summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power/supply/bq24735.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply/bq24735.yaml')
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24735.yaml89
1 files changed, 89 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 000000000..dd9176ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,bq24735
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: AC adapter plug event interrupt
+ maxItems: 1
+
+ ti,ac-detect-gpios:
+ maxItems: 1
+ description: |
+ This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+ that is configured as an input and connected to the ACOK pin on the bq24735.
+ Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+ absence despite ACOK being active (high) on AC adapter presence.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging current.
+ This value must be between 128mA and 8.128A with a 64mA step resolution.
+ The POR value is 0x0000h. This number is in mA (e.g. 8192).
+ See spec for more information about the ChargeCurrent (0x14h) register.
+
+ ti,charge-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging voltage.
+ This value must be between 1.024V and 19.2V with a 16mV step resolution.
+ The POR value is 0x0000h. This number is in mV (e.g. 19200).
+ See spec for more information about the ChargeVoltage (0x15h) register.
+
+ ti,input-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charger input current.
+ This value must be between 128mA and 8.064A with a 128mA step resolution.
+ The POR value is 0x1000h. This number is in mA (e.g. 8064).
+ See the spec for more information about the InputCurrent (0x3fh) register.
+
+ ti,external-control:
+ type: boolean
+ description: |
+ Indicates that the charger is configured externally and that the host should not
+ attempt to enable/disable charging or set the charge voltage/current.
+
+ poll-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ ti,ac-detect-gpios = <&gpio 72 0x1>;
+ };
+ };