summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power')
-rw-r--r--Documentation/devicetree/bindings/power/actions,owl-sps.txt21
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml184
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt63
-rw-r--r--Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml42
-rw-r--r--Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml79
-rw-r--r--Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml161
-rw-r--r--Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml51
-rw-r--r--Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml44
-rw-r--r--Documentation/devicetree/bindings/power/domain-idle-state.yaml76
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml138
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml144
-rw-r--r--Documentation/devicetree/bindings/power/fsl,scu-pd.yaml41
-rw-r--r--Documentation/devicetree/bindings/power/mediatek,power-controller.yaml212
-rw-r--r--Documentation/devicetree/bindings/power/mti,mips-cpc.yaml37
-rw-r--r--Documentation/devicetree/bindings/power/pd-samsung.yaml68
-rw-r--r--Documentation/devicetree/bindings/power/power-controller.txt17
-rw-r--r--Documentation/devicetree/bindings/power/power-domain.yaml137
-rw-r--r--Documentation/devicetree/bindings/power/power_domain.txt112
-rw-r--r--Documentation/devicetree/bindings/power/qcom,rpmpd.yaml192
-rw-r--r--Documentation/devicetree/bindings/power/renesas,apmu.yaml59
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml69
-rw-r--r--Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml121
-rw-r--r--Documentation/devicetree/bindings/power/reset/axxia-reset.txt20
-rw-r--r--Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt14
-rw-r--r--Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt17
-rw-r--r--Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml59
-rw-r--r--Documentation/devicetree/bindings/power/reset/gpio-restart.yaml86
-rw-r--r--Documentation/devicetree/bindings/power/reset/keystone-reset.txt67
-rw-r--r--Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt33
-rw-r--r--Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt20
-rw-r--r--Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt26
-rw-r--r--Documentation/devicetree/bindings/power/reset/ocelot-reset.txt19
-rw-r--r--Documentation/devicetree/bindings/power/reset/qcom,pon.yaml128
-rw-r--r--Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml35
-rw-r--r--Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt15
-rw-r--r--Documentation/devicetree/bindings/power/reset/reboot-mode.yaml49
-rw-r--r--Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml37
-rw-r--r--Documentation/devicetree/bindings/power/reset/restart-poweroff.txt8
-rw-r--r--Documentation/devicetree/bindings/power/reset/st-reset.txt11
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml62
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml55
-rw-r--r--Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml67
-rw-r--r--Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml83
-rw-r--r--Documentation/devicetree/bindings/power/rockchip,power-controller.yaml254
-rw-r--r--Documentation/devicetree/bindings/power/rockchip-io-domain.yaml390
-rw-r--r--Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml76
-rw-r--r--Documentation/devicetree/bindings/power/supply/battery.yaml184
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq2415x.yaml97
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24190.yaml92
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24257.yaml124
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24735.yaml89
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq2515x.yaml91
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq256xx.yaml109
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25890.yaml123
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25980.yaml114
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq27xxx.yaml95
-rw-r--r--Documentation/devicetree/bindings/power/supply/charger-manager.yaml217
-rw-r--r--Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml87
-rw-r--r--Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml106
-rw-r--r--Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml80
-rw-r--r--Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml52
-rw-r--r--Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml51
-rw-r--r--Documentation/devicetree/bindings/power/supply/gpio-charger.yaml94
-rw-r--r--Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml61
-rw-r--r--Documentation/devicetree/bindings/power/supply/isp1704.yaml42
-rw-r--r--Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml55
-rw-r--r--Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml44
-rw-r--r--Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml66
-rw-r--r--Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml67
-rw-r--r--Documentation/devicetree/bindings/power/supply/max77650-charger.yaml37
-rw-r--r--Documentation/devicetree/bindings/power/supply/max8925_battery.txt18
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml43
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml84
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml45
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml97
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml81
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml70
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml44
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml67
-rw-r--r--Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml96
-rw-r--r--Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml51
-rw-r--r--Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml48
-rw-r--r--Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml49
-rw-r--r--Documentation/devicetree/bindings/power/supply/olpc-battery.yaml27
-rw-r--r--Documentation/devicetree/bindings/power/supply/power-supply.yaml21
-rw-r--r--Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml178
-rw-r--r--Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml57
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml54
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml90
-rw-r--r--Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml163
-rw-r--r--Documentation/devicetree/bindings/power/supply/samsung,battery.yaml56
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml84
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml55
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml105
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml53
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml98
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt34
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml77
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml41
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml127
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml81
-rw-r--r--Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml182
-rw-r--r--Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml89
-rw-r--r--Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml36
-rw-r--r--Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml43
-rw-r--r--Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml68
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml35
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml34
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml37
-rw-r--r--Documentation/devicetree/bindings/power/ti-smartreflex.txt47
-rw-r--r--Documentation/devicetree/bindings/power/wakeup-source.txt70
-rw-r--r--Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt34
112 files changed, 8745 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
new file mode 100644
index 000000000..a3571937b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt
@@ -0,0 +1,21 @@
+Actions Semi Owl Smart Power System (SPS)
+
+Required properties:
+- compatible : "actions,s500-sps" for S500
+ "actions,s700-sps" for S700
+ "actions,s900-sps" for S900
+- reg : Offset and length of the register set for the device.
+- #power-domain-cells : Must be 1.
+ See macros in:
+ include/dt-bindings/power/owl-s500-powergate.h for S500
+ include/dt-bindings/power/owl-s700-powergate.h for S700
+ include/dt-bindings/power/owl-s900-powergate.h for S900
+
+
+Example:
+
+ sps: power-controller@b01b0100 {
+ compatible = "actions,s500-sps";
+ reg = <0xb01b0100 0x100>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
new file mode 100644
index 000000000..43a932237
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Everything-Else Power Domains
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |+
+ The Everything-Else Power Domains node should be the child of a syscon
+ node with the required property:
+
+ - compatible: Should be the following:
+ "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson8-pwrc
+ - amlogic,meson8b-pwrc
+ - amlogic,meson8m2-pwrc
+ - amlogic,meson-gxbb-pwrc
+ - amlogic,meson-axg-pwrc
+ - amlogic,meson-g12a-pwrc
+ - amlogic,meson-sm1-pwrc
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: vpu
+ - const: vapb
+
+ resets:
+ minItems: 5
+ maxItems: 12
+
+ reset-names:
+ minItems: 5
+ maxItems: 12
+
+ "#power-domain-cells":
+ const: 1
+
+ amlogic,ao-sysctrl:
+ description: phandle to the AO sysctrl node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson8b-pwrc
+ - amlogic,meson8m2-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: dblk
+ - const: pic_dc
+ - const: hdmi_apb
+ - const: hdmi_system
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vencl
+ - const: viu
+ - const: venc
+ - const: rdma
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-gxbb-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: bt656
+ - const: dvin
+ - const: rdma
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vdi6
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-axg-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-pwrc
+ - amlogic,meson-sm1-pwrc
+ then:
+ properties:
+ reset-names:
+ items:
+ - const: viu
+ - const: venc
+ - const: vcbus
+ - const: bt656
+ - const: rdma
+ - const: venci
+ - const: vencp
+ - const: vdac
+ - const: vdi6
+ - const: vencl
+ - const: vid_lock
+ required:
+ - resets
+ - reset-names
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - "#power-domain-cells"
+ - amlogic,ao-sysctrl
+
+additionalProperties: false
+
+examples:
+ - |
+ pwrc: power-controller {
+ compatible = "amlogic,meson-sm1-pwrc";
+ #power-domain-cells = <1>;
+ amlogic,ao-sysctrl = <&rti>;
+ resets = <&reset_viu>,
+ <&reset_venc>,
+ <&reset_vcbus>,
+ <&reset_bt656>,
+ <&reset_rdma>,
+ <&reset_venci>,
+ <&reset_vencp>,
+ <&reset_vdac>,
+ <&reset_vdi6>,
+ <&reset_vencl>,
+ <&reset_vid_lock>;
+ reset-names = "viu", "venc", "vcbus", "bt656",
+ "rdma", "venci", "vencp", "vdac",
+ "vdi6", "vencl", "vid_lock";
+ clocks = <&clk_vpu>, <&clk_vapb>;
+ clock-names = "vpu", "vapb";
+ };
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
new file mode 100644
index 000000000..99b5b10cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
@@ -0,0 +1,63 @@
+Amlogic Meson Power Controller
+==============================
+
+The Amlogic Meson SoCs embeds an internal Power domain controller.
+
+VPU Power Domain
+----------------
+
+The Video Processing Unit power domain is controlled by this power controller,
+but the domain requires some external resources to meet the correct power
+sequences.
+The bindings must respect the power domain bindings as described in the file
+power-domain.yaml
+
+Device Tree Bindings:
+---------------------
+
+Required properties:
+- compatible: should be one of the following :
+ - "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
+ - "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
+- #power-domain-cells: should be 0
+- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
+- resets: phandles to the reset lines needed for this power demain sequence
+ as described in ../reset/reset.txt
+- clocks: from common clock binding: handle to VPU and VAPB clocks
+- clock-names: from common clock binding: must contain "vpu", "vapb"
+ corresponding to entry in the clocks property.
+
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
+Example:
+-------
+
+ao_sysctrl: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ pwrc_vpu: power-controller-vpu {
+ compatible = "amlogic,meson-gx-pwrc-vpu";
+ #power-domain-cells = <0>;
+ amlogic,hhi-sysctrl = <&sysctrl>;
+ resets = <&reset RESET_VIU>,
+ <&reset RESET_VENC>,
+ <&reset RESET_VCBUS>,
+ <&reset RESET_BT656>,
+ <&reset RESET_DVIN_RESET>,
+ <&reset RESET_RDMA>,
+ <&reset RESET_VENCI>,
+ <&reset RESET_VENCP>,
+ <&reset RESET_VDAC>,
+ <&reset RESET_VDI6>,
+ <&reset RESET_VENCL>,
+ <&reset RESET_VID_LOCK>;
+ clocks = <&clkc CLKID_VPU>,
+ <&clkc CLKID_VAPB>;
+ clock-names = "vpu", "vapb";
+ };
+};
+
+
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
new file mode 100644
index 000000000..eab21bb20
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+# Copyright (c) 2019 Amlogic, Inc
+# Author: Jianxin Pan <jianxin.pan@amlogic.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Secure Power Domains
+
+maintainers:
+ - Jianxin Pan <jianxin.pan@amlogic.com>
+
+description: |+
+ Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
+ of secure-monitor.
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-a1-pwrc
+ - amlogic,meson-s4-pwrc
+
+ "#power-domain-cells":
+ const: 1
+
+required:
+ - compatible
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ secure-monitor {
+ compatible = "amlogic,meson-gxbb-sm";
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson-a1-pwrc";
+ #power-domain-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
new file mode 100644
index 000000000..94d369eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/apple,pmgr-pwrstate.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC PMGR Power States
+
+maintainers:
+ - Hector Martin <marcan@marcan.st>
+
+allOf:
+ - $ref: power-domain.yaml#
+
+description: |
+ Apple SoCs include PMGR blocks responsible for power management,
+ which can control various clocks, resets, power states, and
+ performance features. This binding describes the device power
+ state registers, which control power states and resets.
+
+ Each instance of a power controller within the PMGR syscon node
+ represents a generic power domain provider, as documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml.
+ The provider controls a single SoC block. The power hierarchy is
+ represented via power-domains relationships between these nodes.
+
+ See Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+ for the top-level PMGR node documentation.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t8103-pmgr-pwrstate
+ - apple,t6000-pmgr-pwrstate
+ - const: apple,pmgr-pwrstate
+
+ reg:
+ maxItems: 1
+
+ "#power-domain-cells":
+ const: 0
+
+ "#reset-cells":
+ const: 0
+
+ power-domains:
+ description:
+ Reference to parent power domains. A domain may have multiple parents,
+ and all will be powered up when it is powered.
+ minItems: 1
+ maxItems: 8 # Arbitrary, should be enough
+
+ label:
+ description:
+ Specifies the name of the SoC domain being controlled. This is used to
+ name the power/reset domains.
+
+ apple,always-on:
+ description:
+ Forces this power domain to always be powered up.
+ type: boolean
+
+ apple,min-state:
+ description:
+ Specifies the minimum power state for auto-PM.
+ 0 = power gated, 4 = clock gated, 15 = on.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+required:
+ - compatible
+ - reg
+ - "#power-domain-cells"
+ - "#reset-cells"
+ - label
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
new file mode 100644
index 000000000..301db7daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR) bindings
+
+maintainers:
+ - Niklas Cassel <nks@flawful.org>
+
+description: |
+ CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+ or other device. Each OPP of a device corresponds to a "corner" that has
+ a range of valid voltages for a particular frequency. While the device is
+ running at a particular frequency, CPR monitors dynamic factors such as
+ temperature, etc. and suggests adjustments to the voltage to save power
+ and meet silicon characteristic requirements.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,qcs404-cpr
+ - const: qcom,cpr
+
+ reg:
+ description: Base address and size of the RBCPR register region.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Reference clock.
+
+ clock-names:
+ items:
+ - const: ref
+
+ vdd-apc-supply:
+ description: APC regulator supply.
+
+ '#power-domain-cells':
+ const: 0
+
+ operating-points-v2:
+ description: |
+ A phandle to the OPP table containing the performance states
+ supported by the CPR power domain.
+
+ acc-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to the syscon used for writing ACC settings.
+
+ nvmem-cells:
+ items:
+ - description: Corner 1 quotient offset
+ - description: Corner 2 quotient offset
+ - description: Corner 3 quotient offset
+ - description: Corner 1 initial voltage
+ - description: Corner 2 initial voltage
+ - description: Corner 3 initial voltage
+ - description: Corner 1 quotient
+ - description: Corner 2 quotient
+ - description: Corner 3 quotient
+ - description: Corner 1 ring oscillator
+ - description: Corner 2 ring oscillator
+ - description: Corner 3 ring oscillator
+ - description: Fuse revision
+
+ nvmem-cell-names:
+ items:
+ - const: cpr_quotient_offset1
+ - const: cpr_quotient_offset2
+ - const: cpr_quotient_offset3
+ - const: cpr_init_voltage1
+ - const: cpr_init_voltage2
+ - const: cpr_init_voltage3
+ - const: cpr_quotient1
+ - const: cpr_quotient2
+ - const: cpr_quotient3
+ - const: cpr_ring_osc1
+ - const: cpr_ring_osc2
+ - const: cpr_ring_osc3
+ - const: cpr_fuse_revision
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - vdd-apc-supply
+ - '#power-domain-cells'
+ - operating-points-v2
+ - nvmem-cells
+ - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ cpr_opp_table: opp-table-cpr {
+ compatible = "operating-points-v2-qcom-level";
+
+ cpr_opp1: opp1 {
+ opp-level = <1>;
+ qcom,opp-fuse-level = <1>;
+ };
+ cpr_opp2: opp2 {
+ opp-level = <2>;
+ qcom,opp-fuse-level = <2>;
+ };
+ cpr_opp3: opp3 {
+ opp-level = <3>;
+ qcom,opp-fuse-level = <3>;
+ };
+ };
+
+ power-controller@b018000 {
+ compatible = "qcom,qcs404-cpr", "qcom,cpr";
+ reg = <0x0b018000 0x1000>;
+ interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xo_board>;
+ clock-names = "ref";
+ vdd-apc-supply = <&pms405_s3>;
+ #power-domain-cells = <0>;
+ operating-points-v2 = <&cpr_opp_table>;
+ acc-syscon = <&tcsr>;
+
+ nvmem-cells = <&cpr_efuse_quot_offset1>,
+ <&cpr_efuse_quot_offset2>,
+ <&cpr_efuse_quot_offset3>,
+ <&cpr_efuse_init_voltage1>,
+ <&cpr_efuse_init_voltage2>,
+ <&cpr_efuse_init_voltage3>,
+ <&cpr_efuse_quot1>,
+ <&cpr_efuse_quot2>,
+ <&cpr_efuse_quot3>,
+ <&cpr_efuse_ring1>,
+ <&cpr_efuse_ring2>,
+ <&cpr_efuse_ring3>,
+ <&cpr_efuse_revision>;
+ nvmem-cell-names = "cpr_quotient_offset1",
+ "cpr_quotient_offset2",
+ "cpr_quotient_offset3",
+ "cpr_init_voltage1",
+ "cpr_init_voltage2",
+ "cpr_init_voltage3",
+ "cpr_quotient1",
+ "cpr_quotient2",
+ "cpr_quotient3",
+ "cpr_ring_osc1",
+ "cpr_ring_osc2",
+ "cpr_ring_osc3",
+ "cpr_fuse_revision";
+ };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
new file mode 100644
index 000000000..f8e7ddbd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom PMB (Power Management Bus) controller
+
+description: This document describes Broadcom's PMB controller. It supports
+ powering various types of connected devices (e.g. PCIe, USB, SATA).
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm4908-pmb
+ - brcm,bcm63138-pmb
+
+ reg:
+ description: register space of one or more buses
+ maxItems: 1
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Flag to use for block working in big endian mode.
+
+ "#power-domain-cells":
+ description: cell specifies device ID (see bcm-pmb.h)
+ const: 1
+
+required:
+ - reg
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/bcm-pmb.h>
+
+ pmb: power-controller@802800e0 {
+ compatible = "brcm,bcm4908-pmb";
+ reg = <0x802800e0 0x40>;
+ #power-domain-cells = <1>;
+ };
+
+ foo {
+ power-domains = <&pmb BCM_PMB_PCIE0>;
+ };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
new file mode 100644
index 000000000..d867bd697
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx power domain driver
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+ BCM6318, BCM6328, BCM6362 and BCM63268 SoCs have a power domain controller
+ to enable/disable certain components in order to save power.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm6318-power-controller
+ - brcm,bcm6328-power-controller
+ - brcm,bcm6362-power-controller
+ - brcm,bcm63268-power-controller
+
+ reg:
+ maxItems: 1
+
+ "#power-domain-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
new file mode 100644
index 000000000..4ee920a1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States binding description
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+ A domain idle state node represents the state parameters that will be used to
+ select the state when there are no active components in the PM domain.
+
+properties:
+ $nodename:
+ const: domain-idle-states
+
+patternProperties:
+ "^(cpu|cluster|domain)-":
+ type: object
+ additionalProperties: false
+ description:
+ Each state node represents a domain idle state description.
