summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--ChangeLog28
-rw-r--r--INSTALL2
-rw-r--r--NEWS34
-rw-r--r--README2
-rw-r--r--bbexample.c2
-rw-r--r--carg_parser.c2
-rw-r--r--carg_parser.h2
-rw-r--r--cbuffer.c2
-rwxr-xr-xconfigure6
-rw-r--r--decoder.c2
-rw-r--r--decoder.h10
-rw-r--r--doc/lzlib.info284
-rw-r--r--doc/lzlib.texi275
-rw-r--r--doc/minilzip.111
-rw-r--r--encoder.c2
-rw-r--r--encoder.h6
-rw-r--r--encoder_base.c49
-rw-r--r--encoder_base.h21
-rw-r--r--fast_encoder.c2
-rw-r--r--fast_encoder.h6
-rw-r--r--lzcheck.c89
-rw-r--r--lzip.h19
-rw-r--r--lzlib.c26
-rw-r--r--lzlib.h4
-rw-r--r--main.c471
-rwxr-xr-xtestsuite/check.sh62
26 files changed, 997 insertions, 422 deletions
diff --git a/ChangeLog b/ChangeLog
index 70eb638..c13bf2e 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,16 @@
+2018-02-07 Antonio Diaz Diaz <antonio@gnu.org>
+
+ * Version 1.10 released.
+ * LZ_compress_finish now adjusts dictionary size for each member.
+ * lzlib.c (LZ_decompress_read): Detect corrupt header with HD=3.
+ * main.c: Added new option '--loose-trailing'.
+ * main.c (main): Option '-S, --volume-size' now keeps input files.
+ * main.c: Replaced 'bits/byte' with inverse compression ratio.
+ * main.c: Show final diagnostic when testing multiple files.
+ * main.c: Do not add a second .lz extension to the arg of -o.
+ * main.c: Show dictionary size at verbosity level 4 (-vvvv).
+ * lzlib.texi: Added chapter 'Invoking minilzip'.
+
2017-04-11 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.9 released.
@@ -10,14 +23,15 @@
2016-05-17 Antonio Diaz Diaz <antonio@gnu.org>
* Version 1.8 released.
+ * lzlib.h: Define LZ_API_VERSION to 1.
* decoder.c (LZd_verify_trailer): Removed test of final code.
* main.c: Added new option '-a, --trailing-error'.
* main.c (main): Delete '--output' file if infd is a terminal.
* main.c (main): Don't use stdin more than once.
* configure: Avoid warning on some shells when testing for gcc.
* Makefile.in: Detect the existence of install-info.
- * testsuite/check.sh: A POSIX shell is required to run the tests.
- * testsuite/check.sh: Don't check error messages.
+ * check.sh: A POSIX shell is required to run the tests.
+ * check.sh: Don't check error messages.
2015-07-08 Antonio Diaz Diaz <antonio@gnu.org>
@@ -78,7 +92,7 @@
reduces compression time for large values of '--match-length'
by up to 6%.
* main.cc: Added new option '-F, --recompress'.
- * Makefile.in: 'make install' no more tries to run
+ * Makefile.in: 'make install' no longer tries to run
'/sbin/ldconfig' on systems lacking it.
2011-01-03 Antonio Diaz Diaz <ant_diaz@teleline.es>
@@ -129,14 +143,14 @@
allowing LZ_compress_restart_member to restart a finished stream.
* lzlib.cc: Accept only query or close operations after a fatal
error has occurred.
- * Shared version of lzlib is no more built by default.
- * testsuite/check.sh: Use 'test1' instead of 'COPYING' for testing.
+ * Shared version of lzlib is no longer built by default.
+ * check.sh: Use 'test1' instead of 'COPYING' for testing.
2009-10-20 Antonio Diaz Diaz <ant_diaz@teleline.es>
* Version 0.7 released.
* Compression time has been reduced by 4%.
- * testsuite/check.sh: Removed -9 to run in less than 256MiB of RAM.
+ * check.sh: Removed -9 to run in less than 256MiB of RAM.
* lzcheck.cc: Read files of any size up to 2^63 bytes.
2009-09-02 Antonio Diaz Diaz <ant_diaz@teleline.es>
@@ -174,7 +188,7 @@
* Version 0.1 released.
-Copyright (C) 2009-2017 Antonio Diaz Diaz.
+Copyright (C) 2009-2018 Antonio Diaz Diaz.
This file is a collection of facts, and thus it is not copyrightable,
but just in case, you have unlimited permission to copy, distribute and
diff --git a/INSTALL b/INSTALL
index 3dbf6e8..735d666 100644
--- a/INSTALL
+++ b/INSTALL
@@ -62,7 +62,7 @@ After running 'configure', you can run 'make' and 'make install' as
explained above.
-Copyright (C) 2009-2017 Antonio Diaz Diaz.
+Copyright (C) 2009-2018 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute and modify it.
diff --git a/NEWS b/NEWS
index 111a899..c610506 100644
--- a/NEWS
+++ b/NEWS
@@ -1,12 +1,32 @@
-Changes in version 1.9:
+Changes in version 1.10:
-Compression time of option '-0' has been reduced by 3%.
+The function 'LZ_compress_finish' now adjusts the dictionary size for
+each member.
-Compression time of options '-1' to '-9' has been reduced by 1%.
+The option '--loose-trailing', has been added to minilzip.
-Decompression time has been reduced by 3%.
+The test used by lzlib to discriminate trailing data from a corrupt
+header in multimember or concatenated files has been improved to a
+Hamming distance (HD) of 3, and the 3 bit flips must happen in different
+magic bytes for the test to fail. As a consequence, lzlib now returns a
+data error when some kinds of files are appended to a lzip file as
+trailing data.
+The '--loose-trailing' option of minilzip can be used to ignore such
+trailing data when decompressing.
+Lziprecover can be used to remove conflicting trailing data from a file.
-In test mode, minilzip now continues checking the rest of the files if
-any input file is a terminal.
+Option '-S, --volume-size' of minilzip now keeps input files unchanged.
-The license of the library has been changed to "2-clause BSD".
+The 'bits/byte' ratio has been replaced with the inverse compression
+ratio in the output of minilzip.
+
+minilzip now shows a final diagnostic at verbosity level 1 (-v) or
+higher if any file fails the test when testing multiple files.
+
+minilzip no longer adds a second '.lz' extension to the argument of '-o'
+if it already ends in '.lz' or '.tlz'.
+
+minilzip now shows the dictionary size at verbosity level 4 (-vvvv) when
+decompressing or testing.
+
+The new chapter 'Invoking minilzip' has been added to the manual.
diff --git a/README b/README
index 178f30f..6a9c6f2 100644
--- a/README
+++ b/README
@@ -87,7 +87,7 @@ range encoding), Igor Pavlov (for putting all the above together in
LZMA), and Julian Seward (for bzip2's CLI).
-Copyright (C) 2009-2017 Antonio Diaz Diaz.
+Copyright (C) 2009-2018 Antonio Diaz Diaz.
This file is free documentation: you have unlimited permission to copy,
distribute and modify it.
diff --git a/bbexample.c b/bbexample.c
index ab9a6e0..8c2ff04 100644
--- a/bbexample.c
+++ b/bbexample.c
@@ -1,5 +1,5 @@
/* Buffer to buffer example - Test program for the lzlib library
- Copyright (C) 2010-2017 Antonio Diaz Diaz.
+ Copyright (C) 2010-2018 Antonio Diaz Diaz.
This program is free software: you have unlimited permission
to copy, distribute and modify it.
diff --git a/carg_parser.c b/carg_parser.c
index 6850643..10ad4dc 100644
--- a/carg_parser.c
+++ b/carg_parser.c
@@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C version)
- Copyright (C) 2006-2017 Antonio Diaz Diaz.
+ Copyright (C) 2006-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/carg_parser.h b/carg_parser.h
index c4ce31d..e1c70dd 100644
--- a/carg_parser.h
+++ b/carg_parser.h
@@ -1,5 +1,5 @@
/* Arg_parser - POSIX/GNU command line argument parser. (C version)
- Copyright (C) 2006-2017 Antonio Diaz Diaz.
+ Copyright (C) 2006-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/cbuffer.c b/cbuffer.c
index 5b8751e..5e7ab93 100644
--- a/cbuffer.c
+++ b/cbuffer.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/configure b/configure
index 244dca6..5b0c54b 100755
--- a/configure
+++ b/configure
@@ -1,12 +1,12 @@
#! /bin/sh
# configure script for Lzlib - Compression library for the lzip format
-# Copyright (C) 2009-2017 Antonio Diaz Diaz.
+# Copyright (C) 2009-2018 Antonio Diaz Diaz.
#
# This configure script is free software: you have unlimited permission
# to copy, distribute and modify it.
pkgname=lzlib
-pkgversion=1.9
+pkgversion=1.10
soversion=1
progname=minilzip
progname_static=${progname}
@@ -194,7 +194,7 @@ echo "LDFLAGS = ${LDFLAGS}"
rm -f Makefile
cat > Makefile << EOF
# Makefile for Lzlib - Compression library for the lzip format
-# Copyright (C) 2009-2017 Antonio Diaz Diaz.
+# Copyright (C) 2009-2018 Antonio Diaz Diaz.
# This file was generated automatically by configure. Don't edit.
#
# This Makefile is free software: you have unlimited permission
diff --git a/decoder.c b/decoder.c
index 971fc24..d659853 100644
--- a/decoder.c
+++ b/decoder.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/decoder.h b/decoder.h
index 8e422a8..090bf3a 100644
--- a/decoder.h
+++ b/decoder.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -319,11 +319,7 @@ static inline bool LZd_enough_free_bytes( const struct LZ_decoder * const d )
{ return Cb_free_bytes( &d->cb ) >= lzd_min_free_bytes; }
static inline uint8_t LZd_peek_prev( const struct LZ_decoder * const d )
- {
- if( d->cb.put > 0 ) return d->cb.buffer[d->cb.put-1];
- if( d->pos_wrapped ) return d->cb.buffer[d->cb.buffer_size-1];
- return 0; /* prev_byte of first byte */
- }
+ { return d->cb.buffer[((d->cb.put > 0) ? d->cb.put : d->cb.buffer_size)-1]; }
static inline uint8_t LZd_peek( const struct LZ_decoder * const d,
const unsigned distance )
@@ -387,6 +383,8 @@ static inline bool LZd_init( struct LZ_decoder * const d,
d->member_finished = false;
d->verify_trailer_pending = false;
d->pos_wrapped = false;
+ /* prev_byte of first byte; also for LZd_peek( 0 ) on corrupt file */
+ d->cb.buffer[d->cb.buffer_size-1] = 0;
d->rep0 = 0;
d->rep1 = 0;
d->rep2 = 0;
diff --git a/doc/lzlib.info b/doc/lzlib.info
index a2a8c68..23a4d21 100644
--- a/doc/lzlib.info
+++ b/doc/lzlib.info
@@ -11,25 +11,26 @@ File: lzlib.info, Node: Top, Next: Introduction, Up: (dir)
Lzlib Manual
************
-This manual is for Lzlib (version 1.9, 11 April 2017).
+This manual is for Lzlib (version 1.10, 7 February 2018).
* Menu:
-* Introduction:: Purpose and features of lzlib
-* Library version:: Checking library version
-* Buffering:: Sizes of lzlib's buffers
-* Parameter limits:: Min / max values for some parameters
-* Compression functions:: Descriptions of the compression functions
-* Decompression functions:: Descriptions of the decompression functions
-* Error codes:: Meaning of codes returned by functions
-* Error messages:: Error messages corresponding to error codes
-* Data format:: Detailed format of the compressed data
-* Examples:: A small tutorial with examples
-* Problems:: Reporting bugs
-* Concept index:: Index of concepts
+* Introduction:: Purpose and features of lzlib
+* Library version:: Checking library version
+* Buffering:: Sizes of lzlib's buffers
+* Parameter limits:: Min / max values for some parameters
+* Compression functions:: Descriptions of the compression functions
+* Decompression functions:: Descriptions of the decompression functions
+* Error codes:: Meaning of codes returned by functions
+* Error messages:: Error messages corresponding to error codes
+* Invoking minilzip:: Command line interface of the test program
+* Data format:: Detailed format of the compressed data
+* Examples:: A small tutorial with examples
+* Problems:: Reporting bugs
+* Concept index:: Index of concepts
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.
