove_bat_triggers(psy);
+	else
+		power_supply_remove_gen_triggers(psy);
+}
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
new file mode 100644
index 000000000..7abd916d0
--- /dev/null
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Sysfs interface for the universal power supply monitor class
+ *
+ *  Copyright © 2007  David Woodhouse <dwmw2@infradead.org>
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ */
+
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+
+#include "power_supply.h"
+
+#define MAX_PROP_NAME_LEN 30
+
+struct power_supply_attr {
+	const char *prop_name;
+	char attr_name[MAX_PROP_NAME_LEN + 1];
+	struct device_attribute dev_attr;
+	const char * const *text_values;
+	int text_values_len;
+};
+
+#define _POWER_SUPPLY_ATTR(_name, _text, _len)	\
+[POWER_SUPPLY_PROP_ ## _name] =			\
+{						\
+	.prop_name = #_name,			\
+	.attr_name = #_name "\0",		\
+	.text_values = _text,			\
+	.text_values_len = _len,		\
+}
+
+#define POWER_SUPPLY_ATTR(_name) _POWER_SUPPLY_ATTR(_name, NULL, 0)
+#define _POWER_SUPPLY_ENUM_ATTR(_name, _text)	\
+	_POWER_SUPPLY_ATTR(_name, _text, ARRAY_SIZE(_text))
+#define POWER_SUPPLY_ENUM_ATTR(_name)	\
+	_POWER_SUPPLY_ENUM_ATTR(_name, POWER_SUPPLY_ ## _name ## _TEXT)
+
+static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
+	[POWER_SUPPLY_TYPE_UNKNOWN]		= "Unknown",
+	[POWER_SUPPLY_TYPE_BATTERY]		= "Battery",
+	[POWER_SUPPLY_TYPE_UPS]			= "UPS",
+	[POWER_SUPPLY_TYPE_MAINS]		= "Mains",
+	[POWER_SUPPLY_TYPE_USB]			= "USB",
+	[POWER_SUPPLY_TYPE_USB_DCP]		= "USB_DCP",
+	[POWER_SUPPLY_TYPE_USB_CDP]		= "USB_CDP",
+	[POWER_SUPPLY_TYPE_USB_ACA]		= "USB_ACA",
+	[POWER_SUPPLY_TYPE_USB_TYPE_C]		= "USB_C",
+	[POWER_SUPPLY_TYPE_USB_PD]		= "USB_PD",
+	[POWER_SUPPLY_TYPE_USB_PD_DRP]		= "USB_PD_DRP",
+	[POWER_SUPPLY_TYPE_APPLE_BRICK_ID]	= "BrickID",
+	[POWER_SUPPLY_TYPE_WIRELESS]		= "Wireless",
+};
+
+static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {
+	[POWER_SUPPLY_USB_TYPE_UNKNOWN]		= "Unknown",
+	[POWER_SUPPLY_USB_TYPE_SDP]		= "SDP",
+	[POWER_SUPPLY_USB_TYPE_DCP]		= "DCP",
+	[POWER_SUPPLY_USB_TYPE_CDP]		= "CDP",
+	[POWER_SUPPLY_USB_TYPE_ACA]		= "ACA",
+	[POWER_SUPPLY_USB_TYPE_C]		= "C",
+	[POWER_SUPPLY_USB_TYPE_PD]		= "PD",
+	[POWER_SUPPLY_USB_TYPE_PD_DRP]		= "PD_DRP",
+	[POWER_SUPPLY_USB_TYPE_PD_PPS]		= "PD_PPS",
+	[POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID]	= "BrickID",
+};
+
+static const char * const POWER_SUPPLY_STATUS_TEXT[] = {
+	[POWER_SUPPLY_STATUS_UNKNOWN]		= "Unknown",
+	[POWER_SUPPLY_STATUS_CHARGING]		= "Charging",
+	[POWER_SUPPLY_STATUS_DISCHARGING]	= "Discharging",
+	[POWER_SUPPLY_STATUS_NOT_CHARGING]	= "Not charging",
+	[POWER_SUPPLY_STATUS_FULL]		= "Full",
+};
+
+static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = {
+	[POWER_SUPPLY_CHARGE_TYPE_UNKNOWN]	= "Unknown",
+	[POWER_SUPPLY_CHARGE_TYPE_NONE]		= "N/A",
+	[POWER_SUPPLY_CHARGE_TYPE_TRICKLE]	= "Trickle",
+	[POWER_SUPPLY_CHARGE_TYPE_FAST]		= "Fast",
+	[POWER_SUPPLY_CHARGE_TYPE_STANDARD]	= "Standard",
+	[POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE]	= "Adaptive",
+	[POWER_SUPPLY_CHARGE_TYPE_CUSTOM]	= "Custom",
+	[POWER_SUPPLY_CHARGE_TYPE_LONGLIFE]	= "Long Life",
+	[POWER_SUPPLY_CHARGE_TYPE_BYPASS]	= "Bypass",
+};
+
+static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
+	[POWER_SUPPLY_HEALTH_UNKNOWN]		    = "Unknown",
+	[POWER_SUPPLY_HEALTH_GOOD]		    = "Good",
+	[POWER_SUPPLY_HEALTH_OVERHEAT]		    = "Overheat",
+	[POWER_SUPPLY_HEALTH_DEAD]		    = "Dead",
+	[POWER_SUPPLY_HEALTH_OVERVOLTAGE]	    = "Over voltage",
+	[POWER_SUPPLY_HEALTH_UNSPEC_FAILURE]	    = "Unspecified failure",
+	[POWER_SUPPLY_HEALTH_COLD]		    = "Cold",
+	[POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE] = "Watchdog timer expire",
+	[POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE]   = "Safety timer expire",
+	[POWER_SUPPLY_HEALTH_OVERCURRENT]	    = "Over current",
+	[POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED]  = "Calibration required",
+	[POWER_SUPPLY_HEALTH_WARM]		    = "Warm",
+	[POWER_SUPPLY_HEALTH_COOL]		    = "Cool",
+	[POWER_SUPPLY_HEALTH_HOT]		    = "Hot",
+	[POWER_SUPPLY_HEALTH_NO_BATTERY]	    = "No battery",
+};
+
+static const char * const POWER_SUPPLY_TECHNOLOGY_TEXT[] = {
+	[POWER_SUPPLY_TECHNOLOGY_UNKNOWN]	= "Unknown",
+	[POWER_SUPPLY_TECHNOLOGY_NiMH]		= "NiMH",
+	[POWER_SUPPLY_TECHNOLOGY_LION]		= "Li-ion",
+	[POWER_SUPPLY_TECHNOLOGY_LIPO]		= "Li-poly",
+	[POWER_SUPPLY_TECHNOLOGY_LiFe]		= "LiFe",
+	[POWER_SUPPLY_TECHNOLOGY_NiCd]		= "NiCd",
+	[POWER_SUPPLY_TECHNOLOGY_LiMn]		= "LiMn",
+};
+
+static const char * const POWER_SUPPLY_CAPACITY_LEVEL_TEXT[] = {
+	[POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN]	= "Unknown",
+	[POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL]	= "Critical",
+	[POWER_SUPPLY_CAPACITY_LEVEL_LOW]	= "Low",
+	[POWER_SUPPLY_CAPACITY_LEVEL_NORMAL]	= "Normal",
+	[POWER_SUPPLY_CAPACITY_LEVEL_HIGH]	= "High",
+	[POWER_SUPPLY_CAPACITY_LEVEL_FULL]	= "Full",
+};
+
+static const char * const POWER_SUPPLY_SCOPE_TEXT[] = {
+	[POWER_SUPPLY_SCOPE_UNKNOWN]	= "Unknown",
+	[POWER_SUPPLY_SCOPE_SYSTEM]	= "System",
+	[POWER_SUPPLY_SCOPE_DEVICE]	= "Device",
+};
+
+static const char * const POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[] = {
+	[POWER_SUPPLY_CHARGE_BEHAVIOUR_AUTO]		= "auto",
+	[POWER_SUPPLY_CHARGE_BEHAVIOUR_INHIBIT_CHARGE]	= "inhibit-charge",
+	[POWER_SUPPLY_CHARGE_BEHAVIOUR_FORCE_DISCHARGE]	= "force-discharge",
+};
+
+static struct power_supply_attr power_supply_attrs[] = {
+	/* Properties of type `int' */
+	POWER_SUPPLY_ENUM_ATTR(STATUS),
+	POWER_SUPPLY_ENUM_ATTR(CHARGE_TYPE),
+	POWER_SUPPLY_ENUM_ATTR(HEALTH),
+	POWER_SUPPLY_ATTR(PRESENT),
+	POWER_SUPPLY_ATTR(ONLINE),
+	POWER_SUPPLY_ATTR(AUTHENTIC),
+	POWER_SUPPLY_ENUM_ATTR(TECHNOLOGY),
+	POWER_SUPPLY_ATTR(CYCLE_COUNT),
+	POWER_SUPPLY_ATTR(VOLTAGE_MAX),
+	POWER_SUPPLY_ATTR(VOLTAGE_MIN),
+	POWER_SUPPLY_ATTR(VOLTAGE_MAX_DESIGN),
+	POWER_SUPPLY_ATTR(VOLTAGE_MIN_DESIGN),
+	POWER_SUPPLY_ATTR(VOLTAGE_NOW),
+	POWER_SUPPLY_ATTR(VOLTAGE_AVG),
+	POWER_SUPPLY_ATTR(VOLTAGE_OCV),
+	POWER_SUPPLY_ATTR(VOLTAGE_BOOT),
+	POWER_SUPPLY_ATTR(CURRENT_MAX),
+	POWER_SUPPLY_ATTR(CURRENT_NOW),
+	POWER_SUPPLY_ATTR(CURRENT_AVG),
+	POWER_SUPPLY_ATTR(CURRENT_BOOT),
+	POWER_SUPPLY_ATTR(POWER_NOW),
+	POWER_SUPPLY_ATTR(POWER_AVG),
+	POWER_SUPPLY_ATTR(CHARGE_FULL_DESIGN),
+	POWER_SUPPLY_ATTR(CHARGE_EMPTY_DESIGN),
+	POWER_SUPPLY_ATTR(CHARGE_FULL),
+	POWER_SUPPLY_ATTR(CHARGE_EMPTY),
+	POWER_SUPPLY_ATTR(CHARGE_NOW),
+	POWER_SUPPLY_ATTR(CHARGE_AVG),
+	POWER_SUPPLY_ATTR(CHARGE_COUNTER),
+	POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT),
+	POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT_MAX),
+	POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE),
+	POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE_MAX),
+	POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT),
+	POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT_MAX),
+	POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD),
+	POWER_SUPPLY_ATTR(CHARGE_CONTROL_END_THRESHOLD),
+	POWER_SUPPLY_ENUM_ATTR(CHARGE_BEHAVIOUR),
+	POWER_SUPPLY_ATTR(INPUT_CURRENT_LIMIT),
+	POWER_SUPPLY_ATTR(INPUT_VOLTAGE_LIMIT),
+	POWER_SUPPLY_ATTR(INPUT_POWER_LIMIT),
+	POWER_SUPPLY_ATTR(ENERGY_FULL_DESIGN),
+	POWER_SUPPLY_ATTR(ENERGY_EMPTY_DESIGN),
+	POWER_SUPPLY_ATTR(ENERGY_FULL),
+	POWER_SUPPLY_ATTR(ENERGY_EMPTY),
+	POWER_SUPPLY_ATTR(ENERGY_NOW),
+	POWER_SUPPLY_ATTR(ENERGY_AVG),
+	POWER_SUPPLY_ATTR(CAPACITY),
+	POWER_SUPPLY_ATTR(CAPACITY_ALERT_MIN),
+	POWER_SUPPLY_ATTR(CAPACITY_ALERT_MAX),
+	POWER_SUPPLY_ATTR(CAPACITY_ERROR_MARGIN),
+	POWER_SUPPLY_ENUM_ATTR(CAPACITY_LEVEL),
+	POWER_SUPPLY_ATTR(TEMP),
+	POWER_SUPPLY_ATTR(TEMP_MAX),
+	POWER_SUPPLY_ATTR(TEMP_MIN),
+	POWER_SUPPLY_ATTR(TEMP_ALERT_MIN),
+	POWER_SUPPLY_ATTR(TEMP_ALERT_MAX),
+	POWER_SUPPLY_ATTR(TEMP_AMBIENT),
+	POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MIN),
+	POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MAX),
+	POWER_SUPPLY_ATTR(TIME_TO_EMPTY_NOW),
+	POWER_SUPPLY_ATTR(TIME_TO_EMPTY_AVG),
+	POWER_SUPPLY_ATTR(TIME_TO_FULL_NOW),
+	POWER_SUPPLY_ATTR(TIME_TO_FULL_AVG),
+	POWER_SUPPLY_ENUM_ATTR(TYPE),
+	POWER_SUPPLY_ATTR(USB_TYPE),
+	POWER_SUPPLY_ENUM_ATTR(SCOPE),
+	POWER_SUPPLY_ATTR(PRECHARGE_CURRENT),
+	POWER_SUPPLY_ATTR(CHARGE_TERM_CURRENT),
+	POWER_SUPPLY_ATTR(CALIBRATE),
+	POWER_SUPPLY_ATTR(MANUFACTURE_YEAR),
+	POWER_SUPPLY_ATTR(MANUFACTURE_MONTH),
+	POWER_SUPPLY_ATTR(MANUFACTURE_DAY),
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_ATTR(MODEL_NAME),
+	POWER_SUPPLY_ATTR(MANUFACTURER),
+	POWER_SUPPLY_ATTR(SERIAL_NUMBER),
+};
+
+static struct attribute *
+__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1];
+
+static struct power_supply_attr *to_ps_attr(struct device_attribute *attr)
+{
+	return container_of(attr, struct power_supply_attr, dev_attr);
+}
+
+static enum power_supply_property dev_attr_psp(struct device_attribute *attr)
+{
+	return  to_ps_attr(attr) - power_supply_attrs;
+}
+
+static ssize_t power_supply_show_usb_type(struct device *dev,
+					  const struct power_supply_desc *desc,
+					  union power_supply_propval *value,
+					  char *buf)
+{
+	enum power_supply_usb_type usb_type;
+	ssize_t count = 0;
+	bool match = false;
+	int i;
+
+	for (i = 0; i < desc->num_usb_types; ++i) {
+		usb_type = desc->usb_types[i];
+
+		if (value->intval == usb_type) {
+			count += sprintf(buf + count, "[%s] ",
+					 POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
+			match = true;
+		} else {
+			count += sprintf(buf + count, "%s ",
+					 POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
+		}
+	}
+
+	if (!match) {
+		dev_warn(dev, "driver reporting unsupported connected type\n");
+		return -EINVAL;
+	}
+
+	if (count)
+		buf[count - 1] = '\n';
+
+	return count;
+}
+
+static ssize_t power_supply_show_property(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf) {
+	ssize_t ret;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct power_supply_attr *ps_attr = to_ps_attr(attr);
+	enum power_supply_property psp = dev_attr_psp(attr);
+	union power_supply_propval value;
+
+	if (psp == POWER_SUPPLY_PROP_TYPE) {
+		value.intval = psy->desc->type;
+	} else {
+		ret = power_supply_get_property(psy, psp, &value);
+
+		if (ret < 0) {
+			if (ret == -ENODATA)
+				dev_dbg_ratelimited(dev,
+					"driver has no data for `%s' property\n",
+					attr->attr.name);
+			else if (ret != -ENODEV && ret != -EAGAIN)
+				dev_err_ratelimited(dev,
+					"driver failed to report `%s' property: %zd\n",
+					attr->attr.name, ret);
+			return ret;
+		}
+	}
+
+	if (ps_attr->text_values_len > 0 &&
+	    value.intval < ps_attr->text_values_len && value.intval >= 0) {
+		return sprintf(buf, "%s\n", ps_attr->text_values[value.intval]);
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		ret = power_supply_show_usb_type(dev, psy->desc,
+						&value, buf);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME ... POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = sprintf(buf, "%s\n", value.strval);
+		break;
+	default:
+		ret = sprintf(buf, "%d\n", value.intval);
+	}
+
+	return ret;
+}
+
+static ssize_t power_supply_store_property(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count) {
+	ssize_t ret;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct power_supply_attr *ps_attr = to_ps_attr(attr);
+	enum power_supply_property psp = dev_attr_psp(attr);
+	union power_supply_propval value;
+
+	ret = -EINVAL;
+	if (ps_attr->text_values_len > 0) {
+		ret = __sysfs_match_string(ps_attr->text_values,
+					   ps_attr->text_values_len, buf);
+	}
+
+	/*
+	 * If no match was found, then check to see if it is an integer.
+	 * Integer values are valid for enums in addition to the text value.
+	 */
+	if (ret < 0) {
+		long long_val;
+
+		ret = kstrtol(buf, 10, &long_val);
+		if (ret < 0)
+			return ret;
+
+		ret = long_val;
+	}
+
+	value.intval = ret;
+
+	ret = power_supply_set_property(psy, psp, &value);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static umode_t power_supply_attr_is_visible(struct kobject *kobj,
+					   struct attribute *attr,
+					   int attrno)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct power_supply *psy = dev_get_drvdata(dev);
+	umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+	int i;
+
+	if (!power_supply_attrs[attrno].prop_name)
+		return 0;
+
+	if (attrno == POWER_SUPPLY_PROP_TYPE)
+		return mode;
+
+	for (i = 0; i < psy->desc->num_properties; i++) {
+		int property = psy->desc->properties[i];
+
+		if (property == attrno) {
+			if (psy->desc->property_is_writeable &&
+			    psy->desc->property_is_writeable(psy, property) > 0)
+				mode |= S_IWUSR;
+
+			return mode;
+		}
+	}
+
+	return 0;
+}
+
+static const struct attribute_group power_supply_attr_group = {
+	.attrs = __power_supply_attrs,
+	.is_visible = power_supply_attr_is_visible,
+};
+
+static const struct attribute_group *power_supply_attr_groups[] = {
+	&power_supply_attr_group,
+	NULL,
+};
+
+static void str_to_lower(char *str)
+{
+	while (*str) {
+		*str = tolower(*str);
+		str++;
+	}
+}
+
+void power_supply_init_attrs(struct device_type *dev_type)
+{
+	int i;
+
+	dev_type->groups = power_supply_attr_groups;
+
+	for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) {
+		struct device_attribute *attr;
+
+		if (!power_supply_attrs[i].prop_name) {
+			pr_warn("%s: Property %d skipped because it is missing from power_supply_attrs\n",
+				__func__, i);
+			sprintf(power_supply_attrs[i].attr_name, "_err_%d", i);
+		} else {
+			str_to_lower(power_supply_attrs[i].attr_name);
+		}
+
+		attr = &power_supply_attrs[i].dev_attr;
+
+		attr->attr.name = power_supply_attrs[i].attr_name;
+		attr->show = power_supply_show_property;
+		attr->store = power_supply_store_property;
+		__power_supply_attrs[i] = &attr->attr;
+	}
+}
+
+static int add_prop_uevent(struct device *dev, struct kobj_uevent_env *env,
+			   enum power_supply_property prop, char *prop_buf)
+{
+	int ret = 0;
+	struct power_supply_attr *pwr_attr;
+	struct device_attribute *dev_attr;
+	char *line;
+
+	pwr_attr = &power_supply_attrs[prop];
+	dev_attr = &pwr_attr->dev_attr;
+
+	ret = power_supply_show_property(dev, dev_attr, prop_buf);
+	if (ret == -ENODEV || ret == -ENODATA) {
+		/*
+		 * When a battery is absent, we expect -ENODEV. Don't abort;
+		 * send the uevent with at least the PRESENT=0 property
+		 */
+		return 0;
+	}
+
+	if (ret < 0)
+		return ret;
+
+	line = strchr(prop_buf, '\n');
+	if (line)
+		*line = 0;
+
+	return add_uevent_var(env, "POWER_SUPPLY_%s=%s",
+			      pwr_attr->prop_name, prop_buf);
+}
+
+int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	int ret = 0, j;
+	char *prop_buf;
+
+	if (!psy || !psy->desc) {
+		dev_dbg(dev, "No power supply yet\n");
+		return ret;
+	}
+
+	ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->desc->name);
+	if (ret)
+		return ret;
+
+	prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
+	if (!prop_buf)
+		return -ENOMEM;
+
+	ret = add_prop_uevent(dev, env, POWER_SUPPLY_PROP_TYPE, prop_buf);
+	if (ret)
+		goto out;
+
+	for (j = 0; j < psy->desc->num_properties; j++) {
+		ret = add_prop_uevent(dev, env, psy->desc->properties[j],
+				      prop_buf);
+		if (ret)
+			goto out;
+	}
+
+out:
+	free_page((unsigned long)prop_buf);
+
+	return ret;
+}
+
+ssize_t power_supply_charge_behaviour_show(struct device *dev,
+					   unsigned int available_behaviours,
+					   enum power_supply_charge_behaviour current_behaviour,
+					   char *buf)
+{
+	bool match = false, available, active;
+	ssize_t count = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT); i++) {
+		available = available_behaviours & BIT(i);
+		active = i == current_behaviour;
+
+		if (available && active) {
+			count += sysfs_emit_at(buf, count, "[%s] ",
+					       POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[i]);
+			match = true;
+		} else if (available) {
+			count += sysfs_emit_at(buf, count, "%s ",
+					       POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT[i]);
+		}
+	}
+
+	if (!match) {
+		dev_warn(dev, "driver reporting unsupported charge behaviour\n");
+		return -EINVAL;
+	}
+
+	if (count)
+		buf[count - 1] = '\n';
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(power_supply_charge_behaviour_show);
+
+int power_supply_charge_behaviour_parse(unsigned int available_behaviours, const char *buf)
+{
+	int i = sysfs_match_string(POWER_SUPPLY_CHARGE_BEHAVIOUR_TEXT, buf);
+
+	if (i < 0)
+		return i;
+
+	if (available_behaviours & BIT(i))
+		return i;
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(power_supply_charge_behaviour_parse);
diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
new file mode 100644
index 000000000..bd50124ee
--- /dev/null
+++ b/drivers/power/supply/qcom_smbb.c
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2014, Sony Mobile Communications Inc.
+ *
+ * This driver is for the multi-block Switch-Mode Battery Charger and Boost
+ * (SMBB) hardware, found in Qualcomm PM8941 PMICs.  The charger is an
+ * integrated, single-cell lithium-ion battery charger.
+ *
+ * Sub-components:
+ *  - Charger core
+ *  - Buck
+ *  - DC charge-path
+ *  - USB charge-path
+ *  - Battery interface
+ *  - Boost (not implemented)
+ *  - Misc
+ *  - HF-Buck
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+#include <linux/regulator/driver.h>
+
+#define SMBB_CHG_VMAX		0x040
+#define SMBB_CHG_VSAFE		0x041
+#define SMBB_CHG_CFG		0x043
+#define SMBB_CHG_IMAX		0x044
+#define SMBB_CHG_ISAFE		0x045
+#define SMBB_CHG_VIN_MIN	0x047
+#define SMBB_CHG_CTRL		0x049
+#define CTRL_EN			BIT(7)
+#define SMBB_CHG_VBAT_WEAK	0x052
+#define SMBB_CHG_IBAT_TERM_CHG	0x05b
+#define IBAT_TERM_CHG_IEOC	BIT(7)
+#define IBAT_TERM_CHG_IEOC_BMS	BIT(7)
+#define IBAT_TERM_CHG_IEOC_CHG	0
+#define SMBB_CHG_VBAT_DET	0x05d
+#define SMBB_CHG_TCHG_MAX_EN	0x060
+#define TCHG_MAX_EN		BIT(7)
+#define SMBB_CHG_WDOG_TIME	0x062
+#define SMBB_CHG_WDOG_EN	0x065
+#define WDOG_EN			BIT(7)
+
+#define SMBB_BUCK_REG_MODE	0x174
+#define BUCK_REG_MODE		BIT(0)
+#define BUCK_REG_MODE_VBAT	BIT(0)
+#define BUCK_REG_MODE_VSYS	0
+
+#define SMBB_BAT_PRES_STATUS	0x208
+#define PRES_STATUS_BAT_PRES	BIT(7)
+#define SMBB_BAT_TEMP_STATUS	0x209
+#define TEMP_STATUS_OK		BIT(7)
+#define TEMP_STATUS_HOT		BIT(6)
+#define SMBB_BAT_BTC_CTRL	0x249
+#define BTC_CTRL_COMP_EN	BIT(7)
+#define BTC_CTRL_COLD_EXT	BIT(1)
+#define BTC_CTRL_HOT_EXT_N	BIT(0)
+
+#define SMBB_USB_IMAX		0x344
+#define SMBB_USB_OTG_CTL	0x348
+#define OTG_CTL_EN		BIT(0)
+#define SMBB_USB_ENUM_TIMER_STOP 0x34e
+#define ENUM_TIMER_STOP		BIT(0)
+#define SMBB_USB_SEC_ACCESS	0x3d0
+#define SEC_ACCESS_MAGIC	0xa5
+#define SMBB_USB_REV_BST	0x3ed
+#define REV_BST_CHG_GONE	BIT(7)
+
+#define SMBB_DC_IMAX		0x444
+
+#define SMBB_MISC_REV2		0x601
+#define SMBB_MISC_BOOT_DONE	0x642
+#define BOOT_DONE		BIT(7)
+
+#define STATUS_USBIN_VALID	BIT(0) /* USB connection is valid */
+#define STATUS_DCIN_VALID	BIT(1) /* DC connection is valid */
+#define STATUS_BAT_HOT		BIT(2) /* Battery temp 1=Hot, 0=Cold */
+#define STATUS_BAT_OK		BIT(3) /* Battery temp OK */
+#define STATUS_BAT_PRESENT	BIT(4) /* Battery is present */
+#define STATUS_CHG_DONE		BIT(5) /* Charge cycle is complete */
+#define STATUS_CHG_TRKL		BIT(6) /* Trickle charging */
+#define STATUS_CHG_FAST		BIT(7) /* Fast charging */
+#define STATUS_CHG_GONE		BIT(8) /* No charger is connected */
+
+enum smbb_attr {
+	ATTR_BAT_ISAFE,
+	ATTR_BAT_IMAX,
+	ATTR_USBIN_IMAX,
+	ATTR_DCIN_IMAX,
+	ATTR_BAT_VSAFE,
+	ATTR_BAT_VMAX,
+	ATTR_BAT_VMIN,
+	ATTR_CHG_VDET,
+	ATTR_VIN_MIN,
+	_ATTR_CNT,
+};
+
+struct smbb_charger {
+	unsigned int revision;
+	unsigned int addr;
+	struct device *dev;
+	struct extcon_dev *edev;
+
+	bool dc_disabled;
+	bool jeita_ext_temp;
+	unsigned long status;
+	struct mutex statlock;
+
+	unsigned int attr[_ATTR_CNT];
+
+	struct power_supply *usb_psy;
+	struct power_supply *dc_psy;
+	struct power_supply *bat_psy;
+	struct regmap *regmap;
+
+	struct regulator_desc otg_rdesc;
+	struct regulator_dev *otg_reg;
+};
+
+static const unsigned int smbb_usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_NONE,
+};
+
+static int smbb_vbat_weak_fn(unsigned int index)
+{
+	return 2100000 + index * 100000;
+}
+
+static int smbb_vin_fn(unsigned int index)
+{
+	if (index > 42)
+		return 5600000 + (index - 43) * 200000;
+	return 3400000 + index * 50000;
+}
+
+static int smbb_vmax_fn(unsigned int index)
+{
+	return 3240000 + index * 10000;
+}
+
+static int smbb_vbat_det_fn(unsigned int index)
+{
+	return 3240000 + index * 20000;
+}
+
+static int smbb_imax_fn(unsigned int index)
+{
+	if (index < 2)
+		return 100000 + index * 50000;
+	return index * 100000;
+}
+
+static int smbb_bat_imax_fn(unsigned int index)
+{
+	return index * 50000;
+}
+
+static unsigned int smbb_hw_lookup(unsigned int val, int (*fn)(unsigned int))
+{
+	unsigned int widx;
+	unsigned int sel;
+
+	for (widx = sel = 0; (*fn)(widx) <= val; ++widx)
+		sel = widx;
+
+	return sel;
+}
+
+static const struct smbb_charger_attr {
+	const char *name;
+	unsigned int reg;
+	unsigned int safe_reg;
+	unsigned int max;
+	unsigned int min;
+	unsigned int fail_ok;
+	int (*hw_fn)(unsigned int);
+} smbb_charger_attrs[] = {
+	[ATTR_BAT_ISAFE] = {
+		.name = "qcom,fast-charge-safe-current",
+		.reg = SMBB_CHG_ISAFE,
+		.max = 3000000,
+		.min = 200000,
+		.hw_fn = smbb_bat_imax_fn,
+		.fail_ok = 1,
+	},
+	[ATTR_BAT_IMAX] = {
+		.name = "qcom,fast-charge-current-limit",
+		.reg = SMBB_CHG_IMAX,
+		.safe_reg = SMBB_CHG_ISAFE,
+		.max = 3000000,
+		.min = 200000,
+		.hw_fn = smbb_bat_imax_fn,
+	},
+	[ATTR_DCIN_IMAX] = {
+		.name = "qcom,dc-current-limit",
+		.reg = SMBB_DC_IMAX,
+		.max = 2500000,
+		.min = 100000,
+		.hw_fn = smbb_imax_fn,
+	},
+	[ATTR_BAT_VSAFE] = {
+		.name = "qcom,fast-charge-safe-voltage",
+		.reg = SMBB_CHG_VSAFE,
+		.max = 5000000,
+		.min = 3240000,
+		.hw_fn = smbb_vmax_fn,
+		.fail_ok = 1,
+	},
+	[ATTR_BAT_VMAX] = {
+		.name = "qcom,fast-charge-high-threshold-voltage",
+		.reg = SMBB_CHG_VMAX,
+		.safe_reg = SMBB_CHG_VSAFE,
+		.max = 5000000,
+		.min = 3240000,
+		.hw_fn = smbb_vmax_fn,
+	},
+	[ATTR_BAT_VMIN] = {
+		.name = "qcom,fast-charge-low-threshold-voltage",
+		.reg = SMBB_CHG_VBAT_WEAK,
+		.max = 3600000,
+		.min = 2100000,
+		.hw_fn = smbb_vbat_weak_fn,
+	},
+	[ATTR_CHG_VDET] = {
+		.name = "qcom,auto-recharge-threshold-voltage",
+		.reg = SMBB_CHG_VBAT_DET,
+		.max = 5000000,
+		.min = 3240000,
+		.hw_fn = smbb_vbat_det_fn,
+	},
+	[ATTR_VIN_MIN] = {
+		.name = "qcom,minimum-input-voltage",
+		.reg = SMBB_CHG_VIN_MIN,
+		.max = 9600000,
+		.min = 4200000,
+		.hw_fn = smbb_vin_fn,
+	},
+	[ATTR_USBIN_IMAX] = {
+		.name = "usb-charge-current-limit",
+		.reg = SMBB_USB_IMAX,
+		.max = 2500000,
+		.min = 100000,
+		.hw_fn = smbb_imax_fn,
+	},
+};
+
+static int smbb_charger_attr_write(struct smbb_charger *chg,
+		enum smbb_attr which, unsigned int val)
+{
+	const struct smbb_charger_attr *prop;
+	unsigned int wval;
+	unsigned int out;
+	int rc;
+
+	prop = &smbb_charger_attrs[which];
+
+	if (val > prop->max || val < prop->min) {
+		dev_err(chg->dev, "value out of range for %s [%u:%u]\n",
+			prop->name, prop->min, prop->max);
+		return -EINVAL;
+	}
+
+	if (prop->safe_reg) {
+		rc = regmap_read(chg->regmap,
+				chg->addr + prop->safe_reg, &wval);
+		if (rc) {
+			dev_err(chg->dev,
+				"unable to read safe value for '%s'\n",
+				prop->name);
+			return rc;
+		}
+
+		wval = prop->hw_fn(wval);
+
+		if (val > wval) {
+			dev_warn(chg->dev,
+				"%s above safe value, clamping at %u\n",
+				prop->name, wval);
+			val = wval;
+		}
+	}
+
+	wval = smbb_hw_lookup(val, prop->hw_fn);
+
+	rc = regmap_write(chg->regmap, chg->addr + prop->reg, wval);
+	if (rc) {
+		dev_err(chg->dev, "unable to update %s", prop->name);
+		return rc;
+	}
+	out = prop->hw_fn(wval);
+	if (out != val) {
+		dev_warn(chg->dev,
+			"%s inaccurate, rounded to %u\n",
+			prop->name, out);
+	}
+
+	dev_dbg(chg->dev, "%s <= %d\n", prop->name, out);
+
+	chg->attr[which] = out;
+
+	return 0;
+}
+
+static int smbb_charger_attr_read(struct smbb_charger *chg,
+		enum smbb_attr which)
+{
+	const struct smbb_charger_attr *prop;
+	unsigned int val;
+	int rc;
+
+	prop = &smbb_charger_attrs[which];
+
+	rc = regmap_read(chg->regmap, chg->addr + prop->reg, &val);
+	if (rc) {
+		dev_err(chg->dev, "failed to read %s\n", prop->name);
+		return rc;
+	}
+	val = prop->hw_fn(val);
+	dev_dbg(chg->dev, "%s => %d\n", prop->name, val);
+
+	chg->attr[which] = val;
+
+	return 0;
+}
+
+static int smbb_charger_attr_parse(struct smbb_charger *chg,
+		enum smbb_attr which)
+{
+	const struct smbb_charger_attr *prop;
+	unsigned int val;
+	int rc;
+
+	prop = &smbb_charger_attrs[which];
+
+	rc = of_property_read_u32(chg->dev->of_node, prop->name, &val);
+	if (rc == 0) {
+		rc = smbb_charger_attr_write(chg, which, val);
+		if (!rc || !prop->fail_ok)
+			return rc;
+	}
+	return smbb_charger_attr_read(chg, which);
+}
+
+static void smbb_set_line_flag(struct smbb_charger *chg, int irq, int flag)
+{
+	bool state;
+	int ret;
+
+	ret = irq_get_irqchip_state(irq, IRQCHIP_STATE_LINE_LEVEL, &state);
+	if (ret < 0) {
+		dev_err(chg->dev, "failed to read irq line\n");
+		return;
+	}
+
+	mutex_lock(&chg->statlock);
+	if (state)
+		chg->status |= flag;
+	else
+		chg->status &= ~flag;
+	mutex_unlock(&chg->statlock);
+
+	dev_dbg(chg->dev, "status = %03lx\n", chg->status);
+}
+
+static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
+	extcon_set_state_sync(chg->edev, EXTCON_USB,
+				chg->status & STATUS_USBIN_VALID);
+	power_supply_changed(chg->usb_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_dc_valid_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_DCIN_VALID);
+	if (!chg->dc_disabled)
+		power_supply_changed(chg->dc_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_bat_temp_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+	unsigned int val;
+	int rc;
+
+	rc = regmap_read(chg->regmap, chg->addr + SMBB_BAT_TEMP_STATUS, &val);
+	if (rc)
+		return IRQ_HANDLED;
+
+	mutex_lock(&chg->statlock);
+	if (val & TEMP_STATUS_OK) {
+		chg->status |= STATUS_BAT_OK;
+	} else {
+		chg->status &= ~STATUS_BAT_OK;
+		if (val & TEMP_STATUS_HOT)
+			chg->status |= STATUS_BAT_HOT;
+	}
+	mutex_unlock(&chg->statlock);
+
+	power_supply_changed(chg->bat_psy);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_bat_present_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_BAT_PRESENT);
+	power_supply_changed(chg->bat_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_done_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_CHG_DONE);
+	power_supply_changed(chg->bat_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_gone_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_CHG_GONE);
+	power_supply_changed(chg->bat_psy);
+	power_supply_changed(chg->usb_psy);
+	if (!chg->dc_disabled)
+		power_supply_changed(chg->dc_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_fast_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_CHG_FAST);
+	power_supply_changed(chg->bat_psy);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_trkl_handler(int irq, void *_data)
+{
+	struct smbb_charger *chg = _data;
+
+	smbb_set_line_flag(chg, irq, STATUS_CHG_TRKL);
+	power_supply_changed(chg->bat_psy);
+
+	return IRQ_HANDLED;
+}
+
+static const struct smbb_irq {
+	const char *name;
+	irqreturn_t (*handler)(int, void *);
+} smbb_charger_irqs[] = {
+	{ "chg-done", smbb_chg_done_handler },
+	{ "chg-fast", smbb_chg_fast_handler },
+	{ "chg-trkl", smbb_chg_trkl_handler },
+	{ "bat-temp-ok", smbb_bat_temp_handler },
+	{ "bat-present", smbb_bat_present_handler },
+	{ "chg-gone", smbb_chg_gone_handler },
+	{ "usb-valid", smbb_usb_valid_handler },
+	{ "dc-valid", smbb_dc_valid_handler },
+};
+
+static int smbb_usbin_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	int rc = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		mutex_lock(&chg->statlock);
+		val->intval = !(chg->status & STATUS_CHG_GONE) &&
+				(chg->status & STATUS_USBIN_VALID);
+		mutex_unlock(&chg->statlock);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		val->intval = chg->attr[ATTR_USBIN_IMAX];
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+		val->intval = 2500000;
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_usbin_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	int rc;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		rc = smbb_charger_attr_write(chg, ATTR_USBIN_IMAX,
+				val->intval);
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_dcin_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	int rc = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		mutex_lock(&chg->statlock);
+		val->intval = !(chg->status & STATUS_CHG_GONE) &&
+				(chg->status & STATUS_DCIN_VALID);
+		mutex_unlock(&chg->statlock);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		val->intval = chg->attr[ATTR_DCIN_IMAX];
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+		val->intval = 2500000;
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_dcin_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	int rc;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		rc = smbb_charger_attr_write(chg, ATTR_DCIN_IMAX,
+				val->intval);
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_charger_writable_property(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT;
+}
+
+static int smbb_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	unsigned long status;
+	int rc = 0;
+
+	mutex_lock(&chg->statlock);
+	status = chg->status;
+	mutex_unlock(&chg->statlock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (status & STATUS_CHG_GONE)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (!(status & (STATUS_DCIN_VALID | STATUS_USBIN_VALID)))
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (status & STATUS_CHG_DONE)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (!(status & STATUS_BAT_OK))
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (status & (STATUS_CHG_FAST | STATUS_CHG_TRKL))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else /* everything is ok for charging, but we are not... */
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (status & STATUS_BAT_OK)
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		else if (status & STATUS_BAT_HOT)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_COLD;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (status & STATUS_CHG_FAST)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		else if (status & STATUS_CHG_TRKL)
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		else
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(status & STATUS_BAT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = chg->attr[ATTR_BAT_IMAX];
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		val->intval = chg->attr[ATTR_BAT_VMAX];
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		/* this charger is a single-cell lithium-ion battery charger
+		* only.  If you hook up some other technology, there will be
+		* fireworks.
+		*/
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = 3000000; /* single-cell li-ion low end */
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_battery_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct smbb_charger *chg = power_supply_get_drvdata(psy);
+	int rc;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		rc = smbb_charger_attr_write(chg, ATTR_BAT_IMAX, val->intval);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		rc = smbb_charger_attr_write(chg, ATTR_BAT_VMAX, val->intval);
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+
+	return rc;
+}
+
+static int smbb_battery_writable_property(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property smbb_charger_properties[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+};
+
+static enum power_supply_property smbb_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static const struct reg_off_mask_default {
+	unsigned int offset;
+	unsigned int mask;
+	unsigned int value;
+	unsigned int rev_mask;
+} smbb_charger_setup[] = {
+	/* The bootloader is supposed to set this... make sure anyway. */
+	{ SMBB_MISC_BOOT_DONE, BOOT_DONE, BOOT_DONE },
+
+	/* Disable software timer */
+	{ SMBB_CHG_TCHG_MAX_EN, TCHG_MAX_EN, 0 },
+
+	/* Clear and disable watchdog */
+	{ SMBB_CHG_WDOG_TIME, 0xff, 160 },
+	{ SMBB_CHG_WDOG_EN, WDOG_EN, 0 },
+
+	/* Use charger based EoC detection */
+	{ SMBB_CHG_IBAT_TERM_CHG, IBAT_TERM_CHG_IEOC, IBAT_TERM_CHG_IEOC_CHG },
+
+	/* Disable GSM PA load adjustment.
+	* The PA signal is incorrectly connected on v2.
+	*/
+	{ SMBB_CHG_CFG, 0xff, 0x00, BIT(3) },
+
+	/* Use VBAT (not VSYS) to compensate for IR drop during fast charging */
+	{ SMBB_BUCK_REG_MODE, BUCK_REG_MODE, BUCK_REG_MODE_VBAT },
+
+	/* Enable battery temperature comparators */
+	{ SMBB_BAT_BTC_CTRL, BTC_CTRL_COMP_EN, BTC_CTRL_COMP_EN },
+
+	/* Stop USB enumeration timer */
+	{ SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP },
+
+#if 0 /* FIXME supposedly only to disable hardware ARB termination */
+	{ SMBB_USB_SEC_ACCESS, SEC_ACCESS_MAGIC },
+	{ SMBB_USB_REV_BST, 0xff, REV_BST_CHG_GONE },
+#endif
+
+	/* Stop USB enumeration timer, again */
+	{ SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP },
+
+	/* Enable charging */
+	{ SMBB_CHG_CTRL, CTRL_EN, CTRL_EN },
+};
+
+static char *smbb_bif[] = { "smbb-bif" };
+
+static const struct power_supply_desc bat_psy_desc = {
+	.name = "smbb-bif",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = smbb_battery_properties,
+	.num_properties = ARRAY_SIZE(smbb_battery_properties),
+	.get_property = smbb_battery_get_property,
+	.set_property = smbb_battery_set_property,
+	.property_is_writeable = smbb_battery_writable_property,
+};
+
+static const struct power_supply_desc usb_psy_desc = {
+	.name = "smbb-usbin",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.properties = smbb_charger_properties,
+	.num_properties = ARRAY_SIZE(smbb_charger_properties),
+	.get_property = smbb_usbin_get_property,
+	.set_property = smbb_usbin_set_property,
+	.property_is_writeable = smbb_charger_writable_property,
+};
+
+static const struct power_supply_desc dc_psy_desc = {
+	.name = "smbb-dcin",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = smbb_charger_properties,
+	.num_properties = ARRAY_SIZE(smbb_charger_properties),
+	.get_property = smbb_dcin_get_property,
+	.set_property = smbb_dcin_set_property,
+	.property_is_writeable = smbb_charger_writable_property,
+};
+
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, OTG_CTL_EN);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	int rc;
+
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+				OTG_CTL_EN, 0);
+	if (rc)
+		dev_err(chg->dev, "failed to update OTG_CTL\n");
+	return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+	struct smbb_charger *chg = rdev_get_drvdata(rdev);
+	unsigned int value = 0;
+	int rc;
+
+	rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+	if (rc)
+		dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+	return !!(value & OTG_CTL_EN);
+}
+
+static const struct regulator_ops smbb_chg_otg_ops = {
+	.enable = smbb_chg_otg_enable,
+	.disable = smbb_chg_otg_disable,
+	.is_enabled = smbb_chg_otg_is_enabled,
+};
+
+static int smbb_charger_probe(struct platform_device *pdev)
+{
+	struct power_supply_config bat_cfg = {};
+	struct power_supply_config usb_cfg = {};
+	struct power_supply_config dc_cfg = {};
+	struct smbb_charger *chg;
+	struct regulator_config config = { };
+	int rc, i;
+
+	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	chg->dev = &pdev->dev;
+	mutex_init(&chg->statlock);
+
+	chg->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!chg->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	rc = of_property_read_u32(pdev->dev.of_node, "reg", &chg->addr);
+	if (rc) {
+		dev_err(&pdev->dev, "missing or invalid 'reg' property\n");
+		return rc;
+	}
+
+	rc = regmap_read(chg->regmap, chg->addr + SMBB_MISC_REV2, &chg->revision);
+	if (rc) {
+		dev_err(&pdev->dev, "unable to read revision\n");
+		return rc;
+	}
+
+	chg->revision += 1;
+	if (chg->revision != 1 && chg->revision != 2 && chg->revision != 3) {
+		dev_err(&pdev->dev, "v%d hardware not supported\n", chg->revision);
+		return -ENODEV;
+	}
+	dev_info(&pdev->dev, "Initializing SMBB rev %u", chg->revision);
+
+	chg->dc_disabled = of_property_read_bool(pdev->dev.of_node, "qcom,disable-dc");
+
+	for (i = 0; i < _ATTR_CNT; ++i) {
+		rc = smbb_charger_attr_parse(chg, i);
+		if (rc) {
+			dev_err(&pdev->dev, "failed to parse/apply settings\n");
+			return rc;
+		}
+	}
+
+	bat_cfg.drv_data = chg;
+	bat_cfg.of_node = pdev->dev.of_node;
+	chg->bat_psy = devm_power_supply_register(&pdev->dev,
+						  &bat_psy_desc,
+						  &bat_cfg);
+	if (IS_ERR(chg->bat_psy)) {
+		dev_err(&pdev->dev, "failed to register battery\n");
+		return PTR_ERR(chg->bat_psy);
+	}
+
+	usb_cfg.drv_data = chg;
+	usb_cfg.supplied_to = smbb_bif;
+	usb_cfg.num_supplicants = ARRAY_SIZE(smbb_bif);
+	chg->usb_psy = devm_power_supply_register(&pdev->dev,
+						  &usb_psy_desc,
+						  &usb_cfg);
+	if (IS_ERR(chg->usb_psy)) {
+		dev_err(&pdev->dev, "failed to register USB power supply\n");
+		return PTR_ERR(chg->usb_psy);
+	}
+
+	chg->edev = devm_extcon_dev_allocate(&pdev->dev, smbb_usb_extcon_cable);
+	if (IS_ERR(chg->edev)) {
+		dev_err(&pdev->dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	rc = devm_extcon_dev_register(&pdev->dev, chg->edev);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "failed to register extcon device\n");
+		return rc;
+	}
+
+	if (!chg->dc_disabled) {
+		dc_cfg.drv_data = chg;
+		dc_cfg.supplied_to = smbb_bif;
+		dc_cfg.num_supplicants = ARRAY_SIZE(smbb_bif);
+		chg->dc_psy = devm_power_supply_register(&pdev->dev,
+							 &dc_psy_desc,
+							 &dc_cfg);
+		if (IS_ERR(chg->dc_psy)) {
+			dev_err(&pdev->dev, "failed to register DC power supply\n");
+			return PTR_ERR(chg->dc_psy);
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smbb_charger_irqs); ++i) {
+		int irq;
+
+		irq = platform_get_irq_byname(pdev, smbb_charger_irqs[i].name);
+		if (irq < 0)
+			return irq;
+
+		smbb_charger_irqs[i].handler(irq, chg);
+
+		rc = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+				smbb_charger_irqs[i].handler, IRQF_ONESHOT,
+				smbb_charger_irqs[i].name, chg);
+		if (rc) {
+			dev_err(&pdev->dev, "failed to request irq '%s'\n",
+				smbb_charger_irqs[i].name);
+			return rc;
+		}
+	}
+
+	/*
+	 * otg regulator is used to control VBUS voltage direction
+	 * when USB switches between host and gadget mode
+	 */
+	chg->otg_rdesc.id = -1;
+	chg->otg_rdesc.name = "otg-vbus";
+	chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+	chg->otg_rdesc.owner = THIS_MODULE;
+	chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+	chg->otg_rdesc.supply_name = "usb-otg-in";
+	chg->otg_rdesc.of_match = "otg-vbus";
+
+	config.dev = &pdev->dev;
+	config.driver_data = chg;
+
+	chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+					       &config);
+	if (IS_ERR(chg->otg_reg))
+		return PTR_ERR(chg->otg_reg);
+
+	chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
+			"qcom,jeita-extended-temp-range");
+
+	/* Set temperature range to [35%:70%] or [25%:80%] accordingly */
+	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_BAT_BTC_CTRL,
+			BTC_CTRL_COLD_EXT | BTC_CTRL_HOT_EXT_N,
+			chg->jeita_ext_temp ?
+				BTC_CTRL_COLD_EXT :
+				BTC_CTRL_HOT_EXT_N);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"unable to set %s temperature range\n",
+			chg->jeita_ext_temp ? "JEITA extended" : "normal");
+		return rc;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(smbb_charger_setup); ++i) {
+		const struct reg_off_mask_default *r = &smbb_charger_setup[i];
+
+		if (r->rev_mask & BIT(chg->revision))
+			continue;
+
+		rc = regmap_update_bits(chg->regmap, chg->addr + r->offset,
+				r->mask, r->value);
+		if (rc) {
+			dev_err(&pdev->dev,
+				"unable to initializing charging, bailing\n");
+			return rc;
+		}
+	}
+
+	platform_set_drvdata(pdev, chg);
+
+	return 0;
+}
+
+static int smbb_charger_remove(struct platform_device *pdev)
+{
+	struct smbb_charger *chg;
+
+	chg = platform_get_drvdata(pdev);
+
+	regmap_update_bits(chg->regmap, chg->addr + SMBB_CHG_CTRL, CTRL_EN, 0);
+
+	return 0;
+}
+
+static const struct of_device_id smbb_charger_id_table[] = {
+	{ .compatible = "qcom,pm8226-charger" },
+	{ .compatible = "qcom,pm8941-charger" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, smbb_charger_id_table);
+
+static struct platform_driver smbb_charger_driver = {
+	.probe	  = smbb_charger_probe,
+	.remove	 = smbb_charger_remove,
+	.driver	 = {
+		.name   = "qcom-smbb",
+		.of_match_table = smbb_charger_id_table,
+	},
+};
+module_platform_driver(smbb_charger_driver);
+
+MODULE_DESCRIPTION("Qualcomm Switch-Mode Battery Charger and Boost driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c
new file mode 100644
index 000000000..c04b96edc
--- /dev/null
+++ b/drivers/power/supply/rk817_charger.c
@@ -0,0 +1,1236 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Charger Driver for Rockchip rk817
+ *
+ * Copyright (c) 2021 Maya Matuszczyk <maccraft123mc@gmail.com>
+ *
+ * Authors: Maya Matuszczyk <maccraft123mc@gmail.com>
+ *	    Chris Morgan <macromorgan@hotmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/devm-helpers.h>
+#include <linux/mfd/rk808.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+/* Charging statuses reported by hardware register */
+enum rk817_charge_status {
+	CHRG_OFF,
+	DEAD_CHRG,
+	TRICKLE_CHRG,
+	CC_OR_CV_CHRG,
+	CHARGE_FINISH,
+	USB_OVER_VOL,
+	BAT_TMP_ERR,
+	BAT_TIM_ERR,
+};
+
+/*
+ * Max charging current read to/written from hardware register.
+ * Note how highest value corresponding to 0x7 is the lowest
+ * current, this is per the datasheet.
+ */
+enum rk817_chg_cur {
+	CHG_1A,
+	CHG_1_5A,
+	CHG_2A,
+	CHG_2_5A,
+	CHG_2_75A,
+	CHG_3A,
+	CHG_3_5A,
+	CHG_0_5A,
+};
+
+struct rk817_charger {
+	struct device *dev;
+	struct rk808 *rk808;
+
+	struct power_supply *bat_ps;
+	struct power_supply *chg_ps;
+	bool plugged_in;
+	bool battery_present;
+
+	/*
+	 * voltage_k and voltage_b values are used to calibrate the ADC
+	 * voltage readings. While they are documented in the BSP kernel and
+	 * datasheet as voltage_k and voltage_b, there is no further
+	 * information explaining them in more detail.
+	 */
+
+	uint32_t voltage_k;
+	uint32_t voltage_b;
+
+	/*
+	 * soc - state of charge - like the BSP this is stored as a percentage,
+	 * to the thousandth. BSP has a display state of charge (dsoc) and a
+	 * remaining state of charge (rsoc). This value will be used for both
+	 * purposes here so we don't do any fancy math to try and "smooth" the
+	 * charge and just report it as it is. Note for example an soc of 100
+	 * is stored as 100000, an soc of 50 is stored as 50000, etc.
+	 */
+	int soc;
+
+	/*
+	 * Capacity of battery when fully charged, equal or less than design
+	 * capacity depending upon wear. BSP kernel saves to nvram in mAh,
+	 * so this value is in mAh not the standard uAh.
+	 */
+	int fcc_mah;
+
+	/*
+	 * Calibrate the SOC on a fully charged battery, this way we can use
+	 * the calibrated SOC value to correct for columb counter drift.
+	 */
+	bool soc_cal;
+
+	/* Implementation specific immutable properties from device tree */
+	int res_div;
+	int sleep_enter_current_ua;
+	int sleep_filter_current_ua;
+	int bat_charge_full_design_uah;
+	int bat_voltage_min_design_uv;
+	int bat_voltage_max_design_uv;
+
+	/* Values updated periodically by driver for display. */
+	int charge_now_uah;
+	int volt_avg_uv;
+	int cur_avg_ua;
+	int max_chg_cur_ua;
+	int max_chg_volt_uv;
+	int charge_status;
+	int charger_input_volt_avg_uv;
+
+	/* Work queue to periodically update values. */
+	struct delayed_work work;
+};
+
+/* ADC coefficients extracted from BSP kernel */
+#define ADC_TO_CURRENT(adc_value, res_div)	\
+	(adc_value * 172 / res_div)
+
+#define CURRENT_TO_ADC(current, samp_res)	\
+	(current * samp_res / 172)
+
+#define CHARGE_TO_ADC(capacity, res_div)	\
+	(capacity * res_div * 3600 / 172 * 1000)
+
+#define ADC_TO_CHARGE_UAH(adc_value, res_div)	\
+	(adc_value / 3600 * 172 / res_div)
+
+static int rk817_chg_cur_to_reg(u32 chg_cur_ma)
+{
+	if (chg_cur_ma >= 3500)
+		return CHG_3_5A;
+	else if (chg_cur_ma >= 3000)
+		return CHG_3A;
+	else if (chg_cur_ma >= 2750)
+		return CHG_2_75A;
+	else if (chg_cur_ma >= 2500)
+		return CHG_2_5A;
+	else if (chg_cur_ma >= 2000)
+		return CHG_2A;
+	else if (chg_cur_ma >= 1500)
+		return CHG_1_5A;
+	else if (chg_cur_ma >= 1000)
+		return CHG_1A;
+	else if (chg_cur_ma >= 500)
+		return CHG_0_5A;
+	else
+		return -EINVAL;
+}
+
+static int rk817_chg_cur_from_reg(u8 reg)
+{
+	switch (reg) {
+	case CHG_0_5A:
+		return 500000;
+	case CHG_1A:
+		return 1000000;
+	case CHG_1_5A:
+		return 1500000;
+	case CHG_2A:
+		return 2000000;
+	case CHG_2_5A:
+		return 2500000;
+	case CHG_2_75A:
+		return 2750000;
+	case CHG_3A:
+		return 3000000;
+	case CHG_3_5A:
+		return 3500000;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void rk817_bat_calib_vol(struct rk817_charger *charger)
+{
+	uint32_t vcalib0 = 0;
+	uint32_t vcalib1 = 0;
+	u8 bulk_reg[2];
+
+	/* calibrate voltage */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB0_H,
+			 bulk_reg, 2);
+	vcalib0 = get_unaligned_be16(bulk_reg);
+
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_VCALIB1_H,
+			 bulk_reg, 2);
+	vcalib1 = get_unaligned_be16(bulk_reg);
+
+	/* values were taken from BSP kernel */
+	charger->voltage_k = (4025 - 2300) * 1000 /
+			     ((vcalib1 - vcalib0) ? (vcalib1 - vcalib0) : 1);
+	charger->voltage_b = 4025 - (charger->voltage_k * vcalib1) / 1000;
+}
+
+static void rk817_bat_calib_cur(struct rk817_charger *charger)
+{
+	u8 bulk_reg[2];
+
+	/* calibrate current */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_IOFFSET_H,
+			 bulk_reg, 2);
+	regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_CAL_OFFSET_H,
+			  bulk_reg, 2);
+}
+
+/*
+ * note that only the fcc_mah is really used by this driver, the other values
+ * are to ensure we can remain backwards compatible with the BSP kernel.
+ */
+static int rk817_record_battery_nvram_values(struct rk817_charger *charger)
+{
+	u8 bulk_reg[3];
+	int ret, rsoc;
+
+	/*
+	 * write the soc value to the nvram location used by the BSP kernel
+	 * for the dsoc value.
+	 */
+	put_unaligned_le24(charger->soc, bulk_reg);
+	ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_R1,
+				bulk_reg, 3);
+	if (ret < 0)
+		return ret;
+	/*
+	 * write the remaining capacity in mah to the nvram location used by
+	 * the BSP kernel for the rsoc value.
+	 */
+	rsoc = (charger->soc * charger->fcc_mah) / 100000;
+	put_unaligned_le24(rsoc, bulk_reg);
+	ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA0,
+				bulk_reg, 3);
+	if (ret < 0)
+		return ret;
+	/* write the fcc_mah in mAh, just as the BSP kernel does. */
+	put_unaligned_le24(charger->fcc_mah, bulk_reg);
+	ret = regmap_bulk_write(charger->rk808->regmap, RK817_GAS_GAUGE_DATA3,
+				bulk_reg, 3);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rk817_bat_calib_cap(struct rk817_charger *charger)
+{
+	struct rk808 *rk808 = charger->rk808;
+	int tmp, charge_now, charge_now_adc, volt_avg;
+	u8 bulk_reg[4];
+
+	/* Calibrate the soc and fcc on a fully charged battery */
+
+	if (charger->charge_status == CHARGE_FINISH && (!charger->soc_cal)) {
+		/*
+		 * soc should be 100000 and columb counter should show the full
+		 * charge capacity. Note that if the device is unplugged for a
+		 * period of several days the columb counter will have a large
+		 * margin of error, so setting it back to the full charge on
+		 * a completed charge cycle should correct this (my device was
+		 * showing 33% battery after 3 days unplugged when it should
+		 * have been closer to 95% based on voltage and charge
+		 * current).
+		 */
+
+		charger->soc = 100000;
+		charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah,
+					       charger->res_div);
+		put_unaligned_be32(charge_now_adc, bulk_reg);
+		regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3,
+				  bulk_reg, 4);
+
+		charger->soc_cal = 1;
+		dev_dbg(charger->dev,
+			"Fully charged. SOC is %d, full capacity is %d\n",
+			charger->soc, charger->fcc_mah * 1000);
+	}
+
+	/*
+	 * The columb counter can drift up slightly, so we should correct for
+	 * it. But don't correct it until we're at 100% soc.
+	 */
+	if (charger->charge_status == CHARGE_FINISH && charger->soc_cal) {
+		regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
+				 bulk_reg, 4);
+		charge_now_adc = get_unaligned_be32(bulk_reg);
+		if (charge_now_adc < 0)
+			return charge_now_adc;
+		charge_now = ADC_TO_CHARGE_UAH(charge_now_adc,
+					       charger->res_div);
+
+		/*
+		 * Re-init columb counter with updated values to correct drift.
+		 */
+		if (charge_now / 1000 > charger->fcc_mah) {
+			dev_dbg(charger->dev,
+				"Recalibrating columb counter to %d uah\n",
+				charge_now);
+			/*
+			 * Order of operations matters here to ensure we keep
+			 * enough precision until the last step to keep from
+			 * making needless updates to columb counter.
+			 */
+			charge_now_adc = CHARGE_TO_ADC(charger->fcc_mah,
+					 charger->res_div);
+			put_unaligned_be32(charge_now_adc, bulk_reg);
+			regmap_bulk_write(rk808->regmap,
+					  RK817_GAS_GAUGE_Q_INIT_H3,
+					  bulk_reg, 4);
+		}
+	}
+
+	/*
+	 * Calibrate the fully charged capacity when we previously had a full
+	 * battery (soc_cal = 1) and are now empty (at or below minimum design
+	 * voltage). If our columb counter is still positive, subtract that
+	 * from our fcc value to get a calibrated fcc, and if our columb
+	 * counter is negative add that to our fcc (but not to exceed our
+	 * design capacity).
+	 */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H,
+			 bulk_reg, 2);
+	tmp = get_unaligned_be16(bulk_reg);
+	volt_avg = (charger->voltage_k * tmp) + 1000 * charger->voltage_b;
+	if (volt_avg <= charger->bat_voltage_min_design_uv &&
+	    charger->soc_cal) {
+		regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
+				 bulk_reg, 4);
+		charge_now_adc = get_unaligned_be32(bulk_reg);
+		charge_now = ADC_TO_CHARGE_UAH(charge_now_adc,
+					       charger->res_div);
+		/*
+		 * Note, if charge_now is negative this will add it (what we
+		 * want) and if it's positive this will subtract (also what
+		 * we want).
+		 */
+		charger->fcc_mah = charger->fcc_mah - (charge_now / 1000);
+
+		dev_dbg(charger->dev,
+			"Recalibrating full charge capacity to %d uah\n",
+			charger->fcc_mah * 1000);
+	}
+
+	/*
+	 * Set the SOC to 0 if we are below the minimum system voltage.
+	 */
+	if (volt_avg <= charger->bat_voltage_min_design_uv) {
+		charger->soc = 0;
+		charge_now_adc = CHARGE_TO_ADC(0, charger->res_div);
+		put_unaligned_be32(charge_now_adc, bulk_reg);
+		regmap_bulk_write(rk808->regmap,
+				  RK817_GAS_GAUGE_Q_INIT_H3, bulk_reg, 4);
+		dev_warn(charger->dev,
+			 "Battery voltage %d below minimum voltage %d\n",
+			 volt_avg, charger->bat_voltage_min_design_uv);
+		}
+
+	rk817_record_battery_nvram_values(charger);
+
+	return 0;
+}
+
+static void rk817_read_props(struct rk817_charger *charger)
+{
+	int tmp, reg;
+	u8 bulk_reg[4];
+
+	/*
+	 * Recalibrate voltage and current readings if we need to BSP does both
+	 * on CUR_CALIB_UPD, ignoring VOL_CALIB_UPD. Curiously enough, both
+	 * documentation and the BSP show that you perform an update if bit 7
+	 * is 1, but you clear the status by writing a 1 to bit 7.
+	 */
+	regmap_read(charger->rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG1, &reg);
+	if (reg & RK817_VOL_CUR_CALIB_UPD) {
+		rk817_bat_calib_cur(charger);
+		rk817_bat_calib_vol(charger);
+		regmap_write_bits(charger->rk808->regmap,
+				  RK817_GAS_GAUGE_ADC_CONFIG1,
+				  RK817_VOL_CUR_CALIB_UPD,
+				  RK817_VOL_CUR_CALIB_UPD);
+	}
+
+	/* Update reported charge. */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
+			 bulk_reg, 4);
+	tmp = get_unaligned_be32(bulk_reg);
+	charger->charge_now_uah = ADC_TO_CHARGE_UAH(tmp, charger->res_div);
+	if (charger->charge_now_uah < 0)
+		charger->charge_now_uah = 0;
+	if (charger->charge_now_uah > charger->fcc_mah * 1000)
+		charger->charge_now_uah = charger->fcc_mah * 1000;
+
+	/* Update soc based on reported charge. */
+	charger->soc = charger->charge_now_uah * 100 / charger->fcc_mah;
+
+	/* Update reported voltage. */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_VOL_H,
+			 bulk_reg, 2);
+	tmp = get_unaligned_be16(bulk_reg);
+	charger->volt_avg_uv = (charger->voltage_k * tmp) + 1000 *
+				charger->voltage_b;
+
+	/*
+	 * Update reported current. Note value from registers is a signed 16
+	 * bit int.
+	 */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_BAT_CUR_H,
+			 bulk_reg, 2);
+	tmp = (short int)get_unaligned_be16(bulk_reg);
+	charger->cur_avg_ua = ADC_TO_CURRENT(tmp, charger->res_div);
+
+	/*
+	 * Update the max charge current. This value shouldn't change, but we
+	 * can read it to report what the PMIC says it is instead of simply
+	 * returning the default value.
+	 */
+	regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, &reg);
+	charger->max_chg_cur_ua =
+		rk817_chg_cur_from_reg(reg & RK817_CHRG_CUR_SEL);
+
+	/*
+	 * Update max charge voltage. Like the max charge current this value
+	 * shouldn't change, but we can report what the PMIC says.
+	 */
+	regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_OUT, &reg);
+	charger->max_chg_volt_uv = ((((reg & RK817_CHRG_VOL_SEL) >> 4) *
+				    50000) + 4100000);
+
+	/* Check if battery still present. */
+	regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, &reg);
+	charger->battery_present = (reg & RK817_BAT_EXS);
+
+	/* Get which type of charge we are using (if any). */
+	regmap_read(charger->rk808->regmap, RK817_PMIC_CHRG_STS, &reg);
+	charger->charge_status = (reg >> 4) & 0x07;
+
+	/*
+	 * Get charger input voltage. Note that on my example hardware (an
+	 * Odroid Go Advance) the voltage of the power connector is measured
+	 * on the register labelled USB in the datasheet; I don't know if this
+	 * is how it is designed or just a quirk of the implementation. I
+	 * believe this will also measure the voltage of the USB output when in
+	 * OTG mode, if that is the case we may need to change this in the
+	 * future to return 0 if the power supply status is offline (I can't
+	 * test this with my current implementation. Also, when the voltage
+	 * should be zero sometimes the ADC still shows a single bit (which
+	 * would register as 20000uv). When this happens set it to 0.
+	 */
+	regmap_bulk_read(charger->rk808->regmap, RK817_GAS_GAUGE_USB_VOL_H,
+			 bulk_reg, 2);
+	reg = get_unaligned_be16(bulk_reg);
+	if (reg > 1) {
+		tmp = ((charger->voltage_k * reg / 1000 + charger->voltage_b) *
+		       60 / 46);
+		charger->charger_input_volt_avg_uv = tmp * 1000;
+	} else {
+		charger->charger_input_volt_avg_uv = 0;
+	}
+
+	/* Calibrate battery capacity and soc. */
+	rk817_bat_calib_cap(charger);
+}
+
+static int rk817_bat_get_prop(struct power_supply *ps,
+		enum power_supply_property prop,
+		union power_supply_propval *val)
+{
+	struct rk817_charger *charger = power_supply_get_drvdata(ps);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = charger->battery_present;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (charger->cur_avg_ua < 0) {
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			break;
+		}
+		switch (charger->charge_status) {
+		case CHRG_OFF:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		/*
+		 * Dead charge is documented, but not explained. I never
+		 * observed it but assume it's a pre-charge for a dead
+		 * battery.
+		 */
+		case DEAD_CHRG:
+		case TRICKLE_CHRG:
+		case CC_OR_CV_CHRG:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case CHARGE_FINISH:
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			return -EINVAL;
+
+		}
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		switch (charger->charge_status) {
+		case CHRG_OFF:
+		case CHARGE_FINISH:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		case TRICKLE_CHRG:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case DEAD_CHRG:
+		case CC_OR_CV_CHRG:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+			break;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = charger->fcc_mah * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = charger->bat_charge_full_design_uah;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+		val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = charger->charge_now_uah;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = charger->bat_voltage_min_design_uv;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		/* Add 500 so that values like 99999 are 100% not 99%. */
+		val->intval = (charger->soc + 500) / 1000;
+		if (val->intval > 100)
+			val->intval = 100;
+		if (val->intval < 0)
+			val->intval = 0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = charger->volt_avg_uv;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = charger->cur_avg_ua;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = charger->max_chg_cur_ua;
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		val->intval = charger->max_chg_volt_uv;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = charger->bat_voltage_max_design_uv;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int rk817_chg_get_prop(struct power_supply *ps,
+			      enum power_supply_property prop,
+			      union power_supply_propval *val)
+{
+	struct rk817_charger *charger = power_supply_get_drvdata(ps);
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = charger->plugged_in;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		/* max voltage from datasheet at 5.5v (default 5.0v) */
+		val->intval = 5500000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		/* min voltage from datasheet at 3.8v (default 5.0v) */
+		val->intval = 3800000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = charger->charger_input_volt_avg_uv;
+		break;
+	/*
+	 * While it's possible that other implementations could use different
+	 * USB types, the current implementation for this PMIC (the Odroid Go
+	 * Advance) only uses a dedicated charging port with no rx/tx lines.
+	 */
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+
+}
+
+static irqreturn_t rk817_plug_in_isr(int irq, void *cg)
+{
+	struct rk817_charger *charger;
+
+	charger = (struct rk817_charger *)cg;
+	charger->plugged_in = 1;
+	power_supply_changed(charger->chg_ps);
+	power_supply_changed(charger->bat_ps);
+	/* try to recalibrate capacity if we hit full charge. */
+	charger->soc_cal = 0;
+
+	rk817_read_props(charger);
+
+	dev_dbg(charger->dev, "Power Cord Inserted\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rk817_plug_out_isr(int irq, void *cg)
+{
+	struct rk817_charger *charger;
+	struct rk808 *rk808;
+
+	charger = (struct rk817_charger *)cg;
+	rk808 = charger->rk808;
+	charger->plugged_in = 0;
+	power_supply_changed(charger->bat_ps);
+	power_supply_changed(charger->chg_ps);
+
+	/*
+	 * For some reason the bits of RK817_PMIC_CHRG_IN reset whenever the
+	 * power cord is unplugged. This was not documented in the BSP kernel
+	 * or the datasheet and only discovered by trial and error. Set minimum
+	 * USB input voltage to 4.5v and enable USB voltage input limit.
+	 */
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
+			  RK817_USB_VLIM_SEL, (0x05 << 4));
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN,
+			  (0x01 << 7));
+
+	/*
+	 * Set average USB input current limit to 1.5A and enable USB current
+	 * input limit.
+	 */
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
+			  RK817_USB_ILIM_SEL, 0x03);
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
+			  (0x01 << 3));
+
+	rk817_read_props(charger);
+
+	dev_dbg(charger->dev, "Power Cord Removed\n");
+
+	return IRQ_HANDLED;
+}
+
+static enum power_supply_property rk817_bat_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static enum power_supply_property rk817_chg_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+};
+
+static enum power_supply_usb_type rk817_usb_type[] = {
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+};
+
+static const struct power_supply_desc rk817_bat_desc = {
+	.name = "rk817-battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = rk817_bat_props,
+	.num_properties = ARRAY_SIZE(rk817_bat_props),
+	.get_property = rk817_bat_get_prop,
+};
+
+static const struct power_supply_desc rk817_chg_desc = {
+	.name = "rk817-charger",
+	.type = POWER_SUPPLY_TYPE_USB,
+	.usb_types = rk817_usb_type,
+	.num_usb_types = ARRAY_SIZE(rk817_usb_type),
+	.properties = rk817_chg_props,
+	.num_properties = ARRAY_SIZE(rk817_chg_props),
+	.get_property = rk817_chg_get_prop,
+};
+
+static int rk817_read_battery_nvram_values(struct rk817_charger *charger)
+{
+	u8 bulk_reg[3];
+	int ret;
+
+	/* Read the nvram data for full charge capacity. */
+	ret = regmap_bulk_read(charger->rk808->regmap,
+			       RK817_GAS_GAUGE_DATA3, bulk_reg, 3);
+	if (ret < 0)
+		return ret;
+	charger->fcc_mah = get_unaligned_le24(bulk_reg);
+
+	/*
+	 * Sanity checking for values equal to zero or less than would be
+	 * practical for this device (BSP Kernel assumes 500mAH or less) for
+	 * practicality purposes. Also check if the value is too large and
+	 * correct it.