+
+ properties:
+ compatible:
+ const: domain-idle-state
+
+ entry-latency-us:
+ description:
+ The worst case latency in microseconds required to enter the idle
+ state. Note that, the exit-latency-us duration may be guaranteed only
+ after the entry-latency-us has passed.
+
+ exit-latency-us:
+ description:
+ The worst case latency in microseconds required to exit the idle
+ state.
+
+ min-residency-us:
+ description:
+ The minimum residency duration in microseconds after which the idle
+ state will yield power benefits, after overcoming the overhead while
+ entering the idle state.
+
+ arm,psci-suspend-param:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ power_state parameter to pass to the ARM PSCI suspend call.
+
+ Device tree nodes that require usage of PSCI CPU_SUSPEND function
+ (i.e. idle states node with entry-method property is set to "psci")
+ must specify this property.
+
+ required:
+ - compatible
+ - entry-latency-us
+ - exit-latency-us
+ - min-residency-us
+
+additionalProperties: false
+
+examples:
+ - |
+
+ domain-idle-states {
+ domain_retention: domain-retention {
+ compatible = "domain-idle-state";
+ entry-latency-us = <20>;
+ exit-latency-us = <40>;
+ min-residency-us = <80>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
new file mode 100644
index 000000000..777e1d852
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ The i.MX6 General Power Control (GPC) block contains DVFS load tracking
+ counters and Power Gating Control (PGC).
+
+ The power domains are generic power domain providers as documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml. They are
+ described as subnodes of the power gating controller 'pgc' node of the GPC.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle pointing to the power domain the device belongs
+ to.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6q-gpc
+ - fsl,imx6qp-gpc
+ - fsl,imx6sl-gpc
+ - fsl,imx6sx-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipg
+
+ pgc:
+ type: object
+ additionalProperties: false
+ description: list of power domains provided by this controller.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "power-domain@[0-9]$":
+ type: object
+ additionalProperties: false
+
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ The following DOMAIN_INDEX values are valid for i.MX6Q:
+ ARM_DOMAIN 0
+ PU_DOMAIN 1
+ The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+ DISPLAY_DOMAIN 2
+ The following additional DOMAIN_INDEX value is valid for i.MX6SX:
+ PCI_DOMAIN 3
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 7
+
+ power-supply: true
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+ required:
+ - '#address-cells'
+ - '#size-cells'
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@20dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
+ clock-names = "ipg";
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@0 {
+ reg = <0>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_pu: power-domain@1 {
+ reg = <1>;
+ #power-domain-cells = <0>;
+ power-supply = <&reg_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
new file mode 100644
index 000000000..dfdb8dfb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Power Controller v2
+
+maintainers:
+ - Andrey Smirnov <andrew.smirnov@gmail.com>
+
+description: |
+ The i.MX7S/D General Power Control (GPC) block contains Power Gating
+ Control (PGC) for various power domains.
+
+ Power domains contained within GPC node are generic power domain
+ providers, documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml, which are
+ described as subnodes of the power gating controller 'pgc' node.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for PGC node representing the domain.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx7d-gpc
+ - fsl,imx8mn-gpc
+ - fsl,imx8mq-gpc
+ - fsl,imx8mm-gpc
+ - fsl,imx8mp-gpc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ '#interrupt-cells':
+ const: 3
+
+ pgc:
+ type: object
+ additionalProperties: false
+ description: list of power domains provided by this controller.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ "power-domain@[0-9a-f]+$":
+ type: object
+ additionalProperties: false
+
+ properties:
+
+ '#power-domain-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in
+ include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
+ include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
+ include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
+ include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing to ensure reset propagation into devices located
+ inside this power domain.
+ minItems: 1
+ maxItems: 5
+
+ power-supply: true
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ description: |
+ A number of phandles to resets that need to be asserted during
+ power-up sequencing of the domain. The resets belong to devices
+ located inside the power domain, which need to be held in reset
+ across the power-up sequence. So no means to specify what each
+ reset is in a generic power-domain binding.
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - '#power-domain-cells'
+ - reg
+
+ required:
+ - '#address-cells'
+ - '#size-cells'
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - pgc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpc@303a0000 {
+ compatible = "fsl,imx7d-gpc";
+ reg = <0x303a0000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_mipi_phy: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <0>;
+ power-supply = <&reg_1p0d>;
+ };
+
+ pgc_pcie_phy: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <1>;
+ power-supply = <&reg_1p0d>;
+ };
+
+ pgc_hsic_phy: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <2>;
+ power-supply = <&reg_1p2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
new file mode 100644
index 000000000..1f72b18ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ Power domain bindings based on SCU Message Protocol
+
+allOf:
+ - $ref: power-domain.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8qm-scu-pd
+ - fsl,imx8qxp-scu-pd
+ - const: fsl,scu-pd
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ power-controller {
+ compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
new file mode 100644
index 000000000..605ec7ab5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Power Domains Controller
+
+maintainers:
+ - MandyJH Liu <mandyjh.liu@mediatek.com>
+ - Matthias Brugger <mbrugger@suse.com>
+
+description: |
+ Mediatek processors include support for multiple power domains which can be
+ powered up/down by software based on different application scenes to save power.
+
+ IP cores belonging to a power domain should contain a 'power-domains'
+ property that is a phandle for SCPSYS node representing the domain.
+
+properties:
+ $nodename:
+ pattern: '^power-controller(@[0-9a-f]+)?$'
+
+ compatible:
+ enum:
+ - mediatek,mt6795-power-controller
+ - mediatek,mt8167-power-controller
+ - mediatek,mt8173-power-controller
+ - mediatek,mt8183-power-controller
+ - mediatek,mt8186-power-controller
+ - mediatek,mt8192-power-controller
+ - mediatek,mt8195-power-controller
+
+ '#power-domain-cells':
+ const: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+ $ref: "#/$defs/power-domain-node"
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+ unevaluatedProperties: false
+
+$defs:
+ power-domain-node:
+ type: object
+ description: |
+ Represents the power domains within the power controller node as documented
+ in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ properties:
+
+ '#power-domain-cells':
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ reg:
+ description: |
+ Power domain index. Valid values are defined in:
+ "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
+ "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
+ "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
+ "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
+ "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
+ "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
+ maxItems: 1
+
+ clocks:
+ description: |
+ A number of phandles to clocks that need to be enabled during domain
+ power-up sequencing.
+
+ clock-names:
+ description: |
+ List of names of clocks, in order to match the power-up sequencing
+ for each power domain we need to group the clocks by name. BASIC
+ clocks need to be enabled before enabling the corresponding power
+ domain, and should not have a '-' in their name (i.e mm, mfg, venc).
+ SUSBYS clocks need to be enabled before releasing the bus protection,
+ and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
+
+ In order to follow properly the power-up sequencing, the clocks must
+ be specified by order, adding first the BASIC clocks followed by the
+ SUSBSYS clocks.
+
+ domain-supply:
+ description: domain regulator supply.
+
+ mediatek,infracfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the device containing the INFRACFG register range.
+
+ mediatek,smi:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the device containing the SMI register range.
+
+ required:
+ - reg
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ scpsys: syscon@10006000 {
+ compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
+ reg = <0 0x10006000 0 0x1000>;
+
+ spm: power-controller {
+ compatible = "mediatek,mt8173-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */
+ power-domain@MT8173_POWER_DOMAIN_VDEC {
+ reg = <MT8173_POWER_DOMAIN_VDEC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC {
+ reg = <MT8173_POWER_DOMAIN_VENC>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_SEL>;
+ clock-names = "mm", "venc";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_ISP {
+ reg = <MT8173_POWER_DOMAIN_ISP>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MM {
+ reg = <MT8173_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>;
+ clock-names = "mm";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+ reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&topckgen CLK_TOP_VENC_LT_SEL>;
+ clock-names = "mm", "venclt";
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_AUDIO {
+ reg = <MT8173_POWER_DOMAIN_AUDIO>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_USB {
+ reg = <MT8173_POWER_DOMAIN_USB>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+ reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+ clocks = <&clk26m>;
+ clock-names = "mfg";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+ reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8173_POWER_DOMAIN_MFG {
+ reg = <MT8173_POWER_DOMAIN_MFG>;
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
new file mode 100644
index 000000000..be447ccfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/mti,mips-cpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Cluster Power Controller
+
+description: |
+ Defines a location of the MIPS Cluster Power Controller registers.
+
+maintainers:
+ - Paul Burton <paulburton@kernel.org>
+
+properties:
+ compatible:
+ const: mti,mips-cpc
+
+ reg:
+ description: |
+ Base address and size of an unoccupied memory region, which will be
+ used to map the MIPS CPC registers block.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cpc@1bde0000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x1bde0000 0x8000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/pd-samsung.yaml b/Documentation/devicetree/bindings/power/pd-samsung.yaml
new file mode 100644
index 000000000..9c2c51133
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/pd-samsung.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Power Domains
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+ Exynos processors include support for multiple power domains which are used
+ to gate power to one or more peripherals on the processor.
+
+allOf:
+ - $ref: power-domain.yaml#
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4210-pd
+ - samsung,exynos5433-pd
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ deprecated: true
+ maxItems: 1
+
+ clock-names:
+ deprecated: true
+ maxItems: 1
+
+ label:
+ description:
+ Human readable string with domain name. Will be visible in userspace
+ to let user to distinguish between multiple domains in SoC.
+
+ "#power-domain-cells":
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#power-domain-cells"
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ lcd0_pd: power-domain@10023c80 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023c80 0x20>;
+ #power-domain-cells = <0>;
+ label = "LCD0";
+ };
+
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ #power-domain-cells = <0>;
+ label = "MFC";
+ };
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt
new file mode 100644
index 000000000..e45affea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-controller.txt
@@ -0,0 +1,17 @@
+* Generic system power control capability
+
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+
+Example:
+
+act8846: act8846@5 {
+ compatible = "active-semi,act8846";
+ system-power-controller;
+}
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
new file mode 100644
index 000000000..889091b98
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/power-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PM domains
+
+maintainers:
+ - Rafael J. Wysocki <rjw@rjwysocki.net>
+ - Kevin Hilman <khilman@kernel.org>
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |+
+ System on chip designs are often divided into multiple PM domains that can be
+ used for power gating of selected IP blocks for power saving by reduced leakage
+ current.
+
+ This device tree binding can be used to bind PM domain consumer devices with
+ their PM domains provided by PM domain providers. A PM domain provider can be
+ represented by any node in the device tree and can provide one or more PM
+ domains. A consumer node can refer to the provider by a phandle and a set of
+ phandle arguments (so called PM domain specifiers) of length specified by the
+ \#power-domain-cells property in the PM domain provider node.
+
+properties:
+ $nodename:
+ pattern: "^(power-controller|power-domain)([@-].*)?$"
+
+ domain-idle-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description: |
+ Phandles of idle states that defines the available states for the
+ power-domain provider. The idle state definitions are compatible with the
+ domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+ Note that, the domain-idle-state property reflects the idle states of this
+ PM domain and not the idle states of the devices or sub-domains in the PM
+ domain. Devices and sub-domains have their own idle states independent of
+ the parent domain's idle states. In the absence of this property, the
+ domain would be considered as capable of being powered-on or powered-off.
+
+ operating-points-v2:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Phandles to the OPP tables of power domains provided by a power domain
+ provider. If the provider provides a single power domain only or all
+ the power domains provided by the provider have identical OPP tables,
+ then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml
+ for more information.
+
+ "#power-domain-cells":
+ description:
+ Number of cells in a PM domain specifier. Typically 0 for nodes
+ representing a single PM domain and 1 for nodes providing multiple PM
+ domains (e.g. power controllers), but can be any value as specified
+ by device tree binding documentation of particular provider.
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier as defined by bindings of the power
+ controller specified by phandle. Some power domains might be powered
+ from another power domain (or have other hardware specific
+ dependencies). For representing such dependency a standard PM domain
+ consumer binding is used. When provided, all domains created
+ by the given provider should be subdomains of the domain specified
+ by this binding.
+
+required:
+ - "#power-domain-cells"
+
+additionalProperties: true
+
+examples:
+ - |
+ power: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
+ // The node above defines a power controller that is a PM domain provider and
+ // expects one cell as its phandle argument.
+
+ - |
+ parent2: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
+ child2: power-controller@12341000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent2 0>;
+ #power-domain-cells = <1>;
+ };
+
+ // The nodes above define two power controllers: 'parent' and 'child'.
+ // Domains created by the 'child' power controller are subdomains of '0' power
+ // domain provided by the 'parent' power controller.
+
+ - |
+ parent3: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+ };
+
+ child3: power-controller@12341000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent3>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_PWR_DN>;
+ };
+
+ domain-idle-states {
+ DOMAIN_RET: domain-retention {
+ compatible = "domain-idle-state";
+ entry-latency-us = <1000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <10000>;
+ };
+
+ DOMAIN_PWR_DN: domain-pwr-dn {
+ compatible = "domain-idle-state";
+ entry-latency-us = <5000>;
+ exit-latency-us = <8000>;
+ min-residency-us = <7000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
new file mode 100644
index 000000000..08497ef26
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -0,0 +1,112 @@
+* Generic PM domains
+
+System on chip designs are often divided into multiple PM domains that can be
+used for power gating of selected IP blocks for power saving by reduced leakage
+current.
+
+This device tree binding can be used to bind PM domain consumer devices with
+their PM domains provided by PM domain providers. A PM domain provider can be
+represented by any node in the device tree and can provide one or more PM
+domains. A consumer node can refer to the provider by a phandle and a set of
+phandle arguments (so called PM domain specifiers) of length specified by the
+#power-domain-cells property in the PM domain provider node.
+
+==PM domain providers==
+
+See power-domain.yaml.
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains : A list of PM domain specifiers, as defined by bindings of
+ the power controller that is the PM domain provider.
+
+Optional properties:
+ - power-domain-names : A list of power domain name strings sorted in the same
+ order as the power-domains property. Consumers drivers will use
+ power-domain-names to match power domains with power-domains
+ specifiers.
+
+Example:
+
+ leaky-device@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&power 0>;
+ power-domain-names = "io";
+ };
+
+ leaky-device@12351000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12351000 0x1000>;
+ power-domains = <&power 0>, <&power 1> ;
+ power-domain-names = "io", "clk";
+ };
+
+The first example above defines a typical PM domain consumer device, which is
+located inside a PM domain with index 0 of a power controller represented by a
+node with the label "power".
+In the second example the consumer device are partitioned across two PM domains,
+the first with index 0 and the second with index 1, of a power controller that
+is represented by a node with the label "power".
+
+Optional properties:
+- required-opps: This contains phandle to an OPP node in another device's OPP
+ table. It may contain an array of phandles, where each phandle points to an
+ OPP of a different device. It should not contain multiple phandles to the OPP
+ nodes in the same OPP table. This specifies the minimum required OPP of the
+ device(s), whose OPP's phandle is present in this property, for the
+ functioning of the current device at the current OPP (where this property is
+ present).
+
+Example:
+- OPP table for domain provider that provides two domains.
+
+ domain0_opp_table: opp-table0 {
+ compatible = "operating-points-v2";
+
+ domain0_opp_0: opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <975000 970000 985000>;
+ };
+ domain0_opp_1: opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1000000 980000 1010000>;
+ };
+ };
+
+ domain1_opp_table: opp-table1 {
+ compatible = "operating-points-v2";
+
+ domain1_opp_0: opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <975000 970000 985000>;
+ };
+ domain1_opp_1: opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1000000 980000 1010000>;
+ };
+ };
+
+ power: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>;
+ };
+
+ leaky-device0@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&power 0>;
+ required-opps = <&domain0_opp_0>;
+ };
+
+ leaky-device1@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&power 1>;
+ required-opps = <&domain1_opp_1>;
+ };
+
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
new file mode 100644
index 000000000..5b4eda919
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM/RPMh Power domains
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+ which then translates it into a corresponding voltage on a rail.
+
+properties:
+ compatible:
+ enum:
+ - qcom,mdm9607-rpmpd
+ - qcom,msm8226-rpmpd
+ - qcom,msm8909-rpmpd
+ - qcom,msm8916-rpmpd
+ - qcom,msm8939-rpmpd
+ - qcom,msm8953-rpmpd
+ - qcom,msm8976-rpmpd
+ - qcom,msm8994-rpmpd
+ - qcom,msm8996-rpmpd
+ - qcom,msm8998-rpmpd
+ - qcom,qcm2290-rpmpd
+ - qcom,qcs404-rpmpd
+ - qcom,sa8540p-rpmhpd
+ - qcom,sdm660-rpmpd
+ - qcom,sc7180-rpmhpd
+ - qcom,sc7280-rpmhpd
+ - qcom,sc8180x-rpmhpd
+ - qcom,sc8280xp-rpmhpd
+ - qcom,sdm845-rpmhpd
+ - qcom,sdx55-rpmhpd
+ - qcom,sdx65-rpmhpd
+ - qcom,sm6115-rpmpd
+ - qcom,sm6125-rpmpd
+ - qcom,sm6350-rpmhpd
+ - qcom,sm6375-rpmpd
+ - qcom,sm8150-rpmhpd
+ - qcom,sm8250-rpmhpd
+ - qcom,sm8350-rpmhpd
+ - qcom,sm8450-rpmhpd
+
+ '#power-domain-cells':
+ const: 1
+
+ operating-points-v2: true
+
+ opp-table:
+ type: object
+
+required:
+ - compatible
+ - '#power-domain-cells'
+ - operating-points-v2
+
+additionalProperties: false
+
+examples:
+ - |
+
+ // Example 1 (rpmh power domain controller and OPP table):
+
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdm845-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+ - |
+
+ // Example 2 (rpm power domain controller and OPP table):
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_low: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp_ret: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp_normal: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp_high: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+
+ - |
+
+ // Example 3 (Client/Consumer device using OPP table):
+
+ leaky-device0@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&rpmhpd 0>;
+ operating-points-v2 = <&leaky_opp_table>;
+ };
+
+ leaky_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp1 {
+ opp-hz = /bits/ 64 <144000>;
+ required-opps = <&rpmhpd_opp_low>;
+ };
+
+ opp2 {
+ opp-hz = /bits/ 64 <400000>;
+ required-opps = <&rpmhpd_opp_ret>;
+ };
+
+ opp3 {
+ opp-hz = /bits/ 64 <20000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp4 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_normal>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
new file mode 100644
index 000000000..f2cc89e7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,apmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Advanced Power Management Unit
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Magnus Damm <magnus.damm@gmail.com>
+
+description:
+ Renesas R-Car Gen2 and RZ/G1 SoCs utilize one or more APMU hardware units for
+ CPU core power domain control including SMP boot and CPU Hotplug.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a7742-apmu # RZ/G1H
+ - renesas,r8a7743-apmu # RZ/G1M
+ - renesas,r8a7744-apmu # RZ/G1N
+ - renesas,r8a7745-apmu # RZ/G1E
+ - renesas,r8a77470-apmu # RZ/G1C
+ - renesas,r8a7790-apmu # R-Car H2
+ - renesas,r8a7791-apmu # R-Car M2-W
+ - renesas,r8a7792-apmu # R-Car V2H
+ - renesas,r8a7793-apmu # R-Car M2-N
+ - renesas,r8a7794-apmu # R-Car E2
+ - const: renesas,apmu
+
+ reg:
+ maxItems: 1
+
+ cpus:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ minItems: 1
+ maxItems: 4
+ description: |
+ Array of phandles pointing to CPU cores, which should match the order of
+ CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+ Management Unit section of the device's datasheet.