@@ -50,7 +51,7 @@ archiving, taking into account both data integrity and decoder
availability:
* The lzip format provides very safe integrity checking and some data
- recovery means. The lziprecover program can repair bit-flip errors
+ recovery means. The lziprecover program can repair bit flip errors
(one of the most common forms of data corruption) in lzip files,
and provides data recovery capabilities, including error-checked
merging of damaged copies of a file. *Note Data safety:
@@ -170,8 +171,9 @@ minimum sizes:
* Input compression buffer. Written to by the 'LZ_compress_write'
function. For the normal variant of LZMA, its size is two times
- the dictionary size set with the 'LZ_compress_open' function or 64
- KiB, whichever is larger. For the fast variant, its size is 1 MiB.
+ the dictionary size set with the 'LZ_compress_open' function or
+ 64 KiB, whichever is larger. For the fast variant, its size is
+ 1 MiB.
* Output compression buffer. Read from by the 'LZ_compress_read'
function. Its size is 64 KiB.
@@ -326,6 +328,7 @@ calling 'LZ_compress_errno' before using it.
ENCODER )
Returns 1 if all the data have been read and 'LZ_compress_close'
can be safely called. Otherwise it returns 0.
+ 'LZ_compress_finished' implies 'LZ_compress_member_finished'.
-- Function: int LZ_compress_member_finished ( struct LZ_Encoder *
const ENCODER )
@@ -532,14 +535,19 @@ whether a call failed. If the call failed, then you can examine
The end of the data stream was reached in the middle of a member.
-- Constant: enum LZ_Errno LZ_data_error
- The data stream is corrupt.
+ The data stream is corrupt. If 'LZ_decompress_member_position' is 6
+ or less, it indicates either a format version not supported, an
+ invalid dictionary size, a corrupt header in a multimember data
+ stream, or trailing data too similar to a valid lzip header.
+ Lziprecover can be used to remove conflicting trailing data from a
+ file.
-- Constant: enum LZ_Errno LZ_library_error
A bug was detected in the library. Please, report it (*note
Problems::).

-File: lzlib.info, Node: Error messages, Next: Data format, Prev: Error codes, Up: Top
+File: lzlib.info, Node: Error messages, Next: Invoking minilzip, Prev: Error codes, Up: Top
8 Error messages
****************
@@ -555,10 +563,198 @@ File: lzlib.info, Node: Error messages, Next: Data format, Prev: Error codes,
'LZ_(de)compress_errno'.

-File: lzlib.info, Node: Data format, Next: Examples, Prev: Error messages, Up: Top
+File: lzlib.info, Node: Invoking minilzip, Next: Data format, Prev: Error messages, Up: Top
+
+9 Invoking minilzip
+*******************
+
+The format for running minilzip is:
+
+ minilzip [OPTIONS] [FILES]
+
+'-' used as a FILE argument means standard input. It can be mixed with
+other FILES and is read just once, the first time it appears in the
+command line.
+
+ minilzip supports the following options:
+
+'-h'
+'--help'
+ Print an informative help message describing the options and exit.
+
+'-V'
+'--version'
+ Print the version number of minilzip on the standard output and
+ exit.
+
+'-a'
+'--trailing-error'
+ Exit with error status 2 if any remaining input is detected after
+ decompressing the last member. Such remaining input is usually
+ trailing garbage that can be safely ignored.
+
+'-b BYTES'
+'--member-size=BYTES'
+ When compressing, set the member size limit to BYTES. A small
+ member size may degrade compression ratio, so use it only when
+ needed. Valid values range from 100 kB to 2 PiB. Defaults to
+ 2 PiB.
+
+'-c'
+'--stdout'
+ Compress or decompress to standard output; keep input files
+ unchanged. If compressing several files, each file is compressed
+ independently. This option is needed when reading from a named
+ pipe (fifo) or from a device. Use it also to recover as much of
+ the decompressed data as possible when decompressing a corrupt
+ file.
+
+'-d'
+'--decompress'
+ Decompress the specified files. If a file does not exist or can't
+ be opened, minilzip continues decompressing the rest of the files.
+ If a file fails to decompress, or is a terminal, minilzip exits
+ immediately without decompressing the rest of the files.
+
+'-f'
+'--force'
+ Force overwrite of output files.
+
+'-F'
+'--recompress'
+ When compressing, force re-compression of files whose name already
+ has the '.lz' or '.tlz' suffix.
+
+'-k'
+'--keep'
+ Keep (don't delete) input files during compression or
+ decompression.
+
+'-m BYTES'
+'--match-length=BYTES'
+ When compressing, set the match length limit in bytes. After a
+ match this long is found, the search is finished. Valid values
+ range from 5 to 273. Larger values usually give better compression
+ ratios but longer compression times.
-9 Data format
-*************
+'-o FILE'
+'--output=FILE'
+ When reading from standard input and '--stdout' has not been
+ specified, use 'FILE' as the virtual name of the uncompressed
+ file. This produces a file named 'FILE' when decompressing, or a
+ file named 'FILE.lz' when compressing. A second '.lz' extension is
+ not added if 'FILE' already ends in '.lz' or '.tlz'. When
+ compressing and splitting the output in volumes, several files
+ named 'FILE00001.lz', 'FILE00002.lz', etc, are created.
+
+'-q'
+'--quiet'
+ Quiet operation. Suppress all messages.
+
+'-s BYTES'
+'--dictionary-size=BYTES'
+ When compressing, set the dictionary size limit in bytes. Minilzip
+ will use the smallest possible dictionary size for each file
+ without exceeding this limit. Valid values range from 4 KiB to
+ 512 MiB. Values 12 to 29 are interpreted as powers of two, meaning
+ 2^12 to 2^29 bytes. Note that dictionary sizes are quantized. If
+ the specified size does not match one of the valid sizes, it will
+ be rounded upwards by adding up to (BYTES / 8) to it.
+
+ For maximum compression you should use a dictionary size limit as
+ large as possible, but keep in mind that the decompression memory
+ requirement is affected at compression time by the choice of
+ dictionary size limit.
+
+'-S BYTES'
+'--volume-size=BYTES'
+ When compressing, split the compressed output into several volume
+ files with names 'original_name00001.lz', 'original_name00002.lz',
+ etc, and set the volume size limit to BYTES. Input files are kept
+ unchanged. Each volume is a complete, maybe multimember, lzip
+ file. A small volume size may degrade compression ratio, so use it
+ only when needed. Valid values range from 100 kB to 4 EiB.
+
+'-t'
+'--test'
+ Check integrity of the specified files, but don't decompress them.
+ This really performs a trial decompression and throws away the
+ result. Use it together with '-v' to see information about the
+ files. If a file fails the test, does not exist, can't be opened,
+ or is a terminal, minilzip continues checking the rest of the
+ files. A final diagnostic is shown at verbosity level 1 or higher
+ if any file fails the test when testing multiple files.
+
+'-v'
+'--verbose'
+ Verbose mode.
+ When compressing, show the compression ratio and size for each file
+ processed.
+ When decompressing or testing, further -v's (up to 4) increase the
+ verbosity level, showing status, compression ratio, dictionary
+ size, and trailer contents (CRC, data size, member size).
+
+'-0 .. -9'
+ Set the compression parameters (dictionary size and match length
+ limit) as shown in the table below. The default compression level
+ is '-6'. Note that '-9' can be much slower than '-0'. These
+ options have no effect when decompressing or testing.
+
+ The bidimensional parameter space of LZMA can't be mapped to a
+ linear scale optimal for all files. If your files are large, very
+ repetitive, etc, you may need to use the '--dictionary-size' and
+ '--match-length' options directly to achieve optimal performance.
+
+ Level Dictionary size Match length limit
+ -0 64 KiB 16 bytes
+ -1 1 MiB 5 bytes
+ -2 1.5 MiB 6 bytes
+ -3 2 MiB 8 bytes
+ -4 3 MiB 12 bytes
+ -5 4 MiB 20 bytes
+ -6 8 MiB 36 bytes
+ -7 16 MiB 68 bytes
+ -8 24 MiB 132 bytes
+ -9 32 MiB 273 bytes
+
+'--fast'
+'--best'
+ Aliases for GNU gzip compatibility.
+
+'--loose-trailing'
+ When decompressing or testing, allow trailing data whose first
+ bytes are so similar to the magic bytes of a lzip header that they
+ can be confused with a corrupt header. Use this option if a file
+ triggers a "corrupt header" error and the cause is not indeed a
+ corrupt header.
+
+
+ Numbers given as arguments to options may be followed by a multiplier
+and an optional 'B' for "byte".
+
+ Table of SI and binary prefixes (unit multipliers):
+
+Prefix Value | Prefix Value
+k kilobyte (10^3 = 1000) | Ki kibibyte (2^10 = 1024)
+M megabyte (10^6) | Mi mebibyte (2^20)
+G gigabyte (10^9) | Gi gibibyte (2^30)
+T terabyte (10^12) | Ti tebibyte (2^40)
+P petabyte (10^15) | Pi pebibyte (2^50)
+E exabyte (10^18) | Ei exbibyte (2^60)
+Z zettabyte (10^21) | Zi zebibyte (2^70)
+Y yottabyte (10^24) | Yi yobibyte (2^80)
+
+
+ Exit status: 0 for a normal exit, 1 for environmental problems (file
+not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (eg, bug) which
+caused minilzip to panic.
+
+
+File: lzlib.info, Node: Data format, Next: Examples, Prev: Invoking minilzip, Up: Top
+
+10 Data format
+**************
Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.
@@ -578,9 +774,9 @@ when there is no longer anything to take away.
represents a variable number of bytes.
- A lzip data stream consists of a series of "members" (compressed data
-sets). The members simply appear one after another in the data stream,
-with no additional information before, between, or after them.
+ A lzip data stream consists of a series of "members" (compressed
+data sets). The members simply appear one after another in the data
+stream, with no additional information before, between, or after them.
Each member has the following structure:
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@@ -630,7 +826,7 @@ with no additional information before, between, or after them.

File: lzlib.info, Node: Examples, Next: Problems, Prev: Data format, Up: Top
-10 A small tutorial with examples
+11 A small tutorial with examples
*********************************
This chapter shows the order in which the library functions should be
@@ -709,15 +905,15 @@ Example 5: Multimember compression (MEMBER_SIZE < total output).
Example 6: Multimember compression (user-restarted members).
- 1) LZ_compress_open
+ 1) LZ_compress_open (with MEMBER_SIZE > largest member).
2) LZ_compress_write
3) LZ_compress_read
4) go back to step 2 until member termination is desired
5) LZ_compress_finish
6) LZ_compress_read
7) go back to step 6 until LZ_compress_member_finished returns 1
- 8) verify that LZ_compress_finished returns 1
- 9) go to step 12 if all input data have been written
+ 9) go to step 12 if all input data have been written and
+ LZ_compress_finished returns 1
10) LZ_compress_restart_member
11) go back to step 2
12) LZ_compress_close
@@ -750,7 +946,7 @@ next member in case of data error.

File: lzlib.info, Node: Problems, Next: Concept index, Prev: Examples, Up: Top
-11 Reporting bugs
+12 Reporting bugs
*****************
There are probably bugs in lzlib. There are certainly errors and
@@ -783,25 +979,29 @@ Concept index
* examples: Examples. (line 6)
* getting help: Problems. (line 6)
* introduction: Introduction. (line 6)
+* invoking: Invoking minilzip. (line 6)
* library version: Library version. (line 6)
+* options: Invoking minilzip. (line 6)
* parameter limits: Parameter limits. (line 6)

Tag Table:
Node: Top220
-Node: Introduction1303
-Node: Library version6115
-Node: Buffering6760
-Node: Parameter limits7980
-Node: Compression functions8939
-Node: Decompression functions15481
-Node: Error codes21651
-Node: Error messages23626
-Node: Data format24205
-Node: Examples26770
-Node: Problems30851
-Node: Concept index31423
+Node: Introduction1342
+Node: Library version6154
+Node: Buffering6799
+Node: Parameter limits8024
+Node: Compression functions8983
+Node: Decompression functions15592
+Node: Error codes21762
+Node: Error messages24064
+Node: Invoking minilzip24649
+Ref: --trailing-error25243
+Node: Data format31883
+Node: Examples34454
+Node: Problems38570
+Node: Concept index39142

End Tag Table
diff --git a/doc/lzlib.texi b/doc/lzlib.texi
index 8b4aaaf..34154cd 100644
--- a/doc/lzlib.texi
+++ b/doc/lzlib.texi
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 11 April 2017
-@set VERSION 1.9
+@set UPDATED 7 February 2018
+@set VERSION 1.10
@dircategory Data Compression
@direntry
@@ -35,22 +35,23 @@
This manual is for Lzlib (version @value{VERSION}, @value{UPDATED}).
