summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml')
-rw-r--r--Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml59
1 files changed, 59 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 000000000..45d66c775
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: >
+ System power off support via a GPIO line. When a shutdown is
+ executed the operating system is expected to switch the GPIO
+ from inactive to active. After a delay (active-delay-ms) it
+ is expected to be switched back to inactive. After another
+ delay (inactive-delay-ms) it is configured as active again.
+ Finally the operating system assumes the power off failed if
+ the system is still running after waiting some time (timeout-ms).
+
+properties:
+ compatible:
+ const: gpio-poweroff
+
+ gpios:
+ maxItems: 1
+
+ input:
+ type: boolean
+ description: >
+ Initially configure the GPIO line as an input. Only reconfigure
+ it to an output when the power-off sequence is initiated. If this optional
+ property is not specified, the GPIO is initialized as an output in its inactive state.
+
+ active-delay-ms:
+ default: 100
+ description: Delay to wait after driving gpio active
+
+ inactive-delay-ms:
+ default: 100
+ description: Delay to wait after driving gpio inactive
+
+ timeout-ms:
+ default: 3000
+ description: Time to wait before assuming the power off sequence failed.
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 4 0>;
+ timeout-ms = <3000>;
+ };