+
+required:
+ - compatible
+ - reg
+ - cpus
+
+additionalProperties: false
+
+examples:
+ - |
+ apmu@e6152000 {
+ compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+ reg = <0xe6152000 0x188>;
+ cpus = <&cpu0>, <&cpu1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
new file mode 100644
index 000000000..0720b5488
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G System Controller
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+ The R-Car (RZ/G) System Controller provides power management for the CPU
+ cores and various coprocessors.
+ The power domain IDs for consumers are defined in header files::
+ include/dt-bindings/power/r8*-sysc.h
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a7742-sysc # RZ/G1H
+ - renesas,r8a7743-sysc # RZ/G1M
+ - renesas,r8a7744-sysc # RZ/G1N
+ - renesas,r8a7745-sysc # RZ/G1E
+ - renesas,r8a77470-sysc # RZ/G1C
+ - renesas,r8a774a1-sysc # RZ/G2M
+ - renesas,r8a774b1-sysc # RZ/G2N
+ - renesas,r8a774c0-sysc # RZ/G2E
+ - renesas,r8a774e1-sysc # RZ/G2H
+ - renesas,r8a7779-sysc # R-Car H1
+ - renesas,r8a7790-sysc # R-Car H2
+ - renesas,r8a7791-sysc # R-Car M2-W
+ - renesas,r8a7792-sysc # R-Car V2H
+ - renesas,r8a7793-sysc # R-Car M2-N
+ - renesas,r8a7794-sysc # R-Car E2
+ - renesas,r8a7795-sysc # R-Car H3
+ - renesas,r8a77961-sysc # R-Car M3-W+
+ - renesas,r8a77965-sysc # R-Car M3-N
+ - renesas,r8a7796-sysc # R-Car M3-W
+ - renesas,r8a77970-sysc # R-Car V3M
+ - renesas,r8a77980-sysc # R-Car V3H
+ - renesas,r8a77990-sysc # R-Car E3
+ - renesas,r8a77995-sysc # R-Car D3
+ - renesas,r8a779a0-sysc # R-Car V3U
+ - renesas,r8a779f0-sysc # R-Car S4-8
+ - renesas,r8a779g0-sysc # R-Car V4H
+
+ reg:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ // System Controller node
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7791-sysc";
+ reg = <0xe6180000 0x0200>;
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
new file mode 100644
index 000000000..559718997
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/renesas,sysc-rmobile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Mobile System Controller
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Magnus Damm <magnus.damm@gmail.com>
+
+description: |
+ The R-Mobile System Controller provides the following functions:
+ - Boot mode management,
+ - Reset generation,
+ - Power management.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,sysc-r8a73a4 # R-Mobile APE6
+ - renesas,sysc-r8a7740 # R-Mobile A1
+ - renesas,sysc-sh73a0 # SH-Mobile AG5
+ - const: renesas,sysc-rmobile # Generic SH/R-Mobile
+
+ reg:
+ items:
+ - description: Normally accessible register block
+ - description: Register block protected by the HPB semaphore
+
+ pm-domains:
+ type: object
+ description: |
+ This node contains a hierarchy of PM domain nodes, which should match the
+ Power Area Hierarchy in the Power Domain Specifications section of the
+ device's datasheet.
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ additionalProperties:
+ $ref: "#/$defs/pd-node"
+
+required:
+ - compatible
+ - reg
+ - pm-domains
+
+additionalProperties: false
+
+$defs:
+ pd-node:
+ type: object
+ description:
+ PM domain node representing a PM domain. This node hould be named by
+ the real power area name, and thus its name should be unique.
+
+ properties:
+ reg:
+ maxItems: 1
+ description:
+ If the PM domain is not always-on, this property must contain the
+ bit index number for the corresponding power area in the various
+ Power Control and Status Registers.
+ If the PM domain is always-on, this property must be omitted.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#power-domain-cells':
+ const: 0
+
+ required:
+ - '#power-domain-cells'
+
+ additionalProperties:
+ $ref: "#/$defs/pd-node"
+
+examples:
+ - |
+ // This shows a subset of the r8a7740 PM domain hierarchy, containing the
+ // C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP
+ // domain, which is a subdomain of A4S.
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+ reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+ pm-domains {
+ pd_c5: c5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a4s: a4s@10 {
+ reg = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <0>;
+
+ pd_a3sp: a3sp@11 {
+ reg = <11>;
+ #power-domain-cells = <0>;
+ };
+ };
+
+ pd_a4su: a4su@20 {
+ reg = <20>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/axxia-reset.txt b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt
new file mode 100644
index 000000000..47e720d24
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt
@@ -0,0 +1,20 @@
+Axxia Restart Driver
+
+This driver can do reset of the Axxia SoC. It uses the registers in the syscon
+block to initiate a chip reset.
+
+Required Properties:
+ -compatible: "lsi,axm55xx-reset"
+ -syscon: phandle to the syscon node.
+
+Example:
+
+ syscon: syscon@2010030000 {
+ compatible = "lsi,axxia-syscon", "syscon";
+ reg = <0x20 0x10030000 0 0x2000>;
+ };
+
+ reset: reset@2010031000 {
+ compatible = "lsi,axm55xx-reset";
+ syscon = <&syscon>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
new file mode 100644
index 000000000..93f31ca1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt
@@ -0,0 +1,14 @@
+Broadcom Kona Family Reset Manager
+----------------------------------
+
+The reset manager is used on the Broadcom BCM21664 SoC.
+
+Required properties:
+ - compatible: brcm,bcm21664-resetmgr
+ - reg: memory address & range
+
+Example:
+ brcm,resetmgr@35001f00 {
+ compatible = "brcm,bcm21664-resetmgr";
+ reg = <0x35001f00 0x24>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
new file mode 100644
index 000000000..7fec3e100
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt
@@ -0,0 +1,17 @@
+* Device-Tree bindings for Cortina Systems Gemini Poweroff
+
+This is a special IP block in the Cortina Gemini SoC that only
+deals with different ways to power the system down.
+
+Required properties:
+- compatible: should be "cortina,gemini-power-controller"
+- reg: should contain the physical memory base and size
+- interrupts: should contain the power management interrupt
+
+Example:
+
+power-controller@4b000000 {
+ compatible = "cortina,gemini-power-controller";
+ reg = <0x4b000000 0x100>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
new file mode 100644
index 000000000..45d66c775
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled power off
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: >
+ System power off support via a GPIO line. When a shutdown is
+ executed the operating system is expected to switch the GPIO
+ from inactive to active. After a delay (active-delay-ms) it
+ is expected to be switched back to inactive. After another
+ delay (inactive-delay-ms) it is configured as active again.
+ Finally the operating system assumes the power off failed if
+ the system is still running after waiting some time (timeout-ms).
+
+properties:
+ compatible:
+ const: gpio-poweroff
+
+ gpios:
+ maxItems: 1
+
+ input:
+ type: boolean
+ description: >
+ Initially configure the GPIO line as an input. Only reconfigure
+ it to an output when the power-off sequence is initiated. If this optional
+ property is not specified, the GPIO is initialized as an output in its inactive state.
+
+ active-delay-ms:
+ default: 100
+ description: Delay to wait after driving gpio active
+
+ inactive-delay-ms:
+ default: 100
+ description: Delay to wait after driving gpio inactive
+
+ timeout-ms:
+ default: 3000
+ description: Time to wait before assuming the power off sequence failed.
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 4 0>;
+ timeout-ms = <3000>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
new file mode 100644
index 000000000..a72d5c721
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled reset
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: >
+ Drive a GPIO line that can be used to restart the system from a restart handler.
+
+ This binding supports level and edge triggered reset. At driver load time, the driver will
+ request the given gpio line and install a restart handler. If the optional properties
+ 'open-source' is not found, the GPIO line will be driven in the inactive state. Otherwise its
+ not driven until the restart is initiated.
+
+ When the system is restarted, the restart handler will be invoked in priority order. The GPIO
+ is configured as an output, and driven active, triggering a level triggered reset condition.
+ This will also cause an inactive->active edge condition, triggering positive edge triggered
+ reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an
+ active->inactive edge, triggering negative edge triggered reset. After a delay specified by
+ inactive-delay, the GPIO is driven active again. After a delay specified by wait-delay, the
+ restart handler completes allowing other restart handlers to be attempted.
+
+properties:
+ compatible:
+ const: gpio-restart
+
+ gpios:
+ description: The GPIO to set high/low, see "gpios property" in
+ Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board
+ set it to "Active Low", otherwise set GPIO to "Active High".
+
+ open-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Treat the GPIO as being open source and defer driving it to when the restart is
+ initiated. If this optional property is not specified, the GPIO is initialized as an output
+ in its inactive state.
+
+ priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ A priority ranging from 0 to 255 (default 129) according to the following guidelines:
+
+ 0: Restart handler of last resort, with limited restart capabilities.
+ 128: Default restart handler; use if no other restart handler is expected to be available,
+ and/or if restart functionality is sufficient to restart the entire system.
+ 255: Highest priority restart handler, will preempt all other restart handlers.
+ minimum: 0
+ maximum: 255
+ default: 129
+
+ active-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Delay (default 100) to wait after driving gpio active [ms]
+ default: 100
+
+ inactive-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Delay (default 100) to wait after driving gpio inactive [ms]
+ default: 100
+
+ wait-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Delay (default 3000) to wait after completing restart sequence [ms]
+ default: 100
+
+additionalProperties: false
+
+required:
+ - compatible
+ - gpios
+
+examples:
+ - |
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 4 0>;
+ priority = <128>;
+ active-delay = <100>;
+ inactive-delay = <100>;
+ wait-delay = <3000>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
new file mode 100644
index 000000000..c5c03789e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
@@ -0,0 +1,67 @@
+* Device tree bindings for Texas Instruments keystone reset
+
+This node is intended to allow SoC reset in case of software reset
+of selected watchdogs.
+
+The Keystone SoCs can contain up to 4 watchdog timers to reset
+SoC. Each watchdog timer event input is connected to the Reset Mux
+block. The Reset Mux block can be configured to cause reset or not.
+
+Additionally soft or hard reset can be configured.
+
+Required properties:
+
+- compatible: ti,keystone-reset
+
+- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to
+ access pll controller registers and the offset to use
+ reset control registers.
+
+- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
+ access device state control registers and the offset
+ in order to use mux block registers for all watchdogs.
+
+Optional properties:
+
+- ti,soft-reset: Boolean option indicating soft reset.
+ By default hard reset is used.
+
+- ti,wdt-list: WDT list that can cause SoC reset. It's not related
+ to WDT driver, it's just needed to enable a SoC related
+ reset that's triggered by one of WDTs. The list is
+ in format: <0>, <2>; It can be in random order and
+ begins from 0 to 3, as keystone can contain up to 4 SoC
+ reset watchdogs and can be in random order.
+
+Example 1:
+Setup keystone reset so that in case software reset or
+WDT0 is triggered it issues hard reset for SoC.
+
+pllctrl: pll-controller@2310000 {
+ compatible = "ti,keystone-pllctrl", "syscon";
+ reg = <0x02310000 0x200>;
+};
+
+devctrl: device-state-control@2620000 {
+ compatible = "ti,keystone-devctrl", "syscon";
+ reg = <0x02620000 0x1000>;
+};
+
+rstctrl: reset-controller {
+ compatible = "ti,keystone-reset";
+ ti,syscon-pll = <&pllctrl 0xe4>;
+ ti,syscon-dev = <&devctrl 0x328>;
+ ti,wdt-list = <0>;
+};
+
+Example 2:
+Setup keystone reset so that in case of software reset or
+WDT0 or WDT2 is triggered it issues soft reset for SoC.
+
+rstctrl: reset-controller {
+ compatible = "ti,keystone-reset";
+ ti,syscon-pll = <&pllctrl 0xe4>;
+ ti,syscon-dev = <&devctrl 0x328>;
+ ti,wdt-list = <0>, <2>;
+ ti,soft-reset;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
new file mode 100644
index 000000000..38e54b3fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
@@ -0,0 +1,33 @@
+Binding for the LTC2952 PowerPath controller
+
+This chip is used to externally trigger a system shut down. Once the trigger has
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
+
+Required properties:
+
+- compatible: Must contain: "lltc,ltc2952"
+- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the
+ chip's watchdog line
+- kill-gpios: phandle + gpio-specifier for the GPIO connected to the
+ chip's kill line
+
+Optional properties:
+- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
+ chip's trigger line. If this property is not set, the
+ trigger function is ignored and the chip is kept alive
+ until an explicit kill signal is received
+- trigger-delay-ms The number of milliseconds to wait after trigger line
+ assertion before executing shut down procedure.
+ The default is 2500ms.
+
+Example:
+
+ltc2952 {
+ compatible = "lltc,ltc2952";
+
+ trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ trigger-delay-ms = <2000>;
+ watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 000000000..933f0c48e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+ "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+ pmic {
+ compatible = "mediatek,mt6323";
+
+ ...
+
+ power-controller {
+ compatible = "mediatek,mt6323-pwrc";
+ };
+ }
diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
new file mode 100644
index 000000000..752d6126d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
@@ -0,0 +1,26 @@
+NVMEM reboot mode driver
+
+This driver gets reboot mode magic value from reboot-mode driver
+and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
+can read it and take different action according to the magic
+value stored.
+
+Required properties:
+- compatible: should be "nvmem-reboot-mode".
+- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
+- nvmem-cell-names: Should be "reboot-mode".
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+ reboot-mode {
+ compatible = "nvmem-reboot-mode";
+ nvmem-cells = <&reboot_mode>;
+ nvmem-cell-names = "reboot-mode";
+
+ mode-normal = <0xAAAA5501>;
+ mode-bootloader = <0xBBBB5500>;
+ mode-recovery = <0xCCCC5502>;
+ mode-test = <0xDDDD5503>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
new file mode 100644
index 000000000..c5de7b555
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
@@ -0,0 +1,19 @@
+Microsemi Ocelot reset controller
+
+The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
+
+Required Properties:
+
+ - compatible: "mscc,ocelot-chip-reset", "mscc,luton-chip-reset",
+ "mscc,jaguar2-chip-reset" or "microchip,sparx5-chip-reset"
+
+Example:
+ reset@1070008 {
+ compatible = "mscc,ocelot-chip-reset";
+ reg = <0x1070008 0x4>;
+ };
+
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000..0b1eca734
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description: |
+ The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+ and resin along with the Android reboot-mode.
+
+ This DT node has pwrkey and resin as sub nodes.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8916-pon
+ - qcom,pms405-pon
+ - qcom,pm8998-pon
+ - qcom,pmk8350-pon
+
+ reg:
+ description: |
+ Specifies the SPMI base address for the PON (power-on) peripheral. For
+ PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+ (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+ peripherals. In that case, the PON_PBS address needs to be specified to
+ facilitate software debouncing on some PMIC.
+ minItems: 1
+ maxItems: 2
+
+ reg-names:
+ minItems: 1
+ maxItems: 2
+
+ pwrkey:
+ type: object
+ $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+ resin:
+ type: object
+ $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+ watchdog:
+ type: object
+ $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8916-pon
+ - qcom,pms405-pon
+ - qcom,pm8998-pon
+ then:
+ allOf:
+ - $ref: reboot-mode.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ items:
+ - const: pon
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pmk8350-pon
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ reg-names:
+ minItems: 1
+ items:
+ - const: hlos
+ - const: pbs
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/input/linux-event-codes.h>
+ #include <dt-bindings/spmi/spmi.h>
+ spmi_bus: spmi@c440000 {
+ reg = <0x0c440000 0x1100>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ pmk8350: pmic@0 {
+ reg = <0x0 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmk8350_pon: pon_hlos@1300 {
+ reg = <0x1300>;
+ compatible = "qcom,pm8998-pon";
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
new file mode 100644
index 000000000..527962d54
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC restart and power off
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets.
+ Clearing that bit allows us to restart/power off. The difference between
+ power off and restart is determined by unique power manager IC settings.
+
+properties:
+ compatible:
+ const: qcom,pshold
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ reset-controller@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
new file mode 100644
index 000000000..c363d7173
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt
@@ -0,0 +1,15 @@
+* QNAP Power Off
+
+QNAP NAS devices have a microcontroller controlling the main power
+supply. This microcontroller is connected to UART1 of the Kirkwood and
+Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
+microcontroller to turn the power off.
+
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
+Required Properties:
+- compatible: Should be "qnap,power-off" or "synology,power-off"
+
+- reg: Address and length of the register set for UART1
+- clocks: tclk clock
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
new file mode 100644
index 000000000..ad0a0b95c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+ - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+ This driver get reboot mode arguments and call the write
+ interface to store the magic value in special register
+ or ram. Then the bootloader can read it and take different
+ action according to the argument stored.
+
+ All mode properties are vendor specific, it is a indication to tell
+ the bootloader what to do when the system reboots, and should be named
+ as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+ For example, modes common Android platform are:
+ - normal: Normal reboot mode, system reboot with command "reboot".
+ - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+ - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+ - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+ usually used in development.