+	 */
+	if ((charger->fcc_mah < 500) ||
+	   ((charger->fcc_mah * 1000) > charger->bat_charge_full_design_uah)) {
+		dev_info(charger->dev,
+			 "Invalid NVRAM max charge, setting to %u uAH\n",
+			 charger->bat_charge_full_design_uah);
+		charger->fcc_mah = charger->bat_charge_full_design_uah / 1000;
+	}
+
+	/*
+	 * Read the nvram for state of charge. Sanity check for values greater
+	 * than 100 (10000) or less than 0, because other things (BSP kernels,
+	 * U-Boot, or even i2cset) can write to this register. If the value is
+	 * off it should get corrected automatically when the voltage drops to
+	 * the min (soc is 0) or when the battery is full (soc is 100).
+	 */
+	ret = regmap_bulk_read(charger->rk808->regmap,
+			       RK817_GAS_GAUGE_BAT_R1, bulk_reg, 3);
+	if (ret < 0)
+		return ret;
+	charger->soc = get_unaligned_le24(bulk_reg);
+	if (charger->soc > 10000)
+		charger->soc = 10000;
+	if (charger->soc < 0)
+		charger->soc = 0;
+
+	return 0;
+}
+
+static int
+rk817_read_or_set_full_charge_on_boot(struct rk817_charger *charger,
+				struct power_supply_battery_info *bat_info)
+{
+	struct rk808 *rk808 = charger->rk808;
+	u8 bulk_reg[4];
+	u32 boot_voltage, boot_charge_mah;
+	int ret, reg, off_time, tmp;
+	bool first_boot;
+
+	/*
+	 * Check if the battery is uninitalized. If it is, the columb counter
+	 * needs to be set up.
+	 */
+	ret = regmap_read(rk808->regmap, RK817_GAS_GAUGE_GG_STS, &reg);
+	if (ret < 0)
+		return ret;
+	first_boot = reg & RK817_BAT_CON;
+	/*
+	 * If the battery is uninitialized, use the poweron voltage and an ocv
+	 * lookup to guess our charge. The number won't be very accurate until
+	 * we hit either our minimum voltage (0%) or full charge (100%).
+	 */
+	if (first_boot) {
+		regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H,
+				 bulk_reg, 2);
+		tmp = get_unaligned_be16(bulk_reg);
+		boot_voltage = (charger->voltage_k * tmp) +
+				1000 * charger->voltage_b;
+		/*
+		 * Since only implementation has no working thermistor, assume
+		 * 20C for OCV lookup. If lookup fails, report error with OCV
+		 * table.
+		 */
+		charger->soc = power_supply_batinfo_ocv2cap(bat_info,
+							    boot_voltage,
+							    20) * 1000;
+		if (charger->soc < 0)
+			charger->soc = 0;
+
+		/* Guess that full charge capacity is the design capacity */
+		charger->fcc_mah = charger->bat_charge_full_design_uah / 1000;
+		/*
+		 * Set battery as "set up". BSP driver uses this value even
+		 * though datasheet claims it's a read-only value.
+		 */
+		regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS,
+				  RK817_BAT_CON, 0);
+		/* Save nvram values */
+		ret = rk817_record_battery_nvram_values(charger);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = rk817_read_battery_nvram_values(charger);
+		if (ret < 0)
+			return ret;
+
+		regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
+				 bulk_reg, 4);
+		tmp = get_unaligned_be32(bulk_reg);
+		if (tmp < 0)
+			tmp = 0;
+		boot_charge_mah = ADC_TO_CHARGE_UAH(tmp,
+						    charger->res_div) / 1000;
+		/*
+		 * Check if the columb counter has been off for more than 30
+		 * minutes as it tends to drift downward. If so, re-init soc
+		 * with the boot voltage instead. Note the unit values for the
+		 * OFF_CNT register appear to be in decaminutes and stops
+		 * counting at 2550 (0xFF) minutes. BSP kernel used OCV, but
+		 * for me occasionally that would show invalid values. Boot
+		 * voltage is only accurate for me on first poweron (not
+		 * reboots), but we shouldn't ever encounter an OFF_CNT more
+		 * than 0 on a reboot anyway.
+		 */
+		regmap_read(rk808->regmap, RK817_GAS_GAUGE_OFF_CNT, &off_time);
+		if (off_time >= 3) {
+			regmap_bulk_read(rk808->regmap,
+					 RK817_GAS_GAUGE_PWRON_VOL_H,
+					 bulk_reg, 2);
+			tmp = get_unaligned_be16(bulk_reg);
+			boot_voltage = (charger->voltage_k * tmp) +
+					1000 * charger->voltage_b;
+			charger->soc =
+				power_supply_batinfo_ocv2cap(bat_info,
+							     boot_voltage,
+							     20) * 1000;
+		} else {
+			charger->soc = (boot_charge_mah * 1000 * 100 /
+					charger->fcc_mah);
+		}
+	}
+
+	regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_PWRON_VOL_H,
+			 bulk_reg, 2);
+	tmp = get_unaligned_be16(bulk_reg);
+	boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b;
+	regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_Q_PRES_H3,
+			 bulk_reg, 4);
+	tmp = get_unaligned_be32(bulk_reg);
+	boot_charge_mah = ADC_TO_CHARGE_UAH(tmp, charger->res_div) / 1000;
+	regmap_bulk_read(rk808->regmap, RK817_GAS_GAUGE_OCV_VOL_H,
+			 bulk_reg, 2);
+	tmp = get_unaligned_be16(bulk_reg);
+	boot_voltage = (charger->voltage_k * tmp) + 1000 * charger->voltage_b;
+
+	/*
+	 * Now we have our full charge capacity and soc, init the columb
+	 * counter.
+	 */
+	boot_charge_mah = charger->soc * charger->fcc_mah / 100 / 1000;
+	if (boot_charge_mah > charger->fcc_mah)
+		boot_charge_mah = charger->fcc_mah;
+	tmp = CHARGE_TO_ADC(boot_charge_mah, charger->res_div);
+	put_unaligned_be32(tmp, bulk_reg);
+	ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_INIT_H3,
+			  bulk_reg, 4);
+	if (ret < 0)
+		return ret;
+
+	/* Set QMAX value to max design capacity. */
+	tmp = CHARGE_TO_ADC((charger->bat_charge_full_design_uah / 1000),
+			    charger->res_div);
+	put_unaligned_be32(tmp, bulk_reg);
+	ret = regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_Q_MAX_H3,
+				bulk_reg, 4);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rk817_battery_init(struct rk817_charger *charger,
+			      struct power_supply_battery_info *bat_info)
+{
+	struct rk808 *rk808 = charger->rk808;
+	u32 tmp, max_chg_vol_mv, max_chg_cur_ma;
+	u8 max_chg_vol_reg, chg_term_i_reg;
+	int ret, chg_term_ma, max_chg_cur_reg;
+	u8 bulk_reg[2];
+
+	/* Get initial plug state */
+	regmap_read(rk808->regmap, RK817_SYS_STS, &tmp);
+	charger->plugged_in = (tmp & RK817_PLUG_IN_STS);
+
+	/*
+	 * Turn on all ADC functions to measure battery, USB, and sys voltage,
+	 * as well as batt temp. Note only tested implementation so far does
+	 * not use a battery with a thermistor.
+	 */
+	regmap_write(rk808->regmap, RK817_GAS_GAUGE_ADC_CONFIG0, 0xfc);
+
+	/*
+	 * Set relax mode voltage sampling interval and ADC offset calibration
+	 * interval to 8 minutes to mirror BSP kernel. Set voltage and current
+	 * modes to average to mirror BSP kernel.
+	 */
+	regmap_write(rk808->regmap, RK817_GAS_GAUGE_GG_CON, 0x04);
+
+	/* Calibrate voltage like the BSP does here. */
+	rk817_bat_calib_vol(charger);
+
+	/* Write relax threshold, derived from sleep enter current. */
+	tmp = CURRENT_TO_ADC(charger->sleep_enter_current_ua,
+			     charger->res_div);
+	put_unaligned_be16(tmp, bulk_reg);
+	regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_RELAX_THRE_H,
+			  bulk_reg, 2);
+
+	/* Write sleep sample current, derived from sleep filter current. */
+	tmp = CURRENT_TO_ADC(charger->sleep_filter_current_ua,
+			     charger->res_div);
+	put_unaligned_be16(tmp, bulk_reg);
+	regmap_bulk_write(rk808->regmap, RK817_GAS_GAUGE_SLEEP_CON_SAMP_CUR_H,
+			  bulk_reg, 2);
+
+	/* Restart battery relax voltage */
+	regmap_write_bits(rk808->regmap, RK817_GAS_GAUGE_GG_STS,
+			  RK817_RELAX_VOL_UPD, (0x0 << 2));
+
+	/*
+	 * Set OCV Threshold Voltage to 127.5mV. This was hard coded like this
+	 * in the BSP.
+	 */
+	regmap_write(rk808->regmap, RK817_GAS_GAUGE_OCV_THRE_VOL, 0xff);
+
+	/*
+	 * Set maximum charging voltage to battery max voltage. Trying to be
+	 * incredibly safe with these value, as setting them wrong could
+	 * overcharge the battery, which would be very bad.
+	 */
+	max_chg_vol_mv = bat_info->constant_charge_voltage_max_uv / 1000;
+	max_chg_cur_ma = bat_info->constant_charge_current_max_ua / 1000;
+
+	if (max_chg_vol_mv < 4100) {
+		return dev_err_probe(charger->dev, -EINVAL,
+		       "invalid max charger voltage, value %u unsupported\n",
+			max_chg_vol_mv * 1000);
+	}
+	if (max_chg_vol_mv > 4450) {
+		dev_info(charger->dev,
+			 "Setting max charge voltage to 4450000uv\n");
+		max_chg_vol_mv = 4450;
+	}
+
+	if (max_chg_cur_ma < 500) {
+		return dev_err_probe(charger->dev, -EINVAL,
+		       "invalid max charger current, value %u unsupported\n",
+		       max_chg_cur_ma * 1000);
+	}
+	if (max_chg_cur_ma > 3500)
+		dev_info(charger->dev,
+			 "Setting max charge current to 3500000ua\n");
+
+	/*
+	 * Now that the values are sanity checked, if we subtract 4100 from the
+	 * max voltage and divide by 50, we conviently get the exact value for
+	 * the registers, which are 4.1v, 4.15v, 4.2v, 4.25v, 4.3v, 4.35v,
+	 * 4.4v, and 4.45v; these correspond to values 0x00 through 0x07.
+	 */
+	max_chg_vol_reg = (max_chg_vol_mv - 4100) / 50;
+
+	max_chg_cur_reg = rk817_chg_cur_to_reg(max_chg_cur_ma);
+
+	if (max_chg_vol_reg < 0 || max_chg_vol_reg > 7) {
+		return dev_err_probe(charger->dev, -EINVAL,
+		       "invalid max charger voltage, value %u unsupported\n",
+		       max_chg_vol_mv * 1000);
+	}
+	if (max_chg_cur_reg < 0 || max_chg_cur_reg > 7) {
+		return dev_err_probe(charger->dev, -EINVAL,
+		       "invalid max charger current, value %u unsupported\n",
+		       max_chg_cur_ma * 1000);
+	}
+
+	/*
+	 * Write the values to the registers, and deliver an emergency warning
+	 * in the event they are not written correctly.
+	 */
+	ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT,
+				RK817_CHRG_VOL_SEL, (max_chg_vol_reg << 4));
+	if (ret) {
+		dev_emerg(charger->dev,
+			  "Danger, unable to set max charger voltage: %u\n",
+			  ret);
+	}
+
+	ret = regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_OUT,
+				RK817_CHRG_CUR_SEL, max_chg_cur_reg);
+	if (ret) {
+		dev_emerg(charger->dev,
+			  "Danger, unable to set max charger current: %u\n",
+			  ret);
+	}
+
+	/* Set charge finishing mode to analog */
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM,
+			  RK817_CHRG_TERM_ANA_DIG, (0x0 << 2));
+
+	/*
+	 * Set charge finish current, warn if value not in range and keep
+	 * default.
+	 */
+	chg_term_ma = bat_info->charge_term_current_ua / 1000;
+	if (chg_term_ma < 150 || chg_term_ma > 400) {
+		dev_warn(charger->dev,
+			 "Invalid charge termination %u, keeping default\n",
+			 chg_term_ma * 1000);
+		chg_term_ma = 200;
+	}
+
+	/*
+	 * Values of 150ma, 200ma, 300ma, and 400ma correspond to 00, 01, 10,
+	 * and 11.
+	 */
+	chg_term_i_reg = (chg_term_ma - 100) / 100;
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_TERM,
+			  RK817_CHRG_TERM_ANA_SEL, chg_term_i_reg);
+
+	ret = rk817_read_or_set_full_charge_on_boot(charger, bat_info);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Set minimum USB input voltage to 4.5v and enable USB voltage input
+	 * limit.
+	 */
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
+			  RK817_USB_VLIM_SEL, (0x05 << 4));
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_VLIM_EN,
+			  (0x01 << 7));
+
+	/*
+	 * Set average USB input current limit to 1.5A and enable USB current
+	 * input limit.
+	 */
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN,
+			  RK817_USB_ILIM_SEL, 0x03);
+	regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
+			  (0x01 << 3));
+
+	return 0;
+}
+
+static void rk817_charging_monitor(struct work_struct *work)
+{
+	struct rk817_charger *charger;
+
+	charger = container_of(work, struct rk817_charger, work.work);
+
+	rk817_read_props(charger);
+
+	/* Run every 8 seconds like the BSP driver did. */
+	queue_delayed_work(system_wq, &charger->work, msecs_to_jiffies(8000));
+}
+
+static void rk817_cleanup_node(void *data)
+{
+	struct device_node *node = data;
+
+	of_node_put(node);
+}
+
+static int rk817_charger_probe(struct platform_device *pdev)
+{
+	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+	struct rk817_charger *charger;
+	struct device_node *node;
+	struct power_supply_battery_info *bat_info;
+	struct device *dev = &pdev->dev;
+	struct power_supply_config pscfg = {};
+	int plugin_irq, plugout_irq;
+	int of_value;
+	int ret;
+
+	node = of_get_child_by_name(dev->parent->of_node, "charger");
+	if (!node)
+		return -ENODEV;
+
+	ret = devm_add_action_or_reset(&pdev->dev, rk817_cleanup_node, node);
+	if (ret)
+		return ret;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->rk808 = rk808;
+
+	charger->dev = &pdev->dev;
+	platform_set_drvdata(pdev, charger);
+
+	rk817_bat_calib_vol(charger);
+
+	pscfg.drv_data = charger;
+	pscfg.of_node = node;
+
+	/*
+	 * Get sample resistor value. Note only values of 10000 or 20000
+	 * microohms are allowed. Schematic for my test implementation (an
+	 * Odroid Go Advance) shows a 10 milliohm resistor for reference.
+	 */
+	ret = of_property_read_u32(node, "rockchip,resistor-sense-micro-ohms",
+				   &of_value);
+	if (ret < 0) {
+		return dev_err_probe(dev, ret,
+				     "Error reading sample resistor value\n");
+	}
+	/*
+	 * Store as a 1 or a 2, since all we really use the value for is as a
+	 * divisor in some calculations.
+	 */
+	charger->res_div = (of_value == 20000) ? 2 : 1;
+
+	/*
+	 * Get sleep enter current value. Not sure what this value is for
+	 * other than to help calibrate the relax threshold.
+	 */
+	ret = of_property_read_u32(node,
+				   "rockchip,sleep-enter-current-microamp",
+				   &of_value);
+	if (ret < 0) {
+		return dev_err_probe(dev, ret,
+				     "Error reading sleep enter cur value\n");
+	}
+	charger->sleep_enter_current_ua = of_value;
+
+	/* Get sleep filter current value */
+	ret = of_property_read_u32(node,
+				   "rockchip,sleep-filter-current-microamp",
+				   &of_value);
+	if (ret < 0) {
+		return dev_err_probe(dev, ret,
+				     "Error reading sleep filter cur value\n");
+	}
+
+	charger->sleep_filter_current_ua = of_value;
+
+	charger->bat_ps = devm_power_supply_register(&pdev->dev,
+						     &rk817_bat_desc, &pscfg);
+	if (IS_ERR(charger->bat_ps))
+		return dev_err_probe(dev, -EINVAL,
+				     "Battery failed to probe\n");
+
+	charger->chg_ps = devm_power_supply_register(&pdev->dev,
+						     &rk817_chg_desc, &pscfg);
+	if (IS_ERR(charger->chg_ps))
+		return dev_err_probe(dev, -EINVAL,
+				     "Charger failed to probe\n");
+
+	ret = power_supply_get_battery_info(charger->bat_ps,
+					    &bat_info);
+	if (ret) {
+		return dev_err_probe(dev, ret,
+				     "Unable to get battery info: %d\n", ret);
+	}
+
+	if ((bat_info->charge_full_design_uah <= 0) ||
+	    (bat_info->voltage_min_design_uv <= 0) ||
+	    (bat_info->voltage_max_design_uv <= 0) ||
+	    (bat_info->constant_charge_voltage_max_uv <= 0) ||
+	    (bat_info->constant_charge_current_max_ua <= 0) ||
+	    (bat_info->charge_term_current_ua <= 0)) {
+		return dev_err_probe(dev, -EINVAL,
+				     "Required bat info missing or invalid\n");
+	}
+
+	charger->bat_charge_full_design_uah = bat_info->charge_full_design_uah;
+	charger->bat_voltage_min_design_uv = bat_info->voltage_min_design_uv;
+	charger->bat_voltage_max_design_uv = bat_info->voltage_max_design_uv;
+
+	/*
+	 * Has to run after power_supply_get_battery_info as it depends on some
+	 * values discovered from that routine.
+	 */
+	ret = rk817_battery_init(charger, bat_info);
+	if (ret)
+		return ret;
+
+	power_supply_put_battery_info(charger->bat_ps, bat_info);
+
+	plugin_irq = platform_get_irq(pdev, 0);
+	if (plugin_irq < 0)
+		return plugin_irq;
+
+	plugout_irq = platform_get_irq(pdev, 1);
+	if (plugout_irq < 0)
+		return plugout_irq;
+
+	ret = devm_request_threaded_irq(charger->dev, plugin_irq, NULL,
+					rk817_plug_in_isr,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"rk817_plug_in", charger);
+	if (ret) {
+		return dev_err_probe(&pdev->dev, ret,
+				      "plug_in_irq request failed!\n");
+	}
+
+	ret = devm_request_threaded_irq(charger->dev, plugout_irq, NULL,
+					rk817_plug_out_isr,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"rk817_plug_out", charger);
+	if (ret) {
+		return dev_err_probe(&pdev->dev, ret,
+				     "plug_out_irq request failed!\n");
+	}
+
+	ret = devm_delayed_work_autocancel(&pdev->dev, &charger->work,
+					   rk817_charging_monitor);
+	if (ret)
+		return ret;
+
+	/* Force the first update immediately. */
+	mod_delayed_work(system_wq, &charger->work, 0);
+
+	return 0;
+}
+
+
+static struct platform_driver rk817_charger_driver = {
+	.probe    = rk817_charger_probe,
+	.driver   = {
+		.name  = "rk817-charger",
+	},
+};
+module_platform_driver(rk817_charger_driver);
+
+MODULE_DESCRIPTION("Battery power supply driver for RK817 PMIC");
+MODULE_AUTHOR("Maya Matuszczyk <maccraft123mc@gmail.com>");
+MODULE_AUTHOR("Chris Morgan <macromorgan@hotmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk817-charger");
diff --git a/drivers/power/supply/rn5t618_power.c b/drivers/power/supply/rn5t618_power.c
new file mode 100644
index 000000000..a5e09ac78
--- /dev/null
+++ b/drivers/power/supply/rn5t618_power.c
@@ -0,0 +1,829 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2020 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/iio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define CHG_STATE_ADP_INPUT 0x40
+#define CHG_STATE_USB_INPUT 0x80
+#define CHG_STATE_MASK	0x1f
+#define CHG_STATE_CHG_OFF	0
+#define CHG_STATE_CHG_READY_VADP	1
+#define CHG_STATE_CHG_TRICKLE	2
+#define CHG_STATE_CHG_RAPID	3
+#define CHG_STATE_CHG_COMPLETE	4
+#define CHG_STATE_SUSPEND	5
+#define CHG_STATE_VCHG_OVER_VOL	6
+#define CHG_STATE_BAT_ERROR	7
+#define CHG_STATE_NO_BAT	8
+#define CHG_STATE_BAT_OVER_VOL	9
+#define CHG_STATE_BAT_TEMP_ERR	10
+#define CHG_STATE_DIE_ERR	11
+#define CHG_STATE_DIE_SHUTDOWN	12
+#define CHG_STATE_NO_BAT2	13
+#define CHG_STATE_CHG_READY_VUSB	14
+
+#define GCHGDET_TYPE_MASK 0x30
+#define GCHGDET_TYPE_SDP 0x00
+#define GCHGDET_TYPE_CDP 0x10
+#define GCHGDET_TYPE_DCP 0x20
+
+#define FG_ENABLE 1
+
+/*
+ * Formula seems accurate for battery current, but for USB current around 70mA
+ * per step was seen on Kobo Clara HD but all sources show the same formula
+ * also fur USB current. To avoid accidentially unwanted high currents we stick
+ * to that formula
+ */
+#define TO_CUR_REG(x) ((x) / 100000 - 1)
+#define FROM_CUR_REG(x) ((((x) & 0x1f) + 1) * 100000)
+#define CHG_MIN_CUR 100000
+#define CHG_MAX_CUR 1800000
+#define ADP_MAX_CUR 2500000
+#define USB_MAX_CUR 1400000
+
+
+struct rn5t618_power_info {
+	struct rn5t618 *rn5t618;
+	struct platform_device *pdev;
+	struct power_supply *battery;
+	struct power_supply *usb;
+	struct power_supply *adp;
+	struct iio_channel *channel_vusb;
+	struct iio_channel *channel_vadp;
+	int irq;
+};
+
+static enum power_supply_usb_type rn5t618_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN
+};
+
+static enum power_supply_property rn5t618_usb_props[] = {
+	/* input current limit is not very accurate */
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property rn5t618_adp_props[] = {
+	/* input current limit is not very accurate */
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+
+static enum power_supply_property rn5t618_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static int rn5t618_battery_read_doublereg(struct rn5t618_power_info *info,
+					  u8 reg, u16 *result)
+{
+	int ret, i;
+	u8 data[2];
+	u16 old, new;
+
+	old = 0;
+	/* Prevent races when registers are changing. */
+	for (i = 0; i < 3; i++) {
+		ret = regmap_bulk_read(info->rn5t618->regmap,
+				       reg, data, sizeof(data));
+		if (ret)
+			return ret;
+
+		new = data[0] << 8;
+		new |= data[1];
+		if (new == old)
+			break;
+
+		old = new;
+	}
+
+	*result = new;
+
+	return 0;
+}
+
+static int rn5t618_decode_status(unsigned int status)
+{
+	switch (status & CHG_STATE_MASK) {
+	case CHG_STATE_CHG_OFF:
+	case CHG_STATE_SUSPEND:
+	case CHG_STATE_VCHG_OVER_VOL:
+	case CHG_STATE_DIE_SHUTDOWN:
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	case CHG_STATE_CHG_TRICKLE:
+	case CHG_STATE_CHG_RAPID:
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	case CHG_STATE_CHG_COMPLETE:
+		return POWER_SUPPLY_STATUS_FULL;
+
+	default:
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+}
+
+static int rn5t618_battery_status(struct rn5t618_power_info *info,
+				  union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+	if (ret)
+		return ret;
+
+	val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (v & 0xc0) { /* USB or ADP plugged */
+		val->intval = rn5t618_decode_status(v);
+	} else
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return ret;
+}
+
+static int rn5t618_battery_present(struct rn5t618_power_info *info,
+				   union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+	if (ret)
+		return ret;
+
+	v &= CHG_STATE_MASK;
+	if ((v == CHG_STATE_NO_BAT) || (v == CHG_STATE_NO_BAT2))
+		val->intval = 0;
+	else
+		val->intval = 1;
+
+	return ret;
+}
+
+static int rn5t618_battery_voltage_now(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_VOLTAGE_1, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 2 * 2500 / 4095 * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_current_now(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_CC_AVEREG1, &res);
+	if (ret)
+		return ret;
+
+	/* current is negative when discharging */
+	val->intval = sign_extend32(res, 13) * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_capacity(struct rn5t618_power_info *info,
+				    union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_SOC, &v);
+	if (ret)
+		return ret;
+
+	val->intval = v;
+
+	return 0;
+}
+
+static int rn5t618_battery_temp(struct rn5t618_power_info *info,
+				union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TEMP_1, &res);
+	if (ret)
+		return ret;
+
+	val->intval = sign_extend32(res, 11) * 10 / 16;
+
+	return 0;
+}
+
+static int rn5t618_battery_tte(struct rn5t618_power_info *info,
+			       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_EMPTY_H, &res);
+	if (ret)
+		return ret;
+
+	if (res == 65535)
+		return -ENODATA;
+
+	val->intval = res * 60;
+
+	return 0;
+}
+
+static int rn5t618_battery_ttf(struct rn5t618_power_info *info,
+			       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_FULL_H, &res);
+	if (ret)
+		return ret;
+
+	if (res == 65535)
+		return -ENODATA;
+
+	val->intval = res * 60;
+
+	return 0;
+}
+
+static int rn5t618_battery_set_current_limit(struct rn5t618_power_info *info,
+				const union power_supply_propval *val)
+{
+	if (val->intval < CHG_MIN_CUR)
+		return -EINVAL;
+
+	if (val->intval >= CHG_MAX_CUR)
+		return -EINVAL;
+
+	return regmap_update_bits(info->rn5t618->regmap,
+				  RN5T618_CHGISET,
+				  0x1F, TO_CUR_REG(val->intval));
+}
+
+static int rn5t618_battery_get_current_limit(struct rn5t618_power_info *info,
+					     union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGISET,
+			  &regval);
+	if (ret < 0)
+		return ret;
+
+	val->intval = FROM_CUR_REG(regval);
+
+	return 0;
+}
+
+static int rn5t618_battery_charge_full(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_FA_CAP_H, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_charge_now(struct rn5t618_power_info *info,
+				      union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_RE_CAP_H, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	int ret = 0;
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = rn5t618_battery_status(info, val);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = rn5t618_battery_present(info, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = rn5t618_battery_voltage_now(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = rn5t618_battery_current_now(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = rn5t618_battery_capacity(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = rn5t618_battery_temp(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		ret = rn5t618_battery_tte(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		ret = rn5t618_battery_ttf(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		ret = rn5t618_battery_get_current_limit(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = rn5t618_battery_charge_full(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = rn5t618_battery_charge_now(info, val);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int rn5t618_battery_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return rn5t618_battery_set_current_limit(info, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rn5t618_battery_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int rn5t618_adp_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	unsigned int chgstate;
+	unsigned int regval;
+	bool online;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+	if (ret)
+		return ret;
+
+	online = !!(chgstate & CHG_STATE_ADP_INPUT);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		val->intval = rn5t618_decode_status(chgstate);
+		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = regmap_read(info->rn5t618->regmap,
+				  RN5T618_REGISET1, &regval);
+		if (ret < 0)
+			return ret;
+
+		val->intval = FROM_CUR_REG(regval);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (!info->channel_vadp)
+			return -ENODATA;
+
+		ret = iio_read_channel_processed_scale(info->channel_vadp, &val->intval, 1000);
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_adp_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (val->intval > ADP_MAX_CUR)
+			return -EINVAL;
+
+		if (val->intval < CHG_MIN_CUR)
+			return -EINVAL;
+
+		ret = regmap_write(info->rn5t618->regmap, RN5T618_REGISET1,
+				   TO_CUR_REG(val->intval));
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_adp_property_is_writeable(struct power_supply *psy,
+					     enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int rc5t619_usb_get_type(struct rn5t618_power_info *info,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_GCHGDET, &regval);
+	if (ret < 0)
+		return ret;
+
+	switch (regval & GCHGDET_TYPE_MASK) {
+	case GCHGDET_TYPE_SDP:
+		val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case GCHGDET_TYPE_CDP:
+		val->intval = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case GCHGDET_TYPE_DCP:
+		val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int rn5t618_usb_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	unsigned int chgstate;
+	unsigned int regval;
+	bool online;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+	if (ret)
+		return ret;
+
+	online = !!(chgstate & CHG_STATE_USB_INPUT);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		val->intval = rn5t618_decode_status(chgstate);
+		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		if (!online || (info->rn5t618->variant != RC5T619))
+			return -ENODATA;
+
+		return rc5t619_usb_get_type(info, val);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGCTL1,
+				  &regval);
+		if (ret < 0)
+			return ret;
+
+		val->intval = 0;
+		if (regval & 2) {
+			ret = regmap_read(info->rn5t618->regmap,
+					  RN5T618_REGISET2,
+					  &regval);
+			if (ret < 0)
+				return ret;
+
+			val->intval = FROM_CUR_REG(regval);
+		}
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (!info->channel_vusb)
+			return -ENODATA;
+
+		ret = iio_read_channel_processed_scale(info->channel_vusb, &val->intval, 1000);
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_usb_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (val->intval > USB_MAX_CUR)
+			return -EINVAL;
+
+		if (val->intval < CHG_MIN_CUR)
+			return -EINVAL;
+
+		ret = regmap_write(info->rn5t618->regmap, RN5T618_REGISET2,
+				   0xE0 | TO_CUR_REG(val->intval));
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_usb_property_is_writeable(struct power_supply *psy,
+					     enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct power_supply_desc rn5t618_battery_desc = {
+	.name                   = "rn5t618-battery",
+	.type                   = POWER_SUPPLY_TYPE_BATTERY,
+	.properties             = rn5t618_battery_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_battery_props),
+	.get_property           = rn5t618_battery_get_property,
+	.set_property           = rn5t618_battery_set_property,
+	.property_is_writeable  = rn5t618_battery_property_is_writeable,
+};
+
+static const struct power_supply_desc rn5t618_adp_desc = {
+	.name                   = "rn5t618-adp",
+	.type                   = POWER_SUPPLY_TYPE_MAINS,
+	.properties             = rn5t618_adp_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_adp_props),
+	.get_property           = rn5t618_adp_get_property,
+	.set_property           = rn5t618_adp_set_property,
+	.property_is_writeable  = rn5t618_adp_property_is_writeable,
+};
+
+static const struct power_supply_desc rn5t618_usb_desc = {
+	.name                   = "rn5t618-usb",
+	.type                   = POWER_SUPPLY_TYPE_USB,
+	.usb_types		= rn5t618_usb_types,
+	.num_usb_types		= ARRAY_SIZE(rn5t618_usb_types),
+	.properties             = rn5t618_usb_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_usb_props),
+	.get_property           = rn5t618_usb_get_property,
+	.set_property           = rn5t618_usb_set_property,
+	.property_is_writeable  = rn5t618_usb_property_is_writeable,
+};
+
+static irqreturn_t rn5t618_charger_irq(int irq, void *data)
+{
+	struct device *dev = data;
+	struct rn5t618_power_info *info = dev_get_drvdata(dev);
+
+	unsigned int ctrl, stat1, stat2, err;
+
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGERR_IRR, &err);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, &ctrl);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, &stat1);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, &stat2);
+
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGERR_IRR, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, 0);
+
+	dev_dbg(dev, "chgerr: %x chgctrl: %x chgstat: %x chgstat2: %x\n",
+		err, ctrl, stat1, stat2);
+
+	power_supply_changed(info->usb);
+	power_supply_changed(info->adp);
+	power_supply_changed(info->battery);
+
+	return IRQ_HANDLED;
+}
+
+static int rn5t618_power_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned int v;
+	struct power_supply_config psy_cfg = {};
+	struct rn5t618_power_info *info;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pdev = pdev;
+	info->rn5t618 = dev_get_drvdata(pdev->dev.parent);
+	info->irq = -1;
+
+	platform_set_drvdata(pdev, info);
+
+	info->channel_vusb = devm_iio_channel_get(&pdev->dev, "vusb");
+	if (IS_ERR(info->channel_vusb)) {
+		if (PTR_ERR(info->channel_vusb) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(info->channel_vusb);
+	}
+
+	info->channel_vadp = devm_iio_channel_get(&pdev->dev, "vadp");
+	if (IS_ERR(info->channel_vadp)) {
+		if (PTR_ERR(info->channel_vadp) == -ENODEV)
+			return -EPROBE_DEFER;
+		return PTR_ERR(info->channel_vadp);
+	}
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CONTROL, &v);
+	if (ret)
+		return ret;
+
+	if (!(v & FG_ENABLE)) {
+		/* E.g. the vendor kernels of various Kobo and Tolino Ebook
+		 * readers disable the fuel gauge on shutdown. If a kernel
+		 * without fuel gauge support is booted after that, the fuel
+		 * gauge will get decalibrated.
+		 */
+		dev_info(&pdev->dev, "Fuel gauge not enabled, enabling now\n");
+		dev_info(&pdev->dev, "Expect imprecise results\n");
+		regmap_update_bits(info->rn5t618->regmap, RN5T618_CONTROL,
+				   FG_ENABLE, FG_ENABLE);
+	}
+
+	psy_cfg.drv_data = info;
+	info->battery = devm_power_supply_register(&pdev->dev,
+						   &rn5t618_battery_desc,
+						   &psy_cfg);
+	if (IS_ERR(info->battery)) {
+		ret = PTR_ERR(info->battery);
+		dev_err(&pdev->dev, "failed to register battery: %d\n", ret);
+		return ret;
+	}
+
+	info->adp = devm_power_supply_register(&pdev->dev,
+					       &rn5t618_adp_desc,
+					       &psy_cfg);
+	if (IS_ERR(info->adp)) {
+		ret = PTR_ERR(info->adp);
+		dev_err(&pdev->dev, "failed to register adp: %d\n", ret);
+		return ret;
+	}
+
+	info->usb = devm_power_supply_register(&pdev->dev,
+					       &rn5t618_usb_desc,
+					       &psy_cfg);
+	if (IS_ERR(info->usb)) {
+		ret = PTR_ERR(info->usb);
+		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+		return ret;
+	}
+
+	if (info->rn5t618->irq_data)
+		info->irq = regmap_irq_get_virq(info->rn5t618->irq_data,
+						RN5T618_IRQ_CHG);
+
+	if (info->irq < 0)
+		info->irq = -1;
+	else {
+		ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+						rn5t618_charger_irq,
+						IRQF_ONESHOT,
+						"rn5t618_power",
+						&pdev->dev);
+
+		if (ret < 0) {
+			dev_err(&pdev->dev, "request IRQ:%d fail\n",
+				info->irq);
+			info->irq = -1;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver rn5t618_power_driver = {
+	.driver = {
+		.name   = "rn5t618-power",
+	},
+	.probe = rn5t618_power_probe,
+};
+
+module_platform_driver(rn5t618_power_driver);
+MODULE_ALIAS("platform:rn5t618-power");
+MODULE_DESCRIPTION("Power supply driver for RICOH RN5T618");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
new file mode 100644
index 000000000..736dec608
--- /dev/null
+++ b/drivers/power/supply/rt5033_battery.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fuel gauge driver for Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/mfd/rt5033.h>
+
+static int rt5033_battery_get_capacity(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	u32 msb;
+
+	regmap_read(battery->regmap, RT5033_FUEL_REG_SOC_H, &msb);
+
+	return msb;
+}
+
+static int rt5033_battery_get_present(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	u32 val;
+
+	regmap_read(battery->regmap, RT5033_FUEL_REG_CONFIG_L, &val);
+
+	return (val & RT5033_FUEL_BAT_PRESENT) ? true : false;
+}
+
+static int rt5033_battery_get_watt_prop(struct i2c_client *client,
+		enum power_supply_property psp)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+	unsigned int regh, regl;
+	int ret;
+	u32 msb, lsb;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		regh = RT5033_FUEL_REG_VBAT_H;
+		regl = RT5033_FUEL_REG_VBAT_L;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		regh = RT5033_FUEL_REG_AVG_VOLT_H;
+		regl = RT5033_FUEL_REG_AVG_VOLT_L;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		regh = RT5033_FUEL_REG_OCV_H;
+		regl = RT5033_FUEL_REG_OCV_L;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_read(battery->regmap, regh, &msb);
+	regmap_read(battery->regmap, regl, &lsb);
+
+	ret = ((msb << 4) + (lsb >> 4)) * 1250;
+
+	return ret;
+}
+
+static int rt5033_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		union power_supply_propval *val)
+{
+	struct rt5033_battery *battery = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		val->intval = rt5033_battery_get_watt_prop(battery->client,
+									psp);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = rt5033_battery_get_present(battery->client);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = rt5033_battery_get_capacity(battery->client);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property rt5033_battery_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static const struct regmap_config rt5033_battery_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= RT5033_FUEL_REG_END,
+};
+
+static const struct power_supply_desc rt5033_battery_desc = {
+	.name		= "rt5033-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= rt5033_battery_get_property,
+	.properties	= rt5033_battery_props,
+	.num_properties	= ARRAY_SIZE(rt5033_battery_props),
+};
+
+static int rt5033_battery_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct power_supply_config psy_cfg = {};
+	struct rt5033_battery *battery;
+	u32 ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+		return -EIO;
+
+	battery = devm_kzalloc(&client->dev, sizeof(*battery), GFP_KERNEL);
+	if (!battery)
+		return -ENOMEM;
+
+	battery->client = client;
+	battery->regmap = devm_regmap_init_i2c(client,
+			&rt5033_battery_regmap_config);
+	if (IS_ERR(battery->regmap)) {
+		dev_err(&client->dev, "Failed to initialize regmap\n");
+		return -EINVAL;
+	}
+
+	i2c_set_clientdata(client, battery);
+	psy_cfg.drv_data = battery;
+
+	battery->psy = power_supply_register(&client->dev,
+					     &rt5033_battery_desc, &psy_cfg);
+	if (IS_ERR(battery->psy)) {
+		dev_err(&client->dev, "Failed to register power supply\n");
+		ret = PTR_ERR(battery->psy);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rt5033_battery_remove(struct i2c_client *client)
+{
+	struct rt5033_battery *battery = i2c_get_clientdata(client);
+
+	power_supply_unregister(battery->psy);
+}
+
+static const struct i2c_device_id rt5033_battery_id[] = {
+	{ "rt5033-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
+
+static const struct of_device_id rt5033_battery_of_match[] = {
+	{ .compatible = "richtek,rt5033-battery", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rt5033_battery_of_match);
+
+static struct i2c_driver rt5033_battery_driver = {
+	.driver = {
+		.name = "rt5033-battery",
+		.of_match_table = rt5033_battery_of_match,
+	},
+	.probe = rt5033_battery_probe,
+	.remove = rt5033_battery_remove,
+	.id_table = rt5033_battery_id,
+};
+module_i2c_driver(rt5033_battery_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 fuel gauge driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c
new file mode 100644
index 000000000..72962286d
--- /dev/null
+++ b/drivers/power/supply/rt9455_charger.c
@@ -0,0 +1,1754 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Richtek RT9455WSC battery charger.
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/usb/phy.h>
+#include <linux/regmap.h>
+
+#define RT9455_MANUFACTURER			"Richtek"
+#define RT9455_MODEL_NAME			"RT9455"
+#define RT9455_DRIVER_NAME			"rt9455-charger"
+
+#define RT9455_IRQ_NAME				"interrupt"
+
+#define RT9455_PWR_RDY_DELAY			1 /* 1 second */
+#define RT9455_MAX_CHARGING_TIME		21600 /* 6 hrs */
+#define RT9455_BATT_PRESENCE_DELAY		60 /* 60 seconds */
+
+#define RT9455_CHARGE_MODE			0x00
+#define RT9455_BOOST_MODE			0x01
+
+#define RT9455_FAULT				0x03
+
+#define RT9455_IAICR_100MA			0x00
+#define RT9455_IAICR_500MA			0x01
+#define RT9455_IAICR_NO_LIMIT			0x03
+
+#define RT9455_CHARGE_DISABLE			0x00
+#define RT9455_CHARGE_ENABLE			0x01
+
+#define RT9455_PWR_FAULT			0x00
+#define RT9455_PWR_GOOD				0x01
+
+#define RT9455_REG_CTRL1			0x00 /* CTRL1 reg address */
+#define RT9455_REG_CTRL2			0x01 /* CTRL2 reg address */
+#define RT9455_REG_CTRL3			0x02 /* CTRL3 reg address */
+#define RT9455_REG_DEV_ID			0x03 /* DEV_ID reg address */
+#define RT9455_REG_CTRL4			0x04 /* CTRL4 reg address */
+#define RT9455_REG_CTRL5			0x05 /* CTRL5 reg address */
+#define RT9455_REG_CTRL6			0x06 /* CTRL6 reg address */
+#define RT9455_REG_CTRL7			0x07 /* CTRL7 reg address */
+#define RT9455_REG_IRQ1				0x08 /* IRQ1 reg address */
+#define RT9455_REG_IRQ2				0x09 /* IRQ2 reg address */
+#define RT9455_REG_IRQ3				0x0A /* IRQ3 reg address */
+#define RT9455_REG_MASK1			0x0B /* MASK1 reg address */
+#define RT9455_REG_MASK2			0x0C /* MASK2 reg address */
+#define RT9455_REG_MASK3			0x0D /* MASK3 reg address */
+
+enum rt9455_fields {
+	F_STAT, F_BOOST, F_PWR_RDY, F_OTG_PIN_POLARITY, /* CTRL1 reg fields */
+
+	F_IAICR, F_TE_SHDN_EN, F_HIGHER_OCP, F_TE, F_IAICR_INT, F_HIZ,
+	F_OPA_MODE, /* CTRL2 reg fields */
+
+	F_VOREG, F_OTG_PL, F_OTG_EN, /* CTRL3 reg fields */
+
+	F_VENDOR_ID, F_CHIP_REV, /* DEV_ID reg fields */
+
+	F_RST, /* CTRL4 reg fields */
+
+	F_TMR_EN, F_MIVR, F_IPREC, F_IEOC_PERCENTAGE, /* CTRL5 reg fields*/
+
+	F_IAICR_SEL, F_ICHRG, F_VPREC, /* CTRL6 reg fields */
+
+	F_BATD_EN, F_CHG_EN, F_VMREG, /* CTRL7 reg fields */
+
+	F_TSDI, F_VINOVPI, F_BATAB, /* IRQ1 reg fields */
+
+	F_CHRVPI, F_CHBATOVI, F_CHTERMI, F_CHRCHGI, F_CH32MI, F_CHTREGI,
+	F_CHMIVRI, /* IRQ2 reg fields */
+
+	F_BSTBUSOVI, F_BSTOLI, F_BSTLOWVI, F_BST32SI, /* IRQ3 reg fields */
+
+	F_TSDM, F_VINOVPIM, F_BATABM, /* MASK1 reg fields */
+
+	F_CHRVPIM, F_CHBATOVIM, F_CHTERMIM, F_CHRCHGIM, F_CH32MIM, F_CHTREGIM,
+	F_CHMIVRIM, /* MASK2 reg fields */
+
+	F_BSTVINOVIM, F_BSTOLIM, F_BSTLOWVIM, F_BST32SIM, /* MASK3 reg fields */
+
+	F_MAX_FIELDS
+};
+
+static const struct reg_field rt9455_reg_fields[] = {
+	[F_STAT]		= REG_FIELD(RT9455_REG_CTRL1, 4, 5),
+	[F_BOOST]		= REG_FIELD(RT9455_REG_CTRL1, 3, 3),
+	[F_PWR_RDY]		= REG_FIELD(RT9455_REG_CTRL1, 2, 2),
+	[F_OTG_PIN_POLARITY]	= REG_FIELD(RT9455_REG_CTRL1, 1, 1),
+
+	[F_IAICR]		= REG_FIELD(RT9455_REG_CTRL2, 6, 7),
+	[F_TE_SHDN_EN]		= REG_FIELD(RT9455_REG_CTRL2, 5, 5),
+	[F_HIGHER_OCP]		= REG_FIELD(RT9455_REG_CTRL2, 4, 4),
+	[F_TE]			= REG_FIELD(RT9455_REG_CTRL2, 3, 3),
+	[F_IAICR_INT]		= REG_FIELD(RT9455_REG_CTRL2, 2, 2),
+	[F_HIZ]			= REG_FIELD(RT9455_REG_CTRL2, 1, 1),
+	[F_OPA_MODE]		= REG_FIELD(RT9455_REG_CTRL2, 0, 0),
+
+	[F_VOREG]		= REG_FIELD(RT9455_REG_CTRL3, 2, 7),
+	[F_OTG_PL]		= REG_FIELD(RT9455_REG_CTRL3, 1, 1),
+	[F_OTG_EN]		= REG_FIELD(RT9455_REG_CTRL3, 0, 0),
+
+	[F_VENDOR_ID]		= REG_FIELD(RT9455_REG_DEV_ID, 4, 7),
+	[F_CHIP_REV]		= REG_FIELD(RT9455_REG_DEV_ID, 0, 3),
+
+	[F_RST]			= REG_FIELD(RT9455_REG_CTRL4, 7, 7),
+
+	[F_TMR_EN]		= REG_FIELD(RT9455_REG_CTRL5, 7, 7),
+	[F_MIVR]		= REG_FIELD(RT9455_REG_CTRL5, 4, 5),
+	[F_IPREC]		= REG_FIELD(RT9455_REG_CTRL5, 2, 3),
+	[F_IEOC_PERCENTAGE]	= REG_FIELD(RT9455_REG_CTRL5, 0, 1),
+
+	[F_IAICR_SEL]		= REG_FIELD(RT9455_REG_CTRL6, 7, 7),
+	[F_ICHRG]		= REG_FIELD(RT9455_REG_CTRL6, 4, 6),
+	[F_VPREC]		= REG_FIELD(RT9455_REG_CTRL6, 0, 2),
+
+	[F_BATD_EN]		= REG_FIELD(RT9455_REG_CTRL7, 6, 6),
+	[F_CHG_EN]		= REG_FIELD(RT9455_REG_CTRL7, 4, 4),
+	[F_VMREG]		= REG_FIELD(RT9455_REG_CTRL7, 0, 3),
+
+	[F_TSDI]		= REG_FIELD(RT9455_REG_IRQ1, 7, 7),
+	[F_VINOVPI]		= REG_FIELD(RT9455_REG_IRQ1, 6, 6),
+	[F_BATAB]		= REG_FIELD(RT9455_REG_IRQ1, 0, 0),
+
+	[F_CHRVPI]		= REG_FIELD(RT9455_REG_IRQ2, 7, 7),
+	[F_CHBATOVI]		= REG_FIELD(RT9455_REG_IRQ2, 5, 5),
+	[F_CHTERMI]		= REG_FIELD(RT9455_REG_IRQ2, 4, 4),
+	[F_CHRCHGI]		= REG_FIELD(RT9455_REG_IRQ2, 3, 3),
+	[F_CH32MI]		= REG_FIELD(RT9455_REG_IRQ2, 2, 2),
+	[F_CHTREGI]		= REG_FIELD(RT9455_REG_IRQ2, 1, 1),
+	[F_CHMIVRI]		= REG_FIELD(RT9455_REG_IRQ2, 0, 0),
+
+	[F_BSTBUSOVI]		= REG_FIELD(RT9455_REG_IRQ3, 7, 7),
+	[F_BSTOLI]		= REG_FIELD(RT9455_REG_IRQ3, 6, 6),
+	[F_BSTLOWVI]		= REG_FIELD(RT9455_REG_IRQ3, 5, 5),
+	[F_BST32SI]		= REG_FIELD(RT9455_REG_IRQ3, 3, 3),
+
+	[F_TSDM]		= REG_FIELD(RT9455_REG_MASK1, 7, 7),
+	[F_VINOVPIM]		= REG_FIELD(RT9455_REG_MASK1, 6, 6),
+	[F_BATABM]		= REG_FIELD(RT9455_REG_MASK1, 0, 0),
+
+	[F_CHRVPIM]		= REG_FIELD(RT9455_REG_MASK2, 7, 7),
+	[F_CHBATOVIM]		= REG_FIELD(RT9455_REG_MASK2, 5, 5),
+	[F_CHTERMIM]		= REG_FIELD(RT9455_REG_MASK2, 4, 4),
+	[F_CHRCHGIM]		= REG_FIELD(RT9455_REG_MASK2, 3, 3),
+	[F_CH32MIM]		= REG_FIELD(RT9455_REG_MASK2, 2, 2),
+	[F_CHTREGIM]		= REG_FIELD(RT9455_REG_MASK2, 1, 1),
+	[F_CHMIVRIM]		= REG_FIELD(RT9455_REG_MASK2, 0, 0),
+
+	[F_BSTVINOVIM]		= REG_FIELD(RT9455_REG_MASK3, 7, 7),
+	[F_BSTOLIM]		= REG_FIELD(RT9455_REG_MASK3, 6, 6),
+	[F_BSTLOWVIM]		= REG_FIELD(RT9455_REG_MASK3, 5, 5),
+	[F_BST32SIM]		= REG_FIELD(RT9455_REG_MASK3, 3, 3),
+};
+
+#define GET_MASK(fid)	(BIT(rt9455_reg_fields[fid].msb + 1) - \
+			 BIT(rt9455_reg_fields[fid].lsb))
+
+/*
+ * Each array initialised below shows the possible real-world values for a
+ * group of bits belonging to RT9455 registers. The arrays are sorted in
+ * ascending order. The index of each real-world value represents the value
+ * that is encoded in the group of bits belonging to RT9455 registers.
+ */
+/* REG06[6:4] (ICHRG) in uAh */
+static const int rt9455_ichrg_values[] = {
+	 500000,  650000,  800000,  950000, 1100000, 1250000, 1400000, 1550000
+};
+
+/*
+ * When the charger is in charge mode, REG02[7:2] represent battery regulation
+ * voltage.
+ */
+/* REG02[7:2] (VOREG) in uV */
+static const int rt9455_voreg_values[] = {
+	3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
+	3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
+	3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
+	3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
+	4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
+	4300000, 4330000, 4350000, 4370000, 4390000, 4410000, 4430000, 4450000,
+	4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000,
+	4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000
+};
+
+/*
+ * When the charger is in boost mode, REG02[7:2] represent boost output
+ * voltage.
+ */
+/* REG02[7:2] (Boost output voltage) in uV */
+static const int rt9455_boost_voltage_values[] = {
+	4425000, 4450000, 4475000, 4500000, 4525000, 4550000, 4575000, 4600000,
+	4625000, 4650000, 4675000, 4700000, 4725000, 4750000, 4775000, 4800000,
+	4825000, 4850000, 4875000, 4900000, 4925000, 4950000, 4975000, 5000000,
+	5025000, 5050000, 5075000, 5100000, 5125000, 5150000, 5175000, 5200000,
+	5225000, 5250000, 5275000, 5300000, 5325000, 5350000, 5375000, 5400000,
+	5425000, 5450000, 5475000, 5500000, 5525000, 5550000, 5575000, 5600000,
+	5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
+	5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
+};
+
+/* REG07[3:0] (VMREG) in uV */
+static const int rt9455_vmreg_values[] = {
+	4200000, 4220000, 4240000, 4260000, 4280000, 4300000, 4320000, 4340000,
+	4360000, 4380000, 4400000, 4430000, 4450000, 4450000, 4450000, 4450000
+};
+
+/* REG05[5:4] (IEOC_PERCENTAGE) */
+static const int rt9455_ieoc_percentage_values[] = {
+	10, 30, 20, 30
+};
+
+/* REG05[1:0] (MIVR) in uV */
+static const int rt9455_mivr_values[] = {
+	4000000, 4250000, 4500000, 5000000
+};
+
+/* REG05[1:0] (IAICR) in uA */
+static const int rt9455_iaicr_values[] = {
+	100000, 500000, 1000000, 2000000
+};
+
+struct rt9455_info {
+	struct i2c_client		*client;
+	struct regmap			*regmap;
+	struct regmap_field		*regmap_fields[F_MAX_FIELDS];
+	struct power_supply		*charger;
+#if IS_ENABLED(CONFIG_USB_PHY)
+	struct usb_phy			*usb_phy;
+	struct notifier_block		nb;
+#endif
+	struct delayed_work		pwr_rdy_work;
+	struct delayed_work		max_charging_time_work;
+	struct delayed_work		batt_presence_work;
+	u32				voreg;
+	u32				boost_voltage;
+};
+
+/*
+ * Iterate through each element of the 'tbl' array until an element whose value
+ * is greater than v is found. Return the index of the respective element,
+ * or the index of the last element in the array, if no such element is found.
+ */
+static unsigned int rt9455_find_idx(const int tbl[], int tbl_size, int v)
+{
+	int i;
+
+	/*
+	 * No need to iterate until the last index in the table because
+	 * if no element greater than v is found in the table,
+	 * or if only the last element is greater than v,
+	 * function returns the index of the last element.
+	 */
+	for (i = 0; i < tbl_size - 1; i++)
+		if (v <= tbl[i])
+			return i;
+
+	return (tbl_size - 1);
+}
+
+static int rt9455_get_field_val(struct rt9455_info *info,
+				enum rt9455_fields field,
+				const int tbl[], int tbl_size, int *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_field_read(info->regmap_fields[field], &v);
+	if (ret)
+		return ret;
+
+	v = (v >= tbl_size) ? (tbl_size - 1) : v;
+	*val = tbl[v];
+
+	return 0;
+}
+
+static int rt9455_set_field_val(struct rt9455_info *info,
+				enum rt9455_fields field,
+				const int tbl[], int tbl_size, int val)
+{
+	unsigned int idx = rt9455_find_idx(tbl, tbl_size, val);
+
+	return regmap_field_write(info->regmap_fields[field], idx);
+}
+
+static int rt9455_register_reset(struct rt9455_info *info)
+{
+	struct device *dev = &info->client->dev;
+	unsigned int v;
+	int ret, limit = 100;
+
+	ret = regmap_field_write(info->regmap_fields[F_RST], 0x01);
+	if (ret) {
+		dev_err(dev, "Failed to set RST bit\n");
+		return ret;
+	}
+
+	/*
+	 * To make sure that reset operation has finished, loop until RST bit
+	 * is set to 0.
+	 */
+	do {
+		ret = regmap_field_read(info->regmap_fields[F_RST], &v);
+		if (ret) {
+			dev_err(dev, "Failed to read RST bit\n");
+			return ret;
+		}
+
+		if (!v)
+			break;
+
+		usleep_range(10, 100);
+	} while (--limit);
+
+	if (!limit)
+		return -EIO;
+
+	return 0;
+}
+
+/* Charger power supply property routines */
+static enum power_supply_property rt9455_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *rt9455_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static int rt9455_charger_get_status(struct rt9455_info *info,
+				     union power_supply_propval *val)
+{
+	unsigned int v, pwr_rdy;
+	int ret;
+
+	ret = regmap_field_read(info->regmap_fields[F_PWR_RDY],
+				&pwr_rdy);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n");
+		return ret;
+	}
+
+	/*
+	 * If PWR_RDY bit is unset, the battery is discharging. Otherwise,
+	 * STAT bits value must be checked.
+	 */
+	if (!pwr_rdy) {
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = regmap_field_read(info->regmap_fields[F_STAT], &v);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read STAT bits\n");
+		return ret;
+	}
+
+	switch (v) {
+	case 0:
+		/*
+		 * If PWR_RDY bit is set, but STAT bits value is 0, the charger
+		 * may be in one of the following cases:
+		 * 1. CHG_EN bit is 0.
+		 * 2. CHG_EN bit is 1 but the battery is not connected.
+		 * In any of these cases, POWER_SUPPLY_STATUS_NOT_CHARGING is
+		 * returned.
+		 */
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		return 0;
+	case 1:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		return 0;
+	case 2:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		return 0;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		return 0;
+	}
+}
+
+static int rt9455_charger_get_health(struct rt9455_info *info,
+				     union power_supply_propval *val)
+{
+	struct device *dev = &info->client->dev;
+	unsigned int v;
+	int ret;
+
+	val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &v);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ1 register\n");
+		return ret;
+	}
+
+	if (v & GET_MASK(F_TSDI)) {
+		val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		return 0;
+	}
+	if (v & GET_MASK(F_VINOVPI)) {
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		return 0;
+	}
+	if (v & GET_MASK(F_BATAB)) {
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		return 0;
+	}
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ2, &v);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ2 register\n");
+		return ret;
+	}
+
+	if (v & GET_MASK(F_CHBATOVI)) {
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		return 0;
+	}
+	if (v & GET_MASK(F_CH32MI)) {
+		val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		return 0;
+	}
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ3, &v);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ3 register\n");
+		return ret;
+	}
+
+	if (v & GET_MASK(F_BSTBUSOVI)) {
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		return 0;
+	}
+	if (v & GET_MASK(F_BSTOLI)) {
+		val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		return 0;
+	}
+	if (v & GET_MASK(F_BSTLOWVI)) {
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		return 0;
+	}
+	if (v & GET_MASK(F_BST32SI)) {
+		val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+		return 0;
+	}
+
+	ret = regmap_field_read(info->regmap_fields[F_STAT], &v);
+	if (ret) {
+		dev_err(dev, "Failed to read STAT bits\n");
+		return ret;
+	}
+
+	if (v == RT9455_FAULT) {
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		return 0;
+	}
+
+	return 0;
+}
+
+static int rt9455_charger_get_battery_presence(struct rt9455_info *info,
+					       union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_field_read(info->regmap_fields[F_BATAB], &v);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read BATAB bit\n");
+		return ret;
+	}
+
+	/*
+	 * Since BATAB is 1 when battery is NOT present and 0 otherwise,
+	 * !BATAB is returned.
+	 */
+	val->intval = !v;
+
+	return 0;
+}
+
+static int rt9455_charger_get_online(struct rt9455_info *info,
+				     union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_field_read(info->regmap_fields[F_PWR_RDY], &v);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n");
+		return ret;
+	}
+
+	val->intval = (int)v;
+
+	return 0;
+}
+
+static int rt9455_charger_get_current(struct rt9455_info *info,
+				      union power_supply_propval *val)
+{
+	int curr;
+	int ret;
+
+	ret = rt9455_get_field_val(info, F_ICHRG,
+				   rt9455_ichrg_values,
+				   ARRAY_SIZE(rt9455_ichrg_values),
+				   &curr);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read ICHRG value\n");
+		return ret;
+	}
+
+	val->intval = curr;
+
+	return 0;
+}
+
+static int rt9455_charger_get_current_max(struct rt9455_info *info,
+					  union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(rt9455_ichrg_values) - 1;
+
+	val->intval = rt9455_ichrg_values[idx];
+
+	return 0;
+}
+
+static int rt9455_charger_get_voltage(struct rt9455_info *info,
+				      union power_supply_propval *val)
+{
+	int voltage;
+	int ret;
+
+	ret = rt9455_get_field_val(info, F_VOREG,
+				   rt9455_voreg_values,
+				   ARRAY_SIZE(rt9455_voreg_values),
+				   &voltage);
+	if (ret) {
+		dev_err(&info->client->dev, "Failed to read VOREG value\n");
+		return ret;
+	}
+
+	val->intval = voltage;
+
+	return 0;
+}
+
+static int rt9455_charger_get_voltage_max(struct rt9455_info *info,
+					  union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(rt9455_vmreg_values) - 1;
+
+	val->intval = rt9455_vmreg_values[idx];
+
+	return 0;
+}
+
+static int rt9455_charger_get_term_current(struct rt9455_info *info,
+					   union power_supply_propval *val)
+{
+	struct device *dev = &info->client->dev;
+	int ichrg, ieoc_percentage, ret;
+
+	ret = rt9455_get_field_val(info, F_ICHRG,
+				   rt9455_ichrg_values,
+				   ARRAY_SIZE(rt9455_ichrg_values),
+				   &ichrg);
+	if (ret) {
+		dev_err(dev, "Failed to read ICHRG value\n");
+		return ret;
+	}
+
+	ret = rt9455_get_field_val(info, F_IEOC_PERCENTAGE,
+				   rt9455_ieoc_percentage_values,
+				   ARRAY_SIZE(rt9455_ieoc_percentage_values),
+				   &ieoc_percentage);
+	if (ret) {
+		dev_err(dev, "Failed to read IEOC value\n");
+		return ret;
+	}
+
+	val->intval = ichrg * ieoc_percentage / 100;
+
+	return 0;
+}
+
+static int rt9455_charger_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct rt9455_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return rt9455_charger_get_status(info, val);
+	case POWER_SUPPLY_PROP_HEALTH:
+		return rt9455_charger_get_health(info, val);
+	case POWER_SUPPLY_PROP_PRESENT:
+		return rt9455_charger_get_battery_presence(info, val);
+	case POWER_SUPPLY_PROP_ONLINE:
+		return rt9455_charger_get_online(info, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return rt9455_charger_get_current(info, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return rt9455_charger_get_current_max(info, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		return rt9455_charger_get_voltage(info, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return rt9455_charger_get_voltage_max(info, val);
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return rt9455_charger_get_term_current(info, val);
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = RT9455_MODEL_NAME;
+		return 0;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = RT9455_MANUFACTURER;
+		return 0;
+	default:
+		return -ENODATA;
+	}
+}
+
+static int rt9455_hw_init(struct rt9455_info *info, u32 ichrg,
+			  u32 ieoc_percentage,
+			  u32 mivr, u32 iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int idx, ret;
+
+	ret = rt9455_register_reset(info);
+	if (ret) {
+		dev_err(dev, "Power On Reset failed\n");
+		return ret;
+	}
+
+	/* Set TE bit in order to enable end of charge detection */
+	ret = regmap_field_write(info->regmap_fields[F_TE], 1);
+	if (ret) {
+		dev_err(dev, "Failed to set TE bit\n");
+		return ret;
+	}
+
+	/* Set TE_SHDN_EN bit in order to enable end of charge detection */
+	ret = regmap_field_write(info->regmap_fields[F_TE_SHDN_EN], 1);
+	if (ret) {
+		dev_err(dev, "Failed to set TE_SHDN_EN bit\n");
+		return ret;
+	}
+
+	/*
+	 * Set BATD_EN bit in order to enable battery detection
+	 * when charging is done
+	 */
+	ret = regmap_field_write(info->regmap_fields[F_BATD_EN], 1);
+	if (ret) {
+		dev_err(dev, "Failed to set BATD_EN bit\n");
+		return ret;
+	}
+
+	/*
+	 * Disable Safety Timer. In charge mode, this timer terminates charging
+	 * if no read or write via I2C is done within 32 minutes. This timer
+	 * avoids overcharging the baterry when the OS is not loaded and the
+	 * charger is connected to a power source.
+	 * In boost mode, this timer triggers BST32SI interrupt if no read or
+	 * write via I2C is done within 32 seconds.
+	 * When the OS is loaded and the charger driver is inserted, it is used
+	 * delayed_work, named max_charging_time_work, to avoid overcharging
+	 * the battery.
+	 */
+	ret = regmap_field_write(info->regmap_fields[F_TMR_EN], 0x00);
+	if (ret) {
+		dev_err(dev, "Failed to disable Safety Timer\n");
+		return ret;
+	}
+
+	/* Set ICHRG to value retrieved from device-specific data */
+	ret = rt9455_set_field_val(info, F_ICHRG,
+				   rt9455_ichrg_values,
+				   ARRAY_SIZE(rt9455_ichrg_values), ichrg);
+	if (ret) {
+		dev_err(dev, "Failed to set ICHRG value\n");
+		return ret;
+	}
+
+	/* Set IEOC Percentage to value retrieved from device-specific data */
+	ret = rt9455_set_field_val(info, F_IEOC_PERCENTAGE,
+				   rt9455_ieoc_percentage_values,
+				   ARRAY_SIZE(rt9455_ieoc_percentage_values),
+				   ieoc_percentage);
+	if (ret) {
+		dev_err(dev, "Failed to set IEOC Percentage value\n");
+		return ret;
+	}
+
+	/* Set VOREG to value retrieved from device-specific data */
+	ret = rt9455_set_field_val(info, F_VOREG,
+				   rt9455_voreg_values,
+				   ARRAY_SIZE(rt9455_voreg_values),
+				   info->voreg);
+	if (ret) {
+		dev_err(dev, "Failed to set VOREG value\n");
+		return ret;
+	}
+
+	/* Set VMREG value to maximum (4.45V). */
+	idx = ARRAY_SIZE(rt9455_vmreg_values) - 1;
+	ret = rt9455_set_field_val(info, F_VMREG,
+				   rt9455_vmreg_values,
+				   ARRAY_SIZE(rt9455_vmreg_values),
+				   rt9455_vmreg_values[idx]);
+	if (ret) {
+		dev_err(dev, "Failed to set VMREG value\n");
+		return ret;
+	}
+
+	/*
+	 * Set MIVR to value retrieved from device-specific data.
+	 * If no value is specified, default value for MIVR is 4.5V.
+	 */
+	if (mivr == -1)
+		mivr = 4500000;
+
+	ret = rt9455_set_field_val(info, F_MIVR,
+				   rt9455_mivr_values,
+				   ARRAY_SIZE(rt9455_mivr_values), mivr);
+	if (ret) {
+		dev_err(dev, "Failed to set MIVR value\n");
+		return ret;
+	}
+
+	/*
+	 * Set IAICR to value retrieved from device-specific data.
+	 * If no value is specified, default value for IAICR is 500 mA.
+	 */
+	if (iaicr == -1)
+		iaicr = 500000;
+
+	ret = rt9455_set_field_val(info, F_IAICR,
+				   rt9455_iaicr_values,
+				   ARRAY_SIZE(rt9455_iaicr_values), iaicr);
+	if (ret) {
+		dev_err(dev, "Failed to set IAICR value\n");
+		return ret;
+	}
+
+	/*
+	 * Set IAICR_INT bit so that IAICR value is determined by IAICR bits
+	 * and not by OTG pin.
+	 */
+	ret = regmap_field_write(info->regmap_fields[F_IAICR_INT], 0x01);
+	if (ret) {
+		dev_err(dev, "Failed to set IAICR_INT bit\n");
+		return ret;
+	}
+
+	/*
+	 * Disable CHMIVRI interrupt. Because the driver sets MIVR value,
+	 * CHMIVRI is triggered, but there is no action to be taken by the
+	 * driver when CHMIVRI is triggered.
+	 */
+	ret = regmap_field_write(info->regmap_fields[F_CHMIVRIM], 0x01);
+	if (ret) {
+		dev_err(dev, "Failed to mask CHMIVRI interrupt\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+/*
+ * Before setting the charger into boost mode, boost output voltage is
+ * set. This is needed because boost output voltage may differ from battery
+ * regulation voltage. F_VOREG bits represent either battery regulation voltage
+ * or boost output voltage, depending on the mode the charger is. Both battery
+ * regulation voltage and boost output voltage are read from DT/ACPI during
+ * probe.
+ */
+static int rt9455_set_boost_voltage_before_boost_mode(struct rt9455_info *info)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	ret = rt9455_set_field_val(info, F_VOREG,
+				   rt9455_boost_voltage_values,
+				   ARRAY_SIZE(rt9455_boost_voltage_values),
+				   info->boost_voltage);
+	if (ret) {
+		dev_err(dev, "Failed to set boost output voltage value\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+/*
+ * Before setting the charger into charge mode, battery regulation voltage is
+ * set. This is needed because boost output voltage may differ from battery
+ * regulation voltage. F_VOREG bits represent either battery regulation voltage
+ * or boost output voltage, depending on the mode the charger is. Both battery
+ * regulation voltage and boost output voltage are read from DT/ACPI during
+ * probe.
+ */
+static int rt9455_set_voreg_before_charge_mode(struct rt9455_info *info)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	ret = rt9455_set_field_val(info, F_VOREG,
+				   rt9455_voreg_values,
+				   ARRAY_SIZE(rt9455_voreg_values),
+				   info->voreg);
+	if (ret) {
+		dev_err(dev, "Failed to set VOREG value\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rt9455_irq_handler_check_irq1_register(struct rt9455_info *info,
+						  bool *_is_battery_absent,
+						  bool *_alert_userspace)
+{
+	unsigned int irq1, mask1, mask2;
+	struct device *dev = &info->client->dev;
+	bool is_battery_absent = false;
+	bool alert_userspace = false;
+	int ret;
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &irq1);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ1 register\n");
+		return ret;
+	}
+
+	ret = regmap_read(info->regmap, RT9455_REG_MASK1, &mask1);
+	if (ret) {
+		dev_err(dev, "Failed to read MASK1 register\n");
+		return ret;
+	}
+
+	if (irq1 & GET_MASK(F_TSDI)) {
+		dev_err(dev, "Thermal shutdown fault occurred\n");
+		alert_userspace = true;
+	}
+
+	if (irq1 & GET_MASK(F_VINOVPI)) {
+		dev_err(dev, "Overvoltage input occurred\n");
+		alert_userspace = true;
+	}
+
+	if (irq1 & GET_MASK(F_BATAB)) {
+		dev_err(dev, "Battery absence occurred\n");
+		is_battery_absent = true;
+		alert_userspace = true;
+
+		if ((mask1 & GET_MASK(F_BATABM)) == 0) {
+			ret = regmap_field_write(info->regmap_fields[F_BATABM],
+						 0x01);
+			if (ret) {
+				dev_err(dev, "Failed to mask BATAB interrupt\n");
+				return ret;
+			}
+		}
+
+		ret = regmap_read(info->regmap, RT9455_REG_MASK2, &mask2);
+		if (ret) {
+			dev_err(dev, "Failed to read MASK2 register\n");
+			return ret;
+		}
+
+		if (mask2 & GET_MASK(F_CHTERMIM)) {
+			ret = regmap_field_write(
+				info->regmap_fields[F_CHTERMIM], 0x00);
+			if (ret) {
+				dev_err(dev, "Failed to unmask CHTERMI interrupt\n");
+				return ret;
+			}
+		}
+
+		if (mask2 & GET_MASK(F_CHRCHGIM)) {
+			ret = regmap_field_write(
+				info->regmap_fields[F_CHRCHGIM], 0x00);
+			if (ret) {
+				dev_err(dev, "Failed to unmask CHRCHGI interrupt\n");
+				return ret;
+			}
+		}
+
+		/*
+		 * When the battery is absent, max_charging_time_work is
+		 * cancelled, since no charging is done.
+		 */
+		cancel_delayed_work_sync(&info->max_charging_time_work);
+		/*
+		 * Since no interrupt is triggered when the battery is
+		 * reconnected, max_charging_time_work is not rescheduled.
+		 * Therefore, batt_presence_work is scheduled to check whether
+		 * the battery is still absent or not.