@menu
-* Introduction:: Purpose and features of lzlib
-* Library version:: Checking library version
-* Buffering:: Sizes of lzlib's buffers
-* Parameter limits:: Min / max values for some parameters
-* Compression functions:: Descriptions of the compression functions
-* Decompression functions:: Descriptions of the decompression functions
-* Error codes:: Meaning of codes returned by functions
-* Error messages:: Error messages corresponding to error codes
-* Data format:: Detailed format of the compressed data
-* Examples:: A small tutorial with examples
-* Problems:: Reporting bugs
-* Concept index:: Index of concepts
+* Introduction:: Purpose and features of lzlib
+* Library version:: Checking library version
+* Buffering:: Sizes of lzlib's buffers
+* Parameter limits:: Min / max values for some parameters
+* Compression functions:: Descriptions of the compression functions
+* Decompression functions:: Descriptions of the decompression functions
+* Error codes:: Meaning of codes returned by functions
+* Error messages:: Error messages corresponding to error codes
+* Invoking minilzip:: Command line interface of the test program
+* Data format:: Detailed format of the compressed data
+* Examples:: A small tutorial with examples
+* Problems:: Reporting bugs
+* Concept index:: Index of concepts
@end menu
@sp 1
-Copyright @copyright{} 2009-2017 Antonio Diaz Diaz.
+Copyright @copyright{} 2009-2018 Antonio Diaz Diaz.
This manual is free documentation: you have unlimited permission
to copy, distribute and modify it.
@@ -74,7 +75,7 @@ availability:
The lzip format provides very safe integrity checking and some data
recovery means. The
@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Data-safety,,lziprecover}
-program can repair bit-flip errors (one of the most common forms of data
+program can repair bit flip errors (one of the most common forms of data
corruption) in lzip files, and provides data recovery capabilities,
including error-checked merging of damaged copies of a file.
@ifnothtml
@@ -201,18 +202,18 @@ sizes:
@item Input compression buffer. Written to by the
@samp{LZ_compress_write} function. For the normal variant of LZMA, its
size is two times the dictionary size set with the
-@samp{LZ_compress_open} function or 64 KiB, whichever is larger. For the
-fast variant, its size is 1 MiB.
+@samp{LZ_compress_open} function or @w{64 KiB}, whichever is larger. For
+the fast variant, its size is @w{1 MiB}.
@item Output compression buffer. Read from by the
-@samp{LZ_compress_read} function. Its size is 64 KiB.
+@samp{LZ_compress_read} function. Its size is @w{64 KiB}.
@item Input decompression buffer. Written to by the
-@samp{LZ_decompress_write} function. Its size is 64 KiB.
+@samp{LZ_decompress_write} function. Its size is @w{64 KiB}.
@item Output decompression buffer. Read from by the
@samp{LZ_decompress_read} function. Its size is the dictionary size set
-in the header of the member currently being decompressed or 64 KiB,
+in the header of the member currently being decompressed or @w{64 KiB},
whichever is larger.
@end itemize
@@ -271,10 +272,10 @@ does not return @samp{LZ_ok}, the returned pointer must not be used and
should be freed with @samp{LZ_compress_close} to avoid memory leaks.
@var{dictionary_size} sets the dictionary size to be used, in bytes.
-Valid values range from 4 KiB to 512 MiB. Note that dictionary sizes are
-quantized. If the specified size does not match one of the valid sizes,
-it will be rounded upwards by adding up to (@var{dictionary_size} / 8)
-to it.
+Valid values range from @w{4 KiB} to @w{512 MiB}. Note that dictionary
+sizes are quantized. If the specified size does not match one of the
+valid sizes, it will be rounded upwards by adding up to
+@w{(@var{dictionary_size} / 8)} to it.
@var{match_len_limit} sets the match length limit in bytes. Valid values
range from 5 to 273. Larger values usually give better compression
@@ -283,13 +284,13 @@ ratios but longer compression times.
If @var{dictionary_size} is 65535 and @var{match_len_limit} is 16, the
fast variant of LZMA is chosen, which produces identical compressed
output as @code{lzip -0}. (The dictionary size used will be rounded
-upwards to 64 KiB).
+upwards to @w{64 KiB}).
@var{member_size} sets the member size limit in bytes. Minimum member
-size limit is 100 kB. Small member size may degrade compression ratio, so
-use it only when needed. To produce a single-member data stream, give
-@var{member_size} a value larger than the amount of data to be produced,
-for example INT64_MAX.
+size limit is @w{100 kB}. Small member size may degrade compression
+ratio, so use it only when needed. To produce a single-member data
+stream, give @var{member_size} a value larger than the amount of data to
+be produced, for example INT64_MAX.
@end deftypefun
@@ -369,7 +370,8 @@ Returns the current error code for @var{encoder} (@pxref{Error codes}).
@deftypefun int LZ_compress_finished ( struct LZ_Encoder * const @var{encoder} )
Returns 1 if all the data have been read and @samp{LZ_compress_close}
-can be safely called. Otherwise it returns 0.
+can be safely called. Otherwise it returns 0. @samp{LZ_compress_finished}
+implies @samp{LZ_compress_member_finished}.
@end deftypefun
@@ -606,7 +608,11 @@ The end of the data stream was reached in the middle of a member.
@end deftypevr
@deftypevr Constant {enum LZ_Errno} LZ_data_error
-The data stream is corrupt.
+The data stream is corrupt. If @samp{LZ_decompress_member_position} is 6
+or less, it indicates either a format version not supported, an invalid
+dictionary size, a corrupt header in a multimember data stream, or
+trailing data too similar to a valid lzip header. Lziprecover can be
+used to remove conflicting trailing data from a file.
@end deftypevr
@deftypevr Constant {enum LZ_Errno} LZ_library_error
@@ -629,6 +635,199 @@ The value of @var{lz_errno} normally comes from a call to
@end deftypefun
+@node Invoking minilzip
+@chapter Invoking minilzip
+@cindex invoking
+@cindex options
+
+The format for running minilzip is:
+
+@example
+minilzip [@var{options}] [@var{files}]
+@end example
+
+@noindent
+@samp{-} used as a @var{file} argument means standard input. It can be
+mixed with other @var{files} and is read just once, the first time it
+appears in the command line.
+
+minilzip supports the following options:
+
+@table @code
+@item -h
+@itemx --help
+Print an informative help message describing the options and exit.
+
+@item -V
+@itemx --version
+Print the version number of minilzip on the standard output and exit.
+
+@anchor{--trailing-error}
+@item -a
+@itemx --trailing-error
+Exit with error status 2 if any remaining input is detected after
+decompressing the last member. Such remaining input is usually trailing
+garbage that can be safely ignored.
+
+@item -b @var{bytes}
+@itemx --member-size=@var{bytes}
+When compressing, set the member size limit to @var{bytes}. A small
+member size may degrade compression ratio, so use it only when needed.
+Valid values range from @w{100 kB} to @w{2 PiB}. Defaults to @w{2 PiB}.
+
+@item -c
+@itemx --stdout
+Compress or decompress to standard output; keep input files unchanged.
+If compressing several files, each file is compressed independently.
+This option is needed when reading from a named pipe (fifo) or from a
+device. Use it also to recover as much of the decompressed data as
+possible when decompressing a corrupt file.
+
+@item -d
+@itemx --decompress
+Decompress the specified files. If a file does not exist or can't be
+opened, minilzip continues decompressing the rest of the files. If a file
+fails to decompress, or is a terminal, minilzip exits immediately without
+decompressing the rest of the files.
+
+@item -f
+@itemx --force
+Force overwrite of output files.
+
+@item -F
+@itemx --recompress
+When compressing, force re-compression of files whose name already has
+the @samp{.lz} or @samp{.tlz} suffix.
+
+@item -k
+@itemx --keep
+Keep (don't delete) input files during compression or decompression.
+
+@item -m @var{bytes}
+@itemx --match-length=@var{bytes}
+When compressing, set the match length limit in bytes. After a match
+this long is found, the search is finished. Valid values range from 5 to
+273. Larger values usually give better compression ratios but longer
+compression times.
+
+@item -o @var{file}
+@itemx --output=@var{file}
+When reading from standard input and @samp{--stdout} has not been
+specified, use @samp{@var{file}} as the virtual name of the uncompressed
+file. This produces a file named @samp{@var{file}} when decompressing,
+or a file named @samp{@var{file}.lz} when compressing. A second
+@samp{.lz} extension is not added if @samp{@var{file}} already ends in
+@samp{.lz} or @samp{.tlz}. When compressing and splitting the output in
+volumes, several files named @samp{@var{file}00001.lz},
+@samp{@var{file}00002.lz}, etc, are created.
+
+@item -q
+@itemx --quiet
+Quiet operation. Suppress all messages.
+
+@item -s @var{bytes}
+@itemx --dictionary-size=@var{bytes}
+When compressing, set the dictionary size limit in bytes. Minilzip will use
+the smallest possible dictionary size for each file without exceeding
+this limit. Valid values range from @w{4 KiB} to @w{512 MiB}. Values 12
+to 29 are interpreted as powers of two, meaning 2^12 to 2^29 bytes. Note
+that dictionary sizes are quantized. If the specified size does not
+match one of the valid sizes, it will be rounded upwards by adding up to
+@w{(@var{bytes} / 8)} to it.
+
+For maximum compression you should use a dictionary size limit as large
+as possible, but keep in mind that the decompression memory requirement
+is affected at compression time by the choice of dictionary size limit.
+
+@item -S @var{bytes}
+@itemx --volume-size=@var{bytes}
+When compressing, split the compressed output into several volume files
+with names @samp{original_name00001.lz}, @samp{original_name00002.lz},
+etc, and set the volume size limit to @var{bytes}. Input files are kept
+unchanged. Each volume is a complete, maybe multimember, lzip file. A
+small volume size may degrade compression ratio, so use it only when
+needed. Valid values range from @w{100 kB} to @w{4 EiB}.
+
+@item -t
+@itemx --test
+Check integrity of the specified files, but don't decompress them. This
+really performs a trial decompression and throws away the result. Use it
+together with @samp{-v} to see information about the files. If a file
+fails the test, does not exist, can't be opened, or is a terminal, minilzip
+continues checking the rest of the files. A final diagnostic is shown at
+verbosity level 1 or higher if any file fails the test when testing
+multiple files.
+
+@item -v
+@itemx --verbose
+Verbose mode.@*
+When compressing, show the compression ratio and size for each file
+processed.@*
+When decompressing or testing, further -v's (up to 4) increase the
+verbosity level, showing status, compression ratio, dictionary size,
+and trailer contents (CRC, data size, member size).
+
+@item -0 .. -9
+Set the compression parameters (dictionary size and match length limit)
+as shown in the table below. The default compression level is @samp{-6}.
+Note that @samp{-9} can be much slower than @samp{-0}. These options
+have no effect when decompressing or testing.
+
+The bidimensional parameter space of LZMA can't be mapped to a linear
+scale optimal for all files. If your files are large, very repetitive,
+etc, you may need to use the @samp{--dictionary-size} and
+@samp{--match-length} options directly to achieve optimal performance.
+
+@multitable {Level} {Dictionary size} {Match length limit}
+@item Level @tab Dictionary size @tab Match length limit
+@item -0 @tab 64 KiB @tab 16 bytes
+@item -1 @tab 1 MiB @tab 5 bytes
+@item -2 @tab 1.5 MiB @tab 6 bytes
+@item -3 @tab 2 MiB @tab 8 bytes
+@item -4 @tab 3 MiB @tab 12 bytes
+@item -5 @tab 4 MiB @tab 20 bytes
+@item -6 @tab 8 MiB @tab 36 bytes
+@item -7 @tab 16 MiB @tab 68 bytes
+@item -8 @tab 24 MiB @tab 132 bytes
+@item -9 @tab 32 MiB @tab 273 bytes
+@end multitable
+
+@item --fast
+@itemx --best
+Aliases for GNU gzip compatibility.
+
+@item --loose-trailing
+When decompressing or testing, allow trailing data whose first bytes are
+so similar to the magic bytes of a lzip header that they can be confused
+with a corrupt header. Use this option if a file triggers a "corrupt
+header" error and the cause is not indeed a corrupt header.
+
+@end table
+
+Numbers given as arguments to options may be followed by a multiplier
+and an optional @samp{B} for "byte".