+
+properties:
+ mode-normal:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Default value to set on a reboot if no command was provided.
+
+patternProperties:
+ "^mode-.*$":
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+ - |
+ reboot-mode {
+ mode-normal = <0>;
+ mode-recovery = <1>;
+ mode-bootloader = <2>;
+ mode-loader = <3>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
new file mode 100644
index 000000000..e9417557c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/regulator-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Force-disable power regulator to turn the power off.
+
+maintainers:
+ - Michael Klein <michael@fossekall.de>
+
+description: |
+ When the power-off handler is called, a power regulator is disabled by
+ calling regulator_force_disable(). If the power is still on and the
+ CPU still running after a 3000ms delay, a warning is emitted.
+
+properties:
+ compatible:
+ const: regulator-poweroff
+
+ cpu-supply:
+ description:
+ regulator to disable on power-down
+
+required:
+ - compatible
+ - cpu-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ regulator-poweroff {
+ compatible = "regulator-poweroff";
+ cpu-supply = <&reg_vcc1v2>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
new file mode 100644
index 000000000..5776e684a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt
@@ -0,0 +1,8 @@
+* Restart Power Off
+
+Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off
+by restarting and letting u-boot keep hold of the machine until the
+user presses a button.
+
+Required Properties:
+- compatible: Should be "restart-poweroff"
diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt
new file mode 100644
index 000000000..b63948737
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt
@@ -0,0 +1,11 @@
+*Device-Tree bindings for ST SW reset functionality
+
+Required properties:
+- compatible: should be "stih407-restart".
+- st,syscfg: should be a phandle of the syscfg node.
+
+Example node:
+ restart {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
new file mode 100644
index 000000000..3412fe7e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register poweroff driver
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+ This is a generic poweroff driver using syscon to map the poweroff register.
+ The poweroff is generally performed with a write to the poweroff register
+ defined by the register map pointed by syscon reference plus the offset
+ with the value and mask defined in the poweroff node.
+ Default will be little endian mode, 32 bit access only.
+
+properties:
+ compatible:
+ const: syscon-poweroff
+
+ mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Update only the register bits defined by the mask (32 bit).
+
+ offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset in the register map for the poweroff register (in bytes).
+
+ regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the register map node.
+
+ value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The poweroff value written to the poweroff register (32 bit access).
+
+required:
+ - compatible
+ - regmap
+ - offset
+
+additionalProperties: false
+
+allOf:
+ - if:
+ not:
+ required:
+ - mask
+ then:
+ required:
+ - value
+
+examples:
+ - |
+ poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&regmapnode>;
+ offset = <0x0>;
+ mask = <0x7a>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
new file mode 100644
index 000000000..9b1ffceef
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON reboot mode driver
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ This driver gets reboot mode magic value from reboot-mode driver
+ and stores it in a SYSCON mapped register. Then the bootloader
+ can read it and take different action according to the magic
+ value stored. The SYSCON mapped register is retrieved from the
+ parental dt-node plus the offset. So the SYSCON reboot-mode node
+ should be represented as a sub-node of a "syscon", "simple-mfd" node.
+
+properties:
+ compatible:
+ const: syscon-reboot-mode
+
+ mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Update only the register bits defined by the mask (32 bit)
+
+ offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset in the register map for the mode register (in bytes)
+
+patternProperties:
+ "^mode-.+":
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+ - compatible
+ - offset
+
+examples:
+ - |
+ #include <dt-bindings/soc/rockchip,boot-mode.h>
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x40>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ mode-bootloader = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
new file mode 100644
index 000000000..da2509724
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register reset driver
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+ This is a generic reset driver using syscon to map the reset register.
+ The reset is generally performed with a write to the reset register
+ defined by the SYSCON register map base plus the offset with the value and
+ mask defined in the reboot node. Default will be little endian mode, 32 bit
+ access only. The SYSCON registers map is normally retrieved from the
+ parental dt-node. So the SYSCON reboot node should be represented as a
+ sub-node of a "syscon", "simple-mfd" node. Though the regmap property
+ pointing to the system controller node is also supported.
+
+properties:
+ compatible:
+ const: syscon-reboot
+
+ mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Update only the register bits defined by the mask (32 bit).
+
+ offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset in the register map for the reboot register (in bytes).
+
+ regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+ description: |
+ Phandle to the register map node. This property is deprecated in favor of
+ the syscon-reboot node been a child of a system controller node.
+
+ value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The reset value written to the reboot register (32 bit access).
+
+required:
+ - compatible
+ - offset
+
+additionalProperties: false
+
+allOf:
+ - if:
+ not:
+ required:
+ - mask
+ then:
+ required:
+ - value
+
+examples:
+ - |
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&regmapnode>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
new file mode 100644
index 000000000..46de35861
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/xlnx,zynqmp-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq MPSoC Power Management Device Tree Bindings
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+ The zynqmp-power node describes the power management configurations.
+ It will control remote suspend/shutdown interfaces.
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-power
+
+ interrupts:
+ maxItems: 1
+
+ mboxes:
+ description: |
+ Standard property to specify a Mailbox. Each value of
+ the mboxes property should contain a phandle to the
+ mailbox controller device node and an args specifier
+ that will be the phandle to the intended sub-mailbox
+ child node to be used for communication. See
+ Documentation/devicetree/bindings/mailbox/mailbox.txt
+ for more details about the generic mailbox controller
+ and client driver bindings. Also see
+ Documentation/devicetree/bindings/mailbox/ \
+ xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+ is used to communicate with this System controllers.
+ items:
+ - description: tx channel
+ - description: rx channel
+
+ mbox-names:
+ description:
+ Name given to channels seen in the 'mboxes' property.
+ items:
+ - const: tx
+ - const: rx
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |+
+
+ // Example with interrupt method:
+
+ firmware {
+ zynqmp-firmware {
+ zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupts = <0 35 4>;
+ };
+ };
+ };
+
+ - |+
+
+ // Example with IPI mailbox method:
+
+ firmware {
+ zynqmp-firmware {
+ zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ interrupt-parent = <&gic>;
+ interrupts = <0 35 4>;
+ mboxes = <&ipi_mailbox_pmu1 0>,
+ <&ipi_mailbox_pmu1 1>;
+ mbox-names = "tx", "rx";
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 000000000..0d5e999a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+ - Elaine Zhang <zhangqing@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ Rockchip processors include support for multiple power domains
+ which can be powered up/down by software based on different
+ application scenarios to save power.
+
+ Power domains contained within power-controller node are
+ generic power domain providers documented in
+ Documentation/devicetree/bindings/power/power-domain.yaml.
+
+ IP cores belonging to a power domain should contain a
+ "power-domains" property that is a phandle for the
+ power domain node representing the domain.
+
+properties:
+ $nodename:
+ const: power-controller
+
+ compatible:
+ enum:
+ - rockchip,px30-power-controller
+ - rockchip,rk3036-power-controller
+ - rockchip,rk3066-power-controller
+ - rockchip,rk3128-power-controller
+ - rockchip,rk3188-power-controller
+ - rockchip,rk3228-power-controller
+ - rockchip,rk3288-power-controller
+ - rockchip,rk3328-power-controller
+ - rockchip,rk3366-power-controller
+ - rockchip,rk3368-power-controller
+ - rockchip,rk3399-power-controller
+ - rockchip,rk3568-power-controller
+ - rockchip,rk3588-power-controller
+ - rockchip,rv1126-power-controller
+
+ "#power-domain-cells":
+ const: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - "#power-domain-cells"
+
+additionalProperties: false
+
+patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^power-domain@[0-9a-f]+$":
+
+ $ref: "#/$defs/pd-node"
+
+ unevaluatedProperties: false
+
+ properties:
+ "#power-domain-cells":
+ const: 0
+
+$defs:
+ pd-node:
+ type: object
+ description: |
+ Represents the power domains within the power controller node.
+
+ properties:
+ reg:
+ maxItems: 1
+ description: |
+ Power domain index. Valid values are defined in
+ "include/dt-bindings/power/px30-power.h"
+ "include/dt-bindings/power/rk3036-power.h"
+ "include/dt-bindings/power/rk3066-power.h"
+ "include/dt-bindings/power/rk3128-power.h"
+ "include/dt-bindings/power/rk3188-power.h"
+ "include/dt-bindings/power/rk3228-power.h"
+ "include/dt-bindings/power/rk3288-power.h"
+ "include/dt-bindings/power/rk3328-power.h"
+ "include/dt-bindings/power/rk3366-power.h"
+ "include/dt-bindings/power/rk3368-power.h"
+ "include/dt-bindings/power/rk3399-power.h"
+ "include/dt-bindings/power/rk3568-power.h"
+ "include/dt-bindings/power/rk3588-power.h"
+ "include/dt-bindings/power/rockchip,rv1126-power.h"
+
+ clocks:
+ minItems: 1
+ maxItems: 30
+ description: |
+ A number of phandles to clocks that need to be enabled
+ while power domain switches state.
+
+ pm_qos:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description: |
+ A number of phandles to qos blocks which need to be saved and restored
+ while power domain switches state.
+
+ "#power-domain-cells":
+ enum: [0, 1]
+ description:
+ Must be 0 for nodes representing a single PM domain and 1 for nodes
+ providing multiple PM domains.
+
+ required:
+ - reg
+ - "#power-domain-cells"
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3399-cru.h>
+ #include <dt-bindings/power/rk3399-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qos_hdcp: qos@ffa90000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa90000 0x0 0x20>;
+ };
+
+ qos_iep: qos@ffa98000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffa98000 0x0 0x20>;
+ };
+
+ qos_rga_r: qos@ffab0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0000 0x0 0x20>;
+ };
+
+ qos_rga_w: qos@ffab0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab0080 0x0 0x20>;
+ };
+
+ qos_video_m0: qos@ffab8000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffab8000 0x0 0x20>;
+ };
+
+ qos_video_m1_r: qos@ffac0000 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0000 0x0 0x20>;
+ };
+
+ qos_video_m1_w: qos@ffac0080 {
+ compatible = "rockchip,rk3399-qos", "syscon";
+ reg = <0x0 0xffac0080 0x0 0x20>;
+ };
+
+ power-management@ff310000 {
+ compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff310000 0x0 0x1000>;
+
+ power-controller {
+ compatible = "rockchip,rk3399-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_CENTER */
+ power-domain@RK3399_PD_IEP {
+ reg = <RK3399_PD_IEP>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>;
+ pm_qos = <&qos_iep>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_RGA {
+ reg = <RK3399_PD_RGA>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_rga_r>,
+ <&qos_rga_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VCODEC {
+ reg = <RK3399_PD_VCODEC>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video_m0>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VDU {
+ reg = <RK3399_PD_VDU>;
+ clocks = <&cru ACLK_VDU>,
+ <&cru HCLK_VDU>;
+ pm_qos = <&qos_video_m1_r>,
+ <&qos_video_m1_w>;
+ #power-domain-cells = <0>;
+ };
+ power-domain@RK3399_PD_VIO {
+ reg = <RK3399_PD_VIO>;
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@RK3399_PD_HDCP {
+ reg = <RK3399_PD_HDCP>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru HCLK_HDCP>,
+ <&cru PCLK_HDCP>;
+ pm_qos = <&qos_hdcp>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
new file mode 100644
index 000000000..d71fc72d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -0,0 +1,390 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SRAM for IO Voltage Domains
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ IO domain voltages on some Rockchip SoCs are variable but need to be
+ kept in sync between the regulators and the SoC using a special
+ register.
+
+ A specific example using rk3288
+ If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+ bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
+ that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+ Said another way, this driver simply handles keeping bits in the SoCs
+ General Register File (GRF) in sync with the actual value of a voltage
+ hooked up to the pins.
+
+ Note that this driver specifically does not include
+ any logic for deciding what voltage we should set regulators to
+ any logic for deciding whether regulators (or internal SoC blocks)
+ should have power or not have power
+
+ If there were some other software that had the smarts of making
+ decisions about regulators, it would work in conjunction with this
+ driver. When that other software adjusted a regulators voltage then
+ this driver would handle telling the SoC about it. A good example is
+ vqmmc for SD. In that case the dw_mmc driver simply is told about a
+ regulator. It changes the regulator between 3.3V and 1.8V at the
+ right time. This driver notices the change and makes sure that the
+ SoC is on the same page.
+
+ You specify supplies using the standard regulator bindings by including
+ a phandle the relevant regulator. All specified supplies must be able
+ to report their voltage. The IO Voltage Domain for any non-specified
+ supplies will be not be touched.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-io-voltage-domain
+ - rockchip,px30-pmu-io-voltage-domain
+ - rockchip,rk3188-io-voltage-domain
+ - rockchip,rk3228-io-voltage-domain
+ - rockchip,rk3288-io-voltage-domain
+ - rockchip,rk3328-io-voltage-domain
+ - rockchip,rk3368-io-voltage-domain
+ - rockchip,rk3368-pmu-io-voltage-domain
+ - rockchip,rk3399-io-voltage-domain
+ - rockchip,rk3399-pmu-io-voltage-domain
+ - rockchip,rk3568-pmu-io-voltage-domain
+ - rockchip,rv1108-io-voltage-domain
+ - rockchip,rv1108-pmu-io-voltage-domain
+ - rockchip,rv1126-pmu-io-voltage-domain
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: "#/$defs/px30"
+ - $ref: "#/$defs/px30-pmu"
+ - $ref: "#/$defs/rk3188"
+ - $ref: "#/$defs/rk3228"
+ - $ref: "#/$defs/rk3288"
+ - $ref: "#/$defs/rk3328"
+ - $ref: "#/$defs/rk3368"
+ - $ref: "#/$defs/rk3368-pmu"
+ - $ref: "#/$defs/rk3399"
+ - $ref: "#/$defs/rk3399-pmu"
+ - $ref: "#/$defs/rk3568-pmu"
+ - $ref: "#/$defs/rv1108"
+ - $ref: "#/$defs/rv1108-pmu"
+ - $ref: "#/$defs/rv1126-pmu"
+
+$defs:
+ px30:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio-oscgpi-supply:
+ description: The supply connected to VCCIO_OSCGPI.
+
+ px30-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+ pmuio2-supply:
+ description: The supply connected to PMUIO2.
+
+ rk3188:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3188-io-voltage-domain
+
+ then:
+ properties:
+ ap0-supply:
+ description: The supply connected to AP0_VCC.
+ ap1-supply:
+ description: The supply connected to AP1_VCC.
+ cif-supply:
+ description: The supply connected to CIF_VCC.
+ flash-supply:
+ description: The supply connected to FLASH_VCC.
+ lcdc0-supply:
+ description: The supply connected to LCD0_VCC.
+ lcdc1-supply:
+ description: The supply connected to LCD1_VCC.
+ vccio0-supply:
+ description: The supply connected to VCCIO0.
+ vccio1-supply:
+ description: The supply connected to VCCIO1. Also labeled as VCCIO2.
+
+ rk3228:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3228-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+
+ rk3288:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO4_VDD.
+ bb-supply:
+ description: The supply connected to APIO5_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ flash1-supply:
+ description: The supply connected to FLASH1_VDD. Also known as SDIO1.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO2_VDD.
+ lcdc-supply:
+ description: The supply connected to LCDC_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO3_VDD. Also known as SDIO0.
+
+ rk3328:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3328-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ pmuio-supply:
+ description: The supply connected to VCCIO_PMU.
+
+ rk3368:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO3_VDD.
+ dvp-supply:
+ description: The supply connected to DVPIO_VDD.
+ flash0-supply:
+ description: The supply connected to FLASH0_VDD. Typically for eMMC.
+ gpio30-supply:
+ description: The supply connected to APIO1_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdcard-supply:
+ description: The supply connected to SDMMC0_VDD.
+ wifi-supply:
+ description: The supply connected to APIO2_VDD. Also known as SDIO0.
+
+ rk3368-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3368-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+ vop-supply:
+ description: The supply connected to LCDC_VDD.
+
+ rk3399:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-io-voltage-domain
+
+ then:
+ properties:
+ audio-supply:
+ description: The supply connected to APIO5_VDD.
+ bt656-supply:
+ description: The supply connected to APIO2_VDD.
+ gpio1830-supply:
+ description: The supply connected to APIO4_VDD.
+ sdmmc-supply:
+ description: The supply connected to SDMMC0_VDD.
+
+ rk3399-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu1830-supply:
+ description: The supply connected to PMUIO2_VDD.
+
+ rk3568-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3568-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+ pmuio2-supply:
+ description: The supply connected to PMUIO2.
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio7-supply:
+ description: The supply connected to VCCIO7.
+
+ rv1108:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to APIO1_VDD.
+ vccio2-supply:
+ description: The supply connected to APIO2_VDD.
+ vccio3-supply:
+ description: The supply connected to APIO3_VDD.
+ vccio5-supply:
+ description: The supply connected to APIO5_VDD.
+ vccio6-supply:
+ description: The supply connected to APIO6_VDD.
+
+ rv1108-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1108-pmu-io-voltage-domain
+
+ then:
+ properties:
+ pmu-supply:
+ description: The supply connected to PMUIO_VDD.
+
+ rv1126-pmu:
+ if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rv1126-pmu-io-voltage-domain
+
+ then:
+ properties:
+ vccio1-supply:
+ description: The supply connected to VCCIO1.
+ vccio2-supply:
+ description: The supply connected to VCCIO2.
+ vccio3-supply:
+ description: The supply connected to VCCIO3.
+ vccio4-supply:
+ description: The supply connected to VCCIO4.
+ vccio5-supply:
+ description: The supply connected to VCCIO5.
+ vccio6-supply:
+ description: The supply connected to VCCIO6.
+ vccio7-supply:
+ description: The supply connected to VCCIO7.
+ pmuio0-supply:
+ description: The supply connected to PMUIO0.
+ pmuio1-supply:
+ description: The supply connected to PMUIO1.
+
+examples:
+ - |
+ io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ audio-supply = <&vcc18_codec>;
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_pmuio>;
+ lcdc-supply = <&vcc33_lcd>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc18_wl>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 000000000..5220d9cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: active-semi,act8945a-charger
+
+ interrupts:
+ maxItems: 1
+
+ active-semi,chglev-gpios:
+ maxItems: 1
+ description: charge current level GPIO
+
+ active-semi,lbo-gpios:
+ maxItems: 1
+ description: low battery voltage detect GPIO
+
+ active-semi,input-voltage-threshold-microvolt:
+ description: |
+ Specifies the charger's input over-voltage threshold value.