+		 */
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->batt_presence_work,
+				   RT9455_BATT_PRESENCE_DELAY * HZ);
+	}
+
+	*_is_battery_absent = is_battery_absent;
+
+	if (alert_userspace)
+		*_alert_userspace = alert_userspace;
+
+	return 0;
+}
+
+static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
+						  bool is_battery_absent,
+						  bool *_alert_userspace)
+{
+	unsigned int irq2, mask2;
+	struct device *dev = &info->client->dev;
+	bool alert_userspace = false;
+	int ret;
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ2, &irq2);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ2 register\n");
+		return ret;
+	}
+
+	ret = regmap_read(info->regmap, RT9455_REG_MASK2, &mask2);
+	if (ret) {
+		dev_err(dev, "Failed to read MASK2 register\n");
+		return ret;
+	}
+
+	if (irq2 & GET_MASK(F_CHRVPI)) {
+		dev_dbg(dev, "Charger fault occurred\n");
+		/*
+		 * CHRVPI bit is set in 2 cases:
+		 * 1. when the power source is connected to the charger.
+		 * 2. when the power source is disconnected from the charger.
+		 * To identify the case, PWR_RDY bit is checked. Because
+		 * PWR_RDY bit is set / cleared after CHRVPI interrupt is
+		 * triggered, it is used delayed_work to later read PWR_RDY bit.
+		 * Also, do not set to true alert_userspace, because there is no
+		 * need to notify userspace when CHRVPI interrupt has occurred.
+		 * Userspace will be notified after PWR_RDY bit is read.
+		 */
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->pwr_rdy_work,
+				   RT9455_PWR_RDY_DELAY * HZ);
+	}
+	if (irq2 & GET_MASK(F_CHBATOVI)) {
+		dev_err(dev, "Battery OVP occurred\n");
+		alert_userspace = true;
+	}
+	if (irq2 & GET_MASK(F_CHTERMI)) {
+		dev_dbg(dev, "Charge terminated\n");
+		if (!is_battery_absent) {
+			if ((mask2 & GET_MASK(F_CHTERMIM)) == 0) {
+				ret = regmap_field_write(
+					info->regmap_fields[F_CHTERMIM], 0x01);
+				if (ret) {
+					dev_err(dev, "Failed to mask CHTERMI interrupt\n");
+					return ret;
+				}
+				/*
+				 * Update MASK2 value, since CHTERMIM bit is
+				 * set.
+				 */
+				mask2 = mask2 | GET_MASK(F_CHTERMIM);
+			}
+			cancel_delayed_work_sync(&info->max_charging_time_work);
+			alert_userspace = true;
+		}
+	}
+	if (irq2 & GET_MASK(F_CHRCHGI)) {
+		dev_dbg(dev, "Recharge request\n");
+		ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+					 RT9455_CHARGE_ENABLE);
+		if (ret) {
+			dev_err(dev, "Failed to enable charging\n");
+			return ret;
+		}
+		if (mask2 & GET_MASK(F_CHTERMIM)) {
+			ret = regmap_field_write(
+				info->regmap_fields[F_CHTERMIM], 0x00);
+			if (ret) {
+				dev_err(dev, "Failed to unmask CHTERMI interrupt\n");
+				return ret;
+			}
+			/* Update MASK2 value, since CHTERMIM bit is cleared. */
+			mask2 = mask2 & ~GET_MASK(F_CHTERMIM);
+		}
+		if (!is_battery_absent) {
+			/*
+			 * No need to check whether the charger is connected to
+			 * power source when CHRCHGI is received, since CHRCHGI
+			 * is not triggered if the charger is not connected to
+			 * the power source.
+			 */
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->max_charging_time_work,
+					   RT9455_MAX_CHARGING_TIME * HZ);
+			alert_userspace = true;
+		}
+	}
+	if (irq2 & GET_MASK(F_CH32MI)) {
+		dev_err(dev, "Charger fault. 32 mins timeout occurred\n");
+		alert_userspace = true;
+	}
+	if (irq2 & GET_MASK(F_CHTREGI)) {
+		dev_warn(dev,
+			 "Charger warning. Thermal regulation loop active\n");
+		alert_userspace = true;
+	}
+	if (irq2 & GET_MASK(F_CHMIVRI)) {
+		dev_dbg(dev,
+			"Charger warning. Input voltage MIVR loop active\n");
+	}
+
+	if (alert_userspace)
+		*_alert_userspace = alert_userspace;
+
+	return 0;
+}
+
+static int rt9455_irq_handler_check_irq3_register(struct rt9455_info *info,
+						  bool *_alert_userspace)
+{
+	unsigned int irq3, mask3;
+	struct device *dev = &info->client->dev;
+	bool alert_userspace = false;
+	int ret;
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ3, &irq3);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ3 register\n");
+		return ret;
+	}
+
+	ret = regmap_read(info->regmap, RT9455_REG_MASK3, &mask3);
+	if (ret) {
+		dev_err(dev, "Failed to read MASK3 register\n");
+		return ret;
+	}
+
+	if (irq3 & GET_MASK(F_BSTBUSOVI)) {
+		dev_err(dev, "Boost fault. Overvoltage input occurred\n");
+		alert_userspace = true;
+	}
+	if (irq3 & GET_MASK(F_BSTOLI)) {
+		dev_err(dev, "Boost fault. Overload\n");
+		alert_userspace = true;
+	}
+	if (irq3 & GET_MASK(F_BSTLOWVI)) {
+		dev_err(dev, "Boost fault. Battery voltage too low\n");
+		alert_userspace = true;
+	}
+	if (irq3 & GET_MASK(F_BST32SI)) {
+		dev_err(dev, "Boost fault. 32 seconds timeout occurred.\n");
+		alert_userspace = true;
+	}
+
+	if (alert_userspace) {
+		dev_info(dev, "Boost fault occurred, therefore the charger goes into charge mode\n");
+		ret = rt9455_set_voreg_before_charge_mode(info);
+		if (ret) {
+			dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+			return ret;
+		}
+		ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+					 RT9455_CHARGE_MODE);
+		if (ret) {
+			dev_err(dev, "Failed to set charger in charge mode\n");
+			return ret;
+		}
+		*_alert_userspace = alert_userspace;
+	}
+
+	return 0;
+}
+
+static irqreturn_t rt9455_irq_handler_thread(int irq, void *data)
+{
+	struct rt9455_info *info = data;
+	struct device *dev;
+	bool alert_userspace = false;
+	bool is_battery_absent = false;
+	unsigned int status;
+	int ret;
+
+	if (!info)
+		return IRQ_NONE;
+
+	dev = &info->client->dev;
+
+	if (irq != info->client->irq) {
+		dev_err(dev, "Interrupt is not for RT9455 charger\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_field_read(info->regmap_fields[F_STAT], &status);
+	if (ret) {
+		dev_err(dev, "Failed to read STAT bits\n");
+		return IRQ_HANDLED;
+	}
+	dev_dbg(dev, "Charger status is %d\n", status);
+
+	/*
+	 * Each function that processes an IRQ register receives as output
+	 * parameter alert_userspace pointer. alert_userspace is set to true
+	 * in such a function only if an interrupt has occurred in the
+	 * respective interrupt register. This way, it is avoided the following
+	 * case: interrupt occurs only in IRQ1 register,
+	 * rt9455_irq_handler_check_irq1_register() function sets to true
+	 * alert_userspace, but rt9455_irq_handler_check_irq2_register()
+	 * and rt9455_irq_handler_check_irq3_register() functions set to false
+	 * alert_userspace and power_supply_changed() is never called.
+	 */
+	ret = rt9455_irq_handler_check_irq1_register(info, &is_battery_absent,
+						     &alert_userspace);
+	if (ret) {
+		dev_err(dev, "Failed to handle IRQ1 register\n");
+		return IRQ_HANDLED;
+	}
+
+	ret = rt9455_irq_handler_check_irq2_register(info, is_battery_absent,
+						     &alert_userspace);
+	if (ret) {
+		dev_err(dev, "Failed to handle IRQ2 register\n");
+		return IRQ_HANDLED;
+	}
+
+	ret = rt9455_irq_handler_check_irq3_register(info, &alert_userspace);
+	if (ret) {
+		dev_err(dev, "Failed to handle IRQ3 register\n");
+		return IRQ_HANDLED;
+	}
+
+	if (alert_userspace) {
+		/*
+		 * Sometimes, an interrupt occurs while rt9455_probe() function
+		 * is executing and power_supply_register() is not yet called.
+		 * Do not call power_supply_changed() in this case.
+		 */
+		if (info->charger)
+			power_supply_changed(info->charger);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int rt9455_discover_charger(struct rt9455_info *info, u32 *ichrg,
+				   u32 *ieoc_percentage,
+				   u32 *mivr, u32 *iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	if (!dev->of_node && !ACPI_HANDLE(dev)) {
+		dev_err(dev, "No support for either device tree or ACPI\n");
+		return -EINVAL;
+	}
+	/*
+	 * ICHRG, IEOC_PERCENTAGE, VOREG and boost output voltage are mandatory
+	 * parameters.
+	 */
+	ret = device_property_read_u32(dev, "richtek,output-charge-current",
+				       ichrg);
+	if (ret) {
+		dev_err(dev, "Error: missing \"output-charge-current\" property\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "richtek,end-of-charge-percentage",
+				       ieoc_percentage);
+	if (ret) {
+		dev_err(dev, "Error: missing \"end-of-charge-percentage\" property\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev,
+				       "richtek,battery-regulation-voltage",
+				       &info->voreg);
+	if (ret) {
+		dev_err(dev, "Error: missing \"battery-regulation-voltage\" property\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "richtek,boost-output-voltage",
+				       &info->boost_voltage);
+	if (ret) {
+		dev_err(dev, "Error: missing \"boost-output-voltage\" property\n");
+		return ret;
+	}
+
+	/*
+	 * MIVR and IAICR are optional parameters. Do not return error if one of
+	 * them is not present in ACPI table or device tree specification.
+	 */
+	device_property_read_u32(dev, "richtek,min-input-voltage-regulation",
+				 mivr);
+	device_property_read_u32(dev, "richtek,avg-input-current-regulation",
+				 iaicr);
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static int rt9455_usb_event_none(struct rt9455_info *info,
+				 u8 opa_mode, u8 iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	if (opa_mode == RT9455_BOOST_MODE) {
+		ret = rt9455_set_voreg_before_charge_mode(info);
+		if (ret) {
+			dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+			return ret;
+		}
+		/*
+		 * If the charger is in boost mode, and it has received
+		 * USB_EVENT_NONE, this means the consumer device powered by the
+		 * charger is not connected anymore.
+		 * In this case, the charger goes into charge mode.
+		 */
+		dev_dbg(dev, "USB_EVENT_NONE received, therefore the charger goes into charge mode\n");
+		ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+					 RT9455_CHARGE_MODE);
+		if (ret) {
+			dev_err(dev, "Failed to set charger in charge mode\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	dev_dbg(dev, "USB_EVENT_NONE received, therefore IAICR is set to its minimum value\n");
+	if (iaicr != RT9455_IAICR_100MA) {
+		ret = regmap_field_write(info->regmap_fields[F_IAICR],
+					 RT9455_IAICR_100MA);
+		if (ret) {
+			dev_err(dev, "Failed to set IAICR value\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_vbus(struct rt9455_info *info,
+				 u8 opa_mode, u8 iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	if (opa_mode == RT9455_BOOST_MODE) {
+		ret = rt9455_set_voreg_before_charge_mode(info);
+		if (ret) {
+			dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+			return ret;
+		}
+		/*
+		 * If the charger is in boost mode, and it has received
+		 * USB_EVENT_VBUS, this means the consumer device powered by the
+		 * charger is not connected anymore.
+		 * In this case, the charger goes into charge mode.
+		 */
+		dev_dbg(dev, "USB_EVENT_VBUS received, therefore the charger goes into charge mode\n");
+		ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+					 RT9455_CHARGE_MODE);
+		if (ret) {
+			dev_err(dev, "Failed to set charger in charge mode\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	dev_dbg(dev, "USB_EVENT_VBUS received, therefore IAICR is set to 500 mA\n");
+	if (iaicr != RT9455_IAICR_500MA) {
+		ret = regmap_field_write(info->regmap_fields[F_IAICR],
+					 RT9455_IAICR_500MA);
+		if (ret) {
+			dev_err(dev, "Failed to set IAICR value\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_id(struct rt9455_info *info,
+			       u8 opa_mode, u8 iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	if (opa_mode == RT9455_CHARGE_MODE) {
+		ret = rt9455_set_boost_voltage_before_boost_mode(info);
+		if (ret) {
+			dev_err(dev, "Failed to set boost output voltage before entering boost mode\n");
+			return ret;
+		}
+		/*
+		 * If the charger is in charge mode, and it has received
+		 * USB_EVENT_ID, this means a consumer device is connected and
+		 * it should be powered by the charger.
+		 * In this case, the charger goes into boost mode.
+		 */
+		dev_dbg(dev, "USB_EVENT_ID received, therefore the charger goes into boost mode\n");
+		ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+					 RT9455_BOOST_MODE);
+		if (ret) {
+			dev_err(dev, "Failed to set charger in boost mode\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	dev_dbg(dev, "USB_EVENT_ID received, therefore IAICR is set to its minimum value\n");
+	if (iaicr != RT9455_IAICR_100MA) {
+		ret = regmap_field_write(info->regmap_fields[F_IAICR],
+					 RT9455_IAICR_100MA);
+		if (ret) {
+			dev_err(dev, "Failed to set IAICR value\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_charger(struct rt9455_info *info,
+				    u8 opa_mode, u8 iaicr)
+{
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	if (opa_mode == RT9455_BOOST_MODE) {
+		ret = rt9455_set_voreg_before_charge_mode(info);
+		if (ret) {
+			dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+			return ret;
+		}
+		/*
+		 * If the charger is in boost mode, and it has received
+		 * USB_EVENT_CHARGER, this means the consumer device powered by
+		 * the charger is not connected anymore.
+		 * In this case, the charger goes into charge mode.
+		 */
+		dev_dbg(dev, "USB_EVENT_CHARGER received, therefore the charger goes into charge mode\n");
+		ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+					 RT9455_CHARGE_MODE);
+		if (ret) {
+			dev_err(dev, "Failed to set charger in charge mode\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	dev_dbg(dev, "USB_EVENT_CHARGER received, therefore IAICR is set to no current limit\n");
+	if (iaicr != RT9455_IAICR_NO_LIMIT) {
+		ret = regmap_field_write(info->regmap_fields[F_IAICR],
+					 RT9455_IAICR_NO_LIMIT);
+		if (ret) {
+			dev_err(dev, "Failed to set IAICR value\n");
+			return NOTIFY_DONE;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static int rt9455_usb_event(struct notifier_block *nb,
+			    unsigned long event, void *power)
+{
+	struct rt9455_info *info = container_of(nb, struct rt9455_info, nb);
+	struct device *dev = &info->client->dev;
+	unsigned int opa_mode, iaicr;
+	int ret;
+
+	/*
+	 * Determine whether the charger is in charge mode
+	 * or in boost mode.
+	 */
+	ret = regmap_field_read(info->regmap_fields[F_OPA_MODE],
+				&opa_mode);
+	if (ret) {
+		dev_err(dev, "Failed to read OPA_MODE value\n");
+		return NOTIFY_DONE;
+	}
+
+	ret = regmap_field_read(info->regmap_fields[F_IAICR],
+				&iaicr);
+	if (ret) {
+		dev_err(dev, "Failed to read IAICR value\n");
+		return NOTIFY_DONE;
+	}
+
+	dev_dbg(dev, "Received USB event %lu\n", event);
+	switch (event) {
+	case USB_EVENT_NONE:
+		return rt9455_usb_event_none(info, opa_mode, iaicr);
+	case USB_EVENT_VBUS:
+		return rt9455_usb_event_vbus(info, opa_mode, iaicr);
+	case USB_EVENT_ID:
+		return rt9455_usb_event_id(info, opa_mode, iaicr);
+	case USB_EVENT_CHARGER:
+		return rt9455_usb_event_charger(info, opa_mode, iaicr);
+	default:
+		dev_err(dev, "Unknown USB event\n");
+	}
+	return NOTIFY_DONE;
+}
+#endif
+
+static void rt9455_pwr_rdy_work_callback(struct work_struct *work)
+{
+	struct rt9455_info *info = container_of(work, struct rt9455_info,
+						pwr_rdy_work.work);
+	struct device *dev = &info->client->dev;
+	unsigned int pwr_rdy;
+	int ret;
+
+	ret = regmap_field_read(info->regmap_fields[F_PWR_RDY], &pwr_rdy);
+	if (ret) {
+		dev_err(dev, "Failed to read PWR_RDY bit\n");
+		return;
+	}
+	switch (pwr_rdy) {
+	case RT9455_PWR_FAULT:
+		dev_dbg(dev, "Charger disconnected from power source\n");
+		cancel_delayed_work_sync(&info->max_charging_time_work);
+		break;
+	case RT9455_PWR_GOOD:
+		dev_dbg(dev, "Charger connected to power source\n");
+		ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+					 RT9455_CHARGE_ENABLE);
+		if (ret) {
+			dev_err(dev, "Failed to enable charging\n");
+			return;
+		}
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->max_charging_time_work,
+				   RT9455_MAX_CHARGING_TIME * HZ);
+		break;
+	}
+	/*
+	 * Notify userspace that the charger has been either connected to or
+	 * disconnected from the power source.
+	 */
+	power_supply_changed(info->charger);
+}
+
+static void rt9455_max_charging_time_work_callback(struct work_struct *work)
+{
+	struct rt9455_info *info = container_of(work, struct rt9455_info,
+						max_charging_time_work.work);
+	struct device *dev = &info->client->dev;
+	int ret;
+
+	dev_err(dev, "Battery has been charging for at least 6 hours and is not yet fully charged. Battery is dead, therefore charging is disabled.\n");
+	ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+				 RT9455_CHARGE_DISABLE);
+	if (ret)
+		dev_err(dev, "Failed to disable charging\n");
+}
+
+static void rt9455_batt_presence_work_callback(struct work_struct *work)
+{
+	struct rt9455_info *info = container_of(work, struct rt9455_info,
+						batt_presence_work.work);
+	struct device *dev = &info->client->dev;
+	unsigned int irq1, mask1;
+	int ret;
+
+	ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &irq1);
+	if (ret) {
+		dev_err(dev, "Failed to read IRQ1 register\n");
+		return;
+	}
+
+	/*
+	 * If the battery is still absent, batt_presence_work is rescheduled.
+	 * Otherwise, max_charging_time is scheduled.
+	 */
+	if (irq1 & GET_MASK(F_BATAB)) {
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->batt_presence_work,
+				   RT9455_BATT_PRESENCE_DELAY * HZ);
+	} else {
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->max_charging_time_work,
+				   RT9455_MAX_CHARGING_TIME * HZ);
+
+		ret = regmap_read(info->regmap, RT9455_REG_MASK1, &mask1);
+		if (ret) {
+			dev_err(dev, "Failed to read MASK1 register\n");
+			return;
+		}
+
+		if (mask1 & GET_MASK(F_BATABM)) {
+			ret = regmap_field_write(info->regmap_fields[F_BATABM],
+						 0x00);
+			if (ret)
+				dev_err(dev, "Failed to unmask BATAB interrupt\n");
+		}
+		/*
+		 * Notify userspace that the battery is now connected to the
+		 * charger.
+		 */
+		power_supply_changed(info->charger);
+	}
+}
+
+static const struct power_supply_desc rt9455_charger_desc = {
+	.name			= RT9455_DRIVER_NAME,
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= rt9455_charger_properties,
+	.num_properties		= ARRAY_SIZE(rt9455_charger_properties),
+	.get_property		= rt9455_charger_get_property,
+};
+
+static bool rt9455_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT9455_REG_DEV_ID:
+	case RT9455_REG_IRQ1:
+	case RT9455_REG_IRQ2:
+	case RT9455_REG_IRQ3:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool rt9455_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RT9455_REG_DEV_ID:
+	case RT9455_REG_CTRL5:
+	case RT9455_REG_CTRL6:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config rt9455_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.writeable_reg	= rt9455_is_writeable_reg,
+	.volatile_reg	= rt9455_is_volatile_reg,
+	.max_register	= RT9455_REG_MASK3,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static int rt9455_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &client->dev;
+	struct rt9455_info *info;
+	struct power_supply_config rt9455_charger_config = {};
+	/*
+	 * Mandatory device-specific data values. Also, VOREG and boost output
+	 * voltage are mandatory values, but they are stored in rt9455_info
+	 * structure.
+	 */
+	u32 ichrg, ieoc_percentage;
+	/* Optional device-specific data values. */
+	u32 mivr = -1, iaicr = -1;
+	int i, ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->client = client;
+	i2c_set_clientdata(client, info);
+
+	info->regmap = devm_regmap_init_i2c(client,
+					    &rt9455_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		dev_err(dev, "Failed to initialize register map\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < F_MAX_FIELDS; i++) {
+		info->regmap_fields[i] =
+			devm_regmap_field_alloc(dev, info->regmap,
+						rt9455_reg_fields[i]);
+		if (IS_ERR(info->regmap_fields[i])) {
+			dev_err(dev,
+				"Failed to allocate regmap field = %d\n", i);
+			return PTR_ERR(info->regmap_fields[i]);
+		}
+	}
+
+	ret = rt9455_discover_charger(info, &ichrg, &ieoc_percentage,
+				      &mivr, &iaicr);
+	if (ret) {
+		dev_err(dev, "Failed to discover charger\n");
+		return ret;
+	}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+	info->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR(info->usb_phy)) {
+		dev_err(dev, "Failed to get USB transceiver\n");
+	} else {
+		info->nb.notifier_call = rt9455_usb_event;
+		ret = usb_register_notifier(info->usb_phy, &info->nb);
+		if (ret) {
+			dev_err(dev, "Failed to register USB notifier\n");
+			/*
+			 * If usb_register_notifier() fails, set notifier_call
+			 * to NULL, to avoid calling usb_unregister_notifier().
+			 */
+			info->nb.notifier_call = NULL;
+		}
+	}
+#endif
+
+	INIT_DEFERRABLE_WORK(&info->pwr_rdy_work, rt9455_pwr_rdy_work_callback);
+	INIT_DEFERRABLE_WORK(&info->max_charging_time_work,
+			     rt9455_max_charging_time_work_callback);
+	INIT_DEFERRABLE_WORK(&info->batt_presence_work,
+			     rt9455_batt_presence_work_callback);
+
+	rt9455_charger_config.of_node		= dev->of_node;
+	rt9455_charger_config.drv_data		= info;
+	rt9455_charger_config.supplied_to	= rt9455_charger_supplied_to;
+	rt9455_charger_config.num_supplicants	=
+					ARRAY_SIZE(rt9455_charger_supplied_to);
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					rt9455_irq_handler_thread,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					RT9455_DRIVER_NAME, info);
+	if (ret) {
+		dev_err(dev, "Failed to register IRQ handler\n");
+		goto put_usb_notifier;
+	}
+
+	ret = rt9455_hw_init(info, ichrg, ieoc_percentage, mivr, iaicr);
+	if (ret) {
+		dev_err(dev, "Failed to set charger to its default values\n");
+		goto put_usb_notifier;
+	}
+
+	info->charger = devm_power_supply_register(dev, &rt9455_charger_desc,
+						   &rt9455_charger_config);
+	if (IS_ERR(info->charger)) {
+		dev_err(dev, "Failed to register charger\n");
+		ret = PTR_ERR(info->charger);
+		goto put_usb_notifier;
+	}
+
+	return 0;
+
+put_usb_notifier:
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (info->nb.notifier_call)  {
+		usb_unregister_notifier(info->usb_phy, &info->nb);
+		info->nb.notifier_call = NULL;
+	}
+#endif
+	return ret;
+}
+
+static void rt9455_remove(struct i2c_client *client)
+{
+	int ret;
+	struct rt9455_info *info = i2c_get_clientdata(client);
+
+	ret = rt9455_register_reset(info);
+	if (ret)
+		dev_err(&info->client->dev, "Failed to set charger to its default values\n");
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+	if (info->nb.notifier_call)
+		usb_unregister_notifier(info->usb_phy, &info->nb);
+#endif
+
+	cancel_delayed_work_sync(&info->pwr_rdy_work);
+	cancel_delayed_work_sync(&info->max_charging_time_work);
+	cancel_delayed_work_sync(&info->batt_presence_work);
+}
+
+static const struct i2c_device_id rt9455_i2c_id_table[] = {
+	{ RT9455_DRIVER_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, rt9455_i2c_id_table);
+
+static const struct of_device_id rt9455_of_match[] = {
+	{ .compatible = "richtek,rt9455", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rt9455_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rt9455_i2c_acpi_match[] = {
+	{ "RT945500", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
+#endif
+
+static struct i2c_driver rt9455_driver = {
+	.probe		= rt9455_probe,
+	.remove		= rt9455_remove,
+	.id_table	= rt9455_i2c_id_table,
+	.driver = {
+		.name		= RT9455_DRIVER_NAME,
+		.of_match_table	= of_match_ptr(rt9455_of_match),
+		.acpi_match_table = ACPI_PTR(rt9455_i2c_acpi_match),
+	},
+};
+module_i2c_driver(rt9455_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anda-Maria Nicolae <anda-maria.nicolae@intel.com>");
+MODULE_DESCRIPTION("Richtek RT9455 Charger Driver");
diff --git a/drivers/power/supply/rx51_battery.c b/drivers/power/supply/rx51_battery.c
new file mode 100644
index 000000000..6e488ecf4
--- /dev/null
+++ b/drivers/power/supply/rx51_battery.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Nokia RX-51 battery driver
+ *
+ * Copyright (C) 2012  Pali Rohár <pali@kernel.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/of.h>
+
+struct rx51_device_info {
+	struct device *dev;
+	struct power_supply *bat;
+	struct power_supply_desc bat_desc;
+	struct iio_channel *channel_temp;
+	struct iio_channel *channel_bsi;
+	struct iio_channel *channel_vbat;
+};
+
+/*
+ * Read ADCIN channel value, code copied from maemo kernel
+ */
+static int rx51_battery_read_adc(struct iio_channel *channel)
+{
+	int val, err;
+	err = iio_read_channel_average_raw(channel, &val);
+	if (err < 0)
+		return err;
+	return val;
+}
+
+/*
+ * Read ADCIN channel 12 (voltage) and convert RAW value to micro voltage
+ * This conversion formula was extracted from maemo program bsi-read
+ */
+static int rx51_battery_read_voltage(struct rx51_device_info *di)
+{
+	int voltage = rx51_battery_read_adc(di->channel_vbat);
+
+	if (voltage < 0) {
+		dev_err(di->dev, "Could not read ADC: %d\n", voltage);
+		return voltage;
+	}
+
+	return 1000 * (10000 * voltage / 1705);
+}
+
+/*
+ * Temperature look-up tables
+ * TEMP = (1/(t1 + 1/298) - 273.15)
+ * Where t1 = (1/B) * ln((RAW_ADC_U * 2.5)/(R * I * 255))
+ * Formula is based on experimental data, RX-51 CAL data, maemo program bme
+ * and formula from da9052 driver with values R = 100, B = 3380, I = 0.00671
+ */
+
+/*
+ * Table1 (temperature for first 25 RAW values)
+ * Usage: TEMP = rx51_temp_table1[RAW]
+ *   RAW is between 1 and 24
+ *   TEMP is between 201 C and 55 C
+ */
+static u8 rx51_temp_table1[] = {
+	255, 201, 159, 138, 124, 114, 106,  99,  94,  89,  85,  82,  78,  75,
+	 73,  70,  68,  66,  64,  62,  61,  59,  57,  56,  55
+};
+
+/*
+ * Table2 (lowest RAW value for temperature)
+ * Usage: RAW = rx51_temp_table2[TEMP-rx51_temp_table2_first]
+ *   TEMP is between 53 C and -32 C
+ *   RAW is between 25 and 993
+ */
+#define rx51_temp_table2_first 53
+static u16 rx51_temp_table2[] = {
+	 25,  26,  27,  28,  29,  30,  31,  32,  33,  34,  35,  36,  37,  39,
+	 40,  41,  43,  44,  46,  48,  49,  51,  53,  55,  57,  59,  61,  64,
+	 66,  69,  71,  74,  77,  80,  83,  86,  90,  94,  97, 101, 106, 110,
+	115, 119, 125, 130, 136, 141, 148, 154, 161, 168, 176, 184, 202, 211,
+	221, 231, 242, 254, 266, 279, 293, 308, 323, 340, 357, 375, 395, 415,
+	437, 460, 485, 511, 539, 568, 600, 633, 669, 706, 747, 790, 836, 885,
+	937, 993, 1024
+};
+
+/*
+ * Read ADCIN channel 0 (battery temp) and convert value to tenths of Celsius
+ * Use Temperature look-up tables for conversation
+ */
+static int rx51_battery_read_temperature(struct rx51_device_info *di)
+{
+	int min = 0;
+	int max = ARRAY_SIZE(rx51_temp_table2) - 1;
+	int raw = rx51_battery_read_adc(di->channel_temp);
+
+	if (raw < 0)
+		dev_err(di->dev, "Could not read ADC: %d\n", raw);
+
+	/* Zero and negative values are undefined */
+	if (raw <= 0)
+		return INT_MAX;
+
+	/* ADC channels are 10 bit, higher value are undefined */
+	if (raw >= (1 << 10))
+		return INT_MIN;
+
+	/* First check for temperature in first direct table */
+	if (raw < ARRAY_SIZE(rx51_temp_table1))
+		return rx51_temp_table1[raw] * 10;
+
+	/* Binary search RAW value in second inverse table */
+	while (max - min > 1) {
+		int mid = (max + min) / 2;
+		if (rx51_temp_table2[mid] <= raw)
+			min = mid;
+		else if (rx51_temp_table2[mid] > raw)
+			max = mid;
+		if (rx51_temp_table2[mid] == raw)
+			break;
+	}
+
+	return (rx51_temp_table2_first - min) * 10;
+}
+
+/*
+ * Read ADCIN channel 4 (BSI) and convert RAW value to micro Ah
+ * This conversion formula was extracted from maemo program bsi-read
+ */
+static int rx51_battery_read_capacity(struct rx51_device_info *di)
+{
+	int capacity = rx51_battery_read_adc(di->channel_bsi);
+
+	if (capacity < 0) {
+		dev_err(di->dev, "Could not read ADC: %d\n", capacity);
+		return capacity;
+	}
+
+	return 1280 * (1200 * capacity)/(1024 - capacity);
+}
+
+/*
+ * Return power_supply property
+ */
+static int rx51_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct rx51_device_info *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 4200000;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = rx51_battery_read_voltage(di) ? 1 : 0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = rx51_battery_read_voltage(di);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = rx51_battery_read_temperature(di);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = rx51_battery_read_capacity(di);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val->intval == INT_MAX || val->intval == INT_MIN)
+		return -EINVAL;
+
+	return 0;
+}
+
+static enum power_supply_property rx51_battery_props[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+};
+
+static int rx51_battery_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct rx51_device_info *di;
+	int ret;
+
+	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, di);
+
+	di->dev = &pdev->dev;
+	di->bat_desc.name = "rx51-battery";
+	di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	di->bat_desc.properties = rx51_battery_props;
+	di->bat_desc.num_properties = ARRAY_SIZE(rx51_battery_props);
+	di->bat_desc.get_property = rx51_battery_get_property;
+
+	psy_cfg.drv_data = di;
+
+	di->channel_temp = iio_channel_get(di->dev, "temp");
+	if (IS_ERR(di->channel_temp)) {
+		ret = PTR_ERR(di->channel_temp);
+		goto error;
+	}
+
+	di->channel_bsi  = iio_channel_get(di->dev, "bsi");
+	if (IS_ERR(di->channel_bsi)) {
+		ret = PTR_ERR(di->channel_bsi);
+		goto error_channel_temp;
+	}
+
+	di->channel_vbat = iio_channel_get(di->dev, "vbat");
+	if (IS_ERR(di->channel_vbat)) {
+		ret = PTR_ERR(di->channel_vbat);
+		goto error_channel_bsi;
+	}
+
+	di->bat = power_supply_register(di->dev, &di->bat_desc, &psy_cfg);
+	if (IS_ERR(di->bat)) {
+		ret = PTR_ERR(di->bat);
+		goto error_channel_vbat;
+	}
+
+	return 0;
+
+error_channel_vbat:
+	iio_channel_release(di->channel_vbat);
+error_channel_bsi:
+	iio_channel_release(di->channel_bsi);
+error_channel_temp:
+	iio_channel_release(di->channel_temp);
+error:
+
+	return ret;
+}
+
+static int rx51_battery_remove(struct platform_device *pdev)
+{
+	struct rx51_device_info *di = platform_get_drvdata(pdev);
+
+	power_supply_unregister(di->bat);
+
+	iio_channel_release(di->channel_vbat);
+	iio_channel_release(di->channel_bsi);
+	iio_channel_release(di->channel_temp);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id n900_battery_of_match[] = {
+	{.compatible = "nokia,n900-battery", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, n900_battery_of_match);
+#endif
+
+static struct platform_driver rx51_battery_driver = {
+	.probe = rx51_battery_probe,
+	.remove = rx51_battery_remove,
+	.driver = {
+		.name = "rx51-battery",
+		.of_match_table = of_match_ptr(n900_battery_of_match),
+	},
+};
+module_platform_driver(rx51_battery_driver);
+
+MODULE_ALIAS("platform:rx51-battery");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("Nokia RX-51 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
new file mode 100644
index 000000000..68d31a3be
--- /dev/null
+++ b/drivers/power/supply/s3c_adc_battery.c
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// iPAQ h1930/h1940/rx1950 battery controller driver
+// Copyright (c) Vasily Khoruzhick
+// Based on h1940_battery.c by Arnaud Patard
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/leds.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <linux/soc/samsung/s3c-adc.h>
+
+#define BAT_POLL_INTERVAL		10000 /* ms */
+#define JITTER_DELAY			500 /* ms */
+
+struct s3c_adc_bat {
+	struct power_supply		*psy;
+	struct s3c_adc_client		*client;
+	struct s3c_adc_bat_pdata	*pdata;
+	struct gpio_desc		*charge_finished;
+	int				volt_value;
+	int				cur_value;
+	unsigned int			timestamp;
+	int				level;
+	int				status;
+	int				cable_plugged:1;
+};
+
+static struct delayed_work bat_work;
+
+static void s3c_adc_bat_ext_power_changed(struct power_supply *psy)
+{
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+}
+
+static int gather_samples(struct s3c_adc_client *client, int num, int channel)
+{
+	int value, i;
+
+	/* default to 1 if nothing is set */
+	if (num < 1)
+		num = 1;
+
+	value = 0;
+	for (i = 0; i < num; i++)
+		value += s3c_adc_read(client, channel);
+	value /= num;
+
+	return value;
+}
+
+static enum power_supply_property s3c_adc_backup_bat_props[] = {
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int s3c_adc_backup_bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct s3c_adc_bat *bat = power_supply_get_drvdata(psy);
+
+	if (!bat) {
+		dev_err(&psy->dev, "%s: no battery infos ?!\n", __func__);
+		return -EINVAL;
+	}
+
+	if (bat->volt_value < 0 ||
+		jiffies_to_msecs(jiffies - bat->timestamp) >
+			BAT_POLL_INTERVAL) {
+		bat->volt_value = gather_samples(bat->client,
+			bat->pdata->backup_volt_samples,
+			bat->pdata->backup_volt_channel);
+		bat->volt_value *= bat->pdata->backup_volt_mult;
+		bat->timestamp = jiffies;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = bat->volt_value;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		val->intval = bat->pdata->backup_volt_min;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->pdata->backup_volt_max;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct power_supply_desc backup_bat_desc = {
+	.name		= "backup-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= s3c_adc_backup_bat_props,
+	.num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props),
+	.get_property	= s3c_adc_backup_bat_get_property,
+	.use_for_apm	= 1,
+};
+
+static struct s3c_adc_bat backup_bat;
+
+static enum power_supply_property s3c_adc_main_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int calc_full_volt(int volt_val, int cur_val, int impedance)
+{
+	return volt_val + cur_val * impedance / 1000;
+}
+
+static int charge_finished(struct s3c_adc_bat *bat)
+{
+	return gpiod_get_value(bat->charge_finished);
+}
+
+static int s3c_adc_bat_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct s3c_adc_bat *bat = power_supply_get_drvdata(psy);
+
+	int new_level;
+	int full_volt;
+	const struct s3c_adc_bat_thresh *lut;
+	unsigned int lut_size;
+
+	if (!bat) {
+		dev_err(&psy->dev, "no battery infos ?!\n");
+		return -EINVAL;
+	}
+
+	lut = bat->pdata->lut_noac;
+	lut_size = bat->pdata->lut_noac_cnt;
+
+	if (bat->volt_value < 0 || bat->cur_value < 0 ||
+		jiffies_to_msecs(jiffies - bat->timestamp) >
+			BAT_POLL_INTERVAL) {
+		bat->volt_value = gather_samples(bat->client,
+			bat->pdata->volt_samples,
+			bat->pdata->volt_channel) * bat->pdata->volt_mult;
+		bat->cur_value = gather_samples(bat->client,
+			bat->pdata->current_samples,
+			bat->pdata->current_channel) * bat->pdata->current_mult;
+		bat->timestamp = jiffies;
+	}
+
+	if (bat->cable_plugged &&
+		(!bat->charge_finished ||
+		!charge_finished(bat))) {
+		lut = bat->pdata->lut_acin;
+		lut_size = bat->pdata->lut_acin_cnt;
+	}
+
+	new_level = 100000;
+	full_volt = calc_full_volt((bat->volt_value / 1000),
+		(bat->cur_value / 1000), bat->pdata->internal_impedance);
+
+	if (full_volt < calc_full_volt(lut->volt, lut->cur,
+		bat->pdata->internal_impedance)) {
+		lut_size--;
+		while (lut_size--) {
+			int lut_volt1;
+			int lut_volt2;
+
+			lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur,
+				bat->pdata->internal_impedance);
+			lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur,
+				bat->pdata->internal_impedance);
+			if (full_volt < lut_volt1 && full_volt >= lut_volt2) {
+				new_level = (lut[1].level +
+					(lut[0].level - lut[1].level) *
+					(full_volt - lut_volt2) /
+					(lut_volt1 - lut_volt2)) * 1000;
+				break;
+			}
+			new_level = lut[1].level * 1000;
+			lut++;
+		}
+	}
+
+	bat->level = new_level;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!bat->charge_finished)
+			val->intval = bat->level == 100000 ?
+				POWER_SUPPLY_STATUS_FULL : bat->status;
+		else
+			val->intval = bat->status;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 100000;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+		val->intval = 0;
+		return 0;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = bat->level;
+		return 0;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = bat->volt_value;
+		return 0;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = bat->cur_value;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct power_supply_desc main_bat_desc = {
+	.name			= "main-battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= s3c_adc_main_bat_props,
+	.num_properties		= ARRAY_SIZE(s3c_adc_main_bat_props),
+	.get_property		= s3c_adc_bat_get_property,
+	.external_power_changed = s3c_adc_bat_ext_power_changed,
+	.use_for_apm		= 1,
+};
+
+static struct s3c_adc_bat main_bat;
+
+static void s3c_adc_bat_work(struct work_struct *work)
+{
+	struct s3c_adc_bat *bat = &main_bat;
+	int is_charged;
+	int is_plugged;
+	static int was_plugged;
+
+	is_plugged = power_supply_am_i_supplied(bat->psy);
+	bat->cable_plugged = is_plugged;
+	if (is_plugged != was_plugged) {
+		was_plugged = is_plugged;
+		if (is_plugged) {
+			if (bat->pdata->enable_charger)
+				bat->pdata->enable_charger();
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		} else {
+			if (bat->pdata->disable_charger)
+				bat->pdata->disable_charger();
+			bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+	} else {
+		if (bat->charge_finished && is_plugged) {
+			is_charged = charge_finished(&main_bat);
+			if (is_charged) {
+				if (bat->pdata->disable_charger)
+					bat->pdata->disable_charger();
+				bat->status = POWER_SUPPLY_STATUS_FULL;
+			} else {
+				if (bat->pdata->enable_charger)
+					bat->pdata->enable_charger();
+				bat->status = POWER_SUPPLY_STATUS_CHARGING;
+			}
+		}
+	}
+
+	power_supply_changed(bat->psy);
+}
+
+static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id)
+{
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+	return IRQ_HANDLED;
+}
+
+static int s3c_adc_bat_probe(struct platform_device *pdev)
+{
+	struct s3c_adc_client	*client;
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+	struct gpio_desc *gpiod;
+	int ret;
+
+	client = s3c_adc_register(pdev, NULL, NULL, 0);
+	if (IS_ERR(client)) {
+		dev_err(&pdev->dev, "cannot register adc\n");
+		return PTR_ERR(client);
+	}
+
+	platform_set_drvdata(pdev, client);
+
+	gpiod = devm_gpiod_get_optional(&pdev->dev, "charge-status", GPIOD_IN);
+	if (IS_ERR(gpiod)) {
+		/* Could be probe deferral etc */
+		ret = PTR_ERR(gpiod);
+		dev_err(&pdev->dev, "no GPIO %d\n", ret);
+		return ret;
+	}
+
+	main_bat.client = client;
+	main_bat.pdata = pdata;
+	main_bat.charge_finished = gpiod;
+	main_bat.volt_value = -1;
+	main_bat.cur_value = -1;
+	main_bat.cable_plugged = 0;
+	main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING;
+	psy_cfg.drv_data = &main_bat;
+
+	main_bat.psy = power_supply_register(&pdev->dev, &main_bat_desc, &psy_cfg);
+	if (IS_ERR(main_bat.psy)) {
+		ret = PTR_ERR(main_bat.psy);
+		goto err_reg_main;
+	}
+	if (pdata->backup_volt_mult) {
+		const struct power_supply_config backup_psy_cfg
+						= { .drv_data = &backup_bat, };
+
+		backup_bat.client = client;
+		backup_bat.pdata = pdev->dev.platform_data;
+		backup_bat.charge_finished = gpiod;
+		backup_bat.volt_value = -1;
+		backup_bat.psy = power_supply_register(&pdev->dev,
+						       &backup_bat_desc,
+						       &backup_psy_cfg);
+		if (IS_ERR(backup_bat.psy)) {
+			ret = PTR_ERR(backup_bat.psy);
+			goto err_reg_backup;
+		}
+	}
+
+	INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work);
+
+	if (gpiod) {
+		ret = request_irq(gpiod_to_irq(gpiod),
+				s3c_adc_bat_charged,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"battery charged", NULL);
+		if (ret)
+			goto err_irq;
+	}
+
+	if (pdata->init) {
+		ret = pdata->init();
+		if (ret)
+			goto err_platform;
+	}
+
+	dev_info(&pdev->dev, "successfully loaded\n");
+	device_init_wakeup(&pdev->dev, 1);
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+
+	return 0;
+
+err_platform:
+	if (gpiod)
+		free_irq(gpiod_to_irq(gpiod), NULL);
+err_irq:
+	if (pdata->backup_volt_mult)
+		power_supply_unregister(backup_bat.psy);
+err_reg_backup:
+	power_supply_unregister(main_bat.psy);
+err_reg_main:
+	return ret;
+}
+
+static int s3c_adc_bat_remove(struct platform_device *pdev)
+{
+	struct s3c_adc_client *client = platform_get_drvdata(pdev);
+	struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+	power_supply_unregister(main_bat.psy);
+	if (pdata->backup_volt_mult)
+		power_supply_unregister(backup_bat.psy);
+
+	s3c_adc_release(client);
+
+	if (main_bat.charge_finished)
+		free_irq(gpiod_to_irq(main_bat.charge_finished), NULL);
+
+	cancel_delayed_work_sync(&bat_work);
+
+	if (pdata->exit)
+		pdata->exit();
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_bat_suspend(struct platform_device *pdev,
+	pm_message_t state)
+{
+	if (main_bat.charge_finished) {
+		if (device_may_wakeup(&pdev->dev))
+			enable_irq_wake(
+				gpiod_to_irq(main_bat.charge_finished));
+		else {
+			disable_irq(gpiod_to_irq(main_bat.charge_finished));
+			main_bat.pdata->disable_charger();
+		}
+	}
+
+	return 0;
+}
+
+static int s3c_adc_bat_resume(struct platform_device *pdev)
+{
+	if (main_bat.charge_finished) {
+		if (device_may_wakeup(&pdev->dev))
+			disable_irq_wake(
+				gpiod_to_irq(main_bat.charge_finished));
+		else
+			enable_irq(gpiod_to_irq(main_bat.charge_finished));
+	}
+
+	/* Schedule timer to check current status */
+	schedule_delayed_work(&bat_work,
+		msecs_to_jiffies(JITTER_DELAY));
+
+	return 0;
+}
+#else
+#define s3c_adc_bat_suspend NULL
+#define s3c_adc_bat_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_bat_driver = {
+	.driver		= {
+		.name	= "s3c-adc-battery",
+	},
+	.probe		= s3c_adc_bat_probe,
+	.remove		= s3c_adc_bat_remove,
+	.suspend	= s3c_adc_bat_suspend,
+	.resume		= s3c_adc_bat_resume,
+};
+
+module_platform_driver(s3c_adc_bat_driver);
+
+MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/samsung-sdi-battery.c b/drivers/power/supply/samsung-sdi-battery.c
new file mode 100644
index 000000000..b33daab79
--- /dev/null
+++ b/drivers/power/supply/samsung-sdi-battery.c
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Battery data and characteristics for Samsung SDI (Samsung Digital Interface)
+ * batteries. The data is retrieved automatically into drivers using
+ * the power_supply_get_battery_info() call.
+ *
+ * The BTI (battery type indicator) resistance in the code drops was very
+ * unreliable. The resistance listed here was obtained by simply measuring
+ * the BTI resistance with a multimeter on the battery.
+ */
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include "samsung-sdi-battery.h"
+
+struct samsung_sdi_battery {
+	char *compatible;
+	char *name;
+	struct power_supply_battery_info info;
+};
+
+/*
+ * Voltage to internal resistance tables. The internal resistance varies
+ * depending on the VBAT voltage, so look this up from a table. Different
+ * tables apply depending on whether we are charging or not.
+ */
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb_l1m7flu[] = {
+	{ .vbat_uv = 4240000, .ri_uohm = 160000 },
+	{ .vbat_uv = 4210000, .ri_uohm = 179000 },
+	{ .vbat_uv = 4180000, .ri_uohm = 183000 },
+	{ .vbat_uv = 4160000, .ri_uohm = 184000 },
+	{ .vbat_uv = 4140000, .ri_uohm = 191000 },
+	{ .vbat_uv = 4120000, .ri_uohm = 204000 },
+	{ .vbat_uv = 4076000, .ri_uohm = 220000 },
+	{ .vbat_uv = 4030000, .ri_uohm = 227000 },
+	{ .vbat_uv = 3986000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3916000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3842000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3773000, .ri_uohm = 287000 },
+	{ .vbat_uv = 3742000, .ri_uohm = 283000 },
+	{ .vbat_uv = 3709000, .ri_uohm = 277000 },
+	{ .vbat_uv = 3685000, .ri_uohm = 297000 },
+	{ .vbat_uv = 3646000, .ri_uohm = 310000 },
+	{ .vbat_uv = 3616000, .ri_uohm = 331000 },
+	{ .vbat_uv = 3602000, .ri_uohm = 370000 },
+	{ .vbat_uv = 3578000, .ri_uohm = 350000 },
+	{ .vbat_uv = 3553000, .ri_uohm = 321000 },
+	{ .vbat_uv = 3503000, .ri_uohm = 322000 },
+	{ .vbat_uv = 3400000, .ri_uohm = 269000 },
+	{ .vbat_uv = 3360000, .ri_uohm = 328000 },
+	{ .vbat_uv = 3330000, .ri_uohm = 305000 },
+	{ .vbat_uv = 3300000, .ri_uohm = 339000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb_l1m7flu[] = {
+	{ .vbat_uv = 4302000, .ri_uohm = 230000 },
+	{ .vbat_uv = 4276000, .ri_uohm = 345000 },
+	{ .vbat_uv = 4227000, .ri_uohm = 345000 },
+	{ .vbat_uv = 4171000, .ri_uohm = 346000 },
+	{ .vbat_uv = 4134000, .ri_uohm = 311000 },
+	{ .vbat_uv = 4084000, .ri_uohm = 299000 },
+	{ .vbat_uv = 4052000, .ri_uohm = 316000 },
+	{ .vbat_uv = 4012000, .ri_uohm = 309000 },
+	{ .vbat_uv = 3961000, .ri_uohm = 303000 },
+	{ .vbat_uv = 3939000, .ri_uohm = 280000 },
+	{ .vbat_uv = 3904000, .ri_uohm = 261000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 232000 },
+	{ .vbat_uv = 3750000, .ri_uohm = 177000 },
+	{ .vbat_uv = 3712000, .ri_uohm = 164000 },
+	{ .vbat_uv = 3674000, .ri_uohm = 161000 },
+	{ .vbat_uv = 3590000, .ri_uohm = 164000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb425161la[] = {
+	{ .vbat_uv = 4240000, .ri_uohm = 160000 },
+	{ .vbat_uv = 4210000, .ri_uohm = 179000 },
+	{ .vbat_uv = 4180000, .ri_uohm = 183000 },
+	{ .vbat_uv = 4160000, .ri_uohm = 184000 },
+	{ .vbat_uv = 4140000, .ri_uohm = 191000 },
+	{ .vbat_uv = 4120000, .ri_uohm = 204000 },
+	{ .vbat_uv = 4080000, .ri_uohm = 200000 },
+	{ .vbat_uv = 4027000, .ri_uohm = 202000 },
+	{ .vbat_uv = 3916000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3842000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 262000 },
+	{ .vbat_uv = 3742000, .ri_uohm = 263000 },
+	{ .vbat_uv = 3709000, .ri_uohm = 277000 },
+	{ .vbat_uv = 3685000, .ri_uohm = 312000 },
+	{ .vbat_uv = 3668000, .ri_uohm = 258000 },
+	{ .vbat_uv = 3660000, .ri_uohm = 247000 },
+	{ .vbat_uv = 3636000, .ri_uohm = 293000 },
+	{ .vbat_uv = 3616000, .ri_uohm = 331000 },
+	{ .vbat_uv = 3600000, .ri_uohm = 349000 },
+	{ .vbat_uv = 3593000, .ri_uohm = 345000 },
+	{ .vbat_uv = 3585000, .ri_uohm = 344000 },
+	{ .vbat_uv = 3572000, .ri_uohm = 336000 },
+	{ .vbat_uv = 3553000, .ri_uohm = 321000 },
+	{ .vbat_uv = 3517000, .ri_uohm = 336000 },
+	{ .vbat_uv = 3503000, .ri_uohm = 322000 },
+	{ .vbat_uv = 3400000, .ri_uohm = 269000 },
+	{ .vbat_uv = 3360000, .ri_uohm = 328000 },
+	{ .vbat_uv = 3330000, .ri_uohm = 305000 },
+	{ .vbat_uv = 3300000, .ri_uohm = 339000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb425161la[] = {
+	{ .vbat_uv = 4345000, .ri_uohm = 230000 },
+	{ .vbat_uv = 4329000, .ri_uohm = 238000 },
+	{ .vbat_uv = 4314000, .ri_uohm = 225000 },
+	{ .vbat_uv = 4311000, .ri_uohm = 239000 },
+	{ .vbat_uv = 4294000, .ri_uohm = 235000 },
+	{ .vbat_uv = 4264000, .ri_uohm = 229000 },
+	{ .vbat_uv = 4262000, .ri_uohm = 228000 },
+	{ .vbat_uv = 4252000, .ri_uohm = 236000 },
+	{ .vbat_uv = 4244000, .ri_uohm = 234000 },
+	{ .vbat_uv = 4235000, .ri_uohm = 234000 },
+	{ .vbat_uv = 4227000, .ri_uohm = 238000 },
+	{ .vbat_uv = 4219000, .ri_uohm = 242000 },
+	{ .vbat_uv = 4212000, .ri_uohm = 239000 },
+	{ .vbat_uv = 4206000, .ri_uohm = 231000 },
+	{ .vbat_uv = 4201000, .ri_uohm = 231000 },
+	{ .vbat_uv = 4192000, .ri_uohm = 224000 },
+	{ .vbat_uv = 4184000, .ri_uohm = 238000 },
+	{ .vbat_uv = 4173000, .ri_uohm = 245000 },
+	{ .vbat_uv = 4161000, .ri_uohm = 244000 },
+	{ .vbat_uv = 4146000, .ri_uohm = 244000 },
+	{ .vbat_uv = 4127000, .ri_uohm = 228000 },
+	{ .vbat_uv = 4119000, .ri_uohm = 218000 },
+	{ .vbat_uv = 4112000, .ri_uohm = 215000 },
+	{ .vbat_uv = 4108000, .ri_uohm = 209000 },
+	{ .vbat_uv = 4102000, .ri_uohm = 214000 },
+	{ .vbat_uv = 4096000, .ri_uohm = 215000 },
+	{ .vbat_uv = 4090000, .ri_uohm = 215000 },
+	{ .vbat_uv = 4083000, .ri_uohm = 219000 },
+	{ .vbat_uv = 4078000, .ri_uohm = 208000 },
+	{ .vbat_uv = 4071000, .ri_uohm = 205000 },
+	{ .vbat_uv = 4066000, .ri_uohm = 208000 },
+	{ .vbat_uv = 4061000, .ri_uohm = 210000 },
+	{ .vbat_uv = 4055000, .ri_uohm = 212000 },
+	{ .vbat_uv = 4049000, .ri_uohm = 215000 },
+	{ .vbat_uv = 4042000, .ri_uohm = 212000 },
+	{ .vbat_uv = 4032000, .ri_uohm = 217000 },
+	{ .vbat_uv = 4027000, .ri_uohm = 220000 },
+	{ .vbat_uv = 4020000, .ri_uohm = 210000 },
+	{ .vbat_uv = 4013000, .ri_uohm = 214000 },
+	{ .vbat_uv = 4007000, .ri_uohm = 219000 },
+	{ .vbat_uv = 4003000, .ri_uohm = 229000 },
+	{ .vbat_uv = 3996000, .ri_uohm = 246000 },
+	{ .vbat_uv = 3990000, .ri_uohm = 245000 },
+	{ .vbat_uv = 3984000, .ri_uohm = 242000 },
+	{ .vbat_uv = 3977000, .ri_uohm = 236000 },
+	{ .vbat_uv = 3971000, .ri_uohm = 231000 },
+	{ .vbat_uv = 3966000, .ri_uohm = 229000 },
+	{ .vbat_uv = 3952000, .ri_uohm = 226000 },
+	{ .vbat_uv = 3946000, .ri_uohm = 222000 },
+	{ .vbat_uv = 3941000, .ri_uohm = 222000 },
+	{ .vbat_uv = 3936000, .ri_uohm = 217000 },
+	{ .vbat_uv = 3932000, .ri_uohm = 217000 },
+	{ .vbat_uv = 3928000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3926000, .ri_uohm = 214000 },
+	{ .vbat_uv = 3922000, .ri_uohm = 209000 },
+	{ .vbat_uv = 3917000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3914000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3912000, .ri_uohm = 220000 },
+	{ .vbat_uv = 3910000, .ri_uohm = 226000 },
+	{ .vbat_uv = 3903000, .ri_uohm = 226000 },
+	{ .vbat_uv = 3891000, .ri_uohm = 222000 },
+	{ .vbat_uv = 3871000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3857000, .ri_uohm = 219000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 216000 },
+	{ .vbat_uv = 3843000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3835000, .ri_uohm = 206000 },
+	{ .vbat_uv = 3825000, .ri_uohm = 217000 },
+	{ .vbat_uv = 3824000, .ri_uohm = 220000 },
+	{ .vbat_uv = 3820000, .ri_uohm = 237000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 232000 },
+	{ .vbat_uv = 3750000, .ri_uohm = 177000 },
+	{ .vbat_uv = 3712000, .ri_uohm = 164000 },
+	{ .vbat_uv = 3674000, .ri_uohm = 161000 },
+	{ .vbat_uv = 3590000, .ri_uohm = 164000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb425161lu[] = {
+	{ .vbat_uv = 4240000, .ri_uohm = 160000 },
+	{ .vbat_uv = 4210000, .ri_uohm = 179000 },
+	{ .vbat_uv = 4180000, .ri_uohm = 183000 },
+	{ .vbat_uv = 4160000, .ri_uohm = 184000 },
+	{ .vbat_uv = 4140000, .ri_uohm = 191000 },
+	{ .vbat_uv = 4120000, .ri_uohm = 204000 },
+	{ .vbat_uv = 4080000, .ri_uohm = 200000 },
+	{ .vbat_uv = 4027000, .ri_uohm = 202000 },
+	{ .vbat_uv = 3916000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3842000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 262000 },
+	{ .vbat_uv = 3742000, .ri_uohm = 263000 },
+	{ .vbat_uv = 3708000, .ri_uohm = 277000 },
+	{ .vbat_uv = 3684000, .ri_uohm = 272000 },
+	{ .vbat_uv = 3664000, .ri_uohm = 278000 },
+	{ .vbat_uv = 3655000, .ri_uohm = 285000 },
+	{ .vbat_uv = 3638000, .ri_uohm = 261000 },
+	{ .vbat_uv = 3624000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3616000, .ri_uohm = 266000 },
+	{ .vbat_uv = 3597000, .ri_uohm = 278000 },
+	{ .vbat_uv = 3581000, .ri_uohm = 281000 },
+	{ .vbat_uv = 3560000, .ri_uohm = 287000 },
+	{ .vbat_uv = 3527000, .ri_uohm = 289000 },
+	{ .vbat_uv = 3512000, .ri_uohm = 286000 },
+	{ .vbat_uv = 3494000, .ri_uohm = 282000 },
+	{ .vbat_uv = 3400000, .ri_uohm = 269000 },
+	{ .vbat_uv = 3360000, .ri_uohm = 328000 },
+	{ .vbat_uv = 3330000, .ri_uohm = 305000 },
+	{ .vbat_uv = 3300000, .ri_uohm = 339000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb425161lu[] = {
+	{ .vbat_uv = 4346000, .ri_uohm = 293000 },
+	{ .vbat_uv = 4336000, .ri_uohm = 290000 },
+	{ .vbat_uv = 4315000, .ri_uohm = 274000 },
+	{ .vbat_uv = 4310000, .ri_uohm = 264000 },
+	{ .vbat_uv = 4275000, .ri_uohm = 275000 },
+	{ .vbat_uv = 4267000, .ri_uohm = 274000 },
+	{ .vbat_uv = 4227000, .ri_uohm = 262000 },
+	{ .vbat_uv = 4186000, .ri_uohm = 282000 },
+	{ .vbat_uv = 4136000, .ri_uohm = 246000 },
+	{ .vbat_uv = 4110000, .ri_uohm = 242000 },
+	{ .vbat_uv = 4077000, .ri_uohm = 249000 },
+	{ .vbat_uv = 4049000, .ri_uohm = 238000 },
+	{ .vbat_uv = 4017000, .ri_uohm = 268000 },
+	{ .vbat_uv = 3986000, .ri_uohm = 261000 },
+	{ .vbat_uv = 3962000, .ri_uohm = 252000 },
+	{ .vbat_uv = 3940000, .ri_uohm = 235000 },
+	{ .vbat_uv = 3930000, .ri_uohm = 237000 },
+	{ .vbat_uv = 3924000, .ri_uohm = 255000 },
+	{ .vbat_uv = 3910000, .ri_uohm = 244000 },
+	{ .vbat_uv = 3889000, .ri_uohm = 231000 },
+	{ .vbat_uv = 3875000, .ri_uohm = 249000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 232000 },
+	{ .vbat_uv = 3750000, .ri_uohm = 177000 },
+	{ .vbat_uv = 3712000, .ri_uohm = 164000 },
+	{ .vbat_uv = 3674000, .ri_uohm = 161000 },
+	{ .vbat_uv = 3590000, .ri_uohm = 164000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb485159lu[] = {
+	{ .vbat_uv = 4240000, .ri_uohm = 160000 },
+	{ .vbat_uv = 4210000, .ri_uohm = 179000 },
+	{ .vbat_uv = 4180000, .ri_uohm = 183000 },
+	{ .vbat_uv = 4160000, .ri_uohm = 184000 },
+	{ .vbat_uv = 4140000, .ri_uohm = 191000 },
+	{ .vbat_uv = 4120000, .ri_uohm = 204000 },
+	{ .vbat_uv = 4080000, .ri_uohm = 200000 },
+	{ .vbat_uv = 4027000, .ri_uohm = 202000 },
+	{ .vbat_uv = 3916000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3842000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 262000 },
+	{ .vbat_uv = 3715000, .ri_uohm = 340000 },
+	{ .vbat_uv = 3700000, .ri_uohm = 300000 },
+	{ .vbat_uv = 3682000, .ri_uohm = 233000 },
+	{ .vbat_uv = 3655000, .ri_uohm = 246000 },
+	{ .vbat_uv = 3639000, .ri_uohm = 260000 },
+	{ .vbat_uv = 3621000, .ri_uohm = 254000 },
+	{ .vbat_uv = 3583000, .ri_uohm = 266000 },
+	{ .vbat_uv = 3536000, .ri_uohm = 274000 },
+	{ .vbat_uv = 3502000, .ri_uohm = 300000 },
+	{ .vbat_uv = 3465000, .ri_uohm = 245000 },
+	{ .vbat_uv = 3438000, .ri_uohm = 225000 },
+	{ .vbat_uv = 3330000, .ri_uohm = 305000 },
+	{ .vbat_uv = 3300000, .ri_uohm = 339000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb485159lu[] = {
+	{ .vbat_uv = 4302000, .ri_uohm = 200000 },
+	{ .vbat_uv = 4258000, .ri_uohm = 206000 },
+	{ .vbat_uv = 4200000, .ri_uohm = 231000 },
+	{ .vbat_uv = 4150000, .ri_uohm = 198000 },
+	{ .vbat_uv = 4134000, .ri_uohm = 268000 },
+	{ .vbat_uv = 4058000, .ri_uohm = 172000 },
+	{ .vbat_uv = 4003000, .ri_uohm = 227000 },
+	{ .vbat_uv = 3972000, .ri_uohm = 241000 },
+	{ .vbat_uv = 3953000, .ri_uohm = 244000 },
+	{ .vbat_uv = 3950000, .ri_uohm = 213000 },
+	{ .vbat_uv = 3900000, .ri_uohm = 225000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 232000 },
+	{ .vbat_uv = 3750000, .ri_uohm = 177000 },
+	{ .vbat_uv = 3712000, .ri_uohm = 164000 },
+	{ .vbat_uv = 3674000, .ri_uohm = 161000 },
+	{ .vbat_uv = 3590000, .ri_uohm = 164000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb535151vu[] = {
+	{ .vbat_uv = 4071000, .ri_uohm = 158000 },
+	{ .vbat_uv = 4019000, .ri_uohm = 187000 },
+	{ .vbat_uv = 3951000, .ri_uohm = 191000 },
+	{ .vbat_uv = 3901000, .ri_uohm = 193000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 273000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 305000 },
+	{ .vbat_uv = 3750000, .ri_uohm = 205000 },
+	{ .vbat_uv = 3700000, .ri_uohm = 290000 },
+	{ .vbat_uv = 3650000, .ri_uohm = 262000 },
+	{ .vbat_uv = 3618000, .ri_uohm = 290000 },
+	{ .vbat_uv = 3505000, .ri_uohm = 235000 },
+	{ .vbat_uv = 3484000, .ri_uohm = 253000 },
+	{ .vbat_uv = 3413000, .ri_uohm = 243000 },
+	{ .vbat_uv = 3393000, .ri_uohm = 285000 },
+	{ .vbat_uv = 3361000, .ri_uohm = 281000 },
+	{ .vbat_uv = 3302000, .ri_uohm = 286000 },
+	{ .vbat_uv = 3280000, .ri_uohm = 250000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb535151vu[] = {
+	{ .vbat_uv = 4190000, .ri_uohm = 214000 },
+	{ .vbat_uv = 4159000, .ri_uohm = 252000 },
+	{ .vbat_uv = 4121000, .ri_uohm = 245000 },
+	{ .vbat_uv = 4069000, .ri_uohm = 228000 },
+	{ .vbat_uv = 4046000, .ri_uohm = 229000 },
+	{ .vbat_uv = 4026000, .ri_uohm = 233000 },
+	{ .vbat_uv = 4007000, .ri_uohm = 240000 },
+	{ .vbat_uv = 3982000, .ri_uohm = 291000 },
+	{ .vbat_uv = 3945000, .ri_uohm = 276000 },
+	{ .vbat_uv = 3924000, .ri_uohm = 266000 },
+	{ .vbat_uv = 3910000, .ri_uohm = 258000 },
+	{ .vbat_uv = 3900000, .ri_uohm = 271000 },
+	{ .vbat_uv = 3844000, .ri_uohm = 279000 },
+	{ .vbat_uv = 3772000, .ri_uohm = 217000 },
+	{ .vbat_uv = 3673000, .ri_uohm = 208000 },
+	{ .vbat_uv = 3571000, .ri_uohm = 208000 },
+	{ .vbat_uv = 3510000, .ri_uohm = 228000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_discharging_eb585157lu[] = {
+	{ .vbat_uv = 4194000, .ri_uohm = 121000 },
+	{ .vbat_uv = 4169000, .ri_uohm = 188000 },
+	{ .vbat_uv = 4136000, .ri_uohm = 173000 },
+	{ .vbat_uv = 4108000, .ri_uohm = 158000 },
+	{ .vbat_uv = 4064000, .ri_uohm = 143000 },
+	{ .vbat_uv = 3956000, .ri_uohm = 160000 },
+	{ .vbat_uv = 3847000, .ri_uohm = 262000 },
+	{ .vbat_uv = 3806000, .ri_uohm = 280000 },
+	{ .vbat_uv = 3801000, .ri_uohm = 266000 },
+	{ .vbat_uv = 3794000, .ri_uohm = 259000 },
+	{ .vbat_uv = 3785000, .ri_uohm = 234000 },
+	{ .vbat_uv = 3779000, .ri_uohm = 227000 },
+	{ .vbat_uv = 3772000, .ri_uohm = 222000 },
+	{ .vbat_uv = 3765000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3759000, .ri_uohm = 216000 },
+	{ .vbat_uv = 3754000, .ri_uohm = 206000 },
+	{ .vbat_uv = 3747000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3743000, .ri_uohm = 208000 },
+	{ .vbat_uv = 3737000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3733000, .ri_uohm = 200000 },
+	{ .vbat_uv = 3728000, .ri_uohm = 203000 },
+	{ .vbat_uv = 3722000, .ri_uohm = 207000 },
+	{ .vbat_uv = 3719000, .ri_uohm = 208000 },
+	{ .vbat_uv = 3715000, .ri_uohm = 209000 },
+	{ .vbat_uv = 3712000, .ri_uohm = 211000 },
+	{ .vbat_uv = 3709000, .ri_uohm = 210000 },
+	{ .vbat_uv = 3704000, .ri_uohm = 216000 },
+	{ .vbat_uv = 3701000, .ri_uohm = 218000 },
+	{ .vbat_uv = 3698000, .ri_uohm = 222000 },
+	{ .vbat_uv = 3694000, .ri_uohm = 218000 },
+	{ .vbat_uv = 3692000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3688000, .ri_uohm = 224000 },
+	{ .vbat_uv = 3686000, .ri_uohm = 224000 },
+	{ .vbat_uv = 3683000, .ri_uohm = 228000 },
+	{ .vbat_uv = 3681000, .ri_uohm = 228000 },
+	{ .vbat_uv = 3679000, .ri_uohm = 229000 },
+	{ .vbat_uv = 3676000, .ri_uohm = 232000 },
+	{ .vbat_uv = 3675000, .ri_uohm = 229000 },
+	{ .vbat_uv = 3673000, .ri_uohm = 229000 },
+	{ .vbat_uv = 3672000, .ri_uohm = 223000 },
+	{ .vbat_uv = 3669000, .ri_uohm = 224000 },
+	{ .vbat_uv = 3666000, .ri_uohm = 224000 },
+	{ .vbat_uv = 3663000, .ri_uohm = 221000 },
+	{ .vbat_uv = 3660000, .ri_uohm = 218000 },
+	{ .vbat_uv = 3657000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3654000, .ri_uohm = 212000 },
+	{ .vbat_uv = 3649000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3644000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3636000, .ri_uohm = 215000 },
+	{ .vbat_uv = 3631000, .ri_uohm = 206000 },
+	{ .vbat_uv = 3623000, .ri_uohm = 205000 },
+	{ .vbat_uv = 3616000, .ri_uohm = 193000 },
+	{ .vbat_uv = 3605000, .ri_uohm = 193000 },
+	{ .vbat_uv = 3600000, .ri_uohm = 198000 },
+	{ .vbat_uv = 3597000, .ri_uohm = 198000 },
+	{ .vbat_uv = 3592000, .ri_uohm = 203000 },
+	{ .vbat_uv = 3591000, .ri_uohm = 188000 },
+	{ .vbat_uv = 3587000, .ri_uohm = 188000 },
+	{ .vbat_uv = 3583000, .ri_uohm = 177000 },
+	{ .vbat_uv = 3577000, .ri_uohm = 170000 },
+	{ .vbat_uv = 3568000, .ri_uohm = 135000 },
+	{ .vbat_uv = 3552000, .ri_uohm = 54000 },
+	{ .vbat_uv = 3526000, .ri_uohm = 130000 },
+	{ .vbat_uv = 3501000, .ri_uohm = 48000 },
+	{ .vbat_uv = 3442000, .ri_uohm = 183000 },
+	{ .vbat_uv = 3326000, .ri_uohm = 372000 },
+	{ .vbat_uv = 3161000, .ri_uohm = 452000 },
+};
+
+static struct power_supply_vbat_ri_table samsung_vbat2res_charging_eb585157lu[] = {
+	{ .vbat_uv = 4360000, .ri_uohm = 128000 },
+	{ .vbat_uv = 4325000, .ri_uohm = 130000 },
+	{ .vbat_uv = 4316000, .ri_uohm = 148000 },
+	{ .vbat_uv = 4308000, .ri_uohm = 162000 },
+	{ .vbat_uv = 4301000, .ri_uohm = 162000 },
+	{ .vbat_uv = 4250000, .ri_uohm = 162000 },
+	{ .vbat_uv = 4230000, .ri_uohm = 164000 },
+	{ .vbat_uv = 4030000, .ri_uohm = 164000 },
+	{ .vbat_uv = 4000000, .ri_uohm = 193000 },
+	{ .vbat_uv = 3950000, .ri_uohm = 204000 },
+	{ .vbat_uv = 3850000, .ri_uohm = 210000 },
+	{ .vbat_uv = 3800000, .ri_uohm = 230000 },
+	{ .vbat_uv = 3790000, .ri_uohm = 240000 },
+	{ .vbat_uv = 3780000, .ri_uohm = 311000 },
+	{ .vbat_uv = 3760000, .ri_uohm = 420000 },
+	{ .vbat_uv = 3700000, .ri_uohm = 504000 },
+	{ .vbat_uv = 3600000, .ri_uohm = 565000 },
+};
+
+/*
+ * Temperature to internal resistance scaling tables.
+ *
+ * "resistance" is the percentage of the resistance determined from the voltage
+ * so this represents the capacity ratio at different temperatures.
+ *
+ * FIXME: the proper table is missing: Samsung does not provide the necessary
+ * temperature compensation tables so we just state 100% for every temperature.
+ * If you have the datasheets, please provide these tables.
+ */
+static struct power_supply_resistance_temp_table samsung_temp2res[] = {
+	{ .temp = 50, .resistance = 100 },
+	{ .temp = 40, .resistance = 100 },
+	{ .temp = 30, .resistance = 100 },
+	{ .temp = 20, .resistance = 100 },
+	{ .temp = 10, .resistance = 100 },
+	{ .temp = 00, .resistance = 100 },
+	{ .temp = -10, .resistance = 100 },
+	{ .temp = -20, .resistance = 100 },
+};
+
+/*
+ * Capacity tables for different Open Circuit Voltages (OCV).
+ * These must be sorted by falling OCV value.
+ */
+
+static struct power_supply_battery_ocv_table samsung_ocv_cap_eb485159lu[] = {
+	{ .ocv = 4330000, .capacity = 100},
+	{ .ocv = 4320000, .capacity = 99},
+	{ .ocv = 4283000, .capacity = 95},
+	{ .ocv = 4246000, .capacity = 92},
+	{ .ocv = 4211000, .capacity = 89},
+	{ .ocv = 4167000, .capacity = 85},
+	{ .ocv = 4146000, .capacity = 83},
+	{ .ocv = 4124000, .capacity = 81},
+	{ .ocv = 4062000, .capacity = 75},
+	{ .ocv = 4013000, .capacity = 70},
+	{ .ocv = 3977000, .capacity = 66},
+	{ .ocv = 3931000, .capacity = 60},
+	{ .ocv = 3914000, .capacity = 58},
+	{ .ocv = 3901000, .capacity = 57},
+	{ .ocv = 3884000, .capacity = 56},
+	{ .ocv = 3870000, .capacity = 55},
+	{ .ocv = 3862000, .capacity = 54},
+	{ .ocv = 3854000, .capacity = 53},
+	{ .ocv = 3838000, .capacity = 50},
+	{ .ocv = 3823000, .capacity = 47},
+	{ .ocv = 3813000, .capacity = 45},
+	{ .ocv = 3807000, .capacity = 43},
+	{ .ocv = 3800000, .capacity = 41},
+	{ .ocv = 3795000, .capacity = 40},
+	{ .ocv = 3786000, .capacity = 37},
+	{ .ocv = 3783000, .capacity = 35},
+	{ .ocv = 3773000, .capacity = 30},
+	{ .ocv = 3758000, .capacity = 25},
+	{ .ocv = 3745000, .capacity = 22},
+	{ .ocv = 3738000, .capacity = 20},
+	{ .ocv = 3733000, .capacity = 19},
+	{ .ocv = 3716000, .capacity = 17},
+	{ .ocv = 3709000, .capacity = 16},
+	{ .ocv = 3698000, .capacity = 15},
+	{ .ocv = 3687000, .capacity = 14},
+	{ .ocv = 3684000, .capacity = 13},
+	{ .ocv = 3684000, .capacity = 12},
+	{ .ocv = 3678000, .capacity = 10},
+	{ .ocv = 3671000, .capacity = 9},
+	{ .ocv = 3665000, .capacity = 8},
+	{ .ocv = 3651000, .capacity = 7},
+	{ .ocv = 3634000, .capacity = 6},
+	{ .ocv = 3601000, .capacity = 5},
+	{ .ocv = 3564000, .capacity = 4},
+	{ .ocv = 3516000, .capacity = 3},
+	{ .ocv = 3456000, .capacity = 2},
+	{ .ocv = 3381000, .capacity = 1},
+	{ .ocv = 3300000, .capacity = 0},
+};
+
+/* Same capacity table is used by eb-l1m7flu, eb425161la, eb425161lu */
+static struct power_supply_battery_ocv_table samsung_ocv_cap_1500mah[] = {
+	{ .ocv = 4328000, .capacity = 100},
+	{ .ocv = 4299000, .capacity = 99},
+	{ .ocv = 4281000, .capacity = 98},
+	{ .ocv = 4241000, .capacity = 95},
+	{ .ocv = 4183000, .capacity = 90},
+	{ .ocv = 4150000, .capacity = 87},
+	{ .ocv = 4116000, .capacity = 84},
+	{ .ocv = 4077000, .capacity = 80},
+	{ .ocv = 4068000, .capacity = 79},
+	{ .ocv = 4058000, .capacity = 77},
+	{ .ocv = 4026000, .capacity = 75},
+	{ .ocv = 3987000, .capacity = 72},
+	{ .ocv = 3974000, .capacity = 69},
+	{ .ocv = 3953000, .capacity = 66},
+	{ .ocv = 3933000, .capacity = 63},
+	{ .ocv = 3911000, .capacity = 60},
+	{ .ocv = 3900000, .capacity = 58},
+	{ .ocv = 3873000, .capacity = 55},
+	{ .ocv = 3842000, .capacity = 52},
+	{ .ocv = 3829000, .capacity = 50},
+	{ .ocv = 3810000, .capacity = 45},
+	{ .ocv = 3793000, .capacity = 40},
+	{ .ocv = 3783000, .capacity = 35},
+	{ .ocv = 3776000, .capacity = 30},
+	{ .ocv = 3762000, .capacity = 25},
+	{ .ocv = 3746000, .capacity = 20},
+	{ .ocv = 3739000, .capacity = 18},
+	{ .ocv = 3715000, .capacity = 15},
+	{ .ocv = 3700000, .capacity = 12},
+	{ .ocv = 3690000, .capacity = 10},
+	{ .ocv = 3680000, .capacity = 9},
+	{ .ocv = 3670000, .capacity = 7},
+	{ .ocv = 3656000, .capacity = 5},
+	{ .ocv = 3634000, .capacity = 4},
+	{ .ocv = 3614000, .capacity = 3},
+	{ .ocv = 3551000, .capacity = 2},
+	{ .ocv = 3458000, .capacity = 1},
+	{ .ocv = 3300000, .capacity = 0},
+};
+
+static struct power_supply_battery_ocv_table samsung_ocv_cap_eb535151vu[] = {
+	{ .ocv = 4178000, .capacity = 100},
+	{ .ocv = 4148000, .capacity = 99},
+	{ .ocv = 4105000, .capacity = 95},
+	{ .ocv = 4078000, .capacity = 92},
+	{ .ocv = 4057000, .capacity = 89},
+	{ .ocv = 4013000, .capacity = 85},
+	{ .ocv = 3988000, .capacity = 82},
+	{ .ocv = 3962000, .capacity = 77},
+	{ .ocv = 3920000, .capacity = 70},
+	{ .ocv = 3891000, .capacity = 65},
+	{ .ocv = 3874000, .capacity = 62},
+	{ .ocv = 3839000, .capacity = 59},
+	{ .ocv = 3816000, .capacity = 55},
+	{ .ocv = 3798000, .capacity = 50},
+	{ .ocv = 3778000, .capacity = 40},
+	{ .ocv = 3764000, .capacity = 30},
+	{ .ocv = 3743000, .capacity = 25},
+	{ .ocv = 3711000, .capacity = 20},
+	{ .ocv = 3691000, .capacity = 18},
+	{ .ocv = 3685000, .capacity = 15},
+	{ .ocv = 3680000, .capacity = 12},
+	{ .ocv = 3662000, .capacity = 10},
+	{ .ocv = 3638000, .capacity = 9},
+	{ .ocv = 3593000, .capacity = 7},
+	{ .ocv = 3566000, .capacity = 6},
+	{ .ocv = 3497000, .capacity = 4},
+	{ .ocv = 3405000, .capacity = 2},
+	{ .ocv = 3352000, .capacity = 1},
+	{ .ocv = 3300000, .capacity = 0},
+};
+
+static struct power_supply_battery_ocv_table samsung_ocv_cap_eb585157lu[] = {
+	{ .ocv = 4320000, .capacity = 100},
+	{ .ocv = 4296000, .capacity = 99},
+	{ .ocv = 4283000, .capacity = 98},
+	{ .ocv = 4245000, .capacity = 95},
+	{ .ocv = 4185000, .capacity = 90},
+	{ .ocv = 4152000, .capacity = 87},
+	{ .ocv = 4119000, .capacity = 84},
+	{ .ocv = 4077000, .capacity = 80},
+	{ .ocv = 4057000, .capacity = 78},
+	{ .ocv = 4048000, .capacity = 77},
+	{ .ocv = 4020000, .capacity = 74},
+	{ .ocv = 4003000, .capacity = 72},
+	{ .ocv = 3978000, .capacity = 69},
+	{ .ocv = 3955000, .capacity = 66},
+	{ .ocv = 3934000, .capacity = 63},
+	{ .ocv = 3912000, .capacity = 60},
+	{ .ocv = 3894000, .capacity = 58},
+	{ .ocv = 3860000, .capacity = 55},
+	{ .ocv = 3837000, .capacity = 52},
+	{ .ocv = 3827000, .capacity = 50},
+	{ .ocv = 3806000, .capacity = 45},
+	{ .ocv = 3791000, .capacity = 40},
+	{ .ocv = 3779000, .capacity = 35},
+	{ .ocv = 3770000, .capacity = 30},
+	{ .ocv = 3758000, .capacity = 25},
+	{ .ocv = 3739000, .capacity = 20},
+	{ .ocv = 3730000, .capacity = 18},
+	{ .ocv = 3706000, .capacity = 15},
+	{ .ocv = 3684000, .capacity = 13},
+	{ .ocv = 3675000, .capacity = 10},
+	{ .ocv = 3673000, .capacity = 9},
+	{ .ocv = 3665000, .capacity = 7},
+	{ .ocv = 3649000, .capacity = 5},
+	{ .ocv = 3628000, .capacity = 4},
+	{ .ocv = 3585000, .capacity = 3},
+	{ .ocv = 3525000, .capacity = 2},
+	{ .ocv = 3441000, .capacity = 1},
+	{ .ocv = 3300000, .capacity = 0},
+};
+
+static struct power_supply_maintenance_charge_table samsung_maint_charge_table[] = {
+	{
+		/* Maintenance charging phase A, 60 hours */
+		.charge_current_max_ua = 600000,
+		.charge_voltage_max_uv = 4150000,
+		.charge_safety_timer_minutes = 60*60,
+	},
+	{
+		/* Maintenance charging phase B, 200 hours */
+		.charge_current_max_ua = 600000,
+		.charge_voltage_max_uv = 4100000,
+		.charge_safety_timer_minutes = 200*60,
+	}
+};
+
+static struct samsung_sdi_battery samsung_sdi_batteries[] = {
+	{
+		/*
+		 * Used in Samsung GT-I8190 "Golden"
+		 * Data from vendor boardfile board-golden-[bm|battery].c
+		 */
+		.compatible = "samsung,eb-l1m7flu",
+		.name = "EB-L1M7FLU",
+		.info = {
+			.charge_full_design_uah = 1500000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 100000,
+			.factory_internal_resistance_charging_uohm = 200000,
+			/* If you have data on this fix the min_design_uv */
+			.voltage_min_design_uv = 3320000,
+			.voltage_max_design_uv = 4340000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 900000,
+			.constant_charge_voltage_max_uv = 4320000,
+			.charge_term_current_ua = 200000,
+			.charge_restart_voltage_uv = 4300000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -50,
+			.temp_alert_min = 0,
+			.temp_alert_max = 40,
+			.temp_max = 60,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_1500mah,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah),
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb_l1m7flu,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb_l1m7flu),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb_l1m7flu,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb_l1m7flu),
+			.bti_resistance_ohm = 2400,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+	{
+		/*
+		 * Used in Samsung SGH-T599 "Codina TMO" and SGH-I407 "Kyle"
+		 * Data from vendor boardfile board-kyle-[bm|battery].c
+		 */
+		.compatible = "samsung,eb425161la",
+		.name = "EB425161LA",
+		.info = {
+			.charge_full_design_uah = 1500000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 136000,
+			.factory_internal_resistance_charging_uohm = 200000,
+			/* If you have data on this fix the min_design_uv */
+			.voltage_min_design_uv = 3320000,
+			.voltage_max_design_uv = 4340000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 900000,
+			.constant_charge_voltage_max_uv = 4320000,
+			.charge_term_current_ua = 200000,
+			.charge_restart_voltage_uv = 4270000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -30,
+			.temp_alert_min = 0,
+			.temp_alert_max = 40,
+			.temp_max = 47,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_1500mah,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah),
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb425161la,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb425161la),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb425161la,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb425161la),
+			.bti_resistance_ohm = 2400,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+	{
+		/*
+		 * Used in Samsung GT-I8160 "Codina"
+		 * Data from vendor boardfile board-codina-[bm|battery].c
+		 */
+		.compatible = "samsung,eb425161lu",
+		.name = "EB425161LU",
+		.info = {
+			.charge_full_design_uah = 1500000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 100000,
+			.factory_internal_resistance_charging_uohm = 200000,
+			/* If you have data on this fix the min_design_uv */
+			.voltage_min_design_uv = 3320000,
+			.voltage_max_design_uv = 4350000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 900000,
+			.constant_charge_voltage_max_uv = 4340000,
+			.charge_term_current_ua = 200000,
+			.charge_restart_voltage_uv = 4280000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -50,
+			.temp_alert_min = 0,
+			.temp_alert_max = 43,
+			.temp_max = 49,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_1500mah,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_1500mah),
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb425161lu,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb425161lu),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb425161lu,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb425161lu),
+			.bti_resistance_ohm = 2400,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+	{
+		/*
+		 * Used in Samsung GT-S7710 "Skomer"
+		 * Data from vendor boardfile board-skomer-[bm|battery].c
+		 */
+		.compatible = "samsung,eb485159lu",
+		.name = "EB485159LU",
+		.info = {
+			.charge_full_design_uah = 1700000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 100000,
+			.factory_internal_resistance_charging_uohm = 200000,
+			.voltage_min_design_uv = 3320000,
+			.voltage_max_design_uv = 4350000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 900000,
+			.constant_charge_voltage_max_uv = 4340000,
+			.charge_term_current_ua = 200000,
+			.charge_restart_voltage_uv = 4300000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -50,
+			.temp_alert_min = 0,
+			.temp_alert_max = 40,
+			.temp_max = 60,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_eb485159lu,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb485159lu),
+			/* CHECKME: vendor uses the 1500 mAh table, check against datasheet */
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb485159lu,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb485159lu),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb485159lu,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb485159lu),
+			.bti_resistance_ohm = 2400,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+	{
+		/*
+		 * Used in Samsung GT-I9070 "Janice"
+		 * Data from vendor boardfile board-janice-bm.c
+		 */
+		.compatible = "samsung,eb535151vu",
+		.name = "EB535151VU",
+		.info = {
+			.charge_full_design_uah = 1500000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 100000,
+			.factory_internal_resistance_charging_uohm = 200000,
+			/* If you have data on this fix the min_design_uv */
+			.voltage_min_design_uv = 3300000,
+			.voltage_max_design_uv = 4180000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 900000,
+			.constant_charge_voltage_max_uv = 4200000,
+			.charge_term_current_ua = 200000,
+			.charge_restart_voltage_uv = 4170000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -5,
+			.temp_alert_min = 0,
+			.temp_alert_max = 40,
+			.temp_max = 60,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_eb535151vu,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb535151vu),
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb535151vu,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb535151vu),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb535151vu,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb535151vu),
+			.bti_resistance_ohm = 1500,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+	{
+		/*
+		 * Used in Samsung GT-I8530 "Gavini"
+		 * Data from vendor boardfile board-gavini-bm.c
+		 */
+		.compatible = "samsung,eb585157lu",
+		.name = "EB585157LU",
+		.info = {
+			.charge_full_design_uah = 2000000,
+			.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+			.factory_internal_resistance_uohm = 105000,
+			.factory_internal_resistance_charging_uohm = 160000,
+			/* If you have data on this fix the min_design_uv */
+			.voltage_min_design_uv = 3300000,
+			.voltage_max_design_uv = 4320000,
+			.overvoltage_limit_uv = 4500000,
+			.constant_charge_current_max_ua = 1500000,
+			.constant_charge_voltage_max_uv = 4350000,
+			.charge_term_current_ua = 120000,
+			.charge_restart_voltage_uv = 4300000,
+			.maintenance_charge = samsung_maint_charge_table,
+			.maintenance_charge_size = ARRAY_SIZE(samsung_maint_charge_table),
+			.alert_low_temp_charge_current_ua = 300000,
+			.alert_low_temp_charge_voltage_uv = 4000000,
+			.alert_high_temp_charge_current_ua = 300000,
+			.alert_high_temp_charge_voltage_uv = 4000000,
+			.temp_min = -5,
+			.temp_alert_min = 0,
+			.temp_alert_max = 40,
+			.temp_max = 60,
+			.resist_table = samsung_temp2res,
+			.resist_table_size = ARRAY_SIZE(samsung_temp2res),
+			/* If you have tables for more temperatures, add them */
+			.ocv_temp[0] = 25,
+			.ocv_table[0] = samsung_ocv_cap_eb585157lu,
+			.ocv_table_size[0] = ARRAY_SIZE(samsung_ocv_cap_eb585157lu),
+			.vbat2ri_discharging = samsung_vbat2res_discharging_eb585157lu,
+			.vbat2ri_discharging_size = ARRAY_SIZE(samsung_vbat2res_discharging_eb585157lu),
+			.vbat2ri_charging = samsung_vbat2res_charging_eb585157lu,
+			.vbat2ri_charging_size = ARRAY_SIZE(samsung_vbat2res_charging_eb585157lu),
+			.bti_resistance_ohm = 2400,
+			.bti_resistance_tolerance = 40,
+		},
+	},
+};
+
+int samsung_sdi_battery_get_info(struct device *dev,
+				 const char *compatible,
+				 struct power_supply_battery_info **info)
+{
+	struct samsung_sdi_battery *batt;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(samsung_sdi_batteries); i++) {
+		batt = &samsung_sdi_batteries[i];
+		if (!strcmp(compatible, batt->compatible))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(samsung_sdi_batteries))
+		return -ENODEV;
+
+	*info = &batt->info;
+	dev_info(dev, "Samsung SDI %s battery %d mAh\n",
+		 batt->name, batt->info.charge_full_design_uah / 1000);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(samsung_sdi_battery_get_info);
diff --git a/drivers/power/supply/samsung-sdi-battery.h b/drivers/power/supply/samsung-sdi-battery.h
new file mode 100644
index 000000000..365ab6e85
--- /dev/null
+++ b/drivers/power/supply/samsung-sdi-battery.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if IS_ENABLED(CONFIG_BATTERY_SAMSUNG_SDI)
+extern int samsung_sdi_battery_get_info(struct device *dev,
+				const char *compatible,
+				struct power_supply_battery_info **info);
+#else
+static inline int samsung_sdi_battery_get_info(struct device *dev,
+				const char *compatible,
+				struct power_supply_battery_info **info)
+{
+	return -ENODEV;
+}
+#endif
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
new file mode 100644
index 000000000..c4a95b014
--- /dev/null
+++ b/drivers/power/supply/sbs-battery.c
@@ -0,0 +1,1294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Gas Gauge driver for SBS Compliant Batteries
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/devm-helpers.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/of_device.h>
+#include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+
+enum {
+	REG_MANUFACTURER_DATA,
+	REG_BATTERY_MODE,
+	REG_TEMPERATURE,
+	REG_VOLTAGE,
+	REG_CURRENT_NOW,
+	REG_CURRENT_AVG,
+	REG_MAX_ERR,
+	REG_CAPACITY,
+	REG_TIME_TO_EMPTY_NOW,
+	REG_TIME_TO_EMPTY_AVG,
+	REG_TIME_TO_FULL_AVG,
+	REG_STATUS,
+	REG_CAPACITY_LEVEL,
+	REG_CYCLE_COUNT,
+	REG_SERIAL_NUMBER,
+	REG_REMAINING_CAPACITY,
+	REG_REMAINING_CAPACITY_CHARGE,
+	REG_FULL_CHARGE_CAPACITY,
+	REG_FULL_CHARGE_CAPACITY_CHARGE,
+	REG_DESIGN_CAPACITY,
+	REG_DESIGN_CAPACITY_CHARGE,
+	REG_DESIGN_VOLTAGE_MIN,
+	REG_DESIGN_VOLTAGE_MAX,
+	REG_CHEMISTRY,
+	REG_MANUFACTURER,
+	REG_MODEL_NAME,
+	REG_CHARGE_CURRENT,
+	REG_CHARGE_VOLTAGE,
+};
+
+#define REG_ADDR_SPEC_INFO		0x1A
+#define SPEC_INFO_VERSION_MASK		GENMASK(7, 4)
+#define SPEC_INFO_VERSION_SHIFT		4
+
+#define SBS_VERSION_1_0			1
+#define SBS_VERSION_1_1			2
+#define SBS_VERSION_1_1_WITH_PEC	3
+
+#define REG_ADDR_MANUFACTURE_DATE	0x1B
+
+/* Battery Mode defines */
+#define BATTERY_MODE_OFFSET		0x03
+#define BATTERY_MODE_CAPACITY_MASK	BIT(15)
+enum sbs_capacity_mode {
+	CAPACITY_MODE_AMPS = 0,
+	CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
+};
+#define BATTERY_MODE_CHARGER_MASK	(1<<14)
+
+/* manufacturer access defines */
+#define MANUFACTURER_ACCESS_STATUS	0x0006
+#define MANUFACTURER_ACCESS_SLEEP	0x0011
+
+/* battery status value bits */
+#define BATTERY_INITIALIZED		0x80
+#define BATTERY_DISCHARGING		0x40
+#define BATTERY_FULL_CHARGED		0x20
+#define BATTERY_FULL_DISCHARGED		0x10
+
+/* min_value and max_value are only valid for numerical data */
+#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
+	.psp = _psp, \
+	.addr = _addr, \
+	.min_value = _min_value, \
+	.max_value = _max_value, \
+}
+
+static const struct chip_data {
+	enum power_supply_property psp;
+	u8 addr;
+	int min_value;
+	int max_value;
+} sbs_data[] = {
+	[REG_MANUFACTURER_DATA] =
+		SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+	[REG_BATTERY_MODE] =
+		SBS_DATA(-1, 0x03, 0, 65535),
+	[REG_TEMPERATURE] =
+		SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+	[REG_VOLTAGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 65535),
+	[REG_CURRENT_NOW] =
+		SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
+	[REG_CURRENT_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767),
+	[REG_MAX_ERR] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100),
+	[REG_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100),
+	[REG_REMAINING_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
+	[REG_REMAINING_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
+	[REG_FULL_CHARGE_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
+	[REG_FULL_CHARGE_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
+	[REG_TIME_TO_EMPTY_NOW] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, 0x11, 0, 65535),
+	[REG_TIME_TO_EMPTY_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
+	[REG_TIME_TO_FULL_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
+	[REG_CHARGE_CURRENT] =
+		SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535),
+	[REG_CHARGE_VOLTAGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535),
+	[REG_STATUS] =
+		SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+	[REG_CAPACITY_LEVEL] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
+	[REG_CYCLE_COUNT] =
+		SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+	[REG_DESIGN_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
+	[REG_DESIGN_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
+	[REG_DESIGN_VOLTAGE_MIN] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
+	[REG_DESIGN_VOLTAGE_MAX] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
+	[REG_SERIAL_NUMBER] =
+		SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+	/* Properties of type `const char *' */
+	[REG_MANUFACTURER] =
+		SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
+	[REG_MODEL_NAME] =
+		SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535),
+	[REG_CHEMISTRY] =
+		SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535)
+};
+
+static const enum power_supply_property sbs_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
+	POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
+	POWER_SUPPLY_PROP_MANUFACTURE_DAY,
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME
+};
+
+/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
+#define SBS_FLAGS_TI_BQ20ZX5		BIT(0)
+
+static const enum power_supply_property string_properties[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+#define NR_STRING_BUFFERS	ARRAY_SIZE(string_properties)
+
+struct sbs_info {
+	struct i2c_client		*client;
+	struct power_supply		*power_supply;
+	bool				is_present;
+	struct gpio_desc		*gpio_detect;
+	bool				charger_broadcasts;
+	int				last_state;
+	int				poll_time;
+	u32				i2c_retry_count;
+	u32				poll_retry_count;
+	struct delayed_work		work;
+	struct mutex			mode_lock;
+	u32				flags;
+	int				technology;
+	char				strings[NR_STRING_BUFFERS][I2C_SMBUS_BLOCK_MAX + 1];
+};
+
+static char *sbs_get_string_buf(struct sbs_info *chip,
+				enum power_supply_property psp)
+{
+	int i = 0;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		if (string_properties[i] == psp)
+			return chip->strings[i];
+
+	return ERR_PTR(-EINVAL);
+}
+
+static void sbs_invalidate_cached_props(struct sbs_info *chip)
+{
+	int i = 0;
+
+	chip->technology = -1;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		chip->strings[i][0] = 0;
+}
+
+static bool force_load;
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address);
+static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
+
+static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
+{
+	int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
+	if (val < 0)
+		goto exit;
+
+	val |= BATTERY_MODE_CHARGER_MASK;
+
+	val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
+
+exit:
+	if (val < 0)
+		dev_err(&chip->client->dev,
+			"Failed to disable charger broadcasting: %d\n", val);
+	else
+		dev_dbg(&chip->client->dev, "%s\n", __func__);
+}
+
+static int sbs_update_presence(struct sbs_info *chip, bool is_present)
+{
+	struct i2c_client *client = chip->client;
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+	u8 version;
+
+	if (chip->is_present == is_present)
+		return 0;
+
+	if (!is_present) {
+		chip->is_present = false;
+		/* Disable PEC when no device is present */
+		client->flags &= ~I2C_CLIENT_PEC;
+		sbs_invalidate_cached_props(chip);
+		return 0;
+	}
+
+	/* Check if device supports packet error checking and use it */
+	while (retries > 0) {
+		ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
+		if (ret >= 0)
+			break;
+
+		/*
+		 * Some batteries trigger the detection pin before the
+		 * I2C bus is properly connected. This works around the
+		 * issue.
+		 */
+		msleep(100);
+
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
+
+		/* fallback to old behaviour */
+		client->flags &= ~I2C_CLIENT_PEC;
+		chip->is_present = true;
+
+		return ret;
+	}
+
+	version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
+
+	if (version == SBS_VERSION_1_1_WITH_PEC)
+		client->flags |= I2C_CLIENT_PEC;
+	else
+		client->flags &= ~I2C_CLIENT_PEC;
+
+	if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel")
+	    && client->flags & I2C_CLIENT_PEC) {
+		dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n");
+		client->flags &= ~I2C_CLIENT_PEC;
+	}
+
+	dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
+		"enabled" : "disabled");
+
+	if (!chip->is_present && is_present && !chip->charger_broadcasts)
+		sbs_disable_charger_broadcasts(chip);
+
+	chip->is_present = true;
+
+	return 0;
+}
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+
+	while (retries > 0) {
+		ret = i2c_smbus_read_word_data(client, address);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	s32 ret = 0, block_length = 0;
+	int retries_length, retries_block;
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+
+	retries_length = chip->i2c_retry_count;
+	retries_block = chip->i2c_retry_count;
+
+	dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
+				    "Fallback method does not support PEC.\n");
+
+	/* Adapter needs to support these two functions */
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)){
+		return -ENODEV;
+	}
+
+	/* Get the length of block data */
+	while (retries_length > 0) {
+		ret = i2c_smbus_read_byte_data(client, address);
+		if (ret >= 0)
+			break;
+		retries_length--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_length does not include NULL terminator */
+	block_length = ret;
+	if (block_length > I2C_SMBUS_BLOCK_MAX) {
+		dev_err(&client->dev,
+			"%s: Returned block_length is longer than 0x%x\n",
+			__func__, I2C_SMBUS_BLOCK_MAX);
+		return -EINVAL;
+	}
+
+	/* Get the block data */
+	while (retries_block > 0) {
+		ret = i2c_smbus_read_i2c_block_data(
+				client, address,
+				block_length + 1, block_buffer);
+		if (ret >= 0)
+			break;
+		retries_block--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_buffer[0] == block_length */
+	memcpy(values, block_buffer + 1, block_length);
+	values[block_length] = '\0';
+
+	return ret;
+}
+
+static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	int ret = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
+		bool pec = client->flags & I2C_CLIENT_PEC;
+		client->flags &= ~I2C_CLIENT_PEC;
+		ret = sbs_read_string_data_fallback(client, address, values);
+		if (pec)
+			client->flags |= I2C_CLIENT_PEC;
+		return ret;
+	}
+
+	while (retries > 0) {
+		ret = i2c_smbus_read_block_data(client, address, values);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
+		return ret;
+	}
+
+	/* add string termination */
+	values[ret] = '\0';
+	return ret;
+}
+
+static int sbs_write_word_data(struct i2c_client *client, u8 address,
+	u16 value)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+
+	while (retries > 0) {
+		ret = i2c_smbus_write_word_data(client, address, value);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c write to address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sbs_status_correct(struct i2c_client *client, int *intval)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr);
+	if (ret < 0)
+		return ret;
+
+	ret = (s16)ret;
+
+	/* Not drawing current -> not charging (i.e. idle) */
+	if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0)
+		*intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+	if (*intval == POWER_SUPPLY_STATUS_FULL) {
+		/* Drawing or providing current when full */
+		if (ret > 0)
+			*intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ret < 0)
+			*intval = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	return 0;
+}
+
+static bool sbs_bat_needs_calibration(struct i2c_client *client)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr);
+	if (ret < 0)
+		return false;
+
+	return !!(ret & BIT(7));
+}
+
+static int sbs_get_ti_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+
+	/*
+	 * Write to ManufacturerAccess with ManufacturerAccess command
+	 * and then read the status.
+	 */
+	ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+				  MANUFACTURER_ACCESS_STATUS);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
+
+	ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
+
+	if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
+	    ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
+		val->intval = 0;
+		return 0;
+	}
+
+	/* Mask the upper nibble of 2nd byte and
+	 * lower byte of response then
+	 * shift the result by 8 to get status*/
+	ret &= 0x0F00;
+	ret >>= 8;
+	if (psp == POWER_SUPPLY_PROP_PRESENT) {
+		if (ret == 0x0F)
+			/* battery removed */
+			val->intval = 0;
+		else
+			val->intval = 1;
+	} else if (psp == POWER_SUPPLY_PROP_HEALTH) {
+		if (ret == 0x09)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (ret == 0x0B)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (ret == 0x0C)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (sbs_bat_needs_calibration(client))
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	return 0;
+}
+
+static int sbs_get_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
+		return sbs_get_ti_battery_presence_and_health(client, psp, val);
+
+	/* Dummy command; if it succeeds, battery is present. */
+	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+	if (ret < 0) { /* battery not present*/
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = 0;
+			return 0;
+		}
+		return ret;
+	}
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		val->intval = 1; /* battery present */
+	else { /* POWER_SUPPLY_PROP_HEALTH */
+		if (sbs_bat_needs_calibration(client)) {
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		} else {
+			/* SBS spec doesn't have a general health command. */
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	return 0;
+}
+
+static int sbs_get_battery_property(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	s32 ret;
+
+	ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	/* returned values are 16 bit */
+	if (sbs_data[reg_offset].min_value < 0)
+		ret = (s16)ret;
+
+	if (ret >= sbs_data[reg_offset].min_value &&
+	    ret <= sbs_data[reg_offset].max_value) {
+		val->intval = ret;
+		if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
+			if (!(ret & BATTERY_INITIALIZED))
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+			else if (ret & BATTERY_FULL_CHARGED)
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+			else if (ret & BATTERY_FULL_DISCHARGED)
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+			else
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+			return 0;
+		} else if (psp != POWER_SUPPLY_PROP_STATUS) {
+			return 0;
+		}
+
+		if (ret & BATTERY_FULL_CHARGED)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (ret & BATTERY_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+
+		sbs_status_correct(client, &val->intval);
+
+		if (chip->poll_time == 0)
+			chip->last_state = val->intval;
+		else if (chip->last_state != val->intval) {
+			cancel_delayed_work_sync(&chip->work);
+			power_supply_changed(chip->power_supply);
+			chip->poll_time = 0;
+		}
+	} else {
+		if (psp == POWER_SUPPLY_PROP_STATUS)
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		else if (psp == POWER_SUPPLY_PROP_CAPACITY)
+			/* sbs spec says that this can be >100 %
+			 * even if max value is 100 %
+			 */
+			val->intval = min(ret, 100);
+		else
+			val->intval = 0;
+	}
+
+	return 0;
+}
+
+static int sbs_get_property_index(struct i2c_client *client,
+	enum power_supply_property psp)
+{
+	int count;
+
+	for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
+		if (psp == sbs_data[count].psp)
+			return count;
+
+	dev_warn(&client->dev,
+		"%s: Invalid Property - %d\n", __func__, psp);
+
+	return -EINVAL;
+}
+
+static const char *sbs_get_constant_string(struct sbs_info *chip,
+			enum power_supply_property psp)
+{
+	int ret;
+	char *buf;
+	u8 addr;
+
+	buf = sbs_get_string_buf(chip, psp);
+	if (IS_ERR(buf))
+		return buf;
+
+	if (!buf[0]) {
+		ret = sbs_get_property_index(chip->client, psp);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		addr = sbs_data[ret].addr;
+
+		ret = sbs_read_string_data(chip->client, addr, buf);
+		if (ret < 0)
+			return ERR_PTR(ret);
+	}
+
+	return buf;
+}
+
+static void  sbs_unit_adjustment(struct i2c_client *client,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+#define BASE_UNIT_CONVERSION		1000
+#define BATTERY_MODE_CAP_MULT_WATT	(10 * BASE_UNIT_CONVERSION)
+#define TIME_UNIT_CONVERSION		60
+#define TEMP_KELVIN_TO_CELSIUS		2731
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		/* sbs provides energy in units of 10mWh.
+		 * Convert to µWh
+		 */
+		val->intval *= BATTERY_MODE_CAP_MULT_WATT;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval *= BASE_UNIT_CONVERSION;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		/* sbs provides battery temperature in 0.1K
+		 * so convert it to 0.1°C
+		 */
+		val->intval -= TEMP_KELVIN_TO_CELSIUS;
+		break;
+
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+		/* sbs provides time to empty and time to full in minutes.
+		 * Convert to seconds
+		 */
+		val->intval *= TIME_UNIT_CONVERSION;
+		break;
+
+	default:
+		dev_dbg(&client->dev,
+			"%s: no need for unit conversion %d\n", __func__, psp);
+	}
+}
+
+static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
+	enum sbs_capacity_mode mode)
+{
+	int ret, original_val;
+
+	original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
+	if (original_val < 0)
+		return original_val;
+
+	if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
+		return mode;
+
+	if (mode == CAPACITY_MODE_AMPS)
+		ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
+	else
+		ret = original_val | BATTERY_MODE_CAPACITY_MASK;
+
+	ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(1000, 2000);
+
+	return original_val & BATTERY_MODE_CAPACITY_MASK;
+}
+
+static int sbs_get_battery_capacity(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+	enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
+
+	if (power_supply_is_amp_property(psp))
+		mode = CAPACITY_MODE_AMPS;
+
+	mode = sbs_set_capacity_mode(client, mode);
+	if ((int)mode < 0)
+		return mode;
+
+	ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ret;
+
+	ret = sbs_set_capacity_mode(client, mode);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static char sbs_serial[5];
+static int sbs_get_battery_serial_number(struct i2c_client *client,
+	union power_supply_propval *val)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
+	if (ret < 0)
+		return ret;
+
+	sprintf(sbs_serial, "%04x", ret);
+	val->strval = sbs_serial;
+
+	return 0;
+}
+
+static int sbs_get_chemistry(struct sbs_info *chip,
+		union power_supply_propval *val)
+{
+	const char *chemistry;
+
+	if (chip->technology != -1) {
+		val->intval = chip->technology;
+		return 0;
+	}
+
+	chemistry = sbs_get_constant_string(chip, POWER_SUPPLY_PROP_TECHNOLOGY);
+
+	if (IS_ERR(chemistry))
+		return PTR_ERR(chemistry);
+
+	if (!strncasecmp(chemistry, "LION", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LION;
+	else if (!strncasecmp(chemistry, "LiP", 3))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
+	else if (!strncasecmp(chemistry, "NiCd", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
+	else if (!strncasecmp(chemistry, "NiMH", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
+	else
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+
+	if (chip->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+		dev_warn(&chip->client->dev, "Unknown chemistry: %s\n", chemistry);
+
+	val->intval = chip->technology;
+
+	return 0;
+}
+
+static int sbs_get_battery_manufacture_date(struct i2c_client *client,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret;
+	u16 day, month, year;
+
+	ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE);
+	if (ret < 0)
+		return ret;
+
+	day   = ret   & GENMASK(4,  0);
+	month = (ret  & GENMASK(8,  5)) >> 5;
+	year  = ((ret & GENMASK(15, 9)) >> 9) + 1980;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+		val->intval = year;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+		val->intval = month;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+		val->intval = day;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sbs_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret = 0;
+	struct sbs_info *chip = power_supply_get_drvdata(psy);
+	struct i2c_client *client = chip->client;
+	const char *str;
+
+	if (chip->gpio_detect) {
+		ret = gpiod_get_value_cansleep(chip->gpio_detect);
+		if (ret < 0)
+			return ret;
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = ret;
+			sbs_update_presence(chip, ret);
+			return 0;
+		}
+		if (ret == 0)
+			return -ENODATA;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = sbs_get_battery_presence_and_health(client, psp, val);
+
+		/* this can only be true if no gpio is used */
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			return 0;
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		ret = sbs_get_chemistry(chip, val);
+		if (ret < 0)
+			break;
+
+		goto done; /* don't trigger power_supply_changed()! */
+
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		/* sbs_get_battery_capacity() will change the battery mode
+		 * temporarily to read the requested attribute. Ensure we stay
+		 * in the desired mode for the duration of the attribute read.
+		 */
+		mutex_lock(&chip->mode_lock);
+		ret = sbs_get_battery_capacity(client, ret, psp, val);
+		mutex_unlock(&chip->mode_lock);
+		break;
+
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = sbs_get_battery_serial_number(client, val);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_TEMP:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CAPACITY:
+	case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		ret = sbs_get_battery_property(client, ret, psp, val);
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		str = sbs_get_constant_string(chip, psp);
+		if (IS_ERR(str))
+			ret = PTR_ERR(str);
+		else
+			val->strval = str;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+	case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+	case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+		ret = sbs_get_battery_manufacture_date(client, psp, val);
+		break;
+
+	default:
+		dev_err(&client->dev,
+			"%s: INVALID property\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
+		bool old_present = chip->is_present;
+		union power_supply_propval val;
+		int err = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+
+		sbs_update_presence(chip, !err && val.intval);
+
+		if (old_present != chip->is_present)
+			power_supply_changed(chip->power_supply);
+	}
+
+done:
+	if (!ret) {
+		/* Convert units to match requirements for power supply class */
+		sbs_unit_adjustment(client, psp, val);
+		dev_dbg(&client->dev,
+			"%s: property = %d, value = %x\n", __func__,
+			psp, val->intval);
+	} else if (!chip->is_present)  {
+		/* battery not present, so return NODATA for properties */
+		ret = -ENODATA;
+	}
+	return ret;
+}
+
+static void sbs_supply_changed(struct sbs_info *chip)
+{
+	struct power_supply *battery = chip->power_supply;
+	int ret;
+
+	ret = gpiod_get_value_cansleep(chip->gpio_detect);
+	if (ret < 0)
+		return;
+	sbs_update_presence(chip, ret);
+	power_supply_changed(battery);
+}
+
+static irqreturn_t sbs_irq(int irq, void *devid)
+{
+	sbs_supply_changed(devid);
+	return IRQ_HANDLED;
+}
+
+static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+	unsigned int data)
+{
+	sbs_supply_changed(i2c_get_clientdata(client));
+}
+
+static void sbs_external_power_changed(struct power_supply *psy)
+{
+	struct sbs_info *chip = power_supply_get_drvdata(psy);
+
+	/* cancel outstanding work */
+	cancel_delayed_work_sync(&chip->work);
+
+	schedule_delayed_work(&chip->work, HZ);
+	chip->poll_time = chip->poll_retry_count;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+	struct sbs_info *chip;
+	s32 ret;
+
+	chip = container_of(work, struct sbs_info, work.work);
+
+	ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
+	/* if the read failed, give up on this work */
+	if (ret < 0) {
+		chip->poll_time = 0;
+		return;
+	}
+
+	if (ret & BATTERY_FULL_CHARGED)
+		ret = POWER_SUPPLY_STATUS_FULL;
+	else if (ret & BATTERY_DISCHARGING)
+		ret = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		ret = POWER_SUPPLY_STATUS_CHARGING;
+
+	sbs_status_correct(chip->client, &ret);
+
+	if (chip->last_state != ret) {
+		chip->poll_time = 0;
+		power_supply_changed(chip->power_supply);
+		return;
+	}
+	if (chip->poll_time > 0) {
+		schedule_delayed_work(&chip->work, HZ);
+		chip->poll_time--;
+		return;
+	}
+}
+
+static const struct power_supply_desc sbs_default_desc = {
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = sbs_properties,
+	.num_properties = ARRAY_SIZE(sbs_properties),
+	.get_property = sbs_get_property,
+	.external_power_changed = sbs_external_power_changed,
+};
+
+static int sbs_probe(struct i2c_client *client)
+{
+	struct sbs_info *chip;
+	struct power_supply_desc *sbs_desc;
+	struct sbs_platform_data *pdata = client->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+	int rc;
+	int irq;
+
+	sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
+			sizeof(*sbs_desc), GFP_KERNEL);
+	if (!sbs_desc)
+		return -ENOMEM;
+
+	sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s",
+			dev_name(&client->dev));
+	if (!sbs_desc->name)
+		return -ENOMEM;
+
+	chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
+	chip->client = client;
+	psy_cfg.of_node = client->dev.of_node;
+	psy_cfg.drv_data = chip;
+	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+	sbs_invalidate_cached_props(chip);
+	mutex_init(&chip->mode_lock);
+
+	/* use pdata if available, fall back to DT properties,
+	 * or hardcoded defaults if not
+	 */
+	rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count",
+				      &chip->i2c_retry_count);
+	if (rc)
+		chip->i2c_retry_count = 0;
+
+	rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count",
+				      &chip->poll_retry_count);
+	if (rc)
+		chip->poll_retry_count = 0;
+
+	if (pdata) {
+		chip->poll_retry_count = pdata->poll_retry_count;
+		chip->i2c_retry_count  = pdata->i2c_retry_count;
+	}
+	chip->i2c_retry_count = chip->i2c_retry_count + 1;
+
+	chip->charger_broadcasts = !device_property_read_bool(&client->dev,
+					"sbs,disable-charger-broadcasts");
+
+	chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
+			"sbs,battery-detect", GPIOD_IN);
+	if (IS_ERR(chip->gpio_detect))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->gpio_detect),
+				     "Failed to get gpio\n");
+
+	i2c_set_clientdata(client, chip);
+
+	if (!chip->gpio_detect)
+		goto skip_gpio;
+
+	irq = gpiod_to_irq(chip->gpio_detect);
+	if (irq <= 0) {
+		dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
+		goto skip_gpio;
+	}
+
+	rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		dev_name(&client->dev), chip);
+	if (rc) {
+		dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
+		goto skip_gpio;
+	}
+
+skip_gpio:
+	/*
+	 * Before we register, we might need to make sure we can actually talk
+	 * to the battery.
+	 */
+	if (!(force_load || chip->gpio_detect)) {
+		union power_supply_propval val;
+
+		rc = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+		if (rc < 0 || !val.intval)
+			return dev_err_probe(&client->dev, -ENODEV,
+					     "Failed to get present status\n");
+	}
+
+	rc = devm_delayed_work_autocancel(&client->dev, &chip->work,
+					  sbs_delayed_work);
+	if (rc)
+		return rc;
+
+	chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
+						   &psy_cfg);
+	if (IS_ERR(chip->power_supply))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply),
+				     "Failed to register power supply\n");
+
+	dev_info(&client->dev,
+		"%s: battery gas gauge device registered\n", client->name);
+
+	return 0;
+}
+
+#if defined CONFIG_PM_SLEEP
+
+static int sbs_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->poll_time > 0)
+		cancel_delayed_work_sync(&chip->work);
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
+		/* Write to manufacturer access with sleep command. */
+		ret = sbs_write_word_data(client,
+					  sbs_data[REG_MANUFACTURER_DATA].addr,
+					  MANUFACTURER_ACCESS_SLEEP);
+		if (chip->is_present && ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
+#define SBS_PM_OPS (&sbs_pm_ops)
+
+#else
+#define SBS_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+	{ "bq20z65", 0 },
+	{ "bq20z75", 0 },
+	{ "sbs-battery", 1 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static const struct of_device_id sbs_dt_ids[] = {
+	{ .compatible = "sbs,sbs-battery" },
+	{
+		.compatible = "ti,bq20z65",
+		.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+	},
+	{
+		.compatible = "ti,bq20z75",
+		.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+
+static struct i2c_driver sbs_battery_driver = {
+	.probe_new	= sbs_probe,
+	.alert		= sbs_alert,
+	.id_table	= sbs_id,
+	.driver = {
+		.name	= "sbs-battery",
+		.of_match_table = sbs_dt_ids,
+		.pm	= SBS_PM_OPS,
+	},
+};
+module_i2c_driver(sbs_battery_driver);
+
+MODULE_DESCRIPTION("SBS battery monitor driver");
+MODULE_LICENSE("GPL");
+
+module_param(force_load, bool, 0444);
+MODULE_PARM_DESC(force_load,
+		 "Attempt to load the driver even if no battery is connected");
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
new file mode 100644
index 000000000..bc927c0dd
--- /dev/null
+++ b/drivers/power/supply/sbs-charger.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016, Prodys S.L.
+ *
+ * This adds support for sbs-charger compilant chips as defined here:
+ * http://sbs-forum.org/specs/sbc110.pdf
+ *
+ * Implemetation based on sbs-battery.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/devm-helpers.h>
+
+#define SBS_CHARGER_REG_SPEC_INFO		0x11
+#define SBS_CHARGER_REG_STATUS			0x13
+#define SBS_CHARGER_REG_ALARM_WARNING		0x16
+
+#define SBS_CHARGER_STATUS_CHARGE_INHIBITED	BIT(0)
+#define SBS_CHARGER_STATUS_RES_COLD		BIT(9)
+#define SBS_CHARGER_STATUS_RES_HOT		BIT(10)
+#define SBS_CHARGER_STATUS_BATTERY_PRESENT	BIT(14)
+#define SBS_CHARGER_STATUS_AC_PRESENT		BIT(15)
+
+#define SBS_CHARGER_POLL_TIME			500
+
+struct sbs_info {
+	struct i2c_client		*client;
+	struct power_supply		*power_supply;
+	struct regmap			*regmap;
+	struct delayed_work		work;
+	unsigned int			last_state;
+};
+
+static int sbs_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct sbs_info *chip = power_supply_get_drvdata(psy);
+	unsigned int reg;
+
+	reg = chip->last_state;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+		if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
+			 !(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (reg & SBS_CHARGER_STATUS_RES_COLD)
+			val->intval = POWER_SUPPLY_HEALTH_COLD;
+		if (reg & SBS_CHARGER_STATUS_RES_HOT)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sbs_check_state(struct sbs_info *chip)
+{
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &reg);
+	if (!ret && reg != chip->last_state) {
+		chip->last_state = reg;
+		power_supply_changed(chip->power_supply);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+	struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
+
+	sbs_check_state(chip);
+
+	schedule_delayed_work(&chip->work,
+			      msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+}
+
+static irqreturn_t sbs_irq_thread(int irq, void *data)
+{
+	struct sbs_info *chip = data;
+	int ret;
+
+	ret = sbs_check_state(chip);
+
+	return ret ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static enum power_supply_property sbs_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
+static bool sbs_readable_reg(struct device *dev, unsigned int reg)
+{
+	return reg >= SBS_CHARGER_REG_SPEC_INFO;
+}
+
+static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SBS_CHARGER_REG_STATUS:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config sbs_regmap = {
+	.reg_bits	= 8,
+	.val_bits	= 16,
+	.max_register	= SBS_CHARGER_REG_ALARM_WARNING,
+	.readable_reg	= sbs_readable_reg,
+	.volatile_reg	= sbs_volatile_reg,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
+};
+
+static const struct power_supply_desc sbs_desc = {
+	.name = "sbs-charger",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = sbs_properties,
+	.num_properties = ARRAY_SIZE(sbs_properties),
+	.get_property = sbs_get_property,
+};
+
+static int sbs_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct power_supply_config psy_cfg = {};
+	struct sbs_info *chip;
+	int ret, val;
+
+	chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	psy_cfg.of_node = client->dev.of_node;
+	psy_cfg.drv_data = chip;
+
+	i2c_set_clientdata(client, chip);
+
+	chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
+	if (IS_ERR(chip->regmap))
+		return PTR_ERR(chip->regmap);
+
+	/*
+	 * Before we register, we need to make sure we can actually talk
+	 * to the battery.
+	 */
+	ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
+	if (ret)
+		return dev_err_probe(&client->dev, ret, "Failed to get device status\n");
+	chip->last_state = val;
+
+	chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc, &psy_cfg);
+	if (IS_ERR(chip->power_supply))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply),
+				     "Failed to register power supply\n");
+
+	/*
+	 * The sbs-charger spec doesn't impose the use of an interrupt. So in
+	 * the case it wasn't provided we use polling in order get the charger's
+	 * status.
+	 */
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, sbs_irq_thread,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					dev_name(&client->dev), chip);
+		if (ret)
+			return dev_err_probe(&client->dev, ret, "Failed to request irq\n");
+	} else {
+		ret = devm_delayed_work_autocancel(&client->dev, &chip->work,
+						   sbs_delayed_work);
+		if (ret)
+			return dev_err_probe(&client->dev, ret,
+					     "Failed to init work for polling\n");
+
+		schedule_delayed_work(&chip->work,
+				      msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+	}
+
+	dev_info(&client->dev,
+		 "%s: smart charger device registered\n", client->name);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbs_dt_ids[] = {
+	{ .compatible = "sbs,sbs-charger" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+	{ "sbs-charger", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static struct i2c_driver sbs_driver = {
+	.probe		= sbs_probe,
+	.id_table	= sbs_id,
+	.driver = {
+		.name	= "sbs-charger",
+		.of_match_table = of_match_ptr(sbs_dt_ids),
+	},
+};
+module_i2c_driver(sbs_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
+MODULE_DESCRIPTION("SBS smart charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/sbs-manager.c b/drivers/power/supply/sbs-manager.c
new file mode 100644
index 000000000..71ec8f74f
--- /dev/null
+++ b/drivers/power/supply/sbs-manager.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for SBS compliant Smart Battery System Managers
+ *
+ * The device communicates via i2c at address 0x0a and multiplexes access to up
+ * to four smart batteries at address 0x0b.
+ *
+ * Via sysfs interface the online state and charge type are presented.
+ *
+ * Datasheet SBSM:    http://sbs-forum.org/specs/sbsm100b.pdf
+ * Datasheet LTC1760: http://cds.linear.com/docs/en/datasheet/1760fb.pdf
+ *
+ * Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+
+#define SBSM_MAX_BATS  4
+#define SBSM_RETRY_CNT 3
+
+/* registers addresses */
+#define SBSM_CMD_BATSYSSTATE     0x01
+#define SBSM_CMD_BATSYSSTATECONT 0x02
+#define SBSM_CMD_BATSYSINFO      0x04
+#define SBSM_CMD_LTC             0x3c
+
+#define SBSM_MASK_BAT_SUPPORTED  GENMASK(3, 0)
+#define SBSM_MASK_CHARGE_BAT     GENMASK(7, 4)
+#define SBSM_BIT_AC_PRESENT      BIT(0)
+#define SBSM_BIT_TURBO           BIT(7)
+
+#define SBSM_SMB_BAT_OFFSET      11
+struct sbsm_data {
+	struct i2c_client *client;
+	struct i2c_mux_core *muxc;
+
+	struct power_supply *psy;
+
+	u8 cur_chan;          /* currently selected channel */
+	struct gpio_chip chip;
+	bool is_ltc1760;      /* special capabilities */
+
+	unsigned int supported_bats;
+	unsigned int last_state;
+	unsigned int last_state_cont;
+};
+
+static enum power_supply_property sbsm_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static int sbsm_read_word(struct i2c_client *client, u8 address)
+{
+	int reg, retries;
+
+	for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+		reg = i2c_smbus_read_word_data(client, address);
+		if (reg >= 0)
+			break;
+	}
+
+	if (reg < 0) {
+		dev_err(&client->dev, "failed to read register 0x%02x\n",
+			address);
+	}
+
+	return reg;
+}
+
+static int sbsm_write_word(struct i2c_client *client, u8 address, u16 word)
+{
+	int ret, retries;
+
+	for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+		ret = i2c_smbus_write_word_data(client, address, word);
+		if (ret >= 0)
+			break;
+	}
+	if (ret < 0)
+		dev_err(&client->dev, "failed to write to register 0x%02x\n",
+			address);
+
+	return ret;
+}
+
+static int sbsm_get_property(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     union power_supply_propval *val)
+{
+	struct sbsm_data *data = power_supply_get_drvdata(psy);
+	int regval = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATECONT);
+		if (regval < 0)
+			return regval;
+		val->intval = !!(regval & SBSM_BIT_AC_PRESENT);
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+		if (regval < 0)
+			return regval;
+
+		if ((regval & SBSM_MASK_CHARGE_BAT) == 0) {
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			return 0;
+		}
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+
+		if (data->is_ltc1760) {
+			/* charge mode fast if turbo is active */
+			regval = sbsm_read_word(data->client, SBSM_CMD_LTC);
+			if (regval < 0)
+				return regval;
+			else if (regval & SBSM_BIT_TURBO)
+				val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sbsm_prop_is_writeable(struct power_supply *psy,
+				  enum power_supply_property psp)
+{
+	struct sbsm_data *data = power_supply_get_drvdata(psy);
+
+	return (psp == POWER_SUPPLY_PROP_CHARGE_TYPE) && data->is_ltc1760;
+}
+
+static int sbsm_set_property(struct power_supply *psy,
+			     enum power_supply_property psp,
+			     const union power_supply_propval *val)
+{
+	struct sbsm_data *data = power_supply_get_drvdata(psy);
+	int ret = -EINVAL;
+	u16 regval;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		/* write 1 to TURBO if type fast is given */
+		if (!data->is_ltc1760)
+			break;
+		regval = val->intval ==
+			 POWER_SUPPLY_CHARGE_TYPE_FAST ? SBSM_BIT_TURBO : 0;
+		ret = sbsm_write_word(data->client, SBSM_CMD_LTC, regval);
+		break;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Switch to battery
+ * Parameter chan is directly the content of SMB_BAT* nibble
+ */
+static int sbsm_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct sbsm_data *data = i2c_mux_priv(muxc);
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+	u16 reg;
+
+	if (data->cur_chan == chan)
+		return ret;
+
+	/* chan goes from 1 ... 4 */
+	reg = BIT(SBSM_SMB_BAT_OFFSET + chan);
+	ret = sbsm_write_word(data->client, SBSM_CMD_BATSYSSTATE, reg);
+	if (ret)
+		dev_err(dev, "Failed to select channel %i\n", chan);
+	else
+		data->cur_chan = chan;
+
+	return ret;
+}
+
+static int sbsm_gpio_get_value(struct gpio_chip *gc, unsigned int off)
+{
+	struct sbsm_data *data = gpiochip_get_data(gc);
+	int ret;
+
+	ret = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+	if (ret < 0)
+		return ret;
+
+	return ret & BIT(off);
+}
+
+/*
+ * This needs to be defined or the GPIO lib fails to register the pin.
+ * But the 'gpio' is always an input.
+ */
+static int sbsm_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
+{
+	return 0;
+}
+
+static int sbsm_do_alert(struct device *dev, void *d)
+{
+	struct i2c_client *client = i2c_verify_client(dev);
+	struct i2c_driver *driver;
+
+	if (!client || client->addr != 0x0b)
+		return 0;
+
+	device_lock(dev);
+	if (client->dev.driver) {
+		driver = to_i2c_driver(client->dev.driver);
+		if (driver->alert)
+			driver->alert(client, I2C_PROTOCOL_SMBUS_ALERT, 0);
+		else
+			dev_warn(&client->dev, "no driver alert()!\n");
+	} else {
+		dev_dbg(&client->dev, "alert with no driver\n");
+	}
+	device_unlock(dev);
+
+	return -EBUSY;
+}
+
+static void sbsm_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+		       unsigned int d)
+{
+	struct sbsm_data *sbsm = i2c_get_clientdata(client);
+
+	int ret, i, irq_bat = 0, state = 0;
+
+	ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATE);
+	if (ret >= 0) {
+		irq_bat = ret ^ sbsm->last_state;
+		sbsm->last_state = ret;
+		state = ret;
+	}
+
+	ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATECONT);
+	if ((ret >= 0) &&
+	    ((ret ^ sbsm->last_state_cont) & SBSM_BIT_AC_PRESENT)) {
+		irq_bat |= sbsm->supported_bats & state;
+		power_supply_changed(sbsm->psy);
+	}
+	sbsm->last_state_cont = ret;
+
+	for (i = 0; i < SBSM_MAX_BATS; i++) {
+		if (irq_bat & BIT(i)) {
+			device_for_each_child(&sbsm->muxc->adapter[i]->dev,
+					      NULL, sbsm_do_alert);
+		}
+	}
+}
+
+static int sbsm_gpio_setup(struct sbsm_data *data)
+{
+	struct gpio_chip *gc = &data->chip;
+	struct i2c_client *client = data->client;
+	struct device *dev = &client->dev;
+	int ret;
+
+	if (!device_property_present(dev, "gpio-controller"))
+		return 0;
+
+	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSSTATE);
+	if (ret < 0)
+		return ret;
+	data->last_state = ret;
+
+	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSSTATECONT);
+	if (ret < 0)
+		return ret;
+	data->last_state_cont = ret;
+
+	gc->get = sbsm_gpio_get_value;
+	gc->direction_input  = sbsm_gpio_direction_input;
+	gc->can_sleep = true;
+	gc->base = -1;
+	gc->ngpio = SBSM_MAX_BATS;
+	gc->label = client->name;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+
+	ret = devm_gpiochip_add_data(dev, gc, data);
+	if (ret)
+		return dev_err_probe(dev, ret, "devm_gpiochip_add_data failed\n");
+
+	return ret;
+}
+
+static const struct power_supply_desc sbsm_default_psy_desc = {
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = sbsm_props,
+	.num_properties = ARRAY_SIZE(sbsm_props),
+	.get_property = &sbsm_get_property,
+	.set_property = &sbsm_set_property,
+	.property_is_writeable = &sbsm_prop_is_writeable,
+};
+
+static void sbsm_del_mux_adapter(void *data)
+{
+	struct sbsm_data *sbsm = data;
+	i2c_mux_del_adapters(sbsm->muxc);
+}
+
+static int sbsm_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct sbsm_data *data;
+	struct device *dev = &client->dev;
+	struct power_supply_desc *psy_desc;
+	struct power_supply_config psy_cfg = {};
+	int ret = 0, i;
+
+	/* Device listens only at address 0x0a */
+	if (client->addr != 0x0a)
+		return -EINVAL;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EPFNOSUPPORT;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+
+	data->client = client;
+	data->is_ltc1760 = !!strstr(id->name, "ltc1760");
+
+	ret  = sbsm_read_word(client, SBSM_CMD_BATSYSINFO);
+	if (ret < 0)
+		return ret;
+	data->supported_bats = ret & SBSM_MASK_BAT_SUPPORTED;
+	data->muxc = i2c_mux_alloc(adapter, dev, SBSM_MAX_BATS, 0,
+				   I2C_MUX_LOCKED, &sbsm_select, NULL);
+	if (!data->muxc)
+		return dev_err_probe(dev, -ENOMEM, "failed to alloc i2c mux\n");
+	data->muxc->priv = data;
+
+	ret = devm_add_action_or_reset(dev, sbsm_del_mux_adapter, data);
+	if (ret)
+		return ret;
+
+	/* register muxed i2c channels. One for each supported battery */
+	for (i = 0; i < SBSM_MAX_BATS; ++i) {
+		if (data->supported_bats & BIT(i)) {
+			ret = i2c_mux_add_adapter(data->muxc, 0, i + 1, 0);
+			if (ret)
+				break;
+		}
+	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register i2c mux channel %d\n", i + 1);
+
+	psy_desc = devm_kmemdup(dev, &sbsm_default_psy_desc, sizeof(*psy_desc), GFP_KERNEL);
+	if (!psy_desc)
+		return -ENOMEM;
+
+	psy_desc->name = devm_kasprintf(dev, GFP_KERNEL, "sbsm-%s", dev_name(&client->dev));
+	if (!psy_desc->name)
+		return -ENOMEM;
+
+	ret = sbsm_gpio_setup(data);
+	if (ret < 0)
+		return ret;
+
+	psy_cfg.drv_data = data;
+	psy_cfg.of_node = dev->of_node;
+	data->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
+	if (IS_ERR(data->psy))
+		return dev_err_probe(dev, PTR_ERR(data->psy),
+				     "failed to register power supply %s\n", psy_desc->name);
+
+	return 0;
+}
+
+static const struct i2c_device_id sbsm_ids[] = {
+	{ "sbs-manager", 0 },
+	{ "ltc1760",     0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sbsm_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbsm_dt_ids[] = {
+	{ .compatible = "sbs,sbs-manager" },
+	{ .compatible = "lltc,ltc1760" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sbsm_dt_ids);
+#endif
+
+static struct i2c_driver sbsm_driver = {
+	.driver = {
+		.name = "sbsm",
+		.of_match_table = of_match_ptr(sbsm_dt_ids),
+	},
+	.probe		= sbsm_probe,
+	.alert		= sbsm_alert,
+	.id_table	= sbsm_ids
+};
+module_i2c_driver(sbsm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Karl-Heinz Schneider <karl-heinz@schneider-inet.de>");
+MODULE_DESCRIPTION("SBSM Smart Battery System Manager");
diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c
new file mode 100644
index 000000000..9ac17cf7a
--- /dev/null
+++ b/drivers/power/supply/sc2731_charger.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/usb/phy.h>
+#include <linux/regmap.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+
+/* PMIC global registers definition */
+#define SC2731_CHARGE_STATUS		0xedc
+#define SC2731_CHARGE_FULL		BIT(4)
+#define SC2731_MODULE_EN1		0xc0c
+#define SC2731_CHARGE_EN		BIT(5)
+
+/* SC2731 switch charger registers definition */
+#define SC2731_CHG_CFG0			0x0
+#define SC2731_CHG_CFG1			0x4
+#define SC2731_CHG_CFG2			0x8
+#define SC2731_CHG_CFG3			0xc
+#define SC2731_CHG_CFG4			0x10
+#define SC2731_CHG_CFG5			0x28
+
+/* SC2731_CHG_CFG0 register definition */
+#define SC2731_PRECHG_RNG_SHIFT		11
+#define SC2731_PRECHG_RNG_MASK		GENMASK(12, 11)
+
+#define SC2731_TERMINATION_VOL_MASK	GENMASK(2, 1)
+#define SC2731_TERMINATION_VOL_SHIFT	1
+#define SC2731_TERMINATION_VOL_CAL_MASK	GENMASK(8, 3)
+#define SC2731_TERMINATION_VOL_CAL_SHIFT	3
+#define SC2731_TERMINATION_CUR_MASK	GENMASK(2, 0)
+
+#define SC2731_CC_EN			BIT(13)
+#define SC2731_CHARGER_PD		BIT(0)
+
+/* SC2731_CHG_CFG1 register definition */
+#define SC2731_CUR_MASK			GENMASK(5, 0)
+
+/* SC2731_CHG_CFG5 register definition */
+#define SC2731_CUR_LIMIT_SHIFT		8
+#define SC2731_CUR_LIMIT_MASK		GENMASK(9, 8)
+
+/* Default current definition (unit is mA) */
+#define SC2731_CURRENT_LIMIT_100	100
+#define SC2731_CURRENT_LIMIT_500	500
+#define SC2731_CURRENT_LIMIT_900	900
+#define SC2731_CURRENT_LIMIT_2000	2000
+#define SC2731_CURRENT_PRECHG		450
+#define SC2731_CURRENT_STEP		50
+
+struct sc2731_charger_info {
+	struct device *dev;
+	struct regmap *regmap;
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_notify;
+	struct power_supply *psy_usb;
+	struct work_struct work;
+	struct mutex lock;
+	bool charging;
+	u32 base;
+	u32 limit;
+};
+
+static void sc2731_charger_stop_charge(struct sc2731_charger_info *info)
+{
+	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+			   SC2731_CC_EN, 0);
+
+	regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+			   SC2731_CHARGER_PD, SC2731_CHARGER_PD);
+}
+
+static int sc2731_charger_start_charge(struct sc2731_charger_info *info)
+{
+	int ret;
+
+	/* Enable charger constant current mode */
+	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+				 SC2731_CC_EN, SC2731_CC_EN);
+	if (ret)
+		return ret;
+
+	/* Start charging */
+	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+				  SC2731_CHARGER_PD, 0);
+}
+
+static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info,
+					    u32 limit)
+{
+	u32 val;
+
+	if (limit <= SC2731_CURRENT_LIMIT_100)
+		val = 0;
+	else if (limit <= SC2731_CURRENT_LIMIT_500)
+		val = 3;
+	else if (limit <= SC2731_CURRENT_LIMIT_900)
+		val = 2;
+	else
+		val = 1;
+
+	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5,
+				  SC2731_CUR_LIMIT_MASK,
+				  val << SC2731_CUR_LIMIT_SHIFT);
+}
+
+static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur)
+{
+	u32 val;
+	int ret;
+
+	if (cur > SC2731_CURRENT_LIMIT_2000)
+		cur = SC2731_CURRENT_LIMIT_2000;
+	else if (cur < SC2731_CURRENT_PRECHG)
+		cur = SC2731_CURRENT_PRECHG;
+
+	/* Calculate the step value, each step is 50 mA */
+	val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP;
+
+	/* Set pre-charge current as 450 mA */
+	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+				 SC2731_PRECHG_RNG_MASK,
+				 0x3 << SC2731_PRECHG_RNG_SHIFT);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1,
+				  SC2731_CUR_MASK, val);
+}
+
+static int sc2731_charger_get_status(struct sc2731_charger_info *info)
+{
+	u32 val;
+	int ret;
+
+	ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (val & SC2731_CHARGE_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	return POWER_SUPPLY_STATUS_CHARGING;
+}
+
+static int sc2731_charger_get_current(struct sc2731_charger_info *info,
+				      u32 *cur)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val);
+	if (ret)
+		return ret;
+
+	val &= SC2731_CUR_MASK;
+	*cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG;
+
+	return 0;
+}
+
+static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info,
+					    u32 *cur)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val);
+	if (ret)
+		return ret;
+
+	val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT;
+
+	switch (val) {
+	case 0:
+		*cur = SC2731_CURRENT_LIMIT_100;
+		break;
+
+	case 1:
+		*cur = SC2731_CURRENT_LIMIT_2000;
+		break;
+
+	case 2:
+		*cur = SC2731_CURRENT_LIMIT_900;
+		break;
+
+	case 3:
+		*cur = SC2731_CURRENT_LIMIT_500;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+sc2731_charger_usb_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
+	int ret;
+
+	mutex_lock(&info->lock);
+
+	if (!info->charging) {
+		mutex_unlock(&info->lock);
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = sc2731_charger_set_current(info, val->intval / 1000);
+		if (ret < 0)
+			dev_err(info->dev, "set charge current failed\n");
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = sc2731_charger_set_current_limit(info,
+						       val->intval / 1000);
+		if (ret < 0)
+			dev_err(info->dev, "set input current limit failed\n");
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int sc2731_charger_usb_get_property(struct power_supply *psy,
+					   enum power_supply_property psp,
+					   union power_supply_propval *val)
+{
+	struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
+	int ret = 0;
+	u32 cur;
+
+	mutex_lock(&info->lock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (info->charging)
+			val->intval = sc2731_charger_get_status(info);
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		if (!info->charging) {
+			val->intval = 0;
+		} else {
+			ret = sc2731_charger_get_current(info, &cur);
+			if (ret)
+				goto out;
+
+			val->intval = cur * 1000;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (!info->charging) {
+			val->intval = 0;
+		} else {
+			ret = sc2731_charger_get_current_limit(info, &cur);
+			if (ret)
+				goto out;
+
+			val->intval = cur * 1000;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&info->lock);
+	return ret;
+}
+
+static int sc2731_charger_property_is_writeable(struct power_supply *psy,
+						enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		ret = 1;
+		break;
+
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property sc2731_usb_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc sc2731_charger_desc = {
+	.name			= "sc2731_charger",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.properties		= sc2731_usb_props,
+	.num_properties		= ARRAY_SIZE(sc2731_usb_props),
+	.get_property		= sc2731_charger_usb_get_property,
+	.set_property		= sc2731_charger_usb_set_property,
+	.property_is_writeable	= sc2731_charger_property_is_writeable,
+};
+
+static void sc2731_charger_work(struct work_struct *data)
+{
+	struct sc2731_charger_info *info =
+		container_of(data, struct sc2731_charger_info, work);
+	int ret;
+
+	mutex_lock(&info->lock);
+
+	if (info->limit > 0 && !info->charging) {
+		/* set current limitation and start to charge */
+		ret = sc2731_charger_set_current_limit(info, info->limit);
+		if (ret)
+			goto out;
+
+		ret = sc2731_charger_set_current(info, info->limit);
+		if (ret)
+			goto out;
+
+		ret = sc2731_charger_start_charge(info);
+		if (ret)
+			goto out;
+
+		info->charging = true;
+	} else if (!info->limit && info->charging) {
+		/* Stop charging */
+		info->charging = false;
+		sc2731_charger_stop_charge(info);
+	}
+
+out:
+	mutex_unlock(&info->lock);
+}
+
+static int sc2731_charger_usb_change(struct notifier_block *nb,
+				     unsigned long limit, void *data)
+{
+	struct sc2731_charger_info *info =
+		container_of(nb, struct sc2731_charger_info, usb_notify);
+
+	info->limit = limit;
+
+	schedule_work(&info->work);
+
+	return NOTIFY_OK;
+}
+
+static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
+{
+	struct power_supply_battery_info *bat_info;
+	u32 term_currrent, term_voltage, cur_val, vol_val;
+	int ret;
+
+	/* Enable charger module */
+	ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
+				 SC2731_CHARGE_EN, SC2731_CHARGE_EN);
+	if (ret)
+		return ret;
+
+	ret = power_supply_get_battery_info(info->psy_usb, &bat_info);
+	if (ret) {
+		dev_warn(info->dev, "no battery information is supplied\n");
+
+		/*
+		 * If no battery information is supplied, we should set
+		 * default charge termination current to 120 mA, and default
+		 * charge termination voltage to 4.35V.
