diff options
Diffstat (limited to 'drivers/cpuidle/cpuidle-big_little.c')
| -rw-r--r-- | drivers/cpuidle/cpuidle-big_little.c | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c new file mode 100644 index 000000000..abe51185f --- /dev/null +++ b/drivers/cpuidle/cpuidle-big_little.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013 ARM/Linaro + * + * Authors: Daniel Lezcano <daniel.lezcano@linaro.org> + * Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * Nicolas Pitre <nicolas.pitre@linaro.org> + * + * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> + * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org> + */ +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include <asm/cpu.h> +#include <asm/cputype.h> +#include <asm/cpuidle.h> +#include <asm/mcpm.h> +#include <asm/smp_plat.h> +#include <asm/suspend.h> + +#include "dt_idle_states.h" + +static int bl_enter_powerdown(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx); + +/* + * NB: Owing to current menu governor behaviour big and LITTLE + * index 1 states have to define exit_latency and target_residency for + * cluster state since, when all CPUs in a cluster hit it, the cluster + * can be shutdown. This means that when a single CPU enters this state + * the exit_latency and target_residency values are somewhat overkill. + * There is no notion of cluster states in the menu governor, so CPUs + * have to define CPU states where possibly the cluster will be shutdown + * depending on the state of other CPUs. idle states entry and exit happen + * at random times; however the cluster state provides target_residency + * values as if all CPUs in a cluster enter the state at once; this is + * somewhat optimistic and behaviour should be fixed either in the governor + * or in the MCPM back-ends. + * To make this driver 100% generic the number of states and the exit_latency + * target_residency values must be obtained from device tree bindings. + * + * exit_latency: refers to the TC2 vexpress test chip and depends on the + * current cluster operating point. It is the time it takes to get the CPU + * up and running when the CPU is powered up on cluster wake-up from shutdown. + * Current values for big and LITTLE clusters are provided for clusters + * running at default operating points. + * + * target_residency: it is the minimum amount of time the cluster has + * to be down to break even in terms of power consumption. cluster + * shutdown has inherent dynamic power costs (L2 writebacks to DRAM + * being the main factor) that depend on the current operating points. + * The current values for both clusters are provided for a CPU whose half + * of L2 lines are dirty and require cleaning to DRAM, and takes into + * account leakage static power values related to the vexpress TC2 testchip. + */ +static struct cpuidle_driver bl_idle_little_driver = { + .name = "little_idle", + .owner = THIS_MODULE, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = bl_enter_powerdown, + .exit_latency = 700, + .target_residency = 2500, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .name = "C1", + .desc = "ARM little-cluster power down", + }, + .state_count = 2, +}; + +static const struct of_device_id bl_idle_state_match[] __initconst = { + { .compatible = "arm,idle-state", + .data = bl_enter_powerdown }, + { }, +}; + +static struct cpuidle_driver bl_idle_big_driver = { + .name = "big_idle", + .owner = THIS_MODULE, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .states[1] = { + .enter = bl_enter_powerdown, + .exit_latency = 500, + .target_residency = 2000, + .flags = CPUIDLE_FLAG_TIMER_STOP, + .name = "C1", + .desc = "ARM big-cluster power down", + }, + .state_count = 2, +}; + +/* + * notrace prevents trace shims from getting inserted where they + * should not. Global jumps and ldrex/strex must not be inserted + * in power down sequences where caches and MMU may be turned off. + */ +static int notrace bl_powerdown_finisher(unsigned long arg) +{ + /* MCPM works with HW CPU identifiers */ + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + + mcpm_set_entry_vector(cpu, cluster, cpu_resume); + mcpm_cpu_suspend(); + + /* return value != 0 means failure */ + return 1; +} + +/** + * bl_enter_powerdown - Programs CPU to enter the specified state + * @dev: cpuidle device + * @drv: The target state to be programmed + * @idx: state index + * + * Called from the CPUidle framework to program the device to the + * specified target state selected by the governor. + */ +static int bl_enter_powerdown(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx) +{ + cpu_pm_enter(); + + cpu_suspend(0, bl_powerdown_finisher); + + /* signals the MCPM core that CPU is out of low power state */ + mcpm_cpu_powered_up(); + + cpu_pm_exit(); + + return idx; +} + +static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id) +{ + struct cpumask *cpumask; + int cpu; + + cpumask = kzalloc(cpumask_size(), GFP_KERNEL); + if (!cpumask) + return -ENOMEM; + + for_each_possible_cpu(cpu) + if (smp_cpuid_part(cpu) == part_id) + cpumask_set_cpu(cpu, cpumask); + + drv->cpumask = cpumask; + + return 0; +} + +static const struct of_device_id compatible_machine_match[] = { + { .compatible = "arm,vexpress,v2p-ca15_a7" }, + { .compatible = "google,peach" }, + {}, +}; + +static int __init bl_idle_init(void) +{ + int ret; + struct device_node *root = of_find_node_by_path("/"); + const struct of_device_id *match_id; + + if (!root) + return -ENODEV; + + /* + * Initialize the driver just for a compliant set of machines + */ + match_id = of_match_node(compatible_machine_match, root); + + of_node_put(root); + + if (!match_id) + return -ENODEV; + + if (!mcpm_is_available()) + return -EUNATCH; + + /* + * For now the differentiation between little and big cores + * is based on the part number. A7 cores are considered little + * cores, A15 are considered big cores. This distinction may + * evolve in the future with a more generic matching approach. + */ + ret = bl_idle_driver_init(&bl_idle_little_driver, + ARM_CPU_PART_CORTEX_A7); + if (ret) + return ret; + + ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15); + if (ret) + goto out_uninit_little; + + /* Start at index 1, index 0 standard WFI */ + ret = dt_init_idle_driver(&bl_idle_big_driver, bl_idle_state_match, 1); + if (ret < 0) + goto out_uninit_big; + + /* Start at index 1, index 0 standard WFI */ + ret = dt_init_idle_driver(&bl_idle_little_driver, + bl_idle_state_match, 1); + if (ret < 0) + goto out_uninit_big; + + ret = cpuidle_register(&bl_idle_little_driver, NULL); + if (ret) + goto out_uninit_big; + + ret = cpuidle_register(&bl_idle_big_driver, NULL); + if (ret) + goto out_unregister_little; + + return 0; + +out_unregister_little: + cpuidle_unregister(&bl_idle_little_driver); +out_uninit_big: + kfree(bl_idle_big_driver.cpumask); +out_uninit_little: + kfree(bl_idle_little_driver.cpumask); + + return ret; +} +device_initcall(bl_idle_init); |