+ Despite the name, specified values are in millivolt (mV).
+ Defaults to 6.6 V
+ enum: [ 6600, 7000, 7500, 8000 ]
+
+ active-semi,precondition-timeout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the charger's PRECONDITION safety timer setting value in minutes.
+ If 0, it means to disable this timer.
+ Defaults to 40 minutes.
+ enum: [ 0, 40, 60, 80 ]
+
+ active-semi,total-timeout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the charger's total safety timer setting value in hours;
+ If 0, it means to disable this timer;
+ Defaults to 3 hours.
+ enum: [ 0, 3, 4, 5 ]
+
+required:
+ - compatible
+ - interrupts
+ - active-semi,chglev-gpios
+ - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ interrupt-parent = <&pioA>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+ active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
new file mode 100644
index 000000000..491488e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ The devicetree battery node provides static battery characteristics.
+ In smart batteries, these are typically stored in non-volatile memory
+ on a fuel gauge chip. The battery node should be used where there is
+ no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+ Upstream dts files should not include battery nodes, unless the battery
+ represented cannot easily be replaced in the system by one of a
+ different type. This prevents unpredictable, potentially harmful,
+ behavior should a replacement that changes the battery type occur
+ without a corresponding update to the dtb.
+
+ Battery properties are named, where possible, for the corresponding elements
+ in enum power_supply_property, defined in include/linux/power_supply.h
+
+ Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+ The phandle's property should be named "monitored-battery".
+
+properties:
+ compatible:
+ const: simple-battery
+
+ device-chemistry:
+ description: This describes the chemical technology of the battery.
+ oneOf:
+ - const: nickel-cadmium
+ - const: nickel-metal-hydride
+ - const: lithium-ion
+ description: This is a blanket type for all lithium-ion batteries,
+ including those below. If possible, a precise compatible string
+ from below should be used, but sometimes it is unknown which specific
+ lithium ion battery is employed and this wide compatible can be used.
+ - const: lithium-ion-polymer
+ - const: lithium-ion-iron-phosphate
+ - const: lithium-ion-manganese-oxide
+
+ over-voltage-threshold-microvolt:
+ description: battery over-voltage limit
+
+ re-charge-voltage-microvolt:
+ description: limit to automatically start charging again
+
+ voltage-min-design-microvolt:
+ description: drained battery voltage
+
+ voltage-max-design-microvolt:
+ description: fully charged battery voltage
+
+ energy-full-design-microwatt-hours:
+ description: battery design energy
+
+ charge-full-design-microamp-hours:
+ description: battery design capacity
+
+ trickle-charge-current-microamp:
+ description: current for trickle-charge phase
+
+ precharge-current-microamp:
+ description: current for pre-charge phase
+
+ precharge-upper-limit-microvolt:
+ description: limit when to change to constant charging
+
+ charge-term-current-microamp:
+ description: current for charge termination phase
+
+ constant-charge-current-max-microamp:
+ description: maximum constant input current
+
+ constant-charge-voltage-max-microvolt:
+ description: maximum constant input voltage
+
+ factory-internal-resistance-micro-ohms:
+ description: battery factory internal resistance
+
+ resistance-temp-table:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: the temperature in degree Celsius
+ - description: battery internal resistance percent
+ description: |
+ A table providing the temperature in degree Celsius
+ and corresponding battery internal resistance percent, which is used to
+ look up the resistance percent according to current temperature to get an
+ accurate batterty internal resistance in different temperatures.
+
+ ocv-capacity-celsius:
+ description: |
+ An array containing the temperature in degree Celsius,
+ for each of the battery capacity lookup table.
+
+ operating-range-celsius:
+ description: operating temperature range of a battery
+ items:
+ - description: minimum temperature at which battery can operate
+ - description: maximum temperature at which battery can operate
+
+ ambient-celsius:
+ description: safe range of ambient temperature
+ items:
+ - description: alert when ambient temperature is lower than this value
+ - description: alert when ambient temperature is higher than this value
+
+ alert-celsius:
+ description: safe range of battery temperature
+ items:
+ - description: alert when battery temperature is lower than this value
+ - description: alert when battery temperature is higher than this value
+
+required:
+ - compatible
+
+patternProperties:
+ '^ocv-capacity-table-[0-9]+$':
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ An array providing the open circuit voltage (OCV)
+ of the battery and corresponding battery capacity percent, which is used
+ to look up battery capacity according to current OCV value. And the open
+ circuit voltage unit is microvolt.
+ maxItems: 100
+ items:
+ items:
+ - description: open circuit voltage (OCV) in microvolts
+ - description: battery capacity percent
+ maximum: 100
+
+additionalProperties: false
+
+examples:
+ - |
+ power {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: battery {
+ compatible = "simple-battery";
+ over-voltage-threshold-microvolt = <4500000>;
+ re-charge-voltage-microvolt = <250000>;
+ voltage-min-design-microvolt = <3200000>;
+ voltage-max-design-microvolt = <4200000>;
+ energy-full-design-microwatt-hours = <5290000>;
+ charge-full-design-microamp-hours = <1430000>;
+ precharge-current-microamp = <256000>;
+ precharge-upper-limit-microvolt = <2500000>;
+ charge-term-current-microamp = <128000>;
+ constant-charge-current-max-microamp = <900000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <250000>;
+ ocv-capacity-celsius = <(-10) 0 10>;
+ /* table for -10 degree Celsius */
+ ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+ /* table for 0 degree Celsius */
+ ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+ /* table for 10 degree Celsius */
+ ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+ resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+ operating-range-celsius = <(-30) 50>;
+ ambient-celsius = <(-5) 50>;
+ alert-celsius = <0 40>;
+ };
+
+ charger@11 {
+ reg = <0x11>;
+ monitored-battery = <&battery>;
+ };
+
+ fuel-gauge@22 {
+ reg = <0x22>;
+ monitored-battery = <&battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
new file mode 100644
index 000000000..a3c00e078
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI bq2415x Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24150
+ - ti,bq24150a
+ - ti,bq24151
+ - ti,bq24151a
+ - ti,bq24152
+ - ti,bq24153
+ - ti,bq24153a
+ - ti,bq24155
+ - ti,bq24156
+ - ti,bq24156a
+ - ti,bq24158
+
+ reg:
+ maxItems: 1
+
+ ti,current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: initial maximum current charger can pull from power supply in mA.
+
+ ti,weak-battery-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage is below this value.
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage in mV.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current in mA.
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase drops
+ below this value (in mA).
+
+ ti,resistor-sense:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: value of sensing resistor in milliohm.
+
+ ti,usb-charger-detection:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to usb charger detection device (required for auto mode)
+
+required:
+ - compatible
+ - reg
+ - ti,current-limit
+ - ti,weak-battery-voltage
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+ - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
new file mode 100644
index 000000000..4884ec90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24190
+ - ti,bq24192
+ - ti,bq24192i
+ - ti,bq24196
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ usb-otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ Regulator that is used to control the VBUS voltage direction for
+ either USB host mode or for charging on the OTG port
+
+ ti,system-minimum-microvolt:
+ description: |
+ when power is connected and the battery is below minimum system voltage,
+ the system will be regulated above this setting.
+
+ omit-battery-class:
+ type: boolean
+ description: |
+ If this property is set, the operating system does not try to create a
+ battery device.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to a "simple-battery" compatible node.
+
+ This property must be a phandle to a node using the format described
+ in battery.yaml, with the following properties being required:
+ - precharge-current-microamp: maximum charge current during precharge phase
+ (typically 20% of battery capacity).
+ - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+ above recharge threshold, and the current is below this
+ setting (typically 10% of battery capacity).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bat: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <128000>;
+ };
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24190";
+ reg = <0x6a>;
+ interrupt-parent = <&gpiochip>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ monitored-battery = <&bat>;
+ ti,system-minimum-microvolt = <3200000>;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
new file mode 100644
index 000000000..c7406bef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24250
+ - ti,bq24251
+ - ti,bq24257
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage in uV
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current in uA
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase
+ drops below this value (in uA)
+
+ pg-gpios:
+ description: |
+ GPIO used for connecting the bq2425x device PG (Power Good) pin.
+ This pin is not available on all devices however it should be used if
+ possible as this is the recommended way to obtain the charger's input PG
+ state. If this pin is not specified a software-based approach for PG
+ detection is used.
+ maxItems: 1
+
+ ti,current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The maximum current to be drawn from the charger's input (in uA).
+ If this property is not specified, the input limit current is set
+ automatically using USB D+/D- signal based charger type detection.
+ If the hardware does not support the D+/D- based detection, a default
+ of 500,000 is used (=500mA) instead.
+
+ ti,ovp-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Configures the over voltage protection voltage (in uV).
+ If not specified a default of 6,5000,000 (=6.5V) is used.
+
+ ti,in-dpm-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Configures the threshold input voltage for the dynamic power path management (in uV).
+ If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24257";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+ pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <1000000>;
+ ti,termination-current = <50000>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24250";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <500000>;
+ ti,termination-current = <50000>;
+ ti,current-limit = <900000>;
+ ti,ovp-voltage = <9500000>;
+ ti,in-dpm-voltage = <4440000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 000000000..dd9176ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,bq24735
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: AC adapter plug event interrupt
+ maxItems: 1
+
+ ti,ac-detect-gpios:
+ maxItems: 1
+ description: |
+ This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+ that is configured as an input and connected to the ACOK pin on the bq24735.
+ Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+ absence despite ACOK being active (high) on AC adapter presence.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging current.
+ This value must be between 128mA and 8.128A with a 64mA step resolution.
+ The POR value is 0x0000h. This number is in mA (e.g. 8192).
+ See spec for more information about the ChargeCurrent (0x14h) register.
+
+ ti,charge-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging voltage.
+ This value must be between 1.024V and 19.2V with a 16mV step resolution.
+ The POR value is 0x0000h. This number is in mV (e.g. 19200).
+ See spec for more information about the ChargeVoltage (0x15h) register.
+
+ ti,input-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charger input current.
+ This value must be between 128mA and 8.064A with a 128mA step resolution.
+ The POR value is 0x1000h. This number is in mA (e.g. 8064).
+ See the spec for more information about the InputCurrent (0x3fh) register.
+
+ ti,external-control:
+ type: boolean
+ description: |
+ Indicates that the charger is configured externally and that the host should not
+ attempt to enable/disable charging or set the charge voltage/current.
+
+ poll-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ ti,ac-detect-gpios = <&gpio 72 0x1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
new file mode 100644
index 000000000..1a1b24003
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The BQ2515x family is a highly integrated battery charge management IC that
+ integrates the most common functions for wearable devices, namely a charger,
+ an output voltage rail, ADC for battery and system monitoring, and
+ push-button controller.
+
+ Specifications about the charger can be found at:
+ http://www.ti.com/lit/ds/symlink/bq25150.pdf
+ http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25150
+ - ti,bq25155
+
+ reg:
+ maxItems: 1
+ description: I2C address of the charger.
+
+ ac-detect-gpios:
+ description: |
+ GPIO used for connecting the bq2515x device PG (AC Detect)
+ pin.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO used for hardware reset.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO used for low power mode of IC.
+ maxItems: 1
+
+ charge-enable-gpios:
+ description: GPIO used to turn on and off charging.
+ maxItems: 1
+
+ input-current-limit-microamp:
+ description: Maximum input current in micro Amps.
+ minimum: 50000
+ maximum: 500000
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <50000>;
+ precharge-current-microamp = <2500>;
+ constant-charge-voltage-max-microvolt = <4000000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25150: charger@6b {
+ compatible = "ti,bq25150";
+ reg = <0x6b>;
+ monitored-battery = <&bat>;
+ input-current-limit-microamp = <100000>;
+
+ ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
new file mode 100644
index 000000000..82f382a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq256xx Switch Mode Buck Charger
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The bq256xx devices are a family of highly-integrated battery charge
+ management and system power management ICs for single cell Li-ion and Li-
+ polymer batteries.
+
+ Datasheets:
+ - https://www.ti.com/lit/ds/symlink/bq25600.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25601.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25618.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25619.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25600
+ - ti,bq25601
+ - ti,bq25600d
+ - ti,bq25601d
+ - ti,bq25611d
+ - ti,bq25618
+ - ti,bq25619
+
+ reg:
+ maxItems: 1
+
+ ti,watchdog-timeout-ms:
+ default: 0
+ description: |
+ Watchdog timer in ms. 0 (default) disables the watchdog
+ minimum: 0
+ maximum: 160000
+ enum: [ 0, 40000, 80000, 160000]
+
+ input-voltage-limit-microvolt:
+ description: |
+ Minimum input voltage limit in µV with a 100000 µV step
+ minimum: 3900000
+ maximum: 5400000
+
+ input-current-limit-microamp:
+ description: |
+ Maximum input current limit in µA with a 100000 µA step
+ minimum: 100000
+ maximum: 3200000
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Interrupt sends an active low, 256 μs pulse to host to report the charger
+ device status and faults.
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <2040000>;
+ constant-charge-voltage-max-microvolt = <4352000>;
+ precharge-current-microamp = <180000>;
+ charge-term-current-microamp = <180000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+
+ clock-frequency = <400000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "ti,bq25601";
+ reg = <0x6b>;
+ monitored-battery = <&bat>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,watchdog-timeout-ms = <40000>;
+
+ input-voltage-limit-microvolt = <4500000>;
+ input-current-limit-microamp = <2400000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
new file mode 100644
index 000000000..204c01471
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25890
+ - ti,bq25892
+ - ti,bq25895
+ - ti,bq25896
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage (in uV)
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current (in uA)
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase
+ drops below this value (in uA)
+
+ ti,precharge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charge current during precharge phase (in uA)
+
+ ti,minimum-sys-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ when battery is charging and it is below minimum system voltage,
+ the system will be regulated above minimum-sys-voltage setting (in uV)
+
+ ti,boost-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: VBUS voltage level in boost mode (in uV)
+
+ ti,boost-max-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum allowed current draw in boost mode (in uA)
+
+ ti,boost-low-freq:
+ description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+ type: boolean
+
+ ti,use-ilim-pin:
+ description: |
+ ILIM resistor will be used and the input current will be the lower
+ between the resistor setting and the IINLIM register setting
+ type: boolean
+
+ ti,thermal-regulation-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ temperature above which the charge current is lowered, to avoid overheating
+ (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+ ti,ibatcomp-micro-ohms:
+ description: value of a resistor in series with the battery (in Micro Ohms)
+
+ ti,ibatcomp-clamp-microvolt:
+ description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+ - ti,precharge-current
+ - ti,minimum-sys-voltage
+ - ti,boost-voltage
+ - ti,boost-max-current
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq25890";
+ reg = <0x6a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <1000000>;
+ ti,termination-current = <50000>;
+ ti,precharge-current = <128000>;
+ ti,minimum-sys-voltage = <3600000>;
+ ti,boost-voltage = <5000000>;
+ ti,boost-max-current = <1000000>;
+
+ ti,use-ilim-pin;
+ ti,thermal-regulation-threshold = <120>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 000000000..b687b8bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+ for use in high-power density portable electronics. These inductorless
+ switching chargers can provide over 97% efficiency by making use of the
+ switched capacitor architecture.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25980
+ - ti,bq25975
+ - ti,bq25960
+
+ reg:
+ maxItems: 1
+
+ ti,watchdog-timeout-ms:
+ description: |
+ Watchdog timer in milli seconds. 0 disables the watchdog.
+ default: 0
+ minimum: 0
+ maximum: 300000
+ enum: [ 0, 5000, 10000, 50000, 300000]
+
+ ti,sc-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 100000 micro volt step.
+ default: 17800000
+ minimum: 14000000
+ maximum: 22000000
+
+ ti,sc-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 50000 micro volt step.
+ minimum: 7000000
+ maximum: 12750000
+
+ ti,bypass-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-enable:
+ type: boolean
+ description: Enables bypass mode at boot time
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Indicates that the device state has changed.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <4000000>;
+ constant-charge-voltage-max-microvolt = <8400000>;
+ precharge-current-microamp = <160000>;
+ charge-term-current-microamp = <160000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25980: charger@65 {
+ compatible = "ti,bq25980";
+ reg = <0x65>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,watchdog-timeout-ms = <0>;
+ ti,sc-ocp-limit-microamp = <2000000>;
+ ti,sc-ovp-limit-microvolt = <17800000>;
+ monitored-battery = <&bat>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 000000000..65fc6049e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+ - Pali Rohár <pali@kernel.org>
+ - Andrew F. Davis <afd@ti.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Support various Texas Instruments fuel gauge devices that share similar
+ register maps and power supply properties
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq27200
+ - ti,bq27210
+ - ti,bq27500 # deprecated, use revision specific property below
+ - ti,bq27510 # deprecated, use revision specific property below
+ - ti,bq27520 # deprecated, use revision specific property below
+ - ti,bq27500-1
+ - ti,bq27510g1
+ - ti,bq27510g2
+ - ti,bq27510g3
+ - ti,bq27520g1
+ - ti,bq27520g2
+ - ti,bq27520g3
+ - ti,bq27520g4
+ - ti,bq27521
+ - ti,bq27530
+ - ti,bq27531
+ - ti,bq27541
+ - ti,bq27542
+ - ti,bq27546
+ - ti,bq27742
+ - ti,bq27545
+ - ti,bq27411
+ - ti,bq27421
+ - ti,bq27425
+ - ti,bq27426
+ - ti,bq27441
+ - ti,bq27621
+ - ti,bq27z561
+ - ti,bq28z610
+ - ti,bq34z100
+ - ti,bq78z100
+
+ reg:
+ maxItems: 1
+ description: integer, I2C address of the fuel gauge.
+
+ monitored-battery:
+ description: |
+ phandle of battery characteristics node.
+ The fuel gauge uses the following battery properties:
+ - energy-full-design-microwatt-hours
+ - charge-full-design-microamp-hours
+ - voltage-min-design-microvolt
+ Both or neither of the *-full-design-*-hours properties must be set.
+ See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+ power-supplies: true
+
+required:
+ - compatible
+ - reg
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bat: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <5290000>;
+ charge-full-design-microamp-hours = <1430000>;
+ };
+
+ bq27510g3: fuel-gauge@55 {
+ compatible = "ti,bq27510g3";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
new file mode 100644
index 000000000..5af1e0bea
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Binding for the legacy charger manager driver.