+		 */
+		cur_val = 0x2;
+		vol_val = 0x1;
+	} else {
+		term_currrent = bat_info->charge_term_current_ua / 1000;
+
+		if (term_currrent <= 90)
+			cur_val = 0;
+		else if (term_currrent >= 265)
+			cur_val = 0x7;
+		else
+			cur_val = ((term_currrent - 90) / 25) + 1;
+
+		term_voltage = bat_info->constant_charge_voltage_max_uv / 1000;
+
+		if (term_voltage > 4500)
+			term_voltage = 4500;
+
+		if (term_voltage > 4200)
+			vol_val = (term_voltage - 4200) / 100;
+		else
+			vol_val = 0;
+
+		power_supply_put_battery_info(info->psy_usb, bat_info);
+	}
+
+	/* Set charge termination current */
+	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
+				 SC2731_TERMINATION_CUR_MASK, cur_val);
+	if (ret)
+		goto error;
+
+	/* Set charge termination voltage */
+	ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+				 SC2731_TERMINATION_VOL_MASK |
+				 SC2731_TERMINATION_VOL_CAL_MASK,
+				 (vol_val << SC2731_TERMINATION_VOL_SHIFT) |
+				 (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT));
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0);
+	return ret;
+}
+
+static void sc2731_charger_detect_status(struct sc2731_charger_info *info)
+{
+	unsigned int min, max;
+
+	/*
+	 * If the USB charger status has been USB_CHARGER_PRESENT before
+	 * registering the notifier, we should start to charge with getting
+	 * the charge current.
+	 */
+	if (info->usb_phy->chg_state != USB_CHARGER_PRESENT)
+		return;
+
+	usb_phy_get_charger_current(info->usb_phy, &min, &max);
+	info->limit = min;
+
+	schedule_work(&info->work);
+}
+
+static int sc2731_charger_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sc2731_charger_info *info;
+	struct power_supply_config charger_cfg = { };
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	mutex_init(&info->lock);
+	info->dev = &pdev->dev;
+	INIT_WORK(&info->work, sc2731_charger_work);
+
+	info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!info->regmap) {
+		dev_err(&pdev->dev, "failed to get charger regmap\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(np, "reg", &info->base);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get register address\n");
+		return -ENODEV;
+	}
+
+	charger_cfg.drv_data = info;
+	charger_cfg.of_node = np;
+	info->psy_usb = devm_power_supply_register(&pdev->dev,
+						   &sc2731_charger_desc,
+						   &charger_cfg);
+	if (IS_ERR(info->psy_usb)) {
+		dev_err(&pdev->dev, "failed to register power supply\n");
+		return PTR_ERR(info->psy_usb);
+	}
+
+	ret = sc2731_charger_hw_init(info);
+	if (ret)
+		return ret;
+
+	info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
+	if (IS_ERR(info->usb_phy)) {
+		dev_err(&pdev->dev, "failed to find USB phy\n");
+		return PTR_ERR(info->usb_phy);
+	}
+
+	info->usb_notify.notifier_call = sc2731_charger_usb_change;
+	ret = usb_register_notifier(info->usb_phy, &info->usb_notify);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	sc2731_charger_detect_status(info);
+
+	return 0;
+}
+
+static int sc2731_charger_remove(struct platform_device *pdev)
+{
+	struct sc2731_charger_info *info = platform_get_drvdata(pdev);
+
+	usb_unregister_notifier(info->usb_phy, &info->usb_notify);
+
+	return 0;
+}
+
+static const struct of_device_id sc2731_charger_of_match[] = {
+	{ .compatible = "sprd,sc2731-charger", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);
+
+static struct platform_driver sc2731_charger_driver = {
+	.driver = {
+		.name = "sc2731-charger",
+		.of_match_table = sc2731_charger_of_match,
+	},
+	.probe = sc2731_charger_probe,
+	.remove = sc2731_charger_remove,
+};
+
+module_platform_driver(sc2731_charger_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
new file mode 100644
index 000000000..bd23c4d9f
--- /dev/null
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -0,0 +1,1350 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* PMIC global control registers definition */
+#define SC27XX_MODULE_EN0		0xc08
+#define SC27XX_CLK_EN0			0xc18
+#define SC27XX_FGU_EN			BIT(7)
+#define SC27XX_FGU_RTC_EN		BIT(6)
+
+/* FGU registers definition */
+#define SC27XX_FGU_START		0x0
+#define SC27XX_FGU_CONFIG		0x4
+#define SC27XX_FGU_ADC_CONFIG		0x8
+#define SC27XX_FGU_STATUS		0xc
+#define SC27XX_FGU_INT_EN		0x10
+#define SC27XX_FGU_INT_CLR		0x14
+#define SC27XX_FGU_INT_STS		0x1c
+#define SC27XX_FGU_VOLTAGE		0x20
+#define SC27XX_FGU_OCV			0x24
+#define SC27XX_FGU_POCV			0x28
+#define SC27XX_FGU_CURRENT		0x2c
+#define SC27XX_FGU_LOW_OVERLOAD		0x34
+#define SC27XX_FGU_CLBCNT_SETH		0x50
+#define SC27XX_FGU_CLBCNT_SETL		0x54
+#define SC27XX_FGU_CLBCNT_DELTH		0x58
+#define SC27XX_FGU_CLBCNT_DELTL		0x5c
+#define SC27XX_FGU_CLBCNT_VALH		0x68
+#define SC27XX_FGU_CLBCNT_VALL		0x6c
+#define SC27XX_FGU_CLBCNT_QMAXL		0x74
+#define SC27XX_FGU_USER_AREA_SET	0xa0
+#define SC27XX_FGU_USER_AREA_CLEAR	0xa4
+#define SC27XX_FGU_USER_AREA_STATUS	0xa8
+#define SC27XX_FGU_VOLTAGE_BUF		0xd0
+#define SC27XX_FGU_CURRENT_BUF		0xf0
+
+#define SC27XX_WRITE_SELCLB_EN		BIT(0)
+#define SC27XX_FGU_CLBCNT_MASK		GENMASK(15, 0)
+#define SC27XX_FGU_CLBCNT_SHIFT		16
+#define SC27XX_FGU_LOW_OVERLOAD_MASK	GENMASK(12, 0)
+
+#define SC27XX_FGU_INT_MASK		GENMASK(9, 0)
+#define SC27XX_FGU_LOW_OVERLOAD_INT	BIT(0)
+#define SC27XX_FGU_CLBCNT_DELTA_INT	BIT(2)
+
+#define SC27XX_FGU_MODE_AREA_MASK	GENMASK(15, 12)
+#define SC27XX_FGU_CAP_AREA_MASK	GENMASK(11, 0)
+#define SC27XX_FGU_MODE_AREA_SHIFT	12
+
+#define SC27XX_FGU_FIRST_POWERTON	GENMASK(3, 0)
+#define SC27XX_FGU_DEFAULT_CAP		GENMASK(11, 0)
+#define SC27XX_FGU_NORMAIL_POWERTON	0x5
+
+#define SC27XX_FGU_CUR_BASIC_ADC	8192
+#define SC27XX_FGU_SAMPLE_HZ		2
+/* micro Ohms */
+#define SC27XX_FGU_IDEAL_RESISTANCE	20000
+
+/*
+ * struct sc27xx_fgu_data: describe the FGU device
+ * @regmap: regmap for register access
+ * @dev: platform device
+ * @battery: battery power supply
+ * @base: the base offset for the controller
+ * @lock: protect the structure
+ * @gpiod: GPIO for battery detection
+ * @channel: IIO channel to get battery temperature
+ * @charge_chan: IIO channel to get charge voltage
+ * @internal_resist: the battery internal resistance in mOhm
+ * @total_cap: the total capacity of the battery in mAh
+ * @init_cap: the initial capacity of the battery in mAh
+ * @alarm_cap: the alarm capacity
+ * @init_clbcnt: the initial coulomb counter
+ * @max_volt: the maximum constant input voltage in millivolt
+ * @min_volt: the minimum drained battery voltage in microvolt
+ * @boot_volt: the voltage measured during boot in microvolt
+ * @table_len: the capacity table length
+ * @resist_table_len: the resistance table length
+ * @cur_1000ma_adc: ADC value corresponding to 1000 mA
+ * @vol_1000mv_adc: ADC value corresponding to 1000 mV
+ * @calib_resist: the real resistance of coulomb counter chip in uOhm
+ * @cap_table: capacity table with corresponding ocv
+ * @resist_table: resistance percent table with corresponding temperature
+ */
+struct sc27xx_fgu_data {
+	struct regmap *regmap;
+	struct device *dev;
+	struct power_supply *battery;
+	u32 base;
+	struct mutex lock;
+	struct gpio_desc *gpiod;
+	struct iio_channel *channel;
+	struct iio_channel *charge_chan;
+	bool bat_present;
+	int internal_resist;
+	int total_cap;
+	int init_cap;
+	int alarm_cap;
+	int init_clbcnt;
+	int max_volt;
+	int min_volt;
+	int boot_volt;
+	int table_len;
+	int resist_table_len;
+	int cur_1000ma_adc;
+	int vol_1000mv_adc;
+	int calib_resist;
+	struct power_supply_battery_ocv_table *cap_table;
+	struct power_supply_resistance_temp_table *resist_table;
+};
+
+static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity);
+static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
+					    int cap, bool int_mode);
+static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap);
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp);
+
+static const char * const sc27xx_charger_supply_name[] = {
+	"sc2731_charger",
+	"sc2720_charger",
+	"sc2721_charger",
+	"sc2723_charger",
+};
+
+static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, s64 adc)
+{
+	return DIV_S64_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc);
+}
+
+static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, s64 adc)
+{
+	return DIV_S64_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc);
+}
+
+static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol)
+{
+	return DIV_ROUND_CLOSEST(vol * data->vol_1000mv_adc, 1000);
+}
+
+static bool sc27xx_fgu_is_first_poweron(struct sc27xx_fgu_data *data)
+{
+	int ret, status, cap, mode;
+
+	ret = regmap_read(data->regmap,
+			  data->base + SC27XX_FGU_USER_AREA_STATUS, &status);
+	if (ret)
+		return false;
+
+	/*
+	 * We use low 4 bits to save the last battery capacity and high 12 bits
+	 * to save the system boot mode.
+	 */
+	mode = (status & SC27XX_FGU_MODE_AREA_MASK) >> SC27XX_FGU_MODE_AREA_SHIFT;
+	cap = status & SC27XX_FGU_CAP_AREA_MASK;
+
+	/*
+	 * When FGU has been powered down, the user area registers became
+	 * default value (0xffff), which can be used to valid if the system is
+	 * first power on or not.
+	 */
+	if (mode == SC27XX_FGU_FIRST_POWERTON || cap == SC27XX_FGU_DEFAULT_CAP)
+		return true;
+
+	return false;
+}
+
+static int sc27xx_fgu_save_boot_mode(struct sc27xx_fgu_data *data,
+				     int boot_mode)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_USER_AREA_CLEAR,
+				 SC27XX_FGU_MODE_AREA_MASK,
+				 SC27XX_FGU_MODE_AREA_MASK);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since the user area registers are put on power always-on region,
+	 * then these registers changing time will be a little long. Thus
+	 * here we should delay 200us to wait until values are updated
+	 * successfully according to the datasheet.
+	 */
+	udelay(200);
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_USER_AREA_SET,
+				 SC27XX_FGU_MODE_AREA_MASK,
+				 boot_mode << SC27XX_FGU_MODE_AREA_SHIFT);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since the user area registers are put on power always-on region,
+	 * then these registers changing time will be a little long. Thus
+	 * here we should delay 200us to wait until values are updated
+	 * successfully according to the datasheet.
+	 */
+	udelay(200);
+
+	/*
+	 * According to the datasheet, we should set the USER_AREA_CLEAR to 0 to
+	 * make the user area data available, otherwise we can not save the user
+	 * area data.
+	 */
+	return regmap_update_bits(data->regmap,
+				  data->base + SC27XX_FGU_USER_AREA_CLEAR,
+				  SC27XX_FGU_MODE_AREA_MASK, 0);
+}
+
+static int sc27xx_fgu_save_last_cap(struct sc27xx_fgu_data *data, int cap)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_USER_AREA_CLEAR,
+				 SC27XX_FGU_CAP_AREA_MASK,
+				 SC27XX_FGU_CAP_AREA_MASK);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since the user area registers are put on power always-on region,
+	 * then these registers changing time will be a little long. Thus
+	 * here we should delay 200us to wait until values are updated
+	 * successfully according to the datasheet.
+	 */
+	udelay(200);
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_USER_AREA_SET,
+				 SC27XX_FGU_CAP_AREA_MASK, cap);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since the user area registers are put on power always-on region,
+	 * then these registers changing time will be a little long. Thus
+	 * here we should delay 200us to wait until values are updated
+	 * successfully according to the datasheet.
+	 */
+	udelay(200);
+
+	/*
+	 * According to the datasheet, we should set the USER_AREA_CLEAR to 0 to
+	 * make the user area data available, otherwise we can not save the user
+	 * area data.
+	 */
+	return regmap_update_bits(data->regmap,
+				  data->base + SC27XX_FGU_USER_AREA_CLEAR,
+				  SC27XX_FGU_CAP_AREA_MASK, 0);
+}
+
+static int sc27xx_fgu_read_last_cap(struct sc27xx_fgu_data *data, int *cap)
+{
+	int ret, value;
+
+	ret = regmap_read(data->regmap,
+			  data->base + SC27XX_FGU_USER_AREA_STATUS, &value);
+	if (ret)
+		return ret;
+
+	*cap = value & SC27XX_FGU_CAP_AREA_MASK;
+	return 0;
+}
+
+/*
+ * When system boots on, we can not read battery capacity from coulomb
+ * registers, since now the coulomb registers are invalid. So we should
+ * calculate the battery open circuit voltage, and get current battery
+ * capacity according to the capacity table.
+ */
+static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
+{
+	int volt, cur, oci, ocv, ret;
+	bool is_first_poweron = sc27xx_fgu_is_first_poweron(data);
+
+	/*
+	 * If system is not the first power on, we should use the last saved
+	 * battery capacity as the initial battery capacity. Otherwise we should
+	 * re-calculate the initial battery capacity.
+	 */
+	if (!is_first_poweron) {
+		ret = sc27xx_fgu_read_last_cap(data, cap);
+		if (ret)
+			return ret;
+
+		return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
+	}
+
+	/*
+	 * After system booting on, the SC27XX_FGU_CLBCNT_QMAXL register saved
+	 * the first sampled open circuit current.
+	 */
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_QMAXL,
+			  &cur);
+	if (ret)
+		return ret;
+
+	cur <<= 1;
+	oci = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+	/*
+	 * Should get the OCV from SC27XX_FGU_POCV register at the system
+	 * beginning. It is ADC values reading from registers which need to
+	 * convert the corresponding voltage.
+	 */
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_POCV, &volt);
+	if (ret)
+		return ret;
+
+	volt = sc27xx_fgu_adc_to_voltage(data, volt);
+	ocv = volt * 1000 - oci * data->internal_resist;
+	data->boot_volt = ocv;
+
+	/*
+	 * Parse the capacity table to look up the correct capacity percent
+	 * according to current battery's corresponding OCV values.
+	 */
+	*cap = power_supply_ocv2cap_simple(data->cap_table, data->table_len,
+					   ocv);
+
+	ret = sc27xx_fgu_save_last_cap(data, *cap);
+	if (ret)
+		return ret;
+
+	return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
+}
+
+static int sc27xx_fgu_set_clbcnt(struct sc27xx_fgu_data *data, int clbcnt)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_CLBCNT_SETL,
+				 SC27XX_FGU_CLBCNT_MASK, clbcnt);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(data->regmap,
+				 data->base + SC27XX_FGU_CLBCNT_SETH,
+				 SC27XX_FGU_CLBCNT_MASK,
+				 clbcnt >> SC27XX_FGU_CLBCNT_SHIFT);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(data->regmap, data->base + SC27XX_FGU_START,
+				 SC27XX_WRITE_SELCLB_EN,
+				 SC27XX_WRITE_SELCLB_EN);
+}
+
+static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt)
+{
+	int ccl, cch, ret;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALL,
+			  &ccl);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALH,
+			  &cch);
+	if (ret)
+		return ret;
+
+	*clb_cnt = ccl & SC27XX_FGU_CLBCNT_MASK;
+	*clb_cnt |= (cch & SC27XX_FGU_CLBCNT_MASK) << SC27XX_FGU_CLBCNT_SHIFT;
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_vol_now(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret;
+	u32 vol;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE_BUF,
+			  &vol);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding voltage values.
+	 */
+	*val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_cur_now(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret;
+	u32 cur;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT_BUF,
+			  &cur);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding current values.
+	 */
+	*val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap)
+{
+	int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp;
+
+	/* Get current coulomb counters firstly */
+	ret = sc27xx_fgu_get_clbcnt(data, &cur_clbcnt);
+	if (ret)
+		return ret;
+
+	delta_clbcnt = cur_clbcnt - data->init_clbcnt;
+
+	/*
+	 * Convert coulomb counter to delta capacity (mAh), and set multiplier
+	 * as 10 to improve the precision.
+	 */
+	temp = DIV_ROUND_CLOSEST(delta_clbcnt * 10, 36 * SC27XX_FGU_SAMPLE_HZ);
+	temp = sc27xx_fgu_adc_to_current(data, temp / 1000);
+
+	/*
+	 * Convert to capacity percent of the battery total capacity,
+	 * and multiplier is 100 too.
+	 */
+	delta_cap = DIV_ROUND_CLOSEST(temp * 100, data->total_cap);
+	*cap = delta_cap + data->init_cap;
+
+	/* Calibrate the battery capacity in a normal range. */
+	sc27xx_fgu_capacity_calibration(data, *cap, false);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_vbat_vol(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret, vol;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE, &vol);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding voltage values.
+	 */
+	*val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret, cur;
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT, &cur);
+	if (ret)
+		return ret;
+
+	/*
+	 * It is ADC values reading from registers which need to convert to
+	 * corresponding current values.
+	 */
+	*val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
+{
+	int vol, cur, ret, temp, resistance;
+
+	ret = sc27xx_fgu_get_vbat_vol(data, &vol);
+	if (ret)
+		return ret;
+
+	ret = sc27xx_fgu_get_current(data, &cur);
+	if (ret)
+		return ret;
+
+	resistance = data->internal_resist;
+	if (data->resist_table_len > 0) {
+		ret = sc27xx_fgu_get_temp(data, &temp);
+		if (ret)
+			return ret;
+
+		resistance = power_supply_temp2resist_simple(data->resist_table,
+						data->resist_table_len, temp);
+		resistance = data->internal_resist * resistance / 100;
+	}
+
+	/* Return the battery OCV in micro volts. */
+	*val = vol * 1000 - cur * resistance;
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_charge_vol(struct sc27xx_fgu_data *data, int *val)
+{
+	int ret, vol;
+
+	ret = iio_read_channel_processed(data->charge_chan, &vol);
+	if (ret < 0)
+		return ret;
+
+	*val = vol * 1000;
+	return 0;
+}
+
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp)
+{
+	return iio_read_channel_processed(data->channel, temp);
+}
+
+static int sc27xx_fgu_get_health(struct sc27xx_fgu_data *data, int *health)
+{
+	int ret, vol;
+
+	ret = sc27xx_fgu_get_vbat_vol(data, &vol);
+	if (ret)
+		return ret;
+
+	if (vol > data->max_volt)
+		*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else
+		*health = POWER_SUPPLY_HEALTH_GOOD;
+
+	return 0;
+}
+
+static int sc27xx_fgu_get_status(struct sc27xx_fgu_data *data, int *status)
+{
+	union power_supply_propval val;
+	struct power_supply *psy;
+	int i, ret = -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(sc27xx_charger_supply_name); i++) {
+		psy = power_supply_get_by_name(sc27xx_charger_supply_name[i]);
+		if (!psy)
+			continue;
+
+		ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS,
+						&val);
+		power_supply_put(psy);
+		if (ret)
+			return ret;
+
+		*status = val.intval;
+	}
+
+	return ret;
+}
+
+static int sc27xx_fgu_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
+	int ret = 0;
+	int value;
+
+	mutex_lock(&data->lock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = sc27xx_fgu_get_status(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = sc27xx_fgu_get_health(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = data->bat_present;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = sc27xx_fgu_get_temp(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = sc27xx_fgu_get_capacity(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = sc27xx_fgu_get_vbat_vol(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		ret = sc27xx_fgu_get_vbat_ocv(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = sc27xx_fgu_get_charge_vol(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = sc27xx_fgu_get_current(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		val->intval = data->total_cap * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = sc27xx_fgu_get_clbcnt(data, &value);
+		if (ret)
+			goto error;
+
+		value = DIV_ROUND_CLOSEST(value * 10,
+					  36 * SC27XX_FGU_SAMPLE_HZ);
+		val->intval = sc27xx_fgu_adc_to_current(data, value);
+
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = sc27xx_fgu_get_vol_now(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = sc27xx_fgu_get_cur_now(data, &value);
+		if (ret)
+			goto error;
+
+		val->intval = value * 1000;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
+		val->intval = data->boot_volt;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+error:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int sc27xx_fgu_set_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   const union power_supply_propval *val)
+{
+	struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = sc27xx_fgu_save_last_cap(data, val->intval);
+		if (ret < 0)
+			dev_err(data->dev, "failed to save battery capacity\n");
+		break;
+
+	case POWER_SUPPLY_PROP_CALIBRATE:
+		sc27xx_fgu_adjust_cap(data, val->intval);
+		ret = 0;
+		break;
+
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		data->total_cap = val->intval / 1000;
+		ret = 0;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
+					    enum power_supply_property psp)
+{
+	return psp == POWER_SUPPLY_PROP_CAPACITY ||
+		psp == POWER_SUPPLY_PROP_CALIBRATE ||
+		psp == POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+}
+
+static enum power_supply_property sc27xx_fgu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_BOOT,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CALIBRATE,
+	POWER_SUPPLY_PROP_CHARGE_NOW
+};
+
+static const struct power_supply_desc sc27xx_fgu_desc = {
+	.name			= "sc27xx-fgu",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= sc27xx_fgu_props,
+	.num_properties		= ARRAY_SIZE(sc27xx_fgu_props),
+	.get_property		= sc27xx_fgu_get_property,
+	.set_property		= sc27xx_fgu_set_property,
+	.external_power_changed	= power_supply_changed,
+	.property_is_writeable	= sc27xx_fgu_property_is_writeable,
+	.no_thermal		= true,
+};
+
+static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap)
+{
+	int ret;
+
+	data->init_cap = cap;
+	ret = sc27xx_fgu_get_clbcnt(data, &data->init_clbcnt);
+	if (ret)
+		dev_err(data->dev, "failed to get init coulomb counter\n");
+}
+
+static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
+					    int cap, bool int_mode)
+{
+	int ret, ocv, chg_sts, adc;
+
+	ret = sc27xx_fgu_get_vbat_ocv(data, &ocv);
+	if (ret) {
+		dev_err(data->dev, "get battery ocv error.\n");
+		return;
+	}
+
+	ret = sc27xx_fgu_get_status(data, &chg_sts);
+	if (ret) {
+		dev_err(data->dev, "get charger status error.\n");
+		return;
+	}
+
+	/*
+	 * If we are in charging mode, then we do not need to calibrate the
+	 * lower capacity.
+	 */
+	if (chg_sts == POWER_SUPPLY_STATUS_CHARGING)
+		return;
+
+	if ((ocv > data->cap_table[0].ocv && cap < 100) || cap > 100) {
+		/*
+		 * If current OCV value is larger than the max OCV value in
+		 * OCV table, or the current capacity is larger than 100,
+		 * we should force the inititial capacity to 100.
+		 */
+		sc27xx_fgu_adjust_cap(data, 100);
+	} else if (ocv <= data->cap_table[data->table_len - 1].ocv) {
+		/*
+		 * If current OCV value is leass than the minimum OCV value in
+		 * OCV table, we should force the inititial capacity to 0.
+		 */
+		sc27xx_fgu_adjust_cap(data, 0);
+	} else if ((ocv > data->cap_table[data->table_len - 1].ocv && cap <= 0) ||
+		   (ocv > data->min_volt && cap <= data->alarm_cap)) {
+		/*
+		 * If current OCV value is not matchable with current capacity,
+		 * we should re-calculate current capacity by looking up the
+		 * OCV table.
+		 */
+		int cur_cap = power_supply_ocv2cap_simple(data->cap_table,
+							  data->table_len, ocv);
+
+		sc27xx_fgu_adjust_cap(data, cur_cap);
+	} else if (ocv <= data->min_volt) {
+		/*
+		 * If current OCV value is less than the low alarm voltage, but
+		 * current capacity is larger than the alarm capacity, we should
+		 * adjust the inititial capacity to alarm capacity.
+		 */
+		if (cap > data->alarm_cap) {
+			sc27xx_fgu_adjust_cap(data, data->alarm_cap);
+		} else {
+			int cur_cap;
+
+			/*
+			 * If current capacity is equal with 0 or less than 0
+			 * (some error occurs), we should adjust inititial
+			 * capacity to the capacity corresponding to current OCV
+			 * value.
+			 */
+			cur_cap = power_supply_ocv2cap_simple(data->cap_table,
+							      data->table_len,
+							      ocv);
+			sc27xx_fgu_adjust_cap(data, cur_cap);
+		}
+
+		if (!int_mode)
+			return;
+
+		/*
+		 * After adjusting the battery capacity, we should set the
+		 * lowest alarm voltage instead.
+		 */
+		data->min_volt = data->cap_table[data->table_len - 1].ocv;
+		data->alarm_cap = power_supply_ocv2cap_simple(data->cap_table,
+							      data->table_len,
+							      data->min_volt);
+
+		adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000);
+		regmap_update_bits(data->regmap,
+				   data->base + SC27XX_FGU_LOW_OVERLOAD,
+				   SC27XX_FGU_LOW_OVERLOAD_MASK, adc);
+	}
+}
+
+static irqreturn_t sc27xx_fgu_interrupt(int irq, void *dev_id)
+{
+	struct sc27xx_fgu_data *data = dev_id;
+	int ret, cap;
+	u32 status;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_read(data->regmap, data->base + SC27XX_FGU_INT_STS,
+			  &status);
+	if (ret)
+		goto out;
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR,
+				 status, status);
+	if (ret)
+		goto out;
+
+	/*
+	 * When low overload voltage interrupt happens, we should calibrate the
+	 * battery capacity in lower voltage stage.
+	 */
+	if (!(status & SC27XX_FGU_LOW_OVERLOAD_INT))
+		goto out;
+
+	ret = sc27xx_fgu_get_capacity(data, &cap);
+	if (ret)
+		goto out;
+
+	sc27xx_fgu_capacity_calibration(data, cap, true);
+
+out:
+	mutex_unlock(&data->lock);
+
+	power_supply_changed(data->battery);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sc27xx_fgu_bat_detection(int irq, void *dev_id)
+{
+	struct sc27xx_fgu_data *data = dev_id;
+	int state;
+
+	mutex_lock(&data->lock);
+
+	state = gpiod_get_value_cansleep(data->gpiod);
+	if (state < 0) {
+		dev_err(data->dev, "failed to get gpio state\n");
+		mutex_unlock(&data->lock);
+		return IRQ_RETVAL(state);
+	}
+
+	data->bat_present = !!state;
+
+	mutex_unlock(&data->lock);
+
+	power_supply_changed(data->battery);
+	return IRQ_HANDLED;
+}
+
+static void sc27xx_fgu_disable(void *_data)
+{
+	struct sc27xx_fgu_data *data = _data;
+
+	regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0);
+	regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0);
+}
+
+static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity)
+{
+	/*
+	 * Get current capacity (mAh) = battery total capacity (mAh) *
+	 * current capacity percent (capacity / 100).
+	 */
+	int cur_cap = DIV_ROUND_CLOSEST(data->total_cap * capacity, 100);
+
+	/*
+	 * Convert current capacity (mAh) to coulomb counter according to the
+	 * formula: 1 mAh =3.6 coulomb.
+	 */
+	return DIV_ROUND_CLOSEST(cur_cap * 36 * data->cur_1000ma_adc * SC27XX_FGU_SAMPLE_HZ, 10);
+}
+
+static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data)
+{
+	struct nvmem_cell *cell;
+	int calib_data, cal_4200mv;
+	void *buf;
+	size_t len;
+
+	cell = nvmem_cell_get(data->dev, "fgu_calib");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	memcpy(&calib_data, buf, min(len, sizeof(u32)));
+
+	/*
+	 * Get the ADC value corresponding to 4200 mV from eFuse controller
+	 * according to below formula. Then convert to ADC values corresponding
+	 * to 1000 mV and 1000 mA.
+	 */
+	cal_4200mv = (calib_data & 0x1ff) + 6963 - 4096 - 256;
+	data->vol_1000mv_adc = DIV_ROUND_CLOSEST(cal_4200mv * 10, 42);
+	data->cur_1000ma_adc =
+		DIV_ROUND_CLOSEST(data->vol_1000mv_adc * 4 * data->calib_resist,
+				  SC27XX_FGU_IDEAL_RESISTANCE);
+
+	kfree(buf);
+	return 0;
+}
+
+static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
+{
+	struct power_supply_battery_info *info;
+	struct power_supply_battery_ocv_table *table;
+	int ret, delta_clbcnt, alarm_adc;
+
+	ret = power_supply_get_battery_info(data->battery, &info);
+	if (ret) {
+		dev_err(data->dev, "failed to get battery information\n");
+		return ret;
+	}
+
+	data->total_cap = info->charge_full_design_uah / 1000;
+	data->max_volt = info->constant_charge_voltage_max_uv / 1000;
+	data->internal_resist = info->factory_internal_resistance_uohm / 1000;
+	data->min_volt = info->voltage_min_design_uv;
+
+	/*
+	 * For SC27XX fuel gauge device, we only use one ocv-capacity
+	 * table in normal temperature 20 Celsius.
+	 */
+	table = power_supply_find_ocv2cap_table(info, 20, &data->table_len);
+	if (!table)
+		return -EINVAL;
+
+	data->cap_table = devm_kmemdup(data->dev, table,
+				       data->table_len * sizeof(*table),
+				       GFP_KERNEL);
+	if (!data->cap_table) {
+		power_supply_put_battery_info(data->battery, info);
+		return -ENOMEM;
+	}
+
+	data->alarm_cap = power_supply_ocv2cap_simple(data->cap_table,
+						      data->table_len,
+						      data->min_volt);
+	if (!data->alarm_cap)
+		data->alarm_cap += 1;
+
+	data->resist_table_len = info->resist_table_size;
+	if (data->resist_table_len > 0) {
+		data->resist_table = devm_kmemdup(data->dev, info->resist_table,
+						  data->resist_table_len *
+						  sizeof(struct power_supply_resistance_temp_table),
+						  GFP_KERNEL);
+		if (!data->resist_table) {
+			power_supply_put_battery_info(data->battery, info);
+			return -ENOMEM;
+		}
+	}
+
+	power_supply_put_battery_info(data->battery, info);
+
+	ret = sc27xx_fgu_calibration(data);
+	if (ret)
+		return ret;
+
+	/* Enable the FGU module */
+	ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN0,
+				 SC27XX_FGU_EN, SC27XX_FGU_EN);
+	if (ret) {
+		dev_err(data->dev, "failed to enable fgu\n");
+		return ret;
+	}
+
+	/* Enable the FGU RTC clock to make it work */
+	ret = regmap_update_bits(data->regmap, SC27XX_CLK_EN0,
+				 SC27XX_FGU_RTC_EN, SC27XX_FGU_RTC_EN);
+	if (ret) {
+		dev_err(data->dev, "failed to enable fgu RTC clock\n");
+		goto disable_fgu;
+	}
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR,
+				 SC27XX_FGU_INT_MASK, SC27XX_FGU_INT_MASK);
+	if (ret) {
+		dev_err(data->dev, "failed to clear interrupt status\n");
+		goto disable_clk;
+	}
+
+	/*
+	 * Set the voltage low overload threshold, which means when the battery
+	 * voltage is lower than this threshold, the controller will generate
+	 * one interrupt to notify.
+	 */
+	alarm_adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000);
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_LOW_OVERLOAD,
+				 SC27XX_FGU_LOW_OVERLOAD_MASK, alarm_adc);
+	if (ret) {
+		dev_err(data->dev, "failed to set fgu low overload\n");
+		goto disable_clk;
+	}
+
+	/*
+	 * Set the coulomb counter delta threshold, that means when the coulomb
+	 * counter change is multiples of the delta threshold, the controller
+	 * will generate one interrupt to notify the users to update the battery
+	 * capacity. Now we set the delta threshold as a counter value of 1%
+	 * capacity.
+	 */
+	delta_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, 1);
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTL,
+				 SC27XX_FGU_CLBCNT_MASK, delta_clbcnt);
+	if (ret) {
+		dev_err(data->dev, "failed to set low delta coulomb counter\n");
+		goto disable_clk;
+	}
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTH,
+				 SC27XX_FGU_CLBCNT_MASK,
+				 delta_clbcnt >> SC27XX_FGU_CLBCNT_SHIFT);
+	if (ret) {
+		dev_err(data->dev, "failed to set high delta coulomb counter\n");
+		goto disable_clk;
+	}
+
+	/*
+	 * Get the boot battery capacity when system powers on, which is used to
+	 * initialize the coulomb counter. After that, we can read the coulomb
+	 * counter to measure the battery capacity.
+	 */
+	ret = sc27xx_fgu_get_boot_capacity(data, &data->init_cap);
+	if (ret) {
+		dev_err(data->dev, "failed to get boot capacity\n");
+		goto disable_clk;
+	}
+
+	/*
+	 * Convert battery capacity to the corresponding initial coulomb counter
+	 * and set into coulomb counter registers.
+	 */
+	data->init_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, data->init_cap);
+	ret = sc27xx_fgu_set_clbcnt(data, data->init_clbcnt);
+	if (ret) {
+		dev_err(data->dev, "failed to initialize coulomb counter\n");
+		goto disable_clk;
+	}
+
+	return 0;
+
+disable_clk:
+	regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0);
+disable_fgu:
+	regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0);
+
+	return ret;
+}
+
+static int sc27xx_fgu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct power_supply_config fgu_cfg = { };
+	struct sc27xx_fgu_data *data;
+	int ret, irq;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!data->regmap) {
+		dev_err(dev, "failed to get regmap\n");
+		return -ENODEV;
+	}
+
+	ret = device_property_read_u32(dev, "reg", &data->base);
+	if (ret) {
+		dev_err(dev, "failed to get fgu address\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(&pdev->dev,
+				       "sprd,calib-resistance-micro-ohms",
+				       &data->calib_resist);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to get fgu calibration resistance\n");
+		return ret;
+	}
+
+	data->channel = devm_iio_channel_get(dev, "bat-temp");
+	if (IS_ERR(data->channel)) {
+		dev_err(dev, "failed to get IIO channel\n");
+		return PTR_ERR(data->channel);
+	}
+
+	data->charge_chan = devm_iio_channel_get(dev, "charge-vol");
+	if (IS_ERR(data->charge_chan)) {
+		dev_err(dev, "failed to get charge IIO channel\n");
+		return PTR_ERR(data->charge_chan);
+	}
+
+	data->gpiod = devm_gpiod_get(dev, "bat-detect", GPIOD_IN);
+	if (IS_ERR(data->gpiod)) {
+		dev_err(dev, "failed to get battery detection GPIO\n");
+		return PTR_ERR(data->gpiod);
+	}
+
+	ret = gpiod_get_value_cansleep(data->gpiod);
+	if (ret < 0) {
+		dev_err(dev, "failed to get gpio state\n");
+		return ret;
+	}
+
+	data->bat_present = !!ret;
+	mutex_init(&data->lock);
+	data->dev = dev;
+	platform_set_drvdata(pdev, data);
+
+	fgu_cfg.drv_data = data;
+	fgu_cfg.of_node = np;
+	data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
+						   &fgu_cfg);
+	if (IS_ERR(data->battery)) {
+		dev_err(dev, "failed to register power supply\n");
+		return PTR_ERR(data->battery);
+	}
+
+	ret = sc27xx_fgu_hw_init(data);
+	if (ret) {
+		dev_err(dev, "failed to initialize fgu hardware\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, sc27xx_fgu_disable, data);
+	if (ret) {
+		dev_err(dev, "failed to add fgu disable action\n");
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_threaded_irq(data->dev, irq, NULL,
+					sc27xx_fgu_interrupt,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					pdev->name, data);
+	if (ret) {
+		dev_err(data->dev, "failed to request fgu IRQ\n");
+		return ret;
+	}
+
+	irq = gpiod_to_irq(data->gpiod);
+	if (irq < 0) {
+		dev_err(dev, "failed to translate GPIO to IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					sc27xx_fgu_bat_detection,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					pdev->name, data);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sc27xx_fgu_resume(struct device *dev)
+{
+	struct sc27xx_fgu_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+				 SC27XX_FGU_LOW_OVERLOAD_INT |
+				 SC27XX_FGU_CLBCNT_DELTA_INT, 0);
+	if (ret) {
+		dev_err(data->dev, "failed to disable fgu interrupts\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sc27xx_fgu_suspend(struct device *dev)
+{
+	struct sc27xx_fgu_data *data = dev_get_drvdata(dev);
+	int ret, status, ocv;
+
+	ret = sc27xx_fgu_get_status(data, &status);
+	if (ret)
+		return ret;
+
+	/*
+	 * If we are charging, then no need to enable the FGU interrupts to
+	 * adjust the battery capacity.
+	 */
+	if (status != POWER_SUPPLY_STATUS_NOT_CHARGING &&
+	    status != POWER_SUPPLY_STATUS_DISCHARGING)
+		return 0;
+
+	ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+				 SC27XX_FGU_LOW_OVERLOAD_INT,
+				 SC27XX_FGU_LOW_OVERLOAD_INT);
+	if (ret) {
+		dev_err(data->dev, "failed to enable low voltage interrupt\n");
+		return ret;
+	}
+
+	ret = sc27xx_fgu_get_vbat_ocv(data, &ocv);
+	if (ret)
+		goto disable_int;
+
+	/*
+	 * If current OCV is less than the minimum voltage, we should enable the
+	 * coulomb counter threshold interrupt to notify events to adjust the
+	 * battery capacity.
+	 */
+	if (ocv < data->min_volt) {
+		ret = regmap_update_bits(data->regmap,
+					 data->base + SC27XX_FGU_INT_EN,
+					 SC27XX_FGU_CLBCNT_DELTA_INT,
+					 SC27XX_FGU_CLBCNT_DELTA_INT);
+		if (ret) {
+			dev_err(data->dev,
+				"failed to enable coulomb threshold int\n");
+			goto disable_int;
+		}
+	}
+
+	return 0;
+
+disable_int:
+	regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+			   SC27XX_FGU_LOW_OVERLOAD_INT, 0);
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops sc27xx_fgu_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sc27xx_fgu_suspend, sc27xx_fgu_resume)
+};
+
+static const struct of_device_id sc27xx_fgu_of_match[] = {
+	{ .compatible = "sprd,sc2731-fgu", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sc27xx_fgu_of_match);
+
+static struct platform_driver sc27xx_fgu_driver = {
+	.probe = sc27xx_fgu_probe,
+	.driver = {
+		.name = "sc27xx-fgu",
+		.of_match_table = sc27xx_fgu_of_match,
+		.pm = &sc27xx_fgu_pm_ops,
+	}
+};
+
+module_platform_driver(sc27xx_fgu_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27XX PMICs Fual Gauge Unit Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
new file mode 100644
index 000000000..996a82f8a
--- /dev/null
+++ b/drivers/power/supply/smb347-charger.c
@@ -0,0 +1,1642 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Summit Microelectronics SMB347 Battery Charger Driver
+ *
+ * Copyright (C) 2011, Intel Corporation
+ *
+ * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
+ *          Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#include <dt-bindings/power/summit,smb347-charger.h>
+
+/* Use the default compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT -1
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB3XX_TEMP_USE_DEFAULT		-273
+
+/*
+ * Configuration registers. These are mirrored to volatile RAM and can be
+ * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be
+ * reloaded from non-volatile registers after POR.
+ */
+#define CFG_CHARGE_CURRENT			0x00
+#define CFG_CHARGE_CURRENT_FCC_MASK		0xe0
+#define CFG_CHARGE_CURRENT_FCC_SHIFT		5
+#define CFG_CHARGE_CURRENT_PCC_MASK		0x18
+#define CFG_CHARGE_CURRENT_PCC_SHIFT		3
+#define CFG_CHARGE_CURRENT_TC_MASK		0x07
+#define CFG_CURRENT_LIMIT			0x01
+#define CFG_CURRENT_LIMIT_DC_MASK		0xf0
+#define CFG_CURRENT_LIMIT_DC_SHIFT		4
+#define CFG_CURRENT_LIMIT_USB_MASK		0x0f
+#define CFG_FLOAT_VOLTAGE			0x03
+#define CFG_FLOAT_VOLTAGE_FLOAT_MASK		0x3f
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK	0xc0
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT	6
+#define CFG_STAT				0x05
+#define CFG_STAT_DISABLED			BIT(5)
+#define CFG_STAT_ACTIVE_HIGH			BIT(7)
+#define CFG_PIN					0x06
+#define CFG_PIN_EN_CTRL_MASK			0x60
+#define CFG_PIN_EN_CTRL_ACTIVE_HIGH		0x40
+#define CFG_PIN_EN_CTRL_ACTIVE_LOW		0x60
+#define CFG_PIN_EN_APSD_IRQ			BIT(1)
+#define CFG_PIN_EN_CHARGER_ERROR		BIT(2)
+#define CFG_PIN_EN_CTRL				BIT(4)
+#define CFG_THERM				0x07
+#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK	0x03
+#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT	0
+#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK	0x0c
+#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT	2
+#define CFG_THERM_MONITOR_DISABLED		BIT(4)
+#define CFG_SYSOK				0x08
+#define CFG_SYSOK_INOK_ACTIVE_HIGH		BIT(0)
+#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED	BIT(2)
+#define CFG_OTHER				0x09
+#define CFG_OTHER_RID_MASK			0xc0
+#define CFG_OTHER_RID_ENABLED_AUTO_OTG		0xc0
+#define CFG_OTG					0x0a
+#define CFG_OTG_TEMP_THRESHOLD_MASK		0x30
+#define CFG_OTG_CURRENT_LIMIT_250mA		BIT(2)
+#define CFG_OTG_CURRENT_LIMIT_750mA		BIT(3)
+#define CFG_OTG_TEMP_THRESHOLD_SHIFT		4
+#define CFG_OTG_CC_COMPENSATION_MASK		0xc0
+#define CFG_OTG_CC_COMPENSATION_SHIFT		6
+#define CFG_TEMP_LIMIT				0x0b
+#define CFG_TEMP_LIMIT_SOFT_HOT_MASK		0x03
+#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT		0
+#define CFG_TEMP_LIMIT_SOFT_COLD_MASK		0x0c
+#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT		2
+#define CFG_TEMP_LIMIT_HARD_HOT_MASK		0x30
+#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT		4
+#define CFG_TEMP_LIMIT_HARD_COLD_MASK		0xc0
+#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT		6
+#define CFG_FAULT_IRQ				0x0c
+#define CFG_FAULT_IRQ_DCIN_UV			BIT(2)
+#define CFG_STATUS_IRQ				0x0d
+#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER	BIT(4)
+#define CFG_STATUS_IRQ_CHARGE_TIMEOUT		BIT(7)
+#define CFG_ADDRESS				0x0e
+
+/* Command registers */
+#define CMD_A					0x30
+#define CMD_A_CHG_ENABLED			BIT(1)
+#define CMD_A_SUSPEND_ENABLED			BIT(2)
+#define CMD_A_OTG_ENABLED			BIT(4)
+#define CMD_A_ALLOW_WRITE			BIT(7)
+#define CMD_B					0x31
+#define CMD_C					0x33
+
+/* Interrupt Status registers */
+#define IRQSTAT_A				0x35
+#define IRQSTAT_C				0x37
+#define IRQSTAT_C_TERMINATION_STAT		BIT(0)
+#define IRQSTAT_C_TERMINATION_IRQ		BIT(1)
+#define IRQSTAT_C_TAPER_IRQ			BIT(3)
+#define IRQSTAT_D				0x38
+#define IRQSTAT_D_CHARGE_TIMEOUT_STAT		BIT(2)
+#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ		BIT(3)
+#define IRQSTAT_E				0x39
+#define IRQSTAT_E_USBIN_UV_STAT			BIT(0)
+#define IRQSTAT_E_USBIN_UV_IRQ			BIT(1)
+#define IRQSTAT_E_DCIN_UV_STAT			BIT(4)
+#define IRQSTAT_E_DCIN_UV_IRQ			BIT(5)
+#define IRQSTAT_F				0x3a
+
+/* Status registers */
+#define STAT_A					0x3b
+#define STAT_A_FLOAT_VOLTAGE_MASK		0x3f
+#define STAT_B					0x3c
+#define STAT_C					0x3d
+#define STAT_C_CHG_ENABLED			BIT(0)
+#define STAT_C_HOLDOFF_STAT			BIT(3)
+#define STAT_C_CHG_MASK				0x06
+#define STAT_C_CHG_SHIFT			1
+#define STAT_C_CHG_TERM				BIT(5)
+#define STAT_C_CHARGER_ERROR			BIT(6)
+#define STAT_E					0x3f
+
+#define SMB347_MAX_REGISTER			0x3f
+
+/**
+ * struct smb347_charger - smb347 charger instance
+ * @dev: pointer to device
+ * @regmap: pointer to driver regmap
+ * @mains: power_supply instance for AC/DC power
+ * @usb: power_supply instance for USB power
+ * @usb_rdev: USB VBUS regulator device
+ * @id: SMB charger ID
+ * @mains_online: is AC/DC input connected
+ * @usb_online: is USB input connected
+ * @irq_unsupported: is interrupt unsupported by SMB hardware
+ * @usb_vbus_enabled: is USB VBUS powered by SMB charger
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ *			 charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ *			 pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ *			  input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ *			 current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ *			  granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
+ *			 granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ *			  granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ *			 granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ *				  limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ *				 current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @enable_control: how charging enable/disable is controlled
+ *		    (driver/pin controls)
+ * @inok_polarity: polarity of INOK signal which denotes presence of external
+ *		   power supply
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB3XX_TEMP_USE_DEFAULT instead.
+ */
+struct smb347_charger {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct power_supply	*mains;
+	struct power_supply	*usb;
+	struct regulator_dev	*usb_rdev;
+	unsigned int		id;
+	bool			mains_online;
+	bool			usb_online;
+	bool			irq_unsupported;
+	bool			usb_vbus_enabled;
+
+	unsigned int		max_charge_current;
+	unsigned int		max_charge_voltage;
+	unsigned int		pre_charge_current;
+	unsigned int		termination_current;
+	unsigned int		pre_to_fast_voltage;
+	unsigned int		mains_current_limit;
+	unsigned int		usb_hc_current_limit;
+	unsigned int		chip_temp_threshold;
+	int			soft_cold_temp_limit;
+	int			soft_hot_temp_limit;
+	int			hard_cold_temp_limit;
+	int			hard_hot_temp_limit;
+	bool			suspend_on_hard_temp_limit;
+	unsigned int		soft_temp_limit_compensation;
+	unsigned int		charge_current_compensation;
+	bool			use_mains;
+	bool			use_usb;
+	bool			use_usb_otg;
+	unsigned int		enable_control;
+	unsigned int		inok_polarity;
+};
+
+enum smb_charger_chipid {
+	SMB345,
+	SMB347,
+	SMB358,
+	NUM_CHIP_TYPES,
+};
+
+/* Fast charge current in uA */
+static const unsigned int fcc_tbl[NUM_CHIP_TYPES][8] = {
+	[SMB345] = {  200000,  450000,  600000,  900000,
+		     1300000, 1500000, 1800000, 2000000 },
+	[SMB347] = {  700000,  900000, 1200000, 1500000,
+		     1800000, 2000000, 2200000, 2500000 },
+	[SMB358] = {  200000,  450000,  600000,  900000,
+		     1300000, 1500000, 1800000, 2000000 },
+};
+/* Pre-charge current in uA */
+static const unsigned int pcc_tbl[NUM_CHIP_TYPES][4] = {
+	[SMB345] = { 150000, 250000, 350000, 450000 },
+	[SMB347] = { 100000, 150000, 200000, 250000 },
+	[SMB358] = { 150000, 250000, 350000, 450000 },
+};
+
+/* Termination current in uA */
+static const unsigned int tc_tbl[NUM_CHIP_TYPES][8] = {
+	[SMB345] = {  30000,  40000,  60000,  80000,
+		     100000, 125000, 150000, 200000 },
+	[SMB347] = {  37500,  50000, 100000, 150000,
+		     200000, 250000, 500000, 600000 },
+	[SMB358] = {  30000,  40000,  60000,  80000,
+		     100000, 125000, 150000, 200000 },
+};
+
+/* Input current limit in uA */
+static const unsigned int icl_tbl[NUM_CHIP_TYPES][10] = {
+	[SMB345] = {  300000,  500000,  700000, 1000000, 1500000,
+		     1800000, 2000000, 2000000, 2000000, 2000000 },
+	[SMB347] = {  300000,  500000,  700000,  900000, 1200000,
+		     1500000, 1800000, 2000000, 2200000, 2500000 },
+	[SMB358] = {  300000,  500000,  700000, 1000000, 1500000,
+		     1800000, 2000000, 2000000, 2000000, 2000000 },
+};
+
+/* Charge current compensation in uA */
+static const unsigned int ccc_tbl[NUM_CHIP_TYPES][4] = {
+	[SMB345] = {  200000,  450000,  600000,  900000 },
+	[SMB347] = {  250000,  700000,  900000, 1200000 },
+	[SMB358] = {  200000,  450000,  600000,  900000 },
+};
+
+/* Convert register value to current using lookup table */
+static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val)
+{
+	if (val >= size)
+		return -EINVAL;
+	return tbl[val];
+}
+
+/* Convert current to register value using lookup table */
+static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val)
+{
+	size_t i;
+
+	for (i = 0; i < size; i++)
+		if (val < tbl[i])
+			break;
+	return i > 0 ? i - 1 : -EINVAL;
+}
+
+/**
+ * smb347_update_ps_status - refreshes the power source status
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function checks whether any power source is connected to the charger and
+ * updates internal state accordingly. If there is a change to previous state
+ * function returns %1, otherwise %0 and negative errno in case of errror.
+ */
+static int smb347_update_ps_status(struct smb347_charger *smb)
+{
+	bool usb = false;
+	bool dc = false;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(smb->regmap, IRQSTAT_E, &val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Dc and usb are set depending on whether they are enabled in
+	 * platform data _and_ whether corresponding undervoltage is set.
+	 */
+	if (smb->use_mains)
+		dc = !(val & IRQSTAT_E_DCIN_UV_STAT);
+	if (smb->use_usb)
+		usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
+
+	ret = smb->mains_online != dc || smb->usb_online != usb;
+	smb->mains_online = dc;
+	smb->usb_online = usb;
+
+	return ret;
+}
+
+/*
+ * smb347_is_ps_online - returns whether input power source is connected
+ * @smb: pointer to smb347 charger instance
+ *
+ * Returns %true if input power source is connected. Note that this is
+ * dependent on what platform has configured for usable power sources. For
+ * example if USB is disabled, this will return %false even if the USB cable
+ * is connected.
+ */
+static bool smb347_is_ps_online(struct smb347_charger *smb)
+{
+	return smb->usb_online || smb->mains_online;
+}
+
+/**
+ * smb347_charging_status - returns status of charging
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function returns charging status. %0 means no charging is in progress,
+ * %1 means pre-charging, %2 fast-charging and %3 taper-charging.
+ */
+static int smb347_charging_status(struct smb347_charger *smb)
+{
+	unsigned int val;
+	int ret;
+
+	if (!smb347_is_ps_online(smb))
+		return 0;
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return 0;
+
+	return (val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT;
+}
+
+static int smb347_charging_set(struct smb347_charger *smb, bool enable)
+{
+	if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
+		dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
+		return 0;
+	}
+
+	if (enable && smb->usb_vbus_enabled) {
+		dev_dbg(smb->dev, "charging not enabled because USB is in host mode\n");
+		return 0;
+	}
+
+	return regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+				  enable ? CMD_A_CHG_ENABLED : 0);
+}
+
+static inline int smb347_charging_enable(struct smb347_charger *smb)
+{
+	return smb347_charging_set(smb, true);
+}
+
+static inline int smb347_charging_disable(struct smb347_charger *smb)
+{
+	return smb347_charging_set(smb, false);
+}
+
+static int smb347_start_stop_charging(struct smb347_charger *smb)
+{
+	int ret;
+
+	/*
+	 * Depending on whether valid power source is connected or not, we
+	 * disable or enable the charging. We do it manually because it
+	 * depends on how the platform has configured the valid inputs.
+	 */
+	if (smb347_is_ps_online(smb)) {
+		ret = smb347_charging_enable(smb);
+		if (ret < 0)
+			dev_err(smb->dev, "failed to enable charging\n");
+	} else {
+		ret = smb347_charging_disable(smb);
+		if (ret < 0)
+			dev_err(smb->dev, "failed to disable charging\n");
+	}
+
+	return ret;
+}
+
+static int smb347_set_charge_current(struct smb347_charger *smb)
+{
+	unsigned int id = smb->id;
+	int ret;
+
+	if (smb->max_charge_current) {
+		ret = current_to_hw(fcc_tbl[id], ARRAY_SIZE(fcc_tbl[id]),
+				    smb->max_charge_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_FCC_MASK,
+					 ret << CFG_CHARGE_CURRENT_FCC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->pre_charge_current) {
+		ret = current_to_hw(pcc_tbl[id], ARRAY_SIZE(pcc_tbl[id]),
+				    smb->pre_charge_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_PCC_MASK,
+					 ret << CFG_CHARGE_CURRENT_PCC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->termination_current) {
+		ret = current_to_hw(tc_tbl[id], ARRAY_SIZE(tc_tbl[id]),
+				    smb->termination_current);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+					 CFG_CHARGE_CURRENT_TC_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_current_limits(struct smb347_charger *smb)
+{
+	unsigned int id = smb->id;
+	int ret;
+
+	if (smb->mains_current_limit) {
+		ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+				    smb->mains_current_limit);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+					 CFG_CURRENT_LIMIT_DC_MASK,
+					 ret << CFG_CURRENT_LIMIT_DC_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->usb_hc_current_limit) {
+		ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+				    smb->usb_hc_current_limit);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+					 CFG_CURRENT_LIMIT_USB_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_voltage_limits(struct smb347_charger *smb)
+{
+	int ret;
+
+	if (smb->pre_to_fast_voltage) {
+		ret = smb->pre_to_fast_voltage;
+
+		/* uV */
+		ret = clamp_val(ret, 2400000, 3000000) - 2400000;
+		ret /= 200000;
+
+		ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+				CFG_FLOAT_VOLTAGE_THRESHOLD_MASK,
+				ret << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->max_charge_voltage) {
+		ret = smb->max_charge_voltage;
+
+		/* uV */
+		ret = clamp_val(ret, 3500000, 4500000) - 3500000;
+		ret /= 20000;
+
+		ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+					 CFG_FLOAT_VOLTAGE_FLOAT_MASK, ret);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int smb347_set_temp_limits(struct smb347_charger *smb)
+{
+	unsigned int id = smb->id;
+	bool enable_therm_monitor = false;
+	int ret = 0;
+	int val;
+
+	if (smb->chip_temp_threshold) {
+		val = smb->chip_temp_threshold;
+
+		/* degree C */
+		val = clamp_val(val, 100, 130) - 100;
+		val /= 10;
+
+		ret = regmap_update_bits(smb->regmap, CFG_OTG,
+					 CFG_OTG_TEMP_THRESHOLD_MASK,
+					 val << CFG_OTG_TEMP_THRESHOLD_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->soft_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->soft_cold_temp_limit;
+
+		val = clamp_val(val, 0, 15);
+		val /= 5;
+		/* this goes from higher to lower so invert the value */
+		val = ~val & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_SOFT_COLD_MASK,
+					 val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->soft_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->soft_hot_temp_limit;
+
+		val = clamp_val(val, 40, 55) - 40;
+		val /= 5;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_SOFT_HOT_MASK,
+					 val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->hard_cold_temp_limit;
+
+		val = clamp_val(val, -5, 10) + 5;
+		val /= 5;
+		/* this goes from higher to lower so invert the value */
+		val = ~val & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_HARD_COLD_MASK,
+					 val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	if (smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+		val = smb->hard_hot_temp_limit;
+
+		val = clamp_val(val, 50, 65) - 50;
+		val /= 5;
+
+		ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+					 CFG_TEMP_LIMIT_HARD_HOT_MASK,
+					 val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		enable_therm_monitor = true;
+	}
+
+	/*
+	 * If any of the temperature limits are set, we also enable the
+	 * thermistor monitoring.
+	 *
+	 * When soft limits are hit, the device will start to compensate
+	 * current and/or voltage depending on the configuration.
+	 *
+	 * When hard limit is hit, the device will suspend charging
+	 * depending on the configuration.
+	 */
+	if (enable_therm_monitor) {
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+					 CFG_THERM_MONITOR_DISABLED, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->suspend_on_hard_temp_limit) {
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+				 CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->soft_temp_limit_compensation !=
+	    SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT) {
+		val = smb->soft_temp_limit_compensation & 0x3;
+
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+				 CFG_THERM_SOFT_HOT_COMPENSATION_MASK,
+				 val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(smb->regmap, CFG_THERM,
+				 CFG_THERM_SOFT_COLD_COMPENSATION_MASK,
+				 val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (smb->charge_current_compensation) {
+		val = current_to_hw(ccc_tbl[id], ARRAY_SIZE(ccc_tbl[id]),
+				    smb->charge_current_compensation);
+		if (val < 0)
+			return val;
+
+		ret = regmap_update_bits(smb->regmap, CFG_OTG,
+				CFG_OTG_CC_COMPENSATION_MASK,
+				(val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+/*
+ * smb347_set_writable - enables/disables writing to non-volatile registers
+ * @smb: pointer to smb347 charger instance
+ *
+ * You can enable/disable writing to the non-volatile configuration
+ * registers by calling this function.
+ *
+ * Returns %0 on success and negative errno in case of failure.
+ */
+static int smb347_set_writable(struct smb347_charger *smb, bool writable,
+			       bool irq_toggle)
+{
+	struct i2c_client *client = to_i2c_client(smb->dev);
+	int ret;
+
+	if (writable && irq_toggle && !smb->irq_unsupported)
+		disable_irq(client->irq);
+
+	ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_ALLOW_WRITE,
+				 writable ? CMD_A_ALLOW_WRITE : 0);
+
+	if ((!writable || ret) && irq_toggle && !smb->irq_unsupported)
+		enable_irq(client->irq);
+
+	return ret;
+}
+
+static int smb347_hw_init(struct smb347_charger *smb)
+{
+	unsigned int val;
+	int ret;
+
+	ret = smb347_set_writable(smb, true, false);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Program the platform specific configuration values to the device
+	 * first.
+	 */
+	ret = smb347_set_charge_current(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_current_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_voltage_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_set_temp_limits(smb);
+	if (ret < 0)
+		goto fail;
+
+	/* If USB charging is disabled we put the USB in suspend mode */
+	if (!smb->use_usb) {
+		ret = regmap_update_bits(smb->regmap, CMD_A,
+					 CMD_A_SUSPEND_ENABLED,
+					 CMD_A_SUSPEND_ENABLED);
+		if (ret < 0)
+			goto fail;
+	}
+
+	/*
+	 * If configured by platform data, we enable hardware Auto-OTG
+	 * support for driving VBUS. Otherwise we disable it.
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_OTHER, CFG_OTHER_RID_MASK,
+		smb->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
+	if (ret < 0)
+		goto fail;
+
+	/* Activate pin control, making it writable. */
+	switch (smb->enable_control) {
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
+		ret = regmap_set_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL);
+		if (ret < 0)
+			goto fail;
+	}
+
+	/*
+	 * Make the charging functionality controllable by a write to the
+	 * command register unless pin control is specified in the platform
+	 * data.
+	 */
+	switch (smb->enable_control) {
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
+		val = CFG_PIN_EN_CTRL_ACTIVE_LOW;
+		break;
+	case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
+		val = CFG_PIN_EN_CTRL_ACTIVE_HIGH;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL_MASK,
+				 val);
+	if (ret < 0)
+		goto fail;
+
+	/* Disable Automatic Power Source Detection (APSD) interrupt. */
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_APSD_IRQ, 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_update_ps_status(smb);
+	if (ret < 0)
+		goto fail;
+
+	ret = smb347_start_stop_charging(smb);
+
+fail:
+	smb347_set_writable(smb, false, false);
+	return ret;
+}
+
+static irqreturn_t smb347_interrupt(int irq, void *data)
+{
+	struct smb347_charger *smb = data;
+	unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e;
+	bool handled = false;
+	int ret;
+
+	/* SMB347 it needs at least 20ms for setting IRQSTAT_E_*IN_UV_IRQ */
+	usleep_range(25000, 35000);
+
+	ret = regmap_read(smb->regmap, STAT_C, &stat_c);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading STAT_C failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_C, &irqstat_c);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_C failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_D failed\n");
+		return IRQ_NONE;
+	}
+
+	ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_E failed\n");
+		return IRQ_NONE;
+	}
+
+	/*
+	 * If we get charger error we report the error back to user.
+	 * If the error is recovered charging will resume again.
+	 */
+	if (stat_c & STAT_C_CHARGER_ERROR) {
+		dev_err(smb->dev, "charging stopped due to charger error\n");
+		if (smb->use_mains)
+			power_supply_changed(smb->mains);
+		if (smb->use_usb)
+			power_supply_changed(smb->usb);
+		handled = true;
+	}
+
+	/*
+	 * If we reached the termination current the battery is charged and
+	 * we can update the status now. Charging is automatically
+	 * disabled by the hardware.
+	 */
+	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
+		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) {
+			if (smb->use_mains)
+				power_supply_changed(smb->mains);
+			if (smb->use_usb)
+				power_supply_changed(smb->usb);
+		}
+		dev_dbg(smb->dev, "going to HW maintenance mode\n");
+		handled = true;
+	}
+
+	/*
+	 * If we got a charger timeout INT that means the charge
+	 * full is not detected with in charge timeout value.
+	 */
+	if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) {
+		dev_dbg(smb->dev, "total Charge Timeout INT received\n");
+
+		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
+			dev_warn(smb->dev, "charging stopped due to timeout\n");
+		if (smb->use_mains)
+			power_supply_changed(smb->mains);
+		if (smb->use_usb)
+			power_supply_changed(smb->usb);
+		handled = true;
+	}
+
+	/*
+	 * If we got an under voltage interrupt it means that AC/USB input
+	 * was connected or disconnected.
+	 */
+	if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) {
+		if (smb347_update_ps_status(smb) > 0) {
+			smb347_start_stop_charging(smb);
+			if (smb->use_mains)
+				power_supply_changed(smb->mains);
+			if (smb->use_usb)
+				power_supply_changed(smb->usb);
+		}
+		handled = true;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int smb347_irq_set(struct smb347_charger *smb, bool enable)
+{
+	int ret;
+
+	if (smb->irq_unsupported)
+		return 0;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Enable/disable interrupts for:
+	 *	- under voltage
+	 *	- termination current reached
+	 *	- charger timeout
+	 *	- charger error
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff,
+				 enable ? CFG_FAULT_IRQ_DCIN_UV : 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff,
+			enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER |
+					CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0);
+	if (ret < 0)
+		goto fail;
+
+	ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CHARGER_ERROR,
+				 enable ? CFG_PIN_EN_CHARGER_ERROR : 0);
+fail:
+	smb347_set_writable(smb, false, true);
+	return ret;
+}
+
+static inline int smb347_irq_enable(struct smb347_charger *smb)
+{
+	return smb347_irq_set(smb, true);
+}
+
+static inline int smb347_irq_disable(struct smb347_charger *smb)
+{
+	return smb347_irq_set(smb, false);
+}
+
+static int smb347_irq_init(struct smb347_charger *smb,
+			   struct i2c_client *client)
+{
+	int ret;
+
+	smb->irq_unsupported = true;
+
+	/*
+	 * Interrupt pin is optional. If it is connected, we setup the
+	 * interrupt support here.
+	 */
+	if (!client->irq)
+		return 0;
+
+	ret = smb347_set_writable(smb, true, false);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Configure the STAT output to be suitable for interrupts: disable
+	 * all other output (except interrupts) and make it active low.
+	 */
+	ret = regmap_update_bits(smb->regmap, CFG_STAT,
+				 CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
+				 CFG_STAT_DISABLED);
+
+	smb347_set_writable(smb, false, false);
+
+	if (ret < 0) {
+		dev_warn(smb->dev, "failed to initialize IRQ: %d\n", ret);
+		dev_warn(smb->dev, "disabling IRQ support\n");
+		return 0;
+	}
+
+	ret = devm_request_threaded_irq(smb->dev, client->irq, NULL,
+					smb347_interrupt, IRQF_ONESHOT,
+					client->name, smb);
+	if (ret)
+		return ret;
+
+	smb->irq_unsupported = false;
+
+	ret = smb347_irq_enable(smb);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Returns the constant charge current programmed
+ * into the charger in uA.
+ */
+static int get_const_charge_current(struct smb347_charger *smb)
+{
+	unsigned int id = smb->id;
+	int ret, intval;
+	unsigned int v;
+
+	if (!smb347_is_ps_online(smb))
+		return -ENODATA;
+
+	ret = regmap_read(smb->regmap, STAT_B, &v);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The current value is composition of FCC and PCC values
+	 * and we can detect which table to use from bit 5.
+	 */
+	if (v & 0x20) {
+		intval = hw_to_current(fcc_tbl[id],
+				       ARRAY_SIZE(fcc_tbl[id]), v & 7);
+	} else {
+		v >>= 3;
+		intval = hw_to_current(pcc_tbl[id],
+				       ARRAY_SIZE(pcc_tbl[id]), v & 7);
+	}
+
+	return intval;
+}
+
+/*
+ * Returns the constant charge voltage programmed
+ * into the charger in uV.
+ */
+static int get_const_charge_voltage(struct smb347_charger *smb)
+{
+	int ret, intval;
+	unsigned int v;
+
+	if (!smb347_is_ps_online(smb))
+		return -ENODATA;
+
+	ret = regmap_read(smb->regmap, STAT_A, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= STAT_A_FLOAT_VOLTAGE_MASK;
+	if (v > 0x3d)
+		v = 0x3d;
+
+	intval = 3500000 + v * 20000;
+
+	return intval;
+}
+
+static int smb347_get_charging_status(struct smb347_charger *smb,
+				      struct power_supply *psy)
+{
+	int ret, status;
+	unsigned int val;
+
+	if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+		if (!smb->usb_online)
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+	} else {
+		if (!smb->mains_online)
+			return POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & STAT_C_CHARGER_ERROR) ||
+			(val & STAT_C_HOLDOFF_STAT)) {
+		/*
+		 * set to NOT CHARGING upon charger error
+		 * or charging has stopped.
+		 */
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) {
+			/*
+			 * set to charging if battery is in pre-charge,
+			 * fast charge or taper charging mode.
+			 */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		} else if (val & STAT_C_CHG_TERM) {
+			/*
+			 * set the status to FULL if battery is not in pre
+			 * charge, fast charge or taper charging mode AND
+			 * charging is terminated at least once.
+			 */
+			status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			/*
+			 * in this case no charger error or termination
+			 * occured but charging is not in progress!!!
+			 */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+	}
+
+	return status;
+}
+
+static int smb347_get_property_locked(struct power_supply *psy,
+				      enum power_supply_property prop,
+				      union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = smb347_get_charging_status(smb, psy);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+			if (!smb->usb_online)
+				return -ENODATA;
+		} else {
+			if (!smb->mains_online)
+				return -ENODATA;
+		}
+
+		/*
+		 * We handle trickle and pre-charging the same, and taper
+		 * and none the same.
+		 */
+		switch (smb347_charging_status(smb)) {
+		case 1:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+			break;
+		case 2:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+			break;
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+			val->intval = smb->usb_online;
+		else
+			val->intval = smb->mains_online;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = get_const_charge_voltage(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = get_const_charge_current(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int smb347_get_property(struct power_supply *psy,
+			       enum power_supply_property prop,
+			       union power_supply_propval *val)
+{
+	struct smb347_charger *smb = power_supply_get_drvdata(psy);
+	struct i2c_client *client = to_i2c_client(smb->dev);
+	int ret;
+
+	if (!smb->irq_unsupported)
+		disable_irq(client->irq);
+
+	ret = smb347_get_property_locked(psy, prop, val);
+
+	if (!smb->irq_unsupported)
+		enable_irq(client->irq);
+
+	return ret;
+}
+
+static enum power_supply_property smb347_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case IRQSTAT_A:
+	case IRQSTAT_C:
+	case IRQSTAT_D:
+	case IRQSTAT_E:
+	case IRQSTAT_F:
+	case STAT_A:
+	case STAT_B:
+	case STAT_C:
+	case STAT_E:
+		return true;
+	}
+
+	return false;
+}
+
+static bool smb347_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CFG_CHARGE_CURRENT:
+	case CFG_CURRENT_LIMIT:
+	case CFG_FLOAT_VOLTAGE:
+	case CFG_STAT:
+	case CFG_PIN:
+	case CFG_THERM:
+	case CFG_SYSOK:
+	case CFG_OTHER:
+	case CFG_OTG:
+	case CFG_TEMP_LIMIT:
+	case CFG_FAULT_IRQ:
+	case CFG_STATUS_IRQ:
+	case CFG_ADDRESS:
+	case CMD_A:
+	case CMD_B:
+	case CMD_C:
+		return true;
+	}
+
+	return smb347_volatile_reg(dev, reg);
+}
+
+static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
+{
+	struct device *dev = smb->dev;
+
+	smb->soft_temp_limit_compensation =
+					SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT;
+	/*
+	 * These properties come from the battery info, still we need to
+	 * pre-initialize the values. See smb347_get_battery_info() below.
+	 */
+	smb->soft_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+	smb->hard_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+	smb->soft_hot_temp_limit  = SMB3XX_TEMP_USE_DEFAULT;
+	smb->hard_hot_temp_limit  = SMB3XX_TEMP_USE_DEFAULT;
+
+	/* Charging constraints */
+	device_property_read_u32(dev, "summit,fast-voltage-threshold-microvolt",
+				 &smb->pre_to_fast_voltage);
+	device_property_read_u32(dev, "summit,mains-current-limit-microamp",
+				 &smb->mains_current_limit);
+	device_property_read_u32(dev, "summit,usb-current-limit-microamp",
+				 &smb->usb_hc_current_limit);
+
+	/* For thermometer monitoring */
+	device_property_read_u32(dev, "summit,chip-temperature-threshold-celsius",
+				 &smb->chip_temp_threshold);
+	device_property_read_u32(dev, "summit,soft-compensation-method",
+				 &smb->soft_temp_limit_compensation);
+	device_property_read_u32(dev, "summit,charge-current-compensation-microamp",
+				 &smb->charge_current_compensation);
+
+	/* Supported charging mode */
+	smb->use_mains = device_property_read_bool(dev, "summit,enable-mains-charging");
+	smb->use_usb = device_property_read_bool(dev, "summit,enable-usb-charging");
+	smb->use_usb_otg = device_property_read_bool(dev, "summit,enable-otg-charging");
+
+	/* Select charging control */
+	device_property_read_u32(dev, "summit,enable-charge-control",
+				 &smb->enable_control);
+
+	/*
+	 * Polarity of INOK signal indicating presence of external power
+	 * supply connected to the charger.