+
+Table of SI and binary prefixes (unit multipliers):
+
+@multitable {Prefix} {kilobyte (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)}
+@item Prefix @tab Value @tab | @tab Prefix @tab Value
+@item k @tab kilobyte (10^3 = 1000) @tab | @tab Ki @tab kibibyte (2^10 = 1024)
+@item M @tab megabyte (10^6) @tab | @tab Mi @tab mebibyte (2^20)
+@item G @tab gigabyte (10^9) @tab | @tab Gi @tab gibibyte (2^30)
+@item T @tab terabyte (10^12) @tab | @tab Ti @tab tebibyte (2^40)
+@item P @tab petabyte (10^15) @tab | @tab Pi @tab pebibyte (2^50)
+@item E @tab exabyte (10^18) @tab | @tab Ei @tab exbibyte (2^60)
+@item Z @tab zettabyte (10^21) @tab | @tab Zi @tab zebibyte (2^70)
+@item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80)
+@end multitable
+
+@sp 1
+Exit status: 0 for a normal exit, 1 for environmental problems (file not
+found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (eg, bug) which
+caused minilzip to panic.
+
+
@node Data format
@chapter Data format
@cindex data format
@@ -655,9 +854,9 @@ represents one byte; a box like this:
represents a variable number of bytes.
@sp 1
-A lzip data stream consists of a series of "members" (compressed data
-sets). The members simply appear one after another in the data stream,
-with no additional information before, between, or after them.
+A lzip data stream consists of a series of "members" (compressed data sets).
+The members simply appear one after another in the data stream, with no
+additional information before, between, or after them.
Each member has the following structure:
@verbatim
@@ -810,15 +1009,15 @@ Example 5: Multimember compression (@var{member_size} < total output).
Example 6: Multimember compression (user-restarted members).
@example
- 1) LZ_compress_open
+ 1) LZ_compress_open (with @var{member_size} > largest member).
2) LZ_compress_write
3) LZ_compress_read
4) go back to step 2 until member termination is desired
5) LZ_compress_finish
6) LZ_compress_read
7) go back to step 6 until LZ_compress_member_finished returns 1
- 8) verify that LZ_compress_finished returns 1
- 9) go to step 12 if all input data have been written
+ 9) go to step 12 if all input data have been written and
+ LZ_compress_finished returns 1
10) LZ_compress_restart_member
11) go back to step 2
12) LZ_compress_close
diff --git a/doc/minilzip.1 b/doc/minilzip.1
index 3fefa02..a5f30c8 100644
--- a/doc/minilzip.1
+++ b/doc/minilzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.46.1.
-.TH MINILZIP "1" "April 2017" "minilzip 1.9" "User Commands"
+.TH MINILZIP "1" "February 2018" "minilzip 1.10" "User Commands"
.SH NAME
minilzip \- reduces the size of files
.SH SYNOPSIS
@@ -49,7 +49,7 @@ suppress all messages
set dictionary size limit in bytes [8 MiB]
.TP
\fB\-S\fR, \fB\-\-volume\-size=\fR<bytes>
-set volume size limit in bytes
+set volume size limit in bytes, implies \fB\-k\fR
.TP
\fB\-t\fR, \fB\-\-test\fR
test compressed file integrity
@@ -65,6 +65,9 @@ alias for \fB\-0\fR
.TP
\fB\-\-best\fR
alias for \fB\-9\fR
+.TP
+\fB\-\-loose\-trailing\fR
+allow trailing data seeming corrupt header
.PP
If no file names are given, or if a file is '\-', minilzip compresses or
decompresses from standard input to standard output.
@@ -87,8 +90,8 @@ Report bugs to lzip\-bug@nongnu.org
.br
Lzlib home page: http://www.nongnu.org/lzip/lzlib.html
.SH COPYRIGHT
-Copyright \(co 2017 Antonio Diaz Diaz.
-Using lzlib 1.9
+Copyright \(co 2018 Antonio Diaz Diaz.
+Using lzlib 1.10
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
diff --git a/encoder.c b/encoder.c
index cb4d222..7d19235 100644
--- a/encoder.c
+++ b/encoder.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/encoder.h b/encoder.h
index dd02efb..8948013 100644
--- a/encoder.h
+++ b/encoder.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -287,7 +287,7 @@ static inline bool LZe_init( struct LZ_encoder * const e,
const int dict_size, const int len_limit,
const unsigned long long member_size )
{
- enum { before = max_num_trials,
+ enum { before_size = max_num_trials,
/* bytes to keep in buffer after pos */
after_size = max_num_trials + ( 2 * max_match_len ) + 1,
dict_factor = 2,
@@ -295,7 +295,7 @@ static inline bool LZe_init( struct LZ_encoder * const e,
pos_array_factor = 2,
min_free_bytes = 2 * max_num_trials };
- if( !LZeb_init( &e->eb, before, dict_size, after_size, dict_factor,
+ if( !LZeb_init( &e->eb, before_size, dict_size, after_size, dict_factor,
num_prev_positions23, pos_array_factor, min_free_bytes,
member_size ) ) return false;
e->cycles = ( len_limit < max_match_len ) ? 16 + ( len_limit / 2 ) : 256;
diff --git a/encoder_base.c b/encoder_base.c
index be9af5d..0dbc617 100644
--- a/encoder_base.c
+++ b/encoder_base.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -39,39 +39,39 @@ static bool Mb_normalize_pos( struct Matchfinder_base * const mb )
}
-static bool Mb_init( struct Matchfinder_base * const mb,
- const int before, const int dict_size,
- const int after_size, const int dict_factor,
- const int num_prev_positions23,
+static bool Mb_init( struct Matchfinder_base * const mb, const int before_size,
+ const int dict_size, const int after_size,
+ const int dict_factor, const int num_prev_positions23,
const int pos_array_factor )
{
const int buffer_size_limit =
- ( dict_factor * dict_size ) + before + after_size;
+ ( dict_factor * dict_size ) + before_size + after_size;
unsigned size;
int i;
mb->partial_data_pos = 0;
- mb->before_size = before;
+ mb->before_size = before_size;
mb->after_size = after_size;
mb->pos = 0;
mb->cyclic_pos = 0;
mb->stream_pos = 0;
+ mb->num_prev_positions23 = num_prev_positions23;
mb->at_stream_end = false;
mb->flushing = false;
mb->buffer_size = max( 65536, buffer_size_limit );
mb->buffer = (uint8_t *)malloc( mb->buffer_size );
if( !mb->buffer ) return false;
+ mb->saved_dictionary_size = dict_size;
mb->dictionary_size = dict_size;
mb->pos_limit = mb->buffer_size - after_size;
size = 1 << max( 16, real_bits( mb->dictionary_size - 1 ) - 2 );
if( mb->dictionary_size > 1 << 26 ) /* 64 MiB */
size >>= 1;
mb->key4_mask = size - 1;
- mb->num_prev_positions23 = num_prev_positions23;
size += num_prev_positions23;
-
mb->num_prev_positions = size;
+
mb->pos_array_size = pos_array_factor * ( mb->dictionary_size + 1 );
size += mb->pos_array_size;
if( size * sizeof mb->prev_positions[0] <= size ) mb->prev_positions = 0;
@@ -84,21 +84,25 @@ static bool Mb_init( struct Matchfinder_base * const mb,
}
+static void Mb_adjust_array( struct Matchfinder_base * const mb )
+ {
+ int size = 1 << max( 16, real_bits( mb->dictionary_size - 1 ) - 2 );
+ if( mb->dictionary_size > 1 << 26 ) /* 64 MiB */
+ size >>= 1;
+ mb->key4_mask = size - 1;
+ size += mb->num_prev_positions23;
+ mb->num_prev_positions = size;
+ mb->pos_array = mb->prev_positions + mb->num_prev_positions;
+ }
+
+
static void Mb_adjust_dictionary_size( struct Matchfinder_base * const mb )
{
if( mb->stream_pos < mb->dictionary_size )
{
- int size;
- mb->buffer_size =
- mb->dictionary_size =
- mb->pos_limit = max( min_dictionary_size, mb->stream_pos );
- size = 1 << max( 16, real_bits( mb->dictionary_size - 1 ) - 2 );
- if( mb->dictionary_size > 1 << 26 ) /* 64 MiB */
- size >>= 1;
- mb->key4_mask = size - 1;
- size += mb->num_prev_positions23;
- mb->num_prev_positions = size;
- mb->pos_array = mb->prev_positions + mb->num_prev_positions;
+ mb->dictionary_size = max( min_dictionary_size, mb->stream_pos );
+ Mb_adjust_array( mb );
+ mb->pos_limit = mb->buffer_size;
}
}
@@ -114,6 +118,9 @@ static void Mb_reset( struct Matchfinder_base * const mb )
mb->cyclic_pos = 0;
mb->at_stream_end = false;
mb->flushing = false;
+ mb->dictionary_size = mb->saved_dictionary_size;
+ Mb_adjust_array( mb );
+ mb->pos_limit = mb->buffer_size - mb->after_size;
for( i = 0; i < mb->num_prev_positions; ++i ) mb->prev_positions[i] = 0;
}
@@ -180,7 +187,7 @@ static void LZeb_reset( struct LZ_encoder_base * const eb,
Bm_array_init( eb->bm_align, dis_align_size );
Lm_init( &eb->match_len_model );
Lm_init( &eb->rep_len_model );
- Re_reset( &eb->renc );
+ Re_reset( &eb->renc, eb->mb.dictionary_size );
for( i = 0; i < num_rep_distances; ++i ) eb->reps[i] = 0;
eb->state = 0;
eb->member_finished = false;
diff --git a/encoder_base.h b/encoder_base.h
index c4cfcca..ddba7e6 100644
--- a/encoder_base.h
+++ b/encoder_base.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -238,16 +238,16 @@ struct Matchfinder_base
int num_prev_positions23;
int num_prev_positions; /* size of prev_positions */
int pos_array_size;
+ int saved_dictionary_size; /* dictionary_size restored by Mb_reset */
bool at_stream_end; /* stream_pos shows real end of file */
bool flushing;
};
static bool Mb_normalize_pos( struct Matchfinder_base * const mb );
-static bool Mb_init( struct Matchfinder_base * const mb,
- const int before, const int dict_size,
- const int after_size, const int dict_factor,
- const int num_prev_positions23,
+static bool Mb_init( struct Matchfinder_base * const mb, const int before_size,
+ const int dict_size, const int after_size,
+ const int dict_factor, const int num_prev_positions23,
const int pos_array_factor );
static inline void Mb_free( struct Matchfinder_base * const mb )
@@ -339,7 +339,8 @@ static inline void Re_shift_low( struct Range_encoder * const renc )
renc->low = ( renc->low & 0x00FFFFFFU ) << 8;
}
-static inline void Re_reset( struct Range_encoder * const renc )
+static inline void Re_reset( struct Range_encoder * const renc,
+ const unsigned dictionary_size )
{
int i;
Cb_reset( &renc->cb );
@@ -348,6 +349,7 @@ static inline void Re_reset( struct Range_encoder * const renc )
renc->range = 0xFFFFFFFFU;
renc->ff_count = 0;
renc->cache = 0;
+ Fh_set_dictionary_size( renc->header, dictionary_size );
for( i = 0; i < Fh_size; ++i )
Cb_put_byte( &renc->cb, renc->header[i] );
}
@@ -359,8 +361,7 @@ static inline bool Re_init( struct Range_encoder * const renc,
if( !Cb_init( &renc->cb, 65536 + min_free_bytes ) ) return false;
renc->min_free_bytes = min_free_bytes;
Fh_set_magic( renc->header );
- Fh_set_dictionary_size( renc->header, dictionary_size );
- Re_reset( renc );
+ Re_reset( renc, dictionary_size );
return true;
}
@@ -544,14 +545,14 @@ static void LZeb_reset( struct LZ_encoder_base * const eb,
const unsigned long long member_size );
static inline bool LZeb_init( struct LZ_encoder_base * const eb,
- const int before, const int dict_size,
+ const int before_size, const int dict_size,
const int after_size, const int dict_factor,
const int num_prev_positions23,
const int pos_array_factor,
const unsigned min_free_bytes,
const unsigned long long member_size )
{
- if( !Mb_init( &eb->mb, before, dict_size, after_size, dict_factor,
+ if( !Mb_init( &eb->mb, before_size, dict_size, after_size, dict_factor,
num_prev_positions23, pos_array_factor ) ) return false;
if( !Re_init( &eb->renc, eb->mb.dictionary_size, min_free_bytes ) )
return false;
diff --git a/fast_encoder.c b/fast_encoder.c
index af81137..1ba80e0 100644
--- a/fast_encoder.c
+++ b/fast_encoder.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
diff --git a/fast_encoder.h b/fast_encoder.h
index c02e9cb..47dfb3e 100644
--- a/fast_encoder.h
+++ b/fast_encoder.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -53,7 +53,7 @@ static inline bool FLZe_update_and_move( struct FLZ_encoder * const fe, int n )
static inline bool FLZe_init( struct FLZ_encoder * const fe,
const unsigned long long member_size )
{
- enum { before = 0,
+ enum { before_size = 0,
dict_size = 65536,
/* bytes to keep in buffer after pos */
after_size = max_match_len,
@@ -62,7 +62,7 @@ static inline bool FLZe_init( struct FLZ_encoder * const fe,
pos_array_factor = 1,
min_free_bytes = max_marker_size };
- return LZeb_init( &fe->eb, before, dict_size, after_size, dict_factor,
+ return LZeb_init( &fe->eb, before_size, dict_size, after_size, dict_factor,
num_prev_positions23, pos_array_factor, min_free_bytes,
member_size );
}
diff --git a/lzcheck.c b/lzcheck.c
index 9db661f..83e206d 100644
--- a/lzcheck.c
+++ b/lzcheck.c
@@ -1,19 +1,20 @@
/* Lzcheck - Test program for the lzlib library
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This program is free software: you have unlimited permission
to copy, distribute and modify it.