+ Please do not use for new products.
+
+properties:
+ compatible:
+ const: charger-manager
+
+ cm-chargers:
+ description: name of chargers
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ cm-num-chargers:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+
+ cm-fuel-gauge:
+ description: name of battery fuel gauge
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-name:
+ description: name of the charger manager
+ default: battery
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-poll-mode:
+ description: polling mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ enum:
+ - 0 # disabled
+ - 1 # always
+ - 2 # when external power is connected
+ - 3 # when charging
+
+ cm-poll-interval:
+ description: polling interval (in ms)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-stat:
+ description: battery status
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # battery always present
+ - 1 # no battery
+ - 2 # check presence via fuel gauge
+ - 3 # check presence via charger
+
+ cm-fullbatt-vchkdrop-volt:
+ description: voltage drop before restarting charging in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-vchkdrop-ms:
+ deprecated: true
+
+ cm-fullbatt-voltage:
+ description: voltage of full battery in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-soc:
+ description: state of charge to consider as full battery in %
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-capacity:
+ description: capcity to consider as full battery in uAh
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-thermal-zone:
+ description: name of external thermometer's thermal zone
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-discharging-max:
+ description: limits of discharging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-charging-max:
+ description: limits of charging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold:
+ description: critical cold temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold-in-minus:
+ description: if set cm-battery-cold temperature is in minus degrees
+ type: boolean
+
+ cm-battery-hot:
+ description: critical hot temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-temp-diff:
+ description: temperature difference to allow recharging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "-supply$":
+ description: regulator consumer, named according to cm-regulator-name
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ "^regulator[@-][0-9]$":
+ type: object
+ properties:
+ cm-regulator-name:
+ description: name of charger regulator
+ $ref: /schemas/types.yaml#/definitions/string
+
+ required:
+ - cm-regulator-name
+
+ additionalProperties: false
+
+ patternProperties:
+ "^cable[@-][0-9]$":
+ type: object
+ properties:
+ cm-cable-name:
+ description: name of charger cable
+ enum:
+ - USB
+ - USB-HOST
+ - SDP
+ - DCP
+ - CDP
+ - ACA
+ - FAST-CHARGER
+ - SLOW-CHARGER
+ - WPT
+ - PD
+ - DOCK
+ - JIG
+ - MECHANICAL
+
+ cm-cable-extcon:
+ description: name of extcon dev
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-cable-min:
+ description: minimum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-cable-max:
+ description: maximum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - cm-cable-name
+ - cm-cable-extcon
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - cm-chargers
+ - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+ - |
+ charger-manager {
+ compatible = "charger-manager";
+ chg-reg-supply = <&charger_regulator>;
+
+ cm-name = "battery";
+ /* Always polling ON : 30s */
+ cm-poll-mode = <1>;
+ cm-poll-interval = <30000>;
+
+ cm-fullbatt-vchkdrop-volt = <150000>;
+ cm-fullbatt-soc = <100>;
+
+ cm-battery-stat = <3>;
+
+ cm-chargers = "charger0", "charger1", "charger2";
+
+ cm-fuel-gauge = "fuelgauge0";
+
+ cm-thermal-zone = "thermal_zone.1";
+ /* in deci centigrade */
+ cm-battery-cold = <50>;
+ cm-battery-cold-in-minus;
+ cm-battery-hot = <800>;
+ cm-battery-temp-diff = <100>;
+
+ /* Allow charging for 5hr */
+ cm-charging-max = <18000000>;
+ /* Allow discharging for 2hr */
+ cm-discharging-max = <7200000>;
+
+ regulator-0 {
+ cm-regulator-name = "chg-reg";
+ cable-0 {
+ cm-cable-name = "USB";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <475000>;
+ cm-cable-max = <500000>;
+ };
+ cable-1 {
+ cm-cable-name = "SDP";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <650000>;
+ cm-cable-max = <675000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 000000000..694bfdb58
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+ the Droid 4. This binding describes its battery fuel gauge
+ sub-function.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: motorola,cpcap-battery
+
+ interrupts:
+ items:
+ - description: eol interrupt
+ - description: low battery percentage interrupt
+ - description: critical battery percentage interrupt
+ - description: charger detect interrupt
+ - description: battery detect interrupt
+ - description: coulomb counter calibration interrupt
+
+ interrupt-names:
+ items:
+ - const: eol
+ - const: lowbph
+ - const: lowbpl
+ - const: chrgcurr1
+ - const: battdetb
+ - const: cccal
+
+ io-channels:
+ items:
+ - description: battery temperature
+ - description: battery voltage
+ - description: battery charge current
+ - description: battery current
+
+ io-channel-names:
+ items:
+ - const: battdetb
+ - const: battp
+ - const: chg_isense
+ - const: batti
+
+ power-supplies: true
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+ - power-supplies
+
+additionalProperties: false
+
+examples:
+ - |
+ cpcap {
+ battery {
+ compatible = "motorola,cpcap-battery";
+ interrupts-extended =
+ <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+ <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+ interrupt-names =
+ "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb", "cccal";
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 5>, <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "chg_isense", "batti";
+ power-supplies = <&cpcap_charger>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 000000000..7e6bf30a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+ the Droid 4. This binding describes its battery charger
+ sub-function.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: motorola,mapphone-cpcap-charger
+
+ interrupts:
+ items:
+ - description: charger detection interrupt
+ - description: reverse charge interrupt
+ - description: SE1 charger detection interrupt
+ - description: SE0 charger detection interrupt
+ - description: reverse mode interrupt
+ - description: charge current 2 interrupt
+ - description: charge current 1 interrupt
+ - description: VBUS valid interrupt
+ - description: battery detect interrupt
+
+ interrupt-names:
+ items:
+ - const: chrg_det
+ - const: rvrs_chrg
+ - const: chrg_se1b
+ - const: se0conn
+ - const: rvrs_mode
+ - const: chrgcurr2
+ - const: chrgcurr1
+ - const: vbusvld
+ - const: battdetb
+
+ io-channels:
+ items:
+ - description: battery temperature
+ - description: battery voltage
+ - description: VBUS voltage
+ - description: battery charge current
+ - description: battery current
+
+ io-channel-names:
+ items:
+ - const: battdetb
+ - const: battp
+ - const: vbus
+ - const: chg_isense
+ - const: batti
+
+ mode-gpios:
+ description: |
+ Optionally CPCAP charger can have a companion wireless
+ charge controller that is controlled with two GPIOs
+ that are active low.
+ minItems: 2
+ maxItems: 2
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ cpcap {
+ charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended =
+ <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+ <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+ <&cpcap 54 0>;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+ "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 2>, <&cpcap_adc 5>,
+ <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 000000000..dc697b614
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+ - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+ The driver can utilize information from a simple-battery linked via a
+ phandle in monitored-battery. If specified the driver uses the
+ charge-full-design-microamp-hours property of the battery.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: cellwise,cw2015
+
+ reg:
+ maxItems: 1
+
+ cellwise,battery-profile:
+ description: |
+ This property specifies characteristics of the battery used. The format
+ of this binary blob is kept secret by CellWise. The only way to obtain
+ it is to mail two batteries to a test facility of CellWise and receive
+ back a test report with the binary blob.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 64
+ maxItems: 64
+
+ cellwise,monitor-interval-ms:
+ description:
+ Specifies the interval in milliseconds gauge values are polled at
+ minimum: 250
+
+ power-supplies:
+ minItems: 1
+ maxItems: 8 # Should be enough
+
+ monitored-battery:
+ description:
+ Specifies the phandle of a simple-battery connected to this gauge
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cw2015@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+ cellwise,battery-profile = /bits/ 8 <
+ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+ >;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&bat>;
+ power-supplies = <&mains_charger>, <&usb_charger>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 000000000..b28938895
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Charger Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: dlg,da9150-charger
+
+ io-channels:
+ items:
+ - description: ADC channel for current
+ - description: ADC channel for bus voltage
+ - description: ADC channel for junction temperature
+ - description: ADC channel for battery voltage
+
+ io-channel-names:
+ items:
+ - const: CHAN_IBUS
+ - const: CHAN_VBUS
+ - const: CHAN_TJUNC
+ - const: CHAN_VBAT
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "dlg,da9150-charger";
+ io-channels = <&gpadc 0>,
+ <&gpadc 2>,
+ <&gpadc 8>,
+ <&gpadc 5>;
+ io-channel-names = "CHAN_IBUS",
+ "CHAN_VBUS",
+ "CHAN_TJUNC",
+ "CHAN_VBAT";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 000000000..d47caf59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: dlg,da9150-fuel-gauge
+
+ dlg,update-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Interval time (milliseconds) between battery level checks.
+
+ dlg,warn-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 100
+ description: Battery discharge level (%) where warning event raised.
+
+ dlg,crit-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 100
+ description: |
+ Battery discharge level (%) where critical event raised.
+ This value should be lower than the warning level.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ battery {
+ compatible = "dlg,da9150-fuel-gauge";
+ dlg,update-interval = <10000>;
+ dlg,warn-soc-level = /bits/ 8 <15>;
+ dlg,crit-soc-level = /bits/ 8 <5>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
new file mode 100644
index 000000000..89f8e2bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description:
+ This binding is for all chargers, which are working more or less
+ autonomously, only providing some status GPIOs and possibly some
+ GPIOs for limited control over the charging process.
+
+properties:
+ compatible:
+ const: gpio-charger
+
+ charger-type:
+ enum:
+ - unknown
+ - battery
+ - ups
+ - mains
+ - usb-sdp # USB standard downstream port
+ - usb-dcp # USB dedicated charging port
+ - usb-cdp # USB charging downstream port
+ - usb-aca # USB accessory charger adapter
+ description:
+ Type of the charger, e.g. "mains" for a wall charger.
+
+ gpios:
+ maxItems: 1
+ description: GPIO indicating the charger presence
+
+ charge-status-gpios:
+ maxItems: 1
+ description: GPIO indicating the charging status
+
+ charge-current-limit-gpios:
+ minItems: 1
+ maxItems: 32
+ description: GPIOs used for current limiting
+
+ charge-current-limit-mapping:
+ description: List of tuples with current in uA and a GPIO bitmap (in
+ this order). The tuples must be provided in descending order of the
+ current limit.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description:
+ Current limit in uA
+ - description:
+ Encoded GPIO setting. Bit 0 represents last GPIO from the
+ charge-current-limit-gpios property. Bit 1 second to last
+ GPIO and so on.
+
+required:
+ - compatible
+
+anyOf:
+ - required:
+ - gpios
+ - required:
+ - charge-status-gpios
+ - required:
+ - charge-current-limit-gpios
+
+dependencies:
+ charge-current-limit-gpios: [ charge-current-limit-mapping ]
+ charge-current-limit-mapping: [ charge-current-limit-gpios ]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-sdp";
+
+ gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+ charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+ charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+ <&gpioA 12 GPIO_ACTIVE_HIGH>;
+ charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+ <700000 0x01>, // 700 mA => GPIO A.12 high
+ <0 0x02>; // 0 mA => GPIO A.11 high
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 000000000..46527038b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+ - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+ compatible:
+ oneOf:
+ - const: ingenic,jz4740-battery
+ - items:
+ - enum:
+ - ingenic,jz4725b-battery
+ - ingenic,jz4770-battery
+ - const: ingenic,jz4740-battery
+
+ io-channels:
+ maxItems: 1
+
+ io-channel-names:
+ const: battery
+
+ monitored-battery:
+ description: >
+ phandle to a "simple-battery" compatible node.
+
+ This property must be a phandle to a node using the format described
+ in battery.yaml, with the following properties being required:
+ - voltage-min-design-microvolt: drained battery voltage,
+ - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+ simple_battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3600000>;
+ voltage-max-design-microvolt = <4200000>;
+ };
+
+ ingenic-battery {
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ monitored-battery = <&simple_battery>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
new file mode 100644
index 000000000..7e3449ed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for NXP ISP1704 USB Charger Detection
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: nxp,isp1704
+
+ nxp,enable-gpio:
+ maxItems: 1
+ description: GPIO connected to the chip's enable pin
+
+ usb-phy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: USB PHY the ISP1704 is connected to
+
+required:
+ - compatible
+ - nxp,enable-gpio
+ - usb-phy
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger-detect {
+ compatible = "nxp,isp1704";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ usb-phy = <&usb2_phy>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 000000000..a99d989f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+ It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+ detected by a key switch in the battery compartment.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: lego,ev3-battery
+
+ io-channels:
+ items:
+ - description: ADC channel for battery voltage
+ - description: ADC channel for battery current
+
+ io-channel-names:
+ items:
+ - const: voltage
+ - const: current
+
+ rechargeable-gpios:
+ maxItems: 1
+ description: Rechargeable battery indication gpio
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ battery {
+ compatible = "lego,ev3-battery";
+ io-channels = <&adc 4>, <&adc 3>;
+ io-channel-names = "voltage", "current";
+ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 000000000..76cedf95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3651 Charger Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - lltc,lt3651-charger
+ - lltc,ltc3651-charger # deprecated, use lltc,lt3651-charger
+
+ lltc,acpr-gpios:
+ maxItems: 1
+
+ lltc,fault-gpios:
+ maxItems: 1
+
+ lltc,chrg-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger {
+ compatible = "lltc,lt3651-charger";
+ lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+ lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+ lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 000000000..109b41a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+ All chips measure battery capacity.
+ The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+ temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+ are software compatible, uses a slightly different conversion formula
+ for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2941
+ - lltc,ltc2942
+ - lltc,ltc2943
+ - lltc,ltc2944
+
+ reg:
+ maxItems: 1
+
+ lltc,resistor-sense:
+ $ref: /schemas/types.yaml#/definitions/int32
+ description: |
+ Sense resistor value in milli-ohms.
+ Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+ lltc,prescaler-exponent:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The prescaler exponent as explained in the datasheet.
+ This determines the range and accuracy of the gauge.
+ The value is programmed into the chip only if it differs from the current setting.
+ The setting is lost when the battery is disconnected.
+
+required:
+ - compatible
+ - reg
+ - lltc,resistor-sense
+ - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ battery@64 {
+ compatible = "lltc,ltc2943";
+ reg = <0x64>;
+ lltc,resistor-sense = <15>;
+ lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 000000000..cfffaeef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+ - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+ The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+ battery charger and PowerPath (TM) manager that seamlessly manages power
+ distribution between input sources such as wall adapters, backplanes, solar
+ panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+ Specifications about the charger can be found at:
+ https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc4162-l
+
+ reg:
+ maxItems: 1
+ description: I2C address of the charger.
+
+ lltc,rsnsb-micro-ohms:
+ description: Battery sense resistor in microohm.
+ minimum: 1000
+
+ lltc,rsnsi-micro-ohms:
+ description: Input current sense resistor in microohm.
+ minimum: 1000
+
+ lltc,cell-count:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of battery cells. If not provided, will be obtained from the chip
+ once the external power is applied. Omit this when the number of cells
+ is somewhat dynamic. Without it, several measurements will return 0 until
+ the charger is connected to an external supply.
+
+required:
+ - compatible
+ - reg
+ - lltc,rsnsb-micro-ohms
+ - lltc,rsnsi-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ charger: battery-charger@68 {
+ compatible = "lltc,ltc4162-l";
+ reg = <0x68>;
+ lltc,rsnsb-micro-ohms = <10000>;
+ lltc,rsnsi-micro-ohms = <16000>;
+ lltc,cell-count = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 000000000..62eeddb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+ compatible:
+ const: maxim,max77650-charger
+
+ input-voltage-min-microvolt:
+ description:
+ Minimum CHGIN regulation voltage.
+ enum: [ 4000000, 4100000, 4200000, 4300000,
+ 4400000, 4500000, 4600000, 4700000 ]
+
+ input-current-limit-microamp:
+ description:
+ CHGIN input current limit (in microamps).
+ enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+ - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/max8925_battery.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
new file mode 100644
index 000000000..d7e3e0c0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+ charger {
+ batt-detect = <0>;
+ topoff-threshold = <1>;
+ fast-charge = <7>;
+ no-temp-support = <0>;
+ no-insert-detect = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 000000000..c838efcf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim DS2760 DT bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ The ds2760 is a w1 slave device and must hence have its sub-node in
+ DT under a w1 bus master node.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,ds2760
+
+ maxim,pmod-enabled:
+ description: |
+ Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+ and leave sleep Mode when the DQ line goes high.
+ type: boolean
+
+ maxim,cache-time-ms:
+ description: |
+ Time im milliseconds to cache the data for.
+ When this time expires, the values are read again from the hardware.
+ Defaults to 1000.
+
+ rated-capacity-microamp-hours:
+ description: |
+ The rated capacity of the battery, in mAh.
+ If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+ - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 000000000..4d3a1d090
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+ Integrated Circuit (MUIC).
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - maxim,max14577-charger
+ - maxim,max77836-charger
+
+ maxim,constant-uvolt:
+ description:
+ Battery Constant Voltage in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 4000000
+ maximum: 4350000
+
+ maxim,eoc-uamp:
+ description: |
+ Current in uA for End-Of-Charge mode.
+ MAX14577: 50000-20000
+ MAX77836: 5000-100000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ maxim,fast-charge-uamp:
+ description: |
+ Current in uA for Fast Charge
+ MAX14577: 90000-950000
+ MAX77836: 45000-475000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ maxim,ovp-uvolt:
+ description:
+ OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+ asserts and charging stops.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+ - compatible
+ - maxim,constant-uvolt
+ - maxim,eoc-uamp
+ - maxim,fast-charge-uamp
+ - maxim,ovp-uvolt
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max14577-charger
+ then:
+ properties:
+ maxim,eoc-uamp:
+ minimum: 50000
+ maximum: 200000
+ maxim,fast-charge-uamp:
+ minimum: 90000
+ maximum: 950000
+ else:
+ # max77836
+ properties:
+ maxim,eoc-uamp:
+ minimum: 5000
+ maximum: 100000
+ maxim,fast-charge-uamp:
+ minimum: 45000
+ maximum: 475000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 000000000..070ef6f96
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14656 DT bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max14656
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger-detector@35 {
+ compatible = "maxim,max14656";
+ reg = <0x35>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 000000000..3a529326e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max17040
+ - maxim,max17041
+ - maxim,max17043
+ - maxim,max17044
+ - maxim,max17048
+ - maxim,max17049
+ - maxim,max17058
+ - maxim,max17059
+ - maxim,max77836-battery
+
+ reg:
+ maxItems: 1
+
+ maxim,alert-low-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ description: |
+ The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+ If skipped the power up default value of 4 (%) will be used.