+	 */
+	device_property_read_u32(dev, "summit,inok-polarity",
+				 &smb->inok_polarity);
+}
+
+static int smb347_get_battery_info(struct smb347_charger *smb)
+{
+	struct power_supply_battery_info *info;
+	struct power_supply *supply;
+	int err;
+
+	if (smb->mains)
+		supply = smb->mains;
+	else
+		supply = smb->usb;
+
+	err = power_supply_get_battery_info(supply, &info);
+	if (err == -ENXIO || err == -ENODEV)
+		return 0;
+	if (err)
+		return err;
+
+	if (info->constant_charge_current_max_ua != -EINVAL)
+		smb->max_charge_current = info->constant_charge_current_max_ua;
+
+	if (info->constant_charge_voltage_max_uv != -EINVAL)
+		smb->max_charge_voltage = info->constant_charge_voltage_max_uv;
+
+	if (info->precharge_current_ua != -EINVAL)
+		smb->pre_charge_current = info->precharge_current_ua;
+
+	if (info->charge_term_current_ua != -EINVAL)
+		smb->termination_current = info->charge_term_current_ua;
+
+	if (info->temp_alert_min != INT_MIN)
+		smb->soft_cold_temp_limit = info->temp_alert_min;
+
+	if (info->temp_alert_max != INT_MAX)
+		smb->soft_hot_temp_limit = info->temp_alert_max;
+
+	if (info->temp_min != INT_MIN)
+		smb->hard_cold_temp_limit = info->temp_min;
+
+	if (info->temp_max != INT_MAX)
+		smb->hard_hot_temp_limit = info->temp_max;
+
+	/* Suspend when battery temperature is outside hard limits */
+	if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT ||
+	    smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT)
+		smb->suspend_on_hard_temp_limit = true;
+
+	return 0;
+}
+
+static int smb347_usb_vbus_get_current_limit(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(smb->regmap, CFG_OTG, &val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * It's unknown what happens if this bit is unset due to lack of
+	 * access to the datasheet, assume it's limit-enable.
+	 */
+	if (!(val & CFG_OTG_CURRENT_LIMIT_250mA))
+		return 0;
+
+	return val & CFG_OTG_CURRENT_LIMIT_750mA ? 750000 : 250000;
+}
+
+static int smb347_usb_vbus_set_new_current_limit(struct smb347_charger *smb,
+						 int max_uA)
+{
+	const unsigned int mask = CFG_OTG_CURRENT_LIMIT_750mA |
+				  CFG_OTG_CURRENT_LIMIT_250mA;
+	unsigned int val = CFG_OTG_CURRENT_LIMIT_250mA;
+	int ret;
+
+	if (max_uA >= 750000)
+		val |= CFG_OTG_CURRENT_LIMIT_750mA;
+
+	ret = regmap_update_bits(smb->regmap, CFG_OTG, mask, val);
+	if (ret < 0)
+		dev_err(smb->dev, "failed to change USB current limit\n");
+
+	return ret;
+}
+
+static int smb347_usb_vbus_set_current_limit(struct regulator_dev *rdev,
+					     int min_uA, int max_uA)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
+static int smb347_usb_vbus_regulator_enable(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret, max_uA;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	smb347_charging_disable(smb);
+
+	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
+		unsigned int sysok = 0;
+
+		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_LOW)
+			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
+
+		/*
+		 * VBUS won't be powered if INOK is active, so we need to
+		 * manually disable INOK on some platforms.
+		 */
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
+		if (ret < 0) {
+			dev_err(smb->dev, "failed to disable INOK\n");
+			goto done;
+		}
+	}
+
+	ret = smb347_usb_vbus_get_current_limit(rdev);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to get USB VBUS current limit\n");
+		goto done;
+	}
+
+	max_uA = ret;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, 250000);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to preset USB VBUS current limit\n");
+		goto done;
+	}
+
+	ret = regmap_set_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to enable USB VBUS\n");
+		goto done;
+	}
+
+	smb->usb_vbus_enabled = true;
+
+	ret = smb347_usb_vbus_set_new_current_limit(smb, max_uA);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to restore USB VBUS current limit\n");
+		goto done;
+	}
+done:
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
+static int smb347_usb_vbus_regulator_disable(struct regulator_dev *rdev)
+{
+	struct smb347_charger *smb = rdev_get_drvdata(rdev);
+	int ret;
+
+	ret = smb347_set_writable(smb, true, true);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_clear_bits(smb->regmap, CMD_A, CMD_A_OTG_ENABLED);
+	if (ret < 0) {
+		dev_err(smb->dev, "failed to disable USB VBUS\n");
+		goto done;
+	}
+
+	smb->usb_vbus_enabled = false;
+
+	if (device_property_read_bool(&rdev->dev, "summit,needs-inok-toggle")) {
+		unsigned int sysok = 0;
+
+		if (smb->inok_polarity == SMB3XX_SYSOK_INOK_ACTIVE_HIGH)
+			sysok = CFG_SYSOK_INOK_ACTIVE_HIGH;
+
+		ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+					 CFG_SYSOK_INOK_ACTIVE_HIGH, sysok);
+		if (ret < 0) {
+			dev_err(smb->dev, "failed to enable INOK\n");
+			goto done;
+		}
+	}
+
+	smb347_start_stop_charging(smb);
+done:
+	smb347_set_writable(smb, false, true);
+
+	return ret;
+}
+
+static const struct regmap_config smb347_regmap = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= SMB347_MAX_REGISTER,
+	.volatile_reg	= smb347_volatile_reg,
+	.readable_reg	= smb347_readable_reg,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static const struct regulator_ops smb347_usb_vbus_regulator_ops = {
+	.is_enabled	= regulator_is_enabled_regmap,
+	.enable		= smb347_usb_vbus_regulator_enable,
+	.disable	= smb347_usb_vbus_regulator_disable,
+	.get_current_limit = smb347_usb_vbus_get_current_limit,
+	.set_current_limit = smb347_usb_vbus_set_current_limit,
+};
+
+static const struct power_supply_desc smb347_mains_desc = {
+	.name		= "smb347-mains",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.get_property	= smb347_get_property,
+	.properties	= smb347_properties,
+	.num_properties	= ARRAY_SIZE(smb347_properties),
+};
+
+static const struct power_supply_desc smb347_usb_desc = {
+	.name		= "smb347-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.get_property	= smb347_get_property,
+	.properties	= smb347_properties,
+	.num_properties	= ARRAY_SIZE(smb347_properties),
+};
+
+static const struct regulator_desc smb347_usb_vbus_regulator_desc = {
+	.name		= "smb347-usb-vbus",
+	.of_match	= of_match_ptr("usb-vbus"),
+	.ops		= &smb347_usb_vbus_regulator_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_reg	= CMD_A,
+	.enable_mask	= CMD_A_OTG_ENABLED,
+	.enable_val	= CMD_A_OTG_ENABLED,
+	.fixed_uV	= 5000000,
+	.n_voltages	= 1,
+};
+
+static int smb347_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct power_supply_config mains_usb_cfg = {};
+	struct regulator_config usb_rdev_cfg = {};
+	struct device *dev = &client->dev;
+	struct smb347_charger *smb;
+	int ret;
+
+	smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
+	if (!smb)
+		return -ENOMEM;
+	smb->dev = &client->dev;
+	smb->id = id->driver_data;
+	i2c_set_clientdata(client, smb);
+
+	smb347_dt_parse_dev_info(smb);
+	if (!smb->use_mains && !smb->use_usb)
+		return -EINVAL;
+
+	smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
+	if (IS_ERR(smb->regmap))
+		return PTR_ERR(smb->regmap);
+
+	mains_usb_cfg.drv_data = smb;
+	mains_usb_cfg.of_node = dev->of_node;
+	if (smb->use_mains) {
+		smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
+							&mains_usb_cfg);
+		if (IS_ERR(smb->mains))
+			return PTR_ERR(smb->mains);
+	}
+
+	if (smb->use_usb) {
+		smb->usb = devm_power_supply_register(dev, &smb347_usb_desc,
+						      &mains_usb_cfg);
+		if (IS_ERR(smb->usb))
+			return PTR_ERR(smb->usb);
+	}
+
+	ret = smb347_get_battery_info(smb);
+	if (ret)
+		return ret;
+
+	ret = smb347_hw_init(smb);
+	if (ret < 0)
+		return ret;
+
+	ret = smb347_irq_init(smb, client);
+	if (ret)
+		return ret;
+
+	usb_rdev_cfg.dev = dev;
+	usb_rdev_cfg.driver_data = smb;
+	usb_rdev_cfg.regmap = smb->regmap;
+
+	smb->usb_rdev = devm_regulator_register(dev,
+						&smb347_usb_vbus_regulator_desc,
+						&usb_rdev_cfg);
+	if (IS_ERR(smb->usb_rdev)) {
+		smb347_irq_disable(smb);
+		return PTR_ERR(smb->usb_rdev);
+	}
+
+	return 0;
+}
+
+static void smb347_remove(struct i2c_client *client)
+{
+	struct smb347_charger *smb = i2c_get_clientdata(client);
+
+	smb347_usb_vbus_regulator_disable(smb->usb_rdev);
+	smb347_irq_disable(smb);
+}
+
+static void smb347_shutdown(struct i2c_client *client)
+{
+	smb347_remove(client);
+}
+
+static const struct i2c_device_id smb347_id[] = {
+	{ "smb345", SMB345 },
+	{ "smb347", SMB347 },
+	{ "smb358", SMB358 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, smb347_id);
+
+static const struct of_device_id smb3xx_of_match[] = {
+	{ .compatible = "summit,smb345" },
+	{ .compatible = "summit,smb347" },
+	{ .compatible = "summit,smb358" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, smb3xx_of_match);
+
+static struct i2c_driver smb347_driver = {
+	.driver = {
+		.name = "smb347",
+		.of_match_table = smb3xx_of_match,
+	},
+	.probe = smb347_probe,
+	.remove = smb347_remove,
+	.shutdown = smb347_shutdown,
+	.id_table = smb347_id,
+};
+module_i2c_driver(smb347_driver);
+
+MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_DESCRIPTION("SMB347 battery charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c
new file mode 100644
index 000000000..540707882
--- /dev/null
+++ b/drivers/power/supply/surface_battery.c
@@ -0,0 +1,875 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Battery driver for 7th-generation Microsoft Surface devices via Surface
+ * System Aggregator Module (SSAM).
+ *
+ * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SAM interface. -------------------------------------------------------- */
+
+enum sam_event_cid_bat {
+	SAM_EVENT_CID_BAT_BIX         = 0x15,
+	SAM_EVENT_CID_BAT_BST         = 0x16,
+	SAM_EVENT_CID_BAT_ADP         = 0x17,
+	SAM_EVENT_CID_BAT_PROT        = 0x18,
+	SAM_EVENT_CID_BAT_DPTF        = 0x53,
+};
+
+enum sam_battery_sta {
+	SAM_BATTERY_STA_OK            = 0x0f,
+	SAM_BATTERY_STA_PRESENT	      = 0x10,
+};
+
+enum sam_battery_state {
+	SAM_BATTERY_STATE_DISCHARGING = BIT(0),
+	SAM_BATTERY_STATE_CHARGING    = BIT(1),
+	SAM_BATTERY_STATE_CRITICAL    = BIT(2),
+};
+
+enum sam_battery_power_unit {
+	SAM_BATTERY_POWER_UNIT_mW     = 0,
+	SAM_BATTERY_POWER_UNIT_mA     = 1,
+};
+
+/* Equivalent to data returned in ACPI _BIX method, revision 0. */
+struct spwr_bix {
+	u8  revision;
+	__le32 power_unit;
+	__le32 design_cap;
+	__le32 last_full_charge_cap;
+	__le32 technology;
+	__le32 design_voltage;
+	__le32 design_cap_warn;
+	__le32 design_cap_low;
+	__le32 cycle_count;
+	__le32 measurement_accuracy;
+	__le32 max_sampling_time;
+	__le32 min_sampling_time;
+	__le32 max_avg_interval;
+	__le32 min_avg_interval;
+	__le32 bat_cap_granularity_1;
+	__le32 bat_cap_granularity_2;
+	__u8 model[21];
+	__u8 serial[11];
+	__u8 type[5];
+	__u8 oem_info[21];
+} __packed;
+
+static_assert(sizeof(struct spwr_bix) == 119);
+
+/* Equivalent to data returned in ACPI _BST method. */
+struct spwr_bst {
+	__le32 state;
+	__le32 present_rate;
+	__le32 remaining_cap;
+	__le32 present_voltage;
+} __packed;
+
+static_assert(sizeof(struct spwr_bst) == 16);
+
+#define SPWR_BIX_REVISION		0
+#define SPWR_BATTERY_VALUE_UNKNOWN	0xffffffff
+
+/* Get battery status (_STA) */
+SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_sta, __le32, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x01,
+});
+
+/* Get battery static information (_BIX). */
+SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_bix, struct spwr_bix, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x02,
+});
+
+/* Get battery dynamic information (_BST). */
+SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_bst, struct spwr_bst, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x03,
+});
+
+/* Set battery trip point (_BTP). */
+SSAM_DEFINE_SYNC_REQUEST_CL_W(ssam_bat_set_btp, __le32, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x04,
+});
+
+
+/* -- Device structures. ---------------------------------------------------- */
+
+struct spwr_psy_properties {
+	const char *name;
+	struct ssam_event_registry registry;
+};
+
+struct spwr_battery_device {
+	struct ssam_device *sdev;
+
+	char name[32];
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+
+	struct delayed_work update_work;
+
+	struct ssam_event_notifier notif;
+
+	struct mutex lock;  /* Guards access to state data below. */
+	unsigned long timestamp;
+
+	__le32 sta;
+	struct spwr_bix bix;
+	struct spwr_bst bst;
+	u32 alarm;
+};
+
+
+/* -- Module parameters. ---------------------------------------------------- */
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "battery state caching time in milliseconds [default: 1000]");
+
+
+/* -- State management. ----------------------------------------------------- */
+
+/*
+ * Delay for battery update quirk. See spwr_external_power_changed() below
+ * for more details.
+ */
+#define SPWR_AC_BAT_UPDATE_DELAY	msecs_to_jiffies(5000)
+
+static bool spwr_battery_present(struct spwr_battery_device *bat)
+{
+	lockdep_assert_held(&bat->lock);
+
+	return le32_to_cpu(bat->sta) & SAM_BATTERY_STA_PRESENT;
+}
+
+static int spwr_battery_load_sta(struct spwr_battery_device *bat)
+{
+	lockdep_assert_held(&bat->lock);
+
+	return ssam_retry(ssam_bat_get_sta, bat->sdev, &bat->sta);
+}
+
+static int spwr_battery_load_bix(struct spwr_battery_device *bat)
+{
+	int status;
+
+	lockdep_assert_held(&bat->lock);
+
+	if (!spwr_battery_present(bat))
+		return 0;
+
+	status = ssam_retry(ssam_bat_get_bix, bat->sdev, &bat->bix);
+
+	/* Enforce NULL terminated strings in case anything goes wrong... */
+	bat->bix.model[ARRAY_SIZE(bat->bix.model) - 1] = 0;
+	bat->bix.serial[ARRAY_SIZE(bat->bix.serial) - 1] = 0;
+	bat->bix.type[ARRAY_SIZE(bat->bix.type) - 1] = 0;
+	bat->bix.oem_info[ARRAY_SIZE(bat->bix.oem_info) - 1] = 0;
+
+	return status;
+}
+
+static int spwr_battery_load_bst(struct spwr_battery_device *bat)
+{
+	lockdep_assert_held(&bat->lock);
+
+	if (!spwr_battery_present(bat))
+		return 0;
+
+	return ssam_retry(ssam_bat_get_bst, bat->sdev, &bat->bst);
+}
+
+static int spwr_battery_set_alarm_unlocked(struct spwr_battery_device *bat, u32 value)
+{
+	__le32 value_le = cpu_to_le32(value);
+
+	lockdep_assert_held(&bat->lock);
+
+	bat->alarm = value;
+	return ssam_retry(ssam_bat_set_btp, bat->sdev, &value_le);
+}
+
+static int spwr_battery_update_bst_unlocked(struct spwr_battery_device *bat, bool cached)
+{
+	unsigned long cache_deadline = bat->timestamp + msecs_to_jiffies(cache_time);
+	int status;
+
+	lockdep_assert_held(&bat->lock);
+
+	if (cached && bat->timestamp && time_is_after_jiffies(cache_deadline))
+		return 0;
+
+	status = spwr_battery_load_sta(bat);
+	if (status)
+		return status;
+
+	status = spwr_battery_load_bst(bat);
+	if (status)
+		return status;
+
+	bat->timestamp = jiffies;
+	return 0;
+}
+
+static int spwr_battery_update_bst(struct spwr_battery_device *bat, bool cached)
+{
+	int status;
+
+	mutex_lock(&bat->lock);
+	status = spwr_battery_update_bst_unlocked(bat, cached);
+	mutex_unlock(&bat->lock);
+
+	return status;
+}
+
+static int spwr_battery_update_bix_unlocked(struct spwr_battery_device *bat)
+{
+	int status;
+
+	lockdep_assert_held(&bat->lock);
+
+	status = spwr_battery_load_sta(bat);
+	if (status)
+		return status;
+
+	status = spwr_battery_load_bix(bat);
+	if (status)
+		return status;
+
+	status = spwr_battery_load_bst(bat);
+	if (status)
+		return status;
+
+	if (bat->bix.revision != SPWR_BIX_REVISION)
+		dev_warn(&bat->sdev->dev, "unsupported battery revision: %u\n", bat->bix.revision);
+
+	bat->timestamp = jiffies;
+	return 0;
+}
+
+static u32 sprw_battery_get_full_cap_safe(struct spwr_battery_device *bat)
+{
+	u32 full_cap = get_unaligned_le32(&bat->bix.last_full_charge_cap);
+
+	lockdep_assert_held(&bat->lock);
+
+	if (full_cap == 0 || full_cap == SPWR_BATTERY_VALUE_UNKNOWN)
+		full_cap = get_unaligned_le32(&bat->bix.design_cap);
+
+	return full_cap;
+}
+
+static bool spwr_battery_is_full(struct spwr_battery_device *bat)
+{
+	u32 state = get_unaligned_le32(&bat->bst.state);
+	u32 full_cap = sprw_battery_get_full_cap_safe(bat);
+	u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap);
+
+	lockdep_assert_held(&bat->lock);
+
+	return full_cap != SPWR_BATTERY_VALUE_UNKNOWN && full_cap != 0 &&
+		remaining_cap != SPWR_BATTERY_VALUE_UNKNOWN &&
+		remaining_cap >= full_cap &&
+		state == 0;
+}
+
+static int spwr_battery_recheck_full(struct spwr_battery_device *bat)
+{
+	bool present;
+	u32 unit;
+	int status;
+
+	mutex_lock(&bat->lock);
+	unit = get_unaligned_le32(&bat->bix.power_unit);
+	present = spwr_battery_present(bat);
+
+	status = spwr_battery_update_bix_unlocked(bat);
+	if (status)
+		goto out;
+
+	/* If battery has been attached, (re-)initialize alarm. */
+	if (!present && spwr_battery_present(bat)) {
+		u32 cap_warn = get_unaligned_le32(&bat->bix.design_cap_warn);
+
+		status = spwr_battery_set_alarm_unlocked(bat, cap_warn);
+		if (status)
+			goto out;
+	}
+
+	/*
+	 * Warn if the unit has changed. This is something we genuinely don't
+	 * expect to happen, so make this a big warning. If it does, we'll
+	 * need to add support for it.
+	 */
+	WARN_ON(unit != get_unaligned_le32(&bat->bix.power_unit));
+
+out:
+	mutex_unlock(&bat->lock);
+
+	if (!status)
+		power_supply_changed(bat->psy);
+
+	return status;
+}
+
+static int spwr_battery_recheck_status(struct spwr_battery_device *bat)
+{
+	int status;
+
+	status = spwr_battery_update_bst(bat, false);
+	if (!status)
+		power_supply_changed(bat->psy);
+
+	return status;
+}
+
+static u32 spwr_notify_bat(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct spwr_battery_device *bat = container_of(nf, struct spwr_battery_device, notif);
+	int status;
+
+	/*
+	 * We cannot use strict matching when registering the notifier as the
+	 * EC expects us to register it against instance ID 0. Strict matching
+	 * would thus drop events, as those may have non-zero instance IDs in
+	 * this subsystem. So we need to check the instance ID of the event
+	 * here manually.
+	 */
+	if (event->instance_id != bat->sdev->uid.instance)
+		return 0;
+
+	dev_dbg(&bat->sdev->dev, "power event (cid = %#04x, iid = %#04x, tid = %#04x)\n",
+		event->command_id, event->instance_id, event->target_id);
+
+	switch (event->command_id) {
+	case SAM_EVENT_CID_BAT_BIX:
+		status = spwr_battery_recheck_full(bat);
+		break;
+
+	case SAM_EVENT_CID_BAT_BST:
+		status = spwr_battery_recheck_status(bat);
+		break;
+
+	case SAM_EVENT_CID_BAT_PROT:
+		/*
+		 * TODO: Implement support for battery protection status change
+		 *       event.
+		 */
+		status = 0;
+		break;
+
+	case SAM_EVENT_CID_BAT_DPTF:
+		/*
+		 * TODO: Implement support for DPTF event.
+		 */
+		status = 0;
+		break;
+
+	default:
+		return 0;
+	}
+
+	return ssam_notifier_from_errno(status) | SSAM_NOTIF_HANDLED;
+}
+
+static void spwr_battery_update_bst_workfn(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct spwr_battery_device *bat;
+	int status;
+
+	bat = container_of(dwork, struct spwr_battery_device, update_work);
+
+	status = spwr_battery_update_bst(bat, false);
+	if (status) {
+		dev_err(&bat->sdev->dev, "failed to update battery state: %d\n", status);
+		return;
+	}
+
+	power_supply_changed(bat->psy);
+}
+
+static void spwr_external_power_changed(struct power_supply *psy)
+{
+	struct spwr_battery_device *bat = power_supply_get_drvdata(psy);
+
+	/*
+	 * Handle battery update quirk: When the battery is fully charged (or
+	 * charged up to the limit imposed by the UEFI battery limit) and the
+	 * adapter is plugged in or removed, the EC does not send a separate
+	 * event for the state (charging/discharging) change. Furthermore it
+	 * may take some time until the state is updated on the battery.
+	 * Schedule an update to solve this.
+	 */
+
+	schedule_delayed_work(&bat->update_work, SPWR_AC_BAT_UPDATE_DELAY);
+}
+
+
+/* -- Properties. ----------------------------------------------------------- */
+
+static const enum power_supply_property spwr_battery_props_chg[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static const enum power_supply_property spwr_battery_props_eng[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_POWER_NOW,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int spwr_battery_prop_status(struct spwr_battery_device *bat)
+{
+	u32 state = get_unaligned_le32(&bat->bst.state);
+	u32 present_rate = get_unaligned_le32(&bat->bst.present_rate);
+
+	lockdep_assert_held(&bat->lock);
+
+	if (state & SAM_BATTERY_STATE_DISCHARGING)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (state & SAM_BATTERY_STATE_CHARGING)
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	if (spwr_battery_is_full(bat))
+		return POWER_SUPPLY_STATUS_FULL;
+
+	if (present_rate == 0)
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+	return POWER_SUPPLY_STATUS_UNKNOWN;
+}
+
+static int spwr_battery_prop_technology(struct spwr_battery_device *bat)
+{
+	lockdep_assert_held(&bat->lock);
+
+	if (!strcasecmp("NiCd", bat->bix.type))
+		return POWER_SUPPLY_TECHNOLOGY_NiCd;
+
+	if (!strcasecmp("NiMH", bat->bix.type))
+		return POWER_SUPPLY_TECHNOLOGY_NiMH;
+
+	if (!strcasecmp("LION", bat->bix.type))
+		return POWER_SUPPLY_TECHNOLOGY_LION;
+
+	if (!strncasecmp("LI-ION", bat->bix.type, 6))
+		return POWER_SUPPLY_TECHNOLOGY_LION;
+
+	if (!strcasecmp("LiP", bat->bix.type))
+		return POWER_SUPPLY_TECHNOLOGY_LIPO;
+
+	return POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+}
+
+static int spwr_battery_prop_capacity(struct spwr_battery_device *bat)
+{
+	u32 full_cap = sprw_battery_get_full_cap_safe(bat);
+	u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap);
+
+	lockdep_assert_held(&bat->lock);
+
+	if (full_cap == 0 || full_cap == SPWR_BATTERY_VALUE_UNKNOWN)
+		return -ENODATA;
+
+	if (remaining_cap == SPWR_BATTERY_VALUE_UNKNOWN)
+		return -ENODATA;
+
+	return remaining_cap * 100 / full_cap;
+}
+
+static int spwr_battery_prop_capacity_level(struct spwr_battery_device *bat)
+{
+	u32 state = get_unaligned_le32(&bat->bst.state);
+	u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap);
+
+	lockdep_assert_held(&bat->lock);
+
+	if (state & SAM_BATTERY_STATE_CRITICAL)
+		return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+
+	if (spwr_battery_is_full(bat))
+		return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+
+	if (remaining_cap <= bat->alarm)
+		return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+
+	return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+}
+
+static int spwr_battery_get_property(struct power_supply *psy, enum power_supply_property psp,
+				     union power_supply_propval *val)
+{
+	struct spwr_battery_device *bat = power_supply_get_drvdata(psy);
+	u32 value;
+	int status;
+
+	mutex_lock(&bat->lock);
+
+	status = spwr_battery_update_bst_unlocked(bat, true);
+	if (status)
+		goto out;
+
+	/* Abort if battery is not present. */
+	if (!spwr_battery_present(bat) && psp != POWER_SUPPLY_PROP_PRESENT) {
+		status = -ENODEV;
+		goto out;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = spwr_battery_prop_status(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = spwr_battery_present(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = spwr_battery_prop_technology(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+		value = get_unaligned_le32(&bat->bix.cycle_count);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		value = get_unaligned_le32(&bat->bix.design_voltage);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		value = get_unaligned_le32(&bat->bst.present_voltage);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_POWER_NOW:
+		value = get_unaligned_le32(&bat->bst.present_rate);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		value = get_unaligned_le32(&bat->bix.design_cap);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		value = get_unaligned_le32(&bat->bix.last_full_charge_cap);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+		value = get_unaligned_le32(&bat->bst.remaining_cap);
+		if (value != SPWR_BATTERY_VALUE_UNKNOWN)
+			val->intval = value * 1000;
+		else
+			status = -ENODATA;
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = spwr_battery_prop_capacity(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		val->intval = spwr_battery_prop_capacity_level(bat);
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bat->bix.model;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = bat->bix.oem_info;
+		break;
+
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		val->strval = bat->bix.serial;
+		break;
+
+	default:
+		status = -EINVAL;
+		break;
+	}
+
+out:
+	mutex_unlock(&bat->lock);
+	return status;
+}
+
+
+/* -- Alarm attribute. ------------------------------------------------------ */
+
+static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct spwr_battery_device *bat = power_supply_get_drvdata(psy);
+	int status;
+
+	mutex_lock(&bat->lock);
+	status = sysfs_emit(buf, "%d\n", bat->alarm * 1000);
+	mutex_unlock(&bat->lock);
+
+	return status;
+}
+
+static ssize_t alarm_store(struct device *dev, struct device_attribute *attr, const char *buf,
+			   size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct spwr_battery_device *bat = power_supply_get_drvdata(psy);
+	unsigned long value;
+	int status;
+
+	status = kstrtoul(buf, 0, &value);
+	if (status)
+		return status;
+
+	mutex_lock(&bat->lock);
+
+	if (!spwr_battery_present(bat)) {
+		mutex_unlock(&bat->lock);
+		return -ENODEV;
+	}
+
+	status = spwr_battery_set_alarm_unlocked(bat, value / 1000);
+	if (status) {
+		mutex_unlock(&bat->lock);
+		return status;
+	}
+
+	mutex_unlock(&bat->lock);
+	return count;
+}
+
+static DEVICE_ATTR_RW(alarm);
+
+static struct attribute *spwr_battery_attrs[] = {
+	&dev_attr_alarm.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(spwr_battery);
+
+
+/* -- Device setup. --------------------------------------------------------- */
+
+static void spwr_battery_init(struct spwr_battery_device *bat, struct ssam_device *sdev,
+			      struct ssam_event_registry registry, const char *name)
+{
+	mutex_init(&bat->lock);
+	strncpy(bat->name, name, ARRAY_SIZE(bat->name) - 1);
+
+	bat->sdev = sdev;
+
+	bat->notif.base.priority = 1;
+	bat->notif.base.fn = spwr_notify_bat;
+	bat->notif.event.reg = registry;
+	bat->notif.event.id.target_category = sdev->uid.category;
+	bat->notif.event.id.instance = 0;	/* need to register with instance 0 */
+	bat->notif.event.mask = SSAM_EVENT_MASK_TARGET;
+	bat->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+	bat->psy_desc.name = bat->name;
+	bat->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	bat->psy_desc.get_property = spwr_battery_get_property;
+
+	INIT_DELAYED_WORK(&bat->update_work, spwr_battery_update_bst_workfn);
+}
+
+static int spwr_battery_register(struct spwr_battery_device *bat)
+{
+	struct power_supply_config psy_cfg = {};
+	__le32 sta;
+	int status;
+
+	/* Make sure the device is there and functioning properly. */
+	status = ssam_retry(ssam_bat_get_sta, bat->sdev, &sta);
+	if (status)
+		return status;
+
+	if ((le32_to_cpu(sta) & SAM_BATTERY_STA_OK) != SAM_BATTERY_STA_OK)
+		return -ENODEV;
+
+	/* Satisfy lockdep although we are in an exclusive context here. */
+	mutex_lock(&bat->lock);
+
+	status = spwr_battery_update_bix_unlocked(bat);
+	if (status) {
+		mutex_unlock(&bat->lock);
+		return status;
+	}
+
+	if (spwr_battery_present(bat)) {
+		u32 cap_warn = get_unaligned_le32(&bat->bix.design_cap_warn);
+
+		status = spwr_battery_set_alarm_unlocked(bat, cap_warn);
+		if (status) {
+			mutex_unlock(&bat->lock);
+			return status;
+		}
+	}
+
+	mutex_unlock(&bat->lock);
+
+	bat->psy_desc.external_power_changed = spwr_external_power_changed;
+
+	switch (get_unaligned_le32(&bat->bix.power_unit)) {
+	case SAM_BATTERY_POWER_UNIT_mW:
+		bat->psy_desc.properties = spwr_battery_props_eng;
+		bat->psy_desc.num_properties = ARRAY_SIZE(spwr_battery_props_eng);
+		break;
+
+	case SAM_BATTERY_POWER_UNIT_mA:
+		bat->psy_desc.properties = spwr_battery_props_chg;
+		bat->psy_desc.num_properties = ARRAY_SIZE(spwr_battery_props_chg);
+		break;
+
+	default:
+		dev_err(&bat->sdev->dev, "unsupported battery power unit: %u\n",
+			get_unaligned_le32(&bat->bix.power_unit));
+		return -EINVAL;
+	}
+
+	psy_cfg.drv_data = bat;
+	psy_cfg.attr_grp = spwr_battery_groups;
+
+	bat->psy = devm_power_supply_register(&bat->sdev->dev, &bat->psy_desc, &psy_cfg);
+	if (IS_ERR(bat->psy))
+		return PTR_ERR(bat->psy);
+
+	return ssam_device_notifier_register(bat->sdev, &bat->notif);
+}
+
+
+/* -- Driver setup. --------------------------------------------------------- */
+
+static int __maybe_unused surface_battery_resume(struct device *dev)
+{
+	return spwr_battery_recheck_full(dev_get_drvdata(dev));
+}
+static SIMPLE_DEV_PM_OPS(surface_battery_pm_ops, NULL, surface_battery_resume);
+
+static int surface_battery_probe(struct ssam_device *sdev)
+{
+	const struct spwr_psy_properties *p;
+	struct spwr_battery_device *bat;
+
+	p = ssam_device_get_match_data(sdev);
+	if (!p)
+		return -ENODEV;
+
+	bat = devm_kzalloc(&sdev->dev, sizeof(*bat), GFP_KERNEL);
+	if (!bat)
+		return -ENOMEM;
+
+	spwr_battery_init(bat, sdev, p->registry, p->name);
+	ssam_device_set_drvdata(sdev, bat);
+
+	return spwr_battery_register(bat);
+}
+
+static void surface_battery_remove(struct ssam_device *sdev)
+{
+	struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev);
+
+	ssam_device_notifier_unregister(sdev, &bat->notif);
+	cancel_delayed_work_sync(&bat->update_work);
+}
+
+static const struct spwr_psy_properties spwr_psy_props_bat1 = {
+	.name = "BAT1",
+	.registry = SSAM_EVENT_REGISTRY_SAM,
+};
+
+static const struct spwr_psy_properties spwr_psy_props_bat2_sb3 = {
+	.name = "BAT2",
+	.registry = SSAM_EVENT_REGISTRY_KIP,
+};
+
+static const struct ssam_device_id surface_battery_match[] = {
+	{ SSAM_SDEV(BAT, 0x01, 0x01, 0x00), (unsigned long)&spwr_psy_props_bat1     },
+	{ SSAM_SDEV(BAT, 0x02, 0x01, 0x00), (unsigned long)&spwr_psy_props_bat2_sb3 },
+	{ },
+};
+MODULE_DEVICE_TABLE(ssam, surface_battery_match);
+
+static struct ssam_device_driver surface_battery_driver = {
+	.probe = surface_battery_probe,
+	.remove = surface_battery_remove,
+	.match_table = surface_battery_match,
+	.driver = {
+		.name = "surface_battery",
+		.pm = &surface_battery_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_ssam_device_driver(surface_battery_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Battery driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c
new file mode 100644
index 000000000..59182d557
--- /dev/null
+++ b/drivers/power/supply/surface_charger.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AC driver for 7th-generation Microsoft Surface devices via Surface System
+ * Aggregator Module (SSAM).
+ *
+ * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/device.h>
+
+
+/* -- SAM interface. -------------------------------------------------------- */
+
+enum sam_event_cid_bat {
+	SAM_EVENT_CID_BAT_ADP   = 0x17,
+};
+
+enum sam_battery_sta {
+	SAM_BATTERY_STA_OK      = 0x0f,
+	SAM_BATTERY_STA_PRESENT	= 0x10,
+};
+
+/* Get battery status (_STA). */
+SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_sta, __le32, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x01,
+});
+
+/* Get platform power source for battery (_PSR / DPTF PSRC). */
+SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_psrc, __le32, {
+	.target_category = SSAM_SSH_TC_BAT,
+	.command_id      = 0x0d,
+});
+
+
+/* -- Device structures. ---------------------------------------------------- */
+
+struct spwr_psy_properties {
+	const char *name;
+	struct ssam_event_registry registry;
+};
+
+struct spwr_ac_device {
+	struct ssam_device *sdev;
+
+	char name[32];
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+
+	struct ssam_event_notifier notif;
+
+	struct mutex lock;  /* Guards access to state below. */
+
+	__le32 state;
+};
+
+
+/* -- State management. ----------------------------------------------------- */
+
+static int spwr_ac_update_unlocked(struct spwr_ac_device *ac)
+{
+	__le32 old = ac->state;
+	int status;
+
+	lockdep_assert_held(&ac->lock);
+
+	status = ssam_retry(ssam_bat_get_psrc, ac->sdev, &ac->state);
+	if (status < 0)
+		return status;
+
+	return old != ac->state;
+}
+
+static int spwr_ac_update(struct spwr_ac_device *ac)
+{
+	int status;
+
+	mutex_lock(&ac->lock);
+	status = spwr_ac_update_unlocked(ac);
+	mutex_unlock(&ac->lock);
+
+	return status;
+}
+
+static int spwr_ac_recheck(struct spwr_ac_device *ac)
+{
+	int status;
+
+	status = spwr_ac_update(ac);
+	if (status > 0)
+		power_supply_changed(ac->psy);
+
+	return status >= 0 ? 0 : status;
+}
+
+static u32 spwr_notify_ac(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct spwr_ac_device *ac;
+	int status;
+
+	ac = container_of(nf, struct spwr_ac_device, notif);
+
+	dev_dbg(&ac->sdev->dev, "power event (cid = %#04x, iid = %#04x, tid = %#04x)\n",
+		event->command_id, event->instance_id, event->target_id);
+
+	/*
+	 * Allow events of all targets/instances here. Global adapter status
+	 * seems to be handled via target=1 and instance=1, but events are
+	 * reported on all targets/instances in use.
+	 *
+	 * While it should be enough to just listen on 1/1, listen everywhere to
+	 * make sure we don't miss anything.
+	 */
+
+	switch (event->command_id) {
+	case SAM_EVENT_CID_BAT_ADP:
+		status = spwr_ac_recheck(ac);
+		return ssam_notifier_from_errno(status) | SSAM_NOTIF_HANDLED;
+
+	default:
+		return 0;
+	}
+}
+
+
+/* -- Properties. ----------------------------------------------------------- */
+
+static const enum power_supply_property spwr_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int spwr_ac_get_property(struct power_supply *psy, enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct spwr_ac_device *ac = power_supply_get_drvdata(psy);
+	int status;
+
+	mutex_lock(&ac->lock);
+
+	status = spwr_ac_update_unlocked(ac);
+	if (status)
+		goto out;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!le32_to_cpu(ac->state);
+		break;
+
+	default:
+		status = -EINVAL;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&ac->lock);
+	return status;
+}
+
+
+/* -- Device setup. --------------------------------------------------------- */
+
+static char *battery_supplied_to[] = {
+	"BAT1",
+	"BAT2",
+};
+
+static void spwr_ac_init(struct spwr_ac_device *ac, struct ssam_device *sdev,
+			 struct ssam_event_registry registry, const char *name)
+{
+	mutex_init(&ac->lock);
+	strncpy(ac->name, name, ARRAY_SIZE(ac->name) - 1);
+
+	ac->sdev = sdev;
+
+	ac->notif.base.priority = 1;
+	ac->notif.base.fn = spwr_notify_ac;
+	ac->notif.event.reg = registry;
+	ac->notif.event.id.target_category = sdev->uid.category;
+	ac->notif.event.id.instance = 0;
+	ac->notif.event.mask = SSAM_EVENT_MASK_NONE;
+	ac->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+	ac->psy_desc.name = ac->name;
+	ac->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	ac->psy_desc.properties = spwr_ac_props;
+	ac->psy_desc.num_properties = ARRAY_SIZE(spwr_ac_props);
+	ac->psy_desc.get_property = spwr_ac_get_property;
+}
+
+static int spwr_ac_register(struct spwr_ac_device *ac)
+{
+	struct power_supply_config psy_cfg = {};
+	__le32 sta;
+	int status;
+
+	/* Make sure the device is there and functioning properly. */
+	status = ssam_retry(ssam_bat_get_sta, ac->sdev, &sta);
+	if (status)
+		return status;
+
+	if ((le32_to_cpu(sta) & SAM_BATTERY_STA_OK) != SAM_BATTERY_STA_OK)
+		return -ENODEV;
+
+	psy_cfg.drv_data = ac;
+	psy_cfg.supplied_to = battery_supplied_to;
+	psy_cfg.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+	ac->psy = devm_power_supply_register(&ac->sdev->dev, &ac->psy_desc, &psy_cfg);
+	if (IS_ERR(ac->psy))
+		return PTR_ERR(ac->psy);
+
+	return ssam_device_notifier_register(ac->sdev, &ac->notif);
+}
+
+
+/* -- Driver setup. --------------------------------------------------------- */
+
+static int __maybe_unused surface_ac_resume(struct device *dev)
+{
+	return spwr_ac_recheck(dev_get_drvdata(dev));
+}
+static SIMPLE_DEV_PM_OPS(surface_ac_pm_ops, NULL, surface_ac_resume);
+
+static int surface_ac_probe(struct ssam_device *sdev)
+{
+	const struct spwr_psy_properties *p;
+	struct spwr_ac_device *ac;
+
+	p = ssam_device_get_match_data(sdev);
+	if (!p)
+		return -ENODEV;
+
+	ac = devm_kzalloc(&sdev->dev, sizeof(*ac), GFP_KERNEL);
+	if (!ac)
+		return -ENOMEM;
+
+	spwr_ac_init(ac, sdev, p->registry, p->name);
+	ssam_device_set_drvdata(sdev, ac);
+
+	return spwr_ac_register(ac);
+}
+
+static void surface_ac_remove(struct ssam_device *sdev)
+{
+	struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev);
+
+	ssam_device_notifier_unregister(sdev, &ac->notif);
+}
+
+static const struct spwr_psy_properties spwr_psy_props_adp1 = {
+	.name = "ADP1",
+	.registry = SSAM_EVENT_REGISTRY_SAM,
+};
+
+static const struct ssam_device_id surface_ac_match[] = {
+	{ SSAM_SDEV(BAT, 0x01, 0x01, 0x01), (unsigned long)&spwr_psy_props_adp1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(ssam, surface_ac_match);
+
+static struct ssam_device_driver surface_ac_driver = {
+	.probe = surface_ac_probe,
+	.remove = surface_ac_remove,
+	.match_table = surface_ac_match,
+	.driver = {
+		.name = "surface_ac",
+		.pm = &surface_ac_pm_ops,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_ssam_device_driver(surface_ac_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("AC driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
new file mode 100644
index 000000000..5f510ddc9
--- /dev/null
+++ b/drivers/power/supply/test_power.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power supply driver for testing.
+ *
+ * Copyright 2010  Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * Dynamic module parameter code from the Virtual Battery Driver
+ * Copyright (C) 2008 Pylone, Inc.
+ * By: Masashi YOKOTA <yokota@pylone.jp>
+ * Originally found here:
+ * http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <generated/utsrelease.h>
+
+enum test_power_id {
+	TEST_AC,
+	TEST_BATTERY,
+	TEST_USB,
+	TEST_POWER_NUM,
+};
+
+static int ac_online			= 1;
+static int usb_online			= 1;
+static int battery_status		= POWER_SUPPLY_STATUS_DISCHARGING;
+static int battery_health		= POWER_SUPPLY_HEALTH_GOOD;
+static int battery_present		= 1; /* true */
+static int battery_technology		= POWER_SUPPLY_TECHNOLOGY_LION;
+static int battery_capacity		= 50;
+static int battery_voltage		= 3300;
+static int battery_charge_counter	= -1000;
+static int battery_current		= -1600;
+
+static bool module_initialized;
+
+static int test_power_get_ac_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ac_online;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int test_power_get_usb_property(struct power_supply *psy,
+				      enum power_supply_property psp,
+				      union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = usb_online;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int test_power_get_battery_property(struct power_supply *psy,
+					   enum power_supply_property psp,
+					   union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = "Test battery";
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = "Linux";
+		break;
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		val->strval = UTS_RELEASE;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = battery_status;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = battery_health;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = battery_present;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = battery_technology;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = battery_capacity;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+		val->intval = battery_charge_counter;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = 100;
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		val->intval = 3600;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = 26;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = battery_voltage;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = battery_current;
+		break;
+	default:
+		pr_info("%s: some properties deliberately report errors.\n",
+			__func__);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property test_power_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property test_power_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_COUNTER,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static char *test_power_ac_supplied_to[] = {
+	"test_battery",
+};
+
+static struct power_supply *test_power_supplies[TEST_POWER_NUM];
+
+static const struct power_supply_desc test_power_desc[] = {
+	[TEST_AC] = {
+		.name = "test_ac",
+		.type = POWER_SUPPLY_TYPE_MAINS,
+		.properties = test_power_ac_props,
+		.num_properties = ARRAY_SIZE(test_power_ac_props),
+		.get_property = test_power_get_ac_property,
+	},
+	[TEST_BATTERY] = {
+		.name = "test_battery",
+		.type = POWER_SUPPLY_TYPE_BATTERY,
+		.properties = test_power_battery_props,
+		.num_properties = ARRAY_SIZE(test_power_battery_props),
+		.get_property = test_power_get_battery_property,
+	},
+	[TEST_USB] = {
+		.name = "test_usb",
+		.type = POWER_SUPPLY_TYPE_USB,
+		.properties = test_power_ac_props,
+		.num_properties = ARRAY_SIZE(test_power_ac_props),
+		.get_property = test_power_get_usb_property,
+	},
+};
+
+static const struct power_supply_config test_power_configs[] = {
+	{
+		/* test_ac */
+		.supplied_to = test_power_ac_supplied_to,
+		.num_supplicants = ARRAY_SIZE(test_power_ac_supplied_to),
+	}, {
+		/* test_battery */
+	}, {
+		/* test_usb */
+		.supplied_to = test_power_ac_supplied_to,
+		.num_supplicants = ARRAY_SIZE(test_power_ac_supplied_to),
+	},
+};
+
+static int __init test_power_init(void)
+{
+	int i;
+	int ret;
+
+	BUILD_BUG_ON(TEST_POWER_NUM != ARRAY_SIZE(test_power_supplies));
+	BUILD_BUG_ON(TEST_POWER_NUM != ARRAY_SIZE(test_power_configs));
+
+	for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) {
+		test_power_supplies[i] = power_supply_register(NULL,
+						&test_power_desc[i],
+						&test_power_configs[i]);
+		if (IS_ERR(test_power_supplies[i])) {
+			pr_err("%s: failed to register %s\n", __func__,
+				test_power_desc[i].name);
+			ret = PTR_ERR(test_power_supplies[i]);
+			goto failed;
+		}
+	}
+
+	module_initialized = true;
+	return 0;
+failed:
+	while (--i >= 0)
+		power_supply_unregister(test_power_supplies[i]);
+	return ret;
+}
+module_init(test_power_init);
+
+static void __exit test_power_exit(void)
+{
+	int i;
+
+	/* Let's see how we handle changes... */
+	ac_online = 0;
+	usb_online = 0;
+	battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+	for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+		power_supply_changed(test_power_supplies[i]);
+	pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n",
+		__func__);
+	ssleep(10);
+
+	for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+		power_supply_unregister(test_power_supplies[i]);
+
+	module_initialized = false;
+}
+module_exit(test_power_exit);
+
+
+
+#define MAX_KEYLENGTH 256
+struct battery_property_map {
+	int value;
+	char const *key;
+};
+
+static struct battery_property_map map_ac_online[] = {
+	{ 0,  "off"  },
+	{ 1,  "on" },
+	{ -1, NULL  },
+};
+
+static struct battery_property_map map_status[] = {
+	{ POWER_SUPPLY_STATUS_CHARGING,     "charging"     },
+	{ POWER_SUPPLY_STATUS_DISCHARGING,  "discharging"  },
+	{ POWER_SUPPLY_STATUS_NOT_CHARGING, "not-charging" },
+	{ POWER_SUPPLY_STATUS_FULL,         "full"         },
+	{ -1,                               NULL           },
+};
+
+static struct battery_property_map map_health[] = {
+	{ POWER_SUPPLY_HEALTH_GOOD,           "good"        },
+	{ POWER_SUPPLY_HEALTH_OVERHEAT,       "overheat"    },
+	{ POWER_SUPPLY_HEALTH_DEAD,           "dead"        },
+	{ POWER_SUPPLY_HEALTH_OVERVOLTAGE,    "overvoltage" },
+	{ POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, "failure"     },
+	{ -1,                                 NULL          },
+};
+
+static struct battery_property_map map_present[] = {
+	{ 0,  "false" },
+	{ 1,  "true"  },
+	{ -1, NULL    },
+};
+
+static struct battery_property_map map_technology[] = {
+	{ POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" },
+	{ POWER_SUPPLY_TECHNOLOGY_LION, "LION" },
+	{ POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" },
+	{ POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" },
+	{ POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" },
+	{ POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" },
+	{ -1,				NULL   },
+};
+
+
+static int map_get_value(struct battery_property_map *map, const char *key,
+				int def_val)
+{
+	char buf[MAX_KEYLENGTH];
+	int cr;
+
+	strncpy(buf, key, MAX_KEYLENGTH);
+	buf[MAX_KEYLENGTH-1] = '\0';
+
+	cr = strnlen(buf, MAX_KEYLENGTH) - 1;
+	if (cr < 0)
+		return def_val;
+	if (buf[cr] == '\n')
+		buf[cr] = '\0';
+
+	while (map->key) {
+		if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0)
+			return map->value;
+		map++;
+	}
+
+	return def_val;
+}
+
+
+static const char *map_get_key(struct battery_property_map *map, int value,
+				const char *def_key)
+{
+	while (map->key) {
+		if (map->value == value)
+			return map->key;
+		map++;
+	}
+
+	return def_key;
+}
+
+static inline void signal_power_supply_changed(struct power_supply *psy)
+{
+	if (module_initialized)
+		power_supply_changed(psy);
+}
+
+static int param_set_ac_online(const char *key, const struct kernel_param *kp)
+{
+	ac_online = map_get_value(map_ac_online, key, ac_online);
+	signal_power_supply_changed(test_power_supplies[TEST_AC]);
+	return 0;
+}
+
+static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, ac_online, "unknown"));
+}
+
+static int param_set_usb_online(const char *key, const struct kernel_param *kp)
+{
+	usb_online = map_get_value(map_ac_online, key, usb_online);
+	signal_power_supply_changed(test_power_supplies[TEST_USB]);
+	return 0;
+}
+
+static int param_get_usb_online(char *buffer, const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, usb_online, "unknown"));
+}
+
+static int param_set_battery_status(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_status = map_get_value(map_status, key, battery_status);
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_status, "unknown"));
+}
+
+static int param_set_battery_health(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_health = map_get_value(map_health, key, battery_health);
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_health, "unknown"));
+}
+
+static int param_set_battery_present(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_present = map_get_value(map_present, key, battery_present);
+	signal_power_supply_changed(test_power_supplies[TEST_AC]);
+	return 0;
+}
+
+static int param_get_battery_present(char *buffer,
+					const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_present, "unknown"));
+}
+
+static int param_set_battery_technology(const char *key,
+					const struct kernel_param *kp)
+{
+	battery_technology = map_get_value(map_technology, key,
+						battery_technology);
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+static int param_get_battery_technology(char *buffer,
+					const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_technology,
+					"unknown"));
+}
+
+static int param_set_battery_capacity(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_capacity = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_capacity param_get_int
+
+static int param_set_battery_voltage(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_voltage = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_voltage param_get_int
+
+static int param_set_battery_charge_counter(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_charge_counter = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_charge_counter param_get_int
+
+static int param_set_battery_current(const char *key,
+					const struct kernel_param *kp)
+{
+	int tmp;
+
+	if (1 != sscanf(key, "%d", &tmp))
+		return -EINVAL;
+
+	battery_current = tmp;
+	signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+	return 0;
+}
+
+#define param_get_battery_current param_get_int
+
+static const struct kernel_param_ops param_ops_ac_online = {
+	.set = param_set_ac_online,
+	.get = param_get_ac_online,
+};
+
+static const struct kernel_param_ops param_ops_usb_online = {
+	.set = param_set_usb_online,
+	.get = param_get_usb_online,
+};
+
+static const struct kernel_param_ops param_ops_battery_status = {
+	.set = param_set_battery_status,
+	.get = param_get_battery_status,
+};
+
+static const struct kernel_param_ops param_ops_battery_present = {
+	.set = param_set_battery_present,
+	.get = param_get_battery_present,
+};
+
+static const struct kernel_param_ops param_ops_battery_technology = {
+	.set = param_set_battery_technology,
+	.get = param_get_battery_technology,
+};
+
+static const struct kernel_param_ops param_ops_battery_health = {
+	.set = param_set_battery_health,
+	.get = param_get_battery_health,
+};
+
+static const struct kernel_param_ops param_ops_battery_capacity = {
+	.set = param_set_battery_capacity,
+	.get = param_get_battery_capacity,
+};
+
+static const struct kernel_param_ops param_ops_battery_voltage = {
+	.set = param_set_battery_voltage,
+	.get = param_get_battery_voltage,
+};
+
+static const struct kernel_param_ops param_ops_battery_charge_counter = {
+	.set = param_set_battery_charge_counter,
+	.get = param_get_battery_charge_counter,
+};
+
+static const struct kernel_param_ops param_ops_battery_current = {
+	.set = param_set_battery_current,
+	.get = param_get_battery_current,
+};
+
+#define param_check_ac_online(name, p) __param_check(name, p, void);
+#define param_check_usb_online(name, p) __param_check(name, p, void);
+#define param_check_battery_status(name, p) __param_check(name, p, void);
+#define param_check_battery_present(name, p) __param_check(name, p, void);
+#define param_check_battery_technology(name, p) __param_check(name, p, void);
+#define param_check_battery_health(name, p) __param_check(name, p, void);
+#define param_check_battery_capacity(name, p) __param_check(name, p, void);
+#define param_check_battery_voltage(name, p) __param_check(name, p, void);
+#define param_check_battery_charge_counter(name, p) __param_check(name, p, void);
+#define param_check_battery_current(name, p) __param_check(name, p, void);
+
+
+module_param(ac_online, ac_online, 0644);
+MODULE_PARM_DESC(ac_online, "AC charging state <on|off>");
+
+module_param(usb_online, usb_online, 0644);
+MODULE_PARM_DESC(usb_online, "USB charging state <on|off>");
+
+module_param(battery_status, battery_status, 0644);
+MODULE_PARM_DESC(battery_status,
+	"battery status <charging|discharging|not-charging|full>");
+
+module_param(battery_present, battery_present, 0644);
+MODULE_PARM_DESC(battery_present,
+	"battery presence state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_technology, battery_technology, 0644);
+MODULE_PARM_DESC(battery_technology,
+	"battery technology <NiMH|LION|LIPO|LiFe|NiCd|LiMn>");
+
+module_param(battery_health, battery_health, 0644);
+MODULE_PARM_DESC(battery_health,
+	"battery health state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_capacity, battery_capacity, 0644);
+MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
+
+module_param(battery_voltage, battery_voltage, 0644);
+MODULE_PARM_DESC(battery_voltage, "battery voltage (millivolts)");
+
+module_param(battery_charge_counter, battery_charge_counter, 0644);
+MODULE_PARM_DESC(battery_charge_counter,
+	"battery charge counter (microampere-hours)");
+
+module_param(battery_current, battery_current, 0644);
+MODULE_PARM_DESC(battery_current, "battery current (milliampere)");
+
+MODULE_DESCRIPTION("Power supply driver for testing");
+MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c
new file mode 100644
index 000000000..73d4aca4c
--- /dev/null
+++ b/drivers/power/supply/tosa_battery.c
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+
+#include <asm/mach-types.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+	int status;
+	struct power_supply *psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct tosa_bat *bat);
+	struct gpio_desc *gpiod_full;
+	struct gpio_desc *gpiod_charge_off;
+
+	int technology;
+
+	struct gpio_desc *gpiod_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	struct gpio_desc *gpiod_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct gpio_desc *jacket_detect;
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (!bat->gpiod_bat || bat->adc_bat < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpiod_set_value(bat->gpiod_bat, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
+			bat->adc_bat);
+	gpiod_set_value(bat->gpiod_bat, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (!bat->gpiod_temp || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpiod_set_value(bat->gpiod_temp, 1);
+	msleep(5);
+	value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
+			bat->adc_temp);
+	gpiod_set_value(bat->gpiod_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct tosa_bat *bat = power_supply_get_drvdata(psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = tosa_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = tosa_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+	return gpiod_get_value(jacket_detect) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("tosa_bat_gpio irq\n");
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+	int old;
+	struct power_supply *psy = bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->desc->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpiod_set_value(bat->gpiod_charge_off, 0);
+			mdelay(15);
+		}
+
+		if (gpiod_get_value(bat->gpiod_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = tosa_read_bat(bat);
+
+			gpiod_set_value(bat->gpiod_charge_off, 1);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpiod_set_value(bat->gpiod_charge_off, 0);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpiod_set_value(bat->gpiod_charge_off, 1);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+	tosa_bat_update(&tosa_bat_main);
+	tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static const struct power_supply_desc tosa_bat_main_desc = {
+	.name		= "main-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= tosa_bat_main_props,
+	.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+	.get_property	= tosa_bat_get_property,
+	.external_power_changed = tosa_bat_external_power_changed,
+	.use_for_apm	= 1,
+};
+
+static const struct power_supply_desc tosa_bat_jacket_desc = {
+	.name		= "jacket-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= tosa_bat_main_props,
+	.num_properties	= ARRAY_SIZE(tosa_bat_main_props),
+	.get_property	= tosa_bat_get_property,
+	.external_power_changed = tosa_bat_external_power_changed,
+};
+
+static const struct power_supply_desc tosa_bat_bu_desc = {
+	.name		= "backup-battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.properties	= tosa_bat_bu_props,
+	.num_properties	= ARRAY_SIZE(tosa_bat_bu_props),
+	.get_property	= tosa_bat_get_property,
+	.external_power_changed = tosa_bat_external_power_changed,
+};
+
+static struct tosa_bat tosa_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = NULL,
+
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpiod_bat = NULL,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpiod_temp = NULL,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = NULL,
+
+	.is_present = tosa_jacket_bat_is_present,
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpiod_bat = NULL,
+	.adc_bat = WM97XX_AUX_ID3,
+	.adc_bat_divider = 414,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpiod_temp = NULL,
+	.adc_temp = WM97XX_AUX_ID2,
+	.adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+	.psy = NULL,
+
+	.gpiod_full = NULL,
+	.gpiod_charge_off = NULL,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpiod_bat = NULL,
+	.adc_bat = WM97XX_AUX_ID4,
+	.adc_bat_divider = 1266,
+
+	.gpiod_temp = NULL,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+	/* flush all pending status updates */
+	flush_work(&bat_work);
+	return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int tosa_bat_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct power_supply_config main_psy_cfg = {},
+				   jacket_psy_cfg = {},
+				   bu_psy_cfg = {};
+	struct device *dev = &pdev->dev;
+	struct gpio_desc *dummy;
+
+	if (!machine_is_tosa())
+		return -ENODEV;
+
+	/* Main charging control GPIOs */
+	tosa_bat_main.gpiod_charge_off = devm_gpiod_get(dev, "main charge off", GPIOD_OUT_HIGH);
+	if (IS_ERR(tosa_bat_main.gpiod_charge_off))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_charge_off),
+				     "no main charger GPIO\n");
+	tosa_bat_jacket.gpiod_charge_off = devm_gpiod_get(dev, "jacket charge off", GPIOD_OUT_HIGH);
+	if (IS_ERR(tosa_bat_jacket.gpiod_charge_off))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_charge_off),
+				     "no jacket charger GPIO\n");
+
+	/* Per-battery output check (routes battery voltage to ADC) */
+	tosa_bat_main.gpiod_bat = devm_gpiod_get(dev, "main battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_main.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_bat),
+				     "no main battery GPIO\n");
+	tosa_bat_jacket.gpiod_bat = devm_gpiod_get(dev, "jacket battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_jacket.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_bat),
+				     "no jacket battery GPIO\n");
+	tosa_bat_bu.gpiod_bat = devm_gpiod_get(dev, "backup battery", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_bu.gpiod_bat))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_bu.gpiod_bat),
+				     "no backup battery GPIO\n");
+
+	/* Battery full detect GPIOs (using PXA SoC GPIOs) */
+	tosa_bat_main.gpiod_full = devm_gpiod_get(dev, "main battery full", GPIOD_IN);
+	if (IS_ERR(tosa_bat_main.gpiod_full))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_full),
+				     "no main battery full GPIO\n");
+	tosa_bat_jacket.gpiod_full = devm_gpiod_get(dev, "jacket battery full", GPIOD_IN);
+	if (IS_ERR(tosa_bat_jacket.gpiod_full))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_full),
+				     "no jacket battery full GPIO\n");
+
+	/* Battery temperature GPIOs (routes thermistor voltage to ADC) */
+	tosa_bat_main.gpiod_temp = devm_gpiod_get(dev, "main battery temp", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_main.gpiod_temp))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_main.gpiod_temp),
+				     "no main battery temp GPIO\n");
+	tosa_bat_jacket.gpiod_temp = devm_gpiod_get(dev, "jacket battery temp", GPIOD_OUT_LOW);
+	if (IS_ERR(tosa_bat_jacket.gpiod_temp))
+		return dev_err_probe(dev, PTR_ERR(tosa_bat_jacket.gpiod_temp),
+				     "no jacket battery temp GPIO\n");
+
+	/* Jacket detect GPIO */
+	jacket_detect = devm_gpiod_get(dev, "jacket detect", GPIOD_IN);
+	if (IS_ERR(jacket_detect))
+		return dev_err_probe(dev, PTR_ERR(jacket_detect),
+				     "no jacket detect GPIO\n");
+
+	/* Battery low indication GPIOs (not used, we just request them) */
+	dummy = devm_gpiod_get(dev, "main battery low", GPIOD_IN);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no main battery low GPIO\n");
+	dummy = devm_gpiod_get(dev, "jacket battery low", GPIOD_IN);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no jacket battery low GPIO\n");
+
+	/* Battery switch GPIO (not used just requested) */
+	dummy = devm_gpiod_get(dev, "battery switch", GPIOD_OUT_LOW);
+	if (IS_ERR(dummy))
+		return dev_err_probe(dev, PTR_ERR(dummy),
+				     "no battery switch GPIO\n");
+
+	mutex_init(&tosa_bat_main.work_lock);
+	mutex_init(&tosa_bat_jacket.work_lock);
+
+	INIT_WORK(&bat_work, tosa_bat_work);
+
+	main_psy_cfg.drv_data = &tosa_bat_main;
+	tosa_bat_main.psy = power_supply_register(dev,
+						  &tosa_bat_main_desc,
+						  &main_psy_cfg);
+	if (IS_ERR(tosa_bat_main.psy)) {
+		ret = PTR_ERR(tosa_bat_main.psy);
+		goto err_psy_reg_main;
+	}
+
+	jacket_psy_cfg.drv_data = &tosa_bat_jacket;
+	tosa_bat_jacket.psy = power_supply_register(dev,
+						    &tosa_bat_jacket_desc,
+						    &jacket_psy_cfg);
+	if (IS_ERR(tosa_bat_jacket.psy)) {
+		ret = PTR_ERR(tosa_bat_jacket.psy);
+		goto err_psy_reg_jacket;
+	}
+
+	bu_psy_cfg.drv_data = &tosa_bat_bu;
+	tosa_bat_bu.psy = power_supply_register(dev, &tosa_bat_bu_desc,
+						&bu_psy_cfg);
+	if (IS_ERR(tosa_bat_bu.psy)) {
+		ret = PTR_ERR(tosa_bat_bu.psy);
+		goto err_psy_reg_bu;
+	}
+
+	ret = request_irq(gpiod_to_irq(tosa_bat_main.gpiod_full),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &tosa_bat_main);
+	if (ret)
+		goto err_req_main;
+
+	ret = request_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket full", &tosa_bat_jacket);
+	if (ret)
+		goto err_req_jacket;
+
+	ret = request_irq(gpiod_to_irq(jacket_detect),
+				tosa_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"jacket detect", &tosa_bat_jacket);
+	if (!ret) {
+		schedule_work(&bat_work);
+		return 0;
+	}
+
+	free_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full), &tosa_bat_jacket);
+err_req_jacket:
+	free_irq(gpiod_to_irq(tosa_bat_main.gpiod_full), &tosa_bat_main);
+err_req_main:
+	power_supply_unregister(tosa_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+	power_supply_unregister(tosa_bat_main.psy);
+err_psy_reg_main:
+
+	/* see comment in tosa_bat_remove */
+	cancel_work_sync(&bat_work);
+
+	return ret;
+}
+
+static int tosa_bat_remove(struct platform_device *dev)
+{
+	free_irq(gpiod_to_irq(jacket_detect), &tosa_bat_jacket);
+	free_irq(gpiod_to_irq(tosa_bat_jacket.gpiod_full), &tosa_bat_jacket);
+	free_irq(gpiod_to_irq(tosa_bat_main.gpiod_full), &tosa_bat_main);
+
+	power_supply_unregister(tosa_bat_bu.psy);
+	power_supply_unregister(tosa_bat_jacket.psy);
+	power_supply_unregister(tosa_bat_main.psy);
+
+	/*
+	 * Now cancel the bat_work.  We won't get any more schedules,
+	 * since all sources (isr and external_power_changed) are
+	 * unregistered now.
+	 */
+	cancel_work_sync(&bat_work);
+	return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+	.driver.name	= "wm97xx-battery",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tosa_bat_probe,
+	.remove		= tosa_bat_remove,
+	.suspend	= tosa_bat_suspend,
+	.resume		= tosa_bat_resume,
+};
+
+module_platform_driver(tosa_bat_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/power/supply/tps65090-charger.c b/drivers/power/supply/tps65090-charger.c
new file mode 100644
index 000000000..0990b2fa6
--- /dev/null
+++ b/drivers/power/supply/tps65090-charger.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery charger driver for TI's tps65090
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/freezer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/tps65090.h>
+
+#define TPS65090_CHARGER_ENABLE	BIT(0)
+#define TPS65090_VACG		BIT(1)
+#define TPS65090_NOITERM	BIT(5)
+
+#define POLL_INTERVAL		(HZ * 2)	/* Used when no irq */
+
+struct tps65090_charger {
+	struct	device	*dev;
+	int	ac_online;
+	int	prev_ac_online;
+	int	irq;
+	struct task_struct	*poll_task;
+	bool			passive_mode;
+	struct power_supply	*ac;
+	struct tps65090_platform_data *pdata;
+};
+
+static enum power_supply_property tps65090_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int tps65090_low_chrg_current(struct tps65090_charger *charger)
+{
+	int ret;
+
+	if (charger->passive_mode)
+		return 0;
+
+	ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL5,
+			TPS65090_NOITERM);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+			__func__, TPS65090_REG_CG_CTRL5);
+		return ret;
+	}
+	return 0;
+}
+
+static int tps65090_enable_charging(struct tps65090_charger *charger)
+{
+	int ret;
+	uint8_t ctrl0 = 0;
+
+	if (charger->passive_mode)
+		return 0;
+
+	ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+			    &ctrl0);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+				__func__, TPS65090_REG_CG_CTRL0);
+		return ret;
+	}
+
+	ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+				(ctrl0 | TPS65090_CHARGER_ENABLE));
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): error writing in register 0x%x\n",
+				__func__, TPS65090_REG_CG_CTRL0);
+		return ret;
+	}
+	return 0;
+}
+
+static int tps65090_config_charger(struct tps65090_charger *charger)
+{
+	uint8_t intrmask = 0;
+	int ret;
+
+	if (charger->passive_mode)
+		return 0;
+
+	if (charger->pdata->enable_low_current_chrg) {
+		ret = tps65090_low_chrg_current(charger);
+		if (ret < 0) {
+			dev_err(charger->dev,
+				"error configuring low charge current\n");
+			return ret;
+		}
+	}
+
+	/* Enable the VACG interrupt for AC power detect */
+	ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_MASK,
+			    &intrmask);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+			__func__, TPS65090_REG_INTR_MASK);
+		return ret;
+	}
+
+	ret = tps65090_write(charger->dev->parent, TPS65090_REG_INTR_MASK,
+			     (intrmask | TPS65090_VACG));
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): error writing in register 0x%x\n",
+			__func__, TPS65090_REG_CG_CTRL0);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65090_ac_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct tps65090_charger *charger = power_supply_get_drvdata(psy);
+
+	if (psp == POWER_SUPPLY_PROP_ONLINE) {
+		val->intval = charger->ac_online;
+		charger->prev_ac_online = charger->ac_online;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static irqreturn_t tps65090_charger_isr(int irq, void *dev_id)
+{
+	struct tps65090_charger *charger = dev_id;
+	int ret;
+	uint8_t status1 = 0;
+	uint8_t intrsts = 0;
+
+	ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_STATUS1,
+			    &status1);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+				__func__, TPS65090_REG_CG_STATUS1);
+		return IRQ_HANDLED;
+	}
+	msleep(75);
+	ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_STS,
+			    &intrsts);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+				__func__, TPS65090_REG_INTR_STS);
+		return IRQ_HANDLED;
+	}
+
+	if (intrsts & TPS65090_VACG) {
+		ret = tps65090_enable_charging(charger);
+		if (ret < 0)
+			return IRQ_HANDLED;
+		charger->ac_online = 1;
+	} else {
+		charger->ac_online = 0;
+	}
+
+	/* Clear interrupts. */
+	if (!charger->passive_mode) {
+		ret = tps65090_write(charger->dev->parent,
+				     TPS65090_REG_INTR_STS, 0x00);
+		if (ret < 0) {
+			dev_err(charger->dev,
+				"%s(): Error in writing reg 0x%x\n",
+				__func__, TPS65090_REG_INTR_STS);
+		}
+	}
+
+	if (charger->prev_ac_online != charger->ac_online)
+		power_supply_changed(charger->ac);
+
+	return IRQ_HANDLED;
+}
+
+static struct tps65090_platform_data *
+		tps65090_parse_dt_charger_data(struct platform_device *pdev)
+{
+	struct tps65090_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	unsigned int prop;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n");
+		return NULL;
+	}
+
+	prop = of_property_read_bool(np, "ti,enable-low-current-chrg");
+	pdata->enable_low_current_chrg = prop;
+
+	pdata->irq_base = -1;
+
+	return pdata;
+
+}
+
+static int tps65090_charger_poll_task(void *data)
+{
+	set_freezable();
+
+	while (!kthread_should_stop()) {
+		schedule_timeout_interruptible(POLL_INTERVAL);
+		try_to_freeze();
+		tps65090_charger_isr(-1, data);
+	}
+	return 0;
+}
+
+static const struct power_supply_desc tps65090_charger_desc = {
+	.name			= "tps65090-ac",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.get_property		= tps65090_ac_get_property,
+	.properties		= tps65090_ac_props,
+	.num_properties		= ARRAY_SIZE(tps65090_ac_props),
+};
+
+static int tps65090_charger_probe(struct platform_device *pdev)
+{
+	struct tps65090_charger *cdata;
+	struct tps65090_platform_data *pdata;
+	struct power_supply_config psy_cfg = {};
+	uint8_t status1 = 0;
+	int ret;
+	int irq;
+
+	pdata = dev_get_platdata(pdev->dev.parent);
+
+	if (IS_ENABLED(CONFIG_OF) && !pdata && pdev->dev.of_node)
+		pdata = tps65090_parse_dt_charger_data(pdev);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s():no platform data available\n",
+				__func__);
+		return -ENODEV;
+	}
+
+	cdata = devm_kzalloc(&pdev->dev, sizeof(*cdata), GFP_KERNEL);
+	if (!cdata) {
+		dev_err(&pdev->dev, "failed to allocate memory status\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, cdata);
+
+	cdata->dev			= &pdev->dev;
+	cdata->pdata			= pdata;
+
+	psy_cfg.supplied_to		= pdata->supplied_to;
+	psy_cfg.num_supplicants		= pdata->num_supplicants;
+	psy_cfg.of_node			= pdev->dev.of_node;
+	psy_cfg.drv_data		= cdata;
+
+	cdata->ac = power_supply_register(&pdev->dev, &tps65090_charger_desc,
+			&psy_cfg);
+	if (IS_ERR(cdata->ac)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		return PTR_ERR(cdata->ac);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		irq = -ENXIO;
+	cdata->irq = irq;
+
+	ret = tps65090_config_charger(cdata);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "charger config failed, err %d\n", ret);
+		goto fail_unregister_supply;
+	}
+
+	/* Check for charger presence */
+	ret = tps65090_read(cdata->dev->parent, TPS65090_REG_CG_STATUS1,
+			&status1);
+	if (ret < 0) {
+		dev_err(cdata->dev, "%s(): Error in reading reg 0x%x", __func__,
+			TPS65090_REG_CG_STATUS1);
+		goto fail_unregister_supply;
+	}
+
+	if (status1 != 0) {
+		ret = tps65090_enable_charging(cdata);
+		if (ret < 0) {
+			dev_err(cdata->dev, "error enabling charger\n");
+			goto fail_unregister_supply;
+		}
+		cdata->ac_online = 1;
+		power_supply_changed(cdata->ac);
+	}
+
+	if (irq != -ENXIO) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+			tps65090_charger_isr, IRQF_ONESHOT, "tps65090-charger", cdata);
+		if (ret) {
+			dev_err(cdata->dev,
+				"Unable to register irq %d err %d\n", irq,
+				ret);
+			goto fail_unregister_supply;
+		}
+	} else {
+		cdata->poll_task = kthread_run(tps65090_charger_poll_task,
+					      cdata, "ktps65090charger");
+		cdata->passive_mode = true;
+		if (IS_ERR(cdata->poll_task)) {
+			ret = PTR_ERR(cdata->poll_task);
+			dev_err(cdata->dev,
+				"Unable to run kthread err %d\n", ret);
+			goto fail_unregister_supply;
+		}
+	}
+
+	return 0;
+
+fail_unregister_supply:
+	power_supply_unregister(cdata->ac);
+
+	return ret;
+}
+
+static int tps65090_charger_remove(struct platform_device *pdev)
+{
+	struct tps65090_charger *cdata = platform_get_drvdata(pdev);
+
+	if (cdata->irq == -ENXIO)
+		kthread_stop(cdata->poll_task);
+	power_supply_unregister(cdata->ac);
+
+	return 0;
+}
+
+static const struct of_device_id of_tps65090_charger_match[] = {
+	{ .compatible = "ti,tps65090-charger", },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_tps65090_charger_match);
+
+static struct platform_driver tps65090_charger_driver = {
+	.driver	= {
+		.name	= "tps65090-charger",
+		.of_match_table = of_tps65090_charger_match,
+	},
+	.probe	= tps65090_charger_probe,
+	.remove = tps65090_charger_remove,
+};
+module_platform_driver(tps65090_charger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Syed Rafiuddin <srafiuddin@nvidia.com>");
+MODULE_DESCRIPTION("tps65090 battery charger driver");
diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
new file mode 100644
index 000000000..a4bc9f2a1
--- /dev/null
+++ b/drivers/power/supply/tps65217_charger.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+// Battery charger driver for TI's tps65217
+//
+// Copyright (C) 2015 Collabora Ltd.
+// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+/*
+ * Battery charger driver for TI's tps65217
+ */
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65217.h>
+
+#define CHARGER_STATUS_PRESENT	(TPS65217_STATUS_ACPWR | TPS65217_STATUS_USBPWR)
+#define NUM_CHARGER_IRQS	2
+#define POLL_INTERVAL		(HZ * 2)
+
+struct tps65217_charger {
+	struct tps65217 *tps;
+	struct device *dev;
+	struct power_supply *psy;
+
+	int	online;
+	int	prev_online;
+
+	struct task_struct	*poll_task;
+};
+
+static enum power_supply_property tps65217_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int tps65217_config_charger(struct tps65217_charger *charger)
+{
+	int ret;
+
+	/*
+	 * tps65217 rev. G, p. 31 (see p. 32 for NTC schematic)
+	 *
+	 * The device can be configured to support a 100k NTC (B = 3960) by
+	 * setting the NTC_TYPE bit in register CHGCONFIG1 to 1. However it
+	 * is not recommended to do so. In sleep mode, the charger continues
+	 * charging the battery, but all register values are reset to default
+	 * values. Therefore, the charger would get the wrong temperature
+	 * information. If 100k NTC setting is required, please contact the
+	 * factory.
+	 *
+	 * ATTENTION, conflicting information, from p. 46
+	 *
+	 * NTC TYPE (for battery temperature measurement)
+	 *   0 – 100k (curve 1, B = 3960)
+	 *   1 – 10k  (curve 2, B = 3480) (default on reset)
+	 *
+	 */
+	ret = tps65217_clear_bits(charger->tps, TPS65217_REG_CHGCONFIG1,
+				  TPS65217_CHGCONFIG1_NTC_TYPE,
+				  TPS65217_PROTECT_NONE);
+	if (ret) {
+		dev_err(charger->dev,
+			"failed to set 100k NTC setting: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65217_enable_charging(struct tps65217_charger *charger)
+{
+	int ret;
+
+	/* charger already enabled */
+	if (charger->online)
+		return 0;
+
+	dev_dbg(charger->dev, "%s: enable charging\n", __func__);
+	ret = tps65217_set_bits(charger->tps, TPS65217_REG_CHGCONFIG1,
+				TPS65217_CHGCONFIG1_CHG_EN,
+				TPS65217_CHGCONFIG1_CHG_EN,
+				TPS65217_PROTECT_NONE);
+	if (ret) {
+		dev_err(charger->dev,
+			"%s: Error in writing CHG_EN in reg 0x%x: %d\n",
+			__func__, TPS65217_REG_CHGCONFIG1, ret);
+		return ret;
+	}
+
+	charger->online = 1;
+
+	return 0;
+}
+
+static int tps65217_charger_get_property(struct power_supply *psy,
+					 enum power_supply_property psp,
+					 union power_supply_propval *val)
+{
+	struct tps65217_charger *charger = power_supply_get_drvdata(psy);
+
+	if (psp == POWER_SUPPLY_PROP_ONLINE) {
+		val->intval = charger->online;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static irqreturn_t tps65217_charger_irq(int irq, void *dev)
+{
+	int ret, val;
+	struct tps65217_charger *charger = dev;
+
+	charger->prev_online = charger->online;
+
+	ret = tps65217_reg_read(charger->tps, TPS65217_REG_STATUS, &val);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s: Error in reading reg 0x%x\n",
+			__func__, TPS65217_REG_STATUS);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(charger->dev, "%s: 0x%x\n", __func__, val);
+
+	/* check for charger status bit */
+	if (val & CHARGER_STATUS_PRESENT) {
+		ret = tps65217_enable_charging(charger);
+		if (ret) {
+			dev_err(charger->dev,
+				"failed to enable charger: %d\n", ret);
+			return IRQ_HANDLED;
+		}
+	} else {
+		charger->online = 0;
+	}
+
+	if (charger->prev_online != charger->online)
+		power_supply_changed(charger->psy);
+
+	ret = tps65217_reg_read(charger->tps, TPS65217_REG_CHGCONFIG0, &val);
+	if (ret < 0) {
+		dev_err(charger->dev, "%s: Error in reading reg 0x%x\n",
+			__func__, TPS65217_REG_CHGCONFIG0);
+		return IRQ_HANDLED;
+	}
+
+	if (val & TPS65217_CHGCONFIG0_ACTIVE)
+		dev_dbg(charger->dev, "%s: charger is charging\n", __func__);
+	else
+		dev_dbg(charger->dev,
+			"%s: charger is NOT charging\n", __func__);
+
+	return IRQ_HANDLED;
+}
+
+static int tps65217_charger_poll_task(void *data)
+{
+	set_freezable();
+
+	while (!kthread_should_stop()) {
+		schedule_timeout_interruptible(POLL_INTERVAL);
+		try_to_freeze();
+		tps65217_charger_irq(-1, data);
+	}
+	return 0;
+}
+
+static const struct power_supply_desc tps65217_charger_desc = {
+	.name			= "tps65217-charger",
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+	.get_property		= tps65217_charger_get_property,
+	.properties		= tps65217_charger_props,
+	.num_properties		= ARRAY_SIZE(tps65217_charger_props),
+};
+
+static int tps65217_charger_probe(struct platform_device *pdev)
+{
+	struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+	struct tps65217_charger *charger;
+	struct power_supply_config cfg = {};
+	struct task_struct *poll_task;
+	int irq[NUM_CHARGER_IRQS];
+	int ret;
+	int i;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, charger);
+	charger->tps = tps;
+	charger->dev = &pdev->dev;
+
+	cfg.of_node = pdev->dev.of_node;
+	cfg.drv_data = charger;
+
+	charger->psy = devm_power_supply_register(&pdev->dev,
+						  &tps65217_charger_desc,
+						  &cfg);
+	if (IS_ERR(charger->psy)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		return PTR_ERR(charger->psy);
+	}
+
+	irq[0] = platform_get_irq_byname(pdev, "USB");
+	irq[1] = platform_get_irq_byname(pdev, "AC");
+
+	ret = tps65217_config_charger(charger);
+	if (ret < 0) {
+		dev_err(charger->dev, "charger config failed, err %d\n", ret);
+		return ret;
+	}
+
+	/* Create a polling thread if an interrupt is invalid */
+	if (irq[0] < 0 || irq[1] < 0) {
+		poll_task = kthread_run(tps65217_charger_poll_task,
+					charger, "ktps65217charger");
+		if (IS_ERR(poll_task)) {
+			ret = PTR_ERR(poll_task);
+			dev_err(charger->dev,
+				"Unable to run kthread err %d\n", ret);
+			return ret;
+		}
+
+		charger->poll_task = poll_task;
+		return 0;
+	}
+
+	/* Create IRQ threads for charger interrupts */
+	for (i = 0; i < NUM_CHARGER_IRQS; i++) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL,
+						tps65217_charger_irq,
+						IRQF_ONESHOT, "tps65217-charger",
+						charger);
+		if (ret) {
+			dev_err(charger->dev,
+				"Unable to register irq %d err %d\n", irq[i],
+				ret);
+			return ret;
+		}
+
+		/* Check current state */
+		tps65217_charger_irq(-1, charger);
+	}
+
+	return 0;
+}
+
+static int tps65217_charger_remove(struct platform_device *pdev)
+{
+	struct tps65217_charger *charger = platform_get_drvdata(pdev);
+
+	if (charger->poll_task)
+		kthread_stop(charger->poll_task);
+
+	return 0;
+}
+
+static const struct of_device_id tps65217_charger_match_table[] = {
+	{ .compatible = "ti,tps65217-charger", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tps65217_charger_match_table);
+
+static struct platform_driver tps65217_charger_driver = {
+	.probe	= tps65217_charger_probe,
+	.remove = tps65217_charger_remove,
+	.driver	= {
+		.name	= "tps65217-charger",
+		.of_match_table = of_match_ptr(tps65217_charger_match_table),
+	},
+
+};
+module_platform_driver(tps65217_charger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");
+MODULE_DESCRIPTION("TPS65217 battery charger driver");
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
new file mode 100644
index 000000000..1bc49b2e1
--- /dev/null
+++ b/drivers/power/supply/twl4030_charger.c
@@ -0,0 +1,1150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
+ *
+ * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * based on twl4030_bci_battery.c by TI
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/twl.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+
+#define TWL4030_BCIMDEN		0x00
+#define TWL4030_BCIMDKEY	0x01
+#define TWL4030_BCIMSTATEC	0x02
+#define TWL4030_BCIICHG		0x08
+#define TWL4030_BCIVAC		0x0a
+#define TWL4030_BCIVBUS		0x0c
+#define TWL4030_BCIMFSTS3	0x0F
+#define TWL4030_BCIMFSTS4	0x10
+#define TWL4030_BCICTL1		0x23
+#define TWL4030_BB_CFG		0x12
+#define TWL4030_BCIIREF1	0x27
+#define TWL4030_BCIIREF2	0x28
+#define TWL4030_BCIMFKEY	0x11
+#define TWL4030_BCIMFEN3	0x14
+#define TWL4030_BCIMFTH8	0x1d
+#define TWL4030_BCIMFTH9	0x1e
+#define TWL4030_BCIWDKEY	0x21
+
+#define TWL4030_BCIMFSTS1	0x01
+
+#define TWL4030_BCIAUTOWEN	BIT(5)
+#define TWL4030_CONFIG_DONE	BIT(4)
+#define TWL4030_CVENAC		BIT(2)
+#define TWL4030_BCIAUTOUSB	BIT(1)
+#define TWL4030_BCIAUTOAC	BIT(0)
+#define TWL4030_CGAIN		BIT(5)
+#define TWL4030_USBFASTMCHG	BIT(2)
+#define TWL4030_STS_VBUS	BIT(7)
+#define TWL4030_STS_USB_ID	BIT(2)
+#define TWL4030_BBCHEN		BIT(4)
+#define TWL4030_BBSEL_MASK	0x0c
+#define TWL4030_BBSEL_2V5	0x00
+#define TWL4030_BBSEL_3V0	0x04
+#define TWL4030_BBSEL_3V1	0x08
+#define TWL4030_BBSEL_3V2	0x0c
+#define TWL4030_BBISEL_MASK	0x03
+#define TWL4030_BBISEL_25uA	0x00
+#define TWL4030_BBISEL_150uA	0x01
+#define TWL4030_BBISEL_500uA	0x02
+#define TWL4030_BBISEL_1000uA	0x03
+
+#define TWL4030_BATSTSPCHG	BIT(2)
+#define TWL4030_BATSTSMCHG	BIT(6)
+
+/* BCI interrupts */
+#define TWL4030_WOVF		BIT(0) /* Watchdog overflow */
+#define TWL4030_TMOVF		BIT(1) /* Timer overflow */
+#define TWL4030_ICHGHIGH	BIT(2) /* Battery charge current high */
+#define TWL4030_ICHGLOW		BIT(3) /* Battery cc. low / FSM state change */
+#define TWL4030_ICHGEOC		BIT(4) /* Battery current end-of-charge */
+#define TWL4030_TBATOR2		BIT(5) /* Battery temperature out of range 2 */
+#define TWL4030_TBATOR1		BIT(6) /* Battery temperature out of range 1 */
+#define TWL4030_BATSTS		BIT(7) /* Battery status */
+
+#define TWL4030_VBATLVL		BIT(0) /* VBAT level */
+#define TWL4030_VBATOV		BIT(1) /* VBAT overvoltage */
+#define TWL4030_VBUSOV		BIT(2) /* VBUS overvoltage */
+#define TWL4030_ACCHGOV		BIT(3) /* Ac charger overvoltage */
+
+#define TWL4030_MSTATEC_USB		BIT(4)
+#define TWL4030_MSTATEC_AC		BIT(5)
+#define TWL4030_MSTATEC_MASK		0x0f
+#define TWL4030_MSTATEC_QUICK1		0x02
+#define TWL4030_MSTATEC_QUICK7		0x07
+#define TWL4030_MSTATEC_COMPLETE1	0x0b
+#define TWL4030_MSTATEC_COMPLETE4	0x0e
+
+/*
+ * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+ * then AC is available.
+ */
+static inline int ac_available(struct iio_channel *channel_vac)
+{
+	int val, err;
+
+	if (!channel_vac)
+		return 0;
+
+	err = iio_read_channel_processed(channel_vac, &val);
+	if (err < 0)
+		return 0;
+	return val > 4500;
+}
+
+static bool allow_usb;
+module_param(allow_usb, bool, 0644);
+MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
+
+struct twl4030_bci {
+	struct device		*dev;
+	struct power_supply	*ac;
+	struct power_supply	*usb;
+	struct usb_phy		*transceiver;
+	struct notifier_block	usb_nb;
+	struct work_struct	work;
+	int			irq_chg;
+	int			irq_bci;
+	int			usb_enabled;
+
+	/*
+	 * ichg_* and *_cur values in uA. If any are 'large', we set
+	 * CGAIN to '1' which doubles the range for half the
+	 * precision.
+	 */
+	unsigned int		ichg_eoc, ichg_lo, ichg_hi;
+	unsigned int		usb_cur, ac_cur;
+	struct iio_channel	*channel_vac;
+	bool			ac_is_active;
+	int			usb_mode, ac_mode; /* charging mode requested */
+#define	CHARGE_OFF	0
+#define	CHARGE_AUTO	1
+#define	CHARGE_LINEAR	2
+
+	/* When setting the USB current we slowly increase the
+	 * requested current until target is reached or the voltage
+	 * drops below 4.75V.  In the latter case we step back one
+	 * step.
+	 */
+	unsigned int		usb_cur_target;
+	struct delayed_work	current_worker;
+#define	USB_CUR_STEP	20000	/* 20mA at a time */
+#define	USB_MIN_VOLT	4750000	/* 4.75V */
+#define	USB_CUR_DELAY	msecs_to_jiffies(100)
+#define	USB_MAX_CURRENT	1700000 /* TWL4030 caps at 1.7A */
+
+	unsigned long		event;
+};
+
+/* strings for 'usb_mode' values */
+static const char *modes[] = { "off", "auto", "continuous" };
+
+/*
+ * clear and set bits on an given register on a given module
+ */
+static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg)
+{
+	u8 val = 0;
+	int ret;
+
+	ret = twl_i2c_read_u8(mod_no, &val, reg);
+	if (ret)
+		return ret;
+
+	val &= ~clear;
+	val |= set;
+
+	return twl_i2c_write_u8(mod_no, val, reg);
+}
+
+static int twl4030_bci_read(u8 reg, u8 *val)
+{
+	return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg);
+}
+
+static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
+{
+	return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear,
+			TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
+			TWL4030_PM_MASTER_BOOT_BCI);
+}
+
+static int twl4030bci_read_adc_val(u8 reg)
+{
+	int ret, temp;
+	u8 val;
+
+	/* read MSB */
+	ret = twl4030_bci_read(reg + 1, &val);
+	if (ret)
+		return ret;
+
+	temp = (int)(val & 0x03) << 8;
+
+	/* read LSB */
+	ret = twl4030_bci_read(reg, &val);
+	if (ret)
+		return ret;
+
+	return temp | val;
+}
+
+/*
+ * TI provided formulas:
+ * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
+ * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
+ * Here we use integer approximation of:
+ * CGAIN == 0: val * 1.6618 - 0.85 * 1000
+ * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
+ */
+/*
+ * convert twl register value for currents into uA
+ */
+static int regval2ua(int regval, bool cgain)
+{
+	if (cgain)
+		return (regval * 16618 - 8500 * 1000) / 5;
+	else
+		return (regval * 16618 - 8500 * 1000) / 10;
+}
+
+/*
+ * convert uA currents into twl register value
+ */
+static int ua2regval(int ua, bool cgain)
+{
+	int ret;
+	if (cgain)
+		ua /= 2;
+	ret = (ua * 10 + 8500 * 1000) / 16618;
+	/* rounding problems */
+	if (ret < 512)
+		ret = 512;
+	return ret;
+}
+
+static int twl4030_charger_update_current(struct twl4030_bci *bci)
+{
+	int status;
+	int cur;
+	unsigned reg, cur_reg;
+	u8 bcictl1, oldreg, fullreg;
+	bool cgain = false;
+	u8 boot_bci;
+
+	/*
+	 * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+	 * and AC is enabled, set current for 'ac'
+	 */
+	if (ac_available(bci->channel_vac)) {
+		cur = bci->ac_cur;
+		bci->ac_is_active = true;
+	} else {
+		cur = bci->usb_cur;
+		bci->ac_is_active = false;
+		if (cur > bci->usb_cur_target) {
+			cur = bci->usb_cur_target;
+			bci->usb_cur = cur;
+		}
+		if (cur < bci->usb_cur_target)
+			schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+	}
+
+	/* First, check thresholds and see if cgain is needed */
+	if (bci->ichg_eoc >= 200000)
+		cgain = true;
+	if (bci->ichg_lo >= 400000)
+		cgain = true;
+	if (bci->ichg_hi >= 820000)
+		cgain = true;
+	if (cur > 852000)
+		cgain = true;
+
+	status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+	if (status < 0)
+		return status;
+	if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
+			    TWL4030_PM_MASTER_BOOT_BCI) < 0)
+		boot_bci = 0;
+	boot_bci &= 7;
+
+	if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
+		/* Need to turn for charging while we change the
+		 * CGAIN bit.  Leave it off while everything is
+		 * updated.
+		 */
+		twl4030_clear_set_boot_bci(boot_bci, 0);
+
+	/*
+	 * For ichg_eoc, the hardware only supports reg values matching
+	 * 100XXXX000, and requires the XXXX be stored in the high nibble
+	 * of TWL4030_BCIMFTH8.
+	 */
+	reg = ua2regval(bci->ichg_eoc, cgain);
+	if (reg > 0x278)
+		reg = 0x278;
+	if (reg < 0x200)
+		reg = 0x200;
+	reg = (reg >> 3) & 0xf;
+	fullreg = reg << 4;
+
+	/*
+	 * For ichg_lo, reg value must match 10XXXX0000.
+	 * XXXX is stored in low nibble of TWL4030_BCIMFTH8.
+	 */
+	reg = ua2regval(bci->ichg_lo, cgain);
+	if (reg > 0x2F0)
+		reg = 0x2F0;
+	if (reg < 0x200)
+		reg = 0x200;
+	reg = (reg >> 4) & 0xf;
+	fullreg |= reg;
+
+	/* ichg_eoc and ichg_lo live in same register */
+	status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
+	if (status < 0)
+		return status;
+	if (oldreg != fullreg) {
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 fullreg, TWL4030_BCIMFTH8);
+	}
+
+	/* ichg_hi threshold must be 1XXXX01100 (I think) */
+	reg = ua2regval(bci->ichg_hi, cgain);
+	if (reg > 0x3E0)
+		reg = 0x3E0;
+	if (reg < 0x200)
+		reg = 0x200;
+	fullreg = (reg >> 5) & 0xF;
+	fullreg <<= 4;
+	status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
+	if (status < 0)
+		return status;
+	if ((oldreg & 0xF0) != fullreg) {
+		fullreg |= (oldreg & 0x0F);
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 fullreg, TWL4030_BCIMFTH9);
+	}
+
+	/*
+	 * And finally, set the current.  This is stored in
+	 * two registers.
+	 */
+	reg = ua2regval(cur, cgain);
+	/* we have only 10 bits */
+	if (reg > 0x3ff)
+		reg = 0x3ff;
+	status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
+	if (status < 0)
+		return status;
+	cur_reg = oldreg;
+	status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
+	if (status < 0)
+		return status;
+	cur_reg |= oldreg << 8;
+	if (reg != oldreg) {
+		/* disable write protection for one write access for
+		 * BCIIREF */
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+					  (reg & 0x100) ? 3 : 2,
+					  TWL4030_BCIIREF2);
+		if (status < 0)
+			return status;
+		/* disable write protection for one write access for
+		 * BCIIREF */
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+					  TWL4030_BCIMFKEY);
+		if (status < 0)
+			return status;
+		status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+					  reg & 0xff,
+					  TWL4030_BCIIREF1);
+	}
+	if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
+		/* Flip CGAIN and re-enable charging */
+		bcictl1 ^= TWL4030_CGAIN;
+		twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+				 bcictl1, TWL4030_BCICTL1);
+		twl4030_clear_set_boot_bci(0, boot_bci);
+	}
+	return 0;
+}
+
+static int twl4030_charger_get_current(void);
+
+static void twl4030_current_worker(struct work_struct *data)
+{
+	int v, curr;
+	int res;
+	struct twl4030_bci *bci = container_of(data, struct twl4030_bci,
+					       current_worker.work);
+
+	res = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+	if (res < 0)
+		v = 0;
+	else
+		/* BCIVBUS uses ADCIN8, 7/1023 V/step */
+		v = res * 6843;
+	curr = twl4030_charger_get_current();
+
+	dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr,
+		bci->usb_cur, bci->usb_cur_target);
+
+	if (v < USB_MIN_VOLT) {
+		/* Back up and stop adjusting. */
+		if (bci->usb_cur >= USB_CUR_STEP)
+			bci->usb_cur -= USB_CUR_STEP;
+		bci->usb_cur_target = bci->usb_cur;
+	} else if (bci->usb_cur >= bci->usb_cur_target ||
+		   bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
+		/* Reached target and voltage is OK - stop */
+		return;
+	} else {
+		bci->usb_cur += USB_CUR_STEP;
+		schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+	}
+	twl4030_charger_update_current(bci);
+}
+
+/*
+ * Enable/Disable USB Charge functionality.
+ */
+static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
+{
+	int ret;
+	u32 reg;
+
+	if (bci->usb_mode == CHARGE_OFF)
+		enable = false;
+	if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
+
+		twl4030_charger_update_current(bci);
+
+		/* Need to keep phy powered */
+		if (!bci->usb_enabled) {
+			pm_runtime_get_sync(bci->transceiver->dev);
+			bci->usb_enabled = 1;
+		}
+
+		if (bci->usb_mode == CHARGE_AUTO) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
+					TWL4030_TBATOR2 | TWL4030_TBATOR1 |
+					TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
+			/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
+			ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+		}
+
+		/* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
+		ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
+			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
+		if (bci->usb_mode == CHARGE_LINEAR) {
+			/* Enable interrupts now. */
+			reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
+					TWL4030_TBATOR1 | TWL4030_BATSTS);
+			ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+				       TWL4030_INTERRUPTS_BCIIMR1A);
+			if (ret < 0) {
+				dev_err(bci->dev,
+					"failed to unmask interrupts: %d\n",
+					ret);
+				return ret;
+			}
+			twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
+			/* Watch dog key: WOVF acknowledge */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
+					       TWL4030_BCIWDKEY);
+			/* 0x24 + EKEY6: off mode */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+					       TWL4030_BCIMDKEY);
+			/* EKEY2: Linear charge: USB path */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26,
+					       TWL4030_BCIMDKEY);
+			/* WDKEY5: stop watchdog count */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3,
+					       TWL4030_BCIWDKEY);
+			/* enable MFEN3 access */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c,
+					       TWL4030_BCIMFKEY);
+			 /* ICHGEOCEN - end-of-charge monitor (current < 80mA)
+			  *                      (charging continues)
+			  * ICHGLOWEN - current level monitor (charge continues)
+			  * don't monitor over-current or heat save
+			  */
+			ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0,
+					       TWL4030_BCIMFEN3);
+		}
+	} else {
+		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
+		ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+					TWL4030_BCIMDKEY);
+		if (bci->usb_enabled) {
+			pm_runtime_mark_last_busy(bci->transceiver->dev);
+			pm_runtime_put_autosuspend(bci->transceiver->dev);
+			bci->usb_enabled = 0;
+		}
+		bci->usb_cur = 0;
+	}
+
+	return ret;
+}
+
+/*
+ * Enable/Disable AC Charge funtionality.
+ */
+static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
+{
+	int ret;
+
+	if (bci->ac_mode == CHARGE_OFF)
+		enable = false;
+
+	if (enable)
+		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
+	else
+		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
+
+	return ret;
+}
+
+/*
+ * Enable/Disable charging of Backup Battery.
+ */
+static int twl4030_charger_enable_backup(int uvolt, int uamp)
+{
+	int ret;
+	u8 flags;
+
+	if (uvolt < 2500000 ||
+	    uamp < 25) {
+		/* disable charging of backup battery */
+		ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
+					TWL4030_BBCHEN, 0, TWL4030_BB_CFG);
+		return ret;
+	}
+
+	flags = TWL4030_BBCHEN;
+	if (uvolt >= 3200000)
+		flags |= TWL4030_BBSEL_3V2;
+	else if (uvolt >= 3100000)
+		flags |= TWL4030_BBSEL_3V1;
+	else if (uvolt >= 3000000)
+		flags |= TWL4030_BBSEL_3V0;
+	else
+		flags |= TWL4030_BBSEL_2V5;
+
+	if (uamp >= 1000)
+		flags |= TWL4030_BBISEL_1000uA;
+	else if (uamp >= 500)
+		flags |= TWL4030_BBISEL_500uA;
+	else if (uamp >= 150)
+		flags |= TWL4030_BBISEL_150uA;
+	else
+		flags |= TWL4030_BBISEL_25uA;
+
+	ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
+				TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK,
+				flags,
+				TWL4030_BB_CFG);
+
+	return ret;
+}
+
+/*
+ * TWL4030 CHG_PRES (AC charger presence) events
+ */
+static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
+{
+	struct twl4030_bci *bci = arg;
+
+	dev_dbg(bci->dev, "CHG_PRES irq\n");
+	/* reset current on each 'plug' event */
+	bci->ac_cur = 500000;
+	twl4030_charger_update_current(bci);
+	power_supply_changed(bci->ac);
+	power_supply_changed(bci->usb);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * TWL4030 BCI monitoring events
+ */
+static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
+{
+	struct twl4030_bci *bci = arg;
+	u8 irqs1, irqs2;
+	int ret;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1,
+			      TWL4030_INTERRUPTS_BCIISR1A);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2,
+			      TWL4030_INTERRUPTS_BCIISR2A);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1);
+
+	if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) {
+		/* charger state change, inform the core */
+		power_supply_changed(bci->ac);
+		power_supply_changed(bci->usb);
+	}
+	twl4030_charger_update_current(bci);
+
+	/* various monitoring events, for now we just log them here */
+	if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
+		dev_warn(bci->dev, "battery temperature out of range\n");
+
+	if (irqs1 & TWL4030_BATSTS)
+		dev_crit(bci->dev, "battery disconnected\n");
+
+	if (irqs2 & TWL4030_VBATOV)
+		dev_crit(bci->dev, "VBAT overvoltage\n");
+
+	if (irqs2 & TWL4030_VBUSOV)
+		dev_crit(bci->dev, "VBUS overvoltage\n");
+
+	if (irqs2 & TWL4030_ACCHGOV)
+		dev_crit(bci->dev, "Ac charger overvoltage\n");
+
+	return IRQ_HANDLED;
+}
+
+static void twl4030_bci_usb_work(struct work_struct *data)
+{
+	struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work);
+
+	switch (bci->event) {
+	case USB_EVENT_VBUS:
+	case USB_EVENT_CHARGER:
+		twl4030_charger_enable_usb(bci, true);
+		break;
+	case USB_EVENT_NONE:
+		twl4030_charger_enable_usb(bci, false);
+		break;
+	}
+}
+
+static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
+			       void *priv)
+{
+	struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
+
+	dev_dbg(bci->dev, "OTG notify %lu\n", val);
+
+	/* reset current on each 'plug' event */
+	if (allow_usb)
+		bci->usb_cur_target = 500000;
+	else
+		bci->usb_cur_target = 100000;
+
+	bci->event = val;
+	schedule_work(&bci->work);
+
+	return NOTIFY_OK;
+}
+
+/*
+ * sysfs charger enabled store
+ */
+static ssize_t
+twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t n)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+	int mode;
+	int status;
+
+	mode = sysfs_match_string(modes, buf);
+	if (mode < 0)
+		return mode;
+
+	if (dev == &bci->ac->dev) {
+		if (mode == 2)
+			return -EINVAL;
+		twl4030_charger_enable_ac(bci, false);
+		bci->ac_mode = mode;
+		status = twl4030_charger_enable_ac(bci, true);
+	} else {
+		twl4030_charger_enable_usb(bci, false);
+		bci->usb_mode = mode;
+		status = twl4030_charger_enable_usb(bci, true);
+	}
+	return (status == 0) ? n : status;
+}
+
+/*
+ * sysfs charger enabled show
+ */
+static ssize_t
+twl4030_bci_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+	int len = 0;
+	int i;
+	int mode = bci->usb_mode;
+
+	if (dev == &bci->ac->dev)
+		mode = bci->ac_mode;
+
+	for (i = 0; i < ARRAY_SIZE(modes); i++)
+		if (mode == i)
+			len += scnprintf(buf+len, PAGE_SIZE-len,
+					"[%s] ", modes[i]);
+		else
+			len += scnprintf(buf+len, PAGE_SIZE-len,
+					"%s ", modes[i]);
+	buf[len-1] = '\n';
+	return len;
+}
+static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
+		   twl4030_bci_mode_store);
+
+static int twl4030_charger_get_current(void)
+{
+	int curr;
+	int ret;
+	u8 bcictl1;
+
+	curr = twl4030bci_read_adc_val(TWL4030_BCIICHG);
+	if (curr < 0)
+		return curr;
+
+	ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+	if (ret)
+		return ret;
+
+	return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
+}
+
+/*
+ * Returns the main charge FSM state
+ * Or < 0 on failure.
+ */
+static int twl4030bci_state(struct twl4030_bci *bci)
+{
+	int ret;
+	u8 state;
+
+	ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state);
+	if (ret) {
+		dev_err(bci->dev, "error reading BCIMSTATEC\n");
+		return ret;
+	}
+
+	dev_dbg(bci->dev, "state: %02x\n", state);
+
+	return state;
+}
+
+static int twl4030_bci_state_to_status(int state)
+{
+	state &= TWL4030_MSTATEC_MASK;
+	if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	else if (TWL4030_MSTATEC_COMPLETE1 <= state &&
+					state <= TWL4030_MSTATEC_COMPLETE4)
+		return POWER_SUPPLY_STATUS_FULL;
+	else
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int twl4030_bci_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
+	int is_charging;
+	int state;
+	int ret;
+
+	state = twl4030bci_state(bci);
+	if (state < 0)
+		return state;
+
+	if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+		is_charging = state & TWL4030_MSTATEC_USB;
+	else
+		is_charging = state & TWL4030_MSTATEC_AC;
+	if (!is_charging) {
+		u8 s;
+		ret = twl4030_bci_read(TWL4030_BCIMDEN, &s);
+		if (ret < 0)
+			return ret;
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+			is_charging = s & 1;
+		else
+			is_charging = s & 2;
+		if (is_charging)
+			/* A little white lie */
+			state = TWL4030_MSTATEC_QUICK1;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (is_charging)
+			val->intval = twl4030_bci_state_to_status(state);
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* charging must be active for meaningful result */
+		if (!is_charging)
+			return -ENODATA;
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+			ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+			if (ret < 0)
+				return ret;
+			/* BCIVBUS uses ADCIN8, 7/1023 V/step */
+			val->intval = ret * 6843;
+		} else {
+			ret = twl4030bci_read_adc_val(TWL4030_BCIVAC);
+			if (ret < 0)
+				return ret;
+			/* BCIVAC uses ADCIN11, 10/1023 V/step */
+			val->intval = ret * 9775;
+		}
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		if (!is_charging)
+			return -ENODATA;
+		/* current measurement is shared between AC and USB */
+		ret = twl4030_charger_get_current();
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = is_charging &&
+			twl4030_bci_state_to_status(state) !=
+				POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		val->intval = -1;
+		if (psy->desc->type != POWER_SUPPLY_TYPE_USB) {
+			if (!bci->ac_is_active)
+				val->intval = bci->ac_cur;
+		} else {
+			if (bci->ac_is_active)
+				val->intval = bci->usb_cur_target;
+		}
+		if (val->intval < 0) {
+			u8 bcictl1;
+
+			val->intval = twl4030bci_read_adc_val(TWL4030_BCIIREF1);
+			if (val->intval < 0)
+				return val->intval;
+			ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+			if (ret < 0)
+				return ret;
+			val->intval = regval2ua(val->intval, bcictl1 &
+							TWL4030_CGAIN);
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int twl4030_bci_set_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    const union power_supply_propval *val)
+{
+	struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+			bci->usb_cur_target = val->intval;
+		else
+			bci->ac_cur = val->intval;
+		twl4030_charger_update_current(bci);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int twl4030_bci_property_is_writeable(struct power_supply *psy,
+				      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static enum power_supply_property twl4030_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+#ifdef CONFIG_OF
+static const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct twl4030_bci_platform_data *pdata;
+	u32 num;
+
+	if (!np)
+		return NULL;
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return pdata;
+
+	if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
+		pdata->bb_uvolt = num;
+	if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
+		pdata->bb_uamp = num;
+	return pdata;
+}
+#else
+static inline const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static const struct power_supply_desc twl4030_bci_ac_desc = {
+	.name		= "twl4030_ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= twl4030_charger_props,
+	.num_properties	= ARRAY_SIZE(twl4030_charger_props),
+	.get_property	= twl4030_bci_get_property,
+	.set_property	= twl4030_bci_set_property,
+	.property_is_writeable	= twl4030_bci_property_is_writeable,
+};
+
+static const struct power_supply_desc twl4030_bci_usb_desc = {
+	.name		= "twl4030_usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= twl4030_charger_props,
+	.num_properties	= ARRAY_SIZE(twl4030_charger_props),
+	.get_property	= twl4030_bci_get_property,
+	.set_property	= twl4030_bci_set_property,
+	.property_is_writeable	= twl4030_bci_property_is_writeable,
+};
+
+static int twl4030_bci_probe(struct platform_device *pdev)
+{
+	struct twl4030_bci *bci;
+	const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
+	int ret;
+	u32 reg;
+
+	bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL);
+	if (bci == NULL)
+		return -ENOMEM;
+
+	if (!pdata)
+		pdata = twl4030_bci_parse_dt(&pdev->dev);
+
+	bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
+	bci->ichg_lo = 241000; /* Low threshold */
+	bci->ichg_hi = 500000; /* High threshold */
+	bci->ac_cur = 500000; /* 500mA */
+	if (allow_usb)
+		bci->usb_cur_target = 500000;  /* 500mA */
+	else
+		bci->usb_cur_target = 100000;  /* 100mA */
+	bci->usb_mode = CHARGE_AUTO;
+	bci->ac_mode = CHARGE_AUTO;
+
+	bci->dev = &pdev->dev;
+	bci->irq_chg = platform_get_irq(pdev, 0);
+	bci->irq_bci = platform_get_irq(pdev, 1);
+
+	platform_set_drvdata(pdev, bci);
+
+	INIT_WORK(&bci->work, twl4030_bci_usb_work);
+	INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
+
+	bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
+	if (IS_ERR(bci->channel_vac)) {
+		ret = PTR_ERR(bci->channel_vac);
+		if (ret == -EPROBE_DEFER)
+			return ret;	/* iio not ready */
+		dev_warn(&pdev->dev, "could not request vac iio channel (%d)",
+			ret);
+		bci->channel_vac = NULL;
+	}
+
+	if (bci->dev->of_node) {
+		struct device_node *phynode;
+
+		phynode = of_get_compatible_child(bci->dev->of_node->parent,
+						  "ti,twl4030-usb");
+		if (phynode) {
+			bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+			bci->transceiver = devm_usb_get_phy_by_node(
+				bci->dev, phynode, &bci->usb_nb);
+			of_node_put(phynode);
+			if (IS_ERR(bci->transceiver)) {
+				ret = PTR_ERR(bci->transceiver);
+				if (ret == -EPROBE_DEFER)
+					return ret;	/* phy not ready */
+				dev_warn(&pdev->dev, "could not request transceiver (%d)",
+					ret);
+				bci->transceiver = NULL;
+			}
+		}
+	}
+
+	bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
+					     NULL);
+	if (IS_ERR(bci->ac)) {
+		ret = PTR_ERR(bci->ac);
+		dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
+		return ret;
+	}
+
+	bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
+					      NULL);
+	if (IS_ERR(bci->usb)) {
+		ret = PTR_ERR(bci->usb);
+		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
+			twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
+			bci);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+			bci->irq_chg, ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL,
+			twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+			bci->irq_bci, ret);
+		return ret;
+	}
+
+	/* Enable interrupts now. */
+	reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
+		TWL4030_TBATOR1 | TWL4030_BATSTS);
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+			       TWL4030_INTERRUPTS_BCIIMR1A);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+		return ret;
+	}
+
+	reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
+	ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+			       TWL4030_INTERRUPTS_BCIIMR2A);
+	if (ret < 0)
+		dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+
+	twl4030_charger_update_current(bci);
+	if (device_create_file(&bci->usb->dev, &dev_attr_mode))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+	if (device_create_file(&bci->ac->dev, &dev_attr_mode))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+	twl4030_charger_enable_ac(bci, true);
+	if (!IS_ERR_OR_NULL(bci->transceiver))
+		twl4030_bci_usb_ncb(&bci->usb_nb,
+				    bci->transceiver->last_event,
+				    NULL);
+	else
+		twl4030_charger_enable_usb(bci, false);
+	if (pdata)
+		twl4030_charger_enable_backup(pdata->bb_uvolt,
+					      pdata->bb_uamp);
+	else
+		twl4030_charger_enable_backup(0, 0);
+
+	return 0;
+}
+
+static int twl4030_bci_remove(struct platform_device *pdev)
+{
+	struct twl4030_bci *bci = platform_get_drvdata(pdev);
+
+	twl4030_charger_enable_ac(bci, false);
+	twl4030_charger_enable_usb(bci, false);
+	twl4030_charger_enable_backup(0, 0);
+
+	device_remove_file(&bci->usb->dev, &dev_attr_mode);
+	device_remove_file(&bci->ac->dev, &dev_attr_mode);
+	/* mask interrupts */
+	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+			 TWL4030_INTERRUPTS_BCIIMR1A);
+	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+			 TWL4030_INTERRUPTS_BCIIMR2A);
+
+	return 0;
+}
+
+static const struct of_device_id twl_bci_of_match[] = {
+	{.compatible = "ti,twl4030-bci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, twl_bci_of_match);
+
+static struct platform_driver twl4030_bci_driver = {
+	.probe = twl4030_bci_probe,
+	.remove	= twl4030_bci_remove,
+	.driver	= {
+		.name	= "twl4030_bci",
+		.of_match_table = of_match_ptr(twl_bci_of_match),
+	},
+};
+module_platform_driver(twl4030_bci_driver);
+
+MODULE_AUTHOR("Gražvydas Ignotas");
+MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl4030_bci");
diff --git a/drivers/power/supply/twl4030_madc_battery.c b/drivers/power/supply/twl4030_madc_battery.c
new file mode 100644
index 000000000..48649dcfe
--- /dev/null
+++ b/drivers/power/supply/twl4030_madc_battery.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Dumb driver for LiIon batteries using TWL4030 madc.
+ *
+ * Copyright 2013 Golden Delicious Computers
+ * Lukas Märdian <lukas@goldelico.com>
+ *
+ * Based on dumb driver for gta01 battery
+ * Copyright 2009 Openmoko, Inc
+ * Balaji Rao <balajirrao@openmoko.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/power/twl4030_madc_battery.h>
+#include <linux/iio/consumer.h>
+
+struct twl4030_madc_battery {
+	struct power_supply *psy;
+	struct twl4030_madc_bat_platform_data *pdata;
+	struct iio_channel *channel_temp;
+	struct iio_channel *channel_ichg;
+	struct iio_channel *channel_vbat;
+};
+
+static enum power_supply_property twl4030_madc_bat_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+};
+
+static int madc_read(struct iio_channel *channel)
+{
+	int val, err;
+	err = iio_read_channel_processed(channel, &val);
+	if (err < 0)
+		return err;
+
+	return val;
+}
+
+static int twl4030_madc_bat_get_charging_status(struct twl4030_madc_battery *bt)
+{
+	return (madc_read(bt->channel_ichg) > 0) ? 1 : 0;
+}
+
+static int twl4030_madc_bat_get_voltage(struct twl4030_madc_battery *bt)
+{
+	return madc_read(bt->channel_vbat);
+}
+
+static int twl4030_madc_bat_get_current(struct twl4030_madc_battery *bt)
+{
+	return madc_read(bt->channel_ichg) * 1000;
+}
+
+static int twl4030_madc_bat_get_temp(struct twl4030_madc_battery *bt)
+{
+	return madc_read(bt->channel_temp) * 10;
+}
+
+static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat,
+					int volt)
+{
+	struct twl4030_madc_bat_calibration *calibration;
+	int i, res = 0;
+
+	/* choose charging curve */
+	if (twl4030_madc_bat_get_charging_status(bat))
+		calibration = bat->pdata->charging;
+	else
+		calibration = bat->pdata->discharging;
+
+	if (volt > calibration[0].voltage) {
+		res = calibration[0].level;
+	} else {
+		for (i = 0; calibration[i+1].voltage >= 0; i++) {
+			if (volt <= calibration[i].voltage &&
+					volt >= calibration[i+1].voltage) {
+				/* interval found - interpolate within range */
+				res = calibration[i].level -
+					((calibration[i].voltage - volt) *
+					(calibration[i].level -
+					calibration[i+1].level)) /
+					(calibration[i].voltage -
+					calibration[i+1].voltage);
+				break;
+			}
+		}
+	}
+	return res;
+}
+
+static int twl4030_madc_bat_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct twl4030_madc_battery *bat = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (twl4030_madc_bat_voltscale(bat,
+				twl4030_madc_bat_get_voltage(bat)) > 95)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else {
+			if (twl4030_madc_bat_get_charging_status(bat))
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = twl4030_madc_bat_get_voltage(bat) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = twl4030_madc_bat_get_current(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		/* assume battery is always present */
+		val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW: {
+			int percent = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage(bat));
+			val->intval = (percent * bat->pdata->capacity) / 100;
+			break;
+		}
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage(bat));
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = bat->pdata->capacity;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = twl4030_madc_bat_get_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: {
+			int percent = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage(bat));
+			/* in mAh */
+			int chg = (percent * (bat->pdata->capacity/1000))/100;
+
+			/* assume discharge with 400 mA (ca. 1.5W) */
+			val->intval = (3600l * chg) / 400;
+			break;
+		}
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
+{
+	power_supply_changed(psy);
+}
+
+static const struct power_supply_desc twl4030_madc_bat_desc = {
+	.name			= "twl4030_battery",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= twl4030_madc_bat_props,
+	.num_properties		= ARRAY_SIZE(twl4030_madc_bat_props),
+	.get_property		= twl4030_madc_bat_get_property,
+	.external_power_changed	= twl4030_madc_bat_ext_changed,
+
+};
+
+static int twl4030_cmp(const void *a, const void *b)
+{
+	return ((struct twl4030_madc_bat_calibration *)b)->voltage -
+		((struct twl4030_madc_bat_calibration *)a)->voltage;
+}
+
+static int twl4030_madc_battery_probe(struct platform_device *pdev)
+{
+	struct twl4030_madc_battery *twl4030_madc_bat;
+	struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+	int ret = 0;
+
+	twl4030_madc_bat = devm_kzalloc(&pdev->dev, sizeof(*twl4030_madc_bat),
+				GFP_KERNEL);
+	if (!twl4030_madc_bat)
+		return -ENOMEM;
+
+	twl4030_madc_bat->channel_temp = iio_channel_get(&pdev->dev, "temp");
+	if (IS_ERR(twl4030_madc_bat->channel_temp)) {
+		ret = PTR_ERR(twl4030_madc_bat->channel_temp);
+		goto err;
+	}
+
+	twl4030_madc_bat->channel_ichg = iio_channel_get(&pdev->dev, "ichg");
+	if (IS_ERR(twl4030_madc_bat->channel_ichg)) {
+		ret = PTR_ERR(twl4030_madc_bat->channel_ichg);
+		goto err_temp;
+	}
+
+	twl4030_madc_bat->channel_vbat = iio_channel_get(&pdev->dev, "vbat");
+	if (IS_ERR(twl4030_madc_bat->channel_vbat)) {
+		ret = PTR_ERR(twl4030_madc_bat->channel_vbat);
+		goto err_ichg;
+	}
+
+	/* sort charging and discharging calibration data */
+	sort(pdata->charging, pdata->charging_size,
+		sizeof(struct twl4030_madc_bat_calibration),
+		twl4030_cmp, NULL);
+	sort(pdata->discharging, pdata->discharging_size,
+		sizeof(struct twl4030_madc_bat_calibration),
+		twl4030_cmp, NULL);
+
+	twl4030_madc_bat->pdata = pdata;
+	platform_set_drvdata(pdev, twl4030_madc_bat);
+	psy_cfg.drv_data = twl4030_madc_bat;
+	twl4030_madc_bat->psy = power_supply_register(&pdev->dev,
+						      &twl4030_madc_bat_desc,
+						      &psy_cfg);
+	if (IS_ERR(twl4030_madc_bat->psy)) {
+		ret = PTR_ERR(twl4030_madc_bat->psy);
+		goto err_vbat;
+	}
+
+	return 0;
+
+err_vbat:
+	iio_channel_release(twl4030_madc_bat->channel_vbat);
+err_ichg:
+	iio_channel_release(twl4030_madc_bat->channel_ichg);
+err_temp:
+	iio_channel_release(twl4030_madc_bat->channel_temp);
+err:
+	return ret;
+}
+
+static int twl4030_madc_battery_remove(struct platform_device *pdev)
+{
+	struct twl4030_madc_battery *bat = platform_get_drvdata(pdev);
+
+	power_supply_unregister(bat->psy);
+
+	iio_channel_release(bat->channel_vbat);
+	iio_channel_release(bat->channel_ichg);
+	iio_channel_release(bat->channel_temp);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_madc_battery_driver = {
+	.driver = {
+		.name = "twl4030_madc_battery",
+	},
+	.probe  = twl4030_madc_battery_probe,
+	.remove = twl4030_madc_battery_remove,
+};
+module_platform_driver(twl4030_madc_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>");
+MODULE_DESCRIPTION("twl4030_madc battery driver");
+MODULE_ALIAS("platform:twl4030_madc_battery");
diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c
new file mode 100644
index 000000000..332cb50d9
--- /dev/null
+++ b/drivers/power/supply/ucs1002_power.c
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for UCS1002 Programmable USB Port Power Controller
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+#include <linux/bits.h>
+#include <linux/freezer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/* UCS1002 Registers */
+#define UCS1002_REG_CURRENT_MEASUREMENT	0x00
+
+/*
+ * The Total Accumulated Charge registers store the total accumulated
+ * charge delivered from the VS source to a portable device. The total
+ * value is calculated using four registers, from 01h to 04h. The bit
+ * weighting of the registers is given in mA/hrs.
+ */
+#define UCS1002_REG_TOTAL_ACC_CHARGE	0x01
+
+/* Other Status Register */
+#define UCS1002_REG_OTHER_STATUS	0x0f
+#  define F_ADET_PIN			BIT(4)
+#  define F_CHG_ACT			BIT(3)
+
+/* Interrupt Status */
+#define UCS1002_REG_INTERRUPT_STATUS	0x10
+#  define F_ERR				BIT(7)
+#  define F_DISCHARGE_ERR		BIT(6)
+#  define F_RESET			BIT(5)
+#  define F_MIN_KEEP_OUT		BIT(4)
+#  define F_TSD				BIT(3)
+#  define F_OVER_VOLT			BIT(2)
+#  define F_BACK_VOLT			BIT(1)
+#  define F_OVER_ILIM			BIT(0)
+
+/* Pin Status Register */
+#define UCS1002_REG_PIN_STATUS		0x14
+#  define UCS1002_PWR_STATE_MASK	0x03
+#  define F_PWR_EN_PIN			BIT(6)
+#  define F_M2_PIN			BIT(5)
+#  define F_M1_PIN			BIT(4)
+#  define F_EM_EN_PIN			BIT(3)
+#  define F_SEL_PIN			BIT(2)
+#  define F_ACTIVE_MODE_MASK		GENMASK(5, 3)
+#  define F_ACTIVE_MODE_PASSTHROUGH	F_M2_PIN
+#  define F_ACTIVE_MODE_DEDICATED	F_EM_EN_PIN
+#  define F_ACTIVE_MODE_BC12_DCP	(F_M2_PIN | F_EM_EN_PIN)
+#  define F_ACTIVE_MODE_BC12_SDP	F_M1_PIN
+#  define F_ACTIVE_MODE_BC12_CDP	(F_M1_PIN | F_M2_PIN | F_EM_EN_PIN)
+
+/* General Configuration Register */
+#define UCS1002_REG_GENERAL_CFG		0x15
+#  define F_RATION_EN			BIT(3)
+
+/* Emulation Configuration Register */
+#define UCS1002_REG_EMU_CFG		0x16
+
+/* Switch Configuration Register */
+#define UCS1002_REG_SWITCH_CFG		0x17
+#  define F_PIN_IGNORE			BIT(7)
+#  define F_EM_EN_SET			BIT(5)
+#  define F_M2_SET			BIT(4)
+#  define F_M1_SET			BIT(3)
+#  define F_S0_SET			BIT(2)
+#  define F_PWR_EN_SET			BIT(1)
+#  define F_LATCH_SET			BIT(0)
+#  define V_SET_ACTIVE_MODE_MASK	GENMASK(5, 3)
+#  define V_SET_ACTIVE_MODE_PASSTHROUGH	F_M2_SET
+#  define V_SET_ACTIVE_MODE_DEDICATED	F_EM_EN_SET
+#  define V_SET_ACTIVE_MODE_BC12_DCP	(F_M2_SET | F_EM_EN_SET)
+#  define V_SET_ACTIVE_MODE_BC12_SDP	F_M1_SET
+#  define V_SET_ACTIVE_MODE_BC12_CDP	(F_M1_SET | F_M2_SET | F_EM_EN_SET)
+
+/* Current Limit Register */
+#define UCS1002_REG_ILIMIT		0x19
+#  define UCS1002_ILIM_SW_MASK		GENMASK(3, 0)
+
+/* Product ID */
+#define UCS1002_REG_PRODUCT_ID		0xfd
+#  define UCS1002_PRODUCT_ID		0x4e
+
+/* Manufacture name */
+#define UCS1002_MANUFACTURER		"SMSC"
+
+struct ucs1002_info {
+	struct power_supply *charger;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct regulator_desc *regulator_descriptor;
+	struct regulator_dev *rdev;
+	bool present;
+	bool output_disable;
+	struct delayed_work health_poll;
+	int health;
+
+};
+
+static enum power_supply_property ucs1002_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_PRESENT, /* the presence of PED */
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_USB_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+};
+
+static int ucs1002_get_online(struct ucs1002_info *info,
+			      union power_supply_propval *val)
+{
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &reg);
+	if (ret)
+		return ret;
+
+	val->intval = !!(reg & F_CHG_ACT);
+
+	return 0;
+}
+
+static int ucs1002_get_charge(struct ucs1002_info *info,
+			      union power_supply_propval *val)
+{
+	/*
+	 * To fit within 32 bits some values are rounded (uA/h)
+	 *
+	 * For Total Accumulated Charge Middle Low Byte register, addr
+	 * 03h, byte 2
+	 *
+	 *   B0: 0.01084 mA/h rounded to 11 uA/h
+	 *   B1: 0.02169 mA/h rounded to 22 uA/h
+	 *   B2: 0.04340 mA/h rounded to 43 uA/h
+	 *   B3: 0.08676 mA/h rounded to 87 uA/h
+	 *   B4: 0.17350 mA/h rounded to 173 uÁ/h
+	 *
+	 * For Total Accumulated Charge Low Byte register, addr 04h,
+	 * byte 3
+	 *
+	 *   B6: 0.00271 mA/h rounded to 3 uA/h
+	 *   B7: 0.005422 mA/h rounded to 5 uA/h
+	 */
+	static const int bit_weights_uAh[BITS_PER_TYPE(u32)] = {
+		/*
+		 * Bit corresponding to low byte (offset 0x04)
+		 * B0 B1 B2 B3 B4 B5 B6 B7
+		 */
+		0, 0, 0, 0, 0, 0, 3, 5,
+		/*
+		 * Bit corresponding to middle low byte (offset 0x03)
+		 * B0 B1 B2 B3 B4 B5 B6 B7
+		 */
+		11, 22, 43, 87, 173, 347, 694, 1388,
+		/*
+		 * Bit corresponding to middle high byte (offset 0x02)
+		 * B0 B1 B2 B3 B4 B5 B6 B7
+		 */
+		2776, 5552, 11105, 22210, 44420, 88840, 177700, 355400,
+		/*
+		 * Bit corresponding to high byte (offset 0x01)
+		 * B0 B1 B2 B3 B4 B5 B6 B7
+		 */
+		710700, 1421000, 2843000, 5685000, 11371000, 22742000,
+		45484000, 90968000,
+	};
+	unsigned long total_acc_charger;
+	unsigned int reg;
+	int i, ret;
+
+	ret = regmap_bulk_read(info->regmap, UCS1002_REG_TOTAL_ACC_CHARGE,
+			       &reg, sizeof(u32));
+	if (ret)
+		return ret;
+
+	total_acc_charger = be32_to_cpu(reg); /* BE as per offsets above */
+	val->intval = 0;
+
+	for_each_set_bit(i, &total_acc_charger, ARRAY_SIZE(bit_weights_uAh))
+		val->intval += bit_weights_uAh[i];
+
+	return 0;
+}
+
+static int ucs1002_get_current(struct ucs1002_info *info,
+			       union power_supply_propval *val)
+{
+	/*
+	 * The Current Measurement register stores the measured
+	 * current value delivered to the portable device. The range
+	 * is from 9.76 mA to 2.5 A.
+	 */
+	static const int bit_weights_uA[BITS_PER_TYPE(u8)] = {
+		9760, 19500, 39000, 78100, 156200, 312300, 624600, 1249300,
+	};
+	unsigned long current_measurement;
+	unsigned int reg;
+	int i, ret;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_CURRENT_MEASUREMENT, &reg);
+	if (ret)
+		return ret;
+
+	current_measurement = reg;
+	val->intval = 0;
+
+	for_each_set_bit(i, &current_measurement, ARRAY_SIZE(bit_weights_uA))
+		val->intval += bit_weights_uA[i];
+
+	return 0;
+}
+
+/*
+ * The Current Limit register stores the maximum current used by the
+ * port switch. The range is from 500mA to 2.5 A.
+ */
+static const u32 ucs1002_current_limit_uA[] = {
+	500000, 900000, 1000000, 1200000, 1500000, 1800000, 2000000, 2500000,
+};
+
+static int ucs1002_get_max_current(struct ucs1002_info *info,
+				   union power_supply_propval *val)
+{
+	unsigned int reg;
+	int ret;
+
+	if (info->output_disable) {
+		val->intval = 0;
+		return 0;
+	}
+
+	ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
+	if (ret)
+		return ret;
+
+	val->intval = ucs1002_current_limit_uA[reg & UCS1002_ILIM_SW_MASK];
+
+	return 0;
+}
+
+static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
+{
+	unsigned int reg;
+	int ret, idx;
+
+	if (val == 0) {
+		info->output_disable = true;
+		regulator_disable_regmap(info->rdev);
+		return 0;
+	}
+
+	for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
+		if (val == ucs1002_current_limit_uA[idx])
+			break;
+	}
+
+	if (idx == ARRAY_SIZE(ucs1002_current_limit_uA))
+		return -EINVAL;
+
+	ret = regmap_write(info->regmap, UCS1002_REG_ILIMIT, idx);
+	if (ret)
+		return ret;
+	/*
+	 * Any current limit setting exceeding the one set via ILIM
+	 * pin will be rejected, so we read out freshly changed limit
+	 * to make sure that it took effect.
+	 */
+	ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
+	if (ret)
+		return ret;
+
+	if (reg != idx)
+		return -EINVAL;
+
+	info->output_disable = false;
+
+	if (info->rdev && info->rdev->use_count &&
+	    !regulator_is_enabled_regmap(info->rdev))
+		regulator_enable_regmap(info->rdev);
+
+	return 0;
+}
+
+static enum power_supply_usb_type ucs1002_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+};
+
+static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
+{
+	unsigned int mode;
+
+	if (val < 0 || val >= ARRAY_SIZE(ucs1002_usb_types))
+		return -EINVAL;
+
+	switch (ucs1002_usb_types[val]) {
+	case POWER_SUPPLY_USB_TYPE_PD:
+		mode = V_SET_ACTIVE_MODE_DEDICATED;
+		break;
+	case POWER_SUPPLY_USB_TYPE_SDP:
+		mode = V_SET_ACTIVE_MODE_BC12_SDP;
+		break;
+	case POWER_SUPPLY_USB_TYPE_DCP:
+		mode = V_SET_ACTIVE_MODE_BC12_DCP;
+		break;
+	case POWER_SUPPLY_USB_TYPE_CDP:
+		mode = V_SET_ACTIVE_MODE_BC12_CDP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
+				  V_SET_ACTIVE_MODE_MASK, mode);
+}
+
+static int ucs1002_get_usb_type(struct ucs1002_info *info,
+				union power_supply_propval *val)
+{
+	enum power_supply_usb_type type;
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &reg);
+	if (ret)
+		return ret;
+
+	switch (reg & F_ACTIVE_MODE_MASK) {
+	default:
+		type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		break;
+	case F_ACTIVE_MODE_DEDICATED:
+		type = POWER_SUPPLY_USB_TYPE_PD;
+		break;
+	case F_ACTIVE_MODE_BC12_SDP:
+		type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case F_ACTIVE_MODE_BC12_DCP:
+		type = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	case F_ACTIVE_MODE_BC12_CDP:
+		type = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	}
+
+	val->intval = type;
+
+	return 0;
+}
+
+static int ucs1002_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct ucs1002_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		return ucs1002_get_online(info, val);
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		return ucs1002_get_charge(info, val);
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		return ucs1002_get_current(info, val);
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		return ucs1002_get_max_current(info, val);
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		return ucs1002_get_usb_type(info, val);
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = info->health;
+		return 0;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = info->present;
+		return 0;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = UCS1002_MANUFACTURER;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ucs1002_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct ucs1002_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		return ucs1002_set_max_current(info, val->intval);
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		return ucs1002_set_usb_type(info, val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ucs1002_property_is_writeable(struct power_supply *psy,
+					 enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct power_supply_desc ucs1002_charger_desc = {
+	.name			= "ucs1002",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.usb_types		= ucs1002_usb_types,
+	.num_usb_types		= ARRAY_SIZE(ucs1002_usb_types),
+	.get_property		= ucs1002_get_property,
+	.set_property		= ucs1002_set_property,
+	.property_is_writeable	= ucs1002_property_is_writeable,
+	.properties		= ucs1002_props,
+	.num_properties		= ARRAY_SIZE(ucs1002_props),
+};
+
+static void ucs1002_health_poll(struct work_struct *work)
+{
+	struct ucs1002_info *info = container_of(work, struct ucs1002_info,
+						 health_poll.work);
+	int ret;
+	u32 reg;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, &reg);
+	if (ret)
+		return;
+
+	/* bad health and no status change, just schedule us again in a while */
+	if ((reg & F_ERR) && info->health != POWER_SUPPLY_HEALTH_GOOD) {
+		schedule_delayed_work(&info->health_poll,
+				      msecs_to_jiffies(2000));
+		return;
+	}
+
+	if (reg & F_TSD)
+		info->health = POWER_SUPPLY_HEALTH_OVERHEAT;
+	else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
+		info->health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else if (reg & F_OVER_ILIM)
+		info->health = POWER_SUPPLY_HEALTH_OVERCURRENT;
+	else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
+		info->health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+	else
+		info->health = POWER_SUPPLY_HEALTH_GOOD;
+
+	sysfs_notify(&info->charger->dev.kobj, NULL, "health");
+}
+
+static irqreturn_t ucs1002_charger_irq(int irq, void *data)
+{
+	int ret, regval;
+	bool present;
+	struct ucs1002_info *info = data;
+
+	present = info->present;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &regval);
+	if (ret)
+		return IRQ_HANDLED;
+
+	/* update attached status */
+	info->present = regval & F_ADET_PIN;
+
+	/* notify the change */
+	if (present != info->present)
+		power_supply_changed(info->charger);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ucs1002_alert_irq(int irq, void *data)
+{
+	struct ucs1002_info *info = data;
+
+	mod_delayed_work(system_wq, &info->health_poll, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int ucs1002_regulator_enable(struct regulator_dev *rdev)
+{
+	struct ucs1002_info *info = rdev_get_drvdata(rdev);
+
+	/*
+	 * If the output is disabled due to 0 maximum current, just pretend the
+	 * enable did work. The regulator will be enabled as soon as we get a
+	 * a non-zero maximum current budget.
+	 */
+	if (info->output_disable)
+		return 0;
+
+	return regulator_enable_regmap(rdev);
+}
+
+static const struct regulator_ops ucs1002_regulator_ops = {
+	.is_enabled	= regulator_is_enabled_regmap,
+	.enable		= ucs1002_regulator_enable,
+	.disable	= regulator_disable_regmap,
+};
+
+static const struct regulator_desc ucs1002_regulator_descriptor = {
+	.name		= "ucs1002-vbus",
+	.ops		= &ucs1002_regulator_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_reg	= UCS1002_REG_SWITCH_CFG,
+	.enable_mask	= F_PWR_EN_SET,
+	.enable_val	= F_PWR_EN_SET,
+	.fixed_uV	= 5000000,
+	.n_voltages	= 1,
+};
+
+static int ucs1002_probe(struct i2c_client *client,
+			 const struct i2c_device_id *dev_id)
+{
+	struct device *dev = &client->dev;
+	struct power_supply_config charger_config = {};
+	const struct regmap_config regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+	struct regulator_config regulator_config = {};
+	int irq_a_det, irq_alert, ret;
+	struct ucs1002_info *info;
+	unsigned int regval;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->regmap = devm_regmap_init_i2c(client, &regmap_config);
+	ret = PTR_ERR_OR_ZERO(info->regmap);
+	if (ret) {
+		dev_err(dev, "Regmap initialization failed: %d\n", ret);
+		return ret;
+	}
+
+	info->client = client;
+
+	irq_a_det = of_irq_get_byname(dev->of_node, "a_det");
+	irq_alert = of_irq_get_byname(dev->of_node, "alert");
+
+	charger_config.of_node = dev->of_node;
+	charger_config.drv_data = info;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_PRODUCT_ID, &regval);
+	if (ret) {
+		dev_err(dev, "Failed to read product ID: %d\n", ret);
+		return ret;
+	}
+
+	if (regval != UCS1002_PRODUCT_ID) {
+		dev_err(dev,
+			"Product ID does not match (0x%02x != 0x%02x)\n",
+			regval, UCS1002_PRODUCT_ID);
+		return -ENODEV;
+	}
+
+	/* Enable charge rationing by default */
+	ret = regmap_update_bits(info->regmap, UCS1002_REG_GENERAL_CFG,
+				 F_RATION_EN, F_RATION_EN);
+	if (ret) {
+		dev_err(dev, "Failed to read general config: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Ignore the M1, M2, PWR_EN, and EM_EN pin states. Set active
+	 * mode selection to BC1.2 CDP.
+	 */
+	ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
+				 V_SET_ACTIVE_MODE_MASK | F_PIN_IGNORE,
+				 V_SET_ACTIVE_MODE_BC12_CDP | F_PIN_IGNORE);
+	if (ret) {
+		dev_err(dev, "Failed to configure default mode: %d\n", ret);
+		return ret;
+	}
+	/*
+	 * Be safe and set initial current limit to 500mA
+	 */
+	ret = ucs1002_set_max_current(info, 500000);
+	if (ret) {
+		dev_err(dev, "Failed to set max current default: %d\n", ret);
+		return ret;
+	}
+
+	info->charger = devm_power_supply_register(dev, &ucs1002_charger_desc,
+						   &charger_config);
+	ret = PTR_ERR_OR_ZERO(info->charger);
+	if (ret) {
+		dev_err(dev, "Failed to register power supply: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &regval);
+	if (ret) {
+		dev_err(dev, "Failed to read pin status: %d\n", ret);
+		return ret;
+	}
+
+	info->regulator_descriptor =
+		devm_kmemdup(dev, &ucs1002_regulator_descriptor,
+			     sizeof(ucs1002_regulator_descriptor),
+			     GFP_KERNEL);
+	if (!info->regulator_descriptor)
+		return -ENOMEM;
+
+	info->regulator_descriptor->enable_is_inverted = !(regval & F_SEL_PIN);
+
+	regulator_config.dev = dev;
+	regulator_config.of_node = dev->of_node;
+	regulator_config.regmap = info->regmap;
+	regulator_config.driver_data = info;
+
+	info->rdev = devm_regulator_register(dev, info->regulator_descriptor,
+				       &regulator_config);
+	ret = PTR_ERR_OR_ZERO(info->rdev);
+	if (ret) {
+		dev_err(dev, "Failed to register VBUS regulator: %d\n", ret);
+		return ret;
+	}
+
+	info->health = POWER_SUPPLY_HEALTH_GOOD;
+	INIT_DELAYED_WORK(&info->health_poll, ucs1002_health_poll);
+
+	if (irq_a_det > 0) {
+		ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
+						ucs1002_charger_irq,
+						IRQF_ONESHOT,
+						"ucs1002-a_det", info);
+		if (ret) {
+			dev_err(dev, "Failed to request A_DET threaded irq: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	if (irq_alert > 0) {
+		ret = devm_request_irq(dev, irq_alert, ucs1002_alert_irq,
+				       0,"ucs1002-alert", info);
+		if (ret) {
+			dev_err(dev, "Failed to request ALERT threaded irq: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id ucs1002_of_match[] = {
+	{ .compatible = "microchip,ucs1002", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ucs1002_of_match);
+
+static struct i2c_driver ucs1002_driver = {
+	.driver = {
+		   .name = "ucs1002",
+		   .of_match_table = ucs1002_of_match,
+	},
+	.probe = ucs1002_probe,
+};
+module_i2c_driver(ucs1002_driver);
+
+MODULE_DESCRIPTION("Microchip UCS1002 Programmable USB Port Power Controller");
+MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ug3105_battery.c b/drivers/power/supply/ug3105_battery.c
new file mode 100644
index 000000000..fbc966842
--- /dev/null
+++ b/drivers/power/supply/ug3105_battery.c
@@ -0,0 +1,486 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Battery monitor driver for the uPI uG3105 battery monitor
+ *
+ * Note the uG3105 is not a full-featured autonomous fuel-gauge. Instead it is
+ * expected to be use in combination with some always on microcontroller reading
+ * its coulomb-counter before it can wrap (must be read every 400 seconds!).
+ *
+ * Since Linux does not monitor coulomb-counter changes while the device
+ * is off or suspended, the coulomb counter is not used atm.
+ *
+ * Possible improvements:
+ * 1. Activate commented out total_coulomb_count code
+ * 2. Reset total_coulomb_count val to 0 when the battery is as good as empty
+ *    and remember that we did this (and clear the flag for this on susp/resume)
+ * 3. When the battery is full check if the flag that we set total_coulomb_count
+ *    to when the battery was empty is set. If so we now know the capacity,
+ *    not the design, but actual capacity, of the battery
+ * 4. Add some mechanism (needs userspace help, or maybe use efivar?) to remember
+ *    the actual capacity of the battery over reboots
+ * 5. When we know the actual capacity at probe time, add energy_now and
+ *    energy_full attributes. Guess boot + resume energy_now value based on ocv
+ *    and then use total_coulomb_count to report energy_now over time, resetting
+ *    things to adjust for drift when empty/full. This should give more accurate
+ *    readings, esp. in the 30-70% range and allow userspace to estimate time
+ *    remaining till empty/full
+ * 6. Maybe unregister + reregister the psy device when we learn the actual
+ *    capacity during run-time ?