Usage is:
- lzcheck filename.txt
+ lzcheck filename.txt...
- This program reads the specified text file and then compresses it,
+ This program reads each specified text file and then compresses it,
line by line, to test the flushing mechanism and the member
restart/reset/sync functions.
*/
#define _FILE_OFFSET_BITS 64
+#include <ctype.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
@@ -34,6 +35,15 @@ uint8_t mid_buffer[buffer_size];
uint8_t out_buffer[buffer_size];
+void show_line( const uint8_t * const buffer, const int size )
+ {
+ int i;
+ for( i = 0; i < size; ++i )
+ fputc( isprint( buffer[i] ) ? buffer[i] : '.', stderr );
+ fputc( '\n', stderr );
+ }
+
+
int lzcheck( FILE * const file, const int dictionary_size )
{
const int match_len_limit = 16;
@@ -66,7 +76,7 @@ int lzcheck( FILE * const file, const int dictionary_size )
while( retval <= 1 )
{
- int i, l, r;
+ int l, r;
const int read_size = fread( in_buffer, 1, buffer_size, file );
if( read_size <= 0 ) break; /* end of file */
@@ -95,15 +105,11 @@ int lzcheck( FILE * const file, const int dictionary_size )
if( out_size != in_size || memcmp( in_buffer + l, out_buffer, out_size ) )
{
- fprintf( stderr, "lzcheck: Sync error at pos %d in_size = %d, out_size = %d\n",
+ fprintf( stderr, "lzcheck: Sync error at pos %d in_size = %d, "
+ "out_size = %d\n",
l, in_size, out_size );
- for( i = 0; i < in_size; ++i )
- fputc( in_buffer[l+i], stderr );
- if( in_buffer[l+in_size-1] != '\n' )
- fputc( '\n', stderr );
- for( i = 0; i < out_size; ++i )
- fputc( out_buffer[i], stderr );
- fputc( '\n', stderr );
+ show_line( in_buffer + l, in_size );
+ show_line( out_buffer, out_size );
retval = 1;
}
}
@@ -113,7 +119,8 @@ int lzcheck( FILE * const file, const int dictionary_size )
{
rewind( file );
if( LZ_compress_finish( encoder ) < 0 ||
- LZ_decompress_write( decoder, mid_buffer, LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
+ LZ_decompress_write( decoder, mid_buffer,
+ LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
LZ_decompress_read( decoder, out_buffer, buffer_size ) != 0 ||
LZ_compress_restart_member( encoder, member_size ) < 0 )
{
@@ -125,7 +132,7 @@ int lzcheck( FILE * const file, const int dictionary_size )
while( retval <= 1 )
{
- int i, l, r, size;
+ int l, r, size;
const int read_size = fread( in_buffer, 1, buffer_size / 2, file );
if( read_size <= 0 ) break; /* end of file */
@@ -133,7 +140,7 @@ int lzcheck( FILE * const file, const int dictionary_size )
{
int leading_garbage, in_size, mid_size, out_size;
while( r < read_size && in_buffer[r-1] != '\n' ) ++r;
- leading_garbage = (l == 0) ? min( r, read_size / 2 ) : 0;
+ leading_garbage = (l == 0) ? min( r, read_size ) / 2 : 0;
in_size = LZ_compress_write( encoder, in_buffer + l, r - l );
if( in_size < r - l ) r = l + in_size;
LZ_compress_sync_flush( encoder );
@@ -167,22 +174,19 @@ int lzcheck( FILE * const file, const int dictionary_size )
if( out_size != in_size || memcmp( in_buffer + l, out_buffer, out_size ) )
{
- fprintf( stderr, "lzcheck: Sync error at pos %d in_size = %d, out_size = %d, leading garbage = %d\n",
+ fprintf( stderr, "lzcheck: Sync error at pos %d in_size = %d, "
+ "out_size = %d, leading garbage = %d\n",
l, in_size, out_size, leading_garbage );
- for( i = 0; i < in_size; ++i )
- fputc( in_buffer[l+i], stderr );
- if( in_buffer[l+in_size-1] != '\n' )
- fputc( '\n', stderr );
- for( i = 0; i < out_size; ++i )
- fputc( out_buffer[i], stderr );
- fputc( '\n', stderr );
+ show_line( in_buffer + l, in_size );
+ show_line( out_buffer, out_size );
retval = 1;
}
}
if( retval >= 3 ) break;
if( LZ_compress_finish( encoder ) < 0 ||
- LZ_decompress_write( decoder, mid_buffer, LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
+ LZ_decompress_write( decoder, mid_buffer,
+ LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
LZ_decompress_read( decoder, out_buffer, buffer_size ) != 0 ||
LZ_decompress_reset( decoder ) < 0 ||
LZ_compress_restart_member( encoder, member_size ) < 0 )
@@ -195,7 +199,8 @@ int lzcheck( FILE * const file, const int dictionary_size )
size = min( 100, read_size );
if( LZ_compress_write( encoder, in_buffer, size ) != size ||
LZ_compress_finish( encoder ) < 0 ||
- LZ_decompress_write( decoder, mid_buffer, LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
+ LZ_decompress_write( decoder, mid_buffer,
+ LZ_compress_read( encoder, mid_buffer, buffer_size ) ) < 0 ||
LZ_decompress_read( decoder, out_buffer, 0 ) != 0 ||
LZ_decompress_sync_to_member( decoder ) < 0 ||
LZ_compress_restart_member( encoder, member_size ) < 0 )
@@ -214,26 +219,34 @@ int lzcheck( FILE * const file, const int dictionary_size )
int main( const int argc, const char * const argv[] )
{
- FILE * file;
- int retval;
+ int retval = 0, i;
+ int open_failures = 0;
+ const bool verbose = ( argc > 2 );
if( argc < 2 )
{
- fputs( "Usage: lzcheck filename.txt\n", stderr );
+ fputs( "Usage: lzcheck filename.txt...\n", stderr );
return 1;
}
- file = fopen( argv[1], "rb" );
- if( !file )
+ for( i = 1; i < argc && retval == 0; ++ i )
{
- fprintf( stderr, "lzcheck: Can't open file '%s' for reading.\n", argv[1] );
- return 1;
- }
-/* fprintf( stderr, "lzcheck: Testing file '%s'\n", argv[1] ); */
+ FILE * file = fopen( argv[i], "rb" );
+ if( !file )
+ {
+ fprintf( stderr, "lzcheck: Can't open file '%s' for reading.\n", argv[i] );
+ ++open_failures; continue;
+ }
+ if( verbose ) fprintf( stderr, " Testing file '%s'\n", argv[i] );
- retval = lzcheck( file, 65535 ); /* 65535,16 chooses fast encoder */
- if( retval == 0 )
- { rewind( file ); retval = lzcheck( file, 1 << 20 ); }
- fclose( file );
+ retval = lzcheck( file, 65535 ); /* 65535,16 chooses fast encoder */
+ if( retval == 0 )
+ { rewind( file ); retval = lzcheck( file, 1 << 20 ); }
+ fclose( file );
+ }
+ if( open_failures > 0 && verbose )
+ fprintf( stderr, "lzcheck: warning: %d %s failed to open.\n",
+ open_failures, ( open_failures == 1 ) ? "file" : "files" );
+ if( retval == 0 && open_failures ) retval = 1;
return retval;
}
diff --git a/lzip.h b/lzip.h
index 5fc1379..3fdf70f 100644
--- a/lzip.h
+++ b/lzip.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -204,12 +204,21 @@ static inline void Fh_set_magic( File_header data )
static inline bool Fh_verify_magic( const File_header data )
{ return ( memcmp( data, magic_string, 4 ) == 0 ); }
-/* detect truncated header */
-static inline bool Fh_verify_prefix( const File_header data, const int size )
+/* detect (truncated) header */
+static inline bool Fh_verify_prefix( const File_header data, const int sz )
{
- int i; for( i = 0; i < size && i < 4; ++i )
+ int i; for( i = 0; i < sz && i < 4; ++i )
if( data[i] != magic_string[i] ) return false;
- return ( size > 0 );
+ return ( sz > 0 );
+ }
+
+/* detect corrupt header */
+static inline bool Fh_verify_corrupt( const File_header data )
+ {
+ int matches = 0;
+ int i; for( i = 0; i < 4; ++i )
+ if( data[i] == magic_string[i] ) ++matches;
+ return ( matches > 1 && matches < 4 );
}
static inline uint8_t Fh_version( const File_header data )
diff --git a/lzlib.c b/lzlib.c
index 1a3080a..757ad25 100644
--- a/lzlib.c
+++ b/lzlib.c
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -193,7 +193,7 @@ int LZ_compress_finish( struct LZ_Encoder * const e )
/* if (open --> write --> finish) use same dictionary size as lzip. */
/* this does not save any memory. */
if( Mb_data_position( &e->lz_encoder_base->mb ) == 0 &&
- LZ_compress_total_out_size( e ) == Fh_size )
+ Re_member_position( &e->lz_encoder_base->renc ) == Fh_size )
{
Mb_adjust_dictionary_size( &e->lz_encoder_base->mb );
Fh_set_dictionary_size( e->lz_encoder_base->renc.header,
@@ -417,7 +417,7 @@ int LZ_decompress_read( struct LZ_Decoder * const d,
!d->rdec->at_stream_end ) return 0;
if( Rd_finished( d->rdec ) && !d->first_header ) return 0;
rd = Rd_read_data( d->rdec, d->member_header, Fh_size );
- if( Rd_finished( d->rdec ) )
+ if( Rd_finished( d->rdec ) ) /* End Of File */
{
if( rd <= 0 || Fh_verify_prefix( d->member_header, rd ) )
d->lz_errno = LZ_unexpected_eof;
@@ -431,7 +431,12 @@ int LZ_decompress_read( struct LZ_Decoder * const d,
/* unreading the header prevents sync_to_member from skipping a member
if leading garbage is shorter than a full header; "lgLZIP\x01\x0C" */
if( Rd_unread_data( d->rdec, rd ) )
- d->lz_errno = LZ_header_error;
+ {
+ if( d->first_header || !Fh_verify_corrupt( d->member_header ) )
+ d->lz_errno = LZ_header_error;
+ else
+ d->lz_errno = LZ_data_error; /* corrupt header */
+ }
else
d->lz_errno = LZ_library_error;
d->fatal = true;
@@ -440,7 +445,10 @@ int LZ_decompress_read( struct LZ_Decoder * const d,
if( !Fh_verify_version( d->member_header ) ||
!isvalid_ds( Fh_get_dictionary_size( d->member_header ) ) )
{
- d->lz_errno = LZ_data_error; /* bad version or bad dict size */
+ if( Rd_unread_data( d->rdec, 1 + !Fh_verify_version( d->member_header ) ) )
+ d->lz_errno = LZ_data_error; /* bad version or bad dict size */
+ else
+ d->lz_errno = LZ_library_error;
d->fatal = true;
return -1;
}
@@ -469,10 +477,10 @@ int LZ_decompress_read( struct LZ_Decoder * const d,
result = LZd_decode_member( d->lz_decoder );
if( result != 0 )
{
- if( result == 2 )
- { d->lz_errno = LZ_unexpected_eof;
- d->rdec->member_position += Cb_used_bytes( &d->rdec->cb );
- Cb_reset( &d->rdec->cb ); }
+ if( result == 2 ) /* set position at EOF */
+ { d->rdec->member_position += Cb_used_bytes( &d->rdec->cb );
+ Cb_reset( &d->rdec->cb );
+ d->lz_errno = LZ_unexpected_eof; }
else if( result == 5 ) d->lz_errno = LZ_library_error;
else d->lz_errno = LZ_data_error;
d->fatal = true;
diff --git a/lzlib.h b/lzlib.h
index a58c851..1eed1e0 100644
--- a/lzlib.h
+++ b/lzlib.h
@@ -1,5 +1,5 @@
/* Lzlib - Compression library for the lzip format
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This library is free software. Redistribution and use in source and
binary forms, with or without modification, are permitted provided
@@ -23,7 +23,7 @@ extern "C" {
#define LZ_API_VERSION 1
-static const char * const LZ_version_string = "1.9";
+static const char * const LZ_version_string = "1.10";
enum LZ_Errno { LZ_ok = 0, LZ_bad_argument, LZ_mem_error,
LZ_sequence_error, LZ_header_error, LZ_unexpected_eof,
diff --git a/main.c b/main.c
index 633456b..3e3e411 100644
--- a/main.c
+++ b/main.c
@@ -1,5 +1,5 @@
/* Minilzip - Test program for the lzlib library
- Copyright (C) 2009-2017 Antonio Diaz Diaz.