+
+ maxim,double-soc:
+ type: boolean
+ description: |
+ Certain devices return double the capacity.
+ Specify this to divide the reported value in 2 and thus normalize it.
+ SoC == State of Charge == Capacity.
+
+ maxim,rcomp:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 2
+ description: |
+ A value to compensate readings for various battery chemistries and operating temperatures.
+ max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+ All other devices have one byte rcomp, default to 0x97.
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: |
+ Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+ maxim,rcomp = /bits/ 8 <0x56>;
+ maxim,alert-low-soc-level = <10>;
+ maxim,double-soc;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max77836-battery";
+ reg = <0x36>;
+ maxim,alert-low-soc-level = <10>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 000000000..aff5d0792
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max17042
+ - maxim,max17047
+ - maxim,max17050
+ - maxim,max17055
+ - maxim,max77849-battery
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: |
+ The ALRT pin, an open-drain interrupt.
+
+ maxim,rsns-microohm:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+ Defining this property enables current-sense functionality.
+
+ maxim,cold-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as cold (in tenths of degree Celsius).
+ Default is not to report cold events.
+
+ maxim,over-heat-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+ Default is not to report over heating events.
+
+ maxim,dead-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as dead (in mV).
+ Default is not to report dead battery events.
+
+ maxim,over-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as over voltage (in mV).
+ Default is not to report over-voltage events.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max17042";
+ reg = <0x36>;
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4300>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000..f5fd53deb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+ Circuit (MUIC).
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ const: maxim,max77693-charger
+
+ maxim,constant-microvolt:
+ description: |
+ Battery constant voltage in uV. The charger will operate in fast
+ charge constant current mode till battery voltage reaches this level.
+ Then the charger will switch to fast charge constant voltage mode.
+ Also vsys (system voltage) will be set to this value when DC power is
+ supplied but charger is not enabled.
+ Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+ minimum: 3650000
+ maximum: 4400000
+ default: 4200000
+
+ maxim,min-system-microvolt:
+ description: |
+ Minimal system voltage in uV.
+ enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+ 3600000, 3700000]
+ default: 3600000
+
+ maxim,thermal-regulation-celsius:
+ description: |
+ Temperature in Celsius for entering high temperature charging mode.
+ If die temperature exceeds this value the charging current will be
+ reduced by 105 mA/Celsius.
+ enum: [70, 85, 100, 115]
+ default: 100
+
+ maxim,battery-overcurrent-microamp:
+ description: |
+ Overcurrent protection threshold in uA (current from battery to
+ system).
+ Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+ minimum: 2000000
+ maximum: 3500000
+ default: 3500000
+
+ maxim,charge-input-threshold-microvolt:
+ description: |
+ Threshold voltage in uV for triggering input voltage regulation loop.
+ If input voltage decreases below this value, the input current will
+ be reduced to reach the threshold voltage.
+ enum: [4300000, 4700000, 4800000, 4900000]
+ default: 4300000
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 000000000..f23dcc507
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+ The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+ configured via I2C.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max77976
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "maxim,max77976";
+ reg = <0x6b>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 000000000..a8d625f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max8903
+
+ dok-gpios:
+ maxItems: 1
+ description: Valid DC power has been detected (active low, input)
+
+ uok-gpios:
+ maxItems: 1
+ description: Valid USB power has been detected (active low, input)
+
+ cen-gpios:
+ maxItems: 1
+ description: Charge enable pin (active low, output)
+
+ chg-gpios:
+ maxItems: 1
+ description: Charger status pin (active low, input)
+
+ flt-gpios:
+ maxItems: 1
+ description: Fault pin (active low, output)
+
+ dcm-gpios:
+ maxItems: 1
+ description: Current limit mode setting (DC=1 or USB=0, output)
+
+ usus-gpios:
+ maxItems: 1
+ description: USB suspend pin (active high, output)
+
+required:
+ - compatible
+
+anyOf:
+ - required:
+ - dok-gpios
+ - required:
+ - uok-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger {
+ compatible = "maxim,max8903";
+ dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 000000000..fd491c598
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+ - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6370-charger
+
+ interrupts:
+ description: |
+ Specify what irqs are needed to be handled by MT6370 Charger driver.
+ We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+ is plugged in, and then the driver will enable BC1.2 detection.
+ After the hardware of MT6370 completes the BC1.2 detection,
+ IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+ the result of BC1.2 detection.
+ When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+ hardware enters the "Minimum Input Voltage Regulation loop" and
+ a workaround needs to be applied at this time.
+ In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+ "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+ items:
+ - description: irq of "USB is plugged in"
+ - description: irq of "BC1.2 is done"
+ - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+ interrupt-names:
+ items:
+ - const: uvp_d_evt
+ - const: attach_i
+ - const: mivr
+
+ io-channels:
+ description: |
+ Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+ minItems: 1
+ items:
+ - description: |
+ VBUS voltage with lower accuracy (+-75mV) but higher measure
+ range (1~22V)
+ - description: |
+ VBUS voltage with higher accuracy (+-30mV) but lower measure
+ range (1~9.76V)
+ - description: the main system input voltage
+ - description: battery voltage
+ - description: battery temperature-sense input voltage
+ - description: IBUS current (required)
+ - description: battery current
+ - description: |
+ regulated output voltage to supply for the PWM low-side gate driver
+ and the bootstrap capacitor
+ - description: IC junction temperature
+
+ io-channel-names:
+ minItems: 1
+ items:
+ - const: vbusdiv5
+ - const: vbusdiv2
+ - const: vsys
+ - const: vbat
+ - const: ts_bat
+ - const: ibus
+ - const: ibat
+ - const: chg_vddp
+ - const: temp_jc
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ unevaluatedProperties: false
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 000000000..b9bd1591e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ const: microchip,ucs1002
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ oneOf:
+ - items:
+ - const: a_det
+ - const: alert
+ - const: a_det
+ - const: alert
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@32 {
+ compatible = "microchip,ucs1002";
+ reg = <0x32>;
+ interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+ <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "a_det", "alert";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
new file mode 100644
index 000000000..b89b15a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ This module is part of the MT6360 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6360-chg
+
+ richtek,vinovp-microvolt:
+ description: Maximum CHGIN regulation voltage in uV.
+ enum: [ 5500000, 6500000, 11000000, 14500000 ]
+
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ $ref: /schemas/regulator/regulator.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ mt6360_charger: charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 000000000..5178e6207
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia N900 battery
+
+maintainers:
+ - Pali Rohár <pali@kernel.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: nokia,n900-battery
+
+ io-channels:
+ items:
+ - description: ADC channel for temperature reading
+ - description: ADC channel for battery size identification
+ - description: ADC channel to measure the battery voltage
+
+ io-channel-names:
+ items:
+ - const: temp
+ - const: bsi
+ - const: vbat
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl4030_madc 0>,
+ <&twl4030_madc 4>,
+ <&twl4030_madc 12>;
+ io-channel-names = "temp",
+ "bsi",
+ "vbat";
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 000000000..dd89e2532
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC Battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: olpc,xo1.5-battery
+ - const: olpc,xo1-battery
+ - items:
+ - const: olpc,xo1-battery
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
new file mode 100644
index 000000000..2f672e6e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Supply Core Support
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ power-supplies:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ This property is added to a supply in order to list the devices which
+ supply it power, referenced by their phandles.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 000000000..cbac55d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8226-charger
+ - qcom,pm8941-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: charge done
+ - description: charge fast mode
+ - description: charge trickle mode
+ - description: battery temperature ok
+ - description: battery present
+ - description: charger disconnected
+ - description: USB-in valid
+ - description: DC-in valid
+
+ interrupt-names:
+ items:
+ - const: chg-done
+ - const: chg-fast
+ - const: chg-trkl
+ - const: bat-temp-ok
+ - const: bat-present
+ - const: chg-gone
+ - const: usb-valid
+ - const: dc-valid
+
+ qcom,fast-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+ qcom,fast-charge-low-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2100000
+ maximum: 3600000
+ description: |
+ Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+ Below this value linear or switch-mode auto-trickle-charging will operate.
+
+ qcom,fast-charge-high-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+ The fast charger will attempt to charge the battery to this voltage.
+ May be clamped to safety limits.
+
+ qcom,fast-charge-safe-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+ be clamped by this value. Defaults to 4.2V.
+
+ qcom,fast-charge-safe-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: |
+ Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+ will be clamped by this value. Defaults to 1A.
+
+ qcom,auto-recharge-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which auto-recharge functionality will restart charging
+ after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+ Defaults to 4.1V.
+
+ qcom,minimum-input-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 4200000
+ maximum: 9600000
+ description: |
+ Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+ qcom,dc-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default DC charge current limit in uA. Defaults to 100mA.
+
+ qcom,disable-dc:
+ type: boolean
+ description: Disable DC charger
+
+ qcom,jeita-extended-temp-range:
+ type: boolean
+ description: |
+ Enable JEITA extended temperature range; This does *not* adjust the maximum charge
+ voltage or current in the extended temperature range. It only allows charging when
+ the battery is in the extended temperature range. Voltage/current regulation must
+ be done externally to fully comply with the JEITA safety guidelines if this flag
+ is set.
+
+ usb-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default USB charge current limit in uA.
+
+ usb-otg-in-supply:
+ description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+ otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ This node defines a regulator used to control the direction of VBUS voltage.
+ Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+ or allow input voltage from external VBUS for charging. In the hardware, the supply for
+ this regulator comes from usb_otg_in-supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ qcom,fast-charge-current-limit = <1000000>;
+ qcom,dc-current-limit = <1000000>;
+ usb-otg-in-supply = <&pm8941_5vs1>;
+
+ otg-vbus {};
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 000000000..0450f4dd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+ The hardware block controls charging for a coincell or capacitor that is
+ used to provide power backup for certain features of the power management
+ IC (PMIC)
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ const: qcom,pm8941-coincell
+
+ reg:
+ maxItems: 1
+
+ qcom,rset-ohms:
+ description: resistance (in ohms) for current-limiting resistor
+ enum: [ 800, 1200, 1700, 2100 ]
+
+ qcom,vset-millivolts:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: voltage (in millivolts) to apply for charging
+ enum: [ 2500, 3000, 3100, 3200 ]
+
+ qcom,charger-disable:
+ type: boolean
+ description: defining this property disables charging
+
+required:
+ - compatible
+ - reg
+ - qcom,rset-ohms
+ - qcom,vset-millivolts
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
new file mode 100644
index 000000000..756c16d17
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+ - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: richtek,rt5033-battery
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 000000000..bce151013
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Richtek rt9455 battery charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: richtek,rt9455
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ richtek,output-charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: output current from the charger to the battery, in uA.
+
+ richtek,end-of-charge-percentage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ percent of the output charge current. When the current in constant-voltage phase drops
+ below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+ richtek,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum battery voltage in uV.
+
+ richtek,boost-output-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+ richtek,min-input-voltage-regulation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ input voltage level in uV, used to decrease voltage level when the over current of the
+ input power source occurs. This prevents input voltage drop due to insufficient
+ current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+ richtek,avg-input-current-regulation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ input current value in uA drained by the charger from the power source.
+ Defaults to 500000 uA (500mA).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - richtek,output-charge-current
+ - richtek,end-of-charge-percentage
+ - richtek,battery-regulation-voltage
+ - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@22 {
+ compatible = "richtek,rt9455";
+ reg = <0x22>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
+
+ richtek,min-input-voltage-regulation = <4500000>;
+ richtek,avg-input-current-regulation = <500000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 000000000..24b06957b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ - Markus Laine <markus.laine@fi.rohmeurope.com>
+ - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+ The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+ secondary battery intended to be used in space-constraint equipment such
+ as Low profile Notebook PC, Tablets and other applications. BD99954
+ provides a Dual-source Battery Charger, two port BC1.2 detection and a
+ Battery Monitor.
+
+
+properties:
+ compatible:
+ const: rohm,bd99954
+#
+# The battery charging profile of BD99954.
+#
+# Curve (1) represents charging current.
+# Curve (2) represents battery voltage.
+#
+# The BD99954 data sheet divides charging to three phases.
+# a) Trickle-charge with constant current (8).
+# b) pre-charge with constant current (6)
+# c) fast-charge with:
+# First a constant current (5) phase (CC)
+# Then constant voltage (CV) phase (after the battery voltage has reached
+# target level - until charging current has dropped to termination
+# level (7)
+#
+# V ^ ^ I
+# . .
+# . .
+# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++.
+# . / .
+# . ++++++/++ - - - - - - - - - - - - -.- - (5)
+# . + / + .
+# . + - -- .
+# . + - + .
+# . +.- -: .
+# . .+ +` .
+# . .- + | `/ .
+# . .." + .: .
+# . -" + -- .
+# . (2) ..." + | :- .
+# . ..."" + -: .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+# . + `:. .
+# . + | -: .
+# . + -: .
+# . + .. .
+# . (1) + | "+++- - - -.- - (7)
+# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+# . + -
+# -------------------------------------------------+++++++++-->
+# | | | CC | CV |
+# | --trickle-- | -pre- | ---------fast----------- |
+#
+# The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+# Current used at trickle-charge phase (8 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - precharge-current-microamp:
+# Current used at pre-charge phase (6 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-current-max-microamp
+# Current used at fast charge constant current phase (5 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+# The constant voltage used in fast charging phase (4 in above chart)
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - precharge-upper-limit-microvolt
+# charging mode is changed from trickle charging to pre-charging
+# when battery voltage exceeds this limit voltage (3 in above chart)
+# minimum: 2048000
+# maximum: 19200000
+# multipleOf: 64000
+# - re-charge-voltage-microvolt
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# re-charging is automatically started when battry has been discharging
+# to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+# battery is expected to be faulty if battery voltage exceeds this limit.
+# Charger will then enter to a "battery faulty" -state
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - charge-term-current-microamp
+# minimum: 0
+# maximum: 1024000
+# multipleOf: 64000
+# a charge cycle terminates when the battery voltage is above recharge
+# threshold, and the current is below this setting (7 in above chart)
+# See also Documentation/devicetree/bindings/power/supply/battery.yaml
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ monitored-battery:
+ description:
+ phandle of battery characteristics devicetree node
+
+ rohm,vsys-regulation-microvolt:
+ description: system specific lower limit for system voltage.
+ minimum: 2560000
+ maximum: 19200000
+ multipleOf: 64000
+
+ rohm,vbus-input-current-limit-microamp:
+ description: system specific VBUS input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+ rohm,vcc-input-current-limit-microamp:
+ description: system specific VCC/VACP input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ charger@9 {
+ compatible = "rohm,bd99954";
+ monitored-battery = <&battery>;
+ reg = <0x9>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 8>;
+ rohm,vsys-regulation-microvolt = <8960000>;
+ rohm,vbus-input-current-limit-microamp = <1472000>;
+ rohm,vcc-input-current-limit-microamp = <1472000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
new file mode 100644
index 000000000..40292d581
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SDI Batteries
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ Samsung SDI (Samsung Digital Interface) batteries are all different versions
+ of lithium ion chemistry devices used for mobile phones, laptops and other
+ portable electronics. The batteries are adapted to a specific product and
+ the physical restrictions make it impossible to use another battery with the
+ product, so product device trees can specify these batteries. Operating
+ systems should determine hardware characteristics of the batteries from the
+ compatible string.
+
+properties:
+ compatible:
+ oneOf:
+ - const: samsung,eb-l1m7flu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I8190
+ - const: samsung,eb425161la
+ description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407
+ - const: samsung,eb425161lu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I8160
+ - const: samsung,eb485159lu
+ description: 3.8V 1700 mAh battery used in Samsung GT-S7710
+ - const: samsung,eb535151vu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I9070
+ - const: samsung,eb585157lu
+ description: 3.8V 2000 mAh battery used in Samsung GT-I8530
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ power {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: battery {
+ compatible = "samsung,eb425161la";
+ };
+
+ charger@11 {
+ reg = <0x11>;
+ monitored-battery = <&battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 000000000..90b9d3d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Battery compatible with the smart battery system specifications
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,bq20z45
+ - ti,bq20z65
+ - ti,bq20z75
+ - enum:
+ - sbs,sbs-battery
+ - items:
+ - const: sbs,sbs-battery
+
+ reg:
+ maxItems: 1
+
+ sbs,i2c-retry-count:
+ description:
+ The number of times to retry I2C transactions on I2C IO failure.
+ default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,poll-retry-count:
+ description:
+ The number of times to try looking for new status after an external
+ change notification.
+ default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,battery-detect-gpios:
+ description:
+ GPIO which signals battery detection. If this is not supplied, the bus
+ needs to be polled to detect the battery.
+ maxItems: 1
+
+ sbs,disable-charger-broadcasts:
+ description:
+ SBS batteries by default send broadcast messages to SBS compliant chargers to
+ configure max. charge current/voltage. If your hardware does not have an SBS
+ compliant charger it should be disabled via this property to avoid blocking
+ the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+ master implementation.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@b {
+ compatible = "ti,bq20z75", "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+ sbs,disable-charger-broadcasts;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 000000000..cb73ffa47
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Charger compatible with the smart battery system specifications
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - lltc,ltc4100
+ - enum:
+ - sbs,sbs-charger
+ - items:
+ - const: sbs,sbs-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "lltc,ltc4100", "sbs,sbs-charger";
+ reg = <0x9>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 000000000..99f506d6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - lltc,ltc1760
+ - enum:
+ - sbs,sbs-manager
+ - items:
+ - const: sbs,sbs-manager
+
+ reg:
+ const: 0xa
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "^i2c@[1-4]$":
+ type: object
+ $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ batman: battery-manager@a {
+ compatible = "lltc,ltc1760", "sbs,sbs-manager";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 1 1>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 2 1>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 3 1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 000000000..eeb043f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMICs battery charger binding
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: sprd,sc2731-charger
+
+ reg:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+ description: phandle to the USB phy
+
+ monitored-battery:
+ description: |
+ The charger uses the following battery properties
+ - charge-term-current-microamp: current for charge termination phase.
+ - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+ See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ charge-term-current-microamp = <120000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ };
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@a00 {
+ compatible = "sprd,sc2731-charger";
+ reg = <0x0>;
+ phys = <&ssphy>;
+ monitored-battery = <&bat>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 000000000..d90a838a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc2720-fgu
+ - sprd,sc2721-fgu
+ - sprd,sc2723-fgu
+ - sprd,sc2730-fgu
+ - sprd,sc2731-fgu
+
+ reg:
+ maxItems: 1
+
+ battery-detect-gpios:
+ maxItems: 1
+
+ io-channels:
+ items:
+ - description: Battery Temperature ADC
+ - description: Battery Charge Voltage ADC
+
+ io-channel-names:
+ items:
+ - const: bat-temp
+ - const: charge-vol
+
+ nvmem-cells:
+ maxItems: 1
+ description: Calibration cells provided by eFuse device
+
+ nvmem-cell-names:
+ const: fgu_calib
+
+ sprd,calib-resistance-micro-ohms:
+ description: real resistance of coulomb counter chip in micro Ohms
+
+ monitored-battery: true
+
+required:
+ - compatible
+ - reg
+ - battery-detect-gpios
+ - io-channels
+ - io-channel-names
+ - nvmem-cells
+ - nvmem-cell-names
+ - sprd,calib-resistance-micro-ohms
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ bat: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <1900000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+ <4022000 85>, <3983000 80>, <3949000 75>,
+ <3917000 70>, <3889000 65>, <3864000 60>,
+ <3835000 55>, <3805000 50>, <3787000 45>,
+ <3777000 40>, <3773000 35>, <3770000 30>,
+ <3765000 25>, <3752000 20>, <3724000 15>,
+ <3680000 10>, <3605000 5>, <3400000 0>;
+ // ...
+ };
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@a00 {
+ compatible = "sprd,sc2731-fgu";
+ reg = <0xa00>;
+ battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+ io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+ io-channel-names = "bat-temp", "charge-vol";
+ nvmem-cells = <&fgu_calib>;
+ nvmem-cell-names = "fgu_calib";
+ monitored-battery = <&bat>;
+ sprd,calib-resistance-micro-ohms = <21500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
new file mode 100644
index 000000000..ee125cb0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
@@ -0,0 +1,34 @@
+AB85000 PMIC contains a node, which contains shared
+information about the battery connected to the PMIC.
+The node has no compatible property.
+
+Properties of this node are:
+
+thermistor-on-batctrl:
+ A boolean value indicating thermistor interface to battery
+
+ Note:
+ 'btemp' and 'batctrl' are the pins interfaced for battery temperature
+ measurement, 'btemp' signal is used when NTC(negative temperature
+ coefficient) resister is interfaced external to battery whereas
+ 'batctrl' pin is used when NTC resister is internal to battery.
+
+ Example:
+ ab8500_battery: ab8500_battery {
+ thermistor-on-batctrl;
+ };
+ indicates: NTC resister is internal to battery, 'batctrl' is used
+ for thermal measurement.
+
+ The absence of property 'thermal-on-batctrl' indicates
+ NTC resister is external to battery and 'btemp' signal is used
+ for thermal measurement.
+
+battery-type:
+ This shall be the battery manufacturing technology type,
+ allowed types are:
+ "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+ Example:
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ }
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 000000000..525abdfb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-btemp
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ interrupts:
+ maxItems: 5
+
+ interrupt-names:
+ items:
+ - const: BAT_CTRL_INDB
+ - const: BTEMP_LOW
+ - const: BTEMP_HIGH
+ - const: BTEMP_LOW_MEDIUM
+ - const: BTEMP_MEDIUM_HIGH
+
+ io-channels:
+ maxItems: 2
+
+ io-channel-names:
+ items:
+ - const: btemp_ball
+ - const: bat_ctrl
+
+required:
+ - compatible
+ - monitored-battery
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ battery-temperature {
+ compatible = "stericsson,ab8500-btemp";
+ monitored-battery = <&battery>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "BAT_CTRL_INDB",
+ "BTEMP_LOW",
+ "BTEMP_HIGH",
+ "BTEMP_LOW_MEDIUM",
+ "BTEMP_MEDIUM_HIGH";
+ io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+ io-channel-names = "btemp_ball", "bat_ctrl";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 000000000..10bbdcfc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-chargalg
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+required:
+ - compatible
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charging-algorithm {
+ compatible = "stericsson,ab8500-chargalg";
+ monitored-battery = <&ab8500_battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 000000000..e33329b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-charger
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ vddadc-supply:
+ description: Supply for USB and Main charger
+
+ autopower_cfg:
+ type: boolean
+ description: automatic poweron after powerloss
+
+ interrupts:
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: MAIN_CH_UNPLUG_DET
+ - const: MAIN_CHARGE_PLUG_DET
+ - const: MAIN_EXT_CH_NOT_OK
+ - const: MAIN_CH_TH_PROT_R
+ - const: MAIN_CH_TH_PROT_F
+ - const: VBUS_DET_F
+ - const: VBUS_DET_R
+ - const: USB_LINK_STATUS
+ - const: USB_CH_TH_PROT_R
+ - const: USB_CH_TH_PROT_F
+ - const: USB_CHARGER_NOT_OKR
+ - const: VBUS_OVV
+ - const: CH_WD_EXP
+ - const: VBUS_CH_DROP_END
+
+ io-channels:
+ minItems: 2
+ maxItems: 4
+
+ io-channel-names:
+ oneOf:
+ - items:
+ - const: main_charger_v
+ - const: main_charger_c
+ - const: vbus_v
+ - const: usb_charger_c
+ - items:
+ - const: vbus_v
+ - const: usb_charger_c
+
+
+required:
+ - compatible
+ - monitored-battery
+ - vddadc-supply
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ charger {
+ compatible = "stericsson,ab8500-charger";
+ monitored-battery = <&battery>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_LEVEL_HIGH>,
+ <107 IRQ_TYPE_LEVEL_HIGH>,
+ <106 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <105 IRQ_TYPE_LEVEL_HIGH>,
+ <104 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>,
+ <21 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "MAIN_CH_UNPLUG_DET",
+ "MAIN_CHARGE_PLUG_DET",
+ "MAIN_EXT_CH_NOT_OK",
+ "MAIN_CH_TH_PROT_R",
+ "MAIN_CH_TH_PROT_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_CH_TH_PROT_R",
+ "USB_CH_TH_PROT_F",
+ "USB_CHARGER_NOT_OKR",
+ "VBUS_OVV",
+ "CH_WD_EXP",
+ "VBUS_CH_DROP_END";
+ io-channels = <&gpadc 0x03>,
+ <&gpadc 0x0a>,
+ <&gpadc 0x09>,
+ <&gpadc 0x0b>;
+ io-channel-names = "main_charger_v",
+ "main_charger_c",
+ "vbus_v",
+ "usb_charger_c";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 000000000..6a724ca90
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-fg
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ line-impedance-micro-ohms:
+ description: The line impedance between the battery and the
+ AB8500 inputs, to compensate for this when determining internal
+ resistance.
+
+ interrupts:
+ maxItems: 5
+
+ interrupt-names:
+ items:
+ - const: NCONV_ACCU
+ - const: BATT_OVV
+ - const: LOW_BAT_F
+ - const: CC_INT_CALIB
+ - const: CCEOC
+
+ io-channels:
+ maxItems: 1
+
+ io-channel-names:
+ items:
+ - const: main_bat_v
+
+required:
+ - compatible
+ - monitored-battery
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ fuel-gauge {
+ compatible = "stericsson,ab8500-fg";
+ monitored-battery = <&battery>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <8 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "NCONV_ACCU",
+ "BATT_OVV",
+ "LOW_BAT_F",
+ "CC_INT_CALIB",
+ "CCEOC";
+ io-channels = <&gpadc 0x08>;
+ io-channel-names = "main_bat_v";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 000000000..2d552becb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+ - David Heidelberg <david@ixit.cz>
+ - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - summit,smb345
+ - summit,smb347
+ - summit,smb358
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ monitored-battery:
+ description: phandle to the battery node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ summit,enable-usb-charging:
+ type: boolean
+ description: Enable charging through USB.
+
+ summit,enable-otg-charging:
+ type: boolean
+ description: Provide power for USB OTG
+
+ summit,enable-mains-charging:
+ type: boolean
+ description: Enable charging through mains
+
+ summit,enable-charge-control:
+ description: Enable charging control
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+ - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+ - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+ summit,fast-voltage-threshold-microvolt:
+ description: Voltage threshold to transit to fast charge mode (in uV)
+ minimum: 2400000
+ maximum: 3000000
+
+ summit,mains-current-limit-microamp:
+ description: Maximum input current from AC/DC input (in uA)
+
+ summit,usb-current-limit-microamp:
+ description: Maximum input current from USB input (in uA)
+
+ summit,charge-current-compensation-microamp:
+ description: Charge current compensation (in uA)
+
+ summit,chip-temperature-threshold-celsius:
+ description: Chip temperature for thermal regulation in °C.
+ enum: [100, 110, 120, 130]
+
+ summit,soft-compensation-method:
+ description: Soft temperature limit compensation method
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+ - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+ - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+ summit,inok-polarity:
+ description: |
+ Polarity of INOK signal indicating presence of external power supply.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+ - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+ usb-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+
+ properties:
+ summit,needs-inok-toggle:
+ type: boolean
+ description: INOK signal is fixed and polarity needs to be toggled
+ in order to enable/disable output mode.
+
+ unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - summit,smb345
+ - summit,smb358
+
+ then:
+ properties:
+ summit,mains-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
+
+ summit,usb-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
+
+ summit,charge-current-compensation-microamp:
+ enum: [200000, 450000, 600000, 900000]
+
+ else:
+ properties:
+ summit,mains-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
+
+ summit,usb-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
+
+ summit,charge-current-compensation-microamp:
+ enum: [250000, 700000, 900000, 1200000]
+
+required:
+ - compatible
+ - reg
+
+anyOf:
+ - required:
+ - summit,enable-usb-charging
+ - required:
+ - summit,enable-otg-charging
+ - required:
+ - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/power/summit,smb347-charger.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@7f {
+ compatible = "summit,smb347";
+ reg = <0x7f>;
+
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+ summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+ summit,chip-temperature-threshold-celsius = <110>;
+ summit,mains-current-limit-microamp = <2000000>;
+ summit,usb-current-limit-microamp = <500000>;
+ summit,enable-usb-charging;
+ summit,enable-mains-charging;
+
+ monitored-battery = <&battery>;
+
+ usb-vbus {
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microamp = <750000>;
+ regulator-max-microamp = <750000>;
+ summit,needs-inok-toggle;
+ };
+ };
+ };
+
+ battery: battery-cell {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <1800000>;
+ operating-range-celsius = <0 45>;
+ alert-celsius = <3 42>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 000000000..93654e732
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI/National Semiconductor LP8727 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,lp8727
+
+ reg:
+ const: 0x27
+
+ interrupts:
+ maxItems: 1
+
+ debounce-ms:
+ description: interrupt debounce time in ms
+
+patternProperties:
+ '^(ac|usb)$':
+ type: object
+ description: USB/AC charging parameters
+ properties:
+ charger-type:
+ enum:
+ - ac
+ - usb
+
+ eoc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 6
+ description: |
+ End of Charge Percentage with the following mapping:
+ 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+ charging-current:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 9
+ description: |
+ Charging current with the following mapping:
+ 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+ 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lp8727: charger@27 {
+ compatible = "ti,lp8727";
+ reg = <0x27>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ debounce-ms = <300>;
+
+ /* AC charger: 5% EOC and 500mA charging current */
+ ac {
+ charger-type = "ac";
+ eoc-level = /bits/ 8 <0>;
+ charging-current = /bits/ 8 <4>;
+ };
+
+ /* USB charger: 10% EOC and 400mA charging current */
+ usb {
+ charger-type = "usb";
+ eoc-level = /bits/ 8 <1>;
+ charging-current = /bits/ 8 <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 000000000..586745426
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,tps65090-charger
+
+ ti,enable-low-current-chrg:
+ type: boolean
+ description: |
+ Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,tps65090-charger";
+ ti,enable-low-current-chrg;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 000000000..7ccf0cdff
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,tps65217-charger
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: USB
+ - const: AC
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,tps65217-charger";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 000000000..d8d3154f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+ The battery charger needs to interact with the USB phy in order to know when
+ charging is permissible, and when there is a connection or disconnection.
+
+ The choice of phy cannot be configured at a hardware level, so there is no
+ value in explicit configuration in device-tree. Rather if there is a sibling
+ of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+ to determine when and how use USB power for charging.
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,twl4030-bci
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ ti,bb-uvolt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: microvolts for charging the backup battery
+
+ ti,bb-uamp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: microamps for charging the backup battery
+
+ io-channels:
+ items:
+ - description: Accessory Charger Voltage Channel
+
+ io-channel-names:
+ items:
+ - const: vac
+
+ bci3v1-supply:
+ description: 3.1V USB regulator
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,twl4030-bci";
+ interrupts = <9>, <2>;
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+ io-channels = <&twl_madc 11>;
+ io-channel-names = "vac";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 000000000..5c8369fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x AC power-supply
+
+description: |
+ The AXP20X can read the current current and voltage supplied by AC by
+ reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+ tell if an AC power supply is present and usable. AXP813/AXP803 are
+ able to limit current and supply voltage
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: x-powers,axp202-ac-power-supply
+ - const: x-powers,axp221-ac-power-supply
+ - items:
+ - const: x-powers,axp803-ac-power-supply
+ - const: x-powers,axp813-ac-power-supply
+ - const: x-powers,axp813-ac-power-supply
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 000000000..e0b95ecbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x Battery power-supply
+
+description: |
+ The supported devices can read the battery voltage, charge and discharge
+ currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: x-powers,axp202-battery-power-supply
+ - const: x-powers,axp209-battery-power-supply
+ - const: x-powers,axp221-battery-power-supply
+ - items:
+ - const: x-powers,axp803-battery-power-supply
+ - const: x-powers,axp813-battery-power-supply
+ - const: x-powers,axp813-battery-power-supply
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 000000000..3ce648dd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x USB power-supply
+
+description: |
+ The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+ variations such as the former being able to set the VBUS power supply max
+ current to 100mA, unlike the latter.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - x-powers,axp202-usb-power-supply
+ - x-powers,axp221-usb-power-supply
+ - x-powers,axp223-usb-power-supply
+ - x-powers,axp813-usb-power-supply
+ - items:
+ - const: x-powers,axp803-usb-power-supply
+ - const: x-powers,axp813-usb-power-supply
+
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
new file mode 100644
index 000000000..21ef14d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt
@@ -0,0 +1,47 @@
+Texas Instruments SmartReflex binding
+
+SmartReflex is used to set and adjust the SoC operating points.
+
+
+Required properties:
+
+compatible: Shall be one of the following:
+ "ti,omap3-smartreflex-core"
+ "ti,omap3-smartreflex-mpu-iva"
+ "ti,omap4-smartreflex-core"
+ "ti,omap4-smartreflex-mpu"
+ "ti,omap4-smartreflex-iva"
+
+reg: Shall contain the device instance IO range
+
+interrupts: Shall contain the device instance interrupt
+
+
+Optional properties:
+
+ti,hwmods: Shall contain the TI interconnect module name if needed
+ by the SoC
+
+
+Example:
+
+ smartreflex_iva: smartreflex@4a0db000 {
+ compatible = "ti,omap4-smartreflex-iva";
+ reg = <0x4a0db000 0x80>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "smartreflex_iva";
+ };
+
+ smartreflex_core: smartreflex@4a0dd000 {
+ compatible = "ti,omap4-smartreflex-core";
+ reg = <0x4a0dd000 0x80>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "smartreflex_core";
+ };
+
+ smartreflex_mpu: smartreflex@4a0d9000 {
+ compatible = "ti,omap4-smartreflex-mpu";
+ reg = <0x4a0d9000 0x80>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "smartreflex_mpu";
+ };
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
new file mode 100644
index 000000000..cfd74659f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -0,0 +1,70 @@
+Specifying wakeup capability for devices
+============================================
+
+Any device nodes
+----------------
+Nodes that describe devices which has wakeup capability must contain an
+"wakeup-source" boolean property.
+
+Also, if device is marked as a wakeup source, then all the primary
+interrupt(s) can be used as wakeup interrupt(s).
+
+However if the devices have dedicated interrupt as the wakeup source
+then they need to specify/identify the same using device specific
+interrupt name. In such cases only that interrupt can be used as wakeup
+interrupt.
+
+List of legacy properties and respective binding document
+---------------------------------------------------------
+
+1. "enable-sdio-wakeup" Documentation/devicetree/bindings/mmc/mmc.txt
+2. "gpio-key,wakeup" Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt
+3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
+4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+ Documentation/devicetree/bindings/mfd/tc3589x.txt
+ Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
+7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+
+Examples
+--------
+
+1. With "wakeup" interrupt name
+
+ device@10000 {
+ compatible = "vendor,device-id";
+ reg = <0x10000 0x1000>;
+ interrupts = <0 19 4>, <0 21 4>, <0 22 4>;
+ interrupt-names = "ack", "err", "wakeup";
+ wakeup-source;
+ };
+
+2. Without "wakeup" interrupt name
+
+ embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 0>;
+ interrupt-parent = <&gpx1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ wakeup-source;
+ };
+
+3. Without interrupts
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <116>;
+ label = "POWER";
+ gpios = <&iofpga_gpio0 0 0x4>;
+ };
+ [....]
+ };
diff --git a/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
new file mode 100644
index 000000000..54b9f9d0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/xlnx,zynqmp-genpd.txt
@@ -0,0 +1,34 @@
+-----------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC PM domains
+-----------------------------------------------------------
+The binding for zynqmp-power-controller follow the common
+generic PM domain binding[1].
+
+[1] Documentation/devicetree/bindings/power/power-domain.yaml
+
+== Zynq MPSoC Generic PM Domain Node ==
+
+Required property:
+ - Below property should be in zynqmp-firmware node.
+ - #power-domain-cells: Number of cells in a PM domain specifier. Must be 1.
+
+Power domain ID indexes are mentioned in
+include/dt-bindings/power/xlnx-zynqmp-power.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ ...
+ #power-domain-cells = <1>;
+ ...
+ };
+};
+
+sata {
+ ...
+ power-domains = <&zynqmp_firmware 28>;
+ ...
+};