+ *
+ * The above will also require some sort of mwh_per_unit calculation. Testing
+ * has shown that an estimated 7404mWh increase of the battery's energy results
+ * in a total_coulomb_count increase of 3277 units with a 5 milli-ohm sense R.
+ *
+ * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/workqueue.h>
+
+#define UG3105_MOV_AVG_WINDOW					8
+#define UG3105_INIT_POLL_TIME					(5 * HZ)
+#define UG3105_POLL_TIME					(30 * HZ)
+#define UG3105_SETTLE_TIME					(1 * HZ)
+
+#define UG3105_INIT_POLL_COUNT					30
+
+#define UG3105_REG_MODE						0x00
+#define UG3105_REG_CTRL1					0x01
+#define UG3105_REG_COULOMB_CNT					0x02
+#define UG3105_REG_BAT_VOLT					0x08
+#define UG3105_REG_BAT_CURR					0x0c
+
+#define UG3105_MODE_STANDBY					0x00
+#define UG3105_MODE_RUN						0x10
+
+#define UG3105_CTRL1_RESET_COULOMB_CNT				0x03
+
+#define UG3105_CURR_HYST_UA					65000
+
+#define UG3105_LOW_BAT_UV					3700000
+#define UG3105_FULL_BAT_HYST_UV					38000
+
+struct ug3105_chip {
+	struct i2c_client *client;
+	struct power_supply *psy;
+	struct power_supply_battery_info *info;
+	struct delayed_work work;
+	struct mutex lock;
+	int ocv[UG3105_MOV_AVG_WINDOW];		/* micro-volt */
+	int intern_res[UG3105_MOV_AVG_WINDOW];	/* milli-ohm */
+	int poll_count;
+	int ocv_avg_index;
+	int ocv_avg;				/* micro-volt */
+	int intern_res_poll_count;
+	int intern_res_avg_index;
+	int intern_res_avg;			/* milli-ohm */
+	int volt;				/* micro-volt */
+	int curr;				/* micro-ampere */
+	int total_coulomb_count;
+	int uv_per_unit;
+	int ua_per_unit;
+	int status;
+	int capacity;
+	bool supplied;
+};
+
+static int ug3105_read_word(struct i2c_client *client, u8 reg)
+{
+	int val;
+
+	val = i2c_smbus_read_word_data(client, reg);
+	if (val < 0)
+		dev_err(&client->dev, "Error reading reg 0x%02x\n", reg);
+
+	return val;
+}
+
+static int ug3105_get_status(struct ug3105_chip *chip)
+{
+	int full = chip->info->constant_charge_voltage_max_uv - UG3105_FULL_BAT_HYST_UV;
+
+	if (chip->curr > UG3105_CURR_HYST_UA)
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	if (chip->curr < -UG3105_CURR_HYST_UA)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (chip->supplied && chip->ocv_avg > full)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int ug3105_get_capacity(struct ug3105_chip *chip)
+{
+	/*
+	 * OCV voltages in uV for 0-110% in 5% increments, the 100-110% is
+	 * for LiPo HV (High-Voltage) bateries which can go up to 4.35V
+	 * instead of the usual 4.2V.
+	 */
+	static const int ocv_capacity_tbl[23] = {
+		3350000,
+		3610000,
+		3690000,
+		3710000,
+		3730000,
+		3750000,
+		3770000,
+		3786667,
+		3803333,
+		3820000,
+		3836667,
+		3853333,
+		3870000,
+		3907500,
+		3945000,
+		3982500,
+		4020000,
+		4075000,
+		4110000,
+		4150000,
+		4200000,
+		4250000,
+		4300000,
+	};
+	int i, ocv_diff, ocv_step;
+
+	if (chip->ocv_avg < ocv_capacity_tbl[0])
+		return 0;
+
+	if (chip->status == POWER_SUPPLY_STATUS_FULL)
+		return 100;
+
+	for (i = 1; i < ARRAY_SIZE(ocv_capacity_tbl); i++) {
+		if (chip->ocv_avg > ocv_capacity_tbl[i])
+			continue;
+
+		ocv_diff = ocv_capacity_tbl[i] - chip->ocv_avg;
+		ocv_step = ocv_capacity_tbl[i] - ocv_capacity_tbl[i - 1];
+		/* scale 0-110% down to 0-100% for LiPo HV */
+		if (chip->info->constant_charge_voltage_max_uv >= 4300000)
+			return (i * 500 - ocv_diff * 500 / ocv_step) / 110;
+		else
+			return i * 5 - ocv_diff * 5 / ocv_step;
+	}
+
+	return 100;
+}
+
+static void ug3105_work(struct work_struct *work)
+{
+	struct ug3105_chip *chip = container_of(work, struct ug3105_chip,
+						work.work);
+	int i, val, curr_diff, volt_diff, res, win_size;
+	bool prev_supplied = chip->supplied;
+	int prev_status = chip->status;
+	int prev_volt = chip->volt;
+	int prev_curr = chip->curr;
+	struct power_supply *psy;
+
+	mutex_lock(&chip->lock);
+
+	psy = chip->psy;
+	if (!psy)
+		goto out;
+
+	val = ug3105_read_word(chip->client, UG3105_REG_BAT_VOLT);
+	if (val < 0)
+		goto out;
+	chip->volt = val * chip->uv_per_unit;
+
+	val = ug3105_read_word(chip->client, UG3105_REG_BAT_CURR);
+	if (val < 0)
+		goto out;
+	chip->curr = (s16)val * chip->ua_per_unit;
+
+	chip->ocv[chip->ocv_avg_index] =
+		chip->volt - chip->curr * chip->intern_res_avg / 1000;
+	chip->ocv_avg_index = (chip->ocv_avg_index + 1) % UG3105_MOV_AVG_WINDOW;
+	chip->poll_count++;
+
+	/*
+	 * See possible improvements comment above.
+	 *
+	 * Read + reset coulomb counter every 10 polls (every 300 seconds)
+	 * if ((chip->poll_count % 10) == 0) {
+	 *	val = ug3105_read_word(chip->client, UG3105_REG_COULOMB_CNT);
+	 *	if (val < 0)
+	 *		goto out;
+	 *
+	 *	i2c_smbus_write_byte_data(chip->client, UG3105_REG_CTRL1,
+	 *				  UG3105_CTRL1_RESET_COULOMB_CNT);
+	 *
+	 *	chip->total_coulomb_count += (s16)val;
+	 *	dev_dbg(&chip->client->dev, "coulomb count %d total %d\n",
+	 *		(s16)val, chip->total_coulomb_count);
+	 * }
+	 */
+
+	chip->ocv_avg = 0;
+	win_size = min(chip->poll_count, UG3105_MOV_AVG_WINDOW);
+	for (i = 0; i < win_size; i++)
+		chip->ocv_avg += chip->ocv[i];
+	chip->ocv_avg /= win_size;
+
+	chip->supplied = power_supply_am_i_supplied(psy);
+	chip->status = ug3105_get_status(chip);
+	chip->capacity = ug3105_get_capacity(chip);
+
+	/*
+	 * Skip internal resistance calc on charger [un]plug and
+	 * when the battery is almost empty (voltage low).
+	 */
+	if (chip->supplied != prev_supplied ||
+	    chip->volt < UG3105_LOW_BAT_UV ||
+	    chip->poll_count < 2)
+		goto out;
+
+	/*
+	 * Assuming that the OCV voltage does not change significantly
+	 * between 2 polls, then we can calculate the internal resistance
+	 * on a significant current change by attributing all voltage
+	 * change between the 2 readings to the internal resistance.
+	 */
+	curr_diff = abs(chip->curr - prev_curr);
+	if (curr_diff < UG3105_CURR_HYST_UA)
+		goto out;
+
+	volt_diff = abs(chip->volt - prev_volt);
+	res = volt_diff * 1000 / curr_diff;
+
+	if ((res < (chip->intern_res_avg * 2 / 3)) ||
+	    (res > (chip->intern_res_avg * 4 / 3))) {
+		dev_dbg(&chip->client->dev, "Ignoring outlier internal resistance %d mOhm\n", res);
+		goto out;
+	}
+
+	dev_dbg(&chip->client->dev, "Internal resistance %d mOhm\n", res);
+
+	chip->intern_res[chip->intern_res_avg_index] = res;
+	chip->intern_res_avg_index = (chip->intern_res_avg_index + 1) % UG3105_MOV_AVG_WINDOW;
+	chip->intern_res_poll_count++;
+
+	chip->intern_res_avg = 0;
+	win_size = min(chip->intern_res_poll_count, UG3105_MOV_AVG_WINDOW);
+	for (i = 0; i < win_size; i++)
+		chip->intern_res_avg += chip->intern_res[i];
+	chip->intern_res_avg /= win_size;
+
+out:
+	mutex_unlock(&chip->lock);
+
+	queue_delayed_work(system_wq, &chip->work,
+			   (chip->poll_count <= UG3105_INIT_POLL_COUNT) ?
+					UG3105_INIT_POLL_TIME : UG3105_POLL_TIME);
+
+	if (chip->status != prev_status && psy)
+		power_supply_changed(psy);
+}
+
+static enum power_supply_property ug3105_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_OCV,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int ug3105_get_property(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct ug3105_chip *chip = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+
+	if (!chip->psy) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = chip->status;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = chip->info->technology;
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ug3105_read_word(chip->client, UG3105_REG_BAT_VOLT);
+		if (ret < 0)
+			break;
+		val->intval = ret * chip->uv_per_unit;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+		val->intval = chip->ocv_avg;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ug3105_read_word(chip->client, UG3105_REG_BAT_CURR);
+		if (ret < 0)
+			break;
+		val->intval = (s16)ret * chip->ua_per_unit;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = chip->capacity;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static void ug3105_external_power_changed(struct power_supply *psy)
+{
+	struct ug3105_chip *chip = power_supply_get_drvdata(psy);
+
+	dev_dbg(&chip->client->dev, "external power changed\n");
+	mod_delayed_work(system_wq, &chip->work, UG3105_SETTLE_TIME);
+}
+
+static const struct power_supply_desc ug3105_psy_desc = {
+	.name		= "ug3105_battery",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= ug3105_get_property,
+	.external_power_changed	= ug3105_external_power_changed,
+	.properties	= ug3105_battery_props,
+	.num_properties	= ARRAY_SIZE(ug3105_battery_props),
+};
+
+static void ug3105_init(struct ug3105_chip *chip)
+{
+	chip->poll_count = 0;
+	chip->ocv_avg_index = 0;
+	chip->total_coulomb_count = 0;
+	i2c_smbus_write_byte_data(chip->client, UG3105_REG_MODE,
+				  UG3105_MODE_RUN);
+	i2c_smbus_write_byte_data(chip->client, UG3105_REG_CTRL1,
+				  UG3105_CTRL1_RESET_COULOMB_CNT);
+	queue_delayed_work(system_wq, &chip->work, 0);
+	flush_delayed_work(&chip->work);
+}
+
+static int ug3105_probe(struct i2c_client *client)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = &client->dev;
+	u32 curr_sense_res_uohm = 10000;
+	struct power_supply *psy;
+	struct ug3105_chip *chip;
+	int ret;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	mutex_init(&chip->lock);
+	ret = devm_delayed_work_autocancel(dev, &chip->work, ug3105_work);
+	if (ret)
+		return ret;
+
+	psy_cfg.drv_data = chip;
+	psy = devm_power_supply_register(dev, &ug3105_psy_desc, &psy_cfg);
+	if (IS_ERR(psy))
+		return PTR_ERR(psy);
+
+	ret = power_supply_get_battery_info(psy, &chip->info);
+	if (ret)
+		return ret;
+
+	if (chip->info->factory_internal_resistance_uohm == -EINVAL ||
+	    chip->info->constant_charge_voltage_max_uv == -EINVAL) {
+		dev_err(dev, "error required properties are missing\n");
+		return -ENODEV;
+	}
+
+	device_property_read_u32(dev, "upisemi,rsns-microohm", &curr_sense_res_uohm);
+
+	/*
+	 * DAC maximum is 4.5V divided by 65536 steps + an unknown factor of 10
+	 * coming from somewhere for some reason (verified with a volt-meter).
+	 */
+	chip->uv_per_unit = 45000000/65536;
+	/* Datasheet says 8.1 uV per unit for the current ADC */
+	chip->ua_per_unit = 8100000 / curr_sense_res_uohm;
+
+	/* Use provided internal resistance as start point (in milli-ohm) */
+	chip->intern_res_avg = chip->info->factory_internal_resistance_uohm / 1000;
+	/* Also add it to the internal resistance moving average window */
+	chip->intern_res[0] = chip->intern_res_avg;
+	chip->intern_res_avg_index = 1;
+	chip->intern_res_poll_count = 1;
+
+	mutex_lock(&chip->lock);
+	chip->psy = psy;
+	mutex_unlock(&chip->lock);
+
+	ug3105_init(chip);
+
+	i2c_set_clientdata(client, chip);
+	return 0;
+}
+
+static int __maybe_unused ug3105_suspend(struct device *dev)
+{
+	struct ug3105_chip *chip = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&chip->work);
+	i2c_smbus_write_byte_data(chip->client, UG3105_REG_MODE,
+				  UG3105_MODE_STANDBY);
+
+	return 0;
+}
+
+static int __maybe_unused ug3105_resume(struct device *dev)
+{
+	struct ug3105_chip *chip = dev_get_drvdata(dev);
+
+	ug3105_init(chip);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ug3105_pm_ops, ug3105_suspend,
+			ug3105_resume);
+
+static const struct i2c_device_id ug3105_id[] = {
+	{ "ug3105" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ug3105_id);
+
+static struct i2c_driver ug3105_i2c_driver = {
+	.driver	= {
+		.name = "ug3105",
+		.pm = &ug3105_pm_ops,
+	},
+	.probe_new = ug3105_probe,
+	.id_table = ug3105_id,
+};
+module_i2c_driver(ug3105_i2c_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com");
+MODULE_DESCRIPTION("uPI uG3105 battery monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/wilco-charger.c b/drivers/power/supply/wilco-charger.c
new file mode 100644
index 000000000..98ade073e
--- /dev/null
+++ b/drivers/power/supply/wilco-charger.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Charging control driver for the Wilco EC
+ *
+ * Copyright 2019 Google LLC
+ *
+ * See Documentation/ABI/testing/sysfs-class-power and
+ * Documentation/ABI/testing/sysfs-class-power-wilco for userspace interface
+ * and other info.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/power_supply.h>
+
+#define DRV_NAME "wilco-charger"
+
+/* Property IDs and related EC constants */
+#define PID_CHARGE_MODE		0x0710
+#define PID_CHARGE_LOWER_LIMIT	0x0711
+#define PID_CHARGE_UPPER_LIMIT	0x0712
+
+enum charge_mode {
+	CHARGE_MODE_STD = 1,	/* Used for Standard */
+	CHARGE_MODE_EXP = 2,	/* Express Charge, used for Fast */
+	CHARGE_MODE_AC = 3,	/* Mostly AC use, used for Trickle */
+	CHARGE_MODE_AUTO = 4,	/* Used for Adaptive */
+	CHARGE_MODE_CUSTOM = 5,	/* Used for Custom */
+	CHARGE_MODE_LONGLIFE = 6, /* Used for Long Life */
+};
+
+#define CHARGE_LOWER_LIMIT_MIN	50
+#define CHARGE_LOWER_LIMIT_MAX	95
+#define CHARGE_UPPER_LIMIT_MIN	55
+#define CHARGE_UPPER_LIMIT_MAX	100
+
+/* Convert from POWER_SUPPLY_PROP_CHARGE_TYPE value to the EC's charge mode */
+static int psp_val_to_charge_mode(int psp_val)
+{
+	switch (psp_val) {
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		return CHARGE_MODE_AC;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		return CHARGE_MODE_EXP;
+	case POWER_SUPPLY_CHARGE_TYPE_STANDARD:
+		return CHARGE_MODE_STD;
+	case POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE:
+		return CHARGE_MODE_AUTO;
+	case POWER_SUPPLY_CHARGE_TYPE_CUSTOM:
+		return CHARGE_MODE_CUSTOM;
+	case POWER_SUPPLY_CHARGE_TYPE_LONGLIFE:
+		return CHARGE_MODE_LONGLIFE;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Convert from EC's charge mode to POWER_SUPPLY_PROP_CHARGE_TYPE value */
+static int charge_mode_to_psp_val(enum charge_mode mode)
+{
+	switch (mode) {
+	case CHARGE_MODE_AC:
+		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	case CHARGE_MODE_EXP:
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+	case CHARGE_MODE_STD:
+		return POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+	case CHARGE_MODE_AUTO:
+		return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE;
+	case CHARGE_MODE_CUSTOM:
+		return POWER_SUPPLY_CHARGE_TYPE_CUSTOM;
+	case CHARGE_MODE_LONGLIFE:
+		return POWER_SUPPLY_CHARGE_TYPE_LONGLIFE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static enum power_supply_property wilco_charge_props[] = {
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD,
+	POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD,
+};
+
+static int wilco_charge_get_property(struct power_supply *psy,
+				     enum power_supply_property psp,
+				     union power_supply_propval *val)
+{
+	struct wilco_ec_device *ec = power_supply_get_drvdata(psy);
+	u32 property_id;
+	int ret;
+	u8 raw;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		property_id = PID_CHARGE_MODE;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+		property_id = PID_CHARGE_LOWER_LIMIT;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+		property_id = PID_CHARGE_UPPER_LIMIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = wilco_ec_get_byte_property(ec, property_id, &raw);
+	if (ret < 0)
+		return ret;
+	if (property_id == PID_CHARGE_MODE) {
+		ret = charge_mode_to_psp_val(raw);
+		if (ret < 0)
+			return -EBADMSG;
+		raw = ret;
+	}
+	val->intval = raw;
+
+	return 0;
+}
+
+static int wilco_charge_set_property(struct power_supply *psy,
+				     enum power_supply_property psp,
+				     const union power_supply_propval *val)
+{
+	struct wilco_ec_device *ec = power_supply_get_drvdata(psy);
+	int mode;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		mode = psp_val_to_charge_mode(val->intval);
+		if (mode < 0)
+			return -EINVAL;
+		return wilco_ec_set_byte_property(ec, PID_CHARGE_MODE, mode);
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+		if (val->intval < CHARGE_LOWER_LIMIT_MIN ||
+		    val->intval > CHARGE_LOWER_LIMIT_MAX)
+			return -EINVAL;
+		return wilco_ec_set_byte_property(ec, PID_CHARGE_LOWER_LIMIT,
+						  val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+		if (val->intval < CHARGE_UPPER_LIMIT_MIN ||
+		    val->intval > CHARGE_UPPER_LIMIT_MAX)
+			return -EINVAL;
+		return wilco_ec_set_byte_property(ec, PID_CHARGE_UPPER_LIMIT,
+						  val->intval);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int wilco_charge_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	return 1;
+}
+
+static const struct power_supply_desc wilco_ps_desc = {
+	.properties		= wilco_charge_props,
+	.num_properties		= ARRAY_SIZE(wilco_charge_props),
+	.get_property		= wilco_charge_get_property,
+	.set_property		= wilco_charge_set_property,
+	.property_is_writeable	= wilco_charge_property_is_writeable,
+	.name			= DRV_NAME,
+	.type			= POWER_SUPPLY_TYPE_MAINS,
+};
+
+static int wilco_charge_probe(struct platform_device *pdev)
+{
+	struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+	struct power_supply_config psy_cfg = {};
+	struct power_supply *psy;
+
+	psy_cfg.drv_data = ec;
+	psy = devm_power_supply_register(&pdev->dev, &wilco_ps_desc, &psy_cfg);
+
+	return PTR_ERR_OR_ZERO(psy);
+}
+
+static struct platform_driver wilco_charge_driver = {
+	.probe	= wilco_charge_probe,
+	.driver = {
+		.name = DRV_NAME,
+	}
+};
+module_platform_driver(wilco_charge_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Wilco EC charge control driver");
diff --git a/drivers/power/supply/wm831x_backup.c b/drivers/power/supply/wm831x_backup.c
new file mode 100644
index 000000000..ffb265b85
--- /dev/null
+++ b/drivers/power/supply/wm831x_backup.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backup battery driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_backup {
+	struct wm831x *wm831x;
+	struct power_supply *backup;
+	struct power_supply_desc backup_desc;
+	char name[20];
+};
+
+static int wm831x_backup_read_voltage(struct wm831x *wm831x,
+				     enum wm831x_auxadc src,
+				     union power_supply_propval *val)
+{
+	int ret;
+
+	ret = wm831x_auxadc_read_uv(wm831x, src);
+	if (ret >= 0)
+		val->intval = ret;
+
+	return ret;
+}
+
+/*********************************************************************
+ *		Backup supply properties
+ *********************************************************************/
+
+static void wm831x_config_backup(struct wm831x *wm831x)
+{
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_backup_pdata *pdata;
+	int ret, reg;
+
+	if (!wm831x_pdata || !wm831x_pdata->backup) {
+		dev_warn(wm831x->dev,
+			 "No backup battery charger configuration\n");
+		return;
+	}
+
+	pdata = wm831x_pdata->backup;
+
+	reg = 0;
+
+	if (pdata->charger_enable)
+		reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
+	if (pdata->no_constant_voltage)
+		reg |= WM831X_BKUP_CHG_MODE;
+
+	switch (pdata->vlim) {
+	case 2500:
+		break;
+	case 3100:
+		reg |= WM831X_BKUP_CHG_VLIM;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
+			pdata->vlim);
+	}
+
+	switch (pdata->ilim) {
+	case 100:
+		break;
+	case 200:
+		reg |= 1;
+		break;
+	case 300:
+		reg |= 2;
+		break;
+	case 400:
+		reg |= 3;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
+			pdata->ilim);
+	}
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
+			      WM831X_BKUP_CHG_ENA_MASK |
+			      WM831X_BKUP_CHG_MODE_MASK |
+			      WM831X_BKUP_BATT_DET_ENA_MASK |
+			      WM831X_BKUP_CHG_VLIM_MASK |
+			      WM831X_BKUP_CHG_ILIM_MASK,
+			      reg);
+	if (ret != 0)
+		dev_err(wm831x->dev,
+			"Failed to set backup charger config: %d\n", ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_backup_get_prop(struct power_supply *psy,
+				  enum power_supply_property psp,
+				  union power_supply_propval *val)
+{
+	struct wm831x_backup *devdata = dev_get_drvdata(psy->dev.parent);
+	struct wm831x *wm831x = devdata->wm831x;
+	int ret = 0;
+
+	ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
+	if (ret < 0)
+		return ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (ret & WM831X_BKUP_CHG_STS)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_backup_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
+						val);
+		break;
+
+	case POWER_SUPPLY_PROP_PRESENT:
+		if (ret & WM831X_BKUP_CHG_STS)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_backup_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static int wm831x_backup_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_backup *devdata;
+
+	devdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_backup),
+				GFP_KERNEL);
+	if (devdata == NULL)
+		return -ENOMEM;
+
+	devdata->wm831x = wm831x;
+	platform_set_drvdata(pdev, devdata);
+
+	/* We ignore configuration failures since we can still read
+	 * back the status without enabling the charger (which may
+	 * already be enabled anyway).
+	 */
+	wm831x_config_backup(wm831x);
+
+	if (wm831x_pdata && wm831x_pdata->wm831x_num)
+		snprintf(devdata->name, sizeof(devdata->name),
+			 "wm831x-backup.%d", wm831x_pdata->wm831x_num);
+	else
+		snprintf(devdata->name, sizeof(devdata->name),
+			 "wm831x-backup");
+
+	devdata->backup_desc.name = devdata->name;
+	devdata->backup_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+	devdata->backup_desc.properties = wm831x_backup_props;
+	devdata->backup_desc.num_properties = ARRAY_SIZE(wm831x_backup_props);
+	devdata->backup_desc.get_property = wm831x_backup_get_prop;
+	devdata->backup = power_supply_register(&pdev->dev,
+						&devdata->backup_desc, NULL);
+
+	return PTR_ERR_OR_ZERO(devdata->backup);
+}
+
+static int wm831x_backup_remove(struct platform_device *pdev)
+{
+	struct wm831x_backup *devdata = platform_get_drvdata(pdev);
+
+	power_supply_unregister(devdata->backup);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_backup_driver = {
+	.probe = wm831x_backup_probe,
+	.remove = wm831x_backup_remove,
+	.driver = {
+		.name = "wm831x-backup",
+	},
+};
+
+module_platform_driver(wm831x_backup_driver);
+
+MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backup");
diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
new file mode 100644
index 000000000..82e31066c
--- /dev/null
+++ b/drivers/power/supply/wm831x_power.c
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PMU driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/usb/phy.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_power {
+	struct wm831x *wm831x;
+	struct power_supply *wall;
+	struct power_supply *usb;
+	struct power_supply *battery;
+	struct power_supply_desc wall_desc;
+	struct power_supply_desc usb_desc;
+	struct power_supply_desc battery_desc;
+	char wall_name[20];
+	char usb_name[20];
+	char battery_name[20];
+	bool have_battery;
+	struct usb_phy *usb_phy;
+	struct notifier_block usb_notify;
+};
+
+static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
+				     union power_supply_propval *val)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & supply)
+		val->intval = 1;
+	else
+		val->intval = 0;
+
+	return 0;
+}
+
+static int wm831x_power_read_voltage(struct wm831x *wm831x,
+				     enum wm831x_auxadc src,
+				     union power_supply_propval *val)
+{
+	int ret;
+
+	ret = wm831x_auxadc_read_uv(wm831x, src);
+	if (ret >= 0)
+		val->intval = ret;
+
+	return ret;
+}
+
+/*********************************************************************
+ *		WALL Power
+ *********************************************************************/
+static int wm831x_wall_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_wall_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ *		USB Power
+ *********************************************************************/
+static int wm831x_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+	0,
+	2,
+	100,
+	500,
+	900,
+	1500,
+	1800,
+	550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+				   unsigned long limit, void *data)
+{
+	struct wm831x_power *wm831x_power = container_of(nb,
+							 struct wm831x_power,
+							 usb_notify);
+	unsigned int i, best;
+
+	/* Find the highest supported limit */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+		if (limit >= wm831x_usb_limits[i] &&
+		    wm831x_usb_limits[best] < wm831x_usb_limits[i])
+			best = i;
+	}
+
+	dev_dbg(wm831x_power->wm831x->dev,
+		"Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+	wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+		        WM831X_USB_ILIM_MASK, best);
+
+	return 0;
+}
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+struct chg_map {
+	int val;
+	int reg_val;
+};
+
+static struct chg_map trickle_ilims[] = {
+	{  50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
+	{ 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
+};
+
+static struct chg_map vsels[] = {
+	{ 4050, 0 << WM831X_CHG_VSEL_SHIFT },
+	{ 4100, 1 << WM831X_CHG_VSEL_SHIFT },
+	{ 4150, 2 << WM831X_CHG_VSEL_SHIFT },
+	{ 4200, 3 << WM831X_CHG_VSEL_SHIFT },
+};
+
+static struct chg_map fast_ilims[] = {
+	{    0,  0 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{   50,  1 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  100,  2 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  150,  3 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  200,  4 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  250,  5 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  300,  6 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  350,  7 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  400,  8 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  450,  9 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{  900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
+	{ 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
+};
+
+static struct chg_map eoc_iterms[] = {
+	{ 20, 0 << WM831X_CHG_ITERM_SHIFT },
+	{ 30, 1 << WM831X_CHG_ITERM_SHIFT },
+	{ 40, 2 << WM831X_CHG_ITERM_SHIFT },
+	{ 50, 3 << WM831X_CHG_ITERM_SHIFT },
+	{ 60, 4 << WM831X_CHG_ITERM_SHIFT },
+	{ 70, 5 << WM831X_CHG_ITERM_SHIFT },
+	{ 80, 6 << WM831X_CHG_ITERM_SHIFT },
+	{ 90, 7 << WM831X_CHG_ITERM_SHIFT },
+};
+
+static struct chg_map chg_times[] = {
+	{  60,  0 << WM831X_CHG_TIME_SHIFT },
+	{  90,  1 << WM831X_CHG_TIME_SHIFT },
+	{ 120,  2 << WM831X_CHG_TIME_SHIFT },
+	{ 150,  3 << WM831X_CHG_TIME_SHIFT },
+	{ 180,  4 << WM831X_CHG_TIME_SHIFT },
+	{ 210,  5 << WM831X_CHG_TIME_SHIFT },
+	{ 240,  6 << WM831X_CHG_TIME_SHIFT },
+	{ 270,  7 << WM831X_CHG_TIME_SHIFT },
+	{ 300,  8 << WM831X_CHG_TIME_SHIFT },
+	{ 330,  9 << WM831X_CHG_TIME_SHIFT },
+	{ 360, 10 << WM831X_CHG_TIME_SHIFT },
+	{ 390, 11 << WM831X_CHG_TIME_SHIFT },
+	{ 420, 12 << WM831X_CHG_TIME_SHIFT },
+	{ 450, 13 << WM831X_CHG_TIME_SHIFT },
+	{ 480, 14 << WM831X_CHG_TIME_SHIFT },
+	{ 510, 15 << WM831X_CHG_TIME_SHIFT },
+};
+
+static void wm831x_battery_apply_config(struct wm831x *wm831x,
+				       struct chg_map *map, int count, int val,
+				       int *reg, const char *name,
+				       const char *units)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		if (val == map[i].val)
+			break;
+	if (i == count) {
+		dev_err(wm831x->dev, "Invalid %s %d%s\n",
+			name, val, units);
+	} else {
+		*reg |= map[i].reg_val;
+		dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
+	}
+}
+
+static void wm831x_config_battery(struct wm831x *wm831x)
+{
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_battery_pdata *pdata;
+	int ret, reg1, reg2;
+
+	if (!wm831x_pdata || !wm831x_pdata->battery) {
+		dev_warn(wm831x->dev,
+			 "No battery charger configuration\n");
+		return;
+	}
+
+	pdata = wm831x_pdata->battery;
+
+	reg1 = 0;
+	reg2 = 0;
+
+	if (!pdata->enable) {
+		dev_info(wm831x->dev, "Battery charger disabled\n");
+		return;
+	}
+
+	reg1 |= WM831X_CHG_ENA;
+	if (pdata->off_mask)
+		reg2 |= WM831X_CHG_OFF_MSK;
+	if (pdata->fast_enable)
+		reg1 |= WM831X_CHG_FAST;
+
+	wm831x_battery_apply_config(wm831x, trickle_ilims,
+				   ARRAY_SIZE(trickle_ilims),
+				   pdata->trickle_ilim, &reg2,
+				   "trickle charge current limit", "mA");
+
+	wm831x_battery_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
+				   pdata->vsel, &reg2,
+				   "target voltage", "mV");
+
+	wm831x_battery_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
+				   pdata->fast_ilim, &reg2,
+				   "fast charge current limit", "mA");
+
+	wm831x_battery_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
+				   pdata->eoc_iterm, &reg1,
+				   "end of charge current threshold", "mA");
+
+	wm831x_battery_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
+				   pdata->timeout, &reg2,
+				   "charger timeout", "min");
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
+			      WM831X_CHG_ENA_MASK |
+			      WM831X_CHG_FAST_MASK |
+			      WM831X_CHG_ITERM_MASK,
+			      reg1);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
+			ret);
+
+	ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
+			      WM831X_CHG_OFF_MSK |
+			      WM831X_CHG_TIME_MASK |
+			      WM831X_CHG_FAST_ILIM_MASK |
+			      WM831X_CHG_TRKL_ILIM_MASK |
+			      WM831X_CHG_VSEL_MASK,
+			      reg2);
+	if (ret != 0)
+		dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
+			ret);
+
+	wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & WM831X_PWR_SRC_BATT) {
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+		return 0;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_OFF:
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case WM831X_CHG_STATE_TRICKLE:
+	case WM831X_CHG_STATE_FAST:
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+
+	default:
+		*status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_TRICKLE:
+	case WM831X_CHG_STATE_TRICKLE_OT:
+		*type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case WM831X_CHG_STATE_FAST:
+	case WM831X_CHG_STATE_FAST_OT:
+		*type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	default:
+		*type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
+{
+	int ret;
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & WM831X_BATT_HOT_STS) {
+		*health = POWER_SUPPLY_HEALTH_OVERHEAT;
+		return 0;
+	}
+
+	if (ret & WM831X_BATT_COLD_STS) {
+		*health = POWER_SUPPLY_HEALTH_COLD;
+		return 0;
+	}
+
+	if (ret & WM831X_BATT_OV_STS) {
+		*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		return 0;
+	}
+
+	switch (ret & WM831X_CHG_STATE_MASK) {
+	case WM831X_CHG_STATE_TRICKLE_OT:
+	case WM831X_CHG_STATE_FAST_OT:
+		*health = POWER_SUPPLY_HEALTH_OVERHEAT;
+		break;
+	case WM831X_CHG_STATE_DEFECTIVE:
+		*health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		break;
+	default:
+		*health = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	}
+
+	return 0;
+}
+
+static int wm831x_bat_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = wm831x_bat_check_status(wm831x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
+						val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = wm831x_bat_check_health(wm831x, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = wm831x_bat_check_type(wm831x, &val->intval);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm831x_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const char *wm831x_bat_irqs[] = {
+	"BATT HOT",
+	"BATT COLD",
+	"BATT FAIL",
+	"OV",
+	"END",
+	"TO",
+	"MODE",
+	"START",
+};
+
+static irqreturn_t wm831x_bat_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
+
+	/* The battery charger is autonomous so we don't need to do
+	 * anything except kick user space */
+	if (wm831x_power->have_battery)
+		power_supply_changed(wm831x_power->battery);
+
+	return IRQ_HANDLED;
+}
+
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static irqreturn_t wm831x_syslo_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	/* Not much we can actually *do* but tell people for
+	 * posterity, we're probably about to run out of power. */
+	dev_crit(wm831x->dev, "SYSVDD under voltage\n");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
+{
+	struct wm831x_power *wm831x_power = data;
+	struct wm831x *wm831x = wm831x_power->wm831x;
+
+	dev_dbg(wm831x->dev, "Power source changed\n");
+
+	/* Just notify for everything - little harm in overnotifying. */
+	if (wm831x_power->have_battery)
+		power_supply_changed(wm831x_power->battery);
+	power_supply_changed(wm831x_power->usb);
+	power_supply_changed(wm831x_power->wall);
+
+	return IRQ_HANDLED;
+}
+
+static int wm831x_power_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+	struct wm831x_power *power;
+	int ret, irq, i;
+
+	power = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_power),
+			     GFP_KERNEL);
+	if (power == NULL)
+		return -ENOMEM;
+
+	power->wm831x = wm831x;
+	platform_set_drvdata(pdev, power);
+
+	if (wm831x_pdata && wm831x_pdata->wm831x_num) {
+		snprintf(power->wall_name, sizeof(power->wall_name),
+			 "wm831x-wall.%d", wm831x_pdata->wm831x_num);
+		snprintf(power->battery_name, sizeof(power->wall_name),
+			 "wm831x-battery.%d", wm831x_pdata->wm831x_num);
+		snprintf(power->usb_name, sizeof(power->wall_name),
+			 "wm831x-usb.%d", wm831x_pdata->wm831x_num);
+	} else {
+		snprintf(power->wall_name, sizeof(power->wall_name),
+			 "wm831x-wall");
+		snprintf(power->battery_name, sizeof(power->wall_name),
+			 "wm831x-battery");
+		snprintf(power->usb_name, sizeof(power->wall_name),
+			 "wm831x-usb");
+	}
+
+	/* We ignore configuration failures since we can still read back
+	 * the status without enabling the charger.
+	 */
+	wm831x_config_battery(wm831x);
+
+	power->wall_desc.name = power->wall_name;
+	power->wall_desc.type = POWER_SUPPLY_TYPE_MAINS;
+	power->wall_desc.properties = wm831x_wall_props;
+	power->wall_desc.num_properties = ARRAY_SIZE(wm831x_wall_props);
+	power->wall_desc.get_property = wm831x_wall_get_prop;
+	power->wall = power_supply_register(&pdev->dev, &power->wall_desc,
+					    NULL);
+	if (IS_ERR(power->wall)) {
+		ret = PTR_ERR(power->wall);
+		goto err;
+	}
+
+	power->usb_desc.name = power->usb_name,
+	power->usb_desc.type = POWER_SUPPLY_TYPE_USB;
+	power->usb_desc.properties = wm831x_usb_props;
+	power->usb_desc.num_properties = ARRAY_SIZE(wm831x_usb_props);
+	power->usb_desc.get_property = wm831x_usb_get_prop;
+	power->usb = power_supply_register(&pdev->dev, &power->usb_desc, NULL);
+	if (IS_ERR(power->usb)) {
+		ret = PTR_ERR(power->usb);
+		goto err_wall;
+	}
+
+	ret = wm831x_reg_read(wm831x, WM831X_CHARGER_CONTROL_1);
+	if (ret < 0)
+		goto err_wall;
+	power->have_battery = ret & WM831X_CHG_ENA;
+
+	if (power->have_battery) {
+		power->battery_desc.name = power->battery_name;
+		power->battery_desc.properties = wm831x_bat_props;
+		power->battery_desc.num_properties = ARRAY_SIZE(wm831x_bat_props);
+		power->battery_desc.get_property = wm831x_bat_get_prop;
+		power->battery_desc.use_for_apm = 1;
+		power->battery = power_supply_register(&pdev->dev,
+						       &power->battery_desc,
+						       NULL);
+		if (IS_ERR(power->battery)) {
+			ret = PTR_ERR(power->battery);
+			goto err_usb;
+		}
+	}
+
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+	ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq,
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT, "System power low",
+				   power);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
+			irq, ret);
+		goto err_battery;
+	}
+
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+	ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq,
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT, "Power source",
+				   power);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
+			irq, ret);
+		goto err_syslo;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+		irq = wm831x_irq(wm831x,
+				 platform_get_irq_byname(pdev,
+							 wm831x_bat_irqs[i]));
+		ret = request_threaded_irq(irq, NULL, wm831x_bat_irq,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   wm831x_bat_irqs[i],
+					   power);
+		if (ret != 0) {
+			dev_err(&pdev->dev,
+				"Failed to request %s IRQ %d: %d\n",
+				wm831x_bat_irqs[i], irq, ret);
+			goto err_bat_irq;
+		}
+	}
+
+	power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
+	ret = PTR_ERR_OR_ZERO(power->usb_phy);
+
+	switch (ret) {
+	case 0:
+		power->usb_notify.notifier_call = wm831x_usb_limit_change;
+		ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to register notifier: %d\n",
+				ret);
+			goto err_bat_irq;
+		}
+		break;
+	case -EINVAL:
+	case -ENODEV:
+		/* ignore missing usb-phy, it's optional */
+		power->usb_phy = NULL;
+		ret = 0;
+		break;
+	default:
+		dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+		fallthrough;
+	case -EPROBE_DEFER:
+		goto err_bat_irq;
+	}
+
+	return ret;
+
+err_bat_irq:
+	--i;
+	for (; i >= 0; i--) {
+		irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+		free_irq(irq, power);
+	}
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+	free_irq(irq, power);
+err_syslo:
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+	free_irq(irq, power);
+err_battery:
+	if (power->have_battery)
+		power_supply_unregister(power->battery);
+err_usb:
+	power_supply_unregister(power->usb);
+err_wall:
+	power_supply_unregister(power->wall);
+err:
+	return ret;
+}
+
+static int wm831x_power_remove(struct platform_device *pdev)
+{
+	struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
+	struct wm831x *wm831x = wm831x_power->wm831x;
+	int irq, i;
+
+	if (wm831x_power->usb_phy) {
+		usb_unregister_notifier(wm831x_power->usb_phy,
+					&wm831x_power->usb_notify);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+		irq = wm831x_irq(wm831x, 
+				 platform_get_irq_byname(pdev,
+							 wm831x_bat_irqs[i]));
+		free_irq(irq, wm831x_power);
+	}
+
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+	free_irq(irq, wm831x_power);
+
+	irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+	free_irq(irq, wm831x_power);
+
+	if (wm831x_power->have_battery)
+		power_supply_unregister(wm831x_power->battery);
+	power_supply_unregister(wm831x_power->wall);
+	power_supply_unregister(wm831x_power->usb);
+	return 0;
+}
+
+static struct platform_driver wm831x_power_driver = {
+	.probe = wm831x_power_probe,
+	.remove = wm831x_power_remove,
+	.driver = {
+		.name = "wm831x-power",
+	},
+};
+
+module_platform_driver(wm831x_power_driver);
+
+MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-power");
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
new file mode 100644
index 000000000..908cfd45d
--- /dev/null
+++ b/drivers/power/supply/wm8350_power.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for wm8350 PMIC
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Based on OLPC Battery Driver
+ *
+ * Copyright 2006  David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/wm8350/supply.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/comparator.h>
+
+static int wm8350_read_battery_uvolts(struct wm8350 *wm8350)
+{
+	return wm8350_read_auxadc(wm8350, WM8350_AUXADC_BATT, 0, 0)
+		* WM8350_AUX_COEFF;
+}
+
+static int wm8350_read_line_uvolts(struct wm8350 *wm8350)
+{
+	return wm8350_read_auxadc(wm8350, WM8350_AUXADC_LINE, 0, 0)
+		* WM8350_AUX_COEFF;
+}
+
+static int wm8350_read_usb_uvolts(struct wm8350 *wm8350)
+{
+	return wm8350_read_auxadc(wm8350, WM8350_AUXADC_USB, 0, 0)
+		* WM8350_AUX_COEFF;
+}
+
+#define WM8350_BATT_SUPPLY	1
+#define WM8350_USB_SUPPLY	2
+#define WM8350_LINE_SUPPLY	4
+
+static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min)
+{
+	if (!wm8350->power.rev_g_coeff)
+		return (((min - 30) / 15) & 0xf) << 8;
+	else
+		return (((min - 30) / 30) & 0xf) << 8;
+}
+
+static int wm8350_get_supplies(struct wm8350 *wm8350)
+{
+	u16 sm, ov, co, chrg;
+	int supplies = 0;
+
+	sm = wm8350_reg_read(wm8350, WM8350_STATE_MACHINE_STATUS);
+	ov = wm8350_reg_read(wm8350, WM8350_MISC_OVERRIDES);
+	co = wm8350_reg_read(wm8350, WM8350_COMPARATOR_OVERRIDES);
+	chrg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2);
+
+	/* USB_SM */
+	sm = (sm & WM8350_USB_SM_MASK) >> WM8350_USB_SM_SHIFT;
+
+	/* CHG_ISEL */
+	chrg &= WM8350_CHG_ISEL_MASK;
+
+	/* If the USB state machine is active then we're using that with or
+	 * without battery, otherwise check for wall supply */
+	if (((sm == WM8350_USB_SM_100_SLV) ||
+	     (sm == WM8350_USB_SM_500_SLV) ||
+	     (sm == WM8350_USB_SM_STDBY_SLV))
+	    && !(ov & WM8350_USB_LIMIT_OVRDE))
+		supplies = WM8350_USB_SUPPLY;
+	else if (((sm == WM8350_USB_SM_100_SLV) ||
+		  (sm == WM8350_USB_SM_500_SLV) ||
+		  (sm == WM8350_USB_SM_STDBY_SLV))
+		 && (ov & WM8350_USB_LIMIT_OVRDE) && (chrg == 0))
+		supplies = WM8350_USB_SUPPLY | WM8350_BATT_SUPPLY;
+	else if (co & WM8350_WALL_FB_OVRDE)
+		supplies = WM8350_LINE_SUPPLY;
+	else
+		supplies = WM8350_BATT_SUPPLY;
+
+	return supplies;
+}
+
+static int wm8350_charger_config(struct wm8350 *wm8350,
+				 struct wm8350_charger_policy *policy)
+{
+	u16 reg, eoc_mA, fast_limit_mA;
+
+	if (!policy) {
+		dev_warn(wm8350->dev,
+			 "No charger policy, charger not configured.\n");
+		return -EINVAL;
+	}
+
+	/* make sure USB fast charge current is not > 500mA */
+	if (policy->fast_limit_USB_mA > 500) {
+		dev_err(wm8350->dev, "USB fast charge > 500mA\n");
+		return -EINVAL;
+	}
+
+	eoc_mA = WM8350_CHG_EOC_mA(policy->eoc_mA);
+
+	wm8350_reg_unlock(wm8350);
+
+	reg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1)
+		& WM8350_CHG_ENA_R168;
+	wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1,
+			 reg | eoc_mA | policy->trickle_start_mV |
+			 WM8350_CHG_TRICKLE_TEMP_CHOKE |
+			 WM8350_CHG_TRICKLE_USB_CHOKE |
+			 WM8350_CHG_FAST_USB_THROTTLE);
+
+	if (wm8350_get_supplies(wm8350) & WM8350_USB_SUPPLY) {
+		fast_limit_mA =
+			WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_USB_mA);
+		wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
+			    policy->charge_mV | policy->trickle_charge_USB_mA |
+			    fast_limit_mA | wm8350_charge_time_min(wm8350,
+						policy->charge_timeout));
+
+	} else {
+		fast_limit_mA =
+			WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_mA);
+		wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
+			    policy->charge_mV | policy->trickle_charge_mA |
+			    fast_limit_mA | wm8350_charge_time_min(wm8350,
+						policy->charge_timeout));
+	}
+
+	wm8350_reg_lock(wm8350);
+	return 0;
+}
+
+static int wm8350_batt_status(struct wm8350 *wm8350)
+{
+	u16 state;
+
+	state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2);
+	state &= WM8350_CHG_STS_MASK;
+
+	switch (state) {
+	case WM8350_CHG_STS_OFF:
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	case WM8350_CHG_STS_TRICKLE:
+	case WM8350_CHG_STS_FAST:
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	default:
+		return POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+}
+
+static ssize_t charger_state_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(dev);
+	char *charge;
+	int state;
+
+	state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+	    WM8350_CHG_STS_MASK;
+	switch (state) {
+	case WM8350_CHG_STS_OFF:
+		charge = "Charger Off";
+		break;
+	case WM8350_CHG_STS_TRICKLE:
+		charge = "Trickle Charging";
+		break;
+	case WM8350_CHG_STS_FAST:
+		charge = "Fast Charging";
+		break;
+	default:
+		return 0;
+	}
+
+	return sprintf(buf, "%s\n", charge);
+}
+
+static DEVICE_ATTR_RO(charger_state);
+
+static irqreturn_t wm8350_charger_handler(int irq, void *data)
+{
+	struct wm8350 *wm8350 = data;
+	struct wm8350_power *power = &wm8350->power;
+	struct wm8350_charger_policy *policy = power->policy;
+
+	switch (irq - wm8350->irq_base) {
+	case WM8350_IRQ_CHG_BAT_FAIL:
+		dev_err(wm8350->dev, "battery failed\n");
+		break;
+	case WM8350_IRQ_CHG_TO:
+		dev_err(wm8350->dev, "charger timeout\n");
+		power_supply_changed(power->battery);
+		break;
+
+	case WM8350_IRQ_CHG_BAT_HOT:
+	case WM8350_IRQ_CHG_BAT_COLD:
+	case WM8350_IRQ_CHG_START:
+	case WM8350_IRQ_CHG_END:
+		power_supply_changed(power->battery);
+		break;
+
+	case WM8350_IRQ_CHG_FAST_RDY:
+		dev_dbg(wm8350->dev, "fast charger ready\n");
+		wm8350_charger_config(wm8350, policy);
+		wm8350_reg_unlock(wm8350);
+		wm8350_set_bits(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1,
+				WM8350_CHG_FAST);
+		wm8350_reg_lock(wm8350);
+		break;
+
+	case WM8350_IRQ_CHG_VBATT_LT_3P9:
+		dev_warn(wm8350->dev, "battery < 3.9V\n");
+		break;
+	case WM8350_IRQ_CHG_VBATT_LT_3P1:
+		dev_warn(wm8350->dev, "battery < 3.1V\n");
+		break;
+	case WM8350_IRQ_CHG_VBATT_LT_2P85:
+		dev_warn(wm8350->dev, "battery < 2.85V\n");
+		break;
+
+		/* Supply change.  We will overnotify but it should do
+		 * no harm. */
+	case WM8350_IRQ_EXT_USB_FB:
+	case WM8350_IRQ_EXT_WALL_FB:
+		wm8350_charger_config(wm8350, policy);
+		fallthrough;
+	case WM8350_IRQ_EXT_BAT_FB:
+		power_supply_changed(power->battery);
+		power_supply_changed(power->usb);
+		power_supply_changed(power->ac);
+		break;
+
+	default:
+		dev_err(wm8350->dev, "Unknown interrupt %d\n", irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*********************************************************************
+ *		AC Power
+ *********************************************************************/
+static int wm8350_ac_get_prop(struct power_supply *psy,
+			      enum power_supply_property psp,
+			      union power_supply_propval *val)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(wm8350_get_supplies(wm8350) &
+				 WM8350_LINE_SUPPLY);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = wm8350_read_line_uvolts(wm8350);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property wm8350_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ *		USB Power
+ *********************************************************************/
+static int wm8350_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(wm8350_get_supplies(wm8350) &
+				 WM8350_USB_SUPPLY);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = wm8350_read_usb_uvolts(wm8350);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property wm8350_usb_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+static int wm8350_bat_check_health(struct wm8350 *wm8350)
+{
+	u16 reg;
+
+	if (wm8350_read_battery_uvolts(wm8350) < 2850000)
+		return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+
+	reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES);
+	if (reg & WM8350_CHG_BATT_HOT_OVRDE)
+		return POWER_SUPPLY_HEALTH_OVERHEAT;
+
+	if (reg & WM8350_CHG_BATT_COLD_OVRDE)
+		return POWER_SUPPLY_HEALTH_COLD;
+
+	return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
+{
+	int state;
+
+	state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+	    WM8350_CHG_STS_MASK;
+	switch (state) {
+	case WM8350_CHG_STS_OFF:
+		return POWER_SUPPLY_CHARGE_TYPE_NONE;
+	case WM8350_CHG_STS_TRICKLE:
+		return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+	case WM8350_CHG_STS_FAST:
+		return POWER_SUPPLY_CHARGE_TYPE_FAST;
+	default:
+		return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+	}
+}
+
+static int wm8350_bat_get_property(struct power_supply *psy,
+				   enum power_supply_property psp,
+				   union power_supply_propval *val)
+{
+	struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = wm8350_batt_status(wm8350);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = !!(wm8350_get_supplies(wm8350) &
+				 WM8350_BATT_SUPPLY);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = wm8350_read_battery_uvolts(wm8350);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = wm8350_bat_check_health(wm8350);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		val->intval = wm8350_bat_get_charge_type(wm8350);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property wm8350_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const struct power_supply_desc wm8350_ac_desc = {
+	.name		= "wm8350-ac",
+	.type		= POWER_SUPPLY_TYPE_MAINS,
+	.properties	= wm8350_ac_props,
+	.num_properties	= ARRAY_SIZE(wm8350_ac_props),
+	.get_property	= wm8350_ac_get_prop,
+};
+
+static const struct power_supply_desc wm8350_battery_desc = {
+	.name		= "wm8350-battery",
+	.properties	= wm8350_bat_props,
+	.num_properties	= ARRAY_SIZE(wm8350_bat_props),
+	.get_property	= wm8350_bat_get_property,
+	.use_for_apm	= 1,
+};
+
+static const struct power_supply_desc wm8350_usb_desc = {
+	.name		= "wm8350-usb",
+	.type		= POWER_SUPPLY_TYPE_USB,
+	.properties	= wm8350_usb_props,
+	.num_properties	= ARRAY_SIZE(wm8350_usb_props),
+	.get_property	= wm8350_usb_get_prop,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static int wm8350_init_charger(struct wm8350 *wm8350)
+{
+	int ret;
+
+	/* register our interest in charger events */
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+			    wm8350_charger_handler, 0, "Battery hot", wm8350);
+	if (ret)
+		goto err;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+			    wm8350_charger_handler, 0, "Battery cold", wm8350);
+	if (ret)
+		goto free_chg_bat_hot;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+			    wm8350_charger_handler, 0, "Battery fail", wm8350);
+	if (ret)
+		goto free_chg_bat_cold;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+			    wm8350_charger_handler, 0,
+			    "Charger timeout", wm8350);
+	if (ret)
+		goto free_chg_bat_fail;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+			    wm8350_charger_handler, 0,
+			    "Charge end", wm8350);
+	if (ret)
+		goto free_chg_to;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+			    wm8350_charger_handler, 0,
+			    "Charge start", wm8350);
+	if (ret)
+		goto free_chg_end;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+			    wm8350_charger_handler, 0,
+			    "Fast charge ready", wm8350);
+	if (ret)
+		goto free_chg_start;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+			    wm8350_charger_handler, 0,
+			    "Battery <3.9V", wm8350);
+	if (ret)
+		goto free_chg_fast_rdy;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+			    wm8350_charger_handler, 0,
+			    "Battery <3.1V", wm8350);
+	if (ret)
+		goto free_chg_vbatt_lt_3p9;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+			    wm8350_charger_handler, 0,
+			    "Battery <2.85V", wm8350);
+	if (ret)
+		goto free_chg_vbatt_lt_3p1;
+
+	/* and supply change events */
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+			    wm8350_charger_handler, 0, "USB", wm8350);
+	if (ret)
+		goto free_chg_vbatt_lt_2p85;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+			    wm8350_charger_handler, 0, "Wall", wm8350);
+	if (ret)
+		goto free_ext_usb_fb;
+
+	ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+			    wm8350_charger_handler, 0, "Battery", wm8350);
+	if (ret)
+		goto free_ext_wall_fb;
+
+	return 0;
+
+free_ext_wall_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+	return ret;
+}
+
+static void free_charger_irq(struct wm8350 *wm8350)
+{
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+	wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350);
+}
+
+static int wm8350_power_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	struct wm8350_power *power = &wm8350->power;
+	struct wm8350_charger_policy *policy = power->policy;
+	int ret;
+
+	power->ac = power_supply_register(&pdev->dev, &wm8350_ac_desc, NULL);
+	if (IS_ERR(power->ac))
+		return PTR_ERR(power->ac);
+
+	power->battery = power_supply_register(&pdev->dev, &wm8350_battery_desc,
+					       NULL);
+	if (IS_ERR(power->battery)) {
+		ret = PTR_ERR(power->battery);
+		goto battery_failed;
+	}
+
+	power->usb = power_supply_register(&pdev->dev, &wm8350_usb_desc, NULL);
+	if (IS_ERR(power->usb)) {
+		ret = PTR_ERR(power->usb);
+		goto usb_failed;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_charger_state);
+	if (ret < 0)
+		dev_warn(wm8350->dev, "failed to add charge sysfs: %d\n", ret);
+	ret = 0;
+
+	wm8350_init_charger(wm8350);
+	if (wm8350_charger_config(wm8350, policy) == 0) {
+		wm8350_reg_unlock(wm8350);
+		wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CHG_ENA);
+		wm8350_reg_lock(wm8350);
+	}
+
+	return ret;
+
+usb_failed:
+	power_supply_unregister(power->battery);
+battery_failed:
+	power_supply_unregister(power->ac);
+
+	return ret;
+}
+
+static int wm8350_power_remove(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+	struct wm8350_power *power = &wm8350->power;
+
+	free_charger_irq(wm8350);
+	device_remove_file(&pdev->dev, &dev_attr_charger_state);
+	power_supply_unregister(power->battery);
+	power_supply_unregister(power->ac);
+	power_supply_unregister(power->usb);
+	return 0;
+}
+
+static struct platform_driver wm8350_power_driver = {
+	.probe = wm8350_power_probe,
+	.remove = wm8350_power_remove,
+	.driver = {
+		.name = "wm8350-power",
+	},
+};
+
+module_platform_driver(wm8350_power_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for WM8350");
+MODULE_ALIAS("platform:wm8350-power");
diff --git a/drivers/power/supply/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c
new file mode 100644
index 000000000..a0e1eaa25
--- /dev/null
+++ b/drivers/power/supply/wm97xx_battery.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery measurement code for WM97xx
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+static struct work_struct bat_work;
+static struct gpio_desc *charge_gpiod;
+static DEFINE_MUTEX(work_lock);
+static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+static enum power_supply_property *prop;
+
+static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
+{
+	struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev.parent),
+					pdata->batt_aux) * pdata->batt_mult /
+					pdata->batt_div;
+}
+
+static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
+{
+	struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+	return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev.parent),
+					pdata->temp_aux) * pdata->temp_mult /
+					pdata->temp_div;
+}
+
+static int wm97xx_bat_get_property(struct power_supply *bat_ps,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat_status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = pdata->batt_tech;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (pdata->batt_aux >= 0)
+			val->intval = wm97xx_read_bat(bat_ps);
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (pdata->temp_aux >= 0)
+			val->intval = wm97xx_read_temp(bat_ps);
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (pdata->max_voltage >= 0)
+			val->intval = pdata->max_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		if (pdata->min_voltage >= 0)
+			val->intval = pdata->min_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+	schedule_work(&bat_work);
+}
+
+static void wm97xx_bat_update(struct power_supply *bat_ps)
+{
+	int old_status = bat_status;
+
+	mutex_lock(&work_lock);
+
+	bat_status = (charge_gpiod) ?
+			(gpiod_get_value(charge_gpiod) ?
+			POWER_SUPPLY_STATUS_DISCHARGING :
+			POWER_SUPPLY_STATUS_CHARGING) :
+			POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (old_status != bat_status) {
+		pr_debug("%s: %i -> %i\n", bat_ps->desc->name, old_status,
+					bat_status);
+		power_supply_changed(bat_ps);
+	}
+
+	mutex_unlock(&work_lock);
+}
+
+static struct power_supply *bat_psy;
+static struct power_supply_desc bat_psy_desc = {
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property		= wm97xx_bat_get_property,
+	.external_power_changed = wm97xx_bat_external_power_changed,
+	.use_for_apm		= 1,
+};
+
+static void wm97xx_bat_work(struct work_struct *work)
+{
+	wm97xx_bat_update(bat_psy);
+}
+
+static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
+{
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+static int wm97xx_bat_suspend(struct device *dev)
+{
+	flush_work(&bat_work);
+	return 0;
+}
+
+static int wm97xx_bat_resume(struct device *dev)
+{
+	schedule_work(&bat_work);
+	return 0;
+}
+
+static const struct dev_pm_ops wm97xx_bat_pm_ops = {
+	.suspend	= wm97xx_bat_suspend,
+	.resume		= wm97xx_bat_resume,
+};
+#endif
+
+static int wm97xx_bat_probe(struct platform_device *dev)
+{
+	int ret = 0;
+	int props = 1;	/* POWER_SUPPLY_PROP_PRESENT */
+	int i = 0;
+	struct wm97xx_batt_pdata *pdata = dev->dev.platform_data;
+	struct power_supply_config cfg = {};
+
+	if (!pdata) {
+		dev_err(&dev->dev, "No platform data supplied\n");
+		return -EINVAL;
+	}
+
+	cfg.drv_data = pdata;
+
+	if (dev->id != -1)
+		return -EINVAL;
+
+	charge_gpiod = devm_gpiod_get_optional(&dev->dev, NULL, GPIOD_IN);
+	if (IS_ERR(charge_gpiod))
+		return dev_err_probe(&dev->dev,
+				     PTR_ERR(charge_gpiod),
+				     "failed to get charge GPIO\n");
+	if (charge_gpiod) {
+		gpiod_set_consumer_name(charge_gpiod, "BATT CHRG");
+		ret = request_irq(gpiod_to_irq(charge_gpiod),
+				wm97xx_chrg_irq, 0,
+				"AC Detect", dev);
+		if (ret)
+			return dev_err_probe(&dev->dev, ret,
+					     "failed to request GPIO irq\n");
+		props++;	/* POWER_SUPPLY_PROP_STATUS */
+	}
+
+	if (pdata->batt_tech >= 0)
+		props++;	/* POWER_SUPPLY_PROP_TECHNOLOGY */
+	if (pdata->temp_aux >= 0)
+		props++;	/* POWER_SUPPLY_PROP_TEMP */
+	if (pdata->batt_aux >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+	if (pdata->max_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+	if (pdata->min_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+	prop = kcalloc(props, sizeof(*prop), GFP_KERNEL);
+	if (!prop) {
+		ret = -ENOMEM;
+		goto err3;
+	}
+
+	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+	if (charge_gpiod)
+		prop[i++] = POWER_SUPPLY_PROP_STATUS;
+	if (pdata->batt_tech >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+	if (pdata->temp_aux >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_TEMP;
+	if (pdata->batt_aux >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+	if (pdata->max_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+	if (pdata->min_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+	INIT_WORK(&bat_work, wm97xx_bat_work);
+
+	if (!pdata->batt_name) {
+		dev_info(&dev->dev, "Please consider setting proper battery "
+				"name in platform definition file, falling "
+				"back to name \"wm97xx-batt\"\n");
+		bat_psy_desc.name = "wm97xx-batt";
+	} else
+		bat_psy_desc.name = pdata->batt_name;
+
+	bat_psy_desc.properties = prop;
+	bat_psy_desc.num_properties = props;
+
+	bat_psy = power_supply_register(&dev->dev, &bat_psy_desc, &cfg);
+	if (!IS_ERR(bat_psy)) {
+		schedule_work(&bat_work);
+	} else {
+		ret = PTR_ERR(bat_psy);
+		goto err4;
+	}
+
+	return 0;
+err4:
+	kfree(prop);
+err3:
+	if (charge_gpiod)
+		free_irq(gpiod_to_irq(charge_gpiod), dev);
+	return ret;
+}
+
+static int wm97xx_bat_remove(struct platform_device *dev)
+{
+	if (charge_gpiod)
+		free_irq(gpiod_to_irq(charge_gpiod), dev);
+	cancel_work_sync(&bat_work);
+	power_supply_unregister(bat_psy);
+	kfree(prop);
+	return 0;
+}
+
+static struct platform_driver wm97xx_bat_driver = {
+	.driver	= {
+		.name	= "wm97xx-battery",
+#ifdef CONFIG_PM
+		.pm	= &wm97xx_bat_pm_ops,
+#endif
+	},
+	.probe		= wm97xx_bat_probe,
+	.remove		= wm97xx_bat_remove,
+};
+
+module_platform_driver(wm97xx_bat_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("WM97xx battery driver");
diff --git a/drivers/power/supply/z2_battery.c b/drivers/power/supply/z2_battery.c
new file mode 100644
index 000000000..d033c1d3e
--- /dev/null
+++ b/drivers/power/supply/z2_battery.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery measurement code for Zipit Z2
+ *
+ * Copyright (C) 2009 Peter Edwards <sweetlilmre@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/z2_battery.h>
+
+#define	Z2_DEFAULT_NAME	"Z2"
+
+struct z2_charger {
+	struct z2_battery_info		*info;
+	struct gpio_desc		*charge_gpiod;
+	int				bat_status;
+	struct i2c_client		*client;
+	struct power_supply		*batt_ps;
+	struct power_supply_desc	batt_ps_desc;
+	struct mutex			work_lock;
+	struct work_struct		bat_work;
+};
+
+static unsigned long z2_read_bat(struct z2_charger *charger)
+{
+	int data;
+	data = i2c_smbus_read_byte_data(charger->client,
+					charger->info->batt_I2C_reg);
+	if (data < 0)
+		return 0;
+
+	return data * charger->info->batt_mult / charger->info->batt_div;
+}
+
+static int z2_batt_get_property(struct power_supply *batt_ps,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct z2_charger *charger = power_supply_get_drvdata(batt_ps);
+	struct z2_battery_info *info = charger->info;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = charger->bat_status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = info->batt_tech;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		if (info->batt_I2C_reg >= 0)
+			val->intval = z2_read_bat(charger);
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (info->max_voltage >= 0)
+			val->intval = info->max_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		if (info->min_voltage >= 0)
+			val->intval = info->min_voltage;
+		else
+			return -EINVAL;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void z2_batt_ext_power_changed(struct power_supply *batt_ps)
+{
+	struct z2_charger *charger = power_supply_get_drvdata(batt_ps);
+
+	schedule_work(&charger->bat_work);
+}
+
+static void z2_batt_update(struct z2_charger *charger)
+{
+	int old_status = charger->bat_status;
+
+	mutex_lock(&charger->work_lock);
+
+	charger->bat_status = charger->charge_gpiod ?
+		(gpiod_get_value(charger->charge_gpiod) ?
+		POWER_SUPPLY_STATUS_CHARGING :
+		POWER_SUPPLY_STATUS_DISCHARGING) :
+		POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (old_status != charger->bat_status) {
+		pr_debug("%s: %i -> %i\n", charger->batt_ps->desc->name,
+				old_status,
+				charger->bat_status);
+		power_supply_changed(charger->batt_ps);
+	}
+
+	mutex_unlock(&charger->work_lock);
+}
+
+static void z2_batt_work(struct work_struct *work)
+{
+	struct z2_charger *charger;
+	charger = container_of(work, struct z2_charger, bat_work);
+	z2_batt_update(charger);
+}
+
+static irqreturn_t z2_charge_switch_irq(int irq, void *devid)
+{
+	struct z2_charger *charger = devid;
+	schedule_work(&charger->bat_work);
+	return IRQ_HANDLED;
+}
+
+static int z2_batt_ps_init(struct z2_charger *charger, int props)
+{
+	int i = 0;
+	enum power_supply_property *prop;
+	struct z2_battery_info *info = charger->info;
+
+	if (charger->charge_gpiod)
+		props++;	/* POWER_SUPPLY_PROP_STATUS */
+	if (info->batt_tech >= 0)
+		props++;	/* POWER_SUPPLY_PROP_TECHNOLOGY */
+	if (info->batt_I2C_reg >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+	if (info->max_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+	if (info->min_voltage >= 0)
+		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+	prop = kcalloc(props, sizeof(*prop), GFP_KERNEL);
+	if (!prop)
+		return -ENOMEM;
+
+	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+	if (charger->charge_gpiod)
+		prop[i++] = POWER_SUPPLY_PROP_STATUS;
+	if (info->batt_tech >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+	if (info->batt_I2C_reg >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+	if (info->max_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+	if (info->min_voltage >= 0)
+		prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+	if (!info->batt_name) {
+		dev_info(&charger->client->dev,
+				"Please consider setting proper battery "
+				"name in platform definition file, falling "
+				"back to name \" Z2_DEFAULT_NAME \"\n");
+		charger->batt_ps_desc.name = Z2_DEFAULT_NAME;
+	} else
+		charger->batt_ps_desc.name = info->batt_name;
+
+	charger->batt_ps_desc.properties	= prop;
+	charger->batt_ps_desc.num_properties	= props;
+	charger->batt_ps_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
+	charger->batt_ps_desc.get_property	= z2_batt_get_property;
+	charger->batt_ps_desc.external_power_changed =
+						z2_batt_ext_power_changed;
+	charger->batt_ps_desc.use_for_apm	= 1;
+
+	return 0;
+}
+
+static int z2_batt_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	int ret = 0;
+	int props = 1;	/* POWER_SUPPLY_PROP_PRESENT */
+	struct z2_charger *charger;
+	struct z2_battery_info *info = client->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+
+	if (info == NULL) {
+		dev_err(&client->dev,
+			"Please set platform device platform_data"
+			" to a valid z2_battery_info pointer!\n");
+		return -EINVAL;
+	}
+
+	charger = kzalloc(sizeof(*charger), GFP_KERNEL);
+	if (charger == NULL)
+		return -ENOMEM;
+
+	charger->bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+	charger->info = info;
+	charger->client = client;
+	i2c_set_clientdata(client, charger);
+	psy_cfg.drv_data = charger;
+
+	mutex_init(&charger->work_lock);
+
+	charger->charge_gpiod = devm_gpiod_get_optional(&client->dev,
+							NULL, GPIOD_IN);
+	if (IS_ERR(charger->charge_gpiod)) {
+		ret = dev_err_probe(&client->dev,
+				     PTR_ERR(charger->charge_gpiod),
+				     "failed to get charge GPIO\n");
+		goto err;
+	}
+
+	if (charger->charge_gpiod) {
+		gpiod_set_consumer_name(charger->charge_gpiod, "BATT CHRG");
+
+		irq_set_irq_type(gpiod_to_irq(charger->charge_gpiod),
+				 IRQ_TYPE_EDGE_BOTH);
+		ret = request_irq(gpiod_to_irq(charger->charge_gpiod),
+				z2_charge_switch_irq, 0,
+				"AC Detect", charger);
+		if (ret)
+			goto err;
+	}
+
+	ret = z2_batt_ps_init(charger, props);
+	if (ret)
+		goto err3;
+
+	INIT_WORK(&charger->bat_work, z2_batt_work);
+
+	charger->batt_ps = power_supply_register(&client->dev,
+						 &charger->batt_ps_desc,
+						 &psy_cfg);
+	if (IS_ERR(charger->batt_ps)) {
+		ret = PTR_ERR(charger->batt_ps);
+		goto err4;
+	}
+
+	schedule_work(&charger->bat_work);
+
+	return 0;
+
+err4:
+	kfree(charger->batt_ps_desc.properties);
+err3:
+	if (charger->charge_gpiod)
+		free_irq(gpiod_to_irq(charger->charge_gpiod), charger);
+err:
+	kfree(charger);
+	return ret;
+}
+
+static void z2_batt_remove(struct i2c_client *client)
+{
+	struct z2_charger *charger = i2c_get_clientdata(client);
+
+	cancel_work_sync(&charger->bat_work);
+	power_supply_unregister(charger->batt_ps);
+
+	kfree(charger->batt_ps_desc.properties);
+	if (charger->charge_gpiod)
+		free_irq(gpiod_to_irq(charger->charge_gpiod), charger);
+
+	kfree(charger);
+}
+
+#ifdef CONFIG_PM
+static int z2_batt_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct z2_charger *charger = i2c_get_clientdata(client);
+
+	flush_work(&charger->bat_work);
+	return 0;
+}
+
+static int z2_batt_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct z2_charger *charger = i2c_get_clientdata(client);
+
+	schedule_work(&charger->bat_work);
+	return 0;
+}
+
+static const struct dev_pm_ops z2_battery_pm_ops = {
+	.suspend	= z2_batt_suspend,
+	.resume		= z2_batt_resume,
+};
+
+#define	Z2_BATTERY_PM_OPS	(&z2_battery_pm_ops)
+
+#else
+#define	Z2_BATTERY_PM_OPS	(NULL)
+#endif
+
+static const struct i2c_device_id z2_batt_id[] = {
+	{ "aer915", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, z2_batt_id);
+
+static struct i2c_driver z2_batt_driver = {
+	.driver	= {
+		.name	= "z2-battery",
+		.pm	= Z2_BATTERY_PM_OPS
+	},
+	.probe		= z2_batt_probe,
+	.remove		= z2_batt_remove,
+	.id_table	= z2_batt_id,
+};
+module_i2c_driver(z2_batt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>");
+MODULE_DESCRIPTION("Zipit Z2 battery driver");