+ Copyright (C) 2009-2018 Antonio Diaz Diaz.
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -79,7 +79,7 @@ int verbosity = 0;
const char * const Program_name = "Minilzip";
const char * const program_name = "minilzip";
-const char * const program_year = "2017";
+const char * const program_year = "2018";
const char * invocation_name = 0;
const struct { const char * from; const char * to; } known_extensions[] = {
@@ -100,9 +100,79 @@ int outfd = -1;
bool delete_output_on_interrupt = false;
+static void show_help( void )
+ {
+ printf( "%s - Test program for the lzlib library.\n", Program_name );
+ printf( "\nUsage: %s [options] [files]\n", invocation_name );
+ printf( "\nOptions:\n"
+ " -h, --help display this help and exit\n"
+ " -V, --version output version information and exit\n"
+ " -a, --trailing-error exit with error status if trailing data\n"
+ " -b, --member-size=<bytes> set member size limit in bytes\n"
+ " -c, --stdout write to standard output, keep input files\n"
+ " -d, --decompress decompress\n"
+ " -f, --force overwrite existing output files\n"
+ " -F, --recompress force re-compression of compressed files\n"
+ " -k, --keep keep (don't delete) input files\n"
+ " -m, --match-length=<bytes> set match length limit in bytes [36]\n"
+ " -o, --output=<file> if reading standard input, write to <file>\n"
+ " -q, --quiet suppress all messages\n"
+ " -s, --dictionary-size=<bytes> set dictionary size limit in bytes [8 MiB]\n"
+ " -S, --volume-size=<bytes> set volume size limit in bytes, implies -k\n"
+ " -t, --test test compressed file integrity\n"
+ " -v, --verbose be verbose (a 2nd -v gives more)\n"
+ " -0 .. -9 set compression level [default 6]\n"
+ " --fast alias for -0\n"
+ " --best alias for -9\n"
+ " --loose-trailing allow trailing data seeming corrupt header\n"
+ "If no file names are given, or if a file is '-', minilzip compresses or\n"
+ "decompresses from standard input to standard output.\n"
+ "Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,\n"
+ "Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...\n"
+ "Dictionary sizes 12 to 29 are interpreted as powers of two, meaning 2^12\n"
+ "to 2^29 bytes.\n"
+ "\nThe bidimensional parameter space of LZMA can't be mapped to a linear\n"
+ "scale optimal for all files. If your files are large, very repetitive,\n"
+ "etc, you may need to use the --dictionary-size and --match-length\n"
+ "options directly to achieve optimal performance.\n"
+ "\nExit status: 0 for a normal exit, 1 for environmental problems (file\n"
+ "not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n"
+ "invalid input file, 3 for an internal consistency error (eg, bug) which\n"
+ "caused minilzip to panic.\n"
+ "\nReport bugs to lzip-bug@nongnu.org\n"
+ "Lzlib home page: http://www.nongnu.org/lzip/lzlib.html\n" );
+ }
+
+
+static void show_version( void )
+ {
+ printf( "%s %s\n", program_name, PROGVERSION );
+ printf( "Copyright (C) %s Antonio Diaz Diaz.\n", program_year );
+ printf( "Using lzlib %s\n", LZ_version() );
+ printf( "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>\n"
+ "This is free software: you are free to change and redistribute it.\n"
+ "There is NO WARRANTY, to the extent permitted by law.\n" );
+ }
+
+
+/* assure at least a minimum size for buffer 'buf' */
+static void * resize_buffer( void * buf, const unsigned min_size )
+ {
+ if( buf ) buf = realloc( buf, min_size );
+ else buf = malloc( min_size );
+ if( !buf )
+ {
+ show_error( "Not enough memory.", 0, false );
+ cleanup_and_fail( 1 );
+ }
+ return buf;
+ }
+
+
struct Pretty_print
{
const char * name;
+ char * padded_name;
const char * stdin_name;
unsigned longest_name;
bool first_post;
@@ -110,11 +180,12 @@ struct Pretty_print
static void Pp_init( struct Pretty_print * const pp,
const char * const filenames[],
- const int num_filenames, const int verbosity )
+ const int num_filenames )
{
unsigned stdin_name_len;
int i;
pp->name = 0;
+ pp->padded_name = 0;
pp->stdin_name = "(stdin)";
pp->longest_name = 0;
pp->first_post = false;
@@ -133,9 +204,19 @@ static void Pp_init( struct Pretty_print * const pp,
static inline void Pp_set_name( struct Pretty_print * const pp,
const char * const filename )
{
+ unsigned name_len, padded_name_len, i = 0;
+
if( filename && filename[0] && strcmp( filename, "-" ) != 0 )
pp->name = filename;
else pp->name = pp->stdin_name;
+ name_len = strlen( pp->name );
+ padded_name_len = max( name_len, pp->longest_name ) + 4;
+ pp->padded_name = resize_buffer( pp->padded_name, padded_name_len + 1 );
+ while( i < 2 ) pp->padded_name[i++] = ' ';
+ while( i < name_len + 2 ) { pp->padded_name[i] = pp->name[i-2]; ++i; }
+ pp->padded_name[i++] = ':';
+ while( i < padded_name_len ) pp->padded_name[i++] = ' ';
+ pp->padded_name[i] = 0;
pp->first_post = true;
}
@@ -148,11 +229,8 @@ static void Pp_show_msg( struct Pretty_print * const pp, const char * const msg
{
if( pp->first_post )
{
- unsigned i;
pp->first_post = false;
- fprintf( stderr, " %s: ", pp->name );
- for( i = strlen( pp->name ); i < pp->longest_name; ++i )
- fputc( ' ', stderr );
+ fputs( pp->padded_name, stderr );
if( !msg ) fflush( stderr );
}
if( msg ) fprintf( stderr, "%s\n", msg );
@@ -160,77 +238,20 @@ static void Pp_show_msg( struct Pretty_print * const pp, const char * const msg
}
-static void show_help( void )
- {
- printf( "%s - Test program for the lzlib library.\n", Program_name );
- printf( "\nUsage: %s [options] [files]\n", invocation_name );
- printf( "\nOptions:\n"
- " -h, --help display this help and exit\n"
- " -V, --version output version information and exit\n"
- " -a, --trailing-error exit with error status if trailing data\n"
- " -b, --member-size=<bytes> set member size limit in bytes\n"
- " -c, --stdout write to standard output, keep input files\n"
- " -d, --decompress decompress\n"
- " -f, --force overwrite existing output files\n"
- " -F, --recompress force re-compression of compressed files\n"
- " -k, --keep keep (don't delete) input files\n"
- " -m, --match-length=<bytes> set match length limit in bytes [36]\n"
- " -o, --output=<file> if reading standard input, write to <file>\n"
- " -q, --quiet suppress all messages\n"
- " -s, --dictionary-size=<bytes> set dictionary size limit in bytes [8 MiB]\n"
- " -S, --volume-size=<bytes> set volume size limit in bytes\n"
- " -t, --test test compressed file integrity\n"
- " -v, --verbose be verbose (a 2nd -v gives more)\n"
- " -0 .. -9 set compression level [default 6]\n"
- " --fast alias for -0\n"
- " --best alias for -9\n"
- "If no file names are given, or if a file is '-', minilzip compresses or\n"
- "decompresses from standard input to standard output.\n"
- "Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,\n"
- "Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...\n"
- "Dictionary sizes 12 to 29 are interpreted as powers of two, meaning 2^12\n"
- "to 2^29 bytes.\n"
- "\nThe bidimensional parameter space of LZMA can't be mapped to a linear\n"
- "scale optimal for all files. If your files are large, very repetitive,\n"
- "etc, you may need to use the --dictionary-size and --match-length\n"
- "options directly to achieve optimal performance.\n"
- "\nExit status: 0 for a normal exit, 1 for environmental problems (file\n"
- "not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n"
- "invalid input file, 3 for an internal consistency error (eg, bug) which\n"
- "caused minilzip to panic.\n"
- "\nReport bugs to lzip-bug@nongnu.org\n"
- "Lzlib home page: http://www.nongnu.org/lzip/lzlib.html\n" );
- }
-
-
-static void show_version( void )
- {
- printf( "%s %s\n", program_name, PROGVERSION );
- printf( "Copyright (C) %s Antonio Diaz Diaz.\n", program_year );
- printf( "Using lzlib %s\n", LZ_version() );
- printf( "License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>\n"
- "This is free software: you are free to change and redistribute it.\n"
- "There is NO WARRANTY, to the extent permitted by law.\n" );
- }
-
-
static void show_header( const unsigned dictionary_size )
{
- if( verbosity >= 3 )
- {
- enum { factor = 1024 };
- const char * const prefix[8] =
- { "Ki", "Mi", "Gi", "Ti", "Pi", "Ei", "Zi", "Yi" };
- const char * p = "";
- const char * np = " ";
- unsigned num = dictionary_size, i;
- bool exact = ( num % factor == 0 );
-
- for( i = 0; i < 8 && ( num > 9999 || ( exact && num >= factor ) ); ++i )
- { num /= factor; if( num % factor != 0 ) exact = false;
- p = prefix[i]; np = ""; }
- fprintf( stderr, "dictionary %s%4u %sB. ", np, num, p );
- }
+ enum { factor = 1024 };
+ const char * const prefix[8] =
+ { "Ki", "Mi", "Gi", "Ti", "Pi", "Ei", "Zi", "Yi" };
+ const char * p = "";
+ const char * np = " ";
+ unsigned num = dictionary_size;
+ bool exact = ( num % factor == 0 );
+
+ int i; for( i = 0; i < 8 && ( num > 9999 || ( exact && num >= factor ) ); ++i )
+ { num /= factor; if( num % factor != 0 ) exact = false;
+ p = prefix[i]; np = ""; }
+ fprintf( stderr, "dictionary %s%4u %sB, ", np, num, p );
}
@@ -317,6 +338,43 @@ static int extension_index( const char * const name )
}
+static void set_c_outname( const char * const name, const bool force_ext,
+ const bool multifile )
+ {
+ output_filename = resize_buffer( output_filename, strlen( name ) + 5 +
+ strlen( known_extensions[0].from ) + 1 );
+ strcpy( output_filename, name );
+ if( multifile ) strcat( output_filename, "00001" );
+ if( force_ext || multifile || extension_index( output_filename ) < 0 )
+ strcat( output_filename, known_extensions[0].from );
+ }
+
+
+static void set_d_outname( const char * const name, const int eindex )
+ {
+ const unsigned name_len = strlen( name );
+ if( eindex >= 0 )
+ {
+ const char * const from = known_extensions[eindex].from;
+ const unsigned from_len = strlen( from );
+ if( name_len > from_len )
+ {
+ output_filename = resize_buffer( output_filename, name_len +
+ strlen( known_extensions[eindex].to ) + 1 );
+ strcpy( output_filename, name );
+ strcpy( output_filename + name_len - from_len, known_extensions[eindex].to );
+ return;
+ }
+ }
+ output_filename = resize_buffer( output_filename, name_len + 4 + 1 );
+ strcpy( output_filename, name );
+ strcat( output_filename, ".out" );
+ if( verbosity >= 1 )
+ fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'\n",
+ program_name, name, output_filename );
+ }
+
+
static int open_instream( const char * const name, struct stat * const in_statsp,
const enum Mode program_mode, const int eindex,
const bool recompress, const bool to_stdout )
@@ -357,55 +415,6 @@ static int open_instream( const char * const name, struct stat * const in_statsp
}
-/* assure at least a minimum size for buffer 'buf' */
-static void * resize_buffer( void * buf, const unsigned min_size )
- {
- if( buf ) buf = realloc( buf, min_size );
- else buf = malloc( min_size );
- if( !buf )
- {
- show_error( "Not enough memory.", 0, false );
- cleanup_and_fail( 1 );
- }
- return buf;
- }
-
-
-static void set_c_outname( const char * const name, const bool multifile )
- {
- output_filename = resize_buffer( output_filename, strlen( name ) + 5 +
- strlen( known_extensions[0].from ) + 1 );
- strcpy( output_filename, name );
- if( multifile ) strcat( output_filename, "00001" );
- strcat( output_filename, known_extensions[0].from );
- }
-
-
-static void set_d_outname( const char * const name, const int eindex )
- {
- const unsigned name_len = strlen( name );
- if( eindex >= 0 )
- {
- const char * const from = known_extensions[eindex].from;
- const unsigned from_len = strlen( from );
- if( name_len > from_len )
- {
- output_filename = resize_buffer( output_filename, name_len +
- strlen( known_extensions[eindex].to ) + 1 );
- strcpy( output_filename, name );
- strcpy( output_filename + name_len - from_len, known_extensions[eindex].to );
- return;
- }
- }
- output_filename = resize_buffer( output_filename, name_len + 4 + 1 );
- strcpy( output_filename, name );
- strcat( output_filename, ".out" );
- if( verbosity >= 1 )
- fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'\n",
- program_name, name, output_filename );
- }
-
-
static bool open_outstream( const bool force, const bool from_stdin )
{
const mode_t usr_rw = S_IRUSR | S_IWUSR;
@@ -552,8 +561,8 @@ static bool next_filename( void )
static int do_compress( struct LZ_Encoder * const encoder,
const unsigned long long member_size,
- const unsigned long long volume_size,
- const int infd, struct Pretty_print * const pp,
+ const unsigned long long volume_size, const int infd,
+ struct Pretty_print * const pp,
const struct stat * const in_statsp )
{
unsigned long long partial_volume_size = 0;
@@ -597,7 +606,8 @@ static int do_compress( struct LZ_Encoder * const encoder,
return 1;
}
}
- else if( in_size == 0 ) internal_error( "library error (LZ_compress_read)." );
+ else if( in_size == 0 )
+ internal_error( "library error (LZ_compress_read)." );
if( LZ_compress_member_finished( encoder ) )
{
unsigned long long size;
@@ -638,11 +648,11 @@ static int do_compress( struct LZ_Encoder * const encoder,
if( in_size == 0 || out_size == 0 )
fputs( " no data compressed.\n", stderr );
else
- fprintf( stderr, "%6.3f:1, %6.3f bits/byte, "
- "%5.2f%% saved, %llu in, %llu out.\n",
+ fprintf( stderr, "%6.3f:1, %5.2f%% ratio, %5.2f%% saved, "
+ "%llu in, %llu out.\n",
(double)in_size / out_size,
- ( 8.0 * out_size ) / in_size,
- 100.0 * ( 1.0 - ( (double)out_size / in_size ) ),
+ ( 100.0 * out_size ) / in_size,
+ 100.0 - ( ( 100.0 * out_size ) / in_size ),
in_size, out_size );
}
return 0;
@@ -677,8 +687,8 @@ static int compress( const unsigned long long member_size,
static int do_decompress( struct LZ_Decoder * const decoder, const int infd,
- struct Pretty_print * const pp,
- const bool ignore_trailing, const bool testing )
+ struct Pretty_print * const pp, const bool ignore_trailing,
+ const bool loose_trailing, const bool testing )
{
enum { buffer_size = 65536 };
uint8_t buffer[buffer_size];
@@ -723,73 +733,107 @@ static int do_decompress( struct LZ_Decoder * const decoder, const int infd,
{
const unsigned long long data_size = LZ_decompress_data_position( decoder );
const unsigned long long member_size = LZ_decompress_member_position( decoder );
- Pp_show_msg( pp, 0 );
- show_header( LZ_decompress_dictionary_size( decoder ) );
- if( verbosity >= 2 && data_size > 0 && member_size > 0 )
- fprintf( stderr, "%6.3f:1, %6.3f bits/byte, %5.2f%% saved. ",
+ if( verbosity >= 2 || ( verbosity == 1 && first_member ) )
+ Pp_show_msg( pp, 0 );
+ if( verbosity >= 2 )
+ {
+ if( verbosity >= 4 )
+ show_header( LZ_decompress_dictionary_size( decoder ) );
+ if( data_size == 0 || member_size == 0 )
+ fputs( "no data compressed. ", stderr );
+ else
+ fprintf( stderr, "%6.3f:1, %5.2f%% ratio, %5.2f%% saved. ",
(double)data_size / member_size,
- ( 8.0 * member_size ) / data_size,
- 100.0 * ( 1.0 - ( (double)member_size / data_size ) ) );
- if( verbosity >= 4 )
- fprintf( stderr, "CRC %08X, decompressed %9llu, compressed %8llu. ",
- LZ_decompress_data_crc( decoder ), data_size, member_size );
- fputs( testing ? "ok\n" : "done\n", stderr );
+ ( 100.0 * member_size ) / data_size,
+ 100.0 - ( ( 100.0 * member_size ) / data_size ) );
+ if( verbosity >= 4 )
+ fprintf( stderr, "CRC %08X, ", LZ_decompress_data_crc( decoder ) );
+ if( verbosity >= 3 )
+ fprintf( stderr, "decompressed %9llu, compressed %8llu. ",
+ data_size, member_size );
+ fputs( testing ? "ok\n" : "done\n", stderr ); Pp_reset( pp );
+ }
}
- first_member = false; Pp_reset( pp );
+ first_member = false;
}
if( rd <= 0 ) break;
}
if( out_size < 0 || ( first_member && out_size == 0 ) )
{
+ const unsigned long long member_pos = LZ_decompress_member_position( decoder );
const enum LZ_Errno lz_errno = LZ_decompress_errno( decoder );
- if( lz_errno == LZ_unexpected_eof &&
- LZ_decompress_member_position( decoder ) <= 6 )
- { Pp_show_msg( pp, "File ends unexpectedly at member header." );
- return 2; }
+ if( lz_errno == LZ_library_error )
+ internal_error( "library error (LZ_decompress_read)." );
+ if( member_pos <= 6 )
+ {
+ if( lz_errno == LZ_unexpected_eof )
+ {
+ if( first_member )
+ show_file_error( pp->name, "File ends unexpectedly at member header.", 0 );
+ else
+ Pp_show_msg( pp, "Truncated header in multimember file." );
+ return 2;
+ }
+ else if( lz_errno == LZ_data_error )
+ {
+ if( member_pos == 4 )
+ { if( verbosity >= 0 )
+ { Pp_show_msg( pp, 0 );
+ fprintf( stderr, "Version %d member format not supported.\n",
+ LZ_decompress_member_version( decoder ) ); } }
+ else if( member_pos == 5 )
+ Pp_show_msg( pp, "Invalid dictionary size in member header." );
+ else if( first_member ) /* for lzlib older than 1.10 */
+ Pp_show_msg( pp, "Bad version or dictionary size in member header." );
+ else if( !loose_trailing )
+ Pp_show_msg( pp, "Corrupt header in multimember file." );
+ else if( !ignore_trailing )
+ Pp_show_msg( pp, "Trailing data not allowed." );
+ else break; /* trailing data */
+ return 2;
+ }
+ }
if( lz_errno == LZ_header_error )
{
if( first_member )
- { show_file_error( pp->name,
- "Bad magic number (file not in lzip format).", 0 );
- return 2; }
+ show_file_error( pp->name,
+ "Bad magic number (file not in lzip format).", 0 );
else if( !ignore_trailing )
- { show_file_error( pp->name, "Trailing data not allowed.", 0 );
- return 2; }
- break;
+ Pp_show_msg( pp, "Trailing data not allowed." );
+ else break; /* trailing data */
+ return 2;
}
if( lz_errno == LZ_mem_error )
{ Pp_show_msg( pp, "Not enough memory." ); return 1; }
if( verbosity >= 0 )
{
Pp_show_msg( pp, 0 );
- if( lz_errno == LZ_unexpected_eof )
- fprintf( stderr, "File ends unexpectedly at pos %llu\n",
- LZ_decompress_total_in_size( decoder ) );
- else
- fprintf( stderr, "Decoder error at pos %llu: %s\n",
- LZ_decompress_total_in_size( decoder ),
- LZ_strerror( LZ_decompress_errno( decoder ) ) );
+ fprintf( stderr, "%s at pos %llu\n", ( lz_errno == LZ_unexpected_eof ) ?
+ "File ends unexpectedly" : "Decoder error",
+ LZ_decompress_total_in_size( decoder ) );
}
return 2;
}
if( LZ_decompress_finished( decoder ) == 1 ) break;
if( in_size == 0 && out_size == 0 )
- internal_error( "library error (LZ_decompress_read)." );
+ internal_error( "library error (stalled)." );
}
+ if( verbosity == 1 ) fputs( testing ? "ok\n" : "done\n", stderr );
return 0;
}
static int decompress( const int infd, struct Pretty_print * const pp,
- const bool ignore_trailing, const bool testing )
+ const bool ignore_trailing,
+ const bool loose_trailing, const bool testing )
{
struct LZ_Decoder * const decoder = LZ_decompress_open();
int retval;
if( !decoder || LZ_decompress_errno( decoder ) != LZ_ok )
{ Pp_show_msg( pp, "Not enough memory." ); retval = 1; }
- else retval = do_decompress( decoder, infd, pp, ignore_trailing, testing );
-
+ else retval = do_decompress( decoder, infd, pp, ignore_trailing,
+ loose_trailing, testing );
LZ_decompress_close( decoder );
return retval;
}
@@ -868,50 +912,53 @@ int main( const int argc, const char * const argv[] )
const char * default_output_filename = "";
const char ** filenames = 0;
int num_filenames = 0;
- int infd = -1;
enum Mode program_mode = m_compress;
int argind = 0;
+ int failed_tests = 0;
int retval = 0;
int i;
bool filenames_given = false;
bool force = false;
bool ignore_trailing = true;
bool keep_input_files = false;
+ bool loose_trailing = false;
bool recompress = false;
bool stdin_used = false;
bool to_stdout = false;
struct Pretty_print pp;
+ enum { opt_lt = 256 };
const struct ap_Option options[] =
{
- { '0', "fast", ap_no },
- { '1', 0, ap_no },
- { '2', 0, ap_no },
- { '3', 0, ap_no },
- { '4', 0, ap_no },
- { '5', 0, ap_no },
- { '6', 0, ap_no },
- { '7', 0, ap_no },
- { '8', 0, ap_no },
- { '9', "best", ap_no },
- { 'a', "trailing-error", ap_no },
- { 'b', "member-size", ap_yes },
- { 'c', "stdout", ap_no },
- { 'd', "decompress", ap_no },
- { 'f', "force", ap_no },
- { 'F', "recompress", ap_no },
- { 'h', "help", ap_no },
- { 'k', "keep", ap_no },
- { 'm', "match-length", ap_yes },
- { 'n', "threads", ap_yes },
- { 'o', "output", ap_yes },
- { 'q', "quiet", ap_no },
- { 's', "dictionary-size", ap_yes },
- { 'S', "volume-size", ap_yes },
- { 't', "test", ap_no },
- { 'v', "verbose", ap_no },
- { 'V', "version", ap_no },
- { 0 , 0, ap_no } };
+ { '0', "fast", ap_no },
+ { '1', 0, ap_no },
+ { '2', 0, ap_no },
+ { '3', 0, ap_no },
+ { '4', 0, ap_no },
+ { '5', 0, ap_no },
+ { '6', 0, ap_no },
+ { '7', 0, ap_no },
+ { '8', 0, ap_no },
+ { '9', "best", ap_no },
+ { 'a', "trailing-error", ap_no },
+ { 'b', "member-size", ap_yes },
+ { 'c', "stdout", ap_no },
+ { 'd', "decompress", ap_no },
+ { 'f', "force", ap_no },
+ { 'F', "recompress", ap_no },
+ { 'h', "help", ap_no },
+ { 'k', "keep", ap_no },
+ { 'm', "match-length", ap_yes },
+ { 'n', "threads", ap_yes },
+ { 'o', "output", ap_yes },
+ { 'q', "quiet", ap_no },
+ { 's', "dictionary-size", ap_yes },
+ { 'S', "volume-size", ap_yes },
+ { 't', "test", ap_no },
+ { 'v', "verbose", ap_no },
+ { 'V', "version", ap_no },
+ { opt_lt, "loose-trailing", ap_no },
+ { 0 , 0, ap_no } };
struct Arg_parser parser;
@@ -957,6 +1004,7 @@ int main( const int argc, const char * const argv[] )
case 't': program_mode = m_test; break;
case 'v': if( verbosity < 4 ) ++verbosity; break;
case 'V': show_version(); return 0;
+ case opt_lt: loose_trailing = true; break;
default : internal_error( "uncaught option." );
}
} /* end process options */
@@ -983,12 +1031,13 @@ int main( const int argc, const char * const argv[] )
( filenames_given || default_output_filename[0] ) )
set_signals();
- Pp_init( &pp, filenames, num_filenames, verbosity );
+ Pp_init( &pp, filenames, num_filenames );
output_filename = resize_buffer( output_filename, 1 );
for( i = 0; i < num_filenames; ++i )
{
const char * input_filename = "";
+ int infd;
int tmp;
struct stat in_stats;
const struct stat * in_statsp;
@@ -1005,17 +1054,17 @@ int main( const int argc, const char * const argv[] )
else
{
if( program_mode == m_compress )
- set_c_outname( default_output_filename, volume_size > 0 );
+ set_c_outname( default_output_filename, false, volume_size > 0 );
else
{
output_filename = resize_buffer( output_filename,
- strlen( default_output_filename ) + 1 );
+ strlen( default_output_filename ) + 1 );
strcpy( output_filename, default_output_filename );
}
if( !open_outstream( force, true ) )
{
if( retval < 1 ) retval = 1;
- close( infd ); infd = -1;
+ close( infd );
continue;
}
}
@@ -1033,12 +1082,12 @@ int main( const int argc, const char * const argv[] )
else
{
if( program_mode == m_compress )
- set_c_outname( input_filename, volume_size > 0 );
+ set_c_outname( input_filename, true, volume_size > 0 );
else set_d_outname( input_filename, eindex );
if( !open_outstream( force, false ) )
{
if( retval < 1 ) retval = 1;
- close( infd ); infd = -1;
+ close( infd );
continue;
}
}
@@ -1049,7 +1098,7 @@ int main( const int argc, const char * const argv[] )
if( !check_tty( pp.name, infd, program_mode ) )
{
if( retval < 1 ) retval = 1;
- if( program_mode == m_test ) { close( infd ); infd = -1; continue; }
+ if( program_mode == m_test ) { close( infd ); continue; }
cleanup_and_fail( retval );
}
@@ -1058,24 +1107,32 @@ int main( const int argc, const char * const argv[] )
tmp = compress( member_size, volume_size, infd, &encoder_options, &pp,
in_statsp );
else
- tmp = decompress( infd, &pp, ignore_trailing, program_mode == m_test );
+ tmp = decompress( infd, &pp, ignore_trailing,
+ loose_trailing, program_mode == m_test );
if( tmp > retval ) retval = tmp;
- if( tmp && program_mode != m_test ) cleanup_and_fail( retval );
+ if( tmp )
+ { if( program_mode != m_test ) cleanup_and_fail( retval );
+ else ++failed_tests; }
if( delete_output_on_interrupt )
close_and_set_permissions( in_statsp );
if( input_filename[0] )
{
- close( infd ); infd = -1;
- if( !keep_input_files && !to_stdout && program_mode != m_test )
+ close( infd );
+ if( !keep_input_files && !to_stdout && program_mode != m_test &&
+ ( program_mode != m_compress || volume_size == 0 ) )
remove( input_filename );
}
}
if( outfd >= 0 && close( outfd ) != 0 )
{
- show_error( "Can't close stdout", errno, false );
+ show_error( "Error closing stdout", errno, false );
if( retval < 1 ) retval = 1;
}
+ if( failed_tests > 0 && verbosity >= 1 && num_filenames > 1 )
+ fprintf( stderr, "%s: warning: %d %s failed the test.\n",
+ program_name, failed_tests,
+ ( failed_tests == 1 ) ? "file" : "files" );
free( output_filename );
free( filenames );
ap_free( &parser );
diff --git a/testsuite/check.sh b/testsuite/check.sh
index 037e2c9..929a690 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -1,6 +1,6 @@
#! /bin/sh
-# check script for Lzlib - A compression library for lzip files
-# Copyright (C) 2009-2017 Antonio Diaz Diaz.
+# check script for Lzlib - Compression library for the lzip format
+# Copyright (C) 2009-2018 Antonio Diaz Diaz.
#
# This script is free software: you have unlimited permission
# to copy, distribute and modify it.
@@ -54,6 +54,8 @@ done
[ $? = 2 ] || test_failed $LINENO
"${LZIP}" -cdq < in
[ $? = 2 ] || test_failed $LINENO
+"${LZIP}" -dq -o in < "${in_lz}"
+[ $? = 1 ] || test_failed $LINENO
# these are for code coverage
"${LZIP}" -t -- nx_file 2> /dev/null
[ $? = 1 ] || test_failed $LINENO
@@ -97,6 +99,11 @@ printf "to be overwritten" > copy || framework_failure
"${LZIP}" -df copy.lz
{ [ $? = 0 ] && [ ! -e copy.lz ] && cmp in copy ; } || test_failed $LINENO
+rm -f copy
+cat "${in_lz}" > copy.lz || framework_failure
+"${LZIP}" -d -S100k copy.lz
+{ [ $? = 0 ] && [ ! -e copy.lz ] && cmp in copy ; } || test_failed $LINENO
+
printf "to be overwritten" > copy || framework_failure
"${LZIP}" -df -o copy < "${in_lz}" || test_failed $LINENO
cmp in copy || test_failed $LINENO
@@ -136,7 +143,7 @@ cat "${in_lz}" "${in_lz}" > in2.lz || framework_failure
"${LZIP}" -cd in2.lz > copy2 || test_failed $LINENO
cmp in2 copy2 || test_failed $LINENO
-"${LZIP}" -s16 --output=copy2 < in2 || test_failed $LINENO
+"${LZIP}" -s16 --output=copy2.lz < in2 || test_failed $LINENO
"${LZIP}" -t copy2.lz || test_failed $LINENO
"${LZIP}" -cd copy2.lz > copy2 || test_failed $LINENO
cmp in2 copy2 || test_failed $LINENO
@@ -192,10 +199,14 @@ for i in s4Ki 0 1 2 3 4 5 6 7 8 9 ; do
done
cat in in in in in in in in > in8 || framework_failure
-"${LZIP}" -1s12 -S100k -o out < in8 || test_failed $LINENO
-"${LZIP}" -t out00001.lz out00002.lz || test_failed $LINENO
-"${LZIP}" -cd out00001.lz out00002.lz | cmp in8 - || test_failed $LINENO
-rm -f out00001.lz
+"${LZIP}" -1s12 -S100k in8 || test_failed $LINENO
+"${LZIP}" -t in800001.lz in800002.lz || test_failed $LINENO
+"${LZIP}" -cd in800001.lz in800002.lz | cmp in8 - || test_failed $LINENO
+rm -f in800001.lz in800002.lz
+"${LZIP}" -1s12 -S100k -o out.lz < in8 || test_failed $LINENO
+"${LZIP}" -t out.lz00001.lz out.lz00002.lz || test_failed $LINENO
+"${LZIP}" -cd out.lz00001.lz out.lz00002.lz | cmp in8 - || test_failed $LINENO
+rm -f out.lz00001.lz out.lz00002.lz
"${LZIP}" -1ks4Ki -b100000 in8 || test_failed $LINENO
"${LZIP}" -t in8.lz || test_failed $LINENO
"${LZIP}" -cd in8.lz | cmp in8 - || test_failed $LINENO
@@ -203,7 +214,15 @@ rm -f in8
"${LZIP}" -0 -S100k -o out < in8.lz || test_failed $LINENO
"${LZIP}" -t out00001.lz out00002.lz || test_failed $LINENO
"${LZIP}" -cd out00001.lz out00002.lz | cmp in8.lz - || test_failed $LINENO
+rm -f out00001.lz
+"${LZIP}" -1 -S100k -o out < in8.lz || test_failed $LINENO
+"${LZIP}" -t out00001.lz out00002.lz || test_failed $LINENO
+"${LZIP}" -cd out00001.lz out00002.lz | cmp in8.lz - || test_failed $LINENO
rm -f out00001.lz out00002.lz
+"${LZIP}" -0 -F -S100k in8.lz || test_failed $LINENO
+"${LZIP}" -t in8.lz00001.lz in8.lz00002.lz || test_failed $LINENO
+"${LZIP}" -cd in8.lz00001.lz in8.lz00002.lz | cmp in8.lz - || test_failed $LINENO
+rm -f in8.lz00001.lz in8.lz00002.lz
"${LZIP}" -0kF -b100k in8.lz || test_failed $LINENO
"${LZIP}" -t in8.lz.lz || test_failed $LINENO
"${LZIP}" -cd in8.lz.lz | cmp in8.lz - || test_failed $LINENO
@@ -219,12 +238,37 @@ rm -f in8.lz in8.lz.lz
printf "\ntesting bad input..."
+headers='LZIp LZiP LZip LzIP LzIp LziP lZIP lZIp lZiP lzIP'
+body='\001\014\000\203\377\373\377\377\300\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000$\000\000\000\000\000\000\000'
+cat "${in_lz}" > in0.lz
+printf "LZIP${body}" >> in0.lz
+if "${LZIP}" -tq in0.lz ; then
+ for header in ${headers} ; do
+ printf "${header}${body}" > in0.lz # first member
+ "${LZIP}" -tq in0.lz
+ [ $? = 2 ] || test_failed $LINENO ${header}
+ "${LZIP}" -tq --loose-trailing in0.lz
+ [ $? = 2 ] || test_failed $LINENO ${header}
+ cat "${in_lz}" > in0.lz
+ printf "${header}${body}" >> in0.lz # trailing data
+ "${LZIP}" -tq in0.lz
+ [ $? = 2 ] || test_failed $LINENO ${header}
+ "${LZIP}" -t --loose-trailing in0.lz
+ [ $? = 0 ] || test_failed $LINENO ${header}
+ "${LZIP}" -tq --loose-trailing --trailing-error in0.lz
+ [ $? = 2 ] || test_failed $LINENO ${header}
+ done
+else
+ printf "\nwarning: skipping header test: 'printf' does not work on your system."
+fi
+rm -f in0.lz
+
cat "${in_lz}" "${in_lz}" "${in_lz}" > in3.lz || framework_failure
if dd if=in3.lz of=trunc.lz bs=14752 count=1 2> /dev/null &&
[ -e trunc.lz ] && cmp in2.lz trunc.lz > /dev/null 2>&1 ; then
for i in 6 20 14734 14753 14754 14755 14756 14757 14758 ; do
dd if=in3.lz of=trunc.lz bs=$i count=1 2> /dev/null
- "${LZIP}" -t trunc.lz 2> /dev/null
+ "${LZIP}" -tq trunc.lz
[ $? = 2 ] || test_failed $LINENO $i
"${LZIP}" -tq < trunc.lz
[ $? = 2 ] || test_failed $LINENO $i
@@ -236,6 +280,7 @@ if dd if=in3.lz of=trunc.lz bs=14752 count=1 2> /dev/null &&
else
printf "\nwarning: skipping truncation test: 'dd' does not work on your system."
fi
+rm -f in3.lz trunc.lz
cat "${in_lz}" > ingin.lz || framework_failure
printf "g" >> ingin.lz || framework_failure
@@ -246,6 +291,7 @@ cmp in copy || test_failed $LINENO
"${LZIP}" -t < ingin.lz || test_failed $LINENO
"${LZIP}" -d < ingin.lz > copy || test_failed $LINENO
cmp in copy || test_failed $LINENO
+rm -f ingin.lz
echo
if [ ${fail} = 0 ] ; then