summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power/supply/bq24190.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply/bq24190.yaml')
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24190.yaml92
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
new file mode 100644
index 000000000..4884ec90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24190
+ - ti,bq24192
+ - ti,bq24192i
+ - ti,bq24196
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ usb-otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ Regulator that is used to control the VBUS voltage direction for
+ either USB host mode or for charging on the OTG port
+
+ ti,system-minimum-microvolt:
+ description: |
+ when power is connected and the battery is below minimum system voltage,
+ the system will be regulated above this setting.
+
+ omit-battery-class:
+ type: boolean
+ description: |
+ If this property is set, the operating system does not try to create a
+ battery device.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to a "simple-battery" compatible node.
+
+ This property must be a phandle to a node using the format described
+ in battery.yaml, with the following properties being required:
+ - precharge-current-microamp: maximum charge current during precharge phase
+ (typically 20% of battery capacity).
+ - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+ above recharge threshold, and the current is below this
+ setting (typically 10% of battery capacity).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bat: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <128000>;
+ };
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24190";
+ reg = <0x6a>;
+ interrupt-parent = <&gpiochip>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ monitored-battery = <&bat>;
+ ti,system-minimum-microvolt = <3200000